summaryrefslogtreecommitdiffstats
path: root/arch/x86_64
AgeCommit message (Collapse)Author
2005-11-23[PATCH] kprobes: Fix return probes on sys_execveJim Keniston
Fix a bug in kprobes that can cause an Oops or even a crash when a return probe is installed on one of the following functions: sys_execve, do_execve, load_*_binary, flush_old_exec, or flush_thread. The fix is to remove the call to kprobe_flush_task() in flush_thread(). This fix has been tested on all architectures for which the return-probes feature has been implemented (i386, x86_64, ppc64, ia64). Please apply. BACKGROUND Up to now, we have called kprobe_flush_task() under two situations: when a task exits, and when it execs. Flushing kretprobe_instances on exit is correct because (a) do_exit() doesn't return, and (b) one or more return-probed functions may be active when a task calls do_exit(). Neither is the case for sys_execve() and its callees. Initially, the mistaken call to kprobe_flush_task() on exec was harmless because we put the "real" return address of each active probed function back in the stack, just to be safe, when we recycled its kretprobe_instance. When support for ppc64 and ia64 was added, this safety measure couldn't be employed, and was eventually dropped even for i386 and x86_64. sys_execve() and its callees were informally blacklisted for return probes until this fix was developed. Acked-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by: Jim Keniston <jkenisto@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14Merge x86-64 update from AndiLinus Torvalds
2005-11-14[PATCH] x86_64: Fix sparse memBob Picco
Fix up booting with sparse mem enabled. Otherwise it would just cause an early PANIC at boot. Signed-off-by: Bob Picco <bob.picco@hp.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Increase the maximum number of local APICs to the maximumAndi Kleen
This is needed for large multinode IBM systems which have a sparse APIC space in clustered mode, fully covering the available 8 bits. The previous kernels would limit the local APIC number to 127, which caused it to reject some of the CPUs at boot. I increased the maximum and shrunk the apic_version array a bit to make up for that (the version is only 8 bit, so don't need an full int to store) Cc: Chris McDermott <lcm@us.ibm.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Remove CONFIG_CHECKING and add command line option for ↵Andi Kleen
pagefault tracing CONFIG_CHECKING covered some debugging code used in the early times of the port. But it wasn't even SMP safe for quite some time and the bugs it checked for seem to be gone. This patch removes all the code to verify GS at kernel entry. There haven't been any new bugs in this area for a long time. Previously it also covered the sysctl for the page fault tracing. That didn't make much sense because that code was unconditionally compiled in. I made that a boot option now because it is typically only useful at boot. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Make node boundaries consistentMagnus Damm
The current x86_64 NUMA memory code is inconsequent when it comes to node memory ranges. The exact behaviour varies depending on which config option that is used. setup_node_bootmem() has start and end as arguments and these are used to calculate the size of the node like this: (end - start). This is all fine if end is pointing to the first non-available byte. The problem is that the current x86_64 code sometimes treats it as the last present byte and sometimes as the first non-available byte. The result is that some configurations might lose a page at the end of the range. This patch tries to fix CONFIG_ACPI_NUMA, CONFIG_K8_NUMA and CONFIG_NUMA_EMU so they all treat the end variable as the first non-available byte. This is the same way as the single node code. The patch is boot tested on dual x86_64 hardware with the above configurations, but maybe the removed code is needed as some workaround? Signed-off-by: Magnus Damm <magnus@valinux.co.jp> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Log machine checks from boot on Intel systemsAndi Kleen
The logging for boot errors was turned off because it was broken on some AMD systems. But give Intel EM64T systems a chance because they are supposed to be correct there. The advantage is that there is a chance to actually log uncorrected machine checks after the reset. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Make ACPI NUMA and NUMA emulation peers of K8_NUMA in KconfigRavikiran G Thirumalai
On x86_64 arches, there is no way to choose ACPI_NUMA without having to choose K8_NUMA. CONFIG_K8_NUMA is not needed for Intel EM64T NUMA boxes. It also looks odd if you have to select ACPI_NUMA from the power management menu. This patch fixes those oddities. Patch does the following: 1. Makes NUMA a config option like other arches 2. Makes topology detection options like K8_NUMA dependent on NUMA 3. Choosing ACPI NUMA detection can be done from the standard "Processor type and features" menu AK: I fixed up the dependencies and changed the help texts a bit on top of Kiran's patch. Signed-off-by: Ravikiran Thirumalai <kiran@scalex86.org> Signed-off-by: Shai Fultheim <shai@scalex86.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Use common sys_time64Paolo 'Blaisorblade' Giarrusso
Keeping this function does not makes sense because it's a copied (and buggy) copy of sys_time. The only difference is that now.tv_sec (which is a time_t, i.e. a 64-bit long) is copied (and truncated) into a int (32-bit). The prototype is the same (they both take a long __user *), so let's drop this and redirect it to sys_time (and make sure it exists by defining __ARCH_WANT_SYS_TIME). Only disadvantage is that the sys_stime definition is also compiled (may be fixed if needed by adding a separate __ARCH_WANT_SYS_STIME macro, and defining it for all arch's defining __ARCH_WANT_SYS_TIME except x86_64). Acked-by: Andi Kleen <ak@suse.de> Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Remove optimization for B stepping AMD K8Andi Kleen
B stepping were the first shipping Opterons. memcpy/memset/copy_page/ clear_page had special optimized version for them. These are really old and in the minority now and the difference to the generic versions (using rep microcode) is not that big anyways. So just remove them. TODO: figure out optimized versions for Intel Netburst based EM64T Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Reduce number of retries for reset through keyboard controllerAndi Kleen
Old code could retry for 10 seconds worst time. Only try it for one second now. Suggested by Yinghai Lu Cc: Yinghai.Lu@amd.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86-64/i386: Intel HT, Multi core detection fixesSiddha, Suresh B
Fields obtained through cpuid vector 0x1(ebx[16:23]) and vector 0x4(eax[14:25], eax[26:31]) indicate the maximum values and might not always be the same as what is available and what OS sees. So make sure "siblings" and "cpu cores" values in /proc/cpuinfo reflect the values as seen by OS instead of what cpuid instruction says. This will also fix the buggy BIOS cases (for example where cpuid on a single core cpu says there are "2" siblings, even when HT is disabled in the BIOS. http://bugzilla.kernel.org/show_bug.cgi?id=4359) Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Don't enable interrupt unconditionally in reboot pathAndi Kleen
When they were disabled before (e.g. after a panic) it's better to keep them off, otherwise followon panics can happen from timer interrupt handlers etc. Drawback is that pageup in the console won't work anymore though. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Formatting fixes for arch/x86_64/kernel/process.cAndi Kleen
No functional changes. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Allow modular build of ia32 aout loaderAndi Kleen
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Force correct address space size for MTRR on some 64bit ↵Shaohua Li
Intel Xeons They report 40bit, but only have 36bits of physical address space. This caused problems with setting up the correct masks for MTRR. CPUID workaround for steppings 0F33h(supporting x86) and 0F34h(supporting x86 and EM64T). Detail info can be found at: http://download.intel.com/design/Xeon/specupdt/30240216.pdf http://download.intel.com/design/Pentium4/specupdt/30235221.pdf Signed-off-by: Shaohua Li<shaohua.li@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Optimize NUMA node hash functionEric Dumazet
Compute the highest possible value for memnode_shift, in order to reduce footprint of memnodemap[] to the minimum, thus making all users (phys_to_nid(), kfree()), more cache friendly. Before the patch : Node 0 MemBase 0000000000000000 Limit 00000001ffffffff Node 1 MemBase 0000000200000000 Limit 00000003ffffffff Using 23 for the hash shift. Max adder is 3ffffffff After the patch : Node 0 MemBase 0000000000000000 Limit 00000001ffffffff Node 1 MemBase 0000000200000000 Limit 00000003ffffffff Using 33 for the hash shift. In this case, only 2 bytes of memnodemap[] are used, instead of 2048 Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Save/restore CS in 64bit signal handlers and force __USER_CS ↵Bryan Ford
for CS This allows to run 64bit signal handlers in 64bit processes that run small code snippets in compat mode. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: New heuristics to find out hotpluggable CPUs.Andi Kleen
With a NR_CPUS==128 kernel with CPU hotplug enabled we would waste 4MB on per CPU data of all possible CPUs. The reason was that HOTPLUG always set up possible map to NR_CPUS cpus and then we need to allocate that much (each per CPU data is roughly ~32k now) The underlying problem is that ACPI didn't tell us how many hotplug CPUs the platform supports. So the old code just assumed all, which would lead to this memory wastage. This implements some new heuristics: - If the BIOS specified disabled CPUs in the ACPI/mptables assume they can be enabled later (this is bending the ACPI specification a bit, but seems like a obvious extension) - The user can overwrite it with a new additionals_cpus=NUM option - Otherwise use half of the available CPUs or 2, whatever is more. Cc: ashok.raj@intel.com Cc: len.brown@intel.com Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Replace swiotlb extern with includeAndi Kleen
Minor victory on the continuous quest against all stray extern. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Replace cpu_pda extern with includeAndi Kleen
Minor cleanup - remove obsolete extern Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Only use asm/sections.h to declare section symbolsAndi Kleen
Adding __initdata_* to asm-generic/sections.h Replaces a lot of open coded externs in arch/x86_64/* I had to change __bss_end to __bss_stop to match the other architectures. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Unmap NULL during early bootupSiddha, Suresh B
We should zap the low mappings, as soon as possible, so that we can catch kernel bugs more effectively. Previously early boot had NULL mapped and didn't trap on NULL references. This patch introduces boot_level4_pgt, which will always have low identity addresses mapped. Druing boot, all the processors will use this as their level4 pgt. On BP, we will switch to init_level4_pgt as soon as we enter C code and zap the low mappings as soon as we are done with the usage of identity low mapped addresses. On AP's we will zap the low mappings as soon as we jump to C code. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Speed up numa_node_id by putting it directly into the PDAAndi Kleen
Not go from the CPU number to an mapping array. Mode number is often used now in fast paths. This also adds a generic numa_node_id to all the topology includes Suggested by Eric Dumazet Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Fix gcc 4 warning in aperture.cAndi Kleen
Fix arch/x86_64/kernel/aperture.c: In function #iommu_hole_init#: arch/x86_64/kernel/aperture.c:199: warning: #aper_order# may be used uninitialized in this function Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86-64/i386: Fix CPU model for family 6Suresh Siddha
According to cpuid instruction in IA32 SDM-Vol2, when computing cpu model, we need to consider extended model ID for family 0x6 also. AK: Also added fixes/simplifcation from Petr Vandrovec Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Remove duplicate __cpuinit defineAshok Raj
Remove duplicate __cpuinit in smp.c. Already defined in init.h which is already included. Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Use the DMA32 zone for dma_alloc_coherent()/pci_alloc_consistentAndi Kleen
Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] i386/x86-64: Share interrupt vectors when there is a large number of ↵James Cleverdon
interrupt sources Here's a patch that builds on Natalie Protasevich's IRQ compression patch and tries to work for MPS boots as well as ACPI. It is meant for a 4-node IBM x460 NUMA box, which was dying because it had interrupt pins with GSI numbers > NR_IRQS and thus overflowed irq_desc. The problem is that this system has 270 GSIs (which are 1:1 mapped with I/O APIC RTEs) and an 8-node box would have 540. This is much bigger than NR_IRQS (224 for both i386 and x86_64). Also, there aren't enough vectors to go around. There are about 190 usable vectors, not counting the reserved ones and the unused vectors at 0x20 to 0x2F. So, my patch attempts to compress the GSI range and share vectors by sharing IRQs. Cc: "Protasevich, Natalie" <Natalie.Protasevich@unisys.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Support for AMD specific MCE Threshold.Jacob Shin
MC4_MISC - DRAM Errors Threshold Register realized under AMD K8 Rev F. This register is used to count correctable and uncorrectable ECC errors that occur during DRAM read operations. The user may interface through sysfs files in order to change the threshold configuration. bank%d/error_count - reads current error count, write to clear. bank%d/interrupt_enable - set/clear interrupt enable. bank%d/threshold_limit - read/write the threshold limit. APIC vector 0xF9 in hw_irq.h. 5 software defined bank ids in mce.h. new apic.c function to setup threshold apic lvt. defaults to interrupt off, count enabled, and threshold limit max. sysfs interface created on /sys/devices/system/threshold. AK: added some ifdefs to make it compile on UP Signed-off-by: Jacob Shin <jacob.shin@amd.com> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Account mem_map in VM holes accountingAndi Kleen
The VM needs to know about lost memory in zones to accurately balance dirty pages. This patch accounts mem_map in there too, which fixes a constant errror of a few percent. Also some other misc mappings and the kernel text itself are accounted too. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Add 4GB DMA32 zoneAndi Kleen
Add a new 4GB GFP_DMA32 zone between the GFP_DMA and GFP_NORMAL zones. As a bit of historical background: when the x86-64 port was originally designed we had some discussion if we should use a 16MB DMA zone like i386 or a 4GB DMA zone like IA64 or both. Both was ruled out at this point because it was in early 2.4 when VM is still quite shakey and had bad troubles even dealing with one DMA zone. We settled on the 16MB DMA zone mainly because we worried about older soundcards and the floppy. But this has always caused problems since then because device drivers had trouble getting enough DMA able memory. These days the VM works much better and the wide use of NUMA has proven it can deal with many zones successfully. So this patch adds both zones. This helps drivers who need a lot of memory below 4GB because their hardware is not accessing more (graphic drivers - proprietary and free ones, video frame buffer drivers, sound drivers etc.). Previously they could only use IOMMU+16MB GFP_DMA, which was not enough memory. Another common problem is that hardware who has full memory addressing for >4GB misses it for some control structures in memory (like transmit rings or other metadata). They tended to allocate memory in the 16MB GFP_DMA or the IOMMU/swiotlb then using pci_alloc_consistent, but that can tie up a lot of precious 16MB GFPDMA/IOMMU/swiotlb memory (even on AMD systems the IOMMU tends to be quite small) especially if you have many devices. With the new zone pci_alloc_consistent can just put this stuff into memory below 4GB which works better. One argument was still if the zone should be 4GB or 2GB. The main motivation for 2GB would be an unnamed not so unpopular hardware raid controller (mostly found in older machines from a particular four letter company) who has a strange 2GB restriction in firmware. But that one works ok with swiotlb/IOMMU anyways, so it doesn't really need GFP_DMA32. I chose 4GB to be compatible with IA64 and because it seems to be the most common restriction. The new zone is so far added only for x86-64. For other architectures who don't set up this new zone nothing changes. Architectures can set a compatibility define in Kconfig CONFIG_DMA_IS_DMA32 that will define GFP_DMA32 as GFP_DMA. Otherwise it's a nop because on 32bit architectures it's normally not needed because GFP_NORMAL (=0) is DMA able enough. One problem is still that GFP_DMA means different things on different architectures. e.g. some drivers used to have #ifdef ia64 use GFP_DMA (trusting it to be 4GB) #elif __x86_64__ (use other hacks like the swiotlb because 16MB is not enough) ... . This was quite ugly and is now obsolete. These should be now converted to use GFP_DMA32 unconditionally. I haven't done this yet. Or best only use pci_alloc_consistent/dma_alloc_coherent which will use GFP_DMA32 transparently. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-14[PATCH] x86_64: Update defconfigAndi Kleen
Rerun and enable autofs 4, relayfs and softdog Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-13[PATCH] x86_64 two timer entries in /sysKarsten Wiese
attached patch renames one instance of /sys/devices/system/timer to /sys/devices/system/timer_pit to avoid a name clash with another instance created in time.c. Acked-by: Andi Kleen <ak@muc.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] sched: resched and cpu_idle reworkNick Piggin
Make some changes to the NEED_RESCHED and POLLING_NRFLAG to reduce confusion, and make their semantics rigid. Improves efficiency of resched_task and some cpu_idle routines. * In resched_task: - TIF_NEED_RESCHED is only cleared with the task's runqueue lock held, and as we hold it during resched_task, then there is no need for an atomic test and set there. The only other time this should be set is when the task's quantum expires, in the timer interrupt - this is protected against because the rq lock is irq-safe. - If TIF_NEED_RESCHED is set, then we don't need to do anything. It won't get unset until the task get's schedule()d off. - If we are running on the same CPU as the task we resched, then set TIF_NEED_RESCHED and no further action is required. - If we are running on another CPU, and TIF_POLLING_NRFLAG is *not* set after TIF_NEED_RESCHED has been set, then we need to send an IPI. Using these rules, we are able to remove the test and set operation in resched_task, and make clear the previously vague semantics of POLLING_NRFLAG. * In idle routines: - Enter cpu_idle with preempt disabled. When the need_resched() condition becomes true, explicitly call schedule(). This makes things a bit clearer (IMO), but haven't updated all architectures yet. - Many do a test and clear of TIF_NEED_RESCHED for some reason. According to the resched_task rules, this isn't needed (and actually breaks the assumption that TIF_NEED_RESCHED is only cleared with the runqueue lock held). So remove that. Generally one less locked memory op when switching to the idle thread. - Many idle routines clear TIF_POLLING_NRFLAG, and only set it in the inner most polling idle loops. The above resched_task semantics allow it to be set until before the last time need_resched() is checked before going into a halt requiring interrupt wakeup. Many idle routines simply never enter such a halt, and so POLLING_NRFLAG can be always left set, completely eliminating resched IPIs when rescheduling the idle task. POLLING_NRFLAG width can be increased, to reduce the chance of resched IPIs. Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Con Kolivas <kernel@kolivas.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] sched: disable preempt in idle tasksNick Piggin
Run idle threads with preempt disabled. Also corrected a bugs in arm26's cpu_idle (make it actually call schedule()). How did it ever work before? Might fix the CPU hotplugging hang which Nigel Cunningham noted. We think the bug hits if the idle thread is preempted after checking need_resched() and before going to sleep, then the CPU offlined. After calling stop_machine_run, the CPU eventually returns from preemption and into the idle thread and goes to sleep. The CPU will continue executing previous idle and have no chance to call play_dead. By disabling preemption until we are ready to explicitly schedule, this bug is fixed and the idle threads generally become more robust. From: alexs <ashepard@u.washington.edu> PPC build fix From: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> MIPS build fix Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Yoichi Yuasa <yuasa@hh.iij4u.or.jp> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-09[PATCH] move some COMPATIBLE_IOCTL entries from x86_64 to common codeChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] unexport phys_proc_id and cpu_core_idAdrian Bunk
EXPORT_SYMBOL's for phys_proc_id and cpu_core_id were added this year but never used. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] Kprobes: preempt_disable/enable() simplificationAnanth N Mavinakayanahalli
Reorganize the preempt_disable/enable calls to eliminate the extra preempt depth. Changes based on Paul McKenney's review suggestions for the kprobes RCU changeset. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] Kprobes: Use RCU for (un)register synchronization - arch changesAnanth N Mavinakayanahalli
Changes to the arch kprobes infrastructure to take advantage of the locking changes introduced by usage of RCU for synchronization. All handlers are now run without any locks held, so they have to be re-entrant or provide their own synchronization. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] Kprobes: Track kprobe on a per_cpu basis - x86_64 changesAnanth N Mavinakayanahalli
x86_64 changes to track kprobe execution on a per-cpu basis. We now track the kprobe state machine independently on each cpu using a arch specific kprobe control block. Signed-off-by: Ananth N Mavinakayanahalli <ananth@in.ibm.com> Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] Kprobes: rearrange preempt_disable/enable() callsAnanth N Mavinakayanahalli
The following set of patches are aimed at improving kprobes scalability. We currently serialize kprobe registration, unregistration and handler execution using a single spinlock - kprobe_lock. With these changes, kprobe handlers can run without any locks held. It also allows for simultaneous kprobe handler executions on different processors as we now track kprobe execution on a per processor basis. It is now necessary that the handlers be re-entrant since handlers can run concurrently on multiple processors. All changes have been tested on i386, ia64, ppc64 and x86_64, while sparc64 has been compile tested only. The patches can be viewed as 3 logical chunks: patch 1: Reorder preempt_(dis/en)able calls patches 2-7: Introduce per_cpu data areas to track kprobe execution patches 8-9: Use RCU to synchronize kprobe (un)registration and handler execution. Thanks to Maneesh Soni, James Keniston and Anil Keshavamurthy for their review and suggestions. Thanks again to Anil, Hien Nguyen and Kevin Stafford for testing the patches. This patch: Reorder preempt_disable/enable() calls in arch kprobes files in preparation to introduce locking changes. No functional changes introduced by this patch. Signed-off-by: Ananth N Mavinakayahanalli <ananth@in.ibm.com> Signed-off-by: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] consolidate sys_ptrace()Christoph Hellwig
The sys_ptrace boilerplate code (everything outside the big switch statement for the arch-specific requests) is shared by most architectures. This patch moves it to kernel/ptrace.c and leaves the arch-specific code as arch_ptrace. Some architectures have a too different ptrace so we have to exclude them. They continue to keep their implementations. For sh64 I had to add a sh64_ptrace wrapper because it does some initialization on the first call. For um I removed an ifdefed SUBARCH_PTRACE_SPECIAL block, but SUBARCH_PTRACE_SPECIAL isn't defined anywhere in the tree. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Paul Mackerras <paulus@samba.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Acked-By: David Howells <dhowells@redhat.com> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] Move Kprobes and Oprofile to "Instrumentation Support" menuPrasanna S Panchamukhi
Andrew Morton suggested to move kprobes from kernel hacking menu, since kernel hacking menu is in-appropriate for the Kprobes. This patch moves Kprobes and Oprofile under instrumentation menu. (akpm: it's not a natural fit, but things like djprobes and the s390 guys' statistics library need a home) Signed-of-by: Prasanna S Panchamukhi <prasanna@in.ibm.com> Cc: Philippe Elie <phil.el@wanadoo.fr> Cc: John Levon <levon@movementarian.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-02[PATCH] x86-64: bitops fix for -OsAlexandre Oliva
This fixes the x86-64 find_[first|next]_zero_bit() function for the end-of-range case. It didn't test for a zero size, and the "rep scas" would do entirely the wrong thing. Signed-off-by: Alexandre Oliva <oliva@lsd.ic.unicamp.br> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-31manual update from upstream:Tony Luck
Applied Al's change 06a544971fad0992fe8b92c5647538d573089dd4 to new location of swiotlb.c Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-10-30[PATCH] hpet-RTC: cache the comparator registerClemens Ladisch
Reads from an HPET register require a round trip to the south bridge and are almost as slow as PCI reads. By caching the last value we've written to the comparator register, we can eliminate all HPET reads from the fast path in the emulated RTC interrupt handler. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet-RTC: fix timer config register accessesClemens Ladisch
Make sure that the RTC timer is in non-periodic mode; some stupid BIOS might have initialized it to periodic mode. Furthermore, don't set the SETVAL bit in the config register. This wouldn't have any effect unless the timer was in period mode (which it isn't), and then the actual timer frequency would be half that of the desired one because incrementing the comparator in the interrupt handler would be done after the hardware has already incremented it itself. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] hpet-RTC: disable interrupt when no longer neededClemens Ladisch
When the emulated RTC interrupt is no longer needed, we better disable it; otherwise, we get a spurious interrupt whenever the timer has rolled over and reaches the same comparator value. Having a superfluous interrupt every five minutes doesn't hurt much, but it's bad style anyway. ;-) Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Acked-by: "Pallipadi, Venkatesh" <venkatesh.pallipadi@intel.com> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-30[PATCH] jiffies_64 cleanupThomas Gleixner
Define jiffies_64 in kernel/timer.c rather than having 24 duplicated defines in each architecture. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>