summaryrefslogtreecommitdiffstats
path: root/drivers/net/wimax/i2400m/sdio-fw.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/net/wimax/i2400m/sdio-fw.c')
-rw-r--r--drivers/net/wimax/i2400m/sdio-fw.c210
1 files changed, 0 insertions, 210 deletions
diff --git a/drivers/net/wimax/i2400m/sdio-fw.c b/drivers/net/wimax/i2400m/sdio-fw.c
deleted file mode 100644
index 8e025418f5be..000000000000
--- a/drivers/net/wimax/i2400m/sdio-fw.c
+++ /dev/null
@@ -1,210 +0,0 @@
-/*
- * Intel Wireless WiMAX Connection 2400m
- * Firmware uploader's SDIO specifics
- *
- *
- * Copyright (C) 2007-2008 Intel Corporation. All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- *
- * Intel Corporation <linux-wimax@intel.com>
- * Yanir Lubetkin <yanirx.lubetkin@intel.com>
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- * - Initial implementation
- *
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- * - Bus generic/specific split for USB
- *
- * Dirk Brandewie <dirk.j.brandewie@intel.com>
- * - Initial implementation for SDIO
- *
- * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
- * - SDIO rehash for changes in the bus-driver model
- *
- * Dirk Brandewie <dirk.j.brandewie@intel.com>
- * - Make it IRQ based, not polling
- *
- * THE PROCEDURE
- *
- * See fw.c for the generic description of this procedure.
- *
- * This file implements only the SDIO specifics. It boils down to how
- * to send a command and waiting for an acknowledgement from the
- * device.
- *
- * All this code is sequential -- all i2400ms_bus_bm_*() functions are
- * executed in the same thread, except i2400ms_bm_irq() [on its own by
- * the SDIO driver]. This makes it possible to avoid locking.
- *
- * COMMAND EXECUTION
- *
- * The generic firmware upload code will call i2400m_bus_bm_cmd_send()
- * to send commands.
- *
- * The SDIO devices expects things in 256 byte blocks, so it will pad
- * it, compute the checksum (if needed) and pass it to SDIO.
- *
- * ACK RECEPTION
- *
- * This works in IRQ mode -- the fw loader says when to wait for data
- * and for that it calls i2400ms_bus_bm_wait_for_ack().
- *
- * This checks if there is any data available (RX size > 0); if not,
- * waits for the IRQ handler to notify about it. Once there is data,
- * it is read and passed to the caller. Doing it this way we don't
- * need much coordination/locking, and it makes it much more difficult
- * for an interrupt to be lost and the wait_for_ack() function getting
- * stuck even when data is pending.
- */
-#include <linux/mmc/sdio_func.h>
-#include "i2400m-sdio.h"
-
-
-#define D_SUBMODULE fw
-#include "sdio-debug-levels.h"
-
-
-/*
- * Send a boot-mode command to the SDIO function
- *
- * We use a bounce buffer (i2400m->bm_cmd_buf) because we need to
- * touch the header if the RAW flag is not set.
- *
- * @flags: pass thru from i2400m_bm_cmd()
- * @return: cmd_size if ok, < 0 errno code on error.
- *
- * Note the command is padded to the SDIO block size for the device.
- */
-ssize_t i2400ms_bus_bm_cmd_send(struct i2400m *i2400m,
- const struct i2400m_bootrom_header *_cmd,
- size_t cmd_size, int flags)
-{
- ssize_t result;
- struct device *dev = i2400m_dev(i2400m);
- struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m);
- int opcode = _cmd == NULL ? -1 : i2400m_brh_get_opcode(_cmd);
- struct i2400m_bootrom_header *cmd;
- /* SDIO restriction */
- size_t cmd_size_a = ALIGN(cmd_size, I2400MS_BLK_SIZE);
-
- d_fnstart(5, dev, "(i2400m %p cmd %p size %zu)\n",
- i2400m, _cmd, cmd_size);
- result = -E2BIG;
- if (cmd_size > I2400M_BM_CMD_BUF_SIZE)
- goto error_too_big;
-
- if (_cmd != i2400m->bm_cmd_buf)
- memmove(i2400m->bm_cmd_buf, _cmd, cmd_size);
- cmd = i2400m->bm_cmd_buf;
- if (cmd_size_a > cmd_size) /* Zero pad space */
- memset(i2400m->bm_cmd_buf + cmd_size, 0, cmd_size_a - cmd_size);
- if ((flags & I2400M_BM_CMD_RAW) == 0) {
- if (WARN_ON(i2400m_brh_get_response_required(cmd) == 0))
- dev_warn(dev, "SW BUG: response_required == 0\n");
- i2400m_bm_cmd_prepare(cmd);
- }
- d_printf(4, dev, "BM cmd %d: %zu bytes (%zu padded)\n",
- opcode, cmd_size, cmd_size_a);
- d_dump(5, dev, cmd, cmd_size);
-
- sdio_claim_host(i2400ms->func); /* Send & check */
- result = sdio_memcpy_toio(i2400ms->func, I2400MS_DATA_ADDR,
- i2400m->bm_cmd_buf, cmd_size_a);
- sdio_release_host(i2400ms->func);
- if (result < 0) {
- dev_err(dev, "BM cmd %d: cannot send: %ld\n",
- opcode, (long) result);
- goto error_cmd_send;
- }
- result = cmd_size;
-error_cmd_send:
-error_too_big:
- d_fnend(5, dev, "(i2400m %p cmd %p size %zu) = %d\n",
- i2400m, _cmd, cmd_size, (int) result);
- return result;
-}
-
-
-/*
- * Read an ack from the device's boot-mode
- *
- * @i2400m:
- * @_ack: pointer to where to store the read data
- * @ack_size: how many bytes we should read
- *
- * Returns: < 0 errno code on error; otherwise, amount of received bytes.
- *
- * The ACK for a BM command is always at least sizeof(*ack) bytes, so
- * check for that. We don't need to check for device reboots
- *
- */
-ssize_t i2400ms_bus_bm_wait_for_ack(struct i2400m *i2400m,
- struct i2400m_bootrom_header *ack,
- size_t ack_size)
-{
- ssize_t result;
- struct i2400ms *i2400ms = container_of(i2400m, struct i2400ms, i2400m);
- struct sdio_func *func = i2400ms->func;
- struct device *dev = &func->dev;
- int size;
-
- BUG_ON(sizeof(*ack) > ack_size);
-
- d_fnstart(5, dev, "(i2400m %p ack %p size %zu)\n",
- i2400m, ack, ack_size);
-
- result = wait_event_timeout(i2400ms->bm_wfa_wq,
- i2400ms->bm_ack_size != -EINPROGRESS,
- 2 * HZ);
- if (result == 0) {
- result = -ETIMEDOUT;
- dev_err(dev, "BM: error waiting for an ack\n");
- goto error_timeout;
- }
-
- spin_lock(&i2400m->rx_lock);
- result = i2400ms->bm_ack_size;
- BUG_ON(result == -EINPROGRESS);
- if (result < 0) /* so we exit when rx_release() is called */
- dev_err(dev, "BM: %s failed: %zd\n", __func__, result);
- else {
- size = min(ack_size, i2400ms->bm_ack_size);
- memcpy(ack, i2400m->bm_ack_buf, size);
- }
- /*
- * Remember always to clear the bm_ack_size to -EINPROGRESS
- * after the RX data is processed
- */
- i2400ms->bm_ack_size = -EINPROGRESS;
- spin_unlock(&i2400m->rx_lock);
-
-error_timeout:
- d_fnend(5, dev, "(i2400m %p ack %p size %zu) = %zd\n",
- i2400m, ack, ack_size, result);
- return result;
-}