diff options
Diffstat (limited to 'drivers/scsi/bfa/bfa_core.c')
| -rw-r--r-- | drivers/scsi/bfa/bfa_core.c | 402 |
1 files changed, 402 insertions, 0 deletions
diff --git a/drivers/scsi/bfa/bfa_core.c b/drivers/scsi/bfa/bfa_core.c new file mode 100644 index 000000000000..44e2d1155c51 --- /dev/null +++ b/drivers/scsi/bfa/bfa_core.c @@ -0,0 +1,402 @@ +/* + * Copyright (c) 2005-2009 Brocade Communications Systems, Inc. + * All rights reserved + * www.brocade.com + * + * Linux driver for Brocade Fibre Channel Host Bus Adapter. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License (GPL) Version 2 as + * published by the Free Software Foundation + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <bfa.h> +#include <defs/bfa_defs_pci.h> +#include <cs/bfa_debug.h> +#include <bfa_iocfc.h> + +#define DEF_CFG_NUM_FABRICS 1 +#define DEF_CFG_NUM_LPORTS 256 +#define DEF_CFG_NUM_CQS 4 +#define DEF_CFG_NUM_IOIM_REQS (BFA_IOIM_MAX) +#define DEF_CFG_NUM_TSKIM_REQS 128 +#define DEF_CFG_NUM_FCXP_REQS 64 +#define DEF_CFG_NUM_UF_BUFS 64 +#define DEF_CFG_NUM_RPORTS 1024 +#define DEF_CFG_NUM_ITNIMS (DEF_CFG_NUM_RPORTS) +#define DEF_CFG_NUM_TINS 256 + +#define DEF_CFG_NUM_SGPGS 2048 +#define DEF_CFG_NUM_REQQ_ELEMS 256 +#define DEF_CFG_NUM_RSPQ_ELEMS 64 +#define DEF_CFG_NUM_SBOOT_TGTS 16 +#define DEF_CFG_NUM_SBOOT_LUNS 16 + +/** + * Use this function query the memory requirement of the BFA library. + * This function needs to be called before bfa_attach() to get the + * memory required of the BFA layer for a given driver configuration. + * + * This call will fail, if the cap is out of range compared to pre-defined + * values within the BFA library + * + * @param[in] cfg - pointer to bfa_ioc_cfg_t. Driver layer should indicate + * its configuration in this structure. + * The default values for struct bfa_iocfc_cfg_s can be + * fetched using bfa_cfg_get_default() API. + * + * If cap's boundary check fails, the library will use + * the default bfa_cap_t values (and log a warning msg). + * + * @param[out] meminfo - pointer to bfa_meminfo_t. This content + * indicates the memory type (see bfa_mem_type_t) and + * amount of memory required. + * + * Driver should allocate the memory, populate the + * starting address for each block and provide the same + * structure as input parameter to bfa_attach() call. + * + * @return void + * + * Special Considerations: @note + */ +void +bfa_cfg_get_meminfo(struct bfa_iocfc_cfg_s *cfg, struct bfa_meminfo_s *meminfo) +{ + int i; + u32 km_len = 0, dm_len = 0; + + bfa_assert((cfg != NULL) && (meminfo != NULL)); + + bfa_os_memset((void *)meminfo, 0, sizeof(struct bfa_meminfo_s)); + meminfo->meminfo[BFA_MEM_TYPE_KVA - 1].mem_type = + BFA_MEM_TYPE_KVA; + meminfo->meminfo[BFA_MEM_TYPE_DMA - 1].mem_type = + BFA_MEM_TYPE_DMA; + + bfa_iocfc_meminfo(cfg, &km_len, &dm_len); + + for (i = 0; hal_mods[i]; i++) + hal_mods[i]->meminfo(cfg, &km_len, &dm_len); + + + meminfo->meminfo[BFA_MEM_TYPE_KVA - 1].mem_len = km_len; + meminfo->meminfo[BFA_MEM_TYPE_DMA - 1].mem_len = dm_len; +} + +/** + * Use this function to do attach the driver instance with the BFA + * library. This function will not trigger any HW initialization + * process (which will be done in bfa_init() call) + * + * This call will fail, if the cap is out of range compared to + * pre-defined values within the BFA library + * + * @param[out] bfa Pointer to bfa_t. + * @param[in] bfad Opaque handle back to the driver's IOC structure + * @param[in] cfg Pointer to bfa_ioc_cfg_t. Should be same structure + * that was used in bfa_cfg_get_meminfo(). + * @param[in] meminfo Pointer to bfa_meminfo_t. The driver should + * use the bfa_cfg_get_meminfo() call to + * find the memory blocks required, allocate the + * required memory and provide the starting addresses. + * @param[in] pcidev pointer to struct bfa_pcidev_s + * + * @return + * void + * + * Special Considerations: + * + * @note + * + */ +void +bfa_attach(struct bfa_s *bfa, void *bfad, struct bfa_iocfc_cfg_s *cfg, + struct bfa_meminfo_s *meminfo, struct bfa_pcidev_s *pcidev) +{ + int i; + struct bfa_mem_elem_s *melem; + + bfa->fcs = BFA_FALSE; + + bfa_assert((cfg != NULL) && (meminfo != NULL)); + + /** + * initialize all memory pointers for iterative allocation + */ + for (i = 0; i < BFA_MEM_TYPE_MAX; i++) { + melem = meminfo->meminfo + i; + melem->kva_curp = melem->kva; + melem->dma_curp = melem->dma; + } + + bfa_iocfc_attach(bfa, bfad, cfg, meminfo, pcidev); + + for (i = 0; hal_mods[i]; i++) + hal_mods[i]->attach(bfa, bfad, cfg, meminfo, pcidev); + +} + +/** + * Use this function to delete a BFA IOC. IOC should be stopped (by + * calling bfa_stop()) before this function call. + * + * @param[in] bfa - pointer to bfa_t. + * + * @return + * void + * + * Special Considerations: + * + * @note + */ +void +bfa_detach(struct bfa_s *bfa) +{ + int i; + + for (i = 0; hal_mods[i]; i++) + hal_mods[i]->detach(bfa); + + bfa_iocfc_detach(bfa); +} + + +void +bfa_init_trc(struct bfa_s *bfa, struct bfa_trc_mod_s *trcmod) +{ + bfa->trcmod = trcmod; +} + + +void +bfa_init_log(struct bfa_s *bfa, struct bfa_log_mod_s *logmod) +{ + bfa->logm = logmod; +} + + +void +bfa_init_aen(struct bfa_s *bfa, struct bfa_aen_s *aen) +{ + bfa->aen = aen; +} + +void +bfa_init_plog(struct bfa_s *bfa, struct bfa_plog_s *plog) +{ + bfa->plog = plog; +} + +/** + * Initialize IOC. + * + * This function will return immediately, when the IOC initialization is + * completed, the bfa_cb_init() will be called. + * + * @param[in] bfa instance + * + * @return void + * + * Special Considerations: + * + * @note + * When this function returns, the driver should register the interrupt service + * routine(s) and enable the device interrupts. If this is not done, + * bfa_cb_init() will never get called + */ +void +bfa_init(struct bfa_s *bfa) +{ + bfa_iocfc_init(bfa); +} + +/** + * Use this function initiate the IOC configuration setup. This function + * will return immediately. + * + * @param[in] bfa instance + * + * @return None + */ +void +bfa_start(struct bfa_s *bfa) +{ + bfa_iocfc_start(bfa); +} + +/** + * Use this function quiese the IOC. This function will return immediately, + * when the IOC is actually stopped, the bfa_cb_stop() will be called. + * + * @param[in] bfa - pointer to bfa_t. + * + * @return None + * + * Special Considerations: + * bfa_cb_stop() could be called before or after bfa_stop() returns. + * + * @note + * In case of any failure, we could handle it automatically by doing a + * reset and then succeed the bfa_stop() call. + */ +void +bfa_stop(struct bfa_s *bfa) +{ + bfa_iocfc_stop(bfa); +} + +void +bfa_comp_deq(struct bfa_s *bfa, struct list_head *comp_q) +{ + INIT_LIST_HEAD(comp_q); + list_splice_tail_init(&bfa->comp_q, comp_q); +} + +void +bfa_comp_process(struct bfa_s *bfa, struct list_head *comp_q) +{ + struct list_head *qe; + struct list_head *qen; + struct bfa_cb_qe_s *hcb_qe; + + list_for_each_safe(qe, qen, comp_q) { + hcb_qe = (struct bfa_cb_qe_s *) qe; + hcb_qe->cbfn(hcb_qe->cbarg, BFA_TRUE); + } +} + +void +bfa_comp_free(struct bfa_s *bfa, struct list_head *comp_q) +{ + struct list_head *qe; + struct bfa_cb_qe_s *hcb_qe; + + while (!list_empty(comp_q)) { + bfa_q_deq(comp_q, &qe); + hcb_qe = (struct bfa_cb_qe_s *) qe; + hcb_qe->cbfn(hcb_qe->cbarg, BFA_FALSE); + } +} + +void +bfa_attach_fcs(struct bfa_s *bfa) +{ + bfa->fcs = BFA_TRUE; +} + +/** + * Periodic timer heart beat from driver + */ +void +bfa_timer_tick(struct bfa_s *bfa) +{ + bfa_timer_beat(&bfa->timer_mod); +} + +#ifndef BFA_BIOS_BUILD +/** + * Return the list of PCI vendor/device id lists supported by this + * BFA instance. + */ +void +bfa_get_pciids(struct bfa_pciid_s **pciids, int *npciids) +{ + static struct bfa_pciid_s __pciids[] = { + {BFA_PCI_VENDOR_ID_BROCADE, BFA_PCI_DEVICE_ID_FC_8G2P}, + {BFA_PCI_VENDOR_ID_BROCADE, BFA_PCI_DEVICE_ID_FC_8G1P}, + {BFA_PCI_VENDOR_ID_BROCADE, BFA_PCI_DEVICE_ID_CT}, + }; + + *npciids = sizeof(__pciids) / sizeof(__pciids[0]); + *pciids = __pciids; +} + +/** + * Use this function query the default struct bfa_iocfc_cfg_s value (compiled + * into BFA layer). The OS driver can then turn back and overwrite entries that + * have been configured by the user. + * + * @param[in] cfg - pointer to bfa_ioc_cfg_t + * + * @return + * void + * + * Special Considerations: + * note + */ +void +bfa_cfg_get_default(struct bfa_iocfc_cfg_s *cfg) +{ + cfg->fwcfg.num_fabrics = DEF_CFG_NUM_FABRICS; + cfg->fwcfg.num_lports = DEF_CFG_NUM_LPORTS; + cfg->fwcfg.num_rports = DEF_CFG_NUM_RPORTS; + cfg->fwcfg.num_ioim_reqs = DEF_CFG_NUM_IOIM_REQS; + cfg->fwcfg.num_tskim_reqs = DEF_CFG_NUM_TSKIM_REQS; + cfg->fwcfg.num_fcxp_reqs = DEF_CFG_NUM_FCXP_REQS; + cfg->fwcfg.num_uf_bufs = DEF_CFG_NUM_UF_BUFS; + cfg->fwcfg.num_cqs = DEF_CFG_NUM_CQS; + + cfg->drvcfg.num_reqq_elems = DEF_CFG_NUM_REQQ_ELEMS; + cfg->drvcfg.num_rspq_elems = DEF_CFG_NUM_RSPQ_ELEMS; + cfg->drvcfg.num_sgpgs = DEF_CFG_NUM_SGPGS; + cfg->drvcfg.num_sboot_tgts = DEF_CFG_NUM_SBOOT_TGTS; + cfg->drvcfg.num_sboot_luns = DEF_CFG_NUM_SBOOT_LUNS; + cfg->drvcfg.path_tov = BFA_FCPIM_PATHTOV_DEF; + cfg->drvcfg.ioc_recover = BFA_FALSE; + cfg->drvcfg.delay_comp = BFA_FALSE; + +} + +void +bfa_cfg_get_min(struct bfa_iocfc_cfg_s *cfg) +{ + bfa_cfg_get_default(cfg); + cfg->fwcfg.num_ioim_reqs = BFA_IOIM_MIN; + cfg->fwcfg.num_tskim_reqs = BFA_TSKIM_MIN; + cfg->fwcfg.num_fcxp_reqs = BFA_FCXP_MIN; + cfg->fwcfg.num_uf_bufs = BFA_UF_MIN; + cfg->fwcfg.num_rports = BFA_RPORT_MIN; + + cfg->drvcfg.num_sgpgs = BFA_SGPG_MIN; + cfg->drvcfg.num_reqq_elems = BFA_REQQ_NELEMS_MIN; + cfg->drvcfg.num_rspq_elems = BFA_RSPQ_NELEMS_MIN; + cfg->drvcfg.min_cfg = BFA_TRUE; +} + +void +bfa_get_attr(struct bfa_s *bfa, struct bfa_ioc_attr_s *ioc_attr) +{ + bfa_ioc_get_attr(&bfa->ioc, ioc_attr); +} + +/** + * Retrieve firmware trace information on IOC failure. + */ +bfa_status_t +bfa_debug_fwsave(struct bfa_s *bfa, void *trcdata, int *trclen) +{ + return bfa_ioc_debug_fwsave(&bfa->ioc, trcdata, trclen); +} + +/** + * Fetch firmware trace data. + * + * @param[in] bfa BFA instance + * @param[out] trcdata Firmware trace buffer + * @param[in,out] trclen Firmware trace buffer len + * + * @retval BFA_STATUS_OK Firmware trace is fetched. + * @retval BFA_STATUS_INPROGRESS Firmware trace fetch is in progress. + */ +bfa_status_t +bfa_debug_fwtrc(struct bfa_s *bfa, void *trcdata, int *trclen) +{ + return bfa_ioc_debug_fwtrc(&bfa->ioc, trcdata, trclen); +} +#endif |