diff options
Diffstat (limited to 'drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c')
| -rw-r--r-- | drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c | 200 |
1 files changed, 146 insertions, 54 deletions
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c index ddc6a4d19302..3456d5617143 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ptp.c @@ -26,6 +26,7 @@ *******************************************************************************/ #include "ixgbe.h" #include <linux/export.h> +#include <linux/ptp_classify.h> /* * The 82599 and the X540 do not have true 64bit nanosecond scale @@ -100,9 +101,13 @@ #define NSECS_PER_SEC 1000000000ULL #endif +static struct sock_filter ptp_filter[] = { + PTP_FILTER +}; + /** * ixgbe_ptp_read - read raw cycle counter (to be used by time counter) - * @cc - the cyclecounter structure + * @cc: the cyclecounter structure * * this function reads the cyclecounter registers and is called by the * cyclecounter structure used to construct a ns counter from the @@ -123,8 +128,8 @@ static cycle_t ixgbe_ptp_read(const struct cyclecounter *cc) /** * ixgbe_ptp_adjfreq - * @ptp - the ptp clock structure - * @ppb - parts per billion adjustment from base + * @ptp: the ptp clock structure + * @ppb: parts per billion adjustment from base * * adjust the frequency of the ptp cycle counter by the * indicated ppb from the base frequency. @@ -170,8 +175,8 @@ static int ixgbe_ptp_adjfreq(struct ptp_clock_info *ptp, s32 ppb) /** * ixgbe_ptp_adjtime - * @ptp - the ptp clock structure - * @delta - offset to adjust the cycle counter by + * @ptp: the ptp clock structure + * @delta: offset to adjust the cycle counter by * * adjust the timer by resetting the timecounter structure. */ @@ -198,8 +203,8 @@ static int ixgbe_ptp_adjtime(struct ptp_clock_info *ptp, s64 delta) /** * ixgbe_ptp_gettime - * @ptp - the ptp clock structure - * @ts - timespec structure to hold the current time value + * @ptp: the ptp clock structure + * @ts: timespec structure to hold the current time value * * read the timecounter and return the correct value on ns, * after converting it into a struct timespec. @@ -224,8 +229,8 @@ static int ixgbe_ptp_gettime(struct ptp_clock_info *ptp, struct timespec *ts) /** * ixgbe_ptp_settime - * @ptp - the ptp clock structure - * @ts - the timespec containing the new time for the cycle counter + * @ptp: the ptp clock structure + * @ts: the timespec containing the new time for the cycle counter * * reset the timecounter to use a new base value instead of the kernel * wall timer value. @@ -251,9 +256,9 @@ static int ixgbe_ptp_settime(struct ptp_clock_info *ptp, /** * ixgbe_ptp_enable - * @ptp - the ptp clock structure - * @rq - the requested feature to change - * @on - whether to enable or disable the feature + * @ptp: the ptp clock structure + * @rq: the requested feature to change + * @on: whether to enable or disable the feature * * enable (or disable) ancillary features of the phc subsystem. * our driver only supports the PPS feature on the X540 @@ -289,8 +294,8 @@ static int ixgbe_ptp_enable(struct ptp_clock_info *ptp, /** * ixgbe_ptp_check_pps_event - * @adapter - the private adapter structure - * @eicr - the interrupt cause register value + * @adapter: the private adapter structure + * @eicr: the interrupt cause register value * * This function is called by the interrupt routine when checking for * interrupts. It will check and handle a pps event. @@ -307,20 +312,21 @@ void ixgbe_ptp_check_pps_event(struct ixgbe_adapter *adapter, u32 eicr) !(adapter->flags2 & IXGBE_FLAG2_PTP_PPS_ENABLED)) return; - switch (hw->mac.type) { - case ixgbe_mac_X540: - if (eicr & IXGBE_EICR_TIMESYNC) + if (unlikely(eicr & IXGBE_EICR_TIMESYNC)) { + switch (hw->mac.type) { + case ixgbe_mac_X540: ptp_clock_event(adapter->ptp_clock, &event); - break; - default: - break; + break; + default: + break; + } } } /** * ixgbe_ptp_enable_sdp - * @hw - the hardware private structure - * @shift - the clock shift for calculating nanoseconds + * @hw: the hardware private structure + * @shift: the clock shift for calculating nanoseconds * * this function enables the clock out feature on the sdp0 for the * X540 device. It will create a 1second periodic output that can be @@ -393,7 +399,7 @@ static void ixgbe_ptp_enable_sdp(struct ixgbe_hw *hw, int shift) /** * ixgbe_ptp_disable_sdp - * @hw - the private hardware structure + * @hw: the private hardware structure * * this function disables the auxiliary SDP clock out feature */ @@ -425,6 +431,68 @@ void ixgbe_ptp_overflow_check(struct ixgbe_adapter *adapter) } /** + * ixgbe_ptp_match - determine if this skb matches a ptp packet + * @skb: pointer to the skb + * @hwtstamp: pointer to the hwtstamp_config to check + * + * Determine whether the skb should have been timestamped, assuming the + * hwtstamp was set via the hwtstamp ioctl. Returns non-zero when the packet + * should have a timestamp waiting in the registers, and 0 otherwise. + * + * V1 packets have to check the version type to determine whether they are + * correct. However, we can't directly access the data because it might be + * fragmented in the SKB, in paged memory. In order to work around this, we + * use skb_copy_bits which will properly copy the data whether it is in the + * paged memory fragments or not. We have to copy the IP header as well as the + * message type. + */ +static int ixgbe_ptp_match(struct sk_buff *skb, int rx_filter) +{ + struct iphdr iph; + u8 msgtype; + unsigned int type, offset; + + if (rx_filter == HWTSTAMP_FILTER_NONE) + return 0; + + type = sk_run_filter(skb, ptp_filter); + + if (likely(rx_filter == HWTSTAMP_FILTER_PTP_V2_EVENT)) + return type & PTP_CLASS_V2; + + /* For the remaining cases actually check message type */ + switch (type) { + case PTP_CLASS_V1_IPV4: + skb_copy_bits(skb, OFF_IHL, &iph, sizeof(iph)); + offset = ETH_HLEN + (iph.ihl << 2) + UDP_HLEN + OFF_PTP_CONTROL; + break; + case PTP_CLASS_V1_IPV6: + offset = OFF_PTP6 + OFF_PTP_CONTROL; + break; + default: + /* other cases invalid or handled above */ + return 0; + } + + /* Make sure our buffer is long enough */ + if (skb->len < offset) + return 0; + + skb_copy_bits(skb, offset, &msgtype, sizeof(msgtype)); + + switch (rx_filter) { + case HWTSTAMP_FILTER_PTP_V1_L4_SYNC: + return (msgtype == IXGBE_RXMTRL_V1_SYNC_MSG); + break; + case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ: + return (msgtype == IXGBE_RXMTRL_V1_DELAY_REQ_MSG); + break; + default: + return 0; + } +} + +/** * ixgbe_ptp_tx_hwtstamp - utility function which checks for TX time stamp * @q_vector: structure containing interrupt and ring information * @skb: particular skb to send timestamp with @@ -473,6 +541,7 @@ void ixgbe_ptp_tx_hwtstamp(struct ixgbe_q_vector *q_vector, /** * ixgbe_ptp_rx_hwtstamp - utility function which checks for RX time stamp * @q_vector: structure containing interrupt and ring information + * @rx_desc: the rx descriptor * @skb: particular skb to send timestamp with * * if the timestamp is valid, we convert it into the timecounter ns @@ -480,6 +549,7 @@ void ixgbe_ptp_tx_hwtstamp(struct ixgbe_q_vector *q_vector, * is passed up the network stack */ void ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector, + union ixgbe_adv_rx_desc *rx_desc, struct sk_buff *skb) { struct ixgbe_adapter *adapter; @@ -497,21 +567,33 @@ void ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector, hw = &adapter->hw; tsyncrxctl = IXGBE_READ_REG(hw, IXGBE_TSYNCRXCTL); + + /* Check if we have a valid timestamp and make sure the skb should + * have been timestamped */ + if (likely(!(tsyncrxctl & IXGBE_TSYNCRXCTL_VALID) || + !ixgbe_ptp_match(skb, adapter->rx_hwtstamp_filter))) + return; + + /* + * Always read the registers, in order to clear a possible fault + * because of stagnant RX timestamp values for a packet that never + * reached the queue. + */ regval |= (u64)IXGBE_READ_REG(hw, IXGBE_RXSTMPL); regval |= (u64)IXGBE_READ_REG(hw, IXGBE_RXSTMPH) << 32; /* - * If this bit is set, then the RX registers contain the time stamp. No - * other packet will be time stamped until we read these registers, so - * read the registers to make them available again. Because only one - * packet can be time stamped at a time, we know that the register - * values must belong to this one here and therefore we don't need to - * compare any of the additional attributes stored for it. + * If the timestamp bit is set in the packet's descriptor, we know the + * timestamp belongs to this packet. No other packet can be + * timestamped until the registers for timestamping have been read. + * Therefor only one packet with this bit can be in the queue at a + * time, and the rx timestamp values that were in the registers belong + * to this packet. * * If nothing went wrong, then it should have a skb_shared_tx that we * can turn into a skb_shared_hwtstamps. */ - if (!(tsyncrxctl & IXGBE_TSYNCRXCTL_VALID)) + if (unlikely(!ixgbe_test_staterr(rx_desc, IXGBE_RXDADV_STAT_TS))) return; spin_lock_irqsave(&adapter->tmreg_lock, flags); @@ -539,6 +621,11 @@ void ixgbe_ptp_rx_hwtstamp(struct ixgbe_q_vector *q_vector, * type has to be specified. Matching the kind of event packet is * not supported, with the exception of "all V2 events regardless of * level 2 or 4". + * + * Since hardware always timestamps Path delay packets when timestamping V2 + * packets, regardless of the type specified in the register, only use V2 + * Event mode. This more accurately tells the user what the hardware is going + * to do anyways. */ int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, struct ifreq *ifr, int cmd) @@ -582,41 +669,30 @@ int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, tsync_rx_mtrl = IXGBE_RXMTRL_V1_DELAY_REQ_MSG; is_l4 = true; break; + case HWTSTAMP_FILTER_PTP_V2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: + case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: case HWTSTAMP_FILTER_PTP_V2_SYNC: case HWTSTAMP_FILTER_PTP_V2_L2_SYNC: case HWTSTAMP_FILTER_PTP_V2_L4_SYNC: - tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L2_L4_V2; - tsync_rx_mtrl = IXGBE_RXMTRL_V2_SYNC_MSG; - is_l2 = true; - is_l4 = true; - config.rx_filter = HWTSTAMP_FILTER_SOME; - break; case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ: case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ: case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ: - tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_L2_L4_V2; - tsync_rx_mtrl = IXGBE_RXMTRL_V2_DELAY_REQ_MSG; - is_l2 = true; - is_l4 = true; - config.rx_filter = HWTSTAMP_FILTER_SOME; - break; - case HWTSTAMP_FILTER_PTP_V2_L4_EVENT: - case HWTSTAMP_FILTER_PTP_V2_L2_EVENT: - case HWTSTAMP_FILTER_PTP_V2_EVENT: tsync_rx_ctl |= IXGBE_TSYNCRXCTL_TYPE_EVENT_V2; - config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; is_l2 = true; is_l4 = true; + config.rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT; break; case HWTSTAMP_FILTER_PTP_V1_L4_EVENT: case HWTSTAMP_FILTER_ALL: default: /* - * register RXMTRL must be set, therefore it is not - * possible to time stamp both V1 Sync and Delay_Req messages - * and hardware does not support timestamping all packets - * => return error + * register RXMTRL must be set in order to do V1 packets, + * therefore it is not possible to time stamp both V1 Sync and + * Delay_Req messages and hardware does not support + * timestamping all packets => return error */ + config.rx_filter = HWTSTAMP_FILTER_NONE; return -ERANGE; } @@ -626,6 +702,9 @@ int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, return 0; } + /* Store filter value for later use */ + adapter->rx_hwtstamp_filter = config.rx_filter; + /* define ethertype filter for timestamped packets */ if (is_l2) IXGBE_WRITE_REG(hw, IXGBE_ETQF(3), @@ -690,7 +769,7 @@ int ixgbe_ptp_hwtstamp_ioctl(struct ixgbe_adapter *adapter, /** * ixgbe_ptp_start_cyclecounter - create the cycle counter from hw - * @adapter - pointer to the adapter structure + * @adapter: pointer to the adapter structure * * this function initializes the timecounter and cyclecounter * structures for use in generated a ns counter from the arbitrary @@ -708,6 +787,7 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter) { struct ixgbe_hw *hw = &adapter->hw; u32 incval = 0; + u32 timinca = 0; u32 shift = 0; u32 cycle_speed; unsigned long flags; @@ -730,8 +810,16 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter) break; } - /* Bail if the cycle speed didn't change */ - if (adapter->cycle_speed == cycle_speed) + /* + * grab the current TIMINCA value from the register so that it can be + * double checked. If the register value has been cleared, it must be + * reset to the correct value for generating a cyclecounter. If + * TIMINCA is zero, the SYSTIME registers do not increment at all. + */ + timinca = IXGBE_READ_REG(hw, IXGBE_TIMINCA); + + /* Bail if the cycle speed didn't change and TIMINCA is non-zero */ + if (adapter->cycle_speed == cycle_speed && timinca) return; /* disable the SDP clock out */ @@ -817,7 +905,7 @@ void ixgbe_ptp_start_cyclecounter(struct ixgbe_adapter *adapter) /** * ixgbe_ptp_init - * @adapter - the ixgbe private adapter structure + * @adapter: the ixgbe private adapter structure * * This function performs the required steps for enabling ptp * support. If ptp support has already been loaded it simply calls the @@ -861,6 +949,10 @@ void ixgbe_ptp_init(struct ixgbe_adapter *adapter) return; } + /* initialize the ptp filter */ + if (ptp_filter_init(ptp_filter, ARRAY_SIZE(ptp_filter))) + e_dev_warn("ptp_filter_init failed\n"); + spin_lock_init(&adapter->tmreg_lock); ixgbe_ptp_start_cyclecounter(adapter); |