summaryrefslogtreecommitdiffstats
path: root/drivers/ata
AgeCommit message (Collapse)Author
2012-02-13pata/at91: use newly introduced SMC accessorsJean-Christophe PLAGNIOL-VILLARD
pata_at91 driver is broken since faee0cc: "make smc register base soc independent" Fix it with newly introduced SMC accessors. The overall action of removal of at91_sys_read/write will allow to use the pata_at91 on a single zImage kernel. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: linux-ide@vger.kernel.org
2012-01-17[libata] ata_piix: Add Toshiba Satellite Pro A120 to the quirks listBenjamin Larsson
due to broken suspend functionality. Signed-off-by: Benjamin Larsson <benjamin@southpole.se> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-17[libata] add DVRTD08A and DVR-215 to NOSETXFER device quirk listVladimir LAVALLADE
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-17[libata] pata_bf54x: Support sg list in bmdma transfer.Sonic Zhang
BF54x on-chip ATAPI controller allows maximum 0x1fffe bytes to be transfered in one ATAPI transfer. So, set the max sg_tablesize to 4. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-17[libata] sata_fsl: fix the controller operating modeJerry Huang
Configure the FSL SATA controller to the preferred, enterprise mode. Signed-off-by: Yutaka Ando <r46913@freescale.com> Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> CC: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-17[libata] enable ata port async suspendLin Ming
This saves devices suspend/resume time. Tested system suspend/resume with SATA IDE/AHCI mode 3 times. Below is the time took for devices suspend/resume. SATA mode vanilla-kernel patched-kernel --------- --------------------- --------------------- IDE suspend: 0.744 suspend: 0.432 (0.716, 0.768, 0.748) (0.440, 0.428, 0.428) resume: 5.084 resume: 2.209 (5.100, 5.064, 5.088) (2.168, 2.232, 2.228) AHCI: suspend: 0.725 suspend: 0.449 (0.740, 0.708, 0.728) (0.456, 0.448, 0.444) resume: 2.556 resume: 1.896 (2.604, 2.492, 2.572) (1.932, 1.872, 1.884) Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-13module_param: make bool parameters really bool (drivers & misc)Rusty Russell
module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2012-01-10Merge branch 'upstream-linus' of git://github.com/jgarzik/libata-devLinus Torvalds
* 'upstream-linus' of git://github.com/jgarzik/libata-dev: ahci: support the STA2X11 I/O Hub pata_bf54x: fix BMIDE status register emulation ata: add ata port hibernate callbacks ata: update ata port's runtime status during system resume [SCSI] runtime resume parent for child's system-resume ahci: platform support for suspend/resume libata-core: kill duplicate statement in ata_do_set_mode() pata_of_platform: remove direct dependency on OF_IRQ SATA/PATA: convert drivers/ata/* to use module_platform_driver() pata_cs5536: forward port changes from cs5536 libata-sff: use ATAPI_{COD|IO} ata: add ata port runtime PM callbacks ata: add ata port system PM callbacks [SCSI] sd: check runtime PM status in sd_shutdown [SCSI] check runtime PM status in system PM [SCSI] add flag to skip the runtime PM calls on the host ata: make ata port as parent device of scsi host ahci: start engine only during soft/hard resets
2012-01-09Merge tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
New feature development This adds support for new features, and contains stuff from most platforms. A number of these patches could have fit into other branches, too, but were small enough not to cause too much confusion here. * tag 'devel' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits) mfd/db8500-prcmu: remove support for early silicon revisions ARM: ux500: fix the smp_twd clock calculation ARM: ux500: remove support for early silicon revisions ARM: ux500: update register files ARM: ux500: register DB5500 PMU dynamically ARM: ux500: update ASIC detection for U5500 ARM: ux500: support DB8520 ARM: picoxcell: implement watchdog restart ARM: OMAP3+: hwmod data: Add the default clockactivity for I2C ARM: OMAP3: hwmod data: disable multiblock reads on MMC1/2 on OMAP34xx/35xx <= ES2.1 ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP4 ARM: OMAP: USB: EHCI and OHCI hwmod structures for OMAP3 ARM: OMAP: hwmod data: Add support for AM35xx UART4/ttyO3 ARM: Orion: Remove address map info from all platform data structures ARM: Orion: Get address map from plat-orion instead of via platform_data ARM: Orion: mbus_dram_info consolidation ARM: Orion: Consolidate the address map setup ARM: Kirkwood: Add configuration for MPP12 as GPIO ARM: Kirkwood: Recognize A1 revision of 6282 chip ARM: ux500: update the MOP500 GPIO assignments ...
2012-01-08ahci: support the STA2X11 I/O HubAlessandro Rubini
The AHCI controller found in the STA2X11 chip uses BAR number 0 instead of 5. Also, the chip's fixup code sets a special DMA mask for all of its PCI functions, and the mask must be preserved here. Signed-off-by: Alessandro Rubini <rubini@gnudd.com> Acked-by: Giancarlo Asnaghi <giancarlo.asnaghi@st.com> Cc: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08pata_bf54x: fix BMIDE status register emulationSergei Shtylyov
The author of this driver clearly wasn't familiar with the BMIDE specification (also known as SFF-8038i) when he implemented the bmdma_status() method: first, the interrupt bit of the BMIDE status register corresponds to nothing else but INTRQ signal (ATAPI_DEV_INT here); second, the error bit is only set if the controller encounters issue doing the bus master transfers, not on the IDE DMA burst termination interrupts like here (moreover, setting the error bit doesn't cause an interrupt). We now need to disable all those unused interrupts... (The only thing I couldn't figure out is how to flush the FIFO to memory once the interrupt happens as required by the mentioned spec.) Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08ata: add ata port hibernate callbacksLin Ming
Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08ata: update ata port's runtime status during system resumeLin Ming
The ata port is brought back to full power state during system resume. So its runtime PM status will have to be updated to reflect the actual post-system sleep status. This also fixes below warning during system suspend/resume. WARNING: at /work/linux/drivers/ata/libata-eh.c:4034 ata_scsi_port_error_handler+0x89/0x557() 4034 WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED)); Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08ahci: platform support for suspend/resumeBrian Norris
Add platform hooks for custom suspend() and resume() functions. The generic suspend/resume code in drivers/ata/ahci_platform.c is adapted from the PCI version in drivers/ata/ahci.c. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08libata-core: kill duplicate statement in ata_do_set_mode()Sergei Shtylyov
Commit b3a706014e56b1356e7b275fd25b833c63175bf0 (libata: Add a drivers/ide style DMA disable) neglected to remove the line in ata_do_set_mode() it has obviously made useless/duplicated. Do this now, and make a line added back then wrapped properly... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08pata_of_platform: remove direct dependency on OF_IRQRob Herring
CONFIG_OF_IRQ is not available on some platforms and using of_irq_* breaks the build. Since resources are already populated in the platform device, get the irq from there instead. Reported-by: David S. Miller <davem@davemloft.net> Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08SATA/PATA: convert drivers/ata/* to use module_platform_driver()Axel Lin
This patch converts the drivers in drivers/ata/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Viresh Kumar <viresh.kumar@st.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sylvain Munaut <tnt@246tNt.com> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: Mark Miesfeld <mmiesfeld@amcc.com> Cc: Ashish Kalra <ashish.kalra@freescale.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08pata_cs5536: forward port changes from cs5536Bartlomiej Zolnierkiewicz
* Fix cable detection to also account for the slave device cable bit. * Disable UDMA when programming MWDMA in cs5536_set_dmamode(). * Don't change UDMA settings in cs5536_set_piomode(). * Add cs5536_program_dtc() helper. * Cleanup and uninline cs5536_[read,write]() methods. Cc: Martin K. Petersen <mkp@mkp.net> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08libata-sff: use ATAPI_{COD|IO}Sergei Shtylyov
atapi_pio_bytes() uses bare numbers for the ATAPI interrupt reason bits despite these are #define'd in <linux/ata.h>. Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08ata: add ata port runtime PM callbacksLin Ming
Add ata port runtime suspend/resume/idle callbacks. Set ->eh_noresume to skip the runtime PM calls on scsi host in the error handler to avoid dead lock. Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08ata: add ata port system PM callbacksLin Ming
Change ata_host_request_pm to ata_port_request_pm which performs port suspend/resume. Add ata port type driver which implements port PM callbacks. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08ata: make ata port as parent device of scsi hostLin Ming
Currently, the device tree of ata port and scsi host looks as below, /sys/devices/pci0000:00/0000:00:1f.2 (ahci controller) |-- ata1 (ata port) |-- host0 (scsi host) |-- target0:0:0 (scsi target) |-- 0:0:0:0 (disk) This patch makes ata port as parent device of scsi host, then it becomes /sys/devices/pci0000:00/0000:00:1f.2 (ahci controller) |-- ata1 (ata port) |-- host0 (scsi host) |-- target0:0:0 (scsi target) |-- 0:0:0:0 (disk) With this change, the ata port runtime PM is easier. For example, the ata port runtime suspend will happen as, disk suspend --> scsi target suspend --> scsi host suspend --> ata port suspend. Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-08ahci: start engine only during soft/hard resetsTejun Heo
This is another attempt at fixing the same problem that 270dac35c2 (libata: ahci_start_engine compliant to AHCI spec) tried to solve. Unfortunately, 270dac35c2 created regressions for a lot more common controllers and got reverted. This specific AHCI IP block becomes a brick if the DMA engine is started while DRQ is set. It is not possible to avoid the condition completely but the most common occurrence is caused by spurious use of ahci_start_engine() from ahci_start_port() during init sequence. DMA engine is started after both soft and hard resets and ahci_start_port() is always followed by resets, so there is no reason to start DMA engine from ahci_start_port(). This patch removes ahci_start_engine() invocation from ahci_start_port(). This change makes failure path of ahci_port_suspend() leave engine stopped without following resets. This is resolved by replacing ahci_start_port() call with ata_port_freeze() which forces resets afterwards, which is the better behavior anyway. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Brian Norris <computersforpeace@gmail.com> Reported-by: Jian Peng <jipeng2005@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-07Merge branch 'depends/rmk/restart' into next/cleanupArnd Bergmann
Conflicts: arch/arm/mach-at91/at91cap9.c arch/arm/mach-at91/at91sam9260.c arch/arm/mach-at91/at91sam9261.c arch/arm/mach-at91/at91sam9263.c arch/arm/mach-at91/at91sam9g45.c arch/arm/mach-at91/at91sam9rl.c arch/arm/mach-exynos/cpu.c arch/arm/mach-shmobile/board-kota2.c This resolves a bunch of conflicts between the arm-soc tree and changes from the arm tree that have gone upstream. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-12-22pata_of_platform: Add missing CONFIG_OF_IRQ dependency.David Miller
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-12-13ARM: Orion: Get address map from plat-orion instead of via platform_dataAndrew Lunn
Use an getter function in plat-orion/addr-map.c to get the address map structure, rather than pass it to drivers in the platform_data structures. When the drivers are built for none orion platforms, a dummy function is provided instead which returns NULL. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Michael Walle <michael@walle.cc> Acked-by: Nicolas Pitre <nico@linaro.org> Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
2011-11-29ARM: at91/pata: use gpio_is_valid to check the gpioJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-11-17libata: fix build without BMDMAAlexander Beregalov
fix these errors: drivers/ata/libata-sff.c:2538:3: error: implicit declaration of function 'ata_pci_bmdma_prepare_host' drivers/ata/libata-sff.c:2549:40: error: 'ata_bmdma_interrupt' undeclared (first use in this function) Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-11-17[libata] ahci_platform: fix DT probingRob Herring
The change in commit 904c04feaf13ed "ahci_platform: Add the board_ids..." doesn't work for the DT probing case as platform_get_device_id returns NULL. Pick the default ahci_port_info in this case. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Cc: Richard Zhu <richard.zhu@linaro.org> Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-11-10pata_of_platform: Don't use NO_IRQAnton Vorontsov
Drivers should not use NO_IRQ; moreover, some architectures don't have it nowadays. '0' is the 'no irq' case. Signed-off-by: Anton Vorontsov <cbouatmailru@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-11-09[libata] ahci: Add ASMedia ASM1061 supportKeng-Yu Lin
Signed-off-by: Keng-Yu Lin <kengyu@canonical.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-11-09[libata] Issue SRST to Sil3726 PMPGwendal Grignou
Reenable sending SRST to devices connected behind a Sil3726 PMP. This allow staggered spinups and handles drives that spins up slowly. While the drives spin up, the PMP will not accept SRST. Most controller reissues the reset until the drive is ready, while some [Sil3124] returns an error. In ata_eh_error, wait 10s before reset the ATA port and try again. Signed-off-by: Gwendal Grignou <gwendal@google.com> Acked-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-11-09sata_sis.c: trivial spelling fixChris Dunlop
Trivial spelling fix. Signed-off-by: Chris Dunlop <chris@onthe.net.au> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-11-09ahci_platform: use dev_get_platdata()JiSheng Zhang
Use dev_get_platdata() to retrieve the struct ahci_platform_data data from the platform. Signed-off-by: JiSheng Zhang <jszhang3@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-11-09[libata] libata-scsi.c: Add function parameter documentationMarcos Paulo de Souza
Add the documentation of parameters of ata_change_queue_depth to silence the warning of make xmldocs Signed-off-by: Marcos paulo de Souza <marcos.mage@gmail.com> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-11-06Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-03ahci: add DT binding for Calxeda AHCI controllerRob Herring
Add devicetree match table to ahci platform driver for Calxeda Highbank AHCI controller. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@secretlab.ca> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: linux-ide@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: devicetree-discuss@lists.ozlabs.org
2011-10-31ide/ata: Add module.h to the implicit modular usersPaul Gortmaker
A pending cleanup will mean that module.h won't be implicitly everywhere anymore. Make sure the modular drivers in the ide dir are actually calling out for <module.h> explicitly in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31ide/ata: Add export.h for EXPORT_SYMBOL/THIS_MODULE where neededPaul Gortmaker
They were getting this implicitly by an include of module.h from device.h -- but we are going to clean that up and break that include chain, so include export.h explicitly now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (204 commits) [SCSI] qla4xxx: export address/port of connection (fix udev disk names) [SCSI] ipr: Fix BUG on adapter dump timeout [SCSI] megaraid_sas: Fix instance access in megasas_reset_timer [SCSI] hpsa: change confusing message to be more clear [SCSI] iscsi class: fix vlan configuration [SCSI] qla4xxx: fix data alignment and use nl helpers [SCSI] iscsi class: fix link local mispelling [SCSI] iscsi class: Replace iscsi_get_next_target_id with IDA [SCSI] aacraid: use lower snprintf() limit [SCSI] lpfc 8.3.27: Change driver version to 8.3.27 [SCSI] lpfc 8.3.27: T10 additions for SLI4 [SCSI] lpfc 8.3.27: Fix queue allocation failure recovery [SCSI] lpfc 8.3.27: Change algorithm for getting physical port name [SCSI] lpfc 8.3.27: Changed worst case mailbox timeout [SCSI] lpfc 8.3.27: Miscellanous logic and interface fixes [SCSI] megaraid_sas: Changelog and version update [SCSI] megaraid_sas: Add driver workaround for PERC5/1068 kdump kernel panic [SCSI] megaraid_sas: Add multiple MSI-X vector/multiple reply queue support [SCSI] megaraid_sas: Add support for MegaRAID 9360/9380 12GB/s controllers [SCSI] megaraid_sas: Clear FUSION_IN_RESET before enabling interrupts ...
2011-10-27Merge branch 'gpio' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits) ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h> ARM: 7104/1: plat-pxa: break out GPIO driver specifics ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h> ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h ARM: 7083/1: rewrite U300 GPIO to use gpiolib ARM: 7074/1: gpio: davinci: eliminate unused variable warnings ARM: 7063/1: Orion: gpio: add missing include of linux/types.h ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio ARM: 7057/1: mach-pnx4008: rename GPIO header ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h> ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem ARM: 7043/1: mach-ixp2000: rename GPIO header ... Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
2011-10-14pata_efar: fix register naming used in efar_set_piomode()Bartlomiej Zolnierkiewicz
Rename 'idetm_port' and 'idetm_data' variables to 'master_port' and 'master_data' respectively to match register naming used in efar_set_dmamode() and in ata_piix.c. Fix efar_set_piomode() documentation while at it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_rdc: add Power Management supportBartlomiej Zolnierkiewicz
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14ata_piix: unify code for programming PIO and MWDMA timingsBartlomiej Zolnierkiewicz
Besides making things noticably simpler it results in ~2% decrease in the driver LOC count and also ~2% decrease in the driver binary size (as measured on x86-32). Fix piix_set_piomode() documentation while at it. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14ata_piix: SITRE handling fixBartlomiej Zolnierkiewicz
Set SITRE (separate slave timing register) bit also in master-only configurations to match other PIIX-alike drivers and make further changes easier. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14libata: make ata_sff_data_xfer_noirq() work with 32-bit PIOBartlomiej Zolnierkiewicz
Always use ata_sff_data_xfer32() in ata_sff_data_xfer_noirq() so the latter can be also used for host controllers supporting 32-bit PIO operations. It is a completely safe thing to do because if 32-bit PIO is not supported or enabled ata_sff_data_xfer32() will fallback to a standard method. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_artop: add Power Management supportBartlomiej Zolnierkiewicz
Fixes IDE -> libata regression. There shouldn't be any problems with it as corresponding IDE's host driver (aec62xx) has been supporting PCI Power Management since Oct 10 2008 (commit feb22b7f "ide: add proper PCI PM support (v2)") and IDE PM since Jun 14 2003 (patch v2.5.73 "ide: Power Management"). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_sl82c105: add Power Management supportBartlomiej Zolnierkiewicz
Fixes IDE -> libata regression. There shouldn't be any problems with it as corresponding IDE's host driver (sl82c105) has been supporting PCI Power Management since Oct 10 2008 (commit feb22b7f "ide: add proper PCI PM support (v2)") and IDE PM since Jun 14 2003 (patch v2.5.73 "ide: Power Management"). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_pdc2027x: add Power Management supportBartlomiej Zolnierkiewicz
Fixes IDE -> libata regression. There shouldn't be any problems with it as corresponding IDE's host driver (pdc202xx_new) has been supporting PCI Power Management since Oct 10 2008 (commit feb22b7f "ide: add proper PCI PM support (v2)") and IDE PM since Jun 14 2003 (patch v2.5.73 "ide: Power Management"). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-10-14pata_legacy: use PIO mask definesBartlomiej Zolnierkiewicz
Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>