diff options
Diffstat (limited to 'arch/m68k/kernel')
| -rw-r--r-- | arch/m68k/kernel/Makefile | 1 | ||||
| -rw-r--r-- | arch/m68k/kernel/dma.c | 5 | ||||
| -rw-r--r-- | arch/m68k/kernel/entry.S | 452 | ||||
| -rw-r--r-- | arch/m68k/kernel/entry_mm.S | 419 | ||||
| -rw-r--r-- | arch/m68k/kernel/entry_no.S | 130 | ||||
| -rw-r--r-- | arch/m68k/kernel/module.c | 4 | ||||
| -rw-r--r-- | arch/m68k/kernel/pcibios.c | 109 |
7 files changed, 564 insertions, 556 deletions
diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile index 5c7070e21eb7..068ad49210d6 100644 --- a/arch/m68k/kernel/Makefile +++ b/arch/m68k/kernel/Makefile @@ -18,6 +18,7 @@ obj-y += setup.o signal.o sys_m68k.o syscalltable.o time.o traps.o obj-$(CONFIG_MMU_MOTOROLA) += ints.o vectors.o obj-$(CONFIG_MMU_SUN3) += ints.o vectors.o +obj-$(CONFIG_PCI) += pcibios.o ifndef CONFIG_MMU_SUN3 obj-y += dma.o diff --git a/arch/m68k/kernel/dma.c b/arch/m68k/kernel/dma.c index f6daf6e15d2e..e546a5534dd4 100644 --- a/arch/m68k/kernel/dma.c +++ b/arch/m68k/kernel/dma.c @@ -16,7 +16,7 @@ #include <asm/pgalloc.h> -#ifdef CONFIG_MMU +#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE) void *dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t flag) @@ -96,7 +96,7 @@ void dma_free_coherent(struct device *dev, size_t size, free_pages((unsigned long)vaddr, get_order(size)); } -#endif /* CONFIG_MMU */ +#endif /* CONFIG_MMU && !CONFIG_COLDFIRE */ EXPORT_SYMBOL(dma_alloc_coherent); EXPORT_SYMBOL(dma_free_coherent); @@ -105,6 +105,7 @@ void dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir) { switch (dir) { + case DMA_BIDIRECTIONAL: case DMA_TO_DEVICE: cache_push(handle, size); break; diff --git a/arch/m68k/kernel/entry.S b/arch/m68k/kernel/entry.S index b8daf64e347d..165ee9f9d5c9 100644 --- a/arch/m68k/kernel/entry.S +++ b/arch/m68k/kernel/entry.S @@ -1,5 +1,451 @@ -#if defined(CONFIG_MMU) && !defined(CONFIG_COLDFIRE) -#include "entry_mm.S" +/* -*- mode: asm -*- + * + * linux/arch/m68k/kernel/entry.S + * + * Copyright (C) 1991, 1992 Linus Torvalds + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file README.legal in the main directory of this archive + * for more details. + * + * Linux/m68k support by Hamish Macdonald + * + * 68060 fixes by Jesper Skov + * + */ + +/* + * entry.S contains the system-call and fault low-level handling routines. + * This also contains the timer-interrupt handler, as well as all interrupts + * and faults that can result in a task-switch. + * + * NOTE: This code handles signal-recognition, which happens every time + * after a timer-interrupt and after each system call. + * + */ + +/* + * 12/03/96 Jes: Currently we only support m68k single-cpu systems, so + * all pointers that used to be 'current' are now entry + * number 0 in the 'current_set' list. + * + * 6/05/00 RZ: addedd writeback completion after return from sighandler + * for 68040 + */ + +#include <linux/linkage.h> +#include <asm/errno.h> +#include <asm/setup.h> +#include <asm/segment.h> +#include <asm/traps.h> +#include <asm/unistd.h> +#include <asm/asm-offsets.h> +#include <asm/entry.h> + +.globl system_call, buserr, trap, resume +.globl sys_call_table +.globl sys_fork, sys_clone, sys_vfork +.globl ret_from_interrupt, bad_interrupt +.globl auto_irqhandler_fixup +.globl user_irqvec_fixup + +.text +ENTRY(sys_fork) + SAVE_SWITCH_STACK + pea %sp@(SWITCH_STACK_SIZE) + jbsr m68k_fork + addql #4,%sp + RESTORE_SWITCH_STACK + rts + +ENTRY(sys_clone) + SAVE_SWITCH_STACK + pea %sp@(SWITCH_STACK_SIZE) + jbsr m68k_clone + addql #4,%sp + RESTORE_SWITCH_STACK + rts + +ENTRY(sys_vfork) + SAVE_SWITCH_STACK + pea %sp@(SWITCH_STACK_SIZE) + jbsr m68k_vfork + addql #4,%sp + RESTORE_SWITCH_STACK + rts + +ENTRY(sys_sigreturn) + SAVE_SWITCH_STACK + jbsr do_sigreturn + RESTORE_SWITCH_STACK + rts + +ENTRY(sys_rt_sigreturn) + SAVE_SWITCH_STACK + jbsr do_rt_sigreturn + RESTORE_SWITCH_STACK + rts + +ENTRY(buserr) + SAVE_ALL_INT + GET_CURRENT(%d0) + movel %sp,%sp@- | stack frame pointer argument + jbsr buserr_c + addql #4,%sp + jra ret_from_exception + +ENTRY(trap) + SAVE_ALL_INT + GET_CURRENT(%d0) + movel %sp,%sp@- | stack frame pointer argument + jbsr trap_c + addql #4,%sp + jra ret_from_exception + + | After a fork we jump here directly from resume, + | so that %d1 contains the previous task + | schedule_tail now used regardless of CONFIG_SMP +ENTRY(ret_from_fork) + movel %d1,%sp@- + jsr schedule_tail + addql #4,%sp + jra ret_from_exception + +#if defined(CONFIG_COLDFIRE) || !defined(CONFIG_MMU) + +#ifdef TRAP_DBG_INTERRUPT + +.globl dbginterrupt +ENTRY(dbginterrupt) + SAVE_ALL_INT + GET_CURRENT(%d0) + movel %sp,%sp@- /* stack frame pointer argument */ + jsr dbginterrupt_c + addql #4,%sp + jra ret_from_exception +#endif + +ENTRY(reschedule) + /* save top of frame */ + pea %sp@ + jbsr set_esp0 + addql #4,%sp + pea ret_from_exception + jmp schedule + +ENTRY(ret_from_user_signal) + moveq #__NR_sigreturn,%d0 + trap #0 + +ENTRY(ret_from_user_rt_signal) + movel #__NR_rt_sigreturn,%d0 + trap #0 + #else -#include "entry_no.S" + +do_trace_entry: + movel #-ENOSYS,%sp@(PT_OFF_D0)| needed for strace + subql #4,%sp + SAVE_SWITCH_STACK + jbsr syscall_trace + RESTORE_SWITCH_STACK + addql #4,%sp + movel %sp@(PT_OFF_ORIG_D0),%d0 + cmpl #NR_syscalls,%d0 + jcs syscall +badsys: + movel #-ENOSYS,%sp@(PT_OFF_D0) + jra ret_from_syscall + +do_trace_exit: + subql #4,%sp + SAVE_SWITCH_STACK + jbsr syscall_trace + RESTORE_SWITCH_STACK + addql #4,%sp + jra .Lret_from_exception + +ENTRY(ret_from_signal) + movel %curptr@(TASK_STACK),%a1 + tstb %a1@(TINFO_FLAGS+2) + jge 1f + jbsr syscall_trace +1: RESTORE_SWITCH_STACK + addql #4,%sp +/* on 68040 complete pending writebacks if any */ +#ifdef CONFIG_M68040 + bfextu %sp@(PT_OFF_FORMATVEC){#0,#4},%d0 + subql #7,%d0 | bus error frame ? + jbne 1f + movel %sp,%sp@- + jbsr berr_040cleanup + addql #4,%sp +1: +#endif + jra .Lret_from_exception + +ENTRY(system_call) + SAVE_ALL_SYS + + GET_CURRENT(%d1) + movel %d1,%a1 + + | save top of frame + movel %sp,%curptr@(TASK_THREAD+THREAD_ESP0) + + | syscall trace? + tstb %a1@(TINFO_FLAGS+2) + jmi do_trace_entry + cmpl #NR_syscalls,%d0 + jcc badsys +syscall: + jbsr @(sys_call_table,%d0:l:4)@(0) + movel %d0,%sp@(PT_OFF_D0) | save the return value +ret_from_syscall: + |oriw #0x0700,%sr + movel %curptr@(TASK_STACK),%a1 + movew %a1@(TINFO_FLAGS+2),%d0 + jne syscall_exit_work +1: RESTORE_ALL + +syscall_exit_work: + btst #5,%sp@(PT_OFF_SR) | check if returning to kernel + bnes 1b | if so, skip resched, signals + lslw #1,%d0 + jcs do_trace_exit + jmi do_delayed_trace + lslw #8,%d0 + jne do_signal_return + pea resume_userspace + jra schedule + + +ENTRY(ret_from_exception) +.Lret_from_exception: + btst #5,%sp@(PT_OFF_SR) | check if returning to kernel + bnes 1f | if so, skip resched, signals + | only allow interrupts when we are really the last one on the + | kernel stack, otherwise stack overflow can occur during + | heavy interrupt load + andw #ALLOWINT,%sr + +resume_userspace: + movel %curptr@(TASK_STACK),%a1 + moveb %a1@(TINFO_FLAGS+3),%d0 + jne exit_work +1: RESTORE_ALL + +exit_work: + | save top of frame + movel %sp,%curptr@(TASK_THREAD+THREAD_ESP0) + lslb #1,%d0 + jne do_signal_return + pea resume_userspace + jra schedule + + +do_signal_return: + |andw #ALLOWINT,%sr + subql #4,%sp | dummy return address + SAVE_SWITCH_STACK + pea %sp@(SWITCH_STACK_SIZE) + bsrl do_notify_resume + addql #4,%sp + RESTORE_SWITCH_STACK + addql #4,%sp + jbra resume_userspace + +do_delayed_trace: + bclr #7,%sp@(PT_OFF_SR) | clear trace bit in SR + pea 1 | send SIGTRAP + movel %curptr,%sp@- + pea LSIGTRAP + jbsr send_sig + addql #8,%sp + addql #4,%sp + jbra resume_userspace + + +/* This is the main interrupt handler for autovector interrupts */ + +ENTRY(auto_inthandler) + SAVE_ALL_INT + GET_CURRENT(%d0) + movel %d0,%a1 + addqb #1,%a1@(TINFO_PREEMPT+1) + | put exception # in d0 + bfextu %sp@(PT_OFF_FORMATVEC){#4,#10},%d0 + subw #VEC_SPUR,%d0 + + movel %sp,%sp@- + movel %d0,%sp@- | put vector # on stack +auto_irqhandler_fixup = . + 2 + jsr do_IRQ | process the IRQ + addql #8,%sp | pop parameters off stack + +ret_from_interrupt: + movel %curptr@(TASK_STACK),%a1 + subqb #1,%a1@(TINFO_PREEMPT+1) + jeq ret_from_last_interrupt +2: RESTORE_ALL + + ALIGN +ret_from_last_interrupt: + moveq #(~ALLOWINT>>8)&0xff,%d0 + andb %sp@(PT_OFF_SR),%d0 + jne 2b + + /* check if we need to do software interrupts */ + tstl irq_stat+CPUSTAT_SOFTIRQ_PENDING + jeq .Lret_from_exception + pea ret_from_exception + jra do_softirq + +/* Handler for user defined interrupt vectors */ + +ENTRY(user_inthandler) + SAVE_ALL_INT + GET_CURRENT(%d0) + movel %d0,%a1 + addqb #1,%a1@(TINFO_PREEMPT+1) + | put exception # in d0 + bfextu %sp@(PT_OFF_FORMATVEC){#4,#10},%d0 +user_irqvec_fixup = . + 2 + subw #VEC_USER,%d0 + + movel %sp,%sp@- + movel %d0,%sp@- | put vector # on stack + jsr do_IRQ | process the IRQ + addql #8,%sp | pop parameters off stack + + movel %curptr@(TASK_STACK),%a1 + subqb #1,%a1@(TINFO_PREEMPT+1) + jeq ret_from_last_interrupt + RESTORE_ALL + +/* Handler for uninitialized and spurious interrupts */ + +ENTRY(bad_inthandler) + SAVE_ALL_INT + GET_CURRENT(%d0) + movel %d0,%a1 + addqb #1,%a1@(TINFO_PREEMPT+1) + + movel %sp,%sp@- + jsr handle_badint + addql #4,%sp + + movel %curptr@(TASK_STACK),%a1 + subqb #1,%a1@(TINFO_PREEMPT+1) + jeq ret_from_last_interrupt + RESTORE_ALL + + +resume: + /* + * Beware - when entering resume, prev (the current task) is + * in a0, next (the new task) is in a1,so don't change these + * registers until their contents are no longer needed. + */ + + /* save sr */ + movew %sr,%a0@(TASK_THREAD+THREAD_SR) + + /* save fs (sfc,%dfc) (may be pointing to kernel memory) */ + movec %sfc,%d0 + movew %d0,%a0@(TASK_THREAD+THREAD_FS) + + /* save usp */ + /* it is better to use a movel here instead of a movew 8*) */ + movec %usp,%d0 + movel %d0,%a0@(TASK_THREAD+THREAD_USP) + + /* save non-scratch registers on stack */ + SAVE_SWITCH_STACK + + /* save current kernel stack pointer */ + movel %sp,%a0@(TASK_THREAD+THREAD_KSP) + + /* save floating point context */ +#ifndef CONFIG_M68KFPU_EMU_ONLY +#ifdef CONFIG_M68KFPU_EMU + tstl m68k_fputype + jeq 3f +#endif + fsave %a0@(TASK_THREAD+THREAD_FPSTATE) + +#if defined(CONFIG_M68060) +#if !defined(CPU_M68060_ONLY) + btst #3,m68k_cputype+3 + beqs 1f +#endif + /* The 060 FPU keeps status in bits 15-8 of the first longword */ + tstb %a0@(TASK_THREAD+THREAD_FPSTATE+2) + jeq 3f +#if !defined(CPU_M68060_ONLY) + jra 2f +#endif +#endif /* CONFIG_M68060 */ +#if !defined(CPU_M68060_ONLY) +1: tstb %a0@(TASK_THREAD+THREAD_FPSTATE) + jeq 3f +#endif +2: fmovemx %fp0-%fp7,%a0@(TASK_THREAD+THREAD_FPREG) + fmoveml %fpcr/%fpsr/%fpiar,%a0@(TASK_THREAD+THREAD_FPCNTL) +3: +#endif /* CONFIG_M68KFPU_EMU_ONLY */ + /* Return previous task in %d1 */ + movel %curptr,%d1 + + /* switch to new task (a1 contains new task) */ + movel %a1,%curptr + + /* restore floating point context */ +#ifndef CONFIG_M68KFPU_EMU_ONLY +#ifdef CONFIG_M68KFPU_EMU + tstl m68k_fputype + jeq 4f +#endif +#if defined(CONFIG_M68060) +#if !defined(CPU_M68060_ONLY) + btst #3,m68k_cputype+3 + beqs 1f +#endif + /* The 060 FPU keeps status in bits 15-8 of the first longword */ + tstb %a1@(TASK_THREAD+THREAD_FPSTATE+2) + jeq 3f +#if !defined(CPU_M68060_ONLY) + jra 2f +#endif +#endif /* CONFIG_M68060 */ +#if !defined(CPU_M68060_ONLY) +1: tstb %a1@(TASK_THREAD+THREAD_FPSTATE) + jeq 3f #endif +2: fmovemx %a1@(TASK_THREAD+THREAD_FPREG),%fp0-%fp7 + fmoveml %a1@(TASK_THREAD+THREAD_FPCNTL),%fpcr/%fpsr/%fpiar +3: frestore %a1@(TASK_THREAD+THREAD_FPSTATE) +4: +#endif /* CONFIG_M68KFPU_EMU_ONLY */ + + /* restore the kernel stack pointer */ + movel %a1@(TASK_THREAD+THREAD_KSP),%sp + + /* restore non-scratch registers */ + RESTORE_SWITCH_STACK + + /* restore user stack pointer */ + movel %a1@(TASK_THREAD+THREAD_USP),%a0 + movel %a0,%usp + + /* restore fs (sfc,%dfc) */ + movew %a1@(TASK_THREAD+THREAD_FS),%a0 + movec %a0,%sfc + movec %a0,%dfc + + /* restore status register */ + movew %a1@(TASK_THREAD+THREAD_SR),%sr + + rts + +#endif /* CONFIG_MMU && !CONFIG_COLDFIRE */ diff --git a/arch/m68k/kernel/entry_mm.S b/arch/m68k/kernel/entry_mm.S deleted file mode 100644 index f29e73ca9dbb..000000000000 --- a/arch/m68k/kernel/entry_mm.S +++ /dev/null @@ -1,419 +0,0 @@ -/* -*- mode: asm -*- - * - * linux/arch/m68k/kernel/entry.S - * - * Copyright (C) 1991, 1992 Linus Torvalds - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file README.legal in the main directory of this archive - * for more details. - * - * Linux/m68k support by Hamish Macdonald - * - * 68060 fixes by Jesper Skov - * - */ - -/* - * entry.S contains the system-call and fault low-level handling routines. - * This also contains the timer-interrupt handler, as well as all interrupts - * and faults that can result in a task-switch. - * - * NOTE: This code handles signal-recognition, which happens every time - * after a timer-interrupt and after each system call. - * - */ - -/* - * 12/03/96 Jes: Currently we only support m68k single-cpu systems, so - * all pointers that used to be 'current' are now entry - * number 0 in the 'current_set' list. - * - * 6/05/00 RZ: addedd writeback completion after return from sighandler - * for 68040 - */ - -#include <linux/linkage.h> -#include <asm/entry.h> -#include <asm/errno.h> -#include <asm/setup.h> -#include <asm/segment.h> -#include <asm/traps.h> -#include <asm/unistd.h> - -#include <asm/asm-offsets.h> - -.globl system_call, buserr, trap, resume -.globl sys_call_table -.globl sys_fork, sys_clone, sys_vfork -.globl ret_from_interrupt, bad_interrupt -.globl auto_irqhandler_fixup -.globl user_irqvec_fixup - -.text -ENTRY(buserr) - SAVE_ALL_INT - GET_CURRENT(%d0) - movel %sp,%sp@- | stack frame pointer argument - bsrl buserr_c - addql #4,%sp - jra .Lret_from_exception - -ENTRY(trap) - SAVE_ALL_INT - GET_CURRENT(%d0) - movel %sp,%sp@- | stack frame pointer argument - bsrl trap_c - addql #4,%sp - jra .Lret_from_exception - - | After a fork we jump here directly from resume, - | so that %d1 contains the previous task - | schedule_tail now used regardless of CONFIG_SMP -ENTRY(ret_from_fork) - movel %d1,%sp@- - jsr schedule_tail - addql #4,%sp - jra .Lret_from_exception - -do_trace_entry: - movel #-ENOSYS,%sp@(PT_OFF_D0)| needed for strace - subql #4,%sp - SAVE_SWITCH_STACK - jbsr syscall_trace - RESTORE_SWITCH_STACK - addql #4,%sp - movel %sp@(PT_OFF_ORIG_D0),%d0 - cmpl #NR_syscalls,%d0 - jcs syscall -badsys: - movel #-ENOSYS,%sp@(PT_OFF_D0) - jra ret_from_syscall - -do_trace_exit: - subql #4,%sp - SAVE_SWITCH_STACK - jbsr syscall_trace - RESTORE_SWITCH_STACK - addql #4,%sp - jra .Lret_from_exception - -ENTRY(ret_from_signal) - movel %curptr@(TASK_STACK),%a1 - tstb %a1@(TINFO_FLAGS+2) - jge 1f - jbsr syscall_trace -1: RESTORE_SWITCH_STACK - addql #4,%sp -/* on 68040 complete pending writebacks if any */ -#ifdef CONFIG_M68040 - bfextu %sp@(PT_OFF_FORMATVEC){#0,#4},%d0 - subql #7,%d0 | bus error frame ? - jbne 1f - movel %sp,%sp@- - jbsr berr_040cleanup - addql #4,%sp -1: -#endif - jra .Lret_from_exception - -ENTRY(system_call) - SAVE_ALL_SYS - - GET_CURRENT(%d1) - movel %d1,%a1 - - | save top of frame - movel %sp,%curptr@(TASK_THREAD+THREAD_ESP0) - - | syscall trace? - tstb %a1@(TINFO_FLAGS+2) - jmi do_trace_entry - cmpl #NR_syscalls,%d0 - jcc badsys -syscall: - jbsr @(sys_call_table,%d0:l:4)@(0) - movel %d0,%sp@(PT_OFF_D0) | save the return value -ret_from_syscall: - |oriw #0x0700,%sr - movel %curptr@(TASK_STACK),%a1 - movew %a1@(TINFO_FLAGS+2),%d0 - jne syscall_exit_work -1: RESTORE_ALL - -syscall_exit_work: - btst #5,%sp@(PT_OFF_SR) | check if returning to kernel - bnes 1b | if so, skip resched, signals - lslw #1,%d0 - jcs do_trace_exit - jmi do_delayed_trace - lslw #8,%d0 - jne do_signal_return - pea resume_userspace - jra schedule - - -ENTRY(ret_from_exception) -.Lret_from_exception: - btst #5,%sp@(PT_OFF_SR) | check if returning to kernel - bnes 1f | if so, skip resched, signals - | only allow interrupts when we are really the last one on the - | kernel stack, otherwise stack overflow can occur during - | heavy interrupt load - andw #ALLOWINT,%sr - -resume_userspace: - movel %curptr@(TASK_STACK),%a1 - moveb %a1@(TINFO_FLAGS+3),%d0 - jne exit_work -1: RESTORE_ALL - -exit_work: - | save top of frame - movel %sp,%curptr@(TASK_THREAD+THREAD_ESP0) - lslb #1,%d0 - jne do_signal_return - pea resume_userspace - jra schedule - - -do_signal_return: - |andw #ALLOWINT,%sr - subql #4,%sp | dummy return address - SAVE_SWITCH_STACK - pea %sp@(SWITCH_STACK_SIZE) - bsrl do_notify_resume - addql #4,%sp - RESTORE_SWITCH_STACK - addql #4,%sp - jbra resume_userspace - -do_delayed_trace: - bclr #7,%sp@(PT_OFF_SR) | clear trace bit in SR - pea 1 | send SIGTRAP - movel %curptr,%sp@- - pea LSIGTRAP - jbsr send_sig - addql #8,%sp - addql #4,%sp - jbra resume_userspace - - -/* This is the main interrupt handler for autovector interrupts */ - -ENTRY(auto_inthandler) - SAVE_ALL_INT - GET_CURRENT(%d0) - movel %d0,%a1 - addqb #1,%a1@(TINFO_PREEMPT+1) - | put exception # in d0 - bfextu %sp@(PT_OFF_FORMATVEC){#4,#10},%d0 - subw #VEC_SPUR,%d0 - - movel %sp,%sp@- - movel %d0,%sp@- | put vector # on stack -auto_irqhandler_fixup = . + 2 - jsr do_IRQ | process the IRQ - addql #8,%sp | pop parameters off stack - -ret_from_interrupt: - movel %curptr@(TASK_STACK),%a1 - subqb #1,%a1@(TINFO_PREEMPT+1) - jeq ret_from_last_interrupt -2: RESTORE_ALL - - ALIGN -ret_from_last_interrupt: - moveq #(~ALLOWINT>>8)&0xff,%d0 - andb %sp@(PT_OFF_SR),%d0 - jne 2b - - /* check if we need to do software interrupts */ - tstl irq_stat+CPUSTAT_SOFTIRQ_PENDING - jeq .Lret_from_exception - pea ret_from_exception - jra do_softirq - -/* Handler for user defined interrupt vectors */ - -ENTRY(user_inthandler) - SAVE_ALL_INT - GET_CURRENT(%d0) - movel %d0,%a1 - addqb #1,%a1@(TINFO_PREEMPT+1) - | put exception # in d0 - bfextu %sp@(PT_OFF_FORMATVEC){#4,#10},%d0 -user_irqvec_fixup = . + 2 - subw #VEC_USER,%d0 - - movel %sp,%sp@- - movel %d0,%sp@- | put vector # on stack - jsr do_IRQ | process the IRQ - addql #8,%sp | pop parameters off stack - - movel %curptr@(TASK_STACK),%a1 - subqb #1,%a1@(TINFO_PREEMPT+1) - jeq ret_from_last_interrupt - RESTORE_ALL - -/* Handler for uninitialized and spurious interrupts */ - -ENTRY(bad_inthandler) - SAVE_ALL_INT - GET_CURRENT(%d0) - movel %d0,%a1 - addqb #1,%a1@(TINFO_PREEMPT+1) - - movel %sp,%sp@- - jsr handle_badint - addql #4,%sp - - movel %curptr@(TASK_STACK),%a1 - subqb #1,%a1@(TINFO_PREEMPT+1) - jeq ret_from_last_interrupt - RESTORE_ALL - - -ENTRY(sys_fork) - SAVE_SWITCH_STACK - pea %sp@(SWITCH_STACK_SIZE) - jbsr m68k_fork - addql #4,%sp - RESTORE_SWITCH_STACK - rts - -ENTRY(sys_clone) - SAVE_SWITCH_STACK - pea %sp@(SWITCH_STACK_SIZE) - jbsr m68k_clone - addql #4,%sp - RESTORE_SWITCH_STACK - rts - -ENTRY(sys_vfork) - SAVE_SWITCH_STACK - pea %sp@(SWITCH_STACK_SIZE) - jbsr m68k_vfork - addql #4,%sp - RESTORE_SWITCH_STACK - rts - -ENTRY(sys_sigreturn) - SAVE_SWITCH_STACK - jbsr do_sigreturn - RESTORE_SWITCH_STACK - rts - -ENTRY(sys_rt_sigreturn) - SAVE_SWITCH_STACK - jbsr do_rt_sigreturn - RESTORE_SWITCH_STACK - rts - -resume: - /* - * Beware - when entering resume, prev (the current task) is - * in a0, next (the new task) is in a1,so don't change these - * registers until their contents are no longer needed. - */ - - /* save sr */ - movew %sr,%a0@(TASK_THREAD+THREAD_SR) - - /* save fs (sfc,%dfc) (may be pointing to kernel memory) */ - movec %sfc,%d0 - movew %d0,%a0@(TASK_THREAD+THREAD_FS) - - /* save usp */ - /* it is better to use a movel here instead of a movew 8*) */ - movec %usp,%d0 - movel %d0,%a0@(TASK_THREAD+THREAD_USP) - - /* save non-scratch registers on stack */ - SAVE_SWITCH_STACK - - /* save current kernel stack pointer */ - movel %sp,%a0@(TASK_THREAD+THREAD_KSP) - - /* save floating point context */ -#ifndef CONFIG_M68KFPU_EMU_ONLY -#ifdef CONFIG_M68KFPU_EMU - tstl m68k_fputype - jeq 3f -#endif - fsave %a0@(TASK_THREAD+THREAD_FPSTATE) - -#if defined(CONFIG_M68060) -#if !defined(CPU_M68060_ONLY) - btst #3,m68k_cputype+3 - beqs 1f -#endif - /* The 060 FPU keeps status in bits 15-8 of the first longword */ - tstb %a0@(TASK_THREAD+THREAD_FPSTATE+2) - jeq 3f -#if !defined(CPU_M68060_ONLY) - jra 2f -#endif -#endif /* CONFIG_M68060 */ -#if !defined(CPU_M68060_ONLY) -1: tstb %a0@(TASK_THREAD+THREAD_FPSTATE) - jeq 3f -#endif -2: fmovemx %fp0-%fp7,%a0@(TASK_THREAD+THREAD_FPREG) - fmoveml %fpcr/%fpsr/%fpiar,%a0@(TASK_THREAD+THREAD_FPCNTL) -3: -#endif /* CONFIG_M68KFPU_EMU_ONLY */ - /* Return previous task in %d1 */ - movel %curptr,%d1 - - /* switch to new task (a1 contains new task) */ - movel %a1,%curptr - - /* restore floating point context */ -#ifndef CONFIG_M68KFPU_EMU_ONLY -#ifdef CONFIG_M68KFPU_EMU - tstl m68k_fputype - jeq 4f -#endif -#if defined(CONFIG_M68060) -#if !defined(CPU_M68060_ONLY) - btst #3,m68k_cputype+3 - beqs 1f -#endif - /* The 060 FPU keeps status in bits 15-8 of the first longword */ - tstb %a1@(TASK_THREAD+THREAD_FPSTATE+2) - jeq 3f -#if !defined(CPU_M68060_ONLY) - jra 2f -#endif -#endif /* CONFIG_M68060 */ -#if !defined(CPU_M68060_ONLY) -1: tstb %a1@(TASK_THREAD+THREAD_FPSTATE) - jeq 3f -#endif -2: fmovemx %a1@(TASK_THREAD+THREAD_FPREG),%fp0-%fp7 - fmoveml %a1@(TASK_THREAD+THREAD_FPCNTL),%fpcr/%fpsr/%fpiar -3: frestore %a1@(TASK_THREAD+THREAD_FPSTATE) -4: -#endif /* CONFIG_M68KFPU_EMU_ONLY */ - - /* restore the kernel stack pointer */ - movel %a1@(TASK_THREAD+THREAD_KSP),%sp - - /* restore non-scratch registers */ - RESTORE_SWITCH_STACK - - /* restore user stack pointer */ - movel %a1@(TASK_THREAD+THREAD_USP),%a0 - movel %a0,%usp - - /* restore fs (sfc,%dfc) */ - movew %a1@(TASK_THREAD+THREAD_FS),%a0 - movec %a0,%sfc - movec %a0,%dfc - - /* restore status register */ - movew %a1@(TASK_THREAD+THREAD_SR),%sr - - rts - diff --git a/arch/m68k/kernel/entry_no.S b/arch/m68k/kernel/entry_no.S deleted file mode 100644 index d80cba45589f..000000000000 --- a/arch/m68k/kernel/entry_no.S +++ /dev/null @@ -1,130 +0,0 @@ -/* - * linux/arch/m68knommu/kernel/entry.S - * - * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com) - * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>, - * Kenneth Albanowski <kjahds@kjahds.com>, - * Copyright (C) 2000 Lineo Inc. (www.lineo.com) - * - * Based on: - * - * linux/arch/m68k/kernel/entry.S - * - * Copyright (C) 1991, 1992 Linus Torvalds - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file README.legal in the main directory of this archive - * for more details. - * - * Linux/m68k support by Hamish Macdonald - * - * 68060 fixes by Jesper Skov - * ColdFire support by Greg Ungerer (gerg@snapgear.com) - * 5307 fixes by David W. Miller - * linux 2.4 support David McCullough <davidm@snapgear.com> - */ - -#include <linux/linkage.h> -#include <asm/errno.h> -#include <asm/setup.h> -#include <asm/segment.h> -#include <asm/asm-offsets.h> -#include <asm/entry.h> -#include <asm/unistd.h> - -.text - -.globl buserr -.globl trap -.globl ret_from_exception -.globl ret_from_signal -.globl sys_fork -.globl sys_clone -.globl sys_vfork - -ENTRY(buserr) - SAVE_ALL_INT - GET_CURRENT(%d0) - movel %sp,%sp@- /* stack frame pointer argument */ - jsr buserr_c - addql #4,%sp - jra ret_from_exception - -ENTRY(trap) - SAVE_ALL_INT - GET_CURRENT(%d0) - movel %sp,%sp@- /* stack frame pointer argument */ - jsr trap_c - addql #4,%sp - jra ret_from_exception - -#ifdef TRAP_DBG_INTERRUPT - -.globl dbginterrupt -ENTRY(dbginterrupt) - SAVE_ALL_INT - GET_CURRENT(%d0) - movel %sp,%sp@- /* stack frame pointer argument */ - jsr dbginterrupt_c - addql #4,%sp - jra ret_from_exception -#endif - -ENTRY(reschedule) - /* save top of frame */ - pea %sp@ - jbsr set_esp0 - addql #4,%sp - pea ret_from_exception - jmp schedule - -ENTRY(ret_from_fork) - movel %d1,%sp@- - jsr schedule_tail - addql #4,%sp - jra ret_from_exception - -ENTRY(sys_fork) - SAVE_SWITCH_STACK - pea %sp@(SWITCH_STACK_SIZE) - jbsr m68k_fork - addql #4,%sp - RESTORE_SWITCH_STACK - rts - -ENTRY(sys_vfork) - SAVE_SWITCH_STACK - pea %sp@(SWITCH_STACK_SIZE) - jbsr m68k_vfork - addql #4,%sp - RESTORE_SWITCH_STACK - rts - -ENTRY(sys_clone) - SAVE_SWITCH_STACK - pea %sp@(SWITCH_STACK_SIZE) - jbsr m68k_clone - addql #4,%sp - RESTORE_SWITCH_STACK - rts - -ENTRY(sys_sigreturn) - SAVE_SWITCH_STACK - jbsr do_sigreturn - RESTORE_SWITCH_STACK - rts - -ENTRY(sys_rt_sigreturn) - SAVE_SWITCH_STACK - jbsr do_rt_sigreturn - RESTORE_SWITCH_STACK - rts - -ENTRY(ret_from_user_signal) - moveq #__NR_sigreturn,%d0 - trap #0 - -ENTRY(ret_from_user_rt_signal) - movel #__NR_rt_sigreturn,%d0 - trap #0 - diff --git a/arch/m68k/kernel/module.c b/arch/m68k/kernel/module.c index 34849c4c6e3d..eb46fd6038ca 100644 --- a/arch/m68k/kernel/module.c +++ b/arch/m68k/kernel/module.c @@ -47,7 +47,7 @@ int apply_relocate(Elf32_Shdr *sechdrs, *location += sym->st_value; break; case R_68K_PC32: - /* Add the value, subtract its postition */ + /* Add the value, subtract its position */ *location += sym->st_value - (uint32_t)location; break; default: @@ -87,7 +87,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, *location = rel[i].r_addend + sym->st_value; break; case R_68K_PC32: - /* Add the value, subtract its postition */ + /* Add the value, subtract its position */ *location = rel[i].r_addend + sym->st_value - (uint32_t)location; break; default: diff --git a/arch/m68k/kernel/pcibios.c b/arch/m68k/kernel/pcibios.c new file mode 100644 index 000000000000..b2988aa1840b --- /dev/null +++ b/arch/m68k/kernel/pcibios.c @@ -0,0 +1,109 @@ +/* + * pci.c -- basic PCI support code + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * (C) Copyright 2011, Greg Ungerer <gerg@uclinux.org> + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/init.h> +#include <linux/pci.h> + +/* + * From arch/i386/kernel/pci-i386.c: + * + * We need to avoid collisions with `mirrored' VGA ports + * and other strange ISA hardware, so we always want the + * addresses to be allocated in the 0x000-0x0ff region + * modulo 0x400. + * + * Why? Because some silly external IO cards only decode + * the low 10 bits of the IO address. The 0x00-0xff region + * is reserved for motherboard devices that decode all 16 + * bits, so it's ok to allocate at, say, 0x2800-0x28ff, + * but we want to try to avoid allocating at 0x2900-0x2bff + * which might be mirrored at 0x0100-0x03ff.. + */ +resource_size_t pcibios_align_resource(void *data, const struct resource *res, + resource_size_t size, resource_size_t align) +{ + resource_size_t start = res->start; + + if ((res->flags & IORESOURCE_IO) && (start & 0x300)) + start = (start + 0x3ff) & ~0x3ff; + + start = (start + align - 1) & ~(align - 1); + + return start; +} + +/* + * This is taken from the ARM code for this. + */ +int pcibios_enable_device(struct pci_dev *dev, int mask) +{ + struct resource *r; + u16 cmd, newcmd; + int idx; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + newcmd = cmd; + + for (idx = 0; idx < 6; idx++) { + /* Only set up the requested stuff */ + if (!(mask & (1 << idx))) + continue; + + r = dev->resource + idx; + if (!r->start && r->end) { + pr_err(KERN_ERR "PCI: Device %s not available because of resource collisions\n", + pci_name(dev)); + return -EINVAL; + } + if (r->flags & IORESOURCE_IO) + newcmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) + newcmd |= PCI_COMMAND_MEMORY; + } + + /* + * Bridges (eg, cardbus bridges) need to be fully enabled + */ + if ((dev->class >> 16) == PCI_BASE_CLASS_BRIDGE) + newcmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY; + + + if (newcmd != cmd) { + pr_info("PCI: enabling device %s (0x%04x -> 0x%04x)\n", + pci_name(dev), cmd, newcmd); + pci_write_config_word(dev, PCI_COMMAND, newcmd); + } + return 0; +} + +void pcibios_update_irq(struct pci_dev *dev, int irq) +{ + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); +} + +void __devinit pcibios_fixup_bus(struct pci_bus *bus) +{ + struct pci_dev *dev; + + list_for_each_entry(dev, &bus->devices, bus_list) { + pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 8); + pci_write_config_byte(dev, PCI_LATENCY_TIMER, 32); + } +} + +char __devinit *pcibios_setup(char *str) +{ + return str; +} + |