549 files changed, 5161 insertions, 4644 deletions

diff --git a/drivers/Makefile b/drivers/Makefile
index e3ced91b1784..d05d81b19b50 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -53,8 +53,8 @@ obj-y				+= gpu/
 obj-$(CONFIG_CONNECTOR)		+= connector/
 
 # i810fb and intelfb depend on char/agp/
-obj-$(CONFIG_FB_I810)           += video/i810/
-obj-$(CONFIG_FB_INTEL)          += video/intelfb/
+obj-$(CONFIG_FB_I810)           += video/fbdev/i810/
+obj-$(CONFIG_FB_INTEL)          += video/fbdev/intelfb/
 
 obj-$(CONFIG_PARPORT)		+= parport/
 obj-y				+= base/ block/ misc/ mfd/ nfc/
diff --git a/drivers/char/hw_random/bcm2835-rng.c b/drivers/char/hw_random/bcm2835-rng.c
index 8c3b255e629a..e900961cdd2e 100644
--- a/drivers/char/hw_random/bcm2835-rng.c
+++ b/drivers/char/hw_random/bcm2835-rng.c
@@ -61,18 +61,18 @@ static int bcm2835_rng_probe(struct platform_device *pdev)
 	}
 	bcm2835_rng_ops.priv = (unsigned long)rng_base;
 
+	/* set warm-up count & enable */
+	__raw_writel(RNG_WARMUP_COUNT, rng_base + RNG_STATUS);
+	__raw_writel(RNG_RBGEN, rng_base + RNG_CTRL);
+
 	/* register driver */
 	err = hwrng_register(&bcm2835_rng_ops);
 	if (err) {
 		dev_err(dev, "hwrng registration failed\n");
 		iounmap(rng_base);
-	} else {
+	} else
 		dev_info(dev, "hwrng registered\n");
 
-		/* set warm-up count & enable */
-		__raw_writel(RNG_WARMUP_COUNT, rng_base + RNG_STATUS);
-		__raw_writel(RNG_RBGEN, rng_base + RNG_CTRL);
-	}
 	return err;
 }
 
diff --git a/drivers/char/ipmi/Kconfig b/drivers/char/ipmi/Kconfig
index 0baa8fab4ea7..db1c9b7adaa6 100644
--- a/drivers/char/ipmi/Kconfig
+++ b/drivers/char/ipmi/Kconfig
@@ -50,6 +50,18 @@ config IPMI_SI
 	 Currently, only KCS and SMIC are supported.  If
 	 you are using IPMI, you should probably say "y" here.
 
+config IPMI_SI_PROBE_DEFAULTS
+       bool 'Probe for all possible IPMI system interfaces by default'
+       default n
+       depends on IPMI_SI
+       help
+	 Modern systems will usually expose IPMI interfaces via a discoverable
+	 firmware mechanism such as ACPI or DMI. Older systems do not, and so
+	 the driver is forced to probe hardware manually. This may cause boot
+	 delays. Say "n" here to disable this manual probing. IPMI will then
+	 only be available on older systems if the "ipmi_si_intf.trydefaults=1"
+	 boot argument is passed.
+
 config IPMI_WATCHDOG
        tristate 'IPMI Watchdog Timer'
        help
diff --git a/drivers/char/ipmi/ipmi_bt_sm.c b/drivers/char/ipmi/ipmi_bt_sm.c
index f5e4cd7617f6..61e71616689b 100644
--- a/drivers/char/ipmi/ipmi_bt_sm.c
+++ b/drivers/char/ipmi/ipmi_bt_sm.c
@@ -352,7 +352,7 @@ static inline void write_all_bytes(struct si_sm_data *bt)
 
 static inline int read_all_bytes(struct si_sm_data *bt)
 {
-	unsigned char i;
+	unsigned int i;
 
 	/*
 	 * length is "framing info", minimum = 4: NetFn, Seq, Cmd, cCode.
diff --git a/drivers/char/ipmi/ipmi_kcs_sm.c b/drivers/char/ipmi/ipmi_kcs_sm.c
index 6a4bdc18955a..8c25f596808a 100644
--- a/drivers/char/ipmi/ipmi_kcs_sm.c
+++ b/drivers/char/ipmi/ipmi_kcs_sm.c
@@ -251,8 +251,9 @@ static inline int check_obf(struct si_sm_data *kcs, unsigned char status,
 	if (!GET_STATUS_OBF(status)) {
 		kcs->obf_timeout -= time;
 		if (kcs->obf_timeout < 0) {
-		    start_error_recovery(kcs, "OBF not ready in time");
-		    return 1;
+			kcs->obf_timeout = OBF_RETRY_TIMEOUT;
+			start_error_recovery(kcs, "OBF not ready in time");
+			return 1;
 		}
 		return 0;
 	}
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index ec4e10fcf1a5..e6db9381b2c7 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -55,6 +55,7 @@ static struct ipmi_recv_msg *ipmi_alloc_recv_msg(void);
 static int ipmi_init_msghandler(void);
 static void smi_recv_tasklet(unsigned long);
 static void handle_new_recv_msgs(ipmi_smi_t intf);
+static void need_waiter(ipmi_smi_t intf);
 
 static int initialized;
 
@@ -73,14 +74,28 @@ static struct proc_dir_entry *proc_ipmi_root;
  */
 #define MAX_MSG_TIMEOUT		60000
 
+/* Call every ~1000 ms. */
+#define IPMI_TIMEOUT_TIME	1000
+
+/* How many jiffies does it take to get to the timeout time. */
+#define IPMI_TIMEOUT_JIFFIES	((IPMI_TIMEOUT_TIME * HZ) / 1000)
+
+/*
+ * Request events from the queue every second (this is the number of
+ * IPMI_TIMEOUT_TIMES between event requests).  Hopefully, in the
+ * future, IPMI will add a way to know immediately if an event is in
+ * the queue and this silliness can go away.
+ */
+#define IPMI_REQUEST_EV_TIME	(1000 / (IPMI_TIMEOUT_TIME))
+
 /*
  * The main "user" data structure.
  */
 struct ipmi_user {
 	struct list_head link;
 
-	/* Set to "0" when the user is destroyed. */
-	int valid;
+	/* Set to false when the user is destroyed. */
+	bool valid;
 
 	struct kref refcount;
 
@@ -92,7 +107,7 @@ struct ipmi_user {
 	ipmi_smi_t intf;
 
 	/* Does this interface receive IPMI events? */
-	int gets_events;
+	bool gets_events;
 };
 
 struct cmd_rcvr {
@@ -383,6 +398,9 @@ struct ipmi_smi {
 	unsigned int     waiting_events_count; /* How many events in queue? */
 	char             delivering_events;
 	char             event_msg_printed;
+	atomic_t         event_waiters;
+	unsigned int     ticks_to_req_ev;
+	int              last_needs_timer;
 
 	/*
 	 * The event receiver for my BMC, only really used at panic
@@ -395,7 +413,7 @@ struct ipmi_smi {
 
 	/* For handling of maintenance mode. */
 	int maintenance_mode;
-	int maintenance_mode_enable;
+	bool maintenance_mode_enable;
 	int auto_maintenance_timeout;
 	spinlock_t maintenance_mode_lock; /* Used in a timer... */
 
@@ -451,7 +469,6 @@ static DEFINE_MUTEX(ipmi_interfaces_mutex);
 static LIST_HEAD(smi_watchers);
 static DEFINE_MUTEX(smi_watchers_mutex);
 
-
 #define ipmi_inc_stat(intf, stat) \
 	atomic_inc(&(intf)->stats[IPMI_STAT_ ## stat])
 #define ipmi_get_stat(intf, stat) \
@@ -772,6 +789,7 @@ static int intf_next_seq(ipmi_smi_t           intf,
 		*seq = i;
 		*seqid = intf->seq_table[i].seqid;
 		intf->curr_seq = (i+1)%IPMI_IPMB_NUM_SEQ;
+		need_waiter(intf);
 	} else {
 		rv = -EAGAIN;
 	}
@@ -941,7 +959,7 @@ int ipmi_create_user(unsigned int          if_num,
 	new_user->handler = handler;
 	new_user->handler_data = handler_data;
 	new_user->intf = intf;
-	new_user->gets_events = 0;
+	new_user->gets_events = false;
 
 	if (!try_module_get(intf->handlers->owner)) {
 		rv = -ENODEV;
@@ -962,10 +980,15 @@ int ipmi_create_user(unsigned int          if_num,
 	 */
 	mutex_unlock(&ipmi_interfaces_mutex);
 
-	new_user->valid = 1;
+	new_user->valid = true;
 	spin_lock_irqsave(&intf->seq_lock, flags);
 	list_add_rcu(&new_user->link, &intf->users);
 	spin_unlock_irqrestore(&intf->seq_lock, flags);
+	if (handler->ipmi_watchdog_pretimeout) {
+		/* User wants pretimeouts, so make sure to watch for them. */
+		if (atomic_inc_return(&intf->event_waiters) == 1)
+			need_waiter(intf);
+	}
 	*user = new_user;
 	return 0;
 
@@ -1019,7 +1042,13 @@ int ipmi_destroy_user(ipmi_user_t user)
 	struct cmd_rcvr  *rcvr;
 	struct cmd_rcvr  *rcvrs = NULL;
 
-	user->valid = 0;
+	user->valid = false;
+
+	if (user->handler->ipmi_watchdog_pretimeout)
+		atomic_dec(&intf->event_waiters);
+
+	if (user->gets_events)
+		atomic_dec(&intf->event_waiters);
 
 	/* Remove the user from the interface's sequence table. */
 	spin_lock_irqsave(&intf->seq_lock, flags);
@@ -1155,25 +1184,23 @@ int ipmi_set_maintenance_mode(ipmi_user_t user, int mode)
 	if (intf->maintenance_mode != mode) {
 		switch (mode) {
 		case IPMI_MAINTENANCE_MODE_AUTO:
-			intf->maintenance_mode = mode;
 			intf->maintenance_mode_enable
 				= (intf->auto_maintenance_timeout > 0);
 			break;
 
 		case IPMI_MAINTENANCE_MODE_OFF:
-			intf->maintenance_mode = mode;
-			intf->maintenance_mode_enable = 0;
+			intf->maintenance_mode_enable = false;
 			break;
 
 		case IPMI_MAINTENANCE_MODE_ON:
-			intf->maintenance_mode = mode;
-			intf->maintenance_mode_enable = 1;
+			intf->maintenance_mode_enable = true;
 			break;
 
 		default:
 			rv = -EINVAL;
 			goto out_unlock;
 		}
+		intf->maintenance_mode = mode;
 
 		maintenance_mode_update(intf);
 	}
@@ -1184,7 +1211,7 @@ int ipmi_set_maintenance_mode(ipmi_user_t user, int mode)
 }
 EXPORT_SYMBOL(ipmi_set_maintenance_mode);
 
-int ipmi_set_gets_events(ipmi_user_t user, int val)
+int ipmi_set_gets_events(ipmi_user_t user, bool val)
 {
 	unsigned long        flags;
 	ipmi_smi_t           intf = user->intf;
@@ -1194,8 +1221,18 @@ int ipmi_set_gets_events(ipmi_user_t user, int val)
 	INIT_LIST_HEAD(&msgs);
 
 	spin_lock_irqsave(&intf->events_lock, flags);
+	if (user->gets_events == val)
+		goto out;
+
 	user->gets_events = val;
 
+	if (val) {
+		if (atomic_inc_return(&intf->event_waiters) == 1)
+			need_waiter(intf);
+	} else {
+		atomic_dec(&intf->event_waiters);
+	}
+
 	if (intf->delivering_events)
 		/*
 		 * Another thread is delivering events for this, so
@@ -1289,6 +1326,9 @@ int ipmi_register_for_cmd(ipmi_user_t   user,
 		goto out_unlock;
 	}
 
+	if (atomic_inc_return(&intf->event_waiters) == 1)
+		need_waiter(intf);
+
 	list_add_rcu(&rcvr->link, &intf->cmd_rcvrs);
 
  out_unlock:
@@ -1330,6 +1370,7 @@ int ipmi_unregister_for_cmd(ipmi_user_t   user,
 	mutex_unlock(&intf->cmd_rcvrs_mutex);
 	synchronize_rcu();
 	while (rcvrs) {
+		atomic_dec(&intf->event_waiters);
 		rcvr = rcvrs;
 		rcvrs = rcvr->next;
 		kfree(rcvr);
@@ -1535,7 +1576,7 @@ static int i_ipmi_request(ipmi_user_t          user,
 				= IPMI_MAINTENANCE_MODE_TIMEOUT;
 			if (!intf->maintenance_mode
 			    && !intf->maintenance_mode_enable) {
-				intf->maintenance_mode_enable = 1;
+				intf->maintenance_mode_enable = true;
 				maintenance_mode_update(intf);
 			}
 			spin_unlock_irqrestore(&intf->maintenance_mode_lock,
@@ -2876,6 +2917,8 @@ int ipmi_register_smi(struct ipmi_smi_handlers *handlers,
 		     (unsigned long) intf);
 	atomic_set(&intf->watchdog_pretimeouts_to_deliver, 0);
 	spin_lock_init(&intf->events_lock);
+	atomic_set(&intf->event_waiters, 0);
+	intf->ticks_to_req_ev = IPMI_REQUEST_EV_TIME;
 	INIT_LIST_HEAD(&intf->waiting_events);
 	intf->waiting_events_count = 0;
 	mutex_init(&intf->cmd_rcvrs_mutex);
@@ -3965,7 +4008,8 @@ smi_from_recv_msg(ipmi_smi_t intf, struct ipmi_recv_msg *recv_msg,
 
 static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent,
 			      struct list_head *timeouts, long timeout_period,
-			      int slot, unsigned long *flags)
+			      int slot, unsigned long *flags,
+			      unsigned int *waiting_msgs)
 {
 	struct ipmi_recv_msg     *msg;
 	struct ipmi_smi_handlers *handlers;
@@ -3977,8 +4021,10 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent,
 		return;
 
 	ent->timeout -= timeout_period;
-	if (ent->timeout > 0)
+	if (ent->timeout > 0) {
+		(*waiting_msgs)++;
 		return;
+	}
 
 	if (ent->retries_left == 0) {
 		/* The message has used all its retries. */
@@ -3995,6 +4041,8 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent,
 		struct ipmi_smi_msg *smi_msg;
 		/* More retries, send again. */
 
+		(*waiting_msgs)++;
+
 		/*
 		 * Start with the max timer, set to normal timer after
 		 * the message is sent.
@@ -4040,117 +4088,118 @@ static void check_msg_timeout(ipmi_smi_t intf, struct seq_table *ent,
 	}
 }
 
-static void ipmi_timeout_handler(long timeout_period)
+static unsigned int ipmi_timeout_handler(ipmi_smi_t intf, long timeout_period)
 {
-	ipmi_smi_t           intf;
 	struct list_head     timeouts;
 	struct ipmi_recv_msg *msg, *msg2;
 	unsigned long        flags;
 	int                  i;
+	unsigned int         waiting_msgs = 0;
 
-	rcu_read_lock();
-	list_for_each_entry_rcu(intf, &ipmi_interfaces, link) {
-		tasklet_schedule(&intf->recv_tasklet);
-
-		/*
-		 * Go through the seq table and find any messages that
-		 * have timed out, putting them in the timeouts
-		 * list.
-		 */
-		INIT_LIST_HEAD(&timeouts);
-		spin_lock_irqsave(&intf->seq_lock, flags);
-		for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++)
-			check_msg_timeout(intf, &(intf->seq_table[i]),
-					  &timeouts, timeout_period, i,
-					  &flags);
-		spin_unlock_irqrestore(&intf->seq_lock, flags);
+	/*
+	 * Go through the seq table and find any messages that
+	 * have timed out, putting them in the timeouts
+	 * list.
+	 */
+	INIT_LIST_HEAD(&timeouts);
+	spin_lock_irqsave(&intf->seq_lock, flags);
+	for (i = 0; i < IPMI_IPMB_NUM_SEQ; i++)
+		check_msg_timeout(intf, &(intf->seq_table[i]),
+				  &timeouts, timeout_period, i,
+				  &flags, &waiting_msgs);
+	spin_unlock_irqrestore(&intf->seq_lock, flags);
 
-		list_for_each_entry_safe(msg, msg2, &timeouts, link)
-			deliver_err_response(msg, IPMI_TIMEOUT_COMPLETION_CODE);
+	list_for_each_entry_safe(msg, msg2, &timeouts, link)
+		deliver_err_response(msg, IPMI_TIMEOUT_COMPLETION_CODE);
 
-		/*
-		 * Maintenance mode handling.  Check the timeout
-		 * optimistically before we claim the lock.  It may
-		 * mean a timeout gets missed occasionally, but that
-		 * only means the timeout gets extended by one period
-		 * in that case.  No big deal, and it avoids the lock
-		 * most of the time.
-		 */
+	/*
+	 * Maintenance mode handling.  Check the timeout
+	 * optimistically before we claim the lock.  It may
+	 * mean a timeout gets missed occasionally, but that
+	 * only means the timeout gets extended by one period
+	 * in that case.  No big deal, and it avoids the lock
+	 * most of the time.
+	 */
+	if (intf->auto_maintenance_timeout > 0) {
+		spin_lock_irqsave(&intf->maintenance_mode_lock, flags);
 		if (intf->auto_maintenance_timeout > 0) {
-			spin_lock_irqsave(&intf->maintenance_mode_lock, flags);
-			if (intf->auto_maintenance_timeout > 0) {
-				intf->auto_maintenance_timeout
-					-= timeout_period;
-				if (!intf->maintenance_mode
-				    && (intf->auto_maintenance_timeout <= 0)) {
-					intf->maintenance_mode_enable = 0;
-					maintenance_mode_update(intf);
-				}
+			intf->auto_maintenance_timeout
+				-= timeout_period;
+			if (!intf->maintenance_mode
+			    && (intf->auto_maintenance_timeout <= 0)) {
+				intf->maintenance_mode_enable = false;
+				maintenance_mode_update(intf);
 			}
-			spin_unlock_irqrestore(&intf->maintenance_mode_lock,
-					       flags);
 		}
+		spin_unlock_irqrestore(&intf->maintenance_mode_lock,
+				       flags);
 	}
-	rcu_read_unlock();
+
+	tasklet_schedule(&intf->recv_tasklet);
+
+	return waiting_msgs;
 }
 
-static void ipmi_request_event(void)
+static void ipmi_request_event(ipmi_smi_t intf)
 {
-	ipmi_smi_t               intf;
 	struct ipmi_smi_handlers *handlers;
 
-	rcu_read_lock();
-	/*
-	 * Called from the timer, no need to check if handlers is
-	 * valid.
-	 */
-	list_for_each_entry_rcu(intf, &ipmi_interfaces, link) {
-		/* No event requests when in maintenance mode. */
-		if (intf->maintenance_mode_enable)
-			continue;
+	/* No event requests when in maintenance mode. */
+	if (intf->maintenance_mode_enable)
+		return;
 
-		handlers = intf->handlers;
-		if (handlers)
-			handlers->request_events(intf->send_info);
-	}
-	rcu_read_unlock();
+	handlers = intf->handlers;
+	if (handlers)
+		handlers->request_events(intf->send_info);
 }
 
 static struct timer_list ipmi_timer;
 
-/* Call every ~1000 ms. */
-#define IPMI_TIMEOUT_TIME	1000
-
-/* How many jiffies does it take to get to the timeout time. */
-#define IPMI_TIMEOUT_JIFFIES	((IPMI_TIMEOUT_TIME * HZ) / 1000)
-
-/*
- * Request events from the queue every second (this is the number of
- * IPMI_TIMEOUT_TIMES between event requests).  Hopefully, in the
- * future, IPMI will add a way to know immediately if an event is in
- * the queue and this silliness can go away.
- */
-#define IPMI_REQUEST_EV_TIME	(1000 / (IPMI_TIMEOUT_TIME))
-
 static atomic_t stop_operation;
-static unsigned int ticks_to_req_ev = IPMI_REQUEST_EV_TIME;
 
 static void ipmi_timeout(unsigned long data)
 {
+	ipmi_smi_t intf;
+	int nt = 0;
+
 	if (atomic_read(&stop_operation))
 		return;
 
-	ticks_to_req_ev--;
-	if (ticks_to_req_ev == 0) {
-		ipmi_request_event();
-		ticks_to_req_ev = IPMI_REQUEST_EV_TIME;
-	}
+	rcu_read_lock();
+	list_for_each_entry_rcu(intf, &ipmi_interfaces, link) {
+		int lnt = 0;
+
+		if (atomic_read(&intf->event_waiters)) {
+			intf->ticks_to_req_ev--;
+			if (intf->ticks_to_req_ev == 0) {
+				ipmi_request_event(intf);
+				intf->ticks_to_req_ev = IPMI_REQUEST_EV_TIME;
+			}
+			lnt++;
+		}
 
-	ipmi_timeout_handler(IPMI_TIMEOUT_TIME);
+		lnt += ipmi_timeout_handler(intf, IPMI_TIMEOUT_TIME);
 
-	mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES);
+		lnt = !!lnt;
+		if (lnt != intf->last_needs_timer &&
+					intf->handlers->set_need_watch)
+			intf->handlers->set_need_watch(intf->send_info, lnt);
+		intf->last_needs_timer = lnt;
+
+		nt += lnt;
+	}
+	rcu_read_unlock();
+
+	if (nt)
+		mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES);
 }
 
+static void need_waiter(ipmi_smi_t intf)
+{
+	/* Racy, but worst case we start the timer twice. */
+	if (!timer_pending(&ipmi_timer))
+		mod_timer(&ipmi_timer, jiffies + IPMI_TIMEOUT_JIFFIES);
+}
 
 static atomic_t smi_msg_inuse_count = ATOMIC_INIT(0);
 static atomic_t recv_msg_inuse_count = ATOMIC_INIT(0);
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c
index b7efd3c1a882..1c4bb4f6ce93 100644
--- a/drivers/char/ipmi/ipmi_si_intf.c
+++ b/drivers/char/ipmi/ipmi_si_intf.c
@@ -217,7 +217,7 @@ struct smi_info {
 	unsigned char       msg_flags;
 
 	/* Does the BMC have an event buffer? */
-	char		    has_event_buffer;
+	bool		    has_event_buffer;
 
 	/*
 	 * If set to true, this will request events the next time the
@@ -230,7 +230,7 @@ struct smi_info {
 	 * call.  Generally used after a panic to make sure stuff goes
 	 * out.
 	 */
-	int                 run_to_completion;
+	bool                run_to_completion;
 
 	/* The I/O port of an SI interface. */
 	int                 port;
@@ -248,19 +248,25 @@ struct smi_info {
 	/* The timer for this si. */
 	struct timer_list   si_timer;
 
+	/* This flag is set, if the timer is running (timer_pending() isn't enough) */
+	bool		    timer_running;
+
 	/* The time (in jiffies) the last timeout occurred at. */
 	unsigned long       last_timeout_jiffies;
 
 	/* Used to gracefully stop the timer without race conditions. */
 	atomic_t            stop_operation;
 
+	/* Are we waiting for the events, pretimeouts, received msgs? */
+	atomic_t            need_watch;
+
 	/*
 	 * The driver will disable interrupts when it gets into a
 	 * situation where it cannot handle messages due to lack of
 	 * memory.  Once that situation clears up, it will re-enable
 	 * interrupts.
 	 */
-	int interrupt_disabled;
+	bool interrupt_disabled;
 
 	/* From the get device id response... */
 	struct ipmi_device_id device_id;
@@ -273,7 +279,7 @@ struct smi_info {
 	 * True if we allocated the device, false if it came from
 	 * someplace else (like PCI).
 	 */
-	int dev_registered;
+	bool dev_registered;
 
 	/* Slave address, could be reported from DMI. */
 	unsigned char slave_addr;
@@ -297,19 +303,19 @@ struct smi_info {
 static int force_kipmid[SI_MAX_PARMS];
 static int num_force_kipmid;
 #ifdef CONFIG_PCI
-static int pci_registered;
+static bool pci_registered;
 #endif
 #ifdef CONFIG_ACPI
-static int pnp_registered;
+static bool pnp_registered;
 #endif
 #ifdef CONFIG_PARISC
-static int parisc_registered;
+static bool parisc_registered;
 #endif
 
 static unsigned int kipmid_max_busy_us[SI_MAX_PARMS];
 static int num_max_busy_us;
 
-static int unload_when_empty = 1;
+static bool unload_when_empty = true;
 
 static int add_smi(struct smi_info *smi);
 static int try_smi_init(struct smi_info *smi);
@@ -434,6 +440,13 @@ static void start_clear_flags(struct smi_info *smi_info)
 	smi_info->si_state = SI_CLEARING_FLAGS;
 }
 
+static void smi_mod_timer(struct smi_info *smi_info, unsigned long new_val)
+{
+	smi_info->last_timeout_jiffies = jiffies;
+	mod_timer(&smi_info->si_timer, new_val);
+	smi_info->timer_running = true;
+}
+
 /*
  * When we have a situtaion where we run out of memory and cannot
  * allocate messages, we just leave them in the BMC and run the system
@@ -444,10 +457,9 @@ static inline void disable_si_irq(struct smi_info *smi_info)
 {
 	if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
 		start_disable_irq(smi_info);
-		smi_info->interrupt_disabled = 1;
+		smi_info->interrupt_disabled = true;
 		if (!atomic_read(&smi_info->stop_operation))
-			mod_timer(&smi_info->si_timer,
-				  jiffies + SI_TIMEOUT_JIFFIES);
+			smi_mod_timer(smi_info, jiffies + SI_TIMEOUT_JIFFIES);
 	}
 }
 
@@ -455,7 +467,7 @@ static inline void enable_si_irq(struct smi_info *smi_info)
 {
 	if ((smi_info->irq) && (smi_info->interrupt_disabled)) {
 		start_enable_irq(smi_info);
-		smi_info->interrupt_disabled = 0;
+		smi_info->interrupt_disabled = false;
 	}
 }
 
@@ -700,7 +712,7 @@ static void handle_transaction_done(struct smi_info *smi_info)
 			dev_warn(smi_info->dev,
 				 "Maybe ok, but ipmi might run very slowly.\n");
 		} else
-			smi_info->interrupt_disabled = 0;
+			smi_info->interrupt_disabled = false;
 		smi_info->si_state = SI_NORMAL;
 		break;
 	}
@@ -853,6 +865,19 @@ static enum si_sm_result smi_event_handler(struct smi_info *smi_info,
 	return si_sm_result;
 }
 
+static void check_start_timer_thread(struct smi_info *smi_info)
+{
+	if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL) {
+		smi_mod_timer(smi_info, jiffies + SI_TIMEOUT_JIFFIES);
+
+		if (smi_info->thread)
+			wake_up_process(smi_info->thread);
+
+		start_next_msg(smi_info);
+		smi_event_handler(smi_info, 0);
+	}
+}
+
 static void sender(void                *send_info,
 		   struct ipmi_smi_msg *msg,
 		   int                 priority)
@@ -906,27 +931,11 @@ static void sender(void                *send_info,
 	else
 		list_add_tail(&msg->link, &smi_info->xmit_msgs);
 
-	if (smi_info->si_state == SI_NORMAL && smi_info->curr_msg == NULL) {
-		/*
-		 * last_timeout_jiffies is updated here to avoid
-		 * smi_timeout() handler passing very large time_diff
-		 * value to smi_event_handler() that causes
-		 * the send command to abort.
-		 */
-		smi_info->last_timeout_jiffies = jiffies;
-
-		mod_timer(&smi_info->si_timer, jiffies + SI_TIMEOUT_JIFFIES);
-
-		if (smi_info->thread)
-			wake_up_process(smi_info->thread);
-
-		start_next_msg(smi_info);
-		smi_event_handler(smi_info, 0);
-	}
+	check_start_timer_thread(smi_info);
 	spin_unlock_irqrestore(&smi_info->si_lock, flags);
 }
 
-static void set_run_to_completion(void *send_info, int i_run_to_completion)
+static void set_run_to_completion(void *send_info, bool i_run_to_completion)
 {
 	struct smi_info   *smi_info = send_info;
 	enum si_sm_result result;
@@ -1004,6 +1013,17 @@ static int ipmi_thread(void *data)
 
 		spin_lock_irqsave(&(smi_info->si_lock), flags);
 		smi_result = smi_event_handler(smi_info, 0);
+
+		/*
+		 * If the driver is doing something, there is a possible
+		 * race with the timer.  If the timer handler see idle,
+		 * and the thread here sees something else, the timer
+		 * handler won't restart the timer even though it is
+		 * required.  So start it here if necessary.
+		 */
+		if (smi_result != SI_SM_IDLE && !smi_info->timer_running)
+			smi_mod_timer(smi_info, jiffies + SI_TIMEOUT_JIFFIES);
+
 		spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 		busy_wait = ipmi_thread_busy_wait(smi_result, smi_info,
 						  &busy_until);
@@ -1011,9 +1031,15 @@ static int ipmi_thread(void *data)
 			; /* do nothing */
 		else if (smi_result == SI_SM_CALL_WITH_DELAY && busy_wait)
 			schedule();
-		else if (smi_result == SI_SM_IDLE)
-			schedule_timeout_interruptible(100);
-		else
+		else if (smi_result == SI_SM_IDLE) {
+			if (atomic_read(&smi_info->need_watch)) {
+				schedule_timeout_interruptible(100);
+			} else {
+				/* Wait to be woken up when we are needed. */
+				__set_current_state(TASK_INTERRUPTIBLE);
+				schedule();
+			}
+		} else
 			schedule_timeout_interruptible(1);
 	}
 	return 0;
@@ -1024,7 +1050,7 @@ static void poll(void *send_info)
 {
 	struct smi_info *smi_info = send_info;
 	unsigned long flags = 0;
-	int run_to_completion = smi_info->run_to_completion;
+	bool run_to_completion = smi_info->run_to_completion;
 
 	/*
 	 * Make sure there is some delay in the poll loop so we can
@@ -1049,6 +1075,17 @@ static void request_events(void *send_info)
 	atomic_set(&smi_info->req_events, 1);
 }
 
+static void set_need_watch(void *send_info, bool enable)
+{
+	struct smi_info *smi_info = send_info;
+	unsigned long flags;
+
+	atomic_set(&smi_info->need_watch, enable);
+	spin_lock_irqsave(&smi_info->si_lock, flags);
+	check_start_timer_thread(smi_info);
+	spin_unlock_irqrestore(&smi_info->si_lock, flags);
+}
+
 static int initialized;
 
 static void smi_timeout(unsigned long data)
@@ -1073,10 +1110,6 @@ static void smi_timeout(unsigned long data)
 		     * SI_USEC_PER_JIFFY);
 	smi_result = smi_event_handler(smi_info, time_diff);
 
-	spin_unlock_irqrestore(&(smi_info->si_lock), flags);
-
-	smi_info->last_timeout_jiffies = jiffies_now;
-
 	if ((smi_info->irq) && (!smi_info->interrupt_disabled)) {
 		/* Running with interrupts, only do long timeouts. */
 		timeout = jiffies + SI_TIMEOUT_JIFFIES;
@@ -1098,7 +1131,10 @@ static void smi_timeout(unsigned long data)
 
  do_mod_timer:
 	if (smi_result != SI_SM_IDLE)
-		mod_timer(&(smi_info->si_timer), timeout);
+		smi_mod_timer(smi_info, timeout);
+	else
+		smi_info->timer_running = false;
+	spin_unlock_irqrestore(&(smi_info->si_lock), flags);
 }
 
 static irqreturn_t si_irq_handler(int irq, void *data)
@@ -1146,8 +1182,7 @@ static int smi_start_processing(void       *send_info,
 
 	/* Set up the timer that drives the interface. */
 	setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi);
-	new_smi->last_timeout_jiffies = jiffies;
-	mod_timer(&new_smi->si_timer, jiffies + SI_TIMEOUT_JIFFIES);
+	smi_mod_timer(new_smi, jiffies + SI_TIMEOUT_JIFFIES);
 
 	/*
 	 * Check if the user forcefully enabled the daemon.
@@ -1188,7 +1223,7 @@ static int get_smi_info(void *send_info, struct ipmi_smi_info *data)
 	return 0;
 }
 
-static void set_maintenance_mode(void *send_info, int enable)
+static void set_maintenance_mode(void *send_info, bool enable)
 {
 	struct smi_info   *smi_info = send_info;
 
@@ -1202,6 +1237,7 @@ static struct ipmi_smi_handlers handlers = {
 	.get_smi_info		= get_smi_info,
 	.sender			= sender,
 	.request_events		= request_events,
+	.set_need_watch		= set_need_watch,
 	.set_maintenance_mode   = set_maintenance_mode,
 	.set_run_to_completion  = set_run_to_completion,
 	.poll			= poll,
@@ -1229,7 +1265,7 @@ static bool          si_tryplatform = 1;
 #ifdef CONFIG_PCI
 static bool          si_trypci = 1;
 #endif
-static bool          si_trydefaults = 1;
+static bool          si_trydefaults = IS_ENABLED(CONFIG_IPMI_SI_PROBE_DEFAULTS);
 static char          *si_type[SI_MAX_PARMS];
 #define MAX_SI_TYPE_STR 30
 static char          si_type_str[MAX_SI_TYPE_STR];
@@ -1328,7 +1364,7 @@ module_param_array(force_kipmid, int, &num_force_kipmid, 0);
 MODULE_PARM_DESC(force_kipmid, "Force the kipmi daemon to be enabled (1) or"
 		 " disabled(0).  Normally the IPMI driver auto-detects"
 		 " this, but the value may be overridden by this parm.");
-module_param(unload_when_empty, int, 0);
+module_param(unload_when_empty, bool, 0);
 MODULE_PARM_DESC(unload_when_empty, "Unload the module if no interfaces are"
 		 " specified or found, default is 1.  Setting to 0"
 		 " is useful for hot add of devices using hotmod.");
@@ -3336,18 +3372,19 @@ static int try_smi_init(struct smi_info *new_smi)
 	INIT_LIST_HEAD(&(new_smi->hp_xmit_msgs));
 	new_smi->curr_msg = NULL;
 	atomic_set(&new_smi->req_events, 0);
-	new_smi->run_to_completion = 0;
+	new_smi->run_to_completion = false;
 	for (i = 0; i < SI_NUM_STATS; i++)
 		atomic_set(&new_smi->stats[i], 0);
 
-	new_smi->interrupt_disabled = 1;
+	new_smi->interrupt_disabled = true;
 	atomic_set(&new_smi->stop_operation, 0);
+	atomic_set(&new_smi->need_watch, 0);
 	new_smi->intf_num = smi_num;
 	smi_num++;
 
 	rv = try_enable_event_buffer(new_smi);
 	if (rv == 0)
-		new_smi->has_event_buffer = 1;
+		new_smi->has_event_buffer = true;
 
 	/*
 	 * Start clearing the flags before we enable interrupts or the
@@ -3381,7 +3418,7 @@ static int try_smi_init(struct smi_info *new_smi)
 			       rv);
 			goto out_err;
 		}
-		new_smi->dev_registered = 1;
+		new_smi->dev_registered = true;
 	}
 
 	rv = ipmi_register_smi(&handlers,
@@ -3430,7 +3467,7 @@ static int try_smi_init(struct smi_info *new_smi)
 	wait_for_timer_and_thread(new_smi);
 
  out_err:
-	new_smi->interrupt_disabled = 1;
+	new_smi->interrupt_disabled = true;
 
 	if (new_smi->intf) {
 		ipmi_unregister_smi(new_smi->intf);
@@ -3466,7 +3503,7 @@ static int try_smi_init(struct smi_info *new_smi)
 
 	if (new_smi->dev_registered) {
 		platform_device_unregister(new_smi->pdev);
-		new_smi->dev_registered = 0;
+		new_smi->dev_registered = false;
 	}
 
 	return rv;
@@ -3521,14 +3558,14 @@ static int init_ipmi_si(void)
 			printk(KERN_ERR PFX "Unable to register "
 			       "PCI driver: %d\n", rv);
 		else
-			pci_registered = 1;
+			pci_registered = true;
 	}
 #endif
 
 #ifdef CONFIG_ACPI
 	if (si_tryacpi) {
 		pnp_register_driver(&ipmi_pnp_driver);
-		pnp_registered = 1;
+		pnp_registered = true;
 	}
 #endif
 
@@ -3544,7 +3581,7 @@ static int init_ipmi_si(void)
 
 #ifdef CONFIG_PARISC
 	register_parisc_driver(&ipmi_parisc_driver);
-	parisc_registered = 1;
+	parisc_registered = true;
 	/* poking PC IO addresses will crash machine, don't do it */
 	si_trydefaults = 0;
 #endif
diff --git a/drivers/gpio/gpio-spear-spics.c b/drivers/gpio/gpio-spear-spics.c
index e9a0415834ea..30bcc539425d 100644
--- a/drivers/gpio/gpio-spear-spics.c
+++ b/drivers/gpio/gpio-spear-spics.c
@@ -2,7 +2,7 @@
  * SPEAr platform SPI chipselect abstraction over gpiolib
  *
  * Copyright (C) 2012 ST Microelectronics
- * Shiraz Hashim <shiraz.hashim@st.com>
+ * Shiraz Hashim <shiraz.linux.kernel@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -205,6 +205,6 @@ static int __init spics_gpio_init(void)
 }
 subsys_initcall(spics_gpio_init);
 
-MODULE_AUTHOR("Shiraz Hashim <shiraz.hashim@st.com>");
+MODULE_AUTHOR("Shiraz Hashim <shiraz.linux.kernel@gmail.com>");
 MODULE_DESCRIPTION("ST Microlectronics SPEAr SPI Chip Select Abstraction");
 MODULE_LICENSE("GPL");
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 9e8064205bc7..10a2c0866459 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -718,6 +718,9 @@ static int hid_scan_main(struct hid_parser *parser, struct hid_item *item)
 	case HID_MAIN_ITEM_TAG_END_COLLECTION:
 		break;
 	case HID_MAIN_ITEM_TAG_INPUT:
+		/* ignore constant inputs, they will be ignored by hid-input */
+		if (data & HID_MAIN_ITEM_CONSTANT)
+			break;
 		for (i = 0; i < parser->local.usage_index; i++)
 			hid_scan_input_usage(parser, parser->local.usage[i]);
 		break;
@@ -1821,8 +1824,6 @@ static const struct hid_device_id hid_have_special_driver[] = {
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_USB) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_WIRELESS_OPTICAL_DESKTOP_3_0) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_2) },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TOUCH_COVER_2) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_OFFICE_KB) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MONTEREY, USB_DEVICE_ID_GENIUS_KB29E) },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_NTRIG, USB_DEVICE_ID_NTRIG_TOUCH_SCREEN) },
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index bd221263c739..c8af7202c28d 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -455,7 +455,8 @@
 
 #define USB_VENDOR_ID_INTEL_0		0x8086
 #define USB_VENDOR_ID_INTEL_1		0x8087
-#define USB_DEVICE_ID_INTEL_HID_SENSOR	0x09fa
+#define USB_DEVICE_ID_INTEL_HID_SENSOR_0	0x09fa
+#define USB_DEVICE_ID_INTEL_HID_SENSOR_1	0x0a04
 
 #define USB_VENDOR_ID_STM_0             0x0483
 #define USB_DEVICE_ID_STM_HID_SENSOR    0x91d1
@@ -629,8 +630,6 @@
 #define USB_DEVICE_ID_MS_PRESENTER_8K_USB	0x0713
 #define USB_DEVICE_ID_MS_DIGITAL_MEDIA_3K	0x0730
 #define USB_DEVICE_ID_MS_COMFORT_MOUSE_4500	0x076c
-#define USB_DEVICE_ID_MS_TOUCH_COVER_2	0x07a7
-#define USB_DEVICE_ID_MS_TYPE_COVER_2	0x07a9
 
 #define USB_VENDOR_ID_MOJO		0x8282
 #define USB_DEVICE_ID_RETRO_ADAPTER	0x3201
diff --git a/drivers/hid/hid-microsoft.c b/drivers/hid/hid-microsoft.c
index 6fd58175a291..8ba17a946f2a 100644
--- a/drivers/hid/hid-microsoft.c
+++ b/drivers/hid/hid-microsoft.c
@@ -274,10 +274,6 @@ static const struct hid_device_id ms_devices[] = {
 		.driver_data = MS_NOGET },
 	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_COMFORT_MOUSE_4500),
 		.driver_data = MS_DUPLICATE_USAGES },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TYPE_COVER_2),
-		.driver_data = 0 },
-	{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_TOUCH_COVER_2),
-		.driver_data = 0 },
 
 	{ HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_PRESENTER_8K_BT),
 		.driver_data = MS_PRESENTER },
diff --git a/drivers/hid/hid-sensor-hub.c b/drivers/hid/hid-sensor-hub.c
index 5182031f7b52..af8244b1c1f4 100644
--- a/drivers/hid/hid-sensor-hub.c
+++ b/drivers/hid/hid-sensor-hub.c
@@ -697,10 +697,13 @@ static void sensor_hub_remove(struct hid_device *hdev)
 
 static const struct hid_device_id sensor_hub_devices[] = {
 	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_INTEL_0,
-			USB_DEVICE_ID_INTEL_HID_SENSOR),
+			USB_DEVICE_ID_INTEL_HID_SENSOR_0),
 			.driver_data = HID_SENSOR_HUB_ENUM_QUIRK},
 	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_INTEL_1,
-			USB_DEVICE_ID_INTEL_HID_SENSOR),
+			USB_DEVICE_ID_INTEL_HID_SENSOR_0),
+			.driver_data = HID_SENSOR_HUB_ENUM_QUIRK},
+	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_INTEL_1,
+			USB_DEVICE_ID_INTEL_HID_SENSOR_1),
 			.driver_data = HID_SENSOR_HUB_ENUM_QUIRK},
 	{ HID_DEVICE(HID_BUS_ANY, HID_GROUP_SENSOR_HUB, USB_VENDOR_ID_STM_0,
 			USB_DEVICE_ID_STM_HID_SENSOR),
diff --git a/drivers/hid/hid-sony.c b/drivers/hid/hid-sony.c
index 69204afea7a4..908de2789219 100644
--- a/drivers/hid/hid-sony.c
+++ b/drivers/hid/hid-sony.c
@@ -1721,8 +1721,6 @@ static void sony_remove(struct hid_device *hdev)
 	if (sc->quirks & SONY_LED_SUPPORT)
 		sony_leds_remove(hdev);
 
-	if (sc->worker_initialized)
-		cancel_work_sync(&sc->state_worker);
 	if (sc->quirks & SONY_BATTERY_SUPPORT) {
 		hid_hw_close(hdev);
 		sony_battery_remove(sc);
diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c
index 02436d5d0dab..185452abf32c 100644
--- a/drivers/infiniband/hw/cxgb4/cm.c
+++ b/drivers/infiniband/hw/cxgb4/cm.c
@@ -173,12 +173,15 @@ static void start_ep_timer(struct c4iw_ep *ep)
 	add_timer(&ep->timer);
 }
 
-static void stop_ep_timer(struct c4iw_ep *ep)
+static int stop_ep_timer(struct c4iw_ep *ep)
 {
 	PDBG("%s ep %p stopping\n", __func__, ep);
 	del_timer_sync(&ep->timer);
-	if (!test_and_set_bit(TIMEOUT, &ep->com.flags))
+	if (!test_and_set_bit(TIMEOUT, &ep->com.flags)) {
 		c4iw_put_ep(&ep->com);
+		return 0;
+	}
+	return 1;
 }
 
 static int c4iw_l2t_send(struct c4iw_rdev *rdev, struct sk_buff *skb,
@@ -1165,12 +1168,11 @@ static void process_mpa_reply(struct c4iw_ep *ep, struct sk_buff *skb)
 	PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
 
 	/*
-	 * Stop mpa timer.  If it expired, then the state has
-	 * changed and we bail since ep_timeout already aborted
-	 * the connection.
+	 * Stop mpa timer.  If it expired, then
+	 * we ignore the MPA reply.  process_timeout()
+	 * will abort the connection.
 	 */
-	stop_ep_timer(ep);
-	if (ep->com.state != MPA_REQ_SENT)
+	if (stop_ep_timer(ep))
 		return;
 
 	/*
@@ -1375,15 +1377,12 @@ static void process_mpa_request(struct c4iw_ep *ep, struct sk_buff *skb)
 
 	PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid);
 
-	if (ep->com.state != MPA_REQ_WAIT)
-		return;
-
 	/*
 	 * If we get more than the supported amount of private data
 	 * then we must fail this connection.
 	 */
 	if (ep->mpa_pkt_len + skb->len > sizeof(ep->mpa_pkt)) {
-		stop_ep_timer(ep);
+		(void)stop_ep_timer(ep);
 		abort_connection(ep, skb, GFP_KERNEL);
 		return;
 	}
@@ -1413,13 +1412,13 @@ static void process_mpa_request(struct c4iw_ep *ep, struct sk_buff *skb)
 	if (mpa->revision > mpa_rev) {
 		printk(KERN_ERR MOD "%s MPA version mismatch. Local = %d,"
 		       " Received = %d\n", __func__, mpa_rev, mpa->revision);
-		stop_ep_timer(ep);
+		(void)stop_ep_timer(ep);
 		abort_connection(ep, skb, GFP_KERNEL);
 		return;
 	}
 
 	if (memcmp(mpa->key, MPA_KEY_REQ, sizeof(mpa->key))) {
-		stop_ep_timer(ep);
+		(void)stop_ep_timer(ep);
 		abort_connection(ep, skb, GFP_KERNEL);
 		return;
 	}
@@ -1430,7 +1429,7 @@ static void process_mpa_request(struct c4iw_ep *ep, struct sk_buff *skb)
 	 * Fail if there's too much private data.
 	 */
 	if (plen > MPA_MAX_PRIVATE_DATA) {
-		stop_ep_timer(ep);
+		(void)stop_ep_timer(ep);
 		abort_connection(ep, skb, GFP_KERNEL);
 		return;
 	}
@@ -1439,7 +1438,7 @@ static void process_mpa_request(struct c4iw_ep *ep, struct sk_buff *skb)
 	 * If plen does not account for pkt size
 	 */
 	if (ep->mpa_pkt_len > (sizeof(*mpa) + plen)) {
-		stop_ep_timer(ep);
+		(void)stop_ep_timer(ep);
 		abort_connection(ep, skb, GFP_KERNEL);
 		return;
 	}
@@ -1496,18 +1495,24 @@ static void process_mpa_request(struct c4iw_ep *ep, struct sk_buff *skb)
 	     ep->mpa_attr.xmit_marker_enabled, ep->mpa_attr.version,
 	     ep->mpa_attr.p2p_type);
 
-	__state_set(&ep->com, MPA_REQ_RCVD);
-	stop_ep_timer(ep);
-
-	/* drive upcall */
-	mutex_lock(&ep->parent_ep->com.mutex);
-	if (ep->parent_ep->com.state != DEAD) {
-		if (connect_request_upcall(ep))
+	/*
+	 * If the endpoint timer already expired, then we ignore
+	 * the start request.  process_timeout() will abort
+	 * the connection.
+	 */
+	if (!stop_ep_timer(ep)) {
+		__state_set(&ep->com, MPA_REQ_RCVD);
+
+		/* drive upcall */
+		mutex_lock(&ep->parent_ep->com.mutex);
+		if (ep->parent_ep->com.state != DEAD) {
+			if (connect_request_upcall(ep))
+				abort_connection(ep, skb, GFP_KERNEL);
+		} else {
 			abort_connection(ep, skb, GFP_KERNEL);
-	} else {
-		abort_connection(ep, skb, GFP_KERNEL);
+		}
+		mutex_unlock(&ep->parent_ep->com.mutex);
 	}
-	mutex_unlock(&ep->parent_ep->com.mutex);
 	return;
 }
 
@@ -2265,7 +2270,7 @@ static int peer_close(struct c4iw_dev *dev, struct sk_buff *skb)
 		disconnect = 0;
 		break;
 	case MORIBUND:
-		stop_ep_timer(ep);
+		(void)stop_ep_timer(ep);
 		if (ep->com.cm_id && ep->com.qp) {
 			attrs.next_state = C4IW_QP_STATE_IDLE;
 			c4iw_modify_qp(ep->com.qp->rhp, ep->com.qp,
@@ -2325,10 +2330,10 @@ static int peer_abort(struct c4iw_dev *dev, struct sk_buff *skb)
 	case CONNECTING:
 		break;
 	case MPA_REQ_WAIT:
-		stop_ep_timer(ep);
+		(void)stop_ep_timer(ep);
 		break;
 	case MPA_REQ_SENT:
-		stop_ep_timer(ep);
+		(void)stop_ep_timer(ep);
 		if (mpa_rev == 1 || (mpa_rev == 2 && ep->tried_with_mpa_v1))
 			connect_reply_upcall(ep, -ECONNRESET);
 		else {
@@ -2433,7 +2438,7 @@ static int close_con_rpl(struct c4iw_dev *dev, struct sk_buff *skb)
 		__state_set(&ep->com, MORIBUND);
 		break;
 	case MORIBUND:
-		stop_ep_timer(ep);
+		(void)stop_ep_timer(ep);
 		if ((ep->com.cm_id) && (ep->com.qp)) {
 			attrs.next_state = C4IW_QP_STATE_IDLE;
 			c4iw_modify_qp(ep->com.qp->rhp,
@@ -3028,7 +3033,7 @@ int c4iw_ep_disconnect(struct c4iw_ep *ep, int abrupt, gfp_t gfp)
 		if (!test_and_set_bit(CLOSE_SENT, &ep->com.flags)) {
 			close = 1;
 			if (abrupt) {
-				stop_ep_timer(ep);
+				(void)stop_ep_timer(ep);
 				ep->com.state = ABORTING;
 			} else
 				ep->com.state = MORIBUND;
@@ -3462,6 +3467,16 @@ static void process_timeout(struct c4iw_ep *ep)
 		__state_set(&ep->com, ABORTING);
 		close_complete_upcall(ep, -ETIMEDOUT);
 		break;
+	case ABORTING:
+	case DEAD:
+
+		/*
+		 * These states are expected if the ep timed out at the same
+		 * time as another thread was calling stop_ep_timer().
+		 * So we silently do nothing for these states.
+		 */
+		abort = 0;
+		break;
 	default:
 		WARN(1, "%s unexpected state ep %p tid %u state %u\n",
 			__func__, ep, ep->hwtid, ep->com.state);
@@ -3483,6 +3498,8 @@ static void process_timedout_eps(void)
 
 		tmp = timeout_list.next;
 		list_del(tmp);
+		tmp->next = NULL;
+		tmp->prev = NULL;
 		spin_unlock_irq(&timeout_lock);
 		ep = list_entry(tmp, struct c4iw_ep, entry);
 		process_timeout(ep);
@@ -3499,6 +3516,7 @@ static void process_work(struct work_struct *work)
 	unsigned int opcode;
 	int ret;
 
+	process_timedout_eps();
 	while ((skb = skb_dequeue(&rxq))) {
 		rpl = cplhdr(skb);
 		dev = *((struct c4iw_dev **) (skb->cb + sizeof(void *)));
@@ -3508,8 +3526,8 @@ static void process_work(struct work_struct *work)
 		ret = work_handlers[opcode](dev, skb);
 		if (!ret)
 			kfree_skb(skb);
+		process_timedout_eps();
 	}
-	process_timedout_eps();
 }
 
 static DECLARE_WORK(skb_work, process_work);
@@ -3521,8 +3539,13 @@ static void ep_timeout(unsigned long arg)
 
 	spin_lock(&timeout_lock);
 	if (!test_and_set_bit(TIMEOUT, &ep->com.flags)) {
-		list_add_tail(&ep->entry, &timeout_list);
-		kickit = 1;
+		/*
+		 * Only insert if it is not already on the list.
+		 */
+		if (!ep->entry.next) {
+			list_add_tail(&ep->entry, &timeout_list);
+			kickit = 1;
+		}
 	}
 	spin_unlock(&timeout_lock);
 	if (kickit)
diff --git a/drivers/infiniband/hw/cxgb4/cq.c b/drivers/infiniband/hw/cxgb4/cq.c
index ce468e542428..cfaa56ada189 100644
--- a/drivers/infiniband/hw/cxgb4/cq.c
+++ b/drivers/infiniband/hw/cxgb4/cq.c
@@ -235,27 +235,21 @@ int c4iw_flush_sq(struct c4iw_qp *qhp)
 	struct t4_cq *cq = &chp->cq;
 	int idx;
 	struct t4_swsqe *swsqe;
-	int error = (qhp->attr.state != C4IW_QP_STATE_CLOSING &&
-			qhp->attr.state != C4IW_QP_STATE_IDLE);
 
 	if (wq->sq.flush_cidx == -1)
 		wq->sq.flush_cidx = wq->sq.cidx;
 	idx = wq->sq.flush_cidx;
 	BUG_ON(idx >= wq->sq.size);
 	while (idx != wq->sq.pidx) {
-		if (error) {
-			swsqe = &wq->sq.sw_sq[idx];
-			BUG_ON(swsqe->flushed);
-			swsqe->flushed = 1;
-			insert_sq_cqe(wq, cq, swsqe);
-			if (wq->sq.oldest_read == swsqe) {
-				BUG_ON(swsqe->opcode != FW_RI_READ_REQ);
-				advance_oldest_read(wq);
-			}
-			flushed++;
-		} else {
-			t4_sq_consume(wq);
+		swsqe = &wq->sq.sw_sq[idx];
+		BUG_ON(swsqe->flushed);
+		swsqe->flushed = 1;
+		insert_sq_cqe(wq, cq, swsqe);
+		if (wq->sq.oldest_read == swsqe) {
+			BUG_ON(swsqe->opcode != FW_RI_READ_REQ);
+			advance_oldest_read(wq);
 		}
+		flushed++;
 		if (++idx == wq->sq.size)
 			idx = 0;
 	}
@@ -678,7 +672,7 @@ skip_cqe:
 static int c4iw_poll_cq_one(struct c4iw_cq *chp, struct ib_wc *wc)
 {
 	struct c4iw_qp *qhp = NULL;
-	struct t4_cqe cqe = {0, 0}, *rd_cqe;
+	struct t4_cqe uninitialized_var(cqe), *rd_cqe;
 	struct t4_wq *wq;
 	u32 credit = 0;
 	u8 cqe_flushed;
diff --git a/drivers/infiniband/hw/cxgb4/device.c b/drivers/infiniband/hw/cxgb4/device.c
index 9489a388376c..f4fa50a609e2 100644
--- a/drivers/infiniband/hw/cxgb4/device.c
+++ b/drivers/infiniband/hw/cxgb4/device.c
@@ -682,7 +682,10 @@ static void c4iw_dealloc(struct uld_ctx *ctx)
 	idr_destroy(&ctx->dev->hwtid_idr);
 	idr_destroy(&ctx->dev->stid_idr);
 	idr_destroy(&ctx->dev->atid_idr);
-	iounmap(ctx->dev->rdev.oc_mw_kva);
+	if (ctx->dev->rdev.bar2_kva)
+		iounmap(ctx->dev->rdev.bar2_kva);
+	if (ctx->dev->rdev.oc_mw_kva)
+		iounmap(ctx->dev->rdev.oc_mw_kva);
 	ib_dealloc_device(&ctx->dev->ibdev);
 	ctx->dev = NULL;
 }
@@ -722,11 +725,31 @@ static struct c4iw_dev *c4iw_alloc(const struct cxgb4_lld_info *infop)
 	}
 	devp->rdev.lldi = *infop;
 
-	devp->rdev.oc_mw_pa = pci_resource_start(devp->rdev.lldi.pdev, 2) +
-		(pci_resource_len(devp->rdev.lldi.pdev, 2) -
-		 roundup_pow_of_two(devp->rdev.lldi.vr->ocq.size));
-	devp->rdev.oc_mw_kva = ioremap_wc(devp->rdev.oc_mw_pa,
-					       devp->rdev.lldi.vr->ocq.size);
+	/*
+	 * For T5 devices, we map all of BAR2 with WC.
+	 * For T4 devices with onchip qp mem, we map only that part
+	 * of BAR2 with WC.
+	 */
+	devp->rdev.bar2_pa = pci_resource_start(devp->rdev.lldi.pdev, 2);
+	if (is_t5(devp->rdev.lldi.adapter_type)) {
+		devp->rdev.bar2_kva = ioremap_wc(devp->rdev.bar2_pa,
+			pci_resource_len(devp->rdev.lldi.pdev, 2));
+		if (!devp->rdev.bar2_kva) {
+			pr_err(MOD "Unable to ioremap BAR2\n");
+			return ERR_PTR(-EINVAL);
+		}
+	} else if (ocqp_supported(infop)) {
+		devp->rdev.oc_mw_pa =
+			pci_resource_start(devp->rdev.lldi.pdev, 2) +
+			pci_resource_len(devp->rdev.lldi.pdev, 2) -
+			roundup_pow_of_two(devp->rdev.lldi.vr->ocq.size);
+		devp->rdev.oc_mw_kva = ioremap_wc(devp->rdev.oc_mw_pa,
+			devp->rdev.lldi.vr->ocq.size);
+		if (!devp->rdev.oc_mw_kva) {
+			pr_err(MOD "Unable to ioremap onchip mem\n");
+			return ERR_PTR(-EINVAL);
+		}
+	}
 
 	PDBG(KERN_INFO MOD "ocq memory: "
 	       "hw_start 0x%x size %u mw_pa 0x%lx mw_kva %p\n",
@@ -1003,9 +1026,11 @@ static int enable_qp_db(int id, void *p, void *data)
 static void resume_rc_qp(struct c4iw_qp *qp)
 {
 	spin_lock(&qp->lock);
-	t4_ring_sq_db(&qp->wq, qp->wq.sq.wq_pidx_inc);
+	t4_ring_sq_db(&qp->wq, qp->wq.sq.wq_pidx_inc,
+		      is_t5(qp->rhp->rdev.lldi.adapter_type), NULL);
 	qp->wq.sq.wq_pidx_inc = 0;
-	t4_ring_rq_db(&qp->wq, qp->wq.rq.wq_pidx_inc);
+	t4_ring_rq_db(&qp->wq, qp->wq.rq.wq_pidx_inc,
+		      is_t5(qp->rhp->rdev.lldi.adapter_type), NULL);
 	qp->wq.rq.wq_pidx_inc = 0;
 	spin_unlock(&qp->lock);
 }
diff --git a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
index e872203c5424..7b8c5806a09d 100644
--- a/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
+++ b/drivers/infiniband/hw/cxgb4/iw_cxgb4.h
@@ -149,6 +149,8 @@ struct c4iw_rdev {
 	struct gen_pool *ocqp_pool;
 	u32 flags;
 	struct cxgb4_lld_info lldi;
+	unsigned long bar2_pa;
+	void __iomem *bar2_kva;
 	unsigned long oc_mw_pa;
 	void __iomem *oc_mw_kva;
 	struct c4iw_stats stats;
diff --git a/drivers/infiniband/hw/cxgb4/mem.c b/drivers/infiniband/hw/cxgb4/mem.c
index f9ca072a99ed..ec7a2988a703 100644
--- a/drivers/infiniband/hw/cxgb4/mem.c
+++ b/drivers/infiniband/hw/cxgb4/mem.c
@@ -259,8 +259,12 @@ static int write_tpt_entry(struct c4iw_rdev *rdev, u32 reset_tpt_entry,
 
 	if ((!reset_tpt_entry) && (*stag == T4_STAG_UNSET)) {
 		stag_idx = c4iw_get_resource(&rdev->resource.tpt_table);
-		if (!stag_idx)
+		if (!stag_idx) {
+			mutex_lock(&rdev->stats.lock);
+			rdev->stats.stag.fail++;
+			mutex_unlock(&rdev->stats.lock);
 			return -ENOMEM;
+		}
 		mutex_lock(&rdev->stats.lock);
 		rdev->stats.stag.cur += 32;
 		if (rdev->stats.stag.cur > rdev->stats.stag.max)
diff --git a/drivers/infiniband/hw/cxgb4/provider.c b/drivers/infiniband/hw/cxgb4/provider.c
index 79429256023a..a94a3e12c349 100644
--- a/drivers/infiniband/hw/cxgb4/provider.c
+++ b/drivers/infiniband/hw/cxgb4/provider.c
@@ -328,7 +328,7 @@ static int c4iw_query_device(struct ib_device *ibdev,
 	props->max_mr = c4iw_num_stags(&dev->rdev);
 	props->max_pd = T4_MAX_NUM_PD;
 	props->local_ca_ack_delay = 0;
-	props->max_fast_reg_page_list_len = T4_MAX_FR_DEPTH;
+	props->max_fast_reg_page_list_len = t4_max_fr_depth(use_dsgl);
 
 	return 0;
 }
diff --git a/drivers/infiniband/hw/cxgb4/qp.c b/drivers/infiniband/hw/cxgb4/qp.c
index cb76eb5eee1f..7b5114cb486f 100644
--- a/drivers/infiniband/hw/cxgb4/qp.c
+++ b/drivers/infiniband/hw/cxgb4/qp.c
@@ -212,13 +212,23 @@ static int create_qp(struct c4iw_rdev *rdev, struct t4_wq *wq,
 
 	wq->db = rdev->lldi.db_reg;
 	wq->gts = rdev->lldi.gts_reg;
-	if (user) {
-		wq->sq.udb = (u64)pci_resource_start(rdev->lldi.pdev, 2) +
-					(wq->sq.qid << rdev->qpshift);
-		wq->sq.udb &= PAGE_MASK;
-		wq->rq.udb = (u64)pci_resource_start(rdev->lldi.pdev, 2) +
-					(wq->rq.qid << rdev->qpshift);
-		wq->rq.udb &= PAGE_MASK;
+	if (user || is_t5(rdev->lldi.adapter_type)) {
+		u32 off;
+
+		off = (wq->sq.qid << rdev->qpshift) & PAGE_MASK;
+		if (user) {
+			wq->sq.udb = (u64 __iomem *)(rdev->bar2_pa + off);
+		} else {
+			off += 128 * (wq->sq.qid & rdev->qpmask) + 8;
+			wq->sq.udb = (u64 __iomem *)(rdev->bar2_kva + off);
+		}
+		off = (wq->rq.qid << rdev->qpshift) & PAGE_MASK;
+		if (user) {
+			wq->rq.udb = (u64 __iomem *)(rdev->bar2_pa + off);
+		} else {
+			off += 128 * (wq->rq.qid & rdev->qpmask) + 8;
+			wq->rq.udb = (u64 __iomem *)(rdev->bar2_kva + off);
+		}
 	}
 	wq->rdev = rdev;
 	wq->rq.msn = 1;
@@ -299,9 +309,10 @@ static int create_qp(struct c4iw_rdev *rdev, struct t4_wq *wq,
 	if (ret)
 		goto free_dma;
 
-	PDBG("%s sqid 0x%x rqid 0x%x kdb 0x%p squdb 0x%llx rqudb 0x%llx\n",
+	PDBG("%s sqid 0x%x rqid 0x%x kdb 0x%p squdb 0x%lx rqudb 0x%lx\n",
 	     __func__, wq->sq.qid, wq->rq.qid, wq->db,
-	     (unsigned long long)wq->sq.udb, (unsigned long long)wq->rq.udb);
+	     (__force unsigned long) wq->sq.udb,
+	     (__force unsigned long) wq->rq.udb);
 
 	return 0;
 free_dma:
@@ -425,6 +436,8 @@ static int build_rdma_send(struct t4_sq *sq, union t4_wr *wqe,
 	default:
 		return -EINVAL;
 	}
+	wqe->send.r3 = 0;
+	wqe->send.r4 = 0;
 
 	plen = 0;
 	if (wr->num_sge) {
@@ -555,7 +568,8 @@ static int build_fastreg(struct t4_sq *sq, union t4_wr *wqe,
 	int pbllen = roundup(wr->wr.fast_reg.page_list_len * sizeof(u64), 32);
 	int rem;
 
-	if (wr->wr.fast_reg.page_list_len > T4_MAX_FR_DEPTH)
+	if (wr->wr.fast_reg.page_list_len >
+	    t4_max_fr_depth(use_dsgl))
 		return -EINVAL;
 
 	wqe->fr.qpbinde_to_dcacpu = 0;
@@ -650,9 +664,10 @@ static int ring_kernel_sq_db(struct c4iw_qp *qhp, u16 inc)
 
 	spin_lock_irqsave(&qhp->rhp->lock, flags);
 	spin_lock(&qhp->lock);
-	if (qhp->rhp->db_state == NORMAL) {
-		t4_ring_sq_db(&qhp->wq, inc);
-	} else {
+	if (qhp->rhp->db_state == NORMAL)
+		t4_ring_sq_db(&qhp->wq, inc,
+			      is_t5(qhp->rhp->rdev.lldi.adapter_type), NULL);
+	else {
 		add_to_fc_list(&qhp->rhp->db_fc_list, &qhp->db_fc_entry);
 		qhp->wq.sq.wq_pidx_inc += inc;
 	}
@@ -667,9 +682,10 @@ static int ring_kernel_rq_db(struct c4iw_qp *qhp, u16 inc)
 
 	spin_lock_irqsave(&qhp->rhp->lock, flags);
 	spin_lock(&qhp->lock);
-	if (qhp->rhp->db_state == NORMAL) {
-		t4_ring_rq_db(&qhp->wq, inc);
-	} else {
+	if (qhp->rhp->db_state == NORMAL)
+		t4_ring_rq_db(&qhp->wq, inc,
+			      is_t5(qhp->rhp->rdev.lldi.adapter_type), NULL);
+	else {
 		add_to_fc_list(&qhp->rhp->db_fc_list, &qhp->db_fc_entry);
 		qhp->wq.rq.wq_pidx_inc += inc;
 	}
@@ -686,7 +702,7 @@ int c4iw_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 	enum fw_wr_opcodes fw_opcode = 0;
 	enum fw_ri_wr_flags fw_flags;
 	struct c4iw_qp *qhp;
-	union t4_wr *wqe;
+	union t4_wr *wqe = NULL;
 	u32 num_wrs;
 	struct t4_swsqe *swsqe;
 	unsigned long flag;
@@ -792,7 +808,8 @@ int c4iw_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr,
 		idx += DIV_ROUND_UP(len16*16, T4_EQ_ENTRY_SIZE);
 	}
 	if (!qhp->rhp->rdev.status_page->db_off) {
-		t4_ring_sq_db(&qhp->wq, idx);
+		t4_ring_sq_db(&qhp->wq, idx,
+			      is_t5(qhp->rhp->rdev.lldi.adapter_type), wqe);
 		spin_unlock_irqrestore(&qhp->lock, flag);
 	} else {
 		spin_unlock_irqrestore(&qhp->lock, flag);
@@ -806,7 +823,7 @@ int c4iw_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
 {
 	int err = 0;
 	struct c4iw_qp *qhp;
-	union t4_recv_wr *wqe;
+	union t4_recv_wr *wqe = NULL;
 	u32 num_wrs;
 	u8 len16 = 0;
 	unsigned long flag;
@@ -858,7 +875,8 @@ int c4iw_post_receive(struct ib_qp *ibqp, struct ib_recv_wr *wr,
 		num_wrs--;
 	}
 	if (!qhp->rhp->rdev.status_page->db_off) {
-		t4_ring_rq_db(&qhp->wq, idx);
+		t4_ring_rq_db(&qhp->wq, idx,
+			      is_t5(qhp->rhp->rdev.lldi.adapter_type), wqe);
 		spin_unlock_irqrestore(&qhp->lock, flag);
 	} else {
 		spin_unlock_irqrestore(&qhp->lock, flag);
@@ -1352,6 +1370,7 @@ int c4iw_modify_qp(struct c4iw_dev *rhp, struct c4iw_qp *qhp,
 		switch (attrs->next_state) {
 		case C4IW_QP_STATE_CLOSING:
 			BUG_ON(atomic_read(&qhp->ep->com.kref.refcount) < 2);
+			t4_set_wq_in_error(&qhp->wq);
 			set_state(qhp, C4IW_QP_STATE_CLOSING);
 			ep = qhp->ep;
 			if (!internal) {
@@ -1359,18 +1378,18 @@ int c4iw_modify_qp(struct c4iw_dev *rhp, struct c4iw_qp *qhp,
 				disconnect = 1;
 				c4iw_get_ep(&qhp->ep->com);
 			}
-			t4_set_wq_in_error(&qhp->wq);
 			ret = rdma_fini(rhp, qhp, ep);
 			if (ret)
 				goto err;
 			break;
 		case C4IW_QP_STATE_TERMINATE:
+			t4_set_wq_in_error(&qhp->wq);
 			set_state(qhp, C4IW_QP_STATE_TERMINATE);
 			qhp->attr.layer_etype = attrs->layer_etype;
 			qhp->attr.ecode = attrs->ecode;
-			t4_set_wq_in_error(&qhp->wq);
 			ep = qhp->ep;
 			disconnect = 1;
+			c4iw_get_ep(&qhp->ep->com);
 			if (!internal)
 				terminate = 1;
 			else {
@@ -1378,11 +1397,10 @@ int c4iw_modify_qp(struct c4iw_dev *rhp, struct c4iw_qp *qhp,
 				if (ret)
 					goto err;
 			}
-			c4iw_get_ep(&qhp->ep->com);
 			break;
 		case C4IW_QP_STATE_ERROR:
-			set_state(qhp, C4IW_QP_STATE_ERROR);
 			t4_set_wq_in_error(&qhp->wq);
+			set_state(qhp, C4IW_QP_STATE_ERROR);
 			if (!internal) {
 				abort = 1;
 				disconnect = 1;
@@ -1677,11 +1695,11 @@ struct ib_qp *c4iw_create_qp(struct ib_pd *pd, struct ib_qp_init_attr *attrs,
 		mm2->len = PAGE_ALIGN(qhp->wq.rq.memsize);
 		insert_mmap(ucontext, mm2);
 		mm3->key = uresp.sq_db_gts_key;
-		mm3->addr = qhp->wq.sq.udb;
+		mm3->addr = (__force unsigned long) qhp->wq.sq.udb;
 		mm3->len = PAGE_SIZE;
 		insert_mmap(ucontext, mm3);
 		mm4->key = uresp.rq_db_gts_key;
-		mm4->addr = qhp->wq.rq.udb;
+		mm4->addr = (__force unsigned long) qhp->wq.rq.udb;
 		mm4->len = PAGE_SIZE;
 		insert_mmap(ucontext, mm4);
 		if (mm5) {
diff --git a/drivers/infiniband/hw/cxgb4/resource.c b/drivers/infiniband/hw/cxgb4/resource.c
index cdef4d7fb6d8..67df71a7012e 100644
--- a/drivers/infiniband/hw/cxgb4/resource.c
+++ b/drivers/infiniband/hw/cxgb4/resource.c
@@ -179,8 +179,12 @@ u32 c4iw_get_qpid(struct c4iw_rdev *rdev, struct c4iw_dev_ucontext *uctx)
 		kfree(entry);
 	} else {
 		qid = c4iw_get_resource(&rdev->resource.qid_table);
-		if (!qid)
+		if (!qid) {
+			mutex_lock(&rdev->stats.lock);
+			rdev->stats.qid.fail++;
+			mutex_unlock(&rdev->stats.lock);
 			goto out;
+		}
 		mutex_lock(&rdev->stats.lock);
 		rdev->stats.qid.cur += rdev->qpmask + 1;
 		mutex_unlock(&rdev->stats.lock);
@@ -322,8 +326,8 @@ u32 c4iw_rqtpool_alloc(struct c4iw_rdev *rdev, int size)
 	unsigned long addr = gen_pool_alloc(rdev->rqt_pool, size << 6);
 	PDBG("%s addr 0x%x size %d\n", __func__, (u32)addr, size << 6);
 	if (!addr)
-		printk_ratelimited(KERN_WARNING MOD "%s: Out of RQT memory\n",
-		       pci_name(rdev->lldi.pdev));
+		pr_warn_ratelimited(MOD "%s: Out of RQT memory\n",
+				    pci_name(rdev->lldi.pdev));
 	mutex_lock(&rdev->stats.lock);
 	if (addr) {
 		rdev->stats.rqt.cur += roundup(size << 6, 1 << MIN_RQT_SHIFT);
diff --git a/drivers/infiniband/hw/cxgb4/t4.h b/drivers/infiniband/hw/cxgb4/t4.h
index eeca8b1e6376..2178f3198410 100644
--- a/drivers/infiniband/hw/cxgb4/t4.h
+++ b/drivers/infiniband/hw/cxgb4/t4.h
@@ -84,7 +84,14 @@ struct t4_status_page {
 			sizeof(struct fw_ri_isgl)) / sizeof(struct fw_ri_sge))
 #define T4_MAX_FR_IMMD ((T4_SQ_NUM_BYTES - sizeof(struct fw_ri_fr_nsmr_wr) - \
 			sizeof(struct fw_ri_immd)) & ~31UL)
-#define T4_MAX_FR_DEPTH (1024 / sizeof(u64))
+#define T4_MAX_FR_IMMD_DEPTH (T4_MAX_FR_IMMD / sizeof(u64))
+#define T4_MAX_FR_DSGL 1024
+#define T4_MAX_FR_DSGL_DEPTH (T4_MAX_FR_DSGL / sizeof(u64))
+
+static inline int t4_max_fr_depth(int use_dsgl)
+{
+	return use_dsgl ? T4_MAX_FR_DSGL_DEPTH : T4_MAX_FR_IMMD_DEPTH;
+}
 
 #define T4_RQ_NUM_SLOTS 2
 #define T4_RQ_NUM_BYTES (T4_EQ_ENTRY_SIZE * T4_RQ_NUM_SLOTS)
@@ -292,7 +299,7 @@ struct t4_sq {
 	unsigned long phys_addr;
 	struct t4_swsqe *sw_sq;
 	struct t4_swsqe *oldest_read;
-	u64 udb;
+	u64 __iomem *udb;
 	size_t memsize;
 	u32 qid;
 	u16 in_use;
@@ -314,7 +321,7 @@ struct t4_rq {
 	dma_addr_t dma_addr;
 	DEFINE_DMA_UNMAP_ADDR(mapping);
 	struct t4_swrqe *sw_rq;
-	u64 udb;
+	u64 __iomem *udb;
 	size_t memsize;
 	u32 qid;
 	u32 msn;
@@ -435,15 +442,67 @@ static inline u16 t4_sq_wq_size(struct t4_wq *wq)
 		return wq->sq.size * T4_SQ_NUM_SLOTS;
 }
 
-static inline void t4_ring_sq_db(struct t4_wq *wq, u16 inc)
+/* This function copies 64 byte coalesced work request to memory
+ * mapped BAR2 space. For coalesced WRs, the SGE fetches data
+ * from the FIFO instead of from Host.
+ */
+static inline void pio_copy(u64 __iomem *dst, u64 *src)
+{
+	int count = 8;
+
+	while (count) {
+		writeq(*src, dst);
+		src++;
+		dst++;
+		count--;
+	}
+}
+
+static inline void t4_ring_sq_db(struct t4_wq *wq, u16 inc, u8 t5,
+				 union t4_wr *wqe)
 {
+
+	/* Flush host queue memory writes. */
 	wmb();
+	if (t5) {
+		if (inc == 1 && wqe) {
+			PDBG("%s: WC wq->sq.pidx = %d\n",
+			     __func__, wq->sq.pidx);
+			pio_copy(wq->sq.udb + 7, (void *)wqe);
+		} else {
+			PDBG("%s: DB wq->sq.pidx = %d\n",
+			     __func__, wq->sq.pidx);
+			writel(PIDX_T5(inc), wq->sq.udb);
+		}
+
+		/* Flush user doorbell area writes. */
+		wmb();
+		return;
+	}
 	writel(QID(wq->sq.qid) | PIDX(inc), wq->db);
 }
 
-static inline void t4_ring_rq_db(struct t4_wq *wq, u16 inc)
+static inline void t4_ring_rq_db(struct t4_wq *wq, u16 inc, u8 t5,
+				 union t4_recv_wr *wqe)
 {
+
+	/* Flush host queue memory writes. */
 	wmb();
+	if (t5) {
+		if (inc == 1 && wqe) {
+			PDBG("%s: WC wq->rq.pidx = %d\n",
+			     __func__, wq->rq.pidx);
+			pio_copy(wq->rq.udb + 7, (void *)wqe);
+		} else {
+			PDBG("%s: DB wq->rq.pidx = %d\n",
+			     __func__, wq->rq.pidx);
+			writel(PIDX_T5(inc), wq->rq.udb);
+		}
+
+		/* Flush user doorbell area writes. */
+		wmb();
+		return;
+	}
 	writel(QID(wq->rq.qid) | PIDX(inc), wq->db);
 }
 
@@ -568,6 +627,9 @@ static inline int t4_next_hw_cqe(struct t4_cq *cq, struct t4_cqe **cqe)
 		printk(KERN_ERR MOD "cq overflow cqid %u\n", cq->cqid);
 		BUG_ON(1);
 	} else if (t4_valid_cqe(cq, &cq->queue[cq->cidx])) {
+
+		/* Ensure CQE is flushed to memory */
+		rmb();
 		*cqe = &cq->queue[cq->cidx];
 		ret = 0;
 	} else
diff --git a/drivers/infiniband/hw/mlx5/main.c b/drivers/infiniband/hw/mlx5/main.c
index fa6dc870adae..364d4b6937f5 100644
--- a/drivers/infiniband/hw/mlx5/main.c
+++ b/drivers/infiniband/hw/mlx5/main.c
@@ -282,6 +282,8 @@ static int mlx5_ib_query_device(struct ib_device *ibdev,
 		props->sig_guard_cap = IB_GUARD_T10DIF_CRC |
 				       IB_GUARD_T10DIF_CSUM;
 	}
+	if (flags & MLX5_DEV_CAP_FLAG_BLOCK_MCAST)
+		props->device_cap_flags |= IB_DEVICE_BLOCK_MULTICAST_LOOPBACK;
 
 	props->vendor_id	   = be32_to_cpup((__be32 *)(out_mad->data + 36)) &
 		0xffffff;
diff --git a/drivers/infiniband/hw/mlx5/qp.c b/drivers/infiniband/hw/mlx5/qp.c
index ae788d27b93f..dc930ed21eca 100644
--- a/drivers/infiniband/hw/mlx5/qp.c
+++ b/drivers/infiniband/hw/mlx5/qp.c
@@ -807,6 +807,15 @@ static int create_qp_common(struct mlx5_ib_dev *dev, struct ib_pd *pd,
 	spin_lock_init(&qp->sq.lock);
 	spin_lock_init(&qp->rq.lock);
 
+	if (init_attr->create_flags & IB_QP_CREATE_BLOCK_MULTICAST_LOOPBACK) {
+		if (!(dev->mdev.caps.flags & MLX5_DEV_CAP_FLAG_BLOCK_MCAST)) {
+			mlx5_ib_dbg(dev, "block multicast loopback isn't supported\n");
+			return -EINVAL;
+		} else {
+			qp->flags |= MLX5_IB_QP_BLOCK_MULTICAST_LOOPBACK;
+		}
+	}
+
 	if (init_attr->sq_sig_type == IB_SIGNAL_ALL_WR)
 		qp->sq_signal_bits = MLX5_WQE_CTRL_CQ_UPDATE;
 
@@ -878,6 +887,9 @@ static int create_qp_common(struct mlx5_ib_dev *dev, struct ib_pd *pd,
 	if (qp->wq_sig)
 		in->ctx.flags_pd |= cpu_to_be32(MLX5_QP_ENABLE_SIG);
 
+	if (qp->flags & MLX5_IB_QP_BLOCK_MULTICAST_LOOPBACK)
+		in->ctx.flags_pd |= cpu_to_be32(MLX5_QP_BLOCK_MCAST);
+
 	if (qp->scat_cqe && is_connected(init_attr->qp_type)) {
 		int rcqe_sz;
 		int scqe_sz;
diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c
index 87897b95666d..ded76c101dde 100644
--- a/drivers/infiniband/hw/mthca/mthca_main.c
+++ b/drivers/infiniband/hw/mthca/mthca_main.c
@@ -858,13 +858,9 @@ static int mthca_enable_msi_x(struct mthca_dev *mdev)
 	entries[1].entry = 1;
 	entries[2].entry = 2;
 
-	err = pci_enable_msix(mdev->pdev, entries, ARRAY_SIZE(entries));
-	if (err) {
-		if (err > 0)
-			mthca_info(mdev, "Only %d MSI-X vectors available, "
-				   "not using MSI-X\n", err);
+	err = pci_enable_msix_exact(mdev->pdev, entries, ARRAY_SIZE(entries));
+	if (err)
 		return err;
-	}
 
 	mdev->eq_table.eq[MTHCA_EQ_COMP ].msi_x_vector = entries[0].vector;
 	mdev->eq_table.eq[MTHCA_EQ_ASYNC].msi_x_vector = entries[1].vector;
diff --git a/drivers/infiniband/hw/qib/qib_pcie.c b/drivers/infiniband/hw/qib/qib_pcie.c
index c8d9c4ab142b..61a0046efb76 100644
--- a/drivers/infiniband/hw/qib/qib_pcie.c
+++ b/drivers/infiniband/hw/qib/qib_pcie.c
@@ -197,46 +197,47 @@ static void qib_msix_setup(struct qib_devdata *dd, int pos, u32 *msixcnt,
 			   struct qib_msix_entry *qib_msix_entry)
 {
 	int ret;
-	u32 tabsize = 0;
-	u16 msix_flags;
+	int nvec = *msixcnt;
 	struct msix_entry *msix_entry;
 	int i;
 
+	ret = pci_msix_vec_count(dd->pcidev);
+	if (ret < 0)
+		goto do_intx;
+
+	nvec = min(nvec, ret);
+
 	/* We can't pass qib_msix_entry array to qib_msix_setup
 	 * so use a dummy msix_entry array and copy the allocated
 	 * irq back to the qib_msix_entry array. */
-	msix_entry = kmalloc(*msixcnt * sizeof(*msix_entry), GFP_KERNEL);
-	if (!msix_entry) {
-		ret = -ENOMEM;
+	msix_entry = kmalloc(nvec * sizeof(*msix_entry), GFP_KERNEL);
+	if (!msix_entry)
 		goto do_intx;
-	}
-	for (i = 0; i < *msixcnt; i++)
+
+	for (i = 0; i < nvec; i++)
 		msix_entry[i] = qib_msix_entry[i].msix;
 
-	pci_read_config_word(dd->pcidev, pos + PCI_MSIX_FLAGS, &msix_flags);
-	tabsize = 1 + (msix_flags & PCI_MSIX_FLAGS_QSIZE);
-	if (tabsize > *msixcnt)
-		tabsize = *msixcnt;
-	ret = pci_enable_msix(dd->pcidev, msix_entry, tabsize);
-	if (ret > 0) {
-		tabsize = ret;
-		ret = pci_enable_msix(dd->pcidev, msix_entry, tabsize);
-	}
-do_intx:
-	if (ret) {
-		qib_dev_err(dd,
-			"pci_enable_msix %d vectors failed: %d, falling back to INTx\n",
-			tabsize, ret);
-		tabsize = 0;
-	}
-	for (i = 0; i < tabsize; i++)
+	ret = pci_enable_msix_range(dd->pcidev, msix_entry, 1, nvec);
+	if (ret < 0)
+		goto free_msix_entry;
+	else
+		nvec = ret;
+
+	for (i = 0; i < nvec; i++)
 		qib_msix_entry[i].msix = msix_entry[i];
+
 	kfree(msix_entry);
-	*msixcnt = tabsize;
+	*msixcnt = nvec;
+	return;
 
-	if (ret)
-		qib_enable_intx(dd->pcidev);
+free_msix_entry:
+	kfree(msix_entry);
 
+do_intx:
+	qib_dev_err(dd, "pci_enable_msix_range %d vectors failed: %d, "
+			"falling back to INTx\n", nvec, ret);
+	*msixcnt = 0;
+	qib_enable_intx(dd->pcidev);
 }
 
 /**
diff --git a/drivers/irqchip/irq-vic.c b/drivers/irqchip/irq-vic.c
index 37dab0b472cd..7d35287f9e90 100644
--- a/drivers/irqchip/irq-vic.c
+++ b/drivers/irqchip/irq-vic.c
@@ -24,6 +24,7 @@
 #include <linux/list.h>
 #include <linux/io.h>
 #include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
 #include <linux/irqdomain.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -228,12 +229,17 @@ static int handle_one_vic(struct vic_device *vic, struct pt_regs *regs)
 static void vic_handle_irq_cascaded(unsigned int irq, struct irq_desc *desc)
 {
 	u32 stat, hwirq;
+	struct irq_chip *host_chip = irq_desc_get_chip(desc);
 	struct vic_device *vic = irq_desc_get_handler_data(desc);
 
+	chained_irq_enter(host_chip, desc);
+
 	while ((stat = readl_relaxed(vic->base + VIC_IRQ_STATUS))) {
 		hwirq = ffs(stat) - 1;
 		generic_handle_irq(irq_find_mapping(vic->domain, hwirq));
 	}
+
+	chained_irq_exit(host_chip, desc);
 }
 
 /*
diff --git a/drivers/irqchip/spear-shirq.c b/drivers/irqchip/spear-shirq.c
index 8527743b5cef..3fdda3a40269 100644
--- a/drivers/irqchip/spear-shirq.c
+++ b/drivers/irqchip/spear-shirq.c
@@ -5,7 +5,7 @@
  * Viresh Kumar <viresh.linux@gmail.com>
  *
  * Copyright (C) 2012 ST Microelectronics
- * Shiraz Hashim <shiraz.hashim@st.com>
+ * Shiraz Hashim <shiraz.linux.kernel@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c
index 25247a852912..ad1b9bea446e 100644
--- a/drivers/md/raid5.c
+++ b/drivers/md/raid5.c
@@ -4370,8 +4370,7 @@ static struct stripe_head *__get_priority_stripe(struct r5conf *conf, int group)
 		sh->group = NULL;
 	}
 	list_del_init(&sh->lru);
-	atomic_inc(&sh->count);
-	BUG_ON(atomic_read(&sh->count) != 1);
+	BUG_ON(atomic_inc_return(&sh->count) != 1);
 	return sh;
 }
 
diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c
index 363da96e6891..c4176b0f382d 100644
--- a/drivers/mtd/devices/spear_smi.c
+++ b/drivers/mtd/devices/spear_smi.c
@@ -6,7 +6,7 @@
  *
  * Copyright © 2010 STMicroelectronics.
  * Ashish Priyadarshi
- * Shiraz Hashim <shiraz.hashim@st.com>
+ * Shiraz Hashim <shiraz.linux.kernel@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -1089,5 +1089,5 @@ static struct platform_driver spear_smi_driver = {
 module_platform_driver(spear_smi_driver);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Ashish Priyadarshi, Shiraz Hashim <shiraz.hashim@st.com>");
+MODULE_AUTHOR("Ashish Priyadarshi, Shiraz Hashim <shiraz.linux.kernel@gmail.com>");
 MODULE_DESCRIPTION("MTD SMI driver for serial nor flash chips");
diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index a8efb18e42fa..0ab83708b6a1 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -8627,6 +8627,7 @@ bnx2_remove_one(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 }
 
+#ifdef CONFIG_PM_SLEEP
 static int
 bnx2_suspend(struct device *device)
 {
@@ -8665,7 +8666,6 @@ bnx2_resume(struct device *device)
 	return 0;
 }
 
-#ifdef CONFIG_PM_SLEEP
 static SIMPLE_DEV_PM_OPS(bnx2_pm_ops, bnx2_suspend, bnx2_resume);
 #define BNX2_PM_OPS (&bnx2_pm_ops)
 
diff --git a/drivers/net/ethernet/cadence/Kconfig b/drivers/net/ethernet/cadence/Kconfig
index 751d5c7b312d..7e49c43b7af3 100644
--- a/drivers/net/ethernet/cadence/Kconfig
+++ b/drivers/net/ethernet/cadence/Kconfig
@@ -4,7 +4,7 @@
 
 config NET_CADENCE
 	bool "Cadence devices"
-	depends on HAS_IOMEM
+	depends on HAS_IOMEM && (ARM || AVR32 || COMPILE_TEST)
 	default y
 	---help---
 	  If you have a network (Ethernet) card belonging to this class, say Y.
@@ -22,7 +22,7 @@ if NET_CADENCE
 
 config ARM_AT91_ETHER
 	tristate "AT91RM9200 Ethernet support"
-	depends on HAS_DMA
+	depends on HAS_DMA && (ARCH_AT91RM9200 || COMPILE_TEST)
 	select MACB
 	---help---
 	  If you wish to compile a kernel for the AT91RM9200 and enable
@@ -30,7 +30,7 @@ config ARM_AT91_ETHER
 
 config MACB
 	tristate "Cadence MACB/GEM support"
-	depends on HAS_DMA
+	depends on HAS_DMA && (PLATFORM_AT32AP || ARCH_AT91 || ARCH_PICOXCELL || ARCH_ZYNQ || COMPILE_TEST)
 	select PHYLIB
 	---help---
 	  The Cadence MACB ethernet interface is found on many Atmel AT32 and
diff --git a/drivers/net/ethernet/chelsio/cxgb4/l2t.c b/drivers/net/ethernet/chelsio/cxgb4/l2t.c
index 81e8402a74b4..8a96572fdde0 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/l2t.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/l2t.c
@@ -154,7 +154,7 @@ static int write_l2e(struct adapter *adap, struct l2t_entry *e, int sync)
 	req->params = htons(L2T_W_PORT(e->lport) | L2T_W_NOREPLY(!sync));
 	req->l2t_idx = htons(e->idx);
 	req->vlan = htons(e->vlan);
-	if (e->neigh)
+	if (e->neigh && !(e->neigh->dev->flags & IFF_LOOPBACK))
 		memcpy(e->dmac, e->neigh->ha, sizeof(e->dmac));
 	memcpy(req->dst_mac, e->dmac, sizeof(req->dst_mac));
 
@@ -394,6 +394,8 @@ struct l2t_entry *cxgb4_l2t_get(struct l2t_data *d, struct neighbour *neigh,
 	if (e) {
 		spin_lock(&e->lock);          /* avoid race with t4_l2t_free */
 		e->state = L2T_STATE_RESOLVING;
+		if (neigh->dev->flags & IFF_LOOPBACK)
+			memcpy(e->dmac, physdev->dev_addr, sizeof(e->dmac));
 		memcpy(e->addr, addr, addr_len);
 		e->ifindex = ifidx;
 		e->hash = hash;
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index fb2fe65903c2..bba67681aeaa 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -682,7 +682,7 @@ enum {
 	SF_RD_ID        = 0x9f,       /* read ID */
 	SF_ERASE_SECTOR = 0xd8,       /* erase sector */
 
-	FW_MAX_SIZE = 512 * 1024,
+	FW_MAX_SIZE = 16 * SF_SEC_SIZE,
 };
 
 /**
diff --git a/drivers/net/ethernet/emulex/benet/be.h b/drivers/net/ethernet/emulex/benet/be.h
index 8ccaa2520dc3..97db5a7179df 100644
--- a/drivers/net/ethernet/emulex/benet/be.h
+++ b/drivers/net/ethernet/emulex/benet/be.h
@@ -374,6 +374,7 @@ enum vf_state {
 #define BE_FLAGS_NAPI_ENABLED			(1 << 9)
 #define BE_FLAGS_QNQ_ASYNC_EVT_RCVD		(1 << 11)
 #define BE_FLAGS_VXLAN_OFFLOADS			(1 << 12)
+#define BE_FLAGS_SETUP_DONE			(1 << 13)
 
 #define BE_UC_PMAC_COUNT			30
 #define BE_VF_UC_PMAC_COUNT			2
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 3e6df47b6973..a18645407d21 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -2033,11 +2033,13 @@ static void be_tx_compl_clean(struct be_adapter *adapter)
 	bool dummy_wrb;
 	int i, pending_txqs;
 
-	/* Wait for a max of 200ms for all the tx-completions to arrive. */
+	/* Stop polling for compls when HW has been silent for 10ms */
 	do {
 		pending_txqs = adapter->num_tx_qs;
 
 		for_all_tx_queues(adapter, txo, i) {
+			cmpl = 0;
+			num_wrbs = 0;
 			txq = &txo->q;
 			while ((txcp = be_tx_compl_get(&txo->cq))) {
 				end_idx =
@@ -2050,14 +2052,13 @@ static void be_tx_compl_clean(struct be_adapter *adapter)
 			if (cmpl) {
 				be_cq_notify(adapter, txo->cq.id, false, cmpl);
 				atomic_sub(num_wrbs, &txq->used);
-				cmpl = 0;
-				num_wrbs = 0;
+				timeo = 0;
 			}
 			if (atomic_read(&txq->used) == 0)
 				pending_txqs--;
 		}
 
-		if (pending_txqs == 0 || ++timeo > 200)
+		if (pending_txqs == 0 || ++timeo > 10 || be_hw_error(adapter))
 			break;
 
 		mdelay(1);
@@ -2725,6 +2726,12 @@ static int be_close(struct net_device *netdev)
 	struct be_eq_obj *eqo;
 	int i;
 
+	/* This protection is needed as be_close() may be called even when the
+	 * adapter is in cleared state (after eeh perm failure)
+	 */
+	if (!(adapter->flags & BE_FLAGS_SETUP_DONE))
+		return 0;
+
 	be_roce_dev_close(adapter);
 
 	if (adapter->flags & BE_FLAGS_NAPI_ENABLED) {
@@ -3055,6 +3062,7 @@ static int be_clear(struct be_adapter *adapter)
 	be_clear_queues(adapter);
 
 	be_msix_disable(adapter);
+	adapter->flags &= ~BE_FLAGS_SETUP_DONE;
 	return 0;
 }
 
@@ -3559,6 +3567,7 @@ static int be_setup(struct be_adapter *adapter)
 		adapter->phy.fc_autoneg = 1;
 
 	be_schedule_worker(adapter);
+	adapter->flags |= BE_FLAGS_SETUP_DONE;
 	return 0;
 err:
 	be_clear(adapter);
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index d04b1c3c9b85..b248bcbdae63 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -89,9 +89,8 @@
 #define      MVNETA_TX_IN_PRGRS                  BIT(1)
 #define      MVNETA_TX_FIFO_EMPTY                BIT(8)
 #define MVNETA_RX_MIN_FRAME_SIZE                 0x247c
-#define MVNETA_SERDES_CFG			 0x24A0
+#define MVNETA_SGMII_SERDES_CFG			 0x24A0
 #define      MVNETA_SGMII_SERDES_PROTO		 0x0cc7
-#define      MVNETA_RGMII_SERDES_PROTO		 0x0667
 #define MVNETA_TYPE_PRIO                         0x24bc
 #define      MVNETA_FORCE_UNI                    BIT(21)
 #define MVNETA_TXQ_CMD_1                         0x24e4
@@ -712,6 +711,35 @@ static void mvneta_rxq_bm_disable(struct mvneta_port *pp,
 	mvreg_write(pp, MVNETA_RXQ_CONFIG_REG(rxq->id), val);
 }
 
+
+
+/* Sets the RGMII Enable bit (RGMIIEn) in port MAC control register */
+static void mvneta_gmac_rgmii_set(struct mvneta_port *pp, int enable)
+{
+	u32  val;
+
+	val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
+
+	if (enable)
+		val |= MVNETA_GMAC2_PORT_RGMII;
+	else
+		val &= ~MVNETA_GMAC2_PORT_RGMII;
+
+	mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
+}
+
+/* Config SGMII port */
+static void mvneta_port_sgmii_config(struct mvneta_port *pp)
+{
+	u32 val;
+
+	val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
+	val |= MVNETA_GMAC2_PCS_ENABLE;
+	mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
+
+	mvreg_write(pp, MVNETA_SGMII_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
+}
+
 /* Start the Ethernet port RX and TX activity */
 static void mvneta_port_up(struct mvneta_port *pp)
 {
@@ -2729,15 +2757,12 @@ static void mvneta_port_power_up(struct mvneta_port *pp, int phy_mode)
 	mvreg_write(pp, MVNETA_UNIT_INTR_CAUSE, 0);
 
 	if (phy_mode == PHY_INTERFACE_MODE_SGMII)
-		mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_SGMII_SERDES_PROTO);
-	else
-		mvreg_write(pp, MVNETA_SERDES_CFG, MVNETA_RGMII_SERDES_PROTO);
+		mvneta_port_sgmii_config(pp);
 
-	val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
-
-	val |= MVNETA_GMAC2_PCS_ENABLE | MVNETA_GMAC2_PORT_RGMII;
+	mvneta_gmac_rgmii_set(pp, 1);
 
 	/* Cancel Port Reset */
+	val = mvreg_read(pp, MVNETA_GMAC_CTRL_2);
 	val &= ~MVNETA_GMAC2_PORT_RESET;
 	mvreg_write(pp, MVNETA_GMAC_CTRL_2, val);
 
diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c
index f0ae95f66ceb..cef267e24f9c 100644
--- a/drivers/net/ethernet/mellanox/mlx4/main.c
+++ b/drivers/net/ethernet/mellanox/mlx4/main.c
@@ -2301,13 +2301,8 @@ static int __mlx4_init_one(struct pci_dev *pdev, int pci_dev_data)
 	/* Allow large DMA segments, up to the firmware limit of 1 GB */
 	dma_set_max_seg_size(&pdev->dev, 1024 * 1024 * 1024);
 
-	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-	if (!priv) {
-		err = -ENOMEM;
-		goto err_release_regions;
-	}
-
-	dev       = &priv->dev;
+	dev       = pci_get_drvdata(pdev);
+	priv      = mlx4_priv(dev);
 	dev->pdev = pdev;
 	INIT_LIST_HEAD(&priv->ctx_list);
 	spin_lock_init(&priv->ctx_lock);
@@ -2374,10 +2369,10 @@ static int __mlx4_init_one(struct pci_dev *pdev, int pci_dev_data)
 			} else {
 				atomic_inc(&pf_loading);
 				err = pci_enable_sriov(pdev, total_vfs);
-				atomic_dec(&pf_loading);
 				if (err) {
 					mlx4_err(dev, "Failed to enable SR-IOV, continuing without SR-IOV (err = %d).\n",
 						 err);
+					atomic_dec(&pf_loading);
 					err = 0;
 				} else {
 					mlx4_warn(dev, "Running in master mode\n");
@@ -2535,8 +2530,10 @@ slave_start:
 	mlx4_sense_init(dev);
 	mlx4_start_sense(dev);
 
-	priv->pci_dev_data = pci_dev_data;
-	pci_set_drvdata(pdev, dev);
+	priv->removed = 0;
+
+	if (mlx4_is_master(dev) && dev->num_vfs)
+		atomic_dec(&pf_loading);
 
 	return 0;
 
@@ -2588,6 +2585,9 @@ err_rel_own:
 	if (!mlx4_is_slave(dev))
 		mlx4_free_ownership(dev);
 
+	if (mlx4_is_master(dev) && dev->num_vfs)
+		atomic_dec(&pf_loading);
+
 	kfree(priv->dev.dev_vfs);
 
 err_free_dev:
@@ -2604,85 +2604,110 @@ err_disable_pdev:
 
 static int mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
+	struct mlx4_priv *priv;
+	struct mlx4_dev *dev;
+
 	printk_once(KERN_INFO "%s", mlx4_version);
 
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dev       = &priv->dev;
+	pci_set_drvdata(pdev, dev);
+	priv->pci_dev_data = id->driver_data;
+
 	return __mlx4_init_one(pdev, id->driver_data);
 }
 
-static void mlx4_remove_one(struct pci_dev *pdev)
+static void __mlx4_remove_one(struct pci_dev *pdev)
 {
 	struct mlx4_dev  *dev  = pci_get_drvdata(pdev);
 	struct mlx4_priv *priv = mlx4_priv(dev);
+	int               pci_dev_data;
 	int p;
 
-	if (dev) {
-		/* in SRIOV it is not allowed to unload the pf's
-		 * driver while there are alive vf's */
-		if (mlx4_is_master(dev)) {
-			if (mlx4_how_many_lives_vf(dev))
-				printk(KERN_ERR "Removing PF when there are assigned VF's !!!\n");
-		}
-		mlx4_stop_sense(dev);
-		mlx4_unregister_device(dev);
+	if (priv->removed)
+		return;
 
-		for (p = 1; p <= dev->caps.num_ports; p++) {
-			mlx4_cleanup_port_info(&priv->port[p]);
-			mlx4_CLOSE_PORT(dev, p);
-		}
+	pci_dev_data = priv->pci_dev_data;
 
-		if (mlx4_is_master(dev))
-			mlx4_free_resource_tracker(dev,
-						   RES_TR_FREE_SLAVES_ONLY);
-
-		mlx4_cleanup_counters_table(dev);
-		mlx4_cleanup_qp_table(dev);
-		mlx4_cleanup_srq_table(dev);
-		mlx4_cleanup_cq_table(dev);
-		mlx4_cmd_use_polling(dev);
-		mlx4_cleanup_eq_table(dev);
-		mlx4_cleanup_mcg_table(dev);
-		mlx4_cleanup_mr_table(dev);
-		mlx4_cleanup_xrcd_table(dev);
-		mlx4_cleanup_pd_table(dev);
+	/* in SRIOV it is not allowed to unload the pf's
+	 * driver while there are alive vf's */
+	if (mlx4_is_master(dev) && mlx4_how_many_lives_vf(dev))
+		printk(KERN_ERR "Removing PF when there are assigned VF's !!!\n");
+	mlx4_stop_sense(dev);
+	mlx4_unregister_device(dev);
 
-		if (mlx4_is_master(dev))
-			mlx4_free_resource_tracker(dev,
-						   RES_TR_FREE_STRUCTS_ONLY);
-
-		iounmap(priv->kar);
-		mlx4_uar_free(dev, &priv->driver_uar);
-		mlx4_cleanup_uar_table(dev);
-		if (!mlx4_is_slave(dev))
-			mlx4_clear_steering(dev);
-		mlx4_free_eq_table(dev);
-		if (mlx4_is_master(dev))
-			mlx4_multi_func_cleanup(dev);
-		mlx4_close_hca(dev);
-		if (mlx4_is_slave(dev))
-			mlx4_multi_func_cleanup(dev);
-		mlx4_cmd_cleanup(dev);
-
-		if (dev->flags & MLX4_FLAG_MSI_X)
-			pci_disable_msix(pdev);
-		if (dev->flags & MLX4_FLAG_SRIOV) {
-			mlx4_warn(dev, "Disabling SR-IOV\n");
-			pci_disable_sriov(pdev);
-		}
+	for (p = 1; p <= dev->caps.num_ports; p++) {
+		mlx4_cleanup_port_info(&priv->port[p]);
+		mlx4_CLOSE_PORT(dev, p);
+	}
 
-		if (!mlx4_is_slave(dev))
-			mlx4_free_ownership(dev);
+	if (mlx4_is_master(dev))
+		mlx4_free_resource_tracker(dev,
+					   RES_TR_FREE_SLAVES_ONLY);
 
-		kfree(dev->caps.qp0_tunnel);
-		kfree(dev->caps.qp0_proxy);
-		kfree(dev->caps.qp1_tunnel);
-		kfree(dev->caps.qp1_proxy);
-		kfree(dev->dev_vfs);
+	mlx4_cleanup_counters_table(dev);
+	mlx4_cleanup_qp_table(dev);
+	mlx4_cleanup_srq_table(dev);
+	mlx4_cleanup_cq_table(dev);
+	mlx4_cmd_use_polling(dev);
+	mlx4_cleanup_eq_table(dev);
+	mlx4_cleanup_mcg_table(dev);
+	mlx4_cleanup_mr_table(dev);
+	mlx4_cleanup_xrcd_table(dev);
+	mlx4_cleanup_pd_table(dev);
 
-		kfree(priv);
-		pci_release_regions(pdev);
-		pci_disable_device(pdev);
-		pci_set_drvdata(pdev, NULL);
+	if (mlx4_is_master(dev))
+		mlx4_free_resource_tracker(dev,
+					   RES_TR_FREE_STRUCTS_ONLY);
+
+	iounmap(priv->kar);
+	mlx4_uar_free(dev, &priv->driver_uar);
+	mlx4_cleanup_uar_table(dev);
+	if (!mlx4_is_slave(dev))
+		mlx4_clear_steering(dev);
+	mlx4_free_eq_table(dev);
+	if (mlx4_is_master(dev))
+		mlx4_multi_func_cleanup(dev);
+	mlx4_close_hca(dev);
+	if (mlx4_is_slave(dev))
+		mlx4_multi_func_cleanup(dev);
+	mlx4_cmd_cleanup(dev);
+
+	if (dev->flags & MLX4_FLAG_MSI_X)
+		pci_disable_msix(pdev);
+	if (dev->flags & MLX4_FLAG_SRIOV) {
+		mlx4_warn(dev, "Disabling SR-IOV\n");
+		pci_disable_sriov(pdev);
+		dev->num_vfs = 0;
 	}
+
+	if (!mlx4_is_slave(dev))
+		mlx4_free_ownership(dev);
+
+	kfree(dev->caps.qp0_tunnel);
+	kfree(dev->caps.qp0_proxy);
+	kfree(dev->caps.qp1_tunnel);
+	kfree(dev->caps.qp1_proxy);
+	kfree(dev->dev_vfs);
+
+	pci_release_regions(pdev);
+	pci_disable_device(pdev);
+	memset(priv, 0, sizeof(*priv));
+	priv->pci_dev_data = pci_dev_data;
+	priv->removed = 1;
+}
+
+static void mlx4_remove_one(struct pci_dev *pdev)
+{
+	struct mlx4_dev  *dev  = pci_get_drvdata(pdev);
+	struct mlx4_priv *priv = mlx4_priv(dev);
+
+	__mlx4_remove_one(pdev);
+	kfree(priv);
+	pci_set_drvdata(pdev, NULL);
 }
 
 int mlx4_restart_one(struct pci_dev *pdev)
@@ -2692,7 +2717,7 @@ int mlx4_restart_one(struct pci_dev *pdev)
 	int		  pci_dev_data;
 
 	pci_dev_data = priv->pci_dev_data;
-	mlx4_remove_one(pdev);
+	__mlx4_remove_one(pdev);
 	return __mlx4_init_one(pdev, pci_dev_data);
 }
 
@@ -2747,7 +2772,7 @@ MODULE_DEVICE_TABLE(pci, mlx4_pci_table);
 static pci_ers_result_t mlx4_pci_err_detected(struct pci_dev *pdev,
 					      pci_channel_state_t state)
 {
-	mlx4_remove_one(pdev);
+	__mlx4_remove_one(pdev);
 
 	return state == pci_channel_io_perm_failure ?
 		PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_NEED_RESET;
@@ -2755,11 +2780,11 @@ static pci_ers_result_t mlx4_pci_err_detected(struct pci_dev *pdev,
 
 static pci_ers_result_t mlx4_pci_slot_reset(struct pci_dev *pdev)
 {
-	const struct pci_device_id *id;
-	int ret;
+	struct mlx4_dev	 *dev  = pci_get_drvdata(pdev);
+	struct mlx4_priv *priv = mlx4_priv(dev);
+	int               ret;
 
-	id = pci_match_id(mlx4_pci_table, pdev);
-	ret = __mlx4_init_one(pdev, id->driver_data);
+	ret = __mlx4_init_one(pdev, priv->pci_dev_data);
 
 	return ret ? PCI_ERS_RESULT_DISCONNECT : PCI_ERS_RESULT_RECOVERED;
 }
diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
index cf8be41abb36..f9c465101963 100644
--- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h
+++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h
@@ -800,6 +800,7 @@ struct mlx4_priv {
 	spinlock_t		ctx_lock;
 
 	int			pci_dev_data;
+	int                     removed;
 
 	struct list_head        pgdir_list;
 	struct mutex            pgdir_mutex;
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
index b48737dcd3c5..ba20c721ee97 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c
@@ -2139,8 +2139,6 @@ static int qlcnic_83xx_get_nic_configuration(struct qlcnic_adapter *adapter)
 	ahw->max_mac_filters = nic_info.max_mac_filters;
 	ahw->max_mtu = nic_info.max_mtu;
 
-	adapter->max_tx_rings = ahw->max_tx_ques;
-	adapter->max_sds_rings = ahw->max_rx_ques;
 	/* eSwitch capability indicates vNIC mode.
 	 * vNIC and SRIOV are mutually exclusive operational modes.
 	 * If SR-IOV capability is detected, SR-IOV physical function
@@ -2161,6 +2159,7 @@ static int qlcnic_83xx_get_nic_configuration(struct qlcnic_adapter *adapter)
 int qlcnic_83xx_configure_opmode(struct qlcnic_adapter *adapter)
 {
 	struct qlcnic_hardware_context *ahw = adapter->ahw;
+	u16 max_sds_rings, max_tx_rings;
 	int ret;
 
 	ret = qlcnic_83xx_get_nic_configuration(adapter);
@@ -2173,18 +2172,21 @@ int qlcnic_83xx_configure_opmode(struct qlcnic_adapter *adapter)
 		if (qlcnic_83xx_config_vnic_opmode(adapter))
 			return -EIO;
 
-		adapter->max_sds_rings = QLCNIC_MAX_VNIC_SDS_RINGS;
-		adapter->max_tx_rings = QLCNIC_MAX_VNIC_TX_RINGS;
+		max_sds_rings = QLCNIC_MAX_VNIC_SDS_RINGS;
+		max_tx_rings = QLCNIC_MAX_VNIC_TX_RINGS;
 	} else if (ret == QLC_83XX_DEFAULT_OPMODE) {
 		ahw->nic_mode = QLCNIC_DEFAULT_MODE;
 		adapter->nic_ops->init_driver = qlcnic_83xx_init_default_driver;
 		ahw->idc.state_entry = qlcnic_83xx_idc_ready_state_entry;
-		adapter->max_sds_rings = QLCNIC_MAX_SDS_RINGS;
-		adapter->max_tx_rings = QLCNIC_MAX_TX_RINGS;
+		max_sds_rings = QLCNIC_MAX_SDS_RINGS;
+		max_tx_rings = QLCNIC_MAX_TX_RINGS;
 	} else {
 		return -EIO;
 	}
 
+	adapter->max_sds_rings = min(ahw->max_rx_ques, max_sds_rings);
+	adapter->max_tx_rings = min(ahw->max_tx_ques, max_tx_rings);
+
 	return 0;
 }
 
@@ -2348,15 +2350,16 @@ int qlcnic_83xx_init(struct qlcnic_adapter *adapter, int pci_using_dac)
 		goto disable_intr;
 	}
 
+	INIT_DELAYED_WORK(&adapter->idc_aen_work, qlcnic_83xx_idc_aen_work);
+
 	err = qlcnic_83xx_setup_mbx_intr(adapter);
 	if (err)
 		goto disable_mbx_intr;
 
 	qlcnic_83xx_clear_function_resources(adapter);
-
-	INIT_DELAYED_WORK(&adapter->idc_aen_work, qlcnic_83xx_idc_aen_work);
-
+	qlcnic_dcb_enable(adapter->dcb);
 	qlcnic_83xx_initialize_nic(adapter, 1);
+	qlcnic_dcb_get_info(adapter->dcb);
 
 	/* Configure default, SR-IOV or Virtual NIC mode of operation */
 	err = qlcnic_83xx_configure_opmode(adapter);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
index 64dcbf33d8f0..c1e11f5715b0 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c
@@ -883,8 +883,6 @@ int qlcnic_82xx_get_nic_info(struct qlcnic_adapter *adapter,
 		npar_info->max_rx_ques = le16_to_cpu(nic_info->max_rx_ques);
 		npar_info->capabilities = le32_to_cpu(nic_info->capabilities);
 		npar_info->max_mtu = le16_to_cpu(nic_info->max_mtu);
-		adapter->max_tx_rings = npar_info->max_tx_ques;
-		adapter->max_sds_rings = npar_info->max_rx_ques;
 	}
 
 	qlcnic_free_mbx_args(&cmd);
@@ -1356,6 +1354,7 @@ int qlcnic_config_switch_port(struct qlcnic_adapter *adapter,
 			arg2 &= ~BIT_3;
 		break;
 	case QLCNIC_ADD_VLAN:
+			arg1 &= ~(0x0ffff << 16);
 			arg1 |= (BIT_2 | BIT_5);
 			arg1 |= (esw_cfg->vlan_id << 16);
 			break;
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c
index 7d4f54912bad..a51fe18f09a8 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_dcb.c
@@ -330,8 +330,6 @@ static int __qlcnic_dcb_attach(struct qlcnic_dcb *dcb)
 		goto out_free_cfg;
 	}
 
-	qlcnic_dcb_get_info(dcb);
-
 	return 0;
 out_free_cfg:
 	kfree(dcb->cfg);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
index 309d05640883..dbf75393f758 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
@@ -670,7 +670,7 @@ int qlcnic_setup_tss_rss_intr(struct qlcnic_adapter *adapter)
 	else
 		num_msix += adapter->drv_tx_rings;
 
-	if (adapter->drv_rss_rings  > 0)
+	if (adapter->drv_rss_rings > 0)
 		num_msix += adapter->drv_rss_rings;
 	else
 		num_msix += adapter->drv_sds_rings;
@@ -686,19 +686,15 @@ int qlcnic_setup_tss_rss_intr(struct qlcnic_adapter *adapter)
 			return -ENOMEM;
 	}
 
-restore:
 	for (vector = 0; vector < num_msix; vector++)
 		adapter->msix_entries[vector].entry = vector;
 
+restore:
 	err = pci_enable_msix(pdev, adapter->msix_entries, num_msix);
-	if (err == 0) {
-		adapter->ahw->num_msix = num_msix;
-		if (adapter->drv_tss_rings > 0)
-			adapter->drv_tx_rings = adapter->drv_tss_rings;
+	if (err > 0) {
+		if (!adapter->drv_tss_rings && !adapter->drv_rss_rings)
+			return -ENOSPC;
 
-		if (adapter->drv_rss_rings > 0)
-			adapter->drv_sds_rings = adapter->drv_rss_rings;
-	} else {
 		netdev_info(adapter->netdev,
 			    "Unable to allocate %d MSI-X vectors, Available vectors %d\n",
 			    num_msix, err);
@@ -716,12 +712,20 @@ restore:
 			    "Restoring %d Tx, %d SDS rings for total %d vectors.\n",
 			    adapter->drv_tx_rings, adapter->drv_sds_rings,
 			    num_msix);
-		goto restore;
 
-		err = -EIO;
+		goto restore;
+	} else if (err < 0) {
+		return err;
 	}
 
-	return err;
+	adapter->ahw->num_msix = num_msix;
+	if (adapter->drv_tss_rings > 0)
+		adapter->drv_tx_rings = adapter->drv_tss_rings;
+
+	if (adapter->drv_rss_rings > 0)
+		adapter->drv_sds_rings = adapter->drv_rss_rings;
+
+	return 0;
 }
 
 int qlcnic_enable_msix(struct qlcnic_adapter *adapter, u32 num_msix)
@@ -2528,8 +2532,6 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_out_free_hw;
 	}
 
-	qlcnic_dcb_enable(adapter->dcb);
-
 	if (qlcnic_read_mac_addr(adapter))
 		dev_warn(&pdev->dev, "failed to read mac addr\n");
 
@@ -2549,7 +2551,10 @@ qlcnic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 			 "Device does not support MSI interrupts\n");
 
 	if (qlcnic_82xx_check(adapter)) {
+		qlcnic_dcb_enable(adapter->dcb);
+		qlcnic_dcb_get_info(adapter->dcb);
 		err = qlcnic_setup_intr(adapter);
+
 		if (err) {
 			dev_err(&pdev->dev, "Failed to setup interrupt\n");
 			goto err_out_disable_msi;
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
index 14f748cbf0de..280137991544 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c
@@ -461,6 +461,16 @@ static int qlcnic_pci_sriov_disable(struct qlcnic_adapter *adapter)
 {
 	struct net_device *netdev = adapter->netdev;
 
+	if (pci_vfs_assigned(adapter->pdev)) {
+		netdev_err(adapter->netdev,
+			   "SR-IOV VFs belonging to port %d are assigned to VMs. SR-IOV can not be disabled on this port\n",
+			   adapter->portnum);
+		netdev_info(adapter->netdev,
+			    "Please detach SR-IOV VFs belonging to port %d from VMs, and then try to disable SR-IOV on this port\n",
+			    adapter->portnum);
+		return -EPERM;
+	}
+
 	rtnl_lock();
 	if (netif_running(netdev))
 		__qlcnic_down(adapter, netdev);
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
index 448d156c3d08..cd346e27f2e1 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_sysfs.c
@@ -354,7 +354,7 @@ int qlcnic_is_valid_nic_func(struct qlcnic_adapter *adapter, u8 pci_func)
 {
 	int i;
 
-	for (i = 0; i < adapter->ahw->max_vnic_func; i++) {
+	for (i = 0; i < adapter->ahw->total_nic_func; i++) {
 		if (adapter->npars[i].pci_func == pci_func)
 			return i;
 	}
@@ -720,6 +720,7 @@ static ssize_t qlcnic_sysfs_read_npar_config(struct file *file,
 	struct qlcnic_adapter *adapter = dev_get_drvdata(dev);
 	struct qlcnic_npar_func_cfg *np_cfg;
 	struct qlcnic_info nic_info;
+	u8 pci_func;
 	int i, ret;
 	u32 count;
 
@@ -729,26 +730,28 @@ static ssize_t qlcnic_sysfs_read_npar_config(struct file *file,
 
 	count = size / sizeof(struct qlcnic_npar_func_cfg);
 	for (i = 0; i < adapter->ahw->total_nic_func; i++) {
-		if (qlcnic_is_valid_nic_func(adapter, i) < 0)
-			continue;
 		if (adapter->npars[i].pci_func >= count) {
 			dev_dbg(dev, "%s: Total nic functions[%d], App sent function count[%d]\n",
 				__func__, adapter->ahw->total_nic_func, count);
 			continue;
 		}
-		ret = qlcnic_get_nic_info(adapter, &nic_info, i);
-		if (ret)
-			return ret;
 		if (!adapter->npars[i].eswitch_status)
 			continue;
-		np_cfg[i].pci_func = i;
-		np_cfg[i].op_mode = (u8)nic_info.op_mode;
-		np_cfg[i].port_num = nic_info.phys_port;
-		np_cfg[i].fw_capab = nic_info.capabilities;
-		np_cfg[i].min_bw = nic_info.min_tx_bw;
-		np_cfg[i].max_bw = nic_info.max_tx_bw;
-		np_cfg[i].max_tx_queues = nic_info.max_tx_ques;
-		np_cfg[i].max_rx_queues = nic_info.max_rx_ques;
+		pci_func = adapter->npars[i].pci_func;
+		if (qlcnic_is_valid_nic_func(adapter, pci_func) < 0)
+			continue;
+		ret = qlcnic_get_nic_info(adapter, &nic_info, pci_func);
+		if (ret)
+			return ret;
+
+		np_cfg[pci_func].pci_func = pci_func;
+		np_cfg[pci_func].op_mode = (u8)nic_info.op_mode;
+		np_cfg[pci_func].port_num = nic_info.phys_port;
+		np_cfg[pci_func].fw_capab = nic_info.capabilities;
+		np_cfg[pci_func].min_bw = nic_info.min_tx_bw;
+		np_cfg[pci_func].max_bw = nic_info.max_tx_bw;
+		np_cfg[pci_func].max_tx_queues = nic_info.max_tx_ques;
+		np_cfg[pci_func].max_rx_queues = nic_info.max_rx_ques;
 	}
 	return size;
 }
diff --git a/drivers/net/ieee802154/at86rf230.c b/drivers/net/ieee802154/at86rf230.c
index 430bb0db9bc4..e36f194673a4 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -365,7 +365,7 @@ __at86rf230_read_subreg(struct at86rf230_local *lp,
 	dev_vdbg(&lp->spi->dev, "buf[1] = %02x\n", buf[1]);
 
 	if (status == 0)
-		*data = buf[1];
+		*data = (buf[1] & mask) >> shift;
 
 	return status;
 }
@@ -1025,14 +1025,6 @@ static int at86rf230_hw_init(struct at86rf230_local *lp)
 		return -EINVAL;
 	}
 
-	rc = at86rf230_read_subreg(lp, SR_AVDD_OK, &status);
-	if (rc)
-		return rc;
-	if (!status) {
-		dev_err(&lp->spi->dev, "AVDD error\n");
-		return -EINVAL;
-	}
-
 	return 0;
 }
 
diff --git a/drivers/net/vxlan.c b/drivers/net/vxlan.c
index c55e316373a1..82355d5d155a 100644
--- a/drivers/net/vxlan.c
+++ b/drivers/net/vxlan.c
@@ -1755,8 +1755,8 @@ int vxlan_xmit_skb(struct vxlan_sock *vs,
 	if (err)
 		return err;
 
-	return iptunnel_xmit(rt, skb, src, dst, IPPROTO_UDP, tos, ttl, df,
-			     false);
+	return iptunnel_xmit(vs->sock->sk, rt, skb, src, dst, IPPROTO_UDP,
+			     tos, ttl, df, false);
 }
 EXPORT_SYMBOL_GPL(vxlan_xmit_skb);
 
diff --git a/drivers/net/wan/cosa.c b/drivers/net/wan/cosa.c
index 84734a805092..83c39e2858bf 100644
--- a/drivers/net/wan/cosa.c
+++ b/drivers/net/wan/cosa.c
@@ -1521,11 +1521,7 @@ static int cosa_reset_and_read_id(struct cosa_data *cosa, char *idstring)
 	cosa_putstatus(cosa, 0);
 	cosa_getdata8(cosa);
 	cosa_putstatus(cosa, SR_RST);
-#ifdef MODULE
 	msleep(500);
-#else
-	udelay(5*100000);
-#endif
 	/* Disable all IRQs from the card */
 	cosa_putstatus(cosa, 0);
 
diff --git a/drivers/of/base.c b/drivers/of/base.c
index f72d19b7e5d2..6d4ee22708c9 100644
--- a/drivers/of/base.c
+++ b/drivers/of/base.c
@@ -1828,17 +1828,13 @@ int of_update_property(struct device_node *np, struct property *newprop)
 		next = &(*next)->next;
 	}
 	raw_spin_unlock_irqrestore(&devtree_lock, flags);
-	if (rc)
-		return rc;
+	if (!found)
+		return -ENODEV;
 
 	/* Update the sysfs attribute */
-	if (oldprop)
-		sysfs_remove_bin_file(&np->kobj, &oldprop->attr);
+	sysfs_remove_bin_file(&np->kobj, &oldprop->attr);
 	__of_add_property_sysfs(np, newprop);
 
-	if (!found)
-		return -ENODEV;
-
 	return 0;
 }
 
diff --git a/drivers/of/fdt.c b/drivers/of/fdt.c
index fa16a912a927..7a2ef7bb8022 100644
--- a/drivers/of/fdt.c
+++ b/drivers/of/fdt.c
@@ -491,7 +491,7 @@ static int __init __reserved_mem_reserve_reg(unsigned long node,
  * in /reserved-memory matches the values supported by the current implementation,
  * also check if ranges property has been provided
  */
-static int __reserved_mem_check_root(unsigned long node)
+static int __init __reserved_mem_check_root(unsigned long node)
 {
 	__be32 *prop;
 
diff --git a/drivers/pci/host/pci-rcar-gen2.c b/drivers/pci/host/pci-rcar-gen2.c
index fd3e3ab56509..4fe349dcaf59 100644
--- a/drivers/pci/host/pci-rcar-gen2.c
+++ b/drivers/pci/host/pci-rcar-gen2.c
@@ -15,6 +15,7 @@
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of_pci.h>
 #include <linux/pci.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
@@ -180,8 +181,13 @@ static int rcar_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	struct pci_sys_data *sys = dev->bus->sysdata;
 	struct rcar_pci_priv *priv = sys->private_data;
+	int irq;
+
+	irq = of_irq_parse_and_map_pci(dev, slot, pin);
+	if (!irq)
+		irq = priv->irq;
 
-	return priv->irq;
+	return irq;
 }
 
 #ifdef CONFIG_PCI_DEBUG
diff --git a/drivers/pci/host/pci-tegra.c b/drivers/pci/host/pci-tegra.c
index 330f7e3a32dd..083cf37ca047 100644
--- a/drivers/pci/host/pci-tegra.c
+++ b/drivers/pci/host/pci-tegra.c
@@ -639,10 +639,15 @@ static int tegra_pcie_setup(int nr, struct pci_sys_data *sys)
 static int tegra_pcie_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
 {
 	struct tegra_pcie *pcie = sys_to_pcie(pdev->bus->sysdata);
+	int irq;
 
 	tegra_cpuidle_pcie_irqs_in_use();
 
-	return pcie->irq;
+	irq = of_irq_parse_and_map_pci(pdev, slot, pin);
+	if (!irq)
+		irq = pcie->irq;
+
+	return irq;
 }
 
 static void tegra_pcie_add_bus(struct pci_bus *bus)
diff --git a/drivers/pci/host/pcie-designware.c b/drivers/pci/host/pcie-designware.c
index 509a29d84509..c4e373294476 100644
--- a/drivers/pci/host/pcie-designware.c
+++ b/drivers/pci/host/pcie-designware.c
@@ -17,6 +17,7 @@
 #include <linux/module.h>
 #include <linux/msi.h>
 #include <linux/of_address.h>
+#include <linux/of_pci.h>
 #include <linux/pci.h>
 #include <linux/pci_regs.h>
 #include <linux/types.h>
@@ -490,7 +491,7 @@ int __init dw_pcie_host_init(struct pcie_port *pp)
 	dw_pci.nr_controllers = 1;
 	dw_pci.private_data = (void **)&pp;
 
-	pci_common_init(&dw_pci);
+	pci_common_init_dev(pp->dev, &dw_pci);
 	pci_assign_unassigned_resources();
 #ifdef CONFIG_PCI_DOMAINS
 	dw_pci.domain++;
@@ -520,13 +521,13 @@ static void dw_pcie_prog_viewport_cfg1(struct pcie_port *pp, u32 busdev)
 	dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
 			  PCIE_ATU_VIEWPORT);
 	dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_CFG1, PCIE_ATU_CR1);
-	dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
 	dw_pcie_writel_rc(pp, pp->cfg1_base, PCIE_ATU_LOWER_BASE);
 	dw_pcie_writel_rc(pp, (pp->cfg1_base >> 32), PCIE_ATU_UPPER_BASE);
 	dw_pcie_writel_rc(pp, pp->cfg1_base + pp->config.cfg1_size - 1,
 			  PCIE_ATU_LIMIT);
 	dw_pcie_writel_rc(pp, busdev, PCIE_ATU_LOWER_TARGET);
 	dw_pcie_writel_rc(pp, 0, PCIE_ATU_UPPER_TARGET);
+	dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
 }
 
 static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
@@ -535,7 +536,6 @@ static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
 	dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX0,
 			  PCIE_ATU_VIEWPORT);
 	dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_MEM, PCIE_ATU_CR1);
-	dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
 	dw_pcie_writel_rc(pp, pp->mem_base, PCIE_ATU_LOWER_BASE);
 	dw_pcie_writel_rc(pp, (pp->mem_base >> 32), PCIE_ATU_UPPER_BASE);
 	dw_pcie_writel_rc(pp, pp->mem_base + pp->config.mem_size - 1,
@@ -543,6 +543,7 @@ static void dw_pcie_prog_viewport_mem_outbound(struct pcie_port *pp)
 	dw_pcie_writel_rc(pp, pp->config.mem_bus_addr, PCIE_ATU_LOWER_TARGET);
 	dw_pcie_writel_rc(pp, upper_32_bits(pp->config.mem_bus_addr),
 			  PCIE_ATU_UPPER_TARGET);
+	dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
 }
 
 static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp)
@@ -551,7 +552,6 @@ static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp)
 	dw_pcie_writel_rc(pp, PCIE_ATU_REGION_OUTBOUND | PCIE_ATU_REGION_INDEX1,
 			  PCIE_ATU_VIEWPORT);
 	dw_pcie_writel_rc(pp, PCIE_ATU_TYPE_IO, PCIE_ATU_CR1);
-	dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
 	dw_pcie_writel_rc(pp, pp->io_base, PCIE_ATU_LOWER_BASE);
 	dw_pcie_writel_rc(pp, (pp->io_base >> 32), PCIE_ATU_UPPER_BASE);
 	dw_pcie_writel_rc(pp, pp->io_base + pp->config.io_size - 1,
@@ -559,6 +559,7 @@ static void dw_pcie_prog_viewport_io_outbound(struct pcie_port *pp)
 	dw_pcie_writel_rc(pp, pp->config.io_bus_addr, PCIE_ATU_LOWER_TARGET);
 	dw_pcie_writel_rc(pp, upper_32_bits(pp->config.io_bus_addr),
 			  PCIE_ATU_UPPER_TARGET);
+	dw_pcie_writel_rc(pp, PCIE_ATU_ENABLE, PCIE_ATU_CR2);
 }
 
 static int dw_pcie_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
@@ -723,7 +724,7 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 
 	if (pp) {
 		pp->root_bus_nr = sys->busnr;
-		bus = pci_scan_root_bus(NULL, sys->busnr, &dw_pcie_ops,
+		bus = pci_scan_root_bus(pp->dev, sys->busnr, &dw_pcie_ops,
 					sys, &sys->resources);
 	} else {
 		bus = NULL;
@@ -736,8 +737,13 @@ static struct pci_bus *dw_pcie_scan_bus(int nr, struct pci_sys_data *sys)
 static int dw_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
 {
 	struct pcie_port *pp = sys_to_pcie(dev->bus->sysdata);
+	int irq;
+
+	irq = of_irq_parse_and_map_pci(dev, slot, pin);
+	if (!irq)
+		irq = pp->irq;
 
-	return pp->irq;
+	return irq;
 }
 
 static void dw_pcie_add_bus(struct pci_bus *bus)
@@ -764,7 +770,7 @@ void dw_pcie_setup_rc(struct pcie_port *pp)
 	u32 membase;
 	u32 memlimit;
 
-	/* set the number of lines as 4 */
+	/* set the number of lanes */
 	dw_pcie_readl_rc(pp, PCIE_PORT_LINK_CONTROL, &val);
 	val &= ~PORT_LINK_MODE_MASK;
 	switch (pp->lanes) {
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index e49324032611..e00c02d0a094 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -104,16 +104,16 @@ config PINCTRL_BCM2835
 	select PINMUX
 	select PINCONF
 
-config PINCTRL_CAPRI
-	bool "Broadcom Capri pinctrl driver"
+config PINCTRL_BCM281XX
+	bool "Broadcom BCM281xx pinctrl driver"
 	depends on OF
 	select PINMUX
 	select PINCONF
 	select GENERIC_PINCONF
 	select REGMAP_MMIO
 	help
-	  Say Y here to support Broadcom Capri pinctrl driver, which is used for
-	  the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351,
+	  Say Y here to support Broadcom BCM281xx pinctrl driver, which is used
+	  for the BCM281xx SoC family, including BCM11130, BCM11140, BCM11351,
 	  BCM28145, and BCM28155 SoCs.  This driver requires the pinctrl
 	  framework.  GPIO is provided by a separate GPIO driver.
 
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index 4b835880cf80..6d3fd62b9ae8 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -21,7 +21,7 @@ obj-$(CONFIG_PINCTRL_BF60x)	+= pinctrl-adi2-bf60x.o
 obj-$(CONFIG_PINCTRL_AT91)	+= pinctrl-at91.o
 obj-$(CONFIG_PINCTRL_BCM2835)	+= pinctrl-bcm2835.o
 obj-$(CONFIG_PINCTRL_BAYTRAIL)	+= pinctrl-baytrail.o
-obj-$(CONFIG_PINCTRL_CAPRI)	+= pinctrl-capri.o
+obj-$(CONFIG_PINCTRL_BCM281XX)	+= pinctrl-bcm281xx.o
 obj-$(CONFIG_PINCTRL_IMX)	+= pinctrl-imx.o
 obj-$(CONFIG_PINCTRL_IMX1_CORE)	+= pinctrl-imx1-core.o
 obj-$(CONFIG_PINCTRL_IMX27)	+= pinctrl-imx27.o
diff --git a/drivers/pinctrl/pinctrl-bcm281xx.c b/drivers/pinctrl/pinctrl-bcm281xx.c
new file mode 100644
index 000000000000..3bed792b2c03
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-bcm281xx.c
@@ -0,0 +1,1461 @@
+/*
+ * Copyright (C) 2013 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include "core.h"
+#include "pinctrl-utils.h"
+
+/* BCM281XX Pin Control Registers Definitions */
+
+/* Function Select bits are the same for all pin control registers */
+#define BCM281XX_PIN_REG_F_SEL_MASK		0x0700
+#define BCM281XX_PIN_REG_F_SEL_SHIFT		8
+
+/* Standard pin register */
+#define BCM281XX_STD_PIN_REG_DRV_STR_MASK	0x0007
+#define BCM281XX_STD_PIN_REG_DRV_STR_SHIFT	0
+#define BCM281XX_STD_PIN_REG_INPUT_DIS_MASK	0x0008
+#define BCM281XX_STD_PIN_REG_INPUT_DIS_SHIFT	3
+#define BCM281XX_STD_PIN_REG_SLEW_MASK		0x0010
+#define BCM281XX_STD_PIN_REG_SLEW_SHIFT		4
+#define BCM281XX_STD_PIN_REG_PULL_UP_MASK	0x0020
+#define BCM281XX_STD_PIN_REG_PULL_UP_SHIFT	5
+#define BCM281XX_STD_PIN_REG_PULL_DN_MASK	0x0040
+#define BCM281XX_STD_PIN_REG_PULL_DN_SHIFT	6
+#define BCM281XX_STD_PIN_REG_HYST_MASK		0x0080
+#define BCM281XX_STD_PIN_REG_HYST_SHIFT		7
+
+/* I2C pin register */
+#define BCM281XX_I2C_PIN_REG_INPUT_DIS_MASK	0x0004
+#define BCM281XX_I2C_PIN_REG_INPUT_DIS_SHIFT	2
+#define BCM281XX_I2C_PIN_REG_SLEW_MASK		0x0008
+#define BCM281XX_I2C_PIN_REG_SLEW_SHIFT		3
+#define BCM281XX_I2C_PIN_REG_PULL_UP_STR_MASK	0x0070
+#define BCM281XX_I2C_PIN_REG_PULL_UP_STR_SHIFT	4
+
+/* HDMI pin register */
+#define BCM281XX_HDMI_PIN_REG_INPUT_DIS_MASK	0x0008
+#define BCM281XX_HDMI_PIN_REG_INPUT_DIS_SHIFT	3
+#define BCM281XX_HDMI_PIN_REG_MODE_MASK		0x0010
+#define BCM281XX_HDMI_PIN_REG_MODE_SHIFT	4
+
+/**
+ * bcm281xx_pin_type - types of pin register
+ */
+enum bcm281xx_pin_type {
+	BCM281XX_PIN_TYPE_UNKNOWN = 0,
+	BCM281XX_PIN_TYPE_STD,
+	BCM281XX_PIN_TYPE_I2C,
+	BCM281XX_PIN_TYPE_HDMI,
+};
+
+static enum bcm281xx_pin_type std_pin = BCM281XX_PIN_TYPE_STD;
+static enum bcm281xx_pin_type i2c_pin = BCM281XX_PIN_TYPE_I2C;
+static enum bcm281xx_pin_type hdmi_pin = BCM281XX_PIN_TYPE_HDMI;
+
+/**
+ * bcm281xx_pin_function- define pin function
+ */
+struct bcm281xx_pin_function {
+	const char *name;
+	const char * const *groups;
+	const unsigned ngroups;
+};
+
+/**
+ * bcm281xx_pinctrl_data - Broadcom-specific pinctrl data
+ * @reg_base - base of pinctrl registers
+ */
+struct bcm281xx_pinctrl_data {
+	void __iomem *reg_base;
+
+	/* List of all pins */
+	const struct pinctrl_pin_desc *pins;
+	const unsigned npins;
+
+	const struct bcm281xx_pin_function *functions;
+	const unsigned nfunctions;
+
+	struct regmap *regmap;
+};
+
+/*
+ * Pin number definition.  The order here must be the same as defined in the
+ * PADCTRLREG block in the RDB.
+ */
+#define BCM281XX_PIN_ADCSYNC		0
+#define BCM281XX_PIN_BAT_RM		1
+#define BCM281XX_PIN_BSC1_SCL		2
+#define BCM281XX_PIN_BSC1_SDA		3
+#define BCM281XX_PIN_BSC2_SCL		4
+#define BCM281XX_PIN_BSC2_SDA		5
+#define BCM281XX_PIN_CLASSGPWR		6
+#define BCM281XX_PIN_CLK_CX8		7
+#define BCM281XX_PIN_CLKOUT_0		8
+#define BCM281XX_PIN_CLKOUT_1		9
+#define BCM281XX_PIN_CLKOUT_2		10
+#define BCM281XX_PIN_CLKOUT_3		11
+#define BCM281XX_PIN_CLKREQ_IN_0	12
+#define BCM281XX_PIN_CLKREQ_IN_1	13
+#define BCM281XX_PIN_CWS_SYS_REQ1	14
+#define BCM281XX_PIN_CWS_SYS_REQ2	15
+#define BCM281XX_PIN_CWS_SYS_REQ3	16
+#define BCM281XX_PIN_DIGMIC1_CLK	17
+#define BCM281XX_PIN_DIGMIC1_DQ		18
+#define BCM281XX_PIN_DIGMIC2_CLK	19
+#define BCM281XX_PIN_DIGMIC2_DQ		20
+#define BCM281XX_PIN_GPEN13		21
+#define BCM281XX_PIN_GPEN14		22
+#define BCM281XX_PIN_GPEN15		23
+#define BCM281XX_PIN_GPIO00		24
+#define BCM281XX_PIN_GPIO01		25
+#define BCM281XX_PIN_GPIO02		26
+#define BCM281XX_PIN_GPIO03		27
+#define BCM281XX_PIN_GPIO04		28
+#define BCM281XX_PIN_GPIO05		29
+#define BCM281XX_PIN_GPIO06		30
+#define BCM281XX_PIN_GPIO07		31
+#define BCM281XX_PIN_GPIO08		32
+#define BCM281XX_PIN_GPIO09		33
+#define BCM281XX_PIN_GPIO10		34
+#define BCM281XX_PIN_GPIO11		35
+#define BCM281XX_PIN_GPIO12		36
+#define BCM281XX_PIN_GPIO13		37
+#define BCM281XX_PIN_GPIO14		38
+#define BCM281XX_PIN_GPS_PABLANK	39
+#define BCM281XX_PIN_GPS_TMARK		40
+#define BCM281XX_PIN_HDMI_SCL		41
+#define BCM281XX_PIN_HDMI_SDA		42
+#define BCM281XX_PIN_IC_DM		43
+#define BCM281XX_PIN_IC_DP		44
+#define BCM281XX_PIN_KP_COL_IP_0	45
+#define BCM281XX_PIN_KP_COL_IP_1	46
+#define BCM281XX_PIN_KP_COL_IP_2	47
+#define BCM281XX_PIN_KP_COL_IP_3	48
+#define BCM281XX_PIN_KP_ROW_OP_0	49
+#define BCM281XX_PIN_KP_ROW_OP_1	50
+#define BCM281XX_PIN_KP_ROW_OP_2	51
+#define BCM281XX_PIN_KP_ROW_OP_3	52
+#define BCM281XX_PIN_LCD_B_0		53
+#define BCM281XX_PIN_LCD_B_1		54
+#define BCM281XX_PIN_LCD_B_2		55
+#define BCM281XX_PIN_LCD_B_3		56
+#define BCM281XX_PIN_LCD_B_4		57
+#define BCM281XX_PIN_LCD_B_5		58
+#define BCM281XX_PIN_LCD_B_6		59
+#define BCM281XX_PIN_LCD_B_7		60
+#define BCM281XX_PIN_LCD_G_0		61
+#define BCM281XX_PIN_LCD_G_1		62
+#define BCM281XX_PIN_LCD_G_2		63
+#define BCM281XX_PIN_LCD_G_3		64
+#define BCM281XX_PIN_LCD_G_4		65
+#define BCM281XX_PIN_LCD_G_5		66
+#define BCM281XX_PIN_LCD_G_6		67
+#define BCM281XX_PIN_LCD_G_7		68
+#define BCM281XX_PIN_LCD_HSYNC		69
+#define BCM281XX_PIN_LCD_OE		70
+#define BCM281XX_PIN_LCD_PCLK		71
+#define BCM281XX_PIN_LCD_R_0		72
+#define BCM281XX_PIN_LCD_R_1		73
+#define BCM281XX_PIN_LCD_R_2		74
+#define BCM281XX_PIN_LCD_R_3		75
+#define BCM281XX_PIN_LCD_R_4		76
+#define BCM281XX_PIN_LCD_R_5		77
+#define BCM281XX_PIN_LCD_R_6		78
+#define BCM281XX_PIN_LCD_R_7		79
+#define BCM281XX_PIN_LCD_VSYNC		80
+#define BCM281XX_PIN_MDMGPIO0		81
+#define BCM281XX_PIN_MDMGPIO1		82
+#define BCM281XX_PIN_MDMGPIO2		83
+#define BCM281XX_PIN_MDMGPIO3		84
+#define BCM281XX_PIN_MDMGPIO4		85
+#define BCM281XX_PIN_MDMGPIO5		86
+#define BCM281XX_PIN_MDMGPIO6		87
+#define BCM281XX_PIN_MDMGPIO7		88
+#define BCM281XX_PIN_MDMGPIO8		89
+#define BCM281XX_PIN_MPHI_DATA_0	90
+#define BCM281XX_PIN_MPHI_DATA_1	91
+#define BCM281XX_PIN_MPHI_DATA_2	92
+#define BCM281XX_PIN_MPHI_DATA_3	93
+#define BCM281XX_PIN_MPHI_DATA_4	94
+#define BCM281XX_PIN_MPHI_DATA_5	95
+#define BCM281XX_PIN_MPHI_DATA_6	96
+#define BCM281XX_PIN_MPHI_DATA_7	97
+#define BCM281XX_PIN_MPHI_DATA_8	98
+#define BCM281XX_PIN_MPHI_DATA_9	99
+#define BCM281XX_PIN_MPHI_DATA_10	100
+#define BCM281XX_PIN_MPHI_DATA_11	101
+#define BCM281XX_PIN_MPHI_DATA_12	102
+#define BCM281XX_PIN_MPHI_DATA_13	103
+#define BCM281XX_PIN_MPHI_DATA_14	104
+#define BCM281XX_PIN_MPHI_DATA_15	105
+#define BCM281XX_PIN_MPHI_HA0		106
+#define BCM281XX_PIN_MPHI_HAT0		107
+#define BCM281XX_PIN_MPHI_HAT1		108
+#define BCM281XX_PIN_MPHI_HCE0_N	109
+#define BCM281XX_PIN_MPHI_HCE1_N	110
+#define BCM281XX_PIN_MPHI_HRD_N		111
+#define BCM281XX_PIN_MPHI_HWR_N		112
+#define BCM281XX_PIN_MPHI_RUN0		113
+#define BCM281XX_PIN_MPHI_RUN1		114
+#define BCM281XX_PIN_MTX_SCAN_CLK	115
+#define BCM281XX_PIN_MTX_SCAN_DATA	116
+#define BCM281XX_PIN_NAND_AD_0		117
+#define BCM281XX_PIN_NAND_AD_1		118
+#define BCM281XX_PIN_NAND_AD_2		119
+#define BCM281XX_PIN_NAND_AD_3		120
+#define BCM281XX_PIN_NAND_AD_4		121
+#define BCM281XX_PIN_NAND_AD_5		122
+#define BCM281XX_PIN_NAND_AD_6		123
+#define BCM281XX_PIN_NAND_AD_7		124
+#define BCM281XX_PIN_NAND_ALE		125
+#define BCM281XX_PIN_NAND_CEN_0		126
+#define BCM281XX_PIN_NAND_CEN_1		127
+#define BCM281XX_PIN_NAND_CLE		128
+#define BCM281XX_PIN_NAND_OEN		129
+#define BCM281XX_PIN_NAND_RDY_0		130
+#define BCM281XX_PIN_NAND_RDY_1		131
+#define BCM281XX_PIN_NAND_WEN		132
+#define BCM281XX_PIN_NAND_WP		133
+#define BCM281XX_PIN_PC1		134
+#define BCM281XX_PIN_PC2		135
+#define BCM281XX_PIN_PMU_INT		136
+#define BCM281XX_PIN_PMU_SCL		137
+#define BCM281XX_PIN_PMU_SDA		138
+#define BCM281XX_PIN_RFST2G_MTSLOTEN3G	139
+#define BCM281XX_PIN_RGMII_0_RX_CTL	140
+#define BCM281XX_PIN_RGMII_0_RXC	141
+#define BCM281XX_PIN_RGMII_0_RXD_0	142
+#define BCM281XX_PIN_RGMII_0_RXD_1	143
+#define BCM281XX_PIN_RGMII_0_RXD_2	144
+#define BCM281XX_PIN_RGMII_0_RXD_3	145
+#define BCM281XX_PIN_RGMII_0_TX_CTL	146
+#define BCM281XX_PIN_RGMII_0_TXC	147
+#define BCM281XX_PIN_RGMII_0_TXD_0	148
+#define BCM281XX_PIN_RGMII_0_TXD_1	149
+#define BCM281XX_PIN_RGMII_0_TXD_2	150
+#define BCM281XX_PIN_RGMII_0_TXD_3	151
+#define BCM281XX_PIN_RGMII_1_RX_CTL	152
+#define BCM281XX_PIN_RGMII_1_RXC	153
+#define BCM281XX_PIN_RGMII_1_RXD_0	154
+#define BCM281XX_PIN_RGMII_1_RXD_1	155
+#define BCM281XX_PIN_RGMII_1_RXD_2	156
+#define BCM281XX_PIN_RGMII_1_RXD_3	157
+#define BCM281XX_PIN_RGMII_1_TX_CTL	158
+#define BCM281XX_PIN_RGMII_1_TXC	159
+#define BCM281XX_PIN_RGMII_1_TXD_0	160
+#define BCM281XX_PIN_RGMII_1_TXD_1	161
+#define BCM281XX_PIN_RGMII_1_TXD_2	162
+#define BCM281XX_PIN_RGMII_1_TXD_3	163
+#define BCM281XX_PIN_RGMII_GPIO_0	164
+#define BCM281XX_PIN_RGMII_GPIO_1	165
+#define BCM281XX_PIN_RGMII_GPIO_2	166
+#define BCM281XX_PIN_RGMII_GPIO_3	167
+#define BCM281XX_PIN_RTXDATA2G_TXDATA3G1	168
+#define BCM281XX_PIN_RTXEN2G_TXDATA3G2	169
+#define BCM281XX_PIN_RXDATA3G0		170
+#define BCM281XX_PIN_RXDATA3G1		171
+#define BCM281XX_PIN_RXDATA3G2		172
+#define BCM281XX_PIN_SDIO1_CLK		173
+#define BCM281XX_PIN_SDIO1_CMD		174
+#define BCM281XX_PIN_SDIO1_DATA_0	175
+#define BCM281XX_PIN_SDIO1_DATA_1	176
+#define BCM281XX_PIN_SDIO1_DATA_2	177
+#define BCM281XX_PIN_SDIO1_DATA_3	178
+#define BCM281XX_PIN_SDIO4_CLK		179
+#define BCM281XX_PIN_SDIO4_CMD		180
+#define BCM281XX_PIN_SDIO4_DATA_0	181
+#define BCM281XX_PIN_SDIO4_DATA_1	182
+#define BCM281XX_PIN_SDIO4_DATA_2	183
+#define BCM281XX_PIN_SDIO4_DATA_3	184
+#define BCM281XX_PIN_SIM_CLK		185
+#define BCM281XX_PIN_SIM_DATA		186
+#define BCM281XX_PIN_SIM_DET		187
+#define BCM281XX_PIN_SIM_RESETN		188
+#define BCM281XX_PIN_SIM2_CLK		189
+#define BCM281XX_PIN_SIM2_DATA		190
+#define BCM281XX_PIN_SIM2_DET		191
+#define BCM281XX_PIN_SIM2_RESETN	192
+#define BCM281XX_PIN_SRI_C		193
+#define BCM281XX_PIN_SRI_D		194
+#define BCM281XX_PIN_SRI_E		195
+#define BCM281XX_PIN_SSP_EXTCLK		196
+#define BCM281XX_PIN_SSP0_CLK		197
+#define BCM281XX_PIN_SSP0_FS		198
+#define BCM281XX_PIN_SSP0_RXD		199
+#define BCM281XX_PIN_SSP0_TXD		200
+#define BCM281XX_PIN_SSP2_CLK		201
+#define BCM281XX_PIN_SSP2_FS_0		202
+#define BCM281XX_PIN_SSP2_FS_1		203
+#define BCM281XX_PIN_SSP2_FS_2		204
+#define BCM281XX_PIN_SSP2_FS_3		205
+#define BCM281XX_PIN_SSP2_RXD_0		206
+#define BCM281XX_PIN_SSP2_RXD_1		207
+#define BCM281XX_PIN_SSP2_TXD_0		208
+#define BCM281XX_PIN_SSP2_TXD_1		209
+#define BCM281XX_PIN_SSP3_CLK		210
+#define BCM281XX_PIN_SSP3_FS		211
+#define BCM281XX_PIN_SSP3_RXD		212
+#define BCM281XX_PIN_SSP3_TXD		213
+#define BCM281XX_PIN_SSP4_CLK		214
+#define BCM281XX_PIN_SSP4_FS		215
+#define BCM281XX_PIN_SSP4_RXD		216
+#define BCM281XX_PIN_SSP4_TXD		217
+#define BCM281XX_PIN_SSP5_CLK		218
+#define BCM281XX_PIN_SSP5_FS		219
+#define BCM281XX_PIN_SSP5_RXD		220
+#define BCM281XX_PIN_SSP5_TXD		221
+#define BCM281XX_PIN_SSP6_CLK		222
+#define BCM281XX_PIN_SSP6_FS		223
+#define BCM281XX_PIN_SSP6_RXD		224
+#define BCM281XX_PIN_SSP6_TXD		225
+#define BCM281XX_PIN_STAT_1		226
+#define BCM281XX_PIN_STAT_2		227
+#define BCM281XX_PIN_SYSCLKEN		228
+#define BCM281XX_PIN_TRACECLK		229
+#define BCM281XX_PIN_TRACEDT00		230
+#define BCM281XX_PIN_TRACEDT01		231
+#define BCM281XX_PIN_TRACEDT02		232
+#define BCM281XX_PIN_TRACEDT03		233
+#define BCM281XX_PIN_TRACEDT04		234
+#define BCM281XX_PIN_TRACEDT05		235
+#define BCM281XX_PIN_TRACEDT06		236
+#define BCM281XX_PIN_TRACEDT07		237
+#define BCM281XX_PIN_TRACEDT08		238
+#define BCM281XX_PIN_TRACEDT09		239
+#define BCM281XX_PIN_TRACEDT10		240
+#define BCM281XX_PIN_TRACEDT11		241
+#define BCM281XX_PIN_TRACEDT12		242
+#define BCM281XX_PIN_TRACEDT13		243
+#define BCM281XX_PIN_TRACEDT14		244
+#define BCM281XX_PIN_TRACEDT15		245
+#define BCM281XX_PIN_TXDATA3G0		246
+#define BCM281XX_PIN_TXPWRIND		247
+#define BCM281XX_PIN_UARTB1_UCTS	248
+#define BCM281XX_PIN_UARTB1_URTS	249
+#define BCM281XX_PIN_UARTB1_URXD	250
+#define BCM281XX_PIN_UARTB1_UTXD	251
+#define BCM281XX_PIN_UARTB2_URXD	252
+#define BCM281XX_PIN_UARTB2_UTXD	253
+#define BCM281XX_PIN_UARTB3_UCTS	254
+#define BCM281XX_PIN_UARTB3_URTS	255
+#define BCM281XX_PIN_UARTB3_URXD	256
+#define BCM281XX_PIN_UARTB3_UTXD	257
+#define BCM281XX_PIN_UARTB4_UCTS	258
+#define BCM281XX_PIN_UARTB4_URTS	259
+#define BCM281XX_PIN_UARTB4_URXD	260
+#define BCM281XX_PIN_UARTB4_UTXD	261
+#define BCM281XX_PIN_VC_CAM1_SCL	262
+#define BCM281XX_PIN_VC_CAM1_SDA	263
+#define BCM281XX_PIN_VC_CAM2_SCL	264
+#define BCM281XX_PIN_VC_CAM2_SDA	265
+#define BCM281XX_PIN_VC_CAM3_SCL	266
+#define BCM281XX_PIN_VC_CAM3_SDA	267
+
+#define BCM281XX_PIN_DESC(a, b, c) \
+	{ .number = a, .name = b, .drv_data = &c##_pin }
+
+/*
+ * Pin description definition.  The order here must be the same as defined in
+ * the PADCTRLREG block in the RDB, since the pin number is used as an index
+ * into this array.
+ */
+static const struct pinctrl_pin_desc bcm281xx_pinctrl_pins[] = {
+	BCM281XX_PIN_DESC(BCM281XX_PIN_ADCSYNC, "adcsync", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_BAT_RM, "bat_rm", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_BSC1_SCL, "bsc1_scl", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_BSC1_SDA, "bsc1_sda", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_BSC2_SCL, "bsc2_scl", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_BSC2_SDA, "bsc2_sda", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLASSGPWR, "classgpwr", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLK_CX8, "clk_cx8", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_0, "clkout_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_1, "clkout_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_2, "clkout_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLKOUT_3, "clkout_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLKREQ_IN_0, "clkreq_in_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CLKREQ_IN_1, "clkreq_in_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ1, "cws_sys_req1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ2, "cws_sys_req2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_CWS_SYS_REQ3, "cws_sys_req3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC1_CLK, "digmic1_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC1_DQ, "digmic1_dq", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC2_CLK, "digmic2_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_DIGMIC2_DQ, "digmic2_dq", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN13, "gpen13", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN14, "gpen14", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPEN15, "gpen15", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO00, "gpio00", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO01, "gpio01", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO02, "gpio02", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO03, "gpio03", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO04, "gpio04", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO05, "gpio05", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO06, "gpio06", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO07, "gpio07", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO08, "gpio08", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO09, "gpio09", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO10, "gpio10", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO11, "gpio11", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO12, "gpio12", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO13, "gpio13", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPIO14, "gpio14", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPS_PABLANK, "gps_pablank", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_GPS_TMARK, "gps_tmark", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_HDMI_SCL, "hdmi_scl", hdmi),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_HDMI_SDA, "hdmi_sda", hdmi),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_IC_DM, "ic_dm", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_IC_DP, "ic_dp", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_0, "kp_col_ip_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_1, "kp_col_ip_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_2, "kp_col_ip_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_COL_IP_3, "kp_col_ip_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_0, "kp_row_op_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_1, "kp_row_op_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_2, "kp_row_op_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_KP_ROW_OP_3, "kp_row_op_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_0, "lcd_b_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_1, "lcd_b_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_2, "lcd_b_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_3, "lcd_b_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_4, "lcd_b_4", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_5, "lcd_b_5", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_6, "lcd_b_6", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_B_7, "lcd_b_7", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_0, "lcd_g_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_1, "lcd_g_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_2, "lcd_g_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_3, "lcd_g_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_4, "lcd_g_4", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_5, "lcd_g_5", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_6, "lcd_g_6", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_G_7, "lcd_g_7", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_HSYNC, "lcd_hsync", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_OE, "lcd_oe", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_PCLK, "lcd_pclk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_0, "lcd_r_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_1, "lcd_r_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_2, "lcd_r_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_3, "lcd_r_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_4, "lcd_r_4", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_5, "lcd_r_5", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_6, "lcd_r_6", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_R_7, "lcd_r_7", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_LCD_VSYNC, "lcd_vsync", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO0, "mdmgpio0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO1, "mdmgpio1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO2, "mdmgpio2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO3, "mdmgpio3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO4, "mdmgpio4", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO5, "mdmgpio5", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO6, "mdmgpio6", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO7, "mdmgpio7", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MDMGPIO8, "mdmgpio8", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_0, "mphi_data_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_1, "mphi_data_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_2, "mphi_data_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_3, "mphi_data_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_4, "mphi_data_4", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_5, "mphi_data_5", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_6, "mphi_data_6", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_7, "mphi_data_7", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_8, "mphi_data_8", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_9, "mphi_data_9", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_10, "mphi_data_10", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_11, "mphi_data_11", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_12, "mphi_data_12", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_13, "mphi_data_13", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_14, "mphi_data_14", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_DATA_15, "mphi_data_15", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HA0, "mphi_ha0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HAT0, "mphi_hat0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HAT1, "mphi_hat1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HCE0_N, "mphi_hce0_n", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HCE1_N, "mphi_hce1_n", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HRD_N, "mphi_hrd_n", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_HWR_N, "mphi_hwr_n", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_RUN0, "mphi_run0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MPHI_RUN1, "mphi_run1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MTX_SCAN_CLK, "mtx_scan_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_MTX_SCAN_DATA, "mtx_scan_data", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_0, "nand_ad_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_1, "nand_ad_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_2, "nand_ad_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_3, "nand_ad_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_4, "nand_ad_4", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_5, "nand_ad_5", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_6, "nand_ad_6", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_AD_7, "nand_ad_7", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_ALE, "nand_ale", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CEN_0, "nand_cen_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CEN_1, "nand_cen_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_CLE, "nand_cle", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_OEN, "nand_oen", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_RDY_0, "nand_rdy_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_RDY_1, "nand_rdy_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_WEN, "nand_wen", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_NAND_WP, "nand_wp", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_PC1, "pc1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_PC2, "pc2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_INT, "pmu_int", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_SCL, "pmu_scl", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_PMU_SDA, "pmu_sda", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RFST2G_MTSLOTEN3G, "rfst2g_mtsloten3g",
+		std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RX_CTL, "rgmii_0_rx_ctl", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXC, "rgmii_0_rxc", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_0, "rgmii_0_rxd_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_1, "rgmii_0_rxd_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_2, "rgmii_0_rxd_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_RXD_3, "rgmii_0_rxd_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TX_CTL, "rgmii_0_tx_ctl", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXC, "rgmii_0_txc", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_0, "rgmii_0_txd_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_1, "rgmii_0_txd_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_2, "rgmii_0_txd_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_0_TXD_3, "rgmii_0_txd_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RX_CTL, "rgmii_1_rx_ctl", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXC, "rgmii_1_rxc", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_0, "rgmii_1_rxd_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_1, "rgmii_1_rxd_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_2, "rgmii_1_rxd_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_RXD_3, "rgmii_1_rxd_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TX_CTL, "rgmii_1_tx_ctl", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXC, "rgmii_1_txc", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_0, "rgmii_1_txd_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_1, "rgmii_1_txd_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_2, "rgmii_1_txd_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_1_TXD_3, "rgmii_1_txd_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_0, "rgmii_gpio_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_1, "rgmii_gpio_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_2, "rgmii_gpio_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RGMII_GPIO_3, "rgmii_gpio_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RTXDATA2G_TXDATA3G1,
+		"rtxdata2g_txdata3g1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RTXEN2G_TXDATA3G2, "rtxen2g_txdata3g2",
+		std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G0, "rxdata3g0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G1, "rxdata3g1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_RXDATA3G2, "rxdata3g2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_CLK, "sdio1_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_CMD, "sdio1_cmd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_0, "sdio1_data_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_1, "sdio1_data_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_2, "sdio1_data_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO1_DATA_3, "sdio1_data_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_CLK, "sdio4_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_CMD, "sdio4_cmd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_0, "sdio4_data_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_1, "sdio4_data_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_2, "sdio4_data_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SDIO4_DATA_3, "sdio4_data_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_CLK, "sim_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_DATA, "sim_data", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_DET, "sim_det", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM_RESETN, "sim_resetn", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_CLK, "sim2_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_DATA, "sim2_data", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_DET, "sim2_det", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SIM2_RESETN, "sim2_resetn", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_C, "sri_c", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_D, "sri_d", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SRI_E, "sri_e", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP_EXTCLK, "ssp_extclk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_CLK, "ssp0_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_FS, "ssp0_fs", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_RXD, "ssp0_rxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP0_TXD, "ssp0_txd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_CLK, "ssp2_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_0, "ssp2_fs_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_1, "ssp2_fs_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_2, "ssp2_fs_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_FS_3, "ssp2_fs_3", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_RXD_0, "ssp2_rxd_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_RXD_1, "ssp2_rxd_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_TXD_0, "ssp2_txd_0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP2_TXD_1, "ssp2_txd_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_CLK, "ssp3_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_FS, "ssp3_fs", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_RXD, "ssp3_rxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP3_TXD, "ssp3_txd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_CLK, "ssp4_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_FS, "ssp4_fs", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_RXD, "ssp4_rxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP4_TXD, "ssp4_txd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_CLK, "ssp5_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_FS, "ssp5_fs", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_RXD, "ssp5_rxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP5_TXD, "ssp5_txd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_CLK, "ssp6_clk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_FS, "ssp6_fs", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_RXD, "ssp6_rxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SSP6_TXD, "ssp6_txd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_STAT_1, "stat_1", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_STAT_2, "stat_2", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_SYSCLKEN, "sysclken", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACECLK, "traceclk", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT00, "tracedt00", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT01, "tracedt01", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT02, "tracedt02", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT03, "tracedt03", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT04, "tracedt04", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT05, "tracedt05", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT06, "tracedt06", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT07, "tracedt07", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT08, "tracedt08", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT09, "tracedt09", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT10, "tracedt10", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT11, "tracedt11", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT12, "tracedt12", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT13, "tracedt13", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT14, "tracedt14", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TRACEDT15, "tracedt15", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TXDATA3G0, "txdata3g0", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_TXPWRIND, "txpwrind", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_UCTS, "uartb1_ucts", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_URTS, "uartb1_urts", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_URXD, "uartb1_urxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB1_UTXD, "uartb1_utxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB2_URXD, "uartb2_urxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB2_UTXD, "uartb2_utxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_UCTS, "uartb3_ucts", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_URTS, "uartb3_urts", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_URXD, "uartb3_urxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB3_UTXD, "uartb3_utxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_UCTS, "uartb4_ucts", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_URTS, "uartb4_urts", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_URXD, "uartb4_urxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_UARTB4_UTXD, "uartb4_utxd", std),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM1_SCL, "vc_cam1_scl", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM1_SDA, "vc_cam1_sda", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM2_SCL, "vc_cam2_scl", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM2_SDA, "vc_cam2_sda", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM3_SCL, "vc_cam3_scl", i2c),
+	BCM281XX_PIN_DESC(BCM281XX_PIN_VC_CAM3_SDA, "vc_cam3_sda", i2c),
+};
+
+static const char * const bcm281xx_alt_groups[] = {
+	"adcsync",
+	"bat_rm",
+	"bsc1_scl",
+	"bsc1_sda",
+	"bsc2_scl",
+	"bsc2_sda",
+	"classgpwr",
+	"clk_cx8",
+	"clkout_0",
+	"clkout_1",
+	"clkout_2",
+	"clkout_3",
+	"clkreq_in_0",
+	"clkreq_in_1",
+	"cws_sys_req1",
+	"cws_sys_req2",
+	"cws_sys_req3",
+	"digmic1_clk",
+	"digmic1_dq",
+	"digmic2_clk",
+	"digmic2_dq",
+	"gpen13",
+	"gpen14",
+	"gpen15",
+	"gpio00",
+	"gpio01",
+	"gpio02",
+	"gpio03",
+	"gpio04",
+	"gpio05",
+	"gpio06",
+	"gpio07",
+	"gpio08",
+	"gpio09",
+	"gpio10",
+	"gpio11",
+	"gpio12",
+	"gpio13",
+	"gpio14",
+	"gps_pablank",
+	"gps_tmark",
+	"hdmi_scl",
+	"hdmi_sda",
+	"ic_dm",
+	"ic_dp",
+	"kp_col_ip_0",
+	"kp_col_ip_1",
+	"kp_col_ip_2",
+	"kp_col_ip_3",
+	"kp_row_op_0",
+	"kp_row_op_1",
+	"kp_row_op_2",
+	"kp_row_op_3",
+	"lcd_b_0",
+	"lcd_b_1",
+	"lcd_b_2",
+	"lcd_b_3",
+	"lcd_b_4",
+	"lcd_b_5",
+	"lcd_b_6",
+	"lcd_b_7",
+	"lcd_g_0",
+	"lcd_g_1",
+	"lcd_g_2",
+	"lcd_g_3",
+	"lcd_g_4",
+	"lcd_g_5",
+	"lcd_g_6",
+	"lcd_g_7",
+	"lcd_hsync",
+	"lcd_oe",
+	"lcd_pclk",
+	"lcd_r_0",
+	"lcd_r_1",
+	"lcd_r_2",
+	"lcd_r_3",
+	"lcd_r_4",
+	"lcd_r_5",
+	"lcd_r_6",
+	"lcd_r_7",
+	"lcd_vsync",
+	"mdmgpio0",
+	"mdmgpio1",
+	"mdmgpio2",
+	"mdmgpio3",
+	"mdmgpio4",
+	"mdmgpio5",
+	"mdmgpio6",
+	"mdmgpio7",
+	"mdmgpio8",
+	"mphi_data_0",
+	"mphi_data_1",
+	"mphi_data_2",
+	"mphi_data_3",
+	"mphi_data_4",
+	"mphi_data_5",
+	"mphi_data_6",
+	"mphi_data_7",
+	"mphi_data_8",
+	"mphi_data_9",
+	"mphi_data_10",
+	"mphi_data_11",
+	"mphi_data_12",
+	"mphi_data_13",
+	"mphi_data_14",
+	"mphi_data_15",
+	"mphi_ha0",
+	"mphi_hat0",
+	"mphi_hat1",
+	"mphi_hce0_n",
+	"mphi_hce1_n",
+	"mphi_hrd_n",
+	"mphi_hwr_n",
+	"mphi_run0",
+	"mphi_run1",
+	"mtx_scan_clk",
+	"mtx_scan_data",
+	"nand_ad_0",
+	"nand_ad_1",
+	"nand_ad_2",
+	"nand_ad_3",
+	"nand_ad_4",
+	"nand_ad_5",
+	"nand_ad_6",
+	"nand_ad_7",
+	"nand_ale",
+	"nand_cen_0",
+	"nand_cen_1",
+	"nand_cle",
+	"nand_oen",
+	"nand_rdy_0",
+	"nand_rdy_1",
+	"nand_wen",
+	"nand_wp",
+	"pc1",
+	"pc2",
+	"pmu_int",
+	"pmu_scl",
+	"pmu_sda",
+	"rfst2g_mtsloten3g",
+	"rgmii_0_rx_ctl",
+	"rgmii_0_rxc",
+	"rgmii_0_rxd_0",
+	"rgmii_0_rxd_1",
+	"rgmii_0_rxd_2",
+	"rgmii_0_rxd_3",
+	"rgmii_0_tx_ctl",
+	"rgmii_0_txc",
+	"rgmii_0_txd_0",
+	"rgmii_0_txd_1",
+	"rgmii_0_txd_2",
+	"rgmii_0_txd_3",
+	"rgmii_1_rx_ctl",
+	"rgmii_1_rxc",
+	"rgmii_1_rxd_0",
+	"rgmii_1_rxd_1",
+	"rgmii_1_rxd_2",
+	"rgmii_1_rxd_3",
+	"rgmii_1_tx_ctl",
+	"rgmii_1_txc",
+	"rgmii_1_txd_0",
+	"rgmii_1_txd_1",
+	"rgmii_1_txd_2",
+	"rgmii_1_txd_3",
+	"rgmii_gpio_0",
+	"rgmii_gpio_1",
+	"rgmii_gpio_2",
+	"rgmii_gpio_3",
+	"rtxdata2g_txdata3g1",
+	"rtxen2g_txdata3g2",
+	"rxdata3g0",
+	"rxdata3g1",
+	"rxdata3g2",
+	"sdio1_clk",
+	"sdio1_cmd",
+	"sdio1_data_0",
+	"sdio1_data_1",
+	"sdio1_data_2",
+	"sdio1_data_3",
+	"sdio4_clk",
+	"sdio4_cmd",
+	"sdio4_data_0",
+	"sdio4_data_1",
+	"sdio4_data_2",
+	"sdio4_data_3",
+	"sim_clk",
+	"sim_data",
+	"sim_det",
+	"sim_resetn",
+	"sim2_clk",
+	"sim2_data",
+	"sim2_det",
+	"sim2_resetn",
+	"sri_c",
+	"sri_d",
+	"sri_e",
+	"ssp_extclk",
+	"ssp0_clk",
+	"ssp0_fs",
+	"ssp0_rxd",
+	"ssp0_txd",
+	"ssp2_clk",
+	"ssp2_fs_0",
+	"ssp2_fs_1",
+	"ssp2_fs_2",
+	"ssp2_fs_3",
+	"ssp2_rxd_0",
+	"ssp2_rxd_1",
+	"ssp2_txd_0",
+	"ssp2_txd_1",
+	"ssp3_clk",
+	"ssp3_fs",
+	"ssp3_rxd",
+	"ssp3_txd",
+	"ssp4_clk",
+	"ssp4_fs",
+	"ssp4_rxd",
+	"ssp4_txd",
+	"ssp5_clk",
+	"ssp5_fs",
+	"ssp5_rxd",
+	"ssp5_txd",
+	"ssp6_clk",
+	"ssp6_fs",
+	"ssp6_rxd",
+	"ssp6_txd",
+	"stat_1",
+	"stat_2",
+	"sysclken",
+	"traceclk",
+	"tracedt00",
+	"tracedt01",
+	"tracedt02",
+	"tracedt03",
+	"tracedt04",
+	"tracedt05",
+	"tracedt06",
+	"tracedt07",
+	"tracedt08",
+	"tracedt09",
+	"tracedt10",
+	"tracedt11",
+	"tracedt12",
+	"tracedt13",
+	"tracedt14",
+	"tracedt15",
+	"txdata3g0",
+	"txpwrind",
+	"uartb1_ucts",
+	"uartb1_urts",
+	"uartb1_urxd",
+	"uartb1_utxd",
+	"uartb2_urxd",
+	"uartb2_utxd",
+	"uartb3_ucts",
+	"uartb3_urts",
+	"uartb3_urxd",
+	"uartb3_utxd",
+	"uartb4_ucts",
+	"uartb4_urts",
+	"uartb4_urxd",
+	"uartb4_utxd",
+	"vc_cam1_scl",
+	"vc_cam1_sda",
+	"vc_cam2_scl",
+	"vc_cam2_sda",
+	"vc_cam3_scl",
+	"vc_cam3_sda",
+};
+
+/* Every pin can implement all ALT1-ALT4 functions */
+#define BCM281XX_PIN_FUNCTION(fcn_name)			\
+{							\
+	.name = #fcn_name,				\
+	.groups = bcm281xx_alt_groups,			\
+	.ngroups = ARRAY_SIZE(bcm281xx_alt_groups),	\
+}
+
+static const struct bcm281xx_pin_function bcm281xx_functions[] = {
+	BCM281XX_PIN_FUNCTION(alt1),
+	BCM281XX_PIN_FUNCTION(alt2),
+	BCM281XX_PIN_FUNCTION(alt3),
+	BCM281XX_PIN_FUNCTION(alt4),
+};
+
+static struct bcm281xx_pinctrl_data bcm281xx_pinctrl = {
+	.pins = bcm281xx_pinctrl_pins,
+	.npins = ARRAY_SIZE(bcm281xx_pinctrl_pins),
+	.functions = bcm281xx_functions,
+	.nfunctions = ARRAY_SIZE(bcm281xx_functions),
+};
+
+static inline enum bcm281xx_pin_type pin_type_get(struct pinctrl_dev *pctldev,
+						  unsigned pin)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+	if (pin >= pdata->npins)
+		return BCM281XX_PIN_TYPE_UNKNOWN;
+
+	return *(enum bcm281xx_pin_type *)(pdata->pins[pin].drv_data);
+}
+
+#define BCM281XX_PIN_SHIFT(type, param) \
+	(BCM281XX_ ## type ## _PIN_REG_ ## param ## _SHIFT)
+
+#define BCM281XX_PIN_MASK(type, param) \
+	(BCM281XX_ ## type ## _PIN_REG_ ## param ## _MASK)
+
+/*
+ * This helper function is used to build up the value and mask used to write to
+ * a pin register, but does not actually write to the register.
+ */
+static inline void bcm281xx_pin_update(u32 *reg_val, u32 *reg_mask,
+				       u32 param_val, u32 param_shift,
+				       u32 param_mask)
+{
+	*reg_val &= ~param_mask;
+	*reg_val |= (param_val << param_shift) & param_mask;
+	*reg_mask |= param_mask;
+}
+
+static struct regmap_config bcm281xx_pinctrl_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = BCM281XX_PIN_VC_CAM3_SDA,
+};
+
+static int bcm281xx_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+	return pdata->npins;
+}
+
+static const char *bcm281xx_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
+						   unsigned group)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+	return pdata->pins[group].name;
+}
+
+static int bcm281xx_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+					   unsigned group,
+					   const unsigned **pins,
+					   unsigned *num_pins)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+	*pins = &pdata->pins[group].number;
+	*num_pins = 1;
+
+	return 0;
+}
+
+static void bcm281xx_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
+					  struct seq_file *s,
+					  unsigned offset)
+{
+	seq_printf(s, " %s", dev_name(pctldev->dev));
+}
+
+static struct pinctrl_ops bcm281xx_pinctrl_ops = {
+	.get_groups_count = bcm281xx_pinctrl_get_groups_count,
+	.get_group_name = bcm281xx_pinctrl_get_group_name,
+	.get_group_pins = bcm281xx_pinctrl_get_group_pins,
+	.pin_dbg_show = bcm281xx_pinctrl_pin_dbg_show,
+	.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
+	.dt_free_map = pinctrl_utils_dt_free_map,
+};
+
+static int bcm281xx_pinctrl_get_fcns_count(struct pinctrl_dev *pctldev)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+	return pdata->nfunctions;
+}
+
+static const char *bcm281xx_pinctrl_get_fcn_name(struct pinctrl_dev *pctldev,
+						 unsigned function)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+	return pdata->functions[function].name;
+}
+
+static int bcm281xx_pinctrl_get_fcn_groups(struct pinctrl_dev *pctldev,
+					   unsigned function,
+					   const char * const **groups,
+					   unsigned * const num_groups)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+
+	*groups = pdata->functions[function].groups;
+	*num_groups = pdata->functions[function].ngroups;
+
+	return 0;
+}
+
+static int bcm281xx_pinmux_enable(struct pinctrl_dev *pctldev,
+				  unsigned function,
+				  unsigned group)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+	const struct bcm281xx_pin_function *f = &pdata->functions[function];
+	u32 offset = 4 * pdata->pins[group].number;
+	int rc = 0;
+
+	dev_dbg(pctldev->dev,
+		"%s(): Enable function %s (%d) of pin %s (%d) @offset 0x%x.\n",
+		__func__, f->name, function, pdata->pins[group].name,
+		pdata->pins[group].number, offset);
+
+	rc = regmap_update_bits(pdata->regmap, offset,
+		BCM281XX_PIN_REG_F_SEL_MASK,
+		function << BCM281XX_PIN_REG_F_SEL_SHIFT);
+	if (rc)
+		dev_err(pctldev->dev,
+			"Error updating register for pin %s (%d).\n",
+			pdata->pins[group].name, pdata->pins[group].number);
+
+	return rc;
+}
+
+static struct pinmux_ops bcm281xx_pinctrl_pinmux_ops = {
+	.get_functions_count = bcm281xx_pinctrl_get_fcns_count,
+	.get_function_name = bcm281xx_pinctrl_get_fcn_name,
+	.get_function_groups = bcm281xx_pinctrl_get_fcn_groups,
+	.enable = bcm281xx_pinmux_enable,
+};
+
+static int bcm281xx_pinctrl_pin_config_get(struct pinctrl_dev *pctldev,
+					   unsigned pin,
+					   unsigned long *config)
+{
+	return -ENOTSUPP;
+}
+
+
+/* Goes through the configs and update register val/mask */
+static int bcm281xx_std_pin_update(struct pinctrl_dev *pctldev,
+				   unsigned pin,
+				   unsigned long *configs,
+				   unsigned num_configs,
+				   u32 *val,
+				   u32 *mask)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+	int i;
+	enum pin_config_param param;
+	u16 arg;
+
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		arg = pinconf_to_config_argument(configs[i]);
+
+		switch (param) {
+		case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
+			arg = (arg >= 1 ? 1 : 0);
+			bcm281xx_pin_update(val, mask, arg,
+				BCM281XX_PIN_SHIFT(STD, HYST),
+				BCM281XX_PIN_MASK(STD, HYST));
+			break;
+		/*
+		 * The pin bias can only be one of pull-up, pull-down, or
+		 * disable.  The user does not need to specify a value for the
+		 * property, and the default value from pinconf-generic is
+		 * ignored.
+		 */
+		case PIN_CONFIG_BIAS_DISABLE:
+			bcm281xx_pin_update(val, mask, 0,
+				BCM281XX_PIN_SHIFT(STD, PULL_UP),
+				BCM281XX_PIN_MASK(STD, PULL_UP));
+			bcm281xx_pin_update(val, mask, 0,
+				BCM281XX_PIN_SHIFT(STD, PULL_DN),
+				BCM281XX_PIN_MASK(STD, PULL_DN));
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_UP:
+			bcm281xx_pin_update(val, mask, 1,
+				BCM281XX_PIN_SHIFT(STD, PULL_UP),
+				BCM281XX_PIN_MASK(STD, PULL_UP));
+			bcm281xx_pin_update(val, mask, 0,
+				BCM281XX_PIN_SHIFT(STD, PULL_DN),
+				BCM281XX_PIN_MASK(STD, PULL_DN));
+			break;
+
+		case PIN_CONFIG_BIAS_PULL_DOWN:
+			bcm281xx_pin_update(val, mask, 0,
+				BCM281XX_PIN_SHIFT(STD, PULL_UP),
+				BCM281XX_PIN_MASK(STD, PULL_UP));
+			bcm281xx_pin_update(val, mask, 1,
+				BCM281XX_PIN_SHIFT(STD, PULL_DN),
+				BCM281XX_PIN_MASK(STD, PULL_DN));
+			break;
+
+		case PIN_CONFIG_SLEW_RATE:
+			arg = (arg >= 1 ? 1 : 0);
+			bcm281xx_pin_update(val, mask, arg,
+				BCM281XX_PIN_SHIFT(STD, SLEW),
+				BCM281XX_PIN_MASK(STD, SLEW));
+			break;
+
+		case PIN_CONFIG_INPUT_ENABLE:
+			/* inversed since register is for input _disable_ */
+			arg = (arg >= 1 ? 0 : 1);
+			bcm281xx_pin_update(val, mask, arg,
+				BCM281XX_PIN_SHIFT(STD, INPUT_DIS),
+				BCM281XX_PIN_MASK(STD, INPUT_DIS));
+			break;
+
+		case PIN_CONFIG_DRIVE_STRENGTH:
+			/* Valid range is 2-16 mA, even numbers only */
+			if ((arg < 2) || (arg > 16) || (arg % 2)) {
+				dev_err(pctldev->dev,
+					"Invalid Drive Strength value (%d) for "
+					"pin %s (%d). Valid values are "
+					"(2..16) mA, even numbers only.\n",
+					arg, pdata->pins[pin].name, pin);
+				return -EINVAL;
+			}
+			bcm281xx_pin_update(val, mask, (arg/2)-1,
+				BCM281XX_PIN_SHIFT(STD, DRV_STR),
+				BCM281XX_PIN_MASK(STD, DRV_STR));
+			break;
+
+		default:
+			dev_err(pctldev->dev,
+				"Unrecognized pin config %d for pin %s (%d).\n",
+				param, pdata->pins[pin].name, pin);
+			return -EINVAL;
+
+		} /* switch config */
+	} /* for each config */
+
+	return 0;
+}
+
+/*
+ * The pull-up strength for an I2C pin is represented by bits 4-6 in the
+ * register with the following mapping:
+ *   0b000: No pull-up
+ *   0b001: 1200 Ohm
+ *   0b010: 1800 Ohm
+ *   0b011: 720 Ohm
+ *   0b100: 2700 Ohm
+ *   0b101: 831 Ohm
+ *   0b110: 1080 Ohm
+ *   0b111: 568 Ohm
+ * This array maps pull-up strength in Ohms to register values (1+index).
+ */
+static const u16 bcm281xx_pullup_map[] = {
+	1200, 1800, 720, 2700, 831, 1080, 568
+};
+
+/* Goes through the configs and update register val/mask */
+static int bcm281xx_i2c_pin_update(struct pinctrl_dev *pctldev,
+				   unsigned pin,
+				   unsigned long *configs,
+				   unsigned num_configs,
+				   u32 *val,
+				   u32 *mask)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+	int i, j;
+	enum pin_config_param param;
+	u16 arg;
+
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		arg = pinconf_to_config_argument(configs[i]);
+
+		switch (param) {
+		case PIN_CONFIG_BIAS_PULL_UP:
+			for (j = 0; j < ARRAY_SIZE(bcm281xx_pullup_map); j++)
+				if (bcm281xx_pullup_map[j] == arg)
+					break;
+
+			if (j == ARRAY_SIZE(bcm281xx_pullup_map)) {
+				dev_err(pctldev->dev,
+					"Invalid pull-up value (%d) for pin %s "
+					"(%d). Valid values are 568, 720, 831, "
+					"1080, 1200, 1800, 2700 Ohms.\n",
+					arg, pdata->pins[pin].name, pin);
+				return -EINVAL;
+			}
+
+			bcm281xx_pin_update(val, mask, j+1,
+				BCM281XX_PIN_SHIFT(I2C, PULL_UP_STR),
+				BCM281XX_PIN_MASK(I2C, PULL_UP_STR));
+			break;
+
+		case PIN_CONFIG_BIAS_DISABLE:
+			bcm281xx_pin_update(val, mask, 0,
+				BCM281XX_PIN_SHIFT(I2C, PULL_UP_STR),
+				BCM281XX_PIN_MASK(I2C, PULL_UP_STR));
+			break;
+
+		case PIN_CONFIG_SLEW_RATE:
+			arg = (arg >= 1 ? 1 : 0);
+			bcm281xx_pin_update(val, mask, arg,
+				BCM281XX_PIN_SHIFT(I2C, SLEW),
+				BCM281XX_PIN_MASK(I2C, SLEW));
+			break;
+
+		case PIN_CONFIG_INPUT_ENABLE:
+			/* inversed since register is for input _disable_ */
+			arg = (arg >= 1 ? 0 : 1);
+			bcm281xx_pin_update(val, mask, arg,
+				BCM281XX_PIN_SHIFT(I2C, INPUT_DIS),
+				BCM281XX_PIN_MASK(I2C, INPUT_DIS));
+			break;
+
+		default:
+			dev_err(pctldev->dev,
+				"Unrecognized pin config %d for pin %s (%d).\n",
+				param, pdata->pins[pin].name, pin);
+			return -EINVAL;
+
+		} /* switch config */
+	} /* for each config */
+
+	return 0;
+}
+
+/* Goes through the configs and update register val/mask */
+static int bcm281xx_hdmi_pin_update(struct pinctrl_dev *pctldev,
+				    unsigned pin,
+				    unsigned long *configs,
+				    unsigned num_configs,
+				    u32 *val,
+				    u32 *mask)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+	int i;
+	enum pin_config_param param;
+	u16 arg;
+
+	for (i = 0; i < num_configs; i++) {
+		param = pinconf_to_config_param(configs[i]);
+		arg = pinconf_to_config_argument(configs[i]);
+
+		switch (param) {
+		case PIN_CONFIG_SLEW_RATE:
+			arg = (arg >= 1 ? 1 : 0);
+			bcm281xx_pin_update(val, mask, arg,
+				BCM281XX_PIN_SHIFT(HDMI, MODE),
+				BCM281XX_PIN_MASK(HDMI, MODE));
+			break;
+
+		case PIN_CONFIG_INPUT_ENABLE:
+			/* inversed since register is for input _disable_ */
+			arg = (arg >= 1 ? 0 : 1);
+			bcm281xx_pin_update(val, mask, arg,
+				BCM281XX_PIN_SHIFT(HDMI, INPUT_DIS),
+				BCM281XX_PIN_MASK(HDMI, INPUT_DIS));
+			break;
+
+		default:
+			dev_err(pctldev->dev,
+				"Unrecognized pin config %d for pin %s (%d).\n",
+				param, pdata->pins[pin].name, pin);
+			return -EINVAL;
+
+		} /* switch config */
+	} /* for each config */
+
+	return 0;
+}
+
+static int bcm281xx_pinctrl_pin_config_set(struct pinctrl_dev *pctldev,
+					   unsigned pin,
+					   unsigned long *configs,
+					   unsigned num_configs)
+{
+	struct bcm281xx_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
+	enum bcm281xx_pin_type pin_type;
+	u32 offset = 4 * pin;
+	u32 cfg_val, cfg_mask;
+	int rc;
+
+	cfg_val = 0;
+	cfg_mask = 0;
+	pin_type = pin_type_get(pctldev, pin);
+
+	/* Different pins have different configuration options */
+	switch (pin_type) {
+	case BCM281XX_PIN_TYPE_STD:
+		rc = bcm281xx_std_pin_update(pctldev, pin, configs,
+			num_configs, &cfg_val, &cfg_mask);
+		break;
+
+	case BCM281XX_PIN_TYPE_I2C:
+		rc = bcm281xx_i2c_pin_update(pctldev, pin, configs,
+			num_configs, &cfg_val, &cfg_mask);
+		break;
+
+	case BCM281XX_PIN_TYPE_HDMI:
+		rc = bcm281xx_hdmi_pin_update(pctldev, pin, configs,
+			num_configs, &cfg_val, &cfg_mask);
+		break;
+
+	default:
+		dev_err(pctldev->dev, "Unknown pin type for pin %s (%d).\n",
+			pdata->pins[pin].name, pin);
+		return -EINVAL;
+
+	} /* switch pin type */
+
+	if (rc)
+		return rc;
+
+	dev_dbg(pctldev->dev,
+		"%s(): Set pin %s (%d) with config 0x%x, mask 0x%x\n",
+		__func__, pdata->pins[pin].name, pin, cfg_val, cfg_mask);
+
+	rc = regmap_update_bits(pdata->regmap, offset, cfg_mask, cfg_val);
+	if (rc) {
+		dev_err(pctldev->dev,
+			"Error updating register for pin %s (%d).\n",
+			pdata->pins[pin].name, pin);
+		return rc;
+	}
+
+	return 0;
+}
+
+static struct pinconf_ops bcm281xx_pinctrl_pinconf_ops = {
+	.pin_config_get = bcm281xx_pinctrl_pin_config_get,
+	.pin_config_set = bcm281xx_pinctrl_pin_config_set,
+};
+
+static struct pinctrl_desc bcm281xx_pinctrl_desc = {
+	/* name, pins, npins members initialized in probe function */
+	.pctlops = &bcm281xx_pinctrl_ops,
+	.pmxops = &bcm281xx_pinctrl_pinmux_ops,
+	.confops = &bcm281xx_pinctrl_pinconf_ops,
+	.owner = THIS_MODULE,
+};
+
+int __init bcm281xx_pinctrl_probe(struct platform_device *pdev)
+{
+	struct bcm281xx_pinctrl_data *pdata = &bcm281xx_pinctrl;
+	struct resource *res;
+	struct pinctrl_dev *pctl;
+
+	/* So far We can assume there is only 1 bank of registers */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Missing MEM resource\n");
+		return -ENODEV;
+	}
+
+	pdata->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(pdata->reg_base)) {
+		dev_err(&pdev->dev, "Failed to ioremap MEM resource\n");
+		return -ENODEV;
+	}
+
+	/* Initialize the dynamic part of pinctrl_desc */
+	pdata->regmap = devm_regmap_init_mmio(&pdev->dev, pdata->reg_base,
+		&bcm281xx_pinctrl_regmap_config);
+	if (IS_ERR(pdata->regmap)) {
+		dev_err(&pdev->dev, "Regmap MMIO init failed.\n");
+		return -ENODEV;
+	}
+
+	bcm281xx_pinctrl_desc.name = dev_name(&pdev->dev);
+	bcm281xx_pinctrl_desc.pins = bcm281xx_pinctrl.pins;
+	bcm281xx_pinctrl_desc.npins = bcm281xx_pinctrl.npins;
+
+	pctl = pinctrl_register(&bcm281xx_pinctrl_desc,
+				&pdev->dev,
+				pdata);
+	if (!pctl) {
+		dev_err(&pdev->dev, "Failed to register pinctrl\n");
+		return -ENODEV;
+	}
+
+	platform_set_drvdata(pdev, pdata);
+
+	return 0;
+}
+
+static struct of_device_id bcm281xx_pinctrl_of_match[] = {
+	{ .compatible = "brcm,bcm11351-pinctrl", },
+	{ },
+};
+
+static struct platform_driver bcm281xx_pinctrl_driver = {
+	.driver = {
+		.name = "bcm281xx-pinctrl",
+		.owner = THIS_MODULE,
+		.of_match_table = bcm281xx_pinctrl_of_match,
+	},
+};
+
+module_platform_driver_probe(bcm281xx_pinctrl_driver, bcm281xx_pinctrl_probe);
+
+MODULE_AUTHOR("Broadcom Corporation <bcm-kernel-feedback-list@broadcom.com>");
+MODULE_AUTHOR("Sherman Yin <syin@broadcom.com>");
+MODULE_DESCRIPTION("Broadcom BCM281xx pinctrl driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/pinctrl-capri.c b/drivers/pinctrl/pinctrl-capri.c
deleted file mode 100644
index eb2500212147..000000000000
--- a/drivers/pinctrl/pinctrl-capri.c
+++ /dev/null
@@ -1,1454 +0,0 @@
-/*
- * Copyright (C) 2013 Broadcom Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/pinctrl/pinctrl.h>
-#include <linux/pinctrl/pinmux.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinconf-generic.h>
-#include <linux/regmap.h>
-#include <linux/slab.h>
-#include "core.h"
-#include "pinctrl-utils.h"
-
-/* Capri Pin Control Registers Definitions */
-
-/* Function Select bits are the same for all pin control registers */
-#define CAPRI_PIN_REG_F_SEL_MASK		0x0700
-#define CAPRI_PIN_REG_F_SEL_SHIFT		8
-
-/* Standard pin register */
-#define CAPRI_STD_PIN_REG_DRV_STR_MASK		0x0007
-#define CAPRI_STD_PIN_REG_DRV_STR_SHIFT		0
-#define CAPRI_STD_PIN_REG_INPUT_DIS_MASK	0x0008
-#define CAPRI_STD_PIN_REG_INPUT_DIS_SHIFT	3
-#define CAPRI_STD_PIN_REG_SLEW_MASK		0x0010
-#define CAPRI_STD_PIN_REG_SLEW_SHIFT		4
-#define CAPRI_STD_PIN_REG_PULL_UP_MASK		0x0020
-#define CAPRI_STD_PIN_REG_PULL_UP_SHIFT		5
-#define CAPRI_STD_PIN_REG_PULL_DN_MASK		0x0040
-#define CAPRI_STD_PIN_REG_PULL_DN_SHIFT		6
-#define CAPRI_STD_PIN_REG_HYST_MASK		0x0080
-#define CAPRI_STD_PIN_REG_HYST_SHIFT		7
-
-/* I2C pin register */
-#define CAPRI_I2C_PIN_REG_INPUT_DIS_MASK	0x0004
-#define CAPRI_I2C_PIN_REG_INPUT_DIS_SHIFT	2
-#define CAPRI_I2C_PIN_REG_SLEW_MASK		0x0008
-#define CAPRI_I2C_PIN_REG_SLEW_SHIFT		3
-#define CAPRI_I2C_PIN_REG_PULL_UP_STR_MASK	0x0070
-#define CAPRI_I2C_PIN_REG_PULL_UP_STR_SHIFT	4
-
-/* HDMI pin register */
-#define CAPRI_HDMI_PIN_REG_INPUT_DIS_MASK	0x0008
-#define CAPRI_HDMI_PIN_REG_INPUT_DIS_SHIFT	3
-#define CAPRI_HDMI_PIN_REG_MODE_MASK		0x0010
-#define CAPRI_HDMI_PIN_REG_MODE_SHIFT		4
-
-/**
- * capri_pin_type - types of pin register
- */
-enum capri_pin_type {
-	CAPRI_PIN_TYPE_UNKNOWN = 0,
-	CAPRI_PIN_TYPE_STD,
-	CAPRI_PIN_TYPE_I2C,
-	CAPRI_PIN_TYPE_HDMI,
-};
-
-static enum capri_pin_type std_pin = CAPRI_PIN_TYPE_STD;
-static enum capri_pin_type i2c_pin = CAPRI_PIN_TYPE_I2C;
-static enum capri_pin_type hdmi_pin = CAPRI_PIN_TYPE_HDMI;
-
-/**
- * capri_pin_function- define pin function
- */
-struct capri_pin_function {
-	const char *name;
-	const char * const *groups;
-	const unsigned ngroups;
-};
-
-/**
- * capri_pinctrl_data - Broadcom-specific pinctrl data
- * @reg_base - base of pinctrl registers
- */
-struct capri_pinctrl_data {
-	void __iomem *reg_base;
-
-	/* List of all pins */
-	const struct pinctrl_pin_desc *pins;
-	const unsigned npins;
-
-	const struct capri_pin_function *functions;
-	const unsigned nfunctions;
-
-	struct regmap *regmap;
-};
-
-/*
- * Pin number definition.  The order here must be the same as defined in the
- * PADCTRLREG block in the RDB.
- */
-#define CAPRI_PIN_ADCSYNC		0
-#define CAPRI_PIN_BAT_RM		1
-#define CAPRI_PIN_BSC1_SCL		2
-#define CAPRI_PIN_BSC1_SDA		3
-#define CAPRI_PIN_BSC2_SCL		4
-#define CAPRI_PIN_BSC2_SDA		5
-#define CAPRI_PIN_CLASSGPWR		6
-#define CAPRI_PIN_CLK_CX8		7
-#define CAPRI_PIN_CLKOUT_0		8
-#define CAPRI_PIN_CLKOUT_1		9
-#define CAPRI_PIN_CLKOUT_2		10
-#define CAPRI_PIN_CLKOUT_3		11
-#define CAPRI_PIN_CLKREQ_IN_0		12
-#define CAPRI_PIN_CLKREQ_IN_1		13
-#define CAPRI_PIN_CWS_SYS_REQ1		14
-#define CAPRI_PIN_CWS_SYS_REQ2		15
-#define CAPRI_PIN_CWS_SYS_REQ3		16
-#define CAPRI_PIN_DIGMIC1_CLK		17
-#define CAPRI_PIN_DIGMIC1_DQ		18
-#define CAPRI_PIN_DIGMIC2_CLK		19
-#define CAPRI_PIN_DIGMIC2_DQ		20
-#define CAPRI_PIN_GPEN13		21
-#define CAPRI_PIN_GPEN14		22
-#define CAPRI_PIN_GPEN15		23
-#define CAPRI_PIN_GPIO00		24
-#define CAPRI_PIN_GPIO01		25
-#define CAPRI_PIN_GPIO02		26
-#define CAPRI_PIN_GPIO03		27
-#define CAPRI_PIN_GPIO04		28
-#define CAPRI_PIN_GPIO05		29
-#define CAPRI_PIN_GPIO06		30
-#define CAPRI_PIN_GPIO07		31
-#define CAPRI_PIN_GPIO08		32
-#define CAPRI_PIN_GPIO09		33
-#define CAPRI_PIN_GPIO10		34
-#define CAPRI_PIN_GPIO11		35
-#define CAPRI_PIN_GPIO12		36
-#define CAPRI_PIN_GPIO13		37
-#define CAPRI_PIN_GPIO14		38
-#define CAPRI_PIN_GPS_PABLANK		39
-#define CAPRI_PIN_GPS_TMARK		40
-#define CAPRI_PIN_HDMI_SCL		41
-#define CAPRI_PIN_HDMI_SDA		42
-#define CAPRI_PIN_IC_DM			43
-#define CAPRI_PIN_IC_DP			44
-#define CAPRI_PIN_KP_COL_IP_0		45
-#define CAPRI_PIN_KP_COL_IP_1		46
-#define CAPRI_PIN_KP_COL_IP_2		47
-#define CAPRI_PIN_KP_COL_IP_3		48
-#define CAPRI_PIN_KP_ROW_OP_0		49
-#define CAPRI_PIN_KP_ROW_OP_1		50
-#define CAPRI_PIN_KP_ROW_OP_2		51
-#define CAPRI_PIN_KP_ROW_OP_3		52
-#define CAPRI_PIN_LCD_B_0		53
-#define CAPRI_PIN_LCD_B_1		54
-#define CAPRI_PIN_LCD_B_2		55
-#define CAPRI_PIN_LCD_B_3		56
-#define CAPRI_PIN_LCD_B_4		57
-#define CAPRI_PIN_LCD_B_5		58
-#define CAPRI_PIN_LCD_B_6		59
-#define CAPRI_PIN_LCD_B_7		60
-#define CAPRI_PIN_LCD_G_0		61
-#define CAPRI_PIN_LCD_G_1		62
-#define CAPRI_PIN_LCD_G_2		63
-#define CAPRI_PIN_LCD_G_3		64
-#define CAPRI_PIN_LCD_G_4		65
-#define CAPRI_PIN_LCD_G_5		66
-#define CAPRI_PIN_LCD_G_6		67
-#define CAPRI_PIN_LCD_G_7		68
-#define CAPRI_PIN_LCD_HSYNC		69
-#define CAPRI_PIN_LCD_OE		70
-#define CAPRI_PIN_LCD_PCLK		71
-#define CAPRI_PIN_LCD_R_0		72
-#define CAPRI_PIN_LCD_R_1		73
-#define CAPRI_PIN_LCD_R_2		74
-#define CAPRI_PIN_LCD_R_3		75
-#define CAPRI_PIN_LCD_R_4		76
-#define CAPRI_PIN_LCD_R_5		77
-#define CAPRI_PIN_LCD_R_6		78
-#define CAPRI_PIN_LCD_R_7		79
-#define CAPRI_PIN_LCD_VSYNC		80
-#define CAPRI_PIN_MDMGPIO0		81
-#define CAPRI_PIN_MDMGPIO1		82
-#define CAPRI_PIN_MDMGPIO2		83
-#define CAPRI_PIN_MDMGPIO3		84
-#define CAPRI_PIN_MDMGPIO4		85
-#define CAPRI_PIN_MDMGPIO5		86
-#define CAPRI_PIN_MDMGPIO6		87
-#define CAPRI_PIN_MDMGPIO7		88
-#define CAPRI_PIN_MDMGPIO8		89
-#define CAPRI_PIN_MPHI_DATA_0		90
-#define CAPRI_PIN_MPHI_DATA_1		91
-#define CAPRI_PIN_MPHI_DATA_2		92
-#define CAPRI_PIN_MPHI_DATA_3		93
-#define CAPRI_PIN_MPHI_DATA_4		94
-#define CAPRI_PIN_MPHI_DATA_5		95
-#define CAPRI_PIN_MPHI_DATA_6		96
-#define CAPRI_PIN_MPHI_DATA_7		97
-#define CAPRI_PIN_MPHI_DATA_8		98
-#define CAPRI_PIN_MPHI_DATA_9		99
-#define CAPRI_PIN_MPHI_DATA_10		100
-#define CAPRI_PIN_MPHI_DATA_11		101
-#define CAPRI_PIN_MPHI_DATA_12		102
-#define CAPRI_PIN_MPHI_DATA_13		103
-#define CAPRI_PIN_MPHI_DATA_14		104
-#define CAPRI_PIN_MPHI_DATA_15		105
-#define CAPRI_PIN_MPHI_HA0		106
-#define CAPRI_PIN_MPHI_HAT0		107
-#define CAPRI_PIN_MPHI_HAT1		108
-#define CAPRI_PIN_MPHI_HCE0_N		109
-#define CAPRI_PIN_MPHI_HCE1_N		110
-#define CAPRI_PIN_MPHI_HRD_N		111
-#define CAPRI_PIN_MPHI_HWR_N		112
-#define CAPRI_PIN_MPHI_RUN0		113
-#define CAPRI_PIN_MPHI_RUN1		114
-#define CAPRI_PIN_MTX_SCAN_CLK		115
-#define CAPRI_PIN_MTX_SCAN_DATA		116
-#define CAPRI_PIN_NAND_AD_0		117
-#define CAPRI_PIN_NAND_AD_1		118
-#define CAPRI_PIN_NAND_AD_2		119
-#define CAPRI_PIN_NAND_AD_3		120
-#define CAPRI_PIN_NAND_AD_4		121
-#define CAPRI_PIN_NAND_AD_5		122
-#define CAPRI_PIN_NAND_AD_6		123
-#define CAPRI_PIN_NAND_AD_7		124
-#define CAPRI_PIN_NAND_ALE		125
-#define CAPRI_PIN_NAND_CEN_0		126
-#define CAPRI_PIN_NAND_CEN_1		127
-#define CAPRI_PIN_NAND_CLE		128
-#define CAPRI_PIN_NAND_OEN		129
-#define CAPRI_PIN_NAND_RDY_0		130
-#define CAPRI_PIN_NAND_RDY_1		131
-#define CAPRI_PIN_NAND_WEN		132
-#define CAPRI_PIN_NAND_WP		133
-#define CAPRI_PIN_PC1			134
-#define CAPRI_PIN_PC2			135
-#define CAPRI_PIN_PMU_INT		136
-#define CAPRI_PIN_PMU_SCL		137
-#define CAPRI_PIN_PMU_SDA		138
-#define CAPRI_PIN_RFST2G_MTSLOTEN3G	139
-#define CAPRI_PIN_RGMII_0_RX_CTL	140
-#define CAPRI_PIN_RGMII_0_RXC		141
-#define CAPRI_PIN_RGMII_0_RXD_0		142
-#define CAPRI_PIN_RGMII_0_RXD_1		143
-#define CAPRI_PIN_RGMII_0_RXD_2		144
-#define CAPRI_PIN_RGMII_0_RXD_3		145
-#define CAPRI_PIN_RGMII_0_TX_CTL	146
-#define CAPRI_PIN_RGMII_0_TXC		147
-#define CAPRI_PIN_RGMII_0_TXD_0		148
-#define CAPRI_PIN_RGMII_0_TXD_1		149
-#define CAPRI_PIN_RGMII_0_TXD_2		150
-#define CAPRI_PIN_RGMII_0_TXD_3		151
-#define CAPRI_PIN_RGMII_1_RX_CTL	152
-#define CAPRI_PIN_RGMII_1_RXC		153
-#define CAPRI_PIN_RGMII_1_RXD_0		154
-#define CAPRI_PIN_RGMII_1_RXD_1		155
-#define CAPRI_PIN_RGMII_1_RXD_2		156
-#define CAPRI_PIN_RGMII_1_RXD_3		157
-#define CAPRI_PIN_RGMII_1_TX_CTL	158
-#define CAPRI_PIN_RGMII_1_TXC		159
-#define CAPRI_PIN_RGMII_1_TXD_0		160
-#define CAPRI_PIN_RGMII_1_TXD_1		161
-#define CAPRI_PIN_RGMII_1_TXD_2		162
-#define CAPRI_PIN_RGMII_1_TXD_3		163
-#define CAPRI_PIN_RGMII_GPIO_0		164
-#define CAPRI_PIN_RGMII_GPIO_1		165
-#define CAPRI_PIN_RGMII_GPIO_2		166
-#define CAPRI_PIN_RGMII_GPIO_3		167
-#define CAPRI_PIN_RTXDATA2G_TXDATA3G1	168
-#define CAPRI_PIN_RTXEN2G_TXDATA3G2	169
-#define CAPRI_PIN_RXDATA3G0		170
-#define CAPRI_PIN_RXDATA3G1		171
-#define CAPRI_PIN_RXDATA3G2		172
-#define CAPRI_PIN_SDIO1_CLK		173
-#define CAPRI_PIN_SDIO1_CMD		174
-#define CAPRI_PIN_SDIO1_DATA_0		175
-#define CAPRI_PIN_SDIO1_DATA_1		176
-#define CAPRI_PIN_SDIO1_DATA_2		177
-#define CAPRI_PIN_SDIO1_DATA_3		178
-#define CAPRI_PIN_SDIO4_CLK		179
-#define CAPRI_PIN_SDIO4_CMD		180
-#define CAPRI_PIN_SDIO4_DATA_0		181
-#define CAPRI_PIN_SDIO4_DATA_1		182
-#define CAPRI_PIN_SDIO4_DATA_2		183
-#define CAPRI_PIN_SDIO4_DATA_3		184
-#define CAPRI_PIN_SIM_CLK		185
-#define CAPRI_PIN_SIM_DATA		186
-#define CAPRI_PIN_SIM_DET		187
-#define CAPRI_PIN_SIM_RESETN		188
-#define CAPRI_PIN_SIM2_CLK		189
-#define CAPRI_PIN_SIM2_DATA		190
-#define CAPRI_PIN_SIM2_DET		191
-#define CAPRI_PIN_SIM2_RESETN		192
-#define CAPRI_PIN_SRI_C			193
-#define CAPRI_PIN_SRI_D			194
-#define CAPRI_PIN_SRI_E			195
-#define CAPRI_PIN_SSP_EXTCLK		196
-#define CAPRI_PIN_SSP0_CLK		197
-#define CAPRI_PIN_SSP0_FS		198
-#define CAPRI_PIN_SSP0_RXD		199
-#define CAPRI_PIN_SSP0_TXD		200
-#define CAPRI_PIN_SSP2_CLK		201
-#define CAPRI_PIN_SSP2_FS_0		202
-#define CAPRI_PIN_SSP2_FS_1		203
-#define CAPRI_PIN_SSP2_FS_2		204
-#define CAPRI_PIN_SSP2_FS_3		205
-#define CAPRI_PIN_SSP2_RXD_0		206
-#define CAPRI_PIN_SSP2_RXD_1		207
-#define CAPRI_PIN_SSP2_TXD_0		208
-#define CAPRI_PIN_SSP2_TXD_1		209
-#define CAPRI_PIN_SSP3_CLK		210
-#define CAPRI_PIN_SSP3_FS		211
-#define CAPRI_PIN_SSP3_RXD		212
-#define CAPRI_PIN_SSP3_TXD		213
-#define CAPRI_PIN_SSP4_CLK		214
-#define CAPRI_PIN_SSP4_FS		215
-#define CAPRI_PIN_SSP4_RXD		216
-#define CAPRI_PIN_SSP4_TXD		217
-#define CAPRI_PIN_SSP5_CLK		218
-#define CAPRI_PIN_SSP5_FS		219
-#define CAPRI_PIN_SSP5_RXD		220
-#define CAPRI_PIN_SSP5_TXD		221
-#define CAPRI_PIN_SSP6_CLK		222
-#define CAPRI_PIN_SSP6_FS		223
-#define CAPRI_PIN_SSP6_RXD		224
-#define CAPRI_PIN_SSP6_TXD		225
-#define CAPRI_PIN_STAT_1		226
-#define CAPRI_PIN_STAT_2		227
-#define CAPRI_PIN_SYSCLKEN		228
-#define CAPRI_PIN_TRACECLK		229
-#define CAPRI_PIN_TRACEDT00		230
-#define CAPRI_PIN_TRACEDT01		231
-#define CAPRI_PIN_TRACEDT02		232
-#define CAPRI_PIN_TRACEDT03		233
-#define CAPRI_PIN_TRACEDT04		234
-#define CAPRI_PIN_TRACEDT05		235
-#define CAPRI_PIN_TRACEDT06		236
-#define CAPRI_PIN_TRACEDT07		237
-#define CAPRI_PIN_TRACEDT08		238
-#define CAPRI_PIN_TRACEDT09		239
-#define CAPRI_PIN_TRACEDT10		240
-#define CAPRI_PIN_TRACEDT11		241
-#define CAPRI_PIN_TRACEDT12		242
-#define CAPRI_PIN_TRACEDT13		243
-#define CAPRI_PIN_TRACEDT14		244
-#define CAPRI_PIN_TRACEDT15		245
-#define CAPRI_PIN_TXDATA3G0		246
-#define CAPRI_PIN_TXPWRIND		247
-#define CAPRI_PIN_UARTB1_UCTS		248
-#define CAPRI_PIN_UARTB1_URTS		249
-#define CAPRI_PIN_UARTB1_URXD		250
-#define CAPRI_PIN_UARTB1_UTXD		251
-#define CAPRI_PIN_UARTB2_URXD		252
-#define CAPRI_PIN_UARTB2_UTXD		253
-#define CAPRI_PIN_UARTB3_UCTS		254
-#define CAPRI_PIN_UARTB3_URTS		255
-#define CAPRI_PIN_UARTB3_URXD		256
-#define CAPRI_PIN_UARTB3_UTXD		257
-#define CAPRI_PIN_UARTB4_UCTS		258
-#define CAPRI_PIN_UARTB4_URTS		259
-#define CAPRI_PIN_UARTB4_URXD		260
-#define CAPRI_PIN_UARTB4_UTXD		261
-#define CAPRI_PIN_VC_CAM1_SCL		262
-#define CAPRI_PIN_VC_CAM1_SDA		263
-#define CAPRI_PIN_VC_CAM2_SCL		264
-#define CAPRI_PIN_VC_CAM2_SDA		265
-#define CAPRI_PIN_VC_CAM3_SCL		266
-#define CAPRI_PIN_VC_CAM3_SDA		267
-
-#define CAPRI_PIN_DESC(a, b, c) \
-	{ .number = a, .name = b, .drv_data = &c##_pin }
-
-/*
- * Pin description definition.  The order here must be the same as defined in
- * the PADCTRLREG block in the RDB, since the pin number is used as an index
- * into this array.
- */
-static const struct pinctrl_pin_desc capri_pinctrl_pins[] = {
-	CAPRI_PIN_DESC(CAPRI_PIN_ADCSYNC, "adcsync", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_BAT_RM, "bat_rm", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_BSC1_SCL, "bsc1_scl", i2c),
-	CAPRI_PIN_DESC(CAPRI_PIN_BSC1_SDA, "bsc1_sda", i2c),
-	CAPRI_PIN_DESC(CAPRI_PIN_BSC2_SCL, "bsc2_scl", i2c),
-	CAPRI_PIN_DESC(CAPRI_PIN_BSC2_SDA, "bsc2_sda", i2c),
-	CAPRI_PIN_DESC(CAPRI_PIN_CLASSGPWR, "classgpwr", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_CLK_CX8, "clk_cx8", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_CLKOUT_0, "clkout_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_CLKOUT_1, "clkout_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_CLKOUT_2, "clkout_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_CLKOUT_3, "clkout_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_CLKREQ_IN_0, "clkreq_in_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_CLKREQ_IN_1, "clkreq_in_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_CWS_SYS_REQ1, "cws_sys_req1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_CWS_SYS_REQ2, "cws_sys_req2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_CWS_SYS_REQ3, "cws_sys_req3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_DIGMIC1_CLK, "digmic1_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_DIGMIC1_DQ, "digmic1_dq", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_DIGMIC2_CLK, "digmic2_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_DIGMIC2_DQ, "digmic2_dq", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPEN13, "gpen13", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPEN14, "gpen14", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPEN15, "gpen15", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO00, "gpio00", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO01, "gpio01", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO02, "gpio02", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO03, "gpio03", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO04, "gpio04", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO05, "gpio05", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO06, "gpio06", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO07, "gpio07", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO08, "gpio08", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO09, "gpio09", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO10, "gpio10", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO11, "gpio11", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO12, "gpio12", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO13, "gpio13", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPIO14, "gpio14", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPS_PABLANK, "gps_pablank", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_GPS_TMARK, "gps_tmark", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_HDMI_SCL, "hdmi_scl", hdmi),
-	CAPRI_PIN_DESC(CAPRI_PIN_HDMI_SDA, "hdmi_sda", hdmi),
-	CAPRI_PIN_DESC(CAPRI_PIN_IC_DM, "ic_dm", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_IC_DP, "ic_dp", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_KP_COL_IP_0, "kp_col_ip_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_KP_COL_IP_1, "kp_col_ip_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_KP_COL_IP_2, "kp_col_ip_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_KP_COL_IP_3, "kp_col_ip_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_KP_ROW_OP_0, "kp_row_op_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_KP_ROW_OP_1, "kp_row_op_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_KP_ROW_OP_2, "kp_row_op_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_KP_ROW_OP_3, "kp_row_op_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_B_0, "lcd_b_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_B_1, "lcd_b_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_B_2, "lcd_b_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_B_3, "lcd_b_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_B_4, "lcd_b_4", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_B_5, "lcd_b_5", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_B_6, "lcd_b_6", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_B_7, "lcd_b_7", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_G_0, "lcd_g_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_G_1, "lcd_g_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_G_2, "lcd_g_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_G_3, "lcd_g_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_G_4, "lcd_g_4", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_G_5, "lcd_g_5", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_G_6, "lcd_g_6", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_G_7, "lcd_g_7", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_HSYNC, "lcd_hsync", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_OE, "lcd_oe", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_PCLK, "lcd_pclk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_R_0, "lcd_r_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_R_1, "lcd_r_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_R_2, "lcd_r_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_R_3, "lcd_r_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_R_4, "lcd_r_4", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_R_5, "lcd_r_5", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_R_6, "lcd_r_6", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_R_7, "lcd_r_7", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_LCD_VSYNC, "lcd_vsync", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MDMGPIO0, "mdmgpio0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MDMGPIO1, "mdmgpio1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MDMGPIO2, "mdmgpio2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MDMGPIO3, "mdmgpio3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MDMGPIO4, "mdmgpio4", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MDMGPIO5, "mdmgpio5", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MDMGPIO6, "mdmgpio6", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MDMGPIO7, "mdmgpio7", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MDMGPIO8, "mdmgpio8", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_0, "mphi_data_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_1, "mphi_data_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_2, "mphi_data_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_3, "mphi_data_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_4, "mphi_data_4", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_5, "mphi_data_5", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_6, "mphi_data_6", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_7, "mphi_data_7", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_8, "mphi_data_8", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_9, "mphi_data_9", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_10, "mphi_data_10", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_11, "mphi_data_11", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_12, "mphi_data_12", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_13, "mphi_data_13", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_14, "mphi_data_14", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_DATA_15, "mphi_data_15", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_HA0, "mphi_ha0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_HAT0, "mphi_hat0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_HAT1, "mphi_hat1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_HCE0_N, "mphi_hce0_n", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_HCE1_N, "mphi_hce1_n", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_HRD_N, "mphi_hrd_n", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_HWR_N, "mphi_hwr_n", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_RUN0, "mphi_run0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MPHI_RUN1, "mphi_run1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MTX_SCAN_CLK, "mtx_scan_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_MTX_SCAN_DATA, "mtx_scan_data", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_AD_0, "nand_ad_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_AD_1, "nand_ad_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_AD_2, "nand_ad_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_AD_3, "nand_ad_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_AD_4, "nand_ad_4", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_AD_5, "nand_ad_5", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_AD_6, "nand_ad_6", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_AD_7, "nand_ad_7", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_ALE, "nand_ale", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_CEN_0, "nand_cen_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_CEN_1, "nand_cen_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_CLE, "nand_cle", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_OEN, "nand_oen", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_RDY_0, "nand_rdy_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_RDY_1, "nand_rdy_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_WEN, "nand_wen", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_NAND_WP, "nand_wp", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_PC1, "pc1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_PC2, "pc2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_PMU_INT, "pmu_int", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_PMU_SCL, "pmu_scl", i2c),
-	CAPRI_PIN_DESC(CAPRI_PIN_PMU_SDA, "pmu_sda", i2c),
-	CAPRI_PIN_DESC(CAPRI_PIN_RFST2G_MTSLOTEN3G, "rfst2g_mtsloten3g", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_RX_CTL, "rgmii_0_rx_ctl", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_RXC, "rgmii_0_rxc", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_RXD_0, "rgmii_0_rxd_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_RXD_1, "rgmii_0_rxd_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_RXD_2, "rgmii_0_rxd_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_RXD_3, "rgmii_0_rxd_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_TX_CTL, "rgmii_0_tx_ctl", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_TXC, "rgmii_0_txc", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_TXD_0, "rgmii_0_txd_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_TXD_1, "rgmii_0_txd_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_TXD_2, "rgmii_0_txd_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_0_TXD_3, "rgmii_0_txd_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_RX_CTL, "rgmii_1_rx_ctl", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_RXC, "rgmii_1_rxc", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_RXD_0, "rgmii_1_rxd_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_RXD_1, "rgmii_1_rxd_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_RXD_2, "rgmii_1_rxd_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_RXD_3, "rgmii_1_rxd_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_TX_CTL, "rgmii_1_tx_ctl", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_TXC, "rgmii_1_txc", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_TXD_0, "rgmii_1_txd_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_TXD_1, "rgmii_1_txd_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_TXD_2, "rgmii_1_txd_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_1_TXD_3, "rgmii_1_txd_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_GPIO_0, "rgmii_gpio_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_GPIO_1, "rgmii_gpio_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_GPIO_2, "rgmii_gpio_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RGMII_GPIO_3, "rgmii_gpio_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RTXDATA2G_TXDATA3G1, "rtxdata2g_txdata3g1",
-		std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RTXEN2G_TXDATA3G2, "rtxen2g_txdata3g2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RXDATA3G0, "rxdata3g0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RXDATA3G1, "rxdata3g1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_RXDATA3G2, "rxdata3g2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO1_CLK, "sdio1_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO1_CMD, "sdio1_cmd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO1_DATA_0, "sdio1_data_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO1_DATA_1, "sdio1_data_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO1_DATA_2, "sdio1_data_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO1_DATA_3, "sdio1_data_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO4_CLK, "sdio4_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO4_CMD, "sdio4_cmd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO4_DATA_0, "sdio4_data_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO4_DATA_1, "sdio4_data_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO4_DATA_2, "sdio4_data_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SDIO4_DATA_3, "sdio4_data_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SIM_CLK, "sim_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SIM_DATA, "sim_data", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SIM_DET, "sim_det", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SIM_RESETN, "sim_resetn", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SIM2_CLK, "sim2_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SIM2_DATA, "sim2_data", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SIM2_DET, "sim2_det", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SIM2_RESETN, "sim2_resetn", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SRI_C, "sri_c", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SRI_D, "sri_d", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SRI_E, "sri_e", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP_EXTCLK, "ssp_extclk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP0_CLK, "ssp0_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP0_FS, "ssp0_fs", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP0_RXD, "ssp0_rxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP0_TXD, "ssp0_txd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP2_CLK, "ssp2_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP2_FS_0, "ssp2_fs_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP2_FS_1, "ssp2_fs_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP2_FS_2, "ssp2_fs_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP2_FS_3, "ssp2_fs_3", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP2_RXD_0, "ssp2_rxd_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP2_RXD_1, "ssp2_rxd_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP2_TXD_0, "ssp2_txd_0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP2_TXD_1, "ssp2_txd_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP3_CLK, "ssp3_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP3_FS, "ssp3_fs", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP3_RXD, "ssp3_rxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP3_TXD, "ssp3_txd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP4_CLK, "ssp4_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP4_FS, "ssp4_fs", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP4_RXD, "ssp4_rxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP4_TXD, "ssp4_txd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP5_CLK, "ssp5_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP5_FS, "ssp5_fs", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP5_RXD, "ssp5_rxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP5_TXD, "ssp5_txd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP6_CLK, "ssp6_clk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP6_FS, "ssp6_fs", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP6_RXD, "ssp6_rxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SSP6_TXD, "ssp6_txd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_STAT_1, "stat_1", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_STAT_2, "stat_2", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_SYSCLKEN, "sysclken", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACECLK, "traceclk", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT00, "tracedt00", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT01, "tracedt01", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT02, "tracedt02", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT03, "tracedt03", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT04, "tracedt04", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT05, "tracedt05", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT06, "tracedt06", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT07, "tracedt07", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT08, "tracedt08", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT09, "tracedt09", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT10, "tracedt10", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT11, "tracedt11", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT12, "tracedt12", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT13, "tracedt13", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT14, "tracedt14", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TRACEDT15, "tracedt15", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TXDATA3G0, "txdata3g0", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_TXPWRIND, "txpwrind", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB1_UCTS, "uartb1_ucts", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB1_URTS, "uartb1_urts", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB1_URXD, "uartb1_urxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB1_UTXD, "uartb1_utxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB2_URXD, "uartb2_urxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB2_UTXD, "uartb2_utxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB3_UCTS, "uartb3_ucts", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB3_URTS, "uartb3_urts", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB3_URXD, "uartb3_urxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB3_UTXD, "uartb3_utxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB4_UCTS, "uartb4_ucts", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB4_URTS, "uartb4_urts", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB4_URXD, "uartb4_urxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_UARTB4_UTXD, "uartb4_utxd", std),
-	CAPRI_PIN_DESC(CAPRI_PIN_VC_CAM1_SCL, "vc_cam1_scl", i2c),
-	CAPRI_PIN_DESC(CAPRI_PIN_VC_CAM1_SDA, "vc_cam1_sda", i2c),
-	CAPRI_PIN_DESC(CAPRI_PIN_VC_CAM2_SCL, "vc_cam2_scl", i2c),
-	CAPRI_PIN_DESC(CAPRI_PIN_VC_CAM2_SDA, "vc_cam2_sda", i2c),
-	CAPRI_PIN_DESC(CAPRI_PIN_VC_CAM3_SCL, "vc_cam3_scl", i2c),
-	CAPRI_PIN_DESC(CAPRI_PIN_VC_CAM3_SDA, "vc_cam3_sda", i2c),
-};
-
-static const char * const capri_alt_groups[] = {
-	"adcsync",
-	"bat_rm",
-	"bsc1_scl",
-	"bsc1_sda",
-	"bsc2_scl",
-	"bsc2_sda",
-	"classgpwr",
-	"clk_cx8",
-	"clkout_0",
-	"clkout_1",
-	"clkout_2",
-	"clkout_3",
-	"clkreq_in_0",
-	"clkreq_in_1",
-	"cws_sys_req1",
-	"cws_sys_req2",
-	"cws_sys_req3",
-	"digmic1_clk",
-	"digmic1_dq",
-	"digmic2_clk",
-	"digmic2_dq",
-	"gpen13",
-	"gpen14",
-	"gpen15",
-	"gpio00",
-	"gpio01",
-	"gpio02",
-	"gpio03",
-	"gpio04",
-	"gpio05",
-	"gpio06",
-	"gpio07",
-	"gpio08",
-	"gpio09",
-	"gpio10",
-	"gpio11",
-	"gpio12",
-	"gpio13",
-	"gpio14",
-	"gps_pablank",
-	"gps_tmark",
-	"hdmi_scl",
-	"hdmi_sda",
-	"ic_dm",
-	"ic_dp",
-	"kp_col_ip_0",
-	"kp_col_ip_1",
-	"kp_col_ip_2",
-	"kp_col_ip_3",
-	"kp_row_op_0",
-	"kp_row_op_1",
-	"kp_row_op_2",
-	"kp_row_op_3",
-	"lcd_b_0",
-	"lcd_b_1",
-	"lcd_b_2",
-	"lcd_b_3",
-	"lcd_b_4",
-	"lcd_b_5",
-	"lcd_b_6",
-	"lcd_b_7",
-	"lcd_g_0",
-	"lcd_g_1",
-	"lcd_g_2",
-	"lcd_g_3",
-	"lcd_g_4",
-	"lcd_g_5",
-	"lcd_g_6",
-	"lcd_g_7",
-	"lcd_hsync",
-	"lcd_oe",
-	"lcd_pclk",
-	"lcd_r_0",
-	"lcd_r_1",
-	"lcd_r_2",
-	"lcd_r_3",
-	"lcd_r_4",
-	"lcd_r_5",
-	"lcd_r_6",
-	"lcd_r_7",
-	"lcd_vsync",
-	"mdmgpio0",
-	"mdmgpio1",
-	"mdmgpio2",
-	"mdmgpio3",
-	"mdmgpio4",
-	"mdmgpio5",
-	"mdmgpio6",
-	"mdmgpio7",
-	"mdmgpio8",
-	"mphi_data_0",
-	"mphi_data_1",
-	"mphi_data_2",
-	"mphi_data_3",
-	"mphi_data_4",
-	"mphi_data_5",
-	"mphi_data_6",
-	"mphi_data_7",
-	"mphi_data_8",
-	"mphi_data_9",
-	"mphi_data_10",
-	"mphi_data_11",
-	"mphi_data_12",
-	"mphi_data_13",
-	"mphi_data_14",
-	"mphi_data_15",
-	"mphi_ha0",
-	"mphi_hat0",
-	"mphi_hat1",
-	"mphi_hce0_n",
-	"mphi_hce1_n",
-	"mphi_hrd_n",
-	"mphi_hwr_n",
-	"mphi_run0",
-	"mphi_run1",
-	"mtx_scan_clk",
-	"mtx_scan_data",
-	"nand_ad_0",
-	"nand_ad_1",
-	"nand_ad_2",
-	"nand_ad_3",
-	"nand_ad_4",
-	"nand_ad_5",
-	"nand_ad_6",
-	"nand_ad_7",
-	"nand_ale",
-	"nand_cen_0",
-	"nand_cen_1",
-	"nand_cle",
-	"nand_oen",
-	"nand_rdy_0",
-	"nand_rdy_1",
-	"nand_wen",
-	"nand_wp",
-	"pc1",
-	"pc2",
-	"pmu_int",
-	"pmu_scl",
-	"pmu_sda",
-	"rfst2g_mtsloten3g",
-	"rgmii_0_rx_ctl",
-	"rgmii_0_rxc",
-	"rgmii_0_rxd_0",
-	"rgmii_0_rxd_1",
-	"rgmii_0_rxd_2",
-	"rgmii_0_rxd_3",
-	"rgmii_0_tx_ctl",
-	"rgmii_0_txc",
-	"rgmii_0_txd_0",
-	"rgmii_0_txd_1",
-	"rgmii_0_txd_2",
-	"rgmii_0_txd_3",
-	"rgmii_1_rx_ctl",
-	"rgmii_1_rxc",
-	"rgmii_1_rxd_0",
-	"rgmii_1_rxd_1",
-	"rgmii_1_rxd_2",
-	"rgmii_1_rxd_3",
-	"rgmii_1_tx_ctl",
-	"rgmii_1_txc",
-	"rgmii_1_txd_0",
-	"rgmii_1_txd_1",
-	"rgmii_1_txd_2",
-	"rgmii_1_txd_3",
-	"rgmii_gpio_0",
-	"rgmii_gpio_1",
-	"rgmii_gpio_2",
-	"rgmii_gpio_3",
-	"rtxdata2g_txdata3g1",
-	"rtxen2g_txdata3g2",
-	"rxdata3g0",
-	"rxdata3g1",
-	"rxdata3g2",
-	"sdio1_clk",
-	"sdio1_cmd",
-	"sdio1_data_0",
-	"sdio1_data_1",
-	"sdio1_data_2",
-	"sdio1_data_3",
-	"sdio4_clk",
-	"sdio4_cmd",
-	"sdio4_data_0",
-	"sdio4_data_1",
-	"sdio4_data_2",
-	"sdio4_data_3",
-	"sim_clk",
-	"sim_data",
-	"sim_det",
-	"sim_resetn",
-	"sim2_clk",
-	"sim2_data",
-	"sim2_det",
-	"sim2_resetn",
-	"sri_c",
-	"sri_d",
-	"sri_e",
-	"ssp_extclk",
-	"ssp0_clk",
-	"ssp0_fs",
-	"ssp0_rxd",
-	"ssp0_txd",
-	"ssp2_clk",
-	"ssp2_fs_0",
-	"ssp2_fs_1",
-	"ssp2_fs_2",
-	"ssp2_fs_3",
-	"ssp2_rxd_0",
-	"ssp2_rxd_1",
-	"ssp2_txd_0",
-	"ssp2_txd_1",
-	"ssp3_clk",
-	"ssp3_fs",
-	"ssp3_rxd",
-	"ssp3_txd",
-	"ssp4_clk",
-	"ssp4_fs",
-	"ssp4_rxd",
-	"ssp4_txd",
-	"ssp5_clk",
-	"ssp5_fs",
-	"ssp5_rxd",
-	"ssp5_txd",
-	"ssp6_clk",
-	"ssp6_fs",
-	"ssp6_rxd",
-	"ssp6_txd",
-	"stat_1",
-	"stat_2",
-	"sysclken",
-	"traceclk",
-	"tracedt00",
-	"tracedt01",
-	"tracedt02",
-	"tracedt03",
-	"tracedt04",
-	"tracedt05",
-	"tracedt06",
-	"tracedt07",
-	"tracedt08",
-	"tracedt09",
-	"tracedt10",
-	"tracedt11",
-	"tracedt12",
-	"tracedt13",
-	"tracedt14",
-	"tracedt15",
-	"txdata3g0",
-	"txpwrind",
-	"uartb1_ucts",
-	"uartb1_urts",
-	"uartb1_urxd",
-	"uartb1_utxd",
-	"uartb2_urxd",
-	"uartb2_utxd",
-	"uartb3_ucts",
-	"uartb3_urts",
-	"uartb3_urxd",
-	"uartb3_utxd",
-	"uartb4_ucts",
-	"uartb4_urts",
-	"uartb4_urxd",
-	"uartb4_utxd",
-	"vc_cam1_scl",
-	"vc_cam1_sda",
-	"vc_cam2_scl",
-	"vc_cam2_sda",
-	"vc_cam3_scl",
-	"vc_cam3_sda",
-};
-
-/* Every pin can implement all ALT1-ALT4 functions */
-#define CAPRI_PIN_FUNCTION(fcn_name)			\
-{							\
-	.name = #fcn_name,				\
-	.groups = capri_alt_groups,			\
-	.ngroups = ARRAY_SIZE(capri_alt_groups),	\
-}
-
-static const struct capri_pin_function capri_functions[] = {
-	CAPRI_PIN_FUNCTION(alt1),
-	CAPRI_PIN_FUNCTION(alt2),
-	CAPRI_PIN_FUNCTION(alt3),
-	CAPRI_PIN_FUNCTION(alt4),
-};
-
-static struct capri_pinctrl_data capri_pinctrl = {
-	.pins = capri_pinctrl_pins,
-	.npins = ARRAY_SIZE(capri_pinctrl_pins),
-	.functions = capri_functions,
-	.nfunctions = ARRAY_SIZE(capri_functions),
-};
-
-static inline enum capri_pin_type pin_type_get(struct pinctrl_dev *pctldev,
-					       unsigned pin)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
-	if (pin >= pdata->npins)
-		return CAPRI_PIN_TYPE_UNKNOWN;
-
-	return *(enum capri_pin_type *)(pdata->pins[pin].drv_data);
-}
-
-#define CAPRI_PIN_SHIFT(type, param) \
-	(CAPRI_ ## type ## _PIN_REG_ ## param ## _SHIFT)
-
-#define CAPRI_PIN_MASK(type, param) \
-	(CAPRI_ ## type ## _PIN_REG_ ## param ## _MASK)
-
-/*
- * This helper function is used to build up the value and mask used to write to
- * a pin register, but does not actually write to the register.
- */
-static inline void capri_pin_update(u32 *reg_val, u32 *reg_mask, u32 param_val,
-				    u32 param_shift, u32 param_mask)
-{
-	*reg_val &= ~param_mask;
-	*reg_val |= (param_val << param_shift) & param_mask;
-	*reg_mask |= param_mask;
-}
-
-static struct regmap_config capri_pinctrl_regmap_config = {
-	.reg_bits = 32,
-	.reg_stride = 4,
-	.val_bits = 32,
-	.max_register = CAPRI_PIN_VC_CAM3_SDA,
-};
-
-static int capri_pinctrl_get_groups_count(struct pinctrl_dev *pctldev)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
-	return pdata->npins;
-}
-
-static const char *capri_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
-						unsigned group)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
-	return pdata->pins[group].name;
-}
-
-static int capri_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
-					unsigned group,
-					const unsigned **pins,
-					unsigned *num_pins)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
-	*pins = &pdata->pins[group].number;
-	*num_pins = 1;
-
-	return 0;
-}
-
-static void capri_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev,
-				       struct seq_file *s,
-				       unsigned offset)
-{
-	seq_printf(s, " %s", dev_name(pctldev->dev));
-}
-
-static struct pinctrl_ops capri_pinctrl_ops = {
-	.get_groups_count = capri_pinctrl_get_groups_count,
-	.get_group_name = capri_pinctrl_get_group_name,
-	.get_group_pins = capri_pinctrl_get_group_pins,
-	.pin_dbg_show = capri_pinctrl_pin_dbg_show,
-	.dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
-	.dt_free_map = pinctrl_utils_dt_free_map,
-};
-
-static int capri_pinctrl_get_fcns_count(struct pinctrl_dev *pctldev)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
-	return pdata->nfunctions;
-}
-
-static const char *capri_pinctrl_get_fcn_name(struct pinctrl_dev *pctldev,
-					      unsigned function)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
-	return pdata->functions[function].name;
-}
-
-static int capri_pinctrl_get_fcn_groups(struct pinctrl_dev *pctldev,
-					unsigned function,
-					const char * const **groups,
-					unsigned * const num_groups)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-
-	*groups = pdata->functions[function].groups;
-	*num_groups = pdata->functions[function].ngroups;
-
-	return 0;
-}
-
-static int capri_pinmux_enable(struct pinctrl_dev *pctldev,
-			       unsigned function,
-			       unsigned group)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-	const struct capri_pin_function *f = &pdata->functions[function];
-	u32 offset = 4 * pdata->pins[group].number;
-	int rc = 0;
-
-	dev_dbg(pctldev->dev,
-		"%s(): Enable function %s (%d) of pin %s (%d) @offset 0x%x.\n",
-		__func__, f->name, function, pdata->pins[group].name,
-		pdata->pins[group].number, offset);
-
-	rc = regmap_update_bits(pdata->regmap, offset, CAPRI_PIN_REG_F_SEL_MASK,
-			function << CAPRI_PIN_REG_F_SEL_SHIFT);
-	if (rc)
-		dev_err(pctldev->dev,
-			"Error updating register for pin %s (%d).\n",
-			pdata->pins[group].name, pdata->pins[group].number);
-
-	return rc;
-}
-
-static struct pinmux_ops capri_pinctrl_pinmux_ops = {
-	.get_functions_count = capri_pinctrl_get_fcns_count,
-	.get_function_name = capri_pinctrl_get_fcn_name,
-	.get_function_groups = capri_pinctrl_get_fcn_groups,
-	.enable = capri_pinmux_enable,
-};
-
-static int capri_pinctrl_pin_config_get(struct pinctrl_dev *pctldev,
-					unsigned pin,
-					unsigned long *config)
-{
-	return -ENOTSUPP;
-}
-
-
-/* Goes through the configs and update register val/mask */
-static int capri_std_pin_update(struct pinctrl_dev *pctldev,
-				unsigned pin,
-				unsigned long *configs,
-				unsigned num_configs,
-				u32 *val,
-				u32 *mask)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-	int i;
-	enum pin_config_param param;
-	u16 arg;
-
-	for (i = 0; i < num_configs; i++) {
-		param = pinconf_to_config_param(configs[i]);
-		arg = pinconf_to_config_argument(configs[i]);
-
-		switch (param) {
-		case PIN_CONFIG_INPUT_SCHMITT_ENABLE:
-			arg = (arg >= 1 ? 1 : 0);
-			capri_pin_update(val, mask, arg,
-					CAPRI_PIN_SHIFT(STD, HYST),
-					CAPRI_PIN_MASK(STD, HYST));
-			break;
-		/*
-		 * The pin bias can only be one of pull-up, pull-down, or
-		 * disable.  The user does not need to specify a value for the
-		 * property, and the default value from pinconf-generic is
-		 * ignored.
-		 */
-		case PIN_CONFIG_BIAS_DISABLE:
-			capri_pin_update(val, mask, 0,
-					CAPRI_PIN_SHIFT(STD, PULL_UP),
-					CAPRI_PIN_MASK(STD, PULL_UP));
-			capri_pin_update(val, mask, 0,
-					CAPRI_PIN_SHIFT(STD, PULL_DN),
-					CAPRI_PIN_MASK(STD, PULL_DN));
-			break;
-
-		case PIN_CONFIG_BIAS_PULL_UP:
-			capri_pin_update(val, mask, 1,
-					CAPRI_PIN_SHIFT(STD, PULL_UP),
-					CAPRI_PIN_MASK(STD, PULL_UP));
-			capri_pin_update(val, mask, 0,
-					CAPRI_PIN_SHIFT(STD, PULL_DN),
-					CAPRI_PIN_MASK(STD, PULL_DN));
-			break;
-
-		case PIN_CONFIG_BIAS_PULL_DOWN:
-			capri_pin_update(val, mask, 0,
-					CAPRI_PIN_SHIFT(STD, PULL_UP),
-					CAPRI_PIN_MASK(STD, PULL_UP));
-			capri_pin_update(val, mask, 1,
-					CAPRI_PIN_SHIFT(STD, PULL_DN),
-					CAPRI_PIN_MASK(STD, PULL_DN));
-			break;
-
-		case PIN_CONFIG_SLEW_RATE:
-			arg = (arg >= 1 ? 1 : 0);
-			capri_pin_update(val, mask, arg,
-					CAPRI_PIN_SHIFT(STD, SLEW),
-					CAPRI_PIN_MASK(STD, SLEW));
-			break;
-
-		case PIN_CONFIG_INPUT_ENABLE:
-			/* inversed since register is for input _disable_ */
-			arg = (arg >= 1 ? 0 : 1);
-			capri_pin_update(val, mask, arg,
-					CAPRI_PIN_SHIFT(STD, INPUT_DIS),
-					CAPRI_PIN_MASK(STD, INPUT_DIS));
-			break;
-
-		case PIN_CONFIG_DRIVE_STRENGTH:
-			/* Valid range is 2-16 mA, even numbers only */
-			if ((arg < 2) || (arg > 16) || (arg % 2)) {
-				dev_err(pctldev->dev,
-					"Invalid Drive Strength value (%d) for "
-					"pin %s (%d). Valid values are "
-					"(2..16) mA, even numbers only.\n",
-					arg, pdata->pins[pin].name, pin);
-				return -EINVAL;
-			}
-			capri_pin_update(val, mask, (arg/2)-1,
-					CAPRI_PIN_SHIFT(STD, DRV_STR),
-					CAPRI_PIN_MASK(STD, DRV_STR));
-			break;
-
-		default:
-			dev_err(pctldev->dev,
-				"Unrecognized pin config %d for pin %s (%d).\n",
-				param, pdata->pins[pin].name, pin);
-			return -EINVAL;
-
-		} /* switch config */
-	} /* for each config */
-
-	return 0;
-}
-
-/*
- * The pull-up strength for an I2C pin is represented by bits 4-6 in the
- * register with the following mapping:
- *   0b000: No pull-up
- *   0b001: 1200 Ohm
- *   0b010: 1800 Ohm
- *   0b011: 720 Ohm
- *   0b100: 2700 Ohm
- *   0b101: 831 Ohm
- *   0b110: 1080 Ohm
- *   0b111: 568 Ohm
- * This array maps pull-up strength in Ohms to register values (1+index).
- */
-static const u16 capri_pullup_map[] = {1200, 1800, 720, 2700, 831, 1080, 568};
-
-/* Goes through the configs and update register val/mask */
-static int capri_i2c_pin_update(struct pinctrl_dev *pctldev,
-				unsigned pin,
-				unsigned long *configs,
-				unsigned num_configs,
-				u32 *val,
-				u32 *mask)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-	int i, j;
-	enum pin_config_param param;
-	u16 arg;
-
-	for (i = 0; i < num_configs; i++) {
-		param = pinconf_to_config_param(configs[i]);
-		arg = pinconf_to_config_argument(configs[i]);
-
-		switch (param) {
-		case PIN_CONFIG_BIAS_PULL_UP:
-			for (j = 0; j < ARRAY_SIZE(capri_pullup_map); j++)
-				if (capri_pullup_map[j] == arg)
-					break;
-
-			if (j == ARRAY_SIZE(capri_pullup_map)) {
-				dev_err(pctldev->dev,
-					"Invalid pull-up value (%d) for pin %s "
-					"(%d). Valid values are 568, 720, 831, "
-					"1080, 1200, 1800, 2700 Ohms.\n",
-					arg, pdata->pins[pin].name, pin);
-				return -EINVAL;
-			}
-
-			capri_pin_update(val, mask, j+1,
-					CAPRI_PIN_SHIFT(I2C, PULL_UP_STR),
-					CAPRI_PIN_MASK(I2C, PULL_UP_STR));
-			break;
-
-		case PIN_CONFIG_BIAS_DISABLE:
-			capri_pin_update(val, mask, 0,
-					CAPRI_PIN_SHIFT(I2C, PULL_UP_STR),
-					CAPRI_PIN_MASK(I2C, PULL_UP_STR));
-			break;
-
-		case PIN_CONFIG_SLEW_RATE:
-			arg = (arg >= 1 ? 1 : 0);
-			capri_pin_update(val, mask, arg,
-					CAPRI_PIN_SHIFT(I2C, SLEW),
-					CAPRI_PIN_MASK(I2C, SLEW));
-			break;
-
-		case PIN_CONFIG_INPUT_ENABLE:
-			/* inversed since register is for input _disable_ */
-			arg = (arg >= 1 ? 0 : 1);
-			capri_pin_update(val, mask, arg,
-					CAPRI_PIN_SHIFT(I2C, INPUT_DIS),
-					CAPRI_PIN_MASK(I2C, INPUT_DIS));
-			break;
-
-		default:
-			dev_err(pctldev->dev,
-				"Unrecognized pin config %d for pin %s (%d).\n",
-				param, pdata->pins[pin].name, pin);
-			return -EINVAL;
-
-		} /* switch config */
-	} /* for each config */
-
-	return 0;
-}
-
-/* Goes through the configs and update register val/mask */
-static int capri_hdmi_pin_update(struct pinctrl_dev *pctldev,
-				 unsigned pin,
-				 unsigned long *configs,
-				 unsigned num_configs,
-				 u32 *val,
-				 u32 *mask)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-	int i;
-	enum pin_config_param param;
-	u16 arg;
-
-	for (i = 0; i < num_configs; i++) {
-		param = pinconf_to_config_param(configs[i]);
-		arg = pinconf_to_config_argument(configs[i]);
-
-		switch (param) {
-		case PIN_CONFIG_SLEW_RATE:
-			arg = (arg >= 1 ? 1 : 0);
-			capri_pin_update(val, mask, arg,
-					CAPRI_PIN_SHIFT(HDMI, MODE),
-					CAPRI_PIN_MASK(HDMI, MODE));
-			break;
-
-		case PIN_CONFIG_INPUT_ENABLE:
-			/* inversed since register is for input _disable_ */
-			arg = (arg >= 1 ? 0 : 1);
-			capri_pin_update(val, mask, arg,
-					CAPRI_PIN_SHIFT(HDMI, INPUT_DIS),
-					CAPRI_PIN_MASK(HDMI, INPUT_DIS));
-			break;
-
-		default:
-			dev_err(pctldev->dev,
-				"Unrecognized pin config %d for pin %s (%d).\n",
-				param, pdata->pins[pin].name, pin);
-			return -EINVAL;
-
-		} /* switch config */
-	} /* for each config */
-
-	return 0;
-}
-
-static int capri_pinctrl_pin_config_set(struct pinctrl_dev *pctldev,
-					unsigned pin,
-					unsigned long *configs,
-					unsigned num_configs)
-{
-	struct capri_pinctrl_data *pdata = pinctrl_dev_get_drvdata(pctldev);
-	enum capri_pin_type pin_type;
-	u32 offset = 4 * pin;
-	u32 cfg_val, cfg_mask;
-	int rc;
-
-	cfg_val = 0;
-	cfg_mask = 0;
-	pin_type = pin_type_get(pctldev, pin);
-
-	/* Different pins have different configuration options */
-	switch (pin_type) {
-	case CAPRI_PIN_TYPE_STD:
-		rc = capri_std_pin_update(pctldev, pin, configs, num_configs,
-			&cfg_val, &cfg_mask);
-		break;
-
-	case CAPRI_PIN_TYPE_I2C:
-		rc = capri_i2c_pin_update(pctldev, pin, configs, num_configs,
-			&cfg_val, &cfg_mask);
-		break;
-
-	case CAPRI_PIN_TYPE_HDMI:
-		rc = capri_hdmi_pin_update(pctldev, pin, configs, num_configs,
-			&cfg_val, &cfg_mask);
-		break;
-
-	default:
-		dev_err(pctldev->dev, "Unknown pin type for pin %s (%d).\n",
-			pdata->pins[pin].name, pin);
-		return -EINVAL;
-
-	} /* switch pin type */
-
-	if (rc)
-		return rc;
-
-	dev_dbg(pctldev->dev,
-		"%s(): Set pin %s (%d) with config 0x%x, mask 0x%x\n",
-		__func__, pdata->pins[pin].name, pin, cfg_val, cfg_mask);
-
-	rc = regmap_update_bits(pdata->regmap, offset, cfg_mask, cfg_val);
-	if (rc) {
-		dev_err(pctldev->dev,
-			"Error updating register for pin %s (%d).\n",
-			pdata->pins[pin].name, pin);
-		return rc;
-	}
-
-	return 0;
-}
-
-static struct pinconf_ops capri_pinctrl_pinconf_ops = {
-	.pin_config_get = capri_pinctrl_pin_config_get,
-	.pin_config_set = capri_pinctrl_pin_config_set,
-};
-
-static struct pinctrl_desc capri_pinctrl_desc = {
-	/* name, pins, npins members initialized in probe function */
-	.pctlops = &capri_pinctrl_ops,
-	.pmxops = &capri_pinctrl_pinmux_ops,
-	.confops = &capri_pinctrl_pinconf_ops,
-	.owner = THIS_MODULE,
-};
-
-int __init capri_pinctrl_probe(struct platform_device *pdev)
-{
-	struct capri_pinctrl_data *pdata = &capri_pinctrl;
-	struct resource *res;
-	struct pinctrl_dev *pctl;
-
-	/* So far We can assume there is only 1 bank of registers */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res) {
-		dev_err(&pdev->dev, "Missing MEM resource\n");
-		return -ENODEV;
-	}
-
-	pdata->reg_base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(pdata->reg_base)) {
-		dev_err(&pdev->dev, "Failed to ioremap MEM resource\n");
-		return -ENODEV;
-	}
-
-	/* Initialize the dynamic part of pinctrl_desc */
-	pdata->regmap = devm_regmap_init_mmio(&pdev->dev, pdata->reg_base,
-		&capri_pinctrl_regmap_config);
-	if (IS_ERR(pdata->regmap)) {
-		dev_err(&pdev->dev, "Regmap MMIO init failed.\n");
-		return -ENODEV;
-	}
-
-	capri_pinctrl_desc.name = dev_name(&pdev->dev);
-	capri_pinctrl_desc.pins = capri_pinctrl.pins;
-	capri_pinctrl_desc.npins = capri_pinctrl.npins;
-
-	pctl = pinctrl_register(&capri_pinctrl_desc,
-				&pdev->dev,
-				pdata);
-	if (!pctl) {
-		dev_err(&pdev->dev, "Failed to register pinctrl\n");
-		return -ENODEV;
-	}
-
-	platform_set_drvdata(pdev, pdata);
-
-	return 0;
-}
-
-static struct of_device_id capri_pinctrl_of_match[] = {
-	{ .compatible = "brcm,bcm11351-pinctrl", },
-	{ },
-};
-
-static struct platform_driver capri_pinctrl_driver = {
-	.driver = {
-		.name = "bcm-capri-pinctrl",
-		.owner = THIS_MODULE,
-		.of_match_table = capri_pinctrl_of_match,
-	},
-};
-
-module_platform_driver_probe(capri_pinctrl_driver, capri_pinctrl_probe);
-
-MODULE_AUTHOR("Sherman Yin <syin@broadcom.com>");
-MODULE_DESCRIPTION("Broadcom Capri pinctrl driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/pinctrl/pinctrl-msm.c b/drivers/pinctrl/pinctrl-msm.c
index 38d579b47f31..e43fbce56598 100644
--- a/drivers/pinctrl/pinctrl-msm.c
+++ b/drivers/pinctrl/pinctrl-msm.c
@@ -665,7 +665,10 @@ static void msm_gpio_irq_ack(struct irq_data *d)
 	spin_lock_irqsave(&pctrl->lock, flags);
 
 	val = readl(pctrl->regs + g->intr_status_reg);
-	val &= ~BIT(g->intr_status_bit);
+	if (g->intr_ack_high)
+		val |= BIT(g->intr_status_bit);
+	else
+		val &= ~BIT(g->intr_status_bit);
 	writel(val, pctrl->regs + g->intr_status_reg);
 
 	if (test_bit(d->hwirq, pctrl->dual_edge_irqs))
@@ -744,6 +747,7 @@ static int msm_gpio_irq_set_type(struct irq_data *d, unsigned int type)
 			break;
 		case IRQ_TYPE_EDGE_BOTH:
 			val |= BIT(g->intr_detection_bit);
+			val |= BIT(g->intr_polarity_bit);
 			break;
 		case IRQ_TYPE_LEVEL_LOW:
 			break;
diff --git a/drivers/pinctrl/pinctrl-msm.h b/drivers/pinctrl/pinctrl-msm.h
index 8fbe9fb19f36..6e26f1b676d7 100644
--- a/drivers/pinctrl/pinctrl-msm.h
+++ b/drivers/pinctrl/pinctrl-msm.h
@@ -84,6 +84,7 @@ struct msm_pingroup {
 
 	unsigned intr_enable_bit:5;
 	unsigned intr_status_bit:5;
+	unsigned intr_ack_high:1;
 
 	unsigned intr_target_bit:5;
 	unsigned intr_raw_status_bit:5;
diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c
index 208341fd57d2..8f6f16ef73f3 100644
--- a/drivers/pinctrl/pinctrl-nomadik.c
+++ b/drivers/pinctrl/pinctrl-nomadik.c
@@ -877,7 +877,6 @@ static void nmk_gpio_irq_handler(unsigned int irq, struct irq_desc *desc)
 	struct nmk_gpio_chip *nmk_chip = container_of(chip, struct nmk_gpio_chip, chip);
 	u32 status;
 
-	pr_err("PLONK IRQ %d\n", irq);
 	clk_enable(nmk_chip->clk);
 	status = readl(nmk_chip->addr + NMK_GPIO_IS);
 	clk_disable(nmk_chip->clk);
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index 46dddc159286..96c60d230c13 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -342,7 +342,7 @@ static const struct pinctrl_ops rockchip_pctrl_ops = {
  * @pin: pin to change
  * @mux: new mux function to set
  */
-static void rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
+static int rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
 {
 	struct rockchip_pinctrl *info = bank->drvdata;
 	void __iomem *reg = info->reg_base + info->ctrl->mux_offset;
@@ -350,6 +350,20 @@ static void rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
 	u8 bit;
 	u32 data;
 
+	/*
+	 * The first 16 pins of rk3188_bank0 are always gpios and do not have
+	 * a mux register at all.
+	 */
+	if (bank->bank_type == RK3188_BANK0 && pin < 16) {
+		if (mux != RK_FUNC_GPIO) {
+			dev_err(info->dev,
+				"pin %d only supports a gpio mux\n", pin);
+			return -ENOTSUPP;
+		} else {
+			return 0;
+		}
+	}
+
 	dev_dbg(info->dev, "setting mux of GPIO%d-%d to %d\n",
 						bank->bank_num, pin, mux);
 
@@ -365,6 +379,8 @@ static void rockchip_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
 	writel(data, reg);
 
 	spin_unlock_irqrestore(&bank->slock, flags);
+
+	return 0;
 }
 
 #define RK2928_PULL_OFFSET		0x118
@@ -560,7 +576,7 @@ static int rockchip_pmx_enable(struct pinctrl_dev *pctldev, unsigned selector,
 	const unsigned int *pins = info->groups[group].pins;
 	const struct rockchip_pin_config *data = info->groups[group].data;
 	struct rockchip_pin_bank *bank;
-	int cnt;
+	int cnt, ret = 0;
 
 	dev_dbg(info->dev, "enable function %s group %s\n",
 		info->functions[selector].name, info->groups[group].name);
@@ -571,8 +587,18 @@ static int rockchip_pmx_enable(struct pinctrl_dev *pctldev, unsigned selector,
 	 */
 	for (cnt = 0; cnt < info->groups[group].npins; cnt++) {
 		bank = pin_to_bank(info, pins[cnt]);
-		rockchip_set_mux(bank, pins[cnt] - bank->pin_base,
-				 data[cnt].func);
+		ret = rockchip_set_mux(bank, pins[cnt] - bank->pin_base,
+				       data[cnt].func);
+		if (ret)
+			break;
+	}
+
+	if (ret) {
+		/* revert the already done pin settings */
+		for (cnt--; cnt >= 0; cnt--)
+			rockchip_set_mux(bank, pins[cnt] - bank->pin_base, 0);
+
+		return ret;
 	}
 
 	return 0;
@@ -607,7 +633,7 @@ static int rockchip_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
 	struct rockchip_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
 	struct rockchip_pin_bank *bank;
 	struct gpio_chip *chip;
-	int pin;
+	int pin, ret;
 	u32 data;
 
 	chip = range->gc;
@@ -617,7 +643,9 @@ static int rockchip_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
 	dev_dbg(info->dev, "gpio_direction for pin %u as %s-%d to %s\n",
 		 offset, range->name, pin, input ? "input" : "output");
 
-	rockchip_set_mux(bank, pin, RK_FUNC_GPIO);
+	ret = rockchip_set_mux(bank, pin, RK_FUNC_GPIO);
+	if (ret < 0)
+		return ret;
 
 	data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
 	/* set bit to 1 for output, 0 for input */
@@ -1144,9 +1172,13 @@ static int rockchip_irq_set_type(struct irq_data *d, unsigned int type)
 	u32 polarity;
 	u32 level;
 	u32 data;
+	int ret;
 
 	/* make sure the pin is configured as gpio input */
-	rockchip_set_mux(bank, d->hwirq, RK_FUNC_GPIO);
+	ret = rockchip_set_mux(bank, d->hwirq, RK_FUNC_GPIO);
+	if (ret < 0)
+		return ret;
+
 	data = readl_relaxed(bank->reg_base + GPIO_SWPORT_DDR);
 	data &= ~mask;
 	writel_relaxed(data, bank->reg_base + GPIO_SWPORT_DDR);
@@ -1534,7 +1566,7 @@ static struct rockchip_pin_ctrl rk3188_pin_ctrl = {
 		.nr_banks		= ARRAY_SIZE(rk3188_pin_banks),
 		.label			= "RK3188-GPIO",
 		.type			= RK3188,
-		.mux_offset		= 0x68,
+		.mux_offset		= 0x60,
 		.pull_calc_reg		= rk3188_calc_pull_reg_and_bit,
 };
 
diff --git a/drivers/pwm/pwm-spear.c b/drivers/pwm/pwm-spear.c
index 8ad26b8bf418..cb2d4f0f9711 100644
--- a/drivers/pwm/pwm-spear.c
+++ b/drivers/pwm/pwm-spear.c
@@ -2,7 +2,7 @@
  * ST Microelectronics SPEAr Pulse Width Modulator driver
  *
  * Copyright (C) 2012 ST Microelectronics
- * Shiraz Hashim <shiraz.hashim@st.com>
+ * Shiraz Hashim <shiraz.linux.kernel@gmail.com>
  *
  * This file is licensed under the terms of the GNU General Public
  * License version 2. This program is licensed "as is" without any
@@ -264,6 +264,6 @@ static struct platform_driver spear_pwm_driver = {
 module_platform_driver(spear_pwm_driver);
 
 MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Shiraz Hashim <shiraz.hashim@st.com>");
+MODULE_AUTHOR("Shiraz Hashim <shiraz.linux.kernel@gmail.com>");
 MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.com>");
 MODULE_ALIAS("platform:spear-pwm");
diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c
index 1990285296c6..c316051d9bda 100644
--- a/drivers/s390/char/sclp.c
+++ b/drivers/s390/char/sclp.c
@@ -1252,7 +1252,7 @@ static __init int sclp_initcall(void)
 		return rc;
 
 	sclp_pdev = platform_device_register_simple("sclp", -1, NULL, 0);
-	rc = PTR_RET(sclp_pdev);
+	rc = PTR_ERR_OR_ZERO(sclp_pdev);
 	if (rc)
 		goto fail_platform_driver_unregister;
 
diff --git a/drivers/s390/char/sclp_cmd.c b/drivers/s390/char/sclp_cmd.c
index 6e8f90f84e49..6e14999f9e8f 100644
--- a/drivers/s390/char/sclp_cmd.c
+++ b/drivers/s390/char/sclp_cmd.c
@@ -515,7 +515,7 @@ static int __init sclp_detect_standby_memory(void)
 	if (rc)
 		goto out;
 	sclp_pdev = platform_device_register_simple("sclp_mem", -1, NULL, 0);
-	rc = PTR_RET(sclp_pdev);
+	rc = PTR_ERR_OR_ZERO(sclp_pdev);
 	if (rc)
 		goto out_driver;
 	sclp_add_standby_memory();
diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c
index 4eed38cd0af6..cd9c91909596 100644
--- a/drivers/s390/char/sclp_vt220.c
+++ b/drivers/s390/char/sclp_vt220.c
@@ -97,13 +97,16 @@ static void sclp_vt220_pm_event_fn(struct sclp_register *reg,
 static int __sclp_vt220_emit(struct sclp_vt220_request *request);
 static void sclp_vt220_emit_current(void);
 
-/* Registration structure for our interest in SCLP event buffers */
+/* Registration structure for SCLP output event buffers */
 static struct sclp_register sclp_vt220_register = {
 	.send_mask		= EVTYP_VT220MSG_MASK,
+	.pm_event_fn		= sclp_vt220_pm_event_fn,
+};
+
+/* Registration structure for SCLP input event buffers */
+static struct sclp_register sclp_vt220_register_input = {
 	.receive_mask		= EVTYP_VT220MSG_MASK,
-	.state_change_fn	= NULL,
 	.receiver_fn		= sclp_vt220_receiver_fn,
-	.pm_event_fn		= sclp_vt220_pm_event_fn,
 };
 
 
@@ -715,9 +718,14 @@ static int __init sclp_vt220_tty_init(void)
 	rc = tty_register_driver(driver);
 	if (rc)
 		goto out_init;
+	rc = sclp_register(&sclp_vt220_register_input);
+	if (rc)
+		goto out_reg;
 	sclp_vt220_driver = driver;
 	return 0;
 
+out_reg:
+	tty_unregister_driver(driver);
 out_init:
 	__sclp_vt220_cleanup();
 out_driver:
diff --git a/drivers/staging/xgifb/vb_def.h b/drivers/staging/xgifb/vb_def.h
index 5c739bebd8a5..949f0e5eed8d 100644
--- a/drivers/staging/xgifb/vb_def.h
+++ b/drivers/staging/xgifb/vb_def.h
@@ -1,6 +1,6 @@
 #ifndef _VB_DEF_
 #define _VB_DEF_
-#include "../../video/sis/initdef.h"
+#include "../../video/fbdev/sis/initdef.h"
 
 #define VB_XGI301C      0x0020 /* for 301C */
 
diff --git a/drivers/staging/xgifb/vb_struct.h b/drivers/staging/xgifb/vb_struct.h
index c08ff5b2d6ee..0d27594554ca 100644
--- a/drivers/staging/xgifb/vb_struct.h
+++ b/drivers/staging/xgifb/vb_struct.h
@@ -1,6 +1,6 @@
 #ifndef _VB_STRUCT_
 #define _VB_STRUCT_
-#include "../../video/sis/vstruct.h"
+#include "../../video/fbdev/sis/vstruct.h"
 
 struct XGI_LVDSCRT1HDataStruct {
 	unsigned char Reg[8];
diff --git a/drivers/staging/xgifb/vgatypes.h b/drivers/staging/xgifb/vgatypes.h
index ddf7776c295b..264351441f99 100644
--- a/drivers/staging/xgifb/vgatypes.h
+++ b/drivers/staging/xgifb/vgatypes.h
@@ -2,8 +2,8 @@
 #define _VGATYPES_
 
 #include <linux/fb.h>	/* for struct fb_var_screeninfo for sis.h */
-#include "../../video/sis/vgatypes.h"
-#include "../../video/sis/sis.h"		/* for LCD_TYPE */
+#include "../../video/fbdev/sis/vgatypes.h"
+#include "../../video/fbdev/sis/sis.h"		/* for LCD_TYPE */
 
 #ifndef XGI_VB_CHIP_TYPE
 enum XGI_VB_CHIP_TYPE {
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 6c793bc683d9..c7b4f0f927b1 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -21,7 +21,15 @@ source "drivers/gpu/vga/Kconfig"
 
 source "drivers/gpu/host1x/Kconfig"
 
+menu "Direct Rendering Manager"
 source "drivers/gpu/drm/Kconfig"
+endmenu
+
+menu "Frame buffer Devices"
+source "drivers/video/fbdev/Kconfig"
+endmenu
+
+source "drivers/video/backlight/Kconfig"
 
 config VGASTATE
        tristate
@@ -33,2482 +41,14 @@ config VIDEOMODE_HELPERS
 config HDMI
 	bool
 
-menuconfig FB
-	tristate "Support for frame buffer devices"
-	---help---
-	  The frame buffer device provides an abstraction for the graphics
-	  hardware. It represents the frame buffer of some video hardware and
-	  allows application software to access the graphics hardware through
-	  a well-defined interface, so the software doesn't need to know
-	  anything about the low-level (hardware register) stuff.
-
-	  Frame buffer devices work identically across the different
-	  architectures supported by Linux and make the implementation of
-	  application programs easier and more portable; at this point, an X
-	  server exists which uses the frame buffer device exclusively.
-	  On several non-X86 architectures, the frame buffer device is the
-	  only way to use the graphics hardware.
-
-	  The device is accessed through special device nodes, usually located
-	  in the /dev directory, i.e. /dev/fb*.
-
-	  You need an utility program called fbset to make full use of frame
-	  buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
-	  and the Framebuffer-HOWTO at
-	  <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
-	  information.
-
-	  Say Y here and to the driver for your graphics board below if you
-	  are compiling a kernel for a non-x86 architecture.
-
-	  If you are compiling for the x86 architecture, you can say Y if you
-	  want to play with it, but it is not essential. Please note that
-	  running graphical applications that directly touch the hardware
-	  (e.g. an accelerated X server) and that are not frame buffer
-	  device-aware may cause unexpected results. If unsure, say N.
-
-config FIRMWARE_EDID
-       bool "Enable firmware EDID"
-       depends on FB
-       default n
-       ---help---
-         This enables access to the EDID transferred from the firmware.
-	 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
-	 transfers do not work for your driver and if you are using
-	 nvidiafb, i810fb or savagefb.
-
-	 In general, choosing Y for this option is safe.  If you
-	 experience extremely long delays while booting before you get
-	 something on your display, try setting this to N.  Matrox cards in
-	 combination with certain motherboards and monitors are known to
-	 suffer from this problem.
-
-config FB_DDC
-       tristate
-       depends on FB
-       select I2C_ALGOBIT
-       select I2C
-       default n
-
-config FB_BOOT_VESA_SUPPORT
-	bool
-	depends on FB
-	default n
-	---help---
-	  If true, at least one selected framebuffer driver can take advantage
-	  of VESA video modes set at an early boot stage via the vga= parameter.
-
-config FB_CFB_FILLRECT
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Include the cfb_fillrect function for generic software rectangle
-	  filling. This is used by drivers that don't provide their own
-	  (accelerated) version.
-
-config FB_CFB_COPYAREA
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Include the cfb_copyarea function for generic software area copying.
-	  This is used by drivers that don't provide their own (accelerated)
-	  version.
-
-config FB_CFB_IMAGEBLIT
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Include the cfb_imageblit function for generic software image
-	  blitting. This is used by drivers that don't provide their own
-	  (accelerated) version.
-
-config FB_CFB_REV_PIXELS_IN_BYTE
-	bool
-	depends on FB
-	default n
-	---help---
-	  Allow generic frame-buffer functions to work on displays with 1, 2
-	  and 4 bits per pixel depths which has opposite order of pixels in
-	  byte order to bytes in long order.
-
-config FB_SYS_FILLRECT
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Include the sys_fillrect function for generic software rectangle
-	  filling. This is used by drivers that don't provide their own
-	  (accelerated) version and the framebuffer is in system RAM.
-
-config FB_SYS_COPYAREA
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Include the sys_copyarea function for generic software area copying.
-	  This is used by drivers that don't provide their own (accelerated)
-	  version and the framebuffer is in system RAM.
-
-config FB_SYS_IMAGEBLIT
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Include the sys_imageblit function for generic software image
-	  blitting. This is used by drivers that don't provide their own
-	  (accelerated) version and the framebuffer is in system RAM.
-
-menuconfig FB_FOREIGN_ENDIAN
-	bool "Framebuffer foreign endianness support"
-	depends on FB
-	---help---
-	  This menu will let you enable support for the framebuffers with
-	  non-native endianness (e.g. Little-Endian framebuffer on a
-	  Big-Endian machine). Most probably you don't have such hardware,
-	  so it's safe to say "n" here.
-
-choice
-	prompt "Choice endianness support"
-	depends on FB_FOREIGN_ENDIAN
-
-config FB_BOTH_ENDIAN
-	bool "Support for Big- and Little-Endian framebuffers"
-
-config FB_BIG_ENDIAN
-	bool "Support for Big-Endian framebuffers only"
-
-config FB_LITTLE_ENDIAN
-	bool "Support for Little-Endian framebuffers only"
-
-endchoice
-
-config FB_SYS_FOPS
-       tristate
-       depends on FB
-       default n
-
-config FB_DEFERRED_IO
-	bool
-	depends on FB
-
-config FB_HECUBA
-	tristate
-	depends on FB
-	depends on FB_DEFERRED_IO
-
-config FB_SVGALIB
-	tristate
-	depends on FB
-	default n
-	---help---
-	  Common utility functions useful to fbdev drivers of VGA-based
-	  cards.
-
-config FB_MACMODES
-       tristate
-       depends on FB
-       default n
-
-config FB_BACKLIGHT
-	bool
-	depends on FB
-	select BACKLIGHT_LCD_SUPPORT
-	select BACKLIGHT_CLASS_DEVICE
-	default n
-
-config FB_MODE_HELPERS
-        bool "Enable Video Mode Handling Helpers"
-        depends on FB
-	default n
-	---help---
-	  This enables functions for handling video modes using the
-	  Generalized Timing Formula and the EDID parser. A few drivers rely
-          on this feature such as the radeonfb, rivafb, and the i810fb. If
-	  your driver does not take advantage of this feature, choosing Y will
-	  just increase the kernel size by about 5K.
-
-config FB_TILEBLITTING
-       bool "Enable Tile Blitting Support"
-       depends on FB
-       default n
-       ---help---
-         This enables tile blitting.  Tile blitting is a drawing technique
-	 where the screen is divided into rectangular sections (tiles), whereas
-	 the standard blitting divides the screen into pixels. Because the
-	 default drawing element is a tile, drawing functions will be passed
-	 parameters in terms of number of tiles instead of number of pixels.
-	 For example, to draw a single character, instead of using bitmaps,
-	 an index to an array of bitmaps will be used.  To clear or move a
-	 rectangular section of a screen, the rectangle will be described in
-	 terms of number of tiles in the x- and y-axis.
-
-	 This is particularly important to one driver, matroxfb.  If
-	 unsure, say N.
-
-comment "Frame buffer hardware drivers"
-	depends on FB
-
-config FB_GRVGA
-	tristate "Aeroflex Gaisler framebuffer support"
-	depends on FB && SPARC
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler.
-
-config FB_CIRRUS
-	tristate "Cirrus Logic support"
-	depends on FB && (ZORRO || PCI)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  This enables support for Cirrus Logic GD542x/543x based boards on
-	  Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
-
-	  If you have a PCI-based system, this enables support for these
-	  chips: GD-543x, GD-544x, GD-5480.
-
-	  Please read the file <file:Documentation/fb/cirrusfb.txt>.
-
-	  Say N unless you have such a graphics board or plan to get one
-	  before you next recompile the kernel.
-
-config FB_PM2
-	tristate "Permedia2 support"
-	depends on FB && ((AMIGA && BROKEN) || PCI)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for cards based on
-	  the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
-	  The driver was tested on the following cards:
-		Diamond FireGL 1000 PRO AGP
-		ELSA Gloria Synergy PCI
-		Appian Jeronimo PRO (both heads) PCI
-		3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
-		Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
-		ASK Graphic Blaster Exxtreme AGP
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called pm2fb.
-
-config FB_PM2_FIFO_DISCONNECT
-	bool "enable FIFO disconnect feature"
-	depends on FB_PM2 && PCI
-	help
-	  Support the Permedia2 FIFO disconnect feature.
-
-config FB_ARMCLCD
-	tristate "ARM PrimeCell PL110 support"
-	depends on ARM || ARM64 || COMPILE_TEST
-	depends on FB && ARM_AMBA
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This framebuffer device driver is for the ARM PrimeCell PL110
-	  Colour LCD controller.  ARM PrimeCells provide the building
-	  blocks for System on a Chip devices.
-
-	  If you want to compile this as a module (=code which can be
-	  inserted into and removed from the running kernel), say M
-	  here and read <file:Documentation/kbuild/modules.txt>.  The module
-	  will be called amba-clcd.
-
-config FB_ACORN
-	bool "Acorn VIDC support"
-	depends on (FB = y) && ARM && ARCH_ACORN
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the Acorn VIDC graphics
-	  hardware found in Acorn RISC PCs and other ARM-based machines.  If
-	  unsure, say N.
-
-config FB_CLPS711X
-	bool "CLPS711X LCD support"
-	depends on (FB = y) && ARM && ARCH_CLPS711X
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  Say Y to enable the Framebuffer driver for the CLPS7111 and
-	  EP7212 processors.
-
-config FB_SA1100
-	bool "SA-1100 LCD support"
-	depends on (FB = y) && ARM && ARCH_SA1100
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is a framebuffer device for the SA-1100 LCD Controller.
-	  See <http://www.linux-fbdev.org/> for information on framebuffer
-	  devices.
-
-	  If you plan to use the LCD display with your SA-1100 system, say
-	  Y here.
-
-config FB_IMX
-	tristate "Freescale i.MX1/21/25/27 LCD support"
-	depends on FB && ARCH_MXC
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MODE_HELPERS
-	select VIDEOMODE_HELPERS
-
-config FB_CYBER2000
-	tristate "CyberPro 2000/2010/5000 support"
-	depends on FB && PCI && (BROKEN || !SPARC64)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This enables support for the Integraphics CyberPro 20x0 and 5000
-	  VGA chips used in the Rebel.com Netwinder and other machines.
-	  Say Y if you have a NetWinder or a graphics card containing this
-	  device, otherwise say N.
-
-config FB_CYBER2000_DDC
-	bool "DDC for CyberPro support"
-	depends on FB_CYBER2000
-	select FB_DDC
-	default y
-	help
-	  Say Y here if you want DDC support for your CyberPro graphics
-	  card. This is only I2C bus support, driver does not use EDID.
-
-config FB_CYBER2000_I2C
-	bool "CyberPro 2000/2010/5000 I2C support"
-	depends on FB_CYBER2000 && I2C && ARCH_NETWINDER
-	select I2C_ALGOBIT
-	help
-	  Enable support for the I2C video decoder interface on the
-	  Integraphics CyberPro 20x0 and 5000 VGA chips.  This is used
-	  on the Netwinder machines for the SAA7111 video capture.
-
-config FB_APOLLO
-	bool
-	depends on (FB = y) && APOLLO
-	default y
-	select FB_CFB_FILLRECT
-	select FB_CFB_IMAGEBLIT
-
-config FB_Q40
-	bool
-	depends on (FB = y) && Q40
-	default y
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-
-config FB_AMIGA
-	tristate "Amiga native chipset support"
-	depends on FB && AMIGA
-	help
-	  This is the frame buffer device driver for the builtin graphics
-	  chipset found in Amigas.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called amifb.
-
-config FB_AMIGA_OCS
-	bool "Amiga OCS chipset support"
-	depends on FB_AMIGA
-	help
-	  This enables support for the original Agnus and Denise video chips,
-	  found in the Amiga 1000 and most A500's and A2000's. If you intend
-	  to run Linux on any of these systems, say Y; otherwise say N.
-
-config FB_AMIGA_ECS
-	bool "Amiga ECS chipset support"
-	depends on FB_AMIGA
-	help
-	  This enables support for the Enhanced Chip Set, found in later
-	  A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
-	  you intend to run Linux on any of these systems, say Y; otherwise
-	  say N.
-
-config FB_AMIGA_AGA
-	bool "Amiga AGA chipset support"
-	depends on FB_AMIGA
-	help
-	  This enables support for the Advanced Graphics Architecture (also
-	  known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
-	  and CD32. If you intend to run Linux on any of these systems, say Y;
-	  otherwise say N.
-
-config FB_FM2
-	bool "Amiga FrameMaster II/Rainbow II support"
-	depends on (FB = y) && ZORRO
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the Amiga FrameMaster
-	  card from BSC (exhibited 1992 but not shipped as a CBM product).
-
-config FB_ARC
-	tristate "Arc Monochrome LCD board support"
-	depends on FB && X86
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	help
-	  This enables support for the Arc Monochrome LCD board. The board
-	  is based on the KS-108 lcd controller and is typically a matrix
-	  of 2*n chips. This driver was tested with a 128x64 panel. This
-	  driver supports it for use with x86 SBCs through a 16 bit GPIO
-	  interface (8 bit data, 8 bit control). If you anticipate using
-	  this driver, say Y or M; otherwise say N. You must specify the
-	  GPIO IO address to be used for setting control and data.
-
-config FB_ATARI
-	bool "Atari native chipset support"
-	depends on (FB = y) && ATARI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the builtin graphics
-	  chipset found in Ataris.
-
-config FB_OF
-	bool "Open Firmware frame buffer device support"
-	depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MACMODES
-	help
-	  Say Y if you want support with Open Firmware for your graphics
-	  board.
-
-config FB_CONTROL
-	bool "Apple \"control\" display support"
-	depends on (FB = y) && PPC_PMAC && PPC32
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MACMODES
-	help
-	  This driver supports a frame buffer for the graphics adapter in the
-	  Power Macintosh 7300 and others.
-
-config FB_PLATINUM
-	bool "Apple \"platinum\" display support"
-	depends on (FB = y) && PPC_PMAC && PPC32
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MACMODES
-	help
-	  This driver supports a frame buffer for the "platinum" graphics
-	  adapter in some Power Macintoshes.
-
-config FB_VALKYRIE
-	bool "Apple \"valkyrie\" display support"
-	depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MACMODES
-	help
-	  This driver supports a frame buffer for the "valkyrie" graphics
-	  adapter in some Power Macintoshes.
-
-config FB_CT65550
-	bool "Chips 65550 display support"
-	depends on (FB = y) && PPC32 && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the Chips & Technologies
-	  65550 graphics chip in PowerBooks.
-
-config FB_ASILIANT
-	bool "Asiliant (Chips) 69000 display support"
-	depends on (FB = y) && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the Asiliant 69030 chipset
-
-config FB_IMSTT
-	bool "IMS Twin Turbo display support"
-	depends on (FB = y) && PCI
-	select FB_CFB_IMAGEBLIT
-	select FB_MACMODES if PPC
-	help
-	  The IMS Twin Turbo is a PCI-based frame buffer card bundled with
-	  many Macintosh and compatible computers.
-
-config FB_VGA16
-	tristate "VGA 16-color graphics support"
-	depends on FB && (X86 || PPC)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select VGASTATE
-	select FONT_8x16 if FRAMEBUFFER_CONSOLE
-	help
-	  This is the frame buffer device driver for VGA 16 color graphic
-	  cards. Say Y if you have such a card.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vga16fb.
-
-config FB_BF54X_LQ043
-	tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
-	depends on FB && (BF54x) && !BF542
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	 This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
-
-config FB_BFIN_T350MCQB
-	tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
-	depends on FB && BLACKFIN
-	select BFIN_GPTIMERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	 This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
-	 This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
-	 It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
-
-config FB_BFIN_LQ035Q1
-	tristate "SHARP LQ035Q1DH02 TFT LCD"
-	depends on FB && BLACKFIN && SPI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select BFIN_GPTIMERS
-	help
-	  This is the framebuffer device driver for a SHARP LQ035Q1DH02 TFT display found on
-	  the Blackfin Landscape LCD EZ-Extender Card.
-	  This display is a QVGA 320x240 18-bit RGB display interfaced by an 16-bit wide PPI
-	  It uses PPI[0..15] PPI_FS1, PPI_FS2 and PPI_CLK.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bfin-lq035q1-fb.
-
-config FB_BF537_LQ035
-	tristate "SHARP LQ035 TFT LCD (BF537 STAMP)"
-	depends on FB && (BF534 || BF536 || BF537) && I2C_BLACKFIN_TWI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select BFIN_GPTIMERS
-	help
-	  This is the framebuffer device for a SHARP LQ035Q7DB03 TFT LCD
-	  attached to a BF537.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bf537-lq035.
-
-config FB_BFIN_7393
-	tristate "Blackfin ADV7393 Video encoder"
-	depends on FB && BLACKFIN
-	select I2C
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the framebuffer device for a ADV7393 video encoder
-	  attached to a Blackfin on the PPI port.
-	  If your Blackfin board has a ADV7393 select Y.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called bfin_adv7393fb.
-
-choice
-	prompt  "Video mode support"
-	depends on FB_BFIN_7393
-	default NTSC
-
-config NTSC
-	bool 'NTSC 720x480'
-
-config PAL
-	bool 'PAL 720x576'
-
-config NTSC_640x480
-	bool 'NTSC 640x480 (Experimental)'
-
-config PAL_640x480
-	bool 'PAL 640x480 (Experimental)'
-
-config NTSC_YCBCR
-	bool 'NTSC 720x480 YCbCR input'
-
-config PAL_YCBCR
-	bool 'PAL 720x576 YCbCR input'
-
-endchoice
-
-choice
-	prompt  "Size of ADV7393 frame buffer memory Single/Double Size"
-	depends on (FB_BFIN_7393)
-	default ADV7393_1XMEM
-
-config ADV7393_1XMEM
-	bool 'Single'
-
-config ADV7393_2XMEM
-	bool 'Double'
-endchoice
-
-config FB_STI
-	tristate "HP STI frame buffer device support"
-	depends on FB && PARISC
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select STI_CONSOLE
-	select VT
-	default y
-	---help---
-	  STI refers to the HP "Standard Text Interface" which is a set of
-	  BIOS routines contained in a ROM chip in HP PA-RISC based machines.
-	  Enabling this option will implement the linux framebuffer device
-	  using calls to the STI BIOS routines for initialisation.
-	
-	  If you enable this option, you will get a planar framebuffer device
-	  /dev/fb which will work on the most common HP graphic cards of the
-	  NGLE family, including the artist chips (in the 7xx and Bxxx series),
-	  HCRX, HCRX24, CRX, CRX24 and VisEG series.
-
-	  It is safe to enable this option, so you should probably say "Y".
-
-config FB_MAC
-	bool "Generic Macintosh display support"
-	depends on (FB = y) && MAC
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MACMODES
-
-config FB_HP300
-	bool
-	depends on (FB = y) && DIO
-	select FB_CFB_IMAGEBLIT
-	default y
-
-config FB_TGA
-	tristate "TGA/SFB+ framebuffer support"
-	depends on FB && (ALPHA || TC)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select BITREVERSE
-	---help---
-	  This is the frame buffer device driver for generic TGA and SFB+
-	  graphic cards.  These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
-	  also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
-	  TURBOchannel cards, also known as PMAGD-A, -B and -C.
-
-	  Due to hardware limitations ZLX-E2 and E3 cards are not supported
-	  for DECstation 5000/200 systems.  Additionally due to firmware
-	  limitations these cards may cause troubles with booting DECstation
-	  5000/240 and /260 systems, but are fully supported under Linux if
-	  you manage to get it going. ;-)
-
-	  Say Y if you have one of those.
-
-config FB_UVESA
-	tristate "Userspace VESA VGA graphics support"
-	depends on FB && CONNECTOR
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MODE_HELPERS
-	help
-	  This is the frame buffer driver for generic VBE 2.0 compliant
-	  graphic cards. It can also take advantage of VBE 3.0 features,
-	  such as refresh rate adjustment.
-
-	  This driver generally provides more features than vesafb but
-	  requires a userspace helper application called 'v86d'. See
-	  <file:Documentation/fb/uvesafb.txt> for more information.
-
-	  If unsure, say N.
-
-config FB_VESA
-	bool "VESA VGA graphics support"
-	depends on (FB = y) && X86
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_BOOT_VESA_SUPPORT
-	help
-	  This is the frame buffer device driver for generic VESA 2.0
-	  compliant graphic cards. The older VESA 1.2 cards are not supported.
-	  You will get a boot time penguin logo at no additional cost. Please
-	  read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
-
-config FB_EFI
-	bool "EFI-based Framebuffer Support"
-	depends on (FB = y) && X86 && EFI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the EFI frame buffer device driver. If the firmware on
-	  your platform is EFI 1.10 or UEFI 2.0, select Y to add support for
-	  using the EFI framebuffer as your console.
-
-config FB_N411
-       tristate "N411 Apollo/Hecuba devkit support"
-       depends on FB && X86 && MMU
-       select FB_SYS_FILLRECT
-       select FB_SYS_COPYAREA
-       select FB_SYS_IMAGEBLIT
-       select FB_SYS_FOPS
-       select FB_DEFERRED_IO
-       select FB_HECUBA
-       help
-         This enables support for the Apollo display controller in its
-         Hecuba form using the n411 devkit.
-
-config FB_HGA
-	tristate "Hercules mono graphics support"
-	depends on FB && X86
-	help
-	  Say Y here if you have a Hercules mono graphics card.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called hgafb.
-
-	  As this card technology is at least 25 years old,
-	  most people will answer N here.
-
-config FB_GBE
-	bool "SGI Graphics Backend frame buffer support"
-	depends on (FB = y) && SGI_IP32
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
- 	help
-	  This is the frame buffer device driver for SGI Graphics Backend.
-	  This chip is used in SGI O2 and Visual Workstation 320/540.
-
-config FB_GBE_MEM
-	int "Video memory size in MB"
-	depends on FB_GBE
-	default 4
-	help
-	  This is the amount of memory reserved for the framebuffer,
-	  which can be any value between 1MB and 8MB.
-
-config FB_SBUS
-	bool "SBUS and UPA framebuffers"
-	depends on (FB = y) && SPARC
-	help
-	  Say Y if you want support for SBUS or UPA based frame buffer device.
-
-config FB_BW2
-	bool "BWtwo support"
-	depends on (FB = y) && (SPARC && FB_SBUS)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the BWtwo frame buffer.
-
-config FB_CG3
-	bool "CGthree support"
-	depends on (FB = y) && (SPARC && FB_SBUS)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the CGthree frame buffer.
-
-config FB_CG6
-	bool "CGsix (GX,TurboGX) support"
-	depends on (FB = y) && (SPARC && FB_SBUS)
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the CGsix (GX, TurboGX)
-	  frame buffer.
-
-config FB_FFB
-	bool "Creator/Creator3D/Elite3D support"
-	depends on FB_SBUS && SPARC64
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the Creator, Creator3D,
-	  and Elite3D graphics boards.
-
-config FB_TCX
-	bool "TCX (SS4/SS5 only) support"
-	depends on FB_SBUS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the TCX 24/8bit frame
-	  buffer.
-
-config FB_CG14
-	bool "CGfourteen (SX) support"
-	depends on FB_SBUS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the CGfourteen frame
-	  buffer on Desktop SPARCsystems with the SX graphics option.
-
-config FB_P9100
-	bool "P9100 (Sparcbook 3 only) support"
-	depends on FB_SBUS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the P9100 card
-	  supported on Sparcbook 3 machines.
-
-config FB_LEO
-	bool "Leo (ZX) support"
-	depends on FB_SBUS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the SBUS-based Sun ZX
-	  (leo) frame buffer cards.
-
-config FB_IGA
-	bool "IGA 168x display support"
-	depends on (FB = y) && SPARC32
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the framebuffer device for the INTERGRAPHICS 1680 and
-	  successor frame buffer cards.
-
-config FB_XVR500
-	bool "Sun XVR-500 3DLABS Wildcat support"
-	depends on (FB = y) && PCI && SPARC64
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the framebuffer device for the Sun XVR-500 and similar
-	  graphics cards based upon the 3DLABS Wildcat chipset.  The driver
-	  only works on sparc64 systems where the system firmware has
-	  mostly initialized the card already.  It is treated as a
-	  completely dumb framebuffer device.
-
-config FB_XVR2500
-	bool "Sun XVR-2500 3DLABS Wildcat support"
-	depends on (FB = y) && PCI && SPARC64
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the framebuffer device for the Sun XVR-2500 and similar
-	  graphics cards based upon the 3DLABS Wildcat chipset.  The driver
-	  only works on sparc64 systems where the system firmware has
-	  mostly initialized the card already.  It is treated as a
-	  completely dumb framebuffer device.
-
-config FB_XVR1000
-	bool "Sun XVR-1000 support"
-	depends on (FB = y) && SPARC64
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the framebuffer device for the Sun XVR-1000 and similar
-	  graphics cards.  The driver only works on sparc64 systems where
-	  the system firmware has mostly initialized the card already.  It
-	  is treated as a completely dumb framebuffer device.
-
-config FB_PVR2
-	tristate "NEC PowerVR 2 display support"
-	depends on FB && SH_DREAMCAST
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Say Y here if you have a PowerVR 2 card in your box.  If you plan to
-	  run linux on your Dreamcast, you will have to say Y here.
-	  This driver may or may not work on other PowerVR 2 cards, but is
-	  totally untested.  Use at your own risk.  If unsure, say N.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called pvr2fb.
-
-	  You can pass several parameters to the driver at boot time or at
-	  module load time.  The parameters look like "video=pvr2:XXX", where
-	  the meaning of XXX can be found at the end of the main source file
-	  (<file:drivers/video/pvr2fb.c>). Please see the file
-	  <file:Documentation/fb/pvr2fb.txt>.
-
-config FB_OPENCORES
-	tristate "OpenCores VGA/LCD core 2.0 framebuffer support"
-	depends on FB && HAS_DMA
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This enables support for the OpenCores VGA/LCD core.
-
-	  The OpenCores VGA/LCD core is typically used together with
-	  softcore CPUs (e.g. OpenRISC or Microblaze) or hard processor
-	  systems (e.g. Altera socfpga or Xilinx Zynq) on FPGAs.
-
-	  The source code and specification for the core is available at
-	  <http://opencores.org/project,vga_lcd>
-
-config FB_S1D13XXX
-	tristate "Epson S1D13XXX framebuffer support"
-	depends on FB
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  Support for S1D13XXX framebuffer device family (currently only
-	  working with S1D13806). Product specs at
-	  <http://vdc.epson.com/>
-
-config FB_ATMEL
-	tristate "AT91/AT32 LCD Controller support"
-	depends on FB && HAVE_FB_ATMEL
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MODE_HELPERS
-	select VIDEOMODE_HELPERS
-	help
-	  This enables support for the AT91/AT32 LCD Controller.
-
-config FB_INTSRAM
-	bool "Frame Buffer in internal SRAM"
-	depends on FB_ATMEL && ARCH_AT91SAM9261
-	help
-	  Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
-	  to let frame buffer in external SDRAM.
-
-config FB_ATMEL_STN
-	bool "Use a STN display with AT91/AT32 LCD Controller"
-	depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK)
-	default n
-	help
-	  Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
-	  Controller. Say N if you want to connect a TFT.
-
-	  If unsure, say N.
-
-config FB_NVIDIA
-	tristate "nVidia Framebuffer Support"
-	depends on FB && PCI
-	select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select BITREVERSE
-	select VGASTATE
-	help
-	  This driver supports graphics boards with the nVidia chips, TNT
-	  and newer. For very old chipsets, such as the RIVA128, then use
-	  the rivafb.
-	  Say Y if you have such a graphics board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called nvidiafb.
-
-config FB_NVIDIA_I2C
-       bool "Enable DDC Support"
-       depends on FB_NVIDIA
-       select FB_DDC
-       help
-	  This enables I2C support for nVidia Chipsets.  This is used
-	  only for getting EDID information from the attached display
-	  allowing for robust video mode handling and switching.
-
-	  Because fbdev-2.6 requires that drivers must be able to
-	  independently validate video mode parameters, you should say Y
-	  here.
-
-config FB_NVIDIA_DEBUG
-	bool "Lots of debug output"
-	depends on FB_NVIDIA
-	default n
-	help
-	  Say Y here if you want the nVidia driver to output all sorts
-	  of debugging information to provide to the maintainer when
-	  something goes wrong.
-
-config FB_NVIDIA_BACKLIGHT
-	bool "Support for backlight control"
-	depends on FB_NVIDIA
-	default y
-	help
-	  Say Y here if you want to control the backlight of your display.
-
-config FB_RIVA
-	tristate "nVidia Riva support"
-	depends on FB && PCI
-	select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select BITREVERSE
-	select VGASTATE
-	help
-	  This driver supports graphics boards with the nVidia Riva/Geforce
-	  chips.
-	  Say Y if you have such a graphics board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called rivafb.
-
-config FB_RIVA_I2C
-       bool "Enable DDC Support"
-       depends on FB_RIVA
-       select FB_DDC
-       help
-	  This enables I2C support for nVidia Chipsets.  This is used
-	  only for getting EDID information from the attached display
-	  allowing for robust video mode handling and switching.
-
-	  Because fbdev-2.6 requires that drivers must be able to
-	  independently validate video mode parameters, you should say Y
-	  here.
-
-config FB_RIVA_DEBUG
-	bool "Lots of debug output"
-	depends on FB_RIVA
-	default n
-	help
-	  Say Y here if you want the Riva driver to output all sorts
-	  of debugging information to provide to the maintainer when
-	  something goes wrong.
-
-config FB_RIVA_BACKLIGHT
-	bool "Support for backlight control"
-	depends on FB_RIVA
-	default y
-	help
-	  Say Y here if you want to control the backlight of your display.
-
-config FB_I740
-	tristate "Intel740 support"
-	depends on FB && PCI
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select VGASTATE
-	select FB_DDC
-	help
-	  This driver supports graphics cards based on Intel740 chip.
-
-config FB_I810
-	tristate "Intel 810/815 support"
-	depends on FB && PCI && X86_32 && AGP_INTEL
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select VGASTATE
-	help
-	  This driver supports the on-board graphics built in to the Intel 810 
-          and 815 chipsets.  Say Y if you have and plan to use such a board.
-
-          To compile this driver as a module, choose M here: the
-	  module will be called i810fb.
-
-          For more information, please read 
-	  <file:Documentation/fb/intel810.txt>
-
-config FB_I810_GTF
-	bool "use VESA Generalized Timing Formula"
-	depends on FB_I810
-	help
-	  If you say Y, then the VESA standard, Generalized Timing Formula 
-          or GTF, will be used to calculate the required video timing values
-	  per video mode.  Since the GTF allows nondiscrete timings 
-          (nondiscrete being a range of values as opposed to discrete being a
-          set of values), you'll be able to use any combination of horizontal 
-	  and vertical resolutions, and vertical refresh rates without having
-	  to specify your own timing parameters.  This is especially useful
-	  to maximize the performance of an aging display, or if you just 
-          have a display with nonstandard dimensions. A VESA compliant 
-	  monitor is recommended, but can still work with non-compliant ones.
-	  If you need or want this, then select this option. The timings may 
-	  not be compliant with Intel's recommended values. Use at your own 
-	  risk.
-
-          If you say N, the driver will revert to discrete video timings 
-	  using a set recommended by Intel in their documentation.
-  
-          If unsure, say N.
-
-config FB_I810_I2C
-	bool "Enable DDC Support"
-	depends on FB_I810 && FB_I810_GTF
-	select FB_DDC
-	help
-
-config FB_LE80578
-	tristate "Intel LE80578 (Vermilion) support"
-	depends on FB && PCI && X86
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This driver supports the LE80578 (Vermilion Range) chipset
-
-config FB_CARILLO_RANCH
-	tristate "Intel Carillo Ranch support"
-	depends on FB_LE80578 && FB && PCI && X86
-	help
-	  This driver supports the LE80578 (Carillo Ranch) board
-
-config FB_INTEL
-	tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support"
-	depends on FB && PCI && X86 && AGP_INTEL && EXPERT
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_BOOT_VESA_SUPPORT if FB_INTEL = y
-	depends on !DRM_I915
-	help
-	  This driver supports the on-board graphics built in to the Intel
-          830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
-          Say Y if you have and plan to use such a board.
-
-	  To make FB_INTELFB=Y work you need to say AGP_INTEL=y too.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called intelfb.
-
-	  For more information, please read <file:Documentation/fb/intelfb.txt>
-
-config FB_INTEL_DEBUG
-	bool "Intel driver Debug Messages"
-	depends on FB_INTEL
-	---help---
-	  Say Y here if you want the Intel driver to output all sorts
-	  of debugging information to provide to the maintainer when
-	  something goes wrong.
-
-config FB_INTEL_I2C
-	bool "DDC/I2C for Intel framebuffer support"
-	depends on FB_INTEL
-	select FB_DDC
-	default y
-	help
-	  Say Y here if you want DDC/I2C support for your on-board Intel graphics.
-
-config FB_MATROX
-	tristate "Matrox acceleration"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_TILEBLITTING
-	select FB_MACMODES if PPC_PMAC
-	---help---
-	  Say Y here if you have a Matrox Millennium, Matrox Millennium II,
-	  Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
-	  Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
-	  Matrox G400, G450 or G550 card in your box.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called matroxfb.
-
-	  You can pass several parameters to the driver at boot time or at
-	  module load time. The parameters look like "video=matroxfb:XXX", and
-	  are described in <file:Documentation/fb/matroxfb.txt>.
-
-config FB_MATROX_MILLENIUM
-	bool "Millennium I/II support"
-	depends on FB_MATROX
-	help
-	  Say Y here if you have a Matrox Millennium or Matrox Millennium II
-	  video card. If you select "Advanced lowlevel driver options" below,
-	  you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
-	  packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
-	  also use font widths different from 8.
-
-config FB_MATROX_MYSTIQUE
-	bool "Mystique support"
-	depends on FB_MATROX
-	help
-	  Say Y here if you have a Matrox Mystique or Matrox Mystique 220
-	  video card. If you select "Advanced lowlevel driver options" below,
-	  you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
-	  packed pixel and 32 bpp packed pixel. You can also use font widths
-	  different from 8.
-
-config FB_MATROX_G
-	bool "G100/G200/G400/G450/G550 support"
-	depends on FB_MATROX
-	---help---
-	  Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
-	  video card. If you select "Advanced lowlevel driver options", you
-	  should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
-	  pixel and 32 bpp packed pixel. You can also use font widths
-	  different from 8.
-
-	  If you need support for G400 secondary head, you must say Y to
-	  "Matrox I2C support" and "G400 second head support" right below.
-	  G450/G550 secondary head and digital output are supported without
-	  additional modules.
-
-	  The driver starts in monitor mode. You must use the matroxset tool 
-	  (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to 
-	  swap primary and secondary head outputs, or to change output mode.  
-	  Secondary head driver always start in 640x480 resolution and you 
-	  must use fbset to change it.
-
-	  Do not forget that second head supports only 16 and 32 bpp
-	  packed pixels, so it is a good idea to compile them into the kernel
-	  too. You can use only some font widths, as the driver uses generic
-	  painting procedures (the secondary head does not use acceleration
-	  engine).
-
-	  G450/G550 hardware can display TV picture only from secondary CRTC,
-	  and it performs no scaling, so picture must have 525 or 625 lines.
-
-config FB_MATROX_I2C
-	tristate "Matrox I2C support"
-	depends on FB_MATROX
-	select FB_DDC
-	---help---
-	  This drivers creates I2C buses which are needed for accessing the
-	  DDC (I2C) bus present on all Matroxes, an I2C bus which
-	  interconnects Matrox optional devices, like MGA-TVO on G200 and
-	  G400, and the secondary head DDC bus, present on G400 only.
-
-	  You can say Y or M here if you want to experiment with monitor
-	  detection code. You must say Y or M here if you want to use either
-	  second head of G400 or MGA-TVO on G200 or G400.
-
-	  If you compile it as module, it will create a module named
-	  i2c-matroxfb.
-
-config FB_MATROX_MAVEN
-	tristate "G400 second head support"
-	depends on FB_MATROX_G && FB_MATROX_I2C
-	---help---
-	  WARNING !!! This support does not work with G450 !!!
-
-	  Say Y or M here if you want to use a secondary head (meaning two
-	  monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
-	  head is not compatible with accelerated XFree 3.3.x SVGA servers -
-	  secondary head output is blanked while you are in X. With XFree
-	  3.9.17 preview you can use both heads if you use SVGA over fbdev or
-	  the fbdev driver on first head and the fbdev driver on second head.
-
-	  If you compile it as module, two modules are created,
-	  matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
-	  both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
-	  also load i2c-matroxfb to get it to run.
-
-	  The driver starts in monitor mode and you must use the matroxset
-	  tool (available at
-	  <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
-	  PAL or NTSC or to swap primary and secondary head outputs.
-	  Secondary head driver also always start in 640x480 resolution, you
-	  must use fbset to change it.
-
-	  Also do not forget that second head supports only 16 and 32 bpp
-	  packed pixels, so it is a good idea to compile them into the kernel
-	  too.  You can use only some font widths, as the driver uses generic
-	  painting procedures (the secondary head does not use acceleration
-	  engine).
-
-config FB_RADEON
-	tristate "ATI Radeon display support"
-	depends on FB && PCI
-	select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MACMODES if PPC_OF
-	help
-	  Choose this option if you want to use an ATI Radeon graphics card as
-	  a framebuffer device.  There are both PCI and AGP versions.  You
-	  don't need to choose this to run the Radeon in plain VGA mode.
-
-	  There is a product page at
-	  http://products.amd.com/en-us/GraphicCardResult.aspx
-
-config FB_RADEON_I2C
-	bool "DDC/I2C for ATI Radeon support"
-	depends on FB_RADEON
-	select FB_DDC
-	default y
-	help
-	  Say Y here if you want DDC/I2C support for your Radeon board. 
-
-config FB_RADEON_BACKLIGHT
-	bool "Support for backlight control"
-	depends on FB_RADEON
-	default y
-	help
-	  Say Y here if you want to control the backlight of your display.
-
-config FB_RADEON_DEBUG
-	bool "Lots of debug output from Radeon driver"
-	depends on FB_RADEON
-	default n
-	help
-	  Say Y here if you want the Radeon driver to output all sorts
-	  of debugging information to provide to the maintainer when
-	  something goes wrong.
-
-config FB_ATY128
-	tristate "ATI Rage128 display support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
-	select FB_MACMODES if PPC_PMAC
-	help
-	  This driver supports graphics boards with the ATI Rage128 chips.
-	  Say Y if you have such a graphics board and read
-	  <file:Documentation/fb/aty128fb.txt>.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called aty128fb.
-
-config FB_ATY128_BACKLIGHT
-	bool "Support for backlight control"
-	depends on FB_ATY128
-	default y
-	help
-	  Say Y here if you want to control the backlight of your display.
-
-config FB_ATY
-	tristate "ATI Mach64 display support" if PCI || ATARI
-	depends on FB && !SPARC32
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_BACKLIGHT if FB_ATY_BACKLIGHT
-	select FB_MACMODES if PPC
-	help
-	  This driver supports graphics boards with the ATI Mach64 chips.
-	  Say Y if you have such a graphics board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called atyfb.
-
-config FB_ATY_CT
-	bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
-	depends on PCI && FB_ATY
-	default y if SPARC64 && PCI
-	help
-	  Say Y here to support use of ATI's 64-bit Rage boards (or other
-	  boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
-	  framebuffer device.  The ATI product support page for these boards
-	  is at <http://support.ati.com/products/pc/mach64/mach64.html>.
-
-config FB_ATY_GENERIC_LCD
-	bool "Mach64 generic LCD support"
-	depends on FB_ATY_CT
-	help
-	  Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
-	  Rage XC, or Rage XL chipset.
-
-config FB_ATY_GX
-	bool "Mach64 GX support" if PCI
-	depends on FB_ATY
-	default y if ATARI
-	help
-	  Say Y here to support use of the ATI Mach64 Graphics Expression
-	  board (or other boards based on the Mach64 GX chipset) as a
-	  framebuffer device.  The ATI product support page for these boards
-	  is at
-	  <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
-
-config FB_ATY_BACKLIGHT
-	bool "Support for backlight control"
-	depends on FB_ATY
-	default y
-	help
-	  Say Y here if you want to control the backlight of your display.
-
-config FB_S3
-	tristate "S3 Trio/Virge support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_TILEBLITTING
-	select FB_SVGALIB
-	select VGASTATE
-	select FONT_8x16 if FRAMEBUFFER_CONSOLE
-	---help---
-	  Driver for graphics boards with S3 Trio / S3 Virge chip.
-
-config FB_S3_DDC
-	bool "DDC for S3 support"
-	depends on FB_S3
-	select FB_DDC
-	default y
-	help
-	  Say Y here if you want DDC support for your S3 graphics card.
-
-config FB_SAVAGE
-	tristate "S3 Savage support"
-	depends on FB && PCI
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select VGASTATE
-	help
-	  This driver supports notebooks and computers with S3 Savage PCI/AGP
-	  chips.
-
-	  Say Y if you have such a graphics card.
-
-	  To compile this driver as a module, choose M here; the module
-	  will be called savagefb.
-
-config FB_SAVAGE_I2C
-       bool "Enable DDC2 Support"
-       depends on FB_SAVAGE
-       select FB_DDC
-       help
-	  This enables I2C support for S3 Savage Chipsets.  This is used
-	  only for getting EDID information from the attached display
-	  allowing for robust video mode handling and switching.
-
-	  Because fbdev-2.6 requires that drivers must be able to
-	  independently validate video mode parameters, you should say Y
-	  here.
-
-config FB_SAVAGE_ACCEL
-       bool "Enable Console Acceleration"
-       depends on FB_SAVAGE
-       default n
-       help
-          This option will compile in console acceleration support. If
-          the resulting framebuffer console has bothersome glitches, then
-          choose N here.
-
-config FB_SIS
-	tristate "SiS/XGI display support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_BOOT_VESA_SUPPORT if FB_SIS = y
-	help
-	  This is the frame buffer device driver for the SiS 300, 315, 330
-	  and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
-	  Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
-
-	  To compile this driver as a module, choose M here; the module
-	  will be called sisfb.
-
-config FB_SIS_300
-	bool "SiS 300 series support"
-	depends on FB_SIS
-	help
-	  Say Y here to support use of the SiS 300/305, 540, 630 and 730.
-
-config FB_SIS_315
-	bool "SiS 315/330/340 series and XGI support"
-	depends on FB_SIS
-	help
-	  Say Y here to support use of the SiS 315, 330 and 340 series
-	  (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
-	  as XGI V3XT, V5, V8 and Z7.
-
-config FB_VIA
-       tristate "VIA UniChrome (Pro) and Chrome9 display support"
-       depends on FB && PCI && X86
-       select FB_CFB_FILLRECT
-       select FB_CFB_COPYAREA
-       select FB_CFB_IMAGEBLIT
-       select I2C_ALGOBIT
-       select I2C
-       select GPIOLIB
-       help
-	  This is the frame buffer device driver for Graphics chips of VIA
-	  UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
-	  CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896
- 	  /P4M900,VX800)
-	  Say Y if you have a VIA UniChrome graphics board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called viafb.
-
-if FB_VIA
-
-config FB_VIA_DIRECT_PROCFS
-	bool "direct hardware access via procfs (DEPRECATED)(DANGEROUS)"
-	depends on FB_VIA
-	default n
-	help
-	  Allow direct hardware access to some output registers via procfs.
-	  This is dangerous but may provide the only chance to get the
-	  correct output device configuration.
-	  Its use is strongly discouraged.
-
-config FB_VIA_X_COMPATIBILITY
-	bool "X server compatibility"
-	depends on FB_VIA
-	default n
-	help
-	  This option reduces the functionality (power saving, ...) of the
-	  framebuffer to avoid negative impact on the OpenChrome X server.
-	  If you use any X server other than fbdev you should enable this
-	  otherwise it should be safe to disable it and allow using all
-	  features.
-
-endif
-
-config FB_NEOMAGIC
-	tristate "NeoMagic display support"
-	depends on FB && PCI
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select VGASTATE
-	help
-	  This driver supports notebooks with NeoMagic PCI chips.
-	  Say Y if you have such a graphics card. 
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called neofb.
-
-config FB_KYRO
-	tristate "IMG Kyro support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
-	  graphics board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called kyrofb.
-
-config FB_3DFX
-	tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
-	depends on FB && PCI
-	select FB_CFB_IMAGEBLIT
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_MODE_HELPERS
-	help
-	  This driver supports graphics boards with the 3Dfx Banshee,
-	  Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
-	  such a graphics board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tdfxfb.
-
-config FB_3DFX_ACCEL
-	bool "3Dfx Acceleration functions"
-	depends on FB_3DFX
-	---help---
-	This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
-	device driver with acceleration functions.
-
-config FB_3DFX_I2C
-	bool "Enable DDC/I2C support"
-	depends on FB_3DFX
-	select FB_DDC
-	default y
-	help
-	  Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
-
-config FB_VOODOO1
-	tristate "3Dfx Voodoo Graphics (sst1) support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or 
-	  Voodoo2 (cvg) based graphics card.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called sstfb.
-
-	  WARNING: Do not use any application that uses the 3D engine
-	  (namely glide) while using this driver.
-	  Please read the <file:Documentation/fb/sstfb.txt> for supported
-	  options and other important info  support.
-
-config FB_VT8623
-	tristate "VIA VT8623 support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_TILEBLITTING
-	select FB_SVGALIB
-	select VGASTATE
-	select FONT_8x16 if FRAMEBUFFER_CONSOLE
-	---help---
-	  Driver for CastleRock integrated graphics core in the
-	  VIA VT8623 [Apollo CLE266] chipset.
-
-config FB_TRIDENT
-	tristate "Trident/CyberXXX/CyberBlade support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  This is the frame buffer device driver for Trident PCI/AGP chipsets.
-	  Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
-	  and Blade XP.
-	  There are also integrated versions of these chips called CyberXXXX,
-	  CyberImage or CyberBlade. These chips are mostly found in laptops
-	  but also on some motherboards including early VIA EPIA motherboards.
-	  For more information, read <file:Documentation/fb/tridentfb.txt>
-
-	  Say Y if you have such a graphics board.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called tridentfb.
-
-config FB_ARK
-	tristate "ARK 2000PV support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_TILEBLITTING
-	select FB_SVGALIB
-	select VGASTATE
-	select FONT_8x16 if FRAMEBUFFER_CONSOLE
-	---help---
-	  Driver for PCI graphics boards with ARK 2000PV chip
-	  and ICS 5342 RAMDAC.
-
-config FB_PM3
-	tristate "Permedia3 support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the 3DLabs Permedia3
-	  chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
-	  similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
-	  and maybe other boards.
-
-config FB_CARMINE
-	tristate "Fujitsu carmine frame buffer support"
-	depends on FB && PCI
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the Fujitsu Carmine chip.
-	  The driver provides two independent frame buffer devices.
-
-choice
-	depends on FB_CARMINE
-	prompt "DRAM timing"
-	default FB_CARMINE_DRAM_EVAL
-
-config FB_CARMINE_DRAM_EVAL
-	bool "Eval board timings"
-	help
-	  Use timings which work on the eval card.
-
-config CARMINE_DRAM_CUSTOM
-	bool "Custom board timings"
-	help
-	  Use custom board timings.
-endchoice
-
-config FB_AU1100
-	bool "Au1100 LCD Driver"
-	depends on (FB = y) && MIPS_ALCHEMY
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the framebuffer driver for the AMD Au1100 SOC.  It can drive
-	  various panels and CRTs by passing in kernel cmd line option
-	  au1100fb:panel=<name>.
-
-config FB_AU1200
-	bool "Au1200/Au1300 LCD Driver"
-	depends on (FB = y) && MIPS_ALCHEMY
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	help
-	  This is the framebuffer driver for the Au1200/Au1300 SOCs.
-	  It can drive various panels and CRTs by passing in kernel cmd line
-	  option au1200fb:panel=<name>.
-
-config FB_VT8500
-	bool "VIA VT8500 framebuffer support"
-	depends on (FB = y) && ARM && ARCH_VT8500
-	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
-	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
-	select FB_SYS_IMAGEBLIT
-	select FB_MODE_HELPERS
-	select VIDEOMODE_HELPERS
-	help
-	  This is the framebuffer driver for VIA VT8500 integrated LCD
-	  controller.
-
-config FB_WM8505
-	bool "Wondermedia WM8xxx-series frame buffer support"
-	depends on (FB = y) && ARM && ARCH_VT8500
-	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
-	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
-	select FB_SYS_IMAGEBLIT
-	select FB_MODE_HELPERS
-	select VIDEOMODE_HELPERS
-	help
-	  This is the framebuffer driver for WonderMedia WM8xxx-series
-	  integrated LCD controller. This driver covers the WM8505, WM8650
-	  and WM8850 SoCs.
-
-config FB_WMT_GE_ROPS
-	bool "VT8500/WM8xxx accelerated raster ops support"
-	depends on (FB = y) && (FB_VT8500 || FB_WM8505)
-	default n
-	help
-	  This adds support for accelerated raster operations on the
-	  VIA VT8500 and Wondermedia 85xx series SoCs.
-
-source "drivers/video/geode/Kconfig"
-
-config FB_HIT
-	tristate "HD64461 Frame Buffer support"
-	depends on FB && HD64461
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This is the frame buffer device driver for the Hitachi HD64461 LCD
-	  frame buffer card.
-
-config FB_PMAG_AA
-	bool "PMAG-AA TURBOchannel framebuffer support"
-	depends on (FB = y) && TC
- 	select FB_CFB_FILLRECT
- 	select FB_CFB_COPYAREA
- 	select FB_CFB_IMAGEBLIT
-	help
-	  Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
-	  used mainly in the MIPS-based DECstation series.
-
-config FB_PMAG_BA
-	tristate "PMAG-BA TURBOchannel framebuffer support"
-	depends on FB && TC
- 	select FB_CFB_FILLRECT
- 	select FB_CFB_COPYAREA
- 	select FB_CFB_IMAGEBLIT
-	help
-	  Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
-	  used mainly in the MIPS-based DECstation series.
-
-config FB_PMAGB_B
-	tristate "PMAGB-B TURBOchannel framebuffer support"
-	depends on FB && TC
- 	select FB_CFB_FILLRECT
- 	select FB_CFB_COPYAREA
- 	select FB_CFB_IMAGEBLIT
-	help
-	  Support for the PMAGB-B TURBOchannel framebuffer card used mainly
-	  in the MIPS-based DECstation series. The card is currently only
-	  supported in 1280x1024x8 mode.
-
-config FB_MAXINE
-	bool "Maxine (Personal DECstation) onboard framebuffer support"
-	depends on (FB = y) && MACH_DECSTATION
- 	select FB_CFB_FILLRECT
- 	select FB_CFB_COPYAREA
- 	select FB_CFB_IMAGEBLIT
-	help
-	  Support for the onboard framebuffer (1024x768x8) in the Personal
-	  DECstation series (Personal DECstation 5000/20, /25, /33, /50,
-	  Codename "Maxine").
-
-config FB_G364
-	bool "G364 frame buffer support"
-	depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
- 	select FB_CFB_FILLRECT
- 	select FB_CFB_COPYAREA
- 	select FB_CFB_IMAGEBLIT
-	help
-	  The G364 driver is the framebuffer used in MIPS Magnum 4000 and
-	  Olivetti M700-10 systems.
-
-config FB_68328
-	bool "Motorola 68328 native frame buffer support"
-	depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
- 	select FB_CFB_FILLRECT
- 	select FB_CFB_COPYAREA
- 	select FB_CFB_IMAGEBLIT
-	help
-	  Say Y here if you want to support the built-in frame buffer of
-	  the Motorola 68328 CPU family.
-
-config FB_PXA168
-	tristate "PXA168/910 LCD framebuffer support"
-	depends on FB && (CPU_PXA168 || CPU_PXA910)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for the built-in LCD controller in the Marvell
-	  MMP processor.
-
-config FB_PXA
-	tristate "PXA LCD framebuffer support"
-	depends on FB && ARCH_PXA
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for the built-in LCD controller in the Intel
-	  PXA2x0 processor.
-
-	  This driver is also available as a module ( = code which can be
-	  inserted and removed from the running kernel whenever you want). The
-	  module will be called pxafb. If you want to compile it as a module,
-	  say M here and read <file:Documentation/kbuild/modules.txt>.
-
-	  If unsure, say N.
-
-config FB_PXA_OVERLAY
-	bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
-	default n
-	depends on FB_PXA && (PXA27x || PXA3xx)
-
-config FB_PXA_SMARTPANEL
-	bool "PXA Smartpanel LCD support"
-	default n
-	depends on FB_PXA
-
-config FB_PXA_PARAMETERS
-	bool "PXA LCD command line parameters"
-	default n
-	depends on FB_PXA
-	---help---
-	  Enable the use of kernel command line or module parameters
-	  to configure the physical properties of the LCD panel when
-	  using the PXA LCD driver.
-
-	  This option allows you to override the panel parameters
-	  supplied by the platform in order to support multiple
-	  different models of flatpanel. If you will only be using a
-	  single model of flatpanel then you can safely leave this
-	  option disabled.
-
-	  <file:Documentation/fb/pxafb.txt> describes the available parameters.
-
-config PXA3XX_GCU
-	tristate "PXA3xx 2D graphics accelerator driver"
-	depends on FB_PXA
-	help
-	  Kernelspace driver for the 2D graphics controller unit (GCU)
-	  found on PXA3xx processors. There is a counterpart driver in the
-	  DirectFB suite, see http://www.directfb.org/
-
-	  If you compile this as a module, it will be called pxa3xx_gcu.
-
-config FB_MBX
-	tristate "2700G LCD framebuffer support"
-	depends on FB && ARCH_PXA
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Framebuffer driver for the Intel 2700G (Marathon) Graphics
-	  Accelerator
-
-config FB_MBX_DEBUG
-       bool "Enable debugging info via debugfs"
-       depends on FB_MBX && DEBUG_FS
-       default n
-       ---help---
-         Enable this if you want debugging information using the debug
-         filesystem (debugfs)
-
-         If unsure, say N.
-
-config FB_FSL_DIU
-	tristate "Freescale DIU framebuffer support"
-	depends on FB && FSL_SOC
-	select FB_MODE_HELPERS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select PPC_LIB_RHEAP
-	---help---
-	  Framebuffer driver for the Freescale SoC DIU
-
-config FB_W100
-	tristate "W100 frame buffer support"
-	depends on FB && ARCH_PXA
- 	select FB_CFB_FILLRECT
- 	select FB_CFB_COPYAREA
- 	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
-	  It can also drive the w3220 chip found on iPAQ hx4700.
-
-	  This driver is also available as a module ( = code which can be
-	  inserted and removed from the running kernel whenever you want). The
-	  module will be called w100fb. If you want to compile it as a module,
-	  say M here and read <file:Documentation/kbuild/modules.txt>.
-
-	  If unsure, say N.
-
-config FB_SH_MOBILE_LCDC
-	tristate "SuperH Mobile LCDC framebuffer support"
-	depends on FB && (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	select FB_BACKLIGHT
-	select SH_MIPI_DSI if SH_LCD_MIPI_DSI
-	---help---
-	  Frame buffer driver for the on-chip SH-Mobile LCD controller.
-
-config FB_SH_MOBILE_HDMI
-	tristate "SuperH Mobile HDMI controller support"
-	depends on FB_SH_MOBILE_LCDC
-	select FB_MODE_HELPERS
-	select SOUND
-	select SND
-	select SND_SOC
-	---help---
-	  Driver for the on-chip SH-Mobile HDMI controller.
-
-config FB_TMIO
-	tristate "Toshiba Mobile IO FrameBuffer support"
-	depends on FB && MFD_CORE
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for the Toshiba Mobile IO integrated as found
-	  on the Sharp SL-6000 series
-
-	  This driver is also available as a module ( = code which can be
-	  inserted and removed from the running kernel whenever you want). The
-	  module will be called tmiofb. If you want to compile it as a module,
-	  say M here and read <file:Documentation/kbuild/modules.txt>.
-
-	  If unsure, say N.
-
-config FB_TMIO_ACCELL
-	bool "tmiofb acceleration"
-	depends on FB_TMIO
-	default y
-
-config FB_S3C
-	tristate "Samsung S3C framebuffer support"
-	depends on FB && (CPU_S3C2416 || ARCH_S3C64XX || ARCH_S5P64X0 || \
-		ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for the built-in FB controller in the Samsung
-	  SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
-	  and the S3C64XX series such as the S3C6400 and S3C6410.
-
-	  These chips all have the same basic framebuffer design with the
-	  actual capabilities depending on the chip. For instance the S3C6400
-	  and S3C6410 support 4 hardware windows whereas the S3C24XX series
-	  currently only have two.
-
-	  Currently the support is only for the S3C6400 and S3C6410 SoCs.
-
-config FB_S3C_DEBUG_REGWRITE
-       bool "Debug register writes"
-       depends on FB_S3C
-       ---help---
-         Show all register writes via pr_debug()
-
-config FB_S3C2410
-	tristate "S3C2410 LCD framebuffer support"
-	depends on FB && ARCH_S3C24XX
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for the built-in LCD controller in the Samsung
-	  S3C2410 processor.
-
-	  This driver is also available as a module ( = code which can be
-	  inserted and removed from the running kernel whenever you want). The
-	  module will be called s3c2410fb. If you want to compile it as a module,
-	  say M here and read <file:Documentation/kbuild/modules.txt>.
-
-	  If unsure, say N.
-config FB_S3C2410_DEBUG
-	bool "S3C2410 lcd debug messages"
-	depends on FB_S3C2410
-	help
-	  Turn on debugging messages. Note that you can set/unset at run time
-	  through sysfs
-
-config FB_NUC900
-        bool "NUC900 LCD framebuffer support"
-        depends on FB && ARCH_W90X900
-        select FB_CFB_FILLRECT
-        select FB_CFB_COPYAREA
-        select FB_CFB_IMAGEBLIT
-        ---help---
-          Frame buffer driver for the built-in LCD controller in the Nuvoton
-          NUC900 processor
-
-config GPM1040A0_320X240
-        bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD"
-        depends on FB_NUC900
-
-config FB_SM501
-	tristate "Silicon Motion SM501 framebuffer support"
-	depends on FB && MFD_SM501
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for the CRT and LCD controllers in the Silicon
-	  Motion SM501.
-
-	  This driver is also available as a module ( = code which can be
-	  inserted and removed from the running kernel whenever you want). The
-	  module will be called sm501fb. If you want to compile it as a module,
-	  say M here and read <file:Documentation/kbuild/modules.txt>.
-
-	  If unsure, say N.
-
-config FB_SMSCUFX
-	tristate "SMSC UFX6000/7000 USB Framebuffer support"
-	depends on FB && USB
-	select FB_MODE_HELPERS
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	---help---
-	  This is a kernel framebuffer driver for SMSC UFX USB devices.
-	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
-	  mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
-	  (USB 3.0) devices.
-	  To compile as a module, choose M here: the module name is smscufx.
-
-config FB_UDL
-	tristate "Displaylink USB Framebuffer support"
-	depends on FB && USB
-	select FB_MODE_HELPERS
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	---help---
-	  This is a kernel framebuffer driver for DisplayLink USB devices.
-	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
-	  mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
-	  To compile as a module, choose M here: the module name is udlfb.
-
-config FB_IBM_GXT4500
-	tristate "Framebuffer support for IBM GXT4000P/4500P/6000P/6500P adaptors"
-	depends on FB && PPC
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Say Y here to enable support for the IBM GXT4000P/6000P and
-	  GXT4500P/6500P display adaptor based on Raster Engine RC1000,
-	  found on some IBM System P (pSeries) machines. This driver
-	  doesn't use Geometry Engine GT1000.
-
-config FB_PS3
-	tristate "PS3 GPU framebuffer driver"
-	depends on FB && PS3_PS3AV
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
-	---help---
-	  Include support for the virtual frame buffer in the PS3 platform.
-
-config FB_PS3_DEFAULT_SIZE_M
-	int "PS3 default frame buffer size (in MiB)"
-	depends on FB_PS3
-	default 9
-	---help---
-	  This is the default size (in MiB) of the virtual frame buffer in
-	  the PS3.
-	  The default value can be overridden on the kernel command line
-	  using the "ps3fb" option (e.g. "ps3fb=9M");
-
-config FB_XILINX
-	tristate "Xilinx frame buffer support"
-	depends on FB && (XILINX_VIRTEX || MICROBLAZE || ARCH_ZYNQ)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Include support for the Xilinx ML300/ML403 reference design
-	  framebuffer. ML300 carries a 640*480 LCD display on the board,
-	  ML403 uses a standard DB15 VGA connector.
-
-config FB_GOLDFISH
-	tristate "Goldfish Framebuffer"
-	depends on FB && HAS_DMA
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Framebuffer driver for Goldfish Virtual Platform
-
-config FB_COBALT
-	tristate "Cobalt server LCD frame buffer support"
-	depends on FB && (MIPS_COBALT || MIPS_SEAD3)
-
-config FB_SH7760
-	bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
-	depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \
-		|| CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Support for the SH7760/SH7763/SH7720/SH7721 integrated
-	  (D)STN/TFT LCD Controller.
-	  Supports display resolutions up to 1024x1024 pixel, grayscale and
-	  color operation, with depths ranging from 1 bpp to 8 bpp monochrome
-	  and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
-	  panels <= 320 pixel horizontal resolution.
-
-config FB_DA8XX
-	tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
-	depends on FB && (ARCH_DAVINCI_DA8XX || SOC_AM33XX)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_CFB_REV_PIXELS_IN_BYTE
-	select FB_MODE_HELPERS
-	select VIDEOMODE_HELPERS
-	---help---
-	  This is the frame buffer device driver for the TI LCD controller
-	  found on DA8xx/OMAP-L1xx/AM335x SoCs.
-	  If unsure, say N.
-
-config FB_VIRTUAL
-	tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
-	depends on FB
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	---help---
-	  This is a `virtual' frame buffer device. It operates on a chunk of
-	  unswappable kernel memory instead of on the memory of a graphics
-	  board. This means you cannot see any output sent to this frame
-	  buffer device, while it does consume precious memory. The main use
-	  of this frame buffer device is testing and debugging the frame
-	  buffer subsystem. Do NOT enable it for normal systems! To protect
-	  the innocent, it has to be enabled explicitly at boot time using the
-	  kernel option `video=vfb:'.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called vfb. In order to load it, you must use
-	  the vfb_enable=1 option.
-
-	  If unsure, say N.
-
-config XEN_FBDEV_FRONTEND
-	tristate "Xen virtual frame buffer support"
-	depends on FB && XEN
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	select INPUT_XEN_KBDDEV_FRONTEND if INPUT_MISC
-	select XEN_XENBUS_FRONTEND
-	default y
-	help
-	  This driver implements the front-end of the Xen virtual
-	  frame buffer driver.  It communicates with a back-end
-	  in another domain.
-
-config FB_METRONOME
-	tristate "E-Ink Metronome/8track controller support"
-	depends on FB
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	help
-	  This driver implements support for the E-Ink Metronome
-	  controller. The pre-release name for this device was 8track
-	  and could also have been called by some vendors as PVI-nnnn.
-
-config FB_MB862XX
-	tristate "Fujitsu MB862xx GDC support"
-	depends on FB
-	depends on PCI || (OF && PPC)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
-
-choice
-	prompt "GDC variant"
-	depends on FB_MB862XX
-
-config FB_MB862XX_PCI_GDC
-	bool "Carmine/Coral-P(A) GDC"
-	depends on PCI
-	---help---
-	  This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
-	  PCI graphics controller devices.
-
-config FB_MB862XX_LIME
-	bool "Lime GDC"
-	depends on OF && PPC
-	select FB_FOREIGN_ENDIAN
-	select FB_LITTLE_ENDIAN
-	---help---
-	  Framebuffer support for Fujitsu Lime GDC on host CPU bus.
-
-endchoice
-
-config FB_MB862XX_I2C
-	bool "Support I2C bus on MB862XX GDC"
-	depends on FB_MB862XX && I2C
-	default y
-	help
-	  Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
-	  driver to support accessing I2C devices on controller's I2C bus.
-	  These are usually some video decoder chips.
-
-config FB_EP93XX
-	tristate "EP93XX frame buffer support"
-	depends on FB && ARCH_EP93XX
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	---help---
-	  Framebuffer driver for the Cirrus Logic EP93XX series of processors.
-	  This driver is also available as a module. The module will be called
-	  ep93xx-fb.
-
-config FB_PRE_INIT_FB
-	bool "Don't reinitialize, use bootloader's GDC/Display configuration"
-	depends on FB && FB_MB862XX_LIME
-	---help---
-	  Select this option if display contents should be inherited as set by
-	  the bootloader.
-
-config FB_MSM
-	tristate "MSM Framebuffer support"
-	depends on FB && ARCH_MSM
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-
-config FB_MX3
-	tristate "MX3 Framebuffer support"
-	depends on FB && MX3_IPU
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	default y
-	help
-	  This is a framebuffer device for the i.MX31 LCD Controller. So
-	  far only synchronous displays are supported. If you plan to use
-	  an LCD display with your i.MX31 system, say Y here.
-
-config FB_BROADSHEET
-	tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
-	depends on FB
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	help
-	  This driver implements support for the E-Ink Broadsheet
-	  controller. The release name for this device was Epson S1D13521
-	  and could also have been called by other names when coupled with
-	  a bridge adapter.
-
-config FB_AUO_K190X
-	tristate "AUO-K190X EPD controller support"
-	depends on FB
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	select FB_DEFERRED_IO
-	help
-	  Provides support for epaper controllers from the K190X series
-	  of AUO. These controllers can be used to drive epaper displays
-	  from Sipix.
-
-	  This option enables the common support, shared by the individual
-	  controller drivers. You will also have to enable the driver
-	  for the controller type used in your device.
-
-config FB_AUO_K1900
-	tristate "AUO-K1900 EPD controller support"
-	depends on FB && FB_AUO_K190X
-	help
-	  This driver implements support for the AUO K1900 epd-controller.
-	  This controller can drive Sipix epaper displays but can only do
-	  serial updates, reducing the number of possible frames per second.
-
-config FB_AUO_K1901
-	tristate "AUO-K1901 EPD controller support"
-	depends on FB && FB_AUO_K190X
-	help
-	  This driver implements support for the AUO K1901 epd-controller.
-	  This controller can drive Sipix epaper displays and supports
-	  concurrent updates, making higher frames per second possible.
-
-config FB_JZ4740
-	tristate "JZ4740 LCD framebuffer support"
-	depends on FB && MACH_JZ4740
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	help
-	  Framebuffer support for the JZ4740 SoC.
-
-config FB_MXS
-	tristate "MXS LCD framebuffer support"
-	depends on FB && ARCH_MXS
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	select FB_MODE_HELPERS
-	select VIDEOMODE_HELPERS
-	help
-	  Framebuffer support for the MXS SoC.
-
-config FB_PUV3_UNIGFX
-	tristate "PKUnity v3 Unigfx framebuffer support"
-	depends on FB && UNICORE32 && ARCH_PUV3
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_SYS_FOPS
-	help
-	  Choose this option if you want to use the Unigfx device as a
-	  framebuffer device. Without the support of PCI & AGP.
-
-config FB_HYPERV
-	tristate "Microsoft Hyper-V Synthetic Video support"
-	depends on FB && HYPERV
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
-
-config FB_SIMPLE
-	bool "Simple framebuffer support"
-	depends on (FB = y)
-	select FB_CFB_FILLRECT
-	select FB_CFB_COPYAREA
-	select FB_CFB_IMAGEBLIT
-	help
-	  Say Y if you want support for a simple frame-buffer.
-
-	  This driver assumes that the display hardware has been initialized
-	  before the kernel boots, and the kernel will simply render to the
-	  pre-allocated frame buffer surface.
-
-	  Configuration re: surface address, size, and format must be provided
-	  through device tree, or plain old platform data.
-
-source "drivers/video/omap/Kconfig"
-source "drivers/video/omap2/Kconfig"
-source "drivers/video/exynos/Kconfig"
-source "drivers/video/mmp/Kconfig"
-source "drivers/video/backlight/Kconfig"
-
 if VT
 	source "drivers/video/console/Kconfig"
 endif
 
 if FB || SGI_NEWPORT_CONSOLE
 	source "drivers/video/logo/Kconfig"
-endif
 
-config FB_SH_MOBILE_MERAM
-	tristate "SuperH Mobile MERAM read ahead support"
-	depends on (SUPERH || ARCH_SHMOBILE)
-	select GENERIC_ALLOCATOR
-	---help---
-	  Enable MERAM support for the SuperH controller.
-
-	  This will allow for caching of the framebuffer to provide more
-	  reliable access under heavy main memory bus traffic situations.
-	  Up to 4 memory channels can be configured, allowing 4 RGB or
-	  2 YCbCr framebuffers to be configured.
+endif
 
-config FB_SSD1307
-	tristate "Solomon SSD1307 framebuffer support"
-	depends on FB && I2C
-	depends on OF
-	depends on GPIOLIB
-	select FB_SYS_FOPS
-	select FB_SYS_FILLRECT
-	select FB_SYS_COPYAREA
-	select FB_SYS_IMAGEBLIT
-	select FB_DEFERRED_IO
-	select PWM
-	help
-	  This driver implements support for the Solomon SSD1307
-	  OLED controller over I2C.
 
 endmenu
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 1be26fe10592..9ad3c17d6456 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -1,175 +1,11 @@
-# Makefile for the Linux video drivers.
-# 5 Aug 1999, James Simmons, <mailto:jsimmons@users.sf.net>
-# Rewritten to use lists instead of if-statements.
-
-# Each configuration option enables a list of files.
-
 obj-$(CONFIG_VGASTATE)            += vgastate.o
 obj-$(CONFIG_HDMI)                += hdmi.o
-obj-y                             += fb_notify.o
-obj-$(CONFIG_FB)                  += fb.o
-fb-y                              := fbmem.o fbmon.o fbcmap.o fbsysfs.o \
-                                     modedb.o fbcvt.o
-fb-objs                           := $(fb-y)
 
 obj-$(CONFIG_VT)		  += console/
 obj-$(CONFIG_LOGO)		  += logo/
 obj-y				  += backlight/
 
-obj-$(CONFIG_EXYNOS_VIDEO)     += exynos/
-
-obj-$(CONFIG_FB_CFB_FILLRECT)  += cfbfillrect.o
-obj-$(CONFIG_FB_CFB_COPYAREA)  += cfbcopyarea.o
-obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o
-obj-$(CONFIG_FB_SYS_FILLRECT)  += sysfillrect.o
-obj-$(CONFIG_FB_SYS_COPYAREA)  += syscopyarea.o
-obj-$(CONFIG_FB_SYS_IMAGEBLIT) += sysimgblt.o
-obj-$(CONFIG_FB_SYS_FOPS)      += fb_sys_fops.o
-obj-$(CONFIG_FB_SVGALIB)       += svgalib.o
-obj-$(CONFIG_FB_MACMODES)      += macmodes.o
-obj-$(CONFIG_FB_DDC)           += fb_ddc.o
-obj-$(CONFIG_FB_DEFERRED_IO)   += fb_defio.o
-obj-$(CONFIG_FB_WMT_GE_ROPS)   += wmt_ge_rops.o
-
-# Hardware specific drivers go first
-obj-$(CONFIG_FB_AMIGA)            += amifb.o c2p_planar.o
-obj-$(CONFIG_FB_ARC)              += arcfb.o
-obj-$(CONFIG_FB_CLPS711X)         += clps711xfb.o
-obj-$(CONFIG_FB_CYBER2000)        += cyber2000fb.o
-obj-$(CONFIG_FB_GRVGA)            += grvga.o
-obj-$(CONFIG_FB_PM2)              += pm2fb.o
-obj-$(CONFIG_FB_PM3)		  += pm3fb.o
-
-obj-$(CONFIG_FB_I740)		  += i740fb.o
-obj-$(CONFIG_FB_MATROX)		  += matrox/
-obj-$(CONFIG_FB_RIVA)		  += riva/
-obj-$(CONFIG_FB_NVIDIA)		  += nvidia/
-obj-$(CONFIG_FB_ATY)		  += aty/ macmodes.o
-obj-$(CONFIG_FB_ATY128)		  += aty/ macmodes.o
-obj-$(CONFIG_FB_RADEON)		  += aty/
-obj-$(CONFIG_FB_SIS)		  += sis/
-obj-$(CONFIG_FB_VIA)		  += via/
-obj-$(CONFIG_FB_KYRO)             += kyro/
-obj-$(CONFIG_FB_SAVAGE)		  += savage/
-obj-$(CONFIG_FB_GEODE)		  += geode/
-obj-$(CONFIG_FB_MBX)		  += mbx/
-obj-$(CONFIG_FB_NEOMAGIC)         += neofb.o
-obj-$(CONFIG_FB_3DFX)             += tdfxfb.o
-obj-$(CONFIG_FB_CONTROL)          += controlfb.o
-obj-$(CONFIG_FB_PLATINUM)         += platinumfb.o
-obj-$(CONFIG_FB_VALKYRIE)         += valkyriefb.o
-obj-$(CONFIG_FB_CT65550)          += chipsfb.o
-obj-$(CONFIG_FB_IMSTT)            += imsttfb.o
-obj-$(CONFIG_FB_FM2)              += fm2fb.o
-obj-$(CONFIG_FB_VT8623)           += vt8623fb.o
-obj-$(CONFIG_FB_TRIDENT)          += tridentfb.o
-obj-$(CONFIG_FB_LE80578)          += vermilion/
-obj-$(CONFIG_FB_S3)               += s3fb.o
-obj-$(CONFIG_FB_ARK)              += arkfb.o
-obj-$(CONFIG_FB_STI)              += stifb.o
-obj-$(CONFIG_FB_FFB)              += ffb.o sbuslib.o
-obj-$(CONFIG_FB_CG6)              += cg6.o sbuslib.o
-obj-$(CONFIG_FB_CG3)              += cg3.o sbuslib.o
-obj-$(CONFIG_FB_BW2)              += bw2.o sbuslib.o
-obj-$(CONFIG_FB_CG14)             += cg14.o sbuslib.o
-obj-$(CONFIG_FB_P9100)            += p9100.o sbuslib.o
-obj-$(CONFIG_FB_TCX)              += tcx.o sbuslib.o
-obj-$(CONFIG_FB_LEO)              += leo.o sbuslib.o
-obj-$(CONFIG_FB_ACORN)            += acornfb.o
-obj-$(CONFIG_FB_ATARI)            += atafb.o c2p_iplan2.o atafb_mfb.o \
-                                     atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o
-obj-$(CONFIG_FB_MAC)              += macfb.o
-obj-$(CONFIG_FB_HECUBA)           += hecubafb.o
-obj-$(CONFIG_FB_N411)             += n411.o
-obj-$(CONFIG_FB_HGA)              += hgafb.o
-obj-$(CONFIG_FB_XVR500)           += sunxvr500.o
-obj-$(CONFIG_FB_XVR2500)          += sunxvr2500.o
-obj-$(CONFIG_FB_XVR1000)          += sunxvr1000.o
-obj-$(CONFIG_FB_IGA)              += igafb.o
-obj-$(CONFIG_FB_APOLLO)           += dnfb.o
-obj-$(CONFIG_FB_Q40)              += q40fb.o
-obj-$(CONFIG_FB_TGA)              += tgafb.o
-obj-$(CONFIG_FB_HP300)            += hpfb.o
-obj-$(CONFIG_FB_G364)             += g364fb.o
-obj-$(CONFIG_FB_EP93XX)		  += ep93xx-fb.o
-obj-$(CONFIG_FB_SA1100)           += sa1100fb.o
-obj-$(CONFIG_FB_HIT)              += hitfb.o
-obj-$(CONFIG_FB_ATMEL)		  += atmel_lcdfb.o
-obj-$(CONFIG_FB_PVR2)             += pvr2fb.o
-obj-$(CONFIG_FB_VOODOO1)          += sstfb.o
-obj-$(CONFIG_FB_ARMCLCD)	  += amba-clcd.o
-obj-$(CONFIG_FB_GOLDFISH)         += goldfishfb.o
-obj-$(CONFIG_FB_68328)            += 68328fb.o
-obj-$(CONFIG_FB_GBE)              += gbefb.o
-obj-$(CONFIG_FB_CIRRUS)		  += cirrusfb.o
-obj-$(CONFIG_FB_ASILIANT)	  += asiliantfb.o
-obj-$(CONFIG_FB_PXA)		  += pxafb.o
-obj-$(CONFIG_FB_PXA168)		  += pxa168fb.o
-obj-$(CONFIG_PXA3XX_GCU)	  += pxa3xx-gcu.o
-obj-$(CONFIG_MMP_DISP)           += mmp/
-obj-$(CONFIG_FB_W100)		  += w100fb.o
-obj-$(CONFIG_FB_TMIO)		  += tmiofb.o
-obj-$(CONFIG_FB_AU1100)		  += au1100fb.o
-obj-$(CONFIG_FB_AU1200)		  += au1200fb.o
-obj-$(CONFIG_FB_VT8500)		  += vt8500lcdfb.o
-obj-$(CONFIG_FB_WM8505)		  += wm8505fb.o
-obj-$(CONFIG_FB_PMAG_AA)	  += pmag-aa-fb.o
-obj-$(CONFIG_FB_PMAG_BA)	  += pmag-ba-fb.o
-obj-$(CONFIG_FB_PMAGB_B)	  += pmagb-b-fb.o
-obj-$(CONFIG_FB_MAXINE)		  += maxinefb.o
-obj-$(CONFIG_FB_METRONOME)        += metronomefb.o
-obj-$(CONFIG_FB_BROADSHEET)       += broadsheetfb.o
-obj-$(CONFIG_FB_AUO_K190X)	  += auo_k190x.o
-obj-$(CONFIG_FB_AUO_K1900)	  += auo_k1900fb.o
-obj-$(CONFIG_FB_AUO_K1901)	  += auo_k1901fb.o
-obj-$(CONFIG_FB_S1D13XXX)	  += s1d13xxxfb.o
-obj-$(CONFIG_FB_SH7760)		  += sh7760fb.o
-obj-$(CONFIG_FB_IMX)              += imxfb.o
-obj-$(CONFIG_FB_S3C)		  += s3c-fb.o
-obj-$(CONFIG_FB_S3C2410)	  += s3c2410fb.o
-obj-$(CONFIG_FB_FSL_DIU)	  += fsl-diu-fb.o
-obj-$(CONFIG_FB_COBALT)           += cobalt_lcdfb.o
-obj-$(CONFIG_FB_IBM_GXT4500)	  += gxt4500.o
-obj-$(CONFIG_FB_PS3)		  += ps3fb.o
-obj-$(CONFIG_FB_SM501)            += sm501fb.o
-obj-$(CONFIG_FB_UDL)		  += udlfb.o
-obj-$(CONFIG_FB_SMSCUFX)	  += smscufx.o
-obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
-obj-$(CONFIG_SH_MIPI_DSI)	  += sh_mipi_dsi.o
-obj-$(CONFIG_FB_SH_MOBILE_HDMI)	  += sh_mobile_hdmi.o
-obj-$(CONFIG_FB_SH_MOBILE_MERAM)  += sh_mobile_meram.o
-obj-$(CONFIG_FB_SH_MOBILE_LCDC)	  += sh_mobile_lcdcfb.o
-obj-$(CONFIG_FB_OMAP)             += omap/
-obj-y                             += omap2/
-obj-$(CONFIG_XEN_FBDEV_FRONTEND)  += xen-fbfront.o
-obj-$(CONFIG_FB_CARMINE)          += carminefb.o
-obj-$(CONFIG_FB_MB862XX)	  += mb862xx/
-obj-$(CONFIG_FB_MSM)              += msm/
-obj-$(CONFIG_FB_NUC900)           += nuc900fb.o
-obj-$(CONFIG_FB_JZ4740)		  += jz4740_fb.o
-obj-$(CONFIG_FB_PUV3_UNIGFX)      += fb-puv3.o
-obj-$(CONFIG_FB_HYPERV)		  += hyperv_fb.o
-obj-$(CONFIG_FB_OPENCORES)	  += ocfb.o
-
-# Platform or fallback drivers go here
-obj-$(CONFIG_FB_UVESA)            += uvesafb.o
-obj-$(CONFIG_FB_VESA)             += vesafb.o
-obj-$(CONFIG_FB_EFI)              += efifb.o
-obj-$(CONFIG_FB_VGA16)            += vga16fb.o
-obj-$(CONFIG_FB_OF)               += offb.o
-obj-$(CONFIG_FB_BF537_LQ035)      += bf537-lq035.o
-obj-$(CONFIG_FB_BF54X_LQ043)	  += bf54x-lq043fb.o
-obj-$(CONFIG_FB_BFIN_LQ035Q1)     += bfin-lq035q1-fb.o
-obj-$(CONFIG_FB_BFIN_T350MCQB)	  += bfin-t350mcqb-fb.o
-obj-$(CONFIG_FB_BFIN_7393)        += bfin_adv7393fb.o
-obj-$(CONFIG_FB_MX3)		  += mx3fb.o
-obj-$(CONFIG_FB_DA8XX)		  += da8xx-fb.o
-obj-$(CONFIG_FB_MXS)		  += mxsfb.o
-obj-$(CONFIG_FB_SSD1307)	  += ssd1307fb.o
-obj-$(CONFIG_FB_SIMPLE)           += simplefb.o
-
-# the test framebuffer is last
-obj-$(CONFIG_FB_VIRTUAL)          += vfb.o
+obj-y				  += fbdev/
 
 obj-$(CONFIG_VIDEOMODE_HELPERS) += display_timing.o videomode.o
 ifeq ($(CONFIG_OF),y)
diff --git a/drivers/video/console/sticon.c b/drivers/video/console/sticon.c
index 5f65ca3d8564..026fd1215933 100644
--- a/drivers/video/console/sticon.c
+++ b/drivers/video/console/sticon.c
@@ -46,7 +46,7 @@
 
 #include <asm/io.h>
 
-#include "../sticore.h"
+#include "../fbdev/sticore.h"
 
 /* switching to graphics mode */
 #define BLANK 0
diff --git a/drivers/video/console/sticore.c b/drivers/video/console/sticore.c
index cecd3de01c24..7da1ad03acb5 100644
--- a/drivers/video/console/sticore.c
+++ b/drivers/video/console/sticore.c
@@ -28,7 +28,7 @@
 #include <asm/cacheflush.h>
 #include <asm/grfioctl.h>
 
-#include "../sticore.h"
+#include "../fbdev/sticore.h"
 
 #define STI_DRIVERVERSION "Version 0.9b"
 
diff --git a/drivers/video/68328fb.c b/drivers/video/fbdev/68328fb.c
index 552258c8f99d..552258c8f99d 100644
--- a/drivers/video/68328fb.c
+++ b/drivers/video/fbdev/68328fb.c
diff --git a/drivers/video/fbdev/Kconfig b/drivers/video/fbdev/Kconfig
new file mode 100644
index 000000000000..e1f47272fdea
--- /dev/null
+++ b/drivers/video/fbdev/Kconfig
@@ -0,0 +1,2474 @@
+#
+# fbdev configuration
+#
+
+menuconfig FB
+	tristate "Support for frame buffer devices"
+	---help---
+	  The frame buffer device provides an abstraction for the graphics
+	  hardware. It represents the frame buffer of some video hardware and
+	  allows application software to access the graphics hardware through
+	  a well-defined interface, so the software doesn't need to know
+	  anything about the low-level (hardware register) stuff.
+
+	  Frame buffer devices work identically across the different
+	  architectures supported by Linux and make the implementation of
+	  application programs easier and more portable; at this point, an X
+	  server exists which uses the frame buffer device exclusively.
+	  On several non-X86 architectures, the frame buffer device is the
+	  only way to use the graphics hardware.
+
+	  The device is accessed through special device nodes, usually located
+	  in the /dev directory, i.e. /dev/fb*.
+
+	  You need an utility program called fbset to make full use of frame
+	  buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
+	  and the Framebuffer-HOWTO at
+	  <http://www.munted.org.uk/programming/Framebuffer-HOWTO-1.3.html> for more
+	  information.
+
+	  Say Y here and to the driver for your graphics board below if you
+	  are compiling a kernel for a non-x86 architecture.
+
+	  If you are compiling for the x86 architecture, you can say Y if you
+	  want to play with it, but it is not essential. Please note that
+	  running graphical applications that directly touch the hardware
+	  (e.g. an accelerated X server) and that are not frame buffer
+	  device-aware may cause unexpected results. If unsure, say N.
+
+config FIRMWARE_EDID
+       bool "Enable firmware EDID"
+       depends on FB
+       default n
+       ---help---
+         This enables access to the EDID transferred from the firmware.
+	 On the i386, this is from the Video BIOS. Enable this if DDC/I2C
+	 transfers do not work for your driver and if you are using
+	 nvidiafb, i810fb or savagefb.
+
+	 In general, choosing Y for this option is safe.  If you
+	 experience extremely long delays while booting before you get
+	 something on your display, try setting this to N.  Matrox cards in
+	 combination with certain motherboards and monitors are known to
+	 suffer from this problem.
+
+config FB_DDC
+       tristate
+       depends on FB
+       select I2C_ALGOBIT
+       select I2C
+       default n
+
+config FB_BOOT_VESA_SUPPORT
+	bool
+	depends on FB
+	default n
+	---help---
+	  If true, at least one selected framebuffer driver can take advantage
+	  of VESA video modes set at an early boot stage via the vga= parameter.
+
+config FB_CFB_FILLRECT
+	tristate
+	depends on FB
+	default n
+	---help---
+	  Include the cfb_fillrect function for generic software rectangle
+	  filling. This is used by drivers that don't provide their own
+	  (accelerated) version.
+
+config FB_CFB_COPYAREA
+	tristate
+	depends on FB
+	default n
+	---help---
+	  Include the cfb_copyarea function for generic software area copying.
+	  This is used by drivers that don't provide their own (accelerated)
+	  version.
+
+config FB_CFB_IMAGEBLIT
+	tristate
+	depends on FB
+	default n
+	---help---
+	  Include the cfb_imageblit function for generic software image
+	  blitting. This is used by drivers that don't provide their own
+	  (accelerated) version.
+
+config FB_CFB_REV_PIXELS_IN_BYTE
+	bool
+	depends on FB
+	default n
+	---help---
+	  Allow generic frame-buffer functions to work on displays with 1, 2
+	  and 4 bits per pixel depths which has opposite order of pixels in
+	  byte order to bytes in long order.
+
+config FB_SYS_FILLRECT
+	tristate
+	depends on FB
+	default n
+	---help---
+	  Include the sys_fillrect function for generic software rectangle
+	  filling. This is used by drivers that don't provide their own
+	  (accelerated) version and the framebuffer is in system RAM.
+
+config FB_SYS_COPYAREA
+	tristate
+	depends on FB
+	default n
+	---help---
+	  Include the sys_copyarea function for generic software area copying.
+	  This is used by drivers that don't provide their own (accelerated)
+	  version and the framebuffer is in system RAM.
+
+config FB_SYS_IMAGEBLIT
+	tristate
+	depends on FB
+	default n
+	---help---
+	  Include the sys_imageblit function for generic software image
+	  blitting. This is used by drivers that don't provide their own
+	  (accelerated) version and the framebuffer is in system RAM.
+
+menuconfig FB_FOREIGN_ENDIAN
+	bool "Framebuffer foreign endianness support"
+	depends on FB
+	---help---
+	  This menu will let you enable support for the framebuffers with
+	  non-native endianness (e.g. Little-Endian framebuffer on a
+	  Big-Endian machine). Most probably you don't have such hardware,
+	  so it's safe to say "n" here.
+
+choice
+	prompt "Choice endianness support"
+	depends on FB_FOREIGN_ENDIAN
+
+config FB_BOTH_ENDIAN
+	bool "Support for Big- and Little-Endian framebuffers"
+
+config FB_BIG_ENDIAN
+	bool "Support for Big-Endian framebuffers only"
+
+config FB_LITTLE_ENDIAN
+	bool "Support for Little-Endian framebuffers only"
+
+endchoice
+
+config FB_SYS_FOPS
+       tristate
+       depends on FB
+       default n
+
+config FB_DEFERRED_IO
+	bool
+	depends on FB
+
+config FB_HECUBA
+	tristate
+	depends on FB
+	depends on FB_DEFERRED_IO
+
+config FB_SVGALIB
+	tristate
+	depends on FB
+	default n
+	---help---
+	  Common utility functions useful to fbdev drivers of VGA-based
+	  cards.
+
+config FB_MACMODES
+       tristate
+       depends on FB
+       default n
+
+config FB_BACKLIGHT
+	bool
+	depends on FB
+	select BACKLIGHT_LCD_SUPPORT
+	select BACKLIGHT_CLASS_DEVICE
+	default n
+
+config FB_MODE_HELPERS
+        bool "Enable Video Mode Handling Helpers"
+        depends on FB
+	default n
+	---help---
+	  This enables functions for handling video modes using the
+	  Generalized Timing Formula and the EDID parser. A few drivers rely
+          on this feature such as the radeonfb, rivafb, and the i810fb. If
+	  your driver does not take advantage of this feature, choosing Y will
+	  just increase the kernel size by about 5K.
+
+config FB_TILEBLITTING
+       bool "Enable Tile Blitting Support"
+       depends on FB
+       default n
+       ---help---
+         This enables tile blitting.  Tile blitting is a drawing technique
+	 where the screen is divided into rectangular sections (tiles), whereas
+	 the standard blitting divides the screen into pixels. Because the
+	 default drawing element is a tile, drawing functions will be passed
+	 parameters in terms of number of tiles instead of number of pixels.
+	 For example, to draw a single character, instead of using bitmaps,
+	 an index to an array of bitmaps will be used.  To clear or move a
+	 rectangular section of a screen, the rectangle will be described in
+	 terms of number of tiles in the x- and y-axis.
+
+	 This is particularly important to one driver, matroxfb.  If
+	 unsure, say N.
+
+comment "Frame buffer hardware drivers"
+	depends on FB
+
+config FB_GRVGA
+	tristate "Aeroflex Gaisler framebuffer support"
+	depends on FB && SPARC
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	This enables support for the SVGACTRL framebuffer in the GRLIB IP library from Aeroflex Gaisler.
+
+config FB_CIRRUS
+	tristate "Cirrus Logic support"
+	depends on FB && (ZORRO || PCI)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  This enables support for Cirrus Logic GD542x/543x based boards on
+	  Amiga: SD64, Piccolo, Picasso II/II+, Picasso IV, or EGS Spectrum.
+
+	  If you have a PCI-based system, this enables support for these
+	  chips: GD-543x, GD-544x, GD-5480.
+
+	  Please read the file <file:Documentation/fb/cirrusfb.txt>.
+
+	  Say N unless you have such a graphics board or plan to get one
+	  before you next recompile the kernel.
+
+config FB_PM2
+	tristate "Permedia2 support"
+	depends on FB && ((AMIGA && BROKEN) || PCI)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for cards based on
+	  the 3D Labs Permedia, Permedia 2 and Permedia 2V chips.
+	  The driver was tested on the following cards:
+		Diamond FireGL 1000 PRO AGP
+		ELSA Gloria Synergy PCI
+		Appian Jeronimo PRO (both heads) PCI
+		3DLabs Oxygen ACX aka EONtronics Picasso P2 PCI
+		Techsource Raptor GFX-8P (aka Sun PGX-32) on SPARC
+		ASK Graphic Blaster Exxtreme AGP
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pm2fb.
+
+config FB_PM2_FIFO_DISCONNECT
+	bool "enable FIFO disconnect feature"
+	depends on FB_PM2 && PCI
+	help
+	  Support the Permedia2 FIFO disconnect feature.
+
+config FB_ARMCLCD
+	tristate "ARM PrimeCell PL110 support"
+	depends on ARM || ARM64 || COMPILE_TEST
+	depends on FB && ARM_AMBA
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This framebuffer device driver is for the ARM PrimeCell PL110
+	  Colour LCD controller.  ARM PrimeCells provide the building
+	  blocks for System on a Chip devices.
+
+	  If you want to compile this as a module (=code which can be
+	  inserted into and removed from the running kernel), say M
+	  here and read <file:Documentation/kbuild/modules.txt>.  The module
+	  will be called amba-clcd.
+
+config FB_ACORN
+	bool "Acorn VIDC support"
+	depends on (FB = y) && ARM && ARCH_ACORN
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Acorn VIDC graphics
+	  hardware found in Acorn RISC PCs and other ARM-based machines.  If
+	  unsure, say N.
+
+config FB_CLPS711X
+	bool "CLPS711X LCD support"
+	depends on (FB = y) && ARM && ARCH_CLPS711X
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  Say Y to enable the Framebuffer driver for the CLPS7111 and
+	  EP7212 processors.
+
+config FB_SA1100
+	bool "SA-1100 LCD support"
+	depends on (FB = y) && ARM && ARCH_SA1100
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is a framebuffer device for the SA-1100 LCD Controller.
+	  See <http://www.linux-fbdev.org/> for information on framebuffer
+	  devices.
+
+	  If you plan to use the LCD display with your SA-1100 system, say
+	  Y here.
+
+config FB_IMX
+	tristate "Freescale i.MX1/21/25/27 LCD support"
+	depends on FB && ARCH_MXC
+	select BACKLIGHT_LCD_SUPPORT
+	select LCD_CLASS_DEVICE
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MODE_HELPERS
+	select VIDEOMODE_HELPERS
+
+config FB_CYBER2000
+	tristate "CyberPro 2000/2010/5000 support"
+	depends on FB && PCI && (BROKEN || !SPARC64)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This enables support for the Integraphics CyberPro 20x0 and 5000
+	  VGA chips used in the Rebel.com Netwinder and other machines.
+	  Say Y if you have a NetWinder or a graphics card containing this
+	  device, otherwise say N.
+
+config FB_CYBER2000_DDC
+	bool "DDC for CyberPro support"
+	depends on FB_CYBER2000
+	select FB_DDC
+	default y
+	help
+	  Say Y here if you want DDC support for your CyberPro graphics
+	  card. This is only I2C bus support, driver does not use EDID.
+
+config FB_CYBER2000_I2C
+	bool "CyberPro 2000/2010/5000 I2C support"
+	depends on FB_CYBER2000 && I2C && ARCH_NETWINDER
+	select I2C_ALGOBIT
+	help
+	  Enable support for the I2C video decoder interface on the
+	  Integraphics CyberPro 20x0 and 5000 VGA chips.  This is used
+	  on the Netwinder machines for the SAA7111 video capture.
+
+config FB_APOLLO
+	bool
+	depends on (FB = y) && APOLLO
+	default y
+	select FB_CFB_FILLRECT
+	select FB_CFB_IMAGEBLIT
+
+config FB_Q40
+	bool
+	depends on (FB = y) && Q40
+	default y
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+
+config FB_AMIGA
+	tristate "Amiga native chipset support"
+	depends on FB && AMIGA
+	help
+	  This is the frame buffer device driver for the builtin graphics
+	  chipset found in Amigas.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called amifb.
+
+config FB_AMIGA_OCS
+	bool "Amiga OCS chipset support"
+	depends on FB_AMIGA
+	help
+	  This enables support for the original Agnus and Denise video chips,
+	  found in the Amiga 1000 and most A500's and A2000's. If you intend
+	  to run Linux on any of these systems, say Y; otherwise say N.
+
+config FB_AMIGA_ECS
+	bool "Amiga ECS chipset support"
+	depends on FB_AMIGA
+	help
+	  This enables support for the Enhanced Chip Set, found in later
+	  A500's, later A2000's, the A600, the A3000, the A3000T and CDTV. If
+	  you intend to run Linux on any of these systems, say Y; otherwise
+	  say N.
+
+config FB_AMIGA_AGA
+	bool "Amiga AGA chipset support"
+	depends on FB_AMIGA
+	help
+	  This enables support for the Advanced Graphics Architecture (also
+	  known as the AGA or AA) Chip Set, found in the A1200, A4000, A4000T
+	  and CD32. If you intend to run Linux on any of these systems, say Y;
+	  otherwise say N.
+
+config FB_FM2
+	bool "Amiga FrameMaster II/Rainbow II support"
+	depends on (FB = y) && ZORRO
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Amiga FrameMaster
+	  card from BSC (exhibited 1992 but not shipped as a CBM product).
+
+config FB_ARC
+	tristate "Arc Monochrome LCD board support"
+	depends on FB && X86
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	help
+	  This enables support for the Arc Monochrome LCD board. The board
+	  is based on the KS-108 lcd controller and is typically a matrix
+	  of 2*n chips. This driver was tested with a 128x64 panel. This
+	  driver supports it for use with x86 SBCs through a 16 bit GPIO
+	  interface (8 bit data, 8 bit control). If you anticipate using
+	  this driver, say Y or M; otherwise say N. You must specify the
+	  GPIO IO address to be used for setting control and data.
+
+config FB_ATARI
+	bool "Atari native chipset support"
+	depends on (FB = y) && ATARI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the builtin graphics
+	  chipset found in Ataris.
+
+config FB_OF
+	bool "Open Firmware frame buffer device support"
+	depends on (FB = y) && (PPC64 || PPC_OF) && (!PPC_PSERIES || PCI)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MACMODES
+	help
+	  Say Y if you want support with Open Firmware for your graphics
+	  board.
+
+config FB_CONTROL
+	bool "Apple \"control\" display support"
+	depends on (FB = y) && PPC_PMAC && PPC32
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MACMODES
+	help
+	  This driver supports a frame buffer for the graphics adapter in the
+	  Power Macintosh 7300 and others.
+
+config FB_PLATINUM
+	bool "Apple \"platinum\" display support"
+	depends on (FB = y) && PPC_PMAC && PPC32
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MACMODES
+	help
+	  This driver supports a frame buffer for the "platinum" graphics
+	  adapter in some Power Macintoshes.
+
+config FB_VALKYRIE
+	bool "Apple \"valkyrie\" display support"
+	depends on (FB = y) && (MAC || (PPC_PMAC && PPC32))
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MACMODES
+	help
+	  This driver supports a frame buffer for the "valkyrie" graphics
+	  adapter in some Power Macintoshes.
+
+config FB_CT65550
+	bool "Chips 65550 display support"
+	depends on (FB = y) && PPC32 && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Chips & Technologies
+	  65550 graphics chip in PowerBooks.
+
+config FB_ASILIANT
+	bool "Asiliant (Chips) 69000 display support"
+	depends on (FB = y) && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Asiliant 69030 chipset
+
+config FB_IMSTT
+	bool "IMS Twin Turbo display support"
+	depends on (FB = y) && PCI
+	select FB_CFB_IMAGEBLIT
+	select FB_MACMODES if PPC
+	help
+	  The IMS Twin Turbo is a PCI-based frame buffer card bundled with
+	  many Macintosh and compatible computers.
+
+config FB_VGA16
+	tristate "VGA 16-color graphics support"
+	depends on FB && (X86 || PPC)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select VGASTATE
+	select FONT_8x16 if FRAMEBUFFER_CONSOLE
+	help
+	  This is the frame buffer device driver for VGA 16 color graphic
+	  cards. Say Y if you have such a card.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vga16fb.
+
+config FB_BF54X_LQ043
+	tristate "SHARP LQ043 TFT LCD (BF548 EZKIT)"
+	depends on FB && (BF54x) && !BF542
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	 This is the framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD
+
+config FB_BFIN_T350MCQB
+	tristate "Varitronix COG-T350MCQB TFT LCD display (BF527 EZKIT)"
+	depends on FB && BLACKFIN
+	select BFIN_GPTIMERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	 This is the framebuffer device driver for a Varitronix VL-PS-COG-T350MCQB-01 display TFT LCD
+	 This display is a QVGA 320x240 24-bit RGB display interfaced by an 8-bit wide PPI
+	 It uses PPI[0..7] PPI_FS1, PPI_FS2 and PPI_CLK.
+
+config FB_BFIN_LQ035Q1
+	tristate "SHARP LQ035Q1DH02 TFT LCD"
+	depends on FB && BLACKFIN && SPI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select BFIN_GPTIMERS
+	help
+	  This is the framebuffer device driver for a SHARP LQ035Q1DH02 TFT display found on
+	  the Blackfin Landscape LCD EZ-Extender Card.
+	  This display is a QVGA 320x240 18-bit RGB display interfaced by an 16-bit wide PPI
+	  It uses PPI[0..15] PPI_FS1, PPI_FS2 and PPI_CLK.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bfin-lq035q1-fb.
+
+config FB_BF537_LQ035
+	tristate "SHARP LQ035 TFT LCD (BF537 STAMP)"
+	depends on FB && (BF534 || BF536 || BF537) && I2C_BLACKFIN_TWI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select BFIN_GPTIMERS
+	help
+	  This is the framebuffer device for a SHARP LQ035Q7DB03 TFT LCD
+	  attached to a BF537.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bf537-lq035.
+
+config FB_BFIN_7393
+	tristate "Blackfin ADV7393 Video encoder"
+	depends on FB && BLACKFIN
+	select I2C
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for a ADV7393 video encoder
+	  attached to a Blackfin on the PPI port.
+	  If your Blackfin board has a ADV7393 select Y.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bfin_adv7393fb.
+
+choice
+	prompt  "Video mode support"
+	depends on FB_BFIN_7393
+	default NTSC
+
+config NTSC
+	bool 'NTSC 720x480'
+
+config PAL
+	bool 'PAL 720x576'
+
+config NTSC_640x480
+	bool 'NTSC 640x480 (Experimental)'
+
+config PAL_640x480
+	bool 'PAL 640x480 (Experimental)'
+
+config NTSC_YCBCR
+	bool 'NTSC 720x480 YCbCR input'
+
+config PAL_YCBCR
+	bool 'PAL 720x576 YCbCR input'
+
+endchoice
+
+choice
+	prompt  "Size of ADV7393 frame buffer memory Single/Double Size"
+	depends on (FB_BFIN_7393)
+	default ADV7393_1XMEM
+
+config ADV7393_1XMEM
+	bool 'Single'
+
+config ADV7393_2XMEM
+	bool 'Double'
+endchoice
+
+config FB_STI
+	tristate "HP STI frame buffer device support"
+	depends on FB && PARISC
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select STI_CONSOLE
+	select VT
+	default y
+	---help---
+	  STI refers to the HP "Standard Text Interface" which is a set of
+	  BIOS routines contained in a ROM chip in HP PA-RISC based machines.
+	  Enabling this option will implement the linux framebuffer device
+	  using calls to the STI BIOS routines for initialisation.
+	
+	  If you enable this option, you will get a planar framebuffer device
+	  /dev/fb which will work on the most common HP graphic cards of the
+	  NGLE family, including the artist chips (in the 7xx and Bxxx series),
+	  HCRX, HCRX24, CRX, CRX24 and VisEG series.
+
+	  It is safe to enable this option, so you should probably say "Y".
+
+config FB_MAC
+	bool "Generic Macintosh display support"
+	depends on (FB = y) && MAC
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MACMODES
+
+config FB_HP300
+	bool
+	depends on (FB = y) && DIO
+	select FB_CFB_IMAGEBLIT
+	default y
+
+config FB_TGA
+	tristate "TGA/SFB+ framebuffer support"
+	depends on FB && (ALPHA || TC)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select BITREVERSE
+	---help---
+	  This is the frame buffer device driver for generic TGA and SFB+
+	  graphic cards.  These include DEC ZLXp-E1, -E2 and -E3 PCI cards,
+	  also known as PBXGA-A, -B and -C, and DEC ZLX-E1, -E2 and -E3
+	  TURBOchannel cards, also known as PMAGD-A, -B and -C.
+
+	  Due to hardware limitations ZLX-E2 and E3 cards are not supported
+	  for DECstation 5000/200 systems.  Additionally due to firmware
+	  limitations these cards may cause troubles with booting DECstation
+	  5000/240 and /260 systems, but are fully supported under Linux if
+	  you manage to get it going. ;-)
+
+	  Say Y if you have one of those.
+
+config FB_UVESA
+	tristate "Userspace VESA VGA graphics support"
+	depends on FB && CONNECTOR
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MODE_HELPERS
+	help
+	  This is the frame buffer driver for generic VBE 2.0 compliant
+	  graphic cards. It can also take advantage of VBE 3.0 features,
+	  such as refresh rate adjustment.
+
+	  This driver generally provides more features than vesafb but
+	  requires a userspace helper application called 'v86d'. See
+	  <file:Documentation/fb/uvesafb.txt> for more information.
+
+	  If unsure, say N.
+
+config FB_VESA
+	bool "VESA VGA graphics support"
+	depends on (FB = y) && X86
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_BOOT_VESA_SUPPORT
+	help
+	  This is the frame buffer device driver for generic VESA 2.0
+	  compliant graphic cards. The older VESA 1.2 cards are not supported.
+	  You will get a boot time penguin logo at no additional cost. Please
+	  read <file:Documentation/fb/vesafb.txt>. If unsure, say Y.
+
+config FB_EFI
+	bool "EFI-based Framebuffer Support"
+	depends on (FB = y) && X86 && EFI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the EFI frame buffer device driver. If the firmware on
+	  your platform is EFI 1.10 or UEFI 2.0, select Y to add support for
+	  using the EFI framebuffer as your console.
+
+config FB_N411
+       tristate "N411 Apollo/Hecuba devkit support"
+       depends on FB && X86 && MMU
+       select FB_SYS_FILLRECT
+       select FB_SYS_COPYAREA
+       select FB_SYS_IMAGEBLIT
+       select FB_SYS_FOPS
+       select FB_DEFERRED_IO
+       select FB_HECUBA
+       help
+         This enables support for the Apollo display controller in its
+         Hecuba form using the n411 devkit.
+
+config FB_HGA
+	tristate "Hercules mono graphics support"
+	depends on FB && X86
+	help
+	  Say Y here if you have a Hercules mono graphics card.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hgafb.
+
+	  As this card technology is at least 25 years old,
+	  most people will answer N here.
+
+config FB_GBE
+	bool "SGI Graphics Backend frame buffer support"
+	depends on (FB = y) && SGI_IP32
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+ 	help
+	  This is the frame buffer device driver for SGI Graphics Backend.
+	  This chip is used in SGI O2 and Visual Workstation 320/540.
+
+config FB_GBE_MEM
+	int "Video memory size in MB"
+	depends on FB_GBE
+	default 4
+	help
+	  This is the amount of memory reserved for the framebuffer,
+	  which can be any value between 1MB and 8MB.
+
+config FB_SBUS
+	bool "SBUS and UPA framebuffers"
+	depends on (FB = y) && SPARC
+	help
+	  Say Y if you want support for SBUS or UPA based frame buffer device.
+
+config FB_BW2
+	bool "BWtwo support"
+	depends on (FB = y) && (SPARC && FB_SBUS)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the BWtwo frame buffer.
+
+config FB_CG3
+	bool "CGthree support"
+	depends on (FB = y) && (SPARC && FB_SBUS)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the CGthree frame buffer.
+
+config FB_CG6
+	bool "CGsix (GX,TurboGX) support"
+	depends on (FB = y) && (SPARC && FB_SBUS)
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the CGsix (GX, TurboGX)
+	  frame buffer.
+
+config FB_FFB
+	bool "Creator/Creator3D/Elite3D support"
+	depends on FB_SBUS && SPARC64
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Creator, Creator3D,
+	  and Elite3D graphics boards.
+
+config FB_TCX
+	bool "TCX (SS4/SS5 only) support"
+	depends on FB_SBUS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the TCX 24/8bit frame
+	  buffer.
+
+config FB_CG14
+	bool "CGfourteen (SX) support"
+	depends on FB_SBUS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the CGfourteen frame
+	  buffer on Desktop SPARCsystems with the SX graphics option.
+
+config FB_P9100
+	bool "P9100 (Sparcbook 3 only) support"
+	depends on FB_SBUS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the P9100 card
+	  supported on Sparcbook 3 machines.
+
+config FB_LEO
+	bool "Leo (ZX) support"
+	depends on FB_SBUS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the SBUS-based Sun ZX
+	  (leo) frame buffer cards.
+
+config FB_IGA
+	bool "IGA 168x display support"
+	depends on (FB = y) && SPARC32
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for the INTERGRAPHICS 1680 and
+	  successor frame buffer cards.
+
+config FB_XVR500
+	bool "Sun XVR-500 3DLABS Wildcat support"
+	depends on (FB = y) && PCI && SPARC64
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for the Sun XVR-500 and similar
+	  graphics cards based upon the 3DLABS Wildcat chipset.  The driver
+	  only works on sparc64 systems where the system firmware has
+	  mostly initialized the card already.  It is treated as a
+	  completely dumb framebuffer device.
+
+config FB_XVR2500
+	bool "Sun XVR-2500 3DLABS Wildcat support"
+	depends on (FB = y) && PCI && SPARC64
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for the Sun XVR-2500 and similar
+	  graphics cards based upon the 3DLABS Wildcat chipset.  The driver
+	  only works on sparc64 systems where the system firmware has
+	  mostly initialized the card already.  It is treated as a
+	  completely dumb framebuffer device.
+
+config FB_XVR1000
+	bool "Sun XVR-1000 support"
+	depends on (FB = y) && SPARC64
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer device for the Sun XVR-1000 and similar
+	  graphics cards.  The driver only works on sparc64 systems where
+	  the system firmware has mostly initialized the card already.  It
+	  is treated as a completely dumb framebuffer device.
+
+config FB_PVR2
+	tristate "NEC PowerVR 2 display support"
+	depends on FB && SH_DREAMCAST
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Say Y here if you have a PowerVR 2 card in your box.  If you plan to
+	  run linux on your Dreamcast, you will have to say Y here.
+	  This driver may or may not work on other PowerVR 2 cards, but is
+	  totally untested.  Use at your own risk.  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pvr2fb.
+
+	  You can pass several parameters to the driver at boot time or at
+	  module load time.  The parameters look like "video=pvr2:XXX", where
+	  the meaning of XXX can be found at the end of the main source file
+	  (<file:drivers/video/pvr2fb.c>). Please see the file
+	  <file:Documentation/fb/pvr2fb.txt>.
+
+config FB_OPENCORES
+	tristate "OpenCores VGA/LCD core 2.0 framebuffer support"
+	depends on FB && HAS_DMA
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This enables support for the OpenCores VGA/LCD core.
+
+	  The OpenCores VGA/LCD core is typically used together with
+	  softcore CPUs (e.g. OpenRISC or Microblaze) or hard processor
+	  systems (e.g. Altera socfpga or Xilinx Zynq) on FPGAs.
+
+	  The source code and specification for the core is available at
+	  <http://opencores.org/project,vga_lcd>
+
+config FB_S1D13XXX
+	tristate "Epson S1D13XXX framebuffer support"
+	depends on FB
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  Support for S1D13XXX framebuffer device family (currently only
+	  working with S1D13806). Product specs at
+	  <http://vdc.epson.com/>
+
+config FB_ATMEL
+	tristate "AT91/AT32 LCD Controller support"
+	depends on FB && HAVE_FB_ATMEL
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MODE_HELPERS
+	select VIDEOMODE_HELPERS
+	help
+	  This enables support for the AT91/AT32 LCD Controller.
+
+config FB_INTSRAM
+	bool "Frame Buffer in internal SRAM"
+	depends on FB_ATMEL && ARCH_AT91SAM9261
+	help
+	  Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
+	  to let frame buffer in external SDRAM.
+
+config FB_ATMEL_STN
+	bool "Use a STN display with AT91/AT32 LCD Controller"
+	depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK)
+	default n
+	help
+	  Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
+	  Controller. Say N if you want to connect a TFT.
+
+	  If unsure, say N.
+
+config FB_NVIDIA
+	tristate "nVidia Framebuffer Support"
+	depends on FB && PCI
+	select FB_BACKLIGHT if FB_NVIDIA_BACKLIGHT
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select BITREVERSE
+	select VGASTATE
+	help
+	  This driver supports graphics boards with the nVidia chips, TNT
+	  and newer. For very old chipsets, such as the RIVA128, then use
+	  the rivafb.
+	  Say Y if you have such a graphics board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called nvidiafb.
+
+config FB_NVIDIA_I2C
+       bool "Enable DDC Support"
+       depends on FB_NVIDIA
+       select FB_DDC
+       help
+	  This enables I2C support for nVidia Chipsets.  This is used
+	  only for getting EDID information from the attached display
+	  allowing for robust video mode handling and switching.
+
+	  Because fbdev-2.6 requires that drivers must be able to
+	  independently validate video mode parameters, you should say Y
+	  here.
+
+config FB_NVIDIA_DEBUG
+	bool "Lots of debug output"
+	depends on FB_NVIDIA
+	default n
+	help
+	  Say Y here if you want the nVidia driver to output all sorts
+	  of debugging information to provide to the maintainer when
+	  something goes wrong.
+
+config FB_NVIDIA_BACKLIGHT
+	bool "Support for backlight control"
+	depends on FB_NVIDIA
+	default y
+	help
+	  Say Y here if you want to control the backlight of your display.
+
+config FB_RIVA
+	tristate "nVidia Riva support"
+	depends on FB && PCI
+	select FB_BACKLIGHT if FB_RIVA_BACKLIGHT
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select BITREVERSE
+	select VGASTATE
+	help
+	  This driver supports graphics boards with the nVidia Riva/Geforce
+	  chips.
+	  Say Y if you have such a graphics board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called rivafb.
+
+config FB_RIVA_I2C
+       bool "Enable DDC Support"
+       depends on FB_RIVA
+       select FB_DDC
+       help
+	  This enables I2C support for nVidia Chipsets.  This is used
+	  only for getting EDID information from the attached display
+	  allowing for robust video mode handling and switching.
+
+	  Because fbdev-2.6 requires that drivers must be able to
+	  independently validate video mode parameters, you should say Y
+	  here.
+
+config FB_RIVA_DEBUG
+	bool "Lots of debug output"
+	depends on FB_RIVA
+	default n
+	help
+	  Say Y here if you want the Riva driver to output all sorts
+	  of debugging information to provide to the maintainer when
+	  something goes wrong.
+
+config FB_RIVA_BACKLIGHT
+	bool "Support for backlight control"
+	depends on FB_RIVA
+	default y
+	help
+	  Say Y here if you want to control the backlight of your display.
+
+config FB_I740
+	tristate "Intel740 support"
+	depends on FB && PCI
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select VGASTATE
+	select FB_DDC
+	help
+	  This driver supports graphics cards based on Intel740 chip.
+
+config FB_I810
+	tristate "Intel 810/815 support"
+	depends on FB && PCI && X86_32 && AGP_INTEL
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select VGASTATE
+	help
+	  This driver supports the on-board graphics built in to the Intel 810 
+          and 815 chipsets.  Say Y if you have and plan to use such a board.
+
+          To compile this driver as a module, choose M here: the
+	  module will be called i810fb.
+
+          For more information, please read 
+	  <file:Documentation/fb/intel810.txt>
+
+config FB_I810_GTF
+	bool "use VESA Generalized Timing Formula"
+	depends on FB_I810
+	help
+	  If you say Y, then the VESA standard, Generalized Timing Formula 
+          or GTF, will be used to calculate the required video timing values
+	  per video mode.  Since the GTF allows nondiscrete timings 
+          (nondiscrete being a range of values as opposed to discrete being a
+          set of values), you'll be able to use any combination of horizontal 
+	  and vertical resolutions, and vertical refresh rates without having
+	  to specify your own timing parameters.  This is especially useful
+	  to maximize the performance of an aging display, or if you just 
+          have a display with nonstandard dimensions. A VESA compliant 
+	  monitor is recommended, but can still work with non-compliant ones.
+	  If you need or want this, then select this option. The timings may 
+	  not be compliant with Intel's recommended values. Use at your own 
+	  risk.
+
+          If you say N, the driver will revert to discrete video timings 
+	  using a set recommended by Intel in their documentation.
+  
+          If unsure, say N.
+
+config FB_I810_I2C
+	bool "Enable DDC Support"
+	depends on FB_I810 && FB_I810_GTF
+	select FB_DDC
+	help
+
+config FB_LE80578
+	tristate "Intel LE80578 (Vermilion) support"
+	depends on FB && PCI && X86
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This driver supports the LE80578 (Vermilion Range) chipset
+
+config FB_CARILLO_RANCH
+	tristate "Intel Carillo Ranch support"
+	depends on FB_LE80578 && FB && PCI && X86
+	help
+	  This driver supports the LE80578 (Carillo Ranch) board
+
+config FB_INTEL
+	tristate "Intel 830M/845G/852GM/855GM/865G/915G/945G/945GM/965G/965GM support"
+	depends on FB && PCI && X86 && AGP_INTEL && EXPERT
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_BOOT_VESA_SUPPORT if FB_INTEL = y
+	depends on !DRM_I915
+	help
+	  This driver supports the on-board graphics built in to the Intel
+          830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
+          Say Y if you have and plan to use such a board.
+
+	  To make FB_INTELFB=Y work you need to say AGP_INTEL=y too.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called intelfb.
+
+	  For more information, please read <file:Documentation/fb/intelfb.txt>
+
+config FB_INTEL_DEBUG
+	bool "Intel driver Debug Messages"
+	depends on FB_INTEL
+	---help---
+	  Say Y here if you want the Intel driver to output all sorts
+	  of debugging information to provide to the maintainer when
+	  something goes wrong.
+
+config FB_INTEL_I2C
+	bool "DDC/I2C for Intel framebuffer support"
+	depends on FB_INTEL
+	select FB_DDC
+	default y
+	help
+	  Say Y here if you want DDC/I2C support for your on-board Intel graphics.
+
+config FB_MATROX
+	tristate "Matrox acceleration"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_TILEBLITTING
+	select FB_MACMODES if PPC_PMAC
+	---help---
+	  Say Y here if you have a Matrox Millennium, Matrox Millennium II,
+	  Matrox Mystique, Matrox Mystique 220, Matrox Productiva G100, Matrox
+	  Mystique G200, Matrox Millennium G200, Matrox Marvel G200 video,
+	  Matrox G400, G450 or G550 card in your box.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called matroxfb.
+
+	  You can pass several parameters to the driver at boot time or at
+	  module load time. The parameters look like "video=matroxfb:XXX", and
+	  are described in <file:Documentation/fb/matroxfb.txt>.
+
+config FB_MATROX_MILLENIUM
+	bool "Millennium I/II support"
+	depends on FB_MATROX
+	help
+	  Say Y here if you have a Matrox Millennium or Matrox Millennium II
+	  video card. If you select "Advanced lowlevel driver options" below,
+	  you should check 4 bpp packed pixel, 8 bpp packed pixel, 16 bpp
+	  packed pixel, 24 bpp packed pixel and 32 bpp packed pixel. You can
+	  also use font widths different from 8.
+
+config FB_MATROX_MYSTIQUE
+	bool "Mystique support"
+	depends on FB_MATROX
+	help
+	  Say Y here if you have a Matrox Mystique or Matrox Mystique 220
+	  video card. If you select "Advanced lowlevel driver options" below,
+	  you should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp
+	  packed pixel and 32 bpp packed pixel. You can also use font widths
+	  different from 8.
+
+config FB_MATROX_G
+	bool "G100/G200/G400/G450/G550 support"
+	depends on FB_MATROX
+	---help---
+	  Say Y here if you have a Matrox G100, G200, G400, G450 or G550 based
+	  video card. If you select "Advanced lowlevel driver options", you
+	  should check 8 bpp packed pixel, 16 bpp packed pixel, 24 bpp packed
+	  pixel and 32 bpp packed pixel. You can also use font widths
+	  different from 8.
+
+	  If you need support for G400 secondary head, you must say Y to
+	  "Matrox I2C support" and "G400 second head support" right below.
+	  G450/G550 secondary head and digital output are supported without
+	  additional modules.
+
+	  The driver starts in monitor mode. You must use the matroxset tool 
+	  (available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to 
+	  swap primary and secondary head outputs, or to change output mode.  
+	  Secondary head driver always start in 640x480 resolution and you 
+	  must use fbset to change it.
+
+	  Do not forget that second head supports only 16 and 32 bpp
+	  packed pixels, so it is a good idea to compile them into the kernel
+	  too. You can use only some font widths, as the driver uses generic
+	  painting procedures (the secondary head does not use acceleration
+	  engine).
+
+	  G450/G550 hardware can display TV picture only from secondary CRTC,
+	  and it performs no scaling, so picture must have 525 or 625 lines.
+
+config FB_MATROX_I2C
+	tristate "Matrox I2C support"
+	depends on FB_MATROX
+	select FB_DDC
+	---help---
+	  This drivers creates I2C buses which are needed for accessing the
+	  DDC (I2C) bus present on all Matroxes, an I2C bus which
+	  interconnects Matrox optional devices, like MGA-TVO on G200 and
+	  G400, and the secondary head DDC bus, present on G400 only.
+
+	  You can say Y or M here if you want to experiment with monitor
+	  detection code. You must say Y or M here if you want to use either
+	  second head of G400 or MGA-TVO on G200 or G400.
+
+	  If you compile it as module, it will create a module named
+	  i2c-matroxfb.
+
+config FB_MATROX_MAVEN
+	tristate "G400 second head support"
+	depends on FB_MATROX_G && FB_MATROX_I2C
+	---help---
+	  WARNING !!! This support does not work with G450 !!!
+
+	  Say Y or M here if you want to use a secondary head (meaning two
+	  monitors in parallel) on G400 or MGA-TVO add-on on G200. Secondary
+	  head is not compatible with accelerated XFree 3.3.x SVGA servers -
+	  secondary head output is blanked while you are in X. With XFree
+	  3.9.17 preview you can use both heads if you use SVGA over fbdev or
+	  the fbdev driver on first head and the fbdev driver on second head.
+
+	  If you compile it as module, two modules are created,
+	  matroxfb_crtc2 and matroxfb_maven. Matroxfb_maven is needed for
+	  both G200 and G400, matroxfb_crtc2 is needed only by G400. You must
+	  also load i2c-matroxfb to get it to run.
+
+	  The driver starts in monitor mode and you must use the matroxset
+	  tool (available at
+	  <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to switch it to
+	  PAL or NTSC or to swap primary and secondary head outputs.
+	  Secondary head driver also always start in 640x480 resolution, you
+	  must use fbset to change it.
+
+	  Also do not forget that second head supports only 16 and 32 bpp
+	  packed pixels, so it is a good idea to compile them into the kernel
+	  too.  You can use only some font widths, as the driver uses generic
+	  painting procedures (the secondary head does not use acceleration
+	  engine).
+
+config FB_RADEON
+	tristate "ATI Radeon display support"
+	depends on FB && PCI
+	select FB_BACKLIGHT if FB_RADEON_BACKLIGHT
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MACMODES if PPC_OF
+	help
+	  Choose this option if you want to use an ATI Radeon graphics card as
+	  a framebuffer device.  There are both PCI and AGP versions.  You
+	  don't need to choose this to run the Radeon in plain VGA mode.
+
+	  There is a product page at
+	  http://products.amd.com/en-us/GraphicCardResult.aspx
+
+config FB_RADEON_I2C
+	bool "DDC/I2C for ATI Radeon support"
+	depends on FB_RADEON
+	select FB_DDC
+	default y
+	help
+	  Say Y here if you want DDC/I2C support for your Radeon board. 
+
+config FB_RADEON_BACKLIGHT
+	bool "Support for backlight control"
+	depends on FB_RADEON
+	default y
+	help
+	  Say Y here if you want to control the backlight of your display.
+
+config FB_RADEON_DEBUG
+	bool "Lots of debug output from Radeon driver"
+	depends on FB_RADEON
+	default n
+	help
+	  Say Y here if you want the Radeon driver to output all sorts
+	  of debugging information to provide to the maintainer when
+	  something goes wrong.
+
+config FB_ATY128
+	tristate "ATI Rage128 display support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_BACKLIGHT if FB_ATY128_BACKLIGHT
+	select FB_MACMODES if PPC_PMAC
+	help
+	  This driver supports graphics boards with the ATI Rage128 chips.
+	  Say Y if you have such a graphics board and read
+	  <file:Documentation/fb/aty128fb.txt>.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called aty128fb.
+
+config FB_ATY128_BACKLIGHT
+	bool "Support for backlight control"
+	depends on FB_ATY128
+	default y
+	help
+	  Say Y here if you want to control the backlight of your display.
+
+config FB_ATY
+	tristate "ATI Mach64 display support" if PCI || ATARI
+	depends on FB && !SPARC32
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_BACKLIGHT if FB_ATY_BACKLIGHT
+	select FB_MACMODES if PPC
+	help
+	  This driver supports graphics boards with the ATI Mach64 chips.
+	  Say Y if you have such a graphics board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called atyfb.
+
+config FB_ATY_CT
+	bool "Mach64 CT/VT/GT/LT (incl. 3D RAGE) support"
+	depends on PCI && FB_ATY
+	default y if SPARC64 && PCI
+	help
+	  Say Y here to support use of ATI's 64-bit Rage boards (or other
+	  boards based on the Mach64 CT, VT, GT, and LT chipsets) as a
+	  framebuffer device.  The ATI product support page for these boards
+	  is at <http://support.ati.com/products/pc/mach64/mach64.html>.
+
+config FB_ATY_GENERIC_LCD
+	bool "Mach64 generic LCD support"
+	depends on FB_ATY_CT
+	help
+	  Say Y if you have a laptop with an ATI Rage LT PRO, Rage Mobility,
+	  Rage XC, or Rage XL chipset.
+
+config FB_ATY_GX
+	bool "Mach64 GX support" if PCI
+	depends on FB_ATY
+	default y if ATARI
+	help
+	  Say Y here to support use of the ATI Mach64 Graphics Expression
+	  board (or other boards based on the Mach64 GX chipset) as a
+	  framebuffer device.  The ATI product support page for these boards
+	  is at
+	  <http://support.ati.com/products/pc/mach64/graphics_xpression.html>.
+
+config FB_ATY_BACKLIGHT
+	bool "Support for backlight control"
+	depends on FB_ATY
+	default y
+	help
+	  Say Y here if you want to control the backlight of your display.
+
+config FB_S3
+	tristate "S3 Trio/Virge support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_TILEBLITTING
+	select FB_SVGALIB
+	select VGASTATE
+	select FONT_8x16 if FRAMEBUFFER_CONSOLE
+	---help---
+	  Driver for graphics boards with S3 Trio / S3 Virge chip.
+
+config FB_S3_DDC
+	bool "DDC for S3 support"
+	depends on FB_S3
+	select FB_DDC
+	default y
+	help
+	  Say Y here if you want DDC support for your S3 graphics card.
+
+config FB_SAVAGE
+	tristate "S3 Savage support"
+	depends on FB && PCI
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select VGASTATE
+	help
+	  This driver supports notebooks and computers with S3 Savage PCI/AGP
+	  chips.
+
+	  Say Y if you have such a graphics card.
+
+	  To compile this driver as a module, choose M here; the module
+	  will be called savagefb.
+
+config FB_SAVAGE_I2C
+       bool "Enable DDC2 Support"
+       depends on FB_SAVAGE
+       select FB_DDC
+       help
+	  This enables I2C support for S3 Savage Chipsets.  This is used
+	  only for getting EDID information from the attached display
+	  allowing for robust video mode handling and switching.
+
+	  Because fbdev-2.6 requires that drivers must be able to
+	  independently validate video mode parameters, you should say Y
+	  here.
+
+config FB_SAVAGE_ACCEL
+       bool "Enable Console Acceleration"
+       depends on FB_SAVAGE
+       default n
+       help
+          This option will compile in console acceleration support. If
+          the resulting framebuffer console has bothersome glitches, then
+          choose N here.
+
+config FB_SIS
+	tristate "SiS/XGI display support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_BOOT_VESA_SUPPORT if FB_SIS = y
+	help
+	  This is the frame buffer device driver for the SiS 300, 315, 330
+	  and 340 series as well as XGI V3XT, V5, V8, Z7 graphics chipsets.
+	  Specs available at <http://www.sis.com> and <http://www.xgitech.com>.
+
+	  To compile this driver as a module, choose M here; the module
+	  will be called sisfb.
+
+config FB_SIS_300
+	bool "SiS 300 series support"
+	depends on FB_SIS
+	help
+	  Say Y here to support use of the SiS 300/305, 540, 630 and 730.
+
+config FB_SIS_315
+	bool "SiS 315/330/340 series and XGI support"
+	depends on FB_SIS
+	help
+	  Say Y here to support use of the SiS 315, 330 and 340 series
+	  (315/H/PRO, 55x, 650, 651, 740, 330, 661, 741, 760, 761) as well
+	  as XGI V3XT, V5, V8 and Z7.
+
+config FB_VIA
+       tristate "VIA UniChrome (Pro) and Chrome9 display support"
+       depends on FB && PCI && X86
+       select FB_CFB_FILLRECT
+       select FB_CFB_COPYAREA
+       select FB_CFB_IMAGEBLIT
+       select I2C_ALGOBIT
+       select I2C
+       select GPIOLIB
+       help
+	  This is the frame buffer device driver for Graphics chips of VIA
+	  UniChrome (Pro) Family (CLE266,PM800/CN400,P4M800CE/P4M800Pro/
+	  CN700/VN800,CX700/VX700,P4M890) and Chrome9 Family (K8M890,CN896
+ 	  /P4M900,VX800)
+	  Say Y if you have a VIA UniChrome graphics board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called viafb.
+
+if FB_VIA
+
+config FB_VIA_DIRECT_PROCFS
+	bool "direct hardware access via procfs (DEPRECATED)(DANGEROUS)"
+	depends on FB_VIA
+	default n
+	help
+	  Allow direct hardware access to some output registers via procfs.
+	  This is dangerous but may provide the only chance to get the
+	  correct output device configuration.
+	  Its use is strongly discouraged.
+
+config FB_VIA_X_COMPATIBILITY
+	bool "X server compatibility"
+	depends on FB_VIA
+	default n
+	help
+	  This option reduces the functionality (power saving, ...) of the
+	  framebuffer to avoid negative impact on the OpenChrome X server.
+	  If you use any X server other than fbdev you should enable this
+	  otherwise it should be safe to disable it and allow using all
+	  features.
+
+endif
+
+config FB_NEOMAGIC
+	tristate "NeoMagic display support"
+	depends on FB && PCI
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select VGASTATE
+	help
+	  This driver supports notebooks with NeoMagic PCI chips.
+	  Say Y if you have such a graphics card. 
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called neofb.
+
+config FB_KYRO
+	tristate "IMG Kyro support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  Say Y here if you have a STG4000 / Kyro / PowerVR 3 based
+	  graphics board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called kyrofb.
+
+config FB_3DFX
+	tristate "3Dfx Banshee/Voodoo3/Voodoo5 display support"
+	depends on FB && PCI
+	select FB_CFB_IMAGEBLIT
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_MODE_HELPERS
+	help
+	  This driver supports graphics boards with the 3Dfx Banshee,
+	  Voodoo3 or VSA-100 (aka Voodoo4/5) chips. Say Y if you have
+	  such a graphics board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tdfxfb.
+
+config FB_3DFX_ACCEL
+	bool "3Dfx Acceleration functions"
+	depends on FB_3DFX
+	---help---
+	This will compile the 3Dfx Banshee/Voodoo3/VSA-100 frame buffer
+	device driver with acceleration functions.
+
+config FB_3DFX_I2C
+	bool "Enable DDC/I2C support"
+	depends on FB_3DFX
+	select FB_DDC
+	default y
+	help
+	  Say Y here if you want DDC/I2C support for your 3dfx Voodoo3.
+
+config FB_VOODOO1
+	tristate "3Dfx Voodoo Graphics (sst1) support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Say Y here if you have a 3Dfx Voodoo Graphics (Voodoo1/sst1) or 
+	  Voodoo2 (cvg) based graphics card.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sstfb.
+
+	  WARNING: Do not use any application that uses the 3D engine
+	  (namely glide) while using this driver.
+	  Please read the <file:Documentation/fb/sstfb.txt> for supported
+	  options and other important info  support.
+
+config FB_VT8623
+	tristate "VIA VT8623 support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_TILEBLITTING
+	select FB_SVGALIB
+	select VGASTATE
+	select FONT_8x16 if FRAMEBUFFER_CONSOLE
+	---help---
+	  Driver for CastleRock integrated graphics core in the
+	  VIA VT8623 [Apollo CLE266] chipset.
+
+config FB_TRIDENT
+	tristate "Trident/CyberXXX/CyberBlade support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  This is the frame buffer device driver for Trident PCI/AGP chipsets.
+	  Supported chipset families are TGUI 9440/96XX, 3DImage, Blade3D
+	  and Blade XP.
+	  There are also integrated versions of these chips called CyberXXXX,
+	  CyberImage or CyberBlade. These chips are mostly found in laptops
+	  but also on some motherboards including early VIA EPIA motherboards.
+	  For more information, read <file:Documentation/fb/tridentfb.txt>
+
+	  Say Y if you have such a graphics board.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tridentfb.
+
+config FB_ARK
+	tristate "ARK 2000PV support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_TILEBLITTING
+	select FB_SVGALIB
+	select VGASTATE
+	select FONT_8x16 if FRAMEBUFFER_CONSOLE
+	---help---
+	  Driver for PCI graphics boards with ARK 2000PV chip
+	  and ICS 5342 RAMDAC.
+
+config FB_PM3
+	tristate "Permedia3 support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the 3DLabs Permedia3
+	  chipset, used in Formac ProFormance III, 3DLabs Oxygen VX1 &
+	  similar boards, 3DLabs Permedia3 Create!, Appian Jeronimo 2000
+	  and maybe other boards.
+
+config FB_CARMINE
+	tristate "Fujitsu carmine frame buffer support"
+	depends on FB && PCI
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Fujitsu Carmine chip.
+	  The driver provides two independent frame buffer devices.
+
+choice
+	depends on FB_CARMINE
+	prompt "DRAM timing"
+	default FB_CARMINE_DRAM_EVAL
+
+config FB_CARMINE_DRAM_EVAL
+	bool "Eval board timings"
+	help
+	  Use timings which work on the eval card.
+
+config CARMINE_DRAM_CUSTOM
+	bool "Custom board timings"
+	help
+	  Use custom board timings.
+endchoice
+
+config FB_AU1100
+	bool "Au1100 LCD Driver"
+	depends on (FB = y) && MIPS_ALCHEMY
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the framebuffer driver for the AMD Au1100 SOC.  It can drive
+	  various panels and CRTs by passing in kernel cmd line option
+	  au1100fb:panel=<name>.
+
+config FB_AU1200
+	bool "Au1200/Au1300 LCD Driver"
+	depends on (FB = y) && MIPS_ALCHEMY
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	help
+	  This is the framebuffer driver for the Au1200/Au1300 SOCs.
+	  It can drive various panels and CRTs by passing in kernel cmd line
+	  option au1200fb:panel=<name>.
+
+config FB_VT8500
+	bool "VIA VT8500 framebuffer support"
+	depends on (FB = y) && ARM && ARCH_VT8500
+	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
+	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
+	select FB_SYS_IMAGEBLIT
+	select FB_MODE_HELPERS
+	select VIDEOMODE_HELPERS
+	help
+	  This is the framebuffer driver for VIA VT8500 integrated LCD
+	  controller.
+
+config FB_WM8505
+	bool "Wondermedia WM8xxx-series frame buffer support"
+	depends on (FB = y) && ARM && ARCH_VT8500
+	select FB_SYS_FILLRECT if (!FB_WMT_GE_ROPS)
+	select FB_SYS_COPYAREA if (!FB_WMT_GE_ROPS)
+	select FB_SYS_IMAGEBLIT
+	select FB_MODE_HELPERS
+	select VIDEOMODE_HELPERS
+	help
+	  This is the framebuffer driver for WonderMedia WM8xxx-series
+	  integrated LCD controller. This driver covers the WM8505, WM8650
+	  and WM8850 SoCs.
+
+config FB_WMT_GE_ROPS
+	bool "VT8500/WM8xxx accelerated raster ops support"
+	depends on (FB = y) && (FB_VT8500 || FB_WM8505)
+	default n
+	help
+	  This adds support for accelerated raster operations on the
+	  VIA VT8500 and Wondermedia 85xx series SoCs.
+
+source "drivers/video/fbdev/geode/Kconfig"
+
+config FB_HIT
+	tristate "HD64461 Frame Buffer support"
+	depends on FB && HD64461
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This is the frame buffer device driver for the Hitachi HD64461 LCD
+	  frame buffer card.
+
+config FB_PMAG_AA
+	bool "PMAG-AA TURBOchannel framebuffer support"
+	depends on (FB = y) && TC
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+	help
+	  Support for the PMAG-AA TURBOchannel framebuffer card (1280x1024x1)
+	  used mainly in the MIPS-based DECstation series.
+
+config FB_PMAG_BA
+	tristate "PMAG-BA TURBOchannel framebuffer support"
+	depends on FB && TC
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+	help
+	  Support for the PMAG-BA TURBOchannel framebuffer card (1024x864x8)
+	  used mainly in the MIPS-based DECstation series.
+
+config FB_PMAGB_B
+	tristate "PMAGB-B TURBOchannel framebuffer support"
+	depends on FB && TC
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+	help
+	  Support for the PMAGB-B TURBOchannel framebuffer card used mainly
+	  in the MIPS-based DECstation series. The card is currently only
+	  supported in 1280x1024x8 mode.
+
+config FB_MAXINE
+	bool "Maxine (Personal DECstation) onboard framebuffer support"
+	depends on (FB = y) && MACH_DECSTATION
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+	help
+	  Support for the onboard framebuffer (1024x768x8) in the Personal
+	  DECstation series (Personal DECstation 5000/20, /25, /33, /50,
+	  Codename "Maxine").
+
+config FB_G364
+	bool "G364 frame buffer support"
+	depends on (FB = y) && (MIPS_MAGNUM_4000 || OLIVETTI_M700)
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+	help
+	  The G364 driver is the framebuffer used in MIPS Magnum 4000 and
+	  Olivetti M700-10 systems.
+
+config FB_68328
+	bool "Motorola 68328 native frame buffer support"
+	depends on (FB = y) && (M68328 || M68EZ328 || M68VZ328)
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+	help
+	  Say Y here if you want to support the built-in frame buffer of
+	  the Motorola 68328 CPU family.
+
+config FB_PXA168
+	tristate "PXA168/910 LCD framebuffer support"
+	depends on FB && (CPU_PXA168 || CPU_PXA910)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the built-in LCD controller in the Marvell
+	  MMP processor.
+
+config FB_PXA
+	tristate "PXA LCD framebuffer support"
+	depends on FB && ARCH_PXA
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the built-in LCD controller in the Intel
+	  PXA2x0 processor.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted and removed from the running kernel whenever you want). The
+	  module will be called pxafb. If you want to compile it as a module,
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
+
+	  If unsure, say N.
+
+config FB_PXA_OVERLAY
+	bool "Support PXA27x/PXA3xx Overlay(s) as framebuffer"
+	default n
+	depends on FB_PXA && (PXA27x || PXA3xx)
+
+config FB_PXA_SMARTPANEL
+	bool "PXA Smartpanel LCD support"
+	default n
+	depends on FB_PXA
+
+config FB_PXA_PARAMETERS
+	bool "PXA LCD command line parameters"
+	default n
+	depends on FB_PXA
+	---help---
+	  Enable the use of kernel command line or module parameters
+	  to configure the physical properties of the LCD panel when
+	  using the PXA LCD driver.
+
+	  This option allows you to override the panel parameters
+	  supplied by the platform in order to support multiple
+	  different models of flatpanel. If you will only be using a
+	  single model of flatpanel then you can safely leave this
+	  option disabled.
+
+	  <file:Documentation/fb/pxafb.txt> describes the available parameters.
+
+config PXA3XX_GCU
+	tristate "PXA3xx 2D graphics accelerator driver"
+	depends on FB_PXA
+	help
+	  Kernelspace driver for the 2D graphics controller unit (GCU)
+	  found on PXA3xx processors. There is a counterpart driver in the
+	  DirectFB suite, see http://www.directfb.org/
+
+	  If you compile this as a module, it will be called pxa3xx_gcu.
+
+config FB_MBX
+	tristate "2700G LCD framebuffer support"
+	depends on FB && ARCH_PXA
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Framebuffer driver for the Intel 2700G (Marathon) Graphics
+	  Accelerator
+
+config FB_MBX_DEBUG
+       bool "Enable debugging info via debugfs"
+       depends on FB_MBX && DEBUG_FS
+       default n
+       ---help---
+         Enable this if you want debugging information using the debug
+         filesystem (debugfs)
+
+         If unsure, say N.
+
+config FB_FSL_DIU
+	tristate "Freescale DIU framebuffer support"
+	depends on FB && FSL_SOC
+	select FB_MODE_HELPERS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select PPC_LIB_RHEAP
+	---help---
+	  Framebuffer driver for the Freescale SoC DIU
+
+config FB_W100
+	tristate "W100 frame buffer support"
+	depends on FB && ARCH_PXA
+ 	select FB_CFB_FILLRECT
+ 	select FB_CFB_COPYAREA
+ 	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the w100 as found on the Sharp SL-Cxx series.
+	  It can also drive the w3220 chip found on iPAQ hx4700.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted and removed from the running kernel whenever you want). The
+	  module will be called w100fb. If you want to compile it as a module,
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
+
+	  If unsure, say N.
+
+config FB_SH_MOBILE_LCDC
+	tristate "SuperH Mobile LCDC framebuffer support"
+	depends on FB && (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	select FB_BACKLIGHT
+	select SH_MIPI_DSI if SH_LCD_MIPI_DSI
+	---help---
+	  Frame buffer driver for the on-chip SH-Mobile LCD controller.
+
+config FB_SH_MOBILE_HDMI
+	tristate "SuperH Mobile HDMI controller support"
+	depends on FB_SH_MOBILE_LCDC
+	select FB_MODE_HELPERS
+	select SOUND
+	select SND
+	select SND_SOC
+	---help---
+	  Driver for the on-chip SH-Mobile HDMI controller.
+
+config FB_TMIO
+	tristate "Toshiba Mobile IO FrameBuffer support"
+	depends on FB && MFD_CORE
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the Toshiba Mobile IO integrated as found
+	  on the Sharp SL-6000 series
+
+	  This driver is also available as a module ( = code which can be
+	  inserted and removed from the running kernel whenever you want). The
+	  module will be called tmiofb. If you want to compile it as a module,
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
+
+	  If unsure, say N.
+
+config FB_TMIO_ACCELL
+	bool "tmiofb acceleration"
+	depends on FB_TMIO
+	default y
+
+config FB_S3C
+	tristate "Samsung S3C framebuffer support"
+	depends on FB && (CPU_S3C2416 || ARCH_S3C64XX || ARCH_S5P64X0 || \
+		ARCH_S5PC100 || ARCH_S5PV210 || ARCH_EXYNOS)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the built-in FB controller in the Samsung
+	  SoC line from the S3C2443 onwards, including the S3C2416, S3C2450,
+	  and the S3C64XX series such as the S3C6400 and S3C6410.
+
+	  These chips all have the same basic framebuffer design with the
+	  actual capabilities depending on the chip. For instance the S3C6400
+	  and S3C6410 support 4 hardware windows whereas the S3C24XX series
+	  currently only have two.
+
+	  Currently the support is only for the S3C6400 and S3C6410 SoCs.
+
+config FB_S3C_DEBUG_REGWRITE
+       bool "Debug register writes"
+       depends on FB_S3C
+       ---help---
+         Show all register writes via pr_debug()
+
+config FB_S3C2410
+	tristate "S3C2410 LCD framebuffer support"
+	depends on FB && ARCH_S3C24XX
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the built-in LCD controller in the Samsung
+	  S3C2410 processor.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted and removed from the running kernel whenever you want). The
+	  module will be called s3c2410fb. If you want to compile it as a module,
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
+
+	  If unsure, say N.
+config FB_S3C2410_DEBUG
+	bool "S3C2410 lcd debug messages"
+	depends on FB_S3C2410
+	help
+	  Turn on debugging messages. Note that you can set/unset at run time
+	  through sysfs
+
+config FB_NUC900
+        bool "NUC900 LCD framebuffer support"
+        depends on FB && ARCH_W90X900
+        select FB_CFB_FILLRECT
+        select FB_CFB_COPYAREA
+        select FB_CFB_IMAGEBLIT
+        ---help---
+          Frame buffer driver for the built-in LCD controller in the Nuvoton
+          NUC900 processor
+
+config GPM1040A0_320X240
+        bool "Giantplus Technology GPM1040A0 320x240 Color TFT LCD"
+        depends on FB_NUC900
+
+config FB_SM501
+	tristate "Silicon Motion SM501 framebuffer support"
+	depends on FB && MFD_SM501
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for the CRT and LCD controllers in the Silicon
+	  Motion SM501.
+
+	  This driver is also available as a module ( = code which can be
+	  inserted and removed from the running kernel whenever you want). The
+	  module will be called sm501fb. If you want to compile it as a module,
+	  say M here and read <file:Documentation/kbuild/modules.txt>.
+
+	  If unsure, say N.
+
+config FB_SMSCUFX
+	tristate "SMSC UFX6000/7000 USB Framebuffer support"
+	depends on FB && USB
+	select FB_MODE_HELPERS
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	---help---
+	  This is a kernel framebuffer driver for SMSC UFX USB devices.
+	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
+	  mplayer -vo fbdev. Supports both UFX6000 (USB 2.0) and UFX7000
+	  (USB 3.0) devices.
+	  To compile as a module, choose M here: the module name is smscufx.
+
+config FB_UDL
+	tristate "Displaylink USB Framebuffer support"
+	depends on FB && USB
+	select FB_MODE_HELPERS
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	---help---
+	  This is a kernel framebuffer driver for DisplayLink USB devices.
+	  Supports fbdev clients like xf86-video-fbdev, kdrive, fbi, and
+	  mplayer -vo fbdev. Supports all USB 2.0 era DisplayLink devices.
+	  To compile as a module, choose M here: the module name is udlfb.
+
+config FB_IBM_GXT4500
+	tristate "Framebuffer support for IBM GXT4000P/4500P/6000P/6500P adaptors"
+	depends on FB && PPC
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Say Y here to enable support for the IBM GXT4000P/6000P and
+	  GXT4500P/6500P display adaptor based on Raster Engine RC1000,
+	  found on some IBM System P (pSeries) machines. This driver
+	  doesn't use Geometry Engine GT1000.
+
+config FB_PS3
+	tristate "PS3 GPU framebuffer driver"
+	depends on FB && PS3_PS3AV
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select VT_HW_CONSOLE_BINDING if FRAMEBUFFER_CONSOLE
+	---help---
+	  Include support for the virtual frame buffer in the PS3 platform.
+
+config FB_PS3_DEFAULT_SIZE_M
+	int "PS3 default frame buffer size (in MiB)"
+	depends on FB_PS3
+	default 9
+	---help---
+	  This is the default size (in MiB) of the virtual frame buffer in
+	  the PS3.
+	  The default value can be overridden on the kernel command line
+	  using the "ps3fb" option (e.g. "ps3fb=9M");
+
+config FB_XILINX
+	tristate "Xilinx frame buffer support"
+	depends on FB && (XILINX_VIRTEX || MICROBLAZE || ARCH_ZYNQ)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Include support for the Xilinx ML300/ML403 reference design
+	  framebuffer. ML300 carries a 640*480 LCD display on the board,
+	  ML403 uses a standard DB15 VGA connector.
+
+config FB_GOLDFISH
+	tristate "Goldfish Framebuffer"
+	depends on FB && HAS_DMA
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Framebuffer driver for Goldfish Virtual Platform
+
+config FB_COBALT
+	tristate "Cobalt server LCD frame buffer support"
+	depends on FB && (MIPS_COBALT || MIPS_SEAD3)
+
+config FB_SH7760
+	bool "SH7760/SH7763/SH7720/SH7721 LCDC support"
+	depends on FB && (CPU_SUBTYPE_SH7760 || CPU_SUBTYPE_SH7763 \
+		|| CPU_SUBTYPE_SH7720 || CPU_SUBTYPE_SH7721)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Support for the SH7760/SH7763/SH7720/SH7721 integrated
+	  (D)STN/TFT LCD Controller.
+	  Supports display resolutions up to 1024x1024 pixel, grayscale and
+	  color operation, with depths ranging from 1 bpp to 8 bpp monochrome
+	  and 8, 15 or 16 bpp color; 90 degrees clockwise display rotation for
+	  panels <= 320 pixel horizontal resolution.
+
+config FB_DA8XX
+	tristate "DA8xx/OMAP-L1xx/AM335x Framebuffer support"
+	depends on FB && (ARCH_DAVINCI_DA8XX || SOC_AM33XX)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_CFB_REV_PIXELS_IN_BYTE
+	select FB_MODE_HELPERS
+	select VIDEOMODE_HELPERS
+	---help---
+	  This is the frame buffer device driver for the TI LCD controller
+	  found on DA8xx/OMAP-L1xx/AM335x SoCs.
+	  If unsure, say N.
+
+config FB_VIRTUAL
+	tristate "Virtual Frame Buffer support (ONLY FOR TESTING!)"
+	depends on FB
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	---help---
+	  This is a `virtual' frame buffer device. It operates on a chunk of
+	  unswappable kernel memory instead of on the memory of a graphics
+	  board. This means you cannot see any output sent to this frame
+	  buffer device, while it does consume precious memory. The main use
+	  of this frame buffer device is testing and debugging the frame
+	  buffer subsystem. Do NOT enable it for normal systems! To protect
+	  the innocent, it has to be enabled explicitly at boot time using the
+	  kernel option `video=vfb:'.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called vfb. In order to load it, you must use
+	  the vfb_enable=1 option.
+
+	  If unsure, say N.
+
+config XEN_FBDEV_FRONTEND
+	tristate "Xen virtual frame buffer support"
+	depends on FB && XEN
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	select INPUT_XEN_KBDDEV_FRONTEND if INPUT_MISC
+	select XEN_XENBUS_FRONTEND
+	default y
+	help
+	  This driver implements the front-end of the Xen virtual
+	  frame buffer driver.  It communicates with a back-end
+	  in another domain.
+
+config FB_METRONOME
+	tristate "E-Ink Metronome/8track controller support"
+	depends on FB
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	help
+	  This driver implements support for the E-Ink Metronome
+	  controller. The pre-release name for this device was 8track
+	  and could also have been called by some vendors as PVI-nnnn.
+
+config FB_MB862XX
+	tristate "Fujitsu MB862xx GDC support"
+	depends on FB
+	depends on PCI || (OF && PPC)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Frame buffer driver for Fujitsu Carmine/Coral-P(A)/Lime controllers.
+
+choice
+	prompt "GDC variant"
+	depends on FB_MB862XX
+
+config FB_MB862XX_PCI_GDC
+	bool "Carmine/Coral-P(A) GDC"
+	depends on PCI
+	---help---
+	  This enables framebuffer support for Fujitsu Carmine/Coral-P(A)
+	  PCI graphics controller devices.
+
+config FB_MB862XX_LIME
+	bool "Lime GDC"
+	depends on OF && PPC
+	select FB_FOREIGN_ENDIAN
+	select FB_LITTLE_ENDIAN
+	---help---
+	  Framebuffer support for Fujitsu Lime GDC on host CPU bus.
+
+endchoice
+
+config FB_MB862XX_I2C
+	bool "Support I2C bus on MB862XX GDC"
+	depends on FB_MB862XX && I2C
+	default y
+	help
+	  Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
+	  driver to support accessing I2C devices on controller's I2C bus.
+	  These are usually some video decoder chips.
+
+config FB_EP93XX
+	tristate "EP93XX frame buffer support"
+	depends on FB && ARCH_EP93XX
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	---help---
+	  Framebuffer driver for the Cirrus Logic EP93XX series of processors.
+	  This driver is also available as a module. The module will be called
+	  ep93xx-fb.
+
+config FB_PRE_INIT_FB
+	bool "Don't reinitialize, use bootloader's GDC/Display configuration"
+	depends on FB && FB_MB862XX_LIME
+	---help---
+	  Select this option if display contents should be inherited as set by
+	  the bootloader.
+
+config FB_MSM
+	tristate "MSM Framebuffer support"
+	depends on FB && ARCH_MSM
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+
+config FB_MX3
+	tristate "MX3 Framebuffer support"
+	depends on FB && MX3_IPU
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	default y
+	help
+	  This is a framebuffer device for the i.MX31 LCD Controller. So
+	  far only synchronous displays are supported. If you plan to use
+	  an LCD display with your i.MX31 system, say Y here.
+
+config FB_BROADSHEET
+	tristate "E-Ink Broadsheet/Epson S1D13521 controller support"
+	depends on FB
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	help
+	  This driver implements support for the E-Ink Broadsheet
+	  controller. The release name for this device was Epson S1D13521
+	  and could also have been called by other names when coupled with
+	  a bridge adapter.
+
+config FB_AUO_K190X
+	tristate "AUO-K190X EPD controller support"
+	depends on FB
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	select FB_DEFERRED_IO
+	help
+	  Provides support for epaper controllers from the K190X series
+	  of AUO. These controllers can be used to drive epaper displays
+	  from Sipix.
+
+	  This option enables the common support, shared by the individual
+	  controller drivers. You will also have to enable the driver
+	  for the controller type used in your device.
+
+config FB_AUO_K1900
+	tristate "AUO-K1900 EPD controller support"
+	depends on FB && FB_AUO_K190X
+	help
+	  This driver implements support for the AUO K1900 epd-controller.
+	  This controller can drive Sipix epaper displays but can only do
+	  serial updates, reducing the number of possible frames per second.
+
+config FB_AUO_K1901
+	tristate "AUO-K1901 EPD controller support"
+	depends on FB && FB_AUO_K190X
+	help
+	  This driver implements support for the AUO K1901 epd-controller.
+	  This controller can drive Sipix epaper displays and supports
+	  concurrent updates, making higher frames per second possible.
+
+config FB_JZ4740
+	tristate "JZ4740 LCD framebuffer support"
+	depends on FB && MACH_JZ4740
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	help
+	  Framebuffer support for the JZ4740 SoC.
+
+config FB_MXS
+	tristate "MXS LCD framebuffer support"
+	depends on FB && ARCH_MXS
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	select FB_MODE_HELPERS
+	select VIDEOMODE_HELPERS
+	help
+	  Framebuffer support for the MXS SoC.
+
+config FB_PUV3_UNIGFX
+	tristate "PKUnity v3 Unigfx framebuffer support"
+	depends on FB && UNICORE32 && ARCH_PUV3
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_SYS_FOPS
+	help
+	  Choose this option if you want to use the Unigfx device as a
+	  framebuffer device. Without the support of PCI & AGP.
+
+config FB_HYPERV
+	tristate "Microsoft Hyper-V Synthetic Video support"
+	depends on FB && HYPERV
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  This framebuffer driver supports Microsoft Hyper-V Synthetic Video.
+
+config FB_SIMPLE
+	bool "Simple framebuffer support"
+	depends on (FB = y)
+	select FB_CFB_FILLRECT
+	select FB_CFB_COPYAREA
+	select FB_CFB_IMAGEBLIT
+	help
+	  Say Y if you want support for a simple frame-buffer.
+
+	  This driver assumes that the display hardware has been initialized
+	  before the kernel boots, and the kernel will simply render to the
+	  pre-allocated frame buffer surface.
+
+	  Configuration re: surface address, size, and format must be provided
+	  through device tree, or plain old platform data.
+
+source "drivers/video/fbdev/omap/Kconfig"
+source "drivers/video/fbdev/omap2/Kconfig"
+source "drivers/video/fbdev/exynos/Kconfig"
+source "drivers/video/fbdev/mmp/Kconfig"
+
+config FB_SH_MOBILE_MERAM
+	tristate "SuperH Mobile MERAM read ahead support"
+	depends on (SUPERH || ARCH_SHMOBILE)
+	select GENERIC_ALLOCATOR
+	---help---
+	  Enable MERAM support for the SuperH controller.
+
+	  This will allow for caching of the framebuffer to provide more
+	  reliable access under heavy main memory bus traffic situations.
+	  Up to 4 memory channels can be configured, allowing 4 RGB or
+	  2 YCbCr framebuffers to be configured.
+
+config FB_SSD1307
+	tristate "Solomon SSD1307 framebuffer support"
+	depends on FB && I2C
+	depends on OF
+	depends on GPIOLIB
+	select FB_SYS_FOPS
+	select FB_SYS_FILLRECT
+	select FB_SYS_COPYAREA
+	select FB_SYS_IMAGEBLIT
+	select FB_DEFERRED_IO
+	select PWM
+	help
+	  This driver implements support for the Solomon SSD1307
+	  OLED controller over I2C.
diff --git a/drivers/video/fbdev/Makefile b/drivers/video/fbdev/Makefile
new file mode 100644
index 000000000000..0284f2a12538
--- /dev/null
+++ b/drivers/video/fbdev/Makefile
@@ -0,0 +1,152 @@
+# Makefile for the Linux video drivers.
+# 5 Aug 1999, James Simmons, <mailto:jsimmons@users.sf.net>
+# Rewritten to use lists instead of if-statements.
+
+# Each configuration option enables a list of files.
+
+obj-y				+= core/
+
+obj-$(CONFIG_EXYNOS_VIDEO)     += exynos/
+
+obj-$(CONFIG_FB_MACMODES)      += macmodes.o
+obj-$(CONFIG_FB_WMT_GE_ROPS)   += wmt_ge_rops.o
+
+# Hardware specific drivers go first
+obj-$(CONFIG_FB_AMIGA)            += amifb.o c2p_planar.o
+obj-$(CONFIG_FB_ARC)              += arcfb.o
+obj-$(CONFIG_FB_CLPS711X)         += clps711xfb.o
+obj-$(CONFIG_FB_CYBER2000)        += cyber2000fb.o
+obj-$(CONFIG_FB_GRVGA)            += grvga.o
+obj-$(CONFIG_FB_PM2)              += pm2fb.o
+obj-$(CONFIG_FB_PM3)		  += pm3fb.o
+
+obj-$(CONFIG_FB_I740)		  += i740fb.o
+obj-$(CONFIG_FB_MATROX)		  += matrox/
+obj-$(CONFIG_FB_RIVA)		  += riva/
+obj-$(CONFIG_FB_NVIDIA)		  += nvidia/
+obj-$(CONFIG_FB_ATY)		  += aty/ macmodes.o
+obj-$(CONFIG_FB_ATY128)		  += aty/ macmodes.o
+obj-$(CONFIG_FB_RADEON)		  += aty/
+obj-$(CONFIG_FB_SIS)		  += sis/
+obj-$(CONFIG_FB_VIA)		  += via/
+obj-$(CONFIG_FB_KYRO)             += kyro/
+obj-$(CONFIG_FB_SAVAGE)		  += savage/
+obj-$(CONFIG_FB_GEODE)		  += geode/
+obj-$(CONFIG_FB_MBX)		  += mbx/
+obj-$(CONFIG_FB_NEOMAGIC)         += neofb.o
+obj-$(CONFIG_FB_3DFX)             += tdfxfb.o
+obj-$(CONFIG_FB_CONTROL)          += controlfb.o
+obj-$(CONFIG_FB_PLATINUM)         += platinumfb.o
+obj-$(CONFIG_FB_VALKYRIE)         += valkyriefb.o
+obj-$(CONFIG_FB_CT65550)          += chipsfb.o
+obj-$(CONFIG_FB_IMSTT)            += imsttfb.o
+obj-$(CONFIG_FB_FM2)              += fm2fb.o
+obj-$(CONFIG_FB_VT8623)           += vt8623fb.o
+obj-$(CONFIG_FB_TRIDENT)          += tridentfb.o
+obj-$(CONFIG_FB_LE80578)          += vermilion/
+obj-$(CONFIG_FB_S3)               += s3fb.o
+obj-$(CONFIG_FB_ARK)              += arkfb.o
+obj-$(CONFIG_FB_STI)              += stifb.o
+obj-$(CONFIG_FB_FFB)              += ffb.o sbuslib.o
+obj-$(CONFIG_FB_CG6)              += cg6.o sbuslib.o
+obj-$(CONFIG_FB_CG3)              += cg3.o sbuslib.o
+obj-$(CONFIG_FB_BW2)              += bw2.o sbuslib.o
+obj-$(CONFIG_FB_CG14)             += cg14.o sbuslib.o
+obj-$(CONFIG_FB_P9100)            += p9100.o sbuslib.o
+obj-$(CONFIG_FB_TCX)              += tcx.o sbuslib.o
+obj-$(CONFIG_FB_LEO)              += leo.o sbuslib.o
+obj-$(CONFIG_FB_ACORN)            += acornfb.o
+obj-$(CONFIG_FB_ATARI)            += atafb.o c2p_iplan2.o atafb_mfb.o \
+                                     atafb_iplan2p2.o atafb_iplan2p4.o atafb_iplan2p8.o
+obj-$(CONFIG_FB_MAC)              += macfb.o
+obj-$(CONFIG_FB_HECUBA)           += hecubafb.o
+obj-$(CONFIG_FB_N411)             += n411.o
+obj-$(CONFIG_FB_HGA)              += hgafb.o
+obj-$(CONFIG_FB_XVR500)           += sunxvr500.o
+obj-$(CONFIG_FB_XVR2500)          += sunxvr2500.o
+obj-$(CONFIG_FB_XVR1000)          += sunxvr1000.o
+obj-$(CONFIG_FB_IGA)              += igafb.o
+obj-$(CONFIG_FB_APOLLO)           += dnfb.o
+obj-$(CONFIG_FB_Q40)              += q40fb.o
+obj-$(CONFIG_FB_TGA)              += tgafb.o
+obj-$(CONFIG_FB_HP300)            += hpfb.o
+obj-$(CONFIG_FB_G364)             += g364fb.o
+obj-$(CONFIG_FB_EP93XX)		  += ep93xx-fb.o
+obj-$(CONFIG_FB_SA1100)           += sa1100fb.o
+obj-$(CONFIG_FB_HIT)              += hitfb.o
+obj-$(CONFIG_FB_ATMEL)		  += atmel_lcdfb.o
+obj-$(CONFIG_FB_PVR2)             += pvr2fb.o
+obj-$(CONFIG_FB_VOODOO1)          += sstfb.o
+obj-$(CONFIG_FB_ARMCLCD)	  += amba-clcd.o
+obj-$(CONFIG_FB_GOLDFISH)         += goldfishfb.o
+obj-$(CONFIG_FB_68328)            += 68328fb.o
+obj-$(CONFIG_FB_GBE)              += gbefb.o
+obj-$(CONFIG_FB_CIRRUS)		  += cirrusfb.o
+obj-$(CONFIG_FB_ASILIANT)	  += asiliantfb.o
+obj-$(CONFIG_FB_PXA)		  += pxafb.o
+obj-$(CONFIG_FB_PXA168)		  += pxa168fb.o
+obj-$(CONFIG_PXA3XX_GCU)	  += pxa3xx-gcu.o
+obj-$(CONFIG_MMP_DISP)           += mmp/
+obj-$(CONFIG_FB_W100)		  += w100fb.o
+obj-$(CONFIG_FB_TMIO)		  += tmiofb.o
+obj-$(CONFIG_FB_AU1100)		  += au1100fb.o
+obj-$(CONFIG_FB_AU1200)		  += au1200fb.o
+obj-$(CONFIG_FB_VT8500)		  += vt8500lcdfb.o
+obj-$(CONFIG_FB_WM8505)		  += wm8505fb.o
+obj-$(CONFIG_FB_PMAG_AA)	  += pmag-aa-fb.o
+obj-$(CONFIG_FB_PMAG_BA)	  += pmag-ba-fb.o
+obj-$(CONFIG_FB_PMAGB_B)	  += pmagb-b-fb.o
+obj-$(CONFIG_FB_MAXINE)		  += maxinefb.o
+obj-$(CONFIG_FB_METRONOME)        += metronomefb.o
+obj-$(CONFIG_FB_BROADSHEET)       += broadsheetfb.o
+obj-$(CONFIG_FB_AUO_K190X)	  += auo_k190x.o
+obj-$(CONFIG_FB_AUO_K1900)	  += auo_k1900fb.o
+obj-$(CONFIG_FB_AUO_K1901)	  += auo_k1901fb.o
+obj-$(CONFIG_FB_S1D13XXX)	  += s1d13xxxfb.o
+obj-$(CONFIG_FB_SH7760)		  += sh7760fb.o
+obj-$(CONFIG_FB_IMX)              += imxfb.o
+obj-$(CONFIG_FB_S3C)		  += s3c-fb.o
+obj-$(CONFIG_FB_S3C2410)	  += s3c2410fb.o
+obj-$(CONFIG_FB_FSL_DIU)	  += fsl-diu-fb.o
+obj-$(CONFIG_FB_COBALT)           += cobalt_lcdfb.o
+obj-$(CONFIG_FB_IBM_GXT4500)	  += gxt4500.o
+obj-$(CONFIG_FB_PS3)		  += ps3fb.o
+obj-$(CONFIG_FB_SM501)            += sm501fb.o
+obj-$(CONFIG_FB_UDL)		  += udlfb.o
+obj-$(CONFIG_FB_SMSCUFX)	  += smscufx.o
+obj-$(CONFIG_FB_XILINX)           += xilinxfb.o
+obj-$(CONFIG_SH_MIPI_DSI)	  += sh_mipi_dsi.o
+obj-$(CONFIG_FB_SH_MOBILE_HDMI)	  += sh_mobile_hdmi.o
+obj-$(CONFIG_FB_SH_MOBILE_MERAM)  += sh_mobile_meram.o
+obj-$(CONFIG_FB_SH_MOBILE_LCDC)	  += sh_mobile_lcdcfb.o
+obj-$(CONFIG_FB_OMAP)             += omap/
+obj-y                             += omap2/
+obj-$(CONFIG_XEN_FBDEV_FRONTEND)  += xen-fbfront.o
+obj-$(CONFIG_FB_CARMINE)          += carminefb.o
+obj-$(CONFIG_FB_MB862XX)	  += mb862xx/
+obj-$(CONFIG_FB_MSM)              += msm/
+obj-$(CONFIG_FB_NUC900)           += nuc900fb.o
+obj-$(CONFIG_FB_JZ4740)		  += jz4740_fb.o
+obj-$(CONFIG_FB_PUV3_UNIGFX)      += fb-puv3.o
+obj-$(CONFIG_FB_HYPERV)		  += hyperv_fb.o
+obj-$(CONFIG_FB_OPENCORES)	  += ocfb.o
+
+# Platform or fallback drivers go here
+obj-$(CONFIG_FB_UVESA)            += uvesafb.o
+obj-$(CONFIG_FB_VESA)             += vesafb.o
+obj-$(CONFIG_FB_EFI)              += efifb.o
+obj-$(CONFIG_FB_VGA16)            += vga16fb.o
+obj-$(CONFIG_FB_OF)               += offb.o
+obj-$(CONFIG_FB_BF537_LQ035)      += bf537-lq035.o
+obj-$(CONFIG_FB_BF54X_LQ043)	  += bf54x-lq043fb.o
+obj-$(CONFIG_FB_BFIN_LQ035Q1)     += bfin-lq035q1-fb.o
+obj-$(CONFIG_FB_BFIN_T350MCQB)	  += bfin-t350mcqb-fb.o
+obj-$(CONFIG_FB_BFIN_7393)        += bfin_adv7393fb.o
+obj-$(CONFIG_FB_MX3)		  += mx3fb.o
+obj-$(CONFIG_FB_DA8XX)		  += da8xx-fb.o
+obj-$(CONFIG_FB_MXS)		  += mxsfb.o
+obj-$(CONFIG_FB_SSD1307)	  += ssd1307fb.o
+obj-$(CONFIG_FB_SIMPLE)           += simplefb.o
+
+# the test framebuffer is last
+obj-$(CONFIG_FB_VIRTUAL)          += vfb.o
diff --git a/drivers/video/acornfb.c b/drivers/video/fbdev/acornfb.c
index a305caea58ee..a305caea58ee 100644
--- a/drivers/video/acornfb.c
+++ b/drivers/video/fbdev/acornfb.c
diff --git a/drivers/video/acornfb.h b/drivers/video/fbdev/acornfb.h
index 175c8ff3367c..175c8ff3367c 100644
--- a/drivers/video/acornfb.h
+++ b/drivers/video/fbdev/acornfb.h
diff --git a/drivers/video/amba-clcd.c b/drivers/video/fbdev/amba-clcd.c
index 14d6b3793e0a..14d6b3793e0a 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/fbdev/amba-clcd.c
diff --git a/drivers/video/amifb.c b/drivers/video/fbdev/amifb.c
index 518f790ef88a..518f790ef88a 100644
--- a/drivers/video/amifb.c
+++ b/drivers/video/fbdev/amifb.c
diff --git a/drivers/video/arcfb.c b/drivers/video/fbdev/arcfb.c
index 1b0b233b8b39..1b0b233b8b39 100644
--- a/drivers/video/arcfb.c
+++ b/drivers/video/fbdev/arcfb.c
diff --git a/drivers/video/arkfb.c b/drivers/video/fbdev/arkfb.c
index adc4ea2cc5a0..adc4ea2cc5a0 100644
--- a/drivers/video/arkfb.c
+++ b/drivers/video/fbdev/arkfb.c
diff --git a/drivers/video/asiliantfb.c b/drivers/video/fbdev/asiliantfb.c
index 7e8ddf00ccc2..7e8ddf00ccc2 100644
--- a/drivers/video/asiliantfb.c
+++ b/drivers/video/fbdev/asiliantfb.c
diff --git a/drivers/video/atafb.c b/drivers/video/fbdev/atafb.c
index e21d1f58554c..e21d1f58554c 100644
--- a/drivers/video/atafb.c
+++ b/drivers/video/fbdev/atafb.c
diff --git a/drivers/video/atafb.h b/drivers/video/fbdev/atafb.h
index 014e05906cb1..014e05906cb1 100644
--- a/drivers/video/atafb.h
+++ b/drivers/video/fbdev/atafb.h
diff --git a/drivers/video/atafb_iplan2p2.c b/drivers/video/fbdev/atafb_iplan2p2.c
index 8cc9c50379d0..8cc9c50379d0 100644
--- a/drivers/video/atafb_iplan2p2.c
+++ b/drivers/video/fbdev/atafb_iplan2p2.c
diff --git a/drivers/video/atafb_iplan2p4.c b/drivers/video/fbdev/atafb_iplan2p4.c
index bee0d89463f7..bee0d89463f7 100644
--- a/drivers/video/atafb_iplan2p4.c
+++ b/drivers/video/fbdev/atafb_iplan2p4.c
diff --git a/drivers/video/atafb_iplan2p8.c b/drivers/video/fbdev/atafb_iplan2p8.c
index 356fb52ce443..356fb52ce443 100644
--- a/drivers/video/atafb_iplan2p8.c
+++ b/drivers/video/fbdev/atafb_iplan2p8.c
diff --git a/drivers/video/atafb_mfb.c b/drivers/video/fbdev/atafb_mfb.c
index 6a352d62eecf..6a352d62eecf 100644
--- a/drivers/video/atafb_mfb.c
+++ b/drivers/video/fbdev/atafb_mfb.c
diff --git a/drivers/video/atafb_utils.h b/drivers/video/fbdev/atafb_utils.h
index ac9e19dc5057..ac9e19dc5057 100644
--- a/drivers/video/atafb_utils.h
+++ b/drivers/video/fbdev/atafb_utils.h
diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/fbdev/atmel_lcdfb.c
index e683b6ef9594..e683b6ef9594 100644
--- a/drivers/video/atmel_lcdfb.c
+++ b/drivers/video/fbdev/atmel_lcdfb.c
diff --git a/drivers/video/aty/Makefile b/drivers/video/fbdev/aty/Makefile
index a6cc0e9ec790..a6cc0e9ec790 100644
--- a/drivers/video/aty/Makefile
+++ b/drivers/video/fbdev/aty/Makefile
diff --git a/drivers/video/aty/ati_ids.h b/drivers/video/fbdev/aty/ati_ids.h
index 3e9d28bcd9f8..3e9d28bcd9f8 100644
--- a/drivers/video/aty/ati_ids.h
+++ b/drivers/video/fbdev/aty/ati_ids.h
diff --git a/drivers/video/aty/aty128fb.c b/drivers/video/fbdev/aty/aty128fb.c
index 52108be69e77..52108be69e77 100644
--- a/drivers/video/aty/aty128fb.c
+++ b/drivers/video/fbdev/aty/aty128fb.c
diff --git a/drivers/video/aty/atyfb.h b/drivers/video/fbdev/aty/atyfb.h
index 1f39a62f899b..1f39a62f899b 100644
--- a/drivers/video/aty/atyfb.h
+++ b/drivers/video/fbdev/aty/atyfb.h
diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/fbdev/aty/atyfb_base.c
index c3d0074a32db..c3d0074a32db 100644
--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/fbdev/aty/atyfb_base.c
diff --git a/drivers/video/aty/mach64_accel.c b/drivers/video/fbdev/aty/mach64_accel.c
index 182bd680141f..182bd680141f 100644
--- a/drivers/video/aty/mach64_accel.c
+++ b/drivers/video/fbdev/aty/mach64_accel.c
diff --git a/drivers/video/aty/mach64_ct.c b/drivers/video/fbdev/aty/mach64_ct.c
index 51f29d627ceb..51f29d627ceb 100644
--- a/drivers/video/aty/mach64_ct.c
+++ b/drivers/video/fbdev/aty/mach64_ct.c
diff --git a/drivers/video/aty/mach64_cursor.c b/drivers/video/fbdev/aty/mach64_cursor.c
index 0fe02e22d9a4..2fa0317ab3c7 100644
--- a/drivers/video/aty/mach64_cursor.c
+++ b/drivers/video/fbdev/aty/mach64_cursor.c
@@ -5,7 +5,7 @@
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/string.h>
-#include "../fb_draw.h"
+#include "../core/fb_draw.h"
 
 #include <asm/io.h>
 
diff --git a/drivers/video/aty/mach64_gx.c b/drivers/video/fbdev/aty/mach64_gx.c
index 10c988aef58e..10c988aef58e 100644
--- a/drivers/video/aty/mach64_gx.c
+++ b/drivers/video/fbdev/aty/mach64_gx.c
diff --git a/drivers/video/aty/radeon_accel.c b/drivers/video/fbdev/aty/radeon_accel.c
index a469a3d6edcb..a469a3d6edcb 100644
--- a/drivers/video/aty/radeon_accel.c
+++ b/drivers/video/fbdev/aty/radeon_accel.c
diff --git a/drivers/video/aty/radeon_backlight.c b/drivers/video/fbdev/aty/radeon_backlight.c
index db572df7e1ef..db572df7e1ef 100644
--- a/drivers/video/aty/radeon_backlight.c
+++ b/drivers/video/fbdev/aty/radeon_backlight.c
diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/fbdev/aty/radeon_base.c
index 26d80a4486fb..26d80a4486fb 100644
--- a/drivers/video/aty/radeon_base.c
+++ b/drivers/video/fbdev/aty/radeon_base.c
diff --git a/drivers/video/aty/radeon_i2c.c b/drivers/video/fbdev/aty/radeon_i2c.c
index ab1d0fd76316..ab1d0fd76316 100644
--- a/drivers/video/aty/radeon_i2c.c
+++ b/drivers/video/fbdev/aty/radeon_i2c.c
diff --git a/drivers/video/aty/radeon_monitor.c b/drivers/video/fbdev/aty/radeon_monitor.c
index bc078d50d8f1..bc078d50d8f1 100644
--- a/drivers/video/aty/radeon_monitor.c
+++ b/drivers/video/fbdev/aty/radeon_monitor.c
diff --git a/drivers/video/aty/radeon_pm.c b/drivers/video/fbdev/aty/radeon_pm.c
index 46a12f1a93c3..46a12f1a93c3 100644
--- a/drivers/video/aty/radeon_pm.c
+++ b/drivers/video/fbdev/aty/radeon_pm.c
diff --git a/drivers/video/aty/radeonfb.h b/drivers/video/fbdev/aty/radeonfb.h
index cb846044f57c..cb846044f57c 100644
--- a/drivers/video/aty/radeonfb.h
+++ b/drivers/video/fbdev/aty/radeonfb.h
diff --git a/drivers/video/au1100fb.c b/drivers/video/fbdev/au1100fb.c
index 372d4aea9d1c..372d4aea9d1c 100644
--- a/drivers/video/au1100fb.c
+++ b/drivers/video/fbdev/au1100fb.c
diff --git a/drivers/video/au1100fb.h b/drivers/video/fbdev/au1100fb.h
index 12d9642d5465..12d9642d5465 100644
--- a/drivers/video/au1100fb.h
+++ b/drivers/video/fbdev/au1100fb.h
diff --git a/drivers/video/au1200fb.c b/drivers/video/fbdev/au1200fb.c
index 4cfba78a1458..4cfba78a1458 100644
--- a/drivers/video/au1200fb.c
+++ b/drivers/video/fbdev/au1200fb.c
diff --git a/drivers/video/au1200fb.h b/drivers/video/fbdev/au1200fb.h
index e2672714d8d4..e2672714d8d4 100644
--- a/drivers/video/au1200fb.h
+++ b/drivers/video/fbdev/au1200fb.h
diff --git a/drivers/video/auo_k1900fb.c b/drivers/video/fbdev/auo_k1900fb.c
index f5b668e77af3..f5b668e77af3 100644
--- a/drivers/video/auo_k1900fb.c
+++ b/drivers/video/fbdev/auo_k1900fb.c
diff --git a/drivers/video/auo_k1901fb.c b/drivers/video/fbdev/auo_k1901fb.c
index 12b9adcb75c5..12b9adcb75c5 100644
--- a/drivers/video/auo_k1901fb.c
+++ b/drivers/video/fbdev/auo_k1901fb.c
diff --git a/drivers/video/auo_k190x.c b/drivers/video/fbdev/auo_k190x.c
index 8d2499d1cafb..8d2499d1cafb 100644
--- a/drivers/video/auo_k190x.c
+++ b/drivers/video/fbdev/auo_k190x.c
diff --git a/drivers/video/auo_k190x.h b/drivers/video/fbdev/auo_k190x.h
index e35af1f51b28..e35af1f51b28 100644
--- a/drivers/video/auo_k190x.h
+++ b/drivers/video/fbdev/auo_k190x.h
diff --git a/drivers/video/bf537-lq035.c b/drivers/video/fbdev/bf537-lq035.c
index a82d2578d976..a82d2578d976 100644
--- a/drivers/video/bf537-lq035.c
+++ b/drivers/video/fbdev/bf537-lq035.c
diff --git a/drivers/video/bf54x-lq043fb.c b/drivers/video/fbdev/bf54x-lq043fb.c
index 42b8f9d11018..e2c42ad8515a 100644
--- a/drivers/video/bf54x-lq043fb.c
+++ b/drivers/video/fbdev/bf54x-lq043fb.c
@@ -49,13 +49,13 @@
 #include <linux/spinlock.h>
 #include <linux/dma-mapping.h>
 #include <linux/platform_device.h>
+#include <linux/gpio.h>
 
 #include <asm/blackfin.h>
 #include <asm/irq.h>
 #include <asm/dpmc.h>
 #include <asm/dma-mapping.h>
 #include <asm/dma.h>
-#include <asm/gpio.h>
 #include <asm/portmux.h>
 
 #include <mach/bf54x-lq043.h>
diff --git a/drivers/video/bfin-lq035q1-fb.c b/drivers/video/fbdev/bfin-lq035q1-fb.c
index b594a58ff21d..b594a58ff21d 100644
--- a/drivers/video/bfin-lq035q1-fb.c
+++ b/drivers/video/fbdev/bfin-lq035q1-fb.c
diff --git a/drivers/video/bfin-t350mcqb-fb.c b/drivers/video/fbdev/bfin-t350mcqb-fb.c
index b5cf1307a3d9..b5cf1307a3d9 100644
--- a/drivers/video/bfin-t350mcqb-fb.c
+++ b/drivers/video/fbdev/bfin-t350mcqb-fb.c
diff --git a/drivers/video/bfin_adv7393fb.c b/drivers/video/fbdev/bfin_adv7393fb.c
index a54f7f7d763b..a54f7f7d763b 100644
--- a/drivers/video/bfin_adv7393fb.c
+++ b/drivers/video/fbdev/bfin_adv7393fb.c
diff --git a/drivers/video/bfin_adv7393fb.h b/drivers/video/fbdev/bfin_adv7393fb.h
index cd591b5152a5..cd591b5152a5 100644
--- a/drivers/video/bfin_adv7393fb.h
+++ b/drivers/video/fbdev/bfin_adv7393fb.h
diff --git a/drivers/video/broadsheetfb.c b/drivers/video/fbdev/broadsheetfb.c
index 8556264b16b7..8556264b16b7 100644
--- a/drivers/video/broadsheetfb.c
+++ b/drivers/video/fbdev/broadsheetfb.c
diff --git a/drivers/video/bt431.h b/drivers/video/fbdev/bt431.h
index 04e0cfbba538..04e0cfbba538 100644
--- a/drivers/video/bt431.h
+++ b/drivers/video/fbdev/bt431.h
diff --git a/drivers/video/bt455.h b/drivers/video/fbdev/bt455.h
index 80f61b03e9ae..80f61b03e9ae 100644
--- a/drivers/video/bt455.h
+++ b/drivers/video/fbdev/bt455.h
diff --git a/drivers/video/bw2.c b/drivers/video/fbdev/bw2.c
index bc123d6947a4..bc123d6947a4 100644
--- a/drivers/video/bw2.c
+++ b/drivers/video/fbdev/bw2.c
diff --git a/drivers/video/c2p.h b/drivers/video/fbdev/c2p.h
index 6c38d40427d8..6c38d40427d8 100644
--- a/drivers/video/c2p.h
+++ b/drivers/video/fbdev/c2p.h
diff --git a/drivers/video/c2p_core.h b/drivers/video/fbdev/c2p_core.h
index e1035a865fb9..e1035a865fb9 100644
--- a/drivers/video/c2p_core.h
+++ b/drivers/video/fbdev/c2p_core.h
diff --git a/drivers/video/c2p_iplan2.c b/drivers/video/fbdev/c2p_iplan2.c
index 19156dc6158c..19156dc6158c 100644
--- a/drivers/video/c2p_iplan2.c
+++ b/drivers/video/fbdev/c2p_iplan2.c
diff --git a/drivers/video/c2p_planar.c b/drivers/video/fbdev/c2p_planar.c
index ec7ac8526f06..ec7ac8526f06 100644
--- a/drivers/video/c2p_planar.c
+++ b/drivers/video/fbdev/c2p_planar.c
diff --git a/drivers/video/carminefb.c b/drivers/video/fbdev/carminefb.c
index 65f7c15f5fdb..65f7c15f5fdb 100644
--- a/drivers/video/carminefb.c
+++ b/drivers/video/fbdev/carminefb.c
diff --git a/drivers/video/carminefb.h b/drivers/video/fbdev/carminefb.h
index 05306de0c6b6..05306de0c6b6 100644
--- a/drivers/video/carminefb.h
+++ b/drivers/video/fbdev/carminefb.h
diff --git a/drivers/video/carminefb_regs.h b/drivers/video/fbdev/carminefb_regs.h
index 045215600b73..045215600b73 100644
--- a/drivers/video/carminefb_regs.h
+++ b/drivers/video/fbdev/carminefb_regs.h
diff --git a/drivers/video/cg14.c b/drivers/video/fbdev/cg14.c
index c79745b136bb..c79745b136bb 100644
--- a/drivers/video/cg14.c
+++ b/drivers/video/fbdev/cg14.c
diff --git a/drivers/video/cg3.c b/drivers/video/fbdev/cg3.c
index 64a89d5747ed..64a89d5747ed 100644
--- a/drivers/video/cg3.c
+++ b/drivers/video/fbdev/cg3.c
diff --git a/drivers/video/cg6.c b/drivers/video/fbdev/cg6.c
index 70781fea092a..70781fea092a 100644
--- a/drivers/video/cg6.c
+++ b/drivers/video/fbdev/cg6.c
diff --git a/drivers/video/chipsfb.c b/drivers/video/fbdev/chipsfb.c
index 206a66b61072..206a66b61072 100644
--- a/drivers/video/chipsfb.c
+++ b/drivers/video/fbdev/chipsfb.c
diff --git a/drivers/video/cirrusfb.c b/drivers/video/fbdev/cirrusfb.c
index d992aa5eb3f0..d992aa5eb3f0 100644
--- a/drivers/video/cirrusfb.c
+++ b/drivers/video/fbdev/cirrusfb.c
diff --git a/drivers/video/clps711xfb.c b/drivers/video/fbdev/clps711xfb.c
index f00980607b8f..f00980607b8f 100644
--- a/drivers/video/clps711xfb.c
+++ b/drivers/video/fbdev/clps711xfb.c
diff --git a/drivers/video/cobalt_lcdfb.c b/drivers/video/fbdev/cobalt_lcdfb.c
index d5533f4db1cf..d5533f4db1cf 100644
--- a/drivers/video/cobalt_lcdfb.c
+++ b/drivers/video/fbdev/cobalt_lcdfb.c
diff --git a/drivers/video/controlfb.c b/drivers/video/fbdev/controlfb.c
index fdadef979238..fdadef979238 100644
--- a/drivers/video/controlfb.c
+++ b/drivers/video/fbdev/controlfb.c
diff --git a/drivers/video/controlfb.h b/drivers/video/fbdev/controlfb.h
index 6026c60fc100..6026c60fc100 100644
--- a/drivers/video/controlfb.h
+++ b/drivers/video/fbdev/controlfb.h
diff --git a/drivers/video/fbdev/core/Makefile b/drivers/video/fbdev/core/Makefile
new file mode 100644
index 000000000000..fa306538dac2
--- /dev/null
+++ b/drivers/video/fbdev/core/Makefile
@@ -0,0 +1,16 @@
+obj-y                             += fb_notify.o
+obj-$(CONFIG_FB)                  += fb.o
+fb-y                              := fbmem.o fbmon.o fbcmap.o fbsysfs.o \
+                                     modedb.o fbcvt.o
+fb-objs                           := $(fb-y)
+
+obj-$(CONFIG_FB_CFB_FILLRECT)  += cfbfillrect.o
+obj-$(CONFIG_FB_CFB_COPYAREA)  += cfbcopyarea.o
+obj-$(CONFIG_FB_CFB_IMAGEBLIT) += cfbimgblt.o
+obj-$(CONFIG_FB_SYS_FILLRECT)  += sysfillrect.o
+obj-$(CONFIG_FB_SYS_COPYAREA)  += syscopyarea.o
+obj-$(CONFIG_FB_SYS_IMAGEBLIT) += sysimgblt.o
+obj-$(CONFIG_FB_SYS_FOPS)      += fb_sys_fops.o
+obj-$(CONFIG_FB_SVGALIB)       += svgalib.o
+obj-$(CONFIG_FB_DDC)           += fb_ddc.o
+obj-$(CONFIG_FB_DEFERRED_IO)   += fb_defio.o
diff --git a/drivers/video/cfbcopyarea.c b/drivers/video/fbdev/core/cfbcopyarea.c
index bcb57235fcc7..bcb57235fcc7 100644
--- a/drivers/video/cfbcopyarea.c
+++ b/drivers/video/fbdev/core/cfbcopyarea.c
diff --git a/drivers/video/cfbfillrect.c b/drivers/video/fbdev/core/cfbfillrect.c
index ba9f58b2a5e8..ba9f58b2a5e8 100644
--- a/drivers/video/cfbfillrect.c
+++ b/drivers/video/fbdev/core/cfbfillrect.c
diff --git a/drivers/video/cfbimgblt.c b/drivers/video/fbdev/core/cfbimgblt.c
index a2bb276a8b24..a2bb276a8b24 100644
--- a/drivers/video/cfbimgblt.c
+++ b/drivers/video/fbdev/core/cfbimgblt.c
diff --git a/drivers/video/fb_ddc.c b/drivers/video/fbdev/core/fb_ddc.c
index 2b106f046fde..94322ccfedde 100644
--- a/drivers/video/fb_ddc.c
+++ b/drivers/video/fbdev/core/fb_ddc.c
@@ -15,7 +15,7 @@
 #include <linux/i2c-algo-bit.h>
 #include <linux/slab.h>
 
-#include "edid.h"
+#include "../edid.h"
 
 #define DDC_ADDR	0x50
 
diff --git a/drivers/video/fb_defio.c b/drivers/video/fbdev/core/fb_defio.c
index 900aa4ecd617..900aa4ecd617 100644
--- a/drivers/video/fb_defio.c
+++ b/drivers/video/fbdev/core/fb_defio.c
diff --git a/drivers/video/fb_draw.h b/drivers/video/fbdev/core/fb_draw.h
index 624ee115f129..624ee115f129 100644
--- a/drivers/video/fb_draw.h
+++ b/drivers/video/fbdev/core/fb_draw.h
diff --git a/drivers/video/fb_notify.c b/drivers/video/fbdev/core/fb_notify.c
index 74c2da528884..74c2da528884 100644
--- a/drivers/video/fb_notify.c
+++ b/drivers/video/fbdev/core/fb_notify.c
diff --git a/drivers/video/fb_sys_fops.c b/drivers/video/fbdev/core/fb_sys_fops.c
index ff275d7f3eaf..ff275d7f3eaf 100644
--- a/drivers/video/fb_sys_fops.c
+++ b/drivers/video/fbdev/core/fb_sys_fops.c
diff --git a/drivers/video/fbcmap.c b/drivers/video/fbdev/core/fbcmap.c
index f89245b8ba8e..f89245b8ba8e 100644
--- a/drivers/video/fbcmap.c
+++ b/drivers/video/fbdev/core/fbcmap.c
diff --git a/drivers/video/fbcvt.c b/drivers/video/fbdev/core/fbcvt.c
index 7cb715dfc0e1..7cb715dfc0e1 100644
--- a/drivers/video/fbcvt.c
+++ b/drivers/video/fbdev/core/fbcvt.c
diff --git a/drivers/video/fbmem.c b/drivers/video/fbdev/core/fbmem.c
index b6d5008f361f..b6d5008f361f 100644
--- a/drivers/video/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
diff --git a/drivers/video/fbmon.c b/drivers/video/fbdev/core/fbmon.c
index 6103fa6fb54f..c204ebe6187e 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbdev/core/fbmon.c
@@ -37,7 +37,7 @@
 #include <asm/prom.h>
 #include <asm/pci-bridge.h>
 #endif
-#include "edid.h"
+#include "../edid.h"
 
 /*
  * EDID parser
diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbdev/core/fbsysfs.c
index 53444ac19fe0..53444ac19fe0 100644
--- a/drivers/video/fbsysfs.c
+++ b/drivers/video/fbdev/core/fbsysfs.c
diff --git a/drivers/video/modedb.c b/drivers/video/fbdev/core/modedb.c
index a9a907c440d7..a9a907c440d7 100644
--- a/drivers/video/modedb.c
+++ b/drivers/video/fbdev/core/modedb.c
diff --git a/drivers/video/svgalib.c b/drivers/video/fbdev/core/svgalib.c
index 9e01322fabe3..9e01322fabe3 100644
--- a/drivers/video/svgalib.c
+++ b/drivers/video/fbdev/core/svgalib.c
diff --git a/drivers/video/syscopyarea.c b/drivers/video/fbdev/core/syscopyarea.c
index 844a32fd38ed..844a32fd38ed 100644
--- a/drivers/video/syscopyarea.c
+++ b/drivers/video/fbdev/core/syscopyarea.c
diff --git a/drivers/video/sysfillrect.c b/drivers/video/fbdev/core/sysfillrect.c
index 33ee3d34f9d2..33ee3d34f9d2 100644
--- a/drivers/video/sysfillrect.c
+++ b/drivers/video/fbdev/core/sysfillrect.c
diff --git a/drivers/video/sysimgblt.c b/drivers/video/fbdev/core/sysimgblt.c
index a4d05b1b17d7..a4d05b1b17d7 100644
--- a/drivers/video/sysimgblt.c
+++ b/drivers/video/fbdev/core/sysimgblt.c
diff --git a/drivers/video/cyber2000fb.c b/drivers/video/fbdev/cyber2000fb.c
index b0a950f36970..b0a950f36970 100644
--- a/drivers/video/cyber2000fb.c
+++ b/drivers/video/fbdev/cyber2000fb.c
diff --git a/drivers/video/cyber2000fb.h b/drivers/video/fbdev/cyber2000fb.h
index bad69102e774..bad69102e774 100644
--- a/drivers/video/cyber2000fb.h
+++ b/drivers/video/fbdev/cyber2000fb.h
diff --git a/drivers/video/da8xx-fb.c b/drivers/video/fbdev/da8xx-fb.c
index 0c0ba920ea48..6b23508ff0a5 100644
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/fbdev/da8xx-fb.c
@@ -663,15 +663,7 @@ static int fb_setcolreg(unsigned regno, unsigned red, unsigned green,
 			(green << info->var.green.offset) |
 			(blue << info->var.blue.offset);
 
-		switch (info->var.bits_per_pixel) {
-		case 16:
-			((u16 *) (info->pseudo_palette))[regno] = v;
-			break;
-		case 24:
-		case 32:
-			((u32 *) (info->pseudo_palette))[regno] = v;
-			break;
-		}
+		((u32 *) (info->pseudo_palette))[regno] = v;
 		if (palette[0] != 0x4000) {
 			update_hw = 1;
 			palette[0] = 0x4000;
diff --git a/drivers/video/dnfb.c b/drivers/video/fbdev/dnfb.c
index 3526899da61b..3526899da61b 100644
--- a/drivers/video/dnfb.c
+++ b/drivers/video/fbdev/dnfb.c
diff --git a/drivers/video/edid.h b/drivers/video/fbdev/edid.h
index d03a232d90b2..d03a232d90b2 100644
--- a/drivers/video/edid.h
+++ b/drivers/video/fbdev/edid.h
diff --git a/drivers/video/efifb.c b/drivers/video/fbdev/efifb.c
index ae9618ff6735..ae9618ff6735 100644
--- a/drivers/video/efifb.c
+++ b/drivers/video/fbdev/efifb.c
diff --git a/drivers/video/ep93xx-fb.c b/drivers/video/fbdev/ep93xx-fb.c
index 35a0f533f1a2..35a0f533f1a2 100644
--- a/drivers/video/ep93xx-fb.c
+++ b/drivers/video/fbdev/ep93xx-fb.c
diff --git a/drivers/video/exynos/Kconfig b/drivers/video/fbdev/exynos/Kconfig
index fcf2d48ac6d1..fcf2d48ac6d1 100644
--- a/drivers/video/exynos/Kconfig
+++ b/drivers/video/fbdev/exynos/Kconfig
diff --git a/drivers/video/exynos/Makefile b/drivers/video/fbdev/exynos/Makefile
index b5b1bd228abb..b5b1bd228abb 100644
--- a/drivers/video/exynos/Makefile
+++ b/drivers/video/fbdev/exynos/Makefile
diff --git a/drivers/video/exynos/exynos_mipi_dsi.c b/drivers/video/fbdev/exynos/exynos_mipi_dsi.c
index cee9602f9a7b..cee9602f9a7b 100644
--- a/drivers/video/exynos/exynos_mipi_dsi.c
+++ b/drivers/video/fbdev/exynos/exynos_mipi_dsi.c
diff --git a/drivers/video/exynos/exynos_mipi_dsi_common.c b/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.c
index 85edabfdef5a..85edabfdef5a 100644
--- a/drivers/video/exynos/exynos_mipi_dsi_common.c
+++ b/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.c
diff --git a/drivers/video/exynos/exynos_mipi_dsi_common.h b/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.h
index 412552274df3..412552274df3 100644
--- a/drivers/video/exynos/exynos_mipi_dsi_common.h
+++ b/drivers/video/fbdev/exynos/exynos_mipi_dsi_common.h
diff --git a/drivers/video/exynos/exynos_mipi_dsi_lowlevel.c b/drivers/video/fbdev/exynos/exynos_mipi_dsi_lowlevel.c
index c148d06540c1..c148d06540c1 100644
--- a/drivers/video/exynos/exynos_mipi_dsi_lowlevel.c
+++ b/drivers/video/fbdev/exynos/exynos_mipi_dsi_lowlevel.c
diff --git a/drivers/video/exynos/exynos_mipi_dsi_lowlevel.h b/drivers/video/fbdev/exynos/exynos_mipi_dsi_lowlevel.h
index 85460701c7ea..85460701c7ea 100644
--- a/drivers/video/exynos/exynos_mipi_dsi_lowlevel.h
+++ b/drivers/video/fbdev/exynos/exynos_mipi_dsi_lowlevel.h
diff --git a/drivers/video/exynos/exynos_mipi_dsi_regs.h b/drivers/video/fbdev/exynos/exynos_mipi_dsi_regs.h
index 4227106d3fd0..4227106d3fd0 100644
--- a/drivers/video/exynos/exynos_mipi_dsi_regs.h
+++ b/drivers/video/fbdev/exynos/exynos_mipi_dsi_regs.h
diff --git a/drivers/video/exynos/s6e8ax0.c b/drivers/video/fbdev/exynos/s6e8ax0.c
index 29e70ed3f154..29e70ed3f154 100644
--- a/drivers/video/exynos/s6e8ax0.c
+++ b/drivers/video/fbdev/exynos/s6e8ax0.c
diff --git a/drivers/video/fb-puv3.c b/drivers/video/fbdev/fb-puv3.c
index 6db9ebd042a3..6db9ebd042a3 100644
--- a/drivers/video/fb-puv3.c
+++ b/drivers/video/fbdev/fb-puv3.c
diff --git a/drivers/video/ffb.c b/drivers/video/fbdev/ffb.c
index 4c4ffa61ae26..4c4ffa61ae26 100644
--- a/drivers/video/ffb.c
+++ b/drivers/video/fbdev/ffb.c
diff --git a/drivers/video/fm2fb.c b/drivers/video/fbdev/fm2fb.c
index e69d47af9932..e69d47af9932 100644
--- a/drivers/video/fm2fb.c
+++ b/drivers/video/fbdev/fm2fb.c
diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fbdev/fsl-diu-fb.c
index e8758b9c3bcc..e8758b9c3bcc 100644
--- a/drivers/video/fsl-diu-fb.c
+++ b/drivers/video/fbdev/fsl-diu-fb.c
diff --git a/drivers/video/g364fb.c b/drivers/video/fbdev/g364fb.c
index 223896cc5f7d..223896cc5f7d 100644
--- a/drivers/video/g364fb.c
+++ b/drivers/video/fbdev/g364fb.c
diff --git a/drivers/video/gbefb.c b/drivers/video/fbdev/gbefb.c
index 3ec65a878ac8..3ec65a878ac8 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/fbdev/gbefb.c
diff --git a/drivers/video/geode/Kconfig b/drivers/video/fbdev/geode/Kconfig
index 1e8555284786..1e8555284786 100644
--- a/drivers/video/geode/Kconfig
+++ b/drivers/video/fbdev/geode/Kconfig
diff --git a/drivers/video/geode/Makefile b/drivers/video/fbdev/geode/Makefile
index 5c98da126883..5c98da126883 100644
--- a/drivers/video/geode/Makefile
+++ b/drivers/video/fbdev/geode/Makefile
diff --git a/drivers/video/geode/display_gx.c b/drivers/video/fbdev/geode/display_gx.c
index f0af911a096d..f0af911a096d 100644
--- a/drivers/video/geode/display_gx.c
+++ b/drivers/video/fbdev/geode/display_gx.c
diff --git a/drivers/video/geode/display_gx1.c b/drivers/video/fbdev/geode/display_gx1.c
index 926d53eeb549..926d53eeb549 100644
--- a/drivers/video/geode/display_gx1.c
+++ b/drivers/video/fbdev/geode/display_gx1.c
diff --git a/drivers/video/geode/display_gx1.h b/drivers/video/fbdev/geode/display_gx1.h
index 671c05558c79..671c05558c79 100644
--- a/drivers/video/geode/display_gx1.h
+++ b/drivers/video/fbdev/geode/display_gx1.h
diff --git a/drivers/video/geode/geodefb.h b/drivers/video/fbdev/geode/geodefb.h
index ae04820e0c57..ae04820e0c57 100644
--- a/drivers/video/geode/geodefb.h
+++ b/drivers/video/fbdev/geode/geodefb.h
diff --git a/drivers/video/geode/gx1fb_core.c b/drivers/video/fbdev/geode/gx1fb_core.c
index 2794ba11f332..2794ba11f332 100644
--- a/drivers/video/geode/gx1fb_core.c
+++ b/drivers/video/fbdev/geode/gx1fb_core.c
diff --git a/drivers/video/geode/gxfb.h b/drivers/video/fbdev/geode/gxfb.h
index d19e9378b0c0..d19e9378b0c0 100644
--- a/drivers/video/geode/gxfb.h
+++ b/drivers/video/fbdev/geode/gxfb.h
diff --git a/drivers/video/geode/gxfb_core.c b/drivers/video/fbdev/geode/gxfb_core.c
index 1790f14bab15..1790f14bab15 100644
--- a/drivers/video/geode/gxfb_core.c
+++ b/drivers/video/fbdev/geode/gxfb_core.c
diff --git a/drivers/video/geode/lxfb.h b/drivers/video/fbdev/geode/lxfb.h
index cfcd8090f313..cfcd8090f313 100644
--- a/drivers/video/geode/lxfb.h
+++ b/drivers/video/fbdev/geode/lxfb.h
diff --git a/drivers/video/geode/lxfb_core.c b/drivers/video/fbdev/geode/lxfb_core.c
index 9e1d19d673a1..9e1d19d673a1 100644
--- a/drivers/video/geode/lxfb_core.c
+++ b/drivers/video/fbdev/geode/lxfb_core.c
diff --git a/drivers/video/geode/lxfb_ops.c b/drivers/video/fbdev/geode/lxfb_ops.c
index 79e9abc72b83..79e9abc72b83 100644
--- a/drivers/video/geode/lxfb_ops.c
+++ b/drivers/video/fbdev/geode/lxfb_ops.c
diff --git a/drivers/video/geode/suspend_gx.c b/drivers/video/fbdev/geode/suspend_gx.c
index 1bb043d70c64..1bb043d70c64 100644
--- a/drivers/video/geode/suspend_gx.c
+++ b/drivers/video/fbdev/geode/suspend_gx.c
diff --git a/drivers/video/geode/video_cs5530.c b/drivers/video/fbdev/geode/video_cs5530.c
index 649c3943d431..649c3943d431 100644
--- a/drivers/video/geode/video_cs5530.c
+++ b/drivers/video/fbdev/geode/video_cs5530.c
diff --git a/drivers/video/geode/video_cs5530.h b/drivers/video/fbdev/geode/video_cs5530.h
index 56cecca7f1ce..56cecca7f1ce 100644
--- a/drivers/video/geode/video_cs5530.h
+++ b/drivers/video/fbdev/geode/video_cs5530.h
diff --git a/drivers/video/geode/video_gx.c b/drivers/video/fbdev/geode/video_gx.c
index 6082f653c68a..6082f653c68a 100644
--- a/drivers/video/geode/video_gx.c
+++ b/drivers/video/fbdev/geode/video_gx.c
diff --git a/drivers/video/goldfishfb.c b/drivers/video/fbdev/goldfishfb.c
index 7f6c9e6cfc6c..7f6c9e6cfc6c 100644
--- a/drivers/video/goldfishfb.c
+++ b/drivers/video/fbdev/goldfishfb.c
diff --git a/drivers/video/grvga.c b/drivers/video/fbdev/grvga.c
index c078701f15f6..c078701f15f6 100644
--- a/drivers/video/grvga.c
+++ b/drivers/video/fbdev/grvga.c
diff --git a/drivers/video/gxt4500.c b/drivers/video/fbdev/gxt4500.c
index 135d78a02588..135d78a02588 100644
--- a/drivers/video/gxt4500.c
+++ b/drivers/video/fbdev/gxt4500.c
diff --git a/drivers/video/hecubafb.c b/drivers/video/fbdev/hecubafb.c
index f64120ec9192..f64120ec9192 100644
--- a/drivers/video/hecubafb.c
+++ b/drivers/video/fbdev/hecubafb.c
diff --git a/drivers/video/hgafb.c b/drivers/video/fbdev/hgafb.c
index 5ff9fe2116a4..5ff9fe2116a4 100644
--- a/drivers/video/hgafb.c
+++ b/drivers/video/fbdev/hgafb.c
diff --git a/drivers/video/hitfb.c b/drivers/video/fbdev/hitfb.c
index a648d5186c6e..a648d5186c6e 100644
--- a/drivers/video/hitfb.c
+++ b/drivers/video/fbdev/hitfb.c
diff --git a/drivers/video/hpfb.c b/drivers/video/fbdev/hpfb.c
index a1b7e5fa9b09..a1b7e5fa9b09 100644
--- a/drivers/video/hpfb.c
+++ b/drivers/video/fbdev/hpfb.c
diff --git a/drivers/video/hyperv_fb.c b/drivers/video/fbdev/hyperv_fb.c
index e23392ec5af3..e23392ec5af3 100644
--- a/drivers/video/hyperv_fb.c
+++ b/drivers/video/fbdev/hyperv_fb.c
diff --git a/drivers/video/i740_reg.h b/drivers/video/fbdev/i740_reg.h
index 91bac76549d7..91bac76549d7 100644
--- a/drivers/video/i740_reg.h
+++ b/drivers/video/fbdev/i740_reg.h
diff --git a/drivers/video/i740fb.c b/drivers/video/fbdev/i740fb.c
index ca7c9df193b0..ca7c9df193b0 100644
--- a/drivers/video/i740fb.c
+++ b/drivers/video/fbdev/i740fb.c
diff --git a/drivers/video/i810/Makefile b/drivers/video/fbdev/i810/Makefile
index 96e08c8ded97..96e08c8ded97 100644
--- a/drivers/video/i810/Makefile
+++ b/drivers/video/fbdev/i810/Makefile
diff --git a/drivers/video/i810/i810-i2c.c b/drivers/video/fbdev/i810/i810-i2c.c
index 7db17d0d8a8c..7db17d0d8a8c 100644
--- a/drivers/video/i810/i810-i2c.c
+++ b/drivers/video/fbdev/i810/i810-i2c.c
diff --git a/drivers/video/i810/i810.h b/drivers/video/fbdev/i810/i810.h
index 1414b73ac55b..1414b73ac55b 100644
--- a/drivers/video/i810/i810.h
+++ b/drivers/video/fbdev/i810/i810.h
diff --git a/drivers/video/i810/i810_accel.c b/drivers/video/fbdev/i810/i810_accel.c
index 7672d2ea9b35..7672d2ea9b35 100644
--- a/drivers/video/i810/i810_accel.c
+++ b/drivers/video/fbdev/i810/i810_accel.c
diff --git a/drivers/video/i810/i810_dvt.c b/drivers/video/fbdev/i810/i810_dvt.c
index b4b3670667ab..b4b3670667ab 100644
--- a/drivers/video/i810/i810_dvt.c
+++ b/drivers/video/fbdev/i810/i810_dvt.c
diff --git a/drivers/video/i810/i810_gtf.c b/drivers/video/fbdev/i810/i810_gtf.c
index 9743d51e7f8c..9743d51e7f8c 100644
--- a/drivers/video/i810/i810_gtf.c
+++ b/drivers/video/fbdev/i810/i810_gtf.c
diff --git a/drivers/video/i810/i810_main.c b/drivers/video/fbdev/i810/i810_main.c
index bb674e431741..bb674e431741 100644
--- a/drivers/video/i810/i810_main.c
+++ b/drivers/video/fbdev/i810/i810_main.c
diff --git a/drivers/video/i810/i810_main.h b/drivers/video/fbdev/i810/i810_main.h
index a25afaa534ba..a25afaa534ba 100644
--- a/drivers/video/i810/i810_main.h
+++ b/drivers/video/fbdev/i810/i810_main.h
diff --git a/drivers/video/i810/i810_regs.h b/drivers/video/fbdev/i810/i810_regs.h
index 91c6bd9d0d0d..91c6bd9d0d0d 100644
--- a/drivers/video/i810/i810_regs.h
+++ b/drivers/video/fbdev/i810/i810_regs.h
diff --git a/drivers/video/igafb.c b/drivers/video/fbdev/igafb.c
index 486f18897414..486f18897414 100644
--- a/drivers/video/igafb.c
+++ b/drivers/video/fbdev/igafb.c
diff --git a/drivers/video/imsttfb.c b/drivers/video/fbdev/imsttfb.c
index aae10ce74f14..aae10ce74f14 100644
--- a/drivers/video/imsttfb.c
+++ b/drivers/video/fbdev/imsttfb.c
diff --git a/drivers/video/imxfb.c b/drivers/video/fbdev/imxfb.c
index f6e621684953..f6e621684953 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/fbdev/imxfb.c
diff --git a/drivers/video/intelfb/Makefile b/drivers/video/fbdev/intelfb/Makefile
index f7d631ebee8e..f7d631ebee8e 100644
--- a/drivers/video/intelfb/Makefile
+++ b/drivers/video/fbdev/intelfb/Makefile
diff --git a/drivers/video/intelfb/intelfb.h b/drivers/video/fbdev/intelfb/intelfb.h
index 6b51175629c7..6b51175629c7 100644
--- a/drivers/video/intelfb/intelfb.h
+++ b/drivers/video/fbdev/intelfb/intelfb.h
diff --git a/drivers/video/intelfb/intelfb_i2c.c b/drivers/video/fbdev/intelfb/intelfb_i2c.c
index 3300bd31d9d7..3300bd31d9d7 100644
--- a/drivers/video/intelfb/intelfb_i2c.c
+++ b/drivers/video/fbdev/intelfb/intelfb_i2c.c
diff --git a/drivers/video/intelfb/intelfbdrv.c b/drivers/video/fbdev/intelfb/intelfbdrv.c
index b847d530471a..b847d530471a 100644
--- a/drivers/video/intelfb/intelfbdrv.c
+++ b/drivers/video/fbdev/intelfb/intelfbdrv.c
diff --git a/drivers/video/intelfb/intelfbhw.c b/drivers/video/fbdev/intelfb/intelfbhw.c
index fbad61da359f..fbad61da359f 100644
--- a/drivers/video/intelfb/intelfbhw.c
+++ b/drivers/video/fbdev/intelfb/intelfbhw.c
diff --git a/drivers/video/intelfb/intelfbhw.h b/drivers/video/fbdev/intelfb/intelfbhw.h
index 216ca20f259f..216ca20f259f 100644
--- a/drivers/video/intelfb/intelfbhw.h
+++ b/drivers/video/fbdev/intelfb/intelfbhw.h
diff --git a/drivers/video/jz4740_fb.c b/drivers/video/fbdev/jz4740_fb.c
index 87790e9644d0..87790e9644d0 100644
--- a/drivers/video/jz4740_fb.c
+++ b/drivers/video/fbdev/jz4740_fb.c
diff --git a/drivers/video/kyro/Makefile b/drivers/video/fbdev/kyro/Makefile
index 2fd66f551bae..2fd66f551bae 100644
--- a/drivers/video/kyro/Makefile
+++ b/drivers/video/fbdev/kyro/Makefile
diff --git a/drivers/video/kyro/STG4000InitDevice.c b/drivers/video/fbdev/kyro/STG4000InitDevice.c
index 1d3f2080aa6f..1d3f2080aa6f 100644
--- a/drivers/video/kyro/STG4000InitDevice.c
+++ b/drivers/video/fbdev/kyro/STG4000InitDevice.c
diff --git a/drivers/video/kyro/STG4000Interface.h b/drivers/video/fbdev/kyro/STG4000Interface.h
index b7c83d5dfb13..b7c83d5dfb13 100644
--- a/drivers/video/kyro/STG4000Interface.h
+++ b/drivers/video/fbdev/kyro/STG4000Interface.h
diff --git a/drivers/video/kyro/STG4000OverlayDevice.c b/drivers/video/fbdev/kyro/STG4000OverlayDevice.c
index 0aeeaa10708b..0aeeaa10708b 100644
--- a/drivers/video/kyro/STG4000OverlayDevice.c
+++ b/drivers/video/fbdev/kyro/STG4000OverlayDevice.c
diff --git a/drivers/video/kyro/STG4000Ramdac.c b/drivers/video/fbdev/kyro/STG4000Ramdac.c
index e6ad037e4396..e6ad037e4396 100644
--- a/drivers/video/kyro/STG4000Ramdac.c
+++ b/drivers/video/fbdev/kyro/STG4000Ramdac.c
diff --git a/drivers/video/kyro/STG4000Reg.h b/drivers/video/fbdev/kyro/STG4000Reg.h
index 50f4670e9252..50f4670e9252 100644
--- a/drivers/video/kyro/STG4000Reg.h
+++ b/drivers/video/fbdev/kyro/STG4000Reg.h
diff --git a/drivers/video/kyro/STG4000VTG.c b/drivers/video/fbdev/kyro/STG4000VTG.c
index bd389709d234..bd389709d234 100644
--- a/drivers/video/kyro/STG4000VTG.c
+++ b/drivers/video/fbdev/kyro/STG4000VTG.c
diff --git a/drivers/video/kyro/fbdev.c b/drivers/video/fbdev/kyro/fbdev.c
index 65041e15fd59..65041e15fd59 100644
--- a/drivers/video/kyro/fbdev.c
+++ b/drivers/video/fbdev/kyro/fbdev.c
diff --git a/drivers/video/leo.c b/drivers/video/fbdev/leo.c
index 2c7f7d479fe2..2c7f7d479fe2 100644
--- a/drivers/video/leo.c
+++ b/drivers/video/fbdev/leo.c
diff --git a/drivers/video/macfb.c b/drivers/video/fbdev/macfb.c
index cda7587cbc86..cda7587cbc86 100644
--- a/drivers/video/macfb.c
+++ b/drivers/video/fbdev/macfb.c
diff --git a/drivers/video/macmodes.c b/drivers/video/fbdev/macmodes.c
index af86c081d2be..af86c081d2be 100644
--- a/drivers/video/macmodes.c
+++ b/drivers/video/fbdev/macmodes.c
diff --git a/drivers/video/macmodes.h b/drivers/video/fbdev/macmodes.h
index b86ba08aac9e..b86ba08aac9e 100644
--- a/drivers/video/macmodes.h
+++ b/drivers/video/fbdev/macmodes.h
diff --git a/drivers/video/matrox/Makefile b/drivers/video/fbdev/matrox/Makefile
index f9c00ebe2530..f9c00ebe2530 100644
--- a/drivers/video/matrox/Makefile
+++ b/drivers/video/fbdev/matrox/Makefile
diff --git a/drivers/video/matrox/g450_pll.c b/drivers/video/fbdev/matrox/g450_pll.c
index c15f8a57498e..c15f8a57498e 100644
--- a/drivers/video/matrox/g450_pll.c
+++ b/drivers/video/fbdev/matrox/g450_pll.c
diff --git a/drivers/video/matrox/g450_pll.h b/drivers/video/fbdev/matrox/g450_pll.h
index aac615d18440..aac615d18440 100644
--- a/drivers/video/matrox/g450_pll.h
+++ b/drivers/video/fbdev/matrox/g450_pll.h
diff --git a/drivers/video/matrox/i2c-matroxfb.c b/drivers/video/fbdev/matrox/i2c-matroxfb.c
index 0fb280ead3dc..0fb280ead3dc 100644
--- a/drivers/video/matrox/i2c-matroxfb.c
+++ b/drivers/video/fbdev/matrox/i2c-matroxfb.c
diff --git a/drivers/video/matrox/matroxfb_DAC1064.c b/drivers/video/fbdev/matrox/matroxfb_DAC1064.c
index a01147fdf270..a01147fdf270 100644
--- a/drivers/video/matrox/matroxfb_DAC1064.c
+++ b/drivers/video/fbdev/matrox/matroxfb_DAC1064.c
diff --git a/drivers/video/matrox/matroxfb_DAC1064.h b/drivers/video/fbdev/matrox/matroxfb_DAC1064.h
index 1e6e45b57b78..1e6e45b57b78 100644
--- a/drivers/video/matrox/matroxfb_DAC1064.h
+++ b/drivers/video/fbdev/matrox/matroxfb_DAC1064.h
diff --git a/drivers/video/matrox/matroxfb_Ti3026.c b/drivers/video/fbdev/matrox/matroxfb_Ti3026.c
index 195ad7cac1ba..195ad7cac1ba 100644
--- a/drivers/video/matrox/matroxfb_Ti3026.c
+++ b/drivers/video/fbdev/matrox/matroxfb_Ti3026.c
diff --git a/drivers/video/matrox/matroxfb_Ti3026.h b/drivers/video/fbdev/matrox/matroxfb_Ti3026.h
index 27872aaa0a17..27872aaa0a17 100644
--- a/drivers/video/matrox/matroxfb_Ti3026.h
+++ b/drivers/video/fbdev/matrox/matroxfb_Ti3026.h
diff --git a/drivers/video/matrox/matroxfb_accel.c b/drivers/video/fbdev/matrox/matroxfb_accel.c
index 0d5cb85d071a..0d5cb85d071a 100644
--- a/drivers/video/matrox/matroxfb_accel.c
+++ b/drivers/video/fbdev/matrox/matroxfb_accel.c
diff --git a/drivers/video/matrox/matroxfb_accel.h b/drivers/video/fbdev/matrox/matroxfb_accel.h
index 1e418e62c22d..1e418e62c22d 100644
--- a/drivers/video/matrox/matroxfb_accel.h
+++ b/drivers/video/fbdev/matrox/matroxfb_accel.h
diff --git a/drivers/video/matrox/matroxfb_base.c b/drivers/video/fbdev/matrox/matroxfb_base.c
index 7116c5309c7d..7116c5309c7d 100644
--- a/drivers/video/matrox/matroxfb_base.c
+++ b/drivers/video/fbdev/matrox/matroxfb_base.c
diff --git a/drivers/video/matrox/matroxfb_base.h b/drivers/video/fbdev/matrox/matroxfb_base.h
index 556d96ce40bf..556d96ce40bf 100644
--- a/drivers/video/matrox/matroxfb_base.h
+++ b/drivers/video/fbdev/matrox/matroxfb_base.h
diff --git a/drivers/video/matrox/matroxfb_crtc2.c b/drivers/video/fbdev/matrox/matroxfb_crtc2.c
index 02796a4317a9..02796a4317a9 100644
--- a/drivers/video/matrox/matroxfb_crtc2.c
+++ b/drivers/video/fbdev/matrox/matroxfb_crtc2.c
diff --git a/drivers/video/matrox/matroxfb_crtc2.h b/drivers/video/fbdev/matrox/matroxfb_crtc2.h
index 1005582e843e..1005582e843e 100644
--- a/drivers/video/matrox/matroxfb_crtc2.h
+++ b/drivers/video/fbdev/matrox/matroxfb_crtc2.h
diff --git a/drivers/video/matrox/matroxfb_g450.c b/drivers/video/fbdev/matrox/matroxfb_g450.c
index cff0546ea6fd..cff0546ea6fd 100644
--- a/drivers/video/matrox/matroxfb_g450.c
+++ b/drivers/video/fbdev/matrox/matroxfb_g450.c
diff --git a/drivers/video/matrox/matroxfb_g450.h b/drivers/video/fbdev/matrox/matroxfb_g450.h
index 3a3e654444b8..3a3e654444b8 100644
--- a/drivers/video/matrox/matroxfb_g450.h
+++ b/drivers/video/fbdev/matrox/matroxfb_g450.h
diff --git a/drivers/video/matrox/matroxfb_maven.c b/drivers/video/fbdev/matrox/matroxfb_maven.c
index ee41a0f276b2..ee41a0f276b2 100644
--- a/drivers/video/matrox/matroxfb_maven.c
+++ b/drivers/video/fbdev/matrox/matroxfb_maven.c
diff --git a/drivers/video/matrox/matroxfb_maven.h b/drivers/video/fbdev/matrox/matroxfb_maven.h
index 99eddec9f30c..99eddec9f30c 100644
--- a/drivers/video/matrox/matroxfb_maven.h
+++ b/drivers/video/fbdev/matrox/matroxfb_maven.h
diff --git a/drivers/video/matrox/matroxfb_misc.c b/drivers/video/fbdev/matrox/matroxfb_misc.c
index 9948ca2a3046..9948ca2a3046 100644
--- a/drivers/video/matrox/matroxfb_misc.c
+++ b/drivers/video/fbdev/matrox/matroxfb_misc.c
diff --git a/drivers/video/matrox/matroxfb_misc.h b/drivers/video/fbdev/matrox/matroxfb_misc.h
index 351c823f1f74..351c823f1f74 100644
--- a/drivers/video/matrox/matroxfb_misc.h
+++ b/drivers/video/fbdev/matrox/matroxfb_misc.h
diff --git a/drivers/video/maxinefb.c b/drivers/video/fbdev/maxinefb.c
index 5cf52d3c8e75..5cf52d3c8e75 100644
--- a/drivers/video/maxinefb.c
+++ b/drivers/video/fbdev/maxinefb.c
diff --git a/drivers/video/mb862xx/Makefile b/drivers/video/fbdev/mb862xx/Makefile
index 5707ed0e31a7..5707ed0e31a7 100644
--- a/drivers/video/mb862xx/Makefile
+++ b/drivers/video/fbdev/mb862xx/Makefile
diff --git a/drivers/video/mb862xx/mb862xx-i2c.c b/drivers/video/fbdev/mb862xx/mb862xx-i2c.c
index c87e17afb3e2..c87e17afb3e2 100644
--- a/drivers/video/mb862xx/mb862xx-i2c.c
+++ b/drivers/video/fbdev/mb862xx/mb862xx-i2c.c
diff --git a/drivers/video/mb862xx/mb862xx_reg.h b/drivers/video/fbdev/mb862xx/mb862xx_reg.h
index 9df48b8edc94..9df48b8edc94 100644
--- a/drivers/video/mb862xx/mb862xx_reg.h
+++ b/drivers/video/fbdev/mb862xx/mb862xx_reg.h
diff --git a/drivers/video/mb862xx/mb862xxfb.h b/drivers/video/fbdev/mb862xx/mb862xxfb.h
index 8550630c1e01..8550630c1e01 100644
--- a/drivers/video/mb862xx/mb862xxfb.h
+++ b/drivers/video/fbdev/mb862xx/mb862xxfb.h
diff --git a/drivers/video/mb862xx/mb862xxfb_accel.c b/drivers/video/fbdev/mb862xx/mb862xxfb_accel.c
index fe92eed6da70..fe92eed6da70 100644
--- a/drivers/video/mb862xx/mb862xxfb_accel.c
+++ b/drivers/video/fbdev/mb862xx/mb862xxfb_accel.c
diff --git a/drivers/video/mb862xx/mb862xxfb_accel.h b/drivers/video/fbdev/mb862xx/mb862xxfb_accel.h
index 96a2dfef0f60..96a2dfef0f60 100644
--- a/drivers/video/mb862xx/mb862xxfb_accel.h
+++ b/drivers/video/fbdev/mb862xx/mb862xxfb_accel.h
diff --git a/drivers/video/mb862xx/mb862xxfbdrv.c b/drivers/video/fbdev/mb862xx/mb862xxfbdrv.c
index 0cd4c3318511..0cd4c3318511 100644
--- a/drivers/video/mb862xx/mb862xxfbdrv.c
+++ b/drivers/video/fbdev/mb862xx/mb862xxfbdrv.c
diff --git a/drivers/video/mbx/Makefile b/drivers/video/fbdev/mbx/Makefile
index 16c1165cf9c7..16c1165cf9c7 100644
--- a/drivers/video/mbx/Makefile
+++ b/drivers/video/fbdev/mbx/Makefile
diff --git a/drivers/video/mbx/mbxdebugfs.c b/drivers/video/fbdev/mbx/mbxdebugfs.c
index 4449f249b0e7..4449f249b0e7 100644
--- a/drivers/video/mbx/mbxdebugfs.c
+++ b/drivers/video/fbdev/mbx/mbxdebugfs.c
diff --git a/drivers/video/mbx/mbxfb.c b/drivers/video/fbdev/mbx/mbxfb.c
index f0a5392f5fd3..f0a5392f5fd3 100644
--- a/drivers/video/mbx/mbxfb.c
+++ b/drivers/video/fbdev/mbx/mbxfb.c
diff --git a/drivers/video/mbx/reg_bits.h b/drivers/video/fbdev/mbx/reg_bits.h
index 5f14b4befd71..5f14b4befd71 100644
--- a/drivers/video/mbx/reg_bits.h
+++ b/drivers/video/fbdev/mbx/reg_bits.h
diff --git a/drivers/video/mbx/regs.h b/drivers/video/fbdev/mbx/regs.h
index 063099d48839..063099d48839 100644
--- a/drivers/video/mbx/regs.h
+++ b/drivers/video/fbdev/mbx/regs.h
diff --git a/drivers/video/metronomefb.c b/drivers/video/fbdev/metronomefb.c
index 195cc2db4c2c..195cc2db4c2c 100644
--- a/drivers/video/metronomefb.c
+++ b/drivers/video/fbdev/metronomefb.c
diff --git a/drivers/video/mmp/Kconfig b/drivers/video/fbdev/mmp/Kconfig
index e9ea39e13722..d4a4ffc24749 100644
--- a/drivers/video/mmp/Kconfig
+++ b/drivers/video/fbdev/mmp/Kconfig
@@ -5,7 +5,7 @@ menuconfig MMP_DISP
 	  Marvell Display Subsystem support.
 
 if MMP_DISP
-source "drivers/video/mmp/hw/Kconfig"
-source "drivers/video/mmp/panel/Kconfig"
-source "drivers/video/mmp/fb/Kconfig"
+source "drivers/video/fbdev/mmp/hw/Kconfig"
+source "drivers/video/fbdev/mmp/panel/Kconfig"
+source "drivers/video/fbdev/mmp/fb/Kconfig"
 endif
diff --git a/drivers/video/mmp/Makefile b/drivers/video/fbdev/mmp/Makefile
index a014cb358bf8..a014cb358bf8 100644
--- a/drivers/video/mmp/Makefile
+++ b/drivers/video/fbdev/mmp/Makefile
diff --git a/drivers/video/mmp/core.c b/drivers/video/fbdev/mmp/core.c
index b563b920f159..b563b920f159 100644
--- a/drivers/video/mmp/core.c
+++ b/drivers/video/fbdev/mmp/core.c
diff --git a/drivers/video/mmp/fb/Kconfig b/drivers/video/fbdev/mmp/fb/Kconfig
index 9b0141f105f5..9b0141f105f5 100644
--- a/drivers/video/mmp/fb/Kconfig
+++ b/drivers/video/fbdev/mmp/fb/Kconfig
diff --git a/drivers/video/mmp/fb/Makefile b/drivers/video/fbdev/mmp/fb/Makefile
index 709fd1f76abe..709fd1f76abe 100644
--- a/drivers/video/mmp/fb/Makefile
+++ b/drivers/video/fbdev/mmp/fb/Makefile
diff --git a/drivers/video/mmp/fb/mmpfb.c b/drivers/video/fbdev/mmp/fb/mmpfb.c
index 7ab31eb76a8c..7ab31eb76a8c 100644
--- a/drivers/video/mmp/fb/mmpfb.c
+++ b/drivers/video/fbdev/mmp/fb/mmpfb.c
diff --git a/drivers/video/mmp/fb/mmpfb.h b/drivers/video/fbdev/mmp/fb/mmpfb.h
index 88c23c10a9ec..88c23c10a9ec 100644
--- a/drivers/video/mmp/fb/mmpfb.h
+++ b/drivers/video/fbdev/mmp/fb/mmpfb.h
diff --git a/drivers/video/mmp/hw/Kconfig b/drivers/video/fbdev/mmp/hw/Kconfig
index 02f109a20cd0..02f109a20cd0 100644
--- a/drivers/video/mmp/hw/Kconfig
+++ b/drivers/video/fbdev/mmp/hw/Kconfig
diff --git a/drivers/video/mmp/hw/Makefile b/drivers/video/fbdev/mmp/hw/Makefile
index 0000a714fedf..0000a714fedf 100644
--- a/drivers/video/mmp/hw/Makefile
+++ b/drivers/video/fbdev/mmp/hw/Makefile
diff --git a/drivers/video/mmp/hw/mmp_ctrl.c b/drivers/video/fbdev/mmp/hw/mmp_ctrl.c
index 8621a9f2bdcc..8621a9f2bdcc 100644
--- a/drivers/video/mmp/hw/mmp_ctrl.c
+++ b/drivers/video/fbdev/mmp/hw/mmp_ctrl.c
diff --git a/drivers/video/mmp/hw/mmp_ctrl.h b/drivers/video/fbdev/mmp/hw/mmp_ctrl.h
index 53301cfdb1ae..53301cfdb1ae 100644
--- a/drivers/video/mmp/hw/mmp_ctrl.h
+++ b/drivers/video/fbdev/mmp/hw/mmp_ctrl.h
diff --git a/drivers/video/mmp/hw/mmp_spi.c b/drivers/video/fbdev/mmp/hw/mmp_spi.c
index e62ca7bf0d5e..e62ca7bf0d5e 100644
--- a/drivers/video/mmp/hw/mmp_spi.c
+++ b/drivers/video/fbdev/mmp/hw/mmp_spi.c
diff --git a/drivers/video/mmp/panel/Kconfig b/drivers/video/fbdev/mmp/panel/Kconfig
index 4b2c4f457b11..4b2c4f457b11 100644
--- a/drivers/video/mmp/panel/Kconfig
+++ b/drivers/video/fbdev/mmp/panel/Kconfig
diff --git a/drivers/video/mmp/panel/Makefile b/drivers/video/fbdev/mmp/panel/Makefile
index 2f91611c7e5e..2f91611c7e5e 100644
--- a/drivers/video/mmp/panel/Makefile
+++ b/drivers/video/fbdev/mmp/panel/Makefile
diff --git a/drivers/video/mmp/panel/tpo_tj032md01bw.c b/drivers/video/fbdev/mmp/panel/tpo_tj032md01bw.c
index 998978b08f5e..998978b08f5e 100644
--- a/drivers/video/mmp/panel/tpo_tj032md01bw.c
+++ b/drivers/video/fbdev/mmp/panel/tpo_tj032md01bw.c
diff --git a/drivers/video/msm/Makefile b/drivers/video/fbdev/msm/Makefile
index 802d6ae523fb..802d6ae523fb 100644
--- a/drivers/video/msm/Makefile
+++ b/drivers/video/fbdev/msm/Makefile
diff --git a/drivers/video/msm/mddi.c b/drivers/video/fbdev/msm/mddi.c
index e0f8011a3c4b..e0f8011a3c4b 100644
--- a/drivers/video/msm/mddi.c
+++ b/drivers/video/fbdev/msm/mddi.c
diff --git a/drivers/video/msm/mddi_client_dummy.c b/drivers/video/fbdev/msm/mddi_client_dummy.c
index f1b0dfcc9717..f1b0dfcc9717 100644
--- a/drivers/video/msm/mddi_client_dummy.c
+++ b/drivers/video/fbdev/msm/mddi_client_dummy.c
diff --git a/drivers/video/msm/mddi_client_nt35399.c b/drivers/video/fbdev/msm/mddi_client_nt35399.c
index f96df32e5509..f96df32e5509 100644
--- a/drivers/video/msm/mddi_client_nt35399.c
+++ b/drivers/video/fbdev/msm/mddi_client_nt35399.c
diff --git a/drivers/video/msm/mddi_client_toshiba.c b/drivers/video/fbdev/msm/mddi_client_toshiba.c
index 061d7dfebbf3..061d7dfebbf3 100644
--- a/drivers/video/msm/mddi_client_toshiba.c
+++ b/drivers/video/fbdev/msm/mddi_client_toshiba.c
diff --git a/drivers/video/msm/mddi_hw.h b/drivers/video/fbdev/msm/mddi_hw.h
index 45cc01fc1e7f..45cc01fc1e7f 100644
--- a/drivers/video/msm/mddi_hw.h
+++ b/drivers/video/fbdev/msm/mddi_hw.h
diff --git a/drivers/video/msm/mdp.c b/drivers/video/fbdev/msm/mdp.c
index 113c7876c855..113c7876c855 100644
--- a/drivers/video/msm/mdp.c
+++ b/drivers/video/fbdev/msm/mdp.c
diff --git a/drivers/video/msm/mdp_csc_table.h b/drivers/video/fbdev/msm/mdp_csc_table.h
index d1cde30ead52..d1cde30ead52 100644
--- a/drivers/video/msm/mdp_csc_table.h
+++ b/drivers/video/fbdev/msm/mdp_csc_table.h
diff --git a/drivers/video/msm/mdp_hw.h b/drivers/video/fbdev/msm/mdp_hw.h
index 35848d741001..35848d741001 100644
--- a/drivers/video/msm/mdp_hw.h
+++ b/drivers/video/fbdev/msm/mdp_hw.h
diff --git a/drivers/video/msm/mdp_ppp.c b/drivers/video/fbdev/msm/mdp_ppp.c
index be6079cdfbb6..be6079cdfbb6 100644
--- a/drivers/video/msm/mdp_ppp.c
+++ b/drivers/video/fbdev/msm/mdp_ppp.c
diff --git a/drivers/video/msm/mdp_scale_tables.c b/drivers/video/fbdev/msm/mdp_scale_tables.c
index 604783b2e17c..604783b2e17c 100644
--- a/drivers/video/msm/mdp_scale_tables.c
+++ b/drivers/video/fbdev/msm/mdp_scale_tables.c
diff --git a/drivers/video/msm/mdp_scale_tables.h b/drivers/video/fbdev/msm/mdp_scale_tables.h
index 34077b1af603..34077b1af603 100644
--- a/drivers/video/msm/mdp_scale_tables.h
+++ b/drivers/video/fbdev/msm/mdp_scale_tables.h
diff --git a/drivers/video/msm/msm_fb.c b/drivers/video/fbdev/msm/msm_fb.c
index 1374803fbcd9..1374803fbcd9 100644
--- a/drivers/video/msm/msm_fb.c
+++ b/drivers/video/fbdev/msm/msm_fb.c
diff --git a/drivers/video/mx3fb.c b/drivers/video/fbdev/mx3fb.c
index 142e860fb527..142e860fb527 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/fbdev/mx3fb.c
diff --git a/drivers/video/mxsfb.c b/drivers/video/fbdev/mxsfb.c
index accf48a2cce4..accf48a2cce4 100644
--- a/drivers/video/mxsfb.c
+++ b/drivers/video/fbdev/mxsfb.c
diff --git a/drivers/video/n411.c b/drivers/video/fbdev/n411.c
index 935830fea7b6..935830fea7b6 100644
--- a/drivers/video/n411.c
+++ b/drivers/video/fbdev/n411.c
diff --git a/drivers/video/neofb.c b/drivers/video/fbdev/neofb.c
index 44f99a60bb9b..44f99a60bb9b 100644
--- a/drivers/video/neofb.c
+++ b/drivers/video/fbdev/neofb.c
diff --git a/drivers/video/nuc900fb.c b/drivers/video/fbdev/nuc900fb.c
index 478f9808dee4..478f9808dee4 100644
--- a/drivers/video/nuc900fb.c
+++ b/drivers/video/fbdev/nuc900fb.c
diff --git a/drivers/video/nuc900fb.h b/drivers/video/fbdev/nuc900fb.h
index 9a1ca6dbb6b2..9a1ca6dbb6b2 100644
--- a/drivers/video/nuc900fb.h
+++ b/drivers/video/fbdev/nuc900fb.h
diff --git a/drivers/video/nvidia/Makefile b/drivers/video/fbdev/nvidia/Makefile
index ca47432113e0..ca47432113e0 100644
--- a/drivers/video/nvidia/Makefile
+++ b/drivers/video/fbdev/nvidia/Makefile
diff --git a/drivers/video/nvidia/nv_accel.c b/drivers/video/fbdev/nvidia/nv_accel.c
index ad6472a894ea..ad6472a894ea 100644
--- a/drivers/video/nvidia/nv_accel.c
+++ b/drivers/video/fbdev/nvidia/nv_accel.c
diff --git a/drivers/video/nvidia/nv_backlight.c b/drivers/video/fbdev/nvidia/nv_backlight.c
index 8471008aa6ff..8471008aa6ff 100644
--- a/drivers/video/nvidia/nv_backlight.c
+++ b/drivers/video/fbdev/nvidia/nv_backlight.c
diff --git a/drivers/video/nvidia/nv_dma.h b/drivers/video/fbdev/nvidia/nv_dma.h
index a7ed1c0acbbb..a7ed1c0acbbb 100644
--- a/drivers/video/nvidia/nv_dma.h
+++ b/drivers/video/fbdev/nvidia/nv_dma.h
diff --git a/drivers/video/nvidia/nv_hw.c b/drivers/video/fbdev/nvidia/nv_hw.c
index 81c80ac3c76f..81c80ac3c76f 100644
--- a/drivers/video/nvidia/nv_hw.c
+++ b/drivers/video/fbdev/nvidia/nv_hw.c
diff --git a/drivers/video/nvidia/nv_i2c.c b/drivers/video/fbdev/nvidia/nv_i2c.c
index d7994a173245..d7994a173245 100644
--- a/drivers/video/nvidia/nv_i2c.c
+++ b/drivers/video/fbdev/nvidia/nv_i2c.c
diff --git a/drivers/video/nvidia/nv_local.h b/drivers/video/fbdev/nvidia/nv_local.h
index 68e508daa417..68e508daa417 100644
--- a/drivers/video/nvidia/nv_local.h
+++ b/drivers/video/fbdev/nvidia/nv_local.h
diff --git a/drivers/video/nvidia/nv_of.c b/drivers/video/fbdev/nvidia/nv_of.c
index 3bc13df4b120..3bc13df4b120 100644
--- a/drivers/video/nvidia/nv_of.c
+++ b/drivers/video/fbdev/nvidia/nv_of.c
diff --git a/drivers/video/nvidia/nv_proto.h b/drivers/video/fbdev/nvidia/nv_proto.h
index ff5c410355ea..ff5c410355ea 100644
--- a/drivers/video/nvidia/nv_proto.h
+++ b/drivers/video/fbdev/nvidia/nv_proto.h
diff --git a/drivers/video/nvidia/nv_setup.c b/drivers/video/fbdev/nvidia/nv_setup.c
index 2f2e162134fa..2f2e162134fa 100644
--- a/drivers/video/nvidia/nv_setup.c
+++ b/drivers/video/fbdev/nvidia/nv_setup.c
diff --git a/drivers/video/nvidia/nv_type.h b/drivers/video/fbdev/nvidia/nv_type.h
index c03f7f55c76d..c03f7f55c76d 100644
--- a/drivers/video/nvidia/nv_type.h
+++ b/drivers/video/fbdev/nvidia/nv_type.h
diff --git a/drivers/video/nvidia/nvidia.c b/drivers/video/fbdev/nvidia/nvidia.c
index def041204676..def041204676 100644
--- a/drivers/video/nvidia/nvidia.c
+++ b/drivers/video/fbdev/nvidia/nvidia.c
diff --git a/drivers/video/ocfb.c b/drivers/video/fbdev/ocfb.c
index 7f9dc9bec309..7f9dc9bec309 100644
--- a/drivers/video/ocfb.c
+++ b/drivers/video/fbdev/ocfb.c
diff --git a/drivers/video/offb.c b/drivers/video/fbdev/offb.c
index 7d44d669d5b6..7d44d669d5b6 100644
--- a/drivers/video/offb.c
+++ b/drivers/video/fbdev/offb.c
diff --git a/drivers/video/omap/Kconfig b/drivers/video/fbdev/omap/Kconfig
index 0bc3a936ce2b..0bc3a936ce2b 100644
--- a/drivers/video/omap/Kconfig
+++ b/drivers/video/fbdev/omap/Kconfig
diff --git a/drivers/video/omap/Makefile b/drivers/video/fbdev/omap/Makefile
index 1927faffb5bc..1927faffb5bc 100644
--- a/drivers/video/omap/Makefile
+++ b/drivers/video/fbdev/omap/Makefile
diff --git a/drivers/video/omap/hwa742.c b/drivers/video/fbdev/omap/hwa742.c
index a4ee65b8f918..a4ee65b8f918 100644
--- a/drivers/video/omap/hwa742.c
+++ b/drivers/video/fbdev/omap/hwa742.c
diff --git a/drivers/video/omap/lcd_ams_delta.c b/drivers/video/fbdev/omap/lcd_ams_delta.c
index 4a5f2cd3d3bf..4a5f2cd3d3bf 100644
--- a/drivers/video/omap/lcd_ams_delta.c
+++ b/drivers/video/fbdev/omap/lcd_ams_delta.c
diff --git a/drivers/video/omap/lcd_h3.c b/drivers/video/fbdev/omap/lcd_h3.c
index 49bdeca81e50..49bdeca81e50 100644
--- a/drivers/video/omap/lcd_h3.c
+++ b/drivers/video/fbdev/omap/lcd_h3.c
diff --git a/drivers/video/omap/lcd_htcherald.c b/drivers/video/fbdev/omap/lcd_htcherald.c
index 20f477851d54..20f477851d54 100644
--- a/drivers/video/omap/lcd_htcherald.c
+++ b/drivers/video/fbdev/omap/lcd_htcherald.c
diff --git a/drivers/video/omap/lcd_inn1510.c b/drivers/video/fbdev/omap/lcd_inn1510.c
index 2ee423279e35..2ee423279e35 100644
--- a/drivers/video/omap/lcd_inn1510.c
+++ b/drivers/video/fbdev/omap/lcd_inn1510.c
diff --git a/drivers/video/omap/lcd_inn1610.c b/drivers/video/fbdev/omap/lcd_inn1610.c
index e3d3d135aa48..e3d3d135aa48 100644
--- a/drivers/video/omap/lcd_inn1610.c
+++ b/drivers/video/fbdev/omap/lcd_inn1610.c
diff --git a/drivers/video/omap/lcd_mipid.c b/drivers/video/fbdev/omap/lcd_mipid.c
index 803fee618d57..803fee618d57 100644
--- a/drivers/video/omap/lcd_mipid.c
+++ b/drivers/video/fbdev/omap/lcd_mipid.c
diff --git a/drivers/video/omap/lcd_osk.c b/drivers/video/fbdev/omap/lcd_osk.c
index 7fbe04bce0ed..7fbe04bce0ed 100644
--- a/drivers/video/omap/lcd_osk.c
+++ b/drivers/video/fbdev/omap/lcd_osk.c
diff --git a/drivers/video/omap/lcd_palmte.c b/drivers/video/fbdev/omap/lcd_palmte.c
index ff4fb624b904..ff4fb624b904 100644
--- a/drivers/video/omap/lcd_palmte.c
+++ b/drivers/video/fbdev/omap/lcd_palmte.c
diff --git a/drivers/video/omap/lcd_palmtt.c b/drivers/video/fbdev/omap/lcd_palmtt.c
index aaf3c8ba1243..aaf3c8ba1243 100644
--- a/drivers/video/omap/lcd_palmtt.c
+++ b/drivers/video/fbdev/omap/lcd_palmtt.c
diff --git a/drivers/video/omap/lcd_palmz71.c b/drivers/video/fbdev/omap/lcd_palmz71.c
index 3b7d8aa1cf34..3b7d8aa1cf34 100644
--- a/drivers/video/omap/lcd_palmz71.c
+++ b/drivers/video/fbdev/omap/lcd_palmz71.c
diff --git a/drivers/video/omap/lcdc.c b/drivers/video/fbdev/omap/lcdc.c
index b52f62595f65..b52f62595f65 100644
--- a/drivers/video/omap/lcdc.c
+++ b/drivers/video/fbdev/omap/lcdc.c
diff --git a/drivers/video/omap/lcdc.h b/drivers/video/fbdev/omap/lcdc.h
index 845222270db3..845222270db3 100644
--- a/drivers/video/omap/lcdc.h
+++ b/drivers/video/fbdev/omap/lcdc.h
diff --git a/drivers/video/omap/omapfb.h b/drivers/video/fbdev/omap/omapfb.h
index 2921d20e4fba..2921d20e4fba 100644
--- a/drivers/video/omap/omapfb.h
+++ b/drivers/video/fbdev/omap/omapfb.h
diff --git a/drivers/video/omap/omapfb_main.c b/drivers/video/fbdev/omap/omapfb_main.c
index e4fc6d9b5371..e4fc6d9b5371 100644
--- a/drivers/video/omap/omapfb_main.c
+++ b/drivers/video/fbdev/omap/omapfb_main.c
diff --git a/drivers/video/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c
index d4e7684e7045..d4e7684e7045 100644
--- a/drivers/video/omap/sossi.c
+++ b/drivers/video/fbdev/omap/sossi.c
diff --git a/drivers/video/fbdev/omap2/Kconfig b/drivers/video/fbdev/omap2/Kconfig
new file mode 100644
index 000000000000..c22955d2de9a
--- /dev/null
+++ b/drivers/video/fbdev/omap2/Kconfig
@@ -0,0 +1,10 @@
+config OMAP2_VRFB
+	bool
+
+if ARCH_OMAP2PLUS
+
+source "drivers/video/fbdev/omap2/dss/Kconfig"
+source "drivers/video/fbdev/omap2/omapfb/Kconfig"
+source "drivers/video/fbdev/omap2/displays-new/Kconfig"
+
+endif
diff --git a/drivers/video/omap2/Makefile b/drivers/video/fbdev/omap2/Makefile
index bf8127df8c71..bf8127df8c71 100644
--- a/drivers/video/omap2/Makefile
+++ b/drivers/video/fbdev/omap2/Makefile
diff --git a/drivers/video/omap2/displays-new/Kconfig b/drivers/video/fbdev/omap2/displays-new/Kconfig
index e6cfc38160d3..e6cfc38160d3 100644
--- a/drivers/video/omap2/displays-new/Kconfig
+++ b/drivers/video/fbdev/omap2/displays-new/Kconfig
diff --git a/drivers/video/omap2/displays-new/Makefile b/drivers/video/fbdev/omap2/displays-new/Makefile
index 0323a8a1c682..0323a8a1c682 100644
--- a/drivers/video/omap2/displays-new/Makefile
+++ b/drivers/video/fbdev/omap2/displays-new/Makefile
diff --git a/drivers/video/omap2/displays-new/connector-analog-tv.c b/drivers/video/fbdev/omap2/displays-new/connector-analog-tv.c
index 5ee3b5505f7f..5ee3b5505f7f 100644
--- a/drivers/video/omap2/displays-new/connector-analog-tv.c
+++ b/drivers/video/fbdev/omap2/displays-new/connector-analog-tv.c
diff --git a/drivers/video/omap2/displays-new/connector-dvi.c b/drivers/video/fbdev/omap2/displays-new/connector-dvi.c
index 74de2bc50c4f..74de2bc50c4f 100644
--- a/drivers/video/omap2/displays-new/connector-dvi.c
+++ b/drivers/video/fbdev/omap2/displays-new/connector-dvi.c
diff --git a/drivers/video/omap2/displays-new/connector-hdmi.c b/drivers/video/fbdev/omap2/displays-new/connector-hdmi.c
index 29ed21b9dce5..29ed21b9dce5 100644
--- a/drivers/video/omap2/displays-new/connector-hdmi.c
+++ b/drivers/video/fbdev/omap2/displays-new/connector-hdmi.c
diff --git a/drivers/video/omap2/displays-new/encoder-tfp410.c b/drivers/video/fbdev/omap2/displays-new/encoder-tfp410.c
index b4e9a42a79e6..b4e9a42a79e6 100644
--- a/drivers/video/omap2/displays-new/encoder-tfp410.c
+++ b/drivers/video/fbdev/omap2/displays-new/encoder-tfp410.c
diff --git a/drivers/video/omap2/displays-new/encoder-tpd12s015.c b/drivers/video/fbdev/omap2/displays-new/encoder-tpd12s015.c
index 7e33686171e3..7e33686171e3 100644
--- a/drivers/video/omap2/displays-new/encoder-tpd12s015.c
+++ b/drivers/video/fbdev/omap2/displays-new/encoder-tpd12s015.c
diff --git a/drivers/video/omap2/displays-new/panel-dpi.c b/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
index 5f8f7e7c81ef..5f8f7e7c81ef 100644
--- a/drivers/video/omap2/displays-new/panel-dpi.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-dpi.c
diff --git a/drivers/video/omap2/displays-new/panel-dsi-cm.c b/drivers/video/fbdev/omap2/displays-new/panel-dsi-cm.c
index d6f14e8717e8..d6f14e8717e8 100644
--- a/drivers/video/omap2/displays-new/panel-dsi-cm.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-dsi-cm.c
diff --git a/drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
index 2e6b513222d9..2e6b513222d9 100644
--- a/drivers/video/omap2/displays-new/panel-lgphilips-lb035q02.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-lgphilips-lb035q02.c
diff --git a/drivers/video/omap2/displays-new/panel-nec-nl8048hl11.c b/drivers/video/fbdev/omap2/displays-new/panel-nec-nl8048hl11.c
index 996fa004b48c..996fa004b48c 100644
--- a/drivers/video/omap2/displays-new/panel-nec-nl8048hl11.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-nec-nl8048hl11.c
diff --git a/drivers/video/omap2/displays-new/panel-sharp-ls037v7dw01.c b/drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c
index b2f710be565d..b2f710be565d 100644
--- a/drivers/video/omap2/displays-new/panel-sharp-ls037v7dw01.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-sharp-ls037v7dw01.c
diff --git a/drivers/video/omap2/displays-new/panel-sony-acx565akm.c b/drivers/video/fbdev/omap2/displays-new/panel-sony-acx565akm.c
index c7ba4d8b928a..c7ba4d8b928a 100644
--- a/drivers/video/omap2/displays-new/panel-sony-acx565akm.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-sony-acx565akm.c
diff --git a/drivers/video/omap2/displays-new/panel-tpo-td028ttec1.c b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
index fae6adc005a7..fae6adc005a7 100644
--- a/drivers/video/omap2/displays-new/panel-tpo-td028ttec1.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td028ttec1.c
diff --git a/drivers/video/omap2/displays-new/panel-tpo-td043mtea1.c b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td043mtea1.c
index 875b40263b33..875b40263b33 100644
--- a/drivers/video/omap2/displays-new/panel-tpo-td043mtea1.c
+++ b/drivers/video/fbdev/omap2/displays-new/panel-tpo-td043mtea1.c
diff --git a/drivers/video/omap2/dss/Kconfig b/drivers/video/fbdev/omap2/dss/Kconfig
index dde4281663b1..dde4281663b1 100644
--- a/drivers/video/omap2/dss/Kconfig
+++ b/drivers/video/fbdev/omap2/dss/Kconfig
diff --git a/drivers/video/omap2/dss/Makefile b/drivers/video/fbdev/omap2/dss/Makefile
index 8aec8bda27cc..8aec8bda27cc 100644
--- a/drivers/video/omap2/dss/Makefile
+++ b/drivers/video/fbdev/omap2/dss/Makefile
diff --git a/drivers/video/omap2/dss/apply.c b/drivers/video/fbdev/omap2/dss/apply.c
index 0a0b084ce65d..0a0b084ce65d 100644
--- a/drivers/video/omap2/dss/apply.c
+++ b/drivers/video/fbdev/omap2/dss/apply.c
diff --git a/drivers/video/omap2/dss/core.c b/drivers/video/fbdev/omap2/dss/core.c
index ffa45c894cd4..ffa45c894cd4 100644
--- a/drivers/video/omap2/dss/core.c
+++ b/drivers/video/fbdev/omap2/dss/core.c
diff --git a/drivers/video/omap2/dss/dispc-compat.c b/drivers/video/fbdev/omap2/dss/dispc-compat.c
index 83779c2b292a..83779c2b292a 100644
--- a/drivers/video/omap2/dss/dispc-compat.c
+++ b/drivers/video/fbdev/omap2/dss/dispc-compat.c
diff --git a/drivers/video/omap2/dss/dispc-compat.h b/drivers/video/fbdev/omap2/dss/dispc-compat.h
index 14a69b3d4fb0..14a69b3d4fb0 100644
--- a/drivers/video/omap2/dss/dispc-compat.h
+++ b/drivers/video/fbdev/omap2/dss/dispc-compat.h
diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/fbdev/omap2/dss/dispc.c
index 2bbdb7ff7daf..f18397c33e8f 100644
--- a/drivers/video/omap2/dss/dispc.c
+++ b/drivers/video/fbdev/omap2/dss/dispc.c
@@ -101,6 +101,8 @@ static struct {
 	void __iomem    *base;
 
 	int irq;
+	irq_handler_t user_handler;
+	void *user_data;
 
 	unsigned long core_clk_rate;
 	unsigned long tv_pclk_rate;
@@ -113,6 +115,8 @@ static struct {
 	u32		ctx[DISPC_SZ_REGS / sizeof(u32)];
 
 	const struct dispc_features *feat;
+
+	bool is_enabled;
 } dispc;
 
 enum omap_color_component {
@@ -141,12 +145,18 @@ enum mgr_reg_fields {
 	DISPC_MGR_FLD_NUM,
 };
 
+struct dispc_reg_field {
+	u16 reg;
+	u8 high;
+	u8 low;
+};
+
 static const struct {
 	const char *name;
 	u32 vsync_irq;
 	u32 framedone_irq;
 	u32 sync_lost_irq;
-	struct reg_field reg_desc[DISPC_MGR_FLD_NUM];
+	struct dispc_reg_field reg_desc[DISPC_MGR_FLD_NUM];
 } mgr_desc[] = {
 	[OMAP_DSS_CHANNEL_LCD] = {
 		.name		= "LCD",
@@ -238,13 +248,13 @@ static inline u32 dispc_read_reg(const u16 idx)
 
 static u32 mgr_fld_read(enum omap_channel channel, enum mgr_reg_fields regfld)
 {
-	const struct reg_field rfld = mgr_desc[channel].reg_desc[regfld];
+	const struct dispc_reg_field rfld = mgr_desc[channel].reg_desc[regfld];
 	return REG_GET(rfld.reg, rfld.high, rfld.low);
 }
 
 static void mgr_fld_write(enum omap_channel channel,
 					enum mgr_reg_fields regfld, int val) {
-	const struct reg_field rfld = mgr_desc[channel].reg_desc[regfld];
+	const struct dispc_reg_field rfld = mgr_desc[channel].reg_desc[regfld];
 	REG_FLD_MOD(rfld.reg, val, rfld.high, rfld.low);
 }
 
@@ -3669,16 +3679,44 @@ static int __init dispc_init_features(struct platform_device *pdev)
 	return 0;
 }
 
+static irqreturn_t dispc_irq_handler(int irq, void *arg)
+{
+	if (!dispc.is_enabled)
+		return IRQ_NONE;
+
+	return dispc.user_handler(irq, dispc.user_data);
+}
+
 int dispc_request_irq(irq_handler_t handler, void *dev_id)
 {
-	return devm_request_irq(&dispc.pdev->dev, dispc.irq, handler,
-			     IRQF_SHARED, "OMAP DISPC", dev_id);
+	int r;
+
+	if (dispc.user_handler != NULL)
+		return -EBUSY;
+
+	dispc.user_handler = handler;
+	dispc.user_data = dev_id;
+
+	/* ensure the dispc_irq_handler sees the values above */
+	smp_wmb();
+
+	r = devm_request_irq(&dispc.pdev->dev, dispc.irq, dispc_irq_handler,
+			     IRQF_SHARED, "OMAP DISPC", &dispc);
+	if (r) {
+		dispc.user_handler = NULL;
+		dispc.user_data = NULL;
+	}
+
+	return r;
 }
 EXPORT_SYMBOL(dispc_request_irq);
 
 void dispc_free_irq(void *dev_id)
 {
-	devm_free_irq(&dispc.pdev->dev, dispc.irq, dev_id);
+	devm_free_irq(&dispc.pdev->dev, dispc.irq, &dispc);
+
+	dispc.user_handler = NULL;
+	dispc.user_data = NULL;
 }
 EXPORT_SYMBOL(dispc_free_irq);
 
@@ -3750,6 +3788,12 @@ static int __exit omap_dispchw_remove(struct platform_device *pdev)
 
 static int dispc_runtime_suspend(struct device *dev)
 {
+	dispc.is_enabled = false;
+	/* ensure the dispc_irq_handler sees the is_enabled value */
+	smp_wmb();
+	/* wait for current handler to finish before turning the DISPC off */
+	synchronize_irq(dispc.irq);
+
 	dispc_save_context();
 
 	return 0;
@@ -3763,12 +3807,15 @@ static int dispc_runtime_resume(struct device *dev)
 	 * _omap_dispc_initial_config(). We can thus use it to detect if
 	 * we have lost register context.
 	 */
-	if (REG_GET(DISPC_CONFIG, 2, 1) == OMAP_DSS_LOAD_FRAME_ONLY)
-		return 0;
+	if (REG_GET(DISPC_CONFIG, 2, 1) != OMAP_DSS_LOAD_FRAME_ONLY) {
+		_omap_dispc_initial_config();
 
-	_omap_dispc_initial_config();
+		dispc_restore_context();
+	}
 
-	dispc_restore_context();
+	dispc.is_enabled = true;
+	/* ensure the dispc_irq_handler sees the is_enabled value */
+	smp_wmb();
 
 	return 0;
 }
diff --git a/drivers/video/omap2/dss/dispc.h b/drivers/video/fbdev/omap2/dss/dispc.h
index 78edb449c763..78edb449c763 100644
--- a/drivers/video/omap2/dss/dispc.h
+++ b/drivers/video/fbdev/omap2/dss/dispc.h
diff --git a/drivers/video/omap2/dss/dispc_coefs.c b/drivers/video/fbdev/omap2/dss/dispc_coefs.c
index 038c15b04215..038c15b04215 100644
--- a/drivers/video/omap2/dss/dispc_coefs.c
+++ b/drivers/video/fbdev/omap2/dss/dispc_coefs.c
diff --git a/drivers/video/omap2/dss/display-sysfs.c b/drivers/video/fbdev/omap2/dss/display-sysfs.c
index 5a2095a98ed8..5a2095a98ed8 100644
--- a/drivers/video/omap2/dss/display-sysfs.c
+++ b/drivers/video/fbdev/omap2/dss/display-sysfs.c
diff --git a/drivers/video/omap2/dss/display.c b/drivers/video/fbdev/omap2/dss/display.c
index 2412a0dd0c13..2412a0dd0c13 100644
--- a/drivers/video/omap2/dss/display.c
+++ b/drivers/video/fbdev/omap2/dss/display.c
diff --git a/drivers/video/omap2/dss/dpi.c b/drivers/video/fbdev/omap2/dss/dpi.c
index 157921db447a..157921db447a 100644
--- a/drivers/video/omap2/dss/dpi.c
+++ b/drivers/video/fbdev/omap2/dss/dpi.c
diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/fbdev/omap2/dss/dsi.c
index 121d1049d0bc..8be9b04d8849 100644
--- a/drivers/video/omap2/dss/dsi.c
+++ b/drivers/video/fbdev/omap2/dss/dsi.c
@@ -297,6 +297,8 @@ struct dsi_data {
 
 	int irq;
 
+	bool is_enabled;
+
 	struct clk *dss_clk;
 	struct clk *sys_clk;
 
@@ -795,6 +797,9 @@ static irqreturn_t omap_dsi_irq_handler(int irq, void *arg)
 	dsidev = (struct platform_device *) arg;
 	dsi = dsi_get_dsidrv_data(dsidev);
 
+	if (!dsi->is_enabled)
+		return IRQ_NONE;
+
 	spin_lock(&dsi->irq_lock);
 
 	irqstatus = dsi_read_reg(dsidev, DSI_IRQSTATUS);
@@ -5671,6 +5676,15 @@ static int __exit omap_dsihw_remove(struct platform_device *dsidev)
 
 static int dsi_runtime_suspend(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(pdev);
+
+	dsi->is_enabled = false;
+	/* ensure the irq handler sees the is_enabled value */
+	smp_wmb();
+	/* wait for current handler to finish before turning the DSI off */
+	synchronize_irq(dsi->irq);
+
 	dispc_runtime_put();
 
 	return 0;
@@ -5678,12 +5692,18 @@ static int dsi_runtime_suspend(struct device *dev)
 
 static int dsi_runtime_resume(struct device *dev)
 {
+	struct platform_device *pdev = to_platform_device(dev);
+	struct dsi_data *dsi = dsi_get_dsidrv_data(pdev);
 	int r;
 
 	r = dispc_runtime_get();
 	if (r)
 		return r;
 
+	dsi->is_enabled = true;
+	/* ensure the irq handler sees the is_enabled value */
+	smp_wmb();
+
 	return 0;
 }
 
diff --git a/drivers/video/omap2/dss/dss-of.c b/drivers/video/fbdev/omap2/dss/dss-of.c
index a4b20aaf6142..a4b20aaf6142 100644
--- a/drivers/video/omap2/dss/dss-of.c
+++ b/drivers/video/fbdev/omap2/dss/dss-of.c
diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/fbdev/omap2/dss/dss.c
index 825c019ddee7..d55266c0e029 100644
--- a/drivers/video/omap2/dss/dss.c
+++ b/drivers/video/fbdev/omap2/dss/dss.c
@@ -457,7 +457,7 @@ bool dss_div_calc(unsigned long pck, unsigned long fck_min,
 	fckd_stop = max(DIV_ROUND_UP(prate * m, fck_hw_max), 1ul);
 
 	for (fckd = fckd_start; fckd >= fckd_stop; --fckd) {
-		fck = prate / fckd * m;
+		fck = DIV_ROUND_UP(prate, fckd) * m;
 
 		if (func(fck, data))
 			return true;
@@ -506,7 +506,7 @@ static int dss_setup_default_clock(void)
 
 		fck_div = DIV_ROUND_UP(prate * dss.feat->dss_fck_multiplier,
 				max_dss_fck);
-		fck = prate / fck_div * dss.feat->dss_fck_multiplier;
+		fck = DIV_ROUND_UP(prate, fck_div) * dss.feat->dss_fck_multiplier;
 	}
 
 	r = dss_set_fck_rate(fck);
diff --git a/drivers/video/omap2/dss/dss.h b/drivers/video/fbdev/omap2/dss/dss.h
index 918fec182424..560078fcb198 100644
--- a/drivers/video/omap2/dss/dss.h
+++ b/drivers/video/fbdev/omap2/dss/dss.h
@@ -131,12 +131,6 @@ struct dsi_clock_info {
 	u16 lp_clk_div;
 };
 
-struct reg_field {
-	u16 reg;
-	u8 high;
-	u8 low;
-};
-
 struct dss_lcd_mgr_config {
 	enum dss_io_pad_mode io_pad_mode;
 
diff --git a/drivers/video/omap2/dss/dss_features.c b/drivers/video/fbdev/omap2/dss/dss_features.c
index 7f8969191dc6..7f8969191dc6 100644
--- a/drivers/video/omap2/dss/dss_features.c
+++ b/drivers/video/fbdev/omap2/dss/dss_features.c
diff --git a/drivers/video/omap2/dss/dss_features.h b/drivers/video/fbdev/omap2/dss/dss_features.h
index e3ef3b714896..e3ef3b714896 100644
--- a/drivers/video/omap2/dss/dss_features.h
+++ b/drivers/video/fbdev/omap2/dss/dss_features.h
diff --git a/drivers/video/omap2/dss/hdmi.h b/drivers/video/fbdev/omap2/dss/hdmi.h
index e25681ff5a70..e25681ff5a70 100644
--- a/drivers/video/omap2/dss/hdmi.h
+++ b/drivers/video/fbdev/omap2/dss/hdmi.h
diff --git a/drivers/video/omap2/dss/hdmi4.c b/drivers/video/fbdev/omap2/dss/hdmi4.c
index f5f7944a1fd1..f5f7944a1fd1 100644
--- a/drivers/video/omap2/dss/hdmi4.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi4.c
diff --git a/drivers/video/omap2/dss/hdmi4_core.c b/drivers/video/fbdev/omap2/dss/hdmi4_core.c
index 2eb04dcf807c..2eb04dcf807c 100644
--- a/drivers/video/omap2/dss/hdmi4_core.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi4_core.c
diff --git a/drivers/video/omap2/dss/hdmi4_core.h b/drivers/video/fbdev/omap2/dss/hdmi4_core.h
index bb646896fa82..bb646896fa82 100644
--- a/drivers/video/omap2/dss/hdmi4_core.h
+++ b/drivers/video/fbdev/omap2/dss/hdmi4_core.h
diff --git a/drivers/video/omap2/dss/hdmi_common.c b/drivers/video/fbdev/omap2/dss/hdmi_common.c
index b11afac8e068..0b12a3f62fe1 100644
--- a/drivers/video/omap2/dss/hdmi_common.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_common.c
@@ -347,17 +347,17 @@ int hdmi_compute_acr(u32 pclk, u32 sample_freq, u32 *n, u32 *cts)
 	case 96000:
 	case 192000:
 		if (deep_color == 125)
-			if (pclk == 27027 || pclk == 74250)
+			if (pclk == 27027000 || pclk == 74250000)
 				deep_color_correct = true;
 		if (deep_color == 150)
-			if (pclk == 27027)
+			if (pclk == 27027000)
 				deep_color_correct = true;
 		break;
 	case 44100:
 	case 88200:
 	case 176400:
 		if (deep_color == 125)
-			if (pclk == 27027)
+			if (pclk == 27027000)
 				deep_color_correct = true;
 		break;
 	default:
@@ -418,7 +418,7 @@ int hdmi_compute_acr(u32 pclk, u32 sample_freq, u32 *n, u32 *cts)
 		}
 	}
 	/* Calculate CTS. See HDMI 1.3a or 1.4a specifications */
-	*cts = pclk * (*n / 128) * deep_color / (sample_freq / 10);
+	*cts = (pclk/1000) * (*n / 128) * deep_color / (sample_freq / 10);
 
 	return 0;
 }
diff --git a/drivers/video/omap2/dss/hdmi_phy.c b/drivers/video/fbdev/omap2/dss/hdmi_phy.c
index dd376ce8da01..dd376ce8da01 100644
--- a/drivers/video/omap2/dss/hdmi_phy.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_phy.c
diff --git a/drivers/video/omap2/dss/hdmi_pll.c b/drivers/video/fbdev/omap2/dss/hdmi_pll.c
index 5fc71215c303..5fc71215c303 100644
--- a/drivers/video/omap2/dss/hdmi_pll.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_pll.c
diff --git a/drivers/video/omap2/dss/hdmi_wp.c b/drivers/video/fbdev/omap2/dss/hdmi_wp.c
index f5f4ccf50d90..f5f4ccf50d90 100644
--- a/drivers/video/omap2/dss/hdmi_wp.c
+++ b/drivers/video/fbdev/omap2/dss/hdmi_wp.c
diff --git a/drivers/video/omap2/dss/manager-sysfs.c b/drivers/video/fbdev/omap2/dss/manager-sysfs.c
index 37b59fe28dc8..37b59fe28dc8 100644
--- a/drivers/video/omap2/dss/manager-sysfs.c
+++ b/drivers/video/fbdev/omap2/dss/manager-sysfs.c
diff --git a/drivers/video/omap2/dss/manager.c b/drivers/video/fbdev/omap2/dss/manager.c
index 1aac9b4191a9..1aac9b4191a9 100644
--- a/drivers/video/omap2/dss/manager.c
+++ b/drivers/video/fbdev/omap2/dss/manager.c
diff --git a/drivers/video/omap2/dss/output.c b/drivers/video/fbdev/omap2/dss/output.c
index 2ab3afa615e8..2ab3afa615e8 100644
--- a/drivers/video/omap2/dss/output.c
+++ b/drivers/video/fbdev/omap2/dss/output.c
diff --git a/drivers/video/omap2/dss/overlay-sysfs.c b/drivers/video/fbdev/omap2/dss/overlay-sysfs.c
index 4cc5ddebfb34..4cc5ddebfb34 100644
--- a/drivers/video/omap2/dss/overlay-sysfs.c
+++ b/drivers/video/fbdev/omap2/dss/overlay-sysfs.c
diff --git a/drivers/video/omap2/dss/overlay.c b/drivers/video/fbdev/omap2/dss/overlay.c
index 2f7cee985cdd..2f7cee985cdd 100644
--- a/drivers/video/omap2/dss/overlay.c
+++ b/drivers/video/fbdev/omap2/dss/overlay.c
diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/fbdev/omap2/dss/rfbi.c
index c8a81a2b879c..c8a81a2b879c 100644
--- a/drivers/video/omap2/dss/rfbi.c
+++ b/drivers/video/fbdev/omap2/dss/rfbi.c
diff --git a/drivers/video/omap2/dss/sdi.c b/drivers/video/fbdev/omap2/dss/sdi.c
index 911dcc9173a6..911dcc9173a6 100644
--- a/drivers/video/omap2/dss/sdi.c
+++ b/drivers/video/fbdev/omap2/dss/sdi.c
diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/fbdev/omap2/dss/venc.c
index 21d81113962b..21d81113962b 100644
--- a/drivers/video/omap2/dss/venc.c
+++ b/drivers/video/fbdev/omap2/dss/venc.c
diff --git a/drivers/video/omap2/dss/venc_panel.c b/drivers/video/fbdev/omap2/dss/venc_panel.c
index af68cd444d7e..af68cd444d7e 100644
--- a/drivers/video/omap2/dss/venc_panel.c
+++ b/drivers/video/fbdev/omap2/dss/venc_panel.c
diff --git a/drivers/video/omap2/omapfb/Kconfig b/drivers/video/fbdev/omap2/omapfb/Kconfig
index 4cb12ce68855..4cb12ce68855 100644
--- a/drivers/video/omap2/omapfb/Kconfig
+++ b/drivers/video/fbdev/omap2/omapfb/Kconfig
diff --git a/drivers/video/omap2/omapfb/Makefile b/drivers/video/fbdev/omap2/omapfb/Makefile
index 51c2e00d9bf8..51c2e00d9bf8 100644
--- a/drivers/video/omap2/omapfb/Makefile
+++ b/drivers/video/fbdev/omap2/omapfb/Makefile
diff --git a/drivers/video/omap2/omapfb/omapfb-ioctl.c b/drivers/video/fbdev/omap2/omapfb/omapfb-ioctl.c
index 146b6f5428db..146b6f5428db 100644
--- a/drivers/video/omap2/omapfb/omapfb-ioctl.c
+++ b/drivers/video/fbdev/omap2/omapfb/omapfb-ioctl.c
diff --git a/drivers/video/omap2/omapfb/omapfb-main.c b/drivers/video/fbdev/omap2/omapfb/omapfb-main.c
index ec2d132c782d..ec2d132c782d 100644
--- a/drivers/video/omap2/omapfb/omapfb-main.c
+++ b/drivers/video/fbdev/omap2/omapfb/omapfb-main.c
diff --git a/drivers/video/omap2/omapfb/omapfb-sysfs.c b/drivers/video/fbdev/omap2/omapfb/omapfb-sysfs.c
index 18fa9e1d0033..18fa9e1d0033 100644
--- a/drivers/video/omap2/omapfb/omapfb-sysfs.c
+++ b/drivers/video/fbdev/omap2/omapfb/omapfb-sysfs.c
diff --git a/drivers/video/omap2/omapfb/omapfb.h b/drivers/video/fbdev/omap2/omapfb/omapfb.h
index 623cd872a367..623cd872a367 100644
--- a/drivers/video/omap2/omapfb/omapfb.h
+++ b/drivers/video/fbdev/omap2/omapfb/omapfb.h
diff --git a/drivers/video/omap2/vrfb.c b/drivers/video/fbdev/omap2/vrfb.c
index f346b02eee1d..f346b02eee1d 100644
--- a/drivers/video/omap2/vrfb.c
+++ b/drivers/video/fbdev/omap2/vrfb.c
diff --git a/drivers/video/p9100.c b/drivers/video/fbdev/p9100.c
index 367cea8f43f3..367cea8f43f3 100644
--- a/drivers/video/p9100.c
+++ b/drivers/video/fbdev/p9100.c
diff --git a/drivers/video/platinumfb.c b/drivers/video/fbdev/platinumfb.c
index 4c9299576827..4c9299576827 100644
--- a/drivers/video/platinumfb.c
+++ b/drivers/video/fbdev/platinumfb.c
diff --git a/drivers/video/platinumfb.h b/drivers/video/fbdev/platinumfb.h
index f6bd77cafd17..f6bd77cafd17 100644
--- a/drivers/video/platinumfb.h
+++ b/drivers/video/fbdev/platinumfb.h
diff --git a/drivers/video/pm2fb.c b/drivers/video/fbdev/pm2fb.c
index 3b85b647bc10..3b85b647bc10 100644
--- a/drivers/video/pm2fb.c
+++ b/drivers/video/fbdev/pm2fb.c
diff --git a/drivers/video/pm3fb.c b/drivers/video/fbdev/pm3fb.c
index 4bf3273d0433..4bf3273d0433 100644
--- a/drivers/video/pm3fb.c
+++ b/drivers/video/fbdev/pm3fb.c
diff --git a/drivers/video/pmag-aa-fb.c b/drivers/video/fbdev/pmag-aa-fb.c
index 838424817de2..838424817de2 100644
--- a/drivers/video/pmag-aa-fb.c
+++ b/drivers/video/fbdev/pmag-aa-fb.c
diff --git a/drivers/video/pmag-ba-fb.c b/drivers/video/fbdev/pmag-ba-fb.c
index 914a52ba8477..914a52ba8477 100644
--- a/drivers/video/pmag-ba-fb.c
+++ b/drivers/video/fbdev/pmag-ba-fb.c
diff --git a/drivers/video/pmagb-b-fb.c b/drivers/video/fbdev/pmagb-b-fb.c
index 0822b6f8dddc..0822b6f8dddc 100644
--- a/drivers/video/pmagb-b-fb.c
+++ b/drivers/video/fbdev/pmagb-b-fb.c
diff --git a/drivers/video/ps3fb.c b/drivers/video/fbdev/ps3fb.c
index b269abd932aa..b269abd932aa 100644
--- a/drivers/video/ps3fb.c
+++ b/drivers/video/fbdev/ps3fb.c
diff --git a/drivers/video/pvr2fb.c b/drivers/video/fbdev/pvr2fb.c
index 167cffff3d4e..167cffff3d4e 100644
--- a/drivers/video/pvr2fb.c
+++ b/drivers/video/fbdev/pvr2fb.c
diff --git a/drivers/video/pxa168fb.c b/drivers/video/fbdev/pxa168fb.c
index c95b9e46d48f..c95b9e46d48f 100644
--- a/drivers/video/pxa168fb.c
+++ b/drivers/video/fbdev/pxa168fb.c
diff --git a/drivers/video/pxa168fb.h b/drivers/video/fbdev/pxa168fb.h
index eee09279c524..eee09279c524 100644
--- a/drivers/video/pxa168fb.h
+++ b/drivers/video/fbdev/pxa168fb.h
diff --git a/drivers/video/pxa3xx-gcu.c b/drivers/video/fbdev/pxa3xx-gcu.c
index 417f9a27eb7d..417f9a27eb7d 100644
--- a/drivers/video/pxa3xx-gcu.c
+++ b/drivers/video/fbdev/pxa3xx-gcu.c
diff --git a/drivers/video/pxa3xx-gcu.h b/drivers/video/fbdev/pxa3xx-gcu.h
index 0428ed03dc49..0428ed03dc49 100644
--- a/drivers/video/pxa3xx-gcu.h
+++ b/drivers/video/fbdev/pxa3xx-gcu.h
diff --git a/drivers/video/pxafb.c b/drivers/video/fbdev/pxafb.c
index 1ecd9cec2921..1ecd9cec2921 100644
--- a/drivers/video/pxafb.c
+++ b/drivers/video/fbdev/pxafb.c
diff --git a/drivers/video/pxafb.h b/drivers/video/fbdev/pxafb.h
index 26ba9fa3f737..26ba9fa3f737 100644
--- a/drivers/video/pxafb.h
+++ b/drivers/video/fbdev/pxafb.h
diff --git a/drivers/video/q40fb.c b/drivers/video/fbdev/q40fb.c
index 7487f76f6275..7487f76f6275 100644
--- a/drivers/video/q40fb.c
+++ b/drivers/video/fbdev/q40fb.c
diff --git a/drivers/video/riva/Makefile b/drivers/video/fbdev/riva/Makefile
index 8898c9915b02..8898c9915b02 100644
--- a/drivers/video/riva/Makefile
+++ b/drivers/video/fbdev/riva/Makefile
diff --git a/drivers/video/riva/fbdev.c b/drivers/video/fbdev/riva/fbdev.c
index 8a8d7f060784..8a8d7f060784 100644
--- a/drivers/video/riva/fbdev.c
+++ b/drivers/video/fbdev/riva/fbdev.c
diff --git a/drivers/video/riva/nv_driver.c b/drivers/video/fbdev/riva/nv_driver.c
index f3694cf17e58..f3694cf17e58 100644
--- a/drivers/video/riva/nv_driver.c
+++ b/drivers/video/fbdev/riva/nv_driver.c
diff --git a/drivers/video/riva/nv_type.h b/drivers/video/fbdev/riva/nv_type.h
index a69480c9a67c..a69480c9a67c 100644
--- a/drivers/video/riva/nv_type.h
+++ b/drivers/video/fbdev/riva/nv_type.h
diff --git a/drivers/video/riva/nvreg.h b/drivers/video/fbdev/riva/nvreg.h
index abfc167ae8d8..abfc167ae8d8 100644
--- a/drivers/video/riva/nvreg.h
+++ b/drivers/video/fbdev/riva/nvreg.h
diff --git a/drivers/video/riva/riva_hw.c b/drivers/video/fbdev/riva/riva_hw.c
index 78fdbf5178d7..78fdbf5178d7 100644
--- a/drivers/video/riva/riva_hw.c
+++ b/drivers/video/fbdev/riva/riva_hw.c
diff --git a/drivers/video/riva/riva_hw.h b/drivers/video/fbdev/riva/riva_hw.h
index c2769f73e0b2..c2769f73e0b2 100644
--- a/drivers/video/riva/riva_hw.h
+++ b/drivers/video/fbdev/riva/riva_hw.h
diff --git a/drivers/video/riva/riva_tbl.h b/drivers/video/fbdev/riva/riva_tbl.h
index 7ee7d72932d4..7ee7d72932d4 100644
--- a/drivers/video/riva/riva_tbl.h
+++ b/drivers/video/fbdev/riva/riva_tbl.h
diff --git a/drivers/video/riva/rivafb-i2c.c b/drivers/video/fbdev/riva/rivafb-i2c.c
index 6a183375ced1..6a183375ced1 100644
--- a/drivers/video/riva/rivafb-i2c.c
+++ b/drivers/video/fbdev/riva/rivafb-i2c.c
diff --git a/drivers/video/riva/rivafb.h b/drivers/video/fbdev/riva/rivafb.h
index d9f107b704c6..d9f107b704c6 100644
--- a/drivers/video/riva/rivafb.h
+++ b/drivers/video/fbdev/riva/rivafb.h
diff --git a/drivers/video/s1d13xxxfb.c b/drivers/video/fbdev/s1d13xxxfb.c
index 83433cb0dfba..83433cb0dfba 100644
--- a/drivers/video/s1d13xxxfb.c
+++ b/drivers/video/fbdev/s1d13xxxfb.c
diff --git a/drivers/video/s3c-fb.c b/drivers/video/fbdev/s3c-fb.c
index 62acae2694a9..62acae2694a9 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/fbdev/s3c-fb.c
diff --git a/drivers/video/s3c2410fb.c b/drivers/video/fbdev/s3c2410fb.c
index 81af5a63e9e1..81af5a63e9e1 100644
--- a/drivers/video/s3c2410fb.c
+++ b/drivers/video/fbdev/s3c2410fb.c
diff --git a/drivers/video/s3c2410fb.h b/drivers/video/fbdev/s3c2410fb.h
index 47a17bd23011..47a17bd23011 100644
--- a/drivers/video/s3c2410fb.h
+++ b/drivers/video/fbdev/s3c2410fb.h
diff --git a/drivers/video/s3fb.c b/drivers/video/fbdev/s3fb.c
index 9a3f8f1c6aab..9a3f8f1c6aab 100644
--- a/drivers/video/s3fb.c
+++ b/drivers/video/fbdev/s3fb.c
diff --git a/drivers/video/sa1100fb.c b/drivers/video/fbdev/sa1100fb.c
index 580c444ec301..580c444ec301 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/fbdev/sa1100fb.c
diff --git a/drivers/video/sa1100fb.h b/drivers/video/fbdev/sa1100fb.h
index fc5d4292fad6..fc5d4292fad6 100644
--- a/drivers/video/sa1100fb.h
+++ b/drivers/video/fbdev/sa1100fb.h
diff --git a/drivers/video/savage/Makefile b/drivers/video/fbdev/savage/Makefile
index e09770fff8ea..e09770fff8ea 100644
--- a/drivers/video/savage/Makefile
+++ b/drivers/video/fbdev/savage/Makefile
diff --git a/drivers/video/savage/savagefb-i2c.c b/drivers/video/fbdev/savage/savagefb-i2c.c
index 80fa87e2ae2f..80fa87e2ae2f 100644
--- a/drivers/video/savage/savagefb-i2c.c
+++ b/drivers/video/fbdev/savage/savagefb-i2c.c
diff --git a/drivers/video/savage/savagefb.h b/drivers/video/fbdev/savage/savagefb.h
index dcaab9012ca2..dcaab9012ca2 100644
--- a/drivers/video/savage/savagefb.h
+++ b/drivers/video/fbdev/savage/savagefb.h
diff --git a/drivers/video/savage/savagefb_accel.c b/drivers/video/fbdev/savage/savagefb_accel.c
index bfefa6234cf0..bfefa6234cf0 100644
--- a/drivers/video/savage/savagefb_accel.c
+++ b/drivers/video/fbdev/savage/savagefb_accel.c
diff --git a/drivers/video/savage/savagefb_driver.c b/drivers/video/fbdev/savage/savagefb_driver.c
index 4dbf45f3b21a..4dbf45f3b21a 100644
--- a/drivers/video/savage/savagefb_driver.c
+++ b/drivers/video/fbdev/savage/savagefb_driver.c
diff --git a/drivers/video/sbuslib.c b/drivers/video/fbdev/sbuslib.c
index a350209ffbd3..a350209ffbd3 100644
--- a/drivers/video/sbuslib.c
+++ b/drivers/video/fbdev/sbuslib.c
diff --git a/drivers/video/sbuslib.h b/drivers/video/fbdev/sbuslib.h
index 7ba3250236bd..7ba3250236bd 100644
--- a/drivers/video/sbuslib.h
+++ b/drivers/video/fbdev/sbuslib.h
diff --git a/drivers/video/sh7760fb.c b/drivers/video/fbdev/sh7760fb.c
index 1265b25f9f99..1265b25f9f99 100644
--- a/drivers/video/sh7760fb.c
+++ b/drivers/video/fbdev/sh7760fb.c
diff --git a/drivers/video/sh_mipi_dsi.c b/drivers/video/fbdev/sh_mipi_dsi.c
index 8f6e8ff620d4..8f6e8ff620d4 100644
--- a/drivers/video/sh_mipi_dsi.c
+++ b/drivers/video/fbdev/sh_mipi_dsi.c
diff --git a/drivers/video/sh_mobile_hdmi.c b/drivers/video/fbdev/sh_mobile_hdmi.c
index 9a33ee0413fb..9a33ee0413fb 100644
--- a/drivers/video/sh_mobile_hdmi.c
+++ b/drivers/video/fbdev/sh_mobile_hdmi.c
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/fbdev/sh_mobile_lcdcfb.c
index 2bcc84ac18c7..2bcc84ac18c7 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/fbdev/sh_mobile_lcdcfb.c
diff --git a/drivers/video/sh_mobile_lcdcfb.h b/drivers/video/fbdev/sh_mobile_lcdcfb.h
index f839adef1d90..f839adef1d90 100644
--- a/drivers/video/sh_mobile_lcdcfb.h
+++ b/drivers/video/fbdev/sh_mobile_lcdcfb.h
diff --git a/drivers/video/sh_mobile_meram.c b/drivers/video/fbdev/sh_mobile_meram.c
index a297de5cc859..a297de5cc859 100644
--- a/drivers/video/sh_mobile_meram.c
+++ b/drivers/video/fbdev/sh_mobile_meram.c
diff --git a/drivers/video/simplefb.c b/drivers/video/fbdev/simplefb.c
index 210f3a02121a..210f3a02121a 100644
--- a/drivers/video/simplefb.c
+++ b/drivers/video/fbdev/simplefb.c
diff --git a/drivers/video/sis/300vtbl.h b/drivers/video/fbdev/sis/300vtbl.h
index e4b4a2626da4..e4b4a2626da4 100644
--- a/drivers/video/sis/300vtbl.h
+++ b/drivers/video/fbdev/sis/300vtbl.h
diff --git a/drivers/video/sis/310vtbl.h b/drivers/video/fbdev/sis/310vtbl.h
index 54fcbbf4ef63..54fcbbf4ef63 100644
--- a/drivers/video/sis/310vtbl.h
+++ b/drivers/video/fbdev/sis/310vtbl.h
diff --git a/drivers/video/sis/Makefile b/drivers/video/fbdev/sis/Makefile
index f7c0046e5b1d..f7c0046e5b1d 100644
--- a/drivers/video/sis/Makefile
+++ b/drivers/video/fbdev/sis/Makefile
diff --git a/drivers/video/sis/init.c b/drivers/video/fbdev/sis/init.c
index bd40f5ecd901..bd40f5ecd901 100644
--- a/drivers/video/sis/init.c
+++ b/drivers/video/fbdev/sis/init.c
diff --git a/drivers/video/sis/init.h b/drivers/video/fbdev/sis/init.h
index 85d6738b6c64..85d6738b6c64 100644
--- a/drivers/video/sis/init.h
+++ b/drivers/video/fbdev/sis/init.h
diff --git a/drivers/video/sis/init301.c b/drivers/video/fbdev/sis/init301.c
index a89e3cafd5ad..a89e3cafd5ad 100644
--- a/drivers/video/sis/init301.c
+++ b/drivers/video/fbdev/sis/init301.c
diff --git a/drivers/video/sis/init301.h b/drivers/video/fbdev/sis/init301.h
index 2112d6d7feda..2112d6d7feda 100644
--- a/drivers/video/sis/init301.h
+++ b/drivers/video/fbdev/sis/init301.h
diff --git a/drivers/video/sis/initdef.h b/drivers/video/fbdev/sis/initdef.h
index 264b55a5947b..264b55a5947b 100644
--- a/drivers/video/sis/initdef.h
+++ b/drivers/video/fbdev/sis/initdef.h
diff --git a/drivers/video/sis/initextlfb.c b/drivers/video/fbdev/sis/initextlfb.c
index 3ab18f5a3759..3ab18f5a3759 100644
--- a/drivers/video/sis/initextlfb.c
+++ b/drivers/video/fbdev/sis/initextlfb.c
diff --git a/drivers/video/sis/oem300.h b/drivers/video/fbdev/sis/oem300.h
index b73f26840143..b73f26840143 100644
--- a/drivers/video/sis/oem300.h
+++ b/drivers/video/fbdev/sis/oem300.h
diff --git a/drivers/video/sis/oem310.h b/drivers/video/fbdev/sis/oem310.h
index 8fce56e4482c..8fce56e4482c 100644
--- a/drivers/video/sis/oem310.h
+++ b/drivers/video/fbdev/sis/oem310.h
diff --git a/drivers/video/sis/sis.h b/drivers/video/fbdev/sis/sis.h
index 1987f1b7212f..1987f1b7212f 100644
--- a/drivers/video/sis/sis.h
+++ b/drivers/video/fbdev/sis/sis.h
diff --git a/drivers/video/sis/sis_accel.c b/drivers/video/fbdev/sis/sis_accel.c
index ceb434c95c0d..ceb434c95c0d 100644
--- a/drivers/video/sis/sis_accel.c
+++ b/drivers/video/fbdev/sis/sis_accel.c
diff --git a/drivers/video/sis/sis_accel.h b/drivers/video/fbdev/sis/sis_accel.h
index 30e03cdf6b85..30e03cdf6b85 100644
--- a/drivers/video/sis/sis_accel.h
+++ b/drivers/video/fbdev/sis/sis_accel.h
diff --git a/drivers/video/sis/sis_main.c b/drivers/video/fbdev/sis/sis_main.c
index 22ad028bf123..22ad028bf123 100644
--- a/drivers/video/sis/sis_main.c
+++ b/drivers/video/fbdev/sis/sis_main.c
diff --git a/drivers/video/sis/sis_main.h b/drivers/video/fbdev/sis/sis_main.h
index 32e23c209430..32e23c209430 100644
--- a/drivers/video/sis/sis_main.h
+++ b/drivers/video/fbdev/sis/sis_main.h
diff --git a/drivers/video/sis/vgatypes.h b/drivers/video/fbdev/sis/vgatypes.h
index e3f9976cfef0..e3f9976cfef0 100644
--- a/drivers/video/sis/vgatypes.h
+++ b/drivers/video/fbdev/sis/vgatypes.h
diff --git a/drivers/video/sis/vstruct.h b/drivers/video/fbdev/sis/vstruct.h
index ea94d214dcff..ea94d214dcff 100644
--- a/drivers/video/sis/vstruct.h
+++ b/drivers/video/fbdev/sis/vstruct.h
diff --git a/drivers/video/skeletonfb.c b/drivers/video/fbdev/skeletonfb.c
index fefde7c6add7..fefde7c6add7 100644
--- a/drivers/video/skeletonfb.c
+++ b/drivers/video/fbdev/skeletonfb.c
diff --git a/drivers/video/sm501fb.c b/drivers/video/fbdev/sm501fb.c
index 1501979099dc..1501979099dc 100644
--- a/drivers/video/sm501fb.c
+++ b/drivers/video/fbdev/sm501fb.c
diff --git a/drivers/video/smscufx.c b/drivers/video/fbdev/smscufx.c
index d513ed6a49f2..d513ed6a49f2 100644
--- a/drivers/video/smscufx.c
+++ b/drivers/video/fbdev/smscufx.c
diff --git a/drivers/video/ssd1307fb.c b/drivers/video/fbdev/ssd1307fb.c
index f4daa59f0a80..f4daa59f0a80 100644
--- a/drivers/video/ssd1307fb.c
+++ b/drivers/video/fbdev/ssd1307fb.c
diff --git a/drivers/video/sstfb.c b/drivers/video/fbdev/sstfb.c
index f0cb279ef333..f0cb279ef333 100644
--- a/drivers/video/sstfb.c
+++ b/drivers/video/fbdev/sstfb.c
diff --git a/drivers/video/sticore.h b/drivers/video/fbdev/sticore.h
index af1619536ac8..af1619536ac8 100644
--- a/drivers/video/sticore.h
+++ b/drivers/video/fbdev/sticore.h
diff --git a/drivers/video/stifb.c b/drivers/video/fbdev/stifb.c
index cfe8a2f905c5..cfe8a2f905c5 100644
--- a/drivers/video/stifb.c
+++ b/drivers/video/fbdev/stifb.c
diff --git a/drivers/video/sunxvr1000.c b/drivers/video/fbdev/sunxvr1000.c
index 58241b47a96d..58241b47a96d 100644
--- a/drivers/video/sunxvr1000.c
+++ b/drivers/video/fbdev/sunxvr1000.c
diff --git a/drivers/video/sunxvr2500.c b/drivers/video/fbdev/sunxvr2500.c
index 843b6bab0483..843b6bab0483 100644
--- a/drivers/video/sunxvr2500.c
+++ b/drivers/video/fbdev/sunxvr2500.c
diff --git a/drivers/video/sunxvr500.c b/drivers/video/fbdev/sunxvr500.c
index 387350d004df..387350d004df 100644
--- a/drivers/video/sunxvr500.c
+++ b/drivers/video/fbdev/sunxvr500.c
diff --git a/drivers/video/tcx.c b/drivers/video/fbdev/tcx.c
index 7fb2d696fac7..7fb2d696fac7 100644
--- a/drivers/video/tcx.c
+++ b/drivers/video/fbdev/tcx.c
diff --git a/drivers/video/tdfxfb.c b/drivers/video/fbdev/tdfxfb.c
index f761fe375f5b..f761fe375f5b 100644
--- a/drivers/video/tdfxfb.c
+++ b/drivers/video/fbdev/tdfxfb.c
diff --git a/drivers/video/tgafb.c b/drivers/video/fbdev/tgafb.c
index 65ba9921506e..65ba9921506e 100644
--- a/drivers/video/tgafb.c
+++ b/drivers/video/fbdev/tgafb.c
diff --git a/drivers/video/tmiofb.c b/drivers/video/fbdev/tmiofb.c
index 7fb4e321a431..7fb4e321a431 100644
--- a/drivers/video/tmiofb.c
+++ b/drivers/video/fbdev/tmiofb.c
diff --git a/drivers/video/tridentfb.c b/drivers/video/fbdev/tridentfb.c
index 7ed9a227f5ea..7ed9a227f5ea 100644
--- a/drivers/video/tridentfb.c
+++ b/drivers/video/fbdev/tridentfb.c
diff --git a/drivers/video/udlfb.c b/drivers/video/fbdev/udlfb.c
index 77b890e4d296..77b890e4d296 100644
--- a/drivers/video/udlfb.c
+++ b/drivers/video/fbdev/udlfb.c
diff --git a/drivers/video/uvesafb.c b/drivers/video/fbdev/uvesafb.c
index 509d452e8f91..509d452e8f91 100644
--- a/drivers/video/uvesafb.c
+++ b/drivers/video/fbdev/uvesafb.c
diff --git a/drivers/video/valkyriefb.c b/drivers/video/fbdev/valkyriefb.c
index 97cb9bd1d1dd..97cb9bd1d1dd 100644
--- a/drivers/video/valkyriefb.c
+++ b/drivers/video/fbdev/valkyriefb.c
diff --git a/drivers/video/valkyriefb.h b/drivers/video/fbdev/valkyriefb.h
index d787441e5a42..d787441e5a42 100644
--- a/drivers/video/valkyriefb.h
+++ b/drivers/video/fbdev/valkyriefb.h
diff --git a/drivers/video/vermilion/Makefile b/drivers/video/fbdev/vermilion/Makefile
index cc21a656153d..cc21a656153d 100644
--- a/drivers/video/vermilion/Makefile
+++ b/drivers/video/fbdev/vermilion/Makefile
diff --git a/drivers/video/vermilion/cr_pll.c b/drivers/video/fbdev/vermilion/cr_pll.c
index ebc6e6e0dd0f..ebc6e6e0dd0f 100644
--- a/drivers/video/vermilion/cr_pll.c
+++ b/drivers/video/fbdev/vermilion/cr_pll.c
diff --git a/drivers/video/vermilion/vermilion.c b/drivers/video/fbdev/vermilion/vermilion.c
index 048a66640b03..048a66640b03 100644
--- a/drivers/video/vermilion/vermilion.c
+++ b/drivers/video/fbdev/vermilion/vermilion.c
diff --git a/drivers/video/vermilion/vermilion.h b/drivers/video/fbdev/vermilion/vermilion.h
index 43d11ec197fc..43d11ec197fc 100644
--- a/drivers/video/vermilion/vermilion.h
+++ b/drivers/video/fbdev/vermilion/vermilion.h
diff --git a/drivers/video/vesafb.c b/drivers/video/fbdev/vesafb.c
index 6170e7f58640..6170e7f58640 100644
--- a/drivers/video/vesafb.c
+++ b/drivers/video/fbdev/vesafb.c
diff --git a/drivers/video/vfb.c b/drivers/video/fbdev/vfb.c
index 70a897b1e458..70a897b1e458 100644
--- a/drivers/video/vfb.c
+++ b/drivers/video/fbdev/vfb.c
diff --git a/drivers/video/vga16fb.c b/drivers/video/fbdev/vga16fb.c
index 283d335a759f..283d335a759f 100644
--- a/drivers/video/vga16fb.c
+++ b/drivers/video/fbdev/vga16fb.c
diff --git a/drivers/video/via/Makefile b/drivers/video/fbdev/via/Makefile
index 159f26e6adb5..159f26e6adb5 100644
--- a/drivers/video/via/Makefile
+++ b/drivers/video/fbdev/via/Makefile
diff --git a/drivers/video/via/accel.c b/drivers/video/fbdev/via/accel.c
index 4b67b8e6030a..4b67b8e6030a 100644
--- a/drivers/video/via/accel.c
+++ b/drivers/video/fbdev/via/accel.c
diff --git a/drivers/video/via/accel.h b/drivers/video/fbdev/via/accel.h
index 79d5e10cc835..79d5e10cc835 100644
--- a/drivers/video/via/accel.h
+++ b/drivers/video/fbdev/via/accel.h
diff --git a/drivers/video/via/chip.h b/drivers/video/fbdev/via/chip.h
index d32a5076c20f..d32a5076c20f 100644
--- a/drivers/video/via/chip.h
+++ b/drivers/video/fbdev/via/chip.h
diff --git a/drivers/video/via/debug.h b/drivers/video/fbdev/via/debug.h
index 86eacc2017f3..86eacc2017f3 100644
--- a/drivers/video/via/debug.h
+++ b/drivers/video/fbdev/via/debug.h
diff --git a/drivers/video/via/dvi.c b/drivers/video/fbdev/via/dvi.c
index 7789553952d3..7789553952d3 100644
--- a/drivers/video/via/dvi.c
+++ b/drivers/video/fbdev/via/dvi.c
diff --git a/drivers/video/via/dvi.h b/drivers/video/fbdev/via/dvi.h
index 4c6bfba57d11..4c6bfba57d11 100644
--- a/drivers/video/via/dvi.h
+++ b/drivers/video/fbdev/via/dvi.h
diff --git a/drivers/video/via/global.c b/drivers/video/fbdev/via/global.c
index 3102171c1674..3102171c1674 100644
--- a/drivers/video/via/global.c
+++ b/drivers/video/fbdev/via/global.c
diff --git a/drivers/video/via/global.h b/drivers/video/fbdev/via/global.h
index 275dbbbd6b81..275dbbbd6b81 100644
--- a/drivers/video/via/global.h
+++ b/drivers/video/fbdev/via/global.h
diff --git a/drivers/video/via/hw.c b/drivers/video/fbdev/via/hw.c
index 22450908306c..22450908306c 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/fbdev/via/hw.c
diff --git a/drivers/video/via/hw.h b/drivers/video/fbdev/via/hw.h
index 3be073c58b03..3be073c58b03 100644
--- a/drivers/video/via/hw.h
+++ b/drivers/video/fbdev/via/hw.h
diff --git a/drivers/video/via/ioctl.c b/drivers/video/fbdev/via/ioctl.c
index ea1c51428823..ea1c51428823 100644
--- a/drivers/video/via/ioctl.c
+++ b/drivers/video/fbdev/via/ioctl.c
diff --git a/drivers/video/via/ioctl.h b/drivers/video/fbdev/via/ioctl.h
index 6010d10b59e8..6010d10b59e8 100644
--- a/drivers/video/via/ioctl.h
+++ b/drivers/video/fbdev/via/ioctl.h
diff --git a/drivers/video/via/lcd.c b/drivers/video/fbdev/via/lcd.c
index 5d21ff436ec8..5d21ff436ec8 100644
--- a/drivers/video/via/lcd.c
+++ b/drivers/video/fbdev/via/lcd.c
diff --git a/drivers/video/via/lcd.h b/drivers/video/fbdev/via/lcd.h
index 5c988a063ad5..5c988a063ad5 100644
--- a/drivers/video/via/lcd.h
+++ b/drivers/video/fbdev/via/lcd.h
diff --git a/drivers/video/via/share.h b/drivers/video/fbdev/via/share.h
index 65c65c611e0a..65c65c611e0a 100644
--- a/drivers/video/via/share.h
+++ b/drivers/video/fbdev/via/share.h
diff --git a/drivers/video/via/tblDPASetting.c b/drivers/video/fbdev/via/tblDPASetting.c
index 73bb554e7c1e..73bb554e7c1e 100644
--- a/drivers/video/via/tblDPASetting.c
+++ b/drivers/video/fbdev/via/tblDPASetting.c
diff --git a/drivers/video/via/tblDPASetting.h b/drivers/video/fbdev/via/tblDPASetting.h
index 6db61519cb5d..6db61519cb5d 100644
--- a/drivers/video/via/tblDPASetting.h
+++ b/drivers/video/fbdev/via/tblDPASetting.h
diff --git a/drivers/video/via/via-core.c b/drivers/video/fbdev/via/via-core.c
index 6e274825fb31..6e274825fb31 100644
--- a/drivers/video/via/via-core.c
+++ b/drivers/video/fbdev/via/via-core.c
diff --git a/drivers/video/via/via-gpio.c b/drivers/video/fbdev/via/via-gpio.c
index e408679081ab..e408679081ab 100644
--- a/drivers/video/via/via-gpio.c
+++ b/drivers/video/fbdev/via/via-gpio.c
diff --git a/drivers/video/via/via_aux.c b/drivers/video/fbdev/via/via_aux.c
index 4a0a55cdac3d..4a0a55cdac3d 100644
--- a/drivers/video/via/via_aux.c
+++ b/drivers/video/fbdev/via/via_aux.c
diff --git a/drivers/video/via/via_aux.h b/drivers/video/fbdev/via/via_aux.h
index a8de3f038cea..a8de3f038cea 100644
--- a/drivers/video/via/via_aux.h
+++ b/drivers/video/fbdev/via/via_aux.h
diff --git a/drivers/video/via/via_aux_ch7301.c b/drivers/video/fbdev/via/via_aux_ch7301.c
index 1cbe5037a6b0..1cbe5037a6b0 100644
--- a/drivers/video/via/via_aux_ch7301.c
+++ b/drivers/video/fbdev/via/via_aux_ch7301.c
diff --git a/drivers/video/via/via_aux_edid.c b/drivers/video/fbdev/via/via_aux_edid.c
index 754d4509033f..754d4509033f 100644
--- a/drivers/video/via/via_aux_edid.c
+++ b/drivers/video/fbdev/via/via_aux_edid.c
diff --git a/drivers/video/via/via_aux_sii164.c b/drivers/video/fbdev/via/via_aux_sii164.c
index ca1b35f033b1..ca1b35f033b1 100644
--- a/drivers/video/via/via_aux_sii164.c
+++ b/drivers/video/fbdev/via/via_aux_sii164.c
diff --git a/drivers/video/via/via_aux_vt1621.c b/drivers/video/fbdev/via/via_aux_vt1621.c
index 38eca8479898..38eca8479898 100644
--- a/drivers/video/via/via_aux_vt1621.c
+++ b/drivers/video/fbdev/via/via_aux_vt1621.c
diff --git a/drivers/video/via/via_aux_vt1622.c b/drivers/video/fbdev/via/via_aux_vt1622.c
index 8c79c68ba683..8c79c68ba683 100644
--- a/drivers/video/via/via_aux_vt1622.c
+++ b/drivers/video/fbdev/via/via_aux_vt1622.c
diff --git a/drivers/video/via/via_aux_vt1625.c b/drivers/video/fbdev/via/via_aux_vt1625.c
index 03eb30165d36..03eb30165d36 100644
--- a/drivers/video/via/via_aux_vt1625.c
+++ b/drivers/video/fbdev/via/via_aux_vt1625.c
diff --git a/drivers/video/via/via_aux_vt1631.c b/drivers/video/fbdev/via/via_aux_vt1631.c
index 06e742f1f723..06e742f1f723 100644
--- a/drivers/video/via/via_aux_vt1631.c
+++ b/drivers/video/fbdev/via/via_aux_vt1631.c
diff --git a/drivers/video/via/via_aux_vt1632.c b/drivers/video/fbdev/via/via_aux_vt1632.c
index d24f4cd97401..d24f4cd97401 100644
--- a/drivers/video/via/via_aux_vt1632.c
+++ b/drivers/video/fbdev/via/via_aux_vt1632.c
diff --git a/drivers/video/via/via_aux_vt1636.c b/drivers/video/fbdev/via/via_aux_vt1636.c
index 9e015c101d4d..9e015c101d4d 100644
--- a/drivers/video/via/via_aux_vt1636.c
+++ b/drivers/video/fbdev/via/via_aux_vt1636.c
diff --git a/drivers/video/via/via_clock.c b/drivers/video/fbdev/via/via_clock.c
index db1e39277e32..db1e39277e32 100644
--- a/drivers/video/via/via_clock.c
+++ b/drivers/video/fbdev/via/via_clock.c
diff --git a/drivers/video/via/via_clock.h b/drivers/video/fbdev/via/via_clock.h
index 88714ae0d157..88714ae0d157 100644
--- a/drivers/video/via/via_clock.h
+++ b/drivers/video/fbdev/via/via_clock.h
diff --git a/drivers/video/via/via_i2c.c b/drivers/video/fbdev/via/via_i2c.c
index dd53058bbbb7..dd53058bbbb7 100644
--- a/drivers/video/via/via_i2c.c
+++ b/drivers/video/fbdev/via/via_i2c.c
diff --git a/drivers/video/via/via_modesetting.c b/drivers/video/fbdev/via/via_modesetting.c
index 0b414b09b9b4..0b414b09b9b4 100644
--- a/drivers/video/via/via_modesetting.c
+++ b/drivers/video/fbdev/via/via_modesetting.c
diff --git a/drivers/video/via/via_modesetting.h b/drivers/video/fbdev/via/via_modesetting.h
index f6a6503da3b3..f6a6503da3b3 100644
--- a/drivers/video/via/via_modesetting.h
+++ b/drivers/video/fbdev/via/via_modesetting.h
diff --git a/drivers/video/via/via_utility.c b/drivers/video/fbdev/via/via_utility.c
index 35458a5eadc8..35458a5eadc8 100644
--- a/drivers/video/via/via_utility.c
+++ b/drivers/video/fbdev/via/via_utility.c
diff --git a/drivers/video/via/via_utility.h b/drivers/video/fbdev/via/via_utility.h
index f23be1708c14..f23be1708c14 100644
--- a/drivers/video/via/via_utility.h
+++ b/drivers/video/fbdev/via/via_utility.h
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/fbdev/via/viafbdev.c
index 325c43c6ff97..325c43c6ff97 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/fbdev/via/viafbdev.c
diff --git a/drivers/video/via/viafbdev.h b/drivers/video/fbdev/via/viafbdev.h
index f6b2ddf56e94..f6b2ddf56e94 100644
--- a/drivers/video/via/viafbdev.h
+++ b/drivers/video/fbdev/via/viafbdev.h
diff --git a/drivers/video/via/viamode.c b/drivers/video/fbdev/via/viamode.c
index 0666ab01cf4a..0666ab01cf4a 100644
--- a/drivers/video/via/viamode.c
+++ b/drivers/video/fbdev/via/viamode.c
diff --git a/drivers/video/via/viamode.h b/drivers/video/fbdev/via/viamode.h
index dd19106698e7..dd19106698e7 100644
--- a/drivers/video/via/viamode.h
+++ b/drivers/video/fbdev/via/viamode.h
diff --git a/drivers/video/via/vt1636.c b/drivers/video/fbdev/via/vt1636.c
index ee2903b472cf..ee2903b472cf 100644
--- a/drivers/video/via/vt1636.c
+++ b/drivers/video/fbdev/via/vt1636.c
diff --git a/drivers/video/via/vt1636.h b/drivers/video/fbdev/via/vt1636.h
index 4c1314e57468..4c1314e57468 100644
--- a/drivers/video/via/vt1636.h
+++ b/drivers/video/fbdev/via/vt1636.h
diff --git a/drivers/video/vt8500lcdfb.c b/drivers/video/fbdev/vt8500lcdfb.c
index a8f2b280f796..a8f2b280f796 100644
--- a/drivers/video/vt8500lcdfb.c
+++ b/drivers/video/fbdev/vt8500lcdfb.c
diff --git a/drivers/video/vt8500lcdfb.h b/drivers/video/fbdev/vt8500lcdfb.h
index 36ca3ca09d83..36ca3ca09d83 100644
--- a/drivers/video/vt8500lcdfb.h
+++ b/drivers/video/fbdev/vt8500lcdfb.h
diff --git a/drivers/video/vt8623fb.c b/drivers/video/fbdev/vt8623fb.c
index 5c7cbc6c6236..5c7cbc6c6236 100644
--- a/drivers/video/vt8623fb.c
+++ b/drivers/video/fbdev/vt8623fb.c
diff --git a/drivers/video/w100fb.c b/drivers/video/fbdev/w100fb.c
index 10951c82f6ed..10951c82f6ed 100644
--- a/drivers/video/w100fb.c
+++ b/drivers/video/fbdev/w100fb.c
diff --git a/drivers/video/w100fb.h b/drivers/video/fbdev/w100fb.h
index fffae7b4f6e9..fffae7b4f6e9 100644
--- a/drivers/video/w100fb.h
+++ b/drivers/video/fbdev/w100fb.h
diff --git a/drivers/video/wm8505fb.c b/drivers/video/fbdev/wm8505fb.c
index 537d199612af..537d199612af 100644
--- a/drivers/video/wm8505fb.c
+++ b/drivers/video/fbdev/wm8505fb.c
diff --git a/drivers/video/wm8505fb_regs.h b/drivers/video/fbdev/wm8505fb_regs.h
index 4dd41668c6d1..4dd41668c6d1 100644
--- a/drivers/video/wm8505fb_regs.h
+++ b/drivers/video/fbdev/wm8505fb_regs.h
diff --git a/drivers/video/wmt_ge_rops.c b/drivers/video/fbdev/wmt_ge_rops.c
index b0a9f34b2e01..9df6fe78a44b 100644
--- a/drivers/video/wmt_ge_rops.c
+++ b/drivers/video/fbdev/wmt_ge_rops.c
@@ -18,7 +18,7 @@
 #include <linux/module.h>
 #include <linux/fb.h>
 #include <linux/platform_device.h>
-#include "fb_draw.h"
+#include "core/fb_draw.h"
 
 #define GE_COMMAND_OFF		0x00
 #define GE_DEPTH_OFF		0x04
diff --git a/drivers/video/wmt_ge_rops.h b/drivers/video/fbdev/wmt_ge_rops.h
index f73ec6377a46..f73ec6377a46 100644
--- a/drivers/video/wmt_ge_rops.h
+++ b/drivers/video/fbdev/wmt_ge_rops.h
diff --git a/drivers/video/xen-fbfront.c b/drivers/video/fbdev/xen-fbfront.c
index 901014bbc821..901014bbc821 100644
--- a/drivers/video/xen-fbfront.c
+++ b/drivers/video/fbdev/xen-fbfront.c
diff --git a/drivers/video/xilinxfb.c b/drivers/video/fbdev/xilinxfb.c
index 553cff2f3f4c..553cff2f3f4c 100644
--- a/drivers/video/xilinxfb.c
+++ b/drivers/video/fbdev/xilinxfb.c
diff --git a/drivers/video/omap2/Kconfig b/drivers/video/omap2/Kconfig
deleted file mode 100644
index 63b23f87081d..000000000000
--- a/drivers/video/omap2/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-config OMAP2_VRFB
-	bool
-
-if ARCH_OMAP2PLUS
-
-source "drivers/video/omap2/dss/Kconfig"
-source "drivers/video/omap2/omapfb/Kconfig"
-source "drivers/video/omap2/displays-new/Kconfig"
-
-endif
diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c
index fc6c94c0b436..32f9236c959f 100644
--- a/drivers/xen/manage.c
+++ b/drivers/xen/manage.c
@@ -198,10 +198,32 @@ struct shutdown_handler {
 	void (*cb)(void);
 };
 
+static int poweroff_nb(struct notifier_block *cb, unsigned long code, void *unused)
+{
+	switch (code) {
+	case SYS_DOWN:
+	case SYS_HALT:
+	case SYS_POWER_OFF:
+		shutting_down = SHUTDOWN_POWEROFF;
+	default:
+		break;
+	}
+	return NOTIFY_DONE;
+}
 static void do_poweroff(void)
 {
-	shutting_down = SHUTDOWN_POWEROFF;
-	orderly_poweroff(false);
+	switch (system_state) {
+	case SYSTEM_BOOTING:
+		orderly_poweroff(true);
+		break;
+	case SYSTEM_RUNNING:
+		orderly_poweroff(false);
+		break;
+	default:
+		/* Don't do it when we are halting/rebooting. */
+		pr_info("Ignoring Xen toolstack shutdown.\n");
+		break;
+	}
 }
 
 static void do_reboot(void)
@@ -307,6 +329,10 @@ static struct xenbus_watch shutdown_watch = {
 	.callback = shutdown_handler
 };
 
+static struct notifier_block xen_reboot_nb = {
+	.notifier_call = poweroff_nb,
+};
+
 static int setup_shutdown_watcher(void)
 {
 	int err;
@@ -317,6 +343,7 @@ static int setup_shutdown_watcher(void)
 		return err;
 	}
 
+
 #ifdef CONFIG_MAGIC_SYSRQ
 	err = register_xenbus_watch(&sysrq_watch);
 	if (err) {
@@ -345,6 +372,7 @@ int xen_setup_shutdown_event(void)
 	if (!xen_domain())
 		return -ENODEV;
 	register_xenstore_notifier(&xenstore_notifier);
+	register_reboot_notifier(&xen_reboot_nb);
 
 	return 0;
 }
diff --git a/drivers/xen/xen-pciback/pciback_ops.c b/drivers/xen/xen-pciback/pciback_ops.c
index 929dd46bb40c..607e41460c0d 100644
--- a/drivers/xen/xen-pciback/pciback_ops.c
+++ b/drivers/xen/xen-pciback/pciback_ops.c
@@ -217,7 +217,7 @@ int xen_pcibk_enable_msix(struct xen_pcibk_device *pdev,
 	if (result == 0) {
 		for (i = 0; i < op->value; i++) {
 			op->msix_entries[i].entry = entries[i].entry;
-			if (entries[i].vector)
+			if (entries[i].vector) {
 				op->msix_entries[i].vector =
 					xen_pirq_from_irq(entries[i].vector);
 				if (unlikely(verbose_request))
@@ -225,6 +225,7 @@ int xen_pcibk_enable_msix(struct xen_pcibk_device *pdev,
 						"MSI-X[%d]: %d\n",
 						pci_name(dev), i,
 						op->msix_entries[i].vector);
+			}
 		}
 	} else
 		pr_warn_ratelimited("%s: error enabling MSI-X for guest %u: err %d!\n",
diff --git a/drivers/xen/xen-pciback/vpci.c b/drivers/xen/xen-pciback/vpci.c
index 3165ce361b00..51afff96c515 100644
--- a/drivers/xen/xen-pciback/vpci.c
+++ b/drivers/xen/xen-pciback/vpci.c
@@ -137,6 +137,8 @@ unlock:
 	/* Publish this device. */
 	if (!err)
 		err = publish_cb(pdev, 0, 0, PCI_DEVFN(slot, func), devid);
+	else
+		kfree(dev_entry);
 
 out:
 	return err;
diff --git a/drivers/xen/xenbus/xenbus_xs.c b/drivers/xen/xenbus/xenbus_xs.c
index b6d5fff43d16..ba804f3d8278 100644
--- a/drivers/xen/xenbus/xenbus_xs.c
+++ b/drivers/xen/xenbus/xenbus_xs.c
@@ -50,6 +50,7 @@
 #include <xen/xenbus.h>
 #include <xen/xen.h>
 #include "xenbus_comms.h"
+#include "xenbus_probe.h"
 
 struct xs_stored_msg {
 	struct list_head list;
@@ -139,6 +140,29 @@ static int get_error(const char *errorstring)
 	return xsd_errors[i].errnum;
 }
 
+static bool xenbus_ok(void)
+{
+	switch (xen_store_domain_type) {
+	case XS_LOCAL:
+		switch (system_state) {
+		case SYSTEM_POWER_OFF:
+		case SYSTEM_RESTART:
+		case SYSTEM_HALT:
+			return false;
+		default:
+			break;
+		}
+		return true;
+	case XS_PV:
+	case XS_HVM:
+		/* FIXME: Could check that the remote domain is alive,
+		 * but it is normally initial domain. */
+		return true;
+	default:
+		break;
+	}
+	return false;
+}
 static void *read_reply(enum xsd_sockmsg_type *type, unsigned int *len)
 {
 	struct xs_stored_msg *msg;
@@ -148,9 +172,20 @@ static void *read_reply(enum xsd_sockmsg_type *type, unsigned int *len)
 
 	while (list_empty(&xs_state.reply_list)) {
 		spin_unlock(&xs_state.reply_lock);
-		/* XXX FIXME: Avoid synchronous wait for response here. */
-		wait_event(xs_state.reply_waitq,
-			   !list_empty(&xs_state.reply_list));
+		if (xenbus_ok())
+			/* XXX FIXME: Avoid synchronous wait for response here. */
+			wait_event_timeout(xs_state.reply_waitq,
+					   !list_empty(&xs_state.reply_list),
+					   msecs_to_jiffies(500));
+		else {
+			/*
+			 * If we are in the process of being shut-down there is
+			 * no point of trying to contact XenBus - it is either
+			 * killed (xenstored application) or the other domain
+			 * has been killed or is unreachable.
+			 */
+			return ERR_PTR(-EIO);
+		}
 		spin_lock(&xs_state.reply_lock);
 	}
 
@@ -215,6 +250,9 @@ void *xenbus_dev_request_and_reply(struct xsd_sockmsg *msg)
 
 	mutex_unlock(&xs_state.request_mutex);
 
+	if (IS_ERR(ret))
+		return ret;
+
 	if ((msg->type == XS_TRANSACTION_END) ||
 	    ((req_msg.type == XS_TRANSACTION_START) &&
 	     (msg->type == XS_ERROR)))