summaryrefslogtreecommitdiffstats
path: root/drivers/gpu
AgeCommit message (Collapse)Author
2012-01-25drm/radeon: avoid deadlock if GPU lockup is detected in ib_pool_getJerome Glisse
If GPU lockup is detected in ib_pool get we are holding the ib_pool mutex that will be needed by the GPU reset code. As ib_pool code is safe to be reentrant from GPU reset code we should not block if we are trying to get the ib pool lock on the behalf of the same userspace caller, thus use the radeon_mutex_lock helper. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-25drm/radeon: silence out possible lock dependency warningJerome Glisse
Silence out the lock dependency warning by moving bo allocation out of ib mutex protected section. Might lead to useless temporary allocation but it's not harmful as such things only happen at initialization. Signed-off-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-25drm: Fix authentication kernel crashThomas Hellstrom
If the master tries to authenticate a client using drm_authmagic and that client has already closed its drm file descriptor, either wilfully or because it was terminated, the call to drm_authmagic will dereference a stale pointer into kmalloc'ed memory and corrupt it. Typically this results in a hard system hang. This patch fixes that problem by removing any authentication tokens (struct drm_magic_entry) open for a file descriptor when that file descriptor is closed. Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-24drm/i915: debugfs: show semaphore registers also on gen7Daniel Vetter
Corresponding changes to improve our error_state are pending some other patches to clean up things first. Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-24drm/i915: allow userspace forcewake references also on gen7Daniel Vetter
We need this to correctly access registers in the gt power well from userspace. Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-24drm/i915: Re-enable gen7 RC6 and GPU turbo after resume.Eric Anholt
Signed-off-by: Eric Anholt <eric@anholt.net> Cc: stable@vger.kernel.org Reviewed-by: Keith Packard <keithp@keithp.com> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-24drm/i915: Correct debugfs printout for RC1e.Eric Anholt
We had two things in a row claiming to be RC6. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Keith Packard <keithp@keithp.com> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-24gma500: Fix shmem mappingAlan Cox
GMA500 did it the old way and it's been on the TODO list to fix. Current kernels now blow up if we use the old way so we'd better do the work ! Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-24drm/radeon/kms: refine TMDS dual link checksAlex Deucher
HDMI 1.3 defines single link clocks up to 340 Mhz. Refine the current dual link checks to only enable dual link for DVI > 165 Mhz or HDMI > 340 Mhz if the hw supports HDMI 1.3 (DCE3+). Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=44755 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-24drm/radeon/kms: use drm_detect_hdmi_monitor for picking encoder modeAlex Deucher
We were previously just checking for audio. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-24drm/radeon/kms: rework modeset sequence for DCE41 and DCE5Alex Deucher
dig transmitter control table only has ENABLE/DISABLE actions on DCE4.1/DCE5. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=44955 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-24drm/radeon/kms: move panel mode setup into encoder mode setAlex Deucher
Needs to happen earlier in the mode set. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-24drm/radeon/kms: move disp eng pll setup to init pathAlex Deucher
We really only need to set it up once on init or resume rather than on every mode set. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-24drm/radeon: finish getting bios earlierIgor Murzov
Return a number of bytes read in radeon_atrm_get_bios_chunk() and properly check this value in radeon_atrm_get_bios(). If radeon_atrm_get_bios_chunk() read less bytes then were requested, it means that it finished reading bios data. Prior to this patch, condition in radeon_atrm_get_bios() was always equivalent to "if (ATRM_BIOS_PAGE <= 0)", so it was always false, thus radeon_atrm_get_bios() was trying to read past the bios data wasting boot time. On my lenovo ideapad u455 laptop this patch drops bios reading time from ~5.5s to ~1.5s. Signed-off-by: Igor Murzov <e-mail@date.by> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-24drm/radeon: fix invalid memory access in radeon_atrm_get_bios()Igor Murzov
At a boot time I observed following bug: BUG: unable to handle kernel paging request at ffff8800a4244000 IP: [<ffffffff81275b5b>] memcpy+0xb/0x120 PGD 1816063 PUD 1fe7d067 PMD 1ff9f067 PTE 80000000a4244160 Oops: 0000 [#1] SMP DEBUG_PAGEALLOC CPU 0 Modules linked in: btusb bluetooth brcmsmac brcmutil crc8 cordic b43 radeon(+) mac80211 cfg80211 ttm ohci_hcd drm_kms_helper rfkill drm ssb agpgart mmc_core sp5100_tco video battery ac thermal processor rtc_cmos thermal_sys snd_hda_codec_hdmi joydev snd_hda_codec_conexant button bcma pcmcia snd_hda_intel snd_hda_codec snd_hwdep snd_pcm shpchp pcmcia_core k8temp snd_timer atl1c snd psmouse hwmon i2c_piix4 i2c_algo_bit soundcore evdev i2c_core ehci_hcd sg serio_raw snd_page_alloc loop btrfs Pid: 1008, comm: modprobe Not tainted 3.3.0-rc1 #21 LENOVO 20046 /AMD CRB RIP: 0010:[<ffffffff81275b5b>] [<ffffffff81275b5b>] memcpy+0xb/0x120 RSP: 0018:ffff8800aa72db00 EFLAGS: 00010246 RAX: ffff8800a4150000 RBX: 0000000000001000 RCX: 0000000000000087 RDX: 0000000000000000 RSI: ffff8800a4244000 RDI: ffff8800a4150bc8 RBP: ffff8800aa72db78 R08: 0000000000000010 R09: ffffffff8174bbec R10: ffffffff812ee010 R11: 0000000000000001 R12: 0000000000001000 R13: 0000000000010000 R14: ffff8800a4140000 R15: ffff8800aaba1800 FS: 00007ff9a3bd4720(0000) GS:ffff8800afa00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: ffff8800a4244000 CR3: 00000000a9c18000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process modprobe (pid: 1008, threadinfo ffff8800aa72c000, task ffff8800aa0e4000) Stack: ffffffffa04e7c7b 0000000000000001 0000000000010000 ffff8800aa72db28 ffffffff00000001 0000000000001000 ffffffff8113cbef 0000000000000020 ffff8800a4243420 ffff880000000002 ffff8800aa72db08 ffff8800a9d42000 Call Trace: [<ffffffffa04e7c7b>] ? radeon_atrm_get_bios_chunk+0x8b/0xd0 [radeon] [<ffffffff8113cbef>] ? kmalloc_order_trace+0x3f/0xb0 [<ffffffffa04a9298>] radeon_get_bios+0x68/0x2f0 [radeon] [<ffffffffa04c7a30>] rv770_init+0x40/0x280 [radeon] [<ffffffffa047d740>] radeon_device_init+0x560/0x600 [radeon] [<ffffffffa047ef4f>] radeon_driver_load_kms+0xaf/0x170 [radeon] [<ffffffffa043cdde>] drm_get_pci_dev+0x18e/0x2c0 [drm] [<ffffffffa04e7e95>] radeon_pci_probe+0xad/0xb5 [radeon] [<ffffffff81296c5f>] local_pci_probe+0x5f/0xd0 [<ffffffff81297418>] pci_device_probe+0x88/0xb0 [<ffffffff813417aa>] ? driver_sysfs_add+0x7a/0xb0 [<ffffffff813418d8>] really_probe+0x68/0x180 [<ffffffff81341be5>] driver_probe_device+0x45/0x70 [<ffffffff81341cb3>] __driver_attach+0xa3/0xb0 [<ffffffff81341c10>] ? driver_probe_device+0x70/0x70 [<ffffffff813400ce>] bus_for_each_dev+0x5e/0x90 [<ffffffff8134172e>] driver_attach+0x1e/0x20 [<ffffffff81341298>] bus_add_driver+0xc8/0x280 [<ffffffff813422c6>] driver_register+0x76/0x140 [<ffffffff812976d6>] __pci_register_driver+0x66/0xe0 [<ffffffffa043d021>] drm_pci_init+0x111/0x120 [drm] [<ffffffff8133c67a>] ? vga_switcheroo_register_handler+0x3a/0x60 [<ffffffffa0229000>] ? 0xffffffffa0228fff [<ffffffffa02290ec>] radeon_init+0xec/0xee [radeon] [<ffffffff810002f2>] do_one_initcall+0x42/0x180 [<ffffffff8109d8d2>] sys_init_module+0x92/0x1e0 [<ffffffff815407a9>] system_call_fastpath+0x16/0x1b Code: 58 2a 43 50 88 43 4e 48 83 c4 08 5b c9 c3 66 90 e8 cb fd ff ff eb e6 90 90 90 90 90 90 90 90 90 48 89 f8 89 d1 c1 e9 03 83 e2 07 <f3> 48 a5 89 d1 f3 a4 c3 20 48 83 ea 20 4c 8b 06 4c 8b 4e 08 4c RIP [<ffffffff81275b5b>] memcpy+0xb/0x120 RSP <ffff8800aa72db00> CR2: ffff8800a4244000 ---[ end trace fcffa1599cf56382 ]--- Call to acpi_evaluate_object() not always returns 4096 bytes chunks, on my system it can return 2048 bytes chunk, so pass the length of retrieved chunk to memcpy(), not the length of the recieving buffer. Signed-off-by: Igor Murzov <e-mail@date.by> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-23drm/radeon/kms: add some missing semaphore initAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-23drm/radeon/kms: Add an MSI quirk for Dell RS690Alex Deucher
Interrupts only work with MSIs. https://bugs.freedesktop.org/show_bug.cgi?id=37679 Reported-by: Dmitry Podgorny <pasis.uax@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-23gpu, drm, sis: Don't return uninitialized variable from sis_driver_load()Jesper Juhl
In sis_driver_load(), the only use of 'ret' is as the return value from the function, unfortunately it is never initialized, so the function just returns garbage when it succeeds. To fix that, remove the variable and just return 0 directly on success. Signed-off-by: Jesper Juhl <jj@chaosbits.net> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-20Revert "drm/i915: Work around gen7 BLT ring synchronization issues."Keith Packard
This reverts commit 42ff6572e5a4a7414330a4ca91f0335da67deca9. New forcewake voodoo makes this no longer necessary. Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-19drm/i915: rip out the HWSTAM missed irq workaroundDaniel Vetter
With the new ducttape of much finer quality, this seems to be no longer necessary. Tested on my ivb and snb machine with the usual suspects of testcases. (v2 by keithp -- limited change to IVB only for now) Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-19drm/i915: paper over missed irq issues with force wake voodooDaniel Vetter
Two things seem to do the trick on my ivb machine here: - prevent the gt from powering down while waiting for seqno notification interrupts by grabbing the force_wake in get_irq (and dropping it in put_irq again). - ordering writes from the ring's CS by reading a CS register, ACTHD seems to work. Only the blt&bsd ring on ivb seem to be massively affected by this, but for paranoia do this dance also on the render ring and on snb (i.e. all gpus with forcewake). Tested with Eric's glCopyPixels loop which without this patch scores a missed irq every few seconds. This patch needs my forcewake rework to use a spinlock instead of dev->struct_mutex. After crawling through docs a lot I've found the following nugget: Internal doc "SNB GT PM Programming Guide", Section 4.3.1: "GT does not generate interrupts while in RC6 (by design)" So it looks like rc6 and irq generation are indeed related. v2: Improve the comment per Eugeni Dodonov's suggestion. v3: Add the documentation snipped. Also restrict the w/a to ivb only for -fixes, as suggested by Keith Packard. Cc: stable@kernel.org Cc: Eric Anholt <eric@anholt.net> Cc: Kenneth Graunke <kenneth@whitecape.org> Cc: Eugeni Dodonov <eugeni.dodonov@intel.com> Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-19drm/i915: Hold gt_lock across forcewake register readsKeith Packard
Along with the previous patch to make the reset operation protected by the gt_lock as well, this ensures that all register read operations will occur with the forcewake hardware enabled. As an added bonus, this makes read operations more efficient by taking the spinlock only once per read instead of twice. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-01-19drm/i915: Hold gt_lock during resetKeith Packard
This ensures that no register reads occur while the forcewake state of the hardware is indeterminate during the reset operation. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-01-19drm/i915: Move reset forcewake processing to gen6_do_resetKeith Packard
No reason to have half of the reset split from the other half. Signed-off-by: Keith Packard <keithp@keithp.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-01-19drm/i915: protect force_wake_(get|put) with the gt_lockDaniel Vetter
The problem this patch solves is that the forcewake accounting necessary for register reads is protected by dev->struct_mutex. But the hangcheck and error_capture code need to access registers without grabbing this mutex because we hold it while waiting for the gpu. So a new lock is required. Because currently the error_state capture is called from the error irq handler and the hangcheck code runs from a timer, it needs to be an irqsafe spinlock (note that the registers used by the irq handler (neglecting the error handling part) only uses registers that don't need the forcewake dance). We could tune this down to a normal spinlock when we rework the error_state capture and hangcheck code to run from a workqueue. But we don't have any read in a fastpath that needs forcewake, so I've decided to not care much about overhead. This prevents tests/gem_hangcheck_forcewake from i-g-t from killing my snb on recent kernels - something must have slightly changed the timings. On previous kernels it only trigger a WARN about the broken locking. v2: Drop the previous patch for the register writes. v3: Improve the commit message per Chris Wilson's suggestions. Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-13drm/i915: convert force_wake_get to func pointer in the gpu reset codeDaniel Vetter
This was forgotten in the original multi-threaded forcewake conversion: commit 8d715f0024f64ad1b1be85d8c081cf577944c847 Author: Keith Packard <keithp at keithp.com> Date: Fri Nov 18 20:39:01 2011 -0800 drm/i915: add multi-threaded forcewake support Signed-Off-by: Daniel Vetter <daniel.vetter at ffwll.ch> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-13drm/i915: sprite init failure on pre-SNB is not a failureJesse Barnes
We can call the plane init function unconditionally, but don't need to complain if it fails, since that will only happen if we're out of memory (and other things will fail) or if we're on the wrong platform (which is ok). And remove the DRM_ERRORs from the sprite code itself to avoid dmesg spam. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-13drm/i915: VBT Parser cleanup for eDP blockRohit Jain
Support for parsing parameters for S3D support and T3 optimization support is implemented. The order for the bdb_edp struct was also made similar to that indicated in spec. Signed-off-by: Rohit Jain <rohit.jain@intel.com> Reviewed-by: Shobhit Kumar <shobhit.kumar@intel.com> Reviewed-by: Vijay A. Purushothaman <vijay.a.purushothaman@intel.com> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Acked-by: Jesse Barnes <jesse.barnes@intel.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-13nouveau: Support Optimus models for vga_switcherooPeter Lekensteyn
Newer nVidia cards with Optimus do not support/use the DSM switching functions. Instead, it require a DSM function to be called prior to bringing a device into D3 state. No other _DSM calls are necessary before/after enabling/disabling a device. Switching between discrete and integrated GPU is not supported by this Optimus _DSM call, therefore return on the switching method. Signed-off-by: Peter Lekensteyn <lekensteyn@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-13nouveau: properly check for _DSM function supportPeter Lekensteyn
According to the ACPI spec version 4, section 9.14.1, _DSM functions must return a value with the first bit enabled if any DSM functions are supported for the given UUID and revision ID. For a given function index n to be marked supported, bit n must be enabled. Signed-off-by: Peter Lekensteyn <lekensteyn@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-13radeon: Call pci_clear_master() instead of open-coding it.Michel Dänzer
Reported-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: Michel Dänzer <michel.daenzer@amd.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-13gma500: Discard modes that don't fit in stolen memoryAlan Cox
[This fixes a crash on boot if the system is plugged into an HDTV so it's probably appropriate to push even though it didn't make the window. We could be cleverer about this but the simple version seems to be the safe one] From: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> At the moment we cannot allocate more than stolen memory size for framebuffers. To get around that issues we discard modes that doesn't fit. This is a temporary solution until we can freely allocate framebuffer memory. [Currently the framebuffer needs to be linear in kernel space due to limits in the kernel fb layer - AC] Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-13drm/radeon/kms: Fix module parameter description formatJean Delvare
Module parameter descriptions don't take a trailing \n, otherwise it breaks formatting of modinfo's output. Also add missing space after comma. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: David Airlie <airlied@linux.ie> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-13drm/radeon/kms/ni: fix packet2 handling for VM IB parserAlex Deucher
Packet2 is only one dword. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-13ttm/dma: Remove the WARN() which is not useful.Konrad Rzeszutek Wilk
. It was useful during development, but now on a production system we can get this (if the user forgot to upload the firmware): [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 [drm] radeon: ib pool ready. [drm] Loading SUMO Microcode r600_cp: Failed to load firmware "radeon/SUMO_pfp.bin" atl1c 0000:03:00.0: version 1.0.1.0-NAPI.213057] [drm:evergreen_startup] *ERROR* Failed to load firmware! radeon 0000:00:01.0: disabling GPU acceleration 88] radeon 0000:00:01.0: ffff8801bb782400 unpin not necessary ------------[ cut here ]------------ WARNING: at /home/konrad/linux-linus/drivers/gpu/drm/ttm/ttm_page_alloc_dma.c:956 ttm_dma_unpopulate+0x79/0x300 [ttm]() Hardware name: System Product Name Modules linked in: e1000e atl1c radeon(+) ahci libahci libata scsi_mod fbcon tileblit font ttm bitblit softcursor drm_kms_helper wmi xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect syscopyarea xenfs xen_privcmd Pid: 1600, comm: modprobe Not tainted 3.2.0-06100-ge343a89 #1 Call Trace: [<ffffffff8108973a>] warn_slowpath_common+0x7a/0xb0 [<ffffffff81089785>] warn_slowpath_null+0x15/0x20 [<ffffffffa0060309>] ttm_dma_unpopulate+0x79/0x300 [ttm] [<ffffffffa01341c0>] radeon_ttm_tt_unpopulate+0x120/0x130 [radeon] [<ffffffffa0056e0c>] ttm_tt_destroy+0x2c/0x70 [ttm] [<ffffffffa0057a4e>] ttm_bo_cleanup_memtype_use+0x3e/0x80 [ttm] [<ffffffffa00595a1>] ttm_bo_release+0x251/0x280 [ttm] [<ffffffffa0059610>] ttm_bo_unref+0x40/0x60 [ttm] [<ffffffffa0134d02>] radeon_bo_unref+0x42/0x80 [radeon] [<ffffffffa0186dfb>] radeon_sa_bo_manager_fini+0x6b/0x80 [radeon] [<ffffffffa0146b8f>] radeon_ib_pool_fini+0x6f/0x90 [radeon] [<ffffffffa014be49>] r100_ib_fini+0x19/0x20 [radeon] [<ffffffffa017b47e>] evergreen_init+0x1ee/0x2d0 [radeon] The big WARN() has nothing to do with the culprit - which is that the firmware was not loaded. So lets remove the WARN() from the TTM DMA code. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-12drm/i915: mask transcoder select bits before setting them on LVDSJesse Barnes
The transcoder port may changed from mode set to mode set, so make sure to mask out the selection bits before setting the right ones or we'll get black screens when going from transcoder B to A. Tested-by: Vincent Vanackere <vincent.vanackere@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-12Merge branch 'drm-intel-next-fixes' into drm-intel-fixesKeith Packard
2012-01-12drm/i915: Add Clientron E830 to the ignore LVDS listJoel Sass
Signed-off-by: Joel Sass <jsass@disklessworkstations.com> Reviewed-by: Adam Jackson <ajax@redhat.com> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-12CHROMIUM: i915: Add DMI override to skip CRT initialization on ZGBDuncan Laurie
This is the method used to override LVDS in intel_lvds and appears to be an effective way to ensure that the driver does not enable VGA hotplug. This is the same patch from 2.6.32 kernel in R12 but ported to 2.6.38, will send upstream next. Signed-off-by: Duncan Laurie <dlaurie@chromium.org> BUG=chrome-os-partner:117 TEST=Check PORT_HOTPLUG_EN to see if hotplug interrupt is disabled. Run the following command as root, specifically looking at bit 9: mmio_read32 $[$(pci_read32 0 2 0 0x10) + 0x61110] = 0x00000000 Change-Id: Id8240f9fb31d058d8d79ee72f7b4615c43893f5a Reviewed-on: http://gerrit.chromium.org/gerrit/1390 Reviewed-by: Olof Johansson <olofj@chromium.org> Tested-by: Duncan Laurie <dlaurie@chromium.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-10Merge branch 'drm-core-next' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
* 'drm-core-next' of git://people.freedesktop.org/~airlied/linux: (307 commits) drm/nouveau/pm: fix build with HWMON off gma500: silence gcc warnings in mid_get_vbt_data() drm/ttm: fix condition (and vs or) drm/radeon: double lock typo in radeon_vm_bo_rmv() drm/radeon: use after free in radeon_vm_bo_add() drm/sis|via: don't return stack garbage from free_mem ioctl drm/radeon/kms: remove pointless CS flags priority struct drm/radeon/kms: check if vm is supported in VA ioctl drm: introduce drm_can_sleep and use in intel/radeon drivers. (v2) radeon: Fix disabling PCI bus mastering on big endian hosts. ttm: fix agp since ttm tt rework agp: Fix multi-line warning message whitespace drm/ttm/dma: Fix accounting error when calling ttm_mem_global_free_page and don't try to free freed pages. drm/ttm/dma: Only call set_pages_array_wb when the page is not in WB pool. drm/radeon/kms: sync across multiple rings when doing bo moves v3 drm/radeon/kms: Add support for multi-ring sync in CS ioctl (v2) drm/radeon: GPU virtual memory support v22 drm: make DRM_UNLOCKED ioctls with their own mutex drm: no need to hold global mutex for static data drm/radeon/benchmark: common modes sweep ignores 640x480@32 ... Fix up trivial conflicts in radeon/evergreen.c and vmwgfx/vmwgfx_kms.c
2012-01-10drm/nouveau/pm: fix build with HWMON offDave Airlie
Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-10gma500: silence gcc warnings in mid_get_vbt_data()Dan Carpenter
Add a cast here to silence a Gcc warning. drivers/gpu/drm/gma500/mid_bios.c:214:28: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-10drm/ttm: fix condition (and vs or)Dan Carpenter
The "if (!p && !p->dev)" condition isn't right because || was intended instead of &&. But actually, "p" is the list cursor and so it's always non-NULL and we can just remove that bit. We can remove the another similar check as well. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-09drm/i915: handle 3rd pipeEugeni Dodonov
We don't need to check 3rd pipe specifically, as it shares PLL with some other one. Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-09drm/i915: simplify pipe checkingEugeni Dodonov
This is also handled by i915_reg.h, so just reuse this trick to reduce universe entropy. Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Cyril Brulebois <kibi@debian.org> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-09drm/i915: Print debugfs object list sizes in KiB instead of bytes.Eric Anholt
They're all in increments of pages, so this just makes it easier on the eyes. Signed-off-by: Eric Anholt <eric@anholt.net> Signed-off-by: Keith Packard <keithp@keithp.com>
2012-01-09drm/radeon: double lock typo in radeon_vm_bo_rmv()Dan Carpenter
The second lock should be an unlock or it causes a deadlock. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-09drm/radeon: use after free in radeon_vm_bo_add()Dan Carpenter
"bo_va" is dereferenced in the error message. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-09drm/sis|via: don't return stack garbage from free_mem ioctlDaniel Vetter
Fallout from my "kill drm_sman" refactor. Unfortunately gcc seems to have failed me and not warned about this. Tested-by: Jakob Bornecrantz <wallbraker@gmail.com> (on via) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-01-09drm/radeon/kms: check if vm is supported in VA ioctlAlex Deucher
Add a VM manager enabled field and use it to check if vm is enabled. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: jglisse@redhat.com Signed-off-by: Dave Airlie <airlied@redhat.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-27 03:16:40 +0000