summaryrefslogtreecommitdiffstats
path: root/kernel/cpu.c
AgeCommit message (Collapse)Author
2014-11-03cpu: Avoid puts_pending overflowPaul E. McKenney
A long string of get_online_cpus() with each followed by a put_online_cpu() that fails to acquire cpu_hotplug.lock can result in overflow of the cpu_hotplug.puts_pending counter. Although this is perhaps improbably, a system with absolutely no CPU-hotplug operations will have an arbitrarily long time in which this overflow could occur. This commit therefore adds overflow checks to get_online_cpus() and try_get_online_cpus(). Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Reviewed-by: Pranith Kumar <bobby.prani@gmail.com>
2014-10-23rcu: More on deadlock between CPU hotplug and expedited grace periodsPaul E. McKenney
Commit dd56af42bd82 (rcu: Eliminate deadlock between CPU hotplug and expedited grace periods) was incomplete. Although it did eliminate deadlocks involving synchronize_sched_expedited()'s acquisition of cpu_hotplug.lock via get_online_cpus(), it did nothing about the similar deadlock involving acquisition of this same lock via put_online_cpus(). This deadlock became apparent with testing involving hibernation. This commit therefore changes put_online_cpus() acquisition of this lock to be conditional, and increments a new cpu_hotplug.puts_pending field in case of acquisition failure. Then cpu_hotplug_begin() checks for this new field being non-zero, and applies any changes to cpu_hotplug.refcount. Reported-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Jiri Kosina <jkosina@suse.cz> Tested-by: Borislav Petkov <bp@suse.de>
2014-09-18rcu: Eliminate deadlock between CPU hotplug and expedited grace periodsPaul E. McKenney
Currently, the expedited grace-period primitives do get_online_cpus(). This greatly simplifies their implementation, but means that calls to them holding locks that are acquired by CPU-hotplug notifiers (to say nothing of calls to these primitives from CPU-hotplug notifiers) can deadlock. But this is starting to become inconvenient, as can be seen here: https://lkml.org/lkml/2014/8/5/754. The problem in this case is that some developers need to acquire a mutex from a CPU-hotplug notifier, but also need to hold it across a synchronize_rcu_expedited(). As noted above, this currently results in deadlock. This commit avoids the deadlock and retains the simplicity by creating a try_get_online_cpus(), which returns false if the get_online_cpus() reference count could not immediately be incremented. If a call to try_get_online_cpus() returns true, the expedited primitives operate as before. If a call returns false, the expedited primitives fall back to normal grace-period operations. This falling back of course results in increased grace-period latency, but only during times when CPU hotplug operations are actually in flight. The effect should therefore be negligible during normal operation. Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@joshtriplett.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Tested-by: Lan Tianyu <tianyu.lan@intel.com>
2014-07-05sched: Rework check_for_tasks()Kirill Tkhai
1) Iterate thru all of threads in the system. Check for all threads, not only for group leaders. 2) Check for p->on_rq instead of p->state and cputime. Preempted task in !TASK_RUNNING state OR just created task may be queued, that we want to be reported too. 3) Use read_lock() instead of write_lock(). This function does not change any structures, and read_lock() is enough. Signed-off-by: Kirill Tkhai <ktkhai@parallels.com> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ben Segall <bsegall@google.com> Cc: Fabian Frederick <fabf@skynet.be> Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Cc: Konstantin Khorenko <khorenko@parallels.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael wang <wangyun@linux.vnet.ibm.com> Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Paul Turner <pjt@google.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Todd E Brandt <todd.e.brandt@linux.intel.com> Cc: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1403684395.3462.44.camel@tkhai Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-06-12Merge tag 'pm+acpi-3.16-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management updates from Rafael Wysocki: "These are fixups on top of the previous PM+ACPI pull request, regression fixes (ACPI hotplug, cpufreq ppc-corenet), other bug fixes (ACPI reset, cpufreq), new PM trace points for system suspend profiling and a copyright notice update. Specifics: - I didn't remember correctly that the Hans de Goede's ACPI video patches actually didn't flip the video.use_native_backlight default, although we had discussed that and decided to do that. Since I said we would do that in the previous PM+ACPI pull request, make that change for real now. - ACPI bus check notifications for PCI host bridges don't cause the bus below the host bridge to be checked for changes as they should because of a mistake in the ACPI-based PCI hotplug (ACPIPHP) subsystem that forgets to add hotplug contexts to PCI host bridge ACPI device objects. Create hotplug contexts for PCI host bridges too as appropriate. - Revert recent cpufreq commit related to the big.LITTLE cpufreq driver that breaks arm64 builds. - Fix for a regression in the ppc-corenet cpufreq driver introduced during the 3.15 cycle and causing the driver to use the remainder from do_div instead of the quotient. From Ed Swarthout. - Resets triggered by panic activate a BUG_ON() in vmalloc.c on systems where the ACPI reset register is located in memory address space. Fix from Randy Wright. - Fix for a problem with cpufreq governors that decisions made by them may be suboptimal due to the fact that deferrable timers are used by them for CPU load sampling. From Srivatsa S Bhat. - Fix for a problem with the Tegra cpufreq driver where the CPU frequency is temporarily switched to a "stable" level that is different from both the initial and target frequencies during transitions which causes udelay() to expire earlier than it should sometimes. From Viresh Kumar. - New trace points and rework of some existing trace points for system suspend/resume profiling from Todd Brandt. - Assorted cpufreq fixes and cleanups from Stratos Karafotis and Viresh Kumar. - Copyright notice update for suspend-and-cpuhotplug.txt from Srivatsa S Bhat" * tag 'pm+acpi-3.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / hotplug / PCI: Add hotplug contexts to PCI host bridges PM / sleep: trace events for device PM callbacks cpufreq: cpufreq-cpu0: remove dependency on THERMAL and REGULATOR cpufreq: tegra: update comment for clarity cpufreq: intel_pstate: Remove duplicate CPU ID check cpufreq: Mark CPU0 driver with CPUFREQ_NEED_INITIAL_FREQ_CHECK flag PM / Documentation: Update copyright in suspend-and-cpuhotplug.txt cpufreq: governor: remove copy_prev_load from 'struct cpu_dbs_common_info' cpufreq: governor: Be friendly towards latency-sensitive bursty workloads PM / sleep: trace events for suspend/resume cpufreq: ppc-corenet-cpu-freq: do_div use quotient Revert "cpufreq: Enable big.LITTLE cpufreq driver on arm64" cpufreq: Tegra: implement intermediate frequency callbacks cpufreq: add support for intermediate (stable) frequencies ACPI / video: Change the default for video.use_native_backlight to 1 ACPI: Fix bug when ACPI reset register is implemented in system memory
2014-06-12Merge branch 'pm-sleep'Rafael J. Wysocki
* pm-sleep: PM / sleep: trace events for device PM callbacks PM / sleep: trace events for suspend/resume
2014-06-07PM / sleep: trace events for suspend/resumeTodd E Brandt
Adds trace events that give finer resolution into suspend/resume. These events are graphed in the timelines generated by the analyze_suspend.py script. They represent large areas of time consumed that are typical to suspend and resume. The event is triggered by calling the function "trace_suspend_resume" with three arguments: a string (the name of the event to be displayed in the timeline), an integer (case specific number, such as the power state or cpu number), and a boolean (where true is used to denote the start of the timeline event, and false to denote the end). The suspend_resume trace event reproduces the data that the machine_suspend trace event did, so the latter has been removed. Signed-off-by: Todd Brandt <todd.e.brandt@intel.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-06-04kernel/cpu.c: convert printk to pr_foo()Fabian Frederick
no level printk converted to pr_warn (if err) no level printk converted to pr_info (disabling non-boot cpus) Other printk converted to respective level. Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-22sched: Fix hotplug vs. set_cpus_allowed_ptr()Lai Jiangshan
Lai found that: WARNING: CPU: 1 PID: 13 at arch/x86/kernel/smp.c:124 native_smp_send_reschedule+0x2d/0x4b() ... migration_cpu_stop+0x1d/0x22 was caused by set_cpus_allowed_ptr() assuming that cpu_active_mask is always a sub-set of cpu_online_mask. This isn't true since 5fbd036b552f ("sched: Cleanup cpu_active madness"). So set active and online at the same time to avoid this particular problem. Fixes: 5fbd036b552f ("sched: Cleanup cpu_active madness") Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Michael wang <wangyun@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Toshi Kani <toshi.kani@hp.com> Link: http://lkml.kernel.org/r/53758B12.8060609@cn.fujitsu.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-03-20CPU hotplug: Provide lockless versions of callback registration functionsSrivatsa S. Bhat
The following method of CPU hotplug callback registration is not safe due to the possibility of an ABBA deadlock involving the cpu_add_remove_lock and the cpu_hotplug.lock. get_online_cpus(); for_each_online_cpu(cpu) init_cpu(cpu); register_cpu_notifier(&foobar_cpu_notifier); put_online_cpus(); The deadlock is shown below: CPU 0 CPU 1 ----- ----- Acquire cpu_hotplug.lock [via get_online_cpus()] CPU online/offline operation takes cpu_add_remove_lock [via cpu_maps_update_begin()] Try to acquire cpu_add_remove_lock [via register_cpu_notifier()] CPU online/offline operation tries to acquire cpu_hotplug.lock [via cpu_hotplug_begin()] *** DEADLOCK! *** The problem here is that callback registration takes the locks in one order whereas the CPU hotplug operations take the same locks in the opposite order. To avoid this issue and to provide a race-free method to register CPU hotplug callbacks (along with initialization of already online CPUs), introduce new variants of the callback registration APIs that simply register the callbacks without holding the cpu_add_remove_lock during the registration. That way, we can avoid the ABBA scenario. However, we will need to hold the cpu_add_remove_lock throughout the entire critical section, to protect updates to the callback/notifier chain. This can be achieved by writing the callback registration code as follows: cpu_maps_update_begin(); [ or cpu_notifier_register_begin(); see below ] for_each_online_cpu(cpu) init_cpu(cpu); /* This doesn't take the cpu_add_remove_lock */ __register_cpu_notifier(&foobar_cpu_notifier); cpu_maps_update_done(); [ or cpu_notifier_register_done(); see below ] Note that we can't use get_online_cpus() here instead of cpu_maps_update_begin() because the cpu_hotplug.lock is dropped during the invocation of CPU_POST_DEAD notifiers, and hence get_online_cpus() cannot provide the necessary synchronization to protect the callback/notifier chains against concurrent reads and writes. On the other hand, since the cpu_add_remove_lock protects the entire hotplug operation (including CPU_POST_DEAD), we can use cpu_maps_update_begin/done() to guarantee proper synchronization. Also, since cpu_maps_update_begin/done() is like a super-set of get/put_online_cpus(), the former naturally protects the critical sections from concurrent hotplug operations. Since the names cpu_maps_update_begin/done() don't make much sense in CPU hotplug callback registration scenarios, we'll introduce new APIs named cpu_notifier_register_begin/done() and map them to cpu_maps_update_begin/done(). In summary, introduce the lockless variants of un/register_cpu_notifier() and also export the cpu_notifier_register_begin/done() APIs for use by modules. This way, we provide a race-free way to register hotplug callbacks as well as perform initialization for the CPUs that are already online. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Toshi Kani <toshi.kani@hp.com> Reviewed-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-03-20CPU hotplug: Add lockdep annotations to get/put_online_cpus()Gautham R. Shenoy
Add lockdep annotations for get/put_online_cpus() and cpu_hotplug_begin()/cpu_hotplug_end(). Cc: Ingo Molnar <mingo@kernel.org> Reviewed-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Gautham R. Shenoy <ego@linux.vnet.ibm.com> Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-11-14Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "Four bugfixes and one performance fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/fair: Avoid integer overflow sched: Optimize task_sched_runtime() sched/numa: Cure update_numa_stats() vs. hotplug sched/numa: Fix NULL pointer dereference in task_numa_migrate() sched: Fix endless sync_sched/rcu() loop inside _cpu_down()
2013-11-13sched: Fix endless sync_sched/rcu() loop inside _cpu_down()Michael wang
Commit 6acce3ef8: sched: Remove get_online_cpus() usage tries to do sync_sched/rcu() inside _cpu_down() but triggers: INFO: task swapper/0:1 blocked for more than 120 seconds. ... [<ffffffff811263dc>] synchronize_rcu+0x2c/0x30 [<ffffffff81d1bd82>] _cpu_down+0x2b2/0x340 ... It was caused by that in the rcu boost case we rely on smpboot thread to finish the rcu callback, which has already been parked before sync in here and leads to the endless sync_sched/rcu(). This patch exchanges the sequence of smpboot_park_threads() and sync_sched/rcu() to fix the bug. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Michael Wang <wangyun@linux.vnet.ibm.com> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/5282EDC0.6060003@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13cpu/mem hotplug: add try_online_node() for cpu_up()Toshi Kani
cpu_up() has #ifdef CONFIG_MEMORY_HOTPLUG code blocks, which call mem_online_node() to put its node online if offlined and then call build_all_zonelists() to initialize the zone list. These steps are specific to memory hotplug, and should be managed in mm/memory_hotplug.c. lock_memory_hotplug() should also be held for the whole steps. For this reason, this patch replaces mem_online_node() with try_online_node(), which performs the whole steps with lock_memory_hotplug() held. try_online_node() is named after try_offline_node() as they have similar purpose. There is no functional change in this patch. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-10-16sched: Remove get_online_cpus() usagePeter Zijlstra
Remove get_online_cpus() usage from the scheduler; there's 4 sites that use it: - sched_init_smp(); where its completely superfluous since we're in 'early' boot and there simply cannot be any hotplugging. - sched_getaffinity(); we already take a raw spinlock to protect the task cpus_allowed mask, this disables preemption and therefore also stabilizes cpu_online_mask as that's modified using stop_machine. However switch to active mask for symmetry with sched_setaffinity()/set_cpus_allowed_ptr(). We guarantee active mask stability by inserting sync_rcu/sched() into _cpu_down. - sched_setaffinity(); we don't appear to need get_online_cpus() either, there's two sites where hotplug appears relevant: * cpuset_cpus_allowed(); for the !cpuset case we use possible_mask, for the cpuset case we hold task_lock, which is a spinlock and thus for mainline disables preemption (might cause pain on RT). * set_cpus_allowed_ptr(); Holds all scheduler locks and thus has preemption properly disabled; also it already deals with hotplug races explicitly where it releases them. - migrate_swap(); we can make stop_two_cpus() do the heavy lifting for us with a little trickery. By adding a sync_sched/rcu() after the CPU_DOWN_PREPARE notifier we can provide preempt/rcu guarantees for cpu_active_mask. Use these to validate that both our cpus are active when queueing the stop work before we queue the stop_machine works for take_cpu_down(). Signed-off-by: Peter Zijlstra <peterz@infradead.org> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Oleg Nesterov <oleg@redhat.com> Link: http://lkml.kernel.org/r/20131011123820.GV3081@twins.programming.kicks-ass.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-08-13ACPI / processor: Acquire writer lock to update CPU mapsToshi Kani
CPU system maps are protected with reader/writer locks. The reader lock, get_online_cpus(), assures that the maps are not updated while holding the lock. The writer lock, cpu_hotplug_begin(), is used to udpate the cpu maps along with cpu_maps_update_begin(). However, the ACPI processor handler updates the cpu maps without holding the the writer lock. acpi_map_lsapic() is called from acpi_processor_hotadd_init() to update cpu_possible_mask and cpu_present_mask. acpi_unmap_lsapic() is called from acpi_processor_remove() to update cpu_possible_mask. Currently, they are either unprotected or protected with the reader lock, which is not correct. For example, the get_online_cpus() below is supposed to assure that cpu_possible_mask is not changed while the code is iterating with for_each_possible_cpu(). get_online_cpus(); for_each_possible_cpu(cpu) { : } put_online_cpus(); However, this lock has no protection with CPU hotplug since the ACPI processor handler does not use the writer lock when it updates cpu_possible_mask. The reader lock does not serialize within the readers. This patch protects them with the writer lock with cpu_hotplug_begin() along with cpu_maps_update_begin(), which must be held before calling cpu_hotplug_begin(). It also protects arch_register_cpu() / arch_unregister_cpu(), which creates / deletes a sysfs cpu device interface. For this purpose it changes cpu_hotplug_begin() and cpu_hotplug_done() to global and exports them in cpu.h. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-07-14kernel: delete __cpuinit usage from all core kernel filesPaul Gortmaker
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. This removes all the uses of the __cpuinit macros from C files in the core kernel directories (kernel, init, lib, mm, and include) that don't really have a specific maintainer. [1] https://lkml.org/lkml/2013/5/20/589 Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-06-12CPU hotplug: provide a generic helper to disable/enable CPU hotplugSrivatsa S. Bhat
There are instances in the kernel where we would like to disable CPU hotplug (from sysfs) during some important operation. Today the freezer code depends on this and the code to do it was kinda tailor-made for that. Restructure the code and make it generic enough to be useful for other usecases too. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Robin Holt <holt@sgi.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-19Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull preparatory smp/hotplug patches from Ingo Molnar: "Some early preparatory changes for the WIP hotplug rework by Thomas Gleixner." * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: stop_machine: Use smpboot threads stop_machine: Store task reference in a separate per cpu variable smpboot: Allow selfparking per cpu threads
2013-02-14stop_machine: Use smpboot threadsThomas Gleixner
Use the smpboot thread infrastructure. Mark the stopper thread selfparking and park it after it has finished the take_cpu_down() work. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paulmck@linux.vnet.ibm.com> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Arjan van de Veen <arjan@infradead.org> Cc: Paul Turner <pjt@google.com> Cc: Richard Weinberger <rw@linutronix.de> Cc: Magnus Damm <magnus.damm@gmail.com> Link: http://lkml.kernel.org/r/20130131120741.686315164@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2013-01-27cputime: Use accessors to read task cputime statsFrederic Weisbecker
This is in preparation for the full dynticks feature. While remotely reading the cputime of a task running in a full dynticks CPU, we'll need to do some extra-computation. This way we can account the time it spent tickless in userspace since its last cputime snapshot. Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Li Zhong <zhong@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de>
2012-12-11Merge branch 'x86-bsp-hotplug-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 BSP hotplug changes from Ingo Molnar: "This tree enables CPU#0 (the boot processor) to be onlined/offlined on x86, just like any other CPU. Enabled on Intel CPUs for now. Allowing this required the identification and fixing of latent CPU#0 assumptions (such as CPU#0 initializations, etc.) in the x86 architecture code, plus the identification of barriers to BSP-offlining, such as active PIC interrupts which can only be serviced on the BSP. It's behind a default-off option, and there's a debug option that allows the automatic testing of this feature. The motivation of this feature is to allow and prepare for true CPU-hotplug hardware support: recent changes to MCE support enable us to detect a deteriorating but not yet hard-failing L1/L2 cache on a CPU that could be soft-unplugged - or a failing L3 cache on a multi-socket system. Note that true hardware hot-plug is not yet fully enabled by this, because that requires a special platform wakeup sequence to be sent to the freshly powered up CPU#0. Future patches for this are planned, once such a platform exists. Chicken and egg" * 'x86-bsp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, topology: Debug CPU0 hotplug x86/i387.c: Initialize thread xstate only on CPU0 only once x86, hotplug: Handle retrigger irq by the first available CPU x86, hotplug: The first online processor saves the MTRR state x86, hotplug: During CPU0 online, enable x2apic, set_numa_node. x86, hotplug: Wake up CPU0 via NMI instead of INIT, SIPI, SIPI x86-32, hotplug: Add start_cpu0() entry point to head_32.S x86-64, hotplug: Add start_cpu0() entry point to head_64.S kernel/cpu.c: Add comment for priority in cpu_hotplug_pm_callback x86, hotplug, suspend: Online CPU0 for suspend or hibernate x86, hotplug: Support functions for CPU0 online/offline x86, topology: Don't offline CPU0 if any PIC irq can not be migrated out of it x86, Kconfig: Add config switch for CPU0 hotplug doc: Add x86 CPU0 online/offline feature
2012-11-15ACPI / processor: prevent cpu from becoming onlineYasuaki Ishimatsu
Even if acpi_processor_handle_eject() offlines cpu, there is a chance to online the cpu after that. So the patch closes the window by using get/put_online_cpus(). Why does the patch change _cpu_up() logic? The patch cares the race of hot-remove cpu and _cpu_up(). If the patch does not change it, there is the following race. hot-remove cpu | _cpu_up() ------------------------------------- ------------------------------------ call acpi_processor_handle_eject() | call cpu_down() | call get_online_cpus() | | call cpu_hotplug_begin() and stop here call arch_unregister_cpu() | call acpi_unmap_lsapic() | call put_online_cpus() | | start and continue _cpu_up() return acpi_processor_remove() | continue hot-remove the cpu | So _cpu_up() can continue to itself. And hot-remove cpu can also continue itself. If the patch changes _cpu_up() logic, the race disappears as below: hot-remove cpu | _cpu_up() ----------------------------------------------------------------------- call acpi_processor_handle_eject() | call cpu_down() | call get_online_cpus() | | call cpu_hotplug_begin() and stop here call arch_unregister_cpu() | call acpi_unmap_lsapic() | cpu's cpu_present is set | to false by set_cpu_present()| call put_online_cpus() | | start _cpu_up() | check cpu_present() and return -EINVAL return acpi_processor_remove() | continue hot-remove the cpu | Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Reviewed-by: Toshi Kani <toshi.kani@hp.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2012-11-14kernel/cpu.c: Add comment for priority in cpu_hotplug_pm_callbackFenghua Yu
cpu_hotplug_pm_callback should have higher priority than bsp_pm_callback which depends on cpu_hotplug_pm_callback to disable cpu hotplug to avoid race during bsp online checking. This is to hightlight the priorities between the two callbacks in case people may overlook the order. Ideally the priorities should be defined in macro/enum instead of fixed values. To do that, a seperate patchset may be pushed which will touch serveral other generic files and is out of scope of this patchset. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Link: http://lkml.kernel.org/r/1352835171-3958-7-git-send-email-fenghua.yu@intel.com Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-10-09CPU hotplug, debug: detect imbalance between get_online_cpus() and ↵Srivatsa S. Bhat
put_online_cpus() The synchronization between CPU hotplug readers and writers is achieved by means of refcounting, safeguarded by the cpu_hotplug.lock. get_online_cpus() increments the refcount, whereas put_online_cpus() decrements it. If we ever hit an imbalance between the two, we end up compromising the guarantees of the hotplug synchronization i.e, for example, an extra call to put_online_cpus() can end up allowing a hotplug reader to execute concurrently with a hotplug writer. So, add a WARN_ON() in put_online_cpus() to detect such cases where the refcount can go negative, and also attempt to fix it up, so that we can continue to run. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-01Merge branch 'x86-asm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/asm changes from Ingo Molnar: "The one change that stands out is the alternatives patching change that prevents us from ever patching back instructions from SMP to UP: this simplifies things and speeds up CPU hotplug. Other than that it's smaller fixes, cleanups and improvements." * 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Unspaghettize do_trap() x86_64: Work around old GAS bug x86: Use REP BSF unconditionally x86: Prefer TZCNT over BFS x86/64: Adjust types of temporaries used by ffs()/fls()/fls64() x86: Drop unnecessary kernel_eflags variable on 64-bit x86/smp: Don't ever patch back to UP if we unplug cpus
2012-08-23x86/smp: Don't ever patch back to UP if we unplug cpusRusty Russell
We still patch SMP instructions to UP variants if we boot with a single CPU, but not at any other time. In particular, not if we unplug CPUs to return to a single cpu. Paul McKenney points out: mean offline overhead is 6251/48=130.2 milliseconds. If I remove the alternatives_smp_switch() from the offline path [...] the mean offline overhead is 550/42=13.1 milliseconds Basically, we're never going to get those 120ms back, and the code is pretty messy. We get rid of: 1) The "smp-alt-once" boot option. It's actually "smp-alt-boot", the documentation is wrong. It's now the default. 2) The skip_smp_alternatives flag used by suspend. 3) arch_disable_nonboot_cpus_begin() and arch_disable_nonboot_cpus_end() which were only used to set this one flag. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul McKenney <paul.mckenney@us.ibm.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/87vcgwwive.fsf@rustcorp.com.au Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-08-13smpboot: Provide infrastructure for percpu hotplug threadsThomas Gleixner
Provide a generic interface for setting up and tearing down percpu threads. On registration the threads for already online cpus are created and started. On deregistration (modules) the threads are stoppped. During hotplug operations the threads are created, started, parked and unparked. The datastructure for registration provides a pointer to percpu storage space and optional setup, cleanup, park, unpark functions. These functions are called when the thread state changes. Each implementation has to provide a function which is queried and returns whether the thread should run and the thread function itself. The core code handles all state transitions and avoids duplicated code in the call sites. [ paulmck: Preemption leak fix ] Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20120716103948.352501068@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-07-31mm/hotplug: correctly setup fallback zonelists when creating new pgdatJiang Liu
When hotadd_new_pgdat() is called to create new pgdat for a new node, a fallback zonelist should be created for the new node. There's code to try to achieve that in hotadd_new_pgdat() as below: /* * The node we allocated has no zone fallback lists. For avoiding * to access not-initialized zonelist, build here. */ mutex_lock(&zonelists_mutex); build_all_zonelists(pgdat, NULL); mutex_unlock(&zonelists_mutex); But it doesn't work as expected. When hotadd_new_pgdat() is called, the new node is still in offline state because node_set_online(nid) hasn't been called yet. And build_all_zonelists() only builds zonelists for online nodes as: for_each_online_node(nid) { pg_data_t *pgdat = NODE_DATA(nid); build_zonelists(pgdat); build_zonelist_cache(pgdat); } Though we hope to create zonelist for the new pgdat, but it doesn't. So add a new parameter "pgdat" the build_all_zonelists() to build pgdat for the new pgdat too. Signed-off-by: Jiang Liu <liuj97@gmail.com> Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Cc: Minchan Kim <minchan@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Keping Chen <chenkeping@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31kernel/cpu.c: document clear_tasks_mm_cpumask()Anton Vorontsov
Add more comments on clear_tasks_mm_cpumask, plus adds a runtime check: the function is only suitable for offlined CPUs, and if called inappropriately, the kernel should scream aloud. [akpm@linux-foundation.org: tweak comment: s/walks up/walks/, use 80 cols] Suggested-by: Andrew Morton <akpm@linux-foundation.org> Suggested-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31cpu: introduce clear_tasks_mm_cpumask() helperAnton Vorontsov
Many architectures clear tasks' mm_cpumask like this: read_lock(&tasklist_lock); for_each_process(p) { if (p->mm) cpumask_clear_cpu(cpu, mm_cpumask(p->mm)); } read_unlock(&tasklist_lock); Depending on the context, the code above may have several problems, such as: 1. Working with task->mm w/o getting mm or grabing the task lock is dangerous as ->mm might disappear (exit_mm() assigns NULL under task_lock(), so tasklist lock is not enough). 2. Checking for process->mm is not enough because process' main thread may exit or detach its mm via use_mm(), but other threads may still have a valid mm. This patch implements a small helper function that does things correctly, i.e.: 1. We take the task's lock while whe handle its mm (we can't use get_task_mm()/mmput() pair as mmput() might sleep); 2. To catch exited main thread case, we use find_lock_task_mm(), which walks up all threads and returns an appropriate task (with task lock held). Also, Per Peter Zijlstra's idea, now we don't grab tasklist_lock in the new helper, instead we take the rcu read lock. We can do this because the function is called after the cpu is taken down and marked offline, so no new tasks will get this cpu set in their mm mask. Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Cc: Richard Weinberger <richard@nod.at> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-03smp, idle: Allocate idle thread for each possible cpu during bootSuresh Siddha
percpu areas are already allocated during boot for each possible cpu. percpu idle threads can be considered as an extension of the percpu areas, and allocate them for each possible cpu during boot. This will eliminate the need for workqueue based idle thread allocation. In future we can move the idle thread area into the percpu area too. [ tglx: Moved the loop into smpboot.c and added an error check when the init code failed to allocate an idle thread for a cpu which should be onlined ] Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Tejun Heo <tj@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: venki@google.com Link: http://lkml.kernel.org/r/1334966930.28674.245.camel@sbsiddha-desk.sc.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-04-26smp: Provide generic idle thread allocationThomas Gleixner
All SMP architectures have magic to fork the idle task and to store it for reusage when cpu hotplug is enabled. Provide a generic infrastructure for it. Create/reinit the idle thread for the cpu which is brought up in the generic code and hand the thread pointer to the architecture code via __cpu_up(). Note, that fork_idle() is called via a workqueue, because this guarantees that the idle thread does not get a reference to a user space VM. This can happen when the boot process did not bring up all possible cpus and a later cpu_up() is initiated via the sysfs interface. In that case fork_idle() would be called in the context of the user space task and take a reference on the user space VM. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David S. Miller <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Richard Weinberger <richard@nod.at> Cc: x86@kernel.org Acked-by: Venkatesh Pallipadi <venki@google.com> Link: http://lkml.kernel.org/r/20120420124557.102478630@linutronix.de
2012-04-26smp: Add generic smpboot facilityThomas Gleixner
Start a new file, which will hold SMP and CPU hotplug related generic infrastructure. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David S. Miller <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Richard Weinberger <richard@nod.at> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/20120420124557.035417523@linutronix.de
2012-04-26smp: Add task_struct argument to __cpu_up()Thomas Gleixner
Preparatory patch to make the idle thread allocation for secondary cpus generic. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Cc: Matt Turner <mattst88@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Mike Frysinger <vapier@gentoo.org> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Richard Kuo <rkuo@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Cc: James E.J. Bottomley <jejb@parisc-linux.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David S. Miller <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Richard Weinberger <richard@nod.at> Cc: x86@kernel.org Link: http://lkml.kernel.org/r/20120420124556.964170564@linutronix.de
2012-01-08Merge branch 'pm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm * 'pm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (76 commits) PM / Hibernate: Implement compat_ioctl for /dev/snapshot PM / Freezer: fix return value of freezable_schedule_timeout_killable() PM / shmobile: Allow the A4R domain to be turned off at run time PM / input / touchscreen: Make st1232 use device PM QoS constraints PM / QoS: Introduce dev_pm_qos_add_ancestor_request() PM / shmobile: Remove the stay_on flag from SH7372's PM domains PM / shmobile: Don't include SH7372's INTCS in syscore suspend/resume PM / shmobile: Add support for the sh7372 A4S power domain / sleep mode PM: Drop generic_subsys_pm_ops PM / Sleep: Remove forward-only callbacks from AMBA bus type PM / Sleep: Remove forward-only callbacks from platform bus type PM: Run the driver callback directly if the subsystem one is not there PM / Sleep: Make pm_op() and pm_noirq_op() return callback pointers PM/Devfreq: Add Exynos4-bus device DVFS driver for Exynos4210/4212/4412. PM / Sleep: Merge internal functions in generic_ops.c PM / Sleep: Simplify generic system suspend callbacks PM / Hibernate: Remove deprecated hibernation snapshot ioctls PM / Sleep: Fix freezer failures due to racy usermodehelper_is_disabled() ARM: S3C64XX: Implement basic power domain support PM / shmobile: Use common always on power domain governor ... Fix up trivial conflict in fs/xfs/xfs_buf.c due to removal of unused XBT_FORCE_SLEEP bit
2012-01-06Merge branch 'sched-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (40 commits) sched/tracing: Add a new tracepoint for sleeptime sched: Disable scheduler warnings during oopses sched: Fix cgroup movement of waking process sched: Fix cgroup movement of newly created process sched: Fix cgroup movement of forking process sched: Remove cfs bandwidth period check in tg_set_cfs_period() sched: Fix load-balance lock-breaking sched: Replace all_pinned with a generic flags field sched: Only queue remote wakeups when crossing cache boundaries sched: Add missing rcu_dereference() around ->real_parent usage [S390] fix cputime overflow in uptime_proc_show [S390] cputime: add sparse checking and cleanup sched: Mark parent and real_parent as __rcu sched, nohz: Fix missing RCU read lock sched, nohz: Set the NOHZ_BALANCE_KICK flag for idle load balancer sched, nohz: Fix the idle cpu check in nohz_idle_balance sched: Use jump_labels for sched_feat sched/accounting: Fix parameter passing in task_group_account_field sched/accounting: Fix user/system tick double accounting sched/accounting: Re-use scheduler statistics for the root cgroup ... Fix up conflicts in - arch/ia64/include/asm/cputime.h, include/asm-generic/cputime.h usecs_to_cputime64() vs the sparse cleanups - kernel/sched/fair.c, kernel/time/tick-sched.c scheduler changes in multiple branches
2011-12-15[S390] cputime: add sparse checking and cleanupMartin Schwidefsky
Make cputime_t and cputime64_t nocast to enable sparse checking to detect incorrect use of cputime. Drop the cputime macros for simple scalar operations. The conversion macros are still needed. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-12-12cpu: Export cpu_up()Paul E. McKenney
Building rcutorture as a module requires cpu_up() as well as cpu_down() exported, so apply EXPORT_SYMBOL_GPL(). Signed-off-by: Paul E. McKenney <paul.mckenney@linaro.org> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2011-11-23CPU: Add right qualifiers for alloc_frozen_cpus() and cpu_hotplug_pm_sync_init()Fenghua Yu
Add __init for functions alloc_frozen_cpus() and cpu_hotplug_pm_sync_init() because they are only called during boot time. Add static for function cpu_hotplug_pm_sync_init() because its scope is limited in this file only. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-04PM / Sleep: Fix race between CPU hotplug and freezerSrivatsa S. Bhat
The CPU hotplug notifications sent out by the _cpu_up() and _cpu_down() functions depend on the value of the 'tasks_frozen' argument passed to them (which indicates whether tasks have been frozen or not). (Examples for such CPU hotplug notifications: CPU_ONLINE, CPU_ONLINE_FROZEN, CPU_DEAD, CPU_DEAD_FROZEN). Thus, it is essential that while the callbacks for those notifications are running, the state of the system with respect to the tasks being frozen or not remains unchanged, *throughout that duration*. Hence there is a need for synchronizing the CPU hotplug code with the freezer subsystem. Since the freezer is involved only in the Suspend/Hibernate call paths, this patch hooks the CPU hotplug code to the suspend/hibernate notifiers PM_[SUSPEND|HIBERNATE]_PREPARE and PM_POST_[SUSPEND|HIBERNATE] to prevent the race between CPU hotplug and freezer, thus ensuring that CPU hotplug notifications will always be run with the state of the system really being what the notifications indicate, _throughout_ their execution time. Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2011-10-31kernel: Map most files to use export.h instead of module.hPaul Gortmaker
The changed files were only including linux/module.h for the EXPORT_SYMBOL infrastructure, and nothing else. Revector them onto the isolated export header for faster compile times. Nothing to see here but a whole lot of instances of: -#include <linux/module.h> +#include <linux/export.h> This commit is only changing the kernel dir; next targets will probably be mm, fs, the arch dirs, etc. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-03-31Fix common misspellingsLucas De Marchi
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-22kernel/cpu.c: fix many errors related to style.Michael Rodriguez
Change the printk() calls to have the KERN_INFO/KERN_ERROR stuff, and fixes other coding style errors. Not _all_ of them are gone, though. [akpm@linux-foundation.org: revert the bits I disagree with] Signed-off-by: Michael Rodriguez <dkingston02@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-06Merge branches 'x86-alternatives-for-linus', 'x86-fpu-for-linus', ↵Linus Torvalds
'x86-hwmon-for-linus', 'x86-paravirt-for-linus', 'core-locking-for-linus' and 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-alternatives-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, suspend: Avoid unnecessary smp alternatives switch during suspend/resume * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86-64, asm: Use fxsaveq/fxrestorq in more places * 'x86-hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, hwmon: Add core threshold notification to therm_throt.c * 'x86-paravirt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, paravirt: Use native_halt on a halt, not native_safe_halt * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: locking, lockdep: Convert sprintf_symbol to %pS * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: irq: Better struct irqaction layout
2010-12-13x86, suspend: Avoid unnecessary smp alternatives switch during suspend/resumeSuresh Siddha
During suspend, we disable all the non boot cpus. And during resume we bring them all back again. So no need to do alternatives_smp_switch() in between. On my core 2 based laptop, this speeds up the suspend path by 15msec and the resume path by 5 msec (suspend/resume speed up differences can be attributed to the different P-states that the cpu is in during suspend/resume). Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> LKML-Reference: <1290557500.4946.8.camel@sbsiddha-MOBL3.sc.intel.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-11-23cpu: Remove incorrect BUG_ONPeter Zijlstra
Oleg mentioned that there is no actual guarantee the dying cpu's migration thread is actually finished running when we get there, so replace the BUG_ON() with a spinloop waiting for it. Reported-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-23cpu: Remove unused variableDhaval Giani
GCC warns us about: kernel/cpu.c: In function ‘take_cpu_down’: kernel/cpu.c:200:15: warning: unused variable ‘cpu’ This variable is unused since param->hcpu is directly used later on in cpu_notify. Signed-off-by: Dhaval Giani <dhaval_giani@gmail.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1290091494.1145.5.camel@gondor.retis> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-11-18sched: Simplify cpu-hot-unplug task migrationPeter Zijlstra
While discussing the need for sched_idle_next(), Oleg remarked that since try_to_wake_up() ensures sleeping tasks will end up running on a sane cpu, we can do away with migrate_live_tasks(). If we then extend the existing hack of migrating current from CPU_DYING to migrating the full rq worth of tasks from CPU_DYING, the need for the sched_idle_next() abomination disappears as well, since idle will be the only possible thread left after the migration thread stops. This greatly simplifies the hot-unplug task migration path, as can be seen from the resulting code reduction (and about half the new lines are comments). Suggested-by: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1289851597.2109.547.camel@laptop> Signed-off-by: Ingo Molnar <mingo@elte.hu>