aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/accel
AgeCommit message (Collapse)Author
2023-11-28eventfd: simplify eventfd_signal()Christian Brauner
Ever since the eventfd type was introduced back in 2007 in commit e1ad7468c77d ("signal/timer/event: eventfd core") the eventfd_signal() function only ever passed 1 as a value for @n. There's no point in keeping that additional argument. Link: https://lore.kernel.org/r/20231122-vfs-eventfd-signal-v2-2-bd549b14ce0c@kernel.org Acked-by: Xu Yilun <yilun.xu@intel.com> Acked-by: Andrew Donnellan <ajd@linux.ibm.com> # ocxl Acked-by: Eric Farman <farman@linux.ibm.com> # s390 Reviewed-by: Jan Kara <jack@suse.cz> Reviewed-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Christian Brauner <brauner@kernel.org>
2023-11-28Merge v6.7-rc3 into drm-nextDaniel Vetter
Thomas Zimermann needs 8d6ef26501 ("drm/ast: Disconnect BMC if physical connector is connected") for further ast work in -next. Minor conflicts in ivpu between 3de6d9597892 ("accel/ivpu: Pass D0i3 residency time to the VPU firmware") and 3f7c0634926d ("accel/ivpu/37xx: Fix hangs related to MMIO reset") changing adjacent lines. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2023-11-21accel/ivpu/37xx: Fix hangs related to MMIO resetJacek Lawrynowicz
There is no need to call MMIO reset using VPU_37XX_BUTTRESS_VPU_IP_RESET register. IP will be reset by FLR or by entering d0i3. Also IP reset during power_up is not needed as the VPU is already in reset. Removing MMIO reset improves stability as it a partial device reset that is not safe in some corner cases. This change also brings back ivpu_boot_pwr_domain_disable() that helps to properly power down VPU when it is hung by a buggy workload. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Fixes: 828d63042aec ("accel/ivpu: Don't enter d0i3 during FLR") Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231115111004.1304092-1-jacek.lawrynowicz@linux.intel.com
2023-11-17accel/qaic: Update MAX_ORDER use to be inclusiveJeffrey Hugo
MAX_ORDER was redefined so that valid allocations to the page allocator are in the range of 0..MAX_ORDER, inclusive in the commit 23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely"). We are treating MAX_ORDER as an exclusive value, and thus could be requesting larger allocations. Update our use to match the redefinition of MAX_ORDER. Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231103153302.20642-1-quic_jhugo@quicinc.com
2023-11-16accel/ivpu: Use threaded IRQ to handle JOB done messagesJacek Lawrynowicz
Remove job_done thread and replace it with generic callback based mechanism. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231113170252.758137-6-jacek.lawrynowicz@linux.intel.com
2023-11-16accel/ivpu: Use dedicated work for job timeout detectionStanislaw Gruszka
Change to use work for timeout detection. Needed for thread_irq conversion. Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231113170252.758137-5-jacek.lawrynowicz@linux.intel.com
2023-11-16accel/ivpu: Do not use cons->aborted for job_done_threadStanislaw Gruszka
This allow to simplify ivpu_ipc_receive() as now we do not have to process all messages in aborted state - they will be freed in ivpu_ipc_consumer_del(). Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231113170252.758137-4-jacek.lawrynowicz@linux.intel.com
2023-11-16accel/ivpu: Do not use irqsave in ivpu_ipc_dispatchStanislaw Gruszka
ivpu_ipc_dispatch is always called with irqs disabled. Add lockdep assertion and remove unneeded _irqsave/_irqrestore. Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231113170252.758137-3-jacek.lawrynowicz@linux.intel.com
2023-11-16accel/ivpu: Rename cons->rx_msg_lockStanislaw Gruszka
Now the cons->rx_msg_lock also protects 'abort' field so rename the lock. Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231113170252.758137-2-jacek.lawrynowicz@linux.intel.com
2023-11-15accel/ivpu: avoid build failure with CONFIG_PM=nArnd Bergmann
The usage count of struct dev_pm_info is an implementation detail that is only available if CONFIG_PM is enabled, so printing it in a debug message causes a build failure in configurations without PM: In file included from include/linux/device.h:15, from include/linux/pci.h:37, from drivers/accel/ivpu/ivpu_pm.c:8: drivers/accel/ivpu/ivpu_pm.c: In function 'ivpu_rpm_get_if_active': drivers/accel/ivpu/ivpu_pm.c:254:51: error: 'struct dev_pm_info' has no member named 'usage_count' 254 | atomic_read(&vdev->drm.dev->power.usage_count)); | ^ include/linux/dev_printk.h:129:48: note: in definition of macro 'dev_printk' 129 | _dev_printk(level, dev, fmt, ##__VA_ARGS__); \ | ^~~~~~~~~~~ drivers/accel/ivpu/ivpu_drv.h:75:17: note: in expansion of macro 'dev_dbg' 75 | dev_dbg((vdev)->drm.dev, "[%s] " fmt, #type, ##args); \ | ^~~~~~~ drivers/accel/ivpu/ivpu_pm.c:253:9: note: in expansion of macro 'ivpu_dbg' 253 | ivpu_dbg(vdev, RPM, "rpm_get_if_active count %d\n", | ^~~~~~~~ The print message does not seem essential, so the easiest workaround is to just remove it. Fixes: c39dc15191c4 ("accel/ivpu: Read clock rate only if device is up") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231027152633.528490-1-arnd@kernel.org (cherry picked from commit 1470acbef122c7e2e588f6346ce459c26d0568a2) Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
2023-11-15Merge drm/drm-next into drm-misc-nextMaxime Ripard
Let's kickstart the v6.8 release cycle. Signed-off-by: Maxime Ripard <mripard@kernel.org>
2023-11-08accel/ivpu: Use GEM shmem helper for all buffersJacek Lawrynowicz
Use struct drm_gem_shmem_object as a base for struct ivpu_bo. This cuts by 50% the buffer management code. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231031073156.1301669-5-stanislaw.gruszka@linux.intel.com
2023-11-08accel/ivpu: Remove support for uncached buffersJacek Lawrynowicz
Usages of DRM_IVPU_BO_UNCACHED should be replaced by DRM_IVPU_BO_WC. There is no functional benefit from DRM_IVPU_BO_UNCACHED if these buffers are never mapped to host VM. This allows to cut the buffer handling code in the kernel driver by half. Usage of DRM_IVPU_BO_UNCACHED buffers was removed from user-space driver and will not be part of first UMD release. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231031073156.1301669-4-stanislaw.gruszka@linux.intel.com
2023-11-08accel/ivpu: Fix locking in ivpu_bo_remove_all_bos_from_context()Jacek Lawrynowicz
ivpu_bo_remove_all_bos_from_context() could race with ivpu_bo_free() when prime buffer was closed after vpu device was closed. Move the bo_list from context to vdev and use a dedicated lock to sync it. This list is not modified when BO is added/removed from a context. Also rename ivpu_bo_free_vpu_addr() to ivpu_bo_unbind() because this function does more then just free vpu_addr. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231031073156.1301669-3-stanislaw.gruszka@linux.intel.com
2023-11-08accel/ivpu: Allocate vpu_addr in gem->open() callbackJacek Lawrynowicz
Use gem->open() callback to simplify the code and prepare for gem_shmem conversion. It is called during handle creation for a gem object, during prime import and in BO_CREATE ioctl. Hence can be used for vpu_addr allocation. On the way remove unused bo->user_ptr field. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231031073156.1301669-2-stanislaw.gruszka@linux.intel.com
2023-11-07accel/ivpu: Fix compilation with CONFIG_PM=nJacek Lawrynowicz
Use pm_runtime_status_suspended() instead of dev->power.runtime_status field that is not available without PM. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://lore.kernel.org/all/20231106130827.1600948-1-jacek.lawrynowicz@linux.intel.com
2023-11-03accel/qaic: Support for 0 resize slice execution in BOPranjal Ramajor Asha Kanojiya
Add support to partially execute a slice which is resized to zero. Executing a zero size slice in a BO should mean that there is no DMA transfers involved but you should still configure doorbell and semaphores. For example consider a BO of size 18K and it is sliced into 3 6K slices and user calls partial execute ioctl with resize as 10K. slice 0 - size is 6k and offset is 0, so resize of 10K will not cut short this slice hence we send the entire slice for execution. slice 1 - size is 6k and offset is 6k, so resize of 10K will cut short this slice and only the first 4k should be DMA along with configuring doorbell and semaphores. slice 2 - size is 6k and offset is 12k, so resize of 10k will cut short this slice and no DMA transfer would be involved but we should would configure doorbell and semaphores. This change begs to change the behavior of 0 resize. Currently, 0 resize partial execute ioctl behaves exactly like execute ioctl i.e. no resize. After this patch all the slice in BO should behave exactly like slice 2 in above example. Refactor copy_partial_exec_reqs() to make it more readable and less complex. Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231027164330.11978-1-quic_jhugo@quicinc.com
2023-11-03accel/qaic: Quiet array bounds check on DMA abort messageCarl Vanderlip
Current wrapper is right-sized to the message being transferred; however, this is smaller than the structure defining message wrappers since the trailing element is a union of message/transfer headers of various sizes (8 and 32 bytes on 32-bit system where issue was reported). Using the smaller header with a small message (wire_trans_dma_xfer is 24 bytes including header) ends up being smaller than a wrapper with the larger header. There are no accesses outside of the defined size, however they are possible if the larger union member is referenced. Abort messages are outside of hot-path and changing the wrapper struct would require a larger rewrite, so having the memory allocated to the message be 8 bytes too big is acceptable. Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310182253.bcb9JcyJ-lkp@intel.com/ Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231027180810.4873-1-quic_jhugo@quicinc.com
2023-11-02Merge tag 'mm-nonmm-stable-2023-11-02-14-08' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm Pull non-MM updates from Andrew Morton: "As usual, lots of singleton and doubleton patches all over the tree and there's little I can say which isn't in the individual changelogs. The lengthier patch series are - 'kdump: use generic functions to simplify crashkernel reservation in arch', from Baoquan He. This is mainly cleanups and consolidation of the 'crashkernel=' kernel parameter handling - After much discussion, David Laight's 'minmax: Relax type checks in min() and max()' is here. Hopefully reduces some typecasting and the use of min_t() and max_t() - A group of patches from Oleg Nesterov which clean up and slightly fix our handling of reads from /proc/PID/task/... and which remove task_struct.thread_group" * tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits) scripts/gdb/vmalloc: disable on no-MMU scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n .mailmap: add address mapping for Tomeu Vizoso mailmap: update email address for Claudiu Beznea tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions .mailmap: map Benjamin Poirier's address scripts/gdb: add lx_current support for riscv ocfs2: fix a spelling typo in comment proc: test ProtectionKey in proc-empty-vm test proc: fix proc-empty-vm test with vsyscall fs/proc/base.c: remove unneeded semicolon do_io_accounting: use sig->stats_lock do_io_accounting: use __for_each_thread() ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error() ocfs2: fix a typo in a comment scripts/show_delta: add __main__ judgement before main code treewide: mark stuff as __ro_after_init fs: ocfs2: check status values proc: test /proc/${pid}/statm compiler.h: move __is_constexpr() to compiler.h ...
2023-11-01Merge tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drmLinus Torvalds
Pull drm updates from Dave Airlie: "Highlights: - AMD adds some more upcoming HW platforms - Intel made Meteorlake stable and started adding Lunarlake - nouveau has a bunch of display rework in prepartion for the NVIDIA GSP firmware support - msm adds a7xx support - habanalabs has finished migration to accel subsystem Detail summary: kernel: - add initial vmemdup-user-array core: - fix platform remove() to return void - drm_file owner updated to reflect owner - move size calcs to drm buddy allocator - let GPUVM build as a module - allow variable number of run-queues in scheduler edid: - handle bad h/v sync_end in EDIDs panfrost: - add Boris as maintainer fbdev: - use fb_ops helpers more - only allow logo use from fbcon - rename fb_pgproto to pgprot_framebuffer - add HPD state to drm_connector_oob_hotplug_event - convert to fbdev i/o mem helpers i915: - Enable meteorlake by default - Early Xe2 LPD/Lunarlake display enablement - Rework subplatforms into IP version checks - GuC based TLB invalidation for Meteorlake - Display rework for future Xe driver integration - LNL FBC features - LNL display feature capability reads - update recommended fw versions for DG2+ - drop fastboot module parameter - added deviceid for Arrowlake-S - drop preproduction workarounds - don't disable preemption for resets - cleanup inlines in headers - PXP firmware loading fix - Fix sg list lengths - DSC PPS state readout/verification - Add more RPL P/U PCI IDs - Add new DG2-G12 stepping - DP enhanced framing support to state checker - Improve shared link bandwidth management - stop using GEM macros in display code - refactor related code into display code - locally enable W=1 warnings - remove PSR watchdog timers on LNL amdgpu: - RAS/FRU EEPROM updatse - IP discovery updatses - GC 11.5 support - DCN 3.5 support - VPE 6.1 support - NBIO 7.11 support - DML2 support - lots of IP updates - use flexible arrays for bo list handling - W=1 fixes - Enable seamless boot in more cases - Enable context type property for HDMI - Rework GPUVM TLB flushing - VCN IB start/size alignment fixes amdkfd: - GC 10/11 fixes - GC 11.5 support - use partial migration in GPU faults radeon: - W=1 Fixes - fix some possible buffer overflow/NULL derefs nouveau: - update uapi for NO_PREFETCH - scheduler/fence fixes - rework suspend/resume for GSP-RM - rework display in preparation for GSP-RM habanalabs: - uapi: expose tsc clock - uapi: block access to eventfd through control device - uapi: force dma-buf export to PAGE_SIZE alignments - complete move to accel subsystem - move firmware interface include files - perform hard reset on PCIe AXI drain event - optimise user interrupt handling msm: - DP: use existing helpers for DPCD - DPU: interrupts reworked - gpu: a7xx (a730/a740) support - decouple msm_drv from kms for headless devices mediatek: - MT8188 dsi/dp/edp support - DDP GAMMA - 12 bit LUT support - connector dynamic selection capability rockchip: - rv1126 mipi-dsi/vop support - add planar formats ast: - rename constants panels: - Mitsubishi AA084XE01 - JDI LPM102A188A - LTK050H3148W-CTA6 ivpu: - power management fixes qaic: - add detach slice bo api komeda: - add NV12 writeback tegra: - support NVSYNC/NHSYNC - host1x suspend fixes ili9882t: - separate into own driver" * tag 'drm-next-2023-10-31-1' of git://anongit.freedesktop.org/drm/drm: (1803 commits) drm/amdgpu: Remove unused variables from amdgpu_show_fdinfo drm/amdgpu: Remove duplicate fdinfo fields drm/amd/amdgpu: avoid to disable gfxhub interrupt when driver is unloaded drm/amdgpu: Add EXT_COHERENT support for APU and NUMA systems drm/amdgpu: Retrieve CE count from ce_count_lo_chip in EccInfo table drm/amdgpu: Identify data parity error corrected in replay mode drm/amdgpu: Fix typo in IP discovery parsing drm/amd/display: fix S/G display enablement drm/amdxcp: fix amdxcp unloads incompletely drm/amd/amdgpu: fix the GPU power print error in pm info drm/amdgpu: Use pcie domain of xcc acpi objects drm/amd: check num of link levels when update pcie param drm/amdgpu: Add a read to GFX v9.4.3 ring test drm/amd/pm: call smu_cmn_get_smc_version in is_mode1_reset_supported. drm/amdgpu: get RAS poison status from DF v4_6_2 drm/amdgpu: Use discovery table's subrevision drm/amd/display: 3.2.256 drm/amd/display: add interface to query SubVP status drm/amd/display: Read before writing Backlight Mode Set Register drm/amd/display: Disable SYMCLK32_SE RCO on DCN314 ...
2023-10-31accel/ivpu: Rename VPU to NPU in product stringsJacek Lawrynowicz
VPU was rebranded as NPU (Neural Processing Unit) so user facing strings have to be updated but the code remains as is and the module is still called intel_vpu.ko. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-9-stanislaw.gruszka@linux.intel.com
2023-10-31accel/ivpu: Simplify MMU SYNC commandJacek Lawrynowicz
CMD_SYNC does not need any args as we poll for completion anyway. Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-8-stanislaw.gruszka@linux.intel.com
2023-10-31accel/ivpu: Make DMA allocations for MMU600 write combinedKarol Wachowski
Previously using dma_alloc_wc() API we created cache coherent (mapped as write-back) mappings. Because we disable MMU600 snooping it was required to do costly page walk and cache flushes after each page table modification. With write-combined buffers it's possible to do a single write memory barrier to flush write-combined buffer to memory which simplifies the driver and significantly reduce time of map/unmap operations. Mapping time of 255 MB is reduced from 2.5 ms to 500 us. Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-7-stanislaw.gruszka@linux.intel.com
2023-10-31accel/ivpu: Print CMDQ errors after consumer timeoutKarol Wachowski
Add checking of error reason bits in IVPU_MMU_CMDQ_CONS register when waiting for consumer timeout occurred. Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-6-stanislaw.gruszka@linux.intel.com
2023-10-31accel/ivpu: Abort pending rx ipc on resetStanislaw Gruszka
Waking up process, which wait for particular condition, will go to sleep again on wake_up() if the condition is not met. Add abort flag to wake up IPC receivers, which will finish with -ECANCELED error. This is only needed for reset, run time power management prevent to suspend VPU when there is pending IPC processing or pending job. Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-5-stanislaw.gruszka@linux.intel.com
2023-10-31accel/ivpu: Stop job_done_thread on suspendStanislaw Gruszka
Stop job_done thread when going to suspend. Use kthread_park() instead of kthread_stop() to avoid memory allocation and potential failure on resume. Use separate function as thread wake up condition. Use spin lock to assure rx_msg_list is properly protected against concurrent access. This avoid race condition when the rx_msg_list list is modified and read in ivpu_ipc_recive() at the same time. Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-4-stanislaw.gruszka@linux.intel.com
2023-10-31accel/ivpu: Assure device is off if power up sequence failStanislaw Gruszka
We should not leave device half enabled if there is failure somewhere it power up sequence. Fix device init and resume paths. Reviewed-by: Karol Wachowski <karol.wachowski@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-3-stanislaw.gruszka@linux.intel.com
2023-10-31accel/ivpu/40xx: Allow to change profiling frequencyKrystian Pradzynski
Profiling freq is a debug firmware feature. It switches default clock to higher resolution for fine-grained and more accurate firmware task profiling. We already configure it during boot up of VPU4. Add debugfs knob and helpers per HW generation that allow to change it. For vpu37xx the implementation is empty as profiling frequency can only be changed on VPU4 or newer. Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028155936.1183342-2-stanislaw.gruszka@linux.intel.com
2023-10-30Merge tag 'hardening-v6.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening updates from Kees Cook: "One of the more voluminous set of changes is for adding the new __counted_by annotation[1] to gain run-time bounds checking of dynamically sized arrays with UBSan. - Add LKDTM test for stuck CPUs (Mark Rutland) - Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo) - Refactor more 1-element arrays into flexible arrays (Gustavo A. R. Silva) - Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem Shaikh) - Convert group_info.usage to refcount_t (Elena Reshetova) - Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva) - Add Kconfig fragment for basic hardening options (Kees Cook, Lukas Bulwahn) - Fix randstruct GCC plugin performance mode to stay in groups (Kees Cook) - Fix strtomem() compile-time check for small sources (Kees Cook)" * tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits) hwmon: (acpi_power_meter) replace open-coded kmemdup_nul reset: Annotate struct reset_control_array with __counted_by kexec: Annotate struct crash_mem with __counted_by virtio_console: Annotate struct port_buffer with __counted_by ima: Add __counted_by for struct modsig and use struct_size() MAINTAINERS: Include stackleak paths in hardening entry string: Adjust strtomem() logic to allow for smaller sources hardening: x86: drop reference to removed config AMD_IOMMU_V2 randstruct: Fix gcc-plugin performance mode to stay in group mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by irqchip/imx-intmux: Annotate struct intmux_data with __counted_by KVM: Annotate struct kvm_irq_routing_table with __counted_by virt: acrn: Annotate struct vm_memory_region_batch with __counted_by hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by sparc: Annotate struct cpuinfo_tree with __counted_by isdn: kcapi: replace deprecated strncpy with strscpy_pad isdn: replace deprecated strncpy with strscpy NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by ...
2023-10-31Merge tag 'drm-misc-next-2023-10-27' of ↵Dave Airlie
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v6.7-rc1: drm-misc-next-2023-10-19 + following: UAPI Changes: Cross-subsystem Changes: - Convert fbdev drivers to use fbdev i/o mem helpers. Core Changes: - Use cross-references for macros in docs. - Make drm_client_buffer_addb use addfb2. - Add NV20 and NV30 YUV formats. - Documentation updates for create_dumb ioctl. - CI fixes. - Allow variable number of run-queues in scheduler. Driver Changes: - Rename drm/ast constants. - Make ili9882t its own driver. - Assorted fixes in ivpu, vc4, bridge/synopsis, amdgpu. - Add planar formats to rockchip. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/3d92fae8-9b1b-4165-9ca8-5fda11ee146b@linux.intel.com
2023-10-30accel/ivpu: Add support for delayed D0i3 entry messageAndrzej Kacprowski
Currently the VPU firmware prepares for D0i3 every time the VPU is entering D0i2 Idle state. This is not optimal as we might not enter D0i3 every time we enter D0i2 Idle and this preparation is quite costly. This optimization moves D0i3 preparation to a dedicated message sent from the host driver only when the driver is about to enter D0i3 - this reduces power consumption and latency for certain workloads, for example audio workloads that submit inference every 10 ms. The VPU needs non zero time to enter IDLE state after responding to D0i3 entry message. If the driver does not wait for the VPU to enter IDLE state it could cause warm boot failures. Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-12-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu/37xx: Print warning when VPUIP is not idle during power downStanislaw Gruszka
Print warning if VPUIP is not idle during power down. Use warn log level also when we fail to enter reset state as this is not really an error but unexpected behavior. Reviewed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-11-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Introduce ivpu_ipc_send_receive_active()Karol Wachowski
Split ivpu_ipc_send_receive() implementation to have a version that does not call pm_runtime_resume_and_get(). That implementation can be invoked when device is up and runtime resume is prohibited (for example at the end of boot sequence). The new function will be used for D0i3 entry IPC message addition in the separate change. Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-10-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Pass D0i3 residency time to the VPU firmwareAndrzej Kacprowski
The firmware needs to know the time spent in D0i3/D3 to calculate telemetry data. The D0i3/D3 residency time is calculated by the driver and passed to the firmware in the boot parameters. The driver also passes VPU perf counter value captured right before entering D0i3 - this allows the VPU firmware to generate monotonic timestamps for the logs. Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-9-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu/40xx: Capture D0i3 entry host and device timestampsAndrzej Kacprowski
The driver needs to capture the D0i3 entry timestamp to calculate D0i3 residency time. The D0i3 residency time and the VPU timestamp are passed to the firmware at D0i3 exit (warm boot). Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-8-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Change test_mode module param to bitmaskKarol Wachowski
Change meaning of test_mode module parameter from integer value to bitmask allowing setting different test features with corresponding bits. Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-7-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Add support for VPU_JOB_FLAGS_NULL_SUBMISSION_MASKAndrzej Kacprowski
Add test_mode = 3 that add VPU_JOB_FLAGS_NULL_SUBMISSION_MASK flag to the job send to the VPU device. Then the VPU will process the job but won't execute commands (except the command to signal the fence). This can be used to estimate job processing overhead in the host software and VPU firmware. Unlike the null hardware mode, the null submission mode will still work even if UMD uses VPU fences to track job completion. Signed-off-by: Andrzej Kacprowski <andrzej.kacprowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-6-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Remove reset from power up sequenceKarol Wachowski
Setting a non-zero work point resets the IP hence IP_RESET trigger is redundant. Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-5-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Add dvfs_mode file to debugfsTomasz Rusinowicz
Add new debugfs file to set dvfs_mode FW boot parameter and restart the FW to allow experimenting with DVFS (dynamic voltage & frequency scaling). Signed-off-by: Tomasz Rusinowicz <tomasz.rusinowicz@intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-4-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Remove unneeded drm_driver declarationStanislaw Gruszka
Cleanup drm_driver declaration leftover. Reviewed-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-3-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: Update FW APIKrystian Pradzynski
Bump boot API to 4.20 Bump JSM API to 3.15 Signed-off-by: Krystian Pradzynski <krystian.pradzynski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231028133415.1169975-2-stanislaw.gruszka@linux.intel.com
2023-10-30accel/ivpu: avoid build failure with CONFIG_PM=nArnd Bergmann
The usage count of struct dev_pm_info is an implementation detail that is only available if CONFIG_PM is enabled, so printing it in a debug message causes a build failure in configurations without PM: In file included from include/linux/device.h:15, from include/linux/pci.h:37, from drivers/accel/ivpu/ivpu_pm.c:8: drivers/accel/ivpu/ivpu_pm.c: In function 'ivpu_rpm_get_if_active': drivers/accel/ivpu/ivpu_pm.c:254:51: error: 'struct dev_pm_info' has no member named 'usage_count' 254 | atomic_read(&vdev->drm.dev->power.usage_count)); | ^ include/linux/dev_printk.h:129:48: note: in definition of macro 'dev_printk' 129 | _dev_printk(level, dev, fmt, ##__VA_ARGS__); \ | ^~~~~~~~~~~ drivers/accel/ivpu/ivpu_drv.h:75:17: note: in expansion of macro 'dev_dbg' 75 | dev_dbg((vdev)->drm.dev, "[%s] " fmt, #type, ##args); \ | ^~~~~~~ drivers/accel/ivpu/ivpu_pm.c:253:9: note: in expansion of macro 'ivpu_dbg' 253 | ivpu_dbg(vdev, RPM, "rpm_get_if_active count %d\n", | ^~~~~~~~ The print message does not seem essential, so the easiest workaround is to just remove it. Fixes: c39dc15191c4 ("accel/ivpu: Read clock rate only if device is up") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231027152633.528490-1-arnd@kernel.org
2023-10-27accel/qaic: Support MHI QAIC_TIMESYNC channelPranjal Ramajor Asha Kanojiya
Use QAIC_TIMESYNC MHI channel to send UTC time to device in SBL environment. Remove support for QAIC_TIMESYNC MHI channel in AMSS environment as it is not used in that environment. Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231016170114.5446-3-quic_jhugo@quicinc.com
2023-10-27accel/qaic: Add support for periodic timesyncAjit Pal Singh
Device and Host have a time synchronization mechanism that happens once during boot when device is in SBL mode. After that, in mission-mode there is no timesync. In an experiment after continuous operation, device time drifted w.r.t. host by approximately 3 seconds per day. This drift leads to mismatch in timestamp of device and Host logs. To correct this implement periodic timesync in driver. This timesync is carried out via QAIC_TIMESYNC_PERIODIC MHI channel. Signed-off-by: Ajit Pal Singh <quic_ajitpals@quicinc.com> Signed-off-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231016170114.5446-2-quic_jhugo@quicinc.com
2023-10-27accel/qaic: Enable 1 MSI fallback modeCarl Vanderlip
Several virtualization use-cases either don't support 32 MultiMSIs (Xen/VMware) or have significant drawbacks to their use (KVM's vIOMMU, which is required to support 32 MSI, needs to allocate an alternate system memory space for each device using vIOMMU (e.g. 8GB VM mem and 2 cards => 8 + 2 * 8 = 24GB host memory required)). Support these cases by enabling a 1 MSI fallback mode. Whenever all 32 MSIs requested are not available, a second request for a single MSI is made. Its success is the initiator of single MSI mode. This mode causes all interrupts generated by the device to be directed to the 0th MSI (firmware >=v1.10 will do this as a response to the PCIe MSI capability configuration). Likewise, all interrupt handlers for the device are registered to the 0th MSI. Since the DBC interrupt handler checks if the DBC is in use or if there is any pending changes, the 'spurious' interrupts are disregarded. If there is work to be done, the standard threaded IRQ handler is dispatched. On every interrupt, the MHI handler wakes up its threaded interrupt handler, and attempts to wake any waiters for MHI state events. Performance is within +-0.6% for test cases that typify real world use. Larger differences ([-4,+132]%, avg +47%) exist for very simple tasks (e.g. addition) compiled for single NSPs. It is assumed that the small work and many interrupts typically cause contention (e.g. 16 NSPs vs 4 CPUs), as evidenced by the standard deviation between runs also decreasing (r=-0.48 between delta(Performace_test) and delta(StdDev_test/Avg_test)) Signed-off-by: Carl Vanderlip <quic_carlv@quicinc.com> Reviewed-by: Pranjal Ramajor Asha Kanojiya <quic_pkanojiy@quicinc.com> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231016170036.5409-1-quic_jhugo@quicinc.com
2023-10-26accel/ivpu/37xx: Fix missing VPUIP interruptsKarol Wachowski
Move sequence of masking and unmasking global interrupts from buttress interrupt handler to generic one that handles both VPUIP and BTRS interrupts. Unmasking global interrupts will re-trigger MSI for any pending interrupts. Lack of this sequence will cause the driver to miss any VPUIP interrupt that comes after reading VPU_37XX_HOST_SS_ICB_STATUS_0 and before clearing all active interrupt sources. Fixes: 35b137630f08 ("accel/ivpu: Introduce a new DRM driver for Intel VPU") Cc: stable@vger.kernel.org Signed-off-by: Karol Wachowski <karol.wachowski@linux.intel.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231024161952.759914-1-stanislaw.gruszka@linux.intel.com
2023-10-23BackMerge tag 'v6.6-rc7' into drm-nextDave Airlie
This is needed to add the msm pr which is based on a higher base. Signed-off-by: Dave Airlie <airlied@redhat.com>
2023-10-23accel/ivpu: Delete the TODO fileDeepak R Varma
The work items listed in the TODO file of this driver file are either completed or dropped. The file is no more significant according to the maintainers. Hence removing it from the sources. Suggested-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Deepak R Varma <drv@mailo.com> Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/ZTAucrOT69/tQK2o@runicha.com
2023-10-23accel/ivpu/37xx: Remove support for FPGA and simicsStanislaw Gruszka
We do not run 37xx VPU on non-silicon platforms any longer. Remove deprecated code to make it cleaner. Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-7-stanislaw.gruszka@linux.intel.com
2023-10-23accel/ivpu: Do not initialize parameters on power upStanislaw Gruszka
Initialize HW specific parameters only once. We do not have to do this on every power_up (performed during initialization and on resume). Move corresponding code to ->info_init() Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20231020104501.697763-6-stanislaw.gruszka@linux.intel.com
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-07-03 03:38:11 +0000