summaryrefslogtreecommitdiffstats
path: root/drivers/media
AgeCommit message (Collapse)Author
2014-05-21Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "Most of the changes are drivers fixes (rtl28xuu, fc2580, ov7670, davinci, gspca, s5p-fimc and s5c73m3). There is also a compat32 fix and one infoleak fixup at the media controller" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] V4L2: fix VIDIOC_CREATE_BUFS in 64- / 32-bit compatibility mode [media] V4L2: ov7670: fix a wrong index, potentially Oopsing the kernel from user-space [media] media-device: fix infoleak in ioctl media_enum_entities() [media] fc2580: fix tuning failure on 32-bit arch [media] Prefer gspca_sonixb over sn9c102 for all devices [media] media: davinci: vpfe: make sure all the buffers unmapped and released [media] staging: media: davinci: vpfe: make sure all the buffers are released [media] media: davinci: vpbe_display: fix releasing of active buffers [media] media: davinci: vpif_display: fix releasing of active buffers [media] media: davinci: vpif_capture: fix releasing of active buffers [media] s5p-fimc: Fix YUV422P depth [media] s5c73m3: Add missing rename of v4l2_of_get_next_endpoint() function [media] rtl28xxu: silence error log about disabled rtl2832_sdr module [media] rtl28xxu: do not hard depend on staging SDR module
2014-05-13[media] V4L2: fix VIDIOC_CREATE_BUFS in 64- / 32-bit compatibility modeGuennadi Liakhovetski
If a struct contains 64-bit fields, it is aligned on 64-bit boundaries within containing structs in 64-bit compilations. This is the case with struct v4l2_window, which contains pointers and is embedded into struct v4l2_format, and that one is embedded into struct v4l2_create_buffers. Unlike some other structs, used as a part of the kernel ABI as ioctl() arguments, that are packed, these structs aren't packed. This isn't a problem per se, but the ioctl-compat code for VIDIOC_CREATE_BUFS contains a bug, that triggers in such 64-bit builds. That code wrongly assumes, that in struct v4l2_create_buffers, struct v4l2_format immediately follows the __u32 memory field, which in fact isn't the case. This bug wasn't visible until now, because until recently hardly any applications used this ioctl() and mostly embedded 32-bit only drivers implemented it. This is changing now with addition of this ioctl() to some USB drivers, e.g. UVC. This patch fixes the bug by copying parts of struct v4l2_create_buffers separately. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com> Cc: stable@vger.kernel.org
2014-05-13[media] V4L2: ov7670: fix a wrong index, potentially Oopsing the kernel from ↵Guennadi Liakhovetski
user-space Commit 75e2bdad8901a0b599e01a96229be922eef1e488 "ov7670: allow configuration of image size, clock speed, and I/O method" uses a wrong index to iterate an array. Apart from being wrong, it also uses an unchecked value from user-space, which can cause access to unmapped memory in the kernel, triggered by a normal desktop user with rights to use V4L2 devices. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Jonathan Corbet <corbet@lwn.net> Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-05-01[media] media-device: fix infoleak in ioctl media_enum_entities()Salva Peiró
This fixes CVE-2014-1739. Signed-off-by: Salva Peiró <speiro@ai2.upv.es> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-16[media] fc2580: fix tuning failure on 32-bit archAntti Palosaari
There was some frequency calculation overflows which caused tuning failure on 32-bit architecture. Use 64-bit numbers where needed in order to avoid calculation overflows. Thanks for the Finnish person, who asked remain anonymous, reporting, testing and suggesting the fix. Cc: <stable@vger.kernel.org> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-16platform: Fix timberdale dependenciesJean Delvare
VIDEO_TIMBERDALE selects TIMB_DMA which itself depends on MFD_TIMBERDALE, so VIDEO_TIMBERDALE should either select or depend on MFD_TIMBERDALE as well. I chose to make it depend on it because I think it makes more sense and it is consistent with what other options are doing. Adding a "|| HAS_IOMEM" to the TIMB_DMA dependencies silenced the kconfig warning about unmet direct dependencies but it was wrong: without MFD_TIMBERDALE, TIMB_DMA is useless as the driver has no device to bind to. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-04-15[media] Prefer gspca_sonixb over sn9c102 for all devicesJean Delvare
The sn9c102 driver is deprecated. It was moved to staging in anticipation of its removal in a future kernel version. However, USB devices 0C45:6024 and 0C45:6025 are still handled by sn9c102 when both sn9c102 and gspca_sonixb are enabled. We must migrate all the users of these devices to the gspca_sonixb driver now, so that it gets sufficient testing before the sn9c102 driver is finally phased out. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-15[media] media: davinci: vpfe: make sure all the buffers unmapped and releasedLad, Prabhakar
this patch makes sure that it terminates if any IO in progress and also makes sure that all the buffers are unmapped. It was observed that with several runs of application the application sometimes failed to allocate memory, This patch makes sure it all the buffers are released. Using kmemleak it was found that buffer were not released, this patch fixes following issue, echo scan > /sys/kernel/debug/kmemleak Kernel message reads: memleak: 3 new suspected memory leaks (see /sys/kernel/debug/kmemleak) Then, cat /sys/kernel/debug/kmemleak unreferenced object 0xc564a480 (size 192): comm "mttest", pid 764, jiffies 4294945878 (age 487.160s) hex dump (first 32 bytes): 00 00 00 00 28 07 07 20 d0 02 00 00 e0 01 00 00 ....(.. ........ 00 00 00 00 00 64 05 00 01 00 00 00 01 00 00 00 .....d.......... backtrace: [<c00a98dc>] create_object+0x10c/0x28c [<c03ba8ec>] kmemleak_alloc+0x3c/0x70 [<c00a67c0>] __kmalloc+0x11c/0x1d4 [<c02b6f48>] __videobuf_alloc+0x1c/0x3c [<c02b6194>] videobuf_alloc_vb+0x38/0x80 [<c02b6638>] __videobuf_mmap_setup+0x9c/0x108 [<c02b6da0>] videobuf_reqbufs.part.10+0x12c/0x1bc [<c02b6e9c>] videobuf_reqbufs+0x6c/0x8c [<c02be2c4>] vpfe_reqbufs+0xcc/0x130 [<c02aae90>] v4l_reqbufs+0x50/0x54 [<c02aab54>] __video_do_ioctl+0x260/0x2c4 [<c02a9dd4>] video_usercopy+0xf0/0x310 [<c02aa008>] video_ioctl2+0x14/0x1c [<c02a562c>] v4l2_ioctl+0x104/0x14c [<c00bd320>] do_vfs_ioctl+0x80/0x2d0 [<c00bd5b4>] SyS_ioctl+0x44/0x64 unreferenced object 0xc564ac00 (size 192): comm "mttest", pid 764, jiffies 4294945878 (age 487.160s) hex dump (first 32 bytes): 01 00 00 00 28 07 07 20 d0 02 00 00 e0 01 00 00 ....(.. ........ 00 00 00 00 00 64 05 00 01 00 00 00 01 00 00 00 .....d.......... backtrace: [<c00a98dc>] create_object+0x10c/0x28c [<c03ba8ec>] kmemleak_alloc+0x3c/0x70 [<c00a67c0>] __kmalloc+0x11c/0x1d4 [<c02b6f48>] __videobuf_alloc+0x1c/0x3c [<c02b6194>] videobuf_alloc_vb+0x38/0x80 [<c02b6638>] __videobuf_mmap_setup+0x9c/0x108 [<c02b6da0>] videobuf_reqbufs.part.10+0x12c/0x1bc [<c02b6e9c>] videobuf_reqbufs+0x6c/0x8c [<c02be2c4>] vpfe_reqbufs+0xcc/0x130 [<c02aae90>] v4l_reqbufs+0x50/0x54 [<c02aab54>] __video_do_ioctl+0x260/0x2c4 [<c02a9dd4>] video_usercopy+0xf0/0x310 [<c02aa008>] video_ioctl2+0x14/0x1c [<c02a562c>] v4l2_ioctl+0x104/0x14c [<c00bd320>] do_vfs_ioctl+0x80/0x2d0 [<c00bd5b4>] SyS_ioctl+0x44/0x64 unreferenced object 0xc564a180 (size 192): comm "mttest", pid 764, jiffies 4294945880 (age 487.140s) hex dump (first 32 bytes): 02 00 00 00 28 07 07 20 d0 02 00 00 e0 01 00 00 ....(.. ........ 00 00 00 00 00 64 05 00 01 00 00 00 01 00 00 00 .....d.......... backtrace: [<c00a98dc>] create_object+0x10c/0x28c [<c03ba8ec>] kmemleak_alloc+0x3c/0x70 [<c00a67c0>] __kmalloc+0x11c/0x1d4 [<c02b6f48>] __videobuf_alloc+0x1c/0x3c [<c02b6194>] videobuf_alloc_vb+0x38/0x80 [<c02b6638>] __videobuf_mmap_setup+0x9c/0x108 [<c02b6da0>] videobuf_reqbufs.part.10+0x12c/0x1bc [<c02b6e9c>] videobuf_reqbufs+0x6c/0x8c [<c02be2c4>] vpfe_reqbufs+0xcc/0x130 [<c02aae90>] v4l_reqbufs+0x50/0x54 [<c02aab54>] __video_do_ioctl+0x260/0x2c4 [<c02a9dd4>] video_usercopy+0xf0/0x310 [<c02aa008>] video_ioctl2+0x14/0x1c [<c02a562c>] v4l2_ioctl+0x104/0x14c [<c00bd320>] do_vfs_ioctl+0x80/0x2d0 [<c00bd5b4>] SyS_ioctl+0x44/0x64 Reported-by: Jimmy Ho <jimmygge@gmail.com> Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-15[media] media: davinci: vpbe_display: fix releasing of active buffersLad, Prabhakar
from commit-id: b3379c6201bb3555298cdbf0aa004af260f2a6a4 "vb2: only call start_streaming if sufficient buffers are queued" the vb2 framework warns on (WARN_ON()) if all the active buffers are not released when streaming is stopped, initially the vb2 silently released the buffer internally if the buffer was not released by the driver. This patch fixes following issue: WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x1a0/0x218() Modules linked in: CPU: 0 PID: 2049 Comm: vpbe_display Tainted: G W 3.14.0-rc5-00414-ged97a6f #89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252e0c>] (__vb2_queue_cancel+0x1a0/0x218) [<c0252e0c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpbe_display_release+0x60/0x230) [<c025a65c>] (vpbe_display_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x1e0/0x224() Modules linked in: CPU: 0 PID: 2049 Comm: vpbe_display Tainted: G W 3.14.0-rc5-00414-ged97a6f #89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252c28>] (vb2_buffer_done+0x1e0/0x224) [<c0252c28>] (vb2_buffer_done) from [<c0252e3c>] (__vb2_queue_cancel+0x1d0/0x218) [<c0252e3c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpbe_display_release+0x60/0x230) [<c025a65c>] (vpbe_display_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a2 ]--- Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-15[media] media: davinci: vpif_display: fix releasing of active buffersLad, Prabhakar
from commit-id: b3379c6201bb3555298cdbf0aa004af260f2a6a4 "vb2: only call start_streaming if sufficient buffers are queued" the vb2 framework warns on (WARN_ON()) if all the active buffers are not released when streaming is stopped, initially the vb2 silently released the buffer internally if the buffer was not released by the driver. Also this patch moves the disabling of interrupts from relase() callback to stop_streaming() callback as which needs to be done ideally. This patch fixes following issue: WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x1a0/0x218() Modules linked in: CPU: 0 PID: 2049 Comm: vpif_display Tainted: G W 3.14.0-rc5-00414-ged97a6f #89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252e0c>] (__vb2_queue_cancel+0x1a0/0x218) [<c0252e0c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpif_release+0x60/0x230) [<c025a65c>] (vpif_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x1e0/0x224() Modules linked in: CPU: 0 PID: 2049 Comm: vpif_display Tainted: G W 3.14.0-rc5-00414-ged97a6f #89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252c28>] (vb2_buffer_done+0x1e0/0x224) [<c0252c28>] (vb2_buffer_done) from [<c0252e3c>] (__vb2_queue_cancel+0x1d0/0x218) [<c0252e3c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpif_release+0x60/0x230) [<c025a65c>] (vpif_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a2 ]--- Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-15[media] media: davinci: vpif_capture: fix releasing of active buffersLad, Prabhakar
from commit-id: b3379c6201bb3555298cdbf0aa004af260f2a6a4 "vb2: only call start_streaming if sufficient buffers are queued" the vb2 framework warns on (WARN_ON()) if all the active buffers are not released when streaming is stopped, initially the vb2 silently released the buffer internally if the buffer was not released by the driver. Also this patch moves the disabling of interrupts from relase() callback to stop_streaming() callback as which needs to be done ideally. This patch fixes following issue: WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:2011 __vb2_queue_cancel+0x1a0/0x218() Modules linked in: CPU: 0 PID: 2049 Comm: vpif_capture Tainted: G W 3.14.0-rc5-00414-ged97a6f #89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252e0c>] (__vb2_queue_cancel+0x1a0/0x218) [<c0252e0c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpif_release+0x60/0x230) [<c025a65c>] (vpif_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a1 ]--- ------------[ cut here ]------------ WARNING: CPU: 0 PID: 2049 at drivers/media/v4l2-core/videobuf2-core.c:1095 vb2_buffer_done+0x1e0/0x224() Modules linked in: CPU: 0 PID: 2049 Comm: vpif_capture Tainted: G W 3.14.0-rc5-00414-ged97a6f #89 [<c000e3f0>] (unwind_backtrace) from [<c000c618>] (show_stack+0x10/0x14) [<c000c618>] (show_stack) from [<c001adb0>] (warn_slowpath_common+0x68/0x88) [<c001adb0>] (warn_slowpath_common) from [<c001adec>] (warn_slowpath_null+0x1c/0x24) [<c001adec>] (warn_slowpath_null) from [<c0252c28>] (vb2_buffer_done+0x1e0/0x224) [<c0252c28>] (vb2_buffer_done) from [<c0252e3c>] (__vb2_queue_cancel+0x1d0/0x218) [<c0252e3c>] (__vb2_queue_cancel) from [<c02533a4>] (vb2_queue_release+0x14/0x24) [<c02533a4>] (vb2_queue_release) from [<c025a65c>] (vpif_release+0x60/0x230) [<c025a65c>] (vpif_release) from [<c023fe5c>] (v4l2_release+0x34/0x74) [<c023fe5c>] (v4l2_release) from [<c00b4a00>] (__fput+0x80/0x224) [<c00b4a00>] (__fput) from [<c00341e8>] (task_work_run+0xa0/0xd0) [<c00341e8>] (task_work_run) from [<c001cc28>] (do_exit+0x244/0x918) [<c001cc28>] (do_exit) from [<c001d344>] (do_group_exit+0x48/0xdc) [<c001d344>] (do_group_exit) from [<c0029894>] (get_signal_to_deliver+0x2a0/0x5bc) [<c0029894>] (get_signal_to_deliver) from [<c000b888>] (do_signal+0x78/0x3a0) [<c000b888>] (do_signal) from [<c000bc54>] (do_work_pending+0xa4/0xb4) [<c000bc54>] (do_work_pending) from [<c00096dc>] (work_pending+0xc/0x20) ---[ end trace 5faa75e8c2f8a6a2 ]--- Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-15[media] s5p-fimc: Fix YUV422P depthNicolas Dufresne
All YUV 422 has 16bit per pixels. Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-15[media] s5c73m3: Add missing rename of v4l2_of_get_next_endpoint() functionSylwester Nawrocki
This fixes following build error: CC drivers/media/i2c/s5c73m3/s5c73m3-core.o CC drivers/md/dm-ioctl.o CC net/ipv4/inet_lro.o drivers/media/i2c/s5c73m3/s5c73m3-core.c: In function ‘s5c73m3_get_platform_data’: drivers/media/i2c/s5c73m3/s5c73m3-core.c:1619:2: error: implicit declaration of function ‘v4l2_of_get_next_endpoint’ [-Werror=implicit-function-declaration] drivers/media/i2c/s5c73m3/s5c73m3-core.c:1619:10: warning: assignment makes pointer from integer without a cast [enabled by default] Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-15[media] rtl28xxu: silence error log about disabled rtl2832_sdr moduleAntti Palosaari
It printed a little bit too heavy looking error log "DVB: Unable to find symbol rtl2832_sdr_attach()" when staging module was disabled. Silence that error by introducing own version of dvb_attach() macro without the error logging. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-15[media] rtl28xxu: do not hard depend on staging SDR moduleAntti Palosaari
RTL2832 SDR extension module is currently on staging. SDR module headers were included from staging causing direct dependency staging directory. As a solution, add needed headers to main driver. Motivation of that change comes from Luis / driver backports project. Reported-by: Luis R. Rodriguez <mcgrof@do-not-panic.com> Cc: backports@vger.kernel.org Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-08[media] gpsca: remove the risk of a division by zeroMauro Carvalho Chehab
As reported by Coverity, there's a potential risk of a division by zero on some calls to jpeg_set_qual(), if quality is zero. As quality can't be 0 or lower than that, adds an extra clause to cover this special case. Coverity reports: CID#11922280, CID#11922293, CID#11922295 Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-08[media] stk1160: warrant a NUL terminated stringMauro Carvalho Chehab
strncpy() doesn't warrant a NUL terminated string. Use strlcpy() instead. Fixes Coverity bug CID#1195195. Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-07[media] v4l: ti-vpe: retain v4l2_buffer flags for captured buffersArchit Taneja
The dequed CAPTURE_MPLANE type buffers don't contain the flags that the originally queued OUTPUT_MPLANE type buffers have. This breaks compliance. Copy the source v4l2_buffer flags to the destination v4l2_buffer flags before they are dequed. Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-07[media] v4l: ti-vpe: Set correct field parameter for output and capture buffersArchit Taneja
The vpe driver wasn't setting the correct field parameter for dequed CAPTURE type buffers for the case where the captured output is progressive. Set the field to V4L2_FIELD_NONE for the completed destination buffers when the captured output is progressive. For OUTPUT type buffers, a queued buffer's field is forced to V4L2_FIELD_NONE if the pixel format(configured through s_fmt for the buffer type V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE specifies) the field type isn't interlaced. If the pixel format specified was V4L2_FIELD_ALTERNATE, and the queued buffer's field isn't V4L2_FIELD_TOP or V4L2_FIELD_BOTTOM, the vb2 buf_prepare op returns an error. This ensures compliance, and that the dequeued output and captured buffers contain the field type that the driver used internally. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-07[media] v4l: ti-vpe: zero out reserved fields in try_fmtArchit Taneja
Zero out the reserved formats in v4l2_pix_format_mplane and v4l2_plane_pix_format members of the returned v4l2_format pointer when passed through TRY_FMT ioctl. This ensures that the user doesn't interpret the non-zero fields as some data passed by the driver, and ensures compliance. Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-07[media] v4l: ti-vpe: Fix initial configuration queue dataArchit Taneja
The vpe output and capture queues are initially configured to default values in vpe_open(). A G_FMT before any S_FMTs will result in these values being populated. The colorspace and bytesperline parameter of this initial configuration are incorrect. This breaks compliance when as we get 'TRY_FMT(G_FMT) != G_FMT'. Fix the initial queue configuration such that it wouldn't need to be fixed by try_fmt. Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-07[media] v4l: ti-vpe: Use correct bus_info name for the device in querycapArchit Taneja
The bus_info parameter in v4l2_capabilities expects a 'platform_' prefix. This wasn't done in the driver and hence was breaking compliance. Update the bus_info parameter accordingly. Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-07[media] v4l: ti-vpe: report correct capabilities in querycapArchit Taneja
querycap currently returns V4L2_CAP_VIDEO_M2M as a capability, this should be V4L2_CAP_VIDEO_M2M_MPLANE instead, as the driver supports multiplanar formats. Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-07[media] v4l: ti-vpe: Allow usage of smaller imagesArchit Taneja
The minimum width and height for VPE input/output was kept as 128 pixels. VPE doesn't have a constraint on the image height, it requires the image width to be at least 16 bytes. Change the minimum supported dimensions to 32x32. This allows us to de-interlace qcif content. A smaller image size than 32x32 didn't make much sense, so stopped at this. Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-07[media] v4l: ti-vpe: Use video_device_release_emptyArchit Taneja
The video_device struct is currently embedded in the driver data struct vpe_dev. A vpe_dev instance is allocated by the driver, and the memory for the vfd is a part of this struct. The v4l2 core, however, manages the removal of the vfd region, through the video_device's .release() op, which currently is the helper video_device_release. This causes memory corruption, and leads to issues when we try to re-insert the vpe module. Use the video_device_release_empty helper function instead. Reviewed-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-07[media] v4l: ti-vpe: Make sure in job_ready that we have the needed number ↵Archit Taneja
of dst_bufs VPE has a ctrl parameter which decides how many mem to mem transactions the active job from the job queue can perform. The driver's job_ready() made sure that the number of ready source buffers are sufficient for the job to execute successfully. But it didn't make sure if there are sufficient ready destination buffers in the capture queue for the VPE output. If the time taken by VPE to process a single frame is really slow, then it's possible that we don't need to imply such a restriction on the dst queue, but really fast transactions(small resolution, no de-interlacing) may cause us to hit the condition where we don't have any free buffers for the VPE to write on. Add the extra check in job_ready() to make sure we have the sufficient amount of destination buffers. Acked-by: Kamil Debski <k.debski@samsung.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-07[media] lgdt3305: include sleep functionality in lgdt3304_opsShuah Khan
Add sleep ops to lgdt3304_ops to invoke lgdt3305_sleep() to be called from dvb_frontend_suspend(). lgdt3305_soft_reset() is called for both 3304 and 3305 devices. soft_reset and sleep touch LGDT3305_GEN_CTRL_3 on 3304 and 3305 devices. Hence, adding sleep to lgdt3304_ops will help suspend 3304 properly from dvb_frontend_suspend(). Signed-off-by: Shuah Khan <shuah.kh@samsung.com> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-07[media] drx-j: use customise option correctlyPaul Bolle
The Kconfig entry for "Micronas DRX-J demodulator" defaults to modular if DVB_FE_CUSTOMISE is set. But that Kconfig symbol was replaced with MEDIA_SUBDRV_AUTOSELECT as of v3.7. So use the new symbol. And negate the logic, because MEDIA_SUBDRV_AUTOSELECT's logic is the opposite of the former logic. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-07[media] m88rs2000: fix sparse static warningsMalcolm Priestley
fix the following warnings: m88rs2000.c:300:16: warning: symbol 'm88rs2000_setup' was not declared. Should it be static? m88rs2000.c:318:16: warning: symbol 'm88rs2000_shutdown' was not declared. Should it be static? m88rs2000.c:328:16: warning: symbol 'fe_reset' was not declared. Should it be static? m88rs2000.c:366:16: warning: symbol 'fe_trigger' was not declared. Should it be static? Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-07[media] r820t: fix size and init valuesBenjamin Larsson
Correct the initialization values at the start of the function and use proper variable sizes to prevent overflow. Signed-off-by: Benjamin Larsson <benjamin@southpole.se> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-06[media] rc-core: remove generic scancode filterDavid Härdeman
The generic scancode filtering has questionable value and makes it impossible to determine from userspace if there is an actual scancode hw filter present or not. So revert the generic parts. Based on a patch from James Hogan <james.hogan@imgtec.com>, but this version also makes sure that only the valid sysfs files are created in the first place. Signed-off-by: David Härdeman <david@hardeman.nu> Acked-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-06[media] rc-core: split dev->s_filterDavid Härdeman
Overloading dev->s_filter to do two different functions (set wakeup filters and generic hardware filters) makes it impossible to tell what the hardware actually supports, so create a separate dev->s_wakeup_filter and make the distinction explicit. Signed-off-by: David Härdeman <david@hardeman.nu> Acked-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-06[media] rc-core: do not change 32bit NEC scancode format for nowDavid Härdeman
This reverts 18bc17448147e93f31cc9b1a83be49f1224657b2 and changes the code at img-ir-nec.c to use the order used by the other NEC decoders. The original patch ignored the fact that NEC32 scancodes are generated not only in the NEC raw decoder but also directly in some drivers. Whichever approach is chosen it should be consistent across drivers and this patch needs more discussion. Furthermore, I'm convinced that we have to stop playing games trying to decipher the "meaning" of NEC scancodes (what's the customer/vendor/address, which byte is the MSB, etc). Signed-off-by: David Härdeman <david@hardeman.nu> Acked-by: James Hogan <james.hogan@imgtec.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-06[media] rtl28xxu: remove duplicate ID 0458:707f Genius TVGo DVB-T03Antti Palosaari
That ID was added twice mistakenly. 1st commit ac298ccdde4fe9b0a966e548a232ff4e8a6b8a31 2nd commit 1c1b8734094551eb4075cf68cf76892498c0da61 Revert commit 1c1b8734094551eb4075cf68cf76892498c0da61 Reported-by: Jan Vcelak <jv@fcelda.cz> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-06[media] xc2028: add missing break to switchAntti Palosaari
Coverity CID 1196501: Missing break in switch (MISSING_BREAK) I introduced that bug recently by commit 96a5b3a869e3dc7d55bf04a48a8dca8a4025787e. As a result, it will flood unintentionally error message to log. Reported-by: <scan-admin@coverity.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-04-05Merge branch 'topic/exynos' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull exynos media updates from Mauro Carvalho Chehab: "These are the remaining patches I have for the merge windows. It basically adds a new sensor and adds the needed DT bits for it to work" * 'topic/exynos' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] s5p-fimc: Remove reference to outdated macro [media] s5p-jpeg: Fix broken indentation in jpeg-regs.h [media] exynos4-is: Add the FIMC-IS ISP capture DMA driver [media] exynos4-is: Add support for asynchronous subdevices registration [media] exynos4-is: Add clock provider for the SCLK_CAM clock outputs [media] exynos4-is: Use external s5k6a3 sensor driver [media] V4L: s5c73m3: Add device tree support [media] V4L: Add driver for s5k6a3 image sensor [media] Documentation: devicetree: Update Samsung FIMC DT binding [media] Documentation: dt: Add binding documentation for S5C73M3 camera [media] Documentation: dt: Add binding documentation for S5K6A3 image sensor
2014-04-04Merge branch 'v4l_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: "The main set of series of patches for media subsystem, including: - document RC sysfs class - added an API to setup scancode to allow waking up systems using the Remote Controller - add API for SDR devices. Drivers are still on staging - some API improvements for getting EDID data from media inputs/outputs - new DVB frontend driver for drx-j (ATSC) - one driver (it913x/it9137) got removed, in favor of an improvement on another driver (af9035) - added a skeleton V4L2 PCI driver at documentation - added a dual flash driver (lm3646) - added a new IR driver (img-ir) - added an IR scancode decoder for the Sharp protocol - some improvements at the usbtv driver, to allow its core to be reused. - added a new SDR driver (rtl2832u_sdr) - added a new tuner driver (msi001) - several improvements at em28xx driver to fix PM support, device removal and to split the V4L2 specific bits into a separate sub-driver - one driver got converted to videobuf2 (s2255drv) - the e4000 tuner driver now follows an improved binding model - some fixes at V4L2 compat32 code - several fixes and enhancements at videobuf2 code - some cleanups at V4L2 API documentation - usual driver enhancements, new board additions and misc fixups" [ NOTE! This merge effective drops commit 4329b93b283c ("of: Reduce indentation in of_graph_get_next_endpoint"). The of_graph_get_next_endpoint() function was moved and renamed by commit fd9fdb78a9bf ("[media] of: move graph helpers from drivers/media/v4l2-core to drivers/of"). It was originally called v4l2_of_get_next_endpoint() and lived in the file drivers/media/v4l2-core/v4l2-of.c. In that original location, it was then fixed to support empty port nodes by commit b9db140c1e46 ("[media] v4l: of: Support empty port nodes"), and that commit clashes badly with the dropped "Reduce intendation" commit. I had to choose one or the other, and decided that the "Support empty port nodes" commit was more important ] * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (426 commits) [media] em28xx-dvb: fix PCTV 461e tuner I2C binding Revert "[media] em28xx-dvb: fix PCTV 461e tuner I2C binding" [media] em28xx: fix PCTV 290e LNA oops [media] em28xx-dvb: fix PCTV 461e tuner I2C binding [media] m88ds3103: fix bug on .set_tone() [media] saa7134: fix WARN_ON during resume [media] v4l2-dv-timings: add module name, description, license [media] videodev2.h: add parenthesis around macro arguments [media] saa6752hs: depends on CRC32 [media] si4713: fix Kconfig dependencies [media] Sensoray 2255 uses videobuf2 [media] adv7180: free an interrupt on failure paths in init_device() [media] e4000: make VIDEO_V4L2 dependency optional [media] af9033: Don't export functions for the hardware filter [media] af9035: use af9033 PID filters [media] af9033: implement PID filter [media] rtl2832_sdr: do not use dynamic stack allocation [media] e4000: fix 32-bit build error [media] em28xx-audio: make sure audio is unmuted on open() [media] DocBook media: v4l2_format_sdr was renamed to v4l2_sdr_format ...
2014-04-02Merge branch 'x86-x32-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull compat time conversion changes from Peter Anvin: "Despite the branch name this is really neither an x86 nor an x32-specific patchset, although it the implementation of the discussions that followed the x32 security hole a few months ago. This removes get/put_compat_timespec/val() and replaces them with compat_get/put_timespec/val() which are savvy as to the current status of COMPAT_USE_64BIT_TIME. It removes several unused and/or incorrect/misleading functions (like compat_put_timeval_convert which doesn't in fact do any conversion) and also replaces several open-coded implementations what is now called compat_convert_timespec() with that function" * 'x86-x32-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: compat: Fix sparse address space warnings compat: Get rid of (get|put)_compat_time(val|spec)
2014-04-01Merge tag 'staging-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver updates from Greg KH: "Here's the huge drivers/staging/ update for 3.15-rc1. Loads of cleanup fixes, a few drivers removed, and some new ones added. All have been in linux-next for a while" * tag 'staging-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (1375 commits) staging: xillybus: XILLYBUS_PCIE depends on PCI_MSI staging: xillybus: Added "select CRC32" for XILLYBUS in Kconfig staging: comedi: poc: remove obsolete driver staging: unisys: replace kzalloc/kfree with UISMALLOC/UISFREE staging: octeon-usb: prevent memory corruption staging: usbip: fix line over 80 characters staging: usbip: fix quoted string split across lines Staging: unisys: Remove RETINT macro Staging: unisys: Remove FAIL macro Staging: unisys: Remove RETVOID macro Staging: unisys: Remove RETPTR macro Staging: unisys: Remove RETBOOL macro Staging: unisys: Remove FAIL_WPOSTCODE_1 macro Staging: unisys: Cleanup macros to get rid of goto statements Staging: unisys: include: Remove unused macros from timskmod.h staging: dgap: fix the rest of the checkpatch warnings in dgap.c Staging: bcm: Remove unnecessary parentheses staging: wlags49_h2: Delete unnecessary braces staging: wlags49_h2: Do not use assignment in if condition staging: wlags49_h2: Enclose macro in a do-while loop ...
2014-04-01Merge tag 'driver-core-3.15-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core and sysfs updates from Greg KH: "Here's the big driver core / sysfs update for 3.15-rc1. Lots of kernfs updates to make it useful for other subsystems, and a few other tiny driver core patches. All have been in linux-next for a while" * tag 'driver-core-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (42 commits) Revert "sysfs, driver-core: remove unused {sysfs|device}_schedule_callback_owner()" kernfs: cache atomic_write_len in kernfs_open_file numa: fix NULL pointer access and memory leak in unregister_one_node() Revert "driver core: synchronize device shutdown" kernfs: fix off by one error. kernfs: remove duplicate dir.c at the top dir x86: align x86 arch with generic CPU modalias handling cpu: add generic support for CPU feature based module autoloading sysfs: create bin_attributes under the requested group driver core: unexport static function create_syslog_header firmware: use power efficient workqueue for unloading and aborting fw load firmware: give a protection when map page failed firmware: google memconsole driver fixes firmware: fix google/gsmi duplicate efivars_sysfs_init() drivers/base: delete non-required instances of include <linux/init.h> kernfs: fix kernfs_node_from_dentry() ACPI / platform: drop redundant ACPI_HANDLE check kernfs: fix hash calculation in kernfs_rename_ns() kernfs: add CONFIG_KERNFS sysfs, kobject: add sysfs wrapper for kernfs_enable_ns() ...
2014-03-31[media] em28xx-dvb: fix PCTV 461e tuner I2C bindingAntti Palosaari
Add missing m88ts2022 module reference counts as removing that module is not allowed when it is used by em28xx-dvb module. That same module was not unregistered correctly, fix it too. Error cases validated by returning errors from m88ds3103, m88ts2022 and a8293 probe(). Signed-off-by: Antti Palosaari <crope@iki.fi> Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-31Revert "[media] em28xx-dvb: fix PCTV 461e tuner I2C binding"Mauro Carvalho Chehab
The first hunk of this patch got merged wrong, likely due to some changes at the em28xx resume code. Revert it to reapply it right. This reverts commit 37571b163c15831cd0a213151c21387363dbf15b. Reported-by: Chris Lee <updatelee@gmail.com> Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Cc: stable@vger.kernel.org # Don't apply this patch or 37571b163c15 Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-28[media] em28xx: fix PCTV 290e LNA oopsAntti Palosaari
Pointer to device state has been moved to different location during some change. PCTV 290e LNA function still uses old pointer, carried over FE priv, and it crash. Reported-by: Janne Kujanpää <jikuja@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-28[media] em28xx-dvb: fix PCTV 461e tuner I2C bindingAntti Palosaari
Add missing m88ts2022 module reference counts as removing that module is not allowed when it is used by em28xx-dvb module. That same module was not unregistered correctly, fix it too. Error cases validated by returning errors from m88ds3103, m88ts2022 and a8293 probe(). Signed-off-by: Antti Palosaari <crope@iki.fi> Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-28[media] m88ds3103: fix bug on .set_tone()Antti Palosaari
Band switching didn't worked always reliably as there was one register bit set wrong. Thanks to Robert Schlabbach for pointing this bug and solution. Reported-by: Robert Schlabbach <Robert.Schlabbach@gmx.net> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-28[media] saa7134: fix WARN_ON during resumeHans Verkuil
Do not attempt to reload the tuner modules when resuming after a suspend. This triggers a WARN_ON in kernel/kmod.c:148 __request_module. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=69581. This has always been wrong, but it was never noticed until the WARN_ON was added in 3.9. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org # for v3.9 and up Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-28[media] v4l2-dv-timings: add module name, description, licenseHans Verkuil
I completely forgot to add them when I made this module. Loading this module without it will taint the kernel, which is not intended. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: stable@vger.kernel.org # for v3.12 and up Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-28[media] saa6752hs: depends on CRC32Hans Verkuil
Have saa6752hs select CRC32. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-28[media] si4713: fix Kconfig dependenciesHans Verkuil
The SI4713 select should be I2C_SI4713 and the USB driver needs to depend on I2C as well. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Reported-by: Paul Bolle <pebolle@tiscali.nl> Reported-by: Richard Weinberger <richard@nod.at> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-24[media] Sensoray 2255 uses videobuf2Arnd Bergmann
commit 340a30c514 "s2255drv: upgrade to videobuf2" changed the API used by the s2255 driver, but did not modify the Kconfig statement, which can lead to build errors when no other driver already uses VIDEOBUF2_VMALLOC. This patch does the necessary Kconfig change. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>