diff options
Diffstat (limited to 'arch/arm/Kconfig')
| -rw-r--r-- | arch/arm/Kconfig | 50 |
1 files changed, 33 insertions, 17 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 5098564d5879..93180845ae16 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -9,6 +9,7 @@ config ARM select SYS_SUPPORTS_APM_EMULATION select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI) select HAVE_OPROFILE if (HAVE_PERF_EVENTS) + select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL select HAVE_ARCH_KGDB select HAVE_KPROBES if !XIP_KERNEL select HAVE_KRETPROBES if (HAVE_KPROBES) @@ -21,6 +22,7 @@ config ARM select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZO select HAVE_KERNEL_LZMA + select HAVE_KERNEL_XZ select HAVE_IRQ_WORK select HAVE_PERF_EVENTS select PERF_USE_VMALLOC @@ -28,10 +30,10 @@ config ARM select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) select HAVE_C_RECORDMCOUNT select HAVE_GENERIC_HARDIRQS - select HAVE_SPARSE_IRQ select GENERIC_IRQ_SHOW select CPU_PM if (SUSPEND || CPU_IDLE) select GENERIC_PCI_IOMAP + select HAVE_BPF_JIT if NET help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -52,9 +54,6 @@ config MIGHT_HAVE_PCI config SYS_SUPPORTS_APM_EMULATION bool -config HAVE_SCHED_CLOCK - bool - config GENERIC_GPIO bool @@ -180,6 +179,9 @@ config ZONE_DMA config NEED_DMA_MAP_STATE def_bool y +config ARCH_HAS_DMA_SET_COHERENT_MASK + bool + config GENERIC_ISA_DMA bool @@ -217,6 +219,13 @@ config ARM_PATCH_PHYS_VIRT this feature (eg, building a kernel for a single machine) and you need to shrink the kernel to the minimal size. +config NEED_MACH_IO_H + bool + help + Select this when mach/io.h is required to provide special + definitions for this platform. The need for mach/io.h should + be avoided when possible. + config NEED_MACH_MEMORY_H bool help @@ -268,7 +277,9 @@ config ARCH_INTEGRATOR select GENERIC_CLOCKEVENTS select PLAT_VERSATILE select PLAT_VERSATILE_FPGA_IRQ + select NEED_MACH_IO_H select NEED_MACH_MEMORY_H + select SPARSE_IRQ help Support for ARM's Integrator platform. @@ -315,6 +326,7 @@ config ARCH_VEXPRESS select HAVE_CLK select HAVE_PATA_PLATFORM select ICST + select NO_IOPORT select PLAT_VERSATILE select PLAT_VERSATILE_CLCD help @@ -354,6 +366,7 @@ config ARCH_HIGHBANK select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU select HAVE_SMP + select SPARSE_IRQ select USE_OF help Support for the Calxeda Highbank SoC based boards. @@ -404,6 +417,7 @@ config ARCH_EBSA110 select ISA select NO_IOPORT select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_IO_H select NEED_MACH_MEMORY_H help This is an evaluation board for the StrongARM processor available @@ -430,6 +444,7 @@ config ARCH_FOOTBRIDGE select FOOTBRIDGE select GENERIC_CLOCKEVENTS select HAVE_IDE + select NEED_MACH_IO_H select NEED_MACH_MEMORY_H help Support for systems based on the DC21285 companion chip @@ -442,7 +457,6 @@ config ARCH_MXC select CLKDEV_LOOKUP select CLKSRC_MMIO select GENERIC_IRQ_CHIP - select HAVE_SCHED_CLOCK select MULTI_IRQ_HANDLER help Support for Freescale MXC/iMX-based family of processors @@ -482,6 +496,7 @@ config ARCH_IOP13XX select PCI select ARCH_SUPPORTS_MSI select VMSPLIT_1G + select NEED_MACH_IO_H select NEED_MACH_MEMORY_H select NEED_RET_TO_USER help @@ -491,6 +506,7 @@ config ARCH_IOP32X bool "IOP32x-based" depends on MMU select CPU_XSCALE + select NEED_MACH_IO_H select NEED_RET_TO_USER select PLAT_IOP select PCI @@ -503,6 +519,7 @@ config ARCH_IOP33X bool "IOP33x-based" depends on MMU select CPU_XSCALE + select NEED_MACH_IO_H select NEED_RET_TO_USER select PLAT_IOP select PCI @@ -516,6 +533,7 @@ config ARCH_IXP23XX select CPU_XSC3 select PCI select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_IO_H select NEED_MACH_MEMORY_H help Support for Intel's IXP23xx (XScale) family of processors. @@ -526,6 +544,7 @@ config ARCH_IXP2000 select CPU_XSCALE select PCI select ARCH_USES_GETTIMEOFFSET + select NEED_MACH_IO_H select NEED_MACH_MEMORY_H help Support for Intel's IXP2400/2800 (XScale) family of processors. @@ -533,12 +552,13 @@ config ARCH_IXP2000 config ARCH_IXP4XX bool "IXP4xx-based" depends on MMU + select ARCH_HAS_DMA_SET_COHERENT_MASK select CLKSRC_MMIO select CPU_XSCALE select GENERIC_GPIO select GENERIC_CLOCKEVENTS - select HAVE_SCHED_CLOCK select MIGHT_HAVE_PCI + select NEED_MACH_IO_H select DMABOUNCE if PCI help Support for Intel's IXP4XX (XScale) family of processors. @@ -549,6 +569,7 @@ config ARCH_DOVE select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS + select NEED_MACH_IO_H select PLAT_ORION help Support for the Marvell Dove SoC 88AP510 @@ -559,6 +580,7 @@ config ARCH_KIRKWOOD select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS + select NEED_MACH_IO_H select PLAT_ORION help Support for the following Marvell Kirkwood series SoCs: @@ -583,6 +605,7 @@ config ARCH_MV78XX0 select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS + select NEED_MACH_IO_H select PLAT_ORION help Support for the following Marvell MV78xx0 series SoCs: @@ -608,7 +631,6 @@ config ARCH_MMP select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS select GPIO_PXA - select HAVE_SCHED_CLOCK select TICK_ONESHOT select PLAT_PXA select SPARSE_IRQ @@ -649,9 +671,9 @@ config ARCH_TEGRA select GENERIC_CLOCKEVENTS select GENERIC_GPIO select HAVE_CLK - select HAVE_SCHED_CLOCK select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 + select NEED_MACH_IO_H if PCI select ARCH_HAS_CPUFREQ help This enables support for NVIDIA Tegra based systems (Tegra APX, @@ -666,7 +688,6 @@ config ARCH_PICOXCELL select DW_APB_TIMER select GENERIC_CLOCKEVENTS select GENERIC_GPIO - select HAVE_SCHED_CLOCK select HAVE_TCM select NO_IOPORT select SPARSE_IRQ @@ -694,7 +715,6 @@ config ARCH_PXA select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS select GPIO_PXA - select HAVE_SCHED_CLOCK select TICK_ONESHOT select PLAT_PXA select SPARSE_IRQ @@ -745,6 +765,7 @@ config ARCH_RPC select ARCH_SPARSEMEM_ENABLE select ARCH_USES_GETTIMEOFFSET select HAVE_IDE + select NEED_MACH_IO_H select NEED_MACH_MEMORY_H help On the Acorn Risc-PC, Linux can support the internal IDE disk and @@ -761,7 +782,6 @@ config ARCH_SA1100 select CPU_FREQ select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP - select HAVE_SCHED_CLOCK select TICK_ONESHOT select ARCH_REQUIRE_GPIOLIB select HAVE_IDE @@ -780,6 +800,7 @@ config ARCH_S3C24XX select HAVE_S3C2410_I2C if I2C select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_WATCHDOG if WATCHDOG + select NEED_MACH_IO_H help Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 and S3C2450 SoCs based systems, such as the Simtec Electronics BAST @@ -818,7 +839,6 @@ config ARCH_S5P64X0 select CLKSRC_MMIO select HAVE_S3C2410_WATCHDOG if WATCHDOG select GENERIC_CLOCKEVENTS - select HAVE_SCHED_CLOCK select HAVE_S3C2410_I2C if I2C select HAVE_S3C_RTC if RTC_CLASS help @@ -849,7 +869,6 @@ config ARCH_S5PV210 select CLKSRC_MMIO select ARCH_HAS_CPUFREQ select GENERIC_CLOCKEVENTS - select HAVE_SCHED_CLOCK select HAVE_S3C2410_I2C if I2C select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_WATCHDOG if WATCHDOG @@ -883,6 +902,7 @@ config ARCH_SHARK select PCI select ARCH_USES_GETTIMEOFFSET select NEED_MACH_MEMORY_H + select NEED_MACH_IO_H help Support for the StrongARM based Digital DNARD machine, also known as "Shark" (<http://www.shark-linux.de/shark.html>). @@ -892,7 +912,6 @@ config ARCH_U300 depends on MMU select CLKSRC_MMIO select CPU_ARM926T - select HAVE_SCHED_CLOCK select HAVE_TCM select ARM_AMBA select ARM_PATCH_PHYS_VIRT @@ -951,7 +970,6 @@ config ARCH_OMAP select ARCH_HAS_CPUFREQ select CLKSRC_MMIO select GENERIC_CLOCKEVENTS - select HAVE_SCHED_CLOCK select ARCH_HAS_HOLES_MEMORYMODEL help Support for TI's OMAP platform (OMAP1/2/3/4). @@ -1115,13 +1133,11 @@ config ARCH_ACORN config PLAT_IOP bool select GENERIC_CLOCKEVENTS - select HAVE_SCHED_CLOCK config PLAT_ORION bool select CLKSRC_MMIO select GENERIC_IRQ_CHIP - select HAVE_SCHED_CLOCK config PLAT_PXA bool |