summaryrefslogtreecommitdiffstats
path: root/arch/powerpc/Kconfig.debug
AgeCommit message (Collapse)Author
2012-07-10powerpc: IOMMU fault injectionAnton Blanchard
Add the ability to inject IOMMU faults. We enable this per device via a fail_iommu sysfs property, similar to fault injection on other subsystems. An example: ... 0003:01:00.1 Ethernet controller: Emulex Corporation OneConnect 10Gb NIC (be3) (rev 02) To inject one error to this device: echo 1 > /sys/bus/pci/devices/0003:01:00.1/fail_iommu echo 1 > /sys/kernel/debug/fail_iommu/probability echo 1 > /sys/kernel/debug/fail_iommu/times As feared, the first failure injected on the be3 results in an unrecoverable error, taking down both functions of the card permanently: be2net 0003:01:00.1: Unrecoverable error in the card Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2012-03-29irqdomain: Remove powerpc dependency from debugfs fileGrant Likely
The debugfs code is really generic for all platforms. This patch removes the powerpc-specific directory reference and makes it available to all architectures. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2012-02-27powerpc: remove CONFIG_PPC_ISERIES from the architecture Kconfig filesStephen Rothwell
After this, we can remove the legacy iSeries code more easily. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-11-28powerpc: Implement CONFIG_STRICT_DEVMEMsukadev@linux.vnet.ibm.com
As described in the help text in the patch, this token restricts general access to /dev/mem as a way of increasing the security. Specifically, access to exclusive IOMEM and kernel RAM is denied unless CONFIG_STRICT_DEVMEM is set to 'n'. Implement the 'devmem_is_allowed()' interface for Powerpc. It will be called from range_is_allowed() when userpsace attempts to access /dev/mem. This patch is based on an earlier patch from Steve Best and with input from Paul Mackerras and Scott Wood. [BenH] Fixed a typo or two and removed the generic change which should be submitted as a separate patch Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/powernv: Support for OPAL consoleBenjamin Herrenschmidt
This adds a udbg and an hvc console backend for supporting a console using the OPAL console interfaces. On OPAL v1 we have hvc0 mapped to whatever console the system was configured for (network or hvsi serial port) via the service processor. On OPAL v2 we have hvcN mapped to the Nth console provided by OPAL which generally corresponds to: hvc0 : network console (raw protocol) hvc1 : serial port S1 (hvsi) hvc2 : serial port S2 (hvsi) Note: At this point, early debug console only works with OPAL v1 and shouldn't be enabled in a normal kernel. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/udbg: Fix Kconfig entry for avoiding 44x early debug with KVMBenjamin Herrenschmidt
It was preventing the global early debug selection whenever KVM was enabled instead of only preventing the 440 specific one. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-09-20powerpc/ps3: Add gelic udbg driverHector Martin
Add a new udbg driver for the PS3 gelic Ehthernet device. This driver shares only a few stucture and constant definitions with the gelic Ethernet device driver, so is implemented as a stand-alone driver with no dependencies on the gelic Ethernet device driver. Signed-off-by: Hector Martin <hector@marcansoft.com> Signed-off-by: Andre Heider <a.heider@gmail.com> Signed-off-by: Geoff Levand <geoff@infradead.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-06-29powerpc/pseries: Re-implement HVSI as part of hvc_vioBenjamin Herrenschmidt
On pseries machines, consoles are provided by the hypervisor using a low level get_chars/put_chars type interface. However, this is really just a transport to the service processor which implements them either as "raw" console (networked consoles, HMC, ...) or as "hvsi" serial ports. The later is a simple packet protocol on top of the raw character interface that is supposed to convey additional "serial port" style semantics. In practice however, all it does is provide a way to read the CD line and set/clear our DTR line, that's it. We currently implement the "raw" protocol as an hvc console backend (/dev/hvcN) and the "hvsi" protocol using a separate tty driver (/dev/hvsi0). However this is quite impractical. The arbitrary difference between the two type of devices has been a major source of user (and distro) confusion. Additionally, there's an additional mini -hvsi implementation in the pseries platform code for our low level debug console and early boot kernel messages, which means code duplication, though that low level variant is impractical as it's incapable of doing the initial protocol negociation to establish the link to the FSP. This essentially replaces the dedicated hvsi driver and the platform udbg code completely by extending the existing hvc_vio backend used in "raw" mode so that: - It now supports HVSI as well - We add support for hvc backend providing tiocm{get,set} - It also provides a udbg interface for early debug and boot console This is overall less code, though this will only be obvious once we remove the old "hvsi" driver, which is still available for now. When the old driver is enabled, the new code still kicks in for the low level udbg console, replacing the old mini implementation in the platform code, it just doesn't provide the higher level "hvc" interface. In addition to producing generally simler code, this has several benefits over our current situation: - The user/distro only has to deal with /dev/hvcN for the hypervisor console, avoiding all sort of confusion that has plagued us in the past - The tty, kernel and low level debug console all use the same code base which supports the full protocol establishment process, thus the console is now available much earlier than it used to be with the old HVSI driver. The kernel console works much earlier and udbg is available much earlier too. Hackers can enable a hard coded very-early debug console as well that works with HVSI (previously that was only supported for the "raw" mode). I've tried to keep the same semantics as hvsi relative to how I react to things like CD changes, with some subtle differences though: - I clear DTR on close if HUPCL is set - Current hvsi triggers a hangup if it detects a up->down transition on CD (you can still open a console with CD down). My new implementation triggers a hangup if the link to the FSP is severed, and severs it upon detecting a up->down transition on CD. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-05-25lib: consolidate DEBUG_STACK_USAGE optionStephen Boyd
Most arches define CONFIG_DEBUG_STACK_USAGE exactly the same way. Move it to lib/Kconfig.debug so each arch doesn't have to define it. This obviously makes the option generic, but that's fine because the config is already used in generic code. It's not obvious to me that sysrq-P actually does anything caution by keeping the most inclusive wording. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Chris Metcalf <cmetcalf@tilera.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Richard Weinberger <richard@nod.at> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Hirokazu Takata <takata@linux-m32r.org> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: Lennox Wu <lennox.wu@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-25lib: consolidate DEBUG_PER_CPU_MAPSStephen Boyd
DEBUG_PER_CPU_MAPS is used in lib/cpumask.c as well as in inlcude/linux/cpumask.h and thus it has outgrown its use within x86 and powerpc alone. Any arch with SMP support may want to get some more debugging, so make this option generic. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: <linux-arch@vger.kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-05-06powerpc: Add early debug for WSP platformsJack Miller
Signed-off-by: Jack Miller <jack@codezen.org> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-06-15powerpc: Unconditionally enabled irq stacksChristoph Hellwig
Irq stacks provide an essential protection from stack overflows through external interrupts, at the cost of two additionals stacks per CPU. Enable them unconditionally to simplify the kernel build and prevent people from accidentally disabling them. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2010-05-06powerpc/cpumask: Add DEBUG_PER_CPU_MAPS optionAnton Blanchard
Enable the DEBUG_PER_CPU_MAPS option so we can look for problems with cpumasks . Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-12-16Merge branch 'next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'next' of git://git.secretlab.ca/git/linux-2.6: (23 commits) powerpc: fix up for mmu_mapin_ram api change powerpc: wii: allow ioremap within the memory hole powerpc: allow ioremap within reserved memory regions wii: use both mem1 and mem2 as ram wii: bootwrapper: add fixup to calc useable mem2 powerpc: gamecube/wii: early debugging using usbgecko powerpc: reserve fixmap entries for early debug powerpc: wii: default config powerpc: wii: platform support powerpc: wii: hollywood interrupt controller support powerpc: broadway processor support powerpc: wii: bootwrapper bits powerpc: wii: device tree powerpc: gamecube: default config powerpc: gamecube: platform support powerpc: gamecube/wii: flipper interrupt controller support powerpc: gamecube/wii: udbg support for usbgecko powerpc: gamecube/wii: do not include PCI support powerpc: gamecube/wii: declare as non-coherent platforms powerpc: gamecube/wii: introduce GAMECUBE_COMMON ... Fix up conflicts in arch/powerpc/mm/fsl_booke_mmu.c. Hopefully even close to correctly.
2009-12-12powerpc: gamecube/wii: early debugging using usbgeckoAlbert Herranz
Add support for using the USB Gecko adapter as an early debugging console on the Nintendo GameCube and Wii video game consoles. The USB Gecko is a 3rd party memory card interface adapter that provides a EXI (External Interface) to USB serial converter. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2009-10-28powerpc: tracing: Add hypervisor call tracepointsAnton Blanchard
Add hcall_entry and hcall_exit tracepoints. This replaces the inline assembly HCALL_STATS code and converts it to use the new tracepoints. To keep the disabled case as quick as possible, we embed a status word in the TOC so we can get at it with a single load. By doing so we keep the overhead at a minimum. Time taken for a null hcall: No tracepoint code: 135.79 cycles Disabled tracepoints: 137.95 cycles For reference, before this patch enabling HCALL_STATS resulted in a null hcall of 201.44 cycles! Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2009-06-16powerpc: Add configurable -Werror for arch/powerpcMichael Ellerman
Add the option to build the code under arch/powerpc with -Werror. The intention is to make it harder for people to inadvertantly introduce warnings in the arch/powerpc code. It needs to be configurable so that if a warning is introduced, people can easily work around it while it's being fixed. The option is a negative, ie. don't enable -Werror, so that it will be turned on for allyes and allmodconfig builds. The default is n, in the hope that developers will build with -Werror, that will probably lead to some build breaks, I am prepared to be flamed. It's not enabled for math-emu, which is a steaming pile of warnings. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-05-21powerpc: Keep track of emulated instructionsGeert Uytterhoeven
If CONFIG_PPC_EMULATED_STATS is enabled, make available counters for the various classes of emulated instructions under /sys/kernel/debug/powerpc/emulated_instructions/ (assumed debugfs is mounted on /sys/kernel/debug). Optionally (controlled by /sys/kernel/debug/powerpc/emulated_instructions/do_warn), rate-limited warnings can be printed to the console when instructions are emulated. Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2009-04-02generic debug pagealloc: build fixAkinobu Mita
This fixes a build failure with generic debug pagealloc: mm/debug-pagealloc.c: In function 'set_page_poison': mm/debug-pagealloc.c:8: error: 'struct page' has no member named 'debug_flags' mm/debug-pagealloc.c: In function 'clear_page_poison': mm/debug-pagealloc.c:13: error: 'struct page' has no member named 'debug_flags' mm/debug-pagealloc.c: In function 'page_poison': mm/debug-pagealloc.c:18: error: 'struct page' has no member named 'debug_flags' mm/debug-pagealloc.c: At top level: mm/debug-pagealloc.c:120: error: redefinition of 'kernel_map_pages' include/linux/mm.h:1278: error: previous definition of 'kernel_map_pages' was here mm/debug-pagealloc.c: In function 'kernel_map_pages': mm/debug-pagealloc.c:122: error: 'debug_pagealloc_enabled' undeclared (first use in this function) by fixing - debug_flags should be in struct page - define DEBUG_PAGEALLOC config option for all architectures Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-01generic debug pageallocAkinobu Mita
CONFIG_DEBUG_PAGEALLOC is now supported by x86, powerpc, sparc64, and s390. This patch implements it for the rest of the architectures by filling the pages with poison byte patterns after free_pages() and verifying the poison patterns before alloc_pages(). This generic one cannot detect invalid page accesses immediately but invalid read access may cause invalid dereference by poisoned memory and invalid write access can be detected after a long delay. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-03-11powerpc/kconfig: Kill PPC_MULTIPLATFORMBenjamin Herrenschmidt
CONFIG_PPC_MULTIPLATFORM is a remain of the pre-powerpc days and isn't really meaningful anymore. It was basically equivalent to PPC64 || 6xx. This removes it along with the following changes: - 32-bit platforms that relied on PPC32 && PPC_MULTIPLATFORM now rely on 6xx which is what they want anyway. - A new symbol, PPC_BOOK3S, is defined that represent compliance with the "Server" variant of the architecture. This is set when either 6xx or PPC64 is set and open the door for future BOOK3E 64-bit. - 64-bit platforms that relied on PPC64 && PPC_MULTIPLATFORM now use PPC64 && PPC_BOOK3S - A separate and selectable CONFIG_PPC_OF_BOOT_TRAMPOLINE option is now used to control the use of prom_init.c Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2008-12-03powerpc: Allow the max stack trace depth to be configuredJohannes Berg
On my screen, when something crashes, I only have space for maybe 16 functions of the stack trace before the information above it scrolls off the screen. It's easy to hack the kernel to print out only that much, but it's harder to remember to do it. This introduces a config option for it so that I can keep the setting in my config. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-20powerpc: Split-out common MSI bitmap logic into msi_bitmap.cMichael Ellerman
There are now two almost identical implementations of an MSI bitmap allocator, one in mpic_msi.c and the other in fsl_msi.c. Merge them together and put the result in msi_bitmap.c. Some of the MPIC bits will remain to provide a nicer interface for the MPIC users. In the process we fix two buglets. The first is that the allocation routines, now msi_bitmap_alloc_hwirqs(), returned an unsigned result, even though they use -1 to indicate allocation failure. Although all the callers were checking correctly, it is much better for the routine to just return an int. At least until someone wants > ~2 billion MSIs. The second buglet is that the device tree reservation logic only allowed power-of-two reservations. AFAICT that didn't effect any existing code but it's nicer if we can reserve arbitrary irqs from MSI use. We also add some selftests, which exposed the two buglets and now test for them, as well as some basic sanity tests. The tests are only built when CONFIG_DEBUG_KERNEL=y. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-08-04powerpc: Remove use of CONFIG_PPC_MERGEKumar Gala
Now that arch/ppc is gone and CONFIG_PPC_MERGE is always set, remove the dead code associated with !CONFIG_PPC_MERGE from arch/powerpc and include/asm-powerpc. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-23kgdb, powerpc: arch specific powerpc kgdb supportJason Wessel
This patch removes the old kgdb reminants from ARCH=powerpc and implements the new style arch specific stub for the common kgdb core interface. It is possible to have xmon and kgdb in the same kernel, but you cannot use both at the same time because there is only one set of debug hooks. The arch specific kgdb implementation saves the previous state of the debug hooks and restores them if you unconfigure the kgdb I/O driver. Kgdb should have no impact on a kernel that has no kgdb I/O driver configured. Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
2008-07-01powerpc: Add self-tests of the feature fixup codeMichael Ellerman
This commit adds tests of the feature fixup code, they are run during boot if CONFIG_FTR_FIXUP_SELFTEST=y. Some of the tests manually invoke the patching routines to check their behaviour, and others use the macros and so are patched during the normal patching done during boot. Because we have two sets of macros with different names, we use a macro to generate the test of the macros, very niiiice. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-07-01powerpc: Add tests of the code patching routinesMichael Ellerman
Add tests of the existing code patching routines, as well as the new routines added in the last commit. The self-tests are run late in boot when CONFIG_CODE_PATCHING_SELFTEST=y, which depends on DEBUG_KERNEL=y. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Acked-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-29[POWERPC] Add IRQSTACKS support on ppc32Kumar Gala
This makes it possible to use separate stacks for hard and soft IRQs on 32-bit powerpc as well as on 64-bit. The code for 32-bit is just the 32-bit analog of the 64-bit code. * Added allocation and initialization of the irq stacks. We limit the stacks to be in lowmem for ppc32. * Implemented ppc32 versions of call_do_softirq() and call_handle_irq() to switch the stack pointers * Reworked how we do stack overflow detection. We now keep around the limit of the stack in the thread_struct and compare against the limit to see if we've overflowed. We can now use this on ppc64 if desired. [ paulus@samba.org: Fixed bug on 6xx where we need to reload r9 with the thread_info pointer. ] Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2008-04-27KVM: ppc: PowerPC 440 KVM implementationHollis Blanchard
This functionality is definitely experimental, but is capable of running unmodified PowerPC 440 Linux kernels as guests on a PowerPC 440 host. (Only tested with 440EP "Bamboo" guests so far, but with appropriate userspace support other SoC/board combinations should work.) See Documentation/powerpc/kvm_440.txt for technical details. [stephen: build fix] Signed-off-by: Hollis Blanchard <hollisb@us.ibm.com> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Avi Kivity <avi@qumranet.com>
2008-04-17[POWERPC] cpm-serial: Relocate CPM buffer descriptors and SMC parameter ram.Laurent Pinchart
This patch relocates the buffer descriptors and the SMC parameter RAM at the end of the first CPM muram chunk, as described in the device tree. This allows device trees to stop excluding SMC parameter ram allocated by the boot loader from the CPM muram node. Signed-off-by: Laurent Pinchart <laurentp@cse-semaphore.com> Acked-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-12-23[POWERPC] 4xx: Base support for 440GX Taishan eval boardHugh Blemings
This patch adds base support for the AMCC Taishan 440GX evaluation board. Signed-off-by: Hugh Blemings <hugh@blemings.org> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-23[POWERPC] 4xx: Add early udbg support for 40x processorsBenjamin Herrenschmidt
This adds some basic real mode based early udbg support for 40x in order to debug things more easily Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-12-11[POWERPC] Early debug forces console log level to maxBenjamin Herrenschmidt
This makes the early debug option force the console loglevel to the max. The early debug option is meant to catch messages very early in the kernel boot process, in many cases, before the kernel has a chance to parse the "debug" command line argument. Thus it makes sense when CONFIG_PPC_EARLY_DEBUG is set, to force the console log level to the max at boot time. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-10-19[POWERPC] 4xx: Split early debug output and early boot console for 44xValentine Barshak
Currently there's no way to enable early boot console on PowerPC 44x not specifying uart's physical address in kernel config, which is used for very early debug messages. This patch splits very early debug output (which needs uart physical address in kernel config) and early boot console (which searches for uarts in the device tree using find_legacy_serial_ports). We enable early boot console for all 44x processors, while (dangerous) early debug is user-selectable. Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2007-10-12kconfig: syntax cleanup - drop support for "depends/requires/def_boolean"Adrian Bunk
Remove the following redundant and never or rarely used kconfig syntax: - "def_boolean" (same as "def_bool") - "requires" (same as "depends on") - "depends" (same as "depends on") This patch contains the code changes and Kconfig updates. The shipped files are in next patch to let actual codechange stand out. Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2007-10-04[POWERPC] cpm: Describe multi-user ram in its own device node.Scott Wood
The way the current CPM binding describes available multi-user (a.k.a. dual-ported) RAM doesn't work well when there are multiple free regions, and it doesn't work at all if the region doesn't begin at the start of the muram area (as the hardware needs to be programmed with offsets into this area). The latter situation can happen with SMC UARTs on CPM2, as its parameter RAM is relocatable, u-boot puts it at zero, and the kernel doesn't support moving it. It is now described with a muram node, similar to QE. The current CPM binding is sufficiently recent (i.e. never appeared in an official release) that compatibility with existing device trees is not an issue. The code supporting the new binding is shared between cpm1 and cpm2, rather than remain separated. QE should be able to use this code as well, once minor fixes are made to its device trees. Signed-off-by: Scott Wood <scottwood@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-10-03[POWERPC] Add early debug console for CPM serial ports.Scott Wood
This code assumes that the ports have been previously set up, with buffers in DPRAM. Signed-off-by: Scott Wood <scottwood@freescale.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-09-14[POWERPC] Export virq mapping via debugfsMichael Ellerman
This adds a debugfs file "powerpc/virq_mapping", which shows the virtual to real mapping of irq numbers. Enable it with CONFIG_VIRQ_DEBUG. Signed-off-by: Zhang Wei <wei.zhang@freescale.com> Signed-off-by: Chen Gong <G.Chen@freescale.com> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-07-29Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATIONRafael J. Wysocki
Replace CONFIG_SOFTWARE_SUSPEND with CONFIG_HIBERNATION to avoid confusion (among other things, with CONFIG_SUSPEND introduced in the next patch). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-26[POWERPC] Only allow building of BootX text support on PPC_MULTIPLATFORMKumar Gala
BootX text code is only supported on systems with real OF at this point which is PPC_OF && PPC_MULTIPLATFORM. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-05-09Fix trivial typos in Kconfig* filesDavid Sterba
Fix several typos in help text in Kconfig* files. Signed-off-by: David Sterba <dave@jikos.cz> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2007-05-08[POWERPC] Early serial debug support for PPC44xDavid Gibson
This adds support for early serial debugging via the built in port on IBM/AMCC PowerPC 44x CPUs. It uses a bolted TLB entry in address space 1 for the UART's mapping, allowing robust debugging both before and after the initialization of the MMU. Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] DEBUG_PAGEALLOC for 64-bitBenjamin Herrenschmidt
Here's an implementation of DEBUG_PAGEALLOC for 64 bits powerpc. It applies on top of the 32 bits patch. Unlike Anton's previous attempt, I'm not using updatepp. I'm removing the hash entries from the bolted mapping (using a map in RAM of all the slots). Expensive but it doesn't really matter, does it ? :-) Memory hot-added doesn't benefit from this unless it's added at an address that is below end_of_DRAM() as calculated at boot time. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> arch/powerpc/Kconfig.debug | 2 arch/powerpc/mm/hash_utils_64.c | 84 ++++++++++++++++++++++++++++++++++++++-- 2 files changed, 82 insertions(+), 4 deletions(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-04-13[POWERPC] DEBUG_PAGEALLOC for 32-bitBenjamin Herrenschmidt
Here's an implementation of DEBUG_PAGEALLOC for ppc32. It disables BAT mapping and is only tested with Hash table based processor though it shouldn't be too hard to adapt it to others. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> arch/powerpc/Kconfig.debug | 9 ++++++ arch/powerpc/mm/init_32.c | 4 +++ arch/powerpc/mm/pgtable_32.c | 52 +++++++++++++++++++++++++++++++++++++++ arch/powerpc/mm/ppc_mmu_32.c | 4 ++- include/asm-powerpc/cacheflush.h | 6 ++++ 5 files changed, 74 insertions(+), 1 deletion(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-03-22[POWERPC] Removed config options that we don't support in embedded6xxKumar Gala
When we started arch/powerpc we duplicated a number of config options from arch/ppc for various platforms that are supported. Now that we actually support a few platforms, remove all the ones that haven't been moved over. Additionally, this cleanup moved the 82xx/PQ2 options over into arch/powerpc/platforms/82xx/Kconfig where they belong. It also killed GEN550 which doesn't exist in arch/powerpc. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2007-02-07[POWERPC] pasemi: UART udbg supportOlof Johansson
Early debug output for PA Semi UART. Uses the 2.05 CI real mode ops. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-02-07[POWERPC] Celleb: basic supportIshizaki Kou
This patch adds base support for Celleb platform. Signed-off-by: Kou Ishizaki <kou.ishizaki@toshiba.co.jp> Acked-by: Arnd Bergmann <arnd.bergmann@de.ibm.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
2007-01-30[POWERPC] Enable stack debug features on ppc32Kumar Gala
Enable stack overflow checking (DEBUG_STACKOVERFLOW) and stack usage (DEBUG_STACK_USAGE) on ppc32. Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2006-12-04[POWERPC] Allow CONFIG_BOOTX_TEXT on iSeriesStephen Rothwell
and therefore combined builds. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-04[POWERPC] Allow xmon to build on legacy iSeriesStephen Rothwell
xmon still does not run on iSeries, but this allows us to build a combined kernel that includes it. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>