summaryrefslogtreecommitdiffstats
path: root/drivers/mfd/ab8500-core.c
AgeCommit message (Collapse)Author
2012-07-09mfd: Register ab8500 devices using the newly DT:ed MFD APILee Jones
Now the MFD API is Device Tree aware we can use it for platform registration again, even when booting with DT enabled. To aid in Device Node pointer allocation we provide each cell with the associative compatible string. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09mfd: Print ab8500 switch off causeJonas Aaberg
Instead of just printing the register value, also output some description of the value. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Reviewed-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09mfd: Register the ab8500 from db8500-prcmu using the MFD APILee Jones
Hierarchically, the AB8500 is a child of the DB8500 PRCMU. So now that Device Tree is being used and MFD core code is Device Tree aware, we can simply register DB8500 PRCMU from Device Tree in the normal way then allow the DB8500 PRCMU driver to register the AB8500 as a simple MFD device at probe time. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09mfd: Initialise the AB8500 driver at core_initcall timeLee Jones
The AB8500 is soon to have its own IRQ domain. For this to be useful the driver needs to be initialised earlier in the boot sequence. Here we move initialisation forward from arch_initcall to core_initcall time. Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09mfd: Generically describe interactions with the DB8500 PRCMULee Jones
There is only one method used to communicate with the DB8500 PRCMU, via I2C. Now this can be assumed, there is no requirement to specify the protocol in the function name. This patch removes protocol specifics and uses a more generic naming convention. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-07-09mfd: Add IRQ domain support for the AB8500Lee Jones
As the AB8500 is an IRQ controller in its own right, here we provide the AB8500 driver with IRQ domain support. This is required if we wish to reference any of its IRQs from a platform's Device Tree. Cc: Naga Radheshy <naga.radheshy@stericsson.com> Cc: Mattias Wallin <mattias.wallin@stericsson.com> Cc: Daniel Willerud <daniel.willerud@stericsson.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Enable Device Tree for ab8500-core driverLee Jones
This patch will allow the ab8500-core driver to be probed and set up when booting when Device Tree is enabled. This includes platform ID look-up which identifies the machine it is currently running on. If we are undergoing a DT enabled boot, we will refuse to setup each of the other ab8500-* devices, as they will be probed individually by DT. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-20mfd: Remove confusing ab8500-i2c file and merge into ab8500-coreLee Jones
ab8500-i2c is used as core code to register the ab8500 device. After allocating ab8500 memory, it immediately calls into ab8500-core where the real initialisation takes place. This patch moves all core registration and memory allocation into the true ab8500-core file and removes ab8500-i2c completely. Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-11mfd: Support of hierachical interrupt for ab8500Michel JAOUEN
Hierarchical interrupt is supported since ab8500 V2. However, it is not implemented in the ab8500-core driver. With the current implementation, when an ab9540 interrupt occurs, 17 Latch registers are read through i2c. With hierarchical interrupt implementation, there are only 4 i2c accesses. Signed-off-by: Maxime Coquelin <maxime.coquelin@stericsson.com> Reviewed-by: Michel Jaouen <michel.jaouen@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-01mfd: Add parameter to disable ab8500 battery managementRickard Andersson
This patch makes it possible to disable battery management via a module boot parameter. When 'ab8500-core.no_bm=1' then ab8500_btemp, ab8500_chargalg, ab8500_charger and ab8500_fg will not be probed. This boot parameter is used for scripted testing of the system. Signed-off-by: Rickard Andersson <rickard.andersson@stericsson.com> Reviewed-by: Jonas Aberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-01mfd: Deny ab8500 suspend if i2c transfer is ongoingJonas Aaberg
If we are in the middle of an I2C transfer we need to deny suspend of the AB8500 core. Implement an atomic reference counter for the I2C operations to make sure we don't do this. Signed-off-by: Jonas Aaberg <jonas.aberg@stericsson.com> Reviewed-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-05-01mfd: Add new resources on ab8500 AB8505 and AB9540Virupax Sadashivpetimath
The AB8505 and AB9540 has extended support for micro USB resistance detection, used for detecting chargers. Let's register resources for this resource. Let's also split off the separate codec device for AB9540. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Make use of the ab8500 firmware read-modify-write serviceMattias Nilsson
This patch updates the AB8500 driver to make use of the I2C read-modify-write service in the PRCMU firmware. Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com> Reviewed-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Support for the AB8500 AB8505 variantBengt Jonsson
This builds upon the changes done to support AB9540 so as also to support the AB8505 derivative of the AB8500 circuit. Signed-off-by: Bengt Jonsson <bengt.g.jonsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-16mfd: Don't use mutex_lock_interruptible in ab8500-coreRabin Vincent
This disadvantage of having it interruptible is that it would appear to work OK in most situations, but in the rare case that this call does fail, it can lead to misconfiguration of the AB, such as a regulator not being turned off and leading to a platform power consumption increase. There's no real benefit to having this interruptible. Make it a plain mutex_lock. The non-interruptability matches other low-level I/O functions such as SPI and I2C. Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Support AB9540 ab8500 variantLinus Walleij
The AB9540 variant of the AB8500 is basically close enough to use the same driver. This adds the new registers and deviations for this new chip variant. Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@stericsson.com> Signed-off-by: Alex Macro <alex.macro@stericsson.com> Signed-off-by: Michel Jaouen <michel.jaouen@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Parametrize ab8500 IRQ masks and registersLinus Walleij
This makes the AB8500 state struct contain the IRQ mask and register offsets previously hard-coded so as to make room for more AB8500 variants. Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@stericsson.com> Signed-off-by: Alex Macro <alex.macro@stericsson.com> Signed-off-by: Michel Jaouen <michel.jaouen@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Add ab8500 version detection and enforcingLinus Walleij
There are currently four different versions of the AB8500 around: AB8500, AB8505, AB9540 and AB8540. Unfortunately: - Some of the chips (AB8500, AB8505, AB9540) cannot read the AB8500_REV_REG register but return errors - Some of them have the same ID value in the hardware register AB8500_REV_REV, for example the first versions of AB8505 and AB9540 have 0xFF in this register - just like the AB8500. So we need to be able to enforce a certain version from the platform. We do this by using the id of the platform device that provides the read/write functions. Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@stericsson.com> Signed-off-by: Alex Macro <alex.macro@stericsson.com> Signed-off-by: Michel Jaouen <michel.jaouen@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-03-06mfd: Fix ab8500 error path bugLinus Walleij
We were not freeing the irq properly in the error path in the AB8500 driver. Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Maxime Coquelin <maxime.coquelin@stericsson.com> Signed-off-by: Alex Macro <alex.macro@stericsson.com> Signed-off-by: Michel Jaouen <michel.jaouen@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-01-09mfd: Unify abx500 headers in mfd/abx500Linus Walleij
This moves all the header files related to the abx500 family into a common include directory below mfd. From now on we place any subchip header in that directory. Headers previously in e.g. <linux/mfd/ab8500/gpio.h> get prefixed and are now e.g. <linux/mfd/abx500/ab8500-gpio.h>. The top-level abstract interface remains in <linux/mfd/abx500.h>. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-12-20mfd: add #ifdef CONFIG_DEBUG_FS guard for ab8500_debug_resourcesAxel Lin
Fix below build warning if CONFIG_DEBUG_FS is disabled. CC drivers/mfd/ab8500-core.o drivers/mfd/ab8500-core.c:623: warning: 'ab8500_debug_resources' defined but not used Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Expose TurnOnStatus in ab8500 sysfsAndrew Lynn
Expose TurnOnStatus (Power key, RTC alarm, Vbus detect, etc) in sysfs. This magic value can be read by system users to determine what caused the platform to turn on last (this) time. Signed-off-by: Andrew Lynn <andrew.lynn@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Reviewed-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Remove support for early drop ab8500 chipMattias Wallin
This patch removes the early drop version of ab8500 which have the really bad version nr 0x0. This chip should not be found in the wild and only exist as ST-Ericsson scrap equipment. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Add support for ab8500 v3.3Mattias Wallin
This patch adds support for ab8500 cut 3, MetalFix 3 or v3.3. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Jonas Aaberg <jonas.aberg@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-10-24mfd: Add ab8500 interrupt disable hookVirupax Sadashivpetimath
Add the missing interrupt disable hook in the irq_chip callbacks for ab8500. Signed-off-by: Virupax Sadashivpetimath <virupax.sadashivpetimath@stericsson.com> Reviewed-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Philippe Langlais <philippe.langlais@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: Update ab8500 subdevice listLinus Walleij
This synchronize the subdevice entries for the AB8500 MFD driver with the latest development of subdrivers for things like battery charging and temperature monitoring. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-07-31mfd: ab8500-core MFD devices marked as initdataRobert Rosengren
Internal MFD device structs are marked as __devinitdata since the kernel will allocate memory for the same when calling mfd_add_devices. Signed-off-by: Robert Rosengren <robert.rosengren@stericsson.com> Reviewed-by: Mattias Wallin <mattias.wallin@stericsson.com> Reviewed-by: Johan Palsson <johan.palsson@stericsson.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-05-26mfd: Provide ab8500-core enumerators for chip cutsLinus Walleij
Since functionality in MFD cells may need to be adjusted according to chip revision, let's enumerate them and keep track of them. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-28gpio: driver for 42 AB8500 GPIO pinsBibek Basu
To get rid of port expanders, the free GPIOs of ab8500 can be used. There are 42 GPIO pins. Out of which 16 are interrupt capable.This patch implements 16 virtual IRQ mapped to 16 interrupt capable AB8500 GPIOs. Signed-off-by: Bibek Basu <bibek.basu@stericsson.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> [Renamed header file as per MFD structure] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2011-03-27mfd: Cleanup irq namespaceThomas Gleixner
Converted with coccinelle. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: ab8500-core switch off status addedMattias Wallin
This patch adds a sysfs file with the ab8500 switch off status. The switch off status contains information of what caused the ab8500 chip to power off. A print during boot is also added. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-03-23mfd: ab8500 chip revision 3.0 supportMattias Wallin
This patch adds support for ab8500 chip revision cut 3.0. Also rephrased from Changes to Author in the header. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: ab8500-core chip version cut 2.0 supportMattias Wallin
This patch adds support for chip version 2.0 or cut 2.0. One new interrupt latch register - latch 12 - is introduced. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Convert AB8500 to new irq_ methodsMark Brown
The genirq core is being converted to supply struct irq_data to chips rather than the interrupt number. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: ab8500-core ioresources irq for subdrivers addedMattias Wallin
This patch adds the ioresources used by subdrivers to retrieve their interrupt. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: ab8500-core wake up from suspendMattias Wallin
This patch makes the system wake up from suspend when an ab8500 interrupt occur. This can for example be USB cable insert or an RTC alarm. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: Export ab8500 chip id to sysfsMattias Wallin
This patch adds a file into sysfs for reading out chip id. It has been requested for modem silent reboot. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Ludovic Barre <ludovic.barre@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2011-01-14mfd: ab8500-core improved error handling in get_chip_idMattias Wallin
We check for dev before dereferencing it. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-12-22mfd: Fix ab8500-core interrupt ffs bit bugMattias Wallin
We want to find the first set bit on value, not status. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: AB8500 debugfsMattias Wallin
This patch adds the possibility to read and write registers via the debug_fs. It also adds ranges of registers sorted by bank which makes it possible to read all defined registers in a bank. Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29misc: Add ab8500 pwm driverArun Murthy
This patch adds a Pulse Width Modulation driver for Analog Baseband Chip AB8500. Signed-off-by: Arun Murthy <arun.murthy@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-10-29mfd: Align ab8500 with the abx500 interfaceMattias Wallin
This patch makes the ab8500 mixed signal chip expose the same interface for register access as the ab3100, ab3550 and ab5500 chip. The ab8500_read() and ab8500_write() is removed and replaced with abx500_get_register_interruptible() and abx500_set_register_interruptible(). Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2010-09-05Input: add support for PowerOn button on the AB8500 MFDSundar R Iyer
Add the PowerOn (PonKey) button support to detect power on/off events. Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Sundar R Iyer <sundar.iyer@stericsson.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2010-08-11ab8500-mfd: add regulator support to ab8500 mfd deviceSundar R Iyer
Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-By: Mattias Wallin <mattias.wallin@stericsson.com> Acked-By: Bengt JONSSON <bengt.g.jonsson@stericsson.com> Signed-off-by: Sundar R Iyer <sundar.iyer@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-05-28mfd: New AB8500 driverRabin Vincent
Add a new driver to support the AB8500 Power Management chip, replacing the current AB4500. The new driver replaces the old one, instead of an incremental modification, because this is a substantial overhaul including: - Split of the driver into -core and -spi portions, to allow another interface layer to be added - Addition of interrupt support - Switch to MFD core API for handling subdevices - Simplification of the APIs to remove a redundant block parameter - Rename of the APIs and macros from ab4500_* to ab8500_* - Rename of the files from ab4500* to ab8500* - Change of the driver name from ab4500 to ab8500 Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-02 12:31:29 +0000