summaryrefslogtreecommitdiffstats
path: root/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
AgeCommit message (Collapse)Author
2012-08-30bnx2x: Move netif_napi_add to the open callMerav Sicron
Move netif_napi_add for all queues from the probe call to the open call, to avoid the case that napi objects are added for queues that may eventually not be initialized and activated. With the former behavior, the driver could crash when netpoll was calling ndo_poll_controller. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-08-12bnx2x: Fix compiler warningsJoren Van Onder
Fix the following compiler warnings: - drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c:2908:3: warning: comparison of distinct pointer types lacks a cast [enabled by default] - drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c:1709:7: warning: comparison of distinct pointer types lacks a cast [enabled by default] Signed-off-by: Joren Van Onder <joren.vanonder@gmail.com> Acked-By: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-23bnx2x: Add new 57840 device IDsYuval Mintz
The 57840 boards come in two flavours: 2 x 20G and 4 x 10G. To better differentiate between the two flavours, a separate device ID was assigned to each. The silicon default value is still the currently supported 57840 device ID (0x168d), and since a user can damage the nvram (e.g., 'ethtool -E') the driver will still support this device ID to allow the user to amend the nvram back into a supported configuration. Notice this patch contains lines longer than 80 characters (strings). Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-17bnx2x: organize BDs calculation for stop/resumeDmitry Kravkov
Put the numbers used for stop/resume queue in a single place and fix the condition for sanity check. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-10drivers/net/ethernet: Fix non-kernel-doc comments with kernel-doc start markersBen Hutchings
Convert doxygen (or similar) formatted comments to kernel-doc or unformatted comment. Delete a few that are content-free. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-09bnx2x: populate skb->l4_rxhashEric Dumazet
l4_rxhash is set on skb when rxhash is obtained from canonical 4-tuple over transport ports/addresses. We can set skb->l4_rxhash for all incoming TCP packets on bnx2x for free, as cqe status contains a hash type information. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-27bnx2x, bnx2fc, bnx2i, cnic: Add statistics support and FCoE capabilities ↵Barak Witkowski
advertisement 1. When FCoE offload driver is registered, copy its capabilities to the chip scratchpad. 2. Copy FCoE/iSCSI MAC addresses in aligned manner to chip scratchpad. 3. Add FCoE/iSCSI statistics collection support Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Change date and version to 1.72.51-0Merav Sicron
This change updates the date and version of the bnx2x driver. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Support DCBX for all functionsBarak Witkowski
In multi-function device, allow configuring dcbx admin params from all drivers on a single physical port. Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Add support for ethtool -LMerav Sicron
Add support for ethtool -L/-l for setting and getting the number of RSS queues. The 'combined' field is used as we don't support separate IRQ for Rx and Tx. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Split the FP structureBarak Witkowski
This patch moves some fields out of the FP structure to different structures, in order to minimize size of contigiuous memory allocated. Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Move the CNIC L2 CIDs to be right after the RSS CIDsMerav Sicron
Currently the CNIC-related L2 CIDs (for sending control FCoE / iSCSI packets) were at fixed position, according to the maximal number of RSS queues multiplied by the number of traffic-classes. This change makes the CIDs dynamic, as they are defined to be right after the highest RSS CID. This decreases the memory allocated for the context. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Make the transmission queues adjacentMerav Sicron
In the current scheme the transmission queues of traffic-class 0 were 0-15, the transmission queues of traffic-class 1 were 16-31 and so on. If the number of RSS queues was smaller than 16, there were gaps in transmission queues numbering, as well as in CIDs numbering. This is both a waste (especially when 16 is increased to 64), and may causes problems with flushing queues when reducing the number of RSS queues (using ethtool -L). The new scheme eliminates the gaps. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Allow more than 64 L2 CIDsMerav Sicron
With increased number of RSS queues, each multiplied by the number of traffic- classes, we may have up to 64*3=192 CIDs. The current driver scheme with regard to context allocation supports only 64 CIDs. The new scheme enables scatter- gatehr list of pages for the context. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Return only online tests for MFMerav Sicron
1. In multi-function device, show only the online tests in self-test results as only these test are performed (offline tests cannot be performed as they may corrupt the traffic of other functions on the same physical port). Note that multi-function mode cannot change while the driver is up. 2. Check result code in NIC load and act accordingly. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19bnx2x: Add support for external LBMerav Sicron
This change enables to do self-test with external loopback via ethtool. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-13bnx2x: fix checksum validationEric Dumazet
bnx2x driver incorrectly sets ip_summed to CHECKSUM_UNNECESSARY on encapsulated segments. TCP stack happily accepts frames with bad checksums, if they are inside a GRE or IPIP encapsulation. Our understanding is that if no IP or L4 csum validation was done by the hardware, we should leave ip_summed as is (CHECKSUM_NONE), since hardware doesn't provide CHECKSUM_COMPLETE support in its cqe. Then, if IP/L4 checksumming was done by the hardware, set CHECKSUM_UNNECESSARY if no error was flagged. Patch based on findings and analysis from Robert Evans Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Yaniv Rosner <yanivr@broadcom.com> Cc: Merav Sicron <meravs@broadcom.com> Cc: Tom Herbert <therbert@google.com> Cc: Robert Evans <evansr@google.com> Cc: Willem de Bruijn <willemb@google.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-23bnx2x: Update driver version to 1.72.50-0Barak Witkowski
Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-23bnx2x: remove gro workaroundDmitry Kravkov
Removes GRO workaround, as issue is fixed in FW 7.2.51. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-23bnx2x: add afex supportBarak Witkowski
Following patch adds afex multifunction support to the driver (afex multifunction is based on vntag header) and updates FW version used to 7.2.51. Support includes the following: 1. Configure vif parameters in firmware (default vlan, vif id, default priority, allowed priorities) according to values received from NIC. 2. Configure FW to strip/add default vlan according to afex vlan mode. 3. Notify link up to OS only after vif is fully initialized. 4. Support vif list set/get requests and configure FW accordingly. 5. Supply afex statistics upon request from NIC. 6. Special handling to L2 interface in case of FCoE vif. Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: Change to driver version 1.72.10-0Yuval Mintz
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: change to the rss engineDmitry Kravkov
This patch revises the way by which rss are configured, removing an unnecessary module paramater and unrequired modes. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: congestion management re-organizationYuval Mintz
The congestion management code has migrated into a common location, allowing all fw writes controlling mf congestion to be made in a single function in the code. This is a semantic change. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: Added support for a new device - 57811Barak Witkowski
Notice this patch includes lines with over 80 characters, as to not break strings. Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-04bnx2x: added support for working with one msix irq.Dmitry Kravkov
Until now, the bnx2x driver needed at least 2 available msix interrupt vectors in order to use msix. This patch add the possibility of configuring msix when only one interrupt vector is available. Notice this patch contains lines with over 80 characters, as it keeps print strings in a single line. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-27bnx2x: previous driver unload revisedYuval Mintz
The flow in which the bnx2x driver starts after a previous driver has been terminated in an 'unclean' manner has several bugs and FW risks, which makes it possible for the driver to fail after boot-from-SAN or kdump. This patch contains a revised flow which performs a safer initialization, solving the possible crash scenarios. Notice this patch contains lines with over 80 characters, as it keeps print-strings in a single line. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19bnx2x: consistent statistics for old FWYuval Mintz
Previously applied patch making the bnx2x statistics consistent did not apply to old FWs. This remedies it, extending the consistent behaviour to all drivers. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Reported-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19bnx2x: changed iscsi/fcoe mac init and macrosDmitry Kravkov
This includes changes in macros to better distinguish between the two protocols, and slightly changed the way their macs are set. Notice this file contains string print lines with more than 80 characters, as to not break prints. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-19bnx2x: revised driver printsMerav Sicron
We've revised driver prints, changing the mask of existing prints to allow better control over the debug messages, added prints to error scenarios, removed unnecessary prints and corrected some spelling. Please note that this patch contains lines with over 80 characters, as string messages were kept in a single line. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20bnx2x: update driver version to 1.72.10-0Dmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20bnx2x: add gro_checkDmitry Kravkov
The patch provides workaround for BUG in FW 7.2.16, which in GRO mode may miscalculate buffer and place on SGE one frag less than it could. It may happen only for some MTUs, we mark these MTUs with gro_check flag during device initialization or MTU change. Next FW should include fix for the issue and the patch could be reverted. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-20use FW 7.2.16Dmitry Kravkov
The patch integrates FW 7.2.16 HSI and implements driver part of GRO flow. FW 7.2.16 adds the ability to aggregate packets for GRO (and not just LRO) and also fixes some bugs. 1. Added new aggregation mode: GRO. In this mode packets are aggregated such that the original packets can be reconstructed by the OS. 2. 57712 HW bug workaround - initialized all CAM TM registers to 0x32. 3. Adding the FCoE statistics structures to the BNX2X HSI. 4. Wrong configuration of TX HW input buffer size may cause theoretical performance effect. Performed configuration fix. 5. FCOE - Arrival of packets beyond task IO size can lead to crash. Fix firmware data-in flow. 6. iSCSI - In rare cases of on-chip termination the graceful termination timer hangs, and the termination doesn't complete. Firmware fix to MSL timer tolerance. 7. iSCSI - Chip hangs when target sends FIN out-of-order or with isles open at the initiator side. Firmware implementation corrected to drop FIN received out-of-order or with isles still open. 8. iSCSI - Chip hangs when in case of retransmission not aligned to 4-bytes from the beginning of iSCSI PDU. Firmware implementation corrected to support arbitrary aligned retransmissions. 9. iSCSI - Arrival of target-initiated NOP-IN during intense ISCSI traffic might lead to crash. Firmware fix to relevant flow. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-19bnx2x: make bnx2x_close() static againMichal Schmidt
Commit 8304859a "bnx2x: add fan failure event handling" made the function bnx2x_close() non-static unnecessarily. The function is not called from other sources. Make it static again. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-15bnx2x: consistent statistics after internal driver reloadMintz Yuval
Currently bnx2x statistics are reset by inner driver reload, e.g. by MTU change. This patch fixes this issue - from now on statistics should only be reset upon device closure. Thanks to Michal Schmidt <mschmidt@redhat.com> for his initial patch regarding this issue. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-26bnx2x: Update version to 1.72.0 and copyrightsAriel Elior
Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-26bnx2x: Recovery flow bug fixesAriel Elior
1. Sample mcp pulse and mcp sequence in nic load instead of in init_one as they may change by the time we want to use them. 2. Allow cnic to access device during nic load (by adding a new "LOADING" state to recovery flow). This prevents the unnecessary cnic timeout which resulted by cnic attempting to access because nic is loading, but being blocked because of the Recovery state. 3. Issue 'fake' driver load command to mcp when last driver unloads to prevent mcp from taking ownership. When recovery is complete unload fake driver to allow mcp to initialize the hardware before first driver loads. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06bnx2x, cnic: support DRV_INFO upon FW requestBarak Witkowski
Add support to send driver capabilities, settings and statistics to management firmware. [ Redone using many local variables, removed many unnecessary inlines, and put #defines at the left margin suggested by Joe Perches ] Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06bnx2x: add fcoe statisticsBarak Witkowski
Add FCoE statistics support for FCoE capable devices. Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-06bnx2x: add PFC statisticsBarak Witkowski
Add Priority flow control counters for ethtool -S. Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-29bnx2x: handle iSCSI SD modeDmitry Kravkov
in iSCSI SD mode to bnx2x device assigned single mac address which is supposted to be iscsi mac. If this mode is recognized bnx2x will disable LRO, decrease number of queues to 1 and rx ring size to the minumum allowed by FW, this in order minimize memory use. It will tranfer mac for iscsi usage and zero primary mac of the netdev. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-14bnx2x: uses build_skb() in receive pathEric Dumazet
bnx2x uses following formula to compute its rx_buf_sz : dev->mtu + 2*L1_CACHE_BYTES + 14 + 8 + 8 + 2 Then core network adds NET_SKB_PAD and SKB_DATA_ALIGN(sizeof(struct skb_shared_info)) Final allocated size for skb head on x86_64 (L1_CACHE_BYTES = 64, MTU=1500) : 2112 bytes : SLUB/SLAB round this to 4096 bytes. Since skb truesize is then bigger than SK_MEM_QUANTUM, we have lot of false sharing because of mem_reclaim in UDP stack. One possible way to half truesize is to reduce the need by 64 bytes (2112 -> 2048 bytes) Instead of allocating a full cache line at the end of packet for alignment, we can use the fact that skb_shared_info sits at the end of skb->head, and we can use this room, if we convert bnx2x to new build_skb() infrastructure. skb_shared_info will be initialized after hardware finished its transfert, so we can eventually overwrite the final padding. Using build_skb() also reduces cache line misses in the driver, since we use cache hot skb instead of cold ones. Number of in-flight sk_buff structures is lower, they are recycled while still hot. Performance results : (820.000 pps on a rx UDP monothread benchmark, instead of 720.000 pps) Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> CC: Eilon Greenstein <eilong@broadcom.com> CC: Ben Hutchings <bhutchings@solarflare.com> CC: Tom Herbert <therbert@google.com> CC: Jamal Hadi Salim <hadi@mojatatu.com> CC: Stephen Hemminger <shemminger@vyatta.com> CC: Thomas Graf <tgraf@infradead.org> CC: Herbert Xu <herbert@gondor.apana.org.au> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: update driver version to 1.70.35-0Dmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: add fan failure event handlingAriel Elior
Shut down the device in case of fan failure to prevent HW damage. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: remove unused #defineDmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: simplify definition of RX_SGE_MASK_LEN and use it.Dmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-11-13bnx2x: use rx_queue index for skb_record_rx_queue()Dmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-27bnx2x: update driver version to 1.70.30-0Dmitry Kravkov
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-10-24Merge branch 'master' of ra.kernel.org:/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2011-09-22Merge branch 'master' of github.com:davem330/netDavid S. Miller
Conflicts: MAINTAINERS drivers/net/Kconfig drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c drivers/net/ethernet/broadcom/tg3.c drivers/net/wireless/iwlwifi/iwl-pci.c drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c drivers/net/wireless/rt2x00/rt2800usb.c drivers/net/wireless/wl12xx/main.c
2011-08-17bnx2x: Use pr_fmt and message logging cleanupsJoe Perches
Add pr_fmt(fmt) KBUILD_MODNAME ": " to prefix messages with "bnx2x: ". Remove #define DP_LEVEL and use pr_notice. Repeating KERN_<LEVEL> isn't necessary in multi-line printks. printk macro neatening, use fmt and ##__VA_ARGS__. Coalesce long formats. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-19 06:26:30 +0000