diff options
Diffstat (limited to 'drivers/tty/serial/imx.c')
| -rw-r--r-- | drivers/tty/serial/imx.c | 30 |
1 files changed, 15 insertions, 15 deletions
diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index d5c689d6217e..e309e8b0aaba 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -132,6 +132,7 @@ #define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */ #define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */ #define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ +#define UFCR_DCEDTE (1<<6) /* DCE/DTE mode select */ #define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ #define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7) #define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ @@ -667,22 +668,11 @@ static void imx_break_ctl(struct uart_port *port, int break_state) static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode) { unsigned int val; - unsigned int ufcr_rfdiv; - - /* set receiver / transmitter trigger level. - * RFDIV is set such way to satisfy requested uartclk value - */ - val = TXTL << 10 | RXTL; - ufcr_rfdiv = (clk_get_rate(sport->clk_per) + sport->port.uartclk / 2) - / sport->port.uartclk; - - if(!ufcr_rfdiv) - ufcr_rfdiv = 1; - - val |= UFCR_RFDIV_REG(ufcr_rfdiv); + /* set receiver / transmitter trigger level */ + val = readl(sport->port.membase + UFCR) & (UFCR_RFDIV | UFCR_DCEDTE); + val |= TXTL << UFCR_TXTL_SHF | RXTL; writel(val, sport->port.membase + UFCR); - return 0; } @@ -754,6 +744,7 @@ static int imx_startup(struct uart_port *port) } } + spin_lock_irqsave(&sport->port.lock, flags); /* * Finally, clear and enable interrupts */ @@ -807,7 +798,6 @@ static int imx_startup(struct uart_port *port) /* * Enable modem status interrupts */ - spin_lock_irqsave(&sport->port.lock,flags); imx_enable_ms(&sport->port); spin_unlock_irqrestore(&sport->port.lock,flags); @@ -837,10 +827,13 @@ static void imx_shutdown(struct uart_port *port) { struct imx_port *sport = (struct imx_port *)port; unsigned long temp; + unsigned long flags; + spin_lock_irqsave(&sport->port.lock, flags); temp = readl(sport->port.membase + UCR2); temp &= ~(UCR2_TXEN); writel(temp, sport->port.membase + UCR2); + spin_unlock_irqrestore(&sport->port.lock, flags); if (USE_IRDA(sport)) { struct imxuart_platform_data *pdata; @@ -869,12 +862,14 @@ static void imx_shutdown(struct uart_port *port) * Disable all interrupts, port and break condition. */ + spin_lock_irqsave(&sport->port.lock, flags); temp = readl(sport->port.membase + UCR1); temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN); if (USE_IRDA(sport)) temp &= ~(UCR1_IREN); writel(temp, sport->port.membase + UCR1); + spin_unlock_irqrestore(&sport->port.lock, flags); } static void @@ -1217,6 +1212,9 @@ imx_console_write(struct console *co, const char *s, unsigned int count) struct imx_port *sport = imx_ports[co->index]; struct imx_port_ucrs old_ucr; unsigned int ucr1; + unsigned long flags; + + spin_lock_irqsave(&sport->port.lock, flags); /* * First, save UCR1/2/3 and then disable interrupts @@ -1242,6 +1240,8 @@ imx_console_write(struct console *co, const char *s, unsigned int count) while (!(readl(sport->port.membase + USR2) & USR2_TXDC)); imx_port_ucrs_restore(&sport->port, &old_ucr); + + spin_unlock_irqrestore(&sport->port.lock, flags); } /* |