summaryrefslogtreecommitdiffstats
path: root/arch/s390/kernel/vmlinux.lds.S
AgeCommit message (Collapse)Author
2012-01-18[S390] cleanup entry point definitionChristian Borntraeger
The vmlinux file for s390 contains a currently unused entry point, which is specified in two different locations: the linker script and the makefile. As it happens both definitions are different and the linker file is broken (_start does not exist) and the makefile specifies an entry point which makes no sense (the SALIPL loader entry point). So lets get rid of one definition (the makefile) and use the entry point of all other ipl methods (0x10000 -> startup) to be consistent. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-11-14[S390] incorrect note program headerMartin Schwidefsky
'readelf -n' on the s390 vmlinux file generates lots of warnings about corrupt notes. The reason is that the 'NOTE' program header has incorrect file and memory sizes. The problem is that the section following the NOTES section do not switch to a different phdr and they get added to the NOTE program section. Add a dummy entry to the linker script that switches to the data phdr before the start of the RODATA section. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2011-03-24percpu: Always align percpu output section to PAGE_SIZETejun Heo
Percpu allocator honors alignment request upto PAGE_SIZE and both the percpu addresses in the percpu address space and the translated kernel addresses should be aligned accordingly. The calculation of the former depends on the alignment of percpu output section in the kernel image. The linker script macros PERCPU_VADDR() and PERCPU() are used to define this output section and the latter takes @align parameter. Several architectures are using @align smaller than PAGE_SIZE breaking percpu memory alignment. This patch removes @align parameter from PERCPU(), renames it to PERCPU_SECTION() and makes it always align to PAGE_SIZE. While at it, add PCPU_SETUP_BUG_ON() checks such that alignment problems are reliably detected and remove percpu alignment comment recently added in workqueue.c as the condition would trigger BUG way before reaching there. For um, this patch raises the alignment of percpu area. As the area is in .init, there shouldn't be any noticeable difference. This problem was discovered by David Howells while debugging boot failure on mn10300. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: uclinux-dist-devel@blackfin.uclinux.org Cc: David Howells <dhowells@redhat.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: user-mode-linux-devel@lists.sourceforge.net
2011-01-25percpu: align percpu readmostly subsection to cachelineTejun Heo
Currently percpu readmostly subsection may share cachelines with other percpu subsections which may result in unnecessary cacheline bounce and performance degradation. This patch adds @cacheline parameter to PERCPU() and PERCPU_VADDR() linker macros, makes each arch linker scripts specify its cacheline size and use it to align percpu subsections. This is based on Shaohua's x86 only patch. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Shaohua Li <shaohua.li@intel.com>
2009-10-06[S390] Enable kmemleak on s390.Heiko Carstens
Also increase the maximum possible kmemleak early log entries since 2000 are not sufficient on s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-15Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (46 commits) powerpc64: convert to dynamic percpu allocator sparc64: use embedding percpu first chunk allocator percpu: kill lpage first chunk allocator x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA percpu: update embedding first chunk allocator to handle sparse units percpu: use group information to allocate vmap areas sparsely vmalloc: implement pcpu_get_vm_areas() vmalloc: separate out insert_vmalloc_vm() percpu: add chunk->base_addr percpu: add pcpu_unit_offsets[] percpu: introduce pcpu_alloc_info and pcpu_group_info percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward percpu: add @align to pcpu_fc_alloc_fn_t percpu: make @dyn_size mandatory for pcpu_setup_first_chunk() percpu: drop @static_size from first chunk allocators percpu: generalize first chunk allocator selection percpu: build first chunk allocators selectively percpu: rename 4k first chunk allocator to page percpu: improve boot messages percpu: fix pcpu_reclaim() locking ... Fix trivial conflict as by Tejun Heo in kernel/sched.c
2009-09-11[S390] clean up linker script using new linker script macros.Nelson Elhage
Note that this patch moves .data.init_task inside _edata. In addition, the alignment of .init.ramfs changes: It is now PAGE_ALIGNED and __initramfs_end is arbitrarily aligned; Previously it was only aligned to a 0x100-byte boundary, and always ended on an even byte. This change results in fewer output sections and in some data being reordered, but should have no functional effect. Signed-off-by: Nelson Elhage <nelhage@ksplice.com> Signed-off-by: Tim Abbott <tabbott@ksplice.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-s390@vger.kernel.org Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-09-11[S390] Use macros for .data.page_aligned.Tim Abbott
.data.page_aligned should not need a separate output section, so as part of this cleanup I moved into the .data output section in the linker scripts in order to eliminate unnecessary references to the section name. Remove the reference to .data.idt, since nothing is put into the .data.idt section on the s390 architecture. It looks like Cyrill Gorcunov posted a patch to remove the .data.idt code on s390 previously: <http://lkml.indiana.edu/hypermail/linux/kernel/0802.2/2536.html> CCing him and the people who acked that patch in case there's a reason it wasn't applied. Signed-off-by: Tim Abbott <tabbott@ksplice.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-07-09linker script: unify usage of discard definitionTejun Heo
Discarded sections in different archs share some commonality but have considerable differences. This led to linker script for each arch implementing its own /DISCARD/ definition, which makes maintaining tedious and adding new entries error-prone. This patch makes all linker scripts to move discard definitions to the end of the linker script and use the common DISCARDS macro. As ld uses the first matching section definition, archs can include default discarded sections by including them earlier in the linker script. ia64 is notable because it first throws away some ia64 specific subsections and then include the rest of the sections into the final image, so those sections must be discarded before the inclusion. defconfig compile tested for x86, x86-64, powerpc, powerpc64, ia64, alpha, sparc, sparc64 and s390. Michal Simek tested microblaze. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Paul Mundt <lethal@linux-sh.org> Acked-by: Mike Frysinger <vapier@gentoo.org> Tested-by: Michal Simek <monstr@monstr.eu> Cc: linux-arch@vger.kernel.org Cc: Michal Simek <monstr@monstr.eu> Cc: microblaze-uclinux@itee.uq.edu.au Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Tony Luck <tony.luck@intel.com>
2009-06-24linker script: throw away .discard sectionTejun Heo
x86 throws away .discard section but no other archs do. Also, .discard is not thrown away while linking modules. Make every arch and module linking throw it away. This will be used to define dummy variables for percpu declarations and definitions. This patch is based on Ivan Kokshaysky's alpha percpu patch. [ Impact: always throw away everything in .discard ] Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Bryan Wu <cooloney@kernel.org> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Tony Luck <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David S. Miller <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Chris Zankel <chris@zankel.net> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Ingo Molnar <mingo@elte.hu>
2009-06-12[S390] ftrace: add function graph tracer supportHeiko Carstens
Function graph tracer support for s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-04-26s390: convert to use __HEAD and HEAD_TEXT macros.Tim Abbott
This has the consequence of changing the section name use for head code from ".text.head" to ".head.text". Since this commit changes all users in the architecture, this change should be harmless. Signed-off-by: Tim Abbott <tabbott@mit.edu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-26[S390] Fix hypervisor detection for KVMChristian Borntraeger
Currently we use the cpuid (via STIDP instruction) to recognize LPAR, z/VM and KVM. The architecture states, that bit 0-7 of STIDP returns all zero, and if STIDP is executed in a virtual machine, the VM operating system will replace bits 0-7 with FF. KVM should not use FE to distinguish z/VM from KVM for interested guests. The proper way to detect the hypervisor is the STSI (Store System Information) instruction, which return information about the hypervisors via function code 3, selector1=2, selector2=2. This patch changes the detection routine of Linux to use STSI instead of STIDP. This detection is earlier than bootmem, we have to use a static buffer. Since STSI expects a 4kb block (4kb aligned) this patch also changes the init.data alignment for s390. As this section will be freed during boot, this should be no problem. Patch is tested with LPAR, z/VM, KVM on LPAR, and KVM under z/VM. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-11-27[S390] Fix alignment of initial kernel stack.Heiko Carstens
We need an alignment of 16384 bytes for the initial kernel stack if the kernel is configured for 16384 bytes stacks but the linker script currently guarantees only an alignment of 8192 bytes. So fix this and simply use THREAD_SIZE as alignment value which will always do the right thing. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-25[S390] Fix linker script.Heiko Carstens
6360b1fbb4a939efd34fc770c2ebd927c55506e0 ("move BUG_TABLE into RODATA") causes this build bug (binutils 2.18.50.0.8.20080709, gcc 4.3.1): AS .tmp_kallsyms1.o LD .tmp_vmlinux2 KSYM .tmp_kallsyms2.S s390x-4.3.1-nm: .tmp_vmlinux2: File truncated No valid symbol. make: *** [.tmp_kallsyms2.S] Error 1 So fix this. Cc: Jan Beulich <jbeulich@novell.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-05-25move BUG_TABLE into RODATAJan Beulich
Signed-off-by: Jan Beulich <jbeulich@novell.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-05[S390] Fix linker script.Heiko Carstens
Fixes this warning: vmlinux: warning: allocated section `.text' not in segment Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-28all archs: consolidate init and exit sections in vmlinux.lds.hSam Ravnborg
This patch consolidate all definitions of .init.text, .init.data and .exit.text, .exit.data section definitions in the generic vmlinux.lds.h. This is a preparational patch - alone it does not buy us much good. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-26[S390] Move NOTES and BUG_TABLE.Martin Schwidefsky
Move the NOTES and BUG_TABLE section in the linker script to the read-only sections right after the text section. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-12[S390] s390: use PAGE_SIZE in vmlinux.ldsSam Ravnborg
Replace the hardcoded 4096 value with the PAGE_SIZE macro. Converted a few decimal numbers to readable hex numbers. Use of PAGE_SIZE required a small change to page.h to allow PAGE_SIZE to be used from assembler/linker scripts. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-10-12[S390] s390: beautify vmlinux.ldsSam Ravnborg
Introduce a consistent style in vmlinux.lds. This style is gradually being introduced for all archs. A few lables were moved inside the section definition so they are assigned the correct value of gcc decide to align the content to another address than the one . has. In the past this has fixed several bugs but for s390 it will not impact due to all the alignmnet already introduced. Stabs definitions are consolidated in asm-generic/vmlinux.lds.h This patch also introduce support for DWARF - without knowing if this makes sense for s390. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27[S390] Get rid of new section mismatch warnings.Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-19s390: Put allocated ELF notes in read-only data segmentRoland McGrath
This changes the s390 linker script to use the asm-generic NOTES macro so that ELF note sections with SHF_ALLOC set are linked into the kernel image along with other read-only data. The PT_NOTE also points to their location. This paves the way for putting useful build-time information into ELF notes that can be found easily later in a kernel memory dump. Signed-off-by: Roland McGrath <roland@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19define new percpu interface for shared dataFenghua Yu
per cpu data section contains two types of data. One set which is exclusively accessed by the local cpu and the other set which is per cpu, but also shared by remote cpus. In the current kernel, these two sets are not clearely separated out. This can potentially cause the same data cacheline shared between the two sets of data, which will result in unnecessary bouncing of the cacheline between cpus. One way to fix the problem is to cacheline align the remotely accessed per cpu data, both at the beginning and at the end. Because of the padding at both ends, this will likely cause some memory wastage and also the interface to achieve this is not clean. This patch: Moves the remotely accessed per cpu data (which is currently marked as ____cacheline_aligned_in_smp) into a different section, where all the data elements are cacheline aligned. And as such, this differentiates the local only data and remotely accessed data cleanly. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Christoph Lameter <clameter@sgi.com> Cc: <linux-arch@vger.kernel.org> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-19all-archs: consolidate .data section definition in asm-genericSam Ravnborg
With this consolidation we can now modify the .data section definition in one spot for all archs. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-19all-archs: consolidate .text section definition in asm-genericSam Ravnborg
Move definition of .text section to asm-generic. Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-05-02[PATCH] x86: Allow percpu variables to be page-alignedJeremy Fitzhardinge
Let's allow page-alignment in general for per-cpu data (wanted by Xen, and Ingo suggested KVM as well). Because larger alignments can use more room, we increase the max per-cpu memory to 64k rather than 32k: it's getting a little tight. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Jeremy Fitzhardinge <jeremy@xensource.com> Signed-off-by: Andi Kleen <ak@suse.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2007-04-27[S390] Use generic bug.Heiko Carstens
Generic bug implementation for s390. Will increase the value of the console output on BUG() statements since registers r0-r5,r14 will not be clobbered by a printk() call that was previously done before the illegal instruction of BUG() was hit. Also implements an architecture specific WARN_ON(). Output of that could be increased but requires common code change. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-02-11[PATCH] disable init/initramfs.c: architecturesJean-Paul Saman
Update all arch/*/kernel/vmlinux.lds.S to not include space for initramfs when CONFIG_BLK_DEV_INITRAMFS is not selected. This saves another 4 kbytes on most platfoms (some reserve PAGE_SIZE for initramfs). Signed-off-by: Jean-Paul Saman <jean-paul.saman@nxp.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-05[S390] Mark kernel text section read-only.Heiko Carstens
Set read-only flag in the page table entries for the kernel image text section. This will catch all instruction caused corruptions withing the text section. Instruction replacement via kprobes still works, since it bypasses now dynamic address translation. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-05[S390] boot from NSS supportHongjie Yang
Add support to boot from a named saved segment (NSS). Signed-off-by: Hongjie Yang <hongjie@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-10-27[PATCH] vmlinux.lds: consolidate initcall sectionsAndrew Morton
Add a vmlinux.lds.h helper macro for defining the eight-level initcall table, teach all the architectures to use it. This is a prerequisite for a patch which performs initcall synchronisation for multithreaded-probing. Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> [ Added AVR32 as well ] Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-20[S390] __exit cleanup.Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-20[S390] add kprobes support.Michael Grundy
Signed-off-by: Michael Grundy <grundym@us.ibm.com> Signed-off-by: David Wilder <dwilder@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-04-28[PATCH] s390: add read_mostly optimizationChristian Borntraeger
Add a read_mostly section and define __read_mostly to prevent cache line pollution due to writes for mostly read variables. In addition fix the incorrect alignment of the cache_line_aligned data section. s390 has a cacheline size of 256 bytes. Signed-off-by: Christian Borntraeger <cborntra@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] s390: cleanup KconfigMartin Schwidefsky
Sanitize some s390 Kconfig options. We have ARCH_S390, ARCH_S390X, ARCH_S390_31, 64BIT, S390_SUPPORT and COMPAT. Replace these 6 options by S390, 64BIT and COMPAT. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2v2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!