blob: 92e950d6e996f2bfcfae08257ab5b50b22fb650a (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
|
/*
* Copyright 2008-2009 Analog Devices Inc.
*
* Licensed under the ADI BSD license or the GPL-2 (or later)
*/
#ifndef _DEF_BF514_H
#define _DEF_BF514_H
/* BF514 is BF512 + RSI */
#include "defBF512.h"
/* Removable Storage Interface Registers */
#define RSI_PWR_CONTROL 0xFFC03800 /* RSI Power Control Register */
#define RSI_CLK_CONTROL 0xFFC03804 /* RSI Clock Control Register */
#define RSI_ARGUMENT 0xFFC03808 /* RSI Argument Register */
#define RSI_COMMAND 0xFFC0380C /* RSI Command Register */
#define RSI_RESP_CMD 0xFFC03810 /* RSI Response Command Register */
#define RSI_RESPONSE0 0xFFC03814 /* RSI Response Register */
#define RSI_RESPONSE1 0xFFC03818 /* RSI Response Register */
#define RSI_RESPONSE2 0xFFC0381C /* RSI Response Register */
#define RSI_RESPONSE3 0xFFC03820 /* RSI Response Register */
#define RSI_DATA_TIMER 0xFFC03824 /* RSI Data Timer Register */
#define RSI_DATA_LGTH 0xFFC03828 /* RSI Data Length Register */
#define RSI_DATA_CONTROL 0xFFC0382C /* RSI Data Control Register */
#define RSI_DATA_CNT 0xFFC03830 /* RSI Data Counter Register */
#define RSI_STATUS 0xFFC03834 /* RSI Status Register */
#define RSI_STATUSCL 0xFFC03838 /* RSI Status Clear Register */
#define RSI_MASK0 0xFFC0383C /* RSI Interrupt 0 Mask Register */
#define RSI_MASK1 0xFFC03840 /* RSI Interrupt 1 Mask Register */
#define RSI_FIFO_CNT 0xFFC03848 /* RSI FIFO Counter Register */
#define RSI_CEATA_CONTROL 0xFFC0384C /* RSI CEATA Register */
#define RSI_FIFO 0xFFC03880 /* RSI Data FIFO Register */
#define RSI_ESTAT 0xFFC038C0 /* RSI Exception Status Register */
#define RSI_EMASK 0xFFC038C4 /* RSI Exception Mask Register */
#define RSI_CONFIG 0xFFC038C8 /* RSI Configuration Register */
#define RSI_RD_WAIT_EN 0xFFC038CC /* RSI Read Wait Enable Register */
#define RSI_PID0 0xFFC03FE0 /* RSI Peripheral ID Register 0 */
#define RSI_PID1 0xFFC03FE4 /* RSI Peripheral ID Register 1 */
#define RSI_PID2 0xFFC03FE8 /* RSI Peripheral ID Register 2 */
#define RSI_PID3 0xFFC03FEC /* RSI Peripheral ID Register 3 */
#define RSI_PID4 0xFFC03FF0 /* RSI Peripheral ID Register 4 */
#define RSI_PID5 0xFFC03FF4 /* RSI Peripheral ID Register 5 */
#define RSI_PID6 0xFFC03FF8 /* RSI Peripheral ID Register 6 */
#define RSI_PID7 0xFFC03FFC /* RSI Peripheral ID Register 7 */
/* ********************************************************** */
/* SINGLE BIT MACRO PAIRS (bit mask and negated one) */
/* and MULTI BIT READ MACROS */
/* ********************************************************** */
/* Bit masks for SDH_COMMAND */
#define CMD_IDX 0x3f /* Command Index */
#define CMD_RSP 0x40 /* Response */
#define CMD_L_RSP 0x80 /* Long Response */
#define CMD_INT_E 0x100 /* Command Interrupt */
#define CMD_PEND_E 0x200 /* Command Pending */
#define CMD_E 0x400 /* Command Enable */
/* Bit masks for SDH_PWR_CTL */
#define PWR_ON 0x3 /* Power On */
#if 0
#define TBD 0x3c /* TBD */
#endif
#define SD_CMD_OD 0x40 /* Open Drain Output */
#define ROD_CTL 0x80 /* Rod Control */
/* Bit masks for SDH_CLK_CTL */
#define CLKDIV 0xff /* MC_CLK Divisor */
#define CLK_E 0x100 /* MC_CLK Bus Clock Enable */
#define PWR_SV_E 0x200 /* Power Save Enable */
#define CLKDIV_BYPASS 0x400 /* Bypass Divisor */
#define WIDE_BUS 0x800 /* Wide Bus Mode Enable */
/* Bit masks for SDH_RESP_CMD */
#define RESP_CMD 0x3f /* Response Command */
/* Bit masks for SDH_DATA_CTL */
#define DTX_E 0x1 /* Data Transfer Enable */
#define DTX_DIR 0x2 /* Data Transfer Direction */
#define DTX_MODE 0x4 /* Data Transfer Mode */
#define DTX_DMA_E 0x8 /* Data Transfer DMA Enable */
#define DTX_BLK_LGTH 0xf0 /* Data Transfer Block Length */
/* Bit masks for SDH_STATUS */
#define CMD_CRC_FAIL 0x1 /* CMD CRC Fail */
#define DAT_CRC_FAIL 0x2 /* Data CRC Fail */
#define CMD_TIME_OUT 0x4 /* CMD Time Out */
#define DAT_TIME_OUT 0x8 /* Data Time Out */
#define TX_UNDERRUN 0x10 /* Transmit Underrun */
#define RX_OVERRUN 0x20 /* Receive Overrun */
#define CMD_RESP_END 0x40 /* CMD Response End */
#define CMD_SENT 0x80 /* CMD Sent */
#define DAT_END 0x100 /* Data End */
#define START_BIT_ERR 0x200 /* Start Bit Error */
#define DAT_BLK_END 0x400 /* Data Block End */
#define CMD_ACT 0x800 /* CMD Active */
#define TX_ACT 0x1000 /* Transmit Active */
#define RX_ACT 0x2000 /* Receive Active */
#define TX_FIFO_STAT 0x4000 /* Transmit FIFO Status */
#define RX_FIFO_STAT 0x8000 /* Receive FIFO Status */
#define TX_FIFO_FULL 0x10000 /* Transmit FIFO Full */
#define RX_FIFO_FULL 0x20000 /* Receive FIFO Full */
#define TX_FIFO_ZERO 0x40000 /* Transmit FIFO Empty */
#define RX_DAT_ZERO 0x80000 /* Receive FIFO Empty */
#define TX_DAT_RDY 0x100000 /* Transmit Data Available */
#define RX_FIFO_RDY 0x200000 /* Receive Data Available */
/* Bit masks for SDH_STATUS_CLR */
#define CMD_CRC_FAIL_STAT 0x1 /* CMD CRC Fail Status */
#define DAT_CRC_FAIL_STAT 0x2 /* Data CRC Fail Status */
#define CMD_TIMEOUT_STAT 0x4 /* CMD Time Out Status */
#define DAT_TIMEOUT_STAT 0x8 /* Data Time Out status */
#define TX_UNDERRUN_STAT 0x10 /* Transmit Underrun Status */
#define RX_OVERRUN_STAT 0x20 /* Receive Overrun Status */
#define CMD_RESP_END_STAT 0x40 /* CMD Response End Status */
#define CMD_SENT_STAT 0x80 /* CMD Sent Status */
#define DAT_END_STAT 0x100 /* Data End Status */
#define START_BIT_ERR_STAT 0x200 /* Start Bit Error Status */
#define DAT_BLK_END_STAT 0x400 /* Data Block End Status */
/* Bit masks for SDH_MASK0 */
#define CMD_CRC_FAIL_MASK 0x1 /* CMD CRC Fail Mask */
#define DAT_CRC_FAIL_MASK 0x2 /* Data CRC Fail Mask */
#define CMD_TIMEOUT_MASK 0x4 /* CMD Time Out Mask */
#define DAT_TIMEOUT_MASK 0x8 /* Data Time Out Mask */
#define TX_UNDERRUN_MASK 0x10 /* Transmit Underrun Mask */
#define RX_OVERRUN_MASK 0x20 /* Receive Overrun Mask */
#define CMD_RESP_END_MASK 0x40 /* CMD Response End Mask */
#define CMD_SENT_MASK 0x80 /* CMD Sent Mask */
#define DAT_END_MASK 0x100 /* Data End Mask */
#define START_BIT_ERR_MASK 0x200 /* Start Bit Error Mask */
#define DAT_BLK_END_MASK 0x400 /* Data Block End Mask */
#define CMD_ACT_MASK 0x800 /* CMD Active Mask */
#define TX_ACT_MASK 0x1000 /* Transmit Active Mask */
#define RX_ACT_MASK 0x2000 /* Receive Active Mask */
#define TX_FIFO_STAT_MASK 0x4000 /* Transmit FIFO Status Mask */
#define RX_FIFO_STAT_MASK 0x8000 /* Receive FIFO Status Mask */
#define TX_FIFO_FULL_MASK 0x10000 /* Transmit FIFO Full Mask */
#define RX_FIFO_FULL_MASK 0x20000 /* Receive FIFO Full Mask */
#define TX_FIFO_ZERO_MASK 0x40000 /* Transmit FIFO Empty Mask */
#define RX_DAT_ZERO_MASK 0x80000 /* Receive FIFO Empty Mask */
#define TX_DAT_RDY_MASK 0x100000 /* Transmit Data Available Mask */
#define RX_FIFO_RDY_MASK 0x200000 /* Receive Data Available Mask */
/* Bit masks for SDH_FIFO_CNT */
#define FIFO_COUNT 0x7fff /* FIFO Count */
/* Bit masks for SDH_E_STATUS */
#define SDIO_INT_DET 0x2 /* SDIO Int Detected */
#define SD_CARD_DET 0x10 /* SD Card Detect */
/* Bit masks for SDH_E_MASK */
#define SDIO_MSK 0x2 /* Mask SDIO Int Detected */
#define SCD_MSK 0x40 /* Mask Card Detect */
/* Bit masks for SDH_CFG */
#define CLKS_EN 0x1 /* Clocks Enable */
#define SD4E 0x4 /* SDIO 4-Bit Enable */
#define MWE 0x8 /* Moving Window Enable */
#define SD_RST 0x10 /* SDMMC Reset */
#define PUP_SDDAT 0x20 /* Pull-up SD_DAT */
#define PUP_SDDAT3 0x40 /* Pull-up SD_DAT3 */
#define PD_SDDAT3 0x80 /* Pull-down SD_DAT3 */
/* Bit masks for SDH_RD_WAIT_EN */
#define RWR 0x1 /* Read Wait Request */
#endif /* _DEF_BF514_H */
|
