summaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2012-09-21Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: Essentially just flush my -fixes queue before I head off to xdc. - gen2 regression fixer, we've enabled the lvds stuff too late. Not causing any known issues, but this restores the sequence before a refactor that landed in 3.5, and lvds is a fickle beast. And seriously, who runs gen2 still ... - downgrade a BUG to a WARN - we haven't root-caused/fixed the underlying issue yet, but this should help bug reporters quite a bit. - properly disable hdmi audio - we've lost track of this, which resulted in the alsa driver again losing track of the unplug event. * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: HDMI - Clear Audio Enable bit for Hot Plug drm/i915: Reduce a pin-leak BUG into a WARN drm/i915: enable lvds pin pairs before dpll on gen2
2012-09-21drm/nouveau: add dmi quirk for gpio resetDave Airlie
This fixes the gpio reset problem so the Retina MBP works, but avoids breaking the Dell systems. Ben will work on a better solution for 3.7. Tested by me on retina MBP. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-21Merge branch 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes fixes a resume regression on pre-r6xx asics. * 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: Prevent leak of scratch register on resume from suspend
2012-09-20drm/radeon: Prevent leak of scratch register on resume from suspendSimon Kitching
Cards typically have 5-7 scratch registers; one of these is reserved for rdev->rptr_save_reg. Unfortunately the reservation is done in function r100_cp_init, which is called by all drivers except r600 - and this function is also invoked on resume from suspend. After several resumes, no scratch registers are free and graphics acceleration is disabled. Dmesg then reports either: *ERROR* radeon: cp failed to get scratch reg (-22). *ERROR* radeon: cp isn't working(-22). radeon 0000:01:00.0: failed initializing CP (-22). or: *ERROR* radeon: failed to get scratch reg (-22). *ERROR* radeon: failed testing IB on GFX ring (-22). *ERROR* ib ring test failed (-22). The chain of calls on boot for all except r600 is: radeon_init -> ... -> (rXXX_init) -> rXXX_startup -> r100_cp_init The chain of calls on resume for all except r600 is: rXXX_resume -> rXXX_startup -> r100_cp_init. R600 correctly allocates rptr_save_reg in r600_init (ie once only, not in resume). However moving the code into the init functions for all drivers means touching 4 drivers. So instead, this patch just adds a test in r100_cp_init to avoid reallocating on resume. As the rdev structure is allocated via kzalloc in radeon_driver_load_kms, and zero is not a valid registerid, zero safely implies not-yet-allocated. This issue appears to have been introduced in c7eff978 (3.6.0-rcN) Signed-off-by: Simon Kitching <skitching@vonos.net> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-09-20Revert "drm/nv50-/gpio: initialise to vbios defaults during init"Dave Airlie
This reverts commit 991083ba60f89e717e3a4175be96d48a810e9eae. We discovered this causes problem on some Dell eDP laptops, so Apple lose out for now, I might try and whip up a dmi based workaround for 3.6 but I'm not sure I'll get time. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-17Revert "drm/radeon: rework pll selection (v3)"Alex Deucher
This reverts commit 985f61f7ee647ad570c05eab0b74915da2ac8e19. This commit fixed certain cases, but ended up regressing others due to limitations in the current KMS API. A proper fix is too invasive for 3.6. Push it back to 3.7. Reported-by: Andres Freund <andres@anarazel.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-09-17drm/i915: HDMI - Clear Audio Enable bit for Hot PlugWang Xingchao
Clear Audio Enable bit to trigger unsolicated event to notify Audio Driver part the HDMI hot plug change. The patch fixed the bug when remove HDMI cable the bit was not cleared correctly. In intel_hdmi_dpms(), if intel_hdmi->has_audio been true, the "Audio enable bit" will be set to trigger unsolicated event to notify Alsa driver the change. intel_hdmi->has_audio will be reset to false from intel_hdmi_detect() after remove the hdmi cable, here's debug log: [ 187.494153] [drm:output_poll_execute], [CONNECTOR:17:HDMI-A-1] status updated from 1 to 2 [ 187.525349] [drm:intel_hdmi_detect], HDMI: has_audio = 0 so when comes back to intel_hdmi_dpms(), the "Audio enable bit" will not be cleared. And this cause the eld infomation and pin presence doesnot update accordingly in alsa driver side. This patch will also trigger unsolicated event to alsa driver to notify the hot plug event: [ 187.853159] ALSA sound/pci/hda/patch_hdmi.c:772 HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1 [ 187.853268] ALSA sound/pci/hda/patch_hdmi.c:990 HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 Signed-off-by: Wang Xingchao <xingchao.wang@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-17drm/i915: Reduce a pin-leak BUG into a WARNChris Wilson
Pin-leaks persist and we get the perennial bug reports of machine lockups to the BUG_ON(pin_count==MAX). If we instead loudly report that the object cannot be pinned at that time it should prevent the driver from locking up, and hopefully restore a semblance of working whilst still leaving us a OOPS to debug. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-17drm/i915: enable lvds pin pairs before dpll on gen2Daniel Vetter
Otherwise things migt not work too well. Breakage introduced in commit eb1cbe4848b01f9f073064377875bc7d71eb401b Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Mar 28 23:12:16 2012 +0200 drm/i915: split PLL update code out of i9xx_crtc_mode_set Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: stable@vger.kernel.org (for 3.5 only) Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-14drm/nouveau: fix booting with plymouth + dumb supportDave Airlie
We noticed a plymouth bug on Fedora 18, and I then noticed this stupid thinko, fixing it fixed the problem with plymouth. Cc: stable@vger.kernel.org Acked-by: Ben Skeggs <bskeggs@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13drm/radeon: make 64bit fences more robust v3Christian König
Only increase the higher 32bits if we really detect a wrap around. v2: instead of increasing the higher 32bits just use the higher 32bits from the last emitted fence. v3: also use last emitted fence value as upper limit. The intention of this patch is to make fences as robust as they where before introducing 64bit fences. This is necessary because on older systems it looks like the fence value gets corrupted on initialization. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=51344 Should also fix: https://bugs.freedesktop.org/show_bug.cgi?id=54129 https://bugs.freedesktop.org/show_bug.cgi?id=54662 https://bugzilla.redhat.com/show_bug.cgi?id=846505 https://bugzilla.redhat.com/show_bug.cgi?id=845639 3.5 needs a separate patch due to changes in the fence code. Will send that out separately. Signed-off-by: Christian König <deathsimple@vodafone.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-09-13drm/radeon: rework pll selection (v3)Alex Deucher
For DP we can use the same PPLL for all active DP encoders. Take advantage of that to prevent cases where we may end up sharing a PPLL between DP and non-DP which won't work. Also clean up the code a bit. v2: - fix missing pll_id assignment in crtc init v3: - fix DP PPLL check - document functions - break in main encoder search loop after matching. no need to keep checking additional encoders. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=54471 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-09-13Merge branch 'exynos-drm-fixes' of ↵Dave Airlie
git://git.infradead.org/users/kmpark/linux-samsung into drm-fixes Inki Dae writes: - fix build warnings - minor code cleanup - remove non-standard format, DRM_FORMAT_NV12M - add dummy mmap for exynos dmabuf . dma_buf export needs this patch * 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung: drm: Drop the NV12M and YUV420M formats drm/exynos: remove DRM_FORMAT_NV12M from plane module drm/exynos: fix double call of drm_prime_(init/destroy)_file_private drm/exynos: add dummy support for dmabuf-mmap drm/exynos: Add missing braces around sizeof in exynos_mixer.c drm/exynos: Add missing braces around sizeof in exynos_hdmi.c drm/exynos: Make g2d_pm_ops static drm/exynos: Add dependency for G2D in Kconfig drm/exynos: fixed page align bug. drm/exynos: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1] drm/exynos: Use devm_* functions in exynos_drm_g2d.c file drm/exynos: Use devm_kzalloc in exynos_drm_hdmi.c file drm/exynos: Use devm_kzalloc in exynos_drm_vidi.c file drm/exynos: Remove redundant check in exynos_drm_fimd.c file drm/exynos: Remove redundant check in exynos_hdmi.c file
2012-09-13drm/exynos: remove DRM_FORMAT_NV12M from plane moduleInki Dae
this patch removes DRM_FORMAT_NV12M from plane module because this format is same as DRM_FORMAT_NV12. DRM_FORMAT_NV12M will be identified by mode_cmd->handles and mode_cmd->offsets fields internally. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin.park <kyungmin.park@samsung.com>
2012-09-13drm/exynos: fix double call of drm_prime_(init/destroy)_file_privateMandeep Singh Baines
The double invocations are incorrect but seem to be safe so I don't think this will fix any bugs. Before: [ 7.639366] drm_prime_init_file ee3675d0 [ 7.639377] drm_prime_init_file ee3675d0 [ 7.639507] drm_prime_destroy_file ee3675d0 [ 7.639518] drm_prime_destroy_file ee3675d0 [ 7.639802] drm_prime_init_file ee372390 [ 7.639810] drm_prime_init_file ee372390 [ 8.473316] drm_prime_init_file ee356390 [ 8.473331] drm_prime_init_file ee356390 After: [ 6.363842] drm_prime_init_file edc2e5d0 [ 6.363994] drm_prime_destroy_file edc2e5d0 [ 6.364260] drm_prime_init_file edc2e750 [ 8.004837] drm_prime_init_file ee36ded0 Signed-off-by: Mandeep Singh Baines <msb@chromium.org> Acked-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13drm/exynos: add dummy support for dmabuf-mmapTomasz Stanislawski
This patch adds a stub function for DMABUF mmap. This allows to export a DMABUF. Signed-off-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-09-13drm/exynos: Add missing braces around sizeof in exynos_mixer.cSachin Kamat
Fixes the following checkpatch warnings: WARNING: sizeof filter_y_horiz_tap8 should be sizeof(filter_y_horiz_tap8) WARNING: sizeof filter_y_vert_tap4 should be sizeof(filter_y_vert_tap4) WARNING: sizeof filter_cr_horiz_tap4 should be sizeof(filter_cr_horiz_tap4) Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13drm/exynos: Add missing braces around sizeof in exynos_hdmi.cSachin Kamat
Fixes the following checkpatch warnings: WARNING: sizeof *res should be sizeof(*res) WARNING: sizeof res->regul_bulk[0] should be sizeof(res->regul_bulk[0]) WARNING: sizeof *res should be sizeof(*res) Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13drm/exynos: Make g2d_pm_ops staticSachin Kamat
Fixes the following warning: drivers/gpu/drm/exynos/exynos_drm_g2d.c:897:1: warning: symbol 'g2d_pm_ops' was not declared. Should it be static? Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13drm/exynos: Add dependency for G2D in KconfigSachin Kamat
Select Exynos DRM based G2D only if non-DRM based Exynos G2D driver is not selected. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-09-13drm/exynos: fixed page align bug.Inki Dae
do not align in page unit at dumb creation. the align is done by exynos_drm_gem_create() to be called commonly. Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13drm/exynos: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1]Thomas Meyer
The semantic patch that makes this change is available in scripts/coccinelle/api/err_cast.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13drm/exynos: Use devm_* functions in exynos_drm_g2d.c fileSachin Kamat
devm_* functions are device managed functions and make error handling and cleanup cleaner and simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13drm/exynos: Use devm_kzalloc in exynos_drm_hdmi.c fileSachin Kamat
devm_kzalloc is a device managed function and makes freeing and error handling simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13drm/exynos: Use devm_kzalloc in exynos_drm_vidi.c fileSachin Kamat
devm_kzalloc is a device managed function and makes freeing and error handling simpler. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13drm/exynos: Remove redundant check in exynos_drm_fimd.c fileSachin Kamat
devm_request_and_ioremap function checks the validity of the pointer returned by platform_get_resource. Hence an additional check in the probe function is not necessary. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13drm/exynos: Remove redundant check in exynos_hdmi.c fileSachin Kamat
devm_request_and_ioremap function checks the validity of the pointer returned by platform_get_resource. Hence an additional check in the probe function is not necessary. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-09-13vmwgfx: add dumb ioctl supportDave Airlie
Testing and works with the -modesetting driver, Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13gma500: Fix regression on Oaktrail devicesAlan Cox
The register map patches didn't set one value for the GMA600 which means the Fujitsu Q550 dies on boot with the GMA500 driver enabled. Add the map entry so we don't read from the device MMIO + 0 by mistake. Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: Horses <stable@vger.kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-13Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: "Nothing really major at all: - fixup edp setup sequence (Dave) - disable sdvo hotplug for real, this is a fixup for a messed-up regression fixer (Jani) - don't expose dysfunctional backlight driver (Jani) - properly init spinlock (only used by hsw/vlv code) from Alexander Shishkin" along with a couple of more fixes on top. * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: fix up the IBX transcoder B check drm/i915: set the right gen3 flip_done mode also at resume drm/i915: initialize dpio_lock spin lock drm/i915: do not expose a dysfunctional backlight interface to userspace drm/i915: only enable sdvo hotplug irq if needed drm/i915/edp: get the panel delay before powering up
2012-09-11drm/i915: fix up the IBX transcoder B checkDaniel Vetter
This has been added in commit de9a35abb3b343a25065449234e47a76c4f3454a Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Tue Jun 5 11:03:40 2012 +0200 drm/i915: assert that the IBX port transcoder select w/a is implemented Unfortunately I've failed to notice that these checks are not just called for the port that is about to be disabled, but for all (which makes sense for an assert ...), and the WARN missfired when disabling another pipe than the one with the dp port. Hence also check whether the port is actually disabled. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54688 Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-10drm/i915: set the right gen3 flip_done mode also at resumeDaniel Vetter
Currently we've only frobbed this bit at irq_init time, but did not restore it at resume time. Move it to the gen3 clock gating function to fix this. Notice while reading through code. Cc: stable@vger.kernel.org (for 3.5 only) Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-08drm/i915: initialize dpio_lock spin lockAlexander Shishkin
This thing is killing lockdep. Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> [Jani: move the init next to the other spin lock inits] Signed-off-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-07drm/vmwgfx: add MODULE_DEVICE_TABLE so vmwgfx loads at bootDave Airlie
This will cause udev to load vmwgfx instead of waiting for X to do it. Reviewed-by: Jakob Bornecrantz <jakob@vmware.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-07drm/vmwgfx: allow a kconfig option to choose if fbcon is enabledDave Airlie
This makes things easier for distros where we'd like to have fbcon enabled all the time. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-06drm: use drm_compat_ioctl for 32-bit appsKeith Packard
Most of the DRM drivers appear to be missing the .compat_ioctl file operation entry necessary for 32-bit application compatibility. This patch uses drm_compat_ioctl for all drivers which don't have their own, and which are using drm_ioctl for .unlocked_ioctl. This leaves drivers/gpu/drm/psb/psb_drv.c unchanged; it has a custom .unlocked_ioctl and will presumably need a custom .compat_ioctl as well. Signed-off-by: Keith Packard <keithp@keithp.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
2012-09-03drm/i915: do not expose a dysfunctional backlight interface to userspaceJani Nikula
Previously intel_panel_setup_backlight() would create a sysfs backlight interface with max brightness of 1 if it was unable to figure out the max backlight brightness. This rendered the backlight interface useless. Do not create a dysfunctional backlight interface to begin with. Signed-off-by: Jani Nikula <jani.nikula@intel.com> Tested-by: David Woodhouse <David.Woodhouse@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03drm/i915: only enable sdvo hotplug irq if neededJani Nikula
Avoid constant wakeups caused by noisy irq lines when we don't even care about the irq. This should be particularly useful for i945g/gm where the hotplug has been disabled: commit 768b107e4b3be0acf6f58e914afe4f337c00932b Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri May 4 11:29:56 2012 +0200 drm/i915: disable sdvo hotplug on i945g/gm v2: While at it, remove the bogus hotplug_active read, and do not mask hotplug_active[0] before checking whether the irq is needed, per discussion with Daniel on IRC. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=38442 Tested-by: Dominik Köppl <dominik@devwork.org> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03drm/i915/edp: get the panel delay before powering upDave Airlie
In order to setup the i2c channel, we power up the panel via ironlake_edp_panel_vdd_on, however it requires intel_dp->panel_power_up_delay to be initialised, which hasn't been setup yet. So move things around so we set the panel power up values first then init the i2c stuff. This is one step to fixing the eDP panel in the MBP from uninitialised state. Signed-off-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-09-03drm/ast: drop debug level on error printkDave Airlie
This was never an error, drop to a debug print. Reported-by: Keven Lachance Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-09-02Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie
git://anongit.freedesktop.org/nouveau/linux-2.6 into drm-fixes These two fix the MacBook Pro 2012 Retina display. * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/nouveau/linux-2.6: drm/nv50-/gpio: initialise to vbios defaults during init drm/nvd0/disp: hopefully fix selection of 6/8bpc mode on DP outputs
2012-08-31drm/nv50-/gpio: initialise to vbios defaults during initBen Skeggs
This is required to fix an issue on the Retina MBP where the eDP panel's AUX channel isn't wired up to the HPD pin for the panel, causing our aux code to bail out early. From looking at various traces of the binary driver, it appears NVIDIA do something very similar on at least all nv50+ chipsets during their initialisation sequence. So, hopefully this is safe. Issue and fix initially tracked down by Ryan Bourgeois on fdo#51971. Backported fix from reworked nouveau kernel module. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-31drm/nvd0/disp: hopefully fix selection of 6/8bpc mode on DP outputsBen Skeggs
I have a very limited number of traces available for DP on NVD9+, but, these values produce the same as the binary driver on a confirmed 18-bit eDP panel and a confirmed 24-bit eDP panel (Retina MBP). It's interesting that the bitfield values also match the MODE_CTRL values that control the same thing on nv50:nvd9. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-08-30drm: Add EDID_QUIRK_FORCE_REDUCED_BLANKING for ASUS VW222SPaul Menzel
Connecting an ASUS VW222S [1] over VGA a garbled screen is shown with vertical stripes in the top half. In commit bc42aabc [2] commit bc42aabc6a01b92b0f961d65671564e0e1cd7592 Author: Adam Jackson <ajax@redhat.com> Date: Wed May 23 16:26:54 2012 -0400 drm/edid/quirks: ViewSonic VA2026w Adam Jackson added the quirk `EDID_QUIRK_FORCE_REDUCED_BLANKING` which is also needed for this ASUS monitor. All log files and output from `xrandr` is included in the referenced Bugzilla report #17629. Please note that this monitor only has a VGA (D-Sub) connector [1]. [1] http://www.asus.com/Display/LCD_Monitors/VW222S/ [2] http://git.kernel.org/?p=linux/kernel/git/torvalds/linux.git;a=commit;h=bc42aabc6a01b92b0f961d65671564e0e1cd7592 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=17629 Signed-off-by: Paul Menzel <paulepanter@users.sourceforge.net> Cc: <dri-devel@lists.freedesktop.org> Cc: Adam Jackson <ajax@redhat.com> Cc: Ian Pilcher <arequipeno@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-30Merge branch 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Alex writes: Highlights: - fix a gart regression on older IGP chips - more MSAA fixes - fix a double free in gpu reset code - modesetting fixes - trinity dig encoder fix. * 'drm-fixes-3.6' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix dig encoder selection on DCE61 drm/radeon: fix double free in radeon_gpu_reset drm/radeon: force dma32 to fix regression rs4xx,rs6xx,rs740 drm/radeon: rework panel mode setup drm/radeon/atom: powergating fixes for DCE6 drm/radeon/atom: rework DIG modesetting on DCE3+ drm/radeon: don't disable plls that are in use by other crtcs drm/radeon: add proper checking of RESOLVE_BOX command for r600-r700 drm/radeon: initialize tracked CS state drm/radeon: fix reading CB_COLORn_MASK from the CS
2012-08-30gma500: Consider CRTC initially active.Forest Bond
[this one ideally should make 3.6 - it fixes the very annoying mode setting bug] This causes the pipe to be forced off prior to initial mode set, which roughly mirrors the behavior of the i915 driver. It fixes initial mode setting on my Intel DN2800MT (Cedarview) board. Without it, mode setting triggers an out-of-range error from the monitor for most modes, but only on initial configuration (i.e. they can be configured successfully from userspace after that). Signed-off-by: Forest Bond <forest.bond@rapidrollout.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-08-29drm/radeon: fix dig encoder selection on DCE61Alex Deucher
Was using the DCE41 code which was wrong. Fixes blank displays on a number of Trinity systems. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2012-08-29drm/radeon: fix double free in radeon_gpu_resetChristian König
radeon_ring_restore is freeing the memory for the saved ring data. We need to remember that, otherwise we try to restore the ring data again on the next try. Additional to that it shouldn't try the reset infinitely if we have saved ring data. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29drm/radeon: force dma32 to fix regression rs4xx,rs6xx,rs740Jerome Glisse
It seems some of those IGP dislike non dma32 page despite what documentation says. Fix regression since we allowed non dma32 pages. It seems it only affect some revision of those IGP chips as we don't know which one just force dma32 for all of them. https://bugzilla.redhat.com/show_bug.cgi?id=785375 Signed-off-by: Jerome Glisse <jglisse@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2012-08-29drm/radeon: rework panel mode setupAlex Deucher
Adjust the panel mode setup to match the behavior of the vbios. Rather than checking for specific bridge chip ids, just check the eDP configuration register. This saves extra aux transactions and works across DP bridge chips without requiring additional per chip id checking. Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-17 15:58:57 +0000