aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/staging
AgeCommit message (Collapse)Author
2014-12-02staging: rtl8723au: Fold _ps_open_RF23a() into rtl8723au_hal_init()Jes Sorensen
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: rtl8723au: Do not write garbage to REG_SPS0_CTRLJes Sorensen
Use a separate variable to hold the value of REG_SPS0_CTRL to avoid it getting clobbered and writing out garbage to it, for the case of eRFPowerState == rf_sleep/rf_off && bRegSSPwrLvl == 1. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: rtl8723au: Remove no-op _InitHWLed() functionJes Sorensen
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: rtl8723au: Fold _InitNormalChipQueuePriority() into ↵Jes Sorensen
_InitQueuePriority() Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: rtl8723au: _InitPowerOn(): Don't zero init variables unnecessarilyJes Sorensen
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: rtl8723au: Fold rtl8723au_set_queue_pipe_mapping into ↵Jes Sorensen
rtl8723au_chip_configure() Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: rtl8723au: Remove write only struct hal_data_8723a.interfaceIndexJes Sorensen
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: rtl8723au: Remove unused rtw_sctx_done23a() functionJes Sorensen
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: rtl8723au: Eliminate do_queue_select() functionsJes Sorensen
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: rtl8723au: Fold rtw_ack_tx_done23a() into rtw23a_sctx_done_err()Jes Sorensen
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: rtl8732au: Partial clean up of rtl8723a_rf6052.cJes Sorensen
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: rtl8723au: Fold ODM_PhyStatusQuery23a_92CSeries() into ↵Jes Sorensen
ODM_PhyStatusQuery23a() Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: rtl8723au: recv_priv->rssi is not used for anythingJes Sorensen
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: rtl8723au: recv_priv.is_signal_dbg is never setJes Sorensen
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging:ft1000_pcmcia:Added a blank line after declarationAnjana Sasindran
This patch fix the checkpatch.pl warning WARNING: Missing a blank line after declaration Signed-off-by: Anjana Sasindran <anjanasasindran123@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: vt6655: s_cbFillTxBufHead remove parameter cbFrameBodySizeMalcolm Priestley
skb->len is available locally use that instead. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: vt6655: s_cbFillTxBufHead remove parameter *pPacketMalcolm Priestley
skb->data is available locally so use that instead. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: vt6655: s_cbFillTxBufHead remove unused parameter *puMACfragNumMalcolm Priestley
*puMACfragNum was part of old legacy functions. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: vt6655: remove unused typedef struct tagSSromRegMalcolm Priestley
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: vt6655: srom remove dead functionsMalcolm Priestley
Remove these unused functions SROMbWriteEmbedded SROMvRegBitsOn SROMvRegBitsOff SROMbIsRegBitsOn SROMbIsRegBitsOff SROMvWriteAllContents SROMvWriteEtherAddress SROMvReadSubSysVenId SROMbAutoLoad Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: vt6655: remove duplicate MACvSetPacketFilterMalcolm Priestley
Packet filtering is already done in vnt_configure. A call to MACvSetPacketFilter is not necessary in MACvInitialize as this will be done by vnt_configure when interface is up. Also remove macros associated with this function. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: panel: Move LCD-related state into struct lcdMariusz Gorski
Move more or less all LCD-related state into struct lcd in order to get better cohesion; use bool instead of int where it makes sense. Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com> Acked-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: panel: Remove more magic number comparisonMariusz Gorski
Use a defined value instead of magic number comparison for checking whether a module param value has been set. Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com> Acked-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: panel: Refactor LCD init codeMariusz Gorski
Rework lcd_init method to make it a little bit more clear about the precedence of the params, move LCD geometry and pins layout to the LCD struct and thus make the LCD-related module params effectively read-only. Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com> Acked-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: panel: Make two more module params read-onlyMariusz Gorski
Make keypad_type and lcd_type module params read-only. This step also starts making it more clear what is the precedence of device params coming from different sources (device profile, runtime module param values etc). Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com> Acked-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: panel: Start making module params read-onlyMariusz Gorski
Start decoupling module params from the actual device state, both for lcd and keypad, by keeping the params read-only and moving the device state to related structs. Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com> Acked-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: panel: Use defined value or checking module params stateMariusz Gorski
Avoid magic number and use a comparison with a defined value instead that checks whether module param has been set by the user to some value at loading time. Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com> Acked-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: panel: Remove magic numbersMariusz Gorski
Get rid of magic numbers indicating that the value of a module param is not set. Use a defined value instead. Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com> Acked-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: panel: Call init function directlyMariusz Gorski
Remove useless function and let the kernel call the actual init function directly. Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com> Acked-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: panel: Set default parport module param valueMariusz Gorski
Set default parport module param value to DEFAULT_PARPORT so that a if-block can be avoided. Signed-off-by: Mariusz Gorski <marius.gorski@gmail.com> Acked-by: Willy Tarreau <w@1wt.eu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: octeon: Fix checkpatch 80 character limit warningsLuis de Bethencourt
Fixing 80 character limit warnings in octeon/ethernet-rx.c Signed-off-by: Luis de Bethencourt <luis@debethencourt.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: comedi: adl_pci9118: eliminate DMA buffer defragmentation stepIan Abbott
The DMA operations used by the driver may have been set up to acquire data from unwanted channels in addition to the wanted channels. Currently, `interrupt_pci9118_ai_dma()` calls `defragment_dma_buffer()` to move all the wanted data to the start of the DMA buffer and then calls `comedi_buf_write_samples()` to copy it all to the comedi async buffer. Those two functions used to be called from `move_block_from_dma()` which was absorbed into `interrupt_pci9118_ai_dma()`. Reinstate `move_block_from_dma()` but rewrite it to copy data directly from the wanted fragments of the DMA buffer to the comedi async buffer without defragmenting the buffer first. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: comedi: adl_pci9118: try and avoid unnecessary DMA restartIan Abbott
`interrupt_pci9118_ai_dma()` is called on interrupt to transfer data from DMA buffers into the comedi async data buffer. Currently it always restarts DMA. If double buffering, it restarts DMA on the next DMA buffer before processing the current DMA buffer, otherwise it restarts DMA on the same DMA buffer after it has been processed. For single buffering we can avoid restarting the DMA transfer by checking the async event flags after the current buffer has been processed, which is easy. For double buffering, we need to know how many valid samples there are in the current buffer before it has been processed and determine whether there is enough to complete the acquisition. Call new function `valid_samples_in_act_dma_buf()` to determine the number of valid samples in the current DMA buffer, and compare that with the result of `comedi_nsamples_left()` to determine if DMA needs to be restarted. (`comedi_nsamples_left()` needs an upper bound to clamp to, so use the number of valid samples in the DMA buffer plus one for our test.) It is still possible for DMA to be restarted unnecessarily in the double buffer case if a `COMEDI_CB_OVERFLOW` event occurs while copying to the comedi async buffer, but it doesn't really matter. The ongoing DMA operation will get disabled when the subdevice's `cancel()` handler is called when the events are handled later in the interrupt service routine (as it does currently). Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: comedi: adl_pci9118: simplify interrupt_pci9118_ai_dma() a bitIan Abbott
Eliminate the `next_dma_buf` variable in `interrupt_pci9118_ai_dma()`. It holds the next value of `devpriv->dma_actbuf` when double buffering is used, but we can just set that to the next value directly at the point where the buffers are switched as the old value is not used anywhere else. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: rtl8188eu: hal: hal_intf.c: Cleaning up functions that are not used ↵Rickard Strandqvist
anywhere Removes some functions that are not used anywhere. rtw_hal_interrupt_handler() rtw_hal_sreset_get_wifi_status() This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging: rtl8188eu: usb_dvobj_init(): A NULL pointer check for ↵Jes Sorensen
usb_host_endpoints makes no sense struct usb_host_interface points to an array of struct usb_host_endpoints - it makes no sense to do a NULL pointer check for each pointer. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02staging:drivers:staging:rtl8188eu:hal:rtl8188e_hal_init.c: Added a blank ↵Anjana Sasindran
line after declaration This patch fix a checkpatch.pl warning WARNING:Missing blank line after declaration Signed-off-by: Anjana Sasindran <anjanasasindran123@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02Merge 3.18-rc7 into staging-work.Greg Kroah-Hartman
We want those staging fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-12-02[media] staging/media: fix querycapHans Verkuil
Querycap shouldn't set the version field (the core does that for you), but it should set the device_caps field. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2014-12-02Merge tag 'v3.18-rc7' into drm-nextDave Airlie
This fixes a bunch of conflicts prior to merging i915 tree. Linux 3.18-rc7 Conflicts: drivers/gpu/drm/exynos/exynos_drm_drv.c drivers/gpu/drm/i915/i915_drv.c drivers/gpu/drm/i915/intel_pm.c drivers/gpu/drm/tegra/dc.c
2014-11-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2014-11-27staging: r8188eu: Add new device ID for DLink GO-USB-N150Larry Finger
The DLink GO-USB-N150 with revision B1 uses this driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-27staging: unisys: remove pointless macrosGreg Kroah-Hartman
These macros aren't used anywhere, so just remove them. Cc: Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-27Revert "staging: unisys: fix CamelCase macro names in controlframework.h"Greg Kroah-Hartman
This reverts commit 75185f57f110a7c48d9d33a585320c93334adf0c because it modified the .gitignore file in the root of the tree, without saying it did so, which isn't acceptable. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26staging: comedi: adv_pci1723: remove comedi_device 'write_subdev' initH Hartley Sweeten
The comedi_device 'write_subdev' should only be initialized if the subdevice supports async commands. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26staging: comedi: adv_pci1723: tidy up multi-line commentsH Hartley Sweeten
Tidy up the multi-line comments to follow the CodingStyle. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26staging: comedi: adv_pci1723: update the MODULE_DESCRIPTIONH Hartley Sweeten
Update the MODULE_DESCRIPTION to something more useful than the generic "Comedi low-level driver". Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26staging: comedi: adv_pci1723: remove subdevice 'len_chanlist' initializationH Hartley Sweeten
The subdevice 'len_chanlist' is only used by subdevices that support async commands. Remove the unnecessary initializations in this driver. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26staging: comedi: adv_pci1723: tidy up DIO io_bits initializationH Hartley Sweeten
Tidy up the code that determines the initial io_bits (direction) of the digital I/O subdevice and remove the magic numbers. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-11-26staging: comedi: adv_pci1723: tidy up pci1723_dio_insn_config()H Hartley Sweeten
For aesthetics, tidy this function up and use the register defines to remove the magic numbers. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-07-02 02:04:15 +0000