summaryrefslogtreecommitdiffstats
path: root/arch/x86/kernel/apic/numaq_32.c
AgeCommit message (Collapse)Author
2012-06-14x86/apic: Eliminate cpu_mask_to_apicid() operationAlexander Gordeev
Since there are only two locations where cpu_mask_to_apicid() is called from, remove the operation and use only cpu_mask_to_apicid_and() instead. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Suggested-and-acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/20120614074935.GE3383@dhcp-26-207.brq.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-08x86/apic: Make cpu_mask_to_apicid() operations return error codeAlexander Gordeev
Current cpu_mask_to_apicid() and cpu_mask_to_apicid_and() implementations have few shortcomings: 1. A value returned by cpu_mask_to_apicid() is written to hardware registers unconditionally. Should BAD_APICID get ever returned it will be written to a hardware too. But the value of BAD_APICID is not universal across all hardware in all modes and might cause unexpected results, i.e. interrupts might get routed to CPUs that are not configured to receive it. 2. Because the value of BAD_APICID is not universal it is counter- intuitive to return it for a hardware where it does not make sense (i.e. x2apic). 3. cpu_mask_to_apicid_and() operation is thought as an complement to cpu_mask_to_apicid() that only applies a AND mask on top of a cpumask being passed. Yet, as consequence of 18374d8 commit the two operations are inconsistent in that of: cpu_mask_to_apicid() should not get a offline CPU with the cpumask cpu_mask_to_apicid_and() should not fail and return BAD_APICID These limitations are impossible to realize just from looking at the operations prototypes. Most of these shortcomings are resolved by returning a error code instead of BAD_APICID. As the result, faults are reported back early rather than possibilities to cause a unexpected behaviour exist (in case of [1]). The only exception is setup_timer_IRQ0_pin() routine. Although obviously controversial to this fix, its existing behaviour is preserved to not break the fragile check_timer() and would better addressed in a separate fix. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/20120607131559.GF4759@dhcp-26-207.brq.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-06-08x86/apic: Factor out default vector_allocation_domain() operationAlexander Gordeev
Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/20120607131449.GC4759@dhcp-26-207.brq.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-05-18x86/apic: Add apic->eoi_write() callbackMichael S. Tsirkin
Add eoi_write callback so that kvm can override eoi accesses without touching the rest of the apic. As a side-effect, this will enable a micro-optimization for apics using msr. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: Avi Kivity <avi@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: gleb@redhat.com Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/0df425d746c49ac2ecc405174df87752869629d2.1337184153.git.mst@redhat.com [ tidied it up a bit ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-03-14x86/platform: Move APIC ID validity check into platform APIC codeDaniel J Blueman
Move APIC ID validity check into platform APIC code, so it can be overridden when needed. For NumaChip systems, always trust MADT, as it's constructed with high APIC IDs. Behaviour verifies on standard x86 systems and on NumaChip systems with this, and compile-tested with allyesconfig. Signed-off-by: Daniel J Blueman <daniel@numascale-asia.com> Reviewed-by: Steffen Persvold <sp@numascale.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: H. Peter Anvin <hpa@linux.intel.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/1331709454-27966-1-git-send-email-daniel@numascale-asia.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-22x86, apic: Make apic drivers staticSuresh Siddha
Apic probe now looks at the apic drivers listed in the .apicdrivers section. Remove apic_probe[] and make each apic driver static. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: steiner@sgi.com Cc: gorcunov@openvz.org Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110521005526.341718626@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-22x86, apic: Introduce .apicdrivers section to find the list of apic driversSuresh Siddha
This will pave the way for each apic driver to be self-contained and eliminate the need for apic_probe[]. Order in which apic drivers are listed in the .apicdrivers section is important, as this determines the apic probe order. And this is enforced by the ordering of apic driver files in the Makefile and the macros apic_driver()/apic_drivers(). Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: steiner@sgi.com Cc: gorcunov@openvz.org Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110521005526.068775085@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-02x86-32, NUMA: Update numaq to use new NUMA init protocolTejun Heo
Update numaq such that it calls numa_add_memblk() and sets numa_nodes_parsed instead of directly diddling with NUMA states. The original get_memcfg_numaq() is renamed to numaq_numa_init() and new get_memcfg_numaq() is created in numa_32.c. The shim numa_add_memblk() implementation handles node_start/end_pfn[] and node_set_online() for nodes with memory. The new get_memcfg_numaq() exactly the same with get_memcfg_from_srat() other than calling the numaq init function. Things get_memcfgs_numaq() do are not strictly necessary for numaq but added for consistency and to help unifying NUMA init handling. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-05-02x86-32, NUMA: use sparse_memory_present_with_active_regions()Tejun Heo
Instead of calling memory_present() for each region from NUMA init, call sparse_memory_present_with_active_regions() from paging_init() similarly to x86-64. For flat and numaq, this results in exactly the same memory_present() calls. For srat, if there are multiple memory chunks for a node, after this change, memory_present() will be called separately for each chunk instead of being called once to encompass the whole range, which doesn't cause any harm and actually is the better behavior. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-04-06x86-32, numa: Calculate remap size in common codeTejun Heo
Only pgdat and memmap use remap area and there isn't much benefit in allowing per-node override. In addition, the use of node_remap_size[] is confusing in that it contains number of bytes before remap initialization and then number of pages afterwards. Move remap size calculation for memap from specific NUMA config implementations to init_alloc_remap() and make node_remap_size[] static. The only behavior difference is that, before this patch, numaq_32 didn't consider max_pfn when calculating the memmap size but it's enforced after this patch, which is the right thing to do. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1301955840-7246-8-git-send-email-tj@kernel.org Acked-by: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2011-01-28x86: Replace apic->apicid_to_node() with ->x86_32_numa_cpu_node()Tejun Heo
apic->apicid_to_node() is 32bit specific apic operation which determines NUMA node for a CPU. Depending on the APIC implementation, it can be easier to determine NUMA node from either physical or logical apicid. Currently, ->apicid_to_node() takes @logical_apicid and calls hard_smp_processor_id() if the physical apicid is needed. This prevents NUMA mapping from being queried from a different CPU, which in turn makes it impossible to initialize NUMA mapping before SMP bringup. This patch replaces apic->apicid_to_node() with ->x86_32_numa_cpu_node() which takes @cpu, from which both logical and physical apicids can easily be determined. While at it, drop duplicate implementations from bigsmp_32 and summit_32, and use the default one. Signed-off-by: Tejun Heo <tj@kernel.org> Reviewed-by: Pekka Enberg <penberg@kernel.org> Cc: eric.dumazet@gmail.com Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-13-git-send-email-tj@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-28x86: Add apic->x86_32_early_logical_apicid()Tejun Heo
On x86_32, the mapping between cpu and logical apic ID differs depending on the specific apic implementation in use. The mapping is initialized while bringing up CPUs; however, this makes early inits ignore memory topology. Add a x86_32 specific apic->x86_32_early_logical_apicid() which is called early during boot to query the mapping. The mapping is later verified against the result of init_apic_ldr(). The method is allowed to return BAD_APICID if it can't be determined early. noop variant which always returns BAD_APICID is implemented and added to all x86_32 apic implementations. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: eric.dumazet@gmail.com Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: penberg@kernel.org Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-8-git-send-email-tj@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-28x86: Kill apic->cpu_to_logical_apicid()Tejun Heo
After the previous patch, apic->cpu_to_logical_apicid() is no longer used. Kill it. For apic types with custom cpu_to_logical_apicid() which is also used for other purposes, remove the function and modify its users to do the mapping directly. #ifdef's on CONFIG_SMP in es7000_32 and summit_32 are ignored during conversion as they are not used for UP kernels. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: eric.dumazet@gmail.com Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: penberg@kernel.org Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-7-git-send-email-tj@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-28x86: Replace cpu_2_logical_apicid[] with early percpu variableTejun Heo
Unlike x86_64, on x86_32, the mapping from cpu to logical apicid may vary depending on apic in use. cpu_2_logical_apicid[] array is used for this mapping. Replace it with early percpu variable x86_cpu_to_logical_apicid to make it better aligned with other mappings. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: eric.dumazet@gmail.com Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: penberg@kernel.org Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-5-git-send-email-tj@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-27x86, memblock: Replace e820_/_early string with memblock_Yinghai Lu
1.include linux/memblock.h directly. so later could reduce e820.h reference. 2 this patch is done by sed scripts mainly -v2: use MEMBLOCK_ERROR instead of -1ULL or -1UL Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-03-07Merge branch 'x86-mrst-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits) x86, mrst: Fix whitespace breakage in apb_timer.c x86, mrst: Fix APB timer per cpu clockevent x86, mrst: Remove X86_MRST dependency on PCI_IOAPIC x86, olpc: Use pci subarch init for OLPC x86, pci: Add arch_init to x86_init abstraction x86, mrst: Add Kconfig dependencies for Moorestown x86, pci: Exclude Moorestown PCI code if CONFIG_X86_MRST=n x86, numaq: Make CONFIG_X86_NUMAQ depend on CONFIG_PCI x86, pci: Add sanity check for PCI fixed bar probing x86, legacy_irq: Remove duplicate vector assigment x86, legacy_irq: Remove left over nr_legacy_irqs x86, mrst: Platform clock setup code x86, apbt: Moorestown APB system timer driver x86, mrst: Add vrtc platform data setup code x86, mrst: Add platform timer info parsing code x86, mrst: Fill in PCI functions in x86_init layer x86, mrst: Add dummy legacy pic to platform setup x86/PCI: Moorestown PCI support x86, ioapic: Add dummy ioapic functions x86, ioapic: Early enable ioapic for timer irq ... Fixed up semantic conflict of new clocksources due to commit 17622339af25 ("clocksource: add argument to resume callback").
2010-02-19x86: Move pci init function to x86_initThomas Gleixner
The PCI initialization in pci_subsys_init() is a mess. pci_numaq_init, pci_acpi_init, pci_visws_init and pci_legacy_init are called and each implementation checks and eventually modifies the global variable pcibios_scanned. x86_init functions allow us to do this more elegant. The pci.init function pointer is preset to pci_legacy_init. numaq, acpi and visws can modify the pointer in their early setup functions. The functions return 0 when they did the full initialization including bus scan. A non zero return value indicates that pci_legacy_init needs to be called either because the selected function failed or wants the generic bus scan in pci_legacy_init to happen (e.g. visws). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <43F901BD926A4E43B106BF17856F07559FB80CFE@orsmsx508.amr.corp.intel.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-07x86: Remove trailing spaces in messagesFrans Pop
Signed-off-by: Frans Pop <elendil@planet.nl> Cc: Avi Kivity <avi@redhat.com> Cc: x86@kernel.org LKML-Reference: <1265478443-31072-10-git-send-email-elendil@planet.nl> [ Left out the KVM bits. ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-12-08Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (36 commits) x86, mm: Correct the implementation of is_untracked_pat_range() x86/pat: Trivial: don't create debugfs for memtype if pat is disabled x86, mtrr: Fix sorting of mtrr after subtracting x86: Move find_smp_config() earlier and avoid bootmem usage x86, platform: Change is_untracked_pat_range() to bool; cleanup init x86: Change is_ISA_range() into an inline function x86, mm: is_untracked_pat_range() takes a normal semiclosed range x86, mm: Call is_untracked_pat_range() rather than is_ISA_range() x86: UV SGI: Don't track GRU space in PAT x86: SGI UV: Fix BAU initialization x86, numa: Use near(er) online node instead of roundrobin for NUMA x86, numa, bootmem: Only free bootmem on NUMA failure path x86: Change crash kernel to reserve via reserve_early() x86: Eliminate redundant/contradicting cache line size config options x86: When cleaning MTRRs, do not fold WP into UC x86: remove "extern" from function prototypes in <asm/proto.h> x86, mm: Report state of NX protections during boot x86, mm: Clean up and simplify NX enablement x86, pageattr: Make set_memory_(x|nx) aware of NX support x86, sleep: Always save the value of EFER ... Fix up conflicts (added both iommu_shutdown and is_untracked_pat_range) to 'struct x86_platform_ops') in arch/x86/include/asm/x86_init.h arch/x86/kernel/x86_init.c
2009-11-24x86: Move find_smp_config() earlier and avoid bootmem usageYinghai Lu
Move the find_smp_config() call to before bootmem is initialized. Use reserve_early() instead of reserve_bootmem() in it. This simplifies the code, we only need to call find_smp_config() once and can remove the now unneeded reserve parameter from x86_init_mpparse::find_smp_config. We thus also reduce x86's dependency on bootmem allocations. Signed-off-by: Yinghai Lu <yinghai@kernel.org> LKML-Reference: <4B0BB9F2.70907@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-11-10x86: apic: Do not use stacked physid_mask_tCyrill Gorcunov
We should not use physid_mask_t as a stack based variable in apic code. This type depends on MAX_APICS parameter which may be huge enough. Especially it became a problem with apic NOOP driver which is portable between 32 bit and 64 bit environment (where we have really huge MAX_APICS). So apic driver should operate with pointers and a caller in turn should aware of allocation physid_mask_t variable. As a side (but positive) effect -- we may use already implemented physid_set_mask_of_physid function eliminating default_apicid_to_cpu_present completely. Note that physids_coerce and physids_promote turned into static inline from macro (since macro hides the fact that parameter is being interpreted as unsigned long, make it explicit). Signed-off-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> LKML-Reference: <20091109220659.GA5568@lenovo> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-31x86: apic namespace cleanupThomas Gleixner
boot_cpu_physical_apicid is a global variable and used as function argument as well. Rename the function arguments to avoid confusion. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-31x86: Add timer_init to x86_init_opsThomas Gleixner
The timer init code is convoluted with several quirks and the paravirt timer chooser. Figuring out which code path is actually taken is not for the faint hearted. Move the numaq TSC quirk to tsc_pre_init x86_init_ops function and replace the paravirt time chooser and the remaining x86 quirk with a simple x86_init_ops function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-31x86: Move traps_init to x86_init_opsThomas Gleixner
Replace the quirks by a simple x86_init_ops function. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-31x86: Move irq_init to x86_init_opsThomas Gleixner
irq_init is overridden by x86_quirks and by paravirts. Unify the whole mess and make it an unconditional x86_init_ops function which defaults to the standard function and can be overridden by the early platform code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-31x86: Move pre_intr_init to x86_init_opsThomas Gleixner
Replace the quirk machinery by a x86_init_ops function which defaults to the standard implementation. This is also a preparatory patch for Moorestown support which needs to replace the default init_ISA_irqs as well. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-31x86: Move get/find_smp_config to x86_init_opsThomas Gleixner
Replace the quirk machinery by a x86_init_ops function which defaults to the standard implementation. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27x86: Move oem_bus_info to x86_init_opsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27x86: Move mpc_oem_pci_bus to x86_init_opsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27x86: Move smp_read_mpc_oem to x86_init_ops.Thomas Gleixner
Move smp_read_mpc_oem from quirks to x86_init. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27x86: Move mpc_apic_id to x86_init_opsThomas Gleixner
The mpc_apic_id setup is handled by a x86_quirk. Make it a x86_init_ops function with a default implementation. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27x86: Move ioapic_ids_setup to x86_init_opsThomas Gleixner
32bit and also the numaq code have special requirements on the ioapic_id setup. Convert it to a x86_init_ops function and get rid of the quirks and #ifdefs Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27x86: Sanitize smp_record and move it to x86_init_opsThomas Gleixner
The x86 quirkification introduced an extra ugly hackery with a variable pointer in the mpparse code. If the pointer is initialized then it is dereferenced and the variable set to 0 or incremented. Create a x86_init_ops function and let the affected numaq code hold the function. Default init is a setup noop. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-08-27x86: Move memory_setup to x86_init_opsThomas Gleixner
memory_setup is overridden by x86_quirks and by paravirts with weak functions and quirks. Unify the whole mess and make it an unconditional x86_init_ops function which defaults to the standard function and can be overridden by the early platform code. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2009-07-13x86, apic: Fix false positive section mismatch in numaq_32.cRakib Mullick
The variable apic_numaq placed in noninit section references the function wakeup_secondary_cpu_via_nmi(), which is in __cpuinit section. Thus causes a section mismatch warning. To avoid such mismatch we mark apic_numaq as __refdata. We were warned by the following warning: WARNING: arch/x86/kernel/built-in.o(.data+0x932c): Section mismatch in reference from the variable apic_numaq to the function .cpuinit.text:wakeup_secondary_cpu_via_nmi() Signed-off-by: Rakib Mullick <rakib.mullick@gmail.com> LKML-Reference: <b9df5fa10907120407p6b4f67dtf4d563155488188a@mail.gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-13cpumask: remove x86 cpumask_t uses.Rusty Russell
Impact: cleanup We are removing cpumask_t in favour of struct cpumask: mainly as a marker of what code is now CONFIG_CPUMASK_OFFSTACK-safe. The only non-trivial change here is vector_allocation_domain(): explicitly clear the mask and set the first word, rather than using assignment. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-13cpumask: remove cpumask_t assignment from vector_allocation_domain()Rusty Russell
Impact: cleanup It's not legal to do assignments into cpumask_var_t; they will soon be of variable length. So explicitly clear the mask and set the first word, rather than using assignment. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-03-13cpumask: remove dangerous CPU_MASK_ALL_PTR, &CPU_MASK_ALL.: x86Rusty Russell
Impact: cleanup (Thanks to Al Viro for reminding me of this, via Ingo) CPU_MASK_ALL is the (deprecated) "all bits set" cpumask, defined as so: #define CPU_MASK_ALL (cpumask_t) { { ... } } Taking the address of such a temporary is questionable at best, unfortunately 321a8e9d (cpumask: add CPU_MASK_ALL_PTR macro) added CPU_MASK_ALL_PTR: #define CPU_MASK_ALL_PTR (&CPU_MASK_ALL) Which formalizes this practice. One day gcc could bite us over this usage (though we seem to have gotten away with it so far). So replace everywhere which used &CPU_MASK_ALL or CPU_MASK_ALL_PTR with the modern "cpu_all_mask" (a real const struct cpumask *), and remove CPU_MASK_ALL_PTR altogether. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: Ingo Molnar <mingo@elte.hu> Reported-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Mike Travis <travis@sgi.com>
2009-03-02x86_32: apic/numaq_32, fix section mismatchJiri Slaby
Remove __cpuinitdata section placement for translation_table structure, since it is referenced from a functions within .text. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: H. Peter Anvin <hpa@zytor.com>
2009-02-26x86: apic: simplify secondary CPU wakeup methodsIngo Molnar
Impact: cleanup - rename apic->wakeup_cpu to apic->wakeup_secondary_cpu, to make it apparent that this is an SMP-only method - handle NULL ->wakeup_secondary_cpus to mean the default INIT wakeup sequence - this allows simplification of the APIC driver templates. Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-26x86: remove update_apic from x86_quirksYinghai Lu
Impact: cleanup x86_quirks->update_apic() calling looks crazy. so try to remove it: 1. every apic take wakeup_cpu member directly 2. separate es7000_apic to es7000_apic_cluster 3. use uv_wakeup_cpu directly Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-17x86, apic: move remaining APIC drivers to arch/x86/kernel/apic/*Ingo Molnar
Move the 32-bit extended-arch APIC drivers to arch/x86/kernel/apic/ too, and rename apic_64.c to probe_64.c. Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-17 22:16:15 +0000