diff options
Diffstat (limited to 'arch/arm/mach-at91/include/mach')
| -rw-r--r-- | arch/arm/mach-at91/include/mach/at91_pio.h | 80 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/at91_rtt.h | 35 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/cpu.h | 52 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/debug-macro.S | 46 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/memory.h | 26 | ||||
| -rw-r--r-- | arch/arm/mach-at91/include/mach/system_rev.h | 27 |
6 files changed, 14 insertions, 252 deletions
diff --git a/arch/arm/mach-at91/include/mach/at91_pio.h b/arch/arm/mach-at91/include/mach/at91_pio.h deleted file mode 100644 index 7b7366253ceb..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_pio.h +++ /dev/null @@ -1,80 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_pio.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Parallel I/O Controller (PIO) - System peripherals registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_PIO_H -#define AT91_PIO_H - -#define PIO_PER 0x00 /* Enable Register */ -#define PIO_PDR 0x04 /* Disable Register */ -#define PIO_PSR 0x08 /* Status Register */ -#define PIO_OER 0x10 /* Output Enable Register */ -#define PIO_ODR 0x14 /* Output Disable Register */ -#define PIO_OSR 0x18 /* Output Status Register */ -#define PIO_IFER 0x20 /* Glitch Input Filter Enable */ -#define PIO_IFDR 0x24 /* Glitch Input Filter Disable */ -#define PIO_IFSR 0x28 /* Glitch Input Filter Status */ -#define PIO_SODR 0x30 /* Set Output Data Register */ -#define PIO_CODR 0x34 /* Clear Output Data Register */ -#define PIO_ODSR 0x38 /* Output Data Status Register */ -#define PIO_PDSR 0x3c /* Pin Data Status Register */ -#define PIO_IER 0x40 /* Interrupt Enable Register */ -#define PIO_IDR 0x44 /* Interrupt Disable Register */ -#define PIO_IMR 0x48 /* Interrupt Mask Register */ -#define PIO_ISR 0x4c /* Interrupt Status Register */ -#define PIO_MDER 0x50 /* Multi-driver Enable Register */ -#define PIO_MDDR 0x54 /* Multi-driver Disable Register */ -#define PIO_MDSR 0x58 /* Multi-driver Status Register */ -#define PIO_PUDR 0x60 /* Pull-up Disable Register */ -#define PIO_PUER 0x64 /* Pull-up Enable Register */ -#define PIO_PUSR 0x68 /* Pull-up Status Register */ -#define PIO_ASR 0x70 /* Peripheral A Select Register */ -#define PIO_ABCDSR1 0x70 /* Peripheral ABCD Select Register 1 [some sam9 only] */ -#define PIO_BSR 0x74 /* Peripheral B Select Register */ -#define PIO_ABCDSR2 0x74 /* Peripheral ABCD Select Register 2 [some sam9 only] */ -#define PIO_ABSR 0x78 /* AB Status Register */ -#define PIO_IFSCDR 0x80 /* Input Filter Slow Clock Disable Register */ -#define PIO_IFSCER 0x84 /* Input Filter Slow Clock Enable Register */ -#define PIO_IFSCSR 0x88 /* Input Filter Slow Clock Status Register */ -#define PIO_SCDR 0x8c /* Slow Clock Divider Debouncing Register */ -#define PIO_SCDR_DIV (0x3fff << 0) /* Slow Clock Divider Mask */ -#define PIO_PPDDR 0x90 /* Pad Pull-down Disable Register */ -#define PIO_PPDER 0x94 /* Pad Pull-down Enable Register */ -#define PIO_PPDSR 0x98 /* Pad Pull-down Status Register */ -#define PIO_OWER 0xa0 /* Output Write Enable Register */ -#define PIO_OWDR 0xa4 /* Output Write Disable Register */ -#define PIO_OWSR 0xa8 /* Output Write Status Register */ -#define PIO_AIMER 0xb0 /* Additional Interrupt Modes Enable Register */ -#define PIO_AIMDR 0xb4 /* Additional Interrupt Modes Disable Register */ -#define PIO_AIMMR 0xb8 /* Additional Interrupt Modes Mask Register */ -#define PIO_ESR 0xc0 /* Edge Select Register */ -#define PIO_LSR 0xc4 /* Level Select Register */ -#define PIO_ELSR 0xc8 /* Edge/Level Status Register */ -#define PIO_FELLSR 0xd0 /* Falling Edge/Low Level Select Register */ -#define PIO_REHLSR 0xd4 /* Rising Edge/ High Level Select Register */ -#define PIO_FRLHSR 0xd8 /* Fall/Rise - Low/High Status Register */ -#define PIO_SCHMITT 0x100 /* Schmitt Trigger Register */ - -#define ABCDSR_PERIPH_A 0x0 -#define ABCDSR_PERIPH_B 0x1 -#define ABCDSR_PERIPH_C 0x2 -#define ABCDSR_PERIPH_D 0x3 - -#define SAMA5D3_PIO_DRIVER1 0x118 /*PIO Driver 1 register offset*/ -#define SAMA5D3_PIO_DRIVER2 0x11C /*PIO Driver 2 register offset*/ - -#define AT91SAM9X5_PIO_DRIVER1 0x114 /*PIO Driver 1 register offset*/ -#define AT91SAM9X5_PIO_DRIVER2 0x118 /*PIO Driver 2 register offset*/ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91_rtt.h b/arch/arm/mach-at91/include/mach/at91_rtt.h deleted file mode 100644 index 7ec75de8bbb6..000000000000 --- a/arch/arm/mach-at91/include/mach/at91_rtt.h +++ /dev/null @@ -1,35 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_rtt.h - * - * Copyright (C) 2007 Andrew Victor - * Copyright (C) 2007 Atmel Corporation. - * - * Real-time Timer (RTT) - System peripherals regsters. - * Based on AT91SAM9261 datasheet revision D. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_RTT_H -#define AT91_RTT_H - -#define AT91_RTT_MR 0x00 /* Real-time Mode Register */ -#define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */ -#define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */ -#define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */ -#define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */ - -#define AT91_RTT_AR 0x04 /* Real-time Alarm Register */ -#define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */ - -#define AT91_RTT_VR 0x08 /* Real-time Value Register */ -#define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */ - -#define AT91_RTT_SR 0x0c /* Real-time Status Register */ -#define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */ -#define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/cpu.h b/arch/arm/mach-at91/include/mach/cpu.h index 61914fb35f5d..ce7c80a44983 100644 --- a/arch/arm/mach-at91/include/mach/cpu.h +++ b/arch/arm/mach-at91/include/mach/cpu.h @@ -152,69 +152,45 @@ static inline int at91_soc_is_detected(void) #define cpu_is_at91rm9200_pqfp() (0) #endif -#ifdef CONFIG_SOC_AT91SAM9260 +#ifdef CONFIG_SOC_AT91SAM9 #define cpu_is_at91sam9xe() (at91_soc_initdata.subtype == AT91_SOC_SAM9XE) #define cpu_is_at91sam9260() (at91_soc_initdata.type == AT91_SOC_SAM9260) #define cpu_is_at91sam9g20() (at91_soc_initdata.type == AT91_SOC_SAM9G20) -#else -#define cpu_is_at91sam9xe() (0) -#define cpu_is_at91sam9260() (0) -#define cpu_is_at91sam9g20() (0) -#endif - -#ifdef CONFIG_SOC_AT91SAM9261 #define cpu_is_at91sam9261() (at91_soc_initdata.type == AT91_SOC_SAM9261) #define cpu_is_at91sam9g10() (at91_soc_initdata.type == AT91_SOC_SAM9G10) -#else -#define cpu_is_at91sam9261() (0) -#define cpu_is_at91sam9g10() (0) -#endif - -#ifdef CONFIG_SOC_AT91SAM9263 #define cpu_is_at91sam9263() (at91_soc_initdata.type == AT91_SOC_SAM9263) -#else -#define cpu_is_at91sam9263() (0) -#endif - -#ifdef CONFIG_SOC_AT91SAM9RL #define cpu_is_at91sam9rl() (at91_soc_initdata.type == AT91_SOC_SAM9RL) -#else -#define cpu_is_at91sam9rl() (0) -#endif - -#ifdef CONFIG_SOC_AT91SAM9G45 #define cpu_is_at91sam9g45() (at91_soc_initdata.type == AT91_SOC_SAM9G45) #define cpu_is_at91sam9g45es() (at91_soc_initdata.subtype == AT91_SOC_SAM9G45ES) #define cpu_is_at91sam9m10() (at91_soc_initdata.subtype == AT91_SOC_SAM9M10) #define cpu_is_at91sam9g46() (at91_soc_initdata.subtype == AT91_SOC_SAM9G46) #define cpu_is_at91sam9m11() (at91_soc_initdata.subtype == AT91_SOC_SAM9M11) -#else -#define cpu_is_at91sam9g45() (0) -#define cpu_is_at91sam9g45es() (0) -#define cpu_is_at91sam9m10() (0) -#define cpu_is_at91sam9g46() (0) -#define cpu_is_at91sam9m11() (0) -#endif - -#ifdef CONFIG_SOC_AT91SAM9X5 #define cpu_is_at91sam9x5() (at91_soc_initdata.type == AT91_SOC_SAM9X5) #define cpu_is_at91sam9g15() (at91_soc_initdata.subtype == AT91_SOC_SAM9G15) #define cpu_is_at91sam9g35() (at91_soc_initdata.subtype == AT91_SOC_SAM9G35) #define cpu_is_at91sam9x35() (at91_soc_initdata.subtype == AT91_SOC_SAM9X35) #define cpu_is_at91sam9g25() (at91_soc_initdata.subtype == AT91_SOC_SAM9G25) #define cpu_is_at91sam9x25() (at91_soc_initdata.subtype == AT91_SOC_SAM9X25) +#define cpu_is_at91sam9n12() (at91_soc_initdata.type == AT91_SOC_SAM9N12) #else +#define cpu_is_at91sam9xe() (0) +#define cpu_is_at91sam9260() (0) +#define cpu_is_at91sam9g20() (0) +#define cpu_is_at91sam9261() (0) +#define cpu_is_at91sam9g10() (0) +#define cpu_is_at91sam9263() (0) +#define cpu_is_at91sam9rl() (0) +#define cpu_is_at91sam9g45() (0) +#define cpu_is_at91sam9g45es() (0) +#define cpu_is_at91sam9m10() (0) +#define cpu_is_at91sam9g46() (0) +#define cpu_is_at91sam9m11() (0) #define cpu_is_at91sam9x5() (0) #define cpu_is_at91sam9g15() (0) #define cpu_is_at91sam9g35() (0) #define cpu_is_at91sam9x35() (0) #define cpu_is_at91sam9g25() (0) #define cpu_is_at91sam9x25() (0) -#endif - -#ifdef CONFIG_SOC_AT91SAM9N12 -#define cpu_is_at91sam9n12() (at91_soc_initdata.type == AT91_SOC_SAM9N12) -#else #define cpu_is_at91sam9n12() (0) #endif diff --git a/arch/arm/mach-at91/include/mach/debug-macro.S b/arch/arm/mach-at91/include/mach/debug-macro.S deleted file mode 100644 index 2103a90f2261..000000000000 --- a/arch/arm/mach-at91/include/mach/debug-macro.S +++ /dev/null @@ -1,46 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/debug-macro.S - * - * Copyright (C) 2003-2005 SAN People - * - * Debugging macro include header - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include <mach/hardware.h> -#include <mach/at91_dbgu.h> - -#if defined(CONFIG_AT91_DEBUG_LL_DBGU0) -#define AT91_DBGU AT91_BASE_DBGU0 -#elif defined(CONFIG_AT91_DEBUG_LL_DBGU1) -#define AT91_DBGU AT91_BASE_DBGU1 -#else -/* On sama5d4, use USART3 as low level serial console */ -#define AT91_DBGU SAMA5D4_BASE_USART3 -#endif - - .macro addruart, rp, rv, tmp - ldr \rp, =AT91_DBGU @ System peripherals (phys address) - ldr \rv, =AT91_IO_P2V(AT91_DBGU) @ System peripherals (virt address) - .endm - - .macro senduart,rd,rx - strb \rd, [\rx, #(AT91_DBGU_THR)] @ Write to Transmitter Holding Register - .endm - - .macro waituart,rd,rx -1001: ldr \rd, [\rx, #(AT91_DBGU_SR)] @ Read Status Register - tst \rd, #AT91_DBGU_TXRDY @ DBGU_TXRDY = 1 when ready to transmit - beq 1001b - .endm - - .macro busyuart,rd,rx -1001: ldr \rd, [\rx, #(AT91_DBGU_SR)] @ Read Status Register - tst \rd, #AT91_DBGU_TXEMPTY @ DBGU_TXEMPTY = 1 when transmission complete - beq 1001b - .endm - diff --git a/arch/arm/mach-at91/include/mach/memory.h b/arch/arm/mach-at91/include/mach/memory.h deleted file mode 100644 index 401c207f2f39..000000000000 --- a/arch/arm/mach-at91/include/mach/memory.h +++ /dev/null @@ -1,26 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/memory.h - * - * Copyright (C) 2004 SAN People - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#ifndef __ASM_ARCH_MEMORY_H -#define __ASM_ARCH_MEMORY_H - -#include <mach/hardware.h> - -#endif diff --git a/arch/arm/mach-at91/include/mach/system_rev.h b/arch/arm/mach-at91/include/mach/system_rev.h deleted file mode 100644 index ef79a9aafc08..000000000000 --- a/arch/arm/mach-at91/include/mach/system_rev.h +++ /dev/null @@ -1,27 +0,0 @@ -/* - * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> - * - * Under GPLv2 only - */ - -#ifndef __ARCH_SYSTEM_REV_H__ -#define __ARCH_SYSTEM_REV_H__ - -#include <asm/system_info.h> - -/* - * board revision encoding - * mach specific - * the 16-31 bit are reserved for at91 generic information - * - * bit 31: - * 0 => nand 8 bit - * 1 => nand 16 bit - */ -#define BOARD_HAVE_NAND_16BIT (1 << 31) -static inline int board_have_nand_16bit(void) -{ - return (system_rev & BOARD_HAVE_NAND_16BIT) ? 1 : 0; -} - -#endif /* __ARCH_SYSTEM_REV_H__ */ |