summaryrefslogtreecommitdiffstats
path: root/tools/power
AgeCommit message (Collapse)Author
2013-07-05cpupower: Add Haswell family 0x45 specific idle monitor to show PC8,9,10 statesThomas Renninger
This specific processor supports 3 new package sleep states. Provide a monitor, so that the user can see their usage. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-05cpupower: Haswell also supports the C-states introduced with SandyBridgeThomas Renninger
Add Haswell model numbers to snb_register() as it also supports the C-states introduced in SandyBridge processors. [rjw: Changelog] Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-05cpupower: Introduce idle-set subcommand and C-state enabling/disablingThomas Renninger
Example: cpupower idle-set -d 3 will disable C-state 3 on all processors (set commands are active on all CPUs by default), same as: cpupower -c all idle-set -d 3 Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-05cpupower: Implement disabling of cstate interfaceThomas Renninger
Latest kernel allows to disable C-states via: /sys/devices/system/cpu/cpuX/cpuidle/stateY/disable This patch provides lower level sysfs access functions to make use of this interface. A later patch will implement the higher level stuff. Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-05cpupower: Make idlestate usage unsignedThomas Renninger
Use unsigned int as the data type for some variables related to CPU idle states which allows the code to be simplified slightly. [rjw: Changelog] Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-13turbostat: Increase output buffer size to accommodate C8-C10Josh Triplett
On platforms with C8-C10 support, the additional C-states cause turbostat to overrun its output buffer of 128 bytes per CPU. Increase this to 256 bytes per CPU. [ As a bugfix, this should go into 3.10; however, since the C8-C10 support didn't go in until after 3.9, this need not go into any stable kernel. ] Signed-off-by: Josh Triplett <josh@joshtriplett.org> Cc: Len Brown <len.brown@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-05-11Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull idle update from Len Brown: "Add support for new Haswell-ULT CPU idle power states" * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: intel_idle: initial C8, C9, C10 support tools/power turbostat: display C8, C9, C10 residency
2013-04-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree updates from Jiri Kosina: "Usual stuff, mostly comment fixes, typo fixes, printk fixes and small code cleanups" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (45 commits) mm: Convert print_symbol to %pSR gfs2: Convert print_symbol to %pSR m32r: Convert print_symbol to %pSR iostats.txt: add easy-to-find description for field 6 x86 cmpxchg.h: fix wrong comment treewide: Fix typo in printk and comments doc: devicetree: Fix various typos docbook: fix 8250 naming in device-drivers pata_pdc2027x: Fix compiler warning treewide: Fix typo in printks mei: Fix comments in drivers/misc/mei treewide: Fix typos in kernel messages pm44xx: Fix comment for "CONFIG_CPU_IDLE" doc: Fix typo "CONFIG_CGROUP_CGROUP_MEMCG_SWAP" mmzone: correct "pags" to "pages" in comment. kernel-parameters: remove outdated 'noresidual' parameter Remove spurious _H suffixes from ifdef comments sound: Remove stray pluses from Kconfig file radio-shark: Fix printk "CONFIG_LED_CLASS" doc: put proper reference to CONFIG_MODULE_SIG_ENFORCE ...
2013-04-17tools/power turbostat: display C8, C9, C10 residencyKristen Carlson Accardi
Display residency in the new C-states, C8, C9, C10. C8, C9, C10 are present on some: "Fourth Generation Intel(R) Core(TM) Processors", which are based on Intel(R) microarchitecture code name Haswell. Signed-off-by: Kristen Carlson Accardi <kristen@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2013-03-31treewide: Fix typos in kernel messagesMasanari Iida
Correct spelling typos in various part of printk. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-03-15tools/power turbostat: additional Haswell CPU-idLen Brown
There is an additional HSW CPU-id, 0x46, which has C-states exactly like CPU-id 0x45. Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-18Merge branch 'release' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (35 commits) PM idle: remove global declaration of pm_idle unicore32 idle: delete stray pm_idle comment openrisc idle: delete pm_idle mn10300 idle: delete pm_idle microblaze idle: delete pm_idle m32r idle: delete pm_idle, and other dead idle code ia64 idle: delete pm_idle cris idle: delete idle and pm_idle ARM64 idle: delete pm_idle ARM idle: delete pm_idle blackfin idle: delete pm_idle sparc idle: rename pm_idle to sparc_idle sh idle: rename global pm_idle to static sh_idle x86 idle: rename global pm_idle to static x86_idle APM idle: register apm_cpu_idle via cpuidle tools/power turbostat: display SMI count by default intel_idle: export both C1 and C1E cpuidle: remove vestage definition of cpuidle_state_usage.driver_data x86 idle: remove 32-bit-only "no-hlt" parameter, hlt_works_ok flag x86 idle: remove mwait_idle() and "idle=mwait" cmdline param ... Conflicts: arch/x86/kernel/process.c (with PM / tracing commit 43720bd) drivers/acpi/processor_idle.c (with ACPICA commit 4f84291)
2013-02-13tools/power turbostat: display SMI count by defaultLen Brown
The SMI counter is popular -- so display it by default rather than requiring an option. What the heck, we've blown the 80 column budget on many systems already... Note that the value displayed is the delta during the measurement interval. The absolute value of the counter can still be seen with the generic 32-bit MSR option, ie. -m 0x34 Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-08tools/power turbostat: decode MSR_IA32_POWER_CTLLen Brown
When verbose is enabled, print the C1E-Enable bit in MSR_IA32_POWER_CTL. also delete some redundant tests on the verbose variable. Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-08tools/power turbostat: support HaswellLen Brown
This patch enables turbostat to run properly on the next-generation Intel(R) Microarchitecture, code named "Haswell" (HSW). HSW supports the BCLK and counters found in SNB. Signed-off-by: Len Brown <len.brown@intel.com>
2013-02-05ACPI tools / acpidump: must be run as root - install it into /usr/sbinThomas Renninger
Change the default location to install acpidump into from /usr/bin to /usr/sbin, as this tool needs to be run as root. [rjw: Subject and changelog] Signed-off-by: Thomas Renninger <trenn@suse.de> Tested-by: Lee, Chun-Yi <jlee@suse.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-12-18Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull powertool update from Len Brown: "This updates the tree w/ the latest version of turbostat, which reports temperature and - on SNB and later - Watts." Fix up semantic merge conflict as per Len. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: tools: Allow tools to be installed in a user specified location tools/power: turbostat: make Makefile a bit more capable tools/power x86_energy_perf_policy: close /proc/stat in for_every_cpu() tools/power turbostat: v3.0: monitor Watts and Temperature tools/power turbostat: fix output buffering issue tools/power turbostat: prevent infinite loop on migration error path x86 power: define RAPL MSRs tools/power/x86/turbostat: share kernel MSR #defines
2012-11-30tools: Allow tools to be installed in a user specified locationJosh Boyer
When building x86_energy_perf_policy or turbostat within the confines of a packaging system such as RPM, we need to be able to have it install to the buildroot and not the root filesystem of the build machine. This adds a DESTDIR variable that when set will act as a prefix for the install location of these tools. Signed-off-by: Josh Boyer <jwboyer@redhat.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-11-30tools/power: turbostat: make Makefile a bit more capableMark Asselstine
The turbostat Makefile is pretty simple, its output is placed in the same directory as the source, the install rule has no concept of a prefix or sysroot, and you can set CC to use a specific compiler but not use the more familiar CROSS_COMPILE. By making a few minor changes these limitations are removed while leaving the default behavior matching what it used to be. Example build with these changes: make CROSS_COMPILE=i686-wrs-linux-gnu- DESTDIR=/tmp install or from the tools directory make CROSS_COMPILE=i686-wrs-linux-gnu- DESTDIR=/tmp turbostat_install Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-11-30tools/power x86_energy_perf_policy: close /proc/stat in for_every_cpu()Colin Ian King
Instead of returning out of for_every_cpu() we should break out of the loop= which will then tidy up correctly by closing the file /proc/stat. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-11-30tools/power turbostat: v3.0: monitor Watts and TemperatureLen Brown
Show power in Watts and temperature in Celsius when hardware support is present. Intel's Sandy Bridge and Ivy Bridge processor generations support RAPL (Run-Time-Average-Power-Limiting). Per the Intel SDM (Intel® 64 and IA-32 Architectures Software Developer Manual) RAPL provides hardware energy counters and power control MSRs (Model Specific Registers). RAPL MSRs are designed primarily as a method to implement power capping. However, they are useful for monitoring system power whether or not power capping is used. In addition, Turbostat now shows temperature from DTS (Digital Thermal Sensor) and PTM (Package Thermal Monitor) hardware, if present. As before, turbostat reads MSRs, and never writes MSRs. New columns are present in turbostat output: The Pkg_W column shows Watts for each package (socket) in the system. On multi-socket systems, the system summary on the 1st row shows the sum for all sockets together. The Cor_W column shows Watts due to processors cores. Note that Core_W is included in Pkg_W. The optional GFX_W column shows Watts due to the graphics "un-core". Note that GFX_W is included in Pkg_W. The optional RAM_W column on server processors shows Watts due to DRAM DIMMS. As DRAM DIMMs are outside the processor package, RAM_W is not included in Pkg_W. The optional PKG_% and RAM_% columns on server processors shows the % of time in the measurement interval that RAPL power limiting is in effect on the package and on DRAM. Note that the RAPL energy counters have some limitations. First, hardware updates the counters about once every milli-second. This is fine for typical turbostat measurement intervals > 1 sec. However, when turbostat is used to measure events that approach 1ms, the counters are less useful. Second, the 32-bit energy counters are subject to wrapping. For example, a counter incrementing 15 micro-Joule units on a 130 Watt TDP server processor could (in theory) roll over in about 9 minutes. Turbostat detects and handles up to 1 counter overflow per measurement interval. But when the measurement interval exceeds the guaranteed counter range, we can't detect if more than 1 overflow occured. So in this case turbostat indicates that the results are in question by replacing the fractional part of the Watts in the output with "**": Pkg_W Cor_W GFX_W 3** 0** 0** Third, the RAPL counters are energy (Joule) counters -- they sum up weighted events in the package to estimate energy consumed. They are not analong power (Watt) meters. In practice, they tend to under-count because they don't cover every possible use of energy in the package. The accuracy of the RAPL counters will vary between product generations, and between SKU's in the same product generation, and with temperature. turbostat's -v (verbose) option now displays more power and thermal configuration information -- as shown on the turbostat.8 manual page. For example, it now displays the Package and DRAM Thermal Design Power (TDP): cpu0: MSR_PKG_POWER_INFO: 0x2f064001980410 (130 W TDP, RAPL 51 - 200 W, 0.045898 sec.) cpu0: MSR_DRAM_POWER_INFO,: 0x28025800780118 (35 W TDP, RAPL 15 - 75 W, 0.039062 sec.) cpu8: MSR_PKG_POWER_INFO: 0x2f064001980410 (130 W TDP, RAPL 51 - 200 W, 0.045898 sec.) cpu8: MSR_DRAM_POWER_INFO,: 0x28025800780118 (35 W TDP, RAPL 15 - 75 W, 0.039062 sec.) Signed-off-by: Len Brown <len.brown@intel.com>
2012-11-30tools/power turbostat: fix output buffering issueLen Brown
In periodic mode, turbostat writes to stdout, but users were un-able to re-direct stdout, eg. turbostat > outputfile would result in an empty outputfile. Signed-off-by: Len Brown <len.brown@intel.com>
2012-11-27cpupower: IvyBridge (0x3a and 0x3e models) supportThomas Renninger
Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27cpupower: Provide -c param for cpupower monitor to schedule process on all coresThomas Renninger
If an MSR based monitor is run in parallel this is not needed. This is the default case on all/most Intel machines. But when only sysfs info is read via cpupower monitor -m Idle_Stats (typically the case for non root users) or when other monitors are PCI based (AMD), Idle_Stats, read from sysfs can be totally bogus: cpupower monitor -m Idle_Stats PKG |CORE|CPU | POLL | C1-N | C3-N | C6-N 0| 0| 0| 0.00| 0.00| 0.24| 99.81 0| 0| 32| 0.00| 0.00| 0.00| 100.7 ... 0| 17| 20| 0.00| 0.00| 0.00| 173.1 0| 17| 52| 0.00| 0.00| 0.07| 173.0 0| 18| 68| 0.00| 0.00| 0.00| 0.00 0| 18| 76| 0.00| 0.00| 0.00| 0.00 ... With the -c option all cores are woken up and the kernel did update cpuidle statistics before reading out sysfs. This causes some overhead. Therefore avoid if possible, use if needed: cpupower monitor -c -m Idle_Stats PKG |CORE|CPU | POLL | C1-N | C3-N | C6-N 0| 0| 0| 0.00| 0.00| 0.00| 100.2 0| 0| 32| 0.00| 0.00| 0.00| 100.2 ... 0| 8| 8| 0.00| 0.00| 0.00| 99.82 0| 8| 40| 0.00| 0.00| 0.00| 99.81 0| 9| 24| 0.00| 0.00| 0.00| 100.3 0| 9| 56| 0.00| 0.00| 0.00| 100.2 0| 16| 4| 0.00| 0.00| 0.00| 99.75 0| 16| 36| 0.00| 0.00| 0.00| 99.38 ... Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27cpupower tools: Fix warning and a bug with the cpu package countPalmer Cox
The pkgs member of cpupower_topology is being used as the number of cpu packages. As the comment in get_cpu_topology notes, the package ids are not guaranteed to be contiguous. So, simply setting pkgs to the value of the highest physical_package_id doesn't actually provide a count of the number of cpu packages. Instead, calculate pkgs by setting it to the number of distinct physical_packge_id values which is pretty easy to do after the core_info structs are sorted. Calculating pkgs this way also has the nice benefit of getting rid of a sign comparison warning that GCC 4.6 was reporting. Signed-off-by: Palmer Cox <p@lmercox.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27cpupower tools: Fix malloc of cpu_info structurePalmer Cox
The cpu_info member of cpupower_topology was being declared as an unnamed structure. This member was then being malloced using the size of the parent cpupower_topology * the number of cpus. This works because cpu_info is smaller than cpupower_topology. However, there is no guarantee that will always be the case. Making cpu_info its own top level structure (named cpuid_core_info) allows for mallocing the actual size of this structure. This also lets us get rid of a redefinition of the structure in topology.c with slightly different field names. Signed-off-by: Palmer Cox <p@lmercox.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27cpupower tools: Fix issues with sysfs_topology_read_filePalmer Cox
Fix a variety of issues with sysfs_topology_read_file: * The return value of sysfs_topology_read_file function was not properly being checked for failure. * The function was reading int valued sysfs variables and then returning their value. So, even if a function was trying to check the return value of this function, a caller would not be able to tell an failure code apart from reading a negative value. This also conflicted with the comment on the function which said that a return value of 0 indicated success. * The function was parsing int valued sysfs values with strtoul instead of strtol. * The function was non-static even though it was only used in the file it was declared in. Signed-off-by: Palmer Cox <p@lmercox.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27cpupower tools: Fix minor warningsPalmer Cox
Fix minor warnings reported with GCC 4.6: * The sysfs_write_file function is unused - remove it. * The pr_mon_len in the print_header function is unsed - remove it. Signed-off-by: Palmer Cox <p@lmercox.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27cpupower tools: Update .gitignore for files created in the debug directoriesPalmer Cox
The files generated by the Makefiles in the debug directories aren't listed in the .gitignore file in the root of the cpupower tool which causes these files to show up in the output of 'git status'. Signed-off-by: Palmer Cox <p@lmercox.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27cpupower tools: Remove brace expansion from clean targetPalmer Cox
The clean targets from the cpupower tools' Makefiles use brace expansion to remove some generated files. However, the default shells on many systems do not support this feature resulting in some generated files not being removed by clean. Signed-off-by: Palmer Cox <p@lmercox.com> Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-27tools/power turbostat: prevent infinite loop on migration error pathLen Brown
Turbostat assumed if it can't migrate to a CPU, then the CPU must have gone off-line and turbostat should re-initialize with the new topology. But if turbostat can not migrate because it is restricted by a cpuset, then it will fail to migrate even after re-initialization, resulting in an infinite loop. Spit out a warning when we can't migrate and endure only 2 re-initialize cycles in a row before giving up and exiting. Signed-off-by: Len Brown <len.brown@intel.com>
2012-11-23tools/power/x86/turbostat: share kernel MSR #definesLen Brown
Now that turbostat is built in the kernel tree, it can share MSR #defines with the kernel. Signed-off-by: Len Brown <len.brown@intel.com> Cc: x86@kernel.org
2012-11-01tools/power turbostat: graceful fail on garbage inputLen Brown
When invald MSR's are specified on the command line, turbostat should simply print an error and exit. Signed-off-by: Len Brown <len.brown@intel.com>
2012-11-01tools/power turbostat: Repair Segmentation fault when using -i optionLen Brown
Fix regression caused by commit 8e180f3cb6b7510a3bdf14e16ce87c9f5d86f102 (tools/power turbostat: add [-d MSR#][-D MSR#] options to print counter deltas) Signed-off-by: Len Brown <len.brown@intel.com>
2012-10-09tools/power/acpi/acpidump: remove duplicated include from acpidump.cWei Yongjun
Remove duplicated include. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Len Brown <len.brown@intel.com>
2012-10-08Merge branch 'rc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild fixes from Michal Marek: "Here are two fixes I intended to send after v3.6-rc7, but failed to do so. So please pull them for v3.7-rc1 and they will be picked up by stable. The first one fixes gcc -x <language> syntax in various build-time tests, which icecream and possible other gcc wrappers did not understand (and yes, icecream is going to be fixed as well). The second one fixes make tar-pkg so that unpacking the tarball does not replace the /lib -> /usr/lib symlink on recent Fedora releases." * 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: Fix gcc -x syntax kbuild: Do not package /boot and /lib in make tar-pkg
2012-10-06Merge branches 'acpica', 'acpidump', 'intel-idle', 'misc', ↵Len Brown
'module_acpi_driver-simplify', 'turbostat' and 'usb3' into release add acpidump utility intel_idle driver now supports IVB Xeon turbostat can now count SMIs ACPI can now bind to USB3 hubs misc fixes
2012-10-06tools/power/turbostat: add option to count SMIs, re-name some optionsLen Brown
Counting SMIs is popular, so add a dedicated "-s" option to do it, and juggle some of the other option letters. -S is now system summary (was -s) -c is 32 bit counter (was -d) -C is 64-bit counter (was -D) -p is 1st thread in core (was -c) -P is 1st thread in package (was -p) bump the minor version number Signed-off-by: Len Brown <len.brown@intel.com>
2012-10-03kbuild: Fix gcc -x syntaxJean Delvare
The correct syntax for gcc -x is "gcc -x assembler", not "gcc -xassembler". Even though the latter happens to work, the former is what is documented in the manual page and thus what gcc wrappers such as icecream do expect. This isn't a cosmetic change. The missing space prevents icecream from recognizing compilation tasks it can't handle, leading to silent kernel miscompilations. Besides me, credits go to Michael Matz and Dirk Mueller for investigating the miscompilation issue and tracking it down to this incorrect -x parameter syntax. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Cc: Bernhard Walle <bernhard@bwalle.de> Cc: Michal Marek <mmarek@suse.cz> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Michal Marek <mmarek@suse.cz>
2012-09-27tools/power turbostat: add [-d MSR#][-D MSR#] options to print counter deltasLen Brown
# turbostat -d 0x34 is useful for printing the number of SMI's within an interval on Nehalem and newer processors. where # turbostat -m 0x34 will simply print out the total SMI count since reset. Suggested-by: Andi Kleen Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-26tools/power turbostat: add [-m MSR#] optionLen Brown
-m MSR# prints the specified MSR in 32-bit format -M MSR# prints the specified MSR in 64-bit format Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-26tools/power turbostat: make -M output prettyLen Brown
The -M option dumps the specified 64-bit MSR with every sample. Previously it was output at the end of each line. However, with the v2 style of printing, the lines are now staggered, making MSR output hard to read. So move the MSR output column to the left where things are aligned. Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-26tools/power turbostat: print more turbo-limit informationLen Brown
The "turbo-limit" is the maximum opportunistic processor speed, assuming no electrical or thermal constraints. For a given processor, the turbo-limit varies, depending on the number of active cores. Generally, there is more opportunity when fewer cores are active. Under the "-v" verbose option, turbostat would print the turbo-limits for the four cases of 1 to 4 cores active. Expand that capability to cover the cases of turbo opportunities with up to 16 cores active. Note that not all hardware platforms supply this information, and that sometimes a valid limit may be specified for a core which is not actually present. Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-26tools/power turbostat: delete unused lineLen Brown
MSR_TSC is no longer needed because we now use RDTSC directly. Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-26tools/power turbostat: run on IVB XeonLen Brown
This fix is required to run on IVB Xeon, which previously had an incorrect cpuid model number listed. Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-25tools/power/acpi/acpidump: create acpidump(8), local make install targetsLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-25tools/power/acpi/acpidump: version 20101221 - find dynamic tables in sysfsYakui Zhao
This is unchanged version 20101221, plus a small bit in DEFINE_ALTERNATE_TYPES to enable building with latest kernel headers. This version finds dynamic tables exported by Linux in /sys/firmware/acpi/tables/dynamic Signed-off-by: Yakui Zhao <yakui.zhao@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-22Merge branch 'acpidump' into acpicaLen Brown
2012-09-22tools/power/acpi/acpidump: create acpidump(8), local make install targetsLen Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2012-09-22tools/power/acpi/acpidump: version 20101221 - find dynamic tables in sysfsLen Brown
This is unchanged version 20101221, plus a small bit in DEFINE_ALTERNATE_TYPES to enable building with latest kernel headers. This version finds dynamic tables exported by Linux in /sys/firmware/acpi/tables/dynamic Signed-off-by: Len Brown <len.brown@intel.com>