diff options
Diffstat (limited to 'drivers/char')
38 files changed, 1053 insertions, 3663 deletions
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 6aad99ec4e0f..31be3ac2e21b 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -201,19 +201,6 @@ config DIGIEPCA To compile this driver as a module, choose M here: the module will be called epca. -config ESPSERIAL - tristate "Hayes ESP serial port support" - depends on SERIAL_NONSTANDARD && ISA && ISA_DMA_API && BROKEN - help - This is a driver which supports Hayes ESP serial ports. Both single - port cards and multiport cards are supported. Make sure to read - <file:Documentation/hayes-esp.txt>. - - To compile this driver as a module, choose M here: the - module will be called esp. - - If unsure, say N. - config MOXA_INTELLIO tristate "Moxa Intellio support" depends on SERIAL_NONSTANDARD && (ISA || EISA || PCI) @@ -515,7 +502,7 @@ config BRIQ_PANEL config BFIN_OTP tristate "Blackfin On-Chip OTP Memory Support" - depends on BLACKFIN && (BF52x || BF54x) + depends on BLACKFIN && (BF51x || BF52x || BF54x) default y help If you say Y here, you will get support for a character device diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 19a79dd79eee..f957edf7e45d 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -18,7 +18,6 @@ obj-$(CONFIG_CONSOLE_TRANSLATIONS) += consolemap.o consolemap_deftbl.o obj-$(CONFIG_HW_CONSOLE) += vt.o defkeymap.o obj-$(CONFIG_AUDIT) += tty_audit.o obj-$(CONFIG_MAGIC_SYSRQ) += sysrq.o -obj-$(CONFIG_ESPSERIAL) += esp.o obj-$(CONFIG_MVME147_SCC) += generic_serial.o vme_scc.o obj-$(CONFIG_MVME162_SCC) += generic_serial.o vme_scc.o obj-$(CONFIG_BVME6000_SCC) += generic_serial.o vme_scc.o diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index 2fb2e6cc322a..5aa7a586a7ff 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -725,9 +725,14 @@ static struct pci_driver agp_amd64_pci_driver = { int __init agp_amd64_init(void) { int err = 0; + static int done = 0; if (agp_off) return -EINVAL; + + if (done++) + return agp_bridges_found ? 0 : -ENODEV; + err = pci_register_driver(&agp_amd64_pci_driver); if (err < 0) return err; @@ -771,12 +776,8 @@ static void __exit agp_amd64_cleanup(void) pci_unregister_driver(&agp_amd64_pci_driver); } -/* On AMD64 the PCI driver needs to initialize this driver early - for the IOMMU, so it has to be called via a backdoor. */ -#ifndef CONFIG_GART_IOMMU module_init(agp_amd64_init); module_exit(agp_amd64_cleanup); -#endif MODULE_AUTHOR("Dave Jones <davej@redhat.com>, Andi Kleen"); module_param(agp_try_unsupported, bool, 0); diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 3cb56a049e24..30c36ac2cd00 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -36,10 +36,10 @@ #define PCI_DEVICE_ID_INTEL_82965GME_IG 0x2A12 #define PCI_DEVICE_ID_INTEL_82945GME_HB 0x27AC #define PCI_DEVICE_ID_INTEL_82945GME_IG 0x27AE -#define PCI_DEVICE_ID_INTEL_IGDGM_HB 0xA010 -#define PCI_DEVICE_ID_INTEL_IGDGM_IG 0xA011 -#define PCI_DEVICE_ID_INTEL_IGDG_HB 0xA000 -#define PCI_DEVICE_ID_INTEL_IGDG_IG 0xA001 +#define PCI_DEVICE_ID_INTEL_PINEVIEW_M_HB 0xA010 +#define PCI_DEVICE_ID_INTEL_PINEVIEW_M_IG 0xA011 +#define PCI_DEVICE_ID_INTEL_PINEVIEW_HB 0xA000 +#define PCI_DEVICE_ID_INTEL_PINEVIEW_IG 0xA001 #define PCI_DEVICE_ID_INTEL_G33_HB 0x29C0 #define PCI_DEVICE_ID_INTEL_G33_IG 0x29C2 #define PCI_DEVICE_ID_INTEL_Q35_HB 0x29B0 @@ -50,20 +50,20 @@ #define PCI_DEVICE_ID_INTEL_B43_IG 0x2E42 #define PCI_DEVICE_ID_INTEL_GM45_HB 0x2A40 #define PCI_DEVICE_ID_INTEL_GM45_IG 0x2A42 -#define PCI_DEVICE_ID_INTEL_IGD_E_HB 0x2E00 -#define PCI_DEVICE_ID_INTEL_IGD_E_IG 0x2E02 +#define PCI_DEVICE_ID_INTEL_EAGLELAKE_HB 0x2E00 +#define PCI_DEVICE_ID_INTEL_EAGLELAKE_IG 0x2E02 #define PCI_DEVICE_ID_INTEL_Q45_HB 0x2E10 #define PCI_DEVICE_ID_INTEL_Q45_IG 0x2E12 #define PCI_DEVICE_ID_INTEL_G45_HB 0x2E20 #define PCI_DEVICE_ID_INTEL_G45_IG 0x2E22 #define PCI_DEVICE_ID_INTEL_G41_HB 0x2E30 #define PCI_DEVICE_ID_INTEL_G41_IG 0x2E32 -#define PCI_DEVICE_ID_INTEL_IGDNG_D_HB 0x0040 -#define PCI_DEVICE_ID_INTEL_IGDNG_D_IG 0x0042 -#define PCI_DEVICE_ID_INTEL_IGDNG_M_HB 0x0044 -#define PCI_DEVICE_ID_INTEL_IGDNG_MA_HB 0x0062 -#define PCI_DEVICE_ID_INTEL_IGDNG_MC2_HB 0x006a -#define PCI_DEVICE_ID_INTEL_IGDNG_M_IG 0x0046 +#define PCI_DEVICE_ID_INTEL_IRONLAKE_D_HB 0x0040 +#define PCI_DEVICE_ID_INTEL_IRONLAKE_D_IG 0x0042 +#define PCI_DEVICE_ID_INTEL_IRONLAKE_M_HB 0x0044 +#define PCI_DEVICE_ID_INTEL_IRONLAKE_MA_HB 0x0062 +#define PCI_DEVICE_ID_INTEL_IRONLAKE_MC2_HB 0x006a +#define PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG 0x0046 /* cover 915 and 945 variants */ #define IS_I915 (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_E7221_HB || \ @@ -83,22 +83,22 @@ #define IS_G33 (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G33_HB || \ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q35_HB || \ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q33_HB || \ - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDGM_HB || \ - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDG_HB) + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_PINEVIEW_M_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_PINEVIEW_HB) -#define IS_IGD (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDGM_HB || \ - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDG_HB) +#define IS_PINEVIEW (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_PINEVIEW_M_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_PINEVIEW_HB) -#define IS_G4X (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGD_E_HB || \ +#define IS_G4X (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_EAGLELAKE_HB || \ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q45_HB || \ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G45_HB || \ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_GM45_HB || \ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G41_HB || \ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_B43_HB || \ - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_D_HB || \ - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_M_HB || \ - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_MA_HB || \ - agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGDNG_MC2_HB) + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IRONLAKE_D_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IRONLAKE_M_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IRONLAKE_MA_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IRONLAKE_MC2_HB) extern int agp_memory_reserved; @@ -178,6 +178,7 @@ static struct _intel_private { * popup and for the GTT. */ int gtt_entries; /* i830+ */ + int gtt_total_size; union { void __iomem *i9xx_flush_page; void *i8xx_flush_page; @@ -653,7 +654,7 @@ static void intel_i830_init_gtt_entries(void) size = 512; } size += 4; /* add in BIOS popup space */ - } else if (IS_G33 && !IS_IGD) { + } else if (IS_G33 && !IS_PINEVIEW) { /* G33's GTT size defined in gmch_ctrl */ switch (gmch_ctrl & G33_PGETBL_SIZE_MASK) { case G33_PGETBL_SIZE_1M: @@ -669,7 +670,7 @@ static void intel_i830_init_gtt_entries(void) size = 512; } size += 4; - } else if (IS_G4X || IS_IGD) { + } else if (IS_G4X || IS_PINEVIEW) { /* On 4 series hardware, GTT stolen is separate from graphics * stolen, ignore it in stolen gtt entries counting. However, * 4KB of the stolen memory doesn't get mapped to the GTT. @@ -1153,7 +1154,7 @@ static int intel_i915_configure(void) readl(intel_private.registers+I810_PGETBL_CTL); /* PCI Posting. */ if (agp_bridge->driver->needs_scratch_page) { - for (i = intel_private.gtt_entries; i < current_size->num_entries; i++) { + for (i = intel_private.gtt_entries; i < intel_private.gtt_total_size; i++) { writel(agp_bridge->scratch_page, intel_private.gtt+i); } readl(intel_private.gtt+i-1); /* PCI Posting. */ @@ -1308,6 +1309,8 @@ static int intel_i915_create_gatt_table(struct agp_bridge_data *bridge) if (!intel_private.gtt) return -ENOMEM; + intel_private.gtt_total_size = gtt_map_size / 4; + temp &= 0xfff80000; intel_private.registers = ioremap(temp, 128 * 4096); @@ -1352,15 +1355,15 @@ static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size) { switch (agp_bridge->dev->device) { case PCI_DEVICE_ID_INTEL_GM45_HB: - case PCI_DEVICE_ID_INTEL_IGD_E_HB: + case PCI_DEVICE_ID_INTEL_EAGLELAKE_HB: case PCI_DEVICE_ID_INTEL_Q45_HB: case PCI_DEVICE_ID_INTEL_G45_HB: case PCI_DEVICE_ID_INTEL_G41_HB: case PCI_DEVICE_ID_INTEL_B43_HB: - case PCI_DEVICE_ID_INTEL_IGDNG_D_HB: - case PCI_DEVICE_ID_INTEL_IGDNG_M_HB: - case PCI_DEVICE_ID_INTEL_IGDNG_MA_HB: - case PCI_DEVICE_ID_INTEL_IGDNG_MC2_HB: + case PCI_DEVICE_ID_INTEL_IRONLAKE_D_HB: + case PCI_DEVICE_ID_INTEL_IRONLAKE_M_HB: + case PCI_DEVICE_ID_INTEL_IRONLAKE_MA_HB: + case PCI_DEVICE_ID_INTEL_IRONLAKE_MC2_HB: *gtt_offset = *gtt_size = MB(2); break; default: @@ -1395,6 +1398,8 @@ static int intel_i965_create_gatt_table(struct agp_bridge_data *bridge) if (!intel_private.gtt) return -ENOMEM; + intel_private.gtt_total_size = gtt_size / 4; + intel_private.registers = ioremap(temp, 128 * 4096); if (!intel_private.registers) { iounmap(intel_private.gtt); @@ -2340,14 +2345,14 @@ static const struct intel_driver_description { NULL, &intel_g33_driver }, { PCI_DEVICE_ID_INTEL_Q33_HB, PCI_DEVICE_ID_INTEL_Q33_IG, 0, "Q33", NULL, &intel_g33_driver }, - { PCI_DEVICE_ID_INTEL_IGDGM_HB, PCI_DEVICE_ID_INTEL_IGDGM_IG, 0, "IGD", + { PCI_DEVICE_ID_INTEL_PINEVIEW_M_HB, PCI_DEVICE_ID_INTEL_PINEVIEW_M_IG, 0, "Pineview", NULL, &intel_g33_driver }, - { PCI_DEVICE_ID_INTEL_IGDG_HB, PCI_DEVICE_ID_INTEL_IGDG_IG, 0, "IGD", + { PCI_DEVICE_ID_INTEL_PINEVIEW_HB, PCI_DEVICE_ID_INTEL_PINEVIEW_IG, 0, "Pineview", NULL, &intel_g33_driver }, { PCI_DEVICE_ID_INTEL_GM45_HB, PCI_DEVICE_ID_INTEL_GM45_IG, 0, - "Mobile Intel® GM45 Express", NULL, &intel_i965_driver }, - { PCI_DEVICE_ID_INTEL_IGD_E_HB, PCI_DEVICE_ID_INTEL_IGD_E_IG, 0, - "Intel Integrated Graphics Device", NULL, &intel_i965_driver }, + "GM45", NULL, &intel_i965_driver }, + { PCI_DEVICE_ID_INTEL_EAGLELAKE_HB, PCI_DEVICE_ID_INTEL_EAGLELAKE_IG, 0, + "Eaglelake", NULL, &intel_i965_driver }, { PCI_DEVICE_ID_INTEL_Q45_HB, PCI_DEVICE_ID_INTEL_Q45_IG, 0, "Q45/Q43", NULL, &intel_i965_driver }, { PCI_DEVICE_ID_INTEL_G45_HB, PCI_DEVICE_ID_INTEL_G45_IG, 0, @@ -2356,14 +2361,14 @@ static const struct intel_driver_description { "B43", NULL, &intel_i965_driver }, { PCI_DEVICE_ID_INTEL_G41_HB, PCI_DEVICE_ID_INTEL_G41_IG, 0, "G41", NULL, &intel_i965_driver }, - { PCI_DEVICE_ID_INTEL_IGDNG_D_HB, PCI_DEVICE_ID_INTEL_IGDNG_D_IG, 0, - "IGDNG/D", NULL, &intel_i965_driver }, - { PCI_DEVICE_ID_INTEL_IGDNG_M_HB, PCI_DEVICE_ID_INTEL_IGDNG_M_IG, 0, - "IGDNG/M", NULL, &intel_i965_driver }, - { PCI_DEVICE_ID_INTEL_IGDNG_MA_HB, PCI_DEVICE_ID_INTEL_IGDNG_M_IG, 0, - "IGDNG/MA", NULL, &intel_i965_driver }, - { PCI_DEVICE_ID_INTEL_IGDNG_MC2_HB, PCI_DEVICE_ID_INTEL_IGDNG_M_IG, 0, - "IGDNG/MC2", NULL, &intel_i965_driver }, + { PCI_DEVICE_ID_INTEL_IRONLAKE_D_HB, PCI_DEVICE_ID_INTEL_IRONLAKE_D_IG, 0, + "Ironlake/D", NULL, &intel_i965_driver }, + { PCI_DEVICE_ID_INTEL_IRONLAKE_M_HB, PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG, 0, + "Ironlake/M", NULL, &intel_i965_driver }, + { PCI_DEVICE_ID_INTEL_IRONLAKE_MA_HB, PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG, 0, + "Ironlake/MA", NULL, &intel_i965_driver }, + { PCI_DEVICE_ID_INTEL_IRONLAKE_MC2_HB, PCI_DEVICE_ID_INTEL_IRONLAKE_M_IG, 0, + "Ironlake/MC2", NULL, &intel_i965_driver }, { 0, 0, 0, NULL, NULL, NULL } }; @@ -2545,8 +2550,8 @@ static struct pci_device_id agp_intel_pci_table[] = { ID(PCI_DEVICE_ID_INTEL_82945G_HB), ID(PCI_DEVICE_ID_INTEL_82945GM_HB), ID(PCI_DEVICE_ID_INTEL_82945GME_HB), - ID(PCI_DEVICE_ID_INTEL_IGDGM_HB), - ID(PCI_DEVICE_ID_INTEL_IGDG_HB), + ID(PCI_DEVICE_ID_INTEL_PINEVIEW_M_HB), + ID(PCI_DEVICE_ID_INTEL_PINEVIEW_HB), ID(PCI_DEVICE_ID_INTEL_82946GZ_HB), ID(PCI_DEVICE_ID_INTEL_82G35_HB), ID(PCI_DEVICE_ID_INTEL_82965Q_HB), @@ -2557,15 +2562,15 @@ static struct pci_device_id agp_intel_pci_table[] = { ID(PCI_DEVICE_ID_INTEL_Q35_HB), ID(PCI_DEVICE_ID_INTEL_Q33_HB), ID(PCI_DEVICE_ID_INTEL_GM45_HB), - ID(PCI_DEVICE_ID_INTEL_IGD_E_HB), + ID(PCI_DEVICE_ID_INTEL_EAGLELAKE_HB), ID(PCI_DEVICE_ID_INTEL_Q45_HB), ID(PCI_DEVICE_ID_INTEL_G45_HB), ID(PCI_DEVICE_ID_INTEL_G41_HB), ID(PCI_DEVICE_ID_INTEL_B43_HB), - ID(PCI_DEVICE_ID_INTEL_IGDNG_D_HB), - ID(PCI_DEVICE_ID_INTEL_IGDNG_M_HB), - ID(PCI_DEVICE_ID_INTEL_IGDNG_MA_HB), - ID(PCI_DEVICE_ID_INTEL_IGDNG_MC2_HB), + ID(PCI_DEVICE_ID_INTEL_IRONLAKE_D_HB), + ID(PCI_DEVICE_ID_INTEL_IRONLAKE_M_HB), + ID(PCI_DEVICE_ID_INTEL_IRONLAKE_MA_HB), + ID(PCI_DEVICE_ID_INTEL_IRONLAKE_MC2_HB), { } }; diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c index 703959eba45a..d89da4ac061f 100644 --- a/drivers/char/agp/uninorth-agp.c +++ b/drivers/char/agp/uninorth-agp.c @@ -144,16 +144,13 @@ static int uninorth_configure(void) return 0; } -static int uninorth_insert_memory(struct agp_memory *mem, off_t pg_start, - int type) +static int uninorth_insert_memory(struct agp_memory *mem, off_t pg_start, int type) { - int i, j, num_entries; + int i, num_entries; void *temp; + u32 *gp; int mask_type; - temp = agp_bridge->current_size; - num_entries = A_SIZE_32(temp)->num_entries; - if (type != mem->type) return -EINVAL; @@ -163,49 +160,12 @@ static int uninorth_insert_memory(struct agp_memory *mem, off_t pg_start, return -EINVAL; } - if ((pg_start + mem->page_count) > num_entries) - return -EINVAL; - - j = pg_start; - - while (j < (pg_start + mem->page_count)) { - if (agp_bridge->gatt_table[j]) - return -EBUSY; - j++; - } - - for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { - agp_bridge->gatt_table[j] = - cpu_to_le32((page_to_phys(mem->pages[i]) & 0xFFFFF000UL) | 0x1UL); - flush_dcache_range((unsigned long)__va(page_to_phys(mem->pages[i])), - (unsigned long)__va(page_to_phys(mem->pages[i]))+0x1000); - } - (void)in_le32((volatile u32*)&agp_bridge->gatt_table[pg_start]); - mb(); - - uninorth_tlbflush(mem); - return 0; -} - -static int u3_insert_memory(struct agp_memory *mem, off_t pg_start, int type) -{ - int i, num_entries; - void *temp; - u32 *gp; - int mask_type; + if (mem->page_count == 0) + return 0; temp = agp_bridge->current_size; num_entries = A_SIZE_32(temp)->num_entries; - if (type != mem->type) - return -EINVAL; - - mask_type = agp_bridge->driver->agp_type_to_mask_type(agp_bridge, type); - if (mask_type != 0) { - /* We know nothing of memory types */ - return -EINVAL; - } - if ((pg_start + mem->page_count) > num_entries) return -EINVAL; @@ -213,14 +173,18 @@ static int u3_insert_memory(struct agp_memory *mem, off_t pg_start, int type) for (i = 0; i < mem->page_count; ++i) { if (gp[i]) { dev_info(&agp_bridge->dev->dev, - "u3_insert_memory: entry 0x%x occupied (%x)\n", + "uninorth_insert_memory: entry 0x%x occupied (%x)\n", i, gp[i]); return -EBUSY; } } for (i = 0; i < mem->page_count; i++) { - gp[i] = (page_to_phys(mem->pages[i]) >> PAGE_SHIFT) | 0x80000000UL; + if (is_u3) + gp[i] = (page_to_phys(mem->pages[i]) >> PAGE_SHIFT) | 0x80000000UL; + else + gp[i] = cpu_to_le32((page_to_phys(mem->pages[i]) & 0xFFFFF000UL) | + 0x1UL); flush_dcache_range((unsigned long)__va(page_to_phys(mem->pages[i])), (unsigned long)__va(page_to_phys(mem->pages[i]))+0x1000); } @@ -230,14 +194,23 @@ static int u3_insert_memory(struct agp_memory *mem, off_t pg_start, int type) return 0; } -int u3_remove_memory(struct agp_memory *mem, off_t pg_start, int type) +int uninorth_remove_memory(struct agp_memory *mem, off_t pg_start, int type) { size_t i; u32 *gp; + int mask_type; + + if (type != mem->type) + return -EINVAL; - if (type != 0 || mem->type != 0) + mask_type = agp_bridge->driver->agp_type_to_mask_type(agp_bridge, type); + if (mask_type != 0) { /* We know nothing of memory types */ return -EINVAL; + } + + if (mem->page_count == 0) + return 0; gp = (u32 *) &agp_bridge->gatt_table[pg_start]; for (i = 0; i < mem->page_count; ++i) @@ -536,7 +509,7 @@ const struct agp_bridge_driver uninorth_agp_driver = { .create_gatt_table = uninorth_create_gatt_table, .free_gatt_table = uninorth_free_gatt_table, .insert_memory = uninorth_insert_memory, - .remove_memory = agp_generic_remove_memory, + .remove_memory = uninorth_remove_memory, .alloc_by_type = agp_generic_alloc_by_type, .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, @@ -562,8 +535,8 @@ const struct agp_bridge_driver u3_agp_driver = { .agp_enable = uninorth_agp_enable, .create_gatt_table = uninorth_create_gatt_table, .free_gatt_table = uninorth_free_gatt_table, - .insert_memory = u3_insert_memory, - .remove_memory = u3_remove_memory, + .insert_memory = uninorth_insert_memory, + .remove_memory = uninorth_remove_memory, .alloc_by_type = agp_generic_alloc_by_type, .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, diff --git a/drivers/char/bfin_jtag_comm.c b/drivers/char/bfin_jtag_comm.c index 1d7c34c73b20..2628c7415ea8 100644 --- a/drivers/char/bfin_jtag_comm.c +++ b/drivers/char/bfin_jtag_comm.c @@ -226,7 +226,7 @@ bfin_jc_wait_until_sent(struct tty_struct *tty, int timeout) } } -static struct tty_operations bfin_jc_ops = { +static const struct tty_operations bfin_jc_ops = { .open = bfin_jc_open, .close = bfin_jc_close, .write = bfin_jc_write, diff --git a/drivers/char/efirtc.c b/drivers/char/efirtc.c index 26a47dc88f61..53c524e7b829 100644 --- a/drivers/char/efirtc.c +++ b/drivers/char/efirtc.c @@ -285,6 +285,7 @@ static const struct file_operations efi_rtc_fops = { .unlocked_ioctl = efi_rtc_ioctl, .open = efi_rtc_open, .release = efi_rtc_close, + .llseek = no_llseek, }; static struct miscdevice efi_rtc_dev= { diff --git a/drivers/char/epca.c b/drivers/char/epca.c index dde5134713e2..17b044a71e02 100644 --- a/drivers/char/epca.c +++ b/drivers/char/epca.c @@ -935,7 +935,7 @@ static int info_open(struct tty_struct *tty, struct file *filp) return 0; } -static struct tty_operations info_ops = { +static const struct tty_operations info_ops = { .open = info_open, .ioctl = info_ioctl, }; diff --git a/drivers/char/esp.c b/drivers/char/esp.c deleted file mode 100644 index b19d43cd9542..000000000000 --- a/drivers/char/esp.c +++ /dev/null @@ -1,2533 +0,0 @@ -/* - * esp.c - driver for Hayes ESP serial cards - * - * --- Notices from serial.c, upon which this driver is based --- - * - * Copyright (C) 1991, 1992 Linus Torvalds - * - * Extensively rewritten by Theodore Ts'o, 8/16/92 -- 9/14/92. Now - * much more extensible to support other serial cards based on the - * 16450/16550A UART's. Added support for the AST FourPort and the - * Accent Async board. - * - * set_serial_info fixed to set the flags, custom divisor, and uart - * type fields. Fix suggested by Michael K. Johnson 12/12/92. - * - * 11/95: TIOCMIWAIT, TIOCGICOUNT by Angelo Haritsis <ah@doc.ic.ac.uk> - * - * 03/96: Modularised by Angelo Haritsis <ah@doc.ic.ac.uk> - * - * rs_set_termios fixed to look also for changes of the input - * flags INPCK, BRKINT, PARMRK, IGNPAR and IGNBRK. - * Bernd Anhäupl 05/17/96. - * - * --- End of notices from serial.c --- - * - * Support for the ESP serial card by Andrew J. Robinson - * <arobinso@nyx.net> (Card detection routine taken from a patch - * by Dennis J. Boylan). Patches to allow use with 2.1.x contributed - * by Chris Faylor. - * - * Most recent changes: (Andrew J. Robinson) - * Support for PIO mode. This allows the driver to work properly with - * multiport cards. - * - * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - - * several cleanups, use module_init/module_exit, etc - * - * This module exports the following rs232 io functions: - * - * int espserial_init(void); - */ - -#include <linux/module.h> -#include <linux/errno.h> -#include <linux/signal.h> -#include <linux/sched.h> -#include <linux/interrupt.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial.h> -#include <linux/serialP.h> -#include <linux/serial_reg.h> -#include <linux/major.h> -#include <linux/string.h> -#include <linux/fcntl.h> -#include <linux/ptrace.h> -#include <linux/ioport.h> -#include <linux/mm.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/bitops.h> - -#include <asm/system.h> -#include <linux/io.h> - -#include <asm/dma.h> -#include <linux/slab.h> -#include <linux/uaccess.h> - -#include <linux/hayesesp.h> - -#define NR_PORTS 64 /* maximum number of ports */ -#define NR_PRIMARY 8 /* maximum number of primary ports */ -#define REGION_SIZE 8 /* size of io region to request */ - -/* The following variables can be set by giving module options */ -static int irq[NR_PRIMARY]; /* IRQ for each base port */ -static unsigned int divisor[NR_PRIMARY]; /* custom divisor for each port */ -static unsigned int dma = ESP_DMA_CHANNEL; /* DMA channel */ -static unsigned int rx_trigger = ESP_RX_TRIGGER; -static unsigned int tx_trigger = ESP_TX_TRIGGER; -static unsigned int flow_off = ESP_FLOW_OFF; -static unsigned int flow_on = ESP_FLOW_ON; -static unsigned int rx_timeout = ESP_RX_TMOUT; -static unsigned int pio_threshold = ESP_PIO_THRESHOLD; - -MODULE_LICENSE("GPL"); - -module_param_array(irq, int, NULL, 0); -module_param_array(divisor, uint, NULL, 0); -module_param(dma, uint, 0); -module_param(rx_trigger, uint, 0); -module_param(tx_trigger, uint, 0); -module_param(flow_off, uint, 0); -module_param(flow_on, uint, 0); -module_param(rx_timeout, uint, 0); -module_param(pio_threshold, uint, 0); - -/* END */ - -static char *dma_buffer; -static int dma_bytes; -static struct esp_pio_buffer *free_pio_buf; - -#define DMA_BUFFER_SZ 1024 - -#define WAKEUP_CHARS 1024 - -static char serial_name[] __initdata = "ESP serial driver"; -static char serial_version[] __initdata = "2.2"; - -static struct tty_driver *esp_driver; - -/* - * Serial driver configuration section. Here are the various options: - * - * SERIAL_PARANOIA_CHECK - * Check the magic number for the esp_structure where - * ever possible. - */ - -#undef SERIAL_PARANOIA_CHECK -#define SERIAL_DO_RESTART - -#undef SERIAL_DEBUG_INTR -#undef SERIAL_DEBUG_OPEN -#undef SERIAL_DEBUG_FLOW - -#if defined(MODULE) && defined(SERIAL_DEBUG_MCOUNT) -#define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] refc=%d, serc=%d, ttyc=%d -> %s\n", \ - tty->name, info->port.flags, \ - serial_driver.refcount, \ - info->port.count, tty->count, s) -#else -#define DBG_CNT(s) -#endif - -static struct esp_struct *ports; - -static void change_speed(struct esp_struct *info); -static void rs_wait_until_sent(struct tty_struct *, int); - -/* - * The ESP card has a clock rate of 14.7456 MHz (that is, 2**ESPC_SCALE - * times the normal 1.8432 Mhz clock of most serial boards). - */ -#define BASE_BAUD ((1843200 / 16) * (1 << ESPC_SCALE)) - -/* Standard COM flags (except for COM4, because of the 8514 problem) */ -#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) - -static inline int serial_paranoia_check(struct esp_struct *info, - char *name, const char *routine) -{ -#ifdef SERIAL_PARANOIA_CHECK - static const char badmagic[] = KERN_WARNING - "Warning: bad magic number for serial struct (%s) in %s\n"; - static const char badinfo[] = KERN_WARNING - "Warning: null esp_struct for (%s) in %s\n"; - - if (!info) { - printk(badinfo, name, routine); - return 1; - } - if (info->magic != ESP_MAGIC) { - printk(badmagic, name, routine); - return 1; - } -#endif - return 0; -} - -static inline unsigned int serial_in(struct esp_struct *info, int offset) -{ - return inb(info->io_port + offset); -} - -static inline void serial_out(struct esp_struct *info, int offset, - unsigned char value) -{ - outb(value, info->io_port+offset); -} - -/* - * ------------------------------------------------------------ - * rs_stop() and rs_start() - * - * This routines are called before setting or resetting tty->stopped. - * They enable or disable transmitter interrupts, as necessary. - * ------------------------------------------------------------ - */ -static void rs_stop(struct tty_struct *tty) -{ - struct esp_struct *info = tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_stop")) - return; - - spin_lock_irqsave(&info->lock, flags); - if (info->IER & UART_IER_THRI) { - info->IER &= ~UART_IER_THRI; - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, info->IER); - } - spin_unlock_irqrestore(&info->lock, flags); -} - -static void rs_start(struct tty_struct *tty) -{ - struct esp_struct *info = tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_start")) - return; - - spin_lock_irqsave(&info->lock, flags); - if (info->xmit_cnt && info->xmit_buf && !(info->IER & UART_IER_THRI)) { - info->IER |= UART_IER_THRI; - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, info->IER); - } - spin_unlock_irqrestore(&info->lock, flags); -} - -/* - * ---------------------------------------------------------------------- - * - * Here starts the interrupt handling routines. All of the following - * subroutines are declared as inline and are folded into - * rs_interrupt(). They were separated out for readability's sake. - * - * Note: rs_interrupt() is a "fast" interrupt, which means that it - * runs with interrupts turned off. People who may want to modify - * rs_interrupt() should try to keep the interrupt handler as fast as - * possible. After you are done making modifications, it is not a bad - * idea to do: - * - * gcc -S -DKERNEL -Wall -Wstrict-prototypes -O6 -fomit-frame-pointer serial.c - * - * and look at the resulting assemble code in serial.s. - * - * - Ted Ts'o (tytso@mit.edu), 7-Mar-93 - * ----------------------------------------------------------------------- - */ - -static DEFINE_SPINLOCK(pio_lock); - -static inline struct esp_pio_buffer *get_pio_buffer(void) -{ - struct esp_pio_buffer *buf; - unsigned long flags; - - spin_lock_irqsave(&pio_lock, flags); - if (free_pio_buf) { - buf = free_pio_buf; - free_pio_buf = buf->next; - } else { - buf = kmalloc(sizeof(struct esp_pio_buffer), GFP_ATOMIC); - } - spin_unlock_irqrestore(&pio_lock, flags); - return buf; -} - -static inline void release_pio_buffer(struct esp_pio_buffer *buf) -{ - unsigned long flags; - spin_lock_irqsave(&pio_lock, flags); - buf->next = free_pio_buf; - free_pio_buf = buf; - spin_unlock_irqrestore(&pio_lock, flags); -} - -static inline void receive_chars_pio(struct esp_struct *info, int num_bytes) -{ - struct tty_struct *tty = info->port.tty; - int i; - struct esp_pio_buffer *pio_buf; - struct esp_pio_buffer *err_buf; - unsigned char status_mask; - - pio_buf = get_pio_buffer(); - - if (!pio_buf) - return; - - err_buf = get_pio_buffer(); - - if (!err_buf) { - release_pio_buffer(pio_buf); - return; - } - - status_mask = (info->read_status_mask >> 2) & 0x07; - - for (i = 0; i < num_bytes - 1; i += 2) { - *((unsigned short *)(pio_buf->data + i)) = - inw(info->io_port + UART_ESI_RX); - err_buf->data[i] = serial_in(info, UART_ESI_RWS); - err_buf->data[i + 1] = (err_buf->data[i] >> 3) & status_mask; - err_buf->data[i] &= status_mask; - } - - if (num_bytes & 0x0001) { - pio_buf->data[num_bytes - 1] = serial_in(info, UART_ESI_RX); - err_buf->data[num_bytes - 1] = - (serial_in(info, UART_ESI_RWS) >> 3) & status_mask; - } - - /* make sure everything is still ok since interrupts were enabled */ - tty = info->port.tty; - - if (!tty) { - release_pio_buffer(pio_buf); - release_pio_buffer(err_buf); - info->stat_flags &= ~ESP_STAT_RX_TIMEOUT; - return; - } - - status_mask = (info->ignore_status_mask >> 2) & 0x07; - - for (i = 0; i < num_bytes; i++) { - if (!(err_buf->data[i] & status_mask)) { - int flag = 0; - - if (err_buf->data[i] & 0x04) { - flag = TTY_BREAK; - if (info->port.flags & ASYNC_SAK) - do_SAK(tty); - } else if (err_buf->data[i] & 0x02) - flag = TTY_FRAME; - else if (err_buf->data[i] & 0x01) - flag = TTY_PARITY; - tty_insert_flip_char(tty, pio_buf->data[i], flag); - } - } - - tty_schedule_flip(tty); - - info->stat_flags &= ~ESP_STAT_RX_TIMEOUT; - release_pio_buffer(pio_buf); - release_pio_buffer(err_buf); -} - -static void program_isa_dma(int dma, int dir, unsigned long addr, int len) -{ - unsigned long flags; - - flags = claim_dma_lock(); - disable_dma(dma); - clear_dma_ff(dma); - set_dma_mode(dma, dir); - set_dma_addr(dma, addr); - set_dma_count(dma, len); - enable_dma(dma); - release_dma_lock(flags); -} - -static void receive_chars_dma(struct esp_struct *info, int num_bytes) -{ - info->stat_flags &= ~ESP_STAT_RX_TIMEOUT; - dma_bytes = num_bytes; - info->stat_flags |= ESP_STAT_DMA_RX; - - program_isa_dma(dma, DMA_MODE_READ, isa_virt_to_bus(dma_buffer), - dma_bytes); - serial_out(info, UART_ESI_CMD1, ESI_START_DMA_RX); -} - -static inline void receive_chars_dma_done(struct esp_struct *info, - int status) -{ - struct tty_struct *tty = info->port.tty; - int num_bytes; - unsigned long flags; - - flags = claim_dma_lock(); - disable_dma(dma); - clear_dma_ff(dma); - - info->stat_flags &= ~ESP_STAT_DMA_RX; - num_bytes = dma_bytes - get_dma_residue(dma); - release_dma_lock(flags); - - info->icount.rx += num_bytes; - - if (num_bytes > 0) { - tty_insert_flip_string(tty, dma_buffer, num_bytes - 1); - - status &= (0x1c & info->read_status_mask); - - /* Is the status significant or do we throw the last byte ? */ - if (!(status & info->ignore_status_mask)) { - int statflag = 0; - - if (status & 0x10) { - statflag = TTY_BREAK; - (info->icount.brk)++; - if (info->port.flags & ASYNC_SAK) - do_SAK(tty); - } else if (status & 0x08) { - statflag = TTY_FRAME; - info->icount.frame++; - } else if (status & 0x04) { - statflag = TTY_PARITY; - info->icount.parity++; - } - tty_insert_flip_char(tty, dma_buffer[num_bytes - 1], - statflag); - } - tty_schedule_flip(tty); - } - - if (dma_bytes != num_bytes) { - num_bytes = dma_bytes - num_bytes; - dma_bytes = 0; - receive_chars_dma(info, num_bytes); - } else - dma_bytes = 0; -} - -/* Caller must hold info->lock */ - -static inline void transmit_chars_pio(struct esp_struct *info, - int space_avail) -{ - int i; - struct esp_pio_buffer *pio_buf; - - pio_buf = get_pio_buffer(); - - if (!pio_buf) - return; - - while (space_avail && info->xmit_cnt) { - if (info->xmit_tail + space_avail <= ESP_XMIT_SIZE) { - memcpy(pio_buf->data, - &(info->xmit_buf[info->xmit_tail]), - space_avail); - } else { - i = ESP_XMIT_SIZE - info->xmit_tail; - memcpy(pio_buf->data, - &(info->xmit_buf[info->xmit_tail]), i); - memcpy(&(pio_buf->data[i]), info->xmit_buf, - space_avail - i); - } - - info->xmit_cnt -= space_avail; - info->xmit_tail = (info->xmit_tail + space_avail) & - (ESP_XMIT_SIZE - 1); - - for (i = 0; i < space_avail - 1; i += 2) { - outw(*((unsigned short *)(pio_buf->data + i)), - info->io_port + UART_ESI_TX); - } - - if (space_avail & 0x0001) - serial_out(info, UART_ESI_TX, - pio_buf->data[space_avail - 1]); - - if (info->xmit_cnt) { - serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND); - serial_out(info, UART_ESI_CMD1, ESI_GET_TX_AVAIL); - space_avail = serial_in(info, UART_ESI_STAT1) << 8; - space_avail |= serial_in(info, UART_ESI_STAT2); - - if (space_avail > info->xmit_cnt) - space_avail = info->xmit_cnt; - } - } - - if (info->xmit_cnt < WAKEUP_CHARS) { - if (info->port.tty) - tty_wakeup(info->port.tty); - -#ifdef SERIAL_DEBUG_INTR - printk("THRE..."); -#endif - - if (info->xmit_cnt <= 0) { - info->IER &= ~UART_IER_THRI; - serial_out(info, UART_ESI_CMD1, - ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, info->IER); - } - } - - release_pio_buffer(pio_buf); -} - -/* Caller must hold info->lock */ -static inline void transmit_chars_dma(struct esp_struct *info, int num_bytes) -{ - dma_bytes = num_bytes; - - if (info->xmit_tail + dma_bytes <= ESP_XMIT_SIZE) { - memcpy(dma_buffer, &(info->xmit_buf[info->xmit_tail]), - dma_bytes); - } else { - int i = ESP_XMIT_SIZE - info->xmit_tail; - memcpy(dma_buffer, &(info->xmit_buf[info->xmit_tail]), - i); - memcpy(&(dma_buffer[i]), info->xmit_buf, dma_bytes - i); - } - - info->xmit_cnt -= dma_bytes; - info->xmit_tail = (info->xmit_tail + dma_bytes) & (ESP_XMIT_SIZE - 1); - - if (info->xmit_cnt < WAKEUP_CHARS) { - if (info->port.tty) - tty_wakeup(info->port.tty); - -#ifdef SERIAL_DEBUG_INTR - printk("THRE..."); -#endif - - if (info->xmit_cnt <= 0) { - info->IER &= ~UART_IER_THRI; - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, info->IER); - } - } - - info->stat_flags |= ESP_STAT_DMA_TX; - - program_isa_dma(dma, DMA_MODE_WRITE, isa_virt_to_bus(dma_buffer), - dma_bytes); - serial_out(info, UART_ESI_CMD1, ESI_START_DMA_TX); -} - -static inline void transmit_chars_dma_done(struct esp_struct *info) -{ - int num_bytes; - unsigned long flags; - - flags = claim_dma_lock(); - disable_dma(dma); - clear_dma_ff(dma); - - num_bytes = dma_bytes - get_dma_residue(dma); - info->icount.tx += dma_bytes; - release_dma_lock(flags); - - if (dma_bytes != num_bytes) { - dma_bytes -= num_bytes; - memmove(dma_buffer, dma_buffer + num_bytes, dma_bytes); - - program_isa_dma(dma, DMA_MODE_WRITE, - isa_virt_to_bus(dma_buffer), dma_bytes); - - serial_out(info, UART_ESI_CMD1, ESI_START_DMA_TX); - } else { - dma_bytes = 0; - info->stat_flags &= ~ESP_STAT_DMA_TX; - } -} - -static void check_modem_status(struct esp_struct *info) -{ - int status; - - serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT); - status = serial_in(info, UART_ESI_STAT2); - - if (status & UART_MSR_ANY_DELTA) { - /* update input line counters */ - if (status & UART_MSR_TERI) - info->icount.rng++; - if (status & UART_MSR_DDSR) - info->icount.dsr++; - if (status & UART_MSR_DDCD) - info->icount.dcd++; - if (status & UART_MSR_DCTS) - info->icount.cts++; - wake_up_interruptible(&info->port.delta_msr_wait); - } - - if ((info->port.flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { -#if (defined(SERIAL_DEBUG_OPEN) || defined(SERIAL_DEBUG_INTR)) - printk("ttys%d CD now %s...", info->line, - (status & UART_MSR_DCD) ? "on" : "off"); -#endif - if (status & UART_MSR_DCD) - wake_up_interruptible(&info->port.open_wait); - else { -#ifdef SERIAL_DEBUG_OPEN - printk("scheduling hangup..."); -#endif - tty_hangup(info->port.tty); - } - } -} - -/* - * This is the serial driver's interrupt routine - */ -static irqreturn_t rs_interrupt_single(int irq, void *dev_id) -{ - struct esp_struct *info; - unsigned err_status; - unsigned int scratch; - -#ifdef SERIAL_DEBUG_INTR - printk("rs_interrupt_single(%d)...", irq); -#endif - info = (struct esp_struct *)dev_id; - err_status = 0; - scratch = serial_in(info, UART_ESI_SID); - - spin_lock(&info->lock); - - if (!info->port.tty) { - spin_unlock(&info->lock); - return IRQ_NONE; - } - - if (scratch & 0x04) { /* error */ - serial_out(info, UART_ESI_CMD1, ESI_GET_ERR_STAT); - err_status = serial_in(info, UART_ESI_STAT1); - serial_in(info, UART_ESI_STAT2); - - if (err_status & 0x01) - info->stat_flags |= ESP_STAT_RX_TIMEOUT; - - if (err_status & 0x20) /* UART status */ - check_modem_status(info); - - if (err_status & 0x80) /* Start break */ - wake_up_interruptible(&info->break_wait); - } - - if ((scratch & 0x88) || /* DMA completed or timed out */ - (err_status & 0x1c) /* receive error */) { - if (info->stat_flags & ESP_STAT_DMA_RX) - receive_chars_dma_done(info, err_status); - else if (info->stat_flags & ESP_STAT_DMA_TX) - transmit_chars_dma_done(info); - } - - if (!(info->stat_flags & (ESP_STAT_DMA_RX | ESP_STAT_DMA_TX)) && - ((scratch & 0x01) || (info->stat_flags & ESP_STAT_RX_TIMEOUT)) && - (info->IER & UART_IER_RDI)) { - int num_bytes; - - serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND); - serial_out(info, UART_ESI_CMD1, ESI_GET_RX_AVAIL); - num_bytes = serial_in(info, UART_ESI_STAT1) << 8; - num_bytes |= serial_in(info, UART_ESI_STAT2); - - num_bytes = tty_buffer_request_room(info->port.tty, num_bytes); - - if (num_bytes) { - if (dma_bytes || - (info->stat_flags & ESP_STAT_USE_PIO) || - (num_bytes <= info->config.pio_threshold)) - receive_chars_pio(info, num_bytes); - else - receive_chars_dma(info, num_bytes); - } - } - - if (!(info->stat_flags & (ESP_STAT_DMA_RX | ESP_STAT_DMA_TX)) && - (scratch & 0x02) && (info->IER & UART_IER_THRI)) { - if ((info->xmit_cnt <= 0) || info->port.tty->stopped) { - info->IER &= ~UART_IER_THRI; - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, info->IER); - } else { - int num_bytes; - - serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND); - serial_out(info, UART_ESI_CMD1, ESI_GET_TX_AVAIL); - num_bytes = serial_in(info, UART_ESI_STAT1) << 8; - num_bytes |= serial_in(info, UART_ESI_STAT2); - - if (num_bytes > info->xmit_cnt) - num_bytes = info->xmit_cnt; - - if (num_bytes) { - if (dma_bytes || - (info->stat_flags & ESP_STAT_USE_PIO) || - (num_bytes <= info->config.pio_threshold)) - transmit_chars_pio(info, num_bytes); - else - transmit_chars_dma(info, num_bytes); - } - } - } - - info->last_active = jiffies; - -#ifdef SERIAL_DEBUG_INTR - printk("end.\n"); -#endif - spin_unlock(&info->lock); - return IRQ_HANDLED; -} - -/* - * ------------------------------------------------------------------- - * Here ends the serial interrupt routines. - * ------------------------------------------------------------------- - */ - -/* - * --------------------------------------------------------------- - * Low level utility subroutines for the serial driver: routines to - * figure out the appropriate timeout for an interrupt chain, routines - * to initialize and startup a serial port, and routines to shutdown a - * serial port. Useful stuff like that. - * - * Caller should hold lock - * --------------------------------------------------------------- - */ - -static void esp_basic_init(struct esp_struct *info) -{ - /* put ESPC in enhanced mode */ - serial_out(info, UART_ESI_CMD1, ESI_SET_MODE); - - if (info->stat_flags & ESP_STAT_NEVER_DMA) - serial_out(info, UART_ESI_CMD2, 0x01); - else - serial_out(info, UART_ESI_CMD2, 0x31); - - /* disable interrupts for now */ - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, 0x00); - - /* set interrupt and DMA channel */ - serial_out(info, UART_ESI_CMD1, ESI_SET_IRQ); - - if (info->stat_flags & ESP_STAT_NEVER_DMA) - serial_out(info, UART_ESI_CMD2, 0x01); - else - serial_out(info, UART_ESI_CMD2, (dma << 4) | 0x01); - - serial_out(info, UART_ESI_CMD1, ESI_SET_ENH_IRQ); - - if (info->line % 8) /* secondary port */ - serial_out(info, UART_ESI_CMD2, 0x0d); /* shared */ - else if (info->irq == 9) - serial_out(info, UART_ESI_CMD2, 0x02); - else - serial_out(info, UART_ESI_CMD2, info->irq); - - /* set error status mask (check this) */ - serial_out(info, UART_ESI_CMD1, ESI_SET_ERR_MASK); - - if (info->stat_flags & ESP_STAT_NEVER_DMA) - serial_out(info, UART_ESI_CMD2, 0xa1); - else - serial_out(info, UART_ESI_CMD2, 0xbd); - - serial_out(info, UART_ESI_CMD2, 0x00); - - /* set DMA timeout */ - serial_out(info, UART_ESI_CMD1, ESI_SET_DMA_TMOUT); - serial_out(info, UART_ESI_CMD2, 0xff); - - /* set FIFO trigger levels */ - serial_out(info, UART_ESI_CMD1, ESI_SET_TRIGGER); - serial_out(info, UART_ESI_CMD2, info->config.rx_trigger >> 8); - serial_out(info, UART_ESI_CMD2, info->config.rx_trigger); - serial_out(info, UART_ESI_CMD2, info->config.tx_trigger >> 8); - serial_out(info, UART_ESI_CMD2, info->config.tx_trigger); - - /* Set clock scaling and wait states */ - serial_out(info, UART_ESI_CMD1, ESI_SET_PRESCALAR); - serial_out(info, UART_ESI_CMD2, 0x04 | ESPC_SCALE); - - /* set reinterrupt pacing */ - serial_out(info, UART_ESI_CMD1, ESI_SET_REINTR); - serial_out(info, UART_ESI_CMD2, 0xff); -} - -static int startup(struct esp_struct *info) -{ - unsigned long flags; - int retval = 0; - unsigned int num_chars; - - spin_lock_irqsave(&info->lock, flags); - - if (info->port.flags & ASYNC_INITIALIZED) - goto out; - - if (!info->xmit_buf) { - info->xmit_buf = (unsigned char *)get_zeroed_page(GFP_ATOMIC); - retval = -ENOMEM; - if (!info->xmit_buf) - goto out; - } - -#ifdef SERIAL_DEBUG_OPEN - printk(KERN_DEBUG "starting up ttys%d (irq %d)...", - info->line, info->irq); -#endif - - /* Flush the RX buffer. Using the ESI flush command may cause */ - /* wild interrupts, so read all the data instead. */ - - serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND); - serial_out(info, UART_ESI_CMD1, ESI_GET_RX_AVAIL); - num_chars = serial_in(info, UART_ESI_STAT1) << 8; - num_chars |= serial_in(info, UART_ESI_STAT2); - - while (num_chars > 1) { - inw(info->io_port + UART_ESI_RX); - num_chars -= 2; - } - - if (num_chars) - serial_in(info, UART_ESI_RX); - - /* set receive character timeout */ - serial_out(info, UART_ESI_CMD1, ESI_SET_RX_TIMEOUT); - serial_out(info, UART_ESI_CMD2, info->config.rx_timeout); - - /* clear all flags except the "never DMA" flag */ - info->stat_flags &= ESP_STAT_NEVER_DMA; - - if (info->stat_flags & ESP_STAT_NEVER_DMA) - info->stat_flags |= ESP_STAT_USE_PIO; - - spin_unlock_irqrestore(&info->lock, flags); - - /* - * Allocate the IRQ - */ - - retval = request_irq(info->irq, rs_interrupt_single, IRQF_SHARED, - "esp serial", info); - - if (retval) { - if (capable(CAP_SYS_ADMIN)) { - if (info->port.tty) - set_bit(TTY_IO_ERROR, - &info->port.tty->flags); - retval = 0; - } - goto out_unlocked; - } - - if (!(info->stat_flags & ESP_STAT_USE_PIO) && !dma_buffer) { - dma_buffer = (char *)__get_dma_pages( - GFP_KERNEL, get_order(DMA_BUFFER_SZ)); - - /* use PIO mode if DMA buf/chan cannot be allocated */ - if (!dma_buffer) - info->stat_flags |= ESP_STAT_USE_PIO; - else if (request_dma(dma, "esp serial")) { - free_pages((unsigned long)dma_buffer, - get_order(DMA_BUFFER_SZ)); - dma_buffer = NULL; - info->stat_flags |= ESP_STAT_USE_PIO; - } - - } - - info->MCR = UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2; - - spin_lock_irqsave(&info->lock, flags); - serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); - serial_out(info, UART_ESI_CMD2, UART_MCR); - serial_out(info, UART_ESI_CMD2, info->MCR); - - /* - * Finally, enable interrupts - */ - /* info->IER = UART_IER_MSI | UART_IER_RLSI | UART_IER_RDI; */ - info->IER = UART_IER_RLSI | UART_IER_RDI | UART_IER_DMA_TMOUT | - UART_IER_DMA_TC; - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, info->IER); - - if (info->port.tty) - clear_bit(TTY_IO_ERROR, &info->port.tty->flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - spin_unlock_irqrestore(&info->lock, flags); - - /* - * Set up the tty->alt_speed kludge - */ - if (info->port.tty) { - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - info->port.tty->alt_speed = 57600; - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - info->port.tty->alt_speed = 115200; - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - info->port.tty->alt_speed = 230400; - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - info->port.tty->alt_speed = 460800; - } - - /* - * set the speed of the serial port - */ - change_speed(info); - info->port.flags |= ASYNC_INITIALIZED; - return 0; - -out: - spin_unlock_irqrestore(&info->lock, flags); -out_unlocked: - return retval; -} - -/* - * This routine will shutdown a serial port; interrupts are disabled, and - * DTR is dropped if the hangup on close termio flag is on. - */ -static void shutdown(struct esp_struct *info) -{ - unsigned long flags, f; - - if (!(info->port.flags & ASYNC_INITIALIZED)) - return; - -#ifdef SERIAL_DEBUG_OPEN - printk("Shutting down serial port %d (irq %d)....", info->line, - info->irq); -#endif - - spin_lock_irqsave(&info->lock, flags); - /* - * clear delta_msr_wait queue to avoid mem leaks: we may free the irq - * here so the queue might never be waken up - */ - wake_up_interruptible(&info->port.delta_msr_wait); - wake_up_interruptible(&info->break_wait); - - /* stop a DMA transfer on the port being closed */ - /* DMA lock is higher priority always */ - if (info->stat_flags & (ESP_STAT_DMA_RX | ESP_STAT_DMA_TX)) { - f = claim_dma_lock(); - disable_dma(dma); - clear_dma_ff(dma); - release_dma_lock(f); - - dma_bytes = 0; - } - - /* - * Free the IRQ - */ - free_irq(info->irq, info); - - if (dma_buffer) { - struct esp_struct *current_port = ports; - - while (current_port) { - if ((current_port != info) && - (current_port->port.flags & ASYNC_INITIALIZED)) - break; - - current_port = current_port->next_port; - } - - if (!current_port) { - free_dma(dma); - free_pages((unsigned long)dma_buffer, - get_order(DMA_BUFFER_SZ)); - dma_buffer = NULL; - } - } - - if (info->xmit_buf) { - free_page((unsigned long) info->xmit_buf); - info->xmit_buf = NULL; - } - - info->IER = 0; - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, 0x00); - - if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) - info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS); - - info->MCR &= ~UART_MCR_OUT2; - serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); - serial_out(info, UART_ESI_CMD2, UART_MCR); - serial_out(info, UART_ESI_CMD2, info->MCR); - - if (info->port.tty) - set_bit(TTY_IO_ERROR, &info->port.tty->flags); - - info->port.flags &= ~ASYNC_INITIALIZED; - spin_unlock_irqrestore(&info->lock, flags); -} - -/* - * This routine is called to set the UART divisor registers to match - * the specified baud rate for a serial port. - */ -static void change_speed(struct esp_struct *info) -{ - unsigned short port; - int quot = 0; - unsigned cflag, cval; - int baud, bits; - unsigned char flow1 = 0, flow2 = 0; - unsigned long flags; - - if (!info->port.tty || !info->port.tty->termios) - return; - cflag = info->port.tty->termios->c_cflag; - port = info->io_port; - - /* byte size and parity */ - switch (cflag & CSIZE) { - case CS5: cval = 0x00; bits = 7; break; - case CS6: cval = 0x01; bits = 8; break; - case CS7: cval = 0x02; bits = 9; break; - case CS8: cval = 0x03; bits = 10; break; - default: cval = 0x00; bits = 7; break; - } - if (cflag & CSTOPB) { - cval |= 0x04; - bits++; - } - if (cflag & PARENB) { - cval |= UART_LCR_PARITY; - bits++; - } - if (!(cflag & PARODD)) - cval |= UART_LCR_EPAR; -#ifdef CMSPAR - if (cflag & CMSPAR) - cval |= UART_LCR_SPAR; -#endif - baud = tty_get_baud_rate(info->port.tty); - if (baud == 38400 && - ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST)) - quot = info->custom_divisor; - else { - if (baud == 134) /* Special case since 134 is really 134.5 */ - quot = (2*BASE_BAUD / 269); - else if (baud) - quot = BASE_BAUD / baud; - } - /* If the quotient is ever zero, default to 9600 bps */ - if (!quot) - quot = BASE_BAUD / 9600; - - if (baud) { - /* Actual rate */ - baud = BASE_BAUD/quot; - tty_encode_baud_rate(info->port.tty, baud, baud); - } - info->timeout = ((1024 * HZ * bits * quot) / BASE_BAUD) + (HZ / 50); - - /* CTS flow control flag and modem status interrupts */ - /* info->IER &= ~UART_IER_MSI; */ - if (cflag & CRTSCTS) { - info->port.flags |= ASYNC_CTS_FLOW; - /* info->IER |= UART_IER_MSI; */ - flow1 = 0x04; - flow2 = 0x10; - } else - info->port.flags &= ~ASYNC_CTS_FLOW; - if (cflag & CLOCAL) - info->port.flags &= ~ASYNC_CHECK_CD; - else - info->port.flags |= ASYNC_CHECK_CD; - - /* - * Set up parity check flag - */ - info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (I_INPCK(info->port.tty)) - info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) - info->read_status_mask |= UART_LSR_BI; - - info->ignore_status_mask = 0; -#if 0 - /* This should be safe, but for some broken bits of hardware... */ - if (I_IGNPAR(info->port.tty)) { - info->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE; - info->read_status_mask |= UART_LSR_PE | UART_LSR_FE; - } -#endif - if (I_IGNBRK(info->port.tty)) { - info->ignore_status_mask |= UART_LSR_BI; - info->read_status_mask |= UART_LSR_BI; - /* - * If we're ignore parity and break indicators, ignore - * overruns too. (For real raw support). - */ - if (I_IGNPAR(info->port.tty)) { - info->ignore_status_mask |= UART_LSR_OE | \ - UART_LSR_PE | UART_LSR_FE; - info->read_status_mask |= UART_LSR_OE | \ - UART_LSR_PE | UART_LSR_FE; - } - } - - if (I_IXOFF(info->port.tty)) - flow1 |= 0x81; - - spin_lock_irqsave(&info->lock, flags); - /* set baud */ - serial_out(info, UART_ESI_CMD1, ESI_SET_BAUD); - serial_out(info, UART_ESI_CMD2, quot >> 8); - serial_out(info, UART_ESI_CMD2, quot & 0xff); - - /* set data bits, parity, etc. */ - serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); - serial_out(info, UART_ESI_CMD2, UART_LCR); - serial_out(info, UART_ESI_CMD2, cval); - - /* Enable flow control */ - serial_out(info, UART_ESI_CMD1, ESI_SET_FLOW_CNTL); - serial_out(info, UART_ESI_CMD2, flow1); - serial_out(info, UART_ESI_CMD2, flow2); - - /* set flow control characters (XON/XOFF only) */ - if (I_IXOFF(info->port.tty)) { - serial_out(info, UART_ESI_CMD1, ESI_SET_FLOW_CHARS); - serial_out(info, UART_ESI_CMD2, START_CHAR(info->port.tty)); - serial_out(info, UART_ESI_CMD2, STOP_CHAR(info->port.tty)); - serial_out(info, UART_ESI_CMD2, 0x10); - serial_out(info, UART_ESI_CMD2, 0x21); - switch (cflag & CSIZE) { - case CS5: - serial_out(info, UART_ESI_CMD2, 0x1f); - break; - case CS6: - serial_out(info, UART_ESI_CMD2, 0x3f); - break; - case CS7: - case CS8: - serial_out(info, UART_ESI_CMD2, 0x7f); - break; - default: - serial_out(info, UART_ESI_CMD2, 0xff); - break; - } - } - - /* Set high/low water */ - serial_out(info, UART_ESI_CMD1, ESI_SET_FLOW_LVL); - serial_out(info, UART_ESI_CMD2, info->config.flow_off >> 8); - serial_out(info, UART_ESI_CMD2, info->config.flow_off); - serial_out(info, UART_ESI_CMD2, info->config.flow_on >> 8); - serial_out(info, UART_ESI_CMD2, info->config.flow_on); - - spin_unlock_irqrestore(&info->lock, flags); -} - -static int rs_put_char(struct tty_struct *tty, unsigned char ch) -{ - struct esp_struct *info = tty->driver_data; - unsigned long flags; - int ret = 0; - - if (serial_paranoia_check(info, tty->name, "rs_put_char")) - return 0; - - if (!info->xmit_buf) - return 0; - - spin_lock_irqsave(&info->lock, flags); - if (info->xmit_cnt < ESP_XMIT_SIZE - 1) { - info->xmit_buf[info->xmit_head++] = ch; - info->xmit_head &= ESP_XMIT_SIZE-1; - info->xmit_cnt++; - ret = 1; - } - spin_unlock_irqrestore(&info->lock, flags); - return ret; -} - -static void rs_flush_chars(struct tty_struct *tty) -{ - struct esp_struct *info = tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_flush_chars")) - return; - - spin_lock_irqsave(&info->lock, flags); - - if (info->xmit_cnt <= 0 || tty->stopped || !info->xmit_buf) - goto out; - - if (!(info->IER & UART_IER_THRI)) { - info->IER |= UART_IER_THRI; - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, info->IER); - } -out: - spin_unlock_irqrestore(&info->lock, flags); -} - -static int rs_write(struct tty_struct *tty, - const unsigned char *buf, int count) -{ - int c, t, ret = 0; - struct esp_struct *info = tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_write")) - return 0; - - if (!info->xmit_buf) - return 0; - - while (1) { - /* Thanks to R. Wolff for suggesting how to do this with */ - /* interrupts enabled */ - - c = count; - t = ESP_XMIT_SIZE - info->xmit_cnt - 1; - - if (t < c) - c = t; - - t = ESP_XMIT_SIZE - info->xmit_head; - - if (t < c) - c = t; - - if (c <= 0) - break; - - memcpy(info->xmit_buf + info->xmit_head, buf, c); - - info->xmit_head = (info->xmit_head + c) & (ESP_XMIT_SIZE-1); - info->xmit_cnt += c; - buf += c; - count -= c; - ret += c; - } - - spin_lock_irqsave(&info->lock, flags); - - if (info->xmit_cnt && !tty->stopped && !(info->IER & UART_IER_THRI)) { - info->IER |= UART_IER_THRI; - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, info->IER); - } - - spin_unlock_irqrestore(&info->lock, flags); - return ret; -} - -static int rs_write_room(struct tty_struct *tty) -{ - struct esp_struct *info = tty->driver_data; - int ret; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_write_room")) - return 0; - - spin_lock_irqsave(&info->lock, flags); - - ret = ESP_XMIT_SIZE - info->xmit_cnt - 1; - if (ret < 0) - ret = 0; - spin_unlock_irqrestore(&info->lock, flags); - return ret; -} - -static int rs_chars_in_buffer(struct tty_struct *tty) -{ - struct esp_struct *info = tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) - return 0; - return info->xmit_cnt; -} - -static void rs_flush_buffer(struct tty_struct *tty) -{ - struct esp_struct *info = tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) - return; - spin_lock_irqsave(&info->lock, flags); - info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; - spin_unlock_irqrestore(&info->lock, flags); - tty_wakeup(tty); -} - -/* - * ------------------------------------------------------------ - * rs_throttle() - * - * This routine is called by the upper-layer tty layer to signal that - * incoming characters should be throttled. - * ------------------------------------------------------------ - */ -static void rs_throttle(struct tty_struct *tty) -{ - struct esp_struct *info = tty->driver_data; - unsigned long flags; -#ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk("throttle %s: %d....\n", tty_name(tty, buf), - tty_chars_in_buffer(tty)); -#endif - - if (serial_paranoia_check(info, tty->name, "rs_throttle")) - return; - - spin_lock_irqsave(&info->lock, flags); - info->IER &= ~UART_IER_RDI; - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, info->IER); - serial_out(info, UART_ESI_CMD1, ESI_SET_RX_TIMEOUT); - serial_out(info, UART_ESI_CMD2, 0x00); - spin_unlock_irqrestore(&info->lock, flags); -} - -static void rs_unthrottle(struct tty_struct *tty) -{ - struct esp_struct *info = tty->driver_data; - unsigned long flags; -#ifdef SERIAL_DEBUG_THROTTLE - char buf[64]; - - printk(KERN_DEBUG "unthrottle %s: %d....\n", tty_name(tty, buf), - tty_chars_in_buffer(tty)); -#endif - - if (serial_paranoia_check(info, tty->name, "rs_unthrottle")) - return; - - spin_lock_irqsave(&info->lock, flags); - info->IER |= UART_IER_RDI; - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, info->IER); - serial_out(info, UART_ESI_CMD1, ESI_SET_RX_TIMEOUT); - serial_out(info, UART_ESI_CMD2, info->config.rx_timeout); - spin_unlock_irqrestore(&info->lock, flags); -} - -/* - * ------------------------------------------------------------ - * rs_ioctl() and friends - * ------------------------------------------------------------ - */ - -static int get_serial_info(struct esp_struct *info, - struct serial_struct __user *retinfo) -{ - struct serial_struct tmp; - - lock_kernel(); - memset(&tmp, 0, sizeof(tmp)); - tmp.type = PORT_16550A; - tmp.line = info->line; - tmp.port = info->io_port; - tmp.irq = info->irq; - tmp.flags = info->port.flags; - tmp.xmit_fifo_size = 1024; - tmp.baud_base = BASE_BAUD; - tmp.close_delay = info->close_delay; - tmp.closing_wait = info->closing_wait; - tmp.custom_divisor = info->custom_divisor; - tmp.hub6 = 0; - unlock_kernel(); - if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) - return -EFAULT; - return 0; -} - -static int get_esp_config(struct esp_struct *info, - struct hayes_esp_config __user *retinfo) -{ - struct hayes_esp_config tmp; - - if (!retinfo) - return -EFAULT; - - memset(&tmp, 0, sizeof(tmp)); - lock_kernel(); - tmp.rx_timeout = info->config.rx_timeout; - tmp.rx_trigger = info->config.rx_trigger; - tmp.tx_trigger = info->config.tx_trigger; - tmp.flow_off = info->config.flow_off; - tmp.flow_on = info->config.flow_on; - tmp.pio_threshold = info->config.pio_threshold; - tmp.dma_channel = (info->stat_flags & ESP_STAT_NEVER_DMA ? 0 : dma); - unlock_kernel(); - - return copy_to_user(retinfo, &tmp, sizeof(*retinfo)) ? -EFAULT : 0; -} - -static int set_serial_info(struct esp_struct *info, - struct serial_struct __user *new_info) -{ - struct serial_struct new_serial; - struct esp_struct old_info; - unsigned int change_irq; - int retval = 0; - struct esp_struct *current_async; - - if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) - return -EFAULT; - old_info = *info; - - if ((new_serial.type != PORT_16550A) || - (new_serial.hub6) || - (info->io_port != new_serial.port) || - (new_serial.baud_base != BASE_BAUD) || - (new_serial.irq > 15) || - (new_serial.irq < 2) || - (new_serial.irq == 6) || - (new_serial.irq == 8) || - (new_serial.irq == 13)) - return -EINVAL; - - change_irq = new_serial.irq != info->irq; - - if (change_irq && (info->line % 8)) - return -EINVAL; - - if (!capable(CAP_SYS_ADMIN)) { - if (change_irq || - (new_serial.close_delay != info->close_delay) || - ((new_serial.flags & ~ASYNC_USR_MASK) != - (info->port.flags & ~ASYNC_USR_MASK))) - return -EPERM; - info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) | - (new_serial.flags & ASYNC_USR_MASK)); - info->custom_divisor = new_serial.custom_divisor; - } else { - if (new_serial.irq == 2) - new_serial.irq = 9; - - if (change_irq) { - current_async = ports; - - while (current_async) { - if ((current_async->line >= info->line) && - (current_async->line < (info->line + 8))) { - if (current_async == info) { - if (current_async->port.count > 1) - return -EBUSY; - } else if (current_async->port.count) - return -EBUSY; - } - - current_async = current_async->next_port; - } - } - - /* - * OK, past this point, all the error checking has been done. - * At this point, we start making changes..... - */ - - info->port.flags = ((info->port.flags & ~ASYNC_FLAGS) | - (new_serial.flags & ASYNC_FLAGS)); - info->custom_divisor = new_serial.custom_divisor; - info->close_delay = new_serial.close_delay * HZ/100; - info->closing_wait = new_serial.closing_wait * HZ/100; - - if (change_irq) { - /* - * We need to shutdown the serial port at the old - * port/irq combination. - */ - shutdown(info); - - current_async = ports; - - while (current_async) { - if ((current_async->line >= info->line) && - (current_async->line < (info->line + 8))) - current_async->irq = new_serial.irq; - - current_async = current_async->next_port; - } - - serial_out(info, UART_ESI_CMD1, ESI_SET_ENH_IRQ); - if (info->irq == 9) - serial_out(info, UART_ESI_CMD2, 0x02); - else - serial_out(info, UART_ESI_CMD2, info->irq); - } - } - - if (info->port.flags & ASYNC_INITIALIZED) { - if (((old_info.port.flags & ASYNC_SPD_MASK) != - (info->port.flags & ASYNC_SPD_MASK)) || - (old_info.custom_divisor != info->custom_divisor)) { - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI) - info->port.tty->alt_speed = 57600; - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI) - info->port.tty->alt_speed = 115200; - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_SHI) - info->port.tty->alt_speed = 230400; - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_WARP) - info->port.tty->alt_speed = 460800; - change_speed(info); - } - } else - retval = startup(info); - - return retval; -} - -static int set_esp_config(struct esp_struct *info, - struct hayes_esp_config __user *new_info) -{ - struct hayes_esp_config new_config; - unsigned int change_dma; - int retval = 0; - struct esp_struct *current_async; - unsigned long flags; - - /* Perhaps a non-sysadmin user should be able to do some of these */ - /* operations. I haven't decided yet. */ - - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - - if (copy_from_user(&new_config, new_info, sizeof(new_config))) - return -EFAULT; - - if ((new_config.flow_on >= new_config.flow_off) || - (new_config.rx_trigger < 1) || - (new_config.tx_trigger < 1) || - (new_config.flow_off < 1) || - (new_config.flow_on < 1) || - (new_config.rx_trigger > 1023) || - (new_config.tx_trigger > 1023) || - (new_config.flow_off > 1023) || - (new_config.flow_on > 1023) || - (new_config.pio_threshold < 0) || - (new_config.pio_threshold > 1024)) - return -EINVAL; - - if ((new_config.dma_channel != 1) && (new_config.dma_channel != 3)) - new_config.dma_channel = 0; - - if (info->stat_flags & ESP_STAT_NEVER_DMA) - change_dma = new_config.dma_channel; - else - change_dma = (new_config.dma_channel != dma); - - if (change_dma) { - if (new_config.dma_channel) { - /* PIO mode to DMA mode transition OR */ - /* change current DMA channel */ - current_async = ports; - - while (current_async) { - if (current_async == info) { - if (current_async->port.count > 1) - return -EBUSY; - } else if (current_async->port.count) - return -EBUSY; - - current_async = current_async->next_port; - } - - shutdown(info); - dma = new_config.dma_channel; - info->stat_flags &= ~ESP_STAT_NEVER_DMA; - - /* all ports must use the same DMA channel */ - - spin_lock_irqsave(&info->lock, flags); - current_async = ports; - - while (current_async) { - esp_basic_init(current_async); - current_async = current_async->next_port; - } - spin_unlock_irqrestore(&info->lock, flags); - } else { - /* DMA mode to PIO mode only */ - if (info->port.count > 1) - return -EBUSY; - - shutdown(info); - spin_lock_irqsave(&info->lock, flags); - info->stat_flags |= ESP_STAT_NEVER_DMA; - esp_basic_init(info); - spin_unlock_irqrestore(&info->lock, flags); - } - } - - info->config.pio_threshold = new_config.pio_threshold; - - if ((new_config.flow_off != info->config.flow_off) || - (new_config.flow_on != info->config.flow_on)) { - info->config.flow_off = new_config.flow_off; - info->config.flow_on = new_config.flow_on; - - spin_lock_irqsave(&info->lock, flags); - serial_out(info, UART_ESI_CMD1, ESI_SET_FLOW_LVL); - serial_out(info, UART_ESI_CMD2, new_config.flow_off >> 8); - serial_out(info, UART_ESI_CMD2, new_config.flow_off); - serial_out(info, UART_ESI_CMD2, new_config.flow_on >> 8); - serial_out(info, UART_ESI_CMD2, new_config.flow_on); - spin_unlock_irqrestore(&info->lock, flags); - } - - if ((new_config.rx_trigger != info->config.rx_trigger) || - (new_config.tx_trigger != info->config.tx_trigger)) { - info->config.rx_trigger = new_config.rx_trigger; - info->config.tx_trigger = new_config.tx_trigger; - spin_lock_irqsave(&info->lock, flags); - serial_out(info, UART_ESI_CMD1, ESI_SET_TRIGGER); - serial_out(info, UART_ESI_CMD2, - new_config.rx_trigger >> 8); - serial_out(info, UART_ESI_CMD2, new_config.rx_trigger); - serial_out(info, UART_ESI_CMD2, - new_config.tx_trigger >> 8); - serial_out(info, UART_ESI_CMD2, new_config.tx_trigger); - spin_unlock_irqrestore(&info->lock, flags); - } - - if (new_config.rx_timeout != info->config.rx_timeout) { - info->config.rx_timeout = new_config.rx_timeout; - spin_lock_irqsave(&info->lock, flags); - - if (info->IER & UART_IER_RDI) { - serial_out(info, UART_ESI_CMD1, - ESI_SET_RX_TIMEOUT); - serial_out(info, UART_ESI_CMD2, - new_config.rx_timeout); - } - - spin_unlock_irqrestore(&info->lock, flags); - } - - if (!(info->port.flags & ASYNC_INITIALIZED)) - retval = startup(info); - - return retval; -} - -/* - * get_lsr_info - get line status register info - * - * Purpose: Let user call ioctl() to get info when the UART physically - * is emptied. On bus types like RS485, the transmitter must - * release the bus after transmitting. This must be done when - * the transmit shift register is empty, not be done when the - * transmit holding register is empty. This functionality - * allows an RS485 driver to be written in user space. - */ -static int get_lsr_info(struct esp_struct *info, unsigned int __user *value) -{ - unsigned char status; - unsigned int result; - unsigned long flags; - - spin_lock_irqsave(&info->lock, flags); - serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT); - status = serial_in(info, UART_ESI_STAT1); - spin_unlock_irqrestore(&info->lock, flags); - result = ((status & UART_LSR_TEMT) ? TIOCSER_TEMT : 0); - return put_user(result, value); -} - - -static int esp_tiocmget(struct tty_struct *tty, struct file *file) -{ - struct esp_struct *info = tty->driver_data; - unsigned char control, status; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, __func__)) - return -ENODEV; - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - - control = info->MCR; - - spin_lock_irqsave(&info->lock, flags); - serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT); - status = serial_in(info, UART_ESI_STAT2); - spin_unlock_irqrestore(&info->lock, flags); - - return ((control & UART_MCR_RTS) ? TIOCM_RTS : 0) - | ((control & UART_MCR_DTR) ? TIOCM_DTR : 0) - | ((status & UART_MSR_DCD) ? TIOCM_CAR : 0) - | ((status & UART_MSR_RI) ? TIOCM_RNG : 0) - | ((status & UART_MSR_DSR) ? TIOCM_DSR : 0) - | ((status & UART_MSR_CTS) ? TIOCM_CTS : 0); -} - -static int esp_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ - struct esp_struct *info = tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, __func__)) - return -ENODEV; - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - - spin_lock_irqsave(&info->lock, flags); - - if (set & TIOCM_RTS) - info->MCR |= UART_MCR_RTS; - if (set & TIOCM_DTR) - info->MCR |= UART_MCR_DTR; - - if (clear & TIOCM_RTS) - info->MCR &= ~UART_MCR_RTS; - if (clear & TIOCM_DTR) - info->MCR &= ~UART_MCR_DTR; - - serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); - serial_out(info, UART_ESI_CMD2, UART_MCR); - serial_out(info, UART_ESI_CMD2, info->MCR); - - spin_unlock_irqrestore(&info->lock, flags); - return 0; -} - -/* - * rs_break() --- routine which turns the break handling on or off - */ -static int esp_break(struct tty_struct *tty, int break_state) -{ - struct esp_struct *info = tty->driver_data; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "esp_break")) - return -EINVAL; - - if (break_state == -1) { - spin_lock_irqsave(&info->lock, flags); - serial_out(info, UART_ESI_CMD1, ESI_ISSUE_BREAK); - serial_out(info, UART_ESI_CMD2, 0x01); - spin_unlock_irqrestore(&info->lock, flags); - - /* FIXME - new style wait needed here */ - interruptible_sleep_on(&info->break_wait); - } else { - spin_lock_irqsave(&info->lock, flags); - serial_out(info, UART_ESI_CMD1, ESI_ISSUE_BREAK); - serial_out(info, UART_ESI_CMD2, 0x00); - spin_unlock_irqrestore(&info->lock, flags); - } - return 0; -} - -static int rs_ioctl(struct tty_struct *tty, struct file *file, - unsigned int cmd, unsigned long arg) -{ - struct esp_struct *info = tty->driver_data; - struct async_icount cprev, cnow; /* kernel counter temps */ - struct serial_icounter_struct __user *p_cuser; /* user space */ - void __user *argp = (void __user *)arg; - unsigned long flags; - int ret; - - if (serial_paranoia_check(info, tty->name, "rs_ioctl")) - return -ENODEV; - - if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && - (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && - (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT) && - (cmd != TIOCMIWAIT) && (cmd != TIOCGICOUNT) && - (cmd != TIOCGHAYESESP) && (cmd != TIOCSHAYESESP)) { - if (tty->flags & (1 << TTY_IO_ERROR)) - return -EIO; - } - - switch (cmd) { - case TIOCGSERIAL: - return get_serial_info(info, argp); - case TIOCSSERIAL: - lock_kernel(); - ret = set_serial_info(info, argp); - unlock_kernel(); - return ret; - case TIOCSERGWILD: - return put_user(0L, (unsigned long __user *)argp); - case TIOCSERGETLSR: /* Get line status register */ - return get_lsr_info(info, argp); - case TIOCSERSWILD: - if (!capable(CAP_SYS_ADMIN)) - return -EPERM; - return 0; - /* - * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - * - mask passed in arg for lines of interest - * (use |'ed TIOCM_RNG/DSR/CD/CTS for masking) - * Caller should use TIOCGICOUNT to see which one it was - */ - case TIOCMIWAIT: - spin_lock_irqsave(&info->lock, flags); - cprev = info->icount; /* note the counters on entry */ - spin_unlock_irqrestore(&info->lock, flags); - while (1) { - /* FIXME: convert to new style wakeup */ - interruptible_sleep_on(&info->port.delta_msr_wait); - /* see if a signal did it */ - if (signal_pending(current)) - return -ERESTARTSYS; - spin_lock_irqsave(&info->lock, flags); - cnow = info->icount; /* atomic copy */ - spin_unlock_irqrestore(&info->lock, flags); - if (cnow.rng == cprev.rng && - cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && - cnow.cts == cprev.cts) - return -EIO; /* no change => error */ - if (((arg & TIOCM_RNG) && - (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && - (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && - (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && - (cnow.cts != cprev.cts))) { - return 0; - } - cprev = cnow; - } - /* NOTREACHED */ - /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for - * RI where only 0->1 is counted. - */ - case TIOCGICOUNT: - spin_lock_irqsave(&info->lock, flags); - cnow = info->icount; - spin_unlock_irqrestore(&info->lock, flags); - p_cuser = argp; - if (put_user(cnow.cts, &p_cuser->cts) || - put_user(cnow.dsr, &p_cuser->dsr) || - put_user(cnow.rng, &p_cuser->rng) || - put_user(cnow.dcd, &p_cuser->dcd)) - return -EFAULT; - return 0; - case TIOCGHAYESESP: - return get_esp_config(info, argp); - case TIOCSHAYESESP: - lock_kernel(); - ret = set_esp_config(info, argp); - unlock_kernel(); - return ret; - default: - return -ENOIOCTLCMD; - } - return 0; -} - -static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) -{ - struct esp_struct *info = tty->driver_data; - unsigned long flags; - - change_speed(info); - - spin_lock_irqsave(&info->lock, flags); - - /* Handle transition to B0 status */ - if ((old_termios->c_cflag & CBAUD) && - !(tty->termios->c_cflag & CBAUD)) { - info->MCR &= ~(UART_MCR_DTR|UART_MCR_RTS); - serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); - serial_out(info, UART_ESI_CMD2, UART_MCR); - serial_out(info, UART_ESI_CMD2, info->MCR); - } - - /* Handle transition away from B0 status */ - if (!(old_termios->c_cflag & CBAUD) && - (tty->termios->c_cflag & CBAUD)) { - info->MCR |= (UART_MCR_DTR | UART_MCR_RTS); - serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); - serial_out(info, UART_ESI_CMD2, UART_MCR); - serial_out(info, UART_ESI_CMD2, info->MCR); - } - - spin_unlock_irqrestore(&info->lock, flags); - - /* Handle turning of CRTSCTS */ - if ((old_termios->c_cflag & CRTSCTS) && - !(tty->termios->c_cflag & CRTSCTS)) { - rs_start(tty); - } -} - -/* - * ------------------------------------------------------------ - * rs_close() - * - * This routine is called when the serial port gets closed. First, we - * wait for the last remaining data to be sent. Then, we unlink its - * async structure from the interrupt chain if necessary, and we free - * that IRQ if nothing is left in the chain. - * ------------------------------------------------------------ - */ -static void rs_close(struct tty_struct *tty, struct file *filp) -{ - struct esp_struct *info = tty->driver_data; - unsigned long flags; - - if (!info || serial_paranoia_check(info, tty->name, "rs_close")) - return; - - spin_lock_irqsave(&info->lock, flags); - - if (tty_hung_up_p(filp)) { - DBG_CNT("before DEC-hung"); - goto out; - } - -#ifdef SERIAL_DEBUG_OPEN - printk(KERN_DEBUG "rs_close ttys%d, count = %d\n", - info->line, info->port.count); -#endif - if (tty->count == 1 && info->port.count != 1) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - printk(KERN_DEBUG "rs_close: bad serial port count; tty->count is 1, info->port.count is %d\n", info->port.count); - info->port.count = 1; - } - if (--info->port.count < 0) { - printk(KERN_ERR "rs_close: bad serial port count for ttys%d: %d\n", - info->line, info->port.count); - info->port.count = 0; - } - if (info->port.count) { - DBG_CNT("before DEC-2"); - goto out; - } - info->port.flags |= ASYNC_CLOSING; - - spin_unlock_irqrestore(&info->lock, flags); - /* - * Now we wait for the transmit buffer to clear; and we notify - * the line discipline to only process XON/XOFF characters. - */ - tty->closing = 1; - if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->closing_wait); - /* - * At this point we stop accepting input. To do this, we - * disable the receive line status interrupts, and tell the - * interrupt driver to stop checking the data ready bit in the - * line status register. - */ - /* info->IER &= ~UART_IER_RLSI; */ - info->IER &= ~UART_IER_RDI; - info->read_status_mask &= ~UART_LSR_DR; - if (info->port.flags & ASYNC_INITIALIZED) { - - spin_lock_irqsave(&info->lock, flags); - serial_out(info, UART_ESI_CMD1, ESI_SET_SRV_MASK); - serial_out(info, UART_ESI_CMD2, info->IER); - - /* disable receive timeout */ - serial_out(info, UART_ESI_CMD1, ESI_SET_RX_TIMEOUT); - serial_out(info, UART_ESI_CMD2, 0x00); - - spin_unlock_irqrestore(&info->lock, flags); - - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - rs_wait_until_sent(tty, info->timeout); - } - shutdown(info); - rs_flush_buffer(tty); - tty_ldisc_flush(tty); - tty->closing = 0; - info->port.tty = NULL; - - if (info->port.blocked_open) { - if (info->close_delay) - msleep_interruptible(jiffies_to_msecs(info->close_delay)); - wake_up_interruptible(&info->port.open_wait); - } - info->port.flags &= ~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&info->port.close_wait); - return; - -out: - spin_unlock_irqrestore(&info->lock, flags); -} - -static void rs_wait_until_sent(struct tty_struct *tty, int timeout) -{ - struct esp_struct *info = tty->driver_data; - unsigned long orig_jiffies, char_time; - unsigned long flags; - - if (serial_paranoia_check(info, tty->name, "rs_wait_until_sent")) - return; - - orig_jiffies = jiffies; - char_time = ((info->timeout - HZ / 50) / 1024) / 5; - - if (!char_time) - char_time = 1; - - spin_lock_irqsave(&info->lock, flags); - serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND); - serial_out(info, UART_ESI_CMD1, ESI_GET_TX_AVAIL); - - while ((serial_in(info, UART_ESI_STAT1) != 0x03) || - (serial_in(info, UART_ESI_STAT2) != 0xff)) { - - spin_unlock_irqrestore(&info->lock, flags); - msleep_interruptible(jiffies_to_msecs(char_time)); - - if (signal_pending(current)) - return; - - if (timeout && time_after(jiffies, orig_jiffies + timeout)) - return; - - spin_lock_irqsave(&info->lock, flags); - serial_out(info, UART_ESI_CMD1, ESI_NO_COMMAND); - serial_out(info, UART_ESI_CMD1, ESI_GET_TX_AVAIL); - } - spin_unlock_irqrestore(&info->lock, flags); - set_current_state(TASK_RUNNING); -} - -/* - * esp_hangup() --- called by tty_hangup() when a hangup is signaled. - */ -static void esp_hangup(struct tty_struct *tty) -{ - struct esp_struct *info = tty->driver_data; - - if (serial_paranoia_check(info, tty->name, "esp_hangup")) - return; - - rs_flush_buffer(tty); - shutdown(info); - info->port.count = 0; - info->port.flags &= ~ASYNC_NORMAL_ACTIVE; - info->port.tty = NULL; - wake_up_interruptible(&info->port.open_wait); -} - -static int esp_carrier_raised(struct tty_port *port) -{ - struct esp_struct *info = container_of(port, struct esp_struct, port); - serial_out(info, UART_ESI_CMD1, ESI_GET_UART_STAT); - if (serial_in(info, UART_ESI_STAT2) & UART_MSR_DCD) - return 1; - return 0; -} - -/* - * ------------------------------------------------------------ - * esp_open() and friends - * ------------------------------------------------------------ - */ -static int block_til_ready(struct tty_struct *tty, struct file *filp, - struct esp_struct *info) -{ - DECLARE_WAITQUEUE(wait, current); - int retval; - int do_clocal = 0; - unsigned long flags; - int cd; - struct tty_port *port = &info->port; - - /* - * If the device is in the middle of being closed, then block - * until it's done, and then try again. - */ - if (tty_hung_up_p(filp) || - (port->flags & ASYNC_CLOSING)) { - if (port->flags & ASYNC_CLOSING) - interruptible_sleep_on(&port->close_wait); -#ifdef SERIAL_DO_RESTART - if (port->flags & ASYNC_HUP_NOTIFY) - return -EAGAIN; - else - return -ERESTARTSYS; -#else - return -EAGAIN; -#endif - } - - /* - * If non-blocking mode is set, or the port is not enabled, - * then make the check up front and then exit. - */ - if ((filp->f_flags & O_NONBLOCK) || - (tty->flags & (1 << TTY_IO_ERROR))) { - port->flags |= ASYNC_NORMAL_ACTIVE; - return 0; - } - - if (tty->termios->c_cflag & CLOCAL) - do_clocal = 1; - - /* - * Block waiting for the carrier detect and the line to become - * free (i.e., not in use by the callout). While we are in - * this loop, port->count is dropped by one, so that - * rs_close() knows when to free things. We restore it upon - * exit, either normal or abnormal. - */ - retval = 0; - add_wait_queue(&port->open_wait, &wait); -#ifdef SERIAL_DEBUG_OPEN - printk(KERN_DEBUG "block_til_ready before block: ttys%d, count = %d\n", - info->line, port->count); -#endif - spin_lock_irqsave(&info->lock, flags); - if (!tty_hung_up_p(filp)) - port->count--; - port->blocked_open++; - while (1) { - if ((tty->termios->c_cflag & CBAUD)) { - unsigned int scratch; - - serial_out(info, UART_ESI_CMD1, ESI_READ_UART); - serial_out(info, UART_ESI_CMD2, UART_MCR); - scratch = serial_in(info, UART_ESI_STAT1); - serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); - serial_out(info, UART_ESI_CMD2, UART_MCR); - serial_out(info, UART_ESI_CMD2, - scratch | UART_MCR_DTR | UART_MCR_RTS); - } - set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || - !(port->flags & ASYNC_INITIALIZED)) { -#ifdef SERIAL_DO_RESTART - if (port->flags & ASYNC_HUP_NOTIFY) - retval = -EAGAIN; - else - retval = -ERESTARTSYS; -#else - retval = -EAGAIN; -#endif - break; - } - - cd = tty_port_carrier_raised(port); - - if (!(port->flags & ASYNC_CLOSING) && - (do_clocal)) - break; - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } -#ifdef SERIAL_DEBUG_OPEN - printk(KERN_DEBUG "block_til_ready blocking: ttys%d, count = %d\n", - info->line, port->count); -#endif - spin_unlock_irqrestore(&info->lock, flags); - schedule(); - spin_lock_irqsave(&info->lock, flags); - } - set_current_state(TASK_RUNNING); - remove_wait_queue(&port->open_wait, &wait); - if (!tty_hung_up_p(filp)) - port->count++; - port->blocked_open--; - spin_unlock_irqrestore(&info->lock, flags); -#ifdef SERIAL_DEBUG_OPEN - printk(KERN_DEBUG "block_til_ready after blocking: ttys%d, count = %d\n", - info->line, port->count); -#endif - if (retval) - return retval; - port->flags |= ASYNC_NORMAL_ACTIVE; - return 0; -} - -/* - * This routine is called whenever a serial port is opened. It - * enables interrupts for a serial port, linking in its async structure into - * the IRQ chain. It also performs the serial-specific - * initialization for the tty structure. - */ -static int esp_open(struct tty_struct *tty, struct file *filp) -{ - struct esp_struct *info; - int retval, line; - unsigned long flags; - - line = tty->index; - if ((line < 0) || (line >= NR_PORTS)) - return -ENODEV; - - /* find the port in the chain */ - - info = ports; - - while (info && (info->line != line)) - info = info->next_port; - - if (!info) { - serial_paranoia_check(info, tty->name, "esp_open"); - return -ENODEV; - } - -#ifdef SERIAL_DEBUG_OPEN - printk(KERN_DEBUG "esp_open %s, count = %d\n", tty->name, info->port.count); -#endif - spin_lock_irqsave(&info->lock, flags); - info->port.count++; - tty->driver_data = info; - info->port.tty = tty; - - spin_unlock_irqrestore(&info->lock, flags); - - /* - * Start up serial port - */ - retval = startup(info); - if (retval) - return retval; - - retval = block_til_ready(tty, filp, info); - if (retval) { -#ifdef SERIAL_DEBUG_OPEN - printk(KERN_DEBUG "esp_open returning after block_til_ready with %d\n", - retval); -#endif - return retval; - } -#ifdef SERIAL_DEBUG_OPEN - printk(KERN_DEBUG "esp_open %s successful...", tty->name); -#endif - return 0; -} - -/* - * --------------------------------------------------------------------- - * espserial_init() and friends - * - * espserial_init() is called at boot-time to initialize the serial driver. - * --------------------------------------------------------------------- - */ - -/* - * This routine prints out the appropriate serial driver version - * number, and identifies which options were configured into this - * driver. - */ - -static void __init show_serial_version(void) -{ - printk(KERN_INFO "%s version %s (DMA %u)\n", - serial_name, serial_version, dma); -} - -/* - * This routine is called by espserial_init() to initialize a specific serial - * port. - */ -static int autoconfig(struct esp_struct *info) -{ - int port_detected = 0; - unsigned long flags; - - if (!request_region(info->io_port, REGION_SIZE, "esp serial")) - return -EIO; - - spin_lock_irqsave(&info->lock, flags); - /* - * Check for ESP card - */ - - if (serial_in(info, UART_ESI_BASE) == 0xf3) { - serial_out(info, UART_ESI_CMD1, 0x00); - serial_out(info, UART_ESI_CMD1, 0x01); - - if ((serial_in(info, UART_ESI_STAT2) & 0x70) == 0x20) { - port_detected = 1; - - if (!(info->irq)) { - serial_out(info, UART_ESI_CMD1, 0x02); - - if (serial_in(info, UART_ESI_STAT1) & 0x01) - info->irq = 3; - else - info->irq = 4; - } - - - /* put card in enhanced mode */ - /* this prevents access through */ - /* the "old" IO ports */ - esp_basic_init(info); - - /* clear out MCR */ - serial_out(info, UART_ESI_CMD1, ESI_WRITE_UART); - serial_out(info, UART_ESI_CMD2, UART_MCR); - serial_out(info, UART_ESI_CMD2, 0x00); - } - } - if (!port_detected) - release_region(info->io_port, REGION_SIZE); - - spin_unlock_irqrestore(&info->lock, flags); - return (port_detected); -} - -static const struct tty_operations esp_ops = { - .open = esp_open, - .close = rs_close, - .write = rs_write, - .put_char = rs_put_char, - .flush_chars = rs_flush_chars, - .write_room = rs_write_room, - .chars_in_buffer = rs_chars_in_buffer, - .flush_buffer = rs_flush_buffer, - .ioctl = rs_ioctl, - .throttle = rs_throttle, - .unthrottle = rs_unthrottle, - .set_termios = rs_set_termios, - .stop = rs_stop, - .start = rs_start, - .hangup = esp_hangup, - .break_ctl = esp_break, - .wait_until_sent = rs_wait_until_sent, - .tiocmget = esp_tiocmget, - .tiocmset = esp_tiocmset, -}; - -static const struct tty_port_operations esp_port_ops = { - .esp_carrier_raised, -}; - -/* - * The serial driver boot-time initialization code! - */ -static int __init espserial_init(void) -{ - int i, offset; - struct esp_struct *info; - struct esp_struct *last_primary = NULL; - int esp[] = { 0x100, 0x140, 0x180, 0x200, 0x240, 0x280, 0x300, 0x380 }; - - esp_driver = alloc_tty_driver(NR_PORTS); - if (!esp_driver) - return -ENOMEM; - - for (i = 0; i < NR_PRIMARY; i++) { - if (irq[i] != 0) { - if ((irq[i] < 2) || (irq[i] > 15) || (irq[i] == 6) || - (irq[i] == 8) || (irq[i] == 13)) - irq[i] = 0; - else if (irq[i] == 2) - irq[i] = 9; - } - } - - if ((dma != 1) && (dma != 3)) - dma = 0; - - if ((rx_trigger < 1) || (rx_trigger > 1023)) - rx_trigger = 768; - - if ((tx_trigger < 1) || (tx_trigger > 1023)) - tx_trigger = 768; - - if ((flow_off < 1) || (flow_off > 1023)) - flow_off = 1016; - - if ((flow_on < 1) || (flow_on > 1023)) - flow_on = 944; - - if ((rx_timeout < 0) || (rx_timeout > 255)) - rx_timeout = 128; - - if (flow_on >= flow_off) - flow_on = flow_off - 1; - - show_serial_version(); - - /* Initialize the tty_driver structure */ - - esp_driver->owner = THIS_MODULE; - esp_driver->name = "ttyP"; - esp_driver->major = ESP_IN_MAJOR; - esp_driver->minor_start = 0; - esp_driver->type = TTY_DRIVER_TYPE_SERIAL; - esp_driver->subtype = SERIAL_TYPE_NORMAL; - esp_driver->init_termios = tty_std_termios; - esp_driver->init_termios.c_cflag = - B9600 | CS8 | CREAD | HUPCL | CLOCAL; - esp_driver->init_termios.c_ispeed = 9600; - esp_driver->init_termios.c_ospeed = 9600; - esp_driver->flags = TTY_DRIVER_REAL_RAW; - tty_set_operations(esp_driver, &esp_ops); - if (tty_register_driver(esp_driver)) { - printk(KERN_ERR "Couldn't register esp serial driver"); - put_tty_driver(esp_driver); - return 1; - } - - info = kzalloc(sizeof(struct esp_struct), GFP_KERNEL); - - if (!info) { - printk(KERN_ERR "Couldn't allocate memory for esp serial device information\n"); - tty_unregister_driver(esp_driver); - put_tty_driver(esp_driver); - return 1; - } - - spin_lock_init(&info->lock); - /* rx_trigger, tx_trigger are needed by autoconfig */ - info->config.rx_trigger = rx_trigger; - info->config.tx_trigger = tx_trigger; - - i = 0; - offset = 0; - - do { - tty_port_init(&info->port); - info->port.ops = &esp_port_ops; - info->io_port = esp[i] + offset; - info->irq = irq[i]; - info->line = (i * 8) + (offset / 8); - - if (!autoconfig(info)) { - i++; - offset = 0; - continue; - } - - info->custom_divisor = (divisor[i] >> (offset / 2)) & 0xf; - info->port.flags = STD_COM_FLAGS; - if (info->custom_divisor) - info->port.flags |= ASYNC_SPD_CUST; - info->magic = ESP_MAGIC; - info->close_delay = 5*HZ/10; - info->closing_wait = 30*HZ; - info->config.rx_timeout = rx_timeout; - info->config.flow_on = flow_on; - info->config.flow_off = flow_off; - info->config.pio_threshold = pio_threshold; - info->next_port = ports; - init_waitqueue_head(&info->break_wait); - ports = info; - printk(KERN_INFO "ttyP%d at 0x%04x (irq = %d) is an ESP ", - info->line, info->io_port, info->irq); - - if (info->line % 8) { - printk("secondary port\n"); - /* 8 port cards can't do DMA */ - info->stat_flags |= ESP_STAT_NEVER_DMA; - - if (last_primary) - last_primary->stat_flags |= ESP_STAT_NEVER_DMA; - } else { - printk("primary port\n"); - last_primary = info; - irq[i] = info->irq; - } - - if (!dma) - info->stat_flags |= ESP_STAT_NEVER_DMA; - - info = kzalloc(sizeof(struct esp_struct), GFP_KERNEL); - if (!info) { - printk(KERN_ERR "Couldn't allocate memory for esp serial device information\n"); - /* allow use of the already detected ports */ - return 0; - } - - spin_lock_init(&info->lock); - /* rx_trigger, tx_trigger are needed by autoconfig */ - info->config.rx_trigger = rx_trigger; - info->config.tx_trigger = tx_trigger; - - if (offset == 56) { - i++; - offset = 0; - } else { - offset += 8; - } - } while (i < NR_PRIMARY); - - /* free the last port memory allocation */ - kfree(info); - - return 0; -} - -static void __exit espserial_exit(void) -{ - int e1; - struct esp_struct *temp_async; - struct esp_pio_buffer *pio_buf; - - e1 = tty_unregister_driver(esp_driver); - if (e1) - printk(KERN_ERR "esp: failed to unregister driver (%d)\n", e1); - put_tty_driver(esp_driver); - - while (ports) { - if (ports->io_port) - release_region(ports->io_port, REGION_SIZE); - temp_async = ports->next_port; - kfree(ports); - ports = temp_async; - } - - if (dma_buffer) - free_pages((unsigned long)dma_buffer, - get_order(DMA_BUFFER_SZ)); - - while (free_pio_buf) { - pio_buf = free_pio_buf->next; - kfree(free_pio_buf); - free_pio_buf = pio_buf; - } -} - -module_init(espserial_init); -module_exit(espserial_exit); diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c index a632f25f144a..416d3423150d 100644 --- a/drivers/char/hvc_console.c +++ b/drivers/char/hvc_console.c @@ -832,6 +832,7 @@ int hvc_remove(struct hvc_struct *hp) tty_hangup(tty); return 0; } +EXPORT_SYMBOL_GPL(hvc_remove); /* Driver initialization: called as soon as someone uses hvc_alloc(). */ static int hvc_init(void) diff --git a/drivers/char/hvc_iucv.c b/drivers/char/hvc_iucv.c index b8a5d654d3d0..fe62bd0e17b7 100644 --- a/drivers/char/hvc_iucv.c +++ b/drivers/char/hvc_iucv.c @@ -931,7 +931,7 @@ static struct hv_ops hvc_iucv_ops = { }; /* Suspend / resume device operations */ -static struct dev_pm_ops hvc_iucv_pm_ops = { +static const struct dev_pm_ops hvc_iucv_pm_ops = { .freeze = hvc_iucv_pm_freeze, .thaw = hvc_iucv_pm_restore_thaw, .restore = hvc_iucv_pm_restore_thaw, diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c index a6ee32b599a8..b1a71638c772 100644 --- a/drivers/char/hvc_xen.c +++ b/drivers/char/hvc_xen.c @@ -25,6 +25,8 @@ #include <linux/types.h> #include <asm/xen/hypervisor.h> + +#include <xen/xen.h> #include <xen/page.h> #include <xen/events.h> #include <xen/interface/io/console.h> diff --git a/drivers/char/hw_random/core.c b/drivers/char/hw_random/core.c index e989f67bb61f..3d9c61e5acbf 100644 --- a/drivers/char/hw_random/core.c +++ b/drivers/char/hw_random/core.c @@ -158,10 +158,11 @@ static ssize_t rng_dev_read(struct file *filp, char __user *buf, goto out; } } -out_unlock: - mutex_unlock(&rng_mutex); out: return ret ? : err; +out_unlock: + mutex_unlock(&rng_mutex); + goto out; } diff --git a/drivers/char/ipmi/ipmi_kcs_sm.c b/drivers/char/ipmi/ipmi_kcs_sm.c index 80704875794c..cf82fedae099 100644 --- a/drivers/char/ipmi/ipmi_kcs_sm.c +++ b/drivers/char/ipmi/ipmi_kcs_sm.c @@ -370,7 +370,7 @@ static enum si_sm_result kcs_event(struct si_sm_data *kcs, long time) return SI_SM_IDLE; case KCS_START_OP: - if (state != KCS_IDLE) { + if (state != KCS_IDLE_STATE) { start_error_recovery(kcs, "State machine not idle at start"); break; diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index d2e698096ace..176f1751237f 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -64,6 +64,7 @@ #include <linux/dmi.h> #include <linux/string.h> #include <linux/ctype.h> +#include <linux/pnp.h> #ifdef CONFIG_PPC_OF #include <linux/of_device.h> @@ -1919,7 +1920,7 @@ struct SPMITable { s8 spmi_id[1]; /* A '\0' terminated array starts here. */ }; -static __devinit int try_init_acpi(struct SPMITable *spmi) +static __devinit int try_init_spmi(struct SPMITable *spmi) { struct smi_info *info; u8 addr_space; @@ -1940,7 +1941,7 @@ static __devinit int try_init_acpi(struct SPMITable *spmi) return -ENOMEM; } - info->addr_source = "ACPI"; + info->addr_source = "SPMI"; /* Figure out the interface type. */ switch (spmi->InterfaceType) { @@ -2002,7 +2003,7 @@ static __devinit int try_init_acpi(struct SPMITable *spmi) return 0; } -static __devinit void acpi_find_bmc(void) +static __devinit void spmi_find_bmc(void) { acpi_status status; struct SPMITable *spmi; @@ -2020,9 +2021,106 @@ static __devinit void acpi_find_bmc(void) if (status != AE_OK) return; - try_init_acpi(spmi); + try_init_spmi(spmi); } } + +static int __devinit ipmi_pnp_probe(struct pnp_dev *dev, + const struct pnp_device_id *dev_id) +{ + struct acpi_device *acpi_dev; + struct smi_info *info; + acpi_handle handle; + acpi_status status; + unsigned long long tmp; + + acpi_dev = pnp_acpi_device(dev); + if (!acpi_dev) + return -ENODEV; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->addr_source = "ACPI"; + + handle = acpi_dev->handle; + + /* _IFT tells us the interface type: KCS, BT, etc */ + status = acpi_evaluate_integer(handle, "_IFT", NULL, &tmp); + if (ACPI_FAILURE(status)) + goto err_free; + + switch (tmp) { + case 1: + info->si_type = SI_KCS; + break; + case 2: + info->si_type = SI_SMIC; + break; + case 3: + info->si_type = SI_BT; + break; + default: + dev_info(&dev->dev, "unknown interface type %lld\n", tmp); + goto err_free; + } + + if (pnp_port_valid(dev, 0)) { + info->io_setup = port_setup; + info->io.addr_type = IPMI_IO_ADDR_SPACE; + info->io.addr_data = pnp_port_start(dev, 0); + } else if (pnp_mem_valid(dev, 0)) { + info->io_setup = mem_setup; + info->io.addr_type = IPMI_MEM_ADDR_SPACE; + info->io.addr_data = pnp_mem_start(dev, 0); + } else { + dev_err(&dev->dev, "no I/O or memory address\n"); + goto err_free; + } + + info->io.regspacing = DEFAULT_REGSPACING; + info->io.regsize = DEFAULT_REGSPACING; + info->io.regshift = 0; + + /* If _GPE exists, use it; otherwise use standard interrupts */ + status = acpi_evaluate_integer(handle, "_GPE", NULL, &tmp); + if (ACPI_SUCCESS(status)) { + info->irq = tmp; + info->irq_setup = acpi_gpe_irq_setup; + } else if (pnp_irq_valid(dev, 0)) { + info->irq = pnp_irq(dev, 0); + info->irq_setup = std_irq_setup; + } + + info->dev = &acpi_dev->dev; + pnp_set_drvdata(dev, info); + + return try_smi_init(info); + +err_free: + kfree(info); + return -EINVAL; +} + +static void __devexit ipmi_pnp_remove(struct pnp_dev *dev) +{ + struct smi_info *info = pnp_get_drvdata(dev); + + cleanup_one_si(info); +} + +static const struct pnp_device_id pnp_dev_table[] = { + {"IPI0001", 0}, + {"", 0}, +}; + +static struct pnp_driver ipmi_pnp_driver = { + .name = DEVICE_NAME, + .probe = ipmi_pnp_probe, + .remove = __devexit_p(ipmi_pnp_remove), + .id_table = pnp_dev_table, +}; #endif #ifdef CONFIG_DMI @@ -2202,7 +2300,6 @@ static int __devinit ipmi_pci_probe(struct pci_dev *pdev, int rv; int class_type = pdev->class & PCI_ERMC_CLASSCODE_TYPE_MASK; struct smi_info *info; - int first_reg_offset = 0; info = kzalloc(sizeof(*info), GFP_KERNEL); if (!info) @@ -2241,9 +2338,6 @@ static int __devinit ipmi_pci_probe(struct pci_dev *pdev, info->addr_source_cleanup = ipmi_pci_cleanup; info->addr_source_data = pdev; - if (pdev->subsystem_vendor == PCI_HP_VENDOR_ID) - first_reg_offset = 1; - if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) { info->io_setup = port_setup; info->io.addr_type = IPMI_IO_ADDR_SPACE; @@ -3108,7 +3202,10 @@ static __devinit int init_ipmi_si(void) #endif #ifdef CONFIG_ACPI - acpi_find_bmc(); + spmi_find_bmc(); +#endif +#ifdef CONFIG_ACPI + pnp_register_driver(&ipmi_pnp_driver); #endif #ifdef CONFIG_PCI @@ -3233,6 +3330,9 @@ static __exit void cleanup_ipmi_si(void) #ifdef CONFIG_PCI pci_unregister_driver(&ipmi_pci_driver); #endif +#ifdef CONFIG_ACPI + pnp_unregister_driver(&ipmi_pnp_driver); +#endif #ifdef CONFIG_PPC_OF of_unregister_platform_driver(&ipmi_of_platform_driver); diff --git a/drivers/char/isicom.c b/drivers/char/isicom.c index 426bfdd7f3e0..300d5bd6cd06 100644 --- a/drivers/char/isicom.c +++ b/drivers/char/isicom.c @@ -793,35 +793,30 @@ static inline void isicom_setup_board(struct isi_board *bp) { int channel; struct isi_port *port; - unsigned long flags; - spin_lock_irqsave(&bp->card_lock, flags); - if (bp->status & BOARD_ACTIVE) { - spin_unlock_irqrestore(&bp->card_lock, flags); - return; + bp->count++; + if (!(bp->status & BOARD_INIT)) { + port = bp->ports; + for (channel = 0; channel < bp->port_count; channel++, port++) + drop_dtr_rts(port); } - port = bp->ports; - bp->status |= BOARD_ACTIVE; - for (channel = 0; channel < bp->port_count; channel++, port++) - drop_dtr_rts(port); - spin_unlock_irqrestore(&bp->card_lock, flags); + bp->status |= BOARD_ACTIVE | BOARD_INIT; } -static int isicom_setup_port(struct tty_struct *tty) +/* Activate and thus setup board are protected from races against shutdown + by the tty_port mutex */ + +static int isicom_activate(struct tty_port *tport, struct tty_struct *tty) { - struct isi_port *port = tty->driver_data; + struct isi_port *port = container_of(tport, struct isi_port, port); struct isi_board *card = port->card; unsigned long flags; - if (port->port.flags & ASYNC_INITIALIZED) - return 0; - if (tty_port_alloc_xmit_buf(&port->port) < 0) + if (tty_port_alloc_xmit_buf(tport) < 0) return -ENOMEM; spin_lock_irqsave(&card->card_lock, flags); - clear_bit(TTY_IO_ERROR, &tty->flags); - if (port->port.count == 1) - card->count++; + isicom_setup_board(card); port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; @@ -832,9 +827,7 @@ static int isicom_setup_port(struct tty_struct *tty) outw(((ISICOM_KILLTX | ISICOM_KILLRX) << 8) | 0x06, card->base); InterruptTheCard(card->base); } - isicom_config_port(tty); - port->port.flags |= ASYNC_INITIALIZED; spin_unlock_irqrestore(&card->card_lock, flags); return 0; @@ -871,85 +864,37 @@ static struct tty_port *isicom_find_port(struct tty_struct *tty) return &port->port; } - + static int isicom_open(struct tty_struct *tty, struct file *filp) { struct isi_port *port; struct isi_board *card; struct tty_port *tport; - int error = 0; tport = isicom_find_port(tty); if (tport == NULL) return -ENODEV; port = container_of(tport, struct isi_port, port); card = &isi_card[BOARD(tty->index)]; - isicom_setup_board(card); - /* FIXME: locking on port.count etc */ - port->port.count++; - tty->driver_data = port; - tty_port_tty_set(&port->port, tty); - /* FIXME: Locking on Initialized flag */ - if (!test_bit(ASYNCB_INITIALIZED, &tport->flags)) - error = isicom_setup_port(tty); - if (error == 0) - error = tty_port_block_til_ready(&port->port, tty, filp); - return error; + return tty_port_open(tport, tty, filp); } /* close et all */ -static inline void isicom_shutdown_board(struct isi_board *bp) -{ - if (bp->status & BOARD_ACTIVE) - bp->status &= ~BOARD_ACTIVE; -} - /* card->lock HAS to be held */ static void isicom_shutdown_port(struct isi_port *port) { struct isi_board *card = port->card; - struct tty_struct *tty; - - tty = tty_port_tty_get(&port->port); - - if (!(port->port.flags & ASYNC_INITIALIZED)) { - tty_kref_put(tty); - return; - } - - tty_port_free_xmit_buf(&port->port); - port->port.flags &= ~ASYNC_INITIALIZED; - /* 3rd October 2000 : Vinayak P Risbud */ - tty_port_tty_set(&port->port, NULL); - - /*Fix done by Anil .S on 30-04-2001 - remote login through isi port has dtr toggle problem - due to which the carrier drops before the password prompt - appears on the remote end. Now we drop the dtr only if the - HUPCL(Hangup on close) flag is set for the tty*/ - - if (C_HUPCL(tty)) - /* drop dtr on this port */ - drop_dtr(port); - - /* any other port uninits */ - if (tty) - set_bit(TTY_IO_ERROR, &tty->flags); if (--card->count < 0) { pr_dbg("isicom_shutdown_port: bad board(0x%lx) count %d.\n", card->base, card->count); card->count = 0; } - - /* last port was closed, shutdown that boad too */ - if (C_HUPCL(tty)) { - if (!card->count) - isicom_shutdown_board(card); - } - tty_kref_put(tty); + /* last port was closed, shutdown that board too */ + if (!card->count) + card->status &= BOARD_ACTIVE; } static void isicom_flush_buffer(struct tty_struct *tty) @@ -968,7 +913,7 @@ static void isicom_flush_buffer(struct tty_struct *tty) tty_wakeup(tty); } -static void isicom_close_port(struct tty_port *port) +static void isicom_shutdown(struct tty_port *port) { struct isi_port *ip = container_of(port, struct isi_port, port); struct isi_board *card = ip->card; @@ -977,12 +922,11 @@ static void isicom_close_port(struct tty_port *port) /* indicate to the card that no more data can be received on this port */ spin_lock_irqsave(&card->card_lock, flags); - if (port->flags & ASYNC_INITIALIZED) { - card->port_status &= ~(1 << ip->channel); - outw(card->port_status, card->base + 0x02); - } + card->port_status &= ~(1 << ip->channel); + outw(card->port_status, card->base + 0x02); isicom_shutdown_port(ip); spin_unlock_irqrestore(&card->card_lock, flags); + tty_port_free_xmit_buf(port); } static void isicom_close(struct tty_struct *tty, struct file *filp) @@ -991,12 +935,7 @@ static void isicom_close(struct tty_struct *tty, struct file *filp) struct tty_port *port = &ip->port; if (isicom_paranoia_check(ip, tty->name, "isicom_close")) return; - - if (tty_port_close_start(port, tty, filp) == 0) - return; - isicom_close_port(port); - isicom_flush_buffer(tty); - tty_port_close_end(port, tty); + tty_port_close(port, tty, filp); } /* write et all */ @@ -1326,15 +1265,9 @@ static void isicom_start(struct tty_struct *tty) static void isicom_hangup(struct tty_struct *tty) { struct isi_port *port = tty->driver_data; - unsigned long flags; if (isicom_paranoia_check(port, tty->name, "isicom_hangup")) return; - - spin_lock_irqsave(&port->card->card_lock, flags); - isicom_shutdown_port(port); - spin_unlock_irqrestore(&port->card->card_lock, flags); - tty_port_hangup(&port->port); } @@ -1367,6 +1300,8 @@ static const struct tty_operations isicom_ops = { static const struct tty_port_operations isicom_port_ops = { .carrier_raised = isicom_carrier_raised, .dtr_rts = isicom_dtr_rts, + .activate = isicom_activate, + .shutdown = isicom_shutdown, }; static int __devinit reset_card(struct pci_dev *pdev, diff --git a/drivers/char/istallion.c b/drivers/char/istallion.c index 402838f4083e..4cd6c527ee41 100644 --- a/drivers/char/istallion.c +++ b/drivers/char/istallion.c @@ -213,7 +213,6 @@ static int stli_shared; * with the slave. Most of them need to be updated atomically, so always * use the bit setting operations (unless protected by cli/sti). */ -#define ST_INITIALIZING 1 #define ST_OPENING 2 #define ST_CLOSING 3 #define ST_CMDING 4 @@ -621,7 +620,7 @@ static int stli_brdinit(struct stlibrd *brdp); static int stli_startbrd(struct stlibrd *brdp); static ssize_t stli_memread(struct file *fp, char __user *buf, size_t count, loff_t *offp); static ssize_t stli_memwrite(struct file *fp, const char __user *buf, size_t count, loff_t *offp); -static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg); +static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg); static void stli_brdpoll(struct stlibrd *brdp, cdkhdr_t __iomem *hdrp); static void stli_poll(unsigned long arg); static int stli_hostcmd(struct stlibrd *brdp, struct stliport *portp); @@ -704,7 +703,7 @@ static const struct file_operations stli_fsiomem = { .owner = THIS_MODULE, .read = stli_memread, .write = stli_memwrite, - .ioctl = stli_memioctl, + .unlocked_ioctl = stli_memioctl, }; /*****************************************************************************/ @@ -783,13 +782,32 @@ static int stli_parsebrd(struct stlconf *confp, char **argp) /*****************************************************************************/ +/* + * On the first open of the device setup the port hardware, and + * initialize the per port data structure. Since initializing the port + * requires several commands to the board we will need to wait for any + * other open that is already initializing the port. + * + * Locking: protected by the port mutex. + */ + +static int stli_activate(struct tty_port *port, struct tty_struct *tty) +{ + struct stliport *portp = container_of(port, struct stliport, port); + struct stlibrd *brdp = stli_brds[portp->brdnr]; + int rc; + + if ((rc = stli_initopen(tty, brdp, portp)) >= 0) + clear_bit(TTY_IO_ERROR, &tty->flags); + wake_up_interruptible(&portp->raw_wait); + return rc; +} + static int stli_open(struct tty_struct *tty, struct file *filp) { struct stlibrd *brdp; struct stliport *portp; - struct tty_port *port; unsigned int minordev, brdnr, portnr; - int rc; minordev = tty->index; brdnr = MINOR2BRD(minordev); @@ -809,95 +827,56 @@ static int stli_open(struct tty_struct *tty, struct file *filp) return -ENODEV; if (portp->devnr < 1) return -ENODEV; - port = &portp->port; - -/* - * On the first open of the device setup the port hardware, and - * initialize the per port data structure. Since initializing the port - * requires several commands to the board we will need to wait for any - * other open that is already initializing the port. - * - * Review - locking - */ - tty_port_tty_set(port, tty); - tty->driver_data = portp; - port->count++; - - wait_event_interruptible(portp->raw_wait, - !test_bit(ST_INITIALIZING, &portp->state)); - if (signal_pending(current)) - return -ERESTARTSYS; - - if ((portp->port.flags & ASYNC_INITIALIZED) == 0) { - set_bit(ST_INITIALIZING, &portp->state); - if ((rc = stli_initopen(tty, brdp, portp)) >= 0) { - /* Locking */ - port->flags |= ASYNC_INITIALIZED; - clear_bit(TTY_IO_ERROR, &tty->flags); - } - clear_bit(ST_INITIALIZING, &portp->state); - wake_up_interruptible(&portp->raw_wait); - if (rc < 0) - return rc; - } - return tty_port_block_til_ready(&portp->port, tty, filp); + return tty_port_open(&portp->port, tty, filp); } + /*****************************************************************************/ -static void stli_close(struct tty_struct *tty, struct file *filp) +static void stli_shutdown(struct tty_port *port) { struct stlibrd *brdp; - struct stliport *portp; - struct tty_port *port; + unsigned long ftype; unsigned long flags; + struct stliport *portp = container_of(port, struct stliport, port); - portp = tty->driver_data; - if (portp == NULL) + if (portp->brdnr >= stli_nrbrds) return; - port = &portp->port; - - if (tty_port_close_start(port, tty, filp) == 0) + brdp = stli_brds[portp->brdnr]; + if (brdp == NULL) return; -/* - * May want to wait for data to drain before closing. The BUSY flag - * keeps track of whether we are still transmitting or not. It is - * updated by messages from the slave - indicating when all chars - * really have drained. - */ - spin_lock_irqsave(&stli_lock, flags); - if (tty == stli_txcooktty) - stli_flushchars(tty); - spin_unlock_irqrestore(&stli_lock, flags); - - /* We end up doing this twice for the moment. This needs looking at - eventually. Note we still use portp->closing_wait as a result */ - if (portp->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, portp->closing_wait); + /* + * May want to wait for data to drain before closing. The BUSY + * flag keeps track of whether we are still transmitting or not. + * It is updated by messages from the slave - indicating when all + * chars really have drained. + */ - /* FIXME: port locking here needs attending to */ - port->flags &= ~ASYNC_INITIALIZED; + if (!test_bit(ST_CLOSING, &portp->state)) + stli_rawclose(brdp, portp, 0, 0); - brdp = stli_brds[portp->brdnr]; - stli_rawclose(brdp, portp, 0, 0); - if (tty->termios->c_cflag & HUPCL) { - stli_mkasysigs(&portp->asig, 0, 0); - if (test_bit(ST_CMDING, &portp->state)) - set_bit(ST_DOSIGS, &portp->state); - else - stli_sendcmd(brdp, portp, A_SETSIGNALS, &portp->asig, - sizeof(asysigs_t), 0); - } + spin_lock_irqsave(&stli_lock, flags); clear_bit(ST_TXBUSY, &portp->state); clear_bit(ST_RXSTOP, &portp->state); - set_bit(TTY_IO_ERROR, &tty->flags); - tty_ldisc_flush(tty); - set_bit(ST_DOFLUSHRX, &portp->state); - stli_flushbuffer(tty); + spin_unlock_irqrestore(&stli_lock, flags); - tty_port_close_end(port, tty); - tty_port_tty_set(port, NULL); + ftype = FLUSHTX | FLUSHRX; + stli_cmdwait(brdp, portp, A_FLUSH, &ftype, sizeof(u32), 0); +} + +static void stli_close(struct tty_struct *tty, struct file *filp) +{ + struct stliport *portp = tty->driver_data; + unsigned long flags; + if (portp == NULL) + return; + spin_lock_irqsave(&stli_lock, flags); + /* Flush any internal buffering out first */ + if (tty == stli_txcooktty) + stli_flushchars(tty); + spin_unlock_irqrestore(&stli_lock, flags); + tty_port_close(&portp->port, tty, filp); } /*****************************************************************************/ @@ -1724,6 +1703,7 @@ static void stli_start(struct tty_struct *tty) /*****************************************************************************/ + /* * Hangup this port. This is pretty much like closing the port, only * a little more brutal. No waiting for data to drain. Shutdown the @@ -1733,47 +1713,8 @@ static void stli_start(struct tty_struct *tty) static void stli_hangup(struct tty_struct *tty) { - struct stliport *portp; - struct stlibrd *brdp; - struct tty_port *port; - unsigned long flags; - - portp = tty->driver_data; - if (portp == NULL) - return; - if (portp->brdnr >= stli_nrbrds) - return; - brdp = stli_brds[portp->brdnr]; - if (brdp == NULL) - return; - port = &portp->port; - - spin_lock_irqsave(&port->lock, flags); - port->flags &= ~ASYNC_INITIALIZED; - spin_unlock_irqrestore(&port->lock, flags); - - if (!test_bit(ST_CLOSING, &portp->state)) - stli_rawclose(brdp, portp, 0, 0); - - spin_lock_irqsave(&stli_lock, flags); - if (tty->termios->c_cflag & HUPCL) { - stli_mkasysigs(&portp->asig, 0, 0); - if (test_bit(ST_CMDING, &portp->state)) { - set_bit(ST_DOSIGS, &portp->state); - set_bit(ST_DOFLUSHTX, &portp->state); - set_bit(ST_DOFLUSHRX, &portp->state); - } else { - stli_sendcmd(brdp, portp, A_SETSIGNALSF, - &portp->asig, sizeof(asysigs_t), 0); - } - } - - clear_bit(ST_TXBUSY, &portp->state); - clear_bit(ST_RXSTOP, &portp->state); - set_bit(TTY_IO_ERROR, &tty->flags); - spin_unlock_irqrestore(&stli_lock, flags); - - tty_port_hangup(port); + struct stliport *portp = tty->driver_data; + tty_port_hangup(&portp->port); } /*****************************************************************************/ @@ -4311,7 +4252,7 @@ static int stli_getbrdstruct(struct stlibrd __user *arg) * reset it, and start/stop it. */ -static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg) +static long stli_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) { struct stlibrd *brdp; int brdnr, rc, done; @@ -4356,7 +4297,7 @@ static int stli_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, un * Now handle the board specific ioctls. These all depend on the * minor number of the device they were called from. */ - brdnr = iminor(ip); + brdnr = iminor(fp->f_dentry->d_inode); if (brdnr >= STL_MAXBRDS) return -ENODEV; brdp = stli_brds[brdnr]; @@ -4420,6 +4361,8 @@ static const struct tty_operations stli_ops = { static const struct tty_port_operations stli_port_ops = { .carrier_raised = stli_carrier_raised, .dtr_rts = stli_dtr_rts, + .activate = stli_activate, + .shutdown = stli_shutdown, }; /*****************************************************************************/ diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c index 5619007e7e05..f706b1dffdb3 100644 --- a/drivers/char/keyboard.c +++ b/drivers/char/keyboard.c @@ -233,7 +233,8 @@ int setkeycode(unsigned int scancode, unsigned int keycode) } /* - * Making beeps and bells. + * Making beeps and bells. Note that we prefer beeps to bells, but when + * shutting the sound off we do both. */ static int kd_sound_helper(struct input_handle *handle, void *data) @@ -242,9 +243,12 @@ static int kd_sound_helper(struct input_handle *handle, void *data) struct input_dev *dev = handle->dev; if (test_bit(EV_SND, dev->evbit)) { - if (test_bit(SND_TONE, dev->sndbit)) + if (test_bit(SND_TONE, dev->sndbit)) { input_inject_event(handle, EV_SND, SND_TONE, *hz); - if (test_bit(SND_BELL, handle->dev->sndbit)) + if (*hz) + return 0; + } + if (test_bit(SND_BELL, dev->sndbit)) input_inject_event(handle, EV_SND, SND_BELL, *hz ? 1 : 0); } diff --git a/drivers/char/lp.c b/drivers/char/lp.c index e444c2dba160..938a3a273886 100644 --- a/drivers/char/lp.c +++ b/drivers/char/lp.c @@ -127,6 +127,7 @@ #include <linux/wait.h> #include <linux/jiffies.h> #include <linux/smp_lock.h> +#include <linux/compat.h> #include <linux/parport.h> #undef LP_STATS @@ -571,13 +572,11 @@ static int lp_release(struct inode * inode, struct file * file) return 0; } -static int lp_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg) +static int lp_do_ioctl(unsigned int minor, unsigned int cmd, + unsigned long arg, void __user *argp) { - unsigned int minor = iminor(inode); int status; int retval = 0; - void __user *argp = (void __user *)arg; #ifdef LP_DEBUG printk(KERN_DEBUG "lp%d ioctl, cmd: 0x%x, arg: 0x%lx\n", minor, cmd, arg); @@ -587,9 +586,6 @@ static int lp_ioctl(struct inode *inode, struct file *file, if ((LP_F(minor) & LP_EXIST) == 0) return -ENODEV; switch ( cmd ) { - struct timeval par_timeout; - long to_jiffies; - case LPTIME: LP_TIME(minor) = arg * HZ/100; break; @@ -652,34 +648,101 @@ static int lp_ioctl(struct inode *inode, struct file *file, return -EFAULT; break; - case LPSETTIMEOUT: - if (copy_from_user (&par_timeout, argp, - sizeof (struct timeval))) { - return -EFAULT; - } - /* Convert to jiffies, place in lp_table */ - if ((par_timeout.tv_sec < 0) || - (par_timeout.tv_usec < 0)) { - return -EINVAL; - } - to_jiffies = DIV_ROUND_UP(par_timeout.tv_usec, 1000000/HZ); - to_jiffies += par_timeout.tv_sec * (long) HZ; - if (to_jiffies <= 0) { - return -EINVAL; - } - lp_table[minor].timeout = to_jiffies; - break; - default: retval = -EINVAL; } return retval; } +static int lp_set_timeout(unsigned int minor, struct timeval *par_timeout) +{ + long to_jiffies; + + /* Convert to jiffies, place in lp_table */ + if ((par_timeout->tv_sec < 0) || + (par_timeout->tv_usec < 0)) { + return -EINVAL; + } + to_jiffies = DIV_ROUND_UP(par_timeout->tv_usec, 1000000/HZ); + to_jiffies += par_timeout->tv_sec * (long) HZ; + if (to_jiffies <= 0) { + return -EINVAL; + } + lp_table[minor].timeout = to_jiffies; + return 0; +} + +static long lp_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + unsigned int minor; + struct timeval par_timeout; + int ret; + + minor = iminor(file->f_path.dentry->d_inode); + lock_kernel(); + switch (cmd) { + case LPSETTIMEOUT: + if (copy_from_user(&par_timeout, (void __user *)arg, + sizeof (struct timeval))) { + ret = -EFAULT; + break; + } + ret = lp_set_timeout(minor, &par_timeout); + break; + default: + ret = lp_do_ioctl(minor, cmd, arg, (void __user *)arg); + break; + } + unlock_kernel(); + + return ret; +} + +#ifdef CONFIG_COMPAT +static long lp_compat_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + unsigned int minor; + struct timeval par_timeout; + struct compat_timeval __user *tc; + int ret; + + minor = iminor(file->f_path.dentry->d_inode); + lock_kernel(); + switch (cmd) { + case LPSETTIMEOUT: + tc = compat_ptr(arg); + if (get_user(par_timeout.tv_sec, &tc->tv_sec) || + get_user(par_timeout.tv_usec, &tc->tv_usec)) { + ret = -EFAULT; + break; + } + ret = lp_set_timeout(minor, &par_timeout); + break; +#ifdef LP_STATS + case LPGETSTATS: + /* FIXME: add an implementation if you set LP_STATS */ + ret = -EINVAL; + break; +#endif + default: + ret = lp_do_ioctl(minor, cmd, arg, compat_ptr(arg)); + break; + } + unlock_kernel(); + + return ret; +} +#endif + static const struct file_operations lp_fops = { .owner = THIS_MODULE, .write = lp_write, - .ioctl = lp_ioctl, + .unlocked_ioctl = lp_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = lp_compat_ioctl, +#endif .open = lp_open, .release = lp_release, #ifdef CONFIG_PARPORT_1284 diff --git a/drivers/char/mem.c b/drivers/char/mem.c index 30eff80fed6f..be832b6f8279 100644 --- a/drivers/char/mem.c +++ b/drivers/char/mem.c @@ -34,6 +34,16 @@ # include <linux/efi.h> #endif +static inline unsigned long size_inside_page(unsigned long start, + unsigned long size) +{ + unsigned long sz; + + sz = PAGE_SIZE - (start & (PAGE_SIZE - 1)); + + return min(sz, size); +} + /* * Architectures vary in how they handle caching for addresses * outside of main memory. @@ -43,7 +53,7 @@ static inline int uncached_access(struct file *file, unsigned long addr) { #if defined(CONFIG_IA64) /* - * On ia64, we ignore O_SYNC because we cannot tolerate memory attribute aliases. + * On ia64, we ignore O_DSYNC because we cannot tolerate memory attribute aliases. */ return !(efi_mem_attributes(addr) & EFI_MEMORY_WB); #elif defined(CONFIG_MIPS) @@ -56,9 +66,9 @@ static inline int uncached_access(struct file *file, unsigned long addr) #else /* * Accessing memory above the top the kernel knows about or through a file pointer - * that was marked O_SYNC will be done non-cached. + * that was marked O_DSYNC will be done non-cached. */ - if (file->f_flags & O_SYNC) + if (file->f_flags & O_DSYNC) return 1; return addr >= __pa(high_memory); #endif @@ -126,9 +136,7 @@ static ssize_t read_mem(struct file * file, char __user * buf, #ifdef __ARCH_HAS_NO_PAGE_ZERO_MAPPED /* we don't have page 0 mapped on sparc and m68k.. */ if (p < PAGE_SIZE) { - sz = PAGE_SIZE - p; - if (sz > count) - sz = count; + sz = size_inside_page(p, count); if (sz > 0) { if (clear_user(buf, sz)) return -EFAULT; @@ -141,15 +149,9 @@ static ssize_t read_mem(struct file * file, char __user * buf, #endif while (count > 0) { - /* - * Handle first page in case it's not aligned - */ - if (-p & (PAGE_SIZE - 1)) - sz = -p & (PAGE_SIZE - 1); - else - sz = PAGE_SIZE; + unsigned long remaining; - sz = min_t(unsigned long, sz, count); + sz = size_inside_page(p, count); if (!range_is_allowed(p >> PAGE_SHIFT, count)) return -EPERM; @@ -163,12 +165,10 @@ static ssize_t read_mem(struct file * file, char __user * buf, if (!ptr) return -EFAULT; - if (copy_to_user(buf, ptr, sz)) { - unxlate_dev_mem_ptr(p, ptr); - return -EFAULT; - } - + remaining = copy_to_user(buf, ptr, sz); unxlate_dev_mem_ptr(p, ptr); + if (remaining) + return -EFAULT; buf += sz; p += sz; @@ -196,9 +196,7 @@ static ssize_t write_mem(struct file * file, const char __user * buf, #ifdef __ARCH_HAS_NO_PAGE_ZERO_MAPPED /* we don't have page 0 mapped on sparc and m68k.. */ if (p < PAGE_SIZE) { - unsigned long sz = PAGE_SIZE - p; - if (sz > count) - sz = count; + sz = size_inside_page(p, count); /* Hmm. Do something? */ buf += sz; p += sz; @@ -208,15 +206,7 @@ static ssize_t write_mem(struct file * file, const char __user * buf, #endif while (count > 0) { - /* - * Handle first page in case it's not aligned - */ - if (-p & (PAGE_SIZE - 1)) - sz = -p & (PAGE_SIZE - 1); - else - sz = PAGE_SIZE; - - sz = min_t(unsigned long, sz, count); + sz = size_inside_page(p, count); if (!range_is_allowed(p >> PAGE_SHIFT, sz)) return -EPERM; @@ -234,16 +224,14 @@ static ssize_t write_mem(struct file * file, const char __user * buf, } copied = copy_from_user(ptr, buf, sz); + unxlate_dev_mem_ptr(p, ptr); if (copied) { written += sz - copied; - unxlate_dev_mem_ptr(p, ptr); if (written) break; return -EFAULT; } - unxlate_dev_mem_ptr(p, ptr); - buf += sz; p += sz; count -= sz; @@ -417,27 +405,18 @@ static ssize_t read_kmem(struct file *file, char __user *buf, #ifdef __ARCH_HAS_NO_PAGE_ZERO_MAPPED /* we don't have page 0 mapped on sparc and m68k.. */ if (p < PAGE_SIZE && low_count > 0) { - size_t tmp = PAGE_SIZE - p; - if (tmp > low_count) tmp = low_count; - if (clear_user(buf, tmp)) + sz = size_inside_page(p, low_count); + if (clear_user(buf, sz)) return -EFAULT; - buf += tmp; - p += tmp; - read += tmp; - low_count -= tmp; - count -= tmp; + buf += sz; + p += sz; + read += sz; + low_count -= sz; + count -= sz; } #endif while (low_count > 0) { - /* - * Handle first page in case it's not aligned - */ - if (-p & (PAGE_SIZE - 1)) - sz = -p & (PAGE_SIZE - 1); - else - sz = PAGE_SIZE; - - sz = min_t(unsigned long, sz, low_count); + sz = size_inside_page(p, low_count); /* * On ia64 if a page has been mapped somewhere as @@ -461,21 +440,18 @@ static ssize_t read_kmem(struct file *file, char __user *buf, if (!kbuf) return -ENOMEM; while (count > 0) { - int len = count; - - if (len > PAGE_SIZE) - len = PAGE_SIZE; - len = vread(kbuf, (char *)p, len); - if (!len) + sz = size_inside_page(p, count); + sz = vread(kbuf, (char *)p, sz); + if (!sz) break; - if (copy_to_user(buf, kbuf, len)) { + if (copy_to_user(buf, kbuf, sz)) { free_page((unsigned long)kbuf); return -EFAULT; } - count -= len; - buf += len; - read += len; - p += len; + count -= sz; + buf += sz; + read += sz; + p += sz; } free_page((unsigned long)kbuf); } @@ -485,7 +461,7 @@ static ssize_t read_kmem(struct file *file, char __user *buf, static inline ssize_t -do_write_kmem(void *p, unsigned long realp, const char __user * buf, +do_write_kmem(unsigned long p, const char __user *buf, size_t count, loff_t *ppos) { ssize_t written, sz; @@ -494,14 +470,11 @@ do_write_kmem(void *p, unsigned long realp, const char __user * buf, written = 0; #ifdef __ARCH_HAS_NO_PAGE_ZERO_MAPPED /* we don't have page 0 mapped on sparc and m68k.. */ - if (realp < PAGE_SIZE) { - unsigned long sz = PAGE_SIZE - realp; - if (sz > count) - sz = count; + if (p < PAGE_SIZE) { + sz = size_inside_page(p, count); /* Hmm. Do something? */ buf += sz; p += sz; - realp += sz; count -= sz; written += sz; } @@ -509,22 +482,15 @@ do_write_kmem(void *p, unsigned long realp, const char __user * buf, while (count > 0) { char *ptr; - /* - * Handle first page in case it's not aligned - */ - if (-realp & (PAGE_SIZE - 1)) - sz = -realp & (PAGE_SIZE - 1); - else - sz = PAGE_SIZE; - sz = min_t(unsigned long, sz, count); + sz = size_inside_page(p, count); /* * On ia64 if a page has been mapped somewhere as * uncached, then it must also be accessed uncached * by the kernel or data corruption may occur */ - ptr = xlate_dev_kmem_ptr(p); + ptr = xlate_dev_kmem_ptr((char *)p); copied = copy_from_user(ptr, buf, sz); if (copied) { @@ -535,7 +501,6 @@ do_write_kmem(void *p, unsigned long realp, const char __user * buf, } buf += sz; p += sz; - realp += sz; count -= sz; written += sz; } @@ -554,19 +519,14 @@ static ssize_t write_kmem(struct file * file, const char __user * buf, unsigned long p = *ppos; ssize_t wrote = 0; ssize_t virtr = 0; - ssize_t written; char * kbuf; /* k-addr because vwrite() takes vmlist_lock rwlock */ if (p < (unsigned long) high_memory) { - - wrote = count; - if (count > (unsigned long) high_memory - p) - wrote = (unsigned long) high_memory - p; - - written = do_write_kmem((void*)p, p, buf, wrote, ppos); - if (written != wrote) - return written; - wrote = written; + unsigned long to_write = min_t(unsigned long, count, + (unsigned long)high_memory - p); + wrote = do_write_kmem(p, buf, to_write, ppos); + if (wrote != to_write) + return wrote; p += wrote; buf += wrote; count -= wrote; @@ -577,24 +537,21 @@ static ssize_t write_kmem(struct file * file, const char __user * buf, if (!kbuf) return wrote ? wrote : -ENOMEM; while (count > 0) { - int len = count; - - if (len > PAGE_SIZE) - len = PAGE_SIZE; - if (len) { - written = copy_from_user(kbuf, buf, len); - if (written) { - if (wrote + virtr) - break; - free_page((unsigned long)kbuf); - return -EFAULT; - } + unsigned long sz = size_inside_page(p, count); + unsigned long n; + + n = copy_from_user(kbuf, buf, sz); + if (n) { + if (wrote + virtr) + break; + free_page((unsigned long)kbuf); + return -EFAULT; } - len = vwrite(kbuf, (char *)p, len); - count -= len; - buf += len; - virtr += len; - p += len; + sz = vwrite(kbuf, (char *)p, sz); + count -= sz; + buf += sz; + virtr += sz; + p += sz; } free_page((unsigned long)kbuf); } diff --git a/drivers/char/misc.c b/drivers/char/misc.c index 96f1cd086dd2..94a136e96c06 100644 --- a/drivers/char/misc.c +++ b/drivers/char/misc.c @@ -60,9 +60,7 @@ static DEFINE_MUTEX(misc_mtx); * Assigned numbers, used for dynamic minors */ #define DYNAMIC_MINORS 64 /* like dynamic majors */ -static unsigned char misc_minors[DYNAMIC_MINORS / 8]; - -extern int pmu_device_init(void); +static DECLARE_BITMAP(misc_minors, DYNAMIC_MINORS); #ifdef CONFIG_PROC_FS static void *misc_seq_start(struct seq_file *seq, loff_t *pos) @@ -198,24 +196,23 @@ int misc_register(struct miscdevice * misc) } if (misc->minor == MISC_DYNAMIC_MINOR) { - int i = DYNAMIC_MINORS; - while (--i >= 0) - if ( (misc_minors[i>>3] & (1 << (i&7))) == 0) - break; - if (i<0) { + int i = find_first_zero_bit(misc_minors, DYNAMIC_MINORS); + if (i >= DYNAMIC_MINORS) { mutex_unlock(&misc_mtx); return -EBUSY; } - misc->minor = i; + misc->minor = DYNAMIC_MINORS - i - 1; + set_bit(i, misc_minors); } - if (misc->minor < DYNAMIC_MINORS) - misc_minors[misc->minor >> 3] |= 1 << (misc->minor & 7); dev = MKDEV(MISC_MAJOR, misc->minor); misc->this_device = device_create(misc_class, misc->parent, dev, misc, "%s", misc->name); if (IS_ERR(misc->this_device)) { + int i = DYNAMIC_MINORS - misc->minor - 1; + if (i < DYNAMIC_MINORS && i >= 0) + clear_bit(i, misc_minors); err = PTR_ERR(misc->this_device); goto out; } @@ -242,7 +239,7 @@ int misc_register(struct miscdevice * misc) int misc_deregister(struct miscdevice *misc) { - int i = misc->minor; + int i = DYNAMIC_MINORS - misc->minor - 1; if (list_empty(&misc->list)) return -EINVAL; @@ -250,9 +247,8 @@ int misc_deregister(struct miscdevice *misc) mutex_lock(&misc_mtx); list_del(&misc->list); device_destroy(misc_class, MKDEV(MISC_MAJOR, misc->minor)); - if (i < DYNAMIC_MINORS && i>0) { - misc_minors[i>>3] &= ~(1 << (misc->minor & 7)); - } + if (i < DYNAMIC_MINORS && i >= 0) + clear_bit(i, misc_minors); mutex_unlock(&misc_mtx); return 0; } diff --git a/drivers/char/moxa.c b/drivers/char/moxa.c index dd0083bbb64a..63ee3bbc1ce4 100644 --- a/drivers/char/moxa.c +++ b/drivers/char/moxa.c @@ -34,7 +34,6 @@ #include <linux/tty.h> #include <linux/tty_flip.h> #include <linux/major.h> -#include <linux/smp_lock.h> #include <linux/string.h> #include <linux/fcntl.h> #include <linux/ptrace.h> @@ -139,7 +138,7 @@ struct moxa_port { int cflag; unsigned long statusflags; - u8 DCDState; + u8 DCDState; /* Protected by the port lock */ u8 lineCtrl; u8 lowChkFlag; }; @@ -151,10 +150,9 @@ struct mon_str { }; /* statusflags */ -#define TXSTOPPED 0x1 -#define LOWWAIT 0x2 -#define EMPTYWAIT 0x4 -#define THROTTLE 0x8 +#define TXSTOPPED 1 +#define LOWWAIT 2 +#define EMPTYWAIT 3 #define SERIAL_DO_RESTART @@ -165,6 +163,7 @@ static struct mon_str moxaLog; static unsigned int moxaFuncTout = HZ / 2; static unsigned int moxaLowWaterChk; static DEFINE_MUTEX(moxa_openlock); +static DEFINE_SPINLOCK(moxa_lock); /* Variables for insmod */ #ifdef MODULE static unsigned long baseaddr[MAX_BOARDS]; @@ -194,8 +193,6 @@ static int moxa_write(struct tty_struct *, const unsigned char *, int); static int moxa_write_room(struct tty_struct *); static void moxa_flush_buffer(struct tty_struct *); static int moxa_chars_in_buffer(struct tty_struct *); -static void moxa_throttle(struct tty_struct *); -static void moxa_unthrottle(struct tty_struct *); static void moxa_set_termios(struct tty_struct *, struct ktermios *); static void moxa_stop(struct tty_struct *); static void moxa_start(struct tty_struct *); @@ -205,9 +202,9 @@ static int moxa_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static void moxa_poll(unsigned long); static void moxa_set_tty_param(struct tty_struct *, struct ktermios *); -static void moxa_setup_empty_event(struct tty_struct *); -static void moxa_shut_down(struct tty_struct *); +static void moxa_shutdown(struct tty_port *); static int moxa_carrier_raised(struct tty_port *); +static void moxa_dtr_rts(struct tty_port *, int); /* * moxa board interface functions: */ @@ -234,6 +231,8 @@ static void MoxaSetFifo(struct moxa_port *port, int enable); * I/O functions */ +static DEFINE_SPINLOCK(moxafunc_lock); + static void moxa_wait_finish(void __iomem *ofsAddr) { unsigned long end = jiffies + moxaFuncTout; @@ -247,9 +246,25 @@ static void moxa_wait_finish(void __iomem *ofsAddr) static void moxafunc(void __iomem *ofsAddr, u16 cmd, u16 arg) { + unsigned long flags; + spin_lock_irqsave(&moxafunc_lock, flags); writew(arg, ofsAddr + FuncArg); writew(cmd, ofsAddr + FuncCode); moxa_wait_finish(ofsAddr); + spin_unlock_irqrestore(&moxafunc_lock, flags); +} + +static int moxafuncret(void __iomem *ofsAddr, u16 cmd, u16 arg) +{ + unsigned long flags; + u16 ret; + spin_lock_irqsave(&moxafunc_lock, flags); + writew(arg, ofsAddr + FuncArg); + writew(cmd, ofsAddr + FuncCode); + moxa_wait_finish(ofsAddr); + ret = readw(ofsAddr + FuncArg); + spin_unlock_irqrestore(&moxafunc_lock, flags); + return ret; } static void moxa_low_water_check(void __iomem *ofsAddr) @@ -299,22 +314,20 @@ static int moxa_ioctl(struct tty_struct *tty, struct file *file, struct moxa_port *p; unsigned int i, j; - mutex_lock(&moxa_openlock); for (i = 0; i < MAX_BOARDS; i++) { p = moxa_boards[i].ports; for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) { memset(&tmp, 0, sizeof(tmp)); + spin_lock_bh(&moxa_lock); if (moxa_boards[i].ready) { tmp.inq = MoxaPortRxQueue(p); tmp.outq = MoxaPortTxQueue(p); } - if (copy_to_user(argm, &tmp, sizeof(tmp))) { - mutex_unlock(&moxa_openlock); + spin_unlock_bh(&moxa_lock); + if (copy_to_user(argm, &tmp, sizeof(tmp))) return -EFAULT; - } } } - mutex_unlock(&moxa_openlock); break; } case MOXA_GET_OQUEUE: status = MoxaPortTxQueue(ch); @@ -330,16 +343,20 @@ static int moxa_ioctl(struct tty_struct *tty, struct file *file, struct moxa_port *p; unsigned int i, j; - mutex_lock(&moxa_openlock); for (i = 0; i < MAX_BOARDS; i++) { p = moxa_boards[i].ports; for (j = 0; j < MAX_PORTS_PER_BOARD; j++, p++, argm++) { struct tty_struct *ttyp; memset(&tmp, 0, sizeof(tmp)); - if (!moxa_boards[i].ready) + spin_lock_bh(&moxa_lock); + if (!moxa_boards[i].ready) { + spin_unlock_bh(&moxa_lock); goto copy; + } status = MoxaPortLineStatus(p); + spin_unlock_bh(&moxa_lock); + if (status & 1) tmp.cts = 1; if (status & 2) @@ -354,24 +371,21 @@ static int moxa_ioctl(struct tty_struct *tty, struct file *file, tmp.cflag = ttyp->termios->c_cflag; tty_kref_put(tty); copy: - if (copy_to_user(argm, &tmp, sizeof(tmp))) { - mutex_unlock(&moxa_openlock); + if (copy_to_user(argm, &tmp, sizeof(tmp))) return -EFAULT; - } } } - mutex_unlock(&moxa_openlock); break; } case TIOCGSERIAL: - mutex_lock(&moxa_openlock); + mutex_lock(&ch->port.mutex); ret = moxa_get_serial_info(ch, argp); - mutex_unlock(&moxa_openlock); + mutex_unlock(&ch->port.mutex); break; case TIOCSSERIAL: - mutex_lock(&moxa_openlock); + mutex_lock(&ch->port.mutex); ret = moxa_set_serial_info(ch, argp); - mutex_unlock(&moxa_openlock); + mutex_unlock(&ch->port.mutex); break; default: ret = -ENOIOCTLCMD; @@ -396,8 +410,6 @@ static const struct tty_operations moxa_ops = { .flush_buffer = moxa_flush_buffer, .chars_in_buffer = moxa_chars_in_buffer, .ioctl = moxa_ioctl, - .throttle = moxa_throttle, - .unthrottle = moxa_unthrottle, .set_termios = moxa_set_termios, .stop = moxa_stop, .start = moxa_start, @@ -409,11 +421,12 @@ static const struct tty_operations moxa_ops = { static const struct tty_port_operations moxa_port_ops = { .carrier_raised = moxa_carrier_raised, + .dtr_rts = moxa_dtr_rts, + .shutdown = moxa_shutdown, }; static struct tty_driver *moxaDriver; static DEFINE_TIMER(moxaTimer, moxa_poll, 0, 0); -static DEFINE_SPINLOCK(moxa_lock); /* * HW init @@ -1112,14 +1125,12 @@ static void __exit moxa_exit(void) module_init(moxa_init); module_exit(moxa_exit); -static void moxa_close_port(struct tty_struct *tty) +static void moxa_shutdown(struct tty_port *port) { - struct moxa_port *ch = tty->driver_data; - moxa_shut_down(tty); + struct moxa_port *ch = container_of(port, struct moxa_port, port); + MoxaPortDisable(ch); MoxaPortFlushData(ch, 2); - ch->port.flags &= ~ASYNC_NORMAL_ACTIVE; - tty->driver_data = NULL; - tty_port_tty_set(&ch->port, NULL); + clear_bit(ASYNCB_NORMAL_ACTIVE, &port->flags); } static int moxa_carrier_raised(struct tty_port *port) @@ -1127,45 +1138,19 @@ static int moxa_carrier_raised(struct tty_port *port) struct moxa_port *ch = container_of(port, struct moxa_port, port); int dcd; - spin_lock_bh(&moxa_lock); + spin_lock_irq(&port->lock); dcd = ch->DCDState; - spin_unlock_bh(&moxa_lock); + spin_unlock_irq(&port->lock); return dcd; } -static int moxa_block_till_ready(struct tty_struct *tty, struct file *filp, - struct moxa_port *ch) +static void moxa_dtr_rts(struct tty_port *port, int onoff) { - struct tty_port *port = &ch->port; - DEFINE_WAIT(wait); - int retval = 0; - u8 dcd; - - while (1) { - prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp)) { -#ifdef SERIAL_DO_RESTART - retval = -ERESTARTSYS; -#else - retval = -EAGAIN; -#endif - break; - } - dcd = tty_port_carrier_raised(port); - if (dcd) - break; - - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - schedule(); - } - finish_wait(&port->open_wait, &wait); - - return retval; + struct moxa_port *ch = container_of(port, struct moxa_port, port); + MoxaPortLineCtrl(ch, onoff, onoff); } + static int moxa_open(struct tty_struct *tty, struct file *filp) { struct moxa_board_conf *brd; @@ -1194,6 +1179,7 @@ static int moxa_open(struct tty_struct *tty, struct file *filp) ch->port.count++; tty->driver_data = ch; tty_port_tty_set(&ch->port, tty); + mutex_lock(&ch->port.mutex); if (!(ch->port.flags & ASYNC_INITIALIZED)) { ch->statusflags = 0; moxa_set_tty_param(tty, tty->termios); @@ -1202,58 +1188,20 @@ static int moxa_open(struct tty_struct *tty, struct file *filp) MoxaSetFifo(ch, ch->type == PORT_16550A); ch->port.flags |= ASYNC_INITIALIZED; } + mutex_unlock(&ch->port.mutex); mutex_unlock(&moxa_openlock); - retval = 0; - if (!(filp->f_flags & O_NONBLOCK) && !C_CLOCAL(tty)) - retval = moxa_block_till_ready(tty, filp, ch); - mutex_lock(&moxa_openlock); - if (retval) { - if (ch->port.count) /* 0 means already hung up... */ - if (--ch->port.count == 0) - moxa_close_port(tty); - } else - ch->port.flags |= ASYNC_NORMAL_ACTIVE; - mutex_unlock(&moxa_openlock); - + retval = tty_port_block_til_ready(&ch->port, tty, filp); + if (retval == 0) + set_bit(ASYNCB_NORMAL_ACTIVE, &ch->port.flags); return retval; } static void moxa_close(struct tty_struct *tty, struct file *filp) { - struct moxa_port *ch; - int port; - - port = tty->index; - if (port == MAX_PORTS || tty_hung_up_p(filp)) - return; - - mutex_lock(&moxa_openlock); - ch = tty->driver_data; - if (ch == NULL) - goto unlock; - if (tty->count == 1 && ch->port.count != 1) { - printk(KERN_WARNING "moxa_close: bad serial port count; " - "tty->count is 1, ch->port.count is %d\n", ch->port.count); - ch->port.count = 1; - } - if (--ch->port.count < 0) { - printk(KERN_WARNING "moxa_close: bad serial port count, " - "device=%s\n", tty->name); - ch->port.count = 0; - } - if (ch->port.count) - goto unlock; - + struct moxa_port *ch = tty->driver_data; ch->cflag = tty->termios->c_cflag; - if (ch->port.flags & ASYNC_INITIALIZED) { - moxa_setup_empty_event(tty); - tty_wait_until_sent(tty, 30 * HZ); /* 30 seconds timeout */ - } - - moxa_close_port(tty); -unlock: - mutex_unlock(&moxa_openlock); + tty_port_close(&ch->port, tty, filp); } static int moxa_write(struct tty_struct *tty, @@ -1269,7 +1217,7 @@ static int moxa_write(struct tty_struct *tty, len = MoxaPortWriteData(tty, buf, count); spin_unlock_bh(&moxa_lock); - ch->statusflags |= LOWWAIT; + set_bit(LOWWAIT, &ch->statusflags); return len; } @@ -1300,40 +1248,21 @@ static int moxa_chars_in_buffer(struct tty_struct *tty) struct moxa_port *ch = tty->driver_data; int chars; - /* - * Sigh...I have to check if driver_data is NULL here, because - * if an open() fails, the TTY subsystem eventually calls - * tty_wait_until_sent(), which calls the driver's chars_in_buffer() - * routine. And since the open() failed, we return 0 here. TDJ - */ - if (ch == NULL) - return 0; - lock_kernel(); chars = MoxaPortTxQueue(ch); - if (chars) { + if (chars) /* * Make it possible to wakeup anything waiting for output * in tty_ioctl.c, etc. */ - if (!(ch->statusflags & EMPTYWAIT)) - moxa_setup_empty_event(tty); - } - unlock_kernel(); + set_bit(EMPTYWAIT, &ch->statusflags); return chars; } static int moxa_tiocmget(struct tty_struct *tty, struct file *file) { - struct moxa_port *ch; + struct moxa_port *ch = tty->driver_data; int flag = 0, dtr, rts; - mutex_lock(&moxa_openlock); - ch = tty->driver_data; - if (!ch) { - mutex_unlock(&moxa_openlock); - return -EINVAL; - } - MoxaPortGetLineOut(ch, &dtr, &rts); if (dtr) flag |= TIOCM_DTR; @@ -1346,7 +1275,6 @@ static int moxa_tiocmget(struct tty_struct *tty, struct file *file) flag |= TIOCM_DSR; if (dtr & 4) flag |= TIOCM_CD; - mutex_unlock(&moxa_openlock); return flag; } @@ -1379,20 +1307,6 @@ static int moxa_tiocmset(struct tty_struct *tty, struct file *file, return 0; } -static void moxa_throttle(struct tty_struct *tty) -{ - struct moxa_port *ch = tty->driver_data; - - ch->statusflags |= THROTTLE; -} - -static void moxa_unthrottle(struct tty_struct *tty) -{ - struct moxa_port *ch = tty->driver_data; - - ch->statusflags &= ~THROTTLE; -} - static void moxa_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { @@ -1412,7 +1326,7 @@ static void moxa_stop(struct tty_struct *tty) if (ch == NULL) return; MoxaPortTxDisable(ch); - ch->statusflags |= TXSTOPPED; + set_bit(TXSTOPPED, &ch->statusflags); } @@ -1427,38 +1341,32 @@ static void moxa_start(struct tty_struct *tty) return; MoxaPortTxEnable(ch); - ch->statusflags &= ~TXSTOPPED; + clear_bit(TXSTOPPED, &ch->statusflags); } static void moxa_hangup(struct tty_struct *tty) { - struct moxa_port *ch; - - mutex_lock(&moxa_openlock); - ch = tty->driver_data; - if (ch == NULL) { - mutex_unlock(&moxa_openlock); - return; - } - ch->port.count = 0; - moxa_close_port(tty); - mutex_unlock(&moxa_openlock); - - wake_up_interruptible(&ch->port.open_wait); + struct moxa_port *ch = tty->driver_data; + tty_port_hangup(&ch->port); } static void moxa_new_dcdstate(struct moxa_port *p, u8 dcd) { struct tty_struct *tty; + unsigned long flags; dcd = !!dcd; + spin_lock_irqsave(&p->port.lock, flags); if (dcd != p->DCDState) { + p->DCDState = dcd; + spin_unlock_irqrestore(&p->port.lock, flags); tty = tty_port_tty_get(&p->port); if (tty && C_CLOCAL(tty) && !dcd) tty_hangup(tty); tty_kref_put(tty); } - p->DCDState = dcd; + else + spin_unlock_irqrestore(&p->port.lock, flags); } static int moxa_poll_port(struct moxa_port *p, unsigned int handle, @@ -1470,24 +1378,24 @@ static int moxa_poll_port(struct moxa_port *p, unsigned int handle, u16 intr; if (tty) { - if ((p->statusflags & EMPTYWAIT) && + if (test_bit(EMPTYWAIT, &p->statusflags) && MoxaPortTxQueue(p) == 0) { - p->statusflags &= ~EMPTYWAIT; + clear_bit(EMPTYWAIT, &p->statusflags); tty_wakeup(tty); } - if ((p->statusflags & LOWWAIT) && !tty->stopped && + if (test_bit(LOWWAIT, &p->statusflags) && !tty->stopped && MoxaPortTxQueue(p) <= WAKEUP_CHARS) { - p->statusflags &= ~LOWWAIT; + clear_bit(LOWWAIT, &p->statusflags); tty_wakeup(tty); } - if (inited && !(p->statusflags & THROTTLE) && + if (inited && !test_bit(TTY_THROTTLED, &tty->flags) && MoxaPortRxQueue(p) > 0) { /* RX */ MoxaPortReadData(p); tty_schedule_flip(tty); } } else { - p->statusflags &= ~EMPTYWAIT; + clear_bit(EMPTYWAIT, &p->statusflags); MoxaPortFlushData(p, 0); /* flush RX */ } @@ -1588,35 +1496,6 @@ static void moxa_set_tty_param(struct tty_struct *tty, struct ktermios *old_term tty_encode_baud_rate(tty, baud, baud); } -static void moxa_setup_empty_event(struct tty_struct *tty) -{ - struct moxa_port *ch = tty->driver_data; - - spin_lock_bh(&moxa_lock); - ch->statusflags |= EMPTYWAIT; - spin_unlock_bh(&moxa_lock); -} - -static void moxa_shut_down(struct tty_struct *tty) -{ - struct moxa_port *ch = tty->driver_data; - - if (!(ch->port.flags & ASYNC_INITIALIZED)) - return; - - MoxaPortDisable(ch); - - /* - * If we're a modem control device and HUPCL is on, drop RTS & DTR. - */ - if (C_HUPCL(tty)) - MoxaPortLineCtrl(ch, 0, 0); - - spin_lock_bh(&moxa_lock); - ch->port.flags &= ~ASYNC_INITIALIZED; - spin_unlock_bh(&moxa_lock); -} - /***************************************************************************** * Driver level functions: * *****************************************************************************/ @@ -1918,10 +1797,12 @@ static int MoxaPortSetTermio(struct moxa_port *port, struct ktermios *termio, baud = MoxaPortSetBaud(port, baud); if (termio->c_iflag & (IXON | IXOFF | IXANY)) { + spin_lock_irq(&moxafunc_lock); writeb(termio->c_cc[VSTART], ofsAddr + FuncArg); writeb(termio->c_cc[VSTOP], ofsAddr + FuncArg1); writeb(FC_SetXonXoff, ofsAddr + FuncCode); moxa_wait_finish(ofsAddr); + spin_unlock_irq(&moxafunc_lock); } return baud; @@ -1974,18 +1855,14 @@ static int MoxaPortLineStatus(struct moxa_port *port) int val; ofsAddr = port->tableAddr; - if (MOXA_IS_320(port->board)) { - moxafunc(ofsAddr, FC_LineStatus, 0); - val = readw(ofsAddr + FuncArg); - } else { + if (MOXA_IS_320(port->board)) + val = moxafuncret(ofsAddr, FC_LineStatus, 0); + else val = readw(ofsAddr + FlagStat) >> 4; - } val &= 0x0B; if (val & 8) val |= 4; - spin_lock_bh(&moxa_lock); moxa_new_dcdstate(port, val & 8); - spin_unlock_bh(&moxa_lock); val &= 7; return val; } diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 5e28d39b9e81..3d923065d9a2 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -23,7 +23,6 @@ #include <linux/errno.h> #include <linux/signal.h> #include <linux/sched.h> -#include <linux/smp_lock.h> #include <linux/timer.h> #include <linux/interrupt.h> #include <linux/tty.h> @@ -856,9 +855,9 @@ static void mxser_check_modem_status(struct tty_struct *tty, } } -static int mxser_startup(struct tty_struct *tty) +static int mxser_activate(struct tty_port *port, struct tty_struct *tty) { - struct mxser_port *info = tty->driver_data; + struct mxser_port *info = container_of(port, struct mxser_port, port); unsigned long page; unsigned long flags; @@ -868,22 +867,13 @@ static int mxser_startup(struct tty_struct *tty) spin_lock_irqsave(&info->slock, flags); - if (info->port.flags & ASYNC_INITIALIZED) { - free_page(page); - spin_unlock_irqrestore(&info->slock, flags); - return 0; - } - if (!info->ioaddr || !info->type) { set_bit(TTY_IO_ERROR, &tty->flags); free_page(page); spin_unlock_irqrestore(&info->slock, flags); return 0; } - if (info->port.xmit_buf) - free_page(page); - else - info->port.xmit_buf = (unsigned char *) page; + info->port.xmit_buf = (unsigned char *) page; /* * Clear the FIFO buffers and disable them @@ -951,24 +941,19 @@ static int mxser_startup(struct tty_struct *tty) * and set the speed of the serial port */ mxser_change_speed(tty, NULL); - info->port.flags |= ASYNC_INITIALIZED; spin_unlock_irqrestore(&info->slock, flags); return 0; } /* - * This routine will shutdown a serial port; interrupts maybe disabled, and - * DTR is dropped if the hangup on close termio flag is on. + * This routine will shutdown a serial port */ -static void mxser_shutdown(struct tty_struct *tty) +static void mxser_shutdown_port(struct tty_port *port) { - struct mxser_port *info = tty->driver_data; + struct mxser_port *info = container_of(port, struct mxser_port, port); unsigned long flags; - if (!(info->port.flags & ASYNC_INITIALIZED)) - return; - spin_lock_irqsave(&info->slock, flags); /* @@ -978,7 +963,7 @@ static void mxser_shutdown(struct tty_struct *tty) wake_up_interruptible(&info->port.delta_msr_wait); /* - * Free the IRQ, if necessary + * Free the xmit buffer, if necessary */ if (info->port.xmit_buf) { free_page((unsigned long) info->port.xmit_buf); @@ -988,10 +973,6 @@ static void mxser_shutdown(struct tty_struct *tty) info->IER = 0; outb(0x00, info->ioaddr + UART_IER); - if (tty->termios->c_cflag & HUPCL) - info->MCR &= ~(UART_MCR_DTR | UART_MCR_RTS); - outb(info->MCR, info->ioaddr + UART_MCR); - /* clear Rx/Tx FIFO's */ if (info->board->chip_flag) outb(UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT | @@ -1004,9 +985,6 @@ static void mxser_shutdown(struct tty_struct *tty) /* read data port to reset things */ (void) inb(info->ioaddr + UART_RX); - set_bit(TTY_IO_ERROR, &tty->flags); - - info->port.flags &= ~ASYNC_INITIALIZED; if (info->board->chip_flag) SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr); @@ -1023,8 +1001,7 @@ static void mxser_shutdown(struct tty_struct *tty) static int mxser_open(struct tty_struct *tty, struct file *filp) { struct mxser_port *info; - unsigned long flags; - int retval, line; + int line; line = tty->index; if (line == MXSER_PORTS) @@ -1035,23 +1012,7 @@ static int mxser_open(struct tty_struct *tty, struct file *filp) if (!info->ioaddr) return -ENODEV; - tty->driver_data = info; - tty_port_tty_set(&info->port, tty); - /* - * Start up serial port - */ - spin_lock_irqsave(&info->port.lock, flags); - info->port.count++; - spin_unlock_irqrestore(&info->port.lock, flags); - retval = mxser_startup(tty); - if (retval) - return retval; - - retval = tty_port_block_til_ready(&info->port, tty, filp); - if (retval) - return retval; - - return 0; + return tty_port_open(&info->port, tty, filp); } static void mxser_flush_buffer(struct tty_struct *tty) @@ -1075,19 +1036,11 @@ static void mxser_flush_buffer(struct tty_struct *tty) } -static void mxser_close_port(struct tty_struct *tty, struct tty_port *port) +static void mxser_close_port(struct tty_port *port) { struct mxser_port *info = container_of(port, struct mxser_port, port); unsigned long timeout; /* - * Save the termios structure, since this port may have - * separate termios for callout and dialin. - * - * FIXME: Can this go ? - */ - if (port->flags & ASYNC_NORMAL_ACTIVE) - info->normal_termios = *tty->termios; - /* * At this point we stop accepting input. To do this, we * disable the receive line status interrupts, and tell the * interrupt driver to stop checking the data ready bit in the @@ -1097,22 +1050,18 @@ static void mxser_close_port(struct tty_struct *tty, struct tty_port *port) if (info->board->chip_flag) info->IER &= ~MOXA_MUST_RECV_ISR; - if (port->flags & ASYNC_INITIALIZED) { - outb(info->IER, info->ioaddr + UART_IER); - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - timeout = jiffies + HZ; - while (!(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT)) { - schedule_timeout_interruptible(5); - if (time_after(jiffies, timeout)) - break; - } + outb(info->IER, info->ioaddr + UART_IER); + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important if there is a transmit FIFO! + */ + timeout = jiffies + HZ; + while (!(inb(info->ioaddr + UART_LSR) & UART_LSR_TEMT)) { + schedule_timeout_interruptible(5); + if (time_after(jiffies, timeout)) + break; } - mxser_shutdown(tty); - } /* @@ -1130,8 +1079,12 @@ static void mxser_close(struct tty_struct *tty, struct file *filp) return; if (tty_port_close_start(port, tty, filp) == 0) return; - mxser_close_port(tty, port); + mutex_lock(&port->mutex); + mxser_close_port(port); mxser_flush_buffer(tty); + mxser_shutdown_port(port); + clear_bit(ASYNCB_INITIALIZED, &port->flags); + mutex_unlock(&port->mutex); /* Right now the tty_port set is done outside of the close_end helper as we don't yet have everyone using refcounts */ tty_port_close_end(port, tty); @@ -1275,6 +1228,7 @@ static int mxser_set_serial_info(struct tty_struct *tty, struct serial_struct __user *new_info) { struct mxser_port *info = tty->driver_data; + struct tty_port *port = &info->port; struct serial_struct new_serial; speed_t baud; unsigned long sl_flags; @@ -1290,7 +1244,7 @@ static int mxser_set_serial_info(struct tty_struct *tty, new_serial.port != info->ioaddr) return -EINVAL; - flags = info->port.flags & ASYNC_SPD_MASK; + flags = port->flags & ASYNC_SPD_MASK; if (!capable(CAP_SYS_ADMIN)) { if ((new_serial.baud_base != info->baud_base) || @@ -1304,16 +1258,17 @@ static int mxser_set_serial_info(struct tty_struct *tty, * OK, past this point, all the error checking has been done. * At this point, we start making changes..... */ - info->port.flags = ((info->port.flags & ~ASYNC_FLAGS) | + port->flags = ((port->flags & ~ASYNC_FLAGS) | (new_serial.flags & ASYNC_FLAGS)); - info->port.close_delay = new_serial.close_delay * HZ / 100; - info->port.closing_wait = new_serial.closing_wait * HZ / 100; - tty->low_latency = (info->port.flags & ASYNC_LOW_LATENCY) - ? 1 : 0; - if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && + port->close_delay = new_serial.close_delay * HZ / 100; + port->closing_wait = new_serial.closing_wait * HZ / 100; + tty->low_latency = (port->flags & ASYNC_LOW_LATENCY) ? 1 : 0; + if ((port->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && (new_serial.baud_base != info->baud_base || new_serial.custom_divisor != info->custom_divisor)) { + if (new_serial.custom_divisor == 0) + return -EINVAL; baud = new_serial.baud_base / new_serial.custom_divisor; tty_encode_baud_rate(tty, baud, baud); } @@ -1323,15 +1278,17 @@ static int mxser_set_serial_info(struct tty_struct *tty, process_txrx_fifo(info); - if (info->port.flags & ASYNC_INITIALIZED) { - if (flags != (info->port.flags & ASYNC_SPD_MASK)) { + if (test_bit(ASYNCB_INITIALIZED, &port->flags)) { + if (flags != (port->flags & ASYNC_SPD_MASK)) { spin_lock_irqsave(&info->slock, sl_flags); mxser_change_speed(tty, NULL); spin_unlock_irqrestore(&info->slock, sl_flags); } - } else - retval = mxser_startup(tty); - + } else { + retval = mxser_activate(port, tty); + if (retval == 0) + set_bit(ASYNCB_INITIALIZED, &port->flags); + } return retval; } @@ -1520,7 +1477,8 @@ static int __init mxser_read_register(int port, unsigned short *regs) static int mxser_ioctl_special(unsigned int cmd, void __user *argp) { - struct mxser_port *port; + struct mxser_port *ip; + struct tty_port *port; struct tty_struct *tty; int result, status; unsigned int i, j; @@ -1536,38 +1494,39 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp) case MOXA_CHKPORTENABLE: result = 0; - lock_kernel(); for (i = 0; i < MXSER_BOARDS; i++) for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) if (mxser_boards[i].ports[j].ioaddr) result |= (1 << i); - unlock_kernel(); return put_user(result, (unsigned long __user *)argp); case MOXA_GETDATACOUNT: - lock_kernel(); + /* The receive side is locked by port->slock but it isn't + clear that an exact snapshot is worth copying here */ if (copy_to_user(argp, &mxvar_log, sizeof(mxvar_log))) ret = -EFAULT; - unlock_kernel(); return ret; case MOXA_GETMSTATUS: { struct mxser_mstatus ms, __user *msu = argp; - lock_kernel(); for (i = 0; i < MXSER_BOARDS; i++) for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) { - port = &mxser_boards[i].ports[j]; + ip = &mxser_boards[i].ports[j]; + port = &ip->port; memset(&ms, 0, sizeof(ms)); - if (!port->ioaddr) + mutex_lock(&port->mutex); + if (!ip->ioaddr) goto copy; - tty = tty_port_tty_get(&port->port); + tty = tty_port_tty_get(port); if (!tty || !tty->termios) - ms.cflag = port->normal_termios.c_cflag; + ms.cflag = ip->normal_termios.c_cflag; else ms.cflag = tty->termios->c_cflag; tty_kref_put(tty); - status = inb(port->ioaddr + UART_MSR); + spin_lock_irq(&ip->slock); + status = inb(ip->ioaddr + UART_MSR); + spin_unlock_irq(&ip->slock); if (status & UART_MSR_DCD) ms.dcd = 1; if (status & UART_MSR_DSR) @@ -1575,13 +1534,11 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp) if (status & UART_MSR_CTS) ms.cts = 1; copy: - if (copy_to_user(msu, &ms, sizeof(ms))) { - unlock_kernel(); + mutex_unlock(&port->mutex); + if (copy_to_user(msu, &ms, sizeof(ms))) return -EFAULT; - } msu++; } - unlock_kernel(); return 0; } case MOXA_ASPP_MON_EXT: { @@ -1593,41 +1550,48 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp) if (!me) return -ENOMEM; - lock_kernel(); for (i = 0, p = 0; i < MXSER_BOARDS; i++) { for (j = 0; j < MXSER_PORTS_PER_BOARD; j++, p++) { if (p >= ARRAY_SIZE(me->rx_cnt)) { i = MXSER_BOARDS; break; } - port = &mxser_boards[i].ports[j]; - if (!port->ioaddr) + ip = &mxser_boards[i].ports[j]; + port = &ip->port; + + mutex_lock(&port->mutex); + if (!ip->ioaddr) { + mutex_unlock(&port->mutex); continue; + } - status = mxser_get_msr(port->ioaddr, 0, p); + spin_lock_irq(&ip->slock); + status = mxser_get_msr(ip->ioaddr, 0, p); if (status & UART_MSR_TERI) - port->icount.rng++; + ip->icount.rng++; if (status & UART_MSR_DDSR) - port->icount.dsr++; + ip->icount.dsr++; if (status & UART_MSR_DDCD) - port->icount.dcd++; + ip->icount.dcd++; if (status & UART_MSR_DCTS) - port->icount.cts++; + ip->icount.cts++; - port->mon_data.modem_status = status; - me->rx_cnt[p] = port->mon_data.rxcnt; - me->tx_cnt[p] = port->mon_data.txcnt; - me->up_rxcnt[p] = port->mon_data.up_rxcnt; - me->up_txcnt[p] = port->mon_data.up_txcnt; + ip->mon_data.modem_status = status; + me->rx_cnt[p] = ip->mon_data.rxcnt; + me->tx_cnt[p] = ip->mon_data.txcnt; + me->up_rxcnt[p] = ip->mon_data.up_rxcnt; + me->up_txcnt[p] = ip->mon_data.up_txcnt; me->modem_status[p] = - port->mon_data.modem_status; - tty = tty_port_tty_get(&port->port); + ip->mon_data.modem_status; + spin_unlock_irq(&ip->slock); + + tty = tty_port_tty_get(&ip->port); if (!tty || !tty->termios) { - cflag = port->normal_termios.c_cflag; - iflag = port->normal_termios.c_iflag; - me->baudrate[p] = tty_termios_baud_rate(&port->normal_termios); + cflag = ip->normal_termios.c_cflag; + iflag = ip->normal_termios.c_iflag; + me->baudrate[p] = tty_termios_baud_rate(&ip->normal_termios); } else { cflag = tty->termios->c_cflag; iflag = tty->termios->c_iflag; @@ -1646,16 +1610,15 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp) if (iflag & (IXON | IXOFF)) me->flowctrl[p] |= 0x0C; - if (port->type == PORT_16550A) + if (ip->type == PORT_16550A) me->fifo[p] = 1; - opmode = inb(port->opmode_ioaddr) >> - ((p % 4) * 2); + opmode = inb(ip->opmode_ioaddr)>>((p % 4) * 2); opmode &= OP_MODE_MASK; me->iftype[p] = opmode; + mutex_unlock(&port->mutex); } } - unlock_kernel(); if (copy_to_user(argp, me, sizeof(*me))) ret = -EFAULT; kfree(me); @@ -1692,6 +1655,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { struct mxser_port *info = tty->driver_data; + struct tty_port *port = &info->port; struct async_icount cnow; unsigned long flags; void __user *argp = (void __user *)arg; @@ -1716,20 +1680,20 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, opmode != RS422_MODE && opmode != RS485_4WIRE_MODE) return -EFAULT; - lock_kernel(); mask = ModeMask[p]; shiftbit = p * 2; + spin_lock_irq(&info->slock); val = inb(info->opmode_ioaddr); val &= mask; val |= (opmode << shiftbit); outb(val, info->opmode_ioaddr); - unlock_kernel(); + spin_unlock_irq(&info->slock); } else { - lock_kernel(); shiftbit = p * 2; + spin_lock_irq(&info->slock); opmode = inb(info->opmode_ioaddr) >> shiftbit; + spin_unlock_irq(&info->slock); opmode &= OP_MODE_MASK; - unlock_kernel(); if (put_user(opmode, (int __user *)argp)) return -EFAULT; } @@ -1742,14 +1706,14 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, switch (cmd) { case TIOCGSERIAL: - lock_kernel(); + mutex_lock(&port->mutex); retval = mxser_get_serial_info(tty, argp); - unlock_kernel(); + mutex_unlock(&port->mutex); return retval; case TIOCSSERIAL: - lock_kernel(); + mutex_lock(&port->mutex); retval = mxser_set_serial_info(tty, argp); - unlock_kernel(); + mutex_unlock(&port->mutex); return retval; case TIOCSERGETLSR: /* Get line status register */ return mxser_get_lsr_info(info, argp); @@ -1795,31 +1759,33 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, case MOXA_HighSpeedOn: return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp); case MOXA_SDS_RSTICOUNTER: - lock_kernel(); + spin_lock_irq(&info->slock); info->mon_data.rxcnt = 0; info->mon_data.txcnt = 0; - unlock_kernel(); + spin_unlock_irq(&info->slock); return 0; case MOXA_ASPP_OQUEUE:{ int len, lsr; - lock_kernel(); len = mxser_chars_in_buffer(tty); + spin_lock(&info->slock); lsr = inb(info->ioaddr + UART_LSR) & UART_LSR_THRE; + spin_unlock_irq(&info->slock); len += (lsr ? 0 : 1); - unlock_kernel(); return put_user(len, (int __user *)argp); } case MOXA_ASPP_MON: { int mcr, status; - lock_kernel(); + spin_lock(&info->slock); status = mxser_get_msr(info->ioaddr, 1, tty->index); mxser_check_modem_status(tty, info, status); mcr = inb(info->ioaddr + UART_MCR); + spin_unlock(&info->slock); + if (mcr & MOXA_MUST_MCR_XON_FLAG) info->mon_data.hold_reason &= ~NPPI_NOTIFY_XOFFHOLD; else @@ -1834,7 +1800,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD; else info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD; - unlock_kernel(); + if (copy_to_user(argp, &info->mon_data, sizeof(struct mxser_mon))) return -EFAULT; @@ -1993,6 +1959,7 @@ static void mxser_wait_until_sent(struct tty_struct *tty, int timeout) { struct mxser_port *info = tty->driver_data; unsigned long orig_jiffies, char_time; + unsigned long flags; int lsr; if (info->type == PORT_UNKNOWN) @@ -2032,19 +1999,21 @@ static void mxser_wait_until_sent(struct tty_struct *tty, int timeout) timeout, char_time); printk("jiff=%lu...", jiffies); #endif - lock_kernel(); + spin_lock_irqsave(&info->slock, flags); while (!((lsr = inb(info->ioaddr + UART_LSR)) & UART_LSR_TEMT)) { #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT printk("lsr = %d (jiff=%lu)...", lsr, jiffies); #endif + spin_unlock_irqrestore(&info->slock, flags); schedule_timeout_interruptible(char_time); + spin_lock_irqsave(&info->slock, flags); if (signal_pending(current)) break; if (timeout && time_after(jiffies, orig_jiffies + timeout)) break; } + spin_unlock_irqrestore(&info->slock, flags); set_current_state(TASK_RUNNING); - unlock_kernel(); #ifdef SERIAL_DEBUG_RS_WAIT_UNTIL_SENT printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies); @@ -2059,7 +2028,6 @@ static void mxser_hangup(struct tty_struct *tty) struct mxser_port *info = tty->driver_data; mxser_flush_buffer(tty); - mxser_shutdown(tty); tty_port_hangup(&info->port); } @@ -2363,6 +2331,8 @@ static const struct tty_operations mxser_ops = { struct tty_port_operations mxser_port_ops = { .carrier_raised = mxser_carrier_raised, .dtr_rts = mxser_dtr_rts, + .activate = mxser_activate, + .shutdown = mxser_shutdown_port, }; /* diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c index d3400b20444f..7d73cd430340 100644 --- a/drivers/char/nozomi.c +++ b/drivers/char/nozomi.c @@ -358,7 +358,7 @@ struct port { u8 update_flow_control; struct ctrl_ul ctrl_ul; struct ctrl_dl ctrl_dl; - struct kfifo *fifo_ul; + struct kfifo fifo_ul; void __iomem *dl_addr[2]; u32 dl_size[2]; u8 toggle_dl; @@ -685,8 +685,6 @@ static int nozomi_read_config_table(struct nozomi *dc) dump_table(dc); for (i = PORT_MDM; i < MAX_PORT; i++) { - dc->port[i].fifo_ul = - kfifo_alloc(FIFO_BUFFER_SIZE_UL, GFP_ATOMIC, NULL); memset(&dc->port[i].ctrl_dl, 0, sizeof(struct ctrl_dl)); memset(&dc->port[i].ctrl_ul, 0, sizeof(struct ctrl_ul)); } @@ -798,7 +796,7 @@ static int send_data(enum port_type index, struct nozomi *dc) struct tty_struct *tty = tty_port_tty_get(&port->port); /* Get data from tty and place in buf for now */ - size = __kfifo_get(port->fifo_ul, dc->send_buf, + size = kfifo_out(&port->fifo_ul, dc->send_buf, ul_size < SEND_BUF_MAX ? ul_size : SEND_BUF_MAX); if (size == 0) { @@ -988,11 +986,11 @@ static int receive_flow_control(struct nozomi *dc) } else if (old_ctrl.CTS == 0 && ctrl_dl.CTS == 1) { - if (__kfifo_len(dc->port[port].fifo_ul)) { + if (kfifo_len(&dc->port[port].fifo_ul)) { DBG1("Enable interrupt (0x%04X) on port: %d", enable_ier, port); DBG1("Data in buffer [%d], enable transmit! ", - __kfifo_len(dc->port[port].fifo_ul)); + kfifo_len(&dc->port[port].fifo_ul)); enable_transmit_ul(port, dc); } else { DBG1("No data in buffer..."); @@ -1433,6 +1431,16 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev, goto err_free_sbuf; } + for (i = PORT_MDM; i < MAX_PORT; i++) { + if (kfifo_alloc(&dc->port[i].fifo_ul, + FIFO_BUFFER_SIZE_UL, GFP_ATOMIC)) { + dev_err(&pdev->dev, + "Could not allocate kfifo buffer\n"); + ret = -ENOMEM; + goto err_free_kfifo; + } + } + spin_lock_init(&dc->spin_mutex); nozomi_setup_private_data(dc); @@ -1445,7 +1453,7 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev, NOZOMI_NAME, dc); if (unlikely(ret)) { dev_err(&pdev->dev, "can't request irq %d\n", pdev->irq); - goto err_free_sbuf; + goto err_free_kfifo; } DBG1("base_addr: %p", dc->base_addr); @@ -1464,13 +1472,28 @@ static int __devinit nozomi_card_init(struct pci_dev *pdev, dc->state = NOZOMI_STATE_ENABLED; for (i = 0; i < MAX_PORT; i++) { + struct device *tty_dev; + mutex_init(&dc->port[i].tty_sem); tty_port_init(&dc->port[i].port); - tty_register_device(ntty_driver, dc->index_start + i, + tty_dev = tty_register_device(ntty_driver, dc->index_start + i, &pdev->dev); + + if (IS_ERR(tty_dev)) { + ret = PTR_ERR(tty_dev); + dev_err(&pdev->dev, "Could not allocate tty?\n"); + goto err_free_tty; + } } + return 0; +err_free_tty: + for (i = dc->index_start; i < dc->index_start + MAX_PORT; ++i) + tty_unregister_device(ntty_driver, i); +err_free_kfifo: + for (i = 0; i < MAX_PORT; i++) + kfifo_free(&dc->port[i].fifo_ul); err_free_sbuf: kfree(dc->send_buf); iounmap(dc->base_addr); @@ -1536,8 +1559,7 @@ static void __devexit nozomi_card_exit(struct pci_dev *pdev) free_irq(pdev->irq, dc); for (i = 0; i < MAX_PORT; i++) - if (dc->port[i].fifo_ul) - kfifo_free(dc->port[i].fifo_ul); + kfifo_free(&dc->port[i].fifo_ul); kfree(dc->send_buf); @@ -1673,7 +1695,7 @@ static int ntty_write(struct tty_struct *tty, const unsigned char *buffer, goto exit; } - rval = __kfifo_put(port->fifo_ul, (unsigned char *)buffer, count); + rval = kfifo_in(&port->fifo_ul, (unsigned char *)buffer, count); /* notify card */ if (unlikely(dc == NULL)) { @@ -1721,7 +1743,7 @@ static int ntty_write_room(struct tty_struct *tty) if (!port->port.count) goto exit; - room = port->fifo_ul->size - __kfifo_len(port->fifo_ul); + room = port->fifo_ul.size - kfifo_len(&port->fifo_ul); exit: mutex_unlock(&port->tty_sem); @@ -1878,7 +1900,7 @@ static s32 ntty_chars_in_buffer(struct tty_struct *tty) goto exit_in_buffer; } - rval = __kfifo_len(port->fifo_ul); + rval = kfifo_len(&port->fifo_ul); exit_in_buffer: return rval; diff --git a/drivers/char/nvram.c b/drivers/char/nvram.c index 4008e2ce73c1..fdbcc9fd6d31 100644 --- a/drivers/char/nvram.c +++ b/drivers/char/nvram.c @@ -264,10 +264,16 @@ static ssize_t nvram_write(struct file *file, const char __user *buf, unsigned char contents[NVRAM_BYTES]; unsigned i = *ppos; unsigned char *tmp; - int len; - len = (NVRAM_BYTES - i) < count ? (NVRAM_BYTES - i) : count; - if (copy_from_user(contents, buf, len)) + if (i >= NVRAM_BYTES) + return 0; /* Past EOF */ + + if (count > NVRAM_BYTES - i) + count = NVRAM_BYTES - i; + if (count > NVRAM_BYTES) + return -EFAULT; /* Can't happen, but prove it to gcc */ + + if (copy_from_user(contents, buf, count)) return -EFAULT; spin_lock_irq(&rtc_lock); @@ -275,7 +281,7 @@ static ssize_t nvram_write(struct file *file, const char __user *buf, if (!__nvram_check_checksum()) goto checksum_err; - for (tmp = contents; count-- > 0 && i < NVRAM_BYTES; ++i, ++tmp) + for (tmp = contents; count--; ++i, ++tmp) __nvram_write_byte(*tmp, i); __nvram_set_checksum(); diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c index 8c7df5ba088f..f80810901db6 100644 --- a/drivers/char/nwflash.c +++ b/drivers/char/nwflash.c @@ -27,6 +27,7 @@ #include <linux/init.h> #include <linux/smp_lock.h> #include <linux/mutex.h> +#include <linux/jiffies.h> #include <asm/hardware/dec21285.h> #include <asm/io.h> diff --git a/drivers/char/pcmcia/ipwireless/tty.c b/drivers/char/pcmcia/ipwireless/tty.c index 674b3ab3587d..2bb7874a6899 100644 --- a/drivers/char/pcmcia/ipwireless/tty.c +++ b/drivers/char/pcmcia/ipwireless/tty.c @@ -603,7 +603,7 @@ void ipwireless_tty_free(struct ipw_tty *tty) } } -static struct tty_operations tty_ops = { +static const struct tty_operations tty_ops = { .open = ipw_open, .close = ipw_close, .hangup = ipw_hangup, diff --git a/drivers/char/pty.c b/drivers/char/pty.c index d86c0bc05c1c..385c44b3034f 100644 --- a/drivers/char/pty.c +++ b/drivers/char/pty.c @@ -659,7 +659,7 @@ static int __ptmx_open(struct inode *inode, struct file *filp) if (!retval) return 0; out1: - tty_release_dev(filp); + tty_release(inode, filp); return retval; out: devpts_kill_index(inode, index); diff --git a/drivers/char/random.c b/drivers/char/random.c index dcd08635cf1b..8258982b49ec 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1245,12 +1245,8 @@ static int proc_do_uuid(ctl_table *table, int write, if (uuid[8] == 0) generate_random_uuid(uuid); - sprintf(buf, "%02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-" - "%02x%02x%02x%02x%02x%02x", - uuid[0], uuid[1], uuid[2], uuid[3], - uuid[4], uuid[5], uuid[6], uuid[7], - uuid[8], uuid[9], uuid[10], uuid[11], - uuid[12], uuid[13], uuid[14], uuid[15]); + sprintf(buf, "%pU", uuid); + fake_table.data = buf; fake_table.maxlen = sizeof(buf); @@ -1310,7 +1306,7 @@ ctl_table random_table[] = { /******************************************************************** * - * Random funtions for networking + * Random functions for networking * ********************************************************************/ diff --git a/drivers/char/riscom8.c b/drivers/char/riscom8.c index 3cfa22d469e0..0a8d1e56c993 100644 --- a/drivers/char/riscom8.c +++ b/drivers/char/riscom8.c @@ -793,26 +793,21 @@ static void rc_change_speed(struct tty_struct *tty, struct riscom_board *bp, } /* Must be called with interrupts enabled */ -static int rc_setup_port(struct tty_struct *tty, struct riscom_board *bp, - struct riscom_port *port) +static int rc_activate_port(struct tty_port *port, struct tty_struct *tty) { + struct riscom_port *rp = container_of(port, struct riscom_port, port); + struct riscom_board *bp = port_Board(rp); unsigned long flags; - if (port->port.flags & ASYNC_INITIALIZED) - return 0; - - if (tty_port_alloc_xmit_buf(&port->port) < 0) + if (tty_port_alloc_xmit_buf(port) < 0) return -ENOMEM; spin_lock_irqsave(&riscom_lock, flags); clear_bit(TTY_IO_ERROR, &tty->flags); - if (port->port.count == 1) - bp->count++; - port->xmit_cnt = port->xmit_head = port->xmit_tail = 0; - rc_change_speed(tty, bp, port); - port->port.flags |= ASYNC_INITIALIZED; - + bp->count++; + rp->xmit_cnt = rp->xmit_head = rp->xmit_tail = 0; + rc_change_speed(tty, bp, rp); spin_unlock_irqrestore(&riscom_lock, flags); return 0; } @@ -821,9 +816,6 @@ static int rc_setup_port(struct tty_struct *tty, struct riscom_board *bp, static void rc_shutdown_port(struct tty_struct *tty, struct riscom_board *bp, struct riscom_port *port) { - if (!(port->port.flags & ASYNC_INITIALIZED)) - return; - #ifdef RC_REPORT_OVERRUN printk(KERN_INFO "rc%d: port %d: Total %ld overruns were detected.\n", board_No(bp), port_No(port), port->overrun); @@ -840,11 +832,6 @@ static void rc_shutdown_port(struct tty_struct *tty, } #endif tty_port_free_xmit_buf(&port->port); - if (C_HUPCL(tty)) { - /* Drop DTR */ - bp->DTR |= (1u << port_No(port)); - rc_out(bp, RC_DTR, bp->DTR); - } /* Select port */ rc_out(bp, CD180_CAR, port_No(port)); @@ -856,7 +843,6 @@ static void rc_shutdown_port(struct tty_struct *tty, rc_out(bp, CD180_IER, port->IER); set_bit(TTY_IO_ERROR, &tty->flags); - port->port.flags &= ~ASYNC_INITIALIZED; if (--bp->count < 0) { printk(KERN_INFO "rc%d: rc_shutdown_port: " @@ -889,6 +875,20 @@ static int carrier_raised(struct tty_port *port) return CD; } +static void dtr_rts(struct tty_port *port, int onoff) +{ + struct riscom_port *p = container_of(port, struct riscom_port, port); + struct riscom_board *bp = port_Board(p); + unsigned long flags; + + spin_lock_irqsave(&riscom_lock, flags); + bp->DTR &= ~(1u << port_No(p)); + if (onoff == 0) + bp->DTR |= (1u << port_No(p)); + rc_out(bp, RC_DTR, bp->DTR); + spin_unlock_irqrestore(&riscom_lock, flags); +} + static int rc_open(struct tty_struct *tty, struct file *filp) { int board; @@ -909,14 +909,7 @@ static int rc_open(struct tty_struct *tty, struct file *filp) if (error) return error; - port->port.count++; - tty->driver_data = port; - tty_port_tty_set(&port->port, tty); - - error = rc_setup_port(tty, bp, port); - if (error == 0) - error = tty_port_block_til_ready(&port->port, tty, filp); - return error; + return tty_port_open(&port->port, tty, filp); } static void rc_flush_buffer(struct tty_struct *tty) @@ -950,24 +943,23 @@ static void rc_close_port(struct tty_port *port) spin_lock_irqsave(&riscom_lock, flags); rp->IER &= ~IER_RXD; - if (port->flags & ASYNC_INITIALIZED) { - rp->IER &= ~IER_TXRDY; - rp->IER |= IER_TXEMPTY; - rc_out(bp, CD180_CAR, port_No(rp)); - rc_out(bp, CD180_IER, rp->IER); - /* - * Before we drop DTR, make sure the UART transmitter - * has completely drained; this is especially - * important if there is a transmit FIFO! - */ - timeout = jiffies + HZ; - while (rp->IER & IER_TXEMPTY) { - spin_unlock_irqrestore(&riscom_lock, flags); - msleep_interruptible(jiffies_to_msecs(rp->timeout)); - spin_lock_irqsave(&riscom_lock, flags); - if (time_after(jiffies, timeout)) - break; - } + + rp->IER &= ~IER_TXRDY; + rp->IER |= IER_TXEMPTY; + rc_out(bp, CD180_CAR, port_No(rp)); + rc_out(bp, CD180_IER, rp->IER); + /* + * Before we drop DTR, make sure the UART transmitter + * has completely drained; this is especially + * important if there is a transmit FIFO! + */ + timeout = jiffies + HZ; + while (rp->IER & IER_TXEMPTY) { + spin_unlock_irqrestore(&riscom_lock, flags); + msleep_interruptible(jiffies_to_msecs(rp->timeout)); + spin_lock_irqsave(&riscom_lock, flags); + if (time_after(jiffies, timeout)) + break; } rc_shutdown_port(port->tty, bp, rp); spin_unlock_irqrestore(&riscom_lock, flags); @@ -1354,7 +1346,6 @@ static void rc_hangup(struct tty_struct *tty) if (rc_paranoia_check(port, tty->name, "rc_hangup")) return; - rc_shutdown_port(tty, port_Board(port), port); tty_port_hangup(&port->port); } @@ -1401,7 +1392,9 @@ static const struct tty_operations riscom_ops = { static const struct tty_port_operations riscom_port_ops = { .carrier_raised = carrier_raised, + .dtr_rts = dtr_rts, .shutdown = rc_close_port, + .activate = rc_activate_port, }; diff --git a/drivers/char/sonypi.c b/drivers/char/sonypi.c index 8c262aaf7c26..bba727c3807e 100644 --- a/drivers/char/sonypi.c +++ b/drivers/char/sonypi.c @@ -50,7 +50,6 @@ #include <linux/err.h> #include <linux/kfifo.h> #include <linux/platform_device.h> -#include <linux/smp_lock.h> #include <asm/uaccess.h> #include <asm/io.h> @@ -487,7 +486,7 @@ static struct sonypi_device { int camera_power; int bluetooth_power; struct mutex lock; - struct kfifo *fifo; + struct kfifo fifo; spinlock_t fifo_lock; wait_queue_head_t fifo_proc_list; struct fasync_struct *fifo_async; @@ -496,7 +495,7 @@ static struct sonypi_device { struct input_dev *input_jog_dev; struct input_dev *input_key_dev; struct work_struct input_work; - struct kfifo *input_fifo; + struct kfifo input_fifo; spinlock_t input_fifo_lock; } sonypi_device; @@ -777,8 +776,9 @@ static void input_keyrelease(struct work_struct *work) { struct sonypi_keypress kp; - while (kfifo_get(sonypi_device.input_fifo, (unsigned char *)&kp, - sizeof(kp)) == sizeof(kp)) { + while (kfifo_out_locked(&sonypi_device.input_fifo, (unsigned char *)&kp, + sizeof(kp), &sonypi_device.input_fifo_lock) + == sizeof(kp)) { msleep(10); input_report_key(kp.dev, kp.key, 0); input_sync(kp.dev); @@ -827,8 +827,9 @@ static void sonypi_report_input_event(u8 event) if (kp.dev) { input_report_key(kp.dev, kp.key, 1); input_sync(kp.dev); - kfifo_put(sonypi_device.input_fifo, - (unsigned char *)&kp, sizeof(kp)); + kfifo_in_locked(&sonypi_device.input_fifo, + (unsigned char *)&kp, sizeof(kp), + &sonypi_device.input_fifo_lock); schedule_work(&sonypi_device.input_work); } } @@ -880,7 +881,8 @@ found: acpi_bus_generate_proc_event(sonypi_acpi_device, 1, event); #endif - kfifo_put(sonypi_device.fifo, (unsigned char *)&event, sizeof(event)); + kfifo_in_locked(&sonypi_device.fifo, (unsigned char *)&event, + sizeof(event), &sonypi_device.fifo_lock); kill_fasync(&sonypi_device.fifo_async, SIGIO, POLL_IN); wake_up_interruptible(&sonypi_device.fifo_proc_list); @@ -902,14 +904,13 @@ static int sonypi_misc_release(struct inode *inode, struct file *file) static int sonypi_misc_open(struct inode *inode, struct file *file) { - lock_kernel(); mutex_lock(&sonypi_device.lock); /* Flush input queue on first open */ if (!sonypi_device.open_count) - kfifo_reset(sonypi_device.fifo); + kfifo_reset(&sonypi_device.fifo); sonypi_device.open_count++; mutex_unlock(&sonypi_device.lock); - unlock_kernel(); + return 0; } @@ -919,17 +920,18 @@ static ssize_t sonypi_misc_read(struct file *file, char __user *buf, ssize_t ret; unsigned char c; - if ((kfifo_len(sonypi_device.fifo) == 0) && + if ((kfifo_len(&sonypi_device.fifo) == 0) && (file->f_flags & O_NONBLOCK)) return -EAGAIN; ret = wait_event_interruptible(sonypi_device.fifo_proc_list, - kfifo_len(sonypi_device.fifo) != 0); + kfifo_len(&sonypi_device.fifo) != 0); if (ret) return ret; while (ret < count && - (kfifo_get(sonypi_device.fifo, &c, sizeof(c)) == sizeof(c))) { + (kfifo_out_locked(&sonypi_device.fifo, &c, sizeof(c), + &sonypi_device.fifo_lock) == sizeof(c))) { if (put_user(c, buf++)) return -EFAULT; ret++; @@ -946,15 +948,15 @@ static ssize_t sonypi_misc_read(struct file *file, char __user *buf, static unsigned int sonypi_misc_poll(struct file *file, poll_table *wait) { poll_wait(file, &sonypi_device.fifo_proc_list, wait); - if (kfifo_len(sonypi_device.fifo)) + if (kfifo_len(&sonypi_device.fifo)) return POLLIN | POLLRDNORM; return 0; } -static int sonypi_misc_ioctl(struct inode *ip, struct file *fp, +static long sonypi_misc_ioctl(struct file *fp, unsigned int cmd, unsigned long arg) { - int ret = 0; + long ret = 0; void __user *argp = (void __user *)arg; u8 val8; u16 val16; @@ -1070,7 +1072,8 @@ static const struct file_operations sonypi_misc_fops = { .open = sonypi_misc_open, .release = sonypi_misc_release, .fasync = sonypi_misc_fasync, - .ioctl = sonypi_misc_ioctl, + .unlocked_ioctl = sonypi_misc_ioctl, + .llseek = no_llseek, }; static struct miscdevice sonypi_misc_device = { @@ -1313,11 +1316,10 @@ static int __devinit sonypi_probe(struct platform_device *dev) "http://www.linux.it/~malattia/wiki/index.php/Sony_drivers\n"); spin_lock_init(&sonypi_device.fifo_lock); - sonypi_device.fifo = kfifo_alloc(SONYPI_BUF_SIZE, GFP_KERNEL, - &sonypi_device.fifo_lock); - if (IS_ERR(sonypi_device.fifo)) { + error = kfifo_alloc(&sonypi_device.fifo, SONYPI_BUF_SIZE, GFP_KERNEL); + if (error) { printk(KERN_ERR "sonypi: kfifo_alloc failed\n"); - return PTR_ERR(sonypi_device.fifo); + return error; } init_waitqueue_head(&sonypi_device.fifo_proc_list); @@ -1393,12 +1395,10 @@ static int __devinit sonypi_probe(struct platform_device *dev) } spin_lock_init(&sonypi_device.input_fifo_lock); - sonypi_device.input_fifo = - kfifo_alloc(SONYPI_BUF_SIZE, GFP_KERNEL, - &sonypi_device.input_fifo_lock); - if (IS_ERR(sonypi_device.input_fifo)) { + error = kfifo_alloc(&sonypi_device.input_fifo, SONYPI_BUF_SIZE, + GFP_KERNEL); + if (error) { printk(KERN_ERR "sonypi: kfifo_alloc failed\n"); - error = PTR_ERR(sonypi_device.input_fifo); goto err_inpdev_unregister; } @@ -1423,7 +1423,7 @@ static int __devinit sonypi_probe(struct platform_device *dev) pci_disable_device(pcidev); err_put_pcidev: pci_dev_put(pcidev); - kfifo_free(sonypi_device.fifo); + kfifo_free(&sonypi_device.fifo); return error; } @@ -1438,7 +1438,7 @@ static int __devexit sonypi_remove(struct platform_device *dev) if (useinput) { input_unregister_device(sonypi_device.input_key_dev); input_unregister_device(sonypi_device.input_jog_dev); - kfifo_free(sonypi_device.input_fifo); + kfifo_free(&sonypi_device.input_fifo); } misc_deregister(&sonypi_misc_device); @@ -1451,7 +1451,7 @@ static int __devexit sonypi_remove(struct platform_device *dev) pci_dev_put(sonypi_device.dev); } - kfifo_free(sonypi_device.fifo); + kfifo_free(&sonypi_device.fifo); return 0; } diff --git a/drivers/char/stallion.c b/drivers/char/stallion.c index db6dcfa35ba0..0e511d61f544 100644 --- a/drivers/char/stallion.c +++ b/drivers/char/stallion.c @@ -407,7 +407,7 @@ static unsigned int stl_baudrates[] = { * Declare all those functions in this driver! */ -static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg); +static long stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg); static int stl_brdinit(struct stlbrd *brdp); static int stl_getportstats(struct tty_struct *tty, struct stlport *portp, comstats_t __user *cp); static int stl_clrportstats(struct stlport *portp, comstats_t __user *cp); @@ -607,7 +607,7 @@ static unsigned int sc26198_baudtable[] = { */ static const struct file_operations stl_fsiomem = { .owner = THIS_MODULE, - .ioctl = stl_memioctl, + .unlocked_ioctl = stl_memioctl, }; static struct class *stallion_class; @@ -702,6 +702,24 @@ static struct stlbrd *stl_allocbrd(void) /*****************************************************************************/ +static int stl_activate(struct tty_port *port, struct tty_struct *tty) +{ + struct stlport *portp = container_of(port, struct stlport, port); + if (!portp->tx.buf) { + portp->tx.buf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL); + if (!portp->tx.buf) + return -ENOMEM; + portp->tx.head = portp->tx.buf; + portp->tx.tail = portp->tx.buf; + } + stl_setport(portp, tty->termios); + portp->sigs = stl_getsignals(portp); + stl_setsignals(portp, 1, 1); + stl_enablerxtx(portp, 1, 1); + stl_startrxtx(portp, 1, 0); + return 0; +} + static int stl_open(struct tty_struct *tty, struct file *filp) { struct stlport *portp; @@ -737,32 +755,8 @@ static int stl_open(struct tty_struct *tty, struct file *filp) if (portp == NULL) return -ENODEV; port = &portp->port; + return tty_port_open(&portp->port, tty, filp); -/* - * On the first open of the device setup the port hardware, and - * initialize the per port data structure. - */ - tty_port_tty_set(port, tty); - tty->driver_data = portp; - port->count++; - - if ((port->flags & ASYNC_INITIALIZED) == 0) { - if (!portp->tx.buf) { - portp->tx.buf = kmalloc(STL_TXBUFSIZE, GFP_KERNEL); - if (!portp->tx.buf) - return -ENOMEM; - portp->tx.head = portp->tx.buf; - portp->tx.tail = portp->tx.buf; - } - stl_setport(portp, tty->termios); - portp->sigs = stl_getsignals(portp); - stl_setsignals(portp, 1, 1); - stl_enablerxtx(portp, 1, 1); - stl_startrxtx(portp, 1, 0); - clear_bit(TTY_IO_ERROR, &tty->flags); - port->flags |= ASYNC_INITIALIZED; - } - return tty_port_block_til_ready(port, tty, filp); } /*****************************************************************************/ @@ -826,38 +820,12 @@ static void stl_waituntilsent(struct tty_struct *tty, int timeout) /*****************************************************************************/ -static void stl_close(struct tty_struct *tty, struct file *filp) +static void stl_shutdown(struct tty_port *port) { - struct stlport *portp; - struct tty_port *port; - unsigned long flags; - - pr_debug("stl_close(tty=%p,filp=%p)\n", tty, filp); - - portp = tty->driver_data; - BUG_ON(portp == NULL); - - port = &portp->port; - - if (tty_port_close_start(port, tty, filp) == 0) - return; -/* - * May want to wait for any data to drain before closing. The BUSY - * flag keeps track of whether we are still sending or not - it is - * very accurate for the cd1400, not quite so for the sc26198. - * (The sc26198 has no "end-of-data" interrupt only empty FIFO) - */ - stl_waituntilsent(tty, (HZ / 2)); - - spin_lock_irqsave(&port->lock, flags); - portp->port.flags &= ~ASYNC_INITIALIZED; - spin_unlock_irqrestore(&port->lock, flags); - + struct stlport *portp = container_of(port, struct stlport, port); stl_disableintrs(portp); - if (tty->termios->c_cflag & HUPCL) - stl_setsignals(portp, 0, 0); stl_enablerxtx(portp, 0, 0); - stl_flushbuffer(tty); + stl_flush(portp); portp->istate = 0; if (portp->tx.buf != NULL) { kfree(portp->tx.buf); @@ -865,9 +833,16 @@ static void stl_close(struct tty_struct *tty, struct file *filp) portp->tx.head = NULL; portp->tx.tail = NULL; } +} + +static void stl_close(struct tty_struct *tty, struct file *filp) +{ + struct stlport*portp; + pr_debug("stl_close(tty=%p,filp=%p)\n", tty, filp); - tty_port_close_end(port, tty); - tty_port_tty_set(port, NULL); + portp = tty->driver_data; + BUG_ON(portp == NULL); + tty_port_close(&portp->port, tty, filp); } /*****************************************************************************/ @@ -1314,35 +1289,12 @@ static void stl_stop(struct tty_struct *tty) static void stl_hangup(struct tty_struct *tty) { - struct stlport *portp; - struct tty_port *port; - unsigned long flags; - + struct stlport *portp = tty->driver_data; pr_debug("stl_hangup(tty=%p)\n", tty); - portp = tty->driver_data; if (portp == NULL) return; - port = &portp->port; - - spin_lock_irqsave(&port->lock, flags); - port->flags &= ~ASYNC_INITIALIZED; - spin_unlock_irqrestore(&port->lock, flags); - - stl_disableintrs(portp); - if (tty->termios->c_cflag & HUPCL) - stl_setsignals(portp, 0, 0); - stl_enablerxtx(portp, 0, 0); - stl_flushbuffer(tty); - portp->istate = 0; - set_bit(TTY_IO_ERROR, &tty->flags); - if (portp->tx.buf != NULL) { - kfree(portp->tx.buf); - portp->tx.buf = NULL; - portp->tx.head = NULL; - portp->tx.tail = NULL; - } - tty_port_hangup(port); + tty_port_hangup(&portp->port); } /*****************************************************************************/ @@ -2486,18 +2438,19 @@ static int stl_getbrdstruct(struct stlbrd __user *arg) * collection. */ -static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, unsigned long arg) +static long stl_memioctl(struct file *fp, unsigned int cmd, unsigned long arg) { int brdnr, rc; void __user *argp = (void __user *)arg; - pr_debug("stl_memioctl(ip=%p,fp=%p,cmd=%x,arg=%lx)\n", ip, fp, cmd,arg); + pr_debug("stl_memioctl(fp=%p,cmd=%x,arg=%lx)\n", fp, cmd,arg); - brdnr = iminor(ip); + brdnr = iminor(fp->f_dentry->d_inode); if (brdnr >= STL_MAXBRDS) return -ENODEV; rc = 0; + lock_kernel(); switch (cmd) { case COM_GETPORTSTATS: rc = stl_getportstats(NULL, NULL, argp); @@ -2518,7 +2471,7 @@ static int stl_memioctl(struct inode *ip, struct file *fp, unsigned int cmd, uns rc = -ENOIOCTLCMD; break; } - + unlock_kernel(); return rc; } @@ -2549,6 +2502,8 @@ static const struct tty_operations stl_ops = { static const struct tty_port_operations stl_port_ops = { .carrier_raised = stl_carrier_raised, .dtr_rts = stl_dtr_rts, + .activate = stl_activate, + .shutdown = stl_shutdown, }; /*****************************************************************************/ diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c index 44203ff599da..1ae2de7d8b4f 100644 --- a/drivers/char/sysrq.c +++ b/drivers/char/sysrq.c @@ -339,7 +339,7 @@ static struct sysrq_key_op sysrq_term_op = { static void moom_callback(struct work_struct *ignored) { - out_of_memory(node_zonelist(0, GFP_KERNEL), GFP_KERNEL, 0); + out_of_memory(node_zonelist(0, GFP_KERNEL), GFP_KERNEL, 0, NULL); } static DECLARE_WORK(moom_work, moom_callback); diff --git a/drivers/char/toshiba.c b/drivers/char/toshiba.c index 663cd15d7c78..f8bc79f6de34 100644 --- a/drivers/char/toshiba.c +++ b/drivers/char/toshiba.c @@ -68,7 +68,7 @@ #include <linux/stat.h> #include <linux/proc_fs.h> #include <linux/seq_file.h> - +#include <linux/smp_lock.h> #include <linux/toshiba.h> #define TOSH_MINOR_DEV 181 @@ -88,13 +88,13 @@ static int tosh_date; static int tosh_sci; static int tosh_fan; -static int tosh_ioctl(struct inode *, struct file *, unsigned int, +static long tosh_ioctl(struct file *, unsigned int, unsigned long); static const struct file_operations tosh_fops = { .owner = THIS_MODULE, - .ioctl = tosh_ioctl, + .unlocked_ioctl = tosh_ioctl, }; static struct miscdevice tosh_device = { @@ -252,8 +252,7 @@ int tosh_smm(SMMRegisters *regs) EXPORT_SYMBOL(tosh_smm); -static int tosh_ioctl(struct inode *ip, struct file *fp, unsigned int cmd, - unsigned long arg) +static long tosh_ioctl(struct file *fp, unsigned int cmd, unsigned long arg) { SMMRegisters regs; SMMRegisters __user *argp = (SMMRegisters __user *)arg; @@ -275,13 +274,16 @@ static int tosh_ioctl(struct inode *ip, struct file *fp, unsigned int cmd, return -EINVAL; /* do we need to emulate the fan ? */ + lock_kernel(); if (tosh_fan==1) { if (((ax==0xf300) || (ax==0xf400)) && (bx==0x0004)) { err = tosh_emulate_fan(®s); + unlock_kernel(); break; } } err = tosh_smm(®s); + unlock_kernel(); break; default: return -EINVAL; diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 59499ee0fe6a..f15df40bc318 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -142,7 +142,6 @@ ssize_t redirected_tty_write(struct file *, const char __user *, size_t, loff_t *); static unsigned int tty_poll(struct file *, poll_table *); static int tty_open(struct inode *, struct file *); -static int tty_release(struct inode *, struct file *); long tty_ioctl(struct file *file, unsigned int cmd, unsigned long arg); #ifdef CONFIG_COMPAT static long tty_compat_ioctl(struct file *file, unsigned int cmd, @@ -506,8 +505,6 @@ static void do_tty_hangup(struct work_struct *work) if (!tty) return; - /* inuse_filps is protected by the single kernel lock */ - lock_kernel(); spin_lock(&redirect_lock); if (redirect && redirect->private_data == tty) { @@ -516,7 +513,10 @@ static void do_tty_hangup(struct work_struct *work) } spin_unlock(&redirect_lock); + /* inuse_filps is protected by the single kernel lock */ + lock_kernel(); check_tty_count(tty, "do_tty_hangup"); + file_list_lock(); /* This breaks for file handles being sent over AF_UNIX sockets ? */ list_for_each_entry(filp, &tty->tty_files, f_u.fu_list) { @@ -708,6 +708,8 @@ void disassociate_ctty(int on_exit) struct tty_struct *tty; struct pid *tty_pgrp = NULL; + if (!current->signal->leader) + return; tty = get_current_tty(); if (tty) { @@ -773,8 +775,7 @@ void no_tty(void) { struct task_struct *tsk = current; lock_kernel(); - if (tsk->signal->leader) - disassociate_ctty(0); + disassociate_ctty(0); unlock_kernel(); proc_clear_tty(tsk); } @@ -1017,14 +1018,16 @@ out: void tty_write_message(struct tty_struct *tty, char *msg) { - lock_kernel(); if (tty) { mutex_lock(&tty->atomic_write_lock); - if (tty->ops->write && !test_bit(TTY_CLOSING, &tty->flags)) + lock_kernel(); + if (tty->ops->write && !test_bit(TTY_CLOSING, &tty->flags)) { + unlock_kernel(); tty->ops->write(tty, msg, strlen(msg)); + } else + unlock_kernel(); tty_write_unlock(tty); } - unlock_kernel(); return; } @@ -1202,14 +1205,21 @@ static int tty_driver_install_tty(struct tty_driver *driver, struct tty_struct *tty) { int idx = tty->index; + int ret; - if (driver->ops->install) - return driver->ops->install(driver, tty); + if (driver->ops->install) { + lock_kernel(); + ret = driver->ops->install(driver, tty); + unlock_kernel(); + return ret; + } if (tty_init_termios(tty) == 0) { + lock_kernel(); tty_driver_kref_get(driver); tty->count++; driver->ttys[idx] = tty; + unlock_kernel(); return 0; } return -ENOMEM; @@ -1302,10 +1312,14 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx, struct tty_struct *tty; int retval; + lock_kernel(); /* Check if pty master is being opened multiple times */ if (driver->subtype == PTY_TYPE_MASTER && - (driver->flags & TTY_DRIVER_DEVPTS_MEM) && !first_ok) + (driver->flags & TTY_DRIVER_DEVPTS_MEM) && !first_ok) { + unlock_kernel(); return ERR_PTR(-EIO); + } + unlock_kernel(); /* * First time open is complex, especially for PTY devices. @@ -1335,7 +1349,6 @@ struct tty_struct *tty_init_dev(struct tty_driver *driver, int idx, * If we fail here just call release_tty to clean up. No need * to decrement the use counts, as release_tty doesn't care. */ - retval = tty_ldisc_setup(tty, tty->link); if (retval) goto release_mem_out; @@ -1350,7 +1363,9 @@ release_mem_out: if (printk_ratelimit()) printk(KERN_INFO "tty_init_dev: ldisc open failed, " "clearing slot %d\n", idx); + lock_kernel(); release_tty(tty, idx); + unlock_kernel(); return ERR_PTR(retval); } @@ -1464,7 +1479,17 @@ static void release_tty(struct tty_struct *tty, int idx) tty_kref_put(tty); } -/* +/** + * tty_release - vfs callback for close + * @inode: inode of tty + * @filp: file pointer for handle to tty + * + * Called the last time each file handle is closed that references + * this tty. There may however be several such references. + * + * Locking: + * Takes bkl. See tty_release_dev + * * Even releasing the tty structures is a tricky business.. We have * to be very careful that the structures are all released at the * same time, as interrupts might otherwise get the wrong pointers. @@ -1472,20 +1497,20 @@ static void release_tty(struct tty_struct *tty, int idx) * WSH 09/09/97: rewritten to avoid some nasty race conditions that could * lead to double frees or releasing memory still in use. */ -void tty_release_dev(struct file *filp) + +int tty_release(struct inode *inode, struct file *filp) { struct tty_struct *tty, *o_tty; int pty_master, tty_closing, o_tty_closing, do_sleep; int devpts; int idx; char buf[64]; - struct inode *inode; - inode = filp->f_path.dentry->d_inode; tty = (struct tty_struct *)filp->private_data; if (tty_paranoia_check(tty, inode, "tty_release_dev")) - return; + return 0; + lock_kernel(); check_tty_count(tty, "tty_release_dev"); tty_fasync(-1, filp, 0); @@ -1500,19 +1525,22 @@ void tty_release_dev(struct file *filp) if (idx < 0 || idx >= tty->driver->num) { printk(KERN_DEBUG "tty_release_dev: bad idx when trying to " "free (%s)\n", tty->name); - return; + unlock_kernel(); + return 0; } if (!devpts) { if (tty != tty->driver->ttys[idx]) { + unlock_kernel(); printk(KERN_DEBUG "tty_release_dev: driver.table[%d] not tty " "for (%s)\n", idx, tty->name); - return; + return 0; } if (tty->termios != tty->driver->termios[idx]) { + unlock_kernel(); printk(KERN_DEBUG "tty_release_dev: driver.termios[%d] not termios " "for (%s)\n", idx, tty->name); - return; + return 0; } } #endif @@ -1526,26 +1554,30 @@ void tty_release_dev(struct file *filp) if (tty->driver->other && !(tty->driver->flags & TTY_DRIVER_DEVPTS_MEM)) { if (o_tty != tty->driver->other->ttys[idx]) { + unlock_kernel(); printk(KERN_DEBUG "tty_release_dev: other->table[%d] " "not o_tty for (%s)\n", idx, tty->name); - return; + return 0 ; } if (o_tty->termios != tty->driver->other->termios[idx]) { + unlock_kernel(); printk(KERN_DEBUG "tty_release_dev: other->termios[%d] " "not o_termios for (%s)\n", idx, tty->name); - return; + return 0; } if (o_tty->link != tty) { + unlock_kernel(); printk(KERN_DEBUG "tty_release_dev: bad pty pointers\n"); - return; + return 0; } } #endif if (tty->ops->close) tty->ops->close(tty, filp); + unlock_kernel(); /* * Sanity check: if tty->count is going to zero, there shouldn't be * any waiters on tty->read_wait or tty->write_wait. We test the @@ -1568,6 +1600,7 @@ void tty_release_dev(struct file *filp) opens on /dev/tty */ mutex_lock(&tty_mutex); + lock_kernel(); tty_closing = tty->count <= 1; o_tty_closing = o_tty && (o_tty->count <= (pty_master ? 1 : 0)); @@ -1598,6 +1631,7 @@ void tty_release_dev(struct file *filp) printk(KERN_WARNING "tty_release_dev: %s: read/write wait queue " "active!\n", tty_name(tty, buf)); + unlock_kernel(); mutex_unlock(&tty_mutex); schedule(); } @@ -1661,8 +1695,10 @@ void tty_release_dev(struct file *filp) mutex_unlock(&tty_mutex); /* check whether both sides are closing ... */ - if (!tty_closing || (o_tty && !o_tty_closing)) - return; + if (!tty_closing || (o_tty && !o_tty_closing)) { + unlock_kernel(); + return 0; + } #ifdef TTY_DEBUG_HANGUP printk(KERN_DEBUG "freeing tty structure..."); @@ -1680,10 +1716,12 @@ void tty_release_dev(struct file *filp) /* Make this pty number available for reallocation */ if (devpts) devpts_kill_index(inode, idx); + unlock_kernel(); + return 0; } /** - * __tty_open - open a tty device + * tty_open - open a tty device * @inode: inode of device file * @filp: file pointer to tty * @@ -1703,7 +1741,7 @@ void tty_release_dev(struct file *filp) * ->siglock protects ->signal/->sighand */ -static int __tty_open(struct inode *inode, struct file *filp) +static int tty_open(struct inode *inode, struct file *filp) { struct tty_struct *tty = NULL; int noctty, retval; @@ -1720,10 +1758,12 @@ retry_open: retval = 0; mutex_lock(&tty_mutex); + lock_kernel(); if (device == MKDEV(TTYAUX_MAJOR, 0)) { tty = get_current_tty(); if (!tty) { + unlock_kernel(); mutex_unlock(&tty_mutex); return -ENXIO; } @@ -1755,12 +1795,14 @@ retry_open: goto got_driver; } } + unlock_kernel(); mutex_unlock(&tty_mutex); return -ENODEV; } driver = get_tty_driver(device, &index); if (!driver) { + unlock_kernel(); mutex_unlock(&tty_mutex); return -ENODEV; } @@ -1770,6 +1812,7 @@ got_driver: tty = tty_driver_lookup_tty(driver, inode, index); if (IS_ERR(tty)) { + unlock_kernel(); mutex_unlock(&tty_mutex); return PTR_ERR(tty); } @@ -1784,8 +1827,10 @@ got_driver: mutex_unlock(&tty_mutex); tty_driver_kref_put(driver); - if (IS_ERR(tty)) + if (IS_ERR(tty)) { + unlock_kernel(); return PTR_ERR(tty); + } filp->private_data = tty; file_move(filp, &tty->tty_files); @@ -1813,11 +1858,15 @@ got_driver: printk(KERN_DEBUG "error %d in opening %s...", retval, tty->name); #endif - tty_release_dev(filp); - if (retval != -ERESTARTSYS) + tty_release(inode, filp); + if (retval != -ERESTARTSYS) { + unlock_kernel(); return retval; - if (signal_pending(current)) + } + if (signal_pending(current)) { + unlock_kernel(); return retval; + } schedule(); /* * Need to reset f_op in case a hangup happened. @@ -1826,8 +1875,11 @@ got_driver: filp->f_op = &tty_fops; goto retry_open; } + unlock_kernel(); + mutex_lock(&tty_mutex); + lock_kernel(); spin_lock_irq(¤t->sighand->siglock); if (!noctty && current->signal->leader && @@ -1835,45 +1887,14 @@ got_driver: tty->session == NULL) __proc_set_tty(current, tty); spin_unlock_irq(¤t->sighand->siglock); + unlock_kernel(); mutex_unlock(&tty_mutex); return 0; } -/* BKL pushdown: scary code avoidance wrapper */ -static int tty_open(struct inode *inode, struct file *filp) -{ - int ret; - - lock_kernel(); - ret = __tty_open(inode, filp); - unlock_kernel(); - return ret; -} - - /** - * tty_release - vfs callback for close - * @inode: inode of tty - * @filp: file pointer for handle to tty - * - * Called the last time each file handle is closed that references - * this tty. There may however be several such references. - * - * Locking: - * Takes bkl. See tty_release_dev - */ - -static int tty_release(struct inode *inode, struct file *filp) -{ - lock_kernel(); - tty_release_dev(filp); - unlock_kernel(); - return 0; -} - -/** * tty_poll - check tty status * @filp: file being polled * @wait: poll wait structures to update @@ -2317,9 +2338,7 @@ static int tiocsetd(struct tty_struct *tty, int __user *p) if (get_user(ldisc, p)) return -EFAULT; - lock_kernel(); ret = tty_set_ldisc(tty, ldisc); - unlock_kernel(); return ret; } diff --git a/drivers/char/tty_ldisc.c b/drivers/char/tty_ldisc.c index feb55075819b..3f653f7d849f 100644 --- a/drivers/char/tty_ldisc.c +++ b/drivers/char/tty_ldisc.c @@ -34,6 +34,8 @@ #include <linux/vt_kern.h> #include <linux/selection.h> +#include <linux/smp_lock.h> /* For the moment */ + #include <linux/kmod.h> #include <linux/nsproxy.h> @@ -443,8 +445,14 @@ static void tty_set_termios_ldisc(struct tty_struct *tty, int num) static int tty_ldisc_open(struct tty_struct *tty, struct tty_ldisc *ld) { WARN_ON(test_and_set_bit(TTY_LDISC_OPEN, &tty->flags)); - if (ld->ops->open) - return ld->ops->open(tty); + if (ld->ops->open) { + int ret; + /* BKL here locks verus a hangup event */ + lock_kernel(); + ret = ld->ops->open(tty); + unlock_kernel(); + return ret; + } return 0; } @@ -545,6 +553,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) if (IS_ERR(new_ldisc)) return PTR_ERR(new_ldisc); + lock_kernel(); /* * We need to look at the tty locking here for pty/tty pairs * when both sides try to change in parallel. @@ -558,10 +567,12 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) */ if (tty->ldisc->ops->num == ldisc) { + unlock_kernel(); tty_ldisc_put(new_ldisc); return 0; } + unlock_kernel(); /* * Problem: What do we do if this blocks ? * We could deadlock here @@ -582,6 +593,9 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) test_bit(TTY_LDISC_CHANGING, &tty->flags) == 0); mutex_lock(&tty->ldisc_mutex); } + + lock_kernel(); + set_bit(TTY_LDISC_CHANGING, &tty->flags); /* @@ -592,6 +606,8 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) tty->receive_room = 0; o_ldisc = tty->ldisc; + + unlock_kernel(); /* * Make sure we don't change while someone holds a * reference to the line discipline. The TTY_LDISC bit @@ -617,12 +633,14 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) flush_scheduled_work(); mutex_lock(&tty->ldisc_mutex); + lock_kernel(); if (test_bit(TTY_HUPPED, &tty->flags)) { /* We were raced by the hangup method. It will have stomped the ldisc data and closed the ldisc down */ clear_bit(TTY_LDISC_CHANGING, &tty->flags); mutex_unlock(&tty->ldisc_mutex); tty_ldisc_put(new_ldisc); + unlock_kernel(); return -EIO; } @@ -664,6 +682,7 @@ int tty_set_ldisc(struct tty_struct *tty, int ldisc) if (o_work) schedule_delayed_work(&o_tty->buf.work, 1); mutex_unlock(&tty->ldisc_mutex); + unlock_kernel(); return retval; } diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index c63f3d33914a..be492dd66437 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -25,19 +25,21 @@ void tty_port_init(struct tty_port *port) init_waitqueue_head(&port->close_wait); init_waitqueue_head(&port->delta_msr_wait); mutex_init(&port->mutex); + mutex_init(&port->buf_mutex); spin_lock_init(&port->lock); port->close_delay = (50 * HZ) / 100; port->closing_wait = (3000 * HZ) / 100; + kref_init(&port->kref); } EXPORT_SYMBOL(tty_port_init); int tty_port_alloc_xmit_buf(struct tty_port *port) { /* We may sleep in get_zeroed_page() */ - mutex_lock(&port->mutex); + mutex_lock(&port->buf_mutex); if (port->xmit_buf == NULL) port->xmit_buf = (unsigned char *)get_zeroed_page(GFP_KERNEL); - mutex_unlock(&port->mutex); + mutex_unlock(&port->buf_mutex); if (port->xmit_buf == NULL) return -ENOMEM; return 0; @@ -46,15 +48,32 @@ EXPORT_SYMBOL(tty_port_alloc_xmit_buf); void tty_port_free_xmit_buf(struct tty_port *port) { - mutex_lock(&port->mutex); + mutex_lock(&port->buf_mutex); if (port->xmit_buf != NULL) { free_page((unsigned long)port->xmit_buf); port->xmit_buf = NULL; } - mutex_unlock(&port->mutex); + mutex_unlock(&port->buf_mutex); } EXPORT_SYMBOL(tty_port_free_xmit_buf); +static void tty_port_destructor(struct kref *kref) +{ + struct tty_port *port = container_of(kref, struct tty_port, kref); + if (port->xmit_buf) + free_page((unsigned long)port->xmit_buf); + if (port->ops->destruct) + port->ops->destruct(port); + else + kfree(port); +} + +void tty_port_put(struct tty_port *port) +{ + if (port) + kref_put(&port->kref, tty_port_destructor); +} +EXPORT_SYMBOL(tty_port_put); /** * tty_port_tty_get - get a tty reference @@ -99,10 +118,11 @@ EXPORT_SYMBOL(tty_port_tty_set); static void tty_port_shutdown(struct tty_port *port) { + mutex_lock(&port->mutex); if (port->ops->shutdown && test_and_clear_bit(ASYNCB_INITIALIZED, &port->flags)) port->ops->shutdown(port); - + mutex_unlock(&port->mutex); } /** @@ -120,8 +140,10 @@ void tty_port_hangup(struct tty_port *port) spin_lock_irqsave(&port->lock, flags); port->count = 0; port->flags &= ~ASYNC_NORMAL_ACTIVE; - if (port->tty) + if (port->tty) { + set_bit(TTY_IO_ERROR, &port->tty->flags); tty_kref_put(port->tty); + } port->tty = NULL; spin_unlock_irqrestore(&port->lock, flags); wake_up_interruptible(&port->open_wait); @@ -198,7 +220,7 @@ EXPORT_SYMBOL(tty_port_lower_dtr_rts); * management of these lines. Note that the dtr/rts raise is done each * iteration as a hangup may have previously dropped them while we wait. */ - + int tty_port_block_til_ready(struct tty_port *port, struct tty_struct *tty, struct file *filp) { @@ -253,7 +275,8 @@ int tty_port_block_til_ready(struct tty_port *port, tty_port_raise_dtr_rts(port); prepare_to_wait(&port->open_wait, &wait, TASK_INTERRUPTIBLE); - /* Check for a hangup or uninitialised port. Return accordingly */ + /* Check for a hangup or uninitialised port. + Return accordingly */ if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) { if (port->flags & ASYNC_HUP_NOTIFY) retval = -EAGAIN; @@ -285,11 +308,11 @@ int tty_port_block_til_ready(struct tty_port *port, port->flags |= ASYNC_NORMAL_ACTIVE; spin_unlock_irqrestore(&port->lock, flags); return retval; - } EXPORT_SYMBOL(tty_port_block_til_ready); -int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct file *filp) +int tty_port_close_start(struct tty_port *port, + struct tty_struct *tty, struct file *filp) { unsigned long flags; @@ -299,7 +322,7 @@ int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct f return 0; } - if( tty->count == 1 && port->count != 1) { + if (tty->count == 1 && port->count != 1) { printk(KERN_WARNING "tty_port_close_start: tty->count = 1 port count = %d.\n", port->count); @@ -331,12 +354,20 @@ int tty_port_close_start(struct tty_port *port, struct tty_struct *tty, struct f long timeout; if (bps > 1200) - timeout = max_t(long, (HZ * 10 * port->drain_delay) / bps, - HZ / 10); + timeout = max_t(long, + (HZ * 10 * port->drain_delay) / bps, HZ / 10); else timeout = 2 * HZ; schedule_timeout_interruptible(timeout); } + /* Flush the ldisc buffering */ + tty_ldisc_flush(tty); + + /* Drop DTR/RTS if HUPCL is set. This causes any attached modem to + hang up the line */ + if (tty->termios->c_cflag & HUPCL) + tty_port_lower_dtr_rts(port); + /* Don't call port->drop for the last reference. Callers will want to drop the last active reference in ->shutdown() or the tty shutdown path */ @@ -348,11 +379,6 @@ void tty_port_close_end(struct tty_port *port, struct tty_struct *tty) { unsigned long flags; - tty_ldisc_flush(tty); - - if (tty->termios->c_cflag & HUPCL) - tty_port_lower_dtr_rts(port); - spin_lock_irqsave(&port->lock, flags); tty->closing = 0; @@ -377,7 +403,42 @@ void tty_port_close(struct tty_port *port, struct tty_struct *tty, if (tty_port_close_start(port, tty, filp) == 0) return; tty_port_shutdown(port); + set_bit(TTY_IO_ERROR, &tty->flags); tty_port_close_end(port, tty); tty_port_tty_set(port, NULL); } EXPORT_SYMBOL(tty_port_close); + +int tty_port_open(struct tty_port *port, struct tty_struct *tty, + struct file *filp) +{ + spin_lock_irq(&port->lock); + if (!tty_hung_up_p(filp)) + ++port->count; + spin_unlock_irq(&port->lock); + tty_port_tty_set(port, tty); + + /* + * Do the device-specific open only if the hardware isn't + * already initialized. Serialize open and shutdown using the + * port mutex. + */ + + mutex_lock(&port->mutex); + + if (!test_bit(ASYNCB_INITIALIZED, &port->flags)) { + clear_bit(TTY_IO_ERROR, &tty->flags); + if (port->ops->activate) { + int retval = port->ops->activate(port, tty); + if (retval) { + mutex_unlock(&port->mutex); + return retval; + } + } + set_bit(ASYNCB_INITIALIZED, &port->flags); + } + mutex_unlock(&port->mutex); + return tty_port_block_til_ready(port, tty, filp); +} + +EXPORT_SYMBOL(tty_port_open); diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 1e3d728dbf7e..50faa1fb0f06 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -164,6 +164,9 @@ module_param(default_utf8, int, S_IRUGO | S_IWUSR); int global_cursor_default = -1; module_param(global_cursor_default, int, S_IRUGO | S_IWUSR); +static int cur_default = CUR_DEFAULT; +module_param(cur_default, int, S_IRUGO | S_IWUSR); + /* * ignore_poke: don't unblank the screen when things are typed. This is * mainly for the privacy of braille terminal users. @@ -184,12 +187,10 @@ static DECLARE_WORK(console_work, console_callback); * fg_console is the current virtual console, * last_console is the last used one, * want_console is the console we want to switch to, - * kmsg_redirect is the console for kernel messages, */ int fg_console; int last_console; int want_console = -1; -int kmsg_redirect; /* * For each existing display, we have a pointer to console currently visible @@ -1638,7 +1639,7 @@ static void reset_terminal(struct vc_data *vc, int do_clear) /* do not do set_leds here because this causes an endless tasklet loop when the keyboard hasn't been initialized yet */ - vc->vc_cursor_type = CUR_DEFAULT; + vc->vc_cursor_type = cur_default; vc->vc_complement_mask = vc->vc_s_complement_mask; default_attr(vc); @@ -1840,7 +1841,7 @@ static void do_con_trol(struct tty_struct *tty, struct vc_data *vc, int c) if (vc->vc_par[0]) vc->vc_cursor_type = vc->vc_par[0] | (vc->vc_par[1] << 8) | (vc->vc_par[2] << 16); else - vc->vc_cursor_type = CUR_DEFAULT; + vc->vc_cursor_type = cur_default; return; } break; @@ -2434,6 +2435,37 @@ struct tty_driver *console_driver; #ifdef CONFIG_VT_CONSOLE +/** + * vt_kmsg_redirect() - Sets/gets the kernel message console + * @new: The new virtual terminal number or -1 if the console should stay + * unchanged + * + * By default, the kernel messages are always printed on the current virtual + * console. However, the user may modify that default with the + * TIOCL_SETKMSGREDIRECT ioctl call. + * + * This function sets the kernel message console to be @new. It returns the old + * virtual console number. The virtual terminal number 0 (both as parameter and + * return value) means no redirection (i.e. always printed on the currently + * active console). + * + * The parameter -1 means that only the current console is returned, but the + * value is not modified. You may use the macro vt_get_kmsg_redirect() in that + * case to make the code more understandable. + * + * When the kernel is compiled without CONFIG_VT_CONSOLE, this function ignores + * the parameter and always returns 0. + */ +int vt_kmsg_redirect(int new) +{ + static int kmsg_con; + + if (new != -1) + return xchg(&kmsg_con, new); + else + return kmsg_con; +} + /* * Console on virtual terminal * @@ -2448,6 +2480,7 @@ static void vt_console_print(struct console *co, const char *b, unsigned count) const ushort *start; ushort cnt = 0; ushort myx; + int kmsg_console; /* console busy or not yet initialized */ if (!printable) @@ -2455,8 +2488,9 @@ static void vt_console_print(struct console *co, const char *b, unsigned count) if (!spin_trylock(&printing_lock)) return; - if (kmsg_redirect && vc_cons_allocated(kmsg_redirect - 1)) - vc = vc_cons[kmsg_redirect - 1].d; + kmsg_console = vt_get_kmsg_redirect(); + if (kmsg_console && vc_cons_allocated(kmsg_console - 1)) + vc = vc_cons[kmsg_console - 1].d; /* read `x' only after setting currcons properly (otherwise the `x' macro will read the x of the foreground console). */ @@ -2613,7 +2647,7 @@ int tioclinux(struct tty_struct *tty, unsigned long arg) ret = set_vesa_blanking(p); break; case TIOCL_GETKMSGREDIRECT: - data = kmsg_redirect; + data = vt_get_kmsg_redirect(); ret = __put_user(data, p); break; case TIOCL_SETKMSGREDIRECT: @@ -2623,7 +2657,7 @@ int tioclinux(struct tty_struct *tty, unsigned long arg) if (get_user(data, p+1)) ret = -EFAULT; else - kmsg_redirect = data; + vt_kmsg_redirect(data); } break; case TIOCL_GETFGCONSOLE: |