summaryrefslogtreecommitdiffstats
path: root/drivers/block/skd_main.c
AgeCommit message (Collapse)Author
2016-06-27block: convert to device_add_disk()Dan Williams
For block drivers that specify a parent device, convert them to use device_add_disk(). This conversion was done with the following semantic patch: @@ struct gendisk *disk; expression E; @@ - disk->driverfs_dev = E; ... - add_disk(disk); + device_add_disk(E, disk); @@ struct gendisk *disk; expression E1, E2; @@ - disk->driverfs_dev = E1; ... E2 = disk; ... - add_disk(E2); + device_add_disk(E1, E2); ...plus some manual fixups for a few missed conversions. Cc: Jens Axboe <axboe@fb.com> Cc: Keith Busch <keith.busch@intel.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: David S. Miller <davem@davemloft.net> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Cc: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2016-06-07block, drivers: add REQ_OP_FLUSH operationMike Christie
This adds a REQ_OP_FLUSH operation that is sent to request_fn based drivers by the block layer's flush code, instead of sending requests with the request->cmd_flags REQ_FLUSH bit set. Signed-off-by: Mike Christie <mchristi@redhat.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-25skd: remove broken discard supportJeff Moyer
Simply creating a file system on an skd device, followed by mount and fstrim will result in errors in the logs and then a BUG(). Let's remove discard support from that driver. As far as I can tell, it hasn't worked right since it was merged. This patch also has a side-effect of cleaning up an unintentional shadowed declaration inside of skd_end_request. I tested to ensure that I can still do I/O to the device using xfstests ./check -g quick. I didn't do anything more extensive than that, though. Signed-off-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2016-04-12skd_main: switch to using blk_queue_write_cache()Jens Axboe
Signed-off-by: Jens Axboe <axboe@fb.com> Reviewed-by: Christoph Hellwig <hch@lst.de>
2016-04-12block: add offset in blk_add_request_payload()Ming Lin
We could kmalloc() the payload, so need the offset in page. Signed-off-by: Ming Lin <ming.l@ssi.samsung.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-07-17block: have drivers use blk_queue_max_discard_sectors()Jens Axboe
Some drivers use it now, others just set the limits field manually. But in preparation for splitting this into a hard and soft limit, ensure that they all call the proper function for setting the hw limit for discards. Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-10-04block: disable entropy contributions for nonrot devicesMike Snitzer
Clear QUEUE_FLAG_ADD_RANDOM in all block drivers that set QUEUE_FLAG_NONROT. Historically, all block devices have automatically made entropy contributions. But as previously stated in commit e2e1a148 ("block: add sysfs knob for turning off disk entropy contributions"): - On SSD disks, the completion times aren't as random as they are for rotational drives. So it's questionable whether they should contribute to the random pool in the first place. - Calling add_disk_randomness() has a lot of overhead. There are more reliable sources for randomness than non-rotational block devices. From a security perspective it is better to err on the side of caution than to allow entropy contributions from unreliable "random" sources. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2014-08-12PCI: Remove DEFINE_PCI_DEVICE_TABLE macro useBenoit Taine
We should prefer `struct pci_device_id` over `DEFINE_PCI_DEVICE_TABLE` to meet kernel coding style guidelines. This issue was reported by checkpatch. A simplified version of the semantic patch that makes this change is as follows (http://coccinelle.lip6.fr/): // <smpl> @@ identifier i; declarer name DEFINE_PCI_DEVICE_TABLE; initializer z; @@ - DEFINE_PCI_DEVICE_TABLE(i) + const struct pci_device_id i[] = z; // </smpl> [bhelgaas: add semantic patch] Signed-off-by: Benoit Taine <benoit.taine@lip6.fr> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2014-08-08block: use pci_zalloc_consistentJoe Perches
Remove the now unnecessary memset too. Signed-off-by: Joe Perches <joe@perches.com> Mike Miller <mike.miller@hp.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-05-28Merge branch 'for-3.16/core' into for-3.16/driversJens Axboe
mtip32xx uses blk_mq_alloc_reserved_request(), so pull in the core changes so we have a properly merged end result. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-21skd: Use pci_enable_msix_exact() instead of pci_enable_msix_range()Alexander Gordeev
Function pci_enable_msix_exact() is a variation of pci_enable_msix_range() that allows a device driver to request a particular number of MSI-X interrupts, rather than any number within a specified range. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: linux-pci@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-16sd/skd: stuff discard page in request->completion_dataJens Axboe
Store the pointer to the page there, so we can always safely reference it from end_io context where ->bio may have been cleared. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-04-15block: remove struct request buffer memberJens Axboe
This was used in the olden days, back when onions were proper yellow. Basically it mapped to the current buffer to be transferred. With highmem being added more than a decade ago, most drivers map pages out of a bio, and rq->buffer isn't pointing at anything valid. Convert old style drivers to just use bio_data(). For the discard payload use case, just reference the page in the bio. Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-21skd: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: linux-pci@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-21skd: Use unified access to skdev->msix_entries throughout the codeAlexander Gordeev
Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: linux-pci@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-21skd: Fix incomplete cleanup of MSI-X interruptAlexander Gordeev
When enabling MSI-X interrupts fails due to lack of memory the call to pci_disable_msix() is missed and the device is left with MSI-X interrupts enabled while the driver assumes otherwise. This update fixes the described misbehaviour and cleans up the code of skd_release_msix() function. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: linux-pci@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-21skd: Fix out of array boundary accessAlexander Gordeev
When enabling MSI-X, interrupts are requested for SKD_MAX_MSIX_COUNT entries in skdev->msix_entries array, while the number of actually allocated entries is skdev->msix_count. This might lead to an out of boundary access in case number of allocated entries is less than SKD_MAX_MSIX_COUNT. This update fixes the described misbehaviour. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: linux-pci@vger.kernel.org Signed-off-by: Jens Axboe <axboe@fb.com>
2013-12-19drivers: block: Mark the functions as static in skd_main.cRashika Kheria
Mark functions skd_skmsg_state_to_str() and skd_skreq_state_to_str() as static in skd_main.c because they are not used outside this file. This eliminates the following warnings in skd_main.c: drivers/block/skd_main.c:5272:13: warning: no previous prototype for ‘skd_skmsg_state_to_str’ [-Wmissing-prototypes] drivers/block/skd_main.c:5284:13: warning: no previous prototype for ‘skd_skreq_state_to_str’ [-Wmissing-prototypes] Signed-off-by: Rashika Kheria <rashika.kheria@gmail.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-11-08skd: reorder construct/destruct codeBartlomiej Zolnierkiewicz
Reorder placement of skd_construct(), skd_cons_sg_list(), skd_destruct() and skd_free_sg_list() functions. Then remove no longer needed function prototypes. Cc: Akhil Bhansali <abhansali@stec-inc.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-11-08skd: cleanup skd_do_inq_page_da()Bartlomiej Zolnierkiewicz
skdev->pdev and skdev->pdev->bus are always different than NULL in skd_do_inq_page_da() so simplify the code accordingly. Also cache skdev->pdev value in pdev variable while at it. Cc: Akhil Bhansali <abhansali@stec-inc.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-11-08skd: remove redundant skdev->pdev assignment from skd_pci_probe()Bartlomiej Zolnierkiewicz
skdev->pdev is set to pdev twice in skd_pci_probe(), first time through skd_construct() call and the second time directly in the function. Remove the second assignment as it is not needed. Cc: Akhil Bhansali <abhansali@stec-inc.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-11-08skd: use <asm/unaligned.h>Bartlomiej Zolnierkiewicz
Use <asm/unaligned.h> instead of <asm-generic/unaligned.h>. Cc: Akhil Bhansali <abhansali@stec-inc.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-11-08skd: remove SCSI subsystem specific includesBartlomiej Zolnierkiewicz
This is not a SCSI host driver so remove SCSI subsystem specific includes. Cc: Akhil Bhansali <abhansali@stec-inc.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-11-08skd: register block device only if some devices are presentBartlomiej Zolnierkiewicz
Register block device in skd_pci_probe() instead of in skd_init() so it is registered only if some devices are present (currently it is always registered when the driver is loaded). Please note that this change depends on the fact that register_blkdev(0, ...) never returns 0. Cc: Akhil Bhansali <abhansali@stec-inc.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-11-08skd: fix error messages in skd_init()Bartlomiej Zolnierkiewicz
* change priority level from KERN_INFO to KERN_ERR * add "skd: " prefix * do minor CodingStyle fixes Cc: Akhil Bhansali <abhansali@stec-inc.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-11-08skd: fix error paths in skd_init()Bartlomiej Zolnierkiewicz
Cc: Akhil Bhansali <abhansali@stec-inc.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-11-08skd: fix unregister_blkdev() placementBartlomiej Zolnierkiewicz
register_blkdev() is called before pci_register_driver() in skd_init() so unregister_blkdev() should be called after pci_unregister_driver() in skd_exit(). Fix it. Cc: Akhil Bhansali <abhansali@stec-inc.com> Cc: Jeff Moyer <jmoyer@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-11-08skd: more removal of bio-based codeMike Snitzer
Remove skd_flush_cmd structure and skd_flush_slab. Remove skd_end_request wrapper around skd_end_request_blk. Remove skd_requeue_request, use blk_requeue_request directly. Cleanup some comments (remove "bio" info) and whitespace. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-11-08skd: cleanup the skd_*() function block wrappingJens Axboe
Just call the block functions directly, don't wrap them in skd helpers. With only one queueing model enabled, there's no point in doing that. Also kill the ->start_time and ->bio from the skd_request_context, we don't use those anymore. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-11-08skd: rip out bio pathJens Axboe
The skd driver has a selectable rq or bio based queueing model. For 3.14, we want to turn this into a single blk-mq interface instead. With the immutable biovecs being merged in 3.13, the bio model would need patches to even work. So rip it out, with a conversion pending for blk-mq in the next release. Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-11-08skd: fix error return code in skd_pci_probe()Wei Yongjun
Fix to return -ENOMEM in the skd construct error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-11-08skd: Replaced custom debug PRINTKs with pr_debugrchinthekindi
Replaced DPRINTK() and VPRINTK() with pr_debug(). Signed-off-by: Ramprasad C <ramprasad.chinthekindi@hgst.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-11-08skd: Fix checkpatch ERRORS and removed unused functionsAkhil Bhansali
This patch fixes checkpatch.pl errors for assignment in if condition. It also removes unused readq / readl function calls. As Andrew had disabled the compilation of drivers for 32 bit, I have modified format specifiers in few VPRINTKs to avoid warnings during 64 bit compilation. Signed-off-by: Akhil Bhansali <abhansali@stec-inc.com> Reviewed-by: Ramprasad Chinthekindi <rchinthekindi@stec-inc.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-11-08Add support for sTec's pci-e flash card KronosAkhil Bhansali
Signed-off-by: Akhil Bhansali <abhansali@stec-inc.com> Signed-off-by: Ramprasad Chinthekindi <rchinthekindi@stec-inc.com> Reviewed-by: Jeff Moyer <jmoyer@redhat.com> Folded patch, contributions to clean up this driver from: Jens Axboe Dan Carpenter Andrew Morton Signed-off-by: Jens Axboe <axboe@kernel.dk>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-29 01:57:34 +0000