summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2009-09-04dm log: remove incorrect field from userspace table outputJonathan Brassow
The output of 'dmsetup table' includes an internal field that should not be there. This patch removes it. To make the fix simpler, we first reorder a constructor argument The 'device size' argument is generated internally. Currently it is placed as the last space-separated word of the constructor string. However, we need to use a version of the string without this word, so we move it to the beginning instead so it is trivial to skip past it. We keep a copy of the arguments passed to userspace for creating a log, just in case we need to resend them. These are the same arguments that are desired in the STATUSTYPE_TABLE request, except for one. When creating the userspace log, the userspace daemon must know the size of the mirror, so that is added to the arguments given in the constructor table. We were printing this extra argument out as well, which is a mistake. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-04dm log: fix userspace status outputJonathan Brassow
Fix 'dmsetup table' output. There is a missing ' ' at the end of the string causing two words to run together. Signed-off-by: Jonathan Brassow <jbrassow@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-04dm stripe: expose correct io hintsMike Snitzer
Set sensible I/O hints for striped DM devices in the topology infrastructure added for 2.6.31 for userspace tools to obtain via sysfs. Add .io_hints to 'struct target_type' to allow the I/O hints portion (io_min and io_opt) of the 'struct queue_limits' to be set by each target and implement this for dm-stripe. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-04dm table: add more context to terse warning messagesMike Snitzer
A couple of recent warning messages make it difficult for the reader to determine exactly what is wrong. This patch adds more information to those messages. The messages were added by these commits: 5dea271b6d87bd1d79a59c1d5baac2596a841c37 ("dm table: pass correct dev area size to device_area_is_valid") ea9df47cc92573b159ef3b4fda516c32cba9c4fd ("dm table: fix blk_stack_limits arg to use bytes not sectors") The patch also corrects references to logical_block_size in printk format strings from %hu to %u. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-04dm table: fix queue_limit checking device iteratorMikulas Patocka
The logic to check for valid device areas is inverted relative to proper use with iterate_devices. The iterate_devices method calls its callback for every underlying device in the target. If any callback returns non-zero, iterate_devices exits immediately. But the callback device_area_is_valid() returns 0 on error and 1 on success. The overall effect without is that an error is issued only if every device is invalid. This patch renames device_area_is_valid to device_area_is_invalid and inverts the logic so that one invalid device is sufficient to raise an error. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-04dm snapshot: implement iterate devicesMike Snitzer
Implement the .iterate_devices for the origin and snapshot targets. dm-snapshot's lack of .iterate_devices resulted in the inability to properly establish queue_limits for both targets. With 4K sector drives: an unfortunate side-effect of not establishing proper limits in either targets' DM device was that IO to the devices would fail even though both had been created without error. Commit af4874e03ed82f050d5872d8c39ce64bf16b5c38 ("dm target:s introduce iterate devices fn") in 2.6.31-rc1 should have implemented .iterate_devices for dm-snap.c's origin and snapshot targets. Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-04dm multipath: fix oops when request based io fails when no pathsKiyoshi Ueda
The patch posted at http://marc.info/?l=dm-devel&m=124539787228784&w=2 which was merged into cec47e3d4a861e1d942b3a580d0bbef2700d2bb2 ("dm: prepare for request based option") introduced a regression in request-based dm. If map_request() calls dm_kill_unmapped_request() to complete a cloned bio without dispatching it, clone->bio is still set when dm_end_request() is called and the BUG_ON(clone->bio) is incorrect. The patch fixes this bug by freeing bio in dm_end_request() if the clone has bio. I've redone my tests to cover all I/O paths and confirmed there's no other regression. Here is the oops I hit in request-based dm when I do I/O to a multipath device which doesn't have any active path nor queue_if_no_path setting: ------------[ cut here ]------------ kernel BUG at /root/2.6.31-rc4.rqdm/drivers/md/dm.c:828! invalid opcode: 0000 [#1] SMP last sysfs file: /sys/devices/system/cpu/cpu3/cache/index2/shared_cpu_map CPU 1 Modules linked in: autofs4 sunrpc cpufreq_ondemand acpi_cpufreq dm_mirror dm_region_hash dm_log dm_service_time dm_multipath scsi_dh dm_mod video output sbs sbshc battery ac sg sr_mod e1000e button cdrom serio_raw rtc_cmos rtc_core rtc_lib piix lpfc scsi_transport_fc ata_piix libata megaraid_sas sd_mod scsi_mod crc_t10dif ext3 jbd uhci_hcd ohci_hcd ehci_hcd [last unloaded: microcode] Pid: 7, comm: ksoftirqd/1 Not tainted 2.6.31-rc4.rqdm #1 Express5800/120Lj [N8100-1417] RIP: 0010:[<ffffffffa023629d>] [<ffffffffa023629d>] dm_softirq_done+0xbd/0x100 [dm_mod] RSP: 0018:ffff8800280a1f08 EFLAGS: 00010282 RAX: ffffffffa02544e0 RBX: ffff8802aa1111d0 RCX: ffff8802aa1111e0 RDX: ffff8802ab913e70 RSI: 0000000000000000 RDI: ffff8802ab913e70 RBP: ffff8800280a1f28 R08: ffffc90005457040 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: 00000000fffffffb R13: ffff8802ab913e88 R14: ffff8802ab9c1438 R15: 0000000000000100 FS: 0000000000000000(0000) GS:ffff88002809e000(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000003d54a98640 CR3: 000000029f0a1000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process ksoftirqd/1 (pid: 7, threadinfo ffff8802ae50e000, task ffff8802ae4f8040) Stack: ffff8800280a1f38 0000000000000020 ffffffff814f30a0 0000000000000004 <0> ffff8800280a1f58 ffffffff8116b245 ffff8800280a1f38 ffff8800280a1f38 <0> ffff8800280a1f58 0000000000000001 ffff8800280a1fa8 ffffffff810477bc Call Trace: <IRQ> [<ffffffff8116b245>] blk_done_softirq+0x75/0x90 [<ffffffff810477bc>] __do_softirq+0xcc/0x210 [<ffffffff81047170>] ? ksoftirqd+0x0/0x110 [<ffffffff8100ce7c>] call_softirq+0x1c/0x50 <EOI> [<ffffffff8100e785>] do_softirq+0x65/0xa0 [<ffffffff81047170>] ? ksoftirqd+0x0/0x110 [<ffffffff810471e0>] ksoftirqd+0x70/0x110 [<ffffffff81059559>] kthread+0x99/0xb0 [<ffffffff8100cd7a>] child_rip+0xa/0x20 [<ffffffff8100c73c>] ? restore_args+0x0/0x30 [<ffffffff810594c0>] ? kthread+0x0/0xb0 [<ffffffff8100cd70>] ? child_rip+0x0/0x20 Code: 44 89 e6 48 89 df e8 23 fb f2 e0 be 01 00 00 00 4c 89 f7 e8 f6 fd ff ff 5b 41 5c 41 5d 41 5e c9 c3 4c 89 ef e8 85 fe ff ff eb ed <0f> 0b eb fe 41 8b 85 dc 00 00 00 48 83 bb 10 01 00 00 00 89 83 RIP [<ffffffffa023629d>] dm_softirq_done+0xbd/0x100 [dm_mod] RSP <ffff8800280a1f08> ---[ end trace 16af0a1d8542da55 ]--- Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Alasdair G Kergon <agk@redhat.com>
2009-09-04sparc64: Fix bootup with mcount in some configs.David S. Miller
Functions invoked early when booting up a cpu can't use tracing because mcount requires a valid 'current_thread_info()' and TLB mappings to be setup. The code path of sun4v_register_mondo_queues --> register_one_mondo is one such case. sun4v_register_mondo_queues already has the necessary 'notrace' annotation, but register_one_mondo does not. Normally register_one_mondo is inlined so the bug doesn't trigger, but with some config/compiler combinations, it won't be so we must properly mark it notrace. While we're here, add 'notrace' annoations to prom_printf and prom_halt so that early error handling won't have the same problem. Reported-by: Alexander Beregalov <a.beregalov@gmail.com> Reported-by: Leif Sawyer <lsawyer@gci.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-03Input: atkbd - add Compaq Presario R4000-series repeat quirkDave Andrews
Compaq Presario R4000-series laptops are not sending a "volume up button release" and "volume down button release" signal in the PS/2 protocol for atkbd. The URL below has some of confirmed reports: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/385477 Signed-off-by: Dave Andrews <jetdog330@hotmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2009-09-03slub: Fix kmem_cache_destroy() with SLAB_DESTROY_BY_RCUEric Dumazet
kmem_cache_destroy() should call rcu_barrier() *after* kmem_cache_close() and *before* sysfs_slab_remove() or risk rcu_free_slab() being called after kmem_cache is deleted (kfreed). rmmod nf_conntrack can crash the machine because it has to kmem_cache_destroy() a SLAB_DESTROY_BY_RCU enabled cache. Cc: <stable@kernel.org> Reported-by: Zdenek Kabelac <zdenek.kabelac@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
2009-09-03JFFS2: add missing verify buffer allocation/deallocationMassimo Cirillo
The function jffs2_nor_wbuf_flash_setup() doesn't allocate the verify buffer if CONFIG_JFFS2_FS_WBUF_VERIFY is defined, so causing a kernel panic when that macro is enabled and the verify function is called. Similarly the jffs2_nor_wbuf_flash_cleanup() must free the buffer if CONFIG_JFFS2_FS_WBUF_VERIFY is enabled. The following patch fixes the problem. The following patch applies to 2.6.30 kernel. Signed-off-by: Massimo Cirillo <maxcir@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Cc: stable@kernel.org
2009-09-03mtd: nftl: fix offset alignmentsDimitri Gorokhovik
Arithmetic conversion in the mask computation makes the upper word of the second argument passed down to mtd->read_oob(), be always 0 (assuming 'offs' being a 64-bit signed long long type, and 'mtd->writesize' being a 32-bit unsigned int type). This patch applies over the other one adding masking in nftl_write, "nftl: write support is broken". Signed-off-by: Dimitri Gorokhovik <dimitri.gorokhovik@free.fr> Cc: Tim Gardner <tim.gardner@canonical.com> Cc: Scott James Remnant <scott@canonical.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-03mtd: nftl: write support is brokenDimitri Gorokhovik
Write support is broken in NFTL. Fix it. Signed-off-by: <dimitri.gorokhovik@free.fr> Cc: Tim Gardner <tim.gardner@canonical.com> Cc: Scott James Remnant <scott@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-03mtd: m25p80: fix null pointer dereference bugAnton Vorontsov
This patch fixes the following oops, observed with MTD_PARTITIONS=n: m25p80 spi32766.0: m25p80 (1024 Kbytes) Unable to handle kernel paging request for data at address 0x00000008 Faulting instruction address: 0xc03a54b0 Oops: Kernel access of bad area, sig: 11 [#1] Modules linked in: NIP: c03a54b0 LR: c03a5494 CTR: c01e98b8 REGS: ef82bb60 TRAP: 0300 Not tainted (2.6.31-rc4-00167-g4733fd3) MSR: 00029000 <EE,ME,CE> CR: 24022022 XER: 20000000 DEAR: 00000008, ESR: 00000000 TASK = ef82c000[1] 'swapper' THREAD: ef82a000 GPR00: 00000000 ef82bc10 ef82c000 0000002e 00001eb8 ffffffff c01e9824 00000036 GPR08: c054ed40 c0542a08 00001eb8 00004000 22022022 1001a1a0 3ff8fd00 00000000 GPR16: 00000000 00000001 00000000 00000000 ef82bddc c0530000 efbef500 ef8356d0 GPR24: 00000000 ef8356d0 00000000 efbf7a00 c0530ec4 ffffffed efbf5300 c0541f98 NIP [c03a54b0] m25p_probe+0x22c/0x354 LR [c03a5494] m25p_probe+0x210/0x354 Call Trace: [ef82bc10] [c03a5494] m25p_probe+0x210/0x354 (unreliable) [ef82bca0] [c024e37c] spi_drv_probe+0x2c/0x3c [ef82bcb0] [c01f1afc] driver_probe_device+0xa4/0x178 [ef82bcd0] [c01f06e8] bus_for_each_drv+0x6c/0xa8 [ef82bd00] [c01f1a34] device_attach+0x84/0xa8 ... Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-03sparc64: Kill spurious NMI watchdog triggers by increasing limit to 30 seconds.David S. Miller
This is a compromise and a temporary workaround for bootup NMI watchdog triggers some people see with qla2xxx devices present. This happens when, for example: CPU 0 is in the driver init and looping submitting mailbox commands to load the firmware, then waiting for completion. CPU 1 is receiving the device interrupts. CPU 1 is where the NMI watchdog triggers. CPU 0 is submitting mailbox commands fast enough that by the time CPU 1 returns from the device interrupt handler, a new one is pending. This sequence runs for more than 5 seconds. The problematic case is CPU 1's timer interrupt running when the barrage of device interrupts begin. Then we have: timer interrupt return for softirq checking pending, thus enable interrupts qla2xxx interrupt return qla2xxx interrupt return ... 5+ seconds pass final qla2xxx interrupt for fw load return run timer softirq return At some point in the multi-second qla2xxx interrupt storm we trigger the NMI watchdog on CPU 1 from the NMI interrupt handler. The timer softirq, once we get back to running it, is smart enough to run the timer work enough times to make up for the missed timer interrupts. However, the NMI watchdogs (both x86 and sparc) use the timer interrupt count to notice the cpu is wedged. But in the above scenerio we'll receive only one such timer interrupt even if we last all the way back to running the timer softirq. The default watchdog trigger point is only 5 seconds, which is pretty low (the softwatchdog triggers at 60 seconds). So increase it to 30 seconds for now. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-03perf_counter/powerpc: Fix cache event codes for POWER7Paul Mackerras
I had the codes for L1 D-cache load accesses and misses swapped around, and the wrong codes for LL-cache accesses and misses. This corrects them. Reported-by: Corey Ashford <cjashfor@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: <stable@kernel.org> LKML-Reference: <19103.8514.709300.585484@cargo.ozlabs.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-02tc: Fix unitialized kernel memory leakEric Dumazet
Three bytes of uninitialized kernel memory are currently leaked to user Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-03sound: oxygen: handle cards with missing EEPROMClemens Ladisch
The card model detection code introduced in 2.6.30 that tries to work around partially broken EEPROM contents by reading the EEPROM directly does not handle cards where the EEPROM has been omitted. In this case, we have to use the default ID to allow the driver to load. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Reported-and-tested-by: Ozan Çağlayan <ozan@pardus.org.tr> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-09-02agp/intel: support for new chip variant of IGDNG mobileZhenyu Wang
New variant of IGDNG mobile chip has new host bridge id. [anholt: Note that this new PCI ID doesn't impact the DRM, which doesn't care about the PCI ID of the bridge] Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-02drm/i915: Unref old_obj on get_fence_reg() error pathChris Wilson
Remember to release the local reference if we fail to wait on the rendering. (Also whilst in the vicinity add some whitespace so that the phasing of the operations is clearer.) Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-02drm/i915: increase default latency constant (v2 w/comment)Jesse Barnes
Some i915/i945 platforms have a fairly high memory latency in certain situations, so increase our constant a bit to avoid FIFO underruns. The effect should be positive on other platforms as well; we'll have a bit more insurance against a busy memory subsystem due to the extra FIFO entries. Fixes fdo bug #23368. Needed for 2.6.31. Tested-by: Sven Arvidsson <sa@whiz.se> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net>
2009-09-02[IA64] fix csum_ipv6_magic()Jiri Bohac
The 32-bit parameters (len and csum) of csum_ipv6_magic() are passed in 64-bit registers in2 and in4. The high order 32 bits of the registers were never cleared, and garbage was sometimes calculated into the checksum. Fix this by clearing the high order 32 bits of these registers. Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-09-02[IA64] Fix warning in dma-mapping.cLuck, Tony
arch/ia64/kernel/dma-mapping.c:14: warning: control reaches end of non-void function arch/ia64/kernel/dma-mapping.c:14: warning: no return statement in function returning non-void This warning was introduced by commit: 390bd132b2831a2ad0268e84bffbfc0680debfe5 Add dma_debug_init() for ia64 Signed-off-by: Tony Luck <tony.luck@intel.com>
2009-09-01pkt_sched: Revert tasklet_hrtimer changes.David S. Miller
These are full of unresolved problems, mainly that conversions don't work 1-1 from hrtimers to tasklet_hrtimers because unlike hrtimers tasklets can't be killed from softirq context. And when a qdisc gets reset, that's exactly what we need to do here. We'll work this out in the net-next-2.6 tree and if warranted we'll backport that work to -stable. This reverts the following 3 changesets: a2cb6a4dd470d7a64255a10b843b0d188416b78f ("pkt_sched: Fix bogon in tasklet_hrtimer changes.") 38acce2d7983632100a9ff3fd20295f6e34074a8 ("pkt_sched: Convert CBQ to tasklet_hrtimer.") ee5f9757ea17759e1ce5503bdae2b07e48e32af9 ("pkt_sched: Convert qdisc_watchdog to tasklet_hrtimer") Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01net: sk_free() should be allowed right after sk_alloc()Jarek Poplawski
After commit 2b85a34e911bf483c27cfdd124aeb1605145dc80 (net: No more expensive sock_hold()/sock_put() on each tx) sk_free() frees socks conditionally and depends on sk_wmem_alloc being set e.g. in sock_init_data(). But in some cases sk_free() is called earlier, usually after other alloc errors. Fix is to move sk_wmem_alloc initialization from sock_init_data() to sk_alloc() itself. Signed-off-by: Jarek Poplawski <jarkao2@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01xfs: actually enable the swapext compat handlerChristoph Hellwig
Fix a small typo in the compat ioctl handler that cause the swapext compat handler to never be called. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Torsten Kaiser <just.for.lkml@googlemail.com> Tested-by: Torsten Kaiser <just.for.lkml@googlemail.com> Reviewed-by: Eric Sandeen <sandeen@sandeen.net> Reviewed-by: Felix Blyakher <felixb@sgi.com> Signed-off-by: Felix Blyakher <felixb@sgi.com>
2009-09-01block: Allow changing max_sectors_kb above the default 512Nikanth Karthikesan
The patch "block: Use accessor functions for queue limits" (ae03bf639a5027d27270123f5f6e3ee6a412781d) changed queue_max_sectors_store() to use blk_queue_max_sectors() instead of directly assigning the value. But blk_queue_max_sectors() differs a bit 1. It sets both max_sectors_kb, and max_hw_sectors_kb 2. Never allows one to change max_sectors_kb above BLK_DEF_MAX_SECTORS. If one specifies a value greater then max_hw_sectors is set to that value but max_sectors is set to BLK_DEF_MAX_SECTORS I am not sure whether blk_queue_max_sectors() should be changed, as it seems to be that way for a long time. And there may be callers dependent on that behaviour. This patch simply reverts to the older way of directly assigning the value to max_sectors as it was before. Signed-off-by: Nikanth Karthikesan <knikanth@suse.de> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-01[CPUFREQ] Re-enable cpufreq suspend and resume codeDominik Brodowski
Commit 4bc5d3413503 is broken and causes regressions: (1) cpufreq_driver->resume() and ->suspend() were only called on __powerpc__, but you could set them on all architectures. In fact, ->resume() was defined and used before the PPC-related commit 42d4dc3f4e1e complained about in 4bc5d3413503. (2) Therfore, the resume functions in acpi_cpufreq and speedstep-smi would never be called. (3) This means speedstep-smi would be unusuable after suspend or resume. The _real_ problem was calling cpufreq_driver->get() with interrupts off, but it re-enabling interrupts on some platforms. Why is ->get() necessary? Some systems like to change the CPU frequency behind our back, especially during BIOS-intensive operations like suspend or resume. If such systems also use a CPU frequency-dependant timing loop, delays might be off by large factors. Therefore, we need to ascertain as soon as possible that the CPU frequency is indeed at the speed we think it is. You can do this two ways: either setting it anew, or trying to get it. The latter is what was done, the former also has the same IRQ issue. So, let's try something different: defer the checking to after interrupts are re-enabled, by calling cpufreq_update_policy() (via schedule_work()). Timings may be off until this later stage, so let's watch out for resume regressions caused by the deferred handling of frequency changes behind the kernel's back. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Dave Jones <davej@redhat.com>
2009-09-01percpu: don't assume existence of cpu0Tejun Heo
percpu incorrectly assumed that cpu0 was always there which led to the following warning and eventual oops on sparc machines w/o cpu0. WARNING: at mm/percpu.c:651 pcpu_map+0xdc/0x100() Modules linked in: Call Trace: [000000000045eb70] warn_slowpath_common+0x50/0xa0 [000000000045ebdc] warn_slowpath_null+0x1c/0x40 [00000000004d493c] pcpu_map+0xdc/0x100 [00000000004d59a4] pcpu_alloc+0x3e4/0x4e0 [00000000004d5af8] __alloc_percpu+0x18/0x40 [00000000005b112c] __percpu_counter_init+0x4c/0xc0 ... Unable to handle kernel NULL pointer dereference ... I7: <sysfs_new_dirent+0x30/0x120> Disabling lock debugging due to kernel taint Caller[000000000053c1b0]: sysfs_new_dirent+0x30/0x120 Caller[000000000053c7a4]: create_dir+0x24/0xc0 Caller[000000000053c870]: sysfs_create_dir+0x30/0x80 Caller[00000000005990e8]: kobject_add_internal+0xc8/0x200 ... Kernel panic - not syncing: Attempted to kill the idle task! This patch fixes the problem by backporting parts from devel branch to make percpu core not depend on the existence of cpu0. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Meelis Roos <mroos@linux.ee> Cc: David Miller <davem@davemloft.net>
2009-09-01sound: oxygen: fix MCLK rate for 192 kHz playbackClemens Ladisch
Do not forget to program the MCLK ratio for the I2S output. Otherwise, the master clock frequency can be too high for the DACs at sample frequencies above 96 kHz. Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: <stable@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-31autofs4 - fix missed case when changing to use struct pathIan Kent
In the recent change by Al Viro that changes verious subsystems to use "struct path" one case was missed in the autofs4 module which causes mounts to no longer expire. Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-31Merge branch 'fix/hda' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6 * 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6: ALSA: hda - Fix MacBookPro 3,1/4,1 quirk with ALC889A ALSA: hda - Add missing mux check for VT1708
2009-08-31Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB (12564a): MAINTAINERS: Update gspca sn9c20x name style V4L/DVB (12502): gspca - sn9c20x: Fix gscpa sn9c20x build errors. V4L/DVB (12495): em28xx: Don't call em28xx_ir_init when disable_ir is true V4L/DVB (12457): zr364: wrong indexes V4L/DVB (12451): Update KConfig File to enable SDIO and USB interfaces V4L/DVB (12450): Siano: Fixed SDIO compilation bugs V4L/DVB (12449): adds webcam for Micron device MT9M111 0x143A to em28xx V4L/DVB (12446): sms1xxx: restore GPIO functionality for all Hauppauge devices
2009-08-31lmb: Also remove __init from lmb_end_of_RAM() declaration in lmb.hBenjamin Herrenschmidt
My previous patch (commit 4f8ee2c9cc: "lmb: Remove __init from lmb_end_of_DRAM()") removed __init in lmb.c but missed the fact that it was also marked as such in the .h Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-31ata_piix: parallel scanning on PATA needs an extra lockingBartlomiej Zolnierkiewicz
Commit log for commit 517d3cc15b36392e518abab6bacbb72089658313 ("[libata] ata_piix: Enable parallel scan") says: This patch turns on parallel scanning for the ata_piix driver. This driver is used on most netbooks (no AHCI for cheap storage it seems). The scan is the dominating time factor in the kernel boot for these devices; with this flag it gets cut in half for the device I used for testing (eeepc). Alan took a look at the driver source and concluded that it ought to be safe to do for this driver. Alan has also checked with the hardware team. and it is all true but once we put all things together additional constraints for PATA controllers show up (some hardware registers have per-host not per-port atomicity) and we risk misprogramming the controller. I used the following test to check whether the issue is real: @@ -736,8 +736,20 @@ static void piix_set_piomode(struct ata_ (timings[pio][1] << 8); } pci_write_config_word(dev, master_port, master_data); - if (is_slave) + if (is_slave) { + if (ap->port_no == 0) { + u8 tmp = slave_data; + + while (slave_data == tmp) { + pci_read_config_byte(dev, slave_port, &tmp); + msleep(50); + } + + dev_printk(KERN_ERR, &dev->dev, "PATA parallel scan " + "race detected\n"); + } pci_write_config_byte(dev, slave_port, slave_data); + } /* Ensure the UDMA bit is off - it will be turned back on if UDMA is selected */ and it indeed triggered the error message. Lets fix all such races by adding an extra locking to ->set_piomode and ->set_dmamode methods for PATA controllers. [ Alan: would be better to take the host lock in libata-core for these cases so that we fix all the adapters in one swoop. "Looks fine as a temproary quickfix tho" ] Cc: Arjan van de Ven <arjan@linux.intel.com> Acked-by: Alan Cox <alan@linux.intel.com> Cc: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-08-31Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel: drm/i915: Improve CRTDDC mapping by using VBT info drm/i915: Fix CPU-spinning hangs related to fence usage by using an LRU. drm/i915: Set crtc/clone mask in different output devices drm/i915: Always use SDVO_B detect bit for SDVO output detection. drm/i915: Fix typo that broke SVID1 in intel_sdvo_multifunc_encoder() drm/i915: Check if BIOS enabled dual-channel LVDS on 8xx, not only on 9xx drm/i915: Set the multiplier for SDVO on G33 platform
2009-08-31ALSA: hda - Fix MacBookPro 3,1/4,1 quirk with ALC889ATakashi Iwai
This patch fixes the wrong headphone output routing for MacBookPro 3,1/4,1 quirk with ALC889A codec, which caused the silent headphone output. Also, this gives the individual Headphone and Speaker volume controls. Reference: kernel bug#14078 http://bugzilla.kernel.org/show_bug.cgi?id=14078 Signed-off-by: Takashi Iwai <tiwai@suse.de> Cc: <stable@kernel.org>
2009-08-31ALSA: hda - Add missing mux check for VT1708Takashi Iwai
In patch_vt1708(), the check of MUX nids is missing and this results in the -EINVAL error in accessing Input Source mixer element. Simpliy adding the call of get_mux_nids() fixes the problem. Reference: Novell bnc#534904 https://bugzilla.novell.com/show_bug.cgi?id=534904 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-08-31V4L/DVB (12564a): MAINTAINERS: Update gspca sn9c20x name styleJoe Perches
To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12502): gspca - sn9c20x: Fix gscpa sn9c20x build errors.Randy Dunlap
Reported-by: Toralf Forster <toralf.foerster@gmx.de> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12495): em28xx: Don't call em28xx_ir_init when disable_ir is trueShine Liu
We should call em28xx_ir_init(dev) only when disable_ir is true. Signed-off-by: Shine Liu <shinel@foxmail.com> Reviewed-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12457): zr364: wrong indexesRoel Kluin
The order of indexes is reversed Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Antoine Jacquet <royale@zerezo.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12451): Update KConfig File to enable SDIO and USB interfacesUdi Atar
Update KConfig file to enbale selection of SDIO and USB interfaces, and add dependancy on relevant modules. [mchehab@redhat.com: fix merge conflicts, remove default: m, add missing endmenu] Signed-off-by: Udi Atar <udia@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12450): Siano: Fixed SDIO compilation bugsUdi Atar
Fixed SDIO compilation bugs Also fixed a memory overrun issue in buffer management. Signed-off-by: Udi Atar <udia@siano-ms.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12449): adds webcam for Micron device MT9M111 0x143A to em28xxMauro Carvalho Chehab
[mchehab@redhat.com: fix merge conflict and a few CodingStyle issues] Signed-off-by: Steve Gotthardt <gotthardt@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-31V4L/DVB (12446): sms1xxx: restore GPIO functionality for all Hauppauge devicesMichael Krufky
Previous changesets broke Hauppauge devices and their GPIO configurations. This changeset restores the LED & LNA functionality. Signed-off-by: Michael Krufky <mkrufky@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-08-30gianfar: gfar_remove needs to call unregister_netdev()Toru UCHIYAMA
This patch solves the problem that the Oops(BUG_ON) occurs by rmmod. # rmmod gianfar_driver ------------[ cut here ]------------ Kernel BUG at c01fec48 [verbose debug info unavailable] Oops: Exception in kernel mode, sig: 5 [#1] MPC837x MDS Modules linked in: gianfar_driver(-) usb_storage scsi_wait_scan NIP: c01fec48 LR: c01febf4 CTR: c01feba8 REGS: dec5bd60 TRAP: 0700 Tainted: G W (2.6.31-rc2) MSR: 00029032 <EE,ME,CE,IR,DR> CR: 22000424 XER: 20000000 TASK = dec4cac0[1135] 'rmmod' THREAD: dec5a000 GPR00: 00000002 dec5be10 dec4cac0 dfba1820 c035d444 c035d478 ffffffff 00000000 GPR08: 0000002b 00000001 dfba193c 00000001 22000424 10019b34 1ffcb000 00000000 GPR16: 10012008 00000000 bf82ebe0 100017ec bf82ebec bf82ebe8 bf82ebd0 00000880 GPR24: 00000000 bf82ebf0 c03532f0 c03532e4 c036b594 dfba183c dfba1800 dfba1820 NIP [c01fec48] free_netdev+0xa0/0xb8 LR [c01febf4] free_netdev+0x4c/0xb8 Call Trace: [dec5be10] [c01febf4] free_netdev+0x4c/0xb8 (unreliable) [dec5be30] [e105f290] gfar_remove+0x50/0x68 [gianfar_driver] [dec5be40] [c01ec534] of_platform_device_remove+0x30/0x44 [dec5be50] [c0181760] __device_release_driver+0x68/0xc8 [dec5be60] [c0181868] driver_detach+0xa8/0xac [dec5be80] [c0180814] bus_remove_driver+0x9c/0xd8 [dec5bea0] [c0181efc] driver_unregister+0x60/0x98 [dec5beb0] [c01ec650] of_unregister_driver+0x14/0x24 [dec5bec0] [e10631bc] gfar_exit+0x18/0x4bc [gianfar_driver] [dec5bed0] [c0047584] sys_delete_module+0x16c/0x228 [dec5bf40] [c00116bc] ret_from_syscall+0x0/0x38 --- Exception: c01 at 0xff3669c LR = 0x10000f34 Instruction dump: 409e0024 a07e00c0 7c63f050 4be74429 80010024 bba10014 38210020 7c0803a6 4e800020 68000003 3160ffff 7d2b0110 <0f090000> 38000004 387e01f0 901e01d4 ---[ end trace 8c595bcd37230a0f ]--- localhost kernel: ------------[ cut here ]------------ Signed-off-by: Toru UCHIYAMA uchiyama.toru@jp.fujitsu.com Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-31nilfs2: fix preempt count underflow in nilfs_btnode_prepare_change_keyRyusuke Konishi
This will fix the following preempt count underflow reported from users with the title "[NILFS users] segctord problem" (Message-ID: <949415.6494.qm@web58808.mail.re1.yahoo.com> and Message-ID: <debc30fc0908270825v747c1734xa59126623cfd5b05@mail.gmail.com>): WARNING: at kernel/sched.c:4890 sub_preempt_count+0x95/0xa0() Hardware name: HP Compaq 6530b (KR980UT#ABC) Modules linked in: bridge stp llc bnep rfcomm l2cap xfs exportfs nilfs2 cowloop loop vboxnetadp vboxnetflt vboxdrv btusb bluetooth uvcvideo videodev v4l1_compat v4l2_compat_ioctl32 arc4 snd_hda_codec_analog ecb iwlagn iwlcore rfkill lib80211 mac80211 snd_hda_intel snd_hda_codec ehci_hcd uhci_hcd usbcore snd_hwdep snd_pcm tg3 cfg80211 psmouse snd_timer joydev libphy ohci1394 snd_page_alloc hp_accel lis3lv02d ieee1394 led_class i915 drm i2c_algo_bit video backlight output i2c_core dm_crypt dm_mod Pid: 4197, comm: segctord Not tainted 2.6.30-gentoo-r4-64 #7 Call Trace: [<ffffffff8023fa05>] ? sub_preempt_count+0x95/0xa0 [<ffffffff802470f8>] warn_slowpath_common+0x78/0xd0 [<ffffffff8024715f>] warn_slowpath_null+0xf/0x20 [<ffffffff8023fa05>] sub_preempt_count+0x95/0xa0 [<ffffffffa04ce4db>] nilfs_btnode_prepare_change_key+0x11b/0x190 [nilfs2] [<ffffffffa04d01ad>] nilfs_btree_assign_p+0x19d/0x1e0 [nilfs2] [<ffffffffa04d10ad>] nilfs_btree_assign+0xbd/0x130 [nilfs2] [<ffffffffa04cead7>] nilfs_bmap_assign+0x47/0x70 [nilfs2] [<ffffffffa04d9bc6>] nilfs_segctor_do_construct+0x956/0x20f0 [nilfs2] [<ffffffff805ac8e2>] ? _spin_unlock_irqrestore+0x12/0x40 [<ffffffff803c06e0>] ? __up_write+0xe0/0x150 [<ffffffff80262959>] ? up_write+0x9/0x10 [<ffffffffa04ce9f3>] ? nilfs_bmap_test_and_clear_dirty+0x43/0x60 [nilfs2] [<ffffffffa04cd627>] ? nilfs_mdt_fetch_dirty+0x27/0x60 [nilfs2] [<ffffffffa04db5fc>] nilfs_segctor_construct+0x8c/0xd0 [nilfs2] [<ffffffffa04dc3dc>] nilfs_segctor_thread+0x15c/0x3a0 [nilfs2] [<ffffffffa04dbe20>] ? nilfs_construction_timeout+0x0/0x10 [nilfs2] [<ffffffff80252633>] ? add_timer+0x13/0x20 [<ffffffff802370da>] ? __wake_up_common+0x5a/0x90 [<ffffffff8025e960>] ? autoremove_wake_function+0x0/0x40 [<ffffffffa04dc280>] ? nilfs_segctor_thread+0x0/0x3a0 [nilfs2] [<ffffffffa04dc280>] ? nilfs_segctor_thread+0x0/0x3a0 [nilfs2] [<ffffffff8025e556>] kthread+0x56/0x90 [<ffffffff8020cdea>] child_rip+0xa/0x20 [<ffffffff8025e500>] ? kthread+0x0/0x90 [<ffffffff8020cde0>] ? child_rip+0x0/0x20 This problem was caused due to a missing radix_tree_preload() call in the retry path of nilfs_btnode_prepare_change_key() function. Reported-by: Eric A <eric225125@yahoo.com> Reported-by: Jerome Poulin <jeromepoulin@gmail.com> Signed-off-by: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Tested-by: Jerome Poulin <jeromepoulin@gmail.com> Cc: stable@kernel.org
2009-08-30PCI SR-IOV: correct broken resource alignment calculationsChris Wright
An SR-IOV capable device includes an SR-IOV PCIe capability which describes the Virtual Function (VF) BAR requirements. A typical SR-IOV device can support multiple VFs whose BARs must be in a contiguous region, effectively an array of VF BARs. The BAR reports the size requirement for a single VF. We calculate the full range needed by simply multiplying the VF BAR size with the number of possible VFs and create a resource spanning the full range. This all seems sane enough except it artificially inflates the alignment requirement for the VF BAR. The VF BAR need only be aligned to the size of a single BAR not the contiguous range of VF BARs. This can cause us to fail to allocate resources for the BAR despite the fact that we actually have enough space. This patch adds a thin PCI specific layer over the generic resource_alignment() function which is aware of the special nature of VF BARs and does sorting and allocation based on the smaller alignment requirement. I recognize that while resource_alignment is generic, it's basically a PCI helper. An alternative to this patch is to add PCI VF BAR specific information to struct resource. I opted for the extra layer rather than adding such PCI specific information to struct resource. This does have the slight downside that we don't cache the BAR size and re-read for each alignment query (happens a small handful of times during boot for each VF BAR). Signed-off-by: Chris Wright <chrisw@sous-sol.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Matthew Wilcox <matthew@wil.cx> Cc: Yu Zhao <yu.zhao@intel.com> Cc: stable@kernel.org Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-08-29drm/i915: Improve CRTDDC mapping by using VBT infoDavid Müller (ELSOFT AG)
Use VBT information to determine which DDC bus to use for CRTDCC. Fall back to GPIOA if VBT info is not available. Signed-off-by: David Müller <d.mueller@elsoft.ch> Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Eric Anholt <eric@anholt.net> Tested on: 855 (David), and 945GM, 965GM, GM45, and G45 (anholt)
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-04-27 20:24:28 +0000