summaryrefslogtreecommitdiffstats
path: root/block
AgeCommit message (Collapse)Author
2007-07-22Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (60 commits) [SCSI] libsas: make ATA functions selectable by a config option [SCSI] bsg: unexport sg v3 helper functions [SCSI] bsg: fix bsg_unregister_queue [SCSI] bsg: make class backlinks [SCSI] 3w-9xxx: add support for 9690SA [SCSI] bsg: fix bsg_register_queue error path [SCSI] ESP: Increase ESP_BUS_TIMEOUT to 275. [SCSI] libsas: fix scr_read/write users and update the libata documentation [SCSI] mpt fusion: update Kconfig help [SCSI] scsi_transport_sas: add destructor for bsg [SCSI] iscsi_tcp: buggered kmalloc() [SCSI] qla2xxx: Update version number to 8.02.00-k2. [SCSI] qla2xxx: Add ISP25XX support. [SCSI] qla2xxx: Use pci_try_set_mwi(). [SCSI] qla2xxx: Use PCI-X/PCI-Express read control interfaces. [SCSI] qla2xxx: Re-factor isp_operations to static structures. [SCSI] qla2xxx: Validate mid-layer 'underflow' during check-condition handling. [SCSI] qla2xxx: Correct setting of 'current' and 'supported' speeds during FDMI registration. [SCSI] qla2xxx: Generalize iIDMA support. [SCSI] qla2xxx: Generalize FW-Interface-2 support. ...
2007-07-22[SCSI] bsg: unexport sg v3 helper functionsFUJITA Tomonori
blk_fill_sghdr_rq, blk_unmap_sghdr_rq, and blk_complete_sghdr_rq were exported for bsg, however bsg was changed to support only sg v4. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-21[SCSI] bsg: fix bsg_unregister_queueFUJITA Tomonori
scsi_sysfs_add_sdev ignores the bsg_register_queue failure, so bsg_unregister_queue must check whether the queue has a bsg device. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-21[SCSI] bsg: make class backlinksJames Bottomley
Currently, bsg doesn't make class backlinks (a process whereby you'd get a link to bsg in the device directory in the same way you get one for sg). This is because the bsg device is uninitialised, so the class device has nothing it can attach to. The fix is to make the bsg device point to the cdevice of the entity creating the bsg, necessitating changing the bsg_register_queue() prototype into a form that takes the generic device. Acked-by: FUJITA Tomonori <tomof@acm.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-21[SCSI] bsg: fix bsg_register_queue error pathJames Bottomley
unfortunately, if IS_ERR(class_dev) is true, that means class_dev isn't null and the check in the error leg is pointless ... it's also asking for trouble to request unregistration of a device we haven't actually created (although it works currently). Fix by using explicit gotos and unregisters. Acked-by: FUJITA Tomonori <tomof@acm.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20cfq: Write-only stuff in CFQ data structuresAlexey Dobriyan
There are some leftover bits from the task cooperator patch, that was yanked out again. While it will get reintroduced, no point in having this write-only stuff in the tree. So yank it. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-20cfq: async queue allocation per priorityVasily Tarasov
If we have two processes with different ioprio_class, but the same ioprio_data, their async requests will fall into the same queue. I guess such behavior is not expected, because it's not right to put real-time requests and best-effort requests in the same queue. The attached patch fixes the problem by introducing additional *cfqq fields on cfqd, pointing to per-(class,priority) async queues. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-20mm: Remove slab destructors from kmem_cache_create().Paul Mundt
Slab destructors were no longer supported after Christoph's c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-19[SCSI] bsg: separate bsg and SCSI (so SCSI can be modular)James Bottomley
This patch moves the bsg registration into SCSI so that bsg no longer has a dependency on the scsi_interface_register API. This can be viewed as a temporary expedient until we can get universal bsg binding sorted out properly. Also use the sdev bus_id as the generic bsg name (to avoid clashes with the queue name). Acked-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-19some kmalloc/memset ->kzalloc (tree wide)Yoann Padioleau
Transform some calls to kmalloc/memset to a single kzalloc (or kcalloc). Here is a short excerpt of the semantic patch performing this transformation: @@ type T2; expression x; identifier f,fld; expression E; expression E1,E2; expression e1,e2,e3,y; statement S; @@ x = - kmalloc + kzalloc (E1,E2) ... when != \(x->fld=E;\|y=f(...,x,...);\|f(...,x,...);\|x=E;\|while(...) S\|for(e1;e2;e3) S\) - memset((T2)x,0,E1); @@ expression E1,E2,E3; @@ - kzalloc(E1 * E2,E3) + kcalloc(E1,E2,E3) [akpm@linux-foundation.org: get kcalloc args the right way around] Signed-off-by: Yoann Padioleau <padator@wanadoo.fr> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Bryan Wu <bryan.wu@analog.com> Acked-by: Jiri Slaby <jirislaby@gmail.com> Cc: Dave Airlie <airlied@linux.ie> Acked-by: Roland Dreier <rolandd@cisco.com> Cc: Jiri Kosina <jkosina@suse.cz> Acked-by: Dmitry Torokhov <dtor@mail.ru> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Mauro Carvalho Chehab <mchehab@infradead.org> Acked-by: Pierre Ossman <drzeus-list@drzeus.cx> Cc: Jeff Garzik <jeff@garzik.org> Cc: "David S. Miller" <davem@davemloft.net> Acked-by: Greg KH <greg@kroah.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17Merge branch 'bsg' of git://git.kernel.dk/data/git/linux-2.6-blockLinus Torvalds
* 'bsg' of git://git.kernel.dk/data/git/linux-2.6-block: bsg: fix missing space in version print Don't define empty struct bsg_class_device if !CONFIG_BLK_DEV_BSG bsg: Kconfig updates bsg: minor cleanup bsg: device hash table cleanup bsg: fix initialization error handling bugs bsg: mark FUJITA Tomonori as bsg maintainer bsg: convert to dynamic major bsg: address various review comments
2007-07-17unregister_blkdev(): return voidAkinobu Mita
Put WARN_ON and fixed all callers of unregister_blkdev(). Now we can make unregister_blkdev return void. Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17unregister_blkdev(): do WARN_ON on failureAkinobu Mita
When unregister_blkdev() has failed, something wrong happened. This patch adds WARN_ON to notify of such badness. Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17Slab allocators: Replace explicit zeroing with __GFP_ZEROChristoph Lameter
kmalloc_node() and kmem_cache_alloc_node() were not available in a zeroing variant in the past. But with __GFP_ZERO it is possible now to do zeroing while allocating. Use __GFP_ZERO to remove the explicit clearing of memory via memset whereever we can. Signed-off-by: Christoph Lameter <clameter@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17bsg: fix missing space in version printJens Axboe
Tomo introduced a bug in his commit, removing the space between "driver" and "version" in the init printk. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-17bsg: Kconfig updatesFUJITA Tomonori
- add the detailed explanation. - remove 'default y'. - make 'EXPERIMENTAL' keyword visible to the user in menu. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-17bsg: minor cleanupFUJITA Tomonori
- fix MODULE_DESCRIPTION typo. - unify MODULE_DESCRIPTION and bsg_version. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-17bsg: device hash table cleanupFUJITA Tomonori
- kill unused bsg_list_idx macro. - add bsg_dev_idx_hash() that returns an appropriate hlist_head. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-17bsg: fix initialization error handling bugsFUJITA Tomonori
This fixes the following bugs and cleans up the initialization code: - cdev_del is missing. - unregister_chrdev_region should be used instead of unregister_chrdev. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-17bsg: convert to dynamic majorJens Axboe
240 was hardcoded, that was clearly a dumb mistake. Convert bsg to use alloc_chrdev_region() to retrieve a dynamic major. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-17bsg: address various review commentsJens Axboe
This address most of the comments made by Andrew. The two remaining are conversion to idr, and dynamic major. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16Make BLK_DEV_BSG depend strictly on SCSI=yLinus Torvalds
The SCSI code can be compiled modular, but BLK_DEV_BSG currently cannot, and depends on the SCSI layer. So make sure that it depends on the SCSI layer being compiled in, not just available as a module. Noticed by Jeff Garzik and S.Çağlar Onur. Cc: Jeff Garzik <jeff@garzik.org> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: S.Çağlar Onur <caglar@pardus.org.tr> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16Fix new generic block device SG compileLinus Torvalds
We had a merge issue with the "dentry" field going away from the kobject, and being replaced by a sysfs_dirent field (named "sd") instead. That broke the BSG compile. Cc: Jens Axboe <jens.axboe@oracle.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-16bsg: Kconfig updatesFUJITA Tomonori
This updates bsg entry in Kconfig: - bsg supports sg v4 - bsg depends on SCSI - it might be better to mark it experimental for a while Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16bsg: add SCSI transport-level request supportFUJITA Tomonori
This enables bsg to handle SCSI transport-level request like SAS management protocol (SMP). - add BSG_SUB_PROTOCOL_{SCSI_CMD, SCSI_TMF, SCSI_TRANSPORT} definitions. - SCSI transport-level requests skip blk_verify_command(). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16bsg: add bidi supportFUJITA Tomonori
bsg uses the rq->next_rq pointer for a bidi request. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16add a struct request pointer to the request structureFUJITA Tomonori
This adds a struct request pointer to the request structure for the second data phase (bidi for now). A request queue supporting bidi requests sets QUEUE_FLAG_BIDI. This prevents sending bidi requests to a non-bidi queue. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16bsg: fix the deadlock on discarding done commandsFUJITA Tomonori
The previous commit introduced a deadlock in discarding commands, because we forget to unlock the bd spinlock. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16bsg: fix a blocking read bugFUJITA Tomonori
This patch fixes a bug that read() returns ENODATA even with a blocking file descriptor when there are no commands pending. This also includes some cleanups. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16bsg: minor bug fixesFUJITA Tomonori
This fixes the following minor issues: - add EXPORT_SYMBOL_GPL for bsg_register_queue and bsg_unregister_queue. - shut up gcc warnings Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <axboe@nelson.home.kernel.dk>
2007-07-16improve bsg device allocationFUJITA Tomonori
This patch addresses on two issues on bsg device allocation. - the current maxium number of bsg devices is 256. It's too small if we allocate bsg devices to all SCSI devices, transport entities, etc. This increses the maxium number to 32768 (taken from the sg driver). - SCSI devices are dynamically added and removed. Currently, bsg can't handle it well since bsd_device->minor is simply increased. This is dependent on the patchset that I posted yesterday: http://marc.info/?l=linux-scsi&m=117440208726755&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16bind bsg to all SCSI devicesFUJITA Tomonori
This patch binds bsg to all SCSI devices (their request queues) like the current sg driver does. We can send SCSI commands to non disk and cdrom scsi devices like OSD via bsg. This patch removes bsg_register_queue from blk_register_queue so bsg devices aren't bound to non SCSI block devices. If they want bsg, I'll send a patch to do that. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16bsg: bind bsg to request_queue instead of gendiskFUJITA Tomonori
This patch binds bsg devices to request_queue instead of gendisk. Any objects (like transport entities) can define own request_handler and create own bsg device. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16bsg: add a request_queue argument to scsi_cmd_ioctl()FUJITA Tomonori
bsg uses scsi_cmd_ioctl() for some SCSI/sg ioctl commands. scsi_cmd_ioctl() gets a request queue from a gendisk arguement. This prevents bsg being bound to SCSI devices that don't have a gendisk (like OSD). This adds a request_queue argument to scsi_cmd_ioctl(). The SCSI/sg ioctl commands doesn't use a gendisk so it's safe for any SCSI devices to use scsi_cmd_ioctl(). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16bsg: simplify __bsg_alloc_command failpathFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16bsg: add cheasy error checks for sysfs stuffJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16Add queue resizing supportJens Axboe
Just get rid of the preallocated command map, use the slab cache to get/free commands instead. Original patch from FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>, changed by me to not use a mempool. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16bsg: silence a bogus gcc warningJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16bsg: style cleanupJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16bsg: add SG_IO to SG v4FUJITA Tomonori
This adds SG_IO support to SG v4. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16bsg: replace SG v3 with SG v4FUJITA Tomonori
This patch replaces SG v3 in bsg with SG v4 (except for SG_IO). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16block: export blk_verify_command for SG v4FUJITA Tomonori
blk_fill_sghdr_rq doesn't work for SG v4 so verify_command needed to be exported. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16bsg: minor cleanupsFUJITA Tomonori
This just kills linux/config.h and dprintk warnings. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16block: changes for blk_rq_unmap_user new APIFUJITA Tomonori
This converts block/scsi_ioctl.c use blk_rq_unmap_user new API. blk_unmap_sghdr_rq is too simple and it might be better to remove it. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-16bsg: support for full generic block layer SG v3Jens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10Use list_for_each_entry() instead of list_for_each() in the block deviceMatthias Kaehlcke
elevator Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10Use menuconfigs instead of menus, so the whole menu can be disabled at onceJan Engelhardt
instead of going through all options. Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10cfq-iosched: fix async queue behaviourJens Axboe
With the cfq_queue hash removal, we inadvertently got rid of the async queue sharing. This was not intentional, in fact CFQ purposely shares the async queue per priority level to get good merging for async writes. So put some logic in cfq_get_queue() to track the shared queues. Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10[BLOCK] drop unnecessary bvec rewinding from flush_dry_bio_endioTejun Heo
Barrier bios are completed twice - once after the barrier write itself is done and again after the whole sequence is complete. flush_dry_bio_endio() is for the first completion. It doesn't really complete the bio. It rewinds bvec and resets bio so that it can be completed again when the whole barrier sequence is complete. The bvec rewinding code has the following problems. 1. The rewinding code is wrong because filesystems may pass bvec with non zero bv_offset. 2. The block layer doesn't guarantee anything about the state of bvec array on request completion. bv_offset and len are updated iff __end_that_request_first() completes the bvec partially. Because of #2, #1 doesn't really matter (nobody cares whether bvec is re-wound correctly or not) but then again by not doing unwinding at all, we'll always give back the same bvec to the caller as full bvec completion doesn't alter bvecs and the final completion is always full completion. Drop unnecessary rewinding code. This is spotted by Neil Brown. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Neil Brown <neilb@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-07-10blk_hw_contig_segment(): bad segment size checksJens Axboe
Two bugs in there: - The virt oversize check should use the current bio hardware back size and the next bio front size, not the same bio. Spotted by Neil Brown. - The segment size check should add hw front sizes, not total bio sizes. Spotted by James Bottomley Acked-by: James Bottomley <James.Bottomley@SteelEye.com> Acked-by: NeilBrown <neilb@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-01 12:01:30 +0000