summaryrefslogtreecommitdiffstats
path: root/drivers/usb/chipidea
AgeCommit message (Collapse)Author
2016-03-17Merge tag 'usb-4.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big USB patchset for 4.6-rc1. The normal mess is here, gadget and xhci fixes and updates, and lots of other driver updates and cleanups as well. Full details are in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'usb-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (266 commits) USB: core: let USB device know device node usb: devio: Add ioctl to disallow detaching kernel USB drivers. usb: gadget: f_acm: Fix configfs attr name usb: udc: lpc32xx: remove USB PLL and USB OTG clock management usb: udc: lpc32xx: remove direct access to clock controller registers usb: udc: lpc32xx: switch to clock prepare/unprepare model usb: renesas_usbhs: gadget: fix giveback status code in usbhsg_pipe_disable() usb: gadget: renesas_usb3: Use ARCH_RENESAS usb: dwc2: Fix issues in dwc2_complete_non_isoc_xfer_ddma() usb: dwc2: Add support for Lantiq ARX and XRX SoCs usb: phy: generic: Handle late registration of gadget usb: gadget: bdc_udc: fix race condition in bdc_udc_exit() usb: musb: core: added missing const qualifier to musb_hdrc_platform_data::config usb: dwc2: Move host-specific core functions into hcd.c usb: dwc2: Move register save and restore functions usb: dwc2: Use kmem_cache_free() usb: dwc2: host: If using uframe scheduler, end splits better usb: dwc2: host: Totally redo the microframe scheduler usb: dwc2: host: Properly set even/odd frame usb: dwc2: host: Add dwc2_hcd_get_future_frame_number() call ...
2016-03-04usb: chipidea: otg: add A idle to B disconnect timerLi Jun
B-device detects that bus is idle for more than TB_AIDL_BDIS min and begins HNP by turning off pullup on DP, this allows the bus to discharge to the SE0 state. This timer was missed and failed with PET test: 6.8.5 B-UUT HNP of USB OTG and EH automated compliance plan v1.2, this patch is to fix this timing issue. Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04usb: chipidea: otg: enable HNP polling support for gadget and hostLi Jun
Enable HNP polling support for chipidea gadget and allocate memory for host request flag when otg fsm init. Acked-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04usb: chipidea: otg: set host_request_flag for gadgetLi Jun
Set host_request_flag if the current peripheral wants to take host role via changing a_bus_req or b_bus_req by user application. Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04usb: chipidea: udc: bypass otg status selector handling to gadget driverLi Jun
Since gadget driver will handle this request, so controller driver bypass it. Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-01Merge tag 'usb-ci-v4.6-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: - Add platform interface to choose ttctrl.ttha - Some tiny improvements
2016-03-01Merge 4.5-rc6 into usb-nextGreg Kroah-Hartman
We want the USB fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-29usb: chipidea: imx: avoid EPROBE_DEFER printed as errorStefan Agner
Avoid printing an error if adding the device failes with return value EPROBE_DEFFER. This may happen e.g. due to missing GPIO for the vbus-supply regulator. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-02-29Revert "usb: chipidea: imx: enable CI_HDRC_SET_NON_ZERO_TTHA"Peter Chen
This reverts commit e765bfb73ff7. In the most of cases, we only use one transaction per frame and the frame rate may be high, If the platforms want to support multiple transactions but less frame rate cases like [1] and [2], it can set "non-zero-ttctrl-ttha" at dts. [1] http://www.spinics.net/lists/linux-usb/msg123125.html [2] http://www.spinics.net/lists/linux-usb/msg118679.html Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-02-29usb: chipidea: add system interface for ttctrl.tthaPeter Chen
In chipidea IP RTL, there is a very limited design for siTD, the detail like below: There is no Max Packet Size at siTD, so it uses one constant for both Max Packet Size for packet and the packet size for the last transaction when considering schedule. If the ttctrl.ttha does not match against Hub Address field in siTD, this constant is 188 bytes, else this constant is 1023 bytes. If the ttctrl.ttha is non-zero value, RTL will use 188 as this constant, so it will lose the data if the packet size is larger than 188 bytes, eg, if we playback a wav which format is 48khz, 16 bits, 2 channels, the packet size will be 192bytes, but the controller will only send 188 bytes for this packet, the noise will be heared using USB audio card. The use case is single transaction, but higher frame rate. If the ttctr.ttha is zero value, we can send 1023 bytes within one transaction, but the controller will not accept the coming tranaction if it considers the schedule time is less than 1023 bytes. So the limitation is we can't schedule as many as transactions within frame. If the total bytes is already 256 bytes for previous transactions within frame, it can't accept another transaction. The use case is multiple transactions, but less frame rate. Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-02-29usb: chipidea: udc: remove unused value assignmentLi Jun
retval is assigned to be -EOVERFLOW but is overwritten later before it's used, remove this unused value assignment. Signed-off-by: Li Jun <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-02-29usb: chipidea: add CI_HDRC_TURN_VBUS_EARLY_ON for imx23Stefan Wahren
Until now the imx23 uses the imx27 platform flag. But the imx23 needs the flag CI_HDRC_TURN_VBUS_EARLY_ON, too. So fix this by adding a separate platform flag. Suggested-by: Peter Chen <peter.chen@nxp.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-02-25usb: chipidea: otg: change workqueue ci_otg as freezablePeter Chen
If we use USB ID pin as wakeup source, and there is a USB block device on this USB OTG (ID) cable, the system will be deadlock after system resume. The root cause for this problem is: the workqueue ci_otg may try to remove hcd before the driver resume has finished, and hcd will disconnect the device on it, then, it will call device_release_driver, and holds the device lock "dev->mutex", but it is never unlocked since it waits workqueue writeback to run to flush the block information, but the workqueue writeback is freezable, it is not thawed before driver resume has finished. When the driver (device: sd 0:0:0:0:) resume goes to dpm_complete, it tries to get its device lock "dev->mutex", but it can't get it forever, then the deadlock occurs. Below call stacks show the situation. So, in order to fix this problem, we need to change workqueue ci_otg as freezable, then the work item in this workqueue will be run after driver's resume, this workqueue will not be blocked forever like above case since the workqueue writeback has been thawed too. Tested at: i.mx6qdl-sabresd and i.mx6sx-sdb. [ 555.178869] kworker/u2:13 D c07de74c 0 826 2 0x00000000 [ 555.185310] Workqueue: ci_otg ci_otg_work [ 555.189353] Backtrace: [ 555.191849] [<c07de4fc>] (__schedule) from [<c07dec6c>] (schedule+0x48/0xa0) [ 555.198912] r10:ee471ba0 r9:00000000 r8:00000000 r7:00000002 r6:ee470000 r5:ee471ba4 [ 555.206867] r4:ee470000 [ 555.209453] [<c07dec24>] (schedule) from [<c07e2fc4>] (schedule_timeout+0x15c/0x1e0) [ 555.217212] r4:7fffffff r3:edc2b000 [ 555.220862] [<c07e2e68>] (schedule_timeout) from [<c07df6c8>] (wait_for_common+0x94/0x144) [ 555.229140] r8:00000000 r7:00000002 r6:ee470000 r5:ee471ba4 r4:7fffffff [ 555.235980] [<c07df634>] (wait_for_common) from [<c07df790>] (wait_for_completion+0x18/0x1c) [ 555.244430] r10:00000001 r9:c0b5563c r8:c0042e48 r7:ef086000 r6:eea4372c r5:ef131b00 [ 555.252383] r4:00000000 [ 555.254970] [<c07df778>] (wait_for_completion) from [<c0043cb8>] (flush_work+0x19c/0x234) [ 555.263177] [<c0043b1c>] (flush_work) from [<c0043fac>] (flush_delayed_work+0x48/0x4c) [ 555.271106] r8:ed5b5000 r7:c0b38a3c r6:eea439cc r5:eea4372c r4:eea4372c [ 555.277958] [<c0043f64>] (flush_delayed_work) from [<c00eae18>] (bdi_unregister+0x84/0xec) [ 555.286236] r4:eea43520 r3:20000153 [ 555.289885] [<c00ead94>] (bdi_unregister) from [<c02c2154>] (blk_cleanup_queue+0x180/0x29c) [ 555.298250] r5:eea43808 r4:eea43400 [ 555.301909] [<c02c1fd4>] (blk_cleanup_queue) from [<c0417914>] (__scsi_remove_device+0x48/0xb8) [ 555.310623] r7:00000000 r6:20000153 r5:ededa950 r4:ededa800 [ 555.316403] [<c04178cc>] (__scsi_remove_device) from [<c0415e90>] (scsi_forget_host+0x64/0x68) [ 555.325028] r5:ededa800 r4:ed5b5000 [ 555.328689] [<c0415e2c>] (scsi_forget_host) from [<c0409828>] (scsi_remove_host+0x78/0x104) [ 555.337054] r5:ed5b5068 r4:ed5b5000 [ 555.340709] [<c04097b0>] (scsi_remove_host) from [<c04cdfcc>] (usb_stor_disconnect+0x50/0xb4) [ 555.349247] r6:ed5b56e4 r5:ed5b5818 r4:ed5b5690 r3:00000008 [ 555.355025] [<c04cdf7c>] (usb_stor_disconnect) from [<c04b3bc8>] (usb_unbind_interface+0x78/0x25c) [ 555.363997] r8:c13919b4 r7:edd3c000 r6:edd3c020 r5:ee551c68 r4:ee551c00 r3:c04cdf7c [ 555.371892] [<c04b3b50>] (usb_unbind_interface) from [<c03dc248>] (__device_release_driver+0x8c/0x118) [ 555.381213] r10:00000001 r9:edd90c00 r8:c13919b4 r7:ee551c68 r6:c0b546e0 r5:c0b5563c [ 555.389167] r4:edd3c020 [ 555.391752] [<c03dc1bc>] (__device_release_driver) from [<c03dc2fc>] (device_release_driver+0x28/0x34) [ 555.401071] r5:edd3c020 r4:edd3c054 [ 555.404721] [<c03dc2d4>] (device_release_driver) from [<c03db304>] (bus_remove_device+0xe0/0x110) [ 555.413607] r5:edd3c020 r4:ef17f04c [ 555.417253] [<c03db224>] (bus_remove_device) from [<c03d8128>] (device_del+0x114/0x21c) [ 555.425270] r6:edd3c028 r5:edd3c020 r4:ee551c00 r3:00000000 [ 555.431045] [<c03d8014>] (device_del) from [<c04b1560>] (usb_disable_device+0xa4/0x1e8) [ 555.439061] r8:edd3c000 r7:eded8000 r6:00000000 r5:00000001 r4:ee551c00 [ 555.445906] [<c04b14bc>] (usb_disable_device) from [<c04a8e54>] (usb_disconnect+0x74/0x224) [ 555.454271] r9:edd90c00 r8:ee551000 r7:ee551c68 r6:ee551c9c r5:ee551c00 r4:00000001 [ 555.462156] [<c04a8de0>] (usb_disconnect) from [<c04a8fb8>] (usb_disconnect+0x1d8/0x224) [ 555.470259] r10:00000001 r9:edd90000 r8:ee471e2c r7:ee551468 r6:ee55149c r5:ee551400 [ 555.478213] r4:00000001 [ 555.480797] [<c04a8de0>] (usb_disconnect) from [<c04ae5ec>] (usb_remove_hcd+0xa0/0x1ac) [ 555.488813] r10:00000001 r9:ee471eb0 r8:00000000 r7:ef3d9500 r6:eded810c r5:eded80b0 [ 555.496765] r4:eded8000 [ 555.499351] [<c04ae54c>] (usb_remove_hcd) from [<c04d4158>] (host_stop+0x28/0x64) [ 555.506847] r6:eeb50010 r5:eded8000 r4:eeb51010 [ 555.511563] [<c04d4130>] (host_stop) from [<c04d09b8>] (ci_otg_work+0xc4/0x124) [ 555.518885] r6:00000001 r5:eeb50010 r4:eeb502a0 r3:c04d4130 [ 555.524665] [<c04d08f4>] (ci_otg_work) from [<c00454f0>] (process_one_work+0x194/0x420) [ 555.532682] r6:ef086000 r5:eeb502a0 r4:edc44480 [ 555.537393] [<c004535c>] (process_one_work) from [<c00457b0>] (worker_thread+0x34/0x514) [ 555.545496] r10:edc44480 r9:ef086000 r8:c0b1a100 r7:ef086034 r6:00000088 r5:edc44498 [ 555.553450] r4:ef086000 [ 555.556032] [<c004577c>] (worker_thread) from [<c004bab4>] (kthread+0xdc/0xf8) [ 555.563268] r10:00000000 r9:00000000 r8:00000000 r7:c004577c r6:edc44480 r5:eddc15c0 [ 555.571221] r4:00000000 [ 555.573804] [<c004b9d8>] (kthread) from [<c000fef0>] (ret_from_fork+0x14/0x24) [ 555.581040] r7:00000000 r6:00000000 r5:c004b9d8 r4:eddc15c0 [ 553.429383] sh D c07de74c 0 694 691 0x00000000 [ 553.435801] Backtrace: [ 553.438295] [<c07de4fc>] (__schedule) from [<c07dec6c>] (schedule+0x48/0xa0) [ 553.445358] r10:edd3c054 r9:edd3c078 r8:edddbd50 r7:edcbbc00 r6:c1377c34 r5:60000153 [ 553.453313] r4:eddda000 [ 553.455896] [<c07dec24>] (schedule) from [<c07deff8>] (schedule_preempt_disabled+0x10/0x14) [ 553.464261] r4:edd3c058 r3:0000000a [ 553.467910] [<c07defe8>] (schedule_preempt_disabled) from [<c07e0bbc>] (mutex_lock_nested+0x1a0/0x3e8) [ 553.477254] [<c07e0a1c>] (mutex_lock_nested) from [<c03e927c>] (dpm_complete+0xc0/0x1b0) [ 553.485358] r10:00561408 r9:edd3c054 r8:c0b4863c r7:edddbd90 r6:c0b485d8 r5:edd3c020 [ 553.493313] r4:edd3c0d0 [ 553.495896] [<c03e91bc>] (dpm_complete) from [<c03e9388>] (dpm_resume_end+0x1c/0x20) [ 553.503652] r9:00000000 r8:c0b1a9d0 r7:c1334ec0 r6:c1334edc r5:00000003 r4:00000010 [ 553.511544] [<c03e936c>] (dpm_resume_end) from [<c0079894>] (suspend_devices_and_enter+0x158/0x504) [ 553.520604] r4:00000000 r3:c1334efc [ 553.524250] [<c007973c>] (suspend_devices_and_enter) from [<c0079e74>] (pm_suspend+0x234/0x2cc) [ 553.532961] r10:00561408 r9:ed6b7300 r8:00000004 r7:c1334eec r6:00000000 r5:c1334ee8 [ 553.540914] r4:00000003 [ 553.543493] [<c0079c40>] (pm_suspend) from [<c0078a6c>] (state_store+0x6c/0xc0) [ 555.703684] 7 locks held by kworker/u2:13/826: [ 555.708140] #0: ("%s""ci_otg"){++++.+}, at: [<c0045484>] process_one_work+0x128/0x420 [ 555.716277] #1: ((&ci->work)){+.+.+.}, at: [<c0045484>] process_one_work+0x128/0x420 [ 555.724317] #2: (usb_bus_list_lock){+.+.+.}, at: [<c04ae5e4>] usb_remove_hcd+0x98/0x1ac [ 555.732626] #3: (&dev->mutex){......}, at: [<c04a8e28>] usb_disconnect+0x48/0x224 [ 555.740403] #4: (&dev->mutex){......}, at: [<c04a8e28>] usb_disconnect+0x48/0x224 [ 555.748179] #5: (&dev->mutex){......}, at: [<c03dc2f4>] device_release_driver+0x20/0x34 [ 555.756487] #6: (&shost->scan_mutex){+.+.+.}, at: [<c04097d0>] scsi_remove_host+0x20/0x104 Cc: <stable@vger.kernel.org> #v3.14+ Cc: Jun Li <jun.li@nxp.com> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-02-20chipidea: error on overflow for port_test_writeAlan
The write value is 8bit, but currently writing a larger number (eg a doubled digit) is not errored but instead gets cast and sets off an action probably undesired. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-19usb: chipidea: fix return value check in ci_hdrc_pci_probe()Wei Yongjun
In case of error, the function usb_phy_generic_register() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Peter Chen <peter.chen@nxp.com>
2016-02-19usb: chipidea: error on overflow for port_test_writeAlan
The write value is 8bit, but currently writing a larger number (eg a doubled digit) is not errored but instead gets cast and sets off an action probably undesired. Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Peter Chen <peter.chen@nxp.com> (Change the style of commit log to fix checkpatch.pl warning)
2016-01-24usb: chipidea: debug: use list_for_each_entryGeliang Tang
Use list_for_each_entry() instead of list_for_each() to simplify the code. Signed-off-by: Geliang Tang <geliangtang@163.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-01-20Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: - Make <modname>-m in makefiles work like <modname>-y and fix the fallout - Minor genksyms fix - Fix race with make -j install modules_install - Move -Wsign-compare from make W=1 to W=2 - Other minor fixes * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: Demote 'sign-compare' warning to W=2 Makefile: revert "Makefile: Document ability to make file.lst and file.S" partially kbuild: Do not run modules_install and install in paralel genksyms: Handle string literals with spaces in reference files fixdep: constify strrcmp arguments ath10k: Fix build with CONFIG_THERMAL=m Revert "drm: Hack around CONFIG_AGP=m build failures" kbuild: Allow to specify composite modules with modname-m staging/ad7606: Actually build the interface modules
2015-12-24usb: chipidea: otg: use usb autosuspend to suspend bus for HNPLi Jun
Directly manipulate the controller regsiter to suspend the usb bus for HNP is not the proper way, this should be done through the usbcore by usb autosuspend. So to start HNP, autosuspend support should be added for OTG devices interface driver if it's not enabled. Signed-off-by: Li Jun <jun.li@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-12-24usb: chipidea: host: set host to be null after hcd is freedLi Jun
Set ci->hcd and ci->otg.host to be null in host_stop since the hcd already freed. Signed-off-by: Li Jun <jun.li@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-12-24usb: chipidea: removing of_find_propertySaurabh Sengar
call to of_find_property() before of_property_read_u32() is unnecessary. of_property_read_u32() anyway calls to of_find_property() only. Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-12-24usb: chipidea: implement platform shutdown callbackAndreas Fenkart
disable wakeup irq during shutdown, otherwise kexec fails for kernels that setup irq handlers before resetting the hardware Signed-off-by: Andreas Fenkart <andreas.fenkart@dev.digitalstrom.org> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-12-24usb: chipidea: clean up CONFIG_USB_CHIPIDEA_DEBUG referencePeter Chen
Since this configuration option has deleted, cleans up all its references. Signed-off-by: Peter Chen <peter.chen@freescale.com> Reported-by: Valentin Rothberg <valentinrothberg@gmail.com>
2015-12-24usb: chipidea: delete static debug supportPeter Chen
Since we have dynamic debug support, delete static debug for chipidea Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-12-24usb: chipidea: support debugfs without CONFIG_USB_CHIPIDEA_DEBUGPeter Chen
Since we need to mount debugfs to show/store the things we want to debug, it is duplicated to add another configuration to enable it. Meanwhile, with CONFIG_USB_CHIPIDEA_DEBUG, we can't support chipidea debugfs at runtime. Signed-off-by: Peter Chen <peter.chen@freescale.com> Cc: Jun Li <jun.li@freescale.com>
2015-12-24usb: chipidea: udc: improve error handling on _hardware_enqueueFelipe F. Tonello
_hardware_enqueue() didn't check for errors when using add_td_to_list() which can fail if dma_pool_alloc fails, thus causing a kernel panic when lastnode->ptr is NULL. Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-12-24usb: chipidea: udc: _ep_queue and _hw_queue cleanupFelipe F. Tonello
Update comments to reflect current state of functions. Signed-off-by: Felipe F. Tonello <eu@felipetonello.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-12-01usb: chipidea: msm: Use posted data writes on AHBAndy Gross
This patch sets the AHBMODE to allow for posted data writes. This results in higher performance. Signed-off-by: Andy Gross <agross@codeaurora.org> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-12-01usb : replace dma_pool_alloc and memset with dma_pool_zallocSaurabh Sengar
replace dma_pool_alloc and memset with a single call to dma_pool_zalloc Signed-off-by: Saurabh Sengar <saurabh.truth@gmail.com> Acked-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-25kbuild: Allow to specify composite modules with modname-mMichal Marek
This allows to write drm-$(CONFIG_AGP) += drm_agpsupport.o without having to handle CONFIG_AGP=y vs. CONFIG_AGP=m. Only support this syntax for modules, since built-in code depending on something modular cannot work and init/Makefile actually relies on the current semantics. There are a few drivers which adapted to the current semantics out of necessity; these are fixed to also work when the respective subsystem is modular. Acked-by: Peter Chen <peter.chen@freescale.com> [chipidea] Signed-off-by: Michal Marek <mmarek@suse.com>
2015-11-18usb: chipidea: imx: fix a possible NULL dereferenceLABBE Corentin
of_match_device could return NULL, and so cause a NULL pointer dereference later. Reported-by: coverity (CID 1324138) Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-11-18usb: chipidea: usbmisc_imx: fix a possible NULL dereferenceLABBE Corentin
of_match_device could return NULL, and so cause a NULL pointer dereference later. Renaming tmp_dev to of_id (like all others do) in the process. Reported-by: coverity (CID 1324135) Signed-off-by: LABBE Corentin <clabbe.montjoie@gmail.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-11-18usb: chipidea: otg: gadget module load and unload supportLi Jun
This patch is to support load and unload gadget driver in full OTG mode. Signed-off-by: Li Jun <jun.li@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com> Tested-by: Jiada Wang <jiada_wang@mentor.com> Cc: <stable@vger.kernel.org> #v4.0+
2015-11-18usb: chipidea: debug: disable usb irq while role switchLi Jun
Since the ci->role will be set after the host role start is complete, there will be nobody cared irq during start host if usb irq enabled. This error can be reproduced on i.mx6 sololite EVK board by: 1. disable otg id irq(IDIE) and disable all real otg properties of usbotg1 in dts. 2. boot up the board with ID cable and usb device connected. 3. echo gadget > /sys/kernel/debug/ci_hdrc.0/role 4. echo host > /sys/kernel/debug/ci_hdrc.0/role 5. irq 212: nobody cared. Cc: <stable@vger.kernel.org> # v3.10+ Signed-off-by: Li Jun <jun.li@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-11-18usb: chipidea: imx: refine clock operations to adapt for all platformsPeter Chen
Some i.mx platforms need three clocks to let controller work, but others only need one, refine clock operation to adapt for all platforms, it fixes a regression found at i.mx27. Signed-off-by: Peter Chen <peter.chen@freescale.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: <stable@vger.kernel.org> #v4.1+
2015-10-22Merge tag 'usb-ci-v4.4-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: USB Chipidea updates for v4.4-rc1 - Use extcon framework for VBUS and ID detect - Add imx6sx and imx7d support - Other small changes
2015-10-22usb: chipidea: otg: don't wait vbus drops below BSV when starts hostLi Jun
Some HW design may use ID pin state to control vbus for otg port, so before host role start, the vbus is already turned on, in this case, we do not need wait vbus dropping below BSV. Signed-off-by: Li Jun <jun.li@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-10-22chipidea: ci_hdrc_pci: use PCI_VDEVICE() instead of PCI_DEVICE()Sergei Shtylyov
Fix using the PCI_DEVICE() macro instead of less verbose PCI_VDEVICE(). Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-10-22usb: chipidea: imx: add imx6ul usb supportPeter Chen
Add imx6ul usb support. Signed-off-by: Peter chen <peter.chen@freescale.com> Signed-off-by: Li Jun <jun.li@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-10-22usb: chipidea: imx: add usb support for imx7dPeter Chen
Add imx7d usb support. Signed-off-by: Peter Chen <peter.chen@freescale.com> Signed-off-by: Li Jun <jun.li@freescale.com>
2015-10-22usb: chipidea: Add support for 'phy-clkgate-delay-us' propertyFabio Estevam
Add support for the optional 'phy-clkgate-delay-us' property that is used to describe the delay time between putting PHY into low power mode and turning off the PHY clock. Signed-off-by: Li Jun <jun.li@freescale.com> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-10-22usb: chipidea: Use extcon framework for VBUS and ID detectIvan T. Ivanov
On recent Qualcomm platforms VBUS and ID lines are not routed to USB PHY LINK controller. Use extcon framework to receive connect and disconnect ID and VBUS notification. Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-09-27usb: common: of_usb_get_dr_mode to usb_get_dr_modeHeikki Krogerus
By using the unified device property interface, the function can be made available for all platforms and not just the ones using DT. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-27usb: common: of_usb_get_maximum_speed to usb_get_maximum_speedHeikki Krogerus
By using the unified device property interface, the function can be made available for all platforms and not just the ones using DT. Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-09-16usb: chipidea: imx: fix a typo for imx6sxLi Jun
Use imx6sx instead of imx6sl's platform flags for imx6sx. Fixes: e14db48dfcf3 ("usb: chipidea: imx: add runtime power management support") Cc: <stable@vger.kernel.org> # v4.1+ Signed-off-by: Li Jun <jun.li@freescale.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-09-15usb: chipidea: add xilinx zynq platform dataNathan Sullivan
Due to having hardware tx buffers less than 512 bytes in size, streaming must be enabled on the Zynq for the udc to work at all. Add platform data specific to the Zynq udc, which does not set the CI_HDRC_DISABLE_STREAMING flag. Based on a patch by the same name from the Xilinx vendor tree. Signed-off-by: Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-09-15usb: chipidea: udc: using the correct stall implementationPeter Chen
According to spec, there are functional and protocol stalls. For functional stall, it is for bulk and interrupt endpoints, below are cases for it: - Host sends SET_FEATURE request for Set-Halt, the udc driver needs to set stall, and return true unconditionally. - The gadget driver may call usb_ep_set_halt to stall certain endpoints, if there is a transfer in pending, the udc driver should not set stall, and return -EAGAIN accordingly. These two kinds of stall need to be cleared by host using CLEAR_FEATURE request (Clear-Halt). For protocol stall, it is for control endpoint, this stall will be set if the control request has failed. This stall will be cleared by next setup request (hardware will do it). It fixed usbtest (drivers/usb/misc/usbtest.c) Test 13 "set/clear halt" test failure, meanwhile, this change has been verified by USB2 CV Compliance Test and MSC Tests. Cc: <stable@vger.kernel.org> #3.10+ Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Felipe Balbi <balbi@ti.com> Signed-off-by: Peter Chen <peter.chen@freescale.com>
2015-08-14Merge tag 'usb-ci-v4.3-rc1' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-next Peter writes: USB: chipidea updates for v4.3-rc1 The main changes are adding several system interfaces for tuning performance, and each vendors can adjust them according to their design configurations. Others are tiny improvements, like more well siTD supports, USB_DEVICE_A_HNP_SUPPORT supports, etc.
2015-08-14Merge tag 'usb-for-v4.3' of ↵Greg Kroah-Hartman
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next Felipe writes: usb: patches for v4.3 merge window New support for Allwinne SoC on the MUSB driver has been added to the list of glue layers. MUSB also got support for building all DMA engines in one binary; this will be great for distros. DWC3 now has no trace of dev_dbg()/dev_vdbg() usage. We will rely solely on tracing to debug DWC3. There was also a fix for memory corruption with EP0 when maxpacket size transfers are > 512 bytes. Robert's EP capabilities flags is making EP selection a lot simpler. UDCs are now required to set these flags up when adding endpoints to the framework. Other than these, we have the usual set of miscelaneous cleanups and minor fixes. Signed-off-by: Felipe Balbi <balbi@ti.com>
2015-08-14usb: chipidea: add tx/rx burst size configuration interfacePeter Chen
The user can adjust it through dts or platform data Signed-off-by: Peter Chen <peter.chen@freescale.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-25 00:31:22 +0000