summaryrefslogtreecommitdiffstats
path: root/sound/usb
AgeCommit message (Collapse)Author
2009-03-18ALSA: snd-usb-caiaq: drop bogus iso packetsDaniel Mack
Drop inbound packets that are smaller than expected. This has been observed at the very beginning of the streaming transaction. And when the hardware is in panic mode (which can only very rarely happen in case of massive EMI chaos), mute the input channels. Signed-off-by: Daniel Mack <daniel@caiaq.de> Tested-by: Mark Hills <mark@pogo.org.uk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-18ALSA: snd-usb-caiaq: only warn once on streaming errorsDaniel Mack
Limit the number of printed warnings to one in case of streaming errors. printk() happens to be expensive, especially in code called as often as here. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-02sound: usb-audio: fix queue length check for high speed devicesClemens Ladisch
When checking for the maximum queue length, we have to take into account that MAX_QUEUE is measured in milliseconds (i.e., frames) while the unit of urb_packs is whatever data packet interval the device uses (possibly less than one frame when using high speed devices). Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-03-02sound: usb-audio: fix rules check for 32-channel devicesClemens Ladisch
When storing the channel numbers used by a format, and if the device happens to support 32 channels, the code would try to store 1<<32 in a 32-bit value. Since no valid format can have zero channels, we can use 1<<(channels-1) instead of 1<<channels so that all the channel numbers that we test for fit into 32 bits. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-26ALSA: sound/usb/usx2y: fix sparse warning: do-while statement is not a ↵Hannes Eder
compound ... Fix this sparse warning: sound/usb/usx2y/usbusx2y.c:231:33: warning: do-while statement is not a compound statement Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-26ALSA: sound/usb/usx2y: fix sparse warning: Should it be static?Hannes Eder
Impact: Move declaration to header file. Fix this sparse warning: sound/usb/usx2y/usx2yhwdeppcm.c:739:5: warning: symbol 'usX2Y_hwdep_pcm_new' was not declared. Should it be static? Signed-off-by: Hannes Eder <hannes@hanneseder.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-20sound: usb-audio: remove MIN_PACKS_URBClemens Ladisch
Remove the MIN_PACKS_URB symbol because other limits can force the number of packets down to one, regardless of the value of this symbol, and nobody has ever changed it anyway. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-16ALSA: usb-audio - Workaround for misdetected sample rate with CM6207Joris van Rantwijk
The CM6207 incorrectly advertises its 96 kHz playback setting as 48 kHz in its USB device descriptor. This patch extends an existing workaround in usbaudio.c to also cover the CM6207. This resolves issue 0004249 in the ALSA bug tracker. Signed-off-by: Joris van Rantwijk <jorispubl@xs4all.nl> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-16ALSA: usb-audio - Fix non-continuous rate detectionTakashi Iwai
The detection of non-continuous rates (given via rate tables) isn't processed properly (e.g. for type II). This patch fixes and simplifies the detection code. Tested-by: Joris van Rantwijk <jorispubl@xs4all.nl> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-16sound: usb-audio: fix uninitialized variable with M-Audio MIDI interfacesClemens Ladisch
Fix the snd_usbmidi_create_endpoints_midiman() function, which forgot to set the out_interval member of the endpoint info structure for Midiman/ M-Audio devices. Since kernel 2.6.24, any non-zero value makes the driver use interrupt transfers instead of bulk transfers. With EHCI controllers, these random interval values result in unbearably large latencies for output MIDI transfers. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Reported-by: David <devurandom@foobox.com> Tested-by: David <devurandom@foobox.com> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-06sound: usb-audio: handle wMaxPacketSize for FIXED_ENDPOINT devicesClemens Ladisch
For audio devices that do not have proper audio descriptors (e.g., Edirol UA-20), we use hardcoded parameters from our quirks list. However, we must still read the maximum packet size from the standard endpoint descriptor; otherwise, we might use packets that are too big and therefore rejected by the USB core. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05ALSA: usb - Add missing KERN_* prefix to printkTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05ALSA: snd-usb-caiaq: Increase version number to 1.3.12Mark Hills
Indicates fixes affecting control messages and switching of input mode on Audio 8 DJ and Audio 4 DJ. Signed-off-by: Mark Hills <mark@pogo.org.uk> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05ALSA: snd-usb-caiaq: Remove duplicate A8DJ controlMark Hills
Remove a duplicate control which causes an error when it is registered, and causes later controls to not be registered. The device does not have a fourth ground lift control. Signed-off-by: Mark Hills <mark@pogo.org.uk> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05ALSA: snd-usb-caiaq: Do not expose hardware input mode 0 of A4DJMark Hills
In the context of the Audio 4 DJ (when compared to Audio 8 DJ), hardware input mode 0 is not used. Expose modes 1 (line) and 2 (phono) to the user as modes 0 and 1 respectively. Signed-off-by: Mark Hills <mark@pogo.org.uk> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05ALSA: snd-usb-caiaq: Set default input mode of A4DJMark Hills
Do not start the device with input mode undefined. Mimic the behaviour of the Audio 8 DJ and start in phono input mode. Signed-off-by: Mark Hills <mark@pogo.org.uk> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05ALSA: snd-usb-caiaq: Send the correct command when setting controlsMark Hills
Fixes a bug where an incorrect command was sent which had no effect on the device. Signed-off-by: Mark Hills <mark@pogo.org.uk> Acked-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-02-05ALSA: Remove superfluous hwdep opsTakashi Iwai
Remove NOP hwdep ops in sound drivers. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-27ALSA: usbaudio - use printf format instead of hardcoding itAndreas Bergmeier
Rather use printf format instead of hardcoding prefix like 0x. A next step would be to predefine certain formats. Signed-off-by: Andreas Bergmeier <lcid-fire@gmx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-26sound: usb-audio: make URB sizes more equalClemens Ladisch
Distribute the packets evenly among the URBs, instead of making all URBs except the last one to have the maximum size. This makes the timing of pointer updates more regular and removes some special cases from the code. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-26sound: usb-audio: limit playback queue lengthClemens Ladisch
Once our URBs contain enough packets, queueing more URBs does not give us any additional underrun protection (as we use double-buffering) but just increases latency unnecessarily. Therefore, we try to limit the queue length to some reasonable value. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-26sound: usb-audio: use normal number of frames for no-data URBsClemens Ladisch
When sending a silence URB (before playback has started, or when it is paused), use the number of frames that would be normally sent instead of a single frame so that the rate at which completion interrupts arrive is consistent. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-18ALSA: usb-audio - Quirk for Serato phonoAndreas Bergmeier
Ignore errors (wrong usb interface data) found when using the serato scratch live box with alsa Thus the alsa controls can be accessed (beware: they don't work though - but at least it's one ugly error message less) Signed-off-by: Andreas Bergmeier <lcid-fire@gmx.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-17Merge branch 'topic/usb-mixer-cache' into next/usb-audioTakashi Iwai
2009-01-16ALSA: snd-usb-caiaq: support for two more audio devicesDaniel Mack
- Added support for two new audio devices from Native Instuments, 'Audio4DJ' and 'GuitarRig mobile' - Add missing statement about 'Session IO' in Kconfig help text - Version number bumped to 1.3.11 Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-15ALSA: usb-audio - Cache mixer valuesTakashi Iwai
Cache mixer values in usb-audio driver to reduce too excessive accesses to the hardware. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-14ALSA: USB quirk for Logitech Quickcam Pro 9000 nameSigned-off-by: Peter Stokes
The Logitech QuickCam Pro 9000 does not appear to any product identification strings in its USB device descriptor. Therefore it receives a device name of "USB Device 0x46d:0x990". Th e attached patch below adds a USB quirk to provide a more friendly name. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-13ALSA: rename "Device" to "Toshiba SB-0500" via quirksAndrea Borgia
Signed-off-by: Andrea Borgia <andrea@borgia.bo.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-12ALSA: Return proper error code at probe in sound/usb/*Takashi Iwai
Some drivers in soudn/usb/* don't handle the error code properly from snd_card_create(). This patch fixes these places. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-12ALSA: Convert to snd_card_create() in other sound/*Takashi Iwai
Convert from snd_card_new() to the new snd_card_create() function in other sound subdirectories. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-09ALSA: caiaq - Version 1.3.10Takashi Iwai
Increase the version number in module info to indicate the fixes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-08ALSA: caiaq - Fix Oops with MIDITakashi Iwai
The snd-usb-caiaq driver causes Oops occasionally when accessing MIDI devices. This patch fixes the Oops and invalid URB submission errors as well. Cc: stable@kernel.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-07ALSA: preliminary support for Toshiba SB-0500Andrea Borgia
The Toshiba Multimedia Center SB-0500 is a rebranded version of the Creative Technology SB Live! 24-bit External: it shares the same chipset and only has minor cosmetic differences. Remote controller works with alsa_usb module, basic audio is there and mixer controls are mostly untested. Signed-off-by: Andrea Borgia <andrea@borgia.bo.it> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-06trivial: fix then -> than typos in comments and documentationFrederik Schwarzer
- (better, more, bigger ...) then -> (...) than Signed-off-by: Frederik Schwarzer <schwarzerf@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-04ALSA: sound/usb: Use negated usb_endpoint_xfer_control, etcJulia Lawall
This patch extends 42a6e66f1e40a930d093c33ba0bb9d8d8e4555ed by using usb_endpoint_xfer_control, usb_endpoint_xfer_isoc, usb_endpoint_xfer_bulk, and usb_endpoint_xfer_int in the negated case as well. This patch also rewrites some calls to usb_endpoint_dir_in as negated calls to !usb_endpoint_dir_out, and vice versa, to better correspond to the intent of the original code. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct usb_endpoint_descriptor *epd; @@ - (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_CONTROL\|0\)) + !usb_endpoint_xfer_control(epd) @@ struct usb_endpoint_descriptor *epd; @@ - (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_ISOC\|1\)) + !usb_endpoint_xfer_isoc(epd) @@ struct usb_endpoint_descriptor *epd; @@ - (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_BULK\|2\)) + !usb_endpoint_xfer_bulk(epd) @@ struct usb_endpoint_descriptor *epd; @@ - (usb_endpoint_type(epd) != \(USB_ENDPOINT_XFER_INT\|3\)) + !usb_endpoint_xfer_int(epd) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-02ALSA: Use usb_set/get_intfdataJulia Lawall
Use the USB functions usb_get_intfdata and usb_set_intfdata instead of dev_get_drvdata and dev_set_drvdata, respectively. The semantic patch that makes this change for the usb_get_intfdata case is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @header@ @@ #include <linux/usb.h> @same depends on header@ position p; @@ usb_get_intfdata@p(...) { ... } @depends on header@ position _p!=same.p; identifier _f; struct usb_interface*intf; @@ _f@_p(...) { <+... - dev_get_drvdata(&intf->dev) + usb_get_intfdata(intf) ...+> } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-01ALSA: sound/usb: use USB API functions rather than constantsJulia Lawall
This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) @inc@ @@ #include <linux/usb.h> @depends on !inc && (r1||r5)@ @@ + #include <linux/usb.h> #include <linux/usb/...> // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-25Merge branch 'topic/convert-tasklet' into to-pushTakashi Iwai
2008-12-18ALSA: hda - Convert from takslet_hi_schedule() to tasklet_schedule()Takashi Iwai
Replace all tasklet_hi_schedule() callers with the normal tasklet_schedule(). The former often causes troubles with RT-kernels, and has actually no merit. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-10ALSA: sound: Make staticRoel Kluin
Sparse asked whether these could be static. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-11-27ALSA: snd-usb-caiaq: clean up the control adding codeDaniel Mack
snd-usb-caiaq: clean up the control adding code by moving dulpicate code to a function. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-30ALSA: usb - Add quirk for Edirol UA-25EX advanced modesTakashi Iwai
Added the quirk for UA-25EX advanced modes. UA-25EX is almost compatible with UA-25. Tested-by: Serge Perinsky <sergebass@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-15ALSA: us122l: fix missing unlock in usb_stream_hwdep_vm_fault()Li Zefan
Should unlock us122l->mutex before returning VM_FAULT_SIGBUS. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-10-10ALSA: usb-audio: dynamic detection of MIDI interfaces in uaxx-quirkPedro Lopez-Cabanillas
The MIDI interfaces have to be detected dynamically for Edirol devices ua-700, ua-25 and ua4-fx. This patch reverses the wrong changes made by my other patch in uaxx-quirk. Signed-off-by: Pedro Lopez-Cabanillas <pedro.lopez.cabanillas@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: snd-usb-audio: support for Edirol UA-4FX devicePedro Lopez-Cabanillas
Renamed the old quirk function for ua-700/ua-25 to become more generic, moving the MIDI interfaces to the quirk data header. Added a new quirk for the Edirol UA-4FX. Signed-off-by: Pedro Lopez-Cabanillas <pedro.lopez.cabanillas@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: usb - Fix possible Oops at USB-MIDI disconnectionTakashi Iwai
The endpoints should be released immediately at disconnection rather than the delayed release. This could be a reason of Oops at USB-audio device disconnection being used. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-10-10ALSA: usb-audio: add support for E-Mu Tracker PreEran Tromer
Add support for the E-Mu "Tracker Pre" USB sound card, following the example of the (very similar) E-Mu 0202 and E-Mu 0404 USB. As with the 0202 and 0404 USB, functionality is very limited: just a couple of sample rates, no volume/mute control, etc. Signed-off-by: Eran Tromer <eran@tromer.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-09-09ALSA: us122l - Add missing dependency on CONFIG_SND_HWDEPRandy Dunlap
CONFIG_SND_USB_US122L uses snd_hwdep_new(), so SND_HWDEP needs to be enabled (selected). ERROR: "snd_hwdep_new" [sound/usb/usx2y/snd-usb-us122l.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-15ALSA: usb-audio - Add ignore_ctl_error parameterTakashi Iwai
Added the ignore_ctl_error parameter to enable/disable the control-error handling for mixer interfaces. It was a hard-coded ifdef, and now you can change it more easily. Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13ALSA: Kill snd_assert() in other placesTakashi Iwai
Kill snd_assert() in other places, either removed or replaced with if () with snd_BUG_ON(). Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-02 09:37:25 +0000