diff options
Diffstat (limited to 'drivers/scsi/bfa/bfa_defs.h')
| -rw-r--r-- | drivers/scsi/bfa/bfa_defs.h | 61 |
1 files changed, 60 insertions, 1 deletions
diff --git a/drivers/scsi/bfa/bfa_defs.h b/drivers/scsi/bfa/bfa_defs.h index b5a1595cc0a5..0efdf312b42c 100644 --- a/drivers/scsi/bfa/bfa_defs.h +++ b/drivers/scsi/bfa/bfa_defs.h @@ -159,10 +159,13 @@ enum bfa_status { BFA_STATUS_BEACON_ON = 72, /* Port Beacon already on */ BFA_STATUS_ENOFSAVE = 78, /* No saved firmware trace */ BFA_STATUS_IOC_DISABLED = 82, /* IOC is already disabled */ + BFA_STATUS_ERROR_TRL_ENABLED = 87, /* TRL is enabled */ + BFA_STATUS_ERROR_QOS_ENABLED = 88, /* QoS is enabled */ BFA_STATUS_NO_SFP_DEV = 89, /* No SFP device check or replace SFP */ BFA_STATUS_MEMTEST_FAILED = 90, /* Memory test failed contact support */ BFA_STATUS_LEDTEST_OP = 109, /* LED test is operating */ BFA_STATUS_INVALID_MAC = 134, /* Invalid MAC address */ + BFA_STATUS_CMD_NOTSUPP_CNA = 146, /* Command not supported for CNA */ BFA_STATUS_PBC = 154, /* Operation not allowed for pre-boot * configuration */ BFA_STATUS_BAD_FWCFG = 156, /* Bad firmware configuration */ @@ -184,6 +187,17 @@ enum bfa_status { BFA_STATUS_FAA_ACQ_ADDR = 200, /* Acquiring addr */ BFA_STATUS_ERROR_TRUNK_ENABLED = 203, /* Trunk enabled on adapter */ BFA_STATUS_MAX_ENTRY_REACHED = 212, /* MAX entry reached */ + BFA_STATUS_TOPOLOGY_LOOP = 230, /* Topology is set to Loop */ + BFA_STATUS_LOOP_UNSUPP_MEZZ = 231, /* Loop topology is not supported + * on mezz cards */ + BFA_STATUS_INVALID_BW = 233, /* Invalid bandwidth value */ + BFA_STATUS_QOS_BW_INVALID = 234, /* Invalid QOS bandwidth + * configuration */ + BFA_STATUS_DPORT_ENABLED = 235, /* D-port mode is already enabled */ + BFA_STATUS_DPORT_DISABLED = 236, /* D-port mode is already disabled */ + BFA_STATUS_CMD_NOTSUPP_MEZZ = 239, /* Cmd not supported for MEZZ card */ + BFA_STATUS_FRU_NOT_PRESENT = 240, /* fru module not present */ + BFA_STATUS_DPORT_ERR = 245, /* D-port mode is enabled */ BFA_STATUS_MAX_VAL /* Unknown error code */ }; #define bfa_status_t enum bfa_status @@ -249,6 +263,10 @@ struct bfa_adapter_attr_s { u8 is_mezz; u8 trunk_capable; + u8 mfg_day; /* manufacturing day */ + u8 mfg_month; /* manufacturing month */ + u16 mfg_year; /* manufacturing year */ + u16 rsvd; }; /* @@ -499,6 +517,17 @@ struct bfa_ioc_aen_data_s { }; /* + * D-port states + * +*/ +enum bfa_dport_state { + BFA_DPORT_ST_DISABLED = 0, /* D-port is Disabled */ + BFA_DPORT_ST_DISABLING = 1, /* D-port is Disabling */ + BFA_DPORT_ST_ENABLING = 2, /* D-port is Enabling */ + BFA_DPORT_ST_ENABLED = 3, /* D-port is Enabled */ +}; + +/* * ---------------------- mfg definitions ------------ */ @@ -722,7 +751,8 @@ struct bfa_ablk_cfg_pf_s { u8 rsvd[1]; u16 num_qpairs; u16 num_vectors; - u32 bw; + u16 bw_min; + u16 bw_max; }; struct bfa_ablk_cfg_port_s { @@ -889,11 +919,40 @@ struct sfp_diag_ext_s { u8 ext_status_ctl[2]; }; +/* + * Diagnostic: Data Fields -- Address A2h + * General Use Fields: User Writable Table - Features's Control Registers + * Total 32 bytes + */ +struct sfp_usr_eeprom_s { + u8 rsvd1[2]; /* 128-129 */ + u8 ewrap; /* 130 */ + u8 rsvd2[2]; /* */ + u8 owrap; /* 133 */ + u8 rsvd3[2]; /* */ + u8 prbs; /* 136: PRBS 7 generator */ + u8 rsvd4[2]; /* */ + u8 tx_eqz_16; /* 139: TX Equalizer (16xFC) */ + u8 tx_eqz_8; /* 140: TX Equalizer (8xFC) */ + u8 rsvd5[2]; /* */ + u8 rx_emp_16; /* 143: RX Emphasis (16xFC) */ + u8 rx_emp_8; /* 144: RX Emphasis (8xFC) */ + u8 rsvd6[2]; /* */ + u8 tx_eye_adj; /* 147: TX eye Threshold Adjust */ + u8 rsvd7[3]; /* */ + u8 tx_eye_qctl; /* 151: TX eye Quality Control */ + u8 tx_eye_qres; /* 152: TX eye Quality Result */ + u8 rsvd8[2]; /* */ + u8 poh[3]; /* 155-157: Power On Hours */ + u8 rsvd9[2]; /* */ +}; + struct sfp_mem_s { struct sfp_srlid_base_s srlid_base; struct sfp_srlid_ext_s srlid_ext; struct sfp_diag_base_s diag_base; struct sfp_diag_ext_s diag_ext; + struct sfp_usr_eeprom_s usr_eeprom; }; /* |