summaryrefslogtreecommitdiffstats
path: root/arch/blackfin/mach-bf527
diff options
context:
space:
mode:
Diffstat (limited to 'arch/blackfin/mach-bf527')
-rw-r--r--arch/blackfin/mach-bf527/Kconfig4
-rw-r--r--arch/blackfin/mach-bf527/boards/cm_bf527.c48
-rw-r--r--arch/blackfin/mach-bf527/boards/ezkit.c62
-rw-r--r--arch/blackfin/mach-bf527/include/mach/blackfin.h6
-rw-r--r--arch/blackfin/mach-bf527/include/mach/cdefBF525.h11
-rw-r--r--arch/blackfin/mach-bf527/include/mach/cdefBF527.h424
-rw-r--r--arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h23
-rw-r--r--arch/blackfin/mach-bf527/include/mach/defBF525.h11
-rw-r--r--arch/blackfin/mach-bf527/include/mach/defBF527.h679
-rw-r--r--arch/blackfin/mach-bf527/include/mach/defBF52x_base.h186
10 files changed, 17 insertions, 1437 deletions
diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig
index 848ac6f86823..1f8cbe9d6b9a 100644
--- a/arch/blackfin/mach-bf527/Kconfig
+++ b/arch/blackfin/mach-bf527/Kconfig
@@ -1,3 +1,7 @@
+config BF52x
+ def_bool y
+ depends on (BF522 || BF523 || BF524 || BF525 || BF526 || BF527)
+
if (BF52x)
source "arch/blackfin/mach-bf527/boards/Kconfig"
diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c
index f1996b13a3da..7ab0800e2914 100644
--- a/arch/blackfin/mach-bf527/boards/cm_bf527.c
+++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c
@@ -15,9 +15,6 @@
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/etherdevice.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb/isp1362.h>
-#endif
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
@@ -65,7 +62,7 @@ static struct isp1760_platform_data isp1760_priv = {
};
static struct platform_device bfin_isp1760_device = {
- .name = "isp1760-hcd",
+ .name = "isp1760",
.id = 0,
.dev = {
.platform_data = &isp1760_priv,
@@ -317,45 +314,6 @@ static struct platform_device sl811_hcd_device = {
};
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-static struct resource isp1362_hcd_resources[] = {
- {
- .start = 0x20360000,
- .end = 0x20360000,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0x20360004,
- .end = 0x20360004,
- .flags = IORESOURCE_MEM,
- }, {
- .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
- .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct isp1362_platform_data isp1362_priv = {
- .sel15Kres = 1,
- .clknotstop = 0,
- .oc_enable = 0,
- .int_act_high = 0,
- .int_edge_triggered = 0,
- .remote_wakeup_connected = 0,
- .no_power_switching = 1,
- .power_switching_mode = 0,
-};
-
-static struct platform_device isp1362_hcd_device = {
- .name = "isp1362-hcd",
- .id = 0,
- .dev = {
- .platform_data = &isp1362_priv,
- },
- .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
- .resource = isp1362_hcd_resources,
-};
-#endif
-
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
@@ -841,10 +799,6 @@ static struct platform_device *cmbf527_devices[] __initdata = {
&sl811_hcd_device,
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
- &isp1362_hcd_device,
-#endif
-
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
&bfin_isp1760_device,
#endif
diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c
index f09665f74ba0..5294fdd20732 100644
--- a/arch/blackfin/mach-bf527/boards/ezkit.c
+++ b/arch/blackfin/mach-bf527/boards/ezkit.c
@@ -13,9 +13,6 @@
#include <linux/mtd/physmap.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-#include <linux/usb/isp1362.h>
-#endif
#include <linux/i2c.h>
#include <linux/irq.h>
#include <linux/interrupt.h>
@@ -63,7 +60,7 @@ static struct isp1760_platform_data isp1760_priv = {
};
static struct platform_device bfin_isp1760_device = {
- .name = "isp1760-hcd",
+ .name = "isp1760",
.id = 0,
.dev = {
.platform_data = &isp1760_priv,
@@ -373,45 +370,6 @@ static struct platform_device sl811_hcd_device = {
};
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
-static struct resource isp1362_hcd_resources[] = {
- {
- .start = 0x20360000,
- .end = 0x20360000,
- .flags = IORESOURCE_MEM,
- }, {
- .start = 0x20360004,
- .end = 0x20360004,
- .flags = IORESOURCE_MEM,
- }, {
- .start = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
- .end = CONFIG_USB_ISP1362_BFIN_GPIO_IRQ,
- .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL,
- },
-};
-
-static struct isp1362_platform_data isp1362_priv = {
- .sel15Kres = 1,
- .clknotstop = 0,
- .oc_enable = 0,
- .int_act_high = 0,
- .int_edge_triggered = 0,
- .remote_wakeup_connected = 0,
- .no_power_switching = 1,
- .power_switching_mode = 0,
-};
-
-static struct platform_device isp1362_hcd_device = {
- .name = "isp1362-hcd",
- .id = 0,
- .dev = {
- .platform_data = &isp1362_priv,
- },
- .num_resources = ARRAY_SIZE(isp1362_hcd_resources),
- .resource = isp1362_hcd_resources,
-};
-#endif
-
#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE)
static struct platform_device bfin_mii_bus = {
.name = "bfin_mii_bus",
@@ -688,12 +646,6 @@ static struct platform_device bfin_spi0_device = {
};
#endif /* spi master and devices */
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
-static struct platform_device bfin_fb_device = {
- .name = "bf537-lq035",
-};
-#endif
-
#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE)
static struct resource bfin_uart_resources[] = {
#ifdef CONFIG_SERIAL_BFIN_UART0
@@ -850,7 +802,7 @@ static struct platform_device bfin_device_gpiokeys = {
};
#endif
-#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
#include <linux/input.h>
#include <asm/bfin_rotary.h>
@@ -924,10 +876,6 @@ static struct platform_device *stamp_devices[] __initdata = {
&sl811_hcd_device,
#endif
-#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE)
- &isp1362_hcd_device,
-#endif
-
#if defined(CONFIG_USB_ISP1760_HCD) || defined(CONFIG_USB_ISP1760_HCD_MODULE)
&bfin_isp1760_device,
#endif
@@ -957,10 +905,6 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_spi0_device,
#endif
-#if defined(CONFIG_FB_BF537_LQ035) || defined(CONFIG_FB_BF537_LQ035_MODULE)
- &bfin_fb_device,
-#endif
-
#if defined(CONFIG_FB_BFIN_T350MCQB) || defined(CONFIG_FB_BFIN_T350MCQB_MODULE)
&bf52x_t350mcqb_device,
#endif
@@ -991,7 +935,7 @@ static struct platform_device *stamp_devices[] __initdata = {
&bfin_device_gpiokeys,
#endif
-#if defined(CONFIG_JOYSTICK_BFIN_ROTARY) || defined(CONFIG_JOYSTICK_BFIN_ROTARY_MODULE)
+#if defined(CONFIG_INPUT_BFIN_ROTARY) || defined(CONFIG_INPUT_BFIN_ROTARY_MODULE)
&bfin_rotary_device,
#endif
diff --git a/arch/blackfin/mach-bf527/include/mach/blackfin.h b/arch/blackfin/mach-bf527/include/mach/blackfin.h
index e7d6034f268f..f714c5de3073 100644
--- a/arch/blackfin/mach-bf527/include/mach/blackfin.h
+++ b/arch/blackfin/mach-bf527/include/mach/blackfin.h
@@ -46,10 +46,4 @@
#define OFFSET_SCR 0x1C /* SCR Scratch Register */
#define OFFSET_GCTL 0x24 /* Global Control Register */
-/* PLL_DIV Masks */
-#define CCLK_DIV1 CSEL_DIV1 /* CCLK = VCO / 1 */
-#define CCLK_DIV2 CSEL_DIV2 /* CCLK = VCO / 2 */
-#define CCLK_DIV4 CSEL_DIV4 /* CCLK = VCO / 4 */
-#define CCLK_DIV8 CSEL_DIV8 /* CCLK = VCO / 8 */
-
#endif
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF525.h b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
index dc3119e9f663..d7e2751c6bcc 100644
--- a/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF525.h
@@ -10,15 +10,8 @@
/* include all Core registers and bit definitions */
#include "defBF525.h"
-/* include core specific register pointer definitions */
-#include <asm/cdef_LPBlackfin.h>
-
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */
-
-/* include cdefBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */
-#include "cdefBF52x_base.h"
-
-/* The following are the #defines needed by ADSP-BF525 that are not in the common header */
+/* BF525 is BF522 + USB */
+#include "cdefBF522.h"
/* USB Control Registers */
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF527.h b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
index d6579449ee46..c7ba544d50b6 100644
--- a/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF527.h
@@ -10,15 +10,8 @@
/* include all Core registers and bit definitions */
#include "defBF527.h"
-/* include core specific register pointer definitions */
-#include <asm/cdef_LPBlackfin.h>
-
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */
-
-/* include cdefBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */
-#include "cdefBF52x_base.h"
-
-/* The following are the #defines needed by ADSP-BF527 that are not in the common header */
+/* BF527 is BF525 + EMAC */
+#include "cdefBF525.h"
/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */
@@ -185,417 +178,4 @@
#define bfin_read_EMAC_TXC_ABORT() bfin_read32(EMAC_TXC_ABORT)
#define bfin_write_EMAC_TXC_ABORT(val) bfin_write32(EMAC_TXC_ABORT, val)
-/* USB Control Registers */
-
-#define bfin_read_USB_FADDR() bfin_read16(USB_FADDR)
-#define bfin_write_USB_FADDR(val) bfin_write16(USB_FADDR, val)
-#define bfin_read_USB_POWER() bfin_read16(USB_POWER)
-#define bfin_write_USB_POWER(val) bfin_write16(USB_POWER, val)
-#define bfin_read_USB_INTRTX() bfin_read16(USB_INTRTX)
-#define bfin_write_USB_INTRTX(val) bfin_write16(USB_INTRTX, val)
-#define bfin_read_USB_INTRRX() bfin_read16(USB_INTRRX)
-#define bfin_write_USB_INTRRX(val) bfin_write16(USB_INTRRX, val)
-#define bfin_read_USB_INTRTXE() bfin_read16(USB_INTRTXE)
-#define bfin_write_USB_INTRTXE(val) bfin_write16(USB_INTRTXE, val)
-#define bfin_read_USB_INTRRXE() bfin_read16(USB_INTRRXE)
-#define bfin_write_USB_INTRRXE(val) bfin_write16(USB_INTRRXE, val)
-#define bfin_read_USB_INTRUSB() bfin_read16(USB_INTRUSB)
-#define bfin_write_USB_INTRUSB(val) bfin_write16(USB_INTRUSB, val)
-#define bfin_read_USB_INTRUSBE() bfin_read16(USB_INTRUSBE)
-#define bfin_write_USB_INTRUSBE(val) bfin_write16(USB_INTRUSBE, val)
-#define bfin_read_USB_FRAME() bfin_read16(USB_FRAME)
-#define bfin_write_USB_FRAME(val) bfin_write16(USB_FRAME, val)
-#define bfin_read_USB_INDEX() bfin_read16(USB_INDEX)
-#define bfin_write_USB_INDEX(val) bfin_write16(USB_INDEX, val)
-#define bfin_read_USB_TESTMODE() bfin_read16(USB_TESTMODE)
-#define bfin_write_USB_TESTMODE(val) bfin_write16(USB_TESTMODE, val)
-#define bfin_read_USB_GLOBINTR() bfin_read16(USB_GLOBINTR)
-#define bfin_write_USB_GLOBINTR(val) bfin_write16(USB_GLOBINTR, val)
-#define bfin_read_USB_GLOBAL_CTL() bfin_read16(USB_GLOBAL_CTL)
-#define bfin_write_USB_GLOBAL_CTL(val) bfin_write16(USB_GLOBAL_CTL, val)
-
-/* USB Packet Control Registers */
-
-#define bfin_read_USB_TX_MAX_PACKET() bfin_read16(USB_TX_MAX_PACKET)
-#define bfin_write_USB_TX_MAX_PACKET(val) bfin_write16(USB_TX_MAX_PACKET, val)
-#define bfin_read_USB_CSR0() bfin_read16(USB_CSR0)
-#define bfin_write_USB_CSR0(val) bfin_write16(USB_CSR0, val)
-#define bfin_read_USB_TXCSR() bfin_read16(USB_TXCSR)
-#define bfin_write_USB_TXCSR(val) bfin_write16(USB_TXCSR, val)
-#define bfin_read_USB_RX_MAX_PACKET() bfin_read16(USB_RX_MAX_PACKET)
-#define bfin_write_USB_RX_MAX_PACKET(val) bfin_write16(USB_RX_MAX_PACKET, val)
-#define bfin_read_USB_RXCSR() bfin_read16(USB_RXCSR)
-#define bfin_write_USB_RXCSR(val) bfin_write16(USB_RXCSR, val)
-#define bfin_read_USB_COUNT0() bfin_read16(USB_COUNT0)
-#define bfin_write_USB_COUNT0(val) bfin_write16(USB_COUNT0, val)
-#define bfin_read_USB_RXCOUNT() bfin_read16(USB_RXCOUNT)
-#define bfin_write_USB_RXCOUNT(val) bfin_write16(USB_RXCOUNT, val)
-#define bfin_read_USB_TXTYPE() bfin_read16(USB_TXTYPE)
-#define bfin_write_USB_TXTYPE(val) bfin_write16(USB_TXTYPE, val)
-#define bfin_read_USB_NAKLIMIT0() bfin_read16(USB_NAKLIMIT0)
-#define bfin_write_USB_NAKLIMIT0(val) bfin_write16(USB_NAKLIMIT0, val)
-#define bfin_read_USB_TXINTERVAL() bfin_read16(USB_TXINTERVAL)
-#define bfin_write_USB_TXINTERVAL(val) bfin_write16(USB_TXINTERVAL, val)
-#define bfin_read_USB_RXTYPE() bfin_read16(USB_RXTYPE)
-#define bfin_write_USB_RXTYPE(val) bfin_write16(USB_RXTYPE, val)
-#define bfin_read_USB_RXINTERVAL() bfin_read16(USB_RXINTERVAL)
-#define bfin_write_USB_RXINTERVAL(val) bfin_write16(USB_RXINTERVAL, val)
-#define bfin_read_USB_TXCOUNT() bfin_read16(USB_TXCOUNT)
-#define bfin_write_USB_TXCOUNT(val) bfin_write16(USB_TXCOUNT, val)
-
-/* USB Endpoint FIFO Registers */
-
-#define bfin_read_USB_EP0_FIFO() bfin_read16(USB_EP0_FIFO)
-#define bfin_write_USB_EP0_FIFO(val) bfin_write16(USB_EP0_FIFO, val)
-#define bfin_read_USB_EP1_FIFO() bfin_read16(USB_EP1_FIFO)
-#define bfin_write_USB_EP1_FIFO(val) bfin_write16(USB_EP1_FIFO, val)
-#define bfin_read_USB_EP2_FIFO() bfin_read16(USB_EP2_FIFO)
-#define bfin_write_USB_EP2_FIFO(val) bfin_write16(USB_EP2_FIFO, val)
-#define bfin_read_USB_EP3_FIFO() bfin_read16(USB_EP3_FIFO)
-#define bfin_write_USB_EP3_FIFO(val) bfin_write16(USB_EP3_FIFO, val)
-#define bfin_read_USB_EP4_FIFO() bfin_read16(USB_EP4_FIFO)
-#define bfin_write_USB_EP4_FIFO(val) bfin_write16(USB_EP4_FIFO, val)
-#define bfin_read_USB_EP5_FIFO() bfin_read16(USB_EP5_FIFO)
-#define bfin_write_USB_EP5_FIFO(val) bfin_write16(USB_EP5_FIFO, val)
-#define bfin_read_USB_EP6_FIFO() bfin_read16(USB_EP6_FIFO)
-#define bfin_write_USB_EP6_FIFO(val) bfin_write16(USB_EP6_FIFO, val)
-#define bfin_read_USB_EP7_FIFO() bfin_read16(USB_EP7_FIFO)
-#define bfin_write_USB_EP7_FIFO(val) bfin_write16(USB_EP7_FIFO, val)
-
-/* USB OTG Control Registers */
-
-#define bfin_read_USB_OTG_DEV_CTL() bfin_read16(USB_OTG_DEV_CTL)
-#define bfin_write_USB_OTG_DEV_CTL(val) bfin_write16(USB_OTG_DEV_CTL, val)
-#define bfin_read_USB_OTG_VBUS_IRQ() bfin_read16(USB_OTG_VBUS_IRQ)
-#define bfin_write_USB_OTG_VBUS_IRQ(val) bfin_write16(USB_OTG_VBUS_IRQ, val)
-#define bfin_read_USB_OTG_VBUS_MASK() bfin_read16(USB_OTG_VBUS_MASK)
-#define bfin_write_USB_OTG_VBUS_MASK(val) bfin_write16(USB_OTG_VBUS_MASK, val)
-
-/* USB Phy Control Registers */
-
-#define bfin_read_USB_LINKINFO() bfin_read16(USB_LINKINFO)
-#define bfin_write_USB_LINKINFO(val) bfin_write16(USB_LINKINFO, val)
-#define bfin_read_USB_VPLEN() bfin_read16(USB_VPLEN)
-#define bfin_write_USB_VPLEN(val) bfin_write16(USB_VPLEN, val)
-#define bfin_read_USB_HS_EOF1() bfin_read16(USB_HS_EOF1)
-#define bfin_write_USB_HS_EOF1(val) bfin_write16(USB_HS_EOF1, val)
-#define bfin_read_USB_FS_EOF1() bfin_read16(USB_FS_EOF1)
-#define bfin_write_USB_FS_EOF1(val) bfin_write16(USB_FS_EOF1, val)
-#define bfin_read_USB_LS_EOF1() bfin_read16(USB_LS_EOF1)
-#define bfin_write_USB_LS_EOF1(val) bfin_write16(USB_LS_EOF1, val)
-
-/* (APHY_CNTRL is for ADI usage only) */
-
-#define bfin_read_USB_APHY_CNTRL() bfin_read16(USB_APHY_CNTRL)
-#define bfin_write_USB_APHY_CNTRL(val) bfin_write16(USB_APHY_CNTRL, val)
-
-/* (APHY_CALIB is for ADI usage only) */
-
-#define bfin_read_USB_APHY_CALIB() bfin_read16(USB_APHY_CALIB)
-#define bfin_write_USB_APHY_CALIB(val) bfin_write16(USB_APHY_CALIB, val)
-
-#define bfin_read_USB_APHY_CNTRL2() bfin_read16(USB_APHY_CNTRL2)
-#define bfin_write_USB_APHY_CNTRL2(val) bfin_write16(USB_APHY_CNTRL2, val)
-
-/* (PHY_TEST is for ADI usage only) */
-
-#define bfin_read_USB_PHY_TEST() bfin_read16(USB_PHY_TEST)
-#define bfin_write_USB_PHY_TEST(val) bfin_write16(USB_PHY_TEST, val)
-
-#define bfin_read_USB_PLLOSC_CTRL() bfin_read16(USB_PLLOSC_CTRL)
-#define bfin_write_USB_PLLOSC_CTRL(val) bfin_write16(USB_PLLOSC_CTRL, val)
-#define bfin_read_USB_SRP_CLKDIV() bfin_read16(USB_SRP_CLKDIV)
-#define bfin_write_USB_SRP_CLKDIV(val) bfin_write16(USB_SRP_CLKDIV, val)
-
-/* USB Endpoint 0 Control Registers */
-
-#define bfin_read_USB_EP_NI0_TXMAXP() bfin_read16(USB_EP_NI0_TXMAXP)
-#define bfin_write_USB_EP_NI0_TXMAXP(val) bfin_write16(USB_EP_NI0_TXMAXP, val)
-#define bfin_read_USB_EP_NI0_TXCSR() bfin_read16(USB_EP_NI0_TXCSR)
-#define bfin_write_USB_EP_NI0_TXCSR(val) bfin_write16(USB_EP_NI0_TXCSR, val)
-#define bfin_read_USB_EP_NI0_RXMAXP() bfin_read16(USB_EP_NI0_RXMAXP)
-#define bfin_write_USB_EP_NI0_RXMAXP(val) bfin_write16(USB_EP_NI0_RXMAXP, val)
-#define bfin_read_USB_EP_NI0_RXCSR() bfin_read16(USB_EP_NI0_RXCSR)
-#define bfin_write_USB_EP_NI0_RXCSR(val) bfin_write16(USB_EP_NI0_RXCSR, val)
-#define bfin_read_USB_EP_NI0_RXCOUNT() bfin_read16(USB_EP_NI0_RXCOUNT)
-#define bfin_write_USB_EP_NI0_RXCOUNT(val) bfin_write16(USB_EP_NI0_RXCOUNT, val)
-#define bfin_read_USB_EP_NI0_TXTYPE() bfin_read16(USB_EP_NI0_TXTYPE)
-#define bfin_write_USB_EP_NI0_TXTYPE(val) bfin_write16(USB_EP_NI0_TXTYPE, val)
-#define bfin_read_USB_EP_NI0_TXINTERVAL() bfin_read16(USB_EP_NI0_TXINTERVAL)
-#define bfin_write_USB_EP_NI0_TXINTERVAL(val) bfin_write16(USB_EP_NI0_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI0_RXTYPE() bfin_read16(USB_EP_NI0_RXTYPE)
-#define bfin_write_USB_EP_NI0_RXTYPE(val) bfin_write16(USB_EP_NI0_RXTYPE, val)
-#define bfin_read_USB_EP_NI0_RXINTERVAL() bfin_read16(USB_EP_NI0_RXINTERVAL)
-#define bfin_write_USB_EP_NI0_RXINTERVAL(val) bfin_write16(USB_EP_NI0_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI0_TXCOUNT() bfin_read16(USB_EP_NI0_TXCOUNT)
-#define bfin_write_USB_EP_NI0_TXCOUNT(val) bfin_write16(USB_EP_NI0_TXCOUNT, val)
-
-/* USB Endpoint 1 Control Registers */
-
-#define bfin_read_USB_EP_NI1_TXMAXP() bfin_read16(USB_EP_NI1_TXMAXP)
-#define bfin_write_USB_EP_NI1_TXMAXP(val) bfin_write16(USB_EP_NI1_TXMAXP, val)
-#define bfin_read_USB_EP_NI1_TXCSR() bfin_read16(USB_EP_NI1_TXCSR)
-#define bfin_write_USB_EP_NI1_TXCSR(val) bfin_write16(USB_EP_NI1_TXCSR, val)
-#define bfin_read_USB_EP_NI1_RXMAXP() bfin_read16(USB_EP_NI1_RXMAXP)
-#define bfin_write_USB_EP_NI1_RXMAXP(val) bfin_write16(USB_EP_NI1_RXMAXP, val)
-#define bfin_read_USB_EP_NI1_RXCSR() bfin_read16(USB_EP_NI1_RXCSR)
-#define bfin_write_USB_EP_NI1_RXCSR(val) bfin_write16(USB_EP_NI1_RXCSR, val)
-#define bfin_read_USB_EP_NI1_RXCOUNT() bfin_read16(USB_EP_NI1_RXCOUNT)
-#define bfin_write_USB_EP_NI1_RXCOUNT(val) bfin_write16(USB_EP_NI1_RXCOUNT, val)
-#define bfin_read_USB_EP_NI1_TXTYPE() bfin_read16(USB_EP_NI1_TXTYPE)
-#define bfin_write_USB_EP_NI1_TXTYPE(val) bfin_write16(USB_EP_NI1_TXTYPE, val)
-#define bfin_read_USB_EP_NI1_TXINTERVAL() bfin_read16(USB_EP_NI1_TXINTERVAL)
-#define bfin_write_USB_EP_NI1_TXINTERVAL(val) bfin_write16(USB_EP_NI1_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI1_RXTYPE() bfin_read16(USB_EP_NI1_RXTYPE)
-#define bfin_write_USB_EP_NI1_RXTYPE(val) bfin_write16(USB_EP_NI1_RXTYPE, val)
-#define bfin_read_USB_EP_NI1_RXINTERVAL() bfin_read16(USB_EP_NI1_RXINTERVAL)
-#define bfin_write_USB_EP_NI1_RXINTERVAL(val) bfin_write16(USB_EP_NI1_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI1_TXCOUNT() bfin_read16(USB_EP_NI1_TXCOUNT)
-#define bfin_write_USB_EP_NI1_TXCOUNT(val) bfin_write16(USB_EP_NI1_TXCOUNT, val)
-
-/* USB Endpoint 2 Control Registers */
-
-#define bfin_read_USB_EP_NI2_TXMAXP() bfin_read16(USB_EP_NI2_TXMAXP)
-#define bfin_write_USB_EP_NI2_TXMAXP(val) bfin_write16(USB_EP_NI2_TXMAXP, val)
-#define bfin_read_USB_EP_NI2_TXCSR() bfin_read16(USB_EP_NI2_TXCSR)
-#define bfin_write_USB_EP_NI2_TXCSR(val) bfin_write16(USB_EP_NI2_TXCSR, val)
-#define bfin_read_USB_EP_NI2_RXMAXP() bfin_read16(USB_EP_NI2_RXMAXP)
-#define bfin_write_USB_EP_NI2_RXMAXP(val) bfin_write16(USB_EP_NI2_RXMAXP, val)
-#define bfin_read_USB_EP_NI2_RXCSR() bfin_read16(USB_EP_NI2_RXCSR)
-#define bfin_write_USB_EP_NI2_RXCSR(val) bfin_write16(USB_EP_NI2_RXCSR, val)
-#define bfin_read_USB_EP_NI2_RXCOUNT() bfin_read16(USB_EP_NI2_RXCOUNT)
-#define bfin_write_USB_EP_NI2_RXCOUNT(val) bfin_write16(USB_EP_NI2_RXCOUNT, val)
-#define bfin_read_USB_EP_NI2_TXTYPE() bfin_read16(USB_EP_NI2_TXTYPE)
-#define bfin_write_USB_EP_NI2_TXTYPE(val) bfin_write16(USB_EP_NI2_TXTYPE, val)
-#define bfin_read_USB_EP_NI2_TXINTERVAL() bfin_read16(USB_EP_NI2_TXINTERVAL)
-#define bfin_write_USB_EP_NI2_TXINTERVAL(val) bfin_write16(USB_EP_NI2_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI2_RXTYPE() bfin_read16(USB_EP_NI2_RXTYPE)
-#define bfin_write_USB_EP_NI2_RXTYPE(val) bfin_write16(USB_EP_NI2_RXTYPE, val)
-#define bfin_read_USB_EP_NI2_RXINTERVAL() bfin_read16(USB_EP_NI2_RXINTERVAL)
-#define bfin_write_USB_EP_NI2_RXINTERVAL(val) bfin_write16(USB_EP_NI2_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI2_TXCOUNT() bfin_read16(USB_EP_NI2_TXCOUNT)
-#define bfin_write_USB_EP_NI2_TXCOUNT(val) bfin_write16(USB_EP_NI2_TXCOUNT, val)
-
-/* USB Endpoint 3 Control Registers */
-
-#define bfin_read_USB_EP_NI3_TXMAXP() bfin_read16(USB_EP_NI3_TXMAXP)
-#define bfin_write_USB_EP_NI3_TXMAXP(val) bfin_write16(USB_EP_NI3_TXMAXP, val)
-#define bfin_read_USB_EP_NI3_TXCSR() bfin_read16(USB_EP_NI3_TXCSR)
-#define bfin_write_USB_EP_NI3_TXCSR(val) bfin_write16(USB_EP_NI3_TXCSR, val)
-#define bfin_read_USB_EP_NI3_RXMAXP() bfin_read16(USB_EP_NI3_RXMAXP)
-#define bfin_write_USB_EP_NI3_RXMAXP(val) bfin_write16(USB_EP_NI3_RXMAXP, val)
-#define bfin_read_USB_EP_NI3_RXCSR() bfin_read16(USB_EP_NI3_RXCSR)
-#define bfin_write_USB_EP_NI3_RXCSR(val) bfin_write16(USB_EP_NI3_RXCSR, val)
-#define bfin_read_USB_EP_NI3_RXCOUNT() bfin_read16(USB_EP_NI3_RXCOUNT)
-#define bfin_write_USB_EP_NI3_RXCOUNT(val) bfin_write16(USB_EP_NI3_RXCOUNT, val)
-#define bfin_read_USB_EP_NI3_TXTYPE() bfin_read16(USB_EP_NI3_TXTYPE)
-#define bfin_write_USB_EP_NI3_TXTYPE(val) bfin_write16(USB_EP_NI3_TXTYPE, val)
-#define bfin_read_USB_EP_NI3_TXINTERVAL() bfin_read16(USB_EP_NI3_TXINTERVAL)
-#define bfin_write_USB_EP_NI3_TXINTERVAL(val) bfin_write16(USB_EP_NI3_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI3_RXTYPE() bfin_read16(USB_EP_NI3_RXTYPE)
-#define bfin_write_USB_EP_NI3_RXTYPE(val) bfin_write16(USB_EP_NI3_RXTYPE, val)
-#define bfin_read_USB_EP_NI3_RXINTERVAL() bfin_read16(USB_EP_NI3_RXINTERVAL)
-#define bfin_write_USB_EP_NI3_RXINTERVAL(val) bfin_write16(USB_EP_NI3_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI3_TXCOUNT() bfin_read16(USB_EP_NI3_TXCOUNT)
-#define bfin_write_USB_EP_NI3_TXCOUNT(val) bfin_write16(USB_EP_NI3_TXCOUNT, val)
-
-/* USB Endpoint 4 Control Registers */
-
-#define bfin_read_USB_EP_NI4_TXMAXP() bfin_read16(USB_EP_NI4_TXMAXP)
-#define bfin_write_USB_EP_NI4_TXMAXP(val) bfin_write16(USB_EP_NI4_TXMAXP, val)
-#define bfin_read_USB_EP_NI4_TXCSR() bfin_read16(USB_EP_NI4_TXCSR)
-#define bfin_write_USB_EP_NI4_TXCSR(val) bfin_write16(USB_EP_NI4_TXCSR, val)
-#define bfin_read_USB_EP_NI4_RXMAXP() bfin_read16(USB_EP_NI4_RXMAXP)
-#define bfin_write_USB_EP_NI4_RXMAXP(val) bfin_write16(USB_EP_NI4_RXMAXP, val)
-#define bfin_read_USB_EP_NI4_RXCSR() bfin_read16(USB_EP_NI4_RXCSR)
-#define bfin_write_USB_EP_NI4_RXCSR(val) bfin_write16(USB_EP_NI4_RXCSR, val)
-#define bfin_read_USB_EP_NI4_RXCOUNT() bfin_read16(USB_EP_NI4_RXCOUNT)
-#define bfin_write_USB_EP_NI4_RXCOUNT(val) bfin_write16(USB_EP_NI4_RXCOUNT, val)
-#define bfin_read_USB_EP_NI4_TXTYPE() bfin_read16(USB_EP_NI4_TXTYPE)
-#define bfin_write_USB_EP_NI4_TXTYPE(val) bfin_write16(USB_EP_NI4_TXTYPE, val)
-#define bfin_read_USB_EP_NI4_TXINTERVAL() bfin_read16(USB_EP_NI4_TXINTERVAL)
-#define bfin_write_USB_EP_NI4_TXINTERVAL(val) bfin_write16(USB_EP_NI4_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI4_RXTYPE() bfin_read16(USB_EP_NI4_RXTYPE)
-#define bfin_write_USB_EP_NI4_RXTYPE(val) bfin_write16(USB_EP_NI4_RXTYPE, val)
-#define bfin_read_USB_EP_NI4_RXINTERVAL() bfin_read16(USB_EP_NI4_RXINTERVAL)
-#define bfin_write_USB_EP_NI4_RXINTERVAL(val) bfin_write16(USB_EP_NI4_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI4_TXCOUNT() bfin_read16(USB_EP_NI4_TXCOUNT)
-#define bfin_write_USB_EP_NI4_TXCOUNT(val) bfin_write16(USB_EP_NI4_TXCOUNT, val)
-
-/* USB Endpoint 5 Control Registers */
-
-#define bfin_read_USB_EP_NI5_TXMAXP() bfin_read16(USB_EP_NI5_TXMAXP)
-#define bfin_write_USB_EP_NI5_TXMAXP(val) bfin_write16(USB_EP_NI5_TXMAXP, val)
-#define bfin_read_USB_EP_NI5_TXCSR() bfin_read16(USB_EP_NI5_TXCSR)
-#define bfin_write_USB_EP_NI5_TXCSR(val) bfin_write16(USB_EP_NI5_TXCSR, val)
-#define bfin_read_USB_EP_NI5_RXMAXP() bfin_read16(USB_EP_NI5_RXMAXP)
-#define bfin_write_USB_EP_NI5_RXMAXP(val) bfin_write16(USB_EP_NI5_RXMAXP, val)
-#define bfin_read_USB_EP_NI5_RXCSR() bfin_read16(USB_EP_NI5_RXCSR)
-#define bfin_write_USB_EP_NI5_RXCSR(val) bfin_write16(USB_EP_NI5_RXCSR, val)
-#define bfin_read_USB_EP_NI5_RXCOUNT() bfin_read16(USB_EP_NI5_RXCOUNT)
-#define bfin_write_USB_EP_NI5_RXCOUNT(val) bfin_write16(USB_EP_NI5_RXCOUNT, val)
-#define bfin_read_USB_EP_NI5_TXTYPE() bfin_read16(USB_EP_NI5_TXTYPE)
-#define bfin_write_USB_EP_NI5_TXTYPE(val) bfin_write16(USB_EP_NI5_TXTYPE, val)
-#define bfin_read_USB_EP_NI5_TXINTERVAL() bfin_read16(USB_EP_NI5_TXINTERVAL)
-#define bfin_write_USB_EP_NI5_TXINTERVAL(val) bfin_write16(USB_EP_NI5_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI5_RXTYPE() bfin_read16(USB_EP_NI5_RXTYPE)
-#define bfin_write_USB_EP_NI5_RXTYPE(val) bfin_write16(USB_EP_NI5_RXTYPE, val)
-#define bfin_read_USB_EP_NI5_RXINTERVAL() bfin_read16(USB_EP_NI5_RXINTERVAL)
-#define bfin_write_USB_EP_NI5_RXINTERVAL(val) bfin_write16(USB_EP_NI5_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI5_TXCOUNT() bfin_read16(USB_EP_NI5_TXCOUNT)
-#define bfin_write_USB_EP_NI5_TXCOUNT(val) bfin_write16(USB_EP_NI5_TXCOUNT, val)
-
-/* USB Endpoint 6 Control Registers */
-
-#define bfin_read_USB_EP_NI6_TXMAXP() bfin_read16(USB_EP_NI6_TXMAXP)
-#define bfin_write_USB_EP_NI6_TXMAXP(val) bfin_write16(USB_EP_NI6_TXMAXP, val)
-#define bfin_read_USB_EP_NI6_TXCSR() bfin_read16(USB_EP_NI6_TXCSR)
-#define bfin_write_USB_EP_NI6_TXCSR(val) bfin_write16(USB_EP_NI6_TXCSR, val)
-#define bfin_read_USB_EP_NI6_RXMAXP() bfin_read16(USB_EP_NI6_RXMAXP)
-#define bfin_write_USB_EP_NI6_RXMAXP(val) bfin_write16(USB_EP_NI6_RXMAXP, val)
-#define bfin_read_USB_EP_NI6_RXCSR() bfin_read16(USB_EP_NI6_RXCSR)
-#define bfin_write_USB_EP_NI6_RXCSR(val) bfin_write16(USB_EP_NI6_RXCSR, val)
-#define bfin_read_USB_EP_NI6_RXCOUNT() bfin_read16(USB_EP_NI6_RXCOUNT)
-#define bfin_write_USB_EP_NI6_RXCOUNT(val) bfin_write16(USB_EP_NI6_RXCOUNT, val)
-#define bfin_read_USB_EP_NI6_TXTYPE() bfin_read16(USB_EP_NI6_TXTYPE)
-#define bfin_write_USB_EP_NI6_TXTYPE(val) bfin_write16(USB_EP_NI6_TXTYPE, val)
-#define bfin_read_USB_EP_NI6_TXINTERVAL() bfin_read16(USB_EP_NI6_TXINTERVAL)
-#define bfin_write_USB_EP_NI6_TXINTERVAL(val) bfin_write16(USB_EP_NI6_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI6_RXTYPE() bfin_read16(USB_EP_NI6_RXTYPE)
-#define bfin_write_USB_EP_NI6_RXTYPE(val) bfin_write16(USB_EP_NI6_RXTYPE, val)
-#define bfin_read_USB_EP_NI6_RXINTERVAL() bfin_read16(USB_EP_NI6_RXINTERVAL)
-#define bfin_write_USB_EP_NI6_RXINTERVAL(val) bfin_write16(USB_EP_NI6_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI6_TXCOUNT() bfin_read16(USB_EP_NI6_TXCOUNT)
-#define bfin_write_USB_EP_NI6_TXCOUNT(val) bfin_write16(USB_EP_NI6_TXCOUNT, val)
-
-/* USB Endpoint 7 Control Registers */
-
-#define bfin_read_USB_EP_NI7_TXMAXP() bfin_read16(USB_EP_NI7_TXMAXP)
-#define bfin_write_USB_EP_NI7_TXMAXP(val) bfin_write16(USB_EP_NI7_TXMAXP, val)
-#define bfin_read_USB_EP_NI7_TXCSR() bfin_read16(USB_EP_NI7_TXCSR)
-#define bfin_write_USB_EP_NI7_TXCSR(val) bfin_write16(USB_EP_NI7_TXCSR, val)
-#define bfin_read_USB_EP_NI7_RXMAXP() bfin_read16(USB_EP_NI7_RXMAXP)
-#define bfin_write_USB_EP_NI7_RXMAXP(val) bfin_write16(USB_EP_NI7_RXMAXP, val)
-#define bfin_read_USB_EP_NI7_RXCSR() bfin_read16(USB_EP_NI7_RXCSR)
-#define bfin_write_USB_EP_NI7_RXCSR(val) bfin_write16(USB_EP_NI7_RXCSR, val)
-#define bfin_read_USB_EP_NI7_RXCOUNT() bfin_read16(USB_EP_NI7_RXCOUNT)
-#define bfin_write_USB_EP_NI7_RXCOUNT(val) bfin_write16(USB_EP_NI7_RXCOUNT, val)
-#define bfin_read_USB_EP_NI7_TXTYPE() bfin_read16(USB_EP_NI7_TXTYPE)
-#define bfin_write_USB_EP_NI7_TXTYPE(val) bfin_write16(USB_EP_NI7_TXTYPE, val)
-#define bfin_read_USB_EP_NI7_TXINTERVAL() bfin_read16(USB_EP_NI7_TXINTERVAL)
-#define bfin_write_USB_EP_NI7_TXINTERVAL(val) bfin_write16(USB_EP_NI7_TXINTERVAL, val)
-#define bfin_read_USB_EP_NI7_RXTYPE() bfin_read16(USB_EP_NI7_RXTYPE)
-#define bfin_write_USB_EP_NI7_RXTYPE(val) bfin_write16(USB_EP_NI7_RXTYPE, val)
-#define bfin_read_USB_EP_NI7_RXINTERVAL() bfin_read16(USB_EP_NI7_RXINTERVAL)
-#define bfin_write_USB_EP_NI7_RXINTERVAL(val) bfin_write16(USB_EP_NI7_RXINTERVAL, val)
-#define bfin_read_USB_EP_NI7_TXCOUNT() bfin_read16(USB_EP_NI7_TXCOUNT)
-#define bfin_write_USB_EP_NI7_TXCOUNT(val) bfin_write16(USB_EP_NI7_TXCOUNT, val)
-
-#define bfin_read_USB_DMA_INTERRUPT() bfin_read16(USB_DMA_INTERRUPT)
-#define bfin_write_USB_DMA_INTERRUPT(val) bfin_write16(USB_DMA_INTERRUPT, val)
-
-/* USB Channel 0 Config Registers */
-
-#define bfin_read_USB_DMA0CONTROL() bfin_read16(USB_DMA0CONTROL)
-#define bfin_write_USB_DMA0CONTROL(val) bfin_write16(USB_DMA0CONTROL, val)
-#define bfin_read_USB_DMA0ADDRLOW() bfin_read16(USB_DMA0ADDRLOW)
-#define bfin_write_USB_DMA0ADDRLOW(val) bfin_write16(USB_DMA0ADDRLOW, val)
-#define bfin_read_USB_DMA0ADDRHIGH() bfin_read16(USB_DMA0ADDRHIGH)
-#define bfin_write_USB_DMA0ADDRHIGH(val) bfin_write16(USB_DMA0ADDRHIGH, val)
-#define bfin_read_USB_DMA0COUNTLOW() bfin_read16(USB_DMA0COUNTLOW)
-#define bfin_write_USB_DMA0COUNTLOW(val) bfin_write16(USB_DMA0COUNTLOW, val)
-#define bfin_read_USB_DMA0COUNTHIGH() bfin_read16(USB_DMA0COUNTHIGH)
-#define bfin_write_USB_DMA0COUNTHIGH(val) bfin_write16(USB_DMA0COUNTHIGH, val)
-
-/* USB Channel 1 Config Registers */
-
-#define bfin_read_USB_DMA1CONTROL() bfin_read16(USB_DMA1CONTROL)
-#define bfin_write_USB_DMA1CONTROL(val) bfin_write16(USB_DMA1CONTROL, val)
-#define bfin_read_USB_DMA1ADDRLOW() bfin_read16(USB_DMA1ADDRLOW)
-#define bfin_write_USB_DMA1ADDRLOW(val) bfin_write16(USB_DMA1ADDRLOW, val)
-#define bfin_read_USB_DMA1ADDRHIGH() bfin_read16(USB_DMA1ADDRHIGH)
-#define bfin_write_USB_DMA1ADDRHIGH(val) bfin_write16(USB_DMA1ADDRHIGH, val)
-#define bfin_read_USB_DMA1COUNTLOW() bfin_read16(USB_DMA1COUNTLOW)
-#define bfin_write_USB_DMA1COUNTLOW(val) bfin_write16(USB_DMA1COUNTLOW, val)
-#define bfin_read_USB_DMA1COUNTHIGH() bfin_read16(USB_DMA1COUNTHIGH)
-#define bfin_write_USB_DMA1COUNTHIGH(val) bfin_write16(USB_DMA1COUNTHIGH, val)
-
-/* USB Channel 2 Config Registers */
-
-#define bfin_read_USB_DMA2CONTROL() bfin_read16(USB_DMA2CONTROL)
-#define bfin_write_USB_DMA2CONTROL(val) bfin_write16(USB_DMA2CONTROL, val)
-#define bfin_read_USB_DMA2ADDRLOW() bfin_read16(USB_DMA2ADDRLOW)
-#define bfin_write_USB_DMA2ADDRLOW(val) bfin_write16(USB_DMA2ADDRLOW, val)
-#define bfin_read_USB_DMA2ADDRHIGH() bfin_read16(USB_DMA2ADDRHIGH)
-#define bfin_write_USB_DMA2ADDRHIGH(val) bfin_write16(USB_DMA2ADDRHIGH, val)
-#define bfin_read_USB_DMA2COUNTLOW() bfin_read16(USB_DMA2COUNTLOW)
-#define bfin_write_USB_DMA2COUNTLOW(val) bfin_write16(USB_DMA2COUNTLOW, val)
-#define bfin_read_USB_DMA2COUNTHIGH() bfin_read16(USB_DMA2COUNTHIGH)
-#define bfin_write_USB_DMA2COUNTHIGH(val) bfin_write16(USB_DMA2COUNTHIGH, val)
-
-/* USB Channel 3 Config Registers */
-
-#define bfin_read_USB_DMA3CONTROL() bfin_read16(USB_DMA3CONTROL)
-#define bfin_write_USB_DMA3CONTROL(val) bfin_write16(USB_DMA3CONTROL, val)
-#define bfin_read_USB_DMA3ADDRLOW() bfin_read16(USB_DMA3ADDRLOW)
-#define bfin_write_USB_DMA3ADDRLOW(val) bfin_write16(USB_DMA3ADDRLOW, val)
-#define bfin_read_USB_DMA3ADDRHIGH() bfin_read16(USB_DMA3ADDRHIGH)
-#define bfin_write_USB_DMA3ADDRHIGH(val) bfin_write16(USB_DMA3ADDRHIGH, val)
-#define bfin_read_USB_DMA3COUNTLOW() bfin_read16(USB_DMA3COUNTLOW)
-#define bfin_write_USB_DMA3COUNTLOW(val) bfin_write16(USB_DMA3COUNTLOW, val)
-#define bfin_read_USB_DMA3COUNTHIGH() bfin_read16(USB_DMA3COUNTHIGH)
-#define bfin_write_USB_DMA3COUNTHIGH(val) bfin_write16(USB_DMA3COUNTHIGH, val)
-
-/* USB Channel 4 Config Registers */
-
-#define bfin_read_USB_DMA4CONTROL() bfin_read16(USB_DMA4CONTROL)
-#define bfin_write_USB_DMA4CONTROL(val) bfin_write16(USB_DMA4CONTROL, val)
-#define bfin_read_USB_DMA4ADDRLOW() bfin_read16(USB_DMA4ADDRLOW)
-#define bfin_write_USB_DMA4ADDRLOW(val) bfin_write16(USB_DMA4ADDRLOW, val)
-#define bfin_read_USB_DMA4ADDRHIGH() bfin_read16(USB_DMA4ADDRHIGH)
-#define bfin_write_USB_DMA4ADDRHIGH(val) bfin_write16(USB_DMA4ADDRHIGH, val)
-#define bfin_read_USB_DMA4COUNTLOW() bfin_read16(USB_DMA4COUNTLOW)
-#define bfin_write_USB_DMA4COUNTLOW(val) bfin_write16(USB_DMA4COUNTLOW, val)
-#define bfin_read_USB_DMA4COUNTHIGH() bfin_read16(USB_DMA4COUNTHIGH)
-#define bfin_write_USB_DMA4COUNTHIGH(val) bfin_write16(USB_DMA4COUNTHIGH, val)
-
-/* USB Channel 5 Config Registers */
-
-#define bfin_read_USB_DMA5CONTROL() bfin_read16(USB_DMA5CONTROL)
-#define bfin_write_USB_DMA5CONTROL(val) bfin_write16(USB_DMA5CONTROL, val)
-#define bfin_read_USB_DMA5ADDRLOW() bfin_read16(USB_DMA5ADDRLOW)
-#define bfin_write_USB_DMA5ADDRLOW(val) bfin_write16(USB_DMA5ADDRLOW, val)
-#define bfin_read_USB_DMA5ADDRHIGH() bfin_read16(USB_DMA5ADDRHIGH)
-#define bfin_write_USB_DMA5ADDRHIGH(val) bfin_write16(USB_DMA5ADDRHIGH, val)
-#define bfin_read_USB_DMA5COUNTLOW() bfin_read16(USB_DMA5COUNTLOW)
-#define bfin_write_USB_DMA5COUNTLOW(val) bfin_write16(USB_DMA5COUNTLOW, val)
-#define bfin_read_USB_DMA5COUNTHIGH() bfin_read16(USB_DMA5COUNTHIGH)
-#define bfin_write_USB_DMA5COUNTHIGH(val) bfin_write16(USB_DMA5COUNTHIGH, val)
-
-/* USB Channel 6 Config Registers */
-
-#define bfin_read_USB_DMA6CONTROL() bfin_read16(USB_DMA6CONTROL)
-#define bfin_write_USB_DMA6CONTROL(val) bfin_write16(USB_DMA6CONTROL, val)
-#define bfin_read_USB_DMA6ADDRLOW() bfin_read16(USB_DMA6ADDRLOW)
-#define bfin_write_USB_DMA6ADDRLOW(val) bfin_write16(USB_DMA6ADDRLOW, val)
-#define bfin_read_USB_DMA6ADDRHIGH() bfin_read16(USB_DMA6ADDRHIGH)
-#define bfin_write_USB_DMA6ADDRHIGH(val) bfin_write16(USB_DMA6ADDRHIGH, val)
-#define bfin_read_USB_DMA6COUNTLOW() bfin_read16(USB_DMA6COUNTLOW)
-#define bfin_write_USB_DMA6COUNTLOW(val) bfin_write16(USB_DMA6COUNTLOW, val)
-#define bfin_read_USB_DMA6COUNTHIGH() bfin_read16(USB_DMA6COUNTHIGH)
-#define bfin_write_USB_DMA6COUNTHIGH(val) bfin_write16(USB_DMA6COUNTHIGH, val)
-
-/* USB Channel 7 Config Registers */
-
-#define bfin_read_USB_DMA7CONTROL() bfin_read16(USB_DMA7CONTROL)
-#define bfin_write_USB_DMA7CONTROL(val) bfin_write16(USB_DMA7CONTROL, val)
-#define bfin_read_USB_DMA7ADDRLOW() bfin_read16(USB_DMA7ADDRLOW)
-#define bfin_write_USB_DMA7ADDRLOW(val) bfin_write16(USB_DMA7ADDRLOW, val)
-#define bfin_read_USB_DMA7ADDRHIGH() bfin_read16(USB_DMA7ADDRHIGH)
-#define bfin_write_USB_DMA7ADDRHIGH(val) bfin_write16(USB_DMA7ADDRHIGH, val)
-#define bfin_read_USB_DMA7COUNTLOW() bfin_read16(USB_DMA7COUNTLOW)
-#define bfin_write_USB_DMA7COUNTLOW(val) bfin_write16(USB_DMA7COUNTLOW, val)
-#define bfin_read_USB_DMA7COUNTHIGH() bfin_read16(USB_DMA7COUNTHIGH)
-#define bfin_write_USB_DMA7COUNTHIGH(val) bfin_write16(USB_DMA7COUNTHIGH, val)
-
#endif /* _CDEF_BF527_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
index 7014dde10dd6..12f2ad45314e 100644
--- a/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/cdefBF52x_base.h
@@ -844,6 +844,7 @@
#define bfin_write_PPI_CONTROL(val) bfin_write16(PPI_CONTROL, val)
#define bfin_read_PPI_STATUS() bfin_read16(PPI_STATUS)
#define bfin_write_PPI_STATUS(val) bfin_write16(PPI_STATUS, val)
+#define bfin_clear_PPI_STATUS() bfin_write_PPI_STATUS(0xFFFF)
#define bfin_read_PPI_DELAY() bfin_read16(PPI_DELAY)
#define bfin_write_PPI_DELAY(val) bfin_write16(PPI_DELAY, val)
#define bfin_read_PPI_COUNT() bfin_read16(PPI_COUNT)
@@ -1062,17 +1063,6 @@
#define bfin_read_CNT_MIN() bfin_read32(CNT_MIN)
#define bfin_write_CNT_MIN(val) bfin_write32(CNT_MIN, val)
-/* OTP/FUSE Registers */
-
-#define bfin_read_OTP_CONTROL() bfin_read16(OTP_CONTROL)
-#define bfin_write_OTP_CONTROL(val) bfin_write16(OTP_CONTROL, val)
-#define bfin_read_OTP_BEN() bfin_read16(OTP_BEN)
-#define bfin_write_OTP_BEN(val) bfin_write16(OTP_BEN, val)
-#define bfin_read_OTP_STATUS() bfin_read16(OTP_STATUS)
-#define bfin_write_OTP_STATUS(val) bfin_write16(OTP_STATUS, val)
-#define bfin_read_OTP_TIMING() bfin_read32(OTP_TIMING)
-#define bfin_write_OTP_TIMING(val) bfin_write32(OTP_TIMING, val)
-
/* Security Registers */
#define bfin_read_SECURE_SYSSWT() bfin_read32(SECURE_SYSSWT)
@@ -1082,17 +1072,6 @@
#define bfin_read_SECURE_STATUS() bfin_read16(SECURE_STATUS)
#define bfin_write_SECURE_STATUS(val) bfin_write16(SECURE_STATUS, val)
-/* OTP Read/Write Data Buffer Registers */
-
-#define bfin_read_OTP_DATA0() bfin_read32(OTP_DATA0)
-#define bfin_write_OTP_DATA0(val) bfin_write32(OTP_DATA0, val)
-#define bfin_read_OTP_DATA1() bfin_read32(OTP_DATA1)
-#define bfin_write_OTP_DATA1(val) bfin_write32(OTP_DATA1, val)
-#define bfin_read_OTP_DATA2() bfin_read32(OTP_DATA2)
-#define bfin_write_OTP_DATA2(val) bfin_write32(OTP_DATA2, val)
-#define bfin_read_OTP_DATA3() bfin_read32(OTP_DATA3)
-#define bfin_write_OTP_DATA3(val) bfin_write32(OTP_DATA3, val)
-
/* NFC Registers */
#define bfin_read_NFC_CTL() bfin_read16(NFC_CTL)
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF525.h b/arch/blackfin/mach-bf527/include/mach/defBF525.h
index 82abefc1ef6c..c136f7032962 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF525.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF525.h
@@ -7,15 +7,8 @@
#ifndef _DEF_BF525_H
#define _DEF_BF525_H
-/* Include all Core registers and bit definitions */
-#include <asm/def_LPBlackfin.h>
-
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF525 */
-
-/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */
-#include "defBF52x_base.h"
-
-/* The following are the #defines needed by ADSP-BF525 that are not in the common header */
+/* BF525 is BF522 + USB */
+#include "defBF522.h"
/* USB Control Registers */
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF527.h b/arch/blackfin/mach-bf527/include/mach/defBF527.h
index 570a125df025..4dd58fb33156 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF527.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF527.h
@@ -7,15 +7,9 @@
#ifndef _DEF_BF527_H
#define _DEF_BF527_H
-/* Include all Core registers and bit definitions */
-#include <asm/def_LPBlackfin.h>
+/* BF527 is BF525 + EMAC */
+#include "defBF525.h"
-/* SYSTEM & MMR ADDRESS DEFINITIONS FOR ADSP-BF527 */
-
-/* Include defBF52x_base.h for the set of #defines that are common to all ADSP-BF52x processors */
-#include "defBF52x_base.h"
-
-/* The following are the #defines needed by ADSP-BF527 that are not in the common header */
/* 10/100 Ethernet Controller (0xFFC03000 - 0xFFC031FF) */
#define EMAC_OPMODE 0xFFC03000 /* Operating Mode Register */
@@ -394,673 +388,4 @@
#define TX_GE1024_CNT 0x00200000 /* 1024-Max-Byte TX Frames Sent */
#define TX_ABORT_CNT 0x00400000 /* TX Frames Aborted */
-/* USB Control Registers */
-
-#define USB_FADDR 0xffc03800 /* Function address register */
-#define USB_POWER 0xffc03804 /* Power management register */
-#define USB_INTRTX 0xffc03808 /* Interrupt register for endpoint 0 and Tx endpoint 1 to 7 */
-#define USB_INTRRX 0xffc0380c /* Interrupt register for Rx endpoints 1 to 7 */
-#define USB_INTRTXE 0xffc03810 /* Interrupt enable register for IntrTx */
-#define USB_INTRRXE 0xffc03814 /* Interrupt enable register for IntrRx */
-#define USB_INTRUSB 0xffc03818 /* Interrupt register for common USB interrupts */
-#define USB_INTRUSBE 0xffc0381c /* Interrupt enable register for IntrUSB */
-#define USB_FRAME 0xffc03820 /* USB frame number */
-#define USB_INDEX 0xffc03824 /* Index register for selecting the indexed endpoint registers */
-#define USB_TESTMODE 0xffc03828 /* Enabled USB 20 test modes */
-#define USB_GLOBINTR 0xffc0382c /* Global Interrupt Mask register and Wakeup Exception Interrupt */
-#define USB_GLOBAL_CTL 0xffc03830 /* Global Clock Control for the core */
-
-/* USB Packet Control Registers */
-
-#define USB_TX_MAX_PACKET 0xffc03840 /* Maximum packet size for Host Tx endpoint */
-#define USB_CSR0 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
-#define USB_TXCSR 0xffc03844 /* Control Status register for endpoint 0 and Control Status register for Host Tx endpoint */
-#define USB_RX_MAX_PACKET 0xffc03848 /* Maximum packet size for Host Rx endpoint */
-#define USB_RXCSR 0xffc0384c /* Control Status register for Host Rx endpoint */
-#define USB_COUNT0 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
-#define USB_RXCOUNT 0xffc03850 /* Number of bytes received in endpoint 0 FIFO and Number of bytes received in Host Tx endpoint */
-#define USB_TXTYPE 0xffc03854 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint */
-#define USB_NAKLIMIT0 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
-#define USB_TXINTERVAL 0xffc03858 /* Sets the NAK response timeout on Endpoint 0 and on Bulk transfers for Host Tx endpoint */
-#define USB_RXTYPE 0xffc0385c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint */
-#define USB_RXINTERVAL 0xffc03860 /* Sets the polling interval for Interrupt and Isochronous transfers or the NAK response timeout on Bulk transfers */
-#define USB_TXCOUNT 0xffc03868 /* Number of bytes to be written to the selected endpoint Tx FIFO */
-
-/* USB Endpoint FIFO Registers */
-
-#define USB_EP0_FIFO 0xffc03880 /* Endpoint 0 FIFO */
-#define USB_EP1_FIFO 0xffc03888 /* Endpoint 1 FIFO */
-#define USB_EP2_FIFO 0xffc03890 /* Endpoint 2 FIFO */
-#define USB_EP3_FIFO 0xffc03898 /* Endpoint 3 FIFO */
-#define USB_EP4_FIFO 0xffc038a0 /* Endpoint 4 FIFO */
-#define USB_EP5_FIFO 0xffc038a8 /* Endpoint 5 FIFO */
-#define USB_EP6_FIFO 0xffc038b0 /* Endpoint 6 FIFO */
-#define USB_EP7_FIFO 0xffc038b8 /* Endpoint 7 FIFO */
-
-/* USB OTG Control Registers */
-
-#define USB_OTG_DEV_CTL 0xffc03900 /* OTG Device Control Register */
-#define USB_OTG_VBUS_IRQ 0xffc03904 /* OTG VBUS Control Interrupts */
-#define USB_OTG_VBUS_MASK 0xffc03908 /* VBUS Control Interrupt Enable */
-
-/* USB Phy Control Registers */
-
-#define USB_LINKINFO 0xffc03948 /* Enables programming of some PHY-side delays */
-#define USB_VPLEN 0xffc0394c /* Determines duration of VBUS pulse for VBUS charging */
-#define USB_HS_EOF1 0xffc03950 /* Time buffer for High-Speed transactions */
-#define USB_FS_EOF1 0xffc03954 /* Time buffer for Full-Speed transactions */
-#define USB_LS_EOF1 0xffc03958 /* Time buffer for Low-Speed transactions */
-
-/* (APHY_CNTRL is for ADI usage only) */
-
-#define USB_APHY_CNTRL 0xffc039e0 /* Register that increases visibility of Analog PHY */
-
-/* (APHY_CALIB is for ADI usage only) */
-
-#define USB_APHY_CALIB 0xffc039e4 /* Register used to set some calibration values */
-
-#define USB_APHY_CNTRL2 0xffc039e8 /* Register used to prevent re-enumeration once Moab goes into hibernate mode */
-
-/* (PHY_TEST is for ADI usage only) */
-
-#define USB_PHY_TEST 0xffc039ec /* Used for reducing simulation time and simplifies FIFO testability */
-
-#define USB_PLLOSC_CTRL 0xffc039f0 /* Used to program different parameters for USB PLL and Oscillator */
-#define USB_SRP_CLKDIV 0xffc039f4 /* Used to program clock divide value for the clock fed to the SRP detection logic */
-
-/* USB Endpoint 0 Control Registers */
-
-#define USB_EP_NI0_TXMAXP 0xffc03a00 /* Maximum packet size for Host Tx endpoint0 */
-#define USB_EP_NI0_TXCSR 0xffc03a04 /* Control Status register for endpoint 0 */
-#define USB_EP_NI0_RXMAXP 0xffc03a08 /* Maximum packet size for Host Rx endpoint0 */
-#define USB_EP_NI0_RXCSR 0xffc03a0c /* Control Status register for Host Rx endpoint0 */
-#define USB_EP_NI0_RXCOUNT 0xffc03a10 /* Number of bytes received in endpoint 0 FIFO */
-#define USB_EP_NI0_TXTYPE 0xffc03a14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint0 */
-#define USB_EP_NI0_TXINTERVAL 0xffc03a18 /* Sets the NAK response timeout on Endpoint 0 */
-#define USB_EP_NI0_RXTYPE 0xffc03a1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint0 */
-#define USB_EP_NI0_RXINTERVAL 0xffc03a20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint0 */
-#define USB_EP_NI0_TXCOUNT 0xffc03a28 /* Number of bytes to be written to the endpoint0 Tx FIFO */
-
-/* USB Endpoint 1 Control Registers */
-
-#define USB_EP_NI1_TXMAXP 0xffc03a40 /* Maximum packet size for Host Tx endpoint1 */
-#define USB_EP_NI1_TXCSR 0xffc03a44 /* Control Status register for endpoint1 */
-#define USB_EP_NI1_RXMAXP 0xffc03a48 /* Maximum packet size for Host Rx endpoint1 */
-#define USB_EP_NI1_RXCSR 0xffc03a4c /* Control Status register for Host Rx endpoint1 */
-#define USB_EP_NI1_RXCOUNT 0xffc03a50 /* Number of bytes received in endpoint1 FIFO */
-#define USB_EP_NI1_TXTYPE 0xffc03a54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint1 */
-#define USB_EP_NI1_TXINTERVAL 0xffc03a58 /* Sets the NAK response timeout on Endpoint1 */
-#define USB_EP_NI1_RXTYPE 0xffc03a5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint1 */
-#define USB_EP_NI1_RXINTERVAL 0xffc03a60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint1 */
-#define USB_EP_NI1_TXCOUNT 0xffc03a68 /* Number of bytes to be written to the+H102 endpoint1 Tx FIFO */
-
-/* USB Endpoint 2 Control Registers */
-
-#define USB_EP_NI2_TXMAXP 0xffc03a80 /* Maximum packet size for Host Tx endpoint2 */
-#define USB_EP_NI2_TXCSR 0xffc03a84 /* Control Status register for endpoint2 */
-#define USB_EP_NI2_RXMAXP 0xffc03a88 /* Maximum packet size for Host Rx endpoint2 */
-#define USB_EP_NI2_RXCSR 0xffc03a8c /* Control Status register for Host Rx endpoint2 */
-#define USB_EP_NI2_RXCOUNT 0xffc03a90 /* Number of bytes received in endpoint2 FIFO */
-#define USB_EP_NI2_TXTYPE 0xffc03a94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint2 */
-#define USB_EP_NI2_TXINTERVAL 0xffc03a98 /* Sets the NAK response timeout on Endpoint2 */
-#define USB_EP_NI2_RXTYPE 0xffc03a9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint2 */
-#define USB_EP_NI2_RXINTERVAL 0xffc03aa0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint2 */
-#define USB_EP_NI2_TXCOUNT 0xffc03aa8 /* Number of bytes to be written to the endpoint2 Tx FIFO */
-
-/* USB Endpoint 3 Control Registers */
-
-#define USB_EP_NI3_TXMAXP 0xffc03ac0 /* Maximum packet size for Host Tx endpoint3 */
-#define USB_EP_NI3_TXCSR 0xffc03ac4 /* Control Status register for endpoint3 */
-#define USB_EP_NI3_RXMAXP 0xffc03ac8 /* Maximum packet size for Host Rx endpoint3 */
-#define USB_EP_NI3_RXCSR 0xffc03acc /* Control Status register for Host Rx endpoint3 */
-#define USB_EP_NI3_RXCOUNT 0xffc03ad0 /* Number of bytes received in endpoint3 FIFO */
-#define USB_EP_NI3_TXTYPE 0xffc03ad4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint3 */
-#define USB_EP_NI3_TXINTERVAL 0xffc03ad8 /* Sets the NAK response timeout on Endpoint3 */
-#define USB_EP_NI3_RXTYPE 0xffc03adc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint3 */
-#define USB_EP_NI3_RXINTERVAL 0xffc03ae0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint3 */
-#define USB_EP_NI3_TXCOUNT 0xffc03ae8 /* Number of bytes to be written to the H124endpoint3 Tx FIFO */
-
-/* USB Endpoint 4 Control Registers */
-
-#define USB_EP_NI4_TXMAXP 0xffc03b00 /* Maximum packet size for Host Tx endpoint4 */
-#define USB_EP_NI4_TXCSR 0xffc03b04 /* Control Status register for endpoint4 */
-#define USB_EP_NI4_RXMAXP 0xffc03b08 /* Maximum packet size for Host Rx endpoint4 */
-#define USB_EP_NI4_RXCSR 0xffc03b0c /* Control Status register for Host Rx endpoint4 */
-#define USB_EP_NI4_RXCOUNT 0xffc03b10 /* Number of bytes received in endpoint4 FIFO */
-#define USB_EP_NI4_TXTYPE 0xffc03b14 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint4 */
-#define USB_EP_NI4_TXINTERVAL 0xffc03b18 /* Sets the NAK response timeout on Endpoint4 */
-#define USB_EP_NI4_RXTYPE 0xffc03b1c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint4 */
-#define USB_EP_NI4_RXINTERVAL 0xffc03b20 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint4 */
-#define USB_EP_NI4_TXCOUNT 0xffc03b28 /* Number of bytes to be written to the endpoint4 Tx FIFO */
-
-/* USB Endpoint 5 Control Registers */
-
-#define USB_EP_NI5_TXMAXP 0xffc03b40 /* Maximum packet size for Host Tx endpoint5 */
-#define USB_EP_NI5_TXCSR 0xffc03b44 /* Control Status register for endpoint5 */
-#define USB_EP_NI5_RXMAXP 0xffc03b48 /* Maximum packet size for Host Rx endpoint5 */
-#define USB_EP_NI5_RXCSR 0xffc03b4c /* Control Status register for Host Rx endpoint5 */
-#define USB_EP_NI5_RXCOUNT 0xffc03b50 /* Number of bytes received in endpoint5 FIFO */
-#define USB_EP_NI5_TXTYPE 0xffc03b54 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint5 */
-#define USB_EP_NI5_TXINTERVAL 0xffc03b58 /* Sets the NAK response timeout on Endpoint5 */
-#define USB_EP_NI5_RXTYPE 0xffc03b5c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint5 */
-#define USB_EP_NI5_RXINTERVAL 0xffc03b60 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint5 */
-#define USB_EP_NI5_TXCOUNT 0xffc03b68 /* Number of bytes to be written to the endpoint5 Tx FIFO */
-
-/* USB Endpoint 6 Control Registers */
-
-#define USB_EP_NI6_TXMAXP 0xffc03b80 /* Maximum packet size for Host Tx endpoint6 */
-#define USB_EP_NI6_TXCSR 0xffc03b84 /* Control Status register for endpoint6 */
-#define USB_EP_NI6_RXMAXP 0xffc03b88 /* Maximum packet size for Host Rx endpoint6 */
-#define USB_EP_NI6_RXCSR 0xffc03b8c /* Control Status register for Host Rx endpoint6 */
-#define USB_EP_NI6_RXCOUNT 0xffc03b90 /* Number of bytes received in endpoint6 FIFO */
-#define USB_EP_NI6_TXTYPE 0xffc03b94 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint6 */
-#define USB_EP_NI6_TXINTERVAL 0xffc03b98 /* Sets the NAK response timeout on Endpoint6 */
-#define USB_EP_NI6_RXTYPE 0xffc03b9c /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint6 */
-#define USB_EP_NI6_RXINTERVAL 0xffc03ba0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint6 */
-#define USB_EP_NI6_TXCOUNT 0xffc03ba8 /* Number of bytes to be written to the endpoint6 Tx FIFO */
-
-/* USB Endpoint 7 Control Registers */
-
-#define USB_EP_NI7_TXMAXP 0xffc03bc0 /* Maximum packet size for Host Tx endpoint7 */
-#define USB_EP_NI7_TXCSR 0xffc03bc4 /* Control Status register for endpoint7 */
-#define USB_EP_NI7_RXMAXP 0xffc03bc8 /* Maximum packet size for Host Rx endpoint7 */
-#define USB_EP_NI7_RXCSR 0xffc03bcc /* Control Status register for Host Rx endpoint7 */
-#define USB_EP_NI7_RXCOUNT 0xffc03bd0 /* Number of bytes received in endpoint7 FIFO */
-#define USB_EP_NI7_TXTYPE 0xffc03bd4 /* Sets the transaction protocol and peripheral endpoint number for the Host Tx endpoint7 */
-#define USB_EP_NI7_TXINTERVAL 0xffc03bd8 /* Sets the NAK response timeout on Endpoint7 */
-#define USB_EP_NI7_RXTYPE 0xffc03bdc /* Sets the transaction protocol and peripheral endpoint number for the Host Rx endpoint7 */
-#define USB_EP_NI7_RXINTERVAL 0xffc03bf0 /* Sets the polling interval for Interrupt/Isochronous transfers or the NAK response timeout on Bulk transfers for Host Rx endpoint7 */
-#define USB_EP_NI7_TXCOUNT 0xffc03bf8 /* Number of bytes to be written to the endpoint7 Tx FIFO */
-
-#define USB_DMA_INTERRUPT 0xffc03c00 /* Indicates pending interrupts for the DMA channels */
-
-/* USB Channel 0 Config Registers */
-
-#define USB_DMA0CONTROL 0xffc03c04 /* DMA master channel 0 configuration */
-#define USB_DMA0ADDRLOW 0xffc03c08 /* Lower 16-bits of memory source/destination address for DMA master channel 0 */
-#define USB_DMA0ADDRHIGH 0xffc03c0c /* Upper 16-bits of memory source/destination address for DMA master channel 0 */
-#define USB_DMA0COUNTLOW 0xffc03c10 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 0 */
-#define USB_DMA0COUNTHIGH 0xffc03c14 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 0 */
-
-/* USB Channel 1 Config Registers */
-
-#define USB_DMA1CONTROL 0xffc03c24 /* DMA master channel 1 configuration */
-#define USB_DMA1ADDRLOW 0xffc03c28 /* Lower 16-bits of memory source/destination address for DMA master channel 1 */
-#define USB_DMA1ADDRHIGH 0xffc03c2c /* Upper 16-bits of memory source/destination address for DMA master channel 1 */
-#define USB_DMA1COUNTLOW 0xffc03c30 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 1 */
-#define USB_DMA1COUNTHIGH 0xffc03c34 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 1 */
-
-/* USB Channel 2 Config Registers */
-
-#define USB_DMA2CONTROL 0xffc03c44 /* DMA master channel 2 configuration */
-#define USB_DMA2ADDRLOW 0xffc03c48 /* Lower 16-bits of memory source/destination address for DMA master channel 2 */
-#define USB_DMA2ADDRHIGH 0xffc03c4c /* Upper 16-bits of memory source/destination address for DMA master channel 2 */
-#define USB_DMA2COUNTLOW 0xffc03c50 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 2 */
-#define USB_DMA2COUNTHIGH 0xffc03c54 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 2 */
-
-/* USB Channel 3 Config Registers */
-
-#define USB_DMA3CONTROL 0xffc03c64 /* DMA master channel 3 configuration */
-#define USB_DMA3ADDRLOW 0xffc03c68 /* Lower 16-bits of memory source/destination address for DMA master channel 3 */
-#define USB_DMA3ADDRHIGH 0xffc03c6c /* Upper 16-bits of memory source/destination address for DMA master channel 3 */
-#define USB_DMA3COUNTLOW 0xffc03c70 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 3 */
-#define USB_DMA3COUNTHIGH 0xffc03c74 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 3 */
-
-/* USB Channel 4 Config Registers */
-
-#define USB_DMA4CONTROL 0xffc03c84 /* DMA master channel 4 configuration */
-#define USB_DMA4ADDRLOW 0xffc03c88 /* Lower 16-bits of memory source/destination address for DMA master channel 4 */
-#define USB_DMA4ADDRHIGH 0xffc03c8c /* Upper 16-bits of memory source/destination address for DMA master channel 4 */
-#define USB_DMA4COUNTLOW 0xffc03c90 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 4 */
-#define USB_DMA4COUNTHIGH 0xffc03c94 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 4 */
-
-/* USB Channel 5 Config Registers */
-
-#define USB_DMA5CONTROL 0xffc03ca4 /* DMA master channel 5 configuration */
-#define USB_DMA5ADDRLOW 0xffc03ca8 /* Lower 16-bits of memory source/destination address for DMA master channel 5 */
-#define USB_DMA5ADDRHIGH 0xffc03cac /* Upper 16-bits of memory source/destination address for DMA master channel 5 */
-#define USB_DMA5COUNTLOW 0xffc03cb0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 5 */
-#define USB_DMA5COUNTHIGH 0xffc03cb4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 5 */
-
-/* USB Channel 6 Config Registers */
-
-#define USB_DMA6CONTROL 0xffc03cc4 /* DMA master channel 6 configuration */
-#define USB_DMA6ADDRLOW 0xffc03cc8 /* Lower 16-bits of memory source/destination address for DMA master channel 6 */
-#define USB_DMA6ADDRHIGH 0xffc03ccc /* Upper 16-bits of memory source/destination address for DMA master channel 6 */
-#define USB_DMA6COUNTLOW 0xffc03cd0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 6 */
-#define USB_DMA6COUNTHIGH 0xffc03cd4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 6 */
-
-/* USB Channel 7 Config Registers */
-
-#define USB_DMA7CONTROL 0xffc03ce4 /* DMA master channel 7 configuration */
-#define USB_DMA7ADDRLOW 0xffc03ce8 /* Lower 16-bits of memory source/destination address for DMA master channel 7 */
-#define USB_DMA7ADDRHIGH 0xffc03cec /* Upper 16-bits of memory source/destination address for DMA master channel 7 */
-#define USB_DMA7COUNTLOW 0xffc03cf0 /* Lower 16-bits of byte count of DMA transfer for DMA master channel 7 */
-#define USB_DMA7COUNTHIGH 0xffc03cf4 /* Upper 16-bits of byte count of DMA transfer for DMA master channel 7 */
-
-/* Bit masks for USB_FADDR */
-
-#define FUNCTION_ADDRESS 0x7f /* Function address */
-
-/* Bit masks for USB_POWER */
-
-#define ENABLE_SUSPENDM 0x1 /* enable SuspendM output */
-#define nENABLE_SUSPENDM 0x0
-#define SUSPEND_MODE 0x2 /* Suspend Mode indicator */
-#define nSUSPEND_MODE 0x0
-#define RESUME_MODE 0x4 /* DMA Mode */
-#define nRESUME_MODE 0x0
-#define RESET 0x8 /* Reset indicator */
-#define nRESET 0x0
-#define HS_MODE 0x10 /* High Speed mode indicator */
-#define nHS_MODE 0x0
-#define HS_ENABLE 0x20 /* high Speed Enable */
-#define nHS_ENABLE 0x0
-#define SOFT_CONN 0x40 /* Soft connect */
-#define nSOFT_CONN 0x0
-#define ISO_UPDATE 0x80 /* Isochronous update */
-#define nISO_UPDATE 0x0
-
-/* Bit masks for USB_INTRTX */
-
-#define EP0_TX 0x1 /* Tx Endpoint 0 interrupt */
-#define nEP0_TX 0x0
-#define EP1_TX 0x2 /* Tx Endpoint 1 interrupt */
-#define nEP1_TX 0x0
-#define EP2_TX 0x4 /* Tx Endpoint 2 interrupt */
-#define nEP2_TX 0x0
-#define EP3_TX 0x8 /* Tx Endpoint 3 interrupt */
-#define nEP3_TX 0x0
-#define EP4_TX 0x10 /* Tx Endpoint 4 interrupt */
-#define nEP4_TX 0x0
-#define EP5_TX 0x20 /* Tx Endpoint 5 interrupt */
-#define nEP5_TX 0x0
-#define EP6_TX 0x40 /* Tx Endpoint 6 interrupt */
-#define nEP6_TX 0x0
-#define EP7_TX 0x80 /* Tx Endpoint 7 interrupt */
-#define nEP7_TX 0x0
-
-/* Bit masks for USB_INTRRX */
-
-#define EP1_RX 0x2 /* Rx Endpoint 1 interrupt */
-#define nEP1_RX 0x0
-#define EP2_RX 0x4 /* Rx Endpoint 2 interrupt */
-#define nEP2_RX 0x0
-#define EP3_RX 0x8 /* Rx Endpoint 3 interrupt */
-#define nEP3_RX 0x0
-#define EP4_RX 0x10 /* Rx Endpoint 4 interrupt */
-#define nEP4_RX 0x0
-#define EP5_RX 0x20 /* Rx Endpoint 5 interrupt */
-#define nEP5_RX 0x0
-#define EP6_RX 0x40 /* Rx Endpoint 6 interrupt */
-#define nEP6_RX 0x0
-#define EP7_RX 0x80 /* Rx Endpoint 7 interrupt */
-#define nEP7_RX 0x0
-
-/* Bit masks for USB_INTRTXE */
-
-#define EP0_TX_E 0x1 /* Endpoint 0 interrupt Enable */
-#define nEP0_TX_E 0x0
-#define EP1_TX_E 0x2 /* Tx Endpoint 1 interrupt Enable */
-#define nEP1_TX_E 0x0
-#define EP2_TX_E 0x4 /* Tx Endpoint 2 interrupt Enable */
-#define nEP2_TX_E 0x0
-#define EP3_TX_E 0x8 /* Tx Endpoint 3 interrupt Enable */
-#define nEP3_TX_E 0x0
-#define EP4_TX_E 0x10 /* Tx Endpoint 4 interrupt Enable */
-#define nEP4_TX_E 0x0
-#define EP5_TX_E 0x20 /* Tx Endpoint 5 interrupt Enable */
-#define nEP5_TX_E 0x0
-#define EP6_TX_E 0x40 /* Tx Endpoint 6 interrupt Enable */
-#define nEP6_TX_E 0x0
-#define EP7_TX_E 0x80 /* Tx Endpoint 7 interrupt Enable */
-#define nEP7_TX_E 0x0
-
-/* Bit masks for USB_INTRRXE */
-
-#define EP1_RX_E 0x2 /* Rx Endpoint 1 interrupt Enable */
-#define nEP1_RX_E 0x0
-#define EP2_RX_E 0x4 /* Rx Endpoint 2 interrupt Enable */
-#define nEP2_RX_E 0x0
-#define EP3_RX_E 0x8 /* Rx Endpoint 3 interrupt Enable */
-#define nEP3_RX_E 0x0
-#define EP4_RX_E 0x10 /* Rx Endpoint 4 interrupt Enable */
-#define nEP4_RX_E 0x0
-#define EP5_RX_E 0x20 /* Rx Endpoint 5 interrupt Enable */
-#define nEP5_RX_E 0x0
-#define EP6_RX_E 0x40 /* Rx Endpoint 6 interrupt Enable */
-#define nEP6_RX_E 0x0
-#define EP7_RX_E 0x80 /* Rx Endpoint 7 interrupt Enable */
-#define nEP7_RX_E 0x0
-
-/* Bit masks for USB_INTRUSB */
-
-#define SUSPEND_B 0x1 /* Suspend indicator */
-#define nSUSPEND_B 0x0
-#define RESUME_B 0x2 /* Resume indicator */
-#define nRESUME_B 0x0
-#define RESET_OR_BABLE_B 0x4 /* Reset/babble indicator */
-#define nRESET_OR_BABLE_B 0x0
-#define SOF_B 0x8 /* Start of frame */
-#define nSOF_B 0x0
-#define CONN_B 0x10 /* Connection indicator */
-#define nCONN_B 0x0
-#define DISCON_B 0x20 /* Disconnect indicator */
-#define nDISCON_B 0x0
-#define SESSION_REQ_B 0x40 /* Session Request */
-#define nSESSION_REQ_B 0x0
-#define VBUS_ERROR_B 0x80 /* Vbus threshold indicator */
-#define nVBUS_ERROR_B 0x0
-
-/* Bit masks for USB_INTRUSBE */
-
-#define SUSPEND_BE 0x1 /* Suspend indicator int enable */
-#define nSUSPEND_BE 0x0
-#define RESUME_BE 0x2 /* Resume indicator int enable */
-#define nRESUME_BE 0x0
-#define RESET_OR_BABLE_BE 0x4 /* Reset/babble indicator int enable */
-#define nRESET_OR_BABLE_BE 0x0
-#define SOF_BE 0x8 /* Start of frame int enable */
-#define nSOF_BE 0x0
-#define CONN_BE 0x10 /* Connection indicator int enable */
-#define nCONN_BE 0x0
-#define DISCON_BE 0x20 /* Disconnect indicator int enable */
-#define nDISCON_BE 0x0
-#define SESSION_REQ_BE 0x40 /* Session Request int enable */
-#define nSESSION_REQ_BE 0x0
-#define VBUS_ERROR_BE 0x80 /* Vbus threshold indicator int enable */
-#define nVBUS_ERROR_BE 0x0
-
-/* Bit masks for USB_FRAME */
-
-#define FRAME_NUMBER 0x7ff /* Frame number */
-
-/* Bit masks for USB_INDEX */
-
-#define SELECTED_ENDPOINT 0xf /* selected endpoint */
-
-/* Bit masks for USB_GLOBAL_CTL */
-
-#define GLOBAL_ENA 0x1 /* enables USB module */
-#define nGLOBAL_ENA 0x0
-#define EP1_TX_ENA 0x2 /* Transmit endpoint 1 enable */
-#define nEP1_TX_ENA 0x0
-#define EP2_TX_ENA 0x4 /* Transmit endpoint 2 enable */
-#define nEP2_TX_ENA 0x0
-#define EP3_TX_ENA 0x8 /* Transmit endpoint 3 enable */
-#define nEP3_TX_ENA 0x0
-#define EP4_TX_ENA 0x10 /* Transmit endpoint 4 enable */
-#define nEP4_TX_ENA 0x0
-#define EP5_TX_ENA 0x20 /* Transmit endpoint 5 enable */
-#define nEP5_TX_ENA 0x0
-#define EP6_TX_ENA 0x40 /* Transmit endpoint 6 enable */
-#define nEP6_TX_ENA 0x0
-#define EP7_TX_ENA 0x80 /* Transmit endpoint 7 enable */
-#define nEP7_TX_ENA 0x0
-#define EP1_RX_ENA 0x100 /* Receive endpoint 1 enable */
-#define nEP1_RX_ENA 0x0
-#define EP2_RX_ENA 0x200 /* Receive endpoint 2 enable */
-#define nEP2_RX_ENA 0x0
-#define EP3_RX_ENA 0x400 /* Receive endpoint 3 enable */
-#define nEP3_RX_ENA 0x0
-#define EP4_RX_ENA 0x800 /* Receive endpoint 4 enable */
-#define nEP4_RX_ENA 0x0
-#define EP5_RX_ENA 0x1000 /* Receive endpoint 5 enable */
-#define nEP5_RX_ENA 0x0
-#define EP6_RX_ENA 0x2000 /* Receive endpoint 6 enable */
-#define nEP6_RX_ENA 0x0
-#define EP7_RX_ENA 0x4000 /* Receive endpoint 7 enable */
-#define nEP7_RX_ENA 0x0
-
-/* Bit masks for USB_OTG_DEV_CTL */
-
-#define SESSION 0x1 /* session indicator */
-#define nSESSION 0x0
-#define HOST_REQ 0x2 /* Host negotiation request */
-#define nHOST_REQ 0x0
-#define HOST_MODE 0x4 /* indicates USBDRC is a host */
-#define nHOST_MODE 0x0
-#define VBUS0 0x8 /* Vbus level indicator[0] */
-#define nVBUS0 0x0
-#define VBUS1 0x10 /* Vbus level indicator[1] */
-#define nVBUS1 0x0
-#define LSDEV 0x20 /* Low-speed indicator */
-#define nLSDEV 0x0
-#define FSDEV 0x40 /* Full or High-speed indicator */
-#define nFSDEV 0x0
-#define B_DEVICE 0x80 /* A' or 'B' device indicator */
-#define nB_DEVICE 0x0
-
-/* Bit masks for USB_OTG_VBUS_IRQ */
-
-#define DRIVE_VBUS_ON 0x1 /* indicator to drive VBUS control circuit */
-#define nDRIVE_VBUS_ON 0x0
-#define DRIVE_VBUS_OFF 0x2 /* indicator to shut off charge pump */
-#define nDRIVE_VBUS_OFF 0x0
-#define CHRG_VBUS_START 0x4 /* indicator for external circuit to start charging VBUS */
-#define nCHRG_VBUS_START 0x0
-#define CHRG_VBUS_END 0x8 /* indicator for external circuit to end charging VBUS */
-#define nCHRG_VBUS_END 0x0
-#define DISCHRG_VBUS_START 0x10 /* indicator to start discharging VBUS */
-#define nDISCHRG_VBUS_START 0x0
-#define DISCHRG_VBUS_END 0x20 /* indicator to stop discharging VBUS */
-#define nDISCHRG_VBUS_END 0x0
-
-/* Bit masks for USB_OTG_VBUS_MASK */
-
-#define DRIVE_VBUS_ON_ENA 0x1 /* enable DRIVE_VBUS_ON interrupt */
-#define nDRIVE_VBUS_ON_ENA 0x0
-#define DRIVE_VBUS_OFF_ENA 0x2 /* enable DRIVE_VBUS_OFF interrupt */
-#define nDRIVE_VBUS_OFF_ENA 0x0
-#define CHRG_VBUS_START_ENA 0x4 /* enable CHRG_VBUS_START interrupt */
-#define nCHRG_VBUS_START_ENA 0x0
-#define CHRG_VBUS_END_ENA 0x8 /* enable CHRG_VBUS_END interrupt */
-#define nCHRG_VBUS_END_ENA 0x0
-#define DISCHRG_VBUS_START_ENA 0x10 /* enable DISCHRG_VBUS_START interrupt */
-#define nDISCHRG_VBUS_START_ENA 0x0
-#define DISCHRG_VBUS_END_ENA 0x20 /* enable DISCHRG_VBUS_END interrupt */
-#define nDISCHRG_VBUS_END_ENA 0x0
-
-/* Bit masks for USB_CSR0 */
-
-#define RXPKTRDY 0x1 /* data packet receive indicator */
-#define nRXPKTRDY 0x0
-#define TXPKTRDY 0x2 /* data packet in FIFO indicator */
-#define nTXPKTRDY 0x0
-#define STALL_SENT 0x4 /* STALL handshake sent */
-#define nSTALL_SENT 0x0
-#define DATAEND 0x8 /* Data end indicator */
-#define nDATAEND 0x0
-#define SETUPEND 0x10 /* Setup end */
-#define nSETUPEND 0x0
-#define SENDSTALL 0x20 /* Send STALL handshake */
-#define nSENDSTALL 0x0
-#define SERVICED_RXPKTRDY 0x40 /* used to clear the RxPktRdy bit */
-#define nSERVICED_RXPKTRDY 0x0
-#define SERVICED_SETUPEND 0x80 /* used to clear the SetupEnd bit */
-#define nSERVICED_SETUPEND 0x0
-#define FLUSHFIFO 0x100 /* flush endpoint FIFO */
-#define nFLUSHFIFO 0x0
-#define STALL_RECEIVED_H 0x4 /* STALL handshake received host mode */
-#define nSTALL_RECEIVED_H 0x0
-#define SETUPPKT_H 0x8 /* send Setup token host mode */
-#define nSETUPPKT_H 0x0
-#define ERROR_H 0x10 /* timeout error indicator host mode */
-#define nERROR_H 0x0
-#define REQPKT_H 0x20 /* Request an IN transaction host mode */
-#define nREQPKT_H 0x0
-#define STATUSPKT_H 0x40 /* Status stage transaction host mode */
-#define nSTATUSPKT_H 0x0
-#define NAK_TIMEOUT_H 0x80 /* EP0 halted after a NAK host mode */
-#define nNAK_TIMEOUT_H 0x0
-
-/* Bit masks for USB_COUNT0 */
-
-#define EP0_RX_COUNT 0x7f /* number of received bytes in EP0 FIFO */
-
-/* Bit masks for USB_NAKLIMIT0 */
-
-#define EP0_NAK_LIMIT 0x1f /* number of frames/micro frames after which EP0 timeouts */
-
-/* Bit masks for USB_TX_MAX_PACKET */
-
-#define MAX_PACKET_SIZE_T 0x7ff /* maximum data pay load in a frame */
-
-/* Bit masks for USB_RX_MAX_PACKET */
-
-#define MAX_PACKET_SIZE_R 0x7ff /* maximum data pay load in a frame */
-
-/* Bit masks for USB_TXCSR */
-
-#define TXPKTRDY_T 0x1 /* data packet in FIFO indicator */
-#define nTXPKTRDY_T 0x0
-#define FIFO_NOT_EMPTY_T 0x2 /* FIFO not empty */
-#define nFIFO_NOT_EMPTY_T 0x0
-#define UNDERRUN_T 0x4 /* TxPktRdy not set for an IN token */
-#define nUNDERRUN_T 0x0
-#define FLUSHFIFO_T 0x8 /* flush endpoint FIFO */
-#define nFLUSHFIFO_T 0x0
-#define STALL_SEND_T 0x10 /* issue a Stall handshake */
-#define nSTALL_SEND_T 0x0
-#define STALL_SENT_T 0x20 /* Stall handshake transmitted */
-#define nSTALL_SENT_T 0x0
-#define CLEAR_DATATOGGLE_T 0x40 /* clear endpoint data toggle */
-#define nCLEAR_DATATOGGLE_T 0x0
-#define INCOMPTX_T 0x80 /* indicates that a large packet is split */
-#define nINCOMPTX_T 0x0
-#define DMAREQMODE_T 0x400 /* DMA mode (0 or 1) selection */
-#define nDMAREQMODE_T 0x0
-#define FORCE_DATATOGGLE_T 0x800 /* Force data toggle */
-#define nFORCE_DATATOGGLE_T 0x0
-#define DMAREQ_ENA_T 0x1000 /* Enable DMA request for Tx EP */
-#define nDMAREQ_ENA_T 0x0
-#define ISO_T 0x4000 /* enable Isochronous transfers */
-#define nISO_T 0x0
-#define AUTOSET_T 0x8000 /* allows TxPktRdy to be set automatically */
-#define nAUTOSET_T 0x0
-#define ERROR_TH 0x4 /* error condition host mode */
-#define nERROR_TH 0x0
-#define STALL_RECEIVED_TH 0x20 /* Stall handshake received host mode */
-#define nSTALL_RECEIVED_TH 0x0
-#define NAK_TIMEOUT_TH 0x80 /* NAK timeout host mode */
-#define nNAK_TIMEOUT_TH 0x0
-
-/* Bit masks for USB_TXCOUNT */
-
-#define TX_COUNT 0x1fff /* Number of bytes to be written to the selected endpoint Tx FIFO */
-
-/* Bit masks for USB_RXCSR */
-
-#define RXPKTRDY_R 0x1 /* data packet in FIFO indicator */
-#define nRXPKTRDY_R 0x0
-#define FIFO_FULL_R 0x2 /* FIFO not empty */
-#define nFIFO_FULL_R 0x0
-#define OVERRUN_R 0x4 /* TxPktRdy not set for an IN token */
-#define nOVERRUN_R 0x0
-#define DATAERROR_R 0x8 /* Out packet cannot be loaded into Rx FIFO */
-#define nDATAERROR_R 0x0
-#define FLUSHFIFO_R 0x10 /* flush endpoint FIFO */
-#define nFLUSHFIFO_R 0x0
-#define STALL_SEND_R 0x20 /* issue a Stall handshake */
-#define nSTALL_SEND_R 0x0
-#define STALL_SENT_R 0x40 /* Stall handshake transmitted */
-#define nSTALL_SENT_R 0x0
-#define CLEAR_DATATOGGLE_R 0x80 /* clear endpoint data toggle */
-#define nCLEAR_DATATOGGLE_R 0x0
-#define INCOMPRX_R 0x100 /* indicates that a large packet is split */
-#define nINCOMPRX_R 0x0
-#define DMAREQMODE_R 0x800 /* DMA mode (0 or 1) selection */
-#define nDMAREQMODE_R 0x0
-#define DISNYET_R 0x1000 /* disable Nyet handshakes */
-#define nDISNYET_R 0x0
-#define DMAREQ_ENA_R 0x2000 /* Enable DMA request for Tx EP */
-#define nDMAREQ_ENA_R 0x0
-#define ISO_R 0x4000 /* enable Isochronous transfers */
-#define nISO_R 0x0
-#define AUTOCLEAR_R 0x8000 /* allows TxPktRdy to be set automatically */
-#define nAUTOCLEAR_R 0x0
-#define ERROR_RH 0x4 /* TxPktRdy not set for an IN token host mode */
-#define nERROR_RH 0x0
-#define REQPKT_RH 0x20 /* request an IN transaction host mode */
-#define nREQPKT_RH 0x0
-#define STALL_RECEIVED_RH 0x40 /* Stall handshake received host mode */
-#define nSTALL_RECEIVED_RH 0x0
-#define INCOMPRX_RH 0x100 /* indicates that a large packet is split host mode */
-#define nINCOMPRX_RH 0x0
-#define DMAREQMODE_RH 0x800 /* DMA mode (0 or 1) selection host mode */
-#define nDMAREQMODE_RH 0x0
-#define AUTOREQ_RH 0x4000 /* sets ReqPkt automatically host mode */
-#define nAUTOREQ_RH 0x0
-
-/* Bit masks for USB_RXCOUNT */
-
-#define RX_COUNT 0x1fff /* Number of received bytes in the packet in the Rx FIFO */
-
-/* Bit masks for USB_TXTYPE */
-
-#define TARGET_EP_NO_T 0xf /* EP number */
-#define PROTOCOL_T 0xc /* transfer type */
-
-/* Bit masks for USB_TXINTERVAL */
-
-#define TX_POLL_INTERVAL 0xff /* polling interval for selected Tx EP */
-
-/* Bit masks for USB_RXTYPE */
-
-#define TARGET_EP_NO_R 0xf /* EP number */
-#define PROTOCOL_R 0xc /* transfer type */
-
-/* Bit masks for USB_RXINTERVAL */
-
-#define RX_POLL_INTERVAL 0xff /* polling interval for selected Rx EP */
-
-/* Bit masks for USB_DMA_INTERRUPT */
-
-#define DMA0_INT 0x1 /* DMA0 pending interrupt */
-#define nDMA0_INT 0x0
-#define DMA1_INT 0x2 /* DMA1 pending interrupt */
-#define nDMA1_INT 0x0
-#define DMA2_INT 0x4 /* DMA2 pending interrupt */
-#define nDMA2_INT 0x0
-#define DMA3_INT 0x8 /* DMA3 pending interrupt */
-#define nDMA3_INT 0x0
-#define DMA4_INT 0x10 /* DMA4 pending interrupt */
-#define nDMA4_INT 0x0
-#define DMA5_INT 0x20 /* DMA5 pending interrupt */
-#define nDMA5_INT 0x0
-#define DMA6_INT 0x40 /* DMA6 pending interrupt */
-#define nDMA6_INT 0x0
-#define DMA7_INT 0x80 /* DMA7 pending interrupt */
-#define nDMA7_INT 0x0
-
-/* Bit masks for USB_DMAxCONTROL */
-
-#define DMA_ENA 0x1 /* DMA enable */
-#define nDMA_ENA 0x0
-#define DIRECTION 0x2 /* direction of DMA transfer */
-#define nDIRECTION 0x0
-#define MODE 0x4 /* DMA Bus error */
-#define nMODE 0x0
-#define INT_ENA 0x8 /* Interrupt enable */
-#define nINT_ENA 0x0
-#define EPNUM 0xf0 /* EP number */
-#define BUSERROR 0x100 /* DMA Bus error */
-#define nBUSERROR 0x0
-
-/* Bit masks for USB_DMAxADDRHIGH */
-
-#define DMA_ADDR_HIGH 0xffff /* Upper 16-bits of memory source/destination address for the DMA master channel */
-
-/* Bit masks for USB_DMAxADDRLOW */
-
-#define DMA_ADDR_LOW 0xffff /* Lower 16-bits of memory source/destination address for the DMA master channel */
-
-/* Bit masks for USB_DMAxCOUNTHIGH */
-
-#define DMA_COUNT_HIGH 0xffff /* Upper 16-bits of byte count of DMA transfer for DMA master channel */
-
-/* Bit masks for USB_DMAxCOUNTLOW */
-
-#define DMA_COUNT_LOW 0xffff /* Lower 16-bits of byte count of DMA transfer for DMA master channel */
-
#endif /* _DEF_BF527_H */
diff --git a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
index b9dbb73d7ef0..8b18b5359210 100644
--- a/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
+++ b/arch/blackfin/mach-bf527/include/mach/defBF52x_base.h
@@ -586,58 +586,6 @@
** modifier UNLESS the lower order bits are saved and ORed back in when
** the macro is used.
*************************************************************************************/
-/*
-** ********************* PLL AND RESET MASKS ****************************************/
-/* PLL_CTL Masks */
-#define DF 0x0001 /* 0: PLL = CLKIN, 1: PLL = CLKIN/2 */
-#define PLL_OFF 0x0002 /* PLL Not Powered */
-#define STOPCK 0x0008 /* Core Clock Off */
-#define PDWN 0x0020 /* Enter Deep Sleep Mode */
-#define IN_DELAY 0x0040 /* Add 200ps Delay To EBIU Input Latches */
-#define OUT_DELAY 0x0080 /* Add 200ps Delay To EBIU Output Signals */
-#define BYPASS 0x0100 /* Bypass the PLL */
-#define MSEL 0x7E00 /* Multiplier Select For CCLK/VCO Factors */
-/* PLL_CTL Macros (Only Use With Logic OR While Setting Lower Order Bits) */
-#define SET_MSEL(x) (((x)&0x3F) << 0x9) /* Set MSEL = 0-63 --> VCO = CLKIN*MSEL */
-
-/* PLL_DIV Masks */
-#define SSEL 0x000F /* System Select */
-#define CSEL 0x0030 /* Core Select */
-#define CSEL_DIV1 0x0000 /* CCLK = VCO / 1 */
-#define CSEL_DIV2 0x0010 /* CCLK = VCO / 2 */
-#define CSEL_DIV4 0x0020 /* CCLK = VCO / 4 */
-#define CSEL_DIV8 0x0030 /* CCLK = VCO / 8 */
-/* PLL_DIV Macros */
-#define SET_SSEL(x) ((x)&0xF) /* Set SSEL = 0-15 --> SCLK = VCO/SSEL */
-
-/* VR_CTL Masks */
-#define FREQ 0x3000 /* Switching Oscillator Frequency For Regulator */
-#define HIBERNATE 0x0000 /* Powerdown/Bypass On-Board Regulation */
-
-#define VLEV 0x00F0 /* Internal Voltage Level */
-#define VLEV_085 0x0060 /* VLEV = 0.85 V (-5% - +10% Accuracy) */
-#define VLEV_090 0x0070 /* VLEV = 0.90 V (-5% - +10% Accuracy) */
-#define VLEV_095 0x0080 /* VLEV = 0.95 V (-5% - +10% Accuracy) */
-#define VLEV_100 0x0090 /* VLEV = 1.00 V (-5% - +10% Accuracy) */
-#define VLEV_105 0x00A0 /* VLEV = 1.05 V (-5% - +10% Accuracy) */
-#define VLEV_110 0x00B0 /* VLEV = 1.10 V (-5% - +10% Accuracy) */
-#define VLEV_115 0x00C0 /* VLEV = 1.15 V (-5% - +10% Accuracy) */
-#define VLEV_120 0x00D0 /* VLEV = 1.20 V (-5% - +10% Accuracy) */
-#define VLEV_125 0x00E0 /* VLEV = 1.25 V (-5% - +10% Accuracy) */
-#define VLEV_130 0x00F0 /* VLEV = 1.30 V (-5% - +10% Accuracy) */
-
-#define WAKE 0x0100 /* Enable RTC/Reset Wakeup From Hibernate */
-#define USBWE 0x0200 /* Enable USB Wakeup From Hibernate */
-#define PHYWE 0x0400 /* Enable PHY Wakeup From Hibernate */
-#define CLKBUFOE 0x4000 /* CLKIN Buffer Output Enable */
-#define PHYCLKOE CLKBUFOE /* Alternative legacy name for the above */
-#define SCKELOW 0x8000 /* Enable Drive CKE Low During Reset */
-
-/* PLL_STAT Masks */
-#define ACTIVE_PLLENABLED 0x0001 /* Processor In Active Mode With PLL Enabled */
-#define FULL_ON 0x0002 /* Processor In Full On Mode */
-#define ACTIVE_PLLDISABLED 0x0004 /* Processor In Active Mode With PLL Disabled */
-#define PLL_LOCKED 0x0020 /* PLL_LOCKCNT Has Been Reached */
/* CHIPID Masks */
#define CHIPID_VERSION 0xF0000000
@@ -757,66 +705,6 @@
#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << ((x)&0x1F))) /* Wakeup Disable Peripheral #x */
-/* ********* WATCHDOG TIMER MASKS ******************** */
-
-/* Watchdog Timer WDOG_CTL Register Masks */
-
-#define WDEV(x) (((x)<<1) & 0x0006) /* event generated on roll over */
-#define WDEV_RESET 0x0000 /* generate reset event on roll over */
-#define WDEV_NMI 0x0002 /* generate NMI event on roll over */
-#define WDEV_GPI 0x0004 /* generate GP IRQ on roll over */
-#define WDEV_NONE 0x0006 /* no event on roll over */
-#define WDEN 0x0FF0 /* enable watchdog */
-#define WDDIS 0x0AD0 /* disable watchdog */
-#define WDRO 0x8000 /* watchdog rolled over latch */
-
-/* depreciated WDOG_CTL Register Masks for legacy code */
-
-
-#define ICTL WDEV
-#define ENABLE_RESET WDEV_RESET
-#define WDOG_RESET WDEV_RESET
-#define ENABLE_NMI WDEV_NMI
-#define WDOG_NMI WDEV_NMI
-#define ENABLE_GPI WDEV_GPI
-#define WDOG_GPI WDEV_GPI
-#define DISABLE_EVT WDEV_NONE
-#define WDOG_NONE WDEV_NONE
-
-#define TMR_EN WDEN
-#define TMR_DIS WDDIS
-#define TRO WDRO
-#define ICTL_P0 0x01
- #define ICTL_P1 0x02
-#define TRO_P 0x0F
-
-
-
-/* *************** REAL TIME CLOCK MASKS **************************/
-/* RTC_STAT and RTC_ALARM Masks */
-#define RTC_SEC 0x0000003F /* Real-Time Clock Seconds */
-#define RTC_MIN 0x00000FC0 /* Real-Time Clock Minutes */
-#define RTC_HR 0x0001F000 /* Real-Time Clock Hours */
-#define RTC_DAY 0xFFFE0000 /* Real-Time Clock Days */
-
-/* RTC_ALARM Macro z=day y=hr x=min w=sec */
-#define SET_ALARM(z,y,x,w) ((((z)&0x7FFF)<<0x11)|(((y)&0x1F)<<0xC)|(((x)&0x3F)<<0x6)|((w)&0x3F))
-
-/* RTC_ICTL and RTC_ISTAT Masks */
-#define STOPWATCH 0x0001 /* Stopwatch Interrupt Enable */
-#define ALARM 0x0002 /* Alarm Interrupt Enable */
-#define SECOND 0x0004 /* Seconds (1 Hz) Interrupt Enable */
-#define MINUTE 0x0008 /* Minutes Interrupt Enable */
-#define HOUR 0x0010 /* Hours Interrupt Enable */
-#define DAY 0x0020 /* 24 Hours (Days) Interrupt Enable */
-#define DAY_ALARM 0x0040 /* Day Alarm (Day, Hour, Minute, Second) Interrupt Enable */
-#define WRITE_PENDING 0x4000 /* Write Pending Status */
-#define WRITE_COMPLETE 0x8000 /* Write Complete Interrupt Enable */
-
-/* RTC_FAST / RTC_PREN Mask */
-#define PREN 0x0001 /* Enable Prescaler, RTC Runs @1 Hz */
-
-
/* ************** UART CONTROLLER MASKS *************************/
/* UARTx_LCR Masks */
#define WLS(x) (((x)-5) & 0x03) /* Word Length Select */
@@ -1381,33 +1269,6 @@
/* ************************** DMA CONTROLLER MASKS ********************************/
-/* DMAx_CONFIG, MDMA_yy_CONFIG Masks */
-#define DMAEN 0x0001 /* DMA Channel Enable */
-#define WNR 0x0002 /* Channel Direction (W/R*) */
-#define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */
-#define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */
-#define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */
-#define DMA2D 0x0010 /* DMA Mode (2D/1D*) */
-#define RESTART 0x0020 /* DMA Buffer Clear */
-#define DI_SEL 0x0040 /* Data Interrupt Timing Select */
-#define DI_EN 0x0080 /* Data Interrupt Enable */
-#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */
-#define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */
-#define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */
-#define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */
-#define NDSIZE_4 0x0400 /* Next Descriptor Size = 4 */
-#define NDSIZE_5 0x0500 /* Next Descriptor Size = 5 */
-#define NDSIZE_6 0x0600 /* Next Descriptor Size = 6 */
-#define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */
-#define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */
-#define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */
-#define NDSIZE 0x0900 /* Next Descriptor Size */
-#define DMAFLOW 0x7000 /* Flow Control */
-#define DMAFLOW_STOP 0x0000 /* Stop Mode */
-#define DMAFLOW_AUTO 0x1000 /* Autobuffer Mode */
-#define DMAFLOW_ARRAY 0x4000 /* Descriptor Array Mode */
-#define DMAFLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */
-#define DMAFLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */
/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */
#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */
@@ -1425,13 +1286,6 @@
#define PMAP_UART1RX 0xA000 /* UART1 Port Receive DMA */
#define PMAP_UART1TX 0xB000 /* UART1 Port Transmit DMA */
-/* DMAx_IRQ_STATUS, MDMA_yy_IRQ_STATUS Masks */
-#define DMA_DONE 0x0001 /* DMA Completion Interrupt Status */
-#define DMA_ERR 0x0002 /* DMA Error Interrupt Status */
-#define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */
-#define DMA_RUN 0x0008 /* DMA Channel Running Indicator */
-
-
/* ************ PARALLEL PERIPHERAL INTERFACE (PPI) MASKS *************/
/* PPI_CONTROL Masks */
#define PORT_EN 0x0001 /* PPI Port Enable */
@@ -1843,46 +1697,6 @@
#define BNDMODE_CAPT 0x2000 /* boundary capture mode */
#define BNDMODE_AEXT 0x3000 /* boundary auto-extend mode */
-/* Bit masks for OTP_CONTROL */
-
-#define FUSE_FADDR 0x1ff /* OTP/Fuse Address */
-#define FIEN 0x800 /* OTP/Fuse Interrupt Enable */
-#define nFIEN 0x0
-#define FTESTDEC 0x1000 /* OTP/Fuse Test Decoder */
-#define nFTESTDEC 0x0
-#define FWRTEST 0x2000 /* OTP/Fuse Write Test */
-#define nFWRTEST 0x0
-#define FRDEN 0x4000 /* OTP/Fuse Read Enable */
-#define nFRDEN 0x0
-#define FWREN 0x8000 /* OTP/Fuse Write Enable */
-#define nFWREN 0x0
-
-/* Bit masks for OTP_BEN */
-
-#define FBEN 0xffff /* OTP/Fuse Byte Enable */
-
-/* Bit masks for OTP_STATUS */
-
-#define FCOMP 0x1 /* OTP/Fuse Access Complete */
-#define nFCOMP 0x0
-#define FERROR 0x2 /* OTP/Fuse Access Error */
-#define nFERROR 0x0
-#define MMRGLOAD 0x10 /* Memory Mapped Register Gasket Load */
-#define nMMRGLOAD 0x0
-#define MMRGLOCK 0x20 /* Memory Mapped Register Gasket Lock */
-#define nMMRGLOCK 0x0
-#define FPGMEN 0x40 /* OTP/Fuse Program Enable */
-#define nFPGMEN 0x0
-
-/* Bit masks for OTP_TIMING */
-
-#define USECDIV 0xff /* Micro Second Divider */
-#define READACC 0x7f00 /* Read Access Time */
-#define CPUMPRL 0x38000 /* Charge Pump Release Time */
-#define CPUMPSU 0xc0000 /* Charge Pump Setup Time */
-#define CPUMPHD 0xf00000 /* Charge Pump Hold Time */
-#define PGMTIME 0xff000000 /* Program Time */
-
/* Bit masks for SECURE_SYSSWT */
#define EMUDABL 0x1 /* Emulation Disable. */