summaryrefslogtreecommitdiffstats
path: root/drivers/mtd/nand/s3c2410.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/mtd/nand/s3c2410.c')
-rw-r--r--drivers/mtd/nand/s3c2410.c168
1 files changed, 127 insertions, 41 deletions
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index b34a460ab679..556139ed1fdf 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -1,26 +1,10 @@
/* linux/drivers/mtd/nand/s3c2410.c
*
- * Copyright (c) 2004,2005 Simtec Electronics
- * http://www.simtec.co.uk/products/SWLINUX/
+ * Copyright © 2004-2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
- * Samsung S3C2410/S3C240 NAND driver
- *
- * Changelog:
- * 21-Sep-2004 BJD Initial version
- * 23-Sep-2004 BJD Multiple device support
- * 28-Sep-2004 BJD Fixed ECC placement for Hardware mode
- * 12-Oct-2004 BJD Fixed errors in use of platform data
- * 18-Feb-2005 BJD Fix sparse errors
- * 14-Mar-2005 BJD Applied tglx's code reduction patch
- * 02-May-2005 BJD Fixed s3c2440 support
- * 02-May-2005 BJD Reduced hwcontrol decode
- * 20-Jun-2005 BJD Updated s3c2440 support, fixed timing bug
- * 08-Jul-2005 BJD Fix OOPS when no platform data supplied
- * 20-Oct-2005 BJD Fix timing calculation bug
- * 14-Jan-2006 BJD Allow clock to be stopped when idle
- *
- * $Id: s3c2410.c,v 1.23 2006/04/01 18:06:29 bjd Exp $
+ * Samsung S3C2410/S3C2440/S3C2412 NAND driver
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -52,6 +36,7 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/clk.h>
+#include <linux/cpufreq.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -120,8 +105,13 @@ struct s3c2410_nand_info {
int sel_bit;
int mtd_count;
unsigned long save_sel;
+ unsigned long clk_rate;
enum s3c_cpu_type cpu_type;
+
+#ifdef CONFIG_CPU_FREQ
+ struct notifier_block freq_transition;
+#endif
};
/* conversion functions */
@@ -179,17 +169,18 @@ static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max)
/* controller setup */
-static int s3c2410_nand_inithw(struct s3c2410_nand_info *info,
- struct platform_device *pdev)
+static int s3c2410_nand_setrate(struct s3c2410_nand_info *info)
{
- struct s3c2410_platform_nand *plat = to_nand_plat(pdev);
- unsigned long clkrate = clk_get_rate(info->clk);
+ struct s3c2410_platform_nand *plat = info->platform;
int tacls_max = (info->cpu_type == TYPE_S3C2412) ? 8 : 4;
int tacls, twrph0, twrph1;
- unsigned long cfg = 0;
+ unsigned long clkrate = clk_get_rate(info->clk);
+ unsigned long set, cfg, mask;
+ unsigned long flags;
/* calculate the timing information for the controller */
+ info->clk_rate = clkrate;
clkrate /= 1000; /* turn clock into kHz for ease of use */
if (plat != NULL) {
@@ -211,28 +202,69 @@ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info,
dev_info(info->device, "Tacls=%d, %dns Twrph0=%d %dns, Twrph1=%d %dns\n",
tacls, to_ns(tacls, clkrate), twrph0, to_ns(twrph0, clkrate), twrph1, to_ns(twrph1, clkrate));
+ switch (info->cpu_type) {
+ case TYPE_S3C2410:
+ mask = (S3C2410_NFCONF_TACLS(3) |
+ S3C2410_NFCONF_TWRPH0(7) |
+ S3C2410_NFCONF_TWRPH1(7));
+ set = S3C2410_NFCONF_EN;
+ set |= S3C2410_NFCONF_TACLS(tacls - 1);
+ set |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
+ set |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
+ break;
+
+ case TYPE_S3C2440:
+ case TYPE_S3C2412:
+ mask = (S3C2410_NFCONF_TACLS(tacls_max - 1) |
+ S3C2410_NFCONF_TWRPH0(7) |
+ S3C2410_NFCONF_TWRPH1(7));
+
+ set = S3C2440_NFCONF_TACLS(tacls - 1);
+ set |= S3C2440_NFCONF_TWRPH0(twrph0 - 1);
+ set |= S3C2440_NFCONF_TWRPH1(twrph1 - 1);
+ break;
+
+ default:
+ /* keep compiler happy */
+ mask = 0;
+ set = 0;
+ BUG();
+ }
+
+ dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
+
+ local_irq_save(flags);
+
+ cfg = readl(info->regs + S3C2410_NFCONF);
+ cfg &= ~mask;
+ cfg |= set;
+ writel(cfg, info->regs + S3C2410_NFCONF);
+
+ local_irq_restore(flags);
+
+ return 0;
+}
+
+static int s3c2410_nand_inithw(struct s3c2410_nand_info *info)
+{
+ int ret;
+
+ ret = s3c2410_nand_setrate(info);
+ if (ret < 0)
+ return ret;
+
switch (info->cpu_type) {
case TYPE_S3C2410:
- cfg = S3C2410_NFCONF_EN;
- cfg |= S3C2410_NFCONF_TACLS(tacls - 1);
- cfg |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
- cfg |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
+ default:
break;
case TYPE_S3C2440:
case TYPE_S3C2412:
- cfg = S3C2440_NFCONF_TACLS(tacls - 1);
- cfg |= S3C2440_NFCONF_TWRPH0(twrph0 - 1);
- cfg |= S3C2440_NFCONF_TWRPH1(twrph1 - 1);
-
/* enable the controller and de-assert nFCE */
writel(S3C2440_NFCONT_ENABLE, info->regs + S3C2440_NFCONT);
}
- dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
-
- writel(cfg, info->regs + S3C2410_NFCONF);
return 0;
}
@@ -513,6 +545,52 @@ static void s3c2440_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int
writesl(info->regs + S3C2440_NFDATA, buf, len / 4);
}
+/* cpufreq driver support */
+
+#ifdef CONFIG_CPU_FREQ
+
+static int s3c2410_nand_cpufreq_transition(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct s3c2410_nand_info *info;
+ unsigned long newclk;
+
+ info = container_of(nb, struct s3c2410_nand_info, freq_transition);
+ newclk = clk_get_rate(info->clk);
+
+ if ((val == CPUFREQ_POSTCHANGE && newclk < info->clk_rate) ||
+ (val == CPUFREQ_PRECHANGE && newclk > info->clk_rate)) {
+ s3c2410_nand_setrate(info);
+ }
+
+ return 0;
+}
+
+static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
+{
+ info->freq_transition.notifier_call = s3c2410_nand_cpufreq_transition;
+
+ return cpufreq_register_notifier(&info->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
+{
+ cpufreq_unregister_notifier(&info->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
+{
+ return 0;
+}
+
+static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
+{
+}
+#endif
+
/* device management functions */
static int s3c2410_nand_remove(struct platform_device *pdev)
@@ -524,9 +602,10 @@ static int s3c2410_nand_remove(struct platform_device *pdev)
if (info == NULL)
return 0;
- /* first thing we need to do is release all our mtds
- * and their partitions, then go through freeing the
- * resources used
+ s3c2410_nand_cpufreq_deregister(info);
+
+ /* Release all our mtds and their partitions, then go through
+ * freeing the resources used
*/
if (info->mtds != NULL) {
@@ -691,7 +770,8 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
{
struct nand_chip *chip = &nmtd->chip;
- printk("%s: chip %p: %d\n", __func__, chip, chip->page_shift);
+ dev_dbg(info->device, "chip %p => page shift %d\n",
+ chip, chip->page_shift);
if (hardware_ecc) {
/* change the behaviour depending on wether we are using
@@ -784,7 +864,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev,
/* initialise the hardware */
- err = s3c2410_nand_inithw(info, pdev);
+ err = s3c2410_nand_inithw(info);
if (err != 0)
goto exit_error;
@@ -827,6 +907,12 @@ static int s3c24xx_nand_probe(struct platform_device *pdev,
sets++;
}
+ err = s3c2410_nand_cpufreq_register(info);
+ if (err < 0) {
+ dev_err(&pdev->dev, "failed to init cpufreq support\n");
+ goto exit_error;
+ }
+
if (allow_clk_stop(info)) {
dev_info(&pdev->dev, "clock idle support enabled\n");
clk_disable(info->clk);
@@ -874,7 +960,7 @@ static int s3c24xx_nand_resume(struct platform_device *dev)
if (info) {
clk_enable(info->clk);
- s3c2410_nand_inithw(info, dev);
+ s3c2410_nand_inithw(info);
/* Restore the state of the nFCE line. */
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-05-01 05:49:57 +0000