diff options
Diffstat (limited to 'drivers/staging/comedi/Kconfig')
| -rw-r--r-- | drivers/staging/comedi/Kconfig | 153 |
1 files changed, 55 insertions, 98 deletions
diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index 3bbe3fd103f3..6cee7855b019 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -6,9 +6,10 @@ config COMEDI Enable support a wide range of data acquisition devices for Linux. +if COMEDI + config COMEDI_DEBUG bool "Comedi debugging" - depends on COMEDI != n ---help--- This is an option for use by developers; most people should say N here. This enables comedi core and driver debugging. @@ -16,7 +17,6 @@ config COMEDI_DEBUG config COMEDI_DEFAULT_BUF_SIZE_KB int "Comedi default initial asynchronous buffer size in KiB" default "2048" - depends on COMEDI != n ---help--- This is the default asynchronous buffer size which is used for commands running in the background in kernel space. This @@ -26,7 +26,6 @@ config COMEDI_DEFAULT_BUF_SIZE_KB config COMEDI_DEFAULT_BUF_MAXSIZE_KB int "Comedi default maximum asynchronous buffer size in KiB" default "20480" - depends on COMEDI != n ---help--- This is the default maximum asynchronous buffer size which can be requested by a userspace program without root privileges. @@ -34,8 +33,7 @@ config COMEDI_DEFAULT_BUF_MAXSIZE_KB channels running at 100 kHz has 2-4 seconds of buffer. menuconfig COMEDI_MISC_DRIVERS - tristate "Comedi misc drivers" - depends on COMEDI + bool "Comedi misc drivers" ---help--- Enable comedi misc drivers to be built @@ -102,8 +100,8 @@ config COMEDI_SKEL endif # COMEDI_MISC_DRIVERS menuconfig COMEDI_ISA_DRIVERS - tristate "Comedi ISA and PC/104 drivers" - depends on COMEDI && ISA + bool "Comedi ISA and PC/104 drivers" + depends on ISA ---help--- Enable comedi ISA and PC/104 drivers to be built @@ -111,7 +109,7 @@ menuconfig COMEDI_ISA_DRIVERS kernel: saying N will just cause the configurator to skip all the questions about ISA and PC/104 comedi drivers. -if COMEDI_ISA_DRIVERS && ISA +if COMEDI_ISA_DRIVERS config COMEDI_ACL7225B tristate "ADlink NuDAQ ACL-7225b and compatibles support" @@ -215,7 +213,6 @@ config COMEDI_PCM3730 config COMEDI_AMPLC_DIO200_ISA tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E" select COMEDI_AMPLC_DIO200 - depends on COMEDI_ISA_DRIVERS ---help--- Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and PC272E ISA DIO boards @@ -447,7 +444,6 @@ config COMEDI_ADQ12B config COMEDI_NI_AT_A2150 tristate "NI AT-A2150 ISA card support" - depends on COMEDI_NI_COMMON depends on VIRT_TO_BUS ---help--- Enable support for National Instruments AT-A2150 cards @@ -457,7 +453,6 @@ config COMEDI_NI_AT_A2150 config COMEDI_NI_AT_AO tristate "NI AT-AO-6/10 EISA card support" - depends on COMEDI_NI_COMMON ---help--- Enable support for National Instruments AT-AO-6/10 cards @@ -466,8 +461,9 @@ config COMEDI_NI_AT_AO config COMEDI_NI_ATMIO tristate "NI AT-MIO E series ISA-PNP card support" - depends on ISAPNP && COMEDI_NI_TIO && COMEDI_NI_COMMON + depends on ISAPNP select COMEDI_8255 + select COMEDI_NI_TIO ---help--- Enable support for National Instruments AT-MIO E series cards National Instruments AT-MIO-16E-1 (ni_atmio), @@ -479,7 +475,7 @@ config COMEDI_NI_ATMIO config COMEDI_NI_ATMIO16D tristate "NI AT-MIO16/AT-MIO16D series ISA-PNP card support" - depends on ISAPNP && COMEDI_NI_COMMON + depends on ISAPNP select COMEDI_8255 ---help--- Enable support for National Instruments AT-MIO16/AT-MIO16D cards. @@ -542,8 +538,8 @@ config COMEDI_POC endif # COMEDI_ISA_DRIVERS menuconfig COMEDI_PCI_DRIVERS - tristate "Comedi PCI drivers" - depends on COMEDI && PCI + bool "Comedi PCI drivers" + depends on PCI ---help--- Enable comedi PCI drivers to be built @@ -551,7 +547,7 @@ menuconfig COMEDI_PCI_DRIVERS kernel: saying N will just cause the configurator to skip all the questions about PCI comedi drivers. -if COMEDI_PCI_DRIVERS && PCI +if COMEDI_PCI_DRIVERS config COMEDI_ADDI_APCI_035 tristate "ADDI-DATA APCI_035 support" @@ -674,7 +670,6 @@ config COMEDI_ADDI_APCI_3XXX config COMEDI_ADL_PCI6208 tristate "ADLink PCI-6208A support" - select COMEDI_8255 ---help--- Enable support for ADLink PCI-6208A cards @@ -691,6 +686,7 @@ config COMEDI_ADL_PCI7230 config COMEDI_ADL_PCI7296 tristate "ADLink PCI-7296 96 ch. digital io board support" + select COMEDI_8255 ---help--- Enable support for ADlink PCI-7296 96 ch. digital io board support @@ -988,7 +984,7 @@ config COMEDI_ME_DAQ config COMEDI_NI_6527 tristate "NI 6527 support" - depends on COMEDI_MITE + select COMEDI_MITE ---help--- Enable support for the National Instruments 6527 PCI card @@ -997,7 +993,7 @@ config COMEDI_NI_6527 config COMEDI_NI_65XX tristate "NI 65xx static dio PCI card support" - depends on COMEDI_MITE + select COMEDI_MITE ---help--- Enable support for National Instruments 65xx static dio boards. Supported devices: National Instruments PCI-6509 (ni_65xx), @@ -1010,7 +1006,7 @@ config COMEDI_NI_65XX config COMEDI_NI_660X tristate "NI 660x counter/timer PCI card support" - depends on COMEDI_NI_TIO && COMEDI_NI_COMMON + select COMEDI_NI_TIOCMD ---help--- Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602, PXI-6602 and PXI-6608. @@ -1020,16 +1016,31 @@ config COMEDI_NI_660X config COMEDI_NI_670X tristate "NI 670x PCI card support" - depends on COMEDI_MITE + select COMEDI_MITE ---help--- Enable support for National Instruments PCI-6703 and PCI-6704 To compile this driver as a module, choose M here: the module will be called ni_670x. +config COMEDI_NI_LABPC + tristate "NI Lab-PC and compatibles ISA and PCI support" + select COMEDI_MITE + select COMEDI_8255 + select COMEDI_FC + depends on VIRT_TO_BUS + ---help--- + Enable support for National Instruments Lab-PC and compatibles + Lab-PC-1200, Lab-PC-1200AI, Lab-PC+ and PCI-1200. + Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has + not yet been added to the driver. + + To compile this driver as a module, choose M here: the module will be + called ni_labpc. + config COMEDI_NI_PCIDIO tristate "NI PCI-DIO32HS, PCI-DIO96, PCI-6533, PCI-6503 support" - depends on COMEDI_MITE + select COMEDI_MITE select COMEDI_8255 ---help--- Enable support for National Instruments PCI-DIO-32HS, PXI-6533, @@ -1043,7 +1054,7 @@ config COMEDI_NI_PCIDIO config COMEDI_NI_PCIMIO tristate "NI PCI-MIO-E series and M series support" - depends on COMEDI_NI_TIO && COMEDI_NI_COMMON + select COMEDI_NI_TIOCMD select COMEDI_8255 select COMEDI_FC ---help--- @@ -1063,7 +1074,6 @@ config COMEDI_NI_PCIMIO config COMEDI_RTD520 tristate "Real Time Devices PCI4520/DM7520 support" - select COMEDI_8255 ---help--- Enable support for Real Time Devices PCI4520/DM7520 @@ -1095,11 +1105,19 @@ config COMEDI_SSV_DNP To compile this driver as a module, choose M here: the module will be called ssv_dnp. +config COMEDI_MITE + tristate + +config COMEDI_NI_TIOCMD + tristate + select COMEDI_NI_TIO + select COMEDI_MITE + endif # COMEDI_PCI_DRIVERS menuconfig COMEDI_PCMCIA_DRIVERS - tristate "Comedi PCMCIA drivers" - depends on COMEDI && (PCMCIA || PCCARD) + bool "Comedi PCMCIA drivers" + depends on PCMCIA ---help--- Enable comedi PCMCIA and PCCARD drivers to be built @@ -1107,7 +1125,7 @@ menuconfig COMEDI_PCMCIA_DRIVERS kernel: saying N will just cause the configurator to skip all the questions about PCMCIA comedi drivers. -if COMEDI_PCMCIA_DRIVERS && PCMCIA +if COMEDI_PCMCIA_DRIVERS config COMEDI_CB_DAS16_CS tristate "CB DAS16 series PCMCIA support" @@ -1130,7 +1148,6 @@ config COMEDI_DAS08_CS config COMEDI_NI_DAQ_700_CS tristate "NI DAQCard-700 PCMCIA support" - depends on COMEDI_NI_COMMON ---help--- Enable support for the National Instruments PCMCIA DAQCard-700 DIO @@ -1139,7 +1156,6 @@ config COMEDI_NI_DAQ_700_CS config COMEDI_NI_DAQ_DIO24_CS tristate "NI DAQ-Card DIO-24 PCMCIA support" - depends on COMEDI_NI_COMMON select COMEDI_8255 ---help--- Enable support for the National Instruments PCMCIA DAQ-Card DIO-24 @@ -1158,7 +1174,7 @@ config COMEDI_NI_LABPC_CS config COMEDI_NI_MIO_CS tristate "NI DAQCard E series PCMCIA support" - depends on COMEDI_NI_TIO && COMEDI_NI_COMMON + select COMEDI_NI_TIO select COMEDI_8255 select COMEDI_FC ---help--- @@ -1181,8 +1197,8 @@ config COMEDI_QUATECH_DAQP_CS endif # COMEDI_PCMCIA_DRIVERS menuconfig COMEDI_USB_DRIVERS - tristate "Comedi USB drivers" - depends on COMEDI && USB + bool "Comedi USB drivers" + depends on USB ---help--- Enable comedi USB drivers to be built @@ -1190,7 +1206,7 @@ menuconfig COMEDI_USB_DRIVERS kernel: saying N will just cause the configurator to skip all the questions about USB comedi drivers. -if COMEDI_USB_DRIVERS && USB +if COMEDI_USB_DRIVERS config COMEDI_DT9812 tristate "DataTranslation DT9812 USB module support" @@ -1237,60 +1253,8 @@ config COMEDI_VMK80XX endif # COMEDI_USB_DRIVERS -menuconfig COMEDI_NI_COMMON - tristate "Comedi National Instruments card support" - depends on COMEDI - ---help--- - Enable comedi support for National Instruments cards. - Modules in this section are used by many comedi NI drivers. - - Note that the answer to this question won't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about National Instruments cards. - -if COMEDI_NI_COMMON - -config COMEDI_MITE - tristate "NI Mite PCI interface chip support" - depends on PCI - ---help--- - Enable support for National Instruments Mite PCI interface chip - - To compile this driver as a module, choose M here: the module will be - called mite. - -config COMEDI_NI_TIO - tristate "NI general purpose counter support" - depends on COMEDI_MITE - ---help--- - Enable support for National Instruments general purpose counters. - This module is not used directly by end-users. Rather, it - is used by other drivers (for example ni_660x and ni_pcimio) - to provide support for NI's general purpose counters. - - To compile this driver as a modules, choose M here: two modules will - be build: ni_tio and ni_tiocmd. - -config COMEDI_NI_LABPC - tristate "NI Lab-PC and compatibles ISA and PCI support" - depends on COMEDI_MITE - select COMEDI_8255 - select COMEDI_FC - depends on VIRT_TO_BUS - ---help--- - Enable support for National Instruments Lab-PC and compatibles - Lab-PC-1200, Lab-PC-1200AI, Lab-PC+ and PCI-1200. - Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has - not yet been added to the driver. - - To compile this driver as a module, choose M here: the module will be - called ni_labpc. - -endif # COMEDI_NI_COMMON - config COMEDI_8255 tristate "Generic 8255 support" - depends on COMEDI ---help--- Enable generic 8255 support. @@ -1305,31 +1269,24 @@ config COMEDI_8255 called 8255. config COMEDI_FC - tristate "Comedi shared functions for low-level driver support" - depends on COMEDI - ---help--- - Enable support for shared functions for low-level drivers. - This module is not used directly by end-users. Rather, it - is used by many other comedi drivers. - - To compile this driver as a module, choose M here: the module will be - called comedi_fc. + tristate config COMEDI_AMPLC_DIO200 tristate - depends on COMEDI select COMEDI_8255 config COMEDI_AMPLC_PC236 tristate - depends on COMEDI select COMEDI_8255 config COMEDI_AMPLC_PC263 tristate - depends on COMEDI config COMEDI_DAS08 tristate - depends on COMEDI select COMEDI_8255 + +config COMEDI_NI_TIO + tristate + +endif # COMEDI |