| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull sweeping late_initcall cleanup for arm-soc from Olof Johansson:
"This is a patch series from Shawn Guo that moves from individual
late_initcalls() to using a member in the machine structure to invoke
a platform's late initcalls.
This cleanup is a step in the move towards multiplatform kernels since
it would reduce the need to check for compatible platforms in each and
every initcall."
Fix up trivial conflicts in arch/arm/mach-{exynos/mach-universal_c210.c,
imx/mach-cpuimx51.c, omap2/board-generic.c} due to changes nearby (and,
in the case of cpuimx51.c the board support being deleted)
* tag 'cleanup-initcall' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: ux500: use machine specific hook for late init
ARM: tegra: use machine specific hook for late init
ARM: shmobile: use machine specific hook for late init
ARM: sa1100: use machine specific hook for late init
ARM: s3c64xx: use machine specific hook for late init
ARM: prima2: use machine specific hook for late init
ARM: pnx4008: use machine specific hook for late init
ARM: omap2: use machine specific hook for late init
ARM: omap1: use machine specific hook for late init
ARM: msm: use machine specific hook for late init
ARM: imx: use machine specific hook for late init
ARM: exynos: use machine specific hook for late init
ARM: ep93xx: use machine specific hook for late init
ARM: davinci: use machine specific hook for late init
ARM: provide a late_initcall hook for platform initialization
|
|
Pull arm-soc driver specific updates from Olof Johansson:
"These changes are specific to some driver that may be used by multiple
boards or socs. The most significant change in here is the move of
the samsung iommu code from a platform specific in-kernel interface to
the generic iommu subsystem."
Fix up trivial conflicts in arch/arm/mach-exynos/Kconfig
* tag 'drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (28 commits)
mmc: dt: Consolidate DT bindings
iommu/exynos: Add iommu driver for EXYNOS Platforms
ARM: davinci: optimize the DMA ISR
ARM: davinci: implement DEBUG_LL port choice
ARM: tegra: Add SMMU enabler in AHB
ARM: tegra: Add Tegra AHB driver
Input: pxa27x_keypad add choice to set direct_key_mask
Input: pxa27x_keypad direct key may be low active
Input: pxa27x_keypad bug fix for direct_key_mask
Input: pxa27x_keypad keep clock on as wakeup source
ARM: dt: tegra: pinmux changes for USB ULPI
ARM: tegra: add USB ULPI PHY reset GPIO to device tree
ARM: tegra: don't hard-code USB ULPI PHY reset_gpio
ARM: tegra: change pll_p_out4's rate to 24MHz
ARM: tegra: fix pclk rate
ARM: tegra: reparent sclk to pll_c_out1
ARM: tegra: Add pllc clock init table
ARM: dt: tegra cardhu: basic audio support
ARM: dt: tegra30.dtsi: Add audio-related nodes
ARM: tegra: add AUXDATA required for audio
...
|
|
Use for_each_set_bit_from to iterate over all the set bit in a memory
region.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Christian Riesch <christian.riesch@omicron.at>
Cc: Kevin Hilman <khilman@ti.com>
Cc: davinci-linux-open-source@linux.davincidsp.com
Cc: Russell King <linux@arm.linux.org.uk>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
The ISR does quiete a lot of hw access which could be avoided. First it
checks for a pending interrupt by reading alteast one register. Then it
checks for the "activated" slots by reading another register. This is
more or a less a must.
Now, once it found an active slot it does the same two reads again.
After that it "knows" that there must be a pending transfer however it
cross checks with the other register. There are 32 bit in an interger
which are polled instead of considering only the set bits and ignoring
those which are zero. This performs atleast 32 reads which could be
avoided. In case of a first match it does another read.
This patch reorganizes the access by re-using the register which have
been read and then uses ffs() to find the matching slot instead looping
over it. By doing this we get rid of the last (32 + 2 + hits) reads.
It is possible however that by really busy bank0 we never get to handle
bank1. If this is a problem, we could try to handle bank1 after we are
done with bank0 to check if there are any outstanding transfers.
To put some numbers on this, this is from spi transfer via spidev. The
first column is the number of total transfers, the time stamp is taken
before and after the ioctl():
|10000, min: 542us avg: 591us
|20000, min: 542us avg: 592us
|30000, min: 542us avg: 592us
|40000, min: 542us avg: 585us
|50000, min: 542us avg: 593us
The same test case with the patch applied
|10000, min: 444us avg: 493us
|20000, min: 444us avg: 491us
|30000, min: 444us avg: 489us
|40000, min: 444us avg: 491us
|50000, min: 444us avg: 492us
that is almost 100us that just went away.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Apart from the necessity to do this change for multi-platform kernels
the previous logic depended on the zImage decompressor to write the
physical and virtual address to a magic memory location.
If the decompressor is unused or not correctly configured for the
current machid, the addruart macro was an infinite loop. Moreover
debugging the early zImage code was not possible either.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
[nsekhar@ti.com: add braces in _DEBUG_LL_ENTRY() macro to fix checkpatch
error. Fix debug port choice config dependency for traditional DaVincis.
Modify debug port config names and add help text.]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Cc: Kevin Hilman <khilman@ti.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Sekhar Nori <nsekhar@ti.com>
|
|
This fixes:
WARNING: arch/arm/mach-davinci/built-in.o(.text+0x2d84): Section mismatch in reference from the function da850_evm_ui_expander_setup() to the (unknown reference) .init.data:(unknown)
The function da850_evm_ui_expander_setup() references
the (unknown reference) __initdata (unknown).
This is often because da850_evm_ui_expander_setup lacks a __initdata
annotation or the annotation of (unknown) is wrong.
Note this is a real issue because if the tca6416 driver only binds when
the init sections are already discarded da850_evm_ui_expander_setup is
called when da850_evm_devices might already be overwritten.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
spi_board_info is not modified in any of the spi registeration
functions and passed along as-is to the generic SPI layer.
Mark spi_board_info arguments as const to signal this.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
[nsekhar@ti.com: extended for dm365 and dm355]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
The PDCTL NEXT bit is incorrectly set to bit 1 instead of bit 0. This
patch fixes this issue
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull ACPI & Power Management changes from Len Brown:
- ACPI 5.0 after-ripples, ACPICA/Linux divergence cleanup
- cpuidle evolving, more ARM use
- thermal sub-system evolving, ditto
- assorted other PM bits
Fix up conflicts in various cpuidle implementations due to ARM cpuidle
cleanups (ARM at91 self-refresh and cpu idle code rewritten into
"standby" in asm conflicting with the consolidation of cpuidle time
keeping), trivial SH include file context conflict and RCU tracing fixes
in generic code.
* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: (77 commits)
ACPI throttling: fix endian bug in acpi_read_throttling_status()
Disable MCP limit exceeded messages from Intel IPS driver
ACPI video: Don't start video device until its associated input device has been allocated
ACPI video: Harden video bus adding.
ACPI: Add support for exposing BGRT data
ACPI: export acpi_kobj
ACPI: Fix logic for removing mappings in 'acpi_unmap'
CPER failed to handle generic error records with multiple sections
ACPI: Clean redundant codes in scan.c
ACPI: Fix unprotected smp_processor_id() in acpi_processor_cst_has_changed()
ACPI: consistently use should_use_kmap()
PNPACPI: Fix device ref leaking in acpi_pnp_match
ACPI: Fix use-after-free in acpi_map_lsapic
ACPI: processor_driver: add missing kfree
ACPI, APEI: Fix incorrect APEI register bit width check and usage
Update documentation for parameter *notrigger* in einj.txt
ACPI, APEI, EINJ, new parameter to control trigger action
ACPI, APEI, EINJ, limit the range of einj_param
ACPI, APEI, Fix ERST header length check
cpuidle: power_usage should be declared signed integer
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull "ARM: cleanups of io includes" from Olof Johansson:
"Rob Herring has done a sweeping change cleaning up all of the
mach/io.h includes, moving some of the oft-repeated macros to a common
location and removing a bunch of boiler plate. This is another step
closer to a common zImage for multiple platforms."
Fix up various fairly trivial conflicts (<mach/io.h> removal vs changes
around it, tegra localtimer.o is *still* gone, yadda-yadda).
* tag 'cleanup2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (29 commits)
ARM: tegra: Include assembler.h in sleep.S to fix build break
ARM: pxa: use common IOMEM definition
ARM: dma-mapping: convert ARCH_HAS_DMA_SET_COHERENT_MASK to kconfig symbol
ARM: __io abuse cleanup
ARM: create a common IOMEM definition
ARM: iop13xx: fix missing declaration of iop13xx_init_early
ARM: fix ioremap/iounmap for !CONFIG_MMU
ARM: kill off __mem_pci
ARM: remove bunch of now unused mach/io.h files
ARM: make mach/io.h include optional
ARM: clps711x: remove unneeded include of mach/io.h
ARM: dove: add explicit include of dove.h to addr-map.c
ARM: at91: add explicit include of hardware.h to uncompressor
ARM: ep93xx: clean-up mach/io.h
ARM: tegra: clean-up mach/io.h
ARM: orion5x: clean-up mach/io.h
ARM: davinci: remove unneeded mach/io.h include
[media] davinci: remove includes of mach/io.h
ARM: OMAP: Remove remaining includes for mach/io.h
ARM: msm: clean-up mach/io.h
...
|
|
Pull more ARM updates from Russell King.
This got a fair number of conflicts with the <asm/system.h> split, but
also with some other sparse-irq and header file include cleanups. They
all looked pretty trivial, though.
* 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (59 commits)
ARM: fix Kconfig warning for HAVE_BPF_JIT
ARM: 7361/1: provide XIP_VIRT_ADDR for no-MMU builds
ARM: 7349/1: integrator: convert to sparse irqs
ARM: 7259/3: net: JIT compiler for packet filters
ARM: 7334/1: add jump label support
ARM: 7333/2: jump label: detect %c support for ARM
ARM: 7338/1: add support for early console output via semihosting
ARM: use set_current_blocked() and block_sigmask()
ARM: exec: remove redundant set_fs(USER_DS)
ARM: 7332/1: extract out code patch function from kprobes
ARM: 7331/1: extract out insn generation code from ftrace
ARM: 7330/1: ftrace: use canonical Thumb-2 wide instruction format
ARM: 7351/1: ftrace: remove useless memory checks
ARM: 7316/1: kexec: EOI active and mask all interrupts in kexec crash path
ARM: Versatile Express: add NO_IOPORT
ARM: get rid of asm/irq.h in asm/prom.h
ARM: 7319/1: Print debug info for SIGBUS in user faults
ARM: 7318/1: gic: refactor irq_start assignment
ARM: 7317/1: irq: avoid NULL check in for_each_irq_desc loop
ARM: 7315/1: perf: add support for the Cortex-A7 PMU
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system
Pull "Disintegrate and delete asm/system.h" from David Howells:
"Here are a bunch of patches to disintegrate asm/system.h into a set of
separate bits to relieve the problem of circular inclusion
dependencies.
I've built all the working defconfigs from all the arches that I can
and made sure that they don't break.
The reason for these patches is that I recently encountered a circular
dependency problem that came about when I produced some patches to
optimise get_order() by rewriting it to use ilog2().
This uses bitops - and on the SH arch asm/bitops.h drags in
asm-generic/get_order.h by a circuituous route involving asm/system.h.
The main difficulty seems to be asm/system.h. It holds a number of
low level bits with no/few dependencies that are commonly used (eg.
memory barriers) and a number of bits with more dependencies that
aren't used in many places (eg. switch_to()).
These patches break asm/system.h up into the following core pieces:
(1) asm/barrier.h
Move memory barriers here. This already done for MIPS and Alpha.
(2) asm/switch_to.h
Move switch_to() and related stuff here.
(3) asm/exec.h
Move arch_align_stack() here. Other process execution related bits
could perhaps go here from asm/processor.h.
(4) asm/cmpxchg.h
Move xchg() and cmpxchg() here as they're full word atomic ops and
frequently used by atomic_xchg() and atomic_cmpxchg().
(5) asm/bug.h
Move die() and related bits.
(6) asm/auxvec.h
Move AT_VECTOR_SIZE_ARCH here.
Other arch headers are created as needed on a per-arch basis."
Fixed up some conflicts from other header file cleanups and moving code
around that has happened in the meantime, so David's testing is somewhat
weakened by that. We'll find out anything that got broken and fix it..
* tag 'split-asm_system_h-for-linus-20120328' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-asm_system: (38 commits)
Delete all instances of asm/system.h
Remove all #inclusions of asm/system.h
Add #includes needed to permit the removal of asm/system.h
Move all declarations of free_initmem() to linux/mm.h
Disintegrate asm/system.h for OpenRISC
Split arch_align_stack() out from asm-generic/system.h
Split the switch_to() wrapper out of asm-generic/system.h
Move the asm-generic/system.h xchg() implementation to asm-generic/cmpxchg.h
Create asm-generic/barrier.h
Make asm-generic/cmpxchg.h #include asm-generic/cmpxchg-local.h
Disintegrate asm/system.h for Xtensa
Disintegrate asm/system.h for Unicore32 [based on ver #3, changed by gxt]
Disintegrate asm/system.h for Tile
Disintegrate asm/system.h for Sparc
Disintegrate asm/system.h for SH
Disintegrate asm/system.h for Score
Disintegrate asm/system.h for S390
Disintegrate asm/system.h for PowerPC
Disintegrate asm/system.h for PA-RISC
Disintegrate asm/system.h for MN10300
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull "ARM: More SoC driver updates" from Olof Johansson:
"This branch contains a handful of driver updates, mostly to the
LPC32xx platform but also for Samsung EXYNOS and Davinci.
It had a few context conflicts against patches already merged through
fixes-non-critical. We should have resolved this early during the
development cycle by pulling them in as a dependency, instead I did it
after the fact this time."
* tag 'drivers2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
gpio/samsung: use ioremap() for EXYNOS4 GPIOlib
gpio/samsung: add support GPIOlib for EXYNOS5250
ARM: EXYNOS: add support GPIO for EXYNOS5250
ARM: LPC32xx: Ethernet support
ARM: LPC32xx: USB Support
ARM: davinci: dm644x evm: add support for VPBE display
ARM: davinci: dm644x: add support for v4l2 video display
ARM: EXYNOS: Hook up JPEG PD to generic PD infrastructure
ARM: EXYNOS: Hook up G2D PD to generic PD infrastructure
arm: lpc32xx: phy3250: add rtc & touch device
ARM: LPC32xx: clock.c: Clock registration fixes
ARM: LPC32xx: clock.c: jiffies wrapping
ARM: LPC32xx: clock.c: Missing header file
ARM: LPC32XX: Remove broken non-static declaration
ARM: LPC32xx: clock.c: Fix mutex lock issues
ARM: LPC32xx: clock.c: warning fix
ARM: LPC32xx: Added lpc32xx_defconfig
|
|
Disintegrate asm/system.h for ARM.
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Russell King <linux@arm.linux.org.uk>
cc: linux-arm-kernel@lists.infradead.org
|
|
fixes-non-critical has already been merged upstream, and there are a
handful of annoying context conflicts that it makes sense to resolve
before sending up. Part of this is because there was parallel development
going on between more urgent fixes and general driver fixups, it should
settle down once the lpc32xx platform reaches a more steady state.
Conflicts:
arch/arm/mach-lpc32xx/clock.c
arch/arm/mach-lpc32xx/common.h
Signed-off-by: Olof Johansson <olof@lixom.net>
|
|
Pull "ARM: global cleanups" from Arnd Bergmann:
"Quite a bit of code gets removed, and some stuff moved around, mostly
the old samsung s3c24xx stuff. There should be no functional changes
in this series otherwise. Some cleanups have dependencies on other
arm-soc branches and will be sent in the second round.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>"
Fixed up trivial conflicts mainly due to #include's being changes on
both sides.
* tag 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (121 commits)
ep93xx: Remove unnecessary includes of ep93xx-regs.h
ep93xx: Move EP93XX_SYSCON defines to SoC private header
ep93xx: Move crunch code to mach-ep93xx directory
ep93xx: Make syscon access functions private to SoC
ep93xx: Configure GPIO ports in core code
ep93xx: Move peripheral defines to local SoC header
ep93xx: Convert the watchdog driver into a platform device.
ep93xx: Use ioremap for backlight driver
ep93xx: Move GPIO defines to gpio-ep93xx.h
ep93xx: Don't use system controller defines in audio drivers
ep93xx: Move PHYS_BASE defines to local SoC header file
ARM: EXYNOS: Add clock register addresses for EXYNOS4X12 bus devfreq driver
ARM: EXYNOS: add clock registers for exynos4x12-cpufreq
PM / devfreq: update the name of EXYNOS clock registers that were omitted
PM / devfreq: update the name of EXYNOS clock register
ARM: EXYNOS: change the prefix S5P_ to EXYNOS4_ for clock
ARM: EXYNOS: use static declaration on regarding clock
ARM: EXYNOS: replace clock.c for other new EXYNOS SoCs
ARM: OMAP2+: Fix build error after merge
ARM: S3C24XX: remove call to s3c24xx_setup_clocks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull "ARM: Non-critical bug fixes" from Ardn Bergmann:
"Simple bug fixes that were not considered important enough for
inclusion into 3.3. One bug fix was originally intended for 3.3 but
accidentally got missed, but is not marked stable because it should
only get backported once later fixes also make it into v3.4.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>"
* tag 'fixes-non-critical' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (66 commits)
iomux-mx25.h slew rate adjusted for LCD __LD pins
ARM: davinci: DA850: move da850_register_pm to .init.text
ARM: davinci: cpufreq: fix compiler warning
ARM: OMAP2+: Fix build for omap4 only builds with missing include of linux/bug.h
ARM: OMAP2+: Fix section warnings for hsmmc_init_one
ARM: OMAP2+: Fix build issues with missing include of linux/bug.h
ARM: OMAP2+: gpmc-smsc911x: only register regulator for first instance
ARM: OMAP3+: PM: VP: fix integer truncation error
ARM: OMAP2+: PM: fix wakeupgen warning when hotplug disabled
ARM: OMAP2+: PM: fix section mismatch with omap2_init_processor_devices()
ARM: OMAP2: Fix section warning for n8x0 when CONFIG_MMC_OMAP is not set
ARM: OMAP2+: Fix omap24xx_io_desc warning if SoC subtypes are not selected
ARM: OMAP1: Fix section mismatch for omap1_init_early()
ARM: OMAP1: Fix typo in lcd_dma.c
ARM: OMAP: mailbox: trivial whitespace fix
ARM: OMAP: Remove definition cpu_is_omap4430()
ARM: OMAP2+: included some headers twice
ARM: OMAP: clock.c: included linux/debugfs.h twice
ARM: OMAP: don't build hwspinlock in vain
ARM: OMAP2+: ads7846_init: put gpio_pendown into pdata if it's provided
...
|
|
The recent cpuidle consolidation changes erroneously omitted one
critical line of code.
Signed-off-by: Robert Lee <rob.lee@linaro.org>
Tested-by: Sekhar Nori <nsekhar@ti.com>
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Enable core cpuidle timekeeping and irq enabling and remove that
handling from this code.
Signed-off-by: Robert Lee <rob.lee@linaro.org>
Reviewed-by: Kevin Hilman <khilman@ti.com>
Reviewed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
git://gitorious.org/linux-davinci/linux-davinci into next/drivers
* 'v3.4/features' of git://gitorious.org/linux-davinci/linux-davinci:
ARM: davinci: dm644x evm: add support for VPBE display
ARM: davinci: dm644x: add support for v4l2 video display
* included from the davinci/cleanup branch:
ARM: davinci: dm644x: don't force vpfe registeration on all boards
ARM: davinci: dm644x: fix inconsistent variable naming
ARM: davinci: dm644x: improve readability using macro
ARM: davinci: streamline sysmod access
ARM: davinci: create new common platform header for davinci
ARM: davinci: dm646x: move private definitions to C file
ARM: davinci: dm365: move private definitions to C file
ARM: davinci: dm644x: move private definitions to C file
Conflicts:
arch/arm/mach-davinci/board-dm644x-evm.c
arch/arm/mach-davinci/board-neuros-osd2.c
arch/arm/mach-davinci/board-sffsdr.c
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
next/fixes-non-critical
* 'fixes' of git://gitorious.org/linux-davinci/linux-davinci: (2 commits)
ARM: davinci: DA850: move da850_register_pm to .init.text
ARM: davinci: cpufreq: fix compiler warning
(update to v3.3-rc7)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Several platforms create IOMEM defines for casting to 'void __iomem *',
and other platforms are incorrectly using __io() macro for the same
purpose. This creates a common definition and removes all the platform
specific versions. Rather than try to make linux/io.h and asm/io.h
assembly safe, the assembly version of IOMEM is moved into
asm/assembler.h.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ryan Mallon <rmallon@gmail.com>
Cc: Eric Miao <eric.y.miao@gmail.com>
Cc: Haojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: David Brown <davidb@codeaurora.org>
Cc: Daniel Walker <dwalker@fifo99.com>
Cc: Bryan Huntsman <bryanh@codeaurora.org>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Paul Walmsley <paul@pwsan.com>
Acked-by: Viresh Kumar <viresh.kumar@st.com>
Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Cc: Colin Cross <ccross@android.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
|
|
All callers (board-mityomapl138.c and board-da850-evm.c) use it in
__init functions only.
This fixes:
WARNING: vmlinux.o(.text+0xd664): Section mismatch in reference from the function da850_register_pm() to the function .init.text:da8xx_get_mem_ctlr()
The function da850_register_pm() references
the function __init da8xx_get_mem_ctlr().
This is often because da850_register_pm lacks a __init
annotation or the annotation of da8xx_get_mem_ctlr is wrong.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
This fixes:
arch/arm/mach-davinci/cpufreq.c: In function davinci_target:
arch/arm/mach-davinci/cpufreq.c:98: warning: passing argument 2 of dev_printk from incompatible pointer type
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
This patch adds support for V4L2 video display to DM6446 EVM.
Support for SD and ED modes is provided, along with composite
and component outputs.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Add functions to register various video devices like venc, osd,
vpbe and the v4l2 display driver for dm644x.
Change dm644x_init_video() to make room for display related
configuration. Register the vpfe or vpbe devices only if valid
display configuration is provided to make sure boards without
video support dont erroneously register video devices.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Now that many platforms don't need mach/io.h, remove the unused ones.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Pawel Moll <pawel.moll@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
|
|
entry-macro.S doesn't actually need mach/io.h, so remove it.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/cleanup
* 'cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Fix L4_EMU_34XX_BASE error after iomap changes
ARM: OMAP2+: Limit omap_read/write usage to legacy USB drivers
ARM: OMAP: Remove plat/io.h by splitting it into mach/io.h and mach/hardware.h
ARM: OMAP2+: Move most of plat/io.h into local iomap.h
ARM: OMAP1: Move most of plat/io.h into local iomap.h
ARM: OMAP1: Move 16xx GPIO system clock to platform init code
ARM: OMAP: Move omap_init_consistent_dma_size() to local common.h
ARM: OMAP2+: Move SDRC related functions from io.h into local common.h
ARM: OMAP2+: Drop DISPC L3 firewall code
ARM: OMAP2xxx: PM: remove obsolete timer disable code in the suspend path
ARM: OMAP: McSPI: Remove unused flag from struct omap2_mcspi_device_config
(update to latest rmk/for-arm-soc branch)
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
* davinci/cleanups:
ARM: davinci: add back dummy header files
ARM: davinci: dm644x: don't force vpfe registeration on all boards
ARM: davinci: dm644x: fix inconsistent variable naming
ARM: davinci: dm644x: improve readability using macro
ARM: davinci: streamline sysmod access
ARM: davinci: create new common platform header for davinci
ARM: davinci: dm646x: move private definitions to C file
ARM: davinci: dm365: move private definitions to C file
ARM: davinci: dm644x: move private definitions to C file
Conflicts:
arch/arm/mach-davinci/board-dm644x-evm.c
arch/arm/mach-davinci/board-neuros-osd2.c
arch/arm/mach-davinci/board-sffsdr.c
|
|
The mach/dm365.h and mach/dm646xh headers are currently being included
in some device drivers. The removal of those includes is already merged
in some subsystem trees, but adding the dummy files ensures that this
branch can be built standalone.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
into next/fixes-non-critical
* 'v3.4/fixes' of git://gitorious.org/linux-davinci/linux-davinci:
ARM: davinci: map default_queue to edma channels
|
|
into next/cleanup
* 'imx-cleanup' of git://git.pengutronix.de/git/imx/linux-2.6: (247 commits)
ARM: Remove redundant ';' from avic_irq_set_priority()
ARM: mx3: Let mx31 and mx35 share the same CCM header file
ARM: plat-mxc: audmux-v1: Remove unneeded ifdef's
Update to v3.3-rc3
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Move all vpfe platform device registrations to the board specific
file.
This removes registration of vpfe platform devices on boards which
do not use vpfe.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Add dm644x_ prefix to names of v4l2 variables in dm644x.c
Add dm644xevm_ prefix to names of v4l2 variables in board-dm644x-evm.c.
This makes the code consistent with rest of these files.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Replace the VPSS base address "magic number" with the
define "DM644X_VPSS_BASE" to improve readability.
While at it, fix the indentation done using spaces in
this part of code.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
There are instances of IO_ADDRESS() being used for system module
(sysmod) register access. Eliminate this in favor of a ioremap()
based access. ioremap() the entire sysmod address space once during
boot-up and provide a helper macro to access specific register
offsets within the address space.
With this, also eliminate ioremap() of specific sysmodule registers
related to VPIF happening in DM646x EVM code.
While at it, also eliminate some duplicate sysmod register offset macros
defined in code and place offset definitions at one place in davinci.h
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
[nsekhar@ti.com: removed the addition of ifndef __ASSEMBLER__
in davinci.h, eliminate IO_ADDRESS() usage left out in dm646x.c,
cleanup VPIF sysmodule register access as part of this patch and
keep all sysmod offsets in davinci.h Also, convert the WARN_ON()
on failure to setup sysmod base to BUG_ON()]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Remove individual platform header files for dm365, dm355, dm644x
and dm646x and consolidate it into a single and common
header file davinci.h placed in arch/arm/mach-davinci.
This reduces the pollution in the include/mach and is consistent
with Russell's suggestions as part of his "pet peaves" mail.
(See #4 in: http://lists.infradead.org/pipermail/linux-arm-kernel/2011-November/071516.html)
While at it, fix the forward declaration of spi_board_info,
and include the right header file instead.
The further patches in the series take advantage of this consolidation
for easy implementation of IO_ADDRESS elimination.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
[nsekhar@ti.com: make davinci.h the first local include file,
fix forward declaration of spi_board_info and add back Deep Root
Systems, LLC copyright]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
into for-armsoc
|
|
* lpc32xx/drivers: (566 commits)
ARM: LPC32xx: ADC support for mach-lpc32xx
Includes an update to Linux 3.3-rc4
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Now that most platforms don't need disable_fiq and arch_ret_to_user
macros, we can remove the empty macros or empty entry-macro.S files.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Ryan Mallon <rmallon@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: Shawn Guo <shawn.guo@linaro.org>
|
|
Davinci has its own sched_clock() implementation, which gets in the
way of a single zImage. Moving to the common sched_clock framework
makes the code slightly cleaner.
Acked-by: Sekhar Nori <nsekhar@ti.com>
Cc: Kevin Hilman <khilman@ti.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Rearrange header files to keep related header files
together.
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
Default queue is expected to be a low-priority queue.
This way, long transfers on the default queue started
by the codec engine will not cause audio defects.
Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Juha Kuikka <juha.kuikka@gmail.com>
Reported-by: Juha Kuikka <juha.kuikka@gmail.com>
Acked-by: Rajashekhara, Sudhakar <sudhakar.raj@ti.com>
Cc: linux-mmc@vger.kernel.org
Cc: davinci-linux-open-source@linux.davincidsp.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: Rajashekhara, Sudhakar <sudhakar.raj@ti.com>
Cc: Ido Yariv <ido@wizery.com>
Cc: Sekhar Nori <nsekhar@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Sergei Shtylyov <sshtylyov@mvista.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Commit 5a05a8200a4359ef2bfe9094c137dee35cfdd516 ("davinci_emac:
use an unique MDIO bus name") introduced during the v3.3 merge
window updated the davinci mdio bus name to make it unique.
Update the bus name in board files which use DaVinci MDIO bus
to match the new name. Without this PHY is not detected with
error like:
PHY 0:01 not found
net eth0: could not connect to phy 0:01
Tested on DM365 and DA850 EVMs.
Cc: Florian Fainelli <florian@openwrt.org>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
When this is the only content remaining in mach/system.h then the
whole file is removed.
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Acked-and-tested-by: Jamie Iles <jamie@jamieiles.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Acked-by: David Brown <davidb@codeaurora.org>
Acked-by: Stephen Warren <swarren@nvidia.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
|
|
Move register base addresses and offsets used only in dm646x.c
from arch/arm/mach-davinci/include/mach/dm646x.h in to the C
file as these definitions are used only in C file.
This helps reduce code in arch/arm/mach-davinci/include/mach/
which is not really needed by rest of the kernel.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Move register base addresses and offsets used only in dm365.c
from arch/arm/mach-davinci/include/mach/dm365.h in to the C
file as these definitions are used only in C file.
This helps reduce code in arch/arm/mach-davinci/include/mach/
which is not really needed by rest of the kernel.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
|
Move register base addresses and offsets used only by dm644x.c
from arch/arm/mach-davinci/include/mach/dm644x.h to the C file
as these definitions are used only there.
This helps reduce code in arch/arm/mach-davinci/include/mach
which is not really needed by rest of the kernel.
Signed-off-by: Manjunath Hadli <manjunath.hadli@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
|
Linus Torvalds
Akinobu Mita
Sebastian Andrzej Siewior
Uwe Kleine-König
Shawn Guo
Murali Karicheri
David Howells
Olof Johansson
Robert Lee
Arnd Bergmann
Rob Herring
Manjunath Hadli
Russell King
Marc Zyngier
Sekhar Nori
Heiko Schocher
Nicolas Pitre