summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/clock
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/clock')
-rw-r--r--Documentation/devicetree/bindings/clock/alphascale,acc.txt115
-rw-r--r--Documentation/devicetree/bindings/clock/exynos7-clock.txt15
-rw-r--r--Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt10
-rw-r--r--Documentation/devicetree/bindings/clock/qcom,lcc.txt21
-rw-r--r--Documentation/devicetree/bindings/clock/qoriq-clock.txt5
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt1
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,r8a73a4-cpg-clocks.txt33
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt12
-rw-r--r--Documentation/devicetree/bindings/clock/renesas,sh73a0-cpg-clocks.txt35
-rw-r--r--Documentation/devicetree/bindings/clock/sunxi.txt43
-rw-r--r--Documentation/devicetree/bindings/clock/ti,cdce706.txt42
-rw-r--r--Documentation/devicetree/bindings/clock/ti/fapll.txt33
12 files changed, 348 insertions, 17 deletions
diff --git a/Documentation/devicetree/bindings/clock/alphascale,acc.txt b/Documentation/devicetree/bindings/clock/alphascale,acc.txt
new file mode 100644
index 000000000000..62e67e883e76
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/alphascale,acc.txt
@@ -0,0 +1,115 @@
+Alphascale Clock Controller
+
+The ACC (Alphascale Clock Controller) is responsible of choising proper
+clock source, setting deviders and clock gates.
+
+Required properties for the ACC node:
+ - compatible: must be "alphascale,asm9260-clock-controller"
+ - reg: must contain the ACC register base and size
+ - #clock-cells : shall be set to 1.
+
+Simple one-cell clock specifier format is used, where the only cell is used
+as an index of the clock inside the provider.
+It is encouraged to use dt-binding for clock index definitions. SoC specific
+dt-binding should be included to the device tree descriptor. For example
+Alphascale ASM9260:
+#include <dt-bindings/clock/alphascale,asm9260.h>
+
+This binding contains two types of clock providers:
+ _AHB_ - AHB gate;
+ _SYS_ - adjustable clock source. Not all peripheral have _SYS_ clock provider.
+All clock specific details can be found in the SoC documentation.
+CLKID_AHB_ROM 0
+CLKID_AHB_RAM 1
+CLKID_AHB_GPIO 2
+CLKID_AHB_MAC 3
+CLKID_AHB_EMI 4
+CLKID_AHB_USB0 5
+CLKID_AHB_USB1 6
+CLKID_AHB_DMA0 7
+CLKID_AHB_DMA1 8
+CLKID_AHB_UART0 9
+CLKID_AHB_UART1 10
+CLKID_AHB_UART2 11
+CLKID_AHB_UART3 12
+CLKID_AHB_UART4 13
+CLKID_AHB_UART5 14
+CLKID_AHB_UART6 15
+CLKID_AHB_UART7 16
+CLKID_AHB_UART8 17
+CLKID_AHB_UART9 18
+CLKID_AHB_I2S0 19
+CLKID_AHB_I2C0 20
+CLKID_AHB_I2C1 21
+CLKID_AHB_SSP0 22
+CLKID_AHB_IOCONFIG 23
+CLKID_AHB_WDT 24
+CLKID_AHB_CAN0 25
+CLKID_AHB_CAN1 26
+CLKID_AHB_MPWM 27
+CLKID_AHB_SPI0 28
+CLKID_AHB_SPI1 29
+CLKID_AHB_QEI 30
+CLKID_AHB_QUADSPI0 31
+CLKID_AHB_CAMIF 32
+CLKID_AHB_LCDIF 33
+CLKID_AHB_TIMER0 34
+CLKID_AHB_TIMER1 35
+CLKID_AHB_TIMER2 36
+CLKID_AHB_TIMER3 37
+CLKID_AHB_IRQ 38
+CLKID_AHB_RTC 39
+CLKID_AHB_NAND 40
+CLKID_AHB_ADC0 41
+CLKID_AHB_LED 42
+CLKID_AHB_DAC0 43
+CLKID_AHB_LCD 44
+CLKID_AHB_I2S1 45
+CLKID_AHB_MAC1 46
+
+CLKID_SYS_CPU 47
+CLKID_SYS_AHB 48
+CLKID_SYS_I2S0M 49
+CLKID_SYS_I2S0S 50
+CLKID_SYS_I2S1M 51
+CLKID_SYS_I2S1S 52
+CLKID_SYS_UART0 53
+CLKID_SYS_UART1 54
+CLKID_SYS_UART2 55
+CLKID_SYS_UART3 56
+CLKID_SYS_UART4 56
+CLKID_SYS_UART5 57
+CLKID_SYS_UART6 58
+CLKID_SYS_UART7 59
+CLKID_SYS_UART8 60
+CLKID_SYS_UART9 61
+CLKID_SYS_SPI0 62
+CLKID_SYS_SPI1 63
+CLKID_SYS_QUADSPI 64
+CLKID_SYS_SSP0 65
+CLKID_SYS_NAND 66
+CLKID_SYS_TRACE 67
+CLKID_SYS_CAMM 68
+CLKID_SYS_WDT 69
+CLKID_SYS_CLKOUT 70
+CLKID_SYS_MAC 71
+CLKID_SYS_LCD 72
+CLKID_SYS_ADCANA 73
+
+Example of clock consumer with _SYS_ and _AHB_ sinks.
+uart4: serial@80010000 {
+ compatible = "alphascale,asm9260-uart";
+ reg = <0x80010000 0x4000>;
+ clocks = <&acc CLKID_SYS_UART4>, <&acc CLKID_AHB_UART4>;
+ interrupts = <19>;
+ status = "disabled";
+};
+
+Clock consumer with only one, _AHB_ sink.
+timer0: timer@80088000 {
+ compatible = "alphascale,asm9260-timer";
+ reg = <0x80088000 0x4000>;
+ clocks = <&acc CLKID_AHB_TIMER0>;
+ interrupts = <29>;
+};
+
diff --git a/Documentation/devicetree/bindings/clock/exynos7-clock.txt b/Documentation/devicetree/bindings/clock/exynos7-clock.txt
index 6d3d5f80c1c3..6bf1e7493f61 100644
--- a/Documentation/devicetree/bindings/clock/exynos7-clock.txt
+++ b/Documentation/devicetree/bindings/clock/exynos7-clock.txt
@@ -34,6 +34,8 @@ Required Properties for Clock Controller:
- "samsung,exynos7-clock-peris"
- "samsung,exynos7-clock-fsys0"
- "samsung,exynos7-clock-fsys1"
+ - "samsung,exynos7-clock-mscl"
+ - "samsung,exynos7-clock-aud"
- reg: physical base address of the controller and the length of
memory mapped region.
@@ -53,6 +55,7 @@ Input clocks for top0 clock controller:
- dout_sclk_bus1_pll
- dout_sclk_cc_pll
- dout_sclk_mfc_pll
+ - dout_sclk_aud_pll
Input clocks for top1 clock controller:
- fin_pll
@@ -76,6 +79,14 @@ Input clocks for peric1 clock controller:
- sclk_uart1
- sclk_uart2
- sclk_uart3
+ - sclk_spi0
+ - sclk_spi1
+ - sclk_spi2
+ - sclk_spi3
+ - sclk_spi4
+ - sclk_i2s1
+ - sclk_pcm1
+ - sclk_spdif
Input clocks for peris clock controller:
- fin_pll
@@ -91,3 +102,7 @@ Input clocks for fsys1 clock controller:
- dout_aclk_fsys1_200
- dout_sclk_mmc0
- dout_sclk_mmc1
+
+Input clocks for aud clock controller:
+ - fin_pll
+ - fout_aud_pll
diff --git a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
index ded5d6212c84..c6620bc96703 100644
--- a/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
+++ b/Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt
@@ -1,4 +1,4 @@
-NVIDIA Tegra124 Clock And Reset Controller
+NVIDIA Tegra124 and Tegra132 Clock And Reset Controller
This binding uses the common clock binding:
Documentation/devicetree/bindings/clock/clock-bindings.txt
@@ -7,14 +7,16 @@ The CAR (Clock And Reset) Controller on Tegra is the HW module responsible
for muxing and gating Tegra's clocks, and setting their rates.
Required properties :
-- compatible : Should be "nvidia,tegra124-car"
+- compatible : Should be "nvidia,tegra124-car" or "nvidia,tegra132-car"
- reg : Should contain CAR registers location and length
- clocks : Should contain phandle and clock specifiers for two clocks:
the 32 KHz "32k_in", and the board-specific oscillator "osc".
- #clock-cells : Should be 1.
In clock consumers, this cell represents the clock ID exposed by the
- CAR. The assignments may be found in header file
- <dt-bindings/clock/tegra124-car.h>.
+ CAR. The assignments may be found in the header files
+ <dt-bindings/clock/tegra124-car-common.h> (which covers IDs common
+ to Tegra124 and Tegra132) and <dt-bindings/clock/tegra124-car.h>
+ (for Tegra124-specific clocks).
- #reset-cells : Should be 1.
In clock consumers, this cell represents the bit number in the CAR's
array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
diff --git a/Documentation/devicetree/bindings/clock/qcom,lcc.txt b/Documentation/devicetree/bindings/clock/qcom,lcc.txt
new file mode 100644
index 000000000000..dd755be63a01
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,lcc.txt
@@ -0,0 +1,21 @@
+Qualcomm LPASS Clock & Reset Controller Binding
+------------------------------------------------
+
+Required properties :
+- compatible : shall contain only one of the following:
+
+ "qcom,lcc-msm8960"
+ "qcom,lcc-apq8064"
+ "qcom,lcc-ipq8064"
+
+- reg : shall contain base register location and length
+- #clock-cells : shall contain 1
+- #reset-cells : shall contain 1
+
+Example:
+ clock-controller@28000000 {
+ compatible = "qcom,lcc-ipq8064";
+ reg = <0x28000000 0x1000>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/qoriq-clock.txt b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
index 266ff9d23229..df4a259a6898 100644
--- a/Documentation/devicetree/bindings/clock/qoriq-clock.txt
+++ b/Documentation/devicetree/bindings/clock/qoriq-clock.txt
@@ -1,6 +1,6 @@
-* Clock Block on Freescale CoreNet Platforms
+* Clock Block on Freescale QorIQ Platforms
-Freescale CoreNet chips take primary clocking input from the external
+Freescale qoriq chips take primary clocking input from the external
SYSCLK signal. The SYSCLK input (frequency) is multiplied using
multiple phase locked loops (PLL) to create a variety of frequencies
which can then be passed to a variety of internal logic, including
@@ -29,6 +29,7 @@ Required properties:
* "fsl,t4240-clockgen"
* "fsl,b4420-clockgen"
* "fsl,b4860-clockgen"
+ * "fsl,ls1021a-clockgen"
Chassis clock strings include:
* "fsl,qoriq-clockgen-1.0": for chassis 1.0 clocks
* "fsl,qoriq-clockgen-2.0": for chassis 2.0 clocks
diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
index 2e18676bd4b5..0a80fa70ca26 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt
@@ -11,6 +11,7 @@ Required Properties:
- compatible: Must be one of the following
- "renesas,r7s72100-mstp-clocks" for R7S72100 (RZ) MSTP gate clocks
+ - "renesas,r8a73a4-mstp-clocks" for R8A73A4 (R-Mobile APE6) MSTP gate clocks
- "renesas,r8a7740-mstp-clocks" for R8A7740 (R-Mobile A1) MSTP gate clocks
- "renesas,r8a7779-mstp-clocks" for R8A7779 (R-Car H1) MSTP gate clocks
- "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks
diff --git a/Documentation/devicetree/bindings/clock/renesas,r8a73a4-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,r8a73a4-cpg-clocks.txt
new file mode 100644
index 000000000000..ece92393e80d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,r8a73a4-cpg-clocks.txt
@@ -0,0 +1,33 @@
+* Renesas R8A73A4 Clock Pulse Generator (CPG)
+
+The CPG generates core clocks for the R8A73A4 SoC. It includes five PLLs
+and several fixed ratio dividers.
+
+Required Properties:
+
+ - compatible: Must be "renesas,r8a73a4-cpg-clocks"
+
+ - reg: Base address and length of the memory resource used by the CPG
+
+ - clocks: Reference to the parent clocks ("extal1" and "extal2")
+
+ - #clock-cells: Must be 1
+
+ - clock-output-names: The names of the clocks. Supported clocks are "main",
+ "pll0", "pll1", "pll2", "pll2s", "pll2h", "z", "z2", "i", "m3", "b",
+ "m1", "m2", "zx", "zs", and "hp".
+
+
+Example
+-------
+
+ cpg_clocks: cpg_clocks@e6150000 {
+ compatible = "renesas,r8a73a4-cpg-clocks";
+ reg = <0 0xe6150000 0 0x10000>;
+ clocks = <&extal1_clk>, <&extal2_clk>;
+ #clock-cells = <1>;
+ clock-output-names = "main", "pll0", "pll1", "pll2",
+ "pll2s", "pll2h", "z", "z2",
+ "i", "m3", "b", "m1", "m2",
+ "zx", "zs", "hp";
+ };
diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
index e6ad35b894f9..b02944fba9de 100644
--- a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt
@@ -8,15 +8,18 @@ Required Properties:
- compatible: Must be one of
- "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG
- "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG
+ - "renesas,r8a7793-cpg-clocks" for the r8a7793 CPG
- "renesas,r8a7794-cpg-clocks" for the r8a7794 CPG
- "renesas,rcar-gen2-cpg-clocks" for the generic R-Car Gen2 CPG
- reg: Base address and length of the memory resource used by the CPG
- - clocks: Reference to the parent clock
+ - clocks: References to the parent clocks: first to the EXTAL clock, second
+ to the USB_EXTAL clock
- #clock-cells: Must be 1
- clock-output-names: The names of the clocks. Supported clocks are "main",
- "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1" and "z"
+ "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1", "z", "rcan", and
+ "adsp"
Example
@@ -26,8 +29,9 @@ Example
compatible = "renesas,r8a7790-cpg-clocks",
"renesas,rcar-gen2-cpg-clocks";
reg = <0 0xe6150000 0 0x1000>;
- clocks = <&extal_clk>;
+ clocks = <&extal_clk &usb_extal_clk>;
#clock-cells = <1>;
clock-output-names = "main", "pll0, "pll1", "pll3",
- "lb", "qspi", "sdh", "sd0", "sd1", "z";
+ "lb", "qspi", "sdh", "sd0", "sd1", "z",
+ "rcan", "adsp";
};
diff --git a/Documentation/devicetree/bindings/clock/renesas,sh73a0-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,sh73a0-cpg-clocks.txt
new file mode 100644
index 000000000000..a8978ec94831
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/renesas,sh73a0-cpg-clocks.txt
@@ -0,0 +1,35 @@
+These bindings should be considered EXPERIMENTAL for now.
+
+* Renesas SH73A0 Clock Pulse Generator (CPG)
+
+The CPG generates core clocks for the SH73A0 SoC. It includes four PLLs
+and several fixed ratio dividers.
+
+Required Properties:
+
+ - compatible: Must be "renesas,sh73a0-cpg-clocks"
+
+ - reg: Base address and length of the memory resource used by the CPG
+
+ - clocks: Reference to the parent clocks ("extal1" and "extal2")
+
+ - #clock-cells: Must be 1
+
+ - clock-output-names: The names of the clocks. Supported clocks are "main",
+ "pll0", "pll1", "pll2", "pll3", "dsi0phy", "dsi1phy", "zg", "m3", "b",
+ "m1", "m2", "z", "zx", and "hp".
+
+
+Example
+-------
+
+ cpg_clocks: cpg_clocks@e6150000 {
+ compatible = "renesas,sh73a0-cpg-clocks";
+ reg = <0 0xe6150000 0 0x10000>;
+ clocks = <&extal1_clk>, <&extal2_clk>;
+ #clock-cells = <1>;
+ clock-output-names = "main", "pll0", "pll1", "pll2",
+ "pll3", "dsi0phy", "dsi1phy",
+ "zg", "m3", "b", "m1", "m2",
+ "z", "zx", "hp";
+ };
diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
index 67b2b99f2b33..60b44285250d 100644
--- a/Documentation/devicetree/bindings/clock/sunxi.txt
+++ b/Documentation/devicetree/bindings/clock/sunxi.txt
@@ -26,7 +26,7 @@ Required properties:
"allwinner,sun5i-a10s-ahb-gates-clk" - for the AHB gates on A10s
"allwinner,sun7i-a20-ahb-gates-clk" - for the AHB gates on A20
"allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31
- "allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
+ "allwinner,sun6i-a31-ahb1-clk" - for the AHB1 clock on A31
"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
"allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23
"allwinner,sun9i-a80-ahb0-gates-clk" - for the AHB0 gates on A80
@@ -55,9 +55,11 @@ Required properties:
"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
"allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
"allwinner,sun5i-a13-mbus-clk" - for the MBUS clock on A13
- "allwinner,sun4i-a10-mmc-output-clk" - for the MMC output clock on A10
- "allwinner,sun4i-a10-mmc-sample-clk" - for the MMC sample clock on A10
+ "allwinner,sun4i-a10-mmc-clk" - for the MMC clock
+ "allwinner,sun9i-a80-mmc-clk" - for mmc module clocks on A80
+ "allwinner,sun9i-a80-mmc-config-clk" - for mmc gates + resets on A80
"allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks
+ "allwinner,sun9i-a80-mod0-clk" - for module 0 (storage) clocks on A80
"allwinner,sun8i-a23-mbus-clk" - for the MBUS clock on A23
"allwinner,sun7i-a20-out-clk" - for the external output clocks
"allwinner,sun7i-a20-gmac-clk" - for the GMAC clock module on A20/A31
@@ -73,7 +75,9 @@ Required properties for all clocks:
- #clock-cells : from common clock binding; shall be set to 0 except for
the following compatibles where it shall be set to 1:
"allwinner,*-gates-clk", "allwinner,sun4i-pll5-clk",
- "allwinner,sun4i-pll6-clk", "allwinner,sun6i-a31-pll6-clk"
+ "allwinner,sun4i-pll6-clk", "allwinner,sun6i-a31-pll6-clk",
+ "allwinner,*-usb-clk", "allwinner,*-mmc-clk",
+ "allwinner,*-mmc-config-clk"
- clock-output-names : shall be the corresponding names of the outputs.
If the clock module only has one output, the name shall be the
module name.
@@ -81,6 +85,10 @@ Required properties for all clocks:
And "allwinner,*-usb-clk" clocks also require:
- reset-cells : shall be set to 1
+The "allwinner,sun9i-a80-mmc-config-clk" clock also requires:
+- #reset-cells : shall be set to 1
+- resets : shall be the reset control phandle for the mmc block.
+
For "allwinner,sun7i-a20-gmac-clk", the parent clocks shall be fixed rate
dummy clocks at 25 MHz and 125 MHz, respectively. See example.
@@ -95,6 +103,14 @@ For "allwinner,sun6i-a31-pll6-clk", there are 2 outputs. The first output
is the normal PLL6 output, or "pll6". The second output is rate doubled
PLL6, or "pll6x2".
+The "allwinner,*-mmc-clk" clocks have three different outputs: the
+main clock, with the ID 0, and the output and sample clocks, with the
+IDs 1 and 2, respectively.
+
+The "allwinner,sun9i-a80-mmc-config-clk" clock has one clock/reset output
+per mmc controller. The number of outputs is determined by the size of
+the address block, which is related to the overall mmc block.
+
For example:
osc24M: clk@01c20050 {
@@ -138,11 +154,11 @@ cpu: cpu@01c20054 {
};
mmc0_clk: clk@01c20088 {
- #clock-cells = <0>;
- compatible = "allwinner,sun4i-mod0-clk";
+ #clock-cells = <1>;
+ compatible = "allwinner,sun4i-a10-mmc-clk";
reg = <0x01c20088 0x4>;
clocks = <&osc24M>, <&pll6 1>, <&pll5 1>;
- clock-output-names = "mmc0";
+ clock-output-names = "mmc0", "mmc0_output", "mmc0_sample";
};
mii_phy_tx_clk: clk@2 {
@@ -170,3 +186,16 @@ gmac_clk: clk@01c20164 {
clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>;
clock-output-names = "gmac";
};
+
+mmc_config_clk: clk@01c13000 {
+ compatible = "allwinner,sun9i-a80-mmc-config-clk";
+ reg = <0x01c13000 0x10>;
+ clocks = <&ahb0_gates 8>;
+ clock-names = "ahb";
+ resets = <&ahb0_resets 8>;
+ reset-names = "ahb";
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ clock-output-names = "mmc0_config", "mmc1_config",
+ "mmc2_config", "mmc3_config";
+};
diff --git a/Documentation/devicetree/bindings/clock/ti,cdce706.txt b/Documentation/devicetree/bindings/clock/ti,cdce706.txt
new file mode 100644
index 000000000000..616836e7e1e2
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti,cdce706.txt
@@ -0,0 +1,42 @@
+Bindings for Texas Instruments CDCE706 programmable 3-PLL clock
+synthesizer/multiplier/divider.
+
+Reference: http://www.ti.com/lit/ds/symlink/cdce706.pdf
+
+I2C device node required properties:
+- compatible: shall be "ti,cdce706".
+- reg: i2c device address, shall be in range [0x68...0x6b].
+- #clock-cells: from common clock binding; shall be set to 1.
+- clocks: from common clock binding; list of parent clock
+ handles, shall be reference clock(s) connected to CLK_IN0
+ and CLK_IN1 pins.
+- clock-names: shall be clk_in0 and/or clk_in1. Use clk_in0
+ in case of crystal oscillator or differential signal input
+ configuration. Use clk_in0 and clk_in1 in case of independent
+ single-ended LVCMOS inputs configuration.
+
+Example:
+
+ clocks {
+ clk54: clk54 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <54000000>;
+ };
+ };
+ ...
+ i2c0: i2c-master@0d090000 {
+ ...
+ cdce706: clock-synth@69 {
+ compatible = "ti,cdce706";
+ #clock-cells = <1>;
+ reg = <0x69>;
+ clocks = <&clk54>;
+ clock-names = "clk_in0";
+ };
+ };
+ ...
+ simple-audio-card,codec {
+ ...
+ clocks = <&cdce706 4>;
+ };
diff --git a/Documentation/devicetree/bindings/clock/ti/fapll.txt b/Documentation/devicetree/bindings/clock/ti/fapll.txt
new file mode 100644
index 000000000000..c19b3f253b8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/ti/fapll.txt
@@ -0,0 +1,33 @@
+Binding for Texas Instruments FAPLL clock.
+
+Binding status: Unstable - ABI compatibility may be broken in the future
+
+This binding uses the common clock binding[1]. It assumes a
+register-mapped FAPLL with usually two selectable input clocks
+(reference clock and bypass clock), and one or more child
+syntesizers.
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be "ti,dm816-fapll-clock"
+- #clock-cells : from common clock binding; shall be set to 0.
+- clocks : link phandles of parent clocks (clk-ref and clk-bypass)
+- reg : address and length of the register set for controlling the FAPLL.
+
+Examples:
+ main_fapll: main_fapll {
+ #clock-cells = <1>;
+ compatible = "ti,dm816-fapll-clock";
+ reg = <0x400 0x40>;
+ clocks = <&sys_clkin_ck &sys_clkin_ck>;
+ clock-indices = <1>, <2>, <3>, <4>, <5>,
+ <6>, <7>;
+ clock-output-names = "main_pll_clk1",
+ "main_pll_clk2",
+ "main_pll_clk3",
+ "main_pll_clk4",
+ "main_pll_clk5",
+ "main_pll_clk6",
+ "main_pll_clk7";
+ };