summaryrefslogtreecommitdiffstats
path: root/include
AgeCommit message (Collapse)Author
2014-04-19Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Unfortunately this contains no easter eggs, its a bit larger than I'd like, but I included a patch that just moves code from one file to another and I'd like to avoid merge conflicts with that later, so it makes it seem worse than it is, Otherwise: - radeon: fixes to use new microcode to stabilise some cards, use some common displayport code, some runtime pm fixes, pll regression fixes - i915: fix for some context oopses, a warn in a used path, backlight fixes - nouveau: regression fix - omap: a bunch of fixes" * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (51 commits) drm: bochs: drop unused struct fields drm: bochs: add power management support drm: cirrus: add power management support drm: Split out drm_probe_helper.c from drm_crtc_helper.c drm/plane-helper: Don't fake-implement primary plane disabling drm/ast: fix value check in cbr_scan2 drm/nouveau/bios: fix a bit shift error introduced by 457e77b drm/radeon/ci: make sure mc ucode is loaded before checking the size drm/radeon/si: make sure mc ucode is loaded before checking the size drm/radeon: improve PLL params if we don't match exactly v2 drm/radeon: memory leak on bo reservation failure. v2 drm/radeon: fix VCE fence command drm/radeon: re-enable mclk dpm on R7 260X asics drm/radeon: add support for newer mc ucode on CI (v2) drm/radeon: add support for newer mc ucode on SI (v2) drm/radeon: apply more strict limits for PLL params v2 drm/radeon: update CI DPM powertune settings drm/radeon: fix runpm handling on APUs (v4) drm/radeon: disable mclk dpm on R7 260X drm/tegra: Remove gratuitous pad field ...
2014-04-19Merge branch 'drm-next-3.15-wip' of ↵Dave Airlie
git://people.freedesktop.org/~deathsimple/linux into drm-next Some i2c fixes over DisplayPort. * 'drm-next-3.15-wip' of git://people.freedesktop.org/~deathsimple/linux: drm/radeon: Improve vramlimit module param documentation drm/radeon: fix audio pin counts for DCE6+ (v2) drm/radeon/dp: switch to the common i2c over aux code drm/dp/i2c: Update comments about common i2c over dp assumptions (v3) drm/dp/i2c: send bare addresses to properly reset i2c connections (v4) drm/radeon/dp: handle zero sized i2c over aux transactions (v2) drm/i915: support address only i2c-over-aux transactions drm/tegra: dp: Support address-only I2C-over-AUX transactions
2014-04-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull more networking fixes from David Miller: 1) Fix mlx4_en_netpoll implementation, it needs to schedule a NAPI context, not synchronize it. From Chris Mason. 2) Ipv4 flow input interface should never be zero, it should be LOOPBACK_IFINDEX instead. From Cong Wang and Julian Anastasov. 3) Properly configure MAC to PHY connection in mvneta devices, from Thomas Petazzoni. 4) sys_recv should use SYSCALL_DEFINE. From Jan Glauber. 5) Tunnel driver ioctls do not use the correct namespace, fix from Nicolas Dichtel. 6) Fix memory leak on seccomp filter attach, from Kees Cook. 7) Fix lockdep warning for nested vlans, from Ding Tianhong. 8) Crashes can happen in SCTP due to how the auth_enable value is managed, fix from Vlad Yasevich. 9) Wireless fixes from John W Linville and co. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (45 commits) net: sctp: cache auth_enable per endpoint tg3: update rx_jumbo_pending ring param only when jumbo frames are enabled vlan: Fix lockdep warning when vlan dev handle notification seccomp: fix memory leak on filter attach isdn: icn: buffer overflow in icn_command() ip6_tunnel: use the right netns in ioctl handler sit: use the right netns in ioctl handler ip_tunnel: use the right netns in ioctl handler net: use SYSCALL_DEFINEx for sys_recv net: mdio-gpio: Add support for separate MDI and MDO gpio pins net: mdio-gpio: Add support for active low gpio pins net: mdio-gpio: Use devm_ functions where possible ipv4, route: pass 0 instead of LOOPBACK_IFINDEX to fib_validate_source() ipv4, fib: pass LOOPBACK_IFINDEX instead of 0 to flowi4_iif mlx4_en: don't use napi_synchronize inside mlx4_en_netpoll net: mvneta: properly configure the MAC <-> PHY connection in all situations net: phy: add minimal support for QSGMII PHY sfc:On MCDI timeout, issue an FLR (and mark MCDI to fail-fast) mwifiex: fix hung task on command timeout mwifiex: process event before command response ...
2014-04-18Merge tag 'char-misc-3.15-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are a few driver fixes for char/misc drivers that resolve reported issues. All have been in linux-next successfully for a few days" * tag 'char-misc-3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: Drivers: hv: vmbus: Negotiate version 3.0 when running on ws2012r2 hosts Tools: hv: Handle the case when the target file exists correctly vme_tsi148: Utilize to_pci_dev() macro vme_tsi148: Fix PCI address mapping assumption vme_tsi148: Fix typo in tsi148_slave_get() w1: avoid recursive device_add w1: fix netlink refcnt leak on error path misc: Grammar s/addition/additional/ drivers: mcb: fix memory leak in chameleon_parse_cells() error path mei: ignore client writing state during cb completion mei: me: do not load the driver if the FW doesn't support MEI interface GenWQE: Increase driver version number GenWQE: Fix multithreading problems GenWQE: Ensure rc is not returning an uninitialized value GenWQE: Add wmb before DDCB is started GenWQE: Enable access to VPD flash area
2014-04-18Merge tag 'driver-core-3.15-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are some driver core fixes for 3.15-rc2. Also in here are some documentation updates, as well as an API removal that had to wait for after -rc1 due to the cleanups coming into you from multiple developer trees (this one and the PPC tree.) All have been in linux next successfully" * tag 'driver-core-3.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: drivers/base/dd.c incorrect pr_debug() parameters Documentation: Update stable address in Chinese and Japanese translations topology: Fix compilation warning when not in SMP Chinese: add translation of io_ordering.txt stable_kernel_rules: spelling/word usage sysfs, driver-core: remove unused {sysfs|device}_schedule_callback_owner() kernfs: protect lazy kernfs_iattrs allocation with mutex fs: Don't return 0 from get_anon_bdev
2014-04-18Merge branch 'akpm' (incoming from Andrew)Linus Torvalds
Merge misc fixes from Andrew Morton: "13 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: thp: close race between split and zap huge pages mm: fix new kernel-doc warning in filemap.c mm: fix CONFIG_DEBUG_VM_RB description mm: use paravirt friendly ops for NUMA hinting ptes mips: export flush_icache_range mm/hugetlb.c: add cond_resched_lock() in return_unused_surplus_pages() wait: explain the shadowing and type inconsistencies Shiraz has moved Documentation/vm/numa_memory_policy.txt: fix wrong document in numa_memory_policy.txt powerpc/mm: fix ".__node_distance" undefined kernel/watchdog.c:touch_softlockup_watchdog(): use raw_cpu_write() init/Kconfig: move the trusted keyring config option to general setup vmscan: reclaim_clean_pages_from_list() must use mod_zone_page_state()
2014-04-18mm: use paravirt friendly ops for NUMA hinting ptesMel Gorman
David Vrabel identified a regression when using automatic NUMA balancing under Xen whereby page table entries were getting corrupted due to the use of native PTE operations. Quoting him Xen PV guest page tables require that their entries use machine addresses if the preset bit (_PAGE_PRESENT) is set, and (for successful migration) non-present PTEs must use pseudo-physical addresses. This is because on migration MFNs in present PTEs are translated to PFNs (canonicalised) so they may be translated back to the new MFN in the destination domain (uncanonicalised). pte_mknonnuma(), pmd_mknonnuma(), pte_mknuma() and pmd_mknuma() set and clear the _PAGE_PRESENT bit using pte_set_flags(), pte_clear_flags(), etc. In a Xen PV guest, these functions must translate MFNs to PFNs when clearing _PAGE_PRESENT and translate PFNs to MFNs when setting _PAGE_PRESENT. His suggested fix converted p[te|md]_[set|clear]_flags to using paravirt-friendly ops but this is overkill. He suggested an alternative of using p[te|md]_modify in the NUMA page table operations but this is does more work than necessary and would require looking up a VMA for protections. This patch modifies the NUMA page table operations to use paravirt friendly operations to set/clear the flags of interest. Unfortunately this will take a performance hit when updating the PTEs on CONFIG_PARAVIRT but I do not see a way around it that does not break Xen. Signed-off-by: Mel Gorman <mgorman@suse.de> Acked-by: David Vrabel <david.vrabel@citrix.com> Tested-by: David Vrabel <david.vrabel@citrix.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Anvin <hpa@zytor.com> Cc: Fengguang Wu <fengguang.wu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Steven Noonan <steven@uplinklabs.net> Cc: Rik van Riel <riel@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Cyrill Gorcunov <gorcunov@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18wait: explain the shadowing and type inconsistenciesPeter Zijlstra
Stick in a comment before someone else tries to fix the sparse warning this generates. Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-o2ro6f3vkxklni0bc8f7m68s@git.kernel.org Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18Shiraz has movedViresh Kumar
shiraz.hashim@st.com email-id doesn't exist anymore as he has left the company. Replace ST's id with shiraz.linux.kernel@gmail.com. It also updates .mailmap file to fix address for 'git shortlog'. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: Shiraz Hashim <shiraz.linux.kernel@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-18net: sctp: cache auth_enable per endpointVlad Yasevich
Currently, it is possible to create an SCTP socket, then switch auth_enable via sysctl setting to 1 and crash the system on connect: Oops[#1]: CPU: 0 PID: 0 Comm: swapper Not tainted 3.14.1-mipsgit-20140415 #1 task: ffffffff8056ce80 ti: ffffffff8055c000 task.ti: ffffffff8055c000 [...] Call Trace: [<ffffffff8043c4e8>] sctp_auth_asoc_set_default_hmac+0x68/0x80 [<ffffffff8042b300>] sctp_process_init+0x5e0/0x8a4 [<ffffffff8042188c>] sctp_sf_do_5_1B_init+0x234/0x34c [<ffffffff804228c8>] sctp_do_sm+0xb4/0x1e8 [<ffffffff80425a08>] sctp_endpoint_bh_rcv+0x1c4/0x214 [<ffffffff8043af68>] sctp_rcv+0x588/0x630 [<ffffffff8043e8e8>] sctp6_rcv+0x10/0x24 [<ffffffff803acb50>] ip6_input+0x2c0/0x440 [<ffffffff8030fc00>] __netif_receive_skb_core+0x4a8/0x564 [<ffffffff80310650>] process_backlog+0xb4/0x18c [<ffffffff80313cbc>] net_rx_action+0x12c/0x210 [<ffffffff80034254>] __do_softirq+0x17c/0x2ac [<ffffffff800345e0>] irq_exit+0x54/0xb0 [<ffffffff800075a4>] ret_from_irq+0x0/0x4 [<ffffffff800090ec>] rm7k_wait_irqoff+0x24/0x48 [<ffffffff8005e388>] cpu_startup_entry+0xc0/0x148 [<ffffffff805a88b0>] start_kernel+0x37c/0x398 Code: dd0900b8 000330f8 0126302d <dcc60000> 50c0fff1 0047182a a48306a0 03e00008 00000000 ---[ end trace b530b0551467f2fd ]--- Kernel panic - not syncing: Fatal exception in interrupt What happens while auth_enable=0 in that case is, that ep->auth_hmacs is initialized to NULL in sctp_auth_init_hmacs() when endpoint is being created. After that point, if an admin switches over to auth_enable=1, the machine can crash due to NULL pointer dereference during reception of an INIT chunk. When we enter sctp_process_init() via sctp_sf_do_5_1B_init() in order to respond to an INIT chunk, the INIT verification succeeds and while we walk and process all INIT params via sctp_process_param() we find that net->sctp.auth_enable is set, therefore do not fall through, but invoke sctp_auth_asoc_set_default_hmac() instead, and thus, dereference what we have set to NULL during endpoint initialization phase. The fix is to make auth_enable immutable by caching its value during endpoint initialization, so that its original value is being carried along until destruction. The bug seems to originate from the very first days. Fix in joint work with Daniel Borkmann. Reported-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Tested-by: Joshua Kinard <kumba@gentoo.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-18Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband/rdma updates from Roland Dreier: - mostly cxgb4 fixes unblocked by the merge of some prerequisites via the net tree - drop deprecated MSI-X API use. - a couple other miscellaneous things. * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cxgb4: Fix over-dereference when terminating RDMA/cxgb4: Use uninitialized_var() RDMA/cxgb4: Add missing debug stats RDMA/cxgb4: Initialize reserved fields in a FW work request RDMA/cxgb4: Use pr_warn_ratelimited RDMA/cxgb4: Max fastreg depth depends on DSGL support RDMA/cxgb4: SQ flush fix RDMA/cxgb4: rmb() after reading valid gen bit RDMA/cxgb4: Endpoint timeout fixes RDMA/cxgb4: Use the BAR2/WC path for kernel QPs and T5 devices IB/mlx5: Add block multicast loopback support IB/mthca: Use pci_enable_msix_exact() instead of pci_enable_msix() IB/qib: Use pci_enable_msix_range() instead of pci_enable_msix()
2014-04-18Merge tag 'dt-fixes-for-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - fix error handling in of_update_property - fix section mismatch warnings in __reserved_mem_check_root - add empty of_find_node_by_path for !OF builds - add various missing binding documentation * tag 'dt-fixes-for-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: of: add empty of_find_node_by_path() for !OF of: Clean up of_update_property DT: add vendor prefix for EBV Elektronik of: Fix the section mismatch warnings. of: Add vendor prefix for Digi International Inc. DT: I2C: Add trivial bindings used by kirkwood boards DT: Vendor: Add prefixes used by Kirkwood devices DT: bindings: add missing Marvell Kirkwood SoC documentation dt-bindings: add vendor-prefix for Newhaven Display of: add vendor prefix for I2SE GmbH of: add vendor prefix for ISEE 2007 S.L.
2014-04-18of: add empty of_find_node_by_path() for !OFAlexander Shiyan
Add an empty version of of_find_node_by_path(). This fixes following build error for asoc tree: sound/soc/fsl/fsl_ssi.c: In function 'fsl_ssi_probe': sound/soc/fsl/fsl_ssi.c:1471:2: error: implicit declaration of function 'of_find_node_by_path' [-Werror=implicit-function-declaration] sprop = of_get_property(of_find_node_by_path("/"), "compatible", NULL); Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Alexander Shiyan <shc_work@mail.ru> Signed-off-by: Rob Herring <robh@kernel.org>
2014-04-18drm: Split out drm_probe_helper.c from drm_crtc_helper.cDaniel Vetter
This is leftover stuff from my previous doc round which I kinda wanted to do but didn't yet due to rebase hell. The modeset helpers and the probing helpers a independent and e.g. i915 uses the probing stuff but has its own modeset infrastructure. It hence makes to split this up. While at it add a DOC: comment for the probing libraray. It would be rather neat to pull some of the DocBook documenting these two helpers into in-line DOC: comments. But unfortunately kerneldoc doesn't support markdown or something similar to make nice-looking documentation, so the current state is better. Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2014-04-17Merge branch 'ipmi' (emailed ipmi fixes)Linus Torvalds
Merge ipmi fixes from Corey Minyard: "Things collected since last kernel release. Some of these are pretty important. The first three are bug fixes. The next two are to hopefully make everyone happy about allowing ACPI to be on all the time and not have IPMI have an effect on the system when not in use. The last is a little cleanup" * emailed patches from Corey Minyard <cminyard@mvista.com>: ipmi: boolify some things ipmi: Turn off all activity on an idle ipmi interface ipmi: Turn off default probing of interfaces ipmi: Reset the KCS timeout when starting error recovery ipmi: Fix a race restarting the timer Char: ipmi_bt_sm, fix infinite loop
2014-04-17ipmi: boolify some thingsCorey Minyard
Convert some ints to bools. Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-17ipmi: Turn off all activity on an idle ipmi interfaceCorey Minyard
The IPMI driver would wake up periodically looking for events and watchdog pretimeouts. If there is nothing waiting for these events, it's really kind of pointless to be checking for them. So modify the driver so the message handler can pass down if it needs the lower layer to be waiting for these. Modify the system interface lower layer to turn off all timer and thread activity if the upper layer doesn't need anything and it is not currently handling messages. And modify the message handler to not restart the timer if its timer is not needed. The timers and kthread will still be enabled if: - the SI interface is handling a message. - a user has enabled watching for events. - the IPMI watchdog timer is in use (since it uses pretimeouts). - the message handler is waiting on a remote response. - a user has registered to receive commands. This mostly affects interfaces without interrupts. Interfaces with interrupts already don't use CPU in the system interface when the interface is idle. Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-04-16Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Various fixes: - reboot regression fix - build message spam fix - GPU quirk fix - 'make kvmconfig' fix plus the wire-up of the renameat2() system call on i386" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Remove the PCI reboot method from the default chain x86/build: Supress "Nothing to be done for ..." messages x86/gpu: Fix sign extension issue in Intel graphics stolen memory quirks x86/platform: Fix "make O=dir kvmconfig" i386: Wire up the renameat2() syscall
2014-04-16Drivers: hv: vmbus: Negotiate version 3.0 when running on ws2012r2 hostsK. Y. Srinivasan
Only ws2012r2 hosts support the ability to reconnect to the host on VMBUS. This functionality is needed by kexec in Linux. To use this functionality we need to negotiate version 3.0 of the VMBUS protocol. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: <stable@vger.kernel.org> [3.9+] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16Tools: hv: Handle the case when the target file exists correctlyK. Y. Srinivasan
Return the appropriate error code and handle the case when the target file exists correctly. This fixes a bug. Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Cc: <stable@vger.kernel.org> [3.14] Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16net: mdio-gpio: Add support for separate MDI and MDO gpio pinsGuenter Roeck
This is for a system with fixed assignments of input and output pins (various variants of Kontron COMe). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-16net: mdio-gpio: Add support for active low gpio pinsGuenter Roeck
Some systems using mdio-gpio may use active-low gpio pins (eg with inverters or FETs connected to all or some of the gpio pins). Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-16ipv4, fib: pass LOOPBACK_IFINDEX instead of 0 to flowi4_iifCong Wang
As suggested by Julian: Simply, flowi4_iif must not contain 0, it does not look logical to ignore all ip rules with specified iif. because in fib_rule_match() we do: if (rule->iifindex && (rule->iifindex != fl->flowi_iif)) goto out; flowi4_iif should be LOOPBACK_IFINDEX by default. We need to move LOOPBACK_IFINDEX to include/net/flow.h: 1) It is mostly used by flowi_iif 2) Fix the following compile error if we use it in flow.h by the patches latter: In file included from include/linux/netfilter.h:277:0, from include/net/netns/netfilter.h:5, from include/net/net_namespace.h:21, from include/linux/netdevice.h:43, from include/linux/icmpv6.h:12, from include/linux/ipv6.h:61, from include/net/ipv6.h:16, from include/linux/sunrpc/clnt.h:27, from include/linux/nfs_fs.h:30, from init/do_mounts.c:32: include/net/flow.h: In function ‘flowi4_init_output’: include/net/flow.h:84:32: error: ‘LOOPBACK_IFINDEX’ undeclared (first use in this function) Cc: Eric Biederman <ebiederm@xmission.com> Cc: Julian Anastasov <ja@ssi.bg> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Cong Wang <cwang@twopensource.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-16sysfs, driver-core: remove unused {sysfs|device}_schedule_callback_owner()Tejun Heo
All device_schedule_callback_owner() users are converted to use device_remove_file_self(). Remove now unused {sysfs|device}_schedule_callback_owner(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-04-16net: phy: add minimal support for QSGMII PHYThomas Petazzoni
This commit adds the necessary definitions for the PHY layer to recognize "qsgmii" as a valid PHY interface. A QSMII interface, as defined at http://en.wikipedia.org/wiki/Media_Independent_Interface#Quad_Serial_Gigabit_Media_Independent_Interface, is "is a method of combining four SGMII lines into a 5Gbit/s interface. QSGMII, like SGMII, uses LVDS signalling for the TX and RX data and a single LVDS clock signal. QSGMII uses significantly fewer signal lines than four SGMII busses." This type of MAC <-> PHY connection might require special handling on the MAC driver side, so it should be possible to express this type of MAC <-> PHY connection, for example in the Device Tree. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: devicetree@vger.kernel.org Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-16drm/tegra: Remove gratuitous pad fieldThierry Reding
The version of the drm_tegra_submit structure that was merged all the way back in 3.10 contains a pad field that was originally intended to properly pad the following __u64 field. Unfortunately it seems like a different field was dropped during review that caused this padding to become unnecessary, but the pad field wasn't removed at that time. One possible side-effect of this is that since the __u64 following the pad is now no longer properly aligned, the compiler may (or may not) introduce padding itself, which results in no predictable ABI. Rectify this by removing the pad field so that all fields are again naturally aligned. Technically this is breaking existing userspace ABI, but given that there aren't any (released) userspace drivers that make use of this yet, the fallout should be minimal. Fixes: d43f81cbaf43 ("drm/tegra: Add gr2d device") Cc: <stable@vger.kernel.org> # 3.10 Signed-off-by: Thierry Reding <treding@nvidia.com>
2014-04-16x86: Remove the PCI reboot method from the default chainIngo Molnar
Steve reported a reboot hang and bisected it back to this commit: a4f1987e4c54 x86, reboot: Add EFI and CF9 reboot methods into the default list He heroically tested all reboot methods and found the following: reboot=t # triple fault ok reboot=k # keyboard ctrl FAIL reboot=b # BIOS ok reboot=a # ACPI FAIL reboot=e # EFI FAIL [system has no EFI] reboot=p # PCI 0xcf9 FAIL And I think it's pretty obvious that we should only try PCI 0xcf9 as a last resort - if at all. The other observation is that (on this box) we should never try the PCI reboot method, but close with either the 'triple fault' or the 'BIOS' (terminal!) reboot methods. Thirdly, CF9_COND is a total misnomer - it should be something like CF9_SAFE or CF9_CAREFUL, and 'CF9' should be 'CF9_FORCE' ... So this patch fixes the worst problems: - it orders the actual reboot logic to follow the reboot ordering pattern - it was in a pretty random order before for no good reason. - it fixes the CF9 misnomers and uses BOOT_CF9_FORCE and BOOT_CF9_SAFE flags to make the code more obvious. - it tries the BIOS reboot method before the PCI reboot method. (Since 'BIOS' is a terminal reboot method resulting in a hang if it does not work, this is essentially equivalent to removing the PCI reboot method from the default reboot chain.) - just for the miraculous possibility of terminal (resulting in hang) reboot methods of triple fault or BIOS returning without having done their job, there's an ordering between them as well. Reported-and-bisected-and-tested-by: Steven Rostedt <rostedt@goodmis.org> Cc: Li Aubrey <aubrey.li@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Link: http://lkml.kernel.org/r/20140404064120.GB11877@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-04-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix BPF filter validation of netlink attribute accesses, from Mathias Kruase. 2) Netfilter conntrack generation seqcount not initialized properly, from Andrey Vagin. 3) Fix comparison mask computation on big-endian in nft_cmp_fast(), from Patrick McHardy. 4) Properly limit MTU over ipv6, from Eric Dumazet. 5) Fix seccomp system call argument population on 32-bit, from Daniel Borkmann. 6) skb_network_protocol() should not use hard-coded ETH_HLEN, instead skb->mac_len needs to be used. From Vlad Yasevich. 7) We have several cases of using socket based communications to implement a tunnel. For example, some tunnels are encapsulations over UDP so we use an internal kernel UDP socket to do the transmits. These tunnels should behave just like other software devices and pass the packets on down to the next layer. Most importantly we want the top-level socket (eg TCP) that created the traffic to be charged for the SKB memory. However, once you get into the IP output path, we have code that assumed that whatever was attached to skb->sk is an IP socket. To keep the top-level socket being charged for the SKB memory, whilst satisfying the needs of the IP output path, we now pass in an explicit 'sk' argument. From Eric Dumazet. 8) ping_init_sock() leaks group info, from Xiaoming Wang. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (33 commits) cxgb4: use the correct max size for firmware flash qlcnic: Fix MSI-X initialization code ip6_gre: don't allow to remove the fb_tunnel_dev ipv4: add a sock pointer to dst->output() path. ipv4: add a sock pointer to ip_queue_xmit() driver/net: cosa driver uses udelay incorrectly at86rf230: fix __at86rf230_read_subreg function at86rf230: remove check if AVDD settled net: cadence: Add architecture dependencies net: Start with correct mac_len in skb_network_protocol Revert "net: sctp: Fix a_rwnd/rwnd management to reflect real state of the receiver's buffer" cxgb4: Save the correct mac addr for hw-loopback connections in the L2T net: filter: seccomp: fix wrong decoding of BPF_S_ANC_SECCOMP_LD_W seccomp: fix populating a0-a5 syscall args in 32-bit x86 BPF qlcnic: Do not disable SR-IOV when VFs are assigned to VMs qlcnic: Fix QLogic application/driver interface for virtual NIC configuration qlcnic: Fix PVID configuration on eSwitch port. qlcnic: Fix max ring count calculation qlcnic: Fix to send INIT_NIC_FUNC as first mailbox. qlcnic: Fix panic due to uninitialzed delayed_work struct in use. ...
2014-04-15ipv4: add a sock pointer to dst->output() path.Eric Dumazet
In the dst->output() path for ipv4, the code assumes the skb it has to transmit is attached to an inet socket, specifically via ip_mc_output() : The sk_mc_loop() test triggers a WARN_ON() when the provider of the packet is an AF_PACKET socket. The dst->output() method gets an additional 'struct sock *sk' parameter. This needs a cascade of changes so that this parameter can be propagated from vxlan to final consumer. Fixes: 8f646c922d55 ("vxlan: keep original skb ownership") Reported-by: lucien xin <lucien.xin@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-15ipv4: add a sock pointer to ip_queue_xmit()Eric Dumazet
ip_queue_xmit() assumes the skb it has to transmit is attached to an inet socket. Commit 31c70d5956fc ("l2tp: keep original skb ownership") changed l2tp to not change skb ownership and thus broke this assumption. One fix is to add a new 'struct sock *sk' parameter to ip_queue_xmit(), so that we do not assume skb->sk points to the socket used by l2tp tunnel. Fixes: 31c70d5956fc ("l2tp: keep original skb ownership") Reported-by: Zhan Jianyu <nasa4836@gmail.com> Tested-by: Zhan Jianyu <nasa4836@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains three Netfilter fixes for your net tree, they are: * Fix missing generation sequence initialization which results in a splat if lockdep is enabled, it was introduced in the recent works to improve nf_conntrack scalability, from Andrey Vagin. * Don't flush the GRE keymap list in nf_conntrack when the pptp helper is disabled otherwise this crashes due to a double release, from Andrey Vagin. * Fix nf_tables cmp fast in big endian, from Patrick McHardy. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-14Revert "net: sctp: Fix a_rwnd/rwnd management to reflect real state of the ↵Daniel Borkmann
receiver's buffer" This reverts commit ef2820a735f7 ("net: sctp: Fix a_rwnd/rwnd management to reflect real state of the receiver's buffer") as it introduced a serious performance regression on SCTP over IPv4 and IPv6, though a not as dramatic on the latter. Measurements are on 10Gbit/s with ixgbe NICs. Current state: [root@Lab200slot2 ~]# iperf3 --sctp -4 -c 192.168.241.3 -V -l 1452 -t 60 iperf version 3.0.1 (10 January 2014) Linux Lab200slot2 3.14.0 #1 SMP Thu Apr 3 23:18:29 EDT 2014 x86_64 Time: Fri, 11 Apr 2014 17:56:21 GMT Connecting to host 192.168.241.3, port 5201 Cookie: Lab200slot2.1397238981.812898.548918 [ 4] local 192.168.241.2 port 38616 connected to 192.168.241.3 port 5201 Starting Test: protocol: SCTP, 1 streams, 1452 byte blocks, omitting 0 seconds, 60 second test [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.09 sec 20.8 MBytes 161 Mbits/sec [ 4] 1.09-2.13 sec 10.8 MBytes 86.8 Mbits/sec [ 4] 2.13-3.15 sec 3.57 MBytes 29.5 Mbits/sec [ 4] 3.15-4.16 sec 4.33 MBytes 35.7 Mbits/sec [ 4] 4.16-6.21 sec 10.4 MBytes 42.7 Mbits/sec [ 4] 6.21-6.21 sec 0.00 Bytes 0.00 bits/sec [ 4] 6.21-7.35 sec 34.6 MBytes 253 Mbits/sec [ 4] 7.35-11.45 sec 22.0 MBytes 45.0 Mbits/sec [ 4] 11.45-11.45 sec 0.00 Bytes 0.00 bits/sec [ 4] 11.45-11.45 sec 0.00 Bytes 0.00 bits/sec [ 4] 11.45-11.45 sec 0.00 Bytes 0.00 bits/sec [ 4] 11.45-12.51 sec 16.0 MBytes 126 Mbits/sec [ 4] 12.51-13.59 sec 20.3 MBytes 158 Mbits/sec [ 4] 13.59-14.65 sec 13.4 MBytes 107 Mbits/sec [ 4] 14.65-16.79 sec 33.3 MBytes 130 Mbits/sec [ 4] 16.79-16.79 sec 0.00 Bytes 0.00 bits/sec [ 4] 16.79-17.82 sec 5.94 MBytes 48.7 Mbits/sec (etc) [root@Lab200slot2 ~]# iperf3 --sctp -6 -c 2001:db8:0:f101::1 -V -l 1400 -t 60 iperf version 3.0.1 (10 January 2014) Linux Lab200slot2 3.14.0 #1 SMP Thu Apr 3 23:18:29 EDT 2014 x86_64 Time: Fri, 11 Apr 2014 19:08:41 GMT Connecting to host 2001:db8:0:f101::1, port 5201 Cookie: Lab200slot2.1397243321.714295.2b3f7c [ 4] local 2001:db8:0:f101::2 port 55804 connected to 2001:db8:0:f101::1 port 5201 Starting Test: protocol: SCTP, 1 streams, 1400 byte blocks, omitting 0 seconds, 60 second test [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00 sec 169 MBytes 1.42 Gbits/sec [ 4] 1.00-2.00 sec 201 MBytes 1.69 Gbits/sec [ 4] 2.00-3.00 sec 188 MBytes 1.58 Gbits/sec [ 4] 3.00-4.00 sec 174 MBytes 1.46 Gbits/sec [ 4] 4.00-5.00 sec 165 MBytes 1.39 Gbits/sec [ 4] 5.00-6.00 sec 199 MBytes 1.67 Gbits/sec [ 4] 6.00-7.00 sec 163 MBytes 1.36 Gbits/sec [ 4] 7.00-8.00 sec 174 MBytes 1.46 Gbits/sec [ 4] 8.00-9.00 sec 193 MBytes 1.62 Gbits/sec [ 4] 9.00-10.00 sec 196 MBytes 1.65 Gbits/sec [ 4] 10.00-11.00 sec 157 MBytes 1.31 Gbits/sec [ 4] 11.00-12.00 sec 175 MBytes 1.47 Gbits/sec [ 4] 12.00-13.00 sec 192 MBytes 1.61 Gbits/sec [ 4] 13.00-14.00 sec 199 MBytes 1.67 Gbits/sec (etc) After patch: [root@Lab200slot2 ~]# iperf3 --sctp -4 -c 192.168.240.3 -V -l 1452 -t 60 iperf version 3.0.1 (10 January 2014) Linux Lab200slot2 3.14.0+ #1 SMP Mon Apr 14 12:06:40 EDT 2014 x86_64 Time: Mon, 14 Apr 2014 16:40:48 GMT Connecting to host 192.168.240.3, port 5201 Cookie: Lab200slot2.1397493648.413274.65e131 [ 4] local 192.168.240.2 port 50548 connected to 192.168.240.3 port 5201 Starting Test: protocol: SCTP, 1 streams, 1452 byte blocks, omitting 0 seconds, 60 second test [ ID] Interval Transfer Bandwidth [ 4] 0.00-1.00 sec 240 MBytes 2.02 Gbits/sec [ 4] 1.00-2.00 sec 239 MBytes 2.01 Gbits/sec [ 4] 2.00-3.00 sec 240 MBytes 2.01 Gbits/sec [ 4] 3.00-4.00 sec 239 MBytes 2.00 Gbits/sec [ 4] 4.00-5.00 sec 245 MBytes 2.05 Gbits/sec [ 4] 5.00-6.00 sec 240 MBytes 2.01 Gbits/sec [ 4] 6.00-7.00 sec 240 MBytes 2.02 Gbits/sec [ 4] 7.00-8.00 sec 239 MBytes 2.01 Gbits/sec With the reverted patch applied, the SCTP/IPv4 performance is back to normal on latest upstream for IPv4 and IPv6 and has same throughput as 3.4.2 test kernel, steady and interval reports are smooth again. Fixes: ef2820a735f7 ("net: sctp: Fix a_rwnd/rwnd management to reflect real state of the receiver's buffer") Reported-by: Peter Butler <pbutler@sonusnet.com> Reported-by: Dongsheng Song <dongsheng.song@gmail.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Tested-by: Peter Butler <pbutler@sonusnet.com> Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Cc: Matija Glavinic Pecotic <matija.glavinic-pecotic.ext@nsn.com> Cc: Alexander Sverdlin <alexander.sverdlin@nsn.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Acked-by: Vlad Yasevich <vyasevich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-14net: filter: seccomp: fix wrong decoding of BPF_S_ANC_SECCOMP_LD_WDaniel Borkmann
While reviewing seccomp code, we found that BPF_S_ANC_SECCOMP_LD_W has been wrongly decoded by commit a8fc927780 ("sk-filter: Add ability to get socket filter program (v2)") into the opcode BPF_LD|BPF_B|BPF_ABS although it should have been decoded as BPF_LD|BPF_W|BPF_ABS. In practice, this should not have much side-effect though, as such conversion is/was being done through prctl(2) PR_SET_SECCOMP. Reverse operation PR_GET_SECCOMP will only return the current seccomp mode, but not the filter itself. Since the transition to the new BPF infrastructure, it's also not used anymore, so we can simply remove this as it's unreachable. Fixes: a8fc927780 ("sk-filter: Add ability to get socket filter program (v2)") Signed-off-by: Daniel Borkmann <dborkman@redhat.com> Signed-off-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Pavel Emelyanov <xemul@parallels.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-14ipv6: Limit mtu to 65575 bytesEric Dumazet
Francois reported that setting big mtu on loopback device could prevent tcp sessions making progress. We do not support (yet ?) IPv6 Jumbograms and cook corrupted packets. We must limit the IPv6 MTU to (65535 + 40) bytes in theory. Tested: ifconfig lo mtu 70000 netperf -H ::1 Before patch : Throughput : 0.05 Mbits After patch : Throughput : 35484 Mbits Reported-by: Francois WELLENREITER <f.wellenreiter@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Acked-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-14netfilter: nf_tables: fix nft_cmp_fast failure on big endian for size < 4Patrick McHardy
nft_cmp_fast is used for equality comparisions of size <= 4. For comparisions of size < 4 byte a mask is calculated that is applied to both the data from userspace (during initialization) and the register value (during runtime). Both values are stored using (in effect) memcpy to a memory area that is then interpreted as u32 by nft_cmp_fast. This works fine on little endian since smaller types have the same base address, however on big endian this is not true and the smaller types are interpreted as a big number with trailing zero bytes. The mask therefore must not include the lower bytes, but the higher bytes on big endian. Add a helper function that does a cpu_to_le32 to switch the bytes on big endian. Since we're dealing with a mask of just consequitive bits, this works out fine. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2014-04-13Merge branch 'slab/next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux Pull slab changes from Pekka Enberg: "The biggest change is byte-sized freelist indices which reduces slab freelist memory usage: https://lkml.org/lkml/2013/12/2/64" * 'slab/next' of git://git.kernel.org/pub/scm/linux/kernel/git/penberg/linux: mm: slab/slub: use page->list consistently instead of page->lru mm/slab.c: cleanup outdated comments and unify variables naming slab: fix wrongly used macro slub: fix high order page allocation problem with __GFP_NOFAIL slab: Make allocations with GFP_ZERO slightly more efficient slab: make more slab management structure off the slab slab: introduce byte sized index for the freelist of a slab slab: restrict the number of objects in a slab slab: introduce helper functions to get/set free object slab: factor out calculate nr objects in cache_estimate
2014-04-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull yet more networking updates from David Miller: 1) Various fixes to the new Redpine Signals wireless driver, from Fariya Fatima. 2) L2TP PPP connect code takes PMTU from the wrong socket, fix from Dmitry Petukhov. 3) UFO and TSO packets differ in whether they include the protocol header in gso_size, account for that in skb_gso_transport_seglen(). From Florian Westphal. 4) If VLAN untagging fails, we double free the SKB in the bridging output path. From Toshiaki Makita. 5) Several call sites of sk->sk_data_ready() were referencing an SKB just added to the socket receive queue in order to calculate the second argument via skb->len. This is dangerous because the moment the skb is added to the receive queue it can be consumed in another context and freed up. It turns out also that none of the sk->sk_data_ready() implementations even care about this second argument. So just kill it off and thus fix all these use-after-free bugs as a side effect. 6) Fix inverted test in tcp_v6_send_response(), from Lorenzo Colitti. 7) pktgen needs to do locking properly for LLTX devices, from Daniel Borkmann. 8) xen-netfront driver initializes TX array entries in RX loop :-) From Vincenzo Maffione. 9) After refactoring, some tunnel drivers allow a tunnel to be configured on top itself. Fix from Nicolas Dichtel. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits) vti: don't allow to add the same tunnel twice gre: don't allow to add the same tunnel twice drivers: net: xen-netfront: fix array initialization bug pktgen: be friendly to LLTX devices r8152: check RTL8152_UNPLUG net: sun4i-emac: add promiscuous support net/apne: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO net: ipv6: Fix oif in TCP SYN+ACK route lookup. drivers: net: cpsw: enable interrupts after napi enable and clearing previous interrupts drivers: net: cpsw: discard all packets received when interface is down net: Fix use after free by removing length arg from sk_data_ready callbacks. Drivers: net: hyperv: Address UDP checksum issues Drivers: net: hyperv: Negotiate suitable ndis version for offload support Drivers: net: hyperv: Allocate memory for all possible per-pecket information bridge: Fix double free and memory leak around br_allowed_ingress bonding: Remove debug_fs files when module init fails i40evf: program RSS LUT correctly i40evf: remove open-coded skb_cow_head ixgb: remove open-coded skb_cow_head igbvf: remove open-coded skb_cow_head ...
2014-04-12Merge tag 'llvmlinux-for-v3.15' of ↵Linus Torvalds
git://git.linuxfoundation.org/llvmlinux/kernel Pull llvm patches from Behan Webster: "These are some initial updates to support compiling the kernel with clang. These patches have been through the proper reviews to the best of my ability, and have been soaking in linux-next for a few weeks. These patches by themselves still do not completely allow clang to be used with the kernel code, but lay the foundation for other patches which are still under review. Several other of the LLVMLinux patches have been already added via maintainer trees" * tag 'llvmlinux-for-v3.15' of git://git.linuxfoundation.org/llvmlinux/kernel: x86: LLVMLinux: Fix "incomplete type const struct x86cpu_device_id" x86 kbuild: LLVMLinux: More cc-options added for clang x86, acpi: LLVMLinux: Remove nested functions from Thinkpad ACPI LLVMLinux: Add support for clang to compiler.h and new compiler-clang.h LLVMLinux: Remove warning about returning an uninitialized variable kbuild: LLVMLinux: Fix LINUX_COMPILER definition script for compilation with clang Documentation: LLVMLinux: Update Documentation/dontdiff kbuild: LLVMLinux: Adapt warnings for compilation with clang kbuild: LLVMLinux: Add Kbuild support for building kernel with Clang
2014-04-12Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "Here are the target pending updates for v3.15-rc1. Apologies in advance for waiting until the second to last day of the merge window to send these out. The highlights this round include: - iser-target support for T10 PI (DIF) offloads (Sagi + Or) - Fix Task Aborted Status (TAS) handling in target-core (Alex Leung) - Pass in transport supported PI at session initialization (Sagi + MKP + nab) - Add WRITE_INSERT + READ_STRIP T10 PI support in target-core (nab + Sagi) - Fix iscsi-target ERL=2 ASYNC_EVENT connection pointer bug (nab) - Fix tcm_fc use-after-free of ft_tpg (Andy Grover) - Use correct ib_sg_dma primitives in ib_isert (Mike Marciniszyn) Also, note the virtio-scsi + vhost-scsi changes to expose T10 PI metadata into KVM guest have been left-out for now, as there where a few comments from MST + Paolo that where not able to be addressed in time for v3.15. Please expect this feature for v3.16-rc1" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (43 commits) ib_srpt: Use correct ib_sg_dma primitives target/tcm_fc: Rename ft_tport_create to ft_tport_get target/tcm_fc: Rename ft_{add,del}_lport to {add,del}_wwn target/tcm_fc: Rename structs and list members for clarity target/tcm_fc: Limit to 1 TPG per wwn target/tcm_fc: Don't export ft_lport_list target/tcm_fc: Fix use-after-free of ft_tpg target: Add check to prevent Abort Task from aborting itself target: Enable READ_STRIP emulation in target_complete_ok_work target/sbc: Add sbc_dif_read_strip software emulation target: Enable WRITE_INSERT emulation in target_execute_cmd target/sbc: Add sbc_dif_generate software emulation target/sbc: Only expose PI read_cap16 bits when supported by fabric target/spc: Only expose PI mode page bits when supported by fabric target/spc: Only expose PI inquiry bits when supported by fabric target: Pass in transport supported PI at session initialization target/iblock: Fix double bioset_integrity_free bug Target/sbc: Initialize COMPARE_AND_WRITE write_sg scatterlist target/rd: T10-Dif: RAM disk is allocating more space than required. iscsi-target: Fix ERL=2 ASYNC_EVENT connection pointer bug ...
2014-04-12Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "A series of bug fix patches for v3.15-rc1. Most are just driver fixes. There are some changes at remote controller core level, fixing some definitions on a new API added for Kernel v3.15. It also adds the missing include at include/uapi/linux/v4l2-common.h, to allow its compilation on userspace, as pointed by you" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (24 commits) [media] gpsca: remove the risk of a division by zero [media] stk1160: warrant a NUL terminated string [media] v4l: ti-vpe: retain v4l2_buffer flags for captured buffers [media] v4l: ti-vpe: Set correct field parameter for output and capture buffers [media] v4l: ti-vpe: zero out reserved fields in try_fmt [media] v4l: ti-vpe: Fix initial configuration queue data [media] v4l: ti-vpe: Use correct bus_info name for the device in querycap [media] v4l: ti-vpe: report correct capabilities in querycap [media] v4l: ti-vpe: Allow usage of smaller images [media] v4l: ti-vpe: Use video_device_release_empty [media] v4l: ti-vpe: Make sure in job_ready that we have the needed number of dst_bufs [media] lgdt3305: include sleep functionality in lgdt3304_ops [media] drx-j: use customise option correctly [media] m88rs2000: fix sparse static warnings [media] r820t: fix size and init values [media] rc-core: remove generic scancode filter [media] rc-core: split dev->s_filter [media] rc-core: do not change 32bit NEC scancode format for now [media] rtl28xxu: remove duplicate ID 0458:707f Genius TVGo DVB-T03 [media] xc2028: add missing break to switch ...
2014-04-12Merge tag 'ntb-3.15' of git://github.com/jonmason/ntbLinus Torvalds
Pull PCIe non-transparent bridge fixes and features from Jon Mason: "NTB driver bug fixes to address issues in list traversal, skb leak in ntb_netdev, a typo, and a leak of msix entries in the error path. Clean ups of the event handling logic, as well as a overall style cleanup. Finally, the driver was converted to use the new pci_enable_msix_range logic (and the refactoring to go along with it)" * tag 'ntb-3.15' of git://github.com/jonmason/ntb: ntb: Use pci_enable_msix_range() instead of pci_enable_msix() ntb: Split ntb_setup_msix() into separate BWD/SNB routines ntb: Use pci_msix_vec_count() to obtain number of MSI-Xs NTB: Code Style Clean-up NTB: client event cleanup ntb: Fix leakage of ntb_device::msix_entries[] array NTB: Fix typo in setting one translation register ntb_netdev: Fix skb free issue in open ntb_netdev: Fix list_for_each_entry exit issue
2014-04-12Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs updates from Al Viro: "The first vfs pile, with deep apologies for being very late in this window. Assorted cleanups and fixes, plus a large preparatory part of iov_iter work. There's a lot more of that, but it'll probably go into the next merge window - it *does* shape up nicely, removes a lot of boilerplate, gets rid of locking inconsistencie between aio_write and splice_write and I hope to get Kent's direct-io rewrite merged into the same queue, but some of the stuff after this point is having (mostly trivial) conflicts with the things already merged into mainline and with some I want more testing. This one passes LTP and xfstests without regressions, in addition to usual beating. BTW, readahead02 in ltp syscalls testsuite has started giving failures since "mm/readahead.c: fix readahead failure for memoryless NUMA nodes and limit readahead pages" - might be a false positive, might be a real regression..." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits) missing bits of "splice: fix racy pipe->buffers uses" cifs: fix the race in cifs_writev() ceph_sync_{,direct_}write: fix an oops on ceph_osdc_new_request() failure kill generic_file_buffered_write() ocfs2_file_aio_write(): switch to generic_perform_write() ceph_aio_write(): switch to generic_perform_write() xfs_file_buffered_aio_write(): switch to generic_perform_write() export generic_perform_write(), start getting rid of generic_file_buffer_write() generic_file_direct_write(): get rid of ppos argument btrfs_file_aio_write(): get rid of ppos kill the 5th argument of generic_file_buffered_write() kill the 4th argument of __generic_file_aio_write() lustre: don't open-code kernel_recvmsg() ocfs2: don't open-code kernel_recvmsg() drbd: don't open-code kernel_recvmsg() constify blk_rq_map_user_iov() and friends lustre: switch to kernel_sendmsg() ocfs2: don't open-code kernel_sendmsg() take iov_iter stuff to mm/iov_iter.c process_vm_access: tidy up a bit ...
2014-04-12Merge tag 'trace-3.15-v2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull more tracing updates from Steven Rostedt: "This includes the final patch to clean up and fix the issue with the design of tracepoints and how a user could register a tracepoint and have that tracepoint not be activated but no error was shown. The design was for an out of tree module but broke in tree users. The clean up was to remove the saving of the hash table of tracepoint names such that they can be enabled before they exist (enabling a module tracepoint before that module is loaded). This added more complexity than needed. The clean up was to remove that code and just enable tracepoints that exist or fail if they do not. This removed a lot of code as well as the complexity that it brought. As a side effect, instead of registering a tracepoint by its name, the tracepoint needs to be registered with the tracepoint descriptor. This removes having to duplicate the tracepoint names that are enabled. The second patch was added that simplified the way modules were searched for. This cleanup required changes that were in the 3.15 queue as well as some changes that were added late in the 3.14-rc cycle. This final change waited till the two were merged in upstream and then the change was added and full tests were run. Unfortunately, the test found some errors, but after it was already submitted to the for-next branch and not to be rebased. Sparse errors were detected by Fengguang Wu's bot tests, and my internal tests discovered that the anonymous union initialization triggered a bug in older gcc compilers. Luckily, there was a bugzilla for the gcc bug which gave a work around to the problem. The third and fourth patch handled the sparse error and the gcc bug respectively. A final patch was tagged along to fix a missing documentation for the README file" * tag 'trace-3.15-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: tracing: Add missing function triggers dump and cpudump to README tracing: Fix anonymous unions in struct ftrace_event_call tracepoint: Fix sparse warnings in tracepoint.c tracepoint: Simplify tracepoint module search tracepoint: Use struct pointer instead of name hash for reg/unreg tracepoints
2014-04-12Merge git://git.infradead.org/users/eparis/auditLinus Torvalds
Pull audit updates from Eric Paris. * git://git.infradead.org/users/eparis/audit: (28 commits) AUDIT: make audit_is_compat depend on CONFIG_AUDIT_COMPAT_GENERIC audit: renumber AUDIT_FEATURE_CHANGE into the 1300 range audit: do not cast audit_rule_data pointers pointlesly AUDIT: Allow login in non-init namespaces audit: define audit_is_compat in kernel internal header kernel: Use RCU_INIT_POINTER(x, NULL) in audit.c sched: declare pid_alive as inline audit: use uapi/linux/audit.h for AUDIT_ARCH declarations syscall_get_arch: remove useless function arguments audit: remove stray newline from audit_log_execve_info() audit_panic() call audit: remove stray newlines from audit_log_lost messages audit: include subject in login records audit: remove superfluous new- prefix in AUDIT_LOGIN messages audit: allow user processes to log from another PID namespace audit: anchor all pid references in the initial pid namespace audit: convert PPIDs to the inital PID namespace. pid: get pid_t ppid of task in init_pid_ns audit: rename the misleading audit_get_context() to audit_take_context() audit: Add generic compat syscall support audit: Add CONFIG_HAVE_ARCH_AUDITSYSCALL ...
2014-04-11Merge git://git.infradead.org/users/willy/linux-nvmeLinus Torvalds
Pull NVMe driver updates from Matthew Wilcox: "Various updates to the NVMe driver. The most user-visible change is that drive hotplugging now works and CPU hotplug while an NVMe drive is installed should also work better" * git://git.infradead.org/users/willy/linux-nvme: NVMe: Retry failed commands with non-fatal errors NVMe: Add getgeo to block ops NVMe: Start-stop nvme_thread during device add-remove. NVMe: Make I/O timeout a module parameter NVMe: CPU hot plug notification NVMe: per-cpu io queues NVMe: Replace DEFINE_PCI_DEVICE_TABLE NVMe: Fix divide-by-zero in nvme_trans_io_get_num_cmds NVMe: IOCTL path RCU protect queue access NVMe: RCU protected access to io queues NVMe: Initialize device reference count earlier NVMe: Add CONFIG_PM_SLEEP to suspend/resume functions
2014-04-11Merge tag 'for-linus-3.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs Pull 9p changes from Eric Van Hensbergen: "A bunch of updates and cleanup within the transport layer, particularly with a focus on RDMA" * tag 'for-linus-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: 9pnet_rdma: check token type before int conversion 9pnet: trans_fd : allocate struct p9_trans_fd and struct p9_conn together. 9pnet: p9_client->conn field is unused. Remove it. 9P: Get rid of REQ_STATUS_FLSH 9pnet_rdma: add cancelled() 9pnet_rdma: update request status during send 9P: Add cancelled() to the transport functions. net: Mark function as static in 9p/client.c 9P: Add memory barriers to protect request fields over cb/rpc threads handoff
2014-04-11Merge tag 'pm+acpi-3.15-rc1-3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more ACPI and power management fixes and updates from Rafael Wysocki: "This is PM and ACPI material that has emerged over the last two weeks and one fix for a CPU hotplug regression introduced by the recent CPU hotplug notifiers registration series. Included are intel_idle and turbostat updates from Len Brown (these have been in linux-next for quite some time), a new cpufreq driver for powernv (that might spend some more time in linux-next, but BenH was asking me so nicely to push it for 3.15 that I couldn't resist), some cpufreq fixes and cleanups (including fixes for some silly breakage in a couple of cpufreq drivers introduced during the 3.14 cycle), assorted ACPI cleanups, wakeup framework documentation fixes, a new sysfs attribute for cpuidle and a new command line argument for power domains diagnostics. Specifics: - Fix for a recently introduced CPU hotplug regression in ARM KVM from Ming Lei. - Fixes for breakage in the at32ap, loongson2_cpufreq, and unicore32 cpufreq drivers introduced during the 3.14 cycle (-stable material) from Chen Gang and Viresh Kumar. - New powernv cpufreq driver from Vaidyanathan Srinivasan, with bits from Gautham R Shenoy and Srivatsa S Bhat. - Exynos cpufreq driver fix preventing it from being included into multiplatform builds that aren't supported by it from Sachin Kamat. - cpufreq cleanups related to the usage of the driver_data field in struct cpufreq_frequency_table from Viresh Kumar. - cpufreq ppc driver cleanup from Sachin Kamat. - Intel BayTrail support for intel_idle and ACPI idle from Len Brown. - Intel CPU model 54 (Atom N2000 series) support for intel_idle from Jan Kiszka. - intel_idle fix for Intel Ivy Town residency targets from Len Brown. - turbostat updates (Intel Broadwell support and output cleanups) from Len Brown. - New cpuidle sysfs attribute for exporting C-states' target residency information to user space from Daniel Lezcano. - New kernel command line argument to prevent power domains enabled by the bootloader from being turned off even if they are not in use (for diagnostics purposes) from Tushar Behera. - Fixes for wakeup sysfs attributes documentation from Geert Uytterhoeven. - New ACPI video blacklist entry for ThinkPad Helix from Stephen Chandler Paul. - Assorted ACPI cleanups and a Kconfig help update from Jonghwan Choi, Zhihui Zhang, Hanjun Guo" * tag 'pm+acpi-3.15-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (28 commits) ACPI: Update the ACPI spec information in Kconfig arm, kvm: fix double lock on cpu_add_remove_lock cpuidle: sysfs: Export target residency information cpufreq: ppc: Remove duplicate inclusion of fsl_soc.h cpufreq: create another field .flags in cpufreq_frequency_table cpufreq: use kzalloc() to allocate memory for cpufreq_frequency_table cpufreq: don't print value of .driver_data from core cpufreq: ia64: don't set .driver_data to index cpufreq: powernv: Select CPUFreq related Kconfig options for powernv cpufreq: powernv: Use cpufreq_frequency_table.driver_data to store pstate ids cpufreq: powernv: cpufreq driver for powernv platform cpufreq: at32ap: don't declare local variable as static cpufreq: loongson2_cpufreq: don't declare local variable as static cpufreq: unicore32: fix typo issue for 'clk' cpufreq: exynos: Disable on multiplatform build PM / wakeup: Correct presence vs. emptiness of wakeup_* attributes PM / domains: Add pd_ignore_unused to keep power domains enabled ACPI / dock: Drop dock_device_ids[] table ACPI / video: Favor native backlight interface for ThinkPad Helix ACPI / thermal: Fix wrong variable usage in debug statement ...
2014-04-11net: Fix use after free by removing length arg from sk_data_ready callbacks.David S. Miller
Several spots in the kernel perform a sequence like: skb_queue_tail(&sk->s_receive_queue, skb); sk->sk_data_ready(sk, skb->len); But at the moment we place the SKB onto the socket receive queue it can be consumed and freed up. So this skb->len access is potentially to freed up memory. Furthermore, the skb->len can be modified by the consumer so it is possible that the value isn't accurate. And finally, no actual implementation of this callback actually uses the length argument. And since nobody actually cared about it's value, lots of call sites pass arbitrary values in such as '0' and even '1'. So just remove the length argument from the callback, that way there is no confusion whatsoever and all of these use-after-free cases get fixed as a side effect. Based upon a patch by Eric Dumazet and his suggestion to audit this issue tree-wide. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-11Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pullx86 core platform updates from Peter Anvin: "This is the x86/platform branch with the objectionable IOSF patches removed. What is left is proper memory handling for Intel GPUs, and a change to the Calgary IOMMU code which will be required to make kexec work sanely on those platforms after some upcoming kexec changes" * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, calgary: Use 8M TCE table size by default x86/gpu: Print the Intel graphics stolen memory range x86/gpu: Add Intel graphics stolen memory quirk for gen2 platforms x86/gpu: Add vfunc for Intel graphics stolen memory base address
2014-04-11mm: slab/slub: use page->list consistently instead of page->lruDave Hansen
'struct page' has two list_head fields: 'lru' and 'list'. Conveniently, they are unioned together. This means that code can use them interchangably, which gets horribly confusing like with this nugget from slab.c: > list_del(&page->lru); > if (page->active == cachep->num) > list_add(&page->list, &n->slabs_full); This patch makes the slab and slub code use page->lru universally instead of mixing ->list and ->lru. So, the new rule is: page->lru is what the you use if you want to keep your page on a list. Don't like the fact that it's not called ->list? Too bad. Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com> Acked-by: Christoph Lameter <cl@linux.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Pekka Enberg <penberg@kernel.org>