diff options
Diffstat (limited to 'arch/x86/include/asm/numaq')
| -rw-r--r-- | arch/x86/include/asm/numaq/apic.h | 136 | ||||
| -rw-r--r-- | arch/x86/include/asm/numaq/apicdef.h | 14 | ||||
| -rw-r--r-- | arch/x86/include/asm/numaq/ipi.h | 25 | ||||
| -rw-r--r-- | arch/x86/include/asm/numaq/mpparse.h | 7 | ||||
| -rw-r--r-- | arch/x86/include/asm/numaq/wakecpu.h | 43 |
5 files changed, 225 insertions, 0 deletions
diff --git a/arch/x86/include/asm/numaq/apic.h b/arch/x86/include/asm/numaq/apic.h new file mode 100644 index 000000000000..0bf2a06b7a4e --- /dev/null +++ b/arch/x86/include/asm/numaq/apic.h @@ -0,0 +1,136 @@ +#ifndef __ASM_NUMAQ_APIC_H +#define __ASM_NUMAQ_APIC_H + +#include <asm/io.h> +#include <linux/mmzone.h> +#include <linux/nodemask.h> + +#define APIC_DFR_VALUE (APIC_DFR_CLUSTER) + +static inline cpumask_t target_cpus(void) +{ + return CPU_MASK_ALL; +} + +#define NO_BALANCE_IRQ (1) +#define esr_disable (1) + +#define INT_DELIVERY_MODE dest_LowestPrio +#define INT_DEST_MODE 0 /* physical delivery on LOCAL quad */ + +static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid) +{ + return physid_isset(apicid, bitmap); +} +static inline unsigned long check_apicid_present(int bit) +{ + return physid_isset(bit, phys_cpu_present_map); +} +#define apicid_cluster(apicid) (apicid & 0xF0) + +static inline int apic_id_registered(void) +{ + return 1; +} + +static inline void init_apic_ldr(void) +{ + /* Already done in NUMA-Q firmware */ +} + +static inline void setup_apic_routing(void) +{ + printk("Enabling APIC mode: %s. Using %d I/O APICs\n", + "NUMA-Q", nr_ioapics); +} + +/* + * Skip adding the timer int on secondary nodes, which causes + * a small but painful rift in the time-space continuum. + */ +static inline int multi_timer_check(int apic, int irq) +{ + return apic != 0 && irq == 0; +} + +static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map) +{ + /* We don't have a good way to do this yet - hack */ + return physids_promote(0xFUL); +} + +/* Mapping from cpu number to logical apicid */ +extern u8 cpu_2_logical_apicid[]; +static inline int cpu_to_logical_apicid(int cpu) +{ + if (cpu >= NR_CPUS) + return BAD_APICID; + return (int)cpu_2_logical_apicid[cpu]; +} + +/* + * Supporting over 60 cpus on NUMA-Q requires a locality-dependent + * cpu to APIC ID relation to properly interact with the intelligent + * mode of the cluster controller. + */ +static inline int cpu_present_to_apicid(int mps_cpu) +{ + if (mps_cpu < 60) + return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3)); + else + return BAD_APICID; +} + +static inline int apicid_to_node(int logical_apicid) +{ + return logical_apicid >> 4; +} + +static inline physid_mask_t apicid_to_cpu_present(int logical_apicid) +{ + int node = apicid_to_node(logical_apicid); + int cpu = __ffs(logical_apicid & 0xf); + + return physid_mask_of_physid(cpu + 4*node); +} + +extern void *xquad_portio; + +static inline void setup_portio_remap(void) +{ + int num_quads = num_online_nodes(); + + if (num_quads <= 1) + return; + + printk("Remapping cross-quad port I/O for %d quads\n", num_quads); + xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD); + printk("xquad_portio vaddr 0x%08lx, len %08lx\n", + (u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD); +} + +static inline int check_phys_apicid_present(int boot_cpu_physical_apicid) +{ + return (1); +} + +static inline void enable_apic_mode(void) +{ +} + +/* + * We use physical apicids here, not logical, so just return the default + * physical broadcast to stop people from breaking us + */ +static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask) +{ + return (int) 0xF; +} + +/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */ +static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb) +{ + return cpuid_apic >> index_msb; +} + +#endif /* __ASM_NUMAQ_APIC_H */ diff --git a/arch/x86/include/asm/numaq/apicdef.h b/arch/x86/include/asm/numaq/apicdef.h new file mode 100644 index 000000000000..e012a46cc22a --- /dev/null +++ b/arch/x86/include/asm/numaq/apicdef.h @@ -0,0 +1,14 @@ +#ifndef __ASM_NUMAQ_APICDEF_H +#define __ASM_NUMAQ_APICDEF_H + + +#define APIC_ID_MASK (0xF<<24) + +static inline unsigned get_apic_id(unsigned long x) +{ + return (((x)>>24)&0x0F); +} + +#define GET_APIC_ID(x) get_apic_id(x) + +#endif diff --git a/arch/x86/include/asm/numaq/ipi.h b/arch/x86/include/asm/numaq/ipi.h new file mode 100644 index 000000000000..935588d286cf --- /dev/null +++ b/arch/x86/include/asm/numaq/ipi.h @@ -0,0 +1,25 @@ +#ifndef __ASM_NUMAQ_IPI_H +#define __ASM_NUMAQ_IPI_H + +void send_IPI_mask_sequence(cpumask_t, int vector); + +static inline void send_IPI_mask(cpumask_t mask, int vector) +{ + send_IPI_mask_sequence(mask, vector); +} + +static inline void send_IPI_allbutself(int vector) +{ + cpumask_t mask = cpu_online_map; + cpu_clear(smp_processor_id(), mask); + + if (!cpus_empty(mask)) + send_IPI_mask(mask, vector); +} + +static inline void send_IPI_all(int vector) +{ + send_IPI_mask(cpu_online_map, vector); +} + +#endif /* __ASM_NUMAQ_IPI_H */ diff --git a/arch/x86/include/asm/numaq/mpparse.h b/arch/x86/include/asm/numaq/mpparse.h new file mode 100644 index 000000000000..252292e077b6 --- /dev/null +++ b/arch/x86/include/asm/numaq/mpparse.h @@ -0,0 +1,7 @@ +#ifndef __ASM_NUMAQ_MPPARSE_H +#define __ASM_NUMAQ_MPPARSE_H + +extern void numaq_mps_oem_check(struct mp_config_table *mpc, char *oem, + char *productid); + +#endif /* __ASM_NUMAQ_MPPARSE_H */ diff --git a/arch/x86/include/asm/numaq/wakecpu.h b/arch/x86/include/asm/numaq/wakecpu.h new file mode 100644 index 000000000000..c577bda5b1c5 --- /dev/null +++ b/arch/x86/include/asm/numaq/wakecpu.h @@ -0,0 +1,43 @@ +#ifndef __ASM_NUMAQ_WAKECPU_H +#define __ASM_NUMAQ_WAKECPU_H + +/* This file copes with machines that wakeup secondary CPUs by NMIs */ + +#define WAKE_SECONDARY_VIA_NMI + +#define TRAMPOLINE_LOW phys_to_virt(0x8) +#define TRAMPOLINE_HIGH phys_to_virt(0xa) + +#define boot_cpu_apicid boot_cpu_logical_apicid + +/* We don't do anything here because we use NMI's to boot instead */ +static inline void wait_for_init_deassert(atomic_t *deassert) +{ +} + +/* + * Because we use NMIs rather than the INIT-STARTUP sequence to + * bootstrap the CPUs, the APIC may be in a weird state. Kick it. + */ +static inline void smp_callin_clear_local_apic(void) +{ + clear_local_APIC(); +} + +static inline void store_NMI_vector(unsigned short *high, unsigned short *low) +{ + printk("Storing NMI vector\n"); + *high = *((volatile unsigned short *) TRAMPOLINE_HIGH); + *low = *((volatile unsigned short *) TRAMPOLINE_LOW); +} + +static inline void restore_NMI_vector(unsigned short *high, unsigned short *low) +{ + printk("Restoring NMI vector\n"); + *((volatile unsigned short *) TRAMPOLINE_HIGH) = *high; + *((volatile unsigned short *) TRAMPOLINE_LOW) = *low; +} + +#define inquire_remote_apic(apicid) {} + +#endif /* __ASM_NUMAQ_WAKECPU_H */ |