summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/gpmi-nand/gpmi-regs.h
blob: 53397cc290fcb522c921d746e768a649de663335 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
/*
 * Freescale GPMI NAND Flash Driver
 *
 * Copyright 2008-2011 Freescale Semiconductor, Inc.
 * Copyright 2008 Embedded Alley Solutions, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */
#ifndef __GPMI_NAND_GPMI_REGS_H
#define __GPMI_NAND_GPMI_REGS_H

#define HW_GPMI_CTRL0					0x00000000
#define HW_GPMI_CTRL0_SET				0x00000004
#define HW_GPMI_CTRL0_CLR				0x00000008
#define HW_GPMI_CTRL0_TOG				0x0000000c

#define BP_GPMI_CTRL0_COMMAND_MODE			24
#define BM_GPMI_CTRL0_COMMAND_MODE	(3 << BP_GPMI_CTRL0_COMMAND_MODE)
#define BF_GPMI_CTRL0_COMMAND_MODE(v)	\
	(((v) << BP_GPMI_CTRL0_COMMAND_MODE) & BM_GPMI_CTRL0_COMMAND_MODE)
#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE		0x0
#define BV_GPMI_CTRL0_COMMAND_MODE__READ		0x1
#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE	0x2
#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY	0x3

#define BM_GPMI_CTRL0_WORD_LENGTH			(1 << 23)
#define BV_GPMI_CTRL0_WORD_LENGTH__16_BIT		0x0
#define BV_GPMI_CTRL0_WORD_LENGTH__8_BIT		0x1

/*
 *  Difference in LOCK_CS between imx23 and imx28 :
 *  This bit may impact the _POWER_ consumption. So some chips
 *  do not set it.
 */
#define MX23_BP_GPMI_CTRL0_LOCK_CS			22
#define MX28_BP_GPMI_CTRL0_LOCK_CS			27
#define LOCK_CS_ENABLE					0x1
#define BF_GPMI_CTRL0_LOCK_CS(v, x)			0x0

/* Difference in CS between imx23 and imx28 */
#define BP_GPMI_CTRL0_CS				20
#define MX23_BM_GPMI_CTRL0_CS		(3 << BP_GPMI_CTRL0_CS)
#define MX28_BM_GPMI_CTRL0_CS		(7 << BP_GPMI_CTRL0_CS)
#define BF_GPMI_CTRL0_CS(v, x)		(((v) << BP_GPMI_CTRL0_CS) & \
						(GPMI_IS_MX23((x)) \
						? MX23_BM_GPMI_CTRL0_CS	\
						: MX28_BM_GPMI_CTRL0_CS))

#define BP_GPMI_CTRL0_ADDRESS				17
#define BM_GPMI_CTRL0_ADDRESS		(3 << BP_GPMI_CTRL0_ADDRESS)
#define BF_GPMI_CTRL0_ADDRESS(v)	\
		(((v) << BP_GPMI_CTRL0_ADDRESS) & BM_GPMI_CTRL0_ADDRESS)
#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA		0x0
#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE			0x1
#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE			0x2

#define BM_GPMI_CTRL0_ADDRESS_INCREMENT			(1 << 16)
#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__DISABLED	0x0
#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__ENABLED	0x1

#define BP_GPMI_CTRL0_XFER_COUNT			0
#define BM_GPMI_CTRL0_XFER_COUNT	(0xffff << BP_GPMI_CTRL0_XFER_COUNT)
#define BF_GPMI_CTRL0_XFER_COUNT(v)	\
		(((v) << BP_GPMI_CTRL0_XFER_COUNT) & BM_GPMI_CTRL0_XFER_COUNT)

#define HW_GPMI_COMPARE					0x00000010

#define HW_GPMI_ECCCTRL					0x00000020
#define HW_GPMI_ECCCTRL_SET				0x00000024
#define HW_GPMI_ECCCTRL_CLR				0x00000028
#define HW_GPMI_ECCCTRL_TOG				0x0000002c

#define BP_GPMI_ECCCTRL_ECC_CMD				13
#define BM_GPMI_ECCCTRL_ECC_CMD		(3 << BP_GPMI_ECCCTRL_ECC_CMD)
#define BF_GPMI_ECCCTRL_ECC_CMD(v)	\
		(((v) << BP_GPMI_ECCCTRL_ECC_CMD) & BM_GPMI_ECCCTRL_ECC_CMD)
#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE		0x0
#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE		0x1

#define BM_GPMI_ECCCTRL_ENABLE_ECC			(1 << 12)
#define BV_GPMI_ECCCTRL_ENABLE_ECC__ENABLE		0x1
#define BV_GPMI_ECCCTRL_ENABLE_ECC__DISABLE		0x0

#define BP_GPMI_ECCCTRL_BUFFER_MASK			0
#define BM_GPMI_ECCCTRL_BUFFER_MASK	(0x1ff << BP_GPMI_ECCCTRL_BUFFER_MASK)
#define BF_GPMI_ECCCTRL_BUFFER_MASK(v)	\
	(((v) << BP_GPMI_ECCCTRL_BUFFER_MASK) & BM_GPMI_ECCCTRL_BUFFER_MASK)
#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY	0x100
#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE		0x1FF

#define HW_GPMI_ECCCOUNT				0x00000030
#define HW_GPMI_PAYLOAD					0x00000040
#define HW_GPMI_AUXILIARY				0x00000050
#define HW_GPMI_CTRL1					0x00000060
#define HW_GPMI_CTRL1_SET				0x00000064
#define HW_GPMI_CTRL1_CLR				0x00000068
#define HW_GPMI_CTRL1_TOG				0x0000006c

#define BP_GPMI_CTRL1_WRN_DLY_SEL			22
#define BM_GPMI_CTRL1_WRN_DLY_SEL	(0x3 << BP_GPMI_CTRL1_WRN_DLY_SEL)
#define BF_GPMI_CTRL1_WRN_DLY_SEL(v)  \
	(((v) << BP_GPMI_CTRL1_WRN_DLY_SEL) & BM_GPMI_CTRL1_WRN_DLY_SEL)
#define BV_GPMI_CTRL1_WRN_DLY_SEL_4_TO_8NS		0x0
#define BV_GPMI_CTRL1_WRN_DLY_SEL_6_TO_10NS		0x1
#define BV_GPMI_CTRL1_WRN_DLY_SEL_7_TO_12NS		0x2
#define BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY		0x3

#define BM_GPMI_CTRL1_BCH_MODE				(1 << 18)

#define BP_GPMI_CTRL1_DLL_ENABLE			17
#define BM_GPMI_CTRL1_DLL_ENABLE	(1 << BP_GPMI_CTRL1_DLL_ENABLE)

#define BP_GPMI_CTRL1_HALF_PERIOD			16
#define BM_GPMI_CTRL1_HALF_PERIOD	(1 << BP_GPMI_CTRL1_HALF_PERIOD)

#define BP_GPMI_CTRL1_RDN_DELAY				12
#define BM_GPMI_CTRL1_RDN_DELAY		(0xf << BP_GPMI_CTRL1_RDN_DELAY)
#define BF_GPMI_CTRL1_RDN_DELAY(v)	\
		(((v) << BP_GPMI_CTRL1_RDN_DELAY) & BM_GPMI_CTRL1_RDN_DELAY)

#define BM_GPMI_CTRL1_DEV_RESET				(1 << 3)
#define BV_GPMI_CTRL1_DEV_RESET__ENABLED		0x0
#define BV_GPMI_CTRL1_DEV_RESET__DISABLED		0x1

#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY		(1 << 2)
#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVELOW	0x0
#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVEHIGH	0x1

#define BM_GPMI_CTRL1_CAMERA_MODE			(1 << 1)
#define BV_GPMI_CTRL1_GPMI_MODE__NAND			0x0
#define BV_GPMI_CTRL1_GPMI_MODE__ATA			0x1

#define BM_GPMI_CTRL1_GPMI_MODE				(1 << 0)

#define HW_GPMI_TIMING0					0x00000070

#define BP_GPMI_TIMING0_ADDRESS_SETUP			16
#define BM_GPMI_TIMING0_ADDRESS_SETUP	(0xff << BP_GPMI_TIMING0_ADDRESS_SETUP)
#define BF_GPMI_TIMING0_ADDRESS_SETUP(v)	\
	(((v) << BP_GPMI_TIMING0_ADDRESS_SETUP) & BM_GPMI_TIMING0_ADDRESS_SETUP)

#define BP_GPMI_TIMING0_DATA_HOLD			8
#define BM_GPMI_TIMING0_DATA_HOLD	(0xff << BP_GPMI_TIMING0_DATA_HOLD)
#define BF_GPMI_TIMING0_DATA_HOLD(v)		\
	(((v) << BP_GPMI_TIMING0_DATA_HOLD) & BM_GPMI_TIMING0_DATA_HOLD)

#define BP_GPMI_TIMING0_DATA_SETUP			0
#define BM_GPMI_TIMING0_DATA_SETUP	(0xff << BP_GPMI_TIMING0_DATA_SETUP)
#define BF_GPMI_TIMING0_DATA_SETUP(v)		\
	(((v) << BP_GPMI_TIMING0_DATA_SETUP) & BM_GPMI_TIMING0_DATA_SETUP)

#define HW_GPMI_TIMING1					0x00000080
#define BP_GPMI_TIMING1_BUSY_TIMEOUT			16
#define BM_GPMI_TIMING1_BUSY_TIMEOUT	(0xffff << BP_GPMI_TIMING1_BUSY_TIMEOUT)
#define BF_GPMI_TIMING1_BUSY_TIMEOUT(v)		\
	(((v) << BP_GPMI_TIMING1_BUSY_TIMEOUT) & BM_GPMI_TIMING1_BUSY_TIMEOUT)

#define HW_GPMI_TIMING2					0x00000090
#define HW_GPMI_DATA					0x000000a0

/* MX28 uses this to detect READY. */
#define HW_GPMI_STAT					0x000000b0
#define MX28_BP_GPMI_STAT_READY_BUSY			24
#define MX28_BM_GPMI_STAT_READY_BUSY	(0xff << MX28_BP_GPMI_STAT_READY_BUSY)
#define MX28_BF_GPMI_STAT_READY_BUSY(v)		\
	(((v) << MX28_BP_GPMI_STAT_READY_BUSY) & MX28_BM_GPMI_STAT_READY_BUSY)

/* MX23 uses this to detect READY. */
#define HW_GPMI_DEBUG					0x000000c0
#define MX23_BP_GPMI_DEBUG_READY0			28
#define MX23_BM_GPMI_DEBUG_READY0	(1 << MX23_BP_GPMI_DEBUG_READY0)
#endif