diff options
813 files changed, 73968 insertions, 11947 deletions
@@ -598,6 +598,11 @@ S: Tamsui town, Taipei county, S: Taiwan 251 S: Republic of China +N: Reinette Chatre +E: reinette.chatre@intel.com +D: WiMedia Link Protocol implementation +D: UWB stack bits and pieces + N: Michael Elizabeth Chastain E: mec@shout.net D: Configure, Menuconfig, xconfig @@ -2695,6 +2700,12 @@ S: Demonstratsii 8-382 S: Tula 300000 S: Russia +N: Inaky Perez-Gonzalez +E: inaky.perez-gonzalez@intel.com +D: UWB stack, HWA-RC driver and HWA-HC drivers +D: Wireless USB additions to the USB stack +D: WiMedia Link Protocol bits and pieces + N: Gordon Peters E: GordPeters@smarttech.com D: Isochronous receive for IEEE 1394 driver (OHCI module). diff --git a/Documentation/ABI/testing/sysfs-bus-umc b/Documentation/ABI/testing/sysfs-bus-umc new file mode 100644 index 000000000000..948fec412446 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-umc @@ -0,0 +1,28 @@ +What: /sys/bus/umc/ +Date: July 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + The Wireless Host Controller Interface (WHCI) + specification describes a PCI-based device with + multiple capabilities; the UWB Multi-interface + Controller (UMC). + + The umc bus presents each of the individual + capabilties as a device. + +What: /sys/bus/umc/devices/.../capability_id +Date: July 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + The ID of this capability, with 0 being the radio + controller capability. + +What: /sys/bus/umc/devices/.../version +Date: July 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + The specification version this capability's hardware + interface complies with. diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index df6c8a0159f1..7772928ee48f 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -101,3 +101,46 @@ Description: Users: USB PM tool git://git.moblin.org/users/sarah/usb-pm-tool/ + +What: /sys/bus/usb/device/.../authorized +Date: July 2008 +KernelVersion: 2.6.26 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + Authorized devices are available for use by device + drivers, non-authorized one are not. By default, wired + USB devices are authorized. + + Certified Wireless USB devices are not authorized + initially and should be (by writing 1) after the + device has been authenticated. + +What: /sys/bus/usb/device/.../wusb_cdid +Date: July 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + For Certified Wireless USB devices only. + + A devices's CDID, as 16 space-separated hex octets. + +What: /sys/bus/usb/device/.../wusb_ck +Date: July 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + For Certified Wireless USB devices only. + + Write the device's connection key (CK) to start the + authentication of the device. The CK is 16 + space-separated hex octets. + +What: /sys/bus/usb/device/.../wusb_disconnect +Date: July 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + For Certified Wireless USB devices only. + + Write a 1 to force the device to disconnect + (equivalent to unplugging a wired USB device). diff --git a/Documentation/ABI/testing/sysfs-class-usb_host b/Documentation/ABI/testing/sysfs-class-usb_host new file mode 100644 index 000000000000..46b66ad1f1b4 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-usb_host @@ -0,0 +1,25 @@ +What: /sys/class/usb_host/usb_hostN/wusb_chid +Date: July 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + Write the CHID (16 space-separated hex octets) for this host controller. + This starts the host controller, allowing it to accept connection from + WUSB devices. + + Set an all zero CHID to stop the host controller. + +What: /sys/class/usb_host/usb_hostN/wusb_trust_timeout +Date: July 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + Devices that haven't sent a WUSB packet to the host + within 'wusb_trust_timeout' ms are considered to have + disconnected and are removed. The default value of + 4000 ms is the value required by the WUSB + specification. + + Since this relates to security (specifically, the + lifetime of PTKs and GTKs) it should not be changed + from the default. diff --git a/Documentation/ABI/testing/sysfs-class-uwb_rc b/Documentation/ABI/testing/sysfs-class-uwb_rc new file mode 100644 index 000000000000..a0d18dbeb7a9 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-uwb_rc @@ -0,0 +1,144 @@ +What: /sys/class/uwb_rc +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + Interfaces for WiMedia Ultra Wideband Common Radio + Platform (UWB) radio controllers. + + Familiarity with the ECMA-368 'High Rate Ultra + Wideband MAC and PHY Specification' is assumed. + +What: /sys/class/uwb_rc/beacon_timeout_ms +Date: July 2008 +KernelVersion: 2.6.27 +Description: + If no beacons are received from a device for at least + this time, the device will be considered to have gone + and it will be removed. The default is 3 superframes + (~197 ms) as required by the specification. + +What: /sys/class/uwb_rc/uwbN/ +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + An individual UWB radio controller. + +What: /sys/class/uwb_rc/uwbN/beacon +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + Write: + + <channel> [<bpst offset>] + + to start beaconing on a specific channel, or stop + beaconing if <channel> is -1. Valid channels depends + on the radio controller's supported band groups. + + <bpst offset> may be used to try and join a specific + beacon group if more than one was found during a scan. + +What: /sys/class/uwb_rc/uwbN/scan +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + Write: + + <channel> <type> [<bpst offset>] + + to start (or stop) scanning on a channel. <type> is one of: + 0 - scan + 1 - scan outside BP + 2 - scan while inactive + 3 - scanning disabled + 4 - scan (with start time of <bpst offset>) + +What: /sys/class/uwb_rc/uwbN/mac_address +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + The EUI-48, in colon-separated hex octets, for this + radio controller. A write will change the radio + controller's EUI-48 but only do so while the device is + not beaconing or scanning. + +What: /sys/class/uwb_rc/uwbN/wusbhc +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + A symlink to the device (if any) of the WUSB Host + Controller PAL using this radio controller. + +What: /sys/class/uwb_rc/uwbN/<EUI-48>/ +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + A neighbour UWB device that has either been detected + as part of a scan or is a member of the radio + controllers beacon group. + +What: /sys/class/uwb_rc/uwbN/<EUI-48>/BPST +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + The time (using the radio controllers internal 1 ms + interval superframe timer) of the last beacon from + this device was received. + +What: /sys/class/uwb_rc/uwbN/<EUI-48>/DevAddr +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + The current DevAddr of this device in colon separated + hex octets. + +What: /sys/class/uwb_rc/uwbN/<EUI-48>/EUI_48 +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + + The EUI-48 of this device in colon separated hex + octets. + +What: /sys/class/uwb_rc/uwbN/<EUI-48>/BPST +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + +What: /sys/class/uwb_rc/uwbN/<EUI-48>/IEs +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + The latest IEs included in this device's beacon, in + space separated hex octets with one IE per line. + +What: /sys/class/uwb_rc/uwbN/<EUI-48>/LQE +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + Link Quality Estimate - the Signal to Noise Ratio + (SNR) of all packets received from this device in dB. + This gives an estimate on a suitable PHY rate. Refer + to [ECMA-368] section 13.3 for more details. + +What: /sys/class/uwb_rc/uwbN/<EUI-48>/RSSI +Date: July 2008 +KernelVersion: 2.6.27 +Contact: linux-usb@vger.kernel.org +Description: + Received Signal Strength Indication - the strength of + the received signal in dB. LQE is a more useful + measure of the radio link quality. diff --git a/Documentation/ABI/testing/sysfs-wusb_cbaf b/Documentation/ABI/testing/sysfs-wusb_cbaf new file mode 100644 index 000000000000..a99c5f86a37a --- /dev/null +++ b/Documentation/ABI/testing/sysfs-wusb_cbaf @@ -0,0 +1,100 @@ +What: /sys/bus/usb/drivers/wusb_cbaf/.../wusb_* +Date: August 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + Various files for managing Cable Based Association of + (wireless) USB devices. + + The sequence of operations should be: + + 1. Device is plugged in. + + 2. The connection manager (CM) sees a device with CBA capability. + (the wusb_chid etc. files in /sys/devices/blah/OURDEVICE). + + 3. The CM writes the host name, supported band groups, + and the CHID (host ID) into the wusb_host_name, + wusb_host_band_groups and wusb_chid files. These + get sent to the device and the CDID (if any) for + this host is requested. + + 4. The CM can verify that the device's supported band + groups (wusb_device_band_groups) are compatible + with the host. + + 5. The CM reads the wusb_cdid file. + + 6. The CM looks it up its database. + + - If it has a matching CHID,CDID entry, the device + has been authorized before and nothing further + needs to be done. + + - If the CDID is zero (or the CM doesn't find a + matching CDID in its database), the device is + assumed to be not known. The CM may associate + the host with device by: writing a randomly + generated CDID to wusb_cdid and then a random CK + to wusb_ck (this uploads the new CC to the + device). + + CMD may choose to prompt the user before + associating with a new device. + + 7. Device is unplugged. + + References: + [WUSB-AM] Association Models Supplement to the + Certified Wireless Universal Serial Bus + Specification, version 1.0. + +What: /sys/bus/usb/drivers/wusb_cbaf/.../wusb_chid +Date: August 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + The CHID of the host formatted as 16 space-separated + hex octets. + + Writes fetches device's supported band groups and the + the CDID for any existing association with this host. + +What: /sys/bus/usb/drivers/wusb_cbaf/.../wusb_host_name +Date: August 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + A friendly name for the host as a UTF-8 encoded string. + +What: /sys/bus/usb/drivers/wusb_cbaf/.../wusb_host_band_groups +Date: August 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + The band groups supported by the host, in the format + defined in [WUSB-AM]. + +What: /sys/bus/usb/drivers/wusb_cbaf/.../wusb_device_band_groups +Date: August 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + The band groups supported by the device, in the format + defined in [WUSB-AM]. + +What: /sys/bus/usb/drivers/wusb_cbaf/.../wusb_cdid +Date: August 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + The device's CDID formatted as 16 space-separated hex + octets. + +What: /sys/bus/usb/drivers/wusb_cbaf/.../wusb_ck +Date: August 2008 +KernelVersion: 2.6.27 +Contact: David Vrabel <david.vrabel@csr.com> +Description: + Write 16 space-separated random, hex octets to + associate with the device. diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index f5f812daf9f4..05d71b4b9430 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -359,3 +359,11 @@ Why: The 2.6 kernel supports direct writing to ide CD drives, which eliminates the need for ide-scsi. The new method is more efficient in every way. Who: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> + +--------------------------- + +What: i2c_attach_client(), i2c_detach_client(), i2c_driver->detach_client() +When: 2.6.29 (ideally) or 2.6.30 (more likely) +Why: Deprecated by the new (standard) device driver binding model. Use + i2c_driver->probe() and ->remove() instead. +Who: Jean Delvare <khali@linux-fr.org> diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index c31e0291e167..81c0c59a60ea 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -13,8 +13,9 @@ Supported adapters: * Intel 631xESB/632xESB (ESB2) * Intel 82801H (ICH8) * Intel 82801I (ICH9) - * Intel Tolapai - * Intel ICH10 + * Intel EP80579 (Tolapai) + * Intel 82801JI (ICH10) + * Intel PCH Datasheets: Publicly available at the Intel website Authors: @@ -32,7 +33,7 @@ Description ----------- The ICH (properly known as the 82801AA), ICH0 (82801AB), ICH2 (82801BA), -ICH3 (82801CA/CAM) and later devices are Intel chips that are a part of +ICH3 (82801CA/CAM) and later devices (PCH) are Intel chips that are a part of Intel's '810' chipset for Celeron-based PCs, '810E' chipset for Pentium-based PCs, '815E' chipset, and others. diff --git a/Documentation/i2c/porting-clients b/Documentation/i2c/porting-clients deleted file mode 100644 index 7bf82c08f6ca..000000000000 --- a/Documentation/i2c/porting-clients +++ /dev/null @@ -1,160 +0,0 @@ -Revision 7, 2007-04-19 -Jean Delvare <khali@linux-fr.org> -Greg KH <greg@kroah.com> - -This is a guide on how to convert I2C chip drivers from Linux 2.4 to -Linux 2.6. I have been using existing drivers (lm75, lm78) as examples. -Then I converted a driver myself (lm83) and updated this document. -Note that this guide is strongly oriented towards hardware monitoring -drivers. Many points are still valid for other type of drivers, but -others may be irrelevant. - -There are two sets of points below. The first set concerns technical -changes. The second set concerns coding policy. Both are mandatory. - -Although reading this guide will help you porting drivers, I suggest -you keep an eye on an already ported driver while porting your own -driver. This will help you a lot understanding what this guide -exactly means. Choose the chip driver that is the more similar to -yours for best results. - -Technical changes: - -* [Driver type] Any driver that was relying on i2c-isa has to be - converted to a proper isa, platform or pci driver. This is not - covered by this guide. - -* [Includes] Get rid of "version.h" and <linux/i2c-proc.h>. - Includes typically look like that: - #include <linux/module.h> - #include <linux/init.h> - #include <linux/slab.h> - #include <linux/jiffies.h> - #include <linux/i2c.h> - #include <linux/hwmon.h> /* for hardware monitoring drivers */ - #include <linux/hwmon-sysfs.h> - #include <linux/hwmon-vid.h> /* if you need VRM support */ - #include <linux/err.h> /* for class registration */ - Please respect this inclusion order. Some extra headers may be - required for a given driver (e.g. "lm75.h"). - -* [Addresses] SENSORS_I2C_END becomes I2C_CLIENT_END, ISA addresses - are no more handled by the i2c core. Address ranges are no more - supported either, define each individual address separately. - SENSORS_INSMOD_<n> becomes I2C_CLIENT_INSMOD_<n>. - -* [Client data] Get rid of sysctl_id. Try using standard names for - register values (for example, temp_os becomes temp_max). You're - still relatively free here, but you *have* to follow the standard - names for sysfs files (see the Sysctl section below). - -* [Function prototypes] The detect functions loses its flags - parameter. Sysctl (e.g. lm75_temp) and miscellaneous functions - are off the list of prototypes. This usually leaves five - prototypes: - static int lm75_attach_adapter(struct i2c_adapter *adapter); - static int lm75_detect(struct i2c_adapter *adapter, int address, - int kind); - static void lm75_init_client(struct i2c_client *client); - static int lm75_detach_client(struct i2c_client *client); - static struct lm75_data lm75_update_device(struct device *dev); - -* [Sysctl] All sysctl stuff is of course gone (defines, ctl_table - and functions). Instead, you have to define show and set functions for - each sysfs file. Only define set for writable values. Take a look at an - existing 2.6 driver for details (it87 for example). Don't forget - to define the attributes for each file (this is that step that - links callback functions). Use the file names specified in - Documentation/hwmon/sysfs-interface for the individual files. Also - convert the units these files read and write to the specified ones. - If you need to add a new type of file, please discuss it on the - sensors mailing list <lm-sensors@lm-sensors.org> by providing a - patch to the Documentation/hwmon/sysfs-interface file. - -* [Attach] The attach function should make sure that the adapter's - class has I2C_CLASS_HWMON (or whatever class is suitable for your - driver), using the following construct: - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - Call i2c_probe() instead of i2c_detect(). - -* [Detect] As mentioned earlier, the flags parameter is gone. - The type_name and client_name strings are replaced by a single - name string, which will be filled with a lowercase, short string. - The labels used for error paths are reduced to the number needed. - It is advised that the labels are given descriptive names such as - exit and exit_free. Don't forget to properly set err before - jumping to error labels. By the way, labels should be left-aligned. - Use kzalloc instead of kmalloc. - Use i2c_set_clientdata to set the client data (as opposed to - a direct access to client->data). - Use strlcpy instead of strcpy or snprintf to copy the client name. - Replace the sysctl directory registration by calls to - device_create_file. Move the driver initialization before any - sysfs file creation. - Register the client with the hwmon class (using hwmon_device_register) - if applicable. - Drop client->id. - Drop any 24RF08 corruption prevention you find, as this is now done - at the i2c-core level, and doing it twice voids it. - Don't add I2C_CLIENT_ALLOW_USE to client->flags, it's the default now. - -* [Init] Limits must not be set by the driver (can be done later in - user-space). Chip should not be reset default (although a module - parameter may be used to force it), and initialization should be - limited to the strictly necessary steps. - -* [Detach] Remove the call to i2c_deregister_entry. Do not log an - error message if i2c_detach_client fails, as i2c-core will now do - it for you. - Unregister from the hwmon class if applicable. - -* [Update] The function prototype changed, it is now - passed a device structure, which you have to convert to a client - using to_i2c_client(dev). The update function should return a - pointer to the client data. - Don't access client->data directly, use i2c_get_clientdata(client) - instead. - Use time_after() instead of direct jiffies comparison. - -* [Interface] Make sure there is a MODULE_LICENSE() line, at the bottom - of the file (after MODULE_AUTHOR() and MODULE_DESCRIPTION(), in this - order). - -* [Driver] The flags field of the i2c_driver structure is gone. - I2C_DF_NOTIFY is now the default behavior. - The i2c_driver structure has a driver member, which is itself a - structure, those name member should be initialized to a driver name - string. i2c_driver itself has no name member anymore. - -* [Driver model] Instead of shutdown or reboot notifiers, provide a - shutdown() method in your driver. - -* [Power management] Use the driver model suspend() and resume() - callbacks instead of the obsolete pm_register() calls. - -Coding policy: - -* [Copyright] Use (C), not (c), for copyright. - -* [Debug/log] Get rid of #ifdef DEBUG/#endif constructs whenever you - can. Calls to printk for debugging purposes are replaced by calls to - dev_dbg where possible, else to pr_debug. Here is an example of how - to call it (taken from lm75_detect): - dev_dbg(&client->dev, "Starting lm75 update\n"); - Replace other printk calls with the dev_info, dev_err or dev_warn - function, as appropriate. - -* [Constants] Constants defines (registers, conversions) should be - aligned. This greatly improves readability. - Alignments are achieved by the means of tabs, not spaces. Remember - that tabs are set to 8 in the Linux kernel code. - -* [Layout] Avoid extra empty lines between comments and what they - comment. Respect the coding style (see Documentation/CodingStyle), - in particular when it comes to placing curly braces. - -* [Comments] Make sure that no comment refers to a file that isn't - part of the Linux source tree (typically doc/chips/<chip name>), - and that remaining comments still match the code. Merging comment - lines when possible is encouraged. diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index d73ee117a8ca..6b9af7d479c2 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -10,23 +10,21 @@ General remarks =============== Try to keep the kernel namespace as clean as possible. The best way to -do this is to use a unique prefix for all global symbols. This is +do this is to use a unique prefix for all global symbols. This is especially important for exported symbols, but it is a good idea to do it for non-exported symbols too. We will use the prefix `foo_' in this -tutorial, and `FOO_' for preprocessor variables. +tutorial. The driver structure ==================== Usually, you will implement a single driver structure, and instantiate -all clients from it. Remember, a driver structure contains general access +all clients from it. Remember, a driver structure contains general access routines, and should be zero-initialized except for fields with data you provide. A client structure holds device-specific information like the driver model device node, and its I2C address. -/* iff driver uses driver model ("new style") binding model: */ - static struct i2c_device_id foo_idtable[] = { { "foo", my_id_for_foo }, { "bar", my_id_for_bar }, @@ -40,7 +38,6 @@ static struct i2c_driver foo_driver = { .name = "foo", }, - /* iff driver uses driver model ("new style") binding model: */ .id_table = foo_ids, .probe = foo_probe, .remove = foo_remove, @@ -49,24 +46,19 @@ static struct i2c_driver foo_driver = { .detect = foo_detect, .address_data = &addr_data, - /* else, driver uses "legacy" binding model: */ - .attach_adapter = foo_attach_adapter, - .detach_client = foo_detach_client, - - /* these may be used regardless of the driver binding model */ .shutdown = foo_shutdown, /* optional */ .suspend = foo_suspend, /* optional */ .resume = foo_resume, /* optional */ - .command = foo_command, /* optional */ + .command = foo_command, /* optional, deprecated */ } - + The name field is the driver name, and must not contain spaces. It should match the module name (if the driver can be compiled as a module), although you can use MODULE_ALIAS (passing "foo" in this example) to add another name for the module. If the driver name doesn't match the module name, the module won't be automatically loaded (hotplug/coldplug). -All other fields are for call-back functions which will be explained +All other fields are for call-back functions which will be explained below. @@ -74,34 +66,13 @@ Extra client data ================= Each client structure has a special `data' field that can point to any -structure at all. You should use this to keep device-specific data, -especially in drivers that handle multiple I2C or SMBUS devices. You -do not always need this, but especially for `sensors' drivers, it can -be very useful. +structure at all. You should use this to keep device-specific data. /* store the value */ void i2c_set_clientdata(struct i2c_client *client, void *data); /* retrieve the value */ - void *i2c_get_clientdata(struct i2c_client *client); - -An example structure is below. - - struct foo_data { - struct i2c_client client; - enum chips type; /* To keep the chips type for `sensors' drivers. */ - - /* Because the i2c bus is slow, it is often useful to cache the read - information of a chip for some time (for example, 1 or 2 seconds). - It depends of course on the device whether this is really worthwhile - or even sensible. */ - struct mutex update_lock; /* When we are reading lots of information, - another process should not update the - below information */ - char valid; /* != 0 if the following fields are valid. */ - unsigned long last_updated; /* In jiffies */ - /* Add the read information here too */ - }; + void *i2c_get_clientdata(const struct i2c_client *client); Accessing the client @@ -109,11 +80,9 @@ Accessing the client Let's say we have a valid client structure. At some time, we will need to gather information from the client, or write new information to the -client. How we will export this information to user-space is less -important at this moment (perhaps we do not need to do this at all for -some obscure clients). But we need generic reading and writing routines. +client. -I have found it useful to define foo_read and foo_write function for this. +I have found it useful to define foo_read and foo_write functions for this. For some cases, it will be easier to call the i2c functions directly, but many chips have some kind of register-value idea that can easily be encapsulated. @@ -121,33 +90,33 @@ be encapsulated. The below functions are simple examples, and should not be copied literally. - int foo_read_value(struct i2c_client *client, u8 reg) - { - if (reg < 0x10) /* byte-sized register */ - return i2c_smbus_read_byte_data(client,reg); - else /* word-sized register */ - return i2c_smbus_read_word_data(client,reg); - } - - int foo_write_value(struct i2c_client *client, u8 reg, u16 value) - { - if (reg == 0x10) /* Impossible to write - driver error! */ { - return -1; - else if (reg < 0x10) /* byte-sized register */ - return i2c_smbus_write_byte_data(client,reg,value); - else /* word-sized register */ - return i2c_smbus_write_word_data(client,reg,value); - } +int foo_read_value(struct i2c_client *client, u8 reg) +{ + if (reg < 0x10) /* byte-sized register */ + return i2c_smbus_read_byte_data(client, reg); + else /* word-sized register */ + return i2c_smbus_read_word_data(client, reg); +} + +int foo_write_value(struct i2c_client *client, u8 reg, u16 value) +{ + if (reg == 0x10) /* Impossible to write - driver error! */ + return -EINVAL; + else if (reg < 0x10) /* byte-sized register */ + return i2c_smbus_write_byte_data(client, reg, value); + else /* word-sized register */ + return i2c_smbus_write_word_data(client, reg, value); +} Probing and attaching ===================== The Linux I2C stack was originally written to support access to hardware -monitoring chips on PC motherboards, and thus it embeds some assumptions -that are more appropriate to SMBus (and PCs) than to I2C. One of these -assumptions is that most adapters and devices drivers support the SMBUS_QUICK -protocol to probe device presence. Another is that devices and their drivers +monitoring chips on PC motherboards, and thus used to embed some assumptions +that were more appropriate to SMBus (and PCs) than to I2C. One of these +assumptions was that most adapters and devices drivers support the SMBUS_QUICK +protocol to probe device presence. Another was that devices and their drivers can be sufficiently configured using only such probe primitives. As Linux and its I2C stack became more widely used in embedded systems @@ -164,6 +133,9 @@ since the "legacy" model requires drivers to create "i2c_client" device objects after SMBus style probing, while the Linux driver model expects drivers to be given such device objects in their probe() routines. +The legacy model is deprecated now and will soon be removed, so we no +longer document it here. + Standard Driver Model Binding ("New Style") ------------------------------------------- @@ -193,8 +165,8 @@ matches the device's name. It is passed the entry that was matched so the driver knows which one in the table matched. -Device Creation (Standard driver model) ---------------------------------------- +Device Creation +--------------- If you know for a fact that an I2C device is connected to a given I2C bus, you can instantiate that device by simply filling an i2c_board_info @@ -221,8 +193,8 @@ in the I2C bus driver. You may want to save the returned i2c_client reference for later use. -Device Detection (Standard driver model) ----------------------------------------- +Device Detection +---------------- Sometimes you do not know in advance which I2C devices are connected to a given I2C bus. This is for example the case of hardware monitoring @@ -246,8 +218,8 @@ otherwise misdetections are likely to occur and things can get wrong quickly. -Device Deletion (Standard driver model) ---------------------------------------- +Device Deletion +--------------- Each I2C device which has been created using i2c_new_device() or i2c_new_probed_device() can be unregistered by calling @@ -256,264 +228,37 @@ called automatically before the underlying I2C bus itself is removed, as a device can't survive its parent in the device driver model. -Legacy Driver Binding Model ---------------------------- +Initializing the driver +======================= + +When the kernel is booted, or when your foo driver module is inserted, +you have to do some initializing. Fortunately, just registering the +driver module is usually enough. -Most i2c devices can be present on several i2c addresses; for some this -is determined in hardware (by soldering some chip pins to Vcc or Ground), -for others this can be changed in software (by writing to specific client -registers). Some devices are usually on a specific address, but not always; -and some are even more tricky. So you will probably need to scan several -i2c addresses for your clients, and do some sort of detection to see -whether it is actually a device supported by your driver. +static int __init foo_init(void) +{ + return i2c_add_driver(&foo_driver); +} + +static void __exit foo_cleanup(void) +{ + i2c_del_driver(&foo_driver); +} + +/* Substitute your own name and email address */ +MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>" +MODULE_DESCRIPTION("Driver for Barf Inc. Foo I2C devices"); -To give the user a maximum of possibilities, some default module parameters -are defined to help determine what addresses are scanned. Several macros -are defined in i2c.h to help you support them, as well as a generic -detection algorithm. - -You do not have to use this parameter interface; but don't try to use -function i2c_probe() if you don't. - - -Probing classes (Legacy model) ------------------------------- - -All parameters are given as lists of unsigned 16-bit integers. Lists are -terminated by I2C_CLIENT_END. -The following lists are used internally: - - normal_i2c: filled in by the module writer. - A list of I2C addresses which should normally be examined. - probe: insmod parameter. - A list of pairs. The first value is a bus number (-1 for any I2C bus), - the second is the address. These addresses are also probed, as if they - were in the 'normal' list. - ignore: insmod parameter. - A list of pairs. The first value is a bus number (-1 for any I2C bus), - the second is the I2C address. These addresses are never probed. - This parameter overrules the 'normal_i2c' list only. - force: insmod parameter. - A list of pairs. The first value is a bus number (-1 for any I2C bus), - the second is the I2C address. A device is blindly assumed to be on - the given address, no probing is done. - -Additionally, kind-specific force lists may optionally be defined if -the driver supports several chip kinds. They are grouped in a -NULL-terminated list of pointers named forces, those first element if the -generic force list mentioned above. Each additional list correspond to an -insmod parameter of the form force_<kind>. - -Fortunately, as a module writer, you just have to define the `normal_i2c' -parameter. The complete declaration could look like this: - - /* Scan 0x4c to 0x4f */ - static const unsigned short normal_i2c[] = { 0x4c, 0x4d, 0x4e, 0x4f, - I2C_CLIENT_END }; - - /* Magic definition of all other variables and things */ - I2C_CLIENT_INSMOD; - /* Or, if your driver supports, say, 2 kind of devices: */ - I2C_CLIENT_INSMOD_2(foo, bar); - -If you use the multi-kind form, an enum will be defined for you: - enum chips { any_chip, foo, bar, ... } -You can then (and certainly should) use it in the driver code. - -Note that you *have* to call the defined variable `normal_i2c', -without any prefix! - - -Attaching to an adapter (Legacy model) --------------------------------------- - -Whenever a new adapter is inserted, or for all adapters if the driver is -being registered, the callback attach_adapter() is called. Now is the -time to determine what devices are present on the adapter, and to register -a client for each of them. - -The attach_adapter callback is really easy: we just call the generic -detection function. This function will scan the bus for us, using the -information as defined in the lists explained above. If a device is -detected at a specific address, another callback is called. - - int foo_attach_adapter(struct i2c_adapter *adapter) - { - return i2c_probe(adapter,&addr_data,&foo_detect_client); - } - -Remember, structure `addr_data' is defined by the macros explained above, -so you do not have to define it yourself. - -The i2c_probe function will call the foo_detect_client -function only for those i2c addresses that actually have a device on -them (unless a `force' parameter was used). In addition, addresses that -are already in use (by some other registered client) are skipped. - - -The detect client function (Legacy model) ------------------------------------------ - -The detect client function is called by i2c_probe. The `kind' parameter -contains -1 for a probed detection, 0 for a forced detection, or a positive -number for a forced detection with a chip type forced. - -Returning an error different from -ENODEV in a detect function will cause -the detection to stop: other addresses and adapters won't be scanned. -This should only be done on fatal or internal errors, such as a memory -shortage or i2c_attach_client failing. - -For now, you can ignore the `flags' parameter. It is there for future use. - - int foo_detect_client(struct i2c_adapter *adapter, int address, - int kind) - { - int err = 0; - int i; - struct i2c_client *client; - struct foo_data *data; - const char *name = ""; - - /* Let's see whether this adapter can support what we need. - Please substitute the things you need here! */ - if (!i2c_check_functionality(adapter,I2C_FUNC_SMBUS_WORD_DATA | - I2C_FUNC_SMBUS_WRITE_BYTE)) - goto ERROR0; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access several i2c functions safely */ - - if (!(data = kzalloc(sizeof(struct foo_data), GFP_KERNEL))) { - err = -ENOMEM; - goto ERROR0; - } - - client = &data->client; - i2c_set_clientdata(client, data); - - client->addr = address; - client->adapter = adapter; - client->driver = &foo_driver; - - /* Now, we do the remaining detection. If no `force' parameter is used. */ - - /* First, the generic detection (if any), that is skipped if any force - parameter was used. */ - if (kind < 0) { - /* The below is of course bogus */ - if (foo_read(client, FOO_REG_GENERIC) != FOO_GENERIC_VALUE) - goto ERROR1; - } - - /* Next, specific detection. This is especially important for `sensors' - devices. */ - - /* Determine the chip type. Not needed if a `force_CHIPTYPE' parameter - was used. */ - if (kind <= 0) { - i = foo_read(client, FOO_REG_CHIPTYPE); - if (i == FOO_TYPE_1) - kind = chip1; /* As defined in the enum */ - else if (i == FOO_TYPE_2) - kind = chip2; - else { - printk("foo: Ignoring 'force' parameter for unknown chip at " - "adapter %d, address 0x%02x\n",i2c_adapter_id(adapter),address); - goto ERROR1; - } - } - - /* Now set the type and chip names */ - if (kind == chip1) { - name = "chip1"; - } else if (kind == chip2) { - name = "chip2"; - } - - /* Fill in the remaining client fields. */ - strlcpy(client->name, name, I2C_NAME_SIZE); - data->type = kind; - mutex_init(&data->update_lock); /* Only if you use this field */ - - /* Any other initializations in data must be done here too. */ - - /* This function can write default values to the client registers, if - needed. */ - foo_init_client(client); - - /* Tell the i2c layer a new client has arrived */ - if ((err = i2c_attach_client(client))) - goto ERROR1; - - return 0; - - /* OK, this is not exactly good programming practice, usually. But it is - very code-efficient in this case. */ - - ERROR1: - kfree(data); - ERROR0: - return err; - } - - -Removing the client (Legacy model) -================================== - -The detach_client call back function is called when a client should be -removed. It may actually fail, but only when panicking. This code is -much simpler than the attachment code, fortunately! - - int foo_detach_client(struct i2c_client *client) - { - int err; - - /* Try to detach the client from i2c space */ - if ((err = i2c_detach_client(client))) - return err; - - kfree(i2c_get_clientdata(client)); - return 0; - } - - -Initializing the module or kernel -================================= - -When the kernel is booted, or when your foo driver module is inserted, -you have to do some initializing. Fortunately, just attaching (registering) -the driver module is usually enough. - - static int __init foo_init(void) - { - int res; - - if ((res = i2c_add_driver(&foo_driver))) { - printk("foo: Driver registration failed, module not inserted.\n"); - return res; - } - return 0; - } - - static void __exit foo_cleanup(void) - { - i2c_del_driver(&foo_driver); - } - - /* Substitute your own name and email address */ - MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>" - MODULE_DESCRIPTION("Driver for Barf Inc. Foo I2C devices"); - - /* a few non-GPL license types are also allowed */ - MODULE_LICENSE("GPL"); - - module_init(foo_init); - module_exit(foo_cleanup); - -Note that some functions are marked by `__init', and some data structures -by `__initdata'. These functions and structures can be removed after -kernel booting (or module loading) is completed. +/* a few non-GPL license types are also allowed */ +MODULE_LICENSE("GPL"); + +module_init(foo_init); +module_exit(foo_cleanup); + +Note that some functions are marked by `__init'. These functions can +be removed after kernel booting (or module loading) is completed. +Likewise, functions marked by `__exit' are dropped by the compiler when +the code is built into the kernel, as they would never be called. Power Management @@ -548,33 +293,35 @@ Command function A generic ioctl-like function call back is supported. You will seldom need this, and its use is deprecated anyway, so newer design should not -use it. Set it to NULL. +use it. Sending and receiving ===================== If you want to communicate with your device, there are several functions -to do this. You can find all of them in i2c.h. +to do this. You can find all of them in <linux/i2c.h>. -If you can choose between plain i2c communication and SMBus level -communication, please use the last. All adapters understand SMBus level -commands, but only some of them understand plain i2c! +If you can choose between plain I2C communication and SMBus level +communication, please use the latter. All adapters understand SMBus level +commands, but only some of them understand plain I2C! -Plain i2c communication +Plain I2C communication ----------------------- - extern int i2c_master_send(struct i2c_client *,const char* ,int); - extern int i2c_master_recv(struct i2c_client *,char* ,int); + int i2c_master_send(struct i2c_client *client, const char *buf, + int count); + int i2c_master_recv(struct i2c_client *client, char *buf, int count); These routines read and write some bytes from/to a client. The client contains the i2c address, so you do not have to include it. The second -parameter contains the bytes the read/write, the third the length of the -buffer. Returned is the actual number of bytes read/written. - - extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msg, - int num); +parameter contains the bytes to read/write, the third the number of bytes +to read/write (must be less than the length of the buffer.) Returned is +the actual number of bytes read/written. + + int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msg, + int num); This sends a series of messages. Each message can be a read or write, and they can be mixed in any way. The transactions are combined: no @@ -583,49 +330,45 @@ for each message the client address, the number of bytes of the message and the message data itself. You can read the file `i2c-protocol' for more information about the -actual i2c protocol. +actual I2C protocol. SMBus communication ------------------- - extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr, - unsigned short flags, - char read_write, u8 command, int size, - union i2c_smbus_data * data); - - This is the generic SMBus function. All functions below are implemented - in terms of it. Never use this function directly! - - - extern s32 i2c_smbus_read_byte(struct i2c_client * client); - extern s32 i2c_smbus_write_byte(struct i2c_client * client, u8 value); - extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command); - extern s32 i2c_smbus_write_byte_data(struct i2c_client * client, - u8 command, u8 value); - extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command); - extern s32 i2c_smbus_write_word_data(struct i2c_client * client, - u8 command, u16 value); - extern s32 i2c_smbus_process_call(struct i2c_client *client, - u8 command, u16 value); - extern s32 i2c_smbus_read_block_data(struct i2c_client * client, - u8 command, u8 *values); - extern s32 i2c_smbus_write_block_data(struct i2c_client * client, - u8 command, u8 length, - u8 *values); - extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client, - u8 command, u8 length, u8 *values); - extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client, - u8 command, u8 length, - u8 *values); + s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, + unsigned short flags, char read_write, u8 command, + int size, union i2c_smbus_data *data); + +This is the generic SMBus function. All functions below are implemented +in terms of it. Never use this function directly! + + s32 i2c_smbus_read_byte(struct i2c_client *client); + s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value); + s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command); + s32 i2c_smbus_write_byte_data(struct i2c_client *client, + u8 command, u8 value); + s32 i2c_smbus_read_word_data(struct i2c_client *client, u8 command); + s32 i2c_smbus_write_word_data(struct i2c_client *client, + u8 command, u16 value); + s32 i2c_smbus_process_call(struct i2c_client *client, + u8 command, u16 value); + s32 i2c_smbus_read_block_data(struct i2c_client *client, + u8 command, u8 *values); + s32 i2c_smbus_write_block_data(struct i2c_client *client, + u8 command, u8 length, const u8 *values); + s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client, + u8 command, u8 length, u8 *values); + s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, + u8 command, u8 length, + const u8 *values); These ones were removed from i2c-core because they had no users, but could be added back later if needed: - extern s32 i2c_smbus_write_quick(struct i2c_client * client, u8 value); - extern s32 i2c_smbus_block_process_call(struct i2c_client *client, - u8 command, u8 length, - u8 *values) + s32 i2c_smbus_write_quick(struct i2c_client *client, u8 value); + s32 i2c_smbus_block_process_call(struct i2c_client *client, + u8 command, u8 length, u8 *values); All these transactions return a negative errno value on failure. The 'write' transactions return 0 on success; the 'read' transactions return the read @@ -642,7 +385,5 @@ General purpose routines Below all general purpose routines are listed, that were not mentioned before. - /* This call returns a unique low identifier for each registered adapter. - */ - extern int i2c_adapter_id(struct i2c_adapter *adap); - + /* Return the adapter number for a specific adapter */ + int i2c_adapter_id(struct i2c_adapter *adap); diff --git a/Documentation/ia64/xen.txt b/Documentation/ia64/xen.txt new file mode 100644 index 000000000000..c61a99f7c8bb --- /dev/null +++ b/Documentation/ia64/xen.txt @@ -0,0 +1,183 @@ + Recipe for getting/building/running Xen/ia64 with pv_ops + -------------------------------------------------------- + +This recipe describes how to get xen-ia64 source and build it, +and run domU with pv_ops. + +============ +Requirements +============ + + - python + - mercurial + it (aka "hg") is an open-source source code + management software. See the below. + http://www.selenic.com/mercurial/wiki/ + - git + - bridge-utils + +================================= +Getting and Building Xen and Dom0 +================================= + + My environment is; + Machine : Tiger4 + Domain0 OS : RHEL5 + DomainU OS : RHEL5 + + 1. Download source + # hg clone http://xenbits.xensource.com/ext/ia64/xen-unstable.hg + # cd xen-unstable.hg + # hg clone http://xenbits.xensource.com/ext/ia64/linux-2.6.18-xen.hg + + 2. # make world + + 3. # make install-tools + + 4. copy kernels and xen + # cp xen/xen.gz /boot/efi/efi/redhat/ + # cp build-linux-2.6.18-xen_ia64/vmlinux.gz \ + /boot/efi/efi/redhat/vmlinuz-2.6.18.8-xen + + 5. make initrd for Dom0/DomU + # make -C linux-2.6.18-xen.hg ARCH=ia64 modules_install \ + O=$(/bin/pwd)/build-linux-2.6.18-xen_ia64 + # mkinitrd -f /boot/efi/efi/redhat/initrd-2.6.18.8-xen.img \ + 2.6.18.8-xen --builtin mptspi --builtin mptbase \ + --builtin mptscsih --builtin uhci-hcd --builtin ohci-hcd \ + --builtin ehci-hcd + +================================ +Making a disk image for guest OS +================================ + + 1. make file + # dd if=/dev/zero of=/root/rhel5.img bs=1M seek=4096 count=0 + # mke2fs -F -j /root/rhel5.img + # mount -o loop /root/rhel5.img /mnt + # cp -ax /{dev,var,etc,usr,bin,sbin,lib} /mnt + # mkdir /mnt/{root,proc,sys,home,tmp} + + Note: You may miss some device files. If so, please create them + with mknod. Or you can use tar instead of cp. + + 2. modify DomU's fstab + # vi /mnt/etc/fstab + /dev/xvda1 / ext3 defaults 1 1 + none /dev/pts devpts gid=5,mode=620 0 0 + none /dev/shm tmpfs defaults 0 0 + none /proc proc defaults 0 0 + none /sys sysfs defaults 0 0 + + 3. modify inittab + set runlevel to 3 to avoid X trying to start + # vi /mnt/etc/inittab + id:3:initdefault: + Start a getty on the hvc0 console + X0:2345:respawn:/sbin/mingetty hvc0 + tty1-6 mingetty can be commented out + + 4. add hvc0 into /etc/securetty + # vi /mnt/etc/securetty (add hvc0) + + 5. umount + # umount /mnt + +FYI, virt-manager can also make a disk image for guest OS. +It's GUI tools and easy to make it. + +================== +Boot Xen & Domain0 +================== + + 1. replace elilo + elilo of RHEL5 can boot Xen and Dom0. + If you use old elilo (e.g RHEL4), please download from the below + http://elilo.sourceforge.net/cgi-bin/blosxom + and copy into /boot/efi/efi/redhat/ + # cp elilo-3.6-ia64.efi /boot/efi/efi/redhat/elilo.efi + + 2. modify elilo.conf (like the below) + # vi /boot/efi/efi/redhat/elilo.conf + prompt + timeout=20 + default=xen + relocatable + + image=vmlinuz-2.6.18.8-xen + label=xen + vmm=xen.gz + initrd=initrd-2.6.18.8-xen.img + read-only + append=" -- rhgb root=/dev/sda2" + +The append options before "--" are for xen hypervisor, +the options after "--" are for dom0. + +FYI, your machine may need console options like +"com1=19200,8n1 console=vga,com1". For example, +append="com1=19200,8n1 console=vga,com1 -- rhgb console=tty0 \ +console=ttyS0 root=/dev/sda2" + +===================================== +Getting and Building domU with pv_ops +===================================== + + 1. get pv_ops tree + # git clone http://people.valinux.co.jp/~yamahata/xen-ia64/linux-2.6-xen-ia64.git/ + + 2. git branch (if necessary) + # cd linux-2.6-xen-ia64/ + # git checkout -b your_branch origin/xen-ia64-domu-minimal-2008may19 + (Note: The current branch is xen-ia64-domu-minimal-2008may19. + But you would find the new branch. You can see with + "git branch -r" to get the branch lists. + http://people.valinux.co.jp/~yamahata/xen-ia64/for_eagl/linux-2.6-ia64-pv-ops.git/ + is also available. The tree is based on + git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 test) + + + 3. copy .config for pv_ops of domU + # cp arch/ia64/configs/xen_domu_wip_defconfig .config + + 4. make kernel with pv_ops + # make oldconfig + # make + + 5. install the kernel and initrd + # cp vmlinux.gz /boot/efi/efi/redhat/vmlinuz-2.6-pv_ops-xenU + # make modules_install + # mkinitrd -f /boot/efi/efi/redhat/initrd-2.6-pv_ops-xenU.img \ + 2.6.26-rc3xen-ia64-08941-g1b12161 --builtin mptspi \ + --builtin mptbase --builtin mptscsih --builtin uhci-hcd \ + --builtin ohci-hcd --builtin ehci-hcd + +======================== +Boot DomainU with pv_ops +======================== + + 1. make config of DomU + # vi /etc/xen/rhel5 + kernel = "/boot/efi/efi/redhat/vmlinuz-2.6-pv_ops-xenU" + ramdisk = "/boot/efi/efi/redhat/initrd-2.6-pv_ops-xenU.img" + vcpus = 1 + memory = 512 + name = "rhel5" + disk = [ 'file:/root/rhel5.img,xvda1,w' ] + root = "/dev/xvda1 ro" + extra= "rhgb console=hvc0" + + 2. After boot xen and dom0, start xend + # /etc/init.d/xend start + ( In the debugging case, # XEND_DEBUG=1 xend trace_start ) + + 3. start domU + # xm create -c rhel5 + +========= +Reference +========= +- Wiki of Xen/IA64 upstream merge + http://wiki.xensource.com/xenwiki/XenIA64/UpstreamMerge + +Written by Akio Takebe <takebe_akio@jp.fujitsu.com> on 28 May 2008 diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt index 0705040531a5..3f4bc840da8b 100644 --- a/Documentation/kdump/kdump.txt +++ b/Documentation/kdump/kdump.txt @@ -109,7 +109,8 @@ There are two possible methods of using Kdump. 2) Or use the system kernel binary itself as dump-capture kernel and there is no need to build a separate dump-capture kernel. This is possible only with the architecutres which support a relocatable kernel. As - of today, i386, x86_64 and ia64 architectures support relocatable kernel. + of today, i386, x86_64, ppc64 and ia64 architectures support relocatable + kernel. Building a relocatable kernel is advantageous from the point of view that one does not have to build a second kernel for capturing the dump. But @@ -207,8 +208,15 @@ Dump-capture kernel config options (Arch Dependent, i386 and x86_64) Dump-capture kernel config options (Arch Dependent, ppc64) ---------------------------------------------------------- -* Make and install the kernel and its modules. DO NOT add this kernel - to the boot loader configuration files. +1) Enable "Build a kdump crash kernel" support under "Kernel" options: + + CONFIG_CRASH_DUMP=y + +2) Enable "Build a relocatable kernel" support + + CONFIG_RELOCATABLE=y + + Make and install the kernel and its modules. Dump-capture kernel config options (Arch Dependent, ia64) ---------------------------------------------------------- diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt index de4063cb4fdc..02ea9a971b8e 100644 --- a/Documentation/powerpc/booting-without-of.txt +++ b/Documentation/powerpc/booting-without-of.txt @@ -1917,6 +1917,8 @@ platforms are moved over to use the flattened-device-tree model. inverse clock polarity (CPOL) mode - spi-cpha - (optional) Empty property indicating device requires shifted clock phase (CPHA) mode + - spi-cs-high - (optional) Empty property indicating device requires + chip select active high SPI example for an MPC5200 SPI bus: spi@f00 { diff --git a/Documentation/powerpc/dts-bindings/fsl/board.txt b/Documentation/powerpc/dts-bindings/fsl/board.txt index 74ae6f1cd2d6..81a917ef96e9 100644 --- a/Documentation/powerpc/dts-bindings/fsl/board.txt +++ b/Documentation/powerpc/dts-bindings/fsl/board.txt @@ -2,13 +2,13 @@ Required properties: - - device_type : Should be "board-control" + - compatible : Should be "fsl,<board>-bcsr" - reg : Offset and length of the register set for the device Example: bcsr@f8000000 { - device_type = "board-control"; + compatible = "fsl,mpc8360mds-bcsr"; reg = <f8000000 8000>; }; diff --git a/Documentation/usb/WUSB-Design-overview.txt b/Documentation/usb/WUSB-Design-overview.txt new file mode 100644 index 000000000000..4c3d62c7843a --- /dev/null +++ b/Documentation/usb/WUSB-Design-overview.txt @@ -0,0 +1,448 @@ + +Linux UWB + Wireless USB + WiNET + + (C) 2005-2006 Intel Corporation + Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + + This program is free software; you can redistribute it and/or + modify it under the terms of the GNU General Public License version + 2 as published by the Free Software Foundation. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + 02110-1301, USA. + + +Please visit http://bughost.org/thewiki/Design-overview.txt-1.8 for +updated content. + + * Design-overview.txt-1.8 + +This code implements a Ultra Wide Band stack for Linux, as well as +drivers for the the USB based UWB radio controllers defined in the +Wireless USB 1.0 specification (including Wireless USB host controller +and an Intel WiNET controller). + + 1. Introduction + 1. HWA: Host Wire adapters, your Wireless USB dongle + + 2. DWA: Device Wired Adaptor, a Wireless USB hub for wired + devices + 3. WHCI: Wireless Host Controller Interface, the PCI WUSB host + adapter + 2. The UWB stack + 1. Devices and hosts: the basic structure + + 2. Host Controller life cycle + + 3. On the air: beacons and enumerating the radio neighborhood + + 4. Device lists + 5. Bandwidth allocation + + 3. Wireless USB Host Controller drivers + + 4. Glossary + + + Introduction + +UWB is a wide-band communication protocol that is to serve also as the +low-level protocol for others (much like TCP sits on IP). Currently +these others are Wireless USB and TCP/IP, but seems Bluetooth and +Firewire/1394 are coming along. + +UWB uses a band from roughly 3 to 10 GHz, transmitting at a max of +~-41dB (or 0.074 uW/MHz--geography specific data is still being +negotiated w/ regulators, so watch for changes). That band is divided in +a bunch of ~1.5 GHz wide channels (or band groups) composed of three +subbands/subchannels (528 MHz each). Each channel is independent of each +other, so you could consider them different "busses". Initially this +driver considers them all a single one. + +Radio time is divided in 65536 us long /superframes/, each one divided +in 256 256us long /MASs/ (Media Allocation Slots), which are the basic +time/media allocation units for transferring data. At the beginning of +each superframe there is a Beacon Period (BP), where every device +transmit its beacon on a single MAS. The length of the BP depends on how +many devices are present and the length of their beacons. + +Devices have a MAC (fixed, 48 bit address) and a device (changeable, 16 +bit address) and send periodic beacons to advertise themselves and pass +info on what they are and do. They advertise their capabilities and a +bunch of other stuff. + +The different logical parts of this driver are: + + * + + *UWB*: the Ultra-Wide-Band stack -- manages the radio and + associated spectrum to allow for devices sharing it. Allows to + control bandwidth assingment, beaconing, scanning, etc + + * + + *WUSB*: the layer that sits on top of UWB to provide Wireless USB. + The Wireless USB spec defines means to control a UWB radio and to + do the actual WUSB. + + + HWA: Host Wire adapters, your Wireless USB dongle + +WUSB also defines a device called a Host Wire Adaptor (HWA), which in +mere terms is a USB dongle that enables your PC to have UWB and Wireless +USB. The Wireless USB Host Controller in a HWA looks to the host like a +[Wireless] USB controller connected via USB (!) + +The HWA itself is broken in two or three main interfaces: + + * + + *RC*: Radio control -- this implements an interface to the + Ultra-Wide-Band radio controller. The driver for this implements a + USB-based UWB Radio Controller to the UWB stack. + + * + + *HC*: the wireless USB host controller. It looks like a USB host + whose root port is the radio and the WUSB devices connect to it. + To the system it looks like a separate USB host. The driver (will) + implement a USB host controller (similar to UHCI, OHCI or EHCI) + for which the root hub is the radio...To reiterate: it is a USB + controller that is connected via USB instead of PCI. + + * + + *WINET*: some HW provide a WiNET interface (IP over UWB). This + package provides a driver for it (it looks like a network + interface, winetX). The driver detects when there is a link up for + their type and kick into gear. + + + DWA: Device Wired Adaptor, a Wireless USB hub for wired devices + +These are the complement to HWAs. They are a USB host for connecting +wired devices, but it is connected to your PC connected via Wireless +USB. To the system it looks like yet another USB host. To the untrained +eye, it looks like a hub that connects upstream wirelessly. + +We still offer no support for this; however, it should share a lot of +code with the HWA-RC driver; there is a bunch of factorization work that +has been done to support that in upcoming releases. + + + WHCI: Wireless Host Controller Interface, the PCI WUSB host adapter + +This is your usual PCI device that implements WHCI. Similar in concept +to EHCI, it allows your wireless USB devices (including DWAs) to connect +to your host via a PCI interface. As in the case of the HWA, it has a +Radio Control interface and the WUSB Host Controller interface per se. + +There is still no driver support for this, but will be in upcoming +releases. + + + The UWB stack + +The main mission of the UWB stack is to keep a tally of which devices +are in radio proximity to allow drivers to connect to them. As well, it +provides an API for controlling the local radio controllers (RCs from +now on), such as to start/stop beaconing, scan, allocate bandwidth, etc. + + + Devices and hosts: the basic structure + +The main building block here is the UWB device (struct uwb_dev). For +each device that pops up in radio presence (ie: the UWB host receives a +beacon from it) you get a struct uwb_dev that will show up in +/sys/class/uwb and in /sys/bus/uwb/devices. + +For each RC that is detected, a new struct uwb_rc is created. In turn, a +RC is also a device, so they also show in /sys/class/uwb and +/sys/bus/uwb/devices, but at the same time, only radio controllers show +up in /sys/class/uwb_rc. + + * + + [*] The reason for RCs being also devices is that not only we can + see them while enumerating the system device tree, but also on the + radio (their beacons and stuff), so the handling has to be + likewise to that of a device. + +Each RC driver is implemented by a separate driver that plugs into the +interface that the UWB stack provides through a struct uwb_rc_ops. The +spec creators have been nice enough to make the message format the same +for HWA and WHCI RCs, so the driver is really a very thin transport that +moves the requests from the UWB API to the device [/uwb_rc_ops->cmd()/] +and sends the replies and notifications back to the API +[/uwb_rc_neh_grok()/]. Notifications are handled to the UWB daemon, that +is chartered, among other things, to keep the tab of how the UWB radio +neighborhood looks, creating and destroying devices as they show up or +dissapear. + +Command execution is very simple: a command block is sent and a event +block or reply is expected back. For sending/receiving command/events, a +handle called /neh/ (Notification/Event Handle) is opened with +/uwb_rc_neh_open()/. + +The HWA-RC (USB dongle) driver (drivers/uwb/hwa-rc.c) does this job for +the USB connected HWA. Eventually, drivers/whci-rc.c will do the same +for the PCI connected WHCI controller. + + + Host Controller life cycle + +So let's say we connect a dongle to the system: it is detected and +firmware uploaded if needed [for Intel's i1480 +/drivers/uwb/ptc/usb.c:ptc_usb_probe()/] and then it is reenumerated. +Now we have a real HWA device connected and +/drivers/uwb/hwa-rc.c:hwarc_probe()/ picks it up, that will set up the +Wire-Adaptor environment and then suck it into the UWB stack's vision of +the world [/drivers/uwb/lc-rc.c:uwb_rc_add()/]. + + * + + [*] The stack should put a new RC to scan for devices + [/uwb_rc_scan()/] so it finds what's available around and tries to + connect to them, but this is policy stuff and should be driven + from user space. As of now, the operator is expected to do it + manually; see the release notes for documentation on the procedure. + +When a dongle is disconnected, /drivers/uwb/hwa-rc.c:hwarc_disconnect()/ +takes time of tearing everything down safely (or not...). + + + On the air: beacons and enumerating the radio neighborhood + +So assuming we have devices and we have agreed for a channel to connect +on (let's say 9), we put the new RC to beacon: + + * + + $ echo 9 0 > /sys/class/uwb_rc/uwb0/beacon + +Now it is visible. If there were other devices in the same radio channel +and beacon group (that's what the zero is for), the dongle's radio +control interface will send beacon notifications on its +notification/event endpoint (NEEP). The beacon notifications are part of +the event stream that is funneled into the API with +/drivers/uwb/neh.c:uwb_rc_neh_grok()/ and delivered to the UWBD, the UWB +daemon through a notification list. + +UWBD wakes up and scans the event list; finds a beacon and adds it to +the BEACON CACHE (/uwb_beca/). If he receives a number of beacons from +the same device, he considers it to be 'onair' and creates a new device +[/drivers/uwb/lc-dev.c:uwbd_dev_onair()/]. Similarly, when no beacons +are received in some time, the device is considered gone and wiped out +[uwbd calls periodically /uwb/beacon.c:uwb_beca_purge()/ that will purge +the beacon cache of dead devices]. + + + Device lists + +All UWB devices are kept in the list of the struct bus_type uwb_bus. + + + Bandwidth allocation + +The UWB stack maintains a local copy of DRP availability through +processing of incoming *DRP Availability Change* notifications. This +local copy is currently used to present the current bandwidth +availability to the user through the sysfs file +/sys/class/uwb_rc/uwbx/bw_avail. In the future the bandwidth +availability information will be used by the bandwidth reservation +routines. + +The bandwidth reservation routines are in progress and are thus not +present in the current release. When completed they will enable a user +to initiate DRP reservation requests through interaction with sysfs. DRP +reservation requests from remote UWB devices will also be handled. The +bandwidth management done by the UWB stack will include callbacks to the +higher layers will enable the higher layers to use the reservations upon +completion. [Note: The bandwidth reservation work is in progress and +subject to change.] + + + Wireless USB Host Controller drivers + +*WARNING* This section needs a lot of work! + +As explained above, there are three different types of HCs in the WUSB +world: HWA-HC, DWA-HC and WHCI-HC. + +HWA-HC and DWA-HC share that they are Wire-Adapters (USB or WUSB +connected controllers), and their transfer management system is almost +identical. So is their notification delivery system. + +HWA-HC and WHCI-HC share that they are both WUSB host controllers, so +they have to deal with WUSB device life cycle and maintenance, wireless +root-hub + +HWA exposes a Host Controller interface (HWA-HC 0xe0/02/02). This has +three endpoints (Notifications, Data Transfer In and Data Transfer +Out--known as NEP, DTI and DTO in the code). + +We reserve UWB bandwidth for our Wireless USB Cluster, create a Cluster +ID and tell the HC to use all that. Then we start it. This means the HC +starts sending MMCs. + + * + + The MMCs are blocks of data defined somewhere in the WUSB1.0 spec + that define a stream in the UWB channel time allocated for sending + WUSB IEs (host to device commands/notifications) and Device + Notifications (device initiated to host). Each host defines a + unique Wireless USB cluster through MMCs. Devices can connect to a + single cluster at the time. The IEs are Information Elements, and + among them are the bandwidth allocations that tell each device + when can they transmit or receive. + +Now it all depends on external stimuli. + +*New device connection* + +A new device pops up, it scans the radio looking for MMCs that give out +the existence of Wireless USB channels. Once one (or more) are found, +selects which one to connect to. Sends a /DN_Connect/ (device +notification connect) during the DNTS (Device Notification Time +Slot--announced in the MMCs + +HC picks the /DN_Connect/ out (nep module sends to notif.c for delivery +into /devconnect/). This process starts the authentication process for +the device. First we allocate a /fake port/ and assign an +unauthenticated address (128 to 255--what we really do is +0x80 | fake_port_idx). We fiddle with the fake port status and /khubd/ +sees a new connection, so he moves on to enable the fake port with a reset. + +So now we are in the reset path -- we know we have a non-yet enumerated +device with an unauthorized address; we ask user space to authenticate +(FIXME: not yet done, similar to bluetooth pairing), then we do the key +exchange (FIXME: not yet done) and issue a /set address 0/ to bring the +device to the default state. Device is authenticated. + +From here, the USB stack takes control through the usb_hcd ops. khubd +has seen the port status changes, as we have been toggling them. It will +start enumerating and doing transfers through usb_hcd->urb_enqueue() to +read descriptors and move our data. + +*Device life cycle and keep alives* + +Everytime there is a succesful transfer to/from a device, we update a +per-device activity timestamp. If not, every now and then we check and +if the activity timestamp gets old, we ping the device by sending it a +Keep Alive IE; it responds with a /DN_Alive/ pong during the DNTS (this +arrives to us as a notification through +devconnect.c:wusb_handle_dn_alive(). If a device times out, we +disconnect it from the system (cleaning up internal information and +toggling the bits in the fake hub port, which kicks khubd into removing +the rest of the stuff). + +This is done through devconnect:__wusb_check_devs(), which will scan the +device list looking for whom needs refreshing. + +If the device wants to disconnect, it will either die (ugly) or send a +/DN_Disconnect/ that will prompt a disconnection from the system. + +*Sending and receiving data* + +Data is sent and received through /Remote Pipes/ (rpipes). An rpipe is +/aimed/ at an endpoint in a WUSB device. This is the same for HWAs and +DWAs. + +Each HC has a number of rpipes and buffers that can be assigned to them; +when doing a data transfer (xfer), first the rpipe has to be aimed and +prepared (buffers assigned), then we can start queueing requests for +data in or out. + +Data buffers have to be segmented out before sending--so we send first a +header (segment request) and then if there is any data, a data buffer +immediately after to the DTI interface (yep, even the request). If our +buffer is bigger than the max segment size, then we just do multiple +requests. + +[This sucks, because doing USB scatter gatter in Linux is resource +intensive, if any...not that the current approach is not. It just has to +be cleaned up a lot :)]. + +If reading, we don't send data buffers, just the segment headers saying +we want to read segments. + +When the xfer is executed, we receive a notification that says data is +ready in the DTI endpoint (handled through +xfer.c:wa_handle_notif_xfer()). In there we read from the DTI endpoint a +descriptor that gives us the status of the transfer, its identification +(given when we issued it) and the segment number. If it was a data read, +we issue another URB to read into the destination buffer the chunk of +data coming out of the remote endpoint. Done, wait for the next guy. The +callbacks for the URBs issued from here are the ones that will declare +the xfer complete at some point and call it's callback. + +Seems simple, but the implementation is not trivial. + + * + + *WARNING* Old!! + +The main xfer descriptor, wa_xfer (equivalent to a URB) contains an +array of segments, tallys on segments and buffers and callback +information. Buried in there is a lot of URBs for executing the segments +and buffer transfers. + +For OUT xfers, there is an array of segments, one URB for each, another +one of buffer URB. When submitting, we submit URBs for segment request +1, buffer 1, segment 2, buffer 2...etc. Then we wait on the DTI for xfer +result data; when all the segments are complete, we call the callback to +finalize the transfer. + +For IN xfers, we only issue URBs for the segments we want to read and +then wait for the xfer result data. + +*URB mapping into xfers* + +This is done by hwahc_op_urb_[en|de]queue(). In enqueue() we aim an +rpipe to the endpoint where we have to transmit, create a transfer +context (wa_xfer) and submit it. When the xfer is done, our callback is +called and we assign the status bits and release the xfer resources. + +In dequeue() we are basically cancelling/aborting the transfer. We issue +a xfer abort request to the HC, cancell all the URBs we had submitted +and not yet done and when all that is done, the xfer callback will be +called--this will call the URB callback. + + + Glossary + +*DWA* -- Device Wire Adapter + +USB host, wired for downstream devices, upstream connects wirelessly +with Wireless USB. + +*EVENT* -- Response to a command on the NEEP + +*HWA* -- Host Wire Adapter / USB dongle for UWB and Wireless USB + +*NEH* -- Notification/Event Handle + +Handle/file descriptor for receiving notifications or events. The WA +code requires you to get one of this to listen for notifications or +events on the NEEP. + +*NEEP* -- Notification/Event EndPoint + +Stuff related to the management of the first endpoint of a HWA USB +dongle that is used to deliver an stream of events and notifications to +the host. + +*NOTIFICATION* -- Message coming in the NEEP as response to something. + +*RC* -- Radio Control + +Design-overview.txt-1.8 (last edited 2006-11-04 12:22:24 by +InakyPerezGonzalez) + diff --git a/Documentation/usb/wusb-cbaf b/Documentation/usb/wusb-cbaf new file mode 100644 index 000000000000..2e78b70f3adc --- /dev/null +++ b/Documentation/usb/wusb-cbaf @@ -0,0 +1,139 @@ +#! /bin/bash +# + +set -e + +progname=$(basename $0) +function help +{ + cat <<EOF +Usage: $progname COMMAND DEVICEs [ARGS] + +Command for manipulating the pairing/authentication credentials of a +Wireless USB device that supports wired-mode Cable-Based-Association. + +Works in conjunction with the wusb-cba.ko driver from http://linuxuwb.org. + + +DEVICE + + sysfs path to the device to authenticate; for example, both this + guys are the same: + + /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-4/1-4.4/1-4.4:1.1 + /sys/bus/usb/drivers/wusb-cbaf/1-4.4:1.1 + +COMMAND/ARGS are + + start + + Start a WUSB host controller (by setting up a CHID) + + set-chid DEVICE HOST-CHID HOST-BANDGROUP HOST-NAME + + Sets host information in the device; after this you can call the + get-cdid to see how does this device report itself to us. + + get-cdid DEVICE + + Get the device ID associated to the HOST-CHDI we sent with + 'set-chid'. We might not know about it. + + set-cc DEVICE + + If we allow the device to connect, set a random new CDID and CK + (connection key). Device saves them for the next time it wants to + connect wireless. We save them for that next time also so we can + authenticate the device (when we see the CDID he uses to id + itself) and the CK to crypto talk to it. + +CHID is always 16 hex bytes in 'XX YY ZZ...' form +BANDGROUP is almost always 0001 + +Examples: + + You can default most arguments to '' to get a sane value: + + $ $progname set-chid '' '' '' "My host name" + + A full sequence: + + $ $progname set-chid '' '' '' "My host name" + $ $progname get-cdid '' + $ $progname set-cc '' + +EOF +} + + +# Defaults +# FIXME: CHID should come from a database :), band group from the host +host_CHID="00 11 22 33 44 55 66 77 88 99 aa bb cc dd ee ff" +host_band_group="0001" +host_name=$(hostname) + +devs="$(echo /sys/bus/usb/drivers/wusb-cbaf/[0-9]*)" +hdevs="$(for h in /sys/class/uwb_rc/*/wusbhc; do readlink -f $h; done)" + +result=0 +case $1 in + start) + for dev in ${2:-$hdevs} + do + uwb_rc=$(readlink -f $dev/uwb_rc) + if cat $uwb_rc/beacon | grep -q -- "-1" + then + echo 13 0 > $uwb_rc/beacon + echo I: started beaconing on ch 13 on $(basename $uwb_rc) >&2 + fi + echo $host_CHID > $dev/wusb_chid + echo I: started host $(basename $dev) >&2 + done + ;; + stop) + for dev in ${2:-$hdevs} + do + echo 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 > $dev/wusb_chid + echo I: stopped host $(basename $dev) >&2 + uwb_rc=$(readlink -f $dev/uwb_rc) + echo -1 | cat > $uwb_rc/beacon + echo I: stopped beaconing on $(basename $uwb_rc) >&2 + done + ;; + set-chid) + shift + for dev in ${2:-$devs}; do + echo "${4:-$host_name}" > $dev/wusb_host_name + echo "${3:-$host_band_group}" > $dev/wusb_host_band_groups + echo ${2:-$host_CHID} > $dev/wusb_chid + done + ;; + get-cdid) + for dev in ${2:-$devs} + do + cat $dev/wusb_cdid + done + ;; + set-cc) + for dev in ${2:-$devs}; do + shift + CDID="$(head --bytes=16 /dev/urandom | od -tx1 -An)" + CK="$(head --bytes=16 /dev/urandom | od -tx1 -An)" + echo "$CDID" > $dev/wusb_cdid + echo "$CK" > $dev/wusb_ck + + echo I: CC set >&2 + echo "CHID: $(cat $dev/wusb_chid)" + echo "CDID:$CDID" + echo "CK: $CK" + done + ;; + help|h|--help|-h) + help + ;; + *) + echo "E: Unknown usage" 1>&2 + help 1>&2 + result=1 +esac +exit $result diff --git a/MAINTAINERS b/MAINTAINERS index 57ed36d474aa..277451a52695 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1053,6 +1053,12 @@ L: cbe-oss-dev@ozlabs.org W: http://www.ibm.com/developerworks/power/cell/ S: Supported +CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM: +P: David Vrabel +M: david.vrabel@csr.com +L: linux-usb@vger.kernel.org +S: Supported + CFAG12864B LCD DRIVER P: Miguel Ojeda Sandonis M: miguel.ojeda.sandonis@gmail.com @@ -2182,6 +2188,13 @@ M: maciej.sosnowski@intel.com L: linux-kernel@vger.kernel.org S: Supported +INTEL IOMMU (VT-d) +P: David Woodhouse +M: dwmw2@infradead.org +L: iommu@lists.linux-foundation.org +T: git://git.infradead.org/iommu-2.6.git +S: Supported + INTEL IOP-ADMA DMA DRIVER P: Dan Williams M: dan.j.williams@intel.com @@ -2934,9 +2947,9 @@ S: Maintained NETEFFECT IWARP RNIC DRIVER (IW_NES) P: Faisal Latif -M: flatif@neteffect.com +M: faisal.latif@intel.com P: Chien Tung -M: ctung@neteffect.com +M: chien.tin.tung@intel.com L: general@lists.openfabrics.org W: http://www.neteffect.com S: Supported @@ -3255,11 +3268,6 @@ L: linux-pci@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git S: Supported -PCI HOTPLUG CORE -P: Kristen Carlson Accardi -M: kristen.c.accardi@intel.com -S: Supported - PCIE HOTPLUG DRIVER P: Kristen Carlson Accardi M: kristen.c.accardi@intel.com @@ -4202,6 +4210,12 @@ L: sparclinux@vger.kernel.org T: git kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6.git S: Maintained +ULTRA-WIDEBAND (UWB) SUBSYSTEM: +P: David Vrabel +M: david.vrabel@csr.com +L: linux-usb@vger.kernel.org +S: Supported + UNIFORM CDROM DRIVER P: Jens Axboe M: axboe@kernel.dk @@ -4627,6 +4641,11 @@ M: zaga@fly.cc.fer.hr L: linux-scsi@vger.kernel.org S: Maintained +WIMEDIA LLC PROTOCOL (WLP) SUBSYSTEM +P: David Vrabel +M: david.vrabel@csr.com +S: Maintained + WISTRON LAPTOP BUTTON DRIVER P: Miloslav Trmac M: mitr@volny.cz diff --git a/arch/alpha/oprofile/common.c b/arch/alpha/oprofile/common.c index 7c3d5ec6ec67..bd8ac533a504 100644 --- a/arch/alpha/oprofile/common.c +++ b/arch/alpha/oprofile/common.c @@ -106,7 +106,7 @@ op_axp_stop(void) } static int -op_axp_create_files(struct super_block * sb, struct dentry * root) +op_axp_create_files(struct super_block *sb, struct dentry *root) { int i; diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index df39d20f7425..f504c801792f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -356,7 +356,7 @@ config ARCH_IXP4XX select GENERIC_GPIO select GENERIC_TIME select GENERIC_CLOCKEVENTS - select ZONE_DMA if PCI + select DMABOUNCE if PCI help Support for Intel's IXP4XX (XScale) family of processors. @@ -1256,6 +1256,8 @@ source "drivers/hid/Kconfig" source "drivers/usb/Kconfig" +source "drivers/uwb/Kconfig" + source "drivers/mmc/Kconfig" source "drivers/memstick/Kconfig" diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index 2e32acca02fb..86b5e6982660 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -13,10 +13,10 @@ config ICST307 config SA1111 bool select DMABOUNCE if !ARCH_PXA - select ZONE_DMA if !ARCH_PXA config DMABOUNCE bool + select ZONE_DMA config TIMER_ACORN bool diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c index fb86f248aab8..47ccec95f3e8 100644 --- a/arch/arm/common/sa1111.c +++ b/arch/arm/common/sa1111.c @@ -581,6 +581,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent, goto out; } +#ifdef CONFIG_DMABOUNCE /* * If the parent device has a DMA mask associated with it, * propagate it down to the children. @@ -598,6 +599,7 @@ sa1111_init_one_child(struct sa1111 *sachip, struct resource *parent, } } } +#endif out: return ret; @@ -937,7 +939,7 @@ static int sa1111_resume(struct platform_device *dev) #define sa1111_resume NULL #endif -static int sa1111_probe(struct platform_device *pdev) +static int __devinit sa1111_probe(struct platform_device *pdev) { struct resource *mem; int irq; diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig index 8b7a431a8bfc..9033d147f052 100644 --- a/arch/arm/configs/trizeps4_defconfig +++ b/arch/arm/configs/trizeps4_defconfig @@ -147,6 +147,7 @@ CONFIG_ARCH_PXA=y # CONFIG_MACH_MAINSTONE is not set # CONFIG_ARCH_PXA_IDP is not set # CONFIG_PXA_SHARPSL is not set +CONFIG_TRIZEPS_PXA=y CONFIG_MACH_TRIZEPS4=y CONFIG_MACH_TRIZEPS4_CONXS=y # CONFIG_MACH_TRIZEPS4_ANY is not set diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h index 71c2fa70c8e8..98ec30c97bbe 100644 --- a/arch/arm/mach-clps711x/include/mach/memory.h +++ b/arch/arm/mach-clps711x/include/mach/memory.h @@ -89,6 +89,8 @@ * node 3: 0xd8000000 - 0xdfffffff */ #define NODE_MEM_SIZE_BITS 24 +#define SECTION_SIZE_BITS 24 +#define MAX_PHYSMEM_BITS 32 #endif diff --git a/arch/arm/mach-ixp4xx/Kconfig b/arch/arm/mach-ixp4xx/Kconfig index db8b5fe06c0d..2c5a02b8520e 100644 --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig @@ -167,11 +167,6 @@ config MACH_GTWX5715 comment "IXP4xx Options" -config DMABOUNCE - bool - default y - depends on PCI - config IXP4XX_INDIRECT_PCI bool "Use indirect PCI memory access" depends on PCI diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 85cad05d8c5b..0bb1fbd84ccb 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -16,6 +16,7 @@ #include <linux/mv643xx_eth.h> #include <linux/ata_platform.h> #include <linux/spi/orion_spi.h> +#include <net/dsa.h> #include <asm/page.h> #include <asm/timex.h> #include <asm/mach/map.h> @@ -152,6 +153,40 @@ void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data) /***************************************************************************** + * Ethernet switch + ****************************************************************************/ +static struct resource kirkwood_switch_resources[] = { + { + .start = 0, + .end = 0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device kirkwood_switch_device = { + .name = "dsa", + .id = 0, + .num_resources = 0, + .resource = kirkwood_switch_resources, +}; + +void __init kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq) +{ + if (irq != NO_IRQ) { + kirkwood_switch_resources[0].start = irq; + kirkwood_switch_resources[0].end = irq; + kirkwood_switch_device.num_resources = 1; + } + + d->mii_bus = &kirkwood_ge00_shared.dev; + d->netdev = &kirkwood_ge00.dev; + kirkwood_switch_device.dev.platform_data = d; + + platform_device_register(&kirkwood_switch_device); +} + + +/***************************************************************************** * SoC RTC ****************************************************************************/ static struct resource kirkwood_rtc_resource = { diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 8fa0f6a27635..5774632a67e3 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -11,6 +11,7 @@ #ifndef __ARCH_KIRKWOOD_COMMON_H #define __ARCH_KIRKWOOD_COMMON_H +struct dsa_platform_data; struct mv643xx_eth_platform_data; struct mv_sata_platform_data; @@ -29,6 +30,7 @@ void kirkwood_pcie_id(u32 *dev, u32 *rev); void kirkwood_ehci_init(void); void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data); +void kirkwood_ge00_switch_init(struct dsa_platform_data *d, int irq); void kirkwood_pcie_init(void); void kirkwood_rtc_init(void); void kirkwood_sata_init(struct mv_sata_platform_data *sata_data); diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index f785093e433f..175054abd630 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -19,6 +19,7 @@ #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> +#include <net/dsa.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> @@ -74,6 +75,15 @@ static struct mv643xx_eth_platform_data rd88f6281_ge00_data = { .duplex = DUPLEX_FULL, }; +static struct dsa_platform_data rd88f6281_switch_data = { + .port_names[0] = "lan1", + .port_names[1] = "lan2", + .port_names[2] = "lan3", + .port_names[3] = "lan4", + .port_names[4] = "wan", + .port_names[5] = "cpu", +}; + static struct mv_sata_platform_data rd88f6281_sata_data = { .n_ports = 2, }; @@ -87,6 +97,7 @@ static void __init rd88f6281_init(void) kirkwood_ehci_init(); kirkwood_ge00_init(&rd88f6281_ge00_data); + kirkwood_ge00_switch_init(&rd88f6281_switch_data, NO_IRQ); kirkwood_rtc_init(); kirkwood_sata_init(&rd88f6281_sata_data); kirkwood_uart0_init(); diff --git a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c index 49f434c39eb7..2e285bbb7bbd 100644 --- a/arch/arm/mach-mv78xx0/db78x00-bp-setup.c +++ b/arch/arm/mach-mv78xx0/db78x00-bp-setup.c @@ -13,6 +13,7 @@ #include <linux/platform_device.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> +#include <linux/ethtool.h> #include <mach/mv78xx0.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -28,10 +29,14 @@ static struct mv643xx_eth_platform_data db78x00_ge01_data = { static struct mv643xx_eth_platform_data db78x00_ge10_data = { .phy_addr = MV643XX_ETH_PHY_NONE, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, }; static struct mv643xx_eth_platform_data db78x00_ge11_data = { .phy_addr = MV643XX_ETH_PHY_NONE, + .speed = SPEED_1000, + .duplex = DUPLEX_FULL, }; static struct mv_sata_platform_data db78x00_sata_data = { diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 9625ef5975d0..437065c25c9c 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -19,6 +19,7 @@ #include <linux/mv643xx_i2c.h> #include <linux/ata_platform.h> #include <linux/spi/orion_spi.h> +#include <net/dsa.h> #include <asm/page.h> #include <asm/setup.h> #include <asm/timex.h> @@ -198,6 +199,40 @@ void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data) /***************************************************************************** + * Ethernet switch + ****************************************************************************/ +static struct resource orion5x_switch_resources[] = { + { + .start = 0, + .end = 0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device orion5x_switch_device = { + .name = "dsa", + .id = 0, + .num_resources = 0, + .resource = orion5x_switch_resources, +}; + +void __init orion5x_eth_switch_init(struct dsa_platform_data *d, int irq) +{ + if (irq != NO_IRQ) { + orion5x_switch_resources[0].start = irq; + orion5x_switch_resources[0].end = irq; + orion5x_switch_device.num_resources = 1; + } + + d->mii_bus = &orion5x_eth_shared.dev; + d->netdev = &orion5x_eth.dev; + orion5x_switch_device.dev.platform_data = d; + + platform_device_register(&orion5x_switch_device); +} + + +/***************************************************************************** * I2C ****************************************************************************/ static struct mv64xxx_i2c_pdata orion5x_i2c_pdata = { @@ -275,7 +310,8 @@ void __init orion5x_sata_init(struct mv_sata_platform_data *sata_data) * SPI ****************************************************************************/ static struct orion_spi_info orion5x_spi_plat_data = { - .tclk = 0, + .tclk = 0, + .enable_clock_fix = 1, }; static struct resource orion5x_spi_resources[] = { diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index 1f8b2da676a5..a000c7c6ee96 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -1,6 +1,7 @@ #ifndef __ARCH_ORION5X_COMMON_H #define __ARCH_ORION5X_COMMON_H +struct dsa_platform_data; struct mv643xx_eth_platform_data; struct mv_sata_platform_data; @@ -29,6 +30,7 @@ void orion5x_setup_pcie_wa_win(u32 base, u32 size); void orion5x_ehci0_init(void); void orion5x_ehci1_init(void); void orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data); +void orion5x_eth_switch_init(struct dsa_platform_data *d, int irq); void orion5x_i2c_init(void); void orion5x_sata_init(struct mv_sata_platform_data *sata_data); void orion5x_spi_init(void); diff --git a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c index 500cdadaf09c..15f53235ee30 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c @@ -16,6 +16,7 @@ #include <linux/mtd/physmap.h> #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> +#include <net/dsa.h> #include <asm/mach-types.h> #include <asm/gpio.h> #include <asm/leds.h> @@ -93,6 +94,15 @@ static struct mv643xx_eth_platform_data rd88f5181l_fxo_eth_data = { .duplex = DUPLEX_FULL, }; +static struct dsa_platform_data rd88f5181l_fxo_switch_data = { + .port_names[0] = "lan2", + .port_names[1] = "lan1", + .port_names[2] = "wan", + .port_names[3] = "cpu", + .port_names[5] = "lan4", + .port_names[7] = "lan3", +}; + static void __init rd88f5181l_fxo_init(void) { /* @@ -107,6 +117,7 @@ static void __init rd88f5181l_fxo_init(void) */ orion5x_ehci0_init(); orion5x_eth_init(&rd88f5181l_fxo_eth_data); + orion5x_eth_switch_init(&rd88f5181l_fxo_switch_data, NO_IRQ); orion5x_uart0_init(); orion5x_setup_dev_boot_win(RD88F5181L_FXO_NOR_BOOT_BASE, diff --git a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c index ebde81416499..8ad3934399d4 100644 --- a/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f5181l-ge-setup.c @@ -17,6 +17,7 @@ #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> #include <linux/i2c.h> +#include <net/dsa.h> #include <asm/mach-types.h> #include <asm/gpio.h> #include <asm/leds.h> @@ -94,6 +95,15 @@ static struct mv643xx_eth_platform_data rd88f5181l_ge_eth_data = { .duplex = DUPLEX_FULL, }; +static struct dsa_platform_data rd88f5181l_ge_switch_data = { + .port_names[0] = "lan2", + .port_names[1] = "lan1", + .port_names[2] = "wan", + .port_names[3] = "cpu", + .port_names[5] = "lan4", + .port_names[7] = "lan3", +}; + static struct i2c_board_info __initdata rd88f5181l_ge_i2c_rtc = { I2C_BOARD_INFO("ds1338", 0x68), }; @@ -112,6 +122,7 @@ static void __init rd88f5181l_ge_init(void) */ orion5x_ehci0_init(); orion5x_eth_init(&rd88f5181l_ge_eth_data); + orion5x_eth_switch_init(&rd88f5181l_ge_switch_data, gpio_to_irq(8)); orion5x_i2c_init(); orion5x_uart0_init(); diff --git a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c index 40e049539091..262e25e4dace 100644 --- a/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c +++ b/arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c @@ -19,6 +19,7 @@ #include <linux/spi/orion_spi.h> #include <linux/spi/flash.h> #include <linux/ethtool.h> +#include <net/dsa.h> #include <asm/mach-types.h> #include <asm/gpio.h> #include <asm/leds.h> @@ -34,6 +35,15 @@ static struct mv643xx_eth_platform_data rd88f6183ap_ge_eth_data = { .duplex = DUPLEX_FULL, }; +static struct dsa_platform_data rd88f6183ap_ge_switch_data = { + .port_names[0] = "lan1", + .port_names[1] = "lan2", + .port_names[2] = "lan3", + .port_names[3] = "lan4", + .port_names[4] = "wan", + .port_names[5] = "cpu", +}; + static struct mtd_partition rd88f6183ap_ge_partitions[] = { { .name = "kernel", @@ -79,6 +89,7 @@ static void __init rd88f6183ap_ge_init(void) */ orion5x_ehci0_init(); orion5x_eth_init(&rd88f6183ap_ge_eth_data); + orion5x_eth_switch_init(&rd88f6183ap_ge_switch_data, gpio_to_irq(3)); spi_register_board_info(rd88f6183ap_ge_spi_slave_info, ARRAY_SIZE(rd88f6183ap_ge_spi_slave_info)); orion5x_spi_init(); diff --git a/arch/arm/mach-orion5x/wrt350n-v2-setup.c b/arch/arm/mach-orion5x/wrt350n-v2-setup.c index 9a4fd5256462..cc8f89200865 100644 --- a/arch/arm/mach-orion5x/wrt350n-v2-setup.c +++ b/arch/arm/mach-orion5x/wrt350n-v2-setup.c @@ -15,6 +15,7 @@ #include <linux/mtd/physmap.h> #include <linux/mv643xx_eth.h> #include <linux/ethtool.h> +#include <net/dsa.h> #include <asm/mach-types.h> #include <asm/gpio.h> #include <asm/mach/arch.h> @@ -105,6 +106,15 @@ static struct mv643xx_eth_platform_data wrt350n_v2_eth_data = { .duplex = DUPLEX_FULL, }; +static struct dsa_platform_data wrt350n_v2_switch_data = { + .port_names[0] = "lan2", + .port_names[1] = "lan1", + .port_names[2] = "wan", + .port_names[3] = "cpu", + .port_names[5] = "lan3", + .port_names[7] = "lan4", +}; + static void __init wrt350n_v2_init(void) { /* @@ -119,6 +129,7 @@ static void __init wrt350n_v2_init(void) */ orion5x_ehci0_init(); orion5x_eth_init(&wrt350n_v2_eth_data); + orion5x_eth_switch_init(&wrt350n_v2_switch_data, NO_IRQ); orion5x_uart0_init(); orion5x_setup_dev_boot_win(WRT350N_V2_NOR_BOOT_BASE, diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index f27f6b3d6e6f..f781873431f3 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -257,7 +257,6 @@ config MACH_ARMCORE bool "CompuLab CM-X255/CM-X270 modules" select PXA27x select IWMMXT - select ZONE_DMA if PCI select PXA25x select PXA_SSP diff --git a/arch/arm/mach-pxa/include/mach/irqs.h b/arch/arm/mach-pxa/include/mach/irqs.h index 9c163e19ada9..32bb4a2eb7f1 100644 --- a/arch/arm/mach-pxa/include/mach/irqs.h +++ b/arch/arm/mach-pxa/include/mach/irqs.h @@ -9,7 +9,8 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ - +#ifndef __ASM_MACH_IRQS_H +#define __ASM_MACH_IRQS_H #ifdef CONFIG_PXA_HAVE_ISA_IRQS #define PXA_ISA_IRQ(x) (x) @@ -264,3 +265,5 @@ #endif #endif /* CONFIG_PCI_HOST_ITE8152 */ + +#endif /* __ASM_MACH_IRQS_H */ diff --git a/arch/arm/mach-pxa/include/mach/spitz.h b/arch/arm/mach-pxa/include/mach/spitz.h index 31ac26b55bc1..e8488dfb7e91 100644 --- a/arch/arm/mach-pxa/include/mach/spitz.h +++ b/arch/arm/mach-pxa/include/mach/spitz.h @@ -142,7 +142,7 @@ #define SPITZ_SCP2_GPIO_BASE (NR_BUILTIN_GPIO + 12) #define SPITZ_GPIO_IR_ON (SPITZ_SCP2_GPIO_BASE + 0) -#define SPITZ_GPIO_AKIN_PULLUP (SPITZ_SCP2_GPIO_BASE + 1 +#define SPITZ_GPIO_AKIN_PULLUP (SPITZ_SCP2_GPIO_BASE + 1) #define SPITZ_GPIO_RESERVED_1 (SPITZ_SCP2_GPIO_BASE + 2) #define SPITZ_GPIO_RESERVED_2 (SPITZ_SCP2_GPIO_BASE + 3) #define SPITZ_GPIO_RESERVED_3 (SPITZ_SCP2_GPIO_BASE + 4) diff --git a/arch/arm/mach-pxa/pwm.c b/arch/arm/mach-pxa/pwm.c index 316cd986da5c..74e2ead8cee8 100644 --- a/arch/arm/mach-pxa/pwm.c +++ b/arch/arm/mach-pxa/pwm.c @@ -60,7 +60,7 @@ int pwm_config(struct pwm_device *pwm, int duty_ns, int period_ns) do_div(c, 1000000000); period_cycles = c; - if (period_cycles < 0) + if (period_cycles < 1) period_cycles = 1; prescale = (period_cycles - 1) / 1024; pv = period_cycles / (prescale + 1) - 1; diff --git a/arch/arm/mach-pxa/trizeps4.c b/arch/arm/mach-pxa/trizeps4.c index a13dbf3c2c05..a72e3add743c 100644 --- a/arch/arm/mach-pxa/trizeps4.c +++ b/arch/arm/mach-pxa/trizeps4.c @@ -399,7 +399,7 @@ static void trizeps4_irda_transceiver_mode(struct device *dev, int mode) /* Switch mode */ if (mode & IR_SIRMODE) trizeps_conxs_ircr &= ~ConXS_IRCR_MODE; /* Slow mode */ - else if (mode & IR_FIRMODE) { + else if (mode & IR_FIRMODE) trizeps_conxs_ircr |= ConXS_IRCR_MODE; /* Fast mode */ /* Switch power */ diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index 2f60bf6b8d43..f854e7385e3c 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -1033,8 +1033,7 @@ void __init s3c2443_init_clocks(int xtal) fclk = pll / s3c2443_fclk_div(clkdiv0); hclk = s3c2443_prediv_getrate(&clk_prediv); - hclk = hclk / s3c2443_get_hdiv(clkdiv0); - hclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_HCLK) ? 2 : 1); + hclk /= s3c2443_get_hdiv(clkdiv0); pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1); s3c24xx_setup_clocks(xtal, fclk, hclk, pclk); diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S index 33926c9fcda6..5786adf10040 100644 --- a/arch/arm/mm/cache-v4.S +++ b/arch/arm/mm/cache-v4.S @@ -29,7 +29,7 @@ ENTRY(v4_flush_user_cache_all) * Clean and invalidate the entire cache. */ ENTRY(v4_flush_kern_cache_all) -#ifdef CPU_CP15 +#ifdef CONFIG_CPU_CP15 mov r0, #0 mcr p15, 0, r0, c7, c7, 0 @ flush ID cache mov pc, lr @@ -48,7 +48,7 @@ ENTRY(v4_flush_kern_cache_all) * - flags - vma_area_struct flags describing address space */ ENTRY(v4_flush_user_cache_range) -#ifdef CPU_CP15 +#ifdef CONFIG_CPU_CP15 mov ip, #0 mcreq p15, 0, ip, c7, c7, 0 @ flush ID cache mov pc, lr @@ -116,7 +116,7 @@ ENTRY(v4_dma_inv_range) * - end - virtual end address */ ENTRY(v4_dma_flush_range) -#ifdef CPU_CP15 +#ifdef CONFIG_CPU_CP15 mov r0, #0 mcr p15, 0, r0, c7, c7, 0 @ flush ID cache #endif diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c24xx/pwm-clock.c index b8e854f1b1d5..3fad68a1e6bc 100644 --- a/arch/arm/plat-s3c24xx/pwm-clock.c +++ b/arch/arm/plat-s3c24xx/pwm-clock.c @@ -315,7 +315,7 @@ static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent) if (parent == s3c24xx_pwmclk_tclk(id)) bits = S3C2410_TCFG1_MUX_TCLK << shift; else if (parent == s3c24xx_pwmclk_tdiv(id)) - bits = clk_pwm_tdiv_bits(to_tdiv(clk)) << shift; + bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift; else return -EINVAL; diff --git a/arch/arm/plat-s3c24xx/pwm.c b/arch/arm/plat-s3c24xx/pwm.c index feb770f2e84e..ec56b88866c4 100644 --- a/arch/arm/plat-s3c24xx/pwm.c +++ b/arch/arm/plat-s3c24xx/pwm.c @@ -56,7 +56,7 @@ static struct clk *clk_scaler[2]; } \ } -#define DEFINE_TIMER(_tmr_no, _irq) \ +#define DEFINE_S3C_TIMER(_tmr_no, _irq) \ .name = "s3c24xx-pwm", \ .id = _tmr_no, \ .num_resources = TIMER_RESOURCE_SIZE, \ @@ -67,11 +67,11 @@ static struct clk *clk_scaler[2]; */ struct platform_device s3c_device_timer[] = { - [0] = { DEFINE_TIMER(0, IRQ_TIMER0) }, - [1] = { DEFINE_TIMER(1, IRQ_TIMER1) }, - [2] = { DEFINE_TIMER(2, IRQ_TIMER2) }, - [3] = { DEFINE_TIMER(3, IRQ_TIMER3) }, - [4] = { DEFINE_TIMER(4, IRQ_TIMER4) }, + [0] = { DEFINE_S3C_TIMER(0, IRQ_TIMER0) }, + [1] = { DEFINE_S3C_TIMER(1, IRQ_TIMER1) }, + [2] = { DEFINE_S3C_TIMER(2, IRQ_TIMER2) }, + [3] = { DEFINE_S3C_TIMER(3, IRQ_TIMER3) }, + [4] = { DEFINE_S3C_TIMER(4, IRQ_TIMER4) }, }; static inline int pwm_is_tdiv(struct pwm_device *pwm) diff --git a/arch/cris/Kconfig b/arch/cris/Kconfig index 07335e719bf8..b17aeea8d620 100644 --- a/arch/cris/Kconfig +++ b/arch/cris/Kconfig @@ -679,6 +679,8 @@ source "fs/Kconfig" source "drivers/usb/Kconfig" +source "drivers/uwb/Kconfig" + source "arch/cris/Kconfig.debug" source "security/Kconfig" diff --git a/arch/h8300/Kconfig b/arch/h8300/Kconfig index bd1995403c67..28f06fd9b7b7 100644 --- a/arch/h8300/Kconfig +++ b/arch/h8300/Kconfig @@ -216,6 +216,8 @@ source "drivers/hwmon/Kconfig" source "drivers/usb/Kconfig" +source "drivers/uwb/Kconfig" + endmenu source "fs/Kconfig" diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig index 912c57db2d21..27eec71429b0 100644 --- a/arch/ia64/Kconfig +++ b/arch/ia64/Kconfig @@ -23,6 +23,7 @@ config IA64 select HAVE_KRETPROBES select HAVE_DMA_ATTRS select HAVE_KVM + select HAVE_ARCH_TRACEHOOK default y help The Itanium Processor Family is Intel's 64-bit successor to @@ -110,6 +111,33 @@ config AUDIT_ARCH bool default y +menuconfig PARAVIRT_GUEST + bool "Paravirtualized guest support" + help + Say Y here to get to see options related to running Linux under + various hypervisors. This option alone does not add any kernel code. + + If you say N, all options in this submenu will be skipped and disabled. + +if PARAVIRT_GUEST + +config PARAVIRT + bool "Enable paravirtualization code" + depends on PARAVIRT_GUEST + default y + bool + default y + help + This changes the kernel so it can modify itself when it is run + under a hypervisor, potentially improving performance significantly + over full virtualization. However, when run without a hypervisor + the kernel is theoretically slower and slightly larger. + + +source "arch/ia64/xen/Kconfig" + +endif + choice prompt "System type" default IA64_GENERIC @@ -119,6 +147,7 @@ config IA64_GENERIC select NUMA select ACPI_NUMA select SWIOTLB + select PCI_MSI help This selects the system type of your hardware. A "generic" kernel will run on any supported IA-64 system. However, if you configure @@ -126,11 +155,13 @@ config IA64_GENERIC generic For any supported IA-64 system DIG-compliant For DIG ("Developer's Interface Guide") compliant systems + DIG+Intel+IOMMU For DIG systems with Intel IOMMU HP-zx1/sx1000 For HP systems HP-zx1/sx1000+swiotlb For HP systems with (broken) DMA-constrained devices. SGI-SN2 For SGI Altix systems SGI-UV For SGI UV systems Ski-simulator For the HP simulator <http://www.hpl.hp.com/research/linux/ski/> + Xen-domU For xen domU system If you don't know what to do, choose "generic". @@ -138,6 +169,11 @@ config IA64_DIG bool "DIG-compliant" select SWIOTLB +config IA64_DIG_VTD + bool "DIG+Intel+IOMMU" + select DMAR + select PCI_MSI + config IA64_HP_ZX1 bool "HP-zx1/sx1000" help @@ -181,6 +217,10 @@ config IA64_HP_SIM bool "Ski-simulator" select SWIOTLB +config IA64_XEN_GUEST + bool "Xen guest" + depends on XEN + endchoice choice @@ -583,6 +623,16 @@ source "drivers/pci/hotplug/Kconfig" source "drivers/pcmcia/Kconfig" +config DMAR + bool "Support for DMA Remapping Devices (EXPERIMENTAL)" + depends on IA64_GENERIC && ACPI && EXPERIMENTAL + help + DMA remapping (DMAR) devices support enables independent address + translations for Direct Memory Access (DMA) from devices. + These DMA remapping devices are reported via ACPI tables + and include PCI device scope covered by these DMA + remapping devices. + endmenu endif diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile index 905d25b13d5a..58a7e46affda 100644 --- a/arch/ia64/Makefile +++ b/arch/ia64/Makefile @@ -53,12 +53,15 @@ libs-y += arch/ia64/lib/ core-y += arch/ia64/kernel/ arch/ia64/mm/ core-$(CONFIG_IA32_SUPPORT) += arch/ia64/ia32/ core-$(CONFIG_IA64_DIG) += arch/ia64/dig/ +core-$(CONFIG_IA64_DIG_VTD) += arch/ia64/dig/ core-$(CONFIG_IA64_GENERIC) += arch/ia64/dig/ core-$(CONFIG_IA64_HP_ZX1) += arch/ia64/dig/ core-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/dig/ +core-$(CONFIG_IA64_XEN_GUEST) += arch/ia64/dig/ core-$(CONFIG_IA64_SGI_SN2) += arch/ia64/sn/ core-$(CONFIG_IA64_SGI_UV) += arch/ia64/uv/ core-$(CONFIG_KVM) += arch/ia64/kvm/ +core-$(CONFIG_XEN) += arch/ia64/xen/ drivers-$(CONFIG_PCI) += arch/ia64/pci/ drivers-$(CONFIG_IA64_HP_SIM) += arch/ia64/hp/sim/ diff --git a/arch/ia64/configs/generic_defconfig b/arch/ia64/configs/generic_defconfig index 9f483976228f..e05f9e1d3faa 100644 --- a/arch/ia64/configs/generic_defconfig +++ b/arch/ia64/configs/generic_defconfig @@ -233,6 +233,8 @@ CONFIG_DMIID=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m +# CONFIG_DMAR is not set + # # Power management and ACPI # diff --git a/arch/ia64/configs/tiger_defconfig b/arch/ia64/configs/tiger_defconfig index 797acf9066c1..c522edf23c62 100644 --- a/arch/ia64/configs/tiger_defconfig +++ b/arch/ia64/configs/tiger_defconfig @@ -172,6 +172,8 @@ CONFIG_DMIID=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m +# CONFIG_DMAR is not set + # # Power management and ACPI # diff --git a/arch/ia64/dig/Makefile b/arch/ia64/dig/Makefile index 971cd7870dd4..5c0283830bd6 100644 --- a/arch/ia64/dig/Makefile +++ b/arch/ia64/dig/Makefile @@ -6,4 +6,9 @@ # obj-y := setup.o +ifeq ($(CONFIG_DMAR), y) +obj-$(CONFIG_IA64_GENERIC) += machvec.o machvec_vtd.o dig_vtd_iommu.o +else obj-$(CONFIG_IA64_GENERIC) += machvec.o +endif +obj-$(CONFIG_IA64_DIG_VTD) += dig_vtd_iommu.o diff --git a/arch/ia64/dig/dig_vtd_iommu.c b/arch/ia64/dig/dig_vtd_iommu.c new file mode 100644 index 000000000000..1c8a079017a3 --- /dev/null +++ b/arch/ia64/dig/dig_vtd_iommu.c @@ -0,0 +1,59 @@ +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/intel-iommu.h> + +void * +vtd_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, + gfp_t flags) +{ + return intel_alloc_coherent(dev, size, dma_handle, flags); +} +EXPORT_SYMBOL_GPL(vtd_alloc_coherent); + +void +vtd_free_coherent(struct device *dev, size_t size, void *vaddr, + dma_addr_t dma_handle) +{ + intel_free_coherent(dev, size, vaddr, dma_handle); +} +EXPORT_SYMBOL_GPL(vtd_free_coherent); + +dma_addr_t +vtd_map_single_attrs(struct device *dev, void *addr, size_t size, + int dir, struct dma_attrs *attrs) +{ + return intel_map_single(dev, (phys_addr_t)addr, size, dir); +} +EXPORT_SYMBOL_GPL(vtd_map_single_attrs); + +void +vtd_unmap_single_attrs(struct device *dev, dma_addr_t iova, size_t size, + int dir, struct dma_attrs *attrs) +{ + intel_unmap_single(dev, iova, size, dir); +} +EXPORT_SYMBOL_GPL(vtd_unmap_single_attrs); + +int +vtd_map_sg_attrs(struct device *dev, struct scatterlist *sglist, int nents, + int dir, struct dma_attrs *attrs) +{ + return intel_map_sg(dev, sglist, nents, dir); +} +EXPORT_SYMBOL_GPL(vtd_map_sg_attrs); + +void +vtd_unmap_sg_attrs(struct device *dev, struct scatterlist *sglist, + int nents, int dir, struct dma_attrs *attrs) +{ + intel_unmap_sg(dev, sglist, nents, dir); +} +EXPORT_SYMBOL_GPL(vtd_unmap_sg_attrs); + +int +vtd_dma_mapping_error(struct device *dev, dma_addr_t dma_addr) +{ + return 0; +} +EXPORT_SYMBOL_GPL(vtd_dma_mapping_error); diff --git a/arch/ia64/dig/machvec_vtd.c b/arch/ia64/dig/machvec_vtd.c new file mode 100644 index 000000000000..7cd3eb471cad --- /dev/null +++ b/arch/ia64/dig/machvec_vtd.c @@ -0,0 +1,3 @@ +#define MACHVEC_PLATFORM_NAME dig_vtd +#define MACHVEC_PLATFORM_HEADER <asm/machvec_dig_vtd.h> +#include <asm/machvec_init.h> diff --git a/arch/ia64/ia32/ia32_entry.S b/arch/ia64/ia32/ia32_entry.S index 53505bb04771..a8cf19958850 100644 --- a/arch/ia64/ia32/ia32_entry.S +++ b/arch/ia64/ia32/ia32_entry.S @@ -108,6 +108,11 @@ GLOBAL_ENTRY(ia32_trace_syscall) ;; st8 [r2]=r3 // initialize return code to -ENOSYS br.call.sptk.few rp=syscall_trace_enter // give parent a chance to catch syscall args + cmp.lt p6,p0=r8,r0 // check tracehook + adds r2=IA64_PT_REGS_R8_OFFSET+16,sp // r2 = &pt_regs.r8 + ;; +(p6) st8.spill [r2]=r8 // store return value in slot for r8 +(p6) br.spnt.few .ret4 .ret2: // Need to reload arguments (they may be changed by the tracing process) adds r2=IA64_PT_REGS_R1_OFFSET+16,sp // r2 = &pt_regs.r1 adds r3=IA64_PT_REGS_R13_OFFSET+16,sp // r3 = &pt_regs.r13 @@ -199,10 +204,10 @@ ia32_syscall_table: data8 sys_setuid /* 16-bit version */ data8 sys_getuid /* 16-bit version */ data8 compat_sys_stime /* 25 */ - data8 sys32_ptrace + data8 compat_sys_ptrace data8 sys32_alarm data8 sys_ni_syscall - data8 sys32_pause + data8 sys_pause data8 compat_sys_utime /* 30 */ data8 sys_ni_syscall /* old stty syscall holder */ data8 sys_ni_syscall /* old gtty syscall holder */ @@ -215,7 +220,7 @@ ia32_syscall_table: data8 sys_mkdir data8 sys_rmdir /* 40 */ data8 sys_dup - data8 sys32_pipe + data8 sys_pipe data8 compat_sys_times data8 sys_ni_syscall /* old prof syscall holder */ data8 sys32_brk /* 45 */ diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c index f4430bb4bbdc..5e92ae00bdbb 100644 --- a/arch/ia64/ia32/sys_ia32.c +++ b/arch/ia64/ia32/sys_ia32.c @@ -1098,21 +1098,6 @@ sys32_mremap (unsigned int addr, unsigned int old_len, unsigned int new_len, return ret; } -asmlinkage long -sys32_pipe (int __user *fd) -{ - int retval; - int fds[2]; - - retval = do_pipe_flags(fds, 0); - if (retval) - goto out; - if (copy_to_user(fd, fds, sizeof(fds))) - retval = -EFAULT; - out: - return retval; -} - asmlinkage unsigned long sys32_alarm (unsigned int seconds) { @@ -1209,25 +1194,6 @@ sys32_waitpid (int pid, unsigned int *stat_addr, int options) return compat_sys_wait4(pid, stat_addr, options, NULL); } -static unsigned int -ia32_peek (struct task_struct *child, unsigned long addr, unsigned int *val) -{ - size_t copied; - unsigned int ret; - - copied = access_process_vm(child, addr, val, sizeof(*val), 0); - return (copied != sizeof(ret)) ? -EIO : 0; -} - -static unsigned int -ia32_poke (struct task_struct *child, unsigned long addr, unsigned int val) -{ - - if (access_process_vm(child, addr, &val, sizeof(val), 1) != sizeof(val)) - return -EIO; - return 0; -} - /* * The order in which registers are stored in the ptrace regs structure */ @@ -1525,49 +1491,15 @@ restore_ia32_fpxstate (struct task_struct *tsk, struct ia32_user_fxsr_struct __u return 0; } -asmlinkage long -sys32_ptrace (int request, pid_t pid, unsigned int addr, unsigned int data) +long compat_arch_ptrace(struct task_struct *child, compat_long_t request, + compat_ulong_t caddr, compat_ulong_t cdata) { - struct task_struct *child; - unsigned int value, tmp; + unsigned long addr = caddr; + unsigned long data = cdata; + unsigned int tmp; long i, ret; - lock_kernel(); - if (request == PTRACE_TRACEME) { - ret = ptrace_traceme(); - goto out; - } - - child = ptrace_get_task_struct(pid); - if (IS_ERR(child)) { - ret = PTR_ERR(child); - goto out; - } - - if (request == PTRACE_ATTACH) { - ret = sys_ptrace(request, pid, addr, data); - goto out_tsk; - } - - ret = ptrace_check_attach(child, request == PTRACE_KILL); - if (ret < 0) - goto out_tsk; - switch (request) { - case PTRACE_PEEKTEXT: - case PTRACE_PEEKDATA: /* read word at location addr */ - ret = ia32_peek(child, addr, &value); - if (ret == 0) - ret = put_user(value, (unsigned int __user *) compat_ptr(data)); - else - ret = -EIO; - goto out_tsk; - - case PTRACE_POKETEXT: - case PTRACE_POKEDATA: /* write the word at location addr */ - ret = ia32_poke(child, addr, data); - goto out_tsk; - case PTRACE_PEEKUSR: /* read word at addr in USER area */ ret = -EIO; if ((addr & 3) || addr > 17*sizeof(int)) @@ -1632,27 +1564,9 @@ sys32_ptrace (int request, pid_t pid, unsigned int addr, unsigned int data) compat_ptr(data)); break; - case PTRACE_GETEVENTMSG: - ret = put_user(child->ptrace_message, (unsigned int __user *) compat_ptr(data)); - break; - - case PTRACE_SYSCALL: /* continue, stop after next syscall */ - case PTRACE_CONT: /* restart after signal. */ - case PTRACE_KILL: - case PTRACE_SINGLESTEP: /* execute chile for one instruction */ - case PTRACE_DETACH: /* detach a process */ - ret = sys_ptrace(request, pid, addr, data); - break; - default: - ret = ptrace_request(child, request, addr, data); - break; - + return compat_ptrace_request(child, request, caddr, cdata); } - out_tsk: - put_task_struct(child); - out: - unlock_kernel(); return ret; } @@ -1704,14 +1618,6 @@ out: } asmlinkage int -sys32_pause (void) -{ - current->state = TASK_INTERRUPTIBLE; - schedule(); - return -ERESTARTNOHAND; -} - -asmlinkage int sys32_msync (unsigned int start, unsigned int len, int flags) { unsigned int addr; diff --git a/arch/ia64/include/asm/break.h b/arch/ia64/include/asm/break.h index f03402039896..e90c40ec9edf 100644 --- a/arch/ia64/include/asm/break.h +++ b/arch/ia64/include/asm/break.h @@ -20,4 +20,13 @@ */ #define __IA64_BREAK_SYSCALL 0x100000 +/* + * Xen specific break numbers: + */ +#define __IA64_XEN_HYPERCALL 0x1000 +/* [__IA64_XEN_HYPERPRIVOP_START, __IA64_XEN_HYPERPRIVOP_MAX] is used + for xen hyperprivops */ +#define __IA64_XEN_HYPERPRIVOP_START 0x1 +#define __IA64_XEN_HYPERPRIVOP_MAX 0x1a + #endif /* _ASM_IA64_BREAK_H */ diff --git a/arch/ia64/include/asm/cacheflush.h b/arch/ia64/include/asm/cacheflush.h index afcfbda76e20..c8ce2719fee8 100644 --- a/arch/ia64/include/asm/cacheflush.h +++ b/arch/ia64/include/asm/cacheflush.h @@ -34,6 +34,8 @@ do { \ #define flush_dcache_mmap_unlock(mapping) do { } while (0) extern void flush_icache_range (unsigned long start, unsigned long end); +extern void clflush_cache_range(void *addr, int size); + #define flush_icache_user_range(vma, page, user_addr, len) \ do { \ diff --git a/arch/ia64/include/asm/device.h b/arch/ia64/include/asm/device.h index 3db6daf7f251..41ab85d66f33 100644 --- a/arch/ia64/include/asm/device.h +++ b/arch/ia64/include/asm/device.h @@ -10,6 +10,9 @@ struct dev_archdata { #ifdef CONFIG_ACPI void *acpi_handle; #endif +#ifdef CONFIG_DMAR + void *iommu; /* hook for IOMMU specific extension */ +#endif }; #endif /* _ASM_IA64_DEVICE_H */ diff --git a/arch/ia64/include/asm/dma-mapping.h b/arch/ia64/include/asm/dma-mapping.h index 06ff1ba21465..bbab7e2b0fc9 100644 --- a/arch/ia64/include/asm/dma-mapping.h +++ b/arch/ia64/include/asm/dma-mapping.h @@ -7,6 +7,49 @@ */ #include <asm/machvec.h> #include <linux/scatterlist.h> +#include <asm/swiotlb.h> + +struct dma_mapping_ops { + int (*mapping_error)(struct device *dev, + dma_addr_t dma_addr); + void* (*alloc_coherent)(struct device *dev, size_t size, + dma_addr_t *dma_handle, gfp_t gfp); + void (*free_coherent)(struct device *dev, size_t size, + void *vaddr, dma_addr_t dma_handle); + dma_addr_t (*map_single)(struct device *hwdev, unsigned long ptr, + size_t size, int direction); + void (*unmap_single)(struct device *dev, dma_addr_t addr, + size_t size, int direction); + void (*sync_single_for_cpu)(struct device *hwdev, + dma_addr_t dma_handle, size_t size, + int direction); + void (*sync_single_for_device)(struct device *hwdev, + dma_addr_t dma_handle, size_t size, + int direction); + void (*sync_single_range_for_cpu)(struct device *hwdev, + dma_addr_t dma_handle, unsigned long offset, + size_t size, int direction); + void (*sync_single_range_for_device)(struct device *hwdev, + dma_addr_t dma_handle, unsigned long offset, + size_t size, int direction); + void (*sync_sg_for_cpu)(struct device *hwdev, + struct scatterlist *sg, int nelems, + int direction); + void (*sync_sg_for_device)(struct device *hwdev, + struct scatterlist *sg, int nelems, + int direction); + int (*map_sg)(struct device *hwdev, struct scatterlist *sg, + int nents, int direction); + void (*unmap_sg)(struct device *hwdev, + struct scatterlist *sg, int nents, + int direction); + int (*dma_supported_op)(struct device *hwdev, u64 mask); + int is_phys; +}; + +extern struct dma_mapping_ops *dma_ops; +extern struct ia64_machine_vector ia64_mv; +extern void set_iommu_machvec(void); #define dma_alloc_coherent(dev, size, handle, gfp) \ platform_dma_alloc_coherent(dev, size, handle, (gfp) | GFP_DMA) @@ -96,4 +139,11 @@ dma_cache_sync (struct device *dev, void *vaddr, size_t size, #define dma_is_consistent(d, h) (1) /* all we do is coherent memory... */ +static inline struct dma_mapping_ops *get_dma_ops(struct device *dev) +{ + return dma_ops; +} + + + #endif /* _ASM_IA64_DMA_MAPPING_H */ diff --git a/arch/ia64/include/asm/iommu.h b/arch/ia64/include/asm/iommu.h new file mode 100644 index 000000000000..5fb2bb93de3b --- /dev/null +++ b/arch/ia64/include/asm/iommu.h @@ -0,0 +1,16 @@ +#ifndef _ASM_IA64_IOMMU_H +#define _ASM_IA64_IOMMU_H 1 + +#define cpu_has_x2apic 0 +/* 10 seconds */ +#define DMAR_OPERATION_TIMEOUT (((cycles_t) local_cpu_data->itc_freq)*10) + +extern void pci_iommu_shutdown(void); +extern void no_iommu_init(void); +extern int force_iommu, no_iommu; +extern int iommu_detected; +extern void iommu_dma_init(void); +extern void machvec_init(const char *name); +extern int forbid_dac; + +#endif diff --git a/arch/ia64/include/asm/kregs.h b/arch/ia64/include/asm/kregs.h index aefcdfee7f23..39e65f6639f5 100644 --- a/arch/ia64/include/asm/kregs.h +++ b/arch/ia64/include/asm/kregs.h @@ -32,7 +32,7 @@ #define IA64_TR_CURRENT_STACK 1 /* dtr1: maps kernel's memory- & register-stacks */ #define IA64_TR_ALLOC_BASE 2 /* itr&dtr: Base of dynamic TR resource*/ -#define IA64_TR_ALLOC_MAX 32 /* Max number for dynamic use*/ +#define IA64_TR_ALLOC_MAX 64 /* Max number for dynamic use*/ /* Processor status register bits: */ #define IA64_PSR_BE_BIT 1 diff --git a/arch/ia64/include/asm/machvec.h b/arch/ia64/include/asm/machvec.h index 2b850ccafef5..1ea28bcee33b 100644 --- a/arch/ia64/include/asm/machvec.h +++ b/arch/ia64/include/asm/machvec.h @@ -120,6 +120,8 @@ extern void machvec_tlb_migrate_finish (struct mm_struct *); # include <asm/machvec_hpsim.h> # elif defined (CONFIG_IA64_DIG) # include <asm/machvec_dig.h> +# elif defined(CONFIG_IA64_DIG_VTD) +# include <asm/machvec_dig_vtd.h> # elif defined (CONFIG_IA64_HP_ZX1) # include <asm/machvec_hpzx1.h> # elif defined (CONFIG_IA64_HP_ZX1_SWIOTLB) @@ -128,6 +130,8 @@ extern void machvec_tlb_migrate_finish (struct mm_struct *); # include <asm/machvec_sn2.h> # elif defined (CONFIG_IA64_SGI_UV) # include <asm/machvec_uv.h> +# elif defined (CONFIG_IA64_XEN_GUEST) +# include <asm/machvec_xen.h> # elif defined (CONFIG_IA64_GENERIC) # ifdef MACHVEC_PLATFORM_HEADER diff --git a/arch/ia64/include/asm/machvec_dig_vtd.h b/arch/ia64/include/asm/machvec_dig_vtd.h new file mode 100644 index 000000000000..3400b561e711 --- /dev/null +++ b/arch/ia64/include/asm/machvec_dig_vtd.h @@ -0,0 +1,38 @@ +#ifndef _ASM_IA64_MACHVEC_DIG_VTD_h +#define _ASM_IA64_MACHVEC_DIG_VTD_h + +extern ia64_mv_setup_t dig_setup; +extern ia64_mv_dma_alloc_coherent vtd_alloc_coherent; +extern ia64_mv_dma_free_coherent vtd_free_coherent; +extern ia64_mv_dma_map_single_attrs vtd_map_single_attrs; +extern ia64_mv_dma_unmap_single_attrs vtd_unmap_single_attrs; +extern ia64_mv_dma_map_sg_attrs vtd_map_sg_attrs; +extern ia64_mv_dma_unmap_sg_attrs vtd_unmap_sg_attrs; +extern ia64_mv_dma_supported iommu_dma_supported; +extern ia64_mv_dma_mapping_error vtd_dma_mapping_error; +extern ia64_mv_dma_init pci_iommu_alloc; + +/* + * This stuff has dual use! + * + * For a generic kernel, the macros are used to initialize the + * platform's machvec structure. When compiling a non-generic kernel, + * the macros are used directly. + */ +#define platform_name "dig_vtd" +#define platform_setup dig_setup +#define platform_dma_init pci_iommu_alloc +#define platform_dma_alloc_coherent vtd_alloc_coherent +#define platform_dma_free_coherent vtd_free_coherent +#define platform_dma_map_single_attrs vtd_map_single_attrs +#define platform_dma_unmap_single_attrs vtd_unmap_single_attrs +#define platform_dma_map_sg_attrs vtd_map_sg_attrs +#define platform_dma_unmap_sg_attrs vtd_unmap_sg_attrs +#define platform_dma_sync_single_for_cpu machvec_dma_sync_single +#define platform_dma_sync_sg_for_cpu machvec_dma_sync_sg +#define platform_dma_sync_single_for_device machvec_dma_sync_single +#define platform_dma_sync_sg_for_device machvec_dma_sync_sg +#define platform_dma_supported iommu_dma_supported +#define platform_dma_mapping_error vtd_dma_mapping_error + +#endif /* _ASM_IA64_MACHVEC_DIG_VTD_h */ diff --git a/arch/ia64/include/asm/machvec_init.h b/arch/ia64/include/asm/machvec_init.h index 7f21249fba3f..ef964b286842 100644 --- a/arch/ia64/include/asm/machvec_init.h +++ b/arch/ia64/include/asm/machvec_init.h @@ -1,3 +1,4 @@ +#include <asm/iommu.h> #include <asm/machvec.h> extern ia64_mv_send_ipi_t ia64_send_ipi; diff --git a/arch/ia64/include/asm/machvec_xen.h b/arch/ia64/include/asm/machvec_xen.h new file mode 100644 index 000000000000..55f9228056cd --- /dev/null +++ b/arch/ia64/include/asm/machvec_xen.h @@ -0,0 +1,22 @@ +#ifndef _ASM_IA64_MACHVEC_XEN_h +#define _ASM_IA64_MACHVEC_XEN_h + +extern ia64_mv_setup_t dig_setup; +extern ia64_mv_cpu_init_t xen_cpu_init; +extern ia64_mv_irq_init_t xen_irq_init; +extern ia64_mv_send_ipi_t xen_platform_send_ipi; + +/* + * This stuff has dual use! + * + * For a generic kernel, the macros are used to initialize the + * platform's machvec structure. When compiling a non-generic kernel, + * the macros are used directly. + */ +#define platform_name "xen" +#define platform_setup dig_setup +#define platform_cpu_init xen_cpu_init +#define platform_irq_init xen_irq_init +#define platform_send_ipi xen_platform_send_ipi + +#endif /* _ASM_IA64_MACHVEC_XEN_h */ diff --git a/arch/ia64/include/asm/meminit.h b/arch/ia64/include/asm/meminit.h index 7245a5781594..6bc96ee54327 100644 --- a/arch/ia64/include/asm/meminit.h +++ b/arch/ia64/include/asm/meminit.h @@ -18,10 +18,11 @@ * - crash dumping code reserved region * - Kernel memory map built from EFI memory map * - ELF core header + * - xen start info if CONFIG_XEN * * More could be added if necessary */ -#define IA64_MAX_RSVD_REGIONS 8 +#define IA64_MAX_RSVD_REGIONS 9 struct rsvd_region { unsigned long start; /* virtual address of beginning of element */ diff --git a/arch/ia64/include/asm/native/inst.h b/arch/ia64/include/asm/native/inst.h index c8efbf7b849e..0a1026cca4fa 100644 --- a/arch/ia64/include/asm/native/inst.h +++ b/arch/ia64/include/asm/native/inst.h @@ -36,8 +36,13 @@ ;; \ movl clob = PARAVIRT_POISON; \ ;; +# define CLOBBER_PRED(pred_clob) \ + ;; \ + cmp.eq pred_clob, p0 = r0, r0 \ + ;; #else -# define CLOBBER(clob) /* nothing */ +# define CLOBBER(clob) /* nothing */ +# define CLOBBER_PRED(pred_clob) /* nothing */ #endif #define MOV_FROM_IFA(reg) \ @@ -136,7 +141,8 @@ #define SSM_PSR_I(pred, pred_clob, clob) \ (pred) ssm psr.i \ - CLOBBER(clob) + CLOBBER(clob) \ + CLOBBER_PRED(pred_clob) #define RSM_PSR_I(pred, clob0, clob1) \ (pred) rsm psr.i \ diff --git a/arch/ia64/include/asm/native/pvchk_inst.h b/arch/ia64/include/asm/native/pvchk_inst.h new file mode 100644 index 000000000000..b8e6eb1090d7 --- /dev/null +++ b/arch/ia64/include/asm/native/pvchk_inst.h @@ -0,0 +1,263 @@ +#ifndef _ASM_NATIVE_PVCHK_INST_H +#define _ASM_NATIVE_PVCHK_INST_H + +/****************************************************************************** + * arch/ia64/include/asm/native/pvchk_inst.h + * Checker for paravirtualizations of privileged operations. + * + * Copyright (C) 2005 Hewlett-Packard Co + * Dan Magenheimer <dan.magenheimer@hp.com> + * + * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp> + * VA Linux Systems Japan K.K. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +/********************************************** + * Instructions paravirtualized for correctness + **********************************************/ + +/* "fc" and "thash" are privilege-sensitive instructions, meaning they + * may have different semantics depending on whether they are executed + * at PL0 vs PL!=0. When paravirtualized, these instructions mustn't + * be allowed to execute directly, lest incorrect semantics result. + */ + +#define fc .error "fc should not be used directly." +#define thash .error "thash should not be used directly." + +/* Note that "ttag" and "cover" are also privilege-sensitive; "ttag" + * is not currently used (though it may be in a long-format VHPT system!) + * and the semantics of cover only change if psr.ic is off which is very + * rare (and currently non-existent outside of assembly code + */ +#define ttag .error "ttag should not be used directly." +#define cover .error "cover should not be used directly." + +/* There are also privilege-sensitive registers. These registers are + * readable at any privilege level but only writable at PL0. + */ +#define cpuid .error "cpuid should not be used directly." +#define pmd .error "pmd should not be used directly." + +/* + * mov ar.eflag = + * mov = ar.eflag + */ + +/********************************************** + * Instructions paravirtualized for performance + **********************************************/ +/* + * Those instructions include '.' which can't be handled by cpp. + * or can't be handled by cpp easily. + * They are handled by sed instead of cpp. + */ + +/* for .S + * itc.i + * itc.d + * + * bsw.0 + * bsw.1 + * + * ssm psr.ic | PSR_DEFAULT_BITS + * ssm psr.ic + * rsm psr.ic + * ssm psr.i + * rsm psr.i + * rsm psr.i | psr.ic + * rsm psr.dt + * ssm psr.dt + * + * mov = cr.ifa + * mov = cr.itir + * mov = cr.isr + * mov = cr.iha + * mov = cr.ipsr + * mov = cr.iim + * mov = cr.iip + * mov = cr.ivr + * mov = psr + * + * mov cr.ifa = + * mov cr.itir = + * mov cr.iha = + * mov cr.ipsr = + * mov cr.ifs = + * mov cr.iip = + * mov cr.kr = + */ + +/* for intrinsics + * ssm psr.i + * rsm psr.i + * mov = psr + * mov = ivr + * mov = tpr + * mov cr.itm = + * mov eoi = + * mov rr[] = + * mov = rr[] + * mov = kr + * mov kr = + * ptc.ga + */ + +/************************************************************* + * define paravirtualized instrcution macros as nop to ingore. + * and check whether arguments are appropriate. + *************************************************************/ + +/* check whether reg is a regular register */ +.macro is_rreg_in reg + .ifc "\reg", "r0" + nop 0 + .exitm + .endif + ;; + mov \reg = r0 + ;; +.endm +#define IS_RREG_IN(reg) is_rreg_in reg ; + +#define IS_RREG_OUT(reg) \ + ;; \ + mov reg = r0 \ + ;; + +#define IS_RREG_CLOB(reg) IS_RREG_OUT(reg) + +/* check whether pred is a predicate register */ +#define IS_PRED_IN(pred) \ + ;; \ + (pred) nop 0 \ + ;; + +#define IS_PRED_OUT(pred) \ + ;; \ + cmp.eq pred, p0 = r0, r0 \ + ;; + +#define IS_PRED_CLOB(pred) IS_PRED_OUT(pred) + + +#define DO_SAVE_MIN(__COVER, SAVE_IFS, EXTRA, WORKAROUND) \ + nop 0 +#define MOV_FROM_IFA(reg) \ + IS_RREG_OUT(reg) +#define MOV_FROM_ITIR(reg) \ + IS_RREG_OUT(reg) +#define MOV_FROM_ISR(reg) \ + IS_RREG_OUT(reg) +#define MOV_FROM_IHA(reg) \ + IS_RREG_OUT(reg) +#define MOV_FROM_IPSR(pred, reg) \ + IS_PRED_IN(pred) \ + IS_RREG_OUT(reg) +#define MOV_FROM_IIM(reg) \ + IS_RREG_OUT(reg) +#define MOV_FROM_IIP(reg) \ + IS_RREG_OUT(reg) +#define MOV_FROM_IVR(reg, clob) \ + IS_RREG_OUT(reg) \ + IS_RREG_CLOB(clob) +#define MOV_FROM_PSR(pred, reg, clob) \ + IS_PRED_IN(pred) \ + IS_RREG_OUT(reg) \ + IS_RREG_CLOB(clob) +#define MOV_TO_IFA(reg, clob) \ + IS_RREG_IN(reg) \ + IS_RREG_CLOB(clob) +#define MOV_TO_ITIR(pred, reg, clob) \ + IS_PRED_IN(pred) \ + IS_RREG_IN(reg) \ + IS_RREG_CLOB(clob) +#define MOV_TO_IHA(pred, reg, clob) \ + IS_PRED_IN(pred) \ + IS_RREG_IN(reg) \ + IS_RREG_CLOB(clob) +#define MOV_TO_IPSR(pred, reg, clob) \ + IS_PRED_IN(pred) \ + IS_RREG_IN(reg) \ + IS_RREG_CLOB(clob) +#define MOV_TO_IFS(pred, reg, clob) \ + IS_PRED_IN(pred) \ + IS_RREG_IN(reg) \ + IS_RREG_CLOB(clob) +#define MOV_TO_IIP(reg, clob) \ + IS_RREG_IN(reg) \ + IS_RREG_CLOB(clob) +#define MOV_TO_KR(kr, reg, clob0, clob1) \ + IS_RREG_IN(reg) \ + IS_RREG_CLOB(clob0) \ + IS_RREG_CLOB(clob1) +#define ITC_I(pred, reg, clob) \ + IS_PRED_IN(pred) \ + IS_RREG_IN(reg) \ + IS_RREG_CLOB(clob) +#define ITC_D(pred, reg, clob) \ + IS_PRED_IN(pred) \ + IS_RREG_IN(reg) \ + IS_RREG_CLOB(clob) +#define ITC_I_AND_D(pred_i, pred_d, reg, clob) \ + IS_PRED_IN(pred_i) \ + IS_PRED_IN(pred_d) \ + IS_RREG_IN(reg) \ + IS_RREG_CLOB(clob) +#define THASH(pred, reg0, reg1, clob) \ + IS_PRED_IN(pred) \ + IS_RREG_OUT(reg0) \ + IS_RREG_IN(reg1) \ + IS_RREG_CLOB(clob) +#define SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(clob0, clob1) \ + IS_RREG_CLOB(clob0) \ + IS_RREG_CLOB(clob1) +#define SSM_PSR_IC_AND_SRLZ_D(clob0, clob1) \ + IS_RREG_CLOB(clob0) \ + IS_RREG_CLOB(clob1) +#define RSM_PSR_IC(clob) \ + IS_RREG_CLOB(clob) +#define SSM_PSR_I(pred, pred_clob, clob) \ + IS_PRED_IN(pred) \ + IS_PRED_CLOB(pred_clob) \ + IS_RREG_CLOB(clob) +#define RSM_PSR_I(pred, clob0, clob1) \ + IS_PRED_IN(pred) \ + IS_RREG_CLOB(clob0) \ + IS_RREG_CLOB(clob1) +#define RSM_PSR_I_IC(clob0, clob1, clob2) \ + IS_RREG_CLOB(clob0) \ + IS_RREG_CLOB(clob1) \ + IS_RREG_CLOB(clob2) +#define RSM_PSR_DT \ + nop 0 +#define SSM_PSR_DT_AND_SRLZ_I \ + nop 0 +#define BSW_0(clob0, clob1, clob2) \ + IS_RREG_CLOB(clob0) \ + IS_RREG_CLOB(clob1) \ + IS_RREG_CLOB(clob2) +#define BSW_1(clob0, clob1) \ + IS_RREG_CLOB(clob0) \ + IS_RREG_CLOB(clob1) +#define COVER \ + nop 0 +#define RFI \ + br.ret.sptk.many rp /* defining nop causes dependency error */ + +#endif /* _ASM_NATIVE_PVCHK_INST_H */ diff --git a/arch/ia64/include/asm/paravirt.h b/arch/ia64/include/asm/paravirt.h index 660cab044834..2bf3636473fe 100644 --- a/arch/ia64/include/asm/paravirt.h +++ b/arch/ia64/include/asm/paravirt.h @@ -117,7 +117,7 @@ static inline void paravirt_post_smp_prepare_boot_cpu(void) struct pv_iosapic_ops { void (*pcat_compat_init)(void); - struct irq_chip *(*get_irq_chip)(unsigned long trigger); + struct irq_chip *(*__get_irq_chip)(unsigned long trigger); unsigned int (*__read)(char __iomem *iosapic, unsigned int reg); void (*__write)(char __iomem *iosapic, unsigned int reg, u32 val); @@ -135,7 +135,7 @@ iosapic_pcat_compat_init(void) static inline struct irq_chip* iosapic_get_irq_chip(unsigned long trigger) { - return pv_iosapic_ops.get_irq_chip(trigger); + return pv_iosapic_ops.__get_irq_chip(trigger); } static inline unsigned int diff --git a/arch/ia64/include/asm/pci.h b/arch/ia64/include/asm/pci.h index ce342fb74246..1d660d89db0d 100644 --- a/arch/ia64/include/asm/pci.h +++ b/arch/ia64/include/asm/pci.h @@ -156,4 +156,7 @@ static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel) return channel ? isa_irq_to_vector(15) : isa_irq_to_vector(14); } +#ifdef CONFIG_DMAR +extern void pci_iommu_alloc(void); +#endif #endif /* _ASM_IA64_PCI_H */ diff --git a/arch/ia64/include/asm/ptrace.h b/arch/ia64/include/asm/ptrace.h index 15f8dcfe6eee..6417c1ecb44e 100644 --- a/arch/ia64/include/asm/ptrace.h +++ b/arch/ia64/include/asm/ptrace.h @@ -240,6 +240,12 @@ struct switch_stack { */ # define instruction_pointer(regs) ((regs)->cr_iip + ia64_psr(regs)->ri) +static inline unsigned long user_stack_pointer(struct pt_regs *regs) +{ + /* FIXME: should this be bspstore + nr_dirty regs? */ + return regs->ar_bspstore; +} + #define regs_return_value(regs) ((regs)->r8) /* Conserve space in histogram by encoding slot bits in address @@ -319,6 +325,8 @@ struct switch_stack { #define arch_has_block_step() (1) extern void user_enable_block_step(struct task_struct *); +#define __ARCH_WANT_COMPAT_SYS_PTRACE + #endif /* !__KERNEL__ */ /* pt_all_user_regs is used for PTRACE_GETREGS PTRACE_SETREGS */ diff --git a/arch/ia64/include/asm/pvclock-abi.h b/arch/ia64/include/asm/pvclock-abi.h new file mode 100644 index 000000000000..44ef9ef8f5b3 --- /dev/null +++ b/arch/ia64/include/asm/pvclock-abi.h @@ -0,0 +1,48 @@ +/* + * same structure to x86's + * Hopefully asm-x86/pvclock-abi.h would be moved to somewhere more generic. + * For now, define same duplicated definitions. + */ + +#ifndef _ASM_IA64__PVCLOCK_ABI_H +#define _ASM_IA64__PVCLOCK_ABI_H +#ifndef __ASSEMBLY__ + +/* + * These structs MUST NOT be changed. + * They are the ABI between hypervisor and guest OS. + * Both Xen and KVM are using this. + * + * pvclock_vcpu_time_info holds the system time and the tsc timestamp + * of the last update. So the guest can use the tsc delta to get a + * more precise system time. There is one per virtual cpu. + * + * pvclock_wall_clock references the point in time when the system + * time was zero (usually boot time), thus the guest calculates the + * current wall clock by adding the system time. + * + * Protocol for the "version" fields is: hypervisor raises it (making + * it uneven) before it starts updating the fields and raises it again + * (making it even) when it is done. Thus the guest can make sure the + * time values it got are consistent by checking the version before + * and after reading them. + */ + +struct pvclock_vcpu_time_info { + u32 version; + u32 pad0; + u64 tsc_timestamp; + u64 system_time; + u32 tsc_to_system_mul; + s8 tsc_shift; + u8 pad[3]; +} __attribute__((__packed__)); /* 32 bytes */ + +struct pvclock_wall_clock { + u32 version; + u32 sec; + u32 nsec; +} __attribute__((__packed__)); + +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_IA64__PVCLOCK_ABI_H */ diff --git a/arch/ia64/include/asm/swiotlb.h b/arch/ia64/include/asm/swiotlb.h new file mode 100644 index 000000000000..fb79423834d0 --- /dev/null +++ b/arch/ia64/include/asm/swiotlb.h @@ -0,0 +1,56 @@ +#ifndef ASM_IA64__SWIOTLB_H +#define ASM_IA64__SWIOTLB_H + +#include <linux/dma-mapping.h> + +/* SWIOTLB interface */ + +extern dma_addr_t swiotlb_map_single(struct device *hwdev, void *ptr, + size_t size, int dir); +extern void *swiotlb_alloc_coherent(struct device *hwdev, size_t size, + dma_addr_t *dma_handle, gfp_t flags); +extern void swiotlb_unmap_single(struct device *hwdev, dma_addr_t dev_addr, + size_t size, int dir); +extern void swiotlb_sync_single_for_cpu(struct device *hwdev, + dma_addr_t dev_addr, + size_t size, int dir); +extern void swiotlb_sync_single_for_device(struct device *hwdev, + dma_addr_t dev_addr, + size_t size, int dir); +extern void swiotlb_sync_single_range_for_cpu(struct device *hwdev, + dma_addr_t dev_addr, + unsigned long offset, + size_t size, int dir); +extern void swiotlb_sync_single_range_for_device(struct device *hwdev, + dma_addr_t dev_addr, + unsigned long offset, + size_t size, int dir); +extern void swiotlb_sync_sg_for_cpu(struct device *hwdev, + struct scatterlist *sg, int nelems, + int dir); +extern void swiotlb_sync_sg_for_device(struct device *hwdev, + struct scatterlist *sg, int nelems, + int dir); +extern int swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg, + int nents, int direction); +extern void swiotlb_unmap_sg(struct device *hwdev, struct scatterlist *sg, + int nents, int direction); +extern int swiotlb_dma_mapping_error(struct device *hwdev, dma_addr_t dma_addr); +extern void swiotlb_free_coherent(struct device *hwdev, size_t size, + void *vaddr, dma_addr_t dma_handle); +extern int swiotlb_dma_supported(struct device *hwdev, u64 mask); +extern void swiotlb_init(void); + +extern int swiotlb_force; + +#ifdef CONFIG_SWIOTLB +extern int swiotlb; +extern void pci_swiotlb_init(void); +#else +#define swiotlb 0 +static inline void pci_swiotlb_init(void) +{ +} +#endif + +#endif /* ASM_IA64__SWIOTLB_H */ diff --git a/arch/ia64/include/asm/sync_bitops.h b/arch/ia64/include/asm/sync_bitops.h new file mode 100644 index 000000000000..593c12eeb270 --- /dev/null +++ b/arch/ia64/include/asm/sync_bitops.h @@ -0,0 +1,51 @@ +#ifndef _ASM_IA64_SYNC_BITOPS_H +#define _ASM_IA64_SYNC_BITOPS_H + +/* + * Copyright (C) 2008 Isaku Yamahata <yamahata at valinux co jp> + * + * Based on synch_bitops.h which Dan Magenhaimer wrote. + * + * bit operations which provide guaranteed strong synchronisation + * when communicating with Xen or other guest OSes running on other CPUs. + */ + +static inline void sync_set_bit(int nr, volatile void *addr) +{ + set_bit(nr, addr); +} + +static inline void sync_clear_bit(int nr, volatile void *addr) +{ + clear_bit(nr, addr); +} + +static inline void sync_change_bit(int nr, volatile void *addr) +{ + change_bit(nr, addr); +} + +static inline int sync_test_and_set_bit(int nr, volatile void *addr) +{ + return test_and_set_bit(nr, addr); +} + +static inline int sync_test_and_clear_bit(int nr, volatile void *addr) +{ + return test_and_clear_bit(nr, addr); +} + +static inline int sync_test_and_change_bit(int nr, volatile void *addr) +{ + return test_and_change_bit(nr, addr); +} + +static inline int sync_test_bit(int nr, const volatile void *addr) +{ + return test_bit(nr, addr); +} + +#define sync_cmpxchg(ptr, old, new) \ + ((__typeof__(*(ptr)))cmpxchg_acq((ptr), (old), (new))) + +#endif /* _ASM_IA64_SYNC_BITOPS_H */ diff --git a/arch/ia64/include/asm/syscall.h b/arch/ia64/include/asm/syscall.h new file mode 100644 index 000000000000..2f758a42f94b --- /dev/null +++ b/arch/ia64/include/asm/syscall.h @@ -0,0 +1,163 @@ +/* + * Access to user system call parameters and results + * + * Copyright (C) 2008 Intel Corp. Shaohua Li <shaohua.li@intel.com> + * + * This copyrighted material is made available to anyone wishing to use, + * modify, copy, or redistribute it subject to the terms and conditions + * of the GNU General Public License v.2. + * + * See asm-generic/syscall.h for descriptions of what we must do here. + */ + +#ifndef _ASM_SYSCALL_H +#define _ASM_SYSCALL_H 1 + +#include <linux/sched.h> +#include <linux/err.h> + +static inline long syscall_get_nr(struct task_struct *task, + struct pt_regs *regs) +{ + if ((long)regs->cr_ifs < 0) /* Not a syscall */ + return -1; + +#ifdef CONFIG_IA32_SUPPORT + if (IS_IA32_PROCESS(regs)) + return regs->r1; +#endif + + return regs->r15; +} + +static inline void syscall_rollback(struct task_struct *task, + struct pt_regs *regs) +{ +#ifdef CONFIG_IA32_SUPPORT + if (IS_IA32_PROCESS(regs)) + regs->r8 = regs->r1; +#endif + + /* do nothing */ +} + +static inline long syscall_get_error(struct task_struct *task, + struct pt_regs *regs) +{ +#ifdef CONFIG_IA32_SUPPORT + if (IS_IA32_PROCESS(regs)) + return regs->r8; +#endif + + return regs->r10 == -1 ? regs->r8:0; +} + +static inline long syscall_get_return_value(struct task_struct *task, + struct pt_regs *regs) +{ + return regs->r8; +} + +static inline void syscall_set_return_value(struct task_struct *task, + struct pt_regs *regs, + int error, long val) +{ +#ifdef CONFIG_IA32_SUPPORT + if (IS_IA32_PROCESS(regs)) { + regs->r8 = (long) error ? error : val; + return; + } +#endif + + if (error) { + /* error < 0, but ia64 uses > 0 return value */ + regs->r8 = -error; + regs->r10 = -1; + } else { + regs->r8 = val; + regs->r10 = 0; + } +} + +extern void ia64_syscall_get_set_arguments(struct task_struct *task, + struct pt_regs *regs, unsigned int i, unsigned int n, + unsigned long *args, int rw); +static inline void syscall_get_arguments(struct task_struct *task, + struct pt_regs *regs, + unsigned int i, unsigned int n, + unsigned long *args) +{ + BUG_ON(i + n > 6); + +#ifdef CONFIG_IA32_SUPPORT + if (IS_IA32_PROCESS(regs)) { + switch (i + n) { + case 6: + if (!n--) break; + *args++ = regs->r13; + case 5: + if (!n--) break; + *args++ = regs->r15; + case 4: + if (!n--) break; + *args++ = regs->r14; + case 3: + if (!n--) break; + *args++ = regs->r10; + case 2: + if (!n--) break; + *args++ = regs->r9; + case 1: + if (!n--) break; + *args++ = regs->r11; + case 0: + if (!n--) break; + default: + BUG(); + break; + } + + return; + } +#endif + ia64_syscall_get_set_arguments(task, regs, i, n, args, 0); +} + +static inline void syscall_set_arguments(struct task_struct *task, + struct pt_regs *regs, + unsigned int i, unsigned int n, + unsigned long *args) +{ + BUG_ON(i + n > 6); + +#ifdef CONFIG_IA32_SUPPORT + if (IS_IA32_PROCESS(regs)) { + switch (i + n) { + case 6: + if (!n--) break; + regs->r13 = *args++; + case 5: + if (!n--) break; + regs->r15 = *args++; + case 4: + if (!n--) break; + regs->r14 = *args++; + case 3: + if (!n--) break; + regs->r10 = *args++; + case 2: + if (!n--) break; + regs->r9 = *args++; + case 1: + if (!n--) break; + regs->r11 = *args++; + case 0: + if (!n--) break; + } + + return; + } +#endif + ia64_syscall_get_set_arguments(task, regs, i, n, args, 1); +} +#endif /* _ASM_SYSCALL_H */ diff --git a/arch/ia64/include/asm/thread_info.h b/arch/ia64/include/asm/thread_info.h index 7c60fcdd2efd..ae6922626bf4 100644 --- a/arch/ia64/include/asm/thread_info.h +++ b/arch/ia64/include/asm/thread_info.h @@ -87,9 +87,6 @@ struct thread_info { #define alloc_task_struct() ((struct task_struct *)__get_free_pages(GFP_KERNEL | __GFP_COMP, KERNEL_STACK_SIZE_ORDER)) #define free_task_struct(tsk) free_pages((unsigned long) (tsk), KERNEL_STACK_SIZE_ORDER) -#define tsk_set_notify_resume(tsk) \ - set_ti_thread_flag(task_thread_info(tsk), TIF_NOTIFY_RESUME) -extern void tsk_clear_notify_resume(struct task_struct *tsk); #endif /* !__ASSEMBLY */ /* diff --git a/arch/ia64/include/asm/timex.h b/arch/ia64/include/asm/timex.h index 05a6baf8a472..4e03cfe74a0c 100644 --- a/arch/ia64/include/asm/timex.h +++ b/arch/ia64/include/asm/timex.h @@ -39,4 +39,6 @@ get_cycles (void) return ret; } +extern void ia64_cpu_local_tick (void); + #endif /* _ASM_IA64_TIMEX_H */ diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h index d535833aab5e..f791576355ad 100644 --- a/arch/ia64/include/asm/unistd.h +++ b/arch/ia64/include/asm/unistd.h @@ -337,6 +337,7 @@ # define __ARCH_WANT_SYS_NICE # define __ARCH_WANT_SYS_OLD_GETRLIMIT # define __ARCH_WANT_SYS_OLDUMOUNT +# define __ARCH_WANT_SYS_PAUSE # define __ARCH_WANT_SYS_SIGPENDING # define __ARCH_WANT_SYS_SIGPROCMASK # define __ARCH_WANT_COMPAT_SYS_RT_SIGSUSPEND diff --git a/arch/ia64/include/asm/xen/events.h b/arch/ia64/include/asm/xen/events.h new file mode 100644 index 000000000000..73248781fba8 --- /dev/null +++ b/arch/ia64/include/asm/xen/events.h @@ -0,0 +1,50 @@ +/****************************************************************************** + * arch/ia64/include/asm/xen/events.h + * + * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp> + * VA Linux Systems Japan K.K. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ +#ifndef _ASM_IA64_XEN_EVENTS_H +#define _ASM_IA64_XEN_EVENTS_H + +enum ipi_vector { + XEN_RESCHEDULE_VECTOR, + XEN_IPI_VECTOR, + XEN_CMCP_VECTOR, + XEN_CPEP_VECTOR, + + XEN_NR_IPIS, +}; + +static inline int xen_irqs_disabled(struct pt_regs *regs) +{ + return !(ia64_psr(regs)->i); +} + +static inline void xen_do_IRQ(int irq, struct pt_regs *regs) +{ + struct pt_regs *old_regs; + old_regs = set_irq_regs(regs); + irq_enter(); + __do_IRQ(irq); + irq_exit(); + set_irq_regs(old_regs); +} +#define irq_ctx_init(cpu) do { } while (0) + +#endif /* _ASM_IA64_XEN_EVENTS_H */ diff --git a/arch/ia64/include/asm/xen/grant_table.h b/arch/ia64/include/asm/xen/grant_table.h new file mode 100644 index 000000000000..2b1fae0e2d11 --- /dev/null +++ b/arch/ia64/include/asm/xen/grant_table.h @@ -0,0 +1,29 @@ +/****************************************************************************** + * arch/ia64/include/asm/xen/grant_table.h + * + * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp> + * VA Linux Systems Japan K.K. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef _ASM_IA64_XEN_GRANT_TABLE_H +#define _ASM_IA64_XEN_GRANT_TABLE_H + +struct vm_struct *xen_alloc_vm_area(unsigned long size); +void xen_free_vm_area(struct vm_struct *area); + +#endif /* _ASM_IA64_XEN_GRANT_TABLE_H */ diff --git a/arch/ia64/include/asm/xen/hypercall.h b/arch/ia64/include/asm/xen/hypercall.h new file mode 100644 index 000000000000..96fc62366aa4 --- /dev/null +++ b/arch/ia64/include/asm/xen/hypercall.h @@ -0,0 +1,265 @@ +/****************************************************************************** + * hypercall.h + * + * Linux-specific hypervisor handling. + * + * Copyright (c) 2002-2004, K A Fraser + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation; or, when distributed + * separately from the Linux kernel or incorporated into other + * software packages, subject to the following license: + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this source file (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, modify, + * merge, publish, distribute, sublicense, and/or sell copies of the Software, + * and to permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + */ + +#ifndef _ASM_IA64_XEN_HYPERCALL_H +#define _ASM_IA64_XEN_HYPERCALL_H + +#include <xen/interface/xen.h> +#include <xen/interface/physdev.h> +#include <xen/interface/sched.h> +#include <asm/xen/xcom_hcall.h> +struct xencomm_handle; +extern unsigned long __hypercall(unsigned long a1, unsigned long a2, + unsigned long a3, unsigned long a4, + unsigned long a5, unsigned long cmd); + +/* + * Assembler stubs for hyper-calls. + */ + +#define _hypercall0(type, name) \ +({ \ + long __res; \ + __res = __hypercall(0, 0, 0, 0, 0, __HYPERVISOR_##name);\ + (type)__res; \ +}) + +#define _hypercall1(type, name, a1) \ +({ \ + long __res; \ + __res = __hypercall((unsigned long)a1, \ + 0, 0, 0, 0, __HYPERVISOR_##name); \ + (type)__res; \ +}) + +#define _hypercall2(type, name, a1, a2) \ +({ \ + long __res; \ + __res = __hypercall((unsigned long)a1, \ + (unsigned long)a2, \ + 0, 0, 0, __HYPERVISOR_##name); \ + (type)__res; \ +}) + +#define _hypercall3(type, name, a1, a2, a3) \ +({ \ + long __res; \ + __res = __hypercall((unsigned long)a1, \ + (unsigned long)a2, \ + (unsigned long)a3, \ + 0, 0, __HYPERVISOR_##name); \ + (type)__res; \ +}) + +#define _hypercall4(type, name, a1, a2, a3, a4) \ +({ \ + long __res; \ + __res = __hypercall((unsigned long)a1, \ + (unsigned long)a2, \ + (unsigned long)a3, \ + (unsigned long)a4, \ + 0, __HYPERVISOR_##name); \ + (type)__res; \ +}) + +#define _hypercall5(type, name, a1, a2, a3, a4, a5) \ +({ \ + long __res; \ + __res = __hypercall((unsigned long)a1, \ + (unsigned long)a2, \ + (unsigned long)a3, \ + (unsigned long)a4, \ + (unsigned long)a5, \ + __HYPERVISOR_##name); \ + (type)__res; \ +}) + + +static inline int +xencomm_arch_hypercall_sched_op(int cmd, struct xencomm_handle *arg) +{ + return _hypercall2(int, sched_op_new, cmd, arg); +} + +static inline long +HYPERVISOR_set_timer_op(u64 timeout) +{ + unsigned long timeout_hi = (unsigned long)(timeout >> 32); + unsigned long timeout_lo = (unsigned long)timeout; + return _hypercall2(long, set_timer_op, timeout_lo, timeout_hi); +} + +static inline int +xencomm_arch_hypercall_multicall(struct xencomm_handle *call_list, + int nr_calls) +{ + return _hypercall2(int, multicall, call_list, nr_calls); +} + +static inline int +xencomm_arch_hypercall_memory_op(unsigned int cmd, struct xencomm_handle *arg) +{ + return _hypercall2(int, memory_op, cmd, arg); +} + +static inline int +xencomm_arch_hypercall_event_channel_op(int cmd, struct xencomm_handle *arg) +{ + return _hypercall2(int, event_channel_op, cmd, arg); +} + +static inline int +xencomm_arch_hypercall_xen_version(int cmd, struct xencomm_handle *arg) +{ + return _hypercall2(int, xen_version, cmd, arg); +} + +static inline int +xencomm_arch_hypercall_console_io(int cmd, int count, + struct xencomm_handle *str) +{ + return _hypercall3(int, console_io, cmd, count, str); +} + +static inline int +xencomm_arch_hypercall_physdev_op(int cmd, struct xencomm_handle *arg) +{ + return _hypercall2(int, physdev_op, cmd, arg); +} + +static inline int +xencomm_arch_hypercall_grant_table_op(unsigned int cmd, + struct xencomm_handle *uop, + unsigned int count) +{ + return _hypercall3(int, grant_table_op, cmd, uop, count); +} + +int HYPERVISOR_grant_table_op(unsigned int cmd, void *uop, unsigned int count); + +extern int xencomm_arch_hypercall_suspend(struct xencomm_handle *arg); + +static inline int +xencomm_arch_hypercall_callback_op(int cmd, struct xencomm_handle *arg) +{ + return _hypercall2(int, callback_op, cmd, arg); +} + +static inline long +xencomm_arch_hypercall_vcpu_op(int cmd, int cpu, void *arg) +{ + return _hypercall3(long, vcpu_op, cmd, cpu, arg); +} + +static inline int +HYPERVISOR_physdev_op(int cmd, void *arg) +{ + switch (cmd) { + case PHYSDEVOP_eoi: + return _hypercall1(int, ia64_fast_eoi, + ((struct physdev_eoi *)arg)->irq); + default: + return xencomm_hypercall_physdev_op(cmd, arg); + } +} + +static inline long +xencomm_arch_hypercall_opt_feature(struct xencomm_handle *arg) +{ + return _hypercall1(long, opt_feature, arg); +} + +/* for balloon driver */ +#define HYPERVISOR_update_va_mapping(va, new_val, flags) (0) + +/* Use xencomm to do hypercalls. */ +#define HYPERVISOR_sched_op xencomm_hypercall_sched_op +#define HYPERVISOR_event_channel_op xencomm_hypercall_event_channel_op +#define HYPERVISOR_callback_op xencomm_hypercall_callback_op +#define HYPERVISOR_multicall xencomm_hypercall_multicall +#define HYPERVISOR_xen_version xencomm_hypercall_xen_version +#define HYPERVISOR_console_io xencomm_hypercall_console_io +#define HYPERVISOR_memory_op xencomm_hypercall_memory_op +#define HYPERVISOR_suspend xencomm_hypercall_suspend +#define HYPERVISOR_vcpu_op xencomm_hypercall_vcpu_op +#define HYPERVISOR_opt_feature xencomm_hypercall_opt_feature + +/* to compile gnttab_copy_grant_page() in drivers/xen/core/gnttab.c */ +#define HYPERVISOR_mmu_update(req, count, success_count, domid) ({ BUG(); 0; }) + +static inline int +HYPERVISOR_shutdown( + unsigned int reason) +{ + struct sched_shutdown sched_shutdown = { + .reason = reason + }; + + int rc = HYPERVISOR_sched_op(SCHEDOP_shutdown, &sched_shutdown); + + return rc; +} + +/* for netfront.c, netback.c */ +#define MULTI_UVMFLAGS_INDEX 0 /* XXX any value */ + +static inline void +MULTI_update_va_mapping( + struct multicall_entry *mcl, unsigned long va, + pte_t new_val, unsigned long flags) +{ + mcl->op = __HYPERVISOR_update_va_mapping; + mcl->result = 0; +} + +static inline void +MULTI_grant_table_op(struct multicall_entry *mcl, unsigned int cmd, + void *uop, unsigned int count) +{ + mcl->op = __HYPERVISOR_grant_table_op; + mcl->args[0] = cmd; + mcl->args[1] = (unsigned long)uop; + mcl->args[2] = count; +} + +static inline void +MULTI_mmu_update(struct multicall_entry *mcl, struct mmu_update *req, + int count, int *success_count, domid_t domid) +{ + mcl->op = __HYPERVISOR_mmu_update; + mcl->args[0] = (unsigned long)req; + mcl->args[1] = count; + mcl->args[2] = (unsigned long)success_count; + mcl->args[3] = domid; +} + +#endif /* _ASM_IA64_XEN_HYPERCALL_H */ diff --git a/arch/ia64/include/asm/xen/hypervisor.h b/arch/ia64/include/asm/xen/hypervisor.h new file mode 100644 index 000000000000..7a804e80fc67 --- /dev/null +++ b/arch/ia64/include/asm/xen/hypervisor.h @@ -0,0 +1,89 @@ +/****************************************************************************** + * hypervisor.h + * + * Linux-specific hypervisor handling. + * + * Copyright (c) 2002-2004, K A Fraser + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation; or, when distributed + * separately from the Linux kernel or incorporated into other + * software packages, subject to the following license: + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this source file (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, modify, + * merge, publish, distribute, sublicense, and/or sell copies of the Software, + * and to permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + */ + +#ifndef _ASM_IA64_XEN_HYPERVISOR_H +#define _ASM_IA64_XEN_HYPERVISOR_H + +#ifdef CONFIG_XEN + +#include <linux/init.h> +#include <xen/interface/xen.h> +#include <xen/interface/version.h> /* to compile feature.c */ +#include <xen/features.h> /* to comiple xen-netfront.c */ +#include <asm/xen/hypercall.h> + +/* xen_domain_type is set before executing any C code by early_xen_setup */ +enum xen_domain_type { + XEN_NATIVE, + XEN_PV_DOMAIN, + XEN_HVM_DOMAIN, +}; + +extern enum xen_domain_type xen_domain_type; + +#define xen_domain() (xen_domain_type != XEN_NATIVE) +#define xen_pv_domain() (xen_domain_type == XEN_PV_DOMAIN) +#define xen_initial_domain() (xen_pv_domain() && \ + (xen_start_info->flags & SIF_INITDOMAIN)) +#define xen_hvm_domain() (xen_domain_type == XEN_HVM_DOMAIN) + +/* deprecated. remove this */ +#define is_running_on_xen() (xen_domain_type == XEN_PV_DOMAIN) + +extern struct shared_info *HYPERVISOR_shared_info; +extern struct start_info *xen_start_info; + +void __init xen_setup_vcpu_info_placement(void); +void force_evtchn_callback(void); + +/* for drivers/xen/balloon/balloon.c */ +#ifdef CONFIG_XEN_SCRUB_PAGES +#define scrub_pages(_p, _n) memset((void *)(_p), 0, (_n) << PAGE_SHIFT) +#else +#define scrub_pages(_p, _n) ((void)0) +#endif + +/* For setup_arch() in arch/ia64/kernel/setup.c */ +void xen_ia64_enable_opt_feature(void); + +#else /* CONFIG_XEN */ + +#define xen_domain() (0) +#define xen_pv_domain() (0) +#define xen_initial_domain() (0) +#define xen_hvm_domain() (0) +#define is_running_on_xen() (0) /* deprecated. remove this */ +#endif + +#define is_initial_xendomain() (0) /* deprecated. remove this */ + +#endif /* _ASM_IA64_XEN_HYPERVISOR_H */ diff --git a/arch/ia64/include/asm/xen/inst.h b/arch/ia64/include/asm/xen/inst.h new file mode 100644 index 000000000000..19c2ae1d878a --- /dev/null +++ b/arch/ia64/include/asm/xen/inst.h @@ -0,0 +1,458 @@ +/****************************************************************************** + * arch/ia64/include/asm/xen/inst.h + * + * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp> + * VA Linux Systems Japan K.K. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <asm/xen/privop.h> + +#define ia64_ivt xen_ivt +#define DO_SAVE_MIN XEN_DO_SAVE_MIN + +#define __paravirt_switch_to xen_switch_to +#define __paravirt_leave_syscall xen_leave_syscall +#define __paravirt_work_processed_syscall xen_work_processed_syscall +#define __paravirt_leave_kernel xen_leave_kernel +#define __paravirt_pending_syscall_end xen_work_pending_syscall_end +#define __paravirt_work_processed_syscall_target \ + xen_work_processed_syscall + +#define MOV_FROM_IFA(reg) \ + movl reg = XSI_IFA; \ + ;; \ + ld8 reg = [reg] + +#define MOV_FROM_ITIR(reg) \ + movl reg = XSI_ITIR; \ + ;; \ + ld8 reg = [reg] + +#define MOV_FROM_ISR(reg) \ + movl reg = XSI_ISR; \ + ;; \ + ld8 reg = [reg] + +#define MOV_FROM_IHA(reg) \ + movl reg = XSI_IHA; \ + ;; \ + ld8 reg = [reg] + +#define MOV_FROM_IPSR(pred, reg) \ +(pred) movl reg = XSI_IPSR; \ + ;; \ +(pred) ld8 reg = [reg] + +#define MOV_FROM_IIM(reg) \ + movl reg = XSI_IIM; \ + ;; \ + ld8 reg = [reg] + +#define MOV_FROM_IIP(reg) \ + movl reg = XSI_IIP; \ + ;; \ + ld8 reg = [reg] + +.macro __MOV_FROM_IVR reg, clob + .ifc "\reg", "r8" + XEN_HYPER_GET_IVR + .exitm + .endif + .ifc "\clob", "r8" + XEN_HYPER_GET_IVR + ;; + mov \reg = r8 + .exitm + .endif + + mov \clob = r8 + ;; + XEN_HYPER_GET_IVR + ;; + mov \reg = r8 + ;; + mov r8 = \clob +.endm +#define MOV_FROM_IVR(reg, clob) __MOV_FROM_IVR reg, clob + +.macro __MOV_FROM_PSR pred, reg, clob + .ifc "\reg", "r8" + (\pred) XEN_HYPER_GET_PSR; + .exitm + .endif + .ifc "\clob", "r8" + (\pred) XEN_HYPER_GET_PSR + ;; + (\pred) mov \reg = r8 + .exitm + .endif + + (\pred) mov \clob = r8 + (\pred) XEN_HYPER_GET_PSR + ;; + (\pred) mov \reg = r8 + (\pred) mov r8 = \clob +.endm +#define MOV_FROM_PSR(pred, reg, clob) __MOV_FROM_PSR pred, reg, clob + + +#define MOV_TO_IFA(reg, clob) \ + movl clob = XSI_IFA; \ + ;; \ + st8 [clob] = reg \ + +#define MOV_TO_ITIR(pred, reg, clob) \ +(pred) movl clob = XSI_ITIR; \ + ;; \ +(pred) st8 [clob] = reg + +#define MOV_TO_IHA(pred, reg, clob) \ +(pred) movl clob = XSI_IHA; \ + ;; \ +(pred) st8 [clob] = reg + +#define MOV_TO_IPSR(pred, reg, clob) \ +(pred) movl clob = XSI_IPSR; \ + ;; \ +(pred) st8 [clob] = reg; \ + ;; + +#define MOV_TO_IFS(pred, reg, clob) \ +(pred) movl clob = XSI_IFS; \ + ;; \ +(pred) st8 [clob] = reg; \ + ;; + +#define MOV_TO_IIP(reg, clob) \ + movl clob = XSI_IIP; \ + ;; \ + st8 [clob] = reg + +.macro ____MOV_TO_KR kr, reg, clob0, clob1 + .ifc "\clob0", "r9" + .error "clob0 \clob0 must not be r9" + .endif + .ifc "\clob1", "r8" + .error "clob1 \clob1 must not be r8" + .endif + + .ifnc "\reg", "r9" + .ifnc "\clob1", "r9" + mov \clob1 = r9 + .endif + mov r9 = \reg + .endif + .ifnc "\clob0", "r8" + mov \clob0 = r8 + .endif + mov r8 = \kr + ;; + XEN_HYPER_SET_KR + + .ifnc "\reg", "r9" + .ifnc "\clob1", "r9" + mov r9 = \clob1 + .endif + .endif + .ifnc "\clob0", "r8" + mov r8 = \clob0 + .endif +.endm + +.macro __MOV_TO_KR kr, reg, clob0, clob1 + .ifc "\clob0", "r9" + ____MOV_TO_KR \kr, \reg, \clob1, \clob0 + .exitm + .endif + .ifc "\clob1", "r8" + ____MOV_TO_KR \kr, \reg, \clob1, \clob0 + .exitm + .endif + + ____MOV_TO_KR \kr, \reg, \clob0, \clob1 +.endm + +#define MOV_TO_KR(kr, reg, clob0, clob1) \ + __MOV_TO_KR IA64_KR_ ## kr, reg, clob0, clob1 + + +.macro __ITC_I pred, reg, clob + .ifc "\reg", "r8" + (\pred) XEN_HYPER_ITC_I + .exitm + .endif + .ifc "\clob", "r8" + (\pred) mov r8 = \reg + ;; + (\pred) XEN_HYPER_ITC_I + .exitm + .endif + + (\pred) mov \clob = r8 + (\pred) mov r8 = \reg + ;; + (\pred) XEN_HYPER_ITC_I + ;; + (\pred) mov r8 = \clob + ;; +.endm +#define ITC_I(pred, reg, clob) __ITC_I pred, reg, clob + +.macro __ITC_D pred, reg, clob + .ifc "\reg", "r8" + (\pred) XEN_HYPER_ITC_D + ;; + .exitm + .endif + .ifc "\clob", "r8" + (\pred) mov r8 = \reg + ;; + (\pred) XEN_HYPER_ITC_D + ;; + .exitm + .endif + + (\pred) mov \clob = r8 + (\pred) mov r8 = \reg + ;; + (\pred) XEN_HYPER_ITC_D + ;; + (\pred) mov r8 = \clob + ;; +.endm +#define ITC_D(pred, reg, clob) __ITC_D pred, reg, clob + +.macro __ITC_I_AND_D pred_i, pred_d, reg, clob + .ifc "\reg", "r8" + (\pred_i)XEN_HYPER_ITC_I + ;; + (\pred_d)XEN_HYPER_ITC_D + ;; + .exitm + .endif + .ifc "\clob", "r8" + mov r8 = \reg + ;; + (\pred_i)XEN_HYPER_ITC_I + ;; + (\pred_d)XEN_HYPER_ITC_D + ;; + .exitm + .endif + + mov \clob = r8 + mov r8 = \reg + ;; + (\pred_i)XEN_HYPER_ITC_I + ;; + (\pred_d)XEN_HYPER_ITC_D + ;; + mov r8 = \clob + ;; +.endm +#define ITC_I_AND_D(pred_i, pred_d, reg, clob) \ + __ITC_I_AND_D pred_i, pred_d, reg, clob + +.macro __THASH pred, reg0, reg1, clob + .ifc "\reg0", "r8" + (\pred) mov r8 = \reg1 + (\pred) XEN_HYPER_THASH + .exitm + .endc + .ifc "\reg1", "r8" + (\pred) XEN_HYPER_THASH + ;; + (\pred) mov \reg0 = r8 + ;; + .exitm + .endif + .ifc "\clob", "r8" + (\pred) mov r8 = \reg1 + (\pred) XEN_HYPER_THASH + ;; + (\pred) mov \reg0 = r8 + ;; + .exitm + .endif + + (\pred) mov \clob = r8 + (\pred) mov r8 = \reg1 + (\pred) XEN_HYPER_THASH + ;; + (\pred) mov \reg0 = r8 + (\pred) mov r8 = \clob + ;; +.endm +#define THASH(pred, reg0, reg1, clob) __THASH pred, reg0, reg1, clob + +#define SSM_PSR_IC_AND_DEFAULT_BITS_AND_SRLZ_I(clob0, clob1) \ + mov clob0 = 1; \ + movl clob1 = XSI_PSR_IC; \ + ;; \ + st4 [clob1] = clob0 \ + ;; + +#define SSM_PSR_IC_AND_SRLZ_D(clob0, clob1) \ + ;; \ + srlz.d; \ + mov clob1 = 1; \ + movl clob0 = XSI_PSR_IC; \ + ;; \ + st4 [clob0] = clob1 + +#define RSM_PSR_IC(clob) \ + movl clob = XSI_PSR_IC; \ + ;; \ + st4 [clob] = r0; \ + ;; + +/* pred will be clobbered */ +#define MASK_TO_PEND_OFS (-1) +#define SSM_PSR_I(pred, pred_clob, clob) \ +(pred) movl clob = XSI_PSR_I_ADDR \ + ;; \ +(pred) ld8 clob = [clob] \ + ;; \ + /* if (pred) vpsr.i = 1 */ \ + /* if (pred) (vcpu->vcpu_info->evtchn_upcall_mask)=0 */ \ +(pred) st1 [clob] = r0, MASK_TO_PEND_OFS \ + ;; \ + /* if (vcpu->vcpu_info->evtchn_upcall_pending) */ \ +(pred) ld1 clob = [clob] \ + ;; \ +(pred) cmp.ne.unc pred_clob, p0 = clob, r0 \ + ;; \ +(pred_clob)XEN_HYPER_SSM_I /* do areal ssm psr.i */ + +#define RSM_PSR_I(pred, clob0, clob1) \ + movl clob0 = XSI_PSR_I_ADDR; \ + mov clob1 = 1; \ + ;; \ + ld8 clob0 = [clob0]; \ + ;; \ +(pred) st1 [clob0] = clob1 + +#define RSM_PSR_I_IC(clob0, clob1, clob2) \ + movl clob0 = XSI_PSR_I_ADDR; \ + movl clob1 = XSI_PSR_IC; \ + ;; \ + ld8 clob0 = [clob0]; \ + mov clob2 = 1; \ + ;; \ + /* note: clears both vpsr.i and vpsr.ic! */ \ + st1 [clob0] = clob2; \ + st4 [clob1] = r0; \ + ;; + +#define RSM_PSR_DT \ + XEN_HYPER_RSM_PSR_DT + +#define SSM_PSR_DT_AND_SRLZ_I \ + XEN_HYPER_SSM_PSR_DT + +#define BSW_0(clob0, clob1, clob2) \ + ;; \ + /* r16-r31 all now hold bank1 values */ \ + mov clob2 = ar.unat; \ + movl clob0 = XSI_BANK1_R16; \ + movl clob1 = XSI_BANK1_R16 + 8; \ + ;; \ +.mem.offset 0, 0; st8.spill [clob0] = r16, 16; \ +.mem.offset 8, 0; st8.spill [clob1] = r17, 16; \ + ;; \ +.mem.offset 0, 0; st8.spill [clob0] = r18, 16; \ +.mem.offset 8, 0; st8.spill [clob1] = r19, 16; \ + ;; \ +.mem.offset 0, 0; st8.spill [clob0] = r20, 16; \ +.mem.offset 8, 0; st8.spill [clob1] = r21, 16; \ + ;; \ +.mem.offset 0, 0; st8.spill [clob0] = r22, 16; \ +.mem.offset 8, 0; st8.spill [clob1] = r23, 16; \ + ;; \ +.mem.offset 0, 0; st8.spill [clob0] = r24, 16; \ +.mem.offset 8, 0; st8.spill [clob1] = r25, 16; \ + ;; \ +.mem.offset 0, 0; st8.spill [clob0] = r26, 16; \ +.mem.offset 8, 0; st8.spill [clob1] = r27, 16; \ + ;; \ +.mem.offset 0, 0; st8.spill [clob0] = r28, 16; \ +.mem.offset 8, 0; st8.spill [clob1] = r29, 16; \ + ;; \ +.mem.offset 0, 0; st8.spill [clob0] = r30, 16; \ +.mem.offset 8, 0; st8.spill [clob1] = r31, 16; \ + ;; \ + mov clob1 = ar.unat; \ + movl clob0 = XSI_B1NAT; \ + ;; \ + st8 [clob0] = clob1; \ + mov ar.unat = clob2; \ + movl clob0 = XSI_BANKNUM; \ + ;; \ + st4 [clob0] = r0 + + + /* FIXME: THIS CODE IS NOT NaT SAFE! */ +#define XEN_BSW_1(clob) \ + mov clob = ar.unat; \ + movl r30 = XSI_B1NAT; \ + ;; \ + ld8 r30 = [r30]; \ + mov r31 = 1; \ + ;; \ + mov ar.unat = r30; \ + movl r30 = XSI_BANKNUM; \ + ;; \ + st4 [r30] = r31; \ + movl r30 = XSI_BANK1_R16; \ + movl r31 = XSI_BANK1_R16+8; \ + ;; \ + ld8.fill r16 = [r30], 16; \ + ld8.fill r17 = [r31], 16; \ + ;; \ + ld8.fill r18 = [r30], 16; \ + ld8.fill r19 = [r31], 16; \ + ;; \ + ld8.fill r20 = [r30], 16; \ + ld8.fill r21 = [r31], 16; \ + ;; \ + ld8.fill r22 = [r30], 16; \ + ld8.fill r23 = [r31], 16; \ + ;; \ + ld8.fill r24 = [r30], 16; \ + ld8.fill r25 = [r31], 16; \ + ;; \ + ld8.fill r26 = [r30], 16; \ + ld8.fill r27 = [r31], 16; \ + ;; \ + ld8.fill r28 = [r30], 16; \ + ld8.fill r29 = [r31], 16; \ + ;; \ + ld8.fill r30 = [r30]; \ + ld8.fill r31 = [r31]; \ + ;; \ + mov ar.unat = clob + +#define BSW_1(clob0, clob1) XEN_BSW_1(clob1) + + +#define COVER \ + XEN_HYPER_COVER + +#define RFI \ + XEN_HYPER_RFI; \ + dv_serialize_data diff --git a/arch/ia64/include/asm/xen/interface.h b/arch/ia64/include/asm/xen/interface.h new file mode 100644 index 000000000000..f00fab40854d --- /dev/null +++ b/arch/ia64/include/asm/xen/interface.h @@ -0,0 +1,346 @@ +/****************************************************************************** + * arch-ia64/hypervisor-if.h + * + * Guest OS interface to IA64 Xen. + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this software and associated documentation files (the "Software"), to + * deal in the Software without restriction, including without limitation the + * rights to use, copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the Software is + * furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER + * DEALINGS IN THE SOFTWARE. + * + * Copyright by those who contributed. (in alphabetical order) + * + * Anthony Xu <anthony.xu@intel.com> + * Eddie Dong <eddie.dong@intel.com> + * Fred Yang <fred.yang@intel.com> + * Kevin Tian <kevin.tian@intel.com> + * Alex Williamson <alex.williamson@hp.com> + * Chris Wright <chrisw@sous-sol.org> + * Christian Limpach <Christian.Limpach@cl.cam.ac.uk> + * Dietmar Hahn <dietmar.hahn@fujitsu-siemens.com> + * Hollis Blanchard <hollisb@us.ibm.com> + * Isaku Yamahata <yamahata@valinux.co.jp> + * Jan Beulich <jbeulich@novell.com> + * John Levon <john.levon@sun.com> + * Kazuhiro Suzuki <kaz@jp.fujitsu.com> + * Keir Fraser <keir.fraser@citrix.com> + * Kouya Shimura <kouya@jp.fujitsu.com> + * Masaki Kanno <kanno.masaki@jp.fujitsu.com> + * Matt Chapman <matthewc@hp.com> + * Matthew Chapman <matthewc@hp.com> + * Samuel Thibault <samuel.thibault@eu.citrix.com> + * Tomonari Horikoshi <t.horikoshi@jp.fujitsu.com> + * Tristan Gingold <tgingold@free.fr> + * Tsunehisa Doi <Doi.Tsunehisa@jp.fujitsu.com> + * Yutaka Ezaki <yutaka.ezaki@jp.fujitsu.com> + * Zhang Xin <xing.z.zhang@intel.com> + * Zhang xiantao <xiantao.zhang@intel.com> + * dan.magenheimer@hp.com + * ian.pratt@cl.cam.ac.uk + * michael.fetterman@cl.cam.ac.uk + */ + +#ifndef _ASM_IA64_XEN_INTERFACE_H +#define _ASM_IA64_XEN_INTERFACE_H + +#define __DEFINE_GUEST_HANDLE(name, type) \ + typedef struct { type *p; } __guest_handle_ ## name + +#define DEFINE_GUEST_HANDLE_STRUCT(name) \ + __DEFINE_GUEST_HANDLE(name, struct name) +#define DEFINE_GUEST_HANDLE(name) __DEFINE_GUEST_HANDLE(name, name) +#define GUEST_HANDLE(name) __guest_handle_ ## name +#define GUEST_HANDLE_64(name) GUEST_HANDLE(name) +#define set_xen_guest_handle(hnd, val) do { (hnd).p = val; } while (0) + +#ifndef __ASSEMBLY__ +/* Guest handles for primitive C types. */ +__DEFINE_GUEST_HANDLE(uchar, unsigned char); +__DEFINE_GUEST_HANDLE(uint, unsigned int); +__DEFINE_GUEST_HANDLE(ulong, unsigned long); +__DEFINE_GUEST_HANDLE(u64, unsigned long); +DEFINE_GUEST_HANDLE(char); +DEFINE_GUEST_HANDLE(int); +DEFINE_GUEST_HANDLE(long); +DEFINE_GUEST_HANDLE(void); + +typedef unsigned long xen_pfn_t; +DEFINE_GUEST_HANDLE(xen_pfn_t); +#define PRI_xen_pfn "lx" +#endif + +/* Arch specific VIRQs definition */ +#define VIRQ_ITC VIRQ_ARCH_0 /* V. Virtual itc timer */ +#define VIRQ_MCA_CMC VIRQ_ARCH_1 /* MCA cmc interrupt */ +#define VIRQ_MCA_CPE VIRQ_ARCH_2 /* MCA cpe interrupt */ + +/* Maximum number of virtual CPUs in multi-processor guests. */ +/* keep sizeof(struct shared_page) <= PAGE_SIZE. + * this is checked in arch/ia64/xen/hypervisor.c. */ +#define MAX_VIRT_CPUS 64 + +#ifndef __ASSEMBLY__ + +#define INVALID_MFN (~0UL) + +union vac { + unsigned long value; + struct { + int a_int:1; + int a_from_int_cr:1; + int a_to_int_cr:1; + int a_from_psr:1; + int a_from_cpuid:1; + int a_cover:1; + int a_bsw:1; + long reserved:57; + }; +}; + +union vdc { + unsigned long value; + struct { + int d_vmsw:1; + int d_extint:1; + int d_ibr_dbr:1; + int d_pmc:1; + int d_to_pmd:1; + int d_itm:1; + long reserved:58; + }; +}; + +struct mapped_regs { + union vac vac; + union vdc vdc; + unsigned long virt_env_vaddr; + unsigned long reserved1[29]; + unsigned long vhpi; + unsigned long reserved2[95]; + union { + unsigned long vgr[16]; + unsigned long bank1_regs[16]; /* bank1 regs (r16-r31) + when bank0 active */ + }; + union { + unsigned long vbgr[16]; + unsigned long bank0_regs[16]; /* bank0 regs (r16-r31) + when bank1 active */ + }; + unsigned long vnat; + unsigned long vbnat; + unsigned long vcpuid[5]; + unsigned long reserved3[11]; + unsigned long vpsr; + unsigned long vpr; + unsigned long reserved4[76]; + union { + unsigned long vcr[128]; + struct { + unsigned long dcr; /* CR0 */ + unsigned long itm; + unsigned long iva; + unsigned long rsv1[5]; + unsigned long pta; /* CR8 */ + unsigned long rsv2[7]; + unsigned long ipsr; /* CR16 */ + unsigned long isr; + unsigned long rsv3; + unsigned long iip; + unsigned long ifa; + unsigned long itir; + unsigned long iipa; + unsigned long ifs; + unsigned long iim; /* CR24 */ + unsigned long iha; + unsigned long rsv4[38]; + unsigned long lid; /* CR64 */ + unsigned long ivr; + unsigned long tpr; + unsigned long eoi; + unsigned long irr[4]; + unsigned long itv; /* CR72 */ + unsigned long pmv; + unsigned long cmcv; + unsigned long rsv5[5]; + unsigned long lrr0; /* CR80 */ + unsigned long lrr1; + unsigned long rsv6[46]; + }; + }; + union { + unsigned long reserved5[128]; + struct { + unsigned long precover_ifs; + unsigned long unat; /* not sure if this is needed + until NaT arch is done */ + int interrupt_collection_enabled; /* virtual psr.ic */ + + /* virtual interrupt deliverable flag is + * evtchn_upcall_mask in shared info area now. + * interrupt_mask_addr is the address + * of evtchn_upcall_mask for current vcpu + */ + unsigned char *interrupt_mask_addr; + int pending_interruption; + unsigned char vpsr_pp; + unsigned char vpsr_dfh; + unsigned char hpsr_dfh; + unsigned char hpsr_mfh; + unsigned long reserved5_1[4]; + int metaphysical_mode; /* 1 = use metaphys mapping + 0 = use virtual */ + int banknum; /* 0 or 1, which virtual + register bank is active */ + unsigned long rrs[8]; /* region registers */ + unsigned long krs[8]; /* kernel registers */ + unsigned long tmp[16]; /* temp registers + (e.g. for hyperprivops) */ + }; + }; +}; + +struct arch_vcpu_info { + /* nothing */ +}; + +/* + * This structure is used for magic page in domain pseudo physical address + * space and the result of XENMEM_machine_memory_map. + * As the XENMEM_machine_memory_map result, + * xen_memory_map::nr_entries indicates the size in bytes + * including struct xen_ia64_memmap_info. Not the number of entries. + */ +struct xen_ia64_memmap_info { + uint64_t efi_memmap_size; /* size of EFI memory map */ + uint64_t efi_memdesc_size; /* size of an EFI memory map + * descriptor */ + uint32_t efi_memdesc_version; /* memory descriptor version */ + void *memdesc[0]; /* array of efi_memory_desc_t */ +}; + +struct arch_shared_info { + /* PFN of the start_info page. */ + unsigned long start_info_pfn; + + /* Interrupt vector for event channel. */ + int evtchn_vector; + + /* PFN of memmap_info page */ + unsigned int memmap_info_num_pages; /* currently only = 1 case is + supported. */ + unsigned long memmap_info_pfn; + + uint64_t pad[31]; +}; + +struct xen_callback { + unsigned long ip; +}; +typedef struct xen_callback xen_callback_t; + +#endif /* !__ASSEMBLY__ */ + +/* Size of the shared_info area (this is not related to page size). */ +#define XSI_SHIFT 14 +#define XSI_SIZE (1 << XSI_SHIFT) +/* Log size of mapped_regs area (64 KB - only 4KB is used). */ +#define XMAPPEDREGS_SHIFT 12 +#define XMAPPEDREGS_SIZE (1 << XMAPPEDREGS_SHIFT) +/* Offset of XASI (Xen arch shared info) wrt XSI_BASE. */ +#define XMAPPEDREGS_OFS XSI_SIZE + +/* Hyperprivops. */ +#define HYPERPRIVOP_START 0x1 +#define HYPERPRIVOP_RFI (HYPERPRIVOP_START + 0x0) +#define HYPERPRIVOP_RSM_DT (HYPERPRIVOP_START + 0x1) +#define HYPERPRIVOP_SSM_DT (HYPERPRIVOP_START + 0x2) +#define HYPERPRIVOP_COVER (HYPERPRIVOP_START + 0x3) +#define HYPERPRIVOP_ITC_D (HYPERPRIVOP_START + 0x4) +#define HYPERPRIVOP_ITC_I (HYPERPRIVOP_START + 0x5) +#define HYPERPRIVOP_SSM_I (HYPERPRIVOP_START + 0x6) +#define HYPERPRIVOP_GET_IVR (HYPERPRIVOP_START + 0x7) +#define HYPERPRIVOP_GET_TPR (HYPERPRIVOP_START + 0x8) +#define HYPERPRIVOP_SET_TPR (HYPERPRIVOP_START + 0x9) +#define HYPERPRIVOP_EOI (HYPERPRIVOP_START + 0xa) +#define HYPERPRIVOP_SET_ITM (HYPERPRIVOP_START + 0xb) +#define HYPERPRIVOP_THASH (HYPERPRIVOP_START + 0xc) +#define HYPERPRIVOP_PTC_GA (HYPERPRIVOP_START + 0xd) +#define HYPERPRIVOP_ITR_D (HYPERPRIVOP_START + 0xe) +#define HYPERPRIVOP_GET_RR (HYPERPRIVOP_START + 0xf) +#define HYPERPRIVOP_SET_RR (HYPERPRIVOP_START + 0x10) +#define HYPERPRIVOP_SET_KR (HYPERPRIVOP_START + 0x11) +#define HYPERPRIVOP_FC (HYPERPRIVOP_START + 0x12) +#define HYPERPRIVOP_GET_CPUID (HYPERPRIVOP_START + 0x13) +#define HYPERPRIVOP_GET_PMD (HYPERPRIVOP_START + 0x14) +#define HYPERPRIVOP_GET_EFLAG (HYPERPRIVOP_START + 0x15) +#define HYPERPRIVOP_SET_EFLAG (HYPERPRIVOP_START + 0x16) +#define HYPERPRIVOP_RSM_BE (HYPERPRIVOP_START + 0x17) +#define HYPERPRIVOP_GET_PSR (HYPERPRIVOP_START + 0x18) +#define HYPERPRIVOP_SET_RR0_TO_RR4 (HYPERPRIVOP_START + 0x19) +#define HYPERPRIVOP_MAX (0x1a) + +/* Fast and light hypercalls. */ +#define __HYPERVISOR_ia64_fast_eoi __HYPERVISOR_arch_1 + +/* Xencomm macros. */ +#define XENCOMM_INLINE_MASK 0xf800000000000000UL +#define XENCOMM_INLINE_FLAG 0x8000000000000000UL + +#ifndef __ASSEMBLY__ + +/* + * Optimization features. + * The hypervisor may do some special optimizations for guests. This hypercall + * can be used to switch on/of these special optimizations. + */ +#define __HYPERVISOR_opt_feature 0x700UL + +#define XEN_IA64_OPTF_OFF 0x0 +#define XEN_IA64_OPTF_ON 0x1 + +/* + * If this feature is switched on, the hypervisor inserts the + * tlb entries without calling the guests traphandler. + * This is useful in guests using region 7 for identity mapping + * like the linux kernel does. + */ +#define XEN_IA64_OPTF_IDENT_MAP_REG7 1 + +/* Identity mapping of region 4 addresses in HVM. */ +#define XEN_IA64_OPTF_IDENT_MAP_REG4 2 + +/* Identity mapping of region 5 addresses in HVM. */ +#define XEN_IA64_OPTF_IDENT_MAP_REG5 3 + +#define XEN_IA64_OPTF_IDENT_MAP_NOT_SET (0) + +struct xen_ia64_opt_feature { + unsigned long cmd; /* Which feature */ + unsigned char on; /* Switch feature on/off */ + union { + struct { + /* The page protection bit mask of the pte. + * This will be or'ed with the pte. */ + unsigned long pgprot; + unsigned long key; /* A protection key for itir.*/ + }; + }; +}; + +#endif /* __ASSEMBLY__ */ + +#endif /* _ASM_IA64_XEN_INTERFACE_H */ diff --git a/arch/ia64/include/asm/xen/irq.h b/arch/ia64/include/asm/xen/irq.h new file mode 100644 index 000000000000..a90450983003 --- /dev/null +++ b/arch/ia64/include/asm/xen/irq.h @@ -0,0 +1,44 @@ +/****************************************************************************** + * arch/ia64/include/asm/xen/irq.h + * + * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp> + * VA Linux Systems Japan K.K. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef _ASM_IA64_XEN_IRQ_H +#define _ASM_IA64_XEN_IRQ_H + +/* + * The flat IRQ space is divided into two regions: + * 1. A one-to-one mapping of real physical IRQs. This space is only used + * if we have physical device-access privilege. This region is at the + * start of the IRQ space so that existing device drivers do not need + * to be modified to translate physical IRQ numbers into our IRQ space. + * 3. A dynamic mapping of inter-domain and Xen-sourced virtual IRQs. These + * are bound using the provided bind/unbind functions. + */ + +#define XEN_PIRQ_BASE 0 +#define XEN_NR_PIRQS 256 + +#define XEN_DYNIRQ_BASE (XEN_PIRQ_BASE + XEN_NR_PIRQS) +#define XEN_NR_DYNIRQS (NR_CPUS * 8) + +#define XEN_NR_IRQS (XEN_NR_PIRQS + XEN_NR_DYNIRQS) + +#endif /* _ASM_IA64_XEN_IRQ_H */ diff --git a/arch/ia64/include/asm/xen/minstate.h b/arch/ia64/include/asm/xen/minstate.h new file mode 100644 index 000000000000..4d92d9bbda7b --- /dev/null +++ b/arch/ia64/include/asm/xen/minstate.h @@ -0,0 +1,134 @@ +/* + * DO_SAVE_MIN switches to the kernel stacks (if necessary) and saves + * the minimum state necessary that allows us to turn psr.ic back + * on. + * + * Assumed state upon entry: + * psr.ic: off + * r31: contains saved predicates (pr) + * + * Upon exit, the state is as follows: + * psr.ic: off + * r2 = points to &pt_regs.r16 + * r8 = contents of ar.ccv + * r9 = contents of ar.csd + * r10 = contents of ar.ssd + * r11 = FPSR_DEFAULT + * r12 = kernel sp (kernel virtual address) + * r13 = points to current task_struct (kernel virtual address) + * p15 = TRUE if psr.i is set in cr.ipsr + * predicate registers (other than p2, p3, and p15), b6, r3, r14, r15: + * preserved + * CONFIG_XEN note: p6/p7 are not preserved + * + * Note that psr.ic is NOT turned on by this macro. This is so that + * we can pass interruption state as arguments to a handler. + */ +#define XEN_DO_SAVE_MIN(__COVER,SAVE_IFS,EXTRA,WORKAROUND) \ + mov r16=IA64_KR(CURRENT); /* M */ \ + mov r27=ar.rsc; /* M */ \ + mov r20=r1; /* A */ \ + mov r25=ar.unat; /* M */ \ + MOV_FROM_IPSR(p0,r29); /* M */ \ + MOV_FROM_IIP(r28); /* M */ \ + mov r21=ar.fpsr; /* M */ \ + mov r26=ar.pfs; /* I */ \ + __COVER; /* B;; (or nothing) */ \ + adds r16=IA64_TASK_THREAD_ON_USTACK_OFFSET,r16; \ + ;; \ + ld1 r17=[r16]; /* load current->thread.on_ustack flag */ \ + st1 [r16]=r0; /* clear current->thread.on_ustack flag */ \ + adds r1=-IA64_TASK_THREAD_ON_USTACK_OFFSET,r16 \ + /* switch from user to kernel RBS: */ \ + ;; \ + invala; /* M */ \ + /* SAVE_IFS;*/ /* see xen special handling below */ \ + cmp.eq pKStk,pUStk=r0,r17; /* are we in kernel mode already? */ \ + ;; \ +(pUStk) mov ar.rsc=0; /* set enforced lazy mode, pl 0, little-endian, loadrs=0 */ \ + ;; \ +(pUStk) mov.m r24=ar.rnat; \ +(pUStk) addl r22=IA64_RBS_OFFSET,r1; /* compute base of RBS */ \ +(pKStk) mov r1=sp; /* get sp */ \ + ;; \ +(pUStk) lfetch.fault.excl.nt1 [r22]; \ +(pUStk) addl r1=IA64_STK_OFFSET-IA64_PT_REGS_SIZE,r1; /* compute base of memory stack */ \ +(pUStk) mov r23=ar.bspstore; /* save ar.bspstore */ \ + ;; \ +(pUStk) mov ar.bspstore=r22; /* switch to kernel RBS */ \ +(pKStk) addl r1=-IA64_PT_REGS_SIZE,r1; /* if in kernel mode, use sp (r12) */ \ + ;; \ +(pUStk) mov r18=ar.bsp; \ +(pUStk) mov ar.rsc=0x3; /* set eager mode, pl 0, little-endian, loadrs=0 */ \ + adds r17=2*L1_CACHE_BYTES,r1; /* really: biggest cache-line size */ \ + adds r16=PT(CR_IPSR),r1; \ + ;; \ + lfetch.fault.excl.nt1 [r17],L1_CACHE_BYTES; \ + st8 [r16]=r29; /* save cr.ipsr */ \ + ;; \ + lfetch.fault.excl.nt1 [r17]; \ + tbit.nz p15,p0=r29,IA64_PSR_I_BIT; \ + mov r29=b0 \ + ;; \ + WORKAROUND; \ + adds r16=PT(R8),r1; /* initialize first base pointer */ \ + adds r17=PT(R9),r1; /* initialize second base pointer */ \ +(pKStk) mov r18=r0; /* make sure r18 isn't NaT */ \ + ;; \ +.mem.offset 0,0; st8.spill [r16]=r8,16; \ +.mem.offset 8,0; st8.spill [r17]=r9,16; \ + ;; \ +.mem.offset 0,0; st8.spill [r16]=r10,24; \ + movl r8=XSI_PRECOVER_IFS; \ +.mem.offset 8,0; st8.spill [r17]=r11,24; \ + ;; \ + /* xen special handling for possibly lazy cover */ \ + /* SAVE_MIN case in dispatch_ia32_handler: mov r30=r0 */ \ + ld8 r30=[r8]; \ +(pUStk) sub r18=r18,r22; /* r18=RSE.ndirty*8 */ \ + st8 [r16]=r28,16; /* save cr.iip */ \ + ;; \ + st8 [r17]=r30,16; /* save cr.ifs */ \ + mov r8=ar.ccv; \ + mov r9=ar.csd; \ + mov r10=ar.ssd; \ + movl r11=FPSR_DEFAULT; /* L-unit */ \ + ;; \ + st8 [r16]=r25,16; /* save ar.unat */ \ + st8 [r17]=r26,16; /* save ar.pfs */ \ + shl r18=r18,16; /* compute ar.rsc to be used for "loadrs" */ \ + ;; \ + st8 [r16]=r27,16; /* save ar.rsc */ \ +(pUStk) st8 [r17]=r24,16; /* save ar.rnat */ \ +(pKStk) adds r17=16,r17; /* skip over ar_rnat field */ \ + ;; /* avoid RAW on r16 & r17 */ \ +(pUStk) st8 [r16]=r23,16; /* save ar.bspstore */ \ + st8 [r17]=r31,16; /* save predicates */ \ +(pKStk) adds r16=16,r16; /* skip over ar_bspstore field */ \ + ;; \ + st8 [r16]=r29,16; /* save b0 */ \ + st8 [r17]=r18,16; /* save ar.rsc value for "loadrs" */ \ + cmp.eq pNonSys,pSys=r0,r0 /* initialize pSys=0, pNonSys=1 */ \ + ;; \ +.mem.offset 0,0; st8.spill [r16]=r20,16; /* save original r1 */ \ +.mem.offset 8,0; st8.spill [r17]=r12,16; \ + adds r12=-16,r1; /* switch to kernel memory stack (with 16 bytes of scratch) */ \ + ;; \ +.mem.offset 0,0; st8.spill [r16]=r13,16; \ +.mem.offset 8,0; st8.spill [r17]=r21,16; /* save ar.fpsr */ \ + mov r13=IA64_KR(CURRENT); /* establish `current' */ \ + ;; \ +.mem.offset 0,0; st8.spill [r16]=r15,16; \ +.mem.offset 8,0; st8.spill [r17]=r14,16; \ + ;; \ +.mem.offset 0,0; st8.spill [r16]=r2,16; \ +.mem.offset 8,0; st8.spill [r17]=r3,16; \ + ACCOUNT_GET_STAMP \ + adds r2=IA64_PT_REGS_R16_OFFSET,r1; \ + ;; \ + EXTRA; \ + movl r1=__gp; /* establish kernel global pointer */ \ + ;; \ + ACCOUNT_SYS_ENTER \ + BSW_1(r3,r14); /* switch back to bank 1 (must be last in insn group) */ \ + ;; diff --git a/arch/ia64/include/asm/xen/page.h b/arch/ia64/include/asm/xen/page.h new file mode 100644 index 000000000000..03441a780b5b --- /dev/null +++ b/arch/ia64/include/asm/xen/page.h @@ -0,0 +1,65 @@ +/****************************************************************************** + * arch/ia64/include/asm/xen/page.h + * + * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp> + * VA Linux Systems Japan K.K. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef _ASM_IA64_XEN_PAGE_H +#define _ASM_IA64_XEN_PAGE_H + +#define INVALID_P2M_ENTRY (~0UL) + +static inline unsigned long mfn_to_pfn(unsigned long mfn) +{ + return mfn; +} + +static inline unsigned long pfn_to_mfn(unsigned long pfn) +{ + return pfn; +} + +#define phys_to_machine_mapping_valid(_x) (1) + +static inline void *mfn_to_virt(unsigned long mfn) +{ + return __va(mfn << PAGE_SHIFT); +} + +static inline unsigned long virt_to_mfn(void *virt) +{ + return __pa(virt) >> PAGE_SHIFT; +} + +/* for tpmfront.c */ +static inline unsigned long virt_to_machine(void *virt) +{ + return __pa(virt); +} + +static inline void set_phys_to_machine(unsigned long pfn, unsigned long mfn) +{ + /* nothing */ +} + +#define pte_mfn(_x) pte_pfn(_x) +#define mfn_pte(_x, _y) __pte_ma(0) /* unmodified use */ +#define __pte_ma(_x) ((pte_t) {(_x)}) /* unmodified use */ + +#endif /* _ASM_IA64_XEN_PAGE_H */ diff --git a/arch/ia64/include/asm/xen/privop.h b/arch/ia64/include/asm/xen/privop.h new file mode 100644 index 000000000000..71ec7546e100 --- /dev/null +++ b/arch/ia64/include/asm/xen/privop.h @@ -0,0 +1,129 @@ +#ifndef _ASM_IA64_XEN_PRIVOP_H +#define _ASM_IA64_XEN_PRIVOP_H + +/* + * Copyright (C) 2005 Hewlett-Packard Co + * Dan Magenheimer <dan.magenheimer@hp.com> + * + * Paravirtualizations of privileged operations for Xen/ia64 + * + * + * inline privop and paravirt_alt support + * Copyright (c) 2007 Isaku Yamahata <yamahata at valinux co jp> + * VA Linux Systems Japan K.K. + * + */ + +#ifndef __ASSEMBLY__ +#include <linux/types.h> /* arch-ia64.h requires uint64_t */ +#endif +#include <asm/xen/interface.h> + +/* At 1 MB, before per-cpu space but still addressable using addl instead + of movl. */ +#define XSI_BASE 0xfffffffffff00000 + +/* Address of mapped regs. */ +#define XMAPPEDREGS_BASE (XSI_BASE + XSI_SIZE) + +#ifdef __ASSEMBLY__ +#define XEN_HYPER_RFI break HYPERPRIVOP_RFI +#define XEN_HYPER_RSM_PSR_DT break HYPERPRIVOP_RSM_DT +#define XEN_HYPER_SSM_PSR_DT break HYPERPRIVOP_SSM_DT +#define XEN_HYPER_COVER break HYPERPRIVOP_COVER +#define XEN_HYPER_ITC_D break HYPERPRIVOP_ITC_D +#define XEN_HYPER_ITC_I break HYPERPRIVOP_ITC_I +#define XEN_HYPER_SSM_I break HYPERPRIVOP_SSM_I +#define XEN_HYPER_GET_IVR break HYPERPRIVOP_GET_IVR +#define XEN_HYPER_THASH break HYPERPRIVOP_THASH +#define XEN_HYPER_ITR_D break HYPERPRIVOP_ITR_D +#define XEN_HYPER_SET_KR break HYPERPRIVOP_SET_KR +#define XEN_HYPER_GET_PSR break HYPERPRIVOP_GET_PSR +#define XEN_HYPER_SET_RR0_TO_RR4 break HYPERPRIVOP_SET_RR0_TO_RR4 + +#define XSI_IFS (XSI_BASE + XSI_IFS_OFS) +#define XSI_PRECOVER_IFS (XSI_BASE + XSI_PRECOVER_IFS_OFS) +#define XSI_IFA (XSI_BASE + XSI_IFA_OFS) +#define XSI_ISR (XSI_BASE + XSI_ISR_OFS) +#define XSI_IIM (XSI_BASE + XSI_IIM_OFS) +#define XSI_ITIR (XSI_BASE + XSI_ITIR_OFS) +#define XSI_PSR_I_ADDR (XSI_BASE + XSI_PSR_I_ADDR_OFS) +#define XSI_PSR_IC (XSI_BASE + XSI_PSR_IC_OFS) +#define XSI_IPSR (XSI_BASE + XSI_IPSR_OFS) +#define XSI_IIP (XSI_BASE + XSI_IIP_OFS) +#define XSI_B1NAT (XSI_BASE + XSI_B1NATS_OFS) +#define XSI_BANK1_R16 (XSI_BASE + XSI_BANK1_R16_OFS) +#define XSI_BANKNUM (XSI_BASE + XSI_BANKNUM_OFS) +#define XSI_IHA (XSI_BASE + XSI_IHA_OFS) +#endif + +#ifndef __ASSEMBLY__ + +/************************************************/ +/* Instructions paravirtualized for correctness */ +/************************************************/ + +/* "fc" and "thash" are privilege-sensitive instructions, meaning they + * may have different semantics depending on whether they are executed + * at PL0 vs PL!=0. When paravirtualized, these instructions mustn't + * be allowed to execute directly, lest incorrect semantics result. */ +extern void xen_fc(unsigned long addr); +extern unsigned long xen_thash(unsigned long addr); + +/* Note that "ttag" and "cover" are also privilege-sensitive; "ttag" + * is not currently used (though it may be in a long-format VHPT system!) + * and the semantics of cover only change if psr.ic is off which is very + * rare (and currently non-existent outside of assembly code */ + +/* There are also privilege-sensitive registers. These registers are + * readable at any privilege level but only writable at PL0. */ +extern unsigned long xen_get_cpuid(int index); +extern unsigned long xen_get_pmd(int index); + +extern unsigned long xen_get_eflag(void); /* see xen_ia64_getreg */ +extern void xen_set_eflag(unsigned long); /* see xen_ia64_setreg */ + +/************************************************/ +/* Instructions paravirtualized for performance */ +/************************************************/ + +/* Xen uses memory-mapped virtual privileged registers for access to many + * performance-sensitive privileged registers. Some, like the processor + * status register (psr), are broken up into multiple memory locations. + * Others, like "pend", are abstractions based on privileged registers. + * "Pend" is guaranteed to be set if reading cr.ivr would return a + * (non-spurious) interrupt. */ +#define XEN_MAPPEDREGS ((struct mapped_regs *)XMAPPEDREGS_BASE) + +#define XSI_PSR_I \ + (*XEN_MAPPEDREGS->interrupt_mask_addr) +#define xen_get_virtual_psr_i() \ + (!XSI_PSR_I) +#define xen_set_virtual_psr_i(_val) \ + ({ XSI_PSR_I = (uint8_t)(_val) ? 0 : 1; }) +#define xen_set_virtual_psr_ic(_val) \ + ({ XEN_MAPPEDREGS->interrupt_collection_enabled = _val ? 1 : 0; }) +#define xen_get_virtual_pend() \ + (*(((uint8_t *)XEN_MAPPEDREGS->interrupt_mask_addr) - 1)) + +/* Although all privileged operations can be left to trap and will + * be properly handled by Xen, some are frequent enough that we use + * hyperprivops for performance. */ +extern unsigned long xen_get_psr(void); +extern unsigned long xen_get_ivr(void); +extern unsigned long xen_get_tpr(void); +extern void xen_hyper_ssm_i(void); +extern void xen_set_itm(unsigned long); +extern void xen_set_tpr(unsigned long); +extern void xen_eoi(unsigned long); +extern unsigned long xen_get_rr(unsigned long index); +extern void xen_set_rr(unsigned long index, unsigned long val); +extern void xen_set_rr0_to_rr4(unsigned long val0, unsigned long val1, + unsigned long val2, unsigned long val3, + unsigned long val4); +extern void xen_set_kr(unsigned long index, unsigned long val); +extern void xen_ptcga(unsigned long addr, unsigned long size); + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASM_IA64_XEN_PRIVOP_H */ diff --git a/arch/ia64/include/asm/xen/xcom_hcall.h b/arch/ia64/include/asm/xen/xcom_hcall.h new file mode 100644 index 000000000000..20b2950c71b6 --- /dev/null +++ b/arch/ia64/include/asm/xen/xcom_hcall.h @@ -0,0 +1,51 @@ +/* + * Copyright (C) 2006 Tristan Gingold <tristan.gingold@bull.net>, Bull SAS + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_IA64_XEN_XCOM_HCALL_H +#define _ASM_IA64_XEN_XCOM_HCALL_H + +/* These function creates inline or mini descriptor for the parameters and + calls the corresponding xencomm_arch_hypercall_X. + Architectures should defines HYPERVISOR_xxx as xencomm_hypercall_xxx unless + they want to use their own wrapper. */ +extern int xencomm_hypercall_console_io(int cmd, int count, char *str); + +extern int xencomm_hypercall_event_channel_op(int cmd, void *op); + +extern int xencomm_hypercall_xen_version(int cmd, void *arg); + +extern int xencomm_hypercall_physdev_op(int cmd, void *op); + +extern int xencomm_hypercall_grant_table_op(unsigned int cmd, void *op, + unsigned int count); + +extern int xencomm_hypercall_sched_op(int cmd, void *arg); + +extern int xencomm_hypercall_multicall(void *call_list, int nr_calls); + +extern int xencomm_hypercall_callback_op(int cmd, void *arg); + +extern int xencomm_hypercall_memory_op(unsigned int cmd, void *arg); + +extern int xencomm_hypercall_suspend(unsigned long srec); + +extern long xencomm_hypercall_vcpu_op(int cmd, int cpu, void *arg); + +extern long xencomm_hypercall_opt_feature(void *arg); + +#endif /* _ASM_IA64_XEN_XCOM_HCALL_H */ diff --git a/arch/ia64/include/asm/xen/xencomm.h b/arch/ia64/include/asm/xen/xencomm.h new file mode 100644 index 000000000000..cded677bebf2 --- /dev/null +++ b/arch/ia64/include/asm/xen/xencomm.h @@ -0,0 +1,42 @@ +/* + * Copyright (C) 2006 Hollis Blanchard <hollisb@us.ibm.com>, IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#ifndef _ASM_IA64_XEN_XENCOMM_H +#define _ASM_IA64_XEN_XENCOMM_H + +#include <xen/xencomm.h> +#include <asm/pgtable.h> + +/* Must be called before any hypercall. */ +extern void xencomm_initialize(void); +extern int xencomm_is_initialized(void); + +/* Check if virtual contiguity means physical contiguity + * where the passed address is a pointer value in virtual address. + * On ia64, identity mapping area in region 7 or the piece of region 5 + * that is mapped by itr[IA64_TR_KERNEL]/dtr[IA64_TR_KERNEL] + */ +static inline int xencomm_is_phys_contiguous(unsigned long addr) +{ + return (PAGE_OFFSET <= addr && + addr < (PAGE_OFFSET + (1UL << IA64_MAX_PHYS_BITS))) || + (KERNEL_START <= addr && + addr < KERNEL_START + KERNEL_TR_PAGE_SIZE); +} + +#endif /* _ASM_IA64_XEN_XENCOMM_H */ diff --git a/arch/ia64/kernel/Makefile b/arch/ia64/kernel/Makefile index 87fea11aecb7..c381ea954892 100644 --- a/arch/ia64/kernel/Makefile +++ b/arch/ia64/kernel/Makefile @@ -42,6 +42,10 @@ obj-$(CONFIG_IA64_ESI) += esi.o ifneq ($(CONFIG_IA64_ESI),) obj-y += esi_stub.o # must be in kernel proper endif +obj-$(CONFIG_DMAR) += pci-dma.o +ifeq ($(CONFIG_DMAR), y) +obj-$(CONFIG_SWIOTLB) += pci-swiotlb.o +endif # The gate DSO image is built using a special linker script. targets += gate.so gate-syms.o @@ -112,5 +116,23 @@ clean-files += $(objtree)/include/asm-ia64/nr-irqs.h ASM_PARAVIRT_OBJS = ivt.o entry.o define paravirtualized_native AFLAGS_$(1) += -D__IA64_ASM_PARAVIRTUALIZED_NATIVE +AFLAGS_pvchk-sed-$(1) += -D__IA64_ASM_PARAVIRTUALIZED_PVCHECK +extra-y += pvchk-$(1) endef $(foreach obj,$(ASM_PARAVIRT_OBJS),$(eval $(call paravirtualized_native,$(obj)))) + +# +# Checker for paravirtualizations of privileged operations. +# +quiet_cmd_pv_check_sed = PVCHK $@ +define cmd_pv_check_sed + sed -f $(srctree)/arch/$(SRCARCH)/scripts/pvcheck.sed $< > $@ +endef + +$(obj)/pvchk-sed-%.s: $(src)/%.S $(srctree)/arch/$(SRCARCH)/scripts/pvcheck.sed FORCE + $(call if_changed_dep,as_s_S) +$(obj)/pvchk-%.s: $(obj)/pvchk-sed-%.s FORCE + $(call if_changed,pv_check_sed) +$(obj)/pvchk-%.o: $(obj)/pvchk-%.s FORCE + $(call if_changed,as_o_S) +.PRECIOUS: $(obj)/pvchk-sed-%.s $(obj)/pvchk-%.s $(obj)/pvchk-%.o diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 5d1eb7ee2bf6..0635015d0aaa 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -52,6 +52,7 @@ #include <asm/numa.h> #include <asm/sal.h> #include <asm/cyclone.h> +#include <asm/xen/hypervisor.h> #define BAD_MADT_ENTRY(entry, end) ( \ (!entry) || (unsigned long)entry + sizeof(*entry) > end || \ @@ -91,6 +92,9 @@ acpi_get_sysname(void) struct acpi_table_rsdp *rsdp; struct acpi_table_xsdt *xsdt; struct acpi_table_header *hdr; +#ifdef CONFIG_DMAR + u64 i, nentries; +#endif rsdp_phys = acpi_find_rsdp(); if (!rsdp_phys) { @@ -121,7 +125,21 @@ acpi_get_sysname(void) return "uv"; else return "sn2"; + } else if (xen_pv_domain() && !strcmp(hdr->oem_id, "XEN")) { + return "xen"; + } + +#ifdef CONFIG_DMAR + /* Look for Intel IOMMU */ + nentries = (hdr->length - sizeof(*hdr)) / + sizeof(xsdt->table_offset_entry[0]); + for (i = 0; i < nentries; i++) { + hdr = __va(xsdt->table_offset_entry[i]); + if (strncmp(hdr->signature, ACPI_SIG_DMAR, + sizeof(ACPI_SIG_DMAR) - 1) == 0) + return "dig_vtd"; } +#endif return "dig"; #else @@ -137,6 +155,10 @@ acpi_get_sysname(void) return "uv"; # elif defined (CONFIG_IA64_DIG) return "dig"; +# elif defined (CONFIG_IA64_XEN_GUEST) + return "xen"; +# elif defined(CONFIG_IA64_DIG_VTD) + return "dig_vtd"; # else # error Unknown platform. Fix acpi.c. # endif diff --git a/arch/ia64/kernel/asm-offsets.c b/arch/ia64/kernel/asm-offsets.c index 94c44b1ccfd0..742dbb1d5a4f 100644 --- a/arch/ia64/kernel/asm-offsets.c +++ b/arch/ia64/kernel/asm-offsets.c @@ -16,6 +16,9 @@ #include <asm/sigcontext.h> #include <asm/mca.h> +#include <asm/xen/interface.h> +#include <asm/xen/hypervisor.h> + #include "../kernel/sigframe.h" #include "../kernel/fsyscall_gtod_data.h" @@ -286,4 +289,32 @@ void foo(void) offsetof (struct itc_jitter_data_t, itc_jitter)); DEFINE(IA64_ITC_LASTCYCLE_OFFSET, offsetof (struct itc_jitter_data_t, itc_lastcycle)); + +#ifdef CONFIG_XEN + BLANK(); + + DEFINE(XEN_NATIVE_ASM, XEN_NATIVE); + DEFINE(XEN_PV_DOMAIN_ASM, XEN_PV_DOMAIN); + +#define DEFINE_MAPPED_REG_OFS(sym, field) \ + DEFINE(sym, (XMAPPEDREGS_OFS + offsetof(struct mapped_regs, field))) + + DEFINE_MAPPED_REG_OFS(XSI_PSR_I_ADDR_OFS, interrupt_mask_addr); + DEFINE_MAPPED_REG_OFS(XSI_IPSR_OFS, ipsr); + DEFINE_MAPPED_REG_OFS(XSI_IIP_OFS, iip); + DEFINE_MAPPED_REG_OFS(XSI_IFS_OFS, ifs); + DEFINE_MAPPED_REG_OFS(XSI_PRECOVER_IFS_OFS, precover_ifs); + DEFINE_MAPPED_REG_OFS(XSI_ISR_OFS, isr); + DEFINE_MAPPED_REG_OFS(XSI_IFA_OFS, ifa); + DEFINE_MAPPED_REG_OFS(XSI_IIPA_OFS, iipa); + DEFINE_MAPPED_REG_OFS(XSI_IIM_OFS, iim); + DEFINE_MAPPED_REG_OFS(XSI_IHA_OFS, iha); + DEFINE_MAPPED_REG_OFS(XSI_ITIR_OFS, itir); + DEFINE_MAPPED_REG_OFS(XSI_PSR_IC_OFS, interrupt_collection_enabled); + DEFINE_MAPPED_REG_OFS(XSI_BANKNUM_OFS, banknum); + DEFINE_MAPPED_REG_OFS(XSI_BANK0_R16_OFS, bank0_regs[0]); + DEFINE_MAPPED_REG_OFS(XSI_BANK1_R16_OFS, bank1_regs[0]); + DEFINE_MAPPED_REG_OFS(XSI_B0NATS_OFS, vbnat); + DEFINE_MAPPED_REG_OFS(XSI_B1NATS_OFS, vnat); +#endif /* CONFIG_XEN */ } diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 0dd6c1419d8d..7ef0c594f5ed 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -534,6 +534,11 @@ GLOBAL_ENTRY(ia64_trace_syscall) stf.spill [r16]=f10 stf.spill [r17]=f11 br.call.sptk.many rp=syscall_trace_enter // give parent a chance to catch syscall args + cmp.lt p6,p0=r8,r0 // check tracehook + adds r2=PT(R8)+16,sp // r2 = &pt_regs.r8 + adds r3=PT(R10)+16,sp // r3 = &pt_regs.r10 + mov r10=0 +(p6) br.cond.sptk strace_error // syscall failed -> adds r16=PT(F6)+16,sp adds r17=PT(F7)+16,sp ;; diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S index 416a952b19bd..f675d8e33853 100644 --- a/arch/ia64/kernel/ivt.S +++ b/arch/ia64/kernel/ivt.S @@ -580,7 +580,7 @@ ENTRY(dirty_bit) mov b0=r29 // restore b0 ;; st8 [r17]=r18 // store back updated PTE - itc.d r18 // install updated PTE + ITC_D(p0, r18, r16) // install updated PTE #endif mov pr=r31,-1 // restore pr RFI @@ -646,7 +646,7 @@ ENTRY(iaccess_bit) mov b0=r29 // restore b0 ;; st8 [r17]=r18 // store back updated PTE - itc.i r18 // install updated PTE + ITC_I(p0, r18, r16) // install updated PTE #endif /* !CONFIG_SMP */ mov pr=r31,-1 RFI @@ -698,7 +698,7 @@ ENTRY(daccess_bit) or r18=_PAGE_A,r18 // set the accessed bit ;; st8 [r17]=r18 // store back updated PTE - itc.d r18 // install updated PTE + ITC_D(p0, r18, r16) // install updated PTE #endif mov b0=r29 // restore b0 mov pr=r31,-1 diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c index 60c6ef67ebb2..702a09c13238 100644 --- a/arch/ia64/kernel/msi_ia64.c +++ b/arch/ia64/kernel/msi_ia64.c @@ -5,6 +5,7 @@ #include <linux/pci.h> #include <linux/irq.h> #include <linux/msi.h> +#include <linux/dmar.h> #include <asm/smp.h> /* @@ -162,3 +163,82 @@ void arch_teardown_msi_irq(unsigned int irq) return ia64_teardown_msi_irq(irq); } + +#ifdef CONFIG_DMAR +#ifdef CONFIG_SMP +static void dmar_msi_set_affinity(unsigned int irq, cpumask_t mask) +{ + struct irq_cfg *cfg = irq_cfg + irq; + struct msi_msg msg; + int cpu = first_cpu(mask); + + + if (!cpu_online(cpu)) + return; + + if (irq_prepare_move(irq, cpu)) + return; + + dmar_msi_read(irq, &msg); + + msg.data &= ~MSI_DATA_VECTOR_MASK; + msg.data |= MSI_DATA_VECTOR(cfg->vector); + msg.address_lo &= ~MSI_ADDR_DESTID_MASK; + msg.address_lo |= MSI_ADDR_DESTID_CPU(cpu_physical_id(cpu)); + + dmar_msi_write(irq, &msg); + irq_desc[irq].affinity = mask; +} +#endif /* CONFIG_SMP */ + +struct irq_chip dmar_msi_type = { + .name = "DMAR_MSI", + .unmask = dmar_msi_unmask, + .mask = dmar_msi_mask, + .ack = ia64_ack_msi_irq, +#ifdef CONFIG_SMP + .set_affinity = dmar_msi_set_affinity, +#endif + .retrigger = ia64_msi_retrigger_irq, +}; + +static int +msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_msg *msg) +{ + struct irq_cfg *cfg = irq_cfg + irq; + unsigned dest; + cpumask_t mask; + + cpus_and(mask, irq_to_domain(irq), cpu_online_map); + dest = cpu_physical_id(first_cpu(mask)); + + msg->address_hi = 0; + msg->address_lo = + MSI_ADDR_HEADER | + MSI_ADDR_DESTMODE_PHYS | + MSI_ADDR_REDIRECTION_CPU | + MSI_ADDR_DESTID_CPU(dest); + + msg->data = + MSI_DATA_TRIGGER_EDGE | + MSI_DATA_LEVEL_ASSERT | + MSI_DATA_DELIVERY_FIXED | + MSI_DATA_VECTOR(cfg->vector); + return 0; +} + +int arch_setup_dmar_msi(unsigned int irq) +{ + int ret; + struct msi_msg msg; + + ret = msi_compose_msg(NULL, irq, &msg); + if (ret < 0) + return ret; + dmar_msi_write(irq, &msg); + set_irq_chip_and_handler_name(irq, &dmar_msi_type, handle_edge_irq, + "edge"); + return 0; +} +#endif /* CONFIG_DMAR */ + diff --git a/arch/ia64/kernel/nr-irqs.c b/arch/ia64/kernel/nr-irqs.c index 8273afc32db8..ee564575148e 100644 --- a/arch/ia64/kernel/nr-irqs.c +++ b/arch/ia64/kernel/nr-irqs.c @@ -10,6 +10,7 @@ #include <linux/kbuild.h> #include <linux/threads.h> #include <asm/native/irq.h> +#include <asm/xen/irq.h> void foo(void) { diff --git a/arch/ia64/kernel/paravirt.c b/arch/ia64/kernel/paravirt.c index afaf5b9a2cf0..de35d8e8b7d2 100644 --- a/arch/ia64/kernel/paravirt.c +++ b/arch/ia64/kernel/paravirt.c @@ -332,7 +332,7 @@ ia64_native_iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val) struct pv_iosapic_ops pv_iosapic_ops = { .pcat_compat_init = ia64_native_iosapic_pcat_compat_init, - .get_irq_chip = ia64_native_iosapic_get_irq_chip, + .__get_irq_chip = ia64_native_iosapic_get_irq_chip, .__read = ia64_native_iosapic_read, .__write = ia64_native_iosapic_write, diff --git a/arch/ia64/kernel/paravirt_inst.h b/arch/ia64/kernel/paravirt_inst.h index 5cad6fb2ed19..64d6d810c64b 100644 --- a/arch/ia64/kernel/paravirt_inst.h +++ b/arch/ia64/kernel/paravirt_inst.h @@ -20,7 +20,9 @@ * */ -#ifdef __IA64_ASM_PARAVIRTUALIZED_XEN +#ifdef __IA64_ASM_PARAVIRTUALIZED_PVCHECK +#include <asm/native/pvchk_inst.h> +#elif defined(__IA64_ASM_PARAVIRTUALIZED_XEN) #include <asm/xen/inst.h> #include <asm/xen/minstate.h> #else diff --git a/arch/ia64/kernel/pci-dma.c b/arch/ia64/kernel/pci-dma.c new file mode 100644 index 000000000000..10a75b557650 --- /dev/null +++ b/arch/ia64/kernel/pci-dma.c @@ -0,0 +1,129 @@ +/* + * Dynamic DMA mapping support. + */ + +#include <linux/types.h> +#include <linux/mm.h> +#include <linux/string.h> +#include <linux/pci.h> +#include <linux/module.h> +#include <linux/dmar.h> +#include <asm/iommu.h> +#include <asm/machvec.h> +#include <linux/dma-mapping.h> + +#include <asm/machvec.h> +#include <asm/system.h> + +#ifdef CONFIG_DMAR + +#include <linux/kernel.h> +#include <linux/string.h> + +#include <asm/page.h> +#include <asm/iommu.h> + +dma_addr_t bad_dma_address __read_mostly; +EXPORT_SYMBOL(bad_dma_address); + +static int iommu_sac_force __read_mostly; + +int no_iommu __read_mostly; +#ifdef CONFIG_IOMMU_DEBUG +int force_iommu __read_mostly = 1; +#else +int force_iommu __read_mostly; +#endif + +/* Set this to 1 if there is a HW IOMMU in the system */ +int iommu_detected __read_mostly; + +/* Dummy device used for NULL arguments (normally ISA). Better would + be probably a smaller DMA mask, but this is bug-to-bug compatible + to i386. */ +struct device fallback_dev = { + .bus_id = "fallback device", + .coherent_dma_mask = DMA_32BIT_MASK, + .dma_mask = &fallback_dev.coherent_dma_mask, +}; + +void __init pci_iommu_alloc(void) +{ + /* + * The order of these functions is important for + * fall-back/fail-over reasons + */ + detect_intel_iommu(); + +#ifdef CONFIG_SWIOTLB + pci_swiotlb_init(); +#endif +} + +static int __init pci_iommu_init(void) +{ + if (iommu_detected) + intel_iommu_init(); + + return 0; +} + +/* Must execute after PCI subsystem */ +fs_initcall(pci_iommu_init); + +void pci_iommu_shutdown(void) +{ + return; +} + +void __init +iommu_dma_init(void) +{ + return; +} + +struct dma_mapping_ops *dma_ops; +EXPORT_SYMBOL(dma_ops); + +int iommu_dma_supported(struct device *dev, u64 mask) +{ + struct dma_mapping_ops *ops = get_dma_ops(dev); + +#ifdef CONFIG_PCI + if (mask > 0xffffffff && forbid_dac > 0) { + dev_info(dev, "Disallowing DAC for device\n"); + return 0; + } +#endif + + if (ops->dma_supported_op) + return ops->dma_supported_op(dev, mask); + + /* Copied from i386. Doesn't make much sense, because it will + only work for pci_alloc_coherent. + The caller just has to use GFP_DMA in this case. */ + if (mask < DMA_24BIT_MASK) + return 0; + + /* Tell the device to use SAC when IOMMU force is on. This + allows the driver to use cheaper accesses in some cases. + + Problem with this is that if we overflow the IOMMU area and + return DAC as fallback address the device may not handle it + correctly. + + As a special case some controllers have a 39bit address + mode that is as efficient as 32bit (aic79xx). Don't force + SAC for these. Assume all masks <= 40 bits are of this + type. Normally this doesn't make any difference, but gives + more gentle handling of IOMMU overflow. */ + if (iommu_sac_force && (mask >= DMA_40BIT_MASK)) { + dev_info(dev, "Force SAC with mask %lx\n", mask); + return 0; + } + + return 1; +} +EXPORT_SYMBOL(iommu_dma_supported); + +#endif diff --git a/arch/ia64/kernel/pci-swiotlb.c b/arch/ia64/kernel/pci-swiotlb.c new file mode 100644 index 000000000000..16c50516dbc1 --- /dev/null +++ b/arch/ia64/kernel/pci-swiotlb.c @@ -0,0 +1,46 @@ +/* Glue code to lib/swiotlb.c */ + +#include <linux/pci.h> +#include <linux/cache.h> +#include <linux/module.h> +#include <linux/dma-mapping.h> + +#include <asm/swiotlb.h> +#include <asm/dma.h> +#include <asm/iommu.h> +#include <asm/machvec.h> + +int swiotlb __read_mostly; +EXPORT_SYMBOL(swiotlb); + +struct dma_mapping_ops swiotlb_dma_ops = { + .mapping_error = swiotlb_dma_mapping_error, + .alloc_coherent = swiotlb_alloc_coherent, + .free_coherent = swiotlb_free_coherent, + .map_single = swiotlb_map_single, + .unmap_single = swiotlb_unmap_single, + .sync_single_for_cpu = swiotlb_sync_single_for_cpu, + .sync_single_for_device = swiotlb_sync_single_for_device, + .sync_single_range_for_cpu = swiotlb_sync_single_range_for_cpu, + .sync_single_range_for_device = swiotlb_sync_single_range_for_device, + .sync_sg_for_cpu = swiotlb_sync_sg_for_cpu, + .sync_sg_for_device = swiotlb_sync_sg_for_device, + .map_sg = swiotlb_map_sg, + .unmap_sg = swiotlb_unmap_sg, + .dma_supported_op = swiotlb_dma_supported, +}; + +void __init pci_swiotlb_init(void) +{ + if (!iommu_detected) { +#ifdef CONFIG_IA64_GENERIC + swiotlb = 1; + printk(KERN_INFO "PCI-DMA: Re-initialize machine vector.\n"); + machvec_init("dig"); + swiotlb_init(); + dma_ops = &swiotlb_dma_ops; +#else + panic("Unable to find Intel IOMMU"); +#endif + } +} diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index fc8f3509df27..ada4605d1223 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -40,6 +40,7 @@ #include <linux/capability.h> #include <linux/rcupdate.h> #include <linux/completion.h> +#include <linux/tracehook.h> #include <asm/errno.h> #include <asm/intrinsics.h> @@ -3684,7 +3685,7 @@ pfm_restart(pfm_context_t *ctx, void *arg, int count, struct pt_regs *regs) PFM_SET_WORK_PENDING(task, 1); - tsk_set_notify_resume(task); + set_notify_resume(task); /* * XXX: send reschedule if task runs on another CPU @@ -5044,8 +5045,6 @@ pfm_handle_work(void) PFM_SET_WORK_PENDING(current, 0); - tsk_clear_notify_resume(current); - regs = task_pt_regs(current); /* @@ -5414,7 +5413,7 @@ pfm_overflow_handler(struct task_struct *task, pfm_context_t *ctx, u64 pmc0, str * when coming from ctxsw, current still points to the * previous task, therefore we must work with task and not current. */ - tsk_set_notify_resume(task); + set_notify_resume(task); } /* * defer until state is changed (shorten spin window). the context is locked diff --git a/arch/ia64/kernel/process.c b/arch/ia64/kernel/process.c index 3ab8373103ec..c57162705147 100644 --- a/arch/ia64/kernel/process.c +++ b/arch/ia64/kernel/process.c @@ -28,6 +28,7 @@ #include <linux/delay.h> #include <linux/kdebug.h> #include <linux/utsname.h> +#include <linux/tracehook.h> #include <asm/cpu.h> #include <asm/delay.h> @@ -160,21 +161,6 @@ show_regs (struct pt_regs *regs) show_stack(NULL, NULL); } -void tsk_clear_notify_resume(struct task_struct *tsk) -{ -#ifdef CONFIG_PERFMON - if (tsk->thread.pfm_needs_checking) - return; -#endif - if (test_ti_thread_flag(task_thread_info(tsk), TIF_RESTORE_RSE)) - return; - clear_ti_thread_flag(task_thread_info(tsk), TIF_NOTIFY_RESUME); -} - -/* - * do_notify_resume_user(): - * Called from notify_resume_user at entry.S, with interrupts disabled. - */ void do_notify_resume_user(sigset_t *unused, struct sigscratch *scr, long in_syscall) { @@ -203,6 +189,11 @@ do_notify_resume_user(sigset_t *unused, struct sigscratch *scr, long in_syscall) ia64_do_signal(scr, in_syscall); } + if (test_thread_flag(TIF_NOTIFY_RESUME)) { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(&scr->pt); + } + /* copy user rbs to kernel rbs */ if (unlikely(test_thread_flag(TIF_RESTORE_RSE))) { local_irq_enable(); /* force interrupt enable */ @@ -251,7 +242,6 @@ default_idle (void) /* We don't actually take CPU down, just spin without interrupts. */ static inline void play_dead(void) { - extern void ia64_cpu_local_tick (void); unsigned int this_cpu = smp_processor_id(); /* Ack it */ diff --git a/arch/ia64/kernel/ptrace.c b/arch/ia64/kernel/ptrace.c index 2a9943b5947f..92c9689b7d97 100644 --- a/arch/ia64/kernel/ptrace.c +++ b/arch/ia64/kernel/ptrace.c @@ -22,6 +22,7 @@ #include <linux/signal.h> #include <linux/regset.h> #include <linux/elf.h> +#include <linux/tracehook.h> #include <asm/pgtable.h> #include <asm/processor.h> @@ -603,7 +604,7 @@ void ia64_ptrace_stop(void) { if (test_and_set_tsk_thread_flag(current, TIF_RESTORE_RSE)) return; - tsk_set_notify_resume(current); + set_notify_resume(current); unw_init_running(do_sync_rbs, ia64_sync_user_rbs); } @@ -613,7 +614,6 @@ void ia64_ptrace_stop(void) void ia64_sync_krbs(void) { clear_tsk_thread_flag(current, TIF_RESTORE_RSE); - tsk_clear_notify_resume(current); unw_init_running(do_sync_rbs, ia64_sync_kernel_rbs); } @@ -644,7 +644,7 @@ ptrace_attach_sync_user_rbs (struct task_struct *child) spin_lock_irq(&child->sighand->siglock); if (child->state == TASK_STOPPED && !test_and_set_tsk_thread_flag(child, TIF_RESTORE_RSE)) { - tsk_set_notify_resume(child); + set_notify_resume(child); child->state = TASK_TRACED; stopped = 1; @@ -1232,37 +1232,16 @@ arch_ptrace (struct task_struct *child, long request, long addr, long data) } -static void -syscall_trace (void) -{ - /* - * The 0x80 provides a way for the tracing parent to - * distinguish between a syscall stop and SIGTRAP delivery. - */ - ptrace_notify(SIGTRAP - | ((current->ptrace & PT_TRACESYSGOOD) ? 0x80 : 0)); - - /* - * This isn't the same as continuing with a signal, but it - * will do for normal use. strace only continues with a - * signal if the stopping signal is not SIGTRAP. -brl - */ - if (current->exit_code) { - send_sig(current->exit_code, current, 1); - current->exit_code = 0; - } -} - /* "asmlinkage" so the input arguments are preserved... */ -asmlinkage void +asmlinkage long syscall_trace_enter (long arg0, long arg1, long arg2, long arg3, long arg4, long arg5, long arg6, long arg7, struct pt_regs regs) { - if (test_thread_flag(TIF_SYSCALL_TRACE) - && (current->ptrace & PT_PTRACED)) - syscall_trace(); + if (test_thread_flag(TIF_SYSCALL_TRACE)) + if (tracehook_report_syscall_entry(®s)) + return -ENOSYS; /* copy user rbs to kernel rbs */ if (test_thread_flag(TIF_RESTORE_RSE)) @@ -1283,6 +1262,7 @@ syscall_trace_enter (long arg0, long arg1, long arg2, long arg3, audit_syscall_entry(arch, syscall, arg0, arg1, arg2, arg3); } + return 0; } /* "asmlinkage" so the input arguments are preserved... */ @@ -1292,6 +1272,8 @@ syscall_trace_leave (long arg0, long arg1, long arg2, long arg3, long arg4, long arg5, long arg6, long arg7, struct pt_regs regs) { + int step; + if (unlikely(current->audit_context)) { int success = AUDITSC_RESULT(regs.r10); long result = regs.r8; @@ -1301,10 +1283,9 @@ syscall_trace_leave (long arg0, long arg1, long arg2, long arg3, audit_syscall_exit(success, result); } - if ((test_thread_flag(TIF_SYSCALL_TRACE) - || test_thread_flag(TIF_SINGLESTEP)) - && (current->ptrace & PT_PTRACED)) - syscall_trace(); + step = test_thread_flag(TIF_SINGLESTEP); + if (step || test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall_exit(®s, step); /* copy user rbs to kernel rbs */ if (test_thread_flag(TIF_RESTORE_RSE)) @@ -1940,7 +1921,7 @@ gpregs_writeback(struct task_struct *target, { if (test_and_set_tsk_thread_flag(target, TIF_RESTORE_RSE)) return 0; - tsk_set_notify_resume(target); + set_notify_resume(target); return do_regset_call(do_gpregs_writeback, target, regset, 0, 0, NULL, NULL); } @@ -2199,3 +2180,68 @@ const struct user_regset_view *task_user_regset_view(struct task_struct *tsk) #endif return &user_ia64_view; } + +struct syscall_get_set_args { + unsigned int i; + unsigned int n; + unsigned long *args; + struct pt_regs *regs; + int rw; +}; + +static void syscall_get_set_args_cb(struct unw_frame_info *info, void *data) +{ + struct syscall_get_set_args *args = data; + struct pt_regs *pt = args->regs; + unsigned long *krbs, cfm, ndirty; + int i, count; + + if (unw_unwind_to_user(info) < 0) + return; + + cfm = pt->cr_ifs; + krbs = (unsigned long *)info->task + IA64_RBS_OFFSET/8; + ndirty = ia64_rse_num_regs(krbs, krbs + (pt->loadrs >> 19)); + + count = 0; + if (in_syscall(pt)) + count = min_t(int, args->n, cfm & 0x7f); + + for (i = 0; i < count; i++) { + if (args->rw) + *ia64_rse_skip_regs(krbs, ndirty + i + args->i) = + args->args[i]; + else + args->args[i] = *ia64_rse_skip_regs(krbs, + ndirty + i + args->i); + } + + if (!args->rw) { + while (i < args->n) { + args->args[i] = 0; + i++; + } + } +} + +void ia64_syscall_get_set_arguments(struct task_struct *task, + struct pt_regs *regs, unsigned int i, unsigned int n, + unsigned long *args, int rw) +{ + struct syscall_get_set_args data = { + .i = i, + .n = n, + .args = args, + .regs = regs, + .rw = rw, + }; + + if (task == current) + unw_init_running(syscall_get_set_args_cb, &data); + else { + struct unw_frame_info ufi; + memset(&ufi, 0, sizeof(ufi)); + unw_init_from_blocked_task(&ufi, task); + syscall_get_set_args_cb(&ufi, &data); + } +} diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 916ba898237f..ae7911702bf8 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -116,6 +116,13 @@ unsigned int num_io_spaces; */ #define I_CACHE_STRIDE_SHIFT 5 /* Safest way to go: 32 bytes by 32 bytes */ unsigned long ia64_i_cache_stride_shift = ~0; +/* + * "clflush_cache_range()" needs to know what processor dependent stride size to + * use when it flushes cache lines including both d-cache and i-cache. + */ +/* Safest way to go: 32 bytes by 32 bytes */ +#define CACHE_STRIDE_SHIFT 5 +unsigned long ia64_cache_stride_shift = ~0; /* * The merge_mask variable needs to be set to (max(iommu_page_size(iommu)) - 1). This @@ -852,13 +859,14 @@ setup_per_cpu_areas (void) } /* - * Calculate the max. cache line size. + * Do the following calculations: * - * In addition, the minimum of the i-cache stride sizes is calculated for - * "flush_icache_range()". + * 1. the max. cache line size. + * 2. the minimum of the i-cache stride sizes for "flush_icache_range()". + * 3. the minimum of the cache stride sizes for "clflush_cache_range()". */ static void __cpuinit -get_max_cacheline_size (void) +get_cache_info(void) { unsigned long line_size, max = 1; u64 l, levels, unique_caches; @@ -872,12 +880,14 @@ get_max_cacheline_size (void) max = SMP_CACHE_BYTES; /* Safest setup for "flush_icache_range()" */ ia64_i_cache_stride_shift = I_CACHE_STRIDE_SHIFT; + /* Safest setup for "clflush_cache_range()" */ + ia64_cache_stride_shift = CACHE_STRIDE_SHIFT; goto out; } for (l = 0; l < levels; ++l) { - status = ia64_pal_cache_config_info(l, /* cache_type (data_or_unified)= */ 2, - &cci); + /* cache_type (data_or_unified)=2 */ + status = ia64_pal_cache_config_info(l, 2, &cci); if (status != 0) { printk(KERN_ERR "%s: ia64_pal_cache_config_info(l=%lu, 2) failed (status=%ld)\n", @@ -885,15 +895,21 @@ get_max_cacheline_size (void) max = SMP_CACHE_BYTES; /* The safest setup for "flush_icache_range()" */ cci.pcci_stride = I_CACHE_STRIDE_SHIFT; + /* The safest setup for "clflush_cache_range()" */ + ia64_cache_stride_shift = CACHE_STRIDE_SHIFT; cci.pcci_unified = 1; + } else { + if (cci.pcci_stride < ia64_cache_stride_shift) + ia64_cache_stride_shift = cci.pcci_stride; + + line_size = 1 << cci.pcci_line_size; + if (line_size > max) + max = line_size; } - line_size = 1 << cci.pcci_line_size; - if (line_size > max) - max = line_size; + if (!cci.pcci_unified) { - status = ia64_pal_cache_config_info(l, - /* cache_type (instruction)= */ 1, - &cci); + /* cache_type (instruction)=1*/ + status = ia64_pal_cache_config_info(l, 1, &cci); if (status != 0) { printk(KERN_ERR "%s: ia64_pal_cache_config_info(l=%lu, 1) failed (status=%ld)\n", @@ -947,7 +963,7 @@ cpu_init (void) } #endif - get_max_cacheline_size(); + get_cache_info(); /* * We can't pass "local_cpu_data" to identify_cpu() because we haven't called diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c index 19c5a78636fc..e12500a9c443 100644 --- a/arch/ia64/kernel/signal.c +++ b/arch/ia64/kernel/signal.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <linux/mm.h> #include <linux/ptrace.h> +#include <linux/tracehook.h> #include <linux/sched.h> #include <linux/signal.h> #include <linux/smp.h> @@ -439,6 +440,13 @@ handle_signal (unsigned long sig, struct k_sigaction *ka, siginfo_t *info, sigse sigaddset(¤t->blocked, sig); recalc_sigpending(); spin_unlock_irq(¤t->sighand->siglock); + + /* + * Let tracing know that we've done the handler setup. + */ + tracehook_signal_handler(sig, info, ka, &scr->pt, + test_thread_flag(TIF_SINGLESTEP)); + return 1; } diff --git a/arch/ia64/lib/flush.S b/arch/ia64/lib/flush.S index 2a0d27f2f21b..1d8c88860063 100644 --- a/arch/ia64/lib/flush.S +++ b/arch/ia64/lib/flush.S @@ -60,3 +60,58 @@ GLOBAL_ENTRY(flush_icache_range) mov ar.lc=r3 // restore ar.lc br.ret.sptk.many rp END(flush_icache_range) + + /* + * clflush_cache_range(start,size) + * + * Flush cache lines from start to start+size-1. + * + * Must deal with range from start to start+size-1 but nothing else + * (need to be careful not to touch addresses that may be + * unmapped). + * + * Note: "in0" and "in1" are preserved for debugging purposes. + */ + .section .kprobes.text,"ax" +GLOBAL_ENTRY(clflush_cache_range) + + .prologue + alloc r2=ar.pfs,2,0,0,0 + movl r3=ia64_cache_stride_shift + mov r21=1 + add r22=in1,in0 + ;; + ld8 r20=[r3] // r20: stride shift + sub r22=r22,r0,1 // last byte address + ;; + shr.u r23=in0,r20 // start / (stride size) + shr.u r22=r22,r20 // (last byte address) / (stride size) + shl r21=r21,r20 // r21: stride size of the i-cache(s) + ;; + sub r8=r22,r23 // number of strides - 1 + shl r24=r23,r20 // r24: addresses for "fc" = + // "start" rounded down to stride + // boundary + .save ar.lc,r3 + mov r3=ar.lc // save ar.lc + ;; + + .body + mov ar.lc=r8 + ;; + /* + * 32 byte aligned loop, even number of (actually 2) bundles + */ +.Loop_fc: + fc r24 // issuable on M0 only + add r24=r21,r24 // we flush "stride size" bytes per iteration + nop.i 0 + br.cloop.sptk.few .Loop_fc + ;; + sync.i + ;; + srlz.i + ;; + mov ar.lc=r3 // restore ar.lc + br.ret.sptk.many rp +END(clflush_cache_range) diff --git a/arch/ia64/mm/tlb.c b/arch/ia64/mm/tlb.c index 8caf42471f0d..bd9818a36b47 100644 --- a/arch/ia64/mm/tlb.c +++ b/arch/ia64/mm/tlb.c @@ -362,9 +362,13 @@ ia64_tlb_init (void) per_cpu(ia64_tr_num, cpu) = vm_info_1.pal_vm_info_1_s.max_dtr_entry+1; if (per_cpu(ia64_tr_num, cpu) > IA64_TR_ALLOC_MAX) { + static int justonce = 1; per_cpu(ia64_tr_num, cpu) = IA64_TR_ALLOC_MAX; - printk(KERN_DEBUG "TR register number exceeds IA64_TR_ALLOC_MAX!" - "IA64_TR_ALLOC_MAX should be extended\n"); + if (justonce) { + justonce = 0; + printk(KERN_DEBUG "TR register number exceeds " + "IA64_TR_ALLOC_MAX!\n"); + } } } diff --git a/arch/ia64/oprofile/init.c b/arch/ia64/oprofile/init.c index 125a602a660d..31b545c35460 100644 --- a/arch/ia64/oprofile/init.c +++ b/arch/ia64/oprofile/init.c @@ -12,11 +12,11 @@ #include <linux/init.h> #include <linux/errno.h> -extern int perfmon_init(struct oprofile_operations * ops); +extern int perfmon_init(struct oprofile_operations *ops); extern void perfmon_exit(void); extern void ia64_backtrace(struct pt_regs * const regs, unsigned int depth); -int __init oprofile_arch_init(struct oprofile_operations * ops) +int __init oprofile_arch_init(struct oprofile_operations *ops) { int ret = -ENODEV; diff --git a/arch/ia64/oprofile/perfmon.c b/arch/ia64/oprofile/perfmon.c index bc41dd32fec6..192d3e8e1f65 100644 --- a/arch/ia64/oprofile/perfmon.c +++ b/arch/ia64/oprofile/perfmon.c @@ -56,7 +56,7 @@ static pfm_buffer_fmt_t oprofile_fmt = { }; -static char * get_cpu_type(void) +static char *get_cpu_type(void) { __u8 family = local_cpu_data->family; @@ -75,7 +75,7 @@ static char * get_cpu_type(void) static int using_perfmon; -int perfmon_init(struct oprofile_operations * ops) +int perfmon_init(struct oprofile_operations *ops) { int ret = pfm_register_buffer_fmt(&oprofile_fmt); if (ret) diff --git a/arch/ia64/scripts/pvcheck.sed b/arch/ia64/scripts/pvcheck.sed new file mode 100644 index 000000000000..ba66ac2e4c60 --- /dev/null +++ b/arch/ia64/scripts/pvcheck.sed @@ -0,0 +1,32 @@ +# +# Checker for paravirtualizations of privileged operations. +# +s/ssm.*psr\.ic.*/.warning \"ssm psr.ic should not be used directly\"/g +s/rsm.*psr\.ic.*/.warning \"rsm psr.ic should not be used directly\"/g +s/ssm.*psr\.i.*/.warning \"ssm psr.i should not be used directly\"/g +s/rsm.*psr\.i.*/.warning \"rsm psr.i should not be used directly\"/g +s/ssm.*psr\.dt.*/.warning \"ssm psr.dt should not be used directly\"/g +s/rsm.*psr\.dt.*/.warning \"rsm psr.dt should not be used directly\"/g +s/mov.*=.*cr\.ifa/.warning \"cr.ifa should not used directly\"/g +s/mov.*=.*cr\.itir/.warning \"cr.itir should not used directly\"/g +s/mov.*=.*cr\.isr/.warning \"cr.isr should not used directly\"/g +s/mov.*=.*cr\.iha/.warning \"cr.iha should not used directly\"/g +s/mov.*=.*cr\.ipsr/.warning \"cr.ipsr should not used directly\"/g +s/mov.*=.*cr\.iim/.warning \"cr.iim should not used directly\"/g +s/mov.*=.*cr\.iip/.warning \"cr.iip should not used directly\"/g +s/mov.*=.*cr\.ivr/.warning \"cr.ivr should not used directly\"/g +s/mov.*=[^\.]*psr/.warning \"psr should not used directly\"/g # avoid ar.fpsr +s/mov.*=.*ar\.eflags/.warning \"ar.eflags should not used directly\"/g +s/mov.*cr\.ifa.*=.*/.warning \"cr.ifa should not used directly\"/g +s/mov.*cr\.itir.*=.*/.warning \"cr.itir should not used directly\"/g +s/mov.*cr\.iha.*=.*/.warning \"cr.iha should not used directly\"/g +s/mov.*cr\.ipsr.*=.*/.warning \"cr.ipsr should not used directly\"/g +s/mov.*cr\.ifs.*=.*/.warning \"cr.ifs should not used directly\"/g +s/mov.*cr\.iip.*=.*/.warning \"cr.iip should not used directly\"/g +s/mov.*cr\.kr.*=.*/.warning \"cr.kr should not used directly\"/g +s/mov.*ar\.eflags.*=.*/.warning \"ar.eflags should not used directly\"/g +s/itc\.i.*/.warning \"itc.i should not be used directly.\"/g +s/itc\.d.*/.warning \"itc.d should not be used directly.\"/g +s/bsw\.0/.warning \"bsw.0 should not be used directly.\"/g +s/bsw\.1/.warning \"bsw.1 should not be used directly.\"/g +s/ptc\.ga.*/.warning \"ptc.ga should not be used directly.\"/g diff --git a/arch/ia64/xen/Kconfig b/arch/ia64/xen/Kconfig new file mode 100644 index 000000000000..f1683a20275b --- /dev/null +++ b/arch/ia64/xen/Kconfig @@ -0,0 +1,26 @@ +# +# This Kconfig describes xen/ia64 options +# + +config XEN + bool "Xen hypervisor support" + default y + depends on PARAVIRT && MCKINLEY && IA64_PAGE_SIZE_16KB && EXPERIMENTAL + select XEN_XENCOMM + select NO_IDLE_HZ + + # those are required to save/restore. + select ARCH_SUSPEND_POSSIBLE + select SUSPEND + select PM_SLEEP + help + Enable Xen hypervisor support. Resulting kernel runs + both as a guest OS on Xen and natively on hardware. + +config XEN_XENCOMM + depends on XEN + bool + +config NO_IDLE_HZ + depends on XEN + bool diff --git a/arch/ia64/xen/Makefile b/arch/ia64/xen/Makefile new file mode 100644 index 000000000000..0ad0224693d9 --- /dev/null +++ b/arch/ia64/xen/Makefile @@ -0,0 +1,22 @@ +# +# Makefile for Xen components +# + +obj-y := hypercall.o xenivt.o xensetup.o xen_pv_ops.o irq_xen.o \ + hypervisor.o xencomm.o xcom_hcall.o grant-table.o time.o suspend.o + +obj-$(CONFIG_IA64_GENERIC) += machvec.o + +AFLAGS_xenivt.o += -D__IA64_ASM_PARAVIRTUALIZED_XEN + +# xen multi compile +ASM_PARAVIRT_MULTI_COMPILE_SRCS = ivt.S entry.S +ASM_PARAVIRT_OBJS = $(addprefix xen-,$(ASM_PARAVIRT_MULTI_COMPILE_SRCS:.S=.o)) +obj-y += $(ASM_PARAVIRT_OBJS) +define paravirtualized_xen +AFLAGS_$(1) += -D__IA64_ASM_PARAVIRTUALIZED_XEN +endef +$(foreach o,$(ASM_PARAVIRT_OBJS),$(eval $(call paravirtualized_xen,$(o)))) + +$(obj)/xen-%.o: $(src)/../kernel/%.S FORCE + $(call if_changed_dep,as_o_S) diff --git a/arch/ia64/xen/grant-table.c b/arch/ia64/xen/grant-table.c new file mode 100644 index 000000000000..777dd9a9108b --- /dev/null +++ b/arch/ia64/xen/grant-table.c @@ -0,0 +1,155 @@ +/****************************************************************************** + * arch/ia64/xen/grant-table.c + * + * Copyright (c) 2006 Isaku Yamahata <yamahata at valinux co jp> + * VA Linux Systems Japan K.K. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/module.h> +#include <linux/vmalloc.h> +#include <linux/mm.h> + +#include <xen/interface/xen.h> +#include <xen/interface/memory.h> +#include <xen/grant_table.h> + +#include <asm/xen/hypervisor.h> + +struct vm_struct *xen_alloc_vm_area(unsigned long size) +{ + int order; + unsigned long virt; + unsigned long nr_pages; + struct vm_struct *area; + + order = get_order(size); + virt = __get_free_pages(GFP_KERNEL, order); + if (virt == 0) + goto err0; + nr_pages = 1 << order; + scrub_pages(virt, nr_pages); + + area = kmalloc(sizeof(*area), GFP_KERNEL); + if (area == NULL) + goto err1; + + area->flags = VM_IOREMAP; + area->addr = (void *)virt; + area->size = size; + area->pages = NULL; + area->nr_pages = nr_pages; + area->phys_addr = 0; /* xenbus_map_ring_valloc uses this field! */ + + return area; + +err1: + free_pages(virt, order); +err0: + return NULL; +} +EXPORT_SYMBOL_GPL(xen_alloc_vm_area); + +void xen_free_vm_area(struct vm_struct *area) +{ + unsigned int order = get_order(area->size); + unsigned long i; + unsigned long phys_addr = __pa(area->addr); + + /* This area is used for foreign page mappping. + * So underlying machine page may not be assigned. */ + for (i = 0; i < (1 << order); i++) { + unsigned long ret; + unsigned long gpfn = (phys_addr >> PAGE_SHIFT) + i; + struct xen_memory_reservation reservation = { + .nr_extents = 1, + .address_bits = 0, + .extent_order = 0, + .domid = DOMID_SELF + }; + set_xen_guest_handle(reservation.extent_start, &gpfn); + ret = HYPERVISOR_memory_op(XENMEM_populate_physmap, + &reservation); + BUG_ON(ret != 1); + } + free_pages((unsigned long)area->addr, order); + kfree(area); +} +EXPORT_SYMBOL_GPL(xen_free_vm_area); + + +/**************************************************************************** + * grant table hack + * cmd: GNTTABOP_xxx + */ + +int arch_gnttab_map_shared(unsigned long *frames, unsigned long nr_gframes, + unsigned long max_nr_gframes, + struct grant_entry **__shared) +{ + *__shared = __va(frames[0] << PAGE_SHIFT); + return 0; +} + +void arch_gnttab_unmap_shared(struct grant_entry *shared, + unsigned long nr_gframes) +{ + /* nothing */ +} + +static void +gnttab_map_grant_ref_pre(struct gnttab_map_grant_ref *uop) +{ + uint32_t flags; + + flags = uop->flags; + + if (flags & GNTMAP_host_map) { + if (flags & GNTMAP_application_map) { + printk(KERN_DEBUG + "GNTMAP_application_map is not supported yet: " + "flags 0x%x\n", flags); + BUG(); + } + if (flags & GNTMAP_contains_pte) { + printk(KERN_DEBUG + "GNTMAP_contains_pte is not supported yet: " + "flags 0x%x\n", flags); + BUG(); + } + } else if (flags & GNTMAP_device_map) { + printk("GNTMAP_device_map is not supported yet 0x%x\n", flags); + BUG(); /* not yet. actually this flag is not used. */ + } else { + BUG(); + } +} + +int +HYPERVISOR_grant_table_op(unsigned int cmd, void *uop, unsigned int count) +{ + if (cmd == GNTTABOP_map_grant_ref) { + unsigned int i; + for (i = 0; i < count; i++) { + gnttab_map_grant_ref_pre( + (struct gnttab_map_grant_ref *)uop + i); + } + } + return xencomm_hypercall_grant_table_op(cmd, uop, count); +} + +EXPORT_SYMBOL(HYPERVISOR_grant_table_op); diff --git a/arch/ia64/xen/hypercall.S b/arch/ia64/xen/hypercall.S new file mode 100644 index 000000000000..d4ff0b9e79f1 --- /dev/null +++ b/arch/ia64/xen/hypercall.S @@ -0,0 +1,91 @@ +/* + * Support routines for Xen hypercalls + * + * Copyright (C) 2005 Dan Magenheimer <dan.magenheimer@hp.com> + * Copyright (C) 2008 Yaozu (Eddie) Dong <eddie.dong@intel.com> + */ + +#include <asm/asmmacro.h> +#include <asm/intrinsics.h> +#include <asm/xen/privop.h> + +/* + * Hypercalls without parameter. + */ +#define __HCALL0(name,hcall) \ + GLOBAL_ENTRY(name); \ + break hcall; \ + br.ret.sptk.many rp; \ + END(name) + +/* + * Hypercalls with 1 parameter. + */ +#define __HCALL1(name,hcall) \ + GLOBAL_ENTRY(name); \ + mov r8=r32; \ + break hcall; \ + br.ret.sptk.many rp; \ + END(name) + +/* + * Hypercalls with 2 parameters. + */ +#define __HCALL2(name,hcall) \ + GLOBAL_ENTRY(name); \ + mov r8=r32; \ + mov r9=r33; \ + break hcall; \ + br.ret.sptk.many rp; \ + END(name) + +__HCALL0(xen_get_psr, HYPERPRIVOP_GET_PSR) +__HCALL0(xen_get_ivr, HYPERPRIVOP_GET_IVR) +__HCALL0(xen_get_tpr, HYPERPRIVOP_GET_TPR) +__HCALL0(xen_hyper_ssm_i, HYPERPRIVOP_SSM_I) + +__HCALL1(xen_set_tpr, HYPERPRIVOP_SET_TPR) +__HCALL1(xen_eoi, HYPERPRIVOP_EOI) +__HCALL1(xen_thash, HYPERPRIVOP_THASH) +__HCALL1(xen_set_itm, HYPERPRIVOP_SET_ITM) +__HCALL1(xen_get_rr, HYPERPRIVOP_GET_RR) +__HCALL1(xen_fc, HYPERPRIVOP_FC) +__HCALL1(xen_get_cpuid, HYPERPRIVOP_GET_CPUID) +__HCALL1(xen_get_pmd, HYPERPRIVOP_GET_PMD) + +__HCALL2(xen_ptcga, HYPERPRIVOP_PTC_GA) +__HCALL2(xen_set_rr, HYPERPRIVOP_SET_RR) +__HCALL2(xen_set_kr, HYPERPRIVOP_SET_KR) + +#ifdef CONFIG_IA32_SUPPORT +__HCALL1(xen_get_eflag, HYPERPRIVOP_GET_EFLAG) +__HCALL1(xen_set_eflag, HYPERPRIVOP_SET_EFLAG) // refer SDM vol1 3.1.8 +#endif /* CONFIG_IA32_SUPPORT */ + +GLOBAL_ENTRY(xen_set_rr0_to_rr4) + mov r8=r32 + mov r9=r33 + mov r10=r34 + mov r11=r35 + mov r14=r36 + XEN_HYPER_SET_RR0_TO_RR4 + br.ret.sptk.many rp + ;; +END(xen_set_rr0_to_rr4) + +GLOBAL_ENTRY(xen_send_ipi) + mov r14=r32 + mov r15=r33 + mov r2=0x400 + break 0x1000 + ;; + br.ret.sptk.many rp + ;; +END(xen_send_ipi) + +GLOBAL_ENTRY(__hypercall) + mov r2=r37 + break 0x1000 + br.ret.sptk.many b0 + ;; +END(__hypercall) diff --git a/arch/ia64/xen/hypervisor.c b/arch/ia64/xen/hypervisor.c new file mode 100644 index 000000000000..cac4d97c0b5a --- /dev/null +++ b/arch/ia64/xen/hypervisor.c @@ -0,0 +1,96 @@ +/****************************************************************************** + * arch/ia64/xen/hypervisor.c + * + * Copyright (c) 2006 Isaku Yamahata <yamahata at valinux co jp> + * VA Linux Systems Japan K.K. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/efi.h> +#include <asm/xen/hypervisor.h> +#include <asm/xen/privop.h> + +#include "irq_xen.h" + +struct shared_info *HYPERVISOR_shared_info __read_mostly = + (struct shared_info *)XSI_BASE; +EXPORT_SYMBOL(HYPERVISOR_shared_info); + +DEFINE_PER_CPU(struct vcpu_info *, xen_vcpu); + +struct start_info *xen_start_info; +EXPORT_SYMBOL(xen_start_info); + +EXPORT_SYMBOL(xen_domain_type); + +EXPORT_SYMBOL(__hypercall); + +/* Stolen from arch/x86/xen/enlighten.c */ +/* + * Flag to determine whether vcpu info placement is available on all + * VCPUs. We assume it is to start with, and then set it to zero on + * the first failure. This is because it can succeed on some VCPUs + * and not others, since it can involve hypervisor memory allocation, + * or because the guest failed to guarantee all the appropriate + * constraints on all VCPUs (ie buffer can't cross a page boundary). + * + * Note that any particular CPU may be using a placed vcpu structure, + * but we can only optimise if the all are. + * + * 0: not available, 1: available + */ + +static void __init xen_vcpu_setup(int cpu) +{ + /* + * WARNING: + * before changing MAX_VIRT_CPUS, + * check that shared_info fits on a page + */ + BUILD_BUG_ON(sizeof(struct shared_info) > PAGE_SIZE); + per_cpu(xen_vcpu, cpu) = &HYPERVISOR_shared_info->vcpu_info[cpu]; +} + +void __init xen_setup_vcpu_info_placement(void) +{ + int cpu; + + for_each_possible_cpu(cpu) + xen_vcpu_setup(cpu); +} + +void __cpuinit +xen_cpu_init(void) +{ + xen_smp_intr_init(); +} + +/************************************************************************** + * opt feature + */ +void +xen_ia64_enable_opt_feature(void) +{ + /* Enable region 7 identity map optimizations in Xen */ + struct xen_ia64_opt_feature optf; + + optf.cmd = XEN_IA64_OPTF_IDENT_MAP_REG7; + optf.on = XEN_IA64_OPTF_ON; + optf.pgprot = pgprot_val(PAGE_KERNEL); + optf.key = 0; /* No key on linux. */ + HYPERVISOR_opt_feature(&optf); +} diff --git a/arch/ia64/xen/irq_xen.c b/arch/ia64/xen/irq_xen.c new file mode 100644 index 000000000000..af93aadb68bb --- /dev/null +++ b/arch/ia64/xen/irq_xen.c @@ -0,0 +1,435 @@ +/****************************************************************************** + * arch/ia64/xen/irq_xen.c + * + * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp> + * VA Linux Systems Japan K.K. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/cpu.h> + +#include <xen/interface/xen.h> +#include <xen/interface/callback.h> +#include <xen/events.h> + +#include <asm/xen/privop.h> + +#include "irq_xen.h" + +/*************************************************************************** + * pv_irq_ops + * irq operations + */ + +static int +xen_assign_irq_vector(int irq) +{ + struct physdev_irq irq_op; + + irq_op.irq = irq; + if (HYPERVISOR_physdev_op(PHYSDEVOP_alloc_irq_vector, &irq_op)) + return -ENOSPC; + + return irq_op.vector; +} + +static void +xen_free_irq_vector(int vector) +{ + struct physdev_irq irq_op; + + if (vector < IA64_FIRST_DEVICE_VECTOR || + vector > IA64_LAST_DEVICE_VECTOR) + return; + + irq_op.vector = vector; + if (HYPERVISOR_physdev_op(PHYSDEVOP_free_irq_vector, &irq_op)) + printk(KERN_WARNING "%s: xen_free_irq_vecotr fail vector=%d\n", + __func__, vector); +} + + +static DEFINE_PER_CPU(int, timer_irq) = -1; +static DEFINE_PER_CPU(int, ipi_irq) = -1; +static DEFINE_PER_CPU(int, resched_irq) = -1; +static DEFINE_PER_CPU(int, cmc_irq) = -1; +static DEFINE_PER_CPU(int, cmcp_irq) = -1; +static DEFINE_PER_CPU(int, cpep_irq) = -1; +#define NAME_SIZE 15 +static DEFINE_PER_CPU(char[NAME_SIZE], timer_name); +static DEFINE_PER_CPU(char[NAME_SIZE], ipi_name); +static DEFINE_PER_CPU(char[NAME_SIZE], resched_name); +static DEFINE_PER_CPU(char[NAME_SIZE], cmc_name); +static DEFINE_PER_CPU(char[NAME_SIZE], cmcp_name); +static DEFINE_PER_CPU(char[NAME_SIZE], cpep_name); +#undef NAME_SIZE + +struct saved_irq { + unsigned int irq; + struct irqaction *action; +}; +/* 16 should be far optimistic value, since only several percpu irqs + * are registered early. + */ +#define MAX_LATE_IRQ 16 +static struct saved_irq saved_percpu_irqs[MAX_LATE_IRQ]; +static unsigned short late_irq_cnt; +static unsigned short saved_irq_cnt; +static int xen_slab_ready; + +#ifdef CONFIG_SMP +/* Dummy stub. Though we may check XEN_RESCHEDULE_VECTOR before __do_IRQ, + * it ends up to issue several memory accesses upon percpu data and + * thus adds unnecessary traffic to other paths. + */ +static irqreturn_t +xen_dummy_handler(int irq, void *dev_id) +{ + + return IRQ_HANDLED; +} + +static struct irqaction xen_ipi_irqaction = { + .handler = handle_IPI, + .flags = IRQF_DISABLED, + .name = "IPI" +}; + +static struct irqaction xen_resched_irqaction = { + .handler = xen_dummy_handler, + .flags = IRQF_DISABLED, + .name = "resched" +}; + +static struct irqaction xen_tlb_irqaction = { + .handler = xen_dummy_handler, + .flags = IRQF_DISABLED, + .name = "tlb_flush" +}; +#endif + +/* + * This is xen version percpu irq registration, which needs bind + * to xen specific evtchn sub-system. One trick here is that xen + * evtchn binding interface depends on kmalloc because related + * port needs to be freed at device/cpu down. So we cache the + * registration on BSP before slab is ready and then deal them + * at later point. For rest instances happening after slab ready, + * we hook them to xen evtchn immediately. + * + * FIXME: MCA is not supported by far, and thus "nomca" boot param is + * required. + */ +static void +__xen_register_percpu_irq(unsigned int cpu, unsigned int vec, + struct irqaction *action, int save) +{ + irq_desc_t *desc; + int irq = 0; + + if (xen_slab_ready) { + switch (vec) { + case IA64_TIMER_VECTOR: + snprintf(per_cpu(timer_name, cpu), + sizeof(per_cpu(timer_name, cpu)), + "%s%d", action->name, cpu); + irq = bind_virq_to_irqhandler(VIRQ_ITC, cpu, + action->handler, action->flags, + per_cpu(timer_name, cpu), action->dev_id); + per_cpu(timer_irq, cpu) = irq; + break; + case IA64_IPI_RESCHEDULE: + snprintf(per_cpu(resched_name, cpu), + sizeof(per_cpu(resched_name, cpu)), + "%s%d", action->name, cpu); + irq = bind_ipi_to_irqhandler(XEN_RESCHEDULE_VECTOR, cpu, + action->handler, action->flags, + per_cpu(resched_name, cpu), action->dev_id); + per_cpu(resched_irq, cpu) = irq; + break; + case IA64_IPI_VECTOR: + snprintf(per_cpu(ipi_name, cpu), + sizeof(per_cpu(ipi_name, cpu)), + "%s%d", action->name, cpu); + irq = bind_ipi_to_irqhandler(XEN_IPI_VECTOR, cpu, + action->handler, action->flags, + per_cpu(ipi_name, cpu), action->dev_id); + per_cpu(ipi_irq, cpu) = irq; + break; + case IA64_CMC_VECTOR: + snprintf(per_cpu(cmc_name, cpu), + sizeof(per_cpu(cmc_name, cpu)), + "%s%d", action->name, cpu); + irq = bind_virq_to_irqhandler(VIRQ_MCA_CMC, cpu, + action->handler, + action->flags, + per_cpu(cmc_name, cpu), + action->dev_id); + per_cpu(cmc_irq, cpu) = irq; + break; + case IA64_CMCP_VECTOR: + snprintf(per_cpu(cmcp_name, cpu), + sizeof(per_cpu(cmcp_name, cpu)), + "%s%d", action->name, cpu); + irq = bind_ipi_to_irqhandler(XEN_CMCP_VECTOR, cpu, + action->handler, + action->flags, + per_cpu(cmcp_name, cpu), + action->dev_id); + per_cpu(cmcp_irq, cpu) = irq; + break; + case IA64_CPEP_VECTOR: + snprintf(per_cpu(cpep_name, cpu), + sizeof(per_cpu(cpep_name, cpu)), + "%s%d", action->name, cpu); + irq = bind_ipi_to_irqhandler(XEN_CPEP_VECTOR, cpu, + action->handler, + action->flags, + per_cpu(cpep_name, cpu), + action->dev_id); + per_cpu(cpep_irq, cpu) = irq; + break; + case IA64_CPE_VECTOR: + case IA64_MCA_RENDEZ_VECTOR: + case IA64_PERFMON_VECTOR: + case IA64_MCA_WAKEUP_VECTOR: + case IA64_SPURIOUS_INT_VECTOR: + /* No need to complain, these aren't supported. */ + break; + default: + printk(KERN_WARNING "Percpu irq %d is unsupported " + "by xen!\n", vec); + break; + } + BUG_ON(irq < 0); + + if (irq > 0) { + /* + * Mark percpu. Without this, migrate_irqs() will + * mark the interrupt for migrations and trigger it + * on cpu hotplug. + */ + desc = irq_desc + irq; + desc->status |= IRQ_PER_CPU; + } + } + + /* For BSP, we cache registered percpu irqs, and then re-walk + * them when initializing APs + */ + if (!cpu && save) { + BUG_ON(saved_irq_cnt == MAX_LATE_IRQ); + saved_percpu_irqs[saved_irq_cnt].irq = vec; + saved_percpu_irqs[saved_irq_cnt].action = action; + saved_irq_cnt++; + if (!xen_slab_ready) + late_irq_cnt++; + } +} + +static void +xen_register_percpu_irq(ia64_vector vec, struct irqaction *action) +{ + __xen_register_percpu_irq(smp_processor_id(), vec, action, 1); +} + +static void +xen_bind_early_percpu_irq(void) +{ + int i; + + xen_slab_ready = 1; + /* There's no race when accessing this cached array, since only + * BSP will face with such step shortly + */ + for (i = 0; i < late_irq_cnt; i++) + __xen_register_percpu_irq(smp_processor_id(), + saved_percpu_irqs[i].irq, + saved_percpu_irqs[i].action, 0); +} + +/* FIXME: There's no obvious point to check whether slab is ready. So + * a hack is used here by utilizing a late time hook. + */ + +#ifdef CONFIG_HOTPLUG_CPU +static int __devinit +unbind_evtchn_callback(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + unsigned int cpu = (unsigned long)hcpu; + + if (action == CPU_DEAD) { + /* Unregister evtchn. */ + if (per_cpu(cpep_irq, cpu) >= 0) { + unbind_from_irqhandler(per_cpu(cpep_irq, cpu), NULL); + per_cpu(cpep_irq, cpu) = -1; + } + if (per_cpu(cmcp_irq, cpu) >= 0) { + unbind_from_irqhandler(per_cpu(cmcp_irq, cpu), NULL); + per_cpu(cmcp_irq, cpu) = -1; + } + if (per_cpu(cmc_irq, cpu) >= 0) { + unbind_from_irqhandler(per_cpu(cmc_irq, cpu), NULL); + per_cpu(cmc_irq, cpu) = -1; + } + if (per_cpu(ipi_irq, cpu) >= 0) { + unbind_from_irqhandler(per_cpu(ipi_irq, cpu), NULL); + per_cpu(ipi_irq, cpu) = -1; + } + if (per_cpu(resched_irq, cpu) >= 0) { + unbind_from_irqhandler(per_cpu(resched_irq, cpu), + NULL); + per_cpu(resched_irq, cpu) = -1; + } + if (per_cpu(timer_irq, cpu) >= 0) { + unbind_from_irqhandler(per_cpu(timer_irq, cpu), NULL); + per_cpu(timer_irq, cpu) = -1; + } + } + return NOTIFY_OK; +} + +static struct notifier_block unbind_evtchn_notifier = { + .notifier_call = unbind_evtchn_callback, + .priority = 0 +}; +#endif + +void xen_smp_intr_init_early(unsigned int cpu) +{ +#ifdef CONFIG_SMP + unsigned int i; + + for (i = 0; i < saved_irq_cnt; i++) + __xen_register_percpu_irq(cpu, saved_percpu_irqs[i].irq, + saved_percpu_irqs[i].action, 0); +#endif +} + +void xen_smp_intr_init(void) +{ +#ifdef CONFIG_SMP + unsigned int cpu = smp_processor_id(); + struct callback_register event = { + .type = CALLBACKTYPE_event, + .address = { .ip = (unsigned long)&xen_event_callback }, + }; + + if (cpu == 0) { + /* Initialization was already done for boot cpu. */ +#ifdef CONFIG_HOTPLUG_CPU + /* Register the notifier only once. */ + register_cpu_notifier(&unbind_evtchn_notifier); +#endif + return; + } + + /* This should be piggyback when setup vcpu guest context */ + BUG_ON(HYPERVISOR_callback_op(CALLBACKOP_register, &event)); +#endif /* CONFIG_SMP */ +} + +void __init +xen_irq_init(void) +{ + struct callback_register event = { + .type = CALLBACKTYPE_event, + .address = { .ip = (unsigned long)&xen_event_callback }, + }; + + xen_init_IRQ(); + BUG_ON(HYPERVISOR_callback_op(CALLBACKOP_register, &event)); + late_time_init = xen_bind_early_percpu_irq; +} + +void +xen_platform_send_ipi(int cpu, int vector, int delivery_mode, int redirect) +{ +#ifdef CONFIG_SMP + /* TODO: we need to call vcpu_up here */ + if (unlikely(vector == ap_wakeup_vector)) { + /* XXX + * This should be in __cpu_up(cpu) in ia64 smpboot.c + * like x86. But don't want to modify it, + * keep it untouched. + */ + xen_smp_intr_init_early(cpu); + + xen_send_ipi(cpu, vector); + /* vcpu_prepare_and_up(cpu); */ + return; + } +#endif + + switch (vector) { + case IA64_IPI_VECTOR: + xen_send_IPI_one(cpu, XEN_IPI_VECTOR); + break; + case IA64_IPI_RESCHEDULE: + xen_send_IPI_one(cpu, XEN_RESCHEDULE_VECTOR); + break; + case IA64_CMCP_VECTOR: + xen_send_IPI_one(cpu, XEN_CMCP_VECTOR); + break; + case IA64_CPEP_VECTOR: + xen_send_IPI_one(cpu, XEN_CPEP_VECTOR); + break; + case IA64_TIMER_VECTOR: { + /* this is used only once by check_sal_cache_flush() + at boot time */ + static int used = 0; + if (!used) { + xen_send_ipi(cpu, IA64_TIMER_VECTOR); + used = 1; + break; + } + /* fallthrough */ + } + default: + printk(KERN_WARNING "Unsupported IPI type 0x%x\n", + vector); + notify_remote_via_irq(0); /* defaults to 0 irq */ + break; + } +} + +static void __init +xen_register_ipi(void) +{ +#ifdef CONFIG_SMP + register_percpu_irq(IA64_IPI_VECTOR, &xen_ipi_irqaction); + register_percpu_irq(IA64_IPI_RESCHEDULE, &xen_resched_irqaction); + register_percpu_irq(IA64_IPI_LOCAL_TLB_FLUSH, &xen_tlb_irqaction); +#endif +} + +static void +xen_resend_irq(unsigned int vector) +{ + (void)resend_irq_on_evtchn(vector); +} + +const struct pv_irq_ops xen_irq_ops __initdata = { + .register_ipi = xen_register_ipi, + + .assign_irq_vector = xen_assign_irq_vector, + .free_irq_vector = xen_free_irq_vector, + .register_percpu_irq = xen_register_percpu_irq, + + .resend_irq = xen_resend_irq, +}; diff --git a/arch/ia64/xen/irq_xen.h b/arch/ia64/xen/irq_xen.h new file mode 100644 index 000000000000..26110f330c87 --- /dev/null +++ b/arch/ia64/xen/irq_xen.h @@ -0,0 +1,34 @@ +/****************************************************************************** + * arch/ia64/xen/irq_xen.h + * + * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp> + * VA Linux Systems Japan K.K. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#ifndef IRQ_XEN_H +#define IRQ_XEN_H + +extern void (*late_time_init)(void); +extern char xen_event_callback; +void __init xen_init_IRQ(void); + +extern const struct pv_irq_ops xen_irq_ops __initdata; +extern void xen_smp_intr_init(void); +extern void xen_send_ipi(int cpu, int vec); + +#endif /* IRQ_XEN_H */ diff --git a/arch/ia64/xen/machvec.c b/arch/ia64/xen/machvec.c new file mode 100644 index 000000000000..4ad588a7c279 --- /dev/null +++ b/arch/ia64/xen/machvec.c @@ -0,0 +1,4 @@ +#define MACHVEC_PLATFORM_NAME xen +#define MACHVEC_PLATFORM_HEADER <asm/machvec_xen.h> +#include <asm/machvec_init.h> + diff --git a/arch/ia64/xen/suspend.c b/arch/ia64/xen/suspend.c new file mode 100644 index 000000000000..fd66b048c6fa --- /dev/null +++ b/arch/ia64/xen/suspend.c @@ -0,0 +1,64 @@ +/****************************************************************************** + * arch/ia64/xen/suspend.c + * + * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp> + * VA Linux Systems Japan K.K. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * suspend/resume + */ + +#include <xen/xen-ops.h> +#include <asm/xen/hypervisor.h> +#include "time.h" + +void +xen_mm_pin_all(void) +{ + /* nothing */ +} + +void +xen_mm_unpin_all(void) +{ + /* nothing */ +} + +void xen_pre_device_suspend(void) +{ + /* nothing */ +} + +void +xen_pre_suspend() +{ + /* nothing */ +} + +void +xen_post_suspend(int suspend_cancelled) +{ + if (suspend_cancelled) + return; + + xen_ia64_enable_opt_feature(); + /* add more if necessary */ +} + +void xen_arch_resume(void) +{ + xen_timer_resume_on_aps(); +} diff --git a/arch/ia64/xen/time.c b/arch/ia64/xen/time.c new file mode 100644 index 000000000000..d15a94c330fb --- /dev/null +++ b/arch/ia64/xen/time.c @@ -0,0 +1,213 @@ +/****************************************************************************** + * arch/ia64/xen/time.c + * + * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp> + * VA Linux Systems Japan K.K. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/delay.h> +#include <linux/kernel_stat.h> +#include <linux/posix-timers.h> +#include <linux/irq.h> +#include <linux/clocksource.h> + +#include <asm/timex.h> + +#include <asm/xen/hypervisor.h> + +#include <xen/interface/vcpu.h> + +#include "../kernel/fsyscall_gtod_data.h" + +DEFINE_PER_CPU(struct vcpu_runstate_info, runstate); +DEFINE_PER_CPU(unsigned long, processed_stolen_time); +DEFINE_PER_CPU(unsigned long, processed_blocked_time); + +/* taken from i386/kernel/time-xen.c */ +static void xen_init_missing_ticks_accounting(int cpu) +{ + struct vcpu_register_runstate_memory_area area; + struct vcpu_runstate_info *runstate = &per_cpu(runstate, cpu); + int rc; + + memset(runstate, 0, sizeof(*runstate)); + + area.addr.v = runstate; + rc = HYPERVISOR_vcpu_op(VCPUOP_register_runstate_memory_area, cpu, + &area); + WARN_ON(rc && rc != -ENOSYS); + + per_cpu(processed_blocked_time, cpu) = runstate->time[RUNSTATE_blocked]; + per_cpu(processed_stolen_time, cpu) = runstate->time[RUNSTATE_runnable] + + runstate->time[RUNSTATE_offline]; +} + +/* + * Runstate accounting + */ +/* stolen from arch/x86/xen/time.c */ +static void get_runstate_snapshot(struct vcpu_runstate_info *res) +{ + u64 state_time; + struct vcpu_runstate_info *state; + + BUG_ON(preemptible()); + + state = &__get_cpu_var(runstate); + + /* + * The runstate info is always updated by the hypervisor on + * the current CPU, so there's no need to use anything + * stronger than a compiler barrier when fetching it. + */ + do { + state_time = state->state_entry_time; + rmb(); + *res = *state; + rmb(); + } while (state->state_entry_time != state_time); +} + +#define NS_PER_TICK (1000000000LL/HZ) + +static unsigned long +consider_steal_time(unsigned long new_itm) +{ + unsigned long stolen, blocked; + unsigned long delta_itm = 0, stolentick = 0; + int cpu = smp_processor_id(); + struct vcpu_runstate_info runstate; + struct task_struct *p = current; + + get_runstate_snapshot(&runstate); + + /* + * Check for vcpu migration effect + * In this case, itc value is reversed. + * This causes huge stolen value. + * This function just checks and reject this effect. + */ + if (!time_after_eq(runstate.time[RUNSTATE_blocked], + per_cpu(processed_blocked_time, cpu))) + blocked = 0; + + if (!time_after_eq(runstate.time[RUNSTATE_runnable] + + runstate.time[RUNSTATE_offline], + per_cpu(processed_stolen_time, cpu))) + stolen = 0; + + if (!time_after(delta_itm + new_itm, ia64_get_itc())) + stolentick = ia64_get_itc() - new_itm; + + do_div(stolentick, NS_PER_TICK); + stolentick++; + + do_div(stolen, NS_PER_TICK); + + if (stolen > stolentick) + stolen = stolentick; + + stolentick -= stolen; + do_div(blocked, NS_PER_TICK); + + if (blocked > stolentick) + blocked = stolentick; + + if (stolen > 0 || blocked > 0) { + account_steal_time(NULL, jiffies_to_cputime(stolen)); + account_steal_time(idle_task(cpu), jiffies_to_cputime(blocked)); + run_local_timers(); + + if (rcu_pending(cpu)) + rcu_check_callbacks(cpu, user_mode(get_irq_regs())); + + scheduler_tick(); + run_posix_cpu_timers(p); + delta_itm += local_cpu_data->itm_delta * (stolen + blocked); + + if (cpu == time_keeper_id) { + write_seqlock(&xtime_lock); + do_timer(stolen + blocked); + local_cpu_data->itm_next = delta_itm + new_itm; + write_sequnlock(&xtime_lock); + } else { + local_cpu_data->itm_next = delta_itm + new_itm; + } + per_cpu(processed_stolen_time, cpu) += NS_PER_TICK * stolen; + per_cpu(processed_blocked_time, cpu) += NS_PER_TICK * blocked; + } + return delta_itm; +} + +static int xen_do_steal_accounting(unsigned long *new_itm) +{ + unsigned long delta_itm; + delta_itm = consider_steal_time(*new_itm); + *new_itm += delta_itm; + if (time_after(*new_itm, ia64_get_itc()) && delta_itm) + return 1; + + return 0; +} + +static void xen_itc_jitter_data_reset(void) +{ + u64 lcycle, ret; + + do { + lcycle = itc_jitter_data.itc_lastcycle; + ret = cmpxchg(&itc_jitter_data.itc_lastcycle, lcycle, 0); + } while (unlikely(ret != lcycle)); +} + +struct pv_time_ops xen_time_ops __initdata = { + .init_missing_ticks_accounting = xen_init_missing_ticks_accounting, + .do_steal_accounting = xen_do_steal_accounting, + .clocksource_resume = xen_itc_jitter_data_reset, +}; + +/* Called after suspend, to resume time. */ +static void xen_local_tick_resume(void) +{ + /* Just trigger a tick. */ + ia64_cpu_local_tick(); + touch_softlockup_watchdog(); +} + +void +xen_timer_resume(void) +{ + unsigned int cpu; + + xen_local_tick_resume(); + + for_each_online_cpu(cpu) + xen_init_missing_ticks_accounting(cpu); +} + +static void ia64_cpu_local_tick_fn(void *unused) +{ + xen_local_tick_resume(); + xen_init_missing_ticks_accounting(smp_processor_id()); +} + +void +xen_timer_resume_on_aps(void) +{ + smp_call_function(&ia64_cpu_local_tick_fn, NULL, 1); +} diff --git a/arch/ia64/xen/time.h b/arch/ia64/xen/time.h new file mode 100644 index 000000000000..f98d7e1a42f0 --- /dev/null +++ b/arch/ia64/xen/time.h @@ -0,0 +1,24 @@ +/****************************************************************************** + * arch/ia64/xen/time.h + * + * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp> + * VA Linux Systems Japan K.K. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +extern struct pv_time_ops xen_time_ops __initdata; +void xen_timer_resume_on_aps(void); diff --git a/arch/ia64/xen/xcom_hcall.c b/arch/ia64/xen/xcom_hcall.c new file mode 100644 index 000000000000..ccaf7431f7c8 --- /dev/null +++ b/arch/ia64/xen/xcom_hcall.c @@ -0,0 +1,441 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + * + * Tristan Gingold <tristan.gingold@bull.net> + * + * Copyright (c) 2007 + * Isaku Yamahata <yamahata at valinux co jp> + * VA Linux Systems Japan K.K. + * consolidate mini and inline version. + */ + +#include <linux/module.h> +#include <xen/interface/xen.h> +#include <xen/interface/memory.h> +#include <xen/interface/grant_table.h> +#include <xen/interface/callback.h> +#include <xen/interface/vcpu.h> +#include <asm/xen/hypervisor.h> +#include <asm/xen/xencomm.h> + +/* Xencomm notes: + * This file defines hypercalls to be used by xencomm. The hypercalls simply + * create inlines or mini descriptors for pointers and then call the raw arch + * hypercall xencomm_arch_hypercall_XXX + * + * If the arch wants to directly use these hypercalls, simply define macros + * in asm/xen/hypercall.h, eg: + * #define HYPERVISOR_sched_op xencomm_hypercall_sched_op + * + * The arch may also define HYPERVISOR_xxx as a function and do more operations + * before/after doing the hypercall. + * + * Note: because only inline or mini descriptors are created these functions + * must only be called with in kernel memory parameters. + */ + +int +xencomm_hypercall_console_io(int cmd, int count, char *str) +{ + /* xen early printk uses console io hypercall before + * xencomm initialization. In that case, we just ignore it. + */ + if (!xencomm_is_initialized()) + return 0; + + return xencomm_arch_hypercall_console_io + (cmd, count, xencomm_map_no_alloc(str, count)); +} +EXPORT_SYMBOL_GPL(xencomm_hypercall_console_io); + +int +xencomm_hypercall_event_channel_op(int cmd, void *op) +{ + struct xencomm_handle *desc; + desc = xencomm_map_no_alloc(op, sizeof(struct evtchn_op)); + if (desc == NULL) + return -EINVAL; + + return xencomm_arch_hypercall_event_channel_op(cmd, desc); +} +EXPORT_SYMBOL_GPL(xencomm_hypercall_event_channel_op); + +int +xencomm_hypercall_xen_version(int cmd, void *arg) +{ + struct xencomm_handle *desc; + unsigned int argsize; + + switch (cmd) { + case XENVER_version: + /* do not actually pass an argument */ + return xencomm_arch_hypercall_xen_version(cmd, 0); + case XENVER_extraversion: + argsize = sizeof(struct xen_extraversion); + break; + case XENVER_compile_info: + argsize = sizeof(struct xen_compile_info); + break; + case XENVER_capabilities: + argsize = sizeof(struct xen_capabilities_info); + break; + case XENVER_changeset: + argsize = sizeof(struct xen_changeset_info); + break; + case XENVER_platform_parameters: + argsize = sizeof(struct xen_platform_parameters); + break; + case XENVER_get_features: + argsize = (arg == NULL) ? 0 : sizeof(struct xen_feature_info); + break; + + default: + printk(KERN_DEBUG + "%s: unknown version op %d\n", __func__, cmd); + return -ENOSYS; + } + + desc = xencomm_map_no_alloc(arg, argsize); + if (desc == NULL) + return -EINVAL; + + return xencomm_arch_hypercall_xen_version(cmd, desc); +} +EXPORT_SYMBOL_GPL(xencomm_hypercall_xen_version); + +int +xencomm_hypercall_physdev_op(int cmd, void *op) +{ + unsigned int argsize; + + switch (cmd) { + case PHYSDEVOP_apic_read: + case PHYSDEVOP_apic_write: + argsize = sizeof(struct physdev_apic); + break; + case PHYSDEVOP_alloc_irq_vector: + case PHYSDEVOP_free_irq_vector: + argsize = sizeof(struct physdev_irq); + break; + case PHYSDEVOP_irq_status_query: + argsize = sizeof(struct physdev_irq_status_query); + break; + + default: + printk(KERN_DEBUG + "%s: unknown physdev op %d\n", __func__, cmd); + return -ENOSYS; + } + + return xencomm_arch_hypercall_physdev_op + (cmd, xencomm_map_no_alloc(op, argsize)); +} + +static int +xencommize_grant_table_op(struct xencomm_mini **xc_area, + unsigned int cmd, void *op, unsigned int count, + struct xencomm_handle **desc) +{ + struct xencomm_handle *desc1; + unsigned int argsize; + + switch (cmd) { + case GNTTABOP_map_grant_ref: + argsize = sizeof(struct gnttab_map_grant_ref); + break; + case GNTTABOP_unmap_grant_ref: + argsize = sizeof(struct gnttab_unmap_grant_ref); + break; + case GNTTABOP_setup_table: + { + struct gnttab_setup_table *setup = op; + + argsize = sizeof(*setup); + + if (count != 1) + return -EINVAL; + desc1 = __xencomm_map_no_alloc + (xen_guest_handle(setup->frame_list), + setup->nr_frames * + sizeof(*xen_guest_handle(setup->frame_list)), + *xc_area); + if (desc1 == NULL) + return -EINVAL; + (*xc_area)++; + set_xen_guest_handle(setup->frame_list, (void *)desc1); + break; + } + case GNTTABOP_dump_table: + argsize = sizeof(struct gnttab_dump_table); + break; + case GNTTABOP_transfer: + argsize = sizeof(struct gnttab_transfer); + break; + case GNTTABOP_copy: + argsize = sizeof(struct gnttab_copy); + break; + case GNTTABOP_query_size: + argsize = sizeof(struct gnttab_query_size); + break; + default: + printk(KERN_DEBUG "%s: unknown hypercall grant table op %d\n", + __func__, cmd); + BUG(); + } + + *desc = __xencomm_map_no_alloc(op, count * argsize, *xc_area); + if (*desc == NULL) + return -EINVAL; + (*xc_area)++; + + return 0; +} + +int +xencomm_hypercall_grant_table_op(unsigned int cmd, void *op, + unsigned int count) +{ + int rc; + struct xencomm_handle *desc; + XENCOMM_MINI_ALIGNED(xc_area, 2); + + rc = xencommize_grant_table_op(&xc_area, cmd, op, count, &desc); + if (rc) + return rc; + + return xencomm_arch_hypercall_grant_table_op(cmd, desc, count); +} +EXPORT_SYMBOL_GPL(xencomm_hypercall_grant_table_op); + +int +xencomm_hypercall_sched_op(int cmd, void *arg) +{ + struct xencomm_handle *desc; + unsigned int argsize; + + switch (cmd) { + case SCHEDOP_yield: + case SCHEDOP_block: + argsize = 0; + break; + case SCHEDOP_shutdown: + argsize = sizeof(struct sched_shutdown); + break; + case SCHEDOP_poll: + { + struct sched_poll *poll = arg; + struct xencomm_handle *ports; + + argsize = sizeof(struct sched_poll); + ports = xencomm_map_no_alloc(xen_guest_handle(poll->ports), + sizeof(*xen_guest_handle(poll->ports))); + + set_xen_guest_handle(poll->ports, (void *)ports); + break; + } + default: + printk(KERN_DEBUG "%s: unknown sched op %d\n", __func__, cmd); + return -ENOSYS; + } + + desc = xencomm_map_no_alloc(arg, argsize); + if (desc == NULL) + return -EINVAL; + + return xencomm_arch_hypercall_sched_op(cmd, desc); +} +EXPORT_SYMBOL_GPL(xencomm_hypercall_sched_op); + +int +xencomm_hypercall_multicall(void *call_list, int nr_calls) +{ + int rc; + int i; + struct multicall_entry *mce; + struct xencomm_handle *desc; + XENCOMM_MINI_ALIGNED(xc_area, nr_calls * 2); + + for (i = 0; i < nr_calls; i++) { + mce = (struct multicall_entry *)call_list + i; + + switch (mce->op) { + case __HYPERVISOR_update_va_mapping: + case __HYPERVISOR_mmu_update: + /* No-op on ia64. */ + break; + case __HYPERVISOR_grant_table_op: + rc = xencommize_grant_table_op + (&xc_area, + mce->args[0], (void *)mce->args[1], + mce->args[2], &desc); + if (rc) + return rc; + mce->args[1] = (unsigned long)desc; + break; + case __HYPERVISOR_memory_op: + default: + printk(KERN_DEBUG + "%s: unhandled multicall op entry op %lu\n", + __func__, mce->op); + return -ENOSYS; + } + } + + desc = xencomm_map_no_alloc(call_list, + nr_calls * sizeof(struct multicall_entry)); + if (desc == NULL) + return -EINVAL; + + return xencomm_arch_hypercall_multicall(desc, nr_calls); +} +EXPORT_SYMBOL_GPL(xencomm_hypercall_multicall); + +int +xencomm_hypercall_callback_op(int cmd, void *arg) +{ + unsigned int argsize; + switch (cmd) { + case CALLBACKOP_register: + argsize = sizeof(struct callback_register); + break; + case CALLBACKOP_unregister: + argsize = sizeof(struct callback_unregister); + break; + default: + printk(KERN_DEBUG + "%s: unknown callback op %d\n", __func__, cmd); + return -ENOSYS; + } + + return xencomm_arch_hypercall_callback_op + (cmd, xencomm_map_no_alloc(arg, argsize)); +} + +static int +xencommize_memory_reservation(struct xencomm_mini *xc_area, + struct xen_memory_reservation *mop) +{ + struct xencomm_handle *desc; + + desc = __xencomm_map_no_alloc(xen_guest_handle(mop->extent_start), + mop->nr_extents * + sizeof(*xen_guest_handle(mop->extent_start)), + xc_area); + if (desc == NULL) + return -EINVAL; + + set_xen_guest_handle(mop->extent_start, (void *)desc); + return 0; +} + +int +xencomm_hypercall_memory_op(unsigned int cmd, void *arg) +{ + GUEST_HANDLE(xen_pfn_t) extent_start_va[2] = { {NULL}, {NULL} }; + struct xen_memory_reservation *xmr = NULL; + int rc; + struct xencomm_handle *desc; + unsigned int argsize; + XENCOMM_MINI_ALIGNED(xc_area, 2); + + switch (cmd) { + case XENMEM_increase_reservation: + case XENMEM_decrease_reservation: + case XENMEM_populate_physmap: + xmr = (struct xen_memory_reservation *)arg; + set_xen_guest_handle(extent_start_va[0], + xen_guest_handle(xmr->extent_start)); + + argsize = sizeof(*xmr); + rc = xencommize_memory_reservation(xc_area, xmr); + if (rc) + return rc; + xc_area++; + break; + + case XENMEM_maximum_ram_page: + argsize = 0; + break; + + case XENMEM_add_to_physmap: + argsize = sizeof(struct xen_add_to_physmap); + break; + + default: + printk(KERN_DEBUG "%s: unknown memory op %d\n", __func__, cmd); + return -ENOSYS; + } + + desc = xencomm_map_no_alloc(arg, argsize); + if (desc == NULL) + return -EINVAL; + + rc = xencomm_arch_hypercall_memory_op(cmd, desc); + + switch (cmd) { + case XENMEM_increase_reservation: + case XENMEM_decrease_reservation: + case XENMEM_populate_physmap: + set_xen_guest_handle(xmr->extent_start, + xen_guest_handle(extent_start_va[0])); + break; + } + + return rc; +} +EXPORT_SYMBOL_GPL(xencomm_hypercall_memory_op); + +int +xencomm_hypercall_suspend(unsigned long srec) +{ + struct sched_shutdown arg; + + arg.reason = SHUTDOWN_suspend; + + return xencomm_arch_hypercall_sched_op( + SCHEDOP_shutdown, xencomm_map_no_alloc(&arg, sizeof(arg))); +} + +long +xencomm_hypercall_vcpu_op(int cmd, int cpu, void *arg) +{ + unsigned int argsize; + switch (cmd) { + case VCPUOP_register_runstate_memory_area: { + struct vcpu_register_runstate_memory_area *area = + (struct vcpu_register_runstate_memory_area *)arg; + argsize = sizeof(*arg); + set_xen_guest_handle(area->addr.h, + (void *)xencomm_map_no_alloc(area->addr.v, + sizeof(area->addr.v))); + break; + } + + default: + printk(KERN_DEBUG "%s: unknown vcpu op %d\n", __func__, cmd); + return -ENOSYS; + } + + return xencomm_arch_hypercall_vcpu_op(cmd, cpu, + xencomm_map_no_alloc(arg, argsize)); +} + +long +xencomm_hypercall_opt_feature(void *arg) +{ + return xencomm_arch_hypercall_opt_feature( + xencomm_map_no_alloc(arg, + sizeof(struct xen_ia64_opt_feature))); +} diff --git a/arch/ia64/xen/xen_pv_ops.c b/arch/ia64/xen/xen_pv_ops.c new file mode 100644 index 000000000000..04cd12350455 --- /dev/null +++ b/arch/ia64/xen/xen_pv_ops.c @@ -0,0 +1,364 @@ +/****************************************************************************** + * arch/ia64/xen/xen_pv_ops.c + * + * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp> + * VA Linux Systems Japan K.K. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + */ + +#include <linux/console.h> +#include <linux/irq.h> +#include <linux/kernel.h> +#include <linux/pm.h> + +#include <asm/xen/hypervisor.h> +#include <asm/xen/xencomm.h> +#include <asm/xen/privop.h> + +#include "irq_xen.h" +#include "time.h" + +/*************************************************************************** + * general info + */ +static struct pv_info xen_info __initdata = { + .kernel_rpl = 2, /* or 1: determin at runtime */ + .paravirt_enabled = 1, + .name = "Xen/ia64", +}; + +#define IA64_RSC_PL_SHIFT 2 +#define IA64_RSC_PL_BIT_SIZE 2 +#define IA64_RSC_PL_MASK \ + (((1UL << IA64_RSC_PL_BIT_SIZE) - 1) << IA64_RSC_PL_SHIFT) + +static void __init +xen_info_init(void) +{ + /* Xenified Linux/ia64 may run on pl = 1 or 2. + * determin at run time. */ + unsigned long rsc = ia64_getreg(_IA64_REG_AR_RSC); + unsigned int rpl = (rsc & IA64_RSC_PL_MASK) >> IA64_RSC_PL_SHIFT; + xen_info.kernel_rpl = rpl; +} + +/*************************************************************************** + * pv_init_ops + * initialization hooks. + */ + +static void +xen_panic_hypercall(struct unw_frame_info *info, void *arg) +{ + current->thread.ksp = (__u64)info->sw - 16; + HYPERVISOR_shutdown(SHUTDOWN_crash); + /* we're never actually going to get here... */ +} + +static int +xen_panic_event(struct notifier_block *this, unsigned long event, void *ptr) +{ + unw_init_running(xen_panic_hypercall, NULL); + /* we're never actually going to get here... */ + return NOTIFY_DONE; +} + +static struct notifier_block xen_panic_block = { + xen_panic_event, NULL, 0 /* try to go last */ +}; + +static void xen_pm_power_off(void) +{ + local_irq_disable(); + HYPERVISOR_shutdown(SHUTDOWN_poweroff); +} + +static void __init +xen_banner(void) +{ + printk(KERN_INFO + "Running on Xen! pl = %d start_info_pfn=0x%lx nr_pages=%ld " + "flags=0x%x\n", + xen_info.kernel_rpl, + HYPERVISOR_shared_info->arch.start_info_pfn, + xen_start_info->nr_pages, xen_start_info->flags); +} + +static int __init +xen_reserve_memory(struct rsvd_region *region) +{ + region->start = (unsigned long)__va( + (HYPERVISOR_shared_info->arch.start_info_pfn << PAGE_SHIFT)); + region->end = region->start + PAGE_SIZE; + return 1; +} + +static void __init +xen_arch_setup_early(void) +{ + struct shared_info *s; + BUG_ON(!xen_pv_domain()); + + s = HYPERVISOR_shared_info; + xen_start_info = __va(s->arch.start_info_pfn << PAGE_SHIFT); + + /* Must be done before any hypercall. */ + xencomm_initialize(); + + xen_setup_features(); + /* Register a call for panic conditions. */ + atomic_notifier_chain_register(&panic_notifier_list, + &xen_panic_block); + pm_power_off = xen_pm_power_off; + + xen_ia64_enable_opt_feature(); +} + +static void __init +xen_arch_setup_console(char **cmdline_p) +{ + add_preferred_console("xenboot", 0, NULL); + add_preferred_console("tty", 0, NULL); + /* use hvc_xen */ + add_preferred_console("hvc", 0, NULL); + +#if !defined(CONFIG_VT) || !defined(CONFIG_DUMMY_CONSOLE) + conswitchp = NULL; +#endif +} + +static int __init +xen_arch_setup_nomca(void) +{ + return 1; +} + +static void __init +xen_post_smp_prepare_boot_cpu(void) +{ + xen_setup_vcpu_info_placement(); +} + +static const struct pv_init_ops xen_init_ops __initdata = { + .banner = xen_banner, + + .reserve_memory = xen_reserve_memory, + + .arch_setup_early = xen_arch_setup_early, + .arch_setup_console = xen_arch_setup_console, + .arch_setup_nomca = xen_arch_setup_nomca, + + .post_smp_prepare_boot_cpu = xen_post_smp_prepare_boot_cpu, +}; + +/*************************************************************************** + * pv_cpu_ops + * intrinsics hooks. + */ + +static void xen_setreg(int regnum, unsigned long val) +{ + switch (regnum) { + case _IA64_REG_AR_KR0 ... _IA64_REG_AR_KR7: + xen_set_kr(regnum - _IA64_REG_AR_KR0, val); + break; +#ifdef CONFIG_IA32_SUPPORT + case _IA64_REG_AR_EFLAG: + xen_set_eflag(val); + break; +#endif + case _IA64_REG_CR_TPR: + xen_set_tpr(val); + break; + case _IA64_REG_CR_ITM: + xen_set_itm(val); + break; + case _IA64_REG_CR_EOI: + xen_eoi(val); + break; + default: + ia64_native_setreg_func(regnum, val); + break; + } +} + +static unsigned long xen_getreg(int regnum) +{ + unsigned long res; + + switch (regnum) { + case _IA64_REG_PSR: + res = xen_get_psr(); + break; +#ifdef CONFIG_IA32_SUPPORT + case _IA64_REG_AR_EFLAG: + res = xen_get_eflag(); + break; +#endif + case _IA64_REG_CR_IVR: + res = xen_get_ivr(); + break; + case _IA64_REG_CR_TPR: + res = xen_get_tpr(); + break; + default: + res = ia64_native_getreg_func(regnum); + break; + } + return res; +} + +/* turning on interrupts is a bit more complicated.. write to the + * memory-mapped virtual psr.i bit first (to avoid race condition), + * then if any interrupts were pending, we have to execute a hyperprivop + * to ensure the pending interrupt gets delivered; else we're done! */ +static void +xen_ssm_i(void) +{ + int old = xen_get_virtual_psr_i(); + xen_set_virtual_psr_i(1); + barrier(); + if (!old && xen_get_virtual_pend()) + xen_hyper_ssm_i(); +} + +/* turning off interrupts can be paravirtualized simply by writing + * to a memory-mapped virtual psr.i bit (implemented as a 16-bit bool) */ +static void +xen_rsm_i(void) +{ + xen_set_virtual_psr_i(0); + barrier(); +} + +static unsigned long +xen_get_psr_i(void) +{ + return xen_get_virtual_psr_i() ? IA64_PSR_I : 0; +} + +static void +xen_intrin_local_irq_restore(unsigned long mask) +{ + if (mask & IA64_PSR_I) + xen_ssm_i(); + else + xen_rsm_i(); +} + +static const struct pv_cpu_ops xen_cpu_ops __initdata = { + .fc = xen_fc, + .thash = xen_thash, + .get_cpuid = xen_get_cpuid, + .get_pmd = xen_get_pmd, + .getreg = xen_getreg, + .setreg = xen_setreg, + .ptcga = xen_ptcga, + .get_rr = xen_get_rr, + .set_rr = xen_set_rr, + .set_rr0_to_rr4 = xen_set_rr0_to_rr4, + .ssm_i = xen_ssm_i, + .rsm_i = xen_rsm_i, + .get_psr_i = xen_get_psr_i, + .intrin_local_irq_restore + = xen_intrin_local_irq_restore, +}; + +/****************************************************************************** + * replacement of hand written assembly codes. + */ + +extern char xen_switch_to; +extern char xen_leave_syscall; +extern char xen_work_processed_syscall; +extern char xen_leave_kernel; + +const struct pv_cpu_asm_switch xen_cpu_asm_switch = { + .switch_to = (unsigned long)&xen_switch_to, + .leave_syscall = (unsigned long)&xen_leave_syscall, + .work_processed_syscall = (unsigned long)&xen_work_processed_syscall, + .leave_kernel = (unsigned long)&xen_leave_kernel, +}; + +/*************************************************************************** + * pv_iosapic_ops + * iosapic read/write hooks. + */ +static void +xen_pcat_compat_init(void) +{ + /* nothing */ +} + +static struct irq_chip* +xen_iosapic_get_irq_chip(unsigned long trigger) +{ + return NULL; +} + +static unsigned int +xen_iosapic_read(char __iomem *iosapic, unsigned int reg) +{ + struct physdev_apic apic_op; + int ret; + + apic_op.apic_physbase = (unsigned long)iosapic - + __IA64_UNCACHED_OFFSET; + apic_op.reg = reg; + ret = HYPERVISOR_physdev_op(PHYSDEVOP_apic_read, &apic_op); + if (ret) + return ret; + return apic_op.value; +} + +static void +xen_iosapic_write(char __iomem *iosapic, unsigned int reg, u32 val) +{ + struct physdev_apic apic_op; + + apic_op.apic_physbase = (unsigned long)iosapic - + __IA64_UNCACHED_OFFSET; + apic_op.reg = reg; + apic_op.value = val; + HYPERVISOR_physdev_op(PHYSDEVOP_apic_write, &apic_op); +} + +static const struct pv_iosapic_ops xen_iosapic_ops __initdata = { + .pcat_compat_init = xen_pcat_compat_init, + .__get_irq_chip = xen_iosapic_get_irq_chip, + + .__read = xen_iosapic_read, + .__write = xen_iosapic_write, +}; + +/*************************************************************************** + * pv_ops initialization + */ + +void __init +xen_setup_pv_ops(void) +{ + xen_info_init(); + pv_info = xen_info; + pv_init_ops = xen_init_ops; + pv_cpu_ops = xen_cpu_ops; + pv_iosapic_ops = xen_iosapic_ops; + pv_irq_ops = xen_irq_ops; + pv_time_ops = xen_time_ops; + + paravirt_cpu_asm_init(&xen_cpu_asm_switch); +} diff --git a/arch/ia64/xen/xencomm.c b/arch/ia64/xen/xencomm.c new file mode 100644 index 000000000000..1f5d7ac82e97 --- /dev/null +++ b/arch/ia64/xen/xencomm.c @@ -0,0 +1,105 @@ +/* + * Copyright (C) 2006 Hollis Blanchard <hollisb@us.ibm.com>, IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/mm.h> + +static unsigned long kernel_virtual_offset; +static int is_xencomm_initialized; + +/* for xen early printk. It uses console io hypercall which uses xencomm. + * However early printk may use it before xencomm initialization. + */ +int +xencomm_is_initialized(void) +{ + return is_xencomm_initialized; +} + +void +xencomm_initialize(void) +{ + kernel_virtual_offset = KERNEL_START - ia64_tpa(KERNEL_START); + is_xencomm_initialized = 1; +} + +/* Translate virtual address to physical address. */ +unsigned long +xencomm_vtop(unsigned long vaddr) +{ + struct page *page; + struct vm_area_struct *vma; + + if (vaddr == 0) + return 0UL; + + if (REGION_NUMBER(vaddr) == 5) { + pgd_t *pgd; + pud_t *pud; + pmd_t *pmd; + pte_t *ptep; + + /* On ia64, TASK_SIZE refers to current. It is not initialized + during boot. + Furthermore the kernel is relocatable and __pa() doesn't + work on addresses. */ + if (vaddr >= KERNEL_START + && vaddr < (KERNEL_START + KERNEL_TR_PAGE_SIZE)) + return vaddr - kernel_virtual_offset; + + /* In kernel area -- virtually mapped. */ + pgd = pgd_offset_k(vaddr); + if (pgd_none(*pgd) || pgd_bad(*pgd)) + return ~0UL; + + pud = pud_offset(pgd, vaddr); + if (pud_none(*pud) || pud_bad(*pud)) + return ~0UL; + + pmd = pmd_offset(pud, vaddr); + if (pmd_none(*pmd) || pmd_bad(*pmd)) + return ~0UL; + + ptep = pte_offset_kernel(pmd, vaddr); + if (!ptep) + return ~0UL; + + return (pte_val(*ptep) & _PFN_MASK) | (vaddr & ~PAGE_MASK); + } + + if (vaddr > TASK_SIZE) { + /* percpu variables */ + if (REGION_NUMBER(vaddr) == 7 && + REGION_OFFSET(vaddr) >= (1ULL << IA64_MAX_PHYS_BITS)) + ia64_tpa(vaddr); + + /* kernel address */ + return __pa(vaddr); + } + + /* XXX double-check (lack of) locking */ + vma = find_extend_vma(current->mm, vaddr); + if (!vma) + return ~0UL; + + /* We assume the page is modified. */ + page = follow_page(vma, vaddr, FOLL_WRITE | FOLL_TOUCH); + if (!page) + return ~0UL; + + return (page_to_pfn(page) << PAGE_SHIFT) | (vaddr & ~PAGE_MASK); +} diff --git a/arch/ia64/xen/xenivt.S b/arch/ia64/xen/xenivt.S new file mode 100644 index 000000000000..3e71d50584d9 --- /dev/null +++ b/arch/ia64/xen/xenivt.S @@ -0,0 +1,52 @@ +/* + * arch/ia64/xen/ivt.S + * + * Copyright (C) 2005 Hewlett-Packard Co + * Dan Magenheimer <dan.magenheimer@hp.com> + * + * Copyright (c) 2008 Isaku Yamahata <yamahata at valinux co jp> + * VA Linux Systems Japan K.K. + * pv_ops. + */ + +#include <asm/asmmacro.h> +#include <asm/kregs.h> +#include <asm/pgtable.h> + +#include "../kernel/minstate.h" + + .section .text,"ax" +GLOBAL_ENTRY(xen_event_callback) + mov r31=pr // prepare to save predicates + ;; + SAVE_MIN_WITH_COVER // uses r31; defines r2 and r3 + ;; + movl r3=XSI_PSR_IC + mov r14=1 + ;; + st4 [r3]=r14 + ;; + adds r3=8,r2 // set up second base pointer for SAVE_REST + srlz.i // ensure everybody knows psr.ic is back on + ;; + SAVE_REST + ;; +1: + alloc r14=ar.pfs,0,0,1,0 // must be first in an insn group + add out0=16,sp // pass pointer to pt_regs as first arg + ;; + br.call.sptk.many b0=xen_evtchn_do_upcall + ;; + movl r20=XSI_PSR_I_ADDR + ;; + ld8 r20=[r20] + ;; + adds r20=-1,r20 // vcpu_info->evtchn_upcall_pending + ;; + ld1 r20=[r20] + ;; + cmp.ne p6,p0=r20,r0 // if there are pending events, + (p6) br.spnt.few 1b // call evtchn_do_upcall again. + br.sptk.many xen_leave_kernel // we know ia64_leave_kernel is + // paravirtualized as xen_leave_kernel +END(xen_event_callback) diff --git a/arch/ia64/xen/xensetup.S b/arch/ia64/xen/xensetup.S new file mode 100644 index 000000000000..28fed1fcc079 --- /dev/null +++ b/arch/ia64/xen/xensetup.S @@ -0,0 +1,83 @@ +/* + * Support routines for Xen + * + * Copyright (C) 2005 Dan Magenheimer <dan.magenheimer@hp.com> + */ + +#include <asm/processor.h> +#include <asm/asmmacro.h> +#include <asm/pgtable.h> +#include <asm/system.h> +#include <asm/paravirt.h> +#include <asm/xen/privop.h> +#include <linux/elfnote.h> +#include <linux/init.h> +#include <xen/interface/elfnote.h> + + .section .data.read_mostly + .align 8 + .global xen_domain_type +xen_domain_type: + data4 XEN_NATIVE_ASM + .previous + + __INIT +ENTRY(startup_xen) + // Calculate load offset. + // The constant, LOAD_OFFSET, can't be used because the boot + // loader doesn't always load to the LMA specified by the vmlinux.lds. + mov r9=ip // must be the first instruction to make sure + // that r9 = the physical address of startup_xen. + // Usually r9 = startup_xen - LOAD_OFFSET + movl r8=startup_xen + ;; + sub r9=r9,r8 // Usually r9 = -LOAD_OFFSET. + + mov r10=PARAVIRT_HYPERVISOR_TYPE_XEN + movl r11=_start + ;; + add r11=r11,r9 + movl r8=hypervisor_type + ;; + add r8=r8,r9 + mov b0=r11 + ;; + st8 [r8]=r10 + br.cond.sptk.many b0 + ;; +END(startup_xen) + + ELFNOTE(Xen, XEN_ELFNOTE_GUEST_OS, .asciz "linux") + ELFNOTE(Xen, XEN_ELFNOTE_GUEST_VERSION, .asciz "2.6") + ELFNOTE(Xen, XEN_ELFNOTE_XEN_VERSION, .asciz "xen-3.0") + ELFNOTE(Xen, XEN_ELFNOTE_ENTRY, data8.ua startup_xen - LOAD_OFFSET) + +#define isBP p3 // are we the Bootstrap Processor? + + .text + +GLOBAL_ENTRY(xen_setup_hook) + mov r8=XEN_PV_DOMAIN_ASM +(isBP) movl r9=xen_domain_type;; +(isBP) st4 [r9]=r8 + movl r10=xen_ivt;; + + mov cr.iva=r10 + + /* Set xsi base. */ +#define FW_HYPERCALL_SET_SHARED_INFO_VA 0x600 +(isBP) mov r2=FW_HYPERCALL_SET_SHARED_INFO_VA +(isBP) movl r28=XSI_BASE;; +(isBP) break 0x1000;; + + /* setup pv_ops */ +(isBP) mov r4=rp + ;; +(isBP) br.call.sptk.many rp=xen_setup_pv_ops + ;; +(isBP) mov rp=r4 + ;; + + br.ret.sptk.many rp + ;; +END(xen_setup_hook) diff --git a/arch/m32r/oprofile/init.c b/arch/m32r/oprofile/init.c index b7773e45c43f..fa56860f4258 100644 --- a/arch/m32r/oprofile/init.c +++ b/arch/m32r/oprofile/init.c @@ -12,7 +12,7 @@ #include <linux/errno.h> #include <linux/init.h> -int __init oprofile_arch_init(struct oprofile_operations * ops) +int __init oprofile_arch_init(struct oprofile_operations *ops) { return -ENODEV; } diff --git a/arch/mips/oprofile/common.c b/arch/mips/oprofile/common.c index dd2fbd6645c1..3bf3354547f6 100644 --- a/arch/mips/oprofile/common.c +++ b/arch/mips/oprofile/common.c @@ -32,7 +32,7 @@ static int op_mips_setup(void) return 0; } -static int op_mips_create_files(struct super_block * sb, struct dentry * root) +static int op_mips_create_files(struct super_block *sb, struct dentry *root) { int i; diff --git a/arch/mips/oprofile/op_impl.h b/arch/mips/oprofile/op_impl.h index 2bfc17c30106..f04b54fb37d1 100644 --- a/arch/mips/oprofile/op_impl.h +++ b/arch/mips/oprofile/op_impl.h @@ -27,7 +27,7 @@ struct op_counter_config { /* Per-architecture configury and hooks. */ struct op_mips_model { void (*reg_setup) (struct op_counter_config *); - void (*cpu_setup) (void * dummy); + void (*cpu_setup) (void *dummy); int (*init)(void); void (*exit)(void); void (*cpu_start)(void *args); diff --git a/arch/mips/oprofile/op_model_rm9000.c b/arch/mips/oprofile/op_model_rm9000.c index a45d3202894f..3aa81384966d 100644 --- a/arch/mips/oprofile/op_model_rm9000.c +++ b/arch/mips/oprofile/op_model_rm9000.c @@ -80,7 +80,7 @@ static void rm9000_cpu_stop(void *args) write_c0_perfcontrol(0); } -static irqreturn_t rm9000_perfcount_handler(int irq, void * dev_id) +static irqreturn_t rm9000_perfcount_handler(int irq, void *dev_id) { unsigned int control = read_c0_perfcontrol(); struct pt_regs *regs = get_irq_regs(); diff --git a/arch/parisc/oprofile/init.c b/arch/parisc/oprofile/init.c index 113f5139f551..026cba2af07a 100644 --- a/arch/parisc/oprofile/init.c +++ b/arch/parisc/oprofile/init.c @@ -12,7 +12,7 @@ #include <linux/kernel.h> #include <linux/oprofile.h> -int __init oprofile_arch_init(struct oprofile_operations * ops) +int __init oprofile_arch_init(struct oprofile_operations *ops) { return -ENODEV; } diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 9391199d9e77..5b1527883fcb 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -19,9 +19,6 @@ config WORD_SIZE default 64 if PPC64 default 32 if !PPC64 -config PPC_MERGE - def_bool y - config ARCH_PHYS_ADDR_T_64BIT def_bool PPC64 || PHYS_64BIT @@ -326,13 +323,11 @@ config KEXEC config CRASH_DUMP bool "Build a kdump crash kernel" - depends on PPC_MULTIPLATFORM && PPC64 + depends on PPC_MULTIPLATFORM && PPC64 && RELOCATABLE help Build a kernel suitable for use as a kdump capture kernel. - The kernel will be linked at a different address than normal, and - so can only be used for Kdump. - - Don't change this unless you know what you are doing. + The same kernel binary can be used as production kernel and dump + capture kernel. config PHYP_DUMP bool "Hypervisor-assisted dump (EXPERIMENTAL)" @@ -832,11 +827,9 @@ config PAGE_OFFSET default "0xc000000000000000" config KERNEL_START hex - default "0xc000000002000000" if CRASH_DUMP default "0xc000000000000000" config PHYSICAL_START hex - default "0x02000000" if CRASH_DUMP default "0x00000000" endif diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index aac1406ccba5..8fc6d72849ae 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -68,7 +68,8 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c fixed-head.S ep88xc.c ep405.c cuboot-c2k.c \ cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \ cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \ - virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c + virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \ + cuboot-acadia.c src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot)) @@ -211,6 +212,7 @@ image-$(CONFIG_DEFAULT_UIMAGE) += uImage # Board ports in arch/powerpc/platform/40x/Kconfig image-$(CONFIG_EP405) += dtbImage.ep405 image-$(CONFIG_WALNUT) += treeImage.walnut +image-$(CONFIG_ACADIA) += cuImage.acadia # Board ports in arch/powerpc/platform/44x/Kconfig image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony @@ -319,6 +321,9 @@ $(obj)/zImage.iseries: vmlinux $(obj)/uImage: vmlinux $(wrapperbits) $(call if_changed,wrap,uboot) +$(obj)/cuImage.initrd.%: vmlinux $(obj)/%.dtb $(wrapperbits) + $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb,$(obj)/ramdisk.image.gz) + $(obj)/cuImage.%: vmlinux $(obj)/%.dtb $(wrapperbits) $(call if_changed,wrap,cuboot-$*,,$(obj)/$*.dtb) diff --git a/arch/powerpc/boot/addnote.c b/arch/powerpc/boot/addnote.c index dcc9ab2ca823..3091d1d21aef 100644 --- a/arch/powerpc/boot/addnote.c +++ b/arch/powerpc/boot/addnote.c @@ -11,7 +11,7 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. * - * Usage: addnote zImage [note.elf] + * Usage: addnote [-r realbase] zImage [note.elf] * * If note.elf is supplied, it is the name of an ELF file that contains * an RPA note to use instead of the built-in one. Alternatively, the @@ -153,18 +153,31 @@ unsigned char *read_rpanote(const char *fname, int *nnp) int main(int ac, char **av) { - int fd, n, i; + int fd, n, i, ai; int ph, ps, np; int nnote, nnote2, ns; unsigned char *rpap; - - if (ac != 2 && ac != 3) { - fprintf(stderr, "Usage: %s elf-file [rpanote.elf]\n", av[0]); + char *p, *endp; + + ai = 1; + if (ac >= ai + 2 && strcmp(av[ai], "-r") == 0) { + /* process -r realbase */ + p = av[ai + 1]; + descr[1] = strtol(p, &endp, 16); + if (endp == p || *endp != 0) { + fprintf(stderr, "Can't parse -r argument '%s' as hex\n", + p); + exit(1); + } + ai += 2; + } + if (ac != ai + 1 && ac != ai + 2) { + fprintf(stderr, "Usage: %s [-r realbase] elf-file [rpanote.elf]\n", av[0]); exit(1); } - fd = open(av[1], O_RDWR); + fd = open(av[ai], O_RDWR); if (fd < 0) { - perror(av[1]); + perror(av[ai]); exit(1); } @@ -184,12 +197,12 @@ main(int ac, char **av) if (buf[E_IDENT+EI_CLASS] != ELFCLASS32 || buf[E_IDENT+EI_DATA] != ELFDATA2MSB) { fprintf(stderr, "%s is not a big-endian 32-bit ELF image\n", - av[1]); + av[ai]); exit(1); } - if (ac == 3) - rpap = read_rpanote(av[2], &nnote2); + if (ac == ai + 2) + rpap = read_rpanote(av[ai + 1], &nnote2); ph = GET_32BE(buf, E_PHOFF); ps = GET_16BE(buf, E_PHENTSIZE); @@ -202,7 +215,7 @@ main(int ac, char **av) for (i = 0; i < np; ++i) { if (GET_32BE(buf, ph + PH_TYPE) == PT_NOTE) { fprintf(stderr, "%s already has a note entry\n", - av[1]); + av[ai]); exit(0); } ph += ps; @@ -260,18 +273,18 @@ main(int ac, char **av) exit(1); } if (i < n) { - fprintf(stderr, "%s: write truncated\n", av[1]); + fprintf(stderr, "%s: write truncated\n", av[ai]); exit(1); } exit(0); notelf: - fprintf(stderr, "%s does not appear to be an ELF file\n", av[1]); + fprintf(stderr, "%s does not appear to be an ELF file\n", av[ai]); exit(1); nospace: fprintf(stderr, "sorry, I can't find space in %s to put the note\n", - av[1]); + av[ai]); exit(1); } diff --git a/arch/powerpc/boot/cuboot-52xx.c b/arch/powerpc/boot/cuboot-52xx.c index a8611546a656..4c42ec8687be 100644 --- a/arch/powerpc/boot/cuboot-52xx.c +++ b/arch/powerpc/boot/cuboot-52xx.c @@ -37,6 +37,10 @@ static void platform_fixups(void) * this can do a simple path lookup. */ soc = find_node_by_devtype(NULL, "soc"); + if (!soc) + soc = find_node_by_compatible(NULL, "fsl,mpc5200-immr"); + if (!soc) + soc = find_node_by_compatible(NULL, "fsl,mpc5200b-immr"); if (soc) { setprop(soc, "bus-frequency", &bd.bi_ipbfreq, sizeof(bd.bi_ipbfreq)); diff --git a/arch/powerpc/boot/cuboot-acadia.c b/arch/powerpc/boot/cuboot-acadia.c new file mode 100644 index 000000000000..0634aba6348a --- /dev/null +++ b/arch/powerpc/boot/cuboot-acadia.c @@ -0,0 +1,174 @@ +/* + * Old U-boot compatibility for Acadia + * + * Author: Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * Copyright 2008 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "io.h" +#include "dcr.h" +#include "stdio.h" +#include "4xx.h" +#include "44x.h" +#include "cuboot.h" + +#define TARGET_4xx +#include "ppcboot.h" + +static bd_t bd; + +#define CPR_PERD0_SPIDV_MASK 0x000F0000 /* SPI Clock Divider */ + +#define PLLC_SRC_MASK 0x20000000 /* PLL feedback source */ + +#define PLLD_FBDV_MASK 0x1F000000 /* PLL feedback divider value */ +#define PLLD_FWDVA_MASK 0x000F0000 /* PLL forward divider A value */ +#define PLLD_FWDVB_MASK 0x00000700 /* PLL forward divider B value */ + +#define PRIMAD_CPUDV_MASK 0x0F000000 /* CPU Clock Divisor Mask */ +#define PRIMAD_PLBDV_MASK 0x000F0000 /* PLB Clock Divisor Mask */ +#define PRIMAD_OPBDV_MASK 0x00000F00 /* OPB Clock Divisor Mask */ +#define PRIMAD_EBCDV_MASK 0x0000000F /* EBC Clock Divisor Mask */ + +#define PERD0_PWMDV_MASK 0xFF000000 /* PWM Divider Mask */ +#define PERD0_SPIDV_MASK 0x000F0000 /* SPI Divider Mask */ +#define PERD0_U0DV_MASK 0x0000FF00 /* UART 0 Divider Mask */ +#define PERD0_U1DV_MASK 0x000000FF /* UART 1 Divider Mask */ + +static void get_clocks(void) +{ + unsigned long sysclk, cpr_plld, cpr_pllc, cpr_primad, plloutb, i; + unsigned long pllFwdDiv, pllFwdDivB, pllFbkDiv, pllPlbDiv, pllExtBusDiv; + unsigned long pllOpbDiv, freqEBC, freqUART, freqOPB; + unsigned long div; /* total divisor udiv * bdiv */ + unsigned long umin; /* minimum udiv */ + unsigned short diff; /* smallest diff */ + unsigned long udiv; /* best udiv */ + unsigned short idiff; /* current diff */ + unsigned short ibdiv; /* current bdiv */ + unsigned long est; /* current estimate */ + unsigned long baud; + void *np; + + /* read the sysclk value from the CPLD */ + sysclk = (in_8((unsigned char *)0x80000000) == 0xc) ? 66666666 : 33333000; + + /* + * Read PLL Mode registers + */ + cpr_plld = CPR0_READ(DCRN_CPR0_PLLD); + cpr_pllc = CPR0_READ(DCRN_CPR0_PLLC); + + /* + * Determine forward divider A + */ + pllFwdDiv = ((cpr_plld & PLLD_FWDVA_MASK) >> 16); + + /* + * Determine forward divider B + */ + pllFwdDivB = ((cpr_plld & PLLD_FWDVB_MASK) >> 8); + if (pllFwdDivB == 0) + pllFwdDivB = 8; + + /* + * Determine FBK_DIV. + */ + pllFbkDiv = ((cpr_plld & PLLD_FBDV_MASK) >> 24); + if (pllFbkDiv == 0) + pllFbkDiv = 256; + + /* + * Read CPR_PRIMAD register + */ + cpr_primad = CPR0_READ(DCRN_CPR0_PRIMAD); + + /* + * Determine PLB_DIV. + */ + pllPlbDiv = ((cpr_primad & PRIMAD_PLBDV_MASK) >> 16); + if (pllPlbDiv == 0) + pllPlbDiv = 16; + + /* + * Determine EXTBUS_DIV. + */ + pllExtBusDiv = (cpr_primad & PRIMAD_EBCDV_MASK); + if (pllExtBusDiv == 0) + pllExtBusDiv = 16; + + /* + * Determine OPB_DIV. + */ + pllOpbDiv = ((cpr_primad & PRIMAD_OPBDV_MASK) >> 8); + if (pllOpbDiv == 0) + pllOpbDiv = 16; + + /* There is a bug in U-Boot that prevents us from using + * bd.bi_opbfreq because U-Boot doesn't populate it for + * 405EZ. We get to calculate it, yay! + */ + freqOPB = (sysclk *pllFbkDiv) /pllOpbDiv; + + freqEBC = (sysclk * pllFbkDiv) / pllExtBusDiv; + + plloutb = ((sysclk * ((cpr_pllc & PLLC_SRC_MASK) ? + pllFwdDivB : pllFwdDiv) * + pllFbkDiv) / pllFwdDivB); + + np = find_node_by_alias("serial0"); + if (getprop(np, "current-speed", &baud, sizeof(baud)) != sizeof(baud)) + fatal("no current-speed property\n\r"); + + udiv = 256; /* Assume lowest possible serial clk */ + div = plloutb / (16 * baud); /* total divisor */ + umin = (plloutb / freqOPB) << 1; /* 2 x OPB divisor */ + diff = 256; /* highest possible */ + + /* i is the test udiv value -- start with the largest + * possible (256) to minimize serial clock and constrain + * search to umin. + */ + for (i = 256; i > umin; i--) { + ibdiv = div / i; + est = i * ibdiv; + idiff = (est > div) ? (est-div) : (div-est); + if (idiff == 0) { + udiv = i; + break; /* can't do better */ + } else if (idiff < diff) { + udiv = i; /* best so far */ + diff = idiff; /* update lowest diff*/ + } + } + freqUART = plloutb / udiv; + + dt_fixup_cpu_clocks(bd.bi_procfreq, bd.bi_intfreq, bd.bi_plb_busfreq); + dt_fixup_clock("/plb/ebc", freqEBC); + dt_fixup_clock("/plb/opb", freqOPB); + dt_fixup_clock("/plb/opb/serial@ef600300", freqUART); + dt_fixup_clock("/plb/opb/serial@ef600400", freqUART); +} + +static void acadia_fixups(void) +{ + dt_fixup_memory(bd.bi_memstart, bd.bi_memsize); + get_clocks(); + dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + platform_ops.fixups = acadia_fixups; + platform_ops.exit = ibm40x_dbcr_reset; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/dts/acadia.dts b/arch/powerpc/boot/dts/acadia.dts new file mode 100644 index 000000000000..57291f61ffe7 --- /dev/null +++ b/arch/powerpc/boot/dts/acadia.dts @@ -0,0 +1,224 @@ +/* + * Device Tree Source for AMCC Acadia (405EZ) + * + * Copyright IBM Corp. 2008 + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "amcc,acadia"; + compatible = "amcc,acadia"; + dcr-parent = <&{/cpus/cpu@0}>; + + aliases { + ethernet0 = &EMAC0; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,405EZ"; + reg = <0x0>; + clock-frequency = <0>; /* Filled in by wrapper */ + timebase-frequency = <0>; /* Filled in by wrapper */ + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <16384>; + d-cache-size = <16384>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; /* Filled in by wrapper */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic-405ez", "ibm,uic"; + interrupt-controller; + dcr-reg = <0x0c0 0x009>; + cell-index = <0>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + plb { + compatible = "ibm,plb-405ez", "ibm,plb3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by wrapper */ + + MAL0: mcmal { + compatible = "ibm,mcmal-405ez", "ibm,mcmal"; + dcr-reg = <0x380 0x62>; + num-tx-chans = <1>; + num-rx-chans = <1>; + interrupt-parent = <&UIC0>; + /* 405EZ has only 3 interrupts to the UIC, as + * SERR, TXDE, and RXDE are or'd together into + * one UIC bit + */ + interrupts = < + 0x13 0x4 /* TXEOB */ + 0x15 0x4 /* RXEOB */ + 0x12 0x4 /* SERR, TXDE, RXDE */>; + }; + + POB0: opb { + compatible = "ibm,opb-405ez", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + dcr-reg = <0x0a 0x05>; + clock-frequency = <0>; /* Filled in by wrapper */ + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x8>; + virtual-reg = <0xef600300>; + clock-frequency = <0>; /* Filled in by wrapper */ + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <0x5 0x4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600400 0x8>; + clock-frequency = <0>; /* Filled in by wrapper */ + current-speed = <115200>; + interrupt-parent = <&UIC0>; + interrupts = <0x6 0x4>; + }; + + IIC: i2c@ef600500 { + compatible = "ibm,iic-405ez", "ibm,iic"; + reg = <0xef600500 0x11>; + interrupt-parent = <&UIC0>; + interrupts = <0xa 0x4>; + }; + + GPIO0: gpio@ef600700 { + compatible = "ibm,gpio-405ez"; + reg = <0xef600700 0x20>; + }; + + GPIO1: gpio@ef600800 { + compatible = "ibm,gpio-405ez"; + reg = <0xef600800 0x20>; + }; + + EMAC0: ethernet@ef600900 { + device_type = "network"; + compatible = "ibm,emac-405ez", "ibm,emac"; + interrupt-parent = <&UIC0>; + interrupts = < + 0x10 0x4 /* Ethernet */ + 0x11 0x4 /* Ethernet Wake up */>; + local-mac-address = [000000000000]; /* Filled in by wrapper */ + reg = <0xef600900 0x70>; + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <1500>; + rx-fifo-size = <4096>; + tx-fifo-size = <2048>; + phy-mode = "mii"; + phy-map = <0x0>; + }; + + CAN0: can@ef601000 { + compatible = "amcc,can-405ez"; + reg = <0xef601000 0x620>; + interrupt-parent = <&UIC0>; + interrupts = <0x7 0x4>; + }; + + CAN1: can@ef601800 { + compatible = "amcc,can-405ez"; + reg = <0xef601800 0x620>; + interrupt-parent = <&UIC0>; + interrupts = <0x8 0x4>; + }; + + cameleon@ef602000 { + compatible = "amcc,cameleon-405ez"; + reg = <0xef602000 0x800>; + interrupt-parent = <&UIC0>; + interrupts = <0xb 0x4 0xc 0x4>; + }; + + ieee1588@ef602800 { + compatible = "amcc,ieee1588-405ez"; + reg = <0xef602800 0x60>; + interrupt-parent = <&UIC0>; + interrupts = <0x4 0x4>; + /* This thing is a bit weird. It has it's own UIC + * that it uses to generate snapshot triggers. We + * don't really support this device yet, and it needs + * work to figure this out. + */ + dcr-reg = <0xe0 0x9>; + }; + + usb@ef603000 { + compatible = "ohci-be"; + reg = <0xef603000 0x80>; + interrupts-parent = <&UIC0>; + interrupts = <0xd 0x4 0xe 0x4>; + }; + + dac@ef603300 { + compatible = "amcc,dac-405ez"; + reg = <0xef603300 0x40>; + interrupt-parent = <&UIC0>; + interrupts = <0x18 0x4>; + }; + + adc@ef603400 { + compatible = "amcc,adc-405ez"; + reg = <0xef603400 0x40>; + interrupt-parent = <&UIC0>; + interrupts = <0x17 0x4>; + }; + + spi@ef603500 { + compatible = "amcc,spi-405ez"; + reg = <0xef603500 0x100>; + interrupt-parent = <&UIC0>; + interrupts = <0x9 0x4>; + }; + }; + + EBC0: ebc { + compatible = "ibm,ebc-405ez", "ibm,ebc"; + dcr-reg = <0x12 0x2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by wrapper */ + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + }; +}; diff --git a/arch/powerpc/boot/dts/hcu4.dts b/arch/powerpc/boot/dts/hcu4.dts new file mode 100644 index 000000000000..7988598da4c9 --- /dev/null +++ b/arch/powerpc/boot/dts/hcu4.dts @@ -0,0 +1,168 @@ +/* +* Device Tree Source for Netstal Maschinen HCU4 +* based on the IBM Walnut +* +* Copyright 2008 +* Niklaus Giger <niklaus.giger@member.fsf.org> +* +* Copyright 2007 IBM Corp. +* Josh Boyer <jwboyer@linux.vnet.ibm.com> +* +* This file is licensed under the terms of the GNU General Public +* License version 2. This program is licensed "as is" without +* any warranty of any kind, whether express or implied. +*/ + +/dts-v1/; + +/ { + #address-cells = <0x1>; + #size-cells = <0x1>; + model = "netstal,hcu4"; + compatible = "netstal,hcu4"; + dcr-parent = <0x1>; + + aliases { + ethernet0 = "/plb/opb/ethernet@ef600800"; + serial0 = "/plb/opb/serial@ef600300"; + }; + + cpus { + #address-cells = <0x1>; + #size-cells = <0x0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,405GPr"; + reg = <0x0>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0x0>; /* Filled in by U-Boot */ + i-cache-line-size = <0x20>; + d-cache-line-size = <0x20>; + i-cache-size = <0x4000>; + d-cache-size = <0x4000>; + dcr-controller; + dcr-access-method = "native"; + linux,phandle = <0x1>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x0 0x0>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <0x0>; + dcr-reg = <0xc0 0x9>; + #address-cells = <0x0>; + #size-cells = <0x0>; + #interrupt-cells = <0x2>; + linux,phandle = <0x2>; + }; + + plb { + compatible = "ibm,plb3"; + #address-cells = <0x1>; + #size-cells = <0x1>; + ranges; + clock-frequency = <0x0>; /* Filled in by U-Boot */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405gp"; + dcr-reg = <0x10 0x2>; + }; + + MAL: mcmal { + compatible = "ibm,mcmal-405gp", "ibm,mcmal"; + dcr-reg = <0x180 0x62>; + num-tx-chans = <0x1>; + num-rx-chans = <0x1>; + interrupt-parent = <0x2>; + interrupts = <0xb 0x4 0xc 0x4 0xa 0x4 0xd 0x4 0xe 0x4>; + linux,phandle = <0x3>; + }; + + POB0: opb { + compatible = "ibm,opb-405gp", "ibm,opb"; + #address-cells = <0x1>; + #size-cells = <0x1>; + ranges = <0xef600000 0xef600000 0xa00000>; + dcr-reg = <0xa0 0x5>; + clock-frequency = <0x0>; /* Filled in by U-Boot */ + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <0xef600300 0x8>; + virtual-reg = <0xef600300>; + clock-frequency = <0x0>;/* Filled in by U-Boot */ + current-speed = <0>; /* Filled in by U-Boot */ + interrupt-parent = <0x2>; + interrupts = <0x0 0x4>; + }; + + IIC: i2c@ef600500 { + compatible = "ibm,iic-405gp", "ibm,iic"; + reg = <0xef600500 0x11>; + interrupt-parent = <0x2>; + interrupts = <0x2 0x4>; + }; + + GPIO: gpio@ef600700 { + compatible = "ibm,gpio-405gp"; + reg = <0xef600700 0x20>; + }; + + EMAC: ethernet@ef600800 { + device_type = "network"; + compatible = "ibm,emac-405gp", "ibm,emac"; + interrupt-parent = <0x2>; + interrupts = <0xf 0x4 0x9 0x4>; + local-mac-address = [00 00 00 00 00 00]; + reg = <0xef600800 0x70>; + mal-device = <0x3>; + mal-tx-channel = <0x0>; + mal-rx-channel = <0x0>; + cell-index = <0x0>; + max-frame-size = <0x5dc>; + rx-fifo-size = <0x1000>; + tx-fifo-size = <0x800>; + phy-mode = "rmii"; + phy-map = <0x1>; + }; + }; + + EBC0: ebc { + compatible = "ibm,ebc-405gp", "ibm,ebc"; + dcr-reg = <0x12 0x2>; + #address-cells = <0x2>; + #size-cells = <0x1>; + clock-frequency = <0x0>; /* Filled in by U-Boot */ + + sram@0,0 { + reg = <0x0 0x0 0x80000>; + }; + + flash@0,80000 { + compatible = "jedec-flash"; + bank-width = <0x1>; + reg = <0x0 0x80000 0x80000>; + #address-cells = <0x1>; + #size-cells = <0x1>; + + partition@0 { + label = "OpenBIOS"; + reg = <0x0 0x80000>; + read-only; + }; + }; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + }; +}; diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts index 7449e54c1a90..6b850670de1d 100644 --- a/arch/powerpc/boot/dts/mpc8315erdb.dts +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts @@ -121,6 +121,14 @@ compatible = "dallas,ds1339"; reg = <0x68>; }; + + mcu_pio: mcu@a { + #gpio-cells = <2>; + compatible = "fsl,mc9s08qg8-mpc8315erdb", + "fsl,mcu-mpc8349emitx"; + reg = <0x0a>; + gpio-controller; + }; }; spi@7000 { diff --git a/arch/powerpc/boot/dts/mpc832x_mds.dts b/arch/powerpc/boot/dts/mpc832x_mds.dts index e4cc1768f241..57c595bf1071 100644 --- a/arch/powerpc/boot/dts/mpc832x_mds.dts +++ b/arch/powerpc/boot/dts/mpc832x_mds.dts @@ -60,7 +60,7 @@ }; bcsr@f8000000 { - device_type = "board-control"; + compatible = "fsl,mpc8323mds-bcsr"; reg = <0xf8000000 0x8000>; }; diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts index 5cedf373a1d8..2c9d54a35bc3 100644 --- a/arch/powerpc/boot/dts/mpc8349emitx.dts +++ b/arch/powerpc/boot/dts/mpc8349emitx.dts @@ -83,6 +83,14 @@ interrupts = <15 0x8>; interrupt-parent = <&ipic>; dfsrr; + + rtc@68 { + device_type = "rtc"; + compatible = "dallas,ds1339"; + reg = <0x68>; + interrupts = <18 0x8>; + interrupt-parent = <&ipic>; + }; }; spi@7000 { @@ -131,6 +139,14 @@ interrupt-parent = <&ipic>; interrupts = <71 8>; }; + + mcu_pio: mcu@a { + #gpio-cells = <2>; + compatible = "fsl,mc9s08qg8-mpc8349emitx", + "fsl,mcu-mpc8349emitx"; + reg = <0x0a>; + gpio-controller; + }; }; usb@22000 { diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts index 81ae1d3e9440..fa40647ee62e 100644 --- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts +++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts @@ -81,6 +81,14 @@ interrupts = <15 0x8>; interrupt-parent = <&ipic>; dfsrr; + + rtc@68 { + device_type = "rtc"; + compatible = "dallas,ds1339"; + reg = <0x68>; + interrupts = <18 0x8>; + interrupt-parent = <&ipic>; + }; }; spi@7000 { diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts index 04bfde3ea605..c986c541e9bb 100644 --- a/arch/powerpc/boot/dts/mpc834x_mds.dts +++ b/arch/powerpc/boot/dts/mpc834x_mds.dts @@ -49,7 +49,7 @@ }; bcsr@e2400000 { - device_type = "board-control"; + compatible = "fsl,mpc8349mds-bcsr"; reg = <0xe2400000 0x8000>; }; diff --git a/arch/powerpc/boot/dts/mpc836x_mds.dts b/arch/powerpc/boot/dts/mpc836x_mds.dts index 66a12d2631fb..14534d04e4db 100644 --- a/arch/powerpc/boot/dts/mpc836x_mds.dts +++ b/arch/powerpc/boot/dts/mpc836x_mds.dts @@ -69,7 +69,7 @@ }; bcsr@1,0 { - device_type = "board-control"; + compatible = "fsl,mpc8360mds-bcsr"; reg = <1 0 0x8000>; }; }; diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index 53191ba67aaa..435ef3dd022d 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -121,6 +121,14 @@ compatible = "dallas,ds1339"; reg = <0x68>; }; + + mcu_pio: mcu@a { + #gpio-cells = <2>; + compatible = "fsl,mc9s08qg8-mpc8377erdb", + "fsl,mcu-mpc8349emitx"; + reg = <0x0a>; + gpio-controller; + }; }; i2c@3100 { diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index 4a09153d160c..b11e68f56a06 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -121,6 +121,14 @@ compatible = "dallas,ds1339"; reg = <0x68>; }; + + mcu_pio: mcu@a { + #gpio-cells = <2>; + compatible = "fsl,mc9s08qg8-mpc8378erdb", + "fsl,mcu-mpc8349emitx"; + reg = <0x0a>; + gpio-controller; + }; }; i2c@3100 { diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index bbd884ac9dc0..337af6ea26d3 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -121,6 +121,14 @@ compatible = "dallas,ds1339"; reg = <0x68>; }; + + mcu_pio: mcu@a { + #gpio-cells = <2>; + compatible = "fsl,mc9s08qg8-mpc8379erdb", + "fsl,mcu-mpc8349emitx"; + reg = <0x0a>; + gpio-controller; + }; }; i2c@3100 { diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts index 93fdd99901b6..35db1e5440c7 100644 --- a/arch/powerpc/boot/dts/mpc8536ds.dts +++ b/arch/powerpc/boot/dts/mpc8536ds.dts @@ -109,7 +109,7 @@ reg = <0x0 0x80>; cell-index = <0>; interrupt-parent = <&mpic>; - interrupts = <14 0x2>; + interrupts = <20 2>; }; dma-channel@80 { compatible = "fsl,mpc8536-dma-channel", @@ -117,7 +117,7 @@ reg = <0x80 0x80>; cell-index = <1>; interrupt-parent = <&mpic>; - interrupts = <15 0x2>; + interrupts = <21 2>; }; dma-channel@100 { compatible = "fsl,mpc8536-dma-channel", @@ -125,7 +125,7 @@ reg = <0x100 0x80>; cell-index = <2>; interrupt-parent = <&mpic>; - interrupts = <16 0x2>; + interrupts = <22 2>; }; dma-channel@180 { compatible = "fsl,mpc8536-dma-channel", @@ -133,7 +133,7 @@ reg = <0x180 0x80>; cell-index = <3>; interrupt-parent = <&mpic>; - interrupts = <17 0x2>; + interrupts = <23 2>; }; }; @@ -180,7 +180,7 @@ enet0: ethernet@24000 { cell-index = <0>; device_type = "network"; - model = "TSEC"; + model = "eTSEC"; compatible = "gianfar"; reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; @@ -193,7 +193,7 @@ enet1: ethernet@26000 { cell-index = <1>; device_type = "network"; - model = "TSEC"; + model = "eTSEC"; compatible = "gianfar"; reg = <0x26000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts index a15f10343f53..c80158f7741d 100644 --- a/arch/powerpc/boot/dts/mpc8568mds.dts +++ b/arch/powerpc/boot/dts/mpc8568mds.dts @@ -52,7 +52,7 @@ }; bcsr@f8000000 { - device_type = "board-control"; + compatible = "fsl,mpc8568mds-bcsr"; reg = <0xf8000000 0x8000>; }; diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts index e124dd18fb5a..cadd4652a695 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -13,8 +13,8 @@ / { model = "fsl,MPC8572DS"; compatible = "fsl,MPC8572DS"; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; aliases { ethernet0 = &enet0; @@ -61,7 +61,6 @@ memory { device_type = "memory"; - reg = <0x0 0x0>; // Filled by U-Boot }; soc8572@ffe00000 { @@ -69,8 +68,8 @@ #size-cells = <1>; device_type = "soc"; compatible = "simple-bus"; - ranges = <0x0 0xffe00000 0x100000>; - reg = <0xffe00000 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed + ranges = <0x0 0 0xffe00000 0x100000>; + reg = <0 0xffe00000 0 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed bus-frequency = <0>; // Filled out by uboot. memory-controller@2000 { @@ -351,10 +350,10 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xffe08000 0x1000>; + reg = <0 0xffe08000 0 0x1000>; bus-range = <0 255>; - ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>; + ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>; clock-frequency = <33333333>; interrupt-parent = <&mpic>; interrupts = <24 2>; @@ -561,10 +560,10 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xffe09000 0x1000>; + reg = <0 0xffe09000 0 0x1000>; bus-range = <0 255>; - ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>; + ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>; clock-frequency = <33333333>; interrupt-parent = <&mpic>; interrupts = <26 2>; @@ -598,10 +597,10 @@ #interrupt-cells = <1>; #size-cells = <2>; #address-cells = <3>; - reg = <0xffe0a000 0x1000>; + reg = <0 0xffe0a000 0 0x1000>; bus-range = <0 255>; - ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>; + ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000 + 0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>; clock-frequency = <33333333>; interrupt-parent = <&mpic>; interrupts = <27 2>; diff --git a/arch/powerpc/boot/libfdt-wrapper.c b/arch/powerpc/boot/libfdt-wrapper.c index c541fd8a95d4..9276327bc2bb 100644 --- a/arch/powerpc/boot/libfdt-wrapper.c +++ b/arch/powerpc/boot/libfdt-wrapper.c @@ -105,6 +105,11 @@ static int fdt_wrapper_setprop(const void *devp, const char *name, return check_err(rc); } +static int fdt_wrapper_del_node(const void *devp) +{ + return fdt_del_node(fdt, devp_offset(devp)); +} + static void *fdt_wrapper_get_parent(const void *devp) { return offset_devp(fdt_parent_offset(fdt, devp_offset(devp))); @@ -165,6 +170,7 @@ static unsigned long fdt_wrapper_finalize(void) void fdt_init(void *blob) { int err; + int bufsize; dt_ops.finddevice = fdt_wrapper_finddevice; dt_ops.getprop = fdt_wrapper_getprop; @@ -173,21 +179,21 @@ void fdt_init(void *blob) dt_ops.create_node = fdt_wrapper_create_node; dt_ops.find_node_by_prop_value = fdt_wrapper_find_node_by_prop_value; dt_ops.find_node_by_compatible = fdt_wrapper_find_node_by_compatible; + dt_ops.del_node = fdt_wrapper_del_node; dt_ops.get_path = fdt_wrapper_get_path; dt_ops.finalize = fdt_wrapper_finalize; /* Make sure the dt blob is the right version and so forth */ fdt = blob; - err = fdt_open_into(fdt, fdt, fdt_totalsize(blob)); - if (err == -FDT_ERR_NOSPACE) { - int bufsize = fdt_totalsize(fdt) + 4; - buf = malloc(bufsize); - err = fdt_open_into(fdt, buf, bufsize); - } + bufsize = fdt_totalsize(fdt) + 4; + buf = malloc(bufsize); + if(!buf) + fatal("malloc failed. can't relocate the device tree\n\r"); + + err = fdt_open_into(fdt, buf, bufsize); if (err != 0) fatal("fdt_init(): %s\n\r", fdt_strerror(err)); - if (buf) - fdt = buf; + fdt = buf; } diff --git a/arch/powerpc/boot/main.c b/arch/powerpc/boot/main.c index 9e7f3ddd9913..ae32801ebd69 100644 --- a/arch/powerpc/boot/main.c +++ b/arch/powerpc/boot/main.c @@ -56,9 +56,19 @@ static struct addr_range prep_kernel(void) if (platform_ops.vmlinux_alloc) { addr = platform_ops.vmlinux_alloc(ei.memsize); } else { - if ((unsigned long)_start < ei.memsize) + /* + * Check if the kernel image (without bss) would overwrite the + * bootwrapper. The device tree has been moved in fdt_init() + * to an area allocated with malloc() (somewhere past _end). + */ + if ((unsigned long)_start < ei.loadsize) fatal("Insufficient memory for kernel at address 0!" - " (_start=%p)\n\r", _start); + " (_start=%p, uncomressed size=%08x)\n\r", + _start, ei.loadsize); + + if ((unsigned long)_end < ei.memsize) + fatal("The final kernel image would overwrite the " + "device tree\n\r"); } /* Finally, gunzip the kernel */ diff --git a/arch/powerpc/boot/ops.h b/arch/powerpc/boot/ops.h index 321e2f5afe71..b3218ce451bb 100644 --- a/arch/powerpc/boot/ops.h +++ b/arch/powerpc/boot/ops.h @@ -40,6 +40,7 @@ struct dt_ops { const int buflen); int (*setprop)(const void *phandle, const char *name, const void *buf, const int buflen); + int (*del_node)(const void *phandle); void *(*get_parent)(const void *phandle); /* The node must not already exist. */ void *(*create_node)(const void *parent, const char *name); @@ -126,6 +127,11 @@ static inline int setprop_str(void *devp, const char *name, const char *buf) return -1; } +static inline int del_node(const void *devp) +{ + return dt_ops.del_node ? dt_ops.del_node(devp) : -1; +} + static inline void *get_parent(const char *devp) { return dt_ops.get_parent ? dt_ops.get_parent(devp) : NULL; diff --git a/arch/powerpc/boot/string.S b/arch/powerpc/boot/string.S index 643e4cb2f11d..acc9428f2789 100644 --- a/arch/powerpc/boot/string.S +++ b/arch/powerpc/boot/string.S @@ -235,7 +235,7 @@ memchr: .globl memcmp memcmp: cmpwi 0,r5,0 - blelr + ble 2f mtctr r5 addi r6,r3,-1 addi r4,r4,-1 @@ -244,6 +244,8 @@ memcmp: subf. r3,r0,r3 bdnzt 2,1b blr +2: li r3,0 + blr /* diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index ee0dc41d7c56..f39073511a49 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -306,11 +306,14 @@ fi # post-processing needed for some platforms case "$platform" in -pseries|chrp) +pseries) ${CROSS}objcopy -O binary -j .fakeelf "$kernel" "$ofile".rpanote $objbin/addnote "$ofile" "$ofile".rpanote rm -r "$ofile".rpanote ;; +chrp) + $objbin/addnote -r c00000 "$ofile" + ;; coff) ${CROSS}objcopy -O aixcoff-rs6000 --set-start "$entry" "$ofile" $objbin/hack-coff "$ofile" diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig new file mode 100644 index 000000000000..39bd9eb453f0 --- /dev/null +++ b/arch/powerpc/configs/40x/acadia_defconfig @@ -0,0 +1,921 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.27-rc5 +# Mon Oct 13 13:47:16 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +CONFIG_40x=y +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_4xx=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_DCR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +# CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_HAVE_CLK is not set +CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_PPC4xx_PCI_EXPRESS is not set + +# +# Platform support +# +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +CONFIG_ACADIA=y +# CONFIG_EP405 is not set +# CONFIG_KILAUEA is not set +# CONFIG_MAKALU is not set +# CONFIG_WALNUT is not set +# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set +CONFIG_PPC40x_SIMPLE=y +CONFIG_405EZ=y +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_FSL_ULI1575 is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +CONFIG_EXTRA_TARGETS="" +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PPC_PCI_CHOICE=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=35000 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_XILINX_SYSACE is not set +# CONFIG_BLK_DEV_HD is not set +# CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBM_NEW_EMAC=y +CONFIG_IBM_NEW_EMAC_RXB=256 +CONFIG_IBM_NEW_EMAC_TXB=256 +CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32 +CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256 +CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0 +CONFIG_IBM_NEW_EMAC_DEBUG=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL=y +CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT=y +CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +# CONFIG_SPI is not set +CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +# CONFIG_GPIOLIB is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_THERMAL=y +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_CODE_PATCHING_SELFTEST is not set +# CONFIG_FTR_FIXUP_SELFTEST is not set +# CONFIG_MSI_BITMAP_SELFTEST is not set +# CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_VIRQ_DEBUG is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/40x/hcu4_defconfig b/arch/powerpc/configs/40x/hcu4_defconfig new file mode 100644 index 000000000000..682fce02c73a --- /dev/null +++ b/arch/powerpc/configs/40x/hcu4_defconfig @@ -0,0 +1,929 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26.5 +# Tue Sep 16 00:44:33 2008 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +CONFIG_40x=y +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_4xx=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set +CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_DCR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +# CONFIG_LOGBUFFER is not set +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_PPC4xx_PCI_EXPRESS is not set + +# +# Platform support +# +# CONFIG_PPC_MPC512x is not set +# CONFIG_PPC_MPC5121 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_EP405 is not set +CONFIG_HCU4=y +# CONFIG_KILAUEA is not set +# CONFIG_MAKALU is not set +# CONFIG_WALNUT is not set +# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set +# CONFIG_IPIC is not set +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_FSL_ULI1575 is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_IOMMU_HELPER is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SECCOMP=y +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_4xx_SOC=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=35000 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_XILINX_SYSACE is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# + +# +# Enable only one of the two stacks, unless you know what you are doing +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBM_NEW_EMAC=y +CONFIG_IBM_NEW_EMAC_RXB=128 +CONFIG_IBM_NEW_EMAC_TXB=64 +CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32 +CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256 +CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0 +# CONFIG_IBM_NEW_EMAC_DEBUG is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_SFC is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_YAFFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_VIRQ_DEBUG is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set +# CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h index f6c93c716898..a503da9d56f3 100644 --- a/arch/powerpc/include/asm/kdump.h +++ b/arch/powerpc/include/asm/kdump.h @@ -9,6 +9,12 @@ * Reserve to the end of the FWNMI area, see head_64.S */ #define KDUMP_RESERVE_LIMIT 0x10000 /* 64K */ +/* + * Used to differentiate between relocatable kdump kernel and other + * kernels + */ +#define KDUMP_SIGNATURE 0xfeed1234 + #ifdef CONFIG_CRASH_DUMP #define KDUMP_TRAMPOLINE_START 0x0100 @@ -19,17 +25,18 @@ #endif /* CONFIG_CRASH_DUMP */ #ifndef __ASSEMBLY__ -#ifdef CONFIG_CRASH_DUMP +extern unsigned long __kdump_flag; + +#if defined(CONFIG_CRASH_DUMP) && !defined(CONFIG_RELOCATABLE) extern void reserve_kdump_trampoline(void); extern void setup_kdump_trampoline(void); - -#else /* !CONFIG_CRASH_DUMP */ - +#else +/* !CRASH_DUMP || RELOCATABLE */ static inline void reserve_kdump_trampoline(void) { ; } static inline void setup_kdump_trampoline(void) { ; } +#endif -#endif /* CONFIG_CRASH_DUMP */ #endif /* __ASSEMBLY__ */ #endif /* __PPC64_KDUMP_H */ diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h index 5ac51e6efc1d..c0b8d4a29a91 100644 --- a/arch/powerpc/include/asm/page.h +++ b/arch/powerpc/include/asm/page.h @@ -77,6 +77,7 @@ #if defined(CONFIG_RELOCATABLE) #ifndef __ASSEMBLY__ + extern phys_addr_t memstart_addr; extern phys_addr_t kernstart_addr; #endif diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index e70d0483fb4e..b1eb834bc0fc 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -1277,6 +1277,19 @@ static struct cpu_spec __initdata cpu_specs[] = { .machine_check = machine_check_4xx, .platform = "ppc405", }, + { + /* 405EZ */ + .pvr_mask = 0xffff0000, + .pvr_value = 0x41510000, + .cpu_name = "405EZ", + .cpu_features = CPU_FTRS_40X, + .cpu_user_features = PPC_FEATURE_32 | + PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, + .icache_bsize = 32, + .dcache_bsize = 32, + .machine_check = machine_check_4xx, + .platform = "ppc405", + }, { /* default match */ .pvr_mask = 0x00000000, .pvr_value = 0x00000000, diff --git a/arch/powerpc/kernel/crash_dump.c b/arch/powerpc/kernel/crash_dump.c index 97e056379728..19671aca6591 100644 --- a/arch/powerpc/kernel/crash_dump.c +++ b/arch/powerpc/kernel/crash_dump.c @@ -30,6 +30,7 @@ /* Stores the physical address of elf header of crash image. */ unsigned long long elfcorehdr_addr = ELFCORE_ADDR_MAX; +#ifndef CONFIG_RELOCATABLE void __init reserve_kdump_trampoline(void) { lmb_reserve(0, KDUMP_RESERVE_LIMIT); @@ -68,6 +69,7 @@ void __init setup_kdump_trampoline(void) DBG(" <- setup_kdump_trampoline()\n"); } +#endif /* CONFIG_RELOCATABLE */ /* * Note: elfcorehdr_addr is not just limited to vmcore. It is also used by diff --git a/arch/powerpc/kernel/head_64.S b/arch/powerpc/kernel/head_64.S index 84856bee33a5..69489bd3210c 100644 --- a/arch/powerpc/kernel/head_64.S +++ b/arch/powerpc/kernel/head_64.S @@ -97,6 +97,12 @@ __secondary_hold_spinloop: __secondary_hold_acknowledge: .llong 0x0 + /* This flag is set by purgatory if we should be a kdump kernel. */ + /* Do not move this variable as purgatory knows about it. */ + .globl __kdump_flag +__kdump_flag: + .llong 0x0 + #ifdef CONFIG_PPC_ISERIES /* * At offset 0x20, there is a pointer to iSeries LPAR data. @@ -1384,7 +1390,13 @@ _STATIC(__after_prom_start) /* process relocations for the final address of the kernel */ lis r25,PAGE_OFFSET@highest /* compute virtual base of kernel */ sldi r25,r25,32 - mr r3,r25 +#ifdef CONFIG_CRASH_DUMP + ld r7,__kdump_flag-_stext(r26) + cmpldi cr0,r7,1 /* kdump kernel ? - stay where we are */ + bne 1f + add r25,r25,r26 +#endif +1: mr r3,r25 bl .relocate #endif @@ -1398,11 +1410,26 @@ _STATIC(__after_prom_start) li r3,0 /* target addr */ mr. r4,r26 /* In some cases the loader may */ beq 9f /* have already put us at zero */ - lis r5,(copy_to_here - _stext)@ha - addi r5,r5,(copy_to_here - _stext)@l /* # bytes of memory to copy */ li r6,0x100 /* Start offset, the first 0x100 */ /* bytes were copied earlier. */ +#ifdef CONFIG_CRASH_DUMP +/* + * Check if the kernel has to be running as relocatable kernel based on the + * variable __kdump_flag, if it is set the kernel is treated as relocatable + * kernel, otherwise it will be moved to PHYSICAL_START + */ + ld r7,__kdump_flag-_stext(r26) + cmpldi cr0,r7,1 + bne 3f + + li r5,__end_interrupts - _stext /* just copy interrupts */ + b 5f +3: +#endif + lis r5,(copy_to_here - _stext)@ha + addi r5,r5,(copy_to_here - _stext)@l /* # bytes of memory to copy */ + bl .copy_and_flush /* copy the first n bytes */ /* this includes the code being */ /* executed here. */ @@ -1411,15 +1438,15 @@ _STATIC(__after_prom_start) mtctr r8 bctr +p_end: .llong _end - _stext + 4: /* Now copy the rest of the kernel up to _end */ addis r5,r26,(p_end - _stext)@ha ld r5,(p_end - _stext)@l(r5) /* get _end */ - bl .copy_and_flush /* copy the rest */ +5: bl .copy_and_flush /* copy the rest */ 9: b .start_here_multiplatform -p_end: .llong _end - _stext - /* * Copy routine used to copy the kernel to start at physical address 0 * and flush and invalidate the caches as needed. diff --git a/arch/powerpc/kernel/iommu.c b/arch/powerpc/kernel/iommu.c index ea1ba89f9c90..3857d7e2af0c 100644 --- a/arch/powerpc/kernel/iommu.c +++ b/arch/powerpc/kernel/iommu.c @@ -458,6 +458,42 @@ void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist, spin_unlock_irqrestore(&(tbl->it_lock), flags); } +static void iommu_table_clear(struct iommu_table *tbl) +{ + if (!__kdump_flag) { + /* Clear the table in case firmware left allocations in it */ + ppc_md.tce_free(tbl, tbl->it_offset, tbl->it_size); + return; + } + +#ifdef CONFIG_CRASH_DUMP + if (ppc_md.tce_get) { + unsigned long index, tceval, tcecount = 0; + + /* Reserve the existing mappings left by the first kernel. */ + for (index = 0; index < tbl->it_size; index++) { + tceval = ppc_md.tce_get(tbl, index + tbl->it_offset); + /* + * Freed TCE entry contains 0x7fffffffffffffff on JS20 + */ + if (tceval && (tceval != 0x7fffffffffffffffUL)) { + __set_bit(index, tbl->it_map); + tcecount++; + } + } + + if ((tbl->it_size - tcecount) < KDUMP_MIN_TCE_ENTRIES) { + printk(KERN_WARNING "TCE table is full; freeing "); + printk(KERN_WARNING "%d entries for the kdump boot\n", + KDUMP_MIN_TCE_ENTRIES); + for (index = tbl->it_size - KDUMP_MIN_TCE_ENTRIES; + index < tbl->it_size; index++) + __clear_bit(index, tbl->it_map); + } + } +#endif +} + /* * Build a iommu_table structure. This contains a bit map which * is used to manage allocation of the tce space. @@ -484,38 +520,7 @@ struct iommu_table *iommu_init_table(struct iommu_table *tbl, int nid) tbl->it_largehint = tbl->it_halfpoint; spin_lock_init(&tbl->it_lock); -#ifdef CONFIG_CRASH_DUMP - if (ppc_md.tce_get) { - unsigned long index; - unsigned long tceval; - unsigned long tcecount = 0; - - /* - * Reserve the existing mappings left by the first kernel. - */ - for (index = 0; index < tbl->it_size; index++) { - tceval = ppc_md.tce_get(tbl, index + tbl->it_offset); - /* - * Freed TCE entry contains 0x7fffffffffffffff on JS20 - */ - if (tceval && (tceval != 0x7fffffffffffffffUL)) { - __set_bit(index, tbl->it_map); - tcecount++; - } - } - if ((tbl->it_size - tcecount) < KDUMP_MIN_TCE_ENTRIES) { - printk(KERN_WARNING "TCE table is full; "); - printk(KERN_WARNING "freeing %d entries for the kdump boot\n", - KDUMP_MIN_TCE_ENTRIES); - for (index = tbl->it_size - KDUMP_MIN_TCE_ENTRIES; - index < tbl->it_size; index++) - __clear_bit(index, tbl->it_map); - } - } -#else - /* Clear the hardware table in case firmware left allocations in it */ - ppc_md.tce_free(tbl, tbl->it_offset, tbl->it_size); -#endif + iommu_table_clear(tbl); if (!welcomed) { printk(KERN_INFO "IOMMU table initialized, virtual merging %s\n", diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c index aab76887a842..ac2a21f45c75 100644 --- a/arch/powerpc/kernel/machine_kexec.c +++ b/arch/powerpc/kernel/machine_kexec.c @@ -88,11 +88,13 @@ void __init reserve_crashkernel(void) crash_size = crashk_res.end - crashk_res.start + 1; +#ifndef CONFIG_RELOCATABLE if (crashk_res.start != KDUMP_KERNELBASE) printk("Crash kernel location must be 0x%x\n", KDUMP_KERNELBASE); crashk_res.start = KDUMP_KERNELBASE; +#endif crash_size = PAGE_ALIGN(crash_size); crashk_res.end = crashk_res.start + crash_size - 1; diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c index a168514d8609..e6efec788c4d 100644 --- a/arch/powerpc/kernel/machine_kexec_64.c +++ b/arch/powerpc/kernel/machine_kexec_64.c @@ -255,11 +255,14 @@ static union thread_union kexec_stack /* Our assembly helper, in kexec_stub.S */ extern NORET_TYPE void kexec_sequence(void *newstack, unsigned long start, void *image, void *control, - void (*clear_all)(void)) ATTRIB_NORET; + void (*clear_all)(void), + unsigned long kdump_flag) ATTRIB_NORET; /* too late to fail here */ void default_machine_kexec(struct kimage *image) { + unsigned long kdump_flag = 0; + /* prepare control code if any */ /* @@ -270,8 +273,10 @@ void default_machine_kexec(struct kimage *image) * using debugger IPI. */ - if (crashing_cpu == -1) - kexec_prepare_cpus(); + if (crashing_cpu == -1) + kexec_prepare_cpus(); + else + kdump_flag = KDUMP_SIGNATURE; /* switch to a staticly allocated stack. Based on irq stack code. * XXX: the task struct will likely be invalid once we do the copy! @@ -284,7 +289,7 @@ void default_machine_kexec(struct kimage *image) */ kexec_sequence(&kexec_stack, image->start, image, page_address(image->control_code_page), - ppc_md.hpte_clear_all); + ppc_md.hpte_clear_all, kdump_flag); /* NOTREACHED */ } @@ -312,11 +317,24 @@ static struct property kernel_end_prop = { static void __init export_htab_values(void) { struct device_node *node; + struct property *prop; node = of_find_node_by_path("/chosen"); if (!node) return; + /* remove any stale propertys so ours can be found */ + prop = of_find_property(node, kernel_end_prop.name, NULL); + if (prop) + prom_remove_property(node, prop); + prop = of_find_property(node, htab_base_prop.name, NULL); + if (prop) + prom_remove_property(node, prop); + prop = of_find_property(node, htab_size_prop.name, NULL); + if (prop) + prom_remove_property(node, prop); + + /* information needed by userspace when using default_machine_kexec */ kernel_end = __pa(_end); prom_add_property(node, &kernel_end_prop); diff --git a/arch/powerpc/kernel/misc_64.S b/arch/powerpc/kernel/misc_64.S index 3053fe5c62f2..a243fd072a77 100644 --- a/arch/powerpc/kernel/misc_64.S +++ b/arch/powerpc/kernel/misc_64.S @@ -611,10 +611,12 @@ real_mode: /* assume normal blr return */ /* - * kexec_sequence(newstack, start, image, control, clear_all()) + * kexec_sequence(newstack, start, image, control, clear_all(), kdump_flag) * * does the grungy work with stack switching and real mode switches * also does simple calls to other code + * + * kdump_flag says whether the next kernel should be a kdump kernel. */ _GLOBAL(kexec_sequence) @@ -647,7 +649,7 @@ _GLOBAL(kexec_sequence) mr r29,r5 /* image (virt) */ mr r28,r6 /* control, unused */ mr r27,r7 /* clear_all() fn desc */ - mr r26,r8 /* spare */ + mr r26,r8 /* kdump flag */ lhz r25,PACAHWCPUID(r13) /* get our phys cpu from paca */ /* disable interrupts, we are overwriting kernel data next */ @@ -709,5 +711,6 @@ _GLOBAL(kexec_sequence) mr r4,r30 # start, aka phys mem offset mtlr 4 li r5,0 - blr /* image->start(physid, image->start, 0); */ + mr r6,r26 /* kdump_flag */ + blr /* image->start(physid, image->start, 0, kdump_flag); */ #endif /* CONFIG_KEXEC */ diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 3815d84a1ef4..1ec73938a00f 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -610,7 +610,8 @@ int pci_mmap_legacy_page_range(struct pci_bus *bus, pr_debug(" -> mapping phys %llx\n", (unsigned long long)offset); vma->vm_pgoff = offset >> PAGE_SHIFT; - vma->vm_page_prot |= _PAGE_NO_CACHE | _PAGE_GUARDED; + vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot) + | _PAGE_NO_CACHE | _PAGE_GUARDED); return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, vma->vm_end - vma->vm_start, vma->vm_page_prot); diff --git a/arch/powerpc/kernel/prom_init.c b/arch/powerpc/kernel/prom_init.c index 2fdbc18ae94a..23e0db203329 100644 --- a/arch/powerpc/kernel/prom_init.c +++ b/arch/powerpc/kernel/prom_init.c @@ -487,67 +487,6 @@ static int __init prom_setprop(phandle node, const char *nodename, return call_prom("interpret", 1, 1, (u32)(unsigned long) cmd); } -/* We can't use the standard versions because of RELOC headaches. */ -#define isxdigit(c) (('0' <= (c) && (c) <= '9') \ - || ('a' <= (c) && (c) <= 'f') \ - || ('A' <= (c) && (c) <= 'F')) - -#define isdigit(c) ('0' <= (c) && (c) <= '9') -#define islower(c) ('a' <= (c) && (c) <= 'z') -#define toupper(c) (islower(c) ? ((c) - 'a' + 'A') : (c)) - -unsigned long prom_strtoul(const char *cp, const char **endp) -{ - unsigned long result = 0, base = 10, value; - - if (*cp == '0') { - base = 8; - cp++; - if (toupper(*cp) == 'X') { - cp++; - base = 16; - } - } - - while (isxdigit(*cp) && - (value = isdigit(*cp) ? *cp - '0' : toupper(*cp) - 'A' + 10) < base) { - result = result * base + value; - cp++; - } - - if (endp) - *endp = cp; - - return result; -} - -unsigned long prom_memparse(const char *ptr, const char **retptr) -{ - unsigned long ret = prom_strtoul(ptr, retptr); - int shift = 0; - - /* - * We can't use a switch here because GCC *may* generate a - * jump table which won't work, because we're not running at - * the address we're linked at. - */ - if ('G' == **retptr || 'g' == **retptr) - shift = 30; - - if ('M' == **retptr || 'm' == **retptr) - shift = 20; - - if ('K' == **retptr || 'k' == **retptr) - shift = 10; - - if (shift) { - ret <<= shift; - (*retptr)++; - } - - return ret; -} - /* * Early parsing of the command line passed to the kernel, used for * "mem=x" and the options that affect the iommu diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh index 2c7e8e87f770..ea3a2ec03ffa 100644 --- a/arch/powerpc/kernel/prom_init_check.sh +++ b/arch/powerpc/kernel/prom_init_check.sh @@ -20,7 +20,7 @@ WHITELIST="add_reloc_offset __bss_start __bss_stop copy_and_flush _end enter_prom memcpy memset reloc_offset __secondary_hold __secondary_hold_acknowledge __secondary_hold_spinloop __start strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224 -reloc_got2 kernstart_addr" +reloc_got2 kernstart_addr memstart_addr" NM="$1" OBJ="$2" diff --git a/arch/powerpc/kernel/setup-common.c b/arch/powerpc/kernel/setup-common.c index 5ec56ff03e86..705fc4bf3800 100644 --- a/arch/powerpc/kernel/setup-common.c +++ b/arch/powerpc/kernel/setup-common.c @@ -59,6 +59,7 @@ #include <asm/mmu.h> #include <asm/xmon.h> #include <asm/cputhreads.h> +#include <mm/mmu_decl.h> #include "setup.h" @@ -190,6 +191,12 @@ static int show_cpuinfo(struct seq_file *m, void *v) if (ppc_md.show_cpuinfo != NULL) ppc_md.show_cpuinfo(m); +#ifdef CONFIG_PPC32 + /* Display the amount of memory */ + seq_printf(m, "Memory\t\t: %d MB\n", + (unsigned int)(total_memory / (1024 * 1024))); +#endif + return 0; } diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index 65ad925c3a8f..c6a8f2326b6f 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -235,8 +235,6 @@ static long restore_sigcontext(struct pt_regs *regs, sigset_t *set, int sig, else for (i = 0; i < 32 ; i++) current->thread.fpr[i][TS_VSRLOWOFFSET] = 0; - -#else #endif return err; } diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index cb01ebc59387..7b7da8cfd5e8 100644 --- a/arch/powerpc/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c @@ -142,7 +142,7 @@ unsigned int udbg_probe_uart_speed(void __iomem *comport, unsigned int clock) speed = (clock / prescaler) / (divisor * 16); /* sanity check */ - if (speed < 0 || speed > (clock / 16)) + if (speed > (clock / 16)) speed = 9600; return speed; diff --git a/arch/powerpc/mm/hash_utils_64.c b/arch/powerpc/mm/hash_utils_64.c index 5c64af174752..8d5b4758c13a 100644 --- a/arch/powerpc/mm/hash_utils_64.c +++ b/arch/powerpc/mm/hash_utils_64.c @@ -382,8 +382,10 @@ static int __init htab_dt_scan_hugepage_blocks(unsigned long node, printk(KERN_INFO "Huge page(16GB) memory: " "addr = 0x%lX size = 0x%lX pages = %d\n", phys_addr, block_size, expected_pages); - lmb_reserve(phys_addr, block_size * expected_pages); - add_gpage(phys_addr, block_size, expected_pages); + if (phys_addr + (16 * GB) <= lmb_end_of_DRAM()) { + lmb_reserve(phys_addr, block_size * expected_pages); + add_gpage(phys_addr, block_size, expected_pages); + } return 0; } #endif /* CONFIG_HUGETLB_PAGE */ diff --git a/arch/powerpc/mm/numa.c b/arch/powerpc/mm/numa.c index 6cf5c71c431f..eb505ad34a85 100644 --- a/arch/powerpc/mm/numa.c +++ b/arch/powerpc/mm/numa.c @@ -116,6 +116,7 @@ static int __init get_active_region_work_fn(unsigned long start_pfn, /* * get_node_active_region - Return active region containing start_pfn + * Active range returned is empty if none found. * @start_pfn: The page to return the region for. * @node_ar: Returned set to the active region containing start_pfn */ @@ -126,6 +127,7 @@ static void __init get_node_active_region(unsigned long start_pfn, node_ar->nid = nid; node_ar->start_pfn = start_pfn; + node_ar->end_pfn = start_pfn; work_with_active_regions(nid, get_active_region_work_fn, node_ar); } @@ -526,12 +528,10 @@ static unsigned long __init numa_enforce_memory_limit(unsigned long start, /* * We use lmb_end_of_DRAM() in here instead of memory_limit because * we've already adjusted it for the limit and it takes care of - * having memory holes below the limit. + * having memory holes below the limit. Also, in the case of + * iommu_is_off, memory_limit is not set but is implicitly enforced. */ - if (! memory_limit) - return size; - if (start + size <= lmb_end_of_DRAM()) return size; @@ -933,18 +933,20 @@ void __init do_init_bootmem(void) struct node_active_region node_ar; get_node_active_region(start_pfn, &node_ar); - while (start_pfn < end_pfn) { + while (start_pfn < end_pfn && + node_ar.start_pfn < node_ar.end_pfn) { + unsigned long reserve_size = size; /* * if reserved region extends past active region * then trim size to active region */ if (end_pfn > node_ar.end_pfn) - size = (node_ar.end_pfn << PAGE_SHIFT) + reserve_size = (node_ar.end_pfn << PAGE_SHIFT) - (start_pfn << PAGE_SHIFT); - dbg("reserve_bootmem %lx %lx nid=%d\n", physbase, size, - node_ar.nid); + dbg("reserve_bootmem %lx %lx nid=%d\n", physbase, + reserve_size, node_ar.nid); reserve_bootmem_node(NODE_DATA(node_ar.nid), physbase, - size, BOOTMEM_DEFAULT); + reserve_size, BOOTMEM_DEFAULT); /* * if reserved region is contained in the active region * then done. @@ -959,6 +961,7 @@ void __init do_init_bootmem(void) */ start_pfn = node_ar.end_pfn; physbase = start_pfn << PAGE_SHIFT; + size = size - reserve_size; get_node_active_region(start_pfn, &node_ar); } diff --git a/arch/powerpc/oprofile/cell/pr_util.h b/arch/powerpc/oprofile/cell/pr_util.h index 22e4e8d4eb2c..628009c01958 100644 --- a/arch/powerpc/oprofile/cell/pr_util.h +++ b/arch/powerpc/oprofile/cell/pr_util.h @@ -24,6 +24,11 @@ #define SKIP_GENERIC_SYNC 0 #define SYNC_START_ERROR -1 #define DO_GENERIC_SYNC 1 +#define SPUS_PER_NODE 8 +#define DEFAULT_TIMER_EXPIRE (HZ / 10) + +extern struct delayed_work spu_work; +extern int spu_prof_running; struct spu_overlay_info { /* map of sections within an SPU overlay */ unsigned int vma; /* SPU virtual memory address from elf */ @@ -62,6 +67,14 @@ struct vma_to_fileoffset_map { /* map of sections within an SPU program */ }; +struct spu_buffer { + int last_guard_val; + int ctx_sw_seen; + unsigned long *buff; + unsigned int head, tail; +}; + + /* The three functions below are for maintaining and accessing * the vma-to-fileoffset map. */ diff --git a/arch/powerpc/oprofile/cell/spu_profiler.c b/arch/powerpc/oprofile/cell/spu_profiler.c index 380d7e217531..6edaebd5099a 100644 --- a/arch/powerpc/oprofile/cell/spu_profiler.c +++ b/arch/powerpc/oprofile/cell/spu_profiler.c @@ -23,12 +23,11 @@ static u32 *samples; -static int spu_prof_running; +int spu_prof_running; static unsigned int profiling_interval; #define NUM_SPU_BITS_TRBUF 16 #define SPUS_PER_TB_ENTRY 4 -#define SPUS_PER_NODE 8 #define SPU_PC_MASK 0xFFFF @@ -208,6 +207,7 @@ int start_spu_profiling(unsigned int cycles_reset) spu_prof_running = 1; hrtimer_start(&timer, kt, HRTIMER_MODE_REL); + schedule_delayed_work(&spu_work, DEFAULT_TIMER_EXPIRE); return 0; } diff --git a/arch/powerpc/oprofile/cell/spu_task_sync.c b/arch/powerpc/oprofile/cell/spu_task_sync.c index 2a9b4a049329..2949126d28d1 100644 --- a/arch/powerpc/oprofile/cell/spu_task_sync.c +++ b/arch/powerpc/oprofile/cell/spu_task_sync.c @@ -35,7 +35,102 @@ static DEFINE_SPINLOCK(buffer_lock); static DEFINE_SPINLOCK(cache_lock); static int num_spu_nodes; int spu_prof_num_nodes; -int last_guard_val[MAX_NUMNODES * 8]; + +struct spu_buffer spu_buff[MAX_NUMNODES * SPUS_PER_NODE]; +struct delayed_work spu_work; +static unsigned max_spu_buff; + +static void spu_buff_add(unsigned long int value, int spu) +{ + /* spu buff is a circular buffer. Add entries to the + * head. Head is the index to store the next value. + * The buffer is full when there is one available entry + * in the queue, i.e. head and tail can't be equal. + * That way we can tell the difference between the + * buffer being full versus empty. + * + * ASSUPTION: the buffer_lock is held when this function + * is called to lock the buffer, head and tail. + */ + int full = 1; + + if (spu_buff[spu].head >= spu_buff[spu].tail) { + if ((spu_buff[spu].head - spu_buff[spu].tail) + < (max_spu_buff - 1)) + full = 0; + + } else if (spu_buff[spu].tail > spu_buff[spu].head) { + if ((spu_buff[spu].tail - spu_buff[spu].head) + > 1) + full = 0; + } + + if (!full) { + spu_buff[spu].buff[spu_buff[spu].head] = value; + spu_buff[spu].head++; + + if (spu_buff[spu].head >= max_spu_buff) + spu_buff[spu].head = 0; + } else { + /* From the user's perspective make the SPU buffer + * size management/overflow look like we are using + * per cpu buffers. The user uses the same + * per cpu parameter to adjust the SPU buffer size. + * Increment the sample_lost_overflow to inform + * the user the buffer size needs to be increased. + */ + oprofile_cpu_buffer_inc_smpl_lost(); + } +} + +/* This function copies the per SPU buffers to the + * OProfile kernel buffer. + */ +void sync_spu_buff(void) +{ + int spu; + unsigned long flags; + int curr_head; + + for (spu = 0; spu < num_spu_nodes; spu++) { + /* In case there was an issue and the buffer didn't + * get created skip it. + */ + if (spu_buff[spu].buff == NULL) + continue; + + /* Hold the lock to make sure the head/tail + * doesn't change while spu_buff_add() is + * deciding if the buffer is full or not. + * Being a little paranoid. + */ + spin_lock_irqsave(&buffer_lock, flags); + curr_head = spu_buff[spu].head; + spin_unlock_irqrestore(&buffer_lock, flags); + + /* Transfer the current contents to the kernel buffer. + * data can still be added to the head of the buffer. + */ + oprofile_put_buff(spu_buff[spu].buff, + spu_buff[spu].tail, + curr_head, max_spu_buff); + + spin_lock_irqsave(&buffer_lock, flags); + spu_buff[spu].tail = curr_head; + spin_unlock_irqrestore(&buffer_lock, flags); + } + +} + +static void wq_sync_spu_buff(struct work_struct *work) +{ + /* move data from spu buffers to kernel buffer */ + sync_spu_buff(); + + /* only reschedule if profiling is not done */ + if (spu_prof_running) + schedule_delayed_work(&spu_work, DEFAULT_TIMER_EXPIRE); +} /* Container for caching information about an active SPU task. */ struct cached_info { @@ -305,14 +400,21 @@ static int process_context_switch(struct spu *spu, unsigned long objectId) /* Record context info in event buffer */ spin_lock_irqsave(&buffer_lock, flags); - add_event_entry(ESCAPE_CODE); - add_event_entry(SPU_CTX_SWITCH_CODE); - add_event_entry(spu->number); - add_event_entry(spu->pid); - add_event_entry(spu->tgid); - add_event_entry(app_dcookie); - add_event_entry(spu_cookie); - add_event_entry(offset); + spu_buff_add(ESCAPE_CODE, spu->number); + spu_buff_add(SPU_CTX_SWITCH_CODE, spu->number); + spu_buff_add(spu->number, spu->number); + spu_buff_add(spu->pid, spu->number); + spu_buff_add(spu->tgid, spu->number); + spu_buff_add(app_dcookie, spu->number); + spu_buff_add(spu_cookie, spu->number); + spu_buff_add(offset, spu->number); + + /* Set flag to indicate SPU PC data can now be written out. If + * the SPU program counter data is seen before an SPU context + * record is seen, the postprocessing will fail. + */ + spu_buff[spu->number].ctx_sw_seen = 1; + spin_unlock_irqrestore(&buffer_lock, flags); smp_wmb(); /* insure spu event buffer updates are written */ /* don't want entries intermingled... */ @@ -360,6 +462,47 @@ static int number_of_online_nodes(void) return nodes; } +static int oprofile_spu_buff_create(void) +{ + int spu; + + max_spu_buff = oprofile_get_cpu_buffer_size(); + + for (spu = 0; spu < num_spu_nodes; spu++) { + /* create circular buffers to store the data in. + * use locks to manage accessing the buffers + */ + spu_buff[spu].head = 0; + spu_buff[spu].tail = 0; + + /* + * Create a buffer for each SPU. Can't reliably + * create a single buffer for all spus due to not + * enough contiguous kernel memory. + */ + + spu_buff[spu].buff = kzalloc((max_spu_buff + * sizeof(unsigned long)), + GFP_KERNEL); + + if (!spu_buff[spu].buff) { + printk(KERN_ERR "SPU_PROF: " + "%s, line %d: oprofile_spu_buff_create " + "failed to allocate spu buffer %d.\n", + __func__, __LINE__, spu); + + /* release the spu buffers that have been allocated */ + while (spu >= 0) { + kfree(spu_buff[spu].buff); + spu_buff[spu].buff = 0; + spu--; + } + return -ENOMEM; + } + } + return 0; +} + /* The main purpose of this function is to synchronize * OProfile with SPUFS by registering to be notified of * SPU task switches. @@ -372,20 +515,35 @@ static int number_of_online_nodes(void) */ int spu_sync_start(void) { - int k; + int spu; int ret = SKIP_GENERIC_SYNC; int register_ret; unsigned long flags = 0; spu_prof_num_nodes = number_of_online_nodes(); num_spu_nodes = spu_prof_num_nodes * 8; + INIT_DELAYED_WORK(&spu_work, wq_sync_spu_buff); + + /* create buffer for storing the SPU data to put in + * the kernel buffer. + */ + ret = oprofile_spu_buff_create(); + if (ret) + goto out; spin_lock_irqsave(&buffer_lock, flags); - add_event_entry(ESCAPE_CODE); - add_event_entry(SPU_PROFILING_CODE); - add_event_entry(num_spu_nodes); + for (spu = 0; spu < num_spu_nodes; spu++) { + spu_buff_add(ESCAPE_CODE, spu); + spu_buff_add(SPU_PROFILING_CODE, spu); + spu_buff_add(num_spu_nodes, spu); + } spin_unlock_irqrestore(&buffer_lock, flags); + for (spu = 0; spu < num_spu_nodes; spu++) { + spu_buff[spu].ctx_sw_seen = 0; + spu_buff[spu].last_guard_val = 0; + } + /* Register for SPU events */ register_ret = spu_switch_event_register(&spu_active); if (register_ret) { @@ -393,8 +551,6 @@ int spu_sync_start(void) goto out; } - for (k = 0; k < (MAX_NUMNODES * 8); k++) - last_guard_val[k] = 0; pr_debug("spu_sync_start -- running.\n"); out: return ret; @@ -446,13 +602,20 @@ void spu_sync_buffer(int spu_num, unsigned int *samples, * use. We need to discard samples taken during the time * period which an overlay occurs (i.e., guard value changes). */ - if (grd_val && grd_val != last_guard_val[spu_num]) { - last_guard_val[spu_num] = grd_val; + if (grd_val && grd_val != spu_buff[spu_num].last_guard_val) { + spu_buff[spu_num].last_guard_val = grd_val; /* Drop the rest of the samples. */ break; } - add_event_entry(file_offset | spu_num_shifted); + /* We must ensure that the SPU context switch has been written + * out before samples for the SPU. Otherwise, the SPU context + * information is not available and the postprocessing of the + * SPU PC will fail with no available anonymous map information. + */ + if (spu_buff[spu_num].ctx_sw_seen) + spu_buff_add((file_offset | spu_num_shifted), + spu_num); } spin_unlock(&buffer_lock); out: @@ -463,20 +626,41 @@ out: int spu_sync_stop(void) { unsigned long flags = 0; - int ret = spu_switch_event_unregister(&spu_active); - if (ret) { + int ret; + int k; + + ret = spu_switch_event_unregister(&spu_active); + + if (ret) printk(KERN_ERR "SPU_PROF: " - "%s, line %d: spu_switch_event_unregister returned %d\n", - __func__, __LINE__, ret); - goto out; - } + "%s, line %d: spu_switch_event_unregister " \ + "returned %d\n", + __func__, __LINE__, ret); + + /* flush any remaining data in the per SPU buffers */ + sync_spu_buff(); spin_lock_irqsave(&cache_lock, flags); ret = release_cached_info(RELEASE_ALL); spin_unlock_irqrestore(&cache_lock, flags); -out: + + /* remove scheduled work queue item rather then waiting + * for every queued entry to execute. Then flush pending + * system wide buffer to event buffer. + */ + cancel_delayed_work(&spu_work); + + for (k = 0; k < num_spu_nodes; k++) { + spu_buff[k].ctx_sw_seen = 0; + + /* + * spu_sys_buff will be null if there was a problem + * allocating the buffer. Only delete if it exists. + */ + kfree(spu_buff[k].buff); + spu_buff[k].buff = 0; + } pr_debug("spu_sync_stop -- done.\n"); return ret; } - diff --git a/arch/powerpc/oprofile/op_model_cell.c b/arch/powerpc/oprofile/op_model_cell.c index 5ff4de3eb3be..35141a8bc3d9 100644 --- a/arch/powerpc/oprofile/op_model_cell.c +++ b/arch/powerpc/oprofile/op_model_cell.c @@ -404,7 +404,7 @@ set_count_mode(u32 kernel, u32 user) } } -static inline void enable_ctr(u32 cpu, u32 ctr, u32 * pm07_cntrl) +static inline void enable_ctr(u32 cpu, u32 ctr, u32 *pm07_cntrl) { pm07_cntrl[ctr] |= CBE_PM_CTR_ENABLE; diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig index a9260e21451e..65730275e012 100644 --- a/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -14,6 +14,15 @@ # help # This option enables support for the CPCI405 board. +config ACADIA + bool "Acadia" + depends on 40x + default n + select PPC40x_SIMPLE + select 405EZ + help + This option enables support for the AMCC 405EZ Acadia evaluation board. + config EP405 bool "EP405/EP405PC" depends on 40x @@ -23,6 +32,14 @@ config EP405 help This option enables support for the EP405/EP405PC boards. +config HCU4 + bool "Hcu4" + depends on 40x + default y + select 405GPR + help + This option enables support for the Nestal Maschinen HCU4 board. + config KILAUEA bool "Kilauea" depends on 40x @@ -93,6 +110,13 @@ config XILINX_VIRTEX_GENERIC_BOARD Most Virtex designs should use this unless it needs to do some special configuration at board probe time. +config PPC40x_SIMPLE + bool "Simple PowerPC 40x board support" + depends on 40x + default n + help + This option enables the simple PowerPC 40x platform support. + # 40x specific CPU modules, selected based on the board above. config NP405H bool @@ -118,6 +142,12 @@ config 405EX select IBM_NEW_EMAC_EMAC4 select IBM_NEW_EMAC_RGMII +config 405EZ + bool + select IBM_NEW_EMAC_NO_FLOW_CTRL + select IBM_NEW_EMAC_MAL_CLR_ICINTSTAT + select IBM_NEW_EMAC_MAL_COMMON_ERR + config 405GPR bool @@ -139,6 +169,14 @@ config STB03xxx select IBM405_ERR77 select IBM405_ERR51 +config PPC4xx_GPIO + bool "PPC4xx GPIO support" + depends on 40x + select ARCH_REQUIRE_GPIOLIB + select GENERIC_GPIO + help + Enable gpiolib support for ppc40x based boards + # 40x errata/workaround config symbols, selected by the CPU models above # All 405-based cores up until the 405GPR and 405EP have this errata. diff --git a/arch/powerpc/platforms/40x/Makefile b/arch/powerpc/platforms/40x/Makefile index 5533a5c8ce4e..9bab76a652a6 100644 --- a/arch/powerpc/platforms/40x/Makefile +++ b/arch/powerpc/platforms/40x/Makefile @@ -1,5 +1,7 @@ obj-$(CONFIG_KILAUEA) += kilauea.o +obj-$(CONFIG_HCU4) += hcu4.o obj-$(CONFIG_MAKALU) += makalu.o obj-$(CONFIG_WALNUT) += walnut.o obj-$(CONFIG_XILINX_VIRTEX_GENERIC_BOARD) += virtex.o obj-$(CONFIG_EP405) += ep405.o +obj-$(CONFIG_PPC40x_SIMPLE) += ppc40x_simple.o diff --git a/arch/powerpc/platforms/40x/hcu4.c b/arch/powerpc/platforms/40x/hcu4.c new file mode 100644 index 000000000000..60b2afecab75 --- /dev/null +++ b/arch/powerpc/platforms/40x/hcu4.c @@ -0,0 +1,61 @@ +/* + * Architecture- / platform-specific boot-time initialization code for + * IBM PowerPC 4xx based boards. Adapted from original + * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek + * <dan@net4x.com>. + * + * Copyright(c) 1999-2000 Grant Erickson <grant@lcse.umn.edu> + * + * Rewritten and ported to the merged powerpc tree: + * Copyright 2007 IBM Corporation + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * 2002 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include <linux/init.h> +#include <linux/of_platform.h> + +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/time.h> +#include <asm/uic.h> +#include <asm/ppc4xx.h> + +static __initdata struct of_device_id hcu4_of_bus[] = { + { .compatible = "ibm,plb3", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + {}, +}; + +static int __init hcu4_device_probe(void) +{ + of_platform_bus_probe(NULL, hcu4_of_bus, NULL); + return 0; +} +machine_device_initcall(hcu4, hcu4_device_probe); + +static int __init hcu4_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "netstal,hcu4")) + return 0; + + return 1; +} + +define_machine(hcu4) { + .name = "HCU4", + .probe = hcu4_probe, + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .restart = ppc4xx_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/40x/ppc40x_simple.c b/arch/powerpc/platforms/40x/ppc40x_simple.c new file mode 100644 index 000000000000..4498a86b46c3 --- /dev/null +++ b/arch/powerpc/platforms/40x/ppc40x_simple.c @@ -0,0 +1,80 @@ +/* + * Generic PowerPC 40x platform support + * + * Copyright 2008 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; version 2 of the License. + * + * This implements simple platform support for PowerPC 44x chips. This is + * mostly used for eval boards or other simple and "generic" 44x boards. If + * your board has custom functions or hardware, then you will likely want to + * implement your own board.c file to accommodate it. + */ + +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/ppc4xx.h> +#include <asm/prom.h> +#include <asm/time.h> +#include <asm/udbg.h> +#include <asm/uic.h> + +#include <linux/init.h> +#include <linux/of_platform.h> + +static __initdata struct of_device_id ppc40x_of_bus[] = { + { .compatible = "ibm,plb3", }, + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + { .compatible = "simple-bus", }, + {}, +}; + +static int __init ppc40x_device_probe(void) +{ + of_platform_bus_probe(NULL, ppc40x_of_bus, NULL); + + return 0; +} +machine_device_initcall(ppc40x_simple, ppc40x_device_probe); + +/* This is the list of boards that can be supported by this simple + * platform code. This does _not_ mean the boards are compatible, + * as they most certainly are not from a device tree perspective. + * However, their differences are handled by the device tree and the + * drivers and therefore they don't need custom board support files. + * + * Again, if your board needs to do things differently then create a + * board.c file for it rather than adding it to this list. + */ +static char *board[] __initdata = { + "amcc,acadia" +}; + +static int __init ppc40x_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + int i = 0; + + for (i = 0; i < ARRAY_SIZE(board); i++) { + if (of_flat_dt_is_compatible(root, board[i])) { + ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; + return 1; + } + } + + return 0; +} + +define_machine(ppc40x_simple) { + .name = "PowerPC 40x Platform", + .probe = ppc40x_probe, + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .restart = ppc4xx_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 79c1154f88d4..3496bc05058e 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -167,6 +167,14 @@ config PPC44x_SIMPLE help This option enables the simple PowerPC 44x platform support. +config PPC4xx_GPIO + bool "PPC4xx GPIO support" + depends on 44x + select ARCH_REQUIRE_GPIOLIB + select GENERIC_GPIO + help + Enable gpiolib support for ppc440 based boards + # 44x specific CPU modules, selected based on the board above. config 440EP bool diff --git a/arch/powerpc/platforms/52xx/mpc52xx_common.c b/arch/powerpc/platforms/52xx/mpc52xx_common.c index 044b4e6e8743..ae7c34f37e1c 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_common.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_common.c @@ -99,11 +99,14 @@ mpc5200_setup_xlb_arbiter(void) out_be32(&xlb->master_pri_enable, 0xff); out_be32(&xlb->master_priority, 0x11111111); - /* Disable XLB pipelining + /* + * Disable XLB pipelining * (cfr errate 292. We could do this only just before ATA PIO * transaction and re-enable it afterwards ...) + * Not needed on MPC5200B. */ - out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS); + if ((mfspr(SPRN_SVR) & MPC5200_SVR_MASK) == MPC5200_SVR) + out_be32(&xlb->config, in_be32(&xlb->config) | MPC52xx_XLB_CFG_PLDIS); iounmap(xlb); } diff --git a/arch/powerpc/platforms/85xx/ksi8560.c b/arch/powerpc/platforms/85xx/ksi8560.c index 8a3b117b6ce2..81cee7bbf2d2 100644 --- a/arch/powerpc/platforms/85xx/ksi8560.c +++ b/arch/powerpc/platforms/85xx/ksi8560.c @@ -193,7 +193,6 @@ static void __init ksi8560_setup_arch(void) static void ksi8560_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; - uint memsize = total_memory; pvid = mfspr(SPRN_PVR); svid = mfspr(SPRN_SVR); @@ -215,9 +214,6 @@ static void ksi8560_show_cpuinfo(struct seq_file *m) /* Display cpu Pll setting */ phid1 = mfspr(SPRN_HID1); seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } static struct of_device_id __initdata of_bus_ids[] = { diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ads.c b/arch/powerpc/platforms/85xx/mpc85xx_ads.c index 0293e3d3580f..21f009023e26 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_ads.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_ads.c @@ -207,7 +207,6 @@ static void __init mpc85xx_ads_setup_arch(void) static void mpc85xx_ads_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; - uint memsize = total_memory; pvid = mfspr(SPRN_PVR); svid = mfspr(SPRN_SVR); @@ -219,9 +218,6 @@ static void mpc85xx_ads_show_cpuinfo(struct seq_file *m) /* Display cpu Pll setting */ phid1 = mfspr(SPRN_HID1); seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } static struct of_device_id __initdata of_bus_ids[] = { diff --git a/arch/powerpc/platforms/85xx/mpc85xx_cds.c b/arch/powerpc/platforms/85xx/mpc85xx_cds.c index 50d7ea8f922b..aeb6a5bc5522 100644 --- a/arch/powerpc/platforms/85xx/mpc85xx_cds.c +++ b/arch/powerpc/platforms/85xx/mpc85xx_cds.c @@ -307,7 +307,6 @@ static void __init mpc85xx_cds_setup_arch(void) static void mpc85xx_cds_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; - uint memsize = total_memory; pvid = mfspr(SPRN_PVR); svid = mfspr(SPRN_SVR); @@ -320,9 +319,6 @@ static void mpc85xx_cds_show_cpuinfo(struct seq_file *m) /* Display cpu Pll setting */ phid1 = mfspr(SPRN_HID1); seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } diff --git a/arch/powerpc/platforms/85xx/sbc8548.c b/arch/powerpc/platforms/85xx/sbc8548.c index b9246ea0928a..7ec77ce12dad 100644 --- a/arch/powerpc/platforms/85xx/sbc8548.c +++ b/arch/powerpc/platforms/85xx/sbc8548.c @@ -136,7 +136,6 @@ static void __init sbc8548_setup_arch(void) static void sbc8548_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; - uint memsize = total_memory; pvid = mfspr(SPRN_PVR); svid = mfspr(SPRN_SVR); @@ -149,9 +148,6 @@ static void sbc8548_show_cpuinfo(struct seq_file *m) /* Display cpu Pll setting */ phid1 = mfspr(SPRN_HID1); seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } static struct of_device_id __initdata of_bus_ids[] = { diff --git a/arch/powerpc/platforms/85xx/sbc8560.c b/arch/powerpc/platforms/85xx/sbc8560.c index 0c9a856f66b6..472f254a19d2 100644 --- a/arch/powerpc/platforms/85xx/sbc8560.c +++ b/arch/powerpc/platforms/85xx/sbc8560.c @@ -194,7 +194,6 @@ static void __init sbc8560_setup_arch(void) static void sbc8560_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; - uint memsize = total_memory; pvid = mfspr(SPRN_PVR); svid = mfspr(SPRN_SVR); @@ -206,9 +205,6 @@ static void sbc8560_show_cpuinfo(struct seq_file *m) /* Display cpu Pll setting */ phid1 = mfspr(SPRN_HID1); seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } static struct of_device_id __initdata of_bus_ids[] = { diff --git a/arch/powerpc/platforms/85xx/stx_gp3.c b/arch/powerpc/platforms/85xx/stx_gp3.c index 18499d7c9d9e..0cca8f5cb272 100644 --- a/arch/powerpc/platforms/85xx/stx_gp3.c +++ b/arch/powerpc/platforms/85xx/stx_gp3.c @@ -130,7 +130,6 @@ static void __init stx_gp3_setup_arch(void) static void stx_gp3_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; - uint memsize = total_memory; pvid = mfspr(SPRN_PVR); svid = mfspr(SPRN_SVR); @@ -142,9 +141,6 @@ static void stx_gp3_show_cpuinfo(struct seq_file *m) /* Display cpu Pll setting */ phid1 = mfspr(SPRN_HID1); seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } static struct of_device_id __initdata of_bus_ids[] = { diff --git a/arch/powerpc/platforms/85xx/tqm85xx.c b/arch/powerpc/platforms/85xx/tqm85xx.c index d850880d6964..2933a8e827d9 100644 --- a/arch/powerpc/platforms/85xx/tqm85xx.c +++ b/arch/powerpc/platforms/85xx/tqm85xx.c @@ -138,7 +138,6 @@ static void __init tqm85xx_setup_arch(void) static void tqm85xx_show_cpuinfo(struct seq_file *m) { uint pvid, svid, phid1; - uint memsize = total_memory; pvid = mfspr(SPRN_PVR); svid = mfspr(SPRN_SVR); @@ -150,9 +149,6 @@ static void tqm85xx_show_cpuinfo(struct seq_file *m) /* Display cpu Pll setting */ phid1 = mfspr(SPRN_HID1); seq_printf(m, "PLL setting\t: 0x%x\n", ((phid1 >> 24) & 0x3f)); - - /* Display the amount of memory */ - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } static struct of_device_id __initdata of_bus_ids[] = { diff --git a/arch/powerpc/platforms/86xx/gef_sbc610.c b/arch/powerpc/platforms/86xx/gef_sbc610.c index 821c45fac18b..fb371f5ce132 100644 --- a/arch/powerpc/platforms/86xx/gef_sbc610.c +++ b/arch/powerpc/platforms/86xx/gef_sbc610.c @@ -127,7 +127,6 @@ static unsigned int gef_sbc610_get_fpga_rev(void) static void gef_sbc610_show_cpuinfo(struct seq_file *m) { - uint memsize = total_memory; uint svid = mfspr(SPRN_SVR); seq_printf(m, "Vendor\t\t: GE Fanuc Intelligent Platforms\n"); @@ -137,7 +136,6 @@ static void gef_sbc610_show_cpuinfo(struct seq_file *m) seq_printf(m, "FPGA Revision\t: %u\n", gef_sbc610_get_fpga_rev()); seq_printf(m, "SVR\t\t: 0x%x\n", svid); - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } static void __init gef_sbc610_nec_fixup(struct pci_dev *pdev) diff --git a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c index 2672829a71dc..27e0e682d8e1 100644 --- a/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c +++ b/arch/powerpc/platforms/86xx/mpc86xx_hpcn.c @@ -101,13 +101,11 @@ mpc86xx_hpcn_setup_arch(void) static void mpc86xx_hpcn_show_cpuinfo(struct seq_file *m) { - uint memsize = total_memory; uint svid = mfspr(SPRN_SVR); seq_printf(m, "Vendor\t\t: Freescale Semiconductor\n"); seq_printf(m, "SVR\t\t: 0x%x\n", svid); - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } diff --git a/arch/powerpc/platforms/86xx/sbc8641d.c b/arch/powerpc/platforms/86xx/sbc8641d.c index da677a74e2d1..5fd7ed40986f 100644 --- a/arch/powerpc/platforms/86xx/sbc8641d.c +++ b/arch/powerpc/platforms/86xx/sbc8641d.c @@ -63,13 +63,11 @@ sbc8641_setup_arch(void) static void sbc8641_show_cpuinfo(struct seq_file *m) { - uint memsize = total_memory; uint svid = mfspr(SPRN_SVR); seq_printf(m, "Vendor\t\t: Wind River Systems\n"); seq_printf(m, "SVR\t\t: 0x%x\n", svid); - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); } diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c index 2a14b052abcd..665af1c4195b 100644 --- a/arch/powerpc/platforms/cell/ras.c +++ b/arch/powerpc/platforms/cell/ras.c @@ -21,6 +21,7 @@ #include <asm/machdep.h> #include <asm/rtas.h> #include <asm/cell-regs.h> +#include <asm/kdump.h> #include "ras.h" @@ -111,9 +112,8 @@ static int __init cbe_ptcal_enable_on_node(int nid, int order) int ret = -ENOMEM; unsigned long addr; -#ifdef CONFIG_CRASH_DUMP - rtas_call(ptcal_stop_tok, 1, 1, NULL, nid); -#endif + if (__kdump_flag) + rtas_call(ptcal_stop_tok, 1, 1, NULL, nid); area = kmalloc(sizeof(*area), GFP_KERNEL); if (!area) diff --git a/arch/powerpc/platforms/cell/smp.c b/arch/powerpc/platforms/cell/smp.c index efb3964457b1..c0d86e1f56ea 100644 --- a/arch/powerpc/platforms/cell/smp.c +++ b/arch/powerpc/platforms/cell/smp.c @@ -54,8 +54,8 @@ #endif /* - * The primary thread of each non-boot processor is recorded here before - * smp init. + * The Primary thread of each non-boot processor was started from the OF client + * interface by prom_hold_cpus and is spinning on secondary_hold_spinloop. */ static cpumask_t of_spin_map; @@ -208,11 +208,7 @@ void __init smp_init_cell(void) /* Mark threads which are still spinning in hold loops. */ if (cpu_has_feature(CPU_FTR_SMT)) { for_each_present_cpu(i) { - if (i % 2 == 0) - /* - * Even-numbered logical cpus correspond to - * primary threads. - */ + if (cpu_thread_in_core(i) == 0) cpu_set(i, of_spin_map); } } else { diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c index 010a51f59796..b73c369cc6f1 100644 --- a/arch/powerpc/platforms/cell/spufs/file.c +++ b/arch/powerpc/platforms/cell/spufs/file.c @@ -548,6 +548,11 @@ spufs_regs_read(struct file *file, char __user *buffer, int ret; struct spu_context *ctx = file->private_data; + /* pre-check for file position: if we'd return EOF, there's no point + * causing a deschedule */ + if (*pos >= sizeof(ctx->csa.lscsa->gprs)) + return 0; + ret = spu_acquire_saved(ctx); if (ret) return ret; @@ -2426,38 +2431,49 @@ static inline int spufs_switch_log_avail(struct spu_context *ctx) static int spufs_switch_log_open(struct inode *inode, struct file *file) { struct spu_context *ctx = SPUFS_I(inode)->i_ctx; + int rc; + + rc = spu_acquire(ctx); + if (rc) + return rc; - /* - * We (ab-)use the mapping_lock here because it serves the similar - * purpose for synchronizing open/close elsewhere. Maybe it should - * be renamed eventually. - */ - mutex_lock(&ctx->mapping_lock); if (ctx->switch_log) { - spin_lock(&ctx->switch_log->lock); - ctx->switch_log->head = 0; - ctx->switch_log->tail = 0; - spin_unlock(&ctx->switch_log->lock); - } else { - /* - * We allocate the switch log data structures on first open. - * They will never be free because we assume a context will - * be traced until it goes away. - */ - ctx->switch_log = kzalloc(sizeof(struct switch_log) + - SWITCH_LOG_BUFSIZE * sizeof(struct switch_log_entry), - GFP_KERNEL); - if (!ctx->switch_log) - goto out; - spin_lock_init(&ctx->switch_log->lock); - init_waitqueue_head(&ctx->switch_log->wait); + rc = -EBUSY; + goto out; } - mutex_unlock(&ctx->mapping_lock); + + ctx->switch_log = kmalloc(sizeof(struct switch_log) + + SWITCH_LOG_BUFSIZE * sizeof(struct switch_log_entry), + GFP_KERNEL); + + if (!ctx->switch_log) { + rc = -ENOMEM; + goto out; + } + + ctx->switch_log->head = ctx->switch_log->tail = 0; + init_waitqueue_head(&ctx->switch_log->wait); + rc = 0; + +out: + spu_release(ctx); + return rc; +} + +static int spufs_switch_log_release(struct inode *inode, struct file *file) +{ + struct spu_context *ctx = SPUFS_I(inode)->i_ctx; + int rc; + + rc = spu_acquire(ctx); + if (rc) + return rc; + + kfree(ctx->switch_log); + ctx->switch_log = NULL; + spu_release(ctx); return 0; - out: - mutex_unlock(&ctx->mapping_lock); - return -ENOMEM; } static int switch_log_sprint(struct spu_context *ctx, char *tbuf, int n) @@ -2485,42 +2501,54 @@ static ssize_t spufs_switch_log_read(struct file *file, char __user *buf, if (!buf || len < 0) return -EINVAL; + error = spu_acquire(ctx); + if (error) + return error; + while (cnt < len) { char tbuf[128]; int width; - if (file->f_flags & O_NONBLOCK) { - if (spufs_switch_log_used(ctx) <= 0) - return cnt ? cnt : -EAGAIN; - } else { - /* Wait for data in buffer */ - error = wait_event_interruptible(ctx->switch_log->wait, - spufs_switch_log_used(ctx) > 0); - if (error) + if (spufs_switch_log_used(ctx) == 0) { + if (cnt > 0) { + /* If there's data ready to go, we can + * just return straight away */ + break; + + } else if (file->f_flags & O_NONBLOCK) { + error = -EAGAIN; break; - } - spin_lock(&ctx->switch_log->lock); - if (ctx->switch_log->head == ctx->switch_log->tail) { - /* multiple readers race? */ - spin_unlock(&ctx->switch_log->lock); - continue; + } else { + /* spufs_wait will drop the mutex and + * re-acquire, but since we're in read(), the + * file cannot be _released (and so + * ctx->switch_log is stable). + */ + error = spufs_wait(ctx->switch_log->wait, + spufs_switch_log_used(ctx) > 0); + + /* On error, spufs_wait returns without the + * state mutex held */ + if (error) + return error; + + /* We may have had entries read from underneath + * us while we dropped the mutex in spufs_wait, + * so re-check */ + if (spufs_switch_log_used(ctx) == 0) + continue; + } } width = switch_log_sprint(ctx, tbuf, sizeof(tbuf)); - if (width < len) { + if (width < len) ctx->switch_log->tail = (ctx->switch_log->tail + 1) % SWITCH_LOG_BUFSIZE; - } - - spin_unlock(&ctx->switch_log->lock); - - /* - * If the record is greater than space available return - * partial buffer (so far) - */ - if (width >= len) + else + /* If the record is greater than space available return + * partial buffer (so far) */ break; error = copy_to_user(buf + cnt, tbuf, width); @@ -2529,6 +2557,8 @@ static ssize_t spufs_switch_log_read(struct file *file, char __user *buf, cnt += width; } + spu_release(ctx); + return cnt == 0 ? error : cnt; } @@ -2537,29 +2567,41 @@ static unsigned int spufs_switch_log_poll(struct file *file, poll_table *wait) struct inode *inode = file->f_path.dentry->d_inode; struct spu_context *ctx = SPUFS_I(inode)->i_ctx; unsigned int mask = 0; + int rc; poll_wait(file, &ctx->switch_log->wait, wait); + rc = spu_acquire(ctx); + if (rc) + return rc; + if (spufs_switch_log_used(ctx) > 0) mask |= POLLIN; + spu_release(ctx); + return mask; } static const struct file_operations spufs_switch_log_fops = { - .owner = THIS_MODULE, - .open = spufs_switch_log_open, - .read = spufs_switch_log_read, - .poll = spufs_switch_log_poll, + .owner = THIS_MODULE, + .open = spufs_switch_log_open, + .read = spufs_switch_log_read, + .poll = spufs_switch_log_poll, + .release = spufs_switch_log_release, }; +/** + * Log a context switch event to a switch log reader. + * + * Must be called with ctx->state_mutex held. + */ void spu_switch_log_notify(struct spu *spu, struct spu_context *ctx, u32 type, u32 val) { if (!ctx->switch_log) return; - spin_lock(&ctx->switch_log->lock); if (spufs_switch_log_avail(ctx) > 1) { struct switch_log_entry *p; @@ -2573,7 +2615,6 @@ void spu_switch_log_notify(struct spu *spu, struct spu_context *ctx, ctx->switch_log->head = (ctx->switch_log->head + 1) % SWITCH_LOG_BUFSIZE; } - spin_unlock(&ctx->switch_log->lock); wake_up(&ctx->switch_log->wait); } diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index c9bb7cfd3dca..c58bd36b0c5b 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -249,6 +249,7 @@ static int spu_run_fini(struct spu_context *ctx, u32 *npc, spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED); clear_bit(SPU_SCHED_SPU_RUN, &ctx->sched_flags); + spu_switch_log_notify(NULL, ctx, SWITCH_LOG_EXIT, *status); spu_release(ctx); if (signal_pending(current)) @@ -417,8 +418,6 @@ long spufs_run_spu(struct spu_context *ctx, u32 *npc, u32 *event) ret = spu_run_fini(ctx, npc, &status); spu_yield(ctx); - spu_switch_log_notify(NULL, ctx, SWITCH_LOG_EXIT, status); - if ((status & SPU_STATUS_STOPPED_BY_STOP) && (((status >> SPU_STOP_STATUS_SHIFT) & 0x3f00) == 0x2100)) ctx->stats.libassist++; diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 67595bc380dc..2ad914c47493 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -312,6 +312,15 @@ static struct spu *aff_ref_location(struct spu_context *ctx, int mem_aff, */ node = cpu_to_node(raw_smp_processor_id()); for (n = 0; n < MAX_NUMNODES; n++, node++) { + /* + * "available_spus" counts how many spus are not potentially + * going to be used by other affinity gangs whose reference + * context is already in place. Although this code seeks to + * avoid having affinity gangs with a summed amount of + * contexts bigger than the amount of spus in the node, + * this may happen sporadically. In this case, available_spus + * becomes negative, which is harmless. + */ int available_spus; node = (node < MAX_NUMNODES) ? node : 0; @@ -321,12 +330,10 @@ static struct spu *aff_ref_location(struct spu_context *ctx, int mem_aff, available_spus = 0; mutex_lock(&cbe_spu_info[node].list_mutex); list_for_each_entry(spu, &cbe_spu_info[node].spus, cbe_list) { - if (spu->ctx && spu->ctx->gang - && spu->ctx->aff_offset == 0) - available_spus -= - (spu->ctx->gang->contexts - 1); - else - available_spus++; + if (spu->ctx && spu->ctx->gang && !spu->ctx->aff_offset + && spu->ctx->gang->aff_ref_spu) + available_spus -= spu->ctx->gang->contexts; + available_spus++; } if (available_spus < ctx->gang->contexts) { mutex_unlock(&cbe_spu_info[node].list_mutex); @@ -437,6 +444,11 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx) atomic_dec(&cbe_spu_info[spu->node].reserved_spus); if (ctx->gang) + /* + * If ctx->gang->aff_sched_count is positive, SPU affinity is + * being considered in this gang. Using atomic_dec_if_positive + * allow us to skip an explicit check for affinity in this gang + */ atomic_dec_if_positive(&ctx->gang->aff_sched_count); spu_switch_notify(spu, NULL); diff --git a/arch/powerpc/platforms/cell/spufs/spufs.h b/arch/powerpc/platforms/cell/spufs/spufs.h index 8ae8ef9dfc22..15c62d3ca129 100644 --- a/arch/powerpc/platforms/cell/spufs/spufs.h +++ b/arch/powerpc/platforms/cell/spufs/spufs.h @@ -65,7 +65,6 @@ enum { }; struct switch_log { - spinlock_t lock; wait_queue_head_t wait; unsigned long head; unsigned long tail; diff --git a/arch/powerpc/platforms/cell/spufs/sputrace.c b/arch/powerpc/platforms/cell/spufs/sputrace.c index 2ece399f2862..d0b1f3f4d9c8 100644 --- a/arch/powerpc/platforms/cell/spufs/sputrace.c +++ b/arch/powerpc/platforms/cell/spufs/sputrace.c @@ -40,6 +40,7 @@ static DECLARE_WAIT_QUEUE_HEAD(sputrace_wait); static ktime_t sputrace_start; static unsigned long sputrace_head, sputrace_tail; static struct sputrace *sputrace_log; +static int sputrace_logging; static int sputrace_used(void) { @@ -79,6 +80,11 @@ static ssize_t sputrace_read(struct file *file, char __user *buf, char tbuf[128]; int width; + /* If we have data ready to return, don't block waiting + * for more */ + if (cnt > 0 && sputrace_used() == 0) + break; + error = wait_event_interruptible(sputrace_wait, sputrace_used() > 0); if (error) @@ -109,24 +115,49 @@ static ssize_t sputrace_read(struct file *file, char __user *buf, static int sputrace_open(struct inode *inode, struct file *file) { + int rc; + spin_lock(&sputrace_lock); + if (sputrace_logging) { + rc = -EBUSY; + goto out; + } + + sputrace_logging = 1; sputrace_head = sputrace_tail = 0; sputrace_start = ktime_get(); + rc = 0; + +out: spin_unlock(&sputrace_lock); + return rc; +} +static int sputrace_release(struct inode *inode, struct file *file) +{ + spin_lock(&sputrace_lock); + sputrace_logging = 0; + spin_unlock(&sputrace_lock); return 0; } static const struct file_operations sputrace_fops = { - .owner = THIS_MODULE, - .open = sputrace_open, - .read = sputrace_read, + .owner = THIS_MODULE, + .open = sputrace_open, + .read = sputrace_read, + .release = sputrace_release, }; static void sputrace_log_item(const char *name, struct spu_context *ctx, struct spu *spu) { spin_lock(&sputrace_lock); + + if (!sputrace_logging) { + spin_unlock(&sputrace_lock); + return; + } + if (sputrace_avail() > 1) { struct sputrace *t = sputrace_log + sputrace_head; diff --git a/arch/powerpc/platforms/embedded6xx/c2k.c b/arch/powerpc/platforms/embedded6xx/c2k.c index d0b25b8c39d1..32ba0fa0ad03 100644 --- a/arch/powerpc/platforms/embedded6xx/c2k.c +++ b/arch/powerpc/platforms/embedded6xx/c2k.c @@ -116,10 +116,7 @@ static void c2k_restart(char *cmd) void c2k_show_cpuinfo(struct seq_file *m) { - uint memsize = total_memory; - seq_printf(m, "Vendor\t\t: GEFanuc\n"); - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); seq_printf(m, "coherency\t: %s\n", COHERENCY_SETTING); } diff --git a/arch/powerpc/platforms/embedded6xx/prpmc2800.c b/arch/powerpc/platforms/embedded6xx/prpmc2800.c index 5a19b9a1457c..4c485e984236 100644 --- a/arch/powerpc/platforms/embedded6xx/prpmc2800.c +++ b/arch/powerpc/platforms/embedded6xx/prpmc2800.c @@ -119,10 +119,7 @@ static void prpmc2800_restart(char *cmd) void prpmc2800_show_cpuinfo(struct seq_file *m) { - uint memsize = total_memory; - seq_printf(m, "Vendor\t\t: Motorola\n"); - seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024)); seq_printf(m, "coherency\t: %s\n", PPRPM2800_COHERENCY_SETTING); } diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c index 140d02a5232a..a623ad256e9e 100644 --- a/arch/powerpc/platforms/pseries/hotplug-memory.c +++ b/arch/powerpc/platforms/pseries/hotplug-memory.c @@ -22,6 +22,12 @@ static int pseries_remove_lmb(unsigned long base, unsigned int lmb_size) int ret; start_pfn = base >> PAGE_SHIFT; + + if (!pfn_valid(start_pfn)) { + lmb_remove(base, lmb_size); + return 0; + } + zone = page_zone(pfn_to_page(start_pfn)); /* diff --git a/arch/powerpc/platforms/pseries/iommu.c b/arch/powerpc/platforms/pseries/iommu.c index a8c446697f9e..d56491d182d3 100644 --- a/arch/powerpc/platforms/pseries/iommu.c +++ b/arch/powerpc/platforms/pseries/iommu.c @@ -44,6 +44,7 @@ #include <asm/tce.h> #include <asm/ppc-pci.h> #include <asm/udbg.h> +#include <asm/kdump.h> #include "plpar_wrappers.h" @@ -291,9 +292,8 @@ static void iommu_table_setparms(struct pci_controller *phb, tbl->it_base = (unsigned long)__va(*basep); -#ifndef CONFIG_CRASH_DUMP - memset((void *)tbl->it_base, 0, *sizep); -#endif + if (!__kdump_flag) + memset((void *)tbl->it_base, 0, *sizep); tbl->it_busno = phb->bus->number; diff --git a/arch/powerpc/platforms/pseries/smp.c b/arch/powerpc/platforms/pseries/smp.c index e00f96baa381..1a231c389ba0 100644 --- a/arch/powerpc/platforms/pseries/smp.c +++ b/arch/powerpc/platforms/pseries/smp.c @@ -52,8 +52,8 @@ /* - * The primary thread of each non-boot processor is recorded here before - * smp init. + * The Primary thread of each non-boot processor was started from the OF client + * interface by prom_hold_cpus and is spinning on secondary_hold_spinloop. */ static cpumask_t of_spin_map; @@ -161,8 +161,7 @@ static void __devinit smp_pSeries_kick_cpu(int nr) static int smp_pSeries_cpu_bootable(unsigned int nr) { /* Special case - we inhibit secondary thread startup - * during boot if the user requests it. Odd-numbered - * cpus are assumed to be secondary threads. + * during boot if the user requests it. */ if (system_state < SYSTEM_RUNNING && cpu_has_feature(CPU_FTR_SMT) && @@ -199,11 +198,7 @@ static void __init smp_init_pseries(void) /* Mark threads which are still spinning in hold loops. */ if (cpu_has_feature(CPU_FTR_SMT)) { for_each_present_cpu(i) { - if (i % 2 == 0) - /* - * Even-numbered logical cpus correspond to - * primary threads. - */ + if (cpu_thread_in_core(i) == 0) cpu_set(i, of_spin_map); } } else { diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index a44709a94f97..5afce115ab1f 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -37,6 +37,7 @@ obj-$(CONFIG_OF_RTC) += of_rtc.o ifeq ($(CONFIG_PCI),y) obj-$(CONFIG_4xx) += ppc4xx_pci.o endif +obj-$(CONFIG_PPC4xx_GPIO) += ppc4xx_gpio.o obj-$(CONFIG_CPM) += cpm_common.o obj-$(CONFIG_CPM2) += cpm2.o cpm2_pic.o diff --git a/arch/powerpc/sysdev/ppc4xx_gpio.c b/arch/powerpc/sysdev/ppc4xx_gpio.c new file mode 100644 index 000000000000..110efe2a54fc --- /dev/null +++ b/arch/powerpc/sysdev/ppc4xx_gpio.c @@ -0,0 +1,217 @@ +/* + * PPC4xx gpio driver + * + * Copyright (c) 2008 Harris Corporation + * Copyright (c) 2008 Sascha Hauer <s.hauer@pengutronix.de>, Pengutronix + * Copyright (c) MontaVista Software, Inc. 2008. + * + * Author: Steve Falco <sfalco@harris.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_gpio.h> +#include <linux/gpio.h> +#include <linux/types.h> + +#define GPIO_MASK(gpio) (0x80000000 >> (gpio)) +#define GPIO_MASK2(gpio) (0xc0000000 >> ((gpio) * 2)) + +/* Physical GPIO register layout */ +struct ppc4xx_gpio { + __be32 or; + __be32 tcr; + __be32 osrl; + __be32 osrh; + __be32 tsrl; + __be32 tsrh; + __be32 odr; + __be32 ir; + __be32 rr1; + __be32 rr2; + __be32 rr3; + __be32 reserved1; + __be32 isr1l; + __be32 isr1h; + __be32 isr2l; + __be32 isr2h; + __be32 isr3l; + __be32 isr3h; +}; + +struct ppc4xx_gpio_chip { + struct of_mm_gpio_chip mm_gc; + spinlock_t lock; +}; + +/* + * GPIO LIB API implementation for GPIOs + * + * There are a maximum of 32 gpios in each gpio controller. + */ + +static inline struct ppc4xx_gpio_chip * +to_ppc4xx_gpiochip(struct of_mm_gpio_chip *mm_gc) +{ + return container_of(mm_gc, struct ppc4xx_gpio_chip, mm_gc); +} + +static int ppc4xx_gpio_get(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct ppc4xx_gpio __iomem *regs = mm_gc->regs; + + return in_be32(®s->ir) & GPIO_MASK(gpio); +} + +static inline void +__ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct ppc4xx_gpio __iomem *regs = mm_gc->regs; + + if (val) + setbits32(®s->or, GPIO_MASK(gpio)); + else + clrbits32(®s->or, GPIO_MASK(gpio)); +} + +static void +ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct ppc4xx_gpio_chip *chip = to_ppc4xx_gpiochip(mm_gc); + unsigned long flags; + + spin_lock_irqsave(&chip->lock, flags); + + __ppc4xx_gpio_set(gc, gpio, val); + + spin_unlock_irqrestore(&chip->lock, flags); + + pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); +} + +static int ppc4xx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct ppc4xx_gpio_chip *chip = to_ppc4xx_gpiochip(mm_gc); + struct ppc4xx_gpio __iomem *regs = mm_gc->regs; + unsigned long flags; + + spin_lock_irqsave(&chip->lock, flags); + + /* Disable open-drain function */ + clrbits32(®s->odr, GPIO_MASK(gpio)); + + /* Float the pin */ + clrbits32(®s->tcr, GPIO_MASK(gpio)); + + /* Bits 0-15 use TSRL/OSRL, bits 16-31 use TSRH/OSRH */ + if (gpio < 16) { + clrbits32(®s->osrl, GPIO_MASK2(gpio)); + clrbits32(®s->tsrl, GPIO_MASK2(gpio)); + } else { + clrbits32(®s->osrh, GPIO_MASK2(gpio)); + clrbits32(®s->tsrh, GPIO_MASK2(gpio)); + } + + spin_unlock_irqrestore(&chip->lock, flags); + + return 0; +} + +static int +ppc4xx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) +{ + struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); + struct ppc4xx_gpio_chip *chip = to_ppc4xx_gpiochip(mm_gc); + struct ppc4xx_gpio __iomem *regs = mm_gc->regs; + unsigned long flags; + + spin_lock_irqsave(&chip->lock, flags); + + /* First set initial value */ + __ppc4xx_gpio_set(gc, gpio, val); + + /* Disable open-drain function */ + clrbits32(®s->odr, GPIO_MASK(gpio)); + + /* Drive the pin */ + setbits32(®s->tcr, GPIO_MASK(gpio)); + + /* Bits 0-15 use TSRL, bits 16-31 use TSRH */ + if (gpio < 16) { + clrbits32(®s->osrl, GPIO_MASK2(gpio)); + clrbits32(®s->tsrl, GPIO_MASK2(gpio)); + } else { + clrbits32(®s->osrh, GPIO_MASK2(gpio)); + clrbits32(®s->tsrh, GPIO_MASK2(gpio)); + } + + spin_unlock_irqrestore(&chip->lock, flags); + + pr_debug("%s: gpio: %d val: %d\n", __func__, gpio, val); + + return 0; +} + +static int __init ppc4xx_add_gpiochips(void) +{ + struct device_node *np; + + for_each_compatible_node(np, NULL, "ibm,ppc4xx-gpio") { + int ret; + struct ppc4xx_gpio_chip *ppc4xx_gc; + struct of_mm_gpio_chip *mm_gc; + struct of_gpio_chip *of_gc; + struct gpio_chip *gc; + + ppc4xx_gc = kzalloc(sizeof(*ppc4xx_gc), GFP_KERNEL); + if (!ppc4xx_gc) { + ret = -ENOMEM; + goto err; + } + + spin_lock_init(&ppc4xx_gc->lock); + + mm_gc = &ppc4xx_gc->mm_gc; + of_gc = &mm_gc->of_gc; + gc = &of_gc->gc; + + of_gc->gpio_cells = 2; + gc->ngpio = 32; + gc->direction_input = ppc4xx_gpio_dir_in; + gc->direction_output = ppc4xx_gpio_dir_out; + gc->get = ppc4xx_gpio_get; + gc->set = ppc4xx_gpio_set; + + ret = of_mm_gpiochip_add(np, mm_gc); + if (ret) + goto err; + continue; +err: + pr_err("%s: registration failed with status %d\n", + np->full_name, ret); + kfree(ppc4xx_gc); + /* try others anyway */ + } + return 0; +} +arch_initcall(ppc4xx_add_gpiochips); diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c index 7c7874e6ac36..8881a643ac32 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -15,6 +15,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/mtd/physmap.h> +#include <linux/mtd/sh_flctl.h> #include <linux/delay.h> #include <linux/i2c.h> #include <linux/smc911x.h> @@ -108,10 +109,45 @@ static struct platform_device ap325rxa_nor_flash_device = { }, }; +static struct mtd_partition nand_partition_info[] = { + { + .name = "nand_data", + .offset = 0, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct resource nand_flash_resources[] = { + [0] = { + .start = 0xa4530000, + .end = 0xa45300ff, + .flags = IORESOURCE_MEM, + } +}; + +static struct sh_flctl_platform_data nand_flash_data = { + .parts = nand_partition_info, + .nr_parts = ARRAY_SIZE(nand_partition_info), + .flcmncr_val = FCKSEL_E | TYPESEL_SET | NANWF_E, + .has_hwecc = 1, +}; + +static struct platform_device nand_flash_device = { + .name = "sh_flctl", + .resource = nand_flash_resources, + .num_resources = ARRAY_SIZE(nand_flash_resources), + .dev = { + .platform_data = &nand_flash_data, + }, +}; + #define FPGA_LCDREG 0xB4100180 #define FPGA_BKLREG 0xB4100212 #define FPGA_LCDREG_VAL 0x0018 #define PORT_MSELCRB 0xA4050182 +#define PORT_HIZCRC 0xA405015C +#define PORT_DRVCRA 0xA405018A +#define PORT_DRVCRB 0xA405018C static void ap320_wvga_power_on(void *board_data) { @@ -282,6 +318,7 @@ static struct platform_device *ap325rxa_devices[] __initdata = { #ifdef CONFIG_I2C &camera_device, #endif + &nand_flash_device, }; static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { @@ -364,21 +401,36 @@ static int __init ap325rxa_devices_setup(void) ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB); + /* FLCTL */ + gpio_request(GPIO_FN_FCE, NULL); + gpio_request(GPIO_FN_NAF7, NULL); + gpio_request(GPIO_FN_NAF6, NULL); + gpio_request(GPIO_FN_NAF5, NULL); + gpio_request(GPIO_FN_NAF4, NULL); + gpio_request(GPIO_FN_NAF3, NULL); + gpio_request(GPIO_FN_NAF2, NULL); + gpio_request(GPIO_FN_NAF1, NULL); + gpio_request(GPIO_FN_NAF0, NULL); + gpio_request(GPIO_FN_FCDE, NULL); + gpio_request(GPIO_FN_FOE, NULL); + gpio_request(GPIO_FN_FSC, NULL); + gpio_request(GPIO_FN_FWE, NULL); + gpio_request(GPIO_FN_FRB, NULL); + + ctrl_outw(0, PORT_HIZCRC); + ctrl_outw(0xFFFF, PORT_DRVCRA); + ctrl_outw(0xFFFF, PORT_DRVCRB); + platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20); i2c_register_board_info(0, ap325rxa_i2c_devices, ARRAY_SIZE(ap325rxa_i2c_devices)); - + return platform_add_devices(ap325rxa_devices, ARRAY_SIZE(ap325rxa_devices)); } device_initcall(ap325rxa_devices_setup); -static void __init ap325rxa_setup(char **cmdline_p) -{ -} - static struct sh_machine_vector mv_ap325rxa __initmv = { .mv_name = "AP-325RXA", - .mv_setup = ap325rxa_setup, }; diff --git a/arch/sh/boards/board-rsk7203.c b/arch/sh/boards/board-rsk7203.c index ded799cf3eae..58266f06134a 100644 --- a/arch/sh/boards/board-rsk7203.c +++ b/arch/sh/boards/board-rsk7203.c @@ -17,9 +17,10 @@ #include <linux/mtd/map.h> #include <linux/smc911x.h> #include <linux/gpio.h> +#include <linux/leds.h> #include <asm/machvec.h> #include <asm/io.h> -#include <asm/sh7203.h> +#include <cpu/sh7203.h> static struct smc911x_platdata smc911x_info = { .flags = SMC911X_USE_16BIT, @@ -116,10 +117,46 @@ static void __init set_mtd_partitions(void) } } +static struct gpio_led rsk7203_gpio_leds[] = { + { + .name = "green", + .gpio = GPIO_PE10, + .active_low = 1, + }, { + .name = "orange", + .default_trigger = "nand-disk", + .gpio = GPIO_PE12, + .active_low = 1, + }, { + .name = "red:timer", + .default_trigger = "timer", + .gpio = GPIO_PC14, + .active_low = 1, + }, { + .name = "red:heartbeat", + .default_trigger = "heartbeat", + .gpio = GPIO_PE11, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data rsk7203_gpio_leds_info = { + .leds = rsk7203_gpio_leds, + .num_leds = ARRAY_SIZE(rsk7203_gpio_leds), +}; + +static struct platform_device led_device = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &rsk7203_gpio_leds_info, + }, +}; static struct platform_device *rsk7203_devices[] __initdata = { &smc911x_device, &flash_device, + &led_device, }; static int __init rsk7203_devices_setup(void) @@ -128,11 +165,6 @@ static int __init rsk7203_devices_setup(void) gpio_request(GPIO_FN_TXD0, NULL); gpio_request(GPIO_FN_RXD0, NULL); - /* Lit LED0 */ - gpio_request(GPIO_PE10, NULL); - gpio_direction_output(GPIO_PE10, 0); - gpio_export(GPIO_PE10, 0); - set_mtd_partitions(); return platform_add_devices(rsk7203_devices, ARRAY_SIZE(rsk7203_devices)); diff --git a/arch/sh/boards/mach-highlander/Kconfig b/arch/sh/boards/mach-highlander/Kconfig index fc8f28e04ba3..08057f62687b 100644 --- a/arch/sh/boards/mach-highlander/Kconfig +++ b/arch/sh/boards/mach-highlander/Kconfig @@ -18,6 +18,7 @@ config SH_R7780MP config SH_R7785RP bool "R7785RP board support" depends on CPU_SUBTYPE_SH7785 + select GENERIC_GPIO endchoice diff --git a/arch/sh/boards/mach-highlander/Makefile b/arch/sh/boards/mach-highlander/Makefile index 20a10080b11f..d93aaf880134 100644 --- a/arch/sh/boards/mach-highlander/Makefile +++ b/arch/sh/boards/mach-highlander/Makefile @@ -1,10 +1,10 @@ # -# Makefile for the R7780RP-1 specific parts of the kernel +# Makefile for the Highlander specific parts of the kernel # -irqinit-$(CONFIG_SH_R7780MP) := irq-r7780mp.o -irqinit-$(CONFIG_SH_R7785RP) := irq-r7785rp.o -irqinit-$(CONFIG_SH_R7780RP) := irq-r7780rp.o -obj-y := setup.o $(irqinit-y) +obj-y := setup.o +obj-$(CONFIG_SH_R7780RP) += irq-r7780rp.o +obj-$(CONFIG_SH_R7780MP) += irq-r7780mp.o +obj-$(CONFIG_SH_R7785RP) += irq-r7785rp.o pinmux-r7785rp.o ifneq ($(CONFIG_SH_R7785RP),y) obj-$(CONFIG_PUSH_SWITCH) += psw.o diff --git a/arch/sh/boards/mach-highlander/pinmux-r7785rp.c b/arch/sh/boards/mach-highlander/pinmux-r7785rp.c new file mode 100644 index 000000000000..c77a2bea8f2a --- /dev/null +++ b/arch/sh/boards/mach-highlander/pinmux-r7785rp.c @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2008 Paul Mundt + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ +#include <linux/init.h> +#include <linux/gpio.h> +#include <cpu/sh7785.h> + +void __init highlander_plat_pinmux_setup(void) +{ + /* SCIF0 */ + gpio_request(GPIO_FN_SCIF0_CTS, NULL); + gpio_request(GPIO_FN_SCIF0_RTS, NULL); + gpio_request(GPIO_FN_SCIF0_SCK, NULL); + gpio_request(GPIO_FN_SCIF0_RXD, NULL); + gpio_request(GPIO_FN_SCIF0_TXD, NULL); +} diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c index c5a40f7906d7..806438b42cac 100644 --- a/arch/sh/boards/mach-highlander/setup.c +++ b/arch/sh/boards/mach-highlander/setup.c @@ -294,6 +294,8 @@ static void __init highlander_setup(char **cmdline_p) (ver >> 12) & 0xf, (ver >> 8) & 0xf, (ver >> 4) & 0xf, ver & 0xf); + highlander_plat_pinmux_setup(); + /* * Enable the important clocks right away.. */ diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index 769d63043424..975281980299 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -288,8 +288,11 @@ static struct clk *camera_clk; static void camera_power_on(void) { + /* Use 10 MHz VIO_CKO instead of 24 MHz to work + * around signal quality issues on Panel Board V2.1. + */ camera_clk = clk_get(NULL, "video_clk"); - clk_set_rate(camera_clk, 24000000); + clk_set_rate(camera_clk, 10000000); clk_enable(camera_clk); /* start VIO_CKO */ /* use VIO_RST to take camera out of reset */ @@ -307,10 +310,18 @@ static void camera_power_off(void) gpio_set_value(GPIO_PTT3, 0); } +static void camera_power(int mode) +{ + if (mode) + camera_power_on(); + else + camera_power_off(); +} + #ifdef CONFIG_I2C static unsigned char camera_ov772x_magic[] = { - 0x09, 0x01, 0x0c, 0x10, 0x0d, 0x41, 0x0e, 0x01, + 0x09, 0x01, 0x0c, 0x20, 0x0d, 0x41, 0x0e, 0x01, 0x12, 0x00, 0x13, 0x8F, 0x14, 0x4A, 0x15, 0x00, 0x16, 0x00, 0x17, 0x23, 0x18, 0xa0, 0x19, 0x07, 0x1a, 0xf0, 0x1b, 0x40, 0x1f, 0x00, 0x20, 0x10, @@ -386,6 +397,7 @@ static struct soc_camera_platform_info ov772x_info = { }, .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, + .power = camera_power, .set_capture = ov772x_set_capture, }; @@ -400,8 +412,6 @@ static struct platform_device migor_camera_device = { static struct sh_mobile_ceu_info sh_mobile_ceu_info = { .flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \ | SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH, - .enable_camera = camera_power_on, - .disable_camera = camera_power_off, }; static struct resource migor_ceu_resources[] = { diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig index 851c870adf3b..874dd9726e52 100644 --- a/arch/sh/configs/ap325rxa_defconfig +++ b/arch/sh/configs/ap325rxa_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Tue Aug 26 14:21:17 2008 +# Linux kernel version: 2.6.27 +# Tue Oct 21 18:20:06 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -13,11 +13,12 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y @@ -72,22 +73,20 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -120,6 +119,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type @@ -190,12 +190,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration @@ -289,6 +290,8 @@ CONFIG_CMDLINE="console=tty1 console=ttySC5,38400 root=/dev/nfs ip=dhcp" # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_NET=y @@ -339,6 +342,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -359,11 +363,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -455,7 +458,15 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +# CONFIG_MTD_NAND_PLATFORM is not set +CONFIG_MTD_NAND_SH_FLCTL=y # CONFIG_MTD_ONENAND is not set # @@ -541,6 +552,9 @@ CONFIG_SMC911X=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -645,6 +659,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -692,6 +707,8 @@ CONFIG_UIO=y # CONFIG_UIO_PDRV is not set CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_UIO_SMX is not set +# CONFIG_UIO_SERCOS3 is not set +# CONFIG_STAGING is not set # # File systems @@ -705,12 +722,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -743,6 +761,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -785,6 +804,7 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -855,7 +875,12 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -866,14 +891,19 @@ CONFIG_SYSCTL_SYSCALL_CHECK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -946,13 +976,17 @@ CONFIG_CRYPTO_CBC=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y diff --git a/arch/sh/configs/cayman_defconfig b/arch/sh/configs/cayman_defconfig index a05b278d72f5..e21c0e8e22d9 100644 --- a/arch/sh/configs/cayman_defconfig +++ b/arch/sh/configs/cayman_defconfig @@ -1,22 +1,25 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc3 -# Fri Nov 23 14:15:55 2007 +# Linux kernel version: 2.6.27 +# Wed Oct 22 18:04:52 2008 # CONFIG_SUPERH=y # CONFIG_SUPERH32 is not set CONFIG_SUPERH64=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/cayman_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set # CONFIG_GENERIC_TIME is not set # CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y @@ -36,17 +39,15 @@ CONFIG_SWAP=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -60,21 +61,33 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -85,6 +98,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -98,13 +112,18 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type # CONFIG_CPU_SH5=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -113,6 +132,7 @@ CONFIG_CPU_SH5=y # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set # CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -121,12 +141,15 @@ CONFIG_CPU_SH5=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set CONFIG_CPU_SUBTYPE_SH5_101=y # CONFIG_CPU_SUBTYPE_SH5_103 is not set @@ -147,7 +170,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set @@ -161,11 +186,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration @@ -196,7 +223,6 @@ CONFIG_SH_CAYMAN=y # CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=50000000 -# CONFIG_TICK_ONESHOT is not set # # CPU Frequency scaling @@ -225,13 +251,12 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set +# CONFIG_SCHED_HRTICK is not set +# CONFIG_SECCOMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y -CONFIG_GUSA=y +# CONFIG_PREEMPT_RCU is not set # # Boot options @@ -257,11 +282,9 @@ CONFIG_PCI_LEGACY=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -274,6 +297,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -303,8 +327,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -312,6 +334,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -328,14 +351,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -371,14 +394,18 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -438,6 +465,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -449,6 +477,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -456,18 +485,20 @@ CONFIG_SCSI_LOWLEVEL=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_IP1000 is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -486,13 +517,19 @@ CONFIG_NET_ETHERNET=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -500,15 +537,17 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -517,6 +556,9 @@ CONFIG_NETDEV_10000=y # CONFIG_NIU is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -524,13 +566,13 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -575,10 +617,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -603,16 +648,14 @@ CONFIG_DEVPORT=y CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y # -# I2C Algorithms +# I2C Hardware Bus support # -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # -# I2C Hardware Bus support +# PC SMBus host controller drivers # # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set @@ -620,31 +663,47 @@ CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SH_MOBILE is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set # +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set @@ -653,16 +712,12 @@ CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -671,6 +726,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set # CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -700,6 +756,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set # CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set @@ -709,9 +766,12 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set # CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -719,6 +779,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ALIM7101_WDT is not set # # PCI-based Watchdog Cards @@ -735,35 +796,71 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set # # Multimedia devices # + +# +# Multimedia core support +# CONFIG_VIDEO_DEV=m -# CONFIG_VIDEO_V4L1 is not set -# CONFIG_VIDEO_V4L1_COMPAT is not set -CONFIG_VIDEO_V4L2=y +CONFIG_VIDEO_V4L2_COMMON=m +CONFIG_VIDEO_ALLOW_V4L1=y +CONFIG_VIDEO_V4L1_COMPAT=y +CONFIG_DVB_CORE=y +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L1=m CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_BT848 is not set +# CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_SAA5246A is not set # CONFIG_VIDEO_SAA5249 is not set # CONFIG_VIDEO_SAA7134 is not set +# CONFIG_VIDEO_MXB is not set # CONFIG_VIDEO_HEXIUM_ORION is not set # CONFIG_VIDEO_HEXIUM_GEMINI is not set # CONFIG_VIDEO_CX88 is not set # CONFIG_VIDEO_CX23885 is not set +# CONFIG_VIDEO_IVTV is not set +# CONFIG_VIDEO_CX18 is not set # CONFIG_VIDEO_CAFE_CCIC is not set +# CONFIG_SOC_CAMERA is not set # CONFIG_RADIO_ADAPTERS is not set -CONFIG_DVB_CORE=y -# CONFIG_DVB_CORE_ATTACH is not set CONFIG_DVB_CAPTURE_DRIVERS=y # # Supported SAA7146 based PCI Adapters # +# CONFIG_TTPCI_EEPROM is not set +# CONFIG_DVB_AV7110 is not set +# CONFIG_DVB_BUDGET_CORE is not set # # Supported FlexCopII (B2C2) Adapters @@ -780,6 +877,11 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_PLUTO2 is not set # +# Supported SDMC DM1105 Adapters +# +# CONFIG_DVB_DM1105 is not set + +# # Supported DVB Frontends # @@ -791,14 +893,21 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # DVB-S (satellite) frontends # -# CONFIG_DVB_STV0299 is not set # CONFIG_DVB_CX24110 is not set # CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_MT312 is not set -# CONFIG_DVB_VES1X93 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0288 is not set +# CONFIG_DVB_STB6000 is not set +# CONFIG_DVB_STV0299 is not set +# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_VES1X93 is not set +# CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_TDA826X is not set +# CONFIG_DVB_TUA6100 is not set +# CONFIG_DVB_CX24116 is not set +# CONFIG_DVB_SI21XX is not set # # DVB-T (terrestrial) frontends @@ -807,6 +916,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_SP887X is not set # CONFIG_DVB_CX22700 is not set # CONFIG_DVB_CX22702 is not set +# CONFIG_DVB_DRX397XD is not set # CONFIG_DVB_L64781 is not set # CONFIG_DVB_TDA1004X is not set # CONFIG_DVB_NXT6000 is not set @@ -816,6 +926,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_DIB3000MC is not set # CONFIG_DVB_DIB7000M is not set # CONFIG_DVB_DIB7000P is not set +# CONFIG_DVB_TDA10048 is not set # # DVB-C (cable) frontends @@ -834,25 +945,28 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set # CONFIG_DVB_S5H1409 is not set +# CONFIG_DVB_AU8522 is not set +# CONFIG_DVB_S5H1411 is not set # -# Tuners/PLL support +# Digital terrestrial only tuners/PLL # # CONFIG_DVB_PLL is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TDA827X is not set -# CONFIG_DVB_TUNER_QT1010 is not set -# CONFIG_DVB_TUNER_MT2060 is not set -# CONFIG_DVB_TUNER_MT2266 is not set -# CONFIG_DVB_TUNER_MT2131 is not set # CONFIG_DVB_TUNER_DIB0070 is not set # -# Miscellaneous devices +# SEC control devices for DVB-S # # CONFIG_DVB_LNBP21 is not set +# CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_TUA6100 is not set +# CONFIG_DVB_LGS8GL5 is not set + +# +# Tools to develop new frontends +# +# CONFIG_DVB_DUMMY_FE is not set +# CONFIG_DVB_AF9013 is not set CONFIG_DAB=y # @@ -864,15 +978,16 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -897,6 +1012,7 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -905,7 +1021,10 @@ CONFIG_FB_MODE_HELPERS=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_SH_MOBILE_LCDC=m # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -938,38 +1057,42 @@ CONFIG_LOGO=y # CONFIG_LOGO_SUPERH_MONO is not set # CONFIG_LOGO_SUPERH_VGA16 is not set CONFIG_LOGO_SUPERH_CLUT224=y - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -981,22 +1104,20 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -CONFIG_MINIX_FS=y -CONFIG_ROMFS_FS=y +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -1020,6 +1141,7 @@ CONFIG_DNOTIFY=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1039,8 +1161,11 @@ CONFIG_HUGETLB_PAGE=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -1048,14 +1173,13 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1087,9 +1211,6 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1098,6 +1219,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -1105,9 +1227,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1123,15 +1248,20 @@ CONFIG_DEBUG_PREEMPT=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set -# CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DEBUG_BOOTMEM is not set # CONFIG_DEBUG_STACK_USAGE is not set @@ -1147,8 +1277,93 @@ CONFIG_SH64_SR_WATCH=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines @@ -1156,6 +1371,7 @@ CONFIG_SH64_SR_WATCH=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig index 3dc1cbd8a981..be4c2e0dbb26 100644 --- a/arch/sh/configs/dreamcast_defconfig +++ b/arch/sh/configs/dreamcast_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc1 -# Mon Aug 4 16:49:13 2008 +# Linux kernel version: 2.6.27 +# Wed Oct 22 18:18:02 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -13,12 +13,13 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y @@ -70,7 +71,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -78,15 +81,12 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set # CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -119,6 +119,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type @@ -192,12 +193,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration @@ -230,7 +232,6 @@ CONFIG_SH_DREAMCAST=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=49876504 -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -318,6 +319,8 @@ CONFIG_PCI_LEGACY=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_NET=y @@ -365,6 +368,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -385,11 +389,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -480,6 +483,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -504,6 +510,7 @@ CONFIG_8139TOO=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -559,6 +566,7 @@ CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -626,6 +634,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ALIM7101_WDT is not set CONFIG_SH_WDT=y # CONFIG_SH_WDT_MMAP is not set @@ -647,6 +656,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -673,6 +684,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -707,6 +719,7 @@ CONFIG_FB_PVR2=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -718,6 +731,7 @@ CONFIG_FB_PVR2=y # CONFIG_FB_CARMINE is not set # CONFIG_FB_SH_MOBILE_LCDC is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -755,6 +769,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -764,6 +784,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_BLACKLIST_HUB is not set # +# Enable Host or Gadget support to see Inventra options +# + +# # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set @@ -775,16 +799,18 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -814,6 +840,7 @@ CONFIG_INOTIFY_USER=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -872,6 +899,11 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -882,12 +914,14 @@ CONFIG_FRAME_WARN=1024 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -960,6 +994,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -967,7 +1006,6 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/edosk7760_defconfig b/arch/sh/configs/edosk7760_defconfig index bef07fa8d858..158006847ad6 100644 --- a/arch/sh/configs/edosk7760_defconfig +++ b/arch/sh/configs/edosk7760_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Tue Aug 26 11:36:09 2008 +# Linux kernel version: 2.6.27 +# Wed Oct 22 18:20:09 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -55,7 +57,6 @@ CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -72,7 +73,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -80,10 +83,13 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -100,6 +106,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -114,6 +121,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type @@ -171,7 +179,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -179,12 +189,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration @@ -254,9 +265,10 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y @@ -283,11 +295,9 @@ CONFIG_CMDLINE="mem=64M console=ttySC2,115200 root=/dev/nfs rw nfsroot=192.168.0 # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -332,6 +342,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -352,11 +363,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -472,6 +482,7 @@ CONFIG_BLK_DEV_RAM_SIZE=26000 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -486,7 +497,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -498,12 +508,15 @@ CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_STNIC is not set -# CONFIG_SMC9194 is not set CONFIG_SMC91X=y +# CONFIG_SMC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -558,6 +571,7 @@ CONFIG_INPUT=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set @@ -588,26 +602,41 @@ CONFIG_HW_RANDOM=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# # CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set +CONFIG_I2C_SH7760=y +# CONFIG_I2C_SH_MOBILE is not set # CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set # CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set -CONFIG_I2C_SH7760=y -# CONFIG_I2C_SH_MOBILE is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -632,8 +661,12 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set # # Multimedia devices @@ -659,6 +692,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=m # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=m CONFIG_FB_CFB_COPYAREA=m CONFIG_FB_CFB_IMAGEBLIT=m @@ -677,9 +711,11 @@ CONFIG_FB_TILEBLITTING=y # # Frame buffer hardware drivers # -# CONFIG_FB_MB86290_640X480_16BPP is not set # CONFIG_FB_S1D13XXX is not set +CONFIG_FB_SH_MOBILE_LCDC=m +# CONFIG_FB_SH7760 is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -693,15 +729,8 @@ CONFIG_FB_TILEBLITTING=y CONFIG_DUMMY_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE is not set # CONFIG_LOGO is not set - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +# CONFIG_SOUND_OSS_CORE is not set CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -713,39 +742,18 @@ CONFIG_SND_PCM=y # CONFIG_SND_VERBOSE_PROCFS is not set CONFIG_SND_VERBOSE_PRINTK=y # CONFIG_SND_DEBUG is not set - -# -# Generic devices -# +CONFIG_SND_DRIVERS=y # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set - -# -# SUPERH devices -# - -# -# System on Chip audio support -# +CONFIG_SND_SUPERH=y CONFIG_SND_SOC=y # # SoC Audio support for SuperH # - -# -# ALSA SoC audio for Freescale SOCs -# - -# -# SoC Audio for the Texas Instruments OMAP -# - -# -# Open Sound System -# +# CONFIG_SND_SOC_ALL_CODECS is not set # CONFIG_SOUND_PRIME is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set @@ -754,7 +762,9 @@ CONFIG_SND_SOC=y # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -764,17 +774,18 @@ CONFIG_EXT2_FS_XATTR=y # CONFIG_EXT2_FS_POSIX_ACL is not set # CONFIG_EXT2_FS_SECURITY is not set CONFIG_EXT2_FS_XIP=y -CONFIG_FS_XIP=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set +CONFIG_FS_XIP=y CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -805,6 +816,7 @@ CONFIG_GENERIC_ACL=y CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y @@ -826,6 +838,7 @@ CONFIG_TMPFS_POSIX_ACL=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -835,12 +848,12 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -911,6 +924,8 @@ CONFIG_UNUSED_SYMBOLS=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set CONFIG_TIMER_STATS=y @@ -932,13 +947,27 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_FRAME_POINTER is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y @@ -956,12 +985,14 @@ CONFIG_DEBUG_STACKOVERFLOW=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1001,6 +1032,10 @@ CONFIG_CRYPTO_ALGAPI=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1031,15 +1066,20 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig index 41e25b3a5b01..1032b235f080 100644 --- a/arch/sh/configs/hp6xx_defconfig +++ b/arch/sh/configs/hp6xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Wed Jul 30 01:24:57 2008 +# Linux kernel version: 2.6.27 +# Wed Oct 22 18:23:53 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -11,18 +11,19 @@ CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_SYS_SUPPORTS_PM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -67,22 +68,21 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -108,6 +108,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +CONFIG_FREEZER=y # # System type @@ -175,12 +176,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration @@ -212,7 +214,6 @@ CONFIG_SH_HP6XX=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=22110000 -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -257,6 +258,7 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -292,6 +294,8 @@ CONFIG_PCMCIA_PROBE=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # @@ -304,10 +308,6 @@ CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_APM_EMULATION=y - -# -# Networking -# # CONFIG_NET is not set # @@ -446,7 +446,6 @@ CONFIG_TOUCHSCREEN_HP600=y # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set -# CONFIG_TOUCHSCREEN_UCB1400 is not set # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set # CONFIG_INPUT_MISC is not set @@ -522,6 +521,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -546,6 +547,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -568,6 +570,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_HIT=y CONFIG_FB_SH_MOBILE_LCDC=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y # CONFIG_LCD_ILI9320 is not set @@ -630,12 +633,15 @@ CONFIG_RTC_INTF_DEV=y # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -644,6 +650,7 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_SH=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -652,10 +659,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -687,6 +695,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLBFS is not set @@ -774,6 +783,11 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -784,14 +798,19 @@ CONFIG_FRAME_WARN=1024 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -863,13 +882,17 @@ CONFIG_CRYPTO_MD5=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set CONFIG_CRC16=y CONFIG_CRC_T10DIF=y diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig index 99cc39c5c6ca..b82dfb4da3aa 100644 --- a/arch/sh/configs/landisk_defconfig +++ b/arch/sh/configs/landisk_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Wed Jul 30 01:35:07 2008 +# Linux kernel version: 2.6.27 +# Wed Oct 22 18:25:51 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -11,17 +11,18 @@ CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -68,22 +69,22 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -115,6 +116,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type @@ -182,12 +184,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration @@ -225,7 +228,6 @@ CONFIG_SH_LANDISK=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=33333333 -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -261,6 +263,7 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -309,11 +312,9 @@ CONFIG_PCCARD_NONSTATIC=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -360,7 +361,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -374,10 +374,12 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set CONFIG_IP_NF_QUEUE=m # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -386,6 +388,7 @@ CONFIG_IP_NF_QUEUE=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -408,11 +411,10 @@ CONFIG_ATALK=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -462,22 +464,20 @@ CONFIG_MISC_DEVICES=y # CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECS is not set # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -640,6 +640,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -660,6 +663,7 @@ CONFIG_8139CP=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -680,9 +684,11 @@ CONFIG_NETDEV_1000=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -692,6 +698,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -727,7 +734,7 @@ CONFIG_USB_RTL8150=m # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -838,6 +845,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -861,10 +870,12 @@ CONFIG_VIDEO_V4L2=m CONFIG_VIDEO_V4L1=m CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_VIDEO_CPIA2 is not set +# CONFIG_SOC_CAMERA is not set CONFIG_V4L_USB_DRIVERS=y # CONFIG_USB_VIDEO_CLASS is not set # CONFIG_USB_GSPCA is not set @@ -884,14 +895,13 @@ CONFIG_USB_PWC=m # CONFIG_USB_ZR364XX is not set # CONFIG_USB_STKWEBCAM is not set # CONFIG_USB_S2255 is not set -# CONFIG_SOC_CAMERA is not set -# CONFIG_VIDEO_SH_MOBILE_CEU is not set CONFIG_RADIO_ADAPTERS=y # CONFIG_RADIO_GEMTEK_PCI is not set # CONFIG_RADIO_MAXIRADIO is not set # CONFIG_RADIO_MAESTRO is not set CONFIG_USB_DSBR=m # CONFIG_USB_SI470X is not set +# CONFIG_USB_MR800 is not set # CONFIG_DAB is not set # @@ -914,6 +924,7 @@ CONFIG_USB_DSBR=m CONFIG_DUMMY_CONSOLE=y CONFIG_FONT_8x16=y CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y # CONFIG_SND is not set CONFIG_SOUND_PRIME=m CONFIG_HID_SUPPORT=y @@ -925,8 +936,7 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=m -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set # @@ -934,6 +944,34 @@ CONFIG_USB_HID=m # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=m +CONFIG_HID_APPLE=m +CONFIG_HID_BELKIN=m +CONFIG_HID_BRIGHT=m +CONFIG_HID_CHERRY=m +CONFIG_HID_CHICONY=m +CONFIG_HID_CYPRESS=m +CONFIG_HID_DELL=m +CONFIG_HID_EZKEY=m +CONFIG_HID_GYRATION=m +CONFIG_HID_LOGITECH=m +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=m +CONFIG_HID_MONTEREY=m +CONFIG_HID_PANTHERLORD=m +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=m +CONFIG_HID_SAMSUNG=m +CONFIG_HID_SONY=m +CONFIG_HID_SUNPLUS=m +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -951,6 +989,7 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -975,6 +1014,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1004,7 +1044,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1059,7 +1098,7 @@ CONFIG_USB_SERIAL_PL2303=m CONFIG_USB_EMI62=m CONFIG_USB_EMI26=m # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1078,6 +1117,7 @@ CONFIG_USB_SISUSBVGA_CON=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1087,6 +1127,7 @@ CONFIG_USB_SISUSBVGA_CON=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1098,7 +1139,7 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y CONFIG_REISERFS_FS=y @@ -1107,6 +1148,7 @@ CONFIG_REISERFS_FS=y # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1143,6 +1185,7 @@ CONFIG_NTFS_RW=y CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1185,6 +1228,7 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_NFS_COMMON=y CONFIG_SUNRPC=m +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1256,6 +1300,11 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -1267,12 +1316,14 @@ CONFIG_SH_STANDARD_BIOS=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1345,6 +1396,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -1352,7 +1408,6 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig index aecdfd33c695..c3ecedfc1bc7 100644 --- a/arch/sh/configs/lboxre2_defconfig +++ b/arch/sh/configs/lboxre2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Wed Jul 30 01:39:41 2008 +# Linux kernel version: 2.6.27 +# Wed Oct 22 18:29:42 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -11,17 +11,18 @@ CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -68,22 +69,22 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -115,6 +116,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type @@ -182,12 +184,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration @@ -225,7 +228,6 @@ CONFIG_SH_LBOX_RE2=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=40000000 -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -261,6 +263,7 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -309,11 +312,9 @@ CONFIG_PCCARD_NONSTATIC=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -360,7 +361,6 @@ CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -374,10 +374,12 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -386,6 +388,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -406,11 +409,10 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -631,6 +633,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -655,6 +660,7 @@ CONFIG_8139TOO_TUNE_TWISTER=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -675,9 +681,11 @@ CONFIG_NETDEV_1000=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -687,6 +695,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -832,6 +841,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -872,6 +883,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -881,6 +898,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_BLACKLIST_HUB is not set # +# Enable Host or Gadget support to see Inventra options +# + +# # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set @@ -911,12 +932,15 @@ CONFIG_RTC_INTF_DEV=y # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -925,6 +949,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_SH is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -936,12 +961,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -974,6 +1000,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1071,6 +1098,11 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -1082,12 +1114,14 @@ CONFIG_SH_STANDARD_BIOS=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1160,6 +1194,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -1167,7 +1206,6 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig index a3a80f3d27c0..499ed7204385 100644 --- a/arch/sh/configs/magicpanelr2_defconfig +++ b/arch/sh/configs/magicpanelr2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Wed Jul 30 01:41:08 2008 +# Linux kernel version: 2.6.27 +# Wed Oct 22 18:32:23 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -11,16 +11,17 @@ CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -55,7 +56,6 @@ CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -72,22 +72,22 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -119,6 +119,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type @@ -186,12 +187,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration @@ -229,7 +231,6 @@ CONFIG_SH_MAGIC_PANEL_R2_VERSION=3 CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=24000000 -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -268,6 +269,7 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -291,11 +293,9 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -340,6 +340,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -360,11 +361,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -513,6 +513,9 @@ CONFIG_SMC911X=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -560,11 +563,13 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_SH_KEYSC is not set CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set @@ -641,6 +646,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -703,12 +710,15 @@ CONFIG_RTC_INTF_DEV=y # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -717,6 +727,7 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_SH=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -726,11 +737,12 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -759,6 +771,7 @@ CONFIG_JBD=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -806,6 +819,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -899,10 +913,22 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y @@ -938,6 +964,7 @@ CONFIG_KGDB_DEFBITS_8=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set @@ -945,7 +972,6 @@ CONFIG_KGDB_DEFBITS_8=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m CONFIG_CRC16=m # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig index e4b900e72dcd..b8ada8ce98d9 100644 --- a/arch/sh/configs/microdev_defconfig +++ b/arch/sh/configs/microdev_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Wed Jul 30 01:47:16 2008 +# Linux kernel version: 2.6.27 +# Wed Oct 22 18:37:41 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -11,16 +11,17 @@ CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -69,22 +70,21 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -110,6 +110,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type @@ -183,12 +184,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration @@ -221,7 +223,6 @@ CONFIG_SH_SH4202_MICRODEV=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=66000000 -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -260,6 +261,7 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y @@ -287,11 +289,9 @@ CONFIG_SUPERHYWAY=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -340,6 +340,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -360,11 +361,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -402,19 +402,17 @@ CONFIG_MISC_DEVICES=y # CONFIG_ENCLOSURE_SERVICES is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=1 -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -451,6 +449,9 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y @@ -542,6 +543,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -581,6 +584,10 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_OTG_BLACKLIST_HUB is not set # +# Enable Host or Gadget support to see Inventra options +# + +# # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set @@ -591,6 +598,7 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -602,12 +610,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -640,6 +649,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -678,6 +688,7 @@ CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -748,6 +759,11 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -758,14 +774,19 @@ CONFIG_FRAME_WARN=1024 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -837,13 +858,17 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig index 4f8b1974f2c7..624c47aa66d3 100644 --- a/arch/sh/configs/migor_defconfig +++ b/arch/sh/configs/migor_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Tue Aug 26 14:18:17 2008 +# Linux kernel version: 2.6.27 +# Tue Oct 21 12:57:28 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -13,12 +13,13 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y @@ -70,7 +71,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -78,15 +81,12 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -118,6 +118,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type @@ -179,6 +180,7 @@ CONFIG_MAX_ACTIVE_REGIONS=2 CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set @@ -192,13 +194,14 @@ CONFIG_SPARSEMEM=y CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set # CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_MIGRATION is not set # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration @@ -235,7 +238,6 @@ CONFIG_SH_MIGOR_QVGA=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=33333333 -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -295,6 +297,8 @@ CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ip=on" # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_NET=y @@ -345,6 +349,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -365,11 +370,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set @@ -555,6 +559,9 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -599,6 +606,7 @@ CONFIG_INPUT_KEYBOARD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set CONFIG_KEYBOARD_SH_KEYSC=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set @@ -656,6 +664,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_GPIO is not set # CONFIG_I2C_OCORES is not set CONFIG_I2C_SH_MOBILE=y # CONFIG_I2C_SIMTEC is not set @@ -709,6 +718,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set # # Multimedia devices @@ -717,13 +728,44 @@ CONFIG_SSB_POSSIBLE=y # # Multimedia core support # -# CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +# CONFIG_VIDEO_ALLOW_V4L1 is not set +CONFIG_VIDEO_V4L1_COMPAT=y # CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set +CONFIG_VIDEO_MEDIA=y # # Multimedia drivers # +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEOBUF_GEN=y +CONFIG_VIDEOBUF_DMA_CONTIG=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +CONFIG_SOC_CAMERA=y +# CONFIG_SOC_CAMERA_MT9M001 is not set +# CONFIG_SOC_CAMERA_MT9M111 is not set +# CONFIG_SOC_CAMERA_MT9V022 is not set +CONFIG_SOC_CAMERA_PLATFORM=y +CONFIG_VIDEO_SH_MOBILE_CEU=y +# CONFIG_RADIO_ADAPTERS is not set # CONFIG_DAB is not set # @@ -748,6 +790,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -755,7 +803,6 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set -# CONFIG_USB_MUSB_HDRC is not set # CONFIG_USB_GADGET_MUSB_HDRC is not set # @@ -764,21 +811,23 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG_FILES is not set # CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_LH7A40X is not set +# CONFIG_USB_GADGET_OMAP is not set # CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_S3C2410 is not set CONFIG_USB_GADGET_M66592=y CONFIG_USB_M66592=y CONFIG_SUPERH_BUILT_IN_M66592=y -# CONFIG_USB_GADGET_PXA27X is not set +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_GOKU is not set -# CONFIG_USB_GADGET_LH7A40X is not set -# CONFIG_USB_GADGET_OMAP is not set -# CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set @@ -831,12 +880,15 @@ CONFIG_RTC_DRV_RS5C372=y # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -848,16 +900,19 @@ CONFIG_UIO=y # CONFIG_UIO_PDRV is not set CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_UIO_SMX is not set +# CONFIG_UIO_SERCOS3 is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -886,6 +941,7 @@ CONFIG_UIO_PDRV_GENIRQ=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -938,6 +994,11 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y @@ -950,12 +1011,14 @@ CONFIG_EARLY_PRINTK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1028,13 +1091,17 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig index 57a300797584..2e65149e9502 100644 --- a/arch/sh/configs/r7780mp_defconfig +++ b/arch/sh/configs/r7780mp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Wed Jul 30 01:51:13 2008 +# Linux kernel version: 2.6.27 +# Wed Oct 22 20:03:46 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -11,17 +11,18 @@ CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_IO_TRAPPED=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -77,7 +78,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -85,15 +88,13 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -124,6 +125,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type @@ -199,12 +201,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration @@ -242,7 +245,6 @@ CONFIG_SH_R7780MP=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=28 CONFIG_SH_PCLK_FREQ=32000000 -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -278,6 +280,7 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y @@ -309,11 +312,9 @@ CONFIG_PCI_LEGACY=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -369,6 +370,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ATM is not set CONFIG_STP=m CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -390,11 +392,10 @@ CONFIG_LLC=m # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set @@ -616,6 +617,9 @@ CONFIG_AX88796_93CX6=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y CONFIG_PCNET32=m # CONFIG_AMD8111_ETH is not set @@ -641,11 +645,11 @@ CONFIG_8139TOO_8129=y CONFIG_VIA_RHINE=m CONFIG_VIA_RHINE_MMIO=y # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set CONFIG_E1000=m -# CONFIG_E1000_DISABLE_PACKET_SPLIT is not set # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set @@ -662,9 +666,11 @@ CONFIG_R8169=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -674,6 +680,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -773,24 +780,129 @@ CONFIG_HW_RANDOM=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_HIGHLANDER=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SH_MOBILE is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set @@ -810,6 +922,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set # # Multimedia devices @@ -841,12 +956,19 @@ CONFIG_DAB=y # # CONFIG_DISPLAY_SUPPORT is not set CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y # CONFIG_SND is not set CONFIG_SOUND_PRIME=m CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -856,6 +978,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_BLACKLIST_HUB is not set # +# Enable Host or Gadget support to see Inventra options +# + +# # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set @@ -880,18 +1006,37 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_TEST is not set # +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_RS5C372=y +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# # SPI RTC drivers # # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -900,6 +1045,7 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_SH=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -911,13 +1057,14 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -952,6 +1099,7 @@ CONFIG_NTFS_RW=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -994,6 +1142,7 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1088,10 +1237,22 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_FRAME_POINTER is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -1108,15 +1269,19 @@ CONFIG_DEBUG_STACKOVERFLOW=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1189,6 +1354,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -1196,7 +1366,6 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig index 1d09d24d4298..043a8a509e09 100644 --- a/arch/sh/configs/r7785rp_defconfig +++ b/arch/sh/configs/r7785rp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Wed Jul 30 00:59:19 2008 +# Linux kernel version: 2.6.27 +# Wed Oct 22 16:25:30 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -11,18 +11,19 @@ CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_IO_TRAPPED=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -38,11 +39,13 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set +CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_TREE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -67,31 +70,33 @@ CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set +CONFIG_FUTEX=y CONFIG_ANON_INODES=y -# CONFIG_EPOLL is not set +CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y # CONFIG_MARKERS is not set -CONFIG_OPROFILE=m +CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_KPROBES=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y @@ -120,7 +125,8 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y +# CONFIG_CLASSIC_RCU is not set +# CONFIG_FREEZER is not set # # System type @@ -182,6 +188,7 @@ CONFIG_MAX_ACTIVE_REGIONS=2 CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set @@ -200,13 +207,15 @@ CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set # CONFIG_MEMORY_HOTPLUG is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration @@ -243,15 +252,30 @@ CONFIG_SH_R7785RP=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=28 CONFIG_SH_PCLK_FREQ=50000000 -# CONFIG_TICK_ONESHOT is not set -# CONFIG_NO_HZ is not set -# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling # -# CONFIG_CPU_FREQ is not set +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_SH_CPU_FREQ=y # # DMA support @@ -276,13 +300,15 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_PREEMPT_RCU is not set +CONFIG_PREEMPT_RCU=y +CONFIG_RCU_TRACE=y CONFIG_GUSA=y # @@ -301,7 +327,7 @@ CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y # CONFIG_ARCH_SUPPORTS_MSI is not set -CONFIG_PCI_LEGACY=y +# CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -310,11 +336,9 @@ CONFIG_PCI_LEGACY=y # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set - -# -# Networking -# +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set +CONFIG_BINFMT_MISC=m CONFIG_NET=y # @@ -370,6 +394,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ATM is not set CONFIG_STP=m CONFIG_BRIDGE=m +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set CONFIG_LLC=m @@ -386,16 +411,16 @@ CONFIG_LLC=m # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set @@ -617,8 +642,12 @@ CONFIG_AX88796_93CX6=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -639,9 +668,11 @@ CONFIG_R8169=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -651,6 +682,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -750,24 +782,129 @@ CONFIG_HW_RANDOM=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y -# CONFIG_I2C is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# PC SMBus host controller drivers +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_ISCH is not set +# CONFIG_I2C_PIIX4 is not set +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +CONFIG_I2C_HIGHLANDER=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SH_MOBILE is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Graphics adapter I2C/DDC channel drivers +# +# CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set # CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set @@ -787,6 +924,9 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set # # Multimedia devices @@ -813,6 +953,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=m CONFIG_FB_CFB_COPYAREA=m CONFIG_FB_CFB_IMAGEBLIT=m @@ -846,6 +987,7 @@ CONFIG_FB_CFB_IMAGEBLIT=m # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -857,6 +999,7 @@ CONFIG_FB_CFB_IMAGEBLIT=m # CONFIG_FB_CARMINE is not set CONFIG_FB_SH_MOBILE_LCDC=m # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -865,12 +1008,19 @@ CONFIG_FB_SH_MOBILE_LCDC=m # CONFIG_DISPLAY_SUPPORT is not set # CONFIG_LOGO is not set CONFIG_SOUND=m +CONFIG_SOUND_OSS_CORE=y # CONFIG_SND is not set CONFIG_SOUND_PRIME=m CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -880,6 +1030,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_OTG_BLACKLIST_HUB is not set # +# Enable Host or Gadget support to see Inventra options +# + +# # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set @@ -904,18 +1058,37 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_TEST is not set # +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_RS5C372=y +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# # SPI RTC drivers # # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -924,6 +1097,7 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_SH=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -935,13 +1109,14 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -976,6 +1151,7 @@ CONFIG_NTFS_RW=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1018,6 +1194,7 @@ CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1094,6 +1271,8 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_PREEMPT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y @@ -1113,10 +1292,23 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -1133,15 +1325,19 @@ CONFIG_4KSTACKS=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1214,6 +1410,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -1221,7 +1422,6 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1229,6 +1429,8 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_AUDIT_GENERIC=y +CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig index 840fe3843ffa..85b0ac4fc667 100644 --- a/arch/sh/configs/rsk7203_defconfig +++ b/arch/sh/configs/rsk7203_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Mon Jul 28 22:23:03 2008 +# Linux kernel version: 2.6.27 +# Tue Oct 21 12:58:47 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_GPIO=y # CONFIG_GENERIC_TIME is not set # CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -56,7 +58,6 @@ CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -72,7 +73,9 @@ CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y # CONFIG_SLAB is not set # CONFIG_SLUB is not set CONFIG_SLOB=y @@ -80,14 +83,12 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 @@ -117,6 +118,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type @@ -183,10 +185,10 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -219,7 +221,6 @@ CONFIG_SH_CMT=y CONFIG_SH_TIMER_IRQ=142 CONFIG_SH_PCLK_FREQ=16670800 CONFIG_SH_CLK_MD=0 -# CONFIG_TICK_ONESHOT is not set # # CPU Frequency scaling @@ -266,6 +267,7 @@ CONFIG_HZ=1000 # CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -292,11 +294,8 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -339,6 +338,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -359,11 +359,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -442,7 +441,6 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0x0 CONFIG_MTD_PHYSMAP_LEN=0x0 CONFIG_MTD_PHYSMAP_BANKWIDTH=4 -# CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set # @@ -509,6 +507,9 @@ CONFIG_SMC911X=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -541,7 +542,7 @@ CONFIG_SMC911X=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -615,6 +616,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -655,9 +658,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -675,6 +705,7 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -691,6 +722,7 @@ CONFIG_USB_R8A66597_HCD=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -705,7 +737,6 @@ CONFIG_USB_R8A66597_HCD=y # USB Imaging devices # # CONFIG_USB_MDC800 is not set -CONFIG_USB_MON=y # # USB port drivers @@ -718,7 +749,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -735,6 +766,7 @@ CONFIG_USB_MON=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -762,12 +794,15 @@ CONFIG_RTC_INTF_DEV=y # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -776,16 +811,18 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_SH=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -847,6 +884,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -905,10 +943,21 @@ CONFIG_DEBUG_WRITECOUNT=y CONFIG_DEBUG_LIST=y CONFIG_DEBUG_SG=y CONFIG_FRAME_POINTER=y -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y @@ -924,6 +973,7 @@ CONFIG_DEBUG_STACK_USAGE=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set @@ -931,7 +981,6 @@ CONFIG_DEBUG_STACK_USAGE=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig index 8413236c1b37..7d2a9e88838b 100644 --- a/arch/sh/configs/rts7751r2d1_defconfig +++ b/arch/sh/configs/rts7751r2d1_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Wed Jul 30 01:55:52 2008 +# Linux kernel version: 2.6.27 +# Wed Oct 22 18:44:36 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -11,17 +11,18 @@ CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_IO_TRAPPED=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -69,7 +70,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -77,15 +80,13 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -116,6 +117,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type @@ -183,12 +185,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration @@ -232,7 +235,6 @@ CONFIG_RTS7751R2D_1=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=60000000 -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -268,6 +270,7 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -302,11 +305,9 @@ CONFIG_HOTPLUG_PCI=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -353,6 +354,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -373,11 +375,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set @@ -598,6 +599,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -622,6 +626,7 @@ CONFIG_8139TOO=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -642,9 +647,11 @@ CONFIG_NETDEV_1000=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -654,6 +661,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -688,7 +696,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -776,11 +784,13 @@ CONFIG_SPI_SH_SCI=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set @@ -808,6 +818,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=y # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -835,6 +847,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -868,6 +881,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -880,6 +894,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_SH_MOBILE_LCDC=m CONFIG_FB_SM501=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -905,6 +920,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_SUPERH_VGA16 is not set CONFIG_LOGO_SUPERH_CLUT224=y CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -1005,9 +1021,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1025,6 +1068,7 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set # # USB Host Controller Drivers @@ -1047,6 +1091,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1076,7 +1121,6 @@ CONFIG_USB_LIBUSUAL=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -1089,7 +1133,7 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1105,6 +1149,7 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1134,16 +1179,20 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_MAX6902 is not set CONFIG_RTC_DRV_R9701=y # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1152,6 +1201,7 @@ CONFIG_RTC_DRV_R9701=y # CONFIG_RTC_DRV_SH is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1160,10 +1210,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1196,6 +1247,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1293,6 +1345,11 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y @@ -1305,12 +1362,14 @@ CONFIG_EARLY_PRINTK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1383,6 +1442,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -1390,7 +1454,6 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig index 7d9fa6e9ded5..f680d3eecdfb 100644 --- a/arch/sh/configs/rts7751r2dplus_defconfig +++ b/arch/sh/configs/rts7751r2dplus_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Wed Jul 30 01:59:18 2008 +# Linux kernel version: 2.6.27 +# Wed Oct 22 18:47:39 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -11,17 +11,18 @@ CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_IO_TRAPPED=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -69,7 +70,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -77,15 +80,13 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -116,6 +117,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type @@ -183,12 +185,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration @@ -232,7 +235,6 @@ CONFIG_RTS7751R2D_PLUS=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=60000000 -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -268,6 +270,7 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -302,11 +305,9 @@ CONFIG_HOTPLUG_PCI=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -353,6 +354,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -373,11 +375,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set @@ -598,6 +599,9 @@ CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -622,6 +626,7 @@ CONFIG_8139TOO=y # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -642,9 +647,11 @@ CONFIG_NETDEV_1000=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set # CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set # CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set @@ -654,6 +661,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_QLGE is not set # CONFIG_SFC is not set # CONFIG_TR is not set @@ -688,7 +696,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -776,11 +784,13 @@ CONFIG_SPI_SH_SCI=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SIS5595 is not set @@ -808,6 +818,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=y # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -835,6 +847,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -868,6 +881,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -880,6 +894,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_SH_MOBILE_LCDC=m CONFIG_FB_SM501=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -905,6 +920,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_SUPERH_VGA16 is not set CONFIG_LOGO_SUPERH_CLUT224=y CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m @@ -1005,9 +1021,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1025,6 +1068,7 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set # # USB Host Controller Drivers @@ -1047,6 +1091,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1076,7 +1121,6 @@ CONFIG_USB_LIBUSUAL=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -1089,7 +1133,7 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1105,6 +1149,7 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1134,16 +1179,20 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_MAX6902 is not set CONFIG_RTC_DRV_R9701=y # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1152,6 +1201,7 @@ CONFIG_RTC_DRV_R9701=y # CONFIG_RTC_DRV_SH is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1160,10 +1210,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1196,6 +1247,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1293,6 +1345,11 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y @@ -1305,12 +1362,14 @@ CONFIG_EARLY_PRINTK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1383,6 +1442,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -1390,7 +1454,6 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y diff --git a/arch/sh/configs/rts7751r2dplus_qemu_defconfig b/arch/sh/configs/rts7751r2dplus_qemu_defconfig index a72796c0293c..ae8f63000fbf 100644 --- a/arch/sh/configs/rts7751r2dplus_qemu_defconfig +++ b/arch/sh/configs/rts7751r2dplus_qemu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc2 -# Mon Aug 18 22:17:44 2008 +# Linux kernel version: 2.6.27 +# Wed Oct 22 18:51:20 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -13,12 +13,13 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y @@ -73,7 +74,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -81,15 +84,12 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -121,6 +121,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type @@ -188,12 +189,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration @@ -237,7 +239,6 @@ CONFIG_RTS7751R2D_PLUS=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=60000000 -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -299,6 +300,8 @@ CONFIG_CMDLINE="console=tty0 console=ttySC0,115200 root=/dev/sda1 earlyprintk=se # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_NET is not set @@ -467,10 +470,12 @@ CONFIG_SPI_BITBANG=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_ADCXX is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_IT87 is not set # CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -495,6 +500,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=y # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -519,6 +526,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -541,6 +549,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y CONFIG_FB_SH_MOBILE_LCDC=m CONFIG_FB_SM501=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -566,6 +575,7 @@ CONFIG_LOGO=y # CONFIG_LOGO_SUPERH_VGA16 is not set CONFIG_LOGO_SUPERH_CLUT224=y CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=m # CONFIG_SND_SEQUENCER is not set # CONFIG_SND_MIXER_OSS is not set @@ -588,6 +598,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -616,16 +632,20 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_MAX6902 is not set CONFIG_RTC_DRV_R9701=y # CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -634,6 +654,7 @@ CONFIG_RTC_DRV_R9701=y # CONFIG_RTC_DRV_SH is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -642,10 +663,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -677,6 +699,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -790,10 +813,21 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_FRAME_POINTER is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y @@ -811,12 +845,14 @@ CONFIG_EARLY_PRINTK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -889,13 +925,17 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig index 6d834f242905..543287b97a6a 100644 --- a/arch/sh/configs/sdk7780_defconfig +++ b/arch/sh/configs/sdk7780_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Wed Jul 30 02:00:12 2008 +# Linux kernel version: 2.6.27 +# Wed Oct 22 18:53:22 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -11,17 +11,18 @@ CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -56,7 +57,6 @@ CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -73,7 +73,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y @@ -81,15 +83,13 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -121,6 +121,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type @@ -196,12 +197,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration @@ -273,9 +275,10 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y @@ -328,11 +331,9 @@ CONFIG_HOTPLUG_PCI=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -406,6 +407,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -424,6 +426,7 @@ CONFIG_NET_SCHED=y # CONFIG_NET_SCH_HTB is not set # CONFIG_NET_SCH_HFSC is not set # CONFIG_NET_SCH_PRIO is not set +# CONFIG_NET_SCH_MULTIQ is not set # CONFIG_NET_SCH_RED is not set # CONFIG_NET_SCH_SFQ is not set # CONFIG_NET_SCH_TEQL is not set @@ -456,11 +459,10 @@ CONFIG_NET_SCH_FIFO=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -510,21 +512,19 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECS is not set # CONFIG_BLK_DEV_DELKIN is not set CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -748,9 +748,13 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_NET_PCI is not set # CONFIG_B44 is not set # CONFIG_NET_POCKET is not set +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -790,7 +794,7 @@ CONFIG_NET_POLL_CONTROLLER=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -825,6 +829,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -923,6 +928,8 @@ CONFIG_SSB_DRIVER_PCICORE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -949,6 +956,7 @@ CONFIG_SSB_DRIVER_PCICORE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=m CONFIG_FB_CFB_COPYAREA=m CONFIG_FB_CFB_IMAGEBLIT=m @@ -982,6 +990,7 @@ CONFIG_FB_CFB_IMAGEBLIT=m # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -993,6 +1002,7 @@ CONFIG_FB_CFB_IMAGEBLIT=m # CONFIG_FB_CARMINE is not set CONFIG_FB_SH_MOBILE_LCDC=m # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1022,6 +1032,7 @@ CONFIG_LOGO_SUPERH_MONO=y CONFIG_LOGO_SUPERH_VGA16=y CONFIG_LOGO_SUPERH_CLUT224=y CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y # CONFIG_SND is not set CONFIG_SOUND_PRIME=y CONFIG_HID_SUPPORT=y @@ -1033,9 +1044,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1053,6 +1091,7 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -1074,6 +1113,7 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1103,7 +1143,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1117,7 +1156,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1135,6 +1174,7 @@ CONFIG_USB_MON=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1155,6 +1195,7 @@ CONFIG_LEDS_CLASS=y # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1168,12 +1209,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1211,6 +1253,7 @@ CONFIG_NTFS_RW=y CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y @@ -1252,6 +1295,7 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1349,10 +1393,23 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_FRAME_POINTER is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -1369,12 +1426,14 @@ CONFIG_DEBUG_STACKOVERFLOW=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -1448,6 +1507,11 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -1455,7 +1519,6 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig index af15cbef12ba..25717ff26ca9 100644 --- a/arch/sh/configs/se7206_defconfig +++ b/arch/sh/configs/se7206_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Wed Jul 30 02:06:07 2008 +# Linux kernel version: 2.6.27 +# Wed Oct 22 18:57:39 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -11,16 +11,17 @@ CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set # CONFIG_GENERIC_TIME is not set # CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -45,6 +46,7 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_CGROUPS=y CONFIG_CGROUP_DEBUG=y CONFIG_CGROUP_NS=y +# CONFIG_CGROUP_FREEZER is not set CONFIG_CGROUP_DEVICE=y # CONFIG_GROUP_SCHED is not set CONFIG_CGROUP_CPUACCT=y @@ -80,7 +82,9 @@ CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y # CONFIG_SLAB is not set # CONFIG_SLUB is not set CONFIG_SLOB=y @@ -88,14 +92,12 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 @@ -126,6 +128,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" # CONFIG_CLASSIC_RCU is not set +# CONFIG_FREEZER is not set # # System type @@ -192,10 +195,10 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -228,7 +231,6 @@ CONFIG_SH_CMT=y CONFIG_SH_TIMER_IRQ=140 CONFIG_SH_PCLK_FREQ=33333333 CONFIG_SH_CLK_MD=6 -# CONFIG_TICK_ONESHOT is not set # # CPU Frequency scaling @@ -275,6 +277,7 @@ CONFIG_HZ=1000 # CONFIG_SCHED_HRTICK is not set CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y @@ -307,11 +310,8 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y - -# -# Networking -# CONFIG_NET=y # @@ -361,6 +361,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -381,11 +382,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -461,7 +461,6 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0x20000000 CONFIG_MTD_PHYSMAP_LEN=0x01000000 CONFIG_MTD_PHYSMAP_BANKWIDTH=4 -# CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set # @@ -531,6 +530,9 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -609,6 +611,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -666,12 +670,15 @@ CONFIG_RTC_INTF_DEV=y # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -680,6 +687,7 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_SH=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -687,10 +695,11 @@ CONFIG_RTC_DRV_SH=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -755,6 +764,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -811,10 +821,19 @@ CONFIG_DEBUG_VM=y CONFIG_DEBUG_LIST=y # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -828,12 +847,14 @@ CONFIG_DEBUG_STACK_USAGE=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set @@ -907,13 +928,17 @@ CONFIG_CRYPTO_ALGAPI=y # CONFIG_CRYPTO_DEFLATE=y CONFIG_CRYPTO_LZO=y + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y CONFIG_CRC16=y # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig index 4e30b70377e2..075f42ed5b09 100644 --- a/arch/sh/configs/se7343_defconfig +++ b/arch/sh/configs/se7343_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Wed Jul 30 02:08:38 2008 +# Linux kernel version: 2.6.27 +# Wed Oct 22 19:00:21 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -11,16 +11,17 @@ CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,22 +72,22 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y # CONFIG_SHMEM is not set +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 @@ -117,6 +118,7 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type @@ -186,12 +188,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration @@ -225,7 +228,6 @@ CONFIG_SH_7343_SOLUTION_ENGINE=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=27000000 -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -261,6 +263,7 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -284,11 +287,9 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -334,6 +335,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -354,11 +356,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -529,6 +530,9 @@ CONFIG_SMC91X=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y @@ -632,6 +636,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -655,11 +661,11 @@ CONFIG_VIDEO_V4L2=y CONFIG_VIDEO_V4L1=y CONFIG_VIDEO_CAPTURE_DRIVERS=y # CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set CONFIG_VIDEO_HELPER_CHIPS_AUTO=y # CONFIG_VIDEO_VIVI is not set # CONFIG_VIDEO_CPIA is not set # CONFIG_SOC_CAMERA is not set -# CONFIG_VIDEO_SH_MOBILE_CEU is not set CONFIG_RADIO_ADAPTERS=y # CONFIG_DAB is not set @@ -671,6 +677,7 @@ CONFIG_RADIO_ADAPTERS=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=m CONFIG_FB_CFB_COPYAREA=m CONFIG_FB_CFB_IMAGEBLIT=m @@ -692,6 +699,7 @@ CONFIG_FB_CFB_IMAGEBLIT=m # CONFIG_FB_S1D13XXX is not set CONFIG_FB_SH_MOBILE_LCDC=m # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -706,6 +714,7 @@ CONFIG_DUMMY_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE is not set # CONFIG_LOGO is not set CONFIG_SOUND=y +CONFIG_SOUND_OSS_CORE=y CONFIG_SND=y CONFIG_SND_TIMER=y CONFIG_SND_PCM=y @@ -734,6 +743,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -742,6 +757,7 @@ CONFIG_HID=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -753,12 +769,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -787,6 +804,7 @@ CONFIG_FS_MBCACHE=y CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -837,6 +855,7 @@ CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -868,6 +887,11 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y @@ -880,12 +904,14 @@ CONFIG_EARLY_PRINTK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -958,13 +984,17 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig index 80c1c72edb56..db9cacd7c4e7 100644 --- a/arch/sh/configs/se7619_defconfig +++ b/arch/sh/configs/se7619_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26 -# Wed Jul 30 02:12:32 2008 +# Linux kernel version: 2.6.27 +# Wed Oct 22 19:03:29 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -11,16 +11,17 @@ CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set # CONFIG_GENERIC_TIME is not set # CONFIG_GENERIC_CLOCKEVENTS is not set CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -58,21 +59,20 @@ CONFIG_ANON_INODES=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y +CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=1 @@ -96,6 +96,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type @@ -161,10 +162,10 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -196,7 +197,6 @@ CONFIG_SH_CMT=y CONFIG_SH_TIMER_IRQ=86 CONFIG_SH_PCLK_FREQ=31250000 CONFIG_SH_CLK_MD=5 -# CONFIG_TICK_ONESHOT is not set # # CPU Frequency scaling @@ -228,6 +228,7 @@ CONFIG_HZ=100 # CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -253,11 +254,8 @@ CONFIG_BINFMT_ELF_FDPIC=y CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# # CONFIG_NET is not set # @@ -328,7 +326,6 @@ CONFIG_MTD_PHYSMAP_START=0xa0000000 CONFIG_MTD_PHYSMAP_LEN=0x01000000 CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_SOLUTIONENGINE is not set -# CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set # @@ -455,6 +452,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -488,6 +487,12 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -497,6 +502,10 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_OTG_BLACKLIST_HUB is not set # +# Enable Host or Gadget support to see Inventra options +# + +# # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set @@ -507,16 +516,18 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set @@ -589,6 +600,11 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -597,6 +613,7 @@ CONFIG_FRAME_WARN=1024 # Security options # # CONFIG_KEYS is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set @@ -604,7 +621,6 @@ CONFIG_FRAME_WARN=1024 # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig index 490dcbc2ce33..d88190fdd7c1 100644 --- a/arch/sh/configs/se7705_defconfig +++ b/arch/sh/configs/se7705_defconfig @@ -1,34 +1,36 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.21-rc5 -# Thu Apr 26 09:16:31 2007 +# Linux kernel version: 2.6.27 +# Wed Oct 22 19:04:52 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set @@ -36,11 +38,13 @@ CONFIG_LOCALVERSION_AUTO=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set -CONFIG_SYSFS_DEPRECATED=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -53,32 +57,45 @@ CONFIG_UID16=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -92,59 +109,18 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type # -CONFIG_SOLUTION_ENGINE=y -CONFIG_SH_SOLUTION_ENGINE=y -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7780_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7722_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_HIGHLANDER is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_7206_SOLUTION_ENGINE is not set -# CONFIG_SH_7619_SOLUTION_ENGINE is not set -# CONFIG_SH_LBOX_RE2 is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH3=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set # CONFIG_CPU_SUBTYPE_SH7619 is not set - -# -# SH-2A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set CONFIG_CPU_SUBTYPE_SH7705=y # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -152,10 +128,8 @@ CONFIG_CPU_SUBTYPE_SH7705=y # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -164,63 +138,62 @@ CONFIG_CPU_SUBTYPE_SH7705=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x02000000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration # CONFIG_SH7705_CACHE_32KB=y # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set -CONFIG_CF_ENABLER=y -# CONFIG_CF_AREA5 is not set -CONFIG_CF_AREA6=y -# CONFIG_CF_AREA4 is not set -CONFIG_CF_BASE_ADDR=0xb8000000 +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features @@ -228,18 +201,27 @@ CONFIG_CF_BASE_ADDR=0xb8000000 CONFIG_CPU_LITTLE_ENDIAN=y # CONFIG_CPU_BIG_ENDIAN is not set # CONFIG_SH_FPU_EMU is not set -# CONFIG_SH_DSP is not set # CONFIG_SH_ADC is not set CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y # +# Board support +# +CONFIG_SOLUTION_ENGINE=y +CONFIG_SH_SOLUTION_ENGINE=y +# CONFIG_SH_EDOSK7705 is not set + +# # Timer and clock configuration # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=33333333 +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -254,7 +236,6 @@ CONFIG_SH_PCLK_FREQ=33333333 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set # # Additional SuperH Device Drivers @@ -270,55 +251,45 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 -# CONFIG_UBC_WAKEUP is not set # CONFIG_CMDLINE_BOOL is not set # # Bus options # -# CONFIG_PCI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# - -# -# PCI Hotplug Support -# +CONFIG_CF_ENABLER=y +# CONFIG_CF_AREA5 is not set +CONFIG_CF_AREA6=y +CONFIG_CF_BASE_ADDR=0xb8000000 +# CONFIG_ARCH_SUPPORTS_MSI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -326,6 +297,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -347,6 +319,7 @@ CONFIG_IP_PNP_RARP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -354,27 +327,14 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -384,10 +344,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -395,9 +351,19 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -409,21 +375,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -436,6 +395,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -461,7 +421,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -484,47 +443,29 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -532,73 +473,41 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_AX88796 is not set CONFIG_STNIC=y # CONFIG_SMC91X is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set @@ -609,21 +518,13 @@ CONFIG_PPP_DEFLATE=y # CONFIG_PPP_BSDCOMP is not set # CONFIG_PPP_MPPE is not set # CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set CONFIG_SLHC=y -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -631,13 +532,13 @@ CONFIG_SLHC=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -647,6 +548,7 @@ CONFIG_INPUT=y # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -664,6 +566,7 @@ CONFIG_SERIO=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -681,153 +584,110 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set # -# USB support +# Special HID drivers # -# CONFIG_USB_ARCH_HAS_HCD is not set +CONFIG_HID_COMPAT=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization -# +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -836,18 +696,16 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -871,11 +729,11 @@ CONFIG_DNOTIFY=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y # CONFIG_SYSFS is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # # Miscellaneous filesystems @@ -890,31 +748,33 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -922,40 +782,34 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set # -# Distributed Lock Manager -# - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_SH_KGDB is not set @@ -964,11 +818,92 @@ CONFIG_LOG_BUF_SHIFT=14 # Security options # # CONFIG_KEYS is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set # -# Cryptographic options +# Random Number Generation # -# CONFIG_CRYPTO is not set +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y # # Library routines @@ -976,10 +911,14 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig index 7be79cd04eb0..869ab1737deb 100644 --- a/arch/sh/configs/se7712_defconfig +++ b/arch/sh/configs/se7712_defconfig @@ -1,24 +1,26 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc6 -# Wed Jun 18 16:36:08 2008 +# Linux kernel version: 2.6.27 +# Wed Oct 22 19:08:12 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -51,7 +53,6 @@ CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -68,17 +69,22 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y # CONFIG_SHMEM is not set +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y @@ -88,12 +94,13 @@ CONFIG_MODULES=y # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -108,6 +115,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type @@ -167,6 +175,7 @@ CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -174,12 +183,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration @@ -207,7 +217,6 @@ CONFIG_CPU_HAS_DSP=y # CONFIG_SOLUTION_ENGINE=y CONFIG_SH_SOLUTION_ENGINE=y -# CONFIG_SH_AP325RXA is not set # # Timer and clock configuration @@ -215,7 +224,6 @@ CONFIG_SH_SOLUTION_ENGINE=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=66666666 -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -251,6 +259,7 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -279,11 +288,9 @@ CONFIG_CF_BASE_ADDR=0xb8000000 # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -297,6 +304,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=y CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -341,6 +349,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -359,7 +368,7 @@ CONFIG_NET_SCH_CBQ=y CONFIG_NET_SCH_HTB=y CONFIG_NET_SCH_HFSC=y CONFIG_NET_SCH_PRIO=y -# CONFIG_NET_SCH_RR is not set +# CONFIG_NET_SCH_MULTIQ is not set CONFIG_NET_SCH_RED=y CONFIG_NET_SCH_SFQ=y CONFIG_NET_SCH_TEQL=y @@ -395,12 +404,11 @@ CONFIG_NET_SCH_FIFO=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set CONFIG_FIB_RULES=y - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -418,6 +426,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -504,6 +514,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -550,6 +561,7 @@ CONFIG_SCSI_WAIT_SCAN=m CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -558,7 +570,6 @@ CONFIG_ATA_SFF=y CONFIG_PATA_PLATFORM=y # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -593,9 +604,11 @@ CONFIG_SH_ETH=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set CONFIG_NETDEV_10000=y # @@ -657,6 +670,7 @@ CONFIG_HW_RANDOM=m # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -668,8 +682,11 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -699,10 +716,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y @@ -713,6 +726,10 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_OTG_BLACKLIST_HUB is not set # +# Enable Host or Gadget support to see Inventra options +# + +# # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set @@ -734,7 +751,9 @@ CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -748,12 +767,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -782,6 +802,7 @@ CONFIG_FS_POSIX_ACL=y CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -813,6 +834,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -822,12 +844,12 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -877,13 +899,26 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -899,16 +934,19 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -947,6 +985,10 @@ CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -977,15 +1019,20 @@ CONFIG_CRYPTO_DES=y # CONFIG_CRYPTO_DEFLATE=y # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig index f3d4ca0caa46..b52be14074d8 100644 --- a/arch/sh/configs/se7721_defconfig +++ b/arch/sh/configs/se7721_defconfig @@ -1,24 +1,26 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc5 -# Fri Mar 21 12:05:31 2008 +# Linux kernel version: 2.6.27 +# Wed Oct 22 19:12:06 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -71,30 +73,38 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y # CONFIG_SHMEM is not set +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=1 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -109,6 +119,7 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type @@ -136,6 +147,7 @@ CONFIG_CPU_SUBTYPE_SH7721=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -165,7 +177,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -173,11 +187,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration @@ -211,7 +227,6 @@ CONFIG_SH_7721_SOLUTION_ENGINE=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=33333333 -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -247,6 +262,7 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set @@ -275,11 +291,9 @@ CONFIG_CF_BASE_ADDR=0xb8000000 # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -293,6 +307,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=y CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -330,8 +345,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -339,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -357,7 +371,7 @@ CONFIG_NET_SCH_CBQ=y CONFIG_NET_SCH_HTB=y CONFIG_NET_SCH_HFSC=y CONFIG_NET_SCH_PRIO=y -# CONFIG_NET_SCH_RR is not set +# CONFIG_NET_SCH_MULTIQ is not set CONFIG_NET_SCH_RED=y CONFIG_NET_SCH_SFQ=y CONFIG_NET_SCH_TEQL=y @@ -393,12 +407,11 @@ CONFIG_NET_SCH_FIFO=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set CONFIG_FIB_RULES=y - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -416,6 +429,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -426,6 +441,7 @@ CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -502,6 +518,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -546,13 +563,15 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +CONFIG_ATA_SFF=y # CONFIG_SATA_MV is not set CONFIG_PATA_PLATFORM=y # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -561,7 +580,6 @@ CONFIG_NETDEVICES=y # CONFIG_VETH is not set # CONFIG_NET_ETHERNET is not set CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set CONFIG_NETDEV_10000=y # @@ -569,6 +587,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -591,7 +610,7 @@ CONFIG_NETDEV_10000=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -620,6 +639,7 @@ CONFIG_INPUT_MOUSE=y # CONFIG_MOUSE_PS2 is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set # CONFIG_MOUSE_VSXXXAA is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -636,6 +656,7 @@ CONFIG_INPUT_MOUSE=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -659,12 +680,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -680,13 +696,26 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -701,10 +730,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -715,9 +740,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -733,11 +785,16 @@ CONFIG_USB=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -750,6 +807,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -771,6 +830,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -778,7 +838,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -791,7 +850,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -806,6 +865,8 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -822,12 +883,12 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_TIMER is not set # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -841,14 +902,14 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set @@ -879,6 +940,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -910,6 +972,7 @@ CONFIG_JFFS2_RTIME=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -971,6 +1034,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -981,6 +1045,7 @@ CONFIG_DEBUG_KERNEL=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -994,13 +1059,27 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -1016,55 +1095,96 @@ CONFIG_FRAME_POINTER=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # @@ -1073,6 +1193,7 @@ CONFIG_CRYPTO_HW=y CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig index 8e6a6baf5d27..e6df51f098f0 100644 --- a/arch/sh/configs/se7722_defconfig +++ b/arch/sh/configs/se7722_defconfig @@ -1,53 +1,56 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.22-rc4 -# Wed Jun 20 18:08:04 2007 +# Linux kernel version: 2.6.27 +# Wed Oct 22 19:15:10 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -61,6 +64,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -69,32 +73,41 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +# CONFIG_OPROFILE is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -108,6 +121,8 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type @@ -117,8 +132,10 @@ CONFIG_CPU_SH4A=y CONFIG_CPU_SH4AL_DSP=y CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -126,6 +143,8 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -134,14 +153,17 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set CONFIG_CPU_SUBTYPE_SH7722=y +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -151,6 +173,7 @@ CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y # CONFIG_X2TLB is not set CONFIG_VSYSCALL=y CONFIG_NUMA=y @@ -161,14 +184,18 @@ CONFIG_MAX_ACTIVE_REGIONS=2 CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_HUGETLB_PAGE_SIZE_64K=y # CONFIG_HUGETLB_PAGE_SIZE_256K is not set # CONFIG_HUGETLB_PAGE_SIZE_1MB is not set # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -181,34 +208,38 @@ CONFIG_SPARSEMEM_STATIC=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y # CONFIG_CPU_BIG_ENDIAN is not set -# CONFIG_SH_FPU is not set # CONFIG_SH_FPU_EMU is not set CONFIG_SH_DSP=y CONFIG_SH_STORE_QUEUES=y CONFIG_CPU_HAS_INTEVT=y -CONFIG_CPU_HAS_INTC_IRQ=y CONFIG_CPU_HAS_SR_RB=y CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_DSP=y # # Board support # CONFIG_SOLUTION_ENGINE=y CONFIG_SH_7722_SOLUTION_ENGINE=y +# CONFIG_SH_MIGOR is not set # # Timer and clock configuration @@ -219,6 +250,7 @@ CONFIG_SH_PCLK_FREQ=33333333 CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -248,19 +280,21 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_GUSA=y # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 -# CONFIG_UBC_WAKEUP is not set # CONFIG_CMDLINE_BOOL is not set # @@ -271,21 +305,15 @@ CONFIG_CF_ENABLER=y CONFIG_CF_AREA6=y CONFIG_CF_BASE_ADDR=0xb8000000 # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -298,6 +326,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -316,6 +345,7 @@ CONFIG_IP_FIB_HASH=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -323,8 +353,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -332,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -341,10 +370,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -352,18 +377,19 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -372,44 +398,29 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_BLINK is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -417,6 +428,7 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -446,40 +458,41 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set CONFIG_PATA_PLATFORM=y - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set CONFIG_SMC91X=y +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set CONFIG_NETDEV_1000=y CONFIG_NETDEV_10000=y @@ -488,22 +501,14 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -511,6 +516,7 @@ CONFIG_NETDEV_10000=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -520,7 +526,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -534,6 +539,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_SH_KEYSC is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -554,6 +560,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -572,119 +579,106 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set # CONFIG_SENSORS_SMSC47M1 is not set # CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -CONFIG_DAB=y +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +CONFIG_DAB=y # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set - -# -# HID Devices -# +CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set # -# USB support +# Special HID drivers # -# CONFIG_USB_ARCH_HAS_HCD is not set +CONFIG_HID_COMPAT=y +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -701,38 +695,30 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_TEST is not set # -# I2C RTC drivers -# - -# # SPI RTC drivers # # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -744,22 +730,20 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -783,12 +767,12 @@ CONFIG_DNOTIFY=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -803,14 +787,14 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_SMB_FS is not set @@ -818,42 +802,39 @@ CONFIG_RAMFS=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -CONFIG_PROFILING=y -# CONFIG_OPROFILE is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_PRINTK_TIME=y +CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_EARLY_PRINTK is not set @@ -864,11 +845,92 @@ CONFIG_SH_STANDARD_BIOS=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set # -# Cryptographic options +# Random Number Generation # -# CONFIG_CRYPTO is not set +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y # # Library routines @@ -876,8 +938,10 @@ CONFIG_SH_STANDARD_BIOS=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig index 167786f9a9bd..a577099c3247 100644 --- a/arch/sh/configs/se7750_defconfig +++ b/arch/sh/configs/se7750_defconfig @@ -1,48 +1,55 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20-rc2 -# Thu Dec 28 23:15:49 2006 +# Linux kernel version: 2.6.27 +# Wed Oct 22 19:17:29 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -54,33 +61,47 @@ CONFIG_KALLSYMS=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -94,68 +115,27 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type # -CONFIG_SOLUTION_ENGINE=y -CONFIG_SH_SOLUTION_ENGINE=y -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_7206_SOLUTION_ENGINE is not set -# CONFIG_SH_7619_SOLUTION_ENGINE is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set # CONFIG_CPU_SUBTYPE_SH7619 is not set - -# -# SH-2A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set CONFIG_CPU_SUBTYPE_SH7750=y # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -164,58 +144,61 @@ CONFIG_CPU_SUBTYPE_SH7750=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x02000000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set -CONFIG_CF_ENABLER=y -# CONFIG_CF_AREA5 is not set -CONFIG_CF_AREA6=y -CONFIG_CF_BASE_ADDR=0xb8000000 +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features @@ -223,19 +206,28 @@ CONFIG_CF_BASE_ADDR=0xb8000000 CONFIG_CPU_LITTLE_ENDIAN=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y -# CONFIG_SH_DSP is not set # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y -CONFIG_CPU_HAS_INTC_IRQ=y +CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y # -# Timer support +# Board support +# +CONFIG_SOLUTION_ENGINE=y +CONFIG_SH_SOLUTION_ENGINE=y + +# +# Timer and clock configuration # CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=33333333 +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -250,12 +242,11 @@ CONFIG_SH_PCLK_FREQ=33333333 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set -CONFIG_HEARTBEAT=y # # Additional SuperH Device Drivers # +CONFIG_HEARTBEAT=y # CONFIG_PUSH_SWITCH is not set # @@ -266,11 +257,15 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -283,43 +278,32 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # # Bus options # -# CONFIG_PCI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# - -# -# PCI Hotplug Support -# +CONFIG_CF_ENABLER=y +# CONFIG_CF_AREA5 is not set +CONFIG_CF_AREA6=y +CONFIG_CF_BASE_ADDR=0xb8000000 +# CONFIG_ARCH_SUPPORTS_MSI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -342,6 +326,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -349,27 +334,14 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -379,10 +351,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -390,9 +358,19 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -404,32 +382,27 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -455,7 +428,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set CONFIG_MTD_ROM=y # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -478,75 +450,53 @@ CONFIG_MTD_ROM=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -# CONFIG_IDEDISK_MULTI_MODE is not set +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -# CONFIG_IDE_GENERIC is not set -# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_PLATFORM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y # CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -568,6 +518,7 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -575,96 +526,52 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_AX88796 is not set CONFIG_STNIC=y # CONFIG_SMC91X is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -682,6 +589,7 @@ CONFIG_STNIC=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -704,15 +612,30 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -722,148 +645,92 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set CONFIG_SH_WDT=y # CONFIG_SH_WDT_MMAP is not set -CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set # -# TPM devices +# Sonics Silicon Backplane # -# CONFIG_TCG_TPM is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# I2C support +# Multifunction device drivers # -# CONFIG_I2C is not set +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support +# Multimedia devices # -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set # -# Multimedia devices +# Multimedia core support # # CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set +# CONFIG_DAB is not set # # Graphics support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Virtualization -# +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -887,12 +754,12 @@ CONFIG_DNOTIFY=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -908,31 +775,33 @@ CONFIG_RAMFS=y CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -940,7 +809,6 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -958,49 +826,126 @@ CONFIG_PARTITION_ADVANCED=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# +# CONFIG_SYSV68_PARTITION is not set # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_KGDB is not set +# CONFIG_SH_KGDB is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set # -# Cryptographic options +# Random Number Generation # -# CONFIG_CRYPTO is not set +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y # # Library routines @@ -1008,9 +953,14 @@ CONFIG_LOG_BUF_SHIFT=14 CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y -CONFIG_IOMAP_COPY=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/se7751_defconfig b/arch/sh/configs/se7751_defconfig index a9095593f8f3..d99a6bdf410f 100644 --- a/arch/sh/configs/se7751_defconfig +++ b/arch/sh/configs/se7751_defconfig @@ -1,40 +1,54 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 12:10:12 2006 +# Linux kernel version: 2.6.27 +# Wed Oct 22 19:21:12 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -47,33 +61,47 @@ CONFIG_KALLSYMS=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set - -# -# Block layer -# +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -87,60 +115,27 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type # -CONFIG_SOLUTION_ENGINE=y -# CONFIG_SH_SOLUTION_ENGINE is not set -CONFIG_SH_7751_SOLUTION_ENGINE=y -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -149,65 +144,91 @@ CONFIG_CPU_SUBTYPE_SH7751=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y -# CONFIG_SH_DSP is not set # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y # -# Timer support +# Board support +# +CONFIG_SOLUTION_ENGINE=y +CONFIG_SH_7751_SOLUTION_ENGINE=y +# CONFIG_SH_SH03 is not set + +# +# Timer and clock configuration # CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=60000000 +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -222,21 +243,30 @@ CONFIG_SH_PCLK_FREQ=60000000 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set + +# +# Additional SuperH Device Drivers +# CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set # # Kernel features # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -250,43 +280,29 @@ CONFIG_CMDLINE="console=ttySC1,38400" # # Bus options # -# CONFIG_PCI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# - -# -# PCI Hotplug Support -# +# CONFIG_CF_ENABLER is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y @@ -308,52 +324,42 @@ CONFIG_IP_PNP_RARP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y CONFIG_NETFILTER_DEBUG=y +CONFIG_NETFILTER_ADVANCED=y # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set +# CONFIG_NETFILTER_NETLINK_QUEUE is not set +# CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # -# CONFIG_IP_NF_CONNTRACK is not set +# CONFIG_NF_DEFRAG_IPV4 is not set CONFIG_IP_NF_QUEUE=y - -# -# DCCP Configuration (EXPERIMENTAL) -# +# CONFIG_IP_NF_IPTABLES is not set +# CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -363,10 +369,6 @@ CONFIG_IP_NF_QUEUE=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -374,9 +376,19 @@ CONFIG_IP_NF_QUEUE=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -388,32 +400,27 @@ CONFIG_IP_NF_QUEUE=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # # CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -439,7 +446,6 @@ CONFIG_MTD_CFI_UTIL=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -462,43 +468,29 @@ CONFIG_MTD_RAM=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -506,89 +498,48 @@ CONFIG_BLK_DEV_INITRD=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set # CONFIG_SMC91X is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -606,6 +557,7 @@ CONFIG_MII=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -620,150 +572,107 @@ CONFIG_MII=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -CONFIG_WATCHDOG=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -# CONFIG_SOFT_WATCHDOG is not set -# CONFIG_SH_WDT is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# # CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set # -# SPI support +# Watchdog Device Drivers # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +# CONFIG_SOFT_WATCHDOG is not set +# CONFIG_SH_WDT is not set # -# Dallas's 1-wire bus +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Hardware Monitoring support +# Multifunction device drivers # -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # -# Misc devices +# Multimedia devices # # -# Multimedia devices +# Multimedia core support # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set +# CONFIG_DAB is not set # # Graphics support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -772,17 +681,17 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -806,12 +715,12 @@ CONFIG_DNOTIFY=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -824,26 +733,27 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set # CONFIG_JFFS2_SUMMARY is not set # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_SMB_FS is not set @@ -851,57 +761,146 @@ CONFIG_JFFS2_RTIME=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set +# CONFIG_DLM is not set # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_KGDB is not set +# CONFIG_SH_KGDB is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set # -# Cryptographic options +# Random Number Generation # -# CONFIG_CRYPTO is not set +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig index 30f5ee40c312..ad95b80bb198 100644 --- a/arch/sh/configs/se7780_defconfig +++ b/arch/sh/configs/se7780_defconfig @@ -1,26 +1,28 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc3 -# Thu Feb 28 10:18:04 2008 +# Linux kernel version: 2.6.27 +# Wed Oct 22 19:27:30 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -41,11 +43,8 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set @@ -68,20 +67,27 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_KPROBES is not set -CONFIG_PROC_PAGE_MONITOR=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set @@ -90,6 +96,7 @@ CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -104,7 +111,7 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set +# CONFIG_FREEZER is not set # # System type @@ -115,6 +122,7 @@ CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -132,6 +140,7 @@ CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set CONFIG_CPU_SUBTYPE_SH7780=y @@ -152,7 +161,6 @@ CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 CONFIG_29BIT=y -# CONFIG_PMB is not set CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y @@ -161,9 +169,12 @@ CONFIG_MAX_ACTIVE_REGIONS=1 CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -171,11 +182,14 @@ CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration @@ -210,7 +224,6 @@ CONFIG_SH_7780_SOLUTION_ENGINE=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=28 CONFIG_SH_PCLK_FREQ=33333333 -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -244,10 +257,10 @@ CONFIG_HZ_250=y # CONFIG_HZ_1000 is not set CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set +# CONFIG_SECCOMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_GUSA=y # @@ -273,11 +286,9 @@ CONFIG_PCI_LEGACY=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -347,11 +358,10 @@ CONFIG_IPV6=y # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -374,6 +384,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -461,11 +472,13 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -537,9 +550,13 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_NV is not set @@ -547,11 +564,11 @@ CONFIG_ATA=y # CONFIG_SATA_QSTOR is not set # CONFIG_SATA_PROMISE is not set CONFIG_SATA_SIL=y -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set @@ -575,6 +592,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -583,12 +601,11 @@ CONFIG_SATA_SIL=y # # -# An alternative FireWire stack is available with EXPERIMENTAL=y +# A new alternative FireWire stack is available with EXPERIMENTAL=y # # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set @@ -621,12 +638,16 @@ CONFIG_MII=y # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set CONFIG_SMC91X=y +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -645,6 +666,7 @@ CONFIG_NET_PCI=y # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -654,6 +676,7 @@ CONFIG_NET_PCI=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -675,7 +698,7 @@ CONFIG_NET_PCI=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -709,9 +732,11 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -737,12 +762,7 @@ CONFIG_UNIX98_PTYS=y # CONFIG_RAW_DRIVER is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -757,6 +777,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set # @@ -768,13 +789,26 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -786,15 +820,16 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +CONFIG_FB_CFB_FILLRECT=m +CONFIG_FB_CFB_COPYAREA=m +CONFIG_FB_CFB_IMAGEBLIT=m # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -818,6 +853,7 @@ CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_ATY is not set # CONFIG_FB_S3 is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -825,7 +861,10 @@ CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_VT8623 is not set # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_SH_MOBILE_LCDC=m # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -850,24 +889,10 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_LOGO_SUPERH_MONO is not set # CONFIG_LOGO_SUPERH_VGA16 is not set CONFIG_LOGO_SUPERH_CLUT224=y - -# -# Sound -# CONFIG_SOUND=y - -# -# Advanced Linux Sound Architecture -# +CONFIG_SOUND_OSS_CORE=y # CONFIG_SND is not set - -# -# Open Sound System -# CONFIG_SOUND_PRIME=y -# CONFIG_SOUND_TRIDENT is not set -# CONFIG_SOUND_MSNDCLAS is not set -# CONFIG_SOUND_MSNDPIN is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set @@ -877,8 +902,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -892,11 +945,17 @@ CONFIG_USB=y # CONFIG_USB_DEVICEFS=y # CONFIG_USB_DEVICE_CLASS is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_ISP116X_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set @@ -911,6 +970,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -921,17 +982,25 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set +# CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set +# CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # # USB Imaging devices # +# CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -943,6 +1012,10 @@ CONFIG_USB_MON=y # # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set @@ -956,17 +1029,19 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -975,9 +1050,11 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set @@ -1010,6 +1087,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1025,6 +1103,7 @@ CONFIG_TMPFS=y CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1034,9 +1113,8 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y @@ -1099,12 +1177,20 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -1115,45 +1201,86 @@ CONFIG_DEBUG_FS=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set -# CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_PCBC is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set @@ -1163,6 +1290,7 @@ CONFIG_CRYPTO_HW=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig index 9fd5ea7304e5..95f0f5d5b631 100644 --- a/arch/sh/configs/sh03_defconfig +++ b/arch/sh/configs/sh03_defconfig @@ -1,41 +1,56 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 12:13:26 2006 +# Linux kernel version: 2.6.27 +# Wed Oct 22 19:31:54 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -48,34 +63,49 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -89,59 +119,27 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -CONFIG_SH_SH03=y -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -150,69 +148,90 @@ CONFIG_CPU_SUBTYPE_SH7751=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x08000000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set -CONFIG_CF_ENABLER=y -CONFIG_CF_AREA5=y -# CONFIG_CF_AREA6 is not set -CONFIG_CF_BASE_ADDR=0xb4000000 +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y -# CONFIG_SH_DSP is not set # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y # -# Timer support +# Board support +# +# CONFIG_SH_7751_SOLUTION_ENGINE is not set +CONFIG_SH_SH03=y + +# +# Timer and clock configuration # CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=60000000 +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -227,22 +246,31 @@ CONFIG_SH_PCLK_FREQ=60000000 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set + +# +# Additional SuperH Device Drivers +# CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set # # Kernel features # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -256,20 +284,17 @@ CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs" # # Bus options # +CONFIG_CF_ENABLER=y +CONFIG_CF_AREA5=y +# CONFIG_CF_AREA6 is not set +CONFIG_CF_BASE_ADDR=0xb4000000 CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# CONFIG_HOTPLUG_PCI=m # CONFIG_HOTPLUG_PCI_FAKE is not set # CONFIG_HOTPLUG_PCI_CPCI is not set @@ -279,30 +304,24 @@ CONFIG_HOTPLUG_PCI=m # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y - -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set @@ -323,33 +342,23 @@ CONFIG_IP_PNP_RARP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -359,10 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -370,9 +375,19 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -381,34 +396,15 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set # CONFIG_FW_LOADER is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set @@ -420,45 +416,76 @@ CONFIG_BLK_DEV_NBD=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y +CONFIG_IDE_GD=y +CONFIG_IDE_GD_ATA=y +# CONFIG_IDE_GD_ATAPI is not set CONFIG_BLK_DEV_IDECD=m +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y CONFIG_BLK_DEV_IDETAPE=m -CONFIG_BLK_DEV_IDEFLOPPY=m # CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_IDEPCI is not set -# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_PLATFORM is not set + +# +# PCI IDE chipsets support +# +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set -# CONFIG_BLK_DEV_HD is not set # # SCSI device support # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=m +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -479,6 +506,8 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -486,12 +515,9 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set @@ -501,7 +527,6 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -512,88 +537,67 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_IPR is not set # CONFIG_SCSI_QLOGIC_1280 is not set # CONFIG_SCSI_QLA_FC is not set +# CONFIG_SCSI_QLA_ISCSI is not set # CONFIG_SCSI_LPFC is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # -# I2O device support +# Enable only one of the two stacks, unless you know what you are doing # +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# +# CONFIG_VETH is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set - -# -# Tulip family network device support -# +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -601,18 +605,21 @@ CONFIG_NET_PCI=y # CONFIG_NE2K_PCI is not set CONFIG_8139CP=y # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# +# CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -620,52 +627,46 @@ CONFIG_8139CP=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set - -# -# Ethernet (10000 Mbit) -# +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_JME is not set +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set - -# -# Token Ring devices -# +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -673,6 +674,7 @@ CONFIG_8139CP=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -682,7 +684,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -692,6 +693,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -705,10 +707,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -731,15 +736,36 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -747,6 +773,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ALIM7101_WDT is not set CONFIG_SH_WDT=m # CONFIG_SH_WDT_MMAP is not set @@ -755,142 +782,92 @@ CONFIG_SH_WDT=m # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set -CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# Ftape, the floppy tape device driver -# -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set # -# TPM devices +# Sonics Silicon Backplane # -# CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# I2C support -# -# CONFIG_I2C is not set - +# Multifunction device drivers # -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # -# Misc devices +# Multimedia devices # # -# Multimedia devices +# Multimedia core support # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set +# CONFIG_DAB is not set # # Graphics support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Console display driver support +# Display device support # -CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DISPLAY_SUPPORT is not set # -# Sound +# Console display driver support # +CONFIG_DUMMY_CONSOLE=y # CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set # -# USB support +# Special HID drivers # +CONFIG_HID_COMPAT=y +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -904,20 +881,19 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y CONFIG_AUTOFS_FS=y CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -928,7 +904,6 @@ CONFIG_AUTOFS4_FS=y CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=m CONFIG_UDF_FS=m CONFIG_UDF_NLS=y @@ -948,12 +923,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -968,31 +943,30 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1000,7 +974,6 @@ CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -1022,10 +995,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# +# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m @@ -1066,81 +1036,146 @@ CONFIG_NLS_ISO8859_15=m CONFIG_NLS_KOI8_R=m CONFIG_NLS_KOI8_U=m CONFIG_NLS_UTF8=m - -# -# Profiling support -# -CONFIG_PROFILING=y -CONFIG_OPROFILE=m +# CONFIG_DLM is not set # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_EARLY_PRINTK is not set -# CONFIG_KGDB is not set +# CONFIG_SH_KGDB is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y # -# Cryptographic options +# Crypto core or helper # -CONFIG_CRYPTO=y +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=m -CONFIG_CRYPTO_HMAC=y +CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_LZO is not set # -# Hardware crypto devices +# Random Number Generation # +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig index 37e49a589207..9a768b28adcb 100644 --- a/arch/sh/configs/sh7710voipgw_defconfig +++ b/arch/sh/configs/sh7710voipgw_defconfig @@ -1,25 +1,27 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc4 -# Thu Mar 6 16:02:29 2008 +# Linux kernel version: 2.6.27 +# Wed Oct 22 19:35:18 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -70,30 +72,38 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y # CONFIG_SHMEM is not set +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -108,7 +118,7 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set +# CONFIG_FREEZER is not set # # System type @@ -118,6 +128,7 @@ CONFIG_CPU_SH3=y # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -135,6 +146,7 @@ CONFIG_CPU_SUBTYPE_SH7710=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -164,7 +176,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -172,11 +186,13 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration @@ -209,7 +225,6 @@ CONFIG_CPU_HAS_DSP=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=32768000 -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -245,10 +260,10 @@ CONFIG_HZ=250 # CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_GUSA=y # CONFIG_GUSA_RB is not set @@ -269,11 +284,9 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -311,10 +324,7 @@ CONFIG_INET_XFRM_MODE_BEET=y CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set -# CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -327,10 +337,12 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_NETFILTER_NETLINK_LOG is not set # CONFIG_NF_CONNTRACK is not set # CONFIG_NETFILTER_XTABLES is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # +# CONFIG_NF_DEFRAG_IPV4 is not set # CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set @@ -339,6 +351,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -357,7 +370,7 @@ CONFIG_NET_SCH_CBQ=y # CONFIG_NET_SCH_HTB is not set # CONFIG_NET_SCH_HFSC is not set # CONFIG_NET_SCH_PRIO is not set -# CONFIG_NET_SCH_RR is not set +# CONFIG_NET_SCH_MULTIQ is not set # CONFIG_NET_SCH_RED is not set # CONFIG_NET_SCH_SFQ is not set # CONFIG_NET_SCH_TEQL is not set @@ -395,11 +408,10 @@ CONFIG_NET_SCH_FIFO=y # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -417,6 +429,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set CONFIG_MTD=y @@ -425,6 +439,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -500,6 +515,7 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_RAM is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set @@ -516,7 +532,6 @@ CONFIG_HAVE_IDE=y # CONFIG_ATA is not set # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -528,14 +543,18 @@ CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_AX88796 is not set # CONFIG_STNIC is not set +# CONFIG_SH_ETH is not set # CONFIG_SMC91X is not set +# CONFIG_SMC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y -# CONFIG_E1000E_ENABLED is not set CONFIG_NETDEV_10000=y # @@ -543,6 +562,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -587,6 +607,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -611,12 +632,7 @@ CONFIG_HW_RANDOM=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -632,13 +648,26 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -653,20 +682,28 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# Enable Host or Gadget support to see Inventra options +# # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -675,24 +712,23 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set @@ -720,6 +756,7 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -751,6 +788,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -780,12 +818,19 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -796,51 +841,91 @@ CONFIG_DEBUG_FS=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # @@ -849,6 +934,7 @@ CONFIG_CRYPTO_HW=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig index baf830c4a7e4..6a77f691fb87 100644 --- a/arch/sh/configs/sh7763rdp_defconfig +++ b/arch/sh/configs/sh7763rdp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc2 -# Fri Aug 8 13:44:20 2008 +# Linux kernel version: 2.6.27 +# Wed Oct 22 19:37:12 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -13,11 +13,12 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y @@ -76,7 +77,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -84,15 +87,12 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y -CONFIG_PROC_PAGE_MONITOR=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -124,6 +124,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type @@ -181,6 +182,7 @@ CONFIG_MAX_ACTIVE_REGIONS=1 CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set @@ -193,13 +195,15 @@ CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set # CONFIG_MEMORY_HOTPLUG is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration @@ -231,7 +235,6 @@ CONFIG_SH_SH7763RDP=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=28 CONFIG_SH_PCLK_FREQ=66666666 -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -291,6 +294,8 @@ CONFIG_CMDLINE="console=ttySC2,115200 root=/dev/sda1 rootdelay=10" # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_NET=y @@ -341,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -361,11 +367,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set @@ -563,6 +568,9 @@ CONFIG_SH_ETH=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set # CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -675,6 +683,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices @@ -700,6 +710,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -725,6 +736,7 @@ CONFIG_FB_BOTH_ENDIAN=y # CONFIG_FB_SH_MOBILE_LCDC is not set CONFIG_FB_SH7760=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -768,6 +780,7 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -788,6 +801,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -817,7 +831,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -830,7 +843,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -846,13 +859,14 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # -# MMC/SD Card Drivers +# MMC/SD/SDIO Card Drivers # CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_BOUNCE=y @@ -860,7 +874,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_TEST is not set # -# MMC/SD Host Controller Drivers +# MMC/SD/SDIO Host Controller Drivers # # CONFIG_MMC_SDHCI is not set # CONFIG_MEMSTICK is not set @@ -869,6 +883,7 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -880,12 +895,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -919,6 +935,7 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y @@ -955,6 +972,7 @@ CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1025,6 +1043,11 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -1035,12 +1058,14 @@ CONFIG_FRAME_WARN=1024 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1113,13 +1138,17 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig index ff72697365d1..07e33c285b93 100644 --- a/arch/sh/configs/sh7785lcr_defconfig +++ b/arch/sh/configs/sh7785lcr_defconfig @@ -1,27 +1,29 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc8 -# Tue Jul 15 21:37:59 2008 +# Linux kernel version: 2.6.27 +# Wed Oct 22 19:49:23 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y -CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_IO_TRAPPED=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -61,7 +63,6 @@ CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -78,7 +79,9 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set @@ -86,10 +89,13 @@ CONFIG_PROFILING=y # CONFIG_MARKERS is not set # CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set @@ -106,6 +112,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -120,6 +127,7 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type @@ -181,10 +189,12 @@ CONFIG_MAX_ACTIVE_REGIONS=2 CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -192,13 +202,15 @@ CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set # CONFIG_MEMORY_HOTPLUG is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration @@ -266,9 +278,10 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 -# CONFIG_SCHED_HRTICK is not set +CONFIG_SCHED_HRTICK=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y @@ -299,11 +312,9 @@ CONFIG_PCI_LEGACY=y # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -358,6 +369,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -378,12 +390,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set @@ -499,6 +511,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -541,6 +554,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -615,7 +629,6 @@ CONFIG_SATA_SIL=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -624,19 +637,18 @@ CONFIG_NETDEVICES=y # CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_NET_ETHERNET is not set +CONFIG_MII=y CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set CONFIG_R8169=y -# CONFIG_R8169_NAPI is not set # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set @@ -645,6 +657,8 @@ CONFIG_R8169=y # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -679,7 +693,7 @@ CONFIG_R8169=y # Input device support # CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set +CONFIG_INPUT_FF_MEMLESS=m # CONFIG_INPUT_POLLDEV is not set # @@ -720,6 +734,7 @@ CONFIG_INPUT_KEYBOARD=y # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y @@ -754,44 +769,65 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_ALGOPCA=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SH_MOBILE is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# CONFIG_I2C_PCA_PLATFORM=y -# CONFIG_I2C_SH_MOBILE is not set +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set +# CONFIG_AT24 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set @@ -816,8 +852,12 @@ CONFIG_SSB_POSSIBLE=y # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=y # CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set # # Multimedia devices @@ -844,6 +884,7 @@ CONFIG_MFD_SM501=y CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y @@ -877,6 +918,7 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_S3 is not set # CONFIG_FB_SAVAGE is not set # CONFIG_FB_SIS is not set +# CONFIG_FB_VIA is not set # CONFIG_FB_NEOMAGIC is not set # CONFIG_FB_KYRO is not set # CONFIG_FB_3DFX is not set @@ -885,8 +927,11 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_TRIDENT is not set # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set +# CONFIG_FB_CARMINE is not set +CONFIG_FB_SH_MOBILE_LCDC=m CONFIG_FB_SM501=y # CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -911,10 +956,6 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_LOGO_SUPERH_MONO is not set # CONFIG_LOGO_SUPERH_VGA16 is not set # CONFIG_LOGO_SUPERH_CLUT224 is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -925,9 +966,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +CONFIG_HID_COMPAT=y +CONFIG_HID_A4TECH=y +CONFIG_HID_APPLE=y +CONFIG_HID_BELKIN=y +CONFIG_HID_BRIGHT=y +CONFIG_HID_CHERRY=y +CONFIG_HID_CHICONY=y +CONFIG_HID_CYPRESS=y +CONFIG_HID_DELL=y +CONFIG_HID_EZKEY=y +CONFIG_HID_GYRATION=y +CONFIG_HID_LOGITECH=y +# CONFIG_LOGITECH_FF is not set +# CONFIG_LOGIRUMBLEPAD2_FF is not set +CONFIG_HID_MICROSOFT=y +CONFIG_HID_MONTEREY=y +CONFIG_HID_PANTHERLORD=y +# CONFIG_PANTHERLORD_FF is not set +CONFIG_HID_PETALYNX=y +CONFIG_HID_SAMSUNG=y +CONFIG_HID_SONY=y +CONFIG_HID_SUNPLUS=y +CONFIG_THRUSTMASTER_FF=m +CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -945,6 +1013,7 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers @@ -969,6 +1038,7 @@ CONFIG_USB_R8A66597_HCD=y # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -998,7 +1068,6 @@ CONFIG_USB_STORAGE=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -CONFIG_USB_MON=y # # USB port drivers @@ -1011,7 +1080,7 @@ CONFIG_USB_MON=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1029,6 +1098,7 @@ CONFIG_USB_MON=y # CONFIG_USB_IOWARRIOR is not set CONFIG_USB_TEST=m # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1073,19 +1143,24 @@ CONFIG_RTC_DRV_RS5C372=y # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # # CONFIG_RTC_DRV_SH is not set +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1097,12 +1172,13 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y @@ -1137,6 +1213,7 @@ CONFIG_NTFS_RW=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set @@ -1158,6 +1235,7 @@ CONFIG_TMPFS=y # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=y +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set @@ -1168,18 +1246,18 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y -# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_SUNRPC_REGISTER_V4 is not set CONFIG_RPCSEC_GSS_KRB5=y # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1250,6 +1328,8 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1270,13 +1350,27 @@ CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_FRAME_POINTER is not set -# CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set @@ -1292,15 +1386,19 @@ CONFIG_DEBUG_PREEMPT=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set @@ -1339,6 +1437,10 @@ CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1369,15 +1471,20 @@ CONFIG_CRYPTO_DES=y # # CONFIG_CRYPTO_DEFLATE is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig index 8800fefcbaf0..e2b38a334976 100644 --- a/arch/sh/configs/shmin_defconfig +++ b/arch/sh/configs/shmin_defconfig @@ -1,27 +1,34 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 12:52:49 2006 +# Linux kernel version: 2.6.27 +# Wed Oct 22 19:52:59 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set @@ -29,11 +36,14 @@ CONFIG_LOCALVERSION_AUTO=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" +# CONFIG_NAMESPACES is not set +# CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y @@ -44,27 +54,38 @@ CONFIG_EMBEDDED=y CONFIG_PRINTK=y # CONFIG_BUG is not set # CONFIG_ELF_CORE is not set +CONFIG_COMPAT_BRK=y # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set +CONFIG_ANON_INODES=y # CONFIG_EPOLL is not set +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y # CONFIG_SHMEM is not set -# CONFIG_SLAB is not set +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +# CONFIG_SLAB is not set +# CONFIG_SLUB is not set +CONFIG_SLOB=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=1 -CONFIG_SLOB=y - -# -# Loadable module support -# # CONFIG_MODULES is not set - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -78,59 +99,27 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -CONFIG_SH_SHMIN=y -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH3=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set CONFIG_CPU_SUBTYPE_SH7706=y # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -139,65 +128,87 @@ CONFIG_CPU_SUBTYPE_SH7706=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x00800000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set # CONFIG_SH_FPU_EMU is not set -# CONFIG_SH_DSP is not set # CONFIG_SH_ADC is not set CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y # -# Timer support +# Board support +# +CONFIG_SH_SHMIN=y + +# +# Timer and clock configuration # CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=32000000 +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -212,69 +223,63 @@ CONFIG_SH_PCLK_FREQ=32000000 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set + +# +# Additional SuperH Device Drivers +# +# CONFIG_HEARTBEAT is not set +# CONFIG_PUSH_SWITCH is not set # # Kernel features # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00210000 -# CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC1,115200 root=1f01 mtdparts=phys_mapped_flash:64k(firm)ro,-(sys) netdev=34,0x300,eth0 " # # Bus options # -# CONFIG_PCI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# - -# -# PCI Hotplug Support -# +# CONFIG_ARCH_SUPPORTS_MSI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set # CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -295,33 +300,23 @@ CONFIG_IP_PNP=y # CONFIG_INET_TUNNEL is not set CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -331,10 +326,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -342,9 +333,19 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -356,32 +357,27 @@ CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers # # CONFIG_MTD_CHAR is not set +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -407,7 +403,6 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -433,41 +428,27 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -475,89 +456,48 @@ CONFIG_BLK_DEV_LOOP=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set # CONFIG_SMC91X is not set - -# -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -575,6 +515,7 @@ CONFIG_NET_ETHERNET=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -593,153 +534,103 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set # -# Dallas's 1-wire bus +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # -# Misc devices +# Multimedia devices # # -# Multimedia devices +# Multimedia core support # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # -# CONFIG_DVB is not set +# CONFIG_DAB is not set # # Graphics support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -763,12 +654,12 @@ CONFIG_FIRMWARE_EDID=y CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y # CONFIG_SYSFS is not set CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # # Miscellaneous filesystems @@ -780,29 +671,28 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -810,53 +700,140 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_UNWIND_INFO is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set CONFIG_SH_STANDARD_BIOS=y +# CONFIG_EARLY_SCIF_CONSOLE is not set CONFIG_EARLY_PRINTK=y -# CONFIG_KGDB is not set +# CONFIG_SH_KGDB is not set # # Security options # # CONFIG_KEYS is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set # -# Cryptographic options +# Random Number Generation # -# CONFIG_CRYPTO is not set +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig index a794c082709b..ae5cbe237fff 100644 --- a/arch/sh/configs/shx3_defconfig +++ b/arch/sh/configs/shx3_defconfig @@ -1,18 +1,23 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc7 -# Fri Sep 21 19:07:30 2007 +# Linux kernel version: 2.6.27 +# Tue Oct 21 12:16:25 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y +CONFIG_GENERIC_LOCKBREAK=y CONFIG_SYS_SUPPORTS_SMP=y CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_STACKTRACE_SUPPORT=y @@ -26,7 +31,6 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # General setup # CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" @@ -34,20 +38,41 @@ CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set +CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y # CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_AUDIT is not set +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y +CONFIG_AUDIT_TREE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_SYSFS_DEPRECATED is not set -# CONFIG_RELAY is not set -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_CGROUP_NS=y +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +# CONFIG_CPUSETS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_MM_OWNER=y +CONFIG_CGROUP_MEM_RES_CTLR=y +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_UID16=y @@ -59,44 +84,66 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y # CONFIG_SLAB is not set # CONFIG_SLUB is not set CONFIG_SLOB=y +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_KRETPROBES=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_USE_GENERIC_SMP_HELPERS=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y +CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers # CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_DEADLINE is not set # CONFIG_DEFAULT_CFQ is not set -CONFIG_DEFAULT_NOOP=y -CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_CLASSIC_RCU is not set +CONFIG_FREEZER=y # # System type @@ -105,7 +152,10 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SH4A=y CONFIG_CPU_SHX3=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -114,6 +164,7 @@ CONFIG_CPU_SHX3=y # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set # CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -122,14 +173,17 @@ CONFIG_CPU_SHX3=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set CONFIG_CPU_SUBTYPE_SHX3=y # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -139,45 +193,56 @@ CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y +# CONFIG_X2TLB is not set CONFIG_VSYSCALL=y -# CONFIG_NUMA is not set -CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_NUMA=y +CONFIG_NODES_SHIFT=3 CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_MAX_ACTIVE_REGIONS=6 CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_MEMORY_PROBE=y -CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_4KB is not set # CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_HUGETLB_PAGE_SIZE_64K=y +# CONFIG_PAGE_SIZE_16KB is not set +CONFIG_PAGE_SIZE_64KB=y +CONFIG_ENTRY_OFFSET=0x00010000 +# CONFIG_HUGETLB_PAGE_SIZE_64K is not set # CONFIG_HUGETLB_PAGE_SIZE_256K is not set -# CONFIG_HUGETLB_PAGE_SIZE_1MB is not set +CONFIG_HUGETLB_PAGE_SIZE_1MB=y # CONFIG_HUGETLB_PAGE_SIZE_4MB is not set # CONFIG_HUGETLB_PAGE_SIZE_64MB is not set +# CONFIG_HUGETLB_PAGE_SIZE_512MB is not set CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set CONFIG_SPARSEMEM_MANUAL=y CONFIG_SPARSEMEM=y +CONFIG_NEED_MULTIPLE_NODES=y CONFIG_HAVE_MEMORY_PRESENT=y CONFIG_SPARSEMEM_STATIC=y CONFIG_MEMORY_HOTPLUG=y CONFIG_MEMORY_HOTPLUG_SPARSE=y +CONFIG_MEMORY_HOTREMOVE=y CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_MIGRATION=y # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_CACHE_WRITEBACK is not set +CONFIG_CACHE_WRITEBACK=y # CONFIG_CACHE_WRITETHROUGH is not set -CONFIG_CACHE_OFF=y +# CONFIG_CACHE_OFF is not set # # Processor features @@ -202,8 +267,9 @@ CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=50000000 CONFIG_TICK_ONESHOT=y -# CONFIG_NO_HZ is not set +CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -214,7 +280,10 @@ CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=m CONFIG_CPU_FREQ_GOV_USERSPACE=m @@ -245,20 +314,23 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +CONFIG_SCHED_HRTICK=y CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set -# CONFIG_SMP is not set +CONFIG_SECCOMP=y +CONFIG_SMP=y +CONFIG_NR_CPUS=4 # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y +CONFIG_PREEMPT_RCU=y +CONFIG_RCU_TRACE=y # # Boot options # CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 -# CONFIG_UBC_WAKEUP is not set CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel" @@ -266,21 +338,15 @@ CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=bios ignore_loglevel" # Bus options # # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y - -# -# Networking -# CONFIG_NET=y # @@ -292,6 +358,7 @@ CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set # CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set @@ -313,6 +380,7 @@ CONFIG_INET_TUNNEL=m CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -334,8 +402,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -343,6 +413,7 @@ CONFIG_IPV6_SIT=m # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -352,28 +423,28 @@ CONFIG_IPV6_SIT=m # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set +# CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set +CONFIG_CAN=m +CONFIG_CAN_RAW=m +CONFIG_CAN_BCM=m # -# Wireless +# CAN Device Drivers # -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +CONFIG_CAN_VCAN=m +# CONFIG_CAN_DEBUG_DEVICES is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +# CONFIG_WIRELESS is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -384,6 +455,7 @@ CONFIG_IPV6_SIT=m # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_FW_LOADER is not set @@ -397,14 +469,18 @@ CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -443,25 +519,41 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_SCSI_DEBUG is not set +# CONFIG_SCSI_DH is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set CONFIG_PATA_PLATFORM=y # CONFIG_MD is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set CONFIG_SMC91X=y +# CONFIG_ENC28J60 is not set +# CONFIG_SMC911X is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set +# CONFIG_B44 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set @@ -470,10 +562,19 @@ CONFIG_SMC91X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -495,6 +596,7 @@ CONFIG_SMC91X=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -514,6 +616,76 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SH_MOBILE is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_SH_SCI is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -522,78 +694,158 @@ CONFIG_WATCHDOG=y # # CONFIG_SOFT_WATCHDOG is not set # CONFIG_SH_WDT is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set # -# SPI support +# USB-based Watchdog Cards # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set +# CONFIG_USBPCWATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set + +# +# Miscellaneous USB options +# +# CONFIG_USB_DEVICEFS is not set +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y + +# +# USB Host Controller Drivers +# +# CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set +# CONFIG_USB_SL811_HCD is not set +CONFIG_USB_R8A66597_HCD=m +# CONFIG_USB_GADGET_MUSB_HDRC is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # -# USB Gadget Support +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + # +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set +# CONFIG_USB_GADGET_DEBUG_FS is not set +CONFIG_USB_GADGET_VBUS_DRAW=2 CONFIG_USB_GADGET_SELECTED=y -# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_AT91 is not set +# CONFIG_USB_GADGET_ATMEL_USBA is not set # CONFIG_USB_GADGET_FSL_USB2 is not set -# CONFIG_USB_GADGET_NET2280 is not set -# CONFIG_USB_GADGET_PXA2XX is not set -CONFIG_USB_GADGET_M66592=y -CONFIG_USB_M66592=y -# CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set +# CONFIG_USB_GADGET_PXA25X is not set +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C2410 is not set -# CONFIG_USB_GADGET_AT91 is not set +CONFIG_USB_GADGET_M66592=y +CONFIG_USB_M66592=y +# CONFIG_USB_GADGET_AMD5536UDC is not set +# CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_NET2280 is not set +# CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set @@ -602,27 +854,78 @@ CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set +# CONFIG_USB_CDC_COMPOSITE is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set -# CONFIG_RTC_CLASS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients -# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # -# DMA Devices +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + # +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Userspace I/O +# on-CPU RTC drivers # +CONFIG_RTC_DRV_SH=y +# CONFIG_DMADEVICES is not set CONFIG_UIO=m +# CONFIG_UIO_PDRV is not set +# CONFIG_UIO_PDRV_GENIRQ is not set +# CONFIG_UIO_SMX is not set +# CONFIG_UIO_SERCOS3 is not set +# CONFIG_STAGING is not set # # File systems @@ -634,22 +937,20 @@ CONFIG_EXT3_FS=y CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_POSIX_ACL is not set # CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y # CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -673,12 +974,12 @@ CONFIG_DNOTIFY=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -693,14 +994,14 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_SMB_FS is not set @@ -714,29 +1015,17 @@ CONFIG_RAMFS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -CONFIG_PROFILING=y -# CONFIG_OPROFILE is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -744,9 +1033,12 @@ CONFIG_DEBUG_FS=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -761,18 +1053,36 @@ CONFIG_DEBUG_PREEMPT=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set CONFIG_DEBUG_VM=y +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SYSCTL_SYSCALL_CHECK is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set CONFIG_EARLY_PRINTK=y # CONFIG_DEBUG_BOOTMEM is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y -# CONFIG_4KSTACKS is not set +# CONFIG_IRQSTACKS is not set # CONFIG_SH_KGDB is not set # @@ -780,7 +1090,92 @@ CONFIG_DEBUG_STACK_USAGE=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set -# CONFIG_CRYPTO is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +# CONFIG_CRYPTO_FIPS is not set +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y # # Library routines @@ -788,10 +1183,12 @@ CONFIG_DEBUG_STACK_USAGE=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_AUDIT_GENERIC=y CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y diff --git a/arch/sh/configs/snapgear_defconfig b/arch/sh/configs/snapgear_defconfig index e4e5d2178131..b4ca5110958f 100644 --- a/arch/sh/configs/snapgear_defconfig +++ b/arch/sh/configs/snapgear_defconfig @@ -1,36 +1,36 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc1 -# Thu Jul 26 11:49:11 2007 +# Linux kernel version: 2.6.27 +# Wed Oct 22 19:55:03 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set @@ -38,12 +38,15 @@ CONFIG_LOCALVERSION_AUTO=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_SYSFS_DEPRECATED is not set +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -57,6 +60,7 @@ CONFIG_KALLSYMS=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -65,10 +69,22 @@ CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 @@ -78,6 +94,7 @@ CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -91,13 +108,18 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type # CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -105,6 +127,8 @@ CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -113,14 +137,17 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -130,6 +157,7 @@ CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x08000000 CONFIG_MEMORY_SIZE=0x01000000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y @@ -139,7 +167,9 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set # CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -147,16 +177,21 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features @@ -164,20 +199,18 @@ CONFIG_NR_QUICK=2 CONFIG_CPU_LITTLE_ENDIAN=y # CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y -# CONFIG_SH_DSP is not set # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y -CONFIG_CPU_HAS_INTC_IRQ=y CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y # # Board support # # CONFIG_SH_7751_SYSTEMH is not set CONFIG_SH_SECUREEDGE5410=y -# CONFIG_SH_HS7751RVOIP is not set # CONFIG_SH_RTS7751R2D is not set # CONFIG_SH_LANDISK is not set # CONFIG_SH_TITAN is not set @@ -189,9 +222,9 @@ CONFIG_SH_SECUREEDGE5410=y CONFIG_SH_TMU=y CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=60000000 -# CONFIG_TICK_ONESHOT is not set # CONFIG_NO_HZ is not set # CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -224,11 +257,15 @@ CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set # CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -241,26 +278,20 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # # Bus options # -CONFIG_SH_CONCAT_FS=y CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_PCI_LEGACY=y # # Executable file formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Networking -# CONFIG_NET=y # @@ -286,14 +317,13 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -301,6 +331,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -310,10 +341,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -321,14 +348,14 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +# CONFIG_PHONET is not set +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set # CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set @@ -352,6 +379,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -365,6 +393,7 @@ CONFIG_MTD_BLOCK_RO=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -401,6 +430,7 @@ CONFIG_MTD_RAM=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_INTEL_VR_NOR is not set CONFIG_MTD_PLATRAM=y # @@ -437,10 +467,12 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set +# CONFIG_BLK_DEV_HD is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -452,44 +484,52 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set +# CONFIG_FUSION is not set # -# Fusion MPT device support +# IEEE 1394 (FireWire) support # -# CONFIG_FUSION is not set # -# IEEE 1394 (FireWire) support +# Enable only one of the two stacks, unless you know what you are doing # # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -501,12 +541,14 @@ CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -516,12 +558,12 @@ CONFIG_8139TOO_PIO=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -540,7 +582,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -564,7 +605,9 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -584,82 +627,77 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set +# CONFIG_VIDEO_MEDIA is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set - -# -# Real Time Clock -# # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -668,18 +706,16 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -703,12 +739,12 @@ CONFIG_ROMFS_FS=y CONFIG_PROC_FS=y # CONFIG_PROC_KCORE is not set CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -724,14 +760,14 @@ CONFIG_RAMFS=y # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y # CONFIG_NFS_FS is not set # CONFIG_NFSD is not set # CONFIG_SMB_FS is not set @@ -745,34 +781,30 @@ CONFIG_CRAMFS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_SH_KGDB is not set @@ -782,6 +814,8 @@ CONFIG_ENABLE_MUST_CHECK=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # @@ -790,6 +824,7 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set # CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y # CONFIG_CRC7 is not set diff --git a/arch/sh/configs/systemh_defconfig b/arch/sh/configs/systemh_defconfig index af921b5a9d46..1711f0f70d72 100644 --- a/arch/sh/configs/systemh_defconfig +++ b/arch/sh/configs/systemh_defconfig @@ -1,36 +1,50 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.18 -# Tue Oct 3 12:57:29 2006 +# Linux kernel version: 2.6.27 +# Wed Oct 22 19:56:48 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y # CONFIG_SYSVIPC is not set # CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_UTS_NS is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -43,34 +57,48 @@ CONFIG_KALLSYMS=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set - -# -# Block layer -# +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -84,59 +112,27 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -CONFIG_SH_7751_SYSTEMH=y -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -# CONFIG_SH_TITAN is not set -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -145,65 +141,93 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x00400000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y -# CONFIG_SH_DSP is not set # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y # -# Timer support +# Board support +# +CONFIG_SH_7751_SYSTEMH=y +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_LANDISK is not set +# CONFIG_SH_TITAN is not set +# CONFIG_SH_LBOX_RE2 is not set + +# +# Timer and clock configuration # CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=60000000 +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -218,21 +242,31 @@ CONFIG_SH_PCLK_FREQ=60000000 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set + +# +# Additional SuperH Device Drivers +# +# CONFIG_HEARTBEAT is not set +# CONFIG_PUSH_SWITCH is not set # # Kernel features # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_PREEMPT_BKL=y +# CONFIG_PREEMPT_RCU is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -245,31 +279,15 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # # Bus options # -# CONFIG_PCI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# - -# -# PCI Hotplug Support -# +# CONFIG_ARCH_SUPPORTS_MSI is not set # # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# -# Networking -# # CONFIG_NET is not set # @@ -282,40 +300,21 @@ CONFIG_BINFMT_ELF=y # CONFIG_STANDALONE is not set CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=1024 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -323,38 +322,10 @@ CONFIG_BLK_DEV_INITRD=y # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# ISDN subsystem -# - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -376,6 +347,7 @@ CONFIG_SERIO=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -390,158 +362,115 @@ CONFIG_SERIO=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# - -# -# Hardware Monitoring support -# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set # CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set # CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set # -# Misc devices +# Sonics Silicon Backplane # +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y +# CONFIG_VIDEO_MEDIA is not set # -# Digital Video Broadcasting Devices +# Multimedia drivers # +# CONFIG_DAB is not set # # Graphics support # -CONFIG_FIRMWARE_EDID=y +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set # CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# Enable Host or Gadget support to see Inventra options # # -# USB Gadget Support +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems # # CONFIG_EXT2_FS is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -565,12 +494,12 @@ CONFIG_DNOTIFY=y CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -585,8 +514,11 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set @@ -595,49 +527,55 @@ CONFIG_CRAMFS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_MEMORY_INIT is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_KGDB is not set +# CONFIG_SH_KGDB is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # +CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig index 0686ed6fe17a..ea3c5e838fc3 100644 --- a/arch/sh/configs/titan_defconfig +++ b/arch/sh/configs/titan_defconfig @@ -1,41 +1,55 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.19-rc3 -# Mon Oct 30 18:04:49 2006 +# Linux kernel version: 2.6.27 +# Wed Oct 22 19:58:12 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_ARCH_DEFCONFIG="arch/sh/configs/shx3_defconfig" CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_SYS_SUPPORTS_PCI=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" # CONFIG_LOCALVERSION_AUTO is not set CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set +CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -49,34 +63,48 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_KMOD=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -90,59 +118,27 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System type # -# CONFIG_SH_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SOLUTION_ENGINE is not set -# CONFIG_SH_7300_SOLUTION_ENGINE is not set -# CONFIG_SH_7343_SOLUTION_ENGINE is not set -# CONFIG_SH_73180_SOLUTION_ENGINE is not set -# CONFIG_SH_7751_SYSTEMH is not set -# CONFIG_SH_HP6XX is not set -# CONFIG_SH_EC3104 is not set -# CONFIG_SH_SATURN is not set -# CONFIG_SH_DREAMCAST is not set -# CONFIG_SH_BIGSUR is not set -# CONFIG_SH_MPC1211 is not set -# CONFIG_SH_SH03 is not set -# CONFIG_SH_SECUREEDGE5410 is not set -# CONFIG_SH_HS7751RVOIP is not set -# CONFIG_SH_7710VOIPGW is not set -# CONFIG_SH_RTS7751R2D is not set -# CONFIG_SH_R7780RP is not set -# CONFIG_SH_EDOSK7705 is not set -# CONFIG_SH_SH4202_MICRODEV is not set -# CONFIG_SH_LANDISK is not set -CONFIG_SH_TITAN=y -# CONFIG_SH_SHMIN is not set -# CONFIG_SH_UNKNOWN is not set - -# -# Processor selection -# CONFIG_CPU_SH4=y - -# -# SH-2 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7604 is not set - -# -# SH-3 Processor Support -# -# CONFIG_CPU_SUBTYPE_SH7300 is not set +# CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set # CONFIG_CPU_SUBTYPE_SH7708 is not set # CONFIG_CPU_SUBTYPE_SH7709 is not set # CONFIG_CPU_SUBTYPE_SH7710 is not set - -# -# SH-4 Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -151,65 +147,94 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SUBTYPE_SH7751R=y # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set - -# -# ST40 Processor Support -# -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set - -# -# SH-4A Processor Support -# +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set - -# -# SH4AL-DSP Processor Support -# -# CONFIG_CPU_SUBTYPE_SH73180 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options # +CONFIG_QUICKLIST=y CONFIG_MMU=y CONFIG_PAGE_OFFSET=0x80000000 CONFIG_MEMORY_START=0x08030000 CONFIG_MEMORY_SIZE=0x7fd0000 +CONFIG_29BIT=y CONFIG_VSYSCALL=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_16KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_ENTRY_OFFSET=0x00001000 CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set +CONFIG_SPARSEMEM_STATIC=y +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 +CONFIG_UNEVICTABLE_LRU=y # # Cache configuration # # CONFIG_SH_DIRECT_MAPPED is not set -# CONFIG_SH_WRITETHROUGH is not set -# CONFIG_SH_OCRAM is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set # # Processor features # CONFIG_CPU_LITTLE_ENDIAN=y +# CONFIG_CPU_BIG_ENDIAN is not set CONFIG_SH_FPU=y -# CONFIG_SH_DSP is not set # CONFIG_SH_STORE_QUEUES is not set CONFIG_CPU_HAS_INTEVT=y +CONFIG_CPU_HAS_IPR_IRQ=y CONFIG_CPU_HAS_SR_RB=y +CONFIG_CPU_HAS_PTEA=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# +# CONFIG_SH_7751_SYSTEMH is not set +# CONFIG_SH_SECUREEDGE5410 is not set +# CONFIG_SH_RTS7751R2D is not set +# CONFIG_SH_LANDISK is not set +CONFIG_SH_TITAN=y +# CONFIG_SH_LBOX_RE2 is not set # -# Timer support +# Timer and clock configuration # CONFIG_SH_TMU=y +CONFIG_SH_TIMER_IRQ=16 CONFIG_SH_PCLK_FREQ=30000000 +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # # CPU Frequency scaling @@ -219,6 +244,7 @@ CONFIG_SH_PCLK_FREQ=30000000 # # DMA support # +CONFIG_SH_DMA_API=y CONFIG_SH_DMA=y CONFIG_NR_ONCHIP_DMA_CHANNELS=8 # CONFIG_NR_DMA_CHANNELS_BOOL is not set @@ -226,20 +252,30 @@ CONFIG_NR_ONCHIP_DMA_CHANNELS=8 # # Companion Chips # -# CONFIG_HD6446X_SERIES is not set + +# +# Additional SuperH Device Drivers +# +# CONFIG_HEARTBEAT is not set +# CONFIG_PUSH_SWITCH is not set # # Kernel features # # CONFIG_HZ_100 is not set CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set # CONFIG_KEXEC is not set -# CONFIG_SMP is not set +# CONFIG_CRASH_DUMP is not set +# CONFIG_SECCOMP is not set # CONFIG_PREEMPT_NONE is not set CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PREEMPT is not set +CONFIG_GUSA=y +# CONFIG_GUSA_RB is not set # # Boot options @@ -257,17 +293,10 @@ CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y -# CONFIG_PCI_MULTITHREAD_PROBE is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# CONFIG_HOTPLUG_PCI=y # CONFIG_HOTPLUG_PCI_FAKE is not set # CONFIG_HOTPLUG_PCI_CPCI is not set @@ -277,30 +306,25 @@ CONFIG_HOTPLUG_PCI=y # Executable file formats # CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_FLAT is not set +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set - -# -# Power management options (EXPERIMENTAL) -# -# CONFIG_PM is not set - -# -# Networking -# CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y CONFIG_XFRM=y # CONFIG_XFRM_USER is not set # CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_IPCOMP=y CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y @@ -308,13 +332,7 @@ CONFIG_ASK_IP_FIB_HASH=y # CONFIG_IP_FIB_TRIE is not set CONFIG_IP_FIB_HASH=y CONFIG_IP_MULTIPLE_TABLES=y -# CONFIG_IP_ROUTE_FWMARK is not set CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_MULTIPATH_CACHED=y -CONFIG_IP_ROUTE_MULTIPATH_RR=m -CONFIG_IP_ROUTE_MULTIPATH_RANDOM=m -CONFIG_IP_ROUTE_MULTIPATH_WRANDOM=m -CONFIG_IP_ROUTE_MULTIPATH_DRR=m # CONFIG_IP_ROUTE_VERBOSE is not set CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y @@ -336,19 +354,17 @@ CONFIG_INET_TUNNEL=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set +# CONFIG_TCP_MD5SIG is not set CONFIG_IPV6=y CONFIG_IPV6_PRIVACY=y # CONFIG_IPV6_ROUTER_PREF is not set +# CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=y CONFIG_INET6_ESP=y CONFIG_INET6_IPCOMP=y @@ -360,11 +376,14 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=y # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set +CONFIG_NETFILTER_ADVANCED=y CONFIG_BRIDGE_NETFILTER=y # @@ -373,134 +392,95 @@ CONFIG_BRIDGE_NETFILTER=y CONFIG_NETFILTER_NETLINK=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +# CONFIG_NF_CONNTRACK is not set CONFIG_NETFILTER_XTABLES=m CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m # CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_MARK=m +# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NOTRACK=m +# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set +# CONFIG_NETFILTER_XT_TARGET_TRACE is not set +# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set +# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m CONFIG_NETFILTER_XT_MATCH_DCCP=m # CONFIG_NETFILTER_XT_MATCH_DSCP is not set CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m +# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set +# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set CONFIG_NETFILTER_XT_MATCH_LENGTH=m CONFIG_NETFILTER_XT_MATCH_LIMIT=m CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m +# CONFIG_NETFILTER_XT_MATCH_OWNER is not set +CONFIG_NETFILTER_XT_MATCH_POLICY=m CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m # CONFIG_NETFILTER_XT_MATCH_QUOTA is not set +# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set CONFIG_NETFILTER_XT_MATCH_REALM=m +# CONFIG_NETFILTER_XT_MATCH_RECENT is not set CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m # CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m +# CONFIG_NETFILTER_XT_MATCH_TIME is not set +# CONFIG_NETFILTER_XT_MATCH_U32 is not set +# CONFIG_IP_VS is not set # # IP: Netfilter Configuration # -CONFIG_IP_NF_CONNTRACK=m -CONFIG_IP_NF_CT_ACCT=y -CONFIG_IP_NF_CONNTRACK_MARK=y -CONFIG_IP_NF_CONNTRACK_EVENTS=y -CONFIG_IP_NF_CONNTRACK_NETLINK=m -# CONFIG_IP_NF_CT_PROTO_SCTP is not set -CONFIG_IP_NF_FTP=m -CONFIG_IP_NF_IRC=m -CONFIG_IP_NF_NETBIOS_NS=m -CONFIG_IP_NF_TFTP=m -# CONFIG_IP_NF_AMANDA is not set -CONFIG_IP_NF_PPTP=m -CONFIG_IP_NF_H323=m -# CONFIG_IP_NF_SIP is not set +# CONFIG_NF_DEFRAG_IPV4 is not set CONFIG_IP_NF_QUEUE=m CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_MATCH_AH=m +CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m -CONFIG_IP_NF_MATCH_HASHLIMIT=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_IP_NF_TARGET_TCPMSS=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_NAT_NEEDED=y -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_IP_NF_NAT_SNMP_BASIC=m -CONFIG_IP_NF_NAT_IRC=m -CONFIG_IP_NF_NAT_FTP=m -CONFIG_IP_NF_NAT_TFTP=m -CONFIG_IP_NF_NAT_PPTP=m -CONFIG_IP_NF_NAT_H323=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m CONFIG_IP_NF_TARGET_ECN=m CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_RAW=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# IPv6: Netfilter Configuration # CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m +CONFIG_IP6_NF_MATCH_AH=m +CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_MATCH_FRAG=m +CONFIG_IP6_NF_MATCH_OPTS=m CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_FILTER=m +# CONFIG_IP6_NF_MATCH_MH is not set +CONFIG_IP6_NF_MATCH_RT=m CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_RAW=m - -# -# Bridge: Netfilter Configuration -# # CONFIG_BRIDGE_NF_EBTABLES is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set +CONFIG_STP=y CONFIG_BRIDGE=y +# CONFIG_NET_DSA is not set CONFIG_VLAN_8021Q=y +# CONFIG_VLAN_8021Q_GVRP is not set # CONFIG_DECNET is not set CONFIG_LLC=y # CONFIG_LLC2 is not set @@ -510,14 +490,7 @@ CONFIG_LLC=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CLK_JIFFIES=y -# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set -# CONFIG_NET_SCH_CLK_CPU is not set # # Queueing/Scheduling @@ -526,6 +499,7 @@ CONFIG_NET_SCH_CBQ=m CONFIG_NET_SCH_HTB=m CONFIG_NET_SCH_HFSC=m CONFIG_NET_SCH_PRIO=m +# CONFIG_NET_SCH_MULTIQ is not set CONFIG_NET_SCH_RED=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m @@ -549,6 +523,7 @@ CONFIG_CLS_U32_PERF=y CONFIG_CLS_U32_MARK=y CONFIG_NET_CLS_RSVP=m CONFIG_NET_CLS_RSVP6=m +# CONFIG_NET_CLS_FLOW is not set CONFIG_NET_EMATCH=y CONFIG_NET_EMATCH_STACK=32 CONFIG_NET_EMATCH_CMP=m @@ -562,27 +537,37 @@ CONFIG_NET_ACT_GACT=m CONFIG_GACT_PROB=y CONFIG_NET_ACT_MIRRED=m CONFIG_NET_ACT_IPT=m +# CONFIG_NET_ACT_NAT is not set CONFIG_NET_ACT_PEDIT=m # CONFIG_NET_ACT_SIMP is not set +# CONFIG_NET_ACT_SKBEDIT is not set CONFIG_NET_CLS_IND=y -CONFIG_NET_ESTIMATOR=y +CONFIG_NET_SCH_FIFO=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set +# CONFIG_PHONET is not set +CONFIG_FIB_RULES=y +CONFIG_WIRELESS=y +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set +CONFIG_WIRELESS_EXT=y +CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_MAC80211 is not set CONFIG_IEEE80211=y # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=y CONFIG_IEEE80211_CRYPT_CCMP=y CONFIG_IEEE80211_CRYPT_TKIP=y -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y -CONFIG_FIB_RULES=y +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -591,20 +576,16 @@ CONFIG_FIB_RULES=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=m CONFIG_MTD_DEBUG=y CONFIG_MTD_DEBUG_VERBOSE=0 @@ -615,6 +596,7 @@ CONFIG_MTD_DEBUG_VERBOSE=0 # User Modules And Translation Layers # CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=m CONFIG_MTD_BLOCK=m # CONFIG_MTD_BLOCK_RO is not set CONFIG_FTL=m @@ -623,6 +605,7 @@ CONFIG_NFTL=m CONFIG_INFTL=m CONFIG_RFD_FTL=m # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -644,16 +627,17 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_CFI_INTELEXT is not set # CONFIG_MTD_CFI_AMDSTD is not set # CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=m # CONFIG_MTD_RAM is not set # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access # # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # @@ -671,34 +655,23 @@ CONFIG_MTD_CFI_I2=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# CONFIG_MTD_NAND=m # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=m # CONFIG_MTD_NAND_DISKONCHIP is not set - -# -# OneNAND Flash Device Drivers -# +# CONFIG_MTD_NAND_CAFE is not set +# CONFIG_MTD_NAND_PLATFORM is not set +# CONFIG_MTD_ALAUDA is not set # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set @@ -711,20 +684,18 @@ CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# +# CONFIG_BLK_DEV_HD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -732,6 +703,8 @@ CONFIG_ATA_OVER_ETH=m # # CONFIG_RAID_ATTRS is not set CONFIG_SCSI=y +CONFIG_SCSI_DMA=y +# CONFIG_SCSI_TGT is not set # CONFIG_SCSI_NETLINK is not set CONFIG_SCSI_PROC_FS=y @@ -752,6 +725,8 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_MULTI_LUN is not set # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set +# CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -759,12 +734,9 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_SPI_ATTRS is not set # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set -# CONFIG_SCSI_SAS_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# +# CONFIG_SCSI_SRP_ATTRS is not set +CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set @@ -774,7 +746,6 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_AIC7XXX_OLD is not set # CONFIG_SCSI_AIC79XX is not set # CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set # CONFIG_SCSI_ARCMSR is not set # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set @@ -785,6 +756,7 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_IPS is not set # CONFIG_SCSI_INITIO is not set # CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_MVSAS is not set # CONFIG_SCSI_STEX is not set # CONFIG_SCSI_SYM53C8XX_2 is not set # CONFIG_SCSI_QLOGIC_1280 is not set @@ -795,53 +767,31 @@ CONFIG_CHR_DEV_SG=m # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# +# CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support # -# CONFIG_IEEE1394 is not set # -# I2O device support +# Enable only one of the two stacks, unless you know what you are doing # +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y # CONFIG_IFB is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m - -# -# ARCnet devices -# +# CONFIG_VETH is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# CONFIG_PHYLIB=m # @@ -854,32 +804,35 @@ CONFIG_LXT_PHY=m CONFIG_CICADA_PHY=m # CONFIG_VITESSE_PHY is not set # CONFIG_SMSC_PHY is not set -# CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set - -# -# Tulip family network device support -# +# CONFIG_SMC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -891,18 +844,21 @@ CONFIG_8139TOO=y CONFIG_8139TOO_TUNE_TWISTER=y # CONFIG_8139TOO_8129 is not set CONFIG_8139_OLD_RX_RESET=y +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set - -# -# Ethernet (1000 Mbit) -# +# CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -910,63 +866,56 @@ CONFIG_8139_OLD_RX_RESET=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set # CONFIG_QLA3XXX is not set - -# -# Ethernet (10000 Mbit) -# +# CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_JME is not set +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_ENIC is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set - -# -# Token Ring devices -# +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set +# CONFIG_QLGE is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -CONFIG_NET_RADIO=y -CONFIG_NET_WIRELESS_RTNETLINK=y - -# -# Obsolete Wireless cards support (pre-802.11) -# -# CONFIG_STRIP is not set - -# -# Wireless 802.11b ISA/PCI cards support -# -# CONFIG_IPW2100 is not set -# CONFIG_IPW2200 is not set -# CONFIG_HERMES is not set -# CONFIG_ATMEL is not set - -# -# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# Wireless LAN # -CONFIG_PRISM54=m -# CONFIG_USB_ZD1201 is not set -# CONFIG_HOSTAP is not set -CONFIG_BCM43XX=m -CONFIG_BCM43XX_DEBUG=y -CONFIG_BCM43XX_DMA=y -CONFIG_BCM43XX_PIO=y -CONFIG_BCM43XX_DMA_AND_PIO_MODE=y -# CONFIG_BCM43XX_DMA_MODE is not set -# CONFIG_BCM43XX_PIO_MODE is not set -# CONFIG_ZD1211RW is not set -CONFIG_NET_WIRELESS=y +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # -# Wan interfaces +# USB Network Adapters # +CONFIG_USB_CATC=m +CONFIG_USB_KAWETH=m +CONFIG_USB_PEGASUS=m +CONFIG_USB_RTL8150=m +CONFIG_USB_USBNET=m +CONFIG_USB_NET_AX8817X=m +CONFIG_USB_NET_CDCETHER=m +# CONFIG_USB_NET_DM9601 is not set +# CONFIG_USB_NET_SMSC95XX is not set +# CONFIG_USB_NET_GL620A is not set +CONFIG_USB_NET_NET1080=m +CONFIG_USB_NET_PLUSB=m +# CONFIG_USB_NET_MCS7830 is not set +# CONFIG_USB_NET_RNDIS_HOST is not set +# CONFIG_USB_NET_CDC_SUBSET is not set +CONFIG_USB_NET_ZAURUS=m # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -979,25 +928,17 @@ CONFIG_PPP_DEFLATE=m CONFIG_PPP_BSDCOMP=m CONFIG_PPP_MPPE=m CONFIG_PPPOE=m +# CONFIG_PPPOL2TP is not set CONFIG_SLIP=m CONFIG_SLIP_COMPRESSED=y CONFIG_SLHC=m CONFIG_SLIP_SMART=y # CONFIG_SLIP_MODE_SLIP6 is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -1005,6 +946,7 @@ CONFIG_SLIP_SMART=y # CONFIG_INPUT=y # CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set # # Userland interfaces @@ -1014,7 +956,6 @@ CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -1024,6 +965,7 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_KEYBOARD is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set @@ -1037,10 +979,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # Character devices # CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -1059,15 +1004,36 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_I5K_AMB is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_VT8231 is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -1075,6 +1041,7 @@ CONFIG_WATCHDOG=y # Watchdog Device Drivers # # CONFIG_SOFT_WATCHDOG is not set +# CONFIG_ALIM7101_WDT is not set CONFIG_SH_WDT=m # CONFIG_SH_WDT_MMAP is not set @@ -1088,113 +1055,121 @@ CONFIG_SH_WDT=m # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set -CONFIG_HW_RANDOM=y -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set # -# Ftape, the floppy tape device driver +# Sonics Silicon Backplane # -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# I2C support +# Multifunction device drivers # -# CONFIG_I2C is not set +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_WM8400 is not set # -# SPI support +# Multimedia devices # -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # -# Dallas's 1-wire bus +# Multimedia core support # -# CONFIG_W1 is not set +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set # -# Hardware Monitoring support +# Multimedia drivers # -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_DAB is not set # -# Multimedia devices +# Graphics support # -# CONFIG_VIDEO_DEV is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Digital Video Broadcasting Devices +# Display device support # -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set +# CONFIG_DISPLAY_SUPPORT is not set # -# Graphics support +# Console display driver support # -CONFIG_FIRMWARE_EDID=y -# CONFIG_FB is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # -# Console display driver support +# USB Input Devices # -CONFIG_DUMMY_CONSOLE=y -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_USB_HID is not set +# CONFIG_HID_PID is not set # -# Sound +# USB HID Boot Protocol drivers # -# CONFIG_SOUND is not set +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set # -# USB support +# Special HID drivers # +CONFIG_HID_COMPAT=y +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y -# CONFIG_USB_BANDWIDTH is not set +CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set +CONFIG_USB_MON=y # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_SPLIT_ISO=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y -# CONFIG_USB_OHCI_BIG_ENDIAN is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # # USB Device Class drivers # CONFIG_USB_ACM=m CONFIG_USB_PRINTER=m +# CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1207,76 +1182,34 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # -# USB Input Devices -# -# CONFIG_USB_HID is not set - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set - -# # USB Imaging devices # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set # -# USB Network Adapters -# -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_CDCETHER=m -# CONFIG_USB_NET_GL620A is not set -CONFIG_USB_NET_NET1080=m -CONFIG_USB_NET_PLUSB=m -# CONFIG_USB_NET_MCS7830 is not set -# CONFIG_USB_NET_RNDIS_HOST is not set -# CONFIG_USB_NET_CDC_SUBSET is not set -CONFIG_USB_NET_ZAURUS=m -CONFIG_USB_MON=y - -# # USB port drivers # - -# -# USB Serial Converter support -# CONFIG_USB_SERIAL=m +# CONFIG_USB_EZUSB is not set CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_AIRCABLE is not set -# CONFIG_USB_SERIAL_AIRPRIME is not set CONFIG_USB_SERIAL_ARK3116=m # CONFIG_USB_SERIAL_BELKIN is not set +# CONFIG_USB_SERIAL_CH341 is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_CP2101 is not set @@ -1291,6 +1224,7 @@ CONFIG_USB_SERIAL_ARK3116=m # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_GARMIN is not set # CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_IUU is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set @@ -1298,8 +1232,11 @@ CONFIG_USB_SERIAL_ARK3116=m # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set # CONFIG_USB_SERIAL_NAVMAN is not set CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set @@ -1308,6 +1245,7 @@ CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_DEBUG is not set # # USB Miscellaneous drivers @@ -1315,10 +1253,11 @@ CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set @@ -1329,80 +1268,53 @@ CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SISUSBVGA is not set # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# +# CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# # CONFIG_MMC is not set - -# -# LED devices -# +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# CONFIG_RTC_LIB=m CONFIG_RTC_CLASS=m # # RTC interfaces # -CONFIG_RTC_INTF_SYSFS=m -CONFIG_RTC_INTF_PROC=m -CONFIG_RTC_INTF_DEV=m +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is not set - -# -# RTC drivers -# -# CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_DS1742 is not set -# CONFIG_RTC_DRV_M48T86 is not set -CONFIG_RTC_DRV_SH=m # CONFIG_RTC_DRV_TEST is not set -# CONFIG_RTC_DRV_V3020 is not set # -# DMA Engine support +# SPI RTC drivers # -# CONFIG_DMA_ENGINE is not set # -# DMA Clients +# Platform RTC drivers # +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# DMA Devices +# on-CPU RTC drivers # +CONFIG_RTC_DRV_SH=m +# CONFIG_DMADEVICES is not set +# CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1412,31 +1324,25 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -CONFIG_EXT4DEV_FS=m -# CONFIG_EXT4DEV_FS_XATTR is not set +# CONFIG_EXT4_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_JBD2=m -# CONFIG_JBD2_DEBUG is not set CONFIG_REISERFS_FS=m # CONFIG_REISERFS_CHECK is not set # CONFIG_REISERFS_PROC_INFO is not set # CONFIG_REISERFS_FS_XATTR is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m @@ -1447,7 +1353,6 @@ CONFIG_FUSE_FS=m CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y -CONFIG_ZISOFS_FS=m CONFIG_UDF_FS=m CONFIG_UDF_NLS=y @@ -1467,12 +1372,12 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y CONFIG_CONFIGFS_FS=m # @@ -1485,34 +1390,32 @@ CONFIG_CONFIGFS_FS=m # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set +CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y -CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set CONFIG_SMB_FS=m @@ -1526,7 +1429,6 @@ CONFIG_CIFS_WEAK_PW_HASH=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -CONFIG_9P_FS=m # # Partition Types @@ -1548,10 +1450,7 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_SUN_PARTITION is not set # CONFIG_KARMA_PARTITION is not set # CONFIG_EFI_PARTITION is not set - -# -# Native Language Support -# +# CONFIG_SYSV68_PARTITION is not set CONFIG_NLS=m CONFIG_NLS_DEFAULT="iso8859-1" CONFIG_NLS_CODEPAGE_437=m @@ -1592,101 +1491,180 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m - -# -# Profiling support -# -# CONFIG_PROFILING is not set +# CONFIG_DLM is not set # # Kernel hacking # +CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y -CONFIG_LOG_BUF_SHIFT=16 +# CONFIG_DEBUG_SHIRQ is not set # CONFIG_DETECT_SOFTLOCKUP is not set +CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set -# CONFIG_DEBUG_FS is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set # CONFIG_FRAME_POINTER is not set -# CONFIG_FORCED_INLINING is not set -# CONFIG_HEADERS_CHECK is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FTRACE=y +# CONFIG_FTRACE is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_EARLY_PRINTK is not set +# CONFIG_DEBUG_BOOTMEM is not set # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set -# CONFIG_KGDB is not set +# CONFIG_IRQSTACKS is not set +# CONFIG_SH_KGDB is not set # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y # -# Cryptographic options +# Crypto core or helper # -CONFIG_CRYPTO=y +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=y +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m CONFIG_CRYPTO_TGR192=m -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# CONFIG_CRYPTO_AES=y +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=y +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_MICHAEL_MIC=y -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_LZO is not set # -# Hardware crypto devices +# Random Number Generation # +# CONFIG_CRYPTO_ANSI_CPRNG is not set +CONFIG_CRYPTO_HW=y +# CONFIG_CRYPTO_DEV_HIFN_795X is not set # # Library routines # +CONFIG_BITREVERSE=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m +# CONFIG_CRC_T10DIF is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y @@ -1695,3 +1673,6 @@ CONFIG_TEXTSEARCH_KMP=m CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/sh/include/asm/gpio.h b/arch/sh/include/asm/gpio.h index 9650e7c9c39e..90673658eb14 100644 --- a/arch/sh/include/asm/gpio.h +++ b/arch/sh/include/asm/gpio.h @@ -12,6 +12,9 @@ #ifndef __ASM_SH_GPIO_H #define __ASM_SH_GPIO_H +#include <linux/kernel.h> +#include <linux/errno.h> + #if defined(CONFIG_CPU_SH3) #include <cpu/gpio.h> #endif @@ -62,6 +65,7 @@ struct pinmux_data_reg { struct pinmux_range { pinmux_enum_t begin; pinmux_enum_t end; + pinmux_enum_t force; }; struct pinmux_info { @@ -99,9 +103,20 @@ int gpio_direction_input(unsigned gpio); int gpio_direction_output(unsigned gpio, int value); int gpio_get_value(unsigned gpio); void gpio_set_value(unsigned gpio, int value); -static inline int gpio_export(unsigned gpio, bool direction_may_change) + +/* IRQ modes are unspported */ +static inline int gpio_to_irq(unsigned gpio) +{ + WARN_ON(1); + return -EINVAL; +} + +static inline int irq_to_gpio(unsigned irq) { - return 0; + WARN_ON(1); + return -EINVAL; } +#include <asm-generic/gpio.h> + #endif /* __ASM_SH_GPIO_H */ diff --git a/arch/sh/include/asm/kdebug.h b/arch/sh/include/asm/kdebug.h index 49cd69051a88..0b9f896f203c 100644 --- a/arch/sh/include/asm/kdebug.h +++ b/arch/sh/include/asm/kdebug.h @@ -4,6 +4,7 @@ /* Grossly misnamed. */ enum die_val { DIE_TRAP, + DIE_OOPS, }; #endif /* __ASM_SH_KDEBUG_H */ diff --git a/arch/sh/include/cpu-sh4/cpu/sh7785.h b/arch/sh/include/cpu-sh4/cpu/sh7785.h new file mode 100644 index 000000000000..e4006afb735e --- /dev/null +++ b/arch/sh/include/cpu-sh4/cpu/sh7785.h @@ -0,0 +1,234 @@ +#ifndef __ASM_SH7785_H__ +#define __ASM_SH7785_H__ + +enum { + /* PA */ + GPIO_PA7, GPIO_PA6, GPIO_PA5, GPIO_PA4, + GPIO_PA3, GPIO_PA2, GPIO_PA1, GPIO_PA0, + + /* PB */ + GPIO_PB7, GPIO_PB6, GPIO_PB5, GPIO_PB4, + GPIO_PB3, GPIO_PB2, GPIO_PB1, GPIO_PB0, + + /* PC */ + GPIO_PC7, GPIO_PC6, GPIO_PC5, GPIO_PC4, + GPIO_PC3, GPIO_PC2, GPIO_PC1, GPIO_PC0, + + /* PD */ + GPIO_PD7, GPIO_PD6, GPIO_PD5, GPIO_PD4, + GPIO_PD3, GPIO_PD2, GPIO_PD1, GPIO_PD0, + + /* PE */ + GPIO_PE5, GPIO_PE4, GPIO_PE3, GPIO_PE2, + GPIO_PE1, GPIO_PE0, + + /* PF */ + GPIO_PF7, GPIO_PF6, GPIO_PF5, GPIO_PF4, + GPIO_PF3, GPIO_PF2, GPIO_PF1, GPIO_PF0, + + /* PG */ + GPIO_PG7, GPIO_PG6, GPIO_PG5, GPIO_PG4, + GPIO_PG3, GPIO_PG2, GPIO_PG1, GPIO_PG0, + + /* PH */ + GPIO_PH7, GPIO_PH6, GPIO_PH5, GPIO_PH4, + GPIO_PH3, GPIO_PH2, GPIO_PH1, GPIO_PH0, + + /* PJ */ + GPIO_PJ7, GPIO_PJ6, GPIO_PJ5, GPIO_PJ4, + GPIO_PJ3, GPIO_PJ2, GPIO_PJ1, GPIO_PJ0, + + /* PK */ + GPIO_PK7, GPIO_PK6, GPIO_PK5, GPIO_PK4, + GPIO_PK3, GPIO_PK2, GPIO_PK1, GPIO_PK0, + + /* PL */ + GPIO_PL7, GPIO_PL6, GPIO_PL5, GPIO_PL4, + GPIO_PL3, GPIO_PL2, GPIO_PL1, GPIO_PL0, + + /* PM */ + GPIO_PM1, GPIO_PM0, + + /* PN */ + GPIO_PN7, GPIO_PN6, GPIO_PN5, GPIO_PN4, + GPIO_PN3, GPIO_PN2, GPIO_PN1, GPIO_PN0, + + /* PP */ + GPIO_PP5, GPIO_PP4, + GPIO_PP3, GPIO_PP2, GPIO_PP1, GPIO_PP0, + + /* PQ */ + GPIO_PQ4, + GPIO_PQ3, GPIO_PQ2, GPIO_PQ1, GPIO_PQ0, + + /* PR */ + GPIO_PR3, GPIO_PR2, GPIO_PR1, GPIO_PR0, + + GPIO_FN_D63_AD31, + GPIO_FN_D62_AD30, + GPIO_FN_D61_AD29, + GPIO_FN_D60_AD28, + GPIO_FN_D59_AD27, + GPIO_FN_D58_AD26, + GPIO_FN_D57_AD25, + GPIO_FN_D56_AD24, + GPIO_FN_D55_AD23, + GPIO_FN_D54_AD22, + GPIO_FN_D53_AD21, + GPIO_FN_D52_AD20, + GPIO_FN_D51_AD19, + GPIO_FN_D50_AD18, + GPIO_FN_D49_AD17_DB5, + GPIO_FN_D48_AD16_DB4, + GPIO_FN_D47_AD15_DB3, + GPIO_FN_D46_AD14_DB2, + GPIO_FN_D45_AD13_DB1, + GPIO_FN_D44_AD12_DB0, + GPIO_FN_D43_AD11_DG5, + GPIO_FN_D42_AD10_DG4, + GPIO_FN_D41_AD9_DG3, + GPIO_FN_D40_AD8_DG2, + GPIO_FN_D39_AD7_DG1, + GPIO_FN_D38_AD6_DG0, + GPIO_FN_D37_AD5_DR5, + GPIO_FN_D36_AD4_DR4, + GPIO_FN_D35_AD3_DR3, + GPIO_FN_D34_AD2_DR2, + GPIO_FN_D33_AD1_DR1, + GPIO_FN_D32_AD0_DR0, + GPIO_FN_REQ1, + GPIO_FN_REQ2, + GPIO_FN_REQ3, + GPIO_FN_GNT1, + GPIO_FN_GNT2, + GPIO_FN_GNT3, + GPIO_FN_MMCCLK, + GPIO_FN_D31, + GPIO_FN_D30, + GPIO_FN_D29, + GPIO_FN_D28, + GPIO_FN_D27, + GPIO_FN_D26, + GPIO_FN_D25, + GPIO_FN_D24, + GPIO_FN_D23, + GPIO_FN_D22, + GPIO_FN_D21, + GPIO_FN_D20, + GPIO_FN_D19, + GPIO_FN_D18, + GPIO_FN_D17, + GPIO_FN_D16, + GPIO_FN_SCIF1_SCK, + GPIO_FN_SCIF1_RXD, + GPIO_FN_SCIF1_TXD, + GPIO_FN_SCIF0_CTS, + GPIO_FN_INTD, + GPIO_FN_FCE, + GPIO_FN_SCIF0_RTS, + GPIO_FN_HSPI_CS, + GPIO_FN_FSE, + GPIO_FN_SCIF0_SCK, + GPIO_FN_HSPI_CLK, + GPIO_FN_FRE, + GPIO_FN_SCIF0_RXD, + GPIO_FN_HSPI_RX, + GPIO_FN_FRB, + GPIO_FN_SCIF0_TXD, + GPIO_FN_HSPI_TX, + GPIO_FN_FWE, + GPIO_FN_SCIF5_TXD, + GPIO_FN_HAC1_SYNC, + GPIO_FN_SSI1_WS, + GPIO_FN_SIOF_TXD_PJ, + GPIO_FN_HAC0_SDOUT, + GPIO_FN_SSI0_SDATA, + GPIO_FN_SIOF_RXD_PJ, + GPIO_FN_HAC0_SDIN, + GPIO_FN_SSI0_SCK, + GPIO_FN_SIOF_SYNC_PJ, + GPIO_FN_HAC0_SYNC, + GPIO_FN_SSI0_WS, + GPIO_FN_SIOF_MCLK_PJ, + GPIO_FN_HAC_RES, + GPIO_FN_SIOF_SCK_PJ, + GPIO_FN_HAC0_BITCLK, + GPIO_FN_SSI0_CLK, + GPIO_FN_HAC1_BITCLK, + GPIO_FN_SSI1_CLK, + GPIO_FN_TCLK, + GPIO_FN_IOIS16, + GPIO_FN_STATUS0, + GPIO_FN_DRAK0_PK3, + GPIO_FN_STATUS1, + GPIO_FN_DRAK1_PK2, + GPIO_FN_DACK2, + GPIO_FN_SCIF2_TXD, + GPIO_FN_MMCCMD, + GPIO_FN_SIOF_TXD_PK, + GPIO_FN_DACK3, + GPIO_FN_SCIF2_SCK, + GPIO_FN_MMCDAT, + GPIO_FN_SIOF_SCK_PK, + GPIO_FN_DREQ0, + GPIO_FN_DREQ1, + GPIO_FN_DRAK0_PK1, + GPIO_FN_DRAK1_PK0, + GPIO_FN_DREQ2, + GPIO_FN_INTB, + GPIO_FN_DREQ3, + GPIO_FN_INTC, + GPIO_FN_DRAK2, + GPIO_FN_CE2A, + GPIO_FN_IRL4, + GPIO_FN_FD4, + GPIO_FN_IRL5, + GPIO_FN_FD5, + GPIO_FN_IRL6, + GPIO_FN_FD6, + GPIO_FN_IRL7, + GPIO_FN_FD7, + GPIO_FN_DRAK3, + GPIO_FN_CE2B, + GPIO_FN_BREQ_BSACK, + GPIO_FN_BACK_BSREQ, + GPIO_FN_SCIF5_RXD, + GPIO_FN_HAC1_SDIN, + GPIO_FN_SSI1_SCK, + GPIO_FN_SCIF5_SCK, + GPIO_FN_HAC1_SDOUT, + GPIO_FN_SSI1_SDATA, + GPIO_FN_SCIF3_TXD, + GPIO_FN_FCLE, + GPIO_FN_SCIF3_RXD, + GPIO_FN_FALE, + GPIO_FN_SCIF3_SCK, + GPIO_FN_FD0, + GPIO_FN_SCIF4_TXD, + GPIO_FN_FD1, + GPIO_FN_SCIF4_RXD, + GPIO_FN_FD2, + GPIO_FN_SCIF4_SCK, + GPIO_FN_FD3, + GPIO_FN_DEVSEL_DCLKOUT, + GPIO_FN_STOP_CDE, + GPIO_FN_LOCK_ODDF, + GPIO_FN_TRDY_DISPL, + GPIO_FN_IRDY_HSYNC, + GPIO_FN_PCIFRAME_VSYNC, + GPIO_FN_INTA, + GPIO_FN_GNT0_GNTIN, + GPIO_FN_REQ0_REQOUT, + GPIO_FN_PERR, + GPIO_FN_SERR, + GPIO_FN_WE7_CBE3, + GPIO_FN_WE6_CBE2, + GPIO_FN_WE5_CBE1, + GPIO_FN_WE4_CBE0, + GPIO_FN_SCIF2_RXD, + GPIO_FN_SIOF_RXD, + GPIO_FN_MRESETOUT, + GPIO_FN_IRQOUT, +}; + +#endif /* __ASM_SH7785_H__ */ diff --git a/arch/sh/include/mach-common/mach/highlander.h b/arch/sh/include/mach-common/mach/highlander.h index 306f7359f7d4..bd26a848cb0b 100644 --- a/arch/sh/include/mach-common/mach/highlander.h +++ b/arch/sh/include/mach-common/mach/highlander.h @@ -195,4 +195,10 @@ unsigned char *highlander_plat_irq_setup(void); +#ifdef CONFIG_SH_R7785RP +void highlander_plat_pinmux_setup(void); +#else +#define highlander_plat_pinmux_setup() do { } while (0) +#endif + #endif /* __ASM_SH_RENESAS_R7780RP */ diff --git a/arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c b/arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c index 39a5b880418f..c465af7283fc 100644 --- a/arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c +++ b/arch/sh/kernel/cpu/sh2a/pinmux-sh7203.c @@ -11,7 +11,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/gpio.h> -#include <asm/sh7203.h> +#include <cpu/sh7203.h> enum { PINMUX_RESERVED = 0, @@ -46,11 +46,10 @@ enum { PINMUX_DATA_END, PINMUX_INPUT_BEGIN, + FORCE_IN, PA7_IN, PA6_IN, PA5_IN, PA4_IN, PA3_IN, PA2_IN, PA1_IN, PA0_IN, PB11_IN, PB10_IN, PB9_IN, PB8_IN, - PB7_IN, PB6_IN, PB5_IN, PB4_IN, - PB3_IN, PB2_IN, PB1_IN, PB0_IN, PC14_IN, PC13_IN, PC12_IN, PC11_IN, PC10_IN, PC9_IN, PC8_IN, PC7_IN, PC6_IN, PC5_IN, PC4_IN, @@ -74,7 +73,7 @@ enum { PINMUX_INPUT_END, PINMUX_OUTPUT_BEGIN, - PB12_OUT, + FORCE_OUT, PB11_OUT, PB10_OUT, PB9_OUT, PB8_OUT, PC14_OUT, PC13_OUT, PC12_OUT, PC11_OUT, PC10_OUT, PC9_OUT, PC8_OUT, @@ -285,7 +284,7 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(PA0_DATA, PA0_IN), /* PB */ - PINMUX_DATA(PB12_DATA, PB12MD_00, PB12_OUT), + PINMUX_DATA(PB12_DATA, PB12MD_00, FORCE_OUT), PINMUX_DATA(WDTOVF_MARK, PB12MD_01), PINMUX_DATA(IRQOUT_MARK, PB12MD_10, PB12IRQ_00), PINMUX_DATA(REFOUT_MARK, PB12MD_10, PB12IRQ_01), @@ -306,42 +305,42 @@ static pinmux_enum_t pinmux_data[] = { PINMUX_DATA(CRX0_MARK, PB8MD_01), PINMUX_DATA(CRX0_CRX1_MARK, PB8MD_10), - PINMUX_DATA(PB7_DATA, PB7MD_00, PB7_IN), + PINMUX_DATA(PB7_DATA, PB7MD_00, FORCE_IN), PINMUX_DATA(SDA3_MARK, PB7MD_01), PINMUX_DATA(PINT7_PB_MARK, PB7MD_10), PINMUX_DATA(IRQ7_PB_MARK, PB7MD_11), - PINMUX_DATA(PB6_DATA, PB6MD_00, PB6_IN), + PINMUX_DATA(PB6_DATA, PB6MD_00, FORCE_IN), PINMUX_DATA(SCL3_MARK, PB6MD_01), PINMUX_DATA(PINT6_PB_MARK, PB6MD_10), PINMUX_DATA(IRQ6_PB_MARK, PB6MD_11), - PINMUX_DATA(PB5_DATA, PB5MD_00, PB5_IN), + PINMUX_DATA(PB5_DATA, PB5MD_00, FORCE_IN), PINMUX_DATA(SDA2_MARK, PB6MD_01), PINMUX_DATA(PINT5_PB_MARK, PB6MD_10), PINMUX_DATA(IRQ5_PB_MARK, PB6MD_11), - PINMUX_DATA(PB4_DATA, PB4MD_00, PB4_IN), + PINMUX_DATA(PB4_DATA, PB4MD_00, FORCE_IN), PINMUX_DATA(SCL2_MARK, PB4MD_01), PINMUX_DATA(PINT4_PB_MARK, PB4MD_10), PINMUX_DATA(IRQ4_PB_MARK, PB4MD_11), - PINMUX_DATA(PB3_DATA, PB3MD_00, PB3_IN), + PINMUX_DATA(PB3_DATA, PB3MD_00, FORCE_IN), PINMUX_DATA(SDA1_MARK, PB3MD_01), PINMUX_DATA(PINT3_PB_MARK, PB3MD_10), PINMUX_DATA(IRQ3_PB_MARK, PB3MD_11), - PINMUX_DATA(PB2_DATA, PB2MD_00, PB2_IN), + PINMUX_DATA(PB2_DATA, PB2MD_00, FORCE_IN), PINMUX_DATA(SCL1_MARK, PB2MD_01), PINMUX_DATA(PINT2_PB_MARK, PB2MD_10), PINMUX_DATA(IRQ2_PB_MARK, PB2MD_11), - PINMUX_DATA(PB1_DATA, PB1MD_00, PB1_IN), + PINMUX_DATA(PB1_DATA, PB1MD_00, FORCE_IN), PINMUX_DATA(SDA0_MARK, PB1MD_01), PINMUX_DATA(PINT1_PB_MARK, PB1MD_10), PINMUX_DATA(IRQ1_PB_MARK, PB1MD_11), - PINMUX_DATA(PB0_DATA, PB0MD_00, PB0_IN), + PINMUX_DATA(PB0_DATA, PB0MD_00, FORCE_IN), PINMUX_DATA(SCL0_MARK, PB0MD_01), PINMUX_DATA(PINT0_PB_MARK, PB0MD_10), PINMUX_DATA(IRQ0_PB_MARK, PB0MD_11), @@ -1575,8 +1574,8 @@ static struct pinmux_info sh7203_pinmux_info = { .name = "sh7203_pfc", .reserved_id = PINMUX_RESERVED, .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END }, - .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END }, - .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END }, + .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END, FORCE_IN }, + .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END, FORCE_OUT }, .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END }, .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END }, @@ -1595,5 +1594,4 @@ static int __init plat_pinmux_setup(void) { return register_pinmux(&sh7203_pinmux_info); } - arch_initcall(plat_pinmux_setup); diff --git a/arch/sh/kernel/cpu/sh4a/Makefile b/arch/sh/kernel/cpu/sh4a/Makefile index be9a0c185958..8e344ec5847e 100644 --- a/arch/sh/kernel/cpu/sh4a/Makefile +++ b/arch/sh/kernel/cpu/sh4a/Makefile @@ -30,6 +30,7 @@ clock-$(CONFIG_CPU_SUBTYPE_SHX3) := clock-shx3.o # Pinmux setup pinmux-$(CONFIG_CPU_SUBTYPE_SH7722) := pinmux-sh7722.o pinmux-$(CONFIG_CPU_SUBTYPE_SH7723) := pinmux-sh7723.o +pinmux-$(CONFIG_CPU_SUBTYPE_SH7785) := pinmux-sh7785.o obj-y += $(clock-y) obj-$(CONFIG_SMP) += $(smp-y) diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c index 45889d412c80..3177d0d1e06d 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7763.c @@ -18,7 +18,6 @@ static int bfc_divisors[] = { 1, 1, 1, 8, 1, 1, 1, 1 }; static int p0fc_divisors[] = { 1, 1, 1, 8, 1, 1, 1, 1 }; -static int p1fc_divisors[] = { 1, 1, 1, 16, 1, 1, 1, 1 }; static int cfc_divisors[] = { 1, 1, 4, 1, 1, 1, 1, 1 }; static void master_clk_init(struct clk *clk) diff --git a/arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c b/arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c new file mode 100644 index 000000000000..5ebc25fd9b2a --- /dev/null +++ b/arch/sh/kernel/cpu/sh4a/pinmux-sh7785.c @@ -0,0 +1,1310 @@ +/* + * SH7785 Pinmux + * + * Copyright (C) 2008 Magnus Damm + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <cpu/sh7785.h> + +enum { + PINMUX_RESERVED = 0, + + PINMUX_DATA_BEGIN, + PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA, + PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA, + PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA, + PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA, + PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA, + PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA, + PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA, + PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA, + PE5_DATA, PE4_DATA, PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA, + PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA, + PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA, + PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA, + PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA, + PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA, + PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA, + PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA, + PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA, + PK7_DATA, PK6_DATA, PK5_DATA, PK4_DATA, + PK3_DATA, PK2_DATA, PK1_DATA, PK0_DATA, + PL7_DATA, PL6_DATA, PL5_DATA, PL4_DATA, + PL3_DATA, PL2_DATA, PL1_DATA, PL0_DATA, + PM1_DATA, PM0_DATA, + PN7_DATA, PN6_DATA, PN5_DATA, PN4_DATA, + PN3_DATA, PN2_DATA, PN1_DATA, PN0_DATA, + PP5_DATA, PP4_DATA, PP3_DATA, PP2_DATA, PP1_DATA, PP0_DATA, + PQ4_DATA, PQ3_DATA, PQ2_DATA, PQ1_DATA, PQ0_DATA, + PR3_DATA, PR2_DATA, PR1_DATA, PR0_DATA, + PINMUX_DATA_END, + + PINMUX_INPUT_BEGIN, + PA7_IN, PA6_IN, PA5_IN, PA4_IN, + PA3_IN, PA2_IN, PA1_IN, PA0_IN, + PB7_IN, PB6_IN, PB5_IN, PB4_IN, + PB3_IN, PB2_IN, PB1_IN, PB0_IN, + PC7_IN, PC6_IN, PC5_IN, PC4_IN, + PC3_IN, PC2_IN, PC1_IN, PC0_IN, + PD7_IN, PD6_IN, PD5_IN, PD4_IN, + PD3_IN, PD2_IN, PD1_IN, PD0_IN, + PE5_IN, PE4_IN, PE3_IN, PE2_IN, PE1_IN, PE0_IN, + PF7_IN, PF6_IN, PF5_IN, PF4_IN, + PF3_IN, PF2_IN, PF1_IN, PF0_IN, + PG7_IN, PG6_IN, PG5_IN, PG4_IN, + PG3_IN, PG2_IN, PG1_IN, PG0_IN, + PH7_IN, PH6_IN, PH5_IN, PH4_IN, + PH3_IN, PH2_IN, PH1_IN, PH0_IN, + PJ7_IN, PJ6_IN, PJ5_IN, PJ4_IN, + PJ3_IN, PJ2_IN, PJ1_IN, PJ0_IN, + PK7_IN, PK6_IN, PK5_IN, PK4_IN, + PK3_IN, PK2_IN, PK1_IN, PK0_IN, + PL7_IN, PL6_IN, PL5_IN, PL4_IN, + PL3_IN, PL2_IN, PL1_IN, PL0_IN, + PM1_IN, PM0_IN, + PN7_IN, PN6_IN, PN5_IN, PN4_IN, + PN3_IN, PN2_IN, PN1_IN, PN0_IN, + PP5_IN, PP4_IN, PP3_IN, PP2_IN, PP1_IN, PP0_IN, + PQ4_IN, PQ3_IN, PQ2_IN, PQ1_IN, PQ0_IN, + PR3_IN, PR2_IN, PR1_IN, PR0_IN, + PINMUX_INPUT_END, + + PINMUX_INPUT_PULLUP_BEGIN, + PA7_IN_PU, PA6_IN_PU, PA5_IN_PU, PA4_IN_PU, + PA3_IN_PU, PA2_IN_PU, PA1_IN_PU, PA0_IN_PU, + PB7_IN_PU, PB6_IN_PU, PB5_IN_PU, PB4_IN_PU, + PB3_IN_PU, PB2_IN_PU, PB1_IN_PU, PB0_IN_PU, + PC7_IN_PU, PC6_IN_PU, PC5_IN_PU, PC4_IN_PU, + PC3_IN_PU, PC2_IN_PU, PC1_IN_PU, PC0_IN_PU, + PD7_IN_PU, PD6_IN_PU, PD5_IN_PU, PD4_IN_PU, + PD3_IN_PU, PD2_IN_PU, PD1_IN_PU, PD0_IN_PU, + PE5_IN_PU, PE4_IN_PU, PE3_IN_PU, PE2_IN_PU, PE1_IN_PU, PE0_IN_PU, + PF7_IN_PU, PF6_IN_PU, PF5_IN_PU, PF4_IN_PU, + PF3_IN_PU, PF2_IN_PU, PF1_IN_PU, PF0_IN_PU, + PG7_IN_PU, PG6_IN_PU, PG5_IN_PU, PG4_IN_PU, + PG3_IN_PU, PG2_IN_PU, PG1_IN_PU, PG0_IN_PU, + PH7_IN_PU, PH6_IN_PU, PH5_IN_PU, PH4_IN_PU, + PH3_IN_PU, PH2_IN_PU, PH1_IN_PU, PH0_IN_PU, + PJ7_IN_PU, PJ6_IN_PU, PJ5_IN_PU, PJ4_IN_PU, + PJ3_IN_PU, PJ2_IN_PU, PJ1_IN_PU, PJ0_IN_PU, + PK7_IN_PU, PK6_IN_PU, PK5_IN_PU, PK4_IN_PU, + PK3_IN_PU, PK2_IN_PU, PK1_IN_PU, PK0_IN_PU, + PL7_IN_PU, PL6_IN_PU, PL5_IN_PU, PL4_IN_PU, + PL3_IN_PU, PL2_IN_PU, PL1_IN_PU, PL0_IN_PU, + PM1_IN_PU, PM0_IN_PU, + PN7_IN_PU, PN6_IN_PU, PN5_IN_PU, PN4_IN_PU, + PN3_IN_PU, PN2_IN_PU, PN1_IN_PU, PN0_IN_PU, + PP5_IN_PU, PP4_IN_PU, PP3_IN_PU, PP2_IN_PU, PP1_IN_PU, PP0_IN_PU, + PQ4_IN_PU, PQ3_IN_PU, PQ2_IN_PU, PQ1_IN_PU, PQ0_IN_PU, + PR3_IN_PU, PR2_IN_PU, PR1_IN_PU, PR0_IN_PU, + PINMUX_INPUT_PULLUP_END, + + PINMUX_OUTPUT_BEGIN, + PA7_OUT, PA6_OUT, PA5_OUT, PA4_OUT, + PA3_OUT, PA2_OUT, PA1_OUT, PA0_OUT, + PB7_OUT, PB6_OUT, PB5_OUT, PB4_OUT, + PB3_OUT, PB2_OUT, PB1_OUT, PB0_OUT, + PC7_OUT, PC6_OUT, PC5_OUT, PC4_OUT, + PC3_OUT, PC2_OUT, PC1_OUT, PC0_OUT, + PD7_OUT, PD6_OUT, PD5_OUT, PD4_OUT, + PD3_OUT, PD2_OUT, PD1_OUT, PD0_OUT, + PE5_OUT, PE4_OUT, PE3_OUT, PE2_OUT, PE1_OUT, PE0_OUT, + PF7_OUT, PF6_OUT, PF5_OUT, PF4_OUT, + PF3_OUT, PF2_OUT, PF1_OUT, PF0_OUT, + PG7_OUT, PG6_OUT, PG5_OUT, PG4_OUT, + PG3_OUT, PG2_OUT, PG1_OUT, PG0_OUT, + PH7_OUT, PH6_OUT, PH5_OUT, PH4_OUT, + PH3_OUT, PH2_OUT, PH1_OUT, PH0_OUT, + PJ7_OUT, PJ6_OUT, PJ5_OUT, PJ4_OUT, + PJ3_OUT, PJ2_OUT, PJ1_OUT, PJ0_OUT, + PK7_OUT, PK6_OUT, PK5_OUT, PK4_OUT, + PK3_OUT, PK2_OUT, PK1_OUT, PK0_OUT, + PL7_OUT, PL6_OUT, PL5_OUT, PL4_OUT, + PL3_OUT, PL2_OUT, PL1_OUT, PL0_OUT, + PM1_OUT, PM0_OUT, + PN7_OUT, PN6_OUT, PN5_OUT, PN4_OUT, + PN3_OUT, PN2_OUT, PN1_OUT, PN0_OUT, + PP5_OUT, PP4_OUT, PP3_OUT, PP2_OUT, PP1_OUT, PP0_OUT, + PQ4_OUT, PQ3_OUT, PQ2_OUT, PQ1_OUT, PQ0_OUT, + PR3_OUT, PR2_OUT, PR1_OUT, PR0_OUT, + PINMUX_OUTPUT_END, + + PINMUX_FUNCTION_BEGIN, + PA7_FN, PA6_FN, PA5_FN, PA4_FN, + PA3_FN, PA2_FN, PA1_FN, PA0_FN, + PB7_FN, PB6_FN, PB5_FN, PB4_FN, + PB3_FN, PB2_FN, PB1_FN, PB0_FN, + PC7_FN, PC6_FN, PC5_FN, PC4_FN, + PC3_FN, PC2_FN, PC1_FN, PC0_FN, + PD7_FN, PD6_FN, PD5_FN, PD4_FN, + PD3_FN, PD2_FN, PD1_FN, PD0_FN, + PE5_FN, PE4_FN, PE3_FN, PE2_FN, PE1_FN, PE0_FN, + PF7_FN, PF6_FN, PF5_FN, PF4_FN, + PF3_FN, PF2_FN, PF1_FN, PF0_FN, + PG7_FN, PG6_FN, PG5_FN, PG4_FN, + PG3_FN, PG2_FN, PG1_FN, PG0_FN, + PH7_FN, PH6_FN, PH5_FN, PH4_FN, + PH3_FN, PH2_FN, PH1_FN, PH0_FN, + PJ7_FN, PJ6_FN, PJ5_FN, PJ4_FN, + PJ3_FN, PJ2_FN, PJ1_FN, PJ0_FN, + PK7_FN, PK6_FN, PK5_FN, PK4_FN, + PK3_FN, PK2_FN, PK1_FN, PK0_FN, + PL7_FN, PL6_FN, PL5_FN, PL4_FN, + PL3_FN, PL2_FN, PL1_FN, PL0_FN, + PM1_FN, PM0_FN, + PN7_FN, PN6_FN, PN5_FN, PN4_FN, + PN3_FN, PN2_FN, PN1_FN, PN0_FN, + PP5_FN, PP4_FN, PP3_FN, PP2_FN, PP1_FN, PP0_FN, + PQ4_FN, PQ3_FN, PQ2_FN, PQ1_FN, PQ0_FN, + PR3_FN, PR2_FN, PR1_FN, PR0_FN, + P1MSEL15_0, P1MSEL15_1, + P1MSEL14_0, P1MSEL14_1, + P1MSEL13_0, P1MSEL13_1, + P1MSEL12_0, P1MSEL12_1, + P1MSEL11_0, P1MSEL11_1, + P1MSEL10_0, P1MSEL10_1, + P1MSEL9_0, P1MSEL9_1, + P1MSEL8_0, P1MSEL8_1, + P1MSEL7_0, P1MSEL7_1, + P1MSEL6_0, P1MSEL6_1, + P1MSEL5_0, + P1MSEL4_0, P1MSEL4_1, + P1MSEL3_0, P1MSEL3_1, + P1MSEL2_0, P1MSEL2_1, + P1MSEL1_0, P1MSEL1_1, + P1MSEL0_0, P1MSEL0_1, + P2MSEL2_0, P2MSEL2_1, + P2MSEL1_0, P2MSEL1_1, + P2MSEL0_0, P2MSEL0_1, + PINMUX_FUNCTION_END, + + PINMUX_MARK_BEGIN, + D63_AD31_MARK, + D62_AD30_MARK, + D61_AD29_MARK, + D60_AD28_MARK, + D59_AD27_MARK, + D58_AD26_MARK, + D57_AD25_MARK, + D56_AD24_MARK, + D55_AD23_MARK, + D54_AD22_MARK, + D53_AD21_MARK, + D52_AD20_MARK, + D51_AD19_MARK, + D50_AD18_MARK, + D49_AD17_DB5_MARK, + D48_AD16_DB4_MARK, + D47_AD15_DB3_MARK, + D46_AD14_DB2_MARK, + D45_AD13_DB1_MARK, + D44_AD12_DB0_MARK, + D43_AD11_DG5_MARK, + D42_AD10_DG4_MARK, + D41_AD9_DG3_MARK, + D40_AD8_DG2_MARK, + D39_AD7_DG1_MARK, + D38_AD6_DG0_MARK, + D37_AD5_DR5_MARK, + D36_AD4_DR4_MARK, + D35_AD3_DR3_MARK, + D34_AD2_DR2_MARK, + D33_AD1_DR1_MARK, + D32_AD0_DR0_MARK, + REQ1_MARK, + REQ2_MARK, + REQ3_MARK, + GNT1_MARK, + GNT2_MARK, + GNT3_MARK, + MMCCLK_MARK, + D31_MARK, + D30_MARK, + D29_MARK, + D28_MARK, + D27_MARK, + D26_MARK, + D25_MARK, + D24_MARK, + D23_MARK, + D22_MARK, + D21_MARK, + D20_MARK, + D19_MARK, + D18_MARK, + D17_MARK, + D16_MARK, + SCIF1_SCK_MARK, + SCIF1_RXD_MARK, + SCIF1_TXD_MARK, + SCIF0_CTS_MARK, + INTD_MARK, + FCE_MARK, + SCIF0_RTS_MARK, + HSPI_CS_MARK, + FSE_MARK, + SCIF0_SCK_MARK, + HSPI_CLK_MARK, + FRE_MARK, + SCIF0_RXD_MARK, + HSPI_RX_MARK, + FRB_MARK, + SCIF0_TXD_MARK, + HSPI_TX_MARK, + FWE_MARK, + SCIF5_TXD_MARK, + HAC1_SYNC_MARK, + SSI1_WS_MARK, + SIOF_TXD_PJ_MARK, + HAC0_SDOUT_MARK, + SSI0_SDATA_MARK, + SIOF_RXD_PJ_MARK, + HAC0_SDIN_MARK, + SSI0_SCK_MARK, + SIOF_SYNC_PJ_MARK, + HAC0_SYNC_MARK, + SSI0_WS_MARK, + SIOF_MCLK_PJ_MARK, + HAC_RES_MARK, + SIOF_SCK_PJ_MARK, + HAC0_BITCLK_MARK, + SSI0_CLK_MARK, + HAC1_BITCLK_MARK, + SSI1_CLK_MARK, + TCLK_MARK, + IOIS16_MARK, + STATUS0_MARK, + DRAK0_PK3_MARK, + STATUS1_MARK, + DRAK1_PK2_MARK, + DACK2_MARK, + SCIF2_TXD_MARK, + MMCCMD_MARK, + SIOF_TXD_PK_MARK, + DACK3_MARK, + SCIF2_SCK_MARK, + MMCDAT_MARK, + SIOF_SCK_PK_MARK, + DREQ0_MARK, + DREQ1_MARK, + DRAK0_PK1_MARK, + DRAK1_PK0_MARK, + DREQ2_MARK, + INTB_MARK, + DREQ3_MARK, + INTC_MARK, + DRAK2_MARK, + CE2A_MARK, + IRL4_MARK, + FD4_MARK, + IRL5_MARK, + FD5_MARK, + IRL6_MARK, + FD6_MARK, + IRL7_MARK, + FD7_MARK, + DRAK3_MARK, + CE2B_MARK, + BREQ_BSACK_MARK, + BACK_BSREQ_MARK, + SCIF5_RXD_MARK, + HAC1_SDIN_MARK, + SSI1_SCK_MARK, + SCIF5_SCK_MARK, + HAC1_SDOUT_MARK, + SSI1_SDATA_MARK, + SCIF3_TXD_MARK, + FCLE_MARK, + SCIF3_RXD_MARK, + FALE_MARK, + SCIF3_SCK_MARK, + FD0_MARK, + SCIF4_TXD_MARK, + FD1_MARK, + SCIF4_RXD_MARK, + FD2_MARK, + SCIF4_SCK_MARK, + FD3_MARK, + DEVSEL_DCLKOUT_MARK, + STOP_CDE_MARK, + LOCK_ODDF_MARK, + TRDY_DISPL_MARK, + IRDY_HSYNC_MARK, + PCIFRAME_VSYNC_MARK, + INTA_MARK, + GNT0_GNTIN_MARK, + REQ0_REQOUT_MARK, + PERR_MARK, + SERR_MARK, + WE7_CBE3_MARK, + WE6_CBE2_MARK, + WE5_CBE1_MARK, + WE4_CBE0_MARK, + SCIF2_RXD_MARK, + SIOF_RXD_MARK, + MRESETOUT_MARK, + IRQOUT_MARK, + PINMUX_MARK_END, +}; + +static pinmux_enum_t pinmux_data[] = { + + /* PA GPIO */ + PINMUX_DATA(PA7_DATA, PA7_IN, PA7_OUT, PA7_IN_PU), + PINMUX_DATA(PA6_DATA, PA6_IN, PA6_OUT, PA6_IN_PU), + PINMUX_DATA(PA5_DATA, PA5_IN, PA5_OUT, PA5_IN_PU), + PINMUX_DATA(PA4_DATA, PA4_IN, PA4_OUT, PA4_IN_PU), + PINMUX_DATA(PA3_DATA, PA3_IN, PA3_OUT, PA3_IN_PU), + PINMUX_DATA(PA2_DATA, PA2_IN, PA2_OUT, PA2_IN_PU), + PINMUX_DATA(PA1_DATA, PA1_IN, PA1_OUT, PA1_IN_PU), + PINMUX_DATA(PA0_DATA, PA0_IN, PA0_OUT, PA0_IN_PU), + + /* PB GPIO */ + PINMUX_DATA(PB7_DATA, PB7_IN, PB7_OUT, PB7_IN_PU), + PINMUX_DATA(PB6_DATA, PB6_IN, PB6_OUT, PB6_IN_PU), + PINMUX_DATA(PB5_DATA, PB5_IN, PB5_OUT, PB5_IN_PU), + PINMUX_DATA(PB4_DATA, PB4_IN, PB4_OUT, PB4_IN_PU), + PINMUX_DATA(PB3_DATA, PB3_IN, PB3_OUT, PB3_IN_PU), + PINMUX_DATA(PB2_DATA, PB2_IN, PB2_OUT, PB2_IN_PU), + PINMUX_DATA(PB1_DATA, PB1_IN, PB1_OUT, PB1_IN_PU), + PINMUX_DATA(PB0_DATA, PB0_IN, PB0_OUT, PB0_IN_PU), + + /* PC GPIO */ + PINMUX_DATA(PC7_DATA, PC7_IN, PC7_OUT, PC7_IN_PU), + PINMUX_DATA(PC6_DATA, PC6_IN, PC6_OUT, PC6_IN_PU), + PINMUX_DATA(PC5_DATA, PC5_IN, PC5_OUT, PC5_IN_PU), + PINMUX_DATA(PC4_DATA, PC4_IN, PC4_OUT, PC4_IN_PU), + PINMUX_DATA(PC3_DATA, PC3_IN, PC3_OUT, PC3_IN_PU), + PINMUX_DATA(PC2_DATA, PC2_IN, PC2_OUT, PC2_IN_PU), + PINMUX_DATA(PC1_DATA, PC1_IN, PC1_OUT, PC1_IN_PU), + PINMUX_DATA(PC0_DATA, PC0_IN, PC0_OUT, PC0_IN_PU), + + /* PD GPIO */ + PINMUX_DATA(PD7_DATA, PD7_IN, PD7_OUT, PD7_IN_PU), + PINMUX_DATA(PD6_DATA, PD6_IN, PD6_OUT, PD6_IN_PU), + PINMUX_DATA(PD5_DATA, PD5_IN, PD5_OUT, PD5_IN_PU), + PINMUX_DATA(PD4_DATA, PD4_IN, PD4_OUT, PD4_IN_PU), + PINMUX_DATA(PD3_DATA, PD3_IN, PD3_OUT, PD3_IN_PU), + PINMUX_DATA(PD2_DATA, PD2_IN, PD2_OUT, PD2_IN_PU), + PINMUX_DATA(PD1_DATA, PD1_IN, PD1_OUT, PD1_IN_PU), + PINMUX_DATA(PD0_DATA, PD0_IN, PD0_OUT, PD0_IN_PU), + + /* PE GPIO */ + PINMUX_DATA(PE5_DATA, PE5_IN, PE5_OUT, PE5_IN_PU), + PINMUX_DATA(PE4_DATA, PE4_IN, PE4_OUT, PE4_IN_PU), + PINMUX_DATA(PE3_DATA, PE3_IN, PE3_OUT, PE3_IN_PU), + PINMUX_DATA(PE2_DATA, PE2_IN, PE2_OUT, PE2_IN_PU), + PINMUX_DATA(PE1_DATA, PE1_IN, PE1_OUT, PE1_IN_PU), + PINMUX_DATA(PE0_DATA, PE0_IN, PE0_OUT, PE0_IN_PU), + + /* PF GPIO */ + PINMUX_DATA(PF7_DATA, PF7_IN, PF7_OUT, PF7_IN_PU), + PINMUX_DATA(PF6_DATA, PF6_IN, PF6_OUT, PF6_IN_PU), + PINMUX_DATA(PF5_DATA, PF5_IN, PF5_OUT, PF5_IN_PU), + PINMUX_DATA(PF4_DATA, PF4_IN, PF4_OUT, PF4_IN_PU), + PINMUX_DATA(PF3_DATA, PF3_IN, PF3_OUT, PF3_IN_PU), + PINMUX_DATA(PF2_DATA, PF2_IN, PF2_OUT, PF2_IN_PU), + PINMUX_DATA(PF1_DATA, PF1_IN, PF1_OUT, PF1_IN_PU), + PINMUX_DATA(PF0_DATA, PF0_IN, PF0_OUT, PF0_IN_PU), + + /* PG GPIO */ + PINMUX_DATA(PG7_DATA, PG7_IN, PG7_OUT, PG7_IN_PU), + PINMUX_DATA(PG6_DATA, PG6_IN, PG6_OUT, PG6_IN_PU), + PINMUX_DATA(PG5_DATA, PG5_IN, PG5_OUT, PG5_IN_PU), + PINMUX_DATA(PG4_DATA, PG4_IN, PG4_OUT, PG4_IN_PU), + PINMUX_DATA(PG3_DATA, PG3_IN, PG3_OUT, PG3_IN_PU), + PINMUX_DATA(PG2_DATA, PG2_IN, PG2_OUT, PG2_IN_PU), + PINMUX_DATA(PG1_DATA, PG1_IN, PG1_OUT, PG1_IN_PU), + PINMUX_DATA(PG0_DATA, PG0_IN, PG0_OUT, PG0_IN_PU), + + /* PH GPIO */ + PINMUX_DATA(PH7_DATA, PH7_IN, PH7_OUT, PH7_IN_PU), + PINMUX_DATA(PH6_DATA, PH6_IN, PH6_OUT, PH6_IN_PU), + PINMUX_DATA(PH5_DATA, PH5_IN, PH5_OUT, PH5_IN_PU), + PINMUX_DATA(PH4_DATA, PH4_IN, PH4_OUT, PH4_IN_PU), + PINMUX_DATA(PH3_DATA, PH3_IN, PH3_OUT, PH3_IN_PU), + PINMUX_DATA(PH2_DATA, PH2_IN, PH2_OUT, PH2_IN_PU), + PINMUX_DATA(PH1_DATA, PH1_IN, PH1_OUT, PH1_IN_PU), + PINMUX_DATA(PH0_DATA, PH0_IN, PH0_OUT, PH0_IN_PU), + + /* PJ GPIO */ + PINMUX_DATA(PJ7_DATA, PJ7_IN, PJ7_OUT, PJ7_IN_PU), + PINMUX_DATA(PJ6_DATA, PJ6_IN, PJ6_OUT, PJ6_IN_PU), + PINMUX_DATA(PJ5_DATA, PJ5_IN, PJ5_OUT, PJ5_IN_PU), + PINMUX_DATA(PJ4_DATA, PJ4_IN, PJ4_OUT, PJ4_IN_PU), + PINMUX_DATA(PJ3_DATA, PJ3_IN, PJ3_OUT, PJ3_IN_PU), + PINMUX_DATA(PJ2_DATA, PJ2_IN, PJ2_OUT, PJ2_IN_PU), + PINMUX_DATA(PJ1_DATA, PJ1_IN, PJ1_OUT, PJ1_IN_PU), + PINMUX_DATA(PJ0_DATA, PJ0_IN, PJ0_OUT, PJ0_IN_PU), + + /* PK GPIO */ + PINMUX_DATA(PK7_DATA, PK7_IN, PK7_OUT, PK7_IN_PU), + PINMUX_DATA(PK6_DATA, PK6_IN, PK6_OUT, PK6_IN_PU), + PINMUX_DATA(PK5_DATA, PK5_IN, PK5_OUT, PK5_IN_PU), + PINMUX_DATA(PK4_DATA, PK4_IN, PK4_OUT, PK4_IN_PU), + PINMUX_DATA(PK3_DATA, PK3_IN, PK3_OUT, PK3_IN_PU), + PINMUX_DATA(PK2_DATA, PK2_IN, PK2_OUT, PK2_IN_PU), + PINMUX_DATA(PK1_DATA, PK1_IN, PK1_OUT, PK1_IN_PU), + PINMUX_DATA(PK0_DATA, PK0_IN, PK0_OUT, PK0_IN_PU), + + /* PL GPIO */ + PINMUX_DATA(PL7_DATA, PL7_IN, PL7_OUT, PL7_IN_PU), + PINMUX_DATA(PL6_DATA, PL6_IN, PL6_OUT, PL6_IN_PU), + PINMUX_DATA(PL5_DATA, PL5_IN, PL5_OUT, PL5_IN_PU), + PINMUX_DATA(PL4_DATA, PL4_IN, PL4_OUT, PL4_IN_PU), + PINMUX_DATA(PL3_DATA, PL3_IN, PL3_OUT, PL3_IN_PU), + PINMUX_DATA(PL2_DATA, PL2_IN, PL2_OUT, PL2_IN_PU), + PINMUX_DATA(PL1_DATA, PL1_IN, PL1_OUT, PL1_IN_PU), + PINMUX_DATA(PL0_DATA, PL0_IN, PL0_OUT, PL0_IN_PU), + + /* PM GPIO */ + PINMUX_DATA(PM1_DATA, PM1_IN, PM1_OUT, PM1_IN_PU), + PINMUX_DATA(PM0_DATA, PM0_IN, PM0_OUT, PM0_IN_PU), + + /* PN GPIO */ + PINMUX_DATA(PN7_DATA, PN7_IN, PN7_OUT, PN7_IN_PU), + PINMUX_DATA(PN6_DATA, PN6_IN, PN6_OUT, PN6_IN_PU), + PINMUX_DATA(PN5_DATA, PN5_IN, PN5_OUT, PN5_IN_PU), + PINMUX_DATA(PN4_DATA, PN4_IN, PN4_OUT, PN4_IN_PU), + PINMUX_DATA(PN3_DATA, PN3_IN, PN3_OUT, PN3_IN_PU), + PINMUX_DATA(PN2_DATA, PN2_IN, PN2_OUT, PN2_IN_PU), + PINMUX_DATA(PN1_DATA, PN1_IN, PN1_OUT, PN1_IN_PU), + PINMUX_DATA(PN0_DATA, PN0_IN, PN0_OUT, PN0_IN_PU), + + /* PP GPIO */ + PINMUX_DATA(PP5_DATA, PP5_IN, PP5_OUT, PP5_IN_PU), + PINMUX_DATA(PP4_DATA, PP4_IN, PP4_OUT, PP4_IN_PU), + PINMUX_DATA(PP3_DATA, PP3_IN, PP3_OUT, PP3_IN_PU), + PINMUX_DATA(PP2_DATA, PP2_IN, PP2_OUT, PP2_IN_PU), + PINMUX_DATA(PP1_DATA, PP1_IN, PP1_OUT, PP1_IN_PU), + PINMUX_DATA(PP0_DATA, PP0_IN, PP0_OUT, PP0_IN_PU), + + /* PQ GPIO */ + PINMUX_DATA(PQ4_DATA, PQ4_IN, PQ4_OUT, PQ4_IN_PU), + PINMUX_DATA(PQ3_DATA, PQ3_IN, PQ3_OUT, PQ3_IN_PU), + PINMUX_DATA(PQ2_DATA, PQ2_IN, PQ2_OUT, PQ2_IN_PU), + PINMUX_DATA(PQ1_DATA, PQ1_IN, PQ1_OUT, PQ1_IN_PU), + PINMUX_DATA(PQ0_DATA, PQ0_IN, PQ0_OUT, PQ0_IN_PU), + + /* PR GPIO */ + PINMUX_DATA(PR3_DATA, PR3_IN, PR3_OUT, PR3_IN_PU), + PINMUX_DATA(PR2_DATA, PR2_IN, PR2_OUT, PR2_IN_PU), + PINMUX_DATA(PR1_DATA, PR1_IN, PR1_OUT, PR1_IN_PU), + PINMUX_DATA(PR0_DATA, PR0_IN, PR0_OUT, PR0_IN_PU), + + /* PA FN */ + PINMUX_DATA(D63_AD31_MARK, PA7_FN), + PINMUX_DATA(D62_AD30_MARK, PA6_FN), + PINMUX_DATA(D61_AD29_MARK, PA5_FN), + PINMUX_DATA(D60_AD28_MARK, PA4_FN), + PINMUX_DATA(D59_AD27_MARK, PA3_FN), + PINMUX_DATA(D58_AD26_MARK, PA2_FN), + PINMUX_DATA(D57_AD25_MARK, PA1_FN), + PINMUX_DATA(D56_AD24_MARK, PA0_FN), + + /* PB FN */ + PINMUX_DATA(D55_AD23_MARK, PB7_FN), + PINMUX_DATA(D54_AD22_MARK, PB6_FN), + PINMUX_DATA(D53_AD21_MARK, PB5_FN), + PINMUX_DATA(D52_AD20_MARK, PB4_FN), + PINMUX_DATA(D51_AD19_MARK, PB3_FN), + PINMUX_DATA(D50_AD18_MARK, PB2_FN), + PINMUX_DATA(D49_AD17_DB5_MARK, PB1_FN), + PINMUX_DATA(D48_AD16_DB4_MARK, PB0_FN), + + /* PC FN */ + PINMUX_DATA(D47_AD15_DB3_MARK, PC7_FN), + PINMUX_DATA(D46_AD14_DB2_MARK, PC6_FN), + PINMUX_DATA(D45_AD13_DB1_MARK, PC5_FN), + PINMUX_DATA(D44_AD12_DB0_MARK, PC4_FN), + PINMUX_DATA(D43_AD11_DG5_MARK, PC3_FN), + PINMUX_DATA(D42_AD10_DG4_MARK, PC2_FN), + PINMUX_DATA(D41_AD9_DG3_MARK, PC1_FN), + PINMUX_DATA(D40_AD8_DG2_MARK, PC0_FN), + + /* PD FN */ + PINMUX_DATA(D39_AD7_DG1_MARK, PD7_FN), + PINMUX_DATA(D38_AD6_DG0_MARK, PD6_FN), + PINMUX_DATA(D37_AD5_DR5_MARK, PD5_FN), + PINMUX_DATA(D36_AD4_DR4_MARK, PD4_FN), + PINMUX_DATA(D35_AD3_DR3_MARK, PD3_FN), + PINMUX_DATA(D34_AD2_DR2_MARK, PD2_FN), + PINMUX_DATA(D33_AD1_DR1_MARK, PD1_FN), + PINMUX_DATA(D32_AD0_DR0_MARK, PD0_FN), + + /* PE FN */ + PINMUX_DATA(REQ1_MARK, PE5_FN), + PINMUX_DATA(REQ2_MARK, PE4_FN), + PINMUX_DATA(REQ3_MARK, P2MSEL0_0, PE3_FN), + PINMUX_DATA(GNT1_MARK, PE2_FN), + PINMUX_DATA(GNT2_MARK, PE1_FN), + PINMUX_DATA(GNT3_MARK, P2MSEL0_0, PE0_FN), + PINMUX_DATA(MMCCLK_MARK, P2MSEL0_1, PE0_FN), + + /* PF FN */ + PINMUX_DATA(D31_MARK, PF7_FN), + PINMUX_DATA(D30_MARK, PF6_FN), + PINMUX_DATA(D29_MARK, PF5_FN), + PINMUX_DATA(D28_MARK, PF4_FN), + PINMUX_DATA(D27_MARK, PF3_FN), + PINMUX_DATA(D26_MARK, PF2_FN), + PINMUX_DATA(D25_MARK, PF1_FN), + PINMUX_DATA(D24_MARK, PF0_FN), + + /* PF FN */ + PINMUX_DATA(D23_MARK, PG7_FN), + PINMUX_DATA(D22_MARK, PG6_FN), + PINMUX_DATA(D21_MARK, PG5_FN), + PINMUX_DATA(D20_MARK, PG4_FN), + PINMUX_DATA(D19_MARK, PG3_FN), + PINMUX_DATA(D18_MARK, PG2_FN), + PINMUX_DATA(D17_MARK, PG1_FN), + PINMUX_DATA(D16_MARK, PG0_FN), + + /* PH FN */ + PINMUX_DATA(SCIF1_SCK_MARK, PH7_FN), + PINMUX_DATA(SCIF1_RXD_MARK, PH6_FN), + PINMUX_DATA(SCIF1_TXD_MARK, PH5_FN), + PINMUX_DATA(SCIF0_CTS_MARK, PH4_FN), + PINMUX_DATA(INTD_MARK, P1MSEL7_1, PH4_FN), + PINMUX_DATA(FCE_MARK, P1MSEL8_1, P1MSEL7_0, PH4_FN), + PINMUX_DATA(SCIF0_RTS_MARK, P1MSEL8_0, P1MSEL7_0, PH3_FN), + PINMUX_DATA(HSPI_CS_MARK, P1MSEL8_0, P1MSEL7_1, PH3_FN), + PINMUX_DATA(FSE_MARK, P1MSEL8_1, P1MSEL7_0, PH3_FN), + PINMUX_DATA(SCIF0_SCK_MARK, P1MSEL8_0, P1MSEL7_0, PH2_FN), + PINMUX_DATA(HSPI_CLK_MARK, P1MSEL8_0, P1MSEL7_1, PH2_FN), + PINMUX_DATA(FRE_MARK, P1MSEL8_1, P1MSEL7_0, PH2_FN), + PINMUX_DATA(SCIF0_RXD_MARK, P1MSEL8_0, P1MSEL7_0, PH1_FN), + PINMUX_DATA(HSPI_RX_MARK, P1MSEL8_0, P1MSEL7_1, PH1_FN), + PINMUX_DATA(FRB_MARK, P1MSEL8_1, P1MSEL7_0, PH1_FN), + PINMUX_DATA(SCIF0_TXD_MARK, P1MSEL8_0, P1MSEL7_0, PH0_FN), + PINMUX_DATA(HSPI_TX_MARK, P1MSEL8_0, P1MSEL7_1, PH0_FN), + PINMUX_DATA(FWE_MARK, P1MSEL8_1, P1MSEL7_0, PH0_FN), + + /* PJ FN */ + PINMUX_DATA(SCIF5_TXD_MARK, P1MSEL2_0, P1MSEL1_0, PJ7_FN), + PINMUX_DATA(HAC1_SYNC_MARK, P1MSEL2_0, P1MSEL1_1, PJ7_FN), + PINMUX_DATA(SSI1_WS_MARK, P1MSEL2_1, P1MSEL1_0, PJ7_FN), + PINMUX_DATA(SIOF_TXD_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ6_FN), + PINMUX_DATA(HAC0_SDOUT_MARK, P1MSEL4_0, P1MSEL3_1, PJ6_FN), + PINMUX_DATA(SSI0_SDATA_MARK, P1MSEL4_1, P1MSEL3_0, PJ6_FN), + PINMUX_DATA(SIOF_RXD_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ5_FN), + PINMUX_DATA(HAC0_SDIN_MARK, P1MSEL4_0, P1MSEL3_1, PJ5_FN), + PINMUX_DATA(SSI0_SCK_MARK, P1MSEL4_1, P1MSEL3_0, PJ5_FN), + PINMUX_DATA(SIOF_SYNC_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ4_FN), + PINMUX_DATA(HAC0_SYNC_MARK, P1MSEL4_0, P1MSEL3_1, PJ4_FN), + PINMUX_DATA(SSI0_WS_MARK, P1MSEL4_1, P1MSEL3_0, PJ4_FN), + PINMUX_DATA(SIOF_MCLK_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ3_FN), + PINMUX_DATA(HAC_RES_MARK, P1MSEL4_0, P1MSEL3_1, PJ3_FN), + PINMUX_DATA(SIOF_SCK_PJ_MARK, P2MSEL1_0, P1MSEL4_0, P1MSEL3_0, PJ2_FN), + PINMUX_DATA(HAC0_BITCLK_MARK, P1MSEL4_0, P1MSEL3_1, PJ2_FN), + PINMUX_DATA(SSI0_CLK_MARK, P1MSEL4_1, P1MSEL3_0, PJ2_FN), + PINMUX_DATA(HAC1_BITCLK_MARK, P1MSEL2_0, PJ1_FN), + PINMUX_DATA(SSI1_CLK_MARK, P1MSEL2_1, P1MSEL1_0, PJ1_FN), + PINMUX_DATA(TCLK_MARK, P1MSEL9_0, PJ0_FN), + PINMUX_DATA(IOIS16_MARK, P1MSEL9_1, PJ0_FN), + + /* PK FN */ + PINMUX_DATA(STATUS0_MARK, P1MSEL15_0, PK7_FN), + PINMUX_DATA(DRAK0_PK3_MARK, P1MSEL15_1, PK7_FN), + PINMUX_DATA(STATUS1_MARK, P1MSEL15_0, PK6_FN), + PINMUX_DATA(DRAK1_PK2_MARK, P1MSEL15_1, PK6_FN), + PINMUX_DATA(DACK2_MARK, P1MSEL12_0, P1MSEL11_0, PK5_FN), + PINMUX_DATA(SCIF2_TXD_MARK, P1MSEL12_1, P1MSEL11_0, PK5_FN), + PINMUX_DATA(MMCCMD_MARK, P1MSEL12_1, P1MSEL11_1, PK5_FN), + PINMUX_DATA(SIOF_TXD_PK_MARK, P2MSEL1_1, + P1MSEL12_0, P1MSEL11_1, PK5_FN), + PINMUX_DATA(DACK3_MARK, P1MSEL12_0, P1MSEL11_0, PK4_FN), + PINMUX_DATA(SCIF2_SCK_MARK, P1MSEL12_1, P1MSEL11_0, PK4_FN), + PINMUX_DATA(MMCDAT_MARK, P1MSEL12_1, P1MSEL11_1, PK4_FN), + PINMUX_DATA(SIOF_SCK_PK_MARK, P2MSEL1_1, + P1MSEL12_0, P1MSEL11_1, PK4_FN), + PINMUX_DATA(DREQ0_MARK, PK3_FN), + PINMUX_DATA(DREQ1_MARK, PK2_FN), + PINMUX_DATA(DRAK0_PK1_MARK, PK1_FN), + PINMUX_DATA(DRAK1_PK0_MARK, PK0_FN), + + /* PL FN */ + PINMUX_DATA(DREQ2_MARK, P1MSEL13_0, PL7_FN), + PINMUX_DATA(INTB_MARK, P1MSEL13_1, PL7_FN), + PINMUX_DATA(DREQ3_MARK, P1MSEL13_0, PL6_FN), + PINMUX_DATA(INTC_MARK, P1MSEL13_1, PL6_FN), + PINMUX_DATA(DRAK2_MARK, P1MSEL10_0, PL5_FN), + PINMUX_DATA(CE2A_MARK, P1MSEL10_1, PL5_FN), + PINMUX_DATA(IRL4_MARK, P1MSEL14_0, PL4_FN), + PINMUX_DATA(FD4_MARK, P1MSEL14_1, PL4_FN), + PINMUX_DATA(IRL5_MARK, P1MSEL14_0, PL3_FN), + PINMUX_DATA(FD5_MARK, P1MSEL14_1, PL3_FN), + PINMUX_DATA(IRL6_MARK, P1MSEL14_0, PL2_FN), + PINMUX_DATA(FD6_MARK, P1MSEL14_1, PL2_FN), + PINMUX_DATA(IRL7_MARK, P1MSEL14_0, PL1_FN), + PINMUX_DATA(FD7_MARK, P1MSEL14_1, PL1_FN), + PINMUX_DATA(DRAK3_MARK, P1MSEL10_0, PL0_FN), + PINMUX_DATA(CE2B_MARK, P1MSEL10_1, PL0_FN), + + /* PM FN */ + PINMUX_DATA(BREQ_BSACK_MARK, PM1_FN), + PINMUX_DATA(BACK_BSREQ_MARK, PM0_FN), + + /* PN FN */ + PINMUX_DATA(SCIF5_RXD_MARK, P1MSEL2_0, P1MSEL1_0, PN7_FN), + PINMUX_DATA(HAC1_SDIN_MARK, P1MSEL2_0, P1MSEL1_1, PN7_FN), + PINMUX_DATA(SSI1_SCK_MARK, P1MSEL2_1, P1MSEL1_0, PN7_FN), + PINMUX_DATA(SCIF5_SCK_MARK, P1MSEL2_0, P1MSEL1_0, PN6_FN), + PINMUX_DATA(HAC1_SDOUT_MARK, P1MSEL2_0, P1MSEL1_1, PN6_FN), + PINMUX_DATA(SSI1_SDATA_MARK, P1MSEL2_1, P1MSEL1_0, PN6_FN), + PINMUX_DATA(SCIF3_TXD_MARK, P1MSEL0_0, PN5_FN), + PINMUX_DATA(FCLE_MARK, P1MSEL0_1, PN5_FN), + PINMUX_DATA(SCIF3_RXD_MARK, P1MSEL0_0, PN4_FN), + PINMUX_DATA(FALE_MARK, P1MSEL0_1, PN4_FN), + PINMUX_DATA(SCIF3_SCK_MARK, P1MSEL0_0, PN3_FN), + PINMUX_DATA(FD0_MARK, P1MSEL0_1, PN3_FN), + PINMUX_DATA(SCIF4_TXD_MARK, P1MSEL0_0, PN2_FN), + PINMUX_DATA(FD1_MARK, P1MSEL0_1, PN2_FN), + PINMUX_DATA(SCIF4_RXD_MARK, P1MSEL0_0, PN1_FN), + PINMUX_DATA(FD2_MARK, P1MSEL0_1, PN1_FN), + PINMUX_DATA(SCIF4_SCK_MARK, P1MSEL0_0, PN0_FN), + PINMUX_DATA(FD3_MARK, P1MSEL0_1, PN0_FN), + + /* PP FN */ + PINMUX_DATA(DEVSEL_DCLKOUT_MARK, PP5_FN), + PINMUX_DATA(STOP_CDE_MARK, PP4_FN), + PINMUX_DATA(LOCK_ODDF_MARK, PP3_FN), + PINMUX_DATA(TRDY_DISPL_MARK, PP2_FN), + PINMUX_DATA(IRDY_HSYNC_MARK, PP1_FN), + PINMUX_DATA(PCIFRAME_VSYNC_MARK, PP0_FN), + + /* PQ FN */ + PINMUX_DATA(INTA_MARK, PQ4_FN), + PINMUX_DATA(GNT0_GNTIN_MARK, PQ3_FN), + PINMUX_DATA(REQ0_REQOUT_MARK, PQ2_FN), + PINMUX_DATA(PERR_MARK, PQ1_FN), + PINMUX_DATA(SERR_MARK, PQ0_FN), + + /* PR FN */ + PINMUX_DATA(WE7_CBE3_MARK, PR3_FN), + PINMUX_DATA(WE6_CBE2_MARK, PR2_FN), + PINMUX_DATA(WE5_CBE1_MARK, PR1_FN), + PINMUX_DATA(WE4_CBE0_MARK, PR0_FN), + + /* MISC FN */ + PINMUX_DATA(SCIF2_RXD_MARK, P1MSEL6_0, P1MSEL5_0), + PINMUX_DATA(SIOF_RXD_MARK, P2MSEL1_1, P1MSEL6_1, P1MSEL5_0), + PINMUX_DATA(MRESETOUT_MARK, P2MSEL2_0), + PINMUX_DATA(IRQOUT_MARK, P2MSEL2_1), +}; + +static struct pinmux_gpio pinmux_gpios[] = { + /* PA */ + PINMUX_GPIO(GPIO_PA7, PA7_DATA), + PINMUX_GPIO(GPIO_PA6, PA6_DATA), + PINMUX_GPIO(GPIO_PA5, PA5_DATA), + PINMUX_GPIO(GPIO_PA4, PA4_DATA), + PINMUX_GPIO(GPIO_PA3, PA3_DATA), + PINMUX_GPIO(GPIO_PA2, PA2_DATA), + PINMUX_GPIO(GPIO_PA1, PA1_DATA), + PINMUX_GPIO(GPIO_PA0, PA0_DATA), + + /* PB */ + PINMUX_GPIO(GPIO_PB7, PB7_DATA), + PINMUX_GPIO(GPIO_PB6, PB6_DATA), + PINMUX_GPIO(GPIO_PB5, PB5_DATA), + PINMUX_GPIO(GPIO_PB4, PB4_DATA), + PINMUX_GPIO(GPIO_PB3, PB3_DATA), + PINMUX_GPIO(GPIO_PB2, PB2_DATA), + PINMUX_GPIO(GPIO_PB1, PB1_DATA), + PINMUX_GPIO(GPIO_PB0, PB0_DATA), + + /* PC */ + PINMUX_GPIO(GPIO_PC7, PC7_DATA), + PINMUX_GPIO(GPIO_PC6, PC6_DATA), + PINMUX_GPIO(GPIO_PC5, PC5_DATA), + PINMUX_GPIO(GPIO_PC4, PC4_DATA), + PINMUX_GPIO(GPIO_PC3, PC3_DATA), + PINMUX_GPIO(GPIO_PC2, PC2_DATA), + PINMUX_GPIO(GPIO_PC1, PC1_DATA), + PINMUX_GPIO(GPIO_PC0, PC0_DATA), + + /* PD */ + PINMUX_GPIO(GPIO_PD7, PD7_DATA), + PINMUX_GPIO(GPIO_PD6, PD6_DATA), + PINMUX_GPIO(GPIO_PD5, PD5_DATA), + PINMUX_GPIO(GPIO_PD4, PD4_DATA), + PINMUX_GPIO(GPIO_PD3, PD3_DATA), + PINMUX_GPIO(GPIO_PD2, PD2_DATA), + PINMUX_GPIO(GPIO_PD1, PD1_DATA), + PINMUX_GPIO(GPIO_PD0, PD0_DATA), + + /* PE */ + PINMUX_GPIO(GPIO_PE5, PE5_DATA), + PINMUX_GPIO(GPIO_PE4, PE4_DATA), + PINMUX_GPIO(GPIO_PE3, PE3_DATA), + PINMUX_GPIO(GPIO_PE2, PE2_DATA), + PINMUX_GPIO(GPIO_PE1, PE1_DATA), + PINMUX_GPIO(GPIO_PE0, PE0_DATA), + + /* PF */ + PINMUX_GPIO(GPIO_PF7, PF7_DATA), + PINMUX_GPIO(GPIO_PF6, PF6_DATA), + PINMUX_GPIO(GPIO_PF5, PF5_DATA), + PINMUX_GPIO(GPIO_PF4, PF4_DATA), + PINMUX_GPIO(GPIO_PF3, PF3_DATA), + PINMUX_GPIO(GPIO_PF2, PF2_DATA), + PINMUX_GPIO(GPIO_PF1, PF1_DATA), + PINMUX_GPIO(GPIO_PF0, PF0_DATA), + + /* PG */ + PINMUX_GPIO(GPIO_PG7, PG7_DATA), + PINMUX_GPIO(GPIO_PG6, PG6_DATA), + PINMUX_GPIO(GPIO_PG5, PG5_DATA), + PINMUX_GPIO(GPIO_PG4, PG4_DATA), + PINMUX_GPIO(GPIO_PG3, PG3_DATA), + PINMUX_GPIO(GPIO_PG2, PG2_DATA), + PINMUX_GPIO(GPIO_PG1, PG1_DATA), + PINMUX_GPIO(GPIO_PG0, PG0_DATA), + + /* PH */ + PINMUX_GPIO(GPIO_PH7, PH7_DATA), + PINMUX_GPIO(GPIO_PH6, PH6_DATA), + PINMUX_GPIO(GPIO_PH5, PH5_DATA), + PINMUX_GPIO(GPIO_PH4, PH4_DATA), + PINMUX_GPIO(GPIO_PH3, PH3_DATA), + PINMUX_GPIO(GPIO_PH2, PH2_DATA), + PINMUX_GPIO(GPIO_PH1, PH1_DATA), + PINMUX_GPIO(GPIO_PH0, PH0_DATA), + + /* PJ */ + PINMUX_GPIO(GPIO_PJ7, PJ7_DATA), + PINMUX_GPIO(GPIO_PJ6, PJ6_DATA), + PINMUX_GPIO(GPIO_PJ5, PJ5_DATA), + PINMUX_GPIO(GPIO_PJ4, PJ4_DATA), + PINMUX_GPIO(GPIO_PJ3, PJ3_DATA), + PINMUX_GPIO(GPIO_PJ2, PJ2_DATA), + PINMUX_GPIO(GPIO_PJ1, PJ1_DATA), + PINMUX_GPIO(GPIO_PJ0, PJ0_DATA), + + /* PK */ + PINMUX_GPIO(GPIO_PK7, PK7_DATA), + PINMUX_GPIO(GPIO_PK6, PK6_DATA), + PINMUX_GPIO(GPIO_PK5, PK5_DATA), + PINMUX_GPIO(GPIO_PK4, PK4_DATA), + PINMUX_GPIO(GPIO_PK3, PK3_DATA), + PINMUX_GPIO(GPIO_PK2, PK2_DATA), + PINMUX_GPIO(GPIO_PK1, PK1_DATA), + PINMUX_GPIO(GPIO_PK0, PK0_DATA), + + /* PL */ + PINMUX_GPIO(GPIO_PL7, PL7_DATA), + PINMUX_GPIO(GPIO_PL6, PL6_DATA), + PINMUX_GPIO(GPIO_PL5, PL5_DATA), + PINMUX_GPIO(GPIO_PL4, PL4_DATA), + PINMUX_GPIO(GPIO_PL3, PL3_DATA), + PINMUX_GPIO(GPIO_PL2, PL2_DATA), + PINMUX_GPIO(GPIO_PL1, PL1_DATA), + PINMUX_GPIO(GPIO_PL0, PL0_DATA), + + /* PM */ + PINMUX_GPIO(GPIO_PM1, PM1_DATA), + PINMUX_GPIO(GPIO_PM0, PM0_DATA), + + /* PN */ + PINMUX_GPIO(GPIO_PN7, PN7_DATA), + PINMUX_GPIO(GPIO_PN6, PN6_DATA), + PINMUX_GPIO(GPIO_PN5, PN5_DATA), + PINMUX_GPIO(GPIO_PN4, PN4_DATA), + PINMUX_GPIO(GPIO_PN3, PN3_DATA), + PINMUX_GPIO(GPIO_PN2, PN2_DATA), + PINMUX_GPIO(GPIO_PN1, PN1_DATA), + PINMUX_GPIO(GPIO_PN0, PN0_DATA), + + /* PP */ + PINMUX_GPIO(GPIO_PP5, PP5_DATA), + PINMUX_GPIO(GPIO_PP4, PP4_DATA), + PINMUX_GPIO(GPIO_PP3, PP3_DATA), + PINMUX_GPIO(GPIO_PP2, PP2_DATA), + PINMUX_GPIO(GPIO_PP1, PP1_DATA), + PINMUX_GPIO(GPIO_PP0, PP0_DATA), + + /* PQ */ + PINMUX_GPIO(GPIO_PQ4, PQ4_DATA), + PINMUX_GPIO(GPIO_PQ3, PQ3_DATA), + PINMUX_GPIO(GPIO_PQ2, PQ2_DATA), + PINMUX_GPIO(GPIO_PQ1, PQ1_DATA), + PINMUX_GPIO(GPIO_PQ0, PQ0_DATA), + + /* PR */ + PINMUX_GPIO(GPIO_PR3, PR3_DATA), + PINMUX_GPIO(GPIO_PR2, PR2_DATA), + PINMUX_GPIO(GPIO_PR1, PR1_DATA), + PINMUX_GPIO(GPIO_PR0, PR0_DATA), + + /* FN */ + PINMUX_GPIO(GPIO_FN_D63_AD31, D63_AD31_MARK), + PINMUX_GPIO(GPIO_FN_D62_AD30, D62_AD30_MARK), + PINMUX_GPIO(GPIO_FN_D61_AD29, D61_AD29_MARK), + PINMUX_GPIO(GPIO_FN_D60_AD28, D60_AD28_MARK), + PINMUX_GPIO(GPIO_FN_D59_AD27, D59_AD27_MARK), + PINMUX_GPIO(GPIO_FN_D58_AD26, D58_AD26_MARK), + PINMUX_GPIO(GPIO_FN_D57_AD25, D57_AD25_MARK), + PINMUX_GPIO(GPIO_FN_D56_AD24, D56_AD24_MARK), + PINMUX_GPIO(GPIO_FN_D55_AD23, D55_AD23_MARK), + PINMUX_GPIO(GPIO_FN_D54_AD22, D54_AD22_MARK), + PINMUX_GPIO(GPIO_FN_D53_AD21, D53_AD21_MARK), + PINMUX_GPIO(GPIO_FN_D52_AD20, D52_AD20_MARK), + PINMUX_GPIO(GPIO_FN_D51_AD19, D51_AD19_MARK), + PINMUX_GPIO(GPIO_FN_D50_AD18, D50_AD18_MARK), + PINMUX_GPIO(GPIO_FN_D49_AD17_DB5, D49_AD17_DB5_MARK), + PINMUX_GPIO(GPIO_FN_D48_AD16_DB4, D48_AD16_DB4_MARK), + PINMUX_GPIO(GPIO_FN_D47_AD15_DB3, D47_AD15_DB3_MARK), + PINMUX_GPIO(GPIO_FN_D46_AD14_DB2, D46_AD14_DB2_MARK), + PINMUX_GPIO(GPIO_FN_D45_AD13_DB1, D45_AD13_DB1_MARK), + PINMUX_GPIO(GPIO_FN_D44_AD12_DB0, D44_AD12_DB0_MARK), + PINMUX_GPIO(GPIO_FN_D43_AD11_DG5, D43_AD11_DG5_MARK), + PINMUX_GPIO(GPIO_FN_D42_AD10_DG4, D42_AD10_DG4_MARK), + PINMUX_GPIO(GPIO_FN_D41_AD9_DG3, D41_AD9_DG3_MARK), + PINMUX_GPIO(GPIO_FN_D40_AD8_DG2, D40_AD8_DG2_MARK), + PINMUX_GPIO(GPIO_FN_D39_AD7_DG1, D39_AD7_DG1_MARK), + PINMUX_GPIO(GPIO_FN_D38_AD6_DG0, D38_AD6_DG0_MARK), + PINMUX_GPIO(GPIO_FN_D37_AD5_DR5, D37_AD5_DR5_MARK), + PINMUX_GPIO(GPIO_FN_D36_AD4_DR4, D36_AD4_DR4_MARK), + PINMUX_GPIO(GPIO_FN_D35_AD3_DR3, D35_AD3_DR3_MARK), + PINMUX_GPIO(GPIO_FN_D34_AD2_DR2, D34_AD2_DR2_MARK), + PINMUX_GPIO(GPIO_FN_D33_AD1_DR1, D33_AD1_DR1_MARK), + PINMUX_GPIO(GPIO_FN_D32_AD0_DR0, D32_AD0_DR0_MARK), + PINMUX_GPIO(GPIO_FN_REQ1, REQ1_MARK), + PINMUX_GPIO(GPIO_FN_REQ2, REQ2_MARK), + PINMUX_GPIO(GPIO_FN_REQ3, REQ3_MARK), + PINMUX_GPIO(GPIO_FN_GNT1, GNT1_MARK), + PINMUX_GPIO(GPIO_FN_GNT2, GNT2_MARK), + PINMUX_GPIO(GPIO_FN_GNT3, GNT3_MARK), + PINMUX_GPIO(GPIO_FN_MMCCLK, MMCCLK_MARK), + PINMUX_GPIO(GPIO_FN_D31, D31_MARK), + PINMUX_GPIO(GPIO_FN_D30, D30_MARK), + PINMUX_GPIO(GPIO_FN_D29, D29_MARK), + PINMUX_GPIO(GPIO_FN_D28, D28_MARK), + PINMUX_GPIO(GPIO_FN_D27, D27_MARK), + PINMUX_GPIO(GPIO_FN_D26, D26_MARK), + PINMUX_GPIO(GPIO_FN_D25, D25_MARK), + PINMUX_GPIO(GPIO_FN_D24, D24_MARK), + PINMUX_GPIO(GPIO_FN_D23, D23_MARK), + PINMUX_GPIO(GPIO_FN_D22, D22_MARK), + PINMUX_GPIO(GPIO_FN_D21, D21_MARK), + PINMUX_GPIO(GPIO_FN_D20, D20_MARK), + PINMUX_GPIO(GPIO_FN_D19, D19_MARK), + PINMUX_GPIO(GPIO_FN_D18, D18_MARK), + PINMUX_GPIO(GPIO_FN_D17, D17_MARK), + PINMUX_GPIO(GPIO_FN_D16, D16_MARK), + PINMUX_GPIO(GPIO_FN_SCIF1_SCK, SCIF1_SCK_MARK), + PINMUX_GPIO(GPIO_FN_SCIF1_RXD, SCIF1_RXD_MARK), + PINMUX_GPIO(GPIO_FN_SCIF1_TXD, SCIF1_TXD_MARK), + PINMUX_GPIO(GPIO_FN_SCIF0_CTS, SCIF0_CTS_MARK), + PINMUX_GPIO(GPIO_FN_INTD, INTD_MARK), + PINMUX_GPIO(GPIO_FN_FCE, FCE_MARK), + PINMUX_GPIO(GPIO_FN_SCIF0_RTS, SCIF0_RTS_MARK), + PINMUX_GPIO(GPIO_FN_HSPI_CS, HSPI_CS_MARK), + PINMUX_GPIO(GPIO_FN_FSE, FSE_MARK), + PINMUX_GPIO(GPIO_FN_SCIF0_SCK, SCIF0_SCK_MARK), + PINMUX_GPIO(GPIO_FN_HSPI_CLK, HSPI_CLK_MARK), + PINMUX_GPIO(GPIO_FN_FRE, FRE_MARK), + PINMUX_GPIO(GPIO_FN_SCIF0_RXD, SCIF0_RXD_MARK), + PINMUX_GPIO(GPIO_FN_HSPI_RX, HSPI_RX_MARK), + PINMUX_GPIO(GPIO_FN_FRB, FRB_MARK), + PINMUX_GPIO(GPIO_FN_SCIF0_TXD, SCIF0_TXD_MARK), + PINMUX_GPIO(GPIO_FN_HSPI_TX, HSPI_TX_MARK), + PINMUX_GPIO(GPIO_FN_FWE, FWE_MARK), + PINMUX_GPIO(GPIO_FN_SCIF5_TXD, SCIF5_TXD_MARK), + PINMUX_GPIO(GPIO_FN_HAC1_SYNC, HAC1_SYNC_MARK), + PINMUX_GPIO(GPIO_FN_SSI1_WS, SSI1_WS_MARK), + PINMUX_GPIO(GPIO_FN_SIOF_TXD_PJ, SIOF_TXD_PJ_MARK), + PINMUX_GPIO(GPIO_FN_HAC0_SDOUT, HAC0_SDOUT_MARK), + PINMUX_GPIO(GPIO_FN_SSI0_SDATA, SSI0_SDATA_MARK), + PINMUX_GPIO(GPIO_FN_SIOF_RXD_PJ, SIOF_RXD_PJ_MARK), + PINMUX_GPIO(GPIO_FN_HAC0_SDIN, HAC0_SDIN_MARK), + PINMUX_GPIO(GPIO_FN_SSI0_SCK, SSI0_SCK_MARK), + PINMUX_GPIO(GPIO_FN_SIOF_SYNC_PJ, SIOF_SYNC_PJ_MARK), + PINMUX_GPIO(GPIO_FN_HAC0_SYNC, HAC0_SYNC_MARK), + PINMUX_GPIO(GPIO_FN_SSI0_WS, SSI0_WS_MARK), + PINMUX_GPIO(GPIO_FN_SIOF_MCLK_PJ, SIOF_MCLK_PJ_MARK), + PINMUX_GPIO(GPIO_FN_HAC_RES, HAC_RES_MARK), + PINMUX_GPIO(GPIO_FN_SIOF_SCK_PJ, SIOF_SCK_PJ_MARK), + PINMUX_GPIO(GPIO_FN_HAC0_BITCLK, HAC0_BITCLK_MARK), + PINMUX_GPIO(GPIO_FN_SSI0_CLK, SSI0_CLK_MARK), + PINMUX_GPIO(GPIO_FN_HAC1_BITCLK, HAC1_BITCLK_MARK), + PINMUX_GPIO(GPIO_FN_SSI1_CLK, SSI1_CLK_MARK), + PINMUX_GPIO(GPIO_FN_TCLK, TCLK_MARK), + PINMUX_GPIO(GPIO_FN_IOIS16, IOIS16_MARK), + PINMUX_GPIO(GPIO_FN_STATUS0, STATUS0_MARK), + PINMUX_GPIO(GPIO_FN_DRAK0_PK3, DRAK0_PK3_MARK), + PINMUX_GPIO(GPIO_FN_STATUS1, STATUS1_MARK), + PINMUX_GPIO(GPIO_FN_DRAK1_PK2, DRAK1_PK2_MARK), + PINMUX_GPIO(GPIO_FN_DACK2, DACK2_MARK), + PINMUX_GPIO(GPIO_FN_SCIF2_TXD, SCIF2_TXD_MARK), + PINMUX_GPIO(GPIO_FN_MMCCMD, MMCCMD_MARK), + PINMUX_GPIO(GPIO_FN_SIOF_TXD_PK, SIOF_TXD_PK_MARK), + PINMUX_GPIO(GPIO_FN_DACK3, DACK3_MARK), + PINMUX_GPIO(GPIO_FN_SCIF2_SCK, SCIF2_SCK_MARK), + PINMUX_GPIO(GPIO_FN_MMCDAT, MMCDAT_MARK), + PINMUX_GPIO(GPIO_FN_SIOF_SCK_PK, SIOF_SCK_PK_MARK), + PINMUX_GPIO(GPIO_FN_DREQ0, DREQ0_MARK), + PINMUX_GPIO(GPIO_FN_DREQ1, DREQ1_MARK), + PINMUX_GPIO(GPIO_FN_DRAK0_PK1, DRAK0_PK1_MARK), + PINMUX_GPIO(GPIO_FN_DRAK1_PK0, DRAK1_PK0_MARK), + PINMUX_GPIO(GPIO_FN_DREQ2, DREQ2_MARK), + PINMUX_GPIO(GPIO_FN_INTB, INTB_MARK), + PINMUX_GPIO(GPIO_FN_DREQ3, DREQ3_MARK), + PINMUX_GPIO(GPIO_FN_INTC, INTC_MARK), + PINMUX_GPIO(GPIO_FN_DRAK2, DRAK2_MARK), + PINMUX_GPIO(GPIO_FN_CE2A, CE2A_MARK), + PINMUX_GPIO(GPIO_FN_IRL4, IRL4_MARK), + PINMUX_GPIO(GPIO_FN_FD4, FD4_MARK), + PINMUX_GPIO(GPIO_FN_IRL5, IRL5_MARK), + PINMUX_GPIO(GPIO_FN_FD5, FD5_MARK), + PINMUX_GPIO(GPIO_FN_IRL6, IRL6_MARK), + PINMUX_GPIO(GPIO_FN_FD6, FD6_MARK), + PINMUX_GPIO(GPIO_FN_IRL7, IRL7_MARK), + PINMUX_GPIO(GPIO_FN_FD7, FD7_MARK), + PINMUX_GPIO(GPIO_FN_DRAK3, DRAK3_MARK), + PINMUX_GPIO(GPIO_FN_CE2B, CE2B_MARK), + PINMUX_GPIO(GPIO_FN_BREQ_BSACK, BREQ_BSACK_MARK), + PINMUX_GPIO(GPIO_FN_BACK_BSREQ, BACK_BSREQ_MARK), + PINMUX_GPIO(GPIO_FN_SCIF5_RXD, SCIF5_RXD_MARK), + PINMUX_GPIO(GPIO_FN_HAC1_SDIN, HAC1_SDIN_MARK), + PINMUX_GPIO(GPIO_FN_SSI1_SCK, SSI1_SCK_MARK), + PINMUX_GPIO(GPIO_FN_SCIF5_SCK, SCIF5_SCK_MARK), + PINMUX_GPIO(GPIO_FN_HAC1_SDOUT, HAC1_SDOUT_MARK), + PINMUX_GPIO(GPIO_FN_SSI1_SDATA, SSI1_SDATA_MARK), + PINMUX_GPIO(GPIO_FN_SCIF3_TXD, SCIF3_TXD_MARK), + PINMUX_GPIO(GPIO_FN_FCLE, FCLE_MARK), + PINMUX_GPIO(GPIO_FN_SCIF3_RXD, SCIF3_RXD_MARK), + PINMUX_GPIO(GPIO_FN_FALE, FALE_MARK), + PINMUX_GPIO(GPIO_FN_SCIF3_SCK, SCIF3_SCK_MARK), + PINMUX_GPIO(GPIO_FN_FD0, FD0_MARK), + PINMUX_GPIO(GPIO_FN_SCIF4_TXD, SCIF4_TXD_MARK), + PINMUX_GPIO(GPIO_FN_FD1, FD1_MARK), + PINMUX_GPIO(GPIO_FN_SCIF4_RXD, SCIF4_RXD_MARK), + PINMUX_GPIO(GPIO_FN_FD2, FD2_MARK), + PINMUX_GPIO(GPIO_FN_SCIF4_SCK, SCIF4_SCK_MARK), + PINMUX_GPIO(GPIO_FN_FD3, FD3_MARK), + PINMUX_GPIO(GPIO_FN_DEVSEL_DCLKOUT, DEVSEL_DCLKOUT_MARK), + PINMUX_GPIO(GPIO_FN_STOP_CDE, STOP_CDE_MARK), + PINMUX_GPIO(GPIO_FN_LOCK_ODDF, LOCK_ODDF_MARK), + PINMUX_GPIO(GPIO_FN_TRDY_DISPL, TRDY_DISPL_MARK), + PINMUX_GPIO(GPIO_FN_IRDY_HSYNC, IRDY_HSYNC_MARK), + PINMUX_GPIO(GPIO_FN_PCIFRAME_VSYNC, PCIFRAME_VSYNC_MARK), + PINMUX_GPIO(GPIO_FN_INTA, INTA_MARK), + PINMUX_GPIO(GPIO_FN_GNT0_GNTIN, GNT0_GNTIN_MARK), + PINMUX_GPIO(GPIO_FN_REQ0_REQOUT, REQ0_REQOUT_MARK), + PINMUX_GPIO(GPIO_FN_PERR, PERR_MARK), + PINMUX_GPIO(GPIO_FN_SERR, SERR_MARK), + PINMUX_GPIO(GPIO_FN_WE7_CBE3, WE7_CBE3_MARK), + PINMUX_GPIO(GPIO_FN_WE6_CBE2, WE6_CBE2_MARK), + PINMUX_GPIO(GPIO_FN_WE5_CBE1, WE5_CBE1_MARK), + PINMUX_GPIO(GPIO_FN_WE4_CBE0, WE4_CBE0_MARK), + PINMUX_GPIO(GPIO_FN_SCIF2_RXD, SCIF2_RXD_MARK), + PINMUX_GPIO(GPIO_FN_SIOF_RXD, SIOF_RXD_MARK), + PINMUX_GPIO(GPIO_FN_MRESETOUT, MRESETOUT_MARK), + PINMUX_GPIO(GPIO_FN_IRQOUT, IRQOUT_MARK), +}; + +static struct pinmux_cfg_reg pinmux_config_regs[] = { + { PINMUX_CFG_REG("PACR", 0xffe70000, 16, 2) { + PA7_FN, PA7_OUT, PA7_IN, PA7_IN_PU, + PA6_FN, PA6_OUT, PA6_IN, PA6_IN_PU, + PA5_FN, PA5_OUT, PA5_IN, PA5_IN_PU, + PA4_FN, PA4_OUT, PA4_IN, PA4_IN_PU, + PA3_FN, PA3_OUT, PA3_IN, PA3_IN_PU, + PA2_FN, PA2_OUT, PA2_IN, PA2_IN_PU, + PA1_FN, PA1_OUT, PA1_IN, PA1_IN_PU, + PA0_FN, PA0_OUT, PA0_IN, PA0_IN_PU } + }, + { PINMUX_CFG_REG("PBCR", 0xffe70002, 16, 2) { + PB7_FN, PB7_OUT, PB7_IN, PB7_IN_PU, + PB6_FN, PB6_OUT, PB6_IN, PB6_IN_PU, + PB5_FN, PB5_OUT, PB5_IN, PB5_IN_PU, + PB4_FN, PB4_OUT, PB4_IN, PB4_IN_PU, + PB3_FN, PB3_OUT, PB3_IN, PB3_IN_PU, + PB2_FN, PB2_OUT, PB2_IN, PB2_IN_PU, + PB1_FN, PB1_OUT, PB1_IN, PB1_IN_PU, + PB0_FN, PB0_OUT, PB0_IN, PB0_IN_PU } + }, + { PINMUX_CFG_REG("PCCR", 0xffe70004, 16, 2) { + PC7_FN, PC7_OUT, PC7_IN, PC7_IN_PU, + PC6_FN, PC6_OUT, PC6_IN, PC6_IN_PU, + PC5_FN, PC5_OUT, PC5_IN, PC5_IN_PU, + PC4_FN, PC4_OUT, PC4_IN, PC4_IN_PU, + PC3_FN, PC3_OUT, PC3_IN, PC3_IN_PU, + PC2_FN, PC2_OUT, PC2_IN, PC2_IN_PU, + PC1_FN, PC1_OUT, PC1_IN, PC1_IN_PU, + PC0_FN, PC0_OUT, PC0_IN, PC0_IN_PU } + }, + { PINMUX_CFG_REG("PDCR", 0xffe70006, 16, 2) { + PD7_FN, PD7_OUT, PD7_IN, PD7_IN_PU, + PD6_FN, PD6_OUT, PD6_IN, PD6_IN_PU, + PD5_FN, PD5_OUT, PD5_IN, PD5_IN_PU, + PD4_FN, PD4_OUT, PD4_IN, PD4_IN_PU, + PD3_FN, PD3_OUT, PD3_IN, PD3_IN_PU, + PD2_FN, PD2_OUT, PD2_IN, PD2_IN_PU, + PD1_FN, PD1_OUT, PD1_IN, PD1_IN_PU, + PD0_FN, PD0_OUT, PD0_IN, PD0_IN_PU } + }, + { PINMUX_CFG_REG("PECR", 0xffe70008, 16, 2) { + 0, 0, 0, 0, + 0, 0, 0, 0, + PE5_FN, PE5_OUT, PE5_IN, PE5_IN_PU, + PE4_FN, PE4_OUT, PE4_IN, PE4_IN_PU, + PE3_FN, PE3_OUT, PE3_IN, PE3_IN_PU, + PE2_FN, PE2_OUT, PE2_IN, PE2_IN_PU, + PE1_FN, PE1_OUT, PE1_IN, PE1_IN_PU, + PE0_FN, PE0_OUT, PE0_IN, PE0_IN_PU } + }, + { PINMUX_CFG_REG("PFCR", 0xffe7000a, 16, 2) { + PF7_FN, PF7_OUT, PF7_IN, PF7_IN_PU, + PF6_FN, PF6_OUT, PF6_IN, PF6_IN_PU, + PF5_FN, PF5_OUT, PF5_IN, PF5_IN_PU, + PF4_FN, PF4_OUT, PF4_IN, PF4_IN_PU, + PF3_FN, PF3_OUT, PF3_IN, PF3_IN_PU, + PF2_FN, PF2_OUT, PF2_IN, PF2_IN_PU, + PF1_FN, PF1_OUT, PF1_IN, PF1_IN_PU, + PF0_FN, PF0_OUT, PF0_IN, PF0_IN_PU } + }, + { PINMUX_CFG_REG("PGCR", 0xffe7000c, 16, 2) { + PG7_FN, PG7_OUT, PG7_IN, PG7_IN_PU, + PG6_FN, PG6_OUT, PG6_IN, PG6_IN_PU, + PG5_FN, PG5_OUT, PG5_IN, PG5_IN_PU, + PG4_FN, PG4_OUT, PG4_IN, PG4_IN_PU, + PG3_FN, PG3_OUT, PG3_IN, PG3_IN_PU, + PG2_FN, PG2_OUT, PG2_IN, PG2_IN_PU, + PG1_FN, PG1_OUT, PG1_IN, PG1_IN_PU, + PG0_FN, PG0_OUT, PG0_IN, PG0_IN_PU } + }, + { PINMUX_CFG_REG("PHCR", 0xffe7000e, 16, 2) { + PH7_FN, PH7_OUT, PH7_IN, PH7_IN_PU, + PH6_FN, PH6_OUT, PH6_IN, PH6_IN_PU, + PH5_FN, PH5_OUT, PH5_IN, PH5_IN_PU, + PH4_FN, PH4_OUT, PH4_IN, PH4_IN_PU, + PH3_FN, PH3_OUT, PH3_IN, PH3_IN_PU, + PH2_FN, PH2_OUT, PH2_IN, PH2_IN_PU, + PH1_FN, PH1_OUT, PH1_IN, PH1_IN_PU, + PH0_FN, PH0_OUT, PH0_IN, PH0_IN_PU } + }, + { PINMUX_CFG_REG("PJCR", 0xffe70010, 16, 2) { + PJ7_FN, PJ7_OUT, PJ7_IN, PJ7_IN_PU, + PJ6_FN, PJ6_OUT, PJ6_IN, PJ6_IN_PU, + PJ5_FN, PJ5_OUT, PJ5_IN, PJ5_IN_PU, + PJ4_FN, PJ4_OUT, PJ4_IN, PJ4_IN_PU, + PJ3_FN, PJ3_OUT, PJ3_IN, PJ3_IN_PU, + PJ2_FN, PJ2_OUT, PJ2_IN, PJ2_IN_PU, + PJ1_FN, PJ1_OUT, PJ1_IN, PJ1_IN_PU, + PJ0_FN, PJ0_OUT, PJ0_IN, PJ0_IN_PU } + }, + { PINMUX_CFG_REG("PKCR", 0xffe70012, 16, 2) { + PK7_FN, PK7_OUT, PK7_IN, PK7_IN_PU, + PK6_FN, PK6_OUT, PK6_IN, PK6_IN_PU, + PK5_FN, PK5_OUT, PK5_IN, PK5_IN_PU, + PK4_FN, PK4_OUT, PK4_IN, PK4_IN_PU, + PK3_FN, PK3_OUT, PK3_IN, PK3_IN_PU, + PK2_FN, PK2_OUT, PK2_IN, PK2_IN_PU, + PK1_FN, PK1_OUT, PK1_IN, PK1_IN_PU, + PK0_FN, PK0_OUT, PK0_IN, PK0_IN_PU } + }, + { PINMUX_CFG_REG("PLCR", 0xffe70014, 16, 2) { + PL7_FN, PL7_OUT, PL7_IN, PL7_IN_PU, + PL6_FN, PL6_OUT, PL6_IN, PL6_IN_PU, + PL5_FN, PL5_OUT, PL5_IN, PL5_IN_PU, + PL4_FN, PL4_OUT, PL4_IN, PL4_IN_PU, + PL3_FN, PL3_OUT, PL3_IN, PL3_IN_PU, + PL2_FN, PL2_OUT, PL2_IN, PL2_IN_PU, + PL1_FN, PL1_OUT, PL1_IN, PL1_IN_PU, + PL0_FN, PL0_OUT, PL0_IN, PL0_IN_PU } + }, + { PINMUX_CFG_REG("PMCR", 0xffe70016, 16, 2) { + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + PM1_FN, PM1_OUT, PM1_IN, PM1_IN_PU, + PM0_FN, PM0_OUT, PM0_IN, PM0_IN_PU } + }, + { PINMUX_CFG_REG("PNCR", 0xffe70018, 16, 2) { + PN7_FN, PN7_OUT, PN7_IN, PN7_IN_PU, + PN6_FN, PN6_OUT, PN6_IN, PN6_IN_PU, + PN5_FN, PN5_OUT, PN5_IN, PN5_IN_PU, + PN4_FN, PN4_OUT, PN4_IN, PN4_IN_PU, + PN3_FN, PN3_OUT, PN3_IN, PN3_IN_PU, + PN2_FN, PN2_OUT, PN2_IN, PN2_IN_PU, + PN1_FN, PN1_OUT, PN1_IN, PN1_IN_PU, + PN0_FN, PN0_OUT, PN0_IN, PN0_IN_PU } + }, + { PINMUX_CFG_REG("PPCR", 0xffe7001a, 16, 2) { + 0, 0, 0, 0, + 0, 0, 0, 0, + PP5_FN, PP5_OUT, PP5_IN, PP5_IN_PU, + PP4_FN, PP4_OUT, PP4_IN, PP4_IN_PU, + PP3_FN, PP3_OUT, PP3_IN, PP3_IN_PU, + PP2_FN, PP2_OUT, PP2_IN, PP2_IN_PU, + PP1_FN, PP1_OUT, PP1_IN, PP1_IN_PU, + PP0_FN, PP0_OUT, PP0_IN, PP0_IN_PU } + }, + { PINMUX_CFG_REG("PQCR", 0xffe7001c, 16, 2) { + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + PQ4_FN, PQ4_OUT, PQ4_IN, PQ4_IN_PU, + PQ3_FN, PQ3_OUT, PQ3_IN, PQ3_IN_PU, + PQ2_FN, PQ2_OUT, PQ2_IN, PQ2_IN_PU, + PQ1_FN, PQ1_OUT, PQ1_IN, PQ1_IN_PU, + PQ0_FN, PQ0_OUT, PQ0_IN, PQ0_IN_PU } + }, + { PINMUX_CFG_REG("PRCR", 0xffe7001e, 16, 2) { + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + 0, 0, 0, 0, + PR3_FN, PR3_OUT, PR3_IN, PR3_IN_PU, + PR2_FN, PR2_OUT, PR2_IN, PR2_IN_PU, + PR1_FN, PR1_OUT, PR1_IN, PR1_IN_PU, + PR0_FN, PR0_OUT, PR0_IN, PR0_IN_PU } + }, + { PINMUX_CFG_REG("P1MSELR", 0xffe70080, 16, 1) { + P1MSEL15_0, P1MSEL15_1, + P1MSEL14_0, P1MSEL14_1, + P1MSEL13_0, P1MSEL13_1, + P1MSEL12_0, P1MSEL12_1, + P1MSEL11_0, P1MSEL11_1, + P1MSEL10_0, P1MSEL10_1, + P1MSEL9_0, P1MSEL9_1, + P1MSEL8_0, P1MSEL8_1, + P1MSEL7_0, P1MSEL7_1, + P1MSEL6_0, P1MSEL6_1, + P1MSEL5_0, 0, + P1MSEL4_0, P1MSEL4_1, + P1MSEL3_0, P1MSEL3_1, + P1MSEL2_0, P1MSEL2_1, + P1MSEL1_0, P1MSEL1_1, + P1MSEL0_0, P1MSEL0_1 } + }, + { PINMUX_CFG_REG("P2MSELR", 0xffe70082, 16, 1) { + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + 0, 0, + P2MSEL2_0, P2MSEL2_1, + P2MSEL1_0, P2MSEL1_1, + P2MSEL0_0, P2MSEL0_1 } + }, + {} +}; + +static struct pinmux_data_reg pinmux_data_regs[] = { + { PINMUX_DATA_REG("PADR", 0xffe70020, 8) { + PA7_DATA, PA6_DATA, PA5_DATA, PA4_DATA, + PA3_DATA, PA2_DATA, PA1_DATA, PA0_DATA } + }, + { PINMUX_DATA_REG("PBDR", 0xffe70022, 8) { + PB7_DATA, PB6_DATA, PB5_DATA, PB4_DATA, + PB3_DATA, PB2_DATA, PB1_DATA, PB0_DATA } + }, + { PINMUX_DATA_REG("PCDR", 0xffe70024, 8) { + PC7_DATA, PC6_DATA, PC5_DATA, PC4_DATA, + PC3_DATA, PC2_DATA, PC1_DATA, PC0_DATA } + }, + { PINMUX_DATA_REG("PDDR", 0xffe70026, 8) { + PD7_DATA, PD6_DATA, PD5_DATA, PD4_DATA, + PD3_DATA, PD2_DATA, PD1_DATA, PD0_DATA } + }, + { PINMUX_DATA_REG("PEDR", 0xffe70028, 8) { + 0, 0, PE5_DATA, PE4_DATA, + PE3_DATA, PE2_DATA, PE1_DATA, PE0_DATA } + }, + { PINMUX_DATA_REG("PFDR", 0xffe7002a, 8) { + PF7_DATA, PF6_DATA, PF5_DATA, PF4_DATA, + PF3_DATA, PF2_DATA, PF1_DATA, PF0_DATA } + }, + { PINMUX_DATA_REG("PGDR", 0xffe7002c, 8) { + PG7_DATA, PG6_DATA, PG5_DATA, PG4_DATA, + PG3_DATA, PG2_DATA, PG1_DATA, PG0_DATA } + }, + { PINMUX_DATA_REG("PHDR", 0xffe7002e, 8) { + PH7_DATA, PH6_DATA, PH5_DATA, PH4_DATA, + PH3_DATA, PH2_DATA, PH1_DATA, PH0_DATA } + }, + { PINMUX_DATA_REG("PJDR", 0xffe70030, 8) { + PJ7_DATA, PJ6_DATA, PJ5_DATA, PJ4_DATA, + PJ3_DATA, PJ2_DATA, PJ1_DATA, PJ0_DATA } + }, + { PINMUX_DATA_REG("PKDR", 0xffe70032, 8) { + PK7_DATA, PK6_DATA, PK5_DATA, PK4_DATA, + PK3_DATA, PK2_DATA, PK1_DATA, PK0_DATA } + }, + { PINMUX_DATA_REG("PLDR", 0xffe70034, 8) { + PL7_DATA, PL6_DATA, PL5_DATA, PL4_DATA, + PL3_DATA, PL2_DATA, PL1_DATA, PL0_DATA } + }, + { PINMUX_DATA_REG("PMDR", 0xffe70036, 8) { + 0, 0, 0, 0, + 0, 0, PM1_DATA, PM0_DATA } + }, + { PINMUX_DATA_REG("PNDR", 0xffe70038, 8) { + PN7_DATA, PN6_DATA, PN5_DATA, PN4_DATA, + PN3_DATA, PN2_DATA, PN1_DATA, PN0_DATA } + }, + { PINMUX_DATA_REG("PPDR", 0xffe7003a, 8) { + 0, 0, PP5_DATA, PP4_DATA, + PP3_DATA, PP2_DATA, PP1_DATA, PP0_DATA } + }, + { PINMUX_DATA_REG("PQDR", 0xffe7003c, 8) { + 0, 0, 0, PQ4_DATA, + PQ3_DATA, PQ2_DATA, PQ1_DATA, PQ0_DATA } + }, + { PINMUX_DATA_REG("PRDR", 0xffe7003e, 8) { + 0, 0, 0, 0, + PR3_DATA, PR2_DATA, PR1_DATA, PR0_DATA } + }, + { }, +}; + +static struct pinmux_info sh7785_pinmux_info = { + .name = "sh7785_pfc", + .reserved_id = PINMUX_RESERVED, + .data = { PINMUX_DATA_BEGIN, PINMUX_DATA_END }, + .input = { PINMUX_INPUT_BEGIN, PINMUX_INPUT_END }, + .input_pu = { PINMUX_INPUT_PULLUP_BEGIN, PINMUX_INPUT_PULLUP_END }, + .output = { PINMUX_OUTPUT_BEGIN, PINMUX_OUTPUT_END }, + .mark = { PINMUX_MARK_BEGIN, PINMUX_MARK_END }, + .function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END }, + + .first_gpio = GPIO_PA7, + .last_gpio = GPIO_FN_IRQOUT, + + .gpios = pinmux_gpios, + .cfg_regs = pinmux_config_regs, + .data_regs = pinmux_data_regs, + + .gpio_data = pinmux_data, + .gpio_data_size = ARRAY_SIZE(pinmux_data), +}; + +static int __init plat_pinmux_setup(void) +{ + return register_pinmux(&sh7785_pinmux_info); +} + +arch_initcall(plat_pinmux_setup); diff --git a/arch/sh/kernel/gpio.c b/arch/sh/kernel/gpio.c index bb8b812c6895..d37165361034 100644 --- a/arch/sh/kernel/gpio.c +++ b/arch/sh/kernel/gpio.c @@ -267,9 +267,13 @@ int pinmux_config_gpio(struct pinmux_info *gpioc, unsigned gpio, break; in_range = enum_in_range(enum_id, &gpioc->function); - if (!in_range && range) + if (!in_range && range) { in_range = enum_in_range(enum_id, range); + if (in_range && enum_id == range->force) + continue; + } + if (!in_range) continue; @@ -432,7 +436,7 @@ static int __gpio_get_set_value(struct pinmux_info *gpioc, BUG(); else value = read_write_reg(dr->reg, dr->reg_width, - 1, bit, value, do_write); + 1, bit, !!value, do_write); return value; } diff --git a/arch/sh/kernel/sh_ksyms_32.c b/arch/sh/kernel/sh_ksyms_32.c index d917b7b4042b..d366a7443720 100644 --- a/arch/sh/kernel/sh_ksyms_32.c +++ b/arch/sh/kernel/sh_ksyms_32.c @@ -126,7 +126,6 @@ DECLARE_EXPORT(__movstrSI12_i4); EXPORT_SYMBOL(flush_cache_all); EXPORT_SYMBOL(flush_cache_range); EXPORT_SYMBOL(flush_dcache_page); -EXPORT_SYMBOL(__flush_purge_region); #endif #if !defined(CONFIG_CACHE_OFF) && defined(CONFIG_MMU) && \ @@ -147,3 +146,9 @@ EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(__clear_user); EXPORT_SYMBOL(_ebss); EXPORT_SYMBOL(empty_zero_page); + +#ifndef CONFIG_CACHE_OFF +EXPORT_SYMBOL(__flush_purge_region); +EXPORT_SYMBOL(__flush_wback_region); +EXPORT_SYMBOL(__flush_invalidate_region); +#endif diff --git a/arch/sh/kernel/smp.c b/arch/sh/kernel/smp.c index 508dfb023628..3c5ad1660bbc 100644 --- a/arch/sh/kernel/smp.c +++ b/arch/sh/kernel/smp.c @@ -18,6 +18,7 @@ #include <linux/spinlock.h> #include <linux/mm.h> #include <linux/module.h> +#include <linux/cpu.h> #include <linux/interrupt.h> #include <asm/atomic.h> #include <asm/processor.h> diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c index b359b08a8e33..1e5c74efbacc 100644 --- a/arch/sh/kernel/traps_32.c +++ b/arch/sh/kernel/traps_32.c @@ -105,6 +105,8 @@ void die(const char * str, struct pt_regs * regs, long err) dump_mem("Stack: ", regs->regs[15], THREAD_SIZE + (unsigned long)task_stack_page(current)); + notify_die(DIE_OOPS, str, regs, err, 255, SIGSEGV); + bust_spinlocks(0); add_taint(TAINT_DIE); spin_unlock_irq(&die_lock); diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c index 2a53943924b2..4abf00031dae 100644 --- a/arch/sh/mm/init.c +++ b/arch/sh/mm/init.c @@ -321,21 +321,4 @@ int memory_add_physaddr_to_nid(u64 addr) } EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid); #endif - -#ifdef CONFIG_MEMORY_HOTREMOVE -int remove_memory(u64 start, u64 size) -{ - unsigned long start_pfn = start >> PAGE_SHIFT; - unsigned long end_pfn = start_pfn + (size >> PAGE_SHIFT); - int ret; - - ret = offline_pages(start_pfn, end_pfn, 120 * HZ); - if (unlikely(ret)) - printk("%s: Failed, offline_pages() == %d\n", __func__, ret); - - return ret; -} -EXPORT_SYMBOL_GPL(remove_memory); -#endif - #endif /* CONFIG_MEMORY_HOTPLUG */ diff --git a/arch/sparc/oprofile/init.c b/arch/sparc/oprofile/init.c index 9ab815b95b5a..17bb6035069b 100644 --- a/arch/sparc/oprofile/init.c +++ b/arch/sparc/oprofile/init.c @@ -12,7 +12,7 @@ #include <linux/errno.h> #include <linux/init.h> -int __init oprofile_arch_init(struct oprofile_operations * ops) +int __init oprofile_arch_init(struct oprofile_operations *ops) { return -ENODEV; } diff --git a/arch/sparc64/oprofile/init.c b/arch/sparc64/oprofile/init.c index 9ab815b95b5a..17bb6035069b 100644 --- a/arch/sparc64/oprofile/init.c +++ b/arch/sparc64/oprofile/init.c @@ -12,7 +12,7 @@ #include <linux/errno.h> #include <linux/init.h> -int __init oprofile_arch_init(struct oprofile_operations * ops) +int __init oprofile_arch_init(struct oprofile_operations *ops) { return -ENODEV; } diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 4cd8083c58be..0cdcda35a05f 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -212,7 +212,7 @@ static void __init iommu_set_exclusion_range(struct amd_iommu *iommu) /* Programs the physical address of the device table into the IOMMU hardware */ static void __init iommu_set_device_table(struct amd_iommu *iommu) { - u32 entry; + u64 entry; BUG_ON(iommu->mmio_base == NULL); diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index ccf6c503fc3b..d1d4dc52f649 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -36,7 +36,7 @@ void ack_bad_irq(unsigned int irq) } #ifdef CONFIG_X86_32 -# define irq_stats(x) (&per_cpu(irq_stat,x)) +# define irq_stats(x) (&per_cpu(irq_stat, x)) #else # define irq_stats(x) cpu_pda(x) #endif @@ -113,7 +113,7 @@ int show_interrupts(struct seq_file *p, void *v) if (i == 0) { seq_printf(p, " "); for_each_online_cpu(j) - seq_printf(p, "CPU%-8d",j); + seq_printf(p, "CPU%-8d", j); seq_putc(p, '\n'); } diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 192624820217..1972266e8ba5 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -9,8 +9,6 @@ #include <asm/calgary.h> #include <asm/amd_iommu.h> -static int forbid_dac __read_mostly; - struct dma_mapping_ops *dma_ops; EXPORT_SYMBOL(dma_ops); @@ -293,17 +291,3 @@ void pci_iommu_shutdown(void) } /* Must execute after PCI subsystem */ fs_initcall(pci_iommu_init); - -#ifdef CONFIG_PCI -/* Many VIA bridges seem to corrupt data for DAC. Disable it here */ - -static __devinit void via_no_dac(struct pci_dev *dev) -{ - if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) { - printk(KERN_INFO "PCI: VIA PCI bridge detected." - "Disabling DAC.\n"); - forbid_dac = 1; - } -} -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac); -#endif diff --git a/arch/x86/oprofile/backtrace.c b/arch/x86/oprofile/backtrace.c index e2095cba409f..04df67f8a7ba 100644 --- a/arch/x86/oprofile/backtrace.c +++ b/arch/x86/oprofile/backtrace.c @@ -52,8 +52,7 @@ struct frame_head { unsigned long ret; } __attribute__((packed)); -static struct frame_head * -dump_user_backtrace(struct frame_head * head) +static struct frame_head *dump_user_backtrace(struct frame_head *head) { struct frame_head bufhead[2]; diff --git a/arch/x86/oprofile/nmi_int.c b/arch/x86/oprofile/nmi_int.c index 57f6c9088081..022cd41ea9b4 100644 --- a/arch/x86/oprofile/nmi_int.c +++ b/arch/x86/oprofile/nmi_int.c @@ -28,85 +28,9 @@ static struct op_x86_model_spec const *model; static DEFINE_PER_CPU(struct op_msrs, cpu_msrs); static DEFINE_PER_CPU(unsigned long, saved_lvtpc); -static int nmi_start(void); -static void nmi_stop(void); -static void nmi_cpu_start(void *dummy); -static void nmi_cpu_stop(void *dummy); - /* 0 == registered but off, 1 == registered and on */ static int nmi_enabled = 0; -#ifdef CONFIG_SMP -static int oprofile_cpu_notifier(struct notifier_block *b, unsigned long action, - void *data) -{ - int cpu = (unsigned long)data; - switch (action) { - case CPU_DOWN_FAILED: - case CPU_ONLINE: - smp_call_function_single(cpu, nmi_cpu_start, NULL, 0); - break; - case CPU_DOWN_PREPARE: - smp_call_function_single(cpu, nmi_cpu_stop, NULL, 1); - break; - } - return NOTIFY_DONE; -} - -static struct notifier_block oprofile_cpu_nb = { - .notifier_call = oprofile_cpu_notifier -}; -#endif - -#ifdef CONFIG_PM - -static int nmi_suspend(struct sys_device *dev, pm_message_t state) -{ - /* Only one CPU left, just stop that one */ - if (nmi_enabled == 1) - nmi_cpu_stop(NULL); - return 0; -} - -static int nmi_resume(struct sys_device *dev) -{ - if (nmi_enabled == 1) - nmi_cpu_start(NULL); - return 0; -} - -static struct sysdev_class oprofile_sysclass = { - .name = "oprofile", - .resume = nmi_resume, - .suspend = nmi_suspend, -}; - -static struct sys_device device_oprofile = { - .id = 0, - .cls = &oprofile_sysclass, -}; - -static int __init init_sysfs(void) -{ - int error; - - error = sysdev_class_register(&oprofile_sysclass); - if (!error) - error = sysdev_register(&device_oprofile); - return error; -} - -static void exit_sysfs(void) -{ - sysdev_unregister(&device_oprofile); - sysdev_class_unregister(&oprofile_sysclass); -} - -#else -#define init_sysfs() do { } while (0) -#define exit_sysfs() do { } while (0) -#endif /* CONFIG_PM */ - static int profile_exceptions_notify(struct notifier_block *self, unsigned long val, void *data) { @@ -361,6 +285,77 @@ static int nmi_create_files(struct super_block *sb, struct dentry *root) return 0; } +#ifdef CONFIG_SMP +static int oprofile_cpu_notifier(struct notifier_block *b, unsigned long action, + void *data) +{ + int cpu = (unsigned long)data; + switch (action) { + case CPU_DOWN_FAILED: + case CPU_ONLINE: + smp_call_function_single(cpu, nmi_cpu_start, NULL, 0); + break; + case CPU_DOWN_PREPARE: + smp_call_function_single(cpu, nmi_cpu_stop, NULL, 1); + break; + } + return NOTIFY_DONE; +} + +static struct notifier_block oprofile_cpu_nb = { + .notifier_call = oprofile_cpu_notifier +}; +#endif + +#ifdef CONFIG_PM + +static int nmi_suspend(struct sys_device *dev, pm_message_t state) +{ + /* Only one CPU left, just stop that one */ + if (nmi_enabled == 1) + nmi_cpu_stop(NULL); + return 0; +} + +static int nmi_resume(struct sys_device *dev) +{ + if (nmi_enabled == 1) + nmi_cpu_start(NULL); + return 0; +} + +static struct sysdev_class oprofile_sysclass = { + .name = "oprofile", + .resume = nmi_resume, + .suspend = nmi_suspend, +}; + +static struct sys_device device_oprofile = { + .id = 0, + .cls = &oprofile_sysclass, +}; + +static int __init init_sysfs(void) +{ + int error; + + error = sysdev_class_register(&oprofile_sysclass); + if (!error) + error = sysdev_register(&device_oprofile); + return error; +} + +static void exit_sysfs(void) +{ + sysdev_unregister(&device_oprofile); + sysdev_class_unregister(&oprofile_sysclass); +} + +#else +#define init_sysfs() do { } while (0) +#define exit_sysfs() do { } while (0) +#endif /* CONFIG_PM */ + static int p4force; module_param(p4force, int, 0); @@ -420,9 +415,6 @@ static int __init ppro_init(char **cpu_type) case 15: case 23: *cpu_type = "i386/core_2"; break; - case 26: - *cpu_type = "i386/core_2"; - break; default: /* Unknown */ return 0; @@ -432,6 +424,16 @@ static int __init ppro_init(char **cpu_type) return 1; } +static int __init arch_perfmon_init(char **cpu_type) +{ + if (!cpu_has_arch_perfmon) + return 0; + *cpu_type = "i386/arch_perfmon"; + model = &op_arch_perfmon_spec; + arch_perfmon_setup_counters(); + return 1; +} + /* in order to get sysfs right */ static int using_nmi; @@ -439,7 +441,7 @@ int __init op_nmi_init(struct oprofile_operations *ops) { __u8 vendor = boot_cpu_data.x86_vendor; __u8 family = boot_cpu_data.x86; - char *cpu_type; + char *cpu_type = NULL; int ret = 0; if (!cpu_has_apic) @@ -477,19 +479,20 @@ int __init op_nmi_init(struct oprofile_operations *ops) switch (family) { /* Pentium IV */ case 0xf: - if (!p4_init(&cpu_type)) - return -ENODEV; + p4_init(&cpu_type); break; /* A P6-class processor */ case 6: - if (!ppro_init(&cpu_type)) - return -ENODEV; + ppro_init(&cpu_type); break; default: - return -ENODEV; + break; } + + if (!cpu_type && !arch_perfmon_init(&cpu_type)) + return -ENODEV; break; default: diff --git a/arch/x86/oprofile/op_counter.h b/arch/x86/oprofile/op_counter.h index 2880b15c4675..91b6a116165e 100644 --- a/arch/x86/oprofile/op_counter.h +++ b/arch/x86/oprofile/op_counter.h @@ -6,22 +6,22 @@ * * @author John Levon */ - + #ifndef OP_COUNTER_H #define OP_COUNTER_H - + #define OP_MAX_COUNTER 8 - + /* Per-perfctr configuration as set via * oprofilefs. */ struct op_counter_config { - unsigned long count; - unsigned long enabled; - unsigned long event; - unsigned long kernel; - unsigned long user; - unsigned long unit_mask; + unsigned long count; + unsigned long enabled; + unsigned long event; + unsigned long kernel; + unsigned long user; + unsigned long unit_mask; }; extern struct op_counter_config counter_config[]; diff --git a/arch/x86/oprofile/op_model_amd.c b/arch/x86/oprofile/op_model_amd.c index d9faf607b3a6..509513760a6e 100644 --- a/arch/x86/oprofile/op_model_amd.c +++ b/arch/x86/oprofile/op_model_amd.c @@ -67,8 +67,9 @@ static unsigned long reset_value[NUM_COUNTERS]; /* The function interface needs to be fixed, something like add data. Should then be added to linux/oprofile.h. */ -extern void oprofile_add_ibs_sample(struct pt_regs *const regs, - unsigned int * const ibs_sample, u8 code); +extern void +oprofile_add_ibs_sample(struct pt_regs *const regs, + unsigned int *const ibs_sample, int ibs_code); struct ibs_fetch_sample { /* MSRC001_1031 IBS Fetch Linear Address Register */ @@ -309,12 +310,15 @@ static void op_amd_start(struct op_msrs const * const msrs) #ifdef CONFIG_OPROFILE_IBS if (ibs_allowed && ibs_config.fetch_enabled) { low = (ibs_config.max_cnt_fetch >> 4) & 0xFFFF; - high = IBS_FETCH_HIGH_ENABLE; + high = ((ibs_config.rand_en & 0x1) << 25) /* bit 57 */ + + IBS_FETCH_HIGH_ENABLE; wrmsr(MSR_AMD64_IBSFETCHCTL, low, high); } if (ibs_allowed && ibs_config.op_enabled) { - low = ((ibs_config.max_cnt_op >> 4) & 0xFFFF) + IBS_OP_LOW_ENABLE; + low = ((ibs_config.max_cnt_op >> 4) & 0xFFFF) + + ((ibs_config.dispatched_ops & 0x1) << 19) /* bit 19 */ + + IBS_OP_LOW_ENABLE; high = 0; wrmsr(MSR_AMD64_IBSOPCTL, low, high); } @@ -468,11 +472,10 @@ static void clear_ibs_nmi(void) on_each_cpu(apic_clear_ibs_nmi_per_cpu, NULL, 1); } -static int (*create_arch_files)(struct super_block * sb, struct dentry * root); +static int (*create_arch_files)(struct super_block *sb, struct dentry *root); -static int setup_ibs_files(struct super_block * sb, struct dentry * root) +static int setup_ibs_files(struct super_block *sb, struct dentry *root) { - char buf[12]; struct dentry *dir; int ret = 0; @@ -494,22 +497,22 @@ static int setup_ibs_files(struct super_block * sb, struct dentry * root) ibs_config.max_cnt_op = 250000; ibs_config.op_enabled = 0; ibs_config.dispatched_ops = 1; - snprintf(buf, sizeof(buf), "ibs_fetch"); - dir = oprofilefs_mkdir(sb, root, buf); - oprofilefs_create_ulong(sb, dir, "rand_enable", - &ibs_config.rand_en); + + dir = oprofilefs_mkdir(sb, root, "ibs_fetch"); oprofilefs_create_ulong(sb, dir, "enable", - &ibs_config.fetch_enabled); + &ibs_config.fetch_enabled); oprofilefs_create_ulong(sb, dir, "max_count", - &ibs_config.max_cnt_fetch); - snprintf(buf, sizeof(buf), "ibs_uops"); - dir = oprofilefs_mkdir(sb, root, buf); + &ibs_config.max_cnt_fetch); + oprofilefs_create_ulong(sb, dir, "rand_enable", + &ibs_config.rand_en); + + dir = oprofilefs_mkdir(sb, root, "ibs_op"); oprofilefs_create_ulong(sb, dir, "enable", - &ibs_config.op_enabled); + &ibs_config.op_enabled); oprofilefs_create_ulong(sb, dir, "max_count", - &ibs_config.max_cnt_op); + &ibs_config.max_cnt_op); oprofilefs_create_ulong(sb, dir, "dispatched_ops", - &ibs_config.dispatched_ops); + &ibs_config.dispatched_ops); return 0; } @@ -530,14 +533,14 @@ static void op_amd_exit(void) #endif struct op_x86_model_spec const op_amd_spec = { - .init = op_amd_init, - .exit = op_amd_exit, - .num_counters = NUM_COUNTERS, - .num_controls = NUM_CONTROLS, - .fill_in_addresses = &op_amd_fill_in_addresses, - .setup_ctrs = &op_amd_setup_ctrs, - .check_ctrs = &op_amd_check_ctrs, - .start = &op_amd_start, - .stop = &op_amd_stop, - .shutdown = &op_amd_shutdown + .init = op_amd_init, + .exit = op_amd_exit, + .num_counters = NUM_COUNTERS, + .num_controls = NUM_CONTROLS, + .fill_in_addresses = &op_amd_fill_in_addresses, + .setup_ctrs = &op_amd_setup_ctrs, + .check_ctrs = &op_amd_check_ctrs, + .start = &op_amd_start, + .stop = &op_amd_stop, + .shutdown = &op_amd_shutdown }; diff --git a/arch/x86/oprofile/op_model_p4.c b/arch/x86/oprofile/op_model_p4.c index 43ac5af338d8..4c4a51c90bc2 100644 --- a/arch/x86/oprofile/op_model_p4.c +++ b/arch/x86/oprofile/op_model_p4.c @@ -698,24 +698,24 @@ static void p4_shutdown(struct op_msrs const * const msrs) #ifdef CONFIG_SMP struct op_x86_model_spec const op_p4_ht2_spec = { - .num_counters = NUM_COUNTERS_HT2, - .num_controls = NUM_CONTROLS_HT2, - .fill_in_addresses = &p4_fill_in_addresses, - .setup_ctrs = &p4_setup_ctrs, - .check_ctrs = &p4_check_ctrs, - .start = &p4_start, - .stop = &p4_stop, - .shutdown = &p4_shutdown + .num_counters = NUM_COUNTERS_HT2, + .num_controls = NUM_CONTROLS_HT2, + .fill_in_addresses = &p4_fill_in_addresses, + .setup_ctrs = &p4_setup_ctrs, + .check_ctrs = &p4_check_ctrs, + .start = &p4_start, + .stop = &p4_stop, + .shutdown = &p4_shutdown }; #endif struct op_x86_model_spec const op_p4_spec = { - .num_counters = NUM_COUNTERS_NON_HT, - .num_controls = NUM_CONTROLS_NON_HT, - .fill_in_addresses = &p4_fill_in_addresses, - .setup_ctrs = &p4_setup_ctrs, - .check_ctrs = &p4_check_ctrs, - .start = &p4_start, - .stop = &p4_stop, - .shutdown = &p4_shutdown + .num_counters = NUM_COUNTERS_NON_HT, + .num_controls = NUM_CONTROLS_NON_HT, + .fill_in_addresses = &p4_fill_in_addresses, + .setup_ctrs = &p4_setup_ctrs, + .check_ctrs = &p4_check_ctrs, + .start = &p4_start, + .stop = &p4_stop, + .shutdown = &p4_shutdown }; diff --git a/arch/x86/oprofile/op_model_ppro.c b/arch/x86/oprofile/op_model_ppro.c index eff431f6c57b..0620d6d45f7d 100644 --- a/arch/x86/oprofile/op_model_ppro.c +++ b/arch/x86/oprofile/op_model_ppro.c @@ -1,32 +1,34 @@ /* * @file op_model_ppro.h - * pentium pro / P6 model-specific MSR operations + * Family 6 perfmon and architectural perfmon MSR operations * * @remark Copyright 2002 OProfile authors + * @remark Copyright 2008 Intel Corporation * @remark Read the file COPYING * * @author John Levon * @author Philippe Elie * @author Graydon Hoare + * @author Andi Kleen */ #include <linux/oprofile.h> +#include <linux/slab.h> #include <asm/ptrace.h> #include <asm/msr.h> #include <asm/apic.h> #include <asm/nmi.h> +#include <asm/intel_arch_perfmon.h> #include "op_x86_model.h" #include "op_counter.h" -#define NUM_COUNTERS 2 -#define NUM_CONTROLS 2 +static int num_counters = 2; +static int counter_width = 32; #define CTR_IS_RESERVED(msrs, c) (msrs->counters[(c)].addr ? 1 : 0) #define CTR_READ(l, h, msrs, c) do {rdmsr(msrs->counters[(c)].addr, (l), (h)); } while (0) -#define CTR_32BIT_WRITE(l, msrs, c) \ - do {wrmsr(msrs->counters[(c)].addr, -(u32)(l), 0); } while (0) -#define CTR_OVERFLOWED(n) (!((n) & (1U<<31))) +#define CTR_OVERFLOWED(n) (!((n) & (1U<<(counter_width-1)))) #define CTRL_IS_RESERVED(msrs, c) (msrs->controls[(c)].addr ? 1 : 0) #define CTRL_READ(l, h, msrs, c) do {rdmsr((msrs->controls[(c)].addr), (l), (h)); } while (0) @@ -40,20 +42,20 @@ #define CTRL_SET_UM(val, m) (val |= (m << 8)) #define CTRL_SET_EVENT(val, e) (val |= e) -static unsigned long reset_value[NUM_COUNTERS]; +static u64 *reset_value; static void ppro_fill_in_addresses(struct op_msrs * const msrs) { int i; - for (i = 0; i < NUM_COUNTERS; i++) { + for (i = 0; i < num_counters; i++) { if (reserve_perfctr_nmi(MSR_P6_PERFCTR0 + i)) msrs->counters[i].addr = MSR_P6_PERFCTR0 + i; else msrs->counters[i].addr = 0; } - for (i = 0; i < NUM_CONTROLS; i++) { + for (i = 0; i < num_counters; i++) { if (reserve_evntsel_nmi(MSR_P6_EVNTSEL0 + i)) msrs->controls[i].addr = MSR_P6_EVNTSEL0 + i; else @@ -67,8 +69,22 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs) unsigned int low, high; int i; + if (!reset_value) { + reset_value = kmalloc(sizeof(unsigned) * num_counters, + GFP_ATOMIC); + if (!reset_value) + return; + } + + if (cpu_has_arch_perfmon) { + union cpuid10_eax eax; + eax.full = cpuid_eax(0xa); + if (counter_width < eax.split.bit_width) + counter_width = eax.split.bit_width; + } + /* clear all counters */ - for (i = 0 ; i < NUM_CONTROLS; ++i) { + for (i = 0 ; i < num_counters; ++i) { if (unlikely(!CTRL_IS_RESERVED(msrs, i))) continue; CTRL_READ(low, high, msrs, i); @@ -77,18 +93,18 @@ static void ppro_setup_ctrs(struct op_msrs const * const msrs) } /* avoid a false detection of ctr overflows in NMI handler */ - for (i = 0; i < NUM_COUNTERS; ++i) { + for (i = 0; i < num_counters; ++i) { if (unlikely(!CTR_IS_RESERVED(msrs, i))) continue; - CTR_32BIT_WRITE(1, msrs, i); + wrmsrl(msrs->counters[i].addr, -1LL); } /* enable active counters */ - for (i = 0; i < NUM_COUNTERS; ++i) { + for (i = 0; i < num_counters; ++i) { if ((counter_config[i].enabled) && (CTR_IS_RESERVED(msrs, i))) { reset_value[i] = counter_config[i].count; - CTR_32BIT_WRITE(counter_config[i].count, msrs, i); + wrmsrl(msrs->counters[i].addr, -reset_value[i]); CTRL_READ(low, high, msrs, i); CTRL_CLEAR(low); @@ -111,13 +127,13 @@ static int ppro_check_ctrs(struct pt_regs * const regs, unsigned int low, high; int i; - for (i = 0 ; i < NUM_COUNTERS; ++i) { + for (i = 0 ; i < num_counters; ++i) { if (!reset_value[i]) continue; CTR_READ(low, high, msrs, i); if (CTR_OVERFLOWED(low)) { oprofile_add_sample(regs, i); - CTR_32BIT_WRITE(reset_value[i], msrs, i); + wrmsrl(msrs->counters[i].addr, -reset_value[i]); } } @@ -141,7 +157,7 @@ static void ppro_start(struct op_msrs const * const msrs) unsigned int low, high; int i; - for (i = 0; i < NUM_COUNTERS; ++i) { + for (i = 0; i < num_counters; ++i) { if (reset_value[i]) { CTRL_READ(low, high, msrs, i); CTRL_SET_ACTIVE(low); @@ -156,7 +172,7 @@ static void ppro_stop(struct op_msrs const * const msrs) unsigned int low, high; int i; - for (i = 0; i < NUM_COUNTERS; ++i) { + for (i = 0; i < num_counters; ++i) { if (!reset_value[i]) continue; CTRL_READ(low, high, msrs, i); @@ -169,24 +185,70 @@ static void ppro_shutdown(struct op_msrs const * const msrs) { int i; - for (i = 0 ; i < NUM_COUNTERS ; ++i) { + for (i = 0 ; i < num_counters ; ++i) { if (CTR_IS_RESERVED(msrs, i)) release_perfctr_nmi(MSR_P6_PERFCTR0 + i); } - for (i = 0 ; i < NUM_CONTROLS ; ++i) { + for (i = 0 ; i < num_counters ; ++i) { if (CTRL_IS_RESERVED(msrs, i)) release_evntsel_nmi(MSR_P6_EVNTSEL0 + i); } + if (reset_value) { + kfree(reset_value); + reset_value = NULL; + } } -struct op_x86_model_spec const op_ppro_spec = { - .num_counters = NUM_COUNTERS, - .num_controls = NUM_CONTROLS, - .fill_in_addresses = &ppro_fill_in_addresses, - .setup_ctrs = &ppro_setup_ctrs, - .check_ctrs = &ppro_check_ctrs, - .start = &ppro_start, - .stop = &ppro_stop, - .shutdown = &ppro_shutdown +struct op_x86_model_spec op_ppro_spec = { + .num_counters = 2, /* can be overriden */ + .num_controls = 2, /* dito */ + .fill_in_addresses = &ppro_fill_in_addresses, + .setup_ctrs = &ppro_setup_ctrs, + .check_ctrs = &ppro_check_ctrs, + .start = &ppro_start, + .stop = &ppro_stop, + .shutdown = &ppro_shutdown +}; + +/* + * Architectural performance monitoring. + * + * Newer Intel CPUs (Core1+) have support for architectural + * events described in CPUID 0xA. See the IA32 SDM Vol3b.18 for details. + * The advantage of this is that it can be done without knowing about + * the specific CPU. + */ + +void arch_perfmon_setup_counters(void) +{ + union cpuid10_eax eax; + + eax.full = cpuid_eax(0xa); + + /* Workaround for BIOS bugs in 6/15. Taken from perfmon2 */ + if (eax.split.version_id == 0 && current_cpu_data.x86 == 6 && + current_cpu_data.x86_model == 15) { + eax.split.version_id = 2; + eax.split.num_counters = 2; + eax.split.bit_width = 40; + } + + num_counters = eax.split.num_counters; + + op_arch_perfmon_spec.num_counters = num_counters; + op_arch_perfmon_spec.num_controls = num_counters; + op_ppro_spec.num_counters = num_counters; + op_ppro_spec.num_controls = num_counters; +} + +struct op_x86_model_spec op_arch_perfmon_spec = { + /* num_counters/num_controls filled in at runtime */ + .fill_in_addresses = &ppro_fill_in_addresses, + /* user space does the cpuid check for available events */ + .setup_ctrs = &ppro_setup_ctrs, + .check_ctrs = &ppro_check_ctrs, + .start = &ppro_start, + .stop = &ppro_stop, + .shutdown = &ppro_shutdown }; diff --git a/arch/x86/oprofile/op_x86_model.h b/arch/x86/oprofile/op_x86_model.h index 05a0261ba0c3..825e79064d64 100644 --- a/arch/x86/oprofile/op_x86_model.h +++ b/arch/x86/oprofile/op_x86_model.h @@ -22,8 +22,8 @@ struct op_msr { }; struct op_msrs { - struct op_msr * counters; - struct op_msr * controls; + struct op_msr *counters; + struct op_msr *controls; }; struct pt_regs; @@ -34,8 +34,8 @@ struct pt_regs; struct op_x86_model_spec { int (*init)(struct oprofile_operations *ops); void (*exit)(void); - unsigned int const num_counters; - unsigned int const num_controls; + unsigned int num_counters; + unsigned int num_controls; void (*fill_in_addresses)(struct op_msrs * const msrs); void (*setup_ctrs)(struct op_msrs const * const msrs); int (*check_ctrs)(struct pt_regs * const regs, @@ -45,9 +45,12 @@ struct op_x86_model_spec { void (*shutdown)(struct op_msrs const * const msrs); }; -extern struct op_x86_model_spec const op_ppro_spec; +extern struct op_x86_model_spec op_ppro_spec; extern struct op_x86_model_spec const op_p4_spec; extern struct op_x86_model_spec const op_p4_ht2_spec; extern struct op_x86_model_spec const op_amd_spec; +extern struct op_x86_model_spec op_arch_perfmon_spec; + +extern void arch_perfmon_setup_counters(void); #endif /* OP_X86_MODEL_H */ diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig index a213260b51e5..6c873dceb177 100644 --- a/arch/xtensa/Kconfig +++ b/arch/xtensa/Kconfig @@ -64,7 +64,12 @@ choice default XTENSA_VARIANT_FSF config XTENSA_VARIANT_FSF - bool "fsf" + bool "fsf - default (not generic) configuration" + +config XTENSA_VARIANT_DC232B + bool "dc232b - Diamond 232L Standard Core Rev.B (LE)" + help + This variant refers to Tensilica's Diamond 232L Standard core Rev.B (LE). endchoice config MMU diff --git a/arch/xtensa/Makefile b/arch/xtensa/Makefile index 4bd1e14c6b90..015b6b2a26b9 100644 --- a/arch/xtensa/Makefile +++ b/arch/xtensa/Makefile @@ -14,6 +14,7 @@ # (Use VAR=<xtensa_config> to use another default compiler.) variant-$(CONFIG_XTENSA_VARIANT_FSF) := fsf +variant-$(CONFIG_XTENSA_VARIANT_DC232B) := dc232b variant-$(CONFIG_XTENSA_VARIANT_LINUX_CUSTOM) := custom VARIANT = $(variant-y) diff --git a/arch/xtensa/kernel/irq.c b/arch/xtensa/kernel/irq.c index c9ea73b7031b..5fbcde59a92d 100644 --- a/arch/xtensa/kernel/irq.c +++ b/arch/xtensa/kernel/irq.c @@ -48,7 +48,7 @@ asmlinkage void do_IRQ(int irq, struct pt_regs *regs) if (irq >= NR_IRQS) { printk(KERN_EMERG "%s: cannot handle IRQ %d\n", - __FUNCTION__, irq); + __func__, irq); } irq_enter(); diff --git a/arch/xtensa/platforms/iss/network.c b/arch/xtensa/platforms/iss/network.c index a2e252217428..11a20adc1409 100644 --- a/arch/xtensa/platforms/iss/network.c +++ b/arch/xtensa/platforms/iss/network.c @@ -640,7 +640,7 @@ static int iss_net_configure(int index, char *init) *lp = ((struct iss_net_private) { .device_list = LIST_HEAD_INIT(lp->device_list), .opened_list = LIST_HEAD_INIT(lp->opened_list), - .lock = SPIN_LOCK_UNLOCKED, + .lock = __SPIN_LOCK_UNLOCKED(lp.lock), .dev = dev, .index = index, //.fd = -1, diff --git a/drivers/Kconfig b/drivers/Kconfig index d19b6f5a1106..d38f43f593d4 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -78,6 +78,8 @@ source "drivers/hid/Kconfig" source "drivers/usb/Kconfig" +source "drivers/uwb/Kconfig" + source "drivers/mmc/Kconfig" source "drivers/memstick/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index a0a2e3b675d6..2503f7b99b2f 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -101,3 +101,4 @@ obj-$(CONFIG_SSB) += ssb/ obj-$(CONFIG_VIRTIO) += virtio/ obj-$(CONFIG_REGULATOR) += regulator/ obj-$(CONFIG_STAGING) += staging/ +obj-$(CONFIG_UWB) += uwb/ diff --git a/drivers/acpi/pci_slot.c b/drivers/acpi/pci_slot.c index 9bb84d4596be..cd1f4467be7b 100644 --- a/drivers/acpi/pci_slot.c +++ b/drivers/acpi/pci_slot.c @@ -150,7 +150,7 @@ register_slot(acpi_handle handle, u32 lvl, void *context, void **rv) } snprintf(name, sizeof(name), "%u", (u32)sun); - pci_slot = pci_create_slot(pci_bus, device, name); + pci_slot = pci_create_slot(pci_bus, device, name, NULL); if (IS_ERR(pci_slot)) { err("pci_create_slot returned %ld\n", PTR_ERR(pci_slot)); kfree(slot); diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 1ee9499bd343..bbb3cae57492 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5373,6 +5373,8 @@ struct ata_port *ata_port_alloc(struct ata_host *host) #ifdef CONFIG_ATA_SFF INIT_DELAYED_WORK(&ap->port_task, ata_pio_task); +#else + INIT_DELAYED_WORK(&ap->port_task, NULL); #endif INIT_DELAYED_WORK(&ap->hotplug_task, ata_scsi_hotplug); INIT_WORK(&ap->scsi_rescan_task, ata_scsi_dev_rescan); diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c index a93247cc395a..5d687d7cffae 100644 --- a/drivers/ata/libata-eh.c +++ b/drivers/ata/libata-eh.c @@ -1206,7 +1206,10 @@ void ata_eh_about_to_do(struct ata_link *link, struct ata_device *dev, ata_eh_clear_action(link, dev, ehi, action); - if (!(ehc->i.flags & ATA_EHI_QUIET)) + /* About to take EH action, set RECOVERED. Ignore actions on + * slave links as master will do them again. + */ + if (!(ehc->i.flags & ATA_EHI_QUIET) && link != ap->slave_link) ap->pflags |= ATA_PFLAG_RECOVERED; spin_unlock_irqrestore(ap->lock, flags); @@ -2010,8 +2013,13 @@ void ata_eh_autopsy(struct ata_port *ap) struct ata_eh_context *mehc = &ap->link.eh_context; struct ata_eh_context *sehc = &ap->slave_link->eh_context; + /* transfer control flags from master to slave */ + sehc->i.flags |= mehc->i.flags & ATA_EHI_TO_SLAVE_MASK; + + /* perform autopsy on the slave link */ ata_eh_link_autopsy(ap->slave_link); + /* transfer actions from slave to master and clear slave */ ata_eh_about_to_do(ap->slave_link, NULL, ATA_EH_ALL_ACTIONS); mehc->i.action |= sehc->i.action; mehc->i.dev_action[1] |= sehc->i.dev_action[1]; @@ -2447,14 +2455,14 @@ int ata_eh_reset(struct ata_link *link, int classify, dev->pio_mode = XFER_PIO_0; dev->flags &= ~ATA_DFLAG_SLEEPING; - if (ata_phys_link_offline(ata_dev_phys_link(dev))) - continue; - - /* apply class override */ - if (lflags & ATA_LFLAG_ASSUME_ATA) - classes[dev->devno] = ATA_DEV_ATA; - else if (lflags & ATA_LFLAG_ASSUME_SEMB) - classes[dev->devno] = ATA_DEV_SEMB_UNSUP; /* not yet */ + if (!ata_phys_link_offline(ata_dev_phys_link(dev))) { + /* apply class override */ + if (lflags & ATA_LFLAG_ASSUME_ATA) + classes[dev->devno] = ATA_DEV_ATA; + else if (lflags & ATA_LFLAG_ASSUME_SEMB) + classes[dev->devno] = ATA_DEV_SEMB_UNSUP; + } else + classes[dev->devno] = ATA_DEV_NONE; } /* record current link speed */ diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 2a4c516894f0..4b4739486327 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -2153,8 +2153,17 @@ void ata_sff_error_handler(struct ata_port *ap) */ void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc) { - if (qc->ap->ioaddr.bmdma_addr) + struct ata_port *ap = qc->ap; + unsigned long flags; + + spin_lock_irqsave(ap->lock, flags); + + ap->hsm_task_state = HSM_ST_IDLE; + + if (ap->ioaddr.bmdma_addr) ata_bmdma_stop(qc); + + spin_unlock_irqrestore(ap->lock, flags); } /** diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 1cfa74535d91..5b72e734300a 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -70,6 +70,7 @@ enum { static int svia_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); static int svia_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); +static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf); static void svia_noop_freeze(struct ata_port *ap); static int vt6420_prereset(struct ata_link *link, unsigned long deadline); static int vt6421_pata_cable_detect(struct ata_port *ap); @@ -103,21 +104,26 @@ static struct scsi_host_template svia_sht = { ATA_BMDMA_SHT(DRV_NAME), }; -static struct ata_port_operations vt6420_sata_ops = { +static struct ata_port_operations svia_base_ops = { .inherits = &ata_bmdma_port_ops, + .sff_tf_load = svia_tf_load, +}; + +static struct ata_port_operations vt6420_sata_ops = { + .inherits = &svia_base_ops, .freeze = svia_noop_freeze, .prereset = vt6420_prereset, }; static struct ata_port_operations vt6421_pata_ops = { - .inherits = &ata_bmdma_port_ops, + .inherits = &svia_base_ops, .cable_detect = vt6421_pata_cable_detect, .set_piomode = vt6421_set_pio_mode, .set_dmamode = vt6421_set_dma_mode, }; static struct ata_port_operations vt6421_sata_ops = { - .inherits = &ata_bmdma_port_ops, + .inherits = &svia_base_ops, .scr_read = svia_scr_read, .scr_write = svia_scr_write, }; @@ -168,6 +174,29 @@ static int svia_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) return 0; } +/** + * svia_tf_load - send taskfile registers to host controller + * @ap: Port to which output is sent + * @tf: ATA taskfile register set + * + * Outputs ATA taskfile to standard ATA host controller. + * + * This is to fix the internal bug of via chipsets, which will + * reset the device register after changing the IEN bit on ctl + * register. + */ +static void svia_tf_load(struct ata_port *ap, const struct ata_taskfile *tf) +{ + struct ata_taskfile ttf; + + if (tf->ctl != ap->last_ctl) { + ttf = *tf; + ttf.flags |= ATA_TFLAG_DEVICE; + tf = &ttf; + } + ata_sff_tf_load(ap, tf); +} + static void svia_noop_freeze(struct ata_port *ap) { /* Some VIA controllers choke if ATA_NIEN is manipulated in diff --git a/drivers/char/hvc_console.c b/drivers/char/hvc_console.c index bf70450a49cc..5b819b12675a 100644 --- a/drivers/char/hvc_console.c +++ b/drivers/char/hvc_console.c @@ -161,7 +161,7 @@ static void hvc_console_print(struct console *co, const char *b, } } else { r = cons_ops[index]->put_chars(vtermnos[index], c, i); - if (r < 0) { + if (r <= 0) { /* throw away chars on error */ i = 0; } else if (r > 0) { @@ -374,6 +374,9 @@ static void hvc_close(struct tty_struct *tty, struct file * filp) if (hp->ops->notifier_del) hp->ops->notifier_del(hp, hp->data); + /* cancel pending tty resize work */ + cancel_work_sync(&hp->tty_resize); + /* * Chain calls chars_in_buffer() and returns immediately if * there is no buffered data otherwise sleeps on a wait queue @@ -399,6 +402,9 @@ static void hvc_hangup(struct tty_struct *tty) if (!hp) return; + /* cancel pending tty resize work */ + cancel_work_sync(&hp->tty_resize); + spin_lock_irqsave(&hp->lock, flags); /* @@ -418,8 +424,8 @@ static void hvc_hangup(struct tty_struct *tty) spin_unlock_irqrestore(&hp->lock, flags); - if (hp->ops->notifier_del) - hp->ops->notifier_del(hp, hp->data); + if (hp->ops->notifier_hangup) + hp->ops->notifier_hangup(hp, hp->data); while(temp_open_count) { --temp_open_count; @@ -431,7 +437,7 @@ static void hvc_hangup(struct tty_struct *tty) * Push buffered characters whether they were just recently buffered or waiting * on a blocked hypervisor. Call this function with hp->lock held. */ -static void hvc_push(struct hvc_struct *hp) +static int hvc_push(struct hvc_struct *hp) { int n; @@ -439,7 +445,7 @@ static void hvc_push(struct hvc_struct *hp) if (n <= 0) { if (n == 0) { hp->do_wakeup = 1; - return; + return 0; } /* throw away output on error; this happens when there is no session connected to the vterm. */ @@ -450,6 +456,8 @@ static void hvc_push(struct hvc_struct *hp) memmove(hp->outbuf, hp->outbuf + n, hp->n_outbuf); else hp->do_wakeup = 1; + + return n; } static int hvc_write(struct tty_struct *tty, const unsigned char *buf, int count) @@ -492,6 +500,39 @@ static int hvc_write(struct tty_struct *tty, const unsigned char *buf, int count return written; } +/** + * hvc_set_winsz() - Resize the hvc tty terminal window. + * @work: work structure. + * + * The routine shall not be called within an atomic context because it + * might sleep. + * + * Locking: hp->lock + */ +static void hvc_set_winsz(struct work_struct *work) +{ + struct hvc_struct *hp; + unsigned long hvc_flags; + struct tty_struct *tty; + struct winsize ws; + + hp = container_of(work, struct hvc_struct, tty_resize); + if (!hp) + return; + + spin_lock_irqsave(&hp->lock, hvc_flags); + if (!hp->tty) { + spin_unlock_irqrestore(&hp->lock, hvc_flags); + return; + } + ws = hp->ws; + tty = tty_kref_get(hp->tty); + spin_unlock_irqrestore(&hp->lock, hvc_flags); + + tty_do_resize(tty, tty, &ws); + tty_kref_put(tty); +} + /* * This is actually a contract between the driver and the tty layer outlining * how much write room the driver can guarantee will be sent OR BUFFERED. This @@ -538,16 +579,20 @@ int hvc_poll(struct hvc_struct *hp) char buf[N_INBUF] __ALIGNED__; unsigned long flags; int read_total = 0; + int written_total = 0; spin_lock_irqsave(&hp->lock, flags); /* Push pending writes */ if (hp->n_outbuf > 0) - hvc_push(hp); + written_total = hvc_push(hp); /* Reschedule us if still some write pending */ - if (hp->n_outbuf > 0) + if (hp->n_outbuf > 0) { poll_mask |= HVC_POLL_WRITE; + /* If hvc_push() was not able to write, sleep a few msecs */ + timeout = (written_total) ? 0 : MIN_TIMEOUT; + } /* No tty attached, just skip */ tty = hp->tty; @@ -632,6 +677,24 @@ int hvc_poll(struct hvc_struct *hp) } EXPORT_SYMBOL_GPL(hvc_poll); +/** + * hvc_resize() - Update terminal window size information. + * @hp: HVC console pointer + * @ws: Terminal window size structure + * + * Stores the specified window size information in the hvc structure of @hp. + * The function schedule the tty resize update. + * + * Locking: Locking free; the function MUST be called holding hp->lock + */ +void hvc_resize(struct hvc_struct *hp, struct winsize ws) +{ + if ((hp->ws.ws_row != ws.ws_row) || (hp->ws.ws_col != ws.ws_col)) { + hp->ws = ws; + schedule_work(&hp->tty_resize); + } +} + /* * This kthread is either polling or interrupt driven. This is determined by * calling hvc_poll() who determines whether a console adapter support @@ -659,10 +722,6 @@ static int khvcd(void *unused) poll_mask |= HVC_POLL_READ; if (hvc_kicked) continue; - if (poll_mask & HVC_POLL_WRITE) { - yield(); - continue; - } set_current_state(TASK_INTERRUPTIBLE); if (!hvc_kicked) { if (poll_mask == 0) @@ -718,6 +777,7 @@ struct hvc_struct __devinit *hvc_alloc(uint32_t vtermno, int data, kref_init(&hp->kref); + INIT_WORK(&hp->tty_resize, hvc_set_winsz); spin_lock_init(&hp->lock); spin_lock(&hvc_structs_lock); @@ -743,7 +803,7 @@ struct hvc_struct __devinit *hvc_alloc(uint32_t vtermno, int data, } EXPORT_SYMBOL_GPL(hvc_alloc); -int __devexit hvc_remove(struct hvc_struct *hp) +int hvc_remove(struct hvc_struct *hp) { unsigned long flags; struct tty_struct *tty; @@ -796,7 +856,7 @@ static int hvc_init(void) drv->minor_start = HVC_MINOR; drv->type = TTY_DRIVER_TYPE_SYSTEM; drv->init_termios = tty_std_termios; - drv->flags = TTY_DRIVER_REAL_RAW; + drv->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_RESET_TERMIOS; tty_set_operations(drv, &hvc_ops); /* Always start the kthread because there can be hotplug vty adapters diff --git a/drivers/char/hvc_console.h b/drivers/char/hvc_console.h index 9790201718ae..8297dbc2e6ec 100644 --- a/drivers/char/hvc_console.h +++ b/drivers/char/hvc_console.h @@ -27,6 +27,7 @@ #ifndef HVC_CONSOLE_H #define HVC_CONSOLE_H #include <linux/kref.h> +#include <linux/tty.h> /* * This is the max number of console adapters that can/will be found as @@ -56,6 +57,8 @@ struct hvc_struct { struct hv_ops *ops; int irq_requested; int data; + struct winsize ws; + struct work_struct tty_resize; struct list_head next; struct kref kref; /* ref count & hvc_struct lifetime */ }; @@ -65,9 +68,10 @@ struct hv_ops { int (*get_chars)(uint32_t vtermno, char *buf, int count); int (*put_chars)(uint32_t vtermno, const char *buf, int count); - /* Callbacks for notification. Called in open and close */ + /* Callbacks for notification. Called in open, close and hangup */ int (*notifier_add)(struct hvc_struct *hp, int irq); void (*notifier_del)(struct hvc_struct *hp, int irq); + void (*notifier_hangup)(struct hvc_struct *hp, int irq); }; /* Register a vterm and a slot index for use as a console (console_init) */ @@ -77,15 +81,19 @@ extern int hvc_instantiate(uint32_t vtermno, int index, struct hv_ops *ops); extern struct hvc_struct * __devinit hvc_alloc(uint32_t vtermno, int data, struct hv_ops *ops, int outbuf_size); /* remove a vterm from hvc tty operation (module_exit or hotplug remove) */ -extern int __devexit hvc_remove(struct hvc_struct *hp); +extern int hvc_remove(struct hvc_struct *hp); /* data available */ int hvc_poll(struct hvc_struct *hp); void hvc_kick(void); +/* Resize hvc tty terminal window */ +extern void hvc_resize(struct hvc_struct *hp, struct winsize ws); + /* default notifier for irq based notification */ extern int notifier_add_irq(struct hvc_struct *hp, int data); extern void notifier_del_irq(struct hvc_struct *hp, int data); +extern void notifier_hangup_irq(struct hvc_struct *hp, int data); #if defined(CONFIG_XMON) && defined(CONFIG_SMP) diff --git a/drivers/char/hvc_irq.c b/drivers/char/hvc_irq.c index 73a59cdb8947..d09e5688d449 100644 --- a/drivers/char/hvc_irq.c +++ b/drivers/char/hvc_irq.c @@ -42,3 +42,8 @@ void notifier_del_irq(struct hvc_struct *hp, int irq) free_irq(irq, hp); hp->irq_requested = 0; } + +void notifier_hangup_irq(struct hvc_struct *hp, int irq) +{ + notifier_del_irq(hp, irq); +} diff --git a/drivers/char/hvc_iseries.c b/drivers/char/hvc_iseries.c index b71c610fe5ae..b74a2f8ab908 100644 --- a/drivers/char/hvc_iseries.c +++ b/drivers/char/hvc_iseries.c @@ -202,6 +202,7 @@ static struct hv_ops hvc_get_put_ops = { .put_chars = put_chars, .notifier_add = notifier_add_irq, .notifier_del = notifier_del_irq, + .notifier_hangup = notifier_hangup_irq, }; static int __devinit hvc_vio_probe(struct vio_dev *vdev, diff --git a/drivers/char/hvc_vio.c b/drivers/char/hvc_vio.c index 93f3840c1682..019e0b58593d 100644 --- a/drivers/char/hvc_vio.c +++ b/drivers/char/hvc_vio.c @@ -82,6 +82,7 @@ static struct hv_ops hvc_get_put_ops = { .put_chars = hvc_put_chars, .notifier_add = notifier_add_irq, .notifier_del = notifier_del_irq, + .notifier_hangup = notifier_hangup_irq, }; static int __devinit hvc_vio_probe(struct vio_dev *vdev, diff --git a/drivers/char/hvc_xen.c b/drivers/char/hvc_xen.c index 538ceea5e7df..eba999f8598d 100644 --- a/drivers/char/hvc_xen.c +++ b/drivers/char/hvc_xen.c @@ -102,6 +102,7 @@ static struct hv_ops hvc_ops = { .put_chars = write_console, .notifier_add = notifier_add_irq, .notifier_del = notifier_del_irq, + .notifier_hangup = notifier_hangup_irq, }; static int __init xen_init(void) diff --git a/drivers/char/tty_port.c b/drivers/char/tty_port.c index 553b0e9d8d17..c8f8024cb40e 100644 --- a/drivers/char/tty_port.c +++ b/drivers/char/tty_port.c @@ -90,7 +90,7 @@ void tty_port_tty_set(struct tty_port *port, struct tty_struct *tty) spin_lock_irqsave(&port->lock, flags); if (port->tty) tty_kref_put(port->tty); - port->tty = tty; + port->tty = tty_kref_get(tty); spin_unlock_irqrestore(&port->lock, flags); } EXPORT_SYMBOL(tty_port_tty_set); diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index d0f4eb6fdb7f..3fb0d2c88ba5 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -198,6 +198,7 @@ static int __devinit virtcons_probe(struct virtio_device *dev) virtio_cons.put_chars = put_chars; virtio_cons.notifier_add = notifier_add_vio; virtio_cons.notifier_del = notifier_del_vio; + virtio_cons.notifier_hangup = notifier_del_vio; /* The first argument of hvc_alloc() is the virtual console number, so * we use zero. The second argument is the parameter for the diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index dbd42d6c93a7..7f2ee27fe76b 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -127,6 +127,13 @@ config GPIO_PCF857X This driver provides an in-kernel interface to those GPIOs using platform-neutral GPIO calls. +config GPIO_TWL4030 + tristate "TWL4030, TWL5030, and TPS659x0 GPIOs" + depends on TWL4030_CORE + help + Say yes here to access the GPIO signals of various multi-function + power management chips from Texas Instruments. + comment "PCI GPIO expanders:" config GPIO_BT8XX diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 01b4bbde1956..6aafdeb9ad03 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -9,4 +9,5 @@ obj-$(CONFIG_GPIO_MAX732X) += max732x.o obj-$(CONFIG_GPIO_MCP23S08) += mcp23s08.o obj-$(CONFIG_GPIO_PCA953X) += pca953x.o obj-$(CONFIG_GPIO_PCF857X) += pcf857x.o +obj-$(CONFIG_GPIO_TWL4030) += twl4030-gpio.o obj-$(CONFIG_GPIO_BT8XX) += bt8xxgpio.o diff --git a/drivers/gpio/twl4030-gpio.c b/drivers/gpio/twl4030-gpio.c new file mode 100644 index 000000000000..37d3eec8730a --- /dev/null +++ b/drivers/gpio/twl4030-gpio.c @@ -0,0 +1,521 @@ +/* + * twl4030_gpio.c -- access to GPIOs on TWL4030/TPS659x0 chips + * + * Copyright (C) 2006-2007 Texas Instruments, Inc. + * Copyright (C) 2006 MontaVista Software, Inc. + * + * Code re-arranged and cleaned up by: + * Syed Mohammed Khasim <x0khasim@ti.com> + * + * Initial Code: + * Andy Lowe / Nishanth Menon + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kthread.h> +#include <linux/irq.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <linux/i2c/twl4030.h> + + +/* + * The GPIO "subchip" supports 18 GPIOs which can be configured as + * inputs or outputs, with pullups or pulldowns on each pin. Each + * GPIO can trigger interrupts on either or both edges. + * + * GPIO interrupts can be fed to either of two IRQ lines; this is + * intended to support multiple hosts. + * + * There are also two LED pins used sometimes as output-only GPIOs. + */ + + +static struct gpio_chip twl_gpiochip; +static int twl4030_gpio_irq_base; + +/* genirq interfaces are not available to modules */ +#ifdef MODULE +#define is_module() true +#else +#define is_module() false +#endif + +/* GPIO_CTRL Fields */ +#define MASK_GPIO_CTRL_GPIO0CD1 BIT(0) +#define MASK_GPIO_CTRL_GPIO1CD2 BIT(1) +#define MASK_GPIO_CTRL_GPIO_ON BIT(2) + +/* Mask for GPIO registers when aggregated into a 32-bit integer */ +#define GPIO_32_MASK 0x0003ffff + +/* Data structures */ +static DEFINE_MUTEX(gpio_lock); + +/* store usage of each GPIO. - each bit represents one GPIO */ +static unsigned int gpio_usage_count; + +/*----------------------------------------------------------------------*/ + +/* + * To configure TWL4030 GPIO module registers + */ +static inline int gpio_twl4030_write(u8 address, u8 data) +{ + return twl4030_i2c_write_u8(TWL4030_MODULE_GPIO, data, address); +} + +/*----------------------------------------------------------------------*/ + +/* + * LED register offsets (use TWL4030_MODULE_{LED,PWMA,PWMB})) + * PWMs A and B are dedicated to LEDs A and B, respectively. + */ + +#define TWL4030_LED_LEDEN 0x0 + +/* LEDEN bits */ +#define LEDEN_LEDAON BIT(0) +#define LEDEN_LEDBON BIT(1) +#define LEDEN_LEDAEXT BIT(2) +#define LEDEN_LEDBEXT BIT(3) +#define LEDEN_LEDAPWM BIT(4) +#define LEDEN_LEDBPWM BIT(5) +#define LEDEN_PWM_LENGTHA BIT(6) +#define LEDEN_PWM_LENGTHB BIT(7) + +#define TWL4030_PWMx_PWMxON 0x0 +#define TWL4030_PWMx_PWMxOFF 0x1 + +#define PWMxON_LENGTH BIT(7) + +/*----------------------------------------------------------------------*/ + +/* + * To read a TWL4030 GPIO module register + */ +static inline int gpio_twl4030_read(u8 address) +{ + u8 data; + int ret = 0; + + ret = twl4030_i2c_read_u8(TWL4030_MODULE_GPIO, &data, address); + return (ret < 0) ? ret : data; +} + +/*----------------------------------------------------------------------*/ + +static u8 cached_leden; /* protected by gpio_lock */ + +/* The LED lines are open drain outputs ... a FET pulls to GND, so an + * external pullup is needed. We could also expose the integrated PWM + * as a LED brightness control; we initialize it as "always on". + */ +static void twl4030_led_set_value(int led, int value) +{ + u8 mask = LEDEN_LEDAON | LEDEN_LEDAPWM; + int status; + + if (led) + mask <<= 1; + + mutex_lock(&gpio_lock); + if (value) + cached_leden &= ~mask; + else + cached_leden |= mask; + status = twl4030_i2c_write_u8(TWL4030_MODULE_LED, cached_leden, + TWL4030_LED_LEDEN); + mutex_unlock(&gpio_lock); +} + +static int twl4030_set_gpio_direction(int gpio, int is_input) +{ + u8 d_bnk = gpio >> 3; + u8 d_msk = BIT(gpio & 0x7); + u8 reg = 0; + u8 base = REG_GPIODATADIR1 + d_bnk; + int ret = 0; + + mutex_lock(&gpio_lock); + ret = gpio_twl4030_read(base); + if (ret >= 0) { + if (is_input) + reg = ret & ~d_msk; + else + reg = ret | d_msk; + + ret = gpio_twl4030_write(base, reg); + } + mutex_unlock(&gpio_lock); + return ret; +} + +static int twl4030_set_gpio_dataout(int gpio, int enable) +{ + u8 d_bnk = gpio >> 3; + u8 d_msk = BIT(gpio & 0x7); + u8 base = 0; + + if (enable) + base = REG_SETGPIODATAOUT1 + d_bnk; + else + base = REG_CLEARGPIODATAOUT1 + d_bnk; + + return gpio_twl4030_write(base, d_msk); +} + +static int twl4030_get_gpio_datain(int gpio) +{ + u8 d_bnk = gpio >> 3; + u8 d_off = gpio & 0x7; + u8 base = 0; + int ret = 0; + + if (unlikely((gpio >= TWL4030_GPIO_MAX) + || !(gpio_usage_count & BIT(gpio)))) + return -EPERM; + + base = REG_GPIODATAIN1 + d_bnk; + ret = gpio_twl4030_read(base); + if (ret > 0) + ret = (ret >> d_off) & 0x1; + + return ret; +} + +/* + * Configure debounce timing value for a GPIO pin on TWL4030 + */ +int twl4030_set_gpio_debounce(int gpio, int enable) +{ + u8 d_bnk = gpio >> 3; + u8 d_msk = BIT(gpio & 0x7); + u8 reg = 0; + u8 base = 0; + int ret = 0; + + if (unlikely((gpio >= TWL4030_GPIO_MAX) + || !(gpio_usage_count & BIT(gpio)))) + return -EPERM; + + base = REG_GPIO_DEBEN1 + d_bnk; + mutex_lock(&gpio_lock); + ret = gpio_twl4030_read(base); + if (ret >= 0) { + if (enable) + reg = ret | d_msk; + else + reg = ret & ~d_msk; + + ret = gpio_twl4030_write(base, reg); + } + mutex_unlock(&gpio_lock); + return ret; +} +EXPORT_SYMBOL(twl4030_set_gpio_debounce); + +/*----------------------------------------------------------------------*/ + +static int twl_request(struct gpio_chip *chip, unsigned offset) +{ + int status = 0; + + mutex_lock(&gpio_lock); + + /* Support the two LED outputs as output-only GPIOs. */ + if (offset >= TWL4030_GPIO_MAX) { + u8 ledclr_mask = LEDEN_LEDAON | LEDEN_LEDAEXT + | LEDEN_LEDAPWM | LEDEN_PWM_LENGTHA; + u8 module = TWL4030_MODULE_PWMA; + + offset -= TWL4030_GPIO_MAX; + if (offset) { + ledclr_mask <<= 1; + module = TWL4030_MODULE_PWMB; + } + + /* initialize PWM to always-drive */ + status = twl4030_i2c_write_u8(module, 0x7f, + TWL4030_PWMx_PWMxOFF); + if (status < 0) + goto done; + status = twl4030_i2c_write_u8(module, 0x7f, + TWL4030_PWMx_PWMxON); + if (status < 0) + goto done; + + /* init LED to not-driven (high) */ + module = TWL4030_MODULE_LED; + status = twl4030_i2c_read_u8(module, &cached_leden, + TWL4030_LED_LEDEN); + if (status < 0) + goto done; + cached_leden &= ~ledclr_mask; + status = twl4030_i2c_write_u8(module, cached_leden, + TWL4030_LED_LEDEN); + if (status < 0) + goto done; + + status = 0; + goto done; + } + + /* on first use, turn GPIO module "on" */ + if (!gpio_usage_count) { + struct twl4030_gpio_platform_data *pdata; + u8 value = MASK_GPIO_CTRL_GPIO_ON; + + /* optionally have the first two GPIOs switch vMMC1 + * and vMMC2 power supplies based on card presence. + */ + pdata = chip->dev->platform_data; + value |= pdata->mmc_cd & 0x03; + + status = gpio_twl4030_write(REG_GPIO_CTRL, value); + } + + if (!status) + gpio_usage_count |= (0x1 << offset); + +done: + mutex_unlock(&gpio_lock); + return status; +} + +static void twl_free(struct gpio_chip *chip, unsigned offset) +{ + if (offset >= TWL4030_GPIO_MAX) { + twl4030_led_set_value(offset - TWL4030_GPIO_MAX, 1); + return; + } + + mutex_lock(&gpio_lock); + + gpio_usage_count &= ~BIT(offset); + + /* on last use, switch off GPIO module */ + if (!gpio_usage_count) + gpio_twl4030_write(REG_GPIO_CTRL, 0x0); + + mutex_unlock(&gpio_lock); +} + +static int twl_direction_in(struct gpio_chip *chip, unsigned offset) +{ + return (offset < TWL4030_GPIO_MAX) + ? twl4030_set_gpio_direction(offset, 1) + : -EINVAL; +} + +static int twl_get(struct gpio_chip *chip, unsigned offset) +{ + int status = 0; + + if (offset < TWL4030_GPIO_MAX) + status = twl4030_get_gpio_datain(offset); + else if (offset == TWL4030_GPIO_MAX) + status = cached_leden & LEDEN_LEDAON; + else + status = cached_leden & LEDEN_LEDBON; + return (status < 0) ? 0 : status; +} + +static int twl_direction_out(struct gpio_chip *chip, unsigned offset, int value) +{ + if (offset < TWL4030_GPIO_MAX) { + twl4030_set_gpio_dataout(offset, value); + return twl4030_set_gpio_direction(offset, 0); + } else { + twl4030_led_set_value(offset - TWL4030_GPIO_MAX, value); + return 0; + } +} + +static void twl_set(struct gpio_chip *chip, unsigned offset, int value) +{ + if (offset < TWL4030_GPIO_MAX) + twl4030_set_gpio_dataout(offset, value); + else + twl4030_led_set_value(offset - TWL4030_GPIO_MAX, value); +} + +static int twl_to_irq(struct gpio_chip *chip, unsigned offset) +{ + return (twl4030_gpio_irq_base && (offset < TWL4030_GPIO_MAX)) + ? (twl4030_gpio_irq_base + offset) + : -EINVAL; +} + +static struct gpio_chip twl_gpiochip = { + .label = "twl4030", + .owner = THIS_MODULE, + .request = twl_request, + .free = twl_free, + .direction_input = twl_direction_in, + .get = twl_get, + .direction_output = twl_direction_out, + .set = twl_set, + .to_irq = twl_to_irq, + .can_sleep = 1, +}; + +/*----------------------------------------------------------------------*/ + +static int __devinit gpio_twl4030_pulls(u32 ups, u32 downs) +{ + u8 message[6]; + unsigned i, gpio_bit; + + /* For most pins, a pulldown was enabled by default. + * We should have data that's specific to this board. + */ + for (gpio_bit = 1, i = 1; i < 6; i++) { + u8 bit_mask; + unsigned j; + + for (bit_mask = 0, j = 0; j < 8; j += 2, gpio_bit <<= 1) { + if (ups & gpio_bit) + bit_mask |= 1 << (j + 1); + else if (downs & gpio_bit) + bit_mask |= 1 << (j + 0); + } + message[i] = bit_mask; + } + + return twl4030_i2c_write(TWL4030_MODULE_GPIO, message, + REG_GPIOPUPDCTR1, 5); +} + +static int gpio_twl4030_remove(struct platform_device *pdev); + +static int __devinit gpio_twl4030_probe(struct platform_device *pdev) +{ + struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data; + int ret; + + /* maybe setup IRQs */ + if (pdata->irq_base) { + if (is_module()) { + dev_err(&pdev->dev, + "can't dispatch IRQs from modules\n"); + goto no_irqs; + } + ret = twl4030_sih_setup(TWL4030_MODULE_GPIO); + if (ret < 0) + return ret; + WARN_ON(ret != pdata->irq_base); + twl4030_gpio_irq_base = ret; + } + +no_irqs: + /* + * NOTE: boards may waste power if they don't set pullups + * and pulldowns correctly ... default for non-ULPI pins is + * pulldown, and some other pins may have external pullups + * or pulldowns. Careful! + */ + ret = gpio_twl4030_pulls(pdata->pullups, pdata->pulldowns); + if (ret) + dev_dbg(&pdev->dev, "pullups %.05x %.05x --> %d\n", + pdata->pullups, pdata->pulldowns, + ret); + + twl_gpiochip.base = pdata->gpio_base; + twl_gpiochip.ngpio = TWL4030_GPIO_MAX; + twl_gpiochip.dev = &pdev->dev; + + /* NOTE: we assume VIBRA_CTL.VIBRA_EN, in MODULE_AUDIO_VOICE, + * is (still) clear if use_leds is set. + */ + if (pdata->use_leds) + twl_gpiochip.ngpio += 2; + + ret = gpiochip_add(&twl_gpiochip); + if (ret < 0) { + dev_err(&pdev->dev, + "could not register gpiochip, %d\n", + ret); + twl_gpiochip.ngpio = 0; + gpio_twl4030_remove(pdev); + } else if (pdata->setup) { + int status; + + status = pdata->setup(&pdev->dev, + pdata->gpio_base, TWL4030_GPIO_MAX); + if (status) + dev_dbg(&pdev->dev, "setup --> %d\n", status); + } + + return ret; +} + +static int __devexit gpio_twl4030_remove(struct platform_device *pdev) +{ + struct twl4030_gpio_platform_data *pdata = pdev->dev.platform_data; + int status; + + if (pdata->teardown) { + status = pdata->teardown(&pdev->dev, + pdata->gpio_base, TWL4030_GPIO_MAX); + if (status) { + dev_dbg(&pdev->dev, "teardown --> %d\n", status); + return status; + } + } + + status = gpiochip_remove(&twl_gpiochip); + if (status < 0) + return status; + + if (is_module()) + return 0; + + /* REVISIT no support yet for deregistering all the IRQs */ + WARN_ON(1); + return -EIO; +} + +/* Note: this hardware lives inside an I2C-based multi-function device. */ +MODULE_ALIAS("platform:twl4030_gpio"); + +static struct platform_driver gpio_twl4030_driver = { + .driver.name = "twl4030_gpio", + .driver.owner = THIS_MODULE, + .probe = gpio_twl4030_probe, + .remove = __devexit_p(gpio_twl4030_remove), +}; + +static int __init gpio_twl4030_init(void) +{ + return platform_driver_register(&gpio_twl4030_driver); +} +subsys_initcall(gpio_twl4030_init); + +static void __exit gpio_twl4030_exit(void) +{ + platform_driver_unregister(&gpio_twl4030_driver); +} +module_exit(gpio_twl4030_exit); + +MODULE_AUTHOR("Texas Instruments, Inc."); +MODULE_DESCRIPTION("GPIO interface for TWL4030"); +MODULE_LICENSE("GPL"); diff --git a/drivers/gpu/drm/drm_drawable.c b/drivers/gpu/drm/drm_drawable.c index 1839c57663c5..80be1cab62af 100644 --- a/drivers/gpu/drm/drm_drawable.c +++ b/drivers/gpu/drm/drm_drawable.c @@ -76,11 +76,18 @@ int drm_rmdraw(struct drm_device *dev, void *data, struct drm_file *file_priv) { struct drm_draw *draw = data; unsigned long irqflags; + struct drm_drawable_info *info; spin_lock_irqsave(&dev->drw_lock, irqflags); - drm_free(drm_get_drawable_info(dev, draw->handle), - sizeof(struct drm_drawable_info), DRM_MEM_BUFS); + info = drm_get_drawable_info(dev, draw->handle); + if (info == NULL) { + spin_unlock_irqrestore(&dev->drw_lock, irqflags); + return -EINVAL; + } + drm_free(info->rects, info->num_rects * sizeof(struct drm_clip_rect), + DRM_MEM_BUFS); + drm_free(info, sizeof(struct drm_drawable_info), DRM_MEM_BUFS); idr_remove(&dev->drw_idr, draw->handle); @@ -111,7 +118,9 @@ int drm_update_drawable_info(struct drm_device *dev, void *data, struct drm_file switch (update->type) { case DRM_DRAWABLE_CLIPRECTS: - if (update->num != info->num_rects) { + if (update->num == 0) + rects = NULL; + else if (update->num != info->num_rects) { rects = drm_alloc(update->num * sizeof(struct drm_clip_rect), DRM_MEM_BUFS); } else diff --git a/drivers/gpu/drm/drm_ioc32.c b/drivers/gpu/drm/drm_ioc32.c index 90f5a8d9bdcb..920b72fbc958 100644 --- a/drivers/gpu/drm/drm_ioc32.c +++ b/drivers/gpu/drm/drm_ioc32.c @@ -64,6 +64,8 @@ #define DRM_IOCTL_SG_ALLOC32 DRM_IOW( 0x38, drm_scatter_gather32_t) #define DRM_IOCTL_SG_FREE32 DRM_IOW( 0x39, drm_scatter_gather32_t) +#define DRM_IOCTL_UPDATE_DRAW32 DRM_IOW( 0x3f, drm_update_draw32_t) + #define DRM_IOCTL_WAIT_VBLANK32 DRM_IOWR(0x3a, drm_wait_vblank32_t) typedef struct drm_version_32 { @@ -952,6 +954,37 @@ static int compat_drm_sg_free(struct file *file, unsigned int cmd, DRM_IOCTL_SG_FREE, (unsigned long)request); } +typedef struct drm_update_draw32 { + drm_drawable_t handle; + unsigned int type; + unsigned int num; + /* 64-bit version has a 32-bit pad here */ + u64 data; /**< Pointer */ +} __attribute__((packed)) drm_update_draw32_t; + +static int compat_drm_update_draw(struct file *file, unsigned int cmd, + unsigned long arg) +{ + drm_update_draw32_t update32; + struct drm_update_draw __user *request; + int err; + + if (copy_from_user(&update32, (void __user *)arg, sizeof(update32))) + return -EFAULT; + + request = compat_alloc_user_space(sizeof(*request)); + if (!access_ok(VERIFY_WRITE, request, sizeof(*request)) || + __put_user(update32.handle, &request->handle) || + __put_user(update32.type, &request->type) || + __put_user(update32.num, &request->num) || + __put_user(update32.data, &request->data)) + return -EFAULT; + + err = drm_ioctl(file->f_path.dentry->d_inode, file, + DRM_IOCTL_UPDATE_DRAW, (unsigned long)request); + return err; +} + struct drm_wait_vblank_request32 { enum drm_vblank_seq_type type; unsigned int sequence; @@ -1033,6 +1066,7 @@ drm_ioctl_compat_t *drm_compat_ioctls[] = { #endif [DRM_IOCTL_NR(DRM_IOCTL_SG_ALLOC32)] = compat_drm_sg_alloc, [DRM_IOCTL_NR(DRM_IOCTL_SG_FREE32)] = compat_drm_sg_free, + [DRM_IOCTL_NR(DRM_IOCTL_UPDATE_DRAW32)] = compat_drm_update_draw, [DRM_IOCTL_NR(DRM_IOCTL_WAIT_VBLANK32)] = compat_drm_wait_vblank, }; diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 4091b9e291f9..212a94f715b2 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -594,11 +594,14 @@ int drm_wait_vblank(struct drm_device *dev, void *data, goto done; } + /* Get a refcount on the vblank, which will be released by + * drm_vbl_send_signals(). + */ ret = drm_vblank_get(dev, crtc); if (ret) { drm_free(vbl_sig, sizeof(struct drm_vbl_sig), DRM_MEM_DRIVER); - return ret; + goto done; } atomic_inc(&dev->vbl_signal_pending); diff --git a/drivers/gpu/drm/drm_lock.c b/drivers/gpu/drm/drm_lock.c index a4caf95485d7..888159e03d26 100644 --- a/drivers/gpu/drm/drm_lock.c +++ b/drivers/gpu/drm/drm_lock.c @@ -232,6 +232,7 @@ int drm_lock_take(struct drm_lock_data *lock_data, } return 0; } +EXPORT_SYMBOL(drm_lock_take); /** * This takes a lock forcibly and hands it to context. Should ONLY be used @@ -299,6 +300,7 @@ int drm_lock_free(struct drm_lock_data *lock_data, unsigned int context) wake_up_interruptible(&lock_data->lock_queue); return 0; } +EXPORT_SYMBOL(drm_lock_free); /** * If we get here, it means that the process has called DRM_IOCTL_LOCK diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index db34780edbb2..01de536e0211 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -844,8 +844,11 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) * correctly in testing on 945G. * This may be a side effect of MSI having been made available for PEG * and the registers being closely associated. + * + * According to chipset errata, on the 965GM, MSI interrupts may + * be lost or delayed */ - if (!IS_I945G(dev) && !IS_I945GM(dev)) + if (!IS_I945G(dev) && !IS_I945GM(dev) && !IS_I965GM(dev)) if (pci_enable_msi(dev->pdev)) DRM_ERROR("failed to enable MSI\n"); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index eae4ed3956e0..f20ffe17df71 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -90,7 +90,7 @@ struct mem_block { typedef struct _drm_i915_vbl_swap { struct list_head head; drm_drawable_t drw_id; - unsigned int plane; + unsigned int pipe; unsigned int sequence; } drm_i915_vbl_swap_t; @@ -240,6 +240,9 @@ typedef struct drm_i915_private { u8 saveDACDATA[256*3]; /* 256 3-byte colors */ u8 saveCR[37]; + /** Work task for vblank-related ring access */ + struct work_struct vblank_work; + struct { struct drm_mm gtt_space; @@ -285,9 +288,6 @@ typedef struct drm_i915_private { */ struct delayed_work retire_work; - /** Work task for vblank-related ring access */ - struct work_struct vblank_work; - uint32_t next_gem_seqno; /** @@ -441,7 +441,7 @@ extern int i915_irq_wait(struct drm_device *dev, void *data, void i915_user_irq_get(struct drm_device *dev); void i915_user_irq_put(struct drm_device *dev); -extern void i915_gem_vblank_work_handler(struct work_struct *work); +extern void i915_vblank_work_handler(struct work_struct *work); extern irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS); extern void i915_driver_irq_preinstall(struct drm_device * dev); extern int i915_driver_irq_postinstall(struct drm_device *dev); diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index dc2e6fdb6ca3..17ae330ff269 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -2564,8 +2564,6 @@ i915_gem_load(struct drm_device *dev) INIT_LIST_HEAD(&dev_priv->mm.request_list); INIT_DELAYED_WORK(&dev_priv->mm.retire_work, i915_gem_retire_work_handler); - INIT_WORK(&dev_priv->mm.vblank_work, - i915_gem_vblank_work_handler); dev_priv->mm.next_gem_seqno = 1; i915_gem_detect_bit_6_swizzle(dev); diff --git a/drivers/gpu/drm/i915/i915_gem_proc.c b/drivers/gpu/drm/i915/i915_gem_proc.c index 15d4160415b0..93de15b4c9a7 100644 --- a/drivers/gpu/drm/i915/i915_gem_proc.c +++ b/drivers/gpu/drm/i915/i915_gem_proc.c @@ -192,7 +192,12 @@ static int i915_gem_seqno_info(char *buf, char **start, off_t offset, *start = &buf[offset]; *eof = 0; - DRM_PROC_PRINT("Current sequence: %d\n", i915_get_gem_seqno(dev)); + if (dev_priv->hw_status_page != NULL) { + DRM_PROC_PRINT("Current sequence: %d\n", + i915_get_gem_seqno(dev)); + } else { + DRM_PROC_PRINT("Current sequence: hws uninitialized\n"); + } DRM_PROC_PRINT("Waiter sequence: %d\n", dev_priv->mm.waiting_gem_seqno); DRM_PROC_PRINT("IRQ sequence: %d\n", dev_priv->mm.irq_gem_seqno); @@ -230,8 +235,12 @@ static int i915_interrupt_info(char *buf, char **start, off_t offset, I915_READ(PIPEBSTAT)); DRM_PROC_PRINT("Interrupts received: %d\n", atomic_read(&dev_priv->irq_received)); - DRM_PROC_PRINT("Current sequence: %d\n", - i915_get_gem_seqno(dev)); + if (dev_priv->hw_status_page != NULL) { + DRM_PROC_PRINT("Current sequence: %d\n", + i915_get_gem_seqno(dev)); + } else { + DRM_PROC_PRINT("Current sequence: hws uninitialized\n"); + } DRM_PROC_PRINT("Waiter sequence: %d\n", dev_priv->mm.waiting_gem_seqno); DRM_PROC_PRINT("IRQ sequence: %d\n", diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index baae511c785b..26f48932a51e 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -60,43 +60,6 @@ i915_disable_irq(drm_i915_private_t *dev_priv, u32 mask) } /** - * i915_get_pipe - return the the pipe associated with a given plane - * @dev: DRM device - * @plane: plane to look for - * - * The Intel Mesa & 2D drivers call the vblank routines with a plane number - * rather than a pipe number, since they may not always be equal. This routine - * maps the given @plane back to a pipe number. - */ -static int -i915_get_pipe(struct drm_device *dev, int plane) -{ - drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - u32 dspcntr; - - dspcntr = plane ? I915_READ(DSPBCNTR) : I915_READ(DSPACNTR); - - return dspcntr & DISPPLANE_SEL_PIPE_MASK ? 1 : 0; -} - -/** - * i915_get_plane - return the the plane associated with a given pipe - * @dev: DRM device - * @pipe: pipe to look for - * - * The Intel Mesa & 2D drivers call the vblank routines with a plane number - * rather than a plane number, since they may not always be equal. This routine - * maps the given @pipe back to a plane number. - */ -static int -i915_get_plane(struct drm_device *dev, int pipe) -{ - if (i915_get_pipe(dev, 0) == pipe) - return 0; - return 1; -} - -/** * i915_pipe_enabled - check if a pipe is enabled * @dev: DRM device * @pipe: pipe to check @@ -121,6 +84,9 @@ i915_pipe_enabled(struct drm_device *dev, int pipe) * Emit blits for scheduled buffer swaps. * * This function will be called with the HW lock held. + * Because this function must grab the ring mutex (dev->struct_mutex), + * it can no longer run at soft irq time. We'll fix this when we do + * the DRI2 swap buffer work. */ static void i915_vblank_tasklet(struct drm_device *dev) { @@ -141,6 +107,8 @@ static void i915_vblank_tasklet(struct drm_device *dev) u32 ropcpp = (0xcc << 16) | ((cpp - 1) << 24); RING_LOCALS; + mutex_lock(&dev->struct_mutex); + if (IS_I965G(dev) && sarea_priv->front_tiled) { cmd |= XY_SRC_COPY_BLT_DST_TILED; dst_pitch >>= 2; @@ -165,7 +133,7 @@ static void i915_vblank_tasklet(struct drm_device *dev) list_for_each_safe(list, tmp, &dev_priv->vbl_swaps.head) { drm_i915_vbl_swap_t *vbl_swap = list_entry(list, drm_i915_vbl_swap_t, head); - int pipe = i915_get_pipe(dev, vbl_swap->plane); + int pipe = vbl_swap->pipe; if ((counter[pipe] - vbl_swap->sequence) > (1<<23)) continue; @@ -179,20 +147,19 @@ static void i915_vblank_tasklet(struct drm_device *dev) drw = drm_get_drawable_info(dev, vbl_swap->drw_id); - if (!drw) { - spin_unlock(&dev->drw_lock); - drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER); - spin_lock(&dev_priv->swaps_lock); - continue; - } - list_for_each(hit, &hits) { drm_i915_vbl_swap_t *swap_cmp = list_entry(hit, drm_i915_vbl_swap_t, head); struct drm_drawable_info *drw_cmp = drm_get_drawable_info(dev, swap_cmp->drw_id); - if (drw_cmp && + /* Make sure both drawables are still + * around and have some rectangles before + * we look inside to order them for the + * blts below. + */ + if (drw_cmp && drw_cmp->num_rects > 0 && + drw && drw->num_rects > 0 && drw_cmp->rects[0].y1 > drw->rects[0].y1) { list_add_tail(list, hit); break; @@ -212,6 +179,7 @@ static void i915_vblank_tasklet(struct drm_device *dev) if (nhits == 0) { spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); + mutex_unlock(&dev->struct_mutex); return; } @@ -265,18 +233,21 @@ static void i915_vblank_tasklet(struct drm_device *dev) drm_i915_vbl_swap_t *swap_hit = list_entry(hit, drm_i915_vbl_swap_t, head); struct drm_clip_rect *rect; - int num_rects, plane; + int num_rects, pipe; unsigned short top, bottom; drw = drm_get_drawable_info(dev, swap_hit->drw_id); + /* The drawable may have been destroyed since + * the vblank swap was queued + */ if (!drw) continue; rect = drw->rects; - plane = swap_hit->plane; - top = upper[plane]; - bottom = lower[plane]; + pipe = swap_hit->pipe; + top = upper[pipe]; + bottom = lower[pipe]; for (num_rects = drw->num_rects; num_rects--; rect++) { int y1 = max(rect->y1, top); @@ -302,6 +273,7 @@ static void i915_vblank_tasklet(struct drm_device *dev) } spin_unlock_irqrestore(&dev->drw_lock, irqflags); + mutex_unlock(&dev->struct_mutex); list_for_each_safe(hit, tmp, &hits) { drm_i915_vbl_swap_t *swap_hit = @@ -313,15 +285,16 @@ static void i915_vblank_tasklet(struct drm_device *dev) } } -u32 i915_get_vblank_counter(struct drm_device *dev, int plane) +/* Called from drm generic code, passed a 'crtc', which + * we use as a pipe index + */ +u32 i915_get_vblank_counter(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; unsigned long high_frame; unsigned long low_frame; u32 high1, high2, low, count; - int pipe; - pipe = i915_get_pipe(dev, plane); high_frame = pipe ? PIPEBFRAMEHIGH : PIPEAFRAMEHIGH; low_frame = pipe ? PIPEBFRAMEPIXEL : PIPEAFRAMEPIXEL; @@ -350,18 +323,37 @@ u32 i915_get_vblank_counter(struct drm_device *dev, int plane) } void -i915_gem_vblank_work_handler(struct work_struct *work) +i915_vblank_work_handler(struct work_struct *work) { - drm_i915_private_t *dev_priv; - struct drm_device *dev; + drm_i915_private_t *dev_priv = container_of(work, drm_i915_private_t, + vblank_work); + struct drm_device *dev = dev_priv->dev; + unsigned long irqflags; - dev_priv = container_of(work, drm_i915_private_t, - mm.vblank_work); - dev = dev_priv->dev; + if (dev->lock.hw_lock == NULL) { + i915_vblank_tasklet(dev); + return; + } + + spin_lock_irqsave(&dev->tasklet_lock, irqflags); + dev->locked_tasklet_func = i915_vblank_tasklet; + spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); + + /* Try to get the lock now, if this fails, the lock + * holder will execute the tasklet during unlock + */ + if (!drm_lock_take(&dev->lock, DRM_KERNEL_CONTEXT)) + return; + + dev->lock.lock_time = jiffies; + atomic_inc(&dev->counts[_DRM_STAT_LOCKS]); + + spin_lock_irqsave(&dev->tasklet_lock, irqflags); + dev->locked_tasklet_func = NULL; + spin_unlock_irqrestore(&dev->tasklet_lock, irqflags); - mutex_lock(&dev->struct_mutex); i915_vblank_tasklet(dev); - mutex_unlock(&dev->struct_mutex); + drm_lock_free(&dev->lock, DRM_KERNEL_CONTEXT); } irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) @@ -398,7 +390,7 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) else if (pipea_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS| PIPE_VBLANK_INTERRUPT_STATUS)) { vblank++; - drm_handle_vblank(dev, i915_get_plane(dev, 0)); + drm_handle_vblank(dev, 0); } I915_WRITE(PIPEASTAT, pipea_stats); @@ -416,7 +408,7 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) else if (pipeb_stats & (PIPE_START_VBLANK_INTERRUPT_STATUS| PIPE_VBLANK_INTERRUPT_STATUS)) { vblank++; - drm_handle_vblank(dev, i915_get_plane(dev, 1)); + drm_handle_vblank(dev, 1); } if (pipeb_stats & I915_LEGACY_BLC_EVENT_STATUS) @@ -441,12 +433,8 @@ irqreturn_t i915_driver_irq_handler(DRM_IRQ_ARGS) if (iir & I915_ASLE_INTERRUPT) opregion_asle_intr(dev); - if (vblank && dev_priv->swaps_pending > 0) { - if (dev_priv->ring.ring_obj == NULL) - drm_locked_tasklet(dev, i915_vblank_tasklet); - else - schedule_work(&dev_priv->mm.vblank_work); - } + if (vblank && dev_priv->swaps_pending > 0) + schedule_work(&dev_priv->vblank_work); return IRQ_HANDLED; } @@ -481,22 +469,24 @@ static int i915_emit_irq(struct drm_device * dev) void i915_user_irq_get(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + unsigned long irqflags; - spin_lock(&dev_priv->user_irq_lock); + spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); if (dev->irq_enabled && (++dev_priv->user_irq_refcount == 1)) i915_enable_irq(dev_priv, I915_USER_INTERRUPT); - spin_unlock(&dev_priv->user_irq_lock); + spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); } void i915_user_irq_put(struct drm_device *dev) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; + unsigned long irqflags; - spin_lock(&dev_priv->user_irq_lock); + spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); BUG_ON(dev->irq_enabled && dev_priv->user_irq_refcount <= 0); if (dev->irq_enabled && (--dev_priv->user_irq_refcount == 0)) i915_disable_irq(dev_priv, I915_USER_INTERRUPT); - spin_unlock(&dev_priv->user_irq_lock); + spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); } static int i915_wait_irq(struct drm_device * dev, int irq_nr) @@ -578,74 +568,95 @@ int i915_irq_wait(struct drm_device *dev, void *data, return i915_wait_irq(dev, irqwait->irq_seq); } -int i915_enable_vblank(struct drm_device *dev, int plane) +/* Called from drm generic code, passed 'crtc' which + * we use as a pipe index + */ +int i915_enable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - int pipe = i915_get_pipe(dev, plane); u32 pipestat_reg = 0; u32 pipestat; + u32 interrupt = 0; + unsigned long irqflags; switch (pipe) { case 0: pipestat_reg = PIPEASTAT; - i915_enable_irq(dev_priv, I915_DISPLAY_PIPE_A_EVENT_INTERRUPT); + interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT; break; case 1: pipestat_reg = PIPEBSTAT; - i915_enable_irq(dev_priv, I915_DISPLAY_PIPE_B_EVENT_INTERRUPT); + interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT; break; default: DRM_ERROR("tried to enable vblank on non-existent pipe %d\n", pipe); - break; + return 0; } - if (pipestat_reg) { - pipestat = I915_READ(pipestat_reg); - if (IS_I965G(dev)) - pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE; - else - pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE; - /* Clear any stale interrupt status */ - pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS | - PIPE_VBLANK_INTERRUPT_STATUS); - I915_WRITE(pipestat_reg, pipestat); - } + spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); + /* Enabling vblank events in IMR comes before PIPESTAT write, or + * there's a race where the PIPESTAT vblank bit gets set to 1, so + * the OR of enabled PIPESTAT bits goes to 1, so the PIPExEVENT in + * ISR flashes to 1, but the IIR bit doesn't get set to 1 because + * IMR masks it. It doesn't ever get set after we clear the masking + * in IMR because the ISR bit is edge, not level-triggered, on the + * OR of PIPESTAT bits. + */ + i915_enable_irq(dev_priv, interrupt); + pipestat = I915_READ(pipestat_reg); + if (IS_I965G(dev)) + pipestat |= PIPE_START_VBLANK_INTERRUPT_ENABLE; + else + pipestat |= PIPE_VBLANK_INTERRUPT_ENABLE; + /* Clear any stale interrupt status */ + pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS | + PIPE_VBLANK_INTERRUPT_STATUS); + I915_WRITE(pipestat_reg, pipestat); + (void) I915_READ(pipestat_reg); /* Posting read */ + spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); return 0; } -void i915_disable_vblank(struct drm_device *dev, int plane) +/* Called from drm generic code, passed 'crtc' which + * we use as a pipe index + */ +void i915_disable_vblank(struct drm_device *dev, int pipe) { drm_i915_private_t *dev_priv = (drm_i915_private_t *) dev->dev_private; - int pipe = i915_get_pipe(dev, plane); u32 pipestat_reg = 0; u32 pipestat; + u32 interrupt = 0; + unsigned long irqflags; switch (pipe) { case 0: pipestat_reg = PIPEASTAT; - i915_disable_irq(dev_priv, I915_DISPLAY_PIPE_A_EVENT_INTERRUPT); + interrupt = I915_DISPLAY_PIPE_A_EVENT_INTERRUPT; break; case 1: pipestat_reg = PIPEBSTAT; - i915_disable_irq(dev_priv, I915_DISPLAY_PIPE_B_EVENT_INTERRUPT); + interrupt = I915_DISPLAY_PIPE_B_EVENT_INTERRUPT; break; default: DRM_ERROR("tried to disable vblank on non-existent pipe %d\n", pipe); + return; break; } - if (pipestat_reg) { - pipestat = I915_READ(pipestat_reg); - pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE | - PIPE_VBLANK_INTERRUPT_ENABLE); - /* Clear any stale interrupt status */ - pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS | - PIPE_VBLANK_INTERRUPT_STATUS); - I915_WRITE(pipestat_reg, pipestat); - } + spin_lock_irqsave(&dev_priv->user_irq_lock, irqflags); + i915_disable_irq(dev_priv, interrupt); + pipestat = I915_READ(pipestat_reg); + pipestat &= ~(PIPE_START_VBLANK_INTERRUPT_ENABLE | + PIPE_VBLANK_INTERRUPT_ENABLE); + /* Clear any stale interrupt status */ + pipestat |= (PIPE_START_VBLANK_INTERRUPT_STATUS | + PIPE_VBLANK_INTERRUPT_STATUS); + I915_WRITE(pipestat_reg, pipestat); + (void) I915_READ(pipestat_reg); /* Posting read */ + spin_unlock_irqrestore(&dev_priv->user_irq_lock, irqflags); } /* Set the vblank monitor pipe @@ -687,8 +698,8 @@ int i915_vblank_swap(struct drm_device *dev, void *data, { drm_i915_private_t *dev_priv = dev->dev_private; drm_i915_vblank_swap_t *swap = data; - drm_i915_vbl_swap_t *vbl_swap; - unsigned int pipe, seqtype, curseq, plane; + drm_i915_vbl_swap_t *vbl_swap, *vbl_old; + unsigned int pipe, seqtype, curseq; unsigned long irqflags; struct list_head *list; int ret; @@ -709,8 +720,7 @@ int i915_vblank_swap(struct drm_device *dev, void *data, return -EINVAL; } - plane = (swap->seqtype & _DRM_VBLANK_SECONDARY) ? 1 : 0; - pipe = i915_get_pipe(dev, plane); + pipe = (swap->seqtype & _DRM_VBLANK_SECONDARY) ? 1 : 0; seqtype = swap->seqtype & (_DRM_VBLANK_RELATIVE | _DRM_VBLANK_ABSOLUTE); @@ -751,44 +761,52 @@ int i915_vblank_swap(struct drm_device *dev, void *data, } } + vbl_swap = drm_calloc(1, sizeof(*vbl_swap), DRM_MEM_DRIVER); + + if (!vbl_swap) { + DRM_ERROR("Failed to allocate memory to queue swap\n"); + drm_vblank_put(dev, pipe); + return -ENOMEM; + } + + vbl_swap->drw_id = swap->drawable; + vbl_swap->pipe = pipe; + vbl_swap->sequence = swap->sequence; + spin_lock_irqsave(&dev_priv->swaps_lock, irqflags); list_for_each(list, &dev_priv->vbl_swaps.head) { - vbl_swap = list_entry(list, drm_i915_vbl_swap_t, head); + vbl_old = list_entry(list, drm_i915_vbl_swap_t, head); - if (vbl_swap->drw_id == swap->drawable && - vbl_swap->plane == plane && - vbl_swap->sequence == swap->sequence) { + if (vbl_old->drw_id == swap->drawable && + vbl_old->pipe == pipe && + vbl_old->sequence == swap->sequence) { spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); + drm_vblank_put(dev, pipe); + drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER); DRM_DEBUG("Already scheduled\n"); return 0; } } - spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); - - if (dev_priv->swaps_pending >= 100) { + if (dev_priv->swaps_pending >= 10) { DRM_DEBUG("Too many swaps queued\n"); + DRM_DEBUG(" pipe 0: %d pipe 1: %d\n", + drm_vblank_count(dev, 0), + drm_vblank_count(dev, 1)); + + list_for_each(list, &dev_priv->vbl_swaps.head) { + vbl_old = list_entry(list, drm_i915_vbl_swap_t, head); + DRM_DEBUG("\tdrw %x pipe %d seq %x\n", + vbl_old->drw_id, vbl_old->pipe, + vbl_old->sequence); + } + spin_unlock_irqrestore(&dev_priv->swaps_lock, irqflags); drm_vblank_put(dev, pipe); + drm_free(vbl_swap, sizeof(*vbl_swap), DRM_MEM_DRIVER); return -EBUSY; } - vbl_swap = drm_calloc(1, sizeof(*vbl_swap), DRM_MEM_DRIVER); - - if (!vbl_swap) { - DRM_ERROR("Failed to allocate memory to queue swap\n"); - drm_vblank_put(dev, pipe); - return -ENOMEM; - } - - DRM_DEBUG("\n"); - - vbl_swap->drw_id = swap->drawable; - vbl_swap->plane = plane; - vbl_swap->sequence = swap->sequence; - - spin_lock_irqsave(&dev_priv->swaps_lock, irqflags); - list_add_tail(&vbl_swap->head, &dev_priv->vbl_swaps.head); dev_priv->swaps_pending++; @@ -815,6 +833,7 @@ int i915_driver_irq_postinstall(struct drm_device *dev) spin_lock_init(&dev_priv->swaps_lock); INIT_LIST_HEAD(&dev_priv->vbl_swaps.head); + INIT_WORK(&dev_priv->vblank_work, i915_vblank_work_handler); dev_priv->swaps_pending = 0; /* Set initial unmasked IRQs to just the selected vblank pipes. */ diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c index 1e328d19cd6d..3e01992230b8 100644 --- a/drivers/i2c/algos/i2c-algo-pcf.c +++ b/drivers/i2c/algos/i2c-algo-pcf.c @@ -135,7 +135,7 @@ static int wait_for_pin(struct i2c_algo_pcf_data *adap, int *status) { *status = get_pcf(adap, 1); #ifndef STUB_I2C while (timeout-- && (*status & I2C_PCF_PIN)) { - adap->waitforpin(); + adap->waitforpin(adap->data); *status = get_pcf(adap, 1); } if (*status & I2C_PCF_LAB) { @@ -208,7 +208,7 @@ static int pcf_init_8584 (struct i2c_algo_pcf_data *adap) return -ENXIO; } - printk(KERN_DEBUG "i2c-algo-pcf.o: deteted and initialized PCF8584.\n"); + printk(KERN_DEBUG "i2c-algo-pcf.o: detected and initialized PCF8584.\n"); return 0; } @@ -331,13 +331,16 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap, int i; int ret=0, timeout, status; + if (adap->xfer_begin) + adap->xfer_begin(adap->data); /* Check for bus busy */ timeout = wait_for_bb(adap); if (timeout) { DEB2(printk(KERN_ERR "i2c-algo-pcf.o: " "Timeout waiting for BB in pcf_xfer\n");) - return -EIO; + i = -EIO; + goto out; } for (i = 0;ret >= 0 && i < num; i++) { @@ -359,12 +362,14 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap, if (timeout) { if (timeout == -EINTR) { /* arbitration lost */ - return (-EINTR); + i = -EINTR; + goto out; } i2c_stop(adap); DEB2(printk(KERN_ERR "i2c-algo-pcf.o: Timeout waiting " "for PIN(1) in pcf_xfer\n");) - return (-EREMOTEIO); + i = -EREMOTEIO; + goto out; } #ifndef STUB_I2C @@ -372,7 +377,8 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap, if (status & I2C_PCF_LRB) { i2c_stop(adap); DEB2(printk(KERN_ERR "i2c-algo-pcf.o: No LRB(1) in pcf_xfer\n");) - return (-EREMOTEIO); + i = -EREMOTEIO; + goto out; } #endif @@ -404,6 +410,9 @@ static int pcf_xfer(struct i2c_adapter *i2c_adap, } } +out: + if (adap->xfer_end) + adap->xfer_end(adap->data); return (i); } diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index acadbc51fc0f..7f95905bbb9d 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -97,6 +97,7 @@ config I2C_I801 ICH9 Tolapai ICH10 + PCH This driver can also be built as a module. If so, the module will be called i2c-i801. diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c index 8164de1f4d72..228f75723063 100644 --- a/drivers/i2c/busses/i2c-cpm.c +++ b/drivers/i2c/busses/i2c-cpm.c @@ -423,7 +423,6 @@ static const struct i2c_adapter cpm_ops = { .owner = THIS_MODULE, .name = "i2c-cpm", .algo = &cpm_i2c_algo, - .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, }; static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm) diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index 7f38c01fb3a0..0ed3ccb81b63 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -104,7 +104,8 @@ static int pcf_isa_getclock(void *data) return (clock); } -static void pcf_isa_waitforpin(void) { +static void pcf_isa_waitforpin(void *data) +{ DEFINE_WAIT(wait); int timeout = 2; unsigned long flags; diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c index 1098f21ace13..648aa7baff83 100644 --- a/drivers/i2c/busses/i2c-hydra.c +++ b/drivers/i2c/busses/i2c-hydra.c @@ -123,7 +123,7 @@ static int __devinit hydra_probe(struct pci_dev *dev, hydra_adap.name)) return -EBUSY; - hydra_bit_data.data = ioremap(base, pci_resource_len(dev, 0)); + hydra_bit_data.data = pci_ioremap_bar(dev, 0); if (hydra_bit_data.data == NULL) { release_mem_region(base+offsetof(struct Hydra, CachePD), 4); return -ENODEV; diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index dc7ea32b69a8..5123eb69a971 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -41,6 +41,7 @@ Tolapai 0x5032 32 hard yes yes yes ICH10 0x3a30 32 hard yes yes yes ICH10 0x3a60 32 hard yes yes yes + PCH 0x3b30 32 hard yes yes yes Features supported by this driver: Software PEC no @@ -576,6 +577,7 @@ static struct pci_device_id i801_ids[] = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TOLAPAI_1) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_4) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_5) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PCH_SMBUS) }, { 0, } }; @@ -599,6 +601,7 @@ static int __devinit i801_probe(struct pci_dev *dev, const struct pci_device_id case PCI_DEVICE_ID_INTEL_TOLAPAI_1: case PCI_DEVICE_ID_INTEL_ICH10_4: case PCI_DEVICE_ID_INTEL_ICH10_5: + case PCI_DEVICE_ID_INTEL_PCH_SMBUS: i801_features |= FEATURE_I2C_BLOCK_READ; /* fall through */ case PCI_DEVICE_ID_INTEL_82801DB_3: diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index 17356827b93d..4c35702830ce 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -1,6 +1,8 @@ # # Miscellaneous I2C chip drivers configuration # +# *** DEPRECATED! Do not add new entries! See Makefile *** +# menu "Miscellaneous I2C Chip support" diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index ca520fa143d6..23d2a31b0a64 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -1,7 +1,8 @@ # # Makefile for miscellaneous I2C chip drivers. # -# Think twice before you add a new driver to this directory. +# Do not add new drivers to this directory! It is DEPRECATED. +# # Device drivers are better grouped according to the functionality they # implement rather than to the bus they are connected to. In particular: # * Hardware monitoring chip drivers go to drivers/hwmon diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 42e852d79ffa..5a485c22660a 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -266,6 +266,9 @@ i2c_new_device(struct i2c_adapter *adap, struct i2c_board_info const *info) client->dev.platform_data = info->platform_data; + if (info->archdata) + client->dev.archdata = *info->archdata; + client->flags = info->flags; client->addr = info->addr; client->irq = info->irq; diff --git a/drivers/ide/Makefile b/drivers/ide/Makefile index 093d3248ca89..9cf92ac939d2 100644 --- a/drivers/ide/Makefile +++ b/drivers/ide/Makefile @@ -18,22 +18,66 @@ ide-core-$(CONFIG_BLK_DEV_IDEACPI) += ide-acpi.o obj-$(CONFIG_IDE) += ide-core.o -ifeq ($(CONFIG_IDE_ARM), y) - ide-arm-core-y += arm/ide_arm.o - obj-y += ide-arm-core.o -endif - -obj-$(CONFIG_IDE) += legacy/ pci/ +obj-$(CONFIG_IDE_ARM) += ide_arm.o + +obj-$(CONFIG_BLK_DEV_ALI14XX) += ali14xx.o +obj-$(CONFIG_BLK_DEV_UMC8672) += umc8672.o +obj-$(CONFIG_BLK_DEV_DTC2278) += dtc2278.o +obj-$(CONFIG_BLK_DEV_HT6560B) += ht6560b.o +obj-$(CONFIG_BLK_DEV_QD65XX) += qd65xx.o +obj-$(CONFIG_BLK_DEV_4DRIVES) += ide-4drives.o + +obj-$(CONFIG_BLK_DEV_GAYLE) += gayle.o +obj-$(CONFIG_BLK_DEV_FALCON_IDE) += falconide.o +obj-$(CONFIG_BLK_DEV_MAC_IDE) += macide.o +obj-$(CONFIG_BLK_DEV_Q40IDE) += q40ide.o +obj-$(CONFIG_BLK_DEV_BUDDHA) += buddha.o + +obj-$(CONFIG_BLK_DEV_AEC62XX) += aec62xx.o +obj-$(CONFIG_BLK_DEV_ALI15X3) += alim15x3.o +obj-$(CONFIG_BLK_DEV_AMD74XX) += amd74xx.o +obj-$(CONFIG_BLK_DEV_ATIIXP) += atiixp.o +obj-$(CONFIG_BLK_DEV_CELLEB) += scc_pata.o +obj-$(CONFIG_BLK_DEV_CMD64X) += cmd64x.o +obj-$(CONFIG_BLK_DEV_CS5520) += cs5520.o +obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o +obj-$(CONFIG_BLK_DEV_CS5535) += cs5535.o +obj-$(CONFIG_BLK_DEV_SC1200) += sc1200.o +obj-$(CONFIG_BLK_DEV_CY82C693) += cy82c693.o +obj-$(CONFIG_BLK_DEV_DELKIN) += delkin_cb.o +obj-$(CONFIG_BLK_DEV_HPT366) += hpt366.o +obj-$(CONFIG_BLK_DEV_IT8213) += it8213.o +obj-$(CONFIG_BLK_DEV_IT821X) += it821x.o +obj-$(CONFIG_BLK_DEV_JMICRON) += jmicron.o +obj-$(CONFIG_BLK_DEV_NS87415) += ns87415.o +obj-$(CONFIG_BLK_DEV_OPTI621) += opti621.o +obj-$(CONFIG_BLK_DEV_PDC202XX_OLD) += pdc202xx_old.o +obj-$(CONFIG_BLK_DEV_PDC202XX_NEW) += pdc202xx_new.o +obj-$(CONFIG_BLK_DEV_PIIX) += piix.o +obj-$(CONFIG_BLK_DEV_RZ1000) += rz1000.o +obj-$(CONFIG_BLK_DEV_SVWKS) += serverworks.o +obj-$(CONFIG_BLK_DEV_SGIIOC4) += sgiioc4.o +obj-$(CONFIG_BLK_DEV_SIIMAGE) += siimage.o +obj-$(CONFIG_BLK_DEV_SIS5513) += sis5513.o +obj-$(CONFIG_BLK_DEV_SL82C105) += sl82c105.o +obj-$(CONFIG_BLK_DEV_SLC90E66) += slc90e66.o +obj-$(CONFIG_BLK_DEV_TC86C001) += tc86c001.o +obj-$(CONFIG_BLK_DEV_TRIFLEX) += triflex.o +obj-$(CONFIG_BLK_DEV_TRM290) += trm290.o +obj-$(CONFIG_BLK_DEV_VIA82CXXX) += via82cxxx.o + +# Must appear at the end of the block +obj-$(CONFIG_BLK_DEV_GENERIC) += ide-pci-generic.o +ide-pci-generic-y += generic.o obj-$(CONFIG_IDEPCI_PCIBUS_ORDER) += ide-scan-pci.o -ifeq ($(CONFIG_BLK_DEV_CMD640), y) - cmd640-core-y += pci/cmd640.o - obj-y += cmd640-core.o -endif +obj-$(CONFIG_BLK_DEV_CMD640) += cmd640.o + +obj-$(CONFIG_BLK_DEV_IDE_PMAC) += pmac.o + +obj-$(CONFIG_IDE_H8300) += ide-h8300.o -obj-$(CONFIG_IDE) += ppc/ -obj-$(CONFIG_IDE_H8300) += h8300/ obj-$(CONFIG_IDE_GENERIC) += ide-generic.o obj-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o @@ -58,14 +102,12 @@ obj-$(CONFIG_IDE_GD) += ide-gd_mod.o obj-$(CONFIG_BLK_DEV_IDECD) += ide-cd_mod.o obj-$(CONFIG_BLK_DEV_IDETAPE) += ide-tape.o -ifeq ($(CONFIG_BLK_DEV_IDECS), y) - ide-cs-core-y += legacy/ide-cs.o - obj-y += ide-cs-core.o -endif +obj-$(CONFIG_BLK_DEV_IDECS) += ide-cs.o -ifeq ($(CONFIG_BLK_DEV_PLATFORM), y) - ide-platform-core-y += legacy/ide_platform.o - obj-y += ide-platform-core.o -endif +obj-$(CONFIG_BLK_DEV_PLATFORM) += ide_platform.o + +obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o +obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o +obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710) += palm_bk3710.o -obj-$(CONFIG_IDE) += arm/ mips/ +obj-$(CONFIG_BLK_DEV_IDE_AU1XXX) += au1xxx-ide.o diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/aec62xx.c index 4142c698e0d3..4142c698e0d3 100644 --- a/drivers/ide/pci/aec62xx.c +++ b/drivers/ide/aec62xx.c diff --git a/drivers/ide/legacy/ali14xx.c b/drivers/ide/ali14xx.c index 90da1f953ed0..90da1f953ed0 100644 --- a/drivers/ide/legacy/ali14xx.c +++ b/drivers/ide/ali14xx.c diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/alim15x3.c index daf9dce39e52..daf9dce39e52 100644 --- a/drivers/ide/pci/alim15x3.c +++ b/drivers/ide/alim15x3.c diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/amd74xx.c index 81ec73134eda..81ec73134eda 100644 --- a/drivers/ide/pci/amd74xx.c +++ b/drivers/ide/amd74xx.c diff --git a/drivers/ide/arm/Makefile b/drivers/ide/arm/Makefile deleted file mode 100644 index 5bc26053afa6..000000000000 --- a/drivers/ide/arm/Makefile +++ /dev/null @@ -1,10 +0,0 @@ - -obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o -obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o -obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710) += palm_bk3710.o - -ifeq ($(CONFIG_IDE_ARM), m) - obj-m += ide_arm.o -endif - -EXTRA_CFLAGS := -Idrivers/ide diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/atiixp.c index b2735d28f5cc..b2735d28f5cc 100644 --- a/drivers/ide/pci/atiixp.c +++ b/drivers/ide/atiixp.c diff --git a/drivers/ide/mips/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c index 0ec8fd1e4dcb..0ec8fd1e4dcb 100644 --- a/drivers/ide/mips/au1xxx-ide.c +++ b/drivers/ide/au1xxx-ide.c diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/buddha.c index c5a3c9ef6a5d..c5a3c9ef6a5d 100644 --- a/drivers/ide/legacy/buddha.c +++ b/drivers/ide/buddha.c diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/cmd640.c index e4306647d00d..e4306647d00d 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/cmd640.c diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/cmd64x.c index 935385c77e06..935385c77e06 100644 --- a/drivers/ide/pci/cmd64x.c +++ b/drivers/ide/cmd64x.c diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/cs5520.c index 5efb467f8fa0..5efb467f8fa0 100644 --- a/drivers/ide/pci/cs5520.c +++ b/drivers/ide/cs5520.c diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/cs5530.c index 53f079cc00af..53f079cc00af 100644 --- a/drivers/ide/pci/cs5530.c +++ b/drivers/ide/cs5530.c diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/cs5535.c index 983d957a0189..983d957a0189 100644 --- a/drivers/ide/pci/cs5535.c +++ b/drivers/ide/cs5535.c diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/cy82c693.c index 5297f07d2933..5297f07d2933 100644 --- a/drivers/ide/pci/cy82c693.c +++ b/drivers/ide/cy82c693.c diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/delkin_cb.c index 8f1b2d9f0513..8f1b2d9f0513 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/delkin_cb.c diff --git a/drivers/ide/legacy/dtc2278.c b/drivers/ide/dtc2278.c index 689b2e493413..689b2e493413 100644 --- a/drivers/ide/legacy/dtc2278.c +++ b/drivers/ide/dtc2278.c diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/falconide.c index 39d500d84b07..39d500d84b07 100644 --- a/drivers/ide/legacy/falconide.c +++ b/drivers/ide/falconide.c diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/gayle.c index 691506886561..691506886561 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/gayle.c diff --git a/drivers/ide/pci/generic.c b/drivers/ide/generic.c index 474f96a7c076..474f96a7c076 100644 --- a/drivers/ide/pci/generic.c +++ b/drivers/ide/generic.c diff --git a/drivers/ide/h8300/Makefile b/drivers/ide/h8300/Makefile deleted file mode 100644 index 5eba16f423f4..000000000000 --- a/drivers/ide/h8300/Makefile +++ /dev/null @@ -1,2 +0,0 @@ - -obj-$(CONFIG_IDE_H8300) += ide-h8300.o diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/hpt366.c index a7909e9c720e..a7909e9c720e 100644 --- a/drivers/ide/pci/hpt366.c +++ b/drivers/ide/hpt366.c diff --git a/drivers/ide/legacy/ht6560b.c b/drivers/ide/ht6560b.c index c7e5c2246b79..c7e5c2246b79 100644 --- a/drivers/ide/legacy/ht6560b.c +++ b/drivers/ide/ht6560b.c diff --git a/drivers/ide/arm/icside.c b/drivers/ide/icside.c index 76bdc9a27f6f..76bdc9a27f6f 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/icside.c diff --git a/drivers/ide/legacy/ide-4drives.c b/drivers/ide/ide-4drives.c index 9e85b1ec9607..9e85b1ec9607 100644 --- a/drivers/ide/legacy/ide-4drives.c +++ b/drivers/ide/ide-4drives.c diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/ide-cs.c index cb199c815b53..cb199c815b53 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/ide-cs.c diff --git a/drivers/ide/h8300/ide-h8300.c b/drivers/ide/ide-h8300.c index e2cdd2e9cdec..e2cdd2e9cdec 100644 --- a/drivers/ide/h8300/ide-h8300.c +++ b/drivers/ide/ide-h8300.c diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/ide_arm.c index f728f2927b5a..f728f2927b5a 100644 --- a/drivers/ide/arm/ide_arm.c +++ b/drivers/ide/ide_arm.c diff --git a/drivers/ide/legacy/ide_platform.c b/drivers/ide/ide_platform.c index 051b4ab0f359..051b4ab0f359 100644 --- a/drivers/ide/legacy/ide_platform.c +++ b/drivers/ide/ide_platform.c diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/it8213.c index 7c2feeb3c5ec..7c2feeb3c5ec 100644 --- a/drivers/ide/pci/it8213.c +++ b/drivers/ide/it8213.c diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/it821x.c index 995e18bb3139..995e18bb3139 100644 --- a/drivers/ide/pci/it821x.c +++ b/drivers/ide/it821x.c diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/jmicron.c index 9a68433cf46d..9a68433cf46d 100644 --- a/drivers/ide/pci/jmicron.c +++ b/drivers/ide/jmicron.c diff --git a/drivers/ide/legacy/Makefile b/drivers/ide/legacy/Makefile deleted file mode 100644 index 6939329f89e8..000000000000 --- a/drivers/ide/legacy/Makefile +++ /dev/null @@ -1,25 +0,0 @@ - -# link order is important here - -obj-$(CONFIG_BLK_DEV_ALI14XX) += ali14xx.o -obj-$(CONFIG_BLK_DEV_UMC8672) += umc8672.o -obj-$(CONFIG_BLK_DEV_DTC2278) += dtc2278.o -obj-$(CONFIG_BLK_DEV_HT6560B) += ht6560b.o -obj-$(CONFIG_BLK_DEV_QD65XX) += qd65xx.o -obj-$(CONFIG_BLK_DEV_4DRIVES) += ide-4drives.o - -obj-$(CONFIG_BLK_DEV_GAYLE) += gayle.o -obj-$(CONFIG_BLK_DEV_FALCON_IDE) += falconide.o -obj-$(CONFIG_BLK_DEV_MAC_IDE) += macide.o -obj-$(CONFIG_BLK_DEV_Q40IDE) += q40ide.o -obj-$(CONFIG_BLK_DEV_BUDDHA) += buddha.o - -ifeq ($(CONFIG_BLK_DEV_IDECS), m) - obj-m += ide-cs.o -endif - -ifeq ($(CONFIG_BLK_DEV_PLATFORM), m) - obj-m += ide_platform.o -endif - -EXTRA_CFLAGS := -Idrivers/ide diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/macide.c index 43f97cc1d30e..43f97cc1d30e 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/macide.c diff --git a/drivers/ide/mips/Makefile b/drivers/ide/mips/Makefile deleted file mode 100644 index 5873fa0b8769..000000000000 --- a/drivers/ide/mips/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-$(CONFIG_BLK_DEV_IDE_AU1XXX) += au1xxx-ide.o - -EXTRA_CFLAGS := -Idrivers/ide diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/ns87415.c index 13789060f407..13789060f407 100644 --- a/drivers/ide/pci/ns87415.c +++ b/drivers/ide/ns87415.c diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/opti621.c index 6048eda3cd61..6048eda3cd61 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/opti621.c diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/palm_bk3710.c index 122ed3c072fd..122ed3c072fd 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/palm_bk3710.c diff --git a/drivers/ide/pci/Makefile b/drivers/ide/pci/Makefile deleted file mode 100644 index ab44a1f5f5a9..000000000000 --- a/drivers/ide/pci/Makefile +++ /dev/null @@ -1,43 +0,0 @@ - -obj-$(CONFIG_BLK_DEV_AEC62XX) += aec62xx.o -obj-$(CONFIG_BLK_DEV_ALI15X3) += alim15x3.o -obj-$(CONFIG_BLK_DEV_AMD74XX) += amd74xx.o -obj-$(CONFIG_BLK_DEV_ATIIXP) += atiixp.o -obj-$(CONFIG_BLK_DEV_CELLEB) += scc_pata.o -obj-$(CONFIG_BLK_DEV_CMD64X) += cmd64x.o -obj-$(CONFIG_BLK_DEV_CS5520) += cs5520.o -obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o -obj-$(CONFIG_BLK_DEV_CS5535) += cs5535.o -obj-$(CONFIG_BLK_DEV_SC1200) += sc1200.o -obj-$(CONFIG_BLK_DEV_CY82C693) += cy82c693.o -obj-$(CONFIG_BLK_DEV_DELKIN) += delkin_cb.o -obj-$(CONFIG_BLK_DEV_HPT366) += hpt366.o -obj-$(CONFIG_BLK_DEV_IT8213) += it8213.o -obj-$(CONFIG_BLK_DEV_IT821X) += it821x.o -obj-$(CONFIG_BLK_DEV_JMICRON) += jmicron.o -obj-$(CONFIG_BLK_DEV_NS87415) += ns87415.o -obj-$(CONFIG_BLK_DEV_OPTI621) += opti621.o -obj-$(CONFIG_BLK_DEV_PDC202XX_OLD) += pdc202xx_old.o -obj-$(CONFIG_BLK_DEV_PDC202XX_NEW) += pdc202xx_new.o -obj-$(CONFIG_BLK_DEV_PIIX) += piix.o -obj-$(CONFIG_BLK_DEV_RZ1000) += rz1000.o -obj-$(CONFIG_BLK_DEV_SVWKS) += serverworks.o -obj-$(CONFIG_BLK_DEV_SGIIOC4) += sgiioc4.o -obj-$(CONFIG_BLK_DEV_SIIMAGE) += siimage.o -obj-$(CONFIG_BLK_DEV_SIS5513) += sis5513.o -obj-$(CONFIG_BLK_DEV_SL82C105) += sl82c105.o -obj-$(CONFIG_BLK_DEV_SLC90E66) += slc90e66.o -obj-$(CONFIG_BLK_DEV_TC86C001) += tc86c001.o -obj-$(CONFIG_BLK_DEV_TRIFLEX) += triflex.o -obj-$(CONFIG_BLK_DEV_TRM290) += trm290.o -obj-$(CONFIG_BLK_DEV_VIA82CXXX) += via82cxxx.o - -# Must appear at the end of the block -obj-$(CONFIG_BLK_DEV_GENERIC) += ide-pci-generic.o -ide-pci-generic-y += generic.o - -ifeq ($(CONFIG_BLK_DEV_CMD640), m) - obj-m += cmd640.o -endif - -EXTRA_CFLAGS := -Idrivers/ide diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pdc202xx_new.c index 211ae46e3e0c..211ae46e3e0c 100644 --- a/drivers/ide/pci/pdc202xx_new.c +++ b/drivers/ide/pdc202xx_new.c diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pdc202xx_old.c index 799557c25eef..799557c25eef 100644 --- a/drivers/ide/pci/pdc202xx_old.c +++ b/drivers/ide/pdc202xx_old.c diff --git a/drivers/ide/pci/piix.c b/drivers/ide/piix.c index d63f9fdca76b..d63f9fdca76b 100644 --- a/drivers/ide/pci/piix.c +++ b/drivers/ide/piix.c diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/pmac.c index 2e19d6298536..2e19d6298536 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/pmac.c diff --git a/drivers/ide/ppc/Makefile b/drivers/ide/ppc/Makefile deleted file mode 100644 index 74e52adcdf4b..000000000000 --- a/drivers/ide/ppc/Makefile +++ /dev/null @@ -1,2 +0,0 @@ - -obj-$(CONFIG_BLK_DEV_IDE_PMAC) += pmac.o diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/q40ide.c index 4af4a8ce4cdf..4af4a8ce4cdf 100644 --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/q40ide.c diff --git a/drivers/ide/legacy/qd65xx.c b/drivers/ide/qd65xx.c index bc27c7aba936..bc27c7aba936 100644 --- a/drivers/ide/legacy/qd65xx.c +++ b/drivers/ide/qd65xx.c diff --git a/drivers/ide/legacy/qd65xx.h b/drivers/ide/qd65xx.h index c83dea85e621..c83dea85e621 100644 --- a/drivers/ide/legacy/qd65xx.h +++ b/drivers/ide/qd65xx.h diff --git a/drivers/ide/arm/rapide.c b/drivers/ide/rapide.c index 78d27d9ae430..78d27d9ae430 100644 --- a/drivers/ide/arm/rapide.c +++ b/drivers/ide/rapide.c diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/rz1000.c index 7daf0135cbac..7daf0135cbac 100644 --- a/drivers/ide/pci/rz1000.c +++ b/drivers/ide/rz1000.c diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/sc1200.c index f1a8758e3a99..f1a8758e3a99 100644 --- a/drivers/ide/pci/sc1200.c +++ b/drivers/ide/sc1200.c diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/scc_pata.c index 49f163aa51e3..49f163aa51e3 100644 --- a/drivers/ide/pci/scc_pata.c +++ b/drivers/ide/scc_pata.c diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/serverworks.c index 437bc919dafd..437bc919dafd 100644 --- a/drivers/ide/pci/serverworks.c +++ b/drivers/ide/serverworks.c diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/sgiioc4.c index 8af9b23499fd..8af9b23499fd 100644 --- a/drivers/ide/pci/sgiioc4.c +++ b/drivers/ide/sgiioc4.c diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/siimage.c index eb4faf92c571..eb4faf92c571 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/siimage.c diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/sis5513.c index ad32e18c5ba3..ad32e18c5ba3 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/sis5513.c diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/sl82c105.c index 84dc33602ff8..84dc33602ff8 100644 --- a/drivers/ide/pci/sl82c105.c +++ b/drivers/ide/sl82c105.c diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/slc90e66.c index 0f759e4ed779..0f759e4ed779 100644 --- a/drivers/ide/pci/slc90e66.c +++ b/drivers/ide/slc90e66.c diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/tc86c001.c index 93e2cce4b296..93e2cce4b296 100644 --- a/drivers/ide/pci/tc86c001.c +++ b/drivers/ide/tc86c001.c diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/triflex.c index b6ff40336aa9..b6ff40336aa9 100644 --- a/drivers/ide/pci/triflex.c +++ b/drivers/ide/triflex.c diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/trm290.c index 75ea61526566..75ea61526566 100644 --- a/drivers/ide/pci/trm290.c +++ b/drivers/ide/trm290.c diff --git a/drivers/ide/legacy/umc8672.c b/drivers/ide/umc8672.c index 1da076e0c917..1da076e0c917 100644 --- a/drivers/ide/legacy/umc8672.c +++ b/drivers/ide/umc8672.c diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/via82cxxx.c index 2a812d3207e9..2a812d3207e9 100644 --- a/drivers/ide/pci/via82cxxx.c +++ b/drivers/ide/via82cxxx.c diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index 49c45feccd5b..5c54fc2350be 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -406,19 +406,15 @@ static int register_snoop_agent(struct ib_mad_qp_info *qp_info, if (i == qp_info->snoop_table_size) { /* Grow table. */ - new_snoop_table = kmalloc(sizeof mad_snoop_priv * - qp_info->snoop_table_size + 1, - GFP_ATOMIC); + new_snoop_table = krealloc(qp_info->snoop_table, + sizeof mad_snoop_priv * + (qp_info->snoop_table_size + 1), + GFP_ATOMIC); if (!new_snoop_table) { i = -ENOMEM; goto out; } - if (qp_info->snoop_table) { - memcpy(new_snoop_table, qp_info->snoop_table, - sizeof mad_snoop_priv * - qp_info->snoop_table_size); - kfree(qp_info->snoop_table); - } + qp_info->snoop_table = new_snoop_table; qp_info->snoop_table_size++; } diff --git a/drivers/infiniband/core/ucma.c b/drivers/infiniband/core/ucma.c index 3ddacf39b7ba..4346a24568fb 100644 --- a/drivers/infiniband/core/ucma.c +++ b/drivers/infiniband/core/ucma.c @@ -904,8 +904,8 @@ static ssize_t ucma_join_multicast(struct ucma_file *file, mutex_lock(&file->mut); mc = ucma_alloc_multicast(ctx); - if (IS_ERR(mc)) { - ret = PTR_ERR(mc); + if (!mc) { + ret = -ENOMEM; goto err1; } diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c index c325c44807e8..44e936e48a31 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_cm.c +++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c @@ -1942,6 +1942,7 @@ fail4: fail3: cxgb3_free_atid(ep->com.tdev, ep->atid); fail2: + cm_id->rem_ref(cm_id); put_ep(&ep->com); out: return err; diff --git a/drivers/infiniband/hw/ehca/ehca_classes.h b/drivers/infiniband/hw/ehca/ehca_classes.h index 5d7b7855afb9..4df887af66a5 100644 --- a/drivers/infiniband/hw/ehca/ehca_classes.h +++ b/drivers/infiniband/hw/ehca/ehca_classes.h @@ -128,6 +128,8 @@ struct ehca_shca { /* MR pgsize: bit 0-3 means 4K, 64K, 1M, 16M respectively */ u32 hca_cap_mr_pgsize; int max_mtu; + int max_num_qps; + int max_num_cqs; atomic_t num_cqs; atomic_t num_qps; }; diff --git a/drivers/infiniband/hw/ehca/ehca_cq.c b/drivers/infiniband/hw/ehca/ehca_cq.c index 33647a95eb9a..2f4c28a30271 100644 --- a/drivers/infiniband/hw/ehca/ehca_cq.c +++ b/drivers/infiniband/hw/ehca/ehca_cq.c @@ -132,9 +132,9 @@ struct ib_cq *ehca_create_cq(struct ib_device *device, int cqe, int comp_vector, if (cqe >= 0xFFFFFFFF - 64 - additional_cqe) return ERR_PTR(-EINVAL); - if (!atomic_add_unless(&shca->num_cqs, 1, ehca_max_cq)) { + if (!atomic_add_unless(&shca->num_cqs, 1, shca->max_num_cqs)) { ehca_err(device, "Unable to create CQ, max number of %i " - "CQs reached.", ehca_max_cq); + "CQs reached.", shca->max_num_cqs); ehca_err(device, "To increase the maximum number of CQs " "use the number_of_cqs module parameter.\n"); return ERR_PTR(-ENOSPC); diff --git a/drivers/infiniband/hw/ehca/ehca_main.c b/drivers/infiniband/hw/ehca/ehca_main.c index 598844d2edc9..bb02a86aa526 100644 --- a/drivers/infiniband/hw/ehca/ehca_main.c +++ b/drivers/infiniband/hw/ehca/ehca_main.c @@ -44,6 +44,8 @@ #include <linux/slab.h> #endif +#include <linux/notifier.h> +#include <linux/memory.h> #include "ehca_classes.h" #include "ehca_iverbs.h" #include "ehca_mrmw.h" @@ -366,22 +368,23 @@ static int ehca_sense_attributes(struct ehca_shca *shca) shca->hca_cap_mr_pgsize |= pgsize_map[i + 1]; /* Set maximum number of CQs and QPs to calculate EQ size */ - if (ehca_max_qp == -1) - ehca_max_qp = min_t(int, rblock->max_qp, EHCA_MAX_NUM_QUEUES); - else if (ehca_max_qp < 1 || ehca_max_qp > rblock->max_qp) { - ehca_gen_err("Requested number of QPs is out of range (1 - %i) " - "specified by HW", rblock->max_qp); - ret = -EINVAL; - goto sense_attributes1; + if (shca->max_num_qps == -1) + shca->max_num_qps = min_t(int, rblock->max_qp, + EHCA_MAX_NUM_QUEUES); + else if (shca->max_num_qps < 1 || shca->max_num_qps > rblock->max_qp) { + ehca_gen_warn("The requested number of QPs is out of range " + "(1 - %i) specified by HW. Value is set to %i", + rblock->max_qp, rblock->max_qp); + shca->max_num_qps = rblock->max_qp; } - if (ehca_max_cq == -1) - ehca_max_cq = min_t(int, rblock->max_cq, EHCA_MAX_NUM_QUEUES); - else if (ehca_max_cq < 1 || ehca_max_cq > rblock->max_cq) { - ehca_gen_err("Requested number of CQs is out of range (1 - %i) " - "specified by HW", rblock->max_cq); - ret = -EINVAL; - goto sense_attributes1; + if (shca->max_num_cqs == -1) + shca->max_num_cqs = min_t(int, rblock->max_cq, + EHCA_MAX_NUM_QUEUES); + else if (shca->max_num_cqs < 1 || shca->max_num_cqs > rblock->max_cq) { + ehca_gen_warn("The requested number of CQs is out of range " + "(1 - %i) specified by HW. Value is set to %i", + rblock->max_cq, rblock->max_cq); } /* query max MTU from first port -- it's the same for all ports */ @@ -733,9 +736,13 @@ static int __devinit ehca_probe(struct of_device *dev, ehca_gen_err("Cannot allocate shca memory."); return -ENOMEM; } + mutex_init(&shca->modify_mutex); atomic_set(&shca->num_cqs, 0); atomic_set(&shca->num_qps, 0); + shca->max_num_qps = ehca_max_qp; + shca->max_num_cqs = ehca_max_cq; + for (i = 0; i < ARRAY_SIZE(shca->sport); i++) spin_lock_init(&shca->sport[i].mod_sqp_lock); @@ -755,7 +762,7 @@ static int __devinit ehca_probe(struct of_device *dev, goto probe1; } - eq_size = 2 * ehca_max_cq + 4 * ehca_max_qp; + eq_size = 2 * shca->max_num_cqs + 4 * shca->max_num_qps; /* create event queues */ ret = ehca_create_eq(shca, &shca->eq, EHCA_EQ, eq_size); if (ret) { @@ -964,6 +971,41 @@ void ehca_poll_eqs(unsigned long data) spin_unlock(&shca_list_lock); } +static int ehca_mem_notifier(struct notifier_block *nb, + unsigned long action, void *data) +{ + static unsigned long ehca_dmem_warn_time; + + switch (action) { + case MEM_CANCEL_OFFLINE: + case MEM_CANCEL_ONLINE: + case MEM_ONLINE: + case MEM_OFFLINE: + return NOTIFY_OK; + case MEM_GOING_ONLINE: + case MEM_GOING_OFFLINE: + /* only ok if no hca is attached to the lpar */ + spin_lock(&shca_list_lock); + if (list_empty(&shca_list)) { + spin_unlock(&shca_list_lock); + return NOTIFY_OK; + } else { + spin_unlock(&shca_list_lock); + if (printk_timed_ratelimit(&ehca_dmem_warn_time, + 30 * 1000)) + ehca_gen_err("DMEM operations are not allowed" + "as long as an ehca adapter is" + "attached to the LPAR"); + return NOTIFY_BAD; + } + } + return NOTIFY_OK; +} + +static struct notifier_block ehca_mem_nb = { + .notifier_call = ehca_mem_notifier, +}; + static int __init ehca_module_init(void) { int ret; @@ -991,6 +1033,12 @@ static int __init ehca_module_init(void) goto module_init2; } + ret = register_memory_notifier(&ehca_mem_nb); + if (ret) { + ehca_gen_err("Failed registering memory add/remove notifier"); + goto module_init3; + } + if (ehca_poll_all_eqs != 1) { ehca_gen_err("WARNING!!!"); ehca_gen_err("It is possible to lose interrupts."); @@ -1003,6 +1051,9 @@ static int __init ehca_module_init(void) return 0; +module_init3: + ibmebus_unregister_driver(&ehca_driver); + module_init2: ehca_destroy_slab_caches(); @@ -1018,6 +1069,8 @@ static void __exit ehca_module_exit(void) ibmebus_unregister_driver(&ehca_driver); + unregister_memory_notifier(&ehca_mem_nb); + ehca_destroy_slab_caches(); ehca_destroy_comp_pool(); diff --git a/drivers/infiniband/hw/ehca/ehca_qp.c b/drivers/infiniband/hw/ehca/ehca_qp.c index 4dbe2870e014..4d54b9f64567 100644 --- a/drivers/infiniband/hw/ehca/ehca_qp.c +++ b/drivers/infiniband/hw/ehca/ehca_qp.c @@ -465,9 +465,9 @@ static struct ehca_qp *internal_create_qp( u32 swqe_size = 0, rwqe_size = 0, ib_qp_num; unsigned long flags; - if (!atomic_add_unless(&shca->num_qps, 1, ehca_max_qp)) { + if (!atomic_add_unless(&shca->num_qps, 1, shca->max_num_qps)) { ehca_err(pd->device, "Unable to create QP, max number of %i " - "QPs reached.", ehca_max_qp); + "QPs reached.", shca->max_num_qps); ehca_err(pd->device, "To increase the maximum number of QPs " "use the number_of_qps module parameter.\n"); return ERR_PTR(-ENOSPC); @@ -502,6 +502,12 @@ static struct ehca_qp *internal_create_qp( if (init_attr->srq) { my_srq = container_of(init_attr->srq, struct ehca_qp, ib_srq); + if (qp_type == IB_QPT_UC) { + ehca_err(pd->device, "UC with SRQ not supported"); + atomic_dec(&shca->num_qps); + return ERR_PTR(-EINVAL); + } + has_srq = 1; parms.ext_type = EQPT_SRQBASE; parms.srq_qpn = my_srq->real_qp_num; diff --git a/drivers/infiniband/hw/mlx4/mad.c b/drivers/infiniband/hw/mlx4/mad.c index cdca3a511e1c..606f1e2ef284 100644 --- a/drivers/infiniband/hw/mlx4/mad.c +++ b/drivers/infiniband/hw/mlx4/mad.c @@ -298,7 +298,7 @@ int mlx4_ib_mad_init(struct mlx4_ib_dev *dev) int p, q; int ret; - for (p = 0; p < dev->dev->caps.num_ports; ++p) + for (p = 0; p < dev->num_ports; ++p) for (q = 0; q <= 1; ++q) { agent = ib_register_mad_agent(&dev->ib_dev, p + 1, q ? IB_QPT_GSI : IB_QPT_SMI, @@ -314,7 +314,7 @@ int mlx4_ib_mad_init(struct mlx4_ib_dev *dev) return 0; err: - for (p = 0; p < dev->dev->caps.num_ports; ++p) + for (p = 0; p < dev->num_ports; ++p) for (q = 0; q <= 1; ++q) if (dev->send_agent[p][q]) ib_unregister_mad_agent(dev->send_agent[p][q]); @@ -327,7 +327,7 @@ void mlx4_ib_mad_cleanup(struct mlx4_ib_dev *dev) struct ib_mad_agent *agent; int p, q; - for (p = 0; p < dev->dev->caps.num_ports; ++p) { + for (p = 0; p < dev->num_ports; ++p) { for (q = 0; q <= 1; ++q) { agent = dev->send_agent[p][q]; dev->send_agent[p][q] = NULL; diff --git a/drivers/infiniband/hw/mlx4/main.c b/drivers/infiniband/hw/mlx4/main.c index a3c2851c0545..2e80f8f47b02 100644 --- a/drivers/infiniband/hw/mlx4/main.c +++ b/drivers/infiniband/hw/mlx4/main.c @@ -574,7 +574,10 @@ static void *mlx4_ib_add(struct mlx4_dev *dev) ibdev->ib_dev.owner = THIS_MODULE; ibdev->ib_dev.node_type = RDMA_NODE_IB_CA; ibdev->ib_dev.local_dma_lkey = dev->caps.reserved_lkey; - ibdev->ib_dev.phys_port_cnt = dev->caps.num_ports; + ibdev->num_ports = 0; + mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_IB) + ibdev->num_ports++; + ibdev->ib_dev.phys_port_cnt = ibdev->num_ports; ibdev->ib_dev.num_comp_vectors = 1; ibdev->ib_dev.dma_device = &dev->pdev->dev; @@ -691,7 +694,7 @@ static void mlx4_ib_remove(struct mlx4_dev *dev, void *ibdev_ptr) struct mlx4_ib_dev *ibdev = ibdev_ptr; int p; - for (p = 1; p <= dev->caps.num_ports; ++p) + for (p = 1; p <= ibdev->num_ports; ++p) mlx4_CLOSE_PORT(dev, p); mlx4_ib_mad_cleanup(ibdev); @@ -706,6 +709,10 @@ static void mlx4_ib_event(struct mlx4_dev *dev, void *ibdev_ptr, enum mlx4_dev_event event, int port) { struct ib_event ibev; + struct mlx4_ib_dev *ibdev = to_mdev((struct ib_device *) ibdev_ptr); + + if (port > ibdev->num_ports) + return; switch (event) { case MLX4_DEV_EVENT_PORT_UP: diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h index 6e2b0dc21b61..9974e886b8de 100644 --- a/drivers/infiniband/hw/mlx4/mlx4_ib.h +++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h @@ -162,6 +162,7 @@ struct mlx4_ib_ah { struct mlx4_ib_dev { struct ib_device ib_dev; struct mlx4_dev *dev; + int num_ports; void __iomem *uar_map; struct mlx4_uar priv_uar; diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index baa01deb2436..39167a797f99 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -451,6 +451,7 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd, struct ib_qp_init_attr *init_attr, struct ib_udata *udata, int sqpn, struct mlx4_ib_qp *qp) { + int qpn; int err; mutex_init(&qp->mutex); @@ -545,9 +546,17 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd, } } - err = mlx4_qp_alloc(dev->dev, sqpn, &qp->mqp); + if (sqpn) { + qpn = sqpn; + } else { + err = mlx4_qp_reserve_range(dev->dev, 1, 1, &qpn); + if (err) + goto err_wrid; + } + + err = mlx4_qp_alloc(dev->dev, qpn, &qp->mqp); if (err) - goto err_wrid; + goto err_qpn; /* * Hardware wants QPN written in big-endian order (after @@ -560,6 +569,10 @@ static int create_qp_common(struct mlx4_ib_dev *dev, struct ib_pd *pd, return 0; +err_qpn: + if (!sqpn) + mlx4_qp_release_range(dev->dev, qpn, 1); + err_wrid: if (pd->uobject) { if (!init_attr->srq) @@ -655,6 +668,10 @@ static void destroy_qp_common(struct mlx4_ib_dev *dev, struct mlx4_ib_qp *qp, mlx4_ib_unlock_cqs(send_cq, recv_cq); mlx4_qp_free(dev->dev, &qp->mqp); + + if (!is_sqp(dev, qp)) + mlx4_qp_release_range(dev->dev, qp->mqp.qpn, 1); + mlx4_mtt_cleanup(dev->dev, &qp->mtt); if (is_user) { diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index 68ba5c3482e4..e0c7dfabf2b4 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -507,6 +507,7 @@ int ipoib_pkey_dev_delay_open(struct net_device *dev); void ipoib_drain_cq(struct net_device *dev); void ipoib_set_ethtool_ops(struct net_device *dev); +int ipoib_set_dev_features(struct ipoib_dev_priv *priv, struct ib_device *hca); #ifdef CONFIG_INFINIBAND_IPOIB_CM diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c b/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c index 66af5c1a76e5..e9795f60e5d6 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ethtool.c @@ -42,6 +42,13 @@ static void ipoib_get_drvinfo(struct net_device *netdev, strncpy(drvinfo->driver, "ipoib", sizeof(drvinfo->driver) - 1); } +static u32 ipoib_get_rx_csum(struct net_device *dev) +{ + struct ipoib_dev_priv *priv = netdev_priv(dev); + return test_bit(IPOIB_FLAG_CSUM, &priv->flags) && + !test_bit(IPOIB_FLAG_ADMIN_CM, &priv->flags); +} + static int ipoib_get_coalesce(struct net_device *dev, struct ethtool_coalesce *coal) { @@ -129,7 +136,7 @@ static void ipoib_get_ethtool_stats(struct net_device *dev, static const struct ethtool_ops ipoib_ethtool_ops = { .get_drvinfo = ipoib_get_drvinfo, - .get_tso = ethtool_op_get_tso, + .get_rx_csum = ipoib_get_rx_csum, .get_coalesce = ipoib_get_coalesce, .set_coalesce = ipoib_set_coalesce, .get_flags = ethtool_op_get_flags, diff --git a/drivers/infiniband/ulp/ipoib/ipoib_ib.c b/drivers/infiniband/ulp/ipoib/ipoib_ib.c index 0e748aeeae99..28eb6f03c588 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_ib.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_ib.c @@ -685,10 +685,6 @@ int ipoib_ib_dev_open(struct net_device *dev) queue_delayed_work(ipoib_workqueue, &priv->ah_reap_task, round_jiffies_relative(HZ)); - init_timer(&priv->poll_timer); - priv->poll_timer.function = ipoib_ib_tx_timer_func; - priv->poll_timer.data = (unsigned long)dev; - set_bit(IPOIB_FLAG_INITIALIZED, &priv->flags); return 0; @@ -906,6 +902,9 @@ int ipoib_ib_dev_init(struct net_device *dev, struct ib_device *ca, int port) return -ENODEV; } + setup_timer(&priv->poll_timer, ipoib_ib_tx_timer_func, + (unsigned long) dev); + if (dev->flags & IFF_UP) { if (ipoib_ib_dev_open(dev)) { ipoib_transport_dev_cleanup(dev); diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index c0ee514396df..fddded7900d1 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -1173,11 +1173,48 @@ int ipoib_add_pkey_attr(struct net_device *dev) return device_create_file(&dev->dev, &dev_attr_pkey); } +int ipoib_set_dev_features(struct ipoib_dev_priv *priv, struct ib_device *hca) +{ + struct ib_device_attr *device_attr; + int result = -ENOMEM; + + device_attr = kmalloc(sizeof *device_attr, GFP_KERNEL); + if (!device_attr) { + printk(KERN_WARNING "%s: allocation of %zu bytes failed\n", + hca->name, sizeof *device_attr); + return result; + } + + result = ib_query_device(hca, device_attr); + if (result) { + printk(KERN_WARNING "%s: ib_query_device failed (ret = %d)\n", + hca->name, result); + kfree(device_attr); + return result; + } + priv->hca_caps = device_attr->device_cap_flags; + + kfree(device_attr); + + if (priv->hca_caps & IB_DEVICE_UD_IP_CSUM) { + set_bit(IPOIB_FLAG_CSUM, &priv->flags); + priv->dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; + } + + if (lro) + priv->dev->features |= NETIF_F_LRO; + + if (priv->dev->features & NETIF_F_SG && priv->hca_caps & IB_DEVICE_UD_TSO) + priv->dev->features |= NETIF_F_TSO; + + return 0; +} + + static struct net_device *ipoib_add_port(const char *format, struct ib_device *hca, u8 port) { struct ipoib_dev_priv *priv; - struct ib_device_attr *device_attr; struct ib_port_attr attr; int result = -ENOMEM; @@ -1206,31 +1243,8 @@ static struct net_device *ipoib_add_port(const char *format, goto device_init_failed; } - device_attr = kmalloc(sizeof *device_attr, GFP_KERNEL); - if (!device_attr) { - printk(KERN_WARNING "%s: allocation of %zu bytes failed\n", - hca->name, sizeof *device_attr); + if (ipoib_set_dev_features(priv, hca)) goto device_init_failed; - } - - result = ib_query_device(hca, device_attr); - if (result) { - printk(KERN_WARNING "%s: ib_query_device failed (ret = %d)\n", - hca->name, result); - kfree(device_attr); - goto device_init_failed; - } - priv->hca_caps = device_attr->device_cap_flags; - - kfree(device_attr); - - if (priv->hca_caps & IB_DEVICE_UD_IP_CSUM) { - set_bit(IPOIB_FLAG_CSUM, &priv->flags); - priv->dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM; - } - - if (lro) - priv->dev->features |= NETIF_F_LRO; /* * Set the full membership bit, so that we join the right @@ -1266,9 +1280,6 @@ static struct net_device *ipoib_add_port(const char *format, goto event_failed; } - if (priv->dev->features & NETIF_F_SG && priv->hca_caps & IB_DEVICE_UD_TSO) - priv->dev->features |= NETIF_F_TSO; - result = register_netdev(priv->dev); if (result) { printk(KERN_WARNING "%s: couldn't register ipoib port %d; error %d\n", diff --git a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c index b08eb56196d3..2cf1a4088718 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_vlan.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_vlan.c @@ -93,6 +93,10 @@ int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey) priv->mcast_mtu = priv->admin_mtu = priv->dev->mtu; set_bit(IPOIB_FLAG_SUBINTERFACE, &priv->flags); + result = ipoib_set_dev_features(priv, ppriv->ca); + if (result) + goto device_init_failed; + priv->pkey = pkey; memcpy(priv->dev->dev_addr, ppriv->dev->dev_addr, INFINIBAND_ALEN); diff --git a/drivers/md/Makefile b/drivers/md/Makefile index f1ef33dfd8cf..1c615804ea76 100644 --- a/drivers/md/Makefile +++ b/drivers/md/Makefile @@ -34,7 +34,7 @@ obj-$(CONFIG_DM_CRYPT) += dm-crypt.o obj-$(CONFIG_DM_DELAY) += dm-delay.o obj-$(CONFIG_DM_MULTIPATH) += dm-multipath.o dm-round-robin.o obj-$(CONFIG_DM_SNAPSHOT) += dm-snapshot.o -obj-$(CONFIG_DM_MIRROR) += dm-mirror.o dm-log.o +obj-$(CONFIG_DM_MIRROR) += dm-mirror.o dm-log.o dm-region-hash.o obj-$(CONFIG_DM_ZERO) += dm-zero.o quiet_cmd_unroll = UNROLL $@ diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 682ef9e6acd3..ce26c84af064 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -23,7 +23,7 @@ #include <asm/page.h> #include <asm/unaligned.h> -#include "dm.h" +#include <linux/device-mapper.h> #define DM_MSG_PREFIX "crypt" #define MESG_STR(x) x, sizeof(x) @@ -56,6 +56,7 @@ struct dm_crypt_io { atomic_t pending; int error; sector_t sector; + struct dm_crypt_io *base_io; }; struct dm_crypt_request { @@ -93,7 +94,6 @@ struct crypt_config { struct workqueue_struct *io_queue; struct workqueue_struct *crypt_queue; - wait_queue_head_t writeq; /* * crypto related data @@ -534,6 +534,7 @@ static struct dm_crypt_io *crypt_io_alloc(struct dm_target *ti, io->base_bio = bio; io->sector = sector; io->error = 0; + io->base_io = NULL; atomic_set(&io->pending, 0); return io; @@ -547,6 +548,7 @@ static void crypt_inc_pending(struct dm_crypt_io *io) /* * One of the bios was finished. Check for completion of * the whole request and correctly clean up the buffer. + * If base_io is set, wait for the last fragment to complete. */ static void crypt_dec_pending(struct dm_crypt_io *io) { @@ -555,7 +557,14 @@ static void crypt_dec_pending(struct dm_crypt_io *io) if (!atomic_dec_and_test(&io->pending)) return; - bio_endio(io->base_bio, io->error); + if (likely(!io->base_io)) + bio_endio(io->base_bio, io->error); + else { + if (io->error && !io->base_io->error) + io->base_io->error = io->error; + crypt_dec_pending(io->base_io); + } + mempool_free(io, cc->io_pool); } @@ -646,10 +655,7 @@ static void kcryptd_io_read(struct dm_crypt_io *io) static void kcryptd_io_write(struct dm_crypt_io *io) { struct bio *clone = io->ctx.bio_out; - struct crypt_config *cc = io->target->private; - generic_make_request(clone); - wake_up(&cc->writeq); } static void kcryptd_io(struct work_struct *work) @@ -688,7 +694,6 @@ static void kcryptd_crypt_write_io_submit(struct dm_crypt_io *io, BUG_ON(io->ctx.idx_out < clone->bi_vcnt); clone->bi_sector = cc->start + io->sector; - io->sector += bio_sectors(clone); if (async) kcryptd_queue_io(io); @@ -700,16 +705,18 @@ static void kcryptd_crypt_write_convert(struct dm_crypt_io *io) { struct crypt_config *cc = io->target->private; struct bio *clone; + struct dm_crypt_io *new_io; int crypt_finished; unsigned out_of_pages = 0; unsigned remaining = io->base_bio->bi_size; + sector_t sector = io->sector; int r; /* * Prevent io from disappearing until this function completes. */ crypt_inc_pending(io); - crypt_convert_init(cc, &io->ctx, NULL, io->base_bio, io->sector); + crypt_convert_init(cc, &io->ctx, NULL, io->base_bio, sector); /* * The allocated buffers can be smaller than the whole bio, @@ -726,6 +733,7 @@ static void kcryptd_crypt_write_convert(struct dm_crypt_io *io) io->ctx.idx_out = 0; remaining -= clone->bi_size; + sector += bio_sectors(clone); crypt_inc_pending(io); r = crypt_convert(cc, &io->ctx); @@ -741,6 +749,8 @@ static void kcryptd_crypt_write_convert(struct dm_crypt_io *io) */ if (unlikely(r < 0)) break; + + io->sector = sector; } /* @@ -750,8 +760,33 @@ static void kcryptd_crypt_write_convert(struct dm_crypt_io *io) if (unlikely(out_of_pages)) congestion_wait(WRITE, HZ/100); - if (unlikely(remaining)) - wait_event(cc->writeq, !atomic_read(&io->ctx.pending)); + /* + * With async crypto it is unsafe to share the crypto context + * between fragments, so switch to a new dm_crypt_io structure. + */ + if (unlikely(!crypt_finished && remaining)) { + new_io = crypt_io_alloc(io->target, io->base_bio, + sector); + crypt_inc_pending(new_io); + crypt_convert_init(cc, &new_io->ctx, NULL, + io->base_bio, sector); + new_io->ctx.idx_in = io->ctx.idx_in; + new_io->ctx.offset_in = io->ctx.offset_in; + + /* + * Fragments after the first use the base_io + * pending count. + */ + if (!io->base_io) + new_io->base_io = io; + else { + new_io->base_io = io->base_io; + crypt_inc_pending(io->base_io); + crypt_dec_pending(io); + } + + io = new_io; + } } crypt_dec_pending(io); @@ -1078,7 +1113,6 @@ static int crypt_ctr(struct dm_target *ti, unsigned int argc, char **argv) goto bad_crypt_queue; } - init_waitqueue_head(&cc->writeq); ti->private = cc; return 0; diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c index bdd37f881c42..848b381f1173 100644 --- a/drivers/md/dm-delay.c +++ b/drivers/md/dm-delay.c @@ -13,7 +13,8 @@ #include <linux/bio.h> #include <linux/slab.h> -#include "dm.h" +#include <linux/device-mapper.h> + #include "dm-bio-list.h" #define DM_MSG_PREFIX "delay" diff --git a/drivers/md/dm-exception-store.c b/drivers/md/dm-exception-store.c index 769ab677f8e0..01590f3e0009 100644 --- a/drivers/md/dm-exception-store.c +++ b/drivers/md/dm-exception-store.c @@ -7,7 +7,6 @@ * This file is released under the GPL. */ -#include "dm.h" #include "dm-snap.h" #include <linux/mm.h> @@ -105,6 +104,11 @@ struct pstore { void *area; /* + * An area of zeros used to clear the next area. + */ + void *zero_area; + + /* * Used to keep track of which metadata area the data in * 'chunk' refers to. */ @@ -149,6 +153,13 @@ static int alloc_area(struct pstore *ps) if (!ps->area) return r; + ps->zero_area = vmalloc(len); + if (!ps->zero_area) { + vfree(ps->area); + return r; + } + memset(ps->zero_area, 0, len); + return 0; } @@ -156,6 +167,8 @@ static void free_area(struct pstore *ps) { vfree(ps->area); ps->area = NULL; + vfree(ps->zero_area); + ps->zero_area = NULL; } struct mdata_req { @@ -220,25 +233,41 @@ static chunk_t area_location(struct pstore *ps, chunk_t area) * Read or write a metadata area. Remembering to skip the first * chunk which holds the header. */ -static int area_io(struct pstore *ps, chunk_t area, int rw) +static int area_io(struct pstore *ps, int rw) { int r; chunk_t chunk; - chunk = area_location(ps, area); + chunk = area_location(ps, ps->current_area); r = chunk_io(ps, chunk, rw, 0); if (r) return r; - ps->current_area = area; return 0; } -static int zero_area(struct pstore *ps, chunk_t area) +static void zero_memory_area(struct pstore *ps) { memset(ps->area, 0, ps->snap->chunk_size << SECTOR_SHIFT); - return area_io(ps, area, WRITE); +} + +static int zero_disk_area(struct pstore *ps, chunk_t area) +{ + struct dm_io_region where = { + .bdev = ps->snap->cow->bdev, + .sector = ps->snap->chunk_size * area_location(ps, area), + .count = ps->snap->chunk_size, + }; + struct dm_io_request io_req = { + .bi_rw = WRITE, + .mem.type = DM_IO_VMA, + .mem.ptr.vma = ps->zero_area, + .client = ps->io_client, + .notify.fn = NULL, + }; + + return dm_io(&io_req, 1, &where, NULL); } static int read_header(struct pstore *ps, int *new_snapshot) @@ -411,15 +440,14 @@ static int insert_exceptions(struct pstore *ps, int *full) static int read_exceptions(struct pstore *ps) { - chunk_t area; int r, full = 1; /* * Keeping reading chunks and inserting exceptions until * we find a partially full area. */ - for (area = 0; full; area++) { - r = area_io(ps, area, READ); + for (ps->current_area = 0; full; ps->current_area++) { + r = area_io(ps, READ); if (r) return r; @@ -428,6 +456,8 @@ static int read_exceptions(struct pstore *ps) return r; } + ps->current_area--; + return 0; } @@ -486,12 +516,13 @@ static int persistent_read_metadata(struct exception_store *store) return r; } - r = zero_area(ps, 0); + ps->current_area = 0; + zero_memory_area(ps); + r = zero_disk_area(ps, 0); if (r) { - DMWARN("zero_area(0) failed"); + DMWARN("zero_disk_area(0) failed"); return r; } - } else { /* * Sanity checks. @@ -551,7 +582,6 @@ static void persistent_commit(struct exception_store *store, void (*callback) (void *, int success), void *callback_context) { - int r; unsigned int i; struct pstore *ps = get_info(store); struct disk_exception de; @@ -572,33 +602,41 @@ static void persistent_commit(struct exception_store *store, cb->context = callback_context; /* - * If there are no more exceptions in flight, or we have - * filled this metadata area we commit the exceptions to - * disk. + * If there are exceptions in flight and we have not yet + * filled this metadata area there's nothing more to do. */ - if (atomic_dec_and_test(&ps->pending_count) || - (ps->current_committed == ps->exceptions_per_area)) { - r = area_io(ps, ps->current_area, WRITE); - if (r) - ps->valid = 0; + if (!atomic_dec_and_test(&ps->pending_count) && + (ps->current_committed != ps->exceptions_per_area)) + return; - /* - * Have we completely filled the current area ? - */ - if (ps->current_committed == ps->exceptions_per_area) { - ps->current_committed = 0; - r = zero_area(ps, ps->current_area + 1); - if (r) - ps->valid = 0; - } + /* + * If we completely filled the current area, then wipe the next one. + */ + if ((ps->current_committed == ps->exceptions_per_area) && + zero_disk_area(ps, ps->current_area + 1)) + ps->valid = 0; - for (i = 0; i < ps->callback_count; i++) { - cb = ps->callbacks + i; - cb->callback(cb->context, r == 0 ? 1 : 0); - } + /* + * Commit exceptions to disk. + */ + if (ps->valid && area_io(ps, WRITE)) + ps->valid = 0; - ps->callback_count = 0; + /* + * Advance to the next area if this one is full. + */ + if (ps->current_committed == ps->exceptions_per_area) { + ps->current_committed = 0; + ps->current_area++; + zero_memory_area(ps); } + + for (i = 0; i < ps->callback_count; i++) { + cb = ps->callbacks + i; + cb->callback(cb->context, ps->valid); + } + + ps->callback_count = 0; } static void persistent_drop(struct exception_store *store) diff --git a/drivers/md/dm-io.c b/drivers/md/dm-io.c index 4789c42d9a3a..2fd6d4450637 100644 --- a/drivers/md/dm-io.c +++ b/drivers/md/dm-io.c @@ -5,7 +5,7 @@ * This file is released under the GPL. */ -#include "dm.h" +#include <linux/device-mapper.h> #include <linux/bio.h> #include <linux/mempool.h> diff --git a/drivers/md/dm-kcopyd.c b/drivers/md/dm-kcopyd.c index 996802b8a452..3073618269ea 100644 --- a/drivers/md/dm-kcopyd.c +++ b/drivers/md/dm-kcopyd.c @@ -22,6 +22,7 @@ #include <linux/vmalloc.h> #include <linux/workqueue.h> #include <linux/mutex.h> +#include <linux/device-mapper.h> #include <linux/dm-kcopyd.h> #include "dm.h" @@ -268,6 +269,17 @@ static void push(struct list_head *jobs, struct kcopyd_job *job) spin_unlock_irqrestore(&kc->job_lock, flags); } + +static void push_head(struct list_head *jobs, struct kcopyd_job *job) +{ + unsigned long flags; + struct dm_kcopyd_client *kc = job->kc; + + spin_lock_irqsave(&kc->job_lock, flags); + list_add(&job->list, jobs); + spin_unlock_irqrestore(&kc->job_lock, flags); +} + /* * These three functions process 1 item from the corresponding * job list. @@ -398,7 +410,7 @@ static int process_jobs(struct list_head *jobs, struct dm_kcopyd_client *kc, * We couldn't service this job ATM, so * push this job back onto the list. */ - push(jobs, job); + push_head(jobs, job); break; } diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c index 6449bcdf84ca..1b29e9136758 100644 --- a/drivers/md/dm-linear.c +++ b/drivers/md/dm-linear.c @@ -5,12 +5,12 @@ */ #include "dm.h" - #include <linux/module.h> #include <linux/init.h> #include <linux/blkdev.h> #include <linux/bio.h> #include <linux/slab.h> +#include <linux/device-mapper.h> #define DM_MSG_PREFIX "linear" diff --git a/drivers/md/dm-log.c b/drivers/md/dm-log.c index 5b48478c79f5..a8c0fc79ca78 100644 --- a/drivers/md/dm-log.c +++ b/drivers/md/dm-log.c @@ -12,7 +12,7 @@ #include <linux/dm-io.h> #include <linux/dm-dirty-log.h> -#include "dm.h" +#include <linux/device-mapper.h> #define DM_MSG_PREFIX "dirty region log" diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c index 9bf3460c5540..abf6e8cfaedb 100644 --- a/drivers/md/dm-mpath.c +++ b/drivers/md/dm-mpath.c @@ -5,7 +5,8 @@ * This file is released under the GPL. */ -#include "dm.h" +#include <linux/device-mapper.h> + #include "dm-path-selector.h" #include "dm-bio-list.h" #include "dm-bio-record.h" diff --git a/drivers/md/dm-path-selector.c b/drivers/md/dm-path-selector.c index ca1bb636a3e4..96ea226155b1 100644 --- a/drivers/md/dm-path-selector.c +++ b/drivers/md/dm-path-selector.c @@ -9,7 +9,8 @@ * Path selector registration. */ -#include "dm.h" +#include <linux/device-mapper.h> + #include "dm-path-selector.h" #include <linux/slab.h> diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c index 29913e42c4ab..92dcc06832a4 100644 --- a/drivers/md/dm-raid1.c +++ b/drivers/md/dm-raid1.c @@ -1,30 +1,30 @@ /* * Copyright (C) 2003 Sistina Software Limited. + * Copyright (C) 2005-2008 Red Hat, Inc. All rights reserved. * * This file is released under the GPL. */ -#include "dm.h" #include "dm-bio-list.h" #include "dm-bio-record.h" -#include <linux/ctype.h> #include <linux/init.h> #include <linux/mempool.h> #include <linux/module.h> #include <linux/pagemap.h> #include <linux/slab.h> -#include <linux/time.h> -#include <linux/vmalloc.h> #include <linux/workqueue.h> -#include <linux/log2.h> -#include <linux/hardirq.h> +#include <linux/device-mapper.h> #include <linux/dm-io.h> #include <linux/dm-dirty-log.h> #include <linux/dm-kcopyd.h> +#include <linux/dm-region-hash.h> #define DM_MSG_PREFIX "raid1" + +#define MAX_RECOVERY 1 /* Maximum number of regions recovered in parallel. */ #define DM_IO_PAGES 64 +#define DM_KCOPYD_PAGES 64 #define DM_RAID1_HANDLE_ERRORS 0x01 #define errors_handled(p) ((p)->features & DM_RAID1_HANDLE_ERRORS) @@ -32,87 +32,6 @@ static DECLARE_WAIT_QUEUE_HEAD(_kmirrord_recovery_stopped); /*----------------------------------------------------------------- - * Region hash - * - * The mirror splits itself up into discrete regions. Each - * region can be in one of three states: clean, dirty, - * nosync. There is no need to put clean regions in the hash. - * - * In addition to being present in the hash table a region _may_ - * be present on one of three lists. - * - * clean_regions: Regions on this list have no io pending to - * them, they are in sync, we are no longer interested in them, - * they are dull. rh_update_states() will remove them from the - * hash table. - * - * quiesced_regions: These regions have been spun down, ready - * for recovery. rh_recovery_start() will remove regions from - * this list and hand them to kmirrord, which will schedule the - * recovery io with kcopyd. - * - * recovered_regions: Regions that kcopyd has successfully - * recovered. rh_update_states() will now schedule any delayed - * io, up the recovery_count, and remove the region from the - * hash. - * - * There are 2 locks: - * A rw spin lock 'hash_lock' protects just the hash table, - * this is never held in write mode from interrupt context, - * which I believe means that we only have to disable irqs when - * doing a write lock. - * - * An ordinary spin lock 'region_lock' that protects the three - * lists in the region_hash, with the 'state', 'list' and - * 'bhs_delayed' fields of the regions. This is used from irq - * context, so all other uses will have to suspend local irqs. - *---------------------------------------------------------------*/ -struct mirror_set; -struct region_hash { - struct mirror_set *ms; - uint32_t region_size; - unsigned region_shift; - - /* holds persistent region state */ - struct dm_dirty_log *log; - - /* hash table */ - rwlock_t hash_lock; - mempool_t *region_pool; - unsigned int mask; - unsigned int nr_buckets; - struct list_head *buckets; - - spinlock_t region_lock; - atomic_t recovery_in_flight; - struct semaphore recovery_count; - struct list_head clean_regions; - struct list_head quiesced_regions; - struct list_head recovered_regions; - struct list_head failed_recovered_regions; -}; - -enum { - RH_CLEAN, - RH_DIRTY, - RH_NOSYNC, - RH_RECOVERING -}; - -struct region { - struct region_hash *rh; /* FIXME: can we get rid of this ? */ - region_t key; - int state; - - struct list_head hash_list; - struct list_head list; - - atomic_t pending; - struct bio_list delayed_bios; -}; - - -/*----------------------------------------------------------------- * Mirror set structures. *---------------------------------------------------------------*/ enum dm_raid1_error { @@ -132,8 +51,7 @@ struct mirror { struct mirror_set { struct dm_target *ti; struct list_head list; - struct region_hash rh; - struct dm_kcopyd_client *kcopyd_client; + uint64_t features; spinlock_t lock; /* protects the lists */ @@ -141,6 +59,8 @@ struct mirror_set { struct bio_list writes; struct bio_list failures; + struct dm_region_hash *rh; + struct dm_kcopyd_client *kcopyd_client; struct dm_io_client *io_client; mempool_t *read_record_pool; @@ -159,25 +79,14 @@ struct mirror_set { struct work_struct trigger_event; - unsigned int nr_mirrors; + unsigned nr_mirrors; struct mirror mirror[0]; }; -/* - * Conversion fns - */ -static inline region_t bio_to_region(struct region_hash *rh, struct bio *bio) -{ - return (bio->bi_sector - rh->ms->ti->begin) >> rh->region_shift; -} - -static inline sector_t region_to_sector(struct region_hash *rh, region_t region) +static void wakeup_mirrord(void *context) { - return region << rh->region_shift; -} + struct mirror_set *ms = context; -static void wake(struct mirror_set *ms) -{ queue_work(ms->kmirrord_wq, &ms->kmirrord_work); } @@ -186,7 +95,7 @@ static void delayed_wake_fn(unsigned long data) struct mirror_set *ms = (struct mirror_set *) data; clear_bit(0, &ms->timer_pending); - wake(ms); + wakeup_mirrord(ms); } static void delayed_wake(struct mirror_set *ms) @@ -200,473 +109,34 @@ static void delayed_wake(struct mirror_set *ms) add_timer(&ms->timer); } -/* FIXME move this */ -static void queue_bio(struct mirror_set *ms, struct bio *bio, int rw); - -#define MIN_REGIONS 64 -#define MAX_RECOVERY 1 -static int rh_init(struct region_hash *rh, struct mirror_set *ms, - struct dm_dirty_log *log, uint32_t region_size, - region_t nr_regions) +static void wakeup_all_recovery_waiters(void *context) { - unsigned int nr_buckets, max_buckets; - size_t i; - - /* - * Calculate a suitable number of buckets for our hash - * table. - */ - max_buckets = nr_regions >> 6; - for (nr_buckets = 128u; nr_buckets < max_buckets; nr_buckets <<= 1) - ; - nr_buckets >>= 1; - - rh->ms = ms; - rh->log = log; - rh->region_size = region_size; - rh->region_shift = ffs(region_size) - 1; - rwlock_init(&rh->hash_lock); - rh->mask = nr_buckets - 1; - rh->nr_buckets = nr_buckets; - - rh->buckets = vmalloc(nr_buckets * sizeof(*rh->buckets)); - if (!rh->buckets) { - DMERR("unable to allocate region hash memory"); - return -ENOMEM; - } - - for (i = 0; i < nr_buckets; i++) - INIT_LIST_HEAD(rh->buckets + i); - - spin_lock_init(&rh->region_lock); - sema_init(&rh->recovery_count, 0); - atomic_set(&rh->recovery_in_flight, 0); - INIT_LIST_HEAD(&rh->clean_regions); - INIT_LIST_HEAD(&rh->quiesced_regions); - INIT_LIST_HEAD(&rh->recovered_regions); - INIT_LIST_HEAD(&rh->failed_recovered_regions); - - rh->region_pool = mempool_create_kmalloc_pool(MIN_REGIONS, - sizeof(struct region)); - if (!rh->region_pool) { - vfree(rh->buckets); - rh->buckets = NULL; - return -ENOMEM; - } - - return 0; + wake_up_all(&_kmirrord_recovery_stopped); } -static void rh_exit(struct region_hash *rh) -{ - unsigned int h; - struct region *reg, *nreg; - - BUG_ON(!list_empty(&rh->quiesced_regions)); - for (h = 0; h < rh->nr_buckets; h++) { - list_for_each_entry_safe(reg, nreg, rh->buckets + h, hash_list) { - BUG_ON(atomic_read(®->pending)); - mempool_free(reg, rh->region_pool); - } - } - - if (rh->log) - dm_dirty_log_destroy(rh->log); - if (rh->region_pool) - mempool_destroy(rh->region_pool); - vfree(rh->buckets); -} - -#define RH_HASH_MULT 2654435387U - -static inline unsigned int rh_hash(struct region_hash *rh, region_t region) -{ - return (unsigned int) ((region * RH_HASH_MULT) >> 12) & rh->mask; -} - -static struct region *__rh_lookup(struct region_hash *rh, region_t region) -{ - struct region *reg; - - list_for_each_entry (reg, rh->buckets + rh_hash(rh, region), hash_list) - if (reg->key == region) - return reg; - - return NULL; -} - -static void __rh_insert(struct region_hash *rh, struct region *reg) -{ - unsigned int h = rh_hash(rh, reg->key); - list_add(®->hash_list, rh->buckets + h); -} - -static struct region *__rh_alloc(struct region_hash *rh, region_t region) -{ - struct region *reg, *nreg; - - read_unlock(&rh->hash_lock); - nreg = mempool_alloc(rh->region_pool, GFP_ATOMIC); - if (unlikely(!nreg)) - nreg = kmalloc(sizeof(struct region), GFP_NOIO); - nreg->state = rh->log->type->in_sync(rh->log, region, 1) ? - RH_CLEAN : RH_NOSYNC; - nreg->rh = rh; - nreg->key = region; - - INIT_LIST_HEAD(&nreg->list); - - atomic_set(&nreg->pending, 0); - bio_list_init(&nreg->delayed_bios); - write_lock_irq(&rh->hash_lock); - - reg = __rh_lookup(rh, region); - if (reg) - /* we lost the race */ - mempool_free(nreg, rh->region_pool); - - else { - __rh_insert(rh, nreg); - if (nreg->state == RH_CLEAN) { - spin_lock(&rh->region_lock); - list_add(&nreg->list, &rh->clean_regions); - spin_unlock(&rh->region_lock); - } - reg = nreg; - } - write_unlock_irq(&rh->hash_lock); - read_lock(&rh->hash_lock); - - return reg; -} - -static inline struct region *__rh_find(struct region_hash *rh, region_t region) -{ - struct region *reg; - - reg = __rh_lookup(rh, region); - if (!reg) - reg = __rh_alloc(rh, region); - - return reg; -} - -static int rh_state(struct region_hash *rh, region_t region, int may_block) -{ - int r; - struct region *reg; - - read_lock(&rh->hash_lock); - reg = __rh_lookup(rh, region); - read_unlock(&rh->hash_lock); - - if (reg) - return reg->state; - - /* - * The region wasn't in the hash, so we fall back to the - * dirty log. - */ - r = rh->log->type->in_sync(rh->log, region, may_block); - - /* - * Any error from the dirty log (eg. -EWOULDBLOCK) gets - * taken as a RH_NOSYNC - */ - return r == 1 ? RH_CLEAN : RH_NOSYNC; -} - -static inline int rh_in_sync(struct region_hash *rh, - region_t region, int may_block) -{ - int state = rh_state(rh, region, may_block); - return state == RH_CLEAN || state == RH_DIRTY; -} - -static void dispatch_bios(struct mirror_set *ms, struct bio_list *bio_list) -{ - struct bio *bio; - - while ((bio = bio_list_pop(bio_list))) { - queue_bio(ms, bio, WRITE); - } -} - -static void complete_resync_work(struct region *reg, int success) -{ - struct region_hash *rh = reg->rh; - - rh->log->type->set_region_sync(rh->log, reg->key, success); - - /* - * Dispatch the bios before we call 'wake_up_all'. - * This is important because if we are suspending, - * we want to know that recovery is complete and - * the work queue is flushed. If we wake_up_all - * before we dispatch_bios (queue bios and call wake()), - * then we risk suspending before the work queue - * has been properly flushed. - */ - dispatch_bios(rh->ms, ®->delayed_bios); - if (atomic_dec_and_test(&rh->recovery_in_flight)) - wake_up_all(&_kmirrord_recovery_stopped); - up(&rh->recovery_count); -} - -static void rh_update_states(struct region_hash *rh) -{ - struct region *reg, *next; - - LIST_HEAD(clean); - LIST_HEAD(recovered); - LIST_HEAD(failed_recovered); - - /* - * Quickly grab the lists. - */ - write_lock_irq(&rh->hash_lock); - spin_lock(&rh->region_lock); - if (!list_empty(&rh->clean_regions)) { - list_splice_init(&rh->clean_regions, &clean); - - list_for_each_entry(reg, &clean, list) - list_del(®->hash_list); - } - - if (!list_empty(&rh->recovered_regions)) { - list_splice_init(&rh->recovered_regions, &recovered); - - list_for_each_entry (reg, &recovered, list) - list_del(®->hash_list); - } - - if (!list_empty(&rh->failed_recovered_regions)) { - list_splice_init(&rh->failed_recovered_regions, - &failed_recovered); - - list_for_each_entry(reg, &failed_recovered, list) - list_del(®->hash_list); - } - - spin_unlock(&rh->region_lock); - write_unlock_irq(&rh->hash_lock); - - /* - * All the regions on the recovered and clean lists have - * now been pulled out of the system, so no need to do - * any more locking. - */ - list_for_each_entry_safe (reg, next, &recovered, list) { - rh->log->type->clear_region(rh->log, reg->key); - complete_resync_work(reg, 1); - mempool_free(reg, rh->region_pool); - } - - list_for_each_entry_safe(reg, next, &failed_recovered, list) { - complete_resync_work(reg, errors_handled(rh->ms) ? 0 : 1); - mempool_free(reg, rh->region_pool); - } - - list_for_each_entry_safe(reg, next, &clean, list) { - rh->log->type->clear_region(rh->log, reg->key); - mempool_free(reg, rh->region_pool); - } - - rh->log->type->flush(rh->log); -} - -static void rh_inc(struct region_hash *rh, region_t region) -{ - struct region *reg; - - read_lock(&rh->hash_lock); - reg = __rh_find(rh, region); - - spin_lock_irq(&rh->region_lock); - atomic_inc(®->pending); - - if (reg->state == RH_CLEAN) { - reg->state = RH_DIRTY; - list_del_init(®->list); /* take off the clean list */ - spin_unlock_irq(&rh->region_lock); - - rh->log->type->mark_region(rh->log, reg->key); - } else - spin_unlock_irq(&rh->region_lock); - - - read_unlock(&rh->hash_lock); -} - -static void rh_inc_pending(struct region_hash *rh, struct bio_list *bios) -{ - struct bio *bio; - - for (bio = bios->head; bio; bio = bio->bi_next) - rh_inc(rh, bio_to_region(rh, bio)); -} - -static void rh_dec(struct region_hash *rh, region_t region) +static void queue_bio(struct mirror_set *ms, struct bio *bio, int rw) { unsigned long flags; - struct region *reg; int should_wake = 0; + struct bio_list *bl; - read_lock(&rh->hash_lock); - reg = __rh_lookup(rh, region); - read_unlock(&rh->hash_lock); - - spin_lock_irqsave(&rh->region_lock, flags); - if (atomic_dec_and_test(®->pending)) { - /* - * There is no pending I/O for this region. - * We can move the region to corresponding list for next action. - * At this point, the region is not yet connected to any list. - * - * If the state is RH_NOSYNC, the region should be kept off - * from clean list. - * The hash entry for RH_NOSYNC will remain in memory - * until the region is recovered or the map is reloaded. - */ - - /* do nothing for RH_NOSYNC */ - if (reg->state == RH_RECOVERING) { - list_add_tail(®->list, &rh->quiesced_regions); - } else if (reg->state == RH_DIRTY) { - reg->state = RH_CLEAN; - list_add(®->list, &rh->clean_regions); - } - should_wake = 1; - } - spin_unlock_irqrestore(&rh->region_lock, flags); + bl = (rw == WRITE) ? &ms->writes : &ms->reads; + spin_lock_irqsave(&ms->lock, flags); + should_wake = !(bl->head); + bio_list_add(bl, bio); + spin_unlock_irqrestore(&ms->lock, flags); if (should_wake) - wake(rh->ms); -} - -/* - * Starts quiescing a region in preparation for recovery. - */ -static int __rh_recovery_prepare(struct region_hash *rh) -{ - int r; - struct region *reg; - region_t region; - - /* - * Ask the dirty log what's next. - */ - r = rh->log->type->get_resync_work(rh->log, ®ion); - if (r <= 0) - return r; - - /* - * Get this region, and start it quiescing by setting the - * recovering flag. - */ - read_lock(&rh->hash_lock); - reg = __rh_find(rh, region); - read_unlock(&rh->hash_lock); - - spin_lock_irq(&rh->region_lock); - reg->state = RH_RECOVERING; - - /* Already quiesced ? */ - if (atomic_read(®->pending)) - list_del_init(®->list); - else - list_move(®->list, &rh->quiesced_regions); - - spin_unlock_irq(&rh->region_lock); - - return 1; -} - -static void rh_recovery_prepare(struct region_hash *rh) -{ - /* Extra reference to avoid race with rh_stop_recovery */ - atomic_inc(&rh->recovery_in_flight); - - while (!down_trylock(&rh->recovery_count)) { - atomic_inc(&rh->recovery_in_flight); - if (__rh_recovery_prepare(rh) <= 0) { - atomic_dec(&rh->recovery_in_flight); - up(&rh->recovery_count); - break; - } - } - - /* Drop the extra reference */ - if (atomic_dec_and_test(&rh->recovery_in_flight)) - wake_up_all(&_kmirrord_recovery_stopped); -} - -/* - * Returns any quiesced regions. - */ -static struct region *rh_recovery_start(struct region_hash *rh) -{ - struct region *reg = NULL; - - spin_lock_irq(&rh->region_lock); - if (!list_empty(&rh->quiesced_regions)) { - reg = list_entry(rh->quiesced_regions.next, - struct region, list); - list_del_init(®->list); /* remove from the quiesced list */ - } - spin_unlock_irq(&rh->region_lock); - - return reg; -} - -static void rh_recovery_end(struct region *reg, int success) -{ - struct region_hash *rh = reg->rh; - - spin_lock_irq(&rh->region_lock); - if (success) - list_add(®->list, ®->rh->recovered_regions); - else { - reg->state = RH_NOSYNC; - list_add(®->list, ®->rh->failed_recovered_regions); - } - spin_unlock_irq(&rh->region_lock); - - wake(rh->ms); + wakeup_mirrord(ms); } -static int rh_flush(struct region_hash *rh) +static void dispatch_bios(void *context, struct bio_list *bio_list) { - return rh->log->type->flush(rh->log); -} - -static void rh_delay(struct region_hash *rh, struct bio *bio) -{ - struct region *reg; - - read_lock(&rh->hash_lock); - reg = __rh_find(rh, bio_to_region(rh, bio)); - bio_list_add(®->delayed_bios, bio); - read_unlock(&rh->hash_lock); -} - -static void rh_stop_recovery(struct region_hash *rh) -{ - int i; - - /* wait for any recovering regions */ - for (i = 0; i < MAX_RECOVERY; i++) - down(&rh->recovery_count); -} - -static void rh_start_recovery(struct region_hash *rh) -{ - int i; - - for (i = 0; i < MAX_RECOVERY; i++) - up(&rh->recovery_count); + struct mirror_set *ms = context; + struct bio *bio; - wake(rh->ms); + while ((bio = bio_list_pop(bio_list))) + queue_bio(ms, bio, WRITE); } #define MIN_READ_RECORDS 20 @@ -776,8 +246,8 @@ out: static void recovery_complete(int read_err, unsigned long write_err, void *context) { - struct region *reg = (struct region *)context; - struct mirror_set *ms = reg->rh->ms; + struct dm_region *reg = context; + struct mirror_set *ms = dm_rh_region_context(reg); int m, bit = 0; if (read_err) { @@ -803,31 +273,33 @@ static void recovery_complete(int read_err, unsigned long write_err, } } - rh_recovery_end(reg, !(read_err || write_err)); + dm_rh_recovery_end(reg, !(read_err || write_err)); } -static int recover(struct mirror_set *ms, struct region *reg) +static int recover(struct mirror_set *ms, struct dm_region *reg) { int r; - unsigned int i; + unsigned i; struct dm_io_region from, to[DM_KCOPYD_MAX_REGIONS], *dest; struct mirror *m; unsigned long flags = 0; + region_t key = dm_rh_get_region_key(reg); + sector_t region_size = dm_rh_get_region_size(ms->rh); /* fill in the source */ m = get_default_mirror(ms); from.bdev = m->dev->bdev; - from.sector = m->offset + region_to_sector(reg->rh, reg->key); - if (reg->key == (ms->nr_regions - 1)) { + from.sector = m->offset + dm_rh_region_to_sector(ms->rh, key); + if (key == (ms->nr_regions - 1)) { /* * The final region may be smaller than * region_size. */ - from.count = ms->ti->len & (reg->rh->region_size - 1); + from.count = ms->ti->len & (region_size - 1); if (!from.count) - from.count = reg->rh->region_size; + from.count = region_size; } else - from.count = reg->rh->region_size; + from.count = region_size; /* fill in the destinations */ for (i = 0, dest = to; i < ms->nr_mirrors; i++) { @@ -836,7 +308,7 @@ static int recover(struct mirror_set *ms, struct region *reg) m = ms->mirror + i; dest->bdev = m->dev->bdev; - dest->sector = m->offset + region_to_sector(reg->rh, reg->key); + dest->sector = m->offset + dm_rh_region_to_sector(ms->rh, key); dest->count = from.count; dest++; } @@ -853,22 +325,22 @@ static int recover(struct mirror_set *ms, struct region *reg) static void do_recovery(struct mirror_set *ms) { + struct dm_region *reg; + struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); int r; - struct region *reg; - struct dm_dirty_log *log = ms->rh.log; /* * Start quiescing some regions. */ - rh_recovery_prepare(&ms->rh); + dm_rh_recovery_prepare(ms->rh); /* * Copy any already quiesced regions. */ - while ((reg = rh_recovery_start(&ms->rh))) { + while ((reg = dm_rh_recovery_start(ms->rh))) { r = recover(ms, reg); if (r) - rh_recovery_end(reg, 0); + dm_rh_recovery_end(reg, 0); } /* @@ -909,9 +381,10 @@ static int default_ok(struct mirror *m) static int mirror_available(struct mirror_set *ms, struct bio *bio) { - region_t region = bio_to_region(&ms->rh, bio); + struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); + region_t region = dm_rh_bio_to_region(ms->rh, bio); - if (ms->rh.log->type->in_sync(ms->rh.log, region, 0)) + if (log->type->in_sync(log, region, 0)) return choose_mirror(ms, bio->bi_sector) ? 1 : 0; return 0; @@ -985,7 +458,14 @@ static void read_async_bio(struct mirror *m, struct bio *bio) map_region(&io, m, bio); bio_set_m(bio, m); - (void) dm_io(&io_req, 1, &io, NULL); + BUG_ON(dm_io(&io_req, 1, &io, NULL)); +} + +static inline int region_in_sync(struct mirror_set *ms, region_t region, + int may_block) +{ + int state = dm_rh_get_state(ms->rh, region, may_block); + return state == DM_RH_CLEAN || state == DM_RH_DIRTY; } static void do_reads(struct mirror_set *ms, struct bio_list *reads) @@ -995,13 +475,13 @@ static void do_reads(struct mirror_set *ms, struct bio_list *reads) struct mirror *m; while ((bio = bio_list_pop(reads))) { - region = bio_to_region(&ms->rh, bio); + region = dm_rh_bio_to_region(ms->rh, bio); m = get_default_mirror(ms); /* * We can only read balance if the region is in sync. */ - if (likely(rh_in_sync(&ms->rh, region, 1))) + if (likely(region_in_sync(ms, region, 1))) m = choose_mirror(ms, bio->bi_sector); else if (m && atomic_read(&m->error_count)) m = NULL; @@ -1024,57 +504,6 @@ static void do_reads(struct mirror_set *ms, struct bio_list *reads) * NOSYNC: increment pending, just write to the default mirror *---------------------------------------------------------------*/ -/* __bio_mark_nosync - * @ms - * @bio - * @done - * @error - * - * The bio was written on some mirror(s) but failed on other mirror(s). - * We can successfully endio the bio but should avoid the region being - * marked clean by setting the state RH_NOSYNC. - * - * This function is _not_ safe in interrupt context! - */ -static void __bio_mark_nosync(struct mirror_set *ms, - struct bio *bio, unsigned done, int error) -{ - unsigned long flags; - struct region_hash *rh = &ms->rh; - struct dm_dirty_log *log = ms->rh.log; - struct region *reg; - region_t region = bio_to_region(rh, bio); - int recovering = 0; - - /* We must inform the log that the sync count has changed. */ - log->type->set_region_sync(log, region, 0); - ms->in_sync = 0; - - read_lock(&rh->hash_lock); - reg = __rh_find(rh, region); - read_unlock(&rh->hash_lock); - - /* region hash entry should exist because write was in-flight */ - BUG_ON(!reg); - BUG_ON(!list_empty(®->list)); - - spin_lock_irqsave(&rh->region_lock, flags); - /* - * Possible cases: - * 1) RH_DIRTY - * 2) RH_NOSYNC: was dirty, other preceeding writes failed - * 3) RH_RECOVERING: flushing pending writes - * Either case, the region should have not been connected to list. - */ - recovering = (reg->state == RH_RECOVERING); - reg->state = RH_NOSYNC; - BUG_ON(!list_empty(®->list)); - spin_unlock_irqrestore(&rh->region_lock, flags); - - bio_endio(bio, error); - if (recovering) - complete_resync_work(reg, 0); -} static void write_callback(unsigned long error, void *context) { @@ -1119,7 +548,7 @@ static void write_callback(unsigned long error, void *context) bio_list_add(&ms->failures, bio); spin_unlock_irqrestore(&ms->lock, flags); if (should_wake) - wake(ms); + wakeup_mirrord(ms); return; } out: @@ -1149,7 +578,7 @@ static void do_write(struct mirror_set *ms, struct bio *bio) */ bio_set_m(bio, get_default_mirror(ms)); - (void) dm_io(&io_req, ms->nr_mirrors, io, NULL); + BUG_ON(dm_io(&io_req, ms->nr_mirrors, io, NULL)); } static void do_writes(struct mirror_set *ms, struct bio_list *writes) @@ -1169,18 +598,19 @@ static void do_writes(struct mirror_set *ms, struct bio_list *writes) bio_list_init(&recover); while ((bio = bio_list_pop(writes))) { - state = rh_state(&ms->rh, bio_to_region(&ms->rh, bio), 1); + state = dm_rh_get_state(ms->rh, + dm_rh_bio_to_region(ms->rh, bio), 1); switch (state) { - case RH_CLEAN: - case RH_DIRTY: + case DM_RH_CLEAN: + case DM_RH_DIRTY: this_list = &sync; break; - case RH_NOSYNC: + case DM_RH_NOSYNC: this_list = &nosync; break; - case RH_RECOVERING: + case DM_RH_RECOVERING: this_list = &recover; break; } @@ -1193,9 +623,9 @@ static void do_writes(struct mirror_set *ms, struct bio_list *writes) * be written to (writes to recover regions are going to * be delayed). */ - rh_inc_pending(&ms->rh, &sync); - rh_inc_pending(&ms->rh, &nosync); - ms->log_failure = rh_flush(&ms->rh) ? 1 : 0; + dm_rh_inc_pending(ms->rh, &sync); + dm_rh_inc_pending(ms->rh, &nosync); + ms->log_failure = dm_rh_flush(ms->rh) ? 1 : 0; /* * Dispatch io. @@ -1204,13 +634,13 @@ static void do_writes(struct mirror_set *ms, struct bio_list *writes) spin_lock_irq(&ms->lock); bio_list_merge(&ms->failures, &sync); spin_unlock_irq(&ms->lock); - wake(ms); + wakeup_mirrord(ms); } else while ((bio = bio_list_pop(&sync))) do_write(ms, bio); while ((bio = bio_list_pop(&recover))) - rh_delay(&ms->rh, bio); + dm_rh_delay(ms->rh, bio); while ((bio = bio_list_pop(&nosync))) { map_bio(get_default_mirror(ms), bio); @@ -1227,7 +657,8 @@ static void do_failures(struct mirror_set *ms, struct bio_list *failures) if (!ms->log_failure) { while ((bio = bio_list_pop(failures))) - __bio_mark_nosync(ms, bio, bio->bi_size, 0); + ms->in_sync = 0; + dm_rh_mark_nosync(ms->rh, bio, bio->bi_size, 0); return; } @@ -1280,8 +711,8 @@ static void trigger_event(struct work_struct *work) *---------------------------------------------------------------*/ static void do_mirror(struct work_struct *work) { - struct mirror_set *ms =container_of(work, struct mirror_set, - kmirrord_work); + struct mirror_set *ms = container_of(work, struct mirror_set, + kmirrord_work); struct bio_list reads, writes, failures; unsigned long flags; @@ -1294,7 +725,7 @@ static void do_mirror(struct work_struct *work) bio_list_init(&ms->failures); spin_unlock_irqrestore(&ms->lock, flags); - rh_update_states(&ms->rh); + dm_rh_update_states(ms->rh, errors_handled(ms)); do_recovery(ms); do_reads(ms, &reads); do_writes(ms, &writes); @@ -1303,7 +734,6 @@ static void do_mirror(struct work_struct *work) dm_table_unplug_all(ms->ti->table); } - /*----------------------------------------------------------------- * Target functions *---------------------------------------------------------------*/ @@ -1315,9 +745,6 @@ static struct mirror_set *alloc_context(unsigned int nr_mirrors, size_t len; struct mirror_set *ms = NULL; - if (array_too_big(sizeof(*ms), sizeof(ms->mirror[0]), nr_mirrors)) - return NULL; - len = sizeof(*ms) + (sizeof(ms->mirror[0]) * nr_mirrors); ms = kzalloc(len, GFP_KERNEL); @@ -1353,7 +780,11 @@ static struct mirror_set *alloc_context(unsigned int nr_mirrors, return NULL; } - if (rh_init(&ms->rh, ms, dl, region_size, ms->nr_regions)) { + ms->rh = dm_region_hash_create(ms, dispatch_bios, wakeup_mirrord, + wakeup_all_recovery_waiters, + ms->ti->begin, MAX_RECOVERY, + dl, region_size, ms->nr_regions); + if (IS_ERR(ms->rh)) { ti->error = "Error creating dirty region hash"; dm_io_client_destroy(ms->io_client); mempool_destroy(ms->read_record_pool); @@ -1371,7 +802,7 @@ static void free_context(struct mirror_set *ms, struct dm_target *ti, dm_put_device(ti, ms->mirror[m].dev); dm_io_client_destroy(ms->io_client); - rh_exit(&ms->rh); + dm_region_hash_destroy(ms->rh); mempool_destroy(ms->read_record_pool); kfree(ms); } @@ -1411,10 +842,10 @@ static int get_mirror(struct mirror_set *ms, struct dm_target *ti, * Create dirty log: log_type #log_params <log_params> */ static struct dm_dirty_log *create_dirty_log(struct dm_target *ti, - unsigned int argc, char **argv, - unsigned int *args_used) + unsigned argc, char **argv, + unsigned *args_used) { - unsigned int param_count; + unsigned param_count; struct dm_dirty_log *dl; if (argc < 2) { @@ -1545,7 +976,7 @@ static int mirror_ctr(struct dm_target *ti, unsigned int argc, char **argv) } ti->private = ms; - ti->split_io = ms->rh.region_size; + ti->split_io = dm_rh_get_region_size(ms->rh); ms->kmirrord_wq = create_singlethread_workqueue("kmirrord"); if (!ms->kmirrord_wq) { @@ -1580,11 +1011,11 @@ static int mirror_ctr(struct dm_target *ti, unsigned int argc, char **argv) goto err_destroy_wq; } - r = dm_kcopyd_client_create(DM_IO_PAGES, &ms->kcopyd_client); + r = dm_kcopyd_client_create(DM_KCOPYD_PAGES, &ms->kcopyd_client); if (r) goto err_destroy_wq; - wake(ms); + wakeup_mirrord(ms); return 0; err_destroy_wq: @@ -1605,22 +1036,6 @@ static void mirror_dtr(struct dm_target *ti) free_context(ms, ti, ms->nr_mirrors); } -static void queue_bio(struct mirror_set *ms, struct bio *bio, int rw) -{ - unsigned long flags; - int should_wake = 0; - struct bio_list *bl; - - bl = (rw == WRITE) ? &ms->writes : &ms->reads; - spin_lock_irqsave(&ms->lock, flags); - should_wake = !(bl->head); - bio_list_add(bl, bio); - spin_unlock_irqrestore(&ms->lock, flags); - - if (should_wake) - wake(ms); -} - /* * Mirror mapping function */ @@ -1631,16 +1046,16 @@ static int mirror_map(struct dm_target *ti, struct bio *bio, struct mirror *m; struct mirror_set *ms = ti->private; struct dm_raid1_read_record *read_record = NULL; + struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); if (rw == WRITE) { /* Save region for mirror_end_io() handler */ - map_context->ll = bio_to_region(&ms->rh, bio); + map_context->ll = dm_rh_bio_to_region(ms->rh, bio); queue_bio(ms, bio, rw); return DM_MAPIO_SUBMITTED; } - r = ms->rh.log->type->in_sync(ms->rh.log, - bio_to_region(&ms->rh, bio), 0); + r = log->type->in_sync(log, dm_rh_bio_to_region(ms->rh, bio), 0); if (r < 0 && r != -EWOULDBLOCK) return r; @@ -1688,7 +1103,7 @@ static int mirror_end_io(struct dm_target *ti, struct bio *bio, * We need to dec pending if this was a write. */ if (rw == WRITE) { - rh_dec(&ms->rh, map_context->ll); + dm_rh_dec(ms->rh, map_context->ll); return error; } @@ -1744,7 +1159,7 @@ out: static void mirror_presuspend(struct dm_target *ti) { struct mirror_set *ms = (struct mirror_set *) ti->private; - struct dm_dirty_log *log = ms->rh.log; + struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); atomic_set(&ms->suspend, 1); @@ -1752,10 +1167,10 @@ static void mirror_presuspend(struct dm_target *ti) * We must finish up all the work that we've * generated (i.e. recovery work). */ - rh_stop_recovery(&ms->rh); + dm_rh_stop_recovery(ms->rh); wait_event(_kmirrord_recovery_stopped, - !atomic_read(&ms->rh.recovery_in_flight)); + !dm_rh_recovery_in_flight(ms->rh)); if (log->type->presuspend && log->type->presuspend(log)) /* FIXME: need better error handling */ @@ -1773,7 +1188,7 @@ static void mirror_presuspend(struct dm_target *ti) static void mirror_postsuspend(struct dm_target *ti) { struct mirror_set *ms = ti->private; - struct dm_dirty_log *log = ms->rh.log; + struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); if (log->type->postsuspend && log->type->postsuspend(log)) /* FIXME: need better error handling */ @@ -1783,13 +1198,13 @@ static void mirror_postsuspend(struct dm_target *ti) static void mirror_resume(struct dm_target *ti) { struct mirror_set *ms = ti->private; - struct dm_dirty_log *log = ms->rh.log; + struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); atomic_set(&ms->suspend, 0); if (log->type->resume && log->type->resume(log)) /* FIXME: need better error handling */ DMWARN("log resume failed"); - rh_start_recovery(&ms->rh); + dm_rh_start_recovery(ms->rh); } /* @@ -1821,7 +1236,7 @@ static int mirror_status(struct dm_target *ti, status_type_t type, { unsigned int m, sz = 0; struct mirror_set *ms = (struct mirror_set *) ti->private; - struct dm_dirty_log *log = ms->rh.log; + struct dm_dirty_log *log = dm_rh_dirty_log(ms->rh); char buffer[ms->nr_mirrors + 1]; switch (type) { @@ -1834,15 +1249,15 @@ static int mirror_status(struct dm_target *ti, status_type_t type, buffer[m] = '\0'; DMEMIT("%llu/%llu 1 %s ", - (unsigned long long)log->type->get_sync_count(ms->rh.log), + (unsigned long long)log->type->get_sync_count(log), (unsigned long long)ms->nr_regions, buffer); - sz += log->type->status(ms->rh.log, type, result+sz, maxlen-sz); + sz += log->type->status(log, type, result+sz, maxlen-sz); break; case STATUSTYPE_TABLE: - sz = log->type->status(ms->rh.log, type, result, maxlen); + sz = log->type->status(log, type, result, maxlen); DMEMIT("%d", ms->nr_mirrors); for (m = 0; m < ms->nr_mirrors; m++) diff --git a/drivers/md/dm-region-hash.c b/drivers/md/dm-region-hash.c new file mode 100644 index 000000000000..59f8d9df9e1a --- /dev/null +++ b/drivers/md/dm-region-hash.c @@ -0,0 +1,704 @@ +/* + * Copyright (C) 2003 Sistina Software Limited. + * Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved. + * + * This file is released under the GPL. + */ + +#include <linux/dm-dirty-log.h> +#include <linux/dm-region-hash.h> + +#include <linux/ctype.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/vmalloc.h> + +#include "dm.h" +#include "dm-bio-list.h" + +#define DM_MSG_PREFIX "region hash" + +/*----------------------------------------------------------------- + * Region hash + * + * The mirror splits itself up into discrete regions. Each + * region can be in one of three states: clean, dirty, + * nosync. There is no need to put clean regions in the hash. + * + * In addition to being present in the hash table a region _may_ + * be present on one of three lists. + * + * clean_regions: Regions on this list have no io pending to + * them, they are in sync, we are no longer interested in them, + * they are dull. dm_rh_update_states() will remove them from the + * hash table. + * + * quiesced_regions: These regions have been spun down, ready + * for recovery. rh_recovery_start() will remove regions from + * this list and hand them to kmirrord, which will schedule the + * recovery io with kcopyd. + * + * recovered_regions: Regions that kcopyd has successfully + * recovered. dm_rh_update_states() will now schedule any delayed + * io, up the recovery_count, and remove the region from the + * hash. + * + * There are 2 locks: + * A rw spin lock 'hash_lock' protects just the hash table, + * this is never held in write mode from interrupt context, + * which I believe means that we only have to disable irqs when + * doing a write lock. + * + * An ordinary spin lock 'region_lock' that protects the three + * lists in the region_hash, with the 'state', 'list' and + * 'delayed_bios' fields of the regions. This is used from irq + * context, so all other uses will have to suspend local irqs. + *---------------------------------------------------------------*/ +struct dm_region_hash { + uint32_t region_size; + unsigned region_shift; + + /* holds persistent region state */ + struct dm_dirty_log *log; + + /* hash table */ + rwlock_t hash_lock; + mempool_t *region_pool; + unsigned mask; + unsigned nr_buckets; + unsigned prime; + unsigned shift; + struct list_head *buckets; + + unsigned max_recovery; /* Max # of regions to recover in parallel */ + + spinlock_t region_lock; + atomic_t recovery_in_flight; + struct semaphore recovery_count; + struct list_head clean_regions; + struct list_head quiesced_regions; + struct list_head recovered_regions; + struct list_head failed_recovered_regions; + + void *context; + sector_t target_begin; + + /* Callback function to schedule bios writes */ + void (*dispatch_bios)(void *context, struct bio_list *bios); + + /* Callback function to wakeup callers worker thread. */ + void (*wakeup_workers)(void *context); + + /* Callback function to wakeup callers recovery waiters. */ + void (*wakeup_all_recovery_waiters)(void *context); +}; + +struct dm_region { + struct dm_region_hash *rh; /* FIXME: can we get rid of this ? */ + region_t key; + int state; + + struct list_head hash_list; + struct list_head list; + + atomic_t pending; + struct bio_list delayed_bios; +}; + +/* + * Conversion fns + */ +static region_t dm_rh_sector_to_region(struct dm_region_hash *rh, sector_t sector) +{ + return sector >> rh->region_shift; +} + +sector_t dm_rh_region_to_sector(struct dm_region_hash *rh, region_t region) +{ + return region << rh->region_shift; +} +EXPORT_SYMBOL_GPL(dm_rh_region_to_sector); + +region_t dm_rh_bio_to_region(struct dm_region_hash *rh, struct bio *bio) +{ + return dm_rh_sector_to_region(rh, bio->bi_sector - rh->target_begin); +} +EXPORT_SYMBOL_GPL(dm_rh_bio_to_region); + +void *dm_rh_region_context(struct dm_region *reg) +{ + return reg->rh->context; +} +EXPORT_SYMBOL_GPL(dm_rh_region_context); + +region_t dm_rh_get_region_key(struct dm_region *reg) +{ + return reg->key; +} +EXPORT_SYMBOL_GPL(dm_rh_get_region_key); + +sector_t dm_rh_get_region_size(struct dm_region_hash *rh) +{ + return rh->region_size; +} +EXPORT_SYMBOL_GPL(dm_rh_get_region_size); + +/* + * FIXME: shall we pass in a structure instead of all these args to + * dm_region_hash_create()???? + */ +#define RH_HASH_MULT 2654435387U +#define RH_HASH_SHIFT 12 + +#define MIN_REGIONS 64 +struct dm_region_hash *dm_region_hash_create( + void *context, void (*dispatch_bios)(void *context, + struct bio_list *bios), + void (*wakeup_workers)(void *context), + void (*wakeup_all_recovery_waiters)(void *context), + sector_t target_begin, unsigned max_recovery, + struct dm_dirty_log *log, uint32_t region_size, + region_t nr_regions) +{ + struct dm_region_hash *rh; + unsigned nr_buckets, max_buckets; + size_t i; + + /* + * Calculate a suitable number of buckets for our hash + * table. + */ + max_buckets = nr_regions >> 6; + for (nr_buckets = 128u; nr_buckets < max_buckets; nr_buckets <<= 1) + ; + nr_buckets >>= 1; + + rh = kmalloc(sizeof(*rh), GFP_KERNEL); + if (!rh) { + DMERR("unable to allocate region hash memory"); + return ERR_PTR(-ENOMEM); + } + + rh->context = context; + rh->dispatch_bios = dispatch_bios; + rh->wakeup_workers = wakeup_workers; + rh->wakeup_all_recovery_waiters = wakeup_all_recovery_waiters; + rh->target_begin = target_begin; + rh->max_recovery = max_recovery; + rh->log = log; + rh->region_size = region_size; + rh->region_shift = ffs(region_size) - 1; + rwlock_init(&rh->hash_lock); + rh->mask = nr_buckets - 1; + rh->nr_buckets = nr_buckets; + + rh->shift = RH_HASH_SHIFT; + rh->prime = RH_HASH_MULT; + + rh->buckets = vmalloc(nr_buckets * sizeof(*rh->buckets)); + if (!rh->buckets) { + DMERR("unable to allocate region hash bucket memory"); + kfree(rh); + return ERR_PTR(-ENOMEM); + } + + for (i = 0; i < nr_buckets; i++) + INIT_LIST_HEAD(rh->buckets + i); + + spin_lock_init(&rh->region_lock); + sema_init(&rh->recovery_count, 0); + atomic_set(&rh->recovery_in_flight, 0); + INIT_LIST_HEAD(&rh->clean_regions); + INIT_LIST_HEAD(&rh->quiesced_regions); + INIT_LIST_HEAD(&rh->recovered_regions); + INIT_LIST_HEAD(&rh->failed_recovered_regions); + + rh->region_pool = mempool_create_kmalloc_pool(MIN_REGIONS, + sizeof(struct dm_region)); + if (!rh->region_pool) { + vfree(rh->buckets); + kfree(rh); + rh = ERR_PTR(-ENOMEM); + } + + return rh; +} +EXPORT_SYMBOL_GPL(dm_region_hash_create); + +void dm_region_hash_destroy(struct dm_region_hash *rh) +{ + unsigned h; + struct dm_region *reg, *nreg; + + BUG_ON(!list_empty(&rh->quiesced_regions)); + for (h = 0; h < rh->nr_buckets; h++) { + list_for_each_entry_safe(reg, nreg, rh->buckets + h, + hash_list) { + BUG_ON(atomic_read(®->pending)); + mempool_free(reg, rh->region_pool); + } + } + + if (rh->log) + dm_dirty_log_destroy(rh->log); + + if (rh->region_pool) + mempool_destroy(rh->region_pool); + + vfree(rh->buckets); + kfree(rh); +} +EXPORT_SYMBOL_GPL(dm_region_hash_destroy); + +struct dm_dirty_log *dm_rh_dirty_log(struct dm_region_hash *rh) +{ + return rh->log; +} +EXPORT_SYMBOL_GPL(dm_rh_dirty_log); + +static unsigned rh_hash(struct dm_region_hash *rh, region_t region) +{ + return (unsigned) ((region * rh->prime) >> rh->shift) & rh->mask; +} + +static struct dm_region *__rh_lookup(struct dm_region_hash *rh, region_t region) +{ + struct dm_region *reg; + struct list_head *bucket = rh->buckets + rh_hash(rh, region); + + list_for_each_entry(reg, bucket, hash_list) + if (reg->key == region) + return reg; + + return NULL; +} + +static void __rh_insert(struct dm_region_hash *rh, struct dm_region *reg) +{ + list_add(®->hash_list, rh->buckets + rh_hash(rh, reg->key)); +} + +static struct dm_region *__rh_alloc(struct dm_region_hash *rh, region_t region) +{ + struct dm_region *reg, *nreg; + + nreg = mempool_alloc(rh->region_pool, GFP_ATOMIC); + if (unlikely(!nreg)) + nreg = kmalloc(sizeof(*nreg), GFP_NOIO); + + nreg->state = rh->log->type->in_sync(rh->log, region, 1) ? + DM_RH_CLEAN : DM_RH_NOSYNC; + nreg->rh = rh; + nreg->key = region; + INIT_LIST_HEAD(&nreg->list); + atomic_set(&nreg->pending, 0); + bio_list_init(&nreg->delayed_bios); + + write_lock_irq(&rh->hash_lock); + reg = __rh_lookup(rh, region); + if (reg) + /* We lost the race. */ + mempool_free(nreg, rh->region_pool); + else { + __rh_insert(rh, nreg); + if (nreg->state == DM_RH_CLEAN) { + spin_lock(&rh->region_lock); + list_add(&nreg->list, &rh->clean_regions); + spin_unlock(&rh->region_lock); + } + + reg = nreg; + } + write_unlock_irq(&rh->hash_lock); + + return reg; +} + +static struct dm_region *__rh_find(struct dm_region_hash *rh, region_t region) +{ + struct dm_region *reg; + + reg = __rh_lookup(rh, region); + if (!reg) { + read_unlock(&rh->hash_lock); + reg = __rh_alloc(rh, region); + read_lock(&rh->hash_lock); + } + + return reg; +} + +int dm_rh_get_state(struct dm_region_hash *rh, region_t region, int may_block) +{ + int r; + struct dm_region *reg; + + read_lock(&rh->hash_lock); + reg = __rh_lookup(rh, region); + read_unlock(&rh->hash_lock); + + if (reg) + return reg->state; + + /* + * The region wasn't in the hash, so we fall back to the + * dirty log. + */ + r = rh->log->type->in_sync(rh->log, region, may_block); + + /* + * Any error from the dirty log (eg. -EWOULDBLOCK) gets + * taken as a DM_RH_NOSYNC + */ + return r == 1 ? DM_RH_CLEAN : DM_RH_NOSYNC; +} +EXPORT_SYMBOL_GPL(dm_rh_get_state); + +static void complete_resync_work(struct dm_region *reg, int success) +{ + struct dm_region_hash *rh = reg->rh; + + rh->log->type->set_region_sync(rh->log, reg->key, success); + + /* + * Dispatch the bios before we call 'wake_up_all'. + * This is important because if we are suspending, + * we want to know that recovery is complete and + * the work queue is flushed. If we wake_up_all + * before we dispatch_bios (queue bios and call wake()), + * then we risk suspending before the work queue + * has been properly flushed. + */ + rh->dispatch_bios(rh->context, ®->delayed_bios); + if (atomic_dec_and_test(&rh->recovery_in_flight)) + rh->wakeup_all_recovery_waiters(rh->context); + up(&rh->recovery_count); +} + +/* dm_rh_mark_nosync + * @ms + * @bio + * @done + * @error + * + * The bio was written on some mirror(s) but failed on other mirror(s). + * We can successfully endio the bio but should avoid the region being + * marked clean by setting the state DM_RH_NOSYNC. + * + * This function is _not_ safe in interrupt context! + */ +void dm_rh_mark_nosync(struct dm_region_hash *rh, + struct bio *bio, unsigned done, int error) +{ + unsigned long flags; + struct dm_dirty_log *log = rh->log; + struct dm_region *reg; + region_t region = dm_rh_bio_to_region(rh, bio); + int recovering = 0; + + /* We must inform the log that the sync count has changed. */ + log->type->set_region_sync(log, region, 0); + + read_lock(&rh->hash_lock); + reg = __rh_find(rh, region); + read_unlock(&rh->hash_lock); + + /* region hash entry should exist because write was in-flight */ + BUG_ON(!reg); + BUG_ON(!list_empty(®->list)); + + spin_lock_irqsave(&rh->region_lock, flags); + /* + * Possible cases: + * 1) DM_RH_DIRTY + * 2) DM_RH_NOSYNC: was dirty, other preceeding writes failed + * 3) DM_RH_RECOVERING: flushing pending writes + * Either case, the region should have not been connected to list. + */ + recovering = (reg->state == DM_RH_RECOVERING); + reg->state = DM_RH_NOSYNC; + BUG_ON(!list_empty(®->list)); + spin_unlock_irqrestore(&rh->region_lock, flags); + + bio_endio(bio, error); + if (recovering) + complete_resync_work(reg, 0); +} +EXPORT_SYMBOL_GPL(dm_rh_mark_nosync); + +void dm_rh_update_states(struct dm_region_hash *rh, int errors_handled) +{ + struct dm_region *reg, *next; + + LIST_HEAD(clean); + LIST_HEAD(recovered); + LIST_HEAD(failed_recovered); + + /* + * Quickly grab the lists. + */ + write_lock_irq(&rh->hash_lock); + spin_lock(&rh->region_lock); + if (!list_empty(&rh->clean_regions)) { + list_splice_init(&rh->clean_regions, &clean); + + list_for_each_entry(reg, &clean, list) + list_del(®->hash_list); + } + + if (!list_empty(&rh->recovered_regions)) { + list_splice_init(&rh->recovered_regions, &recovered); + + list_for_each_entry(reg, &recovered, list) + list_del(®->hash_list); + } + + if (!list_empty(&rh->failed_recovered_regions)) { + list_splice_init(&rh->failed_recovered_regions, + &failed_recovered); + + list_for_each_entry(reg, &failed_recovered, list) + list_del(®->hash_list); + } + + spin_unlock(&rh->region_lock); + write_unlock_irq(&rh->hash_lock); + + /* + * All the regions on the recovered and clean lists have + * now been pulled out of the system, so no need to do + * any more locking. + */ + list_for_each_entry_safe(reg, next, &recovered, list) { + rh->log->type->clear_region(rh->log, reg->key); + complete_resync_work(reg, 1); + mempool_free(reg, rh->region_pool); + } + + list_for_each_entry_safe(reg, next, &failed_recovered, list) { + complete_resync_work(reg, errors_handled ? 0 : 1); + mempool_free(reg, rh->region_pool); + } + + list_for_each_entry_safe(reg, next, &clean, list) { + rh->log->type->clear_region(rh->log, reg->key); + mempool_free(reg, rh->region_pool); + } + + rh->log->type->flush(rh->log); +} +EXPORT_SYMBOL_GPL(dm_rh_update_states); + +static void rh_inc(struct dm_region_hash *rh, region_t region) +{ + struct dm_region *reg; + + read_lock(&rh->hash_lock); + reg = __rh_find(rh, region); + + spin_lock_irq(&rh->region_lock); + atomic_inc(®->pending); + + if (reg->state == DM_RH_CLEAN) { + reg->state = DM_RH_DIRTY; + list_del_init(®->list); /* take off the clean list */ + spin_unlock_irq(&rh->region_lock); + + rh->log->type->mark_region(rh->log, reg->key); + } else + spin_unlock_irq(&rh->region_lock); + + + read_unlock(&rh->hash_lock); +} + +void dm_rh_inc_pending(struct dm_region_hash *rh, struct bio_list *bios) +{ + struct bio *bio; + + for (bio = bios->head; bio; bio = bio->bi_next) + rh_inc(rh, dm_rh_bio_to_region(rh, bio)); +} +EXPORT_SYMBOL_GPL(dm_rh_inc_pending); + +void dm_rh_dec(struct dm_region_hash *rh, region_t region) +{ + unsigned long flags; + struct dm_region *reg; + int should_wake = 0; + + read_lock(&rh->hash_lock); + reg = __rh_lookup(rh, region); + read_unlock(&rh->hash_lock); + + spin_lock_irqsave(&rh->region_lock, flags); + if (atomic_dec_and_test(®->pending)) { + /* + * There is no pending I/O for this region. + * We can move the region to corresponding list for next action. + * At this point, the region is not yet connected to any list. + * + * If the state is DM_RH_NOSYNC, the region should be kept off + * from clean list. + * The hash entry for DM_RH_NOSYNC will remain in memory + * until the region is recovered or the map is reloaded. + */ + + /* do nothing for DM_RH_NOSYNC */ + if (reg->state == DM_RH_RECOVERING) { + list_add_tail(®->list, &rh->quiesced_regions); + } else if (reg->state == DM_RH_DIRTY) { + reg->state = DM_RH_CLEAN; + list_add(®->list, &rh->clean_regions); + } + should_wake = 1; + } + spin_unlock_irqrestore(&rh->region_lock, flags); + + if (should_wake) + rh->wakeup_workers(rh->context); +} +EXPORT_SYMBOL_GPL(dm_rh_dec); + +/* + * Starts quiescing a region in preparation for recovery. + */ +static int __rh_recovery_prepare(struct dm_region_hash *rh) +{ + int r; + region_t region; + struct dm_region *reg; + + /* + * Ask the dirty log what's next. + */ + r = rh->log->type->get_resync_work(rh->log, ®ion); + if (r <= 0) + return r; + + /* + * Get this region, and start it quiescing by setting the + * recovering flag. + */ + read_lock(&rh->hash_lock); + reg = __rh_find(rh, region); + read_unlock(&rh->hash_lock); + + spin_lock_irq(&rh->region_lock); + reg->state = DM_RH_RECOVERING; + + /* Already quiesced ? */ + if (atomic_read(®->pending)) + list_del_init(®->list); + else + list_move(®->list, &rh->quiesced_regions); + + spin_unlock_irq(&rh->region_lock); + + return 1; +} + +void dm_rh_recovery_prepare(struct dm_region_hash *rh) +{ + /* Extra reference to avoid race with dm_rh_stop_recovery */ + atomic_inc(&rh->recovery_in_flight); + + while (!down_trylock(&rh->recovery_count)) { + atomic_inc(&rh->recovery_in_flight); + if (__rh_recovery_prepare(rh) <= 0) { + atomic_dec(&rh->recovery_in_flight); + up(&rh->recovery_count); + break; + } + } + + /* Drop the extra reference */ + if (atomic_dec_and_test(&rh->recovery_in_flight)) + rh->wakeup_all_recovery_waiters(rh->context); +} +EXPORT_SYMBOL_GPL(dm_rh_recovery_prepare); + +/* + * Returns any quiesced regions. + */ +struct dm_region *dm_rh_recovery_start(struct dm_region_hash *rh) +{ + struct dm_region *reg = NULL; + + spin_lock_irq(&rh->region_lock); + if (!list_empty(&rh->quiesced_regions)) { + reg = list_entry(rh->quiesced_regions.next, + struct dm_region, list); + list_del_init(®->list); /* remove from the quiesced list */ + } + spin_unlock_irq(&rh->region_lock); + + return reg; +} +EXPORT_SYMBOL_GPL(dm_rh_recovery_start); + +void dm_rh_recovery_end(struct dm_region *reg, int success) +{ + struct dm_region_hash *rh = reg->rh; + + spin_lock_irq(&rh->region_lock); + if (success) + list_add(®->list, ®->rh->recovered_regions); + else { + reg->state = DM_RH_NOSYNC; + list_add(®->list, ®->rh->failed_recovered_regions); + } + spin_unlock_irq(&rh->region_lock); + + rh->wakeup_workers(rh->context); +} +EXPORT_SYMBOL_GPL(dm_rh_recovery_end); + +/* Return recovery in flight count. */ +int dm_rh_recovery_in_flight(struct dm_region_hash *rh) +{ + return atomic_read(&rh->recovery_in_flight); +} +EXPORT_SYMBOL_GPL(dm_rh_recovery_in_flight); + +int dm_rh_flush(struct dm_region_hash *rh) +{ + return rh->log->type->flush(rh->log); +} +EXPORT_SYMBOL_GPL(dm_rh_flush); + +void dm_rh_delay(struct dm_region_hash *rh, struct bio *bio) +{ + struct dm_region *reg; + + read_lock(&rh->hash_lock); + reg = __rh_find(rh, dm_rh_bio_to_region(rh, bio)); + bio_list_add(®->delayed_bios, bio); + read_unlock(&rh->hash_lock); +} +EXPORT_SYMBOL_GPL(dm_rh_delay); + +void dm_rh_stop_recovery(struct dm_region_hash *rh) +{ + int i; + + /* wait for any recovering regions */ + for (i = 0; i < rh->max_recovery; i++) + down(&rh->recovery_count); +} +EXPORT_SYMBOL_GPL(dm_rh_stop_recovery); + +void dm_rh_start_recovery(struct dm_region_hash *rh) +{ + int i; + + for (i = 0; i < rh->max_recovery; i++) + up(&rh->recovery_count); + + rh->wakeup_workers(rh->context); +} +EXPORT_SYMBOL_GPL(dm_rh_start_recovery); + +MODULE_DESCRIPTION(DM_NAME " region hash"); +MODULE_AUTHOR("Joe Thornber/Heinz Mauelshagen <dm-devel@redhat.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/md/dm-round-robin.c b/drivers/md/dm-round-robin.c index 391dfa2ad434..cdfbf65b28cb 100644 --- a/drivers/md/dm-round-robin.c +++ b/drivers/md/dm-round-robin.c @@ -9,7 +9,8 @@ * Round-robin path selector. */ -#include "dm.h" +#include <linux/device-mapper.h> + #include "dm-path-selector.h" #include <linux/slab.h> diff --git a/drivers/md/dm-snap.c b/drivers/md/dm-snap.c index 6e5528aecc98..b2d9d1ac28ad 100644 --- a/drivers/md/dm-snap.c +++ b/drivers/md/dm-snap.c @@ -600,7 +600,6 @@ static int snapshot_ctr(struct dm_target *ti, unsigned int argc, char **argv) s->valid = 1; s->active = 0; - s->last_percent = 0; init_rwsem(&s->lock); spin_lock_init(&s->pe_lock); s->ti = ti; @@ -824,8 +823,10 @@ static struct bio *put_pending_exception(struct dm_snap_pending_exception *pe) * the bios for the original write to the origin. */ if (primary_pe && - atomic_dec_and_test(&primary_pe->ref_count)) + atomic_dec_and_test(&primary_pe->ref_count)) { origin_bios = bio_list_get(&primary_pe->origin_bios); + free_pending_exception(primary_pe); + } /* * Free the pe if it's not linked to an origin write or if @@ -834,12 +835,6 @@ static struct bio *put_pending_exception(struct dm_snap_pending_exception *pe) if (!primary_pe || primary_pe != pe) free_pending_exception(pe); - /* - * Free the primary pe if nothing references it. - */ - if (primary_pe && !atomic_read(&primary_pe->ref_count)) - free_pending_exception(primary_pe); - return origin_bios; } diff --git a/drivers/md/dm-snap.h b/drivers/md/dm-snap.h index 292c15609ae3..f07315fe2362 100644 --- a/drivers/md/dm-snap.h +++ b/drivers/md/dm-snap.h @@ -9,7 +9,7 @@ #ifndef DM_SNAPSHOT_H #define DM_SNAPSHOT_H -#include "dm.h" +#include <linux/device-mapper.h> #include "dm-bio-list.h" #include <linux/blkdev.h> #include <linux/workqueue.h> @@ -158,9 +158,6 @@ struct dm_snapshot { /* Used for display of table */ char type; - /* The last percentage we notified */ - int last_percent; - mempool_t *pending_pool; struct exception_table pending; diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c index b745d8ac625b..a2d068dbe9e2 100644 --- a/drivers/md/dm-stripe.c +++ b/drivers/md/dm-stripe.c @@ -4,7 +4,7 @@ * This file is released under the GPL. */ -#include "dm.h" +#include <linux/device-mapper.h> #include <linux/module.h> #include <linux/init.h> @@ -60,8 +60,8 @@ static inline struct stripe_c *alloc_context(unsigned int stripes) { size_t len; - if (array_too_big(sizeof(struct stripe_c), sizeof(struct stripe), - stripes)) + if (dm_array_too_big(sizeof(struct stripe_c), sizeof(struct stripe), + stripes)) return NULL; len = sizeof(struct stripe_c) + (sizeof(struct stripe) * stripes); diff --git a/drivers/md/dm-zero.c b/drivers/md/dm-zero.c index bdec206c404b..cdbf126ec106 100644 --- a/drivers/md/dm-zero.c +++ b/drivers/md/dm-zero.c @@ -4,7 +4,7 @@ * This file is released under the GPL. */ -#include "dm.h" +#include <linux/device-mapper.h> #include <linux/module.h> #include <linux/init.h> diff --git a/drivers/md/dm.c b/drivers/md/dm.c index 327de03a5bdf..d1d0cd0f5750 100644 --- a/drivers/md/dm.c +++ b/drivers/md/dm.c @@ -76,7 +76,6 @@ union map_info *dm_get_mapinfo(struct bio *bio) */ struct dm_wq_req { enum { - DM_WQ_FLUSH_ALL, DM_WQ_FLUSH_DEFERRED, } type; struct work_struct work; @@ -151,40 +150,40 @@ static struct kmem_cache *_tio_cache; static int __init local_init(void) { - int r; + int r = -ENOMEM; /* allocate a slab for the dm_ios */ _io_cache = KMEM_CACHE(dm_io, 0); if (!_io_cache) - return -ENOMEM; + return r; /* allocate a slab for the target ios */ _tio_cache = KMEM_CACHE(dm_target_io, 0); - if (!_tio_cache) { - kmem_cache_destroy(_io_cache); - return -ENOMEM; - } + if (!_tio_cache) + goto out_free_io_cache; r = dm_uevent_init(); - if (r) { - kmem_cache_destroy(_tio_cache); - kmem_cache_destroy(_io_cache); - return r; - } + if (r) + goto out_free_tio_cache; _major = major; r = register_blkdev(_major, _name); - if (r < 0) { - kmem_cache_destroy(_tio_cache); - kmem_cache_destroy(_io_cache); - dm_uevent_exit(); - return r; - } + if (r < 0) + goto out_uevent_exit; if (!_major) _major = r; return 0; + +out_uevent_exit: + dm_uevent_exit(); +out_free_tio_cache: + kmem_cache_destroy(_tio_cache); +out_free_io_cache: + kmem_cache_destroy(_io_cache); + + return r; } static void local_exit(void) @@ -669,6 +668,7 @@ static struct bio *split_bvec(struct bio *bio, sector_t sector, clone->bi_size = to_bytes(len); clone->bi_io_vec->bv_offset = offset; clone->bi_io_vec->bv_len = clone->bi_size; + clone->bi_flags |= 1 << BIO_CLONED; return clone; } @@ -1394,9 +1394,6 @@ static void dm_wq_work(struct work_struct *work) down_write(&md->io_lock); switch (req->type) { - case DM_WQ_FLUSH_ALL: - __merge_pushback_list(md); - /* pass through */ case DM_WQ_FLUSH_DEFERRED: __flush_deferred_io(md); break; @@ -1526,7 +1523,7 @@ int dm_suspend(struct mapped_device *md, unsigned suspend_flags) if (!md->suspended_bdev) { DMWARN("bdget failed in dm_suspend"); r = -ENOMEM; - goto flush_and_out; + goto out; } /* @@ -1577,14 +1574,6 @@ int dm_suspend(struct mapped_device *md, unsigned suspend_flags) set_bit(DMF_SUSPENDED, &md->flags); -flush_and_out: - if (r && noflush) - /* - * Because there may be already I/Os in the pushback list, - * flush them before return. - */ - dm_queue_flush(md, DM_WQ_FLUSH_ALL, NULL); - out: if (r && md->suspended_bdev) { bdput(md->suspended_bdev); diff --git a/drivers/md/dm.h b/drivers/md/dm.h index cd189da2b2fa..0ade60cdef42 100644 --- a/drivers/md/dm.h +++ b/drivers/md/dm.h @@ -62,15 +62,6 @@ void dm_put_target_type(struct target_type *t); int dm_target_iterate(void (*iter_func)(struct target_type *tt, void *param), void *param); -/*----------------------------------------------------------------- - * Useful inlines. - *---------------------------------------------------------------*/ -static inline int array_too_big(unsigned long fixed, unsigned long obj, - unsigned long num) -{ - return (num > (ULONG_MAX - fixed) / obj); -} - int dm_split_args(int *argc, char ***argvp, char *input); /* diff --git a/drivers/media/common/saa7146_fops.c b/drivers/media/common/saa7146_fops.c index 5b34c134aa25..127b0526a727 100644 --- a/drivers/media/common/saa7146_fops.c +++ b/drivers/media/common/saa7146_fops.c @@ -545,11 +545,11 @@ int saa7146_register_device(struct video_device **vid, struct saa7146_dev* dev, if( VFL_TYPE_GRABBER == type ) { vv->video_minor = vfd->minor; INFO(("%s: registered device video%d [v4l2]\n", - dev->name, vfd->minor & 0x1f)); + dev->name, vfd->num)); } else { vv->vbi_minor = vfd->minor; INFO(("%s: registered device vbi%d [v4l2]\n", - dev->name, vfd->minor & 0x1f)); + dev->name, vfd->num)); } *vid = vfd; diff --git a/drivers/media/common/saa7146_video.c b/drivers/media/common/saa7146_video.c index 99be9e5c85f7..fe0bd55977e3 100644 --- a/drivers/media/common/saa7146_video.c +++ b/drivers/media/common/saa7146_video.c @@ -834,7 +834,7 @@ static int video_end(struct saa7146_fh *fh, struct file *file) * copying is done already, arg is a kernel pointer. */ -int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *arg) +static int __saa7146_video_do_ioctl(struct file *file, unsigned int cmd, void *arg) { struct saa7146_fh *fh = file->private_data; struct saa7146_dev *dev = fh->dev; @@ -1215,12 +1215,18 @@ int saa7146_video_do_ioctl(struct inode *inode, struct file *file, unsigned int } #endif default: - return v4l_compat_translate_ioctl(inode,file,cmd,arg, - saa7146_video_do_ioctl); + return v4l_compat_translate_ioctl(file, cmd, arg, + __saa7146_video_do_ioctl); } return 0; } +int saa7146_video_do_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + return __saa7146_video_do_ioctl(file, cmd, arg); +} + /*********************************************************************************/ /* buffer handling functions */ diff --git a/drivers/media/dvb/frontends/s5h1411.c b/drivers/media/dvb/frontends/s5h1411.c index 2febfb5a846b..40644aacffcb 100644 --- a/drivers/media/dvb/frontends/s5h1411.c +++ b/drivers/media/dvb/frontends/s5h1411.c @@ -38,6 +38,7 @@ struct s5h1411_state { struct dvb_frontend frontend; fe_modulation_t current_modulation; + unsigned int first_tune:1; u32 current_frequency; int if_freq; @@ -62,7 +63,7 @@ static struct init_tab { { S5H1411_I2C_TOP_ADDR, 0x08, 0x0047, }, { S5H1411_I2C_TOP_ADDR, 0x1c, 0x0400, }, { S5H1411_I2C_TOP_ADDR, 0x1e, 0x0370, }, - { S5H1411_I2C_TOP_ADDR, 0x1f, 0x342a, }, + { S5H1411_I2C_TOP_ADDR, 0x1f, 0x342c, }, { S5H1411_I2C_TOP_ADDR, 0x24, 0x0231, }, { S5H1411_I2C_TOP_ADDR, 0x25, 0x1011, }, { S5H1411_I2C_TOP_ADDR, 0x26, 0x0f07, }, @@ -100,7 +101,6 @@ static struct init_tab { { S5H1411_I2C_TOP_ADDR, 0x78, 0x3141, }, { S5H1411_I2C_TOP_ADDR, 0x7a, 0x3141, }, { S5H1411_I2C_TOP_ADDR, 0xb3, 0x8003, }, - { S5H1411_I2C_TOP_ADDR, 0xb5, 0xafbb, }, { S5H1411_I2C_TOP_ADDR, 0xb5, 0xa6bb, }, { S5H1411_I2C_TOP_ADDR, 0xb6, 0x0609, }, { S5H1411_I2C_TOP_ADDR, 0xb7, 0x2f06, }, @@ -393,7 +393,7 @@ static int s5h1411_set_if_freq(struct dvb_frontend *fe, int KHz) switch (KHz) { case 3250: - s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x38, 0x10d9); + s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x38, 0x10d5); s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x39, 0x5342); s5h1411_writereg(state, S5H1411_I2C_QAM_ADDR, 0x2c, 0x10d9); break; @@ -464,13 +464,25 @@ static int s5h1411_set_spectralinversion(struct dvb_frontend *fe, int inversion) if (inversion == 1) val |= 0x1000; /* Inverted */ - else - val |= 0x0000; state->inversion = inversion; return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0x24, val); } +static int s5h1411_set_serialmode(struct dvb_frontend *fe, int serial) +{ + struct s5h1411_state *state = fe->demodulator_priv; + u16 val; + + dprintk("%s(%d)\n", __func__, serial); + val = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xbd) & ~0x100; + + if (serial == 1) + val |= 0x100; + + return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xbd, val); +} + static int s5h1411_enable_modulation(struct dvb_frontend *fe, fe_modulation_t m) { @@ -478,6 +490,12 @@ static int s5h1411_enable_modulation(struct dvb_frontend *fe, dprintk("%s(0x%08x)\n", __func__, m); + if ((state->first_tune == 0) && (m == state->current_modulation)) { + dprintk("%s() Already at desired modulation. Skipping...\n", + __func__); + return 0; + } + switch (m) { case VSB_8: dprintk("%s() VSB_8\n", __func__); @@ -502,6 +520,7 @@ static int s5h1411_enable_modulation(struct dvb_frontend *fe, } state->current_modulation = m; + state->first_tune = 0; s5h1411_softreset(fe); return 0; @@ -535,7 +554,7 @@ static int s5h1411_set_gpio(struct dvb_frontend *fe, int enable) return s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xe0, val); } -static int s5h1411_sleep(struct dvb_frontend *fe, int enable) +static int s5h1411_set_powerstate(struct dvb_frontend *fe, int enable) { struct s5h1411_state *state = fe->demodulator_priv; @@ -551,6 +570,11 @@ static int s5h1411_sleep(struct dvb_frontend *fe, int enable) return 0; } +static int s5h1411_sleep(struct dvb_frontend *fe) +{ + return s5h1411_set_powerstate(fe, 1); +} + static int s5h1411_register_reset(struct dvb_frontend *fe) { struct s5h1411_state *state = fe->demodulator_priv; @@ -574,9 +598,6 @@ static int s5h1411_set_frontend(struct dvb_frontend *fe, s5h1411_enable_modulation(fe, p->u.vsb.modulation); - /* Allow the demod to settle */ - msleep(100); - if (fe->ops.tuner_ops.set_params) { if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); @@ -587,6 +608,10 @@ static int s5h1411_set_frontend(struct dvb_frontend *fe, fe->ops.i2c_gate_ctrl(fe, 0); } + /* Issue a reset to the demod so it knows to resync against the + newly tuned frequency */ + s5h1411_softreset(fe); + return 0; } @@ -599,7 +624,7 @@ static int s5h1411_init(struct dvb_frontend *fe) dprintk("%s()\n", __func__); - s5h1411_sleep(fe, 0); + s5h1411_set_powerstate(fe, 0); s5h1411_register_reset(fe); for (i = 0; i < ARRAY_SIZE(init_tab); i++) @@ -610,12 +635,17 @@ static int s5h1411_init(struct dvb_frontend *fe) /* The datasheet says that after initialisation, VSB is default */ state->current_modulation = VSB_8; + /* Although the datasheet says it's in VSB, empirical evidence + shows problems getting lock on the first tuning request. Make + sure we call enable_modulation the first time around */ + state->first_tune = 1; + if (state->config->output_mode == S5H1411_SERIAL_OUTPUT) /* Serial */ - s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xbd, 0x1101); + s5h1411_set_serialmode(fe, 1); else /* Parallel */ - s5h1411_writereg(state, S5H1411_I2C_TOP_ADDR, 0xbd, 0x1001); + s5h1411_set_serialmode(fe, 0); s5h1411_set_spectralinversion(fe, state->config->inversion); s5h1411_set_if_freq(fe, state->config->vsb_if); @@ -637,28 +667,29 @@ static int s5h1411_read_status(struct dvb_frontend *fe, fe_status_t *status) *status = 0; - /* Get the demodulator status */ - reg = (s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xf2) >> 15) - & 0x0001; - if (reg) - *status |= FE_HAS_LOCK | FE_HAS_CARRIER | FE_HAS_SIGNAL; + /* Register F2 bit 15 = Master Lock, removed */ switch (state->current_modulation) { case QAM_64: case QAM_256: reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xf0); - if (reg & 0x100) - *status |= FE_HAS_VITERBI; - if (reg & 0x10) - *status |= FE_HAS_SYNC; + if (reg & 0x10) /* QAM FEC Lock */ + *status |= FE_HAS_SYNC | FE_HAS_LOCK; + if (reg & 0x100) /* QAM EQ Lock */ + *status |= FE_HAS_VITERBI | FE_HAS_CARRIER | FE_HAS_SIGNAL; + break; case VSB_8: - reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0x5e); - if (reg & 0x0001) - *status |= FE_HAS_SYNC; reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0xf2); - if (reg & 0x1000) - *status |= FE_HAS_VITERBI; + if (reg & 0x1000) /* FEC Lock */ + *status |= FE_HAS_SYNC | FE_HAS_LOCK; + if (reg & 0x2000) /* EQ Lock */ + *status |= FE_HAS_VITERBI | FE_HAS_CARRIER | FE_HAS_SIGNAL; + + reg = s5h1411_readreg(state, S5H1411_I2C_TOP_ADDR, 0x53); + if (reg & 0x1) /* AFC Lock */ + *status |= FE_HAS_SIGNAL; + break; default: return -EINVAL; @@ -863,6 +894,7 @@ static struct dvb_frontend_ops s5h1411_ops = { }, .init = s5h1411_init, + .sleep = s5h1411_sleep, .i2c_gate_ctrl = s5h1411_i2c_gate_ctrl, .set_frontend = s5h1411_set_frontend, .get_frontend = s5h1411_get_frontend, diff --git a/drivers/media/dvb/frontends/s5h1411.h b/drivers/media/dvb/frontends/s5h1411.h index 7d542bc00c48..45ec0f82989c 100644 --- a/drivers/media/dvb/frontends/s5h1411.h +++ b/drivers/media/dvb/frontends/s5h1411.h @@ -47,7 +47,7 @@ struct s5h1411_config { u16 mpeg_timing; /* IF Freq for QAM and VSB in KHz */ -#define S5H1411_IF_2500 2500 +#define S5H1411_IF_3250 3250 #define S5H1411_IF_3500 3500 #define S5H1411_IF_4000 4000 #define S5H1411_IF_5380 5380 diff --git a/drivers/media/radio/dsbr100.c b/drivers/media/radio/dsbr100.c index 78f56944e640..a5ca176a7b08 100644 --- a/drivers/media/radio/dsbr100.c +++ b/drivers/media/radio/dsbr100.c @@ -171,11 +171,11 @@ static int dsbr100_start(struct dsbr100_device *radio) if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), USB_REQ_GET_STATUS, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x00, 0xC7, radio->transfer_buffer, 8, 300)<0 || + 0x00, 0xC7, radio->transfer_buffer, 8, 300) < 0 || usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), DSB100_ONOFF, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x01, 0x00, radio->transfer_buffer, 8, 300)<0) + 0x01, 0x00, radio->transfer_buffer, 8, 300) < 0) return -1; radio->muted=0; return (radio->transfer_buffer)[0]; @@ -188,11 +188,11 @@ static int dsbr100_stop(struct dsbr100_device *radio) if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), USB_REQ_GET_STATUS, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x16, 0x1C, radio->transfer_buffer, 8, 300)<0 || + 0x16, 0x1C, radio->transfer_buffer, 8, 300) < 0 || usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), DSB100_ONOFF, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x00, 0x00, radio->transfer_buffer, 8, 300)<0) + 0x00, 0x00, radio->transfer_buffer, 8, 300) < 0) return -1; radio->muted=1; return (radio->transfer_buffer)[0]; @@ -201,24 +201,24 @@ static int dsbr100_stop(struct dsbr100_device *radio) /* set a frequency, freq is defined by v4l's TUNER_LOW, i.e. 1/16th kHz */ static int dsbr100_setfreq(struct dsbr100_device *radio, int freq) { - freq = (freq/16*80)/1000+856; + freq = (freq / 16 * 80) / 1000 + 856; if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), DSB100_TUNE, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - (freq>>8)&0x00ff, freq&0xff, - radio->transfer_buffer, 8, 300)<0 || + (freq >> 8) & 0x00ff, freq & 0xff, + radio->transfer_buffer, 8, 300) < 0 || usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), USB_REQ_GET_STATUS, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x96, 0xB7, radio->transfer_buffer, 8, 300)<0 || + 0x96, 0xB7, radio->transfer_buffer, 8, 300) < 0 || usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), USB_REQ_GET_STATUS, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x00, 0x24, radio->transfer_buffer, 8, 300)<0) { + 0x00, 0x24, radio->transfer_buffer, 8, 300) < 0) { radio->stereo = -1; return -1; } - radio->stereo = ! ((radio->transfer_buffer)[0]&0x01); + radio->stereo = !((radio->transfer_buffer)[0] & 0x01); return (radio->transfer_buffer)[0]; } @@ -229,10 +229,10 @@ static void dsbr100_getstat(struct dsbr100_device *radio) if (usb_control_msg(radio->usbdev, usb_rcvctrlpipe(radio->usbdev, 0), USB_REQ_GET_STATUS, USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN, - 0x00 , 0x24, radio->transfer_buffer, 8, 300)<0) + 0x00 , 0x24, radio->transfer_buffer, 8, 300) < 0) radio->stereo = -1; else - radio->stereo = ! (radio->transfer_buffer[0]&0x01); + radio->stereo = !(radio->transfer_buffer[0] & 0x01); } @@ -265,7 +265,7 @@ static int vidioc_querycap(struct file *file, void *priv, { strlcpy(v->driver, "dsbr100", sizeof(v->driver)); strlcpy(v->card, "D-Link R-100 USB FM Radio", sizeof(v->card)); - sprintf(v->bus_info, "ISA"); + sprintf(v->bus_info, "USB"); v->version = RADIO_VERSION; v->capabilities = V4L2_CAP_TUNER; return 0; @@ -282,9 +282,9 @@ static int vidioc_g_tuner(struct file *file, void *priv, dsbr100_getstat(radio); strcpy(v->name, "FM"); v->type = V4L2_TUNER_RADIO; - v->rangelow = FREQ_MIN*FREQ_MUL; - v->rangehigh = FREQ_MAX*FREQ_MUL; - v->rxsubchans = V4L2_TUNER_SUB_MONO|V4L2_TUNER_SUB_STEREO; + v->rangelow = FREQ_MIN * FREQ_MUL; + v->rangehigh = FREQ_MAX * FREQ_MUL; + v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO; v->capability = V4L2_TUNER_CAP_LOW; if(radio->stereo) v->audmode = V4L2_TUNER_MODE_STEREO; @@ -309,7 +309,7 @@ static int vidioc_s_frequency(struct file *file, void *priv, struct dsbr100_device *radio = video_drvdata(file); radio->curfreq = f->frequency; - if (dsbr100_setfreq(radio, radio->curfreq)==-1) + if (dsbr100_setfreq(radio, radio->curfreq) == -1) dev_warn(&radio->usbdev->dev, "Set frequency failed\n"); return 0; } @@ -331,8 +331,7 @@ static int vidioc_queryctrl(struct file *file, void *priv, for (i = 0; i < ARRAY_SIZE(radio_qctrl); i++) { if (qc->id && qc->id == radio_qctrl[i].id) { - memcpy(qc, &(radio_qctrl[i]), - sizeof(*qc)); + memcpy(qc, &(radio_qctrl[i]), sizeof(*qc)); return 0; } } @@ -412,19 +411,25 @@ static int vidioc_s_audio(struct file *file, void *priv, static int usb_dsbr100_open(struct inode *inode, struct file *file) { struct dsbr100_device *radio = video_drvdata(file); + int retval; lock_kernel(); radio->users = 1; radio->muted = 1; - if (dsbr100_start(radio)<0) { + if (dsbr100_start(radio) < 0) { dev_warn(&radio->usbdev->dev, "Radio did not start up properly\n"); radio->users = 0; unlock_kernel(); return -EIO; } - dsbr100_setfreq(radio, radio->curfreq); + + retval = dsbr100_setfreq(radio, radio->curfreq); + + if (retval == -1) + printk(KERN_WARNING KBUILD_MODNAME ": Set frequency failed\n"); + unlock_kernel(); return 0; } @@ -485,13 +490,20 @@ static int usb_dsbr100_probe(struct usb_interface *intf, { struct dsbr100_device *radio; - if (!(radio = kmalloc(sizeof(struct dsbr100_device), GFP_KERNEL))) + radio = kmalloc(sizeof(struct dsbr100_device), GFP_KERNEL); + + if (!radio) return -ENOMEM; - if (!(radio->transfer_buffer = kmalloc(TB_LEN, GFP_KERNEL))) { + + radio->transfer_buffer = kmalloc(TB_LEN, GFP_KERNEL); + + if (!(radio->transfer_buffer)) { kfree(radio); return -ENOMEM; } - if (!(radio->videodev = video_device_alloc())) { + radio->videodev = video_device_alloc(); + + if (!(radio->videodev)) { kfree(radio->transfer_buffer); kfree(radio); return -ENOMEM; @@ -501,7 +513,7 @@ static int usb_dsbr100_probe(struct usb_interface *intf, radio->removed = 0; radio->users = 0; radio->usbdev = interface_to_usbdev(intf); - radio->curfreq = FREQ_MIN*FREQ_MUL; + radio->curfreq = FREQ_MIN * FREQ_MUL; video_set_drvdata(radio->videodev, radio); if (video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr) < 0) { dev_warn(&intf->dev, "Could not register video device\n"); diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c index a33717c48003..256cbeffdcb6 100644 --- a/drivers/media/radio/radio-mr800.c +++ b/drivers/media/radio/radio-mr800.c @@ -469,16 +469,21 @@ static int usb_amradio_open(struct inode *inode, struct file *file) { struct amradio_device *radio = video_get_drvdata(video_devdata(file)); + lock_kernel(); + radio->users = 1; radio->muted = 1; if (amradio_start(radio) < 0) { warn("Radio did not start up properly"); radio->users = 0; + unlock_kernel(); return -EIO; } if (amradio_setfreq(radio, radio->curfreq) < 0) warn("Set frequency failed"); + + unlock_kernel(); return 0; } diff --git a/drivers/media/video/arv.c b/drivers/media/video/arv.c index 218754b4906a..e09b00693230 100644 --- a/drivers/media/video/arv.c +++ b/drivers/media/video/arv.c @@ -866,7 +866,7 @@ static int __init ar_init(void) } printk("video%d: Found M64278 VGA (IRQ %d, Freq %dMHz).\n", - ar->vdev->minor, M32R_IRQ_INT3, freq); + ar->vdev->num, M32R_IRQ_INT3, freq); return 0; diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c index 5858bf5ff41c..9ec4cec2e52d 100644 --- a/drivers/media/video/bt8xx/bttv-driver.c +++ b/drivers/media/video/bt8xx/bttv-driver.c @@ -4246,7 +4246,7 @@ static int __devinit bttv_register_video(struct bttv *btv) video_nr[btv->c.nr]) < 0) goto err; printk(KERN_INFO "bttv%d: registered device video%d\n", - btv->c.nr,btv->video_dev->minor & 0x1f); + btv->c.nr, btv->video_dev->num); if (device_create_file(&btv->video_dev->dev, &dev_attr_card)<0) { printk(KERN_ERR "bttv%d: device_create_file 'card' " @@ -4263,7 +4263,7 @@ static int __devinit bttv_register_video(struct bttv *btv) vbi_nr[btv->c.nr]) < 0) goto err; printk(KERN_INFO "bttv%d: registered device vbi%d\n", - btv->c.nr,btv->vbi_dev->minor & 0x1f); + btv->c.nr, btv->vbi_dev->num); if (!btv->has_radio) return 0; @@ -4275,7 +4275,7 @@ static int __devinit bttv_register_video(struct bttv *btv) radio_nr[btv->c.nr]) < 0) goto err; printk(KERN_INFO "bttv%d: registered device radio%d\n", - btv->c.nr,btv->radio_dev->minor & 0x1f); + btv->c.nr, btv->radio_dev->num); /* all done */ return 0; diff --git a/drivers/media/video/c-qcam.c b/drivers/media/video/c-qcam.c index 17aa0adb3467..0f930d351466 100644 --- a/drivers/media/video/c-qcam.c +++ b/drivers/media/video/c-qcam.c @@ -815,7 +815,7 @@ static int init_cqcam(struct parport *port) } printk(KERN_INFO "video%d: Colour QuickCam found on %s\n", - qcam->vdev.minor, qcam->pport->name); + qcam->vdev.num, qcam->pport->name); qcams[num_cams++] = qcam; diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c index fc9497bdd322..a8c068e1de1c 100644 --- a/drivers/media/video/cafe_ccic.c +++ b/drivers/media/video/cafe_ccic.c @@ -2059,10 +2059,10 @@ static void cafe_dfs_cam_setup(struct cafe_camera *cam) if (!cafe_dfs_root) return; - sprintf(fname, "regs-%d", cam->v4ldev.minor); + sprintf(fname, "regs-%d", cam->v4ldev.num); cam->dfs_regs = debugfs_create_file(fname, 0444, cafe_dfs_root, cam, &cafe_dfs_reg_ops); - sprintf(fname, "cam-%d", cam->v4ldev.minor); + sprintf(fname, "cam-%d", cam->v4ldev.num); cam->dfs_cam_regs = debugfs_create_file(fname, 0444, cafe_dfs_root, cam, &cafe_dfs_cam_ops); } diff --git a/drivers/media/video/cpia.c b/drivers/media/video/cpia.c index 1798b779a25a..16c094f77852 100644 --- a/drivers/media/video/cpia.c +++ b/drivers/media/video/cpia.c @@ -1347,7 +1347,7 @@ static void create_proc_cpia_cam(struct cam_data *cam) if (!cpia_proc_root || !cam) return; - snprintf(name, sizeof(name), "video%d", cam->vdev.minor); + snprintf(name, sizeof(name), "video%d", cam->vdev.num); ent = create_proc_entry(name, S_IFREG|S_IRUGO|S_IWUSR, cpia_proc_root); if (!ent) @@ -1372,7 +1372,7 @@ static void destroy_proc_cpia_cam(struct cam_data *cam) if (!cam || !cam->proc_entry) return; - snprintf(name, sizeof(name), "video%d", cam->vdev.minor); + snprintf(name, sizeof(name), "video%d", cam->vdev.num); remove_proc_entry(name, cpia_proc_root); cam->proc_entry = NULL; } @@ -4005,7 +4005,7 @@ void cpia_unregister_camera(struct cam_data *cam) } #ifdef CONFIG_PROC_FS - DBG("destroying /proc/cpia/video%d\n", cam->vdev.minor); + DBG("destroying /proc/cpia/video%d\n", cam->vdev.num); destroy_proc_cpia_cam(cam); #endif if (!cam->open_count) { diff --git a/drivers/media/video/cpia2/cpia2_v4l.c b/drivers/media/video/cpia2/cpia2_v4l.c index 897e8d1a5c3c..1c6bd633f193 100644 --- a/drivers/media/video/cpia2/cpia2_v4l.c +++ b/drivers/media/video/cpia2/cpia2_v4l.c @@ -1973,7 +1973,7 @@ void cpia2_unregister_camera(struct camera_data *cam) } else { LOG("/dev/video%d removed while open, " "deferring video_unregister_device\n", - cam->vdev->minor); + cam->vdev->num); } } diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 085121c2b47f..7a1a7830a6b3 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -613,6 +613,7 @@ static int __devinit cx18_probe(struct pci_dev *dev, const struct pci_device_id *pci_id) { int retval = 0; + int i; int vbi_buf_size; u32 devtype; struct cx18 *cx; @@ -698,7 +699,8 @@ static int __devinit cx18_probe(struct pci_dev *dev, /* active i2c */ CX18_DEBUG_INFO("activating i2c...\n"); - if (init_cx18_i2c(cx)) { + retval = init_cx18_i2c(cx); + if (retval) { CX18_ERR("Could not initialize i2c\n"); goto free_map; } @@ -836,8 +838,11 @@ err: CX18_ERR("Error %d on initialization\n", retval); cx18_log_statistics(cx); - kfree(cx18_cards[cx18_cards_active]); - cx18_cards[cx18_cards_active] = NULL; + i = cx->num; + spin_lock(&cx18_cards_lock); + kfree(cx18_cards[i]); + cx18_cards[i] = NULL; + spin_unlock(&cx18_cards_lock); return retval; } diff --git a/drivers/media/video/cx18/cx18-io.h b/drivers/media/video/cx18/cx18-io.h index 197d4fbd9f95..287a5e8bf67b 100644 --- a/drivers/media/video/cx18/cx18-io.h +++ b/drivers/media/video/cx18/cx18-io.h @@ -39,7 +39,7 @@ static inline void cx18_io_delay(struct cx18 *cx) /* Statistics gathering */ static inline -void cx18_log_write_retries(struct cx18 *cx, int i, const void *addr) +void cx18_log_write_retries(struct cx18 *cx, int i, const void __iomem *addr) { if (i > CX18_MAX_MMIO_RETRIES) i = CX18_MAX_MMIO_RETRIES; @@ -48,7 +48,7 @@ void cx18_log_write_retries(struct cx18 *cx, int i, const void *addr) } static inline -void cx18_log_read_retries(struct cx18 *cx, int i, const void *addr) +void cx18_log_read_retries(struct cx18 *cx, int i, const void __iomem *addr) { if (i > CX18_MAX_MMIO_RETRIES) i = CX18_MAX_MMIO_RETRIES; diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index 0c8e7542cf60..e5ff7705b7a1 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -200,16 +200,18 @@ static int cx18_prep_dev(struct cx18 *cx, int type) /* Initialize v4l2 variables and register v4l2 devices */ int cx18_streams_setup(struct cx18 *cx) { - int type; + int type, ret; /* Setup V4L2 Devices */ for (type = 0; type < CX18_MAX_STREAMS; type++) { /* Prepare device */ - if (cx18_prep_dev(cx, type)) + ret = cx18_prep_dev(cx, type); + if (ret < 0) break; /* Allocate Stream */ - if (cx18_stream_alloc(&cx->streams[type])) + ret = cx18_stream_alloc(&cx->streams[type]); + if (ret < 0) break; } if (type == CX18_MAX_STREAMS) @@ -217,14 +219,14 @@ int cx18_streams_setup(struct cx18 *cx) /* One or more streams could not be initialized. Clean 'em all up. */ cx18_streams_cleanup(cx, 0); - return -ENOMEM; + return ret; } static int cx18_reg_dev(struct cx18 *cx, int type) { struct cx18_stream *s = &cx->streams[type]; int vfl_type = cx18_stream_info[type].vfl_type; - int num; + int num, ret; /* TODO: Shouldn't this be a VFL_TYPE_TRANSPORT or something? * We need a VFL_TYPE_TS defined. @@ -233,9 +235,10 @@ static int cx18_reg_dev(struct cx18 *cx, int type) /* just return if no DVB is supported */ if ((cx->card->hw_all & CX18_HW_DVB) == 0) return 0; - if (cx18_dvb_register(s) < 0) { + ret = cx18_dvb_register(s); + if (ret < 0) { CX18_ERR("DVB failed to register\n"); - return -EINVAL; + return ret; } } @@ -252,12 +255,13 @@ static int cx18_reg_dev(struct cx18 *cx, int type) } /* Register device. First try the desired minor, then any free one. */ - if (video_register_device(s->v4l2dev, vfl_type, num)) { + ret = video_register_device(s->v4l2dev, vfl_type, num); + if (ret < 0) { CX18_ERR("Couldn't register v4l2 device for %s kernel number %d\n", s->name, num); video_device_release(s->v4l2dev); s->v4l2dev = NULL; - return -ENOMEM; + return ret; } num = s->v4l2dev->num; @@ -290,18 +294,22 @@ static int cx18_reg_dev(struct cx18 *cx, int type) int cx18_streams_register(struct cx18 *cx) { int type; - int err = 0; + int err; + int ret = 0; /* Register V4L2 devices */ - for (type = 0; type < CX18_MAX_STREAMS; type++) - err |= cx18_reg_dev(cx, type); + for (type = 0; type < CX18_MAX_STREAMS; type++) { + err = cx18_reg_dev(cx, type); + if (err && ret == 0) + ret = err; + } - if (err == 0) + if (ret == 0) return 0; /* One or more streams could not be initialized. Clean 'em all up. */ cx18_streams_cleanup(cx, 1); - return -ENOMEM; + return ret; } /* Unregister v4l2 devices */ diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c index 395c11fa47ce..00831f3ef8f5 100644 --- a/drivers/media/video/cx23885/cx23885-417.c +++ b/drivers/media/video/cx23885/cx23885-417.c @@ -1815,7 +1815,7 @@ int cx23885_417_register(struct cx23885_dev *dev) cx23885_mc417_init(dev); printk(KERN_INFO "%s: registered device video%d [mpeg]\n", - dev->name, dev->v4l_device->minor & 0x1f); + dev->name, dev->v4l_device->num); return 0; } diff --git a/drivers/media/video/cx23885/cx23885-video.c b/drivers/media/video/cx23885/cx23885-video.c index ab3110d6046c..c742a10be5cb 100644 --- a/drivers/media/video/cx23885/cx23885-video.c +++ b/drivers/media/video/cx23885/cx23885-video.c @@ -1543,7 +1543,7 @@ int cx23885_video_register(struct cx23885_dev *dev) goto fail_unreg; } printk(KERN_INFO "%s/0: registered device video%d [v4l2]\n", - dev->name, dev->video_dev->minor & 0x1f); + dev->name, dev->video_dev->num); /* initial device configuration */ mutex_lock(&dev->lock); cx23885_set_tvnorm(dev, dev->tvnorm); diff --git a/drivers/media/video/cx88/cx88-blackbird.c b/drivers/media/video/cx88/cx88-blackbird.c index e71369754305..078be6319556 100644 --- a/drivers/media/video/cx88/cx88-blackbird.c +++ b/drivers/media/video/cx88/cx88-blackbird.c @@ -1285,7 +1285,7 @@ static int blackbird_register_video(struct cx8802_dev *dev) return err; } printk(KERN_INFO "%s/2: registered device video%d [mpeg]\n", - dev->core->name,dev->mpeg_dev->minor & 0x1f); + dev->core->name, dev->mpeg_dev->num); return 0; } diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index fbc224f46e0e..5bcbb4cc7c2a 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -3044,8 +3044,8 @@ struct cx88_core *cx88_core_create(struct pci_dev *pci, int nr) memcpy(&core->board, &cx88_boards[core->boardnr], sizeof(core->board)); - if (!core->board.num_frontends) - core->board.num_frontends=1; + if (!core->board.num_frontends && (core->board.mpeg & CX88_MPEG_DVB)) + core->board.num_frontends = 1; info_printk(core, "subsystem: %04x:%04x, board: %s [card=%d,%s], frontend(s): %d\n", pci->subsystem_vendor, pci->subsystem_device, core->board.name, diff --git a/drivers/media/video/cx88/cx88-dvb.c b/drivers/media/video/cx88/cx88-dvb.c index 6968ab0181aa..cf6c30d4e545 100644 --- a/drivers/media/video/cx88/cx88-dvb.c +++ b/drivers/media/video/cx88/cx88-dvb.c @@ -789,7 +789,7 @@ static int dvb_register(struct cx8802_dev *dev) if (fe0->dvb.frontend) fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; if (attach_xc3028(0x61, dev) < 0) - return -EINVAL; + goto frontend_detach; break; case CX88_BOARD_PCHDTV_HD3000: fe0->dvb.frontend = dvb_attach(or51132_attach, &pchdtv_hd3000, @@ -1058,7 +1058,6 @@ static int dvb_register(struct cx8802_dev *dev) goto frontend_detach; core->prev_set_voltage = fe0->dvb.frontend->ops.set_voltage; fe0->dvb.frontend->ops.set_voltage = tevii_dvbs_set_voltage; - } } break; @@ -1110,10 +1109,7 @@ static int dvb_register(struct cx8802_dev *dev) &dev->pci->dev, adapter_nr, mfe_shared); frontend_detach: - if (fe0->dvb.frontend) { - dvb_frontend_detach(fe0->dvb.frontend); - fe0->dvb.frontend = NULL; - } + videobuf_dvb_dealloc_frontends(&dev->frontends); return -EINVAL; } @@ -1246,8 +1242,11 @@ fail_core: static int cx8802_dvb_remove(struct cx8802_driver *drv) { + struct cx88_core *core = drv->core; struct cx8802_dev *dev = drv->core->dvbdev; + dprintk( 1, "%s\n", __func__); + videobuf_dvb_unregister_bus(&dev->frontends); vp3054_i2c_remove(dev); diff --git a/drivers/media/video/cx88/cx88-i2c.c b/drivers/media/video/cx88/cx88-i2c.c index 01de23007095..1ab691d20692 100644 --- a/drivers/media/video/cx88/cx88-i2c.c +++ b/drivers/media/video/cx88/cx88-i2c.c @@ -116,8 +116,10 @@ static int detach_inform(struct i2c_client *client) void cx88_call_i2c_clients(struct cx88_core *core, unsigned int cmd, void *arg) { +#if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE) struct videobuf_dvb_frontends *f = &core->dvbdev->frontends; struct videobuf_dvb_frontend *fe = NULL; +#endif if (0 != core->i2c_rc) return; diff --git a/drivers/media/video/cx88/cx88-mpeg.c b/drivers/media/video/cx88/cx88-mpeg.c index 6df5cf314186..a1c435b4b1cd 100644 --- a/drivers/media/video/cx88/cx88-mpeg.c +++ b/drivers/media/video/cx88/cx88-mpeg.c @@ -768,8 +768,11 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev, { struct cx8802_dev *dev; struct cx88_core *core; + int err; +#if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE) struct videobuf_dvb_frontend *demod; - int err,i; + int i; +#endif /* general setup */ core = cx88_core_get(pci_dev); @@ -782,11 +785,6 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev, if (!core->board.mpeg) goto fail_core; - if (!core->board.num_frontends) { - printk(KERN_ERR "%s() .num_frontends should be non-zero, err = %d\n", __func__, err); - goto fail_core; - } - err = -ENOMEM; dev = kzalloc(sizeof(*dev),GFP_KERNEL); if (NULL == dev) @@ -801,10 +799,12 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev, INIT_LIST_HEAD(&dev->drvlist); list_add_tail(&dev->devlist,&cx8802_devlist); +#if defined(CONFIG_VIDEO_CX88_DVB) || defined(CONFIG_VIDEO_CX88_DVB_MODULE) mutex_init(&dev->frontends.lock); INIT_LIST_HEAD(&dev->frontends.felist); - printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, core->board.num_frontends); + if (core->board.num_frontends) + printk(KERN_INFO "%s() allocating %d frontend(s)\n", __func__, core->board.num_frontends); for (i = 1; i <= core->board.num_frontends; i++) { demod = videobuf_dvb_alloc_frontend(&dev->frontends, i); @@ -814,6 +814,7 @@ static int __devinit cx8802_probe(struct pci_dev *pci_dev, goto fail_free; } } +#endif /* Maintain a reference so cx88-video can query the 8802 device. */ core->dvbdev = dev; diff --git a/drivers/media/video/cx88/cx88-video.c b/drivers/media/video/cx88/cx88-video.c index 3904b73f52ee..61265fd04d56 100644 --- a/drivers/media/video/cx88/cx88-video.c +++ b/drivers/media/video/cx88/cx88-video.c @@ -1911,7 +1911,7 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev, goto fail_unreg; } printk(KERN_INFO "%s/0: registered device video%d [v4l2]\n", - core->name,dev->video_dev->minor & 0x1f); + core->name, dev->video_dev->num); dev->vbi_dev = cx88_vdev_init(core,dev->pci,&cx8800_vbi_template,"vbi"); err = video_register_device(dev->vbi_dev,VFL_TYPE_VBI, @@ -1922,7 +1922,7 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev, goto fail_unreg; } printk(KERN_INFO "%s/0: registered device vbi%d\n", - core->name,dev->vbi_dev->minor & 0x1f); + core->name, dev->vbi_dev->num); if (core->board.radio.type == CX88_RADIO) { dev->radio_dev = cx88_vdev_init(core,dev->pci, @@ -1935,7 +1935,7 @@ static int __devinit cx8800_initdev(struct pci_dev *pci_dev, goto fail_unreg; } printk(KERN_INFO "%s/0: registered device radio%d\n", - core->name,dev->radio_dev->minor & 0x1f); + core->name, dev->radio_dev->num); } /* everything worked */ diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index c53649e5315b..a1ab2ef45578 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -2042,7 +2042,7 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev, goto fail_unreg; } em28xx_info("Registered radio device as /dev/radio%d\n", - dev->radio_dev->minor & 0x1f); + dev->radio_dev->num); } /* init video dma queues */ diff --git a/drivers/media/video/et61x251/et61x251_core.c b/drivers/media/video/et61x251/et61x251_core.c index 7a85c41b0eea..9d0ef96c23ff 100644 --- a/drivers/media/video/et61x251/et61x251_core.c +++ b/drivers/media/video/et61x251/et61x251_core.c @@ -588,7 +588,7 @@ static int et61x251_stream_interrupt(struct et61x251_device* cam) cam->state |= DEV_MISCONFIGURED; DBG(1, "URB timeout reached. The camera is misconfigured. To " "use it, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -EIO; } @@ -1195,7 +1195,7 @@ static void et61x251_release_resources(struct kref *kref) cam = container_of(kref, struct et61x251_device, kref); - DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor); + DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->num); video_set_drvdata(cam->v4ldev, NULL); video_unregister_device(cam->v4ldev); usb_put_dev(cam->usbdev); @@ -1237,7 +1237,7 @@ static int et61x251_open(struct inode* inode, struct file* filp) if (cam->users) { DBG(2, "Device /dev/video%d is already in use", - cam->v4ldev->minor); + cam->v4ldev->num); DBG(3, "Simultaneous opens are not supported"); if ((filp->f_flags & O_NONBLOCK) || (filp->f_flags & O_NDELAY)) { @@ -1280,7 +1280,7 @@ static int et61x251_open(struct inode* inode, struct file* filp) cam->frame_count = 0; et61x251_empty_framequeues(cam); - DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor); + DBG(3, "Video device /dev/video%d is open", cam->v4ldev->num); out: mutex_unlock(&cam->open_mutex); @@ -1304,7 +1304,7 @@ static int et61x251_release(struct inode* inode, struct file* filp) cam->users--; wake_up_interruptible_nr(&cam->wait_open, 1); - DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor); + DBG(3, "Video device /dev/video%d closed", cam->v4ldev->num); kref_put(&cam->kref, et61x251_release_resources); @@ -1845,7 +1845,7 @@ et61x251_vidioc_s_crop(struct et61x251_device* cam, void __user * arg) cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -EIO; } @@ -1858,7 +1858,7 @@ et61x251_vidioc_s_crop(struct et61x251_device* cam, void __user * arg) cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -ENOMEM; } @@ -2068,7 +2068,7 @@ et61x251_vidioc_try_s_fmt(struct et61x251_device* cam, unsigned int cmd, cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -EIO; } @@ -2080,7 +2080,7 @@ et61x251_vidioc_try_s_fmt(struct et61x251_device* cam, unsigned int cmd, cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -ENOMEM; } @@ -2128,7 +2128,7 @@ et61x251_vidioc_s_jpegcomp(struct et61x251_device* cam, void __user * arg) cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware " "problems. To use the camera, close and open " - "/dev/video%d again.", cam->v4ldev->minor); + "/dev/video%d again.", cam->v4ldev->num); return -EIO; } @@ -2605,7 +2605,7 @@ et61x251_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) goto fail; } - DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor); + DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->num); cam->module_param.force_munmap = force_munmap[dev_nr]; cam->module_param.frame_timeout = frame_timeout[dev_nr]; @@ -2658,7 +2658,7 @@ static void et61x251_usb_disconnect(struct usb_interface* intf) if (cam->users) { DBG(2, "Device /dev/video%d is open! Deregistration and " "memory deallocation are deferred.", - cam->v4ldev->minor); + cam->v4ldev->num); cam->state |= DEV_MISCONFIGURED; et61x251_stop_transfer(cam); cam->state |= DEV_DISCONNECTED; diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c index aeaa13f6cb36..d36485023b68 100644 --- a/drivers/media/video/ivtv/ivtv-driver.c +++ b/drivers/media/video/ivtv/ivtv-driver.c @@ -1211,6 +1211,10 @@ static int __devinit ivtv_probe(struct pci_dev *dev, if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) { ivtv_call_i2c_clients(itv, VIDIOC_INT_S_STD_OUTPUT, &itv->std); + /* Turn off the output signal. The mpeg decoder is not yet + active so without this you would get a green image until the + mpeg decoder becomes active. */ + ivtv_saa7127(itv, VIDIOC_STREAMOFF, NULL); } /* clear interrupt mask, effectively disabling interrupts */ @@ -1330,6 +1334,10 @@ int ivtv_init_on_first_open(struct ivtv *itv) ivtv_s_frequency(NULL, &fh, &vf); if (itv->card->v4l2_capabilities & V4L2_CAP_VIDEO_OUTPUT) { + /* Turn on the TV-out: ivtv_init_mpeg_decoder() initializes + the mpeg decoder so now the saa7127 receives a proper + signal. */ + ivtv_saa7127(itv, VIDIOC_STREAMON, NULL); ivtv_init_mpeg_decoder(itv); } ivtv_s_std(NULL, &fh, &itv->tuner_std); @@ -1366,6 +1374,10 @@ static void ivtv_remove(struct pci_dev *pci_dev) /* Stop all decoding */ IVTV_DEBUG_INFO("Stopping decoding\n"); + + /* Turn off the TV-out */ + if (itv->v4l2_cap & V4L2_CAP_VIDEO_OUTPUT) + ivtv_saa7127(itv, VIDIOC_STREAMOFF, NULL); if (atomic_read(&itv->decoding) > 0) { int type; diff --git a/drivers/media/video/ivtv/ivtv-i2c.c b/drivers/media/video/ivtv/ivtv-i2c.c index 24700c211d52..41dbbe9621a1 100644 --- a/drivers/media/video/ivtv/ivtv-i2c.c +++ b/drivers/media/video/ivtv/ivtv-i2c.c @@ -726,6 +726,7 @@ int ivtv_saa7127(struct ivtv *itv, unsigned int cmd, void *arg) { return ivtv_call_i2c_client(itv, IVTV_SAA7127_I2C_ADDR, cmd, arg); } +EXPORT_SYMBOL(ivtv_saa7127); int ivtv_saa717x(struct ivtv *itv, unsigned int cmd, void *arg) { diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c index 208fb54842f2..4bae38d21ef6 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.c +++ b/drivers/media/video/ivtv/ivtv-ioctl.c @@ -1756,12 +1756,12 @@ static int ivtv_default(struct file *file, void *fh, int cmd, void *arg) return 0; } -static int ivtv_serialized_ioctl(struct ivtv *itv, struct inode *inode, struct file *filp, +static long ivtv_serialized_ioctl(struct ivtv *itv, struct file *filp, unsigned int cmd, unsigned long arg) { struct video_device *vfd = video_devdata(filp); struct ivtv_open_id *id = (struct ivtv_open_id *)filp->private_data; - int ret; + long ret; /* Filter dvb ioctls that cannot be handled by the v4l ioctl framework */ switch (cmd) { @@ -1830,20 +1830,19 @@ static int ivtv_serialized_ioctl(struct ivtv *itv, struct inode *inode, struct f if (ivtv_debug & IVTV_DBGFLG_IOCTL) vfd->debug = V4L2_DEBUG_IOCTL | V4L2_DEBUG_IOCTL_ARG; - ret = video_ioctl2(inode, filp, cmd, arg); + ret = __video_ioctl2(filp, cmd, arg); vfd->debug = 0; return ret; } -int ivtv_v4l2_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, - unsigned long arg) +long ivtv_v4l2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) { struct ivtv_open_id *id = (struct ivtv_open_id *)filp->private_data; struct ivtv *itv = id->itv; - int res; + long res; mutex_lock(&itv->serialize_lock); - res = ivtv_serialized_ioctl(itv, inode, filp, cmd, arg); + res = ivtv_serialized_ioctl(itv, filp, cmd, arg); mutex_unlock(&itv->serialize_lock); return res; } diff --git a/drivers/media/video/ivtv/ivtv-ioctl.h b/drivers/media/video/ivtv/ivtv-ioctl.h index 70188588b4f4..58f003412afd 100644 --- a/drivers/media/video/ivtv/ivtv-ioctl.h +++ b/drivers/media/video/ivtv/ivtv-ioctl.h @@ -30,7 +30,6 @@ void ivtv_set_funcs(struct video_device *vdev); int ivtv_s_std(struct file *file, void *fh, v4l2_std_id *std); int ivtv_s_frequency(struct file *file, void *fh, struct v4l2_frequency *vf); int ivtv_s_input(struct file *file, void *fh, unsigned int inp); -int ivtv_v4l2_ioctl(struct inode *inode, struct file *filp, unsigned int cmd, - unsigned long arg); +long ivtv_v4l2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg); #endif diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c index 5bbf31e39304..9b7aa79eb267 100644 --- a/drivers/media/video/ivtv/ivtv-streams.c +++ b/drivers/media/video/ivtv/ivtv-streams.c @@ -48,7 +48,7 @@ static const struct file_operations ivtv_v4l2_enc_fops = { .read = ivtv_v4l2_read, .write = ivtv_v4l2_write, .open = ivtv_v4l2_open, - .ioctl = ivtv_v4l2_ioctl, + .unlocked_ioctl = ivtv_v4l2_ioctl, .compat_ioctl = v4l_compat_ioctl32, .release = ivtv_v4l2_close, .poll = ivtv_v4l2_enc_poll, @@ -59,7 +59,7 @@ static const struct file_operations ivtv_v4l2_dec_fops = { .read = ivtv_v4l2_read, .write = ivtv_v4l2_write, .open = ivtv_v4l2_open, - .ioctl = ivtv_v4l2_ioctl, + .unlocked_ioctl = ivtv_v4l2_ioctl, .compat_ioctl = v4l_compat_ioctl32, .release = ivtv_v4l2_close, .poll = ivtv_v4l2_dec_poll, diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c index 8a4a150b12fb..921e281876f8 100644 --- a/drivers/media/video/ivtv/ivtvfb.c +++ b/drivers/media/video/ivtv/ivtvfb.c @@ -48,6 +48,7 @@ #endif #include "ivtv-driver.h" +#include "ivtv-i2c.h" #include "ivtv-udma.h" #include "ivtv-mailbox.h" @@ -894,11 +895,16 @@ static int ivtvfb_blank(int blank_mode, struct fb_info *info) switch (blank_mode) { case FB_BLANK_UNBLANK: ivtv_vapi(itv, CX2341X_OSD_SET_STATE, 1, 1); + ivtv_saa7127(itv, VIDIOC_STREAMON, NULL); break; case FB_BLANK_NORMAL: case FB_BLANK_HSYNC_SUSPEND: case FB_BLANK_VSYNC_SUSPEND: + ivtv_vapi(itv, CX2341X_OSD_SET_STATE, 1, 0); + ivtv_saa7127(itv, VIDIOC_STREAMON, NULL); + break; case FB_BLANK_POWERDOWN: + ivtv_saa7127(itv, VIDIOC_STREAMOFF, NULL); ivtv_vapi(itv, CX2341X_OSD_SET_STATE, 1, 0); break; } diff --git a/drivers/media/video/pvrusb2/pvrusb2-encoder.c b/drivers/media/video/pvrusb2/pvrusb2-encoder.c index a1252d673b41..273d2a1aa220 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-encoder.c +++ b/drivers/media/video/pvrusb2/pvrusb2-encoder.c @@ -402,6 +402,10 @@ static int pvr2_encoder_prep_config(struct pvr2_hdw *hdw) ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4, 0,3,0,0); ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC,4,15,0,0,0); + /* prevent the PTSs from slowly drifting away in the generated + MPEG stream */ + ret |= pvr2_encoder_vcmd(hdw, CX2341X_ENC_MISC, 2, 4, 1); + return ret; } diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c index 94265bd3d926..5b81ba469641 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c +++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c @@ -60,7 +60,6 @@ static struct pvr2_hdw *unit_pointers[PVR_NUM] = {[ 0 ... PVR_NUM-1 ] = NULL}; static DEFINE_MUTEX(pvr2_unit_mtx); static int ctlchg; -static int initusbreset = 1; static int procreload; static int tuner[PVR_NUM] = { [0 ... PVR_NUM-1] = -1 }; static int tolerance[PVR_NUM] = { [0 ... PVR_NUM-1] = 0 }; @@ -71,8 +70,6 @@ module_param(ctlchg, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ctlchg, "0=optimize ctl change 1=always accept new ctl value"); module_param(init_pause_msec, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(init_pause_msec, "hardware initialization settling delay"); -module_param(initusbreset, int, S_IRUGO|S_IWUSR); -MODULE_PARM_DESC(initusbreset, "Do USB reset device on probe"); module_param(procreload, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(procreload, "Attempt init failure recovery with firmware reload"); @@ -1967,9 +1964,6 @@ static void pvr2_hdw_setup_low(struct pvr2_hdw *hdw) } hdw->fw1_state = FW1_STATE_OK; - if (initusbreset) { - pvr2_hdw_device_reset(hdw); - } if (!pvr2_hdw_dev_ok(hdw)) return; for (idx = 0; idx < hdw->hdw_desc->client_modules.cnt; idx++) { diff --git a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c index f048d80b77e5..97ed95957992 100644 --- a/drivers/media/video/pvrusb2/pvrusb2-v4l2.c +++ b/drivers/media/video/pvrusb2/pvrusb2-v4l2.c @@ -168,7 +168,7 @@ static const char *get_v4l_name(int v4l_type) * This is part of Video 4 Linux API. The procedure handles ioctl() calls. * */ -static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file, +static int __pvr2_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) { struct pvr2_v4l2_fh *fh = file->private_data; @@ -863,8 +863,8 @@ static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file, #endif default : - ret = v4l_compat_translate_ioctl(inode,file,cmd, - arg,pvr2_v4l2_do_ioctl); + ret = v4l_compat_translate_ioctl(file, cmd, + arg, __pvr2_v4l2_do_ioctl); } pvr2_hdw_commit_ctl(hdw); @@ -890,10 +890,15 @@ static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file, return ret; } +static int pvr2_v4l2_do_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + return __pvr2_v4l2_do_ioctl(file, cmd, arg); +} static void pvr2_v4l2_dev_destroy(struct pvr2_v4l2_dev *dip) { - int minor_id = dip->devbase.minor; + int num = dip->devbase.num; struct pvr2_hdw *hdw = dip->v4lp->channel.mc_head->hdw; enum pvr2_config cfg = dip->config; int v4l_type = dip->v4l_type; @@ -909,7 +914,7 @@ static void pvr2_v4l2_dev_destroy(struct pvr2_v4l2_dev *dip) video_unregister_device(&dip->devbase); printk(KERN_INFO "pvrusb2: unregistered device %s%u [%s]\n", - get_v4l_name(v4l_type),minor_id & 0x1f, + get_v4l_name(v4l_type), num, pvr2_config_get_name(cfg)); } @@ -1310,7 +1315,7 @@ static void pvr2_v4l2_dev_init(struct pvr2_v4l2_dev *dip, } printk(KERN_INFO "pvrusb2: registered device %s%u [%s]\n", - get_v4l_name(dip->v4l_type),dip->devbase.minor & 0x1f, + get_v4l_name(dip->v4l_type), dip->devbase.num, pvr2_config_get_name(dip->config)); pvr2_hdw_v4l_store_minor_number(vp->channel.mc_head->hdw, diff --git a/drivers/media/video/pwc/pwc-if.c b/drivers/media/video/pwc/pwc-if.c index ab28389b4cda..f3897a3fdb75 100644 --- a/drivers/media/video/pwc/pwc-if.c +++ b/drivers/media/video/pwc/pwc-if.c @@ -1795,7 +1795,7 @@ static int usb_pwc_probe(struct usb_interface *intf, const struct usb_device_id goto err; } else { - PWC_INFO("Registered as /dev/video%d.\n", pdev->vdev->minor & 0x3F); + PWC_INFO("Registered as /dev/video%d.\n", pdev->vdev->num); } /* occupy slot */ diff --git a/drivers/media/video/saa7134/saa7134-core.c b/drivers/media/video/saa7134/saa7134-core.c index b686bfabbde0..249184452949 100644 --- a/drivers/media/video/saa7134/saa7134-core.c +++ b/drivers/media/video/saa7134/saa7134-core.c @@ -996,7 +996,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, goto fail4; } printk(KERN_INFO "%s: registered device video%d [v4l2]\n", - dev->name,dev->video_dev->minor & 0x1f); + dev->name, dev->video_dev->num); dev->vbi_dev = vdev_init(dev, &saa7134_video_template, "vbi"); @@ -1005,7 +1005,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, if (err < 0) goto fail4; printk(KERN_INFO "%s: registered device vbi%d\n", - dev->name,dev->vbi_dev->minor & 0x1f); + dev->name, dev->vbi_dev->num); if (card_has_radio(dev)) { dev->radio_dev = vdev_init(dev,&saa7134_radio_template,"radio"); @@ -1014,7 +1014,7 @@ static int __devinit saa7134_initdev(struct pci_dev *pci_dev, if (err < 0) goto fail4; printk(KERN_INFO "%s: registered device radio%d\n", - dev->name,dev->radio_dev->minor & 0x1f); + dev->name, dev->radio_dev->num); } /* everything worked */ diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index 9a8766a78a0c..7f40511bcc04 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -534,7 +534,7 @@ static int empress_init(struct saa7134_dev *dev) return err; } printk(KERN_INFO "%s: registered device video%d [mpeg]\n", - dev->name,dev->empress_dev->minor & 0x1f); + dev->name, dev->empress_dev->num); videobuf_queue_sg_init(&dev->empress_tsq, &saa7134_ts_qops, &dev->pci->dev, &dev->slock, diff --git a/drivers/media/video/se401.c b/drivers/media/video/se401.c index ae3949180c4e..044a2e94c34d 100644 --- a/drivers/media/video/se401.c +++ b/drivers/media/video/se401.c @@ -1412,7 +1412,7 @@ static int se401_probe(struct usb_interface *intf, return -EIO; } dev_info(&intf->dev, "registered new video device: video%d\n", - se401->vdev.minor); + se401->vdev.num); usb_set_intfdata (intf, se401); return 0; diff --git a/drivers/media/video/sn9c102/sn9c102_core.c b/drivers/media/video/sn9c102/sn9c102_core.c index 20e30bd9364b..fcd2b62f92c4 100644 --- a/drivers/media/video/sn9c102/sn9c102_core.c +++ b/drivers/media/video/sn9c102/sn9c102_core.c @@ -1008,7 +1008,7 @@ static int sn9c102_stream_interrupt(struct sn9c102_device* cam) cam->state |= DEV_MISCONFIGURED; DBG(1, "URB timeout reached. The camera is misconfigured. " "To use it, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -EIO; } @@ -1734,7 +1734,7 @@ static void sn9c102_release_resources(struct kref *kref) cam = container_of(kref, struct sn9c102_device, kref); - DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor); + DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->num); video_set_drvdata(cam->v4ldev, NULL); video_unregister_device(cam->v4ldev); usb_put_dev(cam->usbdev); @@ -1792,7 +1792,7 @@ static int sn9c102_open(struct inode* inode, struct file* filp) if (cam->users) { DBG(2, "Device /dev/video%d is already in use", - cam->v4ldev->minor); + cam->v4ldev->num); DBG(3, "Simultaneous opens are not supported"); /* open() must follow the open flags and should block @@ -1845,7 +1845,7 @@ static int sn9c102_open(struct inode* inode, struct file* filp) cam->frame_count = 0; sn9c102_empty_framequeues(cam); - DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor); + DBG(3, "Video device /dev/video%d is open", cam->v4ldev->num); out: mutex_unlock(&cam->open_mutex); @@ -1870,7 +1870,7 @@ static int sn9c102_release(struct inode* inode, struct file* filp) cam->users--; wake_up_interruptible_nr(&cam->wait_open, 1); - DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor); + DBG(3, "Video device /dev/video%d closed", cam->v4ldev->num); kref_put(&cam->kref, sn9c102_release_resources); @@ -2432,7 +2432,7 @@ sn9c102_vidioc_s_crop(struct sn9c102_device* cam, void __user * arg) cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -EIO; } @@ -2445,7 +2445,7 @@ sn9c102_vidioc_s_crop(struct sn9c102_device* cam, void __user * arg) cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -ENOMEM; } @@ -2689,7 +2689,7 @@ sn9c102_vidioc_try_s_fmt(struct sn9c102_device* cam, unsigned int cmd, cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -EIO; } @@ -2701,7 +2701,7 @@ sn9c102_vidioc_try_s_fmt(struct sn9c102_device* cam, unsigned int cmd, cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -ENOMEM; } @@ -2748,7 +2748,7 @@ sn9c102_vidioc_s_jpegcomp(struct sn9c102_device* cam, void __user * arg) cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware " "problems. To use the camera, close and open " - "/dev/video%d again.", cam->v4ldev->minor); + "/dev/video%d again.", cam->v4ldev->num); return -EIO; } @@ -3348,7 +3348,7 @@ sn9c102_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) goto fail; } - DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor); + DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->num); video_set_drvdata(cam->v4ldev, cam); cam->module_param.force_munmap = force_munmap[dev_nr]; @@ -3402,7 +3402,7 @@ static void sn9c102_usb_disconnect(struct usb_interface* intf) if (cam->users) { DBG(2, "Device /dev/video%d is open! Deregistration and " "memory deallocation are deferred.", - cam->v4ldev->minor); + cam->v4ldev->num); cam->state |= DEV_MISCONFIGURED; sn9c102_stop_transfer(cam); cam->state |= DEV_DISCONNECTED; diff --git a/drivers/media/video/stk-webcam.c b/drivers/media/video/stk-webcam.c index edaea4964513..e9eb6d754d5c 100644 --- a/drivers/media/video/stk-webcam.c +++ b/drivers/media/video/stk-webcam.c @@ -1331,7 +1331,7 @@ static int stk_register_video_device(struct stk_camera *dev) STK_ERROR("v4l registration failed\n"); else STK_INFO("Syntek USB2.0 Camera is now controlling video device" - " /dev/video%d\n", dev->vdev.minor); + " /dev/video%d\n", dev->vdev.num); return err; } @@ -1426,7 +1426,7 @@ static void stk_camera_disconnect(struct usb_interface *interface) stk_remove_sysfs_files(&dev->vdev); STK_INFO("Syntek USB2.0 Camera release resources " - "video device /dev/video%d\n", dev->vdev.minor); + "video device /dev/video%d\n", dev->vdev.num); video_unregister_device(&dev->vdev); } diff --git a/drivers/media/video/stv680.c b/drivers/media/video/stv680.c index 9c549d935994..328c41b1517d 100644 --- a/drivers/media/video/stv680.c +++ b/drivers/media/video/stv680.c @@ -1470,7 +1470,8 @@ static int stv680_probe (struct usb_interface *intf, const struct usb_device_id retval = -EIO; goto error_vdev; } - PDEBUG (0, "STV(i): registered new video device: video%d", stv680->vdev->minor); + PDEBUG(0, "STV(i): registered new video device: video%d", + stv680->vdev->num); usb_set_intfdata (intf, stv680); retval = stv680_create_sysfs_files(stv680->vdev); diff --git a/drivers/media/video/usbvideo/usbvideo.c b/drivers/media/video/usbvideo/usbvideo.c index 07cd87d16f69..7c575bb8184f 100644 --- a/drivers/media/video/usbvideo/usbvideo.c +++ b/drivers/media/video/usbvideo/usbvideo.c @@ -1059,7 +1059,7 @@ int usbvideo_RegisterVideoDevice(struct uvd *uvd) dev_info(&uvd->dev->dev, "%s on /dev/video%d: canvas=%s videosize=%s\n", (uvd->handle != NULL) ? uvd->handle->drvName : "???", - uvd->vdev.minor, tmp2, tmp1); + uvd->vdev.num, tmp2, tmp1); usb_get_dev(uvd->dev); return 0; diff --git a/drivers/media/video/usbvideo/vicam.c b/drivers/media/video/usbvideo/vicam.c index 7a127d6bfdee..8e2d58bec481 100644 --- a/drivers/media/video/usbvideo/vicam.c +++ b/drivers/media/video/usbvideo/vicam.c @@ -877,7 +877,8 @@ vicam_probe( struct usb_interface *intf, const struct usb_device_id *id) return -EIO; } - printk(KERN_INFO "ViCam webcam driver now controlling video device %d\n",cam->vdev.minor); + printk(KERN_INFO "ViCam webcam driver now controlling video device %d\n", + cam->vdev.num); usb_set_intfdata (intf, cam); diff --git a/drivers/media/video/usbvision/usbvision-i2c.c b/drivers/media/video/usbvision/usbvision-i2c.c index 92427fdc1459..9907b9aff2b9 100644 --- a/drivers/media/video/usbvision/usbvision-i2c.c +++ b/drivers/media/video/usbvision/usbvision-i2c.c @@ -236,7 +236,7 @@ int usbvision_i2c_register(struct usb_usbvision *usbvision) sizeof(struct i2c_client)); sprintf(usbvision->i2c_adap.name + strlen(usbvision->i2c_adap.name), - " #%d", usbvision->vdev->minor & 0x1f); + " #%d", usbvision->vdev->num); PDEBUG(DBG_I2C,"Adaptername: %s", usbvision->i2c_adap.name); usbvision->i2c_adap.dev.parent = &usbvision->dev->dev; diff --git a/drivers/media/video/usbvision/usbvision-video.c b/drivers/media/video/usbvision/usbvision-video.c index 77aeb39b2750..d185b57fdcd0 100644 --- a/drivers/media/video/usbvision/usbvision-video.c +++ b/drivers/media/video/usbvision/usbvision-video.c @@ -1440,7 +1440,7 @@ static void usbvision_unregister_video(struct usb_usbvision *usbvision) // vbi Device: if (usbvision->vbi) { PDEBUG(DBG_PROBE, "unregister /dev/vbi%d [v4l2]", - usbvision->vbi->minor & 0x1f); + usbvision->vbi->num); if (usbvision->vbi->minor != -1) { video_unregister_device(usbvision->vbi); } else { @@ -1452,7 +1452,7 @@ static void usbvision_unregister_video(struct usb_usbvision *usbvision) // Radio Device: if (usbvision->rdev) { PDEBUG(DBG_PROBE, "unregister /dev/radio%d [v4l2]", - usbvision->rdev->minor & 0x1f); + usbvision->rdev->num); if (usbvision->rdev->minor != -1) { video_unregister_device(usbvision->rdev); } else { @@ -1464,7 +1464,7 @@ static void usbvision_unregister_video(struct usb_usbvision *usbvision) // Video Device: if (usbvision->vdev) { PDEBUG(DBG_PROBE, "unregister /dev/video%d [v4l2]", - usbvision->vdev->minor & 0x1f); + usbvision->vdev->num); if (usbvision->vdev->minor != -1) { video_unregister_device(usbvision->vdev); } else { @@ -1490,7 +1490,7 @@ static int __devinit usbvision_register_video(struct usb_usbvision *usbvision) goto err_exit; } printk(KERN_INFO "USBVision[%d]: registered USBVision Video device /dev/video%d [v4l2]\n", - usbvision->nr,usbvision->vdev->minor & 0x1f); + usbvision->nr, usbvision->vdev->num); // Radio Device: if (usbvision_device_data[usbvision->DevModel].Radio) { @@ -1507,7 +1507,7 @@ static int __devinit usbvision_register_video(struct usb_usbvision *usbvision) goto err_exit; } printk(KERN_INFO "USBVision[%d]: registered USBVision Radio device /dev/radio%d [v4l2]\n", - usbvision->nr, usbvision->rdev->minor & 0x1f); + usbvision->nr, usbvision->rdev->num); } // vbi Device: if (usbvision_device_data[usbvision->DevModel].vbi) { @@ -1523,7 +1523,7 @@ static int __devinit usbvision_register_video(struct usb_usbvision *usbvision) goto err_exit; } printk(KERN_INFO "USBVision[%d]: registered USBVision VBI device /dev/vbi%d [v4l2] (Not Working Yet!)\n", - usbvision->nr,usbvision->vbi->minor & 0x1f); + usbvision->nr, usbvision->vbi->num); } // all done return 0; diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c index 78e4c4e09d89..758dfefaba8d 100644 --- a/drivers/media/video/uvc/uvc_v4l2.c +++ b/drivers/media/video/uvc/uvc_v4l2.c @@ -464,7 +464,7 @@ static int uvc_v4l2_release(struct inode *inode, struct file *file) return 0; } -static int uvc_v4l2_do_ioctl(struct inode *inode, struct file *file, +static int __uvc_v4l2_do_ioctl(struct file *file, unsigned int cmd, void *arg) { struct video_device *vdev = video_devdata(file); @@ -978,8 +978,8 @@ static int uvc_v4l2_do_ioctl(struct inode *inode, struct file *file, return uvc_xu_ctrl_query(video, arg, 1); default: - if ((ret = v4l_compat_translate_ioctl(inode, file, cmd, arg, - uvc_v4l2_do_ioctl)) == -ENOIOCTLCMD) + if ((ret = v4l_compat_translate_ioctl(file, cmd, arg, + __uvc_v4l2_do_ioctl)) == -ENOIOCTLCMD) uvc_trace(UVC_TRACE_IOCTL, "Unknown ioctl 0x%08x\n", cmd); return ret; @@ -988,6 +988,12 @@ static int uvc_v4l2_do_ioctl(struct inode *inode, struct file *file, return ret; } +static int uvc_v4l2_do_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + return __uvc_v4l2_do_ioctl(file, cmd, arg); +} + static int uvc_v4l2_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { diff --git a/drivers/media/video/v4l1-compat.c b/drivers/media/video/v4l1-compat.c index 928cb4037372..f13c0a9d684f 100644 --- a/drivers/media/video/v4l1-compat.c +++ b/drivers/media/video/v4l1-compat.c @@ -57,8 +57,7 @@ MODULE_LICENSE("GPL"); */ static int -get_v4l_control(struct inode *inode, - struct file *file, +get_v4l_control(struct file *file, int cid, v4l2_kioctl drv) { @@ -67,12 +66,12 @@ get_v4l_control(struct inode *inode, int err; qctrl2.id = cid; - err = drv(inode, file, VIDIOC_QUERYCTRL, &qctrl2); + err = drv(file, VIDIOC_QUERYCTRL, &qctrl2); if (err < 0) dprintk("VIDIOC_QUERYCTRL: %d\n", err); if (err == 0 && !(qctrl2.flags & V4L2_CTRL_FLAG_DISABLED)) { ctrl2.id = qctrl2.id; - err = drv(inode, file, VIDIOC_G_CTRL, &ctrl2); + err = drv(file, VIDIOC_G_CTRL, &ctrl2); if (err < 0) { dprintk("VIDIOC_G_CTRL: %d\n", err); return 0; @@ -85,8 +84,7 @@ get_v4l_control(struct inode *inode, } static int -set_v4l_control(struct inode *inode, - struct file *file, +set_v4l_control(struct file *file, int cid, int value, v4l2_kioctl drv) @@ -96,7 +94,7 @@ set_v4l_control(struct inode *inode, int err; qctrl2.id = cid; - err = drv(inode, file, VIDIOC_QUERYCTRL, &qctrl2); + err = drv(file, VIDIOC_QUERYCTRL, &qctrl2); if (err < 0) dprintk("VIDIOC_QUERYCTRL: %d\n", err); if (err == 0 && @@ -114,7 +112,7 @@ set_v4l_control(struct inode *inode, + 32767) / 65535; ctrl2.value += qctrl2.minimum; - err = drv(inode, file, VIDIOC_S_CTRL, &ctrl2); + err = drv(file, VIDIOC_S_CTRL, &ctrl2); if (err < 0) dprintk("VIDIOC_S_CTRL: %d\n", err); } @@ -222,7 +220,6 @@ static int poll_one(struct file *file, struct poll_wqueues *pwq) } static int count_inputs( - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -232,14 +229,13 @@ static int count_inputs( for (i = 0;; i++) { memset(&input2, 0, sizeof(input2)); input2.index = i; - if (0 != drv(inode, file, VIDIOC_ENUMINPUT, &input2)) + if (0 != drv(file, VIDIOC_ENUMINPUT, &input2)) break; } return i; } static int check_size( - struct inode *inode, struct file *file, v4l2_kioctl drv, int *maxw, @@ -252,14 +248,14 @@ static int check_size( memset(&fmt2, 0, sizeof(fmt2)); desc2.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - if (0 != drv(inode, file, VIDIOC_ENUM_FMT, &desc2)) + if (0 != drv(file, VIDIOC_ENUM_FMT, &desc2)) goto done; fmt2.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; fmt2.fmt.pix.width = 10000; fmt2.fmt.pix.height = 10000; fmt2.fmt.pix.pixelformat = desc2.pixelformat; - if (0 != drv(inode, file, VIDIOC_TRY_FMT, &fmt2)) + if (0 != drv(file, VIDIOC_TRY_FMT, &fmt2)) goto done; *maxw = fmt2.fmt.pix.width; @@ -273,7 +269,6 @@ done: static noinline int v4l1_compat_get_capabilities( struct video_capability *cap, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -289,13 +284,13 @@ static noinline int v4l1_compat_get_capabilities( memset(cap, 0, sizeof(*cap)); memset(&fbuf, 0, sizeof(fbuf)); - err = drv(inode, file, VIDIOC_QUERYCAP, cap2); + err = drv(file, VIDIOC_QUERYCAP, cap2); if (err < 0) { dprintk("VIDIOCGCAP / VIDIOC_QUERYCAP: %d\n", err); goto done; } if (cap2->capabilities & V4L2_CAP_VIDEO_OVERLAY) { - err = drv(inode, file, VIDIOC_G_FBUF, &fbuf); + err = drv(file, VIDIOC_G_FBUF, &fbuf); if (err < 0) { dprintk("VIDIOCGCAP / VIDIOC_G_FBUF: %d\n", err); memset(&fbuf, 0, sizeof(fbuf)); @@ -317,8 +312,8 @@ static noinline int v4l1_compat_get_capabilities( if (fbuf.capability & V4L2_FBUF_CAP_LIST_CLIPPING) cap->type |= VID_TYPE_CLIPPING; - cap->channels = count_inputs(inode, file, drv); - check_size(inode, file, drv, + cap->channels = count_inputs(file, drv); + check_size(file, drv, &cap->maxwidth, &cap->maxheight); cap->audios = 0; /* FIXME */ cap->minwidth = 48; /* FIXME */ @@ -331,7 +326,6 @@ done: static noinline int v4l1_compat_get_frame_buffer( struct video_buffer *buffer, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -341,7 +335,7 @@ static noinline int v4l1_compat_get_frame_buffer( memset(buffer, 0, sizeof(*buffer)); memset(&fbuf, 0, sizeof(fbuf)); - err = drv(inode, file, VIDIOC_G_FBUF, &fbuf); + err = drv(file, VIDIOC_G_FBUF, &fbuf); if (err < 0) { dprintk("VIDIOCGFBUF / VIDIOC_G_FBUF: %d\n", err); goto done; @@ -386,7 +380,6 @@ done: static noinline int v4l1_compat_set_frame_buffer( struct video_buffer *buffer, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -415,7 +408,7 @@ static noinline int v4l1_compat_set_frame_buffer( break; } fbuf.fmt.bytesperline = buffer->bytesperline; - err = drv(inode, file, VIDIOC_S_FBUF, &fbuf); + err = drv(file, VIDIOC_S_FBUF, &fbuf); if (err < 0) dprintk("VIDIOCSFBUF / VIDIOC_S_FBUF: %d\n", err); return err; @@ -423,7 +416,6 @@ static noinline int v4l1_compat_set_frame_buffer( static noinline int v4l1_compat_get_win_cap_dimensions( struct video_window *win, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -438,7 +430,7 @@ static noinline int v4l1_compat_get_win_cap_dimensions( memset(win, 0, sizeof(*win)); fmt->type = V4L2_BUF_TYPE_VIDEO_OVERLAY; - err = drv(inode, file, VIDIOC_G_FMT, fmt); + err = drv(file, VIDIOC_G_FMT, fmt); if (err < 0) dprintk("VIDIOCGWIN / VIDIOC_G_WIN: %d\n", err); if (err == 0) { @@ -453,7 +445,7 @@ static noinline int v4l1_compat_get_win_cap_dimensions( } fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - err = drv(inode, file, VIDIOC_G_FMT, fmt); + err = drv(file, VIDIOC_G_FMT, fmt); if (err < 0) { dprintk("VIDIOCGWIN / VIDIOC_G_FMT: %d\n", err); goto done; @@ -472,7 +464,6 @@ done: static noinline int v4l1_compat_set_win_cap_dimensions( struct video_window *win, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -485,8 +476,8 @@ static noinline int v4l1_compat_set_win_cap_dimensions( return err; } fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - drv(inode, file, VIDIOC_STREAMOFF, &fmt->type); - err1 = drv(inode, file, VIDIOC_G_FMT, fmt); + drv(file, VIDIOC_STREAMOFF, &fmt->type); + err1 = drv(file, VIDIOC_G_FMT, fmt); if (err1 < 0) dprintk("VIDIOCSWIN / VIDIOC_G_FMT: %d\n", err1); if (err1 == 0) { @@ -494,7 +485,7 @@ static noinline int v4l1_compat_set_win_cap_dimensions( fmt->fmt.pix.height = win->height; fmt->fmt.pix.field = V4L2_FIELD_ANY; fmt->fmt.pix.bytesperline = 0; - err = drv(inode, file, VIDIOC_S_FMT, fmt); + err = drv(file, VIDIOC_S_FMT, fmt); if (err < 0) dprintk("VIDIOCSWIN / VIDIOC_S_FMT #1: %d\n", err); @@ -511,7 +502,7 @@ static noinline int v4l1_compat_set_win_cap_dimensions( fmt->fmt.win.chromakey = win->chromakey; fmt->fmt.win.clips = (void __user *)win->clips; fmt->fmt.win.clipcount = win->clipcount; - err2 = drv(inode, file, VIDIOC_S_FMT, fmt); + err2 = drv(file, VIDIOC_S_FMT, fmt); if (err2 < 0) dprintk("VIDIOCSWIN / VIDIOC_S_FMT #2: %d\n", err2); @@ -525,7 +516,6 @@ static noinline int v4l1_compat_set_win_cap_dimensions( static noinline int v4l1_compat_turn_preview_on_off( int *on, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -536,9 +526,9 @@ static noinline int v4l1_compat_turn_preview_on_off( /* dirty hack time. But v4l1 has no STREAMOFF * equivalent in the API, and this one at * least comes close ... */ - drv(inode, file, VIDIOC_STREAMOFF, &captype); + drv(file, VIDIOC_STREAMOFF, &captype); } - err = drv(inode, file, VIDIOC_OVERLAY, on); + err = drv(file, VIDIOC_OVERLAY, on); if (err < 0) dprintk("VIDIOCCAPTURE / VIDIOC_PREVIEW: %d\n", err); return err; @@ -546,7 +536,6 @@ static noinline int v4l1_compat_turn_preview_on_off( static noinline int v4l1_compat_get_input_info( struct video_channel *chan, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -556,7 +545,7 @@ static noinline int v4l1_compat_get_input_info( memset(&input2, 0, sizeof(input2)); input2.index = chan->channel; - err = drv(inode, file, VIDIOC_ENUMINPUT, &input2); + err = drv(file, VIDIOC_ENUMINPUT, &input2); if (err < 0) { dprintk("VIDIOCGCHAN / VIDIOC_ENUMINPUT: " "channel=%d err=%d\n", chan->channel, err); @@ -578,7 +567,7 @@ static noinline int v4l1_compat_get_input_info( break; } chan->norm = 0; - err = drv(inode, file, VIDIOC_G_STD, &sid); + err = drv(file, VIDIOC_G_STD, &sid); if (err < 0) dprintk("VIDIOCGCHAN / VIDIOC_G_STD: %d\n", err); if (err == 0) { @@ -595,14 +584,13 @@ done: static noinline int v4l1_compat_set_input( struct video_channel *chan, - struct inode *inode, struct file *file, v4l2_kioctl drv) { int err; v4l2_std_id sid = 0; - err = drv(inode, file, VIDIOC_S_INPUT, &chan->channel); + err = drv(file, VIDIOC_S_INPUT, &chan->channel); if (err < 0) dprintk("VIDIOCSCHAN / VIDIOC_S_INPUT: %d\n", err); switch (chan->norm) { @@ -617,7 +605,7 @@ static noinline int v4l1_compat_set_input( break; } if (0 != sid) { - err = drv(inode, file, VIDIOC_S_STD, &sid); + err = drv(file, VIDIOC_S_STD, &sid); if (err < 0) dprintk("VIDIOCSCHAN / VIDIOC_S_STD: %d\n", err); } @@ -626,7 +614,6 @@ static noinline int v4l1_compat_set_input( static noinline int v4l1_compat_get_picture( struct video_picture *pict, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -639,19 +626,19 @@ static noinline int v4l1_compat_get_picture( return err; } - pict->brightness = get_v4l_control(inode, file, + pict->brightness = get_v4l_control(file, V4L2_CID_BRIGHTNESS, drv); - pict->hue = get_v4l_control(inode, file, + pict->hue = get_v4l_control(file, V4L2_CID_HUE, drv); - pict->contrast = get_v4l_control(inode, file, + pict->contrast = get_v4l_control(file, V4L2_CID_CONTRAST, drv); - pict->colour = get_v4l_control(inode, file, + pict->colour = get_v4l_control(file, V4L2_CID_SATURATION, drv); - pict->whiteness = get_v4l_control(inode, file, + pict->whiteness = get_v4l_control(file, V4L2_CID_WHITENESS, drv); fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - err = drv(inode, file, VIDIOC_G_FMT, fmt); + err = drv(file, VIDIOC_G_FMT, fmt); if (err < 0) { dprintk("VIDIOCGPICT / VIDIOC_G_FMT: %d\n", err); goto done; @@ -669,7 +656,6 @@ done: static noinline int v4l1_compat_set_picture( struct video_picture *pict, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -685,15 +671,15 @@ static noinline int v4l1_compat_set_picture( } memset(&fbuf, 0, sizeof(fbuf)); - set_v4l_control(inode, file, + set_v4l_control(file, V4L2_CID_BRIGHTNESS, pict->brightness, drv); - set_v4l_control(inode, file, + set_v4l_control(file, V4L2_CID_HUE, pict->hue, drv); - set_v4l_control(inode, file, + set_v4l_control(file, V4L2_CID_CONTRAST, pict->contrast, drv); - set_v4l_control(inode, file, + set_v4l_control(file, V4L2_CID_SATURATION, pict->colour, drv); - set_v4l_control(inode, file, + set_v4l_control(file, V4L2_CID_WHITENESS, pict->whiteness, drv); /* * V4L1 uses this ioctl to set both memory capture and overlay @@ -703,7 +689,7 @@ static noinline int v4l1_compat_set_picture( */ fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - err = drv(inode, file, VIDIOC_G_FMT, fmt); + err = drv(file, VIDIOC_G_FMT, fmt); /* If VIDIOC_G_FMT failed, then the driver likely doesn't support memory capture. Trying to set the memory capture parameters would be pointless. */ @@ -714,13 +700,13 @@ static noinline int v4l1_compat_set_picture( palette_to_pixelformat(pict->palette)) { fmt->fmt.pix.pixelformat = palette_to_pixelformat( pict->palette); - mem_err = drv(inode, file, VIDIOC_S_FMT, fmt); + mem_err = drv(file, VIDIOC_S_FMT, fmt); if (mem_err < 0) dprintk("VIDIOCSPICT / VIDIOC_S_FMT: %d\n", mem_err); } - err = drv(inode, file, VIDIOC_G_FBUF, &fbuf); + err = drv(file, VIDIOC_G_FBUF, &fbuf); /* If VIDIOC_G_FBUF failed, then the driver likely doesn't support overlay. Trying to set the overlay parameters would be quite pointless. */ @@ -731,7 +717,7 @@ static noinline int v4l1_compat_set_picture( palette_to_pixelformat(pict->palette)) { fbuf.fmt.pixelformat = palette_to_pixelformat( pict->palette); - ovl_err = drv(inode, file, VIDIOC_S_FBUF, &fbuf); + ovl_err = drv(file, VIDIOC_S_FBUF, &fbuf); if (ovl_err < 0) dprintk("VIDIOCSPICT / VIDIOC_S_FBUF: %d\n", ovl_err); @@ -752,7 +738,6 @@ static noinline int v4l1_compat_set_picture( static noinline int v4l1_compat_get_tuner( struct video_tuner *tun, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -762,7 +747,7 @@ static noinline int v4l1_compat_get_tuner( v4l2_std_id sid; memset(&tun2, 0, sizeof(tun2)); - err = drv(inode, file, VIDIOC_G_TUNER, &tun2); + err = drv(file, VIDIOC_G_TUNER, &tun2); if (err < 0) { dprintk("VIDIOCGTUNER / VIDIOC_G_TUNER: %d\n", err); goto done; @@ -778,7 +763,7 @@ static noinline int v4l1_compat_get_tuner( for (i = 0; i < 64; i++) { memset(&std2, 0, sizeof(std2)); std2.index = i; - if (0 != drv(inode, file, VIDIOC_ENUMSTD, &std2)) + if (0 != drv(file, VIDIOC_ENUMSTD, &std2)) break; if (std2.id & V4L2_STD_PAL) tun->flags |= VIDEO_TUNER_PAL; @@ -788,7 +773,7 @@ static noinline int v4l1_compat_get_tuner( tun->flags |= VIDEO_TUNER_SECAM; } - err = drv(inode, file, VIDIOC_G_STD, &sid); + err = drv(file, VIDIOC_G_STD, &sid); if (err < 0) dprintk("VIDIOCGTUNER / VIDIOC_G_STD: %d\n", err); if (err == 0) { @@ -811,7 +796,6 @@ done: static noinline int v4l1_compat_select_tuner( struct video_tuner *tun, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -821,7 +805,7 @@ static noinline int v4l1_compat_select_tuner( t.index = tun->tuner; - err = drv(inode, file, VIDIOC_S_INPUT, &t); + err = drv(file, VIDIOC_S_INPUT, &t); if (err < 0) dprintk("VIDIOCSTUNER / VIDIOC_S_INPUT: %d\n", err); return err; @@ -829,7 +813,6 @@ static noinline int v4l1_compat_select_tuner( static noinline int v4l1_compat_get_frequency( unsigned long *freq, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -838,7 +821,7 @@ static noinline int v4l1_compat_get_frequency( memset(&freq2, 0, sizeof(freq2)); freq2.tuner = 0; - err = drv(inode, file, VIDIOC_G_FREQUENCY, &freq2); + err = drv(file, VIDIOC_G_FREQUENCY, &freq2); if (err < 0) dprintk("VIDIOCGFREQ / VIDIOC_G_FREQUENCY: %d\n", err); if (0 == err) @@ -848,7 +831,6 @@ static noinline int v4l1_compat_get_frequency( static noinline int v4l1_compat_set_frequency( unsigned long *freq, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -856,9 +838,9 @@ static noinline int v4l1_compat_set_frequency( struct v4l2_frequency freq2; memset(&freq2, 0, sizeof(freq2)); - drv(inode, file, VIDIOC_G_FREQUENCY, &freq2); + drv(file, VIDIOC_G_FREQUENCY, &freq2); freq2.frequency = *freq; - err = drv(inode, file, VIDIOC_S_FREQUENCY, &freq2); + err = drv(file, VIDIOC_S_FREQUENCY, &freq2); if (err < 0) dprintk("VIDIOCSFREQ / VIDIOC_S_FREQUENCY: %d\n", err); return err; @@ -866,7 +848,6 @@ static noinline int v4l1_compat_set_frequency( static noinline int v4l1_compat_get_audio( struct video_audio *aud, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -876,7 +857,7 @@ static noinline int v4l1_compat_get_audio( struct v4l2_tuner tun2; memset(&aud2, 0, sizeof(aud2)); - err = drv(inode, file, VIDIOC_G_AUDIO, &aud2); + err = drv(file, VIDIOC_G_AUDIO, &aud2); if (err < 0) { dprintk("VIDIOCGAUDIO / VIDIOC_G_AUDIO: %d\n", err); goto done; @@ -886,27 +867,27 @@ static noinline int v4l1_compat_get_audio( aud->name[sizeof(aud->name) - 1] = 0; aud->audio = aud2.index; aud->flags = 0; - i = get_v4l_control(inode, file, V4L2_CID_AUDIO_VOLUME, drv); + i = get_v4l_control(file, V4L2_CID_AUDIO_VOLUME, drv); if (i >= 0) { aud->volume = i; aud->flags |= VIDEO_AUDIO_VOLUME; } - i = get_v4l_control(inode, file, V4L2_CID_AUDIO_BASS, drv); + i = get_v4l_control(file, V4L2_CID_AUDIO_BASS, drv); if (i >= 0) { aud->bass = i; aud->flags |= VIDEO_AUDIO_BASS; } - i = get_v4l_control(inode, file, V4L2_CID_AUDIO_TREBLE, drv); + i = get_v4l_control(file, V4L2_CID_AUDIO_TREBLE, drv); if (i >= 0) { aud->treble = i; aud->flags |= VIDEO_AUDIO_TREBLE; } - i = get_v4l_control(inode, file, V4L2_CID_AUDIO_BALANCE, drv); + i = get_v4l_control(file, V4L2_CID_AUDIO_BALANCE, drv); if (i >= 0) { aud->balance = i; aud->flags |= VIDEO_AUDIO_BALANCE; } - i = get_v4l_control(inode, file, V4L2_CID_AUDIO_MUTE, drv); + i = get_v4l_control(file, V4L2_CID_AUDIO_MUTE, drv); if (i >= 0) { if (i) aud->flags |= VIDEO_AUDIO_MUTE; @@ -914,13 +895,13 @@ static noinline int v4l1_compat_get_audio( } aud->step = 1; qctrl2.id = V4L2_CID_AUDIO_VOLUME; - if (drv(inode, file, VIDIOC_QUERYCTRL, &qctrl2) == 0 && + if (drv(file, VIDIOC_QUERYCTRL, &qctrl2) == 0 && !(qctrl2.flags & V4L2_CTRL_FLAG_DISABLED)) aud->step = qctrl2.step; aud->mode = 0; memset(&tun2, 0, sizeof(tun2)); - err = drv(inode, file, VIDIOC_G_TUNER, &tun2); + err = drv(file, VIDIOC_G_TUNER, &tun2); if (err < 0) { dprintk("VIDIOCGAUDIO / VIDIOC_G_TUNER: %d\n", err); err = 0; @@ -939,7 +920,6 @@ done: static noinline int v4l1_compat_set_audio( struct video_audio *aud, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -951,24 +931,24 @@ static noinline int v4l1_compat_set_audio( memset(&tun2, 0, sizeof(tun2)); aud2.index = aud->audio; - err = drv(inode, file, VIDIOC_S_AUDIO, &aud2); + err = drv(file, VIDIOC_S_AUDIO, &aud2); if (err < 0) { dprintk("VIDIOCSAUDIO / VIDIOC_S_AUDIO: %d\n", err); goto done; } - set_v4l_control(inode, file, V4L2_CID_AUDIO_VOLUME, + set_v4l_control(file, V4L2_CID_AUDIO_VOLUME, aud->volume, drv); - set_v4l_control(inode, file, V4L2_CID_AUDIO_BASS, + set_v4l_control(file, V4L2_CID_AUDIO_BASS, aud->bass, drv); - set_v4l_control(inode, file, V4L2_CID_AUDIO_TREBLE, + set_v4l_control(file, V4L2_CID_AUDIO_TREBLE, aud->treble, drv); - set_v4l_control(inode, file, V4L2_CID_AUDIO_BALANCE, + set_v4l_control(file, V4L2_CID_AUDIO_BALANCE, aud->balance, drv); - set_v4l_control(inode, file, V4L2_CID_AUDIO_MUTE, + set_v4l_control(file, V4L2_CID_AUDIO_MUTE, !!(aud->flags & VIDEO_AUDIO_MUTE), drv); - err = drv(inode, file, VIDIOC_G_TUNER, &tun2); + err = drv(file, VIDIOC_G_TUNER, &tun2); if (err < 0) dprintk("VIDIOCSAUDIO / VIDIOC_G_TUNER: %d\n", err); if (err == 0) { @@ -985,7 +965,7 @@ static noinline int v4l1_compat_set_audio( tun2.audmode = V4L2_TUNER_MODE_LANG2; break; } - err = drv(inode, file, VIDIOC_S_TUNER, &tun2); + err = drv(file, VIDIOC_S_TUNER, &tun2); if (err < 0) dprintk("VIDIOCSAUDIO / VIDIOC_S_TUNER: %d\n", err); } @@ -996,7 +976,6 @@ done: static noinline int v4l1_compat_capture_frame( struct video_mmap *mm, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -1013,7 +992,7 @@ static noinline int v4l1_compat_capture_frame( memset(&buf, 0, sizeof(buf)); fmt->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - err = drv(inode, file, VIDIOC_G_FMT, fmt); + err = drv(file, VIDIOC_G_FMT, fmt); if (err < 0) { dprintk("VIDIOCMCAPTURE / VIDIOC_G_FMT: %d\n", err); goto done; @@ -1029,7 +1008,7 @@ static noinline int v4l1_compat_capture_frame( palette_to_pixelformat(mm->format); fmt->fmt.pix.field = V4L2_FIELD_ANY; fmt->fmt.pix.bytesperline = 0; - err = drv(inode, file, VIDIOC_S_FMT, fmt); + err = drv(file, VIDIOC_S_FMT, fmt); if (err < 0) { dprintk("VIDIOCMCAPTURE / VIDIOC_S_FMT: %d\n", err); goto done; @@ -1037,17 +1016,17 @@ static noinline int v4l1_compat_capture_frame( } buf.index = mm->frame; buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - err = drv(inode, file, VIDIOC_QUERYBUF, &buf); + err = drv(file, VIDIOC_QUERYBUF, &buf); if (err < 0) { dprintk("VIDIOCMCAPTURE / VIDIOC_QUERYBUF: %d\n", err); goto done; } - err = drv(inode, file, VIDIOC_QBUF, &buf); + err = drv(file, VIDIOC_QBUF, &buf); if (err < 0) { dprintk("VIDIOCMCAPTURE / VIDIOC_QBUF: %d\n", err); goto done; } - err = drv(inode, file, VIDIOC_STREAMON, &captype); + err = drv(file, VIDIOC_STREAMON, &captype); if (err < 0) dprintk("VIDIOCMCAPTURE / VIDIOC_STREAMON: %d\n", err); done: @@ -1057,7 +1036,6 @@ done: static noinline int v4l1_compat_sync( int *i, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -1069,7 +1047,7 @@ static noinline int v4l1_compat_sync( memset(&buf, 0, sizeof(buf)); buf.index = *i; buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; - err = drv(inode, file, VIDIOC_QUERYBUF, &buf); + err = drv(file, VIDIOC_QUERYBUF, &buf); if (err < 0) { /* No such buffer */ dprintk("VIDIOCSYNC / VIDIOC_QUERYBUF: %d\n", err); @@ -1082,7 +1060,7 @@ static noinline int v4l1_compat_sync( } /* make sure capture actually runs so we don't block forever */ - err = drv(inode, file, VIDIOC_STREAMON, &captype); + err = drv(file, VIDIOC_STREAMON, &captype); if (err < 0) { dprintk("VIDIOCSYNC / VIDIOC_STREAMON: %d\n", err); goto done; @@ -1096,7 +1074,7 @@ static noinline int v4l1_compat_sync( if (err < 0 || /* error or sleep was interrupted */ err == 0) /* timeout? Shouldn't occur. */ break; - err = drv(inode, file, VIDIOC_QUERYBUF, &buf); + err = drv(file, VIDIOC_QUERYBUF, &buf); if (err < 0) dprintk("VIDIOCSYNC / VIDIOC_QUERYBUF: %d\n", err); } @@ -1104,7 +1082,7 @@ static noinline int v4l1_compat_sync( if (!(buf.flags & V4L2_BUF_FLAG_DONE)) /* not done */ goto done; do { - err = drv(inode, file, VIDIOC_DQBUF, &buf); + err = drv(file, VIDIOC_DQBUF, &buf); if (err < 0) dprintk("VIDIOCSYNC / VIDIOC_DQBUF: %d\n", err); } while (err == 0 && buf.index != *i); @@ -1114,7 +1092,6 @@ done: static noinline int v4l1_compat_get_vbi_format( struct vbi_format *fmt, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -1128,7 +1105,7 @@ static noinline int v4l1_compat_get_vbi_format( } fmt2->type = V4L2_BUF_TYPE_VBI_CAPTURE; - err = drv(inode, file, VIDIOC_G_FMT, fmt2); + err = drv(file, VIDIOC_G_FMT, fmt2); if (err < 0) { dprintk("VIDIOCGVBIFMT / VIDIOC_G_FMT: %d\n", err); goto done; @@ -1153,7 +1130,6 @@ done: static noinline int v4l1_compat_set_vbi_format( struct vbi_format *fmt, - struct inode *inode, struct file *file, v4l2_kioctl drv) { @@ -1179,7 +1155,7 @@ static noinline int v4l1_compat_set_vbi_format( fmt2->fmt.vbi.start[1] = fmt->start[1]; fmt2->fmt.vbi.count[1] = fmt->count[1]; fmt2->fmt.vbi.flags = fmt->flags; - err = drv(inode, file, VIDIOC_TRY_FMT, fmt2); + err = drv(file, VIDIOC_TRY_FMT, fmt2); if (err < 0) { dprintk("VIDIOCSVBIFMT / VIDIOC_TRY_FMT: %d\n", err); goto done; @@ -1196,7 +1172,7 @@ static noinline int v4l1_compat_set_vbi_format( err = -EINVAL; goto done; } - err = drv(inode, file, VIDIOC_S_FMT, fmt2); + err = drv(file, VIDIOC_S_FMT, fmt2); if (err < 0) dprintk("VIDIOCSVBIFMT / VIDIOC_S_FMT: %d\n", err); done: @@ -1208,8 +1184,7 @@ done: * This function is exported. */ int -v4l_compat_translate_ioctl(struct inode *inode, - struct file *file, +v4l_compat_translate_ioctl(struct file *file, int cmd, void *arg, v4l2_kioctl drv) @@ -1218,64 +1193,64 @@ v4l_compat_translate_ioctl(struct inode *inode, switch (cmd) { case VIDIOCGCAP: /* capability */ - err = v4l1_compat_get_capabilities(arg, inode, file, drv); + err = v4l1_compat_get_capabilities(arg, file, drv); break; case VIDIOCGFBUF: /* get frame buffer */ - err = v4l1_compat_get_frame_buffer(arg, inode, file, drv); + err = v4l1_compat_get_frame_buffer(arg, file, drv); break; case VIDIOCSFBUF: /* set frame buffer */ - err = v4l1_compat_set_frame_buffer(arg, inode, file, drv); + err = v4l1_compat_set_frame_buffer(arg, file, drv); break; case VIDIOCGWIN: /* get window or capture dimensions */ - err = v4l1_compat_get_win_cap_dimensions(arg, inode, file, drv); + err = v4l1_compat_get_win_cap_dimensions(arg, file, drv); break; case VIDIOCSWIN: /* set window and/or capture dimensions */ - err = v4l1_compat_set_win_cap_dimensions(arg, inode, file, drv); + err = v4l1_compat_set_win_cap_dimensions(arg, file, drv); break; case VIDIOCCAPTURE: /* turn on/off preview */ - err = v4l1_compat_turn_preview_on_off(arg, inode, file, drv); + err = v4l1_compat_turn_preview_on_off(arg, file, drv); break; case VIDIOCGCHAN: /* get input information */ - err = v4l1_compat_get_input_info(arg, inode, file, drv); + err = v4l1_compat_get_input_info(arg, file, drv); break; case VIDIOCSCHAN: /* set input */ - err = v4l1_compat_set_input(arg, inode, file, drv); + err = v4l1_compat_set_input(arg, file, drv); break; case VIDIOCGPICT: /* get tone controls & partial capture format */ - err = v4l1_compat_get_picture(arg, inode, file, drv); + err = v4l1_compat_get_picture(arg, file, drv); break; case VIDIOCSPICT: /* set tone controls & partial capture format */ - err = v4l1_compat_set_picture(arg, inode, file, drv); + err = v4l1_compat_set_picture(arg, file, drv); break; case VIDIOCGTUNER: /* get tuner information */ - err = v4l1_compat_get_tuner(arg, inode, file, drv); + err = v4l1_compat_get_tuner(arg, file, drv); break; case VIDIOCSTUNER: /* select a tuner input */ - err = v4l1_compat_select_tuner(arg, inode, file, drv); + err = v4l1_compat_select_tuner(arg, file, drv); break; case VIDIOCGFREQ: /* get frequency */ - err = v4l1_compat_get_frequency(arg, inode, file, drv); + err = v4l1_compat_get_frequency(arg, file, drv); break; case VIDIOCSFREQ: /* set frequency */ - err = v4l1_compat_set_frequency(arg, inode, file, drv); + err = v4l1_compat_set_frequency(arg, file, drv); break; case VIDIOCGAUDIO: /* get audio properties/controls */ - err = v4l1_compat_get_audio(arg, inode, file, drv); + err = v4l1_compat_get_audio(arg, file, drv); break; case VIDIOCSAUDIO: /* set audio controls */ - err = v4l1_compat_set_audio(arg, inode, file, drv); + err = v4l1_compat_set_audio(arg, file, drv); break; case VIDIOCMCAPTURE: /* capture a frame */ - err = v4l1_compat_capture_frame(arg, inode, file, drv); + err = v4l1_compat_capture_frame(arg, file, drv); break; case VIDIOCSYNC: /* wait for a frame */ - err = v4l1_compat_sync(arg, inode, file, drv); + err = v4l1_compat_sync(arg, file, drv); break; case VIDIOCGVBIFMT: /* query VBI data capture format */ - err = v4l1_compat_get_vbi_format(arg, inode, file, drv); + err = v4l1_compat_get_vbi_format(arg, file, drv); break; case VIDIOCSVBIFMT: - err = v4l1_compat_set_vbi_format(arg, inode, file, drv); + err = v4l1_compat_set_vbi_format(arg, file, drv); break; default: err = -ENOIOCTLCMD; diff --git a/drivers/media/video/v4l2-int-device.c b/drivers/media/video/v4l2-int-device.c index 0e4549922f26..a935bae538ef 100644 --- a/drivers/media/video/v4l2-int-device.c +++ b/drivers/media/video/v4l2-int-device.c @@ -32,7 +32,7 @@ static DEFINE_MUTEX(mutex); static LIST_HEAD(int_list); -static void v4l2_int_device_try_attach_all(void) +void v4l2_int_device_try_attach_all(void) { struct v4l2_int_device *m, *s; @@ -66,6 +66,7 @@ static void v4l2_int_device_try_attach_all(void) } } } +EXPORT_SYMBOL_GPL(v4l2_int_device_try_attach_all); static int ioctl_sort_cmp(const void *a, const void *b) { @@ -144,6 +145,7 @@ int v4l2_int_ioctl_0(struct v4l2_int_device *d, int cmd) find_ioctl(d->u.slave, cmd, (v4l2_int_ioctl_func *)no_such_ioctl_0))(d); } +EXPORT_SYMBOL_GPL(v4l2_int_ioctl_0); static int no_such_ioctl_1(struct v4l2_int_device *d, void *arg) { @@ -156,5 +158,6 @@ int v4l2_int_ioctl_1(struct v4l2_int_device *d, int cmd, void *arg) find_ioctl(d->u.slave, cmd, (v4l2_int_ioctl_func *)no_such_ioctl_1))(d, arg); } +EXPORT_SYMBOL_GPL(v4l2_int_ioctl_1); MODULE_LICENSE("GPL"); diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c index 155c9d77a463..710e1a40c422 100644 --- a/drivers/media/video/v4l2-ioctl.c +++ b/drivers/media/video/v4l2-ioctl.c @@ -625,13 +625,13 @@ static int check_fmt(const struct v4l2_ioctl_ops *ops, enum v4l2_buf_type type) return -EINVAL; } -static int __video_do_ioctl(struct inode *inode, struct file *file, +static int __video_do_ioctl(struct file *file, unsigned int cmd, void *arg) { struct video_device *vfd = video_devdata(file); const struct v4l2_ioctl_ops *ops = vfd->ioctl_ops; - void *fh = file->private_data; - int ret = -EINVAL; + void *fh = file->private_data; + int ret = -EINVAL; if ((vfd->debug & V4L2_DEBUG_IOCTL) && !(vfd->debug & V4L2_DEBUG_IOCTL_ARG)) { @@ -675,7 +675,7 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, V4L2 ioctls. ********************************************************/ if (_IOC_TYPE(cmd) == 'v' && _IOC_NR(cmd) < BASE_VIDIOCPRIVATE) - return v4l_compat_translate_ioctl(inode, file, cmd, arg, + return v4l_compat_translate_ioctl(file, cmd, arg, __video_do_ioctl); #endif @@ -1768,7 +1768,7 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, return ret; } -int video_ioctl2(struct inode *inode, struct file *file, +int __video_ioctl2(struct file *file, unsigned int cmd, unsigned long arg) { char sbuf[128]; @@ -1832,7 +1832,7 @@ int video_ioctl2(struct inode *inode, struct file *file, } /* Handles IOCTL */ - err = __video_do_ioctl(inode, file, cmd, parg); + err = __video_do_ioctl(file, cmd, parg); if (err == -ENOIOCTLCMD) err = -EINVAL; if (is_ext_ctrl) { @@ -1860,4 +1860,11 @@ out: kfree(mbuf); return err; } +EXPORT_SYMBOL(__video_ioctl2); + +int video_ioctl2(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + return __video_ioctl2(file, cmd, arg); +} EXPORT_SYMBOL(video_ioctl2); diff --git a/drivers/media/video/videobuf-dvb.c b/drivers/media/video/videobuf-dvb.c index 917277d36605..0e7dcba8e4ae 100644 --- a/drivers/media/video/videobuf-dvb.c +++ b/drivers/media/video/videobuf-dvb.c @@ -296,29 +296,7 @@ EXPORT_SYMBOL(videobuf_dvb_register_bus); void videobuf_dvb_unregister_bus(struct videobuf_dvb_frontends *f) { - struct list_head *list, *q; - struct videobuf_dvb_frontend *fe; - - mutex_lock(&f->lock); - list_for_each_safe(list, q, &f->felist) { - fe = list_entry(list, struct videobuf_dvb_frontend, felist); - if (fe->dvb.net.dvbdev) { - dvb_net_release(&fe->dvb.net); - fe->dvb.demux.dmx.remove_frontend(&fe->dvb.demux.dmx, - &fe->dvb.fe_mem); - fe->dvb.demux.dmx.remove_frontend(&fe->dvb.demux.dmx, - &fe->dvb.fe_hw); - dvb_dmxdev_release(&fe->dvb.dmxdev); - dvb_dmx_release(&fe->dvb.demux); - dvb_unregister_frontend(fe->dvb.frontend); - } - if (fe->dvb.frontend) - /* always allocated, may have been reset */ - dvb_frontend_detach(fe->dvb.frontend); - list_del(list); - kfree(fe); - } - mutex_unlock(&f->lock); + videobuf_dvb_dealloc_frontends(f); dvb_unregister_adapter(&f->adapter); } @@ -389,3 +367,31 @@ fail_alloc: return fe; } EXPORT_SYMBOL(videobuf_dvb_alloc_frontend); + +void videobuf_dvb_dealloc_frontends(struct videobuf_dvb_frontends *f) +{ + struct list_head *list, *q; + struct videobuf_dvb_frontend *fe; + + mutex_lock(&f->lock); + list_for_each_safe(list, q, &f->felist) { + fe = list_entry(list, struct videobuf_dvb_frontend, felist); + if (fe->dvb.net.dvbdev) { + dvb_net_release(&fe->dvb.net); + fe->dvb.demux.dmx.remove_frontend(&fe->dvb.demux.dmx, + &fe->dvb.fe_mem); + fe->dvb.demux.dmx.remove_frontend(&fe->dvb.demux.dmx, + &fe->dvb.fe_hw); + dvb_dmxdev_release(&fe->dvb.dmxdev); + dvb_dmx_release(&fe->dvb.demux); + dvb_unregister_frontend(fe->dvb.frontend); + } + if (fe->dvb.frontend) + /* always allocated, may have been reset */ + dvb_frontend_detach(fe->dvb.frontend); + list_del(list); /* remove list entry */ + kfree(fe); /* free frontend allocation */ + } + mutex_unlock(&f->lock); +} +EXPORT_SYMBOL(videobuf_dvb_dealloc_frontends); diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 7d7e51def461..e15e48f04be7 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -1163,11 +1163,11 @@ static int vivi_release(void) if (-1 != dev->vfd->minor) { printk(KERN_INFO "%s: unregistering /dev/video%d\n", - VIVI_MODULE_NAME, dev->vfd->minor); + VIVI_MODULE_NAME, dev->vfd->num); video_unregister_device(dev->vfd); } else { printk(KERN_INFO "%s: releasing /dev/video%d\n", - VIVI_MODULE_NAME, dev->vfd->minor); + VIVI_MODULE_NAME, dev->vfd->num); video_device_release(dev->vfd); } @@ -1307,7 +1307,7 @@ static int __init vivi_init(void) dev->vfd = vfd; printk(KERN_INFO "%s: V4L2 device registered as /dev/video%d\n", - VIVI_MODULE_NAME, vfd->minor); + VIVI_MODULE_NAME, vfd->num); } if (ret < 0) { diff --git a/drivers/media/video/w9968cf.c b/drivers/media/video/w9968cf.c index dcd45dbd82dc..4dfb43bd1846 100644 --- a/drivers/media/video/w9968cf.c +++ b/drivers/media/video/w9968cf.c @@ -2398,7 +2398,7 @@ error: cam->sensor = CC_UNKNOWN; DBG(1, "Image sensor initialization failed for %s (/dev/video%d). " "Try to detach and attach this device again", - symbolic(camlist, cam->id), cam->v4ldev->minor) + symbolic(camlist, cam->id), cam->v4ldev->num) return err; } @@ -2644,7 +2644,7 @@ static void w9968cf_release_resources(struct w9968cf_device* cam) { mutex_lock(&w9968cf_devlist_mutex); - DBG(2, "V4L device deregistered: /dev/video%d", cam->v4ldev->minor) + DBG(2, "V4L device deregistered: /dev/video%d", cam->v4ldev->num) video_unregister_device(cam->v4ldev); list_del(&cam->v4llist); @@ -2679,7 +2679,7 @@ static int w9968cf_open(struct inode* inode, struct file* filp) DBG(2, "No supported image sensor has been detected by the " "'ovcamchip' module for the %s (/dev/video%d). Make " "sure it is loaded *before* (re)connecting the camera.", - symbolic(camlist, cam->id), cam->v4ldev->minor) + symbolic(camlist, cam->id), cam->v4ldev->num) mutex_unlock(&cam->dev_mutex); up_read(&w9968cf_disconnect); return -ENODEV; @@ -2687,7 +2687,7 @@ static int w9968cf_open(struct inode* inode, struct file* filp) if (cam->users) { DBG(2, "%s (/dev/video%d) has been already occupied by '%s'", - symbolic(camlist, cam->id),cam->v4ldev->minor,cam->command) + symbolic(camlist, cam->id), cam->v4ldev->num, cam->command) if ((filp->f_flags & O_NONBLOCK)||(filp->f_flags & O_NDELAY)) { mutex_unlock(&cam->dev_mutex); up_read(&w9968cf_disconnect); @@ -2709,7 +2709,7 @@ static int w9968cf_open(struct inode* inode, struct file* filp) } DBG(5, "Opening '%s', /dev/video%d ...", - symbolic(camlist, cam->id), cam->v4ldev->minor) + symbolic(camlist, cam->id), cam->v4ldev->num) cam->streaming = 0; cam->misconfigured = 0; @@ -2947,7 +2947,7 @@ static int w9968cf_v4l_ioctl(struct inode* inode, struct file* filp, .minheight = cam->minheight, }; sprintf(cap.name, "W996[87]CF USB Camera #%d", - cam->v4ldev->minor); + cam->v4ldev->num); cap.maxwidth = (cam->upscaling && w9968cf_vpp) ? max((u16)W9968CF_MAX_WIDTH, cam->maxwidth) : cam->maxwidth; @@ -3567,7 +3567,7 @@ w9968cf_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) goto fail; } - DBG(2, "V4L device registered as /dev/video%d", cam->v4ldev->minor) + DBG(2, "V4L device registered as /dev/video%d", cam->v4ldev->num) /* Set some basic constants */ w9968cf_configure_camera(cam, udev, mod_id, dev_nr); @@ -3618,7 +3618,7 @@ static void w9968cf_usb_disconnect(struct usb_interface* intf) DBG(2, "The device is open (/dev/video%d)! " "Process name: %s. Deregistration and memory " "deallocation are deferred on close.", - cam->v4ldev->minor, cam->command) + cam->v4ldev->num, cam->command) cam->misconfigured = 1; w9968cf_stop_transfer(cam); wake_up_interruptible(&cam->wait_queue); diff --git a/drivers/media/video/zc0301/zc0301_core.c b/drivers/media/video/zc0301/zc0301_core.c index 6a0902bcba6b..9fc581707638 100644 --- a/drivers/media/video/zc0301/zc0301_core.c +++ b/drivers/media/video/zc0301/zc0301_core.c @@ -539,7 +539,7 @@ static int zc0301_stream_interrupt(struct zc0301_device* cam) cam->state |= DEV_MISCONFIGURED; DBG(1, "URB timeout reached. The camera is misconfigured. To " "use it, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -EIO; } @@ -640,7 +640,7 @@ static void zc0301_release_resources(struct kref *kref) { struct zc0301_device *cam = container_of(kref, struct zc0301_device, kref); - DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->minor); + DBG(2, "V4L2 device /dev/video%d deregistered", cam->v4ldev->num); video_set_drvdata(cam->v4ldev, NULL); video_unregister_device(cam->v4ldev); usb_put_dev(cam->usbdev); @@ -679,7 +679,7 @@ static int zc0301_open(struct inode* inode, struct file* filp) } if (cam->users) { - DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->minor); + DBG(2, "Device /dev/video%d is busy...", cam->v4ldev->num); DBG(3, "Simultaneous opens are not supported"); if ((filp->f_flags & O_NONBLOCK) || (filp->f_flags & O_NDELAY)) { @@ -722,7 +722,7 @@ static int zc0301_open(struct inode* inode, struct file* filp) cam->frame_count = 0; zc0301_empty_framequeues(cam); - DBG(3, "Video device /dev/video%d is open", cam->v4ldev->minor); + DBG(3, "Video device /dev/video%d is open", cam->v4ldev->num); out: mutex_unlock(&cam->open_mutex); @@ -746,7 +746,7 @@ static int zc0301_release(struct inode* inode, struct file* filp) cam->users--; wake_up_interruptible_nr(&cam->wait_open, 1); - DBG(3, "Video device /dev/video%d closed", cam->v4ldev->minor); + DBG(3, "Video device /dev/video%d closed", cam->v4ldev->num); kref_put(&cam->kref, zc0301_release_resources); @@ -1275,7 +1275,7 @@ zc0301_vidioc_s_crop(struct zc0301_device* cam, void __user * arg) cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_CROP failed because of hardware problems. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -EIO; } @@ -1288,7 +1288,7 @@ zc0301_vidioc_s_crop(struct zc0301_device* cam, void __user * arg) cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_CROP failed because of not enough memory. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -ENOMEM; } @@ -1470,7 +1470,7 @@ zc0301_vidioc_try_s_fmt(struct zc0301_device* cam, unsigned int cmd, cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_FMT failed because of hardware problems. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -EIO; } @@ -1482,7 +1482,7 @@ zc0301_vidioc_try_s_fmt(struct zc0301_device* cam, unsigned int cmd, cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_FMT failed because of not enough memory. To " "use the camera, close and open /dev/video%d again.", - cam->v4ldev->minor); + cam->v4ldev->num); return -ENOMEM; } @@ -1529,7 +1529,7 @@ zc0301_vidioc_s_jpegcomp(struct zc0301_device* cam, void __user * arg) cam->state |= DEV_MISCONFIGURED; DBG(1, "VIDIOC_S_JPEGCOMP failed because of hardware " "problems. To use the camera, close and open " - "/dev/video%d again.", cam->v4ldev->minor); + "/dev/video%d again.", cam->v4ldev->num); return -EIO; } @@ -2005,7 +2005,7 @@ zc0301_usb_probe(struct usb_interface* intf, const struct usb_device_id* id) goto fail; } - DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->minor); + DBG(2, "V4L2 device registered as /dev/video%d", cam->v4ldev->num); cam->module_param.force_munmap = force_munmap[dev_nr]; cam->module_param.frame_timeout = frame_timeout[dev_nr]; @@ -2044,7 +2044,7 @@ static void zc0301_usb_disconnect(struct usb_interface* intf) if (cam->users) { DBG(2, "Device /dev/video%d is open! Deregistration and " "memory deallocation are deferred.", - cam->v4ldev->minor); + cam->v4ldev->num); cam->state |= DEV_MISCONFIGURED; zc0301_stop_transfer(cam); cam->state |= DEV_DISCONNECTED; diff --git a/drivers/media/video/zr364xx.c b/drivers/media/video/zr364xx.c index 7cdac99deea6..a1d81ed44c7c 100644 --- a/drivers/media/video/zr364xx.c +++ b/drivers/media/video/zr364xx.c @@ -885,7 +885,7 @@ static int zr364xx_probe(struct usb_interface *intf, usb_set_intfdata(intf, cam); dev_info(&udev->dev, DRIVER_DESC " controlling video device %d\n", - cam->vdev->minor); + cam->vdev->num); return 0; } diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 68e237b830ad..0acefe8aff87 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -17,7 +17,7 @@ wm8350-objs := wm8350-core.o wm8350-regmap.o wm8350-gpio.o obj-$(CONFIG_MFD_WM8350) += wm8350.o obj-$(CONFIG_MFD_WM8350_I2C) += wm8350-i2c.o -obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o +obj-$(CONFIG_TWL4030_CORE) += twl4030-core.o twl4030-irq.o obj-$(CONFIG_MFD_CORE) += mfd-core.o diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c index 220e4371266b..170f9d47c2f9 100644 --- a/drivers/mfd/sm501.c +++ b/drivers/mfd/sm501.c @@ -1374,31 +1374,31 @@ static int sm501_init_dev(struct sm501_devdata *sm) static int sm501_plat_probe(struct platform_device *dev) { struct sm501_devdata *sm; - int err; + int ret; sm = kzalloc(sizeof(struct sm501_devdata), GFP_KERNEL); if (sm == NULL) { dev_err(&dev->dev, "no memory for device data\n"); - err = -ENOMEM; + ret = -ENOMEM; goto err1; } sm->dev = &dev->dev; sm->pdev_id = dev->id; - sm->irq = platform_get_irq(dev, 0); - sm->io_res = platform_get_resource(dev, IORESOURCE_MEM, 1); - sm->mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0); sm->platdata = dev->dev.platform_data; - if (sm->irq < 0) { + ret = platform_get_irq(dev, 0); + if (ret < 0) { dev_err(&dev->dev, "failed to get irq resource\n"); - err = sm->irq; goto err_res; } + sm->irq = ret; + sm->io_res = platform_get_resource(dev, IORESOURCE_MEM, 1); + sm->mem_res = platform_get_resource(dev, IORESOURCE_MEM, 0); if (sm->io_res == NULL || sm->mem_res == NULL) { dev_err(&dev->dev, "failed to get IO resource\n"); - err = -ENOENT; + ret = -ENOENT; goto err_res; } @@ -1407,7 +1407,7 @@ static int sm501_plat_probe(struct platform_device *dev) if (sm->regs_claim == NULL) { dev_err(&dev->dev, "cannot claim registers\n"); - err= -EBUSY; + ret = -EBUSY; goto err_res; } @@ -1418,7 +1418,7 @@ static int sm501_plat_probe(struct platform_device *dev) if (sm->regs == NULL) { dev_err(&dev->dev, "cannot remap registers\n"); - err = -EIO; + ret = -EIO; goto err_claim; } @@ -1430,7 +1430,7 @@ static int sm501_plat_probe(struct platform_device *dev) err_res: kfree(sm); err1: - return err; + return ret; } @@ -1625,8 +1625,7 @@ static int sm501_pci_probe(struct pci_dev *dev, goto err3; } - sm->regs = ioremap(pci_resource_start(dev, 1), - pci_resource_len(dev, 1)); + sm->regs = pci_ioremap_bar(dev, 1); if (sm->regs == NULL) { dev_err(&dev->dev, "cannot remap registers\n"); diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c index fd9a0160202c..dd843c4fbcc7 100644 --- a/drivers/mfd/twl4030-core.c +++ b/drivers/mfd/twl4030-core.c @@ -27,15 +27,11 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include <linux/kernel_stat.h> #include <linux/init.h> #include <linux/mutex.h> -#include <linux/interrupt.h> -#include <linux/irq.h> -#include <linux/random.h> -#include <linux/kthread.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/err.h> #include <linux/i2c.h> #include <linux/i2c/twl4030.h> @@ -93,26 +89,6 @@ #define twl_has_usb() false #endif -static inline void activate_irq(int irq) -{ -#ifdef CONFIG_ARM - /* ARM requires an extra step to clear IRQ_NOREQUEST, which it - * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE. - */ - set_irq_flags(irq, IRQF_VALID); -#else - /* same effect on other architectures */ - set_irq_noprobe(irq); -#endif -} - -/* Primary Interrupt Handler on TWL4030 Registers */ - -/* Register Definitions */ - -#define REG_PIH_ISR_P1 (0x1) -#define REG_PIH_ISR_P2 (0x2) -#define REG_PIH_SIR (0x3) /* Triton Core internal information (BEGIN) */ @@ -175,138 +151,6 @@ static inline void activate_irq(int irq) /*----------------------------------------------------------------------*/ -/** - * struct twl4030_mod_iregs - TWL module IMR/ISR regs to mask/clear at init - * @mod_no: TWL4030 module number (e.g., TWL4030_MODULE_GPIO) - * @sih_ctrl: address of module SIH_CTRL register - * @reg_cnt: number of IMR/ISR regs - * @imrs: pointer to array of TWL module interrupt mask register indices - * @isrs: pointer to array of TWL module interrupt status register indices - * - * Ties together TWL4030 modules and lists of IMR/ISR registers to mask/clear - * during twl_init_irq(). - */ -struct twl4030_mod_iregs { - const u8 mod_no; - const u8 sih_ctrl; - const u8 reg_cnt; - const u8 *imrs; - const u8 *isrs; -}; - -/* TWL4030 INT module interrupt mask registers */ -static const u8 __initconst twl4030_int_imr_regs[] = { - TWL4030_INT_PWR_IMR1, - TWL4030_INT_PWR_IMR2, -}; - -/* TWL4030 INT module interrupt status registers */ -static const u8 __initconst twl4030_int_isr_regs[] = { - TWL4030_INT_PWR_ISR1, - TWL4030_INT_PWR_ISR2, -}; - -/* TWL4030 INTERRUPTS module interrupt mask registers */ -static const u8 __initconst twl4030_interrupts_imr_regs[] = { - TWL4030_INTERRUPTS_BCIIMR1A, - TWL4030_INTERRUPTS_BCIIMR1B, - TWL4030_INTERRUPTS_BCIIMR2A, - TWL4030_INTERRUPTS_BCIIMR2B, -}; - -/* TWL4030 INTERRUPTS module interrupt status registers */ -static const u8 __initconst twl4030_interrupts_isr_regs[] = { - TWL4030_INTERRUPTS_BCIISR1A, - TWL4030_INTERRUPTS_BCIISR1B, - TWL4030_INTERRUPTS_BCIISR2A, - TWL4030_INTERRUPTS_BCIISR2B, -}; - -/* TWL4030 MADC module interrupt mask registers */ -static const u8 __initconst twl4030_madc_imr_regs[] = { - TWL4030_MADC_IMR1, - TWL4030_MADC_IMR2, -}; - -/* TWL4030 MADC module interrupt status registers */ -static const u8 __initconst twl4030_madc_isr_regs[] = { - TWL4030_MADC_ISR1, - TWL4030_MADC_ISR2, -}; - -/* TWL4030 keypad module interrupt mask registers */ -static const u8 __initconst twl4030_keypad_imr_regs[] = { - TWL4030_KEYPAD_KEYP_IMR1, - TWL4030_KEYPAD_KEYP_IMR2, -}; - -/* TWL4030 keypad module interrupt status registers */ -static const u8 __initconst twl4030_keypad_isr_regs[] = { - TWL4030_KEYPAD_KEYP_ISR1, - TWL4030_KEYPAD_KEYP_ISR2, -}; - -/* TWL4030 GPIO module interrupt mask registers */ -static const u8 __initconst twl4030_gpio_imr_regs[] = { - REG_GPIO_IMR1A, - REG_GPIO_IMR1B, - REG_GPIO_IMR2A, - REG_GPIO_IMR2B, - REG_GPIO_IMR3A, - REG_GPIO_IMR3B, -}; - -/* TWL4030 GPIO module interrupt status registers */ -static const u8 __initconst twl4030_gpio_isr_regs[] = { - REG_GPIO_ISR1A, - REG_GPIO_ISR1B, - REG_GPIO_ISR2A, - REG_GPIO_ISR2B, - REG_GPIO_ISR3A, - REG_GPIO_ISR3B, -}; - -/* TWL4030 modules that have IMR/ISR registers that must be masked/cleared */ -static const struct twl4030_mod_iregs __initconst twl4030_mod_regs[] = { - { - .mod_no = TWL4030_MODULE_INT, - .sih_ctrl = TWL4030_INT_PWR_SIH_CTRL, - .reg_cnt = ARRAY_SIZE(twl4030_int_imr_regs), - .imrs = twl4030_int_imr_regs, - .isrs = twl4030_int_isr_regs, - }, - { - .mod_no = TWL4030_MODULE_INTERRUPTS, - .sih_ctrl = TWL4030_INTERRUPTS_BCISIHCTRL, - .reg_cnt = ARRAY_SIZE(twl4030_interrupts_imr_regs), - .imrs = twl4030_interrupts_imr_regs, - .isrs = twl4030_interrupts_isr_regs, - }, - { - .mod_no = TWL4030_MODULE_MADC, - .sih_ctrl = TWL4030_MADC_SIH_CTRL, - .reg_cnt = ARRAY_SIZE(twl4030_madc_imr_regs), - .imrs = twl4030_madc_imr_regs, - .isrs = twl4030_madc_isr_regs, - }, - { - .mod_no = TWL4030_MODULE_KEYPAD, - .sih_ctrl = TWL4030_KEYPAD_KEYP_SIH_CTRL, - .reg_cnt = ARRAY_SIZE(twl4030_keypad_imr_regs), - .imrs = twl4030_keypad_imr_regs, - .isrs = twl4030_keypad_isr_regs, - }, - { - .mod_no = TWL4030_MODULE_GPIO, - .sih_ctrl = REG_GPIO_SIH_CTRL, - .reg_cnt = ARRAY_SIZE(twl4030_gpio_imr_regs), - .imrs = twl4030_gpio_imr_regs, - .isrs = twl4030_gpio_isr_regs, - }, -}; - -/*----------------------------------------------------------------*/ - /* is driver active, bound to a chip? */ static bool inuse; @@ -367,33 +211,6 @@ static struct twl4030mapping twl4030_map[TWL4030_MODULE_LAST + 1] = { /*----------------------------------------------------------------------*/ -/* - * TWL4030 doesn't have PIH mask, hence dummy function for mask - * and unmask of the (eight) interrupts reported at that level ... - * masking is only available from SIH (secondary) modules. - */ - -static void twl4030_i2c_ackirq(unsigned int irq) -{ -} - -static void twl4030_i2c_disableint(unsigned int irq) -{ -} - -static void twl4030_i2c_enableint(unsigned int irq) -{ -} - -static struct irq_chip twl4030_irq_chip = { - .name = "twl4030", - .ack = twl4030_i2c_ackirq, - .mask = twl4030_i2c_disableint, - .unmask = twl4030_i2c_enableint, -}; - -/*----------------------------------------------------------------------*/ - /* Exported Functions */ /** @@ -535,108 +352,11 @@ EXPORT_SYMBOL(twl4030_i2c_read_u8); /*----------------------------------------------------------------------*/ -static unsigned twl4030_irq_base; - -static struct completion irq_event; - -/* - * This thread processes interrupts reported by the Primary Interrupt Handler. - */ -static int twl4030_irq_thread(void *data) -{ - long irq = (long)data; - irq_desc_t *desc = irq_desc + irq; - static unsigned i2c_errors; - const static unsigned max_i2c_errors = 100; - - current->flags |= PF_NOFREEZE; - - while (!kthread_should_stop()) { - int ret; - int module_irq; - u8 pih_isr; - - /* Wait for IRQ, then read PIH irq status (also blocking) */ - wait_for_completion_interruptible(&irq_event); - - ret = twl4030_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr, - REG_PIH_ISR_P1); - if (ret) { - pr_warning("%s: I2C error %d reading PIH ISR\n", - DRIVER_NAME, ret); - if (++i2c_errors >= max_i2c_errors) { - printk(KERN_ERR "Maximum I2C error count" - " exceeded. Terminating %s.\n", - __func__); - break; - } - complete(&irq_event); - continue; - } - - /* these handlers deal with the relevant SIH irq status */ - local_irq_disable(); - for (module_irq = twl4030_irq_base; - pih_isr; - pih_isr >>= 1, module_irq++) { - if (pih_isr & 0x1) { - irq_desc_t *d = irq_desc + module_irq; - - d->handle_irq(module_irq, d); - } - } - local_irq_enable(); - - desc->chip->unmask(irq); - } - - return 0; -} - /* - * do_twl4030_irq() is the desc->handle method for the twl4030 interrupt. - * This is a chained interrupt, so there is no desc->action method for it. - * Now we need to query the interrupt controller in the twl4030 to determine - * which module is generating the interrupt request. However, we can't do i2c - * transactions in interrupt context, so we must defer that work to a kernel - * thread. All we do here is acknowledge and mask the interrupt and wakeup - * the kernel thread. + * NOTE: We know the first 8 IRQs after pdata->base_irq are + * for the PIH, and the next are for the PWR_INT SIH, since + * that's how twl_init_irq() sets things up. */ -static void do_twl4030_irq(unsigned int irq, irq_desc_t *desc) -{ - const unsigned int cpu = smp_processor_id(); - - /* - * Earlier this was desc->triggered = 1; - */ - desc->status |= IRQ_LEVEL; - - /* - * Acknowledge, clear _AND_ disable the interrupt. - */ - desc->chip->ack(irq); - - if (!desc->depth) { - kstat_cpu(cpu).irqs[irq]++; - - complete(&irq_event); - } -} - -static struct task_struct * __init start_twl4030_irq_thread(long irq) -{ - struct task_struct *thread; - - init_completion(&irq_event); - thread = kthread_run(twl4030_irq_thread, (void *)irq, "twl4030-irq"); - if (!thread) - pr_err("%s: could not create twl4030 irq %ld thread!\n", - DRIVER_NAME, irq); - - return thread; -} - -/*----------------------------------------------------------------------*/ static int add_children(struct twl4030_platform_data *pdata) { @@ -668,7 +388,7 @@ static int add_children(struct twl4030_platform_data *pdata) if (status == 0) { struct resource r = { - .start = TWL4030_PWRIRQ_CHG_PRES, + .start = pdata->irq_base + 8 + 1, .flags = IORESOURCE_IRQ, }; @@ -817,8 +537,7 @@ static int add_children(struct twl4030_platform_data *pdata) /* RTC module IRQ */ if (status == 0) { struct resource r = { - /* REVISIT don't hard-wire this stuff */ - .start = TWL4030_PWRIRQ_RTC, + .start = pdata->irq_base + 8 + 3, .flags = IORESOURCE_IRQ, }; @@ -863,7 +582,7 @@ static int add_children(struct twl4030_platform_data *pdata) if (status == 0) { struct resource r = { - .start = TWL4030_PWRIRQ_USB_PRES, + .start = pdata->irq_base + 8 + 2, .flags = IORESOURCE_IRQ, }; @@ -965,123 +684,17 @@ static void __init clocks_init(void) /*----------------------------------------------------------------------*/ -/** - * twl4030_i2c_clear_isr - clear TWL4030 SIH ISR regs via read + write - * @mod_no: TWL4030 module number - * @reg: register index to clear - * @cor: value of the <module>_SIH_CTRL.COR bit (1 or 0) - * - * Either reads (cor == 1) or writes (cor == 0) to a TWL4030 interrupt - * status register to ensure that any prior interrupts are cleared. - * Returns the status from the I2C read operation. - */ -static int __init twl4030_i2c_clear_isr(u8 mod_no, u8 reg, u8 cor) -{ - u8 tmp; - - return (cor) ? twl4030_i2c_read_u8(mod_no, &tmp, reg) : - twl4030_i2c_write_u8(mod_no, 0xff, reg); -} - -/** - * twl4030_read_cor_bit - are TWL module ISRs cleared by reads or writes? - * @mod_no: TWL4030 module number - * @reg: register index to clear - * - * Returns 1 if the TWL4030 SIH interrupt status registers (ISRs) for - * the specified TWL module are cleared by reads, or 0 if cleared by - * writes. - */ -static int twl4030_read_cor_bit(u8 mod_no, u8 reg) -{ - u8 tmp = 0; - - WARN_ON(twl4030_i2c_read_u8(mod_no, &tmp, reg) < 0); - - tmp &= TWL4030_SIH_CTRL_COR_MASK; - tmp >>= __ffs(TWL4030_SIH_CTRL_COR_MASK); - - return tmp; -} - -/** - * twl4030_mask_clear_intrs - mask and clear all TWL4030 interrupts - * @t: pointer to twl4030_mod_iregs array - * @t_sz: ARRAY_SIZE(t) (starting at 1) - * - * Mask all TWL4030 interrupt mask registers (IMRs) and clear all - * interrupt status registers (ISRs). No return value, but will WARN if - * any I2C operations fail. - */ -static void __init twl4030_mask_clear_intrs(const struct twl4030_mod_iregs *t, - const u8 t_sz) -{ - int i, j; - - /* - * N.B. - further efficiency is possible here. Eight I2C - * operations on BCI and GPIO modules are avoidable if I2C - * burst read/write transactions were implemented. Would - * probably save about 1ms of boot time and a small amount of - * power. - */ - for (i = 0; i < t_sz; i++) { - const struct twl4030_mod_iregs tmr = t[i]; - int cor; - - /* Are ISRs cleared by reads or writes? */ - cor = twl4030_read_cor_bit(tmr.mod_no, tmr.sih_ctrl); - - for (j = 0; j < tmr.reg_cnt; j++) { - - /* Mask interrupts at the TWL4030 */ - WARN_ON(twl4030_i2c_write_u8(tmr.mod_no, 0xff, - tmr.imrs[j]) < 0); - - /* Clear TWL4030 ISRs */ - WARN_ON(twl4030_i2c_clear_isr(tmr.mod_no, - tmr.isrs[j], cor) < 0); - } - } -} - - -static void twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) -{ - int i; - - /* - * Mask and clear all TWL4030 interrupts since initially we do - * not have any TWL4030 module interrupt handlers present - */ - twl4030_mask_clear_intrs(twl4030_mod_regs, - ARRAY_SIZE(twl4030_mod_regs)); - - twl4030_irq_base = irq_base; - - /* install an irq handler for each of the PIH modules */ - for (i = irq_base; i < irq_end; i++) { - set_irq_chip_and_handler(i, &twl4030_irq_chip, - handle_simple_irq); - activate_irq(i); - } - - /* install an irq handler to demultiplex the TWL4030 interrupt */ - set_irq_data(irq_num, start_twl4030_irq_thread(irq_num)); - set_irq_chained_handler(irq_num, do_twl4030_irq); -} - -/*----------------------------------------------------------------------*/ +int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end); +int twl_exit_irq(void); static int twl4030_remove(struct i2c_client *client) { unsigned i; + int status; - /* FIXME undo twl_init_irq() */ - if (twl4030_irq_base) { - dev_err(&client->dev, "can't yet clean up IRQs?\n"); - return -ENOSYS; - } + status = twl_exit_irq(); + if (status < 0) + return status; for (i = 0; i < TWL4030_NUM_SLAVES; i++) { struct twl4030_client *twl = &twl4030_modules[i]; @@ -1112,7 +725,7 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) return -EIO; } - if (inuse || twl4030_irq_base) { + if (inuse) { dev_dbg(&client->dev, "driver is already in use\n"); return -EBUSY; } @@ -1146,9 +759,9 @@ twl4030_probe(struct i2c_client *client, const struct i2c_device_id *id) if (client->irq && pdata->irq_base && pdata->irq_end > pdata->irq_base) { - twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end); - dev_info(&client->dev, "IRQ %d chains IRQs %d..%d\n", - client->irq, pdata->irq_base, pdata->irq_end - 1); + status = twl_init_irq(client->irq, pdata->irq_base, pdata->irq_end); + if (status < 0) + goto fail; } status = add_children(pdata); diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c new file mode 100644 index 000000000000..fae868a8d499 --- /dev/null +++ b/drivers/mfd/twl4030-irq.c @@ -0,0 +1,743 @@ +/* + * twl4030-irq.c - TWL4030/TPS659x0 irq support + * + * Copyright (C) 2005-2006 Texas Instruments, Inc. + * + * Modifications to defer interrupt handling to a kernel thread: + * Copyright (C) 2006 MontaVista Software, Inc. + * + * Based on tlv320aic23.c: + * Copyright (c) by Kai Svahn <kai.svahn@nokia.com> + * + * Code cleanup and modifications to IRQ handler. + * by syed khasim <x0khasim@ti.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/kthread.h> + +#include <linux/i2c/twl4030.h> + + +/* + * TWL4030 IRQ handling has two stages in hardware, and thus in software. + * The Primary Interrupt Handler (PIH) stage exposes status bits saying + * which Secondary Interrupt Handler (SIH) stage is raising an interrupt. + * SIH modules are more traditional IRQ components, which support per-IRQ + * enable/disable and trigger controls; they do most of the work. + * + * These chips are designed to support IRQ handling from two different + * I2C masters. Each has a dedicated IRQ line, and dedicated IRQ status + * and mask registers in the PIH and SIH modules. + * + * We set up IRQs starting at a platform-specified base, always starting + * with PIH and the SIH for PWR_INT and then usually adding GPIO: + * base + 0 .. base + 7 PIH + * base + 8 .. base + 15 SIH for PWR_INT + * base + 16 .. base + 33 SIH for GPIO + */ + +/* PIH register offsets */ +#define REG_PIH_ISR_P1 0x01 +#define REG_PIH_ISR_P2 0x02 +#define REG_PIH_SIR 0x03 /* for testing */ + + +/* Linux could (eventually) use either IRQ line */ +static int irq_line; + +struct sih { + char name[8]; + u8 module; /* module id */ + u8 control_offset; /* for SIH_CTRL */ + bool set_cor; + + u8 bits; /* valid in isr/imr */ + u8 bytes_ixr; /* bytelen of ISR/IMR/SIR */ + + u8 edr_offset; + u8 bytes_edr; /* bytelen of EDR */ + + /* SIR ignored -- set interrupt, for testing only */ + struct irq_data { + u8 isr_offset; + u8 imr_offset; + } mask[2]; + /* + 2 bytes padding */ +}; + +#define SIH_INITIALIZER(modname, nbits) \ + .module = TWL4030_MODULE_ ## modname, \ + .control_offset = TWL4030_ ## modname ## _SIH_CTRL, \ + .bits = nbits, \ + .bytes_ixr = DIV_ROUND_UP(nbits, 8), \ + .edr_offset = TWL4030_ ## modname ## _EDR, \ + .bytes_edr = DIV_ROUND_UP((2*(nbits)), 8), \ + .mask = { { \ + .isr_offset = TWL4030_ ## modname ## _ISR1, \ + .imr_offset = TWL4030_ ## modname ## _IMR1, \ + }, \ + { \ + .isr_offset = TWL4030_ ## modname ## _ISR2, \ + .imr_offset = TWL4030_ ## modname ## _IMR2, \ + }, }, + +/* register naming policies are inconsistent ... */ +#define TWL4030_INT_PWR_EDR TWL4030_INT_PWR_EDR1 +#define TWL4030_MODULE_KEYPAD_KEYP TWL4030_MODULE_KEYPAD +#define TWL4030_MODULE_INT_PWR TWL4030_MODULE_INT + + +/* Order in this table matches order in PIH_ISR. That is, + * BIT(n) in PIH_ISR is sih_modules[n]. + */ +static const struct sih sih_modules[6] = { + [0] = { + .name = "gpio", + .module = TWL4030_MODULE_GPIO, + .control_offset = REG_GPIO_SIH_CTRL, + .set_cor = true, + .bits = TWL4030_GPIO_MAX, + .bytes_ixr = 3, + /* Note: *all* of these IRQs default to no-trigger */ + .edr_offset = REG_GPIO_EDR1, + .bytes_edr = 5, + .mask = { { + .isr_offset = REG_GPIO_ISR1A, + .imr_offset = REG_GPIO_IMR1A, + }, { + .isr_offset = REG_GPIO_ISR1B, + .imr_offset = REG_GPIO_IMR1B, + }, }, + }, + [1] = { + .name = "keypad", + .set_cor = true, + SIH_INITIALIZER(KEYPAD_KEYP, 4) + }, + [2] = { + .name = "bci", + .module = TWL4030_MODULE_INTERRUPTS, + .control_offset = TWL4030_INTERRUPTS_BCISIHCTRL, + .bits = 12, + .bytes_ixr = 2, + .edr_offset = TWL4030_INTERRUPTS_BCIEDR1, + /* Note: most of these IRQs default to no-trigger */ + .bytes_edr = 3, + .mask = { { + .isr_offset = TWL4030_INTERRUPTS_BCIISR1A, + .imr_offset = TWL4030_INTERRUPTS_BCIIMR1A, + }, { + .isr_offset = TWL4030_INTERRUPTS_BCIISR1B, + .imr_offset = TWL4030_INTERRUPTS_BCIIMR1B, + }, }, + }, + [3] = { + .name = "madc", + SIH_INITIALIZER(MADC, 4) + }, + [4] = { + /* USB doesn't use the same SIH organization */ + .name = "usb", + }, + [5] = { + .name = "power", + .set_cor = true, + SIH_INITIALIZER(INT_PWR, 8) + }, + /* there are no SIH modules #6 or #7 ... */ +}; + +#undef TWL4030_MODULE_KEYPAD_KEYP +#undef TWL4030_MODULE_INT_PWR +#undef TWL4030_INT_PWR_EDR + +/*----------------------------------------------------------------------*/ + +static unsigned twl4030_irq_base; + +static struct completion irq_event; + +/* + * This thread processes interrupts reported by the Primary Interrupt Handler. + */ +static int twl4030_irq_thread(void *data) +{ + long irq = (long)data; + irq_desc_t *desc = irq_desc + irq; + static unsigned i2c_errors; + const static unsigned max_i2c_errors = 100; + + current->flags |= PF_NOFREEZE; + + while (!kthread_should_stop()) { + int ret; + int module_irq; + u8 pih_isr; + + /* Wait for IRQ, then read PIH irq status (also blocking) */ + wait_for_completion_interruptible(&irq_event); + + ret = twl4030_i2c_read_u8(TWL4030_MODULE_PIH, &pih_isr, + REG_PIH_ISR_P1); + if (ret) { + pr_warning("twl4030: I2C error %d reading PIH ISR\n", + ret); + if (++i2c_errors >= max_i2c_errors) { + printk(KERN_ERR "Maximum I2C error count" + " exceeded. Terminating %s.\n", + __func__); + break; + } + complete(&irq_event); + continue; + } + + /* these handlers deal with the relevant SIH irq status */ + local_irq_disable(); + for (module_irq = twl4030_irq_base; + pih_isr; + pih_isr >>= 1, module_irq++) { + if (pih_isr & 0x1) { + irq_desc_t *d = irq_desc + module_irq; + + /* These can't be masked ... always warn + * if we get any surprises. + */ + if (d->status & IRQ_DISABLED) + note_interrupt(module_irq, d, + IRQ_NONE); + else + d->handle_irq(module_irq, d); + } + } + local_irq_enable(); + + desc->chip->unmask(irq); + } + + return 0; +} + +/* + * handle_twl4030_pih() is the desc->handle method for the twl4030 interrupt. + * This is a chained interrupt, so there is no desc->action method for it. + * Now we need to query the interrupt controller in the twl4030 to determine + * which module is generating the interrupt request. However, we can't do i2c + * transactions in interrupt context, so we must defer that work to a kernel + * thread. All we do here is acknowledge and mask the interrupt and wakeup + * the kernel thread. + */ +static void handle_twl4030_pih(unsigned int irq, irq_desc_t *desc) +{ + /* Acknowledge, clear *AND* mask the interrupt... */ + desc->chip->ack(irq); + complete(&irq_event); +} + +static struct task_struct *start_twl4030_irq_thread(long irq) +{ + struct task_struct *thread; + + init_completion(&irq_event); + thread = kthread_run(twl4030_irq_thread, (void *)irq, "twl4030-irq"); + if (!thread) + pr_err("twl4030: could not create irq %ld thread!\n", irq); + + return thread; +} + +/*----------------------------------------------------------------------*/ + +/* + * twl4030_init_sih_modules() ... start from a known state where no + * IRQs will be coming in, and where we can quickly enable them then + * handle them as they arrive. Mask all IRQs: maybe init SIH_CTRL. + * + * NOTE: we don't touch EDR registers here; they stay with hardware + * defaults or whatever the last value was. Note that when both EDR + * bits for an IRQ are clear, that's as if its IMR bit is set... + */ +static int twl4030_init_sih_modules(unsigned line) +{ + const struct sih *sih; + u8 buf[4]; + int i; + int status; + + /* line 0 == int1_n signal; line 1 == int2_n signal */ + if (line > 1) + return -EINVAL; + + irq_line = line; + + /* disable all interrupts on our line */ + memset(buf, 0xff, sizeof buf); + sih = sih_modules; + for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) { + + /* skip USB -- it's funky */ + if (!sih->bytes_ixr) + continue; + + status = twl4030_i2c_write(sih->module, buf, + sih->mask[line].imr_offset, sih->bytes_ixr); + if (status < 0) + pr_err("twl4030: err %d initializing %s %s\n", + status, sih->name, "IMR"); + + /* Maybe disable "exclusive" mode; buffer second pending irq; + * set Clear-On-Read (COR) bit. + * + * NOTE that sometimes COR polarity is documented as being + * inverted: for MADC and BCI, COR=1 means "clear on write". + * And for PWR_INT it's not documented... + */ + if (sih->set_cor) { + status = twl4030_i2c_write_u8(sih->module, + TWL4030_SIH_CTRL_COR_MASK, + sih->control_offset); + if (status < 0) + pr_err("twl4030: err %d initializing %s %s\n", + status, sih->name, "SIH_CTRL"); + } + } + + sih = sih_modules; + for (i = 0; i < ARRAY_SIZE(sih_modules); i++, sih++) { + u8 rxbuf[4]; + int j; + + /* skip USB */ + if (!sih->bytes_ixr) + continue; + + /* Clear pending interrupt status. Either the read was + * enough, or we need to write those bits. Repeat, in + * case an IRQ is pending (PENDDIS=0) ... that's not + * uncommon with PWR_INT.PWRON. + */ + for (j = 0; j < 2; j++) { + status = twl4030_i2c_read(sih->module, rxbuf, + sih->mask[line].isr_offset, sih->bytes_ixr); + if (status < 0) + pr_err("twl4030: err %d initializing %s %s\n", + status, sih->name, "ISR"); + + if (!sih->set_cor) + status = twl4030_i2c_write(sih->module, buf, + sih->mask[line].isr_offset, + sih->bytes_ixr); + /* else COR=1 means read sufficed. + * (for most SIH modules...) + */ + } + } + + return 0; +} + +static inline void activate_irq(int irq) +{ +#ifdef CONFIG_ARM + /* ARM requires an extra step to clear IRQ_NOREQUEST, which it + * sets on behalf of every irq_chip. Also sets IRQ_NOPROBE. + */ + set_irq_flags(irq, IRQF_VALID); +#else + /* same effect on other architectures */ + set_irq_noprobe(irq); +#endif +} + +/*----------------------------------------------------------------------*/ + +static DEFINE_SPINLOCK(sih_agent_lock); + +static struct workqueue_struct *wq; + +struct sih_agent { + int irq_base; + const struct sih *sih; + + u32 imr; + bool imr_change_pending; + struct work_struct mask_work; + + u32 edge_change; + struct work_struct edge_work; +}; + +static void twl4030_sih_do_mask(struct work_struct *work) +{ + struct sih_agent *agent; + const struct sih *sih; + union { + u8 bytes[4]; + u32 word; + } imr; + int status; + + agent = container_of(work, struct sih_agent, mask_work); + + /* see what work we have */ + spin_lock_irq(&sih_agent_lock); + if (agent->imr_change_pending) { + sih = agent->sih; + /* byte[0] gets overwritten as we write ... */ + imr.word = cpu_to_le32(agent->imr << 8); + agent->imr_change_pending = false; + } else + sih = NULL; + spin_unlock_irq(&sih_agent_lock); + if (!sih) + return; + + /* write the whole mask ... simpler than subsetting it */ + status = twl4030_i2c_write(sih->module, imr.bytes, + sih->mask[irq_line].imr_offset, sih->bytes_ixr); + if (status) + pr_err("twl4030: %s, %s --> %d\n", __func__, + "write", status); +} + +static void twl4030_sih_do_edge(struct work_struct *work) +{ + struct sih_agent *agent; + const struct sih *sih; + u8 bytes[6]; + u32 edge_change; + int status; + + agent = container_of(work, struct sih_agent, edge_work); + + /* see what work we have */ + spin_lock_irq(&sih_agent_lock); + edge_change = agent->edge_change; + agent->edge_change = 0;; + sih = edge_change ? agent->sih : NULL; + spin_unlock_irq(&sih_agent_lock); + if (!sih) + return; + + /* Read, reserving first byte for write scratch. Yes, this + * could be cached for some speedup ... but be careful about + * any processor on the other IRQ line, EDR registers are + * shared. + */ + status = twl4030_i2c_read(sih->module, bytes + 1, + sih->edr_offset, sih->bytes_edr); + if (status) { + pr_err("twl4030: %s, %s --> %d\n", __func__, + "read", status); + return; + } + + /* Modify only the bits we know must change */ + while (edge_change) { + int i = fls(edge_change) - 1; + struct irq_desc *d = irq_desc + i + agent->irq_base; + int byte = 1 + (i >> 2); + int off = (i & 0x3) * 2; + + bytes[byte] &= ~(0x03 << off); + + spin_lock_irq(&d->lock); + if (d->status & IRQ_TYPE_EDGE_RISING) + bytes[byte] |= BIT(off + 1); + if (d->status & IRQ_TYPE_EDGE_FALLING) + bytes[byte] |= BIT(off + 0); + spin_unlock_irq(&d->lock); + + edge_change &= ~BIT(i); + } + + /* Write */ + status = twl4030_i2c_write(sih->module, bytes, + sih->edr_offset, sih->bytes_edr); + if (status) + pr_err("twl4030: %s, %s --> %d\n", __func__, + "write", status); +} + +/*----------------------------------------------------------------------*/ + +/* + * All irq_chip methods get issued from code holding irq_desc[irq].lock, + * which can't perform the underlying I2C operations (because they sleep). + * So we must hand them off to a thread (workqueue) and cope with asynch + * completion, potentially including some re-ordering, of these requests. + */ + +static void twl4030_sih_mask(unsigned irq) +{ + struct sih_agent *sih = get_irq_chip_data(irq); + unsigned long flags; + + spin_lock_irqsave(&sih_agent_lock, flags); + sih->imr |= BIT(irq - sih->irq_base); + sih->imr_change_pending = true; + queue_work(wq, &sih->mask_work); + spin_unlock_irqrestore(&sih_agent_lock, flags); +} + +static void twl4030_sih_unmask(unsigned irq) +{ + struct sih_agent *sih = get_irq_chip_data(irq); + unsigned long flags; + + spin_lock_irqsave(&sih_agent_lock, flags); + sih->imr &= ~BIT(irq - sih->irq_base); + sih->imr_change_pending = true; + queue_work(wq, &sih->mask_work); + spin_unlock_irqrestore(&sih_agent_lock, flags); +} + +static int twl4030_sih_set_type(unsigned irq, unsigned trigger) +{ + struct sih_agent *sih = get_irq_chip_data(irq); + struct irq_desc *desc = irq_desc + irq; + unsigned long flags; + + if (trigger & ~(IRQ_TYPE_EDGE_FALLING | IRQ_TYPE_EDGE_RISING)) + return -EINVAL; + + spin_lock_irqsave(&sih_agent_lock, flags); + if ((desc->status & IRQ_TYPE_SENSE_MASK) != trigger) { + desc->status &= ~IRQ_TYPE_SENSE_MASK; + desc->status |= trigger; + sih->edge_change |= BIT(irq - sih->irq_base); + queue_work(wq, &sih->edge_work); + } + spin_unlock_irqrestore(&sih_agent_lock, flags); + return 0; +} + +static struct irq_chip twl4030_sih_irq_chip = { + .name = "twl4030", + .mask = twl4030_sih_mask, + .unmask = twl4030_sih_unmask, + .set_type = twl4030_sih_set_type, +}; + +/*----------------------------------------------------------------------*/ + +static inline int sih_read_isr(const struct sih *sih) +{ + int status; + union { + u8 bytes[4]; + u32 word; + } isr; + + /* FIXME need retry-on-error ... */ + + isr.word = 0; + status = twl4030_i2c_read(sih->module, isr.bytes, + sih->mask[irq_line].isr_offset, sih->bytes_ixr); + + return (status < 0) ? status : le32_to_cpu(isr.word); +} + +/* + * Generic handler for SIH interrupts ... we "know" this is called + * in task context, with IRQs enabled. + */ +static void handle_twl4030_sih(unsigned irq, struct irq_desc *desc) +{ + struct sih_agent *agent = get_irq_data(irq); + const struct sih *sih = agent->sih; + int isr; + + /* reading ISR acks the IRQs, using clear-on-read mode */ + local_irq_enable(); + isr = sih_read_isr(sih); + local_irq_disable(); + + if (isr < 0) { + pr_err("twl4030: %s SIH, read ISR error %d\n", + sih->name, isr); + /* REVISIT: recover; eventually mask it all, etc */ + return; + } + + while (isr) { + irq = fls(isr); + irq--; + isr &= ~BIT(irq); + + if (irq < sih->bits) + generic_handle_irq(agent->irq_base + irq); + else + pr_err("twl4030: %s SIH, invalid ISR bit %d\n", + sih->name, irq); + } +} + +static unsigned twl4030_irq_next; + +/* returns the first IRQ used by this SIH bank, + * or negative errno + */ +int twl4030_sih_setup(int module) +{ + int sih_mod; + const struct sih *sih = NULL; + struct sih_agent *agent; + int i, irq; + int status = -EINVAL; + unsigned irq_base = twl4030_irq_next; + + /* only support modules with standard clear-on-read for now */ + for (sih_mod = 0, sih = sih_modules; + sih_mod < ARRAY_SIZE(sih_modules); + sih_mod++, sih++) { + if (sih->module == module && sih->set_cor) { + if (!WARN((irq_base + sih->bits) > NR_IRQS, + "irq %d for %s too big\n", + irq_base + sih->bits, + sih->name)) + status = 0; + break; + } + } + if (status < 0) + return status; + + agent = kzalloc(sizeof *agent, GFP_KERNEL); + if (!agent) + return -ENOMEM; + + status = 0; + + agent->irq_base = irq_base; + agent->sih = sih; + agent->imr = ~0; + INIT_WORK(&agent->mask_work, twl4030_sih_do_mask); + INIT_WORK(&agent->edge_work, twl4030_sih_do_edge); + + for (i = 0; i < sih->bits; i++) { + irq = irq_base + i; + + set_irq_chip_and_handler(irq, &twl4030_sih_irq_chip, + handle_edge_irq); + set_irq_chip_data(irq, agent); + activate_irq(irq); + } + + status = irq_base; + twl4030_irq_next += i; + + /* replace generic PIH handler (handle_simple_irq) */ + irq = sih_mod + twl4030_irq_base; + set_irq_data(irq, agent); + set_irq_chained_handler(irq, handle_twl4030_sih); + + pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", sih->name, + irq, irq_base, twl4030_irq_next - 1); + + return status; +} + +/* FIXME need a call to reverse twl4030_sih_setup() ... */ + + +/*----------------------------------------------------------------------*/ + +/* FIXME pass in which interrupt line we'll use ... */ +#define twl_irq_line 0 + +int twl_init_irq(int irq_num, unsigned irq_base, unsigned irq_end) +{ + static struct irq_chip twl4030_irq_chip; + + int status; + int i; + struct task_struct *task; + + /* + * Mask and clear all TWL4030 interrupts since initially we do + * not have any TWL4030 module interrupt handlers present + */ + status = twl4030_init_sih_modules(twl_irq_line); + if (status < 0) + return status; + + wq = create_singlethread_workqueue("twl4030-irqchip"); + if (!wq) { + pr_err("twl4030: workqueue FAIL\n"); + return -ESRCH; + } + + twl4030_irq_base = irq_base; + + /* install an irq handler for each of the SIH modules; + * clone dummy irq_chip since PIH can't *do* anything + */ + twl4030_irq_chip = dummy_irq_chip; + twl4030_irq_chip.name = "twl4030"; + + twl4030_sih_irq_chip.ack = dummy_irq_chip.ack; + + for (i = irq_base; i < irq_end; i++) { + set_irq_chip_and_handler(i, &twl4030_irq_chip, + handle_simple_irq); + activate_irq(i); + } + twl4030_irq_next = i; + pr_info("twl4030: %s (irq %d) chaining IRQs %d..%d\n", "PIH", + irq_num, irq_base, twl4030_irq_next - 1); + + /* ... and the PWR_INT module ... */ + status = twl4030_sih_setup(TWL4030_MODULE_INT); + if (status < 0) { + pr_err("twl4030: sih_setup PWR INT --> %d\n", status); + goto fail; + } + + /* install an irq handler to demultiplex the TWL4030 interrupt */ + task = start_twl4030_irq_thread(irq_num); + if (!task) { + pr_err("twl4030: irq thread FAIL\n"); + status = -ESRCH; + goto fail; + } + + set_irq_data(irq_num, task); + set_irq_chained_handler(irq_num, handle_twl4030_pih); + + return status; + +fail: + for (i = irq_base; i < irq_end; i++) + set_irq_chip_and_handler(i, NULL, NULL); + destroy_workqueue(wq); + wq = NULL; + return status; +} + +int twl_exit_irq(void) +{ + /* FIXME undo twl_init_irq() */ + if (twl4030_irq_base) { + pr_err("twl4030: can't yet clean up IRQs?\n"); + return -ENOSYS; + } + return 0; +} diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c index bf87f675e7fa..0d47fb9e4b3b 100644 --- a/drivers/mfd/wm8350-core.c +++ b/drivers/mfd/wm8350-core.c @@ -183,6 +183,9 @@ static int wm8350_write(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *src) (wm8350->reg_cache[i] & ~wm8350_reg_io_map[i].writable) | src[i - reg]; + /* Don't store volatile bits */ + wm8350->reg_cache[i] &= ~wm8350_reg_io_map[i].vol; + src[i - reg] = cpu_to_be16(src[i - reg]); } @@ -1120,6 +1123,7 @@ static int wm8350_create_cache(struct wm8350 *wm8350, int mode) } value = be16_to_cpu(value); value &= wm8350_reg_io_map[i].readable; + value &= ~wm8350_reg_io_map[i].vol; wm8350->reg_cache[i] = value; } else wm8350->reg_cache[i] = reg_map[i]; @@ -1128,7 +1132,6 @@ static int wm8350_create_cache(struct wm8350 *wm8350, int mode) out: return ret; } -EXPORT_SYMBOL_GPL(wm8350_create_cache); /* * Register a client device. This is non-fatal since there is no need to diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index ad301ace6085..0b71ebc074b6 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -464,6 +464,12 @@ config MIPS_JAZZ_SONIC This is the driver for the onboard card of MIPS Magnum 4000, Acer PICA, Olivetti M700-10 and a few other identical OEM systems. +config XTENSA_XT2000_SONIC + tristate "Xtensa XT2000 onboard SONIC Ethernet support" + depends on XTENSA_PLATFORM_XT2000 + help + This is the driver for the onboard card of the Xtensa XT2000 board. + config MIPS_AU1X00_ENET bool "MIPS AU1000 Ethernet support" depends on SOC_AU1X00 @@ -2504,6 +2510,15 @@ config PASEMI_MAC This driver supports the on-chip 1/10Gbit Ethernet controller on PA Semi's PWRficient line of chips. +config MLX4_EN + tristate "Mellanox Technologies 10Gbit Ethernet support" + depends on PCI && INET + select MLX4_CORE + select INET_LRO + help + This driver supports Mellanox Technologies ConnectX Ethernet + devices. + config MLX4_CORE tristate depends on PCI diff --git a/drivers/net/Makefile b/drivers/net/Makefile index fa2510b2e609..f19acf8b9220 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -227,6 +227,8 @@ pasemi_mac_driver-objs := pasemi_mac.o pasemi_mac_ethtool.o obj-$(CONFIG_MLX4_CORE) += mlx4/ obj-$(CONFIG_ENC28J60) += enc28j60.o +obj-$(CONFIG_XTENSA_XT2000_SONIC) += xtsonic.o + obj-$(CONFIG_MACB) += macb.o obj-$(CONFIG_ARM) += arm/ diff --git a/drivers/net/fec_mpc52xx_phy.c b/drivers/net/fec_mpc52xx_phy.c index 08e18bcb970f..45dd9bdc5d62 100644 --- a/drivers/net/fec_mpc52xx_phy.c +++ b/drivers/net/fec_mpc52xx_phy.c @@ -2,6 +2,7 @@ * Driver for the MPC5200 Fast Ethernet Controller - MDIO bus driver * * Copyright (C) 2007 Domen Puncer, Telargo, Inc. + * Copyright (C) 2008 Wolfram Sang, Pengutronix * * This file is licensed under the terms of the GNU General Public License * version 2. This program is licensed "as is" without any warranty of any @@ -21,58 +22,45 @@ struct mpc52xx_fec_mdio_priv { struct mpc52xx_fec __iomem *regs; }; -static int mpc52xx_fec_mdio_read(struct mii_bus *bus, int phy_id, int reg) +static int mpc52xx_fec_mdio_transfer(struct mii_bus *bus, int phy_id, + int reg, u32 value) { struct mpc52xx_fec_mdio_priv *priv = bus->priv; struct mpc52xx_fec __iomem *fec; int tries = 100; - u32 request = FEC_MII_READ_FRAME; + + value |= (phy_id << FEC_MII_DATA_PA_SHIFT) & FEC_MII_DATA_PA_MSK; + value |= (reg << FEC_MII_DATA_RA_SHIFT) & FEC_MII_DATA_RA_MSK; fec = priv->regs; out_be32(&fec->ievent, FEC_IEVENT_MII); - - request |= (phy_id << FEC_MII_DATA_PA_SHIFT) & FEC_MII_DATA_PA_MSK; - request |= (reg << FEC_MII_DATA_RA_SHIFT) & FEC_MII_DATA_RA_MSK; - - out_be32(&priv->regs->mii_data, request); + out_be32(&priv->regs->mii_data, value); /* wait for it to finish, this takes about 23 us on lite5200b */ while (!(in_be32(&fec->ievent) & FEC_IEVENT_MII) && --tries) udelay(5); - if (tries == 0) + if (!tries) return -ETIMEDOUT; - return in_be32(&priv->regs->mii_data) & FEC_MII_DATA_DATAMSK; + return value & FEC_MII_DATA_OP_RD ? + in_be32(&priv->regs->mii_data) & FEC_MII_DATA_DATAMSK : 0; } -static int mpc52xx_fec_mdio_write(struct mii_bus *bus, int phy_id, int reg, u16 data) +static int mpc52xx_fec_mdio_read(struct mii_bus *bus, int phy_id, int reg) { - struct mpc52xx_fec_mdio_priv *priv = bus->priv; - struct mpc52xx_fec __iomem *fec; - u32 value = data; - int tries = 100; - - fec = priv->regs; - out_be32(&fec->ievent, FEC_IEVENT_MII); - - value |= FEC_MII_WRITE_FRAME; - value |= (phy_id << FEC_MII_DATA_PA_SHIFT) & FEC_MII_DATA_PA_MSK; - value |= (reg << FEC_MII_DATA_RA_SHIFT) & FEC_MII_DATA_RA_MSK; - - out_be32(&priv->regs->mii_data, value); - - /* wait for request to finish */ - while (!(in_be32(&fec->ievent) & FEC_IEVENT_MII) && --tries) - udelay(5); - - if (tries == 0) - return -ETIMEDOUT; + return mpc52xx_fec_mdio_transfer(bus, phy_id, reg, FEC_MII_READ_FRAME); +} - return 0; +static int mpc52xx_fec_mdio_write(struct mii_bus *bus, int phy_id, int reg, + u16 data) +{ + return mpc52xx_fec_mdio_transfer(bus, phy_id, reg, + data | FEC_MII_WRITE_FRAME); } -static int mpc52xx_fec_mdio_probe(struct of_device *of, const struct of_device_id *match) +static int mpc52xx_fec_mdio_probe(struct of_device *of, + const struct of_device_id *match) { struct device *dev = &of->dev; struct device_node *np = of->node; @@ -131,7 +119,8 @@ static int mpc52xx_fec_mdio_probe(struct of_device *of, const struct of_device_i dev_set_drvdata(dev, bus); /* set MII speed */ - out_be32(&priv->regs->mii_speed, ((mpc52xx_find_ipb_freq(of->node) >> 20) / 5) << 1); + out_be32(&priv->regs->mii_speed, + ((mpc52xx_find_ipb_freq(of->node) >> 20) / 5) << 1); /* enable MII interrupt */ out_be32(&priv->regs->imask, in_be32(&priv->regs->imask) | FEC_IMASK_MII); diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index efcf21c9f5c7..2ee2622258f5 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -2604,8 +2604,16 @@ static int __devinit emac_init_config(struct emac_instance *dev) if (of_device_is_compatible(np, "ibm,emac-440ep") || of_device_is_compatible(np, "ibm,emac-440gr")) dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX; - if (of_device_is_compatible(np, "ibm,emac-405ez")) + if (of_device_is_compatible(np, "ibm,emac-405ez")) { +#ifdef CONFIG_IBM_NEW_EMAC_NO_FLOW_CONTROL dev->features |= EMAC_FTR_NO_FLOW_CONTROL_40x; +#else + printk(KERN_ERR "%s: Flow control not disabled!\n", + np->full_name); + return -ENXIO; +#endif + } + } /* Fixup some feature bits based on the device tree */ diff --git a/drivers/net/ibm_newemac/mal.c b/drivers/net/ibm_newemac/mal.c index 1839d3f154a3..ecf9798987fa 100644 --- a/drivers/net/ibm_newemac/mal.c +++ b/drivers/net/ibm_newemac/mal.c @@ -280,9 +280,11 @@ static irqreturn_t mal_txeob(int irq, void *dev_instance) mal_schedule_poll(mal); set_mal_dcrn(mal, MAL_TXEOBISR, r); +#ifdef CONFIG_PPC_DCR_NATIVE if (mal_has_feature(mal, MAL_FTR_CLEAR_ICINTSTAT)) mtdcri(SDR0, DCRN_SDR_ICINTSTAT, (mfdcri(SDR0, DCRN_SDR_ICINTSTAT) | ICINTSTAT_ICTX)); +#endif return IRQ_HANDLED; } @@ -298,9 +300,11 @@ static irqreturn_t mal_rxeob(int irq, void *dev_instance) mal_schedule_poll(mal); set_mal_dcrn(mal, MAL_RXEOBISR, r); +#ifdef CONFIG_PPC_DCR_NATIVE if (mal_has_feature(mal, MAL_FTR_CLEAR_ICINTSTAT)) mtdcri(SDR0, DCRN_SDR_ICINTSTAT, (mfdcri(SDR0, DCRN_SDR_ICINTSTAT) | ICINTSTAT_ICRX)); +#endif return IRQ_HANDLED; } @@ -572,9 +576,18 @@ static int __devinit mal_probe(struct of_device *ofdev, goto fail; } - if (of_device_is_compatible(ofdev->node, "ibm,mcmal-405ez")) + if (of_device_is_compatible(ofdev->node, "ibm,mcmal-405ez")) { +#if defined(CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT) && \ + defined(CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR) mal->features |= (MAL_FTR_CLEAR_ICINTSTAT | MAL_FTR_COMMON_ERR_INT); +#else + printk(KERN_ERR "%s: Support for 405EZ not enabled!\n", + ofdev->node->full_name); + err = -ENODEV; + goto fail; +#endif + } mal->txeob_irq = irq_of_parse_and_map(ofdev->node, 0); mal->rxeob_irq = irq_of_parse_and_map(ofdev->node, 1); diff --git a/drivers/net/mlx4/Makefile b/drivers/net/mlx4/Makefile index 0952a6528f58..a7a97bf998f8 100644 --- a/drivers/net/mlx4/Makefile +++ b/drivers/net/mlx4/Makefile @@ -1,4 +1,9 @@ obj-$(CONFIG_MLX4_CORE) += mlx4_core.o mlx4_core-y := alloc.o catas.o cmd.o cq.o eq.o fw.o icm.o intf.o main.o mcg.o \ - mr.o pd.o profile.o qp.o reset.o srq.o + mr.o pd.o port.o profile.o qp.o reset.o srq.o + +obj-$(CONFIG_MLX4_EN) += mlx4_en.o + +mlx4_en-y := en_main.o en_tx.o en_rx.o en_params.o en_port.o en_cq.o \ + en_resources.o en_netdev.o diff --git a/drivers/net/mlx4/alloc.c b/drivers/net/mlx4/alloc.c index b411b79d72ad..ad95d5f7b630 100644 --- a/drivers/net/mlx4/alloc.c +++ b/drivers/net/mlx4/alloc.c @@ -48,13 +48,16 @@ u32 mlx4_bitmap_alloc(struct mlx4_bitmap *bitmap) obj = find_next_zero_bit(bitmap->table, bitmap->max, bitmap->last); if (obj >= bitmap->max) { - bitmap->top = (bitmap->top + bitmap->max) & bitmap->mask; + bitmap->top = (bitmap->top + bitmap->max + bitmap->reserved_top) + & bitmap->mask; obj = find_first_zero_bit(bitmap->table, bitmap->max); } if (obj < bitmap->max) { set_bit(obj, bitmap->table); - bitmap->last = (obj + 1) & (bitmap->max - 1); + bitmap->last = (obj + 1); + if (bitmap->last == bitmap->max) + bitmap->last = 0; obj |= bitmap->top; } else obj = -1; @@ -66,16 +69,90 @@ u32 mlx4_bitmap_alloc(struct mlx4_bitmap *bitmap) void mlx4_bitmap_free(struct mlx4_bitmap *bitmap, u32 obj) { - obj &= bitmap->max - 1; + mlx4_bitmap_free_range(bitmap, obj, 1); +} + +static unsigned long find_aligned_range(unsigned long *bitmap, + u32 start, u32 nbits, + int len, int align) +{ + unsigned long end, i; + +again: + start = ALIGN(start, align); + + while ((start < nbits) && test_bit(start, bitmap)) + start += align; + + if (start >= nbits) + return -1; + + end = start+len; + if (end > nbits) + return -1; + + for (i = start + 1; i < end; i++) { + if (test_bit(i, bitmap)) { + start = i + 1; + goto again; + } + } + + return start; +} + +u32 mlx4_bitmap_alloc_range(struct mlx4_bitmap *bitmap, int cnt, int align) +{ + u32 obj, i; + + if (likely(cnt == 1 && align == 1)) + return mlx4_bitmap_alloc(bitmap); + + spin_lock(&bitmap->lock); + + obj = find_aligned_range(bitmap->table, bitmap->last, + bitmap->max, cnt, align); + if (obj >= bitmap->max) { + bitmap->top = (bitmap->top + bitmap->max + bitmap->reserved_top) + & bitmap->mask; + obj = find_aligned_range(bitmap->table, 0, bitmap->max, + cnt, align); + } + + if (obj < bitmap->max) { + for (i = 0; i < cnt; i++) + set_bit(obj + i, bitmap->table); + if (obj == bitmap->last) { + bitmap->last = (obj + cnt); + if (bitmap->last >= bitmap->max) + bitmap->last = 0; + } + obj |= bitmap->top; + } else + obj = -1; + + spin_unlock(&bitmap->lock); + + return obj; +} + +void mlx4_bitmap_free_range(struct mlx4_bitmap *bitmap, u32 obj, int cnt) +{ + u32 i; + + obj &= bitmap->max + bitmap->reserved_top - 1; spin_lock(&bitmap->lock); - clear_bit(obj, bitmap->table); + for (i = 0; i < cnt; i++) + clear_bit(obj + i, bitmap->table); bitmap->last = min(bitmap->last, obj); - bitmap->top = (bitmap->top + bitmap->max) & bitmap->mask; + bitmap->top = (bitmap->top + bitmap->max + bitmap->reserved_top) + & bitmap->mask; spin_unlock(&bitmap->lock); } -int mlx4_bitmap_init(struct mlx4_bitmap *bitmap, u32 num, u32 mask, u32 reserved) +int mlx4_bitmap_init(struct mlx4_bitmap *bitmap, u32 num, u32 mask, + u32 reserved_bot, u32 reserved_top) { int i; @@ -85,14 +162,16 @@ int mlx4_bitmap_init(struct mlx4_bitmap *bitmap, u32 num, u32 mask, u32 reserved bitmap->last = 0; bitmap->top = 0; - bitmap->max = num; + bitmap->max = num - reserved_top; bitmap->mask = mask; + bitmap->reserved_top = reserved_top; spin_lock_init(&bitmap->lock); - bitmap->table = kzalloc(BITS_TO_LONGS(num) * sizeof (long), GFP_KERNEL); + bitmap->table = kzalloc(BITS_TO_LONGS(bitmap->max) * + sizeof (long), GFP_KERNEL); if (!bitmap->table) return -ENOMEM; - for (i = 0; i < reserved; ++i) + for (i = 0; i < reserved_bot; ++i) set_bit(i, bitmap->table); return 0; diff --git a/drivers/net/mlx4/cq.c b/drivers/net/mlx4/cq.c index 9bb50e3f8974..b7ad2829d67e 100644 --- a/drivers/net/mlx4/cq.c +++ b/drivers/net/mlx4/cq.c @@ -300,7 +300,7 @@ int mlx4_init_cq_table(struct mlx4_dev *dev) INIT_RADIX_TREE(&cq_table->tree, GFP_ATOMIC); err = mlx4_bitmap_init(&cq_table->bitmap, dev->caps.num_cqs, - dev->caps.num_cqs - 1, dev->caps.reserved_cqs); + dev->caps.num_cqs - 1, dev->caps.reserved_cqs, 0); if (err) return err; diff --git a/drivers/net/mlx4/en_cq.c b/drivers/net/mlx4/en_cq.c new file mode 100644 index 000000000000..1368a8010af4 --- /dev/null +++ b/drivers/net/mlx4/en_cq.c @@ -0,0 +1,146 @@ +/* + * Copyright (c) 2007 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#include <linux/mlx4/cq.h> +#include <linux/mlx4/qp.h> +#include <linux/mlx4/cmd.h> + +#include "mlx4_en.h" + +static void mlx4_en_cq_event(struct mlx4_cq *cq, enum mlx4_event event) +{ + return; +} + + +int mlx4_en_create_cq(struct mlx4_en_priv *priv, + struct mlx4_en_cq *cq, + int entries, int ring, enum cq_type mode) +{ + struct mlx4_en_dev *mdev = priv->mdev; + int err; + + cq->size = entries; + if (mode == RX) + cq->buf_size = cq->size * sizeof(struct mlx4_cqe); + else + cq->buf_size = sizeof(struct mlx4_cqe); + + cq->ring = ring; + cq->is_tx = mode; + spin_lock_init(&cq->lock); + + err = mlx4_alloc_hwq_res(mdev->dev, &cq->wqres, + cq->buf_size, 2 * PAGE_SIZE); + if (err) + return err; + + err = mlx4_en_map_buffer(&cq->wqres.buf); + if (err) + mlx4_free_hwq_res(mdev->dev, &cq->wqres, cq->buf_size); + + return err; +} + +int mlx4_en_activate_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq) +{ + struct mlx4_en_dev *mdev = priv->mdev; + int err; + + cq->dev = mdev->pndev[priv->port]; + cq->mcq.set_ci_db = cq->wqres.db.db; + cq->mcq.arm_db = cq->wqres.db.db + 1; + *cq->mcq.set_ci_db = 0; + *cq->mcq.arm_db = 0; + cq->buf = (struct mlx4_cqe *) cq->wqres.buf.direct.buf; + memset(cq->buf, 0, cq->buf_size); + + err = mlx4_cq_alloc(mdev->dev, cq->size, &cq->wqres.mtt, &mdev->priv_uar, + cq->wqres.db.dma, &cq->mcq, cq->is_tx); + if (err) + return err; + + cq->mcq.comp = cq->is_tx ? mlx4_en_tx_irq : mlx4_en_rx_irq; + cq->mcq.event = mlx4_en_cq_event; + + if (cq->is_tx) { + init_timer(&cq->timer); + cq->timer.function = mlx4_en_poll_tx_cq; + cq->timer.data = (unsigned long) cq; + } else { + netif_napi_add(cq->dev, &cq->napi, mlx4_en_poll_rx_cq, 64); + napi_enable(&cq->napi); + } + + return 0; +} + +void mlx4_en_destroy_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq) +{ + struct mlx4_en_dev *mdev = priv->mdev; + + mlx4_en_unmap_buffer(&cq->wqres.buf); + mlx4_free_hwq_res(mdev->dev, &cq->wqres, cq->buf_size); + cq->buf_size = 0; + cq->buf = NULL; +} + +void mlx4_en_deactivate_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq) +{ + struct mlx4_en_dev *mdev = priv->mdev; + + if (cq->is_tx) + del_timer(&cq->timer); + else + napi_disable(&cq->napi); + + mlx4_cq_free(mdev->dev, &cq->mcq); +} + +/* Set rx cq moderation parameters */ +int mlx4_en_set_cq_moder(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq) +{ + return mlx4_cq_modify(priv->mdev->dev, &cq->mcq, + cq->moder_cnt, cq->moder_time); +} + +int mlx4_en_arm_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq) +{ + cq->armed = 1; + mlx4_cq_arm(&cq->mcq, MLX4_CQ_DB_REQ_NOT, priv->mdev->uar_map, + &priv->mdev->uar_lock); + + return 0; +} + + diff --git a/drivers/net/mlx4/en_main.c b/drivers/net/mlx4/en_main.c new file mode 100644 index 000000000000..1b0eebf84f76 --- /dev/null +++ b/drivers/net/mlx4/en_main.c @@ -0,0 +1,254 @@ +/* + * Copyright (c) 2007 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#include <linux/cpumask.h> +#include <linux/module.h> +#include <linux/delay.h> +#include <linux/netdevice.h> +#include <linux/cpumask.h> + +#include <linux/mlx4/driver.h> +#include <linux/mlx4/device.h> +#include <linux/mlx4/cmd.h> + +#include "mlx4_en.h" + +MODULE_AUTHOR("Liran Liss, Yevgeny Petrilin"); +MODULE_DESCRIPTION("Mellanox ConnectX HCA Ethernet driver"); +MODULE_LICENSE("Dual BSD/GPL"); +MODULE_VERSION(DRV_VERSION " ("DRV_RELDATE")"); + +static const char mlx4_en_version[] = + DRV_NAME ": Mellanox ConnectX HCA Ethernet driver v" + DRV_VERSION " (" DRV_RELDATE ")\n"; + +static void mlx4_en_event(struct mlx4_dev *dev, void *endev_ptr, + enum mlx4_dev_event event, int port) +{ + struct mlx4_en_dev *mdev = (struct mlx4_en_dev *) endev_ptr; + struct mlx4_en_priv *priv; + + if (!mdev->pndev[port]) + return; + + priv = netdev_priv(mdev->pndev[port]); + switch (event) { + case MLX4_DEV_EVENT_PORT_UP: + case MLX4_DEV_EVENT_PORT_DOWN: + /* To prevent races, we poll the link state in a separate + task rather than changing it here */ + priv->link_state = event; + queue_work(mdev->workqueue, &priv->linkstate_task); + break; + + case MLX4_DEV_EVENT_CATASTROPHIC_ERROR: + mlx4_err(mdev, "Internal error detected, restarting device\n"); + break; + + default: + mlx4_warn(mdev, "Unhandled event: %d\n", event); + } +} + +static void mlx4_en_remove(struct mlx4_dev *dev, void *endev_ptr) +{ + struct mlx4_en_dev *mdev = endev_ptr; + int i; + + mutex_lock(&mdev->state_lock); + mdev->device_up = false; + mutex_unlock(&mdev->state_lock); + + mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) + if (mdev->pndev[i]) + mlx4_en_destroy_netdev(mdev->pndev[i]); + + flush_workqueue(mdev->workqueue); + destroy_workqueue(mdev->workqueue); + mlx4_mr_free(dev, &mdev->mr); + mlx4_uar_free(dev, &mdev->priv_uar); + mlx4_pd_free(dev, mdev->priv_pdn); + kfree(mdev); +} + +static void *mlx4_en_add(struct mlx4_dev *dev) +{ + static int mlx4_en_version_printed; + struct mlx4_en_dev *mdev; + int i; + int err; + + if (!mlx4_en_version_printed) { + printk(KERN_INFO "%s", mlx4_en_version); + mlx4_en_version_printed++; + } + + mdev = kzalloc(sizeof *mdev, GFP_KERNEL); + if (!mdev) { + dev_err(&dev->pdev->dev, "Device struct alloc failed, " + "aborting.\n"); + err = -ENOMEM; + goto err_free_res; + } + + if (mlx4_pd_alloc(dev, &mdev->priv_pdn)) + goto err_free_dev; + + if (mlx4_uar_alloc(dev, &mdev->priv_uar)) + goto err_pd; + + mdev->uar_map = ioremap(mdev->priv_uar.pfn << PAGE_SHIFT, PAGE_SIZE); + if (!mdev->uar_map) + goto err_uar; + spin_lock_init(&mdev->uar_lock); + + mdev->dev = dev; + mdev->dma_device = &(dev->pdev->dev); + mdev->pdev = dev->pdev; + mdev->device_up = false; + + mdev->LSO_support = !!(dev->caps.flags & (1 << 15)); + if (!mdev->LSO_support) + mlx4_warn(mdev, "LSO not supported, please upgrade to later " + "FW version to enable LSO\n"); + + if (mlx4_mr_alloc(mdev->dev, mdev->priv_pdn, 0, ~0ull, + MLX4_PERM_LOCAL_WRITE | MLX4_PERM_LOCAL_READ, + 0, 0, &mdev->mr)) { + mlx4_err(mdev, "Failed allocating memory region\n"); + goto err_uar; + } + if (mlx4_mr_enable(mdev->dev, &mdev->mr)) { + mlx4_err(mdev, "Failed enabling memory region\n"); + goto err_mr; + } + + /* Build device profile according to supplied module parameters */ + err = mlx4_en_get_profile(mdev); + if (err) { + mlx4_err(mdev, "Bad module parameters, aborting.\n"); + goto err_mr; + } + + /* Configure wich ports to start according to module parameters */ + mdev->port_cnt = 0; + mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) + mdev->port_cnt++; + + /* If we did not receive an explicit number of Rx rings, default to + * the number of completion vectors populated by the mlx4_core */ + mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) { + mlx4_info(mdev, "Using %d tx rings for port:%d\n", + mdev->profile.prof[i].tx_ring_num, i); + if (!mdev->profile.prof[i].rx_ring_num) { + mdev->profile.prof[i].rx_ring_num = 1; + mlx4_info(mdev, "Defaulting to %d rx rings for port:%d\n", + 1, i); + } else + mlx4_info(mdev, "Using %d rx rings for port:%d\n", + mdev->profile.prof[i].rx_ring_num, i); + } + + /* Create our own workqueue for reset/multicast tasks + * Note: we cannot use the shared workqueue because of deadlocks caused + * by the rtnl lock */ + mdev->workqueue = create_singlethread_workqueue("mlx4_en"); + if (!mdev->workqueue) { + err = -ENOMEM; + goto err_close_nic; + } + + /* At this stage all non-port specific tasks are complete: + * mark the card state as up */ + mutex_init(&mdev->state_lock); + mdev->device_up = true; + + /* Setup ports */ + + /* Create a netdev for each port */ + mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) { + mlx4_info(mdev, "Activating port:%d\n", i); + if (mlx4_en_init_netdev(mdev, i, &mdev->profile.prof[i])) { + mdev->pndev[i] = NULL; + goto err_free_netdev; + } + } + return mdev; + + +err_free_netdev: + mlx4_foreach_port(i, dev, MLX4_PORT_TYPE_ETH) { + if (mdev->pndev[i]) + mlx4_en_destroy_netdev(mdev->pndev[i]); + } + + mutex_lock(&mdev->state_lock); + mdev->device_up = false; + mutex_unlock(&mdev->state_lock); + flush_workqueue(mdev->workqueue); + + /* Stop event queue before we drop down to release shared SW state */ + +err_close_nic: + destroy_workqueue(mdev->workqueue); +err_mr: + mlx4_mr_free(dev, &mdev->mr); +err_uar: + mlx4_uar_free(dev, &mdev->priv_uar); +err_pd: + mlx4_pd_free(dev, mdev->priv_pdn); +err_free_dev: + kfree(mdev); +err_free_res: + return NULL; +} + +static struct mlx4_interface mlx4_en_interface = { + .add = mlx4_en_add, + .remove = mlx4_en_remove, + .event = mlx4_en_event, +}; + +static int __init mlx4_en_init(void) +{ + return mlx4_register_interface(&mlx4_en_interface); +} + +static void __exit mlx4_en_cleanup(void) +{ + mlx4_unregister_interface(&mlx4_en_interface); +} + +module_init(mlx4_en_init); +module_exit(mlx4_en_cleanup); + diff --git a/drivers/net/mlx4/en_netdev.c b/drivers/net/mlx4/en_netdev.c new file mode 100644 index 000000000000..a339afbeed38 --- /dev/null +++ b/drivers/net/mlx4/en_netdev.c @@ -0,0 +1,1088 @@ +/* + * Copyright (c) 2007 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#include <linux/etherdevice.h> +#include <linux/tcp.h> +#include <linux/if_vlan.h> +#include <linux/delay.h> + +#include <linux/mlx4/driver.h> +#include <linux/mlx4/device.h> +#include <linux/mlx4/cmd.h> +#include <linux/mlx4/cq.h> + +#include "mlx4_en.h" +#include "en_port.h" + + +static void mlx4_en_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + int err; + + mlx4_dbg(HW, priv, "Registering VLAN group:%p\n", grp); + priv->vlgrp = grp; + + mutex_lock(&mdev->state_lock); + if (mdev->device_up && priv->port_up) { + err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, grp); + if (err) + mlx4_err(mdev, "Failed configuring VLAN filter\n"); + } + mutex_unlock(&mdev->state_lock); +} + +static void mlx4_en_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + int err; + + if (!priv->vlgrp) + return; + + mlx4_dbg(HW, priv, "adding VLAN:%d (vlgrp entry:%p)\n", + vid, vlan_group_get_device(priv->vlgrp, vid)); + + /* Add VID to port VLAN filter */ + mutex_lock(&mdev->state_lock); + if (mdev->device_up && priv->port_up) { + err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, priv->vlgrp); + if (err) + mlx4_err(mdev, "Failed configuring VLAN filter\n"); + } + mutex_unlock(&mdev->state_lock); +} + +static void mlx4_en_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + int err; + + if (!priv->vlgrp) + return; + + mlx4_dbg(HW, priv, "Killing VID:%d (vlgrp:%p vlgrp " + "entry:%p)\n", vid, priv->vlgrp, + vlan_group_get_device(priv->vlgrp, vid)); + vlan_group_set_device(priv->vlgrp, vid, NULL); + + /* Remove VID from port VLAN filter */ + mutex_lock(&mdev->state_lock); + if (mdev->device_up && priv->port_up) { + err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, priv->vlgrp); + if (err) + mlx4_err(mdev, "Failed configuring VLAN filter\n"); + } + mutex_unlock(&mdev->state_lock); +} + +static u64 mlx4_en_mac_to_u64(u8 *addr) +{ + u64 mac = 0; + int i; + + for (i = 0; i < ETH_ALEN; i++) { + mac <<= 8; + mac |= addr[i]; + } + return mac; +} + +static int mlx4_en_set_mac(struct net_device *dev, void *addr) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + struct sockaddr *saddr = addr; + + if (!is_valid_ether_addr(saddr->sa_data)) + return -EADDRNOTAVAIL; + + memcpy(dev->dev_addr, saddr->sa_data, ETH_ALEN); + priv->mac = mlx4_en_mac_to_u64(dev->dev_addr); + queue_work(mdev->workqueue, &priv->mac_task); + return 0; +} + +static void mlx4_en_do_set_mac(struct work_struct *work) +{ + struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv, + mac_task); + struct mlx4_en_dev *mdev = priv->mdev; + int err = 0; + + mutex_lock(&mdev->state_lock); + if (priv->port_up) { + /* Remove old MAC and insert the new one */ + mlx4_unregister_mac(mdev->dev, priv->port, priv->mac_index); + err = mlx4_register_mac(mdev->dev, priv->port, + priv->mac, &priv->mac_index); + if (err) + mlx4_err(mdev, "Failed changing HW MAC address\n"); + } else + mlx4_dbg(HW, priv, "Port is down, exiting...\n"); + + mutex_unlock(&mdev->state_lock); +} + +static void mlx4_en_clear_list(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct dev_mc_list *plist = priv->mc_list; + struct dev_mc_list *next; + + while (plist) { + next = plist->next; + kfree(plist); + plist = next; + } + priv->mc_list = NULL; +} + +static void mlx4_en_cache_mclist(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + struct dev_mc_list *mclist; + struct dev_mc_list *tmp; + struct dev_mc_list *plist = NULL; + + for (mclist = dev->mc_list; mclist; mclist = mclist->next) { + tmp = kmalloc(sizeof(struct dev_mc_list), GFP_ATOMIC); + if (!tmp) { + mlx4_err(mdev, "failed to allocate multicast list\n"); + mlx4_en_clear_list(dev); + return; + } + memcpy(tmp, mclist, sizeof(struct dev_mc_list)); + tmp->next = NULL; + if (plist) + plist->next = tmp; + else + priv->mc_list = tmp; + plist = tmp; + } +} + + +static void mlx4_en_set_multicast(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + + if (!priv->port_up) + return; + + queue_work(priv->mdev->workqueue, &priv->mcast_task); +} + +static void mlx4_en_do_set_multicast(struct work_struct *work) +{ + struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv, + mcast_task); + struct mlx4_en_dev *mdev = priv->mdev; + struct net_device *dev = priv->dev; + struct dev_mc_list *mclist; + u64 mcast_addr = 0; + int err; + + mutex_lock(&mdev->state_lock); + if (!mdev->device_up) { + mlx4_dbg(HW, priv, "Card is not up, ignoring " + "multicast change.\n"); + goto out; + } + if (!priv->port_up) { + mlx4_dbg(HW, priv, "Port is down, ignoring " + "multicast change.\n"); + goto out; + } + + /* + * Promsicuous mode: disable all filters + */ + + if (dev->flags & IFF_PROMISC) { + if (!(priv->flags & MLX4_EN_FLAG_PROMISC)) { + if (netif_msg_rx_status(priv)) + mlx4_warn(mdev, "Port:%d entering promiscuous mode\n", + priv->port); + priv->flags |= MLX4_EN_FLAG_PROMISC; + + /* Enable promiscouos mode */ + err = mlx4_SET_PORT_qpn_calc(mdev->dev, priv->port, + priv->base_qpn, 1); + if (err) + mlx4_err(mdev, "Failed enabling " + "promiscous mode\n"); + + /* Disable port multicast filter (unconditionally) */ + err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0, + 0, MLX4_MCAST_DISABLE); + if (err) + mlx4_err(mdev, "Failed disabling " + "multicast filter\n"); + + /* Disable port VLAN filter */ + err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, NULL); + if (err) + mlx4_err(mdev, "Failed disabling " + "VLAN filter\n"); + } + goto out; + } + + /* + * Not in promiscous mode + */ + + if (priv->flags & MLX4_EN_FLAG_PROMISC) { + if (netif_msg_rx_status(priv)) + mlx4_warn(mdev, "Port:%d leaving promiscuous mode\n", + priv->port); + priv->flags &= ~MLX4_EN_FLAG_PROMISC; + + /* Disable promiscouos mode */ + err = mlx4_SET_PORT_qpn_calc(mdev->dev, priv->port, + priv->base_qpn, 0); + if (err) + mlx4_err(mdev, "Failed disabling promiscous mode\n"); + + /* Enable port VLAN filter */ + err = mlx4_SET_VLAN_FLTR(mdev->dev, priv->port, priv->vlgrp); + if (err) + mlx4_err(mdev, "Failed enabling VLAN filter\n"); + } + + /* Enable/disable the multicast filter according to IFF_ALLMULTI */ + if (dev->flags & IFF_ALLMULTI) { + err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0, + 0, MLX4_MCAST_DISABLE); + if (err) + mlx4_err(mdev, "Failed disabling multicast filter\n"); + } else { + err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0, + 0, MLX4_MCAST_DISABLE); + if (err) + mlx4_err(mdev, "Failed disabling multicast filter\n"); + + /* Flush mcast filter and init it with broadcast address */ + mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, ETH_BCAST, + 1, MLX4_MCAST_CONFIG); + + /* Update multicast list - we cache all addresses so they won't + * change while HW is updated holding the command semaphor */ + netif_tx_lock_bh(dev); + mlx4_en_cache_mclist(dev); + netif_tx_unlock_bh(dev); + for (mclist = priv->mc_list; mclist; mclist = mclist->next) { + mcast_addr = mlx4_en_mac_to_u64(mclist->dmi_addr); + mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, + mcast_addr, 0, MLX4_MCAST_CONFIG); + } + err = mlx4_SET_MCAST_FLTR(mdev->dev, priv->port, 0, + 0, MLX4_MCAST_ENABLE); + if (err) + mlx4_err(mdev, "Failed enabling multicast filter\n"); + + mlx4_en_clear_list(dev); + } +out: + mutex_unlock(&mdev->state_lock); +} + +#ifdef CONFIG_NET_POLL_CONTROLLER +static void mlx4_en_netpoll(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_cq *cq; + unsigned long flags; + int i; + + for (i = 0; i < priv->rx_ring_num; i++) { + cq = &priv->rx_cq[i]; + spin_lock_irqsave(&cq->lock, flags); + napi_synchronize(&cq->napi); + mlx4_en_process_rx_cq(dev, cq, 0); + spin_unlock_irqrestore(&cq->lock, flags); + } +} +#endif + +static void mlx4_en_tx_timeout(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + + if (netif_msg_timer(priv)) + mlx4_warn(mdev, "Tx timeout called on port:%d\n", priv->port); + + if (netif_carrier_ok(dev)) { + priv->port_stats.tx_timeout++; + mlx4_dbg(DRV, priv, "Scheduling watchdog\n"); + queue_work(mdev->workqueue, &priv->watchdog_task); + } +} + + +static struct net_device_stats *mlx4_en_get_stats(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + + spin_lock_bh(&priv->stats_lock); + memcpy(&priv->ret_stats, &priv->stats, sizeof(priv->stats)); + spin_unlock_bh(&priv->stats_lock); + + return &priv->ret_stats; +} + +static void mlx4_en_set_default_moderation(struct mlx4_en_priv *priv) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_cq *cq; + int i; + + /* If we haven't received a specific coalescing setting + * (module param), we set the moderation paramters as follows: + * - moder_cnt is set to the number of mtu sized packets to + * satisfy our coelsing target. + * - moder_time is set to a fixed value. + */ + priv->rx_frames = (mdev->profile.rx_moder_cnt == + MLX4_EN_AUTO_CONF) ? + MLX4_EN_RX_COAL_TARGET / + priv->dev->mtu + 1 : + mdev->profile.rx_moder_cnt; + priv->rx_usecs = (mdev->profile.rx_moder_time == + MLX4_EN_AUTO_CONF) ? + MLX4_EN_RX_COAL_TIME : + mdev->profile.rx_moder_time; + mlx4_dbg(INTR, priv, "Default coalesing params for mtu:%d - " + "rx_frames:%d rx_usecs:%d\n", + priv->dev->mtu, priv->rx_frames, priv->rx_usecs); + + /* Setup cq moderation params */ + for (i = 0; i < priv->rx_ring_num; i++) { + cq = &priv->rx_cq[i]; + cq->moder_cnt = priv->rx_frames; + cq->moder_time = priv->rx_usecs; + } + + for (i = 0; i < priv->tx_ring_num; i++) { + cq = &priv->tx_cq[i]; + cq->moder_cnt = MLX4_EN_TX_COAL_PKTS; + cq->moder_time = MLX4_EN_TX_COAL_TIME; + } + + /* Reset auto-moderation params */ + priv->pkt_rate_low = MLX4_EN_RX_RATE_LOW; + priv->rx_usecs_low = MLX4_EN_RX_COAL_TIME_LOW; + priv->pkt_rate_high = MLX4_EN_RX_RATE_HIGH; + priv->rx_usecs_high = MLX4_EN_RX_COAL_TIME_HIGH; + priv->sample_interval = MLX4_EN_SAMPLE_INTERVAL; + priv->adaptive_rx_coal = mdev->profile.auto_moder; + priv->last_moder_time = MLX4_EN_AUTO_CONF; + priv->last_moder_jiffies = 0; + priv->last_moder_packets = 0; + priv->last_moder_tx_packets = 0; + priv->last_moder_bytes = 0; +} + +static void mlx4_en_auto_moderation(struct mlx4_en_priv *priv) +{ + unsigned long period = (unsigned long) (jiffies - priv->last_moder_jiffies); + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_cq *cq; + unsigned long packets; + unsigned long rate; + unsigned long avg_pkt_size; + unsigned long rx_packets; + unsigned long rx_bytes; + unsigned long tx_packets; + unsigned long tx_pkt_diff; + unsigned long rx_pkt_diff; + int moder_time; + int i, err; + + if (!priv->adaptive_rx_coal || period < priv->sample_interval * HZ) + return; + + spin_lock_bh(&priv->stats_lock); + rx_packets = priv->stats.rx_packets; + rx_bytes = priv->stats.rx_bytes; + tx_packets = priv->stats.tx_packets; + spin_unlock_bh(&priv->stats_lock); + + if (!priv->last_moder_jiffies || !period) + goto out; + + tx_pkt_diff = ((unsigned long) (tx_packets - + priv->last_moder_tx_packets)); + rx_pkt_diff = ((unsigned long) (rx_packets - + priv->last_moder_packets)); + packets = max(tx_pkt_diff, rx_pkt_diff); + rate = packets * HZ / period; + avg_pkt_size = packets ? ((unsigned long) (rx_bytes - + priv->last_moder_bytes)) / packets : 0; + + /* Apply auto-moderation only when packet rate exceeds a rate that + * it matters */ + if (rate > MLX4_EN_RX_RATE_THRESH) { + /* If tx and rx packet rates are not balanced, assume that + * traffic is mainly BW bound and apply maximum moderation. + * Otherwise, moderate according to packet rate */ + if (2 * tx_pkt_diff > 3 * rx_pkt_diff || + 2 * rx_pkt_diff > 3 * tx_pkt_diff) { + moder_time = priv->rx_usecs_high; + } else { + if (rate < priv->pkt_rate_low) + moder_time = priv->rx_usecs_low; + else if (rate > priv->pkt_rate_high) + moder_time = priv->rx_usecs_high; + else + moder_time = (rate - priv->pkt_rate_low) * + (priv->rx_usecs_high - priv->rx_usecs_low) / + (priv->pkt_rate_high - priv->pkt_rate_low) + + priv->rx_usecs_low; + } + } else { + /* When packet rate is low, use default moderation rather than + * 0 to prevent interrupt storms if traffic suddenly increases */ + moder_time = priv->rx_usecs; + } + + mlx4_dbg(INTR, priv, "tx rate:%lu rx_rate:%lu\n", + tx_pkt_diff * HZ / period, rx_pkt_diff * HZ / period); + + mlx4_dbg(INTR, priv, "Rx moder_time changed from:%d to %d period:%lu " + "[jiff] packets:%lu avg_pkt_size:%lu rate:%lu [p/s])\n", + priv->last_moder_time, moder_time, period, packets, + avg_pkt_size, rate); + + if (moder_time != priv->last_moder_time) { + priv->last_moder_time = moder_time; + for (i = 0; i < priv->rx_ring_num; i++) { + cq = &priv->rx_cq[i]; + cq->moder_time = moder_time; + err = mlx4_en_set_cq_moder(priv, cq); + if (err) { + mlx4_err(mdev, "Failed modifying moderation for cq:%d " + "on port:%d\n", i, priv->port); + break; + } + } + } + +out: + priv->last_moder_packets = rx_packets; + priv->last_moder_tx_packets = tx_packets; + priv->last_moder_bytes = rx_bytes; + priv->last_moder_jiffies = jiffies; +} + +static void mlx4_en_do_get_stats(struct work_struct *work) +{ + struct delayed_work *delay = container_of(work, struct delayed_work, work); + struct mlx4_en_priv *priv = container_of(delay, struct mlx4_en_priv, + stats_task); + struct mlx4_en_dev *mdev = priv->mdev; + int err; + + err = mlx4_en_DUMP_ETH_STATS(mdev, priv->port, 0); + if (err) + mlx4_dbg(HW, priv, "Could not update stats for " + "port:%d\n", priv->port); + + mutex_lock(&mdev->state_lock); + if (mdev->device_up) { + if (priv->port_up) + mlx4_en_auto_moderation(priv); + + queue_delayed_work(mdev->workqueue, &priv->stats_task, STATS_DELAY); + } + mutex_unlock(&mdev->state_lock); +} + +static void mlx4_en_linkstate(struct work_struct *work) +{ + struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv, + linkstate_task); + struct mlx4_en_dev *mdev = priv->mdev; + int linkstate = priv->link_state; + + mutex_lock(&mdev->state_lock); + /* If observable port state changed set carrier state and + * report to system log */ + if (priv->last_link_state != linkstate) { + if (linkstate == MLX4_DEV_EVENT_PORT_DOWN) { + if (netif_msg_link(priv)) + mlx4_info(mdev, "Port %d - link down\n", priv->port); + netif_carrier_off(priv->dev); + } else { + if (netif_msg_link(priv)) + mlx4_info(mdev, "Port %d - link up\n", priv->port); + netif_carrier_on(priv->dev); + } + } + priv->last_link_state = linkstate; + mutex_unlock(&mdev->state_lock); +} + + +static int mlx4_en_start_port(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_cq *cq; + struct mlx4_en_tx_ring *tx_ring; + struct mlx4_en_rx_ring *rx_ring; + int rx_index = 0; + int tx_index = 0; + u16 stride; + int err = 0; + int i; + int j; + + if (priv->port_up) { + mlx4_dbg(DRV, priv, "start port called while port already up\n"); + return 0; + } + + /* Calculate Rx buf size */ + dev->mtu = min(dev->mtu, priv->max_mtu); + mlx4_en_calc_rx_buf(dev); + mlx4_dbg(DRV, priv, "Rx buf size:%d\n", priv->rx_skb_size); + stride = roundup_pow_of_two(sizeof(struct mlx4_en_rx_desc) + + DS_SIZE * priv->num_frags); + /* Configure rx cq's and rings */ + for (i = 0; i < priv->rx_ring_num; i++) { + cq = &priv->rx_cq[i]; + rx_ring = &priv->rx_ring[i]; + + err = mlx4_en_activate_cq(priv, cq); + if (err) { + mlx4_err(mdev, "Failed activating Rx CQ\n"); + goto rx_err; + } + for (j = 0; j < cq->size; j++) + cq->buf[j].owner_sr_opcode = MLX4_CQE_OWNER_MASK; + err = mlx4_en_set_cq_moder(priv, cq); + if (err) { + mlx4_err(mdev, "Failed setting cq moderation parameters"); + mlx4_en_deactivate_cq(priv, cq); + goto cq_err; + } + mlx4_en_arm_cq(priv, cq); + + ++rx_index; + } + + err = mlx4_en_activate_rx_rings(priv); + if (err) { + mlx4_err(mdev, "Failed to activate RX rings\n"); + goto cq_err; + } + + err = mlx4_en_config_rss_steer(priv); + if (err) { + mlx4_err(mdev, "Failed configuring rss steering\n"); + goto rx_err; + } + + /* Configure tx cq's and rings */ + for (i = 0; i < priv->tx_ring_num; i++) { + /* Configure cq */ + cq = &priv->tx_cq[i]; + err = mlx4_en_activate_cq(priv, cq); + if (err) { + mlx4_err(mdev, "Failed allocating Tx CQ\n"); + goto tx_err; + } + err = mlx4_en_set_cq_moder(priv, cq); + if (err) { + mlx4_err(mdev, "Failed setting cq moderation parameters"); + mlx4_en_deactivate_cq(priv, cq); + goto tx_err; + } + mlx4_dbg(DRV, priv, "Resetting index of collapsed CQ:%d to -1\n", i); + cq->buf->wqe_index = cpu_to_be16(0xffff); + + /* Configure ring */ + tx_ring = &priv->tx_ring[i]; + err = mlx4_en_activate_tx_ring(priv, tx_ring, cq->mcq.cqn, + priv->rx_ring[0].srq.srqn); + if (err) { + mlx4_err(mdev, "Failed allocating Tx ring\n"); + mlx4_en_deactivate_cq(priv, cq); + goto tx_err; + } + /* Set initial ownership of all Tx TXBBs to SW (1) */ + for (j = 0; j < tx_ring->buf_size; j += STAMP_STRIDE) + *((u32 *) (tx_ring->buf + j)) = 0xffffffff; + ++tx_index; + } + + /* Configure port */ + err = mlx4_SET_PORT_general(mdev->dev, priv->port, + priv->rx_skb_size + ETH_FCS_LEN, + mdev->profile.tx_pause, + mdev->profile.tx_ppp, + mdev->profile.rx_pause, + mdev->profile.rx_ppp); + if (err) { + mlx4_err(mdev, "Failed setting port general configurations" + " for port %d, with error %d\n", priv->port, err); + goto tx_err; + } + /* Set default qp number */ + err = mlx4_SET_PORT_qpn_calc(mdev->dev, priv->port, priv->base_qpn, 0); + if (err) { + mlx4_err(mdev, "Failed setting default qp numbers\n"); + goto tx_err; + } + /* Set port mac number */ + mlx4_dbg(DRV, priv, "Setting mac for port %d\n", priv->port); + err = mlx4_register_mac(mdev->dev, priv->port, + priv->mac, &priv->mac_index); + if (err) { + mlx4_err(mdev, "Failed setting port mac\n"); + goto tx_err; + } + + /* Init port */ + mlx4_dbg(HW, priv, "Initializing port\n"); + err = mlx4_INIT_PORT(mdev->dev, priv->port); + if (err) { + mlx4_err(mdev, "Failed Initializing port\n"); + goto mac_err; + } + + /* Schedule multicast task to populate multicast list */ + queue_work(mdev->workqueue, &priv->mcast_task); + + priv->port_up = true; + netif_start_queue(dev); + return 0; + +mac_err: + mlx4_unregister_mac(mdev->dev, priv->port, priv->mac_index); +tx_err: + while (tx_index--) { + mlx4_en_deactivate_tx_ring(priv, &priv->tx_ring[tx_index]); + mlx4_en_deactivate_cq(priv, &priv->tx_cq[tx_index]); + } + + mlx4_en_release_rss_steer(priv); +rx_err: + for (i = 0; i < priv->rx_ring_num; i++) + mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[rx_index]); +cq_err: + while (rx_index--) + mlx4_en_deactivate_cq(priv, &priv->rx_cq[rx_index]); + + return err; /* need to close devices */ +} + + +static void mlx4_en_stop_port(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + int i; + + if (!priv->port_up) { + mlx4_dbg(DRV, priv, "stop port (%d) called while port already down\n", + priv->port); + return; + } + netif_stop_queue(dev); + + /* Synchronize with tx routine */ + netif_tx_lock_bh(dev); + priv->port_up = false; + netif_tx_unlock_bh(dev); + + /* close port*/ + mlx4_CLOSE_PORT(mdev->dev, priv->port); + + /* Unregister Mac address for the port */ + mlx4_unregister_mac(mdev->dev, priv->port, priv->mac_index); + + /* Free TX Rings */ + for (i = 0; i < priv->tx_ring_num; i++) { + mlx4_en_deactivate_tx_ring(priv, &priv->tx_ring[i]); + mlx4_en_deactivate_cq(priv, &priv->tx_cq[i]); + } + msleep(10); + + for (i = 0; i < priv->tx_ring_num; i++) + mlx4_en_free_tx_buf(dev, &priv->tx_ring[i]); + + /* Free RSS qps */ + mlx4_en_release_rss_steer(priv); + + /* Free RX Rings */ + for (i = 0; i < priv->rx_ring_num; i++) { + mlx4_en_deactivate_rx_ring(priv, &priv->rx_ring[i]); + while (test_bit(NAPI_STATE_SCHED, &priv->rx_cq[i].napi.state)) + msleep(1); + mlx4_en_deactivate_cq(priv, &priv->rx_cq[i]); + } +} + +static void mlx4_en_restart(struct work_struct *work) +{ + struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv, + watchdog_task); + struct mlx4_en_dev *mdev = priv->mdev; + struct net_device *dev = priv->dev; + + mlx4_dbg(DRV, priv, "Watchdog task called for port %d\n", priv->port); + mlx4_en_stop_port(dev); + if (mlx4_en_start_port(dev)) + mlx4_err(mdev, "Failed restarting port %d\n", priv->port); +} + + +static int mlx4_en_open(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + int i; + int err = 0; + + mutex_lock(&mdev->state_lock); + + if (!mdev->device_up) { + mlx4_err(mdev, "Cannot open - device down/disabled\n"); + err = -EBUSY; + goto out; + } + + /* Reset HW statistics and performance counters */ + if (mlx4_en_DUMP_ETH_STATS(mdev, priv->port, 1)) + mlx4_dbg(HW, priv, "Failed dumping statistics\n"); + + memset(&priv->stats, 0, sizeof(priv->stats)); + memset(&priv->pstats, 0, sizeof(priv->pstats)); + + for (i = 0; i < priv->tx_ring_num; i++) { + priv->tx_ring[i].bytes = 0; + priv->tx_ring[i].packets = 0; + } + for (i = 0; i < priv->rx_ring_num; i++) { + priv->rx_ring[i].bytes = 0; + priv->rx_ring[i].packets = 0; + } + + mlx4_en_set_default_moderation(priv); + err = mlx4_en_start_port(dev); + if (err) + mlx4_err(mdev, "Failed starting port:%d\n", priv->port); + +out: + mutex_unlock(&mdev->state_lock); + return err; +} + + +static int mlx4_en_close(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + + if (netif_msg_ifdown(priv)) + mlx4_info(mdev, "Close called for port:%d\n", priv->port); + + mutex_lock(&mdev->state_lock); + + mlx4_en_stop_port(dev); + netif_carrier_off(dev); + + mutex_unlock(&mdev->state_lock); + return 0; +} + +static void mlx4_en_free_resources(struct mlx4_en_priv *priv) +{ + int i; + + for (i = 0; i < priv->tx_ring_num; i++) { + if (priv->tx_ring[i].tx_info) + mlx4_en_destroy_tx_ring(priv, &priv->tx_ring[i]); + if (priv->tx_cq[i].buf) + mlx4_en_destroy_cq(priv, &priv->tx_cq[i]); + } + + for (i = 0; i < priv->rx_ring_num; i++) { + if (priv->rx_ring[i].rx_info) + mlx4_en_destroy_rx_ring(priv, &priv->rx_ring[i]); + if (priv->rx_cq[i].buf) + mlx4_en_destroy_cq(priv, &priv->rx_cq[i]); + } +} + +static int mlx4_en_alloc_resources(struct mlx4_en_priv *priv) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_port_profile *prof = priv->prof; + int i; + + /* Create tx Rings */ + for (i = 0; i < priv->tx_ring_num; i++) { + if (mlx4_en_create_cq(priv, &priv->tx_cq[i], + prof->tx_ring_size, i, TX)) + goto err; + + if (mlx4_en_create_tx_ring(priv, &priv->tx_ring[i], + prof->tx_ring_size, TXBB_SIZE)) + goto err; + } + + /* Create rx Rings */ + for (i = 0; i < priv->rx_ring_num; i++) { + if (mlx4_en_create_cq(priv, &priv->rx_cq[i], + prof->rx_ring_size, i, RX)) + goto err; + + if (mlx4_en_create_rx_ring(priv, &priv->rx_ring[i], + prof->rx_ring_size, priv->stride)) + goto err; + } + + return 0; + +err: + mlx4_err(mdev, "Failed to allocate NIC resources\n"); + return -ENOMEM; +} + + +void mlx4_en_destroy_netdev(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + + mlx4_dbg(DRV, priv, "Destroying netdev on port:%d\n", priv->port); + + /* Unregister device - this will close the port if it was up */ + if (priv->registered) + unregister_netdev(dev); + + if (priv->allocated) + mlx4_free_hwq_res(mdev->dev, &priv->res, MLX4_EN_PAGE_SIZE); + + cancel_delayed_work(&priv->stats_task); + cancel_delayed_work(&priv->refill_task); + /* flush any pending task for this netdev */ + flush_workqueue(mdev->workqueue); + + /* Detach the netdev so tasks would not attempt to access it */ + mutex_lock(&mdev->state_lock); + mdev->pndev[priv->port] = NULL; + mutex_unlock(&mdev->state_lock); + + mlx4_en_free_resources(priv); + free_netdev(dev); +} + +static int mlx4_en_change_mtu(struct net_device *dev, int new_mtu) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + int err = 0; + + mlx4_dbg(DRV, priv, "Change MTU called - current:%d new:%d\n", + dev->mtu, new_mtu); + + if ((new_mtu < MLX4_EN_MIN_MTU) || (new_mtu > priv->max_mtu)) { + mlx4_err(mdev, "Bad MTU size:%d.\n", new_mtu); + return -EPERM; + } + dev->mtu = new_mtu; + + if (netif_running(dev)) { + mutex_lock(&mdev->state_lock); + if (!mdev->device_up) { + /* NIC is probably restarting - let watchdog task reset + * the port */ + mlx4_dbg(DRV, priv, "Change MTU called with card down!?\n"); + } else { + mlx4_en_stop_port(dev); + mlx4_en_set_default_moderation(priv); + err = mlx4_en_start_port(dev); + if (err) { + mlx4_err(mdev, "Failed restarting port:%d\n", + priv->port); + queue_work(mdev->workqueue, &priv->watchdog_task); + } + } + mutex_unlock(&mdev->state_lock); + } + return 0; +} + +int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, + struct mlx4_en_port_profile *prof) +{ + struct net_device *dev; + struct mlx4_en_priv *priv; + int i; + int err; + + dev = alloc_etherdev(sizeof(struct mlx4_en_priv)); + if (dev == NULL) { + mlx4_err(mdev, "Net device allocation failed\n"); + return -ENOMEM; + } + + SET_NETDEV_DEV(dev, &mdev->dev->pdev->dev); + + /* + * Initialize driver private data + */ + + priv = netdev_priv(dev); + memset(priv, 0, sizeof(struct mlx4_en_priv)); + priv->dev = dev; + priv->mdev = mdev; + priv->prof = prof; + priv->port = port; + priv->port_up = false; + priv->rx_csum = 1; + priv->flags = prof->flags; + priv->tx_ring_num = prof->tx_ring_num; + priv->rx_ring_num = prof->rx_ring_num; + priv->mc_list = NULL; + priv->mac_index = -1; + priv->msg_enable = MLX4_EN_MSG_LEVEL; + spin_lock_init(&priv->stats_lock); + INIT_WORK(&priv->mcast_task, mlx4_en_do_set_multicast); + INIT_WORK(&priv->mac_task, mlx4_en_do_set_mac); + INIT_DELAYED_WORK(&priv->refill_task, mlx4_en_rx_refill); + INIT_WORK(&priv->watchdog_task, mlx4_en_restart); + INIT_WORK(&priv->linkstate_task, mlx4_en_linkstate); + INIT_DELAYED_WORK(&priv->stats_task, mlx4_en_do_get_stats); + + /* Query for default mac and max mtu */ + priv->max_mtu = mdev->dev->caps.eth_mtu_cap[priv->port]; + priv->mac = mdev->dev->caps.def_mac[priv->port]; + if (ILLEGAL_MAC(priv->mac)) { + mlx4_err(mdev, "Port: %d, invalid mac burned: 0x%llx, quiting\n", + priv->port, priv->mac); + err = -EINVAL; + goto out; + } + + priv->stride = roundup_pow_of_two(sizeof(struct mlx4_en_rx_desc) + + DS_SIZE * MLX4_EN_MAX_RX_FRAGS); + err = mlx4_en_alloc_resources(priv); + if (err) + goto out; + + /* Populate Rx default RSS mappings */ + mlx4_en_set_default_rss_map(priv, &priv->rss_map, priv->rx_ring_num * + RSS_FACTOR, priv->rx_ring_num); + /* Allocate page for receive rings */ + err = mlx4_alloc_hwq_res(mdev->dev, &priv->res, + MLX4_EN_PAGE_SIZE, MLX4_EN_PAGE_SIZE); + if (err) { + mlx4_err(mdev, "Failed to allocate page for rx qps\n"); + goto out; + } + priv->allocated = 1; + + /* Populate Tx priority mappings */ + mlx4_en_set_prio_map(priv, priv->tx_prio_map, prof->tx_ring_num); + + /* + * Initialize netdev entry points + */ + + dev->open = &mlx4_en_open; + dev->stop = &mlx4_en_close; + dev->hard_start_xmit = &mlx4_en_xmit; + dev->get_stats = &mlx4_en_get_stats; + dev->set_multicast_list = &mlx4_en_set_multicast; + dev->set_mac_address = &mlx4_en_set_mac; + dev->change_mtu = &mlx4_en_change_mtu; + dev->tx_timeout = &mlx4_en_tx_timeout; + dev->watchdog_timeo = MLX4_EN_WATCHDOG_TIMEOUT; + dev->vlan_rx_register = mlx4_en_vlan_rx_register; + dev->vlan_rx_add_vid = mlx4_en_vlan_rx_add_vid; + dev->vlan_rx_kill_vid = mlx4_en_vlan_rx_kill_vid; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = mlx4_en_netpoll; +#endif + SET_ETHTOOL_OPS(dev, &mlx4_en_ethtool_ops); + + /* Set defualt MAC */ + dev->addr_len = ETH_ALEN; + for (i = 0; i < ETH_ALEN; i++) + dev->dev_addr[ETH_ALEN - 1 - i] = + (u8) (priv->mac >> (8 * i)); + + /* + * Set driver features + */ + dev->features |= NETIF_F_SG; + dev->features |= NETIF_F_HW_CSUM; + dev->features |= NETIF_F_HIGHDMA; + dev->features |= NETIF_F_HW_VLAN_TX | + NETIF_F_HW_VLAN_RX | + NETIF_F_HW_VLAN_FILTER; + if (mdev->profile.num_lro) + dev->features |= NETIF_F_LRO; + if (mdev->LSO_support) { + dev->features |= NETIF_F_TSO; + dev->features |= NETIF_F_TSO6; + } + + mdev->pndev[port] = dev; + + netif_carrier_off(dev); + err = register_netdev(dev); + if (err) { + mlx4_err(mdev, "Netdev registration failed\n"); + goto out; + } + priv->registered = 1; + queue_delayed_work(mdev->workqueue, &priv->stats_task, STATS_DELAY); + return 0; + +out: + mlx4_en_destroy_netdev(dev); + return err; +} + diff --git a/drivers/net/mlx4/en_params.c b/drivers/net/mlx4/en_params.c new file mode 100644 index 000000000000..c2e69b1bcd0a --- /dev/null +++ b/drivers/net/mlx4/en_params.c @@ -0,0 +1,480 @@ +/* + * Copyright (c) 2007 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#include <linux/kernel.h> +#include <linux/ethtool.h> +#include <linux/netdevice.h> + +#include "mlx4_en.h" +#include "en_port.h" + +#define MLX4_EN_PARM_INT(X, def_val, desc) \ + static unsigned int X = def_val;\ + module_param(X , uint, 0444); \ + MODULE_PARM_DESC(X, desc); + + +/* + * Device scope module parameters + */ + + +/* Use a XOR rathern than Toeplitz hash function for RSS */ +MLX4_EN_PARM_INT(rss_xor, 0, "Use XOR hash function for RSS"); + +/* RSS hash type mask - default to <saddr, daddr, sport, dport> */ +MLX4_EN_PARM_INT(rss_mask, 0xf, "RSS hash type bitmask"); + +/* Number of LRO sessions per Rx ring (rounded up to a power of two) */ +MLX4_EN_PARM_INT(num_lro, MLX4_EN_MAX_LRO_DESCRIPTORS, + "Number of LRO sessions per ring or disabled (0)"); + +/* Priority pausing */ +MLX4_EN_PARM_INT(pptx, MLX4_EN_DEF_TX_PAUSE, + "Pause policy on TX: 0 never generate pause frames " + "1 generate pause frames according to RX buffer threshold"); +MLX4_EN_PARM_INT(pprx, MLX4_EN_DEF_RX_PAUSE, + "Pause policy on RX: 0 ignore received pause frames " + "1 respect received pause frames"); +MLX4_EN_PARM_INT(pfctx, 0, "Priority based Flow Control policy on TX[7:0]." + " Per priority bit mask"); +MLX4_EN_PARM_INT(pfcrx, 0, "Priority based Flow Control policy on RX[7:0]." + " Per priority bit mask"); + +/* Interrupt moderation tunning */ +MLX4_EN_PARM_INT(rx_moder_cnt, MLX4_EN_AUTO_CONF, + "Max coalesced descriptors for Rx interrupt moderation"); +MLX4_EN_PARM_INT(rx_moder_time, MLX4_EN_AUTO_CONF, + "Timeout following last packet for Rx interrupt moderation"); +MLX4_EN_PARM_INT(auto_moder, 1, "Enable dynamic interrupt moderation"); + +MLX4_EN_PARM_INT(rx_ring_num1, 0, "Number or Rx rings for port 1 (0 = #cores)"); +MLX4_EN_PARM_INT(rx_ring_num2, 0, "Number or Rx rings for port 2 (0 = #cores)"); + +MLX4_EN_PARM_INT(tx_ring_size1, MLX4_EN_AUTO_CONF, "Tx ring size for port 1"); +MLX4_EN_PARM_INT(tx_ring_size2, MLX4_EN_AUTO_CONF, "Tx ring size for port 2"); +MLX4_EN_PARM_INT(rx_ring_size1, MLX4_EN_AUTO_CONF, "Rx ring size for port 1"); +MLX4_EN_PARM_INT(rx_ring_size2, MLX4_EN_AUTO_CONF, "Rx ring size for port 2"); + + +int mlx4_en_get_profile(struct mlx4_en_dev *mdev) +{ + struct mlx4_en_profile *params = &mdev->profile; + + params->rx_moder_cnt = min_t(int, rx_moder_cnt, MLX4_EN_AUTO_CONF); + params->rx_moder_time = min_t(int, rx_moder_time, MLX4_EN_AUTO_CONF); + params->auto_moder = auto_moder; + params->rss_xor = (rss_xor != 0); + params->rss_mask = rss_mask & 0x1f; + params->num_lro = min_t(int, num_lro , MLX4_EN_MAX_LRO_DESCRIPTORS); + params->rx_pause = pprx; + params->rx_ppp = pfcrx; + params->tx_pause = pptx; + params->tx_ppp = pfctx; + if (params->rx_ppp || params->tx_ppp) { + params->prof[1].tx_ring_num = MLX4_EN_TX_RING_NUM; + params->prof[2].tx_ring_num = MLX4_EN_TX_RING_NUM; + } else { + params->prof[1].tx_ring_num = 1; + params->prof[2].tx_ring_num = 1; + } + params->prof[1].rx_ring_num = min_t(int, rx_ring_num1, MAX_RX_RINGS); + params->prof[2].rx_ring_num = min_t(int, rx_ring_num2, MAX_RX_RINGS); + + if (tx_ring_size1 == MLX4_EN_AUTO_CONF) + tx_ring_size1 = MLX4_EN_DEF_TX_RING_SIZE; + params->prof[1].tx_ring_size = + (tx_ring_size1 < MLX4_EN_MIN_TX_SIZE) ? + MLX4_EN_MIN_TX_SIZE : roundup_pow_of_two(tx_ring_size1); + + if (tx_ring_size2 == MLX4_EN_AUTO_CONF) + tx_ring_size2 = MLX4_EN_DEF_TX_RING_SIZE; + params->prof[2].tx_ring_size = + (tx_ring_size2 < MLX4_EN_MIN_TX_SIZE) ? + MLX4_EN_MIN_TX_SIZE : roundup_pow_of_two(tx_ring_size2); + + if (rx_ring_size1 == MLX4_EN_AUTO_CONF) + rx_ring_size1 = MLX4_EN_DEF_RX_RING_SIZE; + params->prof[1].rx_ring_size = + (rx_ring_size1 < MLX4_EN_MIN_RX_SIZE) ? + MLX4_EN_MIN_RX_SIZE : roundup_pow_of_two(rx_ring_size1); + + if (rx_ring_size2 == MLX4_EN_AUTO_CONF) + rx_ring_size2 = MLX4_EN_DEF_RX_RING_SIZE; + params->prof[2].rx_ring_size = + (rx_ring_size2 < MLX4_EN_MIN_RX_SIZE) ? + MLX4_EN_MIN_RX_SIZE : roundup_pow_of_two(rx_ring_size2); + return 0; +} + + +/* + * Ethtool support + */ + +static void mlx4_en_update_lro_stats(struct mlx4_en_priv *priv) +{ + int i; + + priv->port_stats.lro_aggregated = 0; + priv->port_stats.lro_flushed = 0; + priv->port_stats.lro_no_desc = 0; + + for (i = 0; i < priv->rx_ring_num; i++) { + priv->port_stats.lro_aggregated += priv->rx_ring[i].lro.stats.aggregated; + priv->port_stats.lro_flushed += priv->rx_ring[i].lro.stats.flushed; + priv->port_stats.lro_no_desc += priv->rx_ring[i].lro.stats.no_desc; + } +} + +static void +mlx4_en_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *drvinfo) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + + sprintf(drvinfo->driver, DRV_NAME " (%s)", mdev->dev->board_id); + strncpy(drvinfo->version, DRV_VERSION " (" DRV_RELDATE ")", 32); + sprintf(drvinfo->fw_version, "%d.%d.%d", + (u16) (mdev->dev->caps.fw_ver >> 32), + (u16) ((mdev->dev->caps.fw_ver >> 16) & 0xffff), + (u16) (mdev->dev->caps.fw_ver & 0xffff)); + strncpy(drvinfo->bus_info, pci_name(mdev->dev->pdev), 32); + drvinfo->n_stats = 0; + drvinfo->regdump_len = 0; + drvinfo->eedump_len = 0; +} + +static u32 mlx4_en_get_tso(struct net_device *dev) +{ + return (dev->features & NETIF_F_TSO) != 0; +} + +static int mlx4_en_set_tso(struct net_device *dev, u32 data) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + + if (data) { + if (!priv->mdev->LSO_support) + return -EPERM; + dev->features |= (NETIF_F_TSO | NETIF_F_TSO6); + } else + dev->features &= ~(NETIF_F_TSO | NETIF_F_TSO6); + return 0; +} + +static u32 mlx4_en_get_rx_csum(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + return priv->rx_csum; +} + +static int mlx4_en_set_rx_csum(struct net_device *dev, u32 data) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + priv->rx_csum = (data != 0); + return 0; +} + +static const char main_strings[][ETH_GSTRING_LEN] = { + "rx_packets", "tx_packets", "rx_bytes", "tx_bytes", "rx_errors", + "tx_errors", "rx_dropped", "tx_dropped", "multicast", "collisions", + "rx_length_errors", "rx_over_errors", "rx_crc_errors", + "rx_frame_errors", "rx_fifo_errors", "rx_missed_errors", + "tx_aborted_errors", "tx_carrier_errors", "tx_fifo_errors", + "tx_heartbeat_errors", "tx_window_errors", + + /* port statistics */ + "lro_aggregated", "lro_flushed", "lro_no_desc", "tso_packets", + "queue_stopped", "wake_queue", "tx_timeout", "rx_alloc_failed", + "rx_csum_good", "rx_csum_none", "tx_chksum_offload", + + /* packet statistics */ + "broadcast", "rx_prio_0", "rx_prio_1", "rx_prio_2", "rx_prio_3", + "rx_prio_4", "rx_prio_5", "rx_prio_6", "rx_prio_7", "tx_prio_0", + "tx_prio_1", "tx_prio_2", "tx_prio_3", "tx_prio_4", "tx_prio_5", + "tx_prio_6", "tx_prio_7", +}; +#define NUM_MAIN_STATS 21 +#define NUM_ALL_STATS (NUM_MAIN_STATS + NUM_PORT_STATS + NUM_PKT_STATS + NUM_PERF_STATS) + +static u32 mlx4_en_get_msglevel(struct net_device *dev) +{ + return ((struct mlx4_en_priv *) netdev_priv(dev))->msg_enable; +} + +static void mlx4_en_set_msglevel(struct net_device *dev, u32 val) +{ + ((struct mlx4_en_priv *) netdev_priv(dev))->msg_enable = val; +} + +static void mlx4_en_get_wol(struct net_device *netdev, + struct ethtool_wolinfo *wol) +{ + wol->supported = 0; + wol->wolopts = 0; + + return; +} + +static int mlx4_en_get_sset_count(struct net_device *dev, int sset) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + + if (sset != ETH_SS_STATS) + return -EOPNOTSUPP; + + return NUM_ALL_STATS + (priv->tx_ring_num + priv->rx_ring_num) * 2; +} + +static void mlx4_en_get_ethtool_stats(struct net_device *dev, + struct ethtool_stats *stats, uint64_t *data) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + int index = 0; + int i; + + spin_lock_bh(&priv->stats_lock); + + mlx4_en_update_lro_stats(priv); + + for (i = 0; i < NUM_MAIN_STATS; i++) + data[index++] = ((unsigned long *) &priv->stats)[i]; + for (i = 0; i < NUM_PORT_STATS; i++) + data[index++] = ((unsigned long *) &priv->port_stats)[i]; + for (i = 0; i < priv->tx_ring_num; i++) { + data[index++] = priv->tx_ring[i].packets; + data[index++] = priv->tx_ring[i].bytes; + } + for (i = 0; i < priv->rx_ring_num; i++) { + data[index++] = priv->rx_ring[i].packets; + data[index++] = priv->rx_ring[i].bytes; + } + for (i = 0; i < NUM_PKT_STATS; i++) + data[index++] = ((unsigned long *) &priv->pkstats)[i]; + spin_unlock_bh(&priv->stats_lock); + +} + +static void mlx4_en_get_strings(struct net_device *dev, + uint32_t stringset, uint8_t *data) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + int index = 0; + int i; + + if (stringset != ETH_SS_STATS) + return; + + /* Add main counters */ + for (i = 0; i < NUM_MAIN_STATS; i++) + strcpy(data + (index++) * ETH_GSTRING_LEN, main_strings[i]); + for (i = 0; i < NUM_PORT_STATS; i++) + strcpy(data + (index++) * ETH_GSTRING_LEN, + main_strings[i + NUM_MAIN_STATS]); + for (i = 0; i < priv->tx_ring_num; i++) { + sprintf(data + (index++) * ETH_GSTRING_LEN, + "tx%d_packets", i); + sprintf(data + (index++) * ETH_GSTRING_LEN, + "tx%d_bytes", i); + } + for (i = 0; i < priv->rx_ring_num; i++) { + sprintf(data + (index++) * ETH_GSTRING_LEN, + "rx%d_packets", i); + sprintf(data + (index++) * ETH_GSTRING_LEN, + "rx%d_bytes", i); + } + for (i = 0; i < NUM_PKT_STATS; i++) + strcpy(data + (index++) * ETH_GSTRING_LEN, + main_strings[i + NUM_MAIN_STATS + NUM_PORT_STATS]); +} + +static int mlx4_en_get_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + cmd->autoneg = AUTONEG_DISABLE; + cmd->supported = SUPPORTED_10000baseT_Full; + cmd->advertising = SUPPORTED_10000baseT_Full; + if (netif_carrier_ok(dev)) { + cmd->speed = SPEED_10000; + cmd->duplex = DUPLEX_FULL; + } else { + cmd->speed = -1; + cmd->duplex = -1; + } + return 0; +} + +static int mlx4_en_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) +{ + if ((cmd->autoneg == AUTONEG_ENABLE) || + (cmd->speed != SPEED_10000) || (cmd->duplex != DUPLEX_FULL)) + return -EINVAL; + + /* Nothing to change */ + return 0; +} + +static int mlx4_en_get_coalesce(struct net_device *dev, + struct ethtool_coalesce *coal) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + + coal->tx_coalesce_usecs = 0; + coal->tx_max_coalesced_frames = 0; + coal->rx_coalesce_usecs = priv->rx_usecs; + coal->rx_max_coalesced_frames = priv->rx_frames; + + coal->pkt_rate_low = priv->pkt_rate_low; + coal->rx_coalesce_usecs_low = priv->rx_usecs_low; + coal->pkt_rate_high = priv->pkt_rate_high; + coal->rx_coalesce_usecs_high = priv->rx_usecs_high; + coal->rate_sample_interval = priv->sample_interval; + coal->use_adaptive_rx_coalesce = priv->adaptive_rx_coal; + return 0; +} + +static int mlx4_en_set_coalesce(struct net_device *dev, + struct ethtool_coalesce *coal) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + int err, i; + + priv->rx_frames = (coal->rx_max_coalesced_frames == + MLX4_EN_AUTO_CONF) ? + MLX4_EN_RX_COAL_TARGET / + priv->dev->mtu + 1 : + coal->rx_max_coalesced_frames; + priv->rx_usecs = (coal->rx_coalesce_usecs == + MLX4_EN_AUTO_CONF) ? + MLX4_EN_RX_COAL_TIME : + coal->rx_coalesce_usecs; + + /* Set adaptive coalescing params */ + priv->pkt_rate_low = coal->pkt_rate_low; + priv->rx_usecs_low = coal->rx_coalesce_usecs_low; + priv->pkt_rate_high = coal->pkt_rate_high; + priv->rx_usecs_high = coal->rx_coalesce_usecs_high; + priv->sample_interval = coal->rate_sample_interval; + priv->adaptive_rx_coal = coal->use_adaptive_rx_coalesce; + priv->last_moder_time = MLX4_EN_AUTO_CONF; + if (priv->adaptive_rx_coal) + return 0; + + for (i = 0; i < priv->rx_ring_num; i++) { + priv->rx_cq[i].moder_cnt = priv->rx_frames; + priv->rx_cq[i].moder_time = priv->rx_usecs; + err = mlx4_en_set_cq_moder(priv, &priv->rx_cq[i]); + if (err) + return err; + } + return 0; +} + +static int mlx4_en_set_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *pause) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + int err; + + mdev->profile.tx_pause = pause->tx_pause != 0; + mdev->profile.rx_pause = pause->rx_pause != 0; + err = mlx4_SET_PORT_general(mdev->dev, priv->port, + priv->rx_skb_size + ETH_FCS_LEN, + mdev->profile.tx_pause, + mdev->profile.tx_ppp, + mdev->profile.rx_pause, + mdev->profile.rx_ppp); + if (err) + mlx4_err(mdev, "Failed setting pause params to\n"); + + return err; +} + +static void mlx4_en_get_pauseparam(struct net_device *dev, + struct ethtool_pauseparam *pause) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + + pause->tx_pause = mdev->profile.tx_pause; + pause->rx_pause = mdev->profile.rx_pause; +} + +static void mlx4_en_get_ringparam(struct net_device *dev, + struct ethtool_ringparam *param) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + + memset(param, 0, sizeof(*param)); + param->rx_max_pending = mdev->dev->caps.max_rq_sg; + param->tx_max_pending = mdev->dev->caps.max_sq_sg; + param->rx_pending = mdev->profile.prof[priv->port].rx_ring_size; + param->tx_pending = mdev->profile.prof[priv->port].tx_ring_size; +} + +const struct ethtool_ops mlx4_en_ethtool_ops = { + .get_drvinfo = mlx4_en_get_drvinfo, + .get_settings = mlx4_en_get_settings, + .set_settings = mlx4_en_set_settings, +#ifdef NETIF_F_TSO + .get_tso = mlx4_en_get_tso, + .set_tso = mlx4_en_set_tso, +#endif + .get_sg = ethtool_op_get_sg, + .set_sg = ethtool_op_set_sg, + .get_link = ethtool_op_get_link, + .get_rx_csum = mlx4_en_get_rx_csum, + .set_rx_csum = mlx4_en_set_rx_csum, + .get_tx_csum = ethtool_op_get_tx_csum, + .set_tx_csum = ethtool_op_set_tx_ipv6_csum, + .get_strings = mlx4_en_get_strings, + .get_sset_count = mlx4_en_get_sset_count, + .get_ethtool_stats = mlx4_en_get_ethtool_stats, + .get_wol = mlx4_en_get_wol, + .get_msglevel = mlx4_en_get_msglevel, + .set_msglevel = mlx4_en_set_msglevel, + .get_coalesce = mlx4_en_get_coalesce, + .set_coalesce = mlx4_en_set_coalesce, + .get_pauseparam = mlx4_en_get_pauseparam, + .set_pauseparam = mlx4_en_set_pauseparam, + .get_ringparam = mlx4_en_get_ringparam, + .get_flags = ethtool_op_get_flags, + .set_flags = ethtool_op_set_flags, +}; + + + + + diff --git a/drivers/net/mlx4/en_port.c b/drivers/net/mlx4/en_port.c new file mode 100644 index 000000000000..c5a4c0389752 --- /dev/null +++ b/drivers/net/mlx4/en_port.c @@ -0,0 +1,261 @@ +/* + * Copyright (c) 2007 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + + +#include <linux/if_vlan.h> + +#include <linux/mlx4/device.h> +#include <linux/mlx4/cmd.h> + +#include "en_port.h" +#include "mlx4_en.h" + + +int mlx4_SET_MCAST_FLTR(struct mlx4_dev *dev, u8 port, + u64 mac, u64 clear, u8 mode) +{ + return mlx4_cmd(dev, (mac | (clear << 63)), port, mode, + MLX4_CMD_SET_MCAST_FLTR, MLX4_CMD_TIME_CLASS_B); +} + +int mlx4_SET_VLAN_FLTR(struct mlx4_dev *dev, u8 port, struct vlan_group *grp) +{ + struct mlx4_cmd_mailbox *mailbox; + struct mlx4_set_vlan_fltr_mbox *filter; + int i; + int j; + int index = 0; + u32 entry; + int err = 0; + + mailbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(mailbox)) + return PTR_ERR(mailbox); + + filter = mailbox->buf; + if (grp) { + memset(filter, 0, sizeof *filter); + for (i = VLAN_FLTR_SIZE - 1; i >= 0; i--) { + entry = 0; + for (j = 0; j < 32; j++) + if (vlan_group_get_device(grp, index++)) + entry |= 1 << j; + filter->entry[i] = cpu_to_be32(entry); + } + } else { + /* When no vlans are configured we block all vlans */ + memset(filter, 0, sizeof(*filter)); + } + err = mlx4_cmd(dev, mailbox->dma, port, 0, MLX4_CMD_SET_VLAN_FLTR, + MLX4_CMD_TIME_CLASS_B); + mlx4_free_cmd_mailbox(dev, mailbox); + return err; +} + + +int mlx4_SET_PORT_general(struct mlx4_dev *dev, u8 port, int mtu, + u8 pptx, u8 pfctx, u8 pprx, u8 pfcrx) +{ + struct mlx4_cmd_mailbox *mailbox; + struct mlx4_set_port_general_context *context; + int err; + u32 in_mod; + + mailbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(mailbox)) + return PTR_ERR(mailbox); + context = mailbox->buf; + memset(context, 0, sizeof *context); + + context->flags = SET_PORT_GEN_ALL_VALID; + context->mtu = cpu_to_be16(mtu); + context->pptx = (pptx * (!pfctx)) << 7; + context->pfctx = pfctx; + context->pprx = (pprx * (!pfcrx)) << 7; + context->pfcrx = pfcrx; + + in_mod = MLX4_SET_PORT_GENERAL << 8 | port; + err = mlx4_cmd(dev, mailbox->dma, in_mod, 1, MLX4_CMD_SET_PORT, + MLX4_CMD_TIME_CLASS_B); + + mlx4_free_cmd_mailbox(dev, mailbox); + return err; +} + +int mlx4_SET_PORT_qpn_calc(struct mlx4_dev *dev, u8 port, u32 base_qpn, + u8 promisc) +{ + struct mlx4_cmd_mailbox *mailbox; + struct mlx4_set_port_rqp_calc_context *context; + int err; + u32 in_mod; + + mailbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(mailbox)) + return PTR_ERR(mailbox); + context = mailbox->buf; + memset(context, 0, sizeof *context); + + context->base_qpn = cpu_to_be32(base_qpn); + context->promisc = cpu_to_be32(promisc << SET_PORT_PROMISC_SHIFT | base_qpn); + context->mcast = cpu_to_be32(1 << SET_PORT_PROMISC_SHIFT | base_qpn); + context->intra_no_vlan = 0; + context->no_vlan = MLX4_NO_VLAN_IDX; + context->intra_vlan_miss = 0; + context->vlan_miss = MLX4_VLAN_MISS_IDX; + + in_mod = MLX4_SET_PORT_RQP_CALC << 8 | port; + err = mlx4_cmd(dev, mailbox->dma, in_mod, 1, MLX4_CMD_SET_PORT, + MLX4_CMD_TIME_CLASS_B); + + mlx4_free_cmd_mailbox(dev, mailbox); + return err; +} + + +int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) +{ + struct mlx4_en_stat_out_mbox *mlx4_en_stats; + struct mlx4_en_priv *priv = netdev_priv(mdev->pndev[port]); + struct net_device_stats *stats = &priv->stats; + struct mlx4_cmd_mailbox *mailbox; + u64 in_mod = reset << 8 | port; + int err; + + mailbox = mlx4_alloc_cmd_mailbox(mdev->dev); + if (IS_ERR(mailbox)) + return PTR_ERR(mailbox); + memset(mailbox->buf, 0, sizeof(*mlx4_en_stats)); + err = mlx4_cmd_box(mdev->dev, 0, mailbox->dma, in_mod, 0, + MLX4_CMD_DUMP_ETH_STATS, MLX4_CMD_TIME_CLASS_B); + if (err) + goto out; + + mlx4_en_stats = mailbox->buf; + + spin_lock_bh(&priv->stats_lock); + + stats->rx_packets = be32_to_cpu(mlx4_en_stats->RTOTFRMS) - + be32_to_cpu(mlx4_en_stats->RDROP); + stats->tx_packets = be64_to_cpu(mlx4_en_stats->TTOT_prio_0) + + be64_to_cpu(mlx4_en_stats->TTOT_prio_1) + + be64_to_cpu(mlx4_en_stats->TTOT_prio_2) + + be64_to_cpu(mlx4_en_stats->TTOT_prio_3) + + be64_to_cpu(mlx4_en_stats->TTOT_prio_4) + + be64_to_cpu(mlx4_en_stats->TTOT_prio_5) + + be64_to_cpu(mlx4_en_stats->TTOT_prio_6) + + be64_to_cpu(mlx4_en_stats->TTOT_prio_7) + + be64_to_cpu(mlx4_en_stats->TTOT_novlan) + + be64_to_cpu(mlx4_en_stats->TTOT_loopbk); + stats->rx_bytes = be64_to_cpu(mlx4_en_stats->ROCT_prio_0) + + be64_to_cpu(mlx4_en_stats->ROCT_prio_1) + + be64_to_cpu(mlx4_en_stats->ROCT_prio_2) + + be64_to_cpu(mlx4_en_stats->ROCT_prio_3) + + be64_to_cpu(mlx4_en_stats->ROCT_prio_4) + + be64_to_cpu(mlx4_en_stats->ROCT_prio_5) + + be64_to_cpu(mlx4_en_stats->ROCT_prio_6) + + be64_to_cpu(mlx4_en_stats->ROCT_prio_7) + + be64_to_cpu(mlx4_en_stats->ROCT_novlan); + + stats->tx_bytes = be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_0) + + be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_1) + + be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_2) + + be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_3) + + be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_4) + + be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_5) + + be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_6) + + be64_to_cpu(mlx4_en_stats->TTTLOCT_prio_7) + + be64_to_cpu(mlx4_en_stats->TTTLOCT_novlan) + + be64_to_cpu(mlx4_en_stats->TTTLOCT_loopbk); + + stats->rx_errors = be64_to_cpu(mlx4_en_stats->PCS) + + be32_to_cpu(mlx4_en_stats->RdropLength) + + be32_to_cpu(mlx4_en_stats->RJBBR) + + be32_to_cpu(mlx4_en_stats->RCRC) + + be32_to_cpu(mlx4_en_stats->RRUNT); + stats->tx_errors = be32_to_cpu(mlx4_en_stats->TDROP); + stats->multicast = be64_to_cpu(mlx4_en_stats->MCAST_prio_0) + + be64_to_cpu(mlx4_en_stats->MCAST_prio_1) + + be64_to_cpu(mlx4_en_stats->MCAST_prio_2) + + be64_to_cpu(mlx4_en_stats->MCAST_prio_3) + + be64_to_cpu(mlx4_en_stats->MCAST_prio_4) + + be64_to_cpu(mlx4_en_stats->MCAST_prio_5) + + be64_to_cpu(mlx4_en_stats->MCAST_prio_6) + + be64_to_cpu(mlx4_en_stats->MCAST_prio_7) + + be64_to_cpu(mlx4_en_stats->MCAST_novlan); + stats->collisions = 0; + stats->rx_length_errors = be32_to_cpu(mlx4_en_stats->RdropLength); + stats->rx_over_errors = be32_to_cpu(mlx4_en_stats->RdropOvflw); + stats->rx_crc_errors = be32_to_cpu(mlx4_en_stats->RCRC); + stats->rx_frame_errors = 0; + stats->rx_fifo_errors = be32_to_cpu(mlx4_en_stats->RdropOvflw); + stats->rx_missed_errors = be32_to_cpu(mlx4_en_stats->RdropOvflw); + stats->tx_aborted_errors = 0; + stats->tx_carrier_errors = 0; + stats->tx_fifo_errors = 0; + stats->tx_heartbeat_errors = 0; + stats->tx_window_errors = 0; + + priv->pkstats.broadcast = + be64_to_cpu(mlx4_en_stats->RBCAST_prio_0) + + be64_to_cpu(mlx4_en_stats->RBCAST_prio_1) + + be64_to_cpu(mlx4_en_stats->RBCAST_prio_2) + + be64_to_cpu(mlx4_en_stats->RBCAST_prio_3) + + be64_to_cpu(mlx4_en_stats->RBCAST_prio_4) + + be64_to_cpu(mlx4_en_stats->RBCAST_prio_5) + + be64_to_cpu(mlx4_en_stats->RBCAST_prio_6) + + be64_to_cpu(mlx4_en_stats->RBCAST_prio_7) + + be64_to_cpu(mlx4_en_stats->RBCAST_novlan); + priv->pkstats.rx_prio[0] = be64_to_cpu(mlx4_en_stats->RTOT_prio_0); + priv->pkstats.rx_prio[1] = be64_to_cpu(mlx4_en_stats->RTOT_prio_1); + priv->pkstats.rx_prio[2] = be64_to_cpu(mlx4_en_stats->RTOT_prio_2); + priv->pkstats.rx_prio[3] = be64_to_cpu(mlx4_en_stats->RTOT_prio_3); + priv->pkstats.rx_prio[4] = be64_to_cpu(mlx4_en_stats->RTOT_prio_4); + priv->pkstats.rx_prio[5] = be64_to_cpu(mlx4_en_stats->RTOT_prio_5); + priv->pkstats.rx_prio[6] = be64_to_cpu(mlx4_en_stats->RTOT_prio_6); + priv->pkstats.rx_prio[7] = be64_to_cpu(mlx4_en_stats->RTOT_prio_7); + priv->pkstats.tx_prio[0] = be64_to_cpu(mlx4_en_stats->TTOT_prio_0); + priv->pkstats.tx_prio[1] = be64_to_cpu(mlx4_en_stats->TTOT_prio_1); + priv->pkstats.tx_prio[2] = be64_to_cpu(mlx4_en_stats->TTOT_prio_2); + priv->pkstats.tx_prio[3] = be64_to_cpu(mlx4_en_stats->TTOT_prio_3); + priv->pkstats.tx_prio[4] = be64_to_cpu(mlx4_en_stats->TTOT_prio_4); + priv->pkstats.tx_prio[5] = be64_to_cpu(mlx4_en_stats->TTOT_prio_5); + priv->pkstats.tx_prio[6] = be64_to_cpu(mlx4_en_stats->TTOT_prio_6); + priv->pkstats.tx_prio[7] = be64_to_cpu(mlx4_en_stats->TTOT_prio_7); + spin_unlock_bh(&priv->stats_lock); + +out: + mlx4_free_cmd_mailbox(mdev->dev, mailbox); + return err; +} + diff --git a/drivers/net/mlx4/en_port.h b/drivers/net/mlx4/en_port.h new file mode 100644 index 000000000000..e6477f12beb5 --- /dev/null +++ b/drivers/net/mlx4/en_port.h @@ -0,0 +1,570 @@ +/* + * Copyright (c) 2007 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#ifndef _MLX4_EN_PORT_H_ +#define _MLX4_EN_PORT_H_ + + +#define SET_PORT_GEN_ALL_VALID 0x7 +#define SET_PORT_PROMISC_SHIFT 31 + +enum { + MLX4_CMD_SET_VLAN_FLTR = 0x47, + MLX4_CMD_SET_MCAST_FLTR = 0x48, + MLX4_CMD_DUMP_ETH_STATS = 0x49, +}; + +struct mlx4_set_port_general_context { + u8 reserved[3]; + u8 flags; + u16 reserved2; + __be16 mtu; + u8 pptx; + u8 pfctx; + u16 reserved3; + u8 pprx; + u8 pfcrx; + u16 reserved4; +}; + +struct mlx4_set_port_rqp_calc_context { + __be32 base_qpn; + __be32 flags; + u8 reserved[3]; + u8 mac_miss; + u8 intra_no_vlan; + u8 no_vlan; + u8 intra_vlan_miss; + u8 vlan_miss; + u8 reserved2[3]; + u8 no_vlan_prio; + __be32 promisc; + __be32 mcast; +}; + +#define VLAN_FLTR_SIZE 128 +struct mlx4_set_vlan_fltr_mbox { + __be32 entry[VLAN_FLTR_SIZE]; +}; + + +enum { + MLX4_MCAST_CONFIG = 0, + MLX4_MCAST_DISABLE = 1, + MLX4_MCAST_ENABLE = 2, +}; + + +struct mlx4_en_stat_out_mbox { + /* Received frames with a length of 64 octets */ + __be64 R64_prio_0; + __be64 R64_prio_1; + __be64 R64_prio_2; + __be64 R64_prio_3; + __be64 R64_prio_4; + __be64 R64_prio_5; + __be64 R64_prio_6; + __be64 R64_prio_7; + __be64 R64_novlan; + /* Received frames with a length of 127 octets */ + __be64 R127_prio_0; + __be64 R127_prio_1; + __be64 R127_prio_2; + __be64 R127_prio_3; + __be64 R127_prio_4; + __be64 R127_prio_5; + __be64 R127_prio_6; + __be64 R127_prio_7; + __be64 R127_novlan; + /* Received frames with a length of 255 octets */ + __be64 R255_prio_0; + __be64 R255_prio_1; + __be64 R255_prio_2; + __be64 R255_prio_3; + __be64 R255_prio_4; + __be64 R255_prio_5; + __be64 R255_prio_6; + __be64 R255_prio_7; + __be64 R255_novlan; + /* Received frames with a length of 511 octets */ + __be64 R511_prio_0; + __be64 R511_prio_1; + __be64 R511_prio_2; + __be64 R511_prio_3; + __be64 R511_prio_4; + __be64 R511_prio_5; + __be64 R511_prio_6; + __be64 R511_prio_7; + __be64 R511_novlan; + /* Received frames with a length of 1023 octets */ + __be64 R1023_prio_0; + __be64 R1023_prio_1; + __be64 R1023_prio_2; + __be64 R1023_prio_3; + __be64 R1023_prio_4; + __be64 R1023_prio_5; + __be64 R1023_prio_6; + __be64 R1023_prio_7; + __be64 R1023_novlan; + /* Received frames with a length of 1518 octets */ + __be64 R1518_prio_0; + __be64 R1518_prio_1; + __be64 R1518_prio_2; + __be64 R1518_prio_3; + __be64 R1518_prio_4; + __be64 R1518_prio_5; + __be64 R1518_prio_6; + __be64 R1518_prio_7; + __be64 R1518_novlan; + /* Received frames with a length of 1522 octets */ + __be64 R1522_prio_0; + __be64 R1522_prio_1; + __be64 R1522_prio_2; + __be64 R1522_prio_3; + __be64 R1522_prio_4; + __be64 R1522_prio_5; + __be64 R1522_prio_6; + __be64 R1522_prio_7; + __be64 R1522_novlan; + /* Received frames with a length of 1548 octets */ + __be64 R1548_prio_0; + __be64 R1548_prio_1; + __be64 R1548_prio_2; + __be64 R1548_prio_3; + __be64 R1548_prio_4; + __be64 R1548_prio_5; + __be64 R1548_prio_6; + __be64 R1548_prio_7; + __be64 R1548_novlan; + /* Received frames with a length of 1548 < octets < MTU */ + __be64 R2MTU_prio_0; + __be64 R2MTU_prio_1; + __be64 R2MTU_prio_2; + __be64 R2MTU_prio_3; + __be64 R2MTU_prio_4; + __be64 R2MTU_prio_5; + __be64 R2MTU_prio_6; + __be64 R2MTU_prio_7; + __be64 R2MTU_novlan; + /* Received frames with a length of MTU< octets and good CRC */ + __be64 RGIANT_prio_0; + __be64 RGIANT_prio_1; + __be64 RGIANT_prio_2; + __be64 RGIANT_prio_3; + __be64 RGIANT_prio_4; + __be64 RGIANT_prio_5; + __be64 RGIANT_prio_6; + __be64 RGIANT_prio_7; + __be64 RGIANT_novlan; + /* Received broadcast frames with good CRC */ + __be64 RBCAST_prio_0; + __be64 RBCAST_prio_1; + __be64 RBCAST_prio_2; + __be64 RBCAST_prio_3; + __be64 RBCAST_prio_4; + __be64 RBCAST_prio_5; + __be64 RBCAST_prio_6; + __be64 RBCAST_prio_7; + __be64 RBCAST_novlan; + /* Received multicast frames with good CRC */ + __be64 MCAST_prio_0; + __be64 MCAST_prio_1; + __be64 MCAST_prio_2; + __be64 MCAST_prio_3; + __be64 MCAST_prio_4; + __be64 MCAST_prio_5; + __be64 MCAST_prio_6; + __be64 MCAST_prio_7; + __be64 MCAST_novlan; + /* Received unicast not short or GIANT frames with good CRC */ + __be64 RTOTG_prio_0; + __be64 RTOTG_prio_1; + __be64 RTOTG_prio_2; + __be64 RTOTG_prio_3; + __be64 RTOTG_prio_4; + __be64 RTOTG_prio_5; + __be64 RTOTG_prio_6; + __be64 RTOTG_prio_7; + __be64 RTOTG_novlan; + + /* Count of total octets of received frames, includes framing characters */ + __be64 RTTLOCT_prio_0; + /* Count of total octets of received frames, not including framing + characters */ + __be64 RTTLOCT_NOFRM_prio_0; + /* Count of Total number of octets received + (only for frames without errors) */ + __be64 ROCT_prio_0; + + __be64 RTTLOCT_prio_1; + __be64 RTTLOCT_NOFRM_prio_1; + __be64 ROCT_prio_1; + + __be64 RTTLOCT_prio_2; + __be64 RTTLOCT_NOFRM_prio_2; + __be64 ROCT_prio_2; + + __be64 RTTLOCT_prio_3; + __be64 RTTLOCT_NOFRM_prio_3; + __be64 ROCT_prio_3; + + __be64 RTTLOCT_prio_4; + __be64 RTTLOCT_NOFRM_prio_4; + __be64 ROCT_prio_4; + + __be64 RTTLOCT_prio_5; + __be64 RTTLOCT_NOFRM_prio_5; + __be64 ROCT_prio_5; + + __be64 RTTLOCT_prio_6; + __be64 RTTLOCT_NOFRM_prio_6; + __be64 ROCT_prio_6; + + __be64 RTTLOCT_prio_7; + __be64 RTTLOCT_NOFRM_prio_7; + __be64 ROCT_prio_7; + + __be64 RTTLOCT_novlan; + __be64 RTTLOCT_NOFRM_novlan; + __be64 ROCT_novlan; + + /* Count of Total received frames including bad frames */ + __be64 RTOT_prio_0; + /* Count of Total number of received frames with 802.1Q encapsulation */ + __be64 R1Q_prio_0; + __be64 reserved1; + + __be64 RTOT_prio_1; + __be64 R1Q_prio_1; + __be64 reserved2; + + __be64 RTOT_prio_2; + __be64 R1Q_prio_2; + __be64 reserved3; + + __be64 RTOT_prio_3; + __be64 R1Q_prio_3; + __be64 reserved4; + + __be64 RTOT_prio_4; + __be64 R1Q_prio_4; + __be64 reserved5; + + __be64 RTOT_prio_5; + __be64 R1Q_prio_5; + __be64 reserved6; + + __be64 RTOT_prio_6; + __be64 R1Q_prio_6; + __be64 reserved7; + + __be64 RTOT_prio_7; + __be64 R1Q_prio_7; + __be64 reserved8; + + __be64 RTOT_novlan; + __be64 R1Q_novlan; + __be64 reserved9; + + /* Total number of Successfully Received Control Frames */ + __be64 RCNTL; + __be64 reserved10; + __be64 reserved11; + __be64 reserved12; + /* Count of received frames with a length/type field value between 46 + (42 for VLANtagged frames) and 1500 (also 1500 for VLAN-tagged frames), + inclusive */ + __be64 RInRangeLengthErr; + /* Count of received frames with length/type field between 1501 and 1535 + decimal, inclusive */ + __be64 ROutRangeLengthErr; + /* Count of received frames that are longer than max allowed size for + 802.3 frames (1518/1522) */ + __be64 RFrmTooLong; + /* Count frames received with PCS error */ + __be64 PCS; + + /* Transmit frames with a length of 64 octets */ + __be64 T64_prio_0; + __be64 T64_prio_1; + __be64 T64_prio_2; + __be64 T64_prio_3; + __be64 T64_prio_4; + __be64 T64_prio_5; + __be64 T64_prio_6; + __be64 T64_prio_7; + __be64 T64_novlan; + __be64 T64_loopbk; + /* Transmit frames with a length of 65 to 127 octets. */ + __be64 T127_prio_0; + __be64 T127_prio_1; + __be64 T127_prio_2; + __be64 T127_prio_3; + __be64 T127_prio_4; + __be64 T127_prio_5; + __be64 T127_prio_6; + __be64 T127_prio_7; + __be64 T127_novlan; + __be64 T127_loopbk; + /* Transmit frames with a length of 128 to 255 octets */ + __be64 T255_prio_0; + __be64 T255_prio_1; + __be64 T255_prio_2; + __be64 T255_prio_3; + __be64 T255_prio_4; + __be64 T255_prio_5; + __be64 T255_prio_6; + __be64 T255_prio_7; + __be64 T255_novlan; + __be64 T255_loopbk; + /* Transmit frames with a length of 256 to 511 octets */ + __be64 T511_prio_0; + __be64 T511_prio_1; + __be64 T511_prio_2; + __be64 T511_prio_3; + __be64 T511_prio_4; + __be64 T511_prio_5; + __be64 T511_prio_6; + __be64 T511_prio_7; + __be64 T511_novlan; + __be64 T511_loopbk; + /* Transmit frames with a length of 512 to 1023 octets */ + __be64 T1023_prio_0; + __be64 T1023_prio_1; + __be64 T1023_prio_2; + __be64 T1023_prio_3; + __be64 T1023_prio_4; + __be64 T1023_prio_5; + __be64 T1023_prio_6; + __be64 T1023_prio_7; + __be64 T1023_novlan; + __be64 T1023_loopbk; + /* Transmit frames with a length of 1024 to 1518 octets */ + __be64 T1518_prio_0; + __be64 T1518_prio_1; + __be64 T1518_prio_2; + __be64 T1518_prio_3; + __be64 T1518_prio_4; + __be64 T1518_prio_5; + __be64 T1518_prio_6; + __be64 T1518_prio_7; + __be64 T1518_novlan; + __be64 T1518_loopbk; + /* Counts transmit frames with a length of 1519 to 1522 bytes */ + __be64 T1522_prio_0; + __be64 T1522_prio_1; + __be64 T1522_prio_2; + __be64 T1522_prio_3; + __be64 T1522_prio_4; + __be64 T1522_prio_5; + __be64 T1522_prio_6; + __be64 T1522_prio_7; + __be64 T1522_novlan; + __be64 T1522_loopbk; + /* Transmit frames with a length of 1523 to 1548 octets */ + __be64 T1548_prio_0; + __be64 T1548_prio_1; + __be64 T1548_prio_2; + __be64 T1548_prio_3; + __be64 T1548_prio_4; + __be64 T1548_prio_5; + __be64 T1548_prio_6; + __be64 T1548_prio_7; + __be64 T1548_novlan; + __be64 T1548_loopbk; + /* Counts transmit frames with a length of 1549 to MTU bytes */ + __be64 T2MTU_prio_0; + __be64 T2MTU_prio_1; + __be64 T2MTU_prio_2; + __be64 T2MTU_prio_3; + __be64 T2MTU_prio_4; + __be64 T2MTU_prio_5; + __be64 T2MTU_prio_6; + __be64 T2MTU_prio_7; + __be64 T2MTU_novlan; + __be64 T2MTU_loopbk; + /* Transmit frames with a length greater than MTU octets and a good CRC. */ + __be64 TGIANT_prio_0; + __be64 TGIANT_prio_1; + __be64 TGIANT_prio_2; + __be64 TGIANT_prio_3; + __be64 TGIANT_prio_4; + __be64 TGIANT_prio_5; + __be64 TGIANT_prio_6; + __be64 TGIANT_prio_7; + __be64 TGIANT_novlan; + __be64 TGIANT_loopbk; + /* Transmit broadcast frames with a good CRC */ + __be64 TBCAST_prio_0; + __be64 TBCAST_prio_1; + __be64 TBCAST_prio_2; + __be64 TBCAST_prio_3; + __be64 TBCAST_prio_4; + __be64 TBCAST_prio_5; + __be64 TBCAST_prio_6; + __be64 TBCAST_prio_7; + __be64 TBCAST_novlan; + __be64 TBCAST_loopbk; + /* Transmit multicast frames with a good CRC */ + __be64 TMCAST_prio_0; + __be64 TMCAST_prio_1; + __be64 TMCAST_prio_2; + __be64 TMCAST_prio_3; + __be64 TMCAST_prio_4; + __be64 TMCAST_prio_5; + __be64 TMCAST_prio_6; + __be64 TMCAST_prio_7; + __be64 TMCAST_novlan; + __be64 TMCAST_loopbk; + /* Transmit good frames that are neither broadcast nor multicast */ + __be64 TTOTG_prio_0; + __be64 TTOTG_prio_1; + __be64 TTOTG_prio_2; + __be64 TTOTG_prio_3; + __be64 TTOTG_prio_4; + __be64 TTOTG_prio_5; + __be64 TTOTG_prio_6; + __be64 TTOTG_prio_7; + __be64 TTOTG_novlan; + __be64 TTOTG_loopbk; + + /* total octets of transmitted frames, including framing characters */ + __be64 TTTLOCT_prio_0; + /* total octets of transmitted frames, not including framing characters */ + __be64 TTTLOCT_NOFRM_prio_0; + /* ifOutOctets */ + __be64 TOCT_prio_0; + + __be64 TTTLOCT_prio_1; + __be64 TTTLOCT_NOFRM_prio_1; + __be64 TOCT_prio_1; + + __be64 TTTLOCT_prio_2; + __be64 TTTLOCT_NOFRM_prio_2; + __be64 TOCT_prio_2; + + __be64 TTTLOCT_prio_3; + __be64 TTTLOCT_NOFRM_prio_3; + __be64 TOCT_prio_3; + + __be64 TTTLOCT_prio_4; + __be64 TTTLOCT_NOFRM_prio_4; + __be64 TOCT_prio_4; + + __be64 TTTLOCT_prio_5; + __be64 TTTLOCT_NOFRM_prio_5; + __be64 TOCT_prio_5; + + __be64 TTTLOCT_prio_6; + __be64 TTTLOCT_NOFRM_prio_6; + __be64 TOCT_prio_6; + + __be64 TTTLOCT_prio_7; + __be64 TTTLOCT_NOFRM_prio_7; + __be64 TOCT_prio_7; + + __be64 TTTLOCT_novlan; + __be64 TTTLOCT_NOFRM_novlan; + __be64 TOCT_novlan; + + __be64 TTTLOCT_loopbk; + __be64 TTTLOCT_NOFRM_loopbk; + __be64 TOCT_loopbk; + + /* Total frames transmitted with a good CRC that are not aborted */ + __be64 TTOT_prio_0; + /* Total number of frames transmitted with 802.1Q encapsulation */ + __be64 T1Q_prio_0; + __be64 reserved13; + + __be64 TTOT_prio_1; + __be64 T1Q_prio_1; + __be64 reserved14; + + __be64 TTOT_prio_2; + __be64 T1Q_prio_2; + __be64 reserved15; + + __be64 TTOT_prio_3; + __be64 T1Q_prio_3; + __be64 reserved16; + + __be64 TTOT_prio_4; + __be64 T1Q_prio_4; + __be64 reserved17; + + __be64 TTOT_prio_5; + __be64 T1Q_prio_5; + __be64 reserved18; + + __be64 TTOT_prio_6; + __be64 T1Q_prio_6; + __be64 reserved19; + + __be64 TTOT_prio_7; + __be64 T1Q_prio_7; + __be64 reserved20; + + __be64 TTOT_novlan; + __be64 T1Q_novlan; + __be64 reserved21; + + __be64 TTOT_loopbk; + __be64 T1Q_loopbk; + __be64 reserved22; + + /* Received frames with a length greater than MTU octets and a bad CRC */ + __be32 RJBBR; + /* Received frames with a bad CRC that are not runts, jabbers, + or alignment errors */ + __be32 RCRC; + /* Received frames with SFD with a length of less than 64 octets and a + bad CRC */ + __be32 RRUNT; + /* Received frames with a length less than 64 octets and a good CRC */ + __be32 RSHORT; + /* Total Number of Received Packets Dropped */ + __be32 RDROP; + /* Drop due to overflow */ + __be32 RdropOvflw; + /* Drop due to overflow */ + __be32 RdropLength; + /* Total of good frames. Does not include frames received with + frame-too-long, FCS, or length errors */ + __be32 RTOTFRMS; + /* Total dropped Xmited packets */ + __be32 TDROP; +}; + + +#endif diff --git a/drivers/net/mlx4/en_resources.c b/drivers/net/mlx4/en_resources.c new file mode 100644 index 000000000000..a0545209e507 --- /dev/null +++ b/drivers/net/mlx4/en_resources.c @@ -0,0 +1,96 @@ +/* + * Copyright (c) 2007 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#include <linux/vmalloc.h> +#include <linux/mlx4/qp.h> + +#include "mlx4_en.h" + +void mlx4_en_fill_qp_context(struct mlx4_en_priv *priv, int size, int stride, + int is_tx, int rss, int qpn, int cqn, int srqn, + struct mlx4_qp_context *context) +{ + struct mlx4_en_dev *mdev = priv->mdev; + + memset(context, 0, sizeof *context); + context->flags = cpu_to_be32(7 << 16 | rss << 13); + context->pd = cpu_to_be32(mdev->priv_pdn); + context->mtu_msgmax = 0xff; + context->rq_size_stride = 0; + if (is_tx) + context->sq_size_stride = ilog2(size) << 3 | (ilog2(stride) - 4); + else + context->sq_size_stride = 1; + context->usr_page = cpu_to_be32(mdev->priv_uar.index); + context->local_qpn = cpu_to_be32(qpn); + context->pri_path.ackto = 1 & 0x07; + context->pri_path.sched_queue = 0x83 | (priv->port - 1) << 6; + context->pri_path.counter_index = 0xff; + context->cqn_send = cpu_to_be32(cqn); + context->cqn_recv = cpu_to_be32(cqn); + context->db_rec_addr = cpu_to_be64(priv->res.db.dma << 2); + if (!rss) + context->srqn = cpu_to_be32(MLX4_EN_USE_SRQ | srqn); +} + + +int mlx4_en_map_buffer(struct mlx4_buf *buf) +{ + struct page **pages; + int i; + + if (BITS_PER_LONG == 64 || buf->nbufs == 1) + return 0; + + pages = kmalloc(sizeof *pages * buf->nbufs, GFP_KERNEL); + if (!pages) + return -ENOMEM; + + for (i = 0; i < buf->nbufs; ++i) + pages[i] = virt_to_page(buf->page_list[i].buf); + + buf->direct.buf = vmap(pages, buf->nbufs, VM_MAP, PAGE_KERNEL); + kfree(pages); + if (!buf->direct.buf) + return -ENOMEM; + + return 0; +} + +void mlx4_en_unmap_buffer(struct mlx4_buf *buf) +{ + if (BITS_PER_LONG == 64 || buf->nbufs == 1) + return; + + vunmap(buf->direct.buf); +} diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c new file mode 100644 index 000000000000..6232227f56c3 --- /dev/null +++ b/drivers/net/mlx4/en_rx.c @@ -0,0 +1,1080 @@ +/* + * Copyright (c) 2007 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#include <linux/mlx4/cq.h> +#include <linux/mlx4/qp.h> +#include <linux/skbuff.h> +#include <linux/if_ether.h> +#include <linux/if_vlan.h> +#include <linux/vmalloc.h> + +#include "mlx4_en.h" + +static void *get_wqe(struct mlx4_en_rx_ring *ring, int n) +{ + int offset = n << ring->srq.wqe_shift; + return ring->buf + offset; +} + +static void mlx4_en_srq_event(struct mlx4_srq *srq, enum mlx4_event type) +{ + return; +} + +static int mlx4_en_get_frag_header(struct skb_frag_struct *frags, void **mac_hdr, + void **ip_hdr, void **tcpudp_hdr, + u64 *hdr_flags, void *priv) +{ + *mac_hdr = page_address(frags->page) + frags->page_offset; + *ip_hdr = *mac_hdr + ETH_HLEN; + *tcpudp_hdr = (struct tcphdr *)(*ip_hdr + sizeof(struct iphdr)); + *hdr_flags = LRO_IPV4 | LRO_TCP; + + return 0; +} + +static int mlx4_en_alloc_frag(struct mlx4_en_priv *priv, + struct mlx4_en_rx_desc *rx_desc, + struct skb_frag_struct *skb_frags, + struct mlx4_en_rx_alloc *ring_alloc, + int i) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_frag_info *frag_info = &priv->frag_info[i]; + struct mlx4_en_rx_alloc *page_alloc = &ring_alloc[i]; + struct page *page; + dma_addr_t dma; + + if (page_alloc->offset == frag_info->last_offset) { + /* Allocate new page */ + page = alloc_pages(GFP_ATOMIC | __GFP_COMP, MLX4_EN_ALLOC_ORDER); + if (!page) + return -ENOMEM; + + skb_frags[i].page = page_alloc->page; + skb_frags[i].page_offset = page_alloc->offset; + page_alloc->page = page; + page_alloc->offset = frag_info->frag_align; + } else { + page = page_alloc->page; + get_page(page); + + skb_frags[i].page = page; + skb_frags[i].page_offset = page_alloc->offset; + page_alloc->offset += frag_info->frag_stride; + } + dma = pci_map_single(mdev->pdev, page_address(skb_frags[i].page) + + skb_frags[i].page_offset, frag_info->frag_size, + PCI_DMA_FROMDEVICE); + rx_desc->data[i].addr = cpu_to_be64(dma); + return 0; +} + +static int mlx4_en_init_allocator(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring) +{ + struct mlx4_en_rx_alloc *page_alloc; + int i; + + for (i = 0; i < priv->num_frags; i++) { + page_alloc = &ring->page_alloc[i]; + page_alloc->page = alloc_pages(GFP_ATOMIC | __GFP_COMP, + MLX4_EN_ALLOC_ORDER); + if (!page_alloc->page) + goto out; + + page_alloc->offset = priv->frag_info[i].frag_align; + mlx4_dbg(DRV, priv, "Initialized allocator:%d with page:%p\n", + i, page_alloc->page); + } + return 0; + +out: + while (i--) { + page_alloc = &ring->page_alloc[i]; + put_page(page_alloc->page); + page_alloc->page = NULL; + } + return -ENOMEM; +} + +static void mlx4_en_destroy_allocator(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring) +{ + struct mlx4_en_rx_alloc *page_alloc; + int i; + + for (i = 0; i < priv->num_frags; i++) { + page_alloc = &ring->page_alloc[i]; + mlx4_dbg(DRV, priv, "Freeing allocator:%d count:%d\n", + i, page_count(page_alloc->page)); + + put_page(page_alloc->page); + page_alloc->page = NULL; + } +} + + +static void mlx4_en_init_rx_desc(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring, int index) +{ + struct mlx4_en_rx_desc *rx_desc = ring->buf + ring->stride * index; + struct skb_frag_struct *skb_frags = ring->rx_info + + (index << priv->log_rx_info); + int possible_frags; + int i; + + /* Pre-link descriptor */ + rx_desc->next.next_wqe_index = cpu_to_be16((index + 1) & ring->size_mask); + + /* Set size and memtype fields */ + for (i = 0; i < priv->num_frags; i++) { + skb_frags[i].size = priv->frag_info[i].frag_size; + rx_desc->data[i].byte_count = + cpu_to_be32(priv->frag_info[i].frag_size); + rx_desc->data[i].lkey = cpu_to_be32(priv->mdev->mr.key); + } + + /* If the number of used fragments does not fill up the ring stride, + * remaining (unused) fragments must be padded with null address/size + * and a special memory key */ + possible_frags = (ring->stride - sizeof(struct mlx4_en_rx_desc)) / DS_SIZE; + for (i = priv->num_frags; i < possible_frags; i++) { + rx_desc->data[i].byte_count = 0; + rx_desc->data[i].lkey = cpu_to_be32(MLX4_EN_MEMTYPE_PAD); + rx_desc->data[i].addr = 0; + } +} + + +static int mlx4_en_prepare_rx_desc(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring, int index) +{ + struct mlx4_en_rx_desc *rx_desc = ring->buf + (index * ring->stride); + struct skb_frag_struct *skb_frags = ring->rx_info + + (index << priv->log_rx_info); + int i; + + for (i = 0; i < priv->num_frags; i++) + if (mlx4_en_alloc_frag(priv, rx_desc, skb_frags, ring->page_alloc, i)) + goto err; + + return 0; + +err: + while (i--) + put_page(skb_frags[i].page); + return -ENOMEM; +} + +static inline void mlx4_en_update_rx_prod_db(struct mlx4_en_rx_ring *ring) +{ + *ring->wqres.db.db = cpu_to_be32(ring->prod & 0xffff); +} + +static int mlx4_en_fill_rx_buffers(struct mlx4_en_priv *priv) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_rx_ring *ring; + int ring_ind; + int buf_ind; + + for (buf_ind = 0; buf_ind < priv->prof->rx_ring_size; buf_ind++) { + for (ring_ind = 0; ring_ind < priv->rx_ring_num; ring_ind++) { + ring = &priv->rx_ring[ring_ind]; + + if (mlx4_en_prepare_rx_desc(priv, ring, + ring->actual_size)) { + if (ring->actual_size < MLX4_EN_MIN_RX_SIZE) { + mlx4_err(mdev, "Failed to allocate " + "enough rx buffers\n"); + return -ENOMEM; + } else { + if (netif_msg_rx_err(priv)) + mlx4_warn(mdev, + "Only %d buffers allocated\n", + ring->actual_size); + goto out; + } + } + ring->actual_size++; + ring->prod++; + } + } +out: + return 0; +} + +static int mlx4_en_fill_rx_buf(struct net_device *dev, + struct mlx4_en_rx_ring *ring) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + int num = 0; + int err; + + while ((u32) (ring->prod - ring->cons) < ring->actual_size) { + err = mlx4_en_prepare_rx_desc(priv, ring, ring->prod & + ring->size_mask); + if (err) { + if (netif_msg_rx_err(priv)) + mlx4_warn(priv->mdev, + "Failed preparing rx descriptor\n"); + priv->port_stats.rx_alloc_failed++; + break; + } + ++num; + ++ring->prod; + } + if ((u32) (ring->prod - ring->cons) == ring->size) + ring->full = 1; + + return num; +} + +static void mlx4_en_free_rx_buf(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct skb_frag_struct *skb_frags; + struct mlx4_en_rx_desc *rx_desc; + dma_addr_t dma; + int index; + int nr; + + mlx4_dbg(DRV, priv, "Freeing Rx buf - cons:%d prod:%d\n", + ring->cons, ring->prod); + + /* Unmap and free Rx buffers */ + BUG_ON((u32) (ring->prod - ring->cons) > ring->size); + while (ring->cons != ring->prod) { + index = ring->cons & ring->size_mask; + rx_desc = ring->buf + (index << ring->log_stride); + skb_frags = ring->rx_info + (index << priv->log_rx_info); + mlx4_dbg(DRV, priv, "Processing descriptor:%d\n", index); + + for (nr = 0; nr < priv->num_frags; nr++) { + mlx4_dbg(DRV, priv, "Freeing fragment:%d\n", nr); + dma = be64_to_cpu(rx_desc->data[nr].addr); + + mlx4_dbg(DRV, priv, "Unmaping buffer at dma:0x%llx\n", (u64) dma); + pci_unmap_single(mdev->pdev, dma, skb_frags[nr].size, + PCI_DMA_FROMDEVICE); + put_page(skb_frags[nr].page); + } + ++ring->cons; + } +} + + +void mlx4_en_rx_refill(struct work_struct *work) +{ + struct delayed_work *delay = container_of(work, struct delayed_work, work); + struct mlx4_en_priv *priv = container_of(delay, struct mlx4_en_priv, + refill_task); + struct mlx4_en_dev *mdev = priv->mdev; + struct net_device *dev = priv->dev; + struct mlx4_en_rx_ring *ring; + int need_refill = 0; + int i; + + mutex_lock(&mdev->state_lock); + if (!mdev->device_up || !priv->port_up) + goto out; + + /* We only get here if there are no receive buffers, so we can't race + * with Rx interrupts while filling buffers */ + for (i = 0; i < priv->rx_ring_num; i++) { + ring = &priv->rx_ring[i]; + if (ring->need_refill) { + if (mlx4_en_fill_rx_buf(dev, ring)) { + ring->need_refill = 0; + mlx4_en_update_rx_prod_db(ring); + } else + need_refill = 1; + } + } + if (need_refill) + queue_delayed_work(mdev->workqueue, &priv->refill_task, HZ); + +out: + mutex_unlock(&mdev->state_lock); +} + + +int mlx4_en_create_rx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring, u32 size, u16 stride) +{ + struct mlx4_en_dev *mdev = priv->mdev; + int err; + int tmp; + + /* Sanity check SRQ size before proceeding */ + if (size >= mdev->dev->caps.max_srq_wqes) + return -EINVAL; + + ring->prod = 0; + ring->cons = 0; + ring->size = size; + ring->size_mask = size - 1; + ring->stride = stride; + ring->log_stride = ffs(ring->stride) - 1; + ring->buf_size = ring->size * ring->stride; + + tmp = size * roundup_pow_of_two(MLX4_EN_MAX_RX_FRAGS * + sizeof(struct skb_frag_struct)); + ring->rx_info = vmalloc(tmp); + if (!ring->rx_info) { + mlx4_err(mdev, "Failed allocating rx_info ring\n"); + return -ENOMEM; + } + mlx4_dbg(DRV, priv, "Allocated rx_info ring at addr:%p size:%d\n", + ring->rx_info, tmp); + + err = mlx4_alloc_hwq_res(mdev->dev, &ring->wqres, + ring->buf_size, 2 * PAGE_SIZE); + if (err) + goto err_ring; + + err = mlx4_en_map_buffer(&ring->wqres.buf); + if (err) { + mlx4_err(mdev, "Failed to map RX buffer\n"); + goto err_hwq; + } + ring->buf = ring->wqres.buf.direct.buf; + + /* Configure lro mngr */ + memset(&ring->lro, 0, sizeof(struct net_lro_mgr)); + ring->lro.dev = priv->dev; + ring->lro.features = LRO_F_NAPI; + ring->lro.frag_align_pad = NET_IP_ALIGN; + ring->lro.ip_summed = CHECKSUM_UNNECESSARY; + ring->lro.ip_summed_aggr = CHECKSUM_UNNECESSARY; + ring->lro.max_desc = mdev->profile.num_lro; + ring->lro.max_aggr = MAX_SKB_FRAGS; + ring->lro.lro_arr = kzalloc(mdev->profile.num_lro * + sizeof(struct net_lro_desc), + GFP_KERNEL); + if (!ring->lro.lro_arr) { + mlx4_err(mdev, "Failed to allocate lro array\n"); + goto err_map; + } + ring->lro.get_frag_header = mlx4_en_get_frag_header; + + return 0; + +err_map: + mlx4_en_unmap_buffer(&ring->wqres.buf); +err_hwq: + mlx4_free_hwq_res(mdev->dev, &ring->wqres, ring->buf_size); +err_ring: + vfree(ring->rx_info); + ring->rx_info = NULL; + return err; +} + +int mlx4_en_activate_rx_rings(struct mlx4_en_priv *priv) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_wqe_srq_next_seg *next; + struct mlx4_en_rx_ring *ring; + int i; + int ring_ind; + int err; + int stride = roundup_pow_of_two(sizeof(struct mlx4_en_rx_desc) + + DS_SIZE * priv->num_frags); + int max_gs = (stride - sizeof(struct mlx4_wqe_srq_next_seg)) / DS_SIZE; + + for (ring_ind = 0; ring_ind < priv->rx_ring_num; ring_ind++) { + ring = &priv->rx_ring[ring_ind]; + + ring->prod = 0; + ring->cons = 0; + ring->actual_size = 0; + ring->cqn = priv->rx_cq[ring_ind].mcq.cqn; + + ring->stride = stride; + ring->log_stride = ffs(ring->stride) - 1; + ring->buf_size = ring->size * ring->stride; + + memset(ring->buf, 0, ring->buf_size); + mlx4_en_update_rx_prod_db(ring); + + /* Initailize all descriptors */ + for (i = 0; i < ring->size; i++) + mlx4_en_init_rx_desc(priv, ring, i); + + /* Initialize page allocators */ + err = mlx4_en_init_allocator(priv, ring); + if (err) { + mlx4_err(mdev, "Failed initializing ring allocator\n"); + goto err_allocator; + } + + /* Fill Rx buffers */ + ring->full = 0; + } + if (mlx4_en_fill_rx_buffers(priv)) + goto err_buffers; + + for (ring_ind = 0; ring_ind < priv->rx_ring_num; ring_ind++) { + ring = &priv->rx_ring[ring_ind]; + + mlx4_en_update_rx_prod_db(ring); + + /* Configure SRQ representing the ring */ + ring->srq.max = ring->size; + ring->srq.max_gs = max_gs; + ring->srq.wqe_shift = ilog2(ring->stride); + + for (i = 0; i < ring->srq.max; ++i) { + next = get_wqe(ring, i); + next->next_wqe_index = + cpu_to_be16((i + 1) & (ring->srq.max - 1)); + } + + err = mlx4_srq_alloc(mdev->dev, mdev->priv_pdn, &ring->wqres.mtt, + ring->wqres.db.dma, &ring->srq); + if (err){ + mlx4_err(mdev, "Failed to allocate srq\n"); + goto err_srq; + } + ring->srq.event = mlx4_en_srq_event; + } + + return 0; + +err_srq: + while (ring_ind >= 0) { + ring = &priv->rx_ring[ring_ind]; + mlx4_srq_free(mdev->dev, &ring->srq); + ring_ind--; + } + +err_buffers: + for (ring_ind = 0; ring_ind < priv->rx_ring_num; ring_ind++) + mlx4_en_free_rx_buf(priv, &priv->rx_ring[ring_ind]); + + ring_ind = priv->rx_ring_num - 1; +err_allocator: + while (ring_ind >= 0) { + mlx4_en_destroy_allocator(priv, &priv->rx_ring[ring_ind]); + ring_ind--; + } + return err; +} + +void mlx4_en_destroy_rx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring) +{ + struct mlx4_en_dev *mdev = priv->mdev; + + kfree(ring->lro.lro_arr); + mlx4_en_unmap_buffer(&ring->wqres.buf); + mlx4_free_hwq_res(mdev->dev, &ring->wqres, ring->buf_size); + vfree(ring->rx_info); + ring->rx_info = NULL; +} + +void mlx4_en_deactivate_rx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring) +{ + struct mlx4_en_dev *mdev = priv->mdev; + + mlx4_srq_free(mdev->dev, &ring->srq); + mlx4_en_free_rx_buf(priv, ring); + mlx4_en_destroy_allocator(priv, ring); +} + + +/* Unmap a completed descriptor and free unused pages */ +static int mlx4_en_complete_rx_desc(struct mlx4_en_priv *priv, + struct mlx4_en_rx_desc *rx_desc, + struct skb_frag_struct *skb_frags, + struct skb_frag_struct *skb_frags_rx, + struct mlx4_en_rx_alloc *page_alloc, + int length) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_frag_info *frag_info; + int nr; + dma_addr_t dma; + + /* Collect used fragments while replacing them in the HW descirptors */ + for (nr = 0; nr < priv->num_frags; nr++) { + frag_info = &priv->frag_info[nr]; + if (length <= frag_info->frag_prefix_size) + break; + + /* Save page reference in skb */ + skb_frags_rx[nr].page = skb_frags[nr].page; + skb_frags_rx[nr].size = skb_frags[nr].size; + skb_frags_rx[nr].page_offset = skb_frags[nr].page_offset; + dma = be64_to_cpu(rx_desc->data[nr].addr); + + /* Allocate a replacement page */ + if (mlx4_en_alloc_frag(priv, rx_desc, skb_frags, page_alloc, nr)) + goto fail; + + /* Unmap buffer */ + pci_unmap_single(mdev->pdev, dma, skb_frags[nr].size, + PCI_DMA_FROMDEVICE); + } + /* Adjust size of last fragment to match actual length */ + skb_frags_rx[nr - 1].size = length - + priv->frag_info[nr - 1].frag_prefix_size; + return nr; + +fail: + /* Drop all accumulated fragments (which have already been replaced in + * the descriptor) of this packet; remaining fragments are reused... */ + while (nr > 0) { + nr--; + put_page(skb_frags_rx[nr].page); + } + return 0; +} + + +static struct sk_buff *mlx4_en_rx_skb(struct mlx4_en_priv *priv, + struct mlx4_en_rx_desc *rx_desc, + struct skb_frag_struct *skb_frags, + struct mlx4_en_rx_alloc *page_alloc, + unsigned int length) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct sk_buff *skb; + void *va; + int used_frags; + dma_addr_t dma; + + skb = dev_alloc_skb(SMALL_PACKET_SIZE + NET_IP_ALIGN); + if (!skb) { + mlx4_dbg(RX_ERR, priv, "Failed allocating skb\n"); + return NULL; + } + skb->dev = priv->dev; + skb_reserve(skb, NET_IP_ALIGN); + skb->len = length; + skb->truesize = length + sizeof(struct sk_buff); + + /* Get pointer to first fragment so we could copy the headers into the + * (linear part of the) skb */ + va = page_address(skb_frags[0].page) + skb_frags[0].page_offset; + + if (length <= SMALL_PACKET_SIZE) { + /* We are copying all relevant data to the skb - temporarily + * synch buffers for the copy */ + dma = be64_to_cpu(rx_desc->data[0].addr); + dma_sync_single_range_for_cpu(&mdev->pdev->dev, dma, 0, + length, DMA_FROM_DEVICE); + skb_copy_to_linear_data(skb, va, length); + dma_sync_single_range_for_device(&mdev->pdev->dev, dma, 0, + length, DMA_FROM_DEVICE); + skb->tail += length; + } else { + + /* Move relevant fragments to skb */ + used_frags = mlx4_en_complete_rx_desc(priv, rx_desc, skb_frags, + skb_shinfo(skb)->frags, + page_alloc, length); + skb_shinfo(skb)->nr_frags = used_frags; + + /* Copy headers into the skb linear buffer */ + memcpy(skb->data, va, HEADER_COPY_SIZE); + skb->tail += HEADER_COPY_SIZE; + + /* Skip headers in first fragment */ + skb_shinfo(skb)->frags[0].page_offset += HEADER_COPY_SIZE; + + /* Adjust size of first fragment */ + skb_shinfo(skb)->frags[0].size -= HEADER_COPY_SIZE; + skb->data_len = length - HEADER_COPY_SIZE; + } + return skb; +} + +static void mlx4_en_copy_desc(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring, + int from, int to, int num) +{ + struct skb_frag_struct *skb_frags_from; + struct skb_frag_struct *skb_frags_to; + struct mlx4_en_rx_desc *rx_desc_from; + struct mlx4_en_rx_desc *rx_desc_to; + int from_index, to_index; + int nr, i; + + for (i = 0; i < num; i++) { + from_index = (from + i) & ring->size_mask; + to_index = (to + i) & ring->size_mask; + skb_frags_from = ring->rx_info + (from_index << priv->log_rx_info); + skb_frags_to = ring->rx_info + (to_index << priv->log_rx_info); + rx_desc_from = ring->buf + (from_index << ring->log_stride); + rx_desc_to = ring->buf + (to_index << ring->log_stride); + + for (nr = 0; nr < priv->num_frags; nr++) { + skb_frags_to[nr].page = skb_frags_from[nr].page; + skb_frags_to[nr].page_offset = skb_frags_from[nr].page_offset; + rx_desc_to->data[nr].addr = rx_desc_from->data[nr].addr; + } + } +} + + +int mlx4_en_process_rx_cq(struct net_device *dev, struct mlx4_en_cq *cq, int budget) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_cqe *cqe; + struct mlx4_en_rx_ring *ring = &priv->rx_ring[cq->ring]; + struct skb_frag_struct *skb_frags; + struct skb_frag_struct lro_frags[MLX4_EN_MAX_RX_FRAGS]; + struct mlx4_en_rx_desc *rx_desc; + struct sk_buff *skb; + int index; + int nr; + unsigned int length; + int polled = 0; + int ip_summed; + + if (!priv->port_up) + return 0; + + /* We assume a 1:1 mapping between CQEs and Rx descriptors, so Rx + * descriptor offset can be deduced from the CQE index instead of + * reading 'cqe->index' */ + index = cq->mcq.cons_index & ring->size_mask; + cqe = &cq->buf[index]; + + /* Process all completed CQEs */ + while (XNOR(cqe->owner_sr_opcode & MLX4_CQE_OWNER_MASK, + cq->mcq.cons_index & cq->size)) { + + skb_frags = ring->rx_info + (index << priv->log_rx_info); + rx_desc = ring->buf + (index << ring->log_stride); + + /* + * make sure we read the CQE after we read the ownership bit + */ + rmb(); + + /* Drop packet on bad receive or bad checksum */ + if (unlikely((cqe->owner_sr_opcode & MLX4_CQE_OPCODE_MASK) == + MLX4_CQE_OPCODE_ERROR)) { + mlx4_err(mdev, "CQE completed in error - vendor " + "syndrom:%d syndrom:%d\n", + ((struct mlx4_err_cqe *) cqe)->vendor_err_syndrome, + ((struct mlx4_err_cqe *) cqe)->syndrome); + goto next; + } + if (unlikely(cqe->badfcs_enc & MLX4_CQE_BAD_FCS)) { + mlx4_dbg(RX_ERR, priv, "Accepted frame with bad FCS\n"); + goto next; + } + + /* + * Packet is OK - process it. + */ + length = be32_to_cpu(cqe->byte_cnt); + ring->bytes += length; + ring->packets++; + + if (likely(priv->rx_csum)) { + if ((cqe->status & cpu_to_be16(MLX4_CQE_STATUS_IPOK)) && + (cqe->checksum == cpu_to_be16(0xffff))) { + priv->port_stats.rx_chksum_good++; + /* This packet is eligible for LRO if it is: + * - DIX Ethernet (type interpretation) + * - TCP/IP (v4) + * - without IP options + * - not an IP fragment */ + if (mlx4_en_can_lro(cqe->status) && + dev->features & NETIF_F_LRO) { + + nr = mlx4_en_complete_rx_desc( + priv, rx_desc, + skb_frags, lro_frags, + ring->page_alloc, length); + if (!nr) + goto next; + + if (priv->vlgrp && (cqe->vlan_my_qpn & + cpu_to_be32(MLX4_CQE_VLAN_PRESENT_MASK))) { + lro_vlan_hwaccel_receive_frags( + &ring->lro, lro_frags, + length, length, + priv->vlgrp, + be16_to_cpu(cqe->sl_vid), + NULL, 0); + } else + lro_receive_frags(&ring->lro, + lro_frags, + length, + length, + NULL, 0); + + goto next; + } + + /* LRO not possible, complete processing here */ + ip_summed = CHECKSUM_UNNECESSARY; + INC_PERF_COUNTER(priv->pstats.lro_misses); + } else { + ip_summed = CHECKSUM_NONE; + priv->port_stats.rx_chksum_none++; + } + } else { + ip_summed = CHECKSUM_NONE; + priv->port_stats.rx_chksum_none++; + } + + skb = mlx4_en_rx_skb(priv, rx_desc, skb_frags, + ring->page_alloc, length); + if (!skb) { + priv->stats.rx_dropped++; + goto next; + } + + skb->ip_summed = ip_summed; + skb->protocol = eth_type_trans(skb, dev); + + /* Push it up the stack */ + if (priv->vlgrp && (be32_to_cpu(cqe->vlan_my_qpn) & + MLX4_CQE_VLAN_PRESENT_MASK)) { + vlan_hwaccel_receive_skb(skb, priv->vlgrp, + be16_to_cpu(cqe->sl_vid)); + } else + netif_receive_skb(skb); + + dev->last_rx = jiffies; + +next: + ++cq->mcq.cons_index; + index = (cq->mcq.cons_index) & ring->size_mask; + cqe = &cq->buf[index]; + if (++polled == budget) { + /* We are here because we reached the NAPI budget - + * flush only pending LRO sessions */ + lro_flush_all(&ring->lro); + goto out; + } + } + + /* If CQ is empty flush all LRO sessions unconditionally */ + lro_flush_all(&ring->lro); + +out: + AVG_PERF_COUNTER(priv->pstats.rx_coal_avg, polled); + mlx4_cq_set_ci(&cq->mcq); + wmb(); /* ensure HW sees CQ consumer before we post new buffers */ + ring->cons = cq->mcq.cons_index; + ring->prod += polled; /* Polled descriptors were realocated in place */ + if (unlikely(!ring->full)) { + mlx4_en_copy_desc(priv, ring, ring->cons - polled, + ring->prod - polled, polled); + mlx4_en_fill_rx_buf(dev, ring); + } + mlx4_en_update_rx_prod_db(ring); + return polled; +} + + +void mlx4_en_rx_irq(struct mlx4_cq *mcq) +{ + struct mlx4_en_cq *cq = container_of(mcq, struct mlx4_en_cq, mcq); + struct mlx4_en_priv *priv = netdev_priv(cq->dev); + + if (priv->port_up) + netif_rx_schedule(cq->dev, &cq->napi); + else + mlx4_en_arm_cq(priv, cq); +} + +/* Rx CQ polling - called by NAPI */ +int mlx4_en_poll_rx_cq(struct napi_struct *napi, int budget) +{ + struct mlx4_en_cq *cq = container_of(napi, struct mlx4_en_cq, napi); + struct net_device *dev = cq->dev; + struct mlx4_en_priv *priv = netdev_priv(dev); + int done; + + done = mlx4_en_process_rx_cq(dev, cq, budget); + + /* If we used up all the quota - we're probably not done yet... */ + if (done == budget) + INC_PERF_COUNTER(priv->pstats.napi_quota); + else { + /* Done for now */ + netif_rx_complete(dev, napi); + mlx4_en_arm_cq(priv, cq); + } + return done; +} + + +/* Calculate the last offset position that accomodates a full fragment + * (assuming fagment size = stride-align) */ +static int mlx4_en_last_alloc_offset(struct mlx4_en_priv *priv, u16 stride, u16 align) +{ + u16 res = MLX4_EN_ALLOC_SIZE % stride; + u16 offset = MLX4_EN_ALLOC_SIZE - stride - res + align; + + mlx4_dbg(DRV, priv, "Calculated last offset for stride:%d align:%d " + "res:%d offset:%d\n", stride, align, res, offset); + return offset; +} + + +static int frag_sizes[] = { + FRAG_SZ0, + FRAG_SZ1, + FRAG_SZ2, + FRAG_SZ3 +}; + +void mlx4_en_calc_rx_buf(struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + int eff_mtu = dev->mtu + ETH_HLEN + VLAN_HLEN + ETH_LLC_SNAP_SIZE; + int buf_size = 0; + int i = 0; + + while (buf_size < eff_mtu) { + priv->frag_info[i].frag_size = + (eff_mtu > buf_size + frag_sizes[i]) ? + frag_sizes[i] : eff_mtu - buf_size; + priv->frag_info[i].frag_prefix_size = buf_size; + if (!i) { + priv->frag_info[i].frag_align = NET_IP_ALIGN; + priv->frag_info[i].frag_stride = + ALIGN(frag_sizes[i] + NET_IP_ALIGN, SMP_CACHE_BYTES); + } else { + priv->frag_info[i].frag_align = 0; + priv->frag_info[i].frag_stride = + ALIGN(frag_sizes[i], SMP_CACHE_BYTES); + } + priv->frag_info[i].last_offset = mlx4_en_last_alloc_offset( + priv, priv->frag_info[i].frag_stride, + priv->frag_info[i].frag_align); + buf_size += priv->frag_info[i].frag_size; + i++; + } + + priv->num_frags = i; + priv->rx_skb_size = eff_mtu; + priv->log_rx_info = ROUNDUP_LOG2(i * sizeof(struct skb_frag_struct)); + + mlx4_dbg(DRV, priv, "Rx buffer scatter-list (effective-mtu:%d " + "num_frags:%d):\n", eff_mtu, priv->num_frags); + for (i = 0; i < priv->num_frags; i++) { + mlx4_dbg(DRV, priv, " frag:%d - size:%d prefix:%d align:%d " + "stride:%d last_offset:%d\n", i, + priv->frag_info[i].frag_size, + priv->frag_info[i].frag_prefix_size, + priv->frag_info[i].frag_align, + priv->frag_info[i].frag_stride, + priv->frag_info[i].last_offset); + } +} + +/* RSS related functions */ + +/* Calculate rss size and map each entry in rss table to rx ring */ +void mlx4_en_set_default_rss_map(struct mlx4_en_priv *priv, + struct mlx4_en_rss_map *rss_map, + int num_entries, int num_rings) +{ + int i; + + rss_map->size = roundup_pow_of_two(num_entries); + mlx4_dbg(DRV, priv, "Setting default RSS map of %d entires\n", + rss_map->size); + + for (i = 0; i < rss_map->size; i++) { + rss_map->map[i] = i % num_rings; + mlx4_dbg(DRV, priv, "Entry %d ---> ring %d\n", i, rss_map->map[i]); + } +} + +static void mlx4_en_sqp_event(struct mlx4_qp *qp, enum mlx4_event event) +{ + return; +} + + +static int mlx4_en_config_rss_qp(struct mlx4_en_priv *priv, + int qpn, int srqn, int cqn, + enum mlx4_qp_state *state, + struct mlx4_qp *qp) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_qp_context *context; + int err = 0; + + context = kmalloc(sizeof *context , GFP_KERNEL); + if (!context) { + mlx4_err(mdev, "Failed to allocate qp context\n"); + return -ENOMEM; + } + + err = mlx4_qp_alloc(mdev->dev, qpn, qp); + if (err) { + mlx4_err(mdev, "Failed to allocate qp #%d\n", qpn); + goto out; + return err; + } + qp->event = mlx4_en_sqp_event; + + memset(context, 0, sizeof *context); + mlx4_en_fill_qp_context(priv, 0, 0, 0, 0, qpn, cqn, srqn, context); + + err = mlx4_qp_to_ready(mdev->dev, &priv->res.mtt, context, qp, state); + if (err) { + mlx4_qp_remove(mdev->dev, qp); + mlx4_qp_free(mdev->dev, qp); + } +out: + kfree(context); + return err; +} + +/* Allocate rx qp's and configure them according to rss map */ +int mlx4_en_config_rss_steer(struct mlx4_en_priv *priv) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_rss_map *rss_map = &priv->rss_map; + struct mlx4_qp_context context; + struct mlx4_en_rss_context *rss_context; + void *ptr; + int rss_xor = mdev->profile.rss_xor; + u8 rss_mask = mdev->profile.rss_mask; + int i, srqn, qpn, cqn; + int err = 0; + int good_qps = 0; + + mlx4_dbg(DRV, priv, "Configuring rss steering for port %u\n", priv->port); + err = mlx4_qp_reserve_range(mdev->dev, rss_map->size, + rss_map->size, &rss_map->base_qpn); + if (err) { + mlx4_err(mdev, "Failed reserving %d qps for port %u\n", + rss_map->size, priv->port); + return err; + } + + for (i = 0; i < rss_map->size; i++) { + cqn = priv->rx_ring[rss_map->map[i]].cqn; + srqn = priv->rx_ring[rss_map->map[i]].srq.srqn; + qpn = rss_map->base_qpn + i; + err = mlx4_en_config_rss_qp(priv, qpn, srqn, cqn, + &rss_map->state[i], + &rss_map->qps[i]); + if (err) + goto rss_err; + + ++good_qps; + } + + /* Configure RSS indirection qp */ + err = mlx4_qp_reserve_range(mdev->dev, 1, 1, &priv->base_qpn); + if (err) { + mlx4_err(mdev, "Failed to reserve range for RSS " + "indirection qp\n"); + goto rss_err; + } + err = mlx4_qp_alloc(mdev->dev, priv->base_qpn, &rss_map->indir_qp); + if (err) { + mlx4_err(mdev, "Failed to allocate RSS indirection QP\n"); + goto reserve_err; + } + rss_map->indir_qp.event = mlx4_en_sqp_event; + mlx4_en_fill_qp_context(priv, 0, 0, 0, 1, priv->base_qpn, + priv->rx_ring[0].cqn, 0, &context); + + ptr = ((void *) &context) + 0x3c; + rss_context = (struct mlx4_en_rss_context *) ptr; + rss_context->base_qpn = cpu_to_be32(ilog2(rss_map->size) << 24 | + (rss_map->base_qpn)); + rss_context->default_qpn = cpu_to_be32(rss_map->base_qpn); + rss_context->hash_fn = rss_xor & 0x3; + rss_context->flags = rss_mask << 2; + + err = mlx4_qp_to_ready(mdev->dev, &priv->res.mtt, &context, + &rss_map->indir_qp, &rss_map->indir_state); + if (err) + goto indir_err; + + return 0; + +indir_err: + mlx4_qp_modify(mdev->dev, NULL, rss_map->indir_state, + MLX4_QP_STATE_RST, NULL, 0, 0, &rss_map->indir_qp); + mlx4_qp_remove(mdev->dev, &rss_map->indir_qp); + mlx4_qp_free(mdev->dev, &rss_map->indir_qp); +reserve_err: + mlx4_qp_release_range(mdev->dev, priv->base_qpn, 1); +rss_err: + for (i = 0; i < good_qps; i++) { + mlx4_qp_modify(mdev->dev, NULL, rss_map->state[i], + MLX4_QP_STATE_RST, NULL, 0, 0, &rss_map->qps[i]); + mlx4_qp_remove(mdev->dev, &rss_map->qps[i]); + mlx4_qp_free(mdev->dev, &rss_map->qps[i]); + } + mlx4_qp_release_range(mdev->dev, rss_map->base_qpn, rss_map->size); + return err; +} + +void mlx4_en_release_rss_steer(struct mlx4_en_priv *priv) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_rss_map *rss_map = &priv->rss_map; + int i; + + mlx4_qp_modify(mdev->dev, NULL, rss_map->indir_state, + MLX4_QP_STATE_RST, NULL, 0, 0, &rss_map->indir_qp); + mlx4_qp_remove(mdev->dev, &rss_map->indir_qp); + mlx4_qp_free(mdev->dev, &rss_map->indir_qp); + mlx4_qp_release_range(mdev->dev, priv->base_qpn, 1); + + for (i = 0; i < rss_map->size; i++) { + mlx4_qp_modify(mdev->dev, NULL, rss_map->state[i], + MLX4_QP_STATE_RST, NULL, 0, 0, &rss_map->qps[i]); + mlx4_qp_remove(mdev->dev, &rss_map->qps[i]); + mlx4_qp_free(mdev->dev, &rss_map->qps[i]); + } + mlx4_qp_release_range(mdev->dev, rss_map->base_qpn, rss_map->size); +} + + + + + diff --git a/drivers/net/mlx4/en_tx.c b/drivers/net/mlx4/en_tx.c new file mode 100644 index 000000000000..8592f8fb8475 --- /dev/null +++ b/drivers/net/mlx4/en_tx.c @@ -0,0 +1,820 @@ +/* + * Copyright (c) 2007 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#include <asm/page.h> +#include <linux/mlx4/cq.h> +#include <linux/mlx4/qp.h> +#include <linux/skbuff.h> +#include <linux/if_vlan.h> +#include <linux/vmalloc.h> + +#include "mlx4_en.h" + +enum { + MAX_INLINE = 104, /* 128 - 16 - 4 - 4 */ +}; + +static int inline_thold __read_mostly = MAX_INLINE; + +module_param_named(inline_thold, inline_thold, int, 0444); +MODULE_PARM_DESC(inline_thold, "treshold for using inline data"); + +int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_tx_ring *ring, u32 size, + u16 stride) +{ + struct mlx4_en_dev *mdev = priv->mdev; + int tmp; + int err; + + ring->size = size; + ring->size_mask = size - 1; + ring->stride = stride; + + inline_thold = min(inline_thold, MAX_INLINE); + + spin_lock_init(&ring->comp_lock); + + tmp = size * sizeof(struct mlx4_en_tx_info); + ring->tx_info = vmalloc(tmp); + if (!ring->tx_info) { + mlx4_err(mdev, "Failed allocating tx_info ring\n"); + return -ENOMEM; + } + mlx4_dbg(DRV, priv, "Allocated tx_info ring at addr:%p size:%d\n", + ring->tx_info, tmp); + + ring->bounce_buf = kmalloc(MAX_DESC_SIZE, GFP_KERNEL); + if (!ring->bounce_buf) { + mlx4_err(mdev, "Failed allocating bounce buffer\n"); + err = -ENOMEM; + goto err_tx; + } + ring->buf_size = ALIGN(size * ring->stride, MLX4_EN_PAGE_SIZE); + + err = mlx4_alloc_hwq_res(mdev->dev, &ring->wqres, ring->buf_size, + 2 * PAGE_SIZE); + if (err) { + mlx4_err(mdev, "Failed allocating hwq resources\n"); + goto err_bounce; + } + + err = mlx4_en_map_buffer(&ring->wqres.buf); + if (err) { + mlx4_err(mdev, "Failed to map TX buffer\n"); + goto err_hwq_res; + } + + ring->buf = ring->wqres.buf.direct.buf; + + mlx4_dbg(DRV, priv, "Allocated TX ring (addr:%p) - buf:%p size:%d " + "buf_size:%d dma:%llx\n", ring, ring->buf, ring->size, + ring->buf_size, (unsigned long long) ring->wqres.buf.direct.map); + + err = mlx4_qp_reserve_range(mdev->dev, 1, 1, &ring->qpn); + if (err) { + mlx4_err(mdev, "Failed reserving qp for tx ring.\n"); + goto err_map; + } + + err = mlx4_qp_alloc(mdev->dev, ring->qpn, &ring->qp); + if (err) { + mlx4_err(mdev, "Failed allocating qp %d\n", ring->qpn); + goto err_reserve; + } + + return 0; + +err_reserve: + mlx4_qp_release_range(mdev->dev, ring->qpn, 1); +err_map: + mlx4_en_unmap_buffer(&ring->wqres.buf); +err_hwq_res: + mlx4_free_hwq_res(mdev->dev, &ring->wqres, ring->buf_size); +err_bounce: + kfree(ring->bounce_buf); + ring->bounce_buf = NULL; +err_tx: + vfree(ring->tx_info); + ring->tx_info = NULL; + return err; +} + +void mlx4_en_destroy_tx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_tx_ring *ring) +{ + struct mlx4_en_dev *mdev = priv->mdev; + mlx4_dbg(DRV, priv, "Destroying tx ring, qpn: %d\n", ring->qpn); + + mlx4_qp_remove(mdev->dev, &ring->qp); + mlx4_qp_free(mdev->dev, &ring->qp); + mlx4_qp_release_range(mdev->dev, ring->qpn, 1); + mlx4_en_unmap_buffer(&ring->wqres.buf); + mlx4_free_hwq_res(mdev->dev, &ring->wqres, ring->buf_size); + kfree(ring->bounce_buf); + ring->bounce_buf = NULL; + vfree(ring->tx_info); + ring->tx_info = NULL; +} + +int mlx4_en_activate_tx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_tx_ring *ring, + int cq, int srqn) +{ + struct mlx4_en_dev *mdev = priv->mdev; + int err; + + ring->cqn = cq; + ring->prod = 0; + ring->cons = 0xffffffff; + ring->last_nr_txbb = 1; + ring->poll_cnt = 0; + ring->blocked = 0; + memset(ring->tx_info, 0, ring->size * sizeof(struct mlx4_en_tx_info)); + memset(ring->buf, 0, ring->buf_size); + + ring->qp_state = MLX4_QP_STATE_RST; + ring->doorbell_qpn = swab32(ring->qp.qpn << 8); + + mlx4_en_fill_qp_context(priv, ring->size, ring->stride, 1, 0, ring->qpn, + ring->cqn, srqn, &ring->context); + + err = mlx4_qp_to_ready(mdev->dev, &ring->wqres.mtt, &ring->context, + &ring->qp, &ring->qp_state); + + return err; +} + +void mlx4_en_deactivate_tx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_tx_ring *ring) +{ + struct mlx4_en_dev *mdev = priv->mdev; + + mlx4_qp_modify(mdev->dev, NULL, ring->qp_state, + MLX4_QP_STATE_RST, NULL, 0, 0, &ring->qp); +} + + +static u32 mlx4_en_free_tx_desc(struct mlx4_en_priv *priv, + struct mlx4_en_tx_ring *ring, + int index, u8 owner) +{ + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_tx_info *tx_info = &ring->tx_info[index]; + struct mlx4_en_tx_desc *tx_desc = ring->buf + index * TXBB_SIZE; + struct mlx4_wqe_data_seg *data = (void *) tx_desc + tx_info->data_offset; + struct sk_buff *skb = tx_info->skb; + struct skb_frag_struct *frag; + void *end = ring->buf + ring->buf_size; + int frags = skb_shinfo(skb)->nr_frags; + int i; + __be32 *ptr = (__be32 *)tx_desc; + __be32 stamp = cpu_to_be32(STAMP_VAL | (!!owner << STAMP_SHIFT)); + + /* Optimize the common case when there are no wraparounds */ + if (likely((void *) tx_desc + tx_info->nr_txbb * TXBB_SIZE <= end)) { + if (tx_info->linear) { + pci_unmap_single(mdev->pdev, + (dma_addr_t) be64_to_cpu(data->addr), + be32_to_cpu(data->byte_count), + PCI_DMA_TODEVICE); + ++data; + } + + for (i = 0; i < frags; i++) { + frag = &skb_shinfo(skb)->frags[i]; + pci_unmap_page(mdev->pdev, + (dma_addr_t) be64_to_cpu(data[i].addr), + frag->size, PCI_DMA_TODEVICE); + } + /* Stamp the freed descriptor */ + for (i = 0; i < tx_info->nr_txbb * TXBB_SIZE; i += STAMP_STRIDE) { + *ptr = stamp; + ptr += STAMP_DWORDS; + } + + } else { + if ((void *) data >= end) { + data = (struct mlx4_wqe_data_seg *) + (ring->buf + ((void *) data - end)); + } + + if (tx_info->linear) { + pci_unmap_single(mdev->pdev, + (dma_addr_t) be64_to_cpu(data->addr), + be32_to_cpu(data->byte_count), + PCI_DMA_TODEVICE); + ++data; + } + + for (i = 0; i < frags; i++) { + /* Check for wraparound before unmapping */ + if ((void *) data >= end) + data = (struct mlx4_wqe_data_seg *) ring->buf; + frag = &skb_shinfo(skb)->frags[i]; + pci_unmap_page(mdev->pdev, + (dma_addr_t) be64_to_cpu(data->addr), + frag->size, PCI_DMA_TODEVICE); + } + /* Stamp the freed descriptor */ + for (i = 0; i < tx_info->nr_txbb * TXBB_SIZE; i += STAMP_STRIDE) { + *ptr = stamp; + ptr += STAMP_DWORDS; + if ((void *) ptr >= end) { + ptr = ring->buf; + stamp ^= cpu_to_be32(0x80000000); + } + } + + } + dev_kfree_skb_any(skb); + return tx_info->nr_txbb; +} + + +int mlx4_en_free_tx_buf(struct net_device *dev, struct mlx4_en_tx_ring *ring) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + int cnt = 0; + + /* Skip last polled descriptor */ + ring->cons += ring->last_nr_txbb; + mlx4_dbg(DRV, priv, "Freeing Tx buf - cons:0x%x prod:0x%x\n", + ring->cons, ring->prod); + + if ((u32) (ring->prod - ring->cons) > ring->size) { + if (netif_msg_tx_err(priv)) + mlx4_warn(priv->mdev, "Tx consumer passed producer!\n"); + return 0; + } + + while (ring->cons != ring->prod) { + ring->last_nr_txbb = mlx4_en_free_tx_desc(priv, ring, + ring->cons & ring->size_mask, + !!(ring->cons & ring->size)); + ring->cons += ring->last_nr_txbb; + cnt++; + } + + if (cnt) + mlx4_dbg(DRV, priv, "Freed %d uncompleted tx descriptors\n", cnt); + + return cnt; +} + +void mlx4_en_set_prio_map(struct mlx4_en_priv *priv, u16 *prio_map, u32 ring_num) +{ + int block = 8 / ring_num; + int extra = 8 - (block * ring_num); + int num = 0; + u16 ring = 1; + int prio; + + if (ring_num == 1) { + for (prio = 0; prio < 8; prio++) + prio_map[prio] = 0; + return; + } + + for (prio = 0; prio < 8; prio++) { + if (extra && (num == block + 1)) { + ring++; + num = 0; + extra--; + } else if (!extra && (num == block)) { + ring++; + num = 0; + } + prio_map[prio] = ring; + mlx4_dbg(DRV, priv, " prio:%d --> ring:%d\n", prio, ring); + num++; + } +} + +static void mlx4_en_process_tx_cq(struct net_device *dev, struct mlx4_en_cq *cq) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_cq *mcq = &cq->mcq; + struct mlx4_en_tx_ring *ring = &priv->tx_ring[cq->ring]; + struct mlx4_cqe *cqe = cq->buf; + u16 index; + u16 new_index; + u32 txbbs_skipped = 0; + u32 cq_last_sav; + + /* index always points to the first TXBB of the last polled descriptor */ + index = ring->cons & ring->size_mask; + new_index = be16_to_cpu(cqe->wqe_index) & ring->size_mask; + if (index == new_index) + return; + + if (!priv->port_up) + return; + + /* + * We use a two-stage loop: + * - the first samples the HW-updated CQE + * - the second frees TXBBs until the last sample + * This lets us amortize CQE cache misses, while still polling the CQ + * until is quiescent. + */ + cq_last_sav = mcq->cons_index; + do { + do { + /* Skip over last polled CQE */ + index = (index + ring->last_nr_txbb) & ring->size_mask; + txbbs_skipped += ring->last_nr_txbb; + + /* Poll next CQE */ + ring->last_nr_txbb = mlx4_en_free_tx_desc( + priv, ring, index, + !!((ring->cons + txbbs_skipped) & + ring->size)); + ++mcq->cons_index; + + } while (index != new_index); + + new_index = be16_to_cpu(cqe->wqe_index) & ring->size_mask; + } while (index != new_index); + AVG_PERF_COUNTER(priv->pstats.tx_coal_avg, + (u32) (mcq->cons_index - cq_last_sav)); + + /* + * To prevent CQ overflow we first update CQ consumer and only then + * the ring consumer. + */ + mlx4_cq_set_ci(mcq); + wmb(); + ring->cons += txbbs_skipped; + + /* Wakeup Tx queue if this ring stopped it */ + if (unlikely(ring->blocked)) { + if (((u32) (ring->prod - ring->cons) <= + ring->size - HEADROOM - MAX_DESC_TXBBS) && !cq->armed) { + + /* TODO: support multiqueue netdevs. Currently, we block + * when *any* ring is full. Note that: + * - 2 Tx rings can unblock at the same time and call + * netif_wake_queue(), which is OK since this + * operation is idempotent. + * - We might wake the queue just after another ring + * stopped it. This is no big deal because the next + * transmission on that ring would stop the queue. + */ + ring->blocked = 0; + netif_wake_queue(dev); + priv->port_stats.wake_queue++; + } + } +} + +void mlx4_en_tx_irq(struct mlx4_cq *mcq) +{ + struct mlx4_en_cq *cq = container_of(mcq, struct mlx4_en_cq, mcq); + struct mlx4_en_priv *priv = netdev_priv(cq->dev); + struct mlx4_en_tx_ring *ring = &priv->tx_ring[cq->ring]; + + spin_lock_irq(&ring->comp_lock); + cq->armed = 0; + mlx4_en_process_tx_cq(cq->dev, cq); + if (ring->blocked) + mlx4_en_arm_cq(priv, cq); + else + mod_timer(&cq->timer, jiffies + 1); + spin_unlock_irq(&ring->comp_lock); +} + + +void mlx4_en_poll_tx_cq(unsigned long data) +{ + struct mlx4_en_cq *cq = (struct mlx4_en_cq *) data; + struct mlx4_en_priv *priv = netdev_priv(cq->dev); + struct mlx4_en_tx_ring *ring = &priv->tx_ring[cq->ring]; + u32 inflight; + + INC_PERF_COUNTER(priv->pstats.tx_poll); + + netif_tx_lock(priv->dev); + spin_lock_irq(&ring->comp_lock); + mlx4_en_process_tx_cq(cq->dev, cq); + inflight = (u32) (ring->prod - ring->cons - ring->last_nr_txbb); + + /* If there are still packets in flight and the timer has not already + * been scheduled by the Tx routine then schedule it here to guarantee + * completion processing of these packets */ + if (inflight && priv->port_up) + mod_timer(&cq->timer, jiffies + MLX4_EN_TX_POLL_TIMEOUT); + + spin_unlock_irq(&ring->comp_lock); + netif_tx_unlock(priv->dev); +} + +static struct mlx4_en_tx_desc *mlx4_en_bounce_to_desc(struct mlx4_en_priv *priv, + struct mlx4_en_tx_ring *ring, + u32 index, + unsigned int desc_size) +{ + u32 copy = (ring->size - index) * TXBB_SIZE; + int i; + + for (i = desc_size - copy - 4; i >= 0; i -= 4) { + if ((i & (TXBB_SIZE - 1)) == 0) + wmb(); + + *((u32 *) (ring->buf + i)) = + *((u32 *) (ring->bounce_buf + copy + i)); + } + + for (i = copy - 4; i >= 4 ; i -= 4) { + if ((i & (TXBB_SIZE - 1)) == 0) + wmb(); + + *((u32 *) (ring->buf + index * TXBB_SIZE + i)) = + *((u32 *) (ring->bounce_buf + i)); + } + + /* Return real descriptor location */ + return ring->buf + index * TXBB_SIZE; +} + +static inline void mlx4_en_xmit_poll(struct mlx4_en_priv *priv, int tx_ind) +{ + struct mlx4_en_cq *cq = &priv->tx_cq[tx_ind]; + struct mlx4_en_tx_ring *ring = &priv->tx_ring[tx_ind]; + + /* If we don't have a pending timer, set one up to catch our recent + post in case the interface becomes idle */ + if (!timer_pending(&cq->timer)) + mod_timer(&cq->timer, jiffies + MLX4_EN_TX_POLL_TIMEOUT); + + /* Poll the CQ every mlx4_en_TX_MODER_POLL packets */ + if ((++ring->poll_cnt & (MLX4_EN_TX_POLL_MODER - 1)) == 0) + mlx4_en_process_tx_cq(priv->dev, cq); +} + +static void *get_frag_ptr(struct sk_buff *skb) +{ + struct skb_frag_struct *frag = &skb_shinfo(skb)->frags[0]; + struct page *page = frag->page; + void *ptr; + + ptr = page_address(page); + if (unlikely(!ptr)) + return NULL; + + return ptr + frag->page_offset; +} + +static int is_inline(struct sk_buff *skb, void **pfrag) +{ + void *ptr; + + if (inline_thold && !skb_is_gso(skb) && skb->len <= inline_thold) { + if (skb_shinfo(skb)->nr_frags == 1) { + ptr = get_frag_ptr(skb); + if (unlikely(!ptr)) + return 0; + + if (pfrag) + *pfrag = ptr; + + return 1; + } else if (unlikely(skb_shinfo(skb)->nr_frags)) + return 0; + else + return 1; + } + + return 0; +} + +static int inline_size(struct sk_buff *skb) +{ + if (skb->len + CTRL_SIZE + sizeof(struct mlx4_wqe_inline_seg) + <= MLX4_INLINE_ALIGN) + return ALIGN(skb->len + CTRL_SIZE + + sizeof(struct mlx4_wqe_inline_seg), 16); + else + return ALIGN(skb->len + CTRL_SIZE + 2 * + sizeof(struct mlx4_wqe_inline_seg), 16); +} + +static int get_real_size(struct sk_buff *skb, struct net_device *dev, + int *lso_header_size) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + int real_size; + + if (skb_is_gso(skb)) { + *lso_header_size = skb_transport_offset(skb) + tcp_hdrlen(skb); + real_size = CTRL_SIZE + skb_shinfo(skb)->nr_frags * DS_SIZE + + ALIGN(*lso_header_size + 4, DS_SIZE); + if (unlikely(*lso_header_size != skb_headlen(skb))) { + /* We add a segment for the skb linear buffer only if + * it contains data */ + if (*lso_header_size < skb_headlen(skb)) + real_size += DS_SIZE; + else { + if (netif_msg_tx_err(priv)) + mlx4_warn(mdev, "Non-linear headers\n"); + dev_kfree_skb_any(skb); + return 0; + } + } + if (unlikely(*lso_header_size > MAX_LSO_HDR_SIZE)) { + if (netif_msg_tx_err(priv)) + mlx4_warn(mdev, "LSO header size too big\n"); + dev_kfree_skb_any(skb); + return 0; + } + } else { + *lso_header_size = 0; + if (!is_inline(skb, NULL)) + real_size = CTRL_SIZE + (skb_shinfo(skb)->nr_frags + 1) * DS_SIZE; + else + real_size = inline_size(skb); + } + + return real_size; +} + +static void build_inline_wqe(struct mlx4_en_tx_desc *tx_desc, struct sk_buff *skb, + int real_size, u16 *vlan_tag, int tx_ind, void *fragptr) +{ + struct mlx4_wqe_inline_seg *inl = &tx_desc->inl; + int spc = MLX4_INLINE_ALIGN - CTRL_SIZE - sizeof *inl; + + if (skb->len <= spc) { + inl->byte_count = cpu_to_be32(1 << 31 | skb->len); + skb_copy_from_linear_data(skb, inl + 1, skb_headlen(skb)); + if (skb_shinfo(skb)->nr_frags) + memcpy(((void *)(inl + 1)) + skb_headlen(skb), fragptr, + skb_shinfo(skb)->frags[0].size); + + } else { + inl->byte_count = cpu_to_be32(1 << 31 | spc); + if (skb_headlen(skb) <= spc) { + skb_copy_from_linear_data(skb, inl + 1, skb_headlen(skb)); + if (skb_headlen(skb) < spc) { + memcpy(((void *)(inl + 1)) + skb_headlen(skb), + fragptr, spc - skb_headlen(skb)); + fragptr += spc - skb_headlen(skb); + } + inl = (void *) (inl + 1) + spc; + memcpy(((void *)(inl + 1)), fragptr, skb->len - spc); + } else { + skb_copy_from_linear_data(skb, inl + 1, spc); + inl = (void *) (inl + 1) + spc; + skb_copy_from_linear_data_offset(skb, spc, inl + 1, + skb_headlen(skb) - spc); + if (skb_shinfo(skb)->nr_frags) + memcpy(((void *)(inl + 1)) + skb_headlen(skb) - spc, + fragptr, skb_shinfo(skb)->frags[0].size); + } + + wmb(); + inl->byte_count = cpu_to_be32(1 << 31 | (skb->len - spc)); + } + tx_desc->ctrl.vlan_tag = cpu_to_be16(*vlan_tag); + tx_desc->ctrl.ins_vlan = MLX4_WQE_CTRL_INS_VLAN * !!(*vlan_tag); + tx_desc->ctrl.fence_size = (real_size / 16) & 0x3f; +} + +static int get_vlan_info(struct mlx4_en_priv *priv, struct sk_buff *skb, + u16 *vlan_tag) +{ + int tx_ind; + + /* Obtain VLAN information if present */ + if (priv->vlgrp && vlan_tx_tag_present(skb)) { + *vlan_tag = vlan_tx_tag_get(skb); + /* Set the Tx ring to use according to vlan priority */ + tx_ind = priv->tx_prio_map[*vlan_tag >> 13]; + } else { + *vlan_tag = 0; + tx_ind = 0; + } + return tx_ind; +} + +int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev) +{ + struct mlx4_en_priv *priv = netdev_priv(dev); + struct mlx4_en_dev *mdev = priv->mdev; + struct mlx4_en_tx_ring *ring; + struct mlx4_en_cq *cq; + struct mlx4_en_tx_desc *tx_desc; + struct mlx4_wqe_data_seg *data; + struct skb_frag_struct *frag; + struct mlx4_en_tx_info *tx_info; + int tx_ind = 0; + int nr_txbb; + int desc_size; + int real_size; + dma_addr_t dma; + u32 index; + __be32 op_own; + u16 vlan_tag; + int i; + int lso_header_size; + void *fragptr; + + if (unlikely(!skb->len)) { + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + real_size = get_real_size(skb, dev, &lso_header_size); + if (unlikely(!real_size)) + return NETDEV_TX_OK; + + /* Allign descriptor to TXBB size */ + desc_size = ALIGN(real_size, TXBB_SIZE); + nr_txbb = desc_size / TXBB_SIZE; + if (unlikely(nr_txbb > MAX_DESC_TXBBS)) { + if (netif_msg_tx_err(priv)) + mlx4_warn(mdev, "Oversized header or SG list\n"); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + tx_ind = get_vlan_info(priv, skb, &vlan_tag); + ring = &priv->tx_ring[tx_ind]; + + /* Check available TXBBs And 2K spare for prefetch */ + if (unlikely(((int)(ring->prod - ring->cons)) > + ring->size - HEADROOM - MAX_DESC_TXBBS)) { + /* every full Tx ring stops queue. + * TODO: implement multi-queue support (per-queue stop) */ + netif_stop_queue(dev); + ring->blocked = 1; + priv->port_stats.queue_stopped++; + + /* Use interrupts to find out when queue opened */ + cq = &priv->tx_cq[tx_ind]; + mlx4_en_arm_cq(priv, cq); + return NETDEV_TX_BUSY; + } + + /* Now that we know what Tx ring to use */ + if (unlikely(!priv->port_up)) { + if (netif_msg_tx_err(priv)) + mlx4_warn(mdev, "xmit: port down!\n"); + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; + } + + /* Track current inflight packets for performance analysis */ + AVG_PERF_COUNTER(priv->pstats.inflight_avg, + (u32) (ring->prod - ring->cons - 1)); + + /* Packet is good - grab an index and transmit it */ + index = ring->prod & ring->size_mask; + + /* See if we have enough space for whole descriptor TXBB for setting + * SW ownership on next descriptor; if not, use a bounce buffer. */ + if (likely(index + nr_txbb <= ring->size)) + tx_desc = ring->buf + index * TXBB_SIZE; + else + tx_desc = (struct mlx4_en_tx_desc *) ring->bounce_buf; + + /* Save skb in tx_info ring */ + tx_info = &ring->tx_info[index]; + tx_info->skb = skb; + tx_info->nr_txbb = nr_txbb; + + /* Prepare ctrl segement apart opcode+ownership, which depends on + * whether LSO is used */ + tx_desc->ctrl.vlan_tag = cpu_to_be16(vlan_tag); + tx_desc->ctrl.ins_vlan = MLX4_WQE_CTRL_INS_VLAN * !!vlan_tag; + tx_desc->ctrl.fence_size = (real_size / 16) & 0x3f; + tx_desc->ctrl.srcrb_flags = cpu_to_be32(MLX4_WQE_CTRL_CQ_UPDATE | + MLX4_WQE_CTRL_SOLICITED); + if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { + tx_desc->ctrl.srcrb_flags |= cpu_to_be32(MLX4_WQE_CTRL_IP_CSUM | + MLX4_WQE_CTRL_TCP_UDP_CSUM); + priv->port_stats.tx_chksum_offload++; + } + + /* Handle LSO (TSO) packets */ + if (lso_header_size) { + /* Mark opcode as LSO */ + op_own = cpu_to_be32(MLX4_OPCODE_LSO | (1 << 6)) | + ((ring->prod & ring->size) ? + cpu_to_be32(MLX4_EN_BIT_DESC_OWN) : 0); + + /* Fill in the LSO prefix */ + tx_desc->lso.mss_hdr_size = cpu_to_be32( + skb_shinfo(skb)->gso_size << 16 | lso_header_size); + + /* Copy headers; + * note that we already verified that it is linear */ + memcpy(tx_desc->lso.header, skb->data, lso_header_size); + data = ((void *) &tx_desc->lso + + ALIGN(lso_header_size + 4, DS_SIZE)); + + priv->port_stats.tso_packets++; + i = ((skb->len - lso_header_size) / skb_shinfo(skb)->gso_size) + + !!((skb->len - lso_header_size) % skb_shinfo(skb)->gso_size); + ring->bytes += skb->len + (i - 1) * lso_header_size; + ring->packets += i; + } else { + /* Normal (Non LSO) packet */ + op_own = cpu_to_be32(MLX4_OPCODE_SEND) | + ((ring->prod & ring->size) ? + cpu_to_be32(MLX4_EN_BIT_DESC_OWN) : 0); + data = &tx_desc->data; + ring->bytes += max(skb->len, (unsigned int) ETH_ZLEN); + ring->packets++; + + } + AVG_PERF_COUNTER(priv->pstats.tx_pktsz_avg, skb->len); + + + /* valid only for none inline segments */ + tx_info->data_offset = (void *) data - (void *) tx_desc; + + tx_info->linear = (lso_header_size < skb_headlen(skb) && !is_inline(skb, NULL)) ? 1 : 0; + data += skb_shinfo(skb)->nr_frags + tx_info->linear - 1; + + if (!is_inline(skb, &fragptr)) { + /* Map fragments */ + for (i = skb_shinfo(skb)->nr_frags - 1; i >= 0; i--) { + frag = &skb_shinfo(skb)->frags[i]; + dma = pci_map_page(mdev->dev->pdev, frag->page, frag->page_offset, + frag->size, PCI_DMA_TODEVICE); + data->addr = cpu_to_be64(dma); + data->lkey = cpu_to_be32(mdev->mr.key); + wmb(); + data->byte_count = cpu_to_be32(frag->size); + --data; + } + + /* Map linear part */ + if (tx_info->linear) { + dma = pci_map_single(mdev->dev->pdev, skb->data + lso_header_size, + skb_headlen(skb) - lso_header_size, PCI_DMA_TODEVICE); + data->addr = cpu_to_be64(dma); + data->lkey = cpu_to_be32(mdev->mr.key); + wmb(); + data->byte_count = cpu_to_be32(skb_headlen(skb) - lso_header_size); + } + } else + build_inline_wqe(tx_desc, skb, real_size, &vlan_tag, tx_ind, fragptr); + + ring->prod += nr_txbb; + + /* If we used a bounce buffer then copy descriptor back into place */ + if (tx_desc == (struct mlx4_en_tx_desc *) ring->bounce_buf) + tx_desc = mlx4_en_bounce_to_desc(priv, ring, index, desc_size); + + /* Run destructor before passing skb to HW */ + if (likely(!skb_shared(skb))) + skb_orphan(skb); + + /* Ensure new descirptor hits memory + * before setting ownership of this descriptor to HW */ + wmb(); + tx_desc->ctrl.owner_opcode = op_own; + + /* Ring doorbell! */ + wmb(); + writel(ring->doorbell_qpn, mdev->uar_map + MLX4_SEND_DOORBELL); + dev->trans_start = jiffies; + + /* Poll CQ here */ + mlx4_en_xmit_poll(priv, tx_ind); + + return 0; +} + diff --git a/drivers/net/mlx4/eq.c b/drivers/net/mlx4/eq.c index 8a8b56135a58..de169338cd90 100644 --- a/drivers/net/mlx4/eq.c +++ b/drivers/net/mlx4/eq.c @@ -558,7 +558,7 @@ int mlx4_init_eq_table(struct mlx4_dev *dev) int i; err = mlx4_bitmap_init(&priv->eq_table.bitmap, dev->caps.num_eqs, - dev->caps.num_eqs - 1, dev->caps.reserved_eqs); + dev->caps.num_eqs - 1, dev->caps.reserved_eqs, 0); if (err) return err; diff --git a/drivers/net/mlx4/fw.c b/drivers/net/mlx4/fw.c index 7e32955da982..be09fdb79cb8 100644 --- a/drivers/net/mlx4/fw.c +++ b/drivers/net/mlx4/fw.c @@ -88,6 +88,7 @@ static void dump_dev_cap_flags(struct mlx4_dev *dev, u32 flags) [ 8] = "P_Key violation counter", [ 9] = "Q_Key violation counter", [10] = "VMM", + [12] = "DPDP", [16] = "MW support", [17] = "APM support", [18] = "Atomic ops support", @@ -346,7 +347,7 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) MLX4_GET(field, outbox, QUERY_DEV_CAP_VL_PORT_OFFSET); dev_cap->max_vl[i] = field >> 4; MLX4_GET(field, outbox, QUERY_DEV_CAP_MTU_WIDTH_OFFSET); - dev_cap->max_mtu[i] = field >> 4; + dev_cap->ib_mtu[i] = field >> 4; dev_cap->max_port_width[i] = field & 0xf; MLX4_GET(field, outbox, QUERY_DEV_CAP_MAX_GID_OFFSET); dev_cap->max_gids[i] = 1 << (field & 0xf); @@ -354,9 +355,13 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) dev_cap->max_pkeys[i] = 1 << (field & 0xf); } } else { +#define QUERY_PORT_SUPPORTED_TYPE_OFFSET 0x00 #define QUERY_PORT_MTU_OFFSET 0x01 +#define QUERY_PORT_ETH_MTU_OFFSET 0x02 #define QUERY_PORT_WIDTH_OFFSET 0x06 #define QUERY_PORT_MAX_GID_PKEY_OFFSET 0x07 +#define QUERY_PORT_MAC_OFFSET 0x08 +#define QUERY_PORT_MAX_MACVLAN_OFFSET 0x0a #define QUERY_PORT_MAX_VL_OFFSET 0x0b for (i = 1; i <= dev_cap->num_ports; ++i) { @@ -365,8 +370,10 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) if (err) goto out; + MLX4_GET(field, outbox, QUERY_PORT_SUPPORTED_TYPE_OFFSET); + dev_cap->supported_port_types[i] = field & 3; MLX4_GET(field, outbox, QUERY_PORT_MTU_OFFSET); - dev_cap->max_mtu[i] = field & 0xf; + dev_cap->ib_mtu[i] = field & 0xf; MLX4_GET(field, outbox, QUERY_PORT_WIDTH_OFFSET); dev_cap->max_port_width[i] = field & 0xf; MLX4_GET(field, outbox, QUERY_PORT_MAX_GID_PKEY_OFFSET); @@ -374,6 +381,11 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) dev_cap->max_pkeys[i] = 1 << (field & 0xf); MLX4_GET(field, outbox, QUERY_PORT_MAX_VL_OFFSET); dev_cap->max_vl[i] = field & 0xf; + MLX4_GET(field, outbox, QUERY_PORT_MAX_MACVLAN_OFFSET); + dev_cap->log_max_macs[i] = field & 0xf; + dev_cap->log_max_vlans[i] = field >> 4; + MLX4_GET(dev_cap->eth_mtu[i], outbox, QUERY_PORT_ETH_MTU_OFFSET); + MLX4_GET(dev_cap->def_mac[i], outbox, QUERY_PORT_MAC_OFFSET); } } @@ -407,7 +419,7 @@ int mlx4_QUERY_DEV_CAP(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) mlx4_dbg(dev, "Max CQEs: %d, max WQEs: %d, max SRQ WQEs: %d\n", dev_cap->max_cq_sz, dev_cap->max_qp_sz, dev_cap->max_srq_sz); mlx4_dbg(dev, "Local CA ACK delay: %d, max MTU: %d, port width cap: %d\n", - dev_cap->local_ca_ack_delay, 128 << dev_cap->max_mtu[1], + dev_cap->local_ca_ack_delay, 128 << dev_cap->ib_mtu[1], dev_cap->max_port_width[1]); mlx4_dbg(dev, "Max SQ desc size: %d, max SQ S/G: %d\n", dev_cap->max_sq_desc_sz, dev_cap->max_sq_sg); @@ -819,7 +831,7 @@ int mlx4_INIT_PORT(struct mlx4_dev *dev, int port) flags |= (dev->caps.port_width_cap[port] & 0xf) << INIT_PORT_PORT_WIDTH_SHIFT; MLX4_PUT(inbox, flags, INIT_PORT_FLAGS_OFFSET); - field = 128 << dev->caps.mtu_cap[port]; + field = 128 << dev->caps.ib_mtu_cap[port]; MLX4_PUT(inbox, field, INIT_PORT_MTU_OFFSET); field = dev->caps.gid_table_len[port]; MLX4_PUT(inbox, field, INIT_PORT_MAX_GID_OFFSET); diff --git a/drivers/net/mlx4/fw.h b/drivers/net/mlx4/fw.h index decbb5c2ad41..526d7f30c041 100644 --- a/drivers/net/mlx4/fw.h +++ b/drivers/net/mlx4/fw.h @@ -66,11 +66,13 @@ struct mlx4_dev_cap { int local_ca_ack_delay; int num_ports; u32 max_msg_sz; - int max_mtu[MLX4_MAX_PORTS + 1]; + int ib_mtu[MLX4_MAX_PORTS + 1]; int max_port_width[MLX4_MAX_PORTS + 1]; int max_vl[MLX4_MAX_PORTS + 1]; int max_gids[MLX4_MAX_PORTS + 1]; int max_pkeys[MLX4_MAX_PORTS + 1]; + u64 def_mac[MLX4_MAX_PORTS + 1]; + u16 eth_mtu[MLX4_MAX_PORTS + 1]; u16 stat_rate_support; u32 flags; int reserved_uars; @@ -102,6 +104,9 @@ struct mlx4_dev_cap { u32 reserved_lkey; u64 max_icm_sz; int max_gso_sz; + u8 supported_port_types[MLX4_MAX_PORTS + 1]; + u8 log_max_macs[MLX4_MAX_PORTS + 1]; + u8 log_max_vlans[MLX4_MAX_PORTS + 1]; }; struct mlx4_adapter { diff --git a/drivers/net/mlx4/main.c b/drivers/net/mlx4/main.c index 1252a919de2e..468921b8f4b6 100644 --- a/drivers/net/mlx4/main.c +++ b/drivers/net/mlx4/main.c @@ -85,6 +85,57 @@ static struct mlx4_profile default_profile = { .num_mtt = 1 << 20, }; +static int log_num_mac = 2; +module_param_named(log_num_mac, log_num_mac, int, 0444); +MODULE_PARM_DESC(log_num_mac, "Log2 max number of MACs per ETH port (1-7)"); + +static int log_num_vlan; +module_param_named(log_num_vlan, log_num_vlan, int, 0444); +MODULE_PARM_DESC(log_num_vlan, "Log2 max number of VLANs per ETH port (0-7)"); + +static int use_prio; +module_param_named(use_prio, use_prio, bool, 0444); +MODULE_PARM_DESC(use_prio, "Enable steering by VLAN priority on ETH ports " + "(0/1, default 0)"); + +static int mlx4_check_port_params(struct mlx4_dev *dev, + enum mlx4_port_type *port_type) +{ + int i; + + for (i = 0; i < dev->caps.num_ports - 1; i++) { + if (port_type[i] != port_type[i+1] && + !(dev->caps.flags & MLX4_DEV_CAP_FLAG_DPDP)) { + mlx4_err(dev, "Only same port types supported " + "on this HCA, aborting.\n"); + return -EINVAL; + } + } + if ((port_type[0] == MLX4_PORT_TYPE_ETH) && + (port_type[1] == MLX4_PORT_TYPE_IB)) { + mlx4_err(dev, "eth-ib configuration is not supported.\n"); + return -EINVAL; + } + + for (i = 0; i < dev->caps.num_ports; i++) { + if (!(port_type[i] & dev->caps.supported_type[i+1])) { + mlx4_err(dev, "Requested port type for port %d is not " + "supported on this HCA\n", i + 1); + return -EINVAL; + } + } + return 0; +} + +static void mlx4_set_port_mask(struct mlx4_dev *dev) +{ + int i; + + dev->caps.port_mask = 0; + for (i = 1; i <= dev->caps.num_ports; ++i) + if (dev->caps.port_type[i] == MLX4_PORT_TYPE_IB) + dev->caps.port_mask |= 1 << (i - 1); +} static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) { int err; @@ -120,10 +171,13 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) dev->caps.num_ports = dev_cap->num_ports; for (i = 1; i <= dev->caps.num_ports; ++i) { dev->caps.vl_cap[i] = dev_cap->max_vl[i]; - dev->caps.mtu_cap[i] = dev_cap->max_mtu[i]; + dev->caps.ib_mtu_cap[i] = dev_cap->ib_mtu[i]; dev->caps.gid_table_len[i] = dev_cap->max_gids[i]; dev->caps.pkey_table_len[i] = dev_cap->max_pkeys[i]; dev->caps.port_width_cap[i] = dev_cap->max_port_width[i]; + dev->caps.eth_mtu_cap[i] = dev_cap->eth_mtu[i]; + dev->caps.def_mac[i] = dev_cap->def_mac[i]; + dev->caps.supported_type[i] = dev_cap->supported_port_types[i]; } dev->caps.num_uars = dev_cap->uar_size / PAGE_SIZE; @@ -134,7 +188,6 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) dev->caps.max_rq_sg = dev_cap->max_rq_sg; dev->caps.max_wqes = dev_cap->max_qp_sz; dev->caps.max_qp_init_rdma = dev_cap->max_requester_per_qp; - dev->caps.reserved_qps = dev_cap->reserved_qps; dev->caps.max_srq_wqes = dev_cap->max_srq_sz; dev->caps.max_srq_sge = dev_cap->max_rq_sg - 1; dev->caps.reserved_srqs = dev_cap->reserved_srqs; @@ -163,9 +216,138 @@ static int mlx4_dev_cap(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap) dev->caps.stat_rate_support = dev_cap->stat_rate_support; dev->caps.max_gso_sz = dev_cap->max_gso_sz; + dev->caps.log_num_macs = log_num_mac; + dev->caps.log_num_vlans = log_num_vlan; + dev->caps.log_num_prios = use_prio ? 3 : 0; + + for (i = 1; i <= dev->caps.num_ports; ++i) { + if (dev->caps.supported_type[i] != MLX4_PORT_TYPE_ETH) + dev->caps.port_type[i] = MLX4_PORT_TYPE_IB; + else + dev->caps.port_type[i] = MLX4_PORT_TYPE_ETH; + + if (dev->caps.log_num_macs > dev_cap->log_max_macs[i]) { + dev->caps.log_num_macs = dev_cap->log_max_macs[i]; + mlx4_warn(dev, "Requested number of MACs is too much " + "for port %d, reducing to %d.\n", + i, 1 << dev->caps.log_num_macs); + } + if (dev->caps.log_num_vlans > dev_cap->log_max_vlans[i]) { + dev->caps.log_num_vlans = dev_cap->log_max_vlans[i]; + mlx4_warn(dev, "Requested number of VLANs is too much " + "for port %d, reducing to %d.\n", + i, 1 << dev->caps.log_num_vlans); + } + } + + mlx4_set_port_mask(dev); + + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW] = dev_cap->reserved_qps; + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_ETH_ADDR] = + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_ADDR] = + (1 << dev->caps.log_num_macs) * + (1 << dev->caps.log_num_vlans) * + (1 << dev->caps.log_num_prios) * + dev->caps.num_ports; + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_EXCH] = MLX4_NUM_FEXCH; + + dev->caps.reserved_qps = dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW] + + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_ETH_ADDR] + + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_ADDR] + + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FC_EXCH]; + return 0; } +/* + * Change the port configuration of the device. + * Every user of this function must hold the port mutex. + */ +static int mlx4_change_port_types(struct mlx4_dev *dev, + enum mlx4_port_type *port_types) +{ + int err = 0; + int change = 0; + int port; + + for (port = 0; port < dev->caps.num_ports; port++) { + if (port_types[port] != dev->caps.port_type[port + 1]) { + change = 1; + dev->caps.port_type[port + 1] = port_types[port]; + } + } + if (change) { + mlx4_unregister_device(dev); + for (port = 1; port <= dev->caps.num_ports; port++) { + mlx4_CLOSE_PORT(dev, port); + err = mlx4_SET_PORT(dev, port); + if (err) { + mlx4_err(dev, "Failed to set port %d, " + "aborting\n", port); + goto out; + } + } + mlx4_set_port_mask(dev); + err = mlx4_register_device(dev); + } + +out: + return err; +} + +static ssize_t show_port_type(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info, + port_attr); + struct mlx4_dev *mdev = info->dev; + + return sprintf(buf, "%s\n", + mdev->caps.port_type[info->port] == MLX4_PORT_TYPE_IB ? + "ib" : "eth"); +} + +static ssize_t set_port_type(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct mlx4_port_info *info = container_of(attr, struct mlx4_port_info, + port_attr); + struct mlx4_dev *mdev = info->dev; + struct mlx4_priv *priv = mlx4_priv(mdev); + enum mlx4_port_type types[MLX4_MAX_PORTS]; + int i; + int err = 0; + + if (!strcmp(buf, "ib\n")) + info->tmp_type = MLX4_PORT_TYPE_IB; + else if (!strcmp(buf, "eth\n")) + info->tmp_type = MLX4_PORT_TYPE_ETH; + else { + mlx4_err(mdev, "%s is not supported port type\n", buf); + return -EINVAL; + } + + mutex_lock(&priv->port_mutex); + for (i = 0; i < mdev->caps.num_ports; i++) + types[i] = priv->port[i+1].tmp_type ? priv->port[i+1].tmp_type : + mdev->caps.port_type[i+1]; + + err = mlx4_check_port_params(mdev, types); + if (err) + goto out; + + for (i = 1; i <= mdev->caps.num_ports; i++) + priv->port[i].tmp_type = 0; + + err = mlx4_change_port_types(mdev, types); + +out: + mutex_unlock(&priv->port_mutex); + return err ? err : count; +} + static int mlx4_load_fw(struct mlx4_dev *dev) { struct mlx4_priv *priv = mlx4_priv(dev); @@ -211,7 +393,8 @@ static int mlx4_init_cmpt_table(struct mlx4_dev *dev, u64 cmpt_base, ((u64) (MLX4_CMPT_TYPE_QP * cmpt_entry_sz) << MLX4_CMPT_SHIFT), cmpt_entry_sz, dev->caps.num_qps, - dev->caps.reserved_qps, 0, 0); + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW], + 0, 0); if (err) goto err; @@ -336,7 +519,8 @@ static int mlx4_init_icm(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap, init_hca->qpc_base, dev_cap->qpc_entry_sz, dev->caps.num_qps, - dev->caps.reserved_qps, 0, 0); + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW], + 0, 0); if (err) { mlx4_err(dev, "Failed to map QP context memory, aborting.\n"); goto err_unmap_dmpt; @@ -346,7 +530,8 @@ static int mlx4_init_icm(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap, init_hca->auxc_base, dev_cap->aux_entry_sz, dev->caps.num_qps, - dev->caps.reserved_qps, 0, 0); + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW], + 0, 0); if (err) { mlx4_err(dev, "Failed to map AUXC context memory, aborting.\n"); goto err_unmap_qp; @@ -356,7 +541,8 @@ static int mlx4_init_icm(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap, init_hca->altc_base, dev_cap->altc_entry_sz, dev->caps.num_qps, - dev->caps.reserved_qps, 0, 0); + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW], + 0, 0); if (err) { mlx4_err(dev, "Failed to map ALTC context memory, aborting.\n"); goto err_unmap_auxc; @@ -366,7 +552,8 @@ static int mlx4_init_icm(struct mlx4_dev *dev, struct mlx4_dev_cap *dev_cap, init_hca->rdmarc_base, dev_cap->rdmarc_entry_sz << priv->qp_table.rdmarc_shift, dev->caps.num_qps, - dev->caps.reserved_qps, 0, 0); + dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW], + 0, 0); if (err) { mlx4_err(dev, "Failed to map RDMARC context memory, aborting\n"); goto err_unmap_altc; @@ -565,6 +752,7 @@ static int mlx4_setup_hca(struct mlx4_dev *dev) { struct mlx4_priv *priv = mlx4_priv(dev); int err; + int port; err = mlx4_init_uar_table(dev); if (err) { @@ -663,8 +851,20 @@ static int mlx4_setup_hca(struct mlx4_dev *dev) goto err_qp_table_free; } + for (port = 1; port <= dev->caps.num_ports; port++) { + err = mlx4_SET_PORT(dev, port); + if (err) { + mlx4_err(dev, "Failed to set port %d, aborting\n", + port); + goto err_mcg_table_free; + } + } + return 0; +err_mcg_table_free: + mlx4_cleanup_mcg_table(dev); + err_qp_table_free: mlx4_cleanup_qp_table(dev); @@ -728,11 +928,45 @@ no_msi: priv->eq_table.eq[i].irq = dev->pdev->irq; } +static int mlx4_init_port_info(struct mlx4_dev *dev, int port) +{ + struct mlx4_port_info *info = &mlx4_priv(dev)->port[port]; + int err = 0; + + info->dev = dev; + info->port = port; + mlx4_init_mac_table(dev, &info->mac_table); + mlx4_init_vlan_table(dev, &info->vlan_table); + + sprintf(info->dev_name, "mlx4_port%d", port); + info->port_attr.attr.name = info->dev_name; + info->port_attr.attr.mode = S_IRUGO | S_IWUSR; + info->port_attr.show = show_port_type; + info->port_attr.store = set_port_type; + + err = device_create_file(&dev->pdev->dev, &info->port_attr); + if (err) { + mlx4_err(dev, "Failed to create file for port %d\n", port); + info->port = -1; + } + + return err; +} + +static void mlx4_cleanup_port_info(struct mlx4_port_info *info) +{ + if (info->port < 0) + return; + + device_remove_file(&info->dev->pdev->dev, &info->port_attr); +} + static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id) { struct mlx4_priv *priv; struct mlx4_dev *dev; int err; + int port; printk(KERN_INFO PFX "Initializing %s\n", pci_name(pdev)); @@ -807,6 +1041,8 @@ static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id) INIT_LIST_HEAD(&priv->ctx_list); spin_lock_init(&priv->ctx_lock); + mutex_init(&priv->port_mutex); + INIT_LIST_HEAD(&priv->pgdir_list); mutex_init(&priv->pgdir_mutex); @@ -842,15 +1078,24 @@ static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id) if (err) goto err_close; + for (port = 1; port <= dev->caps.num_ports; port++) { + err = mlx4_init_port_info(dev, port); + if (err) + goto err_port; + } + err = mlx4_register_device(dev); if (err) - goto err_cleanup; + goto err_port; pci_set_drvdata(pdev, dev); return 0; -err_cleanup: +err_port: + for (port = 1; port <= dev->caps.num_ports; port++) + mlx4_cleanup_port_info(&priv->port[port]); + mlx4_cleanup_mcg_table(dev); mlx4_cleanup_qp_table(dev); mlx4_cleanup_srq_table(dev); @@ -907,8 +1152,10 @@ static void mlx4_remove_one(struct pci_dev *pdev) if (dev) { mlx4_unregister_device(dev); - for (p = 1; p <= dev->caps.num_ports; ++p) + for (p = 1; p <= dev->caps.num_ports; p++) { + mlx4_cleanup_port_info(&priv->port[p]); mlx4_CLOSE_PORT(dev, p); + } mlx4_cleanup_mcg_table(dev); mlx4_cleanup_qp_table(dev); @@ -948,6 +1195,8 @@ static struct pci_device_id mlx4_pci_table[] = { { PCI_VDEVICE(MELLANOX, 0x6354) }, /* MT25408 "Hermon" QDR */ { PCI_VDEVICE(MELLANOX, 0x6732) }, /* MT25408 "Hermon" DDR PCIe gen2 */ { PCI_VDEVICE(MELLANOX, 0x673c) }, /* MT25408 "Hermon" QDR PCIe gen2 */ + { PCI_VDEVICE(MELLANOX, 0x6368) }, /* MT25408 "Hermon" EN 10GigE */ + { PCI_VDEVICE(MELLANOX, 0x6750) }, /* MT25408 "Hermon" EN 10GigE PCIe gen2 */ { 0, } }; @@ -960,10 +1209,28 @@ static struct pci_driver mlx4_driver = { .remove = __devexit_p(mlx4_remove_one) }; +static int __init mlx4_verify_params(void) +{ + if ((log_num_mac < 0) || (log_num_mac > 7)) { + printk(KERN_WARNING "mlx4_core: bad num_mac: %d\n", log_num_mac); + return -1; + } + + if ((log_num_vlan < 0) || (log_num_vlan > 7)) { + printk(KERN_WARNING "mlx4_core: bad num_vlan: %d\n", log_num_vlan); + return -1; + } + + return 0; +} + static int __init mlx4_init(void) { int ret; + if (mlx4_verify_params()) + return -EINVAL; + ret = mlx4_catas_init(); if (ret) return ret; diff --git a/drivers/net/mlx4/mcg.c b/drivers/net/mlx4/mcg.c index c83f88ce0736..592c01ae2c5d 100644 --- a/drivers/net/mlx4/mcg.c +++ b/drivers/net/mlx4/mcg.c @@ -368,8 +368,8 @@ int mlx4_init_mcg_table(struct mlx4_dev *dev) struct mlx4_priv *priv = mlx4_priv(dev); int err; - err = mlx4_bitmap_init(&priv->mcg_table.bitmap, - dev->caps.num_amgms, dev->caps.num_amgms - 1, 0); + err = mlx4_bitmap_init(&priv->mcg_table.bitmap, dev->caps.num_amgms, + dev->caps.num_amgms - 1, 0, 0); if (err) return err; diff --git a/drivers/net/mlx4/mlx4.h b/drivers/net/mlx4/mlx4.h index 5337e3ac3e78..fa431fad0eec 100644 --- a/drivers/net/mlx4/mlx4.h +++ b/drivers/net/mlx4/mlx4.h @@ -111,6 +111,7 @@ struct mlx4_bitmap { u32 last; u32 top; u32 max; + u32 reserved_top; u32 mask; spinlock_t lock; unsigned long *table; @@ -251,6 +252,38 @@ struct mlx4_catas_err { struct list_head list; }; +#define MLX4_MAX_MAC_NUM 128 +#define MLX4_MAC_TABLE_SIZE (MLX4_MAX_MAC_NUM << 3) + +struct mlx4_mac_table { + __be64 entries[MLX4_MAX_MAC_NUM]; + int refs[MLX4_MAX_MAC_NUM]; + struct mutex mutex; + int total; + int max; +}; + +#define MLX4_MAX_VLAN_NUM 128 +#define MLX4_VLAN_TABLE_SIZE (MLX4_MAX_VLAN_NUM << 2) + +struct mlx4_vlan_table { + __be32 entries[MLX4_MAX_VLAN_NUM]; + int refs[MLX4_MAX_VLAN_NUM]; + struct mutex mutex; + int total; + int max; +}; + +struct mlx4_port_info { + struct mlx4_dev *dev; + int port; + char dev_name[16]; + struct device_attribute port_attr; + enum mlx4_port_type tmp_type; + struct mlx4_mac_table mac_table; + struct mlx4_vlan_table vlan_table; +}; + struct mlx4_priv { struct mlx4_dev dev; @@ -279,6 +312,8 @@ struct mlx4_priv { struct mlx4_uar driver_uar; void __iomem *kar; + struct mlx4_port_info port[MLX4_MAX_PORTS + 1]; + struct mutex port_mutex; }; static inline struct mlx4_priv *mlx4_priv(struct mlx4_dev *dev) @@ -288,7 +323,10 @@ static inline struct mlx4_priv *mlx4_priv(struct mlx4_dev *dev) u32 mlx4_bitmap_alloc(struct mlx4_bitmap *bitmap); void mlx4_bitmap_free(struct mlx4_bitmap *bitmap, u32 obj); -int mlx4_bitmap_init(struct mlx4_bitmap *bitmap, u32 num, u32 mask, u32 reserved); +u32 mlx4_bitmap_alloc_range(struct mlx4_bitmap *bitmap, int cnt, int align); +void mlx4_bitmap_free_range(struct mlx4_bitmap *bitmap, u32 obj, int cnt); +int mlx4_bitmap_init(struct mlx4_bitmap *bitmap, u32 num, u32 mask, + u32 reserved_bot, u32 resetrved_top); void mlx4_bitmap_cleanup(struct mlx4_bitmap *bitmap); int mlx4_reset(struct mlx4_dev *dev); @@ -346,4 +384,9 @@ void mlx4_srq_event(struct mlx4_dev *dev, u32 srqn, int event_type); void mlx4_handle_catas_err(struct mlx4_dev *dev); +void mlx4_init_mac_table(struct mlx4_dev *dev, struct mlx4_mac_table *table); +void mlx4_init_vlan_table(struct mlx4_dev *dev, struct mlx4_vlan_table *table); + +int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port); + #endif /* MLX4_H */ diff --git a/drivers/net/mlx4/mlx4_en.h b/drivers/net/mlx4/mlx4_en.h new file mode 100644 index 000000000000..11fb17c6e97b --- /dev/null +++ b/drivers/net/mlx4/mlx4_en.h @@ -0,0 +1,561 @@ +/* + * Copyright (c) 2007 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + * + */ + +#ifndef _MLX4_EN_H_ +#define _MLX4_EN_H_ + +#include <linux/compiler.h> +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/netdevice.h> +#include <linux/inet_lro.h> + +#include <linux/mlx4/device.h> +#include <linux/mlx4/qp.h> +#include <linux/mlx4/cq.h> +#include <linux/mlx4/srq.h> +#include <linux/mlx4/doorbell.h> + +#include "en_port.h" + +#define DRV_NAME "mlx4_en" +#define DRV_VERSION "1.4.0" +#define DRV_RELDATE "Sep 2008" + + +#define MLX4_EN_MSG_LEVEL (NETIF_MSG_LINK | NETIF_MSG_IFDOWN) + +#define mlx4_dbg(mlevel, priv, format, arg...) \ + if (NETIF_MSG_##mlevel & priv->msg_enable) \ + printk(KERN_DEBUG "%s %s: " format , DRV_NAME ,\ + (&priv->mdev->pdev->dev)->bus_id , ## arg) + +#define mlx4_err(mdev, format, arg...) \ + printk(KERN_ERR "%s %s: " format , DRV_NAME ,\ + (&mdev->pdev->dev)->bus_id , ## arg) +#define mlx4_info(mdev, format, arg...) \ + printk(KERN_INFO "%s %s: " format , DRV_NAME ,\ + (&mdev->pdev->dev)->bus_id , ## arg) +#define mlx4_warn(mdev, format, arg...) \ + printk(KERN_WARNING "%s %s: " format , DRV_NAME ,\ + (&mdev->pdev->dev)->bus_id , ## arg) + +/* + * Device constants + */ + + +#define MLX4_EN_PAGE_SHIFT 12 +#define MLX4_EN_PAGE_SIZE (1 << MLX4_EN_PAGE_SHIFT) +#define MAX_TX_RINGS 16 +#define MAX_RX_RINGS 16 +#define MAX_RSS_MAP_SIZE 64 +#define RSS_FACTOR 2 +#define TXBB_SIZE 64 +#define HEADROOM (2048 / TXBB_SIZE + 1) +#define MAX_LSO_HDR_SIZE 92 +#define STAMP_STRIDE 64 +#define STAMP_DWORDS (STAMP_STRIDE / 4) +#define STAMP_SHIFT 31 +#define STAMP_VAL 0x7fffffff +#define STATS_DELAY (HZ / 4) + +/* Typical TSO descriptor with 16 gather entries is 352 bytes... */ +#define MAX_DESC_SIZE 512 +#define MAX_DESC_TXBBS (MAX_DESC_SIZE / TXBB_SIZE) + +/* + * OS related constants and tunables + */ + +#define MLX4_EN_WATCHDOG_TIMEOUT (15 * HZ) + +#define MLX4_EN_ALLOC_ORDER 2 +#define MLX4_EN_ALLOC_SIZE (PAGE_SIZE << MLX4_EN_ALLOC_ORDER) + +#define MLX4_EN_MAX_LRO_DESCRIPTORS 32 + +/* Receive fragment sizes; we use at most 4 fragments (for 9600 byte MTU + * and 4K allocations) */ +enum { + FRAG_SZ0 = 512 - NET_IP_ALIGN, + FRAG_SZ1 = 1024, + FRAG_SZ2 = 4096, + FRAG_SZ3 = MLX4_EN_ALLOC_SIZE +}; +#define MLX4_EN_MAX_RX_FRAGS 4 + +/* Minimum ring size for our page-allocation sceme to work */ +#define MLX4_EN_MIN_RX_SIZE (MLX4_EN_ALLOC_SIZE / SMP_CACHE_BYTES) +#define MLX4_EN_MIN_TX_SIZE (4096 / TXBB_SIZE) + +#define MLX4_EN_TX_RING_NUM 9 +#define MLX4_EN_DEF_TX_RING_SIZE 1024 +#define MLX4_EN_DEF_RX_RING_SIZE 1024 + +/* Target number of bytes to coalesce with interrupt moderation */ +#define MLX4_EN_RX_COAL_TARGET 0x20000 +#define MLX4_EN_RX_COAL_TIME 0x10 + +#define MLX4_EN_TX_COAL_PKTS 5 +#define MLX4_EN_TX_COAL_TIME 0x80 + +#define MLX4_EN_RX_RATE_LOW 400000 +#define MLX4_EN_RX_COAL_TIME_LOW 0 +#define MLX4_EN_RX_RATE_HIGH 450000 +#define MLX4_EN_RX_COAL_TIME_HIGH 128 +#define MLX4_EN_RX_SIZE_THRESH 1024 +#define MLX4_EN_RX_RATE_THRESH (1000000 / MLX4_EN_RX_COAL_TIME_HIGH) +#define MLX4_EN_SAMPLE_INTERVAL 0 + +#define MLX4_EN_AUTO_CONF 0xffff + +#define MLX4_EN_DEF_RX_PAUSE 1 +#define MLX4_EN_DEF_TX_PAUSE 1 + +/* Interval between sucessive polls in the Tx routine when polling is used + instead of interrupts (in per-core Tx rings) - should be power of 2 */ +#define MLX4_EN_TX_POLL_MODER 16 +#define MLX4_EN_TX_POLL_TIMEOUT (HZ / 4) + +#define ETH_LLC_SNAP_SIZE 8 + +#define SMALL_PACKET_SIZE (256 - NET_IP_ALIGN) +#define HEADER_COPY_SIZE (128 - NET_IP_ALIGN) + +#define MLX4_EN_MIN_MTU 46 +#define ETH_BCAST 0xffffffffffffULL + +#ifdef MLX4_EN_PERF_STAT +/* Number of samples to 'average' */ +#define AVG_SIZE 128 +#define AVG_FACTOR 1024 +#define NUM_PERF_STATS NUM_PERF_COUNTERS + +#define INC_PERF_COUNTER(cnt) (++(cnt)) +#define ADD_PERF_COUNTER(cnt, add) ((cnt) += (add)) +#define AVG_PERF_COUNTER(cnt, sample) \ + ((cnt) = ((cnt) * (AVG_SIZE - 1) + (sample) * AVG_FACTOR) / AVG_SIZE) +#define GET_PERF_COUNTER(cnt) (cnt) +#define GET_AVG_PERF_COUNTER(cnt) ((cnt) / AVG_FACTOR) + +#else + +#define NUM_PERF_STATS 0 +#define INC_PERF_COUNTER(cnt) do {} while (0) +#define ADD_PERF_COUNTER(cnt, add) do {} while (0) +#define AVG_PERF_COUNTER(cnt, sample) do {} while (0) +#define GET_PERF_COUNTER(cnt) (0) +#define GET_AVG_PERF_COUNTER(cnt) (0) +#endif /* MLX4_EN_PERF_STAT */ + +/* + * Configurables + */ + +enum cq_type { + RX = 0, + TX = 1, +}; + + +/* + * Useful macros + */ +#define ROUNDUP_LOG2(x) ilog2(roundup_pow_of_two(x)) +#define XNOR(x, y) (!(x) == !(y)) +#define ILLEGAL_MAC(addr) (addr == 0xffffffffffffULL || addr == 0x0) + + +struct mlx4_en_tx_info { + struct sk_buff *skb; + u32 nr_txbb; + u8 linear; + u8 data_offset; +}; + + +#define MLX4_EN_BIT_DESC_OWN 0x80000000 +#define CTRL_SIZE sizeof(struct mlx4_wqe_ctrl_seg) +#define MLX4_EN_MEMTYPE_PAD 0x100 +#define DS_SIZE sizeof(struct mlx4_wqe_data_seg) + + +struct mlx4_en_tx_desc { + struct mlx4_wqe_ctrl_seg ctrl; + union { + struct mlx4_wqe_data_seg data; /* at least one data segment */ + struct mlx4_wqe_lso_seg lso; + struct mlx4_wqe_inline_seg inl; + }; +}; + +#define MLX4_EN_USE_SRQ 0x01000000 + +struct mlx4_en_rx_alloc { + struct page *page; + u16 offset; +}; + +struct mlx4_en_tx_ring { + struct mlx4_hwq_resources wqres; + u32 size ; /* number of TXBBs */ + u32 size_mask; + u16 stride; + u16 cqn; /* index of port CQ associated with this ring */ + u32 prod; + u32 cons; + u32 buf_size; + u32 doorbell_qpn; + void *buf; + u16 poll_cnt; + int blocked; + struct mlx4_en_tx_info *tx_info; + u8 *bounce_buf; + u32 last_nr_txbb; + struct mlx4_qp qp; + struct mlx4_qp_context context; + int qpn; + enum mlx4_qp_state qp_state; + struct mlx4_srq dummy; + unsigned long bytes; + unsigned long packets; + spinlock_t comp_lock; +}; + +struct mlx4_en_rx_desc { + struct mlx4_wqe_srq_next_seg next; + /* actual number of entries depends on rx ring stride */ + struct mlx4_wqe_data_seg data[0]; +}; + +struct mlx4_en_rx_ring { + struct mlx4_srq srq; + struct mlx4_hwq_resources wqres; + struct mlx4_en_rx_alloc page_alloc[MLX4_EN_MAX_RX_FRAGS]; + struct net_lro_mgr lro; + u32 size ; /* number of Rx descs*/ + u32 actual_size; + u32 size_mask; + u16 stride; + u16 log_stride; + u16 cqn; /* index of port CQ associated with this ring */ + u32 prod; + u32 cons; + u32 buf_size; + int need_refill; + int full; + void *buf; + void *rx_info; + unsigned long bytes; + unsigned long packets; +}; + + +static inline int mlx4_en_can_lro(__be16 status) +{ + return (status & cpu_to_be16(MLX4_CQE_STATUS_IPV4 | + MLX4_CQE_STATUS_IPV4F | + MLX4_CQE_STATUS_IPV6 | + MLX4_CQE_STATUS_IPV4OPT | + MLX4_CQE_STATUS_TCP | + MLX4_CQE_STATUS_UDP | + MLX4_CQE_STATUS_IPOK)) == + cpu_to_be16(MLX4_CQE_STATUS_IPV4 | + MLX4_CQE_STATUS_IPOK | + MLX4_CQE_STATUS_TCP); +} + +struct mlx4_en_cq { + struct mlx4_cq mcq; + struct mlx4_hwq_resources wqres; + int ring; + spinlock_t lock; + struct net_device *dev; + struct napi_struct napi; + /* Per-core Tx cq processing support */ + struct timer_list timer; + int size; + int buf_size; + unsigned vector; + enum cq_type is_tx; + u16 moder_time; + u16 moder_cnt; + int armed; + struct mlx4_cqe *buf; +#define MLX4_EN_OPCODE_ERROR 0x1e +}; + +struct mlx4_en_port_profile { + u32 flags; + u32 tx_ring_num; + u32 rx_ring_num; + u32 tx_ring_size; + u32 rx_ring_size; +}; + +struct mlx4_en_profile { + int rss_xor; + int num_lro; + u8 rss_mask; + u32 active_ports; + u32 small_pkt_int; + int rx_moder_cnt; + int rx_moder_time; + int auto_moder; + u8 rx_pause; + u8 rx_ppp; + u8 tx_pause; + u8 tx_ppp; + u8 no_reset; + struct mlx4_en_port_profile prof[MLX4_MAX_PORTS + 1]; +}; + +struct mlx4_en_dev { + struct mlx4_dev *dev; + struct pci_dev *pdev; + struct mutex state_lock; + struct net_device *pndev[MLX4_MAX_PORTS + 1]; + u32 port_cnt; + bool device_up; + struct mlx4_en_profile profile; + u32 LSO_support; + struct workqueue_struct *workqueue; + struct device *dma_device; + void __iomem *uar_map; + struct mlx4_uar priv_uar; + struct mlx4_mr mr; + u32 priv_pdn; + spinlock_t uar_lock; +}; + + +struct mlx4_en_rss_map { + int size; + int base_qpn; + u16 map[MAX_RSS_MAP_SIZE]; + struct mlx4_qp qps[MAX_RSS_MAP_SIZE]; + enum mlx4_qp_state state[MAX_RSS_MAP_SIZE]; + struct mlx4_qp indir_qp; + enum mlx4_qp_state indir_state; +}; + +struct mlx4_en_rss_context { + __be32 base_qpn; + __be32 default_qpn; + u16 reserved; + u8 hash_fn; + u8 flags; + __be32 rss_key[10]; +}; + +struct mlx4_en_pkt_stats { + unsigned long broadcast; + unsigned long rx_prio[8]; + unsigned long tx_prio[8]; +#define NUM_PKT_STATS 17 +}; + +struct mlx4_en_port_stats { + unsigned long lro_aggregated; + unsigned long lro_flushed; + unsigned long lro_no_desc; + unsigned long tso_packets; + unsigned long queue_stopped; + unsigned long wake_queue; + unsigned long tx_timeout; + unsigned long rx_alloc_failed; + unsigned long rx_chksum_good; + unsigned long rx_chksum_none; + unsigned long tx_chksum_offload; +#define NUM_PORT_STATS 11 +}; + +struct mlx4_en_perf_stats { + u32 tx_poll; + u64 tx_pktsz_avg; + u32 inflight_avg; + u16 tx_coal_avg; + u16 rx_coal_avg; + u32 napi_quota; +#define NUM_PERF_COUNTERS 6 +}; + +struct mlx4_en_frag_info { + u16 frag_size; + u16 frag_prefix_size; + u16 frag_stride; + u16 frag_align; + u16 last_offset; + +}; + +struct mlx4_en_priv { + struct mlx4_en_dev *mdev; + struct mlx4_en_port_profile *prof; + struct net_device *dev; + struct vlan_group *vlgrp; + struct net_device_stats stats; + struct net_device_stats ret_stats; + spinlock_t stats_lock; + + unsigned long last_moder_packets; + unsigned long last_moder_tx_packets; + unsigned long last_moder_bytes; + unsigned long last_moder_jiffies; + int last_moder_time; + u16 rx_usecs; + u16 rx_frames; + u16 tx_usecs; + u16 tx_frames; + u32 pkt_rate_low; + u16 rx_usecs_low; + u32 pkt_rate_high; + u16 rx_usecs_high; + u16 sample_interval; + u16 adaptive_rx_coal; + u32 msg_enable; + + struct mlx4_hwq_resources res; + int link_state; + int last_link_state; + bool port_up; + int port; + int registered; + int allocated; + int stride; + int rx_csum; + u64 mac; + int mac_index; + unsigned max_mtu; + int base_qpn; + + struct mlx4_en_rss_map rss_map; + u16 tx_prio_map[8]; + u32 flags; +#define MLX4_EN_FLAG_PROMISC 0x1 + u32 tx_ring_num; + u32 rx_ring_num; + u32 rx_skb_size; + struct mlx4_en_frag_info frag_info[MLX4_EN_MAX_RX_FRAGS]; + u16 num_frags; + u16 log_rx_info; + + struct mlx4_en_tx_ring tx_ring[MAX_TX_RINGS]; + struct mlx4_en_rx_ring rx_ring[MAX_RX_RINGS]; + struct mlx4_en_cq tx_cq[MAX_TX_RINGS]; + struct mlx4_en_cq rx_cq[MAX_RX_RINGS]; + struct work_struct mcast_task; + struct work_struct mac_task; + struct delayed_work refill_task; + struct work_struct watchdog_task; + struct work_struct linkstate_task; + struct delayed_work stats_task; + struct mlx4_en_perf_stats pstats; + struct mlx4_en_pkt_stats pkstats; + struct mlx4_en_port_stats port_stats; + struct dev_mc_list *mc_list; + struct mlx4_en_stat_out_mbox hw_stats; +}; + + +void mlx4_en_destroy_netdev(struct net_device *dev); +int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port, + struct mlx4_en_port_profile *prof); + +int mlx4_en_get_profile(struct mlx4_en_dev *mdev); + +int mlx4_en_create_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq, + int entries, int ring, enum cq_type mode); +void mlx4_en_destroy_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq); +int mlx4_en_activate_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq); +void mlx4_en_deactivate_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq); +int mlx4_en_set_cq_moder(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq); +int mlx4_en_arm_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq); + +void mlx4_en_poll_tx_cq(unsigned long data); +void mlx4_en_tx_irq(struct mlx4_cq *mcq); +int mlx4_en_xmit(struct sk_buff *skb, struct net_device *dev); + +int mlx4_en_create_tx_ring(struct mlx4_en_priv *priv, struct mlx4_en_tx_ring *ring, + u32 size, u16 stride); +void mlx4_en_destroy_tx_ring(struct mlx4_en_priv *priv, struct mlx4_en_tx_ring *ring); +int mlx4_en_activate_tx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_tx_ring *ring, + int cq, int srqn); +void mlx4_en_deactivate_tx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_tx_ring *ring); + +int mlx4_en_create_rx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring, + u32 size, u16 stride); +void mlx4_en_destroy_rx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring); +int mlx4_en_activate_rx_rings(struct mlx4_en_priv *priv); +void mlx4_en_deactivate_rx_ring(struct mlx4_en_priv *priv, + struct mlx4_en_rx_ring *ring); +int mlx4_en_process_rx_cq(struct net_device *dev, + struct mlx4_en_cq *cq, + int budget); +int mlx4_en_poll_rx_cq(struct napi_struct *napi, int budget); +void mlx4_en_fill_qp_context(struct mlx4_en_priv *priv, int size, int stride, + int is_tx, int rss, int qpn, int cqn, int srqn, + struct mlx4_qp_context *context); +int mlx4_en_map_buffer(struct mlx4_buf *buf); +void mlx4_en_unmap_buffer(struct mlx4_buf *buf); + +void mlx4_en_calc_rx_buf(struct net_device *dev); +void mlx4_en_set_default_rss_map(struct mlx4_en_priv *priv, + struct mlx4_en_rss_map *rss_map, + int num_entries, int num_rings); +void mlx4_en_set_prio_map(struct mlx4_en_priv *priv, u16 *prio_map, u32 ring_num); +int mlx4_en_config_rss_steer(struct mlx4_en_priv *priv); +void mlx4_en_release_rss_steer(struct mlx4_en_priv *priv); +int mlx4_en_free_tx_buf(struct net_device *dev, struct mlx4_en_tx_ring *ring); +void mlx4_en_rx_refill(struct work_struct *work); +void mlx4_en_rx_irq(struct mlx4_cq *mcq); + +int mlx4_SET_MCAST_FLTR(struct mlx4_dev *dev, u8 port, u64 mac, u64 clear, u8 mode); +int mlx4_SET_VLAN_FLTR(struct mlx4_dev *dev, u8 port, struct vlan_group *grp); +int mlx4_SET_PORT_general(struct mlx4_dev *dev, u8 port, int mtu, + u8 pptx, u8 pfctx, u8 pprx, u8 pfcrx); +int mlx4_SET_PORT_qpn_calc(struct mlx4_dev *dev, u8 port, u32 base_qpn, + u8 promisc); + +int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset); + +/* + * Globals + */ +extern const struct ethtool_ops mlx4_en_ethtool_ops; +#endif diff --git a/drivers/net/mlx4/mr.c b/drivers/net/mlx4/mr.c index d1dd5b48dbd1..0caf74cae8bc 100644 --- a/drivers/net/mlx4/mr.c +++ b/drivers/net/mlx4/mr.c @@ -461,7 +461,7 @@ int mlx4_init_mr_table(struct mlx4_dev *dev) int err; err = mlx4_bitmap_init(&mr_table->mpt_bitmap, dev->caps.num_mpts, - ~0, dev->caps.reserved_mrws); + ~0, dev->caps.reserved_mrws, 0); if (err) return err; diff --git a/drivers/net/mlx4/pd.c b/drivers/net/mlx4/pd.c index aa616892d09c..26d1a7a9e375 100644 --- a/drivers/net/mlx4/pd.c +++ b/drivers/net/mlx4/pd.c @@ -62,7 +62,7 @@ int mlx4_init_pd_table(struct mlx4_dev *dev) struct mlx4_priv *priv = mlx4_priv(dev); return mlx4_bitmap_init(&priv->pd_bitmap, dev->caps.num_pds, - (1 << 24) - 1, dev->caps.reserved_pds); + (1 << 24) - 1, dev->caps.reserved_pds, 0); } void mlx4_cleanup_pd_table(struct mlx4_dev *dev) @@ -100,7 +100,7 @@ int mlx4_init_uar_table(struct mlx4_dev *dev) return mlx4_bitmap_init(&mlx4_priv(dev)->uar_table.bitmap, dev->caps.num_uars, dev->caps.num_uars - 1, - max(128, dev->caps.reserved_uars)); + max(128, dev->caps.reserved_uars), 0); } void mlx4_cleanup_uar_table(struct mlx4_dev *dev) diff --git a/drivers/net/mlx4/port.c b/drivers/net/mlx4/port.c new file mode 100644 index 000000000000..e2fdab42c4ce --- /dev/null +++ b/drivers/net/mlx4/port.c @@ -0,0 +1,282 @@ +/* + * Copyright (c) 2007 Mellanox Technologies. All rights reserved. + * + * This software is available to you under a choice of one of two + * licenses. You may choose to be licensed under the terms of the GNU + * General Public License (GPL) Version 2, available from the file + * COPYING in the main directory of this source tree, or the + * OpenIB.org BSD license below: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * - Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * + * - Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF + * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS + * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN + * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN + * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE + * SOFTWARE. + */ + +#include <linux/errno.h> +#include <linux/if_ether.h> + +#include <linux/mlx4/cmd.h> + +#include "mlx4.h" + +#define MLX4_MAC_VALID (1ull << 63) +#define MLX4_MAC_MASK 0xffffffffffffULL + +#define MLX4_VLAN_VALID (1u << 31) +#define MLX4_VLAN_MASK 0xfff + +void mlx4_init_mac_table(struct mlx4_dev *dev, struct mlx4_mac_table *table) +{ + int i; + + mutex_init(&table->mutex); + for (i = 0; i < MLX4_MAX_MAC_NUM; i++) { + table->entries[i] = 0; + table->refs[i] = 0; + } + table->max = 1 << dev->caps.log_num_macs; + table->total = 0; +} + +void mlx4_init_vlan_table(struct mlx4_dev *dev, struct mlx4_vlan_table *table) +{ + int i; + + mutex_init(&table->mutex); + for (i = 0; i < MLX4_MAX_VLAN_NUM; i++) { + table->entries[i] = 0; + table->refs[i] = 0; + } + table->max = 1 << dev->caps.log_num_vlans; + table->total = 0; +} + +static int mlx4_set_port_mac_table(struct mlx4_dev *dev, u8 port, + __be64 *entries) +{ + struct mlx4_cmd_mailbox *mailbox; + u32 in_mod; + int err; + + mailbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(mailbox)) + return PTR_ERR(mailbox); + + memcpy(mailbox->buf, entries, MLX4_MAC_TABLE_SIZE); + + in_mod = MLX4_SET_PORT_MAC_TABLE << 8 | port; + err = mlx4_cmd(dev, mailbox->dma, in_mod, 1, MLX4_CMD_SET_PORT, + MLX4_CMD_TIME_CLASS_B); + + mlx4_free_cmd_mailbox(dev, mailbox); + return err; +} + +int mlx4_register_mac(struct mlx4_dev *dev, u8 port, u64 mac, int *index) +{ + struct mlx4_mac_table *table = &mlx4_priv(dev)->port[port].mac_table; + int i, err = 0; + int free = -1; + + mlx4_dbg(dev, "Registering MAC: 0x%llx\n", (unsigned long long) mac); + mutex_lock(&table->mutex); + for (i = 0; i < MLX4_MAX_MAC_NUM - 1; i++) { + if (free < 0 && !table->refs[i]) { + free = i; + continue; + } + + if (mac == (MLX4_MAC_MASK & be64_to_cpu(table->entries[i]))) { + /* MAC already registered, increase refernce count */ + *index = i; + ++table->refs[i]; + goto out; + } + } + mlx4_dbg(dev, "Free MAC index is %d\n", free); + + if (table->total == table->max) { + /* No free mac entries */ + err = -ENOSPC; + goto out; + } + + /* Register new MAC */ + table->refs[free] = 1; + table->entries[free] = cpu_to_be64(mac | MLX4_MAC_VALID); + + err = mlx4_set_port_mac_table(dev, port, table->entries); + if (unlikely(err)) { + mlx4_err(dev, "Failed adding MAC: 0x%llx\n", (unsigned long long) mac); + table->refs[free] = 0; + table->entries[free] = 0; + goto out; + } + + *index = free; + ++table->total; +out: + mutex_unlock(&table->mutex); + return err; +} +EXPORT_SYMBOL_GPL(mlx4_register_mac); + +void mlx4_unregister_mac(struct mlx4_dev *dev, u8 port, int index) +{ + struct mlx4_mac_table *table = &mlx4_priv(dev)->port[port].mac_table; + + mutex_lock(&table->mutex); + if (!table->refs[index]) { + mlx4_warn(dev, "No MAC entry for index %d\n", index); + goto out; + } + if (--table->refs[index]) { + mlx4_warn(dev, "Have more references for index %d," + "no need to modify MAC table\n", index); + goto out; + } + table->entries[index] = 0; + mlx4_set_port_mac_table(dev, port, table->entries); + --table->total; +out: + mutex_unlock(&table->mutex); +} +EXPORT_SYMBOL_GPL(mlx4_unregister_mac); + +static int mlx4_set_port_vlan_table(struct mlx4_dev *dev, u8 port, + __be32 *entries) +{ + struct mlx4_cmd_mailbox *mailbox; + u32 in_mod; + int err; + + mailbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(mailbox)) + return PTR_ERR(mailbox); + + memcpy(mailbox->buf, entries, MLX4_VLAN_TABLE_SIZE); + in_mod = MLX4_SET_PORT_VLAN_TABLE << 8 | port; + err = mlx4_cmd(dev, mailbox->dma, in_mod, 1, MLX4_CMD_SET_PORT, + MLX4_CMD_TIME_CLASS_B); + + mlx4_free_cmd_mailbox(dev, mailbox); + + return err; +} + +int mlx4_register_vlan(struct mlx4_dev *dev, u8 port, u16 vlan, int *index) +{ + struct mlx4_vlan_table *table = &mlx4_priv(dev)->port[port].vlan_table; + int i, err = 0; + int free = -1; + + mutex_lock(&table->mutex); + for (i = MLX4_VLAN_REGULAR; i < MLX4_MAX_VLAN_NUM; i++) { + if (free < 0 && (table->refs[i] == 0)) { + free = i; + continue; + } + + if (table->refs[i] && + (vlan == (MLX4_VLAN_MASK & + be32_to_cpu(table->entries[i])))) { + /* Vlan already registered, increase refernce count */ + *index = i; + ++table->refs[i]; + goto out; + } + } + + if (table->total == table->max) { + /* No free vlan entries */ + err = -ENOSPC; + goto out; + } + + /* Register new MAC */ + table->refs[free] = 1; + table->entries[free] = cpu_to_be32(vlan | MLX4_VLAN_VALID); + + err = mlx4_set_port_vlan_table(dev, port, table->entries); + if (unlikely(err)) { + mlx4_warn(dev, "Failed adding vlan: %u\n", vlan); + table->refs[free] = 0; + table->entries[free] = 0; + goto out; + } + + *index = free; + ++table->total; +out: + mutex_unlock(&table->mutex); + return err; +} +EXPORT_SYMBOL_GPL(mlx4_register_vlan); + +void mlx4_unregister_vlan(struct mlx4_dev *dev, u8 port, int index) +{ + struct mlx4_vlan_table *table = &mlx4_priv(dev)->port[port].vlan_table; + + if (index < MLX4_VLAN_REGULAR) { + mlx4_warn(dev, "Trying to free special vlan index %d\n", index); + return; + } + + mutex_lock(&table->mutex); + if (!table->refs[index]) { + mlx4_warn(dev, "No vlan entry for index %d\n", index); + goto out; + } + if (--table->refs[index]) { + mlx4_dbg(dev, "Have more references for index %d," + "no need to modify vlan table\n", index); + goto out; + } + table->entries[index] = 0; + mlx4_set_port_vlan_table(dev, port, table->entries); + --table->total; +out: + mutex_unlock(&table->mutex); +} +EXPORT_SYMBOL_GPL(mlx4_unregister_vlan); + +int mlx4_SET_PORT(struct mlx4_dev *dev, u8 port) +{ + struct mlx4_cmd_mailbox *mailbox; + int err; + u8 is_eth = dev->caps.port_type[port] == MLX4_PORT_TYPE_ETH; + + mailbox = mlx4_alloc_cmd_mailbox(dev); + if (IS_ERR(mailbox)) + return PTR_ERR(mailbox); + + memset(mailbox->buf, 0, 256); + if (is_eth) { + ((u8 *) mailbox->buf)[3] = 6; + ((__be16 *) mailbox->buf)[4] = cpu_to_be16(1 << 15); + ((__be16 *) mailbox->buf)[6] = cpu_to_be16(1 << 15); + } + err = mlx4_cmd(dev, mailbox->dma, port, is_eth, MLX4_CMD_SET_PORT, + MLX4_CMD_TIME_CLASS_B); + + mlx4_free_cmd_mailbox(dev, mailbox); + return err; +} diff --git a/drivers/net/mlx4/qp.c b/drivers/net/mlx4/qp.c index c49a86044bf7..1c565ef8d179 100644 --- a/drivers/net/mlx4/qp.c +++ b/drivers/net/mlx4/qp.c @@ -147,19 +147,42 @@ int mlx4_qp_modify(struct mlx4_dev *dev, struct mlx4_mtt *mtt, } EXPORT_SYMBOL_GPL(mlx4_qp_modify); -int mlx4_qp_alloc(struct mlx4_dev *dev, int sqpn, struct mlx4_qp *qp) +int mlx4_qp_reserve_range(struct mlx4_dev *dev, int cnt, int align, int *base) +{ + struct mlx4_priv *priv = mlx4_priv(dev); + struct mlx4_qp_table *qp_table = &priv->qp_table; + int qpn; + + qpn = mlx4_bitmap_alloc_range(&qp_table->bitmap, cnt, align); + if (qpn == -1) + return -ENOMEM; + + *base = qpn; + return 0; +} +EXPORT_SYMBOL_GPL(mlx4_qp_reserve_range); + +void mlx4_qp_release_range(struct mlx4_dev *dev, int base_qpn, int cnt) +{ + struct mlx4_priv *priv = mlx4_priv(dev); + struct mlx4_qp_table *qp_table = &priv->qp_table; + if (base_qpn < dev->caps.sqp_start + 8) + return; + + mlx4_bitmap_free_range(&qp_table->bitmap, base_qpn, cnt); +} +EXPORT_SYMBOL_GPL(mlx4_qp_release_range); + +int mlx4_qp_alloc(struct mlx4_dev *dev, int qpn, struct mlx4_qp *qp) { struct mlx4_priv *priv = mlx4_priv(dev); struct mlx4_qp_table *qp_table = &priv->qp_table; int err; - if (sqpn) - qp->qpn = sqpn; - else { - qp->qpn = mlx4_bitmap_alloc(&qp_table->bitmap); - if (qp->qpn == -1) - return -ENOMEM; - } + if (!qpn) + return -EINVAL; + + qp->qpn = qpn; err = mlx4_table_get(dev, &qp_table->qp_table, qp->qpn); if (err) @@ -208,9 +231,6 @@ err_put_qp: mlx4_table_put(dev, &qp_table->qp_table, qp->qpn); err_out: - if (!sqpn) - mlx4_bitmap_free(&qp_table->bitmap, qp->qpn); - return err; } EXPORT_SYMBOL_GPL(mlx4_qp_alloc); @@ -239,9 +259,6 @@ void mlx4_qp_free(struct mlx4_dev *dev, struct mlx4_qp *qp) mlx4_table_put(dev, &qp_table->altc_table, qp->qpn); mlx4_table_put(dev, &qp_table->auxc_table, qp->qpn); mlx4_table_put(dev, &qp_table->qp_table, qp->qpn); - - if (qp->qpn >= dev->caps.sqp_start + 8) - mlx4_bitmap_free(&qp_table->bitmap, qp->qpn); } EXPORT_SYMBOL_GPL(mlx4_qp_free); @@ -255,6 +272,7 @@ int mlx4_init_qp_table(struct mlx4_dev *dev) { struct mlx4_qp_table *qp_table = &mlx4_priv(dev)->qp_table; int err; + int reserved_from_top = 0; spin_lock_init(&qp_table->lock); INIT_RADIX_TREE(&dev->qp_table_tree, GFP_ATOMIC); @@ -264,9 +282,40 @@ int mlx4_init_qp_table(struct mlx4_dev *dev) * block of special QPs must be aligned to a multiple of 8, so * round up. */ - dev->caps.sqp_start = ALIGN(dev->caps.reserved_qps, 8); + dev->caps.sqp_start = + ALIGN(dev->caps.reserved_qps_cnt[MLX4_QP_REGION_FW], 8); + + { + int sort[MLX4_NUM_QP_REGION]; + int i, j, tmp; + int last_base = dev->caps.num_qps; + + for (i = 1; i < MLX4_NUM_QP_REGION; ++i) + sort[i] = i; + + for (i = MLX4_NUM_QP_REGION; i > 0; --i) { + for (j = 2; j < i; ++j) { + if (dev->caps.reserved_qps_cnt[sort[j]] > + dev->caps.reserved_qps_cnt[sort[j - 1]]) { + tmp = sort[j]; + sort[j] = sort[j - 1]; + sort[j - 1] = tmp; + } + } + } + + for (i = 1; i < MLX4_NUM_QP_REGION; ++i) { + last_base -= dev->caps.reserved_qps_cnt[sort[i]]; + dev->caps.reserved_qps_base[sort[i]] = last_base; + reserved_from_top += + dev->caps.reserved_qps_cnt[sort[i]]; + } + + } + err = mlx4_bitmap_init(&qp_table->bitmap, dev->caps.num_qps, - (1 << 24) - 1, dev->caps.sqp_start + 8); + (1 << 23) - 1, dev->caps.sqp_start + 8, + reserved_from_top); if (err) return err; diff --git a/drivers/net/mlx4/srq.c b/drivers/net/mlx4/srq.c index 533eb6db24b3..fe9f218691f5 100644 --- a/drivers/net/mlx4/srq.c +++ b/drivers/net/mlx4/srq.c @@ -245,7 +245,7 @@ int mlx4_init_srq_table(struct mlx4_dev *dev) INIT_RADIX_TREE(&srq_table->tree, GFP_ATOMIC); err = mlx4_bitmap_init(&srq_table->bitmap, dev->caps.num_srqs, - dev->caps.num_srqs - 1, dev->caps.reserved_srqs); + dev->caps.num_srqs - 1, dev->caps.reserved_srqs, 0); if (err) return err; diff --git a/drivers/net/xtsonic.c b/drivers/net/xtsonic.c new file mode 100644 index 000000000000..da42aa06a3ba --- /dev/null +++ b/drivers/net/xtsonic.c @@ -0,0 +1,319 @@ +/* + * xtsonic.c + * + * (C) 2001 - 2007 Tensilica Inc. + * Kevin Chea <kchea@yahoo.com> + * Marc Gauthier <marc@linux-xtensa.org> + * Chris Zankel <chris@zankel.net> + * + * (C) 1996,1998 by Thomas Bogendoerfer (tsbogend@alpha.franken.de) + * + * This driver is based on work from Andreas Busse, but most of + * the code is rewritten. + * + * (C) 1995 by Andreas Busse (andy@waldorf-gmbh.de) + * + * A driver for the onboard Sonic ethernet controller on the XT2000. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/fcntl.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/in.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/skbuff.h> +#include <linux/platform_device.h> +#include <linux/dma-mapping.h> + +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/dma.h> + +static char xtsonic_string[] = "xtsonic"; + +extern unsigned xtboard_nvram_valid(void); +extern void xtboard_get_ether_addr(unsigned char *buf); + +#include "sonic.h" + +/* + * According to the documentation for the Sonic ethernet controller, + * EOBC should be 760 words (1520 bytes) for 32-bit applications, and, + * as such, 2 words less than the buffer size. The value for RBSIZE + * defined in sonic.h, however is only 1520. + * + * (Note that in 16-bit configurations, EOBC is 759 words (1518 bytes) and + * RBSIZE 1520 bytes) + */ +#undef SONIC_RBSIZE +#define SONIC_RBSIZE 1524 + +/* + * The chip provides 256 byte register space. + */ +#define SONIC_MEM_SIZE 0x100 + +/* + * Macros to access SONIC registers + */ +#define SONIC_READ(reg) \ + (0xffff & *((volatile unsigned int *)dev->base_addr+reg)) + +#define SONIC_WRITE(reg,val) \ + *((volatile unsigned int *)dev->base_addr+reg) = val + + +/* Use 0 for production, 1 for verification, and >2 for debug */ +#ifdef SONIC_DEBUG +static unsigned int sonic_debug = SONIC_DEBUG; +#else +static unsigned int sonic_debug = 1; +#endif + +/* + * We cannot use station (ethernet) address prefixes to detect the + * sonic controller since these are board manufacturer depended. + * So we check for known Silicon Revision IDs instead. + */ +static unsigned short known_revisions[] = +{ + 0x101, /* SONIC 83934 */ + 0xffff /* end of list */ +}; + +static int xtsonic_open(struct net_device *dev) +{ + if (request_irq(dev->irq,&sonic_interrupt,IRQF_DISABLED,"sonic",dev)) { + printk(KERN_ERR "%s: unable to get IRQ %d.\n", + dev->name, dev->irq); + return -EAGAIN; + } + return sonic_open(dev); +} + +static int xtsonic_close(struct net_device *dev) +{ + int err; + err = sonic_close(dev); + free_irq(dev->irq, dev); + return err; +} + +static int __init sonic_probe1(struct net_device *dev) +{ + static unsigned version_printed = 0; + unsigned int silicon_revision; + struct sonic_local *lp = netdev_priv(dev); + unsigned int base_addr = dev->base_addr; + int i; + int err = 0; + + if (!request_mem_region(base_addr, 0x100, xtsonic_string)) + return -EBUSY; + + /* + * get the Silicon Revision ID. If this is one of the known + * one assume that we found a SONIC ethernet controller at + * the expected location. + */ + silicon_revision = SONIC_READ(SONIC_SR); + if (sonic_debug > 1) + printk("SONIC Silicon Revision = 0x%04x\n",silicon_revision); + + i = 0; + while ((known_revisions[i] != 0xffff) && + (known_revisions[i] != silicon_revision)) + i++; + + if (known_revisions[i] == 0xffff) { + printk("SONIC ethernet controller not found (0x%4x)\n", + silicon_revision); + return -ENODEV; + } + + if (sonic_debug && version_printed++ == 0) + printk(version); + + /* + * Put the sonic into software reset, then retrieve ethernet address. + * Note: we are assuming that the boot-loader has initialized the cam. + */ + SONIC_WRITE(SONIC_CMD,SONIC_CR_RST); + SONIC_WRITE(SONIC_DCR, + SONIC_DCR_WC0|SONIC_DCR_DW|SONIC_DCR_LBR|SONIC_DCR_SBUS); + SONIC_WRITE(SONIC_CEP,0); + SONIC_WRITE(SONIC_IMR,0); + + SONIC_WRITE(SONIC_CMD,SONIC_CR_RST); + SONIC_WRITE(SONIC_CEP,0); + + for (i=0; i<3; i++) { + unsigned int val = SONIC_READ(SONIC_CAP0-i); + dev->dev_addr[i*2] = val; + dev->dev_addr[i*2+1] = val >> 8; + } + + /* Initialize the device structure. */ + + lp->dma_bitmode = SONIC_BITMODE32; + + /* + * Allocate local private descriptor areas in uncached space. + * The entire structure must be located within the same 64kb segment. + * A simple way to ensure this is to allocate twice the + * size of the structure -- given that the structure is + * much less than 64 kB, at least one of the halves of + * the allocated area will be contained entirely in 64 kB. + * We also allocate extra space for a pointer to allow freeing + * this structure later on (in xtsonic_cleanup_module()). + */ + lp->descriptors = + dma_alloc_coherent(lp->device, + SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), + &lp->descriptors_laddr, GFP_KERNEL); + + if (lp->descriptors == NULL) { + printk(KERN_ERR "%s: couldn't alloc DMA memory for " + " descriptors.\n", lp->device->bus_id); + goto out; + } + + lp->cda = lp->descriptors; + lp->tda = lp->cda + (SIZEOF_SONIC_CDA + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rda = lp->tda + (SIZEOF_SONIC_TD * SONIC_NUM_TDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rra = lp->rda + (SIZEOF_SONIC_RD * SONIC_NUM_RDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + + /* get the virtual dma address */ + + lp->cda_laddr = lp->descriptors_laddr; + lp->tda_laddr = lp->cda_laddr + (SIZEOF_SONIC_CDA + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rda_laddr = lp->tda_laddr + (SIZEOF_SONIC_TD * SONIC_NUM_TDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + lp->rra_laddr = lp->rda_laddr + (SIZEOF_SONIC_RD * SONIC_NUM_RDS + * SONIC_BUS_SCALE(lp->dma_bitmode)); + + dev->open = xtsonic_open; + dev->stop = xtsonic_close; + dev->hard_start_xmit = sonic_send_packet; + dev->get_stats = sonic_get_stats; + dev->set_multicast_list = &sonic_multicast_list; + dev->tx_timeout = sonic_tx_timeout; + dev->watchdog_timeo = TX_TIMEOUT; + + /* + * clear tally counter + */ + SONIC_WRITE(SONIC_CRCT,0xffff); + SONIC_WRITE(SONIC_FAET,0xffff); + SONIC_WRITE(SONIC_MPT,0xffff); + + return 0; +out: + release_region(dev->base_addr, SONIC_MEM_SIZE); + return err; +} + + +/* + * Probe for a SONIC ethernet controller on an XT2000 board. + * Actually probing is superfluous but we're paranoid. + */ + +int __init xtsonic_probe(struct platform_device *pdev) +{ + struct net_device *dev; + struct sonic_local *lp; + struct resource *resmem, *resirq; + int err = 0; + + DECLARE_MAC_BUF(mac); + + if ((resmem = platform_get_resource(pdev, IORESOURCE_MEM, 0)) == NULL) + return -ENODEV; + + if ((resirq = platform_get_resource(pdev, IORESOURCE_IRQ, 0)) == NULL) + return -ENODEV; + + if ((dev = alloc_etherdev(sizeof(struct sonic_local))) == NULL) + return -ENOMEM; + + lp = netdev_priv(dev); + lp->device = &pdev->dev; + SET_NETDEV_DEV(dev, &pdev->dev); + netdev_boot_setup_check(dev); + + dev->base_addr = resmem->start; + dev->irq = resirq->start; + + if ((err = sonic_probe1(dev))) + goto out; + if ((err = register_netdev(dev))) + goto out1; + + printk("%s: SONIC ethernet @%08lx, MAC %s, IRQ %d\n", dev->name, + dev->base_addr, print_mac(mac, dev->dev_addr), dev->irq); + + return 0; + +out1: + release_region(dev->base_addr, SONIC_MEM_SIZE); +out: + free_netdev(dev); + + return err; +} + +MODULE_DESCRIPTION("Xtensa XT2000 SONIC ethernet driver"); +module_param(sonic_debug, int, 0); +MODULE_PARM_DESC(sonic_debug, "xtsonic debug level (1-4)"); + +#include "sonic.c" + +static int __devexit xtsonic_device_remove (struct platform_device *pdev) +{ + struct net_device *dev = platform_get_drvdata(pdev); + struct sonic_local *lp = netdev_priv(dev); + + unregister_netdev(dev); + dma_free_coherent(lp->device, + SIZEOF_SONIC_DESC * SONIC_BUS_SCALE(lp->dma_bitmode), + lp->descriptors, lp->descriptors_laddr); + release_region (dev->base_addr, SONIC_MEM_SIZE); + free_netdev(dev); + + return 0; +} + +static struct platform_driver xtsonic_driver = { + .probe = xtsonic_probe, + .remove = __devexit_p(xtsonic_device_remove), + .driver = { + .name = xtsonic_string, + }, +}; + +static int __init xtsonic_init(void) +{ + return platform_driver_register(&xtsonic_driver); +} + +static void __exit xtsonic_cleanup(void) +{ + platform_driver_unregister(&xtsonic_driver); +} + +module_init(xtsonic_init); +module_exit(xtsonic_cleanup); diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c index 6a98dc8aa30b..24bbef777c19 100644 --- a/drivers/of/of_i2c.c +++ b/drivers/of/of_i2c.c @@ -41,7 +41,7 @@ void of_register_i2c_devices(struct i2c_adapter *adap, info.addr = *addr; - request_module(info.type); + request_module("%s", info.type); result = i2c_new_device(adap, &info); if (result == NULL) { diff --git a/drivers/of/of_spi.c b/drivers/of/of_spi.c index b01eec026f68..bed0ed6dcdc1 100644 --- a/drivers/of/of_spi.c +++ b/drivers/of/of_spi.c @@ -61,6 +61,8 @@ void of_register_spi_devices(struct spi_master *master, struct device_node *np) spi->mode |= SPI_CPHA; if (of_find_property(nc, "spi-cpol", NULL)) spi->mode |= SPI_CPOL; + if (of_find_property(nc, "spi-cs-high", NULL)) + spi->mode |= SPI_CS_HIGH; /* Device speed */ prop = of_get_property(nc, "spi-max-frequency", &len); diff --git a/drivers/oprofile/buffer_sync.c b/drivers/oprofile/buffer_sync.c index ed982273fb8b..b55cd23ffdef 100644 --- a/drivers/oprofile/buffer_sync.c +++ b/drivers/oprofile/buffer_sync.c @@ -41,7 +41,6 @@ static cpumask_t marked_cpus = CPU_MASK_NONE; static DEFINE_SPINLOCK(task_mortuary); static void process_task_mortuary(void); - /* Take ownership of the task struct and place it on the * list for processing. Only after two full buffer syncs * does the task eventually get freed, because by then @@ -341,7 +340,7 @@ static void add_trace_begin(void) * Add IBS fetch and op entries to event buffer */ static void add_ibs_begin(struct oprofile_cpu_buffer *cpu_buf, int code, - int in_kernel, struct mm_struct *mm) + struct mm_struct *mm) { unsigned long rip; int i, count; @@ -565,9 +564,11 @@ void sync_buffer(int cpu) struct task_struct *new; unsigned long cookie = 0; int in_kernel = 1; - unsigned int i; sync_buffer_state state = sb_buffer_start; +#ifndef CONFIG_OPROFILE_IBS + unsigned int i; unsigned long available; +#endif mutex_lock(&buffer_mutex); @@ -575,9 +576,13 @@ void sync_buffer(int cpu) /* Remember, only we can modify tail_pos */ +#ifndef CONFIG_OPROFILE_IBS available = get_slots(cpu_buf); for (i = 0; i < available; ++i) { +#else + while (get_slots(cpu_buf)) { +#endif struct op_sample *s = &cpu_buf->buffer[cpu_buf->tail_pos]; if (is_code(s->eip)) { @@ -593,12 +598,10 @@ void sync_buffer(int cpu) #ifdef CONFIG_OPROFILE_IBS } else if (s->event == IBS_FETCH_BEGIN) { state = sb_bt_start; - add_ibs_begin(cpu_buf, - IBS_FETCH_CODE, in_kernel, mm); + add_ibs_begin(cpu_buf, IBS_FETCH_CODE, mm); } else if (s->event == IBS_OP_BEGIN) { state = sb_bt_start; - add_ibs_begin(cpu_buf, - IBS_OP_CODE, in_kernel, mm); + add_ibs_begin(cpu_buf, IBS_OP_CODE, mm); #endif } else { struct mm_struct *oldmm = mm; @@ -628,3 +631,27 @@ void sync_buffer(int cpu) mutex_unlock(&buffer_mutex); } + +/* The function can be used to add a buffer worth of data directly to + * the kernel buffer. The buffer is assumed to be a circular buffer. + * Take the entries from index start and end at index end, wrapping + * at max_entries. + */ +void oprofile_put_buff(unsigned long *buf, unsigned int start, + unsigned int stop, unsigned int max) +{ + int i; + + i = start; + + mutex_lock(&buffer_mutex); + while (i != stop) { + add_event_entry(buf[i++]); + + if (i >= max) + i = 0; + } + + mutex_unlock(&buffer_mutex); +} + diff --git a/drivers/oprofile/buffer_sync.h b/drivers/oprofile/buffer_sync.h index 08866f6a96a3..3110732c1835 100644 --- a/drivers/oprofile/buffer_sync.h +++ b/drivers/oprofile/buffer_sync.h @@ -9,13 +9,13 @@ #ifndef OPROFILE_BUFFER_SYNC_H #define OPROFILE_BUFFER_SYNC_H - + /* add the necessary profiling hooks */ int sync_start(void); /* remove the hooks */ void sync_stop(void); - + /* sync the given CPU's buffer */ void sync_buffer(int cpu); diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c index e1bd5a937f6c..01d38e78cde1 100644 --- a/drivers/oprofile/cpu_buffer.c +++ b/drivers/oprofile/cpu_buffer.c @@ -22,7 +22,7 @@ #include <linux/oprofile.h> #include <linux/vmalloc.h> #include <linux/errno.h> - + #include "event_buffer.h" #include "cpu_buffer.h" #include "buffer_sync.h" @@ -38,27 +38,40 @@ static int work_enabled; void free_cpu_buffers(void) { int i; - - for_each_online_cpu(i) { + + for_each_possible_cpu(i) { vfree(per_cpu(cpu_buffer, i).buffer); per_cpu(cpu_buffer, i).buffer = NULL; } } +unsigned long oprofile_get_cpu_buffer_size(void) +{ + return fs_cpu_buffer_size; +} + +void oprofile_cpu_buffer_inc_smpl_lost(void) +{ + struct oprofile_cpu_buffer *cpu_buf + = &__get_cpu_var(cpu_buffer); + + cpu_buf->sample_lost_overflow++; +} + int alloc_cpu_buffers(void) { int i; - + unsigned long buffer_size = fs_cpu_buffer_size; - - for_each_online_cpu(i) { + + for_each_possible_cpu(i) { struct oprofile_cpu_buffer *b = &per_cpu(cpu_buffer, i); - + b->buffer = vmalloc_node(sizeof(struct op_sample) * buffer_size, cpu_to_node(i)); if (!b->buffer) goto fail; - + b->last_task = NULL; b->last_is_kernel = -1; b->tracing = 0; @@ -112,7 +125,7 @@ void end_cpu_work(void) } /* Resets the cpu buffer to a sane state. */ -void cpu_buffer_reset(struct oprofile_cpu_buffer * cpu_buf) +void cpu_buffer_reset(struct oprofile_cpu_buffer *cpu_buf) { /* reset these to invalid values; the next sample * collected will populate the buffer with proper @@ -123,7 +136,7 @@ void cpu_buffer_reset(struct oprofile_cpu_buffer * cpu_buf) } /* compute number of available slots in cpu_buffer queue */ -static unsigned long nr_available_slots(struct oprofile_cpu_buffer const * b) +static unsigned long nr_available_slots(struct oprofile_cpu_buffer const *b) { unsigned long head = b->head_pos; unsigned long tail = b->tail_pos; @@ -134,7 +147,7 @@ static unsigned long nr_available_slots(struct oprofile_cpu_buffer const * b) return tail + (b->buffer_size - head) - 1; } -static void increment_head(struct oprofile_cpu_buffer * b) +static void increment_head(struct oprofile_cpu_buffer *b) { unsigned long new_head = b->head_pos + 1; @@ -149,17 +162,17 @@ static void increment_head(struct oprofile_cpu_buffer * b) } static inline void -add_sample(struct oprofile_cpu_buffer * cpu_buf, - unsigned long pc, unsigned long event) +add_sample(struct oprofile_cpu_buffer *cpu_buf, + unsigned long pc, unsigned long event) { - struct op_sample * entry = &cpu_buf->buffer[cpu_buf->head_pos]; + struct op_sample *entry = &cpu_buf->buffer[cpu_buf->head_pos]; entry->eip = pc; entry->event = event; increment_head(cpu_buf); } static inline void -add_code(struct oprofile_cpu_buffer * buffer, unsigned long value) +add_code(struct oprofile_cpu_buffer *buffer, unsigned long value) { add_sample(buffer, ESCAPE_CODE, value); } @@ -173,10 +186,10 @@ add_code(struct oprofile_cpu_buffer * buffer, unsigned long value) * pc. We tag this in the buffer by generating kernel enter/exit * events whenever is_kernel changes */ -static int log_sample(struct oprofile_cpu_buffer * cpu_buf, unsigned long pc, +static int log_sample(struct oprofile_cpu_buffer *cpu_buf, unsigned long pc, int is_kernel, unsigned long event) { - struct task_struct * task; + struct task_struct *task; cpu_buf->sample_received++; @@ -205,7 +218,7 @@ static int log_sample(struct oprofile_cpu_buffer * cpu_buf, unsigned long pc, cpu_buf->last_task = task; add_code(cpu_buf, (unsigned long)task); } - + add_sample(cpu_buf, pc, event); return 1; } @@ -222,7 +235,7 @@ static int oprofile_begin_trace(struct oprofile_cpu_buffer *cpu_buf) return 1; } -static void oprofile_end_trace(struct oprofile_cpu_buffer * cpu_buf) +static void oprofile_end_trace(struct oprofile_cpu_buffer *cpu_buf) { cpu_buf->tracing = 0; } @@ -257,21 +270,23 @@ void oprofile_add_sample(struct pt_regs * const regs, unsigned long event) #ifdef CONFIG_OPROFILE_IBS -#define MAX_IBS_SAMPLE_SIZE 14 -static int log_ibs_sample(struct oprofile_cpu_buffer *cpu_buf, - unsigned long pc, int is_kernel, unsigned int *ibs, int ibs_code) +#define MAX_IBS_SAMPLE_SIZE 14 + +void oprofile_add_ibs_sample(struct pt_regs *const regs, + unsigned int *const ibs_sample, int ibs_code) { + int is_kernel = !user_mode(regs); + struct oprofile_cpu_buffer *cpu_buf = &__get_cpu_var(cpu_buffer); struct task_struct *task; cpu_buf->sample_received++; if (nr_available_slots(cpu_buf) < MAX_IBS_SAMPLE_SIZE) { + /* we can't backtrace since we lost the source of this event */ cpu_buf->sample_lost_overflow++; - return 0; + return; } - is_kernel = !!is_kernel; - /* notice a switch from user->kernel or vice versa */ if (cpu_buf->last_is_kernel != is_kernel) { cpu_buf->last_is_kernel = is_kernel; @@ -281,7 +296,6 @@ static int log_ibs_sample(struct oprofile_cpu_buffer *cpu_buf, /* notice a task switch */ if (!is_kernel) { task = current; - if (cpu_buf->last_task != task) { cpu_buf->last_task = task; add_code(cpu_buf, (unsigned long)task); @@ -289,36 +303,17 @@ static int log_ibs_sample(struct oprofile_cpu_buffer *cpu_buf, } add_code(cpu_buf, ibs_code); - add_sample(cpu_buf, ibs[0], ibs[1]); - add_sample(cpu_buf, ibs[2], ibs[3]); - add_sample(cpu_buf, ibs[4], ibs[5]); + add_sample(cpu_buf, ibs_sample[0], ibs_sample[1]); + add_sample(cpu_buf, ibs_sample[2], ibs_sample[3]); + add_sample(cpu_buf, ibs_sample[4], ibs_sample[5]); if (ibs_code == IBS_OP_BEGIN) { - add_sample(cpu_buf, ibs[6], ibs[7]); - add_sample(cpu_buf, ibs[8], ibs[9]); - add_sample(cpu_buf, ibs[10], ibs[11]); - } - - return 1; -} - -void oprofile_add_ibs_sample(struct pt_regs *const regs, - unsigned int * const ibs_sample, u8 code) -{ - int is_kernel = !user_mode(regs); - unsigned long pc = profile_pc(regs); - - struct oprofile_cpu_buffer *cpu_buf = - &per_cpu(cpu_buffer, smp_processor_id()); - - if (!backtrace_depth) { - log_ibs_sample(cpu_buf, pc, is_kernel, ibs_sample, code); - return; + add_sample(cpu_buf, ibs_sample[6], ibs_sample[7]); + add_sample(cpu_buf, ibs_sample[8], ibs_sample[9]); + add_sample(cpu_buf, ibs_sample[10], ibs_sample[11]); } - /* if log_sample() fails we can't backtrace since we lost the source - * of this event */ - if (log_ibs_sample(cpu_buf, pc, is_kernel, ibs_sample, code)) + if (backtrace_depth) oprofile_ops.backtrace(regs, backtrace_depth); } @@ -363,11 +358,16 @@ void oprofile_add_trace(unsigned long pc) */ static void wq_sync_buffer(struct work_struct *work) { - struct oprofile_cpu_buffer * b = + struct oprofile_cpu_buffer *b = container_of(work, struct oprofile_cpu_buffer, work.work); if (b->cpu != smp_processor_id()) { printk(KERN_DEBUG "WQ on CPU%d, prefer CPU%d\n", smp_processor_id(), b->cpu); + + if (!cpu_online(b->cpu)) { + cancel_delayed_work(&b->work); + return; + } } sync_buffer(b->cpu); diff --git a/drivers/oprofile/cpu_buffer.h b/drivers/oprofile/cpu_buffer.h index 9c44d004da69..d3cc26264db5 100644 --- a/drivers/oprofile/cpu_buffer.h +++ b/drivers/oprofile/cpu_buffer.h @@ -15,9 +15,9 @@ #include <linux/workqueue.h> #include <linux/cache.h> #include <linux/sched.h> - + struct task_struct; - + int alloc_cpu_buffers(void); void free_cpu_buffers(void); @@ -31,15 +31,15 @@ struct op_sample { unsigned long eip; unsigned long event; }; - + struct oprofile_cpu_buffer { volatile unsigned long head_pos; volatile unsigned long tail_pos; unsigned long buffer_size; - struct task_struct * last_task; + struct task_struct *last_task; int last_is_kernel; int tracing; - struct op_sample * buffer; + struct op_sample *buffer; unsigned long sample_received; unsigned long sample_lost_overflow; unsigned long backtrace_aborted; @@ -50,7 +50,7 @@ struct oprofile_cpu_buffer { DECLARE_PER_CPU(struct oprofile_cpu_buffer, cpu_buffer); -void cpu_buffer_reset(struct oprofile_cpu_buffer * cpu_buf); +void cpu_buffer_reset(struct oprofile_cpu_buffer *cpu_buf); /* transient events for the CPU buffer -> event buffer */ #define CPU_IS_KERNEL 1 diff --git a/drivers/oprofile/event_buffer.c b/drivers/oprofile/event_buffer.c index 8d692a5c8e73..d962ba0dd87a 100644 --- a/drivers/oprofile/event_buffer.c +++ b/drivers/oprofile/event_buffer.c @@ -19,16 +19,16 @@ #include <linux/dcookies.h> #include <linux/fs.h> #include <asm/uaccess.h> - + #include "oprof.h" #include "event_buffer.h" #include "oprofile_stats.h" DEFINE_MUTEX(buffer_mutex); - + static unsigned long buffer_opened; static DECLARE_WAIT_QUEUE_HEAD(buffer_wait); -static unsigned long * event_buffer; +static unsigned long *event_buffer; static unsigned long buffer_size; static unsigned long buffer_watershed; static size_t buffer_pos; @@ -66,7 +66,7 @@ void wake_up_buffer_waiter(void) mutex_unlock(&buffer_mutex); } - + int alloc_event_buffer(void) { int err = -ENOMEM; @@ -76,13 +76,13 @@ int alloc_event_buffer(void) buffer_size = fs_buffer_size; buffer_watershed = fs_buffer_watershed; spin_unlock_irqrestore(&oprofilefs_lock, flags); - + if (buffer_watershed >= buffer_size) return -EINVAL; - + event_buffer = vmalloc(sizeof(unsigned long) * buffer_size); if (!event_buffer) - goto out; + goto out; err = 0; out: @@ -97,8 +97,8 @@ void free_event_buffer(void) event_buffer = NULL; } - -static int event_buffer_open(struct inode * inode, struct file * file) + +static int event_buffer_open(struct inode *inode, struct file *file) { int err = -EPERM; @@ -116,14 +116,14 @@ static int event_buffer_open(struct inode * inode, struct file * file) file->private_data = dcookie_register(); if (!file->private_data) goto out; - + if ((err = oprofile_setup())) goto fail; /* NB: the actual start happens from userspace * echo 1 >/dev/oprofile/enable */ - + return 0; fail: @@ -134,7 +134,7 @@ out: } -static int event_buffer_release(struct inode * inode, struct file * file) +static int event_buffer_release(struct inode *inode, struct file *file) { oprofile_stop(); oprofile_shutdown(); @@ -146,8 +146,8 @@ static int event_buffer_release(struct inode * inode, struct file * file) } -static ssize_t event_buffer_read(struct file * file, char __user * buf, - size_t count, loff_t * offset) +static ssize_t event_buffer_read(struct file *file, char __user *buf, + size_t count, loff_t *offset) { int retval = -EINVAL; size_t const max = buffer_size * sizeof(unsigned long); @@ -172,18 +172,18 @@ static ssize_t event_buffer_read(struct file * file, char __user * buf, retval = -EFAULT; count = buffer_pos * sizeof(unsigned long); - + if (copy_to_user(buf, event_buffer, count)) goto out; retval = count; buffer_pos = 0; - + out: mutex_unlock(&buffer_mutex); return retval; } - + const struct file_operations event_buffer_fops = { .open = event_buffer_open, .release = event_buffer_release, diff --git a/drivers/oprofile/event_buffer.h b/drivers/oprofile/event_buffer.h index 5076ed1ebd8f..4e70749f8d16 100644 --- a/drivers/oprofile/event_buffer.h +++ b/drivers/oprofile/event_buffer.h @@ -10,13 +10,20 @@ #ifndef EVENT_BUFFER_H #define EVENT_BUFFER_H -#include <linux/types.h> +#include <linux/types.h> #include <asm/mutex.h> - + int alloc_event_buffer(void); void free_event_buffer(void); - + +/** + * Add data to the event buffer. + * The data passed is free-form, but typically consists of + * file offsets, dcookies, context information, and ESCAPE codes. + */ +void add_event_entry(unsigned long data); + /* wake up the process sleeping on the event file */ void wake_up_buffer_waiter(void); @@ -24,10 +31,10 @@ void wake_up_buffer_waiter(void); #define NO_COOKIE 0UL extern const struct file_operations event_buffer_fops; - + /* mutex between sync_cpu_buffers() and the * file reading code. */ extern struct mutex buffer_mutex; - + #endif /* EVENT_BUFFER_H */ diff --git a/drivers/oprofile/oprof.c b/drivers/oprofile/oprof.c index 2c645170f06e..cd375907f26f 100644 --- a/drivers/oprofile/oprof.c +++ b/drivers/oprofile/oprof.c @@ -19,7 +19,7 @@ #include "cpu_buffer.h" #include "buffer_sync.h" #include "oprofile_stats.h" - + struct oprofile_operations oprofile_ops; unsigned long oprofile_started; @@ -36,7 +36,7 @@ static int timer = 0; int oprofile_setup(void) { int err; - + mutex_lock(&start_mutex); if ((err = alloc_cpu_buffers())) @@ -44,10 +44,10 @@ int oprofile_setup(void) if ((err = alloc_event_buffer())) goto out1; - + if (oprofile_ops.setup && (err = oprofile_ops.setup())) goto out2; - + /* Note even though this starts part of the * profiling overhead, it's necessary to prevent * us missing task deaths and eventually oopsing @@ -74,7 +74,7 @@ post_sync: is_setup = 1; mutex_unlock(&start_mutex); return 0; - + out3: if (oprofile_ops.shutdown) oprofile_ops.shutdown(); @@ -92,17 +92,17 @@ out: int oprofile_start(void) { int err = -EINVAL; - + mutex_lock(&start_mutex); - + if (!is_setup) goto out; - err = 0; - + err = 0; + if (oprofile_started) goto out; - + oprofile_reset_stats(); if ((err = oprofile_ops.start())) @@ -114,7 +114,7 @@ out: return err; } - + /* echo 0>/dev/oprofile/enable */ void oprofile_stop(void) { @@ -204,13 +204,13 @@ static void __exit oprofile_exit(void) oprofile_arch_exit(); } - + module_init(oprofile_init); module_exit(oprofile_exit); module_param_named(timer, timer, int, 0644); MODULE_PARM_DESC(timer, "force use of timer interrupt"); - + MODULE_LICENSE("GPL"); MODULE_AUTHOR("John Levon <levon@movementarian.org>"); MODULE_DESCRIPTION("OProfile system profiler"); diff --git a/drivers/oprofile/oprof.h b/drivers/oprofile/oprof.h index 18323650806e..5df0c21a608f 100644 --- a/drivers/oprofile/oprof.h +++ b/drivers/oprofile/oprof.h @@ -11,7 +11,7 @@ #define OPROF_H int oprofile_setup(void); -void oprofile_shutdown(void); +void oprofile_shutdown(void); int oprofilefs_register(void); void oprofilefs_unregister(void); @@ -20,20 +20,20 @@ int oprofile_start(void); void oprofile_stop(void); struct oprofile_operations; - + extern unsigned long fs_buffer_size; extern unsigned long fs_cpu_buffer_size; extern unsigned long fs_buffer_watershed; extern struct oprofile_operations oprofile_ops; extern unsigned long oprofile_started; extern unsigned long backtrace_depth; - + struct super_block; struct dentry; -void oprofile_create_files(struct super_block * sb, struct dentry * root); -void oprofile_timer_init(struct oprofile_operations * ops); +void oprofile_create_files(struct super_block *sb, struct dentry *root); +void oprofile_timer_init(struct oprofile_operations *ops); int oprofile_set_backtrace(unsigned long depth); - + #endif /* OPROF_H */ diff --git a/drivers/oprofile/oprofile_files.c b/drivers/oprofile/oprofile_files.c index ef953ba5ab6b..cc106d503ace 100644 --- a/drivers/oprofile/oprofile_files.c +++ b/drivers/oprofile/oprofile_files.c @@ -13,18 +13,18 @@ #include "event_buffer.h" #include "oprofile_stats.h" #include "oprof.h" - + unsigned long fs_buffer_size = 131072; unsigned long fs_cpu_buffer_size = 8192; unsigned long fs_buffer_watershed = 32768; /* FIXME: tune */ -static ssize_t depth_read(struct file * file, char __user * buf, size_t count, loff_t * offset) +static ssize_t depth_read(struct file *file, char __user *buf, size_t count, loff_t *offset) { return oprofilefs_ulong_to_user(backtrace_depth, buf, count, offset); } -static ssize_t depth_write(struct file * file, char const __user * buf, size_t count, loff_t * offset) +static ssize_t depth_write(struct file *file, char const __user *buf, size_t count, loff_t *offset) { unsigned long val; int retval; @@ -49,8 +49,8 @@ static const struct file_operations depth_fops = { .write = depth_write }; - -static ssize_t pointer_size_read(struct file * file, char __user * buf, size_t count, loff_t * offset) + +static ssize_t pointer_size_read(struct file *file, char __user *buf, size_t count, loff_t *offset) { return oprofilefs_ulong_to_user(sizeof(void *), buf, count, offset); } @@ -61,24 +61,24 @@ static const struct file_operations pointer_size_fops = { }; -static ssize_t cpu_type_read(struct file * file, char __user * buf, size_t count, loff_t * offset) +static ssize_t cpu_type_read(struct file *file, char __user *buf, size_t count, loff_t *offset) { return oprofilefs_str_to_user(oprofile_ops.cpu_type, buf, count, offset); } - - + + static const struct file_operations cpu_type_fops = { .read = cpu_type_read, }; - - -static ssize_t enable_read(struct file * file, char __user * buf, size_t count, loff_t * offset) + + +static ssize_t enable_read(struct file *file, char __user *buf, size_t count, loff_t *offset) { return oprofilefs_ulong_to_user(oprofile_started, buf, count, offset); } -static ssize_t enable_write(struct file * file, char const __user * buf, size_t count, loff_t * offset) +static ssize_t enable_write(struct file *file, char const __user *buf, size_t count, loff_t *offset) { unsigned long val; int retval; @@ -89,7 +89,7 @@ static ssize_t enable_write(struct file * file, char const __user * buf, size_t retval = oprofilefs_ulong_from_user(&val, buf, count); if (retval) return retval; - + if (val) retval = oprofile_start(); else @@ -100,14 +100,14 @@ static ssize_t enable_write(struct file * file, char const __user * buf, size_t return count; } - + static const struct file_operations enable_fops = { .read = enable_read, .write = enable_write, }; -static ssize_t dump_write(struct file * file, char const __user * buf, size_t count, loff_t * offset) +static ssize_t dump_write(struct file *file, char const __user *buf, size_t count, loff_t *offset) { wake_up_buffer_waiter(); return count; @@ -117,8 +117,8 @@ static ssize_t dump_write(struct file * file, char const __user * buf, size_t co static const struct file_operations dump_fops = { .write = dump_write, }; - -void oprofile_create_files(struct super_block * sb, struct dentry * root) + +void oprofile_create_files(struct super_block *sb, struct dentry *root) { oprofilefs_create_file(sb, root, "enable", &enable_fops); oprofilefs_create_file_perm(sb, root, "dump", &dump_fops, 0666); @@ -126,7 +126,7 @@ void oprofile_create_files(struct super_block * sb, struct dentry * root) oprofilefs_create_ulong(sb, root, "buffer_size", &fs_buffer_size); oprofilefs_create_ulong(sb, root, "buffer_watershed", &fs_buffer_watershed); oprofilefs_create_ulong(sb, root, "cpu_buffer_size", &fs_cpu_buffer_size); - oprofilefs_create_file(sb, root, "cpu_type", &cpu_type_fops); + oprofilefs_create_file(sb, root, "cpu_type", &cpu_type_fops); oprofilefs_create_file(sb, root, "backtrace_depth", &depth_fops); oprofilefs_create_file(sb, root, "pointer_size", &pointer_size_fops); oprofile_create_stats_files(sb, root); diff --git a/drivers/oprofile/oprofile_stats.c b/drivers/oprofile/oprofile_stats.c index f99b28e7b79a..e1f6ce03705e 100644 --- a/drivers/oprofile/oprofile_stats.c +++ b/drivers/oprofile/oprofile_stats.c @@ -11,17 +11,17 @@ #include <linux/smp.h> #include <linux/cpumask.h> #include <linux/threads.h> - + #include "oprofile_stats.h" #include "cpu_buffer.h" - + struct oprofile_stat_struct oprofile_stats; - + void oprofile_reset_stats(void) { - struct oprofile_cpu_buffer * cpu_buf; + struct oprofile_cpu_buffer *cpu_buf; int i; - + for_each_possible_cpu(i) { cpu_buf = &per_cpu(cpu_buffer, i); cpu_buf->sample_received = 0; @@ -29,18 +29,18 @@ void oprofile_reset_stats(void) cpu_buf->backtrace_aborted = 0; cpu_buf->sample_invalid_eip = 0; } - + atomic_set(&oprofile_stats.sample_lost_no_mm, 0); atomic_set(&oprofile_stats.sample_lost_no_mapping, 0); atomic_set(&oprofile_stats.event_lost_overflow, 0); } -void oprofile_create_stats_files(struct super_block * sb, struct dentry * root) +void oprofile_create_stats_files(struct super_block *sb, struct dentry *root) { - struct oprofile_cpu_buffer * cpu_buf; - struct dentry * cpudir; - struct dentry * dir; + struct oprofile_cpu_buffer *cpu_buf; + struct dentry *cpudir; + struct dentry *dir; char buf[10]; int i; @@ -52,7 +52,7 @@ void oprofile_create_stats_files(struct super_block * sb, struct dentry * root) cpu_buf = &per_cpu(cpu_buffer, i); snprintf(buf, 10, "cpu%d", i); cpudir = oprofilefs_mkdir(sb, dir, buf); - + /* Strictly speaking access to these ulongs is racy, * but we can't simply lock them, and they are * informational only. @@ -66,7 +66,7 @@ void oprofile_create_stats_files(struct super_block * sb, struct dentry * root) oprofilefs_create_ro_ulong(sb, cpudir, "sample_invalid_eip", &cpu_buf->sample_invalid_eip); } - + oprofilefs_create_ro_atomic(sb, dir, "sample_lost_no_mm", &oprofile_stats.sample_lost_no_mm); oprofilefs_create_ro_atomic(sb, dir, "sample_lost_no_mapping", diff --git a/drivers/oprofile/oprofile_stats.h b/drivers/oprofile/oprofile_stats.h index 6d755a633f15..3da0d08dc1f9 100644 --- a/drivers/oprofile/oprofile_stats.h +++ b/drivers/oprofile/oprofile_stats.h @@ -11,7 +11,7 @@ #define OPROFILE_STATS_H #include <asm/atomic.h> - + struct oprofile_stat_struct { atomic_t sample_lost_no_mm; atomic_t sample_lost_no_mapping; @@ -20,14 +20,14 @@ struct oprofile_stat_struct { }; extern struct oprofile_stat_struct oprofile_stats; - + /* reset all stats to zero */ void oprofile_reset_stats(void); - + struct super_block; struct dentry; - + /* create the stats/ dir */ -void oprofile_create_stats_files(struct super_block * sb, struct dentry * root); +void oprofile_create_stats_files(struct super_block *sb, struct dentry *root); #endif /* OPROFILE_STATS_H */ diff --git a/drivers/oprofile/oprofilefs.c b/drivers/oprofile/oprofilefs.c index 8543cb26cf34..ddc4c59f02dc 100644 --- a/drivers/oprofile/oprofilefs.c +++ b/drivers/oprofile/oprofilefs.c @@ -23,9 +23,9 @@ DEFINE_SPINLOCK(oprofilefs_lock); -static struct inode * oprofilefs_get_inode(struct super_block * sb, int mode) +static struct inode *oprofilefs_get_inode(struct super_block *sb, int mode) { - struct inode * inode = new_inode(sb); + struct inode *inode = new_inode(sb); if (inode) { inode->i_mode = mode; @@ -44,7 +44,7 @@ static struct super_operations s_ops = { }; -ssize_t oprofilefs_str_to_user(char const * str, char __user * buf, size_t count, loff_t * offset) +ssize_t oprofilefs_str_to_user(char const *str, char __user *buf, size_t count, loff_t *offset) { return simple_read_from_buffer(buf, count, offset, str, strlen(str)); } @@ -52,7 +52,7 @@ ssize_t oprofilefs_str_to_user(char const * str, char __user * buf, size_t count #define TMPBUFSIZE 50 -ssize_t oprofilefs_ulong_to_user(unsigned long val, char __user * buf, size_t count, loff_t * offset) +ssize_t oprofilefs_ulong_to_user(unsigned long val, char __user *buf, size_t count, loff_t *offset) { char tmpbuf[TMPBUFSIZE]; size_t maxlen = snprintf(tmpbuf, TMPBUFSIZE, "%lu\n", val); @@ -62,7 +62,7 @@ ssize_t oprofilefs_ulong_to_user(unsigned long val, char __user * buf, size_t co } -int oprofilefs_ulong_from_user(unsigned long * val, char const __user * buf, size_t count) +int oprofilefs_ulong_from_user(unsigned long *val, char const __user *buf, size_t count) { char tmpbuf[TMPBUFSIZE]; unsigned long flags; @@ -85,16 +85,16 @@ int oprofilefs_ulong_from_user(unsigned long * val, char const __user * buf, siz } -static ssize_t ulong_read_file(struct file * file, char __user * buf, size_t count, loff_t * offset) +static ssize_t ulong_read_file(struct file *file, char __user *buf, size_t count, loff_t *offset) { - unsigned long * val = file->private_data; + unsigned long *val = file->private_data; return oprofilefs_ulong_to_user(*val, buf, count, offset); } -static ssize_t ulong_write_file(struct file * file, char const __user * buf, size_t count, loff_t * offset) +static ssize_t ulong_write_file(struct file *file, char const __user *buf, size_t count, loff_t *offset) { - unsigned long * value = file->private_data; + unsigned long *value = file->private_data; int retval; if (*offset) @@ -108,7 +108,7 @@ static ssize_t ulong_write_file(struct file * file, char const __user * buf, siz } -static int default_open(struct inode * inode, struct file * filp) +static int default_open(struct inode *inode, struct file *filp) { if (inode->i_private) filp->private_data = inode->i_private; @@ -129,12 +129,12 @@ static const struct file_operations ulong_ro_fops = { }; -static struct dentry * __oprofilefs_create_file(struct super_block * sb, - struct dentry * root, char const * name, const struct file_operations * fops, +static struct dentry *__oprofilefs_create_file(struct super_block *sb, + struct dentry *root, char const *name, const struct file_operations *fops, int perm) { - struct dentry * dentry; - struct inode * inode; + struct dentry *dentry; + struct inode *inode; dentry = d_alloc_name(root, name); if (!dentry) @@ -150,10 +150,10 @@ static struct dentry * __oprofilefs_create_file(struct super_block * sb, } -int oprofilefs_create_ulong(struct super_block * sb, struct dentry * root, - char const * name, unsigned long * val) +int oprofilefs_create_ulong(struct super_block *sb, struct dentry *root, + char const *name, unsigned long *val) { - struct dentry * d = __oprofilefs_create_file(sb, root, name, + struct dentry *d = __oprofilefs_create_file(sb, root, name, &ulong_fops, 0644); if (!d) return -EFAULT; @@ -163,10 +163,10 @@ int oprofilefs_create_ulong(struct super_block * sb, struct dentry * root, } -int oprofilefs_create_ro_ulong(struct super_block * sb, struct dentry * root, - char const * name, unsigned long * val) +int oprofilefs_create_ro_ulong(struct super_block *sb, struct dentry *root, + char const *name, unsigned long *val) { - struct dentry * d = __oprofilefs_create_file(sb, root, name, + struct dentry *d = __oprofilefs_create_file(sb, root, name, &ulong_ro_fops, 0444); if (!d) return -EFAULT; @@ -176,23 +176,23 @@ int oprofilefs_create_ro_ulong(struct super_block * sb, struct dentry * root, } -static ssize_t atomic_read_file(struct file * file, char __user * buf, size_t count, loff_t * offset) +static ssize_t atomic_read_file(struct file *file, char __user *buf, size_t count, loff_t *offset) { - atomic_t * val = file->private_data; + atomic_t *val = file->private_data; return oprofilefs_ulong_to_user(atomic_read(val), buf, count, offset); } - + static const struct file_operations atomic_ro_fops = { .read = atomic_read_file, .open = default_open, }; - -int oprofilefs_create_ro_atomic(struct super_block * sb, struct dentry * root, - char const * name, atomic_t * val) + +int oprofilefs_create_ro_atomic(struct super_block *sb, struct dentry *root, + char const *name, atomic_t *val) { - struct dentry * d = __oprofilefs_create_file(sb, root, name, + struct dentry *d = __oprofilefs_create_file(sb, root, name, &atomic_ro_fops, 0444); if (!d) return -EFAULT; @@ -201,9 +201,9 @@ int oprofilefs_create_ro_atomic(struct super_block * sb, struct dentry * root, return 0; } - -int oprofilefs_create_file(struct super_block * sb, struct dentry * root, - char const * name, const struct file_operations * fops) + +int oprofilefs_create_file(struct super_block *sb, struct dentry *root, + char const *name, const struct file_operations *fops) { if (!__oprofilefs_create_file(sb, root, name, fops, 0644)) return -EFAULT; @@ -211,8 +211,8 @@ int oprofilefs_create_file(struct super_block * sb, struct dentry * root, } -int oprofilefs_create_file_perm(struct super_block * sb, struct dentry * root, - char const * name, const struct file_operations * fops, int perm) +int oprofilefs_create_file_perm(struct super_block *sb, struct dentry *root, + char const *name, const struct file_operations *fops, int perm) { if (!__oprofilefs_create_file(sb, root, name, fops, perm)) return -EFAULT; @@ -220,11 +220,11 @@ int oprofilefs_create_file_perm(struct super_block * sb, struct dentry * root, } -struct dentry * oprofilefs_mkdir(struct super_block * sb, - struct dentry * root, char const * name) +struct dentry *oprofilefs_mkdir(struct super_block *sb, + struct dentry *root, char const *name) { - struct dentry * dentry; - struct inode * inode; + struct dentry *dentry; + struct inode *inode; dentry = d_alloc_name(root, name); if (!dentry) @@ -241,10 +241,10 @@ struct dentry * oprofilefs_mkdir(struct super_block * sb, } -static int oprofilefs_fill_super(struct super_block * sb, void * data, int silent) +static int oprofilefs_fill_super(struct super_block *sb, void *data, int silent) { - struct inode * root_inode; - struct dentry * root_dentry; + struct inode *root_inode; + struct dentry *root_dentry; sb->s_blocksize = PAGE_CACHE_SIZE; sb->s_blocksize_bits = PAGE_CACHE_SHIFT; diff --git a/drivers/oprofile/timer_int.c b/drivers/oprofile/timer_int.c index 710a45f0d734..333f915568c7 100644 --- a/drivers/oprofile/timer_int.c +++ b/drivers/oprofile/timer_int.c @@ -19,7 +19,7 @@ static int timer_notify(struct pt_regs *regs) { - oprofile_add_sample(regs, 0); + oprofile_add_sample(regs, 0); return 0; } @@ -35,7 +35,7 @@ static void timer_stop(void) } -void __init oprofile_timer_init(struct oprofile_operations * ops) +void __init oprofile_timer_init(struct oprofile_operations *ops) { ops->create_files = NULL; ops->setup = NULL; diff --git a/drivers/parport/parport_pc.c b/drivers/parport/parport_pc.c index 8a846adf1dcf..96f3bdf0ec4b 100644 --- a/drivers/parport/parport_pc.c +++ b/drivers/parport/parport_pc.c @@ -2791,6 +2791,7 @@ enum parport_pc_pci_cards { oxsemi_952, oxsemi_954, oxsemi_840, + oxsemi_pcie_pport, aks_0100, mobility_pp, netmos_9705, @@ -2868,6 +2869,7 @@ static struct parport_pc_pci { /* oxsemi_952 */ { 1, { { 0, 1 }, } }, /* oxsemi_954 */ { 1, { { 0, -1 }, } }, /* oxsemi_840 */ { 1, { { 0, 1 }, } }, + /* oxsemi_pcie_pport */ { 1, { { 0, 1 }, } }, /* aks_0100 */ { 1, { { 0, -1 }, } }, /* mobility_pp */ { 1, { { 0, 1 }, } }, /* netmos_9705 */ { 1, { { 0, -1 }, } }, /* untested */ @@ -2928,7 +2930,6 @@ static const struct pci_device_id parport_pc_pci_tbl[] = { { 0x1409, 0x7268, 0x1409, 0x0103, 0, 0, timedia_4008a }, { 0x1409, 0x7268, 0x1409, 0x0104, 0, 0, timedia_4018 }, { 0x1409, 0x7268, 0x1409, 0x9018, 0, 0, timedia_9018a }, - { 0x14f2, 0x0121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, mobility_pp }, { PCI_VENDOR_ID_SYBA, PCI_DEVICE_ID_SYBA_2P_EPP, PCI_ANY_ID, PCI_ANY_ID, 0, 0, syba_2p_epp }, { PCI_VENDOR_ID_SYBA, PCI_DEVICE_ID_SYBA_1P_ECP, @@ -2946,8 +2947,25 @@ static const struct pci_device_id parport_pc_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_954 }, { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_12PCI840, PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_840 }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe840, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe840_G, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_0_G, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_1, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_1_G, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_1_U, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport }, + { PCI_VENDOR_ID_OXSEMI, PCI_DEVICE_ID_OXSEMI_PCIe952_1_GU, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, oxsemi_pcie_pport }, { PCI_VENDOR_ID_AKS, PCI_DEVICE_ID_AKS_ALADDINCARD, PCI_ANY_ID, PCI_ANY_ID, 0, 0, aks_0100 }, + { 0x14f2, 0x0121, PCI_ANY_ID, PCI_ANY_ID, 0, 0, mobility_pp }, /* NetMos communication controllers */ { PCI_VENDOR_ID_NETMOS, PCI_DEVICE_ID_NETMOS_9705, PCI_ANY_ID, PCI_ANY_ID, 0, 0, netmos_9705 }, diff --git a/drivers/pci/dmar.c b/drivers/pci/dmar.c index 8b29c307f1a1..691b3adeb870 100644 --- a/drivers/pci/dmar.c +++ b/drivers/pci/dmar.c @@ -188,8 +188,7 @@ dmar_parse_one_drhd(struct acpi_dmar_header *header) return 0; } -static int __init -dmar_parse_dev(struct dmar_drhd_unit *dmaru) +static int __init dmar_parse_dev(struct dmar_drhd_unit *dmaru) { struct acpi_dmar_hardware_unit *drhd; static int include_all; @@ -277,14 +276,15 @@ dmar_table_print_dmar_entry(struct acpi_dmar_header *header) drhd = (struct acpi_dmar_hardware_unit *)header; printk (KERN_INFO PREFIX "DRHD (flags: 0x%08x)base: 0x%016Lx\n", - drhd->flags, drhd->address); + drhd->flags, (unsigned long long)drhd->address); break; case ACPI_DMAR_TYPE_RESERVED_MEMORY: rmrr = (struct acpi_dmar_reserved_memory *)header; printk (KERN_INFO PREFIX "RMRR base: 0x%016Lx end: 0x%016Lx\n", - rmrr->base_address, rmrr->end_address); + (unsigned long long)rmrr->base_address, + (unsigned long long)rmrr->end_address); break; } } @@ -328,7 +328,7 @@ parse_dmar_table(void) if (!dmar) return -ENODEV; - if (dmar->width < PAGE_SHIFT_4K - 1) { + if (dmar->width < PAGE_SHIFT - 1) { printk(KERN_WARNING PREFIX "Invalid DMAR haw\n"); return -EINVAL; } @@ -460,8 +460,8 @@ void __init detect_intel_iommu(void) ret = dmar_table_detect(); -#ifdef CONFIG_DMAR { +#ifdef CONFIG_INTR_REMAP struct acpi_table_dmar *dmar; /* * for now we will disable dma-remapping when interrupt @@ -470,29 +470,17 @@ void __init detect_intel_iommu(void) * is added, we will not need this any more. */ dmar = (struct acpi_table_dmar *) dmar_tbl; - if (ret && cpu_has_x2apic && dmar->flags & 0x1) { + if (ret && cpu_has_x2apic && dmar->flags & 0x1) printk(KERN_INFO "Queued invalidation will be enabled to support " "x2apic and Intr-remapping.\n"); - printk(KERN_INFO - "Disabling IOMMU detection, because of missing " - "queued invalidation support for IOTLB " - "invalidation\n"); - printk(KERN_INFO - "Use \"nox2apic\", if you want to use Intel " - " IOMMU for DMA-remapping and don't care about " - " x2apic support\n"); - - dmar_disabled = 1; - goto end; - } - +#endif +#ifdef CONFIG_DMAR if (ret && !no_iommu && !iommu_detected && !swiotlb && !dmar_disabled) iommu_detected = 1; - } -end: #endif + } dmar_tbl = NULL; } @@ -510,7 +498,7 @@ int alloc_iommu(struct dmar_drhd_unit *drhd) iommu->seq_id = iommu_allocated++; - iommu->reg = ioremap(drhd->reg_base_addr, PAGE_SIZE_4K); + iommu->reg = ioremap(drhd->reg_base_addr, VTD_PAGE_SIZE); if (!iommu->reg) { printk(KERN_ERR "IOMMU: can't map the region\n"); goto error; @@ -521,8 +509,8 @@ int alloc_iommu(struct dmar_drhd_unit *drhd) /* the registers might be more than one page */ map_size = max_t(int, ecap_max_iotlb_offset(iommu->ecap), cap_max_fault_reg_offset(iommu->cap)); - map_size = PAGE_ALIGN_4K(map_size); - if (map_size > PAGE_SIZE_4K) { + map_size = VTD_PAGE_ALIGN(map_size); + if (map_size > VTD_PAGE_SIZE) { iounmap(iommu->reg); iommu->reg = ioremap(drhd->reg_base_addr, map_size); if (!iommu->reg) { @@ -533,8 +521,10 @@ int alloc_iommu(struct dmar_drhd_unit *drhd) ver = readl(iommu->reg + DMAR_VER_REG); pr_debug("IOMMU %llx: ver %d:%d cap %llx ecap %llx\n", - drhd->reg_base_addr, DMAR_VER_MAJOR(ver), DMAR_VER_MINOR(ver), - iommu->cap, iommu->ecap); + (unsigned long long)drhd->reg_base_addr, + DMAR_VER_MAJOR(ver), DMAR_VER_MINOR(ver), + (unsigned long long)iommu->cap, + (unsigned long long)iommu->ecap); spin_lock_init(&iommu->register_lock); @@ -587,11 +577,11 @@ void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu) hw = qi->desc; - spin_lock(&qi->q_lock); + spin_lock_irqsave(&qi->q_lock, flags); while (qi->free_cnt < 3) { - spin_unlock(&qi->q_lock); + spin_unlock_irqrestore(&qi->q_lock, flags); cpu_relax(); - spin_lock(&qi->q_lock); + spin_lock_irqsave(&qi->q_lock, flags); } index = qi->free_head; @@ -612,15 +602,22 @@ void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu) qi->free_head = (qi->free_head + 2) % QI_LENGTH; qi->free_cnt -= 2; - spin_lock_irqsave(&iommu->register_lock, flags); + spin_lock(&iommu->register_lock); /* * update the HW tail register indicating the presence of * new descriptors. */ writel(qi->free_head << 4, iommu->reg + DMAR_IQT_REG); - spin_unlock_irqrestore(&iommu->register_lock, flags); + spin_unlock(&iommu->register_lock); while (qi->desc_status[wait_index] != QI_DONE) { + /* + * We will leave the interrupts disabled, to prevent interrupt + * context to queue another cmd while a cmd is already submitted + * and waiting for completion on this cpu. This is to avoid + * a deadlock where the interrupt context can wait indefinitely + * for free slots in the queue. + */ spin_unlock(&qi->q_lock); cpu_relax(); spin_lock(&qi->q_lock); @@ -629,7 +626,7 @@ void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu) qi->desc_status[index] = QI_DONE; reclaim_free_desc(qi); - spin_unlock(&qi->q_lock); + spin_unlock_irqrestore(&qi->q_lock, flags); } /* @@ -645,6 +642,62 @@ void qi_global_iec(struct intel_iommu *iommu) qi_submit_sync(&desc, iommu); } +int qi_flush_context(struct intel_iommu *iommu, u16 did, u16 sid, u8 fm, + u64 type, int non_present_entry_flush) +{ + + struct qi_desc desc; + + if (non_present_entry_flush) { + if (!cap_caching_mode(iommu->cap)) + return 1; + else + did = 0; + } + + desc.low = QI_CC_FM(fm) | QI_CC_SID(sid) | QI_CC_DID(did) + | QI_CC_GRAN(type) | QI_CC_TYPE; + desc.high = 0; + + qi_submit_sync(&desc, iommu); + + return 0; + +} + +int qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr, + unsigned int size_order, u64 type, + int non_present_entry_flush) +{ + u8 dw = 0, dr = 0; + + struct qi_desc desc; + int ih = 0; + + if (non_present_entry_flush) { + if (!cap_caching_mode(iommu->cap)) + return 1; + else + did = 0; + } + + if (cap_write_drain(iommu->cap)) + dw = 1; + + if (cap_read_drain(iommu->cap)) + dr = 1; + + desc.low = QI_IOTLB_DID(did) | QI_IOTLB_DR(dr) | QI_IOTLB_DW(dw) + | QI_IOTLB_GRAN(type) | QI_IOTLB_TYPE; + desc.high = QI_IOTLB_ADDR(addr) | QI_IOTLB_IH(ih) + | QI_IOTLB_AM(size_order); + + qi_submit_sync(&desc, iommu); + + return 0; + +} + /* * Enable Queued Invalidation interface. This is a must to support * interrupt-remapping. Also used by DMA-remapping, which replaces diff --git a/drivers/pci/hotplug/acpiphp.h b/drivers/pci/hotplug/acpiphp.h index 5a58b075dd8d..f9e244da30ae 100644 --- a/drivers/pci/hotplug/acpiphp.h +++ b/drivers/pci/hotplug/acpiphp.h @@ -50,9 +50,6 @@ #define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ## arg) #define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME , ## arg) -/* name size which is used for entries in pcihpfs */ -#define SLOT_NAME_SIZE 20 /* {_SUN} */ - struct acpiphp_bridge; struct acpiphp_slot; @@ -63,9 +60,13 @@ struct slot { struct hotplug_slot *hotplug_slot; struct acpiphp_slot *acpi_slot; struct hotplug_slot_info info; - char name[SLOT_NAME_SIZE]; }; +static inline const char *slot_name(struct slot *slot) +{ + return hotplug_slot_name(slot->hotplug_slot); +} + /* * struct acpiphp_bridge - PCI bridge information * diff --git a/drivers/pci/hotplug/acpiphp_core.c b/drivers/pci/hotplug/acpiphp_core.c index 0e496e866a84..95b536a23d25 100644 --- a/drivers/pci/hotplug/acpiphp_core.c +++ b/drivers/pci/hotplug/acpiphp_core.c @@ -44,6 +44,9 @@ #define MY_NAME "acpiphp" +/* name size which is used for entries in pcihpfs */ +#define SLOT_NAME_SIZE 21 /* {_SUN} */ + static int debug; int acpiphp_debug; @@ -84,7 +87,6 @@ static struct hotplug_slot_ops acpi_hotplug_slot_ops = { .get_adapter_status = get_adapter_status, }; - /** * acpiphp_register_attention - set attention LED callback * @info: must be completely filled with LED callbacks @@ -136,7 +138,7 @@ static int enable_slot(struct hotplug_slot *hotplug_slot) { struct slot *slot = hotplug_slot->private; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); /* enable the specified slot */ return acpiphp_enable_slot(slot->acpi_slot); @@ -154,7 +156,7 @@ static int disable_slot(struct hotplug_slot *hotplug_slot) struct slot *slot = hotplug_slot->private; int retval; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); /* disable the specified slot */ retval = acpiphp_disable_slot(slot->acpi_slot); @@ -177,7 +179,7 @@ static int disable_slot(struct hotplug_slot *hotplug_slot) { int retval = -ENODEV; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, hotplug_slot_name(hotplug_slot)); if (attention_info && try_module_get(attention_info->owner)) { retval = attention_info->set_attn(hotplug_slot, status); @@ -200,7 +202,7 @@ static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value) { struct slot *slot = hotplug_slot->private; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); *value = acpiphp_get_power_status(slot->acpi_slot); @@ -222,7 +224,7 @@ static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value) { int retval = -EINVAL; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, hotplug_slot_name(hotplug_slot)); if (attention_info && try_module_get(attention_info->owner)) { retval = attention_info->get_attn(hotplug_slot, value); @@ -245,7 +247,7 @@ static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value) { struct slot *slot = hotplug_slot->private; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); *value = acpiphp_get_latch_status(slot->acpi_slot); @@ -265,7 +267,7 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) { struct slot *slot = hotplug_slot->private; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); *value = acpiphp_get_adapter_status(slot->acpi_slot); @@ -299,7 +301,7 @@ static void release_slot(struct hotplug_slot *hotplug_slot) { struct slot *slot = hotplug_slot->private; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); kfree(slot->hotplug_slot); kfree(slot); @@ -310,6 +312,7 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot) { struct slot *slot; int retval = -ENOMEM; + char name[SLOT_NAME_SIZE]; slot = kzalloc(sizeof(*slot), GFP_KERNEL); if (!slot) @@ -321,8 +324,6 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot) slot->hotplug_slot->info = &slot->info; - slot->hotplug_slot->name = slot->name; - slot->hotplug_slot->private = slot; slot->hotplug_slot->release = &release_slot; slot->hotplug_slot->ops = &acpi_hotplug_slot_ops; @@ -336,11 +337,12 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot) slot->hotplug_slot->info->cur_bus_speed = PCI_SPEED_UNKNOWN; acpiphp_slot->slot = slot; - snprintf(slot->name, sizeof(slot->name), "%u", slot->acpi_slot->sun); + snprintf(name, SLOT_NAME_SIZE, "%u", slot->acpi_slot->sun); retval = pci_hp_register(slot->hotplug_slot, acpiphp_slot->bridge->pci_bus, - acpiphp_slot->device); + acpiphp_slot->device, + name); if (retval == -EBUSY) goto error_hpslot; if (retval) { @@ -348,7 +350,7 @@ int acpiphp_register_hotplug_slot(struct acpiphp_slot *acpiphp_slot) goto error_hpslot; } - info("Slot [%s] registered\n", slot->hotplug_slot->name); + info("Slot [%s] registered\n", slot_name(slot)); return 0; error_hpslot: @@ -365,7 +367,7 @@ void acpiphp_unregister_hotplug_slot(struct acpiphp_slot *acpiphp_slot) struct slot *slot = acpiphp_slot->slot; int retval = 0; - info ("Slot [%s] unregistered\n", slot->hotplug_slot->name); + info("Slot [%s] unregistered\n", slot_name(slot)); retval = pci_hp_deregister(slot->hotplug_slot); if (retval) diff --git a/drivers/pci/hotplug/cpci_hotplug.h b/drivers/pci/hotplug/cpci_hotplug.h index d9769b30be9a..9fff878cf026 100644 --- a/drivers/pci/hotplug/cpci_hotplug.h +++ b/drivers/pci/hotplug/cpci_hotplug.h @@ -30,6 +30,7 @@ #include <linux/types.h> #include <linux/pci.h> +#include <linux/pci_hotplug.h> /* PICMG 2.1 R2.0 HS CSR bits: */ #define HS_CSR_INS 0x0080 @@ -69,6 +70,11 @@ struct cpci_hp_controller { struct cpci_hp_controller_ops *ops; }; +static inline const char *slot_name(struct slot *slot) +{ + return hotplug_slot_name(slot->hotplug_slot); +} + extern int cpci_hp_register_controller(struct cpci_hp_controller *controller); extern int cpci_hp_unregister_controller(struct cpci_hp_controller *controller); extern int cpci_hp_register_bus(struct pci_bus *bus, u8 first, u8 last); diff --git a/drivers/pci/hotplug/cpci_hotplug_core.c b/drivers/pci/hotplug/cpci_hotplug_core.c index 935947991dc9..de94f4feef8c 100644 --- a/drivers/pci/hotplug/cpci_hotplug_core.c +++ b/drivers/pci/hotplug/cpci_hotplug_core.c @@ -108,7 +108,7 @@ enable_slot(struct hotplug_slot *hotplug_slot) struct slot *slot = hotplug_slot->private; int retval = 0; - dbg("%s - physical_slot = %s", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s", __func__, slot_name(slot)); if (controller->ops->set_power) retval = controller->ops->set_power(slot, 1); @@ -121,25 +121,23 @@ disable_slot(struct hotplug_slot *hotplug_slot) struct slot *slot = hotplug_slot->private; int retval = 0; - dbg("%s - physical_slot = %s", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s", __func__, slot_name(slot)); down_write(&list_rwsem); /* Unconfigure device */ - dbg("%s - unconfiguring slot %s", - __func__, slot->hotplug_slot->name); + dbg("%s - unconfiguring slot %s", __func__, slot_name(slot)); if ((retval = cpci_unconfigure_slot(slot))) { err("%s - could not unconfigure slot %s", - __func__, slot->hotplug_slot->name); + __func__, slot_name(slot)); goto disable_error; } - dbg("%s - finished unconfiguring slot %s", - __func__, slot->hotplug_slot->name); + dbg("%s - finished unconfiguring slot %s", __func__, slot_name(slot)); /* Clear EXT (by setting it) */ if (cpci_clear_ext(slot)) { err("%s - could not clear EXT for slot %s", - __func__, slot->hotplug_slot->name); + __func__, slot_name(slot)); retval = -ENODEV; goto disable_error; } @@ -214,7 +212,6 @@ static void release_slot(struct hotplug_slot *hotplug_slot) struct slot *slot = hotplug_slot->private; kfree(slot->hotplug_slot->info); - kfree(slot->hotplug_slot->name); kfree(slot->hotplug_slot); if (slot->dev) pci_dev_put(slot->dev); @@ -222,12 +219,6 @@ static void release_slot(struct hotplug_slot *hotplug_slot) } #define SLOT_NAME_SIZE 6 -static void -make_slot_name(struct slot *slot) -{ - snprintf(slot->hotplug_slot->name, - SLOT_NAME_SIZE, "%02x:%02x", slot->bus->number, slot->number); -} int cpci_hp_register_bus(struct pci_bus *bus, u8 first, u8 last) @@ -235,7 +226,7 @@ cpci_hp_register_bus(struct pci_bus *bus, u8 first, u8 last) struct slot *slot; struct hotplug_slot *hotplug_slot; struct hotplug_slot_info *info; - char *name; + char name[SLOT_NAME_SIZE]; int status = -ENOMEM; int i; @@ -262,34 +253,31 @@ cpci_hp_register_bus(struct pci_bus *bus, u8 first, u8 last) goto error_hpslot; hotplug_slot->info = info; - name = kmalloc(SLOT_NAME_SIZE, GFP_KERNEL); - if (!name) - goto error_info; - hotplug_slot->name = name; - slot->bus = bus; slot->number = i; slot->devfn = PCI_DEVFN(i, 0); + snprintf(name, SLOT_NAME_SIZE, "%02x:%02x", bus->number, i); + hotplug_slot->private = slot; hotplug_slot->release = &release_slot; - make_slot_name(slot); hotplug_slot->ops = &cpci_hotplug_slot_ops; /* * Initialize the slot info structure with some known * good values. */ - dbg("initializing slot %s", slot->hotplug_slot->name); + dbg("initializing slot %s", name); info->power_status = cpci_get_power_status(slot); info->attention_status = cpci_get_attention_status(slot); - dbg("registering slot %s", slot->hotplug_slot->name); - status = pci_hp_register(slot->hotplug_slot, bus, i); + dbg("registering slot %s", name); + status = pci_hp_register(slot->hotplug_slot, bus, i, name); if (status) { err("pci_hp_register failed with error %d", status); - goto error_name; + goto error_info; } + dbg("slot registered with name: %s", slot_name(slot)); /* Add slot to our internal list */ down_write(&list_rwsem); @@ -298,8 +286,6 @@ cpci_hp_register_bus(struct pci_bus *bus, u8 first, u8 last) up_write(&list_rwsem); } return 0; -error_name: - kfree(name); error_info: kfree(info); error_hpslot: @@ -327,7 +313,7 @@ cpci_hp_unregister_bus(struct pci_bus *bus) list_del(&slot->slot_list); slots--; - dbg("deregistering slot %s", slot->hotplug_slot->name); + dbg("deregistering slot %s", slot_name(slot)); status = pci_hp_deregister(slot->hotplug_slot); if (status) { err("pci_hp_deregister failed with error %d", @@ -379,11 +365,10 @@ init_slots(int clear_ins) return -1; } list_for_each_entry(slot, &slot_list, slot_list) { - dbg("%s - looking at slot %s", - __func__, slot->hotplug_slot->name); + dbg("%s - looking at slot %s", __func__, slot_name(slot)); if (clear_ins && cpci_check_and_clear_ins(slot)) dbg("%s - cleared INS for slot %s", - __func__, slot->hotplug_slot->name); + __func__, slot_name(slot)); dev = pci_get_slot(slot->bus, PCI_DEVFN(slot->number, 0)); if (dev) { if (update_adapter_status(slot->hotplug_slot, 1)) @@ -414,8 +399,7 @@ check_slots(void) } extracted = inserted = 0; list_for_each_entry(slot, &slot_list, slot_list) { - dbg("%s - looking at slot %s", - __func__, slot->hotplug_slot->name); + dbg("%s - looking at slot %s", __func__, slot_name(slot)); if (cpci_check_and_clear_ins(slot)) { /* * Some broken hardware (e.g. PLX 9054AB) asserts @@ -423,35 +407,34 @@ check_slots(void) */ if (slot->dev) { warn("slot %s already inserted", - slot->hotplug_slot->name); + slot_name(slot)); inserted++; continue; } /* Process insertion */ - dbg("%s - slot %s inserted", - __func__, slot->hotplug_slot->name); + dbg("%s - slot %s inserted", __func__, slot_name(slot)); /* GSM, debug */ hs_csr = cpci_get_hs_csr(slot); dbg("%s - slot %s HS_CSR (1) = %04x", - __func__, slot->hotplug_slot->name, hs_csr); + __func__, slot_name(slot), hs_csr); /* Configure device */ dbg("%s - configuring slot %s", - __func__, slot->hotplug_slot->name); + __func__, slot_name(slot)); if (cpci_configure_slot(slot)) { err("%s - could not configure slot %s", - __func__, slot->hotplug_slot->name); + __func__, slot_name(slot)); continue; } dbg("%s - finished configuring slot %s", - __func__, slot->hotplug_slot->name); + __func__, slot_name(slot)); /* GSM, debug */ hs_csr = cpci_get_hs_csr(slot); dbg("%s - slot %s HS_CSR (2) = %04x", - __func__, slot->hotplug_slot->name, hs_csr); + __func__, slot_name(slot), hs_csr); if (update_latch_status(slot->hotplug_slot, 1)) warn("failure to update latch file"); @@ -464,18 +447,18 @@ check_slots(void) /* GSM, debug */ hs_csr = cpci_get_hs_csr(slot); dbg("%s - slot %s HS_CSR (3) = %04x", - __func__, slot->hotplug_slot->name, hs_csr); + __func__, slot_name(slot), hs_csr); inserted++; } else if (cpci_check_ext(slot)) { /* Process extraction request */ dbg("%s - slot %s extracted", - __func__, slot->hotplug_slot->name); + __func__, slot_name(slot)); /* GSM, debug */ hs_csr = cpci_get_hs_csr(slot); dbg("%s - slot %s HS_CSR = %04x", - __func__, slot->hotplug_slot->name, hs_csr); + __func__, slot_name(slot), hs_csr); if (!slot->extracting) { if (update_latch_status(slot->hotplug_slot, 0)) { @@ -493,7 +476,7 @@ check_slots(void) * bother trying to tell the driver or not? */ err("card in slot %s was improperly removed", - slot->hotplug_slot->name); + slot_name(slot)); if (update_adapter_status(slot->hotplug_slot, 0)) warn("failure to update adapter file"); slot->extracting = 0; diff --git a/drivers/pci/hotplug/cpci_hotplug_pci.c b/drivers/pci/hotplug/cpci_hotplug_pci.c index df82b95e2874..829c327cfb5e 100644 --- a/drivers/pci/hotplug/cpci_hotplug_pci.c +++ b/drivers/pci/hotplug/cpci_hotplug_pci.c @@ -209,7 +209,7 @@ int cpci_led_on(struct slot* slot) hs_cap + 2, hs_csr)) { err("Could not set LOO for slot %s", - slot->hotplug_slot->name); + hotplug_slot_name(slot->hotplug_slot)); return -ENODEV; } } @@ -238,7 +238,7 @@ int cpci_led_off(struct slot* slot) hs_cap + 2, hs_csr)) { err("Could not clear LOO for slot %s", - slot->hotplug_slot->name); + hotplug_slot_name(slot->hotplug_slot)); return -ENODEV; } } diff --git a/drivers/pci/hotplug/cpqphp.h b/drivers/pci/hotplug/cpqphp.h index b1decfa88b7a..afaf8f69f73e 100644 --- a/drivers/pci/hotplug/cpqphp.h +++ b/drivers/pci/hotplug/cpqphp.h @@ -449,6 +449,11 @@ extern u8 cpqhp_disk_irq; /* inline functions */ +static inline char *slot_name(struct slot *slot) +{ + return hotplug_slot_name(slot->hotplug_slot); +} + /* * return_resource * @@ -696,14 +701,6 @@ static inline int get_presence_status(struct controller *ctrl, struct slot *slot return presence_save; } -#define SLOT_NAME_SIZE 10 - -static inline void make_slot_name(char *buffer, int buffer_size, struct slot *slot) -{ - snprintf(buffer, buffer_size, "%d", slot->number); -} - - static inline int wait_for_ctrl_irq(struct controller *ctrl) { DECLARE_WAITQUEUE(wait, current); diff --git a/drivers/pci/hotplug/cpqphp_core.c b/drivers/pci/hotplug/cpqphp_core.c index 54defec51d08..724d42c4adbc 100644 --- a/drivers/pci/hotplug/cpqphp_core.c +++ b/drivers/pci/hotplug/cpqphp_core.c @@ -315,14 +315,15 @@ static void release_slot(struct hotplug_slot *hotplug_slot) { struct slot *slot = hotplug_slot->private; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); kfree(slot->hotplug_slot->info); - kfree(slot->hotplug_slot->name); kfree(slot->hotplug_slot); kfree(slot); } +#define SLOT_NAME_SIZE 10 + static int ctrl_slot_setup(struct controller *ctrl, void __iomem *smbios_start, void __iomem *smbios_table) @@ -335,6 +336,7 @@ static int ctrl_slot_setup(struct controller *ctrl, u8 slot_number; u8 ctrl_slot; u32 tempdword; + char name[SLOT_NAME_SIZE]; void __iomem *slot_entry= NULL; int result = -ENOMEM; @@ -363,16 +365,12 @@ static int ctrl_slot_setup(struct controller *ctrl, if (!hotplug_slot->info) goto error_hpslot; hotplug_slot_info = hotplug_slot->info; - hotplug_slot->name = kmalloc(SLOT_NAME_SIZE, GFP_KERNEL); - - if (!hotplug_slot->name) - goto error_info; slot->ctrl = ctrl; slot->bus = ctrl->bus; slot->device = slot_device; slot->number = slot_number; - dbg("slot->number = %d\n", slot->number); + dbg("slot->number = %u\n", slot->number); slot_entry = get_SMBIOS_entry(smbios_start, smbios_table, 9, slot_entry); @@ -418,9 +416,9 @@ static int ctrl_slot_setup(struct controller *ctrl, /* register this slot with the hotplug pci core */ hotplug_slot->release = &release_slot; hotplug_slot->private = slot; - make_slot_name(hotplug_slot->name, SLOT_NAME_SIZE, slot); + snprintf(name, SLOT_NAME_SIZE, "%u", slot->number); hotplug_slot->ops = &cpqphp_hotplug_slot_ops; - + hotplug_slot_info->power_status = get_slot_enabled(ctrl, slot); hotplug_slot_info->attention_status = cpq_get_attention_status(ctrl, slot); @@ -436,10 +434,11 @@ static int ctrl_slot_setup(struct controller *ctrl, slot_number); result = pci_hp_register(hotplug_slot, ctrl->pci_dev->subordinate, - slot->device); + slot->device, + name); if (result) { err("pci_hp_register failed with error %d\n", result); - goto error_name; + goto error_info; } slot->next = ctrl->slot; @@ -451,8 +450,6 @@ static int ctrl_slot_setup(struct controller *ctrl, } return 0; -error_name: - kfree(hotplug_slot->name); error_info: kfree(hotplug_slot_info); error_hpslot: @@ -638,7 +635,7 @@ static int set_attention_status (struct hotplug_slot *hotplug_slot, u8 status) u8 device; u8 function; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1) return -ENODEV; @@ -665,7 +662,7 @@ static int process_SI(struct hotplug_slot *hotplug_slot) u8 device; u8 function; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1) return -ENODEV; @@ -697,7 +694,7 @@ static int process_SS(struct hotplug_slot *hotplug_slot) u8 device; u8 function; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1) return -ENODEV; @@ -720,7 +717,7 @@ static int hardware_test(struct hotplug_slot *hotplug_slot, u32 value) struct slot *slot = hotplug_slot->private; struct controller *ctrl = slot->ctrl; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); return cpqhp_hardware_test(ctrl, value); } @@ -731,7 +728,7 @@ static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value) struct slot *slot = hotplug_slot->private; struct controller *ctrl = slot->ctrl; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); *value = get_slot_enabled(ctrl, slot); return 0; @@ -742,7 +739,7 @@ static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value) struct slot *slot = hotplug_slot->private; struct controller *ctrl = slot->ctrl; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); *value = cpq_get_attention_status(ctrl, slot); return 0; @@ -753,7 +750,7 @@ static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value) struct slot *slot = hotplug_slot->private; struct controller *ctrl = slot->ctrl; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); *value = cpq_get_latch_status(ctrl, slot); @@ -765,7 +762,7 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) struct slot *slot = hotplug_slot->private; struct controller *ctrl = slot->ctrl; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); *value = get_presence_status(ctrl, slot); @@ -777,7 +774,7 @@ static int get_max_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_sp struct slot *slot = hotplug_slot->private; struct controller *ctrl = slot->ctrl; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); *value = ctrl->speed_capability; @@ -789,7 +786,7 @@ static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_sp struct slot *slot = hotplug_slot->private; struct controller *ctrl = slot->ctrl; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); *value = ctrl->speed; diff --git a/drivers/pci/hotplug/cpqphp_ctrl.c b/drivers/pci/hotplug/cpqphp_ctrl.c index ef041ca91c27..a60a25290995 100644 --- a/drivers/pci/hotplug/cpqphp_ctrl.c +++ b/drivers/pci/hotplug/cpqphp_ctrl.c @@ -1139,7 +1139,7 @@ static u8 set_controller_speed(struct controller *ctrl, u8 adapter_speed, u8 hp_ for(slot = ctrl->slot; slot; slot = slot->next) { if (slot->device == (hp_slot + ctrl->slot_device_offset)) continue; - if (!slot->hotplug_slot && !slot->hotplug_slot->info) + if (!slot->hotplug_slot || !slot->hotplug_slot->info) continue; if (slot->hotplug_slot->info->adapter_status == 0) continue; diff --git a/drivers/pci/hotplug/fakephp.c b/drivers/pci/hotplug/fakephp.c index 146ca9cd1567..3a2637a00934 100644 --- a/drivers/pci/hotplug/fakephp.c +++ b/drivers/pci/hotplug/fakephp.c @@ -66,10 +66,10 @@ struct dummy_slot { struct pci_dev *dev; struct work_struct remove_work; unsigned long removed; - char name[8]; }; static int debug; +static int dup_slots; static LIST_HEAD(slot_list); static struct workqueue_struct *dummyphp_wq; @@ -96,10 +96,13 @@ static void dummy_release(struct hotplug_slot *slot) kfree(dslot); } +#define SLOT_NAME_SIZE 8 + static int add_slot(struct pci_dev *dev) { struct dummy_slot *dslot; struct hotplug_slot *slot; + char name[SLOT_NAME_SIZE]; int retval = -ENOMEM; static int count = 1; @@ -119,19 +122,22 @@ static int add_slot(struct pci_dev *dev) if (!dslot) goto error_info; - slot->name = dslot->name; - snprintf(slot->name, sizeof(dslot->name), "fake%d", count++); - dbg("slot->name = %s\n", slot->name); + if (dup_slots) + snprintf(name, SLOT_NAME_SIZE, "fake"); + else + snprintf(name, SLOT_NAME_SIZE, "fake%d", count++); + dbg("slot->name = %s\n", name); slot->ops = &dummy_hotplug_slot_ops; slot->release = &dummy_release; slot->private = dslot; - retval = pci_hp_register(slot, dev->bus, PCI_SLOT(dev->devfn)); + retval = pci_hp_register(slot, dev->bus, PCI_SLOT(dev->devfn), name); if (retval) { err("pci_hp_register failed with error %d\n", retval); goto error_dslot; } + dbg("slot->name = %s\n", hotplug_slot_name(slot)); dslot->slot = slot; dslot->dev = pci_dev_get(dev); list_add (&dslot->node, &slot_list); @@ -167,10 +173,11 @@ static void remove_slot(struct dummy_slot *dslot) { int retval; - dbg("removing slot %s\n", dslot->slot->name); + dbg("removing slot %s\n", hotplug_slot_name(dslot->slot)); retval = pci_hp_deregister(dslot->slot); if (retval) - err("Problem unregistering a slot %s\n", dslot->slot->name); + err("Problem unregistering a slot %s\n", + hotplug_slot_name(dslot->slot)); } /* called from the single-threaded workqueue handler to remove a slot */ @@ -308,7 +315,7 @@ static int disable_slot(struct hotplug_slot *slot) return -ENODEV; dslot = slot->private; - dbg("%s - physical_slot = %s\n", __func__, slot->name); + dbg("%s - physical_slot = %s\n", __func__, hotplug_slot_name(slot)); for (func = 7; func >= 0; func--) { dev = pci_get_slot(dslot->dev->bus, dslot->dev->devfn + func); @@ -373,4 +380,5 @@ MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); module_param(debug, bool, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debugging mode enabled or not"); - +module_param(dup_slots, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(dup_slots, "Force duplicate slot names for debugging"); diff --git a/drivers/pci/hotplug/ibmphp.h b/drivers/pci/hotplug/ibmphp.h index 612d96301509..a8d391a4957d 100644 --- a/drivers/pci/hotplug/ibmphp.h +++ b/drivers/pci/hotplug/ibmphp.h @@ -707,17 +707,16 @@ struct slot { u8 device; u8 number; u8 real_physical_slot_num; - char name[100]; u32 capabilities; u8 supported_speed; u8 supported_bus_mode; + u8 flag; /* this is for disable slot and polling */ + u8 ctlr_index; struct hotplug_slot *hotplug_slot; struct controller *ctrl; struct pci_func *func; u8 irq[4]; - u8 flag; /* this is for disable slot and polling */ int bit_mode; /* 0 = 32, 1 = 64 */ - u8 ctlr_index; struct bus_info *bus_on; struct list_head ibm_slot_list; u8 status; diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c index 8cfd1c4926c8..c1abac8ab5c3 100644 --- a/drivers/pci/hotplug/ibmphp_ebda.c +++ b/drivers/pci/hotplug/ibmphp_ebda.c @@ -587,11 +587,14 @@ static u8 calculate_first_slot (u8 slot_num) return first_slot + 1; } + +#define SLOT_NAME_SIZE 30 + static char *create_file_name (struct slot * slot_cur) { struct opt_rio *opt_vg_ptr = NULL; struct opt_rio_lo *opt_lo_ptr = NULL; - static char str[30]; + static char str[SLOT_NAME_SIZE]; int which = 0; /* rxe = 1, chassis = 0 */ u8 number = 1; /* either chassis or rxe # */ u8 first_slot = 1; @@ -703,7 +706,6 @@ static void release_slot(struct hotplug_slot *hotplug_slot) slot = hotplug_slot->private; kfree(slot->hotplug_slot->info); - kfree(slot->hotplug_slot->name); kfree(slot->hotplug_slot); slot->ctrl = NULL; slot->bus_on = NULL; @@ -734,6 +736,7 @@ static int __init ebda_rsrc_controller (void) struct bus_info *bus_info_ptr1, *bus_info_ptr2; int rc; struct slot *tmp_slot; + char name[SLOT_NAME_SIZE]; addr = hpc_list_ptr->phys_addr; for (ctlr = 0; ctlr < hpc_list_ptr->num_ctlrs; ctlr++) { @@ -897,12 +900,6 @@ static int __init ebda_rsrc_controller (void) goto error_no_hp_info; } - hp_slot_ptr->name = kmalloc(30, GFP_KERNEL); - if (!hp_slot_ptr->name) { - rc = -ENOMEM; - goto error_no_hp_name; - } - tmp_slot = kzalloc(sizeof(*tmp_slot), GFP_KERNEL); if (!tmp_slot) { rc = -ENOMEM; @@ -964,9 +961,9 @@ static int __init ebda_rsrc_controller (void) } /* each hpc */ list_for_each_entry(tmp_slot, &ibmphp_slot_head, ibm_slot_list) { - snprintf (tmp_slot->hotplug_slot->name, 30, "%s", create_file_name (tmp_slot)); + snprintf(name, SLOT_NAME_SIZE, "%s", create_file_name(tmp_slot)); pci_hp_register(tmp_slot->hotplug_slot, - pci_find_bus(0, tmp_slot->bus), tmp_slot->device); + pci_find_bus(0, tmp_slot->bus), tmp_slot->device, name); } print_ebda_hpc (); @@ -976,8 +973,6 @@ static int __init ebda_rsrc_controller (void) error: kfree (hp_slot_ptr->private); error_no_slot: - kfree (hp_slot_ptr->name); -error_no_hp_name: kfree (hp_slot_ptr->info); error_no_hp_info: kfree (hp_slot_ptr); diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 2e6c4474644e..535fce0f07f9 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -37,6 +37,7 @@ #include <linux/init.h> #include <linux/mount.h> #include <linux/namei.h> +#include <linux/mutex.h> #include <linux/pci.h> #include <linux/pci_hotplug.h> #include <asm/uaccess.h> @@ -61,7 +62,7 @@ static int debug; ////////////////////////////////////////////////////////////////// static LIST_HEAD(pci_hotplug_slot_list); -static DEFINE_SPINLOCK(pci_hotplug_slot_list_lock); +static DEFINE_MUTEX(pci_hp_mutex); /* these strings match up with the values in pci_bus_speed */ static char *pci_bus_speed_strings[] = { @@ -530,16 +531,12 @@ static struct hotplug_slot *get_slot_from_name (const char *name) struct hotplug_slot *slot; struct list_head *tmp; - spin_lock(&pci_hotplug_slot_list_lock); list_for_each (tmp, &pci_hotplug_slot_list) { slot = list_entry (tmp, struct hotplug_slot, slot_list); - if (strcmp(slot->name, name) == 0) - goto out; + if (strcmp(hotplug_slot_name(slot), name) == 0) + return slot; } - slot = NULL; -out: - spin_unlock(&pci_hotplug_slot_list_lock); - return slot; + return NULL; } /** @@ -547,13 +544,15 @@ out: * @bus: bus this slot is on * @slot: pointer to the &struct hotplug_slot to register * @slot_nr: slot number + * @name: name registered with kobject core * * Registers a hotplug slot with the pci hotplug subsystem, which will allow * userspace interaction to the slot. * * Returns 0 if successful, anything else for an error. */ -int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr) +int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr, + const char *name) { int result; struct pci_slot *pci_slot; @@ -568,48 +567,29 @@ int pci_hp_register(struct hotplug_slot *slot, struct pci_bus *bus, int slot_nr) return -EINVAL; } - /* Check if we have already registered a slot with the same name. */ - if (get_slot_from_name(slot->name)) - return -EEXIST; + mutex_lock(&pci_hp_mutex); /* * No problems if we call this interface from both ACPI_PCI_SLOT * driver and call it here again. If we've already created the * pci_slot, the interface will simply bump the refcount. */ - pci_slot = pci_create_slot(bus, slot_nr, slot->name); - if (IS_ERR(pci_slot)) - return PTR_ERR(pci_slot); - - if (pci_slot->hotplug) { - dbg("%s: already claimed\n", __func__); - pci_destroy_slot(pci_slot); - return -EBUSY; + pci_slot = pci_create_slot(bus, slot_nr, name, slot); + if (IS_ERR(pci_slot)) { + result = PTR_ERR(pci_slot); + goto out; } slot->pci_slot = pci_slot; pci_slot->hotplug = slot; - /* - * Allow pcihp drivers to override the ACPI_PCI_SLOT name. - */ - if (strcmp(kobject_name(&pci_slot->kobj), slot->name)) { - result = kobject_rename(&pci_slot->kobj, slot->name); - if (result) { - pci_destroy_slot(pci_slot); - return result; - } - } - - spin_lock(&pci_hotplug_slot_list_lock); list_add(&slot->slot_list, &pci_hotplug_slot_list); - spin_unlock(&pci_hotplug_slot_list_lock); result = fs_add_slot(pci_slot); kobject_uevent(&pci_slot->kobj, KOBJ_ADD); - dbg("Added slot %s to the list\n", slot->name); - - + dbg("Added slot %s to the list\n", name); +out: + mutex_unlock(&pci_hp_mutex); return result; } @@ -630,21 +610,23 @@ int pci_hp_deregister(struct hotplug_slot *hotplug) if (!hotplug) return -ENODEV; - temp = get_slot_from_name(hotplug->name); - if (temp != hotplug) + mutex_lock(&pci_hp_mutex); + temp = get_slot_from_name(hotplug_slot_name(hotplug)); + if (temp != hotplug) { + mutex_unlock(&pci_hp_mutex); return -ENODEV; + } - spin_lock(&pci_hotplug_slot_list_lock); list_del(&hotplug->slot_list); - spin_unlock(&pci_hotplug_slot_list_lock); slot = hotplug->pci_slot; fs_remove_slot(slot); - dbg("Removed slot %s from the list\n", hotplug->name); + dbg("Removed slot %s from the list\n", hotplug_slot_name(hotplug)); hotplug->release(hotplug); slot->hotplug = NULL; pci_destroy_slot(slot); + mutex_unlock(&pci_hp_mutex); return 0; } diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index c367978bd7fe..a4817a841fae 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -74,15 +74,13 @@ extern struct workqueue_struct *pciehp_wq; struct slot { u8 bus; u8 device; - u32 number; u8 state; - struct timer_list task_event; u8 hp_slot; + u32 number; struct controller *ctrl; struct hpc_ops *hpc_ops; struct hotplug_slot *hotplug_slot; struct list_head slot_list; - char name[SLOT_NAME_SIZE]; unsigned long last_emi_toggle; struct delayed_work work; /* work for button event */ struct mutex lock; @@ -112,6 +110,7 @@ struct controller { struct timer_list poll_timer; int cmd_busy; unsigned int no_cmd_complete:1; + unsigned int link_active_reporting:1; }; #define INT_BUTTON_IGNORE 0 @@ -175,6 +174,11 @@ int pciehp_enable_slot(struct slot *p_slot); int pciehp_disable_slot(struct slot *p_slot); int pcie_enable_notification(struct controller *ctrl); +static inline const char *slot_name(struct slot *slot) +{ + return hotplug_slot_name(slot->hotplug_slot); +} + static inline struct slot *pciehp_find_slot(struct controller *ctrl, u8 device) { struct slot *slot; diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index c748a19db89d..62be1b59c74b 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -185,7 +185,7 @@ static void release_slot(struct hotplug_slot *hotplug_slot) struct slot *slot = hotplug_slot->private; ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", - __func__, hotplug_slot->name); + __func__, hotplug_slot_name(hotplug_slot)); kfree(hotplug_slot->info); kfree(hotplug_slot); @@ -196,7 +196,7 @@ static int init_slots(struct controller *ctrl) struct slot *slot; struct hotplug_slot *hotplug_slot; struct hotplug_slot_info *info; - int len, dup = 1; + char name[SLOT_NAME_SIZE]; int retval = -ENOMEM; list_for_each_entry(slot, &ctrl->slot_list, slot_list) { @@ -210,41 +210,28 @@ static int init_slots(struct controller *ctrl) /* register this slot with the hotplug pci core */ hotplug_slot->info = info; - hotplug_slot->name = slot->name; hotplug_slot->private = slot; hotplug_slot->release = &release_slot; hotplug_slot->ops = &pciehp_hotplug_slot_ops; - get_power_status(hotplug_slot, &info->power_status); - get_attention_status(hotplug_slot, &info->attention_status); - get_latch_status(hotplug_slot, &info->latch_status); - get_adapter_status(hotplug_slot, &info->adapter_status); slot->hotplug_slot = hotplug_slot; + snprintf(name, SLOT_NAME_SIZE, "%u", slot->number); ctrl_dbg(ctrl, "Registering bus=%x dev=%x hp_slot=%x sun=%x " "slot_device_offset=%x\n", slot->bus, slot->device, slot->hp_slot, slot->number, ctrl->slot_device_offset); -duplicate_name: retval = pci_hp_register(hotplug_slot, ctrl->pci_dev->subordinate, - slot->device); + slot->device, + name); if (retval) { - /* - * If slot N already exists, we'll try to create - * slot N-1, N-2 ... N-M, until we overflow. - */ - if (retval == -EEXIST) { - len = snprintf(slot->name, SLOT_NAME_SIZE, - "%d-%d", slot->number, dup++); - if (len < SLOT_NAME_SIZE) - goto duplicate_name; - else - ctrl_err(ctrl, "duplicate slot name " - "overflow\n"); - } ctrl_err(ctrl, "pci_hp_register failed with error %d\n", retval); goto error_info; } + get_power_status(hotplug_slot, &info->power_status); + get_attention_status(hotplug_slot, &info->attention_status); + get_latch_status(hotplug_slot, &info->latch_status); + get_adapter_status(hotplug_slot, &info->adapter_status); /* create additional sysfs entries */ if (EMI(ctrl)) { retval = sysfs_create_file(&hotplug_slot->pci_slot->kobj, @@ -287,7 +274,7 @@ static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 status) struct slot *slot = hotplug_slot->private; ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", - __func__, hotplug_slot->name); + __func__, slot_name(slot)); hotplug_slot->info->attention_status = status; @@ -303,7 +290,7 @@ static int enable_slot(struct hotplug_slot *hotplug_slot) struct slot *slot = hotplug_slot->private; ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", - __func__, hotplug_slot->name); + __func__, slot_name(slot)); return pciehp_sysfs_enable_slot(slot); } @@ -314,7 +301,7 @@ static int disable_slot(struct hotplug_slot *hotplug_slot) struct slot *slot = hotplug_slot->private; ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", - __func__, hotplug_slot->name); + __func__, slot_name(slot)); return pciehp_sysfs_disable_slot(slot); } @@ -325,7 +312,7 @@ static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value) int retval; ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", - __func__, hotplug_slot->name); + __func__, slot_name(slot)); retval = slot->hpc_ops->get_power_status(slot, value); if (retval < 0) @@ -340,7 +327,7 @@ static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value) int retval; ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", - __func__, hotplug_slot->name); + __func__, slot_name(slot)); retval = slot->hpc_ops->get_attention_status(slot, value); if (retval < 0) @@ -355,7 +342,7 @@ static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value) int retval; ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", - __func__, hotplug_slot->name); + __func__, slot_name(slot)); retval = slot->hpc_ops->get_latch_status(slot, value); if (retval < 0) @@ -370,7 +357,7 @@ static int get_adapter_status(struct hotplug_slot *hotplug_slot, u8 *value) int retval; ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", - __func__, hotplug_slot->name); + __func__, slot_name(slot)); retval = slot->hpc_ops->get_adapter_status(slot, value); if (retval < 0) @@ -386,7 +373,7 @@ static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, int retval; ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", - __func__, hotplug_slot->name); + __func__, slot_name(slot)); retval = slot->hpc_ops->get_max_bus_speed(slot, value); if (retval < 0) @@ -401,7 +388,7 @@ static int get_cur_bus_speed(struct hotplug_slot *hotplug_slot, enum pci_bus_spe int retval; ctrl_dbg(slot->ctrl, "%s - physical_slot = %s\n", - __func__, hotplug_slot->name); + __func__, slot_name(slot)); retval = slot->hpc_ops->get_cur_bus_speed(slot, value); if (retval < 0) diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index acb7f9efd182..d6c5eb297753 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -66,7 +66,7 @@ u8 pciehp_handle_attention_button(struct slot *p_slot) /* * Button pressed - See if need to TAKE ACTION!!! */ - ctrl_info(ctrl, "Button pressed on Slot(%s)\n", p_slot->name); + ctrl_info(ctrl, "Button pressed on Slot(%s)\n", slot_name(p_slot)); event_type = INT_BUTTON_PRESS; queue_interrupt_event(p_slot, event_type); @@ -88,13 +88,13 @@ u8 pciehp_handle_switch_change(struct slot *p_slot) /* * Switch opened */ - ctrl_info(ctrl, "Latch open on Slot(%s)\n", p_slot->name); + ctrl_info(ctrl, "Latch open on Slot(%s)\n", slot_name(p_slot)); event_type = INT_SWITCH_OPEN; } else { /* * Switch closed */ - ctrl_info(ctrl, "Latch close on Slot(%s)\n", p_slot->name); + ctrl_info(ctrl, "Latch close on Slot(%s)\n", slot_name(p_slot)); event_type = INT_SWITCH_CLOSE; } @@ -120,13 +120,14 @@ u8 pciehp_handle_presence_change(struct slot *p_slot) /* * Card Present */ - ctrl_info(ctrl, "Card present on Slot(%s)\n", p_slot->name); + ctrl_info(ctrl, "Card present on Slot(%s)\n", slot_name(p_slot)); event_type = INT_PRESENCE_ON; } else { /* * Not Present */ - ctrl_info(ctrl, "Card not present on Slot(%s)\n", p_slot->name); + ctrl_info(ctrl, "Card not present on Slot(%s)\n", + slot_name(p_slot)); event_type = INT_PRESENCE_OFF; } @@ -148,13 +149,13 @@ u8 pciehp_handle_power_fault(struct slot *p_slot) * power fault Cleared */ ctrl_info(ctrl, "Power fault cleared on Slot(%s)\n", - p_slot->name); + slot_name(p_slot)); event_type = INT_POWER_FAULT_CLEAR; } else { /* * power fault */ - ctrl_info(ctrl, "Power fault on Slot(%s)\n", p_slot->name); + ctrl_info(ctrl, "Power fault on Slot(%s)\n", slot_name(p_slot)); event_type = INT_POWER_FAULT; ctrl_info(ctrl, "power fault bit %x set\n", 0); } @@ -225,9 +226,6 @@ static int board_added(struct slot *p_slot) if (PWR_LED(ctrl)) p_slot->hpc_ops->green_led_blink(p_slot); - /* Wait for ~1 second */ - msleep(1000); - /* Check link training status */ retval = p_slot->hpc_ops->check_lnk_status(ctrl); if (retval) { @@ -412,12 +410,12 @@ static void handle_button_press_event(struct slot *p_slot) p_slot->state = BLINKINGOFF_STATE; ctrl_info(ctrl, "PCI slot #%s - powering off due to button " - "press.\n", p_slot->name); + "press.\n", slot_name(p_slot)); } else { p_slot->state = BLINKINGON_STATE; ctrl_info(ctrl, "PCI slot #%s - powering on due to button " - "press.\n", p_slot->name); + "press.\n", slot_name(p_slot)); } /* blink green LED and turn off amber */ if (PWR_LED(ctrl)) @@ -434,7 +432,7 @@ static void handle_button_press_event(struct slot *p_slot) * press the attention again before the 5 sec. limit * expires to cancel hot-add or hot-remove */ - ctrl_info(ctrl, "Button cancel on Slot(%s)\n", p_slot->name); + ctrl_info(ctrl, "Button cancel on Slot(%s)\n", slot_name(p_slot)); ctrl_dbg(ctrl, "%s: button cancel\n", __func__); cancel_delayed_work(&p_slot->work); if (p_slot->state == BLINKINGOFF_STATE) { @@ -447,7 +445,7 @@ static void handle_button_press_event(struct slot *p_slot) if (ATTN_LED(ctrl)) p_slot->hpc_ops->set_attention_status(p_slot, 0); ctrl_info(ctrl, "PCI slot #%s - action canceled " - "due to button press\n", p_slot->name); + "due to button press\n", slot_name(p_slot)); p_slot->state = STATIC_STATE; break; case POWEROFF_STATE: @@ -457,7 +455,7 @@ static void handle_button_press_event(struct slot *p_slot) * this means that the previous attention button action * to hot-add or hot-remove is undergoing */ - ctrl_info(ctrl, "Button ignore on Slot(%s)\n", p_slot->name); + ctrl_info(ctrl, "Button ignore on Slot(%s)\n", slot_name(p_slot)); update_slot_info(p_slot); break; default: @@ -540,7 +538,7 @@ int pciehp_enable_slot(struct slot *p_slot) rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); if (rc || !getstatus) { ctrl_info(ctrl, "%s: no adapter on slot(%s)\n", - __func__, p_slot->name); + __func__, slot_name(p_slot)); mutex_unlock(&p_slot->ctrl->crit_sect); return -ENODEV; } @@ -548,7 +546,7 @@ int pciehp_enable_slot(struct slot *p_slot) rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); if (rc || getstatus) { ctrl_info(ctrl, "%s: latch open on slot(%s)\n", - __func__, p_slot->name); + __func__, slot_name(p_slot)); mutex_unlock(&p_slot->ctrl->crit_sect); return -ENODEV; } @@ -558,7 +556,7 @@ int pciehp_enable_slot(struct slot *p_slot) rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); if (rc || getstatus) { ctrl_info(ctrl, "%s: already enabled on slot(%s)\n", - __func__, p_slot->name); + __func__, slot_name(p_slot)); mutex_unlock(&p_slot->ctrl->crit_sect); return -EINVAL; } @@ -594,7 +592,7 @@ int pciehp_disable_slot(struct slot *p_slot) ret = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); if (ret || !getstatus) { ctrl_info(ctrl, "%s: no adapter on slot(%s)\n", - __func__, p_slot->name); + __func__, slot_name(p_slot)); mutex_unlock(&p_slot->ctrl->crit_sect); return -ENODEV; } @@ -604,7 +602,7 @@ int pciehp_disable_slot(struct slot *p_slot) ret = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); if (ret || getstatus) { ctrl_info(ctrl, "%s: latch open on slot(%s)\n", - __func__, p_slot->name); + __func__, slot_name(p_slot)); mutex_unlock(&p_slot->ctrl->crit_sect); return -ENODEV; } @@ -614,7 +612,7 @@ int pciehp_disable_slot(struct slot *p_slot) ret = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); if (ret || !getstatus) { ctrl_info(ctrl, "%s: already disabled slot(%s)\n", - __func__, p_slot->name); + __func__, slot_name(p_slot)); mutex_unlock(&p_slot->ctrl->crit_sect); return -EINVAL; } @@ -645,14 +643,16 @@ int pciehp_sysfs_enable_slot(struct slot *p_slot) break; case POWERON_STATE: ctrl_info(ctrl, "Slot %s is already in powering on state\n", - p_slot->name); + slot_name(p_slot)); break; case BLINKINGOFF_STATE: case POWEROFF_STATE: - ctrl_info(ctrl, "Already enabled on slot %s\n", p_slot->name); + ctrl_info(ctrl, "Already enabled on slot %s\n", + slot_name(p_slot)); break; default: - ctrl_err(ctrl, "Not a valid state on slot %s\n", p_slot->name); + ctrl_err(ctrl, "Not a valid state on slot %s\n", + slot_name(p_slot)); break; } mutex_unlock(&p_slot->lock); @@ -678,14 +678,16 @@ int pciehp_sysfs_disable_slot(struct slot *p_slot) break; case POWEROFF_STATE: ctrl_info(ctrl, "Slot %s is already in powering off state\n", - p_slot->name); + slot_name(p_slot)); break; case BLINKINGON_STATE: case POWERON_STATE: - ctrl_info(ctrl, "Already disabled on slot %s\n", p_slot->name); + ctrl_info(ctrl, "Already disabled on slot %s\n", + slot_name(p_slot)); break; default: - ctrl_err(ctrl, "Not a valid state on slot %s\n", p_slot->name); + ctrl_err(ctrl, "Not a valid state on slot %s\n", + slot_name(p_slot)); break; } mutex_unlock(&p_slot->lock); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 8e9530c4c36d..58c72d2cc217 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -125,6 +125,7 @@ static inline int pciehp_writel(struct controller *ctrl, int reg, u32 value) /* Field definitions in Link Capabilities Register */ #define MAX_LNK_SPEED 0x000F #define MAX_LNK_WIDTH 0x03F0 +#define LINK_ACTIVE_REPORTING 0x00100000 /* Link Width Encoding */ #define LNK_X1 0x01 @@ -141,6 +142,7 @@ static inline int pciehp_writel(struct controller *ctrl, int reg, u32 value) #define LNK_TRN_ERR 0x0400 #define LNK_TRN 0x0800 #define SLOT_CLK_CONF 0x1000 +#define LINK_ACTIVE 0x2000 /* Field definitions in Slot Capabilities Register */ #define ATTN_BUTTN_PRSN 0x00000001 @@ -368,11 +370,52 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask) return retval; } +static inline int check_link_active(struct controller *ctrl) +{ + u16 link_status; + + if (pciehp_readw(ctrl, LNKSTATUS, &link_status)) + return 0; + return !!(link_status & LINK_ACTIVE); +} + +static void pcie_wait_link_active(struct controller *ctrl) +{ + int timeout = 1000; + + if (check_link_active(ctrl)) + return; + while (timeout > 0) { + msleep(10); + timeout -= 10; + if (check_link_active(ctrl)) + return; + } + ctrl_dbg(ctrl, "Data Link Layer Link Active not set in 1000 msec\n"); +} + static int hpc_check_lnk_status(struct controller *ctrl) { u16 lnk_status; int retval = 0; + /* + * Data Link Layer Link Active Reporting must be capable for + * hot-plug capable downstream port. But old controller might + * not implement it. In this case, we wait for 1000 ms. + */ + if (ctrl->link_active_reporting){ + /* Wait for Data Link Layer Link Active bit to be set */ + pcie_wait_link_active(ctrl); + /* + * We must wait for 100 ms after the Data Link Layer + * Link Active bit reads 1b before initiating a + * configuration access to the hot added device. + */ + msleep(100); + } else + msleep(1000); + retval = pciehp_readw(ctrl, LNKSTATUS, &lnk_status); if (retval) { ctrl_err(ctrl, "%s: Cannot read LNKSTATUS register\n", @@ -1061,7 +1104,6 @@ static int pcie_init_slot(struct controller *ctrl) slot->device = ctrl->slot_device_offset + slot->hp_slot; slot->hpc_ops = ctrl->hpc_ops; slot->number = ctrl->first_slot; - snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number); mutex_init(&slot->lock); INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work); list_add(&slot->slot_list, &ctrl->slot_list); @@ -1132,7 +1174,7 @@ static inline void dbg_ctrl(struct controller *ctrl) struct controller *pcie_init(struct pcie_device *dev) { struct controller *ctrl; - u32 slot_cap; + u32 slot_cap, link_cap; struct pci_dev *pdev = dev->port; ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL); @@ -1148,11 +1190,11 @@ struct controller *pcie_init(struct pcie_device *dev) if (!ctrl->cap_base) { ctrl_err(ctrl, "%s: Cannot find PCI Express capability\n", __func__); - goto abort; + goto abort_ctrl; } if (pciehp_readl(ctrl, SLOTCAP, &slot_cap)) { ctrl_err(ctrl, "%s: Cannot read SLOTCAP register\n", __func__); - goto abort; + goto abort_ctrl; } ctrl->slot_cap = slot_cap; @@ -1174,6 +1216,16 @@ struct controller *pcie_init(struct pcie_device *dev) !(POWER_CTRL(ctrl) | ATTN_LED(ctrl) | PWR_LED(ctrl) | EMI(ctrl))) ctrl->no_cmd_complete = 1; + /* Check if Data Link Layer Link Active Reporting is implemented */ + if (pciehp_readl(ctrl, LNKCAP, &link_cap)) { + ctrl_err(ctrl, "%s: Cannot read LNKCAP register\n", __func__); + goto abort_ctrl; + } + if (link_cap & LINK_ACTIVE_REPORTING) { + ctrl_dbg(ctrl, "Link Active Reporting supported\n"); + ctrl->link_active_reporting = 1; + } + /* Clear all remaining event bits in Slot Status register */ if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) goto abort_ctrl; diff --git a/drivers/pci/hotplug/rpaphp_slot.c b/drivers/pci/hotplug/rpaphp_slot.c index 50884507b8be..2ea9cf1a8d02 100644 --- a/drivers/pci/hotplug/rpaphp_slot.c +++ b/drivers/pci/hotplug/rpaphp_slot.c @@ -43,7 +43,7 @@ static void rpaphp_release_slot(struct hotplug_slot *hotplug_slot) void dealloc_slot_struct(struct slot *slot) { kfree(slot->hotplug_slot->info); - kfree(slot->hotplug_slot->name); + kfree(slot->name); kfree(slot->hotplug_slot); kfree(slot); } @@ -63,11 +63,9 @@ struct slot *alloc_slot_struct(struct device_node *dn, GFP_KERNEL); if (!slot->hotplug_slot->info) goto error_hpslot; - slot->hotplug_slot->name = kmalloc(strlen(drc_name) + 1, GFP_KERNEL); - if (!slot->hotplug_slot->name) + slot->name = kstrdup(drc_name, GFP_KERNEL); + if (!slot->name) goto error_info; - slot->name = slot->hotplug_slot->name; - strcpy(slot->name, drc_name); slot->dn = dn; slot->index = drc_index; slot->power_domain = power_domain; @@ -137,7 +135,7 @@ int rpaphp_register_slot(struct slot *slot) slotno = PCI_SLOT(PCI_DN(slot->dn->child)->devfn); else slotno = -1; - retval = pci_hp_register(php_slot, slot->bus, slotno); + retval = pci_hp_register(php_slot, slot->bus, slotno, slot->name); if (retval) { err("pci_hp_register failed with error %d\n", retval); return retval; diff --git a/drivers/pci/hotplug/sgi_hotplug.c b/drivers/pci/hotplug/sgi_hotplug.c index 59f42501acce..3eee70928d45 100644 --- a/drivers/pci/hotplug/sgi_hotplug.c +++ b/drivers/pci/hotplug/sgi_hotplug.c @@ -161,7 +161,8 @@ static int sn_pci_bus_valid(struct pci_bus *pci_bus) } static int sn_hp_slot_private_alloc(struct hotplug_slot *bss_hotplug_slot, - struct pci_bus *pci_bus, int device) + struct pci_bus *pci_bus, int device, + char *name) { struct pcibus_info *pcibus_info; struct slot *slot; @@ -173,15 +174,9 @@ static int sn_hp_slot_private_alloc(struct hotplug_slot *bss_hotplug_slot, return -ENOMEM; bss_hotplug_slot->private = slot; - bss_hotplug_slot->name = kmalloc(SN_SLOT_NAME_SIZE, GFP_KERNEL); - if (!bss_hotplug_slot->name) { - kfree(bss_hotplug_slot->private); - return -ENOMEM; - } - slot->device_num = device; slot->pci_bus = pci_bus; - sprintf(bss_hotplug_slot->name, "%04x:%02x:%02x", + sprintf(name, "%04x:%02x:%02x", pci_domain_nr(pci_bus), ((u16)pcibus_info->pbi_buscommon.bs_persist_busnum), device + 1); @@ -608,7 +603,6 @@ static inline int get_power_status(struct hotplug_slot *bss_hotplug_slot, static void sn_release_slot(struct hotplug_slot *bss_hotplug_slot) { kfree(bss_hotplug_slot->info); - kfree(bss_hotplug_slot->name); kfree(bss_hotplug_slot->private); kfree(bss_hotplug_slot); } @@ -618,6 +612,7 @@ static int sn_hotplug_slot_register(struct pci_bus *pci_bus) int device; struct pci_slot *pci_slot; struct hotplug_slot *bss_hotplug_slot; + char name[SN_SLOT_NAME_SIZE]; int rc = 0; /* @@ -645,15 +640,14 @@ static int sn_hotplug_slot_register(struct pci_bus *pci_bus) } if (sn_hp_slot_private_alloc(bss_hotplug_slot, - pci_bus, device)) { + pci_bus, device, name)) { rc = -ENOMEM; goto alloc_err; } - bss_hotplug_slot->ops = &sn_hotplug_slot_ops; bss_hotplug_slot->release = &sn_release_slot; - rc = pci_hp_register(bss_hotplug_slot, pci_bus, device); + rc = pci_hp_register(bss_hotplug_slot, pci_bus, device, name); if (rc) goto register_err; diff --git a/drivers/pci/hotplug/shpchp.h b/drivers/pci/hotplug/shpchp.h index 8a026f750deb..4d9fed00e1d0 100644 --- a/drivers/pci/hotplug/shpchp.h +++ b/drivers/pci/hotplug/shpchp.h @@ -69,15 +69,13 @@ struct slot { u8 state; u8 presence_save; u8 pwr_save; - struct timer_list task_event; - u8 hp_slot; struct controller *ctrl; struct hpc_ops *hpc_ops; struct hotplug_slot *hotplug_slot; struct list_head slot_list; - char name[SLOT_NAME_SIZE]; struct delayed_work work; /* work for button event */ struct mutex lock; + u8 hp_slot; }; struct event_info { @@ -169,6 +167,11 @@ extern void cleanup_slots(struct controller *ctrl); extern void shpchp_queue_pushbutton_work(struct work_struct *work); extern int shpc_init( struct controller *ctrl, struct pci_dev *pdev); +static inline const char *slot_name(struct slot *slot) +{ + return hotplug_slot_name(slot->hotplug_slot); +} + #ifdef CONFIG_ACPI #include <linux/pci-acpi.h> static inline int get_hp_params_from_firmware(struct pci_dev *dev, diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index cc38615395f1..7af9191df4d6 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -89,7 +89,7 @@ static void release_slot(struct hotplug_slot *hotplug_slot) { struct slot *slot = hotplug_slot->private; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); kfree(slot->hotplug_slot->info); kfree(slot->hotplug_slot); @@ -101,8 +101,9 @@ static int init_slots(struct controller *ctrl) struct slot *slot; struct hotplug_slot *hotplug_slot; struct hotplug_slot_info *info; + char name[SLOT_NAME_SIZE]; int retval = -ENOMEM; - int i, len, dup = 1; + int i; for (i = 0; i < ctrl->num_slots; i++) { slot = kzalloc(sizeof(*slot), GFP_KERNEL); @@ -119,8 +120,6 @@ static int init_slots(struct controller *ctrl) goto error_hpslot; hotplug_slot->info = info; - hotplug_slot->name = slot->name; - slot->hp_slot = i; slot->ctrl = ctrl; slot->bus = ctrl->pci_dev->subordinate->number; @@ -133,37 +132,24 @@ static int init_slots(struct controller *ctrl) /* register this slot with the hotplug pci core */ hotplug_slot->private = slot; hotplug_slot->release = &release_slot; - snprintf(slot->name, SLOT_NAME_SIZE, "%d", slot->number); + snprintf(name, SLOT_NAME_SIZE, "%d", slot->number); hotplug_slot->ops = &shpchp_hotplug_slot_ops; - get_power_status(hotplug_slot, &info->power_status); - get_attention_status(hotplug_slot, &info->attention_status); - get_latch_status(hotplug_slot, &info->latch_status); - get_adapter_status(hotplug_slot, &info->adapter_status); - dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x " "slot_device_offset=%x\n", slot->bus, slot->device, slot->hp_slot, slot->number, ctrl->slot_device_offset); -duplicate_name: retval = pci_hp_register(slot->hotplug_slot, - ctrl->pci_dev->subordinate, slot->device); + ctrl->pci_dev->subordinate, slot->device, name); if (retval) { - /* - * If slot N already exists, we'll try to create - * slot N-1, N-2 ... N-M, until we overflow. - */ - if (retval == -EEXIST) { - len = snprintf(slot->name, SLOT_NAME_SIZE, - "%d-%d", slot->number, dup++); - if (len < SLOT_NAME_SIZE) - goto duplicate_name; - else - err("duplicate slot name overflow\n"); - } err("pci_hp_register failed with error %d\n", retval); goto error_info; } + get_power_status(hotplug_slot, &info->power_status); + get_attention_status(hotplug_slot, &info->attention_status); + get_latch_status(hotplug_slot, &info->latch_status); + get_adapter_status(hotplug_slot, &info->adapter_status); + list_add(&slot->slot_list, &ctrl->slot_list); } @@ -201,7 +187,7 @@ static int set_attention_status (struct hotplug_slot *hotplug_slot, u8 status) { struct slot *slot = get_slot(hotplug_slot); - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); hotplug_slot->info->attention_status = status; slot->hpc_ops->set_attention_status(slot, status); @@ -213,7 +199,7 @@ static int enable_slot (struct hotplug_slot *hotplug_slot) { struct slot *slot = get_slot(hotplug_slot); - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); return shpchp_sysfs_enable_slot(slot); } @@ -222,7 +208,7 @@ static int disable_slot (struct hotplug_slot *hotplug_slot) { struct slot *slot = get_slot(hotplug_slot); - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); return shpchp_sysfs_disable_slot(slot); } @@ -232,7 +218,7 @@ static int get_power_status (struct hotplug_slot *hotplug_slot, u8 *value) struct slot *slot = get_slot(hotplug_slot); int retval; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); retval = slot->hpc_ops->get_power_status(slot, value); if (retval < 0) @@ -246,7 +232,7 @@ static int get_attention_status (struct hotplug_slot *hotplug_slot, u8 *value) struct slot *slot = get_slot(hotplug_slot); int retval; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); retval = slot->hpc_ops->get_attention_status(slot, value); if (retval < 0) @@ -260,7 +246,7 @@ static int get_latch_status (struct hotplug_slot *hotplug_slot, u8 *value) struct slot *slot = get_slot(hotplug_slot); int retval; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); retval = slot->hpc_ops->get_latch_status(slot, value); if (retval < 0) @@ -274,7 +260,7 @@ static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value) struct slot *slot = get_slot(hotplug_slot); int retval; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); retval = slot->hpc_ops->get_adapter_status(slot, value); if (retval < 0) @@ -289,7 +275,7 @@ static int get_max_bus_speed(struct hotplug_slot *hotplug_slot, struct slot *slot = get_slot(hotplug_slot); int retval; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); retval = slot->hpc_ops->get_max_bus_speed(slot, value); if (retval < 0) @@ -303,7 +289,7 @@ static int get_cur_bus_speed (struct hotplug_slot *hotplug_slot, enum pci_bus_sp struct slot *slot = get_slot(hotplug_slot); int retval; - dbg("%s - physical_slot = %s\n", __func__, hotplug_slot->name); + dbg("%s - physical_slot = %s\n", __func__, slot_name(slot)); retval = slot->hpc_ops->get_cur_bus_speed(slot, value); if (retval < 0) diff --git a/drivers/pci/hotplug/shpchp_ctrl.c b/drivers/pci/hotplug/shpchp_ctrl.c index dfb53932dfbc..919b1ee44313 100644 --- a/drivers/pci/hotplug/shpchp_ctrl.c +++ b/drivers/pci/hotplug/shpchp_ctrl.c @@ -70,7 +70,7 @@ u8 shpchp_handle_attention_button(u8 hp_slot, struct controller *ctrl) /* * Button pressed - See if need to TAKE ACTION!!! */ - info("Button pressed on Slot(%s)\n", p_slot->name); + info("Button pressed on Slot(%s)\n", slot_name(p_slot)); event_type = INT_BUTTON_PRESS; queue_interrupt_event(p_slot, event_type); @@ -98,7 +98,7 @@ u8 shpchp_handle_switch_change(u8 hp_slot, struct controller *ctrl) /* * Switch opened */ - info("Latch open on Slot(%s)\n", p_slot->name); + info("Latch open on Slot(%s)\n", slot_name(p_slot)); event_type = INT_SWITCH_OPEN; if (p_slot->pwr_save && p_slot->presence_save) { event_type = INT_POWER_FAULT; @@ -108,7 +108,7 @@ u8 shpchp_handle_switch_change(u8 hp_slot, struct controller *ctrl) /* * Switch closed */ - info("Latch close on Slot(%s)\n", p_slot->name); + info("Latch close on Slot(%s)\n", slot_name(p_slot)); event_type = INT_SWITCH_CLOSE; } @@ -135,13 +135,13 @@ u8 shpchp_handle_presence_change(u8 hp_slot, struct controller *ctrl) /* * Card Present */ - info("Card present on Slot(%s)\n", p_slot->name); + info("Card present on Slot(%s)\n", slot_name(p_slot)); event_type = INT_PRESENCE_ON; } else { /* * Not Present */ - info("Card not present on Slot(%s)\n", p_slot->name); + info("Card not present on Slot(%s)\n", slot_name(p_slot)); event_type = INT_PRESENCE_OFF; } @@ -164,14 +164,14 @@ u8 shpchp_handle_power_fault(u8 hp_slot, struct controller *ctrl) /* * Power fault Cleared */ - info("Power fault cleared on Slot(%s)\n", p_slot->name); + info("Power fault cleared on Slot(%s)\n", slot_name(p_slot)); p_slot->status = 0x00; event_type = INT_POWER_FAULT_CLEAR; } else { /* * Power fault */ - info("Power fault on Slot(%s)\n", p_slot->name); + info("Power fault on Slot(%s)\n", slot_name(p_slot)); event_type = INT_POWER_FAULT; /* set power fault status for this board */ p_slot->status = 0xFF; @@ -493,11 +493,11 @@ static void handle_button_press_event(struct slot *p_slot) if (getstatus) { p_slot->state = BLINKINGOFF_STATE; info("PCI slot #%s - powering off due to button " - "press.\n", p_slot->name); + "press.\n", slot_name(p_slot)); } else { p_slot->state = BLINKINGON_STATE; info("PCI slot #%s - powering on due to button " - "press.\n", p_slot->name); + "press.\n", slot_name(p_slot)); } /* blink green LED and turn off amber */ p_slot->hpc_ops->green_led_blink(p_slot); @@ -512,7 +512,7 @@ static void handle_button_press_event(struct slot *p_slot) * press the attention again before the 5 sec. limit * expires to cancel hot-add or hot-remove */ - info("Button cancel on Slot(%s)\n", p_slot->name); + info("Button cancel on Slot(%s)\n", slot_name(p_slot)); dbg("%s: button cancel\n", __func__); cancel_delayed_work(&p_slot->work); if (p_slot->state == BLINKINGOFF_STATE) @@ -521,7 +521,7 @@ static void handle_button_press_event(struct slot *p_slot) p_slot->hpc_ops->green_led_off(p_slot); p_slot->hpc_ops->set_attention_status(p_slot, 0); info("PCI slot #%s - action canceled due to button press\n", - p_slot->name); + slot_name(p_slot)); p_slot->state = STATIC_STATE; break; case POWEROFF_STATE: @@ -531,7 +531,7 @@ static void handle_button_press_event(struct slot *p_slot) * this means that the previous attention button action * to hot-add or hot-remove is undergoing */ - info("Button ignore on Slot(%s)\n", p_slot->name); + info("Button ignore on Slot(%s)\n", slot_name(p_slot)); update_slot_info(p_slot); break; default: @@ -574,17 +574,17 @@ static int shpchp_enable_slot (struct slot *p_slot) mutex_lock(&p_slot->ctrl->crit_sect); rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); if (rc || !getstatus) { - info("No adapter on slot(%s)\n", p_slot->name); + info("No adapter on slot(%s)\n", slot_name(p_slot)); goto out; } rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); if (rc || getstatus) { - info("Latch open on slot(%s)\n", p_slot->name); + info("Latch open on slot(%s)\n", slot_name(p_slot)); goto out; } rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); if (rc || getstatus) { - info("Already enabled on slot(%s)\n", p_slot->name); + info("Already enabled on slot(%s)\n", slot_name(p_slot)); goto out; } @@ -633,17 +633,17 @@ static int shpchp_disable_slot (struct slot *p_slot) rc = p_slot->hpc_ops->get_adapter_status(p_slot, &getstatus); if (rc || !getstatus) { - info("No adapter on slot(%s)\n", p_slot->name); + info("No adapter on slot(%s)\n", slot_name(p_slot)); goto out; } rc = p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); if (rc || getstatus) { - info("Latch open on slot(%s)\n", p_slot->name); + info("Latch open on slot(%s)\n", slot_name(p_slot)); goto out; } rc = p_slot->hpc_ops->get_power_status(p_slot, &getstatus); if (rc || !getstatus) { - info("Already disabled slot(%s)\n", p_slot->name); + info("Already disabled slot(%s)\n", slot_name(p_slot)); goto out; } @@ -671,14 +671,14 @@ int shpchp_sysfs_enable_slot(struct slot *p_slot) break; case POWERON_STATE: info("Slot %s is already in powering on state\n", - p_slot->name); + slot_name(p_slot)); break; case BLINKINGOFF_STATE: case POWEROFF_STATE: - info("Already enabled on slot %s\n", p_slot->name); + info("Already enabled on slot %s\n", slot_name(p_slot)); break; default: - err("Not a valid state on slot %s\n", p_slot->name); + err("Not a valid state on slot %s\n", slot_name(p_slot)); break; } mutex_unlock(&p_slot->lock); @@ -703,14 +703,14 @@ int shpchp_sysfs_disable_slot(struct slot *p_slot) break; case POWEROFF_STATE: info("Slot %s is already in powering off state\n", - p_slot->name); + slot_name(p_slot)); break; case BLINKINGON_STATE: case POWERON_STATE: - info("Already disabled on slot %s\n", p_slot->name); + info("Already disabled on slot %s\n", slot_name(p_slot)); break; default: - err("Not a valid state on slot %s\n", p_slot->name); + err("Not a valid state on slot %s\n", slot_name(p_slot)); break; } mutex_unlock(&p_slot->lock); diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c index 8b51e10b7783..a2692724b68f 100644 --- a/drivers/pci/intel-iommu.c +++ b/drivers/pci/intel-iommu.c @@ -18,6 +18,7 @@ * Author: Ashok Raj <ashok.raj@intel.com> * Author: Shaohua Li <shaohua.li@intel.com> * Author: Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> + * Author: Fenghua Yu <fenghua.yu@intel.com> */ #include <linux/init.h> @@ -35,11 +36,13 @@ #include <linux/timer.h> #include <linux/iova.h> #include <linux/intel-iommu.h> -#include <asm/proto.h> /* force_iommu in this header in x86-64*/ #include <asm/cacheflush.h> #include <asm/iommu.h> #include "pci.h" +#define ROOT_SIZE VTD_PAGE_SIZE +#define CONTEXT_SIZE VTD_PAGE_SIZE + #define IS_GFX_DEVICE(pdev) ((pdev->class >> 16) == PCI_BASE_CLASS_DISPLAY) #define IS_ISA_DEVICE(pdev) ((pdev->class >> 8) == PCI_CLASS_BRIDGE_ISA) @@ -199,7 +202,7 @@ static struct context_entry * device_to_context_entry(struct intel_iommu *iommu, spin_unlock_irqrestore(&iommu->lock, flags); return NULL; } - __iommu_flush_cache(iommu, (void *)context, PAGE_SIZE_4K); + __iommu_flush_cache(iommu, (void *)context, CONTEXT_SIZE); phy_addr = virt_to_phys((void *)context); set_root_value(root, phy_addr); set_root_present(root); @@ -345,7 +348,7 @@ static struct dma_pte * addr_to_dma_pte(struct dmar_domain *domain, u64 addr) return NULL; } __iommu_flush_cache(domain->iommu, tmp_page, - PAGE_SIZE_4K); + PAGE_SIZE); dma_set_pte_addr(*pte, virt_to_phys(tmp_page)); /* * high level table always sets r/w, last level page @@ -408,13 +411,13 @@ static void dma_pte_clear_range(struct dmar_domain *domain, u64 start, u64 end) start &= (((u64)1) << addr_width) - 1; end &= (((u64)1) << addr_width) - 1; /* in case it's partial page */ - start = PAGE_ALIGN_4K(start); - end &= PAGE_MASK_4K; + start = PAGE_ALIGN(start); + end &= PAGE_MASK; /* we don't need lock here, nobody else touches the iova range */ while (start < end) { dma_pte_clear_one(domain, start); - start += PAGE_SIZE_4K; + start += VTD_PAGE_SIZE; } } @@ -468,7 +471,7 @@ static int iommu_alloc_root_entry(struct intel_iommu *iommu) if (!root) return -ENOMEM; - __iommu_flush_cache(iommu, root, PAGE_SIZE_4K); + __iommu_flush_cache(iommu, root, ROOT_SIZE); spin_lock_irqsave(&iommu->lock, flags); iommu->root_entry = root; @@ -567,27 +570,6 @@ static int __iommu_flush_context(struct intel_iommu *iommu, return 0; } -static int inline iommu_flush_context_global(struct intel_iommu *iommu, - int non_present_entry_flush) -{ - return __iommu_flush_context(iommu, 0, 0, 0, DMA_CCMD_GLOBAL_INVL, - non_present_entry_flush); -} - -static int inline iommu_flush_context_domain(struct intel_iommu *iommu, u16 did, - int non_present_entry_flush) -{ - return __iommu_flush_context(iommu, did, 0, 0, DMA_CCMD_DOMAIN_INVL, - non_present_entry_flush); -} - -static int inline iommu_flush_context_device(struct intel_iommu *iommu, - u16 did, u16 source_id, u8 function_mask, int non_present_entry_flush) -{ - return __iommu_flush_context(iommu, did, source_id, function_mask, - DMA_CCMD_DEVICE_INVL, non_present_entry_flush); -} - /* return value determine if we need a write buffer flush */ static int __iommu_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr, unsigned int size_order, u64 type, @@ -655,37 +637,25 @@ static int __iommu_flush_iotlb(struct intel_iommu *iommu, u16 did, printk(KERN_ERR"IOMMU: flush IOTLB failed\n"); if (DMA_TLB_IAIG(val) != DMA_TLB_IIRG(type)) pr_debug("IOMMU: tlb flush request %Lx, actual %Lx\n", - DMA_TLB_IIRG(type), DMA_TLB_IAIG(val)); + (unsigned long long)DMA_TLB_IIRG(type), + (unsigned long long)DMA_TLB_IAIG(val)); /* flush iotlb entry will implicitly flush write buffer */ return 0; } -static int inline iommu_flush_iotlb_global(struct intel_iommu *iommu, - int non_present_entry_flush) -{ - return __iommu_flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH, - non_present_entry_flush); -} - -static int inline iommu_flush_iotlb_dsi(struct intel_iommu *iommu, u16 did, - int non_present_entry_flush) -{ - return __iommu_flush_iotlb(iommu, did, 0, 0, DMA_TLB_DSI_FLUSH, - non_present_entry_flush); -} - static int iommu_flush_iotlb_psi(struct intel_iommu *iommu, u16 did, u64 addr, unsigned int pages, int non_present_entry_flush) { unsigned int mask; - BUG_ON(addr & (~PAGE_MASK_4K)); + BUG_ON(addr & (~VTD_PAGE_MASK)); BUG_ON(pages == 0); /* Fallback to domain selective flush if no PSI support */ if (!cap_pgsel_inv(iommu->cap)) - return iommu_flush_iotlb_dsi(iommu, did, - non_present_entry_flush); + return iommu->flush.flush_iotlb(iommu, did, 0, 0, + DMA_TLB_DSI_FLUSH, + non_present_entry_flush); /* * PSI requires page size to be 2 ^ x, and the base address is naturally @@ -694,11 +664,12 @@ static int iommu_flush_iotlb_psi(struct intel_iommu *iommu, u16 did, mask = ilog2(__roundup_pow_of_two(pages)); /* Fallback to domain selective flush if size is too big */ if (mask > cap_max_amask_val(iommu->cap)) - return iommu_flush_iotlb_dsi(iommu, did, - non_present_entry_flush); + return iommu->flush.flush_iotlb(iommu, did, 0, 0, + DMA_TLB_DSI_FLUSH, non_present_entry_flush); - return __iommu_flush_iotlb(iommu, did, addr, mask, - DMA_TLB_PSI_FLUSH, non_present_entry_flush); + return iommu->flush.flush_iotlb(iommu, did, addr, mask, + DMA_TLB_PSI_FLUSH, + non_present_entry_flush); } static void iommu_disable_protect_mem_regions(struct intel_iommu *iommu) @@ -831,7 +802,7 @@ void dmar_msi_read(int irq, struct msi_msg *msg) } static int iommu_page_fault_do_one(struct intel_iommu *iommu, int type, - u8 fault_reason, u16 source_id, u64 addr) + u8 fault_reason, u16 source_id, unsigned long long addr) { const char *reason; @@ -1084,9 +1055,9 @@ static void dmar_init_reserved_ranges(void) if (!r->flags || !(r->flags & IORESOURCE_MEM)) continue; addr = r->start; - addr &= PAGE_MASK_4K; + addr &= PAGE_MASK; size = r->end - addr; - size = PAGE_ALIGN_4K(size); + size = PAGE_ALIGN(size); iova = reserve_iova(&reserved_iova_list, IOVA_PFN(addr), IOVA_PFN(size + addr) - 1); if (!iova) @@ -1148,7 +1119,7 @@ static int domain_init(struct dmar_domain *domain, int guest_width) domain->pgd = (struct dma_pte *)alloc_pgtable_page(); if (!domain->pgd) return -ENOMEM; - __iommu_flush_cache(iommu, domain->pgd, PAGE_SIZE_4K); + __iommu_flush_cache(iommu, domain->pgd, PAGE_SIZE); return 0; } @@ -1164,7 +1135,7 @@ static void domain_exit(struct dmar_domain *domain) /* destroy iovas */ put_iova_domain(&domain->iovad); end = DOMAIN_MAX_ADDR(domain->gaw); - end = end & (~PAGE_MASK_4K); + end = end & (~PAGE_MASK); /* clear ptes */ dma_pte_clear_range(domain, 0, end); @@ -1204,11 +1175,13 @@ static int domain_context_mapping_one(struct dmar_domain *domain, __iommu_flush_cache(iommu, context, sizeof(*context)); /* it's a non-present to present mapping */ - if (iommu_flush_context_device(iommu, domain->id, - (((u16)bus) << 8) | devfn, DMA_CCMD_MASK_NOBIT, 1)) + if (iommu->flush.flush_context(iommu, domain->id, + (((u16)bus) << 8) | devfn, DMA_CCMD_MASK_NOBIT, + DMA_CCMD_DEVICE_INVL, 1)) iommu_flush_write_buffer(iommu); else - iommu_flush_iotlb_dsi(iommu, 0, 0); + iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_DSI_FLUSH, 0); + spin_unlock_irqrestore(&iommu->lock, flags); return 0; } @@ -1283,22 +1256,25 @@ domain_page_mapping(struct dmar_domain *domain, dma_addr_t iova, u64 start_pfn, end_pfn; struct dma_pte *pte; int index; + int addr_width = agaw_to_width(domain->agaw); + + hpa &= (((u64)1) << addr_width) - 1; if ((prot & (DMA_PTE_READ|DMA_PTE_WRITE)) == 0) return -EINVAL; - iova &= PAGE_MASK_4K; - start_pfn = ((u64)hpa) >> PAGE_SHIFT_4K; - end_pfn = (PAGE_ALIGN_4K(((u64)hpa) + size)) >> PAGE_SHIFT_4K; + iova &= PAGE_MASK; + start_pfn = ((u64)hpa) >> VTD_PAGE_SHIFT; + end_pfn = (VTD_PAGE_ALIGN(((u64)hpa) + size)) >> VTD_PAGE_SHIFT; index = 0; while (start_pfn < end_pfn) { - pte = addr_to_dma_pte(domain, iova + PAGE_SIZE_4K * index); + pte = addr_to_dma_pte(domain, iova + VTD_PAGE_SIZE * index); if (!pte) return -ENOMEM; /* We don't need lock here, nobody else * touches the iova range */ BUG_ON(dma_pte_addr(*pte)); - dma_set_pte_addr(*pte, start_pfn << PAGE_SHIFT_4K); + dma_set_pte_addr(*pte, start_pfn << VTD_PAGE_SHIFT); dma_set_pte_prot(*pte, prot); __iommu_flush_cache(domain->iommu, pte, sizeof(*pte)); start_pfn++; @@ -1310,8 +1286,10 @@ domain_page_mapping(struct dmar_domain *domain, dma_addr_t iova, static void detach_domain_for_dev(struct dmar_domain *domain, u8 bus, u8 devfn) { clear_context_table(domain->iommu, bus, devfn); - iommu_flush_context_global(domain->iommu, 0); - iommu_flush_iotlb_global(domain->iommu, 0); + domain->iommu->flush.flush_context(domain->iommu, 0, 0, 0, + DMA_CCMD_GLOBAL_INVL, 0); + domain->iommu->flush.flush_iotlb(domain->iommu, 0, 0, 0, + DMA_TLB_GLOBAL_FLUSH, 0); } static void domain_remove_dev_info(struct dmar_domain *domain) @@ -1474,11 +1452,13 @@ error: return find_domain(pdev); } -static int iommu_prepare_identity_map(struct pci_dev *pdev, u64 start, u64 end) +static int iommu_prepare_identity_map(struct pci_dev *pdev, + unsigned long long start, + unsigned long long end) { struct dmar_domain *domain; unsigned long size; - u64 base; + unsigned long long base; int ret; printk(KERN_INFO @@ -1490,9 +1470,9 @@ static int iommu_prepare_identity_map(struct pci_dev *pdev, u64 start, u64 end) return -ENOMEM; /* The address might not be aligned */ - base = start & PAGE_MASK_4K; + base = start & PAGE_MASK; size = end - base; - size = PAGE_ALIGN_4K(size); + size = PAGE_ALIGN(size); if (!reserve_iova(&domain->iovad, IOVA_PFN(base), IOVA_PFN(base + size) - 1)) { printk(KERN_ERR "IOMMU: reserve iova failed\n"); @@ -1662,6 +1642,28 @@ int __init init_dmars(void) } } + for_each_drhd_unit(drhd) { + if (drhd->ignored) + continue; + + iommu = drhd->iommu; + if (dmar_enable_qi(iommu)) { + /* + * Queued Invalidate not enabled, use Register Based + * Invalidate + */ + iommu->flush.flush_context = __iommu_flush_context; + iommu->flush.flush_iotlb = __iommu_flush_iotlb; + printk(KERN_INFO "IOMMU 0x%Lx: using Register based " + "invalidation\n", drhd->reg_base_addr); + } else { + iommu->flush.flush_context = qi_flush_context; + iommu->flush.flush_iotlb = qi_flush_iotlb; + printk(KERN_INFO "IOMMU 0x%Lx: using Queued " + "invalidation\n", drhd->reg_base_addr); + } + } + /* * For each rmrr * for each dev attached to rmrr @@ -1714,9 +1716,10 @@ int __init init_dmars(void) iommu_set_root_entry(iommu); - iommu_flush_context_global(iommu, 0); - iommu_flush_iotlb_global(iommu, 0); - + iommu->flush.flush_context(iommu, 0, 0, 0, DMA_CCMD_GLOBAL_INVL, + 0); + iommu->flush.flush_iotlb(iommu, 0, 0, 0, DMA_TLB_GLOBAL_FLUSH, + 0); iommu_disable_protect_mem_regions(iommu); ret = iommu_enable_translation(iommu); @@ -1738,8 +1741,8 @@ error: static inline u64 aligned_size(u64 host_addr, size_t size) { u64 addr; - addr = (host_addr & (~PAGE_MASK_4K)) + size; - return PAGE_ALIGN_4K(addr); + addr = (host_addr & (~PAGE_MASK)) + size; + return PAGE_ALIGN(addr); } struct iova * @@ -1753,20 +1756,20 @@ iommu_alloc_iova(struct dmar_domain *domain, size_t size, u64 end) return NULL; piova = alloc_iova(&domain->iovad, - size >> PAGE_SHIFT_4K, IOVA_PFN(end), 1); + size >> PAGE_SHIFT, IOVA_PFN(end), 1); return piova; } static struct iova * __intel_alloc_iova(struct device *dev, struct dmar_domain *domain, - size_t size) + size_t size, u64 dma_mask) { struct pci_dev *pdev = to_pci_dev(dev); struct iova *iova = NULL; - if ((pdev->dma_mask <= DMA_32BIT_MASK) || (dmar_forcedac)) { - iova = iommu_alloc_iova(domain, size, pdev->dma_mask); - } else { + if (dma_mask <= DMA_32BIT_MASK || dmar_forcedac) + iova = iommu_alloc_iova(domain, size, dma_mask); + else { /* * First try to allocate an io virtual address in * DMA_32BIT_MASK and if that fails then try allocating @@ -1774,7 +1777,7 @@ __intel_alloc_iova(struct device *dev, struct dmar_domain *domain, */ iova = iommu_alloc_iova(domain, size, DMA_32BIT_MASK); if (!iova) - iova = iommu_alloc_iova(domain, size, pdev->dma_mask); + iova = iommu_alloc_iova(domain, size, dma_mask); } if (!iova) { @@ -1813,12 +1816,12 @@ get_valid_domain_for_dev(struct pci_dev *pdev) return domain; } -static dma_addr_t -intel_map_single(struct device *hwdev, phys_addr_t paddr, size_t size, int dir) +static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr, + size_t size, int dir, u64 dma_mask) { struct pci_dev *pdev = to_pci_dev(hwdev); struct dmar_domain *domain; - unsigned long start_paddr; + phys_addr_t start_paddr; struct iova *iova; int prot = 0; int ret; @@ -1833,11 +1836,11 @@ intel_map_single(struct device *hwdev, phys_addr_t paddr, size_t size, int dir) size = aligned_size((u64)paddr, size); - iova = __intel_alloc_iova(hwdev, domain, size); + iova = __intel_alloc_iova(hwdev, domain, size, pdev->dma_mask); if (!iova) goto error; - start_paddr = iova->pfn_lo << PAGE_SHIFT_4K; + start_paddr = (phys_addr_t)iova->pfn_lo << PAGE_SHIFT; /* * Check if DMAR supports zero-length reads on write only @@ -1855,30 +1858,33 @@ intel_map_single(struct device *hwdev, phys_addr_t paddr, size_t size, int dir) * is not a big problem */ ret = domain_page_mapping(domain, start_paddr, - ((u64)paddr) & PAGE_MASK_4K, size, prot); + ((u64)paddr) & PAGE_MASK, size, prot); if (ret) goto error; - pr_debug("Device %s request: %lx@%llx mapping: %lx@%llx, dir %d\n", - pci_name(pdev), size, (u64)paddr, - size, (u64)start_paddr, dir); - /* it's a non-present to present mapping */ ret = iommu_flush_iotlb_psi(domain->iommu, domain->id, - start_paddr, size >> PAGE_SHIFT_4K, 1); + start_paddr, size >> VTD_PAGE_SHIFT, 1); if (ret) iommu_flush_write_buffer(domain->iommu); - return (start_paddr + ((u64)paddr & (~PAGE_MASK_4K))); + return start_paddr + ((u64)paddr & (~PAGE_MASK)); error: if (iova) __free_iova(&domain->iovad, iova); printk(KERN_ERR"Device %s request: %lx@%llx dir %d --- failed\n", - pci_name(pdev), size, (u64)paddr, dir); + pci_name(pdev), size, (unsigned long long)paddr, dir); return 0; } +dma_addr_t intel_map_single(struct device *hwdev, phys_addr_t paddr, + size_t size, int dir) +{ + return __intel_map_single(hwdev, paddr, size, dir, + to_pci_dev(hwdev)->dma_mask); +} + static void flush_unmaps(void) { int i, j; @@ -1891,7 +1897,8 @@ static void flush_unmaps(void) struct intel_iommu *iommu = deferred_flush[i].domain[0]->iommu; - iommu_flush_iotlb_global(iommu, 0); + iommu->flush.flush_iotlb(iommu, 0, 0, 0, + DMA_TLB_GLOBAL_FLUSH, 0); for (j = 0; j < deferred_flush[i].next; j++) { __free_iova(&deferred_flush[i].domain[j]->iovad, deferred_flush[i].iova[j]); @@ -1936,8 +1943,8 @@ static void add_unmap(struct dmar_domain *dom, struct iova *iova) spin_unlock_irqrestore(&async_umap_flush_lock, flags); } -static void intel_unmap_single(struct device *dev, dma_addr_t dev_addr, - size_t size, int dir) +void intel_unmap_single(struct device *dev, dma_addr_t dev_addr, size_t size, + int dir) { struct pci_dev *pdev = to_pci_dev(dev); struct dmar_domain *domain; @@ -1953,11 +1960,11 @@ static void intel_unmap_single(struct device *dev, dma_addr_t dev_addr, if (!iova) return; - start_addr = iova->pfn_lo << PAGE_SHIFT_4K; + start_addr = iova->pfn_lo << PAGE_SHIFT; size = aligned_size((u64)dev_addr, size); pr_debug("Device %s unmapping: %lx@%llx\n", - pci_name(pdev), size, (u64)start_addr); + pci_name(pdev), size, (unsigned long long)start_addr); /* clear the whole page */ dma_pte_clear_range(domain, start_addr, start_addr + size); @@ -1965,7 +1972,7 @@ static void intel_unmap_single(struct device *dev, dma_addr_t dev_addr, dma_pte_free_pagetable(domain, start_addr, start_addr + size); if (intel_iommu_strict) { if (iommu_flush_iotlb_psi(domain->iommu, - domain->id, start_addr, size >> PAGE_SHIFT_4K, 0)) + domain->id, start_addr, size >> VTD_PAGE_SHIFT, 0)) iommu_flush_write_buffer(domain->iommu); /* free iova */ __free_iova(&domain->iovad, iova); @@ -1978,13 +1985,13 @@ static void intel_unmap_single(struct device *dev, dma_addr_t dev_addr, } } -static void * intel_alloc_coherent(struct device *hwdev, size_t size, - dma_addr_t *dma_handle, gfp_t flags) +void *intel_alloc_coherent(struct device *hwdev, size_t size, + dma_addr_t *dma_handle, gfp_t flags) { void *vaddr; int order; - size = PAGE_ALIGN_4K(size); + size = PAGE_ALIGN(size); order = get_order(size); flags &= ~(GFP_DMA | GFP_DMA32); @@ -1993,19 +2000,21 @@ static void * intel_alloc_coherent(struct device *hwdev, size_t size, return NULL; memset(vaddr, 0, size); - *dma_handle = intel_map_single(hwdev, virt_to_bus(vaddr), size, DMA_BIDIRECTIONAL); + *dma_handle = __intel_map_single(hwdev, virt_to_bus(vaddr), size, + DMA_BIDIRECTIONAL, + hwdev->coherent_dma_mask); if (*dma_handle) return vaddr; free_pages((unsigned long)vaddr, order); return NULL; } -static void intel_free_coherent(struct device *hwdev, size_t size, - void *vaddr, dma_addr_t dma_handle) +void intel_free_coherent(struct device *hwdev, size_t size, void *vaddr, + dma_addr_t dma_handle) { int order; - size = PAGE_ALIGN_4K(size); + size = PAGE_ALIGN(size); order = get_order(size); intel_unmap_single(hwdev, dma_handle, size, DMA_BIDIRECTIONAL); @@ -2013,8 +2022,9 @@ static void intel_free_coherent(struct device *hwdev, size_t size, } #define SG_ENT_VIRT_ADDRESS(sg) (sg_virt((sg))) -static void intel_unmap_sg(struct device *hwdev, struct scatterlist *sglist, - int nelems, int dir) + +void intel_unmap_sg(struct device *hwdev, struct scatterlist *sglist, + int nelems, int dir) { int i; struct pci_dev *pdev = to_pci_dev(hwdev); @@ -2038,7 +2048,7 @@ static void intel_unmap_sg(struct device *hwdev, struct scatterlist *sglist, size += aligned_size((u64)addr, sg->length); } - start_addr = iova->pfn_lo << PAGE_SHIFT_4K; + start_addr = iova->pfn_lo << PAGE_SHIFT; /* clear the whole page */ dma_pte_clear_range(domain, start_addr, start_addr + size); @@ -2046,7 +2056,7 @@ static void intel_unmap_sg(struct device *hwdev, struct scatterlist *sglist, dma_pte_free_pagetable(domain, start_addr, start_addr + size); if (iommu_flush_iotlb_psi(domain->iommu, domain->id, start_addr, - size >> PAGE_SHIFT_4K, 0)) + size >> VTD_PAGE_SHIFT, 0)) iommu_flush_write_buffer(domain->iommu); /* free iova */ @@ -2067,8 +2077,8 @@ static int intel_nontranslate_map_sg(struct device *hddev, return nelems; } -static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, - int nelems, int dir) +int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int nelems, + int dir) { void *addr; int i; @@ -2096,7 +2106,7 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, size += aligned_size((u64)addr, sg->length); } - iova = __intel_alloc_iova(hwdev, domain, size); + iova = __intel_alloc_iova(hwdev, domain, size, pdev->dma_mask); if (!iova) { sglist->dma_length = 0; return 0; @@ -2112,14 +2122,14 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) prot |= DMA_PTE_WRITE; - start_addr = iova->pfn_lo << PAGE_SHIFT_4K; + start_addr = iova->pfn_lo << PAGE_SHIFT; offset = 0; for_each_sg(sglist, sg, nelems, i) { addr = SG_ENT_VIRT_ADDRESS(sg); addr = (void *)virt_to_phys(addr); size = aligned_size((u64)addr, sg->length); ret = domain_page_mapping(domain, start_addr + offset, - ((u64)addr) & PAGE_MASK_4K, + ((u64)addr) & PAGE_MASK, size, prot); if (ret) { /* clear the page */ @@ -2133,14 +2143,14 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, return 0; } sg->dma_address = start_addr + offset + - ((u64)addr & (~PAGE_MASK_4K)); + ((u64)addr & (~PAGE_MASK)); sg->dma_length = sg->length; offset += size; } /* it's a non-present to present mapping */ if (iommu_flush_iotlb_psi(domain->iommu, domain->id, - start_addr, offset >> PAGE_SHIFT_4K, 1)) + start_addr, offset >> VTD_PAGE_SHIFT, 1)) iommu_flush_write_buffer(domain->iommu); return nelems; } @@ -2180,7 +2190,6 @@ static inline int iommu_devinfo_cache_init(void) sizeof(struct device_domain_info), 0, SLAB_HWCACHE_ALIGN, - NULL); if (!iommu_devinfo_cache) { printk(KERN_ERR "Couldn't create devinfo cache\n"); @@ -2198,7 +2207,6 @@ static inline int iommu_iova_cache_init(void) sizeof(struct iova), 0, SLAB_HWCACHE_ALIGN, - NULL); if (!iommu_iova_cache) { printk(KERN_ERR "Couldn't create iova cache\n"); @@ -2327,7 +2335,7 @@ void intel_iommu_domain_exit(struct dmar_domain *domain) return; end = DOMAIN_MAX_ADDR(domain->gaw); - end = end & (~PAGE_MASK_4K); + end = end & (~VTD_PAGE_MASK); /* clear ptes */ dma_pte_clear_range(domain, 0, end); @@ -2423,6 +2431,6 @@ u64 intel_iommu_iova_to_pfn(struct dmar_domain *domain, u64 iova) if (pte) pfn = dma_pte_addr(*pte); - return pfn >> PAGE_SHIFT_4K; + return pfn >> VTD_PAGE_SHIFT; } EXPORT_SYMBOL_GPL(intel_iommu_iova_to_pfn); diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index d2812013fd22..74801f7df9c9 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -759,3 +759,24 @@ void pci_msi_init_pci_dev(struct pci_dev *dev) { INIT_LIST_HEAD(&dev->msi_list); } + +#ifdef CONFIG_ACPI +#include <linux/acpi.h> +#include <linux/pci-acpi.h> +static void __devinit msi_acpi_init(void) +{ + if (acpi_pci_disabled) + return; + pci_osc_support_set(OSC_MSI_SUPPORT); + pcie_osc_support_set(OSC_MSI_SUPPORT); +} +#else +static inline void msi_acpi_init(void) { } +#endif /* CONFIG_ACPI */ + +void __devinit msi_init(void) +{ + if (!pci_msi_enable) + return; + msi_acpi_init(); +} diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index 89a2f0fa10f9..dfe7c8e1b185 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -24,17 +24,17 @@ struct acpi_osc_data { acpi_handle handle; u32 support_set; u32 control_set; - int is_queried; - u32 query_result; struct list_head sibiling; }; static LIST_HEAD(acpi_osc_data_list); struct acpi_osc_args { u32 capbuf[3]; - u32 query_result; + u32 ctrl_result; }; +static DEFINE_MUTEX(pci_acpi_lock); + static struct acpi_osc_data *acpi_get_osc_data(acpi_handle handle) { struct acpi_osc_data *data; @@ -108,9 +108,8 @@ static acpi_status acpi_run_osc(acpi_handle handle, goto out_kfree; } out_success: - if (flags & OSC_QUERY_ENABLE) - osc_args->query_result = - *((u32 *)(out_obj->buffer.pointer + 8)); + osc_args->ctrl_result = + *((u32 *)(out_obj->buffer.pointer + 8)); status = AE_OK; out_kfree: @@ -118,41 +117,53 @@ out_kfree: return status; } -static acpi_status acpi_query_osc(acpi_handle handle, - u32 level, void *context, void **retval) +static acpi_status __acpi_query_osc(u32 flags, struct acpi_osc_data *osc_data, + u32 *result) { acpi_status status; - struct acpi_osc_data *osc_data; - u32 flags = (unsigned long)context, support_set; - acpi_handle tmp; + u32 support_set; struct acpi_osc_args osc_args; - status = acpi_get_handle(handle, "_OSC", &tmp); - if (ACPI_FAILURE(status)) - return status; - - osc_data = acpi_get_osc_data(handle); - if (!osc_data) { - printk(KERN_ERR "acpi osc data array is full\n"); - return AE_ERROR; - } - /* do _OSC query for all possible controls */ support_set = osc_data->support_set | (flags & OSC_SUPPORT_MASKS); osc_args.capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE; osc_args.capbuf[OSC_SUPPORT_TYPE] = support_set; osc_args.capbuf[OSC_CONTROL_TYPE] = OSC_CONTROL_MASKS; - status = acpi_run_osc(handle, &osc_args); + status = acpi_run_osc(osc_data->handle, &osc_args); if (ACPI_SUCCESS(status)) { osc_data->support_set = support_set; - osc_data->query_result = osc_args.query_result; - osc_data->is_queried = 1; + *result = osc_args.ctrl_result; } return status; } +static acpi_status acpi_query_osc(acpi_handle handle, + u32 level, void *context, void **retval) +{ + acpi_status status; + struct acpi_osc_data *osc_data; + u32 flags = (unsigned long)context, dummy; + acpi_handle tmp; + + status = acpi_get_handle(handle, "_OSC", &tmp); + if (ACPI_FAILURE(status)) + return AE_OK; + + mutex_lock(&pci_acpi_lock); + osc_data = acpi_get_osc_data(handle); + if (!osc_data) { + printk(KERN_ERR "acpi osc data array is full\n"); + goto out; + } + + __acpi_query_osc(flags, osc_data, &dummy); +out: + mutex_unlock(&pci_acpi_lock); + return AE_OK; +} + /** * __pci_osc_support_set - register OS support to Firmware * @flags: OS support bits @@ -181,7 +192,7 @@ acpi_status __pci_osc_support_set(u32 flags, const char *hid) acpi_status pci_osc_control_set(acpi_handle handle, u32 flags) { acpi_status status; - u32 ctrlset, control_set; + u32 ctrlset, control_set, result; acpi_handle tmp; struct acpi_osc_data *osc_data; struct acpi_osc_args osc_args; @@ -190,19 +201,28 @@ acpi_status pci_osc_control_set(acpi_handle handle, u32 flags) if (ACPI_FAILURE(status)) return status; + mutex_lock(&pci_acpi_lock); osc_data = acpi_get_osc_data(handle); if (!osc_data) { printk(KERN_ERR "acpi osc data array is full\n"); - return AE_ERROR; + status = AE_ERROR; + goto out; } ctrlset = (flags & OSC_CONTROL_MASKS); - if (!ctrlset) - return AE_TYPE; + if (!ctrlset) { + status = AE_TYPE; + goto out; + } - if (osc_data->is_queried && - ((osc_data->query_result & ctrlset) != ctrlset)) - return AE_SUPPORT; + status = __acpi_query_osc(osc_data->support_set, osc_data, &result); + if (ACPI_FAILURE(status)) + goto out; + + if ((result & ctrlset) != ctrlset) { + status = AE_SUPPORT; + goto out; + } control_set = osc_data->control_set | ctrlset; osc_args.capbuf[OSC_QUERY_TYPE] = 0; @@ -211,7 +231,8 @@ acpi_status pci_osc_control_set(acpi_handle handle, u32 flags) status = acpi_run_osc(handle, &osc_args); if (ACPI_SUCCESS(status)) osc_data->control_set = control_set; - +out: + mutex_unlock(&pci_acpi_lock); return status; } EXPORT_SYMBOL(pci_osc_control_set); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 4db261e13e69..533aeb5fcbe4 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -18,6 +18,7 @@ #include <linux/log2.h> #include <linux/pci-aspm.h> #include <linux/pm_wakeup.h> +#include <linux/interrupt.h> #include <asm/dma.h> /* isa_dma_bridge_buggy */ #include "pci.h" @@ -1746,6 +1747,103 @@ EXPORT_SYMBOL(pci_set_dma_seg_boundary); #endif /** + * pci_execute_reset_function() - Reset a PCI device function + * @dev: Device function to reset + * + * Some devices allow an individual function to be reset without affecting + * other functions in the same device. The PCI device must be responsive + * to PCI config space in order to use this function. + * + * The device function is presumed to be unused when this function is called. + * Resetting the device will make the contents of PCI configuration space + * random, so any caller of this must be prepared to reinitialise the + * device including MSI, bus mastering, BARs, decoding IO and memory spaces, + * etc. + * + * Returns 0 if the device function was successfully reset or -ENOTTY if the + * device doesn't support resetting a single function. + */ +int pci_execute_reset_function(struct pci_dev *dev) +{ + u16 status; + u32 cap; + int exppos = pci_find_capability(dev, PCI_CAP_ID_EXP); + + if (!exppos) + return -ENOTTY; + pci_read_config_dword(dev, exppos + PCI_EXP_DEVCAP, &cap); + if (!(cap & PCI_EXP_DEVCAP_FLR)) + return -ENOTTY; + + pci_block_user_cfg_access(dev); + + /* Wait for Transaction Pending bit clean */ + msleep(100); + pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status); + if (status & PCI_EXP_DEVSTA_TRPND) { + dev_info(&dev->dev, "Busy after 100ms while trying to reset; " + "sleeping for 1 second\n"); + ssleep(1); + pci_read_config_word(dev, exppos + PCI_EXP_DEVSTA, &status); + if (status & PCI_EXP_DEVSTA_TRPND) + dev_info(&dev->dev, "Still busy after 1s; " + "proceeding with reset anyway\n"); + } + + pci_write_config_word(dev, exppos + PCI_EXP_DEVCTL, + PCI_EXP_DEVCTL_BCR_FLR); + mdelay(100); + + pci_unblock_user_cfg_access(dev); + return 0; +} +EXPORT_SYMBOL_GPL(pci_execute_reset_function); + +/** + * pci_reset_function() - quiesce and reset a PCI device function + * @dev: Device function to reset + * + * Some devices allow an individual function to be reset without affecting + * other functions in the same device. The PCI device must be responsive + * to PCI config space in order to use this function. + * + * This function does not just reset the PCI portion of a device, but + * clears all the state associated with the device. This function differs + * from pci_execute_reset_function in that it saves and restores device state + * over the reset. + * + * Returns 0 if the device function was successfully reset or -ENOTTY if the + * device doesn't support resetting a single function. + */ +int pci_reset_function(struct pci_dev *dev) +{ + u32 cap; + int exppos = pci_find_capability(dev, PCI_CAP_ID_EXP); + int r; + + if (!exppos) + return -ENOTTY; + pci_read_config_dword(dev, exppos + PCI_EXP_DEVCAP, &cap); + if (!(cap & PCI_EXP_DEVCAP_FLR)) + return -ENOTTY; + + if (!dev->msi_enabled && !dev->msix_enabled) + disable_irq(dev->irq); + pci_save_state(dev); + + pci_write_config_word(dev, PCI_COMMAND, PCI_COMMAND_INTX_DISABLE); + + r = pci_execute_reset_function(dev); + + pci_restore_state(dev); + if (!dev->msi_enabled && !dev->msix_enabled) + enable_irq(dev->irq); + + return r; +} +EXPORT_SYMBOL_GPL(pci_reset_function); + +/** * pcix_get_max_mmrbc - get PCI-X maximum designed memory read byte count * @dev: PCI device to query * @@ -1933,6 +2031,9 @@ static int __devinit pci_init(void) while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) { pci_fixup_device(pci_fixup_final, dev); } + + msi_init(); + return 0; } diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index b205ab866a1d..9de87e9f98f5 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -98,9 +98,11 @@ extern unsigned int pci_pm_d3_delay; #ifdef CONFIG_PCI_MSI void pci_no_msi(void); extern void pci_msi_init_pci_dev(struct pci_dev *dev); +extern void __devinit msi_init(void); #else static inline void pci_no_msi(void) { } static inline void pci_msi_init_pci_dev(struct pci_dev *dev) { } +static inline void msi_init(void) { } #endif #ifdef CONFIG_PCIEAER diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index aaaf0a1fed22..6f1e51d77bce 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -480,19 +480,27 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, int is_cardbus = (dev->hdr_type == PCI_HEADER_TYPE_CARDBUS); u32 buses, i, j = 0; u16 bctl; + int broken = 0; pci_read_config_dword(dev, PCI_PRIMARY_BUS, &buses); dev_dbg(&dev->dev, "scanning behind bridge, config %06x, pass %d\n", buses & 0xffffff, pass); + /* Check if setup is sensible at all */ + if (!pass && + ((buses & 0xff) != bus->number || ((buses >> 8) & 0xff) <= bus->number)) { + dev_dbg(&dev->dev, "bus configuration invalid, reconfiguring\n"); + broken = 1; + } + /* Disable MasterAbortMode during probing to avoid reporting of bus errors (in some architectures) */ pci_read_config_word(dev, PCI_BRIDGE_CONTROL, &bctl); pci_write_config_word(dev, PCI_BRIDGE_CONTROL, bctl & ~PCI_BRIDGE_CTL_MASTER_ABORT); - if ((buses & 0xffff00) && !pcibios_assign_all_busses() && !is_cardbus) { + if ((buses & 0xffff00) && !pcibios_assign_all_busses() && !is_cardbus && !broken) { unsigned int cmax, busnr; /* * Bus already configured by firmware, process it in the first @@ -530,7 +538,7 @@ int __devinit pci_scan_bridge(struct pci_bus *bus, struct pci_dev *dev, int max, * do in the second pass. */ if (!pass) { - if (pcibios_assign_all_busses()) + if (pcibios_assign_all_busses() || broken) /* Temporarily disable forwarding of the configuration cycles on all bridges in this bus segment to avoid possible diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index bbf66ea8fd87..96cf8ecd04ce 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -43,6 +43,20 @@ static void __devinit quirk_mellanox_tavor(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR,quirk_mellanox_tavor); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_MELLANOX,PCI_DEVICE_ID_MELLANOX_TAVOR_BRIDGE,quirk_mellanox_tavor); +/* Many VIA bridges seem to corrupt data for DAC. Disable it here */ +int forbid_dac __read_mostly; +EXPORT_SYMBOL(forbid_dac); + +static __devinit void via_no_dac(struct pci_dev *dev) +{ + if ((dev->class >> 8) == PCI_CLASS_BRIDGE_PCI && forbid_dac == 0) { + dev_info(&dev->dev, + "VIA PCI bridge detected. Disabling DAC.\n"); + forbid_dac = 1; + } +} +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_ANY_ID, via_no_dac); + /* Deal with broken BIOS'es that neglect to enable passive release, which can cause problems in combination with the 82441FX/PPro MTRRs */ static void quirk_passive_release(struct pci_dev *dev) diff --git a/drivers/pci/search.c b/drivers/pci/search.c index 4edfc4731bd4..5af8bd538149 100644 --- a/drivers/pci/search.c +++ b/drivers/pci/search.c @@ -166,6 +166,7 @@ struct pci_dev *pci_find_device(unsigned int vendor, unsigned int device, { struct pci_dev *pdev; + pci_dev_get(from); pdev = pci_get_subsys(vendor, device, PCI_ANY_ID, PCI_ANY_ID, from); pci_dev_put(pdev); return pdev; @@ -270,12 +271,8 @@ static struct pci_dev *pci_get_dev_by_id(const struct pci_device_id *id, struct pci_dev *pdev = NULL; WARN_ON(in_interrupt()); - if (from) { - /* FIXME - * take the cast off, when bus_find_device is made const. - */ - dev_start = (struct device *)&from->dev; - } + if (from) + dev_start = &from->dev; dev = bus_find_device(&pci_bus_type, dev_start, (void *)id, match_pci_dev_by_id); if (dev) diff --git a/drivers/pci/slot.c b/drivers/pci/slot.c index 0c6db03698ea..4dd1c3e157ae 100644 --- a/drivers/pci/slot.c +++ b/drivers/pci/slot.c @@ -78,18 +78,100 @@ static struct kobj_type pci_slot_ktype = { .default_attrs = pci_slot_default_attrs, }; +static char *make_slot_name(const char *name) +{ + char *new_name; + int len, max, dup; + + new_name = kstrdup(name, GFP_KERNEL); + if (!new_name) + return NULL; + + /* + * Make sure we hit the realloc case the first time through the + * loop. 'len' will be strlen(name) + 3 at that point which is + * enough space for "name-X" and the trailing NUL. + */ + len = strlen(name) + 2; + max = 1; + dup = 1; + + for (;;) { + struct kobject *dup_slot; + dup_slot = kset_find_obj(pci_slots_kset, new_name); + if (!dup_slot) + break; + kobject_put(dup_slot); + if (dup == max) { + len++; + max *= 10; + kfree(new_name); + new_name = kmalloc(len, GFP_KERNEL); + if (!new_name) + break; + } + sprintf(new_name, "%s-%d", name, dup++); + } + + return new_name; +} + +static int rename_slot(struct pci_slot *slot, const char *name) +{ + int result = 0; + char *slot_name; + + if (strcmp(pci_slot_name(slot), name) == 0) + return result; + + slot_name = make_slot_name(name); + if (!slot_name) + return -ENOMEM; + + result = kobject_rename(&slot->kobj, slot_name); + kfree(slot_name); + + return result; +} + +static struct pci_slot *get_slot(struct pci_bus *parent, int slot_nr) +{ + struct pci_slot *slot; + /* + * We already hold pci_bus_sem so don't worry + */ + list_for_each_entry(slot, &parent->slots, list) + if (slot->number == slot_nr) { + kobject_get(&slot->kobj); + return slot; + } + + return NULL; +} + /** * pci_create_slot - create or increment refcount for physical PCI slot * @parent: struct pci_bus of parent bridge * @slot_nr: PCI_SLOT(pci_dev->devfn) or -1 for placeholder * @name: user visible string presented in /sys/bus/pci/slots/<name> + * @hotplug: set if caller is hotplug driver, NULL otherwise * * PCI slots have first class attributes such as address, speed, width, * and a &struct pci_slot is used to manage them. This interface will * either return a new &struct pci_slot to the caller, or if the pci_slot * already exists, its refcount will be incremented. * - * Slots are uniquely identified by a @pci_bus, @slot_nr, @name tuple. + * Slots are uniquely identified by a @pci_bus, @slot_nr tuple. + * + * There are known platforms with broken firmware that assign the same + * name to multiple slots. Workaround these broken platforms by renaming + * the slots on behalf of the caller. If firmware assigns name N to + * multiple slots: + * + * The first slot is assigned N + * The second slot is assigned N-1 + * The third slot is assigned N-2 + * etc. * * Placeholder slots: * In most cases, @pci_bus, @slot_nr will be sufficient to uniquely identify @@ -98,61 +180,67 @@ static struct kobj_type pci_slot_ktype = { * the slot. In this scenario, the caller may pass -1 for @slot_nr. * * The following semantics are imposed when the caller passes @slot_nr == - * -1. First, the check for existing %struct pci_slot is skipped, as the - * caller may know about several unpopulated slots on a given %struct - * pci_bus, and each slot would have a @slot_nr of -1. Uniqueness for - * these slots is then determined by the @name parameter. We expect - * kobject_init_and_add() to warn us if the caller attempts to create - * multiple slots with the same name. The other change in semantics is + * -1. First, we no longer check for an existing %struct pci_slot, as there + * may be many slots with @slot_nr of -1. The other change in semantics is * user-visible, which is the 'address' parameter presented in sysfs will * consist solely of a dddd:bb tuple, where dddd is the PCI domain of the * %struct pci_bus and bb is the bus number. In other words, the devfn of * the 'placeholder' slot will not be displayed. */ - struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr, - const char *name) + const char *name, + struct hotplug_slot *hotplug) { struct pci_dev *dev; struct pci_slot *slot; - int err; + int err = 0; + char *slot_name = NULL; down_write(&pci_bus_sem); if (slot_nr == -1) goto placeholder; - /* If we've already created this slot, bump refcount and return. */ - list_for_each_entry(slot, &parent->slots, list) { - if (slot->number == slot_nr) { - kobject_get(&slot->kobj); - pr_debug("%s: inc refcount to %d on %04x:%02x:%02x\n", - __func__, - atomic_read(&slot->kobj.kref.refcount), - pci_domain_nr(parent), parent->number, - slot_nr); - goto out; + /* + * Hotplug drivers are allowed to rename an existing slot, + * but only if not already claimed. + */ + slot = get_slot(parent, slot_nr); + if (slot) { + if (hotplug) { + if ((err = slot->hotplug ? -EBUSY : 0) + || (err = rename_slot(slot, name))) { + kobject_put(&slot->kobj); + slot = NULL; + goto err; + } } + goto out; } placeholder: slot = kzalloc(sizeof(*slot), GFP_KERNEL); if (!slot) { - slot = ERR_PTR(-ENOMEM); - goto out; + err = -ENOMEM; + goto err; } slot->bus = parent; slot->number = slot_nr; slot->kobj.kset = pci_slots_kset; - err = kobject_init_and_add(&slot->kobj, &pci_slot_ktype, NULL, - "%s", name); - if (err) { - printk(KERN_ERR "Unable to register kobject %s\n", name); + + slot_name = make_slot_name(name); + if (!slot_name) { + err = -ENOMEM; goto err; } + err = kobject_init_and_add(&slot->kobj, &pci_slot_ktype, NULL, + "%s", slot_name); + if (err) + goto err; + INIT_LIST_HEAD(&slot->list); list_add(&slot->list, &parent->slots); @@ -164,10 +252,10 @@ placeholder: pr_debug("%s: created pci_slot on %04x:%02x:%02x\n", __func__, pci_domain_nr(parent), parent->number, slot_nr); - out: +out: up_write(&pci_bus_sem); return slot; - err: +err: kfree(slot); slot = ERR_PTR(err); goto out; @@ -175,7 +263,7 @@ placeholder: EXPORT_SYMBOL_GPL(pci_create_slot); /** - * pci_update_slot_number - update %struct pci_slot -> number + * pci_renumber_slot - update %struct pci_slot -> number * @slot - %struct pci_slot to update * @slot_nr - new number for slot * @@ -183,27 +271,22 @@ EXPORT_SYMBOL_GPL(pci_create_slot); * created a placeholder slot in pci_create_slot() by passing a -1 as * slot_nr, to update their %struct pci_slot with the correct @slot_nr. */ - -void pci_update_slot_number(struct pci_slot *slot, int slot_nr) +void pci_renumber_slot(struct pci_slot *slot, int slot_nr) { - int name_count = 0; struct pci_slot *tmp; down_write(&pci_bus_sem); list_for_each_entry(tmp, &slot->bus->slots, list) { WARN_ON(tmp->number == slot_nr); - if (!strcmp(kobject_name(&tmp->kobj), kobject_name(&slot->kobj))) - name_count++; + goto out; } - if (name_count > 1) - printk(KERN_WARNING "pci_update_slot_number found %d slots with the same name: %s\n", name_count, kobject_name(&slot->kobj)); - slot->number = slot_nr; +out: up_write(&pci_bus_sem); } -EXPORT_SYMBOL_GPL(pci_update_slot_number); +EXPORT_SYMBOL_GPL(pci_renumber_slot); /** * pci_destroy_slot - decrement refcount for physical PCI slot @@ -213,7 +296,6 @@ EXPORT_SYMBOL_GPL(pci_update_slot_number); * just call kobject_put on its kobj and let our release methods do the * rest. */ - void pci_destroy_slot(struct pci_slot *slot) { pr_debug("%s: dec refcount to %d on %04x:%02x:%02x\n", __func__, diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index b46c60b72708..23e492bf75cf 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -70,7 +70,7 @@ pxa2xx-obj-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o pxa2xx-obj-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o pxa2xx-obj-$(CONFIG_MACH_ARMCORE) += pxa2xx_cm_x2xx_cs.o pxa2xx-obj-$(CONFIG_ARCH_VIPER) += pxa2xx_viper.o -pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps.o +pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps4.o pxa2xx-obj-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o pxa2xx-obj-$(CONFIG_MACH_PALMLD) += pxa2xx_palmld.o diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 814f49fde530..8abbb2020af9 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -171,10 +171,10 @@ config RTC_DRV_MAX6900 will be called rtc-max6900. config RTC_DRV_RS5C372 - tristate "Ricoh RS5C372A/B, RV5C386, RV5C387A" + tristate "Ricoh R2025S/D, RS5C372A/B, RV5C386, RV5C387A" help If you say yes here you get support for the - Ricoh RS5C372A, RS5C372B, RV5C386, and RV5C387A RTC chips. + Ricoh R2025S/D, RS5C372A, RS5C372B, RV5C386, and RV5C387A RTC chips. This driver can also be built as a module. If so, the module will be called rtc-rs5c372. @@ -246,6 +246,16 @@ config RTC_DRV_TWL92330 platforms. The support is integrated with the rest of the Menelaus driver; it's not separate module. +config RTC_DRV_TWL4030 + tristate "TI TWL4030/TWL5030/TPS659x0" + depends on RTC_CLASS && TWL4030_CORE + help + If you say yes here you get support for the RTC on the + TWL4030 family chips, used mostly with OMAP3 platforms. + + This driver can also be built as a module. If so, the module + will be called rtc-twl4030. + config RTC_DRV_S35390A tristate "Seiko Instruments S-35390A" select BITREVERSE diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index d6a9ac7176ea..e9e8474cc8fe 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -63,6 +63,7 @@ obj-$(CONFIG_RTC_DRV_SA1100) += rtc-sa1100.o obj-$(CONFIG_RTC_DRV_SH) += rtc-sh.o obj-$(CONFIG_RTC_DRV_STK17TA8) += rtc-stk17ta8.o obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o +obj-$(CONFIG_RTC_DRV_TWL4030) += rtc-twl4030.o obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl4030.c new file mode 100644 index 000000000000..abe87a4d2665 --- /dev/null +++ b/drivers/rtc/rtc-twl4030.c @@ -0,0 +1,564 @@ +/* + * rtc-twl4030.c -- TWL4030 Real Time Clock interface + * + * Copyright (C) 2007 MontaVista Software, Inc + * Author: Alexandre Rusev <source@mvista.com> + * + * Based on original TI driver twl4030-rtc.c + * Copyright (C) 2006 Texas Instruments, Inc. + * + * Based on rtc-omap.c + * Copyright (C) 2003 MontaVista Software, Inc. + * Author: George G. Davis <gdavis@mvista.com> or <source@mvista.com> + * Copyright (C) 2006 David Brownell + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/rtc.h> +#include <linux/bcd.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> + +#include <linux/i2c/twl4030.h> + + +/* + * RTC block register offsets (use TWL_MODULE_RTC) + */ +#define REG_SECONDS_REG 0x00 +#define REG_MINUTES_REG 0x01 +#define REG_HOURS_REG 0x02 +#define REG_DAYS_REG 0x03 +#define REG_MONTHS_REG 0x04 +#define REG_YEARS_REG 0x05 +#define REG_WEEKS_REG 0x06 + +#define REG_ALARM_SECONDS_REG 0x07 +#define REG_ALARM_MINUTES_REG 0x08 +#define REG_ALARM_HOURS_REG 0x09 +#define REG_ALARM_DAYS_REG 0x0A +#define REG_ALARM_MONTHS_REG 0x0B +#define REG_ALARM_YEARS_REG 0x0C + +#define REG_RTC_CTRL_REG 0x0D +#define REG_RTC_STATUS_REG 0x0E +#define REG_RTC_INTERRUPTS_REG 0x0F + +#define REG_RTC_COMP_LSB_REG 0x10 +#define REG_RTC_COMP_MSB_REG 0x11 + +/* RTC_CTRL_REG bitfields */ +#define BIT_RTC_CTRL_REG_STOP_RTC_M 0x01 +#define BIT_RTC_CTRL_REG_ROUND_30S_M 0x02 +#define BIT_RTC_CTRL_REG_AUTO_COMP_M 0x04 +#define BIT_RTC_CTRL_REG_MODE_12_24_M 0x08 +#define BIT_RTC_CTRL_REG_TEST_MODE_M 0x10 +#define BIT_RTC_CTRL_REG_SET_32_COUNTER_M 0x20 +#define BIT_RTC_CTRL_REG_GET_TIME_M 0x40 + +/* RTC_STATUS_REG bitfields */ +#define BIT_RTC_STATUS_REG_RUN_M 0x02 +#define BIT_RTC_STATUS_REG_1S_EVENT_M 0x04 +#define BIT_RTC_STATUS_REG_1M_EVENT_M 0x08 +#define BIT_RTC_STATUS_REG_1H_EVENT_M 0x10 +#define BIT_RTC_STATUS_REG_1D_EVENT_M 0x20 +#define BIT_RTC_STATUS_REG_ALARM_M 0x40 +#define BIT_RTC_STATUS_REG_POWER_UP_M 0x80 + +/* RTC_INTERRUPTS_REG bitfields */ +#define BIT_RTC_INTERRUPTS_REG_EVERY_M 0x03 +#define BIT_RTC_INTERRUPTS_REG_IT_TIMER_M 0x04 +#define BIT_RTC_INTERRUPTS_REG_IT_ALARM_M 0x08 + + +/* REG_SECONDS_REG through REG_YEARS_REG is how many registers? */ +#define ALL_TIME_REGS 6 + +/*----------------------------------------------------------------------*/ + +/* + * Supports 1 byte read from TWL4030 RTC register. + */ +static int twl4030_rtc_read_u8(u8 *data, u8 reg) +{ + int ret; + + ret = twl4030_i2c_read_u8(TWL4030_MODULE_RTC, data, reg); + if (ret < 0) + pr_err("twl4030_rtc: Could not read TWL4030" + "register %X - error %d\n", reg, ret); + return ret; +} + +/* + * Supports 1 byte write to TWL4030 RTC registers. + */ +static int twl4030_rtc_write_u8(u8 data, u8 reg) +{ + int ret; + + ret = twl4030_i2c_write_u8(TWL4030_MODULE_RTC, data, reg); + if (ret < 0) + pr_err("twl4030_rtc: Could not write TWL4030" + "register %X - error %d\n", reg, ret); + return ret; +} + +/* + * Cache the value for timer/alarm interrupts register; this is + * only changed by callers holding rtc ops lock (or resume). + */ +static unsigned char rtc_irq_bits; + +/* + * Enable timer and/or alarm interrupts. + */ +static int set_rtc_irq_bit(unsigned char bit) +{ + unsigned char val; + int ret; + + val = rtc_irq_bits | bit; + ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG); + if (ret == 0) + rtc_irq_bits = val; + + return ret; +} + +/* + * Disable timer and/or alarm interrupts. + */ +static int mask_rtc_irq_bit(unsigned char bit) +{ + unsigned char val; + int ret; + + val = rtc_irq_bits & ~bit; + ret = twl4030_rtc_write_u8(val, REG_RTC_INTERRUPTS_REG); + if (ret == 0) + rtc_irq_bits = val; + + return ret; +} + +static inline int twl4030_rtc_alarm_irq_set_state(int enabled) +{ + int ret; + + if (enabled) + ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); + else + ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); + + return ret; +} + +static inline int twl4030_rtc_irq_set_state(int enabled) +{ + int ret; + + if (enabled) + ret = set_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); + else + ret = mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); + + return ret; +} + +/* + * Gets current TWL4030 RTC time and date parameters. + * + * The RTC's time/alarm representation is not what gmtime(3) requires + * Linux to use: + * + * - Months are 1..12 vs Linux 0-11 + * - Years are 0..99 vs Linux 1900..N (we assume 21st century) + */ +static int twl4030_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + unsigned char rtc_data[ALL_TIME_REGS + 1]; + int ret; + u8 save_control; + + ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG); + if (ret < 0) + return ret; + + save_control |= BIT_RTC_CTRL_REG_GET_TIME_M; + + ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); + if (ret < 0) + return ret; + + ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data, + REG_SECONDS_REG, ALL_TIME_REGS); + + if (ret < 0) { + dev_err(dev, "rtc_read_time error %d\n", ret); + return ret; + } + + tm->tm_sec = bcd2bin(rtc_data[0]); + tm->tm_min = bcd2bin(rtc_data[1]); + tm->tm_hour = bcd2bin(rtc_data[2]); + tm->tm_mday = bcd2bin(rtc_data[3]); + tm->tm_mon = bcd2bin(rtc_data[4]) - 1; + tm->tm_year = bcd2bin(rtc_data[5]) + 100; + + return ret; +} + +static int twl4030_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + unsigned char save_control; + unsigned char rtc_data[ALL_TIME_REGS + 1]; + int ret; + + rtc_data[1] = bin2bcd(tm->tm_sec); + rtc_data[2] = bin2bcd(tm->tm_min); + rtc_data[3] = bin2bcd(tm->tm_hour); + rtc_data[4] = bin2bcd(tm->tm_mday); + rtc_data[5] = bin2bcd(tm->tm_mon + 1); + rtc_data[6] = bin2bcd(tm->tm_year - 100); + + /* Stop RTC while updating the TC registers */ + ret = twl4030_rtc_read_u8(&save_control, REG_RTC_CTRL_REG); + if (ret < 0) + goto out; + + save_control &= ~BIT_RTC_CTRL_REG_STOP_RTC_M; + twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); + if (ret < 0) + goto out; + + /* update all the time registers in one shot */ + ret = twl4030_i2c_write(TWL4030_MODULE_RTC, rtc_data, + REG_SECONDS_REG, ALL_TIME_REGS); + if (ret < 0) { + dev_err(dev, "rtc_set_time error %d\n", ret); + goto out; + } + + /* Start back RTC */ + save_control |= BIT_RTC_CTRL_REG_STOP_RTC_M; + ret = twl4030_rtc_write_u8(save_control, REG_RTC_CTRL_REG); + +out: + return ret; +} + +/* + * Gets current TWL4030 RTC alarm time. + */ +static int twl4030_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alm) +{ + unsigned char rtc_data[ALL_TIME_REGS + 1]; + int ret; + + ret = twl4030_i2c_read(TWL4030_MODULE_RTC, rtc_data, + REG_ALARM_SECONDS_REG, ALL_TIME_REGS); + if (ret < 0) { + dev_err(dev, "rtc_read_alarm error %d\n", ret); + return ret; + } + + /* some of these fields may be wildcard/"match all" */ + alm->time.tm_sec = bcd2bin(rtc_data[0]); + alm->time.tm_min = bcd2bin(rtc_data[1]); + alm->time.tm_hour = bcd2bin(rtc_data[2]); + alm->time.tm_mday = bcd2bin(rtc_data[3]); + alm->time.tm_mon = bcd2bin(rtc_data[4]) - 1; + alm->time.tm_year = bcd2bin(rtc_data[5]) + 100; + + /* report cached alarm enable state */ + if (rtc_irq_bits & BIT_RTC_INTERRUPTS_REG_IT_ALARM_M) + alm->enabled = 1; + + return ret; +} + +static int twl4030_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alm) +{ + unsigned char alarm_data[ALL_TIME_REGS + 1]; + int ret; + + ret = twl4030_rtc_alarm_irq_set_state(0); + if (ret) + goto out; + + alarm_data[1] = bin2bcd(alm->time.tm_sec); + alarm_data[2] = bin2bcd(alm->time.tm_min); + alarm_data[3] = bin2bcd(alm->time.tm_hour); + alarm_data[4] = bin2bcd(alm->time.tm_mday); + alarm_data[5] = bin2bcd(alm->time.tm_mon + 1); + alarm_data[6] = bin2bcd(alm->time.tm_year - 100); + + /* update all the alarm registers in one shot */ + ret = twl4030_i2c_write(TWL4030_MODULE_RTC, alarm_data, + REG_ALARM_SECONDS_REG, ALL_TIME_REGS); + if (ret) { + dev_err(dev, "rtc_set_alarm error %d\n", ret); + goto out; + } + + if (alm->enabled) + ret = twl4030_rtc_alarm_irq_set_state(1); +out: + return ret; +} + +#ifdef CONFIG_RTC_INTF_DEV + +static int twl4030_rtc_ioctl(struct device *dev, unsigned int cmd, + unsigned long arg) +{ + switch (cmd) { + case RTC_AIE_OFF: + return twl4030_rtc_alarm_irq_set_state(0); + case RTC_AIE_ON: + return twl4030_rtc_alarm_irq_set_state(1); + case RTC_UIE_OFF: + return twl4030_rtc_irq_set_state(0); + case RTC_UIE_ON: + return twl4030_rtc_irq_set_state(1); + + default: + return -ENOIOCTLCMD; + } +} + +#else +#define omap_rtc_ioctl NULL +#endif + +static irqreturn_t twl4030_rtc_interrupt(int irq, void *rtc) +{ + unsigned long events = 0; + int ret = IRQ_NONE; + int res; + u8 rd_reg; + +#ifdef CONFIG_LOCKDEP + /* WORKAROUND for lockdep forcing IRQF_DISABLED on us, which + * we don't want and can't tolerate. Although it might be + * friendlier not to borrow this thread context... + */ + local_irq_enable(); +#endif + + res = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG); + if (res) + goto out; + /* + * Figure out source of interrupt: ALARM or TIMER in RTC_STATUS_REG. + * only one (ALARM or RTC) interrupt source may be enabled + * at time, we also could check our results + * by reading RTS_INTERRUPTS_REGISTER[IT_TIMER,IT_ALARM] + */ + if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M) + events |= RTC_IRQF | RTC_AF; + else + events |= RTC_IRQF | RTC_UF; + + res = twl4030_rtc_write_u8(rd_reg | BIT_RTC_STATUS_REG_ALARM_M, + REG_RTC_STATUS_REG); + if (res) + goto out; + + /* Clear on Read enabled. RTC_IT bit of TWL4030_INT_PWR_ISR1 + * needs 2 reads to clear the interrupt. One read is done in + * do_twl4030_pwrirq(). Doing the second read, to clear + * the bit. + * + * FIXME the reason PWR_ISR1 needs an extra read is that + * RTC_IF retriggered until we cleared REG_ALARM_M above. + * But re-reading like this is a bad hack; by doing so we + * risk wrongly clearing status for some other IRQ (losing + * the interrupt). Be smarter about handling RTC_UF ... + */ + res = twl4030_i2c_read_u8(TWL4030_MODULE_INT, + &rd_reg, TWL4030_INT_PWR_ISR1); + if (res) + goto out; + + /* Notify RTC core on event */ + rtc_update_irq(rtc, 1, events); + + ret = IRQ_HANDLED; +out: + return ret; +} + +static struct rtc_class_ops twl4030_rtc_ops = { + .ioctl = twl4030_rtc_ioctl, + .read_time = twl4030_rtc_read_time, + .set_time = twl4030_rtc_set_time, + .read_alarm = twl4030_rtc_read_alarm, + .set_alarm = twl4030_rtc_set_alarm, +}; + +/*----------------------------------------------------------------------*/ + +static int __devinit twl4030_rtc_probe(struct platform_device *pdev) +{ + struct rtc_device *rtc; + int ret = 0; + int irq = platform_get_irq(pdev, 0); + u8 rd_reg; + + if (irq < 0) + return irq; + + rtc = rtc_device_register(pdev->name, + &pdev->dev, &twl4030_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) { + ret = -EINVAL; + dev_err(&pdev->dev, "can't register RTC device, err %ld\n", + PTR_ERR(rtc)); + goto out0; + + } + + platform_set_drvdata(pdev, rtc); + + ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_STATUS_REG); + + if (ret < 0) + goto out1; + + if (rd_reg & BIT_RTC_STATUS_REG_POWER_UP_M) + dev_warn(&pdev->dev, "Power up reset detected.\n"); + + if (rd_reg & BIT_RTC_STATUS_REG_ALARM_M) + dev_warn(&pdev->dev, "Pending Alarm interrupt detected.\n"); + + /* Clear RTC Power up reset and pending alarm interrupts */ + ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_STATUS_REG); + if (ret < 0) + goto out1; + + ret = request_irq(irq, twl4030_rtc_interrupt, + IRQF_TRIGGER_RISING, + rtc->dev.bus_id, rtc); + if (ret < 0) { + dev_err(&pdev->dev, "IRQ is not free.\n"); + goto out1; + } + + /* Check RTC module status, Enable if it is off */ + ret = twl4030_rtc_read_u8(&rd_reg, REG_RTC_CTRL_REG); + if (ret < 0) + goto out2; + + if (!(rd_reg & BIT_RTC_CTRL_REG_STOP_RTC_M)) { + dev_info(&pdev->dev, "Enabling TWL4030-RTC.\n"); + rd_reg = BIT_RTC_CTRL_REG_STOP_RTC_M; + ret = twl4030_rtc_write_u8(rd_reg, REG_RTC_CTRL_REG); + if (ret < 0) + goto out2; + } + + /* init cached IRQ enable bits */ + ret = twl4030_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG); + if (ret < 0) + goto out2; + + return ret; + + +out2: + free_irq(irq, rtc); +out1: + rtc_device_unregister(rtc); +out0: + return ret; +} + +/* + * Disable all TWL4030 RTC module interrupts. + * Sets status flag to free. + */ +static int __devexit twl4030_rtc_remove(struct platform_device *pdev) +{ + /* leave rtc running, but disable irqs */ + struct rtc_device *rtc = platform_get_drvdata(pdev); + int irq = platform_get_irq(pdev, 0); + + mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); + mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M); + + free_irq(irq, rtc); + + rtc_device_unregister(rtc); + platform_set_drvdata(pdev, NULL); + return 0; +} + +static void twl4030_rtc_shutdown(struct platform_device *pdev) +{ + mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M | + BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); +} + +#ifdef CONFIG_PM + +static unsigned char irqstat; + +static int twl4030_rtc_suspend(struct platform_device *pdev, pm_message_t state) +{ + irqstat = rtc_irq_bits; + + /* REVISIT alarm may need to wake us from sleep */ + mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M | + BIT_RTC_INTERRUPTS_REG_IT_ALARM_M); + return 0; +} + +static int twl4030_rtc_resume(struct platform_device *pdev) +{ + set_rtc_irq_bit(irqstat); + return 0; +} + +#else +#define twl4030_rtc_suspend NULL +#define twl4030_rtc_resume NULL +#endif + +MODULE_ALIAS("platform:twl4030_rtc"); + +static struct platform_driver twl4030rtc_driver = { + .probe = twl4030_rtc_probe, + .remove = __devexit_p(twl4030_rtc_remove), + .shutdown = twl4030_rtc_shutdown, + .suspend = twl4030_rtc_suspend, + .resume = twl4030_rtc_resume, + .driver = { + .owner = THIS_MODULE, + .name = "twl4030_rtc", + }, +}; + +static int __init twl4030_rtc_init(void) +{ + return platform_driver_register(&twl4030rtc_driver); +} +module_init(twl4030_rtc_init); + +static void __exit twl4030_rtc_exit(void) +{ + platform_driver_unregister(&twl4030rtc_driver); +} +module_exit(twl4030_rtc_exit); + +MODULE_AUTHOR("Texas Instruments, MontaVista Software"); +MODULE_LICENSE("GPL"); diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index c014ffb110e9..5450a0e5ecdb 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -1100,6 +1100,8 @@ enum pci_board_num_t { pbn_b0_4_1843200_200, pbn_b0_8_1843200_200, + pbn_b0_1_4000000, + pbn_b0_bt_1_115200, pbn_b0_bt_2_115200, pbn_b0_bt_8_115200, @@ -1167,6 +1169,10 @@ enum pci_board_num_t { pbn_exsys_4055, pbn_plx_romulus, pbn_oxsemi, + pbn_oxsemi_1_4000000, + pbn_oxsemi_2_4000000, + pbn_oxsemi_4_4000000, + pbn_oxsemi_8_4000000, pbn_intel_i960, pbn_sgi_ioc3, pbn_computone_4, @@ -1290,6 +1296,12 @@ static struct pciserial_board pci_boards[] __devinitdata = { .base_baud = 1843200, .uart_offset = 0x200, }, + [pbn_b0_1_4000000] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 4000000, + .uart_offset = 8, + }, [pbn_b0_bt_1_115200] = { .flags = FL_BASE0|FL_BASE_BARS, @@ -1625,6 +1637,35 @@ static struct pciserial_board pci_boards[] __devinitdata = { .base_baud = 115200, .uart_offset = 8, }, + [pbn_oxsemi_1_4000000] = { + .flags = FL_BASE0, + .num_ports = 1, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_oxsemi_2_4000000] = { + .flags = FL_BASE0, + .num_ports = 2, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_oxsemi_4_4000000] = { + .flags = FL_BASE0, + .num_ports = 4, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + [pbn_oxsemi_8_4000000] = { + .flags = FL_BASE0, + .num_ports = 8, + .base_baud = 4000000, + .uart_offset = 0x200, + .first_offset = 0x1000, + }, + /* * EKF addition for i960 Boards form EKF with serial port. @@ -1813,6 +1854,39 @@ serial_pci_matches(struct pciserial_board *board, board->first_offset == guessed->first_offset; } +/* + * Oxford Semiconductor Inc. + * Check that device is part of the Tornado range of devices, then determine + * the number of ports available on the device. + */ +static int pci_oxsemi_tornado_init(struct pci_dev *dev, struct pciserial_board *board) +{ + u8 __iomem *p; + unsigned long deviceID; + unsigned int number_uarts; + + /* OxSemi Tornado devices are all 0xCxxx */ + if (dev->vendor == PCI_VENDOR_ID_OXSEMI && + (dev->device & 0xF000) != 0xC000) + return 0; + + p = pci_iomap(dev, 0, 5); + if (p == NULL) + return -ENOMEM; + + deviceID = ioread32(p); + /* Tornado device */ + if (deviceID == 0x07000200) { + number_uarts = ioread8(p + 4); + board->num_ports = number_uarts; + printk(KERN_DEBUG + "%d ports detected on Oxford PCI Express device\n", + number_uarts); + } + pci_iounmap(dev, p); + return 0; +} + struct serial_private * pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board) { @@ -1821,6 +1895,13 @@ pciserial_init_ports(struct pci_dev *dev, struct pciserial_board *board) struct pci_serial_quirk *quirk; int rc, nr_ports, i; + /* + * Find number of ports on board + */ + if (dev->vendor == PCI_VENDOR_ID_OXSEMI || + dev->vendor == PCI_VENDOR_ID_MAINPINE) + pci_oxsemi_tornado_init(dev, board); + nr_ports = board->num_ports; /* @@ -2301,6 +2382,156 @@ static struct pci_device_id serial_pci_tbl[] = { pbn_b0_bt_2_921600 }, /* + * Oxford Semiconductor Inc. Tornado PCI express device range. + */ + { PCI_VENDOR_ID_OXSEMI, 0xc101, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc105, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc11b, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc11f, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc120, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc124, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc138, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc13d, /* OXPCIe952 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc140, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc141, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc144, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc145, /* OXPCIe952 1 Legacy UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_b0_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc158, /* OXPCIe952 2 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc15d, /* OXPCIe952 2 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc208, /* OXPCIe954 4 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_4_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc20d, /* OXPCIe954 4 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_4_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc308, /* OXPCIe958 8 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_8_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc30d, /* OXPCIe958 8 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_8_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc40b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc40f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc41b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc41f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc42b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc42f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc43b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc43f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc44b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc44f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc45b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc45f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc46b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc46f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc47b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc47f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc48b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc48f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc49b, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc49f, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4ab, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4af, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4bb, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4bf, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4cb, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_OXSEMI, 0xc4cf, /* OXPCIe200 1 Native UART */ + PCI_ANY_ID, PCI_ANY_ID, 0, 0, + pbn_oxsemi_1_4000000 }, + /* + * Mainpine Inc. IQ Express "Rev3" utilizing OxSemi Tornado + */ + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 1 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4001, 0, 0, + pbn_oxsemi_1_4000000 }, + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 2 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4002, 0, 0, + pbn_oxsemi_2_4000000 }, + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 4 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4004, 0, 0, + pbn_oxsemi_4_4000000 }, + { PCI_VENDOR_ID_MAINPINE, 0x4000, /* IQ Express 8 Port V.34 Super-G3 Fax */ + PCI_VENDOR_ID_MAINPINE, 0x4008, 0, 0, + pbn_oxsemi_8_4000000 }, + /* * SBS Technologies, Inc. P-Octal and PMC-OCTPRO cards, * from skokodyn@yahoo.com */ diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index db783b77a881..c94d3c4b7521 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -457,7 +457,7 @@ config SERIAL_SAMSUNG config SERIAL_SAMSUNG_DEBUG bool "Samsung SoC serial debug" - depends on SERIAL_SAMSUNG + depends on SERIAL_SAMSUNG && DEBUG_LL help Add support for debugging the serial driver. Since this is generally being used as a console, we use our own output diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 2a79decd7dfc..c4eff44c9f27 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -43,4 +43,8 @@ source "drivers/staging/echo/Kconfig" source "drivers/staging/at76_usb/Kconfig" +source "drivers/staging/pcc-acpi/Kconfig" + +source "drivers/staging/poch/Kconfig" + endif # STAGING diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 325bca4f71c0..7cb8701d96d4 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -13,3 +13,5 @@ obj-$(CONFIG_W35UND) += winbond/ obj-$(CONFIG_PRISM2_USB) += wlan-ng/ obj-$(CONFIG_ECHO) += echo/ obj-$(CONFIG_USB_ATMEL) += at76_usb/ +obj-$(CONFIG_PCC_ACPI) += pcc-acpi/ +obj-$(CONFIG_POCH) += poch/ diff --git a/drivers/staging/at76_usb/at76_usb.c b/drivers/staging/at76_usb/at76_usb.c index 52df0c665183..174e2bec9223 100644 --- a/drivers/staging/at76_usb/at76_usb.c +++ b/drivers/staging/at76_usb/at76_usb.c @@ -2319,9 +2319,11 @@ static int at76_iw_handler_get_scan(struct net_device *netdev, if (!iwe) return -ENOMEM; - if (priv->scan_state != SCAN_COMPLETED) + if (priv->scan_state != SCAN_COMPLETED) { /* scan not yet finished */ + kfree(iwe); return -EAGAIN; + } spin_lock_irqsave(&priv->bss_list_spinlock, flags); diff --git a/drivers/staging/echo/bit_operations.h b/drivers/staging/echo/bit_operations.h index b32f4bf99397..cecdcf3fd755 100644 --- a/drivers/staging/echo/bit_operations.h +++ b/drivers/staging/echo/bit_operations.h @@ -30,114 +30,98 @@ #if !defined(_BIT_OPERATIONS_H_) #define _BIT_OPERATIONS_H_ -#ifdef __cplusplus -extern "C" { -#endif - #if defined(__i386__) || defined(__x86_64__) /*! \brief Find the bit position of the highest set bit in a word \param bits The word to be searched \return The bit number of the highest set bit, or -1 if the word is zero. */ static __inline__ int top_bit(unsigned int bits) { - int res; - - __asm__ (" xorl %[res],%[res];\n" - " decl %[res];\n" - " bsrl %[bits],%[res]\n" - : [res] "=&r" (res) - : [bits] "rm" (bits)); - return res; + int res; + + __asm__(" xorl %[res],%[res];\n" + " decl %[res];\n" + " bsrl %[bits],%[res]\n" + :[res] "=&r" (res) + :[bits] "rm"(bits) + ); + return res; } -/*- End of function --------------------------------------------------------*/ /*! \brief Find the bit position of the lowest set bit in a word \param bits The word to be searched \return The bit number of the lowest set bit, or -1 if the word is zero. */ static __inline__ int bottom_bit(unsigned int bits) { - int res; - - __asm__ (" xorl %[res],%[res];\n" - " decl %[res];\n" - " bsfl %[bits],%[res]\n" - : [res] "=&r" (res) - : [bits] "rm" (bits)); - return res; + int res; + + __asm__(" xorl %[res],%[res];\n" + " decl %[res];\n" + " bsfl %[bits],%[res]\n" + :[res] "=&r" (res) + :[bits] "rm"(bits) + ); + return res; } -/*- End of function --------------------------------------------------------*/ #else static __inline__ int top_bit(unsigned int bits) { - int i; - - if (bits == 0) - return -1; - i = 0; - if (bits & 0xFFFF0000) - { - bits &= 0xFFFF0000; - i += 16; - } - if (bits & 0xFF00FF00) - { - bits &= 0xFF00FF00; - i += 8; - } - if (bits & 0xF0F0F0F0) - { - bits &= 0xF0F0F0F0; - i += 4; - } - if (bits & 0xCCCCCCCC) - { - bits &= 0xCCCCCCCC; - i += 2; - } - if (bits & 0xAAAAAAAA) - { - bits &= 0xAAAAAAAA; - i += 1; - } - return i; + int i; + + if (bits == 0) + return -1; + i = 0; + if (bits & 0xFFFF0000) { + bits &= 0xFFFF0000; + i += 16; + } + if (bits & 0xFF00FF00) { + bits &= 0xFF00FF00; + i += 8; + } + if (bits & 0xF0F0F0F0) { + bits &= 0xF0F0F0F0; + i += 4; + } + if (bits & 0xCCCCCCCC) { + bits &= 0xCCCCCCCC; + i += 2; + } + if (bits & 0xAAAAAAAA) { + bits &= 0xAAAAAAAA; + i += 1; + } + return i; } -/*- End of function --------------------------------------------------------*/ static __inline__ int bottom_bit(unsigned int bits) { - int i; - - if (bits == 0) - return -1; - i = 32; - if (bits & 0x0000FFFF) - { - bits &= 0x0000FFFF; - i -= 16; - } - if (bits & 0x00FF00FF) - { - bits &= 0x00FF00FF; - i -= 8; - } - if (bits & 0x0F0F0F0F) - { - bits &= 0x0F0F0F0F; - i -= 4; - } - if (bits & 0x33333333) - { - bits &= 0x33333333; - i -= 2; - } - if (bits & 0x55555555) - { - bits &= 0x55555555; - i -= 1; - } - return i; + int i; + + if (bits == 0) + return -1; + i = 32; + if (bits & 0x0000FFFF) { + bits &= 0x0000FFFF; + i -= 16; + } + if (bits & 0x00FF00FF) { + bits &= 0x00FF00FF; + i -= 8; + } + if (bits & 0x0F0F0F0F) { + bits &= 0x0F0F0F0F; + i -= 4; + } + if (bits & 0x33333333) { + bits &= 0x33333333; + i -= 2; + } + if (bits & 0x55555555) { + bits &= 0x55555555; + i -= 1; + } + return i; } -/*- End of function --------------------------------------------------------*/ #endif /*! \brief Bit reverse a byte. @@ -146,16 +130,16 @@ static __inline__ int bottom_bit(unsigned int bits) static __inline__ uint8_t bit_reverse8(uint8_t x) { #if defined(__i386__) || defined(__x86_64__) - /* If multiply is fast */ - return ((x*0x0802U & 0x22110U) | (x*0x8020U & 0x88440U))*0x10101U >> 16; + /* If multiply is fast */ + return ((x * 0x0802U & 0x22110U) | (x * 0x8020U & 0x88440U)) * + 0x10101U >> 16; #else - /* If multiply is slow, but we have a barrel shifter */ - x = (x >> 4) | (x << 4); - x = ((x & 0xCC) >> 2) | ((x & 0x33) << 2); - return ((x & 0xAA) >> 1) | ((x & 0x55) << 1); + /* If multiply is slow, but we have a barrel shifter */ + x = (x >> 4) | (x << 4); + x = ((x & 0xCC) >> 2) | ((x & 0x33) << 2); + return ((x & 0xAA) >> 1) | ((x & 0x55) << 1); #endif } -/*- End of function --------------------------------------------------------*/ /*! \brief Bit reverse a 16 bit word. \param data The word to be reversed. @@ -193,9 +177,8 @@ uint16_t make_mask16(uint16_t x); \return The word with the single set bit. */ static __inline__ uint32_t least_significant_one32(uint32_t x) { - return (x & (-(int32_t) x)); + return (x & (-(int32_t) x)); } -/*- End of function --------------------------------------------------------*/ /*! \brief Find the most significant one in a word, and return a word with just that bit set. @@ -204,50 +187,42 @@ static __inline__ uint32_t least_significant_one32(uint32_t x) static __inline__ uint32_t most_significant_one32(uint32_t x) { #if defined(__i386__) || defined(__x86_64__) - return 1 << top_bit(x); + return 1 << top_bit(x); #else - x = make_mask32(x); - return (x ^ (x >> 1)); + x = make_mask32(x); + return (x ^ (x >> 1)); #endif } -/*- End of function --------------------------------------------------------*/ /*! \brief Find the parity of a byte. \param x The byte to be checked. \return 1 for odd, or 0 for even. */ static __inline__ int parity8(uint8_t x) { - x = (x ^ (x >> 4)) & 0x0F; - return (0x6996 >> x) & 1; + x = (x ^ (x >> 4)) & 0x0F; + return (0x6996 >> x) & 1; } -/*- End of function --------------------------------------------------------*/ /*! \brief Find the parity of a 16 bit word. \param x The word to be checked. \return 1 for odd, or 0 for even. */ static __inline__ int parity16(uint16_t x) { - x ^= (x >> 8); - x = (x ^ (x >> 4)) & 0x0F; - return (0x6996 >> x) & 1; + x ^= (x >> 8); + x = (x ^ (x >> 4)) & 0x0F; + return (0x6996 >> x) & 1; } -/*- End of function --------------------------------------------------------*/ /*! \brief Find the parity of a 32 bit word. \param x The word to be checked. \return 1 for odd, or 0 for even. */ static __inline__ int parity32(uint32_t x) { - x ^= (x >> 16); - x ^= (x >> 8); - x = (x ^ (x >> 4)) & 0x0F; - return (0x6996 >> x) & 1; + x ^= (x >> 16); + x ^= (x >> 8); + x = (x ^ (x >> 4)) & 0x0F; + return (0x6996 >> x) & 1; } -/*- End of function --------------------------------------------------------*/ - -#ifdef __cplusplus -} -#endif #endif /*- End of file ------------------------------------------------------------*/ diff --git a/drivers/staging/echo/echo.c b/drivers/staging/echo/echo.c index 4a281b14fc58..b8f2c5e9dee5 100644 --- a/drivers/staging/echo/echo.c +++ b/drivers/staging/echo/echo.c @@ -74,7 +74,6 @@ Steve also has some nice notes on echo cancellers in echo.h - References: [1] Ochiai, Areseki, and Ogihara, "Echo Canceller with Two Echo @@ -105,20 +104,18 @@ Mark, Pawel, and Pavel. */ -#include <linux/kernel.h> /* We're doing kernel work */ +#include <linux/kernel.h> /* We're doing kernel work */ #include <linux/module.h> #include <linux/kernel.h> #include <linux/slab.h> -#define malloc(a) kmalloc((a), GFP_KERNEL) -#define free(a) kfree(a) #include "bit_operations.h" #include "echo.h" #define MIN_TX_POWER_FOR_ADAPTION 64 #define MIN_RX_POWER_FOR_ADAPTION 64 -#define DTD_HANGOVER 600 /* 600 samples, or 75ms */ -#define DC_LOG2BETA 3 /* log2() of DC filter Beta */ +#define DTD_HANGOVER 600 /* 600 samples, or 75ms */ +#define DC_LOG2BETA 3 /* log2() of DC filter Beta */ /*-----------------------------------------------------------------------*\ FUNCTIONS @@ -126,59 +123,58 @@ /* adapting coeffs using the traditional stochastic descent (N)LMS algorithm */ - -#ifdef __BLACKFIN_ASM__ -static void __inline__ lms_adapt_bg(echo_can_state_t *ec, int clean, int shift) +#ifdef __bfin__ +static void __inline__ lms_adapt_bg(struct oslec_state *ec, int clean, + int shift) { - int i, j; - int offset1; - int offset2; - int factor; - int exp; - int16_t *phist; - int n; - - if (shift > 0) - factor = clean << shift; - else - factor = clean >> -shift; - - /* Update the FIR taps */ - - offset2 = ec->curr_pos; - offset1 = ec->taps - offset2; - phist = &ec->fir_state_bg.history[offset2]; - - /* st: and en: help us locate the assembler in echo.s */ - - //asm("st:"); - n = ec->taps; - for (i = 0, j = offset2; i < n; i++, j++) - { - exp = *phist++ * factor; - ec->fir_taps16[1][i] += (int16_t) ((exp+(1<<14)) >> 15); - } - //asm("en:"); - - /* Note the asm for the inner loop above generated by Blackfin gcc - 4.1.1 is pretty good (note even parallel instructions used): - - R0 = W [P0++] (X); - R0 *= R2; - R0 = R0 + R3 (NS) || - R1 = W [P1] (X) || - nop; - R0 >>>= 15; - R0 = R0 + R1; - W [P1++] = R0; - - A block based update algorithm would be much faster but the - above can't be improved on much. Every instruction saved in - the loop above is 2 MIPs/ch! The for loop above is where the - Blackfin spends most of it's time - about 17 MIPs/ch measured - with speedtest.c with 256 taps (32ms). Write-back and - Write-through cache gave about the same performance. - */ + int i, j; + int offset1; + int offset2; + int factor; + int exp; + int16_t *phist; + int n; + + if (shift > 0) + factor = clean << shift; + else + factor = clean >> -shift; + + /* Update the FIR taps */ + + offset2 = ec->curr_pos; + offset1 = ec->taps - offset2; + phist = &ec->fir_state_bg.history[offset2]; + + /* st: and en: help us locate the assembler in echo.s */ + + //asm("st:"); + n = ec->taps; + for (i = 0, j = offset2; i < n; i++, j++) { + exp = *phist++ * factor; + ec->fir_taps16[1][i] += (int16_t) ((exp + (1 << 14)) >> 15); + } + //asm("en:"); + + /* Note the asm for the inner loop above generated by Blackfin gcc + 4.1.1 is pretty good (note even parallel instructions used): + + R0 = W [P0++] (X); + R0 *= R2; + R0 = R0 + R3 (NS) || + R1 = W [P1] (X) || + nop; + R0 >>>= 15; + R0 = R0 + R1; + W [P1++] = R0; + + A block based update algorithm would be much faster but the + above can't be improved on much. Every instruction saved in + the loop above is 2 MIPs/ch! The for loop above is where the + Blackfin spends most of it's time - about 17 MIPs/ch measured + with speedtest.c with 256 taps (32ms). Write-back and + Write-through cache gave about the same performance. + */ } /* @@ -200,392 +196,393 @@ static void __inline__ lms_adapt_bg(echo_can_state_t *ec, int clean, int shift) */ #else -static __inline__ void lms_adapt_bg(echo_can_state_t *ec, int clean, int shift) +static __inline__ void lms_adapt_bg(struct oslec_state *ec, int clean, + int shift) { - int i; - - int offset1; - int offset2; - int factor; - int exp; - - if (shift > 0) - factor = clean << shift; - else - factor = clean >> -shift; - - /* Update the FIR taps */ - - offset2 = ec->curr_pos; - offset1 = ec->taps - offset2; - - for (i = ec->taps - 1; i >= offset1; i--) - { - exp = (ec->fir_state_bg.history[i - offset1]*factor); - ec->fir_taps16[1][i] += (int16_t) ((exp+(1<<14)) >> 15); - } - for ( ; i >= 0; i--) - { - exp = (ec->fir_state_bg.history[i + offset2]*factor); - ec->fir_taps16[1][i] += (int16_t) ((exp+(1<<14)) >> 15); - } + int i; + + int offset1; + int offset2; + int factor; + int exp; + + if (shift > 0) + factor = clean << shift; + else + factor = clean >> -shift; + + /* Update the FIR taps */ + + offset2 = ec->curr_pos; + offset1 = ec->taps - offset2; + + for (i = ec->taps - 1; i >= offset1; i--) { + exp = (ec->fir_state_bg.history[i - offset1] * factor); + ec->fir_taps16[1][i] += (int16_t) ((exp + (1 << 14)) >> 15); + } + for (; i >= 0; i--) { + exp = (ec->fir_state_bg.history[i + offset2] * factor); + ec->fir_taps16[1][i] += (int16_t) ((exp + (1 << 14)) >> 15); + } } #endif -/*- End of function --------------------------------------------------------*/ - -echo_can_state_t *echo_can_create(int len, int adaption_mode) +struct oslec_state *oslec_create(int len, int adaption_mode) { - echo_can_state_t *ec; - int i; - int j; - - ec = kmalloc(sizeof(*ec), GFP_KERNEL); - if (ec == NULL) - return NULL; - memset(ec, 0, sizeof(*ec)); - - ec->taps = len; - ec->log2taps = top_bit(len); - ec->curr_pos = ec->taps - 1; - - for (i = 0; i < 2; i++) - { - if ((ec->fir_taps16[i] = (int16_t *) malloc((ec->taps)*sizeof(int16_t))) == NULL) - { - for (j = 0; j < i; j++) - kfree(ec->fir_taps16[j]); - kfree(ec); - return NULL; - } - memset(ec->fir_taps16[i], 0, (ec->taps)*sizeof(int16_t)); - } - - fir16_create(&ec->fir_state, - ec->fir_taps16[0], - ec->taps); - fir16_create(&ec->fir_state_bg, - ec->fir_taps16[1], - ec->taps); - - for(i=0; i<5; i++) { - ec->xvtx[i] = ec->yvtx[i] = ec->xvrx[i] = ec->yvrx[i] = 0; - } - - ec->cng_level = 1000; - echo_can_adaption_mode(ec, adaption_mode); - - ec->snapshot = (int16_t*)malloc(ec->taps*sizeof(int16_t)); - memset(ec->snapshot, 0, sizeof(int16_t)*ec->taps); - - ec->cond_met = 0; - ec->Pstates = 0; - ec->Ltxacc = ec->Lrxacc = ec->Lcleanacc = ec->Lclean_bgacc = 0; - ec->Ltx = ec->Lrx = ec->Lclean = ec->Lclean_bg = 0; - ec->tx_1 = ec->tx_2 = ec->rx_1 = ec->rx_2 = 0; - ec->Lbgn = ec->Lbgn_acc = 0; - ec->Lbgn_upper = 200; - ec->Lbgn_upper_acc = ec->Lbgn_upper << 13; - - return ec; + struct oslec_state *ec; + int i; + + ec = kzalloc(sizeof(*ec), GFP_KERNEL); + if (!ec) + return NULL; + + ec->taps = len; + ec->log2taps = top_bit(len); + ec->curr_pos = ec->taps - 1; + + for (i = 0; i < 2; i++) { + ec->fir_taps16[i] = + kcalloc(ec->taps, sizeof(int16_t), GFP_KERNEL); + if (!ec->fir_taps16[i]) + goto error_oom; + } + + fir16_create(&ec->fir_state, ec->fir_taps16[0], ec->taps); + fir16_create(&ec->fir_state_bg, ec->fir_taps16[1], ec->taps); + + for (i = 0; i < 5; i++) { + ec->xvtx[i] = ec->yvtx[i] = ec->xvrx[i] = ec->yvrx[i] = 0; + } + + ec->cng_level = 1000; + oslec_adaption_mode(ec, adaption_mode); + + ec->snapshot = kcalloc(ec->taps, sizeof(int16_t), GFP_KERNEL); + if (!ec->snapshot) + goto error_oom; + + ec->cond_met = 0; + ec->Pstates = 0; + ec->Ltxacc = ec->Lrxacc = ec->Lcleanacc = ec->Lclean_bgacc = 0; + ec->Ltx = ec->Lrx = ec->Lclean = ec->Lclean_bg = 0; + ec->tx_1 = ec->tx_2 = ec->rx_1 = ec->rx_2 = 0; + ec->Lbgn = ec->Lbgn_acc = 0; + ec->Lbgn_upper = 200; + ec->Lbgn_upper_acc = ec->Lbgn_upper << 13; + + return ec; + + error_oom: + for (i = 0; i < 2; i++) + kfree(ec->fir_taps16[i]); + + kfree(ec); + return NULL; } -/*- End of function --------------------------------------------------------*/ -void echo_can_free(echo_can_state_t *ec) +EXPORT_SYMBOL_GPL(oslec_create); + +void oslec_free(struct oslec_state *ec) { int i; fir16_free(&ec->fir_state); fir16_free(&ec->fir_state_bg); - for (i = 0; i < 2; i++) + for (i = 0; i < 2; i++) kfree(ec->fir_taps16[i]); kfree(ec->snapshot); kfree(ec); } -/*- End of function --------------------------------------------------------*/ -void echo_can_adaption_mode(echo_can_state_t *ec, int adaption_mode) +EXPORT_SYMBOL_GPL(oslec_free); + +void oslec_adaption_mode(struct oslec_state *ec, int adaption_mode) { - ec->adaption_mode = adaption_mode; + ec->adaption_mode = adaption_mode; } -/*- End of function --------------------------------------------------------*/ -void echo_can_flush(echo_can_state_t *ec) +EXPORT_SYMBOL_GPL(oslec_adaption_mode); + +void oslec_flush(struct oslec_state *ec) { - int i; + int i; - ec->Ltxacc = ec->Lrxacc = ec->Lcleanacc = ec->Lclean_bgacc = 0; - ec->Ltx = ec->Lrx = ec->Lclean = ec->Lclean_bg = 0; - ec->tx_1 = ec->tx_2 = ec->rx_1 = ec->rx_2 = 0; + ec->Ltxacc = ec->Lrxacc = ec->Lcleanacc = ec->Lclean_bgacc = 0; + ec->Ltx = ec->Lrx = ec->Lclean = ec->Lclean_bg = 0; + ec->tx_1 = ec->tx_2 = ec->rx_1 = ec->rx_2 = 0; - ec->Lbgn = ec->Lbgn_acc = 0; - ec->Lbgn_upper = 200; - ec->Lbgn_upper_acc = ec->Lbgn_upper << 13; + ec->Lbgn = ec->Lbgn_acc = 0; + ec->Lbgn_upper = 200; + ec->Lbgn_upper_acc = ec->Lbgn_upper << 13; - ec->nonupdate_dwell = 0; + ec->nonupdate_dwell = 0; - fir16_flush(&ec->fir_state); - fir16_flush(&ec->fir_state_bg); - ec->fir_state.curr_pos = ec->taps - 1; - ec->fir_state_bg.curr_pos = ec->taps - 1; - for (i = 0; i < 2; i++) - memset(ec->fir_taps16[i], 0, ec->taps*sizeof(int16_t)); + fir16_flush(&ec->fir_state); + fir16_flush(&ec->fir_state_bg); + ec->fir_state.curr_pos = ec->taps - 1; + ec->fir_state_bg.curr_pos = ec->taps - 1; + for (i = 0; i < 2; i++) + memset(ec->fir_taps16[i], 0, ec->taps * sizeof(int16_t)); - ec->curr_pos = ec->taps - 1; - ec->Pstates = 0; + ec->curr_pos = ec->taps - 1; + ec->Pstates = 0; } -/*- End of function --------------------------------------------------------*/ -void echo_can_snapshot(echo_can_state_t *ec) { - memcpy(ec->snapshot, ec->fir_taps16[0], ec->taps*sizeof(int16_t)); +EXPORT_SYMBOL_GPL(oslec_flush); + +void oslec_snapshot(struct oslec_state *ec) +{ + memcpy(ec->snapshot, ec->fir_taps16[0], ec->taps * sizeof(int16_t)); } -/*- End of function --------------------------------------------------------*/ + +EXPORT_SYMBOL_GPL(oslec_snapshot); /* Dual Path Echo Canceller ------------------------------------------------*/ -int16_t echo_can_update(echo_can_state_t *ec, int16_t tx, int16_t rx) +int16_t oslec_update(struct oslec_state *ec, int16_t tx, int16_t rx) { - int32_t echo_value; - int clean_bg; - int tmp, tmp1; - - /* Input scaling was found be required to prevent problems when tx - starts clipping. Another possible way to handle this would be the - filter coefficent scaling. */ - - ec->tx = tx; ec->rx = rx; - tx >>=1; - rx >>=1; - - /* - Filter DC, 3dB point is 160Hz (I think), note 32 bit precision required - otherwise values do not track down to 0. Zero at DC, Pole at (1-Beta) - only real axis. Some chip sets (like Si labs) don't need - this, but something like a $10 X100P card does. Any DC really slows - down convergence. - - Note: removes some low frequency from the signal, this reduces - the speech quality when listening to samples through headphones - but may not be obvious through a telephone handset. - - Note that the 3dB frequency in radians is approx Beta, e.g. for - Beta = 2^(-3) = 0.125, 3dB freq is 0.125 rads = 159Hz. - */ - - if (ec->adaption_mode & ECHO_CAN_USE_RX_HPF) { - tmp = rx << 15; + int32_t echo_value; + int clean_bg; + int tmp, tmp1; + + /* Input scaling was found be required to prevent problems when tx + starts clipping. Another possible way to handle this would be the + filter coefficent scaling. */ + + ec->tx = tx; + ec->rx = rx; + tx >>= 1; + rx >>= 1; + + /* + Filter DC, 3dB point is 160Hz (I think), note 32 bit precision required + otherwise values do not track down to 0. Zero at DC, Pole at (1-Beta) + only real axis. Some chip sets (like Si labs) don't need + this, but something like a $10 X100P card does. Any DC really slows + down convergence. + + Note: removes some low frequency from the signal, this reduces + the speech quality when listening to samples through headphones + but may not be obvious through a telephone handset. + + Note that the 3dB frequency in radians is approx Beta, e.g. for + Beta = 2^(-3) = 0.125, 3dB freq is 0.125 rads = 159Hz. + */ + + if (ec->adaption_mode & ECHO_CAN_USE_RX_HPF) { + tmp = rx << 15; #if 1 - /* Make sure the gain of the HPF is 1.0. This can still saturate a little under - impulse conditions, and it might roll to 32768 and need clipping on sustained peak - level signals. However, the scale of such clipping is small, and the error due to - any saturation should not markedly affect the downstream processing. */ - tmp -= (tmp >> 4); + /* Make sure the gain of the HPF is 1.0. This can still saturate a little under + impulse conditions, and it might roll to 32768 and need clipping on sustained peak + level signals. However, the scale of such clipping is small, and the error due to + any saturation should not markedly affect the downstream processing. */ + tmp -= (tmp >> 4); #endif - ec->rx_1 += -(ec->rx_1>>DC_LOG2BETA) + tmp - ec->rx_2; + ec->rx_1 += -(ec->rx_1 >> DC_LOG2BETA) + tmp - ec->rx_2; + + /* hard limit filter to prevent clipping. Note that at this stage + rx should be limited to +/- 16383 due to right shift above */ + tmp1 = ec->rx_1 >> 15; + if (tmp1 > 16383) + tmp1 = 16383; + if (tmp1 < -16383) + tmp1 = -16383; + rx = tmp1; + ec->rx_2 = tmp; + } - /* hard limit filter to prevent clipping. Note that at this stage - rx should be limited to +/- 16383 due to right shift above */ - tmp1 = ec->rx_1 >> 15; - if (tmp1 > 16383) tmp1 = 16383; - if (tmp1 < -16383) tmp1 = -16383; - rx = tmp1; - ec->rx_2 = tmp; - } + /* Block average of power in the filter states. Used for + adaption power calculation. */ - /* Block average of power in the filter states. Used for - adaption power calculation. */ + { + int new, old; + + /* efficient "out with the old and in with the new" algorithm so + we don't have to recalculate over the whole block of + samples. */ + new = (int)tx *(int)tx; + old = (int)ec->fir_state.history[ec->fir_state.curr_pos] * + (int)ec->fir_state.history[ec->fir_state.curr_pos]; + ec->Pstates += + ((new - old) + (1 << ec->log2taps)) >> ec->log2taps; + if (ec->Pstates < 0) + ec->Pstates = 0; + } - { - int new, old; + /* Calculate short term average levels using simple single pole IIRs */ - /* efficient "out with the old and in with the new" algorithm so - we don't have to recalculate over the whole block of - samples. */ - new = (int)tx * (int)tx; - old = (int)ec->fir_state.history[ec->fir_state.curr_pos] * - (int)ec->fir_state.history[ec->fir_state.curr_pos]; - ec->Pstates += ((new - old) + (1<<ec->log2taps)) >> ec->log2taps; - if (ec->Pstates < 0) ec->Pstates = 0; - } - - /* Calculate short term average levels using simple single pole IIRs */ - - ec->Ltxacc += abs(tx) - ec->Ltx; - ec->Ltx = (ec->Ltxacc + (1<<4)) >> 5; - ec->Lrxacc += abs(rx) - ec->Lrx; - ec->Lrx = (ec->Lrxacc + (1<<4)) >> 5; - - /* Foreground filter ---------------------------------------------------*/ - - ec->fir_state.coeffs = ec->fir_taps16[0]; - echo_value = fir16(&ec->fir_state, tx); - ec->clean = rx - echo_value; - ec->Lcleanacc += abs(ec->clean) - ec->Lclean; - ec->Lclean = (ec->Lcleanacc + (1<<4)) >> 5; - - /* Background filter ---------------------------------------------------*/ - - echo_value = fir16(&ec->fir_state_bg, tx); - clean_bg = rx - echo_value; - ec->Lclean_bgacc += abs(clean_bg) - ec->Lclean_bg; - ec->Lclean_bg = (ec->Lclean_bgacc + (1<<4)) >> 5; - - /* Background Filter adaption -----------------------------------------*/ - - /* Almost always adap bg filter, just simple DT and energy - detection to minimise adaption in cases of strong double talk. - However this is not critical for the dual path algorithm. - */ - ec->factor = 0; - ec->shift = 0; - if ((ec->nonupdate_dwell == 0)) { - int P, logP, shift; - - /* Determine: - - f = Beta * clean_bg_rx/P ------ (1) - - where P is the total power in the filter states. - - The Boffins have shown that if we obey (1) we converge - quickly and avoid instability. - - The correct factor f must be in Q30, as this is the fixed - point format required by the lms_adapt_bg() function, - therefore the scaled version of (1) is: - - (2^30) * f = (2^30) * Beta * clean_bg_rx/P - factor = (2^30) * Beta * clean_bg_rx/P ----- (2) - - We have chosen Beta = 0.25 by experiment, so: - - factor = (2^30) * (2^-2) * clean_bg_rx/P - - (30 - 2 - log2(P)) - factor = clean_bg_rx 2 ----- (3) - - To avoid a divide we approximate log2(P) as top_bit(P), - which returns the position of the highest non-zero bit in - P. This approximation introduces an error as large as a - factor of 2, but the algorithm seems to handle it OK. - - Come to think of it a divide may not be a big deal on a - modern DSP, so its probably worth checking out the cycles - for a divide versus a top_bit() implementation. - */ - - P = MIN_TX_POWER_FOR_ADAPTION + ec->Pstates; - logP = top_bit(P) + ec->log2taps; - shift = 30 - 2 - logP; - ec->shift = shift; - - lms_adapt_bg(ec, clean_bg, shift); - } - - /* very simple DTD to make sure we dont try and adapt with strong - near end speech */ - - ec->adapt = 0; - if ((ec->Lrx > MIN_RX_POWER_FOR_ADAPTION) && (ec->Lrx > ec->Ltx)) - ec->nonupdate_dwell = DTD_HANGOVER; - if (ec->nonupdate_dwell) - ec->nonupdate_dwell--; + ec->Ltxacc += abs(tx) - ec->Ltx; + ec->Ltx = (ec->Ltxacc + (1 << 4)) >> 5; + ec->Lrxacc += abs(rx) - ec->Lrx; + ec->Lrx = (ec->Lrxacc + (1 << 4)) >> 5; - /* Transfer logic ------------------------------------------------------*/ + /* Foreground filter --------------------------------------------------- */ - /* These conditions are from the dual path paper [1], I messed with - them a bit to improve performance. */ + ec->fir_state.coeffs = ec->fir_taps16[0]; + echo_value = fir16(&ec->fir_state, tx); + ec->clean = rx - echo_value; + ec->Lcleanacc += abs(ec->clean) - ec->Lclean; + ec->Lclean = (ec->Lcleanacc + (1 << 4)) >> 5; - if ((ec->adaption_mode & ECHO_CAN_USE_ADAPTION) && - (ec->nonupdate_dwell == 0) && - (8*ec->Lclean_bg < 7*ec->Lclean) /* (ec->Lclean_bg < 0.875*ec->Lclean) */ && - (8*ec->Lclean_bg < ec->Ltx) /* (ec->Lclean_bg < 0.125*ec->Ltx) */ ) - { - if (ec->cond_met == 6) { - /* BG filter has had better results for 6 consecutive samples */ - ec->adapt = 1; - memcpy(ec->fir_taps16[0], ec->fir_taps16[1], ec->taps*sizeof(int16_t)); - } - else - ec->cond_met++; - } - else - ec->cond_met = 0; + /* Background filter --------------------------------------------------- */ - /* Non-Linear Processing ---------------------------------------------------*/ + echo_value = fir16(&ec->fir_state_bg, tx); + clean_bg = rx - echo_value; + ec->Lclean_bgacc += abs(clean_bg) - ec->Lclean_bg; + ec->Lclean_bg = (ec->Lclean_bgacc + (1 << 4)) >> 5; - ec->clean_nlp = ec->clean; - if (ec->adaption_mode & ECHO_CAN_USE_NLP) - { - /* Non-linear processor - a fancy way to say "zap small signals, to avoid - residual echo due to (uLaw/ALaw) non-linearity in the channel.". */ + /* Background Filter adaption ----------------------------------------- */ - if ((16*ec->Lclean < ec->Ltx)) - { - /* Our e/c has improved echo by at least 24 dB (each factor of 2 is 6dB, - so 2*2*2*2=16 is the same as 6+6+6+6=24dB) */ - if (ec->adaption_mode & ECHO_CAN_USE_CNG) - { - ec->cng_level = ec->Lbgn; - - /* Very elementary comfort noise generation. Just random - numbers rolled off very vaguely Hoth-like. DR: This - noise doesn't sound quite right to me - I suspect there - are some overlfow issues in the filtering as it's too - "crackly". TODO: debug this, maybe just play noise at - high level or look at spectrum. - */ - - ec->cng_rndnum = 1664525U*ec->cng_rndnum + 1013904223U; - ec->cng_filter = ((ec->cng_rndnum & 0xFFFF) - 32768 + 5*ec->cng_filter) >> 3; - ec->clean_nlp = (ec->cng_filter*ec->cng_level*8) >> 14; - - } - else if (ec->adaption_mode & ECHO_CAN_USE_CLIP) - { - /* This sounds much better than CNG */ - if (ec->clean_nlp > ec->Lbgn) - ec->clean_nlp = ec->Lbgn; - if (ec->clean_nlp < -ec->Lbgn) - ec->clean_nlp = -ec->Lbgn; + /* Almost always adap bg filter, just simple DT and energy + detection to minimise adaption in cases of strong double talk. + However this is not critical for the dual path algorithm. + */ + ec->factor = 0; + ec->shift = 0; + if ((ec->nonupdate_dwell == 0)) { + int P, logP, shift; + + /* Determine: + + f = Beta * clean_bg_rx/P ------ (1) + + where P is the total power in the filter states. + + The Boffins have shown that if we obey (1) we converge + quickly and avoid instability. + + The correct factor f must be in Q30, as this is the fixed + point format required by the lms_adapt_bg() function, + therefore the scaled version of (1) is: + + (2^30) * f = (2^30) * Beta * clean_bg_rx/P + factor = (2^30) * Beta * clean_bg_rx/P ----- (2) + + We have chosen Beta = 0.25 by experiment, so: + + factor = (2^30) * (2^-2) * clean_bg_rx/P + + (30 - 2 - log2(P)) + factor = clean_bg_rx 2 ----- (3) + + To avoid a divide we approximate log2(P) as top_bit(P), + which returns the position of the highest non-zero bit in + P. This approximation introduces an error as large as a + factor of 2, but the algorithm seems to handle it OK. + + Come to think of it a divide may not be a big deal on a + modern DSP, so its probably worth checking out the cycles + for a divide versus a top_bit() implementation. + */ + + P = MIN_TX_POWER_FOR_ADAPTION + ec->Pstates; + logP = top_bit(P) + ec->log2taps; + shift = 30 - 2 - logP; + ec->shift = shift; + + lms_adapt_bg(ec, clean_bg, shift); } - else - { - /* just mute the residual, doesn't sound very good, used mainly - in G168 tests */ - ec->clean_nlp = 0; - } - } - else { - /* Background noise estimator. I tried a few algorithms - here without much luck. This very simple one seems to - work best, we just average the level using a slow (1 sec - time const) filter if the current level is less than a - (experimentally derived) constant. This means we dont - include high level signals like near end speech. When - combined with CNG or especially CLIP seems to work OK. - */ - if (ec->Lclean < 40) { - ec->Lbgn_acc += abs(ec->clean) - ec->Lbgn; - ec->Lbgn = (ec->Lbgn_acc + (1<<11)) >> 12; - } - } - } - - /* Roll around the taps buffer */ - if (ec->curr_pos <= 0) - ec->curr_pos = ec->taps; - ec->curr_pos--; - - if (ec->adaption_mode & ECHO_CAN_DISABLE) - ec->clean_nlp = rx; - - /* Output scaled back up again to match input scaling */ - - return (int16_t) ec->clean_nlp << 1; + + /* very simple DTD to make sure we dont try and adapt with strong + near end speech */ + + ec->adapt = 0; + if ((ec->Lrx > MIN_RX_POWER_FOR_ADAPTION) && (ec->Lrx > ec->Ltx)) + ec->nonupdate_dwell = DTD_HANGOVER; + if (ec->nonupdate_dwell) + ec->nonupdate_dwell--; + + /* Transfer logic ------------------------------------------------------ */ + + /* These conditions are from the dual path paper [1], I messed with + them a bit to improve performance. */ + + if ((ec->adaption_mode & ECHO_CAN_USE_ADAPTION) && + (ec->nonupdate_dwell == 0) && + (8 * ec->Lclean_bg < + 7 * ec->Lclean) /* (ec->Lclean_bg < 0.875*ec->Lclean) */ && + (8 * ec->Lclean_bg < + ec->Ltx) /* (ec->Lclean_bg < 0.125*ec->Ltx) */ ) { + if (ec->cond_met == 6) { + /* BG filter has had better results for 6 consecutive samples */ + ec->adapt = 1; + memcpy(ec->fir_taps16[0], ec->fir_taps16[1], + ec->taps * sizeof(int16_t)); + } else + ec->cond_met++; + } else + ec->cond_met = 0; + + /* Non-Linear Processing --------------------------------------------------- */ + + ec->clean_nlp = ec->clean; + if (ec->adaption_mode & ECHO_CAN_USE_NLP) { + /* Non-linear processor - a fancy way to say "zap small signals, to avoid + residual echo due to (uLaw/ALaw) non-linearity in the channel.". */ + + if ((16 * ec->Lclean < ec->Ltx)) { + /* Our e/c has improved echo by at least 24 dB (each factor of 2 is 6dB, + so 2*2*2*2=16 is the same as 6+6+6+6=24dB) */ + if (ec->adaption_mode & ECHO_CAN_USE_CNG) { + ec->cng_level = ec->Lbgn; + + /* Very elementary comfort noise generation. Just random + numbers rolled off very vaguely Hoth-like. DR: This + noise doesn't sound quite right to me - I suspect there + are some overlfow issues in the filtering as it's too + "crackly". TODO: debug this, maybe just play noise at + high level or look at spectrum. + */ + + ec->cng_rndnum = + 1664525U * ec->cng_rndnum + 1013904223U; + ec->cng_filter = + ((ec->cng_rndnum & 0xFFFF) - 32768 + + 5 * ec->cng_filter) >> 3; + ec->clean_nlp = + (ec->cng_filter * ec->cng_level * 8) >> 14; + + } else if (ec->adaption_mode & ECHO_CAN_USE_CLIP) { + /* This sounds much better than CNG */ + if (ec->clean_nlp > ec->Lbgn) + ec->clean_nlp = ec->Lbgn; + if (ec->clean_nlp < -ec->Lbgn) + ec->clean_nlp = -ec->Lbgn; + } else { + /* just mute the residual, doesn't sound very good, used mainly + in G168 tests */ + ec->clean_nlp = 0; + } + } else { + /* Background noise estimator. I tried a few algorithms + here without much luck. This very simple one seems to + work best, we just average the level using a slow (1 sec + time const) filter if the current level is less than a + (experimentally derived) constant. This means we dont + include high level signals like near end speech. When + combined with CNG or especially CLIP seems to work OK. + */ + if (ec->Lclean < 40) { + ec->Lbgn_acc += abs(ec->clean) - ec->Lbgn; + ec->Lbgn = (ec->Lbgn_acc + (1 << 11)) >> 12; + } + } + } + + /* Roll around the taps buffer */ + if (ec->curr_pos <= 0) + ec->curr_pos = ec->taps; + ec->curr_pos--; + + if (ec->adaption_mode & ECHO_CAN_DISABLE) + ec->clean_nlp = rx; + + /* Output scaled back up again to match input scaling */ + + return (int16_t) ec->clean_nlp << 1; } -/*- End of function --------------------------------------------------------*/ +EXPORT_SYMBOL_GPL(oslec_update); /* This function is seperated from the echo canceller is it is usually called as part of the tx process. See rx HP (DC blocking) filter above, it's @@ -608,25 +605,35 @@ int16_t echo_can_update(echo_can_state_t *ec, int16_t tx, int16_t rx) precision, which noise shapes things, giving very clean DC removal. */ -int16_t echo_can_hpf_tx(echo_can_state_t *ec, int16_t tx) { - int tmp, tmp1; +int16_t oslec_hpf_tx(struct oslec_state * ec, int16_t tx) +{ + int tmp, tmp1; - if (ec->adaption_mode & ECHO_CAN_USE_TX_HPF) { - tmp = tx << 15; + if (ec->adaption_mode & ECHO_CAN_USE_TX_HPF) { + tmp = tx << 15; #if 1 - /* Make sure the gain of the HPF is 1.0. The first can still saturate a little under - impulse conditions, and it might roll to 32768 and need clipping on sustained peak - level signals. However, the scale of such clipping is small, and the error due to - any saturation should not markedly affect the downstream processing. */ - tmp -= (tmp >> 4); + /* Make sure the gain of the HPF is 1.0. The first can still saturate a little under + impulse conditions, and it might roll to 32768 and need clipping on sustained peak + level signals. However, the scale of such clipping is small, and the error due to + any saturation should not markedly affect the downstream processing. */ + tmp -= (tmp >> 4); #endif - ec->tx_1 += -(ec->tx_1>>DC_LOG2BETA) + tmp - ec->tx_2; - tmp1 = ec->tx_1 >> 15; - if (tmp1 > 32767) tmp1 = 32767; - if (tmp1 < -32767) tmp1 = -32767; - tx = tmp1; - ec->tx_2 = tmp; - } - - return tx; + ec->tx_1 += -(ec->tx_1 >> DC_LOG2BETA) + tmp - ec->tx_2; + tmp1 = ec->tx_1 >> 15; + if (tmp1 > 32767) + tmp1 = 32767; + if (tmp1 < -32767) + tmp1 = -32767; + tx = tmp1; + ec->tx_2 = tmp; + } + + return tx; } + +EXPORT_SYMBOL_GPL(oslec_hpf_tx); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Rowe"); +MODULE_DESCRIPTION("Open Source Line Echo Canceller"); +MODULE_VERSION("0.3.0"); diff --git a/drivers/staging/echo/echo.h b/drivers/staging/echo/echo.h index 7a91b4390f3b..9fb9543c4f13 100644 --- a/drivers/staging/echo/echo.h +++ b/drivers/staging/echo/echo.h @@ -118,23 +118,14 @@ a minor burden. */ #include "fir.h" - -/* Mask bits for the adaption mode */ -#define ECHO_CAN_USE_ADAPTION 0x01 -#define ECHO_CAN_USE_NLP 0x02 -#define ECHO_CAN_USE_CNG 0x04 -#define ECHO_CAN_USE_CLIP 0x08 -#define ECHO_CAN_USE_TX_HPF 0x10 -#define ECHO_CAN_USE_RX_HPF 0x20 -#define ECHO_CAN_DISABLE 0x40 +#include "oslec.h" /*! G.168 echo canceller descriptor. This defines the working state for a line echo canceller. */ -typedef struct -{ - int16_t tx,rx; +struct oslec_state { + int16_t tx, rx; int16_t clean; int16_t clean_nlp; @@ -176,45 +167,6 @@ typedef struct /* snapshot sample of coeffs used for development */ int16_t *snapshot; -} echo_can_state_t; - -/*! Create a voice echo canceller context. - \param len The length of the canceller, in samples. - \return The new canceller context, or NULL if the canceller could not be created. -*/ -echo_can_state_t *echo_can_create(int len, int adaption_mode); - -/*! Free a voice echo canceller context. - \param ec The echo canceller context. -*/ -void echo_can_free(echo_can_state_t *ec); - -/*! Flush (reinitialise) a voice echo canceller context. - \param ec The echo canceller context. -*/ -void echo_can_flush(echo_can_state_t *ec); - -/*! Set the adaption mode of a voice echo canceller context. - \param ec The echo canceller context. - \param adapt The mode. -*/ -void echo_can_adaption_mode(echo_can_state_t *ec, int adaption_mode); - -void echo_can_snapshot(echo_can_state_t *ec); - -/*! Process a sample through a voice echo canceller. - \param ec The echo canceller context. - \param tx The transmitted audio sample. - \param rx The received audio sample. - \return The clean (echo cancelled) received sample. -*/ -int16_t echo_can_update(echo_can_state_t *ec, int16_t tx, int16_t rx); - -/*! Process to high pass filter the tx signal. - \param ec The echo canceller context. - \param tx The transmitted auio sample. - \return The HP filtered transmit sample, send this to your D/A. -*/ -int16_t echo_can_hpf_tx(echo_can_state_t *ec, int16_t tx); +}; -#endif /* __ECHO_H */ +#endif /* __ECHO_H */ diff --git a/drivers/staging/echo/fir.h b/drivers/staging/echo/fir.h index e1bfc4994886..5645cb1b2f90 100644 --- a/drivers/staging/echo/fir.h +++ b/drivers/staging/echo/fir.h @@ -72,8 +72,7 @@ 16 bit integer FIR descriptor. This defines the working state for a single instance of an FIR filter using 16 bit integer coefficients. */ -typedef struct -{ +typedef struct { int taps; int curr_pos; const int16_t *coeffs; @@ -85,8 +84,7 @@ typedef struct instance of an FIR filter using 32 bit integer coefficients, and filtering 16 bit integer data. */ -typedef struct -{ +typedef struct { int taps; int curr_pos; const int32_t *coeffs; @@ -97,273 +95,201 @@ typedef struct Floating point FIR descriptor. This defines the working state for a single instance of an FIR filter using floating point coefficients and data. */ -typedef struct -{ +typedef struct { int taps; int curr_pos; const float *coeffs; float *history; } fir_float_state_t; -#ifdef __cplusplus -extern "C" { -#endif - -static __inline__ const int16_t *fir16_create(fir16_state_t *fir, - const int16_t *coeffs, - int taps) +static __inline__ const int16_t *fir16_create(fir16_state_t * fir, + const int16_t * coeffs, int taps) { fir->taps = taps; fir->curr_pos = taps - 1; fir->coeffs = coeffs; -#if defined(USE_MMX) || defined(USE_SSE2) || defined(__BLACKFIN_ASM__) - if ((fir->history = malloc(2*taps*sizeof(int16_t)))) - memset(fir->history, 0, 2*taps*sizeof(int16_t)); +#if defined(USE_MMX) || defined(USE_SSE2) || defined(__bfin__) + fir->history = kcalloc(2 * taps, sizeof(int16_t), GFP_KERNEL); #else - if ((fir->history = (int16_t *) malloc(taps*sizeof(int16_t)))) - memset(fir->history, 0, taps*sizeof(int16_t)); + fir->history = kcalloc(taps, sizeof(int16_t), GFP_KERNEL); #endif return fir->history; } -/*- End of function --------------------------------------------------------*/ -static __inline__ void fir16_flush(fir16_state_t *fir) +static __inline__ void fir16_flush(fir16_state_t * fir) { -#if defined(USE_MMX) || defined(USE_SSE2) || defined(__BLACKFIN_ASM__) - memset(fir->history, 0, 2*fir->taps*sizeof(int16_t)); +#if defined(USE_MMX) || defined(USE_SSE2) || defined(__bfin__) + memset(fir->history, 0, 2 * fir->taps * sizeof(int16_t)); #else - memset(fir->history, 0, fir->taps*sizeof(int16_t)); + memset(fir->history, 0, fir->taps * sizeof(int16_t)); #endif } -/*- End of function --------------------------------------------------------*/ -static __inline__ void fir16_free(fir16_state_t *fir) +static __inline__ void fir16_free(fir16_state_t * fir) { - free(fir->history); + kfree(fir->history); } -/*- End of function --------------------------------------------------------*/ -#ifdef __BLACKFIN_ASM__ +#ifdef __bfin__ static inline int32_t dot_asm(short *x, short *y, int len) { - int dot; - - len--; - - __asm__ - ( - "I0 = %1;\n\t" - "I1 = %2;\n\t" - "A0 = 0;\n\t" - "R0.L = W[I0++] || R1.L = W[I1++];\n\t" - "LOOP dot%= LC0 = %3;\n\t" - "LOOP_BEGIN dot%=;\n\t" - "A0 += R0.L * R1.L (IS) || R0.L = W[I0++] || R1.L = W[I1++];\n\t" - "LOOP_END dot%=;\n\t" - "A0 += R0.L*R1.L (IS);\n\t" - "R0 = A0;\n\t" - "%0 = R0;\n\t" - : "=&d" (dot) - : "a" (x), "a" (y), "a" (len) - : "I0", "I1", "A1", "A0", "R0", "R1" - ); - - return dot; + int dot; + + len--; + + __asm__("I0 = %1;\n\t" + "I1 = %2;\n\t" + "A0 = 0;\n\t" + "R0.L = W[I0++] || R1.L = W[I1++];\n\t" + "LOOP dot%= LC0 = %3;\n\t" + "LOOP_BEGIN dot%=;\n\t" + "A0 += R0.L * R1.L (IS) || R0.L = W[I0++] || R1.L = W[I1++];\n\t" + "LOOP_END dot%=;\n\t" + "A0 += R0.L*R1.L (IS);\n\t" + "R0 = A0;\n\t" + "%0 = R0;\n\t" + :"=&d"(dot) + :"a"(x), "a"(y), "a"(len) + :"I0", "I1", "A1", "A0", "R0", "R1" + ); + + return dot; } #endif -/*- End of function --------------------------------------------------------*/ -static __inline__ int16_t fir16(fir16_state_t *fir, int16_t sample) +static __inline__ int16_t fir16(fir16_state_t * fir, int16_t sample) { - int32_t y; + int32_t y; #if defined(USE_MMX) - int i; - mmx_t *mmx_coeffs; - mmx_t *mmx_hist; - - fir->history[fir->curr_pos] = sample; - fir->history[fir->curr_pos + fir->taps] = sample; - - mmx_coeffs = (mmx_t *) fir->coeffs; - mmx_hist = (mmx_t *) &fir->history[fir->curr_pos]; - i = fir->taps; - pxor_r2r(mm4, mm4); - /* 8 samples per iteration, so the filter must be a multiple of 8 long. */ - while (i > 0) - { - movq_m2r(mmx_coeffs[0], mm0); - movq_m2r(mmx_coeffs[1], mm2); - movq_m2r(mmx_hist[0], mm1); - movq_m2r(mmx_hist[1], mm3); - mmx_coeffs += 2; - mmx_hist += 2; - pmaddwd_r2r(mm1, mm0); - pmaddwd_r2r(mm3, mm2); - paddd_r2r(mm0, mm4); - paddd_r2r(mm2, mm4); - i -= 8; - } - movq_r2r(mm4, mm0); - psrlq_i2r(32, mm0); - paddd_r2r(mm0, mm4); - movd_r2m(mm4, y); - emms(); + int i; + mmx_t *mmx_coeffs; + mmx_t *mmx_hist; + + fir->history[fir->curr_pos] = sample; + fir->history[fir->curr_pos + fir->taps] = sample; + + mmx_coeffs = (mmx_t *) fir->coeffs; + mmx_hist = (mmx_t *) & fir->history[fir->curr_pos]; + i = fir->taps; + pxor_r2r(mm4, mm4); + /* 8 samples per iteration, so the filter must be a multiple of 8 long. */ + while (i > 0) { + movq_m2r(mmx_coeffs[0], mm0); + movq_m2r(mmx_coeffs[1], mm2); + movq_m2r(mmx_hist[0], mm1); + movq_m2r(mmx_hist[1], mm3); + mmx_coeffs += 2; + mmx_hist += 2; + pmaddwd_r2r(mm1, mm0); + pmaddwd_r2r(mm3, mm2); + paddd_r2r(mm0, mm4); + paddd_r2r(mm2, mm4); + i -= 8; + } + movq_r2r(mm4, mm0); + psrlq_i2r(32, mm0); + paddd_r2r(mm0, mm4); + movd_r2m(mm4, y); + emms(); #elif defined(USE_SSE2) - int i; - xmm_t *xmm_coeffs; - xmm_t *xmm_hist; - - fir->history[fir->curr_pos] = sample; - fir->history[fir->curr_pos + fir->taps] = sample; - - xmm_coeffs = (xmm_t *) fir->coeffs; - xmm_hist = (xmm_t *) &fir->history[fir->curr_pos]; - i = fir->taps; - pxor_r2r(xmm4, xmm4); - /* 16 samples per iteration, so the filter must be a multiple of 16 long. */ - while (i > 0) - { - movdqu_m2r(xmm_coeffs[0], xmm0); - movdqu_m2r(xmm_coeffs[1], xmm2); - movdqu_m2r(xmm_hist[0], xmm1); - movdqu_m2r(xmm_hist[1], xmm3); - xmm_coeffs += 2; - xmm_hist += 2; - pmaddwd_r2r(xmm1, xmm0); - pmaddwd_r2r(xmm3, xmm2); - paddd_r2r(xmm0, xmm4); - paddd_r2r(xmm2, xmm4); - i -= 16; - } - movdqa_r2r(xmm4, xmm0); - psrldq_i2r(8, xmm0); - paddd_r2r(xmm0, xmm4); - movdqa_r2r(xmm4, xmm0); - psrldq_i2r(4, xmm0); - paddd_r2r(xmm0, xmm4); - movd_r2m(xmm4, y); -#elif defined(__BLACKFIN_ASM__) - fir->history[fir->curr_pos] = sample; - fir->history[fir->curr_pos + fir->taps] = sample; - y = dot_asm((int16_t*)fir->coeffs, &fir->history[fir->curr_pos], fir->taps); + int i; + xmm_t *xmm_coeffs; + xmm_t *xmm_hist; + + fir->history[fir->curr_pos] = sample; + fir->history[fir->curr_pos + fir->taps] = sample; + + xmm_coeffs = (xmm_t *) fir->coeffs; + xmm_hist = (xmm_t *) & fir->history[fir->curr_pos]; + i = fir->taps; + pxor_r2r(xmm4, xmm4); + /* 16 samples per iteration, so the filter must be a multiple of 16 long. */ + while (i > 0) { + movdqu_m2r(xmm_coeffs[0], xmm0); + movdqu_m2r(xmm_coeffs[1], xmm2); + movdqu_m2r(xmm_hist[0], xmm1); + movdqu_m2r(xmm_hist[1], xmm3); + xmm_coeffs += 2; + xmm_hist += 2; + pmaddwd_r2r(xmm1, xmm0); + pmaddwd_r2r(xmm3, xmm2); + paddd_r2r(xmm0, xmm4); + paddd_r2r(xmm2, xmm4); + i -= 16; + } + movdqa_r2r(xmm4, xmm0); + psrldq_i2r(8, xmm0); + paddd_r2r(xmm0, xmm4); + movdqa_r2r(xmm4, xmm0); + psrldq_i2r(4, xmm0); + paddd_r2r(xmm0, xmm4); + movd_r2m(xmm4, y); +#elif defined(__bfin__) + fir->history[fir->curr_pos] = sample; + fir->history[fir->curr_pos + fir->taps] = sample; + y = dot_asm((int16_t *) fir->coeffs, &fir->history[fir->curr_pos], + fir->taps); #else - int i; - int offset1; - int offset2; - - fir->history[fir->curr_pos] = sample; - - offset2 = fir->curr_pos; - offset1 = fir->taps - offset2; - y = 0; - for (i = fir->taps - 1; i >= offset1; i--) - y += fir->coeffs[i]*fir->history[i - offset1]; - for ( ; i >= 0; i--) - y += fir->coeffs[i]*fir->history[i + offset2]; + int i; + int offset1; + int offset2; + + fir->history[fir->curr_pos] = sample; + + offset2 = fir->curr_pos; + offset1 = fir->taps - offset2; + y = 0; + for (i = fir->taps - 1; i >= offset1; i--) + y += fir->coeffs[i] * fir->history[i - offset1]; + for (; i >= 0; i--) + y += fir->coeffs[i] * fir->history[i + offset2]; #endif - if (fir->curr_pos <= 0) - fir->curr_pos = fir->taps; - fir->curr_pos--; - return (int16_t) (y >> 15); -} -/*- End of function --------------------------------------------------------*/ - -static __inline__ const int16_t *fir32_create(fir32_state_t *fir, - const int32_t *coeffs, - int taps) -{ - fir->taps = taps; - fir->curr_pos = taps - 1; - fir->coeffs = coeffs; - fir->history = (int16_t *) malloc(taps*sizeof(int16_t)); - if (fir->history) - memset(fir->history, '\0', taps*sizeof(int16_t)); - return fir->history; -} -/*- End of function --------------------------------------------------------*/ - -static __inline__ void fir32_flush(fir32_state_t *fir) -{ - memset(fir->history, 0, fir->taps*sizeof(int16_t)); + if (fir->curr_pos <= 0) + fir->curr_pos = fir->taps; + fir->curr_pos--; + return (int16_t) (y >> 15); } -/*- End of function --------------------------------------------------------*/ -static __inline__ void fir32_free(fir32_state_t *fir) +static __inline__ const int16_t *fir32_create(fir32_state_t * fir, + const int32_t * coeffs, int taps) { - free(fir->history); -} -/*- End of function --------------------------------------------------------*/ - -static __inline__ int16_t fir32(fir32_state_t *fir, int16_t sample) -{ - int i; - int32_t y; - int offset1; - int offset2; - - fir->history[fir->curr_pos] = sample; - offset2 = fir->curr_pos; - offset1 = fir->taps - offset2; - y = 0; - for (i = fir->taps - 1; i >= offset1; i--) - y += fir->coeffs[i]*fir->history[i - offset1]; - for ( ; i >= 0; i--) - y += fir->coeffs[i]*fir->history[i + offset2]; - if (fir->curr_pos <= 0) - fir->curr_pos = fir->taps; - fir->curr_pos--; - return (int16_t) (y >> 15); + fir->taps = taps; + fir->curr_pos = taps - 1; + fir->coeffs = coeffs; + fir->history = kcalloc(taps, sizeof(int16_t), GFP_KERNEL); + return fir->history; } -/*- End of function --------------------------------------------------------*/ -#ifndef __KERNEL__ -static __inline__ const float *fir_float_create(fir_float_state_t *fir, - const float *coeffs, - int taps) +static __inline__ void fir32_flush(fir32_state_t * fir) { - fir->taps = taps; - fir->curr_pos = taps - 1; - fir->coeffs = coeffs; - fir->history = (float *) malloc(taps*sizeof(float)); - if (fir->history) - memset(fir->history, '\0', taps*sizeof(float)); - return fir->history; + memset(fir->history, 0, fir->taps * sizeof(int16_t)); } -/*- End of function --------------------------------------------------------*/ -static __inline__ void fir_float_free(fir_float_state_t *fir) +static __inline__ void fir32_free(fir32_state_t * fir) { - free(fir->history); + kfree(fir->history); } -/*- End of function --------------------------------------------------------*/ -static __inline__ int16_t fir_float(fir_float_state_t *fir, int16_t sample) +static __inline__ int16_t fir32(fir32_state_t * fir, int16_t sample) { - int i; - float y; - int offset1; - int offset2; - - fir->history[fir->curr_pos] = sample; - - offset2 = fir->curr_pos; - offset1 = fir->taps - offset2; - y = 0; - for (i = fir->taps - 1; i >= offset1; i--) - y += fir->coeffs[i]*fir->history[i - offset1]; - for ( ; i >= 0; i--) - y += fir->coeffs[i]*fir->history[i + offset2]; - if (fir->curr_pos <= 0) - fir->curr_pos = fir->taps; - fir->curr_pos--; - return (int16_t) y; + int i; + int32_t y; + int offset1; + int offset2; + + fir->history[fir->curr_pos] = sample; + offset2 = fir->curr_pos; + offset1 = fir->taps - offset2; + y = 0; + for (i = fir->taps - 1; i >= offset1; i--) + y += fir->coeffs[i] * fir->history[i - offset1]; + for (; i >= 0; i--) + y += fir->coeffs[i] * fir->history[i + offset2]; + if (fir->curr_pos <= 0) + fir->curr_pos = fir->taps; + fir->curr_pos--; + return (int16_t) (y >> 15); } -/*- End of function --------------------------------------------------------*/ -#endif - -#ifdef __cplusplus -} -#endif #endif /*- End of file ------------------------------------------------------------*/ diff --git a/drivers/staging/echo/mmx.h b/drivers/staging/echo/mmx.h index b5a3964865b6..35412efe61ce 100644 --- a/drivers/staging/echo/mmx.h +++ b/drivers/staging/echo/mmx.h @@ -27,24 +27,23 @@ * values by ULL, lest they be truncated by the compiler) */ -typedef union { - long long q; /* Quadword (64-bit) value */ - unsigned long long uq; /* Unsigned Quadword */ - int d[2]; /* 2 Doubleword (32-bit) values */ - unsigned int ud[2]; /* 2 Unsigned Doubleword */ - short w[4]; /* 4 Word (16-bit) values */ - unsigned short uw[4]; /* 4 Unsigned Word */ - char b[8]; /* 8 Byte (8-bit) values */ - unsigned char ub[8]; /* 8 Unsigned Byte */ - float s[2]; /* Single-precision (32-bit) value */ -} mmx_t; /* On an 8-byte (64-bit) boundary */ +typedef union { + long long q; /* Quadword (64-bit) value */ + unsigned long long uq; /* Unsigned Quadword */ + int d[2]; /* 2 Doubleword (32-bit) values */ + unsigned int ud[2]; /* 2 Unsigned Doubleword */ + short w[4]; /* 4 Word (16-bit) values */ + unsigned short uw[4]; /* 4 Unsigned Word */ + char b[8]; /* 8 Byte (8-bit) values */ + unsigned char ub[8]; /* 8 Unsigned Byte */ + float s[2]; /* Single-precision (32-bit) value */ +} mmx_t; /* On an 8-byte (64-bit) boundary */ /* SSE registers */ typedef union { char b[16]; } xmm_t; - #define mmx_i2r(op,imm,reg) \ __asm__ __volatile__ (#op " %0, %%" #reg \ : /* nothing */ \ @@ -63,7 +62,6 @@ typedef union { #define mmx_r2r(op,regs,regd) \ __asm__ __volatile__ (#op " %" #regs ", %" #regd) - #define emms() __asm__ __volatile__ ("emms") #define movd_m2r(var,reg) mmx_m2r (movd, var, reg) @@ -192,16 +190,13 @@ typedef union { #define pxor_m2r(var,reg) mmx_m2r (pxor, var, reg) #define pxor_r2r(regs,regd) mmx_r2r (pxor, regs, regd) - /* 3DNOW extensions */ #define pavgusb_m2r(var,reg) mmx_m2r (pavgusb, var, reg) #define pavgusb_r2r(regs,regd) mmx_r2r (pavgusb, regs, regd) - /* AMD MMX extensions - also available in intel SSE */ - #define mmx_m2ri(op,mem,reg,imm) \ __asm__ __volatile__ (#op " %1, %0, %%" #reg \ : /* nothing */ \ @@ -216,7 +211,6 @@ typedef union { : /* nothing */ \ : "m" (mem)) - #define maskmovq(regs,maskreg) mmx_r2ri (maskmovq, regs, maskreg) #define movntq_r2m(mmreg,var) mmx_r2m (movntq, mmreg, var) @@ -284,5 +278,4 @@ typedef union { #define punpcklqdq_r2r(regs,regd) mmx_r2r (punpcklqdq, regs, regd) #define punpckhqdq_r2r(regs,regd) mmx_r2r (punpckhqdq, regs, regd) - #endif /* AVCODEC_I386MMX_H */ diff --git a/drivers/staging/echo/oslec.h b/drivers/staging/echo/oslec.h new file mode 100644 index 000000000000..bad852328a2f --- /dev/null +++ b/drivers/staging/echo/oslec.h @@ -0,0 +1,86 @@ +/* + * OSLEC - A line echo canceller. This code is being developed + * against and partially complies with G168. Using code from SpanDSP + * + * Written by Steve Underwood <steveu@coppice.org> + * and David Rowe <david_at_rowetel_dot_com> + * + * Copyright (C) 2001 Steve Underwood and 2007-2008 David Rowe + * + * All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef __OSLEC_H +#define __OSLEC_H + +/* TODO: document interface */ + +/* Mask bits for the adaption mode */ +#define ECHO_CAN_USE_ADAPTION 0x01 +#define ECHO_CAN_USE_NLP 0x02 +#define ECHO_CAN_USE_CNG 0x04 +#define ECHO_CAN_USE_CLIP 0x08 +#define ECHO_CAN_USE_TX_HPF 0x10 +#define ECHO_CAN_USE_RX_HPF 0x20 +#define ECHO_CAN_DISABLE 0x40 + +/*! + G.168 echo canceller descriptor. This defines the working state for a line + echo canceller. +*/ +struct oslec_state; + +/*! Create a voice echo canceller context. + \param len The length of the canceller, in samples. + \return The new canceller context, or NULL if the canceller could not be created. +*/ +struct oslec_state *oslec_create(int len, int adaption_mode); + +/*! Free a voice echo canceller context. + \param ec The echo canceller context. +*/ +void oslec_free(struct oslec_state *ec); + +/*! Flush (reinitialise) a voice echo canceller context. + \param ec The echo canceller context. +*/ +void oslec_flush(struct oslec_state *ec); + +/*! Set the adaption mode of a voice echo canceller context. + \param ec The echo canceller context. + \param adapt The mode. +*/ +void oslec_adaption_mode(struct oslec_state *ec, int adaption_mode); + +void oslec_snapshot(struct oslec_state *ec); + +/*! Process a sample through a voice echo canceller. + \param ec The echo canceller context. + \param tx The transmitted audio sample. + \param rx The received audio sample. + \return The clean (echo cancelled) received sample. +*/ +int16_t oslec_update(struct oslec_state *ec, int16_t tx, int16_t rx); + +/*! Process to high pass filter the tx signal. + \param ec The echo canceller context. + \param tx The transmitted auio sample. + \return The HP filtered transmit sample, send this to your D/A. +*/ +int16_t oslec_hpf_tx(struct oslec_state *ec, int16_t tx); + +#endif /* __OSLEC_H */ diff --git a/drivers/staging/et131x/et1310_phy.c b/drivers/staging/et131x/et1310_phy.c index 6c4fa54419ea..9dd6dfd9a033 100644 --- a/drivers/staging/et131x/et1310_phy.c +++ b/drivers/staging/et131x/et1310_phy.c @@ -84,7 +84,6 @@ #include <linux/if_arp.h> #include <linux/ioport.h> #include <linux/random.h> -#include <linux/delay.h> #include "et1310_phy.h" #include "et1310_pm.h" @@ -95,7 +94,6 @@ #include "et131x_initpci.h" #include "et1310_address_map.h" -#include "et1310_jagcore.h" #include "et1310_tx.h" #include "et1310_rx.h" #include "et1310_mac.h" diff --git a/drivers/staging/et131x/et131x_debug.c b/drivers/staging/et131x/et131x_debug.c index 9ee5bce92c27..d1dd46e0a9c8 100644 --- a/drivers/staging/et131x/et131x_debug.c +++ b/drivers/staging/et131x/et131x_debug.c @@ -97,7 +97,6 @@ #include "et131x_isr.h" #include "et1310_address_map.h" -#include "et1310_jagcore.h" #include "et1310_tx.h" #include "et1310_rx.h" #include "et1310_mac.h" diff --git a/drivers/staging/et131x/et131x_initpci.c b/drivers/staging/et131x/et131x_initpci.c index 4c6f171f5b7c..a18c499d0ae0 100644 --- a/drivers/staging/et131x/et131x_initpci.c +++ b/drivers/staging/et131x/et131x_initpci.c @@ -97,7 +97,6 @@ #include "et131x_isr.h" #include "et1310_address_map.h" -#include "et1310_jagcore.h" #include "et1310_tx.h" #include "et1310_rx.h" #include "et1310_mac.h" diff --git a/drivers/staging/go7007/go7007-driver.c b/drivers/staging/go7007/go7007-driver.c index 81ae4b0fa890..e4ead96679c8 100644 --- a/drivers/staging/go7007/go7007-driver.c +++ b/drivers/staging/go7007/go7007-driver.c @@ -16,7 +16,6 @@ */ #include <linux/module.h> -#include <linux/version.h> #include <linux/init.h> #include <linux/delay.h> #include <linux/sched.h> diff --git a/drivers/staging/go7007/go7007-fw.c b/drivers/staging/go7007/go7007-fw.c index c2aea1020b0d..a0e17b0e0ce3 100644 --- a/drivers/staging/go7007/go7007-fw.c +++ b/drivers/staging/go7007/go7007-fw.c @@ -26,7 +26,6 @@ #include <linux/module.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/time.h> #include <linux/mm.h> #include <linux/device.h> diff --git a/drivers/staging/go7007/go7007-i2c.c b/drivers/staging/go7007/go7007-i2c.c index 10baae3dade6..cd55b76eabc7 100644 --- a/drivers/staging/go7007/go7007-i2c.c +++ b/drivers/staging/go7007/go7007-i2c.c @@ -15,7 +15,6 @@ * Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. */ -#include <linux/version.h> #include <linux/module.h> #include <linux/init.h> #include <linux/delay.h> diff --git a/drivers/staging/go7007/go7007-usb.c b/drivers/staging/go7007/go7007-usb.c index d4ed6d2b715f..3f5ee3424e72 100644 --- a/drivers/staging/go7007/go7007-usb.c +++ b/drivers/staging/go7007/go7007-usb.c @@ -16,7 +16,6 @@ */ #include <linux/module.h> -#include <linux/version.h> #include <linux/kernel.h> #include <linux/init.h> #include <linux/wait.h> diff --git a/drivers/staging/go7007/snd-go7007.c b/drivers/staging/go7007/snd-go7007.c index 382740c405ff..a7de401f61ab 100644 --- a/drivers/staging/go7007/snd-go7007.c +++ b/drivers/staging/go7007/snd-go7007.c @@ -17,7 +17,6 @@ #include <linux/kernel.h> #include <linux/module.h> -#include <linux/version.h> #include <linux/moduleparam.h> #include <linux/init.h> #include <linux/spinlock.h> diff --git a/drivers/staging/go7007/wis-ov7640.c b/drivers/staging/go7007/wis-ov7640.c index f5f11e927af3..2f9efca04606 100644 --- a/drivers/staging/go7007/wis-ov7640.c +++ b/drivers/staging/go7007/wis-ov7640.c @@ -17,7 +17,6 @@ #include <linux/module.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/i2c.h> #include <linux/videodev2.h> diff --git a/drivers/staging/go7007/wis-saa7113.c b/drivers/staging/go7007/wis-saa7113.c index c1aff1b923a0..11689723945e 100644 --- a/drivers/staging/go7007/wis-saa7113.c +++ b/drivers/staging/go7007/wis-saa7113.c @@ -17,7 +17,6 @@ #include <linux/module.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/i2c.h> #include <linux/videodev2.h> #include <linux/ioctl.h> diff --git a/drivers/staging/go7007/wis-saa7115.c b/drivers/staging/go7007/wis-saa7115.c index 5c94c883b312..59417a7174d7 100644 --- a/drivers/staging/go7007/wis-saa7115.c +++ b/drivers/staging/go7007/wis-saa7115.c @@ -17,7 +17,6 @@ #include <linux/module.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/i2c.h> #include <linux/videodev2.h> #include <linux/ioctl.h> diff --git a/drivers/staging/go7007/wis-sony-tuner.c b/drivers/staging/go7007/wis-sony-tuner.c index 5997fb479459..5a91ee409a7c 100644 --- a/drivers/staging/go7007/wis-sony-tuner.c +++ b/drivers/staging/go7007/wis-sony-tuner.c @@ -17,7 +17,6 @@ #include <linux/module.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/i2c.h> #include <linux/videodev2.h> #include <media/tuner.h> diff --git a/drivers/staging/go7007/wis-tw2804.c b/drivers/staging/go7007/wis-tw2804.c index 27fe4d0d4ed6..57b8f2b1caa3 100644 --- a/drivers/staging/go7007/wis-tw2804.c +++ b/drivers/staging/go7007/wis-tw2804.c @@ -17,7 +17,6 @@ #include <linux/module.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/i2c.h> #include <linux/videodev2.h> #include <linux/ioctl.h> diff --git a/drivers/staging/go7007/wis-tw9903.c b/drivers/staging/go7007/wis-tw9903.c index d8e41968022e..40627b282cb4 100644 --- a/drivers/staging/go7007/wis-tw9903.c +++ b/drivers/staging/go7007/wis-tw9903.c @@ -17,7 +17,6 @@ #include <linux/module.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/i2c.h> #include <linux/videodev2.h> #include <linux/ioctl.h> diff --git a/drivers/staging/go7007/wis-uda1342.c b/drivers/staging/go7007/wis-uda1342.c index a0894e3cb8c7..555645c0cc1a 100644 --- a/drivers/staging/go7007/wis-uda1342.c +++ b/drivers/staging/go7007/wis-uda1342.c @@ -17,7 +17,6 @@ #include <linux/module.h> #include <linux/init.h> -#include <linux/version.h> #include <linux/i2c.h> #include <linux/videodev2.h> #include <media/tvaudio.h> diff --git a/drivers/staging/me4000/me4000.c b/drivers/staging/me4000/me4000.c index 862dd7ffb5c0..0b33773bb4f6 100644 --- a/drivers/staging/me4000/me4000.c +++ b/drivers/staging/me4000/me4000.c @@ -25,24 +25,21 @@ #include <linux/sched.h> #include <linux/interrupt.h> #include <linux/pci.h> -#include <asm/io.h> -#include <asm/system.h> -#include <asm/uaccess.h> #include <linux/errno.h> #include <linux/delay.h> -#include <linux/fs.h> #include <linux/mm.h> #include <linux/unistd.h> #include <linux/list.h> #include <linux/proc_fs.h> - +#include <linux/types.h> #include <linux/poll.h> #include <linux/vmalloc.h> +#include <linux/slab.h> #include <asm/pgtable.h> #include <asm/uaccess.h> -#include <linux/types.h> - -#include <linux/slab.h> +#include <asm/io.h> +#include <asm/system.h> +#include <asm/uaccess.h> /* Include-File for the Meilhaus ME-4000 I/O board */ #include "me4000.h" @@ -57,14 +54,14 @@ MODULE_SUPPORTED_DEVICE("Meilhaus ME-4000 Multi I/O boards"); MODULE_LICENSE("GPL"); /* Board specific data are kept in a global list */ -LIST_HEAD(me4000_board_info_list); +static LIST_HEAD(me4000_board_info_list); /* Major Device Numbers. 0 means to get it automatically from the System */ -static int me4000_ao_major_driver_no = 0; -static int me4000_ai_major_driver_no = 0; -static int me4000_dio_major_driver_no = 0; -static int me4000_cnt_major_driver_no = 0; -static int me4000_ext_int_major_driver_no = 0; +static int me4000_ao_major_driver_no; +static int me4000_ai_major_driver_no; +static int me4000_dio_major_driver_no; +static int me4000_cnt_major_driver_no; +static int me4000_ext_int_major_driver_no; /* Let the user specify a custom major driver number */ module_param(me4000_ao_major_driver_no, int, 0); @@ -88,36 +85,22 @@ MODULE_PARM_DESC(me4000_ext_int_major_driver_no, "Major driver number for external interrupt (default 0)"); /*----------------------------------------------------------------------------- - Module stuff - ---------------------------------------------------------------------------*/ -int init_module(void); -void cleanup_module(void); - -/*----------------------------------------------------------------------------- Board detection and initialization ---------------------------------------------------------------------------*/ static int me4000_probe(struct pci_dev *dev, const struct pci_device_id *id); -static int me4000_xilinx_download(me4000_info_t *); -static int me4000_reset_board(me4000_info_t *); +static int me4000_xilinx_download(struct me4000_info *); +static int me4000_reset_board(struct me4000_info *); static void clear_board_info_list(void); -static int get_registers(struct pci_dev *dev, me4000_info_t * info); -static int init_board_info(struct pci_dev *dev, me4000_info_t * board_info); -static int alloc_ao_contexts(me4000_info_t * info); -static void release_ao_contexts(me4000_info_t * board_info); -static int alloc_ai_context(me4000_info_t * info); -static int alloc_dio_context(me4000_info_t * info); -static int alloc_cnt_context(me4000_info_t * info); -static int alloc_ext_int_context(me4000_info_t * info); - +static void release_ao_contexts(struct me4000_info *board_info); /*----------------------------------------------------------------------------- Stuff used by all device parts ---------------------------------------------------------------------------*/ static int me4000_open(struct inode *, struct file *); static int me4000_release(struct inode *, struct file *); -static int me4000_get_user_info(me4000_user_info_t *, - me4000_info_t * board_info); +static int me4000_get_user_info(struct me4000_user_info *, + struct me4000_info *board_info); static int me4000_read_procmem(char *, char **, off_t, int, int *, void *); /*----------------------------------------------------------------------------- @@ -140,40 +123,42 @@ static int me4000_ao_ioctl_cont(struct inode *, struct file *, unsigned int, static unsigned int me4000_ao_poll_cont(struct file *, poll_table *); static int me4000_ao_fsync_cont(struct file *, struct dentry *, int); -static int me4000_ao_start(unsigned long *, me4000_ao_context_t *); -static int me4000_ao_stop(me4000_ao_context_t *); -static int me4000_ao_immediate_stop(me4000_ao_context_t *); -static int me4000_ao_timer_set_divisor(u32 *, me4000_ao_context_t *); -static int me4000_ao_preload(me4000_ao_context_t *); -static int me4000_ao_preload_update(me4000_ao_context_t *); -static int me4000_ao_ex_trig_set_edge(int *, me4000_ao_context_t *); -static int me4000_ao_ex_trig_enable(me4000_ao_context_t *); -static int me4000_ao_ex_trig_disable(me4000_ao_context_t *); -static int me4000_ao_prepare(me4000_ao_context_t * ao_info); -static int me4000_ao_reset(me4000_ao_context_t * ao_info); -static int me4000_ao_enable_do(me4000_ao_context_t *); -static int me4000_ao_disable_do(me4000_ao_context_t *); -static int me4000_ao_fsm_state(int *, me4000_ao_context_t *); - -static int me4000_ao_simultaneous_ex_trig(me4000_ao_context_t * ao_context); -static int me4000_ao_simultaneous_sw(me4000_ao_context_t * ao_context); -static int me4000_ao_simultaneous_disable(me4000_ao_context_t * ao_context); -static int me4000_ao_simultaneous_update(me4000_ao_channel_list_t * channels, - me4000_ao_context_t * ao_context); - -static int me4000_ao_synchronous_ex_trig(me4000_ao_context_t * ao_context); -static int me4000_ao_synchronous_sw(me4000_ao_context_t * ao_context); -static int me4000_ao_synchronous_disable(me4000_ao_context_t * ao_context); +static int me4000_ao_start(unsigned long *, struct me4000_ao_context *); +static int me4000_ao_stop(struct me4000_ao_context *); +static int me4000_ao_immediate_stop(struct me4000_ao_context *); +static int me4000_ao_timer_set_divisor(u32 *, struct me4000_ao_context *); +static int me4000_ao_preload(struct me4000_ao_context *); +static int me4000_ao_preload_update(struct me4000_ao_context *); +static int me4000_ao_ex_trig_set_edge(int *, struct me4000_ao_context *); +static int me4000_ao_ex_trig_enable(struct me4000_ao_context *); +static int me4000_ao_ex_trig_disable(struct me4000_ao_context *); +static int me4000_ao_prepare(struct me4000_ao_context *ao_info); +static int me4000_ao_reset(struct me4000_ao_context *ao_info); +static int me4000_ao_enable_do(struct me4000_ao_context *); +static int me4000_ao_disable_do(struct me4000_ao_context *); +static int me4000_ao_fsm_state(int *, struct me4000_ao_context *); + +static int me4000_ao_simultaneous_ex_trig(struct me4000_ao_context *ao_context); +static int me4000_ao_simultaneous_sw(struct me4000_ao_context *ao_context); +static int me4000_ao_simultaneous_disable(struct me4000_ao_context *ao_context); +static int me4000_ao_simultaneous_update( + struct me4000_ao_channel_list *channels, + struct me4000_ao_context *ao_context); + +static int me4000_ao_synchronous_ex_trig(struct me4000_ao_context *ao_context); +static int me4000_ao_synchronous_sw(struct me4000_ao_context *ao_context); +static int me4000_ao_synchronous_disable(struct me4000_ao_context *ao_context); static int me4000_ao_ex_trig_timeout(unsigned long *arg, - me4000_ao_context_t * ao_context); + struct me4000_ao_context *ao_context); static int me4000_ao_get_free_buffer(unsigned long *arg, - me4000_ao_context_t * ao_context); + struct me4000_ao_context *ao_context); /*----------------------------------------------------------------------------- Analog input stuff ---------------------------------------------------------------------------*/ -static int me4000_ai_single(me4000_ai_single_t *, me4000_ai_context_t *); +static int me4000_ai_single(struct me4000_ai_single *, + struct me4000_ai_context *); static int me4000_ai_ioctl_sing(struct inode *, struct file *, unsigned int, unsigned long); @@ -186,68 +171,69 @@ static int me4000_ai_fasync(int fd, struct file *file_p, int mode); static int me4000_ai_ioctl_ext(struct inode *, struct file *, unsigned int, unsigned long); -static int me4000_ai_prepare(me4000_ai_context_t * ai_context); -static int me4000_ai_reset(me4000_ai_context_t * ai_context); -static int me4000_ai_config(me4000_ai_config_t *, me4000_ai_context_t *); -static int me4000_ai_start(me4000_ai_context_t *); -static int me4000_ai_start_ex(unsigned long *, me4000_ai_context_t *); -static int me4000_ai_stop(me4000_ai_context_t *); -static int me4000_ai_immediate_stop(me4000_ai_context_t *); -static int me4000_ai_ex_trig_enable(me4000_ai_context_t *); -static int me4000_ai_ex_trig_disable(me4000_ai_context_t *); -static int me4000_ai_ex_trig_setup(me4000_ai_trigger_t *, - me4000_ai_context_t *); -static int me4000_ai_sc_setup(me4000_ai_sc_t * arg, - me4000_ai_context_t * ai_context); -static int me4000_ai_offset_enable(me4000_ai_context_t * ai_context); -static int me4000_ai_offset_disable(me4000_ai_context_t * ai_context); -static int me4000_ai_fullscale_enable(me4000_ai_context_t * ai_context); -static int me4000_ai_fullscale_disable(me4000_ai_context_t * ai_context); -static int me4000_ai_fsm_state(int *arg, me4000_ai_context_t * ai_context); +static int me4000_ai_prepare(struct me4000_ai_context *ai_context); +static int me4000_ai_reset(struct me4000_ai_context *ai_context); +static int me4000_ai_config(struct me4000_ai_config *, + struct me4000_ai_context *); +static int me4000_ai_start(struct me4000_ai_context *); +static int me4000_ai_start_ex(unsigned long *, struct me4000_ai_context *); +static int me4000_ai_stop(struct me4000_ai_context *); +static int me4000_ai_immediate_stop(struct me4000_ai_context *); +static int me4000_ai_ex_trig_enable(struct me4000_ai_context *); +static int me4000_ai_ex_trig_disable(struct me4000_ai_context *); +static int me4000_ai_ex_trig_setup(struct me4000_ai_trigger *, + struct me4000_ai_context *); +static int me4000_ai_sc_setup(struct me4000_ai_sc *arg, + struct me4000_ai_context *ai_context); +static int me4000_ai_offset_enable(struct me4000_ai_context *ai_context); +static int me4000_ai_offset_disable(struct me4000_ai_context *ai_context); +static int me4000_ai_fullscale_enable(struct me4000_ai_context *ai_context); +static int me4000_ai_fullscale_disable(struct me4000_ai_context *ai_context); +static int me4000_ai_fsm_state(int *arg, struct me4000_ai_context *ai_context); static int me4000_ai_get_count_buffer(unsigned long *arg, - me4000_ai_context_t * ai_context); + struct me4000_ai_context *ai_context); /*----------------------------------------------------------------------------- EEPROM stuff ---------------------------------------------------------------------------*/ -static int me4000_eeprom_read(me4000_eeprom_t * arg, - me4000_ai_context_t * ai_context); -static int me4000_eeprom_write(me4000_eeprom_t * arg, - me4000_ai_context_t * ai_context); -static unsigned short eeprom_read_cmd(me4000_ai_context_t * ai_context, - unsigned long cmd, int length); -static int eeprom_write_cmd(me4000_ai_context_t * ai_context, unsigned long cmd, - int length); +static int me4000_eeprom_read(struct me4000_eeprom *arg, + struct me4000_ai_context *ai_context); +static int me4000_eeprom_write(struct me4000_eeprom *arg, + struct me4000_ai_context *ai_context); /*----------------------------------------------------------------------------- Digital I/O stuff ---------------------------------------------------------------------------*/ static int me4000_dio_ioctl(struct inode *, struct file *, unsigned int, unsigned long); -static int me4000_dio_config(me4000_dio_config_t *, me4000_dio_context_t *); -static int me4000_dio_get_byte(me4000_dio_byte_t *, me4000_dio_context_t *); -static int me4000_dio_set_byte(me4000_dio_byte_t *, me4000_dio_context_t *); -static int me4000_dio_reset(me4000_dio_context_t *); +static int me4000_dio_config(struct me4000_dio_config *, + struct me4000_dio_context *); +static int me4000_dio_get_byte(struct me4000_dio_byte *, + struct me4000_dio_context *); +static int me4000_dio_set_byte(struct me4000_dio_byte *, + struct me4000_dio_context *); +static int me4000_dio_reset(struct me4000_dio_context *); /*----------------------------------------------------------------------------- Counter stuff ---------------------------------------------------------------------------*/ static int me4000_cnt_ioctl(struct inode *, struct file *, unsigned int, unsigned long); -static int me4000_cnt_config(me4000_cnt_config_t *, me4000_cnt_context_t *); -static int me4000_cnt_read(me4000_cnt_t *, me4000_cnt_context_t *); -static int me4000_cnt_write(me4000_cnt_t *, me4000_cnt_context_t *); -static int me4000_cnt_reset(me4000_cnt_context_t *); +static int me4000_cnt_config(struct me4000_cnt_config *, + struct me4000_cnt_context *); +static int me4000_cnt_read(struct me4000_cnt *, struct me4000_cnt_context *); +static int me4000_cnt_write(struct me4000_cnt *, struct me4000_cnt_context *); +static int me4000_cnt_reset(struct me4000_cnt_context *); /*----------------------------------------------------------------------------- External interrupt routines ---------------------------------------------------------------------------*/ static int me4000_ext_int_ioctl(struct inode *, struct file *, unsigned int, unsigned long); -static int me4000_ext_int_enable(me4000_ext_int_context_t *); -static int me4000_ext_int_disable(me4000_ext_int_context_t *); +static int me4000_ext_int_enable(struct me4000_ext_int_context *); +static int me4000_ext_int_disable(struct me4000_ext_int_context *); static int me4000_ext_int_count(unsigned long *arg, - me4000_ext_int_context_t * ext_int_context); + struct me4000_ext_int_context *ext_int_context); static int me4000_ext_int_fasync(int fd, struct file *file_ptr, int mode); /*----------------------------------------------------------------------------- @@ -260,27 +246,18 @@ static irqreturn_t me4000_ext_int_isr(int, void *); /*----------------------------------------------------------------------------- Inline functions ---------------------------------------------------------------------------*/ -static int inline me4000_buf_count(me4000_circ_buf_t, int); -static int inline me4000_buf_space(me4000_circ_buf_t, int); -static int inline me4000_space_to_end(me4000_circ_buf_t, int); -static int inline me4000_values_to_end(me4000_circ_buf_t, int); - -static void inline me4000_outb(unsigned char value, unsigned long port); -static void inline me4000_outl(unsigned long value, unsigned long port); -static unsigned long inline me4000_inl(unsigned long port); -static unsigned char inline me4000_inb(unsigned long port); -static int me4000_buf_count(me4000_circ_buf_t buf, int size) +static int inline me4000_buf_count(struct me4000_circ_buf buf, int size) { return ((buf.head - buf.tail) & (size - 1)); } -static int me4000_buf_space(me4000_circ_buf_t buf, int size) +static int inline me4000_buf_space(struct me4000_circ_buf buf, int size) { return ((buf.tail - (buf.head + 1)) & (size - 1)); } -static int me4000_values_to_end(me4000_circ_buf_t buf, int size) +static int inline me4000_values_to_end(struct me4000_circ_buf buf, int size) { int end; int n; @@ -289,7 +266,7 @@ static int me4000_values_to_end(me4000_circ_buf_t buf, int size) return (n < end) ? n : end; } -static int me4000_space_to_end(me4000_circ_buf_t buf, int size) +static int inline me4000_space_to_end(struct me4000_circ_buf buf, int size) { int end; int n; @@ -299,19 +276,19 @@ static int me4000_space_to_end(me4000_circ_buf_t buf, int size) return (n <= end) ? n : (end + 1); } -static void me4000_outb(unsigned char value, unsigned long port) +static void inline me4000_outb(unsigned char value, unsigned long port) { PORT_PDEBUG("--> 0x%02X port 0x%04lX\n", value, port); outb(value, port); } -static void me4000_outl(unsigned long value, unsigned long port) +static void inline me4000_outl(unsigned long value, unsigned long port) { PORT_PDEBUG("--> 0x%08lX port 0x%04lX\n", value, port); outl(value, port); } -static unsigned long me4000_inl(unsigned long port) +static unsigned long inline me4000_inl(unsigned long port) { unsigned long value; value = inl(port); @@ -319,7 +296,7 @@ static unsigned long me4000_inl(unsigned long port) return value; } -static unsigned char me4000_inb(unsigned long port) +static unsigned char inline me4000_inb(unsigned long port) { unsigned char value; value = inb(port); @@ -327,102 +304,102 @@ static unsigned char me4000_inb(unsigned long port) return value; } -struct pci_driver me4000_driver = { +static struct pci_driver me4000_driver = { .name = ME4000_NAME, .id_table = me4000_pci_table, .probe = me4000_probe }; static struct file_operations me4000_ao_fops_sing = { - owner:THIS_MODULE, - write:me4000_ao_write_sing, - ioctl:me4000_ao_ioctl_sing, - open:me4000_open, - release:me4000_release, + .owner = THIS_MODULE, + .write = me4000_ao_write_sing, + .ioctl = me4000_ao_ioctl_sing, + .open = me4000_open, + .release = me4000_release, }; static struct file_operations me4000_ao_fops_wrap = { - owner:THIS_MODULE, - write:me4000_ao_write_wrap, - ioctl:me4000_ao_ioctl_wrap, - open:me4000_open, - release:me4000_release, + .owner = THIS_MODULE, + .write = me4000_ao_write_wrap, + .ioctl = me4000_ao_ioctl_wrap, + .open = me4000_open, + .release = me4000_release, }; static struct file_operations me4000_ao_fops_cont = { - owner:THIS_MODULE, - write:me4000_ao_write_cont, - poll:me4000_ao_poll_cont, - ioctl:me4000_ao_ioctl_cont, - open:me4000_open, - release:me4000_release, - fsync:me4000_ao_fsync_cont, + .owner = THIS_MODULE, + .write = me4000_ao_write_cont, + .poll = me4000_ao_poll_cont, + .ioctl = me4000_ao_ioctl_cont, + .open = me4000_open, + .release = me4000_release, + .fsync = me4000_ao_fsync_cont, }; static struct file_operations me4000_ai_fops_sing = { - owner:THIS_MODULE, - ioctl:me4000_ai_ioctl_sing, - open:me4000_open, - release:me4000_release, + .owner = THIS_MODULE, + .ioctl = me4000_ai_ioctl_sing, + .open = me4000_open, + .release = me4000_release, }; static struct file_operations me4000_ai_fops_cont_sw = { - owner:THIS_MODULE, - read:me4000_ai_read, - poll:me4000_ai_poll, - ioctl:me4000_ai_ioctl_sw, - open:me4000_open, - release:me4000_release, - fasync:me4000_ai_fasync, + .owner = THIS_MODULE, + .read = me4000_ai_read, + .poll = me4000_ai_poll, + .ioctl = me4000_ai_ioctl_sw, + .open = me4000_open, + .release = me4000_release, + .fasync = me4000_ai_fasync, }; static struct file_operations me4000_ai_fops_cont_et = { - owner:THIS_MODULE, - read:me4000_ai_read, - poll:me4000_ai_poll, - ioctl:me4000_ai_ioctl_ext, - open:me4000_open, - release:me4000_release, + .owner = THIS_MODULE, + .read = me4000_ai_read, + .poll = me4000_ai_poll, + .ioctl = me4000_ai_ioctl_ext, + .open = me4000_open, + .release = me4000_release, }; static struct file_operations me4000_ai_fops_cont_et_value = { - owner:THIS_MODULE, - read:me4000_ai_read, - poll:me4000_ai_poll, - ioctl:me4000_ai_ioctl_ext, - open:me4000_open, - release:me4000_release, + .owner = THIS_MODULE, + .read = me4000_ai_read, + .poll = me4000_ai_poll, + .ioctl = me4000_ai_ioctl_ext, + .open = me4000_open, + .release = me4000_release, }; static struct file_operations me4000_ai_fops_cont_et_chanlist = { - owner:THIS_MODULE, - read:me4000_ai_read, - poll:me4000_ai_poll, - ioctl:me4000_ai_ioctl_ext, - open:me4000_open, - release:me4000_release, + .owner = THIS_MODULE, + .read = me4000_ai_read, + .poll = me4000_ai_poll, + .ioctl = me4000_ai_ioctl_ext, + .open = me4000_open, + .release = me4000_release, }; static struct file_operations me4000_dio_fops = { - owner:THIS_MODULE, - ioctl:me4000_dio_ioctl, - open:me4000_open, - release:me4000_release, + .owner = THIS_MODULE, + .ioctl = me4000_dio_ioctl, + .open = me4000_open, + .release = me4000_release, }; static struct file_operations me4000_cnt_fops = { - owner:THIS_MODULE, - ioctl:me4000_cnt_ioctl, - open:me4000_open, - release:me4000_release, + .owner = THIS_MODULE, + .ioctl = me4000_cnt_ioctl, + .open = me4000_open, + .release = me4000_release, }; static struct file_operations me4000_ext_int_fops = { - owner:THIS_MODULE, - ioctl:me4000_ext_int_ioctl, - open:me4000_open, - release:me4000_release, - fasync:me4000_ext_int_fasync, + .owner = THIS_MODULE, + .ioctl = me4000_ext_int_ioctl, + .open = me4000_open, + .release = me4000_release, + .fasync = me4000_ext_int_fasync, }; static struct file_operations *me4000_ao_fops_array[] = { @@ -439,9 +416,9 @@ static struct file_operations *me4000_ai_fops_array[] = { &me4000_ai_fops_cont_et_chanlist, // work through one channel list by external trigger }; -int __init me4000_init_module(void) +static int __init me4000_init_module(void) { - int result = 0; + int result; CALL_PDEBUG("init_module() is executed\n"); @@ -533,26 +510,26 @@ int __init me4000_init_module(void) return 0; - INIT_ERROR_7: +INIT_ERROR_7: unregister_chrdev(me4000_ext_int_major_driver_no, ME4000_EXT_INT_NAME); - INIT_ERROR_6: +INIT_ERROR_6: unregister_chrdev(me4000_cnt_major_driver_no, ME4000_CNT_NAME); - INIT_ERROR_5: +INIT_ERROR_5: unregister_chrdev(me4000_dio_major_driver_no, ME4000_DIO_NAME); - INIT_ERROR_4: +INIT_ERROR_4: unregister_chrdev(me4000_ai_major_driver_no, ME4000_AI_NAME); - INIT_ERROR_3: +INIT_ERROR_3: unregister_chrdev(me4000_ao_major_driver_no, ME4000_AO_NAME); - INIT_ERROR_2: +INIT_ERROR_2: pci_unregister_driver(&me4000_driver); clear_board_info_list(); - INIT_ERROR_1: +INIT_ERROR_1: return result; } @@ -562,18 +539,18 @@ static void clear_board_info_list(void) { struct list_head *board_p; struct list_head *dac_p; - me4000_info_t *board_info; - me4000_ao_context_t *ao_context; + struct me4000_info *board_info; + struct me4000_ao_context *ao_context; /* Clear context lists */ for (board_p = me4000_board_info_list.next; board_p != &me4000_board_info_list; board_p = board_p->next) { - board_info = list_entry(board_p, me4000_info_t, list); + board_info = list_entry(board_p, struct me4000_info, list); /* Clear analog output context list */ while (!list_empty(&board_info->ao_context_list)) { dac_p = board_info->ao_context_list.next; ao_context = - list_entry(dac_p, me4000_ao_context_t, list); + list_entry(dac_p, struct me4000_ao_context, list); me4000_ao_reset(ao_context); free_irq(ao_context->irq, ao_context); if (ao_context->circ_buf.buf) @@ -600,14 +577,14 @@ static void clear_board_info_list(void) /* Clear the board info list */ while (!list_empty(&me4000_board_info_list)) { board_p = me4000_board_info_list.next; - board_info = list_entry(board_p, me4000_info_t, list); + board_info = list_entry(board_p, struct me4000_info, list); pci_release_regions(board_info->pci_dev_p); list_del(board_p); kfree(board_info); } } -static int get_registers(struct pci_dev *dev, me4000_info_t * board_info) +static int get_registers(struct pci_dev *dev, struct me4000_info *board_info) { /*--------------------------- plx regbase ---------------------------------*/ @@ -667,20 +644,20 @@ static int get_registers(struct pci_dev *dev, me4000_info_t * board_info) } static int init_board_info(struct pci_dev *pci_dev_p, - me4000_info_t * board_info) + struct me4000_info *board_info) { int i; int result; struct list_head *board_p; board_info->pci_dev_p = pci_dev_p; - for (i = 0; i < ME4000_BOARD_VERSIONS; i++) { + for (i = 0; i < ARRAY_SIZE(me4000_boards); i++) { if (me4000_boards[i].device_id == pci_dev_p->device) { board_info->board_p = &me4000_boards[i]; break; } } - if (i == ME4000_BOARD_VERSIONS) { + if (i == ARRAY_SIZE(me4000_boards)) { printk(KERN_ERR "ME4000:init_board_info():Device ID not valid\n"); return -ENODEV; @@ -755,21 +732,21 @@ static int init_board_info(struct pci_dev *pci_dev_p, return 0; } -static int alloc_ao_contexts(me4000_info_t * info) +static int alloc_ao_contexts(struct me4000_info *info) { int i; int err; - me4000_ao_context_t *ao_context; + struct me4000_ao_context *ao_context; for (i = 0; i < info->board_p->ao.count; i++) { - ao_context = kmalloc(sizeof(me4000_ao_context_t), GFP_KERNEL); + ao_context = kzalloc(sizeof(struct me4000_ao_context), + GFP_KERNEL); if (!ao_context) { printk(KERN_ERR "alloc_ao_contexts():Can't get memory for ao context\n"); release_ao_contexts(info); return -ENOMEM; } - memset(ao_context, 0, sizeof(me4000_ao_context_t)); spin_lock_init(&ao_context->use_lock); spin_lock_init(&ao_context->int_lock); @@ -780,15 +757,13 @@ static int alloc_ao_contexts(me4000_info_t * info) if (info->board_p->ao.fifo_count) { /* Allocate circular buffer */ ao_context->circ_buf.buf = - kmalloc(ME4000_AO_BUFFER_SIZE, GFP_KERNEL); + kzalloc(ME4000_AO_BUFFER_SIZE, GFP_KERNEL); if (!ao_context->circ_buf.buf) { printk(KERN_ERR "alloc_ao_contexts():Can't get circular buffer\n"); release_ao_contexts(info); return -ENOMEM; } - memset(ao_context->circ_buf.buf, 0, - ME4000_AO_BUFFER_SIZE); /* Clear the circular buffer */ ao_context->circ_buf.head = 0; @@ -872,9 +847,8 @@ static int alloc_ao_contexts(me4000_info_t * info) ME4000_NAME, ao_context); if (err) { printk(KERN_ERR - "alloc_ao_contexts():Can't get interrupt line"); - if (ao_context->circ_buf.buf) - kfree(ao_context->circ_buf.buf); + "%s:Can't get interrupt line", __func__); + kfree(ao_context->circ_buf.buf); kfree(ao_context); release_ao_contexts(info); return -ENODEV; @@ -888,35 +862,34 @@ static int alloc_ao_contexts(me4000_info_t * info) return 0; } -static void release_ao_contexts(me4000_info_t * board_info) +static void release_ao_contexts(struct me4000_info *board_info) { struct list_head *dac_p; - me4000_ao_context_t *ao_context; + struct me4000_ao_context *ao_context; /* Clear analog output context list */ while (!list_empty(&board_info->ao_context_list)) { dac_p = board_info->ao_context_list.next; - ao_context = list_entry(dac_p, me4000_ao_context_t, list); + ao_context = list_entry(dac_p, struct me4000_ao_context, list); free_irq(ao_context->irq, ao_context); - if (ao_context->circ_buf.buf) - kfree(ao_context->circ_buf.buf); + kfree(ao_context->circ_buf.buf); list_del(dac_p); kfree(ao_context); } } -static int alloc_ai_context(me4000_info_t * info) +static int alloc_ai_context(struct me4000_info *info) { - me4000_ai_context_t *ai_context; + struct me4000_ai_context *ai_context; if (info->board_p->ai.count) { - ai_context = kmalloc(sizeof(me4000_ai_context_t), GFP_KERNEL); + ai_context = kzalloc(sizeof(struct me4000_ai_context), + GFP_KERNEL); if (!ai_context) { printk(KERN_ERR "ME4000:alloc_ai_context():Can't get memory for ai context\n"); return -ENOMEM; } - memset(ai_context, 0, sizeof(me4000_ai_context_t)); info->ai_context = ai_context; @@ -958,18 +931,18 @@ static int alloc_ai_context(me4000_info_t * info) return 0; } -static int alloc_dio_context(me4000_info_t * info) +static int alloc_dio_context(struct me4000_info *info) { - me4000_dio_context_t *dio_context; + struct me4000_dio_context *dio_context; if (info->board_p->dio.count) { - dio_context = kmalloc(sizeof(me4000_dio_context_t), GFP_KERNEL); + dio_context = kzalloc(sizeof(struct me4000_dio_context), + GFP_KERNEL); if (!dio_context) { printk(KERN_ERR "ME4000:alloc_dio_context():Can't get memory for dio context\n"); return -ENOMEM; } - memset(dio_context, 0, sizeof(me4000_dio_context_t)); info->dio_context = dio_context; @@ -995,18 +968,18 @@ static int alloc_dio_context(me4000_info_t * info) return 0; } -static int alloc_cnt_context(me4000_info_t * info) +static int alloc_cnt_context(struct me4000_info *info) { - me4000_cnt_context_t *cnt_context; + struct me4000_cnt_context *cnt_context; if (info->board_p->cnt.count) { - cnt_context = kmalloc(sizeof(me4000_cnt_context_t), GFP_KERNEL); + cnt_context = kzalloc(sizeof(struct me4000_cnt_context), + GFP_KERNEL); if (!cnt_context) { printk(KERN_ERR "ME4000:alloc_cnt_context():Can't get memory for cnt context\n"); return -ENOMEM; } - memset(cnt_context, 0, sizeof(me4000_cnt_context_t)); info->cnt_context = cnt_context; @@ -1026,19 +999,18 @@ static int alloc_cnt_context(me4000_info_t * info) return 0; } -static int alloc_ext_int_context(me4000_info_t * info) +static int alloc_ext_int_context(struct me4000_info *info) { - me4000_ext_int_context_t *ext_int_context; + struct me4000_ext_int_context *ext_int_context; if (info->board_p->cnt.count) { ext_int_context = - kmalloc(sizeof(me4000_ext_int_context_t), GFP_KERNEL); + kzalloc(sizeof(struct me4000_ext_int_context), GFP_KERNEL); if (!ext_int_context) { printk(KERN_ERR "ME4000:alloc_ext_int_context():Can't get memory for cnt context\n"); return -ENOMEM; } - memset(ext_int_context, 0, sizeof(me4000_ext_int_context_t)); info->ext_int_context = ext_int_context; @@ -1060,19 +1032,18 @@ static int alloc_ext_int_context(me4000_info_t * info) static int me4000_probe(struct pci_dev *dev, const struct pci_device_id *id) { int result = 0; - me4000_info_t *board_info; + struct me4000_info *board_info; CALL_PDEBUG("me4000_probe() is executed\n"); /* Allocate structure for board context */ - board_info = kmalloc(sizeof(me4000_info_t), GFP_KERNEL); + board_info = kzalloc(sizeof(struct me4000_info), GFP_KERNEL); if (!board_info) { printk(KERN_ERR "ME4000:Can't get memory for board info structure\n"); result = -ENOMEM; goto PROBE_ERROR_1; } - memset(board_info, 0, sizeof(me4000_info_t)); /* Add to global linked list */ list_add_tail(&board_info->list, &me4000_board_info_list); @@ -1080,70 +1051,70 @@ static int me4000_probe(struct pci_dev *dev, const struct pci_device_id *id) /* Get the PCI base registers */ result = get_registers(dev, board_info); if (result) { - printk(KERN_ERR "me4000_probe():Cannot get registers\n"); + printk(KERN_ERR "%s:Cannot get registers\n", __func__); goto PROBE_ERROR_2; } /* Enable the device */ result = pci_enable_device(dev); if (result < 0) { - printk(KERN_ERR "me4000_probe():Cannot enable PCI device\n"); + printk(KERN_ERR "%s:Cannot enable PCI device\n", __func__); goto PROBE_ERROR_2; } /* Request the PCI register regions */ result = pci_request_regions(dev, ME4000_NAME); if (result < 0) { - printk(KERN_ERR "me4000_probe():Cannot request I/O regions\n"); + printk(KERN_ERR "%s:Cannot request I/O regions\n", __func__); goto PROBE_ERROR_2; } /* Initialize board info */ result = init_board_info(dev, board_info); if (result) { - printk(KERN_ERR "me4000_probe():Cannot init baord info\n"); + printk(KERN_ERR "%s:Cannot init baord info\n", __func__); goto PROBE_ERROR_3; } /* Download the xilinx firmware */ result = me4000_xilinx_download(board_info); if (result) { - printk(KERN_ERR "me4000_probe:Can't download firmware\n"); + printk(KERN_ERR "%s:Can't download firmware\n", __func__); goto PROBE_ERROR_3; } /* Make a hardware reset */ result = me4000_reset_board(board_info); if (result) { - printk(KERN_ERR "me4000_probe:Can't reset board\n"); + printk(KERN_ERR "%s :Can't reset board\n", __func__); goto PROBE_ERROR_3; } /* Allocate analog output context structures */ result = alloc_ao_contexts(board_info); if (result) { - printk(KERN_ERR "me4000_probe():Cannot allocate ao contexts\n"); + printk(KERN_ERR "%s:Cannot allocate ao contexts\n", __func__); goto PROBE_ERROR_3; } /* Allocate analog input context */ result = alloc_ai_context(board_info); if (result) { - printk(KERN_ERR "me4000_probe():Cannot allocate ai context\n"); + printk(KERN_ERR "%s:Cannot allocate ai context\n", __func__); goto PROBE_ERROR_4; } /* Allocate digital I/O context */ result = alloc_dio_context(board_info); if (result) { - printk(KERN_ERR "me4000_probe():Cannot allocate dio context\n"); + printk(KERN_ERR "%s:Cannot allocate dio context\n", __func__); goto PROBE_ERROR_5; } /* Allocate counter context */ result = alloc_cnt_context(board_info); if (result) { - printk(KERN_ERR "me4000_probe():Cannot allocate cnt context\n"); + printk(KERN_ERR "%s:Cannot allocate cnt context\n", __func__); goto PROBE_ERROR_6; } @@ -1151,36 +1122,36 @@ static int me4000_probe(struct pci_dev *dev, const struct pci_device_id *id) result = alloc_ext_int_context(board_info); if (result) { printk(KERN_ERR - "me4000_probe():Cannot allocate ext_int context\n"); + "%s:Cannot allocate ext_int context\n", __func__); goto PROBE_ERROR_7; } return 0; - PROBE_ERROR_7: +PROBE_ERROR_7: kfree(board_info->cnt_context); - PROBE_ERROR_6: +PROBE_ERROR_6: kfree(board_info->dio_context); - PROBE_ERROR_5: +PROBE_ERROR_5: kfree(board_info->ai_context); - PROBE_ERROR_4: +PROBE_ERROR_4: release_ao_contexts(board_info); - PROBE_ERROR_3: +PROBE_ERROR_3: pci_release_regions(dev); - PROBE_ERROR_2: +PROBE_ERROR_2: list_del(&board_info->list); kfree(board_info); - PROBE_ERROR_1: +PROBE_ERROR_1: return result; } -static int me4000_xilinx_download(me4000_info_t * info) +static int me4000_xilinx_download(struct me4000_info *info) { int size = 0; u32 value = 0; @@ -1211,7 +1182,7 @@ static int me4000_xilinx_download(me4000_info_t * info) /* Wait until /INIT pin is set */ udelay(20); if (!inl(info->plx_regbase + PLX_INTCSR) & 0x20) { - printk(KERN_ERR "me4000_xilinx_download():Can't init Xilinx\n"); + printk(KERN_ERR "%s:Can't init Xilinx\n", __func__); return -EIO; } @@ -1232,7 +1203,7 @@ static int me4000_xilinx_download(me4000_info_t * info) /* Check if BUSY flag is low */ if (inl(info->plx_regbase + PLX_ICR) & 0x20) { printk(KERN_ERR - "me4000_xilinx_download():Xilinx is still busy (idx = %d)\n", + "%s:Xilinx is still busy (idx = %d)\n", __func__, idx); return -EIO; } @@ -1246,9 +1217,9 @@ static int me4000_xilinx_download(me4000_info_t * info) PDEBUG("me4000_xilinx_download():Download was successful\n"); } else { printk(KERN_ERR - "ME4000:me4000_xilinx_download():DONE flag is not set\n"); + "ME4000:%s:DONE flag is not set\n", __func__); printk(KERN_ERR - "ME4000:me4000_xilinx_download():Download not succesful\n"); + "ME4000:%s:Download not succesful\n", __func__); return -EIO; } @@ -1260,7 +1231,7 @@ static int me4000_xilinx_download(me4000_info_t * info) return 0; } -static int me4000_reset_board(me4000_info_t * info) +static int me4000_reset_board(struct me4000_info *info) { unsigned long icr; @@ -1314,12 +1285,12 @@ static int me4000_open(struct inode *inode_p, struct file *file_p) int err = 0; int i; struct list_head *ptr; - me4000_info_t *board_info = NULL; - me4000_ao_context_t *ao_context = NULL; - me4000_ai_context_t *ai_context = NULL; - me4000_dio_context_t *dio_context = NULL; - me4000_cnt_context_t *cnt_context = NULL; - me4000_ext_int_context_t *ext_int_context = NULL; + struct me4000_info *board_info = NULL; + struct me4000_ao_context *ao_context = NULL; + struct me4000_ai_context *ai_context = NULL; + struct me4000_dio_context *dio_context = NULL; + struct me4000_cnt_context *cnt_context = NULL; + struct me4000_ext_int_context *ext_int_context = NULL; CALL_PDEBUG("me4000_open() is executed\n"); @@ -1335,7 +1306,7 @@ static int me4000_open(struct inode *inode_p, struct file *file_p) /* Search for the board context */ for (ptr = me4000_board_info_list.next, i = 0; ptr != &me4000_board_info_list; ptr = ptr->next, i++) { - board_info = list_entry(ptr, me4000_info_t, list); + board_info = list_entry(ptr, struct me4000_info, list); if (i == board) break; } @@ -1351,7 +1322,8 @@ static int me4000_open(struct inode *inode_p, struct file *file_p) for (ptr = board_info->ao_context_list.next, i = 0; ptr != &board_info->ao_context_list; ptr = ptr->next, i++) { - ao_context = list_entry(ptr, me4000_ao_context_t, list); + ao_context = list_entry(ptr, struct me4000_ao_context, + list); if (i == dev) break; } @@ -1415,7 +1387,7 @@ static int me4000_open(struct inode *inode_p, struct file *file_p) /* Search for the board context */ for (ptr = me4000_board_info_list.next, i = 0; ptr != &me4000_board_info_list; ptr = ptr->next, i++) { - board_info = list_entry(ptr, me4000_info_t, list); + board_info = list_entry(ptr, struct me4000_info, list); if (i == board) break; } @@ -1469,7 +1441,7 @@ static int me4000_open(struct inode *inode_p, struct file *file_p) /* Search for the board context */ for (ptr = me4000_board_info_list.next; ptr != &me4000_board_info_list; ptr = ptr->next) { - board_info = list_entry(ptr, me4000_info_t, list); + board_info = list_entry(ptr, struct me4000_info, list); if (board_info->board_count == board) break; } @@ -1514,7 +1486,7 @@ static int me4000_open(struct inode *inode_p, struct file *file_p) /* Search for the board context */ for (ptr = me4000_board_info_list.next; ptr != &me4000_board_info_list; ptr = ptr->next) { - board_info = list_entry(ptr, me4000_info_t, list); + board_info = list_entry(ptr, struct me4000_info, list); if (board_info->board_count == board) break; } @@ -1557,7 +1529,7 @@ static int me4000_open(struct inode *inode_p, struct file *file_p) /* Search for the board context */ for (ptr = me4000_board_info_list.next; ptr != &me4000_board_info_list; ptr = ptr->next) { - board_info = list_entry(ptr, me4000_info_t, list); + board_info = list_entry(ptr, struct me4000_info, list); if (board_info->board_count == board) break; } @@ -1613,11 +1585,11 @@ static int me4000_open(struct inode *inode_p, struct file *file_p) static int me4000_release(struct inode *inode_p, struct file *file_p) { - me4000_ao_context_t *ao_context; - me4000_ai_context_t *ai_context; - me4000_dio_context_t *dio_context; - me4000_cnt_context_t *cnt_context; - me4000_ext_int_context_t *ext_int_context; + struct me4000_ao_context *ao_context; + struct me4000_ai_context *ai_context; + struct me4000_dio_context *dio_context; + struct me4000_cnt_context *cnt_context; + struct me4000_ext_int_context *ext_int_context; CALL_PDEBUG("me4000_release() is executed\n"); @@ -1677,7 +1649,7 @@ static int me4000_release(struct inode *inode_p, struct file *file_p) /*------------------------------- Analog output stuff --------------------------------------*/ -static int me4000_ao_prepare(me4000_ao_context_t * ao_context) +static int me4000_ao_prepare(struct me4000_ao_context *ao_context) { unsigned long flags; @@ -1756,7 +1728,7 @@ static int me4000_ao_prepare(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_reset(me4000_ao_context_t * ao_context) +static int me4000_ao_reset(struct me4000_ao_context *ao_context) { u32 tmp; wait_queue_head_t queue; @@ -1777,9 +1749,10 @@ static int me4000_ao_reset(me4000_ao_context_t * ao_context) tmp |= ME4000_AO_CTRL_BIT_IMMEDIATE_STOP; me4000_outl(tmp, ao_context->ctrl_reg); - while (inl(ao_context->status_reg) & ME4000_AO_STATUS_BIT_FSM) { - sleep_on_timeout(&queue, 1); - } + wait_event_timeout(queue, + (inl(ao_context->status_reg) & + ME4000_AO_STATUS_BIT_FSM) == 0, + 1); /* Set to transparent mode */ me4000_ao_simultaneous_disable(ao_context); @@ -1812,9 +1785,10 @@ static int me4000_ao_reset(me4000_ao_context_t * ao_context) me4000_outl(tmp, ao_context->ctrl_reg); spin_unlock_irqrestore(&ao_context->int_lock, flags); - while (inl(ao_context->status_reg) & ME4000_AO_STATUS_BIT_FSM) { - sleep_on_timeout(&queue, 1); - } + wait_event_timeout(queue, + (inl(ao_context->status_reg) & + ME4000_AO_STATUS_BIT_FSM) == 0, + 1); /* Clear the circular buffer */ ao_context->circ_buf.head = 0; @@ -1853,9 +1827,9 @@ static int me4000_ao_reset(me4000_ao_context_t * ao_context) } static ssize_t me4000_ao_write_sing(struct file *filep, const char *buff, - size_t cnt, loff_t * offp) + size_t cnt, loff_t *offp) { - me4000_ao_context_t *ao_context = filep->private_data; + struct me4000_ao_context *ao_context = filep->private_data; u32 value; const u16 *buffer = (const u16 *)buff; @@ -1863,13 +1837,13 @@ static ssize_t me4000_ao_write_sing(struct file *filep, const char *buff, if (cnt != 2) { printk(KERN_ERR - "me4000_ao_write_sing():Write count is not 2\n"); + "%s:Write count is not 2\n", __func__); return -EINVAL; } if (get_user(value, buffer)) { printk(KERN_ERR - "me4000_ao_write_sing():Cannot copy data from user\n"); + "%s:Cannot copy data from user\n", __func__); return -EFAULT; } @@ -1879,9 +1853,9 @@ static ssize_t me4000_ao_write_sing(struct file *filep, const char *buff, } static ssize_t me4000_ao_write_wrap(struct file *filep, const char *buff, - size_t cnt, loff_t * offp) + size_t cnt, loff_t *offp) { - me4000_ao_context_t *ao_context = filep->private_data; + struct me4000_ao_context *ao_context = filep->private_data; size_t i; u32 value; u32 tmp; @@ -1893,13 +1867,13 @@ static ssize_t me4000_ao_write_wrap(struct file *filep, const char *buff, /* Check if a conversion is already running */ if (inl(ao_context->status_reg) & ME4000_AO_STATUS_BIT_FSM) { printk(KERN_ERR - "ME4000:me4000_ao_write_wrap():There is already a conversion running\n"); + "%s:There is already a conversion running\n", __func__); return -EBUSY; } if (count > ME4000_AO_FIFO_COUNT) { printk(KERN_ERR - "me4000_ao_write_wrap():Can't load more than %d values\n", + "%s:Can't load more than %d values\n", __func__, ME4000_AO_FIFO_COUNT); return -ENOSPC; } @@ -1914,7 +1888,7 @@ static ssize_t me4000_ao_write_wrap(struct file *filep, const char *buff, for (i = 0; i < count; i++) { if (get_user(value, buffer + i)) { printk(KERN_ERR - "me4000_ao_write_single():Cannot copy data from user\n"); + "%s:Cannot copy data from user\n", __func__); return -EFAULT; } if (((ao_context->fifo_reg & 0xFF) == ME4000_AO_01_FIFO_REG) @@ -1928,9 +1902,9 @@ static ssize_t me4000_ao_write_wrap(struct file *filep, const char *buff, } static ssize_t me4000_ao_write_cont(struct file *filep, const char *buff, - size_t cnt, loff_t * offp) + size_t cnt, loff_t *offp) { - me4000_ao_context_t *ao_context = filep->private_data; + struct me4000_ao_context *ao_context = filep->private_data; const u16 *buffer = (const u16 *)buff; size_t count = cnt / 2; unsigned long flags; @@ -2154,9 +2128,9 @@ static ssize_t me4000_ao_write_cont(struct file *filep, const char *buff, return 2 * ret; } -static unsigned int me4000_ao_poll_cont(struct file *file_p, poll_table * wait) +static unsigned int me4000_ao_poll_cont(struct file *file_p, poll_table *wait) { - me4000_ao_context_t *ao_context; + struct me4000_ao_context *ao_context; unsigned long mask = 0; CALL_PDEBUG("me4000_ao_poll_cont() is executed\n"); @@ -2177,7 +2151,7 @@ static unsigned int me4000_ao_poll_cont(struct file *file_p, poll_table * wait) static int me4000_ao_fsync_cont(struct file *file_p, struct dentry *dentry_p, int datasync) { - me4000_ao_context_t *ao_context; + struct me4000_ao_context *ao_context; wait_queue_head_t queue; CALL_PDEBUG("me4000_ao_fsync_cont() is executed\n"); @@ -2187,15 +2161,19 @@ static int me4000_ao_fsync_cont(struct file *file_p, struct dentry *dentry_p, while (inl(ao_context->status_reg) & ME4000_AO_STATUS_BIT_FSM) { interruptible_sleep_on_timeout(&queue, 1); + wait_event_interruptible_timeout(queue, + !(inl(ao_context->status_reg) & ME4000_AO_STATUS_BIT_FSM), + 1); if (ao_context->pipe_flag) { printk(KERN_ERR - "me4000_ao_fsync_cont():Broken pipe detected\n"); + "%s:Broken pipe detected\n", __func__); return -EPIPE; } if (signal_pending(current)) { printk(KERN_ERR - "me4000_ao_fsync_cont():Wait on state machine interrupted\n"); + "%s:Wait on state machine interrupted\n", + __func__); return -EINTR; } } @@ -2206,7 +2184,7 @@ static int me4000_ao_fsync_cont(struct file *file_p, struct dentry *dentry_p, static int me4000_ao_ioctl_sing(struct inode *inode_p, struct file *file_p, unsigned int service, unsigned long arg) { - me4000_ao_context_t *ao_context; + struct me4000_ao_context *ao_context; CALL_PDEBUG("me4000_ao_ioctl_sing() is executed\n"); @@ -2229,7 +2207,7 @@ static int me4000_ao_ioctl_sing(struct inode *inode_p, struct file *file_p, case ME4000_AO_PRELOAD_UPDATE: return me4000_ao_preload_update(ao_context); case ME4000_GET_USER_INFO: - return me4000_get_user_info((me4000_user_info_t *) arg, + return me4000_get_user_info((struct me4000_user_info *)arg, ao_context->board_info); case ME4000_AO_SIMULTANEOUS_EX_TRIG: return me4000_ao_simultaneous_ex_trig(ao_context); @@ -2239,8 +2217,9 @@ static int me4000_ao_ioctl_sing(struct inode *inode_p, struct file *file_p, return me4000_ao_simultaneous_disable(ao_context); case ME4000_AO_SIMULTANEOUS_UPDATE: return - me4000_ao_simultaneous_update((me4000_ao_channel_list_t *) - arg, ao_context); + me4000_ao_simultaneous_update( + (struct me4000_ao_channel_list *)arg, + ao_context); case ME4000_AO_EX_TRIG_TIMEOUT: return me4000_ao_ex_trig_timeout((unsigned long *)arg, ao_context); @@ -2258,7 +2237,7 @@ static int me4000_ao_ioctl_sing(struct inode *inode_p, struct file *file_p, static int me4000_ao_ioctl_wrap(struct inode *inode_p, struct file *file_p, unsigned int service, unsigned long arg) { - me4000_ao_context_t *ao_context; + struct me4000_ao_context *ao_context; CALL_PDEBUG("me4000_ao_ioctl_wrap() is executed\n"); @@ -2287,7 +2266,7 @@ static int me4000_ao_ioctl_wrap(struct inode *inode_p, struct file *file_p, case ME4000_AO_EX_TRIG_DISABLE: return me4000_ao_ex_trig_disable(ao_context); case ME4000_GET_USER_INFO: - return me4000_get_user_info((me4000_user_info_t *) arg, + return me4000_get_user_info((struct me4000_user_info *)arg, ao_context->board_info); case ME4000_AO_FSM_STATE: return me4000_ao_fsm_state((int *)arg, ao_context); @@ -2310,7 +2289,7 @@ static int me4000_ao_ioctl_wrap(struct inode *inode_p, struct file *file_p, static int me4000_ao_ioctl_cont(struct inode *inode_p, struct file *file_p, unsigned int service, unsigned long arg) { - me4000_ao_context_t *ao_context; + struct me4000_ao_context *ao_context; CALL_PDEBUG("me4000_ao_ioctl_cont() is executed\n"); @@ -2345,7 +2324,7 @@ static int me4000_ao_ioctl_cont(struct inode *inode_p, struct file *file_p, case ME4000_AO_FSM_STATE: return me4000_ao_fsm_state((int *)arg, ao_context); case ME4000_GET_USER_INFO: - return me4000_get_user_info((me4000_user_info_t *) arg, + return me4000_get_user_info((struct me4000_user_info *)arg, ao_context->board_info); case ME4000_AO_SYNCHRONOUS_EX_TRIG: return me4000_ao_synchronous_ex_trig(ao_context); @@ -2362,7 +2341,8 @@ static int me4000_ao_ioctl_cont(struct inode *inode_p, struct file *file_p, return 0; } -static int me4000_ao_start(unsigned long *arg, me4000_ao_context_t * ao_context) +static int me4000_ao_start(unsigned long *arg, + struct me4000_ao_context *ao_context) { u32 tmp; wait_queue_head_t queue; @@ -2412,7 +2392,7 @@ static int me4000_ao_start(unsigned long *arg, me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_stop(me4000_ao_context_t * ao_context) +static int me4000_ao_stop(struct me4000_ao_context *ao_context) { u32 tmp; wait_queue_head_t queue; @@ -2445,7 +2425,7 @@ static int me4000_ao_stop(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_immediate_stop(me4000_ao_context_t * ao_context) +static int me4000_ao_immediate_stop(struct me4000_ao_context *ao_context) { u32 tmp; wait_queue_head_t queue; @@ -2477,8 +2457,8 @@ static int me4000_ao_immediate_stop(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_timer_set_divisor(u32 * arg, - me4000_ao_context_t * ao_context) +static int me4000_ao_timer_set_divisor(u32 *arg, + struct me4000_ao_context *ao_context) { u32 divisor; u32 tmp; @@ -2518,7 +2498,7 @@ static int me4000_ao_timer_set_divisor(u32 * arg, } static int me4000_ao_ex_trig_set_edge(int *arg, - me4000_ao_context_t * ao_context) + struct me4000_ao_context *ao_context) { int mode; u32 tmp; @@ -2569,7 +2549,7 @@ static int me4000_ao_ex_trig_set_edge(int *arg, return 0; } -static int me4000_ao_ex_trig_enable(me4000_ao_context_t * ao_context) +static int me4000_ao_ex_trig_enable(struct me4000_ao_context *ao_context) { u32 tmp; unsigned long flags; @@ -2593,7 +2573,7 @@ static int me4000_ao_ex_trig_enable(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_ex_trig_disable(me4000_ao_context_t * ao_context) +static int me4000_ao_ex_trig_disable(struct me4000_ao_context *ao_context) { u32 tmp; unsigned long flags; @@ -2617,7 +2597,7 @@ static int me4000_ao_ex_trig_disable(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_simultaneous_disable(me4000_ao_context_t * ao_context) +static int me4000_ao_simultaneous_disable(struct me4000_ao_context *ao_context) { u32 tmp; @@ -2643,7 +2623,7 @@ static int me4000_ao_simultaneous_disable(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_simultaneous_ex_trig(me4000_ao_context_t * ao_context) +static int me4000_ao_simultaneous_ex_trig(struct me4000_ao_context *ao_context) { u32 tmp; @@ -2659,7 +2639,7 @@ static int me4000_ao_simultaneous_ex_trig(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_simultaneous_sw(me4000_ao_context_t * ao_context) +static int me4000_ao_simultaneous_sw(struct me4000_ao_context *ao_context) { u32 tmp; @@ -2675,13 +2655,13 @@ static int me4000_ao_simultaneous_sw(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_preload(me4000_ao_context_t * ao_context) +static int me4000_ao_preload(struct me4000_ao_context *ao_context) { CALL_PDEBUG("me4000_ao_preload() is executed\n"); return me4000_ao_simultaneous_sw(ao_context); } -static int me4000_ao_preload_update(me4000_ao_context_t * ao_context) +static int me4000_ao_preload_update(struct me4000_ao_context *ao_context) { u32 tmp; u32 ctrl; @@ -2705,10 +2685,12 @@ static int me4000_ao_preload_update(me4000_ao_context_t * ao_context) if (! (tmp & (0x1 << - (((me4000_ao_context_t *) entry)->index + 16)))) { + (((struct me4000_ao_context *)entry)->index + + 16)))) { tmp &= ~(0x1 << - (((me4000_ao_context_t *) entry)->index)); + (((struct me4000_ao_context *)entry)-> + index)); } } } @@ -2718,18 +2700,19 @@ static int me4000_ao_preload_update(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_simultaneous_update(me4000_ao_channel_list_t * arg, - me4000_ao_context_t * ao_context) +static int me4000_ao_simultaneous_update(struct me4000_ao_channel_list *arg, + struct me4000_ao_context *ao_context) { int err; int i; u32 tmp; - me4000_ao_channel_list_t channels; + struct me4000_ao_channel_list channels; CALL_PDEBUG("me4000_ao_simultaneous_update() is executed\n"); /* Copy data from user */ - err = copy_from_user(&channels, arg, sizeof(me4000_ao_channel_list_t)); + err = copy_from_user(&channels, arg, + sizeof(struct me4000_ao_channel_list)); if (err) { printk(KERN_ERR "ME4000:me4000_ao_simultaneous_update():Can't copy command\n"); @@ -2737,13 +2720,12 @@ static int me4000_ao_simultaneous_update(me4000_ao_channel_list_t * arg, } channels.list = - kmalloc(sizeof(unsigned long) * channels.count, GFP_KERNEL); + kzalloc(sizeof(unsigned long) * channels.count, GFP_KERNEL); if (!channels.list) { printk(KERN_ERR "ME4000:me4000_ao_simultaneous_update():Can't get buffer\n"); return -ENOMEM; } - memset(channels.list, 0, sizeof(unsigned long) * channels.count); /* Copy channel list from user */ err = @@ -2777,7 +2759,7 @@ static int me4000_ao_simultaneous_update(me4000_ao_channel_list_t * arg, return 0; } -static int me4000_ao_synchronous_ex_trig(me4000_ao_context_t * ao_context) +static int me4000_ao_synchronous_ex_trig(struct me4000_ao_context *ao_context) { u32 tmp; unsigned long flags; @@ -2813,7 +2795,7 @@ static int me4000_ao_synchronous_ex_trig(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_synchronous_sw(me4000_ao_context_t * ao_context) +static int me4000_ao_synchronous_sw(struct me4000_ao_context *ao_context) { u32 tmp; unsigned long flags; @@ -2848,13 +2830,13 @@ static int me4000_ao_synchronous_sw(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_synchronous_disable(me4000_ao_context_t * ao_context) +static int me4000_ao_synchronous_disable(struct me4000_ao_context *ao_context) { return me4000_ao_simultaneous_disable(ao_context); } static int me4000_ao_get_free_buffer(unsigned long *arg, - me4000_ao_context_t * ao_context) + struct me4000_ao_context *ao_context) { unsigned long c; int err; @@ -2864,7 +2846,7 @@ static int me4000_ao_get_free_buffer(unsigned long *arg, err = copy_to_user(arg, &c, sizeof(unsigned long)); if (err) { printk(KERN_ERR - "ME4000:me4000_ao_get_free_buffer():Can't copy to user space\n"); + "%s:Can't copy to user space\n", __func__); return -EFAULT; } @@ -2872,7 +2854,7 @@ static int me4000_ao_get_free_buffer(unsigned long *arg, } static int me4000_ao_ex_trig_timeout(unsigned long *arg, - me4000_ao_context_t * ao_context) + struct me4000_ao_context *ao_context) { u32 tmp; wait_queue_head_t queue; @@ -2928,7 +2910,7 @@ static int me4000_ao_ex_trig_timeout(unsigned long *arg, return 0; } -static int me4000_ao_enable_do(me4000_ao_context_t * ao_context) +static int me4000_ao_enable_do(struct me4000_ao_context *ao_context) { u32 tmp; unsigned long flags; @@ -2959,7 +2941,7 @@ static int me4000_ao_enable_do(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_disable_do(me4000_ao_context_t * ao_context) +static int me4000_ao_disable_do(struct me4000_ao_context *ao_context) { u32 tmp; unsigned long flags; @@ -2989,7 +2971,7 @@ static int me4000_ao_disable_do(me4000_ao_context_t * ao_context) return 0; } -static int me4000_ao_fsm_state(int *arg, me4000_ao_context_t * ao_context) +static int me4000_ao_fsm_state(int *arg, struct me4000_ao_context *ao_context) { unsigned long tmp; @@ -3012,9 +2994,9 @@ static int me4000_ao_fsm_state(int *arg, me4000_ao_context_t * ao_context) return 0; } -/*------------------------------- Analog input stuff --------------------------------------*/ +/*------------------------- Analog input stuff -------------------------------*/ -static int me4000_ai_prepare(me4000_ai_context_t * ai_context) +static int me4000_ai_prepare(struct me4000_ai_context *ai_context) { wait_queue_head_t queue; int err; @@ -3057,14 +3039,13 @@ static int me4000_ai_prepare(me4000_ai_context_t * ai_context) /* Allocate circular buffer */ ai_context->circ_buf.buf = - kmalloc(ME4000_AI_BUFFER_SIZE, GFP_KERNEL); + kzalloc(ME4000_AI_BUFFER_SIZE, GFP_KERNEL); if (!ai_context->circ_buf.buf) { printk(KERN_ERR "ME4000:me4000_ai_prepare():Can't get circular buffer\n"); free_irq(ai_context->irq, ai_context); return -ENOMEM; } - memset(ai_context->circ_buf.buf, 0, ME4000_AI_BUFFER_SIZE); /* Clear the circular buffer */ ai_context->circ_buf.head = 0; @@ -3074,7 +3055,7 @@ static int me4000_ai_prepare(me4000_ai_context_t * ai_context) return 0; } -static int me4000_ai_reset(me4000_ai_context_t * ai_context) +static int me4000_ai_reset(struct me4000_ai_context *ai_context) { wait_queue_head_t queue; u32 tmp; @@ -3139,7 +3120,7 @@ static int me4000_ai_reset(me4000_ai_context_t * ai_context) static int me4000_ai_ioctl_sing(struct inode *inode_p, struct file *file_p, unsigned int service, unsigned long arg) { - me4000_ai_context_t *ai_context; + struct me4000_ai_context *ai_context; CALL_PDEBUG("me4000_ai_ioctl_sing() is executed\n"); @@ -3157,16 +3138,17 @@ static int me4000_ai_ioctl_sing(struct inode *inode_p, struct file *file_p, switch (service) { case ME4000_AI_SINGLE: - return me4000_ai_single((me4000_ai_single_t *) arg, ai_context); + return me4000_ai_single((struct me4000_ai_single *)arg, + ai_context); case ME4000_AI_EX_TRIG_ENABLE: return me4000_ai_ex_trig_enable(ai_context); case ME4000_AI_EX_TRIG_DISABLE: return me4000_ai_ex_trig_disable(ai_context); case ME4000_AI_EX_TRIG_SETUP: - return me4000_ai_ex_trig_setup((me4000_ai_trigger_t *) arg, + return me4000_ai_ex_trig_setup((struct me4000_ai_trigger *)arg, ai_context); case ME4000_GET_USER_INFO: - return me4000_get_user_info((me4000_user_info_t *) arg, + return me4000_get_user_info((struct me4000_user_info *)arg, ai_context->board_info); case ME4000_AI_OFFSET_ENABLE: return me4000_ai_offset_enable(ai_context); @@ -3177,9 +3159,11 @@ static int me4000_ai_ioctl_sing(struct inode *inode_p, struct file *file_p, case ME4000_AI_FULLSCALE_DISABLE: return me4000_ai_fullscale_disable(ai_context); case ME4000_AI_EEPROM_READ: - return me4000_eeprom_read((me4000_eeprom_t *) arg, ai_context); + return me4000_eeprom_read((struct me4000_eeprom *)arg, + ai_context); case ME4000_AI_EEPROM_WRITE: - return me4000_eeprom_write((me4000_eeprom_t *) arg, ai_context); + return me4000_eeprom_write((struct me4000_eeprom *)arg, + ai_context); default: printk(KERN_ERR "me4000_ai_ioctl_sing():Invalid service number\n"); @@ -3188,10 +3172,10 @@ static int me4000_ai_ioctl_sing(struct inode *inode_p, struct file *file_p, return 0; } -static int me4000_ai_single(me4000_ai_single_t * arg, - me4000_ai_context_t * ai_context) +static int me4000_ai_single(struct me4000_ai_single *arg, + struct me4000_ai_context *ai_context) { - me4000_ai_single_t cmd; + struct me4000_ai_single cmd; int err; u32 tmp; wait_queue_head_t queue; @@ -3202,7 +3186,7 @@ static int me4000_ai_single(me4000_ai_single_t * arg, init_waitqueue_head(&queue); /* Copy data from user */ - err = copy_from_user(&cmd, arg, sizeof(me4000_ai_single_t)); + err = copy_from_user(&cmd, arg, sizeof(struct me4000_ai_single)); if (err) { printk(KERN_ERR "ME4000:me4000_ai_single():Can't copy from user space\n"); @@ -3301,7 +3285,7 @@ static int me4000_ai_single(me4000_ai_single_t * arg, cmd.value = me4000_inl(ai_context->data_reg) & 0xFFFF; /* Copy result back to user */ - err = copy_to_user(arg, &cmd, sizeof(me4000_ai_single_t)); + err = copy_to_user(arg, &cmd, sizeof(struct me4000_ai_single)); if (err) { printk(KERN_ERR "ME4000:me4000_ai_single():Can't copy to user space\n"); @@ -3314,7 +3298,7 @@ static int me4000_ai_single(me4000_ai_single_t * arg, static int me4000_ai_ioctl_sw(struct inode *inode_p, struct file *file_p, unsigned int service, unsigned long arg) { - me4000_ai_context_t *ai_context; + struct me4000_ai_context *ai_context; CALL_PDEBUG("me4000_ai_ioctl_sw() is executed\n"); @@ -3332,9 +3316,11 @@ static int me4000_ai_ioctl_sw(struct inode *inode_p, struct file *file_p, switch (service) { case ME4000_AI_SC_SETUP: - return me4000_ai_sc_setup((me4000_ai_sc_t *) arg, ai_context); + return me4000_ai_sc_setup((struct me4000_ai_sc *)arg, + ai_context); case ME4000_AI_CONFIG: - return me4000_ai_config((me4000_ai_config_t *) arg, ai_context); + return me4000_ai_config((struct me4000_ai_config *)arg, + ai_context); case ME4000_AI_START: return me4000_ai_start(ai_context); case ME4000_AI_STOP: @@ -3344,19 +3330,20 @@ static int me4000_ai_ioctl_sw(struct inode *inode_p, struct file *file_p, case ME4000_AI_FSM_STATE: return me4000_ai_fsm_state((int *)arg, ai_context); case ME4000_GET_USER_INFO: - return me4000_get_user_info((me4000_user_info_t *) arg, + return me4000_get_user_info((struct me4000_user_info *)arg, ai_context->board_info); case ME4000_AI_EEPROM_READ: - return me4000_eeprom_read((me4000_eeprom_t *) arg, ai_context); + return me4000_eeprom_read((struct me4000_eeprom *)arg, + ai_context); case ME4000_AI_EEPROM_WRITE: - return me4000_eeprom_write((me4000_eeprom_t *) arg, ai_context); + return me4000_eeprom_write((struct me4000_eeprom *)arg, + ai_context); case ME4000_AI_GET_COUNT_BUFFER: return me4000_ai_get_count_buffer((unsigned long *)arg, ai_context); default: printk(KERN_ERR - "ME4000:me4000_ai_ioctl_sw():Invalid service number %d\n", - service); + "%s:Invalid service number %d\n", __func__, service); return -ENOTTY; } return 0; @@ -3365,7 +3352,7 @@ static int me4000_ai_ioctl_sw(struct inode *inode_p, struct file *file_p, static int me4000_ai_ioctl_ext(struct inode *inode_p, struct file *file_p, unsigned int service, unsigned long arg) { - me4000_ai_context_t *ai_context; + struct me4000_ai_context *ai_context; CALL_PDEBUG("me4000_ai_ioctl_ext() is executed\n"); @@ -3383,9 +3370,11 @@ static int me4000_ai_ioctl_ext(struct inode *inode_p, struct file *file_p, switch (service) { case ME4000_AI_SC_SETUP: - return me4000_ai_sc_setup((me4000_ai_sc_t *) arg, ai_context); + return me4000_ai_sc_setup((struct me4000_ai_sc *)arg, + ai_context); case ME4000_AI_CONFIG: - return me4000_ai_config((me4000_ai_config_t *) arg, ai_context); + return me4000_ai_config((struct me4000_ai_config *)arg, + ai_context); case ME4000_AI_START: return me4000_ai_start_ex((unsigned long *)arg, ai_context); case ME4000_AI_STOP: @@ -3397,20 +3386,19 @@ static int me4000_ai_ioctl_ext(struct inode *inode_p, struct file *file_p, case ME4000_AI_EX_TRIG_DISABLE: return me4000_ai_ex_trig_disable(ai_context); case ME4000_AI_EX_TRIG_SETUP: - return me4000_ai_ex_trig_setup((me4000_ai_trigger_t *) arg, + return me4000_ai_ex_trig_setup((struct me4000_ai_trigger *)arg, ai_context); case ME4000_AI_FSM_STATE: return me4000_ai_fsm_state((int *)arg, ai_context); case ME4000_GET_USER_INFO: - return me4000_get_user_info((me4000_user_info_t *) arg, + return me4000_get_user_info((struct me4000_user_info *)arg, ai_context->board_info); case ME4000_AI_GET_COUNT_BUFFER: return me4000_ai_get_count_buffer((unsigned long *)arg, ai_context); default: printk(KERN_ERR - "ME4000:me4000_ai_ioctl_ext():Invalid service number %d\n", - service); + "%s:Invalid service number %d\n", __func__ , service); return -ENOTTY; } return 0; @@ -3418,7 +3406,7 @@ static int me4000_ai_ioctl_ext(struct inode *inode_p, struct file *file_p, static int me4000_ai_fasync(int fd, struct file *file_p, int mode) { - me4000_ai_context_t *ai_context; + struct me4000_ai_context *ai_context; CALL_PDEBUG("me4000_ao_fasync_cont() is executed\n"); @@ -3426,10 +3414,10 @@ static int me4000_ai_fasync(int fd, struct file *file_p, int mode) return fasync_helper(fd, file_p, mode, &ai_context->fasync_p); } -static int me4000_ai_config(me4000_ai_config_t * arg, - me4000_ai_context_t * ai_context) +static int me4000_ai_config(struct me4000_ai_config *arg, + struct me4000_ai_context *ai_context) { - me4000_ai_config_t cmd; + struct me4000_ai_config cmd; u32 *list = NULL; u32 mode; int i; @@ -3451,7 +3439,7 @@ static int me4000_ai_config(me4000_ai_config_t * arg, } /* Copy data from user */ - err = copy_from_user(&cmd, arg, sizeof(me4000_ai_config_t)); + err = copy_from_user(&cmd, arg, sizeof(struct me4000_ai_config)); if (err) { printk(KERN_ERR "ME4000:me4000_ai_config():Can't copy from user space\n"); @@ -3671,7 +3659,7 @@ static int me4000_ai_config(me4000_ai_config_t * arg, return 0; - AI_CONFIG_ERR: +AI_CONFIG_ERR: /* Reset the timers */ ai_context->chan_timer = 66; @@ -3699,7 +3687,7 @@ static int me4000_ai_config(me4000_ai_config_t * arg, } -static int ai_common_start(me4000_ai_context_t * ai_context) +static int ai_common_start(struct me4000_ai_context *ai_context) { u32 tmp; CALL_PDEBUG("ai_common_start() is executed\n"); @@ -3762,7 +3750,7 @@ static int ai_common_start(me4000_ai_context_t * ai_context) return 0; } -static int me4000_ai_start(me4000_ai_context_t * ai_context) +static int me4000_ai_start(struct me4000_ai_context *ai_context) { int err; CALL_PDEBUG("me4000_ai_start() is executed\n"); @@ -3779,7 +3767,7 @@ static int me4000_ai_start(me4000_ai_context_t * ai_context) } static int me4000_ai_start_ex(unsigned long *arg, - me4000_ai_context_t * ai_context) + struct me4000_ai_context *ai_context) { int err; wait_queue_head_t queue; @@ -3834,7 +3822,7 @@ static int me4000_ai_start_ex(unsigned long *arg, return 0; } -static int me4000_ai_stop(me4000_ai_context_t * ai_context) +static int me4000_ai_stop(struct me4000_ai_context *ai_context) { wait_queue_head_t queue; u32 tmp; @@ -3871,7 +3859,7 @@ static int me4000_ai_stop(me4000_ai_context_t * ai_context) return 0; } -static int me4000_ai_immediate_stop(me4000_ai_context_t * ai_context) +static int me4000_ai_immediate_stop(struct me4000_ai_context *ai_context) { wait_queue_head_t queue; u32 tmp; @@ -3908,7 +3896,7 @@ static int me4000_ai_immediate_stop(me4000_ai_context_t * ai_context) return 0; } -static int me4000_ai_ex_trig_enable(me4000_ai_context_t * ai_context) +static int me4000_ai_ex_trig_enable(struct me4000_ai_context *ai_context) { u32 tmp; unsigned long flags; @@ -3924,7 +3912,7 @@ static int me4000_ai_ex_trig_enable(me4000_ai_context_t * ai_context) return 0; } -static int me4000_ai_ex_trig_disable(me4000_ai_context_t * ai_context) +static int me4000_ai_ex_trig_disable(struct me4000_ai_context *ai_context) { u32 tmp; unsigned long flags; @@ -3940,10 +3928,10 @@ static int me4000_ai_ex_trig_disable(me4000_ai_context_t * ai_context) return 0; } -static int me4000_ai_ex_trig_setup(me4000_ai_trigger_t * arg, - me4000_ai_context_t * ai_context) +static int me4000_ai_ex_trig_setup(struct me4000_ai_trigger *arg, + struct me4000_ai_context *ai_context) { - me4000_ai_trigger_t cmd; + struct me4000_ai_trigger cmd; int err; u32 tmp; unsigned long flags; @@ -3951,7 +3939,7 @@ static int me4000_ai_ex_trig_setup(me4000_ai_trigger_t * arg, CALL_PDEBUG("me4000_ai_ex_trig_setup() is executed\n"); /* Copy data from user */ - err = copy_from_user(&cmd, arg, sizeof(me4000_ai_trigger_t)); + err = copy_from_user(&cmd, arg, sizeof(struct me4000_ai_trigger)); if (err) { printk(KERN_ERR "ME4000:me4000_ai_ex_trig_setup():Can't copy from user space\n"); @@ -4000,16 +3988,16 @@ static int me4000_ai_ex_trig_setup(me4000_ai_trigger_t * arg, return 0; } -static int me4000_ai_sc_setup(me4000_ai_sc_t * arg, - me4000_ai_context_t * ai_context) +static int me4000_ai_sc_setup(struct me4000_ai_sc *arg, + struct me4000_ai_context *ai_context) { - me4000_ai_sc_t cmd; + struct me4000_ai_sc cmd; int err; CALL_PDEBUG("me4000_ai_sc_setup() is executed\n"); /* Copy data from user */ - err = copy_from_user(&cmd, arg, sizeof(me4000_ai_sc_t)); + err = copy_from_user(&cmd, arg, sizeof(struct me4000_ai_sc)); if (err) { printk(KERN_ERR "ME4000:me4000_ai_sc_setup():Can't copy from user space\n"); @@ -4023,9 +4011,9 @@ static int me4000_ai_sc_setup(me4000_ai_sc_t * arg, } static ssize_t me4000_ai_read(struct file *filep, char *buff, size_t cnt, - loff_t * offp) + loff_t *offp) { - me4000_ai_context_t *ai_context = filep->private_data; + struct me4000_ai_context *ai_context = filep->private_data; s16 *buffer = (s16 *) buff; size_t count = cnt / 2; unsigned long flags; @@ -4150,9 +4138,9 @@ static ssize_t me4000_ai_read(struct file *filep, char *buff, size_t cnt, return ret * 2; } -static unsigned int me4000_ai_poll(struct file *file_p, poll_table * wait) +static unsigned int me4000_ai_poll(struct file *file_p, poll_table *wait) { - me4000_ai_context_t *ai_context; + struct me4000_ai_context *ai_context; unsigned long mask = 0; CALL_PDEBUG("me4000_ai_poll() is executed\n"); @@ -4171,7 +4159,7 @@ static unsigned int me4000_ai_poll(struct file *file_p, poll_table * wait) return mask; } -static int me4000_ai_offset_enable(me4000_ai_context_t * ai_context) +static int me4000_ai_offset_enable(struct me4000_ai_context *ai_context) { unsigned long tmp; @@ -4184,7 +4172,7 @@ static int me4000_ai_offset_enable(me4000_ai_context_t * ai_context) return 0; } -static int me4000_ai_offset_disable(me4000_ai_context_t * ai_context) +static int me4000_ai_offset_disable(struct me4000_ai_context *ai_context) { unsigned long tmp; @@ -4197,7 +4185,7 @@ static int me4000_ai_offset_disable(me4000_ai_context_t * ai_context) return 0; } -static int me4000_ai_fullscale_enable(me4000_ai_context_t * ai_context) +static int me4000_ai_fullscale_enable(struct me4000_ai_context *ai_context) { unsigned long tmp; @@ -4210,7 +4198,7 @@ static int me4000_ai_fullscale_enable(me4000_ai_context_t * ai_context) return 0; } -static int me4000_ai_fullscale_disable(me4000_ai_context_t * ai_context) +static int me4000_ai_fullscale_disable(struct me4000_ai_context *ai_context) { unsigned long tmp; @@ -4223,7 +4211,7 @@ static int me4000_ai_fullscale_disable(me4000_ai_context_t * ai_context) return 0; } -static int me4000_ai_fsm_state(int *arg, me4000_ai_context_t * ai_context) +static int me4000_ai_fsm_state(int *arg, struct me4000_ai_context *ai_context) { unsigned long tmp; @@ -4242,7 +4230,7 @@ static int me4000_ai_fsm_state(int *arg, me4000_ai_context_t * ai_context) } static int me4000_ai_get_count_buffer(unsigned long *arg, - me4000_ai_context_t * ai_context) + struct me4000_ai_context *ai_context) { unsigned long c; int err; @@ -4252,7 +4240,7 @@ static int me4000_ai_get_count_buffer(unsigned long *arg, err = copy_to_user(arg, &c, sizeof(unsigned long)); if (err) { printk(KERN_ERR - "ME4000:me4000_ai_get_count_buffer():Can't copy to user space\n"); + "%s:Can't copy to user space\n", __func__); return -EFAULT; } @@ -4261,7 +4249,7 @@ static int me4000_ai_get_count_buffer(unsigned long *arg, /*---------------------------------- EEPROM stuff ---------------------------*/ -static int eeprom_write_cmd(me4000_ai_context_t * ai_context, unsigned long cmd, +static int eeprom_write_cmd(struct me4000_ai_context *ai_context, unsigned long cmd, int length) { int i; @@ -4318,7 +4306,7 @@ static int eeprom_write_cmd(me4000_ai_context_t * ai_context, unsigned long cmd, return 0; } -static unsigned short eeprom_read_cmd(me4000_ai_context_t * ai_context, +static unsigned short eeprom_read_cmd(struct me4000_ai_context *ai_context, unsigned long cmd, int length) { int i; @@ -4397,11 +4385,11 @@ static unsigned short eeprom_read_cmd(me4000_ai_context_t * ai_context, return id; } -static int me4000_eeprom_write(me4000_eeprom_t * arg, - me4000_ai_context_t * ai_context) +static int me4000_eeprom_write(struct me4000_eeprom *arg, + struct me4000_ai_context *ai_context) { int err; - me4000_eeprom_t setup; + struct me4000_eeprom setup; unsigned long cmd; unsigned long date_high; unsigned long date_low; @@ -4594,12 +4582,12 @@ static int me4000_eeprom_write(me4000_eeprom_t * arg, return 0; } -static int me4000_eeprom_read(me4000_eeprom_t * arg, - me4000_ai_context_t * ai_context) +static int me4000_eeprom_read(struct me4000_eeprom *arg, + struct me4000_ai_context *ai_context) { int err; unsigned long cmd; - me4000_eeprom_t setup; + struct me4000_eeprom setup; CALL_PDEBUG("me4000_eeprom_read() is executed\n"); @@ -4687,7 +4675,7 @@ static int me4000_eeprom_read(me4000_eeprom_t * arg, static int me4000_dio_ioctl(struct inode *inode_p, struct file *file_p, unsigned int service, unsigned long arg) { - me4000_dio_context_t *dio_context; + struct me4000_dio_context *dio_context; CALL_PDEBUG("me4000_dio_ioctl() is executed\n"); @@ -4704,13 +4692,13 @@ static int me4000_dio_ioctl(struct inode *inode_p, struct file *file_p, switch (service) { case ME4000_DIO_CONFIG: - return me4000_dio_config((me4000_dio_config_t *) arg, + return me4000_dio_config((struct me4000_dio_config *)arg, dio_context); case ME4000_DIO_SET_BYTE: - return me4000_dio_set_byte((me4000_dio_byte_t *) arg, + return me4000_dio_set_byte((struct me4000_dio_byte *)arg, dio_context); case ME4000_DIO_GET_BYTE: - return me4000_dio_get_byte((me4000_dio_byte_t *) arg, + return me4000_dio_get_byte((struct me4000_dio_byte *)arg, dio_context); case ME4000_DIO_RESET: return me4000_dio_reset(dio_context); @@ -4723,17 +4711,17 @@ static int me4000_dio_ioctl(struct inode *inode_p, struct file *file_p, return 0; } -static int me4000_dio_config(me4000_dio_config_t * arg, - me4000_dio_context_t * dio_context) +static int me4000_dio_config(struct me4000_dio_config *arg, + struct me4000_dio_context *dio_context) { - me4000_dio_config_t cmd; + struct me4000_dio_config cmd; u32 tmp; int err; CALL_PDEBUG("me4000_dio_config() is executed\n"); /* Copy data from user */ - err = copy_from_user(&cmd, arg, sizeof(me4000_dio_config_t)); + err = copy_from_user(&cmd, arg, sizeof(struct me4000_dio_config)); if (err) { printk(KERN_ERR "ME4000:me4000_dio_config():Can't copy from user space\n"); @@ -4964,16 +4952,16 @@ static int me4000_dio_config(me4000_dio_config_t * arg, return 0; } -static int me4000_dio_set_byte(me4000_dio_byte_t * arg, - me4000_dio_context_t * dio_context) +static int me4000_dio_set_byte(struct me4000_dio_byte *arg, + struct me4000_dio_context *dio_context) { - me4000_dio_byte_t cmd; + struct me4000_dio_byte cmd; int err; CALL_PDEBUG("me4000_dio_set_byte() is executed\n"); /* Copy data from user */ - err = copy_from_user(&cmd, arg, sizeof(me4000_dio_byte_t)); + err = copy_from_user(&cmd, arg, sizeof(struct me4000_dio_byte)); if (err) { printk(KERN_ERR "ME4000:me4000_dio_set_byte():Can't copy from user space\n"); @@ -5030,16 +5018,16 @@ static int me4000_dio_set_byte(me4000_dio_byte_t * arg, return 0; } -static int me4000_dio_get_byte(me4000_dio_byte_t * arg, - me4000_dio_context_t * dio_context) +static int me4000_dio_get_byte(struct me4000_dio_byte *arg, + struct me4000_dio_context *dio_context) { - me4000_dio_byte_t cmd; + struct me4000_dio_byte cmd; int err; CALL_PDEBUG("me4000_dio_get_byte() is executed\n"); /* Copy data from user */ - err = copy_from_user(&cmd, arg, sizeof(me4000_dio_byte_t)); + err = copy_from_user(&cmd, arg, sizeof(struct me4000_dio_byte)); if (err) { printk(KERN_ERR "ME4000:me4000_dio_get_byte():Can't copy from user space\n"); @@ -5070,7 +5058,7 @@ static int me4000_dio_get_byte(me4000_dio_byte_t * arg, } /* Copy result back to user */ - err = copy_to_user(arg, &cmd, sizeof(me4000_dio_byte_t)); + err = copy_to_user(arg, &cmd, sizeof(struct me4000_dio_byte)); if (err) { printk(KERN_ERR "ME4000:me4000_dio_get_byte():Can't copy to user space\n"); @@ -5080,7 +5068,7 @@ static int me4000_dio_get_byte(me4000_dio_byte_t * arg, return 0; } -static int me4000_dio_reset(me4000_dio_context_t * dio_context) +static int me4000_dio_reset(struct me4000_dio_context *dio_context) { CALL_PDEBUG("me4000_dio_reset() is executed\n"); @@ -5101,7 +5089,7 @@ static int me4000_dio_reset(me4000_dio_context_t * dio_context) static int me4000_cnt_ioctl(struct inode *inode_p, struct file *file_p, unsigned int service, unsigned long arg) { - me4000_cnt_context_t *cnt_context; + struct me4000_cnt_context *cnt_context; CALL_PDEBUG("me4000_cnt_ioctl() is executed\n"); @@ -5118,11 +5106,11 @@ static int me4000_cnt_ioctl(struct inode *inode_p, struct file *file_p, switch (service) { case ME4000_CNT_READ: - return me4000_cnt_read((me4000_cnt_t *) arg, cnt_context); + return me4000_cnt_read((struct me4000_cnt *)arg, cnt_context); case ME4000_CNT_WRITE: - return me4000_cnt_write((me4000_cnt_t *) arg, cnt_context); + return me4000_cnt_write((struct me4000_cnt *)arg, cnt_context); case ME4000_CNT_CONFIG: - return me4000_cnt_config((me4000_cnt_config_t *) arg, + return me4000_cnt_config((struct me4000_cnt_config *)arg, cnt_context); case ME4000_CNT_RESET: return me4000_cnt_reset(cnt_context); @@ -5135,10 +5123,10 @@ static int me4000_cnt_ioctl(struct inode *inode_p, struct file *file_p, return 0; } -static int me4000_cnt_config(me4000_cnt_config_t * arg, - me4000_cnt_context_t * cnt_context) +static int me4000_cnt_config(struct me4000_cnt_config *arg, + struct me4000_cnt_context *cnt_context) { - me4000_cnt_config_t cmd; + struct me4000_cnt_config cmd; u8 counter; u8 mode; int err; @@ -5146,7 +5134,7 @@ static int me4000_cnt_config(me4000_cnt_config_t * arg, CALL_PDEBUG("me4000_cnt_config() is executed\n"); /* Copy data from user */ - err = copy_from_user(&cmd, arg, sizeof(me4000_cnt_config_t)); + err = copy_from_user(&cmd, arg, sizeof(struct me4000_cnt_config)); if (err) { printk(KERN_ERR "ME4000:me4000_cnt_config():Can't copy from user space\n"); @@ -5204,17 +5192,17 @@ static int me4000_cnt_config(me4000_cnt_config_t * arg, return 0; } -static int me4000_cnt_read(me4000_cnt_t * arg, - me4000_cnt_context_t * cnt_context) +static int me4000_cnt_read(struct me4000_cnt *arg, + struct me4000_cnt_context *cnt_context) { - me4000_cnt_t cmd; + struct me4000_cnt cmd; u8 tmp; int err; CALL_PDEBUG("me4000_cnt_read() is executed\n"); /* Copy data from user */ - err = copy_from_user(&cmd, arg, sizeof(me4000_cnt_t)); + err = copy_from_user(&cmd, arg, sizeof(struct me4000_cnt)); if (err) { printk(KERN_ERR "ME4000:me4000_cnt_read():Can't copy from user space\n"); @@ -5249,7 +5237,7 @@ static int me4000_cnt_read(me4000_cnt_t * arg, } /* Copy result back to user */ - err = copy_to_user(arg, &cmd, sizeof(me4000_cnt_t)); + err = copy_to_user(arg, &cmd, sizeof(struct me4000_cnt)); if (err) { printk(KERN_ERR "ME4000:me4000_cnt_read():Can't copy to user space\n"); @@ -5259,17 +5247,17 @@ static int me4000_cnt_read(me4000_cnt_t * arg, return 0; } -static int me4000_cnt_write(me4000_cnt_t * arg, - me4000_cnt_context_t * cnt_context) +static int me4000_cnt_write(struct me4000_cnt *arg, + struct me4000_cnt_context *cnt_context) { - me4000_cnt_t cmd; + struct me4000_cnt cmd; u8 tmp; int err; CALL_PDEBUG("me4000_cnt_write() is executed\n"); /* Copy data from user */ - err = copy_from_user(&cmd, arg, sizeof(me4000_cnt_t)); + err = copy_from_user(&cmd, arg, sizeof(struct me4000_cnt)); if (err) { printk(KERN_ERR "ME4000:me4000_cnt_write():Can't copy from user space\n"); @@ -5306,7 +5294,7 @@ static int me4000_cnt_write(me4000_cnt_t * arg, return 0; } -static int me4000_cnt_reset(me4000_cnt_context_t * cnt_context) +static int me4000_cnt_reset(struct me4000_cnt_context *cnt_context) { CALL_PDEBUG("me4000_cnt_reset() is executed\n"); @@ -5333,7 +5321,7 @@ static int me4000_cnt_reset(me4000_cnt_context_t * cnt_context) static int me4000_ext_int_ioctl(struct inode *inode_p, struct file *file_p, unsigned int service, unsigned long arg) { - me4000_ext_int_context_t *ext_int_context; + struct me4000_ext_int_context *ext_int_context; CALL_PDEBUG("me4000_ext_int_ioctl() is executed\n"); @@ -5366,7 +5354,7 @@ static int me4000_ext_int_ioctl(struct inode *inode_p, struct file *file_p, return 0; } -static int me4000_ext_int_enable(me4000_ext_int_context_t * ext_int_context) +static int me4000_ext_int_enable(struct me4000_ext_int_context *ext_int_context) { unsigned long tmp; @@ -5379,7 +5367,7 @@ static int me4000_ext_int_enable(me4000_ext_int_context_t * ext_int_context) return 0; } -static int me4000_ext_int_disable(me4000_ext_int_context_t * ext_int_context) +static int me4000_ext_int_disable(struct me4000_ext_int_context *ext_int_context) { unsigned long tmp; @@ -5393,7 +5381,7 @@ static int me4000_ext_int_disable(me4000_ext_int_context_t * ext_int_context) } static int me4000_ext_int_count(unsigned long *arg, - me4000_ext_int_context_t * ext_int_context) + struct me4000_ext_int_context *ext_int_context) { CALL_PDEBUG("me4000_ext_int_count() is executed\n"); @@ -5404,10 +5392,10 @@ static int me4000_ext_int_count(unsigned long *arg, /*------------------------------------ General stuff ------------------------------------*/ -static int me4000_get_user_info(me4000_user_info_t * arg, - me4000_info_t * board_info) +static int me4000_get_user_info(struct me4000_user_info *arg, + struct me4000_info *board_info) { - me4000_user_info_t user_info; + struct me4000_user_info user_info; CALL_PDEBUG("me4000_get_user_info() is executed\n"); @@ -5437,7 +5425,7 @@ static int me4000_get_user_info(me4000_user_info_t * arg, user_info.cnt_count = board_info->board_p->cnt.count; - if (copy_to_user(arg, &user_info, sizeof(me4000_user_info_t))) + if (copy_to_user(arg, &user_info, sizeof(struct me4000_user_info))) return -EFAULT; return 0; @@ -5448,7 +5436,7 @@ static int me4000_get_user_info(me4000_user_info_t * arg, static int me4000_ext_int_fasync(int fd, struct file *file_ptr, int mode) { int result = 0; - me4000_ext_int_context_t *ext_int_context; + struct me4000_ext_int_context *ext_int_context; CALL_PDEBUG("me4000_ext_int_fasync() is executed\n"); @@ -5465,7 +5453,7 @@ static irqreturn_t me4000_ao_isr(int irq, void *dev_id) { u32 tmp; u32 value; - me4000_ao_context_t *ao_context; + struct me4000_ao_context *ao_context; int i; int c = 0; int c1 = 0; @@ -5589,7 +5577,7 @@ static irqreturn_t me4000_ao_isr(int irq, void *dev_id) static irqreturn_t me4000_ai_isr(int irq, void *dev_id) { u32 tmp; - me4000_ai_context_t *ai_context; + struct me4000_ai_context *ai_context; int i; int c = 0; int c1 = 0; @@ -5933,7 +5921,7 @@ static irqreturn_t me4000_ai_isr(int irq, void *dev_id) static irqreturn_t me4000_ext_int_isr(int irq, void *dev_id) { - me4000_ext_int_context_t *ext_int_context; + struct me4000_ext_int_context *ext_int_context; unsigned long tmp; ISR_PDEBUG("me4000_ext_int_isr() is executed\n"); @@ -5969,10 +5957,10 @@ static irqreturn_t me4000_ext_int_isr(int irq, void *dev_id) return IRQ_HANDLED; } -void __exit me4000_module_exit(void) +static void __exit me4000_module_exit(void) { struct list_head *board_p; - me4000_info_t *board_info; + struct me4000_info *board_info; CALL_PDEBUG("cleanup_module() is executed\n"); @@ -5993,7 +5981,7 @@ void __exit me4000_module_exit(void) /* Reset the boards */ for (board_p = me4000_board_info_list.next; board_p != &me4000_board_info_list; board_p = board_p->next) { - board_info = list_entry(board_p, me4000_info_t, list); + board_info = list_entry(board_p, struct me4000_info, list); me4000_reset_board(board_info); } @@ -6007,7 +5995,7 @@ static int me4000_read_procmem(char *buf, char **start, off_t offset, int count, { int len = 0; int limit = count - 1000; - me4000_info_t *board_info; + struct me4000_info *board_info; struct list_head *ptr; len += sprintf(buf + len, "\nME4000 DRIVER VERSION %X.%X.%X\n\n", @@ -6019,7 +6007,7 @@ static int me4000_read_procmem(char *buf, char **start, off_t offset, int count, for (ptr = me4000_board_info_list.next; (ptr != &me4000_board_info_list) && (len < limit); ptr = ptr->next) { - board_info = list_entry(ptr, me4000_info_t, list); + board_info = list_entry(ptr, struct me4000_info, list); len += sprintf(buf + len, "Board number %d:\n", @@ -6029,14 +6017,14 @@ static int me4000_read_procmem(char *buf, char **start, off_t offset, int count, sprintf(buf + len, "PLX base register = 0x%lX\n", board_info->plx_regbase); len += - sprintf(buf + len, "PLX base register size = 0x%lX\n", - board_info->plx_regbase_size); + sprintf(buf + len, "PLX base register size = 0x%X\n", + (unsigned int)board_info->plx_regbase_size); len += - sprintf(buf + len, "ME4000 base register = 0x%lX\n", - board_info->me4000_regbase); + sprintf(buf + len, "ME4000 base register = 0x%X\n", + (unsigned int)board_info->me4000_regbase); len += - sprintf(buf + len, "ME4000 base register size = 0x%lX\n", - board_info->me4000_regbase_size); + sprintf(buf + len, "ME4000 base register size = 0x%X\n", + (unsigned int)board_info->me4000_regbase_size); len += sprintf(buf + len, "Serial number = 0x%X\n", board_info->serial_no); diff --git a/drivers/staging/me4000/me4000.h b/drivers/staging/me4000/me4000.h index c35e4b9793a0..81c6f4d5e25c 100644 --- a/drivers/staging/me4000/me4000.h +++ b/drivers/staging/me4000/me4000.h @@ -329,46 +329,46 @@ Circular buffer used for analog input/output reads/writes. ===========================================================================*/ -typedef struct me4000_circ_buf { +struct me4000_circ_buf { s16 *buf; int volatile head; int volatile tail; -} me4000_circ_buf_t; +}; /*============================================================================= Information about the hardware capabilities ===========================================================================*/ -typedef struct me4000_ao_info { +struct me4000_ao_info { int count; int fifo_count; -} me4000_ao_info_t; +}; -typedef struct me4000_ai_info { +struct me4000_ai_info { int count; int sh_count; int diff_count; int ex_trig_analog; -} me4000_ai_info_t; +}; -typedef struct me4000_dio_info { +struct me4000_dio_info { int count; -} me4000_dio_info_t; +}; -typedef struct me4000_cnt_info { +struct me4000_cnt_info { int count; -} me4000_cnt_info_t; +}; -typedef struct me4000_board { +struct me4000_board { u16 vendor_id; u16 device_id; - me4000_ao_info_t ao; - me4000_ai_info_t ai; - me4000_dio_info_t dio; - me4000_cnt_info_t cnt; -} me4000_board_t; + struct me4000_ao_info ao; + struct me4000_ai_info ai; + struct me4000_dio_info dio; + struct me4000_cnt_info cnt; +}; -static me4000_board_t me4000_boards[] = { +static struct me4000_board me4000_boards[] = { {PCI_VENDOR_ID_MEILHAUS, 0x4610, {0, 0}, {16, 0, 0, 0}, {4}, {3}}, {PCI_VENDOR_ID_MEILHAUS, 0x4650, {0, 0}, {16, 0, 0, 0}, {4}, {0}}, @@ -391,8 +391,6 @@ static me4000_board_t me4000_boards[] = { {0}, }; -#define ME4000_BOARD_VERSIONS (sizeof(me4000_boards) / sizeof(me4000_board_t) - 1) - /*============================================================================= PCI device table. This is used by modprobe to translate PCI IDs to drivers. @@ -427,19 +425,19 @@ MODULE_DEVICE_TABLE(pci, me4000_pci_table); Global board and subdevice information structures ===========================================================================*/ -typedef struct me4000_info { +struct me4000_info { struct list_head list; // List of all detected boards int board_count; // Index of the board after detection unsigned long plx_regbase; // PLX configuration space base address - unsigned long me4000_regbase; // Base address of the ME4000 - unsigned long timer_regbase; // Base address of the timer circuit - unsigned long program_regbase; // Base address to set the program pin for the xilinx + resource_size_t me4000_regbase; // Base address of the ME4000 + resource_size_t timer_regbase; // Base address of the timer circuit + resource_size_t program_regbase; // Base address to set the program pin for the xilinx unsigned long plx_regbase_size; // PLX register set space - unsigned long me4000_regbase_size; // ME4000 register set space - unsigned long timer_regbase_size; // Timer circuit register set space - unsigned long program_regbase_size; // Size of program base address of the ME4000 + resource_size_t me4000_regbase_size; // ME4000 register set space + resource_size_t timer_regbase_size; // Timer circuit register set space + resource_size_t program_regbase_size; // Size of program base address of the ME4000 unsigned int serial_no; // Serial number of the board unsigned char hw_revision; // Hardware revision of the board @@ -451,7 +449,7 @@ typedef struct me4000_info { int pci_func_no; // PCI function number struct pci_dev *pci_dev_p; // General PCI information - me4000_board_t *board_p; // Holds the board capabilities + struct me4000_board *board_p; // Holds the board capabilities unsigned int irq; // IRQ assigned from the PCI BIOS unsigned int irq_count; // Count of external interrupts @@ -464,18 +462,18 @@ typedef struct me4000_info { struct me4000_dio_context *dio_context; // Digital I/O specific context struct me4000_cnt_context *cnt_context; // Counter specific context struct me4000_ext_int_context *ext_int_context; // External interrupt specific context -} me4000_info_t; +}; -typedef struct me4000_ao_context { +struct me4000_ao_context { struct list_head list; // linked list of me4000_ao_context_t int index; // Index in the list int mode; // Indicates mode (0 = single, 1 = wraparound, 2 = continous) int dac_in_use; // Indicates if already opend spinlock_t use_lock; // Guards in_use spinlock_t int_lock; // Used when locking out interrupts - me4000_circ_buf_t circ_buf; // Circular buffer + struct me4000_circ_buf circ_buf; // Circular buffer wait_queue_head_t wait_queue; // Wait queue to sleep while blocking write - me4000_info_t *board_info; + struct me4000_info *board_info; unsigned int irq; // The irq associated with this ADC int volatile pipe_flag; // Indicates broken pipe set from me4000_ao_isr() unsigned long ctrl_reg; @@ -486,9 +484,9 @@ typedef struct me4000_ao_context { unsigned long irq_status_reg; unsigned long preload_reg; struct fasync_struct *fasync_p; // Queue for asynchronous notification -} me4000_ao_context_t; +}; -typedef struct me4000_ai_context { +struct me4000_ai_context { struct list_head list; // linked list of me4000_ai_info_t int mode; // Indicates mode int in_use; // Indicates if already opend @@ -496,9 +494,9 @@ typedef struct me4000_ai_context { spinlock_t int_lock; // Used when locking out interrupts int number; // Number of the DAC unsigned int irq; // The irq associated with this ADC - me4000_circ_buf_t circ_buf; // Circular buffer + struct me4000_circ_buf circ_buf; // Circular buffer wait_queue_head_t wait_queue; // Wait queue to sleep while blocking read - me4000_info_t *board_info; + struct me4000_info *board_info; struct fasync_struct *fasync_p; // Queue for asynchronous notification @@ -523,48 +521,48 @@ typedef struct me4000_ai_context { unsigned long channel_list_count; unsigned long sample_counter; int sample_counter_reload; -} me4000_ai_context_t; +}; -typedef struct me4000_dio_context { +struct me4000_dio_context { struct list_head list; // linked list of me4000_dio_context_t int in_use; // Indicates if already opend spinlock_t use_lock; // Guards in_use int number; int dio_count; - me4000_info_t *board_info; + struct me4000_info *board_info; unsigned long dir_reg; unsigned long ctrl_reg; unsigned long port_0_reg; unsigned long port_1_reg; unsigned long port_2_reg; unsigned long port_3_reg; -} me4000_dio_context_t; +}; -typedef struct me4000_cnt_context { +struct me4000_cnt_context { struct list_head list; // linked list of me4000_dio_context_t int in_use; // Indicates if already opend spinlock_t use_lock; // Guards in_use int number; int cnt_count; - me4000_info_t *board_info; + struct me4000_info *board_info; unsigned long ctrl_reg; unsigned long counter_0_reg; unsigned long counter_1_reg; unsigned long counter_2_reg; -} me4000_cnt_context_t; +}; -typedef struct me4000_ext_int_context { +struct me4000_ext_int_context { struct list_head list; // linked list of me4000_dio_context_t int in_use; // Indicates if already opend spinlock_t use_lock; // Guards in_use int number; - me4000_info_t *board_info; + struct me4000_info *board_info; unsigned int irq; unsigned long int_count; struct fasync_struct *fasync_ptr; unsigned long ctrl_reg; unsigned long irq_status_reg; -} me4000_ext_int_context_t; +}; #endif @@ -745,12 +743,12 @@ typedef struct me4000_ext_int_context { General type definitions ----------------------------------------------------------------------------*/ -typedef struct me4000_user_info { +struct me4000_user_info { int board_count; // Index of the board after detection unsigned long plx_regbase; // PLX configuration space base address - unsigned long me4000_regbase; // Base address of the ME4000 + resource_size_t me4000_regbase; // Base address of the ME4000 unsigned long plx_regbase_size; // PLX register set space - unsigned long me4000_regbase_size; // ME4000 register set space + resource_size_t me4000_regbase_size; // ME4000 register set space unsigned long serial_no; // Serial number of the board unsigned char hw_revision; // Hardware revision of the board unsigned short vendor_id; // Meilhaus vendor id (0x1402) @@ -773,62 +771,62 @@ typedef struct me4000_user_info { int dio_count; // Count of digital I/O ports int cnt_count; // Count of counters -} me4000_user_info_t; +}; /*----------------------------------------------------------------------------- Type definitions for analog output ----------------------------------------------------------------------------*/ -typedef struct me4000_ao_channel_list { +struct me4000_ao_channel_list { unsigned long count; unsigned long *list; -} me4000_ao_channel_list_t; +}; /*----------------------------------------------------------------------------- Type definitions for analog input ----------------------------------------------------------------------------*/ -typedef struct me4000_ai_channel_list { +struct me4000_ai_channel_list { unsigned long count; unsigned long *list; -} me4000_ai_channel_list_t; +}; -typedef struct me4000_ai_timer { +struct me4000_ai_timer { unsigned long pre_chan; unsigned long chan; unsigned long scan_low; unsigned long scan_high; -} me4000_ai_timer_t; +}; -typedef struct me4000_ai_config { - me4000_ai_timer_t timer; - me4000_ai_channel_list_t channel_list; +struct me4000_ai_config { + struct me4000_ai_timer timer; + struct me4000_ai_channel_list channel_list; int sh; -} me4000_ai_config_t; +}; -typedef struct me4000_ai_single { +struct me4000_ai_single { int channel; int range; int mode; short value; unsigned long timeout; -} me4000_ai_single_t; +}; -typedef struct me4000_ai_trigger { +struct me4000_ai_trigger { int mode; int edge; -} me4000_ai_trigger_t; +}; -typedef struct me4000_ai_sc { +struct me4000_ai_sc { unsigned long value; int reload; -} me4000_ai_sc_t; +}; /*----------------------------------------------------------------------------- Type definitions for eeprom ----------------------------------------------------------------------------*/ -typedef struct me4000_eeprom { +struct me4000_eeprom { unsigned long date; short uni_10_offset; short uni_10_fullscale; @@ -842,45 +840,45 @@ typedef struct me4000_eeprom { short diff_10_fullscale; short diff_2_5_offset; short diff_2_5_fullscale; -} me4000_eeprom_t; +}; /*----------------------------------------------------------------------------- Type definitions for digital I/O ----------------------------------------------------------------------------*/ -typedef struct me4000_dio_config { +struct me4000_dio_config { int port; int mode; int function; -} me4000_dio_config_t; +}; -typedef struct me4000_dio_byte { +struct me4000_dio_byte { int port; unsigned char byte; -} me4000_dio_byte_t; +}; /*----------------------------------------------------------------------------- Type definitions for counters ----------------------------------------------------------------------------*/ -typedef struct me4000_cnt { +struct me4000_cnt { int counter; unsigned short value; -} me4000_cnt_t; +}; -typedef struct me4000_cnt_config { +struct me4000_cnt_config { int counter; int mode; -} me4000_cnt_config_t; +}; /*----------------------------------------------------------------------------- Type definitions for external interrupt ----------------------------------------------------------------------------*/ -typedef struct { +struct me4000_int { int int1_count; int int2_count; -} me4000_int_type; +}; /*----------------------------------------------------------------------------- The ioctls of the board @@ -888,7 +886,8 @@ typedef struct { #define ME4000_IOCTL_MAXNR 50 #define ME4000_MAGIC 'y' -#define ME4000_GET_USER_INFO _IOR (ME4000_MAGIC, 0, me4000_user_info_t) +#define ME4000_GET_USER_INFO _IOR (ME4000_MAGIC, 0, \ + struct me4000_user_info) #define ME4000_AO_START _IOW (ME4000_MAGIC, 1, unsigned long) #define ME4000_AO_STOP _IO (ME4000_MAGIC, 2) @@ -904,25 +903,35 @@ typedef struct { #define ME4000_AO_DISABLE_DO _IO (ME4000_MAGIC, 12) #define ME4000_AO_FSM_STATE _IOR (ME4000_MAGIC, 13, int) -#define ME4000_AI_SINGLE _IOR (ME4000_MAGIC, 14, me4000_ai_single_t) +#define ME4000_AI_SINGLE _IOR (ME4000_MAGIC, 14, \ + struct me4000_ai_single) #define ME4000_AI_START _IOW (ME4000_MAGIC, 15, unsigned long) #define ME4000_AI_STOP _IO (ME4000_MAGIC, 16) #define ME4000_AI_IMMEDIATE_STOP _IO (ME4000_MAGIC, 17) #define ME4000_AI_EX_TRIG_ENABLE _IO (ME4000_MAGIC, 18) #define ME4000_AI_EX_TRIG_DISABLE _IO (ME4000_MAGIC, 19) -#define ME4000_AI_EX_TRIG_SETUP _IOW (ME4000_MAGIC, 20, me4000_ai_trigger_t) -#define ME4000_AI_CONFIG _IOW (ME4000_MAGIC, 21, me4000_ai_config_t) -#define ME4000_AI_SC_SETUP _IOW (ME4000_MAGIC, 22, me4000_ai_sc_t) +#define ME4000_AI_EX_TRIG_SETUP _IOW (ME4000_MAGIC, 20, \ + struct me4000_ai_trigger) +#define ME4000_AI_CONFIG _IOW (ME4000_MAGIC, 21, \ + struct me4000_ai_config) +#define ME4000_AI_SC_SETUP _IOW (ME4000_MAGIC, 22, \ + struct me4000_ai_sc) #define ME4000_AI_FSM_STATE _IOR (ME4000_MAGIC, 23, int) -#define ME4000_DIO_CONFIG _IOW (ME4000_MAGIC, 24, me4000_dio_config_t) -#define ME4000_DIO_GET_BYTE _IOR (ME4000_MAGIC, 25, me4000_dio_byte_t) -#define ME4000_DIO_SET_BYTE _IOW (ME4000_MAGIC, 26, me4000_dio_byte_t) +#define ME4000_DIO_CONFIG _IOW (ME4000_MAGIC, 24, \ + struct me4000_dio_config) +#define ME4000_DIO_GET_BYTE _IOR (ME4000_MAGIC, 25, \ + struct me4000_dio_byte) +#define ME4000_DIO_SET_BYTE _IOW (ME4000_MAGIC, 26, \ + struct me4000_dio_byte) #define ME4000_DIO_RESET _IO (ME4000_MAGIC, 27) -#define ME4000_CNT_READ _IOR (ME4000_MAGIC, 28, me4000_cnt_t) -#define ME4000_CNT_WRITE _IOW (ME4000_MAGIC, 29, me4000_cnt_t) -#define ME4000_CNT_CONFIG _IOW (ME4000_MAGIC, 30, me4000_cnt_config_t) +#define ME4000_CNT_READ _IOR (ME4000_MAGIC, 28, \ + struct me4000_cnt) +#define ME4000_CNT_WRITE _IOW (ME4000_MAGIC, 29, \ + struct me4000_cnt) +#define ME4000_CNT_CONFIG _IOW (ME4000_MAGIC, 30, \ + struct me4000_cnt_config) #define ME4000_CNT_RESET _IO (ME4000_MAGIC, 31) #define ME4000_EXT_INT_DISABLE _IO (ME4000_MAGIC, 32) @@ -934,13 +943,16 @@ typedef struct { #define ME4000_AI_FULLSCALE_ENABLE _IO (ME4000_MAGIC, 37) #define ME4000_AI_FULLSCALE_DISABLE _IO (ME4000_MAGIC, 38) -#define ME4000_AI_EEPROM_READ _IOR (ME4000_MAGIC, 39, me4000_eeprom_t) -#define ME4000_AI_EEPROM_WRITE _IOW (ME4000_MAGIC, 40, me4000_eeprom_t) +#define ME4000_AI_EEPROM_READ _IOR (ME4000_MAGIC, 39, \ + struct me4000_eeprom) +#define ME4000_AI_EEPROM_WRITE _IOW (ME4000_MAGIC, 40, \ + struct me4000_eeprom) #define ME4000_AO_SIMULTANEOUS_EX_TRIG _IO (ME4000_MAGIC, 41) #define ME4000_AO_SIMULTANEOUS_SW _IO (ME4000_MAGIC, 42) #define ME4000_AO_SIMULTANEOUS_DISABLE _IO (ME4000_MAGIC, 43) -#define ME4000_AO_SIMULTANEOUS_UPDATE _IOW (ME4000_MAGIC, 44, me4000_ao_channel_list_t) +#define ME4000_AO_SIMULTANEOUS_UPDATE _IOW (ME4000_MAGIC, 44, \ + struct me4000_ao_channel_list) #define ME4000_AO_SYNCHRONOUS_EX_TRIG _IO (ME4000_MAGIC, 45) #define ME4000_AO_SYNCHRONOUS_SW _IO (ME4000_MAGIC, 46) diff --git a/drivers/staging/pcc-acpi/Kconfig b/drivers/staging/pcc-acpi/Kconfig new file mode 100644 index 000000000000..6720d4086baf --- /dev/null +++ b/drivers/staging/pcc-acpi/Kconfig @@ -0,0 +1,11 @@ +config PCC_ACPI + tristate "Panasonic ACPI Hotkey support" + depends on ACPI + default n + ---help--- + This driver provides support for Panasonic hotkeys through the + ACPI interface. This works for the Panasonic R1 (N variant), + R2, R3, T2, W2, and Y2 laptops. + + To compile this driver as a module, choose M here. The module + will be called pcc-acpi. diff --git a/drivers/staging/pcc-acpi/Makefile b/drivers/staging/pcc-acpi/Makefile new file mode 100644 index 000000000000..f93b29edf61e --- /dev/null +++ b/drivers/staging/pcc-acpi/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_PCC_ACPI) += pcc-acpi.o diff --git a/drivers/staging/pcc-acpi/TODO b/drivers/staging/pcc-acpi/TODO new file mode 100644 index 000000000000..fab240982286 --- /dev/null +++ b/drivers/staging/pcc-acpi/TODO @@ -0,0 +1,7 @@ +TODO: + - Lindent fixes + - checkpatch.pl fixes + - verify that the acpi interface is correct + - remove /proc dependancy if needed (not sure yet.) + +Please send any patches for this driver to Greg Kroah-Hartman <greg@kroah.com> diff --git a/drivers/staging/pcc-acpi/pcc-acpi.c b/drivers/staging/pcc-acpi/pcc-acpi.c new file mode 100644 index 000000000000..7715c31f2731 --- /dev/null +++ b/drivers/staging/pcc-acpi/pcc-acpi.c @@ -0,0 +1,1111 @@ +/* + * Panasonic HotKey and lcd brightness control Extra driver + * (C) 2004 Hiroshi Miura <miura@da-cha.org> + * (C) 2004 NTT DATA Intellilink Co. http://www.intellilink.co.jp/ + * (C) YOKOTA Hiroshi <yokota (at) netlab. is. tsukuba. ac. jp> + * (C) 2004 David Bronaugh <dbronaugh> + * + * derived from toshiba_acpi.c, Copyright (C) 2002-2004 John Belmonte + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publicshed by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + *--------------------------------------------------------------------------- + * + * ChangeLog: + * + * Nov.04, 2006 Hiroshi Miura <miura@da-cha.org> + * -v0.9 remove warning about section reference. + * remove acpi_os_free + * add /proc/acpi/pcc/brightness interface to + * allow HAL to access. + * merge dbronaugh's enhancement + * Aug.17, 2004 David Bronaugh (dbronaugh) + * - Added screen brightness setting interface + * Thanks to the FreeBSD crew + * (acpi_panasonic.c authors) + * for the ideas I needed to accomplish it + * + * May.29, 2006 Hiroshi Miura <miura@da-cha.org> + * -v0.8.4 follow to change keyinput structure + * thanks Fabian Yamaguchi <fabs@cs.tu-berlin.de>, + * Jacob Bower <jacob.bower@ic.ac.uk> and + * Hiroshi Yokota for providing solutions. + * + * Oct.02, 2004 Hiroshi Miura <miura@da-cha.org> + * -v0.8.2 merge code of YOKOTA Hiroshi + * <yokota@netlab.is.tsukuba.ac.jp>. + * Add sticky key mode interface. + * Refactoring acpi_pcc_generete_keyinput(). + * + * Sep.15, 2004 Hiroshi Miura <miura@da-cha.org> + * -v0.8 Generate key input event on input subsystem. + * This is based on yet another driver + * written by Ryuta Nakanishi. + * + * Sep.10, 2004 Hiroshi Miura <miura@da-cha.org> + * -v0.7 Change proc interface functions using seq_file + * facility as same as other ACPI drivers. + * + * Aug.28, 2004 Hiroshi Miura <miura@da-cha.org> + * -v0.6.4 Fix a silly error with status checking + * + * Aug.25, 2004 Hiroshi Miura <miura@da-cha.org> + * -v0.6.3 replace read_acpi_int by standard + * function acpi_evaluate_integer + * some clean up and make smart copyright notice. + * fix return value of pcc_acpi_get_key() + * fix checking return value of acpi_bus_register_driver() + * + * Aug.22, 2004 David Bronaugh <dbronaugh@linuxboxen.org> + * -v0.6.2 Add check on ACPI data (num_sifr) + * Coding style cleanups, better error messages/handling + * Fixed an off-by-one error in memory allocation + * + * Aug.21, 2004 David Bronaugh <dbronaugh@linuxboxen.org> + * -v0.6.1 Fix a silly error with status checking + * + * Aug.20, 2004 David Bronaugh <dbronaugh@linuxboxen.org> + * - v0.6 Correct brightness controls to reflect reality + * based on information gleaned by Hiroshi Miura + * and discussions with Hiroshi Miura + * + * Aug.10, 2004 Hiroshi Miura <miura@da-cha.org> + * - v0.5 support LCD brightness control + * based on the disclosed information by MEI. + * + * Jul.25, 2004 Hiroshi Miura <miura@da-cha.org> + * - v0.4 first post version + * add function to retrive SIFR + * + * Jul.24, 2004 Hiroshi Miura <miura@da-cha.org> + * - v0.3 get proper status of hotkey + * + * Jul.22, 2004 Hiroshi Miura <miura@da-cha.org> + * - v0.2 add HotKey handler + * + * Jul.17, 2004 Hiroshi Miura <miura@da-cha.org> + * - v0.1 start from toshiba_acpi driver written by John Belmonte + * + */ + +#define ACPI_PCC_VERSION "0.9+hy" + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/types.h> +#include <linux/ctype.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/proc_fs.h> +#include <linux/seq_file.h> +#include <linux/slab.h> +#include <linux/uaccess.h> +#include <acpi/acpi_bus.h> +#include <acpi/acpi_drivers.h> + + +/************************************************************************* + * "seq" file template definition. + */ +/* "seq" initializer */ +#define SEQ_OPEN_FS(_open_func_name_, _show_func_name_) \ +static int _open_func_name_(struct inode *inode, struct file *file) \ +{ \ + return single_open(file, _show_func_name_, PDE(inode)->data); \ +} + +/*------------------------------------------------------------------------- + * "seq" fops template for read-only files. + */ +#define SEQ_FILEOPS_R(_open_func_name_) \ +{ \ + .open = _open_func_name_, \ + .read = seq_read, \ + .llseek = seq_lseek, \ + .release = single_release, \ +} + +/*------------------------------------------------------------------------ + * "seq" fops template for read-write files. + */ +#define SEQ_FILEOPS_RW(_open_func_name_, _write_func_name_) \ +{ \ + .open = _open_func_name_ , \ + .read = seq_read, \ + .write = _write_func_name_, \ + .llseek = seq_lseek, \ + .release = single_release, \ +} + +/* + * "seq" file template definition ended. + *************************************************************************** + */ +#ifndef ACPI_HOTKEY_COMPONENT +#define ACPI_HOTKEY_COMPONENT 0x10000000 +#endif + +#define _COMPONENT ACPI_HOTKEY_COMPONENT +ACPI_MODULE_NAME("pcc_acpi"); + +MODULE_AUTHOR("Hiroshi Miura, Hiroshi Yokota"); +MODULE_DESCRIPTION("ACPI HotKey driver for Panasonic Let's Note laptops"); +MODULE_LICENSE("GPL"); + +#define LOGPREFIX "pcc_acpi: " + +/**************************************************** + * Define ACPI PATHs + ****************************************************/ +/* Lets note hotkeys */ +#define METHOD_HKEY_QUERY "HINF" +#define METHOD_HKEY_SQTY "SQTY" +#define METHOD_HKEY_SINF "SINF" +#define METHOD_HKEY_SSET "SSET" +#define HKEY_NOTIFY 0x80 + +/* for brightness control */ +#define LCD_MAX_BRIGHTNESS 255 +/* This may be magical -- beware */ +#define LCD_BRIGHTNESS_INCREMENT 17 +/* Registers of SINF */ +#define SINF_LCD_BRIGHTNESS 4 + +/******************************************************************* + * + * definitions for /proc/ interface + * + *******************************************************************/ +#define ACPI_PCC_DRIVER_NAME "pcc_acpi" +#define ACPI_PCC_DEVICE_NAME "PCCExtra" +#define ACPI_PCC_CLASS "pcc" +#define PROC_PCC ACPI_PCC_CLASS + +#define ACPI_PCC_INPUT_PHYS "panasonic/hkey0" + +/* This is transitional definition */ +#ifndef KEY_BATT +# define KEY_BATT 227 +#endif + +#define PROC_STR_MAX_LEN 8 + +#define BUS_PCC_HOTKEY BUS_I8042 /*0x1a*/ /* FIXME: BUS_I8042? */ + +/* Fn+F4/F5 confricts with Shift+F1/F2 */ +/* This hack avoids key number confrict */ +#define PCC_KEYINPUT_MODE (0) + +/* LCD_TYPEs: 0 = Normal, 1 = Semi-transparent + ENV_STATEs: Normal temp=0x01, High temp=0x81, N/A=0x00 +*/ +enum SINF_BITS { SINF_NUM_BATTERIES = 0, + SINF_LCD_TYPE, + SINF_AC_MAX_BRIGHT, + SINF_AC_MIN_BRIGHT, + SINF_AC_CUR_BRIGHT, + /* 4 = R1 only handle SINF_AC_CUR_BRIGHT + * as SINF_CUR_BRIGHT and don't know AC state */ + SINF_DC_MAX_BRIGHT, + SINF_DC_MIN_BRIGHT, + SINF_DC_CUR_BRIGHT, + SINF_MUTE, + SINF_RESERVED, + SINF_ENV_STATE, /* 10 */ + SINF_STICKY_KEY = 0x80, +}; + +static struct acpi_device_id pcc_device_ids[] = { + {"MAT0012", 0}, + {"MAT0013", 0}, + {"MAT0018", 0}, + {"MAT0019", 0}, + {"", 0}, +}; +MODULE_DEVICE_TABLE(acpi, pcc_device_ids); + + +static int __devinit acpi_pcc_hotkey_add(struct acpi_device *device); +static int __devexit acpi_pcc_hotkey_remove(struct acpi_device *device, + int type); +static int acpi_pcc_hotkey_resume(struct acpi_device *device); + + +static struct acpi_driver acpi_pcc_driver = { + .name = ACPI_PCC_DRIVER_NAME, + .class = ACPI_PCC_CLASS, + .ids = pcc_device_ids, + .ops = { + .add = acpi_pcc_hotkey_add, + .remove = __devexit_p(acpi_pcc_hotkey_remove), +#ifdef CONFIG_PM + /*.suspend = acpi_pcc_hotkey_suspend,*/ + .resume = acpi_pcc_hotkey_resume, +#endif + }, +}; + +struct acpi_hotkey { + acpi_handle handle; + struct acpi_device *device; + struct proc_dir_entry *proc_dir_entry; + unsigned long num_sifr; + unsigned long status; + struct input_dev *input_dev; + int sticky_mode; +}; + +struct pcc_keyinput { + struct acpi_hotkey *hotkey; + int key_mode; +}; + +/* ************************************************************************* + Hotkey driver core + ************************************************************************* */ +/* ------------------------------------------------------------------------- + method access functions + ------------------------------------------------------------------------- */ +static int acpi_pcc_write_sset(struct acpi_hotkey *hotkey, int func, int val) +{ + union acpi_object in_objs[] = { + { .integer.type = ACPI_TYPE_INTEGER, + .integer.value = func, }, + { .integer.type = ACPI_TYPE_INTEGER, + .integer.value = val, }, + }; + struct acpi_object_list params = { + .count = ARRAY_SIZE(in_objs), + .pointer = in_objs, + }; + acpi_status status; + + ACPI_FUNCTION_TRACE("acpi_pcc_write_sset"); + + status = acpi_evaluate_object(hotkey->handle, METHOD_HKEY_SSET, + ¶ms, NULL); + + return_VALUE(status == AE_OK ? AE_OK : AE_ERROR); +} + +static inline int acpi_pcc_get_sqty(struct acpi_device *device) +{ + unsigned long s; + acpi_status status; + + ACPI_FUNCTION_TRACE("acpi_pcc_get_sqty"); + + status = acpi_evaluate_integer(device->handle, METHOD_HKEY_SQTY, + NULL, &s); + if (ACPI_SUCCESS(status)) { + return_VALUE(s); + } else { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "evaluation error HKEY.SQTY\n")); + return_VALUE(-EINVAL); + } +} + +static int acpi_pcc_retrieve_biosdata(struct acpi_hotkey *hotkey, u32 *sinf) +{ + acpi_status status; + struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL}; + union acpi_object *hkey = NULL; + int i; + + ACPI_FUNCTION_TRACE("acpi_pcc_retrieve_biosdata"); + + status = acpi_evaluate_object(hotkey->handle, METHOD_HKEY_SINF, 0, + &buffer); + if (ACPI_FAILURE(status)) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "evaluation error HKEY.SINF\n")); + status = AE_ERROR; + return_VALUE(status); + } + + hkey = buffer.pointer; + if (!hkey || (hkey->type != ACPI_TYPE_PACKAGE)) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Invalid HKEY.SINF\n")); + goto free_buffer; + } + + if (hotkey->num_sifr < hkey->package.count) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "SQTY reports bad SINF length\n")); + status = AE_ERROR; + goto free_buffer; + } + + for (i = 0; i < hkey->package.count; i++) { + union acpi_object *element = &(hkey->package.elements[i]); + if (likely(element->type == ACPI_TYPE_INTEGER)) { + sinf[i] = element->integer.value; + } else { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Invalid HKEY.SINF data\n")); + status = AE_ERROR; + break; + } + } + sinf[hkey->package.count] = -1; + + free_buffer: + kfree(buffer.pointer); + return_VALUE(status == AE_OK ? AE_OK : AE_ERROR); +} + +static int acpi_pcc_read_sinf_field(struct seq_file *seq, int field) +{ + struct acpi_hotkey *hotkey = (struct acpi_hotkey *) seq->private; + u32 sinf[hotkey->num_sifr + 1]; + + ACPI_FUNCTION_TRACE("acpi_pcc_read_sinf_field"); + + if (ACPI_SUCCESS(acpi_pcc_retrieve_biosdata(hotkey, sinf))) + seq_printf(seq, "%u\n", sinf[field]); + else + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Couldn't retrieve BIOS data\n")); + + return_VALUE(AE_OK); +} + +/* ------------------------------------------------------------------------- + user interface functions + ------------------------------------------------------------------------- */ +/* read methods */ +/* Sinf read methods */ +#define PCC_SINF_READ_F(_name_, FUNC) \ +static int _name_(struct seq_file *seq, void *offset) \ +{ \ + return_VALUE(ACPI_SUCCESS(acpi_pcc_read_sinf_field(seq, \ + (FUNC))) \ + ? 0 : -EINVAL); \ +} + +PCC_SINF_READ_F(acpi_pcc_numbatteries_show, SINF_NUM_BATTERIES); +PCC_SINF_READ_F(acpi_pcc_lcdtype_show, SINF_LCD_TYPE); +PCC_SINF_READ_F(acpi_pcc_ac_brightness_max_show, SINF_AC_MAX_BRIGHT); +PCC_SINF_READ_F(acpi_pcc_ac_brightness_min_show, SINF_AC_MIN_BRIGHT); +PCC_SINF_READ_F(acpi_pcc_ac_brightness_show, SINF_AC_CUR_BRIGHT); +PCC_SINF_READ_F(acpi_pcc_dc_brightness_max_show, SINF_DC_MAX_BRIGHT); +PCC_SINF_READ_F(acpi_pcc_dc_brightness_min_show, SINF_DC_MIN_BRIGHT); +PCC_SINF_READ_F(acpi_pcc_dc_brightness_show, SINF_DC_CUR_BRIGHT); +PCC_SINF_READ_F(acpi_pcc_brightness_show, SINF_AC_CUR_BRIGHT); +PCC_SINF_READ_F(acpi_pcc_mute_show, SINF_MUTE); + +static int acpi_pcc_sticky_key_show(struct seq_file *seq, void *offset) +{ + struct acpi_hotkey *hotkey = seq->private; + + ACPI_FUNCTION_TRACE("acpi_pcc_sticky_key_show"); + + if (!hotkey || !hotkey->device) + return_VALUE(-EINVAL); + + seq_printf(seq, "%d\n", hotkey->sticky_mode); + + return_VALUE(0); +} + +static int acpi_pcc_keyinput_show(struct seq_file *seq, void *offset) +{ + struct acpi_hotkey *hotkey = seq->private; + struct input_dev *hotk_input_dev = hotkey->input_dev; + struct pcc_keyinput *keyinput = input_get_drvdata(hotk_input_dev); + + ACPI_FUNCTION_TRACE("acpi_pcc_keyinput_show"); + + seq_printf(seq, "%d\n", keyinput->key_mode); + + return_VALUE(0); +} + +static int acpi_pcc_version_show(struct seq_file *seq, void *offset) +{ + struct acpi_hotkey *hotkey = seq->private; + + ACPI_FUNCTION_TRACE("acpi_pcc_version_show"); + + if (!hotkey || !hotkey->device) + return_VALUE(-EINVAL); + + seq_printf(seq, "%s version %s\n", ACPI_PCC_DRIVER_NAME, + ACPI_PCC_VERSION); + seq_printf(seq, "%li functions\n", hotkey->num_sifr); + + return_VALUE(0); +} + +/* write methods */ +static ssize_t acpi_pcc_write_single_flag(struct file *file, + const char __user *buffer, + size_t count, + int sinf_func) +{ + struct seq_file *seq = file->private_data; + struct acpi_hotkey *hotkey = seq->private; + char write_string[PROC_STR_MAX_LEN]; + u32 val; + + ACPI_FUNCTION_TRACE("acpi_pcc_write_single_flag"); + + if (!hotkey || (count > sizeof(write_string) - 1)) + return_VALUE(-EINVAL); + + if (copy_from_user(write_string, buffer, count)) + return_VALUE(-EFAULT); + + write_string[count] = '\0'; + + if ((sscanf(write_string, "%3i", &val) == 1) && + (val == 0 || val == 1)) + acpi_pcc_write_sset(hotkey, sinf_func, val); + + return_VALUE(count); +} + +static unsigned long acpi_pcc_write_brightness(struct file *file, + const char __user *buffer, + size_t count, + int min_index, int max_index, + int cur_index) +{ + struct seq_file *seq = (struct seq_file *)file->private_data; + struct acpi_hotkey *hotkey = (struct acpi_hotkey *)seq->private; + char write_string[PROC_STR_MAX_LEN]; + u32 bright; + u32 sinf[hotkey->num_sifr + 1]; + + ACPI_FUNCTION_TRACE("acpi_pcc_write_brightness"); + + if (!hotkey || (count > sizeof(write_string) - 1)) + return_VALUE(-EINVAL); + + if (copy_from_user(write_string, buffer, count)) + return_VALUE(-EFAULT); + + write_string[count] = '\0'; + + if (ACPI_FAILURE(acpi_pcc_retrieve_biosdata(hotkey, sinf))) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Couldn't retrieve BIOS data\n")); + goto end; + } + + if ((sscanf(write_string, "%4i", &bright) == 1) && + (bright >= sinf[min_index]) && + (bright <= sinf[max_index])) + acpi_pcc_write_sset(hotkey, cur_index, bright); + +end: + return_VALUE(count); +} + +static ssize_t acpi_pcc_write_ac_brightness(struct file *file, + const char __user *buffer, + size_t count, loff_t *ppos) +{ + return_VALUE(acpi_pcc_write_brightness(file, buffer, count, + SINF_AC_MIN_BRIGHT, + SINF_AC_MAX_BRIGHT, + SINF_AC_CUR_BRIGHT)); +} + +static ssize_t acpi_pcc_write_dc_brightness(struct file *file, + const char __user *buffer, + size_t count, loff_t *ppos) +{ + return_VALUE(acpi_pcc_write_brightness(file, buffer, count, + SINF_DC_MIN_BRIGHT, + SINF_DC_MAX_BRIGHT, + SINF_DC_CUR_BRIGHT)); +} + +static ssize_t acpi_pcc_write_no_brightness(struct file *file, + const char __user *buffer, + size_t count, loff_t *ppos) +{ + return acpi_pcc_write_brightness(file, buffer, count, + SINF_AC_MIN_BRIGHT, + SINF_AC_MAX_BRIGHT, + SINF_AC_CUR_BRIGHT); +} + +static ssize_t acpi_pcc_write_mute(struct file *file, + const char __user *buffer, + size_t count, loff_t *ppos) +{ + return_VALUE(acpi_pcc_write_single_flag(file, buffer, count, + SINF_MUTE)); +} + +static ssize_t acpi_pcc_write_sticky_key(struct file *file, + const char __user *buffer, + size_t count, loff_t *ppos) +{ + struct seq_file *seq = (struct seq_file *)file->private_data; + struct acpi_hotkey *hotkey = (struct acpi_hotkey *)seq->private; + char write_string[PROC_STR_MAX_LEN]; + int mode; + + ACPI_FUNCTION_TRACE("acpi_pcc_write_sticky_key"); + + if (!hotkey || (count > sizeof(write_string) - 1)) + return_VALUE(-EINVAL); + + if (copy_from_user(write_string, buffer, count)) + return_VALUE(-EFAULT); + + write_string[count] = '\0'; + + if ((sscanf(write_string, "%3i", &mode) == 1) && + (mode == 0 || mode == 1)) { + acpi_pcc_write_sset(hotkey, SINF_STICKY_KEY, mode); + hotkey->sticky_mode = mode; + } + + return_VALUE(count); +} + +static ssize_t acpi_pcc_write_keyinput(struct file *file, + const char __user *buffer, + size_t count, loff_t *ppos) +{ + struct seq_file *seq = (struct seq_file *)file->private_data; + struct acpi_hotkey *hotkey = (struct acpi_hotkey *)seq->private; + struct pcc_keyinput *keyinput; + char write_string[PROC_STR_MAX_LEN]; + int key_mode; + + ACPI_FUNCTION_TRACE("acpi_pcc_write_keyinput"); + + if (!hotkey || (count > (sizeof(write_string) - 1))) + return_VALUE(-EINVAL); + + if (copy_from_user(write_string, buffer, count)) + return_VALUE(-EFAULT); + + write_string[count] = '\0'; + + if ((sscanf(write_string, "%4i", &key_mode) == 1) && + (key_mode == 0 || key_mode == 1)) { + keyinput = input_get_drvdata(hotkey->input_dev); + keyinput->key_mode = key_mode; + } + + return_VALUE(count); +} + +/* ------------------------------------------------------------------------- + hotkey driver + ------------------------------------------------------------------------- */ +static void acpi_pcc_generete_keyinput(struct acpi_hotkey *hotkey) +{ + struct input_dev *hotk_input_dev = hotkey->input_dev; + struct pcc_keyinput *keyinput = input_get_drvdata(hotk_input_dev); + int hinf = hotkey->status; + int key_code, hkey_num; + const int key_map[] = { + /* 0 */ -1, + /* 1 */ KEY_BRIGHTNESSDOWN, + /* 2 */ KEY_BRIGHTNESSUP, + /* 3 */ -1, /* vga/lcd switch event is not occur on + hotkey driver. */ + /* 4 */ KEY_MUTE, + /* 5 */ KEY_VOLUMEDOWN, + /* 6 */ KEY_VOLUMEUP, + /* 7 */ KEY_SLEEP, + /* 8 */ -1, /* Change CPU boost: do nothing */ + /* 9 */ KEY_BATT, + /* 10 */ KEY_SUSPEND, + }; + + ACPI_FUNCTION_TRACE("acpi_pcc_generete_keyinput"); + + if (keyinput->key_mode == 0) + return_VOID; + + hkey_num = hinf & 0xf; + + if ((0 > hkey_num) || + (hkey_num > ARRAY_SIZE(key_map))) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "hotkey number out of range: %d\n", + hkey_num)); + return_VOID; + } + + key_code = key_map[hkey_num]; + + if (key_code != -1) { + int pushed = (hinf & 0x80) ? TRUE : FALSE; + + input_report_key(hotk_input_dev, key_code, pushed); + input_sync(hotk_input_dev); + } +} + +static int acpi_pcc_hotkey_get_key(struct acpi_hotkey *hotkey) +{ + unsigned long result; + acpi_status status = AE_OK; + + ACPI_FUNCTION_TRACE("acpi_pcc_hotkey_get_key"); + + status = acpi_evaluate_integer(hotkey->handle, METHOD_HKEY_QUERY, + NULL, &result); + if (likely(ACPI_SUCCESS(status))) + hotkey->status = result; + else + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "error getting hotkey status\n")); + + return_VALUE(status == AE_OK); +} + +void acpi_pcc_hotkey_notify(acpi_handle handle, u32 event, void *data) +{ + struct acpi_hotkey *hotkey = (struct acpi_hotkey *) data; + + ACPI_FUNCTION_TRACE("acpi_pcc_hotkey_notify"); + + switch (event) { + case HKEY_NOTIFY: + if (acpi_pcc_hotkey_get_key(hotkey)) { + /* generate event like '"pcc HKEY 00000080 00000084"' + * when Fn+F4 pressed */ + acpi_bus_generate_proc_event(hotkey->device, event, + hotkey->status); + } + acpi_pcc_generete_keyinput(hotkey); + break; + default: + /* nothing to do */ + break; + } + return_VOID; +} + +/* ************************************************************************* + FS Interface (/proc) + ************************************************************************* */ +/* oepn proc file fs*/ +SEQ_OPEN_FS(acpi_pcc_dc_brightness_open_fs, acpi_pcc_dc_brightness_show); +SEQ_OPEN_FS(acpi_pcc_numbatteries_open_fs, acpi_pcc_numbatteries_show); +SEQ_OPEN_FS(acpi_pcc_lcdtype_open_fs, acpi_pcc_lcdtype_show); +SEQ_OPEN_FS(acpi_pcc_ac_brightness_max_open_fs, + acpi_pcc_ac_brightness_max_show); +SEQ_OPEN_FS(acpi_pcc_ac_brightness_min_open_fs, + acpi_pcc_ac_brightness_min_show); +SEQ_OPEN_FS(acpi_pcc_ac_brightness_open_fs, acpi_pcc_ac_brightness_show); +SEQ_OPEN_FS(acpi_pcc_dc_brightness_max_open_fs, + acpi_pcc_dc_brightness_max_show); +SEQ_OPEN_FS(acpi_pcc_dc_brightness_min_open_fs, + acpi_pcc_dc_brightness_min_show); +SEQ_OPEN_FS(acpi_pcc_brightness_open_fs, acpi_pcc_brightness_show); +SEQ_OPEN_FS(acpi_pcc_mute_open_fs, acpi_pcc_mute_show); +SEQ_OPEN_FS(acpi_pcc_version_open_fs, acpi_pcc_version_show); +SEQ_OPEN_FS(acpi_pcc_keyinput_open_fs, acpi_pcc_keyinput_show); +SEQ_OPEN_FS(acpi_pcc_sticky_key_open_fs, acpi_pcc_sticky_key_show); + +static struct file_operations acpi_pcc_numbatteries_fops = + SEQ_FILEOPS_R(acpi_pcc_numbatteries_open_fs); +static struct file_operations acpi_pcc_lcdtype_fops = + SEQ_FILEOPS_R(acpi_pcc_lcdtype_open_fs); +static struct file_operations acpi_pcc_mute_fops = + SEQ_FILEOPS_RW(acpi_pcc_mute_open_fs, acpi_pcc_write_mute); +static struct file_operations acpi_pcc_ac_brightness_fops = + SEQ_FILEOPS_RW(acpi_pcc_ac_brightness_open_fs, + acpi_pcc_write_ac_brightness); +static struct file_operations acpi_pcc_ac_brightness_max_fops = + SEQ_FILEOPS_R(acpi_pcc_ac_brightness_max_open_fs); +static struct file_operations acpi_pcc_ac_brightness_min_fops = + SEQ_FILEOPS_R(acpi_pcc_ac_brightness_min_open_fs); +static struct file_operations acpi_pcc_dc_brightness_fops = + SEQ_FILEOPS_RW(acpi_pcc_dc_brightness_open_fs, + acpi_pcc_write_dc_brightness); +static struct file_operations acpi_pcc_dc_brightness_max_fops = + SEQ_FILEOPS_R(acpi_pcc_dc_brightness_max_open_fs); +static struct file_operations acpi_pcc_dc_brightness_min_fops = + SEQ_FILEOPS_R(acpi_pcc_dc_brightness_min_open_fs); +static struct file_operations acpi_pcc_brightness_fops = + SEQ_FILEOPS_RW(acpi_pcc_brightness_open_fs, + acpi_pcc_write_no_brightness); +static struct file_operations acpi_pcc_sticky_key_fops = + SEQ_FILEOPS_RW(acpi_pcc_sticky_key_open_fs, acpi_pcc_write_sticky_key); +static struct file_operations acpi_pcc_keyinput_fops = + SEQ_FILEOPS_RW(acpi_pcc_keyinput_open_fs, acpi_pcc_write_keyinput); +static struct file_operations acpi_pcc_version_fops = + SEQ_FILEOPS_R(acpi_pcc_version_open_fs); + +struct proc_item { + const char *name; + struct file_operations *fops; + mode_t flag; +}; + +/* Note: These functions map *exactly* to the SINF/SSET functions */ +struct proc_item acpi_pcc_proc_items_sifr[] = { + { "num_batteries", &acpi_pcc_numbatteries_fops, S_IRUGO }, + { "lcd_type", &acpi_pcc_lcdtype_fops, S_IRUGO }, + { "ac_brightness_max", &acpi_pcc_ac_brightness_max_fops, S_IRUGO }, + { "ac_brightness_min", &acpi_pcc_ac_brightness_min_fops, S_IRUGO }, + { "ac_brightness", &acpi_pcc_ac_brightness_fops, + S_IFREG | S_IRUGO | S_IWUSR }, + { "dc_brightness_max", &acpi_pcc_dc_brightness_max_fops, S_IRUGO }, + { "dc_brightness_min", &acpi_pcc_dc_brightness_min_fops, S_IRUGO }, + { "dc_brightness", &acpi_pcc_dc_brightness_fops, + S_IFREG | S_IRUGO | S_IWUSR }, + { "brightness", &acpi_pcc_brightness_fops, S_IFREG | S_IRUGO | S_IWUSR}, + { "mute", &acpi_pcc_mute_fops, S_IFREG | S_IRUGO | S_IWUSR }, + { NULL, NULL, 0 }, +}; + +struct proc_item acpi_pcc_proc_items[] = { + { "sticky_key", &acpi_pcc_sticky_key_fops, S_IFREG | S_IRUGO | S_IWUSR}, + { "keyinput", &acpi_pcc_keyinput_fops, S_IFREG | S_IRUGO | S_IWUSR }, + { "version", &acpi_pcc_version_fops, S_IRUGO }, + { NULL, NULL, 0 }, +}; + +static int __devinit acpi_pcc_add_device(struct acpi_device *device, + struct proc_item *proc_items, + int num) +{ + struct acpi_hotkey *hotkey = acpi_driver_data(device); + struct proc_dir_entry *proc; + struct proc_item *item; + int i; + + for (item = proc_items, i = 0; item->name && i < num; ++item, ++i) { + proc = create_proc_entry(item->name, item->flag, + hotkey->proc_dir_entry); + if (likely(proc)) { + proc->proc_fops = item->fops; + proc->data = hotkey; + proc->owner = THIS_MODULE; + } else { + while (i-- > 0) { + item--; + remove_proc_entry(item->name, + hotkey->proc_dir_entry); + } + return_VALUE(-ENODEV); + } + } + return_VALUE(0); +} + +static int __devinit acpi_pcc_proc_init(struct acpi_device *device) +{ + struct proc_dir_entry *acpi_pcc_dir; + struct acpi_hotkey *hotkey = acpi_driver_data(device); + acpi_status status; + + ACPI_FUNCTION_TRACE("acpi_pcc_proc_init"); + + acpi_pcc_dir = proc_mkdir(PROC_PCC, acpi_root_dir); + + if (unlikely(!acpi_pcc_dir)) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Couldn't create dir in /proc\n")); + return_VALUE(-ENODEV); + } + + acpi_pcc_dir->owner = THIS_MODULE; + hotkey->proc_dir_entry = acpi_pcc_dir; + + status = acpi_pcc_add_device(device, acpi_pcc_proc_items_sifr, + hotkey->num_sifr); + status |= acpi_pcc_add_device(device, acpi_pcc_proc_items, + ARRAY_SIZE(acpi_pcc_proc_items)); + if (unlikely(status)) { + remove_proc_entry(PROC_PCC, acpi_root_dir); + hotkey->proc_dir_entry = NULL; + return_VALUE(-ENODEV); + } + + return_VALUE(status); +} + +static void __devexit acpi_pcc_remove_device(struct acpi_device *device, + struct proc_item *proc_items, + int num) +{ + struct acpi_hotkey *hotkey = acpi_driver_data(device); + struct proc_item *item; + int i; + + for (item = proc_items, i = 0; + item->name != NULL && i < num; + ++item, ++i) { + remove_proc_entry(item->name, hotkey->proc_dir_entry); + } + + return_VOID; +} + +/* ************************************************************************* + Power Management + ************************************************************************* */ +#ifdef CONFIG_PM +static int acpi_pcc_hotkey_resume(struct acpi_device *device) +{ + struct acpi_hotkey *hotkey = acpi_driver_data(device); + acpi_status status = AE_OK; + + ACPI_FUNCTION_TRACE("acpi_pcc_hotkey_resume"); + + if (device == NULL || hotkey == NULL) + return_VALUE(-EINVAL); + + if (hotkey->num_sifr != 0) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Sticky mode restore: %d\n", + hotkey->sticky_mode)); + + status = acpi_pcc_write_sset(hotkey, SINF_STICKY_KEY, + hotkey->sticky_mode); + } + if (status != AE_OK) + return_VALUE(-EINVAL); + + return_VALUE(0); +} +#endif + +/* ************************************************************************* + Module init/remove + ************************************************************************* */ +/* ------------------------------------------------------------------------- + input + ------------------------------------------------------------------------- */ +static int __devinit acpi_pcc_init_input(struct acpi_hotkey *hotkey) +{ + struct input_dev *hotk_input_dev; + struct pcc_keyinput *pcc_keyinput; + int error; + + ACPI_FUNCTION_TRACE("acpi_pcc_init_input"); + + hotk_input_dev = input_allocate_device(); + if (hotk_input_dev == NULL) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Couldn't allocate input device for hotkey")); + goto err_input; + } + + pcc_keyinput = kcalloc(1, sizeof(struct pcc_keyinput), GFP_KERNEL); + + if (pcc_keyinput == NULL) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Couldn't allocate mem for private data")); + goto err_pcc; + } + + hotk_input_dev->evbit[0] = BIT(EV_KEY); + + set_bit(KEY_BRIGHTNESSDOWN, hotk_input_dev->keybit); + set_bit(KEY_BRIGHTNESSUP, hotk_input_dev->keybit); + set_bit(KEY_MUTE, hotk_input_dev->keybit); + set_bit(KEY_VOLUMEDOWN, hotk_input_dev->keybit); + set_bit(KEY_VOLUMEUP, hotk_input_dev->keybit); + set_bit(KEY_SLEEP, hotk_input_dev->keybit); + set_bit(KEY_BATT, hotk_input_dev->keybit); + set_bit(KEY_SUSPEND, hotk_input_dev->keybit); + + hotk_input_dev->name = ACPI_PCC_DRIVER_NAME; + hotk_input_dev->phys = ACPI_PCC_INPUT_PHYS; + hotk_input_dev->id.bustype = BUS_PCC_HOTKEY; + hotk_input_dev->id.vendor = 0x0001; + hotk_input_dev->id.product = 0x0001; + hotk_input_dev->id.version = 0x0100; + + pcc_keyinput->key_mode = PCC_KEYINPUT_MODE; + pcc_keyinput->hotkey = hotkey; + + input_set_drvdata(hotk_input_dev, pcc_keyinput); + + hotkey->input_dev = hotk_input_dev; + + error = input_register_device(hotk_input_dev); + + if (error) + goto err_pcc; + + return_VALUE(0); + + err_pcc: + input_unregister_device(hotk_input_dev); + err_input: + return_VALUE(-ENOMEM); +} + +static void __devexit acpi_pcc_remove_input(struct acpi_hotkey *hotkey) +{ + struct input_dev *hotk_input_dev; + struct pcc_keyinput *pcc_keyinput; + + ACPI_FUNCTION_TRACE("acpi_pcc_remove_input"); + + if (hotkey == NULL) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Can't free memory")); + return_VOID; + } + + hotk_input_dev = hotkey->input_dev; + pcc_keyinput = input_get_drvdata(hotk_input_dev); + + input_unregister_device(hotk_input_dev); + + kfree(pcc_keyinput); +} + +/* ------------------------------------------------------------------------- + ACPI + ------------------------------------------------------------------------- */ +static int __devinit acpi_pcc_hotkey_add(struct acpi_device *device) +{ + acpi_status status = AE_OK; + struct acpi_hotkey *hotkey = NULL; + int sifr_status, num_sifr, result; + + ACPI_FUNCTION_TRACE("acpi_pcc_hotkey_add"); + + if (device == NULL) + return_VALUE(-EINVAL); + + sifr_status = acpi_pcc_get_sqty(device); + + if (sifr_status > 255) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "num_sifr too large")); + return_VALUE(-ENODEV); + } + + if (sifr_status < 0) { + ACPI_DEBUG_PRINT((ACPI_DB_INFO, "not support SQTY")); + num_sifr = 0; + } else { + num_sifr = sifr_status; + } + + hotkey = kcalloc(1, sizeof(struct acpi_hotkey), GFP_KERNEL); + if (hotkey == NULL) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Couldn't allocate mem for hotkey")); + return_VALUE(-ENOMEM); + } + + hotkey->device = device; + hotkey->handle = device->handle; + hotkey->num_sifr = num_sifr; + acpi_driver_data(device) = hotkey; + strcpy(acpi_device_name(device), ACPI_PCC_DEVICE_NAME); + strcpy(acpi_device_class(device), ACPI_PCC_CLASS); + + status = acpi_install_notify_handler(hotkey->handle, + ACPI_DEVICE_NOTIFY, + acpi_pcc_hotkey_notify, + hotkey); + + if (ACPI_FAILURE(status)) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Error installing notify handler\n")); + kfree(hotkey); + return_VALUE(-ENODEV); + } + + result = acpi_pcc_init_input(hotkey); + if (result != 0) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Error installing keyinput handler\n")); + kfree(hotkey); + return_VALUE(result); + } + + return_VALUE(acpi_pcc_proc_init(device)); +} + +static int __devexit acpi_pcc_hotkey_remove(struct acpi_device *device, + int type) +{ + acpi_status status = AE_OK; + struct acpi_hotkey *hotkey = acpi_driver_data(device); + + ACPI_FUNCTION_TRACE("acpi_pcc_hotkey_remove"); + + if (!device || !hotkey) + return_VALUE(-EINVAL); + + if (hotkey->proc_dir_entry) { + acpi_pcc_remove_device(device, acpi_pcc_proc_items_sifr, + hotkey->num_sifr); + acpi_pcc_remove_device(device, acpi_pcc_proc_items, + ARRAY_SIZE(acpi_pcc_proc_items)); + remove_proc_entry(PROC_PCC, acpi_root_dir); + } + + status = acpi_remove_notify_handler(hotkey->handle, + ACPI_DEVICE_NOTIFY, acpi_pcc_hotkey_notify); + + if (ACPI_FAILURE(status)) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Error removing notify handler\n")); + } + + acpi_pcc_remove_input(hotkey); + kfree(hotkey); + return_VALUE(status == AE_OK); +} + +/* ********************************************************************* + Module entry point + ********************************************************************* */ +static int __init acpi_pcc_init(void) +{ + int result; + + ACPI_FUNCTION_TRACE("acpi_pcc_init"); + + printk(KERN_INFO LOGPREFIX "loading...\n"); + + if (acpi_disabled) { + printk(KERN_INFO LOGPREFIX "ACPI disabled.\n"); + return_VALUE(-ENODEV); + } + + result = acpi_bus_register_driver(&acpi_pcc_driver); + if (result < 0) { + ACPI_DEBUG_PRINT((ACPI_DB_ERROR, + "Error registering hotkey driver\n")); + return_VALUE(-ENODEV); + } + + return_VALUE(result); +} + +static void __exit acpi_pcc_exit(void) +{ + ACPI_FUNCTION_TRACE("acpi_pcc_exit"); + + printk(KERN_INFO LOGPREFIX "unloading...\n"); + + acpi_bus_unregister_driver(&acpi_pcc_driver); + + return_VOID; +} + +module_init(acpi_pcc_init); +module_exit(acpi_pcc_exit); diff --git a/drivers/staging/poch/Kconfig b/drivers/staging/poch/Kconfig new file mode 100644 index 000000000000..b3b33b984a57 --- /dev/null +++ b/drivers/staging/poch/Kconfig @@ -0,0 +1,6 @@ +config POCH + tristate "Redrapids Pocket Change CardBus support" + depends on PCI && UIO + default N + ---help--- + Enable support for Redrapids Pocket Change CardBus devices. diff --git a/drivers/staging/poch/Makefile b/drivers/staging/poch/Makefile new file mode 100644 index 000000000000..d2b96805cb9e --- /dev/null +++ b/drivers/staging/poch/Makefile @@ -0,0 +1 @@ +obj-$(CONFIG_POCH) += poch.o diff --git a/drivers/staging/poch/README b/drivers/staging/poch/README new file mode 100644 index 000000000000..f65e979743ba --- /dev/null +++ b/drivers/staging/poch/README @@ -0,0 +1,7 @@ +TODO: + - fix transmit overflows + - audit userspace interfaces + - get reserved major/minor if needed + +Please send patches to Greg Kroah-Hartman <greg@kroah.com> and +Vijay Kumar <vijaykumar@bravegnu.org> and Jaya Kumar <jayakumar.lkml@gmail.com> diff --git a/drivers/staging/poch/poch.c b/drivers/staging/poch/poch.c new file mode 100644 index 000000000000..0e113f9a1581 --- /dev/null +++ b/drivers/staging/poch/poch.c @@ -0,0 +1,1425 @@ +/* + * User-space DMA and UIO based Redrapids Pocket Change CardBus driver + * + * Copyright 2008 Vijay Kumar <vijaykumar@bravegnu.org> + * + * Licensed under GPL version 2 only. + */ + +#include <linux/device.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/uio_driver.h> +#include <linux/spinlock.h> +#include <linux/cdev.h> +#include <linux/delay.h> +#include <linux/sysfs.h> +#include <linux/poll.h> +#include <linux/idr.h> +#include <linux/interrupt.h> +#include <linux/init.h> +#include <linux/ioctl.h> +#include <linux/io.h> + +#include "poch.h" + +#include <asm/cacheflush.h> + +#ifndef PCI_VENDOR_ID_RRAPIDS +#define PCI_VENDOR_ID_RRAPIDS 0x17D2 +#endif + +#ifndef PCI_DEVICE_ID_RRAPIDS_POCKET_CHANGE +#define PCI_DEVICE_ID_RRAPIDS_POCKET_CHANGE 0x0351 +#endif + +#define POCH_NCHANNELS 2 + +#define MAX_POCH_CARDS 8 +#define MAX_POCH_DEVICES (MAX_POCH_CARDS * POCH_NCHANNELS) + +#define DRV_NAME "poch" +#define PFX DRV_NAME ": " + +/* + * BAR0 Bridge Register Definitions + */ + +#define BRIDGE_REV_REG 0x0 +#define BRIDGE_INT_MASK_REG 0x4 +#define BRIDGE_INT_STAT_REG 0x8 + +#define BRIDGE_INT_ACTIVE (0x1 << 31) +#define BRIDGE_INT_FPGA (0x1 << 2) +#define BRIDGE_INT_TEMP_FAIL (0x1 << 1) +#define BRIDGE_INT_TEMP_WARN (0x1 << 0) + +#define BRIDGE_FPGA_RESET_REG 0xC + +#define BRIDGE_CARD_POWER_REG 0x10 +#define BRIDGE_CARD_POWER_EN (0x1 << 0) +#define BRIDGE_CARD_POWER_PROG_DONE (0x1 << 31) + +#define BRIDGE_JTAG_REG 0x14 +#define BRIDGE_DMA_GO_REG 0x18 +#define BRIDGE_STAT_0_REG 0x1C +#define BRIDGE_STAT_1_REG 0x20 +#define BRIDGE_STAT_2_REG 0x24 +#define BRIDGE_STAT_3_REG 0x28 +#define BRIDGE_TEMP_STAT_REG 0x2C +#define BRIDGE_TEMP_THRESH_REG 0x30 +#define BRIDGE_EEPROM_REVSEL_REG 0x34 +#define BRIDGE_CIS_STRUCT_REG 0x100 +#define BRIDGE_BOARDREV_REG 0x124 + +/* + * BAR1 FPGA Register Definitions + */ + +#define FPGA_IFACE_REV_REG 0x0 +#define FPGA_RX_BLOCK_SIZE_REG 0x8 +#define FPGA_TX_BLOCK_SIZE_REG 0xC +#define FPGA_RX_BLOCK_COUNT_REG 0x10 +#define FPGA_TX_BLOCK_COUNT_REG 0x14 +#define FPGA_RX_CURR_DMA_BLOCK_REG 0x18 +#define FPGA_TX_CURR_DMA_BLOCK_REG 0x1C +#define FPGA_RX_GROUP_COUNT_REG 0x20 +#define FPGA_TX_GROUP_COUNT_REG 0x24 +#define FPGA_RX_CURR_GROUP_REG 0x28 +#define FPGA_TX_CURR_GROUP_REG 0x2C +#define FPGA_RX_CURR_PCI_REG 0x38 +#define FPGA_TX_CURR_PCI_REG 0x3C +#define FPGA_RX_GROUP0_START_REG 0x40 +#define FPGA_TX_GROUP0_START_REG 0xC0 +#define FPGA_DMA_DESC_1_REG 0x140 +#define FPGA_DMA_DESC_2_REG 0x144 +#define FPGA_DMA_DESC_3_REG 0x148 +#define FPGA_DMA_DESC_4_REG 0x14C + +#define FPGA_DMA_INT_STAT_REG 0x150 +#define FPGA_DMA_INT_MASK_REG 0x154 +#define FPGA_DMA_INT_RX (1 << 0) +#define FPGA_DMA_INT_TX (1 << 1) + +#define FPGA_RX_GROUPS_PER_INT_REG 0x158 +#define FPGA_TX_GROUPS_PER_INT_REG 0x15C +#define FPGA_DMA_ADR_PAGE_REG 0x160 +#define FPGA_FPGA_REV_REG 0x200 + +#define FPGA_ADC_CLOCK_CTL_REG 0x204 +#define FPGA_ADC_CLOCK_CTL_OSC_EN (0x1 << 3) +#define FPGA_ADC_CLOCK_LOCAL_CLK (0x1 | FPGA_ADC_CLOCK_CTL_OSC_EN) +#define FPGA_ADC_CLOCK_EXT_SAMP_CLK 0X0 + +#define FPGA_ADC_DAC_EN_REG 0x208 +#define FPGA_ADC_DAC_EN_DAC_OFF (0x1 << 1) +#define FPGA_ADC_DAC_EN_ADC_OFF (0x1 << 0) + +#define FPGA_INT_STAT_REG 0x20C +#define FPGA_INT_MASK_REG 0x210 +#define FPGA_INT_PLL_UNLOCKED (0x1 << 9) +#define FPGA_INT_DMA_CORE (0x1 << 8) +#define FPGA_INT_TX_FF_EMPTY (0x1 << 7) +#define FPGA_INT_RX_FF_EMPTY (0x1 << 6) +#define FPGA_INT_TX_FF_OVRFLW (0x1 << 3) +#define FPGA_INT_RX_FF_OVRFLW (0x1 << 2) +#define FPGA_INT_TX_ACQ_DONE (0x1 << 1) +#define FPGA_INT_RX_ACQ_DONE (0x1) + +#define FPGA_RX_ADC_CTL_REG 0x214 +#define FPGA_RX_ADC_CTL_CONT_CAP (0x0) +#define FPGA_RX_ADC_CTL_SNAP_CAP (0x1) + +#define FPGA_RX_ARM_REG 0x21C + +#define FPGA_DOM_REG 0x224 +#define FPGA_DOM_DCM_RESET (0x1 << 5) +#define FPGA_DOM_SOFT_RESET (0x1 << 4) +#define FPGA_DOM_DUAL_M_SG_DMA (0x0) +#define FPGA_DOM_TARGET_ACCESS (0x1) + +#define FPGA_TX_CTL_REG 0x228 +#define FPGA_TX_CTL_FIFO_FLUSH (0x1 << 9) +#define FPGA_TX_CTL_OUTPUT_ZERO (0x0 << 2) +#define FPGA_TX_CTL_OUTPUT_CARDBUS (0x1 << 2) +#define FPGA_TX_CTL_OUTPUT_ADC (0x2 << 2) +#define FPGA_TX_CTL_OUTPUT_SNAPSHOT (0x3 << 2) +#define FPGA_TX_CTL_LOOPBACK (0x1 << 0) + +#define FPGA_ENDIAN_MODE_REG 0x22C +#define FPGA_RX_FIFO_COUNT_REG 0x28C +#define FPGA_TX_ENABLE_REG 0x298 +#define FPGA_TX_TRIGGER_REG 0x29C +#define FPGA_TX_DATAMEM_COUNT_REG 0x2A8 +#define FPGA_CAP_FIFO_REG 0x300 +#define FPGA_TX_SNAPSHOT_REG 0x8000 + +/* + * Channel Index Definitions + */ + +enum { + CHNO_RX_CHANNEL, + CHNO_TX_CHANNEL, +}; + +struct poch_dev; + +enum channel_dir { + CHANNEL_DIR_RX, + CHANNEL_DIR_TX, +}; + +struct poch_group_info { + struct page *pg; + dma_addr_t dma_addr; + unsigned long user_offset; +}; + +struct channel_info { + unsigned int chno; + + atomic_t sys_block_size; + atomic_t sys_group_size; + atomic_t sys_group_count; + + enum channel_dir dir; + + unsigned long block_size; + unsigned long group_size; + unsigned long group_count; + + /* Contains the DMA address and VM offset of each group. */ + struct poch_group_info *groups; + + /* Contains the header and circular buffer exported to userspace. */ + spinlock_t group_offsets_lock; + struct poch_cbuf_header *header; + struct page *header_pg; + unsigned long header_size; + + /* Last group indicated as 'complete' to user space. */ + unsigned int transfer; + + wait_queue_head_t wq; + + union { + unsigned int data_available; + unsigned int space_available; + }; + + void __iomem *bridge_iomem; + void __iomem *fpga_iomem; + spinlock_t *iomem_lock; + + atomic_t free; + atomic_t inited; + + /* Error counters */ + struct poch_counters counters; + spinlock_t counters_lock; + + struct device *dev; +}; + +struct poch_dev { + struct uio_info uio; + struct pci_dev *pci_dev; + unsigned int nchannels; + struct channel_info channels[POCH_NCHANNELS]; + struct cdev cdev; + + /* Counts the no. of channels that have been opened. On first + * open, the card is powered on. On last channel close, the + * card is powered off. + */ + atomic_t usage; + + void __iomem *bridge_iomem; + void __iomem *fpga_iomem; + spinlock_t iomem_lock; + + struct device *dev; +}; + +static dev_t poch_first_dev; +static struct class *poch_cls; +static DEFINE_IDR(poch_ids); + +static ssize_t store_block_size(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct channel_info *channel = dev_get_drvdata(dev); + unsigned long block_size; + + sscanf(buf, "%lu", &block_size); + atomic_set(&channel->sys_block_size, block_size); + + return count; +} +static DEVICE_ATTR(block_size, S_IWUSR|S_IWGRP, NULL, store_block_size); + +static ssize_t store_group_size(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct channel_info *channel = dev_get_drvdata(dev); + unsigned long group_size; + + sscanf(buf, "%lu", &group_size); + atomic_set(&channel->sys_group_size, group_size); + + return count; +} +static DEVICE_ATTR(group_size, S_IWUSR|S_IWGRP, NULL, store_group_size); + +static ssize_t store_group_count(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct channel_info *channel = dev_get_drvdata(dev); + unsigned long group_count; + + sscanf(buf, "%lu", &group_count); + atomic_set(&channel->sys_group_count, group_count); + + return count; +} +static DEVICE_ATTR(group_count, S_IWUSR|S_IWGRP, NULL, store_group_count); + +static ssize_t show_direction(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct channel_info *channel = dev_get_drvdata(dev); + int len; + + len = sprintf(buf, "%s\n", (channel->dir ? "tx" : "rx")); + return len; +} +static DEVICE_ATTR(dir, S_IRUSR|S_IRGRP, show_direction, NULL); + +static ssize_t show_mmap_size(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct channel_info *channel = dev_get_drvdata(dev); + int len; + unsigned long mmap_size; + unsigned long group_pages; + unsigned long header_pages; + unsigned long total_group_pages; + + /* FIXME: We do not have to add 1, if group_size a multiple of + PAGE_SIZE. */ + group_pages = (channel->group_size / PAGE_SIZE) + 1; + header_pages = (channel->header_size / PAGE_SIZE) + 1; + total_group_pages = group_pages * channel->group_count; + + mmap_size = (header_pages + total_group_pages) * PAGE_SIZE; + len = sprintf(buf, "%lu\n", mmap_size); + return len; +} +static DEVICE_ATTR(mmap_size, S_IRUSR|S_IRGRP, show_mmap_size, NULL); + +static struct device_attribute *poch_class_attrs[] = { + &dev_attr_block_size, + &dev_attr_group_size, + &dev_attr_group_count, + &dev_attr_dir, + &dev_attr_mmap_size, +}; + +static void poch_channel_free_groups(struct channel_info *channel) +{ + unsigned long i; + + for (i = 0; i < channel->group_count; i++) { + struct poch_group_info *group; + unsigned int order; + + group = &channel->groups[i]; + order = get_order(channel->group_size); + if (group->pg) + __free_pages(group->pg, order); + } +} + +static int poch_channel_alloc_groups(struct channel_info *channel) +{ + unsigned long i; + unsigned long group_pages; + unsigned long header_pages; + + group_pages = (channel->group_size / PAGE_SIZE) + 1; + header_pages = (channel->header_size / PAGE_SIZE) + 1; + + for (i = 0; i < channel->group_count; i++) { + struct poch_group_info *group; + unsigned int order; + gfp_t gfp_mask; + + group = &channel->groups[i]; + order = get_order(channel->group_size); + + /* + * __GFP_COMP is required here since we are going to + * perform non-linear mapping to userspace. For more + * information read the vm_insert_page() function + * comments. + */ + + gfp_mask = GFP_KERNEL | GFP_DMA32 | __GFP_ZERO; + group->pg = alloc_pages(gfp_mask, order); + if (!group->pg) { + poch_channel_free_groups(channel); + return -ENOMEM; + } + + /* FIXME: This is the physical address not the bus + * address! This won't work in architectures that + * have an IOMMU. Can we use pci_map_single() for + * this? + */ + group->dma_addr = page_to_pfn(group->pg) * PAGE_SIZE; + group->user_offset = + (header_pages + (i * group_pages)) * PAGE_SIZE; + + printk(KERN_INFO PFX "%ld: user_offset: 0x%lx dma: 0x%x\n", i, + group->user_offset, group->dma_addr); + } + + return 0; +} + +static void channel_latch_attr(struct channel_info *channel) +{ + channel->group_count = atomic_read(&channel->sys_group_count); + channel->group_size = atomic_read(&channel->sys_group_size); + channel->block_size = atomic_read(&channel->sys_block_size); +} + +/* + * Configure DMA group registers + */ +static void channel_dma_init(struct channel_info *channel) +{ + void __iomem *fpga = channel->fpga_iomem; + u32 group_regs_base; + u32 group_reg; + unsigned int page; + unsigned int group_in_page; + unsigned long i; + u32 block_size_reg; + u32 block_count_reg; + u32 group_count_reg; + u32 groups_per_int_reg; + u32 curr_pci_reg; + + if (channel->chno == CHNO_RX_CHANNEL) { + group_regs_base = FPGA_RX_GROUP0_START_REG; + block_size_reg = FPGA_RX_BLOCK_SIZE_REG; + block_count_reg = FPGA_RX_BLOCK_COUNT_REG; + group_count_reg = FPGA_RX_GROUP_COUNT_REG; + groups_per_int_reg = FPGA_RX_GROUPS_PER_INT_REG; + curr_pci_reg = FPGA_RX_CURR_PCI_REG; + } else { + group_regs_base = FPGA_TX_GROUP0_START_REG; + block_size_reg = FPGA_TX_BLOCK_SIZE_REG; + block_count_reg = FPGA_TX_BLOCK_COUNT_REG; + group_count_reg = FPGA_TX_GROUP_COUNT_REG; + groups_per_int_reg = FPGA_TX_GROUPS_PER_INT_REG; + curr_pci_reg = FPGA_TX_CURR_PCI_REG; + } + + printk(KERN_WARNING "block_size, group_size, group_count\n"); + iowrite32(channel->block_size, fpga + block_size_reg); + iowrite32(channel->group_size / channel->block_size, + fpga + block_count_reg); + iowrite32(channel->group_count, fpga + group_count_reg); + /* FIXME: Hardcoded groups per int. Get it from sysfs? */ + iowrite32(1, fpga + groups_per_int_reg); + + /* Unlock PCI address? Not defined in the data sheet, but used + * in the reference code by Redrapids. + */ + iowrite32(0x1, fpga + curr_pci_reg); + + /* The DMA address page register is shared between the RX and + * TX channels, so acquire lock. + */ + spin_lock(channel->iomem_lock); + for (i = 0; i < channel->group_count; i++) { + page = i / 32; + group_in_page = i % 32; + + group_reg = group_regs_base + (group_in_page * 4); + + iowrite32(page, fpga + FPGA_DMA_ADR_PAGE_REG); + iowrite32(channel->groups[i].dma_addr, fpga + group_reg); + } + for (i = 0; i < channel->group_count; i++) { + page = i / 32; + group_in_page = i % 32; + + group_reg = group_regs_base + (group_in_page * 4); + + iowrite32(page, fpga + FPGA_DMA_ADR_PAGE_REG); + printk(KERN_INFO PFX "%ld: read dma_addr: 0x%x\n", i, + ioread32(fpga + group_reg)); + } + spin_unlock(channel->iomem_lock); + +} + +static int poch_channel_alloc_header(struct channel_info *channel) +{ + struct poch_cbuf_header *header = channel->header; + unsigned long group_offset_size; + unsigned long tot_group_offsets_size; + + /* Allocate memory to hold header exported userspace */ + group_offset_size = sizeof(header->group_offsets[0]); + tot_group_offsets_size = group_offset_size * channel->group_count; + channel->header_size = sizeof(*header) + tot_group_offsets_size; + channel->header_pg = alloc_pages(GFP_KERNEL | __GFP_ZERO, + get_order(channel->header_size)); + if (!channel->header_pg) + return -ENOMEM; + + channel->header = page_address(channel->header_pg); + + return 0; +} + +static void poch_channel_free_header(struct channel_info *channel) +{ + unsigned int order; + + order = get_order(channel->header_size); + __free_pages(channel->header_pg, order); +} + +static void poch_channel_init_header(struct channel_info *channel) +{ + int i; + struct poch_group_info *groups; + s32 *group_offsets; + + channel->header->group_size_bytes = channel->group_size; + channel->header->group_count = channel->group_count; + + spin_lock_init(&channel->group_offsets_lock); + + group_offsets = channel->header->group_offsets; + groups = channel->groups; + + for (i = 0; i < channel->group_count; i++) { + if (channel->dir == CHANNEL_DIR_RX) + group_offsets[i] = -1; + else + group_offsets[i] = groups[i].user_offset; + } +} + +static void __poch_channel_clear_counters(struct channel_info *channel) +{ + channel->counters.pll_unlock = 0; + channel->counters.fifo_empty = 0; + channel->counters.fifo_overflow = 0; +} + +static int poch_channel_init(struct channel_info *channel, + struct poch_dev *poch_dev) +{ + struct pci_dev *pdev = poch_dev->pci_dev; + struct device *dev = &pdev->dev; + unsigned long alloc_size; + int ret; + + printk(KERN_WARNING "channel_latch_attr\n"); + + channel_latch_attr(channel); + + channel->transfer = 0; + + /* Allocate memory to hold group information. */ + alloc_size = channel->group_count * sizeof(struct poch_group_info); + channel->groups = kzalloc(alloc_size, GFP_KERNEL); + if (!channel->groups) { + dev_err(dev, "error allocating memory for group info\n"); + ret = -ENOMEM; + goto out; + } + + printk(KERN_WARNING "poch_channel_alloc_groups\n"); + + ret = poch_channel_alloc_groups(channel); + if (ret) { + dev_err(dev, "error allocating groups of order %d\n", + get_order(channel->group_size)); + goto out_free_group_info; + } + + ret = poch_channel_alloc_header(channel); + if (ret) { + dev_err(dev, "error allocating user space header\n"); + goto out_free_groups; + } + + channel->fpga_iomem = poch_dev->fpga_iomem; + channel->bridge_iomem = poch_dev->bridge_iomem; + channel->iomem_lock = &poch_dev->iomem_lock; + spin_lock_init(&channel->counters_lock); + + __poch_channel_clear_counters(channel); + + printk(KERN_WARNING "poch_channel_init_header\n"); + + poch_channel_init_header(channel); + + return 0; + + out_free_groups: + poch_channel_free_groups(channel); + out_free_group_info: + kfree(channel->groups); + out: + return ret; +} + +static int poch_wait_fpga_prog(void __iomem *bridge) +{ + unsigned long total_wait; + const unsigned long wait_period = 100; + /* FIXME: Get the actual timeout */ + const unsigned long prog_timeo = 10000; /* 10 Seconds */ + u32 card_power; + + printk(KERN_WARNING "poch_wait_fpg_prog\n"); + + printk(KERN_INFO PFX "programming fpga ...\n"); + total_wait = 0; + while (1) { + msleep(wait_period); + total_wait += wait_period; + + card_power = ioread32(bridge + BRIDGE_CARD_POWER_REG); + if (card_power & BRIDGE_CARD_POWER_PROG_DONE) { + printk(KERN_INFO PFX "programming done\n"); + return 0; + } + if (total_wait > prog_timeo) { + printk(KERN_ERR PFX + "timed out while programming FPGA\n"); + return -EIO; + } + } +} + +static void poch_card_power_off(struct poch_dev *poch_dev) +{ + void __iomem *bridge = poch_dev->bridge_iomem; + u32 card_power; + + iowrite32(0, bridge + BRIDGE_INT_MASK_REG); + iowrite32(0, bridge + BRIDGE_DMA_GO_REG); + + card_power = ioread32(bridge + BRIDGE_CARD_POWER_REG); + iowrite32(card_power & ~BRIDGE_CARD_POWER_EN, + bridge + BRIDGE_CARD_POWER_REG); +} + +enum clk_src { + CLK_SRC_ON_BOARD, + CLK_SRC_EXTERNAL +}; + +static void poch_card_clock_on(void __iomem *fpga) +{ + /* FIXME: Get this data through sysfs? */ + enum clk_src clk_src = CLK_SRC_ON_BOARD; + + if (clk_src == CLK_SRC_ON_BOARD) { + iowrite32(FPGA_ADC_CLOCK_LOCAL_CLK | FPGA_ADC_CLOCK_CTL_OSC_EN, + fpga + FPGA_ADC_CLOCK_CTL_REG); + } else if (clk_src == CLK_SRC_EXTERNAL) { + iowrite32(FPGA_ADC_CLOCK_EXT_SAMP_CLK, + fpga + FPGA_ADC_CLOCK_CTL_REG); + } +} + +static int poch_card_power_on(struct poch_dev *poch_dev) +{ + void __iomem *bridge = poch_dev->bridge_iomem; + void __iomem *fpga = poch_dev->fpga_iomem; + + iowrite32(BRIDGE_CARD_POWER_EN, bridge + BRIDGE_CARD_POWER_REG); + + if (poch_wait_fpga_prog(bridge) != 0) { + poch_card_power_off(poch_dev); + return -EIO; + } + + poch_card_clock_on(fpga); + + /* Sync to new clock, reset state machines, set DMA mode. */ + iowrite32(FPGA_DOM_DCM_RESET | FPGA_DOM_SOFT_RESET + | FPGA_DOM_DUAL_M_SG_DMA, fpga + FPGA_DOM_REG); + + /* FIXME: The time required for sync. needs to be tuned. */ + msleep(1000); + + return 0; +} + +static void poch_channel_analog_on(struct channel_info *channel) +{ + void __iomem *fpga = channel->fpga_iomem; + u32 adc_dac_en; + + spin_lock(channel->iomem_lock); + adc_dac_en = ioread32(fpga + FPGA_ADC_DAC_EN_REG); + switch (channel->chno) { + case CHNO_RX_CHANNEL: + iowrite32(adc_dac_en & ~FPGA_ADC_DAC_EN_ADC_OFF, + fpga + FPGA_ADC_DAC_EN_REG); + break; + case CHNO_TX_CHANNEL: + iowrite32(adc_dac_en & ~FPGA_ADC_DAC_EN_DAC_OFF, + fpga + FPGA_ADC_DAC_EN_REG); + break; + } + spin_unlock(channel->iomem_lock); +} + +static int poch_open(struct inode *inode, struct file *filp) +{ + struct poch_dev *poch_dev; + struct channel_info *channel; + void __iomem *bridge; + void __iomem *fpga; + int chno; + int usage; + int ret; + + poch_dev = container_of(inode->i_cdev, struct poch_dev, cdev); + bridge = poch_dev->bridge_iomem; + fpga = poch_dev->fpga_iomem; + + chno = iminor(inode) % poch_dev->nchannels; + channel = &poch_dev->channels[chno]; + + if (!atomic_dec_and_test(&channel->free)) { + atomic_inc(&channel->free); + ret = -EBUSY; + goto out; + } + + usage = atomic_inc_return(&poch_dev->usage); + + printk(KERN_WARNING "poch_card_power_on\n"); + + if (usage == 1) { + ret = poch_card_power_on(poch_dev); + if (ret) + goto out_dec_usage; + } + + printk(KERN_INFO "CardBus Bridge Revision: %x\n", + ioread32(bridge + BRIDGE_REV_REG)); + printk(KERN_INFO "CardBus Interface Revision: %x\n", + ioread32(fpga + FPGA_IFACE_REV_REG)); + + channel->chno = chno; + filp->private_data = channel; + + printk(KERN_WARNING "poch_channel_init\n"); + + ret = poch_channel_init(channel, poch_dev); + if (ret) + goto out_power_off; + + poch_channel_analog_on(channel); + + printk(KERN_WARNING "channel_dma_init\n"); + + channel_dma_init(channel); + + printk(KERN_WARNING "poch_channel_analog_on\n"); + + if (usage == 1) { + printk(KERN_WARNING "setting up DMA\n"); + + /* Initialize DMA Controller. */ + iowrite32(FPGA_CAP_FIFO_REG, bridge + BRIDGE_STAT_2_REG); + iowrite32(FPGA_DMA_DESC_1_REG, bridge + BRIDGE_STAT_3_REG); + + ioread32(fpga + FPGA_DMA_INT_STAT_REG); + ioread32(fpga + FPGA_INT_STAT_REG); + ioread32(bridge + BRIDGE_INT_STAT_REG); + + /* Initialize Interrupts. FIXME: Enable temperature + * handling We are enabling both Tx and Rx channel + * interrupts here. Do we need to enable interrupts + * only for the current channel? Anyways we won't get + * the interrupt unless the DMA is activated. + */ + iowrite32(BRIDGE_INT_FPGA, bridge + BRIDGE_INT_MASK_REG); + iowrite32(FPGA_INT_DMA_CORE + | FPGA_INT_PLL_UNLOCKED + | FPGA_INT_TX_FF_EMPTY + | FPGA_INT_RX_FF_EMPTY + | FPGA_INT_TX_FF_OVRFLW + | FPGA_INT_RX_FF_OVRFLW, + fpga + FPGA_INT_MASK_REG); + iowrite32(FPGA_DMA_INT_RX | FPGA_DMA_INT_TX, + fpga + FPGA_DMA_INT_MASK_REG); + } + + if (channel->dir == CHANNEL_DIR_TX) { + /* Flush TX FIFO and output data from cardbus. */ + iowrite32(FPGA_TX_CTL_FIFO_FLUSH + | FPGA_TX_CTL_OUTPUT_CARDBUS, + fpga + FPGA_TX_CTL_REG); + } + + atomic_inc(&channel->inited); + + return 0; + + out_power_off: + if (usage == 1) + poch_card_power_off(poch_dev); + out_dec_usage: + atomic_dec(&poch_dev->usage); + atomic_inc(&channel->free); + out: + return ret; +} + +static int poch_release(struct inode *inode, struct file *filp) +{ + struct channel_info *channel = filp->private_data; + struct poch_dev *poch_dev; + int usage; + + poch_dev = container_of(inode->i_cdev, struct poch_dev, cdev); + + usage = atomic_dec_return(&poch_dev->usage); + if (usage == 0) { + printk(KERN_WARNING "poch_card_power_off\n"); + poch_card_power_off(poch_dev); + } + + atomic_dec(&channel->inited); + poch_channel_free_header(channel); + poch_channel_free_groups(channel); + kfree(channel->groups); + atomic_inc(&channel->free); + + return 0; +} + +/* + * Map the header and the group buffers, to user space. + */ +static int poch_mmap(struct file *filp, struct vm_area_struct *vma) +{ + struct channel_info *channel = filp->private_data; + + unsigned long start; + unsigned long size; + + unsigned long group_pages; + unsigned long header_pages; + unsigned long total_group_pages; + + int pg_num; + struct page *pg; + + int i; + int ret; + + printk(KERN_WARNING "poch_mmap\n"); + + if (vma->vm_pgoff) { + printk(KERN_WARNING PFX "page offset: %lu\n", vma->vm_pgoff); + return -EINVAL; + } + + group_pages = (channel->group_size / PAGE_SIZE) + 1; + header_pages = (channel->header_size / PAGE_SIZE) + 1; + total_group_pages = group_pages * channel->group_count; + + size = vma->vm_end - vma->vm_start; + if (size != (header_pages + total_group_pages) * PAGE_SIZE) { + printk(KERN_WARNING PFX "required %lu bytes\n", size); + return -EINVAL; + } + + start = vma->vm_start; + + /* FIXME: Cleanup required on failure? */ + pg = channel->header_pg; + for (pg_num = 0; pg_num < header_pages; pg_num++, pg++) { + printk(KERN_DEBUG PFX "page_count: %d\n", page_count(pg)); + printk(KERN_DEBUG PFX "%d: header: 0x%lx\n", pg_num, start); + ret = vm_insert_page(vma, start, pg); + if (ret) { + printk(KERN_DEBUG "vm_insert 1 failed at %lx\n", start); + return ret; + } + start += PAGE_SIZE; + } + + for (i = 0; i < channel->group_count; i++) { + pg = channel->groups[i].pg; + for (pg_num = 0; pg_num < group_pages; pg_num++, pg++) { + printk(KERN_DEBUG PFX "%d: group %d: 0x%lx\n", + pg_num, i, start); + ret = vm_insert_page(vma, start, pg); + if (ret) { + printk(KERN_DEBUG PFX + "vm_insert 2 failed at %d\n", pg_num); + return ret; + } + start += PAGE_SIZE; + } + } + + return 0; +} + +/* + * Check whether there is some group that the user space has not + * consumed yet. When the user space consumes a group, it sets it to + * -1. Cosuming could be reading data in case of RX and filling a + * buffer in case of TX. + */ +static int poch_channel_available(struct channel_info *channel) +{ + int i; + + spin_lock_irq(&channel->group_offsets_lock); + + for (i = 0; i < channel->group_count; i++) { + if (channel->dir == CHANNEL_DIR_RX + && channel->header->group_offsets[i] == -1) { + spin_unlock_irq(&channel->group_offsets_lock); + return 1; + } + + if (channel->dir == CHANNEL_DIR_TX + && channel->header->group_offsets[i] != -1) { + spin_unlock_irq(&channel->group_offsets_lock); + return 1; + } + } + + spin_unlock_irq(&channel->group_offsets_lock); + + return 0; +} + +static unsigned int poch_poll(struct file *filp, poll_table *pt) +{ + struct channel_info *channel = filp->private_data; + unsigned int ret = 0; + + poll_wait(filp, &channel->wq, pt); + + if (poch_channel_available(channel)) { + if (channel->dir == CHANNEL_DIR_RX) + ret = POLLIN | POLLRDNORM; + else + ret = POLLOUT | POLLWRNORM; + } + + return ret; +} + +static int poch_ioctl(struct inode *inode, struct file *filp, + unsigned int cmd, unsigned long arg) +{ + struct channel_info *channel = filp->private_data; + void __iomem *fpga = channel->fpga_iomem; + void __iomem *bridge = channel->bridge_iomem; + void __user *argp = (void __user *)arg; + struct vm_area_struct *vms; + struct poch_counters counters; + int ret; + + switch (cmd) { + case POCH_IOC_TRANSFER_START: + switch (channel->chno) { + case CHNO_TX_CHANNEL: + printk(KERN_INFO PFX "ioctl: Tx start\n"); + iowrite32(0x1, fpga + FPGA_TX_TRIGGER_REG); + iowrite32(0x1, fpga + FPGA_TX_ENABLE_REG); + + /* FIXME: Does it make sense to do a DMA GO + * twice, once in Tx and once in Rx. + */ + iowrite32(0x1, bridge + BRIDGE_DMA_GO_REG); + break; + case CHNO_RX_CHANNEL: + printk(KERN_INFO PFX "ioctl: Rx start\n"); + iowrite32(0x1, fpga + FPGA_RX_ARM_REG); + iowrite32(0x1, bridge + BRIDGE_DMA_GO_REG); + break; + } + break; + case POCH_IOC_TRANSFER_STOP: + switch (channel->chno) { + case CHNO_TX_CHANNEL: + printk(KERN_INFO PFX "ioctl: Tx stop\n"); + iowrite32(0x0, fpga + FPGA_TX_ENABLE_REG); + iowrite32(0x0, fpga + FPGA_TX_TRIGGER_REG); + iowrite32(0x0, bridge + BRIDGE_DMA_GO_REG); + break; + case CHNO_RX_CHANNEL: + printk(KERN_INFO PFX "ioctl: Rx stop\n"); + iowrite32(0x0, fpga + FPGA_RX_ARM_REG); + iowrite32(0x0, bridge + BRIDGE_DMA_GO_REG); + break; + } + break; + case POCH_IOC_GET_COUNTERS: + if (access_ok(VERIFY_WRITE, argp, sizeof(struct poch_counters))) + return -EFAULT; + + spin_lock_irq(&channel->counters_lock); + counters = channel->counters; + __poch_channel_clear_counters(channel); + spin_unlock_irq(&channel->counters_lock); + + ret = copy_to_user(argp, &counters, + sizeof(struct poch_counters)); + if (ret) + return ret; + + break; + case POCH_IOC_SYNC_GROUP_FOR_USER: + case POCH_IOC_SYNC_GROUP_FOR_DEVICE: + vms = find_vma(current->mm, arg); + if (!vms) + /* Address not mapped. */ + return -EINVAL; + if (vms->vm_file != filp) + /* Address mapped from different device/file. */ + return -EINVAL; + + flush_cache_range(vms, arg, arg + channel->group_size); + break; + } + return 0; +} + +static struct file_operations poch_fops = { + .owner = THIS_MODULE, + .open = poch_open, + .release = poch_release, + .ioctl = poch_ioctl, + .poll = poch_poll, + .mmap = poch_mmap +}; + +static void poch_irq_dma(struct channel_info *channel) +{ + u32 prev_transfer; + u32 curr_transfer; + long groups_done; + unsigned long i, j; + struct poch_group_info *groups; + s32 *group_offsets; + u32 curr_group_reg; + + if (!atomic_read(&channel->inited)) + return; + + prev_transfer = channel->transfer; + + if (channel->chno == CHNO_RX_CHANNEL) + curr_group_reg = FPGA_RX_CURR_GROUP_REG; + else + curr_group_reg = FPGA_TX_CURR_GROUP_REG; + + curr_transfer = ioread32(channel->fpga_iomem + curr_group_reg); + + groups_done = curr_transfer - prev_transfer; + /* Check wrap over, and handle it. */ + if (groups_done <= 0) + groups_done += channel->group_count; + + group_offsets = channel->header->group_offsets; + groups = channel->groups; + + spin_lock(&channel->group_offsets_lock); + + for (i = 0; i < groups_done; i++) { + j = (prev_transfer + i) % channel->group_count; + if (channel->dir == CHANNEL_DIR_RX) + group_offsets[j] = -1; + else + group_offsets[j] = groups[j].user_offset; + } + + spin_unlock(&channel->group_offsets_lock); + + channel->transfer = curr_transfer; + + wake_up_interruptible(&channel->wq); +} + +static irqreturn_t poch_irq_handler(int irq, void *p) +{ + struct poch_dev *poch_dev = p; + void __iomem *bridge = poch_dev->bridge_iomem; + void __iomem *fpga = poch_dev->fpga_iomem; + struct channel_info *channel_rx = &poch_dev->channels[CHNO_RX_CHANNEL]; + struct channel_info *channel_tx = &poch_dev->channels[CHNO_TX_CHANNEL]; + u32 bridge_stat; + u32 fpga_stat; + u32 dma_stat; + + bridge_stat = ioread32(bridge + BRIDGE_INT_STAT_REG); + fpga_stat = ioread32(fpga + FPGA_INT_STAT_REG); + dma_stat = ioread32(fpga + FPGA_DMA_INT_STAT_REG); + + ioread32(fpga + FPGA_DMA_INT_STAT_REG); + ioread32(fpga + FPGA_INT_STAT_REG); + ioread32(bridge + BRIDGE_INT_STAT_REG); + + if (bridge_stat & BRIDGE_INT_FPGA) { + if (fpga_stat & FPGA_INT_DMA_CORE) { + if (dma_stat & FPGA_DMA_INT_RX) + poch_irq_dma(channel_rx); + if (dma_stat & FPGA_DMA_INT_TX) + poch_irq_dma(channel_tx); + } + if (fpga_stat & FPGA_INT_PLL_UNLOCKED) { + channel_tx->counters.pll_unlock++; + channel_rx->counters.pll_unlock++; + if (printk_ratelimit()) + printk(KERN_WARNING PFX "PLL unlocked\n"); + } + if (fpga_stat & FPGA_INT_TX_FF_EMPTY) + channel_tx->counters.fifo_empty++; + if (fpga_stat & FPGA_INT_TX_FF_OVRFLW) + channel_tx->counters.fifo_overflow++; + if (fpga_stat & FPGA_INT_RX_FF_EMPTY) + channel_rx->counters.fifo_empty++; + if (fpga_stat & FPGA_INT_RX_FF_OVRFLW) + channel_rx->counters.fifo_overflow++; + + /* + * FIXME: These errors should be notified through the + * poll interface as POLLERR. + */ + + /* Re-enable interrupts. */ + iowrite32(BRIDGE_INT_FPGA, bridge + BRIDGE_INT_MASK_REG); + + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +static void poch_class_dev_unregister(struct poch_dev *poch_dev, int id) +{ + int i, j; + int nattrs; + struct channel_info *channel; + dev_t devno; + + if (poch_dev->dev == NULL) + return; + + for (i = 0; i < poch_dev->nchannels; i++) { + channel = &poch_dev->channels[i]; + devno = poch_first_dev + (id * poch_dev->nchannels) + i; + + if (!channel->dev) + continue; + + nattrs = sizeof(poch_class_attrs)/sizeof(poch_class_attrs[0]); + for (j = 0; j < nattrs; j++) + device_remove_file(channel->dev, poch_class_attrs[j]); + + device_unregister(channel->dev); + } + + device_unregister(poch_dev->dev); +} + +static int __devinit poch_class_dev_register(struct poch_dev *poch_dev, + int id) +{ + struct device *dev = &poch_dev->pci_dev->dev; + int i, j; + int nattrs; + int ret; + struct channel_info *channel; + dev_t devno; + + poch_dev->dev = device_create(poch_cls, &poch_dev->pci_dev->dev, + MKDEV(0, 0), NULL, "poch%d", id); + if (IS_ERR(poch_dev->dev)) { + dev_err(dev, "error creating parent class device"); + ret = PTR_ERR(poch_dev->dev); + poch_dev->dev = NULL; + return ret; + } + + for (i = 0; i < poch_dev->nchannels; i++) { + channel = &poch_dev->channels[i]; + + devno = poch_first_dev + (id * poch_dev->nchannels) + i; + channel->dev = device_create(poch_cls, poch_dev->dev, devno, + NULL, "ch%d", i); + if (IS_ERR(channel->dev)) { + dev_err(dev, "error creating channel class device"); + ret = PTR_ERR(channel->dev); + channel->dev = NULL; + poch_class_dev_unregister(poch_dev, id); + return ret; + } + + dev_set_drvdata(channel->dev, channel); + nattrs = sizeof(poch_class_attrs)/sizeof(poch_class_attrs[0]); + for (j = 0; j < nattrs; j++) { + ret = device_create_file(channel->dev, + poch_class_attrs[j]); + if (ret) { + dev_err(dev, "error creating attribute file"); + poch_class_dev_unregister(poch_dev, id); + return ret; + } + } + } + + return 0; +} + +static int __devinit poch_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *pci_id) +{ + struct device *dev = &pdev->dev; + struct poch_dev *poch_dev; + struct uio_info *uio; + int ret; + int id; + int i; + + poch_dev = kzalloc(sizeof(struct poch_dev), GFP_KERNEL); + if (!poch_dev) { + dev_err(dev, "error allocating priv. data memory\n"); + return -ENOMEM; + } + + poch_dev->pci_dev = pdev; + uio = &poch_dev->uio; + + pci_set_drvdata(pdev, poch_dev); + + spin_lock_init(&poch_dev->iomem_lock); + + poch_dev->nchannels = POCH_NCHANNELS; + poch_dev->channels[CHNO_RX_CHANNEL].dir = CHANNEL_DIR_RX; + poch_dev->channels[CHNO_TX_CHANNEL].dir = CHANNEL_DIR_TX; + + for (i = 0; i < poch_dev->nchannels; i++) { + init_waitqueue_head(&poch_dev->channels[i].wq); + atomic_set(&poch_dev->channels[i].free, 1); + atomic_set(&poch_dev->channels[i].inited, 0); + } + + ret = pci_enable_device(pdev); + if (ret) { + dev_err(dev, "error enabling device\n"); + goto out_free; + } + + ret = pci_request_regions(pdev, "poch"); + if (ret) { + dev_err(dev, "error requesting resources\n"); + goto out_disable; + } + + uio->mem[0].addr = pci_resource_start(pdev, 1); + if (!uio->mem[0].addr) { + dev_err(dev, "invalid BAR1\n"); + ret = -ENODEV; + goto out_release; + } + + uio->mem[0].size = pci_resource_len(pdev, 1); + uio->mem[0].memtype = UIO_MEM_PHYS; + + uio->name = "poch"; + uio->version = "0.0.1"; + uio->irq = -1; + ret = uio_register_device(dev, uio); + if (ret) { + dev_err(dev, "error register UIO device: %d\n", ret); + goto out_release; + } + + poch_dev->bridge_iomem = ioremap(pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (poch_dev->bridge_iomem == NULL) { + dev_err(dev, "error mapping bridge (bar0) registers\n"); + ret = -ENOMEM; + goto out_uio_unreg; + } + + poch_dev->fpga_iomem = ioremap(pci_resource_start(pdev, 1), + pci_resource_len(pdev, 1)); + if (poch_dev->fpga_iomem == NULL) { + dev_err(dev, "error mapping fpga (bar1) registers\n"); + ret = -ENOMEM; + goto out_bar0_unmap; + } + + ret = request_irq(pdev->irq, poch_irq_handler, IRQF_SHARED, + dev->bus_id, poch_dev); + if (ret) { + dev_err(dev, "error requesting IRQ %u\n", pdev->irq); + ret = -ENOMEM; + goto out_bar1_unmap; + } + + if (!idr_pre_get(&poch_ids, GFP_KERNEL)) { + dev_err(dev, "error allocating memory ids\n"); + ret = -ENOMEM; + goto out_free_irq; + } + + idr_get_new(&poch_ids, poch_dev, &id); + if (id >= MAX_POCH_CARDS) { + dev_err(dev, "minors exhausted\n"); + ret = -EBUSY; + goto out_free_irq; + } + + cdev_init(&poch_dev->cdev, &poch_fops); + poch_dev->cdev.owner = THIS_MODULE; + ret = cdev_add(&poch_dev->cdev, + poch_first_dev + (id * poch_dev->nchannels), + poch_dev->nchannels); + if (ret) { + dev_err(dev, "error register character device\n"); + goto out_idr_remove; + } + + ret = poch_class_dev_register(poch_dev, id); + if (ret) + goto out_cdev_del; + + return 0; + + out_cdev_del: + cdev_del(&poch_dev->cdev); + out_idr_remove: + idr_remove(&poch_ids, id); + out_free_irq: + free_irq(pdev->irq, poch_dev); + out_bar1_unmap: + iounmap(poch_dev->fpga_iomem); + out_bar0_unmap: + iounmap(poch_dev->bridge_iomem); + out_uio_unreg: + uio_unregister_device(uio); + out_release: + pci_release_regions(pdev); + out_disable: + pci_disable_device(pdev); + out_free: + kfree(poch_dev); + return ret; +} + +/* + * FIXME: We are yet to handle the hot unplug case. + */ +static void poch_pci_remove(struct pci_dev *pdev) +{ + struct poch_dev *poch_dev = pci_get_drvdata(pdev); + struct uio_info *uio = &poch_dev->uio; + unsigned int minor = MINOR(poch_dev->cdev.dev); + unsigned int id = minor / poch_dev->nchannels; + + /* FIXME: unmap fpga_iomem and bridge_iomem */ + + poch_class_dev_unregister(poch_dev, id); + cdev_del(&poch_dev->cdev); + idr_remove(&poch_ids, id); + free_irq(pdev->irq, poch_dev); + uio_unregister_device(uio); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + iounmap(uio->mem[0].internal_addr); + + kfree(poch_dev); +} + +static const struct pci_device_id poch_pci_ids[] /* __devinitconst */ = { + { PCI_DEVICE(PCI_VENDOR_ID_RRAPIDS, + PCI_DEVICE_ID_RRAPIDS_POCKET_CHANGE) }, + { 0, } +}; + +static struct pci_driver poch_pci_driver = { + .name = DRV_NAME, + .id_table = poch_pci_ids, + .probe = poch_pci_probe, + .remove = poch_pci_remove, +}; + +static int __init poch_init_module(void) +{ + int ret = 0; + + ret = alloc_chrdev_region(&poch_first_dev, 0, + MAX_POCH_DEVICES, DRV_NAME); + if (ret) { + printk(KERN_ERR PFX "error allocating device no."); + return ret; + } + + poch_cls = class_create(THIS_MODULE, "pocketchange"); + if (IS_ERR(poch_cls)) { + ret = PTR_ERR(poch_cls); + goto out_unreg_chrdev; + } + + ret = pci_register_driver(&poch_pci_driver); + if (ret) { + printk(KERN_ERR PFX "error register PCI device"); + goto out_class_destroy; + } + + return 0; + + out_class_destroy: + class_destroy(poch_cls); + + out_unreg_chrdev: + unregister_chrdev_region(poch_first_dev, MAX_POCH_DEVICES); + + return ret; +} + +static void __exit poch_exit_module(void) +{ + pci_unregister_driver(&poch_pci_driver); + class_destroy(poch_cls); + unregister_chrdev_region(poch_first_dev, MAX_POCH_DEVICES); +} + +module_init(poch_init_module); +module_exit(poch_exit_module); + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/staging/poch/poch.h b/drivers/staging/poch/poch.h new file mode 100644 index 000000000000..51a2d145798e --- /dev/null +++ b/drivers/staging/poch/poch.h @@ -0,0 +1,29 @@ +/* + * User-space DMA and UIO based Redrapids Pocket Change CardBus driver + * + * Copyright 2008 Vijay Kumar <vijaykumar@bravegnu.org> + * + * Part of userspace API. Should be moved to a header file in + * include/linux for final version. + * + */ +struct poch_cbuf_header { + __s32 group_size_bytes; + __s32 group_count; + __s32 group_offsets[0]; +}; + +struct poch_counters { + __u32 fifo_empty; + __u32 fifo_overflow; + __u32 pll_unlock; +}; + +#define POCH_IOC_NUM '9' + +#define POCH_IOC_TRANSFER_START _IO(POCH_IOC_NUM, 0) +#define POCH_IOC_TRANSFER_STOP _IO(POCH_IOC_NUM, 1) +#define POCH_IOC_GET_COUNTERS _IOR(POCH_IOC_NUM, 2, \ + struct poch_counters) +#define POCH_IOC_SYNC_GROUP_FOR_USER _IO(POCH_IOC_NUM, 3) +#define POCH_IOC_SYNC_GROUP_FOR_DEVICE _IO(POCH_IOC_NUM, 4) diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c index b61ac4b2db9e..8fa9490b3e2c 100644 --- a/drivers/staging/slicoss/slicoss.c +++ b/drivers/staging/slicoss/slicoss.c @@ -54,7 +54,6 @@ * IS-NIC driver. */ -#include <linux/version.h> #define SLIC_DUMP_ENABLED 0 #define KLUDGE_FOR_4GB_BOUNDARY 1 @@ -96,17 +95,9 @@ #include <linux/moduleparam.h> #include <linux/types.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/init.h> -#include <linux/pci.h> #include <linux/dma-mapping.h> -#include <linux/netdevice.h> -#include <linux/etherdevice.h> #include <linux/mii.h> #include <linux/if_vlan.h> -#include <linux/skbuff.h> -#include <linux/string.h> #include <asm/unaligned.h> #include <linux/ethtool.h> @@ -275,7 +266,6 @@ static void slic_dbg_register_trace(struct adapter *adapter, card->reg_value[i], card->reg_valueh[i]); } } -} #endif static void slic_init_adapter(struct net_device *netdev, @@ -606,6 +596,7 @@ static void __devexit slic_entry_remove(struct pci_dev *pcidev) uint mmio_len = 0; struct adapter *adapter = (struct adapter *) netdev_priv(dev); struct sliccard *card; + struct mcast_address *mcaddr, *mlist; ASSERT(adapter); DBG_MSG("slicoss: %s ENTER dev[%p] adapter[%p]\n", __func__, dev, @@ -625,6 +616,13 @@ static void __devexit slic_entry_remove(struct pci_dev *pcidev) DBG_MSG("slicoss: %s iounmap dev->base_addr[%x]\n", __func__, (uint) dev->base_addr); iounmap((void __iomem *)dev->base_addr); + /* free multicast addresses */ + mlist = adapter->mcastaddrs; + while (mlist) { + mcaddr = mlist; + mlist = mlist->next; + kfree(mcaddr); + } ASSERT(adapter->card); card = adapter->card; ASSERT(card->adapters_allocated); diff --git a/drivers/staging/sxg/README b/drivers/staging/sxg/README index 4d1ddbe4c335..d514d1848803 100644 --- a/drivers/staging/sxg/README +++ b/drivers/staging/sxg/README @@ -7,6 +7,7 @@ TODO: - remove wrappers - checkpatch.pl cleanups - new functionality that the card needs + - remove reliance on x86 Please send patches to: Greg Kroah-Hartman <gregkh@suse.de> diff --git a/drivers/staging/sxg/sxg.c b/drivers/staging/sxg/sxg.c index 6ccbee875ab3..5272a18e2043 100644 --- a/drivers/staging/sxg/sxg.c +++ b/drivers/staging/sxg/sxg.c @@ -112,12 +112,16 @@ static bool sxg_mac_filter(p_adapter_t adapter, static struct net_device_stats *sxg_get_stats(p_net_device dev); #endif +#define XXXTODO 0 + +#if XXXTODO static int sxg_mac_set_address(p_net_device dev, void *ptr); +static void sxg_mcast_set_list(p_net_device dev); +#endif static void sxg_adapter_set_hwaddr(p_adapter_t adapter); static void sxg_unmap_mmio_space(p_adapter_t adapter); -static void sxg_mcast_set_mask(p_adapter_t adapter); static int sxg_initialize_adapter(p_adapter_t adapter); static void sxg_stock_rcv_buffers(p_adapter_t adapter); @@ -132,9 +136,6 @@ static int sxg_write_mdio_reg(p_adapter_t adapter, u32 DevAddr, u32 RegAddr, u32 Value); static int sxg_read_mdio_reg(p_adapter_t adapter, u32 DevAddr, u32 RegAddr, u32 *pValue); -static void sxg_mcast_set_list(p_net_device dev); - -#define XXXTODO 0 static unsigned int sxg_first_init = 1; static char *sxg_banner = @@ -202,7 +203,7 @@ static void sxg_init_driver(void) { if (sxg_first_init) { DBG_ERROR("sxg: %s sxg_first_init set jiffies[%lx]\n", - __FUNCTION__, jiffies); + __func__, jiffies); sxg_first_init = 0; spin_lock_init(&sxg_global.driver_lock); } @@ -223,7 +224,7 @@ static void sxg_dbg_macaddrs(p_adapter_t adapter) return; } -// SXG Globals +/* SXG Globals */ static SXG_DRIVER SxgDriver; #ifdef ATKDBG @@ -250,7 +251,7 @@ static bool sxg_download_microcode(p_adapter_t adapter, SXG_UCODE_SEL UcodeSel) u32 ThisSectionSize; u32 *Instruction = NULL; u32 BaseAddress, AddressOffset, Address; -// u32 Failure; +/* u32 Failure; */ u32 ValueRead; u32 i; u32 numSections = 0; @@ -259,10 +260,10 @@ static bool sxg_download_microcode(p_adapter_t adapter, SXG_UCODE_SEL UcodeSel) SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DnldUcod", adapter, 0, 0, 0); - DBG_ERROR("sxg: %s ENTER\n", __FUNCTION__); + DBG_ERROR("sxg: %s ENTER\n", __func__); switch (UcodeSel) { - case SXG_UCODE_SAHARA: // Sahara operational ucode + case SXG_UCODE_SAHARA: /* Sahara operational ucode */ numSections = SNumSections; for (i = 0; i < numSections; i++) { sectionSize[i] = SSectionSize[i]; @@ -276,13 +277,13 @@ static bool sxg_download_microcode(p_adapter_t adapter, SXG_UCODE_SEL UcodeSel) } DBG_ERROR("sxg: RESET THE CARD\n"); - // First, reset the card + /* First, reset the card */ WRITE_REG(HwRegs->Reset, 0xDEAD, FLUSH); - // Download each section of the microcode as specified in - // its download file. The *download.c file is generated using - // the saharaobjtoc facility which converts the metastep .obj - // file to a .c file which contains a two dimentional array. + /* Download each section of the microcode as specified in */ + /* its download file. The *download.c file is generated using */ + /* the saharaobjtoc facility which converts the metastep .obj */ + /* file to a .c file which contains a two dimentional array. */ for (Section = 0; Section < numSections; Section++) { DBG_ERROR("sxg: SECTION # %d\n", Section); switch (UcodeSel) { @@ -294,35 +295,35 @@ static bool sxg_download_microcode(p_adapter_t adapter, SXG_UCODE_SEL UcodeSel) break; } BaseAddress = sectionStart[Section]; - ThisSectionSize = sectionSize[Section] / 12; // Size in instructions + ThisSectionSize = sectionSize[Section] / 12; /* Size in instructions */ for (AddressOffset = 0; AddressOffset < ThisSectionSize; AddressOffset++) { Address = BaseAddress + AddressOffset; ASSERT((Address & ~MICROCODE_ADDRESS_MASK) == 0); - // Write instruction bits 31 - 0 + /* Write instruction bits 31 - 0 */ WRITE_REG(HwRegs->UcodeDataLow, *Instruction, FLUSH); - // Write instruction bits 63-32 + /* Write instruction bits 63-32 */ WRITE_REG(HwRegs->UcodeDataMiddle, *(Instruction + 1), FLUSH); - // Write instruction bits 95-64 + /* Write instruction bits 95-64 */ WRITE_REG(HwRegs->UcodeDataHigh, *(Instruction + 2), FLUSH); - // Write instruction address with the WRITE bit set + /* Write instruction address with the WRITE bit set */ WRITE_REG(HwRegs->UcodeAddr, (Address | MICROCODE_ADDRESS_WRITE), FLUSH); - // Sahara bug in the ucode download logic - the write to DataLow - // for the next instruction could get corrupted. To avoid this, - // write to DataLow again for this instruction (which may get - // corrupted, but it doesn't matter), then increment the address - // and write the data for the next instruction to DataLow. That - // write should succeed. + /* Sahara bug in the ucode download logic - the write to DataLow */ + /* for the next instruction could get corrupted. To avoid this, */ + /* write to DataLow again for this instruction (which may get */ + /* corrupted, but it doesn't matter), then increment the address */ + /* and write the data for the next instruction to DataLow. That */ + /* write should succeed. */ WRITE_REG(HwRegs->UcodeDataLow, *Instruction, TRUE); - // Advance 3 u32S to start of next instruction + /* Advance 3 u32S to start of next instruction */ Instruction += 3; } } - // Now repeat the entire operation reading the instruction back and - // checking for parity errors + /* Now repeat the entire operation reading the instruction back and */ + /* checking for parity errors */ for (Section = 0; Section < numSections; Section++) { DBG_ERROR("sxg: check SECTION # %d\n", Section); switch (UcodeSel) { @@ -334,74 +335,74 @@ static bool sxg_download_microcode(p_adapter_t adapter, SXG_UCODE_SEL UcodeSel) break; } BaseAddress = sectionStart[Section]; - ThisSectionSize = sectionSize[Section] / 12; // Size in instructions + ThisSectionSize = sectionSize[Section] / 12; /* Size in instructions */ for (AddressOffset = 0; AddressOffset < ThisSectionSize; AddressOffset++) { Address = BaseAddress + AddressOffset; - // Write the address with the READ bit set + /* Write the address with the READ bit set */ WRITE_REG(HwRegs->UcodeAddr, (Address | MICROCODE_ADDRESS_READ), FLUSH); - // Read it back and check parity bit. + /* Read it back and check parity bit. */ READ_REG(HwRegs->UcodeAddr, ValueRead); if (ValueRead & MICROCODE_ADDRESS_PARITY) { DBG_ERROR("sxg: %s PARITY ERROR\n", - __FUNCTION__); + __func__); - return (FALSE); // Parity error + return (FALSE); /* Parity error */ } ASSERT((ValueRead & MICROCODE_ADDRESS_MASK) == Address); - // Read the instruction back and compare + /* Read the instruction back and compare */ READ_REG(HwRegs->UcodeDataLow, ValueRead); if (ValueRead != *Instruction) { DBG_ERROR("sxg: %s MISCOMPARE LOW\n", - __FUNCTION__); - return (FALSE); // Miscompare + __func__); + return (FALSE); /* Miscompare */ } READ_REG(HwRegs->UcodeDataMiddle, ValueRead); if (ValueRead != *(Instruction + 1)) { DBG_ERROR("sxg: %s MISCOMPARE MIDDLE\n", - __FUNCTION__); - return (FALSE); // Miscompare + __func__); + return (FALSE); /* Miscompare */ } READ_REG(HwRegs->UcodeDataHigh, ValueRead); if (ValueRead != *(Instruction + 2)) { DBG_ERROR("sxg: %s MISCOMPARE HIGH\n", - __FUNCTION__); - return (FALSE); // Miscompare + __func__); + return (FALSE); /* Miscompare */ } - // Advance 3 u32S to start of next instruction + /* Advance 3 u32S to start of next instruction */ Instruction += 3; } } - // Everything OK, Go. + /* Everything OK, Go. */ WRITE_REG(HwRegs->UcodeAddr, MICROCODE_ADDRESS_GO, FLUSH); - // Poll the CardUp register to wait for microcode to initialize - // Give up after 10,000 attemps (500ms). + /* Poll the CardUp register to wait for microcode to initialize */ + /* Give up after 10,000 attemps (500ms). */ for (i = 0; i < 10000; i++) { udelay(50); READ_REG(adapter->UcodeRegs[0].CardUp, ValueRead); if (ValueRead == 0xCAFE) { - DBG_ERROR("sxg: %s BOO YA 0xCAFE\n", __FUNCTION__); + DBG_ERROR("sxg: %s BOO YA 0xCAFE\n", __func__); break; } } if (i == 10000) { - DBG_ERROR("sxg: %s TIMEOUT\n", __FUNCTION__); + DBG_ERROR("sxg: %s TIMEOUT\n", __func__); - return (FALSE); // Timeout + return (FALSE); /* Timeout */ } - // Now write the LoadSync register. This is used to - // synchronize with the card so it can scribble on the memory - // that contained 0xCAFE from the "CardUp" step above + /* Now write the LoadSync register. This is used to */ + /* synchronize with the card so it can scribble on the memory */ + /* that contained 0xCAFE from the "CardUp" step above */ if (UcodeSel == SXG_UCODE_SAHARA) { WRITE_REG(adapter->UcodeRegs[0].LoadSync, 0, FLUSH); } SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XDnldUcd", adapter, 0, 0, 0); - DBG_ERROR("sxg: %s EXIT\n", __FUNCTION__); + DBG_ERROR("sxg: %s EXIT\n", __func__); return (TRUE); } @@ -420,29 +421,29 @@ static int sxg_allocate_resources(p_adapter_t adapter) int status; u32 i; u32 RssIds, IsrCount; -// PSXG_XMT_RING XmtRing; -// PSXG_RCV_RING RcvRing; +/* PSXG_XMT_RING XmtRing; */ +/* PSXG_RCV_RING RcvRing; */ - DBG_ERROR("%s ENTER\n", __FUNCTION__); + DBG_ERROR("%s ENTER\n", __func__); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "AllocRes", adapter, 0, 0, 0); - // Windows tells us how many CPUs it plans to use for - // RSS + /* Windows tells us how many CPUs it plans to use for */ + /* RSS */ RssIds = SXG_RSS_CPU_COUNT(adapter); IsrCount = adapter->MsiEnabled ? RssIds : 1; - DBG_ERROR("%s Setup the spinlocks\n", __FUNCTION__); + DBG_ERROR("%s Setup the spinlocks\n", __func__); - // Allocate spinlocks and initialize listheads first. + /* Allocate spinlocks and initialize listheads first. */ spin_lock_init(&adapter->RcvQLock); spin_lock_init(&adapter->SglQLock); spin_lock_init(&adapter->XmtZeroLock); spin_lock_init(&adapter->Bit64RegLock); spin_lock_init(&adapter->AdapterLock); - DBG_ERROR("%s Setup the lists\n", __FUNCTION__); + DBG_ERROR("%s Setup the lists\n", __func__); InitializeListHead(&adapter->FreeRcvBuffers); InitializeListHead(&adapter->FreeRcvBlocks); @@ -450,39 +451,39 @@ static int sxg_allocate_resources(p_adapter_t adapter) InitializeListHead(&adapter->FreeSglBuffers); InitializeListHead(&adapter->AllSglBuffers); - // Mark these basic allocations done. This flags essentially - // tells the SxgFreeResources routine that it can grab spinlocks - // and reference listheads. + /* Mark these basic allocations done. This flags essentially */ + /* tells the SxgFreeResources routine that it can grab spinlocks */ + /* and reference listheads. */ adapter->BasicAllocations = TRUE; - // Main allocation loop. Start with the maximum supported by - // the microcode and back off if memory allocation - // fails. If we hit a minimum, fail. + /* Main allocation loop. Start with the maximum supported by */ + /* the microcode and back off if memory allocation */ + /* fails. If we hit a minimum, fail. */ for (;;) { - DBG_ERROR("%s Allocate XmtRings size[%lx]\n", __FUNCTION__, - (sizeof(SXG_XMT_RING) * 1)); + DBG_ERROR("%s Allocate XmtRings size[%x]\n", __func__, + (unsigned int)(sizeof(SXG_XMT_RING) * 1)); - // Start with big items first - receive and transmit rings. At the moment - // I'm going to keep the ring size fixed and adjust the number of - // TCBs if we fail. Later we might consider reducing the ring size as well.. + /* Start with big items first - receive and transmit rings. At the moment */ + /* I'm going to keep the ring size fixed and adjust the number of */ + /* TCBs if we fail. Later we might consider reducing the ring size as well.. */ adapter->XmtRings = pci_alloc_consistent(adapter->pcidev, sizeof(SXG_XMT_RING) * 1, &adapter->PXmtRings); - DBG_ERROR("%s XmtRings[%p]\n", __FUNCTION__, adapter->XmtRings); + DBG_ERROR("%s XmtRings[%p]\n", __func__, adapter->XmtRings); if (!adapter->XmtRings) { goto per_tcb_allocation_failed; } memset(adapter->XmtRings, 0, sizeof(SXG_XMT_RING) * 1); - DBG_ERROR("%s Allocate RcvRings size[%lx]\n", __FUNCTION__, - (sizeof(SXG_RCV_RING) * 1)); + DBG_ERROR("%s Allocate RcvRings size[%x]\n", __func__, + (unsigned int)(sizeof(SXG_RCV_RING) * 1)); adapter->RcvRings = pci_alloc_consistent(adapter->pcidev, sizeof(SXG_RCV_RING) * 1, &adapter->PRcvRings); - DBG_ERROR("%s RcvRings[%p]\n", __FUNCTION__, adapter->RcvRings); + DBG_ERROR("%s RcvRings[%p]\n", __func__, adapter->RcvRings); if (!adapter->RcvRings) { goto per_tcb_allocation_failed; } @@ -490,7 +491,7 @@ static int sxg_allocate_resources(p_adapter_t adapter) break; per_tcb_allocation_failed: - // an allocation failed. Free any successful allocations. + /* an allocation failed. Free any successful allocations. */ if (adapter->XmtRings) { pci_free_consistent(adapter->pcidev, sizeof(SXG_XMT_RING) * 4096, @@ -505,22 +506,22 @@ static int sxg_allocate_resources(p_adapter_t adapter) adapter->PRcvRings); adapter->RcvRings = NULL; } - // Loop around and try again.... + /* Loop around and try again.... */ } - DBG_ERROR("%s Initialize RCV ZERO and XMT ZERO rings\n", __FUNCTION__); - // Initialize rcv zero and xmt zero rings + DBG_ERROR("%s Initialize RCV ZERO and XMT ZERO rings\n", __func__); + /* Initialize rcv zero and xmt zero rings */ SXG_INITIALIZE_RING(adapter->RcvRingZeroInfo, SXG_RCV_RING_SIZE); SXG_INITIALIZE_RING(adapter->XmtRingZeroInfo, SXG_XMT_RING_SIZE); - // Sanity check receive data structure format + /* Sanity check receive data structure format */ ASSERT((adapter->ReceiveBufferSize == SXG_RCV_DATA_BUFFER_SIZE) || (adapter->ReceiveBufferSize == SXG_RCV_JUMBO_BUFFER_SIZE)); ASSERT(sizeof(SXG_RCV_DESCRIPTOR_BLOCK) == SXG_RCV_DESCRIPTOR_BLOCK_SIZE); - // Allocate receive data buffers. We allocate a block of buffers and - // a corresponding descriptor block at once. See sxghw.h:SXG_RCV_BLOCK + /* Allocate receive data buffers. We allocate a block of buffers and */ + /* a corresponding descriptor block at once. See sxghw.h:SXG_RCV_BLOCK */ for (i = 0; i < SXG_INITIAL_RCV_DATA_BUFFERS; i += SXG_RCV_DESCRIPTORS_PER_BLOCK) { sxg_allocate_buffer_memory(adapter, @@ -528,8 +529,8 @@ static int sxg_allocate_resources(p_adapter_t adapter) ReceiveBufferSize), SXG_BUFFER_TYPE_RCV); } - // NBL resource allocation can fail in the 'AllocateComplete' routine, which - // doesn't return status. Make sure we got the number of buffers we requested + /* NBL resource allocation can fail in the 'AllocateComplete' routine, which */ + /* doesn't return status. Make sure we got the number of buffers we requested */ if (adapter->FreeRcvBufferCount < SXG_INITIAL_RCV_DATA_BUFFERS) { SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XAResF6", adapter, adapter->FreeRcvBufferCount, SXG_MAX_ENTRIES, @@ -537,17 +538,17 @@ static int sxg_allocate_resources(p_adapter_t adapter) return (STATUS_RESOURCES); } - DBG_ERROR("%s Allocate EventRings size[%lx]\n", __FUNCTION__, - (sizeof(SXG_EVENT_RING) * RssIds)); + DBG_ERROR("%s Allocate EventRings size[%x]\n", __func__, + (unsigned int)(sizeof(SXG_EVENT_RING) * RssIds)); - // Allocate event queues. + /* Allocate event queues. */ adapter->EventRings = pci_alloc_consistent(adapter->pcidev, sizeof(SXG_EVENT_RING) * RssIds, &adapter->PEventRings); if (!adapter->EventRings) { - // Caller will call SxgFreeAdapter to clean up above allocations + /* Caller will call SxgFreeAdapter to clean up above allocations */ SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XAResF8", adapter, SXG_MAX_ENTRIES, 0, 0); status = STATUS_RESOURCES; @@ -555,12 +556,12 @@ static int sxg_allocate_resources(p_adapter_t adapter) } memset(adapter->EventRings, 0, sizeof(SXG_EVENT_RING) * RssIds); - DBG_ERROR("%s Allocate ISR size[%x]\n", __FUNCTION__, IsrCount); - // Allocate ISR + DBG_ERROR("%s Allocate ISR size[%x]\n", __func__, IsrCount); + /* Allocate ISR */ adapter->Isr = pci_alloc_consistent(adapter->pcidev, IsrCount, &adapter->PIsr); if (!adapter->Isr) { - // Caller will call SxgFreeAdapter to clean up above allocations + /* Caller will call SxgFreeAdapter to clean up above allocations */ SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XAResF9", adapter, SXG_MAX_ENTRIES, 0, 0); status = STATUS_RESOURCES; @@ -568,10 +569,10 @@ static int sxg_allocate_resources(p_adapter_t adapter) } memset(adapter->Isr, 0, sizeof(u32) * IsrCount); - DBG_ERROR("%s Allocate shared XMT ring zero index location size[%lx]\n", - __FUNCTION__, sizeof(u32)); + DBG_ERROR("%s Allocate shared XMT ring zero index location size[%x]\n", + __func__, (unsigned int)sizeof(u32)); - // Allocate shared XMT ring zero index location + /* Allocate shared XMT ring zero index location */ adapter->XmtRingZeroIndex = pci_alloc_consistent(adapter->pcidev, sizeof(u32), &adapter-> @@ -587,7 +588,7 @@ static int sxg_allocate_resources(p_adapter_t adapter) SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XAlcResS", adapter, SXG_MAX_ENTRIES, 0, 0); - DBG_ERROR("%s EXIT\n", __FUNCTION__); + DBG_ERROR("%s EXIT\n", __func__); return (STATUS_SUCCESS); } @@ -606,17 +607,17 @@ static void sxg_config_pci(struct pci_dev *pcidev) u16 new_command; pci_read_config_word(pcidev, PCI_COMMAND, &pci_command); - DBG_ERROR("sxg: %s PCI command[%4.4x]\n", __FUNCTION__, pci_command); - // Set the command register - new_command = pci_command | (PCI_COMMAND_MEMORY | // Memory Space Enable - PCI_COMMAND_MASTER | // Bus master enable - PCI_COMMAND_INVALIDATE | // Memory write and invalidate - PCI_COMMAND_PARITY | // Parity error response - PCI_COMMAND_SERR | // System ERR - PCI_COMMAND_FAST_BACK); // Fast back-to-back + DBG_ERROR("sxg: %s PCI command[%4.4x]\n", __func__, pci_command); + /* Set the command register */ + new_command = pci_command | (PCI_COMMAND_MEMORY | /* Memory Space Enable */ + PCI_COMMAND_MASTER | /* Bus master enable */ + PCI_COMMAND_INVALIDATE | /* Memory write and invalidate */ + PCI_COMMAND_PARITY | /* Parity error response */ + PCI_COMMAND_SERR | /* System ERR */ + PCI_COMMAND_FAST_BACK); /* Fast back-to-back */ if (pci_command != new_command) { DBG_ERROR("%s -- Updating PCI COMMAND register %4.4x->%4.4x.\n", - __FUNCTION__, pci_command, new_command); + __func__, pci_command, new_command); pci_write_config_word(pcidev, PCI_COMMAND, new_command); } } @@ -634,9 +635,9 @@ static int sxg_entry_probe(struct pci_dev *pcidev, ulong mmio_len = 0; DBG_ERROR("sxg: %s 2.6 VERSION ENTER jiffies[%lx] cpu %d\n", - __FUNCTION__, jiffies, smp_processor_id()); + __func__, jiffies, smp_processor_id()); - // Initialize trace buffer + /* Initialize trace buffer */ #ifdef ATKDBG SxgTraceBuffer = &LSxgTraceBuffer; SXG_TRACE_INIT(SxgTraceBuffer, TRACE_NOISY); @@ -701,11 +702,11 @@ static int sxg_entry_probe(struct pci_dev *pcidev, mmio_start, mmio_len); memmapped_ioaddr = ioremap(mmio_start, mmio_len); - DBG_ERROR("sxg: %s MEMMAPPED_IOADDR [%p]\n", __FUNCTION__, + DBG_ERROR("sxg: %s MEMMAPPED_IOADDR [%p]\n", __func__, memmapped_ioaddr); if (!memmapped_ioaddr) { DBG_ERROR("%s cannot remap MMIO region %lx @ %lx\n", - __FUNCTION__, mmio_len, mmio_start); + __func__, mmio_len, mmio_start); goto err_out_free_mmio_region; } @@ -727,7 +728,7 @@ static int sxg_entry_probe(struct pci_dev *pcidev, memmapped_ioaddr); if (!memmapped_ioaddr) { DBG_ERROR("%s cannot remap MMIO region %lx @ %lx\n", - __FUNCTION__, mmio_len, mmio_start); + __func__, mmio_len, mmio_start); goto err_out_free_mmio_region; } @@ -738,13 +739,13 @@ static int sxg_entry_probe(struct pci_dev *pcidev, adapter->UcodeRegs = (void *)memmapped_ioaddr; adapter->State = SXG_STATE_INITIALIZING; - // Maintain a list of all adapters anchored by - // the global SxgDriver structure. + /* Maintain a list of all adapters anchored by */ + /* the global SxgDriver structure. */ adapter->Next = SxgDriver.Adapters; SxgDriver.Adapters = adapter; adapter->AdapterID = ++SxgDriver.AdapterID; - // Initialize CRC table used to determine multicast hash + /* Initialize CRC table used to determine multicast hash */ sxg_mcast_init_crc32(); adapter->JumboEnabled = FALSE; @@ -757,18 +758,18 @@ static int sxg_entry_probe(struct pci_dev *pcidev, adapter->ReceiveBufferSize = SXG_RCV_DATA_BUFFER_SIZE; } -// status = SXG_READ_EEPROM(adapter); -// if (!status) { -// goto sxg_init_bad; -// } +/* status = SXG_READ_EEPROM(adapter); */ +/* if (!status) { */ +/* goto sxg_init_bad; */ +/* } */ - DBG_ERROR("sxg: %s ENTER sxg_config_pci\n", __FUNCTION__); + DBG_ERROR("sxg: %s ENTER sxg_config_pci\n", __func__); sxg_config_pci(pcidev); - DBG_ERROR("sxg: %s EXIT sxg_config_pci\n", __FUNCTION__); + DBG_ERROR("sxg: %s EXIT sxg_config_pci\n", __func__); - DBG_ERROR("sxg: %s ENTER sxg_init_driver\n", __FUNCTION__); + DBG_ERROR("sxg: %s ENTER sxg_init_driver\n", __func__); sxg_init_driver(); - DBG_ERROR("sxg: %s EXIT sxg_init_driver\n", __FUNCTION__); + DBG_ERROR("sxg: %s EXIT sxg_init_driver\n", __func__); adapter->vendid = pci_tbl_entry->vendor; adapter->devid = pci_tbl_entry->device; @@ -780,23 +781,23 @@ static int sxg_entry_probe(struct pci_dev *pcidev, adapter->irq = pcidev->irq; adapter->next_netdevice = head_netdevice; head_netdevice = netdev; -// adapter->chipid = chip_idx; - adapter->port = 0; //adapter->functionnumber; +/* adapter->chipid = chip_idx; */ + adapter->port = 0; /*adapter->functionnumber; */ adapter->cardindex = adapter->port; - // Allocate memory and other resources - DBG_ERROR("sxg: %s ENTER sxg_allocate_resources\n", __FUNCTION__); + /* Allocate memory and other resources */ + DBG_ERROR("sxg: %s ENTER sxg_allocate_resources\n", __func__); status = sxg_allocate_resources(adapter); DBG_ERROR("sxg: %s EXIT sxg_allocate_resources status %x\n", - __FUNCTION__, status); + __func__, status); if (status != STATUS_SUCCESS) { goto err_out_unmap; } - DBG_ERROR("sxg: %s ENTER sxg_download_microcode\n", __FUNCTION__); + DBG_ERROR("sxg: %s ENTER sxg_download_microcode\n", __func__); if (sxg_download_microcode(adapter, SXG_UCODE_SAHARA)) { DBG_ERROR("sxg: %s ENTER sxg_adapter_set_hwaddr\n", - __FUNCTION__); + __func__); sxg_adapter_set_hwaddr(adapter); } else { adapter->state = ADAPT_FAIL; @@ -819,7 +820,7 @@ static int sxg_entry_probe(struct pci_dev *pcidev, #endif strcpy(netdev->name, "eth%d"); -// strcpy(netdev->name, pci_name(pcidev)); +/* strcpy(netdev->name, pci_name(pcidev)); */ if ((err = register_netdev(netdev))) { DBG_ERROR("Cannot register net device, aborting. %s\n", netdev->name); @@ -832,11 +833,11 @@ static int sxg_entry_probe(struct pci_dev *pcidev, netdev->dev_addr[1], netdev->dev_addr[2], netdev->dev_addr[3], netdev->dev_addr[4], netdev->dev_addr[5]); -//sxg_init_bad: +/*sxg_init_bad: */ ASSERT(status == FALSE); -// sxg_free_adapter(adapter); +/* sxg_free_adapter(adapter); */ - DBG_ERROR("sxg: %s EXIT status[%x] jiffies[%lx] cpu %d\n", __FUNCTION__, + DBG_ERROR("sxg: %s EXIT status[%x] jiffies[%lx] cpu %d\n", __func__, status, jiffies, smp_processor_id()); return status; @@ -848,7 +849,7 @@ static int sxg_entry_probe(struct pci_dev *pcidev, err_out_exit_sxg_probe: - DBG_ERROR("%s EXIT jiffies[%lx] cpu %d\n", __FUNCTION__, jiffies, + DBG_ERROR("%s EXIT jiffies[%lx] cpu %d\n", __func__, jiffies, smp_processor_id()); return -ENODEV; @@ -874,12 +875,12 @@ static void sxg_disable_interrupt(p_adapter_t adapter) { SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DisIntr", adapter, adapter->InterruptsEnabled, 0, 0); - // For now, RSS is disabled with line based interrupts + /* For now, RSS is disabled with line based interrupts */ ASSERT(adapter->RssEnabled == FALSE); ASSERT(adapter->MsiEnabled == FALSE); - // - // Turn off interrupts by writing to the icr register. - // + /* */ + /* Turn off interrupts by writing to the icr register. */ + /* */ WRITE_REG(adapter->UcodeRegs[0].Icr, SXG_ICR(0, SXG_ICR_DISABLE), TRUE); adapter->InterruptsEnabled = 0; @@ -905,12 +906,12 @@ static void sxg_enable_interrupt(p_adapter_t adapter) { SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "EnIntr", adapter, adapter->InterruptsEnabled, 0, 0); - // For now, RSS is disabled with line based interrupts + /* For now, RSS is disabled with line based interrupts */ ASSERT(adapter->RssEnabled == FALSE); ASSERT(adapter->MsiEnabled == FALSE); - // - // Turn on interrupts by writing to the icr register. - // + /* */ + /* Turn on interrupts by writing to the icr register. */ + /* */ WRITE_REG(adapter->UcodeRegs[0].Icr, SXG_ICR(0, SXG_ICR_ENABLE), TRUE); adapter->InterruptsEnabled = 1; @@ -935,29 +936,29 @@ static irqreturn_t sxg_isr(int irq, void *dev_id) { p_net_device dev = (p_net_device) dev_id; p_adapter_t adapter = (p_adapter_t) netdev_priv(dev); -// u32 CpuMask = 0, i; +/* u32 CpuMask = 0, i; */ adapter->Stats.NumInts++; if (adapter->Isr[0] == 0) { - // The SLIC driver used to experience a number of spurious interrupts - // due to the delay associated with the masking of the interrupt - // (we'd bounce back in here). If we see that again with Sahara, - // add a READ_REG of the Icr register after the WRITE_REG below. + /* The SLIC driver used to experience a number of spurious interrupts */ + /* due to the delay associated with the masking of the interrupt */ + /* (we'd bounce back in here). If we see that again with Sahara, */ + /* add a READ_REG of the Icr register after the WRITE_REG below. */ adapter->Stats.FalseInts++; return IRQ_NONE; } - // - // Move the Isr contents and clear the value in - // shared memory, and mask interrupts - // + /* */ + /* Move the Isr contents and clear the value in */ + /* shared memory, and mask interrupts */ + /* */ adapter->IsrCopy[0] = adapter->Isr[0]; adapter->Isr[0] = 0; WRITE_REG(adapter->UcodeRegs[0].Icr, SXG_ICR(0, SXG_ICR_MASK), TRUE); -// ASSERT(adapter->IsrDpcsPending == 0); -#if XXXTODO // RSS Stuff - // If RSS is enabled and the ISR specifies - // SXG_ISR_EVENT, then schedule DPC's - // based on event queues. +/* ASSERT(adapter->IsrDpcsPending == 0); */ +#if XXXTODO /* RSS Stuff */ + /* If RSS is enabled and the ISR specifies */ + /* SXG_ISR_EVENT, then schedule DPC's */ + /* based on event queues. */ if (adapter->RssEnabled && (adapter->IsrCopy[0] & SXG_ISR_EVENT)) { for (i = 0; i < adapter->RssSystemInfo->ProcessorInfo.RssCpuCount; @@ -973,8 +974,8 @@ static irqreturn_t sxg_isr(int irq, void *dev_id) } } } - // Now, either schedule the CPUs specified by the CpuMask, - // or queue default + /* Now, either schedule the CPUs specified by the CpuMask, */ + /* or queue default */ if (CpuMask) { *QueueDefault = FALSE; } else { @@ -983,9 +984,9 @@ static irqreturn_t sxg_isr(int irq, void *dev_id) } *TargetCpus = CpuMask; #endif - // - // There are no DPCs in Linux, so call the handler now - // + /* */ + /* There are no DPCs in Linux, so call the handler now */ + /* */ sxg_handle_interrupt(adapter); return IRQ_HANDLED; @@ -993,7 +994,7 @@ static irqreturn_t sxg_isr(int irq, void *dev_id) static void sxg_handle_interrupt(p_adapter_t adapter) { -// unsigned char RssId = 0; +/* unsigned char RssId = 0; */ u32 NewIsr; if (adapter->Stats.RcvNoBuffer < 5) { @@ -1002,32 +1003,32 @@ static void sxg_handle_interrupt(p_adapter_t adapter) } SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "HndlIntr", adapter, adapter->IsrCopy[0], 0, 0); - // For now, RSS is disabled with line based interrupts + /* For now, RSS is disabled with line based interrupts */ ASSERT(adapter->RssEnabled == FALSE); ASSERT(adapter->MsiEnabled == FALSE); ASSERT(adapter->IsrCopy[0]); -///////////////////////////// +/*/////////////////////////// */ - // Always process the event queue. + /* Always process the event queue. */ sxg_process_event_queue(adapter, (adapter->RssEnabled ? /*RssId */ 0 : 0)); -#if XXXTODO // RSS stuff +#if XXXTODO /* RSS stuff */ if (--adapter->IsrDpcsPending) { - // We're done. + /* We're done. */ ASSERT(adapter->RssEnabled); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DPCsPend", adapter, 0, 0, 0); return; } #endif - // - // Last (or only) DPC processes the ISR and clears the interrupt. - // + /* */ + /* Last (or only) DPC processes the ISR and clears the interrupt. */ + /* */ NewIsr = sxg_process_isr(adapter, 0); - // - // Reenable interrupts - // + /* */ + /* Reenable interrupts */ + /* */ adapter->IsrCopy[0] = 0; SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "ClearIsr", adapter, NewIsr, 0, 0); @@ -1063,75 +1064,75 @@ static int sxg_process_isr(p_adapter_t adapter, u32 MessageId) SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "ProcIsr", adapter, Isr, 0, 0); - // Error + /* Error */ if (Isr & SXG_ISR_ERR) { if (Isr & SXG_ISR_PDQF) { adapter->Stats.PdqFull++; - DBG_ERROR("%s: SXG_ISR_ERR PDQF!!\n", __FUNCTION__); + DBG_ERROR("%s: SXG_ISR_ERR PDQF!!\n", __func__); } - // No host buffer + /* No host buffer */ if (Isr & SXG_ISR_RMISS) { - // There is a bunch of code in the SLIC driver which - // attempts to process more receive events per DPC - // if we start to fall behind. We'll probably - // need to do something similar here, but hold - // off for now. I don't want to make the code more - // complicated than strictly needed. + /* There is a bunch of code in the SLIC driver which */ + /* attempts to process more receive events per DPC */ + /* if we start to fall behind. We'll probably */ + /* need to do something similar here, but hold */ + /* off for now. I don't want to make the code more */ + /* complicated than strictly needed. */ adapter->Stats.RcvNoBuffer++; if (adapter->Stats.RcvNoBuffer < 5) { DBG_ERROR("%s: SXG_ISR_ERR RMISS!!\n", - __FUNCTION__); + __func__); } } - // Card crash + /* Card crash */ if (Isr & SXG_ISR_DEAD) { - // Set aside the crash info and set the adapter state to RESET + /* Set aside the crash info and set the adapter state to RESET */ adapter->CrashCpu = (unsigned char)((Isr & SXG_ISR_CPU) >> SXG_ISR_CPU_SHIFT); adapter->CrashLocation = (ushort) (Isr & SXG_ISR_CRASH); adapter->Dead = TRUE; - DBG_ERROR("%s: ISR_DEAD %x, CPU: %d\n", __FUNCTION__, + DBG_ERROR("%s: ISR_DEAD %x, CPU: %d\n", __func__, adapter->CrashLocation, adapter->CrashCpu); } - // Event ring full + /* Event ring full */ if (Isr & SXG_ISR_ERFULL) { - // Same issue as RMISS, really. This means the - // host is falling behind the card. Need to increase - // event ring size, process more events per interrupt, - // and/or reduce/remove interrupt aggregation. + /* Same issue as RMISS, really. This means the */ + /* host is falling behind the card. Need to increase */ + /* event ring size, process more events per interrupt, */ + /* and/or reduce/remove interrupt aggregation. */ adapter->Stats.EventRingFull++; DBG_ERROR("%s: SXG_ISR_ERR EVENT RING FULL!!\n", - __FUNCTION__); + __func__); } - // Transmit drop - no DRAM buffers or XMT error + /* Transmit drop - no DRAM buffers or XMT error */ if (Isr & SXG_ISR_XDROP) { adapter->Stats.XmtDrops++; adapter->Stats.XmtErrors++; - DBG_ERROR("%s: SXG_ISR_ERR XDROP!!\n", __FUNCTION__); + DBG_ERROR("%s: SXG_ISR_ERR XDROP!!\n", __func__); } } - // Slowpath send completions + /* Slowpath send completions */ if (Isr & SXG_ISR_SPSEND) { sxg_complete_slow_send(adapter); } - // Dump + /* Dump */ if (Isr & SXG_ISR_UPC) { - ASSERT(adapter->DumpCmdRunning); // Maybe change when debug is added.. + ASSERT(adapter->DumpCmdRunning); /* Maybe change when debug is added.. */ adapter->DumpCmdRunning = FALSE; } - // Link event + /* Link event */ if (Isr & SXG_ISR_LINK) { sxg_link_event(adapter); } - // Debug - breakpoint hit + /* Debug - breakpoint hit */ if (Isr & SXG_ISR_BREAK) { - // At the moment AGDB isn't written to support interactive - // debug sessions. When it is, this interrupt will be used - // to signal AGDB that it has hit a breakpoint. For now, ASSERT. + /* At the moment AGDB isn't written to support interactive */ + /* debug sessions. When it is, this interrupt will be used */ + /* to signal AGDB that it has hit a breakpoint. For now, ASSERT. */ ASSERT(0); } - // Heartbeat response + /* Heartbeat response */ if (Isr & SXG_ISR_PING) { adapter->PingOutstanding = FALSE; } @@ -1171,39 +1172,39 @@ static u32 sxg_process_event_queue(p_adapter_t adapter, u32 RssId) (adapter->State == SXG_STATE_PAUSING) || (adapter->State == SXG_STATE_PAUSED) || (adapter->State == SXG_STATE_HALTING)); - // We may still have unprocessed events on the queue if - // the card crashed. Don't process them. + /* We may still have unprocessed events on the queue if */ + /* the card crashed. Don't process them. */ if (adapter->Dead) { return (0); } - // In theory there should only be a single processor that - // accesses this queue, and only at interrupt-DPC time. So - // we shouldn't need a lock for any of this. + /* In theory there should only be a single processor that */ + /* accesses this queue, and only at interrupt-DPC time. So */ + /* we shouldn't need a lock for any of this. */ while (Event->Status & EVENT_STATUS_VALID) { SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "Event", Event, Event->Code, Event->Status, adapter->NextEvent); switch (Event->Code) { case EVENT_CODE_BUFFERS: - ASSERT(!(Event->CommandIndex & 0xFF00)); // SXG_RING_INFO Head & Tail == unsigned char - // + ASSERT(!(Event->CommandIndex & 0xFF00)); /* SXG_RING_INFO Head & Tail == unsigned char */ + /* */ sxg_complete_descriptor_blocks(adapter, Event->CommandIndex); - // + /* */ break; case EVENT_CODE_SLOWRCV: --adapter->RcvBuffersOnCard; if ((skb = sxg_slow_receive(adapter, Event))) { u32 rx_bytes; #ifdef LINUX_HANDLES_RCV_INDICATION_LISTS - // Add it to our indication list + /* Add it to our indication list */ SXG_ADD_RCV_PACKET(adapter, skb, prev_skb, IndicationList, num_skbs); - // In Linux, we just pass up each skb to the protocol above at this point, - // there is no capability of an indication list. + /* In Linux, we just pass up each skb to the protocol above at this point, */ + /* there is no capability of an indication list. */ #else -// CHECK skb_pull(skb, INIC_RCVBUF_HEADSIZE); - rx_bytes = Event->Length; // (rcvbuf->length & IRHDDR_FLEN_MSK); +/* CHECK skb_pull(skb, INIC_RCVBUF_HEADSIZE); */ + rx_bytes = Event->Length; /* (rcvbuf->length & IRHDDR_FLEN_MSK); */ skb_put(skb, rx_bytes); adapter->stats.rx_packets++; adapter->stats.rx_bytes += rx_bytes; @@ -1218,43 +1219,43 @@ static u32 sxg_process_event_queue(p_adapter_t adapter, u32 RssId) break; default: DBG_ERROR("%s: ERROR Invalid EventCode %d\n", - __FUNCTION__, Event->Code); -// ASSERT(0); + __func__, Event->Code); +/* ASSERT(0); */ } - // See if we need to restock card receive buffers. - // There are two things to note here: - // First - This test is not SMP safe. The - // adapter->BuffersOnCard field is protected via atomic interlocked calls, but - // we do not protect it with respect to these tests. The only way to do that - // is with a lock, and I don't want to grab a lock every time we adjust the - // BuffersOnCard count. Instead, we allow the buffer replenishment to be off - // once in a while. The worst that can happen is the card is given one - // more-or-less descriptor block than the arbitrary value we've chosen. - // No big deal - // In short DO NOT ADD A LOCK HERE, OR WHERE RcvBuffersOnCard is adjusted. - // Second - We expect this test to rarely evaluate to true. We attempt to - // refill descriptor blocks as they are returned to us - // (sxg_complete_descriptor_blocks), so The only time this should evaluate - // to true is when sxg_complete_descriptor_blocks failed to allocate - // receive buffers. + /* See if we need to restock card receive buffers. */ + /* There are two things to note here: */ + /* First - This test is not SMP safe. The */ + /* adapter->BuffersOnCard field is protected via atomic interlocked calls, but */ + /* we do not protect it with respect to these tests. The only way to do that */ + /* is with a lock, and I don't want to grab a lock every time we adjust the */ + /* BuffersOnCard count. Instead, we allow the buffer replenishment to be off */ + /* once in a while. The worst that can happen is the card is given one */ + /* more-or-less descriptor block than the arbitrary value we've chosen. */ + /* No big deal */ + /* In short DO NOT ADD A LOCK HERE, OR WHERE RcvBuffersOnCard is adjusted. */ + /* Second - We expect this test to rarely evaluate to true. We attempt to */ + /* refill descriptor blocks as they are returned to us */ + /* (sxg_complete_descriptor_blocks), so The only time this should evaluate */ + /* to true is when sxg_complete_descriptor_blocks failed to allocate */ + /* receive buffers. */ if (adapter->RcvBuffersOnCard < SXG_RCV_DATA_BUFFERS) { sxg_stock_rcv_buffers(adapter); } - // It's more efficient to just set this to zero. - // But clearing the top bit saves potential debug info... + /* It's more efficient to just set this to zero. */ + /* But clearing the top bit saves potential debug info... */ Event->Status &= ~EVENT_STATUS_VALID; - // Advanct to the next event + /* Advanct to the next event */ SXG_ADVANCE_INDEX(adapter->NextEvent[RssId], EVENT_RING_SIZE); Event = &EventRing->Ring[adapter->NextEvent[RssId]]; EventsProcessed++; if (EventsProcessed == EVENT_RING_BATCH) { - // Release a batch of events back to the card + /* Release a batch of events back to the card */ WRITE_REG(adapter->UcodeRegs[RssId].EventRelease, EVENT_RING_BATCH, FALSE); EventsProcessed = 0; - // If we've processed our batch limit, break out of the - // loop and return SXG_ISR_EVENT to arrange for us to - // be called again + /* If we've processed our batch limit, break out of the */ + /* loop and return SXG_ISR_EVENT to arrange for us to */ + /* be called again */ if (Batches++ == EVENT_BATCH_LIMIT) { SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "EvtLimit", Batches, @@ -1265,14 +1266,14 @@ static u32 sxg_process_event_queue(p_adapter_t adapter, u32 RssId) } } #ifdef LINUX_HANDLES_RCV_INDICATION_LISTS - // - // Indicate any received dumb-nic frames - // + /* */ + /* Indicate any received dumb-nic frames */ + /* */ SXG_INDICATE_PACKETS(adapter, IndicationList, num_skbs); #endif - // - // Release events back to the card. - // + /* */ + /* Release events back to the card. */ + /* */ if (EventsProcessed) { WRITE_REG(adapter->UcodeRegs[RssId].EventRelease, EventsProcessed, FALSE); @@ -1299,43 +1300,43 @@ static void sxg_complete_slow_send(p_adapter_t adapter) u32 *ContextType; PSXG_CMD XmtCmd; - // NOTE - This lock is dropped and regrabbed in this loop. - // This means two different processors can both be running - // through this loop. Be *very* careful. + /* NOTE - This lock is dropped and regrabbed in this loop. */ + /* This means two different processors can both be running */ + /* through this loop. Be *very* careful. */ spin_lock(&adapter->XmtZeroLock); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "CmpSnds", adapter, XmtRingInfo->Head, XmtRingInfo->Tail, 0); while (XmtRingInfo->Tail != *adapter->XmtRingZeroIndex) { - // Locate the current Cmd (ring descriptor entry), and - // associated SGL, and advance the tail + /* Locate the current Cmd (ring descriptor entry), and */ + /* associated SGL, and advance the tail */ SXG_RETURN_CMD(XmtRing, XmtRingInfo, XmtCmd, ContextType); ASSERT(ContextType); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "CmpSnd", XmtRingInfo->Head, XmtRingInfo->Tail, XmtCmd, 0); - // Clear the SGL field. + /* Clear the SGL field. */ XmtCmd->Sgl = 0; switch (*ContextType) { case SXG_SGL_DUMB: { struct sk_buff *skb; - // Dumb-nic send. Command context is the dumb-nic SGL + /* Dumb-nic send. Command context is the dumb-nic SGL */ skb = (struct sk_buff *)ContextType; - // Complete the send + /* Complete the send */ SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "DmSndCmp", skb, 0, 0, 0); ASSERT(adapter->Stats.XmtQLen); - adapter->Stats.XmtQLen--; // within XmtZeroLock + adapter->Stats.XmtQLen--; /* within XmtZeroLock */ adapter->Stats.XmtOk++; - // Now drop the lock and complete the send back to - // Microsoft. We need to drop the lock because - // Microsoft can come back with a chimney send, which - // results in a double trip in SxgTcpOuput + /* Now drop the lock and complete the send back to */ + /* Microsoft. We need to drop the lock because */ + /* Microsoft can come back with a chimney send, which */ + /* results in a double trip in SxgTcpOuput */ spin_unlock(&adapter->XmtZeroLock); SXG_COMPLETE_DUMB_SEND(adapter, skb); - // and reacquire.. + /* and reacquire.. */ spin_lock(&adapter->XmtZeroLock); } break; @@ -1371,7 +1372,7 @@ static struct sk_buff *sxg_slow_receive(p_adapter_t adapter, PSXG_EVENT Event) SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "SlowRcv", Event, RcvDataBufferHdr, RcvDataBufferHdr->State, RcvDataBufferHdr->VirtualAddress); - // Drop rcv frames in non-running state + /* Drop rcv frames in non-running state */ switch (adapter->State) { case SXG_STATE_RUNNING: break; @@ -1384,12 +1385,12 @@ static struct sk_buff *sxg_slow_receive(p_adapter_t adapter, PSXG_EVENT Event) goto drop; } - // Change buffer state to UPSTREAM + /* Change buffer state to UPSTREAM */ RcvDataBufferHdr->State = SXG_BUFFER_UPSTREAM; if (Event->Status & EVENT_STATUS_RCVERR) { SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "RcvError", Event, Event->Status, Event->HostHandle, 0); - // XXXTODO - Remove this print later + /* XXXTODO - Remove this print later */ DBG_ERROR("SXG: Receive error %x\n", *(u32 *) SXG_RECEIVE_DATA_LOCATION(RcvDataBufferHdr)); sxg_process_rcv_error(adapter, *(u32 *) @@ -1397,8 +1398,8 @@ static struct sk_buff *sxg_slow_receive(p_adapter_t adapter, PSXG_EVENT Event) (RcvDataBufferHdr)); goto drop; } -#if XXXTODO // VLAN stuff - // If there's a VLAN tag, extract it and validate it +#if XXXTODO /* VLAN stuff */ + /* If there's a VLAN tag, extract it and validate it */ if (((p_ether_header) (SXG_RECEIVE_DATA_LOCATION(RcvDataBufferHdr)))-> EtherType == ETHERTYPE_VLAN) { if (SxgExtractVlanHeader(adapter, RcvDataBufferHdr, Event) != @@ -1411,9 +1412,9 @@ static struct sk_buff *sxg_slow_receive(p_adapter_t adapter, PSXG_EVENT Event) } } #endif - // - // Dumb-nic frame. See if it passes our mac filter and update stats - // + /* */ + /* Dumb-nic frame. See if it passes our mac filter and update stats */ + /* */ if (!sxg_mac_filter(adapter, (p_ether_header) SXG_RECEIVE_DATA_LOCATION(RcvDataBufferHdr), Event->Length)) { @@ -1427,9 +1428,9 @@ static struct sk_buff *sxg_slow_receive(p_adapter_t adapter, PSXG_EVENT Event) SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "DumbRcv", RcvDataBufferHdr, Packet, Event->Length, 0); - // - // Lastly adjust the receive packet length. - // + /* */ + /* Lastly adjust the receive packet length. */ + /* */ SXG_ADJUST_RCV_PACKET(Packet, RcvDataBufferHdr, Event); return (Packet); @@ -1541,7 +1542,7 @@ static bool sxg_mac_filter(p_adapter_t adapter, p_ether_header EtherHdr, if (SXG_MULTICAST_PACKET(EtherHdr)) { if (SXG_BROADCAST_PACKET(EtherHdr)) { - // broadcast + /* broadcast */ if (adapter->MacFilter & MAC_BCAST) { adapter->Stats.DumbRcvBcastPkts++; adapter->Stats.DumbRcvBcastBytes += length; @@ -1550,7 +1551,7 @@ static bool sxg_mac_filter(p_adapter_t adapter, p_ether_header EtherHdr, return (TRUE); } } else { - // multicast + /* multicast */ if (adapter->MacFilter & MAC_ALLMCAST) { adapter->Stats.DumbRcvMcastPkts++; adapter->Stats.DumbRcvMcastBytes += length; @@ -1580,9 +1581,9 @@ static bool sxg_mac_filter(p_adapter_t adapter, p_ether_header EtherHdr, } } } else if (adapter->MacFilter & MAC_DIRECTED) { - // Not broadcast or multicast. Must be directed at us or - // the card is in promiscuous mode. Either way, consider it - // ours if MAC_DIRECTED is set + /* Not broadcast or multicast. Must be directed at us or */ + /* the card is in promiscuous mode. Either way, consider it */ + /* ours if MAC_DIRECTED is set */ adapter->Stats.DumbRcvUcastPkts++; adapter->Stats.DumbRcvUcastBytes += length; adapter->Stats.DumbRcvPkts++; @@ -1590,7 +1591,7 @@ static bool sxg_mac_filter(p_adapter_t adapter, p_ether_header EtherHdr, return (TRUE); } if (adapter->MacFilter & MAC_PROMISC) { - // Whatever it is, keep it. + /* Whatever it is, keep it. */ adapter->Stats.DumbRcvPkts++; adapter->Stats.DumbRcvBytes += length; return (TRUE); @@ -1606,7 +1607,7 @@ static int sxg_register_interrupt(p_adapter_t adapter) DBG_ERROR ("sxg: %s AllocAdaptRsrcs adapter[%p] dev->irq[%x] %x\n", - __FUNCTION__, adapter, adapter->netdev->irq, NR_IRQS); + __func__, adapter, adapter->netdev->irq, NR_IRQS); spin_unlock_irqrestore(&sxg_global.driver_lock, sxg_global.flags); @@ -1625,18 +1626,18 @@ static int sxg_register_interrupt(p_adapter_t adapter) } adapter->intrregistered = 1; adapter->IntRegistered = TRUE; - // Disable RSS with line-based interrupts + /* Disable RSS with line-based interrupts */ adapter->MsiEnabled = FALSE; adapter->RssEnabled = FALSE; DBG_ERROR("sxg: %s AllocAdaptRsrcs adapter[%p] dev->irq[%x]\n", - __FUNCTION__, adapter, adapter->netdev->irq); + __func__, adapter, adapter->netdev->irq); } return (STATUS_SUCCESS); } static void sxg_deregister_interrupt(p_adapter_t adapter) { - DBG_ERROR("sxg: %s ENTER adapter[%p]\n", __FUNCTION__, adapter); + DBG_ERROR("sxg: %s ENTER adapter[%p]\n", __func__, adapter); #if XXXTODO slic_init_cleanup(adapter); #endif @@ -1651,7 +1652,7 @@ static void sxg_deregister_interrupt(p_adapter_t adapter) adapter->rcv_broadcasts = 0; adapter->rcv_multicasts = 0; adapter->rcv_unicasts = 0; - DBG_ERROR("sxg: %s EXIT\n", __FUNCTION__); + DBG_ERROR("sxg: %s EXIT\n", __func__); } /* @@ -1666,7 +1667,7 @@ static int sxg_if_init(p_adapter_t adapter) int status = 0; DBG_ERROR("sxg: %s (%s) ENTER states[%d:%d:%d] flags[%x]\n", - __FUNCTION__, adapter->netdev->name, + __func__, adapter->netdev->name, adapter->queues_initialized, adapter->state, adapter->linkstate, dev->flags); @@ -1680,7 +1681,7 @@ static int sxg_if_init(p_adapter_t adapter) adapter->devflags_prev = dev->flags; adapter->macopts = MAC_DIRECTED; if (dev->flags) { - DBG_ERROR("sxg: %s (%s) Set MAC options: ", __FUNCTION__, + DBG_ERROR("sxg: %s (%s) Set MAC options: ", __func__, adapter->netdev->name); if (dev->flags & IFF_BROADCAST) { adapter->macopts |= MAC_BCAST; @@ -1713,7 +1714,7 @@ static int sxg_if_init(p_adapter_t adapter) /* * clear any pending events, then enable interrupts */ - DBG_ERROR("sxg: %s ENABLE interrupts(slic)\n", __FUNCTION__); + DBG_ERROR("sxg: %s ENABLE interrupts(slic)\n", __func__); return (STATUS_SUCCESS); } @@ -1724,11 +1725,11 @@ static int sxg_entry_open(p_net_device dev) int status; ASSERT(adapter); - DBG_ERROR("sxg: %s adapter->activated[%d]\n", __FUNCTION__, + DBG_ERROR("sxg: %s adapter->activated[%d]\n", __func__, adapter->activated); DBG_ERROR ("sxg: %s (%s): [jiffies[%lx] cpu %d] dev[%p] adapt[%p] port[%d]\n", - __FUNCTION__, adapter->netdev->name, jiffies, smp_processor_id(), + __func__, adapter->netdev->name, jiffies, smp_processor_id(), adapter->netdev, adapter, adapter->port); netif_stop_queue(adapter->netdev); @@ -1738,16 +1739,16 @@ static int sxg_entry_open(p_net_device dev) sxg_global.num_sxg_ports_active++; adapter->activated = 1; } - // Initialize the adapter - DBG_ERROR("sxg: %s ENTER sxg_initialize_adapter\n", __FUNCTION__); + /* Initialize the adapter */ + DBG_ERROR("sxg: %s ENTER sxg_initialize_adapter\n", __func__); status = sxg_initialize_adapter(adapter); DBG_ERROR("sxg: %s EXIT sxg_initialize_adapter status[%x]\n", - __FUNCTION__, status); + __func__, status); if (status == STATUS_SUCCESS) { - DBG_ERROR("sxg: %s ENTER sxg_if_init\n", __FUNCTION__); + DBG_ERROR("sxg: %s ENTER sxg_if_init\n", __func__); status = sxg_if_init(adapter); - DBG_ERROR("sxg: %s EXIT sxg_if_init status[%x]\n", __FUNCTION__, + DBG_ERROR("sxg: %s EXIT sxg_if_init status[%x]\n", __func__, status); } @@ -1760,12 +1761,12 @@ static int sxg_entry_open(p_net_device dev) sxg_global.flags); return (status); } - DBG_ERROR("sxg: %s ENABLE ALL INTERRUPTS\n", __FUNCTION__); + DBG_ERROR("sxg: %s ENABLE ALL INTERRUPTS\n", __func__); - // Enable interrupts + /* Enable interrupts */ SXG_ENABLE_ALL_INTERRUPTS(adapter); - DBG_ERROR("sxg: %s EXIT\n", __FUNCTION__); + DBG_ERROR("sxg: %s EXIT\n", __func__); spin_unlock_irqrestore(&sxg_global.driver_lock, sxg_global.flags); return STATUS_SUCCESS; @@ -1779,27 +1780,27 @@ static void __devexit sxg_entry_remove(struct pci_dev *pcidev) p_adapter_t adapter = (p_adapter_t) netdev_priv(dev); ASSERT(adapter); - DBG_ERROR("sxg: %s ENTER dev[%p] adapter[%p]\n", __FUNCTION__, dev, + DBG_ERROR("sxg: %s ENTER dev[%p] adapter[%p]\n", __func__, dev, adapter); sxg_deregister_interrupt(adapter); sxg_unmap_mmio_space(adapter); - DBG_ERROR("sxg: %s unregister_netdev\n", __FUNCTION__); + DBG_ERROR("sxg: %s unregister_netdev\n", __func__); unregister_netdev(dev); mmio_start = pci_resource_start(pcidev, 0); mmio_len = pci_resource_len(pcidev, 0); - DBG_ERROR("sxg: %s rel_region(0) start[%x] len[%x]\n", __FUNCTION__, + DBG_ERROR("sxg: %s rel_region(0) start[%x] len[%x]\n", __func__, mmio_start, mmio_len); release_mem_region(mmio_start, mmio_len); - DBG_ERROR("sxg: %s iounmap dev->base_addr[%x]\n", __FUNCTION__, + DBG_ERROR("sxg: %s iounmap dev->base_addr[%x]\n", __func__, (unsigned int)dev->base_addr); iounmap((char *)dev->base_addr); - DBG_ERROR("sxg: %s deallocate device\n", __FUNCTION__); + DBG_ERROR("sxg: %s deallocate device\n", __func__); kfree(dev); - DBG_ERROR("sxg: %s EXIT\n", __FUNCTION__); + DBG_ERROR("sxg: %s EXIT\n", __func__); } static int sxg_entry_halt(p_net_device dev) @@ -1807,17 +1808,17 @@ static int sxg_entry_halt(p_net_device dev) p_adapter_t adapter = (p_adapter_t) netdev_priv(dev); spin_lock_irqsave(&sxg_global.driver_lock, sxg_global.flags); - DBG_ERROR("sxg: %s (%s) ENTER\n", __FUNCTION__, dev->name); + DBG_ERROR("sxg: %s (%s) ENTER\n", __func__, dev->name); netif_stop_queue(adapter->netdev); adapter->state = ADAPT_DOWN; adapter->linkstate = LINK_DOWN; adapter->devflags_prev = 0; DBG_ERROR("sxg: %s (%s) set adapter[%p] state to ADAPT_DOWN(%d)\n", - __FUNCTION__, dev->name, adapter, adapter->state); + __func__, dev->name, adapter, adapter->state); - DBG_ERROR("sxg: %s (%s) EXIT\n", __FUNCTION__, dev->name); - DBG_ERROR("sxg: %s EXIT\n", __FUNCTION__); + DBG_ERROR("sxg: %s (%s) EXIT\n", __func__, dev->name); + DBG_ERROR("sxg: %s EXIT\n", __func__); spin_unlock_irqrestore(&sxg_global.driver_lock, sxg_global.flags); return (STATUS_SUCCESS); } @@ -1825,11 +1826,11 @@ static int sxg_entry_halt(p_net_device dev) static int sxg_ioctl(p_net_device dev, struct ifreq *rq, int cmd) { ASSERT(rq); -// DBG_ERROR("sxg: %s cmd[%x] rq[%p] dev[%p]\n", __FUNCTION__, cmd, rq, dev); +/* DBG_ERROR("sxg: %s cmd[%x] rq[%p] dev[%p]\n", __func__, cmd, rq, dev); */ switch (cmd) { case SIOCSLICSETINTAGG: { -// p_adapter_t adapter = (p_adapter_t) netdev_priv(dev); +/* p_adapter_t adapter = (p_adapter_t) netdev_priv(dev); */ u32 data[7]; u32 intagg; @@ -1841,12 +1842,12 @@ static int sxg_ioctl(p_net_device dev, struct ifreq *rq, int cmd) intagg = data[0]; printk(KERN_EMERG "%s: set interrupt aggregation to %d\n", - __FUNCTION__, intagg); + __func__, intagg); return 0; } default: -// DBG_ERROR("sxg: %s UNSUPPORTED[%x]\n", __FUNCTION__, cmd); +/* DBG_ERROR("sxg: %s UNSUPPORTED[%x]\n", __func__, cmd); */ return -EOPNOTSUPP; } return 0; @@ -1870,15 +1871,15 @@ static int sxg_send_packets(struct sk_buff *skb, p_net_device dev) p_adapter_t adapter = (p_adapter_t) netdev_priv(dev); u32 status = STATUS_SUCCESS; - DBG_ERROR("sxg: %s ENTER sxg_send_packets skb[%p]\n", __FUNCTION__, + DBG_ERROR("sxg: %s ENTER sxg_send_packets skb[%p]\n", __func__, skb); - // Check the adapter state + /* Check the adapter state */ switch (adapter->State) { case SXG_STATE_INITIALIZING: case SXG_STATE_HALTED: case SXG_STATE_SHUTDOWN: - ASSERT(0); // unexpected - // fall through + ASSERT(0); /* unexpected */ + /* fall through */ case SXG_STATE_RESETTING: case SXG_STATE_SLEEP: case SXG_STATE_BOOTDIAG: @@ -1898,23 +1899,23 @@ static int sxg_send_packets(struct sk_buff *skb, p_net_device dev) if (status != STATUS_SUCCESS) { goto xmit_fail; } - // send a packet + /* send a packet */ status = sxg_transmit_packet(adapter, skb); if (status == STATUS_SUCCESS) { goto xmit_done; } xmit_fail: - // reject & complete all the packets if they cant be sent + /* reject & complete all the packets if they cant be sent */ if (status != STATUS_SUCCESS) { #if XXXTODO -// sxg_send_packets_fail(adapter, skb, status); +/* sxg_send_packets_fail(adapter, skb, status); */ #else SXG_DROP_DUMB_SEND(adapter, skb); adapter->stats.tx_dropped++; #endif } - DBG_ERROR("sxg: %s EXIT sxg_send_packets status[%x]\n", __FUNCTION__, + DBG_ERROR("sxg: %s EXIT sxg_send_packets status[%x]\n", __func__, status); xmit_done: @@ -1940,12 +1941,12 @@ static int sxg_transmit_packet(p_adapter_t adapter, struct sk_buff *skb) void *SglBuffer; u32 SglBufferLength; - // The vast majority of work is done in the shared - // sxg_dumb_sgl routine. + /* The vast majority of work is done in the shared */ + /* sxg_dumb_sgl routine. */ SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbSend", adapter, skb, 0, 0); - // Allocate a SGL buffer + /* Allocate a SGL buffer */ SXG_GET_SGL_BUFFER(adapter, SxgSgl); if (!SxgSgl) { adapter->Stats.NoSglBuf++; @@ -1963,9 +1964,9 @@ static int sxg_transmit_packet(p_adapter_t adapter, struct sk_buff *skb) SxgSgl->DumbPacket = skb; pSgl = NULL; - // Call the common sxg_dumb_sgl routine to complete the send. + /* Call the common sxg_dumb_sgl routine to complete the send. */ sxg_dumb_sgl(pSgl, SxgSgl); - // Return success sxg_dumb_sgl (or something later) will complete it. + /* Return success sxg_dumb_sgl (or something later) will complete it. */ return (STATUS_SUCCESS); } @@ -1983,39 +1984,39 @@ static void sxg_dumb_sgl(PSCATTER_GATHER_LIST pSgl, PSXG_SCATTER_GATHER SxgSgl) { p_adapter_t adapter = SxgSgl->adapter; struct sk_buff *skb = SxgSgl->DumbPacket; - // For now, all dumb-nic sends go on RSS queue zero + /* For now, all dumb-nic sends go on RSS queue zero */ PSXG_XMT_RING XmtRing = &adapter->XmtRings[0]; PSXG_RING_INFO XmtRingInfo = &adapter->XmtRingZeroInfo; PSXG_CMD XmtCmd = NULL; -// u32 Index = 0; +/* u32 Index = 0; */ u32 DataLength = skb->len; -// unsigned int BufLen; -// u32 SglOffset; +/* unsigned int BufLen; */ +/* u32 SglOffset; */ u64 phys_addr; SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbSgl", pSgl, SxgSgl, 0, 0); - // Set aside a pointer to the sgl + /* Set aside a pointer to the sgl */ SxgSgl->pSgl = pSgl; - // Sanity check that our SGL format is as we expect. + /* Sanity check that our SGL format is as we expect. */ ASSERT(sizeof(SXG_X64_SGE) == sizeof(SCATTER_GATHER_ELEMENT)); - // Shouldn't be a vlan tag on this frame + /* Shouldn't be a vlan tag on this frame */ ASSERT(SxgSgl->VlanTag.VlanTci == 0); ASSERT(SxgSgl->VlanTag.VlanTpid == 0); - // From here below we work with the SGL placed in our - // buffer. + /* From here below we work with the SGL placed in our */ + /* buffer. */ SxgSgl->Sgl.NumberOfElements = 1; - // Grab the spinlock and acquire a command + /* Grab the spinlock and acquire a command */ spin_lock(&adapter->XmtZeroLock); SXG_GET_CMD(XmtRing, XmtRingInfo, XmtCmd, SxgSgl); if (XmtCmd == NULL) { - // Call sxg_complete_slow_send to see if we can - // free up any XmtRingZero entries and then try again + /* Call sxg_complete_slow_send to see if we can */ + /* free up any XmtRingZero entries and then try again */ spin_unlock(&adapter->XmtZeroLock); sxg_complete_slow_send(adapter); spin_lock(&adapter->XmtZeroLock); @@ -2027,10 +2028,10 @@ static void sxg_dumb_sgl(PSCATTER_GATHER_LIST pSgl, PSXG_SCATTER_GATHER SxgSgl) } SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DumbCmd", XmtCmd, XmtRingInfo->Head, XmtRingInfo->Tail, 0); - // Update stats + /* Update stats */ adapter->Stats.DumbXmtPkts++; adapter->Stats.DumbXmtBytes += DataLength; -#if XXXTODO // Stats stuff +#if XXXTODO /* Stats stuff */ if (SXG_MULTICAST_PACKET(EtherHdr)) { if (SXG_BROADCAST_PACKET(EtherHdr)) { adapter->Stats.DumbXmtBcastPkts++; @@ -2044,8 +2045,8 @@ static void sxg_dumb_sgl(PSCATTER_GATHER_LIST pSgl, PSXG_SCATTER_GATHER SxgSgl) adapter->Stats.DumbXmtUcastBytes += DataLength; } #endif - // Fill in the command - // Copy out the first SGE to the command and adjust for offset + /* Fill in the command */ + /* Copy out the first SGE to the command and adjust for offset */ phys_addr = pci_map_single(adapter->pcidev, skb->data, skb->len, PCI_DMA_TODEVICE); @@ -2053,54 +2054,54 @@ static void sxg_dumb_sgl(PSCATTER_GATHER_LIST pSgl, PSXG_SCATTER_GATHER SxgSgl) XmtCmd->Buffer.FirstSgeAddress = XmtCmd->Buffer.FirstSgeAddress << 32; XmtCmd->Buffer.FirstSgeAddress = XmtCmd->Buffer.FirstSgeAddress | SXG_GET_ADDR_LOW(phys_addr); -// XmtCmd->Buffer.FirstSgeAddress = SxgSgl->Sgl.Elements[Index].Address; -// XmtCmd->Buffer.FirstSgeAddress.LowPart += MdlOffset; +/* XmtCmd->Buffer.FirstSgeAddress = SxgSgl->Sgl.Elements[Index].Address; */ +/* XmtCmd->Buffer.FirstSgeAddress.LowPart += MdlOffset; */ XmtCmd->Buffer.FirstSgeLength = DataLength; - // Set a pointer to the remaining SGL entries -// XmtCmd->Sgl = SxgSgl->PhysicalAddress; - // Advance the physical address of the SxgSgl structure to - // the second SGE -// SglOffset = (u32)((u32 *)(&SxgSgl->Sgl.Elements[Index+1]) - -// (u32 *)SxgSgl); -// XmtCmd->Sgl.LowPart += SglOffset; + /* Set a pointer to the remaining SGL entries */ +/* XmtCmd->Sgl = SxgSgl->PhysicalAddress; */ + /* Advance the physical address of the SxgSgl structure to */ + /* the second SGE */ +/* SglOffset = (u32)((u32 *)(&SxgSgl->Sgl.Elements[Index+1]) - */ +/* (u32 *)SxgSgl); */ +/* XmtCmd->Sgl.LowPart += SglOffset; */ XmtCmd->Buffer.SgeOffset = 0; - // Note - TotalLength might be overwritten with MSS below.. + /* Note - TotalLength might be overwritten with MSS below.. */ XmtCmd->Buffer.TotalLength = DataLength; - XmtCmd->SgEntries = 1; //(ushort)(SxgSgl->Sgl.NumberOfElements - Index); + XmtCmd->SgEntries = 1; /*(ushort)(SxgSgl->Sgl.NumberOfElements - Index); */ XmtCmd->Flags = 0; - // - // Advance transmit cmd descripter by 1. - // NOTE - See comments in SxgTcpOutput where we write - // to the XmtCmd register regarding CPU ID values and/or - // multiple commands. - // - // + /* */ + /* Advance transmit cmd descripter by 1. */ + /* NOTE - See comments in SxgTcpOutput where we write */ + /* to the XmtCmd register regarding CPU ID values and/or */ + /* multiple commands. */ + /* */ + /* */ WRITE_REG(adapter->UcodeRegs[0].XmtCmd, 1, TRUE); - // - // - adapter->Stats.XmtQLen++; // Stats within lock + /* */ + /* */ + adapter->Stats.XmtQLen++; /* Stats within lock */ spin_unlock(&adapter->XmtZeroLock); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XDumSgl2", XmtCmd, pSgl, SxgSgl, 0); return; abortcmd: - // NOTE - Only jump to this label AFTER grabbing the - // XmtZeroLock, and DO NOT DROP IT between the - // command allocation and the following abort. + /* NOTE - Only jump to this label AFTER grabbing the */ + /* XmtZeroLock, and DO NOT DROP IT between the */ + /* command allocation and the following abort. */ if (XmtCmd) { SXG_ABORT_CMD(XmtRingInfo); } spin_unlock(&adapter->XmtZeroLock); -// failsgl: - // Jump to this label if failure occurs before the - // XmtZeroLock is grabbed +/* failsgl: */ + /* Jump to this label if failure occurs before the */ + /* XmtZeroLock is grabbed */ adapter->Stats.XmtErrors++; SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "DumSGFal", pSgl, SxgSgl, XmtRingInfo->Head, XmtRingInfo->Tail); - SXG_COMPLETE_DUMB_SEND(adapter, SxgSgl->DumbPacket); // SxgSgl->DumbPacket is the skb + SXG_COMPLETE_DUMB_SEND(adapter, SxgSgl->DumbPacket); /* SxgSgl->DumbPacket is the skb */ } /*************************************************************** @@ -2127,122 +2128,122 @@ static int sxg_initialize_link(p_adapter_t adapter) SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "InitLink", adapter, 0, 0, 0); - // Reset PHY and XGXS module + /* Reset PHY and XGXS module */ WRITE_REG(HwRegs->LinkStatus, LS_SERDES_POWER_DOWN, TRUE); - // Reset transmit configuration register + /* Reset transmit configuration register */ WRITE_REG(HwRegs->XmtConfig, XMT_CONFIG_RESET, TRUE); - // Reset receive configuration register + /* Reset receive configuration register */ WRITE_REG(HwRegs->RcvConfig, RCV_CONFIG_RESET, TRUE); - // Reset all MAC modules + /* Reset all MAC modules */ WRITE_REG(HwRegs->MacConfig0, AXGMAC_CFG0_SUB_RESET, TRUE); - // Link address 0 - // XXXTODO - This assumes the MAC address (0a:0b:0c:0d:0e:0f) - // is stored with the first nibble (0a) in the byte 0 - // of the Mac address. Possibly reverse? + /* Link address 0 */ + /* XXXTODO - This assumes the MAC address (0a:0b:0c:0d:0e:0f) */ + /* is stored with the first nibble (0a) in the byte 0 */ + /* of the Mac address. Possibly reverse? */ Value = *(u32 *) adapter->MacAddr; WRITE_REG(HwRegs->LinkAddress0Low, Value, TRUE); - // also write the MAC address to the MAC. Endian is reversed. + /* also write the MAC address to the MAC. Endian is reversed. */ WRITE_REG(HwRegs->MacAddressLow, ntohl(Value), TRUE); Value = (*(u16 *) & adapter->MacAddr[4] & 0x0000FFFF); WRITE_REG(HwRegs->LinkAddress0High, Value | LINK_ADDRESS_ENABLE, TRUE); - // endian swap for the MAC (put high bytes in bits [31:16], swapped) + /* endian swap for the MAC (put high bytes in bits [31:16], swapped) */ Value = ntohl(Value); WRITE_REG(HwRegs->MacAddressHigh, Value, TRUE); - // Link address 1 + /* Link address 1 */ WRITE_REG(HwRegs->LinkAddress1Low, 0, TRUE); WRITE_REG(HwRegs->LinkAddress1High, 0, TRUE); - // Link address 2 + /* Link address 2 */ WRITE_REG(HwRegs->LinkAddress2Low, 0, TRUE); WRITE_REG(HwRegs->LinkAddress2High, 0, TRUE); - // Link address 3 + /* Link address 3 */ WRITE_REG(HwRegs->LinkAddress3Low, 0, TRUE); WRITE_REG(HwRegs->LinkAddress3High, 0, TRUE); - // Enable MAC modules + /* Enable MAC modules */ WRITE_REG(HwRegs->MacConfig0, 0, TRUE); - // Configure MAC - WRITE_REG(HwRegs->MacConfig1, (AXGMAC_CFG1_XMT_PAUSE | // Allow sending of pause - AXGMAC_CFG1_XMT_EN | // Enable XMT - AXGMAC_CFG1_RCV_PAUSE | // Enable detection of pause - AXGMAC_CFG1_RCV_EN | // Enable receive - AXGMAC_CFG1_SHORT_ASSERT | // short frame detection - AXGMAC_CFG1_CHECK_LEN | // Verify frame length - AXGMAC_CFG1_GEN_FCS | // Generate FCS - AXGMAC_CFG1_PAD_64), // Pad frames to 64 bytes + /* Configure MAC */ + WRITE_REG(HwRegs->MacConfig1, (AXGMAC_CFG1_XMT_PAUSE | /* Allow sending of pause */ + AXGMAC_CFG1_XMT_EN | /* Enable XMT */ + AXGMAC_CFG1_RCV_PAUSE | /* Enable detection of pause */ + AXGMAC_CFG1_RCV_EN | /* Enable receive */ + AXGMAC_CFG1_SHORT_ASSERT | /* short frame detection */ + AXGMAC_CFG1_CHECK_LEN | /* Verify frame length */ + AXGMAC_CFG1_GEN_FCS | /* Generate FCS */ + AXGMAC_CFG1_PAD_64), /* Pad frames to 64 bytes */ TRUE); - // Set AXGMAC max frame length if jumbo. Not needed for standard MTU + /* Set AXGMAC max frame length if jumbo. Not needed for standard MTU */ if (adapter->JumboEnabled) { WRITE_REG(HwRegs->MacMaxFrameLen, AXGMAC_MAXFRAME_JUMBO, TRUE); } - // AMIIM Configuration Register - - // The value placed in the AXGMAC_AMIIM_CFG_HALF_CLOCK portion - // (bottom bits) of this register is used to determine the - // MDC frequency as specified in the A-XGMAC Design Document. - // This value must not be zero. The following value (62 or 0x3E) - // is based on our MAC transmit clock frequency (MTCLK) of 312.5 MHz. - // Given a maximum MDIO clock frequency of 2.5 MHz (see the PHY spec), - // we get: 312.5/(2*(X+1)) < 2.5 ==> X = 62. - // This value happens to be the default value for this register, - // so we really don't have to do this. + /* AMIIM Configuration Register - */ + /* The value placed in the AXGMAC_AMIIM_CFG_HALF_CLOCK portion */ + /* (bottom bits) of this register is used to determine the */ + /* MDC frequency as specified in the A-XGMAC Design Document. */ + /* This value must not be zero. The following value (62 or 0x3E) */ + /* is based on our MAC transmit clock frequency (MTCLK) of 312.5 MHz. */ + /* Given a maximum MDIO clock frequency of 2.5 MHz (see the PHY spec), */ + /* we get: 312.5/(2*(X+1)) < 2.5 ==> X = 62. */ + /* This value happens to be the default value for this register, */ + /* so we really don't have to do this. */ WRITE_REG(HwRegs->MacAmiimConfig, 0x0000003E, TRUE); - // Power up and enable PHY and XAUI/XGXS/Serdes logic + /* Power up and enable PHY and XAUI/XGXS/Serdes logic */ WRITE_REG(HwRegs->LinkStatus, (LS_PHY_CLR_RESET | LS_XGXS_ENABLE | LS_XGXS_CTL | LS_PHY_CLK_EN | LS_ATTN_ALARM), TRUE); DBG_ERROR("After Power Up and enable PHY in sxg_initialize_link\n"); - // Per information given by Aeluros, wait 100 ms after removing reset. - // It's not enough to wait for the self-clearing reset bit in reg 0 to clear. + /* Per information given by Aeluros, wait 100 ms after removing reset. */ + /* It's not enough to wait for the self-clearing reset bit in reg 0 to clear. */ mdelay(100); - // Verify the PHY has come up by checking that the Reset bit has cleared. - status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA, // PHY PMA/PMD module - PHY_PMA_CONTROL1, // PMA/PMD control register + /* Verify the PHY has come up by checking that the Reset bit has cleared. */ + status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA, /* PHY PMA/PMD module */ + PHY_PMA_CONTROL1, /* PMA/PMD control register */ &Value); if (status != STATUS_SUCCESS) return (STATUS_FAILURE); - if (Value & PMA_CONTROL1_RESET) // reset complete if bit is 0 + if (Value & PMA_CONTROL1_RESET) /* reset complete if bit is 0 */ return (STATUS_FAILURE); - // The SERDES should be initialized by now - confirm + /* The SERDES should be initialized by now - confirm */ READ_REG(HwRegs->LinkStatus, Value); - if (Value & LS_SERDES_DOWN) // verify SERDES is initialized + if (Value & LS_SERDES_DOWN) /* verify SERDES is initialized */ return (STATUS_FAILURE); - // The XAUI link should also be up - confirm - if (!(Value & LS_XAUI_LINK_UP)) // verify XAUI link is up + /* The XAUI link should also be up - confirm */ + if (!(Value & LS_XAUI_LINK_UP)) /* verify XAUI link is up */ return (STATUS_FAILURE); - // Initialize the PHY + /* Initialize the PHY */ status = sxg_phy_init(adapter); if (status != STATUS_SUCCESS) return (STATUS_FAILURE); - // Enable the Link Alarm - status = sxg_write_mdio_reg(adapter, MIIM_DEV_PHY_PMA, // PHY PMA/PMD module - LASI_CONTROL, // LASI control register - LASI_CTL_LS_ALARM_ENABLE); // enable link alarm bit + /* Enable the Link Alarm */ + status = sxg_write_mdio_reg(adapter, MIIM_DEV_PHY_PMA, /* PHY PMA/PMD module */ + LASI_CONTROL, /* LASI control register */ + LASI_CTL_LS_ALARM_ENABLE); /* enable link alarm bit */ if (status != STATUS_SUCCESS) return (STATUS_FAILURE); - // XXXTODO - temporary - verify bit is set - status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA, // PHY PMA/PMD module - LASI_CONTROL, // LASI control register + /* XXXTODO - temporary - verify bit is set */ + status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA, /* PHY PMA/PMD module */ + LASI_CONTROL, /* LASI control register */ &Value); if (status != STATUS_SUCCESS) return (STATUS_FAILURE); if (!(Value & LASI_CTL_LS_ALARM_ENABLE)) { DBG_ERROR("Error! LASI Control Alarm Enable bit not set!\n"); } - // Enable receive + /* Enable receive */ MaxFrame = adapter->JumboEnabled ? JUMBOMAXFRAME : ETHERMAXFRAME; ConfigData = (RCV_CONFIG_ENABLE | RCV_CONFIG_ENPARSE | @@ -2256,7 +2257,7 @@ static int sxg_initialize_link(p_adapter_t adapter) WRITE_REG(HwRegs->XmtConfig, XMT_CONFIG_ENABLE, TRUE); - // Mark the link as down. We'll get a link event when it comes up. + /* Mark the link as down. We'll get a link event when it comes up. */ sxg_link_state(adapter, SXG_LINK_DOWN); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "XInitLnk", @@ -2279,35 +2280,35 @@ static int sxg_phy_init(p_adapter_t adapter) PPHY_UCODE p; int status; - DBG_ERROR("ENTER %s\n", __FUNCTION__); + DBG_ERROR("ENTER %s\n", __func__); - // Read a register to identify the PHY type - status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA, // PHY PMA/PMD module - 0xC205, // PHY ID register (?) - &Value); // XXXTODO - add def + /* Read a register to identify the PHY type */ + status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA, /* PHY PMA/PMD module */ + 0xC205, /* PHY ID register (?) */ + &Value); /* XXXTODO - add def */ if (status != STATUS_SUCCESS) return (STATUS_FAILURE); - if (Value == 0x0012) { // 0x0012 == AEL2005C PHY(?) - XXXTODO - add def + if (Value == 0x0012) { /* 0x0012 == AEL2005C PHY(?) - XXXTODO - add def */ DBG_ERROR ("AEL2005C PHY detected. Downloading PHY microcode.\n"); - // Initialize AEL2005C PHY and download PHY microcode + /* Initialize AEL2005C PHY and download PHY microcode */ for (p = PhyUcode; p->Addr != 0xFFFF; p++) { if (p->Addr == 0) { - // if address == 0, data == sleep time in ms + /* if address == 0, data == sleep time in ms */ mdelay(p->Data); } else { - // write the given data to the specified address - status = sxg_write_mdio_reg(adapter, MIIM_DEV_PHY_PMA, // PHY PMA/PMD module - p->Addr, // PHY address - p->Data); // PHY data + /* write the given data to the specified address */ + status = sxg_write_mdio_reg(adapter, MIIM_DEV_PHY_PMA, /* PHY PMA/PMD module */ + p->Addr, /* PHY address */ + p->Data); /* PHY data */ if (status != STATUS_SUCCESS) return (STATUS_FAILURE); } } } - DBG_ERROR("EXIT %s\n", __FUNCTION__); + DBG_ERROR("EXIT %s\n", __func__); return (STATUS_SUCCESS); } @@ -2330,42 +2331,42 @@ static void sxg_link_event(p_adapter_t adapter) SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "LinkEvnt", adapter, 0, 0, 0); - DBG_ERROR("ENTER %s\n", __FUNCTION__); + DBG_ERROR("ENTER %s\n", __func__); - // Check the Link Status register. We should have a Link Alarm. + /* Check the Link Status register. We should have a Link Alarm. */ READ_REG(HwRegs->LinkStatus, Value); if (Value & LS_LINK_ALARM) { - // We got a Link Status alarm. First, pause to let the - // link state settle (it can bounce a number of times) + /* We got a Link Status alarm. First, pause to let the */ + /* link state settle (it can bounce a number of times) */ mdelay(10); - // Now clear the alarm by reading the LASI status register. - status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA, // PHY PMA/PMD module - LASI_STATUS, // LASI status register + /* Now clear the alarm by reading the LASI status register. */ + status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA, /* PHY PMA/PMD module */ + LASI_STATUS, /* LASI status register */ &Value); if (status != STATUS_SUCCESS) { DBG_ERROR("Error reading LASI Status MDIO register!\n"); sxg_link_state(adapter, SXG_LINK_DOWN); -// ASSERT(0); +/* ASSERT(0); */ } ASSERT(Value & LASI_STATUS_LS_ALARM); - // Now get and set the link state + /* Now get and set the link state */ LinkState = sxg_get_link_state(adapter); sxg_link_state(adapter, LinkState); DBG_ERROR("SXG: Link Alarm occurred. Link is %s\n", ((LinkState == SXG_LINK_UP) ? "UP" : "DOWN")); } else { - // XXXTODO - Assuming Link Attention is only being generated for the - // Link Alarm pin (and not for a XAUI Link Status change), then it's - // impossible to get here. Yet we've gotten here twice (under extreme - // conditions - bouncing the link up and down many times a second). - // Needs further investigation. + /* XXXTODO - Assuming Link Attention is only being generated for the */ + /* Link Alarm pin (and not for a XAUI Link Status change), then it's */ + /* impossible to get here. Yet we've gotten here twice (under extreme */ + /* conditions - bouncing the link up and down many times a second). */ + /* Needs further investigation. */ DBG_ERROR("SXG: sxg_link_event: Can't get here!\n"); DBG_ERROR("SXG: Link Status == 0x%08X.\n", Value); -// ASSERT(0); +/* ASSERT(0); */ } - DBG_ERROR("EXIT %s\n", __FUNCTION__); + DBG_ERROR("EXIT %s\n", __func__); } @@ -2383,50 +2384,50 @@ static SXG_LINK_STATE sxg_get_link_state(p_adapter_t adapter) int status; u32 Value; - DBG_ERROR("ENTER %s\n", __FUNCTION__); + DBG_ERROR("ENTER %s\n", __func__); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "GetLink", adapter, 0, 0, 0); - // Per the Xenpak spec (and the IEEE 10Gb spec?), the link is up if - // the following 3 bits (from 3 different MDIO registers) are all true. - status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA, // PHY PMA/PMD module - PHY_PMA_RCV_DET, // PMA/PMD Receive Signal Detect register + /* Per the Xenpak spec (and the IEEE 10Gb spec?), the link is up if */ + /* the following 3 bits (from 3 different MDIO registers) are all true. */ + status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PMA, /* PHY PMA/PMD module */ + PHY_PMA_RCV_DET, /* PMA/PMD Receive Signal Detect register */ &Value); if (status != STATUS_SUCCESS) goto bad; - // If PMA/PMD receive signal detect is 0, then the link is down + /* If PMA/PMD receive signal detect is 0, then the link is down */ if (!(Value & PMA_RCV_DETECT)) return (SXG_LINK_DOWN); - status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PCS, // PHY PCS module - PHY_PCS_10G_STATUS1, // PCS 10GBASE-R Status 1 register + status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_PCS, /* PHY PCS module */ + PHY_PCS_10G_STATUS1, /* PCS 10GBASE-R Status 1 register */ &Value); if (status != STATUS_SUCCESS) goto bad; - // If PCS is not locked to receive blocks, then the link is down + /* If PCS is not locked to receive blocks, then the link is down */ if (!(Value & PCS_10B_BLOCK_LOCK)) return (SXG_LINK_DOWN); - status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_XS, // PHY XS module - PHY_XS_LANE_STATUS, // XS Lane Status register + status = sxg_read_mdio_reg(adapter, MIIM_DEV_PHY_XS, /* PHY XS module */ + PHY_XS_LANE_STATUS, /* XS Lane Status register */ &Value); if (status != STATUS_SUCCESS) goto bad; - // If XS transmit lanes are not aligned, then the link is down + /* If XS transmit lanes are not aligned, then the link is down */ if (!(Value & XS_LANE_ALIGN)) return (SXG_LINK_DOWN); - // All 3 bits are true, so the link is up - DBG_ERROR("EXIT %s\n", __FUNCTION__); + /* All 3 bits are true, so the link is up */ + DBG_ERROR("EXIT %s\n", __func__); return (SXG_LINK_UP); bad: - // An error occurred reading an MDIO register. This shouldn't happen. + /* An error occurred reading an MDIO register. This shouldn't happen. */ DBG_ERROR("Error reading an MDIO register!\n"); ASSERT(0); return (SXG_LINK_DOWN); @@ -2437,11 +2438,11 @@ static void sxg_indicate_link_state(p_adapter_t adapter, { if (adapter->LinkState == SXG_LINK_UP) { DBG_ERROR("%s: LINK now UP, call netif_start_queue\n", - __FUNCTION__); + __func__); netif_start_queue(adapter->netdev); } else { DBG_ERROR("%s: LINK now DOWN, call netif_stop_queue\n", - __FUNCTION__); + __func__); netif_stop_queue(adapter->netdev); } } @@ -2464,23 +2465,23 @@ static void sxg_link_state(p_adapter_t adapter, SXG_LINK_STATE LinkState) SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "LnkINDCT", adapter, LinkState, adapter->LinkState, adapter->State); - DBG_ERROR("ENTER %s\n", __FUNCTION__); + DBG_ERROR("ENTER %s\n", __func__); - // Hold the adapter lock during this routine. Maybe move - // the lock to the caller. + /* Hold the adapter lock during this routine. Maybe move */ + /* the lock to the caller. */ spin_lock(&adapter->AdapterLock); if (LinkState == adapter->LinkState) { - // Nothing changed.. + /* Nothing changed.. */ spin_unlock(&adapter->AdapterLock); - DBG_ERROR("EXIT #0 %s\n", __FUNCTION__); + DBG_ERROR("EXIT #0 %s\n", __func__); return; } - // Save the adapter state + /* Save the adapter state */ adapter->LinkState = LinkState; - // Drop the lock and indicate link state + /* Drop the lock and indicate link state */ spin_unlock(&adapter->AdapterLock); - DBG_ERROR("EXIT #1 %s\n", __FUNCTION__); + DBG_ERROR("EXIT #1 %s\n", __func__); sxg_indicate_link_state(adapter, LinkState); } @@ -2501,76 +2502,76 @@ static int sxg_write_mdio_reg(p_adapter_t adapter, u32 DevAddr, u32 RegAddr, u32 Value) { PSXG_HW_REGS HwRegs = adapter->HwRegs; - u32 AddrOp; // Address operation (written to MIIM field reg) - u32 WriteOp; // Write operation (written to MIIM field reg) - u32 Cmd; // Command (written to MIIM command reg) + u32 AddrOp; /* Address operation (written to MIIM field reg) */ + u32 WriteOp; /* Write operation (written to MIIM field reg) */ + u32 Cmd; /* Command (written to MIIM command reg) */ u32 ValueRead; u32 Timeout; -// DBG_ERROR("ENTER %s\n", __FUNCTION__); +/* DBG_ERROR("ENTER %s\n", __func__); */ SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "WrtMDIO", adapter, 0, 0, 0); - // Ensure values don't exceed field width - DevAddr &= 0x001F; // 5-bit field - RegAddr &= 0xFFFF; // 16-bit field - Value &= 0xFFFF; // 16-bit field + /* Ensure values don't exceed field width */ + DevAddr &= 0x001F; /* 5-bit field */ + RegAddr &= 0xFFFF; /* 16-bit field */ + Value &= 0xFFFF; /* 16-bit field */ - // Set MIIM field register bits for an MIIM address operation + /* Set MIIM field register bits for an MIIM address operation */ AddrOp = (MIIM_PORT_NUM << AXGMAC_AMIIM_FIELD_PORT_SHIFT) | (DevAddr << AXGMAC_AMIIM_FIELD_DEV_SHIFT) | (MIIM_TA_10GB << AXGMAC_AMIIM_FIELD_TA_SHIFT) | (MIIM_OP_ADDR << AXGMAC_AMIIM_FIELD_OP_SHIFT) | RegAddr; - // Set MIIM field register bits for an MIIM write operation + /* Set MIIM field register bits for an MIIM write operation */ WriteOp = (MIIM_PORT_NUM << AXGMAC_AMIIM_FIELD_PORT_SHIFT) | (DevAddr << AXGMAC_AMIIM_FIELD_DEV_SHIFT) | (MIIM_TA_10GB << AXGMAC_AMIIM_FIELD_TA_SHIFT) | (MIIM_OP_WRITE << AXGMAC_AMIIM_FIELD_OP_SHIFT) | Value; - // Set MIIM command register bits to execute an MIIM command + /* Set MIIM command register bits to execute an MIIM command */ Cmd = AXGMAC_AMIIM_CMD_START | AXGMAC_AMIIM_CMD_10G_OPERATION; - // Reset the command register command bit (in case it's not 0) + /* Reset the command register command bit (in case it's not 0) */ WRITE_REG(HwRegs->MacAmiimCmd, 0, TRUE); - // MIIM write to set the address of the specified MDIO register + /* MIIM write to set the address of the specified MDIO register */ WRITE_REG(HwRegs->MacAmiimField, AddrOp, TRUE); - // Write to MIIM Command Register to execute to address operation + /* Write to MIIM Command Register to execute to address operation */ WRITE_REG(HwRegs->MacAmiimCmd, Cmd, TRUE); - // Poll AMIIM Indicator register to wait for completion + /* Poll AMIIM Indicator register to wait for completion */ Timeout = SXG_LINK_TIMEOUT; do { - udelay(100); // Timeout in 100us units + udelay(100); /* Timeout in 100us units */ READ_REG(HwRegs->MacAmiimIndicator, ValueRead); if (--Timeout == 0) { return (STATUS_FAILURE); } } while (ValueRead & AXGMAC_AMIIM_INDC_BUSY); - // Reset the command register command bit + /* Reset the command register command bit */ WRITE_REG(HwRegs->MacAmiimCmd, 0, TRUE); - // MIIM write to set up an MDIO write operation + /* MIIM write to set up an MDIO write operation */ WRITE_REG(HwRegs->MacAmiimField, WriteOp, TRUE); - // Write to MIIM Command Register to execute the write operation + /* Write to MIIM Command Register to execute the write operation */ WRITE_REG(HwRegs->MacAmiimCmd, Cmd, TRUE); - // Poll AMIIM Indicator register to wait for completion + /* Poll AMIIM Indicator register to wait for completion */ Timeout = SXG_LINK_TIMEOUT; do { - udelay(100); // Timeout in 100us units + udelay(100); /* Timeout in 100us units */ READ_REG(HwRegs->MacAmiimIndicator, ValueRead); if (--Timeout == 0) { return (STATUS_FAILURE); } } while (ValueRead & AXGMAC_AMIIM_INDC_BUSY); -// DBG_ERROR("EXIT %s\n", __FUNCTION__); +/* DBG_ERROR("EXIT %s\n", __func__); */ return (STATUS_SUCCESS); } @@ -2591,110 +2592,78 @@ static int sxg_read_mdio_reg(p_adapter_t adapter, u32 DevAddr, u32 RegAddr, u32 *pValue) { PSXG_HW_REGS HwRegs = adapter->HwRegs; - u32 AddrOp; // Address operation (written to MIIM field reg) - u32 ReadOp; // Read operation (written to MIIM field reg) - u32 Cmd; // Command (written to MIIM command reg) + u32 AddrOp; /* Address operation (written to MIIM field reg) */ + u32 ReadOp; /* Read operation (written to MIIM field reg) */ + u32 Cmd; /* Command (written to MIIM command reg) */ u32 ValueRead; u32 Timeout; SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "WrtMDIO", adapter, 0, 0, 0); -// DBG_ERROR("ENTER %s\n", __FUNCTION__); +/* DBG_ERROR("ENTER %s\n", __func__); */ - // Ensure values don't exceed field width - DevAddr &= 0x001F; // 5-bit field - RegAddr &= 0xFFFF; // 16-bit field + /* Ensure values don't exceed field width */ + DevAddr &= 0x001F; /* 5-bit field */ + RegAddr &= 0xFFFF; /* 16-bit field */ - // Set MIIM field register bits for an MIIM address operation + /* Set MIIM field register bits for an MIIM address operation */ AddrOp = (MIIM_PORT_NUM << AXGMAC_AMIIM_FIELD_PORT_SHIFT) | (DevAddr << AXGMAC_AMIIM_FIELD_DEV_SHIFT) | (MIIM_TA_10GB << AXGMAC_AMIIM_FIELD_TA_SHIFT) | (MIIM_OP_ADDR << AXGMAC_AMIIM_FIELD_OP_SHIFT) | RegAddr; - // Set MIIM field register bits for an MIIM read operation + /* Set MIIM field register bits for an MIIM read operation */ ReadOp = (MIIM_PORT_NUM << AXGMAC_AMIIM_FIELD_PORT_SHIFT) | (DevAddr << AXGMAC_AMIIM_FIELD_DEV_SHIFT) | (MIIM_TA_10GB << AXGMAC_AMIIM_FIELD_TA_SHIFT) | (MIIM_OP_READ << AXGMAC_AMIIM_FIELD_OP_SHIFT); - // Set MIIM command register bits to execute an MIIM command + /* Set MIIM command register bits to execute an MIIM command */ Cmd = AXGMAC_AMIIM_CMD_START | AXGMAC_AMIIM_CMD_10G_OPERATION; - // Reset the command register command bit (in case it's not 0) + /* Reset the command register command bit (in case it's not 0) */ WRITE_REG(HwRegs->MacAmiimCmd, 0, TRUE); - // MIIM write to set the address of the specified MDIO register + /* MIIM write to set the address of the specified MDIO register */ WRITE_REG(HwRegs->MacAmiimField, AddrOp, TRUE); - // Write to MIIM Command Register to execute to address operation + /* Write to MIIM Command Register to execute to address operation */ WRITE_REG(HwRegs->MacAmiimCmd, Cmd, TRUE); - // Poll AMIIM Indicator register to wait for completion + /* Poll AMIIM Indicator register to wait for completion */ Timeout = SXG_LINK_TIMEOUT; do { - udelay(100); // Timeout in 100us units + udelay(100); /* Timeout in 100us units */ READ_REG(HwRegs->MacAmiimIndicator, ValueRead); if (--Timeout == 0) { return (STATUS_FAILURE); } } while (ValueRead & AXGMAC_AMIIM_INDC_BUSY); - // Reset the command register command bit + /* Reset the command register command bit */ WRITE_REG(HwRegs->MacAmiimCmd, 0, TRUE); - // MIIM write to set up an MDIO register read operation + /* MIIM write to set up an MDIO register read operation */ WRITE_REG(HwRegs->MacAmiimField, ReadOp, TRUE); - // Write to MIIM Command Register to execute the read operation + /* Write to MIIM Command Register to execute the read operation */ WRITE_REG(HwRegs->MacAmiimCmd, Cmd, TRUE); - // Poll AMIIM Indicator register to wait for completion + /* Poll AMIIM Indicator register to wait for completion */ Timeout = SXG_LINK_TIMEOUT; do { - udelay(100); // Timeout in 100us units + udelay(100); /* Timeout in 100us units */ READ_REG(HwRegs->MacAmiimIndicator, ValueRead); if (--Timeout == 0) { return (STATUS_FAILURE); } } while (ValueRead & AXGMAC_AMIIM_INDC_BUSY); - // Read the MDIO register data back from the field register + /* Read the MDIO register data back from the field register */ READ_REG(HwRegs->MacAmiimField, *pValue); - *pValue &= 0xFFFF; // data is in the lower 16 bits + *pValue &= 0xFFFF; /* data is in the lower 16 bits */ -// DBG_ERROR("EXIT %s\n", __FUNCTION__); - - return (STATUS_SUCCESS); -} - -/* - * Allocate a mcast_address structure to hold the multicast address. - * Link it in. - */ -static int sxg_mcast_add_list(p_adapter_t adapter, char *address) -{ - p_mcast_address_t mcaddr, mlist; - bool equaladdr; - - /* Check to see if it already exists */ - mlist = adapter->mcastaddrs; - while (mlist) { - ETHER_EQ_ADDR(mlist->address, address, equaladdr); - if (equaladdr) { - return (STATUS_SUCCESS); - } - mlist = mlist->next; - } - - /* Doesn't already exist. Allocate a structure to hold it */ - mcaddr = kmalloc(sizeof(mcast_address_t), GFP_ATOMIC); - if (mcaddr == NULL) - return 1; - - memcpy(mcaddr->address, address, 6); - - mcaddr->next = adapter->mcastaddrs; - adapter->mcastaddrs = mcaddr; +/* DBG_ERROR("EXIT %s\n", __func__); */ return (STATUS_SUCCESS); } @@ -2710,7 +2679,6 @@ static int sxg_mcast_add_list(p_adapter_t adapter, char *address) * */ static u32 sxg_crc_table[256]; /* Table of CRC's for all possible byte values */ -static u32 sxg_crc_init; /* Is table initialized */ /* * Contruct the CRC32 table @@ -2737,6 +2705,8 @@ static void sxg_mcast_init_crc32(void) } } +#if XXXTODO +static u32 sxg_crc_init; /* Is table initialized */ /* * Return the MAC hast as described above. */ @@ -2765,6 +2735,74 @@ static unsigned char sxg_mcast_get_mac_hash(char *macaddr) return (machash); } +static void sxg_mcast_set_mask(p_adapter_t adapter) +{ + PSXG_UCODE_REGS sxg_regs = adapter->UcodeRegs; + + DBG_ERROR("%s ENTER (%s) macopts[%x] mask[%llx]\n", __func__, + adapter->netdev->name, (unsigned int)adapter->MacFilter, + adapter->MulticastMask); + + if (adapter->MacFilter & (MAC_ALLMCAST | MAC_PROMISC)) { + /* Turn on all multicast addresses. We have to do this for promiscuous + * mode as well as ALLMCAST mode. It saves the Microcode from having + * to keep state about the MAC configuration. + */ +/* DBG_ERROR("sxg: %s macopts = MAC_ALLMCAST | MAC_PROMISC\n SLUT MODE!!!\n",__func__); */ + WRITE_REG(sxg_regs->McastLow, 0xFFFFFFFF, FLUSH); + WRITE_REG(sxg_regs->McastHigh, 0xFFFFFFFF, FLUSH); +/* DBG_ERROR("%s (%s) WRITE to slic_regs slic_mcastlow&high 0xFFFFFFFF\n",__func__, adapter->netdev->name); */ + + } else { + /* Commit our multicast mast to the SLIC by writing to the multicast + * address mask registers + */ + DBG_ERROR("%s (%s) WRITE mcastlow[%lx] mcasthigh[%lx]\n", + __func__, adapter->netdev->name, + ((ulong) (adapter->MulticastMask & 0xFFFFFFFF)), + ((ulong) + ((adapter->MulticastMask >> 32) & 0xFFFFFFFF))); + + WRITE_REG(sxg_regs->McastLow, + (u32) (adapter->MulticastMask & 0xFFFFFFFF), FLUSH); + WRITE_REG(sxg_regs->McastHigh, + (u32) ((adapter-> + MulticastMask >> 32) & 0xFFFFFFFF), FLUSH); + } +} + +/* + * Allocate a mcast_address structure to hold the multicast address. + * Link it in. + */ +static int sxg_mcast_add_list(p_adapter_t adapter, char *address) +{ + p_mcast_address_t mcaddr, mlist; + bool equaladdr; + + /* Check to see if it already exists */ + mlist = adapter->mcastaddrs; + while (mlist) { + ETHER_EQ_ADDR(mlist->address, address, equaladdr); + if (equaladdr) { + return (STATUS_SUCCESS); + } + mlist = mlist->next; + } + + /* Doesn't already exist. Allocate a structure to hold it */ + mcaddr = kmalloc(sizeof(mcast_address_t), GFP_ATOMIC); + if (mcaddr == NULL) + return 1; + + memcpy(mcaddr->address, address, 6); + + mcaddr->next = adapter->mcastaddrs; + adapter->mcastaddrs = mcaddr; + + return (STATUS_SUCCESS); +} + static void sxg_mcast_set_bit(p_adapter_t adapter, char *address) { unsigned char crcpoly; @@ -2783,7 +2821,6 @@ static void sxg_mcast_set_bit(p_adapter_t adapter, char *address) static void sxg_mcast_set_list(p_net_device dev) { -#if XXXTODO p_adapter_t adapter = (p_adapter_t) netdev_priv(dev); int status = STATUS_SUCCESS; int i; @@ -2809,7 +2846,7 @@ static void sxg_mcast_set_list(p_net_device dev) } DBG_ERROR("%s a->devflags_prev[%x] dev->flags[%x] status[%x]\n", - __FUNCTION__, adapter->devflags_prev, dev->flags, status); + __func__, adapter->devflags_prev, dev->flags, status); if (adapter->devflags_prev != dev->flags) { adapter->macopts = MAC_DIRECTED; if (dev->flags) { @@ -2828,60 +2865,24 @@ static void sxg_mcast_set_list(p_net_device dev) } adapter->devflags_prev = dev->flags; DBG_ERROR("%s call sxg_config_set adapter->macopts[%x]\n", - __FUNCTION__, adapter->macopts); + __func__, adapter->macopts); sxg_config_set(adapter, TRUE); } else { if (status == STATUS_SUCCESS) { sxg_mcast_set_mask(adapter); } } -#endif return; } - -static void sxg_mcast_set_mask(p_adapter_t adapter) -{ - PSXG_UCODE_REGS sxg_regs = adapter->UcodeRegs; - - DBG_ERROR("%s ENTER (%s) macopts[%x] mask[%llx]\n", __FUNCTION__, - adapter->netdev->name, (unsigned int)adapter->MacFilter, - adapter->MulticastMask); - - if (adapter->MacFilter & (MAC_ALLMCAST | MAC_PROMISC)) { - /* Turn on all multicast addresses. We have to do this for promiscuous - * mode as well as ALLMCAST mode. It saves the Microcode from having - * to keep state about the MAC configuration. - */ -// DBG_ERROR("sxg: %s macopts = MAC_ALLMCAST | MAC_PROMISC\n SLUT MODE!!!\n",__FUNCTION__); - WRITE_REG(sxg_regs->McastLow, 0xFFFFFFFF, FLUSH); - WRITE_REG(sxg_regs->McastHigh, 0xFFFFFFFF, FLUSH); -// DBG_ERROR("%s (%s) WRITE to slic_regs slic_mcastlow&high 0xFFFFFFFF\n",__FUNCTION__, adapter->netdev->name); - - } else { - /* Commit our multicast mast to the SLIC by writing to the multicast - * address mask registers - */ - DBG_ERROR("%s (%s) WRITE mcastlow[%lx] mcasthigh[%lx]\n", - __FUNCTION__, adapter->netdev->name, - ((ulong) (adapter->MulticastMask & 0xFFFFFFFF)), - ((ulong) - ((adapter->MulticastMask >> 32) & 0xFFFFFFFF))); - - WRITE_REG(sxg_regs->McastLow, - (u32) (adapter->MulticastMask & 0xFFFFFFFF), FLUSH); - WRITE_REG(sxg_regs->McastHigh, - (u32) ((adapter-> - MulticastMask >> 32) & 0xFFFFFFFF), FLUSH); - } -} +#endif static void sxg_unmap_mmio_space(p_adapter_t adapter) { #if LINUX_FREES_ADAPTER_RESOURCES -// if (adapter->Regs) { -// iounmap(adapter->Regs); -// } -// adapter->slic_regs = NULL; +/* if (adapter->Regs) { */ +/* iounmap(adapter->Regs); */ +/* } */ +/* adapter->slic_regs = NULL; */ #endif } @@ -2909,8 +2910,8 @@ void SxgFreeResources(p_adapter_t adapter) IsrCount = adapter->MsiEnabled ? RssIds : 1; if (adapter->BasicAllocations == FALSE) { - // No allocations have been made, including spinlocks, - // or listhead initializations. Return. + /* No allocations have been made, including spinlocks, */ + /* or listhead initializations. Return. */ return; } @@ -2920,7 +2921,7 @@ void SxgFreeResources(p_adapter_t adapter) if (!(IsListEmpty(&adapter->AllSglBuffers))) { SxgFreeSglBuffers(adapter); } - // Free event queues. + /* Free event queues. */ if (adapter->EventRings) { pci_free_consistent(adapter->pcidev, sizeof(SXG_EVENT_RING) * RssIds, @@ -2947,17 +2948,17 @@ void SxgFreeResources(p_adapter_t adapter) SXG_FREE_PACKET_POOL(adapter->PacketPoolHandle); SXG_FREE_BUFFER_POOL(adapter->BufferPoolHandle); - // Unmap register spaces + /* Unmap register spaces */ SxgUnmapResources(adapter); - // Deregister DMA + /* Deregister DMA */ if (adapter->DmaHandle) { SXG_DEREGISTER_DMA(adapter->DmaHandle); } - // Deregister interrupt + /* Deregister interrupt */ SxgDeregisterInterrupt(adapter); - // Possibly free system info (5.2 only) + /* Possibly free system info (5.2 only) */ SXG_RELEASE_SYSTEM_INFO(adapter); SxgDiagFreeResources(adapter); @@ -3047,23 +3048,23 @@ static int sxg_allocate_buffer_memory(p_adapter_t adapter, SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "AllocMem", adapter, Size, BufferType, 0); - // Grab the adapter lock and check the state. - // If we're in anything other than INITIALIZING or - // RUNNING state, fail. This is to prevent - // allocations in an improper driver state + /* Grab the adapter lock and check the state. */ + /* If we're in anything other than INITIALIZING or */ + /* RUNNING state, fail. This is to prevent */ + /* allocations in an improper driver state */ spin_lock(&adapter->AdapterLock); - // Increment the AllocationsPending count while holding - // the lock. Pause processing relies on this + /* Increment the AllocationsPending count while holding */ + /* the lock. Pause processing relies on this */ ++adapter->AllocationsPending; spin_unlock(&adapter->AdapterLock); - // At initialization time allocate resources synchronously. + /* At initialization time allocate resources synchronously. */ Buffer = pci_alloc_consistent(adapter->pcidev, Size, &pBuffer); if (Buffer == NULL) { spin_lock(&adapter->AdapterLock); - // Decrement the AllocationsPending count while holding - // the lock. Pause processing relies on this + /* Decrement the AllocationsPending count while holding */ + /* the lock. Pause processing relies on this */ --adapter->AllocationsPending; spin_unlock(&adapter->AdapterLock); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "AlcMemF1", @@ -3113,10 +3114,10 @@ static void sxg_allocate_rcvblock_complete(p_adapter_t adapter, ASSERT((BufferSize == SXG_RCV_DATA_BUFFER_SIZE) || (BufferSize == SXG_RCV_JUMBO_BUFFER_SIZE)); ASSERT(Length == SXG_RCV_BLOCK_SIZE(BufferSize)); - // First, initialize the contained pool of receive data - // buffers. This initialization requires NBL/NB/MDL allocations, - // If any of them fail, free the block and return without - // queueing the shared memory + /* First, initialize the contained pool of receive data */ + /* buffers. This initialization requires NBL/NB/MDL allocations, */ + /* If any of them fail, free the block and return without */ + /* queueing the shared memory */ RcvDataBuffer = RcvBlock; #if 0 for (i = 0, Paddr = *PhysicalAddress; @@ -3126,14 +3127,14 @@ static void sxg_allocate_rcvblock_complete(p_adapter_t adapter, for (i = 0, Paddr = PhysicalAddress; i < SXG_RCV_DESCRIPTORS_PER_BLOCK; i++, Paddr += BufferSize, RcvDataBuffer += BufferSize) { - // + /* */ RcvDataBufferHdr = (PSXG_RCV_DATA_BUFFER_HDR) (RcvDataBuffer + SXG_RCV_DATA_BUFFER_HDR_OFFSET (BufferSize)); RcvDataBufferHdr->VirtualAddress = RcvDataBuffer; RcvDataBufferHdr->PhysicalAddress = Paddr; - RcvDataBufferHdr->State = SXG_BUFFER_UPSTREAM; // For FREE macro assertion + RcvDataBufferHdr->State = SXG_BUFFER_UPSTREAM; /* For FREE macro assertion */ RcvDataBufferHdr->Size = SXG_RCV_BUFFER_DATA_SIZE(BufferSize); @@ -3143,8 +3144,8 @@ static void sxg_allocate_rcvblock_complete(p_adapter_t adapter, } - // Place this entire block of memory on the AllRcvBlocks queue so it can be - // free later + /* Place this entire block of memory on the AllRcvBlocks queue so it can be */ + /* free later */ RcvBlockHdr = (PSXG_RCV_BLOCK_HDR) ((unsigned char *)RcvBlock + SXG_RCV_BLOCK_HDR_OFFSET(BufferSize)); @@ -3155,7 +3156,7 @@ static void sxg_allocate_rcvblock_complete(p_adapter_t adapter, InsertTailList(&adapter->AllRcvBlocks, &RcvBlockHdr->AllList); spin_unlock(&adapter->RcvQLock); - // Now free the contained receive data buffers that we initialized above + /* Now free the contained receive data buffers that we initialized above */ RcvDataBuffer = RcvBlock; for (i = 0, Paddr = PhysicalAddress; i < SXG_RCV_DESCRIPTORS_PER_BLOCK; @@ -3168,7 +3169,7 @@ static void sxg_allocate_rcvblock_complete(p_adapter_t adapter, spin_unlock(&adapter->RcvQLock); } - // Locate the descriptor block and put it on a separate free queue + /* Locate the descriptor block and put it on a separate free queue */ RcvDescriptorBlock = (PSXG_RCV_DESCRIPTOR_BLOCK) ((unsigned char *)RcvBlock + SXG_RCV_DESCRIPTOR_BLOCK_OFFSET @@ -3186,7 +3187,7 @@ static void sxg_allocate_rcvblock_complete(p_adapter_t adapter, adapter, RcvBlock, Length, 0); return; fail: - // Free any allocated resources + /* Free any allocated resources */ if (RcvBlock) { RcvDataBuffer = RcvBlock; for (i = 0; i < SXG_RCV_DESCRIPTORS_PER_BLOCK; @@ -3200,7 +3201,7 @@ static void sxg_allocate_rcvblock_complete(p_adapter_t adapter, pci_free_consistent(adapter->pcidev, Length, RcvBlock, PhysicalAddress); } - DBG_ERROR("%s: OUT OF RESOURCES\n", __FUNCTION__); + DBG_ERROR("%s: OUT OF RESOURCES\n", __func__); SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_IMPORTANT, "RcvAFail", adapter, adapter->FreeRcvBufferCount, adapter->FreeRcvBlockCount, adapter->AllRcvBlockCount); @@ -3230,7 +3231,7 @@ static void sxg_allocate_sgl_buffer_complete(p_adapter_t adapter, adapter->AllSglBufferCount++; memset(SxgSgl, 0, sizeof(SXG_SCATTER_GATHER)); SxgSgl->PhysicalAddress = PhysicalAddress; /* *PhysicalAddress; */ - SxgSgl->adapter = adapter; // Initialize backpointer once + SxgSgl->adapter = adapter; /* Initialize backpointer once */ InsertTailList(&adapter->AllSglBuffers, &SxgSgl->AllList); spin_unlock(&adapter->SglQLock); SxgSgl->State = SXG_BUFFER_BUSY; @@ -3244,14 +3245,14 @@ static unsigned char temp_mac_address[6] = static void sxg_adapter_set_hwaddr(p_adapter_t adapter) { -// DBG_ERROR ("%s ENTER card->config_set[%x] port[%d] physport[%d] funct#[%d]\n", __FUNCTION__, -// card->config_set, adapter->port, adapter->physport, adapter->functionnumber); -// -// sxg_dbg_macaddrs(adapter); +/* DBG_ERROR ("%s ENTER card->config_set[%x] port[%d] physport[%d] funct#[%d]\n", __func__, */ +/* card->config_set, adapter->port, adapter->physport, adapter->functionnumber); */ +/* */ +/* sxg_dbg_macaddrs(adapter); */ memcpy(adapter->macaddr, temp_mac_address, sizeof(SXG_CONFIG_MAC)); -// DBG_ERROR ("%s AFTER copying from config.macinfo into currmacaddr\n", __FUNCTION__); -// sxg_dbg_macaddrs(adapter); +/* DBG_ERROR ("%s AFTER copying from config.macinfo into currmacaddr\n", __func__); */ +/* sxg_dbg_macaddrs(adapter); */ if (!(adapter->currmacaddr[0] || adapter->currmacaddr[1] || adapter->currmacaddr[2] || @@ -3262,18 +3263,18 @@ static void sxg_adapter_set_hwaddr(p_adapter_t adapter) if (adapter->netdev) { memcpy(adapter->netdev->dev_addr, adapter->currmacaddr, 6); } -// DBG_ERROR ("%s EXIT port %d\n", __FUNCTION__, adapter->port); +/* DBG_ERROR ("%s EXIT port %d\n", __func__, adapter->port); */ sxg_dbg_macaddrs(adapter); } +#if XXXTODO static int sxg_mac_set_address(p_net_device dev, void *ptr) { -#if XXXTODO p_adapter_t adapter = (p_adapter_t) netdev_priv(dev); struct sockaddr *addr = ptr; - DBG_ERROR("%s ENTER (%s)\n", __FUNCTION__, adapter->netdev->name); + DBG_ERROR("%s ENTER (%s)\n", __func__, adapter->netdev->name); if (netif_running(dev)) { return -EBUSY; @@ -3282,22 +3283,22 @@ static int sxg_mac_set_address(p_net_device dev, void *ptr) return -EBUSY; } DBG_ERROR("sxg: %s (%s) curr %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n", - __FUNCTION__, adapter->netdev->name, adapter->currmacaddr[0], + __func__, adapter->netdev->name, adapter->currmacaddr[0], adapter->currmacaddr[1], adapter->currmacaddr[2], adapter->currmacaddr[3], adapter->currmacaddr[4], adapter->currmacaddr[5]); memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); memcpy(adapter->currmacaddr, addr->sa_data, dev->addr_len); DBG_ERROR("sxg: %s (%s) new %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X\n", - __FUNCTION__, adapter->netdev->name, adapter->currmacaddr[0], + __func__, adapter->netdev->name, adapter->currmacaddr[0], adapter->currmacaddr[1], adapter->currmacaddr[2], adapter->currmacaddr[3], adapter->currmacaddr[4], adapter->currmacaddr[5]); sxg_config_set(adapter, TRUE); -#endif return 0; } +#endif /*****************************************************************************/ /************* SXG DRIVER FUNCTIONS (below) ********************************/ @@ -3321,77 +3322,77 @@ static int sxg_initialize_adapter(p_adapter_t adapter) SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "InitAdpt", adapter, 0, 0, 0); - RssIds = 1; // XXXTODO SXG_RSS_CPU_COUNT(adapter); + RssIds = 1; /* XXXTODO SXG_RSS_CPU_COUNT(adapter); */ IsrCount = adapter->MsiEnabled ? RssIds : 1; - // Sanity check SXG_UCODE_REGS structure definition to - // make sure the length is correct + /* Sanity check SXG_UCODE_REGS structure definition to */ + /* make sure the length is correct */ ASSERT(sizeof(SXG_UCODE_REGS) == SXG_REGISTER_SIZE_PER_CPU); - // Disable interrupts + /* Disable interrupts */ SXG_DISABLE_ALL_INTERRUPTS(adapter); - // Set MTU + /* Set MTU */ ASSERT((adapter->FrameSize == ETHERMAXFRAME) || (adapter->FrameSize == JUMBOMAXFRAME)); WRITE_REG(adapter->UcodeRegs[0].LinkMtu, adapter->FrameSize, TRUE); - // Set event ring base address and size + /* Set event ring base address and size */ WRITE_REG64(adapter, adapter->UcodeRegs[0].EventBase, adapter->PEventRings, 0); WRITE_REG(adapter->UcodeRegs[0].EventSize, EVENT_RING_SIZE, TRUE); - // Per-ISR initialization + /* Per-ISR initialization */ for (i = 0; i < IsrCount; i++) { u64 Addr; - // Set interrupt status pointer + /* Set interrupt status pointer */ Addr = adapter->PIsr + (i * sizeof(u32)); WRITE_REG64(adapter, adapter->UcodeRegs[i].Isp, Addr, i); } - // XMT ring zero index + /* XMT ring zero index */ WRITE_REG64(adapter, adapter->UcodeRegs[0].SPSendIndex, adapter->PXmtRingZeroIndex, 0); - // Per-RSS initialization + /* Per-RSS initialization */ for (i = 0; i < RssIds; i++) { - // Release all event ring entries to the Microcode + /* Release all event ring entries to the Microcode */ WRITE_REG(adapter->UcodeRegs[i].EventRelease, EVENT_RING_SIZE, TRUE); } - // Transmit ring base and size + /* Transmit ring base and size */ WRITE_REG64(adapter, adapter->UcodeRegs[0].XmtBase, adapter->PXmtRings, 0); WRITE_REG(adapter->UcodeRegs[0].XmtSize, SXG_XMT_RING_SIZE, TRUE); - // Receive ring base and size + /* Receive ring base and size */ WRITE_REG64(adapter, adapter->UcodeRegs[0].RcvBase, adapter->PRcvRings, 0); WRITE_REG(adapter->UcodeRegs[0].RcvSize, SXG_RCV_RING_SIZE, TRUE); - // Populate the card with receive buffers + /* Populate the card with receive buffers */ sxg_stock_rcv_buffers(adapter); - // Initialize checksum offload capabilities. At the moment - // we always enable IP and TCP receive checksums on the card. - // Depending on the checksum configuration specified by the - // user, we can choose to report or ignore the checksum - // information provided by the card. + /* Initialize checksum offload capabilities. At the moment */ + /* we always enable IP and TCP receive checksums on the card. */ + /* Depending on the checksum configuration specified by the */ + /* user, we can choose to report or ignore the checksum */ + /* information provided by the card. */ WRITE_REG(adapter->UcodeRegs[0].ReceiveChecksum, SXG_RCV_TCP_CSUM_ENABLED | SXG_RCV_IP_CSUM_ENABLED, TRUE); - // Initialize the MAC, XAUI - DBG_ERROR("sxg: %s ENTER sxg_initialize_link\n", __FUNCTION__); + /* Initialize the MAC, XAUI */ + DBG_ERROR("sxg: %s ENTER sxg_initialize_link\n", __func__); status = sxg_initialize_link(adapter); - DBG_ERROR("sxg: %s EXIT sxg_initialize_link status[%x]\n", __FUNCTION__, + DBG_ERROR("sxg: %s EXIT sxg_initialize_link status[%x]\n", __func__, status); if (status != STATUS_SUCCESS) { return (status); } - // Initialize Dead to FALSE. - // SlicCheckForHang or SlicDumpThread will take it from here. + /* Initialize Dead to FALSE. */ + /* SlicCheckForHang or SlicDumpThread will take it from here. */ adapter->Dead = FALSE; adapter->PingOutstanding = FALSE; @@ -3428,14 +3429,14 @@ static int sxg_fill_descriptor_block(p_adapter_t adapter, ASSERT(RcvDescriptorBlockHdr); - // If we don't have the resources to fill the descriptor block, - // return failure + /* If we don't have the resources to fill the descriptor block, */ + /* return failure */ if ((adapter->FreeRcvBufferCount < SXG_RCV_DESCRIPTORS_PER_BLOCK) || SXG_RING_FULL(RcvRingInfo)) { adapter->Stats.NoMem++; return (STATUS_FAILURE); } - // Get a ring descriptor command + /* Get a ring descriptor command */ SXG_GET_CMD(RingZero, RcvRingInfo, RingDescriptorCmd, RcvDescriptorBlockHdr); ASSERT(RingDescriptorCmd); @@ -3443,7 +3444,7 @@ static int sxg_fill_descriptor_block(p_adapter_t adapter, RcvDescriptorBlock = (PSXG_RCV_DESCRIPTOR_BLOCK) RcvDescriptorBlockHdr->VirtualAddress; - // Fill in the descriptor block + /* Fill in the descriptor block */ for (i = 0; i < SXG_RCV_DESCRIPTORS_PER_BLOCK; i++) { SXG_GET_RCV_DATA_BUFFER(adapter, RcvDataBufferHdr); ASSERT(RcvDataBufferHdr); @@ -3454,13 +3455,13 @@ static int sxg_fill_descriptor_block(p_adapter_t adapter, RcvDescriptorBlock->Descriptors[i].PhysicalAddress = RcvDataBufferHdr->PhysicalAddress; } - // Add the descriptor block to receive descriptor ring 0 + /* Add the descriptor block to receive descriptor ring 0 */ RingDescriptorCmd->Sgl = RcvDescriptorBlockHdr->PhysicalAddress; - // RcvBuffersOnCard is not protected via the receive lock (see - // sxg_process_event_queue) We don't want to grap a lock every time a - // buffer is returned to us, so we use atomic interlocked functions - // instead. + /* RcvBuffersOnCard is not protected via the receive lock (see */ + /* sxg_process_event_queue) We don't want to grap a lock every time a */ + /* buffer is returned to us, so we use atomic interlocked functions */ + /* instead. */ adapter->RcvBuffersOnCard += SXG_RCV_DESCRIPTORS_PER_BLOCK; SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "DscBlk", @@ -3490,10 +3491,10 @@ static void sxg_stock_rcv_buffers(p_adapter_t adapter) SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "StockBuf", adapter, adapter->RcvBuffersOnCard, adapter->FreeRcvBufferCount, adapter->AllRcvBlockCount); - // First, see if we've got less than our minimum threshold of - // receive buffers, there isn't an allocation in progress, and - // we haven't exceeded our maximum.. get another block of buffers - // None of this needs to be SMP safe. It's round numbers. + /* First, see if we've got less than our minimum threshold of */ + /* receive buffers, there isn't an allocation in progress, and */ + /* we haven't exceeded our maximum.. get another block of buffers */ + /* None of this needs to be SMP safe. It's round numbers. */ if ((adapter->FreeRcvBufferCount < SXG_MIN_RCV_DATA_BUFFERS) && (adapter->AllRcvBlockCount < SXG_MAX_RCV_BLOCKS) && (adapter->AllocationsPending == 0)) { @@ -3502,12 +3503,12 @@ static void sxg_stock_rcv_buffers(p_adapter_t adapter) ReceiveBufferSize), SXG_BUFFER_TYPE_RCV); } - // Now grab the RcvQLock lock and proceed + /* Now grab the RcvQLock lock and proceed */ spin_lock(&adapter->RcvQLock); while (adapter->RcvBuffersOnCard < SXG_RCV_DATA_BUFFERS) { PLIST_ENTRY _ple; - // Get a descriptor block + /* Get a descriptor block */ RcvDescriptorBlockHdr = NULL; if (adapter->FreeRcvBlockCount) { _ple = RemoveHeadList(&adapter->FreeRcvBlocks); @@ -3519,14 +3520,14 @@ static void sxg_stock_rcv_buffers(p_adapter_t adapter) } if (RcvDescriptorBlockHdr == NULL) { - // Bail out.. + /* Bail out.. */ adapter->Stats.NoMem++; break; } - // Fill in the descriptor block and give it to the card + /* Fill in the descriptor block and give it to the card */ if (sxg_fill_descriptor_block(adapter, RcvDescriptorBlockHdr) == STATUS_FAILURE) { - // Free the descriptor block + /* Free the descriptor block */ SXG_FREE_RCV_DESCRIPTOR_BLOCK(adapter, RcvDescriptorBlockHdr); break; @@ -3560,15 +3561,15 @@ static void sxg_complete_descriptor_blocks(p_adapter_t adapter, SXG_TRACE(TRACE_SXG, SxgTraceBuffer, TRACE_NOISY, "CmpRBlks", adapter, Index, RcvRingInfo->Head, RcvRingInfo->Tail); - // Now grab the RcvQLock lock and proceed + /* Now grab the RcvQLock lock and proceed */ spin_lock(&adapter->RcvQLock); ASSERT(Index != RcvRingInfo->Tail); while (RcvRingInfo->Tail != Index) { - // - // Locate the current Cmd (ring descriptor entry), and - // associated receive descriptor block, and advance - // the tail - // + /* */ + /* Locate the current Cmd (ring descriptor entry), and */ + /* associated receive descriptor block, and advance */ + /* the tail */ + /* */ SXG_RETURN_CMD(RingZero, RcvRingInfo, RingDescriptorCmd, RcvDescriptorBlockHdr); @@ -3576,12 +3577,12 @@ static void sxg_complete_descriptor_blocks(p_adapter_t adapter, RcvRingInfo->Head, RcvRingInfo->Tail, RingDescriptorCmd, RcvDescriptorBlockHdr); - // Clear the SGL field + /* Clear the SGL field */ RingDescriptorCmd->Sgl = 0; - // Attempt to refill it and hand it right back to the - // card. If we fail to refill it, free the descriptor block - // header. The card will be restocked later via the - // RcvBuffersOnCard test + /* Attempt to refill it and hand it right back to the */ + /* card. If we fail to refill it, free the descriptor block */ + /* header. The card will be restocked later via the */ + /* RcvBuffersOnCard test */ if (sxg_fill_descriptor_block(adapter, RcvDescriptorBlockHdr) == STATUS_FAILURE) { SXG_FREE_RCV_DESCRIPTOR_BLOCK(adapter, diff --git a/drivers/staging/sxg/sxg_os.h b/drivers/staging/sxg/sxg_os.h index 26fb0ffafa5c..01182689aaba 100644 --- a/drivers/staging/sxg/sxg_os.h +++ b/drivers/staging/sxg/sxg_os.h @@ -44,7 +44,6 @@ #define FALSE (0) #define TRUE (1) - typedef struct _LIST_ENTRY { struct _LIST_ENTRY *nle_flink; struct _LIST_ENTRY *nle_blink; @@ -69,35 +68,32 @@ typedef struct _LIST_ENTRY { /* These two have to be inlined since they return things. */ -static __inline PLIST_ENTRY -RemoveHeadList(list_entry *l) +static __inline PLIST_ENTRY RemoveHeadList(list_entry * l) { - list_entry *f; - list_entry *e; + list_entry *f; + list_entry *e; - e = l->nle_flink; - f = e->nle_flink; - l->nle_flink = f; - f->nle_blink = l; + e = l->nle_flink; + f = e->nle_flink; + l->nle_flink = f; + f->nle_blink = l; - return (e); + return (e); } -static __inline PLIST_ENTRY -RemoveTailList(list_entry *l) +static __inline PLIST_ENTRY RemoveTailList(list_entry * l) { - list_entry *b; - list_entry *e; + list_entry *b; + list_entry *e; - e = l->nle_blink; - b = e->nle_blink; - l->nle_blink = b; - b->nle_flink = l; + e = l->nle_blink; + b = e->nle_blink; + l->nle_blink = b; + b->nle_flink = l; - return (e); + return (e); } - #define InsertTailList(l, e) \ do { \ list_entry *b; \ @@ -120,7 +116,6 @@ RemoveTailList(list_entry *l) (l)->nle_flink = (e); \ } while (0) - #define ATK_DEBUG 1 #if ATK_DEBUG @@ -133,7 +128,6 @@ RemoveTailList(list_entry *l) #define SLIC_TIMESTAMP(value) #endif - /****************** SXG DEFINES *****************************************/ #ifdef ATKDBG @@ -150,5 +144,4 @@ RemoveTailList(list_entry *l) #define WRITE_REG64(a,reg,value,cpu) sxg_reg64_write((a),(®),(value),(cpu)) #define READ_REG(reg,value) (value) = readl((void __iomem *)(®)) -#endif /* _SLIC_OS_SPECIFIC_H_ */ - +#endif /* _SLIC_OS_SPECIFIC_H_ */ diff --git a/drivers/staging/sxg/sxgdbg.h b/drivers/staging/sxg/sxgdbg.h index cfb6c7c77a9e..4522b8d71495 100644 --- a/drivers/staging/sxg/sxgdbg.h +++ b/drivers/staging/sxg/sxgdbg.h @@ -58,7 +58,7 @@ { \ if (!(a)) { \ DBG_ERROR("ASSERT() Failure: file %s, function %s line %d\n",\ - __FILE__, __FUNCTION__, __LINE__); \ + __FILE__, __func__, __LINE__); \ } \ } #endif diff --git a/drivers/staging/sxg/sxghif.h b/drivers/staging/sxg/sxghif.h index ed26ceaa1315..88bffbaa3be8 100644 --- a/drivers/staging/sxg/sxghif.h +++ b/drivers/staging/sxg/sxghif.h @@ -14,119 +14,119 @@ *******************************************************************************/ typedef struct _SXG_UCODE_REGS { // Address 0 - 0x3F = Command codes 0-15 for TCB 0. Excode 0 - u32 Icr; // Code = 0 (extended), ExCode = 0 - Int control - u32 RsvdReg1; // Code = 1 - TOE -NA - u32 RsvdReg2; // Code = 2 - TOE -NA - u32 RsvdReg3; // Code = 3 - TOE -NA - u32 RsvdReg4; // Code = 4 - TOE -NA - u32 RsvdReg5; // Code = 5 - TOE -NA - u32 CardUp; // Code = 6 - Microcode initialized when 1 - u32 RsvdReg7; // Code = 7 - TOE -NA - u32 CodeNotUsed[8]; // Codes 8-15 not used. ExCode = 0 + u32 Icr; // Code = 0 (extended), ExCode = 0 - Int control + u32 RsvdReg1; // Code = 1 - TOE -NA + u32 RsvdReg2; // Code = 2 - TOE -NA + u32 RsvdReg3; // Code = 3 - TOE -NA + u32 RsvdReg4; // Code = 4 - TOE -NA + u32 RsvdReg5; // Code = 5 - TOE -NA + u32 CardUp; // Code = 6 - Microcode initialized when 1 + u32 RsvdReg7; // Code = 7 - TOE -NA + u32 CodeNotUsed[8]; // Codes 8-15 not used. ExCode = 0 // This brings us to ExCode 1 at address 0x40 = Interrupt status pointer - u32 Isp; // Code = 0 (extended), ExCode = 1 - u32 PadEx1[15]; // Codes 1-15 not used with extended codes + u32 Isp; // Code = 0 (extended), ExCode = 1 + u32 PadEx1[15]; // Codes 1-15 not used with extended codes // ExCode 2 = Interrupt Status Register - u32 Isr; // Code = 0 (extended), ExCode = 2 - u32 PadEx2[15]; + u32 Isr; // Code = 0 (extended), ExCode = 2 + u32 PadEx2[15]; // ExCode 3 = Event base register. Location of event rings - u32 EventBase; // Code = 0 (extended), ExCode = 3 - u32 PadEx3[15]; + u32 EventBase; // Code = 0 (extended), ExCode = 3 + u32 PadEx3[15]; // ExCode 4 = Event ring size - u32 EventSize; // Code = 0 (extended), ExCode = 4 - u32 PadEx4[15]; + u32 EventSize; // Code = 0 (extended), ExCode = 4 + u32 PadEx4[15]; // ExCode 5 = TCB Buffers base address - u32 TcbBase; // Code = 0 (extended), ExCode = 5 - u32 PadEx5[15]; + u32 TcbBase; // Code = 0 (extended), ExCode = 5 + u32 PadEx5[15]; // ExCode 6 = TCB Composite Buffers base address - u32 TcbCompBase; // Code = 0 (extended), ExCode = 6 - u32 PadEx6[15]; + u32 TcbCompBase; // Code = 0 (extended), ExCode = 6 + u32 PadEx6[15]; // ExCode 7 = Transmit ring base address - u32 XmtBase; // Code = 0 (extended), ExCode = 7 - u32 PadEx7[15]; + u32 XmtBase; // Code = 0 (extended), ExCode = 7 + u32 PadEx7[15]; // ExCode 8 = Transmit ring size - u32 XmtSize; // Code = 0 (extended), ExCode = 8 - u32 PadEx8[15]; + u32 XmtSize; // Code = 0 (extended), ExCode = 8 + u32 PadEx8[15]; // ExCode 9 = Receive ring base address - u32 RcvBase; // Code = 0 (extended), ExCode = 9 - u32 PadEx9[15]; + u32 RcvBase; // Code = 0 (extended), ExCode = 9 + u32 PadEx9[15]; // ExCode 10 = Receive ring size - u32 RcvSize; // Code = 0 (extended), ExCode = 10 - u32 PadEx10[15]; + u32 RcvSize; // Code = 0 (extended), ExCode = 10 + u32 PadEx10[15]; // ExCode 11 = Read EEPROM Config - u32 Config; // Code = 0 (extended), ExCode = 11 - u32 PadEx11[15]; + u32 Config; // Code = 0 (extended), ExCode = 11 + u32 PadEx11[15]; // ExCode 12 = Multicast bits 31:0 - u32 McastLow; // Code = 0 (extended), ExCode = 12 - u32 PadEx12[15]; + u32 McastLow; // Code = 0 (extended), ExCode = 12 + u32 PadEx12[15]; // ExCode 13 = Multicast bits 63:32 - u32 McastHigh; // Code = 0 (extended), ExCode = 13 - u32 PadEx13[15]; + u32 McastHigh; // Code = 0 (extended), ExCode = 13 + u32 PadEx13[15]; // ExCode 14 = Ping - u32 Ping; // Code = 0 (extended), ExCode = 14 - u32 PadEx14[15]; + u32 Ping; // Code = 0 (extended), ExCode = 14 + u32 PadEx14[15]; // ExCode 15 = Link MTU - u32 LinkMtu; // Code = 0 (extended), ExCode = 15 - u32 PadEx15[15]; + u32 LinkMtu; // Code = 0 (extended), ExCode = 15 + u32 PadEx15[15]; // ExCode 16 = Download synchronization - u32 LoadSync; // Code = 0 (extended), ExCode = 16 - u32 PadEx16[15]; + u32 LoadSync; // Code = 0 (extended), ExCode = 16 + u32 PadEx16[15]; // ExCode 17 = Upper DRAM address bits on 32-bit systems - u32 Upper; // Code = 0 (extended), ExCode = 17 - u32 PadEx17[15]; + u32 Upper; // Code = 0 (extended), ExCode = 17 + u32 PadEx17[15]; // ExCode 18 = Slowpath Send Index Address - u32 SPSendIndex; // Code = 0 (extended), ExCode = 18 - u32 PadEx18[15]; - u32 RsvdXF; // Code = 0 (extended), ExCode = 19 - u32 PadEx19[15]; + u32 SPSendIndex; // Code = 0 (extended), ExCode = 18 + u32 PadEx18[15]; + u32 RsvdXF; // Code = 0 (extended), ExCode = 19 + u32 PadEx19[15]; // ExCode 20 = Aggregation - u32 Aggregation; // Code = 0 (extended), ExCode = 20 - u32 PadEx20[15]; + u32 Aggregation; // Code = 0 (extended), ExCode = 20 + u32 PadEx20[15]; // ExCode 21 = Receive MDL push timer - u32 PushTicks; // Code = 0 (extended), ExCode = 21 - u32 PadEx21[15]; + u32 PushTicks; // Code = 0 (extended), ExCode = 21 + u32 PadEx21[15]; // ExCode 22 = TOE NA - u32 AckFrequency; // Code = 0 (extended), ExCode = 22 - u32 PadEx22[15]; + u32 AckFrequency; // Code = 0 (extended), ExCode = 22 + u32 PadEx22[15]; // ExCode 23 = TOE NA - u32 RsvdReg23; - u32 PadEx23[15]; + u32 RsvdReg23; + u32 PadEx23[15]; // ExCode 24 = TOE NA - u32 RsvdReg24; - u32 PadEx24[15]; + u32 RsvdReg24; + u32 PadEx24[15]; // ExCode 25 = TOE NA - u32 RsvdReg25; // Code = 0 (extended), ExCode = 25 - u32 PadEx25[15]; + u32 RsvdReg25; // Code = 0 (extended), ExCode = 25 + u32 PadEx25[15]; // ExCode 26 = Receive checksum requirements - u32 ReceiveChecksum; // Code = 0 (extended), ExCode = 26 - u32 PadEx26[15]; + u32 ReceiveChecksum; // Code = 0 (extended), ExCode = 26 + u32 PadEx26[15]; // ExCode 27 = RSS Requirements - u32 Rss; // Code = 0 (extended), ExCode = 27 - u32 PadEx27[15]; + u32 Rss; // Code = 0 (extended), ExCode = 27 + u32 PadEx27[15]; // ExCode 28 = RSS Table - u32 RssTable; // Code = 0 (extended), ExCode = 28 - u32 PadEx28[15]; + u32 RssTable; // Code = 0 (extended), ExCode = 28 + u32 PadEx28[15]; // ExCode 29 = Event ring release entries - u32 EventRelease; // Code = 0 (extended), ExCode = 29 - u32 PadEx29[15]; + u32 EventRelease; // Code = 0 (extended), ExCode = 29 + u32 PadEx29[15]; // ExCode 30 = Number of receive bufferlist commands on ring 0 - u32 RcvCmd; // Code = 0 (extended), ExCode = 30 - u32 PadEx30[15]; + u32 RcvCmd; // Code = 0 (extended), ExCode = 30 + u32 PadEx30[15]; // ExCode 31 = slowpath transmit command - Data[31:0] = 1 - u32 XmtCmd; // Code = 0 (extended), ExCode = 31 - u32 PadEx31[15]; + u32 XmtCmd; // Code = 0 (extended), ExCode = 31 + u32 PadEx31[15]; // ExCode 32 = Dump command - u32 DumpCmd; // Code = 0 (extended), ExCode = 32 - u32 PadEx32[15]; + u32 DumpCmd; // Code = 0 (extended), ExCode = 32 + u32 PadEx32[15]; // ExCode 33 = Debug command - u32 DebugCmd; // Code = 0 (extended), ExCode = 33 - u32 PadEx33[15]; + u32 DebugCmd; // Code = 0 (extended), ExCode = 33 + u32 PadEx33[15]; // There are 128 possible extended commands - each of account for 16 // words (including the non-relevent base command codes 1-15). // Pad for the remainder of these here to bring us to the next CPU // base. As extended codes are added, reduce the first array value in // the following field - u32 PadToNextCpu[94][16]; // 94 = 128 - 34 (34 = Excodes 0 - 33) + u32 PadToNextCpu[94][16]; // 94 = 128 - 34 (34 = Excodes 0 - 33) } SXG_UCODE_REGS, *PSXG_UCODE_REGS; // Interrupt control register (0) values @@ -141,7 +141,7 @@ typedef struct _SXG_UCODE_REGS { // The Microcode supports up to 16 RSS queues #define SXG_MAX_RSS 16 -#define SXG_MAX_RSS_TABLE_SIZE 256 // 256-byte max +#define SXG_MAX_RSS_TABLE_SIZE 256 // 256-byte max #define SXG_RSS_TCP6 0x00000001 // RSS TCP over IPv6 #define SXG_RSS_TCP4 0x00000002 // RSS TCP over IPv4 @@ -170,16 +170,16 @@ typedef struct _SXG_UCODE_REGS { * SXG_UCODE_REGS definition above */ typedef struct _SXG_TCB_REGS { - u32 ExCode; /* Extended codes - see SXG_UCODE_REGS */ - u32 Xmt; /* Code = 1 - # of Xmt descriptors added to ring */ - u32 Rcv; /* Code = 2 - # of Rcv descriptors added to ring */ - u32 Rsvd1; /* Code = 3 - TOE NA */ - u32 Rsvd2; /* Code = 4 - TOE NA */ - u32 Rsvd3; /* Code = 5 - TOE NA */ - u32 Invalid; /* Code = 6 - Reserved for "CardUp" see above */ - u32 Rsvd4; /* Code = 7 - TOE NA */ - u32 Rsvd5; /* Code = 8 - TOE NA */ - u32 Pad[7]; /* Codes 8-15 - Not used. */ + u32 ExCode; /* Extended codes - see SXG_UCODE_REGS */ + u32 Xmt; /* Code = 1 - # of Xmt descriptors added to ring */ + u32 Rcv; /* Code = 2 - # of Rcv descriptors added to ring */ + u32 Rsvd1; /* Code = 3 - TOE NA */ + u32 Rsvd2; /* Code = 4 - TOE NA */ + u32 Rsvd3; /* Code = 5 - TOE NA */ + u32 Invalid; /* Code = 6 - Reserved for "CardUp" see above */ + u32 Rsvd4; /* Code = 7 - TOE NA */ + u32 Rsvd5; /* Code = 8 - TOE NA */ + u32 Pad[7]; /* Codes 8-15 - Not used. */ } SXG_TCB_REGS, *PSXG_TCB_REGS; /*************************************************************************** @@ -273,27 +273,27 @@ typedef struct _SXG_TCB_REGS { */ #pragma pack(push, 1) typedef struct _SXG_EVENT { - u32 Pad[1]; // not used - u32 SndUna; // SndUna value - u32 Resid; // receive MDL resid + u32 Pad[1]; // not used + u32 SndUna; // SndUna value + u32 Resid; // receive MDL resid union { - void * HostHandle; // Receive host handle - u32 Rsvd1; // TOE NA + void *HostHandle; // Receive host handle + u32 Rsvd1; // TOE NA struct { - u32 NotUsed; - u32 Rsvd2; // TOE NA + u32 NotUsed; + u32 Rsvd2; // TOE NA } Flush; }; - u32 Toeplitz; // RSS Toeplitz hash + u32 Toeplitz; // RSS Toeplitz hash union { - ushort Rsvd3; // TOE NA - ushort HdrOffset; // Slowpath + ushort Rsvd3; // TOE NA + ushort HdrOffset; // Slowpath }; - ushort Length; // - unsigned char Rsvd4; // TOE NA - unsigned char Code; // Event code - unsigned char CommandIndex; // New ring index - unsigned char Status; // Event status + ushort Length; // + unsigned char Rsvd4; // TOE NA + unsigned char Code; // Event code + unsigned char CommandIndex; // New ring index + unsigned char Status; // Event status } SXG_EVENT, *PSXG_EVENT; #pragma pack(pop) @@ -318,12 +318,12 @@ typedef struct _SXG_EVENT { // Event ring // Size must be power of 2, between 128 and 16k #define EVENT_RING_SIZE 4096 // ?? -#define EVENT_RING_BATCH 16 // Hand entries back 16 at a time. -#define EVENT_BATCH_LIMIT 256 // Stop processing events after 256 (16 * 16) +#define EVENT_RING_BATCH 16 // Hand entries back 16 at a time. +#define EVENT_BATCH_LIMIT 256 // Stop processing events after 256 (16 * 16) typedef struct _SXG_EVENT_RING { - SXG_EVENT Ring[EVENT_RING_SIZE]; -}SXG_EVENT_RING, *PSXG_EVENT_RING; + SXG_EVENT Ring[EVENT_RING_SIZE]; +} SXG_EVENT_RING, *PSXG_EVENT_RING; /*************************************************************************** * @@ -341,7 +341,7 @@ typedef struct _SXG_EVENT_RING { #define SXG_TCB_PER_BUCKET 16 #define SXG_TCB_BUCKET_MASK 0xFF0 // Bucket portion of TCB ID #define SXG_TCB_ELEMENT_MASK 0x00F // Element within bucket -#define SXG_TCB_BUCKETS 256 // 256 * 16 = 4k +#define SXG_TCB_BUCKETS 256 // 256 * 16 = 4k #define SXG_TCB_BUFFER_SIZE 512 // ASSERT format is correct @@ -368,7 +368,6 @@ typedef struct _SXG_EVENT_RING { &(_TcpObject)->CompBuffer->Frame.HasVlan.TcpIp6.Ip : \ &(_TcpObject)->CompBuffer->Frame.NoVlan.TcpIp6.Ip - #if DBG // Horrible kludge to distinguish dumb-nic, slowpath, and // fastpath traffic. Decrement the HopLimit by one @@ -396,16 +395,16 @@ typedef struct _SXG_EVENT_RING { * Receive and transmit rings ***************************************************************************/ #define SXG_MAX_RING_SIZE 256 -#define SXG_XMT_RING_SIZE 128 // Start with 128 -#define SXG_RCV_RING_SIZE 128 // Start with 128 +#define SXG_XMT_RING_SIZE 128 // Start with 128 +#define SXG_RCV_RING_SIZE 128 // Start with 128 #define SXG_MAX_ENTRIES 4096 // Structure and macros to manage a ring typedef struct _SXG_RING_INFO { - unsigned char Head; // Where we add entries - Note unsigned char:RING_SIZE - unsigned char Tail; // Where we pull off completed entries - ushort Size; // Ring size - Must be multiple of 2 - void * Context[SXG_MAX_RING_SIZE]; // Shadow ring + unsigned char Head; // Where we add entries - Note unsigned char:RING_SIZE + unsigned char Tail; // Where we pull off completed entries + ushort Size; // Ring size - Must be multiple of 2 + void *Context[SXG_MAX_RING_SIZE]; // Shadow ring } SXG_RING_INFO, *PSXG_RING_INFO; #define SXG_INITIALIZE_RING(_ring, _size) { \ @@ -483,40 +482,40 @@ typedef struct _SXG_RING_INFO { */ #pragma pack(push, 1) typedef struct _SXG_CMD { - dma_addr_t Sgl; // Physical address of SGL + dma_addr_t Sgl; // Physical address of SGL union { struct { - dma64_addr_t FirstSgeAddress;// Address of first SGE - u32 FirstSgeLength; // Length of first SGE + dma64_addr_t FirstSgeAddress; // Address of first SGE + u32 FirstSgeLength; // Length of first SGE union { - u32 Rsvd1; // TOE NA - u32 SgeOffset; // Slowpath - 2nd SGE offset - u32 Resid; // MDL completion - clobbers update + u32 Rsvd1; // TOE NA + u32 SgeOffset; // Slowpath - 2nd SGE offset + u32 Resid; // MDL completion - clobbers update }; union { - u32 TotalLength; // Total transfer length - u32 Mss; // LSO MSS + u32 TotalLength; // Total transfer length + u32 Mss; // LSO MSS }; } Buffer; }; union { struct { - unsigned char Flags:4; // slowpath flags - unsigned char IpHl:4; // Ip header length (>>2) - unsigned char MacLen; // Mac header len + unsigned char Flags:4; // slowpath flags + unsigned char IpHl:4; // Ip header length (>>2) + unsigned char MacLen; // Mac header len } CsumFlags; struct { - ushort Flags:4; // slowpath flags - ushort TcpHdrOff:7; // TCP - ushort MacLen:5; // Mac header len + ushort Flags:4; // slowpath flags + ushort TcpHdrOff:7; // TCP + ushort MacLen:5; // Mac header len } LsoFlags; - ushort Flags; // flags + ushort Flags; // flags }; union { - ushort SgEntries; // SG entry count including first sge + ushort SgEntries; // SG entry count including first sge struct { - unsigned char Status; // Copied from event status - unsigned char NotUsed; + unsigned char Status; // Copied from event status + unsigned char NotUsed; } Status; }; } SXG_CMD, *PSXG_CMD; @@ -524,8 +523,8 @@ typedef struct _SXG_CMD { #pragma pack(push, 1) typedef struct _VLAN_HDR { - ushort VlanTci; - ushort VlanTpid; + ushort VlanTci; + ushort VlanTpid; } VLAN_HDR, *PVLAN_HDR; #pragma pack(pop) @@ -561,16 +560,16 @@ typedef struct _VLAN_HDR { * */ // Slowpath CMD flags -#define SXG_SLOWCMD_CSUM_IP 0x01 // Checksum IP -#define SXG_SLOWCMD_CSUM_TCP 0x02 // Checksum TCP -#define SXG_SLOWCMD_LSO 0x04 // Large segment send +#define SXG_SLOWCMD_CSUM_IP 0x01 // Checksum IP +#define SXG_SLOWCMD_CSUM_TCP 0x02 // Checksum TCP +#define SXG_SLOWCMD_LSO 0x04 // Large segment send typedef struct _SXG_XMT_RING { - SXG_CMD Descriptors[SXG_XMT_RING_SIZE]; + SXG_CMD Descriptors[SXG_XMT_RING_SIZE]; } SXG_XMT_RING, *PSXG_XMT_RING; typedef struct _SXG_RCV_RING { - SXG_CMD Descriptors[SXG_RCV_RING_SIZE]; + SXG_CMD Descriptors[SXG_RCV_RING_SIZE]; } SXG_RCV_RING, *PSXG_RCV_RING; /*************************************************************************** @@ -578,8 +577,8 @@ typedef struct _SXG_RCV_RING { * shared memory allocation ***************************************************************************/ typedef enum { - SXG_BUFFER_TYPE_RCV, // Receive buffer - SXG_BUFFER_TYPE_SGL // SGL buffer + SXG_BUFFER_TYPE_RCV, // Receive buffer + SXG_BUFFER_TYPE_SGL // SGL buffer } SXG_BUFFER_TYPE; // State for SXG buffers @@ -668,60 +667,60 @@ typedef enum { #define SXG_RCV_DATA_BUFFERS 4096 // Amount to give to the card #define SXG_INITIAL_RCV_DATA_BUFFERS 8192 // Initial pool of buffers #define SXG_MIN_RCV_DATA_BUFFERS 2048 // Minimum amount and when to get more -#define SXG_MAX_RCV_BLOCKS 128 // = 16384 receive buffers +#define SXG_MAX_RCV_BLOCKS 128 // = 16384 receive buffers // Receive buffer header typedef struct _SXG_RCV_DATA_BUFFER_HDR { - dma_addr_t PhysicalAddress; // Buffer physical address + dma_addr_t PhysicalAddress; // Buffer physical address // Note - DO NOT USE the VirtualAddress field to locate data. // Use the sxg.h:SXG_RECEIVE_DATA_LOCATION macro instead. - void *VirtualAddress; // Start of buffer - LIST_ENTRY FreeList; // Free queue of buffers - struct _SXG_RCV_DATA_BUFFER_HDR *Next; // Fastpath data buffer queue - u32 Size; // Buffer size - u32 ByteOffset; // See SXG_RESTORE_MDL_OFFSET - unsigned char State; // See SXG_BUFFER state above - unsigned char Status; // Event status (to log PUSH) - struct sk_buff * skb; // Double mapped (nbl and pkt) + void *VirtualAddress; // Start of buffer + LIST_ENTRY FreeList; // Free queue of buffers + struct _SXG_RCV_DATA_BUFFER_HDR *Next; // Fastpath data buffer queue + u32 Size; // Buffer size + u32 ByteOffset; // See SXG_RESTORE_MDL_OFFSET + unsigned char State; // See SXG_BUFFER state above + unsigned char Status; // Event status (to log PUSH) + struct sk_buff *skb; // Double mapped (nbl and pkt) } SXG_RCV_DATA_BUFFER_HDR, *PSXG_RCV_DATA_BUFFER_HDR; // SxgSlowReceive uses the PACKET (skb) contained // in the SXG_RCV_DATA_BUFFER_HDR when indicating dumb-nic data #define SxgDumbRcvPacket skb -#define SXG_RCV_DATA_HDR_SIZE 256 // Space for SXG_RCV_DATA_BUFFER_HDR +#define SXG_RCV_DATA_HDR_SIZE 256 // Space for SXG_RCV_DATA_BUFFER_HDR #define SXG_RCV_DATA_BUFFER_SIZE 2048 // Non jumbo = 2k including HDR #define SXG_RCV_JUMBO_BUFFER_SIZE 10240 // jumbo = 10k including HDR // Receive data descriptor typedef struct _SXG_RCV_DATA_DESCRIPTOR { union { - struct sk_buff * VirtualAddress; // Host handle - u64 ForceTo8Bytes; // Force x86 to 8-byte boundary + struct sk_buff *VirtualAddress; // Host handle + u64 ForceTo8Bytes; // Force x86 to 8-byte boundary }; - dma_addr_t PhysicalAddress; + dma_addr_t PhysicalAddress; } SXG_RCV_DATA_DESCRIPTOR, *PSXG_RCV_DATA_DESCRIPTOR; // Receive descriptor block #define SXG_RCV_DESCRIPTORS_PER_BLOCK 128 #define SXG_RCV_DESCRIPTOR_BLOCK_SIZE 2048 // For sanity check typedef struct _SXG_RCV_DESCRIPTOR_BLOCK { - SXG_RCV_DATA_DESCRIPTOR Descriptors[SXG_RCV_DESCRIPTORS_PER_BLOCK]; + SXG_RCV_DATA_DESCRIPTOR Descriptors[SXG_RCV_DESCRIPTORS_PER_BLOCK]; } SXG_RCV_DESCRIPTOR_BLOCK, *PSXG_RCV_DESCRIPTOR_BLOCK; // Receive descriptor block header typedef struct _SXG_RCV_DESCRIPTOR_BLOCK_HDR { - void * VirtualAddress; // Start of 2k buffer - dma_addr_t PhysicalAddress; // ..and it's physical address - LIST_ENTRY FreeList; // Free queue of descriptor blocks - unsigned char State; // See SXG_BUFFER state above + void *VirtualAddress; // Start of 2k buffer + dma_addr_t PhysicalAddress; // ..and it's physical address + LIST_ENTRY FreeList; // Free queue of descriptor blocks + unsigned char State; // See SXG_BUFFER state above } SXG_RCV_DESCRIPTOR_BLOCK_HDR, *PSXG_RCV_DESCRIPTOR_BLOCK_HDR; // Receive block header typedef struct _SXG_RCV_BLOCK_HDR { - void * VirtualAddress; // Start of virtual memory - dma_addr_t PhysicalAddress; // ..and it's physical address - LIST_ENTRY AllList; // Queue of all SXG_RCV_BLOCKS + void *VirtualAddress; // Start of virtual memory + dma_addr_t PhysicalAddress; // ..and it's physical address + LIST_ENTRY AllList; // Queue of all SXG_RCV_BLOCKS } SXG_RCV_BLOCK_HDR, *PSXG_RCV_BLOCK_HDR; // Macros to determine data structure offsets into receive block @@ -747,8 +746,8 @@ typedef struct _SXG_RCV_BLOCK_HDR { // Use the miniport reserved portion of the NBL to locate // our SXG_RCV_DATA_BUFFER_HDR structure. typedef struct _SXG_RCV_NBL_RESERVED { - PSXG_RCV_DATA_BUFFER_HDR RcvDataBufferHdr; - void * Available; + PSXG_RCV_DATA_BUFFER_HDR RcvDataBufferHdr; + void *Available; } SXG_RCV_NBL_RESERVED, *PSXG_RCV_NBL_RESERVED; #define SXG_RCV_NBL_BUFFER_HDR(_NBL) (((PSXG_RCV_NBL_RESERVED)NET_BUFFER_LIST_MINIPORT_RESERVED(_NBL))->RcvDataBufferHdr) @@ -760,12 +759,11 @@ typedef struct _SXG_RCV_NBL_RESERVED { #define SXG_MIN_SGL_BUFFERS 2048 // Minimum amount and when to get more #define SXG_MAX_SGL_BUFFERS 16384 // Maximum to allocate (note ADAPT:ushort) - // Self identifying structure type typedef enum _SXG_SGL_TYPE { - SXG_SGL_DUMB, // Dumb NIC SGL - SXG_SGL_SLOW, // Slowpath protocol header - see below - SXG_SGL_CHIMNEY // Chimney offload SGL + SXG_SGL_DUMB, // Dumb NIC SGL + SXG_SGL_SLOW, // Slowpath protocol header - see below + SXG_SGL_CHIMNEY // Chimney offload SGL } SXG_SGL_TYPE, PSXG_SGL_TYPE; // Note - the description below is Microsoft specific @@ -774,14 +772,14 @@ typedef enum _SXG_SGL_TYPE { // for the SCATTER_GATHER_LIST portion of the SXG_SCATTER_GATHER data structure. // The following considerations apply when setting this value: // - First, the Sahara card is designed to read the Microsoft SGL structure -// straight out of host memory. This means that the SGL must reside in -// shared memory. If the length here is smaller than the SGL for the -// NET_BUFFER, then NDIS will allocate its own buffer. The buffer -// that NDIS allocates is not in shared memory, so when this happens, -// the SGL will need to be copied to a set of SXG_SCATTER_GATHER buffers. -// In other words.. we don't want this value to be too small. +// straight out of host memory. This means that the SGL must reside in +// shared memory. If the length here is smaller than the SGL for the +// NET_BUFFER, then NDIS will allocate its own buffer. The buffer +// that NDIS allocates is not in shared memory, so when this happens, +// the SGL will need to be copied to a set of SXG_SCATTER_GATHER buffers. +// In other words.. we don't want this value to be too small. // - On the other hand.. we're allocating up to 16k of these things. If -// we make this too big, we start to consume a ton of memory.. +// we make this too big, we start to consume a ton of memory.. // At the moment, I'm going to limit the number of SG entries to 150. // If each entry maps roughly 4k, then this should cover roughly 600kB // NET_BUFFERs. Furthermore, since each entry is 24 bytes, the total @@ -801,24 +799,23 @@ typedef enum _SXG_SGL_TYPE { // the SGL. The following structure defines an x64 // formatted SGL entry typedef struct _SXG_X64_SGE { - dma64_addr_t Address; // same as wdm.h - u32 Length; // same as wdm.h - u32 CompilerPad;// The compiler pads to 8-bytes - u64 Reserved; // u32 * in wdm.h. Force to 8 bytes + dma64_addr_t Address; // same as wdm.h + u32 Length; // same as wdm.h + u32 CompilerPad; // The compiler pads to 8-bytes + u64 Reserved; // u32 * in wdm.h. Force to 8 bytes } SXG_X64_SGE, *PSXG_X64_SGE; typedef struct _SCATTER_GATHER_ELEMENT { - dma64_addr_t Address; // same as wdm.h - u32 Length; // same as wdm.h - u32 CompilerPad;// The compiler pads to 8-bytes - u64 Reserved; // u32 * in wdm.h. Force to 8 bytes + dma64_addr_t Address; // same as wdm.h + u32 Length; // same as wdm.h + u32 CompilerPad; // The compiler pads to 8-bytes + u64 Reserved; // u32 * in wdm.h. Force to 8 bytes } SCATTER_GATHER_ELEMENT, *PSCATTER_GATHER_ELEMENT; - typedef struct _SCATTER_GATHER_LIST { - u32 NumberOfElements; - u32 * Reserved; - SCATTER_GATHER_ELEMENT Elements[]; + u32 NumberOfElements; + u32 *Reserved; + SCATTER_GATHER_ELEMENT Elements[]; } SCATTER_GATHER_LIST, *PSCATTER_GATHER_LIST; // The card doesn't care about anything except elements, so @@ -826,26 +823,26 @@ typedef struct _SCATTER_GATHER_LIST { // SGL structure. But redefine from wdm.h:SCATTER_GATHER_LIST so // we can specify SXG_X64_SGE and define a fixed number of elements typedef struct _SXG_X64_SGL { - u32 NumberOfElements; - u32 * Reserved; - SXG_X64_SGE Elements[SXG_SGL_ENTRIES]; + u32 NumberOfElements; + u32 *Reserved; + SXG_X64_SGE Elements[SXG_SGL_ENTRIES]; } SXG_X64_SGL, *PSXG_X64_SGL; typedef struct _SXG_SCATTER_GATHER { - SXG_SGL_TYPE Type; // FIRST! Dumb-nic or offload - void * adapter; // Back pointer to adapter - LIST_ENTRY FreeList; // Free SXG_SCATTER_GATHER blocks - LIST_ENTRY AllList; // All SXG_SCATTER_GATHER blocks - dma_addr_t PhysicalAddress;// physical address - unsigned char State; // See SXG_BUFFER state above - unsigned char CmdIndex; // Command ring index - struct sk_buff * DumbPacket; // Associated Packet - u32 Direction; // For asynchronous completions - u32 CurOffset; // Current SGL offset - u32 SglRef; // SGL reference count - VLAN_HDR VlanTag; // VLAN tag to be inserted into SGL - PSCATTER_GATHER_LIST pSgl; // SGL Addr. Possibly &Sgl - SXG_X64_SGL Sgl; // SGL handed to card + SXG_SGL_TYPE Type; // FIRST! Dumb-nic or offload + void *adapter; // Back pointer to adapter + LIST_ENTRY FreeList; // Free SXG_SCATTER_GATHER blocks + LIST_ENTRY AllList; // All SXG_SCATTER_GATHER blocks + dma_addr_t PhysicalAddress; // physical address + unsigned char State; // See SXG_BUFFER state above + unsigned char CmdIndex; // Command ring index + struct sk_buff *DumbPacket; // Associated Packet + u32 Direction; // For asynchronous completions + u32 CurOffset; // Current SGL offset + u32 SglRef; // SGL reference count + VLAN_HDR VlanTag; // VLAN tag to be inserted into SGL + PSCATTER_GATHER_LIST pSgl; // SGL Addr. Possibly &Sgl + SXG_X64_SGL Sgl; // SGL handed to card } SXG_SCATTER_GATHER, *PSXG_SCATTER_GATHER; #if defined(CONFIG_X86_64) @@ -856,6 +853,5 @@ typedef struct _SXG_SCATTER_GATHER { #define SXG_SGL_BUFFER(_SxgSgl) NULL #define SXG_SGL_BUF_SIZE 0 #else - Stop Compilation; +Stop Compilation; #endif - diff --git a/drivers/staging/sxg/sxghw.h b/drivers/staging/sxg/sxghw.h index 8f4f6effdd98..2222ae91fd97 100644 --- a/drivers/staging/sxg/sxghw.h +++ b/drivers/staging/sxg/sxghw.h @@ -13,11 +13,11 @@ /******************************************************************************* * Configuration space *******************************************************************************/ -// PCI Vendor ID -#define SXG_VENDOR_ID 0x139A // Alacritech's Vendor ID +/* PCI Vendor ID */ +#define SXG_VENDOR_ID 0x139A /* Alacritech's Vendor ID */ // PCI Device ID -#define SXG_DEVICE_ID 0x0009 // Sahara Device ID +#define SXG_DEVICE_ID 0x0009 /* Sahara Device ID */ // // Subsystem IDs. @@ -141,7 +141,7 @@ typedef struct _SXG_HW_REGS { #define SXG_REGISTER_SIZE_PER_CPU 0x00002000 // Used to sanity check UCODE_REGS structure // Sahara receive sequencer status values -#define SXG_RCV_STATUS_ATTN 0x80000000 // Attention +#define SXG_RCV_STATUS_ATTN 0x80000000 // Attention #define SXG_RCV_STATUS_TRANSPORT_MASK 0x3F000000 // Transport mask #define SXG_RCV_STATUS_TRANSPORT_ERROR 0x20000000 // Transport error #define SXG_RCV_STATUS_TRANSPORT_CSUM 0x23000000 // Transport cksum error @@ -156,9 +156,9 @@ typedef struct _SXG_HW_REGS { #define SXG_RCV_STATUS_TRANSPORT_FTP 0x03000000 // Transport FTP #define SXG_RCV_STATUS_TRANSPORT_HTTP 0x02000000 // Transport HTTP #define SXG_RCV_STATUS_TRANSPORT_SMB 0x01000000 // Transport SMB -#define SXG_RCV_STATUS_NETWORK_MASK 0x00FF0000 // Network mask +#define SXG_RCV_STATUS_NETWORK_MASK 0x00FF0000 // Network mask #define SXG_RCV_STATUS_NETWORK_ERROR 0x00800000 // Network error -#define SXG_RCV_STATUS_NETWORK_CSUM 0x00830000 // Network cksum error +#define SXG_RCV_STATUS_NETWORK_CSUM 0x00830000 // Network cksum error #define SXG_RCV_STATUS_NETWORK_UFLOW 0x00820000 // Network underflow error #define SXG_RCV_STATUS_NETWORK_HDRLEN 0x00800000 // Network header length #define SXG_RCV_STATUS_NETWORK_OFLOW 0x00400000 // Network overflow detected @@ -167,67 +167,67 @@ typedef struct _SXG_HW_REGS { #define SXG_RCV_STATUS_NETWORK_OFFSET 0x00080000 // Network offset detected #define SXG_RCV_STATUS_NETWORK_FRAGMENT 0x00040000 // Network fragment detected #define SXG_RCV_STATUS_NETWORK_TRANS_MASK 0x00030000 // Network transport type mask -#define SXG_RCV_STATUS_NETWORK_UDP 0x00020000 // UDP -#define SXG_RCV_STATUS_NETWORK_TCP 0x00010000 // TCP -#define SXG_RCV_STATUS_IPONLY 0x00008000 // IP-only not TCP -#define SXG_RCV_STATUS_PKT_PRI 0x00006000 // Receive priority -#define SXG_RCV_STATUS_PKT_PRI_SHFT 13 // Receive priority shift -#define SXG_RCV_STATUS_PARITY 0x00001000 // MAC Receive RAM parity error -#define SXG_RCV_STATUS_ADDRESS_MASK 0x00000F00 // Link address detection mask -#define SXG_RCV_STATUS_ADDRESS_D 0x00000B00 // Link address D -#define SXG_RCV_STATUS_ADDRESS_C 0x00000A00 // Link address C -#define SXG_RCV_STATUS_ADDRESS_B 0x00000900 // Link address B -#define SXG_RCV_STATUS_ADDRESS_A 0x00000800 // Link address A +#define SXG_RCV_STATUS_NETWORK_UDP 0x00020000 // UDP +#define SXG_RCV_STATUS_NETWORK_TCP 0x00010000 // TCP +#define SXG_RCV_STATUS_IPONLY 0x00008000 // IP-only not TCP +#define SXG_RCV_STATUS_PKT_PRI 0x00006000 // Receive priority +#define SXG_RCV_STATUS_PKT_PRI_SHFT 13 // Receive priority shift +#define SXG_RCV_STATUS_PARITY 0x00001000 // MAC Receive RAM parity error +#define SXG_RCV_STATUS_ADDRESS_MASK 0x00000F00 // Link address detection mask +#define SXG_RCV_STATUS_ADDRESS_D 0x00000B00 // Link address D +#define SXG_RCV_STATUS_ADDRESS_C 0x00000A00 // Link address C +#define SXG_RCV_STATUS_ADDRESS_B 0x00000900 // Link address B +#define SXG_RCV_STATUS_ADDRESS_A 0x00000800 // Link address A #define SXG_RCV_STATUS_ADDRESS_BCAST 0x00000300 // Link address broadcast #define SXG_RCV_STATUS_ADDRESS_MCAST 0x00000200 // Link address multicast #define SXG_RCV_STATUS_ADDRESS_CMCAST 0x00000100 // Link control multicast -#define SXG_RCV_STATUS_LINK_MASK 0x000000FF // Link status mask -#define SXG_RCV_STATUS_LINK_ERROR 0x00000080 // Link error -#define SXG_RCV_STATUS_LINK_MASK 0x000000FF // Link status mask -#define SXG_RCV_STATUS_LINK_PARITY 0x00000087 // RcvMacQ parity error -#define SXG_RCV_STATUS_LINK_EARLY 0x00000086 // Data early +#define SXG_RCV_STATUS_LINK_MASK 0x000000FF // Link status mask +#define SXG_RCV_STATUS_LINK_ERROR 0x00000080 // Link error +#define SXG_RCV_STATUS_LINK_MASK 0x000000FF // Link status mask +#define SXG_RCV_STATUS_LINK_PARITY 0x00000087 // RcvMacQ parity error +#define SXG_RCV_STATUS_LINK_EARLY 0x00000086 // Data early #define SXG_RCV_STATUS_LINK_BUFOFLOW 0x00000085 // Buffer overflow -#define SXG_RCV_STATUS_LINK_CODE 0x00000084 // Link code error -#define SXG_RCV_STATUS_LINK_DRIBBLE 0x00000083 // Dribble nibble -#define SXG_RCV_STATUS_LINK_CRC 0x00000082 // CRC error -#define SXG_RCV_STATUS_LINK_OFLOW 0x00000081 // Link overflow -#define SXG_RCV_STATUS_LINK_UFLOW 0x00000080 // Link underflow -#define SXG_RCV_STATUS_LINK_8023 0x00000020 // 802.3 -#define SXG_RCV_STATUS_LINK_SNAP 0x00000010 // Snap -#define SXG_RCV_STATUS_LINK_VLAN 0x00000008 // VLAN +#define SXG_RCV_STATUS_LINK_CODE 0x00000084 // Link code error +#define SXG_RCV_STATUS_LINK_DRIBBLE 0x00000083 // Dribble nibble +#define SXG_RCV_STATUS_LINK_CRC 0x00000082 // CRC error +#define SXG_RCV_STATUS_LINK_OFLOW 0x00000081 // Link overflow +#define SXG_RCV_STATUS_LINK_UFLOW 0x00000080 // Link underflow +#define SXG_RCV_STATUS_LINK_8023 0x00000020 // 802.3 +#define SXG_RCV_STATUS_LINK_SNAP 0x00000010 // Snap +#define SXG_RCV_STATUS_LINK_VLAN 0x00000008 // VLAN #define SXG_RCV_STATUS_LINK_TYPE_MASK 0x00000007 // Network type mask -#define SXG_RCV_STATUS_LINK_CONTROL 0x00000003 // Control packet -#define SXG_RCV_STATUS_LINK_IPV6 0x00000002 // IPv6 packet -#define SXG_RCV_STATUS_LINK_IPV4 0x00000001 // IPv4 packet +#define SXG_RCV_STATUS_LINK_CONTROL 0x00000003 // Control packet +#define SXG_RCV_STATUS_LINK_IPV6 0x00000002 // IPv6 packet +#define SXG_RCV_STATUS_LINK_IPV4 0x00000001 // IPv4 packet /*************************************************************************** * Sahara receive and transmit configuration registers ***************************************************************************/ -#define RCV_CONFIG_RESET 0x80000000 // RcvConfig register reset -#define RCV_CONFIG_ENABLE 0x40000000 // Enable the receive logic -#define RCV_CONFIG_ENPARSE 0x20000000 // Enable the receive parser -#define RCV_CONFIG_SOCKET 0x10000000 // Enable the socket detector -#define RCV_CONFIG_RCVBAD 0x08000000 // Receive all bad frames -#define RCV_CONFIG_CONTROL 0x04000000 // Receive all control frames -#define RCV_CONFIG_RCVPAUSE 0x02000000 // Enable pause transmit when attn -#define RCV_CONFIG_TZIPV6 0x01000000 // Include TCP port w/ IPv6 toeplitz -#define RCV_CONFIG_TZIPV4 0x00800000 // Include TCP port w/ IPv4 toeplitz -#define RCV_CONFIG_FLUSH 0x00400000 // Flush buffers +#define RCV_CONFIG_RESET 0x80000000 // RcvConfig register reset +#define RCV_CONFIG_ENABLE 0x40000000 // Enable the receive logic +#define RCV_CONFIG_ENPARSE 0x20000000 // Enable the receive parser +#define RCV_CONFIG_SOCKET 0x10000000 // Enable the socket detector +#define RCV_CONFIG_RCVBAD 0x08000000 // Receive all bad frames +#define RCV_CONFIG_CONTROL 0x04000000 // Receive all control frames +#define RCV_CONFIG_RCVPAUSE 0x02000000 // Enable pause transmit when attn +#define RCV_CONFIG_TZIPV6 0x01000000 // Include TCP port w/ IPv6 toeplitz +#define RCV_CONFIG_TZIPV4 0x00800000 // Include TCP port w/ IPv4 toeplitz +#define RCV_CONFIG_FLUSH 0x00400000 // Flush buffers #define RCV_CONFIG_PRIORITY_MASK 0x00300000 // Priority level #define RCV_CONFIG_HASH_MASK 0x00030000 // Hash depth -#define RCV_CONFIG_HASH_8 0x00000000 // Hash depth 8 -#define RCV_CONFIG_HASH_16 0x00010000 // Hash depth 16 -#define RCV_CONFIG_HASH_4 0x00020000 // Hash depth 4 -#define RCV_CONFIG_HASH_2 0x00030000 // Hash depth 2 +#define RCV_CONFIG_HASH_8 0x00000000 // Hash depth 8 +#define RCV_CONFIG_HASH_16 0x00010000 // Hash depth 16 +#define RCV_CONFIG_HASH_4 0x00020000 // Hash depth 4 +#define RCV_CONFIG_HASH_2 0x00030000 // Hash depth 2 #define RCV_CONFIG_BUFLEN_MASK 0x0000FFF0 // Buffer length bits 15:4. ie multiple of 16. -#define RCV_CONFIG_SKT_DIS 0x00000008 // Disable socket detection on attn +#define RCV_CONFIG_SKT_DIS 0x00000008 // Disable socket detection on attn // Macro to determine RCV_CONFIG_BUFLEN based on maximum frame size. // We add 18 bytes for Sahara receive status and padding, plus 4 bytes for CRC, // and round up to nearest 16 byte boundary #define RCV_CONFIG_BUFSIZE(_MaxFrame) ((((_MaxFrame) + 22) + 15) & RCV_CONFIG_BUFLEN_MASK) -#define XMT_CONFIG_RESET 0x80000000 // XmtConfig register reset -#define XMT_CONFIG_ENABLE 0x40000000 // Enable transmit logic +#define XMT_CONFIG_RESET 0x80000000 // XmtConfig register reset +#define XMT_CONFIG_ENABLE 0x40000000 // Enable transmit logic #define XMT_CONFIG_MAC_PARITY 0x20000000 // Inhibit MAC RAM parity error #define XMT_CONFIG_BUF_PARITY 0x10000000 // Inhibit D2F buffer parity error #define XMT_CONFIG_MEM_PARITY 0x08000000 // Inhibit 1T SRAM parity error @@ -249,9 +249,9 @@ typedef struct _SXG_HW_REGS { // A-XGMAC Configuration Register 1 #define AXGMAC_CFG1_XMT_PAUSE 0x80000000 // Allow the sending of Pause frames -#define AXGMAC_CFG1_XMT_EN 0x40000000 // Enable transmit +#define AXGMAC_CFG1_XMT_EN 0x40000000 // Enable transmit #define AXGMAC_CFG1_RCV_PAUSE 0x20000000 // Allow the detection of Pause frames -#define AXGMAC_CFG1_RCV_EN 0x10000000 // Enable receive +#define AXGMAC_CFG1_RCV_EN 0x10000000 // Enable receive #define AXGMAC_CFG1_XMT_STATE 0x04000000 // Current transmit state - READ ONLY #define AXGMAC_CFG1_RCV_STATE 0x01000000 // Current receive state - READ ONLY #define AXGMAC_CFG1_XOFF_SHORT 0x00001000 // Only pause for 64 slot on XOFF @@ -262,24 +262,24 @@ typedef struct _SXG_HW_REGS { #define AXGMAC_CFG1_RCV_FCS2 0x00000200 // Delay receive FCS 2 4-byte words #define AXGMAC_CFG1_RCV_FCS3 0x00000300 // Delay receive FCS 3 4-byte words #define AXGMAC_CFG1_PKT_OVERRIDE 0x00000080 // Per-packet override enable -#define AXGMAC_CFG1_SWAP 0x00000040 // Byte swap enable +#define AXGMAC_CFG1_SWAP 0x00000040 // Byte swap enable #define AXGMAC_CFG1_SHORT_ASSERT 0x00000020 // ASSERT srdrpfrm on short frame (<64) #define AXGMAC_CFG1_RCV_STRICT 0x00000010 // RCV only 802.3AE when CLEAR #define AXGMAC_CFG1_CHECK_LEN 0x00000008 // Verify frame length -#define AXGMAC_CFG1_GEN_FCS 0x00000004 // Generate FCS +#define AXGMAC_CFG1_GEN_FCS 0x00000004 // Generate FCS #define AXGMAC_CFG1_PAD_MASK 0x00000003 // Mask for pad bits -#define AXGMAC_CFG1_PAD_64 0x00000001 // Pad frames to 64 bytes +#define AXGMAC_CFG1_PAD_64 0x00000001 // Pad frames to 64 bytes #define AXGMAC_CFG1_PAD_VLAN 0x00000002 // Detect VLAN and pad to 68 bytes -#define AXGMAC_CFG1_PAD_68 0x00000003 // Pad to 68 bytes +#define AXGMAC_CFG1_PAD_68 0x00000003 // Pad to 68 bytes // A-XGMAC Configuration Register 2 #define AXGMAC_CFG2_GEN_PAUSE 0x80000000 // Generate single pause frame (test) #define AXGMAC_CFG2_LF_MANUAL 0x08000000 // Manual link fault sequence -#define AXGMAC_CFG2_LF_AUTO 0x04000000 // Auto link fault sequence +#define AXGMAC_CFG2_LF_AUTO 0x04000000 // Auto link fault sequence #define AXGMAC_CFG2_LF_REMOTE 0x02000000 // Remote link fault (READ ONLY) #define AXGMAC_CFG2_LF_LOCAL 0x01000000 // Local link fault (READ ONLY) #define AXGMAC_CFG2_IPG_MASK 0x001F0000 // Inter packet gap -#define AXGMAC_CFG2_IPG_SHIFT 16 +#define AXGMAC_CFG2_IPG_SHIFT 16 #define AXGMAC_CFG2_PAUSE_XMT 0x00008000 // Pause transmit module #define AXGMAC_CFG2_IPG_EXTEN 0x00000020 // Enable IPG extension algorithm #define AXGMAC_CFG2_IPGEX_MASK 0x0000001F // IPG extension @@ -299,9 +299,9 @@ typedef struct _SXG_HW_REGS { #define AXGMAC_SARHIGH_OCTET_SIX 0x00FF0000 // Sixth octet // A-XGMAC Maximum frame length register -#define AXGMAC_MAXFRAME_XMT 0x3FFF0000 // Maximum transmit frame length +#define AXGMAC_MAXFRAME_XMT 0x3FFF0000 // Maximum transmit frame length #define AXGMAC_MAXFRAME_XMT_SHIFT 16 -#define AXGMAC_MAXFRAME_RCV 0x0000FFFF // Maximum receive frame length +#define AXGMAC_MAXFRAME_RCV 0x0000FFFF // Maximum receive frame length // This register doesn't need to be written for standard MTU. // For jumbo, I'll just statically define the value here. This // value sets the receive byte count to 9036 (0x234C) and the @@ -324,34 +324,34 @@ typedef struct _SXG_HW_REGS { // A-XGMAC AMIIM Field Register #define AXGMAC_AMIIM_FIELD_ST 0xC0000000 // 2-bit ST field -#define AXGMAC_AMIIM_FIELD_ST_SHIFT 30 +#define AXGMAC_AMIIM_FIELD_ST_SHIFT 30 #define AXGMAC_AMIIM_FIELD_OP 0x30000000 // 2-bit OP field -#define AXGMAC_AMIIM_FIELD_OP_SHIFT 28 -#define AXGMAC_AMIIM_FIELD_PORT_ADDR 0x0F800000 // Port address field (hstphyadx in spec) +#define AXGMAC_AMIIM_FIELD_OP_SHIFT 28 +#define AXGMAC_AMIIM_FIELD_PORT_ADDR 0x0F800000 // Port address field (hstphyadx in spec) #define AXGMAC_AMIIM_FIELD_PORT_SHIFT 23 #define AXGMAC_AMIIM_FIELD_DEV_ADDR 0x007C0000 // Device address field (hstregadx in spec) #define AXGMAC_AMIIM_FIELD_DEV_SHIFT 18 #define AXGMAC_AMIIM_FIELD_TA 0x00030000 // 2-bit TA field -#define AXGMAC_AMIIM_FIELD_TA_SHIFT 16 +#define AXGMAC_AMIIM_FIELD_TA_SHIFT 16 #define AXGMAC_AMIIM_FIELD_DATA 0x0000FFFF // Data field // Values for the AXGMAC_AMIIM_FIELD_OP field in the A-XGMAC AMIIM Field Register -#define MIIM_OP_ADDR 0 // MIIM Address set operation -#define MIIM_OP_WRITE 1 // MIIM Write register operation -#define MIIM_OP_READ 2 // MIIM Read register operation +#define MIIM_OP_ADDR 0 // MIIM Address set operation +#define MIIM_OP_WRITE 1 // MIIM Write register operation +#define MIIM_OP_READ 2 // MIIM Read register operation #define MIIM_OP_ADDR_SHIFT (MIIM_OP_ADDR << AXGMAC_AMIIM_FIELD_OP_SHIFT) // Values for the AXGMAC_AMIIM_FIELD_PORT_ADDR field in the A-XGMAC AMIIM Field Register -#define MIIM_PORT_NUM 1 // All Sahara MIIM modules use port 1 +#define MIIM_PORT_NUM 1 // All Sahara MIIM modules use port 1 // Values for the AXGMAC_AMIIM_FIELD_DEV_ADDR field in the A-XGMAC AMIIM Field Register -#define MIIM_DEV_PHY_PMA 1 // PHY PMA/PMD module MIIM device number -#define MIIM_DEV_PHY_PCS 3 // PHY PCS module MIIM device number -#define MIIM_DEV_PHY_XS 4 // PHY XS module MIIM device number -#define MIIM_DEV_XGXS 5 // XGXS MIIM device number +#define MIIM_DEV_PHY_PMA 1 // PHY PMA/PMD module MIIM device number +#define MIIM_DEV_PHY_PCS 3 // PHY PCS module MIIM device number +#define MIIM_DEV_PHY_XS 4 // PHY XS module MIIM device number +#define MIIM_DEV_XGXS 5 // XGXS MIIM device number // Values for the AXGMAC_AMIIM_FIELD_TA field in the A-XGMAC AMIIM Field Register -#define MIIM_TA_10GB 2 // set to 2 for 10 GB operation +#define MIIM_TA_10GB 2 // set to 2 for 10 GB operation // A-XGMAC AMIIM Configuration Register #define AXGMAC_AMIIM_CFG_NOPREAM 0x00000080 // Bypass preamble of mngmt frame @@ -365,25 +365,25 @@ typedef struct _SXG_HW_REGS { #define AXGMAC_AMIIM_INDC_BUSY 0x00000001 // Set until cmd operation complete // Link Status and Control Register -#define LS_PHY_CLR_RESET 0x80000000 // Clear reset signal to PHY +#define LS_PHY_CLR_RESET 0x80000000 // Clear reset signal to PHY #define LS_SERDES_POWER_DOWN 0x40000000 // Power down the Sahara Serdes -#define LS_XGXS_ENABLE 0x20000000 // Enable the XAUI XGXS logic -#define LS_XGXS_CTL 0x10000000 // Hold XAUI XGXS logic reset until Serdes is up -#define LS_SERDES_DOWN 0x08000000 // When 0, XAUI Serdes is up and initialization is complete -#define LS_TRACE_DOWN 0x04000000 // When 0, Trace Serdes is up and initialization is complete -#define LS_PHY_CLK_25MHZ 0x02000000 // Set PHY clock to 25 MHz (else 156.125 MHz) -#define LS_PHY_CLK_EN 0x01000000 // Enable clock to PHY -#define LS_XAUI_LINK_UP 0x00000010 // XAUI link is up -#define LS_XAUI_LINK_CHNG 0x00000008 // XAUI link status has changed -#define LS_LINK_ALARM 0x00000004 // Link alarm pin -#define LS_ATTN_CTRL_MASK 0x00000003 // Mask link attention control bits -#define LS_ATTN_ALARM 0x00000000 // 00 => Attn on link alarm +#define LS_XGXS_ENABLE 0x20000000 // Enable the XAUI XGXS logic +#define LS_XGXS_CTL 0x10000000 // Hold XAUI XGXS logic reset until Serdes is up +#define LS_SERDES_DOWN 0x08000000 // When 0, XAUI Serdes is up and initialization is complete +#define LS_TRACE_DOWN 0x04000000 // When 0, Trace Serdes is up and initialization is complete +#define LS_PHY_CLK_25MHZ 0x02000000 // Set PHY clock to 25 MHz (else 156.125 MHz) +#define LS_PHY_CLK_EN 0x01000000 // Enable clock to PHY +#define LS_XAUI_LINK_UP 0x00000010 // XAUI link is up +#define LS_XAUI_LINK_CHNG 0x00000008 // XAUI link status has changed +#define LS_LINK_ALARM 0x00000004 // Link alarm pin +#define LS_ATTN_CTRL_MASK 0x00000003 // Mask link attention control bits +#define LS_ATTN_ALARM 0x00000000 // 00 => Attn on link alarm #define LS_ATTN_ALARM_OR_STAT_CHNG 0x00000001 // 01 => Attn on link alarm or status change -#define LS_ATTN_STAT_CHNG 0x00000002 // 10 => Attn on link status change -#define LS_ATTN_NONE 0x00000003 // 11 => no Attn +#define LS_ATTN_STAT_CHNG 0x00000002 // 10 => Attn on link status change +#define LS_ATTN_NONE 0x00000003 // 11 => no Attn // Link Address High Registers -#define LINK_ADDR_ENABLE 0x80000000 // Enable this link address +#define LINK_ADDR_ENABLE 0x80000000 // Enable this link address /*************************************************************************** @@ -396,7 +396,7 @@ typedef struct _SXG_HW_REGS { #define XGXS_ADDRESS_STATUS1 0x0001 // XS Status 1 #define XGXS_ADDRESS_DEVID_LOW 0x0002 // XS Device ID (low) #define XGXS_ADDRESS_DEVID_HIGH 0x0003 // XS Device ID (high) -#define XGXS_ADDRESS_SPEED 0x0004 // XS Speed ability +#define XGXS_ADDRESS_SPEED 0x0004 // XS Speed ability #define XGXS_ADDRESS_DEV_LOW 0x0005 // XS Devices in package #define XGXS_ADDRESS_DEV_HIGH 0x0006 // XS Devices in package #define XGXS_ADDRESS_STATUS2 0x0008 // XS Status 2 @@ -410,27 +410,27 @@ typedef struct _SXG_HW_REGS { #define XGXS_ADDRESS_RESET_HI2 0x8003 // Vendor-Specific Reset Hi 2 // XS Control 1 register bit definitions -#define XGXS_CONTROL1_RESET 0x8000 // Reset - self clearing +#define XGXS_CONTROL1_RESET 0x8000 // Reset - self clearing #define XGXS_CONTROL1_LOOPBACK 0x4000 // Enable loopback #define XGXS_CONTROL1_SPEED1 0x2000 // 0 = unspecified, 1 = 10Gb+ #define XGXS_CONTROL1_LOWPOWER 0x0400 // 1 = Low power mode #define XGXS_CONTROL1_SPEED2 0x0040 // Same as SPEED1 (?) -#define XGXS_CONTROL1_SPEED 0x003C // Everything reserved except zero (?) +#define XGXS_CONTROL1_SPEED 0x003C // Everything reserved except zero (?) // XS Status 1 register bit definitions -#define XGXS_STATUS1_FAULT 0x0080 // Fault detected -#define XGXS_STATUS1_LINK 0x0004 // 1 = Link up +#define XGXS_STATUS1_FAULT 0x0080 // Fault detected +#define XGXS_STATUS1_LINK 0x0004 // 1 = Link up #define XGXS_STATUS1_LOWPOWER 0x0002 // 1 = Low power supported // XS Speed register bit definitions -#define XGXS_SPEED_10G 0x0001 // 1 = 10G capable +#define XGXS_SPEED_10G 0x0001 // 1 = 10G capable // XS Devices register bit definitions -#define XGXS_DEVICES_DTE 0x0020 // DTE XS Present -#define XGXS_DEVICES_PHY 0x0010 // PHY XS Present -#define XGXS_DEVICES_PCS 0x0008 // PCS Present -#define XGXS_DEVICES_WIS 0x0004 // WIS Present -#define XGXS_DEVICES_PMD 0x0002 // PMD/PMA Present +#define XGXS_DEVICES_DTE 0x0020 // DTE XS Present +#define XGXS_DEVICES_PHY 0x0010 // PHY XS Present +#define XGXS_DEVICES_PCS 0x0008 // PCS Present +#define XGXS_DEVICES_WIS 0x0004 // WIS Present +#define XGXS_DEVICES_PMD 0x0002 // PMD/PMA Present #define XGXS_DEVICES_CLAUSE22 0x0001 // Clause 22 registers present // XS Devices High register bit definitions @@ -444,18 +444,18 @@ typedef struct _SXG_HW_REGS { #define XGXS_STATUS2_RCV_FAULT 0x0400 // Receive fault // XS Package ID High register bit definitions -#define XGXS_PKGID_HIGH_ORG 0xFC00 // Organizationally Unique -#define XGXS_PKGID_HIGH_MFG 0x03F0 // Manufacturer Model -#define XGXS_PKGID_HIGH_REV 0x000F // Revision Number +#define XGXS_PKGID_HIGH_ORG 0xFC00 // Organizationally Unique +#define XGXS_PKGID_HIGH_MFG 0x03F0 // Manufacturer Model +#define XGXS_PKGID_HIGH_REV 0x000F // Revision Number // XS Lane Status register bit definitions -#define XGXS_LANE_PHY 0x1000 // PHY/DTE lane alignment status -#define XGXS_LANE_PATTERN 0x0800 // Pattern testing ability -#define XGXS_LANE_LOOPBACK 0x0400 // PHY loopback ability -#define XGXS_LANE_SYNC3 0x0008 // Lane 3 sync -#define XGXS_LANE_SYNC2 0x0004 // Lane 2 sync -#define XGXS_LANE_SYNC1 0x0002 // Lane 1 sync -#define XGXS_LANE_SYNC0 0x0001 // Lane 0 sync +#define XGXS_LANE_PHY 0x1000 // PHY/DTE lane alignment status +#define XGXS_LANE_PATTERN 0x0800 // Pattern testing ability +#define XGXS_LANE_LOOPBACK 0x0400 // PHY loopback ability +#define XGXS_LANE_SYNC3 0x0008 // Lane 3 sync +#define XGXS_LANE_SYNC2 0x0004 // Lane 2 sync +#define XGXS_LANE_SYNC1 0x0002 // Lane 1 sync +#define XGXS_LANE_SYNC0 0x0001 // Lane 0 sync // XS Test Control register bit definitions #define XGXS_TEST_PATTERN_ENABLE 0x0004 // Test pattern enabled @@ -473,10 +473,10 @@ typedef struct _SXG_HW_REGS { // LASI (Link Alarm Status Interrupt) Registers (located in MIIM_DEV_PHY_PMA device) #define LASI_RX_ALARM_CONTROL 0x9000 // LASI RX_ALARM Control #define LASI_TX_ALARM_CONTROL 0x9001 // LASI TX_ALARM Control -#define LASI_CONTROL 0x9002 // LASI Control +#define LASI_CONTROL 0x9002 // LASI Control #define LASI_RX_ALARM_STATUS 0x9003 // LASI RX_ALARM Status #define LASI_TX_ALARM_STATUS 0x9004 // LASI TX_ALARM Status -#define LASI_STATUS 0x9005 // LASI Status +#define LASI_STATUS 0x9005 // LASI Status // LASI_CONTROL bit definitions #define LASI_CTL_RX_ALARM_ENABLE 0x0004 // Enable RX_ALARM interrupts @@ -489,34 +489,34 @@ typedef struct _SXG_HW_REGS { #define LASI_STATUS_LS_ALARM 0x0001 // Link Status // PHY registers - PMA/PMD (device 1) -#define PHY_PMA_CONTROL1 0x0000 // PMA/PMD Control 1 -#define PHY_PMA_STATUS1 0x0001 // PMA/PMD Status 1 -#define PHY_PMA_RCV_DET 0x000A // PMA/PMD Receive Signal Detect +#define PHY_PMA_CONTROL1 0x0000 // PMA/PMD Control 1 +#define PHY_PMA_STATUS1 0x0001 // PMA/PMD Status 1 +#define PHY_PMA_RCV_DET 0x000A // PMA/PMD Receive Signal Detect // other PMA/PMD registers exist and can be defined as needed // PHY registers - PCS (device 3) -#define PHY_PCS_CONTROL1 0x0000 // PCS Control 1 -#define PHY_PCS_STATUS1 0x0001 // PCS Status 1 -#define PHY_PCS_10G_STATUS1 0x0020 // PCS 10GBASE-R Status 1 +#define PHY_PCS_CONTROL1 0x0000 // PCS Control 1 +#define PHY_PCS_STATUS1 0x0001 // PCS Status 1 +#define PHY_PCS_10G_STATUS1 0x0020 // PCS 10GBASE-R Status 1 // other PCS registers exist and can be defined as needed // PHY registers - XS (device 4) -#define PHY_XS_CONTROL1 0x0000 // XS Control 1 -#define PHY_XS_STATUS1 0x0001 // XS Status 1 -#define PHY_XS_LANE_STATUS 0x0018 // XS Lane Status +#define PHY_XS_CONTROL1 0x0000 // XS Control 1 +#define PHY_XS_STATUS1 0x0001 // XS Status 1 +#define PHY_XS_LANE_STATUS 0x0018 // XS Lane Status // other XS registers exist and can be defined as needed // PHY_PMA_CONTROL1 register bit definitions -#define PMA_CONTROL1_RESET 0x8000 // PMA/PMD reset +#define PMA_CONTROL1_RESET 0x8000 // PMA/PMD reset // PHY_PMA_RCV_DET register bit definitions -#define PMA_RCV_DETECT 0x0001 // PMA/PMD receive signal detect +#define PMA_RCV_DETECT 0x0001 // PMA/PMD receive signal detect // PHY_PCS_10G_STATUS1 register bit definitions -#define PCS_10B_BLOCK_LOCK 0x0001 // PCS 10GBASE-R locked to receive blocks +#define PCS_10B_BLOCK_LOCK 0x0001 // PCS 10GBASE-R locked to receive blocks // PHY_XS_LANE_STATUS register bit definitions -#define XS_LANE_ALIGN 0x1000 // XS transmit lanes aligned +#define XS_LANE_ALIGN 0x1000 // XS transmit lanes aligned // PHY Microcode download data structure typedef struct _PHY_UCODE { @@ -558,8 +558,8 @@ typedef struct _XMT_DESC { // command codes #define XMT_DESC_CMD_RAW_SEND 0 // raw send descriptor #define XMT_DESC_CMD_CSUM_INSERT 1 // checksum insert descriptor -#define XMT_DESC_CMD_FORMAT 2 // format descriptor -#define XMT_DESC_CMD_PRIME 3 // prime descriptor +#define XMT_DESC_CMD_FORMAT 2 // format descriptor +#define XMT_DESC_CMD_PRIME 3 // prime descriptor #define XMT_DESC_CMD_CODE_SHFT 6 // comand code shift (shift to bits [31:30] in word 0) // shifted command codes #define XMT_RAW_SEND (XMT_DESC_CMD_RAW_SEND << XMT_DESC_CMD_CODE_SHFT) @@ -569,22 +569,22 @@ typedef struct _XMT_DESC { // XMT_DESC Control Byte (XmtCtl) definitions // NOTE: These bits do not work on Sahara (Rev A)! -#define XMT_CTL_PAUSE_FRAME 0x80 // current frame is a pause control frame (for statistics) +#define XMT_CTL_PAUSE_FRAME 0x80 // current frame is a pause control frame (for statistics) #define XMT_CTL_CONTROL_FRAME 0x40 // current frame is a control frame (for statistics) #define XMT_CTL_PER_PKT_QUAL 0x20 // per packet qualifier #define XMT_CTL_PAD_MODE_NONE 0x00 // do not pad frame -#define XMT_CTL_PAD_MODE_64 0x08 // pad frame to 64 bytes +#define XMT_CTL_PAD_MODE_64 0x08 // pad frame to 64 bytes #define XMT_CTL_PAD_MODE_VLAN_68 0x10 // pad frame to 64 bytes, and VLAN frames to 68 bytes -#define XMT_CTL_PAD_MODE_68 0x18 // pad frame to 68 bytes -#define XMT_CTL_GEN_FCS 0x04 // generate FCS (CRC) for this frame -#define XMT_CTL_DELAY_FCS_0 0x00 // do not delay FCS calcution -#define XMT_CTL_DELAY_FCS_1 0x01 // delay FCS calculation by 1 (4-byte) word -#define XMT_CTL_DELAY_FCS_2 0x02 // delay FCS calculation by 2 (4-byte) words -#define XMT_CTL_DELAY_FCS_3 0x03 // delay FCS calculation by 3 (4-byte) words +#define XMT_CTL_PAD_MODE_68 0x18 // pad frame to 68 bytes +#define XMT_CTL_GEN_FCS 0x04 // generate FCS (CRC) for this frame +#define XMT_CTL_DELAY_FCS_0 0x00 // do not delay FCS calcution +#define XMT_CTL_DELAY_FCS_1 0x01 // delay FCS calculation by 1 (4-byte) word +#define XMT_CTL_DELAY_FCS_2 0x02 // delay FCS calculation by 2 (4-byte) words +#define XMT_CTL_DELAY_FCS_3 0x03 // delay FCS calculation by 3 (4-byte) words // XMT_DESC XmtBufId definition -#define XMT_BUF_ID_SHFT 8 // The Xmt buffer ID is formed by dividing - // the buffer (DRAM) address by 256 (or << 8) +#define XMT_BUF_ID_SHFT 8 // The Xmt buffer ID is formed by dividing + // the buffer (DRAM) address by 256 (or << 8) /***************************************************************************** * Receiver Sequencer Definitions @@ -594,8 +594,8 @@ typedef struct _XMT_DESC { #define RCV_EVTQ_RBFID_MASK 0x0000FFFF // bit mask for the Receive Buffer ID // Receive Buffer ID definition -#define RCV_BUF_ID_SHFT 5 // The Rcv buffer ID is formed by dividing - // the buffer (DRAM) address by 32 (or << 5) +#define RCV_BUF_ID_SHFT 5 // The Rcv buffer ID is formed by dividing + // the buffer (DRAM) address by 32 (or << 5) // Format of the 18 byte Receive Buffer returned by the // Receive Sequencer for received packets @@ -623,48 +623,48 @@ typedef struct _RCV_BUF_HDR { * Queue definitions *****************************************************************************/ -// Ingress (read only) queue numbers -#define PXY_BUF_Q 0 // Proxy Buffer Queue -#define HST_EVT_Q 1 // Host Event Queue -#define XMT_BUF_Q 2 // Transmit Buffer Queue -#define SKT_EVL_Q 3 // RcvSqr Socket Event Low Priority Queue -#define RCV_EVL_Q 4 // RcvSqr Rcv Event Low Priority Queue -#define SKT_EVH_Q 5 // RcvSqr Socket Event High Priority Queue -#define RCV_EVH_Q 6 // RcvSqr Rcv Event High Priority Queue -#define DMA_RSP_Q 7 // Dma Response Queue - one per CPU context -// Local (read/write) queue numbers -#define LOCAL_A_Q 8 // Spare local Queue -#define LOCAL_B_Q 9 // Spare local Queue -#define LOCAL_C_Q 10 // Spare local Queue -#define FSM_EVT_Q 11 // Finite-State-Machine Event Queue -#define SBF_PAL_Q 12 // System Buffer Physical Address (low) Queue -#define SBF_PAH_Q 13 // System Buffer Physical Address (high) Queue -#define SBF_VAL_Q 14 // System Buffer Virtual Address (low) Queue -#define SBF_VAH_Q 15 // System Buffer Virtual Address (high) Queue -// Egress (write only) queue numbers -#define H2G_CMD_Q 16 // Host to GlbRam DMA Command Queue -#define H2D_CMD_Q 17 // Host to DRAM DMA Command Queue -#define G2H_CMD_Q 18 // GlbRam to Host DMA Command Queue -#define G2D_CMD_Q 19 // GlbRam to DRAM DMA Command Queue -#define D2H_CMD_Q 20 // DRAM to Host DMA Command Queue -#define D2G_CMD_Q 21 // DRAM to GlbRam DMA Command Queue -#define D2D_CMD_Q 22 // DRAM to DRAM DMA Command Queue -#define PXL_CMD_Q 23 // Low Priority Proxy Command Queue -#define PXH_CMD_Q 24 // High Priority Proxy Command Queue -#define RSQ_CMD_Q 25 // Receive Sequencer Command Queue -#define RCV_BUF_Q 26 // Receive Buffer Queue - -// Bit definitions for the Proxy Command queues (PXL_CMD_Q and PXH_CMD_Q) -#define PXY_COPY_EN 0x00200000 // enable copy of xmt descriptor to xmt command queue -#define PXY_SIZE_16 0x00000000 // copy 16 bytes -#define PXY_SIZE_32 0x00100000 // copy 32 bytes +/* Ingress (read only) queue numbers */ +#define PXY_BUF_Q 0 /* Proxy Buffer Queue */ +#define HST_EVT_Q 1 /* Host Event Queue */ +#define XMT_BUF_Q 2 /* Transmit Buffer Queue */ +#define SKT_EVL_Q 3 /* RcvSqr Socket Event Low Priority Queue */ +#define RCV_EVL_Q 4 /* RcvSqr Rcv Event Low Priority Queue */ +#define SKT_EVH_Q 5 /* RcvSqr Socket Event High Priority Queue */ +#define RCV_EVH_Q 6 /* RcvSqr Rcv Event High Priority Queue */ +#define DMA_RSP_Q 7 /* Dma Response Queue - one per CPU context */ +/* Local (read/write) queue numbers */ +#define LOCAL_A_Q 8 /* Spare local Queue */ +#define LOCAL_B_Q 9 /* Spare local Queue */ +#define LOCAL_C_Q 10 /* Spare local Queue */ +#define FSM_EVT_Q 11 /* Finite-State-Machine Event Queue */ +#define SBF_PAL_Q 12 /* System Buffer Physical Address (low) Queue */ +#define SBF_PAH_Q 13 /* System Buffer Physical Address (high) Queue */ +#define SBF_VAL_Q 14 /* System Buffer Virtual Address (low) Queue */ +#define SBF_VAH_Q 15 /* System Buffer Virtual Address (high) Queue */ +/* Egress (write only) queue numbers */ +#define H2G_CMD_Q 16 /* Host to GlbRam DMA Command Queue */ +#define H2D_CMD_Q 17 /* Host to DRAM DMA Command Queue */ +#define G2H_CMD_Q 18 /* GlbRam to Host DMA Command Queue */ +#define G2D_CMD_Q 19 /* GlbRam to DRAM DMA Command Queue */ +#define D2H_CMD_Q 20 /* DRAM to Host DMA Command Queue */ +#define D2G_CMD_Q 21 /* DRAM to GlbRam DMA Command Queue */ +#define D2D_CMD_Q 22 /* DRAM to DRAM DMA Command Queue */ +#define PXL_CMD_Q 23 /* Low Priority Proxy Command Queue */ +#define PXH_CMD_Q 24 /* High Priority Proxy Command Queue */ +#define RSQ_CMD_Q 25 /* Receive Sequencer Command Queue */ +#define RCV_BUF_Q 26 /* Receive Buffer Queue */ + +/* Bit definitions for the Proxy Command queues (PXL_CMD_Q and PXH_CMD_Q) */ +#define PXY_COPY_EN 0x00200000 /* enable copy of xmt descriptor to xmt command queue */ +#define PXY_SIZE_16 0x00000000 /* copy 16 bytes */ +#define PXY_SIZE_32 0x00100000 /* copy 32 bytes */ /***************************************************************************** * SXG EEPROM/Flash Configuration Definitions *****************************************************************************/ #pragma pack(push, 1) -// +/* */ typedef struct _HW_CFG_DATA { ushort Addr; union { @@ -673,22 +673,22 @@ typedef struct _HW_CFG_DATA { }; } HW_CFG_DATA, *PHW_CFG_DATA; -// +/* */ #define NUM_HW_CFG_ENTRIES ((128/sizeof(HW_CFG_DATA)) - 4) -// MAC address +/* MAC address */ typedef struct _SXG_CONFIG_MAC { - unsigned char MacAddr[6]; // MAC Address + unsigned char MacAddr[6]; /* MAC Address */ } SXG_CONFIG_MAC, *PSXG_CONFIG_MAC; -// +/* */ typedef struct _ATK_FRU { unsigned char PartNum[6]; unsigned char Revision[2]; unsigned char Serial[14]; } ATK_FRU, *PATK_FRU; -// OEM FRU Format types +/* OEM FRU Format types */ #define ATK_FRU_FORMAT 0x0000 #define CPQ_FRU_FORMAT 0x0001 #define DELL_FRU_FORMAT 0x0002 @@ -697,24 +697,24 @@ typedef struct _ATK_FRU { #define EMC_FRU_FORMAT 0x0005 #define NO_FRU_FORMAT 0xFFFF -// EEPROM/Flash Format +/* EEPROM/Flash Format */ typedef struct _SXG_CONFIG { - // - // Section 1 (128 bytes) - // - ushort MagicWord; // EEPROM/FLASH Magic code 'A5A5' - ushort SpiClks; // SPI bus clock dividers + /* */ + /* Section 1 (128 bytes) */ + /* */ + ushort MagicWord; /* EEPROM/FLASH Magic code 'A5A5' */ + ushort SpiClks; /* SPI bus clock dividers */ HW_CFG_DATA HwCfg[NUM_HW_CFG_ENTRIES]; - // - // - // - ushort Version; // EEPROM format version - SXG_CONFIG_MAC MacAddr[4]; // space for 4 MAC addresses - ATK_FRU AtkFru; // FRU information - ushort OemFruFormat; // OEM FRU format type - unsigned char OemFru[76]; // OEM FRU information (optional) - ushort Checksum; // Checksum of section 2 - // CS info XXXTODO + /* */ + /* */ + /* */ + ushort Version; /* EEPROM format version */ + SXG_CONFIG_MAC MacAddr[4]; /* space for 4 MAC addresses */ + ATK_FRU AtkFru; /* FRU information */ + ushort OemFruFormat; /* OEM FRU format type */ + unsigned char OemFru[76]; /* OEM FRU information (optional) */ + ushort Checksum; /* Checksum of section 2 */ + /* CS info XXXTODO */ } SXG_CONFIG, *PSXG_CONFIG; #pragma pack(pop) @@ -723,12 +723,12 @@ typedef struct _SXG_CONFIG { *****************************************************************************/ // Sahara (ASIC level) defines -#define SAHARA_GRAM_SIZE 0x020000 // GRAM size - 128 KB -#define SAHARA_DRAM_SIZE 0x200000 // DRAM size - 2 MB -#define SAHARA_QRAM_SIZE 0x004000 // QRAM size - 16K entries (64 KB) -#define SAHARA_WCS_SIZE 0x002000 // WCS - 8K instructions (x 108 bits) +#define SAHARA_GRAM_SIZE 0x020000 // GRAM size - 128 KB +#define SAHARA_DRAM_SIZE 0x200000 // DRAM size - 2 MB +#define SAHARA_QRAM_SIZE 0x004000 // QRAM size - 16K entries (64 KB) +#define SAHARA_WCS_SIZE 0x002000 // WCS - 8K instructions (x 108 bits) // Arabia (board level) defines -#define FLASH_SIZE 0x080000 // 512 KB (4 Mb) -#define EEPROM_SIZE_XFMR 512 // true EEPROM size (bytes), including xfmr area -#define EEPROM_SIZE_NO_XFMR 256 // EEPROM size excluding xfmr area +#define FLASH_SIZE 0x080000 // 512 KB (4 Mb) +#define EEPROM_SIZE_XFMR 512 // true EEPROM size (bytes), including xfmr area +#define EEPROM_SIZE_NO_XFMR 256 // EEPROM size excluding xfmr area diff --git a/drivers/staging/sxg/sxgphycode.h b/drivers/staging/sxg/sxgphycode.h index 26b36c81eb1a..8dbaeda7eca4 100644 --- a/drivers/staging/sxg/sxgphycode.h +++ b/drivers/staging/sxg/sxgphycode.h @@ -34,7 +34,7 @@ static PHY_UCODE PhyUcode[] = { */ /* Addr, Data */ {0xc017, 0xfeb0}, /* flip RX_LOS polarity (mandatory */ - /* patch for SFP+ applications) */ + /* patch for SFP+ applications) */ {0xC001, 0x0428}, /* flip RX serial polarity */ {0xc013, 0xf341}, /* invert lxmit clock (mandatory patch) */ @@ -43,7 +43,7 @@ static PHY_UCODE PhyUcode[] = { {0xc210, 0x8000}, /* reset datapath (mandatory patch) */ {0xc210, 0x0000}, /* reset datapath (mandatory patch) */ {0x0000, 0x0032}, /* wait for 50ms for datapath reset to */ - /* complete. (mandatory patch) */ + /* complete. (mandatory patch) */ /* Configure the LED's */ {0xc214, 0x0099}, /* configure the LED drivers */ @@ -52,15 +52,15 @@ static PHY_UCODE PhyUcode[] = { /* Transceiver-specific MDIO Patches: */ {0xc010, 0x448a}, /* (bit 14) mask out high BER input from the */ - /* LOS signal in 1.000A */ - /* (mandatory patch for SR code)*/ + /* LOS signal in 1.000A */ + /* (mandatory patch for SR code) */ {0xc003, 0x0181}, /* (bit 7) enable the CDR inc setting in */ - /* 1.C005 (mandatory patch for SR code) */ + /* 1.C005 (mandatory patch for SR code) */ /* Transceiver-specific Microcontroller Initialization: */ {0xc04a, 0x5200}, /* activate microcontroller and pause */ {0x0000, 0x0032}, /* wait 50ms for microcontroller before */ - /* writing in code. */ + /* writing in code. */ /* code block starts here: */ {0xcc00, 0x2009}, diff --git a/drivers/staging/usbip/usbip_common.c b/drivers/staging/usbip/usbip_common.c index e64918f42ff7..72e209276ea7 100644 --- a/drivers/staging/usbip/usbip_common.c +++ b/drivers/staging/usbip/usbip_common.c @@ -221,7 +221,7 @@ static void usbip_dump_request_type(__u8 rt) static void usbip_dump_usb_ctrlrequest(struct usb_ctrlrequest *cmd) { if (!cmd) { - printk(" %s : null pointer\n", __FUNCTION__); + printk(" %s : null pointer\n", __func__); return; } diff --git a/drivers/staging/usbip/vhci_rx.c b/drivers/staging/usbip/vhci_rx.c index 933ccaf50afb..58e3995d0e2c 100644 --- a/drivers/staging/usbip/vhci_rx.c +++ b/drivers/staging/usbip/vhci_rx.c @@ -202,7 +202,7 @@ static void vhci_rx_pdu(struct usbip_device *ud) ret = usbip_xmit(0, ud->tcp_socket, (char *) &pdu, sizeof(pdu), 0); if (ret != sizeof(pdu)) { uerr("receiving pdu failed! size is %d, should be %d\n", - ret, sizeof(pdu)); + ret, (unsigned int)sizeof(pdu)); usbip_event_add(ud, VDEV_EVENT_ERROR_TCP); return; } diff --git a/drivers/staging/winbond/Kconfig b/drivers/staging/winbond/Kconfig index 10d72bec88a9..425219ed7ab9 100644 --- a/drivers/staging/winbond/Kconfig +++ b/drivers/staging/winbond/Kconfig @@ -1,6 +1,6 @@ config W35UND tristate "Winbond driver" - depends on MAC80211 && WLAN_80211 && EXPERIMENTAL && !4KSTACKS + depends on MAC80211 && WLAN_80211 && USB && EXPERIMENTAL && !4KSTACKS default n ---help--- This is highly experimental driver for winbond wifi card on some Kohjinsha notebooks diff --git a/drivers/staging/winbond/README b/drivers/staging/winbond/README index 707b6b354dc5..cb944e4bf174 100644 --- a/drivers/staging/winbond/README +++ b/drivers/staging/winbond/README @@ -5,6 +5,7 @@ TODO: - remove typedefs - remove unused ioctls - use cfg80211 for regulatory stuff + - fix 4k stack problems Please send patches to Greg Kroah-Hartman <greg@kroah.com> and Pavel Machek <pavel@suse.cz> diff --git a/drivers/staging/winbond/bss_f.h b/drivers/staging/winbond/bss_f.h index c957bc94f08d..013183153993 100644 --- a/drivers/staging/winbond/bss_f.h +++ b/drivers/staging/winbond/bss_f.h @@ -24,7 +24,7 @@ void DesiredRate2InfoElement(PWB32_ADAPTER Adapter, u8 *addr, u16 *iFildOffset, u8 *pBasicRateSet, u8 BasicRateCount, u8 *pOperationRateSet, u8 OperationRateCount); void BSSAddIBSSdata(PWB32_ADAPTER Adapter, PWB_BSSDESCRIPTION psDesData); -unsigned char boCmpMacAddr( PUCHAR, PUCHAR ); +unsigned char boCmpMacAddr( u8 *, u8 *); unsigned char boCmpSSID(struct SSID_Element *psSSID1, struct SSID_Element *psSSID2); u16 wBSSfindSSID(PWB32_ADAPTER Adapter, struct SSID_Element *psSsid); u16 wRoamingQuery(PWB32_ADAPTER Adapter); @@ -42,11 +42,11 @@ void RateReSortForSRate(PWB32_ADAPTER Adapter, u8 *RateArray, u8 num); void Assemble_IE(PWB32_ADAPTER Adapter, u16 wBssIdx); void SetMaxTxRate(PWB32_ADAPTER Adapter); -void CreateWpaIE(PWB32_ADAPTER Adapter, u16* iFildOffset, PUCHAR msg, struct Management_Frame* msgHeader, +void CreateWpaIE(PWB32_ADAPTER Adapter, u16* iFildOffset, u8 *msg, struct Management_Frame* msgHeader, struct Association_Request_Frame_Body* msgBody, u16 iMSindex); //added by WS 05/14/05 #ifdef _WPA2_ -void CreateRsnIE(PWB32_ADAPTER Adapter, u16* iFildOffset, PUCHAR msg, struct Management_Frame* msgHeader, +void CreateRsnIE(PWB32_ADAPTER Adapter, u16* iFildOffset, u8 *msg, struct Management_Frame* msgHeader, struct Association_Request_Frame_Body* msgBody, u16 iMSindex);//added by WS 05/14/05 u16 SearchPmkid(PWB32_ADAPTER Adapter, struct Management_Frame* msgHeader, diff --git a/drivers/staging/winbond/ds_tkip.h b/drivers/staging/winbond/ds_tkip.h index 29e5055b45a1..6841d66e7e8c 100644 --- a/drivers/staging/winbond/ds_tkip.h +++ b/drivers/staging/winbond/ds_tkip.h @@ -25,9 +25,9 @@ typedef struct tkip s32 bytes_in_M; // # bytes in M } tkip_t; -//void _append_data( PUCHAR pData, u16 size, tkip_t *p ); -void Mds_MicGet( void* Adapter, void* pRxLayer1, PUCHAR pKey, PUCHAR pMic ); -void Mds_MicFill( void* Adapter, void* pDes, PUCHAR XmitBufAddress ); +//void _append_data( u8 *pData, u16 size, tkip_t *p ); +void Mds_MicGet( void* Adapter, void* pRxLayer1, u8 *pKey, u8 *pMic ); +void Mds_MicFill( void* Adapter, void* pDes, u8 *XmitBufAddress ); diff --git a/drivers/staging/winbond/linux/common.h b/drivers/staging/winbond/linux/common.h index 6b00bad74f78..712a86cfa68b 100644 --- a/drivers/staging/winbond/linux/common.h +++ b/drivers/staging/winbond/linux/common.h @@ -39,14 +39,6 @@ // Common type definition //=============================================================== -typedef u8* PUCHAR; -typedef s8* PCHAR; -typedef u8* PBOOLEAN; -typedef u16* PUSHORT; -typedef u32* PULONG; -typedef s16* PSHORT; - - //=========================================== #define IGNORE 2 #define SUCCESS 1 @@ -110,16 +102,9 @@ typedef struct urb * PURB; #define OS_ATOMIC_READ( _A, _V ) _V #define OS_ATOMIC_INC( _A, _V ) EncapAtomicInc( _A, (void*)_V ) #define OS_ATOMIC_DEC( _A, _V ) EncapAtomicDec( _A, (void*)_V ) -#define OS_MEMORY_CLEAR( _A, _S ) memset( (PUCHAR)_A,0,_S) +#define OS_MEMORY_CLEAR( _A, _S ) memset( (u8 *)_A,0,_S) #define OS_MEMORY_COMPARE( _A, _B, _S ) (memcmp(_A,_B,_S)? 0 : 1) // Definition is reverse with Ndis 1: the same 0: different - -#define OS_SPIN_LOCK spinlock_t -#define OS_SPIN_LOCK_ALLOCATE( _S ) spin_lock_init( _S ); -#define OS_SPIN_LOCK_FREE( _S ) -#define OS_SPIN_LOCK_ACQUIRED( _S ) spin_lock_irq( _S ) -#define OS_SPIN_LOCK_RELEASED( _S ) spin_unlock_irq( _S ); - #define OS_TIMER struct timer_list #define OS_TIMER_INITIAL( _T, _F, _P ) \ { \ diff --git a/drivers/staging/winbond/linux/wb35reg.c b/drivers/staging/winbond/linux/wb35reg.c index 2c0b454e8cad..ebb6db5438a4 100644 --- a/drivers/staging/winbond/linux/wb35reg.c +++ b/drivers/staging/winbond/linux/wb35reg.c @@ -10,7 +10,7 @@ extern void phy_calibration_winbond(hw_data_t *phw_data, u32 frequency); // Flag : AUTO_INCREMENT - RegisterNo will auto increment 4 // NO_INCREMENT - Function will write data into the same register unsigned char -Wb35Reg_BurstWrite(phw_data_t pHwData, u16 RegisterNo, PULONG pRegisterData, u8 NumberOfData, u8 Flag) +Wb35Reg_BurstWrite(phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterData, u8 NumberOfData, u8 Flag) { PWB35REG pWb35Reg = &pHwData->Wb35Reg; PURB pUrb = NULL; @@ -30,13 +30,13 @@ Wb35Reg_BurstWrite(phw_data_t pHwData, u16 RegisterNo, PULONG pRegisterData, u8 if( pUrb && pRegQueue ) { pRegQueue->DIRECT = 2;// burst write register pRegQueue->INDEX = RegisterNo; - pRegQueue->pBuffer = (PULONG)((PUCHAR)pRegQueue + sizeof(REG_QUEUE)); + pRegQueue->pBuffer = (u32 *)((u8 *)pRegQueue + sizeof(REG_QUEUE)); memcpy( pRegQueue->pBuffer, pRegisterData, DataSize ); //the function for reversing register data from little endian to big endian for( i=0; i<NumberOfData ; i++ ) pRegQueue->pBuffer[i] = cpu_to_le32( pRegQueue->pBuffer[i] ); - dr = (struct usb_ctrlrequest *)((PUCHAR)pRegQueue + sizeof(REG_QUEUE) + DataSize); + dr = (struct usb_ctrlrequest *)((u8 *)pRegQueue + sizeof(REG_QUEUE) + DataSize); dr->bRequestType = USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE; dr->bRequest = 0x04; // USB or vendor-defined request code, burst mode dr->wValue = cpu_to_le16( Flag ); // 0: Register number auto-increment, 1: No auto increment @@ -46,14 +46,14 @@ Wb35Reg_BurstWrite(phw_data_t pHwData, u16 RegisterNo, PULONG pRegisterData, u8 pRegQueue->pUsbReq = dr; pRegQueue->pUrb = pUrb; - OS_SPIN_LOCK_ACQUIRED( &pWb35Reg->EP0VM_spin_lock ); + spin_lock_irq( &pWb35Reg->EP0VM_spin_lock ); if (pWb35Reg->pRegFirst == NULL) pWb35Reg->pRegFirst = pRegQueue; else pWb35Reg->pRegLast->Next = pRegQueue; pWb35Reg->pRegLast = pRegQueue; - OS_SPIN_LOCK_RELEASED( &pWb35Reg->EP0VM_spin_lock ); + spin_unlock_irq( &pWb35Reg->EP0VM_spin_lock ); // Start EP0VM Wb35Reg_EP0VM_start(pHwData); @@ -181,7 +181,7 @@ Wb35Reg_Write( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue ) pRegQueue->INDEX = RegisterNo; pRegQueue->VALUE = cpu_to_le32(RegisterValue); pRegQueue->RESERVED_VALID = FALSE; - dr = (struct usb_ctrlrequest *)((PUCHAR)pRegQueue + sizeof(REG_QUEUE)); + dr = (struct usb_ctrlrequest *)((u8 *)pRegQueue + sizeof(REG_QUEUE)); dr->bRequestType = USB_TYPE_VENDOR|USB_DIR_OUT |USB_RECIP_DEVICE; dr->bRequest = 0x03; // USB or vendor-defined request code, burst mode dr->wValue = cpu_to_le16(0x0); @@ -193,14 +193,14 @@ Wb35Reg_Write( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue ) pRegQueue->pUsbReq = dr; pRegQueue->pUrb = pUrb; - OS_SPIN_LOCK_ACQUIRED(&pWb35Reg->EP0VM_spin_lock ); + spin_lock_irq(&pWb35Reg->EP0VM_spin_lock ); if (pWb35Reg->pRegFirst == NULL) pWb35Reg->pRegFirst = pRegQueue; else pWb35Reg->pRegLast->Next = pRegQueue; pWb35Reg->pRegLast = pRegQueue; - OS_SPIN_LOCK_RELEASED( &pWb35Reg->EP0VM_spin_lock ); + spin_unlock_irq( &pWb35Reg->EP0VM_spin_lock ); // Start EP0VM Wb35Reg_EP0VM_start(pHwData); @@ -220,7 +220,7 @@ Wb35Reg_Write( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue ) // FALSE : register not support unsigned char Wb35Reg_WriteWithCallbackValue( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue, - PCHAR pValue, s8 Len) + s8 *pValue, s8 Len) { PWB35REG pWb35Reg = &pHwData->Wb35Reg; struct usb_ctrlrequest *dr; @@ -243,7 +243,7 @@ Wb35Reg_WriteWithCallbackValue( phw_data_t pHwData, u16 RegisterNo, u32 Register //NOTE : Users must guarantee the size of value will not exceed the buffer size. memcpy(pRegQueue->RESERVED, pValue, Len); pRegQueue->RESERVED_VALID = TRUE; - dr = (struct usb_ctrlrequest *)((PUCHAR)pRegQueue + sizeof(REG_QUEUE)); + dr = (struct usb_ctrlrequest *)((u8 *)pRegQueue + sizeof(REG_QUEUE)); dr->bRequestType = USB_TYPE_VENDOR|USB_DIR_OUT |USB_RECIP_DEVICE; dr->bRequest = 0x03; // USB or vendor-defined request code, burst mode dr->wValue = cpu_to_le16(0x0); @@ -254,14 +254,14 @@ Wb35Reg_WriteWithCallbackValue( phw_data_t pHwData, u16 RegisterNo, u32 Register pRegQueue->Next = NULL; pRegQueue->pUsbReq = dr; pRegQueue->pUrb = pUrb; - OS_SPIN_LOCK_ACQUIRED (&pWb35Reg->EP0VM_spin_lock ); + spin_lock_irq (&pWb35Reg->EP0VM_spin_lock ); if( pWb35Reg->pRegFirst == NULL ) pWb35Reg->pRegFirst = pRegQueue; else pWb35Reg->pRegLast->Next = pRegQueue; pWb35Reg->pRegLast = pRegQueue; - OS_SPIN_LOCK_RELEASED ( &pWb35Reg->EP0VM_spin_lock ); + spin_unlock_irq ( &pWb35Reg->EP0VM_spin_lock ); // Start EP0VM Wb35Reg_EP0VM_start(pHwData); @@ -278,10 +278,10 @@ Wb35Reg_WriteWithCallbackValue( phw_data_t pHwData, u16 RegisterNo, u32 Register // FALSE : register not support // pRegisterValue : It must be a resident buffer due to asynchronous read register. unsigned char -Wb35Reg_ReadSync( phw_data_t pHwData, u16 RegisterNo, PULONG pRegisterValue ) +Wb35Reg_ReadSync( phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterValue ) { PWB35REG pWb35Reg = &pHwData->Wb35Reg; - PULONG pltmp = pRegisterValue; + u32 * pltmp = pRegisterValue; int ret = -1; // Module shutdown @@ -327,7 +327,7 @@ Wb35Reg_ReadSync( phw_data_t pHwData, u16 RegisterNo, PULONG pRegisterValue // FALSE : register not support // pRegisterValue : It must be a resident buffer due to asynchronous read register. unsigned char -Wb35Reg_Read(phw_data_t pHwData, u16 RegisterNo, PULONG pRegisterValue ) +Wb35Reg_Read(phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterValue ) { PWB35REG pWb35Reg = &pHwData->Wb35Reg; struct usb_ctrlrequest * dr; @@ -348,7 +348,7 @@ Wb35Reg_Read(phw_data_t pHwData, u16 RegisterNo, PULONG pRegisterValue ) pRegQueue->DIRECT = 0;// read register pRegQueue->INDEX = RegisterNo; pRegQueue->pBuffer = pRegisterValue; - dr = (struct usb_ctrlrequest *)((PUCHAR)pRegQueue + sizeof(REG_QUEUE)); + dr = (struct usb_ctrlrequest *)((u8 *)pRegQueue + sizeof(REG_QUEUE)); dr->bRequestType = USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN; dr->bRequest = 0x01; // USB or vendor-defined request code, burst mode dr->wValue = cpu_to_le16(0x0); @@ -359,14 +359,14 @@ Wb35Reg_Read(phw_data_t pHwData, u16 RegisterNo, PULONG pRegisterValue ) pRegQueue->Next = NULL; pRegQueue->pUsbReq = dr; pRegQueue->pUrb = pUrb; - OS_SPIN_LOCK_ACQUIRED ( &pWb35Reg->EP0VM_spin_lock ); + spin_lock_irq ( &pWb35Reg->EP0VM_spin_lock ); if( pWb35Reg->pRegFirst == NULL ) pWb35Reg->pRegFirst = pRegQueue; else pWb35Reg->pRegLast->Next = pRegQueue; pWb35Reg->pRegLast = pRegQueue; - OS_SPIN_LOCK_RELEASED( &pWb35Reg->EP0VM_spin_lock ); + spin_unlock_irq( &pWb35Reg->EP0VM_spin_lock ); // Start EP0VM Wb35Reg_EP0VM_start( pHwData ); @@ -399,7 +399,7 @@ Wb35Reg_EP0VM(phw_data_t pHwData ) PWB35REG pWb35Reg = &pHwData->Wb35Reg; PURB pUrb; struct usb_ctrlrequest *dr; - PULONG pBuffer; + u32 * pBuffer; int ret = -1; PREG_QUEUE pRegQueue; @@ -411,9 +411,9 @@ Wb35Reg_EP0VM(phw_data_t pHwData ) goto cleanup; // Get the register data and send to USB through Irp - OS_SPIN_LOCK_ACQUIRED( &pWb35Reg->EP0VM_spin_lock ); + spin_lock_irq( &pWb35Reg->EP0VM_spin_lock ); pRegQueue = pWb35Reg->pRegFirst; - OS_SPIN_LOCK_RELEASED( &pWb35Reg->EP0VM_spin_lock ); + spin_unlock_irq( &pWb35Reg->EP0VM_spin_lock ); if (!pRegQueue) goto cleanup; @@ -429,7 +429,7 @@ Wb35Reg_EP0VM(phw_data_t pHwData ) usb_fill_control_urb( pUrb, pHwData->WbUsb.udev, REG_DIRECTION(pHwData->WbUsb.udev,pRegQueue), - (PUCHAR)dr,pBuffer,cpu_to_le16(dr->wLength), + (u8 *)dr,pBuffer,cpu_to_le16(dr->wLength), Wb35Reg_EP0VM_complete, (void*)pHwData); pWb35Reg->EP0vm_state = VM_RUNNING; @@ -468,12 +468,12 @@ Wb35Reg_EP0VM_complete(PURB pUrb) OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Reg->RegFireCount ); } else { // Complete to send, remove the URB from the first - OS_SPIN_LOCK_ACQUIRED( &pWb35Reg->EP0VM_spin_lock ); + spin_lock_irq( &pWb35Reg->EP0VM_spin_lock ); pRegQueue = pWb35Reg->pRegFirst; if (pRegQueue == pWb35Reg->pRegLast) pWb35Reg->pRegLast = NULL; pWb35Reg->pRegFirst = pWb35Reg->pRegFirst->Next; - OS_SPIN_LOCK_RELEASED( &pWb35Reg->EP0VM_spin_lock ); + spin_unlock_irq( &pWb35Reg->EP0VM_spin_lock ); if (pWb35Reg->EP0VM_status) { #ifdef _PE_REG_DUMP_ @@ -513,7 +513,7 @@ Wb35Reg_destroy(phw_data_t pHwData) OS_SLEEP(10000); // Delay for waiting function enter 940623.1.b // Release all the data in RegQueue - OS_SPIN_LOCK_ACQUIRED( &pWb35Reg->EP0VM_spin_lock ); + spin_lock_irq( &pWb35Reg->EP0VM_spin_lock ); pRegQueue = pWb35Reg->pRegFirst; while (pRegQueue) { if (pRegQueue == pWb35Reg->pRegLast) @@ -521,7 +521,7 @@ Wb35Reg_destroy(phw_data_t pHwData) pWb35Reg->pRegFirst = pWb35Reg->pRegFirst->Next; pUrb = pRegQueue->pUrb; - OS_SPIN_LOCK_RELEASED( &pWb35Reg->EP0VM_spin_lock ); + spin_unlock_irq( &pWb35Reg->EP0VM_spin_lock ); if (pUrb) { usb_free_urb(pUrb); kfree(pRegQueue); @@ -530,14 +530,11 @@ Wb35Reg_destroy(phw_data_t pHwData) WBDEBUG(("EP0 queue release error\n")); #endif } - OS_SPIN_LOCK_ACQUIRED( &pWb35Reg->EP0VM_spin_lock ); + spin_lock_irq( &pWb35Reg->EP0VM_spin_lock ); pRegQueue = pWb35Reg->pRegFirst; } - OS_SPIN_LOCK_RELEASED( &pWb35Reg->EP0VM_spin_lock ); - - // Free resource - OS_SPIN_LOCK_FREE( &pWb35Reg->EP0VM_spin_lock ); + spin_unlock_irq( &pWb35Reg->EP0VM_spin_lock ); } //==================================================================================== @@ -550,7 +547,7 @@ unsigned char Wb35Reg_initial(phw_data_t pHwData) u32 SoftwareSet, VCO_trim, TxVga, Region_ScanInterval; // Spin lock is acquired for read and write IRP command - OS_SPIN_LOCK_ALLOCATE( &pWb35Reg->EP0VM_spin_lock ); + spin_lock_init( &pWb35Reg->EP0VM_spin_lock ); // Getting RF module type from EEPROM ------------------------------------ Wb35Reg_WriteSync( pHwData, 0x03b4, 0x080d0000 ); // Start EEPROM access + Read + address(0x0d) @@ -655,7 +652,7 @@ unsigned char Wb35Reg_initial(phw_data_t pHwData) // version in _GENREQ.ASM of the DWB NE1000/2000 driver. //================================================================================== u32 -CardComputeCrc(PUCHAR Buffer, u32 Length) +CardComputeCrc(u8 * Buffer, u32 Length) { u32 Crc, Carry; u32 i, j; diff --git a/drivers/staging/winbond/linux/wb35reg_f.h b/drivers/staging/winbond/linux/wb35reg_f.h index 38e2906b51a7..3006cfe99ccd 100644 --- a/drivers/staging/winbond/linux/wb35reg_f.h +++ b/drivers/staging/winbond/linux/wb35reg_f.h @@ -29,16 +29,16 @@ void EEPROMTxVgaAdjust( phw_data_t pHwData ); // 20060619.5 Add void Wb35Reg_destroy( phw_data_t pHwData ); -unsigned char Wb35Reg_Read( phw_data_t pHwData, u16 RegisterNo, PULONG pRegisterValue ); -unsigned char Wb35Reg_ReadSync( phw_data_t pHwData, u16 RegisterNo, PULONG pRegisterValue ); +unsigned char Wb35Reg_Read( phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterValue ); +unsigned char Wb35Reg_ReadSync( phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterValue ); unsigned char Wb35Reg_Write( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue ); unsigned char Wb35Reg_WriteSync( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue ); unsigned char Wb35Reg_WriteWithCallbackValue( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue, - PCHAR pValue, - s8 Len); -unsigned char Wb35Reg_BurstWrite( phw_data_t pHwData, u16 RegisterNo, PULONG pRegisterData, u8 NumberOfData, u8 Flag ); + s8 *pValue, + s8 Len); +unsigned char Wb35Reg_BurstWrite( phw_data_t pHwData, u16 RegisterNo, u32 * pRegisterData, u8 NumberOfData, u8 Flag ); void Wb35Reg_EP0VM( phw_data_t pHwData ); void Wb35Reg_EP0VM_start( phw_data_t pHwData ); @@ -47,7 +47,7 @@ void Wb35Reg_EP0VM_complete( PURB pUrb ); u32 BitReverse( u32 dwData, u32 DataLength); void CardGetMulticastBit( u8 Address[MAC_ADDR_LENGTH], u8 *Byte, u8 *Value ); -u32 CardComputeCrc( PUCHAR Buffer, u32 Length ); +u32 CardComputeCrc( u8 * Buffer, u32 Length ); void Wb35Reg_phy_calibration( phw_data_t pHwData ); void Wb35Reg_Update( phw_data_t pHwData, u16 RegisterNo, u32 RegisterValue ); diff --git a/drivers/staging/winbond/linux/wb35reg_s.h b/drivers/staging/winbond/linux/wb35reg_s.h index a7595b1e7336..8b35b93f7f02 100644 --- a/drivers/staging/winbond/linux/wb35reg_s.h +++ b/drivers/staging/winbond/linux/wb35reg_s.h @@ -75,7 +75,7 @@ typedef struct _REG_QUEUE union { u32 VALUE; - PULONG pBuffer; + u32 * pBuffer; }; u8 RESERVED[4];// space reserved for communication @@ -143,7 +143,7 @@ typedef struct _WB35REG //------------------- // VM //------------------- - OS_SPIN_LOCK EP0VM_spin_lock; // 4B + spinlock_t EP0VM_spin_lock; // 4B u32 EP0VM_status;//$$ PREG_QUEUE pRegFirst; PREG_QUEUE pRegLast; diff --git a/drivers/staging/winbond/linux/wb35rx.c b/drivers/staging/winbond/linux/wb35rx.c index 26157eb3d5a2..b4b9f5f371d9 100644 --- a/drivers/staging/winbond/linux/wb35rx.c +++ b/drivers/staging/winbond/linux/wb35rx.c @@ -27,7 +27,7 @@ void Wb35Rx_start(phw_data_t pHwData) void Wb35Rx( phw_data_t pHwData ) { PWB35RX pWb35Rx = &pHwData->Wb35Rx; - PUCHAR pRxBufferAddress; + u8 * pRxBufferAddress; PURB pUrb = (PURB)pWb35Rx->RxUrb; int retv; u32 RxBufferId; @@ -35,51 +35,50 @@ void Wb35Rx( phw_data_t pHwData ) // // Issuing URB // - do { - if (pHwData->SurpriseRemove || pHwData->HwStop) - break; + if (pHwData->SurpriseRemove || pHwData->HwStop) + goto error; - if (pWb35Rx->rx_halt) - break; + if (pWb35Rx->rx_halt) + goto error; - // Get RxBuffer's ID - RxBufferId = pWb35Rx->RxBufferId; - if (!pWb35Rx->RxOwner[RxBufferId]) { - // It's impossible to run here. - #ifdef _PE_RX_DUMP_ - WBDEBUG(("Rx driver fifo unavailable\n")); - #endif - break; - } + // Get RxBuffer's ID + RxBufferId = pWb35Rx->RxBufferId; + if (!pWb35Rx->RxOwner[RxBufferId]) { + // It's impossible to run here. + #ifdef _PE_RX_DUMP_ + WBDEBUG(("Rx driver fifo unavailable\n")); + #endif + goto error; + } - // Update buffer point, then start to bulkin the data from USB - pWb35Rx->RxBufferId++; - pWb35Rx->RxBufferId %= MAX_USB_RX_BUFFER_NUMBER; + // Update buffer point, then start to bulkin the data from USB + pWb35Rx->RxBufferId++; + pWb35Rx->RxBufferId %= MAX_USB_RX_BUFFER_NUMBER; - pWb35Rx->CurrentRxBufferId = RxBufferId; + pWb35Rx->CurrentRxBufferId = RxBufferId; - if (1 != OS_MEMORY_ALLOC((void* *)&pWb35Rx->pDRx, MAX_USB_RX_BUFFER)) { - printk("w35und: Rx memory alloc failed\n"); - break; - } - pRxBufferAddress = pWb35Rx->pDRx; + if (1 != OS_MEMORY_ALLOC((void* *)&pWb35Rx->pDRx, MAX_USB_RX_BUFFER)) { + printk("w35und: Rx memory alloc failed\n"); + goto error; + } + pRxBufferAddress = pWb35Rx->pDRx; - usb_fill_bulk_urb(pUrb, pHwData->WbUsb.udev, - usb_rcvbulkpipe(pHwData->WbUsb.udev, 3), - pRxBufferAddress, MAX_USB_RX_BUFFER, - Wb35Rx_Complete, pHwData); + usb_fill_bulk_urb(pUrb, pHwData->WbUsb.udev, + usb_rcvbulkpipe(pHwData->WbUsb.udev, 3), + pRxBufferAddress, MAX_USB_RX_BUFFER, + Wb35Rx_Complete, pHwData); - pWb35Rx->EP3vm_state = VM_RUNNING; + pWb35Rx->EP3vm_state = VM_RUNNING; - retv = wb_usb_submit_urb(pUrb); + retv = wb_usb_submit_urb(pUrb); - if (retv != 0) { - printk("Rx URB sending error\n"); - break; - } - return; - } while(FALSE); + if (retv != 0) { + printk("Rx URB sending error\n"); + goto error; + } + return; +error: // VM stop pWb35Rx->EP3vm_state = VM_STOP; OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Rx->RxFireCounter ); @@ -89,7 +88,7 @@ void Wb35Rx_Complete(PURB pUrb) { phw_data_t pHwData = pUrb->context; PWB35RX pWb35Rx = &pHwData->Wb35Rx; - PUCHAR pRxBufferAddress; + u8 * pRxBufferAddress; u32 SizeCheck; u16 BulkLength; u32 RxBufferId; @@ -99,65 +98,63 @@ void Wb35Rx_Complete(PURB pUrb) pWb35Rx->EP3vm_state = VM_COMPLETED; pWb35Rx->EP3VM_status = pUrb->status;//Store the last result of Irp - do { - RxBufferId = pWb35Rx->CurrentRxBufferId; + RxBufferId = pWb35Rx->CurrentRxBufferId; - pRxBufferAddress = pWb35Rx->pDRx; - BulkLength = (u16)pUrb->actual_length; + pRxBufferAddress = pWb35Rx->pDRx; + BulkLength = (u16)pUrb->actual_length; - // The IRP is completed - pWb35Rx->EP3vm_state = VM_COMPLETED; + // The IRP is completed + pWb35Rx->EP3vm_state = VM_COMPLETED; - if (pHwData->SurpriseRemove || pHwData->HwStop) // Must be here, or RxBufferId is invalid - break; + if (pHwData->SurpriseRemove || pHwData->HwStop) // Must be here, or RxBufferId is invalid + goto error; - if (pWb35Rx->rx_halt) - break; + if (pWb35Rx->rx_halt) + goto error; - // Start to process the data only in successful condition - pWb35Rx->RxOwner[ RxBufferId ] = 0; // Set the owner to driver - R00.value = le32_to_cpu(*(PULONG)pRxBufferAddress); + // Start to process the data only in successful condition + pWb35Rx->RxOwner[ RxBufferId ] = 0; // Set the owner to driver + R00.value = le32_to_cpu(*(u32 *)pRxBufferAddress); - // The URB is completed, check the result - if (pWb35Rx->EP3VM_status != 0) { - #ifdef _PE_USB_STATE_DUMP_ - WBDEBUG(("EP3 IoCompleteRoutine return error\n")); - DebugUsbdStatusInformation( pWb35Rx->EP3VM_status ); - #endif - pWb35Rx->EP3vm_state = VM_STOP; - break; - } + // The URB is completed, check the result + if (pWb35Rx->EP3VM_status != 0) { + #ifdef _PE_USB_STATE_DUMP_ + WBDEBUG(("EP3 IoCompleteRoutine return error\n")); + DebugUsbdStatusInformation( pWb35Rx->EP3VM_status ); + #endif + pWb35Rx->EP3vm_state = VM_STOP; + goto error; + } - // 20060220 For recovering. check if operating in single USB mode - if (!HAL_USB_MODE_BURST(pHwData)) { - SizeCheck = R00.R00_receive_byte_count; //20060926 anson's endian - if ((SizeCheck & 0x03) > 0) - SizeCheck -= 4; - SizeCheck = (SizeCheck + 3) & ~0x03; - SizeCheck += 12; // 8 + 4 badbeef - if ((BulkLength > 1600) || - (SizeCheck > 1600) || - (BulkLength != SizeCheck) || - (BulkLength == 0)) { // Add for fail Urb - pWb35Rx->EP3vm_state = VM_STOP; - pWb35Rx->Ep3ErrorCount2++; - } + // 20060220 For recovering. check if operating in single USB mode + if (!HAL_USB_MODE_BURST(pHwData)) { + SizeCheck = R00.R00_receive_byte_count; //20060926 anson's endian + if ((SizeCheck & 0x03) > 0) + SizeCheck -= 4; + SizeCheck = (SizeCheck + 3) & ~0x03; + SizeCheck += 12; // 8 + 4 badbeef + if ((BulkLength > 1600) || + (SizeCheck > 1600) || + (BulkLength != SizeCheck) || + (BulkLength == 0)) { // Add for fail Urb + pWb35Rx->EP3vm_state = VM_STOP; + pWb35Rx->Ep3ErrorCount2++; } + } - // Indicating the receiving data - pWb35Rx->ByteReceived += BulkLength; - pWb35Rx->RxBufferSize[ RxBufferId ] = BulkLength; - - if (!pWb35Rx->RxOwner[ RxBufferId ]) - Wb35Rx_indicate(pHwData); + // Indicating the receiving data + pWb35Rx->ByteReceived += BulkLength; + pWb35Rx->RxBufferSize[ RxBufferId ] = BulkLength; - kfree(pWb35Rx->pDRx); - // Do the next receive - Wb35Rx(pHwData); - return; + if (!pWb35Rx->RxOwner[ RxBufferId ]) + Wb35Rx_indicate(pHwData); - } while(FALSE); + kfree(pWb35Rx->pDRx); + // Do the next receive + Wb35Rx(pHwData); + return; +error: pWb35Rx->RxOwner[ RxBufferId ] = 1; // Set the owner to hardware OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Rx->RxFireCounter ); pWb35Rx->EP3vm_state = VM_STOP; @@ -223,7 +220,7 @@ void Wb35Rx_reset_descriptor( phw_data_t pHwData ) void Wb35Rx_adjust(PDESCRIPTOR pRxDes) { - PULONG pRxBufferAddress; + u32 * pRxBufferAddress; u32 DecryptionMethod; u32 i; u16 BufferSize; @@ -264,7 +261,7 @@ u16 Wb35Rx_indicate(phw_data_t pHwData) { DESCRIPTOR RxDes; PWB35RX pWb35Rx = &pHwData->Wb35Rx; - PUCHAR pRxBufferAddress; + u8 * pRxBufferAddress; u16 PacketSize; u16 stmp, BufferSize, stmp2 = 0; u32 RxBufferId; @@ -283,13 +280,13 @@ u16 Wb35Rx_indicate(phw_data_t pHwData) // Parse the bulkin buffer while (BufferSize >= 4) { - if ((cpu_to_le32(*(PULONG)pRxBufferAddress) & 0x0fffffff) == RX_END_TAG) //Is ending? 921002.9.a + if ((cpu_to_le32(*(u32 *)pRxBufferAddress) & 0x0fffffff) == RX_END_TAG) //Is ending? 921002.9.a break; // Get the R00 R01 first - RxDes.R00.value = le32_to_cpu(*(PULONG)pRxBufferAddress); + RxDes.R00.value = le32_to_cpu(*(u32 *)pRxBufferAddress); PacketSize = (u16)RxDes.R00.R00_receive_byte_count; - RxDes.R01.value = le32_to_cpu(*((PULONG)(pRxBufferAddress+4))); + RxDes.R01.value = le32_to_cpu(*((u32 *)(pRxBufferAddress+4))); // For new DMA 4k if ((PacketSize & 0x03) > 0) PacketSize -= 4; diff --git a/drivers/staging/winbond/linux/wb35rx_s.h b/drivers/staging/winbond/linux/wb35rx_s.h index 53b831fdeb78..b90c269e6adb 100644 --- a/drivers/staging/winbond/linux/wb35rx_s.h +++ b/drivers/staging/winbond/linux/wb35rx_s.h @@ -41,7 +41,7 @@ typedef struct _WB35RX u32 Ep3ErrorCount2; // 20060625.1 Usbd for Rx DMA error count int EP3VM_status; - PUCHAR pDRx; + u8 * pDRx; } WB35RX, *PWB35RX; diff --git a/drivers/staging/winbond/linux/wb35tx.c b/drivers/staging/winbond/linux/wb35tx.c index cf19c3bc524a..ba9d51244e29 100644 --- a/drivers/staging/winbond/linux/wb35tx.c +++ b/drivers/staging/winbond/linux/wb35tx.c @@ -12,7 +12,7 @@ unsigned char -Wb35Tx_get_tx_buffer(phw_data_t pHwData, PUCHAR *pBuffer ) +Wb35Tx_get_tx_buffer(phw_data_t pHwData, u8 **pBuffer) { PWB35TX pWb35Tx = &pHwData->Wb35Tx; @@ -37,7 +37,7 @@ void Wb35Tx(phw_data_t pHwData) { PWB35TX pWb35Tx = &pHwData->Wb35Tx; PADAPTER Adapter = pHwData->Adapter; - PUCHAR pTxBufferAddress; + u8 *pTxBufferAddress; PMDS pMds = &Adapter->Mds; struct urb * pUrb = (struct urb *)pWb35Tx->Tx4Urb; int retv; @@ -100,25 +100,24 @@ void Wb35Tx_complete(struct urb * pUrb) pWb35Tx->TxSendIndex++; pWb35Tx->TxSendIndex %= MAX_USB_TX_BUFFER_NUMBER; - do { - if (pHwData->SurpriseRemove || pHwData->HwStop) // Let WbWlanHalt to handle surprise remove - break; + if (pHwData->SurpriseRemove || pHwData->HwStop) // Let WbWlanHalt to handle surprise remove + goto error; - if (pWb35Tx->tx_halt) - break; + if (pWb35Tx->tx_halt) + goto error; - // The URB is completed, check the result - if (pWb35Tx->EP4VM_status != 0) { - printk("URB submission failed\n"); - pWb35Tx->EP4vm_state = VM_STOP; - break; // Exit while(FALSE); - } + // The URB is completed, check the result + if (pWb35Tx->EP4VM_status != 0) { + printk("URB submission failed\n"); + pWb35Tx->EP4vm_state = VM_STOP; + goto error; + } - Mds_Tx(Adapter); - Wb35Tx(pHwData); - return; - } while(FALSE); + Mds_Tx(Adapter); + Wb35Tx(pHwData); + return; +error: OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Tx->TxFireCounter ); pWb35Tx->EP4vm_state = VM_STOP; } @@ -225,36 +224,33 @@ void Wb35Tx_EP2VM(phw_data_t pHwData) { PWB35TX pWb35Tx = &pHwData->Wb35Tx; struct urb * pUrb = (struct urb *)pWb35Tx->Tx2Urb; - PULONG pltmp = (PULONG)pWb35Tx->EP2_buf; + u32 * pltmp = (u32 *)pWb35Tx->EP2_buf; int retv; - do { - if (pHwData->SurpriseRemove || pHwData->HwStop) - break; - - if (pWb35Tx->tx_halt) - break; - - // - // Issuing URB - // - usb_fill_int_urb( pUrb, pHwData->WbUsb.udev, usb_rcvintpipe(pHwData->WbUsb.udev,2), - pltmp, MAX_INTERRUPT_LENGTH, Wb35Tx_EP2VM_complete, pHwData, 32); + if (pHwData->SurpriseRemove || pHwData->HwStop) + goto error; - pWb35Tx->EP2vm_state = VM_RUNNING; - retv = wb_usb_submit_urb( pUrb ); + if (pWb35Tx->tx_halt) + goto error; - if(retv < 0) { - #ifdef _PE_TX_DUMP_ - WBDEBUG(("EP2 Tx Irp sending error\n")); - #endif - break; - } + // + // Issuing URB + // + usb_fill_int_urb( pUrb, pHwData->WbUsb.udev, usb_rcvintpipe(pHwData->WbUsb.udev,2), + pltmp, MAX_INTERRUPT_LENGTH, Wb35Tx_EP2VM_complete, pHwData, 32); - return; + pWb35Tx->EP2vm_state = VM_RUNNING; + retv = wb_usb_submit_urb( pUrb ); - } while(FALSE); + if (retv < 0) { + #ifdef _PE_TX_DUMP_ + WBDEBUG(("EP2 Tx Irp sending error\n")); + #endif + goto error; + } + return; +error: pWb35Tx->EP2vm_state = VM_STOP; OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Tx->TxResultCount ); } @@ -266,7 +262,7 @@ void Wb35Tx_EP2VM_complete(struct urb * pUrb) T02_DESCRIPTOR T02, TSTATUS; PADAPTER Adapter = (PADAPTER)pHwData->Adapter; PWB35TX pWb35Tx = &pHwData->Wb35Tx; - PULONG pltmp = (PULONG)pWb35Tx->EP2_buf; + u32 * pltmp = (u32 *)pWb35Tx->EP2_buf; u32 i; u16 InterruptInLength; @@ -275,38 +271,36 @@ void Wb35Tx_EP2VM_complete(struct urb * pUrb) pWb35Tx->EP2vm_state = VM_COMPLETED; pWb35Tx->EP2VM_status = pUrb->status; - do { - // For Linux 2.4. Interrupt will always trigger - if( pHwData->SurpriseRemove || pHwData->HwStop ) // Let WbWlanHalt to handle surprise remove - break; - - if( pWb35Tx->tx_halt ) - break; - - //The Urb is completed, check the result - if (pWb35Tx->EP2VM_status != 0) { - WBDEBUG(("EP2 IoCompleteRoutine return error\n")); - pWb35Tx->EP2vm_state= VM_STOP; - break; // Exit while(FALSE); - } - - // Update the Tx result - InterruptInLength = pUrb->actual_length; - // Modify for minimum memory access and DWORD alignment. - T02.value = cpu_to_le32(pltmp[0]) >> 8; // [31:8] -> [24:0] - InterruptInLength -= 1;// 20051221.1.c Modify the follow for more stable - InterruptInLength >>= 2; // InterruptInLength/4 - for (i=1; i<=InterruptInLength; i++) { - T02.value |= ((cpu_to_le32(pltmp[i]) & 0xff) << 24); - - TSTATUS.value = T02.value; //20061009 anson's endian - Mds_SendComplete( Adapter, &TSTATUS ); - T02.value = cpu_to_le32(pltmp[i]) >> 8; - } - - return; - } while(FALSE); + // For Linux 2.4. Interrupt will always trigger + if (pHwData->SurpriseRemove || pHwData->HwStop) // Let WbWlanHalt to handle surprise remove + goto error; + + if (pWb35Tx->tx_halt) + goto error; + + //The Urb is completed, check the result + if (pWb35Tx->EP2VM_status != 0) { + WBDEBUG(("EP2 IoCompleteRoutine return error\n")); + pWb35Tx->EP2vm_state= VM_STOP; + goto error; + } + // Update the Tx result + InterruptInLength = pUrb->actual_length; + // Modify for minimum memory access and DWORD alignment. + T02.value = cpu_to_le32(pltmp[0]) >> 8; // [31:8] -> [24:0] + InterruptInLength -= 1;// 20051221.1.c Modify the follow for more stable + InterruptInLength >>= 2; // InterruptInLength/4 + for (i = 1; i <= InterruptInLength; i++) { + T02.value |= ((cpu_to_le32(pltmp[i]) & 0xff) << 24); + + TSTATUS.value = T02.value; //20061009 anson's endian + Mds_SendComplete( Adapter, &TSTATUS ); + T02.value = cpu_to_le32(pltmp[i]) >> 8; + } + + return; +error: OS_ATOMIC_DEC( pHwData->Adapter, &pWb35Tx->TxResultCount ); pWb35Tx->EP2vm_state = VM_STOP; } diff --git a/drivers/staging/winbond/linux/wb35tx_f.h b/drivers/staging/winbond/linux/wb35tx_f.h index 7705a8454dcb..107b12918137 100644 --- a/drivers/staging/winbond/linux/wb35tx_f.h +++ b/drivers/staging/winbond/linux/wb35tx_f.h @@ -3,7 +3,7 @@ //==================================== unsigned char Wb35Tx_initial( phw_data_t pHwData ); void Wb35Tx_destroy( phw_data_t pHwData ); -unsigned char Wb35Tx_get_tx_buffer( phw_data_t pHwData, PUCHAR *pBuffer ); +unsigned char Wb35Tx_get_tx_buffer( phw_data_t pHwData, u8 **pBuffer ); void Wb35Tx_EP2VM( phw_data_t pHwData ); void Wb35Tx_EP2VM_start( phw_data_t pHwData ); diff --git a/drivers/staging/winbond/linux/wbusb.c b/drivers/staging/winbond/linux/wbusb.c index cbad5fb05959..f4a7875f2389 100644 --- a/drivers/staging/winbond/linux/wbusb.c +++ b/drivers/staging/winbond/linux/wbusb.c @@ -6,42 +6,29 @@ #include "sysdef.h" #include <net/mac80211.h> - -MODULE_AUTHOR( DRIVER_AUTHOR ); -MODULE_DESCRIPTION( DRIVER_DESC ); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); MODULE_VERSION("0.1"); - -//============================================================ -// vendor ID and product ID can into here for others -//============================================================ -static struct usb_device_id Id_Table[] = -{ - {USB_DEVICE( 0x0416, 0x0035 )}, - {USB_DEVICE( 0x18E8, 0x6201 )}, - {USB_DEVICE( 0x18E8, 0x6206 )}, - {USB_DEVICE( 0x18E8, 0x6217 )}, - {USB_DEVICE( 0x18E8, 0x6230 )}, - {USB_DEVICE( 0x18E8, 0x6233 )}, - {USB_DEVICE( 0x1131, 0x2035 )}, - { } +static struct usb_device_id wb35_table[] __devinitdata = { + {USB_DEVICE(0x0416, 0x0035)}, + {USB_DEVICE(0x18E8, 0x6201)}, + {USB_DEVICE(0x18E8, 0x6206)}, + {USB_DEVICE(0x18E8, 0x6217)}, + {USB_DEVICE(0x18E8, 0x6230)}, + {USB_DEVICE(0x18E8, 0x6233)}, + {USB_DEVICE(0x1131, 0x2035)}, + { 0, } }; -MODULE_DEVICE_TABLE(usb, Id_Table); +MODULE_DEVICE_TABLE(usb, wb35_table); -static struct usb_driver wb35_driver = { - .name = "w35und", - .probe = wb35_probe, - .disconnect = wb35_disconnect, - .id_table = Id_Table, -}; - -static const struct ieee80211_rate wbsoft_rates[] = { +static struct ieee80211_rate wbsoft_rates[] = { { .bitrate = 10, .flags = IEEE80211_RATE_SHORT_PREAMBLE }, }; -static const struct ieee80211_channel wbsoft_channels[] = { +static struct ieee80211_channel wbsoft_channels[] = { { .center_freq = 2412}, }; @@ -62,9 +49,22 @@ static void wbsoft_remove_interface(struct ieee80211_hw *dev, printk("wbsoft_remove interface called\n"); } -static int wbsoft_nop(void) +static void wbsoft_stop(struct ieee80211_hw *hw) +{ + printk(KERN_INFO "%s called\n", __func__); +} + +static int wbsoft_get_stats(struct ieee80211_hw *hw, + struct ieee80211_low_level_stats *stats) { - printk("wbsoft_nop called\n"); + printk(KERN_INFO "%s called\n", __func__); + return 0; +} + +static int wbsoft_get_tx_stats(struct ieee80211_hw *hw, + struct ieee80211_tx_queue_stats *stats) +{ + printk(KERN_INFO "%s called\n", __func__); return 0; } @@ -105,8 +105,7 @@ static void wbsoft_configure_filter(struct ieee80211_hw *dev, *total_flags = new_flags; } -static int wbsoft_tx(struct ieee80211_hw *dev, struct sk_buff *skb, - struct ieee80211_tx_control *control) +static int wbsoft_tx(struct ieee80211_hw *dev, struct sk_buff *skb) { char *buffer = kmalloc(skb->len, GFP_ATOMIC); printk("Sending frame %d bytes\n", skb->len); @@ -136,7 +135,7 @@ static int wbsoft_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) hal_set_current_channel(&my_adapter->sHwData, ch); hal_set_beacon_period(&my_adapter->sHwData, conf->beacon_int); // hal_set_cap_info(&my_adapter->sHwData, ?? ); -// hal_set_ssid(phw_data_t pHwData, PUCHAR pssid, u8 ssid_len); ?? +// hal_set_ssid(phw_data_t pHwData, u8 * pssid, u8 ssid_len); ?? hal_set_accept_broadcast(&my_adapter->sHwData, 1); hal_set_accept_promiscuous(&my_adapter->sHwData, 1); hal_set_accept_multicast(&my_adapter->sHwData, 1); @@ -148,7 +147,7 @@ static int wbsoft_config(struct ieee80211_hw *dev, struct ieee80211_conf *conf) // hal_start_bss(&my_adapter->sHwData, WLAN_BSSTYPE_INFRASTRUCTURE); ?? -//void hal_set_rates(phw_data_t pHwData, PUCHAR pbss_rates, +//void hal_set_rates(phw_data_t pHwData, u8 * pbss_rates, // u8 length, unsigned char basic_rate_set) return 0; @@ -171,14 +170,14 @@ static u64 wbsoft_get_tsf(struct ieee80211_hw *dev) static const struct ieee80211_ops wbsoft_ops = { .tx = wbsoft_tx, .start = wbsoft_start, /* Start can be pretty much empty as we do WbWLanInitialize() during probe? */ - .stop = wbsoft_nop, + .stop = wbsoft_stop, .add_interface = wbsoft_add_interface, .remove_interface = wbsoft_remove_interface, .config = wbsoft_config, .config_interface = wbsoft_config_interface, .configure_filter = wbsoft_configure_filter, - .get_stats = wbsoft_nop, - .get_tx_stats = wbsoft_nop, + .get_stats = wbsoft_get_stats, + .get_tx_stats = wbsoft_get_tx_stats, .get_tsf = wbsoft_get_tsf, // conf_tx: hal_set_cwmin()/hal_set_cwmax; }; @@ -187,21 +186,6 @@ struct wbsoft_priv { }; -int __init wb35_init(void) -{ - printk("[w35und]driver init\n"); - return usb_register(&wb35_driver); -} - -void __exit wb35_exit(void) -{ - printk("[w35und]driver exit\n"); - usb_deregister( &wb35_driver ); -} - -module_init(wb35_init); -module_exit(wb35_exit); - // Usb kernel subsystem will call this function when a new device is plugged into. int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table) { @@ -210,7 +194,7 @@ int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table) PWBUSB pWbUsb; struct usb_host_interface *interface; struct usb_endpoint_descriptor *endpoint; - int i, ret = -1; + int ret = -1; u32 ltmp; struct usb_device *udev = interface_to_usbdev(intf); @@ -218,114 +202,95 @@ int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id_table) printk("[w35und]wb35_probe ->\n"); - do { - for (i=0; i<(sizeof(Id_Table)/sizeof(struct usb_device_id)); i++ ) { - if ((udev->descriptor.idVendor == Id_Table[i].idVendor) && - (udev->descriptor.idProduct == Id_Table[i].idProduct)) { - printk("[w35und]Found supported hardware\n"); - break; - } - } - if ((i == (sizeof(Id_Table)/sizeof(struct usb_device_id)))) { - #ifdef _PE_USB_INI_DUMP_ - WBDEBUG(("[w35und] This is not the one we are interested about\n")); - #endif - return -ENODEV; - } - - // 20060630.2 Check the device if it already be opened - ret = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ), - 0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN, - 0x0, 0x400, <mp, 4, HZ*100 ); - if( ret < 0 ) - break; + // 20060630.2 Check the device if it already be opened + ret = usb_control_msg(udev, usb_rcvctrlpipe( udev, 0 ), + 0x01, USB_TYPE_VENDOR|USB_RECIP_DEVICE|USB_DIR_IN, + 0x0, 0x400, <mp, 4, HZ*100 ); + if (ret < 0) + goto error; - ltmp = cpu_to_le32(ltmp); - if (ltmp) // Is already initialized? - break; + ltmp = cpu_to_le32(ltmp); + if (ltmp) // Is already initialized? + goto error; + Adapter = kzalloc(sizeof(ADAPTER), GFP_KERNEL); - Adapter = kzalloc(sizeof(ADAPTER), GFP_KERNEL); + my_adapter = Adapter; + pWbLinux = &Adapter->WbLinux; + pWbUsb = &Adapter->sHwData.WbUsb; + pWbUsb->udev = udev; - my_adapter = Adapter; - pWbLinux = &Adapter->WbLinux; - pWbUsb = &Adapter->sHwData.WbUsb; - pWbUsb->udev = udev; + interface = intf->cur_altsetting; + endpoint = &interface->endpoint[0].desc; - interface = intf->cur_altsetting; - endpoint = &interface->endpoint[0].desc; - - if (endpoint[2].wMaxPacketSize == 512) { - printk("[w35und] Working on USB 2.0\n"); - pWbUsb->IsUsb20 = 1; - } - - if (!WbWLanInitialize(Adapter)) { - printk("[w35und]WbWLanInitialize fail\n"); - break; - } + if (endpoint[2].wMaxPacketSize == 512) { + printk("[w35und] Working on USB 2.0\n"); + pWbUsb->IsUsb20 = 1; + } - { - struct wbsoft_priv *priv; - struct ieee80211_hw *dev; - int res; + if (!WbWLanInitialize(Adapter)) { + printk("[w35und]WbWLanInitialize fail\n"); + goto error; + } - dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops); + { + struct wbsoft_priv *priv; + struct ieee80211_hw *dev; + static struct ieee80211_supported_band band; + int res; - if (!dev) { - printk("w35und: ieee80211 alloc failed\n" ); - BUG(); - } + dev = ieee80211_alloc_hw(sizeof(*priv), &wbsoft_ops); - my_dev = dev; + if (!dev) { + printk("w35und: ieee80211 alloc failed\n" ); + BUG(); + } - SET_IEEE80211_DEV(dev, &udev->dev); - { - phw_data_t pHwData = &Adapter->sHwData; - unsigned char dev_addr[MAX_ADDR_LEN]; - hal_get_permanent_address(pHwData, dev_addr); - SET_IEEE80211_PERM_ADDR(dev, dev_addr); - } + my_dev = dev; + SET_IEEE80211_DEV(dev, &udev->dev); + { + phw_data_t pHwData = &Adapter->sHwData; + unsigned char dev_addr[MAX_ADDR_LEN]; + hal_get_permanent_address(pHwData, dev_addr); + SET_IEEE80211_PERM_ADDR(dev, dev_addr); + } - dev->extra_tx_headroom = 12; /* FIXME */ - dev->flags = 0; - dev->channel_change_time = 1000; -// dev->max_rssi = 100; + dev->extra_tx_headroom = 12; /* FIXME */ + dev->flags = 0; - dev->queues = 1; + dev->channel_change_time = 1000; +// dev->max_rssi = 100; - static struct ieee80211_supported_band band; + dev->queues = 1; - band.channels = wbsoft_channels; - band.n_channels = ARRAY_SIZE(wbsoft_channels); - band.bitrates = wbsoft_rates; - band.n_bitrates = ARRAY_SIZE(wbsoft_rates); + band.channels = wbsoft_channels; + band.n_channels = ARRAY_SIZE(wbsoft_channels); + band.bitrates = wbsoft_rates; + band.n_bitrates = ARRAY_SIZE(wbsoft_rates); - dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band; + dev->wiphy->bands[IEEE80211_BAND_2GHZ] = &band; #if 0 - wbsoft_modes[0].num_channels = 1; - wbsoft_modes[0].channels = wbsoft_channels; - wbsoft_modes[0].mode = MODE_IEEE80211B; - wbsoft_modes[0].num_rates = ARRAY_SIZE(wbsoft_rates); - wbsoft_modes[0].rates = wbsoft_rates; - - res = ieee80211_register_hwmode(dev, &wbsoft_modes[0]); - BUG_ON(res); + wbsoft_modes[0].num_channels = 1; + wbsoft_modes[0].channels = wbsoft_channels; + wbsoft_modes[0].mode = MODE_IEEE80211B; + wbsoft_modes[0].num_rates = ARRAY_SIZE(wbsoft_rates); + wbsoft_modes[0].rates = wbsoft_rates; + + res = ieee80211_register_hwmode(dev, &wbsoft_modes[0]); + BUG_ON(res); #endif - res = ieee80211_register_hw(dev); - BUG_ON(res); - } - - usb_set_intfdata( intf, Adapter ); - - printk("[w35und] _probe OK\n"); - return 0; + res = ieee80211_register_hw(dev); + BUG_ON(res); + } - } while(FALSE); + usb_set_intfdata( intf, Adapter ); + printk("[w35und] _probe OK\n"); + return 0; +error: return -ENOMEM; } @@ -401,4 +366,22 @@ void wb35_disconnect(struct usb_interface *intf) } +static struct usb_driver wb35_driver = { + .name = "w35und", + .id_table = wb35_table, + .probe = wb35_probe, + .disconnect = wb35_disconnect, +}; +static int __init wb35_init(void) +{ + return usb_register(&wb35_driver); +} + +static void __exit wb35_exit(void) +{ + usb_deregister(&wb35_driver); +} + +module_init(wb35_init); +module_exit(wb35_exit); diff --git a/drivers/staging/winbond/mds.c b/drivers/staging/winbond/mds.c index 8ce6389c4135..f1de813f9c76 100644 --- a/drivers/staging/winbond/mds.c +++ b/drivers/staging/winbond/mds.c @@ -40,7 +40,7 @@ Mds_Tx(PADAPTER Adapter) PMDS pMds = &Adapter->Mds; DESCRIPTOR TxDes; PDESCRIPTOR pTxDes = &TxDes; - PUCHAR XmitBufAddress; + u8 *XmitBufAddress; u16 XmitBufSize, PacketSize, stmp, CurrentSize, FragmentThreshold; u8 FillIndex, TxDesIndex, FragmentCount, FillCount; unsigned char BufferFilled = FALSE, MICAdd = 0; @@ -90,7 +90,7 @@ Mds_Tx(PADAPTER Adapter) BufferFilled = TRUE; /* Leaves first u8 intact */ - memset((PUCHAR)pTxDes + 1, 0, sizeof(DESCRIPTOR) - 1); + memset((u8 *)pTxDes + 1, 0, sizeof(DESCRIPTOR) - 1); TxDesIndex = pMds->TxDesIndex;//Get the current ID pTxDes->Descriptor_ID = TxDesIndex; @@ -229,10 +229,10 @@ Mds_SendComplete(PADAPTER Adapter, PT02_DESCRIPTOR pT02) } void -Mds_HeaderCopy(PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer) +Mds_HeaderCopy(PADAPTER Adapter, PDESCRIPTOR pDes, u8 *TargetBuffer) { PMDS pMds = &Adapter->Mds; - PUCHAR src_buffer = pDes->buffer_address[0];//931130.5.g + u8 *src_buffer = pDes->buffer_address[0];//931130.5.g PT00_DESCRIPTOR pT00; PT01_DESCRIPTOR pT01; u16 stmp; @@ -276,7 +276,7 @@ Mds_HeaderCopy(PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer) // // Set tx rate // - stmp = *(PUSHORT)(TargetBuffer+30); // 2n alignment address + stmp = *(u16 *)(TargetBuffer+30); // 2n alignment address //Use basic rate ctmp1 = ctmpf = CURRENT_TX_RATE_FOR_MNG; @@ -326,11 +326,13 @@ Mds_HeaderCopy(PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer) // The function return the 4n size of usb pk u16 -Mds_BodyCopy(PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer) +Mds_BodyCopy(PADAPTER Adapter, PDESCRIPTOR pDes, u8 *TargetBuffer) { PT00_DESCRIPTOR pT00; PMDS pMds = &Adapter->Mds; - PUCHAR buffer, src_buffer, pctmp; + u8 *buffer; + u8 *src_buffer; + u8 *pctmp; u16 Size = 0; u16 SizeLeft, CopySize, CopyLeft, stmp; u8 buf_index, FragmentCount = 0; @@ -354,7 +356,7 @@ Mds_BodyCopy(PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer) SizeLeft -= CopySize; // 1 Byte operation - pctmp = (PUCHAR)( buffer + 8 + DOT_11_SEQUENCE_OFFSET ); + pctmp = (u8 *)( buffer + 8 + DOT_11_SEQUENCE_OFFSET ); *pctmp &= 0xf0; *pctmp |= FragmentCount;//931130.5.m if( !FragmentCount ) @@ -379,7 +381,7 @@ Mds_BodyCopy(PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer) buf_index++; buf_index %= MAX_DESCRIPTOR_BUFFER_INDEX; } else { - PUCHAR pctmp = pDes->buffer_address[buf_index]; + u8 *pctmp = pDes->buffer_address[buf_index]; pctmp += CopySize; pDes->buffer_address[buf_index] = pctmp; pDes->buffer_size[buf_index] -= CopySize; @@ -419,7 +421,7 @@ Mds_BodyCopy(PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer) pT00->T00_last_mpdu = 1; pT00->T00_IsLastMpdu = 1; - buffer = (PUCHAR)pT00 + 8; // +8 for USB hdr + buffer = (u8 *)pT00 + 8; // +8 for USB hdr buffer[1] &= ~0x04; // Clear more frag bit of 802.11 frame control pDes->FragmentCount = FragmentCount; // Update the correct fragment number return Size; @@ -427,7 +429,7 @@ Mds_BodyCopy(PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer) void -Mds_DurationSet( PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR buffer ) +Mds_DurationSet( PADAPTER Adapter, PDESCRIPTOR pDes, u8 *buffer ) { PT00_DESCRIPTOR pT00; PT01_DESCRIPTOR pT01; @@ -435,7 +437,7 @@ Mds_DurationSet( PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR buffer ) u8 Rate, i; unsigned char CTS_on = FALSE, RTS_on = FALSE; PT00_DESCRIPTOR pNextT00; - u16 BodyLen; + u16 BodyLen = 0; unsigned char boGroupAddr = FALSE; @@ -574,7 +576,7 @@ Mds_DurationSet( PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR buffer ) DEFAULT_SIFSTIME*3 ); } - ((PUSHORT)buffer)[5] = cpu_to_le16(Duration);// 4 USHOR for skip 8B USB, 2USHORT=FC + Duration + ((u16 *)buffer)[5] = cpu_to_le16(Duration);// 4 USHOR for skip 8B USB, 2USHORT=FC + Duration //----20061009 add by anson's endian pNextT00->value = cpu_to_le32(pNextT00->value); @@ -615,7 +617,7 @@ Mds_DurationSet( PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR buffer ) } } - ((PUSHORT)buffer)[5] = cpu_to_le16(Duration);// 4 USHOR for skip 8B USB, 2USHORT=FC + Duration + ((u16 *)buffer)[5] = cpu_to_le16(Duration);// 4 USHOR for skip 8B USB, 2USHORT=FC + Duration pT00->value = cpu_to_le32(pT00->value); pT01->value = cpu_to_le32(pT01->value); //--end 20061009 add diff --git a/drivers/staging/winbond/mds_f.h b/drivers/staging/winbond/mds_f.h index 651188be1065..7a682d4cfbdc 100644 --- a/drivers/staging/winbond/mds_f.h +++ b/drivers/staging/winbond/mds_f.h @@ -1,9 +1,9 @@ unsigned char Mds_initial( PADAPTER Adapter ); void Mds_Destroy( PADAPTER Adapter ); void Mds_Tx( PADAPTER Adapter ); -void Mds_HeaderCopy( PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer ); -u16 Mds_BodyCopy( PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer ); -void Mds_DurationSet( PADAPTER Adapter, PDESCRIPTOR pDes, PUCHAR TargetBuffer ); +void Mds_HeaderCopy( PADAPTER Adapter, PDESCRIPTOR pDes, u8 *TargetBuffer ); +u16 Mds_BodyCopy( PADAPTER Adapter, PDESCRIPTOR pDes, u8 *TargetBuffer ); +void Mds_DurationSet( PADAPTER Adapter, PDESCRIPTOR pDes, u8 *TargetBuffer ); void Mds_SendComplete( PADAPTER Adapter, PT02_DESCRIPTOR pT02 ); void Mds_MpduProcess( PADAPTER Adapter, PDESCRIPTOR pRxDes ); void Mds_reset_descriptor( PADAPTER Adapter ); diff --git a/drivers/staging/winbond/mds_s.h b/drivers/staging/winbond/mds_s.h index 4738279d5f39..9df2e0936bf8 100644 --- a/drivers/staging/winbond/mds_s.h +++ b/drivers/staging/winbond/mds_s.h @@ -86,7 +86,7 @@ typedef struct _MDS { // For Tx usage u8 TxOwner[ ((MAX_USB_TX_BUFFER_NUMBER + 3) & ~0x03) ]; - PUCHAR pTxBuffer; + u8 *pTxBuffer; u16 TxBufferSize[ ((MAX_USB_TX_BUFFER_NUMBER + 1) & ~0x01) ]; u8 TxDesFrom[ ((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03) ];//931130.4.u // 1: MLME 2: NDIS control 3: NDIS data u8 TxCountInBuffer[ ((MAX_USB_TX_DESCRIPTOR + 3) & ~0x03) ]; // 20060928 @@ -103,7 +103,7 @@ typedef struct _MDS u16 TxResult[ ((MAX_USB_TX_DESCRIPTOR + 1) & ~0x01) ];//Collect the sending result of Mpdu u8 MicRedundant[8]; // For tmp use - PUCHAR MicWriteAddress[2]; //The start address to fill the Mic, use 2 point due to Mic maybe fragment + u8 *MicWriteAddress[2]; //The start address to fill the Mic, use 2 point due to Mic maybe fragment u16 MicWriteSize[2]; //931130.4.x @@ -144,7 +144,7 @@ typedef struct _MDS typedef struct _RxBuffer { - PUCHAR pBufferAddress; // Pointer the received data buffer. + u8 * pBufferAddress; // Pointer the received data buffer. u16 BufferSize; u8 RESERVED; u8 BufferIndex;// Only 1 byte @@ -176,7 +176,7 @@ typedef struct _RXLAYER1 ///////////////////////////////////////////////////////////////////////////////////////////// // For brand-new Rx system u8 ReservedBuffer[ 2400 ];//If Buffer ID is reserved one, it must copy the data into this area - PUCHAR ReservedBufferPoint;// Point to the next availabe address of reserved buffer + u8 *ReservedBufferPoint;// Point to the next availabe address of reserved buffer }RXLAYER1, * PRXLAYER1; diff --git a/drivers/staging/winbond/mlme_s.h b/drivers/staging/winbond/mlme_s.h index 58094f61c032..039fd408ba62 100644 --- a/drivers/staging/winbond/mlme_s.h +++ b/drivers/staging/winbond/mlme_s.h @@ -125,12 +125,12 @@ typedef struct _MLME_FRAME { //NDIS_PACKET MLME_Packet; - PCHAR pMMPDU; + s8 * pMMPDU; u16 len; u8 DataType; u8 IsInUsed; - OS_SPIN_LOCK MLMESpinLock; + spinlock_t MLMESpinLock; u8 TxMMPDU[MAX_NUM_TX_MMPDU][MAX_MMPDU_SIZE]; u8 TxMMPDUInUse[ (MAX_NUM_TX_MMPDU+3) & ~0x03 ]; diff --git a/drivers/staging/winbond/mlmetxrx.c b/drivers/staging/winbond/mlmetxrx.c index 46b091e96794..e8533b8d1976 100644 --- a/drivers/staging/winbond/mlmetxrx.c +++ b/drivers/staging/winbond/mlmetxrx.c @@ -113,13 +113,13 @@ MLME_GetNextPacket(PADAPTER Adapter, PDESCRIPTOR pDes) pDes->Type = Adapter->sMlmeFrame.DataType; } -void MLMEfreeMMPDUBuffer(PWB32_ADAPTER Adapter, PCHAR pData) +void MLMEfreeMMPDUBuffer(PWB32_ADAPTER Adapter, s8 *pData) { int i; // Reclaim the data buffer for (i = 0; i < MAX_NUM_TX_MMPDU; i++) { - if (pData == (PCHAR)&(Adapter->sMlmeFrame.TxMMPDU[i])) + if (pData == (s8 *)&(Adapter->sMlmeFrame.TxMMPDU[i])) break; } if (Adapter->sMlmeFrame.TxMMPDUInUse[i]) diff --git a/drivers/staging/winbond/mlmetxrx_f.h b/drivers/staging/winbond/mlmetxrx_f.h index d74e225be215..24cd5f308d9f 100644 --- a/drivers/staging/winbond/mlmetxrx_f.h +++ b/drivers/staging/winbond/mlmetxrx_f.h @@ -20,7 +20,7 @@ MLMEGetMMPDUBuffer( PWB32_ADAPTER Adapter ); -void MLMEfreeMMPDUBuffer( PWB32_ADAPTER Adapter, PCHAR pData); +void MLMEfreeMMPDUBuffer( PWB32_ADAPTER Adapter, s8 * pData); void MLME_GetNextPacket( PADAPTER Adapter, PDESCRIPTOR pDes ); u8 MLMESendFrame( PWB32_ADAPTER Adapter, @@ -42,7 +42,7 @@ MLMERcvFrame( void MLMEReturnPacket( PWB32_ADAPTER Adapter, - PUCHAR pRxBufer + u8 * pRxBufer ); #ifdef _IBSS_BEACON_SEQ_STICK_ s8 SendBCNullData(PWB32_ADAPTER Adapter, u16 wIdx); diff --git a/drivers/staging/winbond/reg.c b/drivers/staging/winbond/reg.c index b475c7a7c424..57af5b831509 100644 --- a/drivers/staging/winbond/reg.c +++ b/drivers/staging/winbond/reg.c @@ -922,16 +922,16 @@ Uxx_ReadEthernetAddress( phw_data_t pHwData ) // Only unplug and plug again can make hardware read EEPROM again. 20060727 Wb35Reg_WriteSync( pHwData, 0x03b4, 0x08000000 ); // Start EEPROM access + Read + address(0x0d) Wb35Reg_ReadSync( pHwData, 0x03b4, <mp ); - *(PUSHORT)pHwData->PermanentMacAddress = cpu_to_le16((u16)ltmp); //20060926 anson's endian + *(u16 *)pHwData->PermanentMacAddress = cpu_to_le16((u16)ltmp); //20060926 anson's endian Wb35Reg_WriteSync( pHwData, 0x03b4, 0x08010000 ); // Start EEPROM access + Read + address(0x0d) Wb35Reg_ReadSync( pHwData, 0x03b4, <mp ); - *(PUSHORT)(pHwData->PermanentMacAddress + 2) = cpu_to_le16((u16)ltmp); //20060926 anson's endian + *(u16 *)(pHwData->PermanentMacAddress + 2) = cpu_to_le16((u16)ltmp); //20060926 anson's endian Wb35Reg_WriteSync( pHwData, 0x03b4, 0x08020000 ); // Start EEPROM access + Read + address(0x0d) Wb35Reg_ReadSync( pHwData, 0x03b4, <mp ); - *(PUSHORT)(pHwData->PermanentMacAddress + 4) = cpu_to_le16((u16)ltmp); //20060926 anson's endian - *(PUSHORT)(pHwData->PermanentMacAddress + 6) = 0; - Wb35Reg_WriteSync( pHwData, 0x03e8, cpu_to_le32(*(PULONG)pHwData->PermanentMacAddress) ); //20060926 anson's endian - Wb35Reg_WriteSync( pHwData, 0x03ec, cpu_to_le32(*(PULONG)(pHwData->PermanentMacAddress+4)) ); //20060926 anson's endian + *(u16 *)(pHwData->PermanentMacAddress + 4) = cpu_to_le16((u16)ltmp); //20060926 anson's endian + *(u16 *)(pHwData->PermanentMacAddress + 6) = 0; + Wb35Reg_WriteSync( pHwData, 0x03e8, cpu_to_le32(*(u32 *)pHwData->PermanentMacAddress) ); //20060926 anson's endian + Wb35Reg_WriteSync( pHwData, 0x03ec, cpu_to_le32(*(u32 *)(pHwData->PermanentMacAddress+4)) ); //20060926 anson's endian } @@ -1038,7 +1038,7 @@ void RFSynthesizer_initial(phw_data_t pHwData) { u32 altmp[32]; - PULONG pltmp = altmp; + u32 * pltmp = altmp; u32 ltmp; u8 number=0x00; // The number of register vale u8 i; @@ -2358,11 +2358,11 @@ void Mxx_initial( phw_data_t pHwData ) pltmp[2] = pWb35Reg->M2C_MacControl; // M30 BSSID - pltmp[3] = *(PULONG)pHwData->bssid; + pltmp[3] = *(u32 *)pHwData->bssid; // M34 pHwData->AID = DEFAULT_AID; - tmp = *(PUSHORT)(pHwData->bssid+4); + tmp = *(u16 *)(pHwData->bssid+4); tmp |= DEFAULT_AID << 16; pltmp[4] = tmp; @@ -2428,7 +2428,7 @@ void GetTxVgaFromEEPROM( phw_data_t pHwData ) { u32 i, j, ltmp; u16 Value[MAX_TXVGA_EEPROM]; - PUCHAR pctmp; + u8 *pctmp; u8 ctmp=0; // Get the entire TxVga setting in EEPROM @@ -2441,7 +2441,7 @@ void GetTxVgaFromEEPROM( phw_data_t pHwData ) } // Adjust the filed which fills with reserved value. - pctmp = (PUCHAR)Value; + pctmp = (u8 *)Value; for( i=0; i<(MAX_TXVGA_EEPROM*2); i++ ) { if( pctmp[i] != 0xff ) @@ -2480,7 +2480,7 @@ void GetTxVgaFromEEPROM( phw_data_t pHwData ) // This function will use default TxVgaSettingInEEPROM data to calculate new TxVga. void EEPROMTxVgaAdjust( phw_data_t pHwData ) // 20060619.5 Add { - PUCHAR pTxVga = pHwData->TxVgaSettingInEEPROM; + u8 * pTxVga = pHwData->TxVgaSettingInEEPROM; s16 i, stmp; //-- 2.4G -- 20060704.2 Request from Tiger diff --git a/drivers/staging/winbond/sme_api.c b/drivers/staging/winbond/sme_api.c index 40e93b7600eb..31c9673ea865 100644 --- a/drivers/staging/winbond/sme_api.c +++ b/drivers/staging/winbond/sme_api.c @@ -10,4 +10,5 @@ s8 sme_get_rssi(void *pcore_data, s32 *prssi) { BUG(); + return 0; } diff --git a/drivers/staging/winbond/sme_api.h b/drivers/staging/winbond/sme_api.h index 016b225ca4a4..745eb376bc70 100644 --- a/drivers/staging/winbond/sme_api.h +++ b/drivers/staging/winbond/sme_api.h @@ -208,7 +208,7 @@ s8 sme_set_tx_antenna(void *pcore_data, u32 TxAntenna); s8 sme_set_IBSS_chan(void *pcore_data, ChanInfo chan); //20061108 WPS -s8 sme_set_IE_append(void *pcore_data, PUCHAR buffer, u16 buf_len); +s8 sme_set_IE_append(void *pcore_data, u8 *buffer, u16 buf_len); diff --git a/drivers/staging/winbond/wbhal.c b/drivers/staging/winbond/wbhal.c index daf442247558..5d68ecec34c7 100644 --- a/drivers/staging/winbond/wbhal.c +++ b/drivers/staging/winbond/wbhal.c @@ -1,13 +1,13 @@ #include "os_common.h" -void hal_get_ethernet_address( phw_data_t pHwData, PUCHAR current_address ) +void hal_get_ethernet_address( phw_data_t pHwData, u8 *current_address ) { if( pHwData->SurpriseRemove ) return; memcpy( current_address, pHwData->CurrentMacAddress, ETH_LENGTH_OF_ADDRESS ); } -void hal_set_ethernet_address( phw_data_t pHwData, PUCHAR current_address ) +void hal_set_ethernet_address( phw_data_t pHwData, u8 *current_address ) { u32 ltmp[2]; @@ -15,13 +15,13 @@ void hal_set_ethernet_address( phw_data_t pHwData, PUCHAR current_address ) memcpy( pHwData->CurrentMacAddress, current_address, ETH_LENGTH_OF_ADDRESS ); - ltmp[0]= cpu_to_le32( *(PULONG)pHwData->CurrentMacAddress ); - ltmp[1]= cpu_to_le32( *(PULONG)(pHwData->CurrentMacAddress + 4) ) & 0xffff; + ltmp[0]= cpu_to_le32( *(u32 *)pHwData->CurrentMacAddress ); + ltmp[1]= cpu_to_le32( *(u32 *)(pHwData->CurrentMacAddress + 4) ) & 0xffff; Wb35Reg_BurstWrite( pHwData, 0x03e8, ltmp, 2, AUTO_INCREMENT ); } -void hal_get_permanent_address( phw_data_t pHwData, PUCHAR pethernet_address ) +void hal_get_permanent_address( phw_data_t pHwData, u8 *pethernet_address ) { if( pHwData->SurpriseRemove ) return; @@ -89,7 +89,7 @@ void hal_halt(phw_data_t pHwData, void *ppa_data) } //--------------------------------------------------------------------------------------------------- -void hal_set_rates(phw_data_t pHwData, PUCHAR pbss_rates, +void hal_set_rates(phw_data_t pHwData, u8 *pbss_rates, u8 length, unsigned char basic_rate_set) { PWB35REG pWb35Reg = &pHwData->Wb35Reg; @@ -158,13 +158,13 @@ void hal_set_rates(phw_data_t pHwData, PUCHAR pbss_rates, // Fill data into support rate until buffer full //---20060926 add by anson's endian for (i=0; i<4; i++) - *(PULONG)(SupportedRate+(i<<2)) = cpu_to_le32( *(PULONG)(SupportedRate+(i<<2)) ); + *(u32 *)(SupportedRate+(i<<2)) = cpu_to_le32( *(u32 *)(SupportedRate+(i<<2)) ); //--- end 20060926 add by anson's endian - Wb35Reg_BurstWrite( pHwData,0x087c, (PULONG)SupportedRate, 4, AUTO_INCREMENT ); - pWb35Reg->M7C_MacControl = ((PULONG)SupportedRate)[0]; - pWb35Reg->M80_MacControl = ((PULONG)SupportedRate)[1]; - pWb35Reg->M84_MacControl = ((PULONG)SupportedRate)[2]; - pWb35Reg->M88_MacControl = ((PULONG)SupportedRate)[3]; + Wb35Reg_BurstWrite( pHwData,0x087c, (u32 *)SupportedRate, 4, AUTO_INCREMENT ); + pWb35Reg->M7C_MacControl = ((u32 *)SupportedRate)[0]; + pWb35Reg->M80_MacControl = ((u32 *)SupportedRate)[1]; + pWb35Reg->M84_MacControl = ((u32 *)SupportedRate)[2]; + pWb35Reg->M88_MacControl = ((u32 *)SupportedRate)[3]; // Fill length tmp = Count1<<28 | Count2<<24; @@ -206,7 +206,7 @@ void hal_set_current_channel_ex( phw_data_t pHwData, ChanInfo channel ) pWb35Reg->M28_MacControl &= ~0xff; // Clean channel information field pWb35Reg->M28_MacControl |= channel.ChanNo; Wb35Reg_WriteWithCallbackValue( pHwData, 0x0828, pWb35Reg->M28_MacControl, - (PCHAR)&channel, sizeof(ChanInfo)); + (s8 *)&channel, sizeof(ChanInfo)); } //--------------------------------------------------------------------------------------------------- void hal_set_current_channel( phw_data_t pHwData, ChanInfo channel ) @@ -277,7 +277,7 @@ void hal_set_accept_beacon( phw_data_t pHwData, u8 enable ) Wb35Reg_Write( pHwData, 0x0800, pWb35Reg->M00_MacControl ); } //--------------------------------------------------------------------------------------------------- -void hal_set_multicast_address( phw_data_t pHwData, PUCHAR address, u8 number ) +void hal_set_multicast_address( phw_data_t pHwData, u8 *address, u8 number ) { PWB35REG pWb35Reg = &pHwData->Wb35Reg; u8 Byte, Bit; @@ -297,7 +297,7 @@ void hal_set_multicast_address( phw_data_t pHwData, PUCHAR address, u8 number ) } // Updating register - Wb35Reg_BurstWrite( pHwData, 0x0804, (PULONG)pWb35Reg->Multicast, 2, AUTO_INCREMENT ); + Wb35Reg_BurstWrite( pHwData, 0x0804, (u32 *)pWb35Reg->Multicast, 2, AUTO_INCREMENT ); } //--------------------------------------------------------------------------------------------------- u8 hal_get_accept_beacon( phw_data_t pHwData ) @@ -806,7 +806,7 @@ u8 hal_get_hw_radio_off( phw_data_t pHwData ) } } -unsigned char hal_get_dxx_reg( phw_data_t pHwData, u16 number, PULONG pValue ) +unsigned char hal_get_dxx_reg( phw_data_t pHwData, u16 number, u32 * pValue ) { if( number < 0x1000 ) number += 0x1000; diff --git a/drivers/staging/winbond/wbhal_f.h b/drivers/staging/winbond/wbhal_f.h index fe25f97af724..ea9531ac8474 100644 --- a/drivers/staging/winbond/wbhal_f.h +++ b/drivers/staging/winbond/wbhal_f.h @@ -16,23 +16,23 @@ //==================================================================================== // Function declaration //==================================================================================== -void hal_remove_mapping_key( phw_data_t pHwData, PUCHAR pmac_addr ); +void hal_remove_mapping_key( phw_data_t pHwData, u8 *pmac_addr ); void hal_remove_default_key( phw_data_t pHwData, u32 index ); -unsigned char hal_set_mapping_key( phw_data_t Adapter, PUCHAR pmac_addr, u8 null_key, u8 wep_on, PUCHAR ptx_tsc, PUCHAR prx_tsc, u8 key_type, u8 key_len, PUCHAR pkey_data ); -unsigned char hal_set_default_key( phw_data_t Adapter, u8 index, u8 null_key, u8 wep_on, PUCHAR ptx_tsc, PUCHAR prx_tsc, u8 key_type, u8 key_len, PUCHAR pkey_data ); +unsigned char hal_set_mapping_key( phw_data_t Adapter, u8 *pmac_addr, u8 null_key, u8 wep_on, u8 *ptx_tsc, u8 *prx_tsc, u8 key_type, u8 key_len, u8 *pkey_data ); +unsigned char hal_set_default_key( phw_data_t Adapter, u8 index, u8 null_key, u8 wep_on, u8 *ptx_tsc, u8 *prx_tsc, u8 key_type, u8 key_len, u8 *pkey_data ); void hal_clear_all_default_key( phw_data_t pHwData ); void hal_clear_all_group_key( phw_data_t pHwData ); void hal_clear_all_mapping_key( phw_data_t pHwData ); void hal_clear_all_key( phw_data_t pHwData ); -void hal_get_ethernet_address( phw_data_t pHwData, PUCHAR current_address ); -void hal_set_ethernet_address( phw_data_t pHwData, PUCHAR current_address ); -void hal_get_permanent_address( phw_data_t pHwData, PUCHAR pethernet_address ); +void hal_get_ethernet_address( phw_data_t pHwData, u8 *current_address ); +void hal_set_ethernet_address( phw_data_t pHwData, u8 *current_address ); +void hal_get_permanent_address( phw_data_t pHwData, u8 *pethernet_address ); unsigned char hal_init_hardware( phw_data_t pHwData, PADAPTER Adapter ); void hal_set_power_save_mode( phw_data_t pHwData, unsigned char power_save, unsigned char wakeup, unsigned char dtim ); -void hal_get_power_save_mode( phw_data_t pHwData, PBOOLEAN pin_pwr_save ); +void hal_get_power_save_mode( phw_data_t pHwData, u8 *pin_pwr_save ); void hal_set_slot_time( phw_data_t pHwData, u8 type ); #define hal_set_atim_window( _A, _ATM ) -void hal_set_rates( phw_data_t pHwData, PUCHAR pbss_rates, u8 length, unsigned char basic_rate_set ); +void hal_set_rates( phw_data_t pHwData, u8 *pbss_rates, u8 length, unsigned char basic_rate_set ); #define hal_set_basic_rates( _A, _R, _L ) hal_set_rates( _A, _R, _L, TRUE ) #define hal_set_op_rates( _A, _R, _L ) hal_set_rates( _A, _R, _L, FALSE ) void hal_start_bss( phw_data_t pHwData, u8 mac_op_mode ); @@ -40,19 +40,19 @@ void hal_join_request( phw_data_t pHwData, u8 bss_type ); // 0:BSS STA 1:IBSS void hal_stop_sync_bss( phw_data_t pHwData ); void hal_resume_sync_bss( phw_data_t pHwData); void hal_set_aid( phw_data_t pHwData, u16 aid ); -void hal_set_bssid( phw_data_t pHwData, PUCHAR pbssid ); -void hal_get_bssid( phw_data_t pHwData, PUCHAR pbssid ); +void hal_set_bssid( phw_data_t pHwData, u8 *pbssid ); +void hal_get_bssid( phw_data_t pHwData, u8 *pbssid ); void hal_set_beacon_period( phw_data_t pHwData, u16 beacon_period ); void hal_set_listen_interval( phw_data_t pHwData, u16 listen_interval ); void hal_set_cap_info( phw_data_t pHwData, u16 capability_info ); -void hal_set_ssid( phw_data_t pHwData, PUCHAR pssid, u8 ssid_len ); +void hal_set_ssid( phw_data_t pHwData, u8 *pssid, u8 ssid_len ); void hal_set_current_channel( phw_data_t pHwData, ChanInfo channel ); void hal_set_current_channel_ex( phw_data_t pHwData, ChanInfo channel ); void hal_get_current_channel( phw_data_t pHwData, ChanInfo *channel ); void hal_set_accept_broadcast( phw_data_t pHwData, u8 enable ); void hal_set_accept_multicast( phw_data_t pHwData, u8 enable ); void hal_set_accept_beacon( phw_data_t pHwData, u8 enable ); -void hal_set_multicast_address( phw_data_t pHwData, PUCHAR address, u8 number ); +void hal_set_multicast_address( phw_data_t pHwData, u8 *address, u8 number ); u8 hal_get_accept_beacon( phw_data_t pHwData ); void hal_stop( phw_data_t pHwData ); void hal_halt( phw_data_t pHwData, void *ppa_data ); @@ -97,7 +97,7 @@ void hal_surprise_remove( phw_data_t pHwData ); void hal_rate_change( phw_data_t pHwData ); // Notify the HAL rate is changing 20060613.1 -unsigned char hal_get_dxx_reg( phw_data_t pHwData, u16 number, PULONG pValue ); +unsigned char hal_get_dxx_reg( phw_data_t pHwData, u16 number, u32 * pValue ); unsigned char hal_set_dxx_reg( phw_data_t pHwData, u16 number, u32 value ); #define hal_get_time_count( _P ) (_P->time_count/10) // return 100ms count #define hal_detect_error( _P ) (_P->WbUsb.DetectCount) @@ -116,7 +116,7 @@ unsigned char hal_idle( phw_data_t pHwData ); #define pa_stall_execution( _A ) //OS_SLEEP( 1 ) #define hw_get_cxx_reg( _A, _B, _C ) #define hw_set_cxx_reg( _A, _B, _C ) -#define hw_get_dxx_reg( _A, _B, _C ) hal_get_dxx_reg( _A, _B, (PULONG)_C ) +#define hw_get_dxx_reg( _A, _B, _C ) hal_get_dxx_reg( _A, _B, (u32 *)_C ) #define hw_set_dxx_reg( _A, _B, _C ) hal_set_dxx_reg( _A, _B, (u32)_C ) diff --git a/drivers/staging/winbond/wbhal_s.h b/drivers/staging/winbond/wbhal_s.h index 5b862ff357bd..2ee3f0fc1ad8 100644 --- a/drivers/staging/winbond/wbhal_s.h +++ b/drivers/staging/winbond/wbhal_s.h @@ -461,7 +461,7 @@ typedef struct _HW_DATA_T //===================================================================== // Definition for 802.11 //===================================================================== - PUCHAR bssid_pointer; // Used by hal_get_bssid for return value + u8 *bssid_pointer; // Used by hal_get_bssid for return value u8 bssid[8];// Only 6 byte will be used. 8 byte is required for read buffer u8 ssid[32];// maximum ssid length is 32 byte @@ -486,7 +486,7 @@ typedef struct _HW_DATA_T u32 CurrentRadioSw; // 20060320.2 0:On 1:Off u32 CurrentRadioHw; // 20060825 0:On 1:Off - PUCHAR power_save_point; // Used by hal_get_power_save_mode for return value + u8 *power_save_point; // Used by hal_get_power_save_mode for return value u8 cwmin; u8 desired_power_save; u8 dtim;// Is running dtim diff --git a/drivers/staging/winbond/wblinux.c b/drivers/staging/winbond/wblinux.c index 2eade5a47b19..4ed45e488318 100644 --- a/drivers/staging/winbond/wblinux.c +++ b/drivers/staging/winbond/wblinux.c @@ -25,11 +25,11 @@ EncapAtomicInc(PADAPTER Adapter, void* pAtomic) { PWBLINUX pWbLinux = &Adapter->WbLinux; u32 ltmp; - PULONG pltmp = (PULONG)pAtomic; - OS_SPIN_LOCK_ACQUIRED( &pWbLinux->AtomicSpinLock ); + u32 * pltmp = (u32 *)pAtomic; + spin_lock_irq( &pWbLinux->AtomicSpinLock ); (*pltmp)++; ltmp = (*pltmp); - OS_SPIN_LOCK_RELEASED( &pWbLinux->AtomicSpinLock ); + spin_unlock_irq( &pWbLinux->AtomicSpinLock ); return ltmp; } @@ -38,11 +38,11 @@ EncapAtomicDec(PADAPTER Adapter, void* pAtomic) { PWBLINUX pWbLinux = &Adapter->WbLinux; u32 ltmp; - PULONG pltmp = (PULONG)pAtomic; - OS_SPIN_LOCK_ACQUIRED( &pWbLinux->AtomicSpinLock ); + u32 * pltmp = (u32 *)pAtomic; + spin_lock_irq( &pWbLinux->AtomicSpinLock ); (*pltmp)--; ltmp = (*pltmp); - OS_SPIN_LOCK_RELEASED( &pWbLinux->AtomicSpinLock ); + spin_unlock_irq( &pWbLinux->AtomicSpinLock ); return ltmp; } @@ -51,8 +51,8 @@ WBLINUX_Initial(PADAPTER Adapter) { PWBLINUX pWbLinux = &Adapter->WbLinux; - OS_SPIN_LOCK_ALLOCATE( &pWbLinux->SpinLock ); - OS_SPIN_LOCK_ALLOCATE( &pWbLinux->AtomicSpinLock ); + spin_lock_init( &pWbLinux->SpinLock ); + spin_lock_init( &pWbLinux->AtomicSpinLock ); return TRUE; } @@ -79,7 +79,6 @@ void WBLINUX_Destroy(PADAPTER Adapter) { WBLINUX_stop( Adapter ); - OS_SPIN_LOCK_FREE( &pWbNdis->SpinLock ); #ifdef _PE_USB_INI_DUMP_ WBDEBUG(("[w35und] unregister_netdev!\n")); #endif @@ -142,119 +141,118 @@ unsigned char WbWLanInitialize(PADAPTER Adapter) { phw_data_t pHwData; - PUCHAR pMacAddr, pMacAddr2; + u8 *pMacAddr; + u8 *pMacAddr2; u32 InitStep = 0; u8 EEPROM_region; u8 HwRadioOff; - do { - // - // Setting default value for Linux - // - Adapter->sLocalPara.region_INF = REGION_AUTO; - Adapter->sLocalPara.TxRateMode = RATE_AUTO; - psLOCAL->bMacOperationMode = MODE_802_11_BG; // B/G mode - Adapter->Mds.TxRTSThreshold = DEFAULT_RTSThreshold; - Adapter->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD; - hal_set_phy_type( &Adapter->sHwData, RF_WB_242_1 ); - Adapter->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE; - psLOCAL->bPreambleMode = AUTO_MODE; - Adapter->sLocalPara.RadioOffStatus.boSwRadioOff = FALSE; - pHwData = &Adapter->sHwData; - hal_set_phy_type( pHwData, RF_DECIDE_BY_INF ); - - // - // Initial each module and variable - // - if (!WBLINUX_Initial(Adapter)) { + // + // Setting default value for Linux + // + Adapter->sLocalPara.region_INF = REGION_AUTO; + Adapter->sLocalPara.TxRateMode = RATE_AUTO; + psLOCAL->bMacOperationMode = MODE_802_11_BG; // B/G mode + Adapter->Mds.TxRTSThreshold = DEFAULT_RTSThreshold; + Adapter->Mds.TxFragmentThreshold = DEFAULT_FRAGMENT_THRESHOLD; + hal_set_phy_type( &Adapter->sHwData, RF_WB_242_1 ); + Adapter->sLocalPara.MTUsize = MAX_ETHERNET_PACKET_SIZE; + psLOCAL->bPreambleMode = AUTO_MODE; + Adapter->sLocalPara.RadioOffStatus.boSwRadioOff = FALSE; + pHwData = &Adapter->sHwData; + hal_set_phy_type( pHwData, RF_DECIDE_BY_INF ); + + // + // Initial each module and variable + // + if (!WBLINUX_Initial(Adapter)) { #ifdef _PE_USB_INI_DUMP_ - WBDEBUG(("[w35und]WBNDIS initialization failed\n")); + WBDEBUG(("[w35und]WBNDIS initialization failed\n")); #endif - break; - } + goto error; + } - // Initial Software variable - Adapter->sLocalPara.ShutDowned = FALSE; - - //added by ws for wep key error detection - Adapter->sLocalPara.bWepKeyError= FALSE; - Adapter->sLocalPara.bToSelfPacketReceived = FALSE; - Adapter->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds - - // Initial USB hal - InitStep = 1; - pHwData = &Adapter->sHwData; - if (!hal_init_hardware(pHwData, Adapter)) - break; - - EEPROM_region = hal_get_region_from_EEPROM( pHwData ); - if (EEPROM_region != REGION_AUTO) - psLOCAL->region = EEPROM_region; - else { - if (psLOCAL->region_INF != REGION_AUTO) - psLOCAL->region = psLOCAL->region_INF; - else - psLOCAL->region = REGION_USA; //default setting - } + // Initial Software variable + Adapter->sLocalPara.ShutDowned = FALSE; + + //added by ws for wep key error detection + Adapter->sLocalPara.bWepKeyError= FALSE; + Adapter->sLocalPara.bToSelfPacketReceived = FALSE; + Adapter->sLocalPara.WepKeyDetectTimerCount= 2 * 100; /// 2 seconds + + // Initial USB hal + InitStep = 1; + pHwData = &Adapter->sHwData; + if (!hal_init_hardware(pHwData, Adapter)) + goto error; + + EEPROM_region = hal_get_region_from_EEPROM( pHwData ); + if (EEPROM_region != REGION_AUTO) + psLOCAL->region = EEPROM_region; + else { + if (psLOCAL->region_INF != REGION_AUTO) + psLOCAL->region = psLOCAL->region_INF; + else + psLOCAL->region = REGION_USA; //default setting + } - // Get Software setting flag from hal - Adapter->sLocalPara.boAntennaDiversity = FALSE; - if (hal_software_set(pHwData) & 0x00000001) - Adapter->sLocalPara.boAntennaDiversity = TRUE; - - // - // For TS module - // - InitStep = 2; - - // For MDS module - InitStep = 3; - Mds_initial(Adapter); - - //======================================= - // Initialize the SME, SCAN, MLME, ROAM - //======================================= - InitStep = 4; - InitStep = 5; - InitStep = 6; - - // If no user-defined address in the registry, use the addresss "burned" on the NIC instead. - pMacAddr = Adapter->sLocalPara.ThisMacAddress; - pMacAddr2 = Adapter->sLocalPara.PermanentAddress; - hal_get_permanent_address( pHwData, Adapter->sLocalPara.PermanentAddress );// Reading ethernet address from EEPROM - if (OS_MEMORY_COMPARE(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH )) // Is equal - { - memcpy( pMacAddr, pMacAddr2, MAC_ADDR_LENGTH ); - } else { - // Set the user define MAC address - hal_set_ethernet_address( pHwData, Adapter->sLocalPara.ThisMacAddress ); - } + // Get Software setting flag from hal + Adapter->sLocalPara.boAntennaDiversity = FALSE; + if (hal_software_set(pHwData) & 0x00000001) + Adapter->sLocalPara.boAntennaDiversity = TRUE; + + // + // For TS module + // + InitStep = 2; + + // For MDS module + InitStep = 3; + Mds_initial(Adapter); + + //======================================= + // Initialize the SME, SCAN, MLME, ROAM + //======================================= + InitStep = 4; + InitStep = 5; + InitStep = 6; + + // If no user-defined address in the registry, use the addresss "burned" on the NIC instead. + pMacAddr = Adapter->sLocalPara.ThisMacAddress; + pMacAddr2 = Adapter->sLocalPara.PermanentAddress; + hal_get_permanent_address( pHwData, Adapter->sLocalPara.PermanentAddress );// Reading ethernet address from EEPROM + if (OS_MEMORY_COMPARE(pMacAddr, "\x00\x00\x00\x00\x00\x00", MAC_ADDR_LENGTH )) // Is equal + { + memcpy( pMacAddr, pMacAddr2, MAC_ADDR_LENGTH ); + } else { + // Set the user define MAC address + hal_set_ethernet_address( pHwData, Adapter->sLocalPara.ThisMacAddress ); + } - //get current antenna - psLOCAL->bAntennaNo = hal_get_antenna_number(pHwData); + //get current antenna + psLOCAL->bAntennaNo = hal_get_antenna_number(pHwData); #ifdef _PE_STATE_DUMP_ - WBDEBUG(("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo)); + WBDEBUG(("Driver init, antenna no = %d\n", psLOCAL->bAntennaNo)); #endif - hal_get_hw_radio_off( pHwData ); + hal_get_hw_radio_off( pHwData ); - // Waiting for HAL setting OK - while (!hal_idle(pHwData)) - OS_SLEEP(10000); + // Waiting for HAL setting OK + while (!hal_idle(pHwData)) + OS_SLEEP(10000); - MTO_Init(Adapter); + MTO_Init(Adapter); - HwRadioOff = hal_get_hw_radio_off( pHwData ); - psLOCAL->RadioOffStatus.boHwRadioOff = !!HwRadioOff; + HwRadioOff = hal_get_hw_radio_off( pHwData ); + psLOCAL->RadioOffStatus.boHwRadioOff = !!HwRadioOff; - hal_set_radio_mode( pHwData, (unsigned char)(psLOCAL->RadioOffStatus.boSwRadioOff || psLOCAL->RadioOffStatus.boHwRadioOff) ); + hal_set_radio_mode( pHwData, (unsigned char)(psLOCAL->RadioOffStatus.boSwRadioOff || psLOCAL->RadioOffStatus.boHwRadioOff) ); - hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now. - //set a tx power for reference..... -// sme_set_tx_power_level(Adapter, 12); FIXME? - return TRUE; - } - while(FALSE); + hal_driver_init_OK(pHwData) = 1; // Notify hal that the driver is ready now. + //set a tx power for reference..... +// sme_set_tx_power_level(Adapter, 12); FIXME? + return TRUE; +error: switch (InitStep) { case 5: case 4: diff --git a/drivers/staging/winbond/wblinux_s.h b/drivers/staging/winbond/wblinux_s.h index 97e9167ab839..fd2bb43bf3cf 100644 --- a/drivers/staging/winbond/wblinux_s.h +++ b/drivers/staging/winbond/wblinux_s.h @@ -24,8 +24,8 @@ typedef struct _WBLINUX { - OS_SPIN_LOCK AtomicSpinLock; - OS_SPIN_LOCK SpinLock; + spinlock_t AtomicSpinLock; + spinlock_t SpinLock; u32 shutdown; OS_ATOMIC ThreadCount; diff --git a/drivers/staging/wlan-ng/Kconfig b/drivers/staging/wlan-ng/Kconfig index 10b1f0f634d3..2425d860dcaf 100644 --- a/drivers/staging/wlan-ng/Kconfig +++ b/drivers/staging/wlan-ng/Kconfig @@ -1,6 +1,6 @@ config PRISM2_USB tristate "Prism2.5 USB driver" - depends on USB + depends on WLAN_80211 && USB default n ---help--- This is the wlan-ng prism 2.5 USB driver for a wide range of diff --git a/drivers/staging/wlan-ng/hfa384x.h b/drivers/staging/wlan-ng/hfa384x.h index a2054639d24b..0dfb8ce9aae7 100644 --- a/drivers/staging/wlan-ng/hfa384x.h +++ b/drivers/staging/wlan-ng/hfa384x.h @@ -824,7 +824,7 @@ PD Record codes #define HFA384x_CMD_MACPORT_SET(value) ((UINT16)HFA384x_CMD_AINFO_SET(value)) #define HFA384x_CMD_ISRECL(value) ((UINT16)(HFA384x_CMD_AINFO_GET((UINT16)(value) & HFA384x_CMD_RECL))) #define HFA384x_CMD_RECL_SET(value) ((UINT16)HFA384x_CMD_AINFO_SET(value)) -#define HFA384x_CMD_QOS_GET(value) ((UINT16((((UINT16)(value))&((UINT16)0x3000)) >> 12)) +#define HFA384x_CMD_QOS_GET(value) ((UINT16)((((UINT16)(value))&((UINT16)0x3000)) >> 12)) #define HFA384x_CMD_QOS_SET(value) ((UINT16)((((UINT16)(value)) << 12) & 0x3000)) #define HFA384x_CMD_ISWRITE(value) ((UINT16)(HFA384x_CMD_AINFO_GET((UINT16)(value) & HFA384x_CMD_WRITE))) #define HFA384x_CMD_WRITE_SET(value) ((UINT16)HFA384x_CMD_AINFO_SET((UINT16)value)) diff --git a/drivers/staging/wlan-ng/p80211wep.c b/drivers/staging/wlan-ng/p80211wep.c index 53fe2985971f..11a50c7fbfc8 100644 --- a/drivers/staging/wlan-ng/p80211wep.c +++ b/drivers/staging/wlan-ng/p80211wep.c @@ -64,7 +64,6 @@ /*================================================================*/ /* Project Includes */ -#include "version.h" #include "p80211hdr.h" #include "p80211types.h" #include "p80211msg.h" diff --git a/drivers/staging/wlan-ng/prism2mib.c b/drivers/staging/wlan-ng/prism2mib.c index 268fd9bba1ef..eac06f793d81 100644 --- a/drivers/staging/wlan-ng/prism2mib.c +++ b/drivers/staging/wlan-ng/prism2mib.c @@ -90,8 +90,6 @@ #include <linux/usb.h> //#endif -#include "wlan_compat.h" - /*================================================================*/ /* Project Includes */ diff --git a/drivers/staging/wlan-ng/wlan_compat.h b/drivers/staging/wlan-ng/wlan_compat.h index 17026570708f..59dfa8f84cbe 100644 --- a/drivers/staging/wlan-ng/wlan_compat.h +++ b/drivers/staging/wlan-ng/wlan_compat.h @@ -245,11 +245,11 @@ typedef int64_t INT64; # define preempt_count() (0UL) #endif -#define WLAN_LOG_ERROR(x,args...) printk(KERN_ERR "%s: " x , __FUNCTION__ , ##args); +#define WLAN_LOG_ERROR(x,args...) printk(KERN_ERR "%s: " x , __func__ , ##args); -#define WLAN_LOG_WARNING(x,args...) printk(KERN_WARNING "%s: " x , __FUNCTION__ , ##args); +#define WLAN_LOG_WARNING(x,args...) printk(KERN_WARNING "%s: " x , __func__ , ##args); -#define WLAN_LOG_NOTICE(x,args...) printk(KERN_NOTICE "%s: " x , __FUNCTION__ , ##args); +#define WLAN_LOG_NOTICE(x,args...) printk(KERN_NOTICE "%s: " x , __func__ , ##args); #define WLAN_LOG_INFO(args... ) printk(KERN_INFO args) @@ -265,7 +265,7 @@ typedef int64_t INT64; #define DBFENTER { if ( WLAN_DBVAR >= 5 ){ WLAN_LOG_DEBUG(3,"---->\n"); } } #define DBFEXIT { if ( WLAN_DBVAR >= 5 ){ WLAN_LOG_DEBUG(3,"<----\n"); } } - #define WLAN_LOG_DEBUG(l,x,args...) if ( WLAN_DBVAR >= (l)) printk(KERN_DEBUG "%s(%lu): " x , __FUNCTION__, (preempt_count() & PREEMPT_MASK), ##args ); + #define WLAN_LOG_DEBUG(l,x,args...) if ( WLAN_DBVAR >= (l)) printk(KERN_DEBUG "%s(%lu): " x , __func__, (preempt_count() & PREEMPT_MASK), ##args ); #else #define WLAN_ASSERT(c) #define WLAN_HEX_DUMP( l, s, p, n) diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index bcefbddeba50..289d81adfb9c 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -36,7 +36,8 @@ config USB_ARCH_HAS_OHCI default y if PXA3xx default y if ARCH_EP93XX default y if ARCH_AT91 - default y if ARCH_PNX4008 + default y if ARCH_PNX4008 && I2C + default y if MFD_TC6393XB # PPC: default y if STB03xxx default y if PPC_MPC52xx @@ -97,6 +98,8 @@ source "drivers/usb/core/Kconfig" source "drivers/usb/mon/Kconfig" +source "drivers/usb/wusbcore/Kconfig" + source "drivers/usb/host/Kconfig" source "drivers/usb/musb/Kconfig" diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index a419c42e880e..8b7c419b876e 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -16,9 +16,12 @@ obj-$(CONFIG_USB_UHCI_HCD) += host/ obj-$(CONFIG_USB_SL811_HCD) += host/ obj-$(CONFIG_USB_U132_HCD) += host/ obj-$(CONFIG_USB_R8A66597_HCD) += host/ +obj-$(CONFIG_USB_HWA_HCD) += host/ obj-$(CONFIG_USB_C67X00_HCD) += c67x00/ +obj-$(CONFIG_USB_WUSB) += wusbcore/ + obj-$(CONFIG_USB_ACM) += class/ obj-$(CONFIG_USB_PRINTER) += class/ diff --git a/drivers/usb/atm/speedtch.c b/drivers/usb/atm/speedtch.c index 76fce44c2f9a..3e862401a638 100644 --- a/drivers/usb/atm/speedtch.c +++ b/drivers/usb/atm/speedtch.c @@ -722,6 +722,16 @@ static void speedtch_atm_stop(struct usbatm_data *usbatm, struct atm_dev *atm_de flush_scheduled_work(); } +static int speedtch_pre_reset(struct usb_interface *intf) +{ + return 0; +} + +static int speedtch_post_reset(struct usb_interface *intf) +{ + return 0; +} + /********** ** USB ** @@ -740,6 +750,8 @@ static struct usb_driver speedtch_usb_driver = { .name = speedtch_driver_name, .probe = speedtch_usb_probe, .disconnect = usbatm_usb_disconnect, + .pre_reset = speedtch_pre_reset, + .post_reset = speedtch_post_reset, .id_table = speedtch_usb_ids }; diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index fab23ee8702b..20104443081a 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -849,9 +849,10 @@ static void acm_write_buffers_free(struct acm *acm) { int i; struct acm_wb *wb; + struct usb_device *usb_dev = interface_to_usbdev(acm->control); for (wb = &acm->wb[0], i = 0; i < ACM_NW; i++, wb++) { - usb_buffer_free(acm->dev, acm->writesize, wb->buf, wb->dmah); + usb_buffer_free(usb_dev, acm->writesize, wb->buf, wb->dmah); } } diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 7429f70b9d06..5a8ecc045e3f 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -42,6 +42,8 @@ static struct usb_device_id wdm_ids[] = { { } }; +MODULE_DEVICE_TABLE (usb, wdm_ids); + #define WDM_MINOR_BASE 176 diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index e935be7eb468..3d7793d93031 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -1610,7 +1610,8 @@ int usb_external_resume_device(struct usb_device *udev) status = usb_resume_both(udev); udev->last_busy = jiffies; usb_pm_unlock(udev); - do_unbind_rebind(udev, DO_REBIND); + if (status == 0) + do_unbind_rebind(udev, DO_REBIND); /* Now that the device is awake, we can start trying to autosuspend * it again. */ diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index d73ce262c365..9b3f16bd12cb 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3504,7 +3504,7 @@ int usb_reset_device(struct usb_device *udev) USB_INTERFACE_BOUND) rebind = 1; } - if (rebind) + if (ret == 0 && rebind) usb_rebind_intf(cintf); } } diff --git a/drivers/usb/gadget/config.c b/drivers/usb/gadget/config.c index 1ca1c326392a..e1191b9a316a 100644 --- a/drivers/usb/gadget/config.c +++ b/drivers/usb/gadget/config.c @@ -168,7 +168,7 @@ usb_copy_descriptors(struct usb_descriptor_header **src) * usb_find_endpoint - find a copy of an endpoint descriptor * @src: original vector of descriptors * @copy: copy of @src - * @ep: endpoint descriptor found in @src + * @match: endpoint descriptor found in @src * * This returns the copy of the @match descriptor made for @copy. Its * intended use is to help remembering the endpoint descriptor to use diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index bcf375ca3d72..caa37c95802c 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -650,7 +650,7 @@ pxa_ep_alloc_request(struct usb_ep *_ep, gfp_t gfp_flags) struct pxa27x_request *req; req = kzalloc(sizeof *req, gfp_flags); - if (!req || !_ep) + if (!req) return NULL; INIT_LIST_HEAD(&req->queue); diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 48f51b12d2e2..00ba06b44752 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -1894,11 +1894,8 @@ static int s3c2410_udc_probe(struct platform_device *pdev) udc->regs_info = debugfs_create_file("registers", S_IRUGO, s3c2410_udc_debugfs_root, udc, &s3c2410_udc_debugfs_fops); - if (IS_ERR(udc->regs_info)) { - dev_warn(dev, "debugfs file creation failed %ld\n", - PTR_ERR(udc->regs_info)); - udc->regs_info = NULL; - } + if (!udc->regs_info) + dev_warn(dev, "debugfs file creation failed\n"); } dev_dbg(dev, "probe ok\n"); diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 228797e54f9c..56f592dc0b36 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -138,7 +138,6 @@ config USB_OHCI_HCD tristate "OHCI HCD support" depends on USB && USB_ARCH_HAS_OHCI select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 - select I2C if ARCH_PNX4008 ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing USB 1.1 host controller hardware. It does more in hardware than Intel's @@ -305,3 +304,31 @@ config SUPERH_ON_CHIP_R8A66597 help This driver enables support for the on-chip R8A66597 in the SH7366 and SH7723 processors. + +config USB_WHCI_HCD + tristate "Wireless USB Host Controller Interface (WHCI) driver (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on PCI && USB + select USB_WUSB + select UWB_WHCI + help + A driver for PCI-based Wireless USB Host Controllers that are + compliant with the WHCI specification. + + To compile this driver a module, choose M here: the module + will be called "whci-hcd". + +config USB_HWA_HCD + tristate "Host Wire Adapter (HWA) driver (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on USB + select USB_WUSB + select UWB_HWA + help + This driver enables you to connect Wireless USB devices to + your system using a Host Wire Adaptor USB dongle. This is an + UWB Radio Controller and WUSB Host Controller connected to + your machine via USB (specified in WUSB1.0). + + To compile this driver a module, choose M here: the module + will be called "hwa-hc". diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index f1edda2dcfde..23be22224044 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -8,6 +8,8 @@ endif isp1760-objs := isp1760-hcd.o isp1760-if.o +obj-$(CONFIG_USB_WHCI_HCD) += whci/ + obj-$(CONFIG_PCI) += pci-quirks.o obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o @@ -19,3 +21,4 @@ obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o obj-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o +obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c new file mode 100644 index 000000000000..64be4d88df11 --- /dev/null +++ b/drivers/usb/host/hwa-hc.c @@ -0,0 +1,925 @@ +/* + * Host Wire Adapter: + * Driver glue, HWA-specific functions, bridges to WAHC and WUSBHC + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * The HWA driver is a simple layer that forwards requests to the WAHC + * (Wire Adater Host Controller) or WUSBHC (Wireless USB Host + * Controller) layers. + * + * Host Wire Adapter is the 'WUSB 1.0 standard' name for Wireless-USB + * Host Controller that is connected to your system via USB (a USB + * dongle that implements a USB host...). There is also a Device Wired + * Adaptor, DWA (Wireless USB hub) that uses the same mechanism for + * transferring data (it is after all a USB host connected via + * Wireless USB), we have a common layer called Wire Adapter Host + * Controller that does all the hard work. The WUSBHC (Wireless USB + * Host Controller) is the part common to WUSB Host Controllers, the + * HWA and the PCI-based one, that is implemented following the WHCI + * spec. All these layers are implemented in ../wusbcore. + * + * The main functions are hwahc_op_urb_{en,de}queue(), that pass the + * job of converting a URB to a Wire Adapter + * + * Entry points: + * + * hwahc_driver_*() Driver initialization, registration and + * teardown. + * + * hwahc_probe() New device came up, create an instance for + * it [from device enumeration]. + * + * hwahc_disconnect() Remove device instance [from device + * enumeration]. + * + * [__]hwahc_op_*() Host-Wire-Adaptor specific functions for + * starting/stopping/etc (some might be made also + * DWA). + */ +#include <linux/kernel.h> +#include <linux/version.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/workqueue.h> +#include <linux/wait.h> +#include <linux/completion.h> +#include "../wusbcore/wa-hc.h" +#include "../wusbcore/wusbhc.h" + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +struct hwahc { + struct wusbhc wusbhc; /* has to be 1st */ + struct wahc wa; + u8 buffer[16]; /* for misc usb transactions */ +}; + +/** + * FIXME should be wusbhc + * + * NOTE: we need to cache the Cluster ID because later...there is no + * way to get it :) + */ +static int __hwahc_set_cluster_id(struct hwahc *hwahc, u8 cluster_id) +{ + int result; + struct wusbhc *wusbhc = &hwahc->wusbhc; + struct wahc *wa = &hwahc->wa; + struct device *dev = &wa->usb_iface->dev; + + result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + WUSB_REQ_SET_CLUSTER_ID, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + cluster_id, + wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, + NULL, 0, 1000 /* FIXME: arbitrary */); + if (result < 0) + dev_err(dev, "Cannot set WUSB Cluster ID to 0x%02x: %d\n", + cluster_id, result); + else + wusbhc->cluster_id = cluster_id; + dev_info(dev, "Wireless USB Cluster ID set to 0x%02x\n", cluster_id); + return result; +} + +static int __hwahc_op_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots) +{ + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + + return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + WUSB_REQ_SET_NUM_DNTS, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + interval << 8 | slots, + wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, + NULL, 0, 1000 /* FIXME: arbitrary */); +} + +/* + * Reset a WUSB host controller and wait for it to complete doing it. + * + * @usb_hcd: Pointer to WUSB Host Controller instance. + * + */ +static int hwahc_op_reset(struct usb_hcd *usb_hcd) +{ + int result; + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct device *dev = &hwahc->wa.usb_iface->dev; + + d_fnstart(4, dev, "(hwahc %p)\n", hwahc); + mutex_lock(&wusbhc->mutex); + wa_nep_disarm(&hwahc->wa); + result = __wa_set_feature(&hwahc->wa, WA_RESET); + if (result < 0) { + dev_err(dev, "error commanding HC to reset: %d\n", result); + goto error_unlock; + } + d_printf(3, dev, "reset: waiting for device to change state\n"); + result = __wa_wait_status(&hwahc->wa, WA_STATUS_RESETTING, 0); + if (result < 0) { + dev_err(dev, "error waiting for HC to reset: %d\n", result); + goto error_unlock; + } +error_unlock: + mutex_unlock(&wusbhc->mutex); + d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result); + return result; +} + +/* + * FIXME: break this function up + */ +static int hwahc_op_start(struct usb_hcd *usb_hcd) +{ + u8 addr; + int result; + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct device *dev = &hwahc->wa.usb_iface->dev; + + /* Set up a Host Info WUSB Information Element */ + d_fnstart(4, dev, "(hwahc %p)\n", hwahc); + result = -ENOSPC; + mutex_lock(&wusbhc->mutex); + /* Start the numbering from the top so that the bottom + * range of the unauth addr space is used for devices, + * the top for HCs; use 0xfe - RC# */ + addr = wusb_cluster_id_get(); + if (addr == 0) + goto error_cluster_id_get; + result = __hwahc_set_cluster_id(hwahc, addr); + if (result < 0) + goto error_set_cluster_id; + + result = wa_nep_arm(&hwahc->wa, GFP_KERNEL); + if (result < 0) { + dev_err(dev, "cannot listen to notifications: %d\n", result); + goto error_stop; + } + usb_hcd->uses_new_polling = 1; + usb_hcd->poll_rh = 1; + usb_hcd->state = HC_STATE_RUNNING; + result = 0; +out: + mutex_unlock(&wusbhc->mutex); + d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result); + return result; + +error_stop: + __wa_stop(&hwahc->wa); +error_set_cluster_id: + wusb_cluster_id_put(wusbhc->cluster_id); +error_cluster_id_get: + goto out; + +} + +/* + * FIXME: break this function up + */ +static int __hwahc_op_wusbhc_start(struct wusbhc *wusbhc) +{ + int result; + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct device *dev = &hwahc->wa.usb_iface->dev; + + /* Set up a Host Info WUSB Information Element */ + d_fnstart(4, dev, "(hwahc %p)\n", hwahc); + result = -ENOSPC; + + result = __wa_set_feature(&hwahc->wa, WA_ENABLE); + if (result < 0) { + dev_err(dev, "error commanding HC to start: %d\n", result); + goto error_stop; + } + result = __wa_wait_status(&hwahc->wa, WA_ENABLE, WA_ENABLE); + if (result < 0) { + dev_err(dev, "error waiting for HC to start: %d\n", result); + goto error_stop; + } + result = 0; +out: + d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result); + return result; + +error_stop: + result = __wa_clear_feature(&hwahc->wa, WA_ENABLE); + goto out; +} + +static int hwahc_op_suspend(struct usb_hcd *usb_hcd, pm_message_t msg) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + dev_err(wusbhc->dev, "%s (%p [%p], 0x%lx) UNIMPLEMENTED\n", __func__, + usb_hcd, hwahc, *(unsigned long *) &msg); + return -ENOSYS; +} + +static int hwahc_op_resume(struct usb_hcd *usb_hcd) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + + dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__, + usb_hcd, hwahc); + return -ENOSYS; +} + +static void __hwahc_op_wusbhc_stop(struct wusbhc *wusbhc) +{ + int result; + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct device *dev = &hwahc->wa.usb_iface->dev; + + d_fnstart(4, dev, "(hwahc %p)\n", hwahc); + /* Nothing for now */ + d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result); + return; +} + +/* + * No need to abort pipes, as when this is called, all the children + * has been disconnected and that has done it [through + * usb_disable_interface() -> usb_disable_endpoint() -> + * hwahc_op_ep_disable() - >rpipe_ep_disable()]. + */ +static void hwahc_op_stop(struct usb_hcd *usb_hcd) +{ + int result; + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + struct device *dev = &wa->usb_iface->dev; + + d_fnstart(4, dev, "(hwahc %p)\n", hwahc); + mutex_lock(&wusbhc->mutex); + wusbhc_stop(wusbhc); + wa_nep_disarm(&hwahc->wa); + result = __wa_stop(&hwahc->wa); + wusb_cluster_id_put(wusbhc->cluster_id); + mutex_unlock(&wusbhc->mutex); + d_fnend(4, dev, "(hwahc %p) = %d\n", hwahc, result); + return; +} + +static int hwahc_op_get_frame_number(struct usb_hcd *usb_hcd) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + + dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__, + usb_hcd, hwahc); + return -ENOSYS; +} + +static int hwahc_op_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb, + gfp_t gfp) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + + return wa_urb_enqueue(&hwahc->wa, urb->ep, urb, gfp); +} + +static int hwahc_op_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb, + int status) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + + return wa_urb_dequeue(&hwahc->wa, urb); +} + +/* + * Release resources allocated for an endpoint + * + * If there is an associated rpipe to this endpoint, go ahead and put it. + */ +static void hwahc_op_endpoint_disable(struct usb_hcd *usb_hcd, + struct usb_host_endpoint *ep) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + + rpipe_ep_disable(&hwahc->wa, ep); +} + +/* + * Set the UWB MAS allocation for the WUSB cluster + * + * @stream_index: stream to use (-1 for cancelling the allocation) + * @mas: mas bitmap to use + */ +static int __hwahc_op_bwa_set(struct wusbhc *wusbhc, s8 stream_index, + const struct uwb_mas_bm *mas) +{ + int result; + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + struct device *dev = &wa->usb_iface->dev; + u8 mas_le[UWB_NUM_MAS/8]; + + /* Set the stream index */ + result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + WUSB_REQ_SET_STREAM_IDX, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + stream_index, + wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, + NULL, 0, 1000 /* FIXME: arbitrary */); + if (result < 0) { + dev_err(dev, "Cannot set WUSB stream index: %d\n", result); + goto out; + } + uwb_mas_bm_copy_le(mas_le, mas); + /* Set the MAS allocation */ + result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + WUSB_REQ_SET_WUSB_MAS, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, + mas_le, 32, 1000 /* FIXME: arbitrary */); + if (result < 0) + dev_err(dev, "Cannot set WUSB MAS allocation: %d\n", result); +out: + return result; +} + +/* + * Add an IE to the host's MMC + * + * @interval: See WUSB1.0[8.5.3.1] + * @repeat_cnt: See WUSB1.0[8.5.3.1] + * @handle: See WUSB1.0[8.5.3.1] + * @wuie: Pointer to the header of the WUSB IE data to add. + * MUST BE allocated in a kmalloc buffer (no stack or + * vmalloc). + * + * NOTE: the format of the WUSB IEs for MMCs are different to the + * normal MBOA MAC IEs (IE Id + Length in MBOA MAC vs. Length + + * Id in WUSB IEs). Standards...you gotta love'em. + */ +static int __hwahc_op_mmcie_add(struct wusbhc *wusbhc, u8 interval, + u8 repeat_cnt, u8 handle, + struct wuie_hdr *wuie) +{ + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; + + return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + WUSB_REQ_ADD_MMC_IE, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + interval << 8 | repeat_cnt, + handle << 8 | iface_no, + wuie, wuie->bLength, 1000 /* FIXME: arbitrary */); +} + +/* + * Remove an IE to the host's MMC + * + * @handle: See WUSB1.0[8.5.3.1] + */ +static int __hwahc_op_mmcie_rm(struct wusbhc *wusbhc, u8 handle) +{ + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; + return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + WUSB_REQ_REMOVE_MMC_IE, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, handle << 8 | iface_no, + NULL, 0, 1000 /* FIXME: arbitrary */); +} + +/* + * Update device information for a given fake port + * + * @port_idx: Fake port to which device is connected (wusbhc index, not + * USB port number). + */ +static int __hwahc_op_dev_info_set(struct wusbhc *wusbhc, + struct wusb_dev *wusb_dev) +{ + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; + struct hwa_dev_info *dev_info; + int ret; + + /* fill out the Device Info buffer and send it */ + dev_info = kzalloc(sizeof(struct hwa_dev_info), GFP_KERNEL); + if (!dev_info) + return -ENOMEM; + uwb_mas_bm_copy_le(dev_info->bmDeviceAvailability, + &wusb_dev->availability); + dev_info->bDeviceAddress = wusb_dev->addr; + + /* + * If the descriptors haven't been read yet, use a default PHY + * rate of 53.3 Mbit/s only. The correct value will be used + * when this will be called again as part of the + * authentication process (which occurs after the descriptors + * have been read). + */ + if (wusb_dev->wusb_cap_descr) + dev_info->wPHYRates = wusb_dev->wusb_cap_descr->wPHYRates; + else + dev_info->wPHYRates = cpu_to_le16(USB_WIRELESS_PHY_53); + + ret = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + WUSB_REQ_SET_DEV_INFO, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, wusb_dev->port_idx << 8 | iface_no, + dev_info, sizeof(struct hwa_dev_info), + 1000 /* FIXME: arbitrary */); + kfree(dev_info); + return ret; +} + +/* + * Set host's idea of which encryption (and key) method to use when + * talking to ad evice on a given port. + * + * If key is NULL, it means disable encryption for that "virtual port" + * (used when we disconnect). + */ +static int __hwahc_dev_set_key(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, + const void *key, size_t key_size, + u8 key_idx) +{ + int result = -ENOMEM; + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; + struct usb_key_descriptor *keyd; + size_t keyd_len; + + keyd_len = sizeof(*keyd) + key_size; + keyd = kzalloc(keyd_len, GFP_KERNEL); + if (keyd == NULL) + return -ENOMEM; + + keyd->bLength = keyd_len; + keyd->bDescriptorType = USB_DT_KEY; + keyd->tTKID[0] = (tkid >> 0) & 0xff; + keyd->tTKID[1] = (tkid >> 8) & 0xff; + keyd->tTKID[2] = (tkid >> 16) & 0xff; + memcpy(keyd->bKeyData, key, key_size); + + result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + USB_REQ_SET_DESCRIPTOR, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + USB_DT_KEY << 8 | key_idx, + port_idx << 8 | iface_no, + keyd, keyd_len, 1000 /* FIXME: arbitrary */); + + memset(keyd, 0, sizeof(*keyd)); /* clear keys etc. */ + kfree(keyd); + return result; +} + +/* + * Set host's idea of which encryption (and key) method to use when + * talking to ad evice on a given port. + * + * If key is NULL, it means disable encryption for that "virtual port" + * (used when we disconnect). + */ +static int __hwahc_op_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, + const void *key, size_t key_size) +{ + int result = -ENOMEM; + struct hwahc *hwahc = container_of(wusbhc, struct hwahc, wusbhc); + struct wahc *wa = &hwahc->wa; + u8 iface_no = wa->usb_iface->cur_altsetting->desc.bInterfaceNumber; + u8 encryption_value; + + /* Tell the host which key to use to talk to the device */ + if (key) { + u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_PTK, + WUSB_KEY_INDEX_ORIGINATOR_HOST); + + result = __hwahc_dev_set_key(wusbhc, port_idx, tkid, + key, key_size, key_idx); + if (result < 0) + goto error_set_key; + encryption_value = wusbhc->ccm1_etd->bEncryptionValue; + } else { + /* FIXME: this should come from wusbhc->etd[UNSECURE].value */ + encryption_value = 0; + } + + /* Set the encryption type for commmunicating with the device */ + result = usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + USB_REQ_SET_ENCRYPTION, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + encryption_value, port_idx << 8 | iface_no, + NULL, 0, 1000 /* FIXME: arbitrary */); + if (result < 0) + dev_err(wusbhc->dev, "Can't set host's WUSB encryption for " + "port index %u to %s (value %d): %d\n", port_idx, + wusb_et_name(wusbhc->ccm1_etd->bEncryptionType), + wusbhc->ccm1_etd->bEncryptionValue, result); +error_set_key: + return result; +} + +/* + * Set host's GTK key + */ +static int __hwahc_op_set_gtk(struct wusbhc *wusbhc, u32 tkid, + const void *key, size_t key_size) +{ + u8 key_idx = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_GTK, + WUSB_KEY_INDEX_ORIGINATOR_HOST); + + return __hwahc_dev_set_key(wusbhc, 0, tkid, key, key_size, key_idx); +} + +/* + * Get the Wire Adapter class-specific descriptor + * + * NOTE: this descriptor comes with the big bundled configuration + * descriptor that includes the interfaces' and endpoints', so + * we just look for it in the cached copy kept by the USB stack. + * + * NOTE2: We convert LE fields to CPU order. + */ +static int wa_fill_descr(struct wahc *wa) +{ + int result; + struct device *dev = &wa->usb_iface->dev; + char *itr; + struct usb_device *usb_dev = wa->usb_dev; + struct usb_descriptor_header *hdr; + struct usb_wa_descriptor *wa_descr; + size_t itr_size, actconfig_idx; + + actconfig_idx = (usb_dev->actconfig - usb_dev->config) / + sizeof(usb_dev->config[0]); + itr = usb_dev->rawdescriptors[actconfig_idx]; + itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength); + while (itr_size >= sizeof(*hdr)) { + hdr = (struct usb_descriptor_header *) itr; + d_printf(3, dev, "Extra device descriptor: " + "type %02x/%u bytes @ %zu (%zu left)\n", + hdr->bDescriptorType, hdr->bLength, + (itr - usb_dev->rawdescriptors[actconfig_idx]), + itr_size); + if (hdr->bDescriptorType == USB_DT_WIRE_ADAPTER) + goto found; + itr += hdr->bLength; + itr_size -= hdr->bLength; + } + dev_err(dev, "cannot find Wire Adapter Class descriptor\n"); + return -ENODEV; + +found: + result = -EINVAL; + if (hdr->bLength > itr_size) { /* is it available? */ + dev_err(dev, "incomplete Wire Adapter Class descriptor " + "(%zu bytes left, %u needed)\n", + itr_size, hdr->bLength); + goto error; + } + if (hdr->bLength < sizeof(*wa->wa_descr)) { + dev_err(dev, "short Wire Adapter Class descriptor\n"); + goto error; + } + wa->wa_descr = wa_descr = (struct usb_wa_descriptor *) hdr; + /* Make LE fields CPU order */ + wa_descr->bcdWAVersion = le16_to_cpu(wa_descr->bcdWAVersion); + wa_descr->wNumRPipes = le16_to_cpu(wa_descr->wNumRPipes); + wa_descr->wRPipeMaxBlock = le16_to_cpu(wa_descr->wRPipeMaxBlock); + if (wa_descr->bcdWAVersion > 0x0100) + dev_warn(dev, "Wire Adapter v%d.%d newer than groked v1.0\n", + wa_descr->bcdWAVersion & 0xff00 >> 8, + wa_descr->bcdWAVersion & 0x00ff); + result = 0; +error: + return result; +} + +static struct hc_driver hwahc_hc_driver = { + .description = "hwa-hcd", + .product_desc = "Wireless USB HWA host controller", + .hcd_priv_size = sizeof(struct hwahc) - sizeof(struct usb_hcd), + .irq = NULL, /* FIXME */ + .flags = HCD_USB2, /* FIXME */ + .reset = hwahc_op_reset, + .start = hwahc_op_start, + .pci_suspend = hwahc_op_suspend, + .pci_resume = hwahc_op_resume, + .stop = hwahc_op_stop, + .get_frame_number = hwahc_op_get_frame_number, + .urb_enqueue = hwahc_op_urb_enqueue, + .urb_dequeue = hwahc_op_urb_dequeue, + .endpoint_disable = hwahc_op_endpoint_disable, + + .hub_status_data = wusbhc_rh_status_data, + .hub_control = wusbhc_rh_control, + .bus_suspend = wusbhc_rh_suspend, + .bus_resume = wusbhc_rh_resume, + .start_port_reset = wusbhc_rh_start_port_reset, +}; + +static int hwahc_security_create(struct hwahc *hwahc) +{ + int result; + struct wusbhc *wusbhc = &hwahc->wusbhc; + struct usb_device *usb_dev = hwahc->wa.usb_dev; + struct device *dev = &usb_dev->dev; + struct usb_security_descriptor *secd; + struct usb_encryption_descriptor *etd; + void *itr, *top; + size_t itr_size, needed, bytes; + u8 index; + char buf[64]; + + /* Find the host's security descriptors in the config descr bundle */ + index = (usb_dev->actconfig - usb_dev->config) / + sizeof(usb_dev->config[0]); + itr = usb_dev->rawdescriptors[index]; + itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength); + top = itr + itr_size; + result = __usb_get_extra_descriptor(usb_dev->rawdescriptors[index], + le16_to_cpu(usb_dev->actconfig->desc.wTotalLength), + USB_DT_SECURITY, (void **) &secd); + if (result == -1) { + dev_warn(dev, "BUG? WUSB host has no security descriptors\n"); + return 0; + } + needed = sizeof(*secd); + if (top - (void *)secd < needed) { + dev_err(dev, "BUG? Not enough data to process security " + "descriptor header (%zu bytes left vs %zu needed)\n", + top - (void *) secd, needed); + return 0; + } + needed = le16_to_cpu(secd->wTotalLength); + if (top - (void *)secd < needed) { + dev_err(dev, "BUG? Not enough data to process security " + "descriptors (%zu bytes left vs %zu needed)\n", + top - (void *) secd, needed); + return 0; + } + /* Walk over the sec descriptors and store CCM1's on wusbhc */ + itr = (void *) secd + sizeof(*secd); + top = (void *) secd + le16_to_cpu(secd->wTotalLength); + index = 0; + bytes = 0; + while (itr < top) { + etd = itr; + if (top - itr < sizeof(*etd)) { + dev_err(dev, "BUG: bad host security descriptor; " + "not enough data (%zu vs %zu left)\n", + top - itr, sizeof(*etd)); + break; + } + if (etd->bLength < sizeof(*etd)) { + dev_err(dev, "BUG: bad host encryption descriptor; " + "descriptor is too short " + "(%zu vs %zu needed)\n", + (size_t)etd->bLength, sizeof(*etd)); + break; + } + itr += etd->bLength; + bytes += snprintf(buf + bytes, sizeof(buf) - bytes, + "%s (0x%02x) ", + wusb_et_name(etd->bEncryptionType), + etd->bEncryptionValue); + wusbhc->ccm1_etd = etd; + } + dev_info(dev, "supported encryption types: %s\n", buf); + if (wusbhc->ccm1_etd == NULL) { + dev_err(dev, "E: host doesn't support CCM-1 crypto\n"); + return 0; + } + /* Pretty print what we support */ + return 0; +} + +static void hwahc_security_release(struct hwahc *hwahc) +{ + /* nothing to do here so far... */ +} + +static int hwahc_create(struct hwahc *hwahc, struct usb_interface *iface) +{ + int result; + struct device *dev = &iface->dev; + struct wusbhc *wusbhc = &hwahc->wusbhc; + struct wahc *wa = &hwahc->wa; + struct usb_device *usb_dev = interface_to_usbdev(iface); + + wa->usb_dev = usb_get_dev(usb_dev); /* bind the USB device */ + wa->usb_iface = usb_get_intf(iface); + wusbhc->dev = dev; + wusbhc->uwb_rc = uwb_rc_get_by_grandpa(iface->dev.parent); + if (wusbhc->uwb_rc == NULL) { + result = -ENODEV; + dev_err(dev, "Cannot get associated UWB Host Controller\n"); + goto error_rc_get; + } + result = wa_fill_descr(wa); /* Get the device descriptor */ + if (result < 0) + goto error_fill_descriptor; + if (wa->wa_descr->bNumPorts > USB_MAXCHILDREN) { + dev_err(dev, "FIXME: USB_MAXCHILDREN too low for WUSB " + "adapter (%u ports)\n", wa->wa_descr->bNumPorts); + wusbhc->ports_max = USB_MAXCHILDREN; + } else { + wusbhc->ports_max = wa->wa_descr->bNumPorts; + } + wusbhc->mmcies_max = wa->wa_descr->bNumMMCIEs; + wusbhc->start = __hwahc_op_wusbhc_start; + wusbhc->stop = __hwahc_op_wusbhc_stop; + wusbhc->mmcie_add = __hwahc_op_mmcie_add; + wusbhc->mmcie_rm = __hwahc_op_mmcie_rm; + wusbhc->dev_info_set = __hwahc_op_dev_info_set; + wusbhc->bwa_set = __hwahc_op_bwa_set; + wusbhc->set_num_dnts = __hwahc_op_set_num_dnts; + wusbhc->set_ptk = __hwahc_op_set_ptk; + wusbhc->set_gtk = __hwahc_op_set_gtk; + result = hwahc_security_create(hwahc); + if (result < 0) { + dev_err(dev, "Can't initialize security: %d\n", result); + goto error_security_create; + } + wa->wusb = wusbhc; /* FIXME: ugly, need to fix */ + result = wusbhc_create(&hwahc->wusbhc); + if (result < 0) { + dev_err(dev, "Can't create WUSB HC structures: %d\n", result); + goto error_wusbhc_create; + } + result = wa_create(&hwahc->wa, iface); + if (result < 0) + goto error_wa_create; + return 0; + +error_wa_create: + wusbhc_destroy(&hwahc->wusbhc); +error_wusbhc_create: + /* WA Descr fill allocs no resources */ +error_security_create: +error_fill_descriptor: + uwb_rc_put(wusbhc->uwb_rc); +error_rc_get: + usb_put_intf(iface); + usb_put_dev(usb_dev); + return result; +} + +static void hwahc_destroy(struct hwahc *hwahc) +{ + struct wusbhc *wusbhc = &hwahc->wusbhc; + + d_fnstart(1, NULL, "(hwahc %p)\n", hwahc); + mutex_lock(&wusbhc->mutex); + __wa_destroy(&hwahc->wa); + wusbhc_destroy(&hwahc->wusbhc); + hwahc_security_release(hwahc); + hwahc->wusbhc.dev = NULL; + uwb_rc_put(wusbhc->uwb_rc); + usb_put_intf(hwahc->wa.usb_iface); + usb_put_dev(hwahc->wa.usb_dev); + mutex_unlock(&wusbhc->mutex); + d_fnend(1, NULL, "(hwahc %p) = void\n", hwahc); +} + +static void hwahc_init(struct hwahc *hwahc) +{ + wa_init(&hwahc->wa); +} + +static int hwahc_probe(struct usb_interface *usb_iface, + const struct usb_device_id *id) +{ + int result; + struct usb_hcd *usb_hcd; + struct wusbhc *wusbhc; + struct hwahc *hwahc; + struct device *dev = &usb_iface->dev; + + d_fnstart(4, dev, "(%p, %p)\n", usb_iface, id); + result = -ENOMEM; + usb_hcd = usb_create_hcd(&hwahc_hc_driver, &usb_iface->dev, "wusb-hwa"); + if (usb_hcd == NULL) { + dev_err(dev, "unable to allocate instance\n"); + goto error_alloc; + } + usb_hcd->wireless = 1; + usb_hcd->flags |= HCD_FLAG_SAW_IRQ; + wusbhc = usb_hcd_to_wusbhc(usb_hcd); + hwahc = container_of(wusbhc, struct hwahc, wusbhc); + hwahc_init(hwahc); + result = hwahc_create(hwahc, usb_iface); + if (result < 0) { + dev_err(dev, "Cannot initialize internals: %d\n", result); + goto error_hwahc_create; + } + result = usb_add_hcd(usb_hcd, 0, 0); + if (result < 0) { + dev_err(dev, "Cannot add HCD: %d\n", result); + goto error_add_hcd; + } + result = wusbhc_b_create(&hwahc->wusbhc); + if (result < 0) { + dev_err(dev, "Cannot setup phase B of WUSBHC: %d\n", result); + goto error_wusbhc_b_create; + } + d_fnend(4, dev, "(%p, %p) = 0\n", usb_iface, id); + return 0; + +error_wusbhc_b_create: + usb_remove_hcd(usb_hcd); +error_add_hcd: + hwahc_destroy(hwahc); +error_hwahc_create: + usb_put_hcd(usb_hcd); +error_alloc: + d_fnend(4, dev, "(%p, %p) = %d\n", usb_iface, id, result); + return result; +} + +static void hwahc_disconnect(struct usb_interface *usb_iface) +{ + struct usb_hcd *usb_hcd; + struct wusbhc *wusbhc; + struct hwahc *hwahc; + + usb_hcd = usb_get_intfdata(usb_iface); + wusbhc = usb_hcd_to_wusbhc(usb_hcd); + hwahc = container_of(wusbhc, struct hwahc, wusbhc); + + d_fnstart(1, NULL, "(hwahc %p [usb_iface %p])\n", hwahc, usb_iface); + wusbhc_b_destroy(&hwahc->wusbhc); + usb_remove_hcd(usb_hcd); + hwahc_destroy(hwahc); + usb_put_hcd(usb_hcd); + d_fnend(1, NULL, "(hwahc %p [usb_iface %p]) = void\n", hwahc, + usb_iface); +} + +/** USB device ID's that we handle */ +static struct usb_device_id hwahc_id_table[] = { + /* FIXME: use class labels for this */ + { USB_INTERFACE_INFO(0xe0, 0x02, 0x01), }, + {}, +}; +MODULE_DEVICE_TABLE(usb, hwahc_id_table); + +static struct usb_driver hwahc_driver = { + .name = "hwa-hc", + .probe = hwahc_probe, + .disconnect = hwahc_disconnect, + .id_table = hwahc_id_table, +}; + +static int __init hwahc_driver_init(void) +{ + int result; + result = usb_register(&hwahc_driver); + if (result < 0) { + printk(KERN_ERR "WA-CDS: Cannot register USB driver: %d\n", + result); + goto error_usb_register; + } + return 0; + +error_usb_register: + return result; + +} +module_init(hwahc_driver_init); + +static void __exit hwahc_driver_exit(void) +{ + usb_deregister(&hwahc_driver); +} +module_exit(hwahc_driver_exit); + + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("Host Wired Adapter USB Host Control Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 8647dab0d7f9..8aa3f4556a32 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1075,12 +1075,18 @@ MODULE_LICENSE ("GPL"); #define SM501_OHCI_DRIVER ohci_hcd_sm501_driver #endif +#ifdef CONFIG_MFD_TC6393XB +#include "ohci-tmio.c" +#define TMIO_OHCI_DRIVER ohci_hcd_tmio_driver +#endif + #if !defined(PCI_DRIVER) && \ !defined(PLATFORM_DRIVER) && \ !defined(OF_PLATFORM_DRIVER) && \ !defined(SA1111_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && \ !defined(SM501_OHCI_DRIVER) && \ + !defined(TMIO_OHCI_DRIVER) && \ !defined(SSB_OHCI_DRIVER) #error "missing bus glue for ohci-hcd" #endif @@ -1147,13 +1153,25 @@ static int __init ohci_hcd_mod_init(void) goto error_sm501; #endif +#ifdef TMIO_OHCI_DRIVER + retval = platform_driver_register(&TMIO_OHCI_DRIVER); + if (retval < 0) + goto error_tmio; +#endif + return retval; /* Error path */ +#ifdef TMIO_OHCI_DRIVER + platform_driver_unregister(&TMIO_OHCI_DRIVER); + error_tmio: +#endif #ifdef SM501_OHCI_DRIVER + platform_driver_unregister(&SM501_OHCI_DRIVER); error_sm501: #endif #ifdef SSB_OHCI_DRIVER + ssb_driver_unregister(&SSB_OHCI_DRIVER); error_ssb: #endif #ifdef PCI_DRIVER @@ -1189,6 +1207,9 @@ module_init(ohci_hcd_mod_init); static void __exit ohci_hcd_mod_exit(void) { +#ifdef TMIO_OHCI_DRIVER + platform_driver_unregister(&TMIO_OHCI_DRIVER); +#endif #ifdef SM501_OHCI_DRIVER platform_driver_unregister(&SM501_OHCI_DRIVER); #endif diff --git a/drivers/usb/host/ohci-tmio.c b/drivers/usb/host/ohci-tmio.c new file mode 100644 index 000000000000..f9f134af0bd1 --- /dev/null +++ b/drivers/usb/host/ohci-tmio.c @@ -0,0 +1,376 @@ +/* + * OHCI HCD(Host Controller Driver) for USB. + * + *(C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at> + *(C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net> + *(C) Copyright 2002 Hewlett-Packard Company + * + * Bus glue for Toshiba Mobile IO(TMIO) Controller's OHCI core + * (C) Copyright 2005 Chris Humbert <mahadri-usb@drigon.com> + * (C) Copyright 2007, 2008 Dmitry Baryshkov <dbaryshkov@gmail.com> + * + * This is known to work with the following variants: + * TC6393XB revision 3 (32kB SRAM) + * + * The TMIO's OHCI core DMAs through a small internal buffer that + * is directly addressable by the CPU. + * + * Written from sparse documentation from Toshiba and Sharp's driver + * for the 2.4 kernel, + * usb-ohci-tc6393.c(C) Copyright 2004 Lineo Solutions, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/*#include <linux/fs.h> +#include <linux/mount.h> +#include <linux/pagemap.h> +#include <linux/init.h> +#include <linux/namei.h> +#include <linux/sched.h>*/ +#include <linux/platform_device.h> +#include <linux/mfd/core.h> +#include <linux/mfd/tmio.h> +#include <linux/dma-mapping.h> + +/*-------------------------------------------------------------------------*/ + +/* + * USB Host Controller Configuration Register + */ +#define CCR_REVID 0x08 /* b Revision ID */ +#define CCR_BASE 0x10 /* l USB Control Register Base Address Low */ +#define CCR_ILME 0x40 /* b Internal Local Memory Enable */ +#define CCR_PM 0x4c /* w Power Management */ +#define CCR_INTC 0x50 /* b INT Control */ +#define CCR_LMW1L 0x54 /* w Local Memory Window 1 LMADRS Low */ +#define CCR_LMW1H 0x56 /* w Local Memory Window 1 LMADRS High */ +#define CCR_LMW1BL 0x58 /* w Local Memory Window 1 Base Address Low */ +#define CCR_LMW1BH 0x5A /* w Local Memory Window 1 Base Address High */ +#define CCR_LMW2L 0x5C /* w Local Memory Window 2 LMADRS Low */ +#define CCR_LMW2H 0x5E /* w Local Memory Window 2 LMADRS High */ +#define CCR_LMW2BL 0x60 /* w Local Memory Window 2 Base Address Low */ +#define CCR_LMW2BH 0x62 /* w Local Memory Window 2 Base Address High */ +#define CCR_MISC 0xFC /* b MISC */ + +#define CCR_PM_GKEN 0x0001 +#define CCR_PM_CKRNEN 0x0002 +#define CCR_PM_USBPW1 0x0004 +#define CCR_PM_USBPW2 0x0008 +#define CCR_PM_USBPW3 0x0008 +#define CCR_PM_PMEE 0x0100 +#define CCR_PM_PMES 0x8000 + +/*-------------------------------------------------------------------------*/ + +struct tmio_hcd { + void __iomem *ccr; + spinlock_t lock; /* protects RMW cycles */ +}; + +#define hcd_to_tmio(hcd) ((struct tmio_hcd *)(hcd_to_ohci(hcd) + 1)) + +/*-------------------------------------------------------------------------*/ + +static void tmio_write_pm(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct tmio_hcd *tmio = hcd_to_tmio(hcd); + u16 pm; + unsigned long flags; + + spin_lock_irqsave(&tmio->lock, flags); + + pm = CCR_PM_GKEN | CCR_PM_CKRNEN | + CCR_PM_PMEE | CCR_PM_PMES; + + tmio_iowrite16(pm, tmio->ccr + CCR_PM); + spin_unlock_irqrestore(&tmio->lock, flags); +} + +static void tmio_stop_hc(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + struct tmio_hcd *tmio = hcd_to_tmio(hcd); + u16 pm; + + pm = CCR_PM_GKEN | CCR_PM_CKRNEN; + switch (ohci->num_ports) { + default: + dev_err(&dev->dev, "Unsupported amount of ports: %d\n", ohci->num_ports); + case 3: + pm |= CCR_PM_USBPW3; + case 2: + pm |= CCR_PM_USBPW2; + case 1: + pm |= CCR_PM_USBPW1; + } + tmio_iowrite8(0, tmio->ccr + CCR_INTC); + tmio_iowrite8(0, tmio->ccr + CCR_ILME); + tmio_iowrite16(0, tmio->ccr + CCR_BASE); + tmio_iowrite16(0, tmio->ccr + CCR_BASE + 2); + tmio_iowrite16(pm, tmio->ccr + CCR_PM); +} + +static void tmio_start_hc(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct tmio_hcd *tmio = hcd_to_tmio(hcd); + unsigned long base = hcd->rsrc_start; + + tmio_write_pm(dev); + tmio_iowrite16(base, tmio->ccr + CCR_BASE); + tmio_iowrite16(base >> 16, tmio->ccr + CCR_BASE + 2); + tmio_iowrite8(1, tmio->ccr + CCR_ILME); + tmio_iowrite8(2, tmio->ccr + CCR_INTC); + + dev_info(&dev->dev, "revision %d @ 0x%08llx, irq %d\n", + tmio_ioread8(tmio->ccr + CCR_REVID), hcd->rsrc_start, hcd->irq); +} + +static int ohci_tmio_start(struct usb_hcd *hcd) +{ + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + int ret; + + if ((ret = ohci_init(ohci)) < 0) + return ret; + + if ((ret = ohci_run(ohci)) < 0) { + err("can't start %s", hcd->self.bus_name); + ohci_stop(hcd); + return ret; + } + + return 0; +} + +static const struct hc_driver ohci_tmio_hc_driver = { + .description = hcd_name, + .product_desc = "TMIO OHCI USB Host Controller", + .hcd_priv_size = sizeof(struct ohci_hcd) + sizeof (struct tmio_hcd), + + /* generic hardware linkage */ + .irq = ohci_irq, + .flags = HCD_USB11 | HCD_MEMORY | HCD_LOCAL_MEM, + + /* basic lifecycle operations */ + .start = ohci_tmio_start, + .stop = ohci_stop, + .shutdown = ohci_shutdown, + + /* managing i/o requests and associated device resources */ + .urb_enqueue = ohci_urb_enqueue, + .urb_dequeue = ohci_urb_dequeue, + .endpoint_disable = ohci_endpoint_disable, + + /* scheduling support */ + .get_frame_number = ohci_get_frame, + + /* root hub support */ + .hub_status_data = ohci_hub_status_data, + .hub_control = ohci_hub_control, +#ifdef CONFIG_PM + .bus_suspend = ohci_bus_suspend, + .bus_resume = ohci_bus_resume, +#endif + .start_port_reset = ohci_start_port_reset, +}; + +/*-------------------------------------------------------------------------*/ +static struct platform_driver ohci_hcd_tmio_driver; + +static int __devinit ohci_hcd_tmio_drv_probe(struct platform_device *dev) +{ + struct mfd_cell *cell = dev->dev.platform_data; + struct resource *regs = platform_get_resource(dev, IORESOURCE_MEM, 0); + struct resource *config = platform_get_resource(dev, IORESOURCE_MEM, 1); + struct resource *sram = platform_get_resource(dev, IORESOURCE_MEM, 2); + int irq = platform_get_irq(dev, 0); + struct tmio_hcd *tmio; + struct ohci_hcd *ohci; + struct usb_hcd *hcd; + int ret; + + if (usb_disabled()) + return -ENODEV; + + if (!cell) + return -EINVAL; + + hcd = usb_create_hcd(&ohci_tmio_hc_driver, &dev->dev, dev->dev.bus_id); + if (!hcd) { + ret = -ENOMEM; + goto err_usb_create_hcd; + } + + hcd->rsrc_start = regs->start; + hcd->rsrc_len = regs->end - regs->start + 1; + + tmio = hcd_to_tmio(hcd); + + spin_lock_init(&tmio->lock); + + tmio->ccr = ioremap(config->start, config->end - config->start + 1); + if (!tmio->ccr) { + ret = -ENOMEM; + goto err_ioremap_ccr; + } + + hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + if (!hcd->regs) { + ret = -ENOMEM; + goto err_ioremap_regs; + } + + if (!dma_declare_coherent_memory(&dev->dev, sram->start, + sram->start, + sram->end - sram->start + 1, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE)) { + ret = -EBUSY; + goto err_dma_declare; + } + + if (cell->enable) { + ret = cell->enable(dev); + if (ret) + goto err_enable; + } + + tmio_start_hc(dev); + ohci = hcd_to_ohci(hcd); + ohci_hcd_init(ohci); + + ret = usb_add_hcd(hcd, irq, IRQF_DISABLED); + if (ret) + goto err_add_hcd; + + if (ret == 0) + return ret; + + usb_remove_hcd(hcd); + +err_add_hcd: + tmio_stop_hc(dev); + if (cell->disable) + cell->disable(dev); +err_enable: + dma_release_declared_memory(&dev->dev); +err_dma_declare: + iounmap(hcd->regs); +err_ioremap_regs: + iounmap(tmio->ccr); +err_ioremap_ccr: + usb_put_hcd(hcd); +err_usb_create_hcd: + + return ret; +} + +static int __devexit ohci_hcd_tmio_drv_remove(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct tmio_hcd *tmio = hcd_to_tmio(hcd); + struct mfd_cell *cell = dev->dev.platform_data; + + usb_remove_hcd(hcd); + tmio_stop_hc(dev); + if (cell->disable) + cell->disable(dev); + dma_release_declared_memory(&dev->dev); + iounmap(hcd->regs); + iounmap(tmio->ccr); + usb_put_hcd(hcd); + + platform_set_drvdata(dev, NULL); + + return 0; +} + +#ifdef CONFIG_PM +static int ohci_hcd_tmio_drv_suspend(struct platform_device *dev, pm_message_t state) +{ + struct mfd_cell *cell = dev->dev.platform_data; + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + struct tmio_hcd *tmio = hcd_to_tmio(hcd); + unsigned long flags; + u8 misc; + int ret; + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + spin_lock_irqsave(&tmio->lock, flags); + + misc = tmio_ioread8(tmio->ccr + CCR_MISC); + misc |= 1 << 3; /* USSUSP */ + tmio_iowrite8(misc, tmio->ccr + CCR_MISC); + + spin_unlock_irqrestore(&tmio->lock, flags); + + if (cell->suspend) { + ret = cell->suspend(dev); + if (ret) + return ret; + } + + hcd->state = HC_STATE_SUSPENDED; + + return 0; +} + +static int ohci_hcd_tmio_drv_resume(struct platform_device *dev) +{ + struct mfd_cell *cell = dev->dev.platform_data; + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ohci_hcd *ohci = hcd_to_ohci(hcd); + struct tmio_hcd *tmio = hcd_to_tmio(hcd); + unsigned long flags; + u8 misc; + int ret; + + if (time_before(jiffies, ohci->next_statechange)) + msleep(5); + ohci->next_statechange = jiffies; + + if (cell->resume) { + ret = cell->resume(dev); + if (ret) + return ret; + } + + tmio_start_hc(dev); + + spin_lock_irqsave(&tmio->lock, flags); + + misc = tmio_ioread8(tmio->ccr + CCR_MISC); + misc &= ~(1 << 3); /* USSUSP */ + tmio_iowrite8(misc, tmio->ccr + CCR_MISC); + + spin_unlock_irqrestore(&tmio->lock, flags); + + ohci_finish_controller_resume(hcd); + + return 0; +} +#else +#define ohci_hcd_tmio_drv_suspend NULL +#define ohci_hcd_tmio_drv_resume NULL +#endif + +static struct platform_driver ohci_hcd_tmio_driver = { + .probe = ohci_hcd_tmio_drv_probe, + .remove = __devexit_p(ohci_hcd_tmio_drv_remove), + .shutdown = usb_hcd_platform_shutdown, + .suspend = ohci_hcd_tmio_drv_suspend, + .resume = ohci_hcd_tmio_drv_resume, + .driver = { + .name = "tmio-ohci", + .owner = THIS_MODULE, + }, +}; diff --git a/drivers/usb/host/whci/Kbuild b/drivers/usb/host/whci/Kbuild new file mode 100644 index 000000000000..26a3871ea0f9 --- /dev/null +++ b/drivers/usb/host/whci/Kbuild @@ -0,0 +1,11 @@ +obj-$(CONFIG_USB_WHCI_HCD) += whci-hcd.o + +whci-hcd-y := \ + asl.o \ + hcd.o \ + hw.o \ + init.o \ + int.o \ + pzl.o \ + qset.o \ + wusb.o diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c new file mode 100644 index 000000000000..4d7078e50572 --- /dev/null +++ b/drivers/usb/host/whci/asl.c @@ -0,0 +1,367 @@ +/* + * Wireless Host Controller (WHC) asynchronous schedule management. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/uwb/umc.h> +#include <linux/usb.h> +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +#if D_LOCAL >= 4 +static void dump_asl(struct whc *whc, const char *tag) +{ + struct device *dev = &whc->umc->dev; + struct whc_qset *qset; + + d_printf(4, dev, "ASL %s\n", tag); + + list_for_each_entry(qset, &whc->async_list, list_node) { + dump_qset(qset, dev); + } +} +#else +static inline void dump_asl(struct whc *whc, const char *tag) +{ +} +#endif + + +static void qset_get_next_prev(struct whc *whc, struct whc_qset *qset, + struct whc_qset **next, struct whc_qset **prev) +{ + struct list_head *n, *p; + + BUG_ON(list_empty(&whc->async_list)); + + n = qset->list_node.next; + if (n == &whc->async_list) + n = n->next; + p = qset->list_node.prev; + if (p == &whc->async_list) + p = p->prev; + + *next = container_of(n, struct whc_qset, list_node); + *prev = container_of(p, struct whc_qset, list_node); + +} + +static void asl_qset_insert_begin(struct whc *whc, struct whc_qset *qset) +{ + list_move(&qset->list_node, &whc->async_list); + qset->in_sw_list = true; +} + +static void asl_qset_insert(struct whc *whc, struct whc_qset *qset) +{ + struct whc_qset *next, *prev; + + qset_clear(whc, qset); + + /* Link into ASL. */ + qset_get_next_prev(whc, qset, &next, &prev); + whc_qset_set_link_ptr(&qset->qh.link, next->qset_dma); + whc_qset_set_link_ptr(&prev->qh.link, qset->qset_dma); + qset->in_hw_list = true; +} + +static void asl_qset_remove(struct whc *whc, struct whc_qset *qset) +{ + struct whc_qset *prev, *next; + + qset_get_next_prev(whc, qset, &next, &prev); + + list_move(&qset->list_node, &whc->async_removed_list); + qset->in_sw_list = false; + + /* + * No more qsets in the ASL? The caller must stop the ASL as + * it's no longer valid. + */ + if (list_empty(&whc->async_list)) + return; + + /* Remove from ASL. */ + whc_qset_set_link_ptr(&prev->qh.link, next->qset_dma); + qset->in_hw_list = false; +} + +/** + * process_qset - process any recently inactivated or halted qTDs in a + * qset. + * + * After inactive qTDs are removed, new qTDs can be added if the + * urb queue still contains URBs. + * + * Returns any additional WUSBCMD bits for the ASL sync command (i.e., + * WUSBCMD_ASYNC_QSET_RM if a halted qset was removed). + */ +static uint32_t process_qset(struct whc *whc, struct whc_qset *qset) +{ + enum whc_update update = 0; + uint32_t status = 0; + + while (qset->ntds) { + struct whc_qtd *td; + int t; + + t = qset->td_start; + td = &qset->qtd[qset->td_start]; + status = le32_to_cpu(td->status); + + /* + * Nothing to do with a still active qTD. + */ + if (status & QTD_STS_ACTIVE) + break; + + if (status & QTD_STS_HALTED) { + /* Ug, an error. */ + process_halted_qtd(whc, qset, td); + goto done; + } + + /* Mmm, a completed qTD. */ + process_inactive_qtd(whc, qset, td); + } + + update |= qset_add_qtds(whc, qset); + +done: + /* + * Remove this qset from the ASL if requested, but only if has + * no qTDs. + */ + if (qset->remove && qset->ntds == 0) { + asl_qset_remove(whc, qset); + update |= WHC_UPDATE_REMOVED; + } + return update; +} + +void asl_start(struct whc *whc) +{ + struct whc_qset *qset; + + qset = list_first_entry(&whc->async_list, struct whc_qset, list_node); + + le_writeq(qset->qset_dma | QH_LINK_NTDS(8), whc->base + WUSBASYNCLISTADDR); + + whc_write_wusbcmd(whc, WUSBCMD_ASYNC_EN, WUSBCMD_ASYNC_EN); + whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, + WUSBSTS_ASYNC_SCHED, WUSBSTS_ASYNC_SCHED, + 1000, "start ASL"); +} + +void asl_stop(struct whc *whc) +{ + whc_write_wusbcmd(whc, WUSBCMD_ASYNC_EN, 0); + whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, + WUSBSTS_ASYNC_SCHED, 0, + 1000, "stop ASL"); +} + +void asl_update(struct whc *whc, uint32_t wusbcmd) +{ + whc_write_wusbcmd(whc, wusbcmd, wusbcmd); + wait_event(whc->async_list_wq, + (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0); +} + +/** + * scan_async_work - scan the ASL for qsets to process. + * + * Process each qset in the ASL in turn and then signal the WHC that + * the ASL has been updated. + * + * Then start, stop or update the asynchronous schedule as required. + */ +void scan_async_work(struct work_struct *work) +{ + struct whc *whc = container_of(work, struct whc, async_work); + struct whc_qset *qset, *t; + enum whc_update update = 0; + + spin_lock_irq(&whc->lock); + + dump_asl(whc, "before processing"); + + /* + * Transerve the software list backwards so new qsets can be + * safely inserted into the ASL without making it non-circular. + */ + list_for_each_entry_safe_reverse(qset, t, &whc->async_list, list_node) { + if (!qset->in_hw_list) { + asl_qset_insert(whc, qset); + update |= WHC_UPDATE_ADDED; + } + + update |= process_qset(whc, qset); + } + + dump_asl(whc, "after processing"); + + spin_unlock_irq(&whc->lock); + + if (update) { + uint32_t wusbcmd = WUSBCMD_ASYNC_UPDATED | WUSBCMD_ASYNC_SYNCED_DB; + if (update & WHC_UPDATE_REMOVED) + wusbcmd |= WUSBCMD_ASYNC_QSET_RM; + asl_update(whc, wusbcmd); + } + + /* + * Now that the ASL is updated, complete the removal of any + * removed qsets. + */ + spin_lock(&whc->lock); + + list_for_each_entry_safe(qset, t, &whc->async_removed_list, list_node) { + qset_remove_complete(whc, qset); + } + + spin_unlock(&whc->lock); +} + +/** + * asl_urb_enqueue - queue an URB onto the asynchronous list (ASL). + * @whc: the WHCI host controller + * @urb: the URB to enqueue + * @mem_flags: flags for any memory allocations + * + * The qset for the endpoint is obtained and the urb queued on to it. + * + * Work is scheduled to update the hardware's view of the ASL. + */ +int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags) +{ + struct whc_qset *qset; + int err; + unsigned long flags; + + spin_lock_irqsave(&whc->lock, flags); + + qset = get_qset(whc, urb, GFP_ATOMIC); + if (qset == NULL) + err = -ENOMEM; + else + err = qset_add_urb(whc, qset, urb, GFP_ATOMIC); + if (!err) { + usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); + if (!qset->in_sw_list) + asl_qset_insert_begin(whc, qset); + } + + spin_unlock_irqrestore(&whc->lock, flags); + + if (!err) + queue_work(whc->workqueue, &whc->async_work); + + return 0; +} + +/** + * asl_urb_dequeue - remove an URB (qset) from the async list. + * @whc: the WHCI host controller + * @urb: the URB to dequeue + * @status: the current status of the URB + * + * URBs that do yet have qTDs can simply be removed from the software + * queue, otherwise the qset must be removed from the ASL so the qTDs + * can be removed. + */ +int asl_urb_dequeue(struct whc *whc, struct urb *urb, int status) +{ + struct whc_urb *wurb = urb->hcpriv; + struct whc_qset *qset = wurb->qset; + struct whc_std *std, *t; + int ret; + unsigned long flags; + + spin_lock_irqsave(&whc->lock, flags); + + ret = usb_hcd_check_unlink_urb(&whc->wusbhc.usb_hcd, urb, status); + if (ret < 0) + goto out; + + list_for_each_entry_safe(std, t, &qset->stds, list_node) { + if (std->urb == urb) + qset_free_std(whc, std); + else + std->qtd = NULL; /* so this std is re-added when the qset is */ + } + + asl_qset_remove(whc, qset); + wurb->status = status; + wurb->is_async = true; + queue_work(whc->workqueue, &wurb->dequeue_work); + +out: + spin_unlock_irqrestore(&whc->lock, flags); + + return ret; +} + +/** + * asl_qset_delete - delete a qset from the ASL + */ +void asl_qset_delete(struct whc *whc, struct whc_qset *qset) +{ + qset->remove = 1; + queue_work(whc->workqueue, &whc->async_work); + qset_delete(whc, qset); +} + +/** + * asl_init - initialize the asynchronous schedule list + * + * A dummy qset with no qTDs is added to the ASL to simplify removing + * qsets (no need to stop the ASL when the last qset is removed). + */ +int asl_init(struct whc *whc) +{ + struct whc_qset *qset; + + qset = qset_alloc(whc, GFP_KERNEL); + if (qset == NULL) + return -ENOMEM; + + asl_qset_insert_begin(whc, qset); + asl_qset_insert(whc, qset); + + return 0; +} + +/** + * asl_clean_up - free ASL resources + * + * The ASL is stopped and empty except for the dummy qset. + */ +void asl_clean_up(struct whc *whc) +{ + struct whc_qset *qset; + + if (!list_empty(&whc->async_list)) { + qset = list_first_entry(&whc->async_list, struct whc_qset, list_node); + list_del(&qset->list_node); + qset_free(whc, qset); + } +} diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c new file mode 100644 index 000000000000..ef3ad4dca945 --- /dev/null +++ b/drivers/usb/host/whci/hcd.c @@ -0,0 +1,339 @@ +/* + * Wireless Host Controller (WHC) driver. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/uwb/umc.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +/* + * One time initialization. + * + * Nothing to do here. + */ +static int whc_reset(struct usb_hcd *usb_hcd) +{ + return 0; +} + +/* + * Start the wireless host controller. + * + * Start device notification. + * + * Put hc into run state, set DNTS parameters. + */ +static int whc_start(struct usb_hcd *usb_hcd) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + u8 bcid; + int ret; + + mutex_lock(&wusbhc->mutex); + + le_writel(WUSBINTR_GEN_CMD_DONE + | WUSBINTR_HOST_ERR + | WUSBINTR_ASYNC_SCHED_SYNCED + | WUSBINTR_DNTS_INT + | WUSBINTR_ERR_INT + | WUSBINTR_INT, + whc->base + WUSBINTR); + + /* set cluster ID */ + bcid = wusb_cluster_id_get(); + ret = whc_set_cluster_id(whc, bcid); + if (ret < 0) + goto out; + wusbhc->cluster_id = bcid; + + /* start HC */ + whc_write_wusbcmd(whc, WUSBCMD_RUN, WUSBCMD_RUN); + + usb_hcd->uses_new_polling = 1; + usb_hcd->poll_rh = 1; + usb_hcd->state = HC_STATE_RUNNING; + +out: + mutex_unlock(&wusbhc->mutex); + return ret; +} + + +/* + * Stop the wireless host controller. + * + * Stop device notification. + * + * Wait for pending transfer to stop? Put hc into stop state? + */ +static void whc_stop(struct usb_hcd *usb_hcd) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + + mutex_lock(&wusbhc->mutex); + + wusbhc_stop(wusbhc); + + /* stop HC */ + le_writel(0, whc->base + WUSBINTR); + whc_write_wusbcmd(whc, WUSBCMD_RUN, 0); + whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, + WUSBSTS_HCHALTED, WUSBSTS_HCHALTED, + 100, "HC to halt"); + + wusb_cluster_id_put(wusbhc->cluster_id); + + mutex_unlock(&wusbhc->mutex); +} + +static int whc_get_frame_number(struct usb_hcd *usb_hcd) +{ + /* Frame numbers are not applicable to WUSB. */ + return -ENOSYS; +} + + +/* + * Queue an URB to the ASL or PZL + */ +static int whc_urb_enqueue(struct usb_hcd *usb_hcd, struct urb *urb, + gfp_t mem_flags) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + int ret; + + switch (usb_pipetype(urb->pipe)) { + case PIPE_INTERRUPT: + ret = pzl_urb_enqueue(whc, urb, mem_flags); + break; + case PIPE_ISOCHRONOUS: + dev_err(&whc->umc->dev, "isochronous transfers unsupported\n"); + ret = -ENOTSUPP; + break; + case PIPE_CONTROL: + case PIPE_BULK: + default: + ret = asl_urb_enqueue(whc, urb, mem_flags); + break; + }; + + return ret; +} + +/* + * Remove a queued URB from the ASL or PZL. + */ +static int whc_urb_dequeue(struct usb_hcd *usb_hcd, struct urb *urb, int status) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + int ret; + + switch (usb_pipetype(urb->pipe)) { + case PIPE_INTERRUPT: + ret = pzl_urb_dequeue(whc, urb, status); + break; + case PIPE_ISOCHRONOUS: + ret = -ENOTSUPP; + break; + case PIPE_CONTROL: + case PIPE_BULK: + default: + ret = asl_urb_dequeue(whc, urb, status); + break; + }; + + return ret; +} + +/* + * Wait for all URBs to the endpoint to be completed, then delete the + * qset. + */ +static void whc_endpoint_disable(struct usb_hcd *usb_hcd, + struct usb_host_endpoint *ep) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + struct whc_qset *qset; + + qset = ep->hcpriv; + if (qset) { + ep->hcpriv = NULL; + if (usb_endpoint_xfer_bulk(&ep->desc) + || usb_endpoint_xfer_control(&ep->desc)) + asl_qset_delete(whc, qset); + else + pzl_qset_delete(whc, qset); + } +} + +static struct hc_driver whc_hc_driver = { + .description = "whci-hcd", + .product_desc = "Wireless host controller", + .hcd_priv_size = sizeof(struct whc) - sizeof(struct usb_hcd), + .irq = whc_int_handler, + .flags = HCD_USB2, + + .reset = whc_reset, + .start = whc_start, + .stop = whc_stop, + .get_frame_number = whc_get_frame_number, + .urb_enqueue = whc_urb_enqueue, + .urb_dequeue = whc_urb_dequeue, + .endpoint_disable = whc_endpoint_disable, + + .hub_status_data = wusbhc_rh_status_data, + .hub_control = wusbhc_rh_control, + .bus_suspend = wusbhc_rh_suspend, + .bus_resume = wusbhc_rh_resume, + .start_port_reset = wusbhc_rh_start_port_reset, +}; + +static int whc_probe(struct umc_dev *umc) +{ + int ret = -ENOMEM; + struct usb_hcd *usb_hcd; + struct wusbhc *wusbhc = NULL; + struct whc *whc = NULL; + struct device *dev = &umc->dev; + + usb_hcd = usb_create_hcd(&whc_hc_driver, dev, "whci"); + if (usb_hcd == NULL) { + dev_err(dev, "unable to create hcd\n"); + goto error; + } + + usb_hcd->wireless = 1; + + wusbhc = usb_hcd_to_wusbhc(usb_hcd); + whc = wusbhc_to_whc(wusbhc); + whc->umc = umc; + + ret = whc_init(whc); + if (ret) + goto error; + + wusbhc->dev = dev; + wusbhc->uwb_rc = uwb_rc_get_by_grandpa(umc->dev.parent); + if (!wusbhc->uwb_rc) { + ret = -ENODEV; + dev_err(dev, "cannot get radio controller\n"); + goto error; + } + + if (whc->n_devices > USB_MAXCHILDREN) { + dev_warn(dev, "USB_MAXCHILDREN too low for WUSB adapter (%u ports)\n", + whc->n_devices); + wusbhc->ports_max = USB_MAXCHILDREN; + } else + wusbhc->ports_max = whc->n_devices; + wusbhc->mmcies_max = whc->n_mmc_ies; + wusbhc->start = whc_wusbhc_start; + wusbhc->stop = whc_wusbhc_stop; + wusbhc->mmcie_add = whc_mmcie_add; + wusbhc->mmcie_rm = whc_mmcie_rm; + wusbhc->dev_info_set = whc_dev_info_set; + wusbhc->bwa_set = whc_bwa_set; + wusbhc->set_num_dnts = whc_set_num_dnts; + wusbhc->set_ptk = whc_set_ptk; + wusbhc->set_gtk = whc_set_gtk; + + ret = wusbhc_create(wusbhc); + if (ret) + goto error_wusbhc_create; + + ret = usb_add_hcd(usb_hcd, whc->umc->irq, IRQF_SHARED); + if (ret) { + dev_err(dev, "cannot add HCD: %d\n", ret); + goto error_usb_add_hcd; + } + + ret = wusbhc_b_create(wusbhc); + if (ret) { + dev_err(dev, "WUSBHC phase B setup failed: %d\n", ret); + goto error_wusbhc_b_create; + } + + return 0; + +error_wusbhc_b_create: + usb_remove_hcd(usb_hcd); +error_usb_add_hcd: + wusbhc_destroy(wusbhc); +error_wusbhc_create: + uwb_rc_put(wusbhc->uwb_rc); +error: + whc_clean_up(whc); + if (usb_hcd) + usb_put_hcd(usb_hcd); + return ret; +} + + +static void whc_remove(struct umc_dev *umc) +{ + struct usb_hcd *usb_hcd = dev_get_drvdata(&umc->dev); + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + + if (usb_hcd) { + wusbhc_b_destroy(wusbhc); + usb_remove_hcd(usb_hcd); + wusbhc_destroy(wusbhc); + uwb_rc_put(wusbhc->uwb_rc); + whc_clean_up(whc); + usb_put_hcd(usb_hcd); + } +} + +static struct umc_driver whci_hc_driver = { + .name = "whci-hcd", + .cap_id = UMC_CAP_ID_WHCI_WUSB_HC, + .probe = whc_probe, + .remove = whc_remove, +}; + +static int __init whci_hc_driver_init(void) +{ + return umc_driver_register(&whci_hc_driver); +} +module_init(whci_hc_driver_init); + +static void __exit whci_hc_driver_exit(void) +{ + umc_driver_unregister(&whci_hc_driver); +} +module_exit(whci_hc_driver_exit); + +/* PCI device ID's that we handle (so it gets loaded) */ +static struct pci_device_id whci_hcd_id_table[] = { + { PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) }, + { /* empty last entry */ } +}; +MODULE_DEVICE_TABLE(pci, whci_hcd_id_table); + +MODULE_DESCRIPTION("WHCI Wireless USB host controller driver"); +MODULE_AUTHOR("Cambridge Silicon Radio Ltd."); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/whci/hw.c b/drivers/usb/host/whci/hw.c new file mode 100644 index 000000000000..ac86e59c1225 --- /dev/null +++ b/drivers/usb/host/whci/hw.c @@ -0,0 +1,87 @@ +/* + * Wireless Host Controller (WHC) hardware access helpers. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/uwb/umc.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val) +{ + unsigned long flags; + u32 cmd; + + spin_lock_irqsave(&whc->lock, flags); + + cmd = le_readl(whc->base + WUSBCMD); + cmd = (cmd & ~mask) | val; + le_writel(cmd, whc->base + WUSBCMD); + + spin_unlock_irqrestore(&whc->lock, flags); +} + +/** + * whc_do_gencmd - start a generic command via the WUSBGENCMDSTS register + * @whc: the WHCI HC + * @cmd: command to start. + * @params: parameters for the command (the WUSBGENCMDPARAMS register value). + * @addr: pointer to any data for the command (may be NULL). + * @len: length of the data (if any). + */ +int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len) +{ + unsigned long flags; + dma_addr_t dma_addr; + int t; + + mutex_lock(&whc->mutex); + + /* Wait for previous command to complete. */ + t = wait_event_timeout(whc->cmd_wq, + (le_readl(whc->base + WUSBGENCMDSTS) & WUSBGENCMDSTS_ACTIVE) == 0, + WHC_GENCMD_TIMEOUT_MS); + if (t == 0) { + dev_err(&whc->umc->dev, "generic command timeout (%04x/%04x)\n", + le_readl(whc->base + WUSBGENCMDSTS), + le_readl(whc->base + WUSBGENCMDPARAMS)); + return -ETIMEDOUT; + } + + if (addr) { + memcpy(whc->gen_cmd_buf, addr, len); + dma_addr = whc->gen_cmd_buf_dma; + } else + dma_addr = 0; + + /* Poke registers to start cmd. */ + spin_lock_irqsave(&whc->lock, flags); + + le_writel(params, whc->base + WUSBGENCMDPARAMS); + le_writeq(dma_addr, whc->base + WUSBGENADDR); + + le_writel(WUSBGENCMDSTS_ACTIVE | WUSBGENCMDSTS_IOC | cmd, + whc->base + WUSBGENCMDSTS); + + spin_unlock_irqrestore(&whc->lock, flags); + + mutex_unlock(&whc->mutex); + + return 0; +} diff --git a/drivers/usb/host/whci/init.c b/drivers/usb/host/whci/init.c new file mode 100644 index 000000000000..34a783cb0133 --- /dev/null +++ b/drivers/usb/host/whci/init.c @@ -0,0 +1,188 @@ +/* + * Wireless Host Controller (WHC) initialization. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/uwb/umc.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +/* + * Reset the host controller. + */ +static void whc_hw_reset(struct whc *whc) +{ + le_writel(WUSBCMD_WHCRESET, whc->base + WUSBCMD); + whci_wait_for(&whc->umc->dev, whc->base + WUSBCMD, WUSBCMD_WHCRESET, 0, + 100, "reset"); +} + +static void whc_hw_init_di_buf(struct whc *whc) +{ + int d; + + /* Disable all entries in the Device Information buffer. */ + for (d = 0; d < whc->n_devices; d++) + whc->di_buf[d].addr_sec_info = WHC_DI_DISABLE; + + le_writeq(whc->di_buf_dma, whc->base + WUSBDEVICEINFOADDR); +} + +static void whc_hw_init_dn_buf(struct whc *whc) +{ + /* Clear the Device Notification buffer to ensure the V (valid) + * bits are clear. */ + memset(whc->dn_buf, 0, 4096); + + le_writeq(whc->dn_buf_dma, whc->base + WUSBDNTSBUFADDR); +} + +int whc_init(struct whc *whc) +{ + u32 whcsparams; + int ret, i; + resource_size_t start, len; + + spin_lock_init(&whc->lock); + mutex_init(&whc->mutex); + init_waitqueue_head(&whc->cmd_wq); + init_waitqueue_head(&whc->async_list_wq); + init_waitqueue_head(&whc->periodic_list_wq); + whc->workqueue = create_singlethread_workqueue(dev_name(&whc->umc->dev)); + if (whc->workqueue == NULL) { + ret = -ENOMEM; + goto error; + } + INIT_WORK(&whc->dn_work, whc_dn_work); + + INIT_WORK(&whc->async_work, scan_async_work); + INIT_LIST_HEAD(&whc->async_list); + INIT_LIST_HEAD(&whc->async_removed_list); + + INIT_WORK(&whc->periodic_work, scan_periodic_work); + for (i = 0; i < 5; i++) + INIT_LIST_HEAD(&whc->periodic_list[i]); + INIT_LIST_HEAD(&whc->periodic_removed_list); + + /* Map HC registers. */ + start = whc->umc->resource.start; + len = whc->umc->resource.end - start + 1; + if (!request_mem_region(start, len, "whci-hc")) { + dev_err(&whc->umc->dev, "can't request HC region\n"); + ret = -EBUSY; + goto error; + } + whc->base_phys = start; + whc->base = ioremap(start, len); + if (!whc->base) { + dev_err(&whc->umc->dev, "ioremap\n"); + ret = -ENOMEM; + goto error; + } + + whc_hw_reset(whc); + + /* Read maximum number of devices, keys and MMC IEs. */ + whcsparams = le_readl(whc->base + WHCSPARAMS); + whc->n_devices = WHCSPARAMS_TO_N_DEVICES(whcsparams); + whc->n_keys = WHCSPARAMS_TO_N_KEYS(whcsparams); + whc->n_mmc_ies = WHCSPARAMS_TO_N_MMC_IES(whcsparams); + + dev_dbg(&whc->umc->dev, "N_DEVICES = %d, N_KEYS = %d, N_MMC_IES = %d\n", + whc->n_devices, whc->n_keys, whc->n_mmc_ies); + + whc->qset_pool = dma_pool_create("qset", &whc->umc->dev, + sizeof(struct whc_qset), 64, 0); + if (whc->qset_pool == NULL) { + ret = -ENOMEM; + goto error; + } + + ret = asl_init(whc); + if (ret < 0) + goto error; + ret = pzl_init(whc); + if (ret < 0) + goto error; + + /* Allocate and initialize a buffer for generic commands, the + Device Information buffer, and the Device Notification + buffer. */ + + whc->gen_cmd_buf = dma_alloc_coherent(&whc->umc->dev, WHC_GEN_CMD_DATA_LEN, + &whc->gen_cmd_buf_dma, GFP_KERNEL); + if (whc->gen_cmd_buf == NULL) { + ret = -ENOMEM; + goto error; + } + + whc->dn_buf = dma_alloc_coherent(&whc->umc->dev, + sizeof(struct dn_buf_entry) * WHC_N_DN_ENTRIES, + &whc->dn_buf_dma, GFP_KERNEL); + if (!whc->dn_buf) { + ret = -ENOMEM; + goto error; + } + whc_hw_init_dn_buf(whc); + + whc->di_buf = dma_alloc_coherent(&whc->umc->dev, + sizeof(struct di_buf_entry) * whc->n_devices, + &whc->di_buf_dma, GFP_KERNEL); + if (!whc->di_buf) { + ret = -ENOMEM; + goto error; + } + whc_hw_init_di_buf(whc); + + return 0; + +error: + whc_clean_up(whc); + return ret; +} + +void whc_clean_up(struct whc *whc) +{ + resource_size_t len; + + if (whc->di_buf) + dma_free_coherent(&whc->umc->dev, sizeof(struct di_buf_entry) * whc->n_devices, + whc->di_buf, whc->di_buf_dma); + if (whc->dn_buf) + dma_free_coherent(&whc->umc->dev, sizeof(struct dn_buf_entry) * WHC_N_DN_ENTRIES, + whc->dn_buf, whc->dn_buf_dma); + if (whc->gen_cmd_buf) + dma_free_coherent(&whc->umc->dev, WHC_GEN_CMD_DATA_LEN, + whc->gen_cmd_buf, whc->gen_cmd_buf_dma); + + pzl_clean_up(whc); + asl_clean_up(whc); + + if (whc->qset_pool) + dma_pool_destroy(whc->qset_pool); + + len = whc->umc->resource.end - whc->umc->resource.start + 1; + if (whc->base) + iounmap(whc->base); + if (whc->base_phys) + release_mem_region(whc->base_phys, len); + + if (whc->workqueue) + destroy_workqueue(whc->workqueue); +} diff --git a/drivers/usb/host/whci/int.c b/drivers/usb/host/whci/int.c new file mode 100644 index 000000000000..fce01174aa9b --- /dev/null +++ b/drivers/usb/host/whci/int.c @@ -0,0 +1,95 @@ +/* + * Wireless Host Controller (WHC) interrupt handling. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/uwb/umc.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +static void transfer_done(struct whc *whc) +{ + queue_work(whc->workqueue, &whc->async_work); + queue_work(whc->workqueue, &whc->periodic_work); +} + +irqreturn_t whc_int_handler(struct usb_hcd *hcd) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(hcd); + struct whc *whc = wusbhc_to_whc(wusbhc); + u32 sts; + + sts = le_readl(whc->base + WUSBSTS); + if (!(sts & WUSBSTS_INT_MASK)) + return IRQ_NONE; + le_writel(sts & WUSBSTS_INT_MASK, whc->base + WUSBSTS); + + if (sts & WUSBSTS_GEN_CMD_DONE) + wake_up(&whc->cmd_wq); + + if (sts & WUSBSTS_HOST_ERR) + dev_err(&whc->umc->dev, "FIXME: host system error\n"); + + if (sts & WUSBSTS_ASYNC_SCHED_SYNCED) + wake_up(&whc->async_list_wq); + + if (sts & WUSBSTS_PERIODIC_SCHED_SYNCED) + wake_up(&whc->periodic_list_wq); + + if (sts & WUSBSTS_DNTS_INT) + queue_work(whc->workqueue, &whc->dn_work); + + /* + * A transfer completed (see [WHCI] section 4.7.1.2 for when + * this occurs). + */ + if (sts & (WUSBSTS_INT | WUSBSTS_ERR_INT)) + transfer_done(whc); + + return IRQ_HANDLED; +} + +static int process_dn_buf(struct whc *whc) +{ + struct wusbhc *wusbhc = &whc->wusbhc; + struct dn_buf_entry *dn; + int processed = 0; + + for (dn = whc->dn_buf; dn < whc->dn_buf + WHC_N_DN_ENTRIES; dn++) { + if (dn->status & WHC_DN_STATUS_VALID) { + wusbhc_handle_dn(wusbhc, dn->src_addr, + (struct wusb_dn_hdr *)dn->dn_data, + dn->msg_size); + dn->status &= ~WHC_DN_STATUS_VALID; + processed++; + } + } + return processed; +} + +void whc_dn_work(struct work_struct *work) +{ + struct whc *whc = container_of(work, struct whc, dn_work); + int processed; + + do { + processed = process_dn_buf(whc); + } while (processed); +} diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c new file mode 100644 index 000000000000..8d62df0c330b --- /dev/null +++ b/drivers/usb/host/whci/pzl.c @@ -0,0 +1,398 @@ +/* + * Wireless Host Controller (WHC) periodic schedule management. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/uwb/umc.h> +#include <linux/usb.h> +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +#if D_LOCAL >= 4 +static void dump_pzl(struct whc *whc, const char *tag) +{ + struct device *dev = &whc->umc->dev; + struct whc_qset *qset; + int period = 0; + + d_printf(4, dev, "PZL %s\n", tag); + + for (period = 0; period < 5; period++) { + d_printf(4, dev, "Period %d\n", period); + list_for_each_entry(qset, &whc->periodic_list[period], list_node) { + dump_qset(qset, dev); + } + } +} +#else +static inline void dump_pzl(struct whc *whc, const char *tag) +{ +} +#endif + +static void update_pzl_pointers(struct whc *whc, int period, u64 addr) +{ + switch (period) { + case 0: + whc_qset_set_link_ptr(&whc->pz_list[0], addr); + whc_qset_set_link_ptr(&whc->pz_list[2], addr); + whc_qset_set_link_ptr(&whc->pz_list[4], addr); + whc_qset_set_link_ptr(&whc->pz_list[6], addr); + whc_qset_set_link_ptr(&whc->pz_list[8], addr); + whc_qset_set_link_ptr(&whc->pz_list[10], addr); + whc_qset_set_link_ptr(&whc->pz_list[12], addr); + whc_qset_set_link_ptr(&whc->pz_list[14], addr); + break; + case 1: + whc_qset_set_link_ptr(&whc->pz_list[1], addr); + whc_qset_set_link_ptr(&whc->pz_list[5], addr); + whc_qset_set_link_ptr(&whc->pz_list[9], addr); + whc_qset_set_link_ptr(&whc->pz_list[13], addr); + break; + case 2: + whc_qset_set_link_ptr(&whc->pz_list[3], addr); + whc_qset_set_link_ptr(&whc->pz_list[11], addr); + break; + case 3: + whc_qset_set_link_ptr(&whc->pz_list[7], addr); + break; + case 4: + whc_qset_set_link_ptr(&whc->pz_list[15], addr); + break; + } +} + +/* + * Return the 'period' to use for this qset. The minimum interval for + * the endpoint is used so whatever urbs are submitted the device is + * polled often enough. + */ +static int qset_get_period(struct whc *whc, struct whc_qset *qset) +{ + uint8_t bInterval = qset->ep->desc.bInterval; + + if (bInterval < 6) + bInterval = 6; + if (bInterval > 10) + bInterval = 10; + return bInterval - 6; +} + +static void qset_insert_in_sw_list(struct whc *whc, struct whc_qset *qset) +{ + int period; + + period = qset_get_period(whc, qset); + + qset_clear(whc, qset); + list_move(&qset->list_node, &whc->periodic_list[period]); + qset->in_sw_list = true; +} + +static void pzl_qset_remove(struct whc *whc, struct whc_qset *qset) +{ + list_move(&qset->list_node, &whc->periodic_removed_list); + qset->in_hw_list = false; + qset->in_sw_list = false; +} + +/** + * pzl_process_qset - process any recently inactivated or halted qTDs + * in a qset. + * + * After inactive qTDs are removed, new qTDs can be added if the + * urb queue still contains URBs. + * + * Returns the schedule updates required. + */ +static enum whc_update pzl_process_qset(struct whc *whc, struct whc_qset *qset) +{ + enum whc_update update = 0; + uint32_t status = 0; + + while (qset->ntds) { + struct whc_qtd *td; + int t; + + t = qset->td_start; + td = &qset->qtd[qset->td_start]; + status = le32_to_cpu(td->status); + + /* + * Nothing to do with a still active qTD. + */ + if (status & QTD_STS_ACTIVE) + break; + + if (status & QTD_STS_HALTED) { + /* Ug, an error. */ + process_halted_qtd(whc, qset, td); + goto done; + } + + /* Mmm, a completed qTD. */ + process_inactive_qtd(whc, qset, td); + } + + update |= qset_add_qtds(whc, qset); + +done: + /* + * If there are no qTDs in this qset, remove it from the PZL. + */ + if (qset->remove && qset->ntds == 0) { + pzl_qset_remove(whc, qset); + update |= WHC_UPDATE_REMOVED; + } + + return update; +} + +/** + * pzl_start - start the periodic schedule + * @whc: the WHCI host controller + * + * The PZL must be valid (e.g., all entries in the list should have + * the T bit set). + */ +void pzl_start(struct whc *whc) +{ + le_writeq(whc->pz_list_dma, whc->base + WUSBPERIODICLISTBASE); + + whc_write_wusbcmd(whc, WUSBCMD_PERIODIC_EN, WUSBCMD_PERIODIC_EN); + whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, + WUSBSTS_PERIODIC_SCHED, WUSBSTS_PERIODIC_SCHED, + 1000, "start PZL"); +} + +/** + * pzl_stop - stop the periodic schedule + * @whc: the WHCI host controller + */ +void pzl_stop(struct whc *whc) +{ + whc_write_wusbcmd(whc, WUSBCMD_PERIODIC_EN, 0); + whci_wait_for(&whc->umc->dev, whc->base + WUSBSTS, + WUSBSTS_PERIODIC_SCHED, 0, + 1000, "stop PZL"); +} + +void pzl_update(struct whc *whc, uint32_t wusbcmd) +{ + whc_write_wusbcmd(whc, wusbcmd, wusbcmd); + wait_event(whc->periodic_list_wq, + (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0); +} + +static void update_pzl_hw_view(struct whc *whc) +{ + struct whc_qset *qset, *t; + int period; + u64 tmp_qh = 0; + + for (period = 0; period < 5; period++) { + list_for_each_entry_safe(qset, t, &whc->periodic_list[period], list_node) { + whc_qset_set_link_ptr(&qset->qh.link, tmp_qh); + tmp_qh = qset->qset_dma; + qset->in_hw_list = true; + } + update_pzl_pointers(whc, period, tmp_qh); + } +} + +/** + * scan_periodic_work - scan the PZL for qsets to process. + * + * Process each qset in the PZL in turn and then signal the WHC that + * the PZL has been updated. + * + * Then start, stop or update the periodic schedule as required. + */ +void scan_periodic_work(struct work_struct *work) +{ + struct whc *whc = container_of(work, struct whc, periodic_work); + struct whc_qset *qset, *t; + enum whc_update update = 0; + int period; + + spin_lock_irq(&whc->lock); + + dump_pzl(whc, "before processing"); + + for (period = 4; period >= 0; period--) { + list_for_each_entry_safe(qset, t, &whc->periodic_list[period], list_node) { + if (!qset->in_hw_list) + update |= WHC_UPDATE_ADDED; + update |= pzl_process_qset(whc, qset); + } + } + + if (update & (WHC_UPDATE_ADDED | WHC_UPDATE_REMOVED)) + update_pzl_hw_view(whc); + + dump_pzl(whc, "after processing"); + + spin_unlock_irq(&whc->lock); + + if (update) { + uint32_t wusbcmd = WUSBCMD_PERIODIC_UPDATED | WUSBCMD_PERIODIC_SYNCED_DB; + if (update & WHC_UPDATE_REMOVED) + wusbcmd |= WUSBCMD_PERIODIC_QSET_RM; + pzl_update(whc, wusbcmd); + } + + /* + * Now that the PZL is updated, complete the removal of any + * removed qsets. + */ + spin_lock(&whc->lock); + + list_for_each_entry_safe(qset, t, &whc->periodic_removed_list, list_node) { + qset_remove_complete(whc, qset); + } + + spin_unlock(&whc->lock); +} + +/** + * pzl_urb_enqueue - queue an URB onto the periodic list (PZL) + * @whc: the WHCI host controller + * @urb: the URB to enqueue + * @mem_flags: flags for any memory allocations + * + * The qset for the endpoint is obtained and the urb queued on to it. + * + * Work is scheduled to update the hardware's view of the PZL. + */ +int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags) +{ + struct whc_qset *qset; + int err; + unsigned long flags; + + spin_lock_irqsave(&whc->lock, flags); + + qset = get_qset(whc, urb, GFP_ATOMIC); + if (qset == NULL) + err = -ENOMEM; + else + err = qset_add_urb(whc, qset, urb, GFP_ATOMIC); + if (!err) { + usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb); + if (!qset->in_sw_list) + qset_insert_in_sw_list(whc, qset); + } + + spin_unlock_irqrestore(&whc->lock, flags); + + if (!err) + queue_work(whc->workqueue, &whc->periodic_work); + + return 0; +} + +/** + * pzl_urb_dequeue - remove an URB (qset) from the periodic list + * @whc: the WHCI host controller + * @urb: the URB to dequeue + * @status: the current status of the URB + * + * URBs that do yet have qTDs can simply be removed from the software + * queue, otherwise the qset must be removed so the qTDs can be safely + * removed. + */ +int pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status) +{ + struct whc_urb *wurb = urb->hcpriv; + struct whc_qset *qset = wurb->qset; + struct whc_std *std, *t; + int ret; + unsigned long flags; + + spin_lock_irqsave(&whc->lock, flags); + + ret = usb_hcd_check_unlink_urb(&whc->wusbhc.usb_hcd, urb, status); + if (ret < 0) + goto out; + + list_for_each_entry_safe(std, t, &qset->stds, list_node) { + if (std->urb == urb) + qset_free_std(whc, std); + else + std->qtd = NULL; /* so this std is re-added when the qset is */ + } + + pzl_qset_remove(whc, qset); + wurb->status = status; + wurb->is_async = false; + queue_work(whc->workqueue, &wurb->dequeue_work); + +out: + spin_unlock_irqrestore(&whc->lock, flags); + + return ret; +} + +/** + * pzl_qset_delete - delete a qset from the PZL + */ +void pzl_qset_delete(struct whc *whc, struct whc_qset *qset) +{ + qset->remove = 1; + queue_work(whc->workqueue, &whc->periodic_work); + qset_delete(whc, qset); +} + + +/** + * pzl_init - initialize the periodic zone list + * @whc: the WHCI host controller + */ +int pzl_init(struct whc *whc) +{ + int i; + + whc->pz_list = dma_alloc_coherent(&whc->umc->dev, sizeof(u64) * 16, + &whc->pz_list_dma, GFP_KERNEL); + if (whc->pz_list == NULL) + return -ENOMEM; + + /* Set T bit on all elements in PZL. */ + for (i = 0; i < 16; i++) + whc->pz_list[i] = cpu_to_le64(QH_LINK_NTDS(8) | QH_LINK_T); + + le_writeq(whc->pz_list_dma, whc->base + WUSBPERIODICLISTBASE); + + return 0; +} + +/** + * pzl_clean_up - free PZL resources + * @whc: the WHCI host controller + * + * The PZL is stopped and empty. + */ +void pzl_clean_up(struct whc *whc) +{ + if (whc->pz_list) + dma_free_coherent(&whc->umc->dev, sizeof(u64) * 16, whc->pz_list, + whc->pz_list_dma); +} diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c new file mode 100644 index 000000000000..0420037d2e18 --- /dev/null +++ b/drivers/usb/host/whci/qset.c @@ -0,0 +1,567 @@ +/* + * Wireless Host Controller (WHC) qset management. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> +#include <linux/dma-mapping.h> +#include <linux/uwb/umc.h> +#include <linux/usb.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +void dump_qset(struct whc_qset *qset, struct device *dev) +{ + struct whc_std *std; + struct urb *urb = NULL; + int i; + + dev_dbg(dev, "qset %08x\n", (u32)qset->qset_dma); + dev_dbg(dev, " -> %08x\n", (u32)qset->qh.link); + dev_dbg(dev, " info: %08x %08x %08x\n", + qset->qh.info1, qset->qh.info2, qset->qh.info3); + dev_dbg(dev, " sts: %04x errs: %d\n", qset->qh.status, qset->qh.err_count); + dev_dbg(dev, " TD: sts: %08x opts: %08x\n", + qset->qh.overlay.qtd.status, qset->qh.overlay.qtd.options); + + for (i = 0; i < WHCI_QSET_TD_MAX; i++) { + dev_dbg(dev, " %c%c TD[%d]: sts: %08x opts: %08x ptr: %08x\n", + i == qset->td_start ? 'S' : ' ', + i == qset->td_end ? 'E' : ' ', + i, qset->qtd[i].status, qset->qtd[i].options, + (u32)qset->qtd[i].page_list_ptr); + } + dev_dbg(dev, " ntds: %d\n", qset->ntds); + list_for_each_entry(std, &qset->stds, list_node) { + if (urb != std->urb) { + urb = std->urb; + dev_dbg(dev, " urb %p transferred: %d bytes\n", urb, + urb->actual_length); + } + if (std->qtd) + dev_dbg(dev, " sTD[%td]: %zu bytes @ %08x\n", + std->qtd - &qset->qtd[0], + std->len, std->num_pointers ? + (u32)(std->pl_virt[0].buf_ptr) : (u32)std->dma_addr); + else + dev_dbg(dev, " sTD[-]: %zd bytes @ %08x\n", + std->len, std->num_pointers ? + (u32)(std->pl_virt[0].buf_ptr) : (u32)std->dma_addr); + } +} + +struct whc_qset *qset_alloc(struct whc *whc, gfp_t mem_flags) +{ + struct whc_qset *qset; + dma_addr_t dma; + + qset = dma_pool_alloc(whc->qset_pool, mem_flags, &dma); + if (qset == NULL) + return NULL; + memset(qset, 0, sizeof(struct whc_qset)); + + qset->qset_dma = dma; + qset->whc = whc; + + INIT_LIST_HEAD(&qset->list_node); + INIT_LIST_HEAD(&qset->stds); + + return qset; +} + +/** + * qset_fill_qh - fill the static endpoint state in a qset's QHead + * @qset: the qset whose QH needs initializing with static endpoint + * state + * @urb: an urb for a transfer to this endpoint + */ +static void qset_fill_qh(struct whc_qset *qset, struct urb *urb) +{ + struct usb_device *usb_dev = urb->dev; + struct usb_wireless_ep_comp_descriptor *epcd; + bool is_out; + + is_out = usb_pipeout(urb->pipe); + + epcd = (struct usb_wireless_ep_comp_descriptor *)qset->ep->extra; + + if (epcd) { + qset->max_seq = epcd->bMaxSequence; + qset->max_burst = epcd->bMaxBurst; + } else { + qset->max_seq = 2; + qset->max_burst = 1; + } + + qset->qh.info1 = cpu_to_le32( + QH_INFO1_EP(usb_pipeendpoint(urb->pipe)) + | (is_out ? QH_INFO1_DIR_OUT : QH_INFO1_DIR_IN) + | usb_pipe_to_qh_type(urb->pipe) + | QH_INFO1_DEV_INFO_IDX(wusb_port_no_to_idx(usb_dev->portnum)) + | QH_INFO1_MAX_PKT_LEN(usb_maxpacket(urb->dev, urb->pipe, is_out)) + ); + qset->qh.info2 = cpu_to_le32( + QH_INFO2_BURST(qset->max_burst) + | QH_INFO2_DBP(0) + | QH_INFO2_MAX_COUNT(3) + | QH_INFO2_MAX_RETRY(3) + | QH_INFO2_MAX_SEQ(qset->max_seq - 1) + ); + /* FIXME: where can we obtain these Tx parameters from? Why + * doesn't the chip know what Tx power to use? It knows the Rx + * strength and can presumably guess the Tx power required + * from that? */ + qset->qh.info3 = cpu_to_le32( + QH_INFO3_TX_RATE_53_3 + | QH_INFO3_TX_PWR(0) /* 0 == max power */ + ); +} + +/** + * qset_clear - clear fields in a qset so it may be reinserted into a + * schedule + */ +void qset_clear(struct whc *whc, struct whc_qset *qset) +{ + qset->td_start = qset->td_end = qset->ntds = 0; + qset->remove = 0; + + qset->qh.link = cpu_to_le32(QH_LINK_NTDS(8) | QH_LINK_T); + qset->qh.status = cpu_to_le16(QH_STATUS_ICUR(qset->td_start)); + qset->qh.err_count = 0; + qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1); + qset->qh.scratch[0] = 0; + qset->qh.scratch[1] = 0; + qset->qh.scratch[2] = 0; + + memset(&qset->qh.overlay, 0, sizeof(qset->qh.overlay)); + + init_completion(&qset->remove_complete); +} + +/** + * get_qset - get the qset for an async endpoint + * + * A new qset is created if one does not already exist. + */ +struct whc_qset *get_qset(struct whc *whc, struct urb *urb, + gfp_t mem_flags) +{ + struct whc_qset *qset; + + qset = urb->ep->hcpriv; + if (qset == NULL) { + qset = qset_alloc(whc, mem_flags); + if (qset == NULL) + return NULL; + + qset->ep = urb->ep; + urb->ep->hcpriv = qset; + qset_fill_qh(qset, urb); + } + return qset; +} + +void qset_remove_complete(struct whc *whc, struct whc_qset *qset) +{ + list_del_init(&qset->list_node); + complete(&qset->remove_complete); +} + +/** + * qset_add_qtds - add qTDs for an URB to a qset + * + * Returns true if the list (ASL/PZL) must be updated because (for a + * WHCI 0.95 controller) an activated qTD was pointed to be iCur. + */ +enum whc_update qset_add_qtds(struct whc *whc, struct whc_qset *qset) +{ + struct whc_std *std; + enum whc_update update = 0; + + list_for_each_entry(std, &qset->stds, list_node) { + struct whc_qtd *qtd; + uint32_t status; + + if (qset->ntds >= WHCI_QSET_TD_MAX + || (qset->pause_after_urb && std->urb != qset->pause_after_urb)) + break; + + if (std->qtd) + continue; /* already has a qTD */ + + qtd = std->qtd = &qset->qtd[qset->td_end]; + + /* Fill in setup bytes for control transfers. */ + if (usb_pipecontrol(std->urb->pipe)) + memcpy(qtd->setup, std->urb->setup_packet, 8); + + status = QTD_STS_ACTIVE | QTD_STS_LEN(std->len); + + if (whc_std_last(std) && usb_pipeout(std->urb->pipe)) + status |= QTD_STS_LAST_PKT; + + /* + * For an IN transfer the iAlt field should be set so + * the h/w will automatically advance to the next + * transfer. However, if there are 8 or more TDs + * remaining in this transfer then iAlt cannot be set + * as it could point to somewhere in this transfer. + */ + if (std->ntds_remaining < WHCI_QSET_TD_MAX) { + int ialt; + ialt = (qset->td_end + std->ntds_remaining) % WHCI_QSET_TD_MAX; + status |= QTD_STS_IALT(ialt); + } else if (usb_pipein(std->urb->pipe)) + qset->pause_after_urb = std->urb; + + if (std->num_pointers) + qtd->options = cpu_to_le32(QTD_OPT_IOC); + else + qtd->options = cpu_to_le32(QTD_OPT_IOC | QTD_OPT_SMALL); + qtd->page_list_ptr = cpu_to_le64(std->dma_addr); + + qtd->status = cpu_to_le32(status); + + if (QH_STATUS_TO_ICUR(qset->qh.status) == qset->td_end) + update = WHC_UPDATE_UPDATED; + + if (++qset->td_end >= WHCI_QSET_TD_MAX) + qset->td_end = 0; + qset->ntds++; + } + + return update; +} + +/** + * qset_remove_qtd - remove the first qTD from a qset. + * + * The qTD might be still active (if it's part of a IN URB that + * resulted in a short read) so ensure it's deactivated. + */ +static void qset_remove_qtd(struct whc *whc, struct whc_qset *qset) +{ + qset->qtd[qset->td_start].status = 0; + + if (++qset->td_start >= WHCI_QSET_TD_MAX) + qset->td_start = 0; + qset->ntds--; +} + +/** + * qset_free_std - remove an sTD and free it. + * @whc: the WHCI host controller + * @std: the sTD to remove and free. + */ +void qset_free_std(struct whc *whc, struct whc_std *std) +{ + list_del(&std->list_node); + if (std->num_pointers) { + dma_unmap_single(whc->wusbhc.dev, std->dma_addr, + std->num_pointers * sizeof(struct whc_page_list_entry), + DMA_TO_DEVICE); + kfree(std->pl_virt); + } + + kfree(std); +} + +/** + * qset_remove_qtds - remove an URB's qTDs (and sTDs). + */ +static void qset_remove_qtds(struct whc *whc, struct whc_qset *qset, + struct urb *urb) +{ + struct whc_std *std, *t; + + list_for_each_entry_safe(std, t, &qset->stds, list_node) { + if (std->urb != urb) + break; + if (std->qtd != NULL) + qset_remove_qtd(whc, qset); + qset_free_std(whc, std); + } +} + +/** + * qset_free_stds - free any remaining sTDs for an URB. + */ +static void qset_free_stds(struct whc_qset *qset, struct urb *urb) +{ + struct whc_std *std, *t; + + list_for_each_entry_safe(std, t, &qset->stds, list_node) { + if (std->urb == urb) + qset_free_std(qset->whc, std); + } +} + +static int qset_fill_page_list(struct whc *whc, struct whc_std *std, gfp_t mem_flags) +{ + dma_addr_t dma_addr = std->dma_addr; + dma_addr_t sp, ep; + size_t std_len = std->len; + size_t pl_len; + int p; + + sp = ALIGN(dma_addr, WHCI_PAGE_SIZE); + ep = dma_addr + std_len; + std->num_pointers = DIV_ROUND_UP(ep - sp, WHCI_PAGE_SIZE); + + pl_len = std->num_pointers * sizeof(struct whc_page_list_entry); + std->pl_virt = kmalloc(pl_len, mem_flags); + if (std->pl_virt == NULL) + return -ENOMEM; + std->dma_addr = dma_map_single(whc->wusbhc.dev, std->pl_virt, pl_len, DMA_TO_DEVICE); + + for (p = 0; p < std->num_pointers; p++) { + std->pl_virt[p].buf_ptr = cpu_to_le64(dma_addr); + dma_addr = ALIGN(dma_addr + WHCI_PAGE_SIZE, WHCI_PAGE_SIZE); + } + + return 0; +} + +/** + * urb_dequeue_work - executes asl/pzl update and gives back the urb to the system. + */ +static void urb_dequeue_work(struct work_struct *work) +{ + struct whc_urb *wurb = container_of(work, struct whc_urb, dequeue_work); + struct whc_qset *qset = wurb->qset; + struct whc *whc = qset->whc; + unsigned long flags; + + if (wurb->is_async == true) + asl_update(whc, WUSBCMD_ASYNC_UPDATED + | WUSBCMD_ASYNC_SYNCED_DB + | WUSBCMD_ASYNC_QSET_RM); + else + pzl_update(whc, WUSBCMD_PERIODIC_UPDATED + | WUSBCMD_PERIODIC_SYNCED_DB + | WUSBCMD_PERIODIC_QSET_RM); + + spin_lock_irqsave(&whc->lock, flags); + qset_remove_urb(whc, qset, wurb->urb, wurb->status); + spin_unlock_irqrestore(&whc->lock, flags); +} + +/** + * qset_add_urb - add an urb to the qset's queue. + * + * The URB is chopped into sTDs, one for each qTD that will required. + * At least one qTD (and sTD) is required even if the transfer has no + * data (e.g., for some control transfers). + */ +int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb, + gfp_t mem_flags) +{ + struct whc_urb *wurb; + int remaining = urb->transfer_buffer_length; + u64 transfer_dma = urb->transfer_dma; + int ntds_remaining; + + ntds_remaining = DIV_ROUND_UP(remaining, QTD_MAX_XFER_SIZE); + if (ntds_remaining == 0) + ntds_remaining = 1; + + wurb = kzalloc(sizeof(struct whc_urb), mem_flags); + if (wurb == NULL) + goto err_no_mem; + urb->hcpriv = wurb; + wurb->qset = qset; + wurb->urb = urb; + INIT_WORK(&wurb->dequeue_work, urb_dequeue_work); + + while (ntds_remaining) { + struct whc_std *std; + size_t std_len; + + std = kmalloc(sizeof(struct whc_std), mem_flags); + if (std == NULL) + goto err_no_mem; + + std_len = remaining; + if (std_len > QTD_MAX_XFER_SIZE) + std_len = QTD_MAX_XFER_SIZE; + + std->urb = urb; + std->dma_addr = transfer_dma; + std->len = std_len; + std->ntds_remaining = ntds_remaining; + std->qtd = NULL; + + INIT_LIST_HEAD(&std->list_node); + list_add_tail(&std->list_node, &qset->stds); + + if (std_len > WHCI_PAGE_SIZE) { + if (qset_fill_page_list(whc, std, mem_flags) < 0) + goto err_no_mem; + } else + std->num_pointers = 0; + + ntds_remaining--; + remaining -= std_len; + transfer_dma += std_len; + } + + return 0; + +err_no_mem: + qset_free_stds(qset, urb); + return -ENOMEM; +} + +/** + * qset_remove_urb - remove an URB from the urb queue. + * + * The URB is returned to the USB subsystem. + */ +void qset_remove_urb(struct whc *whc, struct whc_qset *qset, + struct urb *urb, int status) +{ + struct wusbhc *wusbhc = &whc->wusbhc; + struct whc_urb *wurb = urb->hcpriv; + + usb_hcd_unlink_urb_from_ep(&wusbhc->usb_hcd, urb); + /* Drop the lock as urb->complete() may enqueue another urb. */ + spin_unlock(&whc->lock); + wusbhc_giveback_urb(wusbhc, urb, status); + spin_lock(&whc->lock); + + kfree(wurb); +} + +/** + * get_urb_status_from_qtd - get the completed urb status from qTD status + * @urb: completed urb + * @status: qTD status + */ +static int get_urb_status_from_qtd(struct urb *urb, u32 status) +{ + if (status & QTD_STS_HALTED) { + if (status & QTD_STS_DBE) + return usb_pipein(urb->pipe) ? -ENOSR : -ECOMM; + else if (status & QTD_STS_BABBLE) + return -EOVERFLOW; + else if (status & QTD_STS_RCE) + return -ETIME; + return -EPIPE; + } + if (usb_pipein(urb->pipe) + && (urb->transfer_flags & URB_SHORT_NOT_OK) + && urb->actual_length < urb->transfer_buffer_length) + return -EREMOTEIO; + return 0; +} + +/** + * process_inactive_qtd - process an inactive (but not halted) qTD. + * + * Update the urb with the transfer bytes from the qTD, if the urb is + * completely transfered or (in the case of an IN only) the LPF is + * set, then the transfer is complete and the urb should be returned + * to the system. + */ +void process_inactive_qtd(struct whc *whc, struct whc_qset *qset, + struct whc_qtd *qtd) +{ + struct whc_std *std = list_first_entry(&qset->stds, struct whc_std, list_node); + struct urb *urb = std->urb; + uint32_t status; + bool complete; + + status = le32_to_cpu(qtd->status); + + urb->actual_length += std->len - QTD_STS_TO_LEN(status); + + if (usb_pipein(urb->pipe) && (status & QTD_STS_LAST_PKT)) + complete = true; + else + complete = whc_std_last(std); + + qset_remove_qtd(whc, qset); + qset_free_std(whc, std); + + /* + * Transfers for this URB are complete? Then return it to the + * USB subsystem. + */ + if (complete) { + qset_remove_qtds(whc, qset, urb); + qset_remove_urb(whc, qset, urb, get_urb_status_from_qtd(urb, status)); + + /* + * If iAlt isn't valid then the hardware didn't + * advance iCur. Adjust the start and end pointers to + * match iCur. + */ + if (!(status & QTD_STS_IALT_VALID)) + qset->td_start = qset->td_end + = QH_STATUS_TO_ICUR(le16_to_cpu(qset->qh.status)); + qset->pause_after_urb = NULL; + } +} + +/** + * process_halted_qtd - process a qset with a halted qtd + * + * Remove all the qTDs for the failed URB and return the failed URB to + * the USB subsystem. Then remove all other qTDs so the qset can be + * removed. + * + * FIXME: this is the point where rate adaptation can be done. If a + * transfer failed because it exceeded the maximum number of retries + * then it could be reactivated with a slower rate without having to + * remove the qset. + */ +void process_halted_qtd(struct whc *whc, struct whc_qset *qset, + struct whc_qtd *qtd) +{ + struct whc_std *std = list_first_entry(&qset->stds, struct whc_std, list_node); + struct urb *urb = std->urb; + int urb_status; + + urb_status = get_urb_status_from_qtd(urb, le32_to_cpu(qtd->status)); + + qset_remove_qtds(whc, qset, urb); + qset_remove_urb(whc, qset, urb, urb_status); + + list_for_each_entry(std, &qset->stds, list_node) { + if (qset->ntds == 0) + break; + qset_remove_qtd(whc, qset); + std->qtd = NULL; + } + + qset->remove = 1; +} + +void qset_free(struct whc *whc, struct whc_qset *qset) +{ + dma_pool_free(whc->qset_pool, qset, qset->qset_dma); +} + +/** + * qset_delete - wait for a qset to be unused, then free it. + */ +void qset_delete(struct whc *whc, struct whc_qset *qset) +{ + wait_for_completion(&qset->remove_complete); + qset_free(whc, qset); +} diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h new file mode 100644 index 000000000000..1d2a53bd39fd --- /dev/null +++ b/drivers/usb/host/whci/whcd.h @@ -0,0 +1,197 @@ +/* + * Wireless Host Controller (WHC) private header. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#ifndef __WHCD_H +#define __WHCD_H + +#include <linux/uwb/whci.h> +#include <linux/workqueue.h> + +#include "whci-hc.h" + +/* Generic command timeout. */ +#define WHC_GENCMD_TIMEOUT_MS 100 + + +struct whc { + struct wusbhc wusbhc; + struct umc_dev *umc; + + resource_size_t base_phys; + void __iomem *base; + int irq; + + u8 n_devices; + u8 n_keys; + u8 n_mmc_ies; + + u64 *pz_list; + struct dn_buf_entry *dn_buf; + struct di_buf_entry *di_buf; + dma_addr_t pz_list_dma; + dma_addr_t dn_buf_dma; + dma_addr_t di_buf_dma; + + spinlock_t lock; + struct mutex mutex; + + void * gen_cmd_buf; + dma_addr_t gen_cmd_buf_dma; + wait_queue_head_t cmd_wq; + + struct workqueue_struct *workqueue; + struct work_struct dn_work; + + struct dma_pool *qset_pool; + + struct list_head async_list; + struct list_head async_removed_list; + wait_queue_head_t async_list_wq; + struct work_struct async_work; + + struct list_head periodic_list[5]; + struct list_head periodic_removed_list; + wait_queue_head_t periodic_list_wq; + struct work_struct periodic_work; +}; + +#define wusbhc_to_whc(w) (container_of((w), struct whc, wusbhc)) + +/** + * struct whc_std - a software TD. + * @urb: the URB this sTD is for. + * @offset: start of the URB's data for this TD. + * @len: the length of data in the associated TD. + * @ntds_remaining: number of TDs (starting from this one) in this transfer. + * + * Queued URBs may require more TDs than are available in a qset so we + * use a list of these "software TDs" (sTDs) to hold per-TD data. + */ +struct whc_std { + struct urb *urb; + size_t len; + int ntds_remaining; + struct whc_qtd *qtd; + + struct list_head list_node; + int num_pointers; + dma_addr_t dma_addr; + struct whc_page_list_entry *pl_virt; +}; + +/** + * struct whc_urb - per URB host controller structure. + * @urb: the URB this struct is for. + * @qset: the qset associated to the URB. + * @dequeue_work: the work to remove the URB when dequeued. + * @is_async: the URB belongs to async sheduler or not. + * @status: the status to be returned when calling wusbhc_giveback_urb. + */ +struct whc_urb { + struct urb *urb; + struct whc_qset *qset; + struct work_struct dequeue_work; + bool is_async; + int status; +}; + +/** + * whc_std_last - is this sTD the URB's last? + * @std: the sTD to check. + */ +static inline bool whc_std_last(struct whc_std *std) +{ + return std->ntds_remaining <= 1; +} + +enum whc_update { + WHC_UPDATE_ADDED = 0x01, + WHC_UPDATE_REMOVED = 0x02, + WHC_UPDATE_UPDATED = 0x04, +}; + +/* init.c */ +int whc_init(struct whc *whc); +void whc_clean_up(struct whc *whc); + +/* hw.c */ +void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val); +int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len); + +/* wusb.c */ +int whc_wusbhc_start(struct wusbhc *wusbhc); +void whc_wusbhc_stop(struct wusbhc *wusbhc); +int whc_mmcie_add(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt, + u8 handle, struct wuie_hdr *wuie); +int whc_mmcie_rm(struct wusbhc *wusbhc, u8 handle); +int whc_bwa_set(struct wusbhc *wusbhc, s8 stream_index, const struct uwb_mas_bm *mas_bm); +int whc_dev_info_set(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev); +int whc_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots); +int whc_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, + const void *ptk, size_t key_size); +int whc_set_gtk(struct wusbhc *wusbhc, u32 tkid, + const void *gtk, size_t key_size); +int whc_set_cluster_id(struct whc *whc, u8 bcid); + +/* int.c */ +irqreturn_t whc_int_handler(struct usb_hcd *hcd); +void whc_dn_work(struct work_struct *work); + +/* asl.c */ +void asl_start(struct whc *whc); +void asl_stop(struct whc *whc); +int asl_init(struct whc *whc); +void asl_clean_up(struct whc *whc); +int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags); +int asl_urb_dequeue(struct whc *whc, struct urb *urb, int status); +void asl_qset_delete(struct whc *whc, struct whc_qset *qset); +void scan_async_work(struct work_struct *work); + +/* pzl.c */ +int pzl_init(struct whc *whc); +void pzl_clean_up(struct whc *whc); +void pzl_start(struct whc *whc); +void pzl_stop(struct whc *whc); +int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags); +int pzl_urb_dequeue(struct whc *whc, struct urb *urb, int status); +void pzl_qset_delete(struct whc *whc, struct whc_qset *qset); +void scan_periodic_work(struct work_struct *work); + +/* qset.c */ +struct whc_qset *qset_alloc(struct whc *whc, gfp_t mem_flags); +void qset_free(struct whc *whc, struct whc_qset *qset); +struct whc_qset *get_qset(struct whc *whc, struct urb *urb, gfp_t mem_flags); +void qset_delete(struct whc *whc, struct whc_qset *qset); +void qset_clear(struct whc *whc, struct whc_qset *qset); +int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb, + gfp_t mem_flags); +void qset_free_std(struct whc *whc, struct whc_std *std); +void qset_remove_urb(struct whc *whc, struct whc_qset *qset, + struct urb *urb, int status); +void process_halted_qtd(struct whc *whc, struct whc_qset *qset, + struct whc_qtd *qtd); +void process_inactive_qtd(struct whc *whc, struct whc_qset *qset, + struct whc_qtd *qtd); +enum whc_update qset_add_qtds(struct whc *whc, struct whc_qset *qset); +void qset_remove_complete(struct whc *whc, struct whc_qset *qset); +void dump_qset(struct whc_qset *qset, struct device *dev); +void pzl_update(struct whc *whc, uint32_t wusbcmd); +void asl_update(struct whc *whc, uint32_t wusbcmd); + +#endif /* #ifndef __WHCD_H */ diff --git a/drivers/usb/host/whci/whci-hc.h b/drivers/usb/host/whci/whci-hc.h new file mode 100644 index 000000000000..bff1eb7a35cf --- /dev/null +++ b/drivers/usb/host/whci/whci-hc.h @@ -0,0 +1,416 @@ +/* + * Wireless Host Controller (WHC) data structures. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + */ +#ifndef _WHCI_WHCI_HC_H +#define _WHCI_WHCI_HC_H + +#include <linux/list.h> + +/** + * WHCI_PAGE_SIZE - page size use by WHCI + * + * WHCI assumes that host system uses pages of 4096 octets. + */ +#define WHCI_PAGE_SIZE 4096 + + +/** + * QTD_MAX_TXFER_SIZE - max number of bytes to transfer with a single + * qtd. + * + * This is 2^20 - 1. + */ +#define QTD_MAX_XFER_SIZE 1048575 + + +/** + * struct whc_qtd - Queue Element Transfer Descriptors (qTD) + * + * This describes the data for a bulk, control or interrupt transfer. + * + * [WHCI] section 3.2.4 + */ +struct whc_qtd { + __le32 status; /*< remaining transfer len and transfer status */ + __le32 options; + __le64 page_list_ptr; /*< physical pointer to data buffer page list*/ + __u8 setup[8]; /*< setup data for control transfers */ +} __attribute__((packed)); + +#define QTD_STS_ACTIVE (1 << 31) /* enable execution of transaction */ +#define QTD_STS_HALTED (1 << 30) /* transfer halted */ +#define QTD_STS_DBE (1 << 29) /* data buffer error */ +#define QTD_STS_BABBLE (1 << 28) /* babble detected */ +#define QTD_STS_RCE (1 << 27) /* retry count exceeded */ +#define QTD_STS_LAST_PKT (1 << 26) /* set Last Packet Flag in WUSB header */ +#define QTD_STS_INACTIVE (1 << 25) /* queue set is marked inactive */ +#define QTD_STS_IALT_VALID (1 << 23) /* iAlt field is valid */ +#define QTD_STS_IALT(i) (QTD_STS_IALT_VALID | ((i) << 20)) /* iAlt field */ +#define QTD_STS_LEN(l) ((l) << 0) /* transfer length */ +#define QTD_STS_TO_LEN(s) ((s) & 0x000fffff) + +#define QTD_OPT_IOC (1 << 1) /* page_list_ptr points to buffer directly */ +#define QTD_OPT_SMALL (1 << 0) /* interrupt on complete */ + +/** + * struct whc_itd - Isochronous Queue Element Transfer Descriptors (iTD) + * + * This describes the data and other parameters for an isochronous + * transfer. + * + * [WHCI] section 3.2.5 + */ +struct whc_itd { + __le16 presentation_time; /*< presentation time for OUT transfers */ + __u8 num_segments; /*< number of data segments in segment list */ + __u8 status; /*< command execution status */ + __le32 options; /*< misc transfer options */ + __le64 page_list_ptr; /*< physical pointer to data buffer page list */ + __le64 seg_list_ptr; /*< physical pointer to segment list */ +} __attribute__((packed)); + +#define ITD_STS_ACTIVE (1 << 7) /* enable execution of transaction */ +#define ITD_STS_DBE (1 << 5) /* data buffer error */ +#define ITD_STS_BABBLE (1 << 4) /* babble detected */ +#define ITD_STS_INACTIVE (1 << 1) /* queue set is marked inactive */ + +#define ITD_OPT_IOC (1 << 1) /* interrupt on complete */ +#define ITD_OPT_SMALL (1 << 0) /* page_list_ptr points to buffer directly */ + +/** + * Page list entry. + * + * A TD's page list must contain sufficient page list entries for the + * total data length in the TD. + * + * [WHCI] section 3.2.4.3 + */ +struct whc_page_list_entry { + __le64 buf_ptr; /*< physical pointer to buffer */ +} __attribute__((packed)); + +/** + * struct whc_seg_list_entry - Segment list entry. + * + * Describes a portion of the data buffer described in the containing + * qTD's page list. + * + * seg_ptr = qtd->page_list_ptr[qtd->seg_list_ptr[seg].idx].buf_ptr + * + qtd->seg_list_ptr[seg].offset; + * + * Segments can't cross page boundries. + * + * [WHCI] section 3.2.5.5 + */ +struct whc_seg_list_entry { + __le16 len; /*< segment length */ + __u8 idx; /*< index into page list */ + __u8 status; /*< segment status */ + __le16 offset; /*< 12 bit offset into page */ +} __attribute__((packed)); + +/** + * struct whc_qhead - endpoint and status information for a qset. + * + * [WHCI] section 3.2.6 + */ +struct whc_qhead { + __le64 link; /*< next qset in list */ + __le32 info1; + __le32 info2; + __le32 info3; + __le16 status; + __le16 err_count; /*< transaction error count */ + __le32 cur_window; + __le32 scratch[3]; /*< h/w scratch area */ + union { + struct whc_qtd qtd; + struct whc_itd itd; + } overlay; +} __attribute__((packed)); + +#define QH_LINK_PTR_MASK (~0x03Full) +#define QH_LINK_PTR(ptr) ((ptr) & QH_LINK_PTR_MASK) +#define QH_LINK_IQS (1 << 4) /* isochronous queue set */ +#define QH_LINK_NTDS(n) (((n) - 1) << 1) /* number of TDs in queue set */ +#define QH_LINK_T (1 << 0) /* last queue set in periodic schedule list */ + +#define QH_INFO1_EP(e) ((e) << 0) /* endpoint number */ +#define QH_INFO1_DIR_IN (1 << 4) /* IN transfer */ +#define QH_INFO1_DIR_OUT (0 << 4) /* OUT transfer */ +#define QH_INFO1_TR_TYPE_CTRL (0x0 << 5) /* control transfer */ +#define QH_INFO1_TR_TYPE_ISOC (0x1 << 5) /* isochronous transfer */ +#define QH_INFO1_TR_TYPE_BULK (0x2 << 5) /* bulk transfer */ +#define QH_INFO1_TR_TYPE_INT (0x3 << 5) /* interrupt */ +#define QH_INFO1_TR_TYPE_LP_INT (0x7 << 5) /* low power interrupt */ +#define QH_INFO1_DEV_INFO_IDX(i) ((i) << 8) /* index into device info buffer */ +#define QH_INFO1_SET_INACTIVE (1 << 15) /* set inactive after transfer */ +#define QH_INFO1_MAX_PKT_LEN(l) ((l) << 16) /* maximum packet length */ + +#define QH_INFO2_BURST(b) ((b) << 0) /* maximum burst length */ +#define QH_INFO2_DBP(p) ((p) << 5) /* data burst policy (see [WUSB] table 5-7) */ +#define QH_INFO2_MAX_COUNT(c) ((c) << 8) /* max isoc/int pkts per zone */ +#define QH_INFO2_RQS (1 << 15) /* reactivate queue set */ +#define QH_INFO2_MAX_RETRY(r) ((r) << 16) /* maximum transaction retries */ +#define QH_INFO2_MAX_SEQ(s) ((s) << 20) /* maximum sequence number */ +#define QH_INFO3_MAX_DELAY(d) ((d) << 0) /* maximum stream delay in 125 us units (isoc only) */ +#define QH_INFO3_INTERVAL(i) ((i) << 16) /* segment interval in 125 us units (isoc only) */ + +#define QH_INFO3_TX_RATE_53_3 (0 << 24) +#define QH_INFO3_TX_RATE_80 (1 << 24) +#define QH_INFO3_TX_RATE_106_7 (2 << 24) +#define QH_INFO3_TX_RATE_160 (3 << 24) +#define QH_INFO3_TX_RATE_200 (4 << 24) +#define QH_INFO3_TX_RATE_320 (5 << 24) +#define QH_INFO3_TX_RATE_400 (6 << 24) +#define QH_INFO3_TX_RATE_480 (7 << 24) +#define QH_INFO3_TX_PWR(p) ((p) << 29) /* transmit power (see [WUSB] section 5.2.1.2) */ + +#define QH_STATUS_FLOW_CTRL (1 << 15) +#define QH_STATUS_ICUR(i) ((i) << 5) +#define QH_STATUS_TO_ICUR(s) (((s) >> 5) & 0x7) + +/** + * usb_pipe_to_qh_type - USB core pipe type to QH transfer type + * + * Returns the QH type field for a USB core pipe type. + */ +static inline unsigned usb_pipe_to_qh_type(unsigned pipe) +{ + static const unsigned type[] = { + [PIPE_ISOCHRONOUS] = QH_INFO1_TR_TYPE_ISOC, + [PIPE_INTERRUPT] = QH_INFO1_TR_TYPE_INT, + [PIPE_CONTROL] = QH_INFO1_TR_TYPE_CTRL, + [PIPE_BULK] = QH_INFO1_TR_TYPE_BULK, + }; + return type[usb_pipetype(pipe)]; +} + +/** + * Maxiumum number of TDs in a qset. + */ +#define WHCI_QSET_TD_MAX 8 + +/** + * struct whc_qset - WUSB data transfers to a specific endpoint + * @qh: the QHead of this qset + * @qtd: up to 8 qTDs (for qsets for control, bulk and interrupt + * transfers) + * @itd: up to 8 iTDs (for qsets for isochronous transfers) + * @qset_dma: DMA address for this qset + * @whc: WHCI HC this qset is for + * @ep: endpoint + * @stds: list of sTDs queued to this qset + * @ntds: number of qTDs queued (not necessarily the same as nTDs + * field in the QH) + * @td_start: index of the first qTD in the list + * @td_end: index of next free qTD in the list (provided + * ntds < WHCI_QSET_TD_MAX) + * + * Queue Sets (qsets) are added to the asynchronous schedule list + * (ASL) or the periodic zone list (PZL). + * + * qsets may contain up to 8 TDs (either qTDs or iTDs as appropriate). + * Each TD may refer to at most 1 MiB of data. If a single transfer + * has > 8MiB of data, TDs can be reused as they are completed since + * the TD list is used as a circular buffer. Similarly, several + * (smaller) transfers may be queued in a qset. + * + * WHCI controllers may cache portions of the qsets in the ASL and + * PZL, requiring the WHCD to inform the WHC that the lists have been + * updated (fields changed or qsets inserted or removed). For safe + * insertion and removal of qsets from the lists the schedule must be + * stopped to avoid races in updating the QH link pointers. + * + * Since the HC is free to execute qsets in any order, all transfers + * to an endpoint should use the same qset to ensure transfers are + * executed in the order they're submitted. + * + * [WHCI] section 3.2.3 + */ +struct whc_qset { + struct whc_qhead qh; + union { + struct whc_qtd qtd[WHCI_QSET_TD_MAX]; + struct whc_itd itd[WHCI_QSET_TD_MAX]; + }; + + /* private data for WHCD */ + dma_addr_t qset_dma; + struct whc *whc; + struct usb_host_endpoint *ep; + struct list_head stds; + int ntds; + int td_start; + int td_end; + struct list_head list_node; + unsigned in_sw_list:1; + unsigned in_hw_list:1; + unsigned remove:1; + struct urb *pause_after_urb; + struct completion remove_complete; + int max_burst; + int max_seq; +}; + +static inline void whc_qset_set_link_ptr(u64 *ptr, u64 target) +{ + if (target) + *ptr = (*ptr & ~(QH_LINK_PTR_MASK | QH_LINK_T)) | QH_LINK_PTR(target); + else + *ptr = QH_LINK_T; +} + +/** + * struct di_buf_entry - Device Information (DI) buffer entry. + * + * There's one of these per connected device. + */ +struct di_buf_entry { + __le32 availability_info[8]; /*< MAS availability information, one MAS per bit */ + __le32 addr_sec_info; /*< addressing and security info */ + __le32 reserved[7]; +} __attribute__((packed)); + +#define WHC_DI_SECURE (1 << 31) +#define WHC_DI_DISABLE (1 << 30) +#define WHC_DI_KEY_IDX(k) ((k) << 8) +#define WHC_DI_KEY_IDX_MASK 0x0000ff00 +#define WHC_DI_DEV_ADDR(a) ((a) << 0) +#define WHC_DI_DEV_ADDR_MASK 0x000000ff + +/** + * struct dn_buf_entry - Device Notification (DN) buffer entry. + * + * [WHCI] section 3.2.8 + */ +struct dn_buf_entry { + __u8 msg_size; /*< number of octets of valid DN data */ + __u8 reserved1; + __u8 src_addr; /*< source address */ + __u8 status; /*< buffer entry status */ + __le32 tkid; /*< TKID for source device, valid if secure bit is set */ + __u8 dn_data[56]; /*< up to 56 octets of DN data */ +} __attribute__((packed)); + +#define WHC_DN_STATUS_VALID (1 << 7) /* buffer entry is valid */ +#define WHC_DN_STATUS_SECURE (1 << 6) /* notification received using secure frame */ + +#define WHC_N_DN_ENTRIES (4096 / sizeof(struct dn_buf_entry)) + +/* The Add MMC IE WUSB Generic Command may take up to 256 bytes of + data. [WHCI] section 2.4.7. */ +#define WHC_GEN_CMD_DATA_LEN 256 + +/* + * HC registers. + * + * [WHCI] section 2.4 + */ + +#define WHCIVERSION 0x00 + +#define WHCSPARAMS 0x04 +# define WHCSPARAMS_TO_N_MMC_IES(p) (((p) >> 16) & 0xff) +# define WHCSPARAMS_TO_N_KEYS(p) (((p) >> 8) & 0xff) +# define WHCSPARAMS_TO_N_DEVICES(p) (((p) >> 0) & 0x7f) + +#define WUSBCMD 0x08 +# define WUSBCMD_BCID(b) ((b) << 16) +# define WUSBCMD_BCID_MASK (0xff << 16) +# define WUSBCMD_ASYNC_QSET_RM (1 << 12) +# define WUSBCMD_PERIODIC_QSET_RM (1 << 11) +# define WUSBCMD_WUSBSI(s) ((s) << 8) +# define WUSBCMD_WUSBSI_MASK (0x7 << 8) +# define WUSBCMD_ASYNC_SYNCED_DB (1 << 7) +# define WUSBCMD_PERIODIC_SYNCED_DB (1 << 6) +# define WUSBCMD_ASYNC_UPDATED (1 << 5) +# define WUSBCMD_PERIODIC_UPDATED (1 << 4) +# define WUSBCMD_ASYNC_EN (1 << 3) +# define WUSBCMD_PERIODIC_EN (1 << 2) +# define WUSBCMD_WHCRESET (1 << 1) +# define WUSBCMD_RUN (1 << 0) + +#define WUSBSTS 0x0c +# define WUSBSTS_ASYNC_SCHED (1 << 15) +# define WUSBSTS_PERIODIC_SCHED (1 << 14) +# define WUSBSTS_DNTS_SCHED (1 << 13) +# define WUSBSTS_HCHALTED (1 << 12) +# define WUSBSTS_GEN_CMD_DONE (1 << 9) +# define WUSBSTS_CHAN_TIME_ROLLOVER (1 << 8) +# define WUSBSTS_DNTS_OVERFLOW (1 << 7) +# define WUSBSTS_BPST_ADJUSTMENT_CHANGED (1 << 6) +# define WUSBSTS_HOST_ERR (1 << 5) +# define WUSBSTS_ASYNC_SCHED_SYNCED (1 << 4) +# define WUSBSTS_PERIODIC_SCHED_SYNCED (1 << 3) +# define WUSBSTS_DNTS_INT (1 << 2) +# define WUSBSTS_ERR_INT (1 << 1) +# define WUSBSTS_INT (1 << 0) +# define WUSBSTS_INT_MASK 0x3ff + +#define WUSBINTR 0x10 +# define WUSBINTR_GEN_CMD_DONE (1 << 9) +# define WUSBINTR_CHAN_TIME_ROLLOVER (1 << 8) +# define WUSBINTR_DNTS_OVERFLOW (1 << 7) +# define WUSBINTR_BPST_ADJUSTMENT_CHANGED (1 << 6) +# define WUSBINTR_HOST_ERR (1 << 5) +# define WUSBINTR_ASYNC_SCHED_SYNCED (1 << 4) +# define WUSBINTR_PERIODIC_SCHED_SYNCED (1 << 3) +# define WUSBINTR_DNTS_INT (1 << 2) +# define WUSBINTR_ERR_INT (1 << 1) +# define WUSBINTR_INT (1 << 0) +# define WUSBINTR_ALL 0x3ff + +#define WUSBGENCMDSTS 0x14 +# define WUSBGENCMDSTS_ACTIVE (1 << 31) +# define WUSBGENCMDSTS_ERROR (1 << 24) +# define WUSBGENCMDSTS_IOC (1 << 23) +# define WUSBGENCMDSTS_MMCIE_ADD 0x01 +# define WUSBGENCMDSTS_MMCIE_RM 0x02 +# define WUSBGENCMDSTS_SET_MAS 0x03 +# define WUSBGENCMDSTS_CHAN_STOP 0x04 +# define WUSBGENCMDSTS_RWP_EN 0x05 + +#define WUSBGENCMDPARAMS 0x18 +#define WUSBGENADDR 0x20 +#define WUSBASYNCLISTADDR 0x28 +#define WUSBDNTSBUFADDR 0x30 +#define WUSBDEVICEINFOADDR 0x38 + +#define WUSBSETSECKEYCMD 0x40 +# define WUSBSETSECKEYCMD_SET (1 << 31) +# define WUSBSETSECKEYCMD_ERASE (1 << 30) +# define WUSBSETSECKEYCMD_GTK (1 << 8) +# define WUSBSETSECKEYCMD_IDX(i) ((i) << 0) + +#define WUSBTKID 0x44 +#define WUSBSECKEY 0x48 +#define WUSBPERIODICLISTBASE 0x58 +#define WUSBMASINDEX 0x60 + +#define WUSBDNTSCTRL 0x64 +# define WUSBDNTSCTRL_ACTIVE (1 << 31) +# define WUSBDNTSCTRL_INTERVAL(i) ((i) << 8) +# define WUSBDNTSCTRL_SLOTS(s) ((s) << 0) + +#define WUSBTIME 0x68 +#define WUSBBPST 0x6c +#define WUSBDIBUPDATED 0x70 + +#endif /* #ifndef _WHCI_WHCI_HC_H */ diff --git a/drivers/usb/host/whci/wusb.c b/drivers/usb/host/whci/wusb.c new file mode 100644 index 000000000000..66e4ddcd961d --- /dev/null +++ b/drivers/usb/host/whci/wusb.c @@ -0,0 +1,241 @@ +/* + * Wireless Host Controller (WHC) WUSB operations. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/uwb/umc.h> +#define D_LOCAL 1 +#include <linux/uwb/debug.h> + +#include "../../wusbcore/wusbhc.h" + +#include "whcd.h" + +#if D_LOCAL >= 1 +static void dump_di(struct whc *whc, int idx) +{ + struct di_buf_entry *di = &whc->di_buf[idx]; + struct device *dev = &whc->umc->dev; + char buf[128]; + + bitmap_scnprintf(buf, sizeof(buf), (unsigned long *)di->availability_info, UWB_NUM_MAS); + + d_printf(1, dev, "DI[%d]\n", idx); + d_printf(1, dev, " availability: %s\n", buf); + d_printf(1, dev, " %c%c key idx: %d dev addr: %d\n", + (di->addr_sec_info & WHC_DI_SECURE) ? 'S' : ' ', + (di->addr_sec_info & WHC_DI_DISABLE) ? 'D' : ' ', + (di->addr_sec_info & WHC_DI_KEY_IDX_MASK) >> 8, + (di->addr_sec_info & WHC_DI_DEV_ADDR_MASK)); +} +#else +static inline void dump_di(struct whc *whc, int idx) +{ +} +#endif + +static int whc_update_di(struct whc *whc, int idx) +{ + int offset = idx / 32; + u32 bit = 1 << (idx % 32); + + dump_di(whc, idx); + + le_writel(bit, whc->base + WUSBDIBUPDATED + offset); + + return whci_wait_for(&whc->umc->dev, + whc->base + WUSBDIBUPDATED + offset, bit, 0, + 100, "DI update"); +} + +/* + * WHCI starts and stops MMCs based on there being a valid GTK so + * these need only start/stop the asynchronous and periodic schedules. + */ + +int whc_wusbhc_start(struct wusbhc *wusbhc) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + + asl_start(whc); + pzl_start(whc); + + return 0; +} + +void whc_wusbhc_stop(struct wusbhc *wusbhc) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + + pzl_stop(whc); + asl_stop(whc); +} + +int whc_mmcie_add(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt, + u8 handle, struct wuie_hdr *wuie) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + u32 params; + + params = (interval << 24) + | (repeat_cnt << 16) + | (wuie->bLength << 8) + | handle; + + return whc_do_gencmd(whc, WUSBGENCMDSTS_MMCIE_ADD, params, wuie, wuie->bLength); +} + +int whc_mmcie_rm(struct wusbhc *wusbhc, u8 handle) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + u32 params; + + params = handle; + + return whc_do_gencmd(whc, WUSBGENCMDSTS_MMCIE_RM, params, NULL, 0); +} + +int whc_bwa_set(struct wusbhc *wusbhc, s8 stream_index, const struct uwb_mas_bm *mas_bm) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + + if (stream_index >= 0) + whc_write_wusbcmd(whc, WUSBCMD_WUSBSI_MASK, WUSBCMD_WUSBSI(stream_index)); + + return whc_do_gencmd(whc, WUSBGENCMDSTS_SET_MAS, 0, (void *)mas_bm, sizeof(*mas_bm)); +} + +int whc_dev_info_set(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + int idx = wusb_dev->port_idx; + struct di_buf_entry *di = &whc->di_buf[idx]; + int ret; + + mutex_lock(&whc->mutex); + + uwb_mas_bm_copy_le(di->availability_info, &wusb_dev->availability); + di->addr_sec_info &= ~(WHC_DI_DISABLE | WHC_DI_DEV_ADDR_MASK); + di->addr_sec_info |= WHC_DI_DEV_ADDR(wusb_dev->addr); + + ret = whc_update_di(whc, idx); + + mutex_unlock(&whc->mutex); + + return ret; +} + +/* + * Set the number of Device Notification Time Slots (DNTS) and enable + * device notifications. + */ +int whc_set_num_dnts(struct wusbhc *wusbhc, u8 interval, u8 slots) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + u32 dntsctrl; + + dntsctrl = WUSBDNTSCTRL_ACTIVE + | WUSBDNTSCTRL_INTERVAL(interval) + | WUSBDNTSCTRL_SLOTS(slots); + + le_writel(dntsctrl, whc->base + WUSBDNTSCTRL); + + return 0; +} + +static int whc_set_key(struct whc *whc, u8 key_index, uint32_t tkid, + const void *key, size_t key_size, bool is_gtk) +{ + uint32_t setkeycmd; + uint32_t seckey[4]; + int i; + int ret; + + memcpy(seckey, key, key_size); + setkeycmd = WUSBSETSECKEYCMD_SET | WUSBSETSECKEYCMD_IDX(key_index); + if (is_gtk) + setkeycmd |= WUSBSETSECKEYCMD_GTK; + + le_writel(tkid, whc->base + WUSBTKID); + for (i = 0; i < 4; i++) + le_writel(seckey[i], whc->base + WUSBSECKEY + 4*i); + le_writel(setkeycmd, whc->base + WUSBSETSECKEYCMD); + + ret = whci_wait_for(&whc->umc->dev, whc->base + WUSBSETSECKEYCMD, + WUSBSETSECKEYCMD_SET, 0, 100, "set key"); + + return ret; +} + +/** + * whc_set_ptk - set the PTK to use for a device. + * + * The index into the key table for this PTK is the same as the + * device's port index. + */ +int whc_set_ptk(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, + const void *ptk, size_t key_size) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + struct di_buf_entry *di = &whc->di_buf[port_idx]; + int ret; + + mutex_lock(&whc->mutex); + + if (ptk) { + ret = whc_set_key(whc, port_idx, tkid, ptk, key_size, false); + if (ret) + goto out; + + di->addr_sec_info &= ~WHC_DI_KEY_IDX_MASK; + di->addr_sec_info |= WHC_DI_SECURE | WHC_DI_KEY_IDX(port_idx); + } else + di->addr_sec_info &= ~WHC_DI_SECURE; + + ret = whc_update_di(whc, port_idx); +out: + mutex_unlock(&whc->mutex); + return ret; +} + +/** + * whc_set_gtk - set the GTK for subsequent broadcast packets + * + * The GTK is stored in the last entry in the key table (the previous + * N_DEVICES entries are for the per-device PTKs). + */ +int whc_set_gtk(struct wusbhc *wusbhc, u32 tkid, + const void *gtk, size_t key_size) +{ + struct whc *whc = wusbhc_to_whc(wusbhc); + int ret; + + mutex_lock(&whc->mutex); + + ret = whc_set_key(whc, whc->n_devices, tkid, gtk, key_size, true); + + mutex_unlock(&whc->mutex); + + return ret; +} + +int whc_set_cluster_id(struct whc *whc, u8 bcid) +{ + whc_write_wusbcmd(whc, WUSBCMD_BCID_MASK, WUSBCMD_BCID(bcid)); + return 0; +} diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c index b358c4e1cf21..444c69c447be 100644 --- a/drivers/usb/misc/usbtest.c +++ b/drivers/usb/misc/usbtest.c @@ -1561,8 +1561,7 @@ usbtest_ioctl (struct usb_interface *intf, unsigned int code, void *buf) if (code != USBTEST_REQUEST) return -EOPNOTSUPP; - if (param->iterations <= 0 || param->length < 0 - || param->sglen < 0 || param->vary < 0) + if (param->iterations <= 0) return -EINVAL; if (mutex_lock_interruptible(&dev->lock)) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 3d87eabcd922..bd07eaa300b9 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -95,11 +95,20 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define HUAWEI_PRODUCT_E220 0x1003 #define HUAWEI_PRODUCT_E220BIS 0x1004 #define HUAWEI_PRODUCT_E1401 0x1401 +#define HUAWEI_PRODUCT_E1402 0x1402 #define HUAWEI_PRODUCT_E1403 0x1403 +#define HUAWEI_PRODUCT_E1404 0x1404 #define HUAWEI_PRODUCT_E1405 0x1405 #define HUAWEI_PRODUCT_E1406 0x1406 +#define HUAWEI_PRODUCT_E1407 0x1407 #define HUAWEI_PRODUCT_E1408 0x1408 #define HUAWEI_PRODUCT_E1409 0x1409 +#define HUAWEI_PRODUCT_E140A 0x140A +#define HUAWEI_PRODUCT_E140B 0x140B +#define HUAWEI_PRODUCT_E140C 0x140C +#define HUAWEI_PRODUCT_E140D 0x140D +#define HUAWEI_PRODUCT_E140E 0x140E +#define HUAWEI_PRODUCT_E140F 0x140F #define HUAWEI_PRODUCT_E1410 0x1410 #define HUAWEI_PRODUCT_E1411 0x1411 #define HUAWEI_PRODUCT_E1412 0x1412 @@ -110,6 +119,44 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define HUAWEI_PRODUCT_E1417 0x1417 #define HUAWEI_PRODUCT_E1418 0x1418 #define HUAWEI_PRODUCT_E1419 0x1419 +#define HUAWEI_PRODUCT_E141A 0x141A +#define HUAWEI_PRODUCT_E141B 0x141B +#define HUAWEI_PRODUCT_E141C 0x141C +#define HUAWEI_PRODUCT_E141D 0x141D +#define HUAWEI_PRODUCT_E141E 0x141E +#define HUAWEI_PRODUCT_E141F 0x141F +#define HUAWEI_PRODUCT_E1420 0x1420 +#define HUAWEI_PRODUCT_E1421 0x1421 +#define HUAWEI_PRODUCT_E1422 0x1422 +#define HUAWEI_PRODUCT_E1423 0x1423 +#define HUAWEI_PRODUCT_E1424 0x1424 +#define HUAWEI_PRODUCT_E1425 0x1425 +#define HUAWEI_PRODUCT_E1426 0x1426 +#define HUAWEI_PRODUCT_E1427 0x1427 +#define HUAWEI_PRODUCT_E1428 0x1428 +#define HUAWEI_PRODUCT_E1429 0x1429 +#define HUAWEI_PRODUCT_E142A 0x142A +#define HUAWEI_PRODUCT_E142B 0x142B +#define HUAWEI_PRODUCT_E142C 0x142C +#define HUAWEI_PRODUCT_E142D 0x142D +#define HUAWEI_PRODUCT_E142E 0x142E +#define HUAWEI_PRODUCT_E142F 0x142F +#define HUAWEI_PRODUCT_E1430 0x1430 +#define HUAWEI_PRODUCT_E1431 0x1431 +#define HUAWEI_PRODUCT_E1432 0x1432 +#define HUAWEI_PRODUCT_E1433 0x1433 +#define HUAWEI_PRODUCT_E1434 0x1434 +#define HUAWEI_PRODUCT_E1435 0x1435 +#define HUAWEI_PRODUCT_E1436 0x1436 +#define HUAWEI_PRODUCT_E1437 0x1437 +#define HUAWEI_PRODUCT_E1438 0x1438 +#define HUAWEI_PRODUCT_E1439 0x1439 +#define HUAWEI_PRODUCT_E143A 0x143A +#define HUAWEI_PRODUCT_E143B 0x143B +#define HUAWEI_PRODUCT_E143C 0x143C +#define HUAWEI_PRODUCT_E143D 0x143D +#define HUAWEI_PRODUCT_E143E 0x143E +#define HUAWEI_PRODUCT_E143F 0x143F #define NOVATELWIRELESS_VENDOR_ID 0x1410 @@ -207,6 +254,7 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po /* ZTE PRODUCTS */ #define ZTE_VENDOR_ID 0x19d2 #define ZTE_PRODUCT_MF628 0x0015 +#define ZTE_PRODUCT_MF626 0x0031 #define ZTE_PRODUCT_CDMA_TECH 0xfffe /* Ericsson products */ @@ -248,11 +296,20 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1402, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1404, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1407, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140A, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140B, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140C, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140D, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140E, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E140F, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412, 0xff, 0xff, 0xff) }, @@ -263,6 +320,44 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141A, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141B, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141C, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141D, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141E, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E141F, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1420, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1421, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1422, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1423, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1424, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1425, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1426, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1427, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1428, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1429, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142A, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142B, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142C, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142D, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142E, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E142F, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1430, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1431, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1432, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1433, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1434, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1435, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1436, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1437, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1438, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1439, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143A, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143B, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143C, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143D, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143E, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E143F, 0xff, 0xff, 0xff) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */ @@ -336,6 +431,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ { USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) }, + { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) }, { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G) }, diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c index 4995bb595aef..2dd9bd4bff56 100644 --- a/drivers/usb/storage/initializers.c +++ b/drivers/usb/storage/initializers.c @@ -95,11 +95,10 @@ int usb_stor_huawei_e220_init(struct us_data *us) { int result; - us->iobuf[0] = 0x1; result = usb_stor_control_msg(us, us->send_ctrl_pipe, USB_REQ_SET_FEATURE, USB_TYPE_STANDARD | USB_RECIP_DEVICE, - 0x01, 0x0, us->iobuf, 0x1, 1000); + 0x01, 0x0, NULL, 0x0, 1000); US_DEBUGP("usb_control_msg performing result is %d\n", result); return (result ? 0 : -1); } diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index cd155475cb6e..a2b9ebbef38e 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1628,97 +1628,332 @@ UNUSUAL_DEV( 0x1210, 0x0003, 0x0100, 0x0100, /* Reported by fangxiaozhi <huananhu@huawei.com> * This brings the HUAWEI data card devices into multi-port mode */ -UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1001, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1003, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1004, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1401, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1402, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1403, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1404, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1405, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1406, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1407, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1408, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1409, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x140A, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x140B, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x140C, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x140D, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x140E, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x140F, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, 0), -UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000, +UNUSUAL_DEV( 0x12d1, 0x1410, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1411, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1412, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1413, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1414, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1415, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1416, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1417, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1418, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1419, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x141A, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x141B, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x141C, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x141D, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x141E, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x141F, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1420, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1421, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1422, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1423, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1424, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1425, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1426, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1427, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1428, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1429, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x142A, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x142B, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x142C, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x142D, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x142E, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x142F, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1430, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1431, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1432, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1433, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1434, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1435, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1436, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1437, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1438, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x1439, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x143A, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x143B, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x143C, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x143D, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x143E, 0x0000, 0x0000, + "HUAWEI MOBILE", + "Mass Storage", + US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, + 0), +UNUSUAL_DEV( 0x12d1, 0x143F, 0x0000, 0x0000, "HUAWEI MOBILE", "Mass Storage", US_SC_DEVICE, US_PR_DEVICE, usb_stor_huawei_e220_init, @@ -1745,6 +1980,15 @@ UNUSUAL_DEV( 0x14cd, 0x6600, 0x0201, 0x0201, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), +/* Reported by Alexandre Oliva <oliva@lsd.ic.unicamp.br> + * JMicron responds to USN and several other SCSI ioctls with a + * residue that causes subsequent I/O requests to fail. */ +UNUSUAL_DEV( 0x152d, 0x2329, 0x0100, 0x0100, + "JMicron", + "USB to ATA/ATAPI Bridge", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_RESIDUE ), + /* Reported by Robert Schedel <r.schedel@yahoo.de> * Note: this is a 'super top' device like the above 14cd/6600 device */ UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201, @@ -1818,6 +2062,15 @@ UNUSUAL_DEV( 0x2770, 0x915d, 0x0010, 0x0010, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), +/* Reported by Frederic Marchal <frederic.marchal@wowcompany.com> + * Mio Moov 330 + */ +UNUSUAL_DEV( 0x3340, 0xffff, 0x0000, 0x0000, + "Mitac", + "Mio DigiWalker USB Sync", + US_SC_DEVICE,US_PR_DEVICE,NULL, + US_FL_MAX_SECTORS_64 ), + /* Reported by Andrey Rahmatullin <wrar@altlinux.org> */ UNUSUAL_DEV( 0x4102, 0x1020, 0x0100, 0x0100, "iRiver", diff --git a/drivers/usb/wusbcore/Kconfig b/drivers/usb/wusbcore/Kconfig new file mode 100644 index 000000000000..eb09a0a14a80 --- /dev/null +++ b/drivers/usb/wusbcore/Kconfig @@ -0,0 +1,41 @@ +# +# Wireless USB Core configuration +# +config USB_WUSB + tristate "Enable Wireless USB extensions (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on USB + select UWB + select CRYPTO + select CRYPTO_BLKCIPHER + select CRYPTO_CBC + select CRYPTO_MANAGER + select CRYPTO_AES + help + Enable the host-side support for Wireless USB. + + To compile this support select Y (built in). It is safe to + select even if you don't have the hardware. + +config USB_WUSB_CBAF + tristate "Support WUSB Cable Based Association (CBA)" + depends on USB + help + Some WUSB devices support Cable Based Association. It's used to + enable the secure communication between the host and the + device. + + Enable this option if your WUSB device must to be connected + via wired USB before establishing a wireless link. + + It is safe to select even if you don't have a compatible + hardware. + +config USB_WUSB_CBAF_DEBUG + bool "Enable CBA debug messages" + depends on USB_WUSB_CBAF + help + Say Y here if you want the CBA to produce a bunch of debug messages + to the system log. Select this if you are having a problem with + CBA support and want to see more of what is going on. + diff --git a/drivers/usb/wusbcore/Makefile b/drivers/usb/wusbcore/Makefile new file mode 100644 index 000000000000..75f1ade66258 --- /dev/null +++ b/drivers/usb/wusbcore/Makefile @@ -0,0 +1,26 @@ +obj-$(CONFIG_USB_WUSB) += wusbcore.o +obj-$(CONFIG_USB_HWA_HCD) += wusb-wa.o +obj-$(CONFIG_USB_WUSB_CBAF) += wusb-cbaf.o + + +wusbcore-objs := \ + crypto.o \ + devconnect.o \ + dev-sysfs.o \ + mmc.o \ + pal.o \ + rh.o \ + reservation.o \ + security.o \ + wusbhc.o + +wusb-cbaf-objs := cbaf.o + +wusb-wa-objs := wa-hc.o \ + wa-nep.o \ + wa-rpipe.o \ + wa-xfer.o + +ifeq ($(CONFIG_USB_WUSB_CBAF_DEBUG),y) +EXTRA_CFLAGS += -DDEBUG +endif diff --git a/drivers/usb/wusbcore/cbaf.c b/drivers/usb/wusbcore/cbaf.c new file mode 100644 index 000000000000..ab4788d1785a --- /dev/null +++ b/drivers/usb/wusbcore/cbaf.c @@ -0,0 +1,673 @@ +/* + * Wireless USB - Cable Based Association + * + * + * Copyright (C) 2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * Copyright (C) 2008 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * WUSB devices have to be paired (associated in WUSB lingo) so + * that they can connect to the system. + * + * One way of pairing is using CBA-Cable Based Association. First + * time you plug the device with a cable, association is done between + * host and device and subsequent times, you can connect wirelessly + * without having to associate again. That's the idea. + * + * This driver does nothing Earth shattering. It just provides an + * interface to chat with the wire-connected device so we can get a + * CDID (device ID) that might have been previously associated to a + * CHID (host ID) and to set up a new <CHID,CDID,CK> triplet + * (connection context), with the CK being the secret, or connection + * key. This is the pairing data. + * + * When a device with the CBA capability connects, the probe routine + * just creates a bunch of sysfs files that a user space enumeration + * manager uses to allow it to connect wirelessly to the system or not. + * + * The process goes like this: + * + * 1. Device plugs, cbaf is loaded, notifications happen. + * + * 2. The connection manager (CM) sees a device with CBAF capability + * (the wusb_chid etc. files in /sys/devices/blah/OURDEVICE). + * + * 3. The CM writes the host name, supported band groups, and the CHID + * (host ID) into the wusb_host_name, wusb_host_band_groups and + * wusb_chid files. These get sent to the device and the CDID (if + * any) for this host is requested. + * + * 4. The CM can verify that the device's supported band groups + * (wusb_device_band_groups) are compatible with the host. + * + * 5. The CM reads the wusb_cdid file. + * + * 6. The CM looks up its database + * + * 6.1 If it has a matching CHID,CDID entry, the device has been + * authorized before (paired) and nothing further needs to be + * done. + * + * 6.2 If the CDID is zero (or the CM doesn't find a matching CDID in + * its database), the device is assumed to be not known. The CM + * may associate the host with device by: writing a randomly + * generated CDID to wusb_cdid and then a random CK to wusb_ck + * (this uploads the new CC to the device). + * + * CMD may choose to prompt the user before associating with a new + * device. + * + * 7. Device is unplugged. + * + * When the device tries to connect wirelessly, it will present its + * CDID to the WUSB host controller. The CM will query the + * database. If the CHID/CDID pair found, it will (with a 4-way + * handshake) challenge the device to demonstrate it has the CK secret + * key (from our database) without actually exchanging it. Once + * satisfied, crypto keys are derived from the CK, the device is + * connected and all communication is encrypted. + * + * References: + * [WUSB-AM] Association Models Supplement to the Certified Wireless + * Universal Serial Bus Specification, version 1.0. + */ +#include <linux/module.h> +#include <linux/ctype.h> +#include <linux/version.h> +#include <linux/usb.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/random.h> +#include <linux/mutex.h> +#include <linux/uwb.h> +#include <linux/usb/wusb.h> +#include <linux/usb/association.h> + +#define CBA_NAME_LEN 0x40 /* [WUSB-AM] table 4-7 */ + +/* An instance of a Cable-Based-Association-Framework device */ +struct cbaf { + struct usb_device *usb_dev; + struct usb_interface *usb_iface; + void *buffer; + size_t buffer_size; + + struct wusb_ckhdid chid; + char host_name[CBA_NAME_LEN]; + u16 host_band_groups; + + struct wusb_ckhdid cdid; + char device_name[CBA_NAME_LEN]; + u16 device_band_groups; + + struct wusb_ckhdid ck; +}; + +/* + * Verify that a CBAF USB-interface has what we need + * + * According to [WUSB-AM], CBA devices should provide at least two + * interfaces: + * - RETRIEVE_HOST_INFO + * - ASSOCIATE + * + * If the device doesn't provide these interfaces, we do not know how + * to deal with it. + */ +static int cbaf_check(struct cbaf *cbaf) +{ + int result; + struct device *dev = &cbaf->usb_iface->dev; + struct wusb_cbaf_assoc_info *assoc_info; + struct wusb_cbaf_assoc_request *assoc_request; + size_t assoc_size; + void *itr, *top; + int ar_rhi = 0, ar_assoc = 0; + + result = usb_control_msg( + cbaf->usb_dev, usb_rcvctrlpipe(cbaf->usb_dev, 0), + CBAF_REQ_GET_ASSOCIATION_INFORMATION, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber, + cbaf->buffer, cbaf->buffer_size, 1000 /* FIXME: arbitrary */); + if (result < 0) { + dev_err(dev, "Cannot get available association types: %d\n", + result); + return result; + } + + assoc_info = cbaf->buffer; + if (result < sizeof(*assoc_info)) { + dev_err(dev, "Not enough data to decode association info " + "header (%zu vs %zu bytes required)\n", + (size_t)result, sizeof(*assoc_info)); + return result; + } + + assoc_size = le16_to_cpu(assoc_info->Length); + if (result < assoc_size) { + dev_err(dev, "Not enough data to decode association info " + "(%zu vs %zu bytes required)\n", + (size_t)assoc_size, sizeof(*assoc_info)); + return result; + } + /* + * From now on, we just verify, but won't error out unless we + * don't find the AR_TYPE_WUSB_{RETRIEVE_HOST_INFO,ASSOCIATE} + * types. + */ + itr = cbaf->buffer + sizeof(*assoc_info); + top = cbaf->buffer + assoc_size; + dev_dbg(dev, "Found %u association requests (%zu bytes)\n", + assoc_info->NumAssociationRequests, assoc_size); + + while (itr < top) { + u16 ar_type, ar_subtype; + u32 ar_size; + const char *ar_name; + + assoc_request = itr; + + if (top - itr < sizeof(*assoc_request)) { + dev_err(dev, "Not enough data to decode associaton " + "request (%zu vs %zu bytes needed)\n", + top - itr, sizeof(*assoc_request)); + break; + } + + ar_type = le16_to_cpu(assoc_request->AssociationTypeId); + ar_subtype = le16_to_cpu(assoc_request->AssociationSubTypeId); + ar_size = le32_to_cpu(assoc_request->AssociationTypeInfoSize); + ar_name = "unknown"; + + switch (ar_type) { + case AR_TYPE_WUSB: + /* Verify we have what is mandated by [WUSB-AM]. */ + switch (ar_subtype) { + case AR_TYPE_WUSB_RETRIEVE_HOST_INFO: + ar_name = "RETRIEVE_HOST_INFO"; + ar_rhi = 1; + break; + case AR_TYPE_WUSB_ASSOCIATE: + /* send assoc data */ + ar_name = "ASSOCIATE"; + ar_assoc = 1; + break; + }; + break; + }; + + dev_dbg(dev, "Association request #%02u: 0x%04x/%04x " + "(%zu bytes): %s\n", + assoc_request->AssociationDataIndex, ar_type, + ar_subtype, (size_t)ar_size, ar_name); + + itr += sizeof(*assoc_request); + } + + if (!ar_rhi) { + dev_err(dev, "Missing RETRIEVE_HOST_INFO association " + "request\n"); + return -EINVAL; + } + if (!ar_assoc) { + dev_err(dev, "Missing ASSOCIATE association request\n"); + return -EINVAL; + } + + return 0; +} + +static const struct wusb_cbaf_host_info cbaf_host_info_defaults = { + .AssociationTypeId_hdr = WUSB_AR_AssociationTypeId, + .AssociationTypeId = cpu_to_le16(AR_TYPE_WUSB), + .AssociationSubTypeId_hdr = WUSB_AR_AssociationSubTypeId, + .AssociationSubTypeId = cpu_to_le16(AR_TYPE_WUSB_RETRIEVE_HOST_INFO), + .CHID_hdr = WUSB_AR_CHID, + .LangID_hdr = WUSB_AR_LangID, + .HostFriendlyName_hdr = WUSB_AR_HostFriendlyName, +}; + +/* Send WUSB host information (CHID and name) to a CBAF device */ +static int cbaf_send_host_info(struct cbaf *cbaf) +{ + struct wusb_cbaf_host_info *hi; + size_t name_len; + size_t hi_size; + + hi = cbaf->buffer; + memset(hi, 0, sizeof(*hi)); + *hi = cbaf_host_info_defaults; + hi->CHID = cbaf->chid; + hi->LangID = 0; /* FIXME: I guess... */ + strlcpy(hi->HostFriendlyName, cbaf->host_name, CBA_NAME_LEN); + name_len = strlen(cbaf->host_name); + hi->HostFriendlyName_hdr.len = cpu_to_le16(name_len); + hi_size = sizeof(*hi) + name_len; + + return usb_control_msg(cbaf->usb_dev, usb_sndctrlpipe(cbaf->usb_dev, 0), + CBAF_REQ_SET_ASSOCIATION_RESPONSE, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0x0101, + cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber, + hi, hi_size, 1000 /* FIXME: arbitrary */); +} + +/* + * Get device's information (CDID) associated to CHID + * + * The device will return it's information (CDID, name, bandgroups) + * associated to the CHID we have set before, or 0 CDID and default + * name and bandgroup if no CHID set or unknown. + */ +static int cbaf_cdid_get(struct cbaf *cbaf) +{ + int result; + struct device *dev = &cbaf->usb_iface->dev; + struct wusb_cbaf_device_info *di; + size_t needed; + + di = cbaf->buffer; + result = usb_control_msg( + cbaf->usb_dev, usb_rcvctrlpipe(cbaf->usb_dev, 0), + CBAF_REQ_GET_ASSOCIATION_REQUEST, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0x0200, cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber, + di, cbaf->buffer_size, 1000 /* FIXME: arbitrary */); + if (result < 0) { + dev_err(dev, "Cannot request device information: %d\n", result); + return result; + } + + needed = result < sizeof(*di) ? sizeof(*di) : le32_to_cpu(di->Length); + if (result < needed) { + dev_err(dev, "Not enough data in DEVICE_INFO reply (%zu vs " + "%zu bytes needed)\n", (size_t)result, needed); + return result; + } + + strlcpy(cbaf->device_name, di->DeviceFriendlyName, CBA_NAME_LEN); + cbaf->cdid = di->CDID; + cbaf->device_band_groups = le16_to_cpu(di->BandGroups); + + return 0; +} + +static ssize_t cbaf_wusb_chid_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct usb_interface *iface = to_usb_interface(dev); + struct cbaf *cbaf = usb_get_intfdata(iface); + char pr_chid[WUSB_CKHDID_STRSIZE]; + + ckhdid_printf(pr_chid, sizeof(pr_chid), &cbaf->chid); + return scnprintf(buf, PAGE_SIZE, "%s\n", pr_chid); +} + +static ssize_t cbaf_wusb_chid_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + ssize_t result; + struct usb_interface *iface = to_usb_interface(dev); + struct cbaf *cbaf = usb_get_intfdata(iface); + + result = sscanf(buf, + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx", + &cbaf->chid.data[0] , &cbaf->chid.data[1], + &cbaf->chid.data[2] , &cbaf->chid.data[3], + &cbaf->chid.data[4] , &cbaf->chid.data[5], + &cbaf->chid.data[6] , &cbaf->chid.data[7], + &cbaf->chid.data[8] , &cbaf->chid.data[9], + &cbaf->chid.data[10], &cbaf->chid.data[11], + &cbaf->chid.data[12], &cbaf->chid.data[13], + &cbaf->chid.data[14], &cbaf->chid.data[15]); + + if (result != 16) + return -EINVAL; + + result = cbaf_send_host_info(cbaf); + if (result < 0) + return result; + result = cbaf_cdid_get(cbaf); + if (result < 0) + return -result; + return size; +} +static DEVICE_ATTR(wusb_chid, 0600, cbaf_wusb_chid_show, cbaf_wusb_chid_store); + +static ssize_t cbaf_wusb_host_name_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct usb_interface *iface = to_usb_interface(dev); + struct cbaf *cbaf = usb_get_intfdata(iface); + + return scnprintf(buf, PAGE_SIZE, "%s\n", cbaf->host_name); +} + +static ssize_t cbaf_wusb_host_name_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + ssize_t result; + struct usb_interface *iface = to_usb_interface(dev); + struct cbaf *cbaf = usb_get_intfdata(iface); + + result = sscanf(buf, "%63s", cbaf->host_name); + if (result != 1) + return -EINVAL; + + return size; +} +static DEVICE_ATTR(wusb_host_name, 0600, cbaf_wusb_host_name_show, + cbaf_wusb_host_name_store); + +static ssize_t cbaf_wusb_host_band_groups_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct usb_interface *iface = to_usb_interface(dev); + struct cbaf *cbaf = usb_get_intfdata(iface); + + return scnprintf(buf, PAGE_SIZE, "0x%04x\n", cbaf->host_band_groups); +} + +static ssize_t cbaf_wusb_host_band_groups_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + ssize_t result; + struct usb_interface *iface = to_usb_interface(dev); + struct cbaf *cbaf = usb_get_intfdata(iface); + u16 band_groups = 0; + + result = sscanf(buf, "%04hx", &band_groups); + if (result != 1) + return -EINVAL; + + cbaf->host_band_groups = band_groups; + + return size; +} + +static DEVICE_ATTR(wusb_host_band_groups, 0600, + cbaf_wusb_host_band_groups_show, + cbaf_wusb_host_band_groups_store); + +static const struct wusb_cbaf_device_info cbaf_device_info_defaults = { + .Length_hdr = WUSB_AR_Length, + .CDID_hdr = WUSB_AR_CDID, + .BandGroups_hdr = WUSB_AR_BandGroups, + .LangID_hdr = WUSB_AR_LangID, + .DeviceFriendlyName_hdr = WUSB_AR_DeviceFriendlyName, +}; + +static ssize_t cbaf_wusb_cdid_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct usb_interface *iface = to_usb_interface(dev); + struct cbaf *cbaf = usb_get_intfdata(iface); + char pr_cdid[WUSB_CKHDID_STRSIZE]; + + ckhdid_printf(pr_cdid, sizeof(pr_cdid), &cbaf->cdid); + return scnprintf(buf, PAGE_SIZE, "%s\n", pr_cdid); +} + +static ssize_t cbaf_wusb_cdid_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + ssize_t result; + struct usb_interface *iface = to_usb_interface(dev); + struct cbaf *cbaf = usb_get_intfdata(iface); + struct wusb_ckhdid cdid; + + result = sscanf(buf, + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx", + &cdid.data[0] , &cdid.data[1], + &cdid.data[2] , &cdid.data[3], + &cdid.data[4] , &cdid.data[5], + &cdid.data[6] , &cdid.data[7], + &cdid.data[8] , &cdid.data[9], + &cdid.data[10], &cdid.data[11], + &cdid.data[12], &cdid.data[13], + &cdid.data[14], &cdid.data[15]); + if (result != 16) + return -EINVAL; + + cbaf->cdid = cdid; + + return size; +} +static DEVICE_ATTR(wusb_cdid, 0600, cbaf_wusb_cdid_show, cbaf_wusb_cdid_store); + +static ssize_t cbaf_wusb_device_band_groups_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct usb_interface *iface = to_usb_interface(dev); + struct cbaf *cbaf = usb_get_intfdata(iface); + + return scnprintf(buf, PAGE_SIZE, "0x%04x\n", cbaf->device_band_groups); +} + +static DEVICE_ATTR(wusb_device_band_groups, 0600, + cbaf_wusb_device_band_groups_show, + NULL); + +static ssize_t cbaf_wusb_device_name_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct usb_interface *iface = to_usb_interface(dev); + struct cbaf *cbaf = usb_get_intfdata(iface); + + return scnprintf(buf, PAGE_SIZE, "%s\n", cbaf->device_name); +} +static DEVICE_ATTR(wusb_device_name, 0600, cbaf_wusb_device_name_show, NULL); + +static const struct wusb_cbaf_cc_data cbaf_cc_data_defaults = { + .AssociationTypeId_hdr = WUSB_AR_AssociationTypeId, + .AssociationTypeId = cpu_to_le16(AR_TYPE_WUSB), + .AssociationSubTypeId_hdr = WUSB_AR_AssociationSubTypeId, + .AssociationSubTypeId = cpu_to_le16(AR_TYPE_WUSB_ASSOCIATE), + .Length_hdr = WUSB_AR_Length, + .Length = cpu_to_le32(sizeof(struct wusb_cbaf_cc_data)), + .ConnectionContext_hdr = WUSB_AR_ConnectionContext, + .BandGroups_hdr = WUSB_AR_BandGroups, +}; + +static const struct wusb_cbaf_cc_data_fail cbaf_cc_data_fail_defaults = { + .AssociationTypeId_hdr = WUSB_AR_AssociationTypeId, + .AssociationSubTypeId_hdr = WUSB_AR_AssociationSubTypeId, + .Length_hdr = WUSB_AR_Length, + .AssociationStatus_hdr = WUSB_AR_AssociationStatus, +}; + +/* + * Send a new CC to the device. + */ +static int cbaf_cc_upload(struct cbaf *cbaf) +{ + int result; + struct device *dev = &cbaf->usb_iface->dev; + struct wusb_cbaf_cc_data *ccd; + char pr_cdid[WUSB_CKHDID_STRSIZE]; + + ccd = cbaf->buffer; + *ccd = cbaf_cc_data_defaults; + ccd->CHID = cbaf->chid; + ccd->CDID = cbaf->cdid; + ccd->CK = cbaf->ck; + ccd->BandGroups = cpu_to_le16(cbaf->host_band_groups); + + dev_dbg(dev, "Trying to upload CC:\n"); + ckhdid_printf(pr_cdid, sizeof(pr_cdid), &ccd->CHID); + dev_dbg(dev, " CHID %s\n", pr_cdid); + ckhdid_printf(pr_cdid, sizeof(pr_cdid), &ccd->CDID); + dev_dbg(dev, " CDID %s\n", pr_cdid); + dev_dbg(dev, " Bandgroups 0x%04x\n", cbaf->host_band_groups); + + result = usb_control_msg( + cbaf->usb_dev, usb_sndctrlpipe(cbaf->usb_dev, 0), + CBAF_REQ_SET_ASSOCIATION_RESPONSE, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0x0201, cbaf->usb_iface->cur_altsetting->desc.bInterfaceNumber, + ccd, sizeof(*ccd), 1000 /* FIXME: arbitrary */); + + return result; +} + +static ssize_t cbaf_wusb_ck_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + ssize_t result; + struct usb_interface *iface = to_usb_interface(dev); + struct cbaf *cbaf = usb_get_intfdata(iface); + + result = sscanf(buf, + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx", + &cbaf->ck.data[0] , &cbaf->ck.data[1], + &cbaf->ck.data[2] , &cbaf->ck.data[3], + &cbaf->ck.data[4] , &cbaf->ck.data[5], + &cbaf->ck.data[6] , &cbaf->ck.data[7], + &cbaf->ck.data[8] , &cbaf->ck.data[9], + &cbaf->ck.data[10], &cbaf->ck.data[11], + &cbaf->ck.data[12], &cbaf->ck.data[13], + &cbaf->ck.data[14], &cbaf->ck.data[15]); + if (result != 16) + return -EINVAL; + + result = cbaf_cc_upload(cbaf); + if (result < 0) + return result; + + return size; +} +static DEVICE_ATTR(wusb_ck, 0600, NULL, cbaf_wusb_ck_store); + +static struct attribute *cbaf_dev_attrs[] = { + &dev_attr_wusb_host_name.attr, + &dev_attr_wusb_host_band_groups.attr, + &dev_attr_wusb_chid.attr, + &dev_attr_wusb_cdid.attr, + &dev_attr_wusb_device_name.attr, + &dev_attr_wusb_device_band_groups.attr, + &dev_attr_wusb_ck.attr, + NULL, +}; + +static struct attribute_group cbaf_dev_attr_group = { + .name = NULL, /* we want them in the same directory */ + .attrs = cbaf_dev_attrs, +}; + +static int cbaf_probe(struct usb_interface *iface, + const struct usb_device_id *id) +{ + struct cbaf *cbaf; + struct device *dev = &iface->dev; + int result = -ENOMEM; + + cbaf = kzalloc(sizeof(*cbaf), GFP_KERNEL); + if (cbaf == NULL) + goto error_kzalloc; + cbaf->buffer = kmalloc(512, GFP_KERNEL); + if (cbaf->buffer == NULL) + goto error_kmalloc_buffer; + + cbaf->buffer_size = 512; + cbaf->usb_dev = usb_get_dev(interface_to_usbdev(iface)); + cbaf->usb_iface = usb_get_intf(iface); + result = cbaf_check(cbaf); + if (result < 0) { + dev_err(dev, "This device is not WUSB-CBAF compliant" + "and is not supported yet.\n"); + goto error_check; + } + + result = sysfs_create_group(&dev->kobj, &cbaf_dev_attr_group); + if (result < 0) { + dev_err(dev, "Can't register sysfs attr group: %d\n", result); + goto error_create_group; + } + usb_set_intfdata(iface, cbaf); + return 0; + +error_create_group: +error_check: + kfree(cbaf->buffer); +error_kmalloc_buffer: + kfree(cbaf); +error_kzalloc: + return result; +} + +static void cbaf_disconnect(struct usb_interface *iface) +{ + struct cbaf *cbaf = usb_get_intfdata(iface); + struct device *dev = &iface->dev; + sysfs_remove_group(&dev->kobj, &cbaf_dev_attr_group); + usb_set_intfdata(iface, NULL); + usb_put_intf(iface); + kfree(cbaf->buffer); + /* paranoia: clean up crypto keys */ + memset(cbaf, 0, sizeof(*cbaf)); + kfree(cbaf); +} + +static struct usb_device_id cbaf_id_table[] = { + { USB_INTERFACE_INFO(0xef, 0x03, 0x01), }, + { }, +}; +MODULE_DEVICE_TABLE(usb, cbaf_id_table); + +static struct usb_driver cbaf_driver = { + .name = "wusb-cbaf", + .id_table = cbaf_id_table, + .probe = cbaf_probe, + .disconnect = cbaf_disconnect, +}; + +static int __init cbaf_driver_init(void) +{ + return usb_register(&cbaf_driver); +} +module_init(cbaf_driver_init); + +static void __exit cbaf_driver_exit(void) +{ + usb_deregister(&cbaf_driver); +} +module_exit(cbaf_driver_exit); + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("Wireless USB Cable Based Association"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/wusbcore/crypto.c b/drivers/usb/wusbcore/crypto.c new file mode 100644 index 000000000000..c36c4389baae --- /dev/null +++ b/drivers/usb/wusbcore/crypto.c @@ -0,0 +1,538 @@ +/* + * Ultra Wide Band + * AES-128 CCM Encryption + * + * Copyright (C) 2007 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * We don't do any encryption here; we use the Linux Kernel's AES-128 + * crypto modules to construct keys and payload blocks in a way + * defined by WUSB1.0[6]. Check the erratas, as typos are are patched + * there. + * + * Thanks a zillion to John Keys for his help and clarifications over + * the designed-by-a-committee text. + * + * So the idea is that there is this basic Pseudo-Random-Function + * defined in WUSB1.0[6.5] which is the core of everything. It works + * by tweaking some blocks, AES crypting them and then xoring + * something else with them (this seems to be called CBC(AES) -- can + * you tell I know jack about crypto?). So we just funnel it into the + * Linux Crypto API. + * + * We leave a crypto test module so we can verify that vectors match, + * every now and then. + * + * Block size: 16 bytes -- AES seems to do things in 'block sizes'. I + * am learning a lot... + * + * Conveniently, some data structures that need to be + * funneled through AES are...16 bytes in size! + */ + +#include <linux/crypto.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/uwb.h> +#include <linux/usb/wusb.h> +#include <linux/scatterlist.h> +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + + +/* + * Block of data, as understood by AES-CCM + * + * The code assumes this structure is nothing but a 16 byte array + * (packed in a struct to avoid common mess ups that I usually do with + * arrays and enforcing type checking). + */ +struct aes_ccm_block { + u8 data[16]; +} __attribute__((packed)); + +/* + * Counter-mode Blocks (WUSB1.0[6.4]) + * + * According to CCM (or so it seems), for the purpose of calculating + * the MIC, the message is broken in N counter-mode blocks, B0, B1, + * ... BN. + * + * B0 contains flags, the CCM nonce and l(m). + * + * B1 contains l(a), the MAC header, the encryption offset and padding. + * + * If EO is nonzero, additional blocks are built from payload bytes + * until EO is exahusted (FIXME: padding to 16 bytes, I guess). The + * padding is not xmitted. + */ + +/* WUSB1.0[T6.4] */ +struct aes_ccm_b0 { + u8 flags; /* 0x59, per CCM spec */ + struct aes_ccm_nonce ccm_nonce; + __be16 lm; +} __attribute__((packed)); + +/* WUSB1.0[T6.5] */ +struct aes_ccm_b1 { + __be16 la; + u8 mac_header[10]; + __le16 eo; + u8 security_reserved; /* This is always zero */ + u8 padding; /* 0 */ +} __attribute__((packed)); + +/* + * Encryption Blocks (WUSB1.0[6.4.4]) + * + * CCM uses Ax blocks to generate a keystream with which the MIC and + * the message's payload are encoded. A0 always encrypts/decrypts the + * MIC. Ax (x>0) are used for the sucesive payload blocks. + * + * The x is the counter, and is increased for each block. + */ +struct aes_ccm_a { + u8 flags; /* 0x01, per CCM spec */ + struct aes_ccm_nonce ccm_nonce; + __be16 counter; /* Value of x */ +} __attribute__((packed)); + +static void bytewise_xor(void *_bo, const void *_bi1, const void *_bi2, + size_t size) +{ + u8 *bo = _bo; + const u8 *bi1 = _bi1, *bi2 = _bi2; + size_t itr; + for (itr = 0; itr < size; itr++) + bo[itr] = bi1[itr] ^ bi2[itr]; +} + +/* + * CC-MAC function WUSB1.0[6.5] + * + * Take a data string and produce the encrypted CBC Counter-mode MIC + * + * Note the names for most function arguments are made to (more or + * less) match those used in the pseudo-function definition given in + * WUSB1.0[6.5]. + * + * @tfm_cbc: CBC(AES) blkcipher handle (initialized) + * + * @tfm_aes: AES cipher handle (initialized) + * + * @mic: buffer for placing the computed MIC (Message Integrity + * Code). This is exactly 8 bytes, and we expect the buffer to + * be at least eight bytes in length. + * + * @key: 128 bit symmetric key + * + * @n: CCM nonce + * + * @a: ASCII string, 14 bytes long (I guess zero padded if needed; + * we use exactly 14 bytes). + * + * @b: data stream to be processed; cannot be a global or const local + * (will confuse the scatterlists) + * + * @blen: size of b... + * + * Still not very clear how this is done, but looks like this: we + * create block B0 (as WUSB1.0[6.5] says), then we AES-crypt it with + * @key. We bytewise xor B0 with B1 (1) and AES-crypt that. Then we + * take the payload and divide it in blocks (16 bytes), xor them with + * the previous crypto result (16 bytes) and crypt it, repeat the next + * block with the output of the previous one, rinse wash (I guess this + * is what AES CBC mode means...but I truly have no idea). So we use + * the CBC(AES) blkcipher, that does precisely that. The IV (Initial + * Vector) is 16 bytes and is set to zero, so + * + * See rfc3610. Linux crypto has a CBC implementation, but the + * documentation is scarce, to say the least, and the example code is + * so intricated that is difficult to understand how things work. Most + * of this is guess work -- bite me. + * + * (1) Created as 6.5 says, again, using as l(a) 'Blen + 14', and + * using the 14 bytes of @a to fill up + * b1.{mac_header,e0,security_reserved,padding}. + * + * NOTE: The definiton of l(a) in WUSB1.0[6.5] vs the definition of + * l(m) is orthogonal, they bear no relationship, so it is not + * in conflict with the parameter's relation that + * WUSB1.0[6.4.2]) defines. + * + * NOTE: WUSB1.0[A.1]: Host Nonce is missing a nibble? (1e); fixed in + * first errata released on 2005/07. + * + * NOTE: we need to clean IV to zero at each invocation to make sure + * we start with a fresh empty Initial Vector, so that the CBC + * works ok. + * + * NOTE: blen is not aligned to a block size, we'll pad zeros, that's + * what sg[4] is for. Maybe there is a smarter way to do this. + */ +static int wusb_ccm_mac(struct crypto_blkcipher *tfm_cbc, + struct crypto_cipher *tfm_aes, void *mic, + const struct aes_ccm_nonce *n, + const struct aes_ccm_label *a, const void *b, + size_t blen) +{ + int result = 0; + struct blkcipher_desc desc; + struct aes_ccm_b0 b0; + struct aes_ccm_b1 b1; + struct aes_ccm_a ax; + struct scatterlist sg[4], sg_dst; + void *iv, *dst_buf; + size_t ivsize, dst_size; + const u8 bzero[16] = { 0 }; + size_t zero_padding; + + d_fnstart(3, NULL, "(tfm_cbc %p, tfm_aes %p, mic %p, " + "n %p, a %p, b %p, blen %zu)\n", + tfm_cbc, tfm_aes, mic, n, a, b, blen); + /* + * These checks should be compile time optimized out + * ensure @a fills b1's mac_header and following fields + */ + WARN_ON(sizeof(*a) != sizeof(b1) - sizeof(b1.la)); + WARN_ON(sizeof(b0) != sizeof(struct aes_ccm_block)); + WARN_ON(sizeof(b1) != sizeof(struct aes_ccm_block)); + WARN_ON(sizeof(ax) != sizeof(struct aes_ccm_block)); + + result = -ENOMEM; + zero_padding = sizeof(struct aes_ccm_block) + - blen % sizeof(struct aes_ccm_block); + zero_padding = blen % sizeof(struct aes_ccm_block); + if (zero_padding) + zero_padding = sizeof(struct aes_ccm_block) - zero_padding; + dst_size = blen + sizeof(b0) + sizeof(b1) + zero_padding; + dst_buf = kzalloc(dst_size, GFP_KERNEL); + if (dst_buf == NULL) { + printk(KERN_ERR "E: can't alloc destination buffer\n"); + goto error_dst_buf; + } + + iv = crypto_blkcipher_crt(tfm_cbc)->iv; + ivsize = crypto_blkcipher_ivsize(tfm_cbc); + memset(iv, 0, ivsize); + + /* Setup B0 */ + b0.flags = 0x59; /* Format B0 */ + b0.ccm_nonce = *n; + b0.lm = cpu_to_be16(0); /* WUSB1.0[6.5] sez l(m) is 0 */ + + /* Setup B1 + * + * The WUSB spec is anything but clear! WUSB1.0[6.5] + * says that to initialize B1 from A with 'l(a) = blen + + * 14'--after clarification, it means to use A's contents + * for MAC Header, EO, sec reserved and padding. + */ + b1.la = cpu_to_be16(blen + 14); + memcpy(&b1.mac_header, a, sizeof(*a)); + + d_printf(4, NULL, "I: B0 (%zu bytes)\n", sizeof(b0)); + d_dump(4, NULL, &b0, sizeof(b0)); + d_printf(4, NULL, "I: B1 (%zu bytes)\n", sizeof(b1)); + d_dump(4, NULL, &b1, sizeof(b1)); + d_printf(4, NULL, "I: B (%zu bytes)\n", blen); + d_dump(4, NULL, b, blen); + d_printf(4, NULL, "I: B 0-padding (%zu bytes)\n", zero_padding); + d_printf(4, NULL, "D: IV before crypto (%zu)\n", ivsize); + d_dump(4, NULL, iv, ivsize); + + sg_init_table(sg, ARRAY_SIZE(sg)); + sg_set_buf(&sg[0], &b0, sizeof(b0)); + sg_set_buf(&sg[1], &b1, sizeof(b1)); + sg_set_buf(&sg[2], b, blen); + /* 0 if well behaved :) */ + sg_set_buf(&sg[3], bzero, zero_padding); + sg_init_one(&sg_dst, dst_buf, dst_size); + + desc.tfm = tfm_cbc; + desc.flags = 0; + result = crypto_blkcipher_encrypt(&desc, &sg_dst, sg, dst_size); + if (result < 0) { + printk(KERN_ERR "E: can't compute CBC-MAC tag (MIC): %d\n", + result); + goto error_cbc_crypt; + } + d_printf(4, NULL, "D: MIC tag\n"); + d_dump(4, NULL, iv, ivsize); + + /* Now we crypt the MIC Tag (*iv) with Ax -- values per WUSB1.0[6.5] + * The procedure is to AES crypt the A0 block and XOR the MIC + * Tag agains it; we only do the first 8 bytes and place it + * directly in the destination buffer. + * + * POS Crypto API: size is assumed to be AES's block size. + * Thanks for documenting it -- tip taken from airo.c + */ + ax.flags = 0x01; /* as per WUSB 1.0 spec */ + ax.ccm_nonce = *n; + ax.counter = 0; + crypto_cipher_encrypt_one(tfm_aes, (void *)&ax, (void *)&ax); + bytewise_xor(mic, &ax, iv, 8); + d_printf(4, NULL, "D: CTR[MIC]\n"); + d_dump(4, NULL, &ax, 8); + d_printf(4, NULL, "D: CCM-MIC tag\n"); + d_dump(4, NULL, mic, 8); + result = 8; +error_cbc_crypt: + kfree(dst_buf); +error_dst_buf: + d_fnend(3, NULL, "(tfm_cbc %p, tfm_aes %p, mic %p, " + "n %p, a %p, b %p, blen %zu)\n", + tfm_cbc, tfm_aes, mic, n, a, b, blen); + return result; +} + +/* + * WUSB Pseudo Random Function (WUSB1.0[6.5]) + * + * @b: buffer to the source data; cannot be a global or const local + * (will confuse the scatterlists) + */ +ssize_t wusb_prf(void *out, size_t out_size, + const u8 key[16], const struct aes_ccm_nonce *_n, + const struct aes_ccm_label *a, + const void *b, size_t blen, size_t len) +{ + ssize_t result, bytes = 0, bitr; + struct aes_ccm_nonce n = *_n; + struct crypto_blkcipher *tfm_cbc; + struct crypto_cipher *tfm_aes; + u64 sfn = 0; + __le64 sfn_le; + + d_fnstart(3, NULL, "(out %p, out_size %zu, key %p, _n %p, " + "a %p, b %p, blen %zu, len %zu)\n", out, out_size, + key, _n, a, b, blen, len); + + tfm_cbc = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC); + if (IS_ERR(tfm_cbc)) { + result = PTR_ERR(tfm_cbc); + printk(KERN_ERR "E: can't load CBC(AES): %d\n", (int)result); + goto error_alloc_cbc; + } + result = crypto_blkcipher_setkey(tfm_cbc, key, 16); + if (result < 0) { + printk(KERN_ERR "E: can't set CBC key: %d\n", (int)result); + goto error_setkey_cbc; + } + + tfm_aes = crypto_alloc_cipher("aes", 0, CRYPTO_ALG_ASYNC); + if (IS_ERR(tfm_aes)) { + result = PTR_ERR(tfm_aes); + printk(KERN_ERR "E: can't load AES: %d\n", (int)result); + goto error_alloc_aes; + } + result = crypto_cipher_setkey(tfm_aes, key, 16); + if (result < 0) { + printk(KERN_ERR "E: can't set AES key: %d\n", (int)result); + goto error_setkey_aes; + } + + for (bitr = 0; bitr < (len + 63) / 64; bitr++) { + sfn_le = cpu_to_le64(sfn++); + memcpy(&n.sfn, &sfn_le, sizeof(n.sfn)); /* n.sfn++... */ + result = wusb_ccm_mac(tfm_cbc, tfm_aes, out + bytes, + &n, a, b, blen); + if (result < 0) + goto error_ccm_mac; + bytes += result; + } + result = bytes; +error_ccm_mac: +error_setkey_aes: + crypto_free_cipher(tfm_aes); +error_alloc_aes: +error_setkey_cbc: + crypto_free_blkcipher(tfm_cbc); +error_alloc_cbc: + d_fnend(3, NULL, "(out %p, out_size %zu, key %p, _n %p, " + "a %p, b %p, blen %zu, len %zu) = %d\n", out, out_size, + key, _n, a, b, blen, len, (int)bytes); + return result; +} + +/* WUSB1.0[A.2] test vectors */ +static const u8 stv_hsmic_key[16] = { + 0x4b, 0x79, 0xa3, 0xcf, 0xe5, 0x53, 0x23, 0x9d, + 0xd7, 0xc1, 0x6d, 0x1c, 0x2d, 0xab, 0x6d, 0x3f +}; + +static const struct aes_ccm_nonce stv_hsmic_n = { + .sfn = { 0 }, + .tkid = { 0x76, 0x98, 0x01, }, + .dest_addr = { .data = { 0xbe, 0x00 } }, + .src_addr = { .data = { 0x76, 0x98 } }, +}; + +/* + * Out-of-band MIC Generation verification code + * + */ +static int wusb_oob_mic_verify(void) +{ + int result; + u8 mic[8]; + /* WUSB1.0[A.2] test vectors + * + * Need to keep it in the local stack as GCC 4.1.3something + * messes up and generates noise. + */ + struct usb_handshake stv_hsmic_hs = { + .bMessageNumber = 2, + .bStatus = 00, + .tTKID = { 0x76, 0x98, 0x01 }, + .bReserved = 00, + .CDID = { 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, + 0x36, 0x37, 0x38, 0x39, 0x3a, 0x3b, + 0x3c, 0x3d, 0x3e, 0x3f }, + .nonce = { 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, + 0x26, 0x27, 0x28, 0x29, 0x2a, 0x2b, + 0x2c, 0x2d, 0x2e, 0x2f }, + .MIC = { 0x75, 0x6a, 0x97, 0x51, 0x0c, 0x8c, + 0x14, 0x7b } , + }; + size_t hs_size; + + result = wusb_oob_mic(mic, stv_hsmic_key, &stv_hsmic_n, &stv_hsmic_hs); + if (result < 0) + printk(KERN_ERR "E: WUSB OOB MIC test: failed: %d\n", result); + else if (memcmp(stv_hsmic_hs.MIC, mic, sizeof(mic))) { + printk(KERN_ERR "E: OOB MIC test: " + "mismatch between MIC result and WUSB1.0[A2]\n"); + hs_size = sizeof(stv_hsmic_hs) - sizeof(stv_hsmic_hs.MIC); + printk(KERN_ERR "E: Handshake2 in: (%zu bytes)\n", hs_size); + dump_bytes(NULL, &stv_hsmic_hs, hs_size); + printk(KERN_ERR "E: CCM Nonce in: (%zu bytes)\n", + sizeof(stv_hsmic_n)); + dump_bytes(NULL, &stv_hsmic_n, sizeof(stv_hsmic_n)); + printk(KERN_ERR "E: MIC out:\n"); + dump_bytes(NULL, mic, sizeof(mic)); + printk(KERN_ERR "E: MIC out (from WUSB1.0[A.2]):\n"); + dump_bytes(NULL, stv_hsmic_hs.MIC, sizeof(stv_hsmic_hs.MIC)); + result = -EINVAL; + } else + result = 0; + return result; +} + +/* + * Test vectors for Key derivation + * + * These come from WUSB1.0[6.5.1], the vectors in WUSB1.0[A.1] + * (errata corrected in 2005/07). + */ +static const u8 stv_key_a1[16] __attribute__ ((__aligned__(4))) = { + 0xf0, 0xe1, 0xd2, 0xc3, 0xb4, 0xa5, 0x96, 0x87, + 0x78, 0x69, 0x5a, 0x4b, 0x3c, 0x2d, 0x1e, 0x0f +}; + +static const struct aes_ccm_nonce stv_keydvt_n_a1 = { + .sfn = { 0 }, + .tkid = { 0x76, 0x98, 0x01, }, + .dest_addr = { .data = { 0xbe, 0x00 } }, + .src_addr = { .data = { 0x76, 0x98 } }, +}; + +static const struct wusb_keydvt_out stv_keydvt_out_a1 = { + .kck = { + 0x4b, 0x79, 0xa3, 0xcf, 0xe5, 0x53, 0x23, 0x9d, + 0xd7, 0xc1, 0x6d, 0x1c, 0x2d, 0xab, 0x6d, 0x3f + }, + .ptk = { + 0xc8, 0x70, 0x62, 0x82, 0xb6, 0x7c, 0xe9, 0x06, + 0x7b, 0xc5, 0x25, 0x69, 0xf2, 0x36, 0x61, 0x2d + } +}; + +/* + * Performa a test to make sure we match the vectors defined in + * WUSB1.0[A.1](Errata2006/12) + */ +static int wusb_key_derive_verify(void) +{ + int result = 0; + struct wusb_keydvt_out keydvt_out; + /* These come from WUSB1.0[A.1] + 2006/12 errata + * NOTE: can't make this const or global -- somehow it seems + * the scatterlists for crypto get confused and we get + * bad data. There is no doc on this... */ + struct wusb_keydvt_in stv_keydvt_in_a1 = { + .hnonce = { + 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17, + 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f + }, + .dnonce = { + 0x20, 0x21, 0x22, 0x23, 0x24, 0x25, 0x26, 0x27, + 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f + } + }; + + result = wusb_key_derive(&keydvt_out, stv_key_a1, &stv_keydvt_n_a1, + &stv_keydvt_in_a1); + if (result < 0) + printk(KERN_ERR "E: WUSB key derivation test: " + "derivation failed: %d\n", result); + if (memcmp(&stv_keydvt_out_a1, &keydvt_out, sizeof(keydvt_out))) { + printk(KERN_ERR "E: WUSB key derivation test: " + "mismatch between key derivation result " + "and WUSB1.0[A1] Errata 2006/12\n"); + printk(KERN_ERR "E: keydvt in: key (%zu bytes)\n", + sizeof(stv_key_a1)); + dump_bytes(NULL, stv_key_a1, sizeof(stv_key_a1)); + printk(KERN_ERR "E: keydvt in: nonce (%zu bytes)\n", + sizeof(stv_keydvt_n_a1)); + dump_bytes(NULL, &stv_keydvt_n_a1, sizeof(stv_keydvt_n_a1)); + printk(KERN_ERR "E: keydvt in: hnonce & dnonce (%zu bytes)\n", + sizeof(stv_keydvt_in_a1)); + dump_bytes(NULL, &stv_keydvt_in_a1, sizeof(stv_keydvt_in_a1)); + printk(KERN_ERR "E: keydvt out: KCK\n"); + dump_bytes(NULL, &keydvt_out.kck, sizeof(keydvt_out.kck)); + printk(KERN_ERR "E: keydvt out: PTK\n"); + dump_bytes(NULL, &keydvt_out.ptk, sizeof(keydvt_out.ptk)); + result = -EINVAL; + } else + result = 0; + return result; +} + +/* + * Initialize crypto system + * + * FIXME: we do nothing now, other than verifying. Later on we'll + * cache the encryption stuff, so that's why we have a separate init. + */ +int wusb_crypto_init(void) +{ + int result; + + result = wusb_key_derive_verify(); + if (result < 0) + return result; + return wusb_oob_mic_verify(); +} + +void wusb_crypto_exit(void) +{ + /* FIXME: free cached crypto transforms */ +} diff --git a/drivers/usb/wusbcore/dev-sysfs.c b/drivers/usb/wusbcore/dev-sysfs.c new file mode 100644 index 000000000000..7897a19652e5 --- /dev/null +++ b/drivers/usb/wusbcore/dev-sysfs.c @@ -0,0 +1,143 @@ +/* + * WUSB devices + * sysfs bindings + * + * Copyright (C) 2007 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Get them out of the way... + */ + +#include <linux/jiffies.h> +#include <linux/ctype.h> +#include <linux/workqueue.h> +#include "wusbhc.h" + +#undef D_LOCAL +#define D_LOCAL 4 +#include <linux/uwb/debug.h> + +static ssize_t wusb_disconnect_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct usb_device *usb_dev; + struct wusbhc *wusbhc; + unsigned command; + u8 port_idx; + + if (sscanf(buf, "%u", &command) != 1) + return -EINVAL; + if (command == 0) + return size; + usb_dev = to_usb_device(dev); + wusbhc = wusbhc_get_by_usb_dev(usb_dev); + if (wusbhc == NULL) + return -ENODEV; + + mutex_lock(&wusbhc->mutex); + port_idx = wusb_port_no_to_idx(usb_dev->portnum); + __wusbhc_dev_disable(wusbhc, port_idx); + mutex_unlock(&wusbhc->mutex); + wusbhc_put(wusbhc); + return size; +} +static DEVICE_ATTR(wusb_disconnect, 0200, NULL, wusb_disconnect_store); + +static ssize_t wusb_cdid_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + ssize_t result; + struct wusb_dev *wusb_dev; + + wusb_dev = wusb_dev_get_by_usb_dev(to_usb_device(dev)); + if (wusb_dev == NULL) + return -ENODEV; + result = ckhdid_printf(buf, PAGE_SIZE, &wusb_dev->cdid); + strcat(buf, "\n"); + wusb_dev_put(wusb_dev); + return result + 1; +} +static DEVICE_ATTR(wusb_cdid, 0444, wusb_cdid_show, NULL); + +static ssize_t wusb_ck_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + int result; + struct usb_device *usb_dev; + struct wusbhc *wusbhc; + struct wusb_ckhdid ck; + + result = sscanf(buf, + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx\n", + &ck.data[0] , &ck.data[1], + &ck.data[2] , &ck.data[3], + &ck.data[4] , &ck.data[5], + &ck.data[6] , &ck.data[7], + &ck.data[8] , &ck.data[9], + &ck.data[10], &ck.data[11], + &ck.data[12], &ck.data[13], + &ck.data[14], &ck.data[15]); + if (result != 16) + return -EINVAL; + + usb_dev = to_usb_device(dev); + wusbhc = wusbhc_get_by_usb_dev(usb_dev); + if (wusbhc == NULL) + return -ENODEV; + result = wusb_dev_4way_handshake(wusbhc, usb_dev->wusb_dev, &ck); + memset(&ck, 0, sizeof(ck)); + wusbhc_put(wusbhc); + return result < 0 ? result : size; +} +static DEVICE_ATTR(wusb_ck, 0200, NULL, wusb_ck_store); + +static struct attribute *wusb_dev_attrs[] = { + &dev_attr_wusb_disconnect.attr, + &dev_attr_wusb_cdid.attr, + &dev_attr_wusb_ck.attr, + NULL, +}; + +static struct attribute_group wusb_dev_attr_group = { + .name = NULL, /* we want them in the same directory */ + .attrs = wusb_dev_attrs, +}; + +int wusb_dev_sysfs_add(struct wusbhc *wusbhc, struct usb_device *usb_dev, + struct wusb_dev *wusb_dev) +{ + int result = sysfs_create_group(&usb_dev->dev.kobj, + &wusb_dev_attr_group); + struct device *dev = &usb_dev->dev; + if (result < 0) + dev_err(dev, "Cannot register WUSB-dev attributes: %d\n", + result); + return result; +} + +void wusb_dev_sysfs_rm(struct wusb_dev *wusb_dev) +{ + struct usb_device *usb_dev = wusb_dev->usb_dev; + if (usb_dev) + sysfs_remove_group(&usb_dev->dev.kobj, &wusb_dev_attr_group); +} diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c new file mode 100644 index 000000000000..f45d777bef34 --- /dev/null +++ b/drivers/usb/wusbcore/devconnect.c @@ -0,0 +1,1297 @@ +/* + * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8]) + * Device Connect handling + * + * Copyright (C) 2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + * FIXME: this file needs to be broken up, it's grown too big + * + * + * WUSB1.0[7.1, 7.5.1, ] + * + * WUSB device connection is kind of messy. Some background: + * + * When a device wants to connect it scans the UWB radio channels + * looking for a WUSB Channel; a WUSB channel is defined by MMCs + * (Micro Managed Commands or something like that) [see + * Design-overview for more on this] . + * + * So, device scans the radio, finds MMCs and thus a host and checks + * when the next DNTS is. It sends a Device Notification Connect + * (DN_Connect); the host picks it up (through nep.c and notif.c, ends + * up in wusb_devconnect_ack(), which creates a wusb_dev structure in + * wusbhc->port[port_number].wusb_dev), assigns an unauth address + * to the device (this means from 0x80 to 0xfe) and sends, in the MMC + * a Connect Ack Information Element (ConnAck IE). + * + * So now the device now has a WUSB address. From now on, we use + * that to talk to it in the RPipes. + * + * ASSUMPTIONS: + * + * - We use the the as device address the port number where it is + * connected (port 0 doesn't exist). For unauth, it is 128 + that. + * + * ROADMAP: + * + * This file contains the logic for doing that--entry points: + * + * wusb_devconnect_ack() Ack a device until _acked() called. + * Called by notif.c:wusb_handle_dn_connect() + * when a DN_Connect is received. + * + * wusbhc_devconnect_auth() Called by rh.c:wusbhc_rh_port_reset() when + * doing the device connect sequence. + * + * wusb_devconnect_acked() Ack done, release resources. + * + * wusb_handle_dn_alive() Called by notif.c:wusb_handle_dn() + * for processing a DN_Alive pong from a device. + * + * wusb_handle_dn_disconnect()Called by notif.c:wusb_handle_dn() to + * process a disconenct request from a + * device. + * + * wusb_dev_reset() Called by rh.c:wusbhc_rh_port_reset() when + * resetting a device. + * + * __wusb_dev_disable() Called by rh.c:wusbhc_rh_clear_port_feat() when + * disabling a port. + * + * wusb_devconnect_create() Called when creating the host by + * lc.c:wusbhc_create(). + * + * wusb_devconnect_destroy() Cleanup called removing the host. Called + * by lc.c:wusbhc_destroy(). + * + * Each Wireless USB host maintains a list of DN_Connect requests + * (actually we maintain a list of pending Connect Acks, the + * wusbhc->ca_list). + * + * LIFE CYCLE OF port->wusb_dev + * + * Before the @wusbhc structure put()s the reference it owns for + * port->wusb_dev [and clean the wusb_dev pointer], it needs to + * lock @wusbhc->mutex. + */ + +#include <linux/jiffies.h> +#include <linux/ctype.h> +#include <linux/workqueue.h> +#include "wusbhc.h" + +#undef D_LOCAL +#define D_LOCAL 1 +#include <linux/uwb/debug.h> + +static void wusbhc_devconnect_acked_work(struct work_struct *work); + +static void wusb_dev_free(struct wusb_dev *wusb_dev) +{ + if (wusb_dev) { + kfree(wusb_dev->set_gtk_req); + usb_free_urb(wusb_dev->set_gtk_urb); + kfree(wusb_dev); + } +} + +static struct wusb_dev *wusb_dev_alloc(struct wusbhc *wusbhc) +{ + struct wusb_dev *wusb_dev; + struct urb *urb; + struct usb_ctrlrequest *req; + + wusb_dev = kzalloc(sizeof(*wusb_dev), GFP_KERNEL); + if (wusb_dev == NULL) + goto err; + + wusb_dev->wusbhc = wusbhc; + + INIT_WORK(&wusb_dev->devconnect_acked_work, wusbhc_devconnect_acked_work); + + urb = usb_alloc_urb(0, GFP_KERNEL); + if (urb == NULL) + goto err; + + req = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL); + if (req == NULL) + goto err; + + req->bRequestType = USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE; + req->bRequest = USB_REQ_SET_DESCRIPTOR; + req->wValue = cpu_to_le16(USB_DT_KEY << 8 | wusbhc->gtk_index); + req->wIndex = 0; + req->wLength = cpu_to_le16(wusbhc->gtk.descr.bLength); + + wusb_dev->set_gtk_urb = urb; + wusb_dev->set_gtk_req = req; + + return wusb_dev; +err: + wusb_dev_free(wusb_dev); + return NULL; +} + + +/* + * Using the Connect-Ack list, fill out the @wusbhc Connect-Ack WUSB IE + * properly so that it can be added to the MMC. + * + * We just get the @wusbhc->ca_list and fill out the first four ones or + * less (per-spec WUSB1.0[7.5, before T7-38). If the ConnectAck WUSB + * IE is not allocated, we alloc it. + * + * @wusbhc->mutex must be taken + */ +static void wusbhc_fill_cack_ie(struct wusbhc *wusbhc) +{ + unsigned cnt; + struct wusb_dev *dev_itr; + struct wuie_connect_ack *cack_ie; + + cack_ie = &wusbhc->cack_ie; + cnt = 0; + list_for_each_entry(dev_itr, &wusbhc->cack_list, cack_node) { + cack_ie->blk[cnt].CDID = dev_itr->cdid; + cack_ie->blk[cnt].bDeviceAddress = dev_itr->addr; + if (++cnt >= WUIE_ELT_MAX) + break; + } + cack_ie->hdr.bLength = sizeof(cack_ie->hdr) + + cnt * sizeof(cack_ie->blk[0]); +} + +/* + * Register a new device that wants to connect + * + * A new device wants to connect, so we add it to the Connect-Ack + * list. We give it an address in the unauthorized range (bit 8 set); + * user space will have to drive authorization further on. + * + * @dev_addr: address to use for the device (which is also the port + * number). + * + * @wusbhc->mutex must be taken + */ +static struct wusb_dev *wusbhc_cack_add(struct wusbhc *wusbhc, + struct wusb_dn_connect *dnc, + const char *pr_cdid, u8 port_idx) +{ + struct device *dev = wusbhc->dev; + struct wusb_dev *wusb_dev; + int new_connection = wusb_dn_connect_new_connection(dnc); + u8 dev_addr; + int result; + + /* Is it registered already? */ + list_for_each_entry(wusb_dev, &wusbhc->cack_list, cack_node) + if (!memcmp(&wusb_dev->cdid, &dnc->CDID, + sizeof(wusb_dev->cdid))) + return wusb_dev; + /* We don't have it, create an entry, register it */ + wusb_dev = wusb_dev_alloc(wusbhc); + if (wusb_dev == NULL) + return NULL; + wusb_dev_init(wusb_dev); + wusb_dev->cdid = dnc->CDID; + wusb_dev->port_idx = port_idx; + + /* + * Devices are always available within the cluster reservation + * and since the hardware will take the intersection of the + * per-device availability and the cluster reservation, the + * per-device availability can simply be set to always + * available. + */ + bitmap_fill(wusb_dev->availability.bm, UWB_NUM_MAS); + + /* FIXME: handle reconnects instead of assuming connects are + always new. */ + if (1 && new_connection == 0) + new_connection = 1; + if (new_connection) { + dev_addr = (port_idx + 2) | WUSB_DEV_ADDR_UNAUTH; + + dev_info(dev, "Connecting new WUSB device to address %u, " + "port %u\n", dev_addr, port_idx); + + result = wusb_set_dev_addr(wusbhc, wusb_dev, dev_addr); + if (result < 0) + return NULL; + } + wusb_dev->entry_ts = jiffies; + list_add_tail(&wusb_dev->cack_node, &wusbhc->cack_list); + wusbhc->cack_count++; + wusbhc_fill_cack_ie(wusbhc); + return wusb_dev; +} + +/* + * Remove a Connect-Ack context entry from the HCs view + * + * @wusbhc->mutex must be taken + */ +static void wusbhc_cack_rm(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) +{ + struct device *dev = wusbhc->dev; + d_fnstart(3, dev, "(wusbhc %p wusb_dev %p)\n", wusbhc, wusb_dev); + list_del_init(&wusb_dev->cack_node); + wusbhc->cack_count--; + wusbhc_fill_cack_ie(wusbhc); + d_fnend(3, dev, "(wusbhc %p wusb_dev %p) = void\n", wusbhc, wusb_dev); +} + +/* + * @wusbhc->mutex must be taken */ +static +void wusbhc_devconnect_acked(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) +{ + struct device *dev = wusbhc->dev; + d_fnstart(3, dev, "(wusbhc %p wusb_dev %p)\n", wusbhc, wusb_dev); + wusbhc_cack_rm(wusbhc, wusb_dev); + if (wusbhc->cack_count) + wusbhc_mmcie_set(wusbhc, 0, 0, &wusbhc->cack_ie.hdr); + else + wusbhc_mmcie_rm(wusbhc, &wusbhc->cack_ie.hdr); + d_fnend(3, dev, "(wusbhc %p wusb_dev %p) = void\n", wusbhc, wusb_dev); +} + +static void wusbhc_devconnect_acked_work(struct work_struct *work) +{ + struct wusb_dev *wusb_dev = container_of(work, struct wusb_dev, + devconnect_acked_work); + struct wusbhc *wusbhc = wusb_dev->wusbhc; + + mutex_lock(&wusbhc->mutex); + wusbhc_devconnect_acked(wusbhc, wusb_dev); + mutex_unlock(&wusbhc->mutex); +} + +/* + * Ack a device for connection + * + * FIXME: docs + * + * @pr_cdid: Printable CDID...hex Use @dnc->cdid for the real deal. + * + * So we get the connect ack IE (may have been allocated already), + * find an empty connect block, an empty virtual port, create an + * address with it (see below), make it an unauth addr [bit 7 set] and + * set the MMC. + * + * Addresses: because WUSB hosts have no downstream hubs, we can do a + * 1:1 mapping between 'port number' and device + * address. This simplifies many things, as during this + * initial connect phase the USB stack has no knoledge of + * the device and hasn't assigned an address yet--we know + * USB's choose_address() will use the same euristics we + * use here, so we can assume which address will be assigned. + * + * USB stack always assigns address 1 to the root hub, so + * to the port number we add 2 (thus virtual port #0 is + * addr #2). + * + * @wusbhc shall be referenced + */ +static +void wusbhc_devconnect_ack(struct wusbhc *wusbhc, struct wusb_dn_connect *dnc, + const char *pr_cdid) +{ + int result; + struct device *dev = wusbhc->dev; + struct wusb_dev *wusb_dev; + struct wusb_port *port; + unsigned idx, devnum; + + d_fnstart(3, dev, "(%p, %p, %s)\n", wusbhc, dnc, pr_cdid); + mutex_lock(&wusbhc->mutex); + + /* Check we are not handling it already */ + for (idx = 0; idx < wusbhc->ports_max; idx++) { + port = wusb_port_by_idx(wusbhc, idx); + if (port->wusb_dev + && memcmp(&dnc->CDID, &port->wusb_dev->cdid, sizeof(dnc->CDID)) == 0) + goto error_unlock; + } + /* Look up those fake ports we have for a free one */ + for (idx = 0; idx < wusbhc->ports_max; idx++) { + port = wusb_port_by_idx(wusbhc, idx); + if ((port->status & USB_PORT_STAT_POWER) + && !(port->status & USB_PORT_STAT_CONNECTION)) + break; + } + if (idx >= wusbhc->ports_max) { + dev_err(dev, "Host controller can't connect more devices " + "(%u already connected); device %s rejected\n", + wusbhc->ports_max, pr_cdid); + /* NOTE: we could send a WUIE_Disconnect here, but we haven't + * event acked, so the device will eventually timeout the + * connection, right? */ + goto error_unlock; + } + + devnum = idx + 2; + + /* Make sure we are using no crypto on that "virtual port" */ + wusbhc->set_ptk(wusbhc, idx, 0, NULL, 0); + + /* Grab a filled in Connect-Ack context, fill out the + * Connect-Ack Wireless USB IE, set the MMC */ + wusb_dev = wusbhc_cack_add(wusbhc, dnc, pr_cdid, idx); + if (wusb_dev == NULL) + goto error_unlock; + result = wusbhc_mmcie_set(wusbhc, 0, 0, &wusbhc->cack_ie.hdr); + if (result < 0) + goto error_unlock; + /* Give the device at least 2ms (WUSB1.0[7.5.1p3]), let's do + * three for a good measure */ + msleep(3); + port->wusb_dev = wusb_dev; + port->status |= USB_PORT_STAT_CONNECTION; + port->change |= USB_PORT_STAT_C_CONNECTION; + port->reset_count = 0; + /* Now the port status changed to connected; khubd will + * pick the change up and try to reset the port to bring it to + * the enabled state--so this process returns up to the stack + * and it calls back into wusbhc_rh_port_reset() who will call + * devconnect_auth(). + */ +error_unlock: + mutex_unlock(&wusbhc->mutex); + d_fnend(3, dev, "(%p, %p, %s) = void\n", wusbhc, dnc, pr_cdid); + return; + +} + +/* + * Disconnect a Wireless USB device from its fake port + * + * Marks the port as disconnected so that khubd can pick up the change + * and drops our knowledge about the device. + * + * Assumes there is a device connected + * + * @port_index: zero based port number + * + * NOTE: @wusbhc->mutex is locked + * + * WARNING: From here it is not very safe to access anything hanging off + * wusb_dev + */ +static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc, + struct wusb_port *port) +{ + struct device *dev = wusbhc->dev; + struct wusb_dev *wusb_dev = port->wusb_dev; + + d_fnstart(3, dev, "(wusbhc %p, port %p)\n", wusbhc, port); + port->status &= ~(USB_PORT_STAT_CONNECTION | USB_PORT_STAT_ENABLE + | USB_PORT_STAT_SUSPEND | USB_PORT_STAT_RESET + | USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED); + port->change |= USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE; + if (wusb_dev) { + if (!list_empty(&wusb_dev->cack_node)) + list_del_init(&wusb_dev->cack_node); + /* For the one in cack_add() */ + wusb_dev_put(wusb_dev); + } + port->wusb_dev = NULL; + /* don't reset the reset_count to zero or wusbhc_rh_port_reset will get + * confused! We only reset to zero when we connect a new device. + */ + + /* After a device disconnects, change the GTK (see [WUSB] + * section 6.2.11.2). */ + wusbhc_gtk_rekey(wusbhc); + + d_fnend(3, dev, "(wusbhc %p, port %p) = void\n", wusbhc, port); + /* The Wireless USB part has forgotten about the device already; now + * khubd's timer will pick up the disconnection and remove the USB + * device from the system + */ +} + +/* + * Authenticate a device into the WUSB Cluster + * + * Called from the Root Hub code (rh.c:wusbhc_rh_port_reset()) when + * asking for a reset on a port that is not enabled (ie: first connect + * on the port). + * + * Performs the 4way handshake to allow the device to comunicate w/ the + * WUSB Cluster securely; once done, issue a request to the device for + * it to change to address 0. + * + * This mimics the reset step of Wired USB that once resetting a + * device, leaves the port in enabled state and the dev with the + * default address (0). + * + * WUSB1.0[7.1.2] + * + * @port_idx: port where the change happened--This is the index into + * the wusbhc port array, not the USB port number. + */ +int wusbhc_devconnect_auth(struct wusbhc *wusbhc, u8 port_idx) +{ + struct device *dev = wusbhc->dev; + struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx); + + d_fnstart(3, dev, "(%p, %u)\n", wusbhc, port_idx); + port->status &= ~USB_PORT_STAT_RESET; + port->status |= USB_PORT_STAT_ENABLE; + port->change |= USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_ENABLE; + d_fnend(3, dev, "(%p, %u) = 0\n", wusbhc, port_idx); + return 0; +} + +/* + * Refresh the list of keep alives to emit in the MMC + * + * Some devices don't respond to keep alives unless they've been + * authenticated, so skip unauthenticated devices. + * + * We only publish the first four devices that have a coming timeout + * condition. Then when we are done processing those, we go for the + * next ones. We ignore the ones that have timed out already (they'll + * be purged). + * + * This might cause the first devices to timeout the last devices in + * the port array...FIXME: come up with a better algorithm? + * + * Note we can't do much about MMC's ops errors; we hope next refresh + * will kind of handle it. + * + * NOTE: @wusbhc->mutex is locked + */ +static void __wusbhc_keep_alive(struct wusbhc *wusbhc) +{ + struct device *dev = wusbhc->dev; + unsigned cnt; + struct wusb_dev *wusb_dev; + struct wusb_port *wusb_port; + struct wuie_keep_alive *ie = &wusbhc->keep_alive_ie; + unsigned keep_alives, old_keep_alives; + + old_keep_alives = ie->hdr.bLength - sizeof(ie->hdr); + keep_alives = 0; + for (cnt = 0; + keep_alives <= WUIE_ELT_MAX && cnt < wusbhc->ports_max; + cnt++) { + unsigned tt = msecs_to_jiffies(wusbhc->trust_timeout); + + wusb_port = wusb_port_by_idx(wusbhc, cnt); + wusb_dev = wusb_port->wusb_dev; + + if (wusb_dev == NULL) + continue; + if (wusb_dev->usb_dev == NULL || !wusb_dev->usb_dev->authenticated) + continue; + + if (time_after(jiffies, wusb_dev->entry_ts + tt)) { + dev_err(dev, "KEEPALIVE: device %u timed out\n", + wusb_dev->addr); + __wusbhc_dev_disconnect(wusbhc, wusb_port); + } else if (time_after(jiffies, wusb_dev->entry_ts + tt/2)) { + /* Approaching timeout cut out, need to refresh */ + ie->bDeviceAddress[keep_alives++] = wusb_dev->addr; + } + } + if (keep_alives & 0x1) /* pad to even number ([WUSB] section 7.5.9) */ + ie->bDeviceAddress[keep_alives++] = 0x7f; + ie->hdr.bLength = sizeof(ie->hdr) + + keep_alives*sizeof(ie->bDeviceAddress[0]); + if (keep_alives > 0) + wusbhc_mmcie_set(wusbhc, 10, 5, &ie->hdr); + else if (old_keep_alives != 0) + wusbhc_mmcie_rm(wusbhc, &ie->hdr); +} + +/* + * Do a run through all devices checking for timeouts + */ +static void wusbhc_keep_alive_run(struct work_struct *ws) +{ + struct delayed_work *dw = + container_of(ws, struct delayed_work, work); + struct wusbhc *wusbhc = + container_of(dw, struct wusbhc, keep_alive_timer); + + d_fnstart(5, wusbhc->dev, "(wusbhc %p)\n", wusbhc); + if (wusbhc->active) { + mutex_lock(&wusbhc->mutex); + __wusbhc_keep_alive(wusbhc); + mutex_unlock(&wusbhc->mutex); + queue_delayed_work(wusbd, &wusbhc->keep_alive_timer, + (wusbhc->trust_timeout * CONFIG_HZ)/1000/2); + } + d_fnend(5, wusbhc->dev, "(wusbhc %p) = void\n", wusbhc); + return; +} + +/* + * Find the wusb_dev from its device address. + * + * The device can be found directly from the address (see + * wusb_cack_add() for where the device address is set to port_idx + * +2), except when the address is zero. + */ +static struct wusb_dev *wusbhc_find_dev_by_addr(struct wusbhc *wusbhc, u8 addr) +{ + int p; + + if (addr == 0xff) /* unconnected */ + return NULL; + + if (addr > 0) { + int port = (addr & ~0x80) - 2; + if (port < 0 || port >= wusbhc->ports_max) + return NULL; + return wusb_port_by_idx(wusbhc, port)->wusb_dev; + } + + /* Look for the device with address 0. */ + for (p = 0; p < wusbhc->ports_max; p++) { + struct wusb_dev *wusb_dev = wusb_port_by_idx(wusbhc, p)->wusb_dev; + if (wusb_dev && wusb_dev->addr == addr) + return wusb_dev; + } + return NULL; +} + +/* + * Handle a DN_Alive notification (WUSB1.0[7.6.1]) + * + * This just updates the device activity timestamp and then refreshes + * the keep alive IE. + * + * @wusbhc shall be referenced and unlocked + */ +static void wusbhc_handle_dn_alive(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) +{ + struct device *dev = wusbhc->dev; + + d_printf(2, dev, "DN ALIVE: device 0x%02x pong\n", wusb_dev->addr); + + mutex_lock(&wusbhc->mutex); + wusb_dev->entry_ts = jiffies; + __wusbhc_keep_alive(wusbhc); + mutex_unlock(&wusbhc->mutex); +} + +/* + * Handle a DN_Connect notification (WUSB1.0[7.6.1]) + * + * @wusbhc + * @pkt_hdr + * @size: Size of the buffer where the notification resides; if the + * notification data suggests there should be more data than + * available, an error will be signaled and the whole buffer + * consumed. + * + * @wusbhc->mutex shall be held + */ +static void wusbhc_handle_dn_connect(struct wusbhc *wusbhc, + struct wusb_dn_hdr *dn_hdr, + size_t size) +{ + struct device *dev = wusbhc->dev; + struct wusb_dn_connect *dnc; + char pr_cdid[WUSB_CKHDID_STRSIZE]; + static const char *beacon_behaviour[] = { + "reserved", + "self-beacon", + "directed-beacon", + "no-beacon" + }; + + d_fnstart(3, dev, "(%p, %p, %zu)\n", wusbhc, dn_hdr, size); + if (size < sizeof(*dnc)) { + dev_err(dev, "DN CONNECT: short notification (%zu < %zu)\n", + size, sizeof(*dnc)); + goto out; + } + + dnc = container_of(dn_hdr, struct wusb_dn_connect, hdr); + ckhdid_printf(pr_cdid, sizeof(pr_cdid), &dnc->CDID); + dev_info(dev, "DN CONNECT: device %s @ %x (%s) wants to %s\n", + pr_cdid, + wusb_dn_connect_prev_dev_addr(dnc), + beacon_behaviour[wusb_dn_connect_beacon_behavior(dnc)], + wusb_dn_connect_new_connection(dnc) ? "connect" : "reconnect"); + /* ACK the connect */ + wusbhc_devconnect_ack(wusbhc, dnc, pr_cdid); +out: + d_fnend(3, dev, "(%p, %p, %zu) = void\n", + wusbhc, dn_hdr, size); + return; +} + +/* + * Handle a DN_Disconnect notification (WUSB1.0[7.6.1]) + * + * Device is going down -- do the disconnect. + * + * @wusbhc shall be referenced and unlocked + */ +static void wusbhc_handle_dn_disconnect(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) +{ + struct device *dev = wusbhc->dev; + + dev_info(dev, "DN DISCONNECT: device 0x%02x going down\n", wusb_dev->addr); + + mutex_lock(&wusbhc->mutex); + __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, wusb_dev->port_idx)); + mutex_unlock(&wusbhc->mutex); +} + +/* + * Reset a WUSB device on a HWA + * + * @wusbhc + * @port_idx Index of the port where the device is + * + * In Wireless USB, a reset is more or less equivalent to a full + * disconnect; so we just do a full disconnect and send the device a + * Device Reset IE (WUSB1.0[7.5.11]) giving it a few millisecs (6 MMCs). + * + * @wusbhc should be refcounted and unlocked + */ +int wusbhc_dev_reset(struct wusbhc *wusbhc, u8 port_idx) +{ + int result; + struct device *dev = wusbhc->dev; + struct wusb_dev *wusb_dev; + struct wuie_reset *ie; + + d_fnstart(3, dev, "(%p, %u)\n", wusbhc, port_idx); + mutex_lock(&wusbhc->mutex); + result = 0; + wusb_dev = wusb_port_by_idx(wusbhc, port_idx)->wusb_dev; + if (wusb_dev == NULL) { + /* reset no device? ignore */ + dev_dbg(dev, "RESET: no device at port %u, ignoring\n", + port_idx); + goto error_unlock; + } + result = -ENOMEM; + ie = kzalloc(sizeof(*ie), GFP_KERNEL); + if (ie == NULL) + goto error_unlock; + ie->hdr.bLength = sizeof(ie->hdr) + sizeof(ie->CDID); + ie->hdr.bIEIdentifier = WUIE_ID_RESET_DEVICE; + ie->CDID = wusb_dev->cdid; + result = wusbhc_mmcie_set(wusbhc, 0xff, 6, &ie->hdr); + if (result < 0) { + dev_err(dev, "RESET: cant's set MMC: %d\n", result); + goto error_kfree; + } + __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, port_idx)); + + /* 120ms, hopefully 6 MMCs (FIXME) */ + msleep(120); + wusbhc_mmcie_rm(wusbhc, &ie->hdr); +error_kfree: + kfree(ie); +error_unlock: + mutex_unlock(&wusbhc->mutex); + d_fnend(3, dev, "(%p, %u) = %d\n", wusbhc, port_idx, result); + return result; +} + +/* + * Handle a Device Notification coming a host + * + * The Device Notification comes from a host (HWA, DWA or WHCI) + * wrapped in a set of headers. Somebody else has peeled off those + * headers for us and we just get one Device Notifications. + * + * Invalid DNs (e.g., too short) are discarded. + * + * @wusbhc shall be referenced + * + * FIXMES: + * - implement priorities as in WUSB1.0[Table 7-55]? + */ +void wusbhc_handle_dn(struct wusbhc *wusbhc, u8 srcaddr, + struct wusb_dn_hdr *dn_hdr, size_t size) +{ + struct device *dev = wusbhc->dev; + struct wusb_dev *wusb_dev; + + d_fnstart(3, dev, "(%p, %p)\n", wusbhc, dn_hdr); + + if (size < sizeof(struct wusb_dn_hdr)) { + dev_err(dev, "DN data shorter than DN header (%d < %d)\n", + (int)size, (int)sizeof(struct wusb_dn_hdr)); + goto out; + } + + wusb_dev = wusbhc_find_dev_by_addr(wusbhc, srcaddr); + if (wusb_dev == NULL && dn_hdr->bType != WUSB_DN_CONNECT) { + dev_dbg(dev, "ignoring DN %d from unconnected device %02x\n", + dn_hdr->bType, srcaddr); + goto out; + } + + switch (dn_hdr->bType) { + case WUSB_DN_CONNECT: + wusbhc_handle_dn_connect(wusbhc, dn_hdr, size); + break; + case WUSB_DN_ALIVE: + wusbhc_handle_dn_alive(wusbhc, wusb_dev); + break; + case WUSB_DN_DISCONNECT: + wusbhc_handle_dn_disconnect(wusbhc, wusb_dev); + break; + case WUSB_DN_MASAVAILCHANGED: + case WUSB_DN_RWAKE: + case WUSB_DN_SLEEP: + /* FIXME: handle these DNs. */ + break; + case WUSB_DN_EPRDY: + /* The hardware handles these. */ + break; + default: + dev_warn(dev, "unknown DN %u (%d octets) from %u\n", + dn_hdr->bType, (int)size, srcaddr); + } +out: + d_fnend(3, dev, "(%p, %p) = void\n", wusbhc, dn_hdr); + return; +} +EXPORT_SYMBOL_GPL(wusbhc_handle_dn); + +/* + * Disconnect a WUSB device from a the cluster + * + * @wusbhc + * @port Fake port where the device is (wusbhc index, not USB port number). + * + * In Wireless USB, a disconnect is basically telling the device he is + * being disconnected and forgetting about him. + * + * We send the device a Device Disconnect IE (WUSB1.0[7.5.11]) for 100 + * ms and then keep going. + * + * We don't do much in case of error; we always pretend we disabled + * the port and disconnected the device. If physically the request + * didn't get there (many things can fail in the way there), the stack + * will reject the device's communication attempts. + * + * @wusbhc should be refcounted and locked + */ +void __wusbhc_dev_disable(struct wusbhc *wusbhc, u8 port_idx) +{ + int result; + struct device *dev = wusbhc->dev; + struct wusb_dev *wusb_dev; + struct wuie_disconnect *ie; + + d_fnstart(3, dev, "(%p, %u)\n", wusbhc, port_idx); + result = 0; + wusb_dev = wusb_port_by_idx(wusbhc, port_idx)->wusb_dev; + if (wusb_dev == NULL) { + /* reset no device? ignore */ + dev_dbg(dev, "DISCONNECT: no device at port %u, ignoring\n", + port_idx); + goto error; + } + __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, port_idx)); + + result = -ENOMEM; + ie = kzalloc(sizeof(*ie), GFP_KERNEL); + if (ie == NULL) + goto error; + ie->hdr.bLength = sizeof(*ie); + ie->hdr.bIEIdentifier = WUIE_ID_DEVICE_DISCONNECT; + ie->bDeviceAddress = wusb_dev->addr; + result = wusbhc_mmcie_set(wusbhc, 0, 0, &ie->hdr); + if (result < 0) { + dev_err(dev, "DISCONNECT: can't set MMC: %d\n", result); + goto error_kfree; + } + + /* 120ms, hopefully 6 MMCs */ + msleep(100); + wusbhc_mmcie_rm(wusbhc, &ie->hdr); +error_kfree: + kfree(ie); +error: + d_fnend(3, dev, "(%p, %u) = %d\n", wusbhc, port_idx, result); + return; +} + +static void wusb_cap_descr_printf(const unsigned level, struct device *dev, + const struct usb_wireless_cap_descriptor *wcd) +{ + d_printf(level, dev, + "WUSB Capability Descriptor\n" + " bDevCapabilityType 0x%02x\n" + " bmAttributes 0x%02x\n" + " wPhyRates 0x%04x\n" + " bmTFITXPowerInfo 0x%02x\n" + " bmFFITXPowerInfo 0x%02x\n" + " bmBandGroup 0x%04x\n" + " bReserved 0x%02x\n", + wcd->bDevCapabilityType, + wcd->bmAttributes, + le16_to_cpu(wcd->wPHYRates), + wcd->bmTFITXPowerInfo, + wcd->bmFFITXPowerInfo, + wcd->bmBandGroup, + wcd->bReserved); +} + +/* + * Walk over the BOS descriptor, verify and grok it + * + * @usb_dev: referenced + * @wusb_dev: referenced and unlocked + * + * The BOS descriptor is defined at WUSB1.0[7.4.1], and it defines a + * "flexible" way to wrap all kinds of descriptors inside an standard + * descriptor (wonder why they didn't use normal descriptors, + * btw). Not like they lack code. + * + * At the end we go to look for the WUSB Device Capabilities + * (WUSB1.0[7.4.1.1]) that is wrapped in a device capability descriptor + * that is part of the BOS descriptor set. That tells us what does the + * device support (dual role, beacon type, UWB PHY rates). + */ +static int wusb_dev_bos_grok(struct usb_device *usb_dev, + struct wusb_dev *wusb_dev, + struct usb_bos_descriptor *bos, size_t desc_size) +{ + ssize_t result; + struct device *dev = &usb_dev->dev; + void *itr, *top; + + /* Walk over BOS capabilities, verify them */ + itr = (void *)bos + sizeof(*bos); + top = itr + desc_size - sizeof(*bos); + while (itr < top) { + struct usb_dev_cap_header *cap_hdr = itr; + size_t cap_size; + u8 cap_type; + if (top - itr < sizeof(*cap_hdr)) { + dev_err(dev, "Device BUG? premature end of BOS header " + "data [offset 0x%02x]: only %zu bytes left\n", + (int)(itr - (void *)bos), top - itr); + result = -ENOSPC; + goto error_bad_cap; + } + cap_size = cap_hdr->bLength; + cap_type = cap_hdr->bDevCapabilityType; + d_printf(4, dev, "BOS Capability: 0x%02x (%zu bytes)\n", + cap_type, cap_size); + if (cap_size == 0) + break; + if (cap_size > top - itr) { + dev_err(dev, "Device BUG? premature end of BOS data " + "[offset 0x%02x cap %02x %zu bytes]: " + "only %zu bytes left\n", + (int)(itr - (void *)bos), + cap_type, cap_size, top - itr); + result = -EBADF; + goto error_bad_cap; + } + d_dump(3, dev, itr, cap_size); + switch (cap_type) { + case USB_CAP_TYPE_WIRELESS_USB: + if (cap_size != sizeof(*wusb_dev->wusb_cap_descr)) + dev_err(dev, "Device BUG? WUSB Capability " + "descriptor is %zu bytes vs %zu " + "needed\n", cap_size, + sizeof(*wusb_dev->wusb_cap_descr)); + else { + wusb_dev->wusb_cap_descr = itr; + wusb_cap_descr_printf(3, dev, itr); + } + break; + default: + dev_err(dev, "BUG? Unknown BOS capability 0x%02x " + "(%zu bytes) at offset 0x%02x\n", cap_type, + cap_size, (int)(itr - (void *)bos)); + } + itr += cap_size; + } + result = 0; +error_bad_cap: + return result; +} + +/* + * Add information from the BOS descriptors to the device + * + * @usb_dev: referenced + * @wusb_dev: referenced and unlocked + * + * So what we do is we alloc a space for the BOS descriptor of 64 + * bytes; read the first four bytes which include the wTotalLength + * field (WUSB1.0[T7-26]) and if it fits in those 64 bytes, read the + * whole thing. If not we realloc to that size. + * + * Then we call the groking function, that will fill up + * wusb_dev->wusb_cap_descr, which is what we'll need later on. + */ +static int wusb_dev_bos_add(struct usb_device *usb_dev, + struct wusb_dev *wusb_dev) +{ + ssize_t result; + struct device *dev = &usb_dev->dev; + struct usb_bos_descriptor *bos; + size_t alloc_size = 32, desc_size = 4; + + bos = kmalloc(alloc_size, GFP_KERNEL); + if (bos == NULL) + return -ENOMEM; + result = usb_get_descriptor(usb_dev, USB_DT_BOS, 0, bos, desc_size); + if (result < 4) { + dev_err(dev, "Can't get BOS descriptor or too short: %zd\n", + result); + goto error_get_descriptor; + } + desc_size = le16_to_cpu(bos->wTotalLength); + if (desc_size >= alloc_size) { + kfree(bos); + alloc_size = desc_size; + bos = kmalloc(alloc_size, GFP_KERNEL); + if (bos == NULL) + return -ENOMEM; + } + result = usb_get_descriptor(usb_dev, USB_DT_BOS, 0, bos, desc_size); + if (result < 0 || result != desc_size) { + dev_err(dev, "Can't get BOS descriptor or too short (need " + "%zu bytes): %zd\n", desc_size, result); + goto error_get_descriptor; + } + if (result < sizeof(*bos) + || le16_to_cpu(bos->wTotalLength) != desc_size) { + dev_err(dev, "Can't get BOS descriptor or too short (need " + "%zu bytes): %zd\n", desc_size, result); + goto error_get_descriptor; + } + d_printf(2, dev, "Got BOS descriptor %zd bytes, %u capabilities\n", + result, bos->bNumDeviceCaps); + d_dump(2, dev, bos, result); + result = wusb_dev_bos_grok(usb_dev, wusb_dev, bos, result); + if (result < 0) + goto error_bad_bos; + wusb_dev->bos = bos; + return 0; + +error_bad_bos: +error_get_descriptor: + kfree(bos); + wusb_dev->wusb_cap_descr = NULL; + return result; +} + +static void wusb_dev_bos_rm(struct wusb_dev *wusb_dev) +{ + kfree(wusb_dev->bos); + wusb_dev->wusb_cap_descr = NULL; +}; + +static struct usb_wireless_cap_descriptor wusb_cap_descr_default = { + .bLength = sizeof(wusb_cap_descr_default), + .bDescriptorType = USB_DT_DEVICE_CAPABILITY, + .bDevCapabilityType = USB_CAP_TYPE_WIRELESS_USB, + + .bmAttributes = USB_WIRELESS_BEACON_NONE, + .wPHYRates = cpu_to_le16(USB_WIRELESS_PHY_53), + .bmTFITXPowerInfo = 0, + .bmFFITXPowerInfo = 0, + .bmBandGroup = cpu_to_le16(0x0001), /* WUSB1.0[7.4.1] bottom */ + .bReserved = 0 +}; + +/* + * USB stack's device addition Notifier Callback + * + * Called from drivers/usb/core/hub.c when a new device is added; we + * use this hook to perform certain WUSB specific setup work on the + * new device. As well, it is the first time we can connect the + * wusb_dev and the usb_dev. So we note it down in wusb_dev and take a + * reference that we'll drop. + * + * First we need to determine if the device is a WUSB device (else we + * ignore it). For that we use the speed setting (USB_SPEED_VARIABLE) + * [FIXME: maybe we'd need something more definitive]. If so, we track + * it's usb_busd and from there, the WUSB HC. + * + * Because all WUSB HCs are contained in a 'struct wusbhc', voila, we + * get the wusbhc for the device. + * + * We have a reference on @usb_dev (as we are called at the end of its + * enumeration). + * + * NOTE: @usb_dev locked + */ +static void wusb_dev_add_ncb(struct usb_device *usb_dev) +{ + int result = 0; + struct wusb_dev *wusb_dev; + struct wusbhc *wusbhc; + struct device *dev = &usb_dev->dev; + u8 port_idx; + + if (usb_dev->wusb == 0 || usb_dev->devnum == 1) + return; /* skip non wusb and wusb RHs */ + + d_fnstart(3, dev, "(usb_dev %p)\n", usb_dev); + + wusbhc = wusbhc_get_by_usb_dev(usb_dev); + if (wusbhc == NULL) + goto error_nodev; + mutex_lock(&wusbhc->mutex); + wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, usb_dev); + port_idx = wusb_port_no_to_idx(usb_dev->portnum); + mutex_unlock(&wusbhc->mutex); + if (wusb_dev == NULL) + goto error_nodev; + wusb_dev->usb_dev = usb_get_dev(usb_dev); + usb_dev->wusb_dev = wusb_dev_get(wusb_dev); + result = wusb_dev_sec_add(wusbhc, usb_dev, wusb_dev); + if (result < 0) { + dev_err(dev, "Cannot enable security: %d\n", result); + goto error_sec_add; + } + /* Now query the device for it's BOS and attach it to wusb_dev */ + result = wusb_dev_bos_add(usb_dev, wusb_dev); + if (result < 0) { + dev_err(dev, "Cannot get BOS descriptors: %d\n", result); + goto error_bos_add; + } + result = wusb_dev_sysfs_add(wusbhc, usb_dev, wusb_dev); + if (result < 0) + goto error_add_sysfs; +out: + wusb_dev_put(wusb_dev); + wusbhc_put(wusbhc); +error_nodev: + d_fnend(3, dev, "(usb_dev %p) = void\n", usb_dev); + return; + + wusb_dev_sysfs_rm(wusb_dev); +error_add_sysfs: + wusb_dev_bos_rm(wusb_dev); +error_bos_add: + wusb_dev_sec_rm(wusb_dev); +error_sec_add: + mutex_lock(&wusbhc->mutex); + __wusbhc_dev_disconnect(wusbhc, wusb_port_by_idx(wusbhc, port_idx)); + mutex_unlock(&wusbhc->mutex); + goto out; +} + +/* + * Undo all the steps done at connection by the notifier callback + * + * NOTE: @usb_dev locked + */ +static void wusb_dev_rm_ncb(struct usb_device *usb_dev) +{ + struct wusb_dev *wusb_dev = usb_dev->wusb_dev; + + if (usb_dev->wusb == 0 || usb_dev->devnum == 1) + return; /* skip non wusb and wusb RHs */ + + wusb_dev_sysfs_rm(wusb_dev); + wusb_dev_bos_rm(wusb_dev); + wusb_dev_sec_rm(wusb_dev); + wusb_dev->usb_dev = NULL; + usb_dev->wusb_dev = NULL; + wusb_dev_put(wusb_dev); + usb_put_dev(usb_dev); +} + +/* + * Handle notifications from the USB stack (notifier call back) + * + * This is called when the USB stack does a + * usb_{bus,device}_{add,remove}() so we can do WUSB specific + * handling. It is called with [for the case of + * USB_DEVICE_{ADD,REMOVE} with the usb_dev locked. + */ +int wusb_usb_ncb(struct notifier_block *nb, unsigned long val, + void *priv) +{ + int result = NOTIFY_OK; + + switch (val) { + case USB_DEVICE_ADD: + wusb_dev_add_ncb(priv); + break; + case USB_DEVICE_REMOVE: + wusb_dev_rm_ncb(priv); + break; + case USB_BUS_ADD: + /* ignore (for now) */ + case USB_BUS_REMOVE: + break; + default: + WARN_ON(1); + result = NOTIFY_BAD; + }; + return result; +} + +/* + * Return a referenced wusb_dev given a @wusbhc and @usb_dev + */ +struct wusb_dev *__wusb_dev_get_by_usb_dev(struct wusbhc *wusbhc, + struct usb_device *usb_dev) +{ + struct wusb_dev *wusb_dev; + u8 port_idx; + + port_idx = wusb_port_no_to_idx(usb_dev->portnum); + BUG_ON(port_idx > wusbhc->ports_max); + wusb_dev = wusb_port_by_idx(wusbhc, port_idx)->wusb_dev; + if (wusb_dev != NULL) /* ops, device is gone */ + wusb_dev_get(wusb_dev); + return wusb_dev; +} +EXPORT_SYMBOL_GPL(__wusb_dev_get_by_usb_dev); + +void wusb_dev_destroy(struct kref *_wusb_dev) +{ + struct wusb_dev *wusb_dev + = container_of(_wusb_dev, struct wusb_dev, refcnt); + list_del_init(&wusb_dev->cack_node); + wusb_dev_free(wusb_dev); + d_fnend(1, NULL, "%s (wusb_dev %p) = void\n", __func__, wusb_dev); +} +EXPORT_SYMBOL_GPL(wusb_dev_destroy); + +/* + * Create all the device connect handling infrastructure + * + * This is basically the device info array, Connect Acknowledgement + * (cack) lists, keep-alive timers (and delayed work thread). + */ +int wusbhc_devconnect_create(struct wusbhc *wusbhc) +{ + d_fnstart(3, wusbhc->dev, "(wusbhc %p)\n", wusbhc); + + wusbhc->keep_alive_ie.hdr.bIEIdentifier = WUIE_ID_KEEP_ALIVE; + wusbhc->keep_alive_ie.hdr.bLength = sizeof(wusbhc->keep_alive_ie.hdr); + INIT_DELAYED_WORK(&wusbhc->keep_alive_timer, wusbhc_keep_alive_run); + + wusbhc->cack_ie.hdr.bIEIdentifier = WUIE_ID_CONNECTACK; + wusbhc->cack_ie.hdr.bLength = sizeof(wusbhc->cack_ie.hdr); + INIT_LIST_HEAD(&wusbhc->cack_list); + + d_fnend(3, wusbhc->dev, "(wusbhc %p) = void\n", wusbhc); + return 0; +} + +/* + * Release all resources taken by the devconnect stuff + */ +void wusbhc_devconnect_destroy(struct wusbhc *wusbhc) +{ + d_fnstart(3, wusbhc->dev, "(wusbhc %p)\n", wusbhc); + d_fnend(3, wusbhc->dev, "(wusbhc %p) = void\n", wusbhc); +} + +/* + * wusbhc_devconnect_start - start accepting device connections + * @wusbhc: the WUSB HC + * + * Sets the Host Info IE to accept all new connections. + * + * FIXME: This also enables the keep alives but this is not necessary + * until there are connected and authenticated devices. + */ +int wusbhc_devconnect_start(struct wusbhc *wusbhc, + const struct wusb_ckhdid *chid) +{ + struct device *dev = wusbhc->dev; + struct wuie_host_info *hi; + int result; + + hi = kzalloc(sizeof(*hi), GFP_KERNEL); + if (hi == NULL) + return -ENOMEM; + + hi->hdr.bLength = sizeof(*hi); + hi->hdr.bIEIdentifier = WUIE_ID_HOST_INFO; + hi->attributes = cpu_to_le16((wusbhc->rsv->stream << 3) | WUIE_HI_CAP_ALL); + hi->CHID = *chid; + result = wusbhc_mmcie_set(wusbhc, 0, 0, &hi->hdr); + if (result < 0) { + dev_err(dev, "Cannot add Host Info MMCIE: %d\n", result); + goto error_mmcie_set; + } + wusbhc->wuie_host_info = hi; + + queue_delayed_work(wusbd, &wusbhc->keep_alive_timer, + (wusbhc->trust_timeout*CONFIG_HZ)/1000/2); + + return 0; + +error_mmcie_set: + kfree(hi); + return result; +} + +/* + * wusbhc_devconnect_stop - stop managing connected devices + * @wusbhc: the WUSB HC + * + * Removes the Host Info IE and stops the keep alives. + * + * FIXME: should this disconnect all devices? + */ +void wusbhc_devconnect_stop(struct wusbhc *wusbhc) +{ + cancel_delayed_work_sync(&wusbhc->keep_alive_timer); + WARN_ON(!list_empty(&wusbhc->cack_list)); + + wusbhc_mmcie_rm(wusbhc, &wusbhc->wuie_host_info->hdr); + kfree(wusbhc->wuie_host_info); + wusbhc->wuie_host_info = NULL; +} + +/* + * wusb_set_dev_addr - set the WUSB device address used by the host + * @wusbhc: the WUSB HC the device is connect to + * @wusb_dev: the WUSB device + * @addr: new device address + */ +int wusb_set_dev_addr(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev, u8 addr) +{ + int result; + + wusb_dev->addr = addr; + result = wusbhc->dev_info_set(wusbhc, wusb_dev); + if (result < 0) + dev_err(wusbhc->dev, "device %d: failed to set device " + "address\n", wusb_dev->port_idx); + else + dev_info(wusbhc->dev, "device %d: %s addr %u\n", + wusb_dev->port_idx, + (addr & WUSB_DEV_ADDR_UNAUTH) ? "unauth" : "auth", + wusb_dev->addr); + + return result; +} diff --git a/drivers/usb/wusbcore/mmc.c b/drivers/usb/wusbcore/mmc.c new file mode 100644 index 000000000000..cfa77a01cebd --- /dev/null +++ b/drivers/usb/wusbcore/mmc.c @@ -0,0 +1,321 @@ +/* + * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8]) + * MMC (Microscheduled Management Command) handling + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * WUIEs and MMC IEs...well, they are almost the same at the end. MMC + * IEs are Wireless USB IEs that go into the MMC period...[what is + * that? look in Design-overview.txt]. + * + * + * This is a simple subsystem to keep track of which IEs are being + * sent by the host in the MMC period. + * + * For each WUIE we ask to send, we keep it in an array, so we can + * request its removal later, or replace the content. They are tracked + * by pointer, so be sure to use the same pointer if you want to + * remove it or update the contents. + * + * FIXME: + * - add timers that autoremove intervalled IEs? + */ +#include <linux/usb/wusb.h> +#include "wusbhc.h" + +/* Initialize the MMCIEs handling mechanism */ +int wusbhc_mmcie_create(struct wusbhc *wusbhc) +{ + u8 mmcies = wusbhc->mmcies_max; + wusbhc->mmcie = kcalloc(mmcies, sizeof(wusbhc->mmcie[0]), GFP_KERNEL); + if (wusbhc->mmcie == NULL) + return -ENOMEM; + mutex_init(&wusbhc->mmcie_mutex); + return 0; +} + +/* Release resources used by the MMCIEs handling mechanism */ +void wusbhc_mmcie_destroy(struct wusbhc *wusbhc) +{ + kfree(wusbhc->mmcie); +} + +/* + * Add or replace an MMC Wireless USB IE. + * + * @interval: See WUSB1.0[8.5.3.1] + * @repeat_cnt: See WUSB1.0[8.5.3.1] + * @handle: See WUSB1.0[8.5.3.1] + * @wuie: Pointer to the header of the WUSB IE data to add. + * MUST BE allocated in a kmalloc buffer (no stack or + * vmalloc). + * THE CALLER ALWAYS OWNS THE POINTER (we don't free it + * on remove, we just forget about it). + * @returns: 0 if ok, < 0 errno code on error. + * + * Goes over the *whole* @wusbhc->mmcie array looking for (a) the + * first free spot and (b) if @wuie is already in the array (aka: + * transmitted in the MMCs) the spot were it is. + * + * If present, we "overwrite it" (update). + * + * + * NOTE: Need special ordering rules -- see below WUSB1.0 Table 7-38. + * The host uses the handle as the 'sort' index. We + * allocate the last one always for the WUIE_ID_HOST_INFO, and + * the rest, first come first serve in inverse order. + * + * Host software must make sure that it adds the other IEs in + * the right order... the host hardware is responsible for + * placing the WCTA IEs in the right place with the other IEs + * set by host software. + * + * NOTE: we can access wusbhc->wa_descr without locking because it is + * read only. + */ +int wusbhc_mmcie_set(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt, + struct wuie_hdr *wuie) +{ + int result = -ENOBUFS; + unsigned handle, itr; + + /* Search a handle, taking into account the ordering */ + mutex_lock(&wusbhc->mmcie_mutex); + switch (wuie->bIEIdentifier) { + case WUIE_ID_HOST_INFO: + /* Always last */ + handle = wusbhc->mmcies_max - 1; + break; + case WUIE_ID_ISOCH_DISCARD: + dev_err(wusbhc->dev, "Special ordering case for WUIE ID 0x%x " + "unimplemented\n", wuie->bIEIdentifier); + result = -ENOSYS; + goto error_unlock; + default: + /* search for it or find the last empty slot */ + handle = ~0; + for (itr = 0; itr < wusbhc->mmcies_max - 1; itr++) { + if (wusbhc->mmcie[itr] == wuie) { + handle = itr; + break; + } + if (wusbhc->mmcie[itr] == NULL) + handle = itr; + } + if (handle == ~0) + goto error_unlock; + } + result = (wusbhc->mmcie_add)(wusbhc, interval, repeat_cnt, handle, + wuie); + if (result >= 0) + wusbhc->mmcie[handle] = wuie; +error_unlock: + mutex_unlock(&wusbhc->mmcie_mutex); + return result; +} +EXPORT_SYMBOL_GPL(wusbhc_mmcie_set); + +/* + * Remove an MMC IE previously added with wusbhc_mmcie_set() + * + * @wuie Pointer used to add the WUIE + */ +void wusbhc_mmcie_rm(struct wusbhc *wusbhc, struct wuie_hdr *wuie) +{ + int result; + unsigned handle, itr; + + mutex_lock(&wusbhc->mmcie_mutex); + for (itr = 0; itr < wusbhc->mmcies_max; itr++) { + if (wusbhc->mmcie[itr] == wuie) { + handle = itr; + goto found; + } + } + mutex_unlock(&wusbhc->mmcie_mutex); + return; + +found: + result = (wusbhc->mmcie_rm)(wusbhc, handle); + if (result == 0) + wusbhc->mmcie[itr] = NULL; + mutex_unlock(&wusbhc->mmcie_mutex); +} +EXPORT_SYMBOL_GPL(wusbhc_mmcie_rm); + +/* + * wusbhc_start - start transmitting MMCs and accepting connections + * @wusbhc: the HC to start + * @chid: the CHID to use for this host + * + * Establishes a cluster reservation, enables device connections, and + * starts MMCs with appropriate DNTS parameters. + */ +int wusbhc_start(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid) +{ + int result; + struct device *dev = wusbhc->dev; + + WARN_ON(wusbhc->wuie_host_info != NULL); + + result = wusbhc_rsv_establish(wusbhc); + if (result < 0) { + dev_err(dev, "cannot establish cluster reservation: %d\n", + result); + goto error_rsv_establish; + } + + result = wusbhc_devconnect_start(wusbhc, chid); + if (result < 0) { + dev_err(dev, "error enabling device connections: %d\n", result); + goto error_devconnect_start; + } + + result = wusbhc_sec_start(wusbhc); + if (result < 0) { + dev_err(dev, "error starting security in the HC: %d\n", result); + goto error_sec_start; + } + /* FIXME: the choice of the DNTS parameters is somewhat + * arbitrary */ + result = wusbhc->set_num_dnts(wusbhc, 0, 15); + if (result < 0) { + dev_err(dev, "Cannot set DNTS parameters: %d\n", result); + goto error_set_num_dnts; + } + result = wusbhc->start(wusbhc); + if (result < 0) { + dev_err(dev, "error starting wusbch: %d\n", result); + goto error_wusbhc_start; + } + wusbhc->active = 1; + return 0; + +error_wusbhc_start: + wusbhc_sec_stop(wusbhc); +error_set_num_dnts: +error_sec_start: + wusbhc_devconnect_stop(wusbhc); +error_devconnect_start: + wusbhc_rsv_terminate(wusbhc); +error_rsv_establish: + return result; +} + +/* + * Disconnect all from the WUSB Channel + * + * Send a Host Disconnect IE in the MMC, wait, don't send it any more + */ +static int __wusbhc_host_disconnect_ie(struct wusbhc *wusbhc) +{ + int result = -ENOMEM; + struct wuie_host_disconnect *host_disconnect_ie; + might_sleep(); + host_disconnect_ie = kmalloc(sizeof(*host_disconnect_ie), GFP_KERNEL); + if (host_disconnect_ie == NULL) + goto error_alloc; + host_disconnect_ie->hdr.bLength = sizeof(*host_disconnect_ie); + host_disconnect_ie->hdr.bIEIdentifier = WUIE_ID_HOST_DISCONNECT; + result = wusbhc_mmcie_set(wusbhc, 0, 0, &host_disconnect_ie->hdr); + if (result < 0) + goto error_mmcie_set; + + /* WUSB1.0[8.5.3.1 & 7.5.2] */ + msleep(100); + wusbhc_mmcie_rm(wusbhc, &host_disconnect_ie->hdr); +error_mmcie_set: + kfree(host_disconnect_ie); +error_alloc: + return result; +} + +/* + * wusbhc_stop - stop transmitting MMCs + * @wusbhc: the HC to stop + * + * Send a Host Disconnect IE, wait, remove all the MMCs (stop sending MMCs). + * + * If we can't allocate a Host Stop IE, screw it, we don't notify the + * devices we are disconnecting... + */ +void wusbhc_stop(struct wusbhc *wusbhc) +{ + if (wusbhc->active) { + wusbhc->active = 0; + wusbhc->stop(wusbhc); + wusbhc_sec_stop(wusbhc); + __wusbhc_host_disconnect_ie(wusbhc); + wusbhc_devconnect_stop(wusbhc); + wusbhc_rsv_terminate(wusbhc); + } +} +EXPORT_SYMBOL_GPL(wusbhc_stop); + +/* + * Change the CHID in a WUSB Channel + * + * If it is just a new CHID, send a Host Disconnect IE and then change + * the CHID IE. + */ +static int __wusbhc_chid_change(struct wusbhc *wusbhc, + const struct wusb_ckhdid *chid) +{ + int result = -ENOSYS; + struct device *dev = wusbhc->dev; + dev_err(dev, "%s() not implemented yet\n", __func__); + return result; + + BUG_ON(wusbhc->wuie_host_info == NULL); + __wusbhc_host_disconnect_ie(wusbhc); + wusbhc->wuie_host_info->CHID = *chid; + result = wusbhc_mmcie_set(wusbhc, 0, 0, &wusbhc->wuie_host_info->hdr); + if (result < 0) + dev_err(dev, "Can't update Host Info WUSB IE: %d\n", result); + return result; +} + +/* + * Set/reset/update a new CHID + * + * Depending on the previous state of the MMCs, start, stop or change + * the sent MMC. This effectively switches the host controller on and + * off (radio wise). + */ +int wusbhc_chid_set(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid) +{ + int result = 0; + + if (memcmp(chid, &wusb_ckhdid_zero, sizeof(chid)) == 0) + chid = NULL; + + mutex_lock(&wusbhc->mutex); + if (wusbhc->active) { + if (chid) + result = __wusbhc_chid_change(wusbhc, chid); + else + wusbhc_stop(wusbhc); + } else { + if (chid) + wusbhc_start(wusbhc, chid); + } + mutex_unlock(&wusbhc->mutex); + return result; +} +EXPORT_SYMBOL_GPL(wusbhc_chid_set); diff --git a/drivers/usb/wusbcore/pal.c b/drivers/usb/wusbcore/pal.c new file mode 100644 index 000000000000..7cc51e9905cf --- /dev/null +++ b/drivers/usb/wusbcore/pal.c @@ -0,0 +1,42 @@ +/* + * Wireless USB Host Controller + * UWB Protocol Adaptation Layer (PAL) glue. + * + * Copyright (C) 2008 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include "wusbhc.h" + +/** + * wusbhc_pal_register - register the WUSB HC as a UWB PAL + * @wusbhc: the WUSB HC + */ +int wusbhc_pal_register(struct wusbhc *wusbhc) +{ + uwb_pal_init(&wusbhc->pal); + + wusbhc->pal.name = "wusbhc"; + wusbhc->pal.device = wusbhc->usb_hcd.self.controller; + + return uwb_pal_register(wusbhc->uwb_rc, &wusbhc->pal); +} + +/** + * wusbhc_pal_register - unregister the WUSB HC as a UWB PAL + * @wusbhc: the WUSB HC + */ +void wusbhc_pal_unregister(struct wusbhc *wusbhc) +{ + uwb_pal_unregister(wusbhc->uwb_rc, &wusbhc->pal); +} diff --git a/drivers/usb/wusbcore/reservation.c b/drivers/usb/wusbcore/reservation.c new file mode 100644 index 000000000000..fc63e77ded2d --- /dev/null +++ b/drivers/usb/wusbcore/reservation.c @@ -0,0 +1,115 @@ +/* + * WUSB cluster reservation management + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> +#include <linux/uwb.h> + +#include "wusbhc.h" + +/* + * WUSB cluster reservations are multicast reservations with the + * broadcast cluster ID (BCID) as the target DevAddr. + * + * FIXME: consider adjusting the reservation depending on what devices + * are attached. + */ + +static int wusbhc_bwa_set(struct wusbhc *wusbhc, u8 stream, + const struct uwb_mas_bm *mas) +{ + if (mas == NULL) + mas = &uwb_mas_bm_zero; + return wusbhc->bwa_set(wusbhc, stream, mas); +} + +/** + * wusbhc_rsv_complete_cb - WUSB HC reservation complete callback + * @rsv: the reservation + * + * Either set or clear the HC's view of the reservation. + * + * FIXME: when a reservation is denied the HC should be stopped. + */ +static void wusbhc_rsv_complete_cb(struct uwb_rsv *rsv) +{ + struct wusbhc *wusbhc = rsv->pal_priv; + struct device *dev = wusbhc->dev; + char buf[72]; + + switch (rsv->state) { + case UWB_RSV_STATE_O_ESTABLISHED: + bitmap_scnprintf(buf, sizeof(buf), rsv->mas.bm, UWB_NUM_MAS); + dev_dbg(dev, "established reservation: %s\n", buf); + wusbhc_bwa_set(wusbhc, rsv->stream, &rsv->mas); + break; + case UWB_RSV_STATE_NONE: + dev_dbg(dev, "removed reservation\n"); + wusbhc_bwa_set(wusbhc, 0, NULL); + wusbhc->rsv = NULL; + break; + default: + dev_dbg(dev, "unexpected reservation state: %d\n", rsv->state); + break; + } +} + + +/** + * wusbhc_rsv_establish - establish a reservation for the cluster + * @wusbhc: the WUSB HC requesting a bandwith reservation + */ +int wusbhc_rsv_establish(struct wusbhc *wusbhc) +{ + struct uwb_rc *rc = wusbhc->uwb_rc; + struct uwb_rsv *rsv; + struct uwb_dev_addr bcid; + int ret; + + rsv = uwb_rsv_create(rc, wusbhc_rsv_complete_cb, wusbhc); + if (rsv == NULL) + return -ENOMEM; + + bcid.data[0] = wusbhc->cluster_id; + bcid.data[1] = 0; + + rsv->owner = &rc->uwb_dev; + rsv->target.type = UWB_RSV_TARGET_DEVADDR; + rsv->target.devaddr = bcid; + rsv->type = UWB_DRP_TYPE_PRIVATE; + rsv->max_mas = 256; + rsv->min_mas = 16; /* one MAS per zone? */ + rsv->sparsity = 16; /* at least one MAS in each zone? */ + rsv->is_multicast = true; + + ret = uwb_rsv_establish(rsv); + if (ret == 0) + wusbhc->rsv = rsv; + else + uwb_rsv_destroy(rsv); + return ret; +} + + +/** + * wusbhc_rsv_terminate - terminate any cluster reservation + * @wusbhc: the WUSB host whose reservation is to be terminated + */ +void wusbhc_rsv_terminate(struct wusbhc *wusbhc) +{ + if (wusbhc->rsv) + uwb_rsv_terminate(wusbhc->rsv); +} diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c new file mode 100644 index 000000000000..267a64325106 --- /dev/null +++ b/drivers/usb/wusbcore/rh.c @@ -0,0 +1,477 @@ +/* + * Wireless USB Host Controller + * Root Hub operations + * + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * We fake a root hub that has fake ports (as many as simultaneous + * devices the Wireless USB Host Controller can deal with). For each + * port we keep an state in @wusbhc->port[index] identical to the one + * specified in the USB2.0[ch11] spec and some extra device + * information that complements the one in 'struct usb_device' (as + * this lacs a hcpriv pointer). + * + * Note this is common to WHCI and HWA host controllers. + * + * Through here we enable most of the state changes that the USB stack + * will use to connect or disconnect devices. We need to do some + * forced adaptation of Wireless USB device states vs. wired: + * + * USB: WUSB: + * + * Port Powered-off port slot n/a + * Powered-on port slot available + * Disconnected port slot available + * Connected port slot assigned device + * device sent DN_Connect + * device was authenticated + * Enabled device is authenticated, transitioned + * from unauth -> auth -> default address + * -> enabled + * Reset disconnect + * Disable disconnect + * + * This maps the standard USB port states with the WUSB device states + * so we can fake ports without having to modify the USB stack. + * + * FIXME: this process will change in the future + * + * + * ENTRY POINTS + * + * Our entry points into here are, as in hcd.c, the USB stack root hub + * ops defined in the usb_hcd struct: + * + * wusbhc_rh_status_data() Provide hub and port status data bitmap + * + * wusbhc_rh_control() Execution of all the major requests + * you can do to a hub (Set|Clear + * features, get descriptors, status, etc). + * + * wusbhc_rh_[suspend|resume]() That + * + * wusbhc_rh_start_port_reset() ??? unimplemented + */ +#include "wusbhc.h" + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +/* + * Reset a fake port + * + * This can be called to reset a port from any other state or to reset + * it when connecting. In Wireless USB they are different; when doing + * a new connect that involves going over the authentication. When + * just reseting, its a different story. + * + * The Linux USB stack resets a port twice before it considers it + * enabled, so we have to detect and ignore that. + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + * + * Supposedly we are the only thread accesing @wusbhc->port; in any + * case, maybe we should move the mutex locking from + * wusbhc_devconnect_auth() to here. + * + * @port_idx refers to the wusbhc's port index, not the USB port number + */ +static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx) +{ + int result = 0; + struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx); + + d_fnstart(3, wusbhc->dev, "(wusbhc %p port_idx %u)\n", + wusbhc, port_idx); + if (port->reset_count == 0) { + wusbhc_devconnect_auth(wusbhc, port_idx); + port->reset_count++; + } else if (port->reset_count == 1) + /* see header */ + d_printf(2, wusbhc->dev, "Ignoring second reset on port_idx " + "%u\n", port_idx); + else + result = wusbhc_dev_reset(wusbhc, port_idx); + d_fnend(3, wusbhc->dev, "(wusbhc %p port_idx %u) = %d\n", + wusbhc, port_idx, result); + return result; +} + +/* + * Return the hub change status bitmap + * + * The bits in the change status bitmap are cleared when a + * ClearPortFeature request is issued (USB2.0[11.12.3,11.12.4]. + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + * + * WARNING!! This gets called from atomic context; we cannot get the + * mutex--the only race condition we can find is some bit + * changing just after we copy it, which shouldn't be too + * big of a problem [and we can't make it an spinlock + * because other parts need to take it and sleep] . + * + * @usb_hcd is refcounted, so it won't dissapear under us + * and before killing a host, the polling of the root hub + * would be stopped anyway. + */ +int wusbhc_rh_status_data(struct usb_hcd *usb_hcd, char *_buf) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + size_t cnt, size; + unsigned long *buf = (unsigned long *) _buf; + + d_fnstart(1, wusbhc->dev, "(wusbhc %p)\n", wusbhc); + /* WE DON'T LOCK, see comment */ + size = wusbhc->ports_max + 1 /* hub bit */; + size = (size + 8 - 1) / 8; /* round to bytes */ + for (cnt = 0; cnt < wusbhc->ports_max; cnt++) + if (wusb_port_by_idx(wusbhc, cnt)->change) + set_bit(cnt + 1, buf); + else + clear_bit(cnt + 1, buf); + d_fnend(1, wusbhc->dev, "(wusbhc %p) %u, buffer:\n", wusbhc, (int)size); + d_dump(1, wusbhc->dev, _buf, size); + return size; +} +EXPORT_SYMBOL_GPL(wusbhc_rh_status_data); + +/* + * Return the hub's desciptor + * + * NOTE: almost cut and paste from ehci-hub.c + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked + */ +static int wusbhc_rh_get_hub_descr(struct wusbhc *wusbhc, u16 wValue, + u16 wIndex, + struct usb_hub_descriptor *descr, + u16 wLength) +{ + u16 temp = 1 + (wusbhc->ports_max / 8); + u8 length = 7 + 2 * temp; + + if (wLength < length) + return -ENOSPC; + descr->bDescLength = 7 + 2 * temp; + descr->bDescriptorType = 0x29; /* HUB type */ + descr->bNbrPorts = wusbhc->ports_max; + descr->wHubCharacteristics = cpu_to_le16( + 0x00 /* All ports power at once */ + | 0x00 /* not part of compound device */ + | 0x10 /* No overcurrent protection */ + | 0x00 /* 8 FS think time FIXME ?? */ + | 0x00); /* No port indicators */ + descr->bPwrOn2PwrGood = 0; + descr->bHubContrCurrent = 0; + /* two bitmaps: ports removable, and usb 1.0 legacy PortPwrCtrlMask */ + memset(&descr->bitmap[0], 0, temp); + memset(&descr->bitmap[temp], 0xff, temp); + return 0; +} + +/* + * Clear a hub feature + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + * + * Nothing to do, so no locking needed ;) + */ +static int wusbhc_rh_clear_hub_feat(struct wusbhc *wusbhc, u16 feature) +{ + int result; + struct device *dev = wusbhc->dev; + + d_fnstart(4, dev, "(%p, feature 0x%04u)\n", wusbhc, feature); + switch (feature) { + case C_HUB_LOCAL_POWER: + /* FIXME: maybe plug bit 0 to the power input status, + * if any? + * see wusbhc_rh_get_hub_status() */ + case C_HUB_OVER_CURRENT: + result = 0; + break; + default: + result = -EPIPE; + } + d_fnend(4, dev, "(%p, feature 0x%04u), %d\n", wusbhc, feature, result); + return result; +} + +/* + * Return hub status (it is always zero...) + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + * + * Nothing to do, so no locking needed ;) + */ +static int wusbhc_rh_get_hub_status(struct wusbhc *wusbhc, u32 *buf, + u16 wLength) +{ + /* FIXME: maybe plug bit 0 to the power input status (if any)? */ + *buf = 0; + return 0; +} + +/* + * Set a port feature + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + */ +static int wusbhc_rh_set_port_feat(struct wusbhc *wusbhc, u16 feature, + u8 selector, u8 port_idx) +{ + int result = -EINVAL; + struct device *dev = wusbhc->dev; + + d_fnstart(4, dev, "(feat 0x%04u, selector 0x%u, port_idx %d)\n", + feature, selector, port_idx); + + if (port_idx > wusbhc->ports_max) + goto error; + + switch (feature) { + /* According to USB2.0[11.24.2.13]p2, these features + * are not required to be implemented. */ + case USB_PORT_FEAT_C_OVER_CURRENT: + case USB_PORT_FEAT_C_ENABLE: + case USB_PORT_FEAT_C_SUSPEND: + case USB_PORT_FEAT_C_CONNECTION: + case USB_PORT_FEAT_C_RESET: + result = 0; + break; + + case USB_PORT_FEAT_POWER: + /* No such thing, but we fake it works */ + mutex_lock(&wusbhc->mutex); + wusb_port_by_idx(wusbhc, port_idx)->status |= USB_PORT_STAT_POWER; + mutex_unlock(&wusbhc->mutex); + result = 0; + break; + case USB_PORT_FEAT_RESET: + result = wusbhc_rh_port_reset(wusbhc, port_idx); + break; + case USB_PORT_FEAT_ENABLE: + case USB_PORT_FEAT_SUSPEND: + dev_err(dev, "(port_idx %d) set feat %d/%d UNIMPLEMENTED\n", + port_idx, feature, selector); + result = -ENOSYS; + break; + default: + dev_err(dev, "(port_idx %d) set feat %d/%d UNKNOWN\n", + port_idx, feature, selector); + result = -EPIPE; + break; + } +error: + d_fnend(4, dev, "(feat 0x%04u, selector 0x%u, port_idx %d) = %d\n", + feature, selector, port_idx, result); + return result; +} + +/* + * Clear a port feature... + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + */ +static int wusbhc_rh_clear_port_feat(struct wusbhc *wusbhc, u16 feature, + u8 selector, u8 port_idx) +{ + int result = -EINVAL; + struct device *dev = wusbhc->dev; + + d_fnstart(4, dev, "(wusbhc %p feat 0x%04x selector %d port_idx %d)\n", + wusbhc, feature, selector, port_idx); + + if (port_idx > wusbhc->ports_max) + goto error; + + mutex_lock(&wusbhc->mutex); + result = 0; + switch (feature) { + case USB_PORT_FEAT_POWER: /* fake port always on */ + /* According to USB2.0[11.24.2.7.1.4], no need to implement? */ + case USB_PORT_FEAT_C_OVER_CURRENT: + break; + case USB_PORT_FEAT_C_RESET: + wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_RESET; + break; + case USB_PORT_FEAT_C_CONNECTION: + wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_CONNECTION; + break; + case USB_PORT_FEAT_ENABLE: + __wusbhc_dev_disable(wusbhc, port_idx); + break; + case USB_PORT_FEAT_C_ENABLE: + wusb_port_by_idx(wusbhc, port_idx)->change &= ~USB_PORT_STAT_C_ENABLE; + break; + case USB_PORT_FEAT_SUSPEND: + case USB_PORT_FEAT_C_SUSPEND: + case 0xffff: /* ??? FIXME */ + dev_err(dev, "(port_idx %d) Clear feat %d/%d UNIMPLEMENTED\n", + port_idx, feature, selector); + /* dump_stack(); */ + result = -ENOSYS; + break; + default: + dev_err(dev, "(port_idx %d) Clear feat %d/%d UNKNOWN\n", + port_idx, feature, selector); + result = -EPIPE; + break; + } + mutex_unlock(&wusbhc->mutex); +error: + d_fnend(4, dev, "(wusbhc %p feat 0x%04x selector %d port_idx %d) = " + "%d\n", wusbhc, feature, selector, port_idx, result); + return result; +} + +/* + * Return the port's status + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + */ +static int wusbhc_rh_get_port_status(struct wusbhc *wusbhc, u16 port_idx, + u32 *_buf, u16 wLength) +{ + int result = -EINVAL; + u16 *buf = (u16 *) _buf; + + d_fnstart(1, wusbhc->dev, "(wusbhc %p port_idx %u wLength %u)\n", + wusbhc, port_idx, wLength); + if (port_idx > wusbhc->ports_max) + goto error; + mutex_lock(&wusbhc->mutex); + buf[0] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->status); + buf[1] = cpu_to_le16(wusb_port_by_idx(wusbhc, port_idx)->change); + result = 0; + mutex_unlock(&wusbhc->mutex); +error: + d_fnend(1, wusbhc->dev, "(wusbhc %p) = %d, buffer:\n", wusbhc, result); + d_dump(1, wusbhc->dev, _buf, wLength); + return result; +} + +/* + * Entry point for Root Hub operations + * + * @wusbhc is assumed referenced and @wusbhc->mutex unlocked. + */ +int wusbhc_rh_control(struct usb_hcd *usb_hcd, u16 reqntype, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + int result = -ENOSYS; + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + + switch (reqntype) { + case GetHubDescriptor: + result = wusbhc_rh_get_hub_descr( + wusbhc, wValue, wIndex, + (struct usb_hub_descriptor *) buf, wLength); + break; + case ClearHubFeature: + result = wusbhc_rh_clear_hub_feat(wusbhc, wValue); + break; + case GetHubStatus: + result = wusbhc_rh_get_hub_status(wusbhc, (u32 *)buf, wLength); + break; + + case SetPortFeature: + result = wusbhc_rh_set_port_feat(wusbhc, wValue, wIndex >> 8, + (wIndex & 0xff) - 1); + break; + case ClearPortFeature: + result = wusbhc_rh_clear_port_feat(wusbhc, wValue, wIndex >> 8, + (wIndex & 0xff) - 1); + break; + case GetPortStatus: + result = wusbhc_rh_get_port_status(wusbhc, wIndex - 1, + (u32 *)buf, wLength); + break; + + case SetHubFeature: + default: + dev_err(wusbhc->dev, "%s (%p [%p], %x, %x, %x, %p, %x) " + "UNIMPLEMENTED\n", __func__, usb_hcd, wusbhc, reqntype, + wValue, wIndex, buf, wLength); + /* dump_stack(); */ + result = -ENOSYS; + } + return result; +} +EXPORT_SYMBOL_GPL(wusbhc_rh_control); + +int wusbhc_rh_suspend(struct usb_hcd *usb_hcd) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__, + usb_hcd, wusbhc); + /* dump_stack(); */ + return -ENOSYS; +} +EXPORT_SYMBOL_GPL(wusbhc_rh_suspend); + +int wusbhc_rh_resume(struct usb_hcd *usb_hcd) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + dev_err(wusbhc->dev, "%s (%p [%p]) UNIMPLEMENTED\n", __func__, + usb_hcd, wusbhc); + /* dump_stack(); */ + return -ENOSYS; +} +EXPORT_SYMBOL_GPL(wusbhc_rh_resume); + +int wusbhc_rh_start_port_reset(struct usb_hcd *usb_hcd, unsigned port_idx) +{ + struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd); + dev_err(wusbhc->dev, "%s (%p [%p], port_idx %u) UNIMPLEMENTED\n", + __func__, usb_hcd, wusbhc, port_idx); + WARN_ON(1); + return -ENOSYS; +} +EXPORT_SYMBOL_GPL(wusbhc_rh_start_port_reset); + +static void wusb_port_init(struct wusb_port *port) +{ + port->status |= USB_PORT_STAT_HIGH_SPEED; +} + +/* + * Alloc fake port specific fields and status. + */ +int wusbhc_rh_create(struct wusbhc *wusbhc) +{ + int result = -ENOMEM; + size_t port_size, itr; + port_size = wusbhc->ports_max * sizeof(wusbhc->port[0]); + wusbhc->port = kzalloc(port_size, GFP_KERNEL); + if (wusbhc->port == NULL) + goto error_port_alloc; + for (itr = 0; itr < wusbhc->ports_max; itr++) + wusb_port_init(&wusbhc->port[itr]); + result = 0; +error_port_alloc: + return result; +} + +void wusbhc_rh_destroy(struct wusbhc *wusbhc) +{ + kfree(wusbhc->port); +} diff --git a/drivers/usb/wusbcore/security.c b/drivers/usb/wusbcore/security.c new file mode 100644 index 000000000000..a101cad6a8d4 --- /dev/null +++ b/drivers/usb/wusbcore/security.c @@ -0,0 +1,642 @@ +/* + * Wireless USB Host Controller + * Security support: encryption enablement, etc + * + * Copyright (C) 2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ +#include <linux/types.h> +#include <linux/usb/ch9.h> +#include <linux/random.h> +#include "wusbhc.h" + +/* + * DEBUG & SECURITY WARNING!!!! + * + * If you enable this past 1, the debug code will weaken the + * cryptographic safety of the system (on purpose, for debugging). + * + * Weaken means: + * we print secret keys and intermediate values all the way, + */ +#undef D_LOCAL +#define D_LOCAL 2 +#include <linux/uwb/debug.h> + +static void wusbhc_set_gtk_callback(struct urb *urb); +static void wusbhc_gtk_rekey_done_work(struct work_struct *work); + +int wusbhc_sec_create(struct wusbhc *wusbhc) +{ + wusbhc->gtk.descr.bLength = sizeof(wusbhc->gtk.descr) + sizeof(wusbhc->gtk.data); + wusbhc->gtk.descr.bDescriptorType = USB_DT_KEY; + wusbhc->gtk.descr.bReserved = 0; + + wusbhc->gtk_index = wusb_key_index(0, WUSB_KEY_INDEX_TYPE_GTK, + WUSB_KEY_INDEX_ORIGINATOR_HOST); + + INIT_WORK(&wusbhc->gtk_rekey_done_work, wusbhc_gtk_rekey_done_work); + + return 0; +} + + +/* Called when the HC is destroyed */ +void wusbhc_sec_destroy(struct wusbhc *wusbhc) +{ +} + + +/** + * wusbhc_next_tkid - generate a new, currently unused, TKID + * @wusbhc: the WUSB host controller + * @wusb_dev: the device whose PTK the TKID is for + * (or NULL for a TKID for a GTK) + * + * The generated TKID consist of two parts: the device's authenicated + * address (or 0 or a GTK); and an incrementing number. This ensures + * that TKIDs cannot be shared between devices and by the time the + * incrementing number wraps around the older TKIDs will no longer be + * in use (a maximum of two keys may be active at any one time). + */ +static u32 wusbhc_next_tkid(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) +{ + u32 *tkid; + u32 addr; + + if (wusb_dev == NULL) { + tkid = &wusbhc->gtk_tkid; + addr = 0; + } else { + tkid = &wusb_port_by_idx(wusbhc, wusb_dev->port_idx)->ptk_tkid; + addr = wusb_dev->addr & 0x7f; + } + + *tkid = (addr << 8) | ((*tkid + 1) & 0xff); + + return *tkid; +} + +static void wusbhc_generate_gtk(struct wusbhc *wusbhc) +{ + const size_t key_size = sizeof(wusbhc->gtk.data); + u32 tkid; + + tkid = wusbhc_next_tkid(wusbhc, NULL); + + wusbhc->gtk.descr.tTKID[0] = (tkid >> 0) & 0xff; + wusbhc->gtk.descr.tTKID[1] = (tkid >> 8) & 0xff; + wusbhc->gtk.descr.tTKID[2] = (tkid >> 16) & 0xff; + + get_random_bytes(wusbhc->gtk.descr.bKeyData, key_size); +} + +/** + * wusbhc_sec_start - start the security management process + * @wusbhc: the WUSB host controller + * + * Generate and set an initial GTK on the host controller. + * + * Called when the HC is started. + */ +int wusbhc_sec_start(struct wusbhc *wusbhc) +{ + const size_t key_size = sizeof(wusbhc->gtk.data); + int result; + + wusbhc_generate_gtk(wusbhc); + + result = wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid, + &wusbhc->gtk.descr.bKeyData, key_size); + if (result < 0) + dev_err(wusbhc->dev, "cannot set GTK for the host: %d\n", + result); + + return result; +} + +/** + * wusbhc_sec_stop - stop the security management process + * @wusbhc: the WUSB host controller + * + * Wait for any pending GTK rekeys to stop. + */ +void wusbhc_sec_stop(struct wusbhc *wusbhc) +{ + cancel_work_sync(&wusbhc->gtk_rekey_done_work); +} + + +/** @returns encryption type name */ +const char *wusb_et_name(u8 x) +{ + switch (x) { + case USB_ENC_TYPE_UNSECURE: return "unsecure"; + case USB_ENC_TYPE_WIRED: return "wired"; + case USB_ENC_TYPE_CCM_1: return "CCM-1"; + case USB_ENC_TYPE_RSA_1: return "RSA-1"; + default: return "unknown"; + } +} +EXPORT_SYMBOL_GPL(wusb_et_name); + +/* + * Set the device encryption method + * + * We tell the device which encryption method to use; we do this when + * setting up the device's security. + */ +static int wusb_dev_set_encryption(struct usb_device *usb_dev, int value) +{ + int result; + struct device *dev = &usb_dev->dev; + struct wusb_dev *wusb_dev = usb_dev->wusb_dev; + + if (value) { + value = wusb_dev->ccm1_etd.bEncryptionValue; + } else { + /* FIXME: should be wusb_dev->etd[UNSECURE].bEncryptionValue */ + value = 0; + } + /* Set device's */ + result = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), + USB_REQ_SET_ENCRYPTION, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + value, 0, NULL, 0, 1000 /* FIXME: arbitrary */); + if (result < 0) + dev_err(dev, "Can't set device's WUSB encryption to " + "%s (value %d): %d\n", + wusb_et_name(wusb_dev->ccm1_etd.bEncryptionType), + wusb_dev->ccm1_etd.bEncryptionValue, result); + return result; +} + +/* + * Set the GTK to be used by a device. + * + * The device must be authenticated. + */ +static int wusb_dev_set_gtk(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) +{ + struct usb_device *usb_dev = wusb_dev->usb_dev; + + return usb_control_msg( + usb_dev, usb_sndctrlpipe(usb_dev, 0), + USB_REQ_SET_DESCRIPTOR, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + USB_DT_KEY << 8 | wusbhc->gtk_index, 0, + &wusbhc->gtk.descr, wusbhc->gtk.descr.bLength, + 1000); +} + + +/* FIXME: prototype for adding security */ +int wusb_dev_sec_add(struct wusbhc *wusbhc, + struct usb_device *usb_dev, struct wusb_dev *wusb_dev) +{ + int result, bytes, secd_size; + struct device *dev = &usb_dev->dev; + struct usb_security_descriptor secd; + const struct usb_encryption_descriptor *etd, *ccm1_etd = NULL; + void *secd_buf; + const void *itr, *top; + char buf[64]; + + d_fnstart(3, dev, "(usb_dev %p, wusb_dev %p)\n", usb_dev, wusb_dev); + result = usb_get_descriptor(usb_dev, USB_DT_SECURITY, + 0, &secd, sizeof(secd)); + if (result < sizeof(secd)) { + dev_err(dev, "Can't read security descriptor or " + "not enough data: %d\n", result); + goto error_secd; + } + secd_size = le16_to_cpu(secd.wTotalLength); + d_printf(5, dev, "got %d bytes of sec descriptor, total is %d\n", + result, secd_size); + secd_buf = kmalloc(secd_size, GFP_KERNEL); + if (secd_buf == NULL) { + dev_err(dev, "Can't allocate space for security descriptors\n"); + goto error_secd_alloc; + } + result = usb_get_descriptor(usb_dev, USB_DT_SECURITY, + 0, secd_buf, secd_size); + if (result < secd_size) { + dev_err(dev, "Can't read security descriptor or " + "not enough data: %d\n", result); + goto error_secd_all; + } + d_printf(5, dev, "got %d bytes of sec descriptors\n", result); + bytes = 0; + itr = secd_buf + sizeof(secd); + top = secd_buf + result; + while (itr < top) { + etd = itr; + if (top - itr < sizeof(*etd)) { + dev_err(dev, "BUG: bad device security descriptor; " + "not enough data (%zu vs %zu bytes left)\n", + top - itr, sizeof(*etd)); + break; + } + if (etd->bLength < sizeof(*etd)) { + dev_err(dev, "BUG: bad device encryption descriptor; " + "descriptor is too short " + "(%u vs %zu needed)\n", + etd->bLength, sizeof(*etd)); + break; + } + itr += etd->bLength; + bytes += snprintf(buf + bytes, sizeof(buf) - bytes, + "%s (0x%02x/%02x) ", + wusb_et_name(etd->bEncryptionType), + etd->bEncryptionValue, etd->bAuthKeyIndex); + if (etd->bEncryptionType == USB_ENC_TYPE_CCM_1) + ccm1_etd = etd; + } + /* This code only supports CCM1 as of now. */ + /* FIXME: user has to choose which sec mode to use? + * In theory we want CCM */ + if (ccm1_etd == NULL) { + dev_err(dev, "WUSB device doesn't support CCM1 encryption, " + "can't use!\n"); + result = -EINVAL; + goto error_no_ccm1; + } + wusb_dev->ccm1_etd = *ccm1_etd; + dev_info(dev, "supported encryption: %s; using %s (0x%02x/%02x)\n", + buf, wusb_et_name(ccm1_etd->bEncryptionType), + ccm1_etd->bEncryptionValue, ccm1_etd->bAuthKeyIndex); + result = 0; + kfree(secd_buf); +out: + d_fnend(3, dev, "(usb_dev %p, wusb_dev %p) = %d\n", + usb_dev, wusb_dev, result); + return result; + + +error_no_ccm1: +error_secd_all: + kfree(secd_buf); +error_secd_alloc: +error_secd: + goto out; +} + +void wusb_dev_sec_rm(struct wusb_dev *wusb_dev) +{ + /* Nothing so far */ +} + +static void hs_printk(unsigned level, struct device *dev, + struct usb_handshake *hs) +{ + d_printf(level, dev, + " bMessageNumber: %u\n" + " bStatus: %u\n" + " tTKID: %02x %02x %02x\n" + " CDID: %02x %02x %02x %02x %02x %02x %02x %02x\n" + " %02x %02x %02x %02x %02x %02x %02x %02x\n" + " nonce: %02x %02x %02x %02x %02x %02x %02x %02x\n" + " %02x %02x %02x %02x %02x %02x %02x %02x\n" + " MIC: %02x %02x %02x %02x %02x %02x %02x %02x\n", + hs->bMessageNumber, hs->bStatus, + hs->tTKID[2], hs->tTKID[1], hs->tTKID[0], + hs->CDID[0], hs->CDID[1], hs->CDID[2], hs->CDID[3], + hs->CDID[4], hs->CDID[5], hs->CDID[6], hs->CDID[7], + hs->CDID[8], hs->CDID[9], hs->CDID[10], hs->CDID[11], + hs->CDID[12], hs->CDID[13], hs->CDID[14], hs->CDID[15], + hs->nonce[0], hs->nonce[1], hs->nonce[2], hs->nonce[3], + hs->nonce[4], hs->nonce[5], hs->nonce[6], hs->nonce[7], + hs->nonce[8], hs->nonce[9], hs->nonce[10], hs->nonce[11], + hs->nonce[12], hs->nonce[13], hs->nonce[14], hs->nonce[15], + hs->MIC[0], hs->MIC[1], hs->MIC[2], hs->MIC[3], + hs->MIC[4], hs->MIC[5], hs->MIC[6], hs->MIC[7]); +} + +/** + * Update the address of an unauthenticated WUSB device + * + * Once we have successfully authenticated, we take it to addr0 state + * and then to a normal address. + * + * Before the device's address (as known by it) was usb_dev->devnum | + * 0x80 (unauthenticated address). With this we update it to usb_dev->devnum. + */ +static int wusb_dev_update_address(struct wusbhc *wusbhc, + struct wusb_dev *wusb_dev) +{ + int result = -ENOMEM; + struct usb_device *usb_dev = wusb_dev->usb_dev; + struct device *dev = &usb_dev->dev; + u8 new_address = wusb_dev->addr & 0x7F; + + /* Set address 0 */ + result = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), + USB_REQ_SET_ADDRESS, 0, + 0, 0, NULL, 0, 1000 /* FIXME: arbitrary */); + if (result < 0) { + dev_err(dev, "auth failed: can't set address 0: %d\n", + result); + goto error_addr0; + } + result = wusb_set_dev_addr(wusbhc, wusb_dev, 0); + if (result < 0) + goto error_addr0; + usb_ep0_reinit(usb_dev); + + /* Set new (authenticated) address. */ + result = usb_control_msg(usb_dev, usb_sndctrlpipe(usb_dev, 0), + USB_REQ_SET_ADDRESS, 0, + new_address, 0, NULL, 0, + 1000 /* FIXME: arbitrary */); + if (result < 0) { + dev_err(dev, "auth failed: can't set address %u: %d\n", + new_address, result); + goto error_addr; + } + result = wusb_set_dev_addr(wusbhc, wusb_dev, new_address); + if (result < 0) + goto error_addr; + usb_ep0_reinit(usb_dev); + usb_dev->authenticated = 1; +error_addr: +error_addr0: + return result; +} + +/* + * + * + */ +/* FIXME: split and cleanup */ +int wusb_dev_4way_handshake(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev, + struct wusb_ckhdid *ck) +{ + int result = -ENOMEM; + struct usb_device *usb_dev = wusb_dev->usb_dev; + struct device *dev = &usb_dev->dev; + u32 tkid; + __le32 tkid_le; + struct usb_handshake *hs; + struct aes_ccm_nonce ccm_n; + u8 mic[8]; + struct wusb_keydvt_in keydvt_in; + struct wusb_keydvt_out keydvt_out; + + hs = kzalloc(3*sizeof(hs[0]), GFP_KERNEL); + if (hs == NULL) { + dev_err(dev, "can't allocate handshake data\n"); + goto error_kzalloc; + } + + /* We need to turn encryption before beginning the 4way + * hshake (WUSB1.0[.3.2.2]) */ + result = wusb_dev_set_encryption(usb_dev, 1); + if (result < 0) + goto error_dev_set_encryption; + + tkid = wusbhc_next_tkid(wusbhc, wusb_dev); + tkid_le = cpu_to_le32(tkid); + + hs[0].bMessageNumber = 1; + hs[0].bStatus = 0; + memcpy(hs[0].tTKID, &tkid_le, sizeof(hs[0].tTKID)); + hs[0].bReserved = 0; + memcpy(hs[0].CDID, &wusb_dev->cdid, sizeof(hs[0].CDID)); + get_random_bytes(&hs[0].nonce, sizeof(hs[0].nonce)); + memset(hs[0].MIC, 0, sizeof(hs[0].MIC)); /* Per WUSB1.0[T7-22] */ + + d_printf(1, dev, "I: sending hs1:\n"); + hs_printk(2, dev, &hs[0]); + + result = usb_control_msg( + usb_dev, usb_sndctrlpipe(usb_dev, 0), + USB_REQ_SET_HANDSHAKE, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + 1, 0, &hs[0], sizeof(hs[0]), 1000 /* FIXME: arbitrary */); + if (result < 0) { + dev_err(dev, "Handshake1: request failed: %d\n", result); + goto error_hs1; + } + + /* Handshake 2, from the device -- need to verify fields */ + result = usb_control_msg( + usb_dev, usb_rcvctrlpipe(usb_dev, 0), + USB_REQ_GET_HANDSHAKE, + USB_DIR_IN | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + 2, 0, &hs[1], sizeof(hs[1]), 1000 /* FIXME: arbitrary */); + if (result < 0) { + dev_err(dev, "Handshake2: request failed: %d\n", result); + goto error_hs2; + } + d_printf(1, dev, "got HS2:\n"); + hs_printk(2, dev, &hs[1]); + + result = -EINVAL; + if (hs[1].bMessageNumber != 2) { + dev_err(dev, "Handshake2 failed: bad message number %u\n", + hs[1].bMessageNumber); + goto error_hs2; + } + if (hs[1].bStatus != 0) { + dev_err(dev, "Handshake2 failed: bad status %u\n", + hs[1].bStatus); + goto error_hs2; + } + if (memcmp(hs[0].tTKID, hs[1].tTKID, sizeof(hs[0].tTKID))) { + dev_err(dev, "Handshake2 failed: TKID mismatch " + "(#1 0x%02x%02x%02x vs #2 0x%02x%02x%02x)\n", + hs[0].tTKID[0], hs[0].tTKID[1], hs[0].tTKID[2], + hs[1].tTKID[0], hs[1].tTKID[1], hs[1].tTKID[2]); + goto error_hs2; + } + if (memcmp(hs[0].CDID, hs[1].CDID, sizeof(hs[0].CDID))) { + dev_err(dev, "Handshake2 failed: CDID mismatch\n"); + goto error_hs2; + } + + /* Setup the CCM nonce */ + memset(&ccm_n.sfn, 0, sizeof(ccm_n.sfn)); /* Per WUSB1.0[6.5.2] */ + memcpy(ccm_n.tkid, &tkid_le, sizeof(ccm_n.tkid)); + ccm_n.src_addr = wusbhc->uwb_rc->uwb_dev.dev_addr; + ccm_n.dest_addr.data[0] = wusb_dev->addr; + ccm_n.dest_addr.data[1] = 0; + + /* Derive the KCK and PTK from CK, the CCM, H and D nonces */ + memcpy(keydvt_in.hnonce, hs[0].nonce, sizeof(keydvt_in.hnonce)); + memcpy(keydvt_in.dnonce, hs[1].nonce, sizeof(keydvt_in.dnonce)); + result = wusb_key_derive(&keydvt_out, ck->data, &ccm_n, &keydvt_in); + if (result < 0) { + dev_err(dev, "Handshake2 failed: cannot derive keys: %d\n", + result); + goto error_hs2; + } + d_printf(2, dev, "KCK:\n"); + d_dump(2, dev, keydvt_out.kck, sizeof(keydvt_out.kck)); + d_printf(2, dev, "PTK:\n"); + d_dump(2, dev, keydvt_out.ptk, sizeof(keydvt_out.ptk)); + + /* Compute MIC and verify it */ + result = wusb_oob_mic(mic, keydvt_out.kck, &ccm_n, &hs[1]); + if (result < 0) { + dev_err(dev, "Handshake2 failed: cannot compute MIC: %d\n", + result); + goto error_hs2; + } + + d_printf(2, dev, "MIC:\n"); + d_dump(2, dev, mic, sizeof(mic)); + if (memcmp(hs[1].MIC, mic, sizeof(hs[1].MIC))) { + dev_err(dev, "Handshake2 failed: MIC mismatch\n"); + goto error_hs2; + } + + /* Send Handshake3 */ + hs[2].bMessageNumber = 3; + hs[2].bStatus = 0; + memcpy(hs[2].tTKID, &tkid_le, sizeof(hs[2].tTKID)); + hs[2].bReserved = 0; + memcpy(hs[2].CDID, &wusb_dev->cdid, sizeof(hs[2].CDID)); + memcpy(hs[2].nonce, hs[0].nonce, sizeof(hs[2].nonce)); + result = wusb_oob_mic(hs[2].MIC, keydvt_out.kck, &ccm_n, &hs[2]); + if (result < 0) { + dev_err(dev, "Handshake3 failed: cannot compute MIC: %d\n", + result); + goto error_hs2; + } + + d_printf(1, dev, "I: sending hs3:\n"); + hs_printk(2, dev, &hs[2]); + + result = usb_control_msg( + usb_dev, usb_sndctrlpipe(usb_dev, 0), + USB_REQ_SET_HANDSHAKE, + USB_DIR_OUT | USB_TYPE_STANDARD | USB_RECIP_DEVICE, + 3, 0, &hs[2], sizeof(hs[2]), 1000 /* FIXME: arbitrary */); + if (result < 0) { + dev_err(dev, "Handshake3: request failed: %d\n", result); + goto error_hs3; + } + + d_printf(1, dev, "I: turning on encryption on host for device\n"); + d_dump(2, dev, keydvt_out.ptk, sizeof(keydvt_out.ptk)); + result = wusbhc->set_ptk(wusbhc, wusb_dev->port_idx, tkid, + keydvt_out.ptk, sizeof(keydvt_out.ptk)); + if (result < 0) + goto error_wusbhc_set_ptk; + + d_printf(1, dev, "I: setting a GTK\n"); + result = wusb_dev_set_gtk(wusbhc, wusb_dev); + if (result < 0) { + dev_err(dev, "Set GTK for device: request failed: %d\n", + result); + goto error_wusbhc_set_gtk; + } + + /* Update the device's address from unauth to auth */ + if (usb_dev->authenticated == 0) { + d_printf(1, dev, "I: updating addres to auth from non-auth\n"); + result = wusb_dev_update_address(wusbhc, wusb_dev); + if (result < 0) + goto error_dev_update_address; + } + result = 0; + d_printf(1, dev, "I: 4way handshke done, device authenticated\n"); + +error_dev_update_address: +error_wusbhc_set_gtk: +error_wusbhc_set_ptk: +error_hs3: +error_hs2: +error_hs1: + memset(hs, 0, 3*sizeof(hs[0])); + memset(&keydvt_out, 0, sizeof(keydvt_out)); + memset(&keydvt_in, 0, sizeof(keydvt_in)); + memset(&ccm_n, 0, sizeof(ccm_n)); + memset(mic, 0, sizeof(mic)); + if (result < 0) { + /* error path */ + wusb_dev_set_encryption(usb_dev, 0); + } +error_dev_set_encryption: + kfree(hs); +error_kzalloc: + return result; +} + +/* + * Once all connected and authenticated devices have received the new + * GTK, switch the host to using it. + */ +static void wusbhc_gtk_rekey_done_work(struct work_struct *work) +{ + struct wusbhc *wusbhc = container_of(work, struct wusbhc, gtk_rekey_done_work); + size_t key_size = sizeof(wusbhc->gtk.data); + + mutex_lock(&wusbhc->mutex); + + if (--wusbhc->pending_set_gtks == 0) + wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid, &wusbhc->gtk.descr.bKeyData, key_size); + + mutex_unlock(&wusbhc->mutex); +} + +static void wusbhc_set_gtk_callback(struct urb *urb) +{ + struct wusbhc *wusbhc = urb->context; + + queue_work(wusbd, &wusbhc->gtk_rekey_done_work); +} + +/** + * wusbhc_gtk_rekey - generate and distribute a new GTK + * @wusbhc: the WUSB host controller + * + * Generate a new GTK and distribute it to all connected and + * authenticated devices. When all devices have the new GTK, the host + * starts using it. + * + * This must be called after every device disconnect (see [WUSB] + * section 6.2.11.2). + */ +void wusbhc_gtk_rekey(struct wusbhc *wusbhc) +{ + static const size_t key_size = sizeof(wusbhc->gtk.data); + int p; + + wusbhc_generate_gtk(wusbhc); + + for (p = 0; p < wusbhc->ports_max; p++) { + struct wusb_dev *wusb_dev; + + wusb_dev = wusbhc->port[p].wusb_dev; + if (!wusb_dev || !wusb_dev->usb_dev | !wusb_dev->usb_dev->authenticated) + continue; + + usb_fill_control_urb(wusb_dev->set_gtk_urb, wusb_dev->usb_dev, + usb_sndctrlpipe(wusb_dev->usb_dev, 0), + (void *)wusb_dev->set_gtk_req, + &wusbhc->gtk.descr, wusbhc->gtk.descr.bLength, + wusbhc_set_gtk_callback, wusbhc); + if (usb_submit_urb(wusb_dev->set_gtk_urb, GFP_KERNEL) == 0) + wusbhc->pending_set_gtks++; + } + if (wusbhc->pending_set_gtks == 0) + wusbhc->set_gtk(wusbhc, wusbhc->gtk_tkid, &wusbhc->gtk.descr.bKeyData, key_size); +} diff --git a/drivers/usb/wusbcore/wa-hc.c b/drivers/usb/wusbcore/wa-hc.c new file mode 100644 index 000000000000..9d04722415bb --- /dev/null +++ b/drivers/usb/wusbcore/wa-hc.c @@ -0,0 +1,95 @@ +/* + * Wire Adapter Host Controller Driver + * Common items to HWA and DWA based HCDs + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ +#include "wusbhc.h" +#include "wa-hc.h" + +/** + * Assumes + * + * wa->usb_dev and wa->usb_iface initialized and refcounted, + * wa->wa_descr initialized. + */ +int wa_create(struct wahc *wa, struct usb_interface *iface) +{ + int result; + struct device *dev = &iface->dev; + + result = wa_rpipes_create(wa); + if (result < 0) + goto error_rpipes_create; + /* Fill up Data Transfer EP pointers */ + wa->dti_epd = &iface->cur_altsetting->endpoint[1].desc; + wa->dto_epd = &iface->cur_altsetting->endpoint[2].desc; + wa->xfer_result_size = le16_to_cpu(wa->dti_epd->wMaxPacketSize); + wa->xfer_result = kmalloc(wa->xfer_result_size, GFP_KERNEL); + if (wa->xfer_result == NULL) + goto error_xfer_result_alloc; + result = wa_nep_create(wa, iface); + if (result < 0) { + dev_err(dev, "WA-CDS: can't initialize notif endpoint: %d\n", + result); + goto error_nep_create; + } + return 0; + +error_nep_create: + kfree(wa->xfer_result); +error_xfer_result_alloc: + wa_rpipes_destroy(wa); +error_rpipes_create: + return result; +} +EXPORT_SYMBOL_GPL(wa_create); + + +void __wa_destroy(struct wahc *wa) +{ + if (wa->dti_urb) { + usb_kill_urb(wa->dti_urb); + usb_put_urb(wa->dti_urb); + usb_kill_urb(wa->buf_in_urb); + usb_put_urb(wa->buf_in_urb); + } + kfree(wa->xfer_result); + wa_nep_destroy(wa); + wa_rpipes_destroy(wa); +} +EXPORT_SYMBOL_GPL(__wa_destroy); + +/** + * wa_reset_all - reset the WA device + * @wa: the WA to be reset + * + * For HWAs the radio controller and all other PALs are also reset. + */ +void wa_reset_all(struct wahc *wa) +{ + /* FIXME: assuming HWA. */ + wusbhc_reset_all(wa->wusb); +} + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("Wireless USB Wire Adapter core"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/wusbcore/wa-hc.h b/drivers/usb/wusbcore/wa-hc.h new file mode 100644 index 000000000000..586d350cdb4d --- /dev/null +++ b/drivers/usb/wusbcore/wa-hc.h @@ -0,0 +1,417 @@ +/* + * HWA Host Controller Driver + * Wire Adapter Control/Data Streaming Iface (WUSB1.0[8]) + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * This driver implements a USB Host Controller (struct usb_hcd) for a + * Wireless USB Host Controller based on the Wireless USB 1.0 + * Host-Wire-Adapter specification (in layman terms, a USB-dongle that + * implements a Wireless USB host). + * + * Check out the Design-overview.txt file in the source documentation + * for other details on the implementation. + * + * Main blocks: + * + * driver glue with the driver API, workqueue daemon + * + * lc RC instance life cycle management (create, destroy...) + * + * hcd glue with the USB API Host Controller Interface API. + * + * nep Notification EndPoint managent: collect notifications + * and queue them with the workqueue daemon. + * + * Handle notifications as coming from the NEP. Sends them + * off others to their respective modules (eg: connect, + * disconnect and reset go to devconnect). + * + * rpipe Remote Pipe management; rpipe is what we use to write + * to an endpoint on a WUSB device that is connected to a + * HWA RC. + * + * xfer Transfer managment -- this is all the code that gets a + * buffer and pushes it to a device (or viceversa). * + * + * Some day a lot of this code will be shared between this driver and + * the drivers for DWA (xfer, rpipe). + * + * All starts at driver.c:hwahc_probe(), when one of this guys is + * connected. hwahc_disconnect() stops it. + * + * During operation, the main driver is devices connecting or + * disconnecting. They cause the HWA RC to send notifications into + * nep.c:hwahc_nep_cb() that will dispatch them to + * notif.c:wa_notif_dispatch(). From there they will fan to cause + * device connects, disconnects, etc. + * + * Note much of the activity is difficult to follow. For example a + * device connect goes to devconnect, which will cause the "fake" root + * hub port to show a connect and stop there. Then khubd will notice + * and call into the rh.c:hwahc_rc_port_reset() code to authenticate + * the device (and this might require user intervention) and enable + * the port. + * + * We also have a timer workqueue going from devconnect.c that + * schedules in hwahc_devconnect_create(). + * + * The rest of the traffic is in the usual entry points of a USB HCD, + * which are hooked up in driver.c:hwahc_rc_driver, and defined in + * hcd.c. + */ + +#ifndef __HWAHC_INTERNAL_H__ +#define __HWAHC_INTERNAL_H__ + +#include <linux/completion.h> +#include <linux/usb.h> +#include <linux/mutex.h> +#include <linux/spinlock.h> +#include <linux/uwb.h> +#include <linux/usb/wusb.h> +#include <linux/usb/wusb-wa.h> + +struct wusbhc; +struct wahc; +extern void wa_urb_enqueue_run(struct work_struct *ws); + +/** + * RPipe instance + * + * @descr's fields are kept in LE, as we need to send it back and + * forth. + * + * @wa is referenced when set + * + * @segs_available is the number of requests segments that still can + * be submitted to the controller without overloading + * it. It is initialized to descr->wRequests when + * aiming. + * + * A rpipe supports a max of descr->wRequests at the same time; before + * submitting seg_lock has to be taken. If segs_avail > 0, then we can + * submit; if not, we have to queue them. + */ +struct wa_rpipe { + struct kref refcnt; + struct usb_rpipe_descriptor descr; + struct usb_host_endpoint *ep; + struct wahc *wa; + spinlock_t seg_lock; + struct list_head seg_list; + atomic_t segs_available; + u8 buffer[1]; /* For reads/writes on USB */ +}; + + +/** + * Instance of a HWA Host Controller + * + * Except where a more specific lock/mutex applies or atomic, all + * fields protected by @mutex. + * + * @wa_descr Can be accessed without locking because it is in + * the same area where the device descriptors were + * read, so it is guaranteed to exist umodified while + * the device exists. + * + * Endianess has been converted to CPU's. + * + * @nep_* can be accessed without locking as its processing is + * serialized; we submit a NEP URB and it comes to + * hwahc_nep_cb(), which won't issue another URB until it is + * done processing it. + * + * @xfer_list: + * + * List of active transfers to verify existence from a xfer id + * gotten from the xfer result message. Can't use urb->list because + * it goes by endpoint, and we don't know the endpoint at the time + * when we get the xfer result message. We can't really rely on the + * pointer (will have to change for 64 bits) as the xfer id is 32 bits. + * + * @xfer_delayed_list: List of transfers that need to be started + * (with a workqueue, because they were + * submitted from an atomic context). + * + * FIXME: this needs to be layered up: a wusbhc layer (for sharing + * comonalities with WHCI), a wa layer (for sharing + * comonalities with DWA-RC). + */ +struct wahc { + struct usb_device *usb_dev; + struct usb_interface *usb_iface; + + /* HC to deliver notifications */ + union { + struct wusbhc *wusb; + struct dwahc *dwa; + }; + + const struct usb_endpoint_descriptor *dto_epd, *dti_epd; + const struct usb_wa_descriptor *wa_descr; + + struct urb *nep_urb; /* Notification EndPoint [lockless] */ + struct edc nep_edc; + void *nep_buffer; + size_t nep_buffer_size; + + atomic_t notifs_queued; + + u16 rpipes; + unsigned long *rpipe_bm; /* rpipe usage bitmap */ + spinlock_t rpipe_bm_lock; /* protect rpipe_bm */ + struct mutex rpipe_mutex; /* assigning resources to endpoints */ + + struct urb *dti_urb; /* URB for reading xfer results */ + struct urb *buf_in_urb; /* URB for reading data in */ + struct edc dti_edc; /* DTI error density counter */ + struct wa_xfer_result *xfer_result; /* real size = dti_ep maxpktsize */ + size_t xfer_result_size; + + s32 status; /* For reading status */ + + struct list_head xfer_list; + struct list_head xfer_delayed_list; + spinlock_t xfer_list_lock; + struct work_struct xfer_work; + atomic_t xfer_id_count; +}; + + +extern int wa_create(struct wahc *wa, struct usb_interface *iface); +extern void __wa_destroy(struct wahc *wa); +void wa_reset_all(struct wahc *wa); + + +/* Miscellaneous constants */ +enum { + /** Max number of EPROTO errors we tolerate on the NEP in a + * period of time */ + HWAHC_EPROTO_MAX = 16, + /** Period of time for EPROTO errors (in jiffies) */ + HWAHC_EPROTO_PERIOD = 4 * HZ, +}; + + +/* Notification endpoint handling */ +extern int wa_nep_create(struct wahc *, struct usb_interface *); +extern void wa_nep_destroy(struct wahc *); + +static inline int wa_nep_arm(struct wahc *wa, gfp_t gfp_mask) +{ + struct urb *urb = wa->nep_urb; + urb->transfer_buffer = wa->nep_buffer; + urb->transfer_buffer_length = wa->nep_buffer_size; + return usb_submit_urb(urb, gfp_mask); +} + +static inline void wa_nep_disarm(struct wahc *wa) +{ + usb_kill_urb(wa->nep_urb); +} + + +/* RPipes */ +static inline void wa_rpipe_init(struct wahc *wa) +{ + spin_lock_init(&wa->rpipe_bm_lock); + mutex_init(&wa->rpipe_mutex); +} + +static inline void wa_init(struct wahc *wa) +{ + edc_init(&wa->nep_edc); + atomic_set(&wa->notifs_queued, 0); + wa_rpipe_init(wa); + edc_init(&wa->dti_edc); + INIT_LIST_HEAD(&wa->xfer_list); + INIT_LIST_HEAD(&wa->xfer_delayed_list); + spin_lock_init(&wa->xfer_list_lock); + INIT_WORK(&wa->xfer_work, wa_urb_enqueue_run); + atomic_set(&wa->xfer_id_count, 1); +} + +/** + * Destroy a pipe (when refcount drops to zero) + * + * Assumes it has been moved to the "QUIESCING" state. + */ +struct wa_xfer; +extern void rpipe_destroy(struct kref *_rpipe); +static inline +void __rpipe_get(struct wa_rpipe *rpipe) +{ + kref_get(&rpipe->refcnt); +} +extern int rpipe_get_by_ep(struct wahc *, struct usb_host_endpoint *, + struct urb *, gfp_t); +static inline void rpipe_put(struct wa_rpipe *rpipe) +{ + kref_put(&rpipe->refcnt, rpipe_destroy); + +} +extern void rpipe_ep_disable(struct wahc *, struct usb_host_endpoint *); +extern int wa_rpipes_create(struct wahc *); +extern void wa_rpipes_destroy(struct wahc *); +static inline void rpipe_avail_dec(struct wa_rpipe *rpipe) +{ + atomic_dec(&rpipe->segs_available); +} + +/** + * Returns true if the rpipe is ready to submit more segments. + */ +static inline int rpipe_avail_inc(struct wa_rpipe *rpipe) +{ + return atomic_inc_return(&rpipe->segs_available) > 0 + && !list_empty(&rpipe->seg_list); +} + + +/* Transferring data */ +extern int wa_urb_enqueue(struct wahc *, struct usb_host_endpoint *, + struct urb *, gfp_t); +extern int wa_urb_dequeue(struct wahc *, struct urb *); +extern void wa_handle_notif_xfer(struct wahc *, struct wa_notif_hdr *); + + +/* Misc + * + * FIXME: Refcounting for the actual @hwahc object is not correct; I + * mean, this should be refcounting on the HCD underneath, but + * it is not. In any case, the semantics for HCD refcounting + * are *weird*...on refcount reaching zero it just frees + * it...no RC specific function is called...unless I miss + * something. + * + * FIXME: has to go away in favour of an 'struct' hcd based sollution + */ +static inline struct wahc *wa_get(struct wahc *wa) +{ + usb_get_intf(wa->usb_iface); + return wa; +} + +static inline void wa_put(struct wahc *wa) +{ + usb_put_intf(wa->usb_iface); +} + + +static inline int __wa_feature(struct wahc *wa, unsigned op, u16 feature) +{ + return usb_control_msg(wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + op ? USB_REQ_SET_FEATURE : USB_REQ_CLEAR_FEATURE, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + feature, + wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, + NULL, 0, 1000 /* FIXME: arbitrary */); +} + + +static inline int __wa_set_feature(struct wahc *wa, u16 feature) +{ + return __wa_feature(wa, 1, feature); +} + + +static inline int __wa_clear_feature(struct wahc *wa, u16 feature) +{ + return __wa_feature(wa, 0, feature); +} + + +/** + * Return the status of a Wire Adapter + * + * @wa: Wire Adapter instance + * @returns < 0 errno code on error, or status bitmap as described + * in WUSB1.0[8.3.1.6]. + * + * NOTE: need malloc, some arches don't take USB from the stack + */ +static inline +s32 __wa_get_status(struct wahc *wa) +{ + s32 result; + result = usb_control_msg( + wa->usb_dev, usb_rcvctrlpipe(wa->usb_dev, 0), + USB_REQ_GET_STATUS, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, wa->usb_iface->cur_altsetting->desc.bInterfaceNumber, + &wa->status, sizeof(wa->status), + 1000 /* FIXME: arbitrary */); + if (result >= 0) + result = wa->status; + return result; +} + + +/** + * Waits until the Wire Adapter's status matches @mask/@value + * + * @wa: Wire Adapter instance. + * @returns < 0 errno code on error, otherwise status. + * + * Loop until the WAs status matches the mask and value (status & mask + * == value). Timeout if it doesn't happen. + * + * FIXME: is there an official specification on how long status + * changes can take? + */ +static inline s32 __wa_wait_status(struct wahc *wa, u32 mask, u32 value) +{ + s32 result; + unsigned loops = 10; + do { + msleep(50); + result = __wa_get_status(wa); + if ((result & mask) == value) + break; + if (loops-- == 0) { + result = -ETIMEDOUT; + break; + } + } while (result >= 0); + return result; +} + + +/** Command @hwahc to stop, @returns 0 if ok, < 0 errno code on error */ +static inline int __wa_stop(struct wahc *wa) +{ + int result; + struct device *dev = &wa->usb_iface->dev; + + result = __wa_clear_feature(wa, WA_ENABLE); + if (result < 0 && result != -ENODEV) { + dev_err(dev, "error commanding HC to stop: %d\n", result); + goto out; + } + result = __wa_wait_status(wa, WA_ENABLE, 0); + if (result < 0 && result != -ENODEV) + dev_err(dev, "error waiting for HC to stop: %d\n", result); +out: + return 0; +} + + +#endif /* #ifndef __HWAHC_INTERNAL_H__ */ diff --git a/drivers/usb/wusbcore/wa-nep.c b/drivers/usb/wusbcore/wa-nep.c new file mode 100644 index 000000000000..3f542990c73f --- /dev/null +++ b/drivers/usb/wusbcore/wa-nep.c @@ -0,0 +1,310 @@ +/* + * WUSB Wire Adapter: Control/Data Streaming Interface (WUSB[8]) + * Notification EndPoint support + * + * Copyright (C) 2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * This part takes care of getting the notification from the hw + * only and dispatching through wusbwad into + * wa_notif_dispatch. Handling is done there. + * + * WA notifications are limited in size; most of them are three or + * four bytes long, and the longest is the HWA Device Notification, + * which would not exceed 38 bytes (DNs are limited in payload to 32 + * bytes plus 3 bytes header (WUSB1.0[7.6p2]), plus 3 bytes HWA + * header (WUSB1.0[8.5.4.2]). + * + * It is not clear if more than one Device Notification can be packed + * in a HWA Notification, I assume no because of the wording in + * WUSB1.0[8.5.4.2]. In any case, the bigger any notification could + * get is 256 bytes (as the bLength field is a byte). + * + * So what we do is we have this buffer and read into it; when a + * notification arrives we schedule work to a specific, single thread + * workqueue (so notifications are serialized) and copy the + * notification data. After scheduling the work, we rearm the read from + * the notification endpoint. + * + * Entry points here are: + * + * wa_nep_[create|destroy]() To initialize/release this subsystem + * + * wa_nep_cb() Callback for the notification + * endpoint; when data is ready, this + * does the dispatching. + */ +#include <linux/workqueue.h> +#include <linux/ctype.h> +#include <linux/uwb/debug.h> +#include "wa-hc.h" +#include "wusbhc.h" + +/* Structure for queueing notifications to the workqueue */ +struct wa_notif_work { + struct work_struct work; + struct wahc *wa; + size_t size; + u8 data[]; +}; + +/* + * Process incoming notifications from the WA's Notification EndPoint + * [the wuswad daemon, basically] + * + * @_nw: Pointer to a descriptor which has the pointer to the + * @wa, the size of the buffer and the work queue + * structure (so we can free all when done). + * @returns 0 if ok, < 0 errno code on error. + * + * All notifications follow the same format; they need to start with a + * 'struct wa_notif_hdr' header, so it is easy to parse through + * them. We just break the buffer in individual notifications (the + * standard doesn't say if it can be done or is forbidden, so we are + * cautious) and dispatch each. + * + * So the handling layers are is: + * + * WA specific notification (from NEP) + * Device Notification Received -> wa_handle_notif_dn() + * WUSB Device notification generic handling + * BPST Adjustment -> wa_handle_notif_bpst_adj() + * ... -> ... + * + * @wa has to be referenced + */ +static void wa_notif_dispatch(struct work_struct *ws) +{ + void *itr; + u8 missing = 0; + struct wa_notif_work *nw = container_of(ws, struct wa_notif_work, work); + struct wahc *wa = nw->wa; + struct wa_notif_hdr *notif_hdr; + size_t size; + + struct device *dev = &wa->usb_iface->dev; + +#if 0 + /* FIXME: need to check for this??? */ + if (usb_hcd->state == HC_STATE_QUIESCING) /* Going down? */ + goto out; /* screw it */ +#endif + atomic_dec(&wa->notifs_queued); /* Throttling ctl */ + dev = &wa->usb_iface->dev; + size = nw->size; + itr = nw->data; + + while (size) { + if (size < sizeof(*notif_hdr)) { + missing = sizeof(*notif_hdr) - size; + goto exhausted_buffer; + } + notif_hdr = itr; + if (size < notif_hdr->bLength) + goto exhausted_buffer; + itr += notif_hdr->bLength; + size -= notif_hdr->bLength; + /* Dispatch the notification [don't use itr or size!] */ + switch (notif_hdr->bNotifyType) { + case HWA_NOTIF_DN: { + struct hwa_notif_dn *hwa_dn; + hwa_dn = container_of(notif_hdr, struct hwa_notif_dn, + hdr); + wusbhc_handle_dn(wa->wusb, hwa_dn->bSourceDeviceAddr, + hwa_dn->dndata, + notif_hdr->bLength - sizeof(*hwa_dn)); + break; + } + case WA_NOTIF_TRANSFER: + wa_handle_notif_xfer(wa, notif_hdr); + break; + case DWA_NOTIF_RWAKE: + case DWA_NOTIF_PORTSTATUS: + case HWA_NOTIF_BPST_ADJ: + /* FIXME: unimplemented WA NOTIFs */ + /* fallthru */ + default: + if (printk_ratelimit()) { + dev_err(dev, "HWA: unknown notification 0x%x, " + "%zu bytes; discarding\n", + notif_hdr->bNotifyType, + (size_t)notif_hdr->bLength); + dump_bytes(dev, notif_hdr, 16); + } + break; + } + } +out: + wa_put(wa); + kfree(nw); + return; + + /* THIS SHOULD NOT HAPPEN + * + * Buffer exahusted with partial data remaining; just warn and + * discard the data, as this should not happen. + */ +exhausted_buffer: + if (!printk_ratelimit()) + goto out; + dev_warn(dev, "HWA: device sent short notification, " + "%d bytes missing; discarding %d bytes.\n", + missing, (int)size); + dump_bytes(dev, itr, size); + goto out; +} + +/* + * Deliver incoming WA notifications to the wusbwa workqueue + * + * @wa: Pointer the Wire Adapter Controller Data Streaming + * instance (part of an 'struct usb_hcd'). + * @size: Size of the received buffer + * @returns 0 if ok, < 0 errno code on error. + * + * The input buffer is @wa->nep_buffer, with @size bytes + * (guaranteed to fit in the allocated space, + * @wa->nep_buffer_size). + */ +static int wa_nep_queue(struct wahc *wa, size_t size) +{ + int result = 0; + struct device *dev = &wa->usb_iface->dev; + struct wa_notif_work *nw; + + /* dev_fnstart(dev, "(wa %p, size %zu)\n", wa, size); */ + BUG_ON(size > wa->nep_buffer_size); + if (size == 0) + goto out; + if (atomic_read(&wa->notifs_queued) > 200) { + if (printk_ratelimit()) + dev_err(dev, "Too many notifications queued, " + "throttling back\n"); + goto out; + } + nw = kzalloc(sizeof(*nw) + size, GFP_ATOMIC); + if (nw == NULL) { + if (printk_ratelimit()) + dev_err(dev, "No memory to queue notification\n"); + goto out; + } + INIT_WORK(&nw->work, wa_notif_dispatch); + nw->wa = wa_get(wa); + nw->size = size; + memcpy(nw->data, wa->nep_buffer, size); + atomic_inc(&wa->notifs_queued); /* Throttling ctl */ + queue_work(wusbd, &nw->work); +out: + /* dev_fnend(dev, "(wa %p, size %zu) = result\n", wa, size, result); */ + return result; +} + +/* + * Callback for the notification event endpoint + * + * Check's that everything is fine and then passes the data to be + * queued to the workqueue. + */ +static void wa_nep_cb(struct urb *urb) +{ + int result; + struct wahc *wa = urb->context; + struct device *dev = &wa->usb_iface->dev; + + switch (result = urb->status) { + case 0: + result = wa_nep_queue(wa, urb->actual_length); + if (result < 0) + dev_err(dev, "NEP: unable to process notification(s): " + "%d\n", result); + break; + case -ECONNRESET: /* Not an error, but a controlled situation; */ + case -ENOENT: /* (we killed the URB)...so, no broadcast */ + case -ESHUTDOWN: + dev_dbg(dev, "NEP: going down %d\n", urb->status); + goto out; + default: /* On general errors, we retry unless it gets ugly */ + if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, + EDC_ERROR_TIMEFRAME)) { + dev_err(dev, "NEP: URB max acceptable errors " + "exceeded, resetting device\n"); + wa_reset_all(wa); + goto out; + } + dev_err(dev, "NEP: URB error %d\n", urb->status); + } + result = wa_nep_arm(wa, GFP_ATOMIC); + if (result < 0) { + dev_err(dev, "NEP: cannot submit URB: %d\n", result); + wa_reset_all(wa); + } +out: + return; +} + +/* + * Initialize @wa's notification and event's endpoint stuff + * + * This includes the allocating the read buffer, the context ID + * allocation bitmap, the URB and submitting the URB. + */ +int wa_nep_create(struct wahc *wa, struct usb_interface *iface) +{ + int result; + struct usb_endpoint_descriptor *epd; + struct usb_device *usb_dev = interface_to_usbdev(iface); + struct device *dev = &iface->dev; + + edc_init(&wa->nep_edc); + epd = &iface->cur_altsetting->endpoint[0].desc; + wa->nep_buffer_size = 1024; + wa->nep_buffer = kmalloc(wa->nep_buffer_size, GFP_KERNEL); + if (wa->nep_buffer == NULL) { + dev_err(dev, "Unable to allocate notification's read buffer\n"); + goto error_nep_buffer; + } + wa->nep_urb = usb_alloc_urb(0, GFP_KERNEL); + if (wa->nep_urb == NULL) { + dev_err(dev, "Unable to allocate notification URB\n"); + goto error_urb_alloc; + } + usb_fill_int_urb(wa->nep_urb, usb_dev, + usb_rcvintpipe(usb_dev, epd->bEndpointAddress), + wa->nep_buffer, wa->nep_buffer_size, + wa_nep_cb, wa, epd->bInterval); + result = wa_nep_arm(wa, GFP_KERNEL); + if (result < 0) { + dev_err(dev, "Cannot submit notification URB: %d\n", result); + goto error_nep_arm; + } + return 0; + +error_nep_arm: + usb_free_urb(wa->nep_urb); +error_urb_alloc: + kfree(wa->nep_buffer); +error_nep_buffer: + return -ENOMEM; +} + +void wa_nep_destroy(struct wahc *wa) +{ + wa_nep_disarm(wa); + usb_free_urb(wa->nep_urb); + kfree(wa->nep_buffer); +} diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c new file mode 100644 index 000000000000..f18e4aae66e9 --- /dev/null +++ b/drivers/usb/wusbcore/wa-rpipe.c @@ -0,0 +1,562 @@ +/* + * WUSB Wire Adapter + * rpipe management + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + * + * RPIPE + * + * Targetted at different downstream endpoints + * + * Descriptor: use to config the remote pipe. + * + * The number of blocks could be dynamic (wBlocks in descriptor is + * 0)--need to schedule them then. + * + * Each bit in wa->rpipe_bm represents if an rpipe is being used or + * not. Rpipes are represented with a 'struct wa_rpipe' that is + * attached to the hcpriv member of a 'struct usb_host_endpoint'. + * + * When you need to xfer data to an endpoint, you get an rpipe for it + * with wa_ep_rpipe_get(), which gives you a reference to the rpipe + * and keeps a single one (the first one) with the endpoint. When you + * are done transferring, you drop that reference. At the end the + * rpipe is always allocated and bound to the endpoint. There it might + * be recycled when not used. + * + * Addresses: + * + * We use a 1:1 mapping mechanism between port address (0 based + * index, actually) and the address. The USB stack knows about this. + * + * USB Stack port number 4 (1 based) + * WUSB code port index 3 (0 based) + * USB Addresss 5 (2 based -- 0 is for default, 1 for root hub) + * + * Now, because we don't use the concept as default address exactly + * like the (wired) USB code does, we need to kind of skip it. So we + * never take addresses from the urb->pipe, but from the + * urb->dev->devnum, to make sure that we always have the right + * destination address. + */ +#include <linux/init.h> +#include <asm/atomic.h> +#include <linux/bitmap.h> +#include "wusbhc.h" +#include "wa-hc.h" + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + + +static int __rpipe_get_descr(struct wahc *wa, + struct usb_rpipe_descriptor *descr, u16 index) +{ + ssize_t result; + struct device *dev = &wa->usb_iface->dev; + + /* Get the RPIPE descriptor -- we cannot use the usb_get_descriptor() + * function because the arguments are different. + */ + d_printf(1, dev, "rpipe %u: get descr\n", index); + result = usb_control_msg( + wa->usb_dev, usb_rcvctrlpipe(wa->usb_dev, 0), + USB_REQ_GET_DESCRIPTOR, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_RPIPE, + USB_DT_RPIPE<<8, index, descr, sizeof(*descr), + 1000 /* FIXME: arbitrary */); + if (result < 0) { + dev_err(dev, "rpipe %u: get descriptor failed: %d\n", + index, (int)result); + goto error; + } + if (result < sizeof(*descr)) { + dev_err(dev, "rpipe %u: got short descriptor " + "(%zd vs %zd bytes needed)\n", + index, result, sizeof(*descr)); + result = -EINVAL; + goto error; + } + result = 0; + +error: + return result; +} + +/* + * + * The descriptor is assumed to be properly initialized (ie: you got + * it through __rpipe_get_descr()). + */ +static int __rpipe_set_descr(struct wahc *wa, + struct usb_rpipe_descriptor *descr, u16 index) +{ + ssize_t result; + struct device *dev = &wa->usb_iface->dev; + + /* we cannot use the usb_get_descriptor() function because the + * arguments are different. + */ + d_printf(1, dev, "rpipe %u: set descr\n", index); + result = usb_control_msg( + wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + USB_REQ_SET_DESCRIPTOR, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE, + USB_DT_RPIPE<<8, index, descr, sizeof(*descr), + HZ / 10); + if (result < 0) { + dev_err(dev, "rpipe %u: set descriptor failed: %d\n", + index, (int)result); + goto error; + } + if (result < sizeof(*descr)) { + dev_err(dev, "rpipe %u: sent short descriptor " + "(%zd vs %zd bytes required)\n", + index, result, sizeof(*descr)); + result = -EINVAL; + goto error; + } + result = 0; + +error: + return result; + +} + +static void rpipe_init(struct wa_rpipe *rpipe) +{ + kref_init(&rpipe->refcnt); + spin_lock_init(&rpipe->seg_lock); + INIT_LIST_HEAD(&rpipe->seg_list); +} + +static unsigned rpipe_get_idx(struct wahc *wa, unsigned rpipe_idx) +{ + unsigned long flags; + + spin_lock_irqsave(&wa->rpipe_bm_lock, flags); + rpipe_idx = find_next_zero_bit(wa->rpipe_bm, wa->rpipes, rpipe_idx); + if (rpipe_idx < wa->rpipes) + set_bit(rpipe_idx, wa->rpipe_bm); + spin_unlock_irqrestore(&wa->rpipe_bm_lock, flags); + + return rpipe_idx; +} + +static void rpipe_put_idx(struct wahc *wa, unsigned rpipe_idx) +{ + unsigned long flags; + + spin_lock_irqsave(&wa->rpipe_bm_lock, flags); + clear_bit(rpipe_idx, wa->rpipe_bm); + spin_unlock_irqrestore(&wa->rpipe_bm_lock, flags); +} + +void rpipe_destroy(struct kref *_rpipe) +{ + struct wa_rpipe *rpipe = container_of(_rpipe, struct wa_rpipe, refcnt); + u8 index = le16_to_cpu(rpipe->descr.wRPipeIndex); + d_fnstart(1, NULL, "(rpipe %p %u)\n", rpipe, index); + if (rpipe->ep) + rpipe->ep->hcpriv = NULL; + rpipe_put_idx(rpipe->wa, index); + wa_put(rpipe->wa); + kfree(rpipe); + d_fnend(1, NULL, "(rpipe %p %u)\n", rpipe, index); +} +EXPORT_SYMBOL_GPL(rpipe_destroy); + +/* + * Locate an idle rpipe, create an structure for it and return it + * + * @wa is referenced and unlocked + * @crs enum rpipe_attr, required endpoint characteristics + * + * The rpipe can be used only sequentially (not in parallel). + * + * The rpipe is moved into the "ready" state. + */ +static int rpipe_get_idle(struct wa_rpipe **prpipe, struct wahc *wa, u8 crs, + gfp_t gfp) +{ + int result; + unsigned rpipe_idx; + struct wa_rpipe *rpipe; + struct device *dev = &wa->usb_iface->dev; + + d_fnstart(3, dev, "(wa %p crs 0x%02x)\n", wa, crs); + rpipe = kzalloc(sizeof(*rpipe), gfp); + if (rpipe == NULL) + return -ENOMEM; + rpipe_init(rpipe); + + /* Look for an idle pipe */ + for (rpipe_idx = 0; rpipe_idx < wa->rpipes; rpipe_idx++) { + rpipe_idx = rpipe_get_idx(wa, rpipe_idx); + if (rpipe_idx >= wa->rpipes) /* no more pipes :( */ + break; + result = __rpipe_get_descr(wa, &rpipe->descr, rpipe_idx); + if (result < 0) + dev_err(dev, "Can't get descriptor for rpipe %u: %d\n", + rpipe_idx, result); + else if ((rpipe->descr.bmCharacteristics & crs) != 0) + goto found; + rpipe_put_idx(wa, rpipe_idx); + } + *prpipe = NULL; + kfree(rpipe); + d_fnend(3, dev, "(wa %p crs 0x%02x) = -ENXIO\n", wa, crs); + return -ENXIO; + +found: + set_bit(rpipe_idx, wa->rpipe_bm); + rpipe->wa = wa_get(wa); + *prpipe = rpipe; + d_fnstart(3, dev, "(wa %p crs 0x%02x) = 0\n", wa, crs); + return 0; +} + +static int __rpipe_reset(struct wahc *wa, unsigned index) +{ + int result; + struct device *dev = &wa->usb_iface->dev; + + d_printf(1, dev, "rpipe %u: reset\n", index); + result = usb_control_msg( + wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0), + USB_REQ_RPIPE_RESET, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE, + 0, index, NULL, 0, 1000 /* FIXME: arbitrary */); + if (result < 0) + dev_err(dev, "rpipe %u: reset failed: %d\n", + index, result); + return result; +} + +/* + * Fake companion descriptor for ep0 + * + * See WUSB1.0[7.4.4], most of this is zero for bulk/int/ctl + */ +static struct usb_wireless_ep_comp_descriptor epc0 = { + .bLength = sizeof(epc0), + .bDescriptorType = USB_DT_WIRELESS_ENDPOINT_COMP, +/* .bMaxBurst = 1, */ + .bMaxSequence = 31, +}; + +/* + * Look for EP companion descriptor + * + * Get there, look for Inara in the endpoint's extra descriptors + */ +static struct usb_wireless_ep_comp_descriptor *rpipe_epc_find( + struct device *dev, struct usb_host_endpoint *ep) +{ + void *itr; + size_t itr_size; + struct usb_descriptor_header *hdr; + struct usb_wireless_ep_comp_descriptor *epcd; + + d_fnstart(3, dev, "(ep %p)\n", ep); + if (ep->desc.bEndpointAddress == 0) { + epcd = &epc0; + goto out; + } + itr = ep->extra; + itr_size = ep->extralen; + epcd = NULL; + while (itr_size > 0) { + if (itr_size < sizeof(*hdr)) { + dev_err(dev, "HW Bug? ep 0x%02x: extra descriptors " + "at offset %zu: only %zu bytes left\n", + ep->desc.bEndpointAddress, + itr - (void *) ep->extra, itr_size); + break; + } + hdr = itr; + if (hdr->bDescriptorType == USB_DT_WIRELESS_ENDPOINT_COMP) { + epcd = itr; + break; + } + if (hdr->bLength > itr_size) { + dev_err(dev, "HW Bug? ep 0x%02x: extra descriptor " + "at offset %zu (type 0x%02x) " + "length %d but only %zu bytes left\n", + ep->desc.bEndpointAddress, + itr - (void *) ep->extra, hdr->bDescriptorType, + hdr->bLength, itr_size); + break; + } + itr += hdr->bLength; + itr_size -= hdr->bDescriptorType; + } +out: + d_fnend(3, dev, "(ep %p) = %p\n", ep, epcd); + return epcd; +} + +/* + * Aim an rpipe to its device & endpoint destination + * + * Make sure we change the address to unauthenticathed if the device + * is WUSB and it is not authenticated. + */ +static int rpipe_aim(struct wa_rpipe *rpipe, struct wahc *wa, + struct usb_host_endpoint *ep, struct urb *urb, gfp_t gfp) +{ + int result = -ENOMSG; /* better code for lack of companion? */ + struct device *dev = &wa->usb_iface->dev; + struct usb_device *usb_dev = urb->dev; + struct usb_wireless_ep_comp_descriptor *epcd; + u8 unauth; + + d_fnstart(3, dev, "(rpipe %p wa %p ep %p, urb %p)\n", + rpipe, wa, ep, urb); + epcd = rpipe_epc_find(dev, ep); + if (epcd == NULL) { + dev_err(dev, "ep 0x%02x: can't find companion descriptor\n", + ep->desc.bEndpointAddress); + goto error; + } + unauth = usb_dev->wusb && !usb_dev->authenticated ? 0x80 : 0; + __rpipe_reset(wa, le16_to_cpu(rpipe->descr.wRPipeIndex)); + atomic_set(&rpipe->segs_available, le16_to_cpu(rpipe->descr.wRequests)); + /* FIXME: block allocation system; request with queuing and timeout */ + /* FIXME: compute so seg_size > ep->maxpktsize */ + rpipe->descr.wBlocks = cpu_to_le16(16); /* given */ + /* ep0 maxpktsize is 0x200 (WUSB1.0[4.8.1]) */ + rpipe->descr.wMaxPacketSize = cpu_to_le16(ep->desc.wMaxPacketSize); + rpipe->descr.bHSHubAddress = 0; /* reserved: zero */ + rpipe->descr.bHSHubPort = wusb_port_no_to_idx(urb->dev->portnum); + /* FIXME: use maximum speed as supported or recommended by device */ + rpipe->descr.bSpeed = usb_pipeendpoint(urb->pipe) == 0 ? + UWB_PHY_RATE_53 : UWB_PHY_RATE_200; + d_printf(2, dev, "addr %u (0x%02x) rpipe #%u ep# %u speed %d\n", + urb->dev->devnum, urb->dev->devnum | unauth, + le16_to_cpu(rpipe->descr.wRPipeIndex), + usb_pipeendpoint(urb->pipe), rpipe->descr.bSpeed); + /* see security.c:wusb_update_address() */ + if (unlikely(urb->dev->devnum == 0x80)) + rpipe->descr.bDeviceAddress = 0; + else + rpipe->descr.bDeviceAddress = urb->dev->devnum | unauth; + rpipe->descr.bEndpointAddress = ep->desc.bEndpointAddress; + /* FIXME: bDataSequence */ + rpipe->descr.bDataSequence = 0; + /* FIXME: dwCurrentWindow */ + rpipe->descr.dwCurrentWindow = cpu_to_le32(1); + /* FIXME: bMaxDataSequence */ + rpipe->descr.bMaxDataSequence = epcd->bMaxSequence - 1; + rpipe->descr.bInterval = ep->desc.bInterval; + /* FIXME: bOverTheAirInterval */ + rpipe->descr.bOverTheAirInterval = 0; /* 0 if not isoc */ + /* FIXME: xmit power & preamble blah blah */ + rpipe->descr.bmAttribute = ep->desc.bmAttributes & 0x03; + /* rpipe->descr.bmCharacteristics RO */ + /* FIXME: bmRetryOptions */ + rpipe->descr.bmRetryOptions = 15; + /* FIXME: use for assessing link quality? */ + rpipe->descr.wNumTransactionErrors = 0; + result = __rpipe_set_descr(wa, &rpipe->descr, + le16_to_cpu(rpipe->descr.wRPipeIndex)); + if (result < 0) { + dev_err(dev, "Cannot aim rpipe: %d\n", result); + goto error; + } + result = 0; +error: + d_fnend(3, dev, "(rpipe %p wa %p ep %p urb %p) = %d\n", + rpipe, wa, ep, urb, result); + return result; +} + +/* + * Check an aimed rpipe to make sure it points to where we want + * + * We use bit 19 of the Linux USB pipe bitmap for unauth vs auth + * space; when it is like that, we or 0x80 to make an unauth address. + */ +static int rpipe_check_aim(const struct wa_rpipe *rpipe, const struct wahc *wa, + const struct usb_host_endpoint *ep, + const struct urb *urb, gfp_t gfp) +{ + int result = 0; /* better code for lack of companion? */ + struct device *dev = &wa->usb_iface->dev; + struct usb_device *usb_dev = urb->dev; + u8 unauth = (usb_dev->wusb && !usb_dev->authenticated) ? 0x80 : 0; + u8 portnum = wusb_port_no_to_idx(urb->dev->portnum); + + d_fnstart(3, dev, "(rpipe %p wa %p ep %p, urb %p)\n", + rpipe, wa, ep, urb); +#define AIM_CHECK(rdf, val, text) \ + do { \ + if (rpipe->descr.rdf != (val)) { \ + dev_err(dev, \ + "rpipe aim discrepancy: " #rdf " " text "\n", \ + rpipe->descr.rdf, (val)); \ + result = -EINVAL; \ + WARN_ON(1); \ + } \ + } while (0) + AIM_CHECK(wMaxPacketSize, cpu_to_le16(ep->desc.wMaxPacketSize), + "(%u vs %u)"); + AIM_CHECK(bHSHubPort, portnum, "(%u vs %u)"); + AIM_CHECK(bSpeed, usb_pipeendpoint(urb->pipe) == 0 ? + UWB_PHY_RATE_53 : UWB_PHY_RATE_200, + "(%u vs %u)"); + AIM_CHECK(bDeviceAddress, urb->dev->devnum | unauth, "(%u vs %u)"); + AIM_CHECK(bEndpointAddress, ep->desc.bEndpointAddress, "(%u vs %u)"); + AIM_CHECK(bInterval, ep->desc.bInterval, "(%u vs %u)"); + AIM_CHECK(bmAttribute, ep->desc.bmAttributes & 0x03, "(%u vs %u)"); +#undef AIM_CHECK + return result; +} + +#ifndef CONFIG_BUG +#define CONFIG_BUG 0 +#endif + +/* + * Make sure there is an rpipe allocated for an endpoint + * + * If already allocated, we just refcount it; if not, we get an + * idle one, aim it to the right location and take it. + * + * Attaches to ep->hcpriv and rpipe->ep to ep. + */ +int rpipe_get_by_ep(struct wahc *wa, struct usb_host_endpoint *ep, + struct urb *urb, gfp_t gfp) +{ + int result = 0; + struct device *dev = &wa->usb_iface->dev; + struct wa_rpipe *rpipe; + u8 eptype; + + d_fnstart(3, dev, "(wa %p ep %p urb %p gfp 0x%08x)\n", wa, ep, urb, + gfp); + mutex_lock(&wa->rpipe_mutex); + rpipe = ep->hcpriv; + if (rpipe != NULL) { + if (CONFIG_BUG == 1) { + result = rpipe_check_aim(rpipe, wa, ep, urb, gfp); + if (result < 0) + goto error; + } + __rpipe_get(rpipe); + d_printf(2, dev, "ep 0x%02x: reusing rpipe %u\n", + ep->desc.bEndpointAddress, + le16_to_cpu(rpipe->descr.wRPipeIndex)); + } else { + /* hmm, assign idle rpipe, aim it */ + result = -ENOBUFS; + eptype = ep->desc.bmAttributes & 0x03; + result = rpipe_get_idle(&rpipe, wa, 1 << eptype, gfp); + if (result < 0) + goto error; + result = rpipe_aim(rpipe, wa, ep, urb, gfp); + if (result < 0) { + rpipe_put(rpipe); + goto error; + } + ep->hcpriv = rpipe; + rpipe->ep = ep; + __rpipe_get(rpipe); /* for caching into ep->hcpriv */ + d_printf(2, dev, "ep 0x%02x: using rpipe %u\n", + ep->desc.bEndpointAddress, + le16_to_cpu(rpipe->descr.wRPipeIndex)); + } + d_dump(4, dev, &rpipe->descr, sizeof(rpipe->descr)); +error: + mutex_unlock(&wa->rpipe_mutex); + d_fnend(3, dev, "(wa %p ep %p urb %p gfp 0x%08x)\n", wa, ep, urb, gfp); + return result; +} + +/* + * Allocate the bitmap for each rpipe. + */ +int wa_rpipes_create(struct wahc *wa) +{ + wa->rpipes = wa->wa_descr->wNumRPipes; + wa->rpipe_bm = kzalloc(BITS_TO_LONGS(wa->rpipes)*sizeof(unsigned long), + GFP_KERNEL); + if (wa->rpipe_bm == NULL) + return -ENOMEM; + return 0; +} + +void wa_rpipes_destroy(struct wahc *wa) +{ + struct device *dev = &wa->usb_iface->dev; + d_fnstart(3, dev, "(wa %p)\n", wa); + if (!bitmap_empty(wa->rpipe_bm, wa->rpipes)) { + char buf[256]; + WARN_ON(1); + bitmap_scnprintf(buf, sizeof(buf), wa->rpipe_bm, wa->rpipes); + dev_err(dev, "BUG: pipes not released on exit: %s\n", buf); + } + kfree(wa->rpipe_bm); + d_fnend(3, dev, "(wa %p)\n", wa); +} + +/* + * Release resources allocated for an endpoint + * + * If there is an associated rpipe to this endpoint, Abort any pending + * transfers and put it. If the rpipe ends up being destroyed, + * __rpipe_destroy() will cleanup ep->hcpriv. + * + * This is called before calling hcd->stop(), so you don't need to do + * anything else in there. + */ +void rpipe_ep_disable(struct wahc *wa, struct usb_host_endpoint *ep) +{ + struct device *dev = &wa->usb_iface->dev; + struct wa_rpipe *rpipe; + d_fnstart(2, dev, "(wa %p ep %p)\n", wa, ep); + mutex_lock(&wa->rpipe_mutex); + rpipe = ep->hcpriv; + if (rpipe != NULL) { + unsigned rc = atomic_read(&rpipe->refcnt.refcount); + int result; + u16 index = le16_to_cpu(rpipe->descr.wRPipeIndex); + + if (rc != 1) + d_printf(1, dev, "(wa %p ep %p) rpipe %p refcnt %u\n", + wa, ep, rpipe, rc); + + d_printf(1, dev, "rpipe %u: abort\n", index); + result = usb_control_msg( + wa->usb_dev, usb_rcvctrlpipe(wa->usb_dev, 0), + USB_REQ_RPIPE_ABORT, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE, + 0, index, NULL, 0, 1000 /* FIXME: arbitrary */); + if (result < 0 && result != -ENODEV /* dev is gone */) + d_printf(1, dev, "(wa %p rpipe %u): abort failed: %d\n", + wa, index, result); + rpipe_put(rpipe); + } + mutex_unlock(&wa->rpipe_mutex); + d_fnend(2, dev, "(wa %p ep %p)\n", wa, ep); + return; +} +EXPORT_SYMBOL_GPL(rpipe_ep_disable); diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c new file mode 100644 index 000000000000..c038635d1c64 --- /dev/null +++ b/drivers/usb/wusbcore/wa-xfer.c @@ -0,0 +1,1709 @@ +/* + * WUSB Wire Adapter + * Data transfer and URB enqueing + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * How transfers work: get a buffer, break it up in segments (segment + * size is a multiple of the maxpacket size). For each segment issue a + * segment request (struct wa_xfer_*), then send the data buffer if + * out or nothing if in (all over the DTO endpoint). + * + * For each submitted segment request, a notification will come over + * the NEP endpoint and a transfer result (struct xfer_result) will + * arrive in the DTI URB. Read it, get the xfer ID, see if there is + * data coming (inbound transfer), schedule a read and handle it. + * + * Sounds simple, it is a pain to implement. + * + * + * ENTRY POINTS + * + * FIXME + * + * LIFE CYCLE / STATE DIAGRAM + * + * FIXME + * + * THIS CODE IS DISGUSTING + * + * Warned you are; it's my second try and still not happy with it. + * + * NOTES: + * + * - No iso + * + * - Supports DMA xfers, control, bulk and maybe interrupt + * + * - Does not recycle unused rpipes + * + * An rpipe is assigned to an endpoint the first time it is used, + * and then it's there, assigned, until the endpoint is disabled + * (destroyed [{h,d}wahc_op_ep_disable()]. The assignment of the + * rpipe to the endpoint is done under the wa->rpipe_sem semaphore + * (should be a mutex). + * + * Two methods it could be done: + * + * (a) set up a timer everytime an rpipe's use count drops to 1 + * (which means unused) or when a transfer ends. Reset the + * timer when a xfer is queued. If the timer expires, release + * the rpipe [see rpipe_ep_disable()]. + * + * (b) when looking for free rpipes to attach [rpipe_get_by_ep()], + * when none are found go over the list, check their endpoint + * and their activity record (if no last-xfer-done-ts in the + * last x seconds) take it + * + * However, due to the fact that we have a set of limited + * resources (max-segments-at-the-same-time per xfer, + * xfers-per-ripe, blocks-per-rpipe, rpipes-per-host), at the end + * we are going to have to rebuild all this based on an scheduler, + * to where we have a list of transactions to do and based on the + * availability of the different requried components (blocks, + * rpipes, segment slots, etc), we go scheduling them. Painful. + */ +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/hash.h> +#include "wa-hc.h" +#include "wusbhc.h" + +#undef D_LOCAL +#define D_LOCAL 0 /* 0 disabled, > 0 different levels... */ +#include <linux/uwb/debug.h> + +enum { + WA_SEGS_MAX = 255, +}; + +enum wa_seg_status { + WA_SEG_NOTREADY, + WA_SEG_READY, + WA_SEG_DELAYED, + WA_SEG_SUBMITTED, + WA_SEG_PENDING, + WA_SEG_DTI_PENDING, + WA_SEG_DONE, + WA_SEG_ERROR, + WA_SEG_ABORTED, +}; + +static void wa_xfer_delayed_run(struct wa_rpipe *); + +/* + * Life cycle governed by 'struct urb' (the refcount of the struct is + * that of the 'struct urb' and usb_free_urb() would free the whole + * struct). + */ +struct wa_seg { + struct urb urb; + struct urb *dto_urb; /* for data output? */ + struct list_head list_node; /* for rpipe->req_list */ + struct wa_xfer *xfer; /* out xfer */ + u8 index; /* which segment we are */ + enum wa_seg_status status; + ssize_t result; /* bytes xfered or error */ + struct wa_xfer_hdr xfer_hdr; + u8 xfer_extra[]; /* xtra space for xfer_hdr_ctl */ +}; + +static void wa_seg_init(struct wa_seg *seg) +{ + /* usb_init_urb() repeats a lot of work, so we do it here */ + kref_init(&seg->urb.kref); +} + +/* + * Protected by xfer->lock + * + */ +struct wa_xfer { + struct kref refcnt; + struct list_head list_node; + spinlock_t lock; + u32 id; + + struct wahc *wa; /* Wire adapter we are plugged to */ + struct usb_host_endpoint *ep; + struct urb *urb; /* URB we are transfering for */ + struct wa_seg **seg; /* transfer segments */ + u8 segs, segs_submitted, segs_done; + unsigned is_inbound:1; + unsigned is_dma:1; + size_t seg_size; + int result; + + gfp_t gfp; /* allocation mask */ + + struct wusb_dev *wusb_dev; /* for activity timestamps */ +}; + +static inline void wa_xfer_init(struct wa_xfer *xfer) +{ + kref_init(&xfer->refcnt); + INIT_LIST_HEAD(&xfer->list_node); + spin_lock_init(&xfer->lock); +} + +/* + * Destory a transfer structure + * + * Note that the xfer->seg[index] thingies follow the URB life cycle, + * so we need to put them, not free them. + */ +static void wa_xfer_destroy(struct kref *_xfer) +{ + struct wa_xfer *xfer = container_of(_xfer, struct wa_xfer, refcnt); + if (xfer->seg) { + unsigned cnt; + for (cnt = 0; cnt < xfer->segs; cnt++) { + if (xfer->is_inbound) + usb_put_urb(xfer->seg[cnt]->dto_urb); + usb_put_urb(&xfer->seg[cnt]->urb); + } + } + kfree(xfer); + d_printf(2, NULL, "xfer %p destroyed\n", xfer); +} + +static void wa_xfer_get(struct wa_xfer *xfer) +{ + kref_get(&xfer->refcnt); +} + +static void wa_xfer_put(struct wa_xfer *xfer) +{ + d_fnstart(3, NULL, "(xfer %p) -- ref count bef put %d\n", + xfer, atomic_read(&xfer->refcnt.refcount)); + kref_put(&xfer->refcnt, wa_xfer_destroy); + d_fnend(3, NULL, "(xfer %p) = void\n", xfer); +} + +/* + * xfer is referenced + * + * xfer->lock has to be unlocked + * + * We take xfer->lock for setting the result; this is a barrier + * against drivers/usb/core/hcd.c:unlink1() being called after we call + * usb_hcd_giveback_urb() and wa_urb_dequeue() trying to get a + * reference to the transfer. + */ +static void wa_xfer_giveback(struct wa_xfer *xfer) +{ + unsigned long flags; + d_fnstart(3, NULL, "(xfer %p)\n", xfer); + spin_lock_irqsave(&xfer->wa->xfer_list_lock, flags); + list_del_init(&xfer->list_node); + spin_unlock_irqrestore(&xfer->wa->xfer_list_lock, flags); + /* FIXME: segmentation broken -- kills DWA */ + wusbhc_giveback_urb(xfer->wa->wusb, xfer->urb, xfer->result); + wa_put(xfer->wa); + wa_xfer_put(xfer); + d_fnend(3, NULL, "(xfer %p) = void\n", xfer); +} + +/* + * xfer is referenced + * + * xfer->lock has to be unlocked + */ +static void wa_xfer_completion(struct wa_xfer *xfer) +{ + d_fnstart(3, NULL, "(xfer %p)\n", xfer); + if (xfer->wusb_dev) + wusb_dev_put(xfer->wusb_dev); + rpipe_put(xfer->ep->hcpriv); + wa_xfer_giveback(xfer); + d_fnend(3, NULL, "(xfer %p) = void\n", xfer); + return; +} + +/* + * If transfer is done, wrap it up and return true + * + * xfer->lock has to be locked + */ +static unsigned __wa_xfer_is_done(struct wa_xfer *xfer) +{ + unsigned result, cnt; + struct wa_seg *seg; + struct urb *urb = xfer->urb; + unsigned found_short = 0; + + d_fnstart(3, NULL, "(xfer %p)\n", xfer); + result = xfer->segs_done == xfer->segs_submitted; + if (result == 0) + goto out; + urb->actual_length = 0; + for (cnt = 0; cnt < xfer->segs; cnt++) { + seg = xfer->seg[cnt]; + switch (seg->status) { + case WA_SEG_DONE: + if (found_short && seg->result > 0) { + if (printk_ratelimit()) + printk(KERN_ERR "xfer %p#%u: bad short " + "segments (%zu)\n", xfer, cnt, + seg->result); + urb->status = -EINVAL; + goto out; + } + urb->actual_length += seg->result; + if (seg->result < xfer->seg_size + && cnt != xfer->segs-1) + found_short = 1; + d_printf(2, NULL, "xfer %p#%u: DONE short %d " + "result %zu urb->actual_length %d\n", + xfer, seg->index, found_short, seg->result, + urb->actual_length); + break; + case WA_SEG_ERROR: + xfer->result = seg->result; + d_printf(2, NULL, "xfer %p#%u: ERROR result %zu\n", + xfer, seg->index, seg->result); + goto out; + case WA_SEG_ABORTED: + WARN_ON(urb->status != -ECONNRESET + && urb->status != -ENOENT); + d_printf(2, NULL, "xfer %p#%u ABORTED: result %d\n", + xfer, seg->index, urb->status); + xfer->result = urb->status; + goto out; + default: + /* if (printk_ratelimit()) */ + printk(KERN_ERR "xfer %p#%u: " + "is_done bad state %d\n", + xfer, cnt, seg->status); + xfer->result = -EINVAL; + WARN_ON(1); + goto out; + } + } + xfer->result = 0; +out: + d_fnend(3, NULL, "(xfer %p) = void\n", xfer); + return result; +} + +/* + * Initialize a transfer's ID + * + * We need to use a sequential number; if we use the pointer or the + * hash of the pointer, it can repeat over sequential transfers and + * then it will confuse the HWA....wonder why in hell they put a 32 + * bit handle in there then. + */ +static void wa_xfer_id_init(struct wa_xfer *xfer) +{ + xfer->id = atomic_add_return(1, &xfer->wa->xfer_id_count); +} + +/* + * Return the xfer's ID associated with xfer + * + * Need to generate a + */ +static u32 wa_xfer_id(struct wa_xfer *xfer) +{ + return xfer->id; +} + +/* + * Search for a transfer list ID on the HCD's URB list + * + * For 32 bit architectures, we use the pointer itself; for 64 bits, a + * 32-bit hash of the pointer. + * + * @returns NULL if not found. + */ +static struct wa_xfer *wa_xfer_get_by_id(struct wahc *wa, u32 id) +{ + unsigned long flags; + struct wa_xfer *xfer_itr; + spin_lock_irqsave(&wa->xfer_list_lock, flags); + list_for_each_entry(xfer_itr, &wa->xfer_list, list_node) { + if (id == xfer_itr->id) { + wa_xfer_get(xfer_itr); + goto out; + } + } + xfer_itr = NULL; +out: + spin_unlock_irqrestore(&wa->xfer_list_lock, flags); + return xfer_itr; +} + +struct wa_xfer_abort_buffer { + struct urb urb; + struct wa_xfer_abort cmd; +}; + +static void __wa_xfer_abort_cb(struct urb *urb) +{ + struct wa_xfer_abort_buffer *b = urb->context; + usb_put_urb(&b->urb); +} + +/* + * Aborts an ongoing transaction + * + * Assumes the transfer is referenced and locked and in a submitted + * state (mainly that there is an endpoint/rpipe assigned). + * + * The callback (see above) does nothing but freeing up the data by + * putting the URB. Because the URB is allocated at the head of the + * struct, the whole space we allocated is kfreed. + * + * We'll get an 'aborted transaction' xfer result on DTI, that'll + * politely ignore because at this point the transaction has been + * marked as aborted already. + */ +static void __wa_xfer_abort(struct wa_xfer *xfer) +{ + int result; + struct device *dev = &xfer->wa->usb_iface->dev; + struct wa_xfer_abort_buffer *b; + struct wa_rpipe *rpipe = xfer->ep->hcpriv; + + b = kmalloc(sizeof(*b), GFP_ATOMIC); + if (b == NULL) + goto error_kmalloc; + b->cmd.bLength = sizeof(b->cmd); + b->cmd.bRequestType = WA_XFER_ABORT; + b->cmd.wRPipe = rpipe->descr.wRPipeIndex; + b->cmd.dwTransferID = wa_xfer_id(xfer); + + usb_init_urb(&b->urb); + usb_fill_bulk_urb(&b->urb, xfer->wa->usb_dev, + usb_sndbulkpipe(xfer->wa->usb_dev, + xfer->wa->dto_epd->bEndpointAddress), + &b->cmd, sizeof(b->cmd), __wa_xfer_abort_cb, b); + result = usb_submit_urb(&b->urb, GFP_ATOMIC); + if (result < 0) + goto error_submit; + return; /* callback frees! */ + + +error_submit: + if (printk_ratelimit()) + dev_err(dev, "xfer %p: Can't submit abort request: %d\n", + xfer, result); + kfree(b); +error_kmalloc: + return; + +} + +/* + * + * @returns < 0 on error, transfer segment request size if ok + */ +static ssize_t __wa_xfer_setup_sizes(struct wa_xfer *xfer, + enum wa_xfer_type *pxfer_type) +{ + ssize_t result; + struct device *dev = &xfer->wa->usb_iface->dev; + size_t maxpktsize; + struct urb *urb = xfer->urb; + struct wa_rpipe *rpipe = xfer->ep->hcpriv; + + d_fnstart(3, dev, "(xfer %p [rpipe %p] urb %p)\n", + xfer, rpipe, urb); + switch (rpipe->descr.bmAttribute & 0x3) { + case USB_ENDPOINT_XFER_CONTROL: + *pxfer_type = WA_XFER_TYPE_CTL; + result = sizeof(struct wa_xfer_ctl); + break; + case USB_ENDPOINT_XFER_INT: + case USB_ENDPOINT_XFER_BULK: + *pxfer_type = WA_XFER_TYPE_BI; + result = sizeof(struct wa_xfer_bi); + break; + case USB_ENDPOINT_XFER_ISOC: + dev_err(dev, "FIXME: ISOC not implemented\n"); + result = -ENOSYS; + goto error; + default: + /* never happens */ + BUG(); + result = -EINVAL; /* shut gcc up */ + }; + xfer->is_inbound = urb->pipe & USB_DIR_IN ? 1 : 0; + xfer->is_dma = urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP ? 1 : 0; + xfer->seg_size = le16_to_cpu(rpipe->descr.wBlocks) + * 1 << (xfer->wa->wa_descr->bRPipeBlockSize - 1); + /* Compute the segment size and make sure it is a multiple of + * the maxpktsize (WUSB1.0[8.3.3.1])...not really too much of + * a check (FIXME) */ + maxpktsize = le16_to_cpu(rpipe->descr.wMaxPacketSize); + if (xfer->seg_size < maxpktsize) { + dev_err(dev, "HW BUG? seg_size %zu smaller than maxpktsize " + "%zu\n", xfer->seg_size, maxpktsize); + result = -EINVAL; + goto error; + } + xfer->seg_size = (xfer->seg_size / maxpktsize) * maxpktsize; + xfer->segs = (urb->transfer_buffer_length + xfer->seg_size - 1) + / xfer->seg_size; + if (xfer->segs >= WA_SEGS_MAX) { + dev_err(dev, "BUG? ops, number of segments %d bigger than %d\n", + (int)(urb->transfer_buffer_length / xfer->seg_size), + WA_SEGS_MAX); + result = -EINVAL; + goto error; + } + if (xfer->segs == 0 && *pxfer_type == WA_XFER_TYPE_CTL) + xfer->segs = 1; +error: + d_fnend(3, dev, "(xfer %p [rpipe %p] urb %p) = %d\n", + xfer, rpipe, urb, (int)result); + return result; +} + +/** Fill in the common request header and xfer-type specific data. */ +static void __wa_xfer_setup_hdr0(struct wa_xfer *xfer, + struct wa_xfer_hdr *xfer_hdr0, + enum wa_xfer_type xfer_type, + size_t xfer_hdr_size) +{ + struct wa_rpipe *rpipe = xfer->ep->hcpriv; + + xfer_hdr0 = &xfer->seg[0]->xfer_hdr; + xfer_hdr0->bLength = xfer_hdr_size; + xfer_hdr0->bRequestType = xfer_type; + xfer_hdr0->wRPipe = rpipe->descr.wRPipeIndex; + xfer_hdr0->dwTransferID = wa_xfer_id(xfer); + xfer_hdr0->bTransferSegment = 0; + switch (xfer_type) { + case WA_XFER_TYPE_CTL: { + struct wa_xfer_ctl *xfer_ctl = + container_of(xfer_hdr0, struct wa_xfer_ctl, hdr); + xfer_ctl->bmAttribute = xfer->is_inbound ? 1 : 0; + BUG_ON(xfer->urb->transfer_flags & URB_NO_SETUP_DMA_MAP + && xfer->urb->setup_packet == NULL); + memcpy(&xfer_ctl->baSetupData, xfer->urb->setup_packet, + sizeof(xfer_ctl->baSetupData)); + break; + } + case WA_XFER_TYPE_BI: + break; + case WA_XFER_TYPE_ISO: + printk(KERN_ERR "FIXME: ISOC not implemented\n"); + default: + BUG(); + }; +} + +/* + * Callback for the OUT data phase of the segment request + * + * Check wa_seg_cb(); most comments also apply here because this + * function does almost the same thing and they work closely + * together. + * + * If the seg request has failed but this DTO phase has suceeded, + * wa_seg_cb() has already failed the segment and moved the + * status to WA_SEG_ERROR, so this will go through 'case 0' and + * effectively do nothing. + */ +static void wa_seg_dto_cb(struct urb *urb) +{ + struct wa_seg *seg = urb->context; + struct wa_xfer *xfer = seg->xfer; + struct wahc *wa; + struct device *dev; + struct wa_rpipe *rpipe; + unsigned long flags; + unsigned rpipe_ready = 0; + u8 done = 0; + + d_fnstart(3, NULL, "(urb %p [%d])\n", urb, urb->status); + switch (urb->status) { + case 0: + spin_lock_irqsave(&xfer->lock, flags); + wa = xfer->wa; + dev = &wa->usb_iface->dev; + d_printf(2, dev, "xfer %p#%u: data out done (%d bytes)\n", + xfer, seg->index, urb->actual_length); + if (seg->status < WA_SEG_PENDING) + seg->status = WA_SEG_PENDING; + seg->result = urb->actual_length; + spin_unlock_irqrestore(&xfer->lock, flags); + break; + case -ECONNRESET: /* URB unlinked; no need to do anything */ + case -ENOENT: /* as it was done by the who unlinked us */ + break; + default: /* Other errors ... */ + spin_lock_irqsave(&xfer->lock, flags); + wa = xfer->wa; + dev = &wa->usb_iface->dev; + rpipe = xfer->ep->hcpriv; + if (printk_ratelimit()) + dev_err(dev, "xfer %p#%u: data out error %d\n", + xfer, seg->index, urb->status); + if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, + EDC_ERROR_TIMEFRAME)){ + dev_err(dev, "DTO: URB max acceptable errors " + "exceeded, resetting device\n"); + wa_reset_all(wa); + } + if (seg->status != WA_SEG_ERROR) { + seg->status = WA_SEG_ERROR; + seg->result = urb->status; + xfer->segs_done++; + __wa_xfer_abort(xfer); + rpipe_ready = rpipe_avail_inc(rpipe); + done = __wa_xfer_is_done(xfer); + } + spin_unlock_irqrestore(&xfer->lock, flags); + if (done) + wa_xfer_completion(xfer); + if (rpipe_ready) + wa_xfer_delayed_run(rpipe); + } + d_fnend(3, NULL, "(urb %p [%d]) = void\n", urb, urb->status); +} + +/* + * Callback for the segment request + * + * If succesful transition state (unless already transitioned or + * outbound transfer); otherwise, take a note of the error, mark this + * segment done and try completion. + * + * Note we don't access until we are sure that the transfer hasn't + * been cancelled (ECONNRESET, ENOENT), which could mean that + * seg->xfer could be already gone. + * + * We have to check before setting the status to WA_SEG_PENDING + * because sometimes the xfer result callback arrives before this + * callback (geeeeeeze), so it might happen that we are already in + * another state. As well, we don't set it if the transfer is inbound, + * as in that case, wa_seg_dto_cb will do it when the OUT data phase + * finishes. + */ +static void wa_seg_cb(struct urb *urb) +{ + struct wa_seg *seg = urb->context; + struct wa_xfer *xfer = seg->xfer; + struct wahc *wa; + struct device *dev; + struct wa_rpipe *rpipe; + unsigned long flags; + unsigned rpipe_ready; + u8 done = 0; + + d_fnstart(3, NULL, "(urb %p [%d])\n", urb, urb->status); + switch (urb->status) { + case 0: + spin_lock_irqsave(&xfer->lock, flags); + wa = xfer->wa; + dev = &wa->usb_iface->dev; + d_printf(2, dev, "xfer %p#%u: request done\n", + xfer, seg->index); + if (xfer->is_inbound && seg->status < WA_SEG_PENDING) + seg->status = WA_SEG_PENDING; + spin_unlock_irqrestore(&xfer->lock, flags); + break; + case -ECONNRESET: /* URB unlinked; no need to do anything */ + case -ENOENT: /* as it was done by the who unlinked us */ + break; + default: /* Other errors ... */ + spin_lock_irqsave(&xfer->lock, flags); + wa = xfer->wa; + dev = &wa->usb_iface->dev; + rpipe = xfer->ep->hcpriv; + if (printk_ratelimit()) + dev_err(dev, "xfer %p#%u: request error %d\n", + xfer, seg->index, urb->status); + if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, + EDC_ERROR_TIMEFRAME)){ + dev_err(dev, "DTO: URB max acceptable errors " + "exceeded, resetting device\n"); + wa_reset_all(wa); + } + usb_unlink_urb(seg->dto_urb); + seg->status = WA_SEG_ERROR; + seg->result = urb->status; + xfer->segs_done++; + __wa_xfer_abort(xfer); + rpipe_ready = rpipe_avail_inc(rpipe); + done = __wa_xfer_is_done(xfer); + spin_unlock_irqrestore(&xfer->lock, flags); + if (done) + wa_xfer_completion(xfer); + if (rpipe_ready) + wa_xfer_delayed_run(rpipe); + } + d_fnend(3, NULL, "(urb %p [%d]) = void\n", urb, urb->status); +} + +/* + * Allocate the segs array and initialize each of them + * + * The segments are freed by wa_xfer_destroy() when the xfer use count + * drops to zero; however, because each segment is given the same life + * cycle as the USB URB it contains, it is actually freed by + * usb_put_urb() on the contained USB URB (twisted, eh?). + */ +static int __wa_xfer_setup_segs(struct wa_xfer *xfer, size_t xfer_hdr_size) +{ + int result, cnt; + size_t alloc_size = sizeof(*xfer->seg[0]) + - sizeof(xfer->seg[0]->xfer_hdr) + xfer_hdr_size; + struct usb_device *usb_dev = xfer->wa->usb_dev; + const struct usb_endpoint_descriptor *dto_epd = xfer->wa->dto_epd; + struct wa_seg *seg; + size_t buf_itr, buf_size, buf_itr_size; + + result = -ENOMEM; + xfer->seg = kcalloc(xfer->segs, sizeof(xfer->seg[0]), GFP_ATOMIC); + if (xfer->seg == NULL) + goto error_segs_kzalloc; + buf_itr = 0; + buf_size = xfer->urb->transfer_buffer_length; + for (cnt = 0; cnt < xfer->segs; cnt++) { + seg = xfer->seg[cnt] = kzalloc(alloc_size, GFP_ATOMIC); + if (seg == NULL) + goto error_seg_kzalloc; + wa_seg_init(seg); + seg->xfer = xfer; + seg->index = cnt; + usb_fill_bulk_urb(&seg->urb, usb_dev, + usb_sndbulkpipe(usb_dev, + dto_epd->bEndpointAddress), + &seg->xfer_hdr, xfer_hdr_size, + wa_seg_cb, seg); + buf_itr_size = buf_size > xfer->seg_size ? + xfer->seg_size : buf_size; + if (xfer->is_inbound == 0 && buf_size > 0) { + seg->dto_urb = usb_alloc_urb(0, GFP_ATOMIC); + if (seg->dto_urb == NULL) + goto error_dto_alloc; + usb_fill_bulk_urb( + seg->dto_urb, usb_dev, + usb_sndbulkpipe(usb_dev, + dto_epd->bEndpointAddress), + NULL, 0, wa_seg_dto_cb, seg); + if (xfer->is_dma) { + seg->dto_urb->transfer_dma = + xfer->urb->transfer_dma + buf_itr; + seg->dto_urb->transfer_flags |= + URB_NO_TRANSFER_DMA_MAP; + } else + seg->dto_urb->transfer_buffer = + xfer->urb->transfer_buffer + buf_itr; + seg->dto_urb->transfer_buffer_length = buf_itr_size; + } + seg->status = WA_SEG_READY; + buf_itr += buf_itr_size; + buf_size -= buf_itr_size; + } + return 0; + +error_dto_alloc: + kfree(xfer->seg[cnt]); + cnt--; +error_seg_kzalloc: + /* use the fact that cnt is left at were it failed */ + for (; cnt > 0; cnt--) { + if (xfer->is_inbound == 0) + kfree(xfer->seg[cnt]->dto_urb); + kfree(xfer->seg[cnt]); + } +error_segs_kzalloc: + return result; +} + +/* + * Allocates all the stuff needed to submit a transfer + * + * Breaks the whole data buffer in a list of segments, each one has a + * structure allocated to it and linked in xfer->seg[index] + * + * FIXME: merge setup_segs() and the last part of this function, no + * need to do two for loops when we could run everything in a + * single one + */ +static int __wa_xfer_setup(struct wa_xfer *xfer, struct urb *urb) +{ + int result; + struct device *dev = &xfer->wa->usb_iface->dev; + enum wa_xfer_type xfer_type = 0; /* shut up GCC */ + size_t xfer_hdr_size, cnt, transfer_size; + struct wa_xfer_hdr *xfer_hdr0, *xfer_hdr; + + d_fnstart(3, dev, "(xfer %p [rpipe %p] urb %p)\n", + xfer, xfer->ep->hcpriv, urb); + + result = __wa_xfer_setup_sizes(xfer, &xfer_type); + if (result < 0) + goto error_setup_sizes; + xfer_hdr_size = result; + result = __wa_xfer_setup_segs(xfer, xfer_hdr_size); + if (result < 0) { + dev_err(dev, "xfer %p: Failed to allocate %d segments: %d\n", + xfer, xfer->segs, result); + goto error_setup_segs; + } + /* Fill the first header */ + xfer_hdr0 = &xfer->seg[0]->xfer_hdr; + wa_xfer_id_init(xfer); + __wa_xfer_setup_hdr0(xfer, xfer_hdr0, xfer_type, xfer_hdr_size); + + /* Fill remainig headers */ + xfer_hdr = xfer_hdr0; + transfer_size = urb->transfer_buffer_length; + xfer_hdr0->dwTransferLength = transfer_size > xfer->seg_size ? + xfer->seg_size : transfer_size; + transfer_size -= xfer->seg_size; + for (cnt = 1; cnt < xfer->segs; cnt++) { + xfer_hdr = &xfer->seg[cnt]->xfer_hdr; + memcpy(xfer_hdr, xfer_hdr0, xfer_hdr_size); + xfer_hdr->bTransferSegment = cnt; + xfer_hdr->dwTransferLength = transfer_size > xfer->seg_size ? + cpu_to_le32(xfer->seg_size) + : cpu_to_le32(transfer_size); + xfer->seg[cnt]->status = WA_SEG_READY; + transfer_size -= xfer->seg_size; + } + xfer_hdr->bTransferSegment |= 0x80; /* this is the last segment */ + result = 0; +error_setup_segs: +error_setup_sizes: + d_fnend(3, dev, "(xfer %p [rpipe %p] urb %p) = %d\n", + xfer, xfer->ep->hcpriv, urb, result); + return result; +} + +/* + * + * + * rpipe->seg_lock is held! + */ +static int __wa_seg_submit(struct wa_rpipe *rpipe, struct wa_xfer *xfer, + struct wa_seg *seg) +{ + int result; + result = usb_submit_urb(&seg->urb, GFP_ATOMIC); + if (result < 0) { + printk(KERN_ERR "xfer %p#%u: REQ submit failed: %d\n", + xfer, seg->index, result); + goto error_seg_submit; + } + if (seg->dto_urb) { + result = usb_submit_urb(seg->dto_urb, GFP_ATOMIC); + if (result < 0) { + printk(KERN_ERR "xfer %p#%u: DTO submit failed: %d\n", + xfer, seg->index, result); + goto error_dto_submit; + } + } + seg->status = WA_SEG_SUBMITTED; + rpipe_avail_dec(rpipe); + return 0; + +error_dto_submit: + usb_unlink_urb(&seg->urb); +error_seg_submit: + seg->status = WA_SEG_ERROR; + seg->result = result; + return result; +} + +/* + * Execute more queued request segments until the maximum concurrent allowed + * + * The ugly unlock/lock sequence on the error path is needed as the + * xfer->lock normally nests the seg_lock and not viceversa. + * + */ +static void wa_xfer_delayed_run(struct wa_rpipe *rpipe) +{ + int result; + struct device *dev = &rpipe->wa->usb_iface->dev; + struct wa_seg *seg; + struct wa_xfer *xfer; + unsigned long flags; + + d_fnstart(1, dev, "(rpipe #%d) %d segments available\n", + le16_to_cpu(rpipe->descr.wRPipeIndex), + atomic_read(&rpipe->segs_available)); + spin_lock_irqsave(&rpipe->seg_lock, flags); + while (atomic_read(&rpipe->segs_available) > 0 + && !list_empty(&rpipe->seg_list)) { + seg = list_entry(rpipe->seg_list.next, struct wa_seg, + list_node); + list_del(&seg->list_node); + xfer = seg->xfer; + result = __wa_seg_submit(rpipe, xfer, seg); + d_printf(1, dev, "xfer %p#%u submitted from delayed " + "[%d segments available] %d\n", + xfer, seg->index, + atomic_read(&rpipe->segs_available), result); + if (unlikely(result < 0)) { + spin_unlock_irqrestore(&rpipe->seg_lock, flags); + spin_lock_irqsave(&xfer->lock, flags); + __wa_xfer_abort(xfer); + xfer->segs_done++; + spin_unlock_irqrestore(&xfer->lock, flags); + spin_lock_irqsave(&rpipe->seg_lock, flags); + } + } + spin_unlock_irqrestore(&rpipe->seg_lock, flags); + d_fnend(1, dev, "(rpipe #%d) = void, %d segments available\n", + le16_to_cpu(rpipe->descr.wRPipeIndex), + atomic_read(&rpipe->segs_available)); + +} + +/* + * + * xfer->lock is taken + * + * On failure submitting we just stop submitting and return error; + * wa_urb_enqueue_b() will execute the completion path + */ +static int __wa_xfer_submit(struct wa_xfer *xfer) +{ + int result; + struct wahc *wa = xfer->wa; + struct device *dev = &wa->usb_iface->dev; + unsigned cnt; + struct wa_seg *seg; + unsigned long flags; + struct wa_rpipe *rpipe = xfer->ep->hcpriv; + size_t maxrequests = le16_to_cpu(rpipe->descr.wRequests); + u8 available; + u8 empty; + + d_fnstart(3, dev, "(xfer %p [rpipe %p])\n", + xfer, xfer->ep->hcpriv); + + spin_lock_irqsave(&wa->xfer_list_lock, flags); + list_add_tail(&xfer->list_node, &wa->xfer_list); + spin_unlock_irqrestore(&wa->xfer_list_lock, flags); + + BUG_ON(atomic_read(&rpipe->segs_available) > maxrequests); + result = 0; + spin_lock_irqsave(&rpipe->seg_lock, flags); + for (cnt = 0; cnt < xfer->segs; cnt++) { + available = atomic_read(&rpipe->segs_available); + empty = list_empty(&rpipe->seg_list); + seg = xfer->seg[cnt]; + d_printf(2, dev, "xfer %p#%u: available %u empty %u (%s)\n", + xfer, cnt, available, empty, + available == 0 || !empty ? "delayed" : "submitted"); + if (available == 0 || !empty) { + d_printf(1, dev, "xfer %p#%u: delayed\n", xfer, cnt); + seg->status = WA_SEG_DELAYED; + list_add_tail(&seg->list_node, &rpipe->seg_list); + } else { + result = __wa_seg_submit(rpipe, xfer, seg); + if (result < 0) + goto error_seg_submit; + } + xfer->segs_submitted++; + } + spin_unlock_irqrestore(&rpipe->seg_lock, flags); + d_fnend(3, dev, "(xfer %p [rpipe %p]) = void\n", xfer, + xfer->ep->hcpriv); + return result; + +error_seg_submit: + __wa_xfer_abort(xfer); + spin_unlock_irqrestore(&rpipe->seg_lock, flags); + d_fnend(3, dev, "(xfer %p [rpipe %p]) = void\n", xfer, + xfer->ep->hcpriv); + return result; +} + +/* + * Second part of a URB/transfer enqueuement + * + * Assumes this comes from wa_urb_enqueue() [maybe through + * wa_urb_enqueue_run()]. At this point: + * + * xfer->wa filled and refcounted + * xfer->ep filled with rpipe refcounted if + * delayed == 0 + * xfer->urb filled and refcounted (this is the case when called + * from wa_urb_enqueue() as we come from usb_submit_urb() + * and when called by wa_urb_enqueue_run(), as we took an + * extra ref dropped by _run() after we return). + * xfer->gfp filled + * + * If we fail at __wa_xfer_submit(), then we just check if we are done + * and if so, we run the completion procedure. However, if we are not + * yet done, we do nothing and wait for the completion handlers from + * the submitted URBs or from the xfer-result path to kick in. If xfer + * result never kicks in, the xfer will timeout from the USB code and + * dequeue() will be called. + */ +static void wa_urb_enqueue_b(struct wa_xfer *xfer) +{ + int result; + unsigned long flags; + struct urb *urb = xfer->urb; + struct wahc *wa = xfer->wa; + struct wusbhc *wusbhc = wa->wusb; + struct device *dev = &wa->usb_iface->dev; + struct wusb_dev *wusb_dev; + unsigned done; + + d_fnstart(3, dev, "(wa %p urb %p)\n", wa, urb); + result = rpipe_get_by_ep(wa, xfer->ep, urb, xfer->gfp); + if (result < 0) + goto error_rpipe_get; + result = -ENODEV; + /* FIXME: segmentation broken -- kills DWA */ + mutex_lock(&wusbhc->mutex); /* get a WUSB dev */ + if (urb->dev == NULL) + goto error_dev_gone; + wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev); + if (wusb_dev == NULL) { + mutex_unlock(&wusbhc->mutex); + goto error_dev_gone; + } + mutex_unlock(&wusbhc->mutex); + + spin_lock_irqsave(&xfer->lock, flags); + xfer->wusb_dev = wusb_dev; + result = urb->status; + if (urb->status != -EINPROGRESS) + goto error_dequeued; + + result = __wa_xfer_setup(xfer, urb); + if (result < 0) + goto error_xfer_setup; + result = __wa_xfer_submit(xfer); + if (result < 0) + goto error_xfer_submit; + spin_unlock_irqrestore(&xfer->lock, flags); + d_fnend(3, dev, "(wa %p urb %p) = void\n", wa, urb); + return; + + /* this is basically wa_xfer_completion() broken up wa_xfer_giveback() + * does a wa_xfer_put() that will call wa_xfer_destroy() and clean + * upundo setup(). + */ +error_xfer_setup: +error_dequeued: + spin_unlock_irqrestore(&xfer->lock, flags); + /* FIXME: segmentation broken, kills DWA */ + if (wusb_dev) + wusb_dev_put(wusb_dev); +error_dev_gone: + rpipe_put(xfer->ep->hcpriv); +error_rpipe_get: + xfer->result = result; + wa_xfer_giveback(xfer); + d_fnend(3, dev, "(wa %p urb %p) = (void) %d\n", wa, urb, result); + return; + +error_xfer_submit: + done = __wa_xfer_is_done(xfer); + xfer->result = result; + spin_unlock_irqrestore(&xfer->lock, flags); + if (done) + wa_xfer_completion(xfer); + d_fnend(3, dev, "(wa %p urb %p) = (void) %d\n", wa, urb, result); + return; +} + +/* + * Execute the delayed transfers in the Wire Adapter @wa + * + * We need to be careful here, as dequeue() could be called in the + * middle. That's why we do the whole thing under the + * wa->xfer_list_lock. If dequeue() jumps in, it first locks urb->lock + * and then checks the list -- so as we would be acquiring in inverse + * order, we just drop the lock once we have the xfer and reacquire it + * later. + */ +void wa_urb_enqueue_run(struct work_struct *ws) +{ + struct wahc *wa = container_of(ws, struct wahc, xfer_work); + struct device *dev = &wa->usb_iface->dev; + struct wa_xfer *xfer, *next; + struct urb *urb; + + d_fnstart(3, dev, "(wa %p)\n", wa); + spin_lock_irq(&wa->xfer_list_lock); + list_for_each_entry_safe(xfer, next, &wa->xfer_delayed_list, + list_node) { + list_del_init(&xfer->list_node); + spin_unlock_irq(&wa->xfer_list_lock); + + urb = xfer->urb; + wa_urb_enqueue_b(xfer); + usb_put_urb(urb); /* taken when queuing */ + + spin_lock_irq(&wa->xfer_list_lock); + } + spin_unlock_irq(&wa->xfer_list_lock); + d_fnend(3, dev, "(wa %p) = void\n", wa); +} +EXPORT_SYMBOL_GPL(wa_urb_enqueue_run); + +/* + * Submit a transfer to the Wire Adapter in a delayed way + * + * The process of enqueuing involves possible sleeps() [see + * enqueue_b(), for the rpipe_get() and the mutex_lock()]. If we are + * in an atomic section, we defer the enqueue_b() call--else we call direct. + * + * @urb: We own a reference to it done by the HCI Linux USB stack that + * will be given up by calling usb_hcd_giveback_urb() or by + * returning error from this function -> ergo we don't have to + * refcount it. + */ +int wa_urb_enqueue(struct wahc *wa, struct usb_host_endpoint *ep, + struct urb *urb, gfp_t gfp) +{ + int result; + struct device *dev = &wa->usb_iface->dev; + struct wa_xfer *xfer; + unsigned long my_flags; + unsigned cant_sleep = irqs_disabled() | in_atomic(); + + d_fnstart(3, dev, "(wa %p ep %p urb %p [%d] gfp 0x%x)\n", + wa, ep, urb, urb->transfer_buffer_length, gfp); + + if (urb->transfer_buffer == NULL + && !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) + && urb->transfer_buffer_length != 0) { + dev_err(dev, "BUG? urb %p: NULL xfer buffer & NODMA\n", urb); + dump_stack(); + } + + result = -ENOMEM; + xfer = kzalloc(sizeof(*xfer), gfp); + if (xfer == NULL) + goto error_kmalloc; + + result = -ENOENT; + if (urb->status != -EINPROGRESS) /* cancelled */ + goto error_dequeued; /* before starting? */ + wa_xfer_init(xfer); + xfer->wa = wa_get(wa); + xfer->urb = urb; + xfer->gfp = gfp; + xfer->ep = ep; + urb->hcpriv = xfer; + d_printf(2, dev, "xfer %p urb %p pipe 0x%02x [%d bytes] %s %s %s\n", + xfer, urb, urb->pipe, urb->transfer_buffer_length, + urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP ? "dma" : "nodma", + urb->pipe & USB_DIR_IN ? "inbound" : "outbound", + cant_sleep ? "deferred" : "inline"); + if (cant_sleep) { + usb_get_urb(urb); + spin_lock_irqsave(&wa->xfer_list_lock, my_flags); + list_add_tail(&xfer->list_node, &wa->xfer_delayed_list); + spin_unlock_irqrestore(&wa->xfer_list_lock, my_flags); + queue_work(wusbd, &wa->xfer_work); + } else { + wa_urb_enqueue_b(xfer); + } + d_fnend(3, dev, "(wa %p ep %p urb %p [%d] gfp 0x%x) = 0\n", + wa, ep, urb, urb->transfer_buffer_length, gfp); + return 0; + +error_dequeued: + kfree(xfer); +error_kmalloc: + d_fnend(3, dev, "(wa %p ep %p urb %p [%d] gfp 0x%x) = %d\n", + wa, ep, urb, urb->transfer_buffer_length, gfp, result); + return result; +} +EXPORT_SYMBOL_GPL(wa_urb_enqueue); + +/* + * Dequeue a URB and make sure uwb_hcd_giveback_urb() [completion + * handler] is called. + * + * Until a transfer goes successfully through wa_urb_enqueue() it + * needs to be dequeued with completion calling; when stuck in delayed + * or before wa_xfer_setup() is called, we need to do completion. + * + * not setup If there is no hcpriv yet, that means that that enqueue + * still had no time to set the xfer up. Because + * urb->status should be other than -EINPROGRESS, + * enqueue() will catch that and bail out. + * + * If the transfer has gone through setup, we just need to clean it + * up. If it has gone through submit(), we have to abort it [with an + * asynch request] and then make sure we cancel each segment. + * + */ +int wa_urb_dequeue(struct wahc *wa, struct urb *urb) +{ + struct device *dev = &wa->usb_iface->dev; + unsigned long flags, flags2; + struct wa_xfer *xfer; + struct wa_seg *seg; + struct wa_rpipe *rpipe; + unsigned cnt; + unsigned rpipe_ready = 0; + + d_fnstart(3, dev, "(wa %p, urb %p)\n", wa, urb); + + d_printf(1, dev, "xfer %p urb %p: aborting\n", urb->hcpriv, urb); + xfer = urb->hcpriv; + if (xfer == NULL) { + /* NOthing setup yet enqueue will see urb->status != + * -EINPROGRESS (by hcd layer) and bail out with + * error, no need to do completion + */ + BUG_ON(urb->status == -EINPROGRESS); + goto out; + } + spin_lock_irqsave(&xfer->lock, flags); + rpipe = xfer->ep->hcpriv; + /* Check the delayed list -> if there, release and complete */ + spin_lock_irqsave(&wa->xfer_list_lock, flags2); + if (!list_empty(&xfer->list_node) && xfer->seg == NULL) + goto dequeue_delayed; + spin_unlock_irqrestore(&wa->xfer_list_lock, flags2); + if (xfer->seg == NULL) /* still hasn't reached */ + goto out_unlock; /* setup(), enqueue_b() completes */ + /* Ok, the xfer is in flight already, it's been setup and submitted.*/ + __wa_xfer_abort(xfer); + for (cnt = 0; cnt < xfer->segs; cnt++) { + seg = xfer->seg[cnt]; + switch (seg->status) { + case WA_SEG_NOTREADY: + case WA_SEG_READY: + printk(KERN_ERR "xfer %p#%u: dequeue bad state %u\n", + xfer, cnt, seg->status); + WARN_ON(1); + break; + case WA_SEG_DELAYED: + seg->status = WA_SEG_ABORTED; + spin_lock_irqsave(&rpipe->seg_lock, flags2); + list_del(&seg->list_node); + xfer->segs_done++; + rpipe_ready = rpipe_avail_inc(rpipe); + spin_unlock_irqrestore(&rpipe->seg_lock, flags2); + break; + case WA_SEG_SUBMITTED: + seg->status = WA_SEG_ABORTED; + usb_unlink_urb(&seg->urb); + if (xfer->is_inbound == 0) + usb_unlink_urb(seg->dto_urb); + xfer->segs_done++; + rpipe_ready = rpipe_avail_inc(rpipe); + break; + case WA_SEG_PENDING: + seg->status = WA_SEG_ABORTED; + xfer->segs_done++; + rpipe_ready = rpipe_avail_inc(rpipe); + break; + case WA_SEG_DTI_PENDING: + usb_unlink_urb(wa->dti_urb); + seg->status = WA_SEG_ABORTED; + xfer->segs_done++; + rpipe_ready = rpipe_avail_inc(rpipe); + break; + case WA_SEG_DONE: + case WA_SEG_ERROR: + case WA_SEG_ABORTED: + break; + } + } + xfer->result = urb->status; /* -ENOENT or -ECONNRESET */ + __wa_xfer_is_done(xfer); + spin_unlock_irqrestore(&xfer->lock, flags); + wa_xfer_completion(xfer); + if (rpipe_ready) + wa_xfer_delayed_run(rpipe); + d_fnend(3, dev, "(wa %p, urb %p) = 0\n", wa, urb); + return 0; + +out_unlock: + spin_unlock_irqrestore(&xfer->lock, flags); +out: + d_fnend(3, dev, "(wa %p, urb %p) = 0\n", wa, urb); + return 0; + +dequeue_delayed: + list_del_init(&xfer->list_node); + spin_unlock_irqrestore(&wa->xfer_list_lock, flags2); + xfer->result = urb->status; + spin_unlock_irqrestore(&xfer->lock, flags); + wa_xfer_giveback(xfer); + usb_put_urb(urb); /* we got a ref in enqueue() */ + d_fnend(3, dev, "(wa %p, urb %p) = 0\n", wa, urb); + return 0; +} +EXPORT_SYMBOL_GPL(wa_urb_dequeue); + +/* + * Translation from WA status codes (WUSB1.0 Table 8.15) to errno + * codes + * + * Positive errno values are internal inconsistencies and should be + * flagged louder. Negative are to be passed up to the user in the + * normal way. + * + * @status: USB WA status code -- high two bits are stripped. + */ +static int wa_xfer_status_to_errno(u8 status) +{ + int errno; + u8 real_status = status; + static int xlat[] = { + [WA_XFER_STATUS_SUCCESS] = 0, + [WA_XFER_STATUS_HALTED] = -EPIPE, + [WA_XFER_STATUS_DATA_BUFFER_ERROR] = -ENOBUFS, + [WA_XFER_STATUS_BABBLE] = -EOVERFLOW, + [WA_XFER_RESERVED] = EINVAL, + [WA_XFER_STATUS_NOT_FOUND] = 0, + [WA_XFER_STATUS_INSUFFICIENT_RESOURCE] = -ENOMEM, + [WA_XFER_STATUS_TRANSACTION_ERROR] = -EILSEQ, + [WA_XFER_STATUS_ABORTED] = -EINTR, + [WA_XFER_STATUS_RPIPE_NOT_READY] = EINVAL, + [WA_XFER_INVALID_FORMAT] = EINVAL, + [WA_XFER_UNEXPECTED_SEGMENT_NUMBER] = EINVAL, + [WA_XFER_STATUS_RPIPE_TYPE_MISMATCH] = EINVAL, + }; + status &= 0x3f; + + if (status == 0) + return 0; + if (status >= ARRAY_SIZE(xlat)) { + if (printk_ratelimit()) + printk(KERN_ERR "%s(): BUG? " + "Unknown WA transfer status 0x%02x\n", + __func__, real_status); + return -EINVAL; + } + errno = xlat[status]; + if (unlikely(errno > 0)) { + if (printk_ratelimit()) + printk(KERN_ERR "%s(): BUG? " + "Inconsistent WA status: 0x%02x\n", + __func__, real_status); + errno = -errno; + } + return errno; +} + +/* + * Process a xfer result completion message + * + * inbound transfers: need to schedule a DTI read + * + * FIXME: this functio needs to be broken up in parts + */ +static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer) +{ + int result; + struct device *dev = &wa->usb_iface->dev; + unsigned long flags; + u8 seg_idx; + struct wa_seg *seg; + struct wa_rpipe *rpipe; + struct wa_xfer_result *xfer_result = wa->xfer_result; + u8 done = 0; + u8 usb_status; + unsigned rpipe_ready = 0; + + d_fnstart(3, dev, "(wa %p xfer %p)\n", wa, xfer); + spin_lock_irqsave(&xfer->lock, flags); + seg_idx = xfer_result->bTransferSegment & 0x7f; + if (unlikely(seg_idx >= xfer->segs)) + goto error_bad_seg; + seg = xfer->seg[seg_idx]; + rpipe = xfer->ep->hcpriv; + usb_status = xfer_result->bTransferStatus; + d_printf(2, dev, "xfer %p#%u: bTransferStatus 0x%02x (seg %u)\n", + xfer, seg_idx, usb_status, seg->status); + if (seg->status == WA_SEG_ABORTED + || seg->status == WA_SEG_ERROR) /* already handled */ + goto segment_aborted; + if (seg->status == WA_SEG_SUBMITTED) /* ops, got here */ + seg->status = WA_SEG_PENDING; /* before wa_seg{_dto}_cb() */ + if (seg->status != WA_SEG_PENDING) { + if (printk_ratelimit()) + dev_err(dev, "xfer %p#%u: Bad segment state %u\n", + xfer, seg_idx, seg->status); + seg->status = WA_SEG_PENDING; /* workaround/"fix" it */ + } + if (usb_status & 0x80) { + seg->result = wa_xfer_status_to_errno(usb_status); + dev_err(dev, "DTI: xfer %p#%u failed (0x%02x)\n", + xfer, seg->index, usb_status); + goto error_complete; + } + /* FIXME: we ignore warnings, tally them for stats */ + if (usb_status & 0x40) /* Warning?... */ + usb_status = 0; /* ... pass */ + if (xfer->is_inbound) { /* IN data phase: read to buffer */ + seg->status = WA_SEG_DTI_PENDING; + BUG_ON(wa->buf_in_urb->status == -EINPROGRESS); + if (xfer->is_dma) { + wa->buf_in_urb->transfer_dma = + xfer->urb->transfer_dma + + seg_idx * xfer->seg_size; + wa->buf_in_urb->transfer_flags + |= URB_NO_TRANSFER_DMA_MAP; + } else { + wa->buf_in_urb->transfer_buffer = + xfer->urb->transfer_buffer + + seg_idx * xfer->seg_size; + wa->buf_in_urb->transfer_flags + &= ~URB_NO_TRANSFER_DMA_MAP; + } + wa->buf_in_urb->transfer_buffer_length = + le32_to_cpu(xfer_result->dwTransferLength); + wa->buf_in_urb->context = seg; + result = usb_submit_urb(wa->buf_in_urb, GFP_ATOMIC); + if (result < 0) + goto error_submit_buf_in; + } else { + /* OUT data phase, complete it -- */ + seg->status = WA_SEG_DONE; + seg->result = le32_to_cpu(xfer_result->dwTransferLength); + xfer->segs_done++; + rpipe_ready = rpipe_avail_inc(rpipe); + done = __wa_xfer_is_done(xfer); + } + spin_unlock_irqrestore(&xfer->lock, flags); + if (done) + wa_xfer_completion(xfer); + if (rpipe_ready) + wa_xfer_delayed_run(rpipe); + d_fnend(3, dev, "(wa %p xfer %p) = void\n", wa, xfer); + return; + + +error_submit_buf_in: + if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) { + dev_err(dev, "DTI: URB max acceptable errors " + "exceeded, resetting device\n"); + wa_reset_all(wa); + } + if (printk_ratelimit()) + dev_err(dev, "xfer %p#%u: can't submit DTI data phase: %d\n", + xfer, seg_idx, result); + seg->result = result; +error_complete: + seg->status = WA_SEG_ERROR; + xfer->segs_done++; + rpipe_ready = rpipe_avail_inc(rpipe); + __wa_xfer_abort(xfer); + done = __wa_xfer_is_done(xfer); + spin_unlock_irqrestore(&xfer->lock, flags); + if (done) + wa_xfer_completion(xfer); + if (rpipe_ready) + wa_xfer_delayed_run(rpipe); + d_fnend(3, dev, "(wa %p xfer %p) = void [segment/DTI-submit error]\n", + wa, xfer); + return; + + +error_bad_seg: + spin_unlock_irqrestore(&xfer->lock, flags); + wa_urb_dequeue(wa, xfer->urb); + if (printk_ratelimit()) + dev_err(dev, "xfer %p#%u: bad segment\n", xfer, seg_idx); + if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)) { + dev_err(dev, "DTI: URB max acceptable errors " + "exceeded, resetting device\n"); + wa_reset_all(wa); + } + d_fnend(3, dev, "(wa %p xfer %p) = void [bad seg]\n", wa, xfer); + return; + + +segment_aborted: + /* nothing to do, as the aborter did the completion */ + spin_unlock_irqrestore(&xfer->lock, flags); + d_fnend(3, dev, "(wa %p xfer %p) = void [segment aborted]\n", + wa, xfer); + return; + +} + +/* + * Callback for the IN data phase + * + * If succesful transition state; otherwise, take a note of the + * error, mark this segment done and try completion. + * + * Note we don't access until we are sure that the transfer hasn't + * been cancelled (ECONNRESET, ENOENT), which could mean that + * seg->xfer could be already gone. + */ +static void wa_buf_in_cb(struct urb *urb) +{ + struct wa_seg *seg = urb->context; + struct wa_xfer *xfer = seg->xfer; + struct wahc *wa; + struct device *dev; + struct wa_rpipe *rpipe; + unsigned rpipe_ready; + unsigned long flags; + u8 done = 0; + + d_fnstart(3, NULL, "(urb %p [%d])\n", urb, urb->status); + switch (urb->status) { + case 0: + spin_lock_irqsave(&xfer->lock, flags); + wa = xfer->wa; + dev = &wa->usb_iface->dev; + rpipe = xfer->ep->hcpriv; + d_printf(2, dev, "xfer %p#%u: data in done (%zu bytes)\n", + xfer, seg->index, (size_t)urb->actual_length); + seg->status = WA_SEG_DONE; + seg->result = urb->actual_length; + xfer->segs_done++; + rpipe_ready = rpipe_avail_inc(rpipe); + done = __wa_xfer_is_done(xfer); + spin_unlock_irqrestore(&xfer->lock, flags); + if (done) + wa_xfer_completion(xfer); + if (rpipe_ready) + wa_xfer_delayed_run(rpipe); + break; + case -ECONNRESET: /* URB unlinked; no need to do anything */ + case -ENOENT: /* as it was done by the who unlinked us */ + break; + default: /* Other errors ... */ + spin_lock_irqsave(&xfer->lock, flags); + wa = xfer->wa; + dev = &wa->usb_iface->dev; + rpipe = xfer->ep->hcpriv; + if (printk_ratelimit()) + dev_err(dev, "xfer %p#%u: data in error %d\n", + xfer, seg->index, urb->status); + if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, + EDC_ERROR_TIMEFRAME)){ + dev_err(dev, "DTO: URB max acceptable errors " + "exceeded, resetting device\n"); + wa_reset_all(wa); + } + seg->status = WA_SEG_ERROR; + seg->result = urb->status; + xfer->segs_done++; + rpipe_ready = rpipe_avail_inc(rpipe); + __wa_xfer_abort(xfer); + done = __wa_xfer_is_done(xfer); + spin_unlock_irqrestore(&xfer->lock, flags); + if (done) + wa_xfer_completion(xfer); + if (rpipe_ready) + wa_xfer_delayed_run(rpipe); + } + d_fnend(3, NULL, "(urb %p [%d]) = void\n", urb, urb->status); +} + +/* + * Handle an incoming transfer result buffer + * + * Given a transfer result buffer, it completes the transfer (possibly + * scheduling and buffer in read) and then resubmits the DTI URB for a + * new transfer result read. + * + * + * The xfer_result DTI URB state machine + * + * States: OFF | RXR (Read-Xfer-Result) | RBI (Read-Buffer-In) + * + * We start in OFF mode, the first xfer_result notification [through + * wa_handle_notif_xfer()] moves us to RXR by posting the DTI-URB to + * read. + * + * We receive a buffer -- if it is not a xfer_result, we complain and + * repost the DTI-URB. If it is a xfer_result then do the xfer seg + * request accounting. If it is an IN segment, we move to RBI and post + * a BUF-IN-URB to the right buffer. The BUF-IN-URB callback will + * repost the DTI-URB and move to RXR state. if there was no IN + * segment, it will repost the DTI-URB. + * + * We go back to OFF when we detect a ENOENT or ESHUTDOWN (or too many + * errors) in the URBs. + */ +static void wa_xfer_result_cb(struct urb *urb) +{ + int result; + struct wahc *wa = urb->context; + struct device *dev = &wa->usb_iface->dev; + struct wa_xfer_result *xfer_result; + u32 xfer_id; + struct wa_xfer *xfer; + u8 usb_status; + + d_fnstart(3, dev, "(%p)\n", wa); + BUG_ON(wa->dti_urb != urb); + switch (wa->dti_urb->status) { + case 0: + /* We have a xfer result buffer; check it */ + d_printf(2, dev, "DTI: xfer result %d bytes at %p\n", + urb->actual_length, urb->transfer_buffer); + d_dump(3, dev, urb->transfer_buffer, urb->actual_length); + if (wa->dti_urb->actual_length != sizeof(*xfer_result)) { + dev_err(dev, "DTI Error: xfer result--bad size " + "xfer result (%d bytes vs %zu needed)\n", + urb->actual_length, sizeof(*xfer_result)); + break; + } + xfer_result = wa->xfer_result; + if (xfer_result->hdr.bLength != sizeof(*xfer_result)) { + dev_err(dev, "DTI Error: xfer result--" + "bad header length %u\n", + xfer_result->hdr.bLength); + break; + } + if (xfer_result->hdr.bNotifyType != WA_XFER_RESULT) { + dev_err(dev, "DTI Error: xfer result--" + "bad header type 0x%02x\n", + xfer_result->hdr.bNotifyType); + break; + } + usb_status = xfer_result->bTransferStatus & 0x3f; + if (usb_status == WA_XFER_STATUS_ABORTED + || usb_status == WA_XFER_STATUS_NOT_FOUND) + /* taken care of already */ + break; + xfer_id = xfer_result->dwTransferID; + xfer = wa_xfer_get_by_id(wa, xfer_id); + if (xfer == NULL) { + /* FIXME: transaction might have been cancelled */ + dev_err(dev, "DTI Error: xfer result--" + "unknown xfer 0x%08x (status 0x%02x)\n", + xfer_id, usb_status); + break; + } + wa_xfer_result_chew(wa, xfer); + wa_xfer_put(xfer); + break; + case -ENOENT: /* (we killed the URB)...so, no broadcast */ + case -ESHUTDOWN: /* going away! */ + dev_dbg(dev, "DTI: going down! %d\n", urb->status); + goto out; + default: + /* Unknown error */ + if (edc_inc(&wa->dti_edc, EDC_MAX_ERRORS, + EDC_ERROR_TIMEFRAME)) { + dev_err(dev, "DTI: URB max acceptable errors " + "exceeded, resetting device\n"); + wa_reset_all(wa); + goto out; + } + if (printk_ratelimit()) + dev_err(dev, "DTI: URB error %d\n", urb->status); + break; + } + /* Resubmit the DTI URB */ + result = usb_submit_urb(wa->dti_urb, GFP_ATOMIC); + if (result < 0) { + dev_err(dev, "DTI Error: Could not submit DTI URB (%d), " + "resetting\n", result); + wa_reset_all(wa); + } +out: + d_fnend(3, dev, "(%p) = void\n", wa); + return; +} + +/* + * Transfer complete notification + * + * Called from the notif.c code. We get a notification on EP2 saying + * that some endpoint has some transfer result data available. We are + * about to read it. + * + * To speed up things, we always have a URB reading the DTI URB; we + * don't really set it up and start it until the first xfer complete + * notification arrives, which is what we do here. + * + * Follow up in wa_xfer_result_cb(), as that's where the whole state + * machine starts. + * + * So here we just initialize the DTI URB for reading transfer result + * notifications and also the buffer-in URB, for reading buffers. Then + * we just submit the DTI URB. + * + * @wa shall be referenced + */ +void wa_handle_notif_xfer(struct wahc *wa, struct wa_notif_hdr *notif_hdr) +{ + int result; + struct device *dev = &wa->usb_iface->dev; + struct wa_notif_xfer *notif_xfer; + const struct usb_endpoint_descriptor *dti_epd = wa->dti_epd; + + d_fnstart(4, dev, "(%p, %p)\n", wa, notif_hdr); + notif_xfer = container_of(notif_hdr, struct wa_notif_xfer, hdr); + BUG_ON(notif_hdr->bNotifyType != WA_NOTIF_TRANSFER); + + if ((0x80 | notif_xfer->bEndpoint) != dti_epd->bEndpointAddress) { + /* FIXME: hardcoded limitation, adapt */ + dev_err(dev, "BUG: DTI ep is %u, not %u (hack me)\n", + notif_xfer->bEndpoint, dti_epd->bEndpointAddress); + goto error; + } + if (wa->dti_urb != NULL) /* DTI URB already started */ + goto out; + + wa->dti_urb = usb_alloc_urb(0, GFP_KERNEL); + if (wa->dti_urb == NULL) { + dev_err(dev, "Can't allocate DTI URB\n"); + goto error_dti_urb_alloc; + } + usb_fill_bulk_urb( + wa->dti_urb, wa->usb_dev, + usb_rcvbulkpipe(wa->usb_dev, 0x80 | notif_xfer->bEndpoint), + wa->xfer_result, wa->xfer_result_size, + wa_xfer_result_cb, wa); + + wa->buf_in_urb = usb_alloc_urb(0, GFP_KERNEL); + if (wa->buf_in_urb == NULL) { + dev_err(dev, "Can't allocate BUF-IN URB\n"); + goto error_buf_in_urb_alloc; + } + usb_fill_bulk_urb( + wa->buf_in_urb, wa->usb_dev, + usb_rcvbulkpipe(wa->usb_dev, 0x80 | notif_xfer->bEndpoint), + NULL, 0, wa_buf_in_cb, wa); + result = usb_submit_urb(wa->dti_urb, GFP_KERNEL); + if (result < 0) { + dev_err(dev, "DTI Error: Could not submit DTI URB (%d), " + "resetting\n", result); + goto error_dti_urb_submit; + } +out: + d_fnend(4, dev, "(%p, %p) = void\n", wa, notif_hdr); + return; + +error_dti_urb_submit: + usb_put_urb(wa->buf_in_urb); +error_buf_in_urb_alloc: + usb_put_urb(wa->dti_urb); + wa->dti_urb = NULL; +error_dti_urb_alloc: +error: + wa_reset_all(wa); + d_fnend(4, dev, "(%p, %p) = void\n", wa, notif_hdr); + return; +} diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c new file mode 100644 index 000000000000..07c63a31c799 --- /dev/null +++ b/drivers/usb/wusbcore/wusbhc.c @@ -0,0 +1,418 @@ +/* + * Wireless USB Host Controller + * sysfs glue, wusbcore module support and life cycle management + * + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Creation/destruction of wusbhc is split in two parts; that that + * doesn't require the HCD to be added (wusbhc_{create,destroy}) and + * the one that requires (phase B, wusbhc_b_{create,destroy}). + * + * This is so because usb_add_hcd() will start the HC, and thus, all + * the HC specific stuff has to be already initialiazed (like sysfs + * thingies). + */ +#include <linux/device.h> +#include <linux/module.h> +#include "wusbhc.h" + +/** + * Extract the wusbhc that corresponds to a USB Host Controller class device + * + * WARNING! Apply only if @dev is that of a + * wusbhc.usb_hcd.self->class_dev; otherwise, you loose. + */ +static struct wusbhc *usbhc_dev_to_wusbhc(struct device *dev) +{ + struct usb_bus *usb_bus = dev_get_drvdata(dev); + struct usb_hcd *usb_hcd = bus_to_hcd(usb_bus); + return usb_hcd_to_wusbhc(usb_hcd); +} + +/* + * Show & store the current WUSB trust timeout + * + * We don't do locking--it is an 'atomic' value. + * + * The units that we store/show are always MILLISECONDS. However, the + * value of trust_timeout is jiffies. + */ +static ssize_t wusb_trust_timeout_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); + + return scnprintf(buf, PAGE_SIZE, "%u\n", wusbhc->trust_timeout); +} + +static ssize_t wusb_trust_timeout_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); + ssize_t result = -ENOSYS; + unsigned trust_timeout; + + result = sscanf(buf, "%u", &trust_timeout); + if (result != 1) { + result = -EINVAL; + goto out; + } + /* FIXME: maybe we should check for range validity? */ + wusbhc->trust_timeout = trust_timeout; + cancel_delayed_work(&wusbhc->keep_alive_timer); + flush_workqueue(wusbd); + queue_delayed_work(wusbd, &wusbhc->keep_alive_timer, + (trust_timeout * CONFIG_HZ)/1000/2); +out: + return result < 0 ? result : size; +} +static DEVICE_ATTR(wusb_trust_timeout, 0644, wusb_trust_timeout_show, + wusb_trust_timeout_store); + +/* + * Show & store the current WUSB CHID + */ +static ssize_t wusb_chid_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); + ssize_t result = 0; + + if (wusbhc->wuie_host_info != NULL) + result += ckhdid_printf(buf, PAGE_SIZE, + &wusbhc->wuie_host_info->CHID); + return result; +} + +/* + * Store a new CHID + * + * This will (FIXME) trigger many changes. + * + * - Send an all zeros CHID and it will stop the controller + * - Send a non-zero CHID and it will start it + * (unless it was started, it will just change the CHID, + * diconnecting all devices first). + * + * So first we scan the MMC we are sent and then we act on it. We + * read it in the same format as we print it, an ASCII string of 16 + * hex bytes. + * + * See wusbhc_chid_set() for more info. + */ +static ssize_t wusb_chid_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev); + struct wusb_ckhdid chid; + ssize_t result; + + result = sscanf(buf, + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx\n", + &chid.data[0] , &chid.data[1] , + &chid.data[2] , &chid.data[3] , + &chid.data[4] , &chid.data[5] , + &chid.data[6] , &chid.data[7] , + &chid.data[8] , &chid.data[9] , + &chid.data[10], &chid.data[11], + &chid.data[12], &chid.data[13], + &chid.data[14], &chid.data[15]); + if (result != 16) { + dev_err(dev, "Unrecognized CHID (need 16 8-bit hex digits): " + "%d\n", (int)result); + return -EINVAL; + } + result = wusbhc_chid_set(wusbhc, &chid); + return result < 0 ? result : size; +} +static DEVICE_ATTR(wusb_chid, 0644, wusb_chid_show, wusb_chid_store); + +/* Group all the WUSBHC attributes */ +static struct attribute *wusbhc_attrs[] = { + &dev_attr_wusb_trust_timeout.attr, + &dev_attr_wusb_chid.attr, + NULL, +}; + +static struct attribute_group wusbhc_attr_group = { + .name = NULL, /* we want them in the same directory */ + .attrs = wusbhc_attrs, +}; + +/* + * Create a wusbhc instance + * + * NOTEs: + * + * - assumes *wusbhc has been zeroed and wusbhc->usb_hcd has been + * initialized but not added. + * + * - fill out ports_max, mmcies_max and mmcie_{add,rm} before calling. + * + * - fill out wusbhc->uwb_rc and refcount it before calling + * - fill out the wusbhc->sec_modes array + */ +int wusbhc_create(struct wusbhc *wusbhc) +{ + int result = 0; + + wusbhc->trust_timeout = WUSB_TRUST_TIMEOUT_MS; + mutex_init(&wusbhc->mutex); + result = wusbhc_mmcie_create(wusbhc); + if (result < 0) + goto error_mmcie_create; + result = wusbhc_devconnect_create(wusbhc); + if (result < 0) + goto error_devconnect_create; + result = wusbhc_rh_create(wusbhc); + if (result < 0) + goto error_rh_create; + result = wusbhc_sec_create(wusbhc); + if (result < 0) + goto error_sec_create; + return 0; + +error_sec_create: + wusbhc_rh_destroy(wusbhc); +error_rh_create: + wusbhc_devconnect_destroy(wusbhc); +error_devconnect_create: + wusbhc_mmcie_destroy(wusbhc); +error_mmcie_create: + return result; +} +EXPORT_SYMBOL_GPL(wusbhc_create); + +static inline struct kobject *wusbhc_kobj(struct wusbhc *wusbhc) +{ + return &wusbhc->usb_hcd.self.controller->kobj; +} + +/* + * Phase B of a wusbhc instance creation + * + * Creates fields that depend on wusbhc->usb_hcd having been + * added. This is where we create the sysfs files in + * /sys/class/usb_host/usb_hostX/. + * + * NOTE: Assumes wusbhc->usb_hcd has been already added by the upper + * layer (hwahc or whci) + */ +int wusbhc_b_create(struct wusbhc *wusbhc) +{ + int result = 0; + struct device *dev = wusbhc->usb_hcd.self.controller; + + result = sysfs_create_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group); + if (result < 0) { + dev_err(dev, "Cannot register WUSBHC attributes: %d\n", result); + goto error_create_attr_group; + } + + result = wusbhc_pal_register(wusbhc); + if (result < 0) + goto error_pal_register; + return 0; + +error_pal_register: + sysfs_remove_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group); +error_create_attr_group: + return result; +} +EXPORT_SYMBOL_GPL(wusbhc_b_create); + +void wusbhc_b_destroy(struct wusbhc *wusbhc) +{ + wusbhc_pal_unregister(wusbhc); + sysfs_remove_group(wusbhc_kobj(wusbhc), &wusbhc_attr_group); +} +EXPORT_SYMBOL_GPL(wusbhc_b_destroy); + +void wusbhc_destroy(struct wusbhc *wusbhc) +{ + wusbhc_sec_destroy(wusbhc); + wusbhc_rh_destroy(wusbhc); + wusbhc_devconnect_destroy(wusbhc); + wusbhc_mmcie_destroy(wusbhc); +} +EXPORT_SYMBOL_GPL(wusbhc_destroy); + +struct workqueue_struct *wusbd; +EXPORT_SYMBOL_GPL(wusbd); + +/* + * WUSB Cluster ID allocation map + * + * Each WUSB bus in a channel is identified with a Cluster Id in the + * unauth address pace (WUSB1.0[4.3]). We take the range 0xe0 to 0xff + * (that's space for 31 WUSB controllers, as 0xff can't be taken). We + * start taking from 0xff, 0xfe, 0xfd... (hence the += or -= 0xff). + * + * For each one we taken, we pin it in the bitap + */ +#define CLUSTER_IDS 32 +static DECLARE_BITMAP(wusb_cluster_id_table, CLUSTER_IDS); +static DEFINE_SPINLOCK(wusb_cluster_ids_lock); + +/* + * Get a WUSB Cluster ID + * + * Need to release with wusb_cluster_id_put() when done w/ it. + */ +/* FIXME: coordinate with the choose_addres() from the USB stack */ +/* we want to leave the top of the 128 range for cluster addresses and + * the bottom for device addresses (as we map them one on one with + * ports). */ +u8 wusb_cluster_id_get(void) +{ + u8 id; + spin_lock(&wusb_cluster_ids_lock); + id = find_first_zero_bit(wusb_cluster_id_table, CLUSTER_IDS); + if (id > CLUSTER_IDS) { + id = 0; + goto out; + } + set_bit(id, wusb_cluster_id_table); + id = (u8) 0xff - id; +out: + spin_unlock(&wusb_cluster_ids_lock); + return id; + +} +EXPORT_SYMBOL_GPL(wusb_cluster_id_get); + +/* + * Release a WUSB Cluster ID + * + * Obtained it with wusb_cluster_id_get() + */ +void wusb_cluster_id_put(u8 id) +{ + id = 0xff - id; + BUG_ON(id >= CLUSTER_IDS); + spin_lock(&wusb_cluster_ids_lock); + WARN_ON(!test_bit(id, wusb_cluster_id_table)); + clear_bit(id, wusb_cluster_id_table); + spin_unlock(&wusb_cluster_ids_lock); +} +EXPORT_SYMBOL_GPL(wusb_cluster_id_put); + +/** + * wusbhc_giveback_urb - return an URB to the USB core + * @wusbhc: the host controller the URB is from. + * @urb: the URB. + * @status: the URB's status. + * + * Return an URB to the USB core doing some additional WUSB specific + * processing. + * + * - After a successful transfer, update the trust timeout timestamp + * for the WUSB device. + * + * - [WUSB] sections 4.13 and 7.5.1 specifies the stop retrasmittion + * condition for the WCONNECTACK_IE is that the host has observed + * the associated device responding to a control transfer. + */ +void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb, int status) +{ + struct wusb_dev *wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev); + + if (status == 0) { + wusb_dev->entry_ts = jiffies; + + /* wusbhc_devconnect_acked() can't be called from from + atomic context so defer it to a work queue. */ + if (!list_empty(&wusb_dev->cack_node)) + queue_work(wusbd, &wusb_dev->devconnect_acked_work); + } + + usb_hcd_giveback_urb(&wusbhc->usb_hcd, urb, status); +} +EXPORT_SYMBOL_GPL(wusbhc_giveback_urb); + +/** + * wusbhc_reset_all - reset the HC hardware + * @wusbhc: the host controller to reset. + * + * Request a full hardware reset of the chip. This will also reset + * the radio controller and any other PALs. + */ +void wusbhc_reset_all(struct wusbhc *wusbhc) +{ + uwb_rc_reset_all(wusbhc->uwb_rc); +} +EXPORT_SYMBOL_GPL(wusbhc_reset_all); + +static struct notifier_block wusb_usb_notifier = { + .notifier_call = wusb_usb_ncb, + .priority = INT_MAX /* Need to be called first of all */ +}; + +static int __init wusbcore_init(void) +{ + int result; + result = wusb_crypto_init(); + if (result < 0) + goto error_crypto_init; + /* WQ is singlethread because we need to serialize notifications */ + wusbd = create_singlethread_workqueue("wusbd"); + if (wusbd == NULL) { + result = -ENOMEM; + printk(KERN_ERR "WUSB-core: Cannot create wusbd workqueue\n"); + goto error_wusbd_create; + } + usb_register_notify(&wusb_usb_notifier); + bitmap_zero(wusb_cluster_id_table, CLUSTER_IDS); + set_bit(0, wusb_cluster_id_table); /* reserve Cluster ID 0xff */ + return 0; + +error_wusbd_create: + wusb_crypto_exit(); +error_crypto_init: + return result; + +} +module_init(wusbcore_init); + +static void __exit wusbcore_exit(void) +{ + clear_bit(0, wusb_cluster_id_table); + if (!bitmap_empty(wusb_cluster_id_table, CLUSTER_IDS)) { + char buf[256]; + bitmap_scnprintf(buf, sizeof(buf), wusb_cluster_id_table, + CLUSTER_IDS); + printk(KERN_ERR "BUG: WUSB Cluster IDs not released " + "on exit: %s\n", buf); + WARN_ON(1); + } + usb_unregister_notify(&wusb_usb_notifier); + destroy_workqueue(wusbd); + wusb_crypto_exit(); +} +module_exit(wusbcore_exit); + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("Wireless USB core"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/wusbcore/wusbhc.h b/drivers/usb/wusbcore/wusbhc.h new file mode 100644 index 000000000000..d0c132434f1b --- /dev/null +++ b/drivers/usb/wusbcore/wusbhc.h @@ -0,0 +1,495 @@ +/* + * Wireless USB Host Controller + * Common infrastructure for WHCI and HWA WUSB-HC drivers + * + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * This driver implements parts common to all Wireless USB Host + * Controllers (struct wusbhc, embedding a struct usb_hcd) and is used + * by: + * + * - hwahc: HWA, USB-dongle that implements a Wireless USB host + * controller, (Wireless USB 1.0 Host-Wire-Adapter specification). + * + * - whci: WHCI, a PCI card with a wireless host controller + * (Wireless Host Controller Interface 1.0 specification). + * + * Check out the Design-overview.txt file in the source documentation + * for other details on the implementation. + * + * Main blocks: + * + * rh Root Hub emulation (part of the HCD glue) + * + * devconnect Handle all the issues related to device connection, + * authentication, disconnection, timeout, reseting, + * keepalives, etc. + * + * mmc MMC IE broadcasting handling + * + * A host controller driver just initializes its stuff and as part of + * that, creates a 'struct wusbhc' instance that handles all the + * common WUSB mechanisms. Links in the function ops that are specific + * to it and then registers the host controller. Ready to run. + */ + +#ifndef __WUSBHC_H__ +#define __WUSBHC_H__ + +#include <linux/usb.h> +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/kref.h> +#include <linux/workqueue.h> +/* FIXME: Yes, I know: BAD--it's not my fault the USB HC iface is not + * public */ +#include <linux/../../drivers/usb/core/hcd.h> +#include <linux/uwb.h> +#include <linux/usb/wusb.h> + + +/** + * Wireless USB device + * + * Describe a WUSB device connected to the cluster. This struct + * belongs to the 'struct wusb_port' it is attached to and it is + * responsible for putting and clearing the pointer to it. + * + * Note this "complements" the 'struct usb_device' that the usb_hcd + * keeps for each connected USB device. However, it extends some + * information that is not available (there is no hcpriv ptr in it!) + * *and* most importantly, it's life cycle is different. It is created + * as soon as we get a DN_Connect (connect request notification) from + * the device through the WUSB host controller; the USB stack doesn't + * create the device until we authenticate it. FIXME: this will + * change. + * + * @bos: This is allocated when the BOS descriptors are read from + * the device and freed upon the wusb_dev struct dying. + * @wusb_cap_descr: points into @bos, and has been verified to be size + * safe. + */ +struct wusb_dev { + struct kref refcnt; + struct wusbhc *wusbhc; + struct list_head cack_node; /* Connect-Ack list */ + u8 port_idx; + u8 addr; + u8 beacon_type:4; + struct usb_encryption_descriptor ccm1_etd; + struct wusb_ckhdid cdid; + unsigned long entry_ts; + struct usb_bos_descriptor *bos; + struct usb_wireless_cap_descriptor *wusb_cap_descr; + struct uwb_mas_bm availability; + struct work_struct devconnect_acked_work; + struct urb *set_gtk_urb; + struct usb_ctrlrequest *set_gtk_req; + struct usb_device *usb_dev; +}; + +#define WUSB_DEV_ADDR_UNAUTH 0x80 + +static inline void wusb_dev_init(struct wusb_dev *wusb_dev) +{ + kref_init(&wusb_dev->refcnt); + /* no need to init the cack_node */ +} + +extern void wusb_dev_destroy(struct kref *_wusb_dev); + +static inline struct wusb_dev *wusb_dev_get(struct wusb_dev *wusb_dev) +{ + kref_get(&wusb_dev->refcnt); + return wusb_dev; +} + +static inline void wusb_dev_put(struct wusb_dev *wusb_dev) +{ + kref_put(&wusb_dev->refcnt, wusb_dev_destroy); +} + +/** + * Wireless USB Host Controlller root hub "fake" ports + * (state and device information) + * + * Wireless USB is wireless, so there are no ports; but we + * fake'em. Each RC can connect a max of devices at the same time + * (given in the Wireless Adapter descriptor, bNumPorts or WHCI's + * caps), referred to in wusbhc->ports_max. + * + * See rh.c for more information. + * + * The @status and @change use the same bits as in USB2.0[11.24.2.7], + * so we don't have to do much when getting the port's status. + * + * WUSB1.0[7.1], USB2.0[11.24.2.7.1,fig 11-10], + * include/linux/usb_ch9.h (#define USB_PORT_STAT_*) + */ +struct wusb_port { + u16 status; + u16 change; + struct wusb_dev *wusb_dev; /* connected device's info */ + unsigned reset_count; + u32 ptk_tkid; +}; + +/** + * WUSB Host Controller specifics + * + * All fields that are common to all Wireless USB controller types + * (HWA and WHCI) are grouped here. Host Controller + * functions/operations that only deal with general Wireless USB HC + * issues use this data type to refer to the host. + * + * @usb_hcd Instantiation of a USB host controller + * (initialized by upper layer [HWA=HC or WHCI]. + * + * @dev Device that implements this; initialized by the + * upper layer (HWA-HC, WHCI...); this device should + * have a refcount. + * + * @trust_timeout After this time without hearing for device + * activity, we consider the device gone and we have to + * re-authenticate. + * + * Can be accessed w/o locking--however, read to a + * local variable then use. + * + * @chid WUSB Cluster Host ID: this is supposed to be a + * unique value that doesn't change across reboots (so + * that your devices do not require re-association). + * + * Read/Write protected by @mutex + * + * @dev_info This array has ports_max elements. It is used to + * give the HC information about the WUSB devices (see + * 'struct wusb_dev_info'). + * + * For HWA we need to allocate it in heap; for WHCI it + * needs to be permanently mapped, so we keep it for + * both and make it easy. Call wusbhc->dev_info_set() + * to update an entry. + * + * @ports_max Number of simultaneous device connections (fake + * ports) this HC will take. Read-only. + * + * @port Array of port status for each fake root port. Guaranteed to + * always be the same lenght during device existence + * [this allows for some unlocked but referenced reading]. + * + * @mmcies_max Max number of Information Elements this HC can send + * in its MMC. Read-only. + * + * @mmcie_add HC specific operation (WHCI or HWA) for adding an + * MMCIE. + * + * @mmcie_rm HC specific operation (WHCI or HWA) for removing an + * MMCIE. + * + * @enc_types Array which describes the encryptions methods + * supported by the host as described in WUSB1.0 -- + * one entry per supported method. As of WUSB1.0 there + * is only four methods, we make space for eight just in + * case they decide to add some more (and pray they do + * it in sequential order). if 'enc_types[enc_method] + * != 0', then it is supported by the host. enc_method + * is USB_ENC_TYPE*. + * + * @set_ptk: Set the PTK and enable encryption for a device. Or, if + * the supplied key is NULL, disable encryption for that + * device. + * + * @set_gtk: Set the GTK to be used for all future broadcast packets + * (i.e., MMCs). With some hardware, setting the GTK may start + * MMC transmission. + * + * NOTE: + * + * - If wusb_dev->usb_dev is not NULL, then usb_dev is valid + * (wusb_dev has a refcount on it). Likewise, if usb_dev->wusb_dev + * is not NULL, usb_dev->wusb_dev is valid (usb_dev keeps a + * refcount on it). + * + * Most of the times when you need to use it, it will be non-NULL, + * so there is no real need to check for it (wusb_dev will + * dissapear before usb_dev). + * + * - The following fields need to be filled out before calling + * wusbhc_create(): ports_max, mmcies_max, mmcie_{add,rm}. + * + * - there is no wusbhc_init() method, we do everything in + * wusbhc_create(). + * + * - Creation is done in two phases, wusbhc_create() and + * wusbhc_create_b(); b are the parts that need to be called after + * calling usb_hcd_add(&wusbhc->usb_hcd). + */ +struct wusbhc { + struct usb_hcd usb_hcd; /* HAS TO BE 1st */ + struct device *dev; + struct uwb_rc *uwb_rc; + struct uwb_pal pal; + + unsigned trust_timeout; /* in jiffies */ + struct wuie_host_info *wuie_host_info; /* Includes CHID */ + + struct mutex mutex; /* locks everything else */ + u16 cluster_id; /* Wireless USB Cluster ID */ + struct wusb_port *port; /* Fake port status handling */ + struct wusb_dev_info *dev_info; /* for Set Device Info mgmt */ + u8 ports_max; + unsigned active:1; /* currently xmit'ing MMCs */ + struct wuie_keep_alive keep_alive_ie; /* protected by mutex */ + struct delayed_work keep_alive_timer; + struct list_head cack_list; /* Connect acknowledging */ + size_t cack_count; /* protected by 'mutex' */ + struct wuie_connect_ack cack_ie; + struct uwb_rsv *rsv; /* cluster bandwidth reservation */ + + struct mutex mmcie_mutex; /* MMC WUIE handling */ + struct wuie_hdr **mmcie; /* WUIE array */ + u8 mmcies_max; + /* FIXME: make wusbhc_ops? */ + int (*start)(struct wusbhc *wusbhc); + void (*stop)(struct wusbhc *wusbhc); + int (*mmcie_add)(struct wusbhc *wusbhc, u8 interval, u8 repeat_cnt, + u8 handle, struct wuie_hdr *wuie); + int (*mmcie_rm)(struct wusbhc *wusbhc, u8 handle); + int (*dev_info_set)(struct wusbhc *, struct wusb_dev *wusb_dev); + int (*bwa_set)(struct wusbhc *wusbhc, s8 stream_index, + const struct uwb_mas_bm *); + int (*set_ptk)(struct wusbhc *wusbhc, u8 port_idx, + u32 tkid, const void *key, size_t key_size); + int (*set_gtk)(struct wusbhc *wusbhc, + u32 tkid, const void *key, size_t key_size); + int (*set_num_dnts)(struct wusbhc *wusbhc, u8 interval, u8 slots); + + struct { + struct usb_key_descriptor descr; + u8 data[16]; /* GTK key data */ + } __attribute__((packed)) gtk; + u8 gtk_index; + u32 gtk_tkid; + struct work_struct gtk_rekey_done_work; + int pending_set_gtks; + + struct usb_encryption_descriptor *ccm1_etd; +}; + +#define usb_hcd_to_wusbhc(u) container_of((u), struct wusbhc, usb_hcd) + + +extern int wusbhc_create(struct wusbhc *); +extern int wusbhc_b_create(struct wusbhc *); +extern void wusbhc_b_destroy(struct wusbhc *); +extern void wusbhc_destroy(struct wusbhc *); +extern int wusb_dev_sysfs_add(struct wusbhc *, struct usb_device *, + struct wusb_dev *); +extern void wusb_dev_sysfs_rm(struct wusb_dev *); +extern int wusbhc_sec_create(struct wusbhc *); +extern int wusbhc_sec_start(struct wusbhc *); +extern void wusbhc_sec_stop(struct wusbhc *); +extern void wusbhc_sec_destroy(struct wusbhc *); +extern void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb, + int status); +void wusbhc_reset_all(struct wusbhc *wusbhc); + +int wusbhc_pal_register(struct wusbhc *wusbhc); +void wusbhc_pal_unregister(struct wusbhc *wusbhc); + +/* + * Return @usb_dev's @usb_hcd (properly referenced) or NULL if gone + * + * @usb_dev: USB device, UNLOCKED and referenced (or otherwise, safe ptr) + * + * This is a safe assumption as @usb_dev->bus is referenced all the + * time during the @usb_dev life cycle. + */ +static inline struct usb_hcd *usb_hcd_get_by_usb_dev(struct usb_device *usb_dev) +{ + struct usb_hcd *usb_hcd; + usb_hcd = container_of(usb_dev->bus, struct usb_hcd, self); + return usb_get_hcd(usb_hcd); +} + +/* + * Increment the reference count on a wusbhc. + * + * @wusbhc's life cycle is identical to that of the underlying usb_hcd. + */ +static inline struct wusbhc *wusbhc_get(struct wusbhc *wusbhc) +{ + return usb_get_hcd(&wusbhc->usb_hcd) ? wusbhc : NULL; +} + +/* + * Return the wusbhc associated to a @usb_dev + * + * @usb_dev: USB device, UNLOCKED and referenced (or otherwise, safe ptr) + * + * @returns: wusbhc for @usb_dev; NULL if the @usb_dev is being torn down. + * WARNING: referenced at the usb_hcd level, unlocked + * + * FIXME: move offline + */ +static inline struct wusbhc *wusbhc_get_by_usb_dev(struct usb_device *usb_dev) +{ + struct wusbhc *wusbhc = NULL; + struct usb_hcd *usb_hcd; + if (usb_dev->devnum > 1 && !usb_dev->wusb) { + /* but root hubs */ + dev_err(&usb_dev->dev, "devnum %d wusb %d\n", usb_dev->devnum, + usb_dev->wusb); + BUG_ON(usb_dev->devnum > 1 && !usb_dev->wusb); + } + usb_hcd = usb_hcd_get_by_usb_dev(usb_dev); + if (usb_hcd == NULL) + return NULL; + BUG_ON(usb_hcd->wireless == 0); + return wusbhc = usb_hcd_to_wusbhc(usb_hcd); +} + + +static inline void wusbhc_put(struct wusbhc *wusbhc) +{ + usb_put_hcd(&wusbhc->usb_hcd); +} + +int wusbhc_start(struct wusbhc *wusbhc, const struct wusb_ckhdid *chid); +void wusbhc_stop(struct wusbhc *wusbhc); +extern int wusbhc_chid_set(struct wusbhc *, const struct wusb_ckhdid *); + +/* Device connect handling */ +extern int wusbhc_devconnect_create(struct wusbhc *); +extern void wusbhc_devconnect_destroy(struct wusbhc *); +extern int wusbhc_devconnect_start(struct wusbhc *wusbhc, + const struct wusb_ckhdid *chid); +extern void wusbhc_devconnect_stop(struct wusbhc *wusbhc); +extern int wusbhc_devconnect_auth(struct wusbhc *, u8); +extern void wusbhc_handle_dn(struct wusbhc *, u8 srcaddr, + struct wusb_dn_hdr *dn_hdr, size_t size); +extern int wusbhc_dev_reset(struct wusbhc *wusbhc, u8 port); +extern void __wusbhc_dev_disable(struct wusbhc *wusbhc, u8 port); +extern int wusb_usb_ncb(struct notifier_block *nb, unsigned long val, + void *priv); +extern int wusb_set_dev_addr(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev, + u8 addr); + +/* Wireless USB fake Root Hub methods */ +extern int wusbhc_rh_create(struct wusbhc *); +extern void wusbhc_rh_destroy(struct wusbhc *); + +extern int wusbhc_rh_status_data(struct usb_hcd *, char *); +extern int wusbhc_rh_control(struct usb_hcd *, u16, u16, u16, char *, u16); +extern int wusbhc_rh_suspend(struct usb_hcd *); +extern int wusbhc_rh_resume(struct usb_hcd *); +extern int wusbhc_rh_start_port_reset(struct usb_hcd *, unsigned); + +/* MMC handling */ +extern int wusbhc_mmcie_create(struct wusbhc *); +extern void wusbhc_mmcie_destroy(struct wusbhc *); +extern int wusbhc_mmcie_set(struct wusbhc *, u8 interval, u8 repeat_cnt, + struct wuie_hdr *); +extern void wusbhc_mmcie_rm(struct wusbhc *, struct wuie_hdr *); + +/* Bandwidth reservation */ +int wusbhc_rsv_establish(struct wusbhc *wusbhc); +void wusbhc_rsv_terminate(struct wusbhc *wusbhc); + +/* + * I've always said + * I wanted a wedding in a church... + * + * but lately I've been thinking about + * the Botanical Gardens. + * + * We could do it by the tulips. + * It'll be beautiful + * + * --Security! + */ +extern int wusb_dev_sec_add(struct wusbhc *, struct usb_device *, + struct wusb_dev *); +extern void wusb_dev_sec_rm(struct wusb_dev *) ; +extern int wusb_dev_4way_handshake(struct wusbhc *, struct wusb_dev *, + struct wusb_ckhdid *ck); +void wusbhc_gtk_rekey(struct wusbhc *wusbhc); + + +/* WUSB Cluster ID handling */ +extern u8 wusb_cluster_id_get(void); +extern void wusb_cluster_id_put(u8); + +/* + * wusb_port_by_idx - return the port associated to a zero-based port index + * + * NOTE: valid without locking as long as wusbhc is referenced (as the + * number of ports doesn't change). The data pointed to has to + * be verified though :) + */ +static inline struct wusb_port *wusb_port_by_idx(struct wusbhc *wusbhc, + u8 port_idx) +{ + return &wusbhc->port[port_idx]; +} + +/* + * wusb_port_no_to_idx - Convert port number (per usb_dev->portnum) to + * a port_idx. + * + * USB stack USB ports are 1 based!! + * + * NOTE: only valid for WUSB devices!!! + */ +static inline u8 wusb_port_no_to_idx(u8 port_no) +{ + return port_no - 1; +} + +extern struct wusb_dev *__wusb_dev_get_by_usb_dev(struct wusbhc *, + struct usb_device *); + +/* + * Return a referenced wusb_dev given a @usb_dev + * + * Returns NULL if the usb_dev is being torn down. + * + * FIXME: move offline + */ +static inline +struct wusb_dev *wusb_dev_get_by_usb_dev(struct usb_device *usb_dev) +{ + struct wusbhc *wusbhc; + struct wusb_dev *wusb_dev; + wusbhc = wusbhc_get_by_usb_dev(usb_dev); + if (wusbhc == NULL) + return NULL; + mutex_lock(&wusbhc->mutex); + wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, usb_dev); + mutex_unlock(&wusbhc->mutex); + wusbhc_put(wusbhc); + return wusb_dev; +} + +/* Misc */ + +extern struct workqueue_struct *wusbd; +#endif /* #ifndef __WUSBHC_H__ */ diff --git a/drivers/uwb/Kconfig b/drivers/uwb/Kconfig new file mode 100644 index 000000000000..ca783127af36 --- /dev/null +++ b/drivers/uwb/Kconfig @@ -0,0 +1,90 @@ +# +# UWB device configuration +# + +menuconfig UWB + tristate "Ultra Wideband devices (EXPERIMENTAL)" + depends on EXPERIMENTAL + depends on PCI + default n + help + UWB is a high-bandwidth, low-power, point-to-point radio + technology using a wide spectrum (3.1-10.6GHz). It is + optimized for in-room use (480Mbps at 2 meters, 110Mbps at + 10m). It serves as the transport layer for other protocols, + such as Wireless USB (WUSB), IP (WLP) and upcoming + Bluetooth and 1394 + + The topology is peer to peer; however, higher level + protocols (such as WUSB) might impose a master/slave + relationship. + + Say Y here if your computer has UWB radio controllers (USB or PCI) + based. You will need to enable the radio controllers + below. It is ok to select all of them, no harm done. + + For more help check the UWB and WUSB related files in + <file:Documentation/usb/>. + + To compile the UWB stack as a module, choose M here. + +if UWB + +config UWB_HWA + tristate "UWB Radio Control driver for WUSB-compliant USB dongles (HWA)" + depends on USB + help + This driver enables the radio controller for HWA USB + devices. HWA stands for Host Wire Adapter, and it is a UWB + Radio Controller connected to your system via USB. Most of + them come with a Wireless USB host controller also. + + To compile this driver select Y (built in) or M (module). It + is safe to select any even if you do not have the hardware. + +config UWB_WHCI + tristate "UWB Radio Control driver for WHCI-compliant cards" + depends on PCI + help + This driver enables the radio controller for WHCI cards. + + WHCI is an specification developed by Intel + (http://www.intel.com/technology/comms/wusb/whci.htm) much + in the spirit of USB's EHCI, but for UWB and Wireless USB + radio/host controllers connected via memmory mapping (eg: + PCI). Most of these cards come also with a Wireless USB host + controller. + + To compile this driver select Y (built in) or M (module). It + is safe to select any even if you do not have the hardware. + +config UWB_WLP + tristate "Support WiMedia Link Protocol (Ethernet/IP over UWB)" + depends on UWB && NET + help + This is a common library for drivers that implement + networking over UWB. + +config UWB_I1480U + tristate "Support for Intel Wireless UWB Link 1480 HWA" + depends on UWB_HWA + select FW_LOADER + help + This driver enables support for the i1480 when connected via + USB. It consists of a firmware uploader that will enable it + to behave as an HWA device. + + To compile this driver select Y (built in) or M (module). It + is safe to select any even if you do not have the hardware. + +config UWB_I1480U_WLP + tristate "Support for Intel Wireless UWB Link 1480 HWA's WLP interface" + depends on UWB_I1480U && UWB_WLP && NET + help + This driver enables WLP support for the i1480 when connected via + USB. WLP is the WiMedia Link Protocol, or IP over UWB. + + To compile this driver select Y (built in) or M (module). It + is safe to select any even if you don't have the hardware. + +endif # UWB diff --git a/drivers/uwb/Makefile b/drivers/uwb/Makefile new file mode 100644 index 000000000000..257e6908304c --- /dev/null +++ b/drivers/uwb/Makefile @@ -0,0 +1,29 @@ +obj-$(CONFIG_UWB) += uwb.o +obj-$(CONFIG_UWB_WLP) += wlp/ +obj-$(CONFIG_UWB_WHCI) += umc.o whci.o whc-rc.o +obj-$(CONFIG_UWB_HWA) += hwa-rc.o +obj-$(CONFIG_UWB_I1480U) += i1480/ + +uwb-objs := \ + address.o \ + beacon.o \ + driver.o \ + drp.o \ + drp-avail.o \ + drp-ie.o \ + est.o \ + ie.o \ + lc-dev.o \ + lc-rc.o \ + neh.o \ + pal.o \ + reset.o \ + rsv.o \ + scan.o \ + uwb-debug.o \ + uwbd.o + +umc-objs := \ + umc-bus.o \ + umc-dev.o \ + umc-drv.o diff --git a/drivers/uwb/address.c b/drivers/uwb/address.c new file mode 100644 index 000000000000..1664ae5f1706 --- /dev/null +++ b/drivers/uwb/address.c @@ -0,0 +1,374 @@ +/* + * Ultra Wide Band + * Address management + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/random.h> +#include <linux/etherdevice.h> +#include <linux/uwb/debug.h> +#include "uwb-internal.h" + + +/** Device Address Management command */ +struct uwb_rc_cmd_dev_addr_mgmt { + struct uwb_rccb rccb; + u8 bmOperationType; + u8 baAddr[6]; +} __attribute__((packed)); + + +/** + * Low level command for setting/getting UWB radio's addresses + * + * @hwarc: HWA Radio Control interface instance + * @bmOperationType: + * Set/get, MAC/DEV (see WUSB1.0[8.6.2.2]) + * @baAddr: address buffer--assumed to have enough data to hold + * the address type requested. + * @reply: Pointer to reply buffer (can be stack allocated) + * @returns: 0 if ok, < 0 errno code on error. + * + * @cmd has to be allocated because USB cannot grok USB or vmalloc + * buffers depending on your combination of host architecture. + */ +static +int uwb_rc_dev_addr_mgmt(struct uwb_rc *rc, + u8 bmOperationType, const u8 *baAddr, + struct uwb_rc_evt_dev_addr_mgmt *reply) +{ + int result; + struct uwb_rc_cmd_dev_addr_mgmt *cmd; + + result = -ENOMEM; + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + goto error_kzalloc; + cmd->rccb.bCommandType = UWB_RC_CET_GENERAL; + cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_DEV_ADDR_MGMT); + cmd->bmOperationType = bmOperationType; + if (baAddr) { + size_t size = 0; + switch (bmOperationType >> 1) { + case 0: size = 2; break; + case 1: size = 6; break; + default: BUG(); + } + memcpy(cmd->baAddr, baAddr, size); + } + reply->rceb.bEventType = UWB_RC_CET_GENERAL; + reply->rceb.wEvent = UWB_RC_CMD_DEV_ADDR_MGMT; + result = uwb_rc_cmd(rc, "DEV-ADDR-MGMT", + &cmd->rccb, sizeof(*cmd), + &reply->rceb, sizeof(*reply)); + if (result < 0) + goto error_cmd; + if (result < sizeof(*reply)) { + dev_err(&rc->uwb_dev.dev, + "DEV-ADDR-MGMT: not enough data replied: " + "%d vs %zu bytes needed\n", result, sizeof(*reply)); + result = -ENOMSG; + } else if (reply->bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(&rc->uwb_dev.dev, + "DEV-ADDR-MGMT: command execution failed: %s (%d)\n", + uwb_rc_strerror(reply->bResultCode), + reply->bResultCode); + result = -EIO; + } else + result = 0; +error_cmd: + kfree(cmd); +error_kzalloc: + return result; +} + + +/** + * Set the UWB RC MAC or device address. + * + * @rc: UWB Radio Controller + * @_addr: Pointer to address to write [assumed to be either a + * 'struct uwb_mac_addr *' or a 'struct uwb_dev_addr *']. + * @type: Type of address to set (UWB_ADDR_DEV or UWB_ADDR_MAC). + * @returns: 0 if ok, < 0 errno code on error. + * + * Some anal retentivity here: even if both 'struct + * uwb_{dev,mac}_addr' have the actual byte array in the same offset + * and I could just pass _addr to hwarc_cmd_dev_addr_mgmt(), I prefer + * to use some syntatic sugar in case someday we decide to change the + * format of the structs. The compiler will optimize it out anyway. + */ +static int uwb_rc_addr_set(struct uwb_rc *rc, + const void *_addr, enum uwb_addr_type type) +{ + int result; + u8 bmOperationType = 0x1; /* Set address */ + const struct uwb_dev_addr *dev_addr = _addr; + const struct uwb_mac_addr *mac_addr = _addr; + struct uwb_rc_evt_dev_addr_mgmt reply; + const u8 *baAddr; + + result = -EINVAL; + switch (type) { + case UWB_ADDR_DEV: + baAddr = dev_addr->data; + break; + case UWB_ADDR_MAC: + baAddr = mac_addr->data; + bmOperationType |= 0x2; + break; + default: + return result; + } + return uwb_rc_dev_addr_mgmt(rc, bmOperationType, baAddr, &reply); +} + + +/** + * Get the UWB radio's MAC or device address. + * + * @rc: UWB Radio Controller + * @_addr: Where to write the address data [assumed to be either a + * 'struct uwb_mac_addr *' or a 'struct uwb_dev_addr *']. + * @type: Type of address to get (UWB_ADDR_DEV or UWB_ADDR_MAC). + * @returns: 0 if ok (and *_addr set), < 0 errno code on error. + * + * See comment in uwb_rc_addr_set() about anal retentivity in the + * type handling of the address variables. + */ +static int uwb_rc_addr_get(struct uwb_rc *rc, + void *_addr, enum uwb_addr_type type) +{ + int result; + u8 bmOperationType = 0x0; /* Get address */ + struct uwb_rc_evt_dev_addr_mgmt evt; + struct uwb_dev_addr *dev_addr = _addr; + struct uwb_mac_addr *mac_addr = _addr; + u8 *baAddr; + + result = -EINVAL; + switch (type) { + case UWB_ADDR_DEV: + baAddr = dev_addr->data; + break; + case UWB_ADDR_MAC: + bmOperationType |= 0x2; + baAddr = mac_addr->data; + break; + default: + return result; + } + result = uwb_rc_dev_addr_mgmt(rc, bmOperationType, baAddr, &evt); + if (result == 0) + switch (type) { + case UWB_ADDR_DEV: + memcpy(&dev_addr->data, evt.baAddr, + sizeof(dev_addr->data)); + break; + case UWB_ADDR_MAC: + memcpy(&mac_addr->data, evt.baAddr, + sizeof(mac_addr->data)); + break; + default: /* shut gcc up */ + BUG(); + } + return result; +} + + +/** Get @rc's MAC address to @addr */ +int uwb_rc_mac_addr_get(struct uwb_rc *rc, + struct uwb_mac_addr *addr) { + return uwb_rc_addr_get(rc, addr, UWB_ADDR_MAC); +} +EXPORT_SYMBOL_GPL(uwb_rc_mac_addr_get); + + +/** Get @rc's device address to @addr */ +int uwb_rc_dev_addr_get(struct uwb_rc *rc, + struct uwb_dev_addr *addr) { + return uwb_rc_addr_get(rc, addr, UWB_ADDR_DEV); +} +EXPORT_SYMBOL_GPL(uwb_rc_dev_addr_get); + + +/** Set @rc's address to @addr */ +int uwb_rc_mac_addr_set(struct uwb_rc *rc, + const struct uwb_mac_addr *addr) +{ + int result = -EINVAL; + mutex_lock(&rc->uwb_dev.mutex); + result = uwb_rc_addr_set(rc, addr, UWB_ADDR_MAC); + mutex_unlock(&rc->uwb_dev.mutex); + return result; +} + + +/** Set @rc's address to @addr */ +int uwb_rc_dev_addr_set(struct uwb_rc *rc, + const struct uwb_dev_addr *addr) +{ + int result = -EINVAL; + mutex_lock(&rc->uwb_dev.mutex); + result = uwb_rc_addr_set(rc, addr, UWB_ADDR_DEV); + rc->uwb_dev.dev_addr = *addr; + mutex_unlock(&rc->uwb_dev.mutex); + return result; +} + +/* Returns !0 if given address is already assigned to device. */ +int __uwb_mac_addr_assigned_check(struct device *dev, void *_addr) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_mac_addr *addr = _addr; + + if (!uwb_mac_addr_cmp(addr, &uwb_dev->mac_addr)) + return !0; + return 0; +} + +/* Returns !0 if given address is already assigned to device. */ +int __uwb_dev_addr_assigned_check(struct device *dev, void *_addr) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_dev_addr *addr = _addr; + if (!uwb_dev_addr_cmp(addr, &uwb_dev->dev_addr)) + return !0; + return 0; +} + +/** + * uwb_dev_addr_assign - assigned a generated DevAddr to a radio controller + * @rc: the (local) radio controller device requiring a new DevAddr + * + * A new DevAddr is required when: + * - first setting up a radio controller + * - if the hardware reports a DevAddr conflict + * + * The DevAddr is randomly generated in the generated DevAddr range + * [0x100, 0xfeff]. The number of devices in a beacon group is limited + * by mMaxBPLength (96) so this address space will never be exhausted. + * + * [ECMA-368] 17.1.1, 17.16. + */ +int uwb_rc_dev_addr_assign(struct uwb_rc *rc) +{ + struct uwb_dev_addr new_addr; + + do { + get_random_bytes(new_addr.data, sizeof(new_addr.data)); + } while (new_addr.data[0] == 0x00 || new_addr.data[0] == 0xff + || __uwb_dev_addr_assigned(rc, &new_addr)); + + return uwb_rc_dev_addr_set(rc, &new_addr); +} + +/** + * uwbd_evt_handle_rc_dev_addr_conflict - handle a DEV_ADDR_CONFLICT event + * @evt: the DEV_ADDR_CONFLICT notification from the radio controller + * + * A new (non-conflicting) DevAddr is assigned to the radio controller. + * + * [ECMA-368] 17.1.1.1. + */ +int uwbd_evt_handle_rc_dev_addr_conflict(struct uwb_event *evt) +{ + struct uwb_rc *rc = evt->rc; + + return uwb_rc_dev_addr_assign(rc); +} + +/* + * Print the 48-bit EUI MAC address of the radio controller when + * reading /sys/class/uwb_rc/XX/mac_address + */ +static ssize_t uwb_rc_mac_addr_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_rc *rc = uwb_dev->rc; + struct uwb_mac_addr addr; + ssize_t result; + + mutex_lock(&rc->uwb_dev.mutex); + result = uwb_rc_addr_get(rc, &addr, UWB_ADDR_MAC); + mutex_unlock(&rc->uwb_dev.mutex); + if (result >= 0) { + result = uwb_mac_addr_print(buf, UWB_ADDR_STRSIZE, &addr); + buf[result++] = '\n'; + } + return result; +} + +/* + * Parse a 48 bit address written to /sys/class/uwb_rc/XX/mac_address + * and if correct, set it. + */ +static ssize_t uwb_rc_mac_addr_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_rc *rc = uwb_dev->rc; + struct uwb_mac_addr addr; + ssize_t result; + + result = sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx\n", + &addr.data[0], &addr.data[1], &addr.data[2], + &addr.data[3], &addr.data[4], &addr.data[5]); + if (result != 6) { + result = -EINVAL; + goto out; + } + if (is_multicast_ether_addr(addr.data)) { + dev_err(&rc->uwb_dev.dev, "refusing to set multicast " + "MAC address %s\n", buf); + result = -EINVAL; + goto out; + } + result = uwb_rc_mac_addr_set(rc, &addr); + if (result == 0) + rc->uwb_dev.mac_addr = addr; +out: + return result < 0 ? result : size; +} +DEVICE_ATTR(mac_address, S_IRUGO | S_IWUSR, uwb_rc_mac_addr_show, uwb_rc_mac_addr_store); + +/** Print @addr to @buf, @return bytes written */ +size_t __uwb_addr_print(char *buf, size_t buf_size, const unsigned char *addr, + int type) +{ + size_t result; + if (type) + result = scnprintf(buf, buf_size, + "%02x:%02x:%02x:%02x:%02x:%02x", + addr[0], addr[1], addr[2], + addr[3], addr[4], addr[5]); + else + result = scnprintf(buf, buf_size, "%02x:%02x", + addr[1], addr[0]); + return result; +} +EXPORT_SYMBOL_GPL(__uwb_addr_print); diff --git a/drivers/uwb/beacon.c b/drivers/uwb/beacon.c new file mode 100644 index 000000000000..46b18eec5026 --- /dev/null +++ b/drivers/uwb/beacon.c @@ -0,0 +1,642 @@ +/* + * Ultra Wide Band + * Beacon management + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/kdev_t.h> +#include "uwb-internal.h" + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +/** Start Beaconing command structure */ +struct uwb_rc_cmd_start_beacon { + struct uwb_rccb rccb; + __le16 wBPSTOffset; + u8 bChannelNumber; +} __attribute__((packed)); + + +static int uwb_rc_start_beacon(struct uwb_rc *rc, u16 bpst_offset, u8 channel) +{ + int result; + struct uwb_rc_cmd_start_beacon *cmd; + struct uwb_rc_evt_confirm reply; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + return -ENOMEM; + cmd->rccb.bCommandType = UWB_RC_CET_GENERAL; + cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_START_BEACON); + cmd->wBPSTOffset = cpu_to_le16(bpst_offset); + cmd->bChannelNumber = channel; + reply.rceb.bEventType = UWB_RC_CET_GENERAL; + reply.rceb.wEvent = UWB_RC_CMD_START_BEACON; + result = uwb_rc_cmd(rc, "START-BEACON", &cmd->rccb, sizeof(*cmd), + &reply.rceb, sizeof(reply)); + if (result < 0) + goto error_cmd; + if (reply.bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(&rc->uwb_dev.dev, + "START-BEACON: command execution failed: %s (%d)\n", + uwb_rc_strerror(reply.bResultCode), reply.bResultCode); + result = -EIO; + } +error_cmd: + kfree(cmd); + return result; +} + +static int uwb_rc_stop_beacon(struct uwb_rc *rc) +{ + int result; + struct uwb_rccb *cmd; + struct uwb_rc_evt_confirm reply; + + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + return -ENOMEM; + cmd->bCommandType = UWB_RC_CET_GENERAL; + cmd->wCommand = cpu_to_le16(UWB_RC_CMD_STOP_BEACON); + reply.rceb.bEventType = UWB_RC_CET_GENERAL; + reply.rceb.wEvent = UWB_RC_CMD_STOP_BEACON; + result = uwb_rc_cmd(rc, "STOP-BEACON", cmd, sizeof(*cmd), + &reply.rceb, sizeof(reply)); + if (result < 0) + goto error_cmd; + if (reply.bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(&rc->uwb_dev.dev, + "STOP-BEACON: command execution failed: %s (%d)\n", + uwb_rc_strerror(reply.bResultCode), reply.bResultCode); + result = -EIO; + } +error_cmd: + kfree(cmd); + return result; +} + +/* + * Start/stop beacons + * + * @rc: UWB Radio Controller to operate on + * @channel: UWB channel on which to beacon (WUSB[table + * 5-12]). If -1, stop beaconing. + * @bpst_offset: Beacon Period Start Time offset; FIXME-do zero + * + * According to WHCI 0.95 [4.13.6] the driver will only receive the RCEB + * of a SET IE command after the device sent the first beacon that includes + * the IEs specified in the SET IE command. So, after we start beaconing we + * check if there is anything in the IE cache and call the SET IE command + * if needed. + */ +int uwb_rc_beacon(struct uwb_rc *rc, int channel, unsigned bpst_offset) +{ + int result; + struct device *dev = &rc->uwb_dev.dev; + + mutex_lock(&rc->uwb_dev.mutex); + if (channel < 0) + channel = -1; + if (channel == -1) + result = uwb_rc_stop_beacon(rc); + else { + /* channel >= 0...dah */ + result = uwb_rc_start_beacon(rc, bpst_offset, channel); + if (result < 0) + goto out_up; + if (le16_to_cpu(rc->ies->wIELength) > 0) { + result = uwb_rc_set_ie(rc, rc->ies); + if (result < 0) { + dev_err(dev, "Cannot set new IE on device: " + "%d\n", result); + result = uwb_rc_stop_beacon(rc); + channel = -1; + bpst_offset = 0; + } else + result = 0; + } + } + + if (result < 0) + goto out_up; + rc->beaconing = channel; + + uwb_notify(rc, NULL, uwb_bg_joined(rc) ? UWB_NOTIF_BG_JOIN : UWB_NOTIF_BG_LEAVE); + +out_up: + mutex_unlock(&rc->uwb_dev.mutex); + return result; +} + +/* + * Beacon cache + * + * The purpose of this is to speed up the lookup of becon information + * when a new beacon arrives. The UWB Daemon uses it also to keep a + * tab of which devices are in radio distance and which not. When a + * device's beacon stays present for more than a certain amount of + * time, it is considered a new, usable device. When a beacon ceases + * to be received for a certain amount of time, it is considered that + * the device is gone. + * + * FIXME: use an allocator for the entries + * FIXME: use something faster for search than a list + */ + +struct uwb_beca uwb_beca = { + .list = LIST_HEAD_INIT(uwb_beca.list), + .mutex = __MUTEX_INITIALIZER(uwb_beca.mutex) +}; + + +void uwb_bce_kfree(struct kref *_bce) +{ + struct uwb_beca_e *bce = container_of(_bce, struct uwb_beca_e, refcnt); + + kfree(bce->be); + kfree(bce); +} + + +/* Find a beacon by dev addr in the cache */ +static +struct uwb_beca_e *__uwb_beca_find_bydev(const struct uwb_dev_addr *dev_addr) +{ + struct uwb_beca_e *bce, *next; + list_for_each_entry_safe(bce, next, &uwb_beca.list, node) { + d_printf(6, NULL, "looking for addr %02x:%02x in %02x:%02x\n", + dev_addr->data[0], dev_addr->data[1], + bce->dev_addr.data[0], bce->dev_addr.data[1]); + if (!memcmp(&bce->dev_addr, dev_addr, sizeof(bce->dev_addr))) + goto out; + } + bce = NULL; +out: + return bce; +} + +/* Find a beacon by dev addr in the cache */ +static +struct uwb_beca_e *__uwb_beca_find_bymac(const struct uwb_mac_addr *mac_addr) +{ + struct uwb_beca_e *bce, *next; + list_for_each_entry_safe(bce, next, &uwb_beca.list, node) { + if (!memcmp(bce->mac_addr, mac_addr->data, + sizeof(struct uwb_mac_addr))) + goto out; + } + bce = NULL; +out: + return bce; +} + +/** + * uwb_dev_get_by_devaddr - get a UWB device with a specific DevAddr + * @rc: the radio controller that saw the device + * @devaddr: DevAddr of the UWB device to find + * + * There may be more than one matching device (in the case of a + * DevAddr conflict), but only the first one is returned. + */ +struct uwb_dev *uwb_dev_get_by_devaddr(struct uwb_rc *rc, + const struct uwb_dev_addr *devaddr) +{ + struct uwb_dev *found = NULL; + struct uwb_beca_e *bce; + + mutex_lock(&uwb_beca.mutex); + bce = __uwb_beca_find_bydev(devaddr); + if (bce) + found = uwb_dev_try_get(rc, bce->uwb_dev); + mutex_unlock(&uwb_beca.mutex); + + return found; +} + +/** + * uwb_dev_get_by_macaddr - get a UWB device with a specific EUI-48 + * @rc: the radio controller that saw the device + * @devaddr: EUI-48 of the UWB device to find + */ +struct uwb_dev *uwb_dev_get_by_macaddr(struct uwb_rc *rc, + const struct uwb_mac_addr *macaddr) +{ + struct uwb_dev *found = NULL; + struct uwb_beca_e *bce; + + mutex_lock(&uwb_beca.mutex); + bce = __uwb_beca_find_bymac(macaddr); + if (bce) + found = uwb_dev_try_get(rc, bce->uwb_dev); + mutex_unlock(&uwb_beca.mutex); + + return found; +} + +/* Initialize a beacon cache entry */ +static void uwb_beca_e_init(struct uwb_beca_e *bce) +{ + mutex_init(&bce->mutex); + kref_init(&bce->refcnt); + stats_init(&bce->lqe_stats); + stats_init(&bce->rssi_stats); +} + +/* + * Add a beacon to the cache + * + * @be: Beacon event information + * @bf: Beacon frame (part of b, really) + * @ts_jiffies: Timestamp (in jiffies) when the beacon was received + */ +struct uwb_beca_e *__uwb_beca_add(struct uwb_rc_evt_beacon *be, + struct uwb_beacon_frame *bf, + unsigned long ts_jiffies) +{ + struct uwb_beca_e *bce; + + bce = kzalloc(sizeof(*bce), GFP_KERNEL); + if (bce == NULL) + return NULL; + uwb_beca_e_init(bce); + bce->ts_jiffies = ts_jiffies; + bce->uwb_dev = NULL; + list_add(&bce->node, &uwb_beca.list); + return bce; +} + +/* + * Wipe out beacon entries that became stale + * + * Remove associated devicest too. + */ +void uwb_beca_purge(void) +{ + struct uwb_beca_e *bce, *next; + unsigned long expires; + + mutex_lock(&uwb_beca.mutex); + list_for_each_entry_safe(bce, next, &uwb_beca.list, node) { + expires = bce->ts_jiffies + msecs_to_jiffies(beacon_timeout_ms); + if (time_after(jiffies, expires)) { + uwbd_dev_offair(bce); + list_del(&bce->node); + uwb_bce_put(bce); + } + } + mutex_unlock(&uwb_beca.mutex); +} + +/* Clean up the whole beacon cache. Called on shutdown */ +void uwb_beca_release(void) +{ + struct uwb_beca_e *bce, *next; + mutex_lock(&uwb_beca.mutex); + list_for_each_entry_safe(bce, next, &uwb_beca.list, node) { + list_del(&bce->node); + uwb_bce_put(bce); + } + mutex_unlock(&uwb_beca.mutex); +} + +static void uwb_beacon_print(struct uwb_rc *rc, struct uwb_rc_evt_beacon *be, + struct uwb_beacon_frame *bf) +{ + char macbuf[UWB_ADDR_STRSIZE]; + char devbuf[UWB_ADDR_STRSIZE]; + char dstbuf[UWB_ADDR_STRSIZE]; + + uwb_mac_addr_print(macbuf, sizeof(macbuf), &bf->Device_Identifier); + uwb_dev_addr_print(devbuf, sizeof(devbuf), &bf->hdr.SrcAddr); + uwb_dev_addr_print(dstbuf, sizeof(dstbuf), &bf->hdr.DestAddr); + dev_info(&rc->uwb_dev.dev, + "BEACON from %s to %s (ch%u offset %u slot %u MAC %s)\n", + devbuf, dstbuf, be->bChannelNumber, be->wBPSTOffset, + bf->Beacon_Slot_Number, macbuf); +} + +/* + * @bce: beacon cache entry, referenced + */ +ssize_t uwb_bce_print_IEs(struct uwb_dev *uwb_dev, struct uwb_beca_e *bce, + char *buf, size_t size) +{ + ssize_t result = 0; + struct uwb_rc_evt_beacon *be; + struct uwb_beacon_frame *bf; + struct uwb_buf_ctx ctx = { + .buf = buf, + .bytes = 0, + .size = size + }; + + mutex_lock(&bce->mutex); + be = bce->be; + if (be == NULL) + goto out; + bf = (void *) be->BeaconInfo; + uwb_ie_for_each(uwb_dev, uwb_ie_dump_hex, &ctx, + bf->IEData, be->wBeaconInfoLength - sizeof(*bf)); + result = ctx.bytes; +out: + mutex_unlock(&bce->mutex); + return result; +} + +/* + * Verify that the beacon event, frame and IEs are ok + */ +static int uwb_verify_beacon(struct uwb_rc *rc, struct uwb_event *evt, + struct uwb_rc_evt_beacon *be) +{ + int result = -EINVAL; + struct uwb_beacon_frame *bf; + struct device *dev = &rc->uwb_dev.dev; + + /* Is there enough data to decode a beacon frame? */ + if (evt->notif.size < sizeof(*be) + sizeof(*bf)) { + dev_err(dev, "BEACON event: Not enough data to decode " + "(%zu vs %zu bytes needed)\n", evt->notif.size, + sizeof(*be) + sizeof(*bf)); + goto error; + } + /* FIXME: make sure beacon frame IEs are fine and that the whole thing + * is consistent */ + result = 0; +error: + return result; +} + +/* + * Handle UWB_RC_EVT_BEACON events + * + * We check the beacon cache to see how the received beacon fares. If + * is there already we refresh the timestamp. If not we create a new + * entry. + * + * According to the WHCI and WUSB specs, only one beacon frame is + * allowed per notification block, so we don't bother about scanning + * for more. + */ +int uwbd_evt_handle_rc_beacon(struct uwb_event *evt) +{ + int result = -EINVAL; + struct uwb_rc *rc; + struct uwb_rc_evt_beacon *be; + struct uwb_beacon_frame *bf; + struct uwb_beca_e *bce; + unsigned long last_ts; + + rc = evt->rc; + be = container_of(evt->notif.rceb, struct uwb_rc_evt_beacon, rceb); + result = uwb_verify_beacon(rc, evt, be); + if (result < 0) + return result; + + /* FIXME: handle alien beacons. */ + if (be->bBeaconType == UWB_RC_BEACON_TYPE_OL_ALIEN || + be->bBeaconType == UWB_RC_BEACON_TYPE_NOL_ALIEN) { + return -ENOSYS; + } + + bf = (struct uwb_beacon_frame *) be->BeaconInfo; + + /* + * Drop beacons from devices with a NULL EUI-48 -- they cannot + * be uniquely identified. + * + * It's expected that these will all be WUSB devices and they + * have a WUSB specific connection method so ignoring them + * here shouldn't be a problem. + */ + if (uwb_mac_addr_bcast(&bf->Device_Identifier)) + return 0; + + mutex_lock(&uwb_beca.mutex); + bce = __uwb_beca_find_bymac(&bf->Device_Identifier); + if (bce == NULL) { + /* Not in there, a new device is pinging */ + uwb_beacon_print(evt->rc, be, bf); + bce = __uwb_beca_add(be, bf, evt->ts_jiffies); + if (bce == NULL) { + mutex_unlock(&uwb_beca.mutex); + return -ENOMEM; + } + } + mutex_unlock(&uwb_beca.mutex); + + mutex_lock(&bce->mutex); + /* purge old beacon data */ + kfree(bce->be); + + last_ts = bce->ts_jiffies; + + /* Update commonly used fields */ + bce->ts_jiffies = evt->ts_jiffies; + bce->be = be; + bce->dev_addr = bf->hdr.SrcAddr; + bce->mac_addr = &bf->Device_Identifier; + be->wBPSTOffset = le16_to_cpu(be->wBPSTOffset); + be->wBeaconInfoLength = le16_to_cpu(be->wBeaconInfoLength); + stats_add_sample(&bce->lqe_stats, be->bLQI - 7); + stats_add_sample(&bce->rssi_stats, be->bRSSI + 18); + + /* + * This might be a beacon from a new device. + */ + if (bce->uwb_dev == NULL) + uwbd_dev_onair(evt->rc, bce); + + mutex_unlock(&bce->mutex); + + return 1; /* we keep the event data */ +} + +/* + * Handle UWB_RC_EVT_BEACON_SIZE events + * + * XXXXX + */ +int uwbd_evt_handle_rc_beacon_size(struct uwb_event *evt) +{ + int result = -EINVAL; + struct device *dev = &evt->rc->uwb_dev.dev; + struct uwb_rc_evt_beacon_size *bs; + + /* Is there enough data to decode the event? */ + if (evt->notif.size < sizeof(*bs)) { + dev_err(dev, "BEACON SIZE notification: Not enough data to " + "decode (%zu vs %zu bytes needed)\n", + evt->notif.size, sizeof(*bs)); + goto error; + } + bs = container_of(evt->notif.rceb, struct uwb_rc_evt_beacon_size, rceb); + if (0) + dev_info(dev, "Beacon size changed to %u bytes " + "(FIXME: action?)\n", le16_to_cpu(bs->wNewBeaconSize)); + else { + /* temporary hack until we do something with this message... */ + static unsigned count; + if (++count % 1000 == 0) + dev_info(dev, "Beacon size changed %u times " + "(FIXME: action?)\n", count); + } + result = 0; +error: + return result; +} + +/** + * uwbd_evt_handle_rc_bp_slot_change - handle a BP_SLOT_CHANGE event + * @evt: the BP_SLOT_CHANGE notification from the radio controller + * + * If the event indicates that no beacon period slots were available + * then radio controller has transitioned to a non-beaconing state. + * Otherwise, simply save the current beacon slot. + */ +int uwbd_evt_handle_rc_bp_slot_change(struct uwb_event *evt) +{ + struct uwb_rc *rc = evt->rc; + struct device *dev = &rc->uwb_dev.dev; + struct uwb_rc_evt_bp_slot_change *bpsc; + + if (evt->notif.size < sizeof(*bpsc)) { + dev_err(dev, "BP SLOT CHANGE event: Not enough data\n"); + return -EINVAL; + } + bpsc = container_of(evt->notif.rceb, struct uwb_rc_evt_bp_slot_change, rceb); + + mutex_lock(&rc->uwb_dev.mutex); + if (uwb_rc_evt_bp_slot_change_no_slot(bpsc)) { + dev_info(dev, "stopped beaconing: No free slots in BP\n"); + rc->beaconing = -1; + } else + rc->uwb_dev.beacon_slot = uwb_rc_evt_bp_slot_change_slot_num(bpsc); + mutex_unlock(&rc->uwb_dev.mutex); + + return 0; +} + +/** + * Handle UWB_RC_EVT_BPOIE_CHANGE events + * + * XXXXX + */ +struct uwb_ie_bpo { + struct uwb_ie_hdr hdr; + u8 bp_length; + u8 data[]; +} __attribute__((packed)); + +int uwbd_evt_handle_rc_bpoie_change(struct uwb_event *evt) +{ + int result = -EINVAL; + struct device *dev = &evt->rc->uwb_dev.dev; + struct uwb_rc_evt_bpoie_change *bpoiec; + struct uwb_ie_bpo *bpoie; + static unsigned count; /* FIXME: this is a temp hack */ + size_t iesize; + + /* Is there enough data to decode it? */ + if (evt->notif.size < sizeof(*bpoiec)) { + dev_err(dev, "BPOIEC notification: Not enough data to " + "decode (%zu vs %zu bytes needed)\n", + evt->notif.size, sizeof(*bpoiec)); + goto error; + } + bpoiec = container_of(evt->notif.rceb, struct uwb_rc_evt_bpoie_change, rceb); + iesize = le16_to_cpu(bpoiec->wBPOIELength); + if (iesize < sizeof(*bpoie)) { + dev_err(dev, "BPOIEC notification: Not enough IE data to " + "decode (%zu vs %zu bytes needed)\n", + iesize, sizeof(*bpoie)); + goto error; + } + if (++count % 1000 == 0) /* Lame placeholder */ + dev_info(dev, "BPOIE: %u changes received\n", count); + /* + * FIXME: At this point we should go over all the IEs in the + * bpoiec->BPOIE array and act on each. + */ + result = 0; +error: + return result; +} + +/** + * uwb_bg_joined - is the RC in a beacon group? + * @rc: the radio controller + * + * Returns true if the radio controller is in a beacon group (even if + * it's the sole member). + */ +int uwb_bg_joined(struct uwb_rc *rc) +{ + return rc->beaconing != -1; +} +EXPORT_SYMBOL_GPL(uwb_bg_joined); + +/* + * Print beaconing state. + */ +static ssize_t uwb_rc_beacon_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_rc *rc = uwb_dev->rc; + ssize_t result; + + mutex_lock(&rc->uwb_dev.mutex); + result = sprintf(buf, "%d\n", rc->beaconing); + mutex_unlock(&rc->uwb_dev.mutex); + return result; +} + +/* + * Start beaconing on the specified channel, or stop beaconing. + * + * The BPST offset of when to start searching for a beacon group to + * join may be specified. + */ +static ssize_t uwb_rc_beacon_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_rc *rc = uwb_dev->rc; + int channel; + unsigned bpst_offset = 0; + ssize_t result = -EINVAL; + + result = sscanf(buf, "%d %u\n", &channel, &bpst_offset); + if (result >= 1) + result = uwb_rc_beacon(rc, channel, bpst_offset); + + return result < 0 ? result : size; +} +DEVICE_ATTR(beacon, S_IRUGO | S_IWUSR, uwb_rc_beacon_show, uwb_rc_beacon_store); diff --git a/drivers/uwb/driver.c b/drivers/uwb/driver.c new file mode 100644 index 000000000000..521cdeb84971 --- /dev/null +++ b/drivers/uwb/driver.c @@ -0,0 +1,144 @@ +/* + * Ultra Wide Band + * Driver initialization, etc + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + * + * Life cycle: FIXME: explain + * + * UWB radio controller: + * + * 1. alloc a uwb_rc, zero it + * 2. call uwb_rc_init() on it to set it up + ops (won't do any + * kind of allocation) + * 3. register (now it is owned by the UWB stack--deregister before + * freeing/destroying). + * 4. It lives on it's own now (UWB stack handles)--when it + * disconnects, call unregister() + * 5. free it. + * + * Make sure you have a reference to the uwb_rc before calling + * any of the UWB API functions. + * + * TODO: + * + * 1. Locking and life cycle management is crappy still. All entry + * points to the UWB HCD API assume you have a reference on the + * uwb_rc structure and that it won't go away. They mutex lock it + * before doing anything. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/kdev_t.h> +#include <linux/random.h> +#include <linux/uwb/debug.h> +#include "uwb-internal.h" + + +/* UWB stack attributes (or 'global' constants) */ + + +/** + * If a beacon dissapears for longer than this, then we consider the + * device who was represented by that beacon to be gone. + * + * ECMA-368[17.2.3, last para] establishes that a device must not + * consider a device to be its neighbour if he doesn't receive a beacon + * for more than mMaxLostBeacons. mMaxLostBeacons is defined in + * ECMA-368[17.16] as 3; because we can get only one beacon per + * superframe, that'd be 3 * 65ms = 195 ~ 200 ms. Let's give it time + * for jitter and stuff and make it 500 ms. + */ +unsigned long beacon_timeout_ms = 500; + +static +ssize_t beacon_timeout_ms_show(struct class *class, char *buf) +{ + return scnprintf(buf, PAGE_SIZE, "%lu\n", beacon_timeout_ms); +} + +static +ssize_t beacon_timeout_ms_store(struct class *class, + const char *buf, size_t size) +{ + unsigned long bt; + ssize_t result; + result = sscanf(buf, "%lu", &bt); + if (result != 1) + return -EINVAL; + beacon_timeout_ms = bt; + return size; +} + +static struct class_attribute uwb_class_attrs[] = { + __ATTR(beacon_timeout_ms, S_IWUSR | S_IRUGO, + beacon_timeout_ms_show, beacon_timeout_ms_store), + __ATTR_NULL, +}; + +/** Device model classes */ +struct class uwb_rc_class = { + .name = "uwb_rc", + .class_attrs = uwb_class_attrs, +}; + + +static int __init uwb_subsys_init(void) +{ + int result = 0; + + result = uwb_est_create(); + if (result < 0) { + printk(KERN_ERR "uwb: Can't initialize EST subsystem\n"); + goto error_est_init; + } + + result = class_register(&uwb_rc_class); + if (result < 0) + goto error_uwb_rc_class_register; + uwbd_start(); + uwb_dbg_init(); + return 0; + +error_uwb_rc_class_register: + uwb_est_destroy(); +error_est_init: + return result; +} +module_init(uwb_subsys_init); + +static void __exit uwb_subsys_exit(void) +{ + uwb_dbg_exit(); + uwbd_stop(); + class_unregister(&uwb_rc_class); + uwb_est_destroy(); + return; +} +module_exit(uwb_subsys_exit); + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("Ultra Wide Band core"); +MODULE_LICENSE("GPL"); diff --git a/drivers/uwb/drp-avail.c b/drivers/uwb/drp-avail.c new file mode 100644 index 000000000000..3febd8552808 --- /dev/null +++ b/drivers/uwb/drp-avail.c @@ -0,0 +1,288 @@ +/* + * Ultra Wide Band + * DRP availability management + * + * Copyright (C) 2005-2006 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * Copyright (C) 2008 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * + * Manage DRP Availability (the MAS available for DRP + * reservations). Thus: + * + * - Handle DRP Availability Change notifications + * + * - Allow the reservation manager to indicate MAS reserved/released + * by local (owned by/targeted at the radio controller) + * reservations. + * + * - Based on the two sources above, generate a DRP Availability IE to + * be included in the beacon. + * + * See also the documentation for struct uwb_drp_avail. + */ + +#include <linux/errno.h> +#include <linux/module.h> +#include <linux/device.h> +#include <linux/bitmap.h> +#include "uwb-internal.h" + +/** + * uwb_drp_avail_init - initialize an RC's MAS availability + * + * All MAS are available initially. The RC will inform use which + * slots are used for the BP (it may change in size). + */ +void uwb_drp_avail_init(struct uwb_rc *rc) +{ + bitmap_fill(rc->drp_avail.global, UWB_NUM_MAS); + bitmap_fill(rc->drp_avail.local, UWB_NUM_MAS); + bitmap_fill(rc->drp_avail.pending, UWB_NUM_MAS); +} + +/* + * Determine MAS available for new local reservations. + * + * avail = global & local & pending + */ +static void uwb_drp_available(struct uwb_rc *rc, struct uwb_mas_bm *avail) +{ + bitmap_and(avail->bm, rc->drp_avail.global, rc->drp_avail.local, UWB_NUM_MAS); + bitmap_and(avail->bm, avail->bm, rc->drp_avail.pending, UWB_NUM_MAS); +} + +/** + * uwb_drp_avail_reserve_pending - reserve MAS for a new reservation + * @rc: the radio controller + * @mas: the MAS to reserve + * + * Returns 0 on success, or -EBUSY if the MAS requested aren't available. + */ +int uwb_drp_avail_reserve_pending(struct uwb_rc *rc, struct uwb_mas_bm *mas) +{ + struct uwb_mas_bm avail; + + uwb_drp_available(rc, &avail); + if (!bitmap_subset(mas->bm, avail.bm, UWB_NUM_MAS)) + return -EBUSY; + + bitmap_andnot(rc->drp_avail.pending, rc->drp_avail.pending, mas->bm, UWB_NUM_MAS); + return 0; +} + +/** + * uwb_drp_avail_reserve - reserve MAS for an established reservation + * @rc: the radio controller + * @mas: the MAS to reserve + */ +void uwb_drp_avail_reserve(struct uwb_rc *rc, struct uwb_mas_bm *mas) +{ + bitmap_or(rc->drp_avail.pending, rc->drp_avail.pending, mas->bm, UWB_NUM_MAS); + bitmap_andnot(rc->drp_avail.local, rc->drp_avail.local, mas->bm, UWB_NUM_MAS); + rc->drp_avail.ie_valid = false; +} + +/** + * uwb_drp_avail_release - release MAS from a pending or established reservation + * @rc: the radio controller + * @mas: the MAS to release + */ +void uwb_drp_avail_release(struct uwb_rc *rc, struct uwb_mas_bm *mas) +{ + bitmap_or(rc->drp_avail.local, rc->drp_avail.local, mas->bm, UWB_NUM_MAS); + bitmap_or(rc->drp_avail.pending, rc->drp_avail.pending, mas->bm, UWB_NUM_MAS); + rc->drp_avail.ie_valid = false; +} + +/** + * uwb_drp_avail_ie_update - update the DRP Availability IE + * @rc: the radio controller + * + * avail = global & local + */ +void uwb_drp_avail_ie_update(struct uwb_rc *rc) +{ + struct uwb_mas_bm avail; + + bitmap_and(avail.bm, rc->drp_avail.global, rc->drp_avail.local, UWB_NUM_MAS); + + rc->drp_avail.ie.hdr.element_id = UWB_IE_DRP_AVAILABILITY; + rc->drp_avail.ie.hdr.length = UWB_NUM_MAS / 8; + uwb_mas_bm_copy_le(rc->drp_avail.ie.bmp, &avail); + rc->drp_avail.ie_valid = true; +} + +/** + * Create an unsigned long from a buffer containing a byte stream. + * + * @array: pointer to buffer + * @itr: index of buffer from where we start + * @len: the buffer's remaining size may not be exact multiple of + * sizeof(unsigned long), @len is the length of buffer that needs + * to be converted. This will be sizeof(unsigned long) or smaller + * (BUG if not). If it is smaller then we will pad the remaining + * space of the result with zeroes. + */ +static +unsigned long get_val(u8 *array, size_t itr, size_t len) +{ + unsigned long val = 0; + size_t top = itr + len; + + BUG_ON(len > sizeof(val)); + + while (itr < top) { + val <<= 8; + val |= array[top - 1]; + top--; + } + val <<= 8 * (sizeof(val) - len); /* padding */ + return val; +} + +/** + * Initialize bitmap from data buffer. + * + * The bitmap to be converted could come from a IE, for example a + * DRP Availability IE. + * From ECMA-368 1.0 [16.8.7]: " + * octets: 1 1 N * (0 to 32) + * Element ID Length (=N) DRP Availability Bitmap + * + * The DRP Availability Bitmap field is up to 256 bits long, one + * bit for each MAS in the superframe, where the least-significant + * bit of the field corresponds to the first MAS in the superframe + * and successive bits correspond to successive MASs." + * + * The DRP Availability bitmap is in octets from 0 to 32, so octet + * 32 contains bits for MAS 1-8, etc. If the bitmap is smaller than 32 + * octets, the bits in octets not included at the end of the bitmap are + * treated as zero. In this case (when the bitmap is smaller than 32 + * octets) the MAS represented range from MAS 1 to MAS (size of bitmap) + * with the last octet still containing bits for MAS 1-8, etc. + * + * For example: + * F00F0102 03040506 0708090A 0B0C0D0E 0F010203 + * ^^^^ + * |||| + * |||| + * |||\LSB of byte is MAS 9 + * ||\MSB of byte is MAS 16 + * |\LSB of first byte is MAS 1 + * \ MSB of byte is MAS 8 + * + * An example of this encoding can be found in ECMA-368 Annex-D [Table D.11] + * + * The resulting bitmap will have the following mapping: + * bit position 0 == MAS 1 + * bit position 1 == MAS 2 + * ... + * bit position (UWB_NUM_MAS - 1) == MAS UWB_NUM_MAS + * + * @bmp_itr: pointer to bitmap (can be declared with DECLARE_BITMAP) + * @buffer: pointer to buffer containing bitmap data in big endian + * format (MSB first) + * @buffer_size:number of bytes with which bitmap should be initialized + */ +static +void buffer_to_bmp(unsigned long *bmp_itr, void *_buffer, + size_t buffer_size) +{ + u8 *buffer = _buffer; + size_t itr, len; + unsigned long val; + + itr = 0; + while (itr < buffer_size) { + len = buffer_size - itr >= sizeof(val) ? + sizeof(val) : buffer_size - itr; + val = get_val(buffer, itr, len); + bmp_itr[itr / sizeof(val)] = val; + itr += sizeof(val); + } +} + + +/** + * Extract DRP Availability bitmap from the notification. + * + * The notification that comes in contains a bitmap of (UWB_NUM_MAS / 8) bytes + * We convert that to our internal representation. + */ +static +int uwbd_evt_get_drp_avail(struct uwb_event *evt, unsigned long *bmp) +{ + struct device *dev = &evt->rc->uwb_dev.dev; + struct uwb_rc_evt_drp_avail *drp_evt; + int result = -EINVAL; + + /* Is there enough data to decode the event? */ + if (evt->notif.size < sizeof(*drp_evt)) { + dev_err(dev, "DRP Availability Change: Not enough " + "data to decode event [%zu bytes, %zu " + "needed]\n", evt->notif.size, sizeof(*drp_evt)); + goto error; + } + drp_evt = container_of(evt->notif.rceb, struct uwb_rc_evt_drp_avail, rceb); + buffer_to_bmp(bmp, drp_evt->bmp, UWB_NUM_MAS/8); + result = 0; +error: + return result; +} + + +/** + * Process an incoming DRP Availability notification. + * + * @evt: Event information (packs the actual event data, which + * radio controller it came to, etc). + * + * @returns: 0 on success (so uwbd() frees the event buffer), < 0 + * on error. + * + * According to ECMA-368 1.0 [16.8.7], bits set to ONE indicate that + * the MAS slot is available, bits set to ZERO indicate that the slot + * is busy. + * + * So we clear available slots, we set used slots :) + * + * The notification only marks non-availability based on the BP and + * received DRP IEs that are not for this radio controller. A copy of + * this bitmap is needed to generate the real availability (which + * includes local and pending reservations). + * + * The DRP Availability IE that this radio controller emits will need + * to be updated. + */ +int uwbd_evt_handle_rc_drp_avail(struct uwb_event *evt) +{ + int result; + struct uwb_rc *rc = evt->rc; + DECLARE_BITMAP(bmp, UWB_NUM_MAS); + + result = uwbd_evt_get_drp_avail(evt, bmp); + if (result < 0) + return result; + + mutex_lock(&rc->rsvs_mutex); + bitmap_copy(rc->drp_avail.global, bmp, UWB_NUM_MAS); + rc->drp_avail.ie_valid = false; + mutex_unlock(&rc->rsvs_mutex); + + uwb_rsv_sched_update(rc); + + return 0; +} diff --git a/drivers/uwb/drp-ie.c b/drivers/uwb/drp-ie.c new file mode 100644 index 000000000000..882724c5f126 --- /dev/null +++ b/drivers/uwb/drp-ie.c @@ -0,0 +1,232 @@ +/* + * UWB DRP IE management. + * + * Copyright (C) 2005-2006 Intel Corporation + * Copyright (C) 2008 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/random.h> +#include <linux/uwb.h> + +#include "uwb-internal.h" + +/* + * Allocate a DRP IE. + * + * To save having to free/allocate a DRP IE when its MAS changes, + * enough memory is allocated for the maxiumum number of DRP + * allocation fields. This gives an overhead per reservation of up to + * (UWB_NUM_ZONES - 1) * 4 = 60 octets. + */ +static struct uwb_ie_drp *uwb_drp_ie_alloc(void) +{ + struct uwb_ie_drp *drp_ie; + unsigned tiebreaker; + + drp_ie = kzalloc(sizeof(struct uwb_ie_drp) + + UWB_NUM_ZONES * sizeof(struct uwb_drp_alloc), + GFP_KERNEL); + if (drp_ie) { + drp_ie->hdr.element_id = UWB_IE_DRP; + + get_random_bytes(&tiebreaker, sizeof(unsigned)); + uwb_ie_drp_set_tiebreaker(drp_ie, tiebreaker & 1); + } + return drp_ie; +} + + +/* + * Fill a DRP IE's allocation fields from a MAS bitmap. + */ +static void uwb_drp_ie_from_bm(struct uwb_ie_drp *drp_ie, + struct uwb_mas_bm *mas) +{ + int z, i, num_fields = 0, next = 0; + struct uwb_drp_alloc *zones; + __le16 current_bmp; + DECLARE_BITMAP(tmp_bmp, UWB_NUM_MAS); + DECLARE_BITMAP(tmp_mas_bm, UWB_MAS_PER_ZONE); + + zones = drp_ie->allocs; + + bitmap_copy(tmp_bmp, mas->bm, UWB_NUM_MAS); + + /* Determine unique MAS bitmaps in zones from bitmap. */ + for (z = 0; z < UWB_NUM_ZONES; z++) { + bitmap_copy(tmp_mas_bm, tmp_bmp, UWB_MAS_PER_ZONE); + if (bitmap_weight(tmp_mas_bm, UWB_MAS_PER_ZONE) > 0) { + bool found = false; + current_bmp = (__le16) *tmp_mas_bm; + for (i = 0; i < next; i++) { + if (current_bmp == zones[i].mas_bm) { + zones[i].zone_bm |= 1 << z; + found = true; + break; + } + } + if (!found) { + num_fields++; + zones[next].zone_bm = 1 << z; + zones[next].mas_bm = current_bmp; + next++; + } + } + bitmap_shift_right(tmp_bmp, tmp_bmp, UWB_MAS_PER_ZONE, UWB_NUM_MAS); + } + + /* Store in format ready for transmission (le16). */ + for (i = 0; i < num_fields; i++) { + drp_ie->allocs[i].zone_bm = cpu_to_le16(zones[i].zone_bm); + drp_ie->allocs[i].mas_bm = cpu_to_le16(zones[i].mas_bm); + } + + drp_ie->hdr.length = sizeof(struct uwb_ie_drp) - sizeof(struct uwb_ie_hdr) + + num_fields * sizeof(struct uwb_drp_alloc); +} + +/** + * uwb_drp_ie_update - update a reservation's DRP IE + * @rsv: the reservation + */ +int uwb_drp_ie_update(struct uwb_rsv *rsv) +{ + struct device *dev = &rsv->rc->uwb_dev.dev; + struct uwb_ie_drp *drp_ie; + int reason_code, status; + + switch (rsv->state) { + case UWB_RSV_STATE_NONE: + kfree(rsv->drp_ie); + rsv->drp_ie = NULL; + return 0; + case UWB_RSV_STATE_O_INITIATED: + reason_code = UWB_DRP_REASON_ACCEPTED; + status = 0; + break; + case UWB_RSV_STATE_O_PENDING: + reason_code = UWB_DRP_REASON_ACCEPTED; + status = 0; + break; + case UWB_RSV_STATE_O_MODIFIED: + reason_code = UWB_DRP_REASON_MODIFIED; + status = 1; + break; + case UWB_RSV_STATE_O_ESTABLISHED: + reason_code = UWB_DRP_REASON_ACCEPTED; + status = 1; + break; + case UWB_RSV_STATE_T_ACCEPTED: + reason_code = UWB_DRP_REASON_ACCEPTED; + status = 1; + break; + case UWB_RSV_STATE_T_DENIED: + reason_code = UWB_DRP_REASON_DENIED; + status = 0; + break; + default: + dev_dbg(dev, "rsv with unhandled state (%d)\n", rsv->state); + return -EINVAL; + } + + if (rsv->drp_ie == NULL) { + rsv->drp_ie = uwb_drp_ie_alloc(); + if (rsv->drp_ie == NULL) + return -ENOMEM; + } + drp_ie = rsv->drp_ie; + + uwb_ie_drp_set_owner(drp_ie, uwb_rsv_is_owner(rsv)); + uwb_ie_drp_set_status(drp_ie, status); + uwb_ie_drp_set_reason_code(drp_ie, reason_code); + uwb_ie_drp_set_stream_index(drp_ie, rsv->stream); + uwb_ie_drp_set_type(drp_ie, rsv->type); + + if (uwb_rsv_is_owner(rsv)) { + switch (rsv->target.type) { + case UWB_RSV_TARGET_DEV: + drp_ie->dev_addr = rsv->target.dev->dev_addr; + break; + case UWB_RSV_TARGET_DEVADDR: + drp_ie->dev_addr = rsv->target.devaddr; + break; + } + } else + drp_ie->dev_addr = rsv->owner->dev_addr; + + uwb_drp_ie_from_bm(drp_ie, &rsv->mas); + + rsv->ie_valid = true; + return 0; +} + +/* + * Set MAS bits from given MAS bitmap in a single zone of large bitmap. + * + * We are given a zone id and the MAS bitmap of bits that need to be set in + * this zone. Note that this zone may already have bits set and this only + * adds settings - we cannot simply assign the MAS bitmap contents to the + * zone contents. We iterate over the the bits (MAS) in the zone and set the + * bits that are set in the given MAS bitmap. + */ +static +void uwb_drp_ie_single_zone_to_bm(struct uwb_mas_bm *bm, u8 zone, u16 mas_bm) +{ + int mas; + u16 mas_mask; + + for (mas = 0; mas < UWB_MAS_PER_ZONE; mas++) { + mas_mask = 1 << mas; + if (mas_bm & mas_mask) + set_bit(zone * UWB_NUM_ZONES + mas, bm->bm); + } +} + +/** + * uwb_drp_ie_zones_to_bm - convert DRP allocation fields to a bitmap + * @mas: MAS bitmap that will be populated to correspond to the + * allocation fields in the DRP IE + * @drp_ie: the DRP IE that contains the allocation fields. + * + * The input format is an array of MAS allocation fields (16 bit Zone + * bitmap, 16 bit MAS bitmap) as described in [ECMA-368] section + * 16.8.6. The output is a full 256 bit MAS bitmap. + * + * We go over all the allocation fields, for each allocation field we + * know which zones are impacted. We iterate over all the zones + * impacted and call a function that will set the correct MAS bits in + * each zone. + */ +void uwb_drp_ie_to_bm(struct uwb_mas_bm *bm, const struct uwb_ie_drp *drp_ie) +{ + int numallocs = (drp_ie->hdr.length - 4) / 4; + const struct uwb_drp_alloc *alloc; + int cnt; + u16 zone_bm, mas_bm; + u8 zone; + u16 zone_mask; + + for (cnt = 0; cnt < numallocs; cnt++) { + alloc = &drp_ie->allocs[cnt]; + zone_bm = le16_to_cpu(alloc->zone_bm); + mas_bm = le16_to_cpu(alloc->mas_bm); + for (zone = 0; zone < UWB_NUM_ZONES; zone++) { + zone_mask = 1 << zone; + if (zone_bm & zone_mask) + uwb_drp_ie_single_zone_to_bm(bm, zone, mas_bm); + } + } +} diff --git a/drivers/uwb/drp.c b/drivers/uwb/drp.c new file mode 100644 index 000000000000..c0b1e5e2bd08 --- /dev/null +++ b/drivers/uwb/drp.c @@ -0,0 +1,461 @@ +/* + * Ultra Wide Band + * Dynamic Reservation Protocol handling + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * Copyright (C) 2008 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kthread.h> +#include <linux/freezer.h> +#include <linux/delay.h> +#include "uwb-internal.h" + +/** + * Construct and send the SET DRP IE + * + * @rc: UWB Host controller + * @returns: >= 0 number of bytes still available in the beacon + * < 0 errno code on error. + * + * See WUSB[8.6.2.7]: The host must set all the DRP IEs that it wants the + * device to include in its beacon at the same time. We thus have to + * traverse all reservations and include the DRP IEs of all PENDING + * and NEGOTIATED reservations in a SET DRP command for transmission. + * + * A DRP Availability IE is appended. + * + * rc->uwb_dev.mutex is held + * + * FIXME We currently ignore the returned value indicating the remaining space + * in beacon. This could be used to deny reservation requests earlier if + * determined that they would cause the beacon space to be exceeded. + */ +static +int uwb_rc_gen_send_drp_ie(struct uwb_rc *rc) +{ + int result; + struct device *dev = &rc->uwb_dev.dev; + struct uwb_rc_cmd_set_drp_ie *cmd; + struct uwb_rc_evt_set_drp_ie reply; + struct uwb_rsv *rsv; + int num_bytes = 0; + u8 *IEDataptr; + + result = -ENOMEM; + /* First traverse all reservations to determine memory needed. */ + list_for_each_entry(rsv, &rc->reservations, rc_node) { + if (rsv->drp_ie != NULL) + num_bytes += rsv->drp_ie->hdr.length + 2; + } + num_bytes += sizeof(rc->drp_avail.ie); + cmd = kzalloc(sizeof(*cmd) + num_bytes, GFP_KERNEL); + if (cmd == NULL) + goto error; + cmd->rccb.bCommandType = UWB_RC_CET_GENERAL; + cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_SET_DRP_IE); + cmd->wIELength = num_bytes; + IEDataptr = (u8 *)&cmd->IEData[0]; + + /* Next traverse all reservations to place IEs in allocated memory. */ + list_for_each_entry(rsv, &rc->reservations, rc_node) { + if (rsv->drp_ie != NULL) { + memcpy(IEDataptr, rsv->drp_ie, + rsv->drp_ie->hdr.length + 2); + IEDataptr += rsv->drp_ie->hdr.length + 2; + } + } + memcpy(IEDataptr, &rc->drp_avail.ie, sizeof(rc->drp_avail.ie)); + + reply.rceb.bEventType = UWB_RC_CET_GENERAL; + reply.rceb.wEvent = UWB_RC_CMD_SET_DRP_IE; + result = uwb_rc_cmd(rc, "SET-DRP-IE", &cmd->rccb, + sizeof(*cmd) + num_bytes, &reply.rceb, + sizeof(reply)); + if (result < 0) + goto error_cmd; + result = le16_to_cpu(reply.wRemainingSpace); + if (reply.bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(&rc->uwb_dev.dev, "SET-DRP-IE: command execution " + "failed: %s (%d). RemainingSpace in beacon " + "= %d\n", uwb_rc_strerror(reply.bResultCode), + reply.bResultCode, result); + result = -EIO; + } else { + dev_dbg(dev, "SET-DRP-IE sent. RemainingSpace in beacon " + "= %d.\n", result); + result = 0; + } +error_cmd: + kfree(cmd); +error: + return result; + +} +/** + * Send all DRP IEs associated with this host + * + * @returns: >= 0 number of bytes still available in the beacon + * < 0 errno code on error. + * + * As per the protocol we obtain the host controller device lock to access + * bandwidth structures. + */ +int uwb_rc_send_all_drp_ie(struct uwb_rc *rc) +{ + int result; + + mutex_lock(&rc->uwb_dev.mutex); + result = uwb_rc_gen_send_drp_ie(rc); + mutex_unlock(&rc->uwb_dev.mutex); + return result; +} + +void uwb_drp_handle_timeout(struct uwb_rsv *rsv) +{ + struct device *dev = &rsv->rc->uwb_dev.dev; + + dev_dbg(dev, "reservation timeout in state %s (%d)\n", + uwb_rsv_state_str(rsv->state), rsv->state); + + switch (rsv->state) { + case UWB_RSV_STATE_O_INITIATED: + if (rsv->is_multicast) { + uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED); + return; + } + break; + case UWB_RSV_STATE_O_ESTABLISHED: + if (rsv->is_multicast) + return; + break; + default: + break; + } + uwb_rsv_remove(rsv); +} + +/* + * Based on the DRP IE, transition a target reservation to a new + * state. + */ +static void uwb_drp_process_target(struct uwb_rc *rc, struct uwb_rsv *rsv, + struct uwb_ie_drp *drp_ie) +{ + struct device *dev = &rc->uwb_dev.dev; + int status; + enum uwb_drp_reason reason_code; + + status = uwb_ie_drp_status(drp_ie); + reason_code = uwb_ie_drp_reason_code(drp_ie); + + if (status) { + switch (reason_code) { + case UWB_DRP_REASON_ACCEPTED: + uwb_rsv_set_state(rsv, UWB_RSV_STATE_T_ACCEPTED); + break; + case UWB_DRP_REASON_MODIFIED: + dev_err(dev, "FIXME: unhandled reason code (%d/%d)\n", + reason_code, status); + break; + default: + dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n", + reason_code, status); + } + } else { + switch (reason_code) { + case UWB_DRP_REASON_ACCEPTED: + /* New reservations are handled in uwb_rsv_find(). */ + break; + case UWB_DRP_REASON_DENIED: + uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE); + break; + case UWB_DRP_REASON_CONFLICT: + case UWB_DRP_REASON_MODIFIED: + dev_err(dev, "FIXME: unhandled reason code (%d/%d)\n", + reason_code, status); + break; + default: + dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n", + reason_code, status); + } + } +} + +/* + * Based on the DRP IE, transition an owner reservation to a new + * state. + */ +static void uwb_drp_process_owner(struct uwb_rc *rc, struct uwb_rsv *rsv, + struct uwb_ie_drp *drp_ie) +{ + struct device *dev = &rc->uwb_dev.dev; + int status; + enum uwb_drp_reason reason_code; + + status = uwb_ie_drp_status(drp_ie); + reason_code = uwb_ie_drp_reason_code(drp_ie); + + if (status) { + switch (reason_code) { + case UWB_DRP_REASON_ACCEPTED: + uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_ESTABLISHED); + break; + case UWB_DRP_REASON_MODIFIED: + dev_err(dev, "FIXME: unhandled reason code (%d/%d)\n", + reason_code, status); + break; + default: + dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n", + reason_code, status); + } + } else { + switch (reason_code) { + case UWB_DRP_REASON_PENDING: + uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_PENDING); + break; + case UWB_DRP_REASON_DENIED: + uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE); + break; + case UWB_DRP_REASON_CONFLICT: + case UWB_DRP_REASON_MODIFIED: + dev_err(dev, "FIXME: unhandled reason code (%d/%d)\n", + reason_code, status); + break; + default: + dev_warn(dev, "ignoring invalid DRP IE state (%d/%d)\n", + reason_code, status); + } + } +} + +/* + * Process a received DRP IE, it's either for a reservation owned by + * the RC or targeted at it (or it's for a WUSB cluster reservation). + */ +static void uwb_drp_process(struct uwb_rc *rc, struct uwb_dev *src, + struct uwb_ie_drp *drp_ie) +{ + struct uwb_rsv *rsv; + + rsv = uwb_rsv_find(rc, src, drp_ie); + if (!rsv) { + /* + * No reservation? It's either for a recently + * terminated reservation; or the DRP IE couldn't be + * processed (e.g., an invalid IE or out of memory). + */ + return; + } + + /* + * Do nothing with DRP IEs for reservations that have been + * terminated. + */ + if (rsv->state == UWB_RSV_STATE_NONE) { + uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE); + return; + } + + if (uwb_ie_drp_owner(drp_ie)) + uwb_drp_process_target(rc, rsv, drp_ie); + else + uwb_drp_process_owner(rc, rsv, drp_ie); +} + + +/* + * Process all the DRP IEs (both DRP IEs and the DRP Availability IE) + * from a device. + */ +static +void uwb_drp_process_all(struct uwb_rc *rc, struct uwb_rc_evt_drp *drp_evt, + size_t ielen, struct uwb_dev *src_dev) +{ + struct device *dev = &rc->uwb_dev.dev; + struct uwb_ie_hdr *ie_hdr; + void *ptr; + + ptr = drp_evt->ie_data; + for (;;) { + ie_hdr = uwb_ie_next(&ptr, &ielen); + if (!ie_hdr) + break; + + switch (ie_hdr->element_id) { + case UWB_IE_DRP_AVAILABILITY: + /* FIXME: does something need to be done with this? */ + break; + case UWB_IE_DRP: + uwb_drp_process(rc, src_dev, (struct uwb_ie_drp *)ie_hdr); + break; + default: + dev_warn(dev, "unexpected IE in DRP notification\n"); + break; + } + } + + if (ielen > 0) + dev_warn(dev, "%d octets remaining in DRP notification\n", + (int)ielen); +} + + +/* + * Go through all the DRP IEs and find the ones that conflict with our + * reservations. + * + * FIXME: must resolve the conflict according the the rules in + * [ECMA-368]. + */ +static +void uwb_drp_process_conflict_all(struct uwb_rc *rc, struct uwb_rc_evt_drp *drp_evt, + size_t ielen, struct uwb_dev *src_dev) +{ + struct device *dev = &rc->uwb_dev.dev; + struct uwb_ie_hdr *ie_hdr; + struct uwb_ie_drp *drp_ie; + void *ptr; + + ptr = drp_evt->ie_data; + for (;;) { + ie_hdr = uwb_ie_next(&ptr, &ielen); + if (!ie_hdr) + break; + + drp_ie = container_of(ie_hdr, struct uwb_ie_drp, hdr); + + /* FIXME: check if this DRP IE conflicts. */ + } + + if (ielen > 0) + dev_warn(dev, "%d octets remaining in DRP notification\n", + (int)ielen); +} + + +/* + * Terminate all reservations owned by, or targeted at, 'uwb_dev'. + */ +static void uwb_drp_terminate_all(struct uwb_rc *rc, struct uwb_dev *uwb_dev) +{ + struct uwb_rsv *rsv; + + list_for_each_entry(rsv, &rc->reservations, rc_node) { + if (rsv->owner == uwb_dev + || (rsv->target.type == UWB_RSV_TARGET_DEV && rsv->target.dev == uwb_dev)) + uwb_rsv_remove(rsv); + } +} + + +/** + * uwbd_evt_handle_rc_drp - handle a DRP_IE event + * @evt: the DRP_IE event from the radio controller + * + * This processes DRP notifications from the radio controller, either + * initiating a new reservation or transitioning an existing + * reservation into a different state. + * + * DRP notifications can occur for three different reasons: + * + * - UWB_DRP_NOTIF_DRP_IE_RECVD: one or more DRP IEs with the RC as + * the target or source have been recieved. + * + * These DRP IEs could be new or for an existing reservation. + * + * If the DRP IE for an existing reservation ceases to be to + * recieved for at least mMaxLostBeacons, the reservation should be + * considered to be terminated. Note that the TERMINATE reason (see + * below) may not always be signalled (e.g., the remote device has + * two or more reservations established with the RC). + * + * - UWB_DRP_NOTIF_CONFLICT: DRP IEs from any device in the beacon + * group conflict with the RC's reservations. + * + * - UWB_DRP_NOTIF_TERMINATE: DRP IEs are no longer being received + * from a device (i.e., it's terminated all reservations). + * + * Only the software state of the reservations is changed; the setting + * of the radio controller's DRP IEs is done after all the events in + * an event buffer are processed. This saves waiting multiple times + * for the SET_DRP_IE command to complete. + */ +int uwbd_evt_handle_rc_drp(struct uwb_event *evt) +{ + struct device *dev = &evt->rc->uwb_dev.dev; + struct uwb_rc *rc = evt->rc; + struct uwb_rc_evt_drp *drp_evt; + size_t ielength, bytes_left; + struct uwb_dev_addr src_addr; + struct uwb_dev *src_dev; + int reason; + + /* Is there enough data to decode the event (and any IEs in + its payload)? */ + if (evt->notif.size < sizeof(*drp_evt)) { + dev_err(dev, "DRP event: Not enough data to decode event " + "[%zu bytes left, %zu needed]\n", + evt->notif.size, sizeof(*drp_evt)); + return 0; + } + bytes_left = evt->notif.size - sizeof(*drp_evt); + drp_evt = container_of(evt->notif.rceb, struct uwb_rc_evt_drp, rceb); + ielength = le16_to_cpu(drp_evt->ie_length); + if (bytes_left != ielength) { + dev_err(dev, "DRP event: Not enough data in payload [%zu" + "bytes left, %zu declared in the event]\n", + bytes_left, ielength); + return 0; + } + + memcpy(src_addr.data, &drp_evt->src_addr, sizeof(src_addr)); + src_dev = uwb_dev_get_by_devaddr(rc, &src_addr); + if (!src_dev) { + /* + * A DRP notification from an unrecognized device. + * + * This is probably from a WUSB device that doesn't + * have an EUI-48 and therefore doesn't show up in the + * UWB device database. It's safe to simply ignore + * these. + */ + return 0; + } + + mutex_lock(&rc->rsvs_mutex); + + reason = uwb_rc_evt_drp_reason(drp_evt); + + switch (reason) { + case UWB_DRP_NOTIF_DRP_IE_RCVD: + uwb_drp_process_all(rc, drp_evt, ielength, src_dev); + break; + case UWB_DRP_NOTIF_CONFLICT: + uwb_drp_process_conflict_all(rc, drp_evt, ielength, src_dev); + break; + case UWB_DRP_NOTIF_TERMINATE: + uwb_drp_terminate_all(rc, src_dev); + break; + default: + dev_warn(dev, "ignored DRP event with reason code: %d\n", reason); + break; + } + + mutex_unlock(&rc->rsvs_mutex); + + uwb_dev_put(src_dev); + return 0; +} diff --git a/drivers/uwb/est.c b/drivers/uwb/est.c new file mode 100644 index 000000000000..5fe566b7c845 --- /dev/null +++ b/drivers/uwb/est.c @@ -0,0 +1,477 @@ +/* + * Ultra Wide Band Radio Control + * Event Size Tables management + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + * + * Infrastructure, code and data tables for guessing the size of + * events received on the notification endpoints of UWB radio + * controllers. + * + * You define a table of events and for each, its size and how to get + * the extra size. + * + * ENTRY POINTS: + * + * uwb_est_{init/destroy}(): To initialize/release the EST subsystem. + * + * uwb_est_[u]register(): To un/register event size tables + * uwb_est_grow() + * + * uwb_est_find_size(): Get the size of an event + * uwb_est_get_size() + */ +#include <linux/spinlock.h> +#define D_LOCAL 0 +#include <linux/uwb/debug.h> +#include "uwb-internal.h" + + +struct uwb_est { + u16 type_event_high; + u16 vendor, product; + u8 entries; + const struct uwb_est_entry *entry; +}; + + +static struct uwb_est *uwb_est; +static u8 uwb_est_size; +static u8 uwb_est_used; +static DEFINE_RWLOCK(uwb_est_lock); + +/** + * WUSB Standard Event Size Table, HWA-RC interface + * + * Sizes for events and notifications type 0 (general), high nibble 0. + */ +static +struct uwb_est_entry uwb_est_00_00xx[] = { + [UWB_RC_EVT_IE_RCV] = { + .size = sizeof(struct uwb_rc_evt_ie_rcv), + .offset = 1 + offsetof(struct uwb_rc_evt_ie_rcv, wIELength), + }, + [UWB_RC_EVT_BEACON] = { + .size = sizeof(struct uwb_rc_evt_beacon), + .offset = 1 + offsetof(struct uwb_rc_evt_beacon, wBeaconInfoLength), + }, + [UWB_RC_EVT_BEACON_SIZE] = { + .size = sizeof(struct uwb_rc_evt_beacon_size), + }, + [UWB_RC_EVT_BPOIE_CHANGE] = { + .size = sizeof(struct uwb_rc_evt_bpoie_change), + .offset = 1 + offsetof(struct uwb_rc_evt_bpoie_change, + wBPOIELength), + }, + [UWB_RC_EVT_BP_SLOT_CHANGE] = { + .size = sizeof(struct uwb_rc_evt_bp_slot_change), + }, + [UWB_RC_EVT_BP_SWITCH_IE_RCV] = { + .size = sizeof(struct uwb_rc_evt_bp_switch_ie_rcv), + .offset = 1 + offsetof(struct uwb_rc_evt_bp_switch_ie_rcv, wIELength), + }, + [UWB_RC_EVT_DEV_ADDR_CONFLICT] = { + .size = sizeof(struct uwb_rc_evt_dev_addr_conflict), + }, + [UWB_RC_EVT_DRP_AVAIL] = { + .size = sizeof(struct uwb_rc_evt_drp_avail) + }, + [UWB_RC_EVT_DRP] = { + .size = sizeof(struct uwb_rc_evt_drp), + .offset = 1 + offsetof(struct uwb_rc_evt_drp, ie_length), + }, + [UWB_RC_EVT_BP_SWITCH_STATUS] = { + .size = sizeof(struct uwb_rc_evt_bp_switch_status), + }, + [UWB_RC_EVT_CMD_FRAME_RCV] = { + .size = sizeof(struct uwb_rc_evt_cmd_frame_rcv), + .offset = 1 + offsetof(struct uwb_rc_evt_cmd_frame_rcv, dataLength), + }, + [UWB_RC_EVT_CHANNEL_CHANGE_IE_RCV] = { + .size = sizeof(struct uwb_rc_evt_channel_change_ie_rcv), + .offset = 1 + offsetof(struct uwb_rc_evt_channel_change_ie_rcv, wIELength), + }, + [UWB_RC_CMD_CHANNEL_CHANGE] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, + [UWB_RC_CMD_DEV_ADDR_MGMT] = { + .size = sizeof(struct uwb_rc_evt_dev_addr_mgmt) }, + [UWB_RC_CMD_GET_IE] = { + .size = sizeof(struct uwb_rc_evt_get_ie), + .offset = 1 + offsetof(struct uwb_rc_evt_get_ie, wIELength), + }, + [UWB_RC_CMD_RESET] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, + [UWB_RC_CMD_SCAN] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, + [UWB_RC_CMD_SET_BEACON_FILTER] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, + [UWB_RC_CMD_SET_DRP_IE] = { + .size = sizeof(struct uwb_rc_evt_set_drp_ie), + }, + [UWB_RC_CMD_SET_IE] = { + .size = sizeof(struct uwb_rc_evt_set_ie), + }, + [UWB_RC_CMD_SET_NOTIFICATION_FILTER] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, + [UWB_RC_CMD_SET_TX_POWER] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, + [UWB_RC_CMD_SLEEP] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, + [UWB_RC_CMD_START_BEACON] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, + [UWB_RC_CMD_STOP_BEACON] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, + [UWB_RC_CMD_BP_MERGE] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, + [UWB_RC_CMD_SEND_COMMAND_FRAME] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, + [UWB_RC_CMD_SET_ASIE_NOTIF] = { + .size = sizeof(struct uwb_rc_evt_confirm), + }, +}; + +static +struct uwb_est_entry uwb_est_01_00xx[] = { + [UWB_RC_DAA_ENERGY_DETECTED] = { + .size = sizeof(struct uwb_rc_evt_daa_energy_detected), + }, + [UWB_RC_SET_DAA_ENERGY_MASK] = { + .size = sizeof(struct uwb_rc_evt_set_daa_energy_mask), + }, + [UWB_RC_SET_NOTIFICATION_FILTER_EX] = { + .size = sizeof(struct uwb_rc_evt_set_notification_filter_ex), + }, +}; + +/** + * Initialize the EST subsystem + * + * Register the standard tables also. + * + * FIXME: tag init + */ +int uwb_est_create(void) +{ + int result; + + uwb_est_size = 2; + uwb_est_used = 0; + uwb_est = kzalloc(uwb_est_size * sizeof(uwb_est[0]), GFP_KERNEL); + if (uwb_est == NULL) + return -ENOMEM; + + result = uwb_est_register(UWB_RC_CET_GENERAL, 0, 0xffff, 0xffff, + uwb_est_00_00xx, ARRAY_SIZE(uwb_est_00_00xx)); + if (result < 0) + goto out; + result = uwb_est_register(UWB_RC_CET_EX_TYPE_1, 0, 0xffff, 0xffff, + uwb_est_01_00xx, ARRAY_SIZE(uwb_est_01_00xx)); +out: + return result; +} + + +/** Clean it up */ +void uwb_est_destroy(void) +{ + kfree(uwb_est); + uwb_est = NULL; + uwb_est_size = uwb_est_used = 0; +} + + +/** + * Double the capacity of the EST table + * + * @returns 0 if ok, < 0 errno no error. + */ +static +int uwb_est_grow(void) +{ + size_t actual_size = uwb_est_size * sizeof(uwb_est[0]); + void *new = kmalloc(2 * actual_size, GFP_ATOMIC); + if (new == NULL) + return -ENOMEM; + memcpy(new, uwb_est, actual_size); + memset(new + actual_size, 0, actual_size); + kfree(uwb_est); + uwb_est = new; + uwb_est_size *= 2; + return 0; +} + + +/** + * Register an event size table + * + * Makes room for it if the table is full, and then inserts it in the + * right position (entries are sorted by type, event_high, vendor and + * then product). + * + * @vendor: vendor code for matching against the device (0x0000 and + * 0xffff mean any); use 0x0000 to force all to match without + * checking possible vendor specific ones, 0xfffff to match + * after checking vendor specific ones. + * + * @product: product code from that vendor; same matching rules, use + * 0x0000 for not allowing vendor specific matches, 0xffff + * for allowing. + * + * This arragement just makes the tables sort differenty. Because the + * table is sorted by growing type-event_high-vendor-product, a zero + * vendor will match before than a 0x456a vendor, that will match + * before a 0xfffff vendor. + * + * @returns 0 if ok, < 0 errno on error (-ENOENT if not found). + */ +/* FIXME: add bus type to vendor/product code */ +int uwb_est_register(u8 type, u8 event_high, u16 vendor, u16 product, + const struct uwb_est_entry *entry, size_t entries) +{ + unsigned long flags; + unsigned itr; + u16 type_event_high; + int result = 0; + + write_lock_irqsave(&uwb_est_lock, flags); + if (uwb_est_used == uwb_est_size) { + result = uwb_est_grow(); + if (result < 0) + goto out; + } + /* Find the right spot to insert it in */ + type_event_high = type << 8 | event_high; + for (itr = 0; itr < uwb_est_used; itr++) + if (uwb_est[itr].type_event_high < type + && uwb_est[itr].vendor < vendor + && uwb_est[itr].product < product) + break; + + /* Shift others to make room for the new one? */ + if (itr < uwb_est_used) + memmove(&uwb_est[itr+1], &uwb_est[itr], uwb_est_used - itr); + uwb_est[itr].type_event_high = type << 8 | event_high; + uwb_est[itr].vendor = vendor; + uwb_est[itr].product = product; + uwb_est[itr].entry = entry; + uwb_est[itr].entries = entries; + uwb_est_used++; +out: + write_unlock_irqrestore(&uwb_est_lock, flags); + return result; +} +EXPORT_SYMBOL_GPL(uwb_est_register); + + +/** + * Unregister an event size table + * + * This just removes the specified entry and moves the ones after it + * to fill in the gap. This is needed to keep the list sorted; no + * reallocation is done to reduce the size of the table. + * + * We unregister by all the data we used to register instead of by + * pointer to the @entry array because we might have used the same + * table for a bunch of IDs (for example). + * + * @returns 0 if ok, < 0 errno on error (-ENOENT if not found). + */ +int uwb_est_unregister(u8 type, u8 event_high, u16 vendor, u16 product, + const struct uwb_est_entry *entry, size_t entries) +{ + unsigned long flags; + unsigned itr; + struct uwb_est est_cmp = { + .type_event_high = type << 8 | event_high, + .vendor = vendor, + .product = product, + .entry = entry, + .entries = entries + }; + write_lock_irqsave(&uwb_est_lock, flags); + for (itr = 0; itr < uwb_est_used; itr++) + if (!memcmp(&uwb_est[itr], &est_cmp, sizeof(est_cmp))) + goto found; + write_unlock_irqrestore(&uwb_est_lock, flags); + return -ENOENT; + +found: + if (itr < uwb_est_used - 1) /* Not last one? move ones above */ + memmove(&uwb_est[itr], &uwb_est[itr+1], uwb_est_used - itr - 1); + uwb_est_used--; + write_unlock_irqrestore(&uwb_est_lock, flags); + return 0; +} +EXPORT_SYMBOL_GPL(uwb_est_unregister); + + +/** + * Get the size of an event from a table + * + * @rceb: pointer to the buffer with the event + * @rceb_size: size of the area pointed to by @rceb in bytes. + * @returns: > 0 Size of the event + * -ENOSPC An area big enough was not provided to look + * ahead into the event's guts and guess the size. + * -EINVAL Unknown event code (wEvent). + * + * This will look at the received RCEB and guess what is the total + * size. For variable sized events, it will look further ahead into + * their length field to see how much data should be read. + * + * Note this size is *not* final--the neh (Notification/Event Handle) + * might specificy an extra size to add. + */ +static +ssize_t uwb_est_get_size(struct uwb_rc *uwb_rc, struct uwb_est *est, + u8 event_low, const struct uwb_rceb *rceb, + size_t rceb_size) +{ + unsigned offset; + ssize_t size; + struct device *dev = &uwb_rc->uwb_dev.dev; + const struct uwb_est_entry *entry; + + size = -ENOENT; + if (event_low >= est->entries) { /* in range? */ + dev_err(dev, "EST %p 0x%04x/%04x/%04x[%u]: event %u out of range\n", + est, est->type_event_high, est->vendor, est->product, + est->entries, event_low); + goto out; + } + size = -ENOENT; + entry = &est->entry[event_low]; + if (entry->size == 0 && entry->offset == 0) { /* unknown? */ + dev_err(dev, "EST %p 0x%04x/%04x/%04x[%u]: event %u unknown\n", + est, est->type_event_high, est->vendor, est->product, + est->entries, event_low); + goto out; + } + offset = entry->offset; /* extra fries with that? */ + if (offset == 0) + size = entry->size; + else { + /* Ops, got an extra size field at 'offset'--read it */ + const void *ptr = rceb; + size_t type_size = 0; + offset--; + size = -ENOSPC; /* enough data for more? */ + switch (entry->type) { + case UWB_EST_16: type_size = sizeof(__le16); break; + case UWB_EST_8: type_size = sizeof(u8); break; + default: BUG(); + } + if (offset + type_size > rceb_size) { + dev_err(dev, "EST %p 0x%04x/%04x/%04x[%u]: " + "not enough data to read extra size\n", + est, est->type_event_high, est->vendor, + est->product, est->entries); + goto out; + } + size = entry->size; + ptr += offset; + switch (entry->type) { + case UWB_EST_16: size += le16_to_cpu(*(__le16 *)ptr); break; + case UWB_EST_8: size += *(u8 *)ptr; break; + default: BUG(); + } + } +out: + return size; +} + + +/** + * Guesses the size of a WA event + * + * @rceb: pointer to the buffer with the event + * @rceb_size: size of the area pointed to by @rceb in bytes. + * @returns: > 0 Size of the event + * -ENOSPC An area big enough was not provided to look + * ahead into the event's guts and guess the size. + * -EINVAL Unknown event code (wEvent). + * + * This will look at the received RCEB and guess what is the total + * size by checking all the tables registered with + * uwb_est_register(). For variable sized events, it will look further + * ahead into their length field to see how much data should be read. + * + * Note this size is *not* final--the neh (Notification/Event Handle) + * might specificy an extra size to add or replace. + */ +ssize_t uwb_est_find_size(struct uwb_rc *rc, const struct uwb_rceb *rceb, + size_t rceb_size) +{ + /* FIXME: add vendor/product data */ + ssize_t size; + struct device *dev = &rc->uwb_dev.dev; + unsigned long flags; + unsigned itr; + u16 type_event_high, event; + u8 *ptr = (u8 *) rceb; + + read_lock_irqsave(&uwb_est_lock, flags); + d_printf(2, dev, "Size query for event 0x%02x/%04x/%02x," + " buffer size %ld\n", + (unsigned) rceb->bEventType, + (unsigned) le16_to_cpu(rceb->wEvent), + (unsigned) rceb->bEventContext, + (long) rceb_size); + size = -ENOSPC; + if (rceb_size < sizeof(*rceb)) + goto out; + event = le16_to_cpu(rceb->wEvent); + type_event_high = rceb->bEventType << 8 | (event & 0xff00) >> 8; + for (itr = 0; itr < uwb_est_used; itr++) { + d_printf(3, dev, "Checking EST 0x%04x/%04x/%04x\n", + uwb_est[itr].type_event_high, uwb_est[itr].vendor, + uwb_est[itr].product); + if (uwb_est[itr].type_event_high != type_event_high) + continue; + size = uwb_est_get_size(rc, &uwb_est[itr], + event & 0x00ff, rceb, rceb_size); + /* try more tables that might handle the same type */ + if (size != -ENOENT) + goto out; + } + dev_dbg(dev, "event 0x%02x/%04x/%02x: no handlers available; " + "RCEB %02x %02x %02x %02x\n", + (unsigned) rceb->bEventType, + (unsigned) le16_to_cpu(rceb->wEvent), + (unsigned) rceb->bEventContext, + ptr[0], ptr[1], ptr[2], ptr[3]); + size = -ENOENT; +out: + read_unlock_irqrestore(&uwb_est_lock, flags); + return size; +} +EXPORT_SYMBOL_GPL(uwb_est_find_size); diff --git a/drivers/uwb/hwa-rc.c b/drivers/uwb/hwa-rc.c new file mode 100644 index 000000000000..3d26fa0f8ae1 --- /dev/null +++ b/drivers/uwb/hwa-rc.c @@ -0,0 +1,926 @@ +/* + * WUSB Host Wire Adapter: Radio Control Interface (WUSB[8.6]) + * Radio Control command/event transport + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Initialize the Radio Control interface Driver. + * + * For each device probed, creates an 'struct hwarc' which contains + * just the representation of the UWB Radio Controller, and the logic + * for reading notifications and passing them to the UWB Core. + * + * So we initialize all of those, register the UWB Radio Controller + * and setup the notification/event handle to pipe the notifications + * to the UWB management Daemon. + * + * Command and event filtering. + * + * This is the driver for the Radio Control Interface described in WUSB + * 1.0. The core UWB module assumes that all drivers are compliant to the + * WHCI 0.95 specification. We thus create a filter that parses all + * incoming messages from the (WUSB 1.0) device and manipulate them to + * conform to the WHCI 0.95 specification. Similarly, outgoing messages + * are parsed and manipulated to conform to the WUSB 1.0 compliant messages + * that the device expects. Only a few messages are affected: + * Affected events: + * UWB_RC_EVT_BEACON + * UWB_RC_EVT_BP_SLOT_CHANGE + * UWB_RC_EVT_DRP_AVAIL + * UWB_RC_EVT_DRP + * Affected commands: + * UWB_RC_CMD_SCAN + * UWB_RC_CMD_SET_DRP_IE + * + * + * + */ +#include <linux/version.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/usb/wusb.h> +#include <linux/usb/wusb-wa.h> +#include <linux/uwb.h> +#include "uwb-internal.h" +#define D_LOCAL 1 +#include <linux/uwb/debug.h> + +/* The device uses commands and events from the WHCI specification, although + * reporting itself as WUSB compliant. */ +#define WUSB_QUIRK_WHCI_CMD_EVT 0x01 + +/** + * Descriptor for an instance of the UWB Radio Control Driver that + * attaches to the RCI interface of the Host Wired Adapter. + * + * Unless there is a lock specific to the 'data members', all access + * is protected by uwb_rc->mutex. + * + * The NEEP (Notification/Event EndPoint) URB (@neep_urb) writes to + * @rd_buffer. Note there is no locking because it is perfectly (heh!) + * serialized--probe() submits an URB, callback is called, processes + * the data (synchronously), submits another URB, and so on. There is + * no concurrent access to the buffer. + */ +struct hwarc { + struct usb_device *usb_dev; + struct usb_interface *usb_iface; + struct uwb_rc *uwb_rc; /* UWB host controller */ + struct urb *neep_urb; /* Notification endpoint handling */ + struct edc neep_edc; + void *rd_buffer; /* NEEP read buffer */ +}; + + +/* Beacon received notification (WUSB 1.0 [8.6.3.2]) */ +struct uwb_rc_evt_beacon_WUSB_0100 { + struct uwb_rceb rceb; + u8 bChannelNumber; + __le16 wBPSTOffset; + u8 bLQI; + u8 bRSSI; + __le16 wBeaconInfoLength; + u8 BeaconInfo[]; +} __attribute__((packed)); + +/** + * Filter WUSB 1.0 BEACON RCV notification to be WHCI 0.95 + * + * @header: the incoming event + * @buf_size: size of buffer containing incoming event + * @new_size: size of event after filtering completed + * + * The WHCI 0.95 spec has a "Beacon Type" field. This value is unknown at + * the time we receive the beacon from WUSB so we just set it to + * UWB_RC_BEACON_TYPE_NEIGHBOR as a default. + * The solution below allocates memory upon receipt of every beacon from a + * WUSB device. This will deteriorate performance. What is the right way to + * do this? + */ +static +int hwarc_filter_evt_beacon_WUSB_0100(struct uwb_rc *rc, + struct uwb_rceb **header, + const size_t buf_size, + size_t *new_size) +{ + struct uwb_rc_evt_beacon_WUSB_0100 *be; + struct uwb_rc_evt_beacon *newbe; + size_t bytes_left, ielength; + struct device *dev = &rc->uwb_dev.dev; + + be = container_of(*header, struct uwb_rc_evt_beacon_WUSB_0100, rceb); + bytes_left = buf_size; + if (bytes_left < sizeof(*be)) { + dev_err(dev, "Beacon Received Notification: Not enough data " + "to decode for filtering (%zu vs %zu bytes needed)\n", + bytes_left, sizeof(*be)); + return -EINVAL; + } + bytes_left -= sizeof(*be); + ielength = le16_to_cpu(be->wBeaconInfoLength); + if (bytes_left < ielength) { + dev_err(dev, "Beacon Received Notification: Not enough data " + "to decode IEs (%zu vs %zu bytes needed)\n", + bytes_left, ielength); + return -EINVAL; + } + newbe = kzalloc(sizeof(*newbe) + ielength, GFP_ATOMIC); + if (newbe == NULL) + return -ENOMEM; + newbe->rceb = be->rceb; + newbe->bChannelNumber = be->bChannelNumber; + newbe->bBeaconType = UWB_RC_BEACON_TYPE_NEIGHBOR; + newbe->wBPSTOffset = be->wBPSTOffset; + newbe->bLQI = be->bLQI; + newbe->bRSSI = be->bRSSI; + newbe->wBeaconInfoLength = be->wBeaconInfoLength; + memcpy(newbe->BeaconInfo, be->BeaconInfo, ielength); + *header = &newbe->rceb; + *new_size = sizeof(*newbe) + ielength; + return 1; /* calling function will free memory */ +} + + +/* DRP Availability change notification (WUSB 1.0 [8.6.3.8]) */ +struct uwb_rc_evt_drp_avail_WUSB_0100 { + struct uwb_rceb rceb; + __le16 wIELength; + u8 IEData[]; +} __attribute__((packed)); + +/** + * Filter WUSB 1.0 DRP AVAILABILITY CHANGE notification to be WHCI 0.95 + * + * @header: the incoming event + * @buf_size: size of buffer containing incoming event + * @new_size: size of event after filtering completed + */ +static +int hwarc_filter_evt_drp_avail_WUSB_0100(struct uwb_rc *rc, + struct uwb_rceb **header, + const size_t buf_size, + size_t *new_size) +{ + struct uwb_rc_evt_drp_avail_WUSB_0100 *da; + struct uwb_rc_evt_drp_avail *newda; + struct uwb_ie_hdr *ie_hdr; + size_t bytes_left, ielength; + struct device *dev = &rc->uwb_dev.dev; + + + da = container_of(*header, struct uwb_rc_evt_drp_avail_WUSB_0100, rceb); + bytes_left = buf_size; + if (bytes_left < sizeof(*da)) { + dev_err(dev, "Not enough data to decode DRP Avail " + "Notification for filtering. Expected %zu, " + "received %zu.\n", (size_t)sizeof(*da), bytes_left); + return -EINVAL; + } + bytes_left -= sizeof(*da); + ielength = le16_to_cpu(da->wIELength); + if (bytes_left < ielength) { + dev_err(dev, "DRP Avail Notification filter: IE length " + "[%zu bytes] does not match actual length " + "[%zu bytes].\n", ielength, bytes_left); + return -EINVAL; + } + if (ielength < sizeof(*ie_hdr)) { + dev_err(dev, "DRP Avail Notification filter: Not enough " + "data to decode IE [%zu bytes, %zu needed]\n", + ielength, sizeof(*ie_hdr)); + return -EINVAL; + } + ie_hdr = (void *) da->IEData; + if (ie_hdr->length > 32) { + dev_err(dev, "DRP Availability Change event has unexpected " + "length for filtering. Expected < 32 bytes, " + "got %zu bytes.\n", (size_t)ie_hdr->length); + return -EINVAL; + } + newda = kzalloc(sizeof(*newda), GFP_ATOMIC); + if (newda == NULL) + return -ENOMEM; + newda->rceb = da->rceb; + memcpy(newda->bmp, (u8 *) ie_hdr + sizeof(*ie_hdr), ie_hdr->length); + *header = &newda->rceb; + *new_size = sizeof(*newda); + return 1; /* calling function will free memory */ +} + + +/* DRP notification (WUSB 1.0 [8.6.3.9]) */ +struct uwb_rc_evt_drp_WUSB_0100 { + struct uwb_rceb rceb; + struct uwb_dev_addr wSrcAddr; + u8 bExplicit; + __le16 wIELength; + u8 IEData[]; +} __attribute__((packed)); + +/** + * Filter WUSB 1.0 DRP Notification to be WHCI 0.95 + * + * @header: the incoming event + * @buf_size: size of buffer containing incoming event + * @new_size: size of event after filtering completed + * + * It is hard to manage DRP reservations without having a Reason code. + * Unfortunately there is none in the WUSB spec. We just set the default to + * DRP IE RECEIVED. + * We do not currently use the bBeaconSlotNumber value, so we set this to + * zero for now. + */ +static +int hwarc_filter_evt_drp_WUSB_0100(struct uwb_rc *rc, + struct uwb_rceb **header, + const size_t buf_size, + size_t *new_size) +{ + struct uwb_rc_evt_drp_WUSB_0100 *drpev; + struct uwb_rc_evt_drp *newdrpev; + size_t bytes_left, ielength; + struct device *dev = &rc->uwb_dev.dev; + + drpev = container_of(*header, struct uwb_rc_evt_drp_WUSB_0100, rceb); + bytes_left = buf_size; + if (bytes_left < sizeof(*drpev)) { + dev_err(dev, "Not enough data to decode DRP Notification " + "for filtering. Expected %zu, received %zu.\n", + (size_t)sizeof(*drpev), bytes_left); + return -EINVAL; + } + ielength = le16_to_cpu(drpev->wIELength); + bytes_left -= sizeof(*drpev); + if (bytes_left < ielength) { + dev_err(dev, "DRP Notification filter: header length [%zu " + "bytes] does not match actual length [%zu " + "bytes].\n", ielength, bytes_left); + return -EINVAL; + } + newdrpev = kzalloc(sizeof(*newdrpev) + ielength, GFP_ATOMIC); + if (newdrpev == NULL) + return -ENOMEM; + newdrpev->rceb = drpev->rceb; + newdrpev->src_addr = drpev->wSrcAddr; + newdrpev->reason = UWB_DRP_NOTIF_DRP_IE_RCVD; + newdrpev->beacon_slot_number = 0; + newdrpev->ie_length = drpev->wIELength; + memcpy(newdrpev->ie_data, drpev->IEData, ielength); + *header = &newdrpev->rceb; + *new_size = sizeof(*newdrpev) + ielength; + return 1; /* calling function will free memory */ +} + + +/* Scan Command (WUSB 1.0 [8.6.2.5]) */ +struct uwb_rc_cmd_scan_WUSB_0100 { + struct uwb_rccb rccb; + u8 bChannelNumber; + u8 bScanState; +} __attribute__((packed)); + +/** + * Filter WHCI 0.95 SCAN command to be WUSB 1.0 SCAN command + * + * @header: command sent to device (compliant to WHCI 0.95) + * @size: size of command sent to device + * + * We only reduce the size by two bytes because the WUSB 1.0 scan command + * does not have the last field (wStarttime). Also, make sure we don't send + * the device an unexpected scan type. + */ +static +int hwarc_filter_cmd_scan_WUSB_0100(struct uwb_rc *rc, + struct uwb_rccb **header, + size_t *size) +{ + struct uwb_rc_cmd_scan *sc; + + sc = container_of(*header, struct uwb_rc_cmd_scan, rccb); + + if (sc->bScanState == UWB_SCAN_ONLY_STARTTIME) + sc->bScanState = UWB_SCAN_ONLY; + /* Don't send the last two bytes. */ + *size -= 2; + return 0; +} + + +/* SET DRP IE command (WUSB 1.0 [8.6.2.7]) */ +struct uwb_rc_cmd_set_drp_ie_WUSB_0100 { + struct uwb_rccb rccb; + u8 bExplicit; + __le16 wIELength; + struct uwb_ie_drp IEData[]; +} __attribute__((packed)); + +/** + * Filter WHCI 0.95 SET DRP IE command to be WUSB 1.0 SET DRP IE command + * + * @header: command sent to device (compliant to WHCI 0.95) + * @size: size of command sent to device + * + * WUSB has an extra bExplicit field - we assume always explicit + * negotiation so this field is set. The command expected by the device is + * thus larger than the one prepared by the driver so we need to + * reallocate memory to accommodate this. + * We trust the driver to send us the correct data so no checking is done + * on incoming data - evn though it is variable length. + */ +static +int hwarc_filter_cmd_set_drp_ie_WUSB_0100(struct uwb_rc *rc, + struct uwb_rccb **header, + size_t *size) +{ + struct uwb_rc_cmd_set_drp_ie *orgcmd; + struct uwb_rc_cmd_set_drp_ie_WUSB_0100 *cmd; + size_t ielength; + + orgcmd = container_of(*header, struct uwb_rc_cmd_set_drp_ie, rccb); + ielength = le16_to_cpu(orgcmd->wIELength); + cmd = kzalloc(sizeof(*cmd) + ielength, GFP_KERNEL); + if (cmd == NULL) + return -ENOMEM; + cmd->rccb = orgcmd->rccb; + cmd->bExplicit = 0; + cmd->wIELength = orgcmd->wIELength; + memcpy(cmd->IEData, orgcmd->IEData, ielength); + *header = &cmd->rccb; + *size = sizeof(*cmd) + ielength; + return 1; /* calling function will free memory */ +} + + +/** + * Filter data from WHCI driver to WUSB device + * + * @header: WHCI 0.95 compliant command from driver + * @size: length of command + * + * The routine managing commands to the device (uwb_rc_cmd()) will call the + * filtering function pointer (if it exists) before it passes any data to + * the device. At this time the command has been formatted according to + * WHCI 0.95 and is ready to be sent to the device. + * + * The filter function will be provided with the current command and its + * length. The function will manipulate the command if necessary and + * potentially reallocate memory for a command that needed more memory that + * the given command. If new memory was created the function will return 1 + * to indicate to the calling function that the memory need to be freed + * when not needed any more. The size will contain the new length of the + * command. + * If memory has not been allocated we rely on the original mechanisms to + * free the memory of the command - even when we reduce the value of size. + */ +static +int hwarc_filter_cmd_WUSB_0100(struct uwb_rc *rc, struct uwb_rccb **header, + size_t *size) +{ + int result; + struct uwb_rccb *rccb = *header; + int cmd = le16_to_cpu(rccb->wCommand); + switch (cmd) { + case UWB_RC_CMD_SCAN: + result = hwarc_filter_cmd_scan_WUSB_0100(rc, header, size); + break; + case UWB_RC_CMD_SET_DRP_IE: + result = hwarc_filter_cmd_set_drp_ie_WUSB_0100(rc, header, size); + break; + default: + result = -ENOANO; + break; + } + return result; +} + + +/** + * Filter data from WHCI driver to WUSB device + * + * @header: WHCI 0.95 compliant command from driver + * @size: length of command + * + * Filter commands based on which protocol the device supports. The WUSB + * errata should be the same as WHCI 0.95 so we do not filter that here - + * only WUSB 1.0. + */ +static +int hwarc_filter_cmd(struct uwb_rc *rc, struct uwb_rccb **header, + size_t *size) +{ + int result = -ENOANO; + if (rc->version == 0x0100) + result = hwarc_filter_cmd_WUSB_0100(rc, header, size); + return result; +} + + +/** + * Compute return value as sum of incoming value and value at given offset + * + * @rceb: event for which we compute the size, it contains a variable + * length field. + * @core_size: size of the "non variable" part of the event + * @offset: place in event where the length of the variable part is stored + * @buf_size: total length of buffer in which event arrived - we need to make + * sure we read the offset in memory that is still part of the event + */ +static +ssize_t hwarc_get_event_size(struct uwb_rc *rc, const struct uwb_rceb *rceb, + size_t core_size, size_t offset, + const size_t buf_size) +{ + ssize_t size = -ENOSPC; + const void *ptr = rceb; + size_t type_size = sizeof(__le16); + struct device *dev = &rc->uwb_dev.dev; + + if (offset + type_size >= buf_size) { + dev_err(dev, "Not enough data to read extra size of event " + "0x%02x/%04x/%02x, only got %zu bytes.\n", + rceb->bEventType, le16_to_cpu(rceb->wEvent), + rceb->bEventContext, buf_size); + goto out; + } + ptr += offset; + size = core_size + le16_to_cpu(*(__le16 *)ptr); +out: + return size; +} + + +/* Beacon slot change notification (WUSB 1.0 [8.6.3.5]) */ +struct uwb_rc_evt_bp_slot_change_WUSB_0100 { + struct uwb_rceb rceb; + u8 bSlotNumber; +} __attribute__((packed)); + + +/** + * Filter data from WUSB device to WHCI driver + * + * @header: incoming event + * @buf_size: size of buffer in which event arrived + * @_event_size: actual size of event in the buffer + * @new_size: size of event after filtered + * + * We don't know how the buffer is constructed - there may be more than one + * event in it so buffer length does not determine event length. We first + * determine the expected size of the incoming event. This value is passed + * back only if the actual filtering succeeded (so we know the computed + * expected size is correct). This value will be zero if + * the event did not need any filtering. + * + * WHCI interprets the BP Slot Change event's data differently than + * WUSB. The event sizes are exactly the same. The data field + * indicates the new beacon slot in which a RC is transmitting its + * beacon. The maximum value of this is 96 (wMacBPLength ECMA-368 + * 17.16 (Table 117)). We thus know that the WUSB value will not set + * the bit bNoSlot, so we don't really do anything (placeholder). + */ +static +int hwarc_filter_event_WUSB_0100(struct uwb_rc *rc, struct uwb_rceb **header, + const size_t buf_size, size_t *_real_size, + size_t *_new_size) +{ + int result = -ENOANO; + struct uwb_rceb *rceb = *header; + int event = le16_to_cpu(rceb->wEvent); + size_t event_size; + size_t core_size, offset; + + if (rceb->bEventType != UWB_RC_CET_GENERAL) + goto out; + switch (event) { + case UWB_RC_EVT_BEACON: + core_size = sizeof(struct uwb_rc_evt_beacon_WUSB_0100); + offset = offsetof(struct uwb_rc_evt_beacon_WUSB_0100, + wBeaconInfoLength); + event_size = hwarc_get_event_size(rc, rceb, core_size, + offset, buf_size); + if (event_size < 0) + goto out; + *_real_size = event_size; + result = hwarc_filter_evt_beacon_WUSB_0100(rc, header, + buf_size, _new_size); + break; + case UWB_RC_EVT_BP_SLOT_CHANGE: + *_new_size = *_real_size = + sizeof(struct uwb_rc_evt_bp_slot_change_WUSB_0100); + result = 0; + break; + + case UWB_RC_EVT_DRP_AVAIL: + core_size = sizeof(struct uwb_rc_evt_drp_avail_WUSB_0100); + offset = offsetof(struct uwb_rc_evt_drp_avail_WUSB_0100, + wIELength); + event_size = hwarc_get_event_size(rc, rceb, core_size, + offset, buf_size); + if (event_size < 0) + goto out; + *_real_size = event_size; + result = hwarc_filter_evt_drp_avail_WUSB_0100( + rc, header, buf_size, _new_size); + break; + + case UWB_RC_EVT_DRP: + core_size = sizeof(struct uwb_rc_evt_drp_WUSB_0100); + offset = offsetof(struct uwb_rc_evt_drp_WUSB_0100, wIELength); + event_size = hwarc_get_event_size(rc, rceb, core_size, + offset, buf_size); + if (event_size < 0) + goto out; + *_real_size = event_size; + result = hwarc_filter_evt_drp_WUSB_0100(rc, header, + buf_size, _new_size); + break; + + default: + break; + } +out: + return result; +} + +/** + * Filter data from WUSB device to WHCI driver + * + * @header: incoming event + * @buf_size: size of buffer in which event arrived + * @_event_size: actual size of event in the buffer + * @_new_size: size of event after filtered + * + * Filter events based on which protocol the device supports. The WUSB + * errata should be the same as WHCI 0.95 so we do not filter that here - + * only WUSB 1.0. + * + * If we don't handle it, we return -ENOANO (why the weird error code? + * well, so if I get it, I can pinpoint in the code that raised + * it...after all, not too many places use the higher error codes). + */ +static +int hwarc_filter_event(struct uwb_rc *rc, struct uwb_rceb **header, + const size_t buf_size, size_t *_real_size, + size_t *_new_size) +{ + int result = -ENOANO; + if (rc->version == 0x0100) + result = hwarc_filter_event_WUSB_0100( + rc, header, buf_size, _real_size, _new_size); + return result; +} + + +/** + * Execute an UWB RC command on HWA + * + * @rc: Instance of a Radio Controller that is a HWA + * @cmd: Buffer containing the RCCB and payload to execute + * @cmd_size: Size of the command buffer. + * + * NOTE: rc's mutex has to be locked + */ +static +int hwarc_cmd(struct uwb_rc *uwb_rc, const struct uwb_rccb *cmd, size_t cmd_size) +{ + struct hwarc *hwarc = uwb_rc->priv; + return usb_control_msg( + hwarc->usb_dev, usb_sndctrlpipe(hwarc->usb_dev, 0), + WA_EXEC_RC_CMD, USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + 0, hwarc->usb_iface->cur_altsetting->desc.bInterfaceNumber, + (void *) cmd, cmd_size, 100 /* FIXME: this is totally arbitrary */); +} + +static +int hwarc_reset(struct uwb_rc *uwb_rc) +{ + struct hwarc *hwarc = uwb_rc->priv; + return usb_reset_device(hwarc->usb_dev); +} + +/** + * Callback for the notification and event endpoint + * + * Check's that everything is fine and then passes the read data to + * the notification/event handling mechanism (neh). + */ +static +void hwarc_neep_cb(struct urb *urb) +{ + struct hwarc *hwarc = urb->context; + struct usb_interface *usb_iface = hwarc->usb_iface; + struct device *dev = &usb_iface->dev; + int result; + + switch (result = urb->status) { + case 0: + d_printf(3, dev, "NEEP: receive stat %d, %zu bytes\n", + urb->status, (size_t)urb->actual_length); + uwb_rc_neh_grok(hwarc->uwb_rc, urb->transfer_buffer, + urb->actual_length); + break; + case -ECONNRESET: /* Not an error, but a controlled situation; */ + case -ENOENT: /* (we killed the URB)...so, no broadcast */ + d_printf(2, dev, "NEEP: URB reset/noent %d\n", urb->status); + goto out; + case -ESHUTDOWN: /* going away! */ + d_printf(2, dev, "NEEP: URB down %d\n", urb->status); + goto out; + default: /* On general errors, retry unless it gets ugly */ + if (edc_inc(&hwarc->neep_edc, EDC_MAX_ERRORS, + EDC_ERROR_TIMEFRAME)) + goto error_exceeded; + dev_err(dev, "NEEP: URB error %d\n", urb->status); + } + result = usb_submit_urb(urb, GFP_ATOMIC); + d_printf(3, dev, "NEEP: submit %d\n", result); + if (result < 0) { + dev_err(dev, "NEEP: Can't resubmit URB (%d) resetting device\n", + result); + goto error; + } +out: + return; + +error_exceeded: + dev_err(dev, "NEEP: URB max acceptable errors " + "exceeded, resetting device\n"); +error: + uwb_rc_neh_error(hwarc->uwb_rc, result); + uwb_rc_reset_all(hwarc->uwb_rc); + return; +} + +static void hwarc_init(struct hwarc *hwarc) +{ + edc_init(&hwarc->neep_edc); +} + +/** + * Initialize the notification/event endpoint stuff + * + * Note this is effectively a parallel thread; it knows that + * hwarc->uwb_rc always exists because the existence of a 'hwarc' + * means that there is a reverence on the hwarc->uwb_rc (see + * _probe()), and thus _neep_cb() can execute safely. + */ +static int hwarc_neep_init(struct uwb_rc *rc) +{ + struct hwarc *hwarc = rc->priv; + struct usb_interface *iface = hwarc->usb_iface; + struct usb_device *usb_dev = interface_to_usbdev(iface); + struct device *dev = &iface->dev; + int result; + struct usb_endpoint_descriptor *epd; + + epd = &iface->cur_altsetting->endpoint[0].desc; + hwarc->rd_buffer = (void *) __get_free_page(GFP_KERNEL); + if (hwarc->rd_buffer == NULL) { + dev_err(dev, "Unable to allocate notification's read buffer\n"); + goto error_rd_buffer; + } + hwarc->neep_urb = usb_alloc_urb(0, GFP_KERNEL); + if (hwarc->neep_urb == NULL) { + dev_err(dev, "Unable to allocate notification URB\n"); + goto error_urb_alloc; + } + usb_fill_int_urb(hwarc->neep_urb, usb_dev, + usb_rcvintpipe(usb_dev, epd->bEndpointAddress), + hwarc->rd_buffer, PAGE_SIZE, + hwarc_neep_cb, hwarc, epd->bInterval); + result = usb_submit_urb(hwarc->neep_urb, GFP_ATOMIC); + if (result < 0) { + dev_err(dev, "Cannot submit notification URB: %d\n", result); + goto error_neep_submit; + } + return 0; + +error_neep_submit: + usb_free_urb(hwarc->neep_urb); +error_urb_alloc: + free_page((unsigned long)hwarc->rd_buffer); +error_rd_buffer: + return -ENOMEM; +} + + +/** Clean up all the notification endpoint resources */ +static void hwarc_neep_release(struct uwb_rc *rc) +{ + struct hwarc *hwarc = rc->priv; + + usb_kill_urb(hwarc->neep_urb); + usb_free_urb(hwarc->neep_urb); + free_page((unsigned long)hwarc->rd_buffer); +} + +/** + * Get the version from class-specific descriptor + * + * NOTE: this descriptor comes with the big bundled configuration + * descriptor that includes the interfaces' and endpoints', so + * we just look for it in the cached copy kept by the USB stack. + * + * NOTE2: We convert LE fields to CPU order. + */ +static int hwarc_get_version(struct uwb_rc *rc) +{ + int result; + + struct hwarc *hwarc = rc->priv; + struct uwb_rc_control_intf_class_desc *descr; + struct device *dev = &rc->uwb_dev.dev; + struct usb_device *usb_dev = hwarc->usb_dev; + char *itr; + struct usb_descriptor_header *hdr; + size_t itr_size, actconfig_idx; + u16 version; + + actconfig_idx = (usb_dev->actconfig - usb_dev->config) / + sizeof(usb_dev->config[0]); + itr = usb_dev->rawdescriptors[actconfig_idx]; + itr_size = le16_to_cpu(usb_dev->actconfig->desc.wTotalLength); + while (itr_size >= sizeof(*hdr)) { + hdr = (struct usb_descriptor_header *) itr; + d_printf(3, dev, "Extra device descriptor: " + "type %02x/%u bytes @ %zu (%zu left)\n", + hdr->bDescriptorType, hdr->bLength, + (itr - usb_dev->rawdescriptors[actconfig_idx]), + itr_size); + if (hdr->bDescriptorType == USB_DT_CS_RADIO_CONTROL) + goto found; + itr += hdr->bLength; + itr_size -= hdr->bLength; + } + dev_err(dev, "cannot find Radio Control Interface Class descriptor\n"); + return -ENODEV; + +found: + result = -EINVAL; + if (hdr->bLength > itr_size) { /* is it available? */ + dev_err(dev, "incomplete Radio Control Interface Class " + "descriptor (%zu bytes left, %u needed)\n", + itr_size, hdr->bLength); + goto error; + } + if (hdr->bLength < sizeof(*descr)) { + dev_err(dev, "short Radio Control Interface Class " + "descriptor\n"); + goto error; + } + descr = (struct uwb_rc_control_intf_class_desc *) hdr; + /* Make LE fields CPU order */ + version = __le16_to_cpu(descr->bcdRCIVersion); + if (version != 0x0100) { + dev_err(dev, "Device reports protocol version 0x%04x. We " + "do not support that. \n", version); + result = -EINVAL; + goto error; + } + rc->version = version; + d_printf(3, dev, "Device supports WUSB protocol version 0x%04x \n", + rc->version); + result = 0; +error: + return result; +} + +/* + * By creating a 'uwb_rc', we have a reference on it -- that reference + * is the one we drop when we disconnect. + * + * No need to switch altsettings; according to WUSB1.0[8.6.1.1], there + * is only one altsetting allowed. + */ +static int hwarc_probe(struct usb_interface *iface, + const struct usb_device_id *id) +{ + int result; + struct uwb_rc *uwb_rc; + struct hwarc *hwarc; + struct device *dev = &iface->dev; + + result = -ENOMEM; + uwb_rc = uwb_rc_alloc(); + if (uwb_rc == NULL) { + dev_err(dev, "unable to allocate RC instance\n"); + goto error_rc_alloc; + } + hwarc = kzalloc(sizeof(*hwarc), GFP_KERNEL); + if (hwarc == NULL) { + dev_err(dev, "unable to allocate HWA RC instance\n"); + goto error_alloc; + } + hwarc_init(hwarc); + hwarc->usb_dev = usb_get_dev(interface_to_usbdev(iface)); + hwarc->usb_iface = usb_get_intf(iface); + hwarc->uwb_rc = uwb_rc; + + uwb_rc->owner = THIS_MODULE; + uwb_rc->start = hwarc_neep_init; + uwb_rc->stop = hwarc_neep_release; + uwb_rc->cmd = hwarc_cmd; + uwb_rc->reset = hwarc_reset; + if (id->driver_info & WUSB_QUIRK_WHCI_CMD_EVT) { + uwb_rc->filter_cmd = NULL; + uwb_rc->filter_event = NULL; + } else { + uwb_rc->filter_cmd = hwarc_filter_cmd; + uwb_rc->filter_event = hwarc_filter_event; + } + + result = uwb_rc_add(uwb_rc, dev, hwarc); + if (result < 0) + goto error_rc_add; + result = hwarc_get_version(uwb_rc); + if (result < 0) { + dev_err(dev, "cannot retrieve version of RC \n"); + goto error_get_version; + } + usb_set_intfdata(iface, hwarc); + return 0; + +error_get_version: + uwb_rc_rm(uwb_rc); +error_rc_add: + usb_put_intf(iface); + usb_put_dev(hwarc->usb_dev); +error_alloc: + uwb_rc_put(uwb_rc); +error_rc_alloc: + return result; +} + +static void hwarc_disconnect(struct usb_interface *iface) +{ + struct hwarc *hwarc = usb_get_intfdata(iface); + struct uwb_rc *uwb_rc = hwarc->uwb_rc; + + usb_set_intfdata(hwarc->usb_iface, NULL); + uwb_rc_rm(uwb_rc); + usb_put_intf(hwarc->usb_iface); + usb_put_dev(hwarc->usb_dev); + d_printf(1, &hwarc->usb_iface->dev, "freed hwarc %p\n", hwarc); + kfree(hwarc); + uwb_rc_put(uwb_rc); /* when creating the device, refcount = 1 */ +} + +/** USB device ID's that we handle */ +static struct usb_device_id hwarc_id_table[] = { + /* D-Link DUB-1210 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x07d1, 0x3d02, 0xe0, 0x01, 0x02), + .driver_info = WUSB_QUIRK_WHCI_CMD_EVT }, + /* Intel i1480 (using firmware 1.3PA2-20070828) */ + { USB_DEVICE_AND_INTERFACE_INFO(0x8086, 0x0c3b, 0xe0, 0x01, 0x02), + .driver_info = WUSB_QUIRK_WHCI_CMD_EVT }, + /* Generic match for the Radio Control interface */ + { USB_INTERFACE_INFO(0xe0, 0x01, 0x02), }, + { }, +}; +MODULE_DEVICE_TABLE(usb, hwarc_id_table); + +static struct usb_driver hwarc_driver = { + .name = "hwa-rc", + .probe = hwarc_probe, + .disconnect = hwarc_disconnect, + .id_table = hwarc_id_table, +}; + +static int __init hwarc_driver_init(void) +{ + int result; + result = usb_register(&hwarc_driver); + if (result < 0) + printk(KERN_ERR "HWA-RC: Cannot register USB driver: %d\n", + result); + return result; + +} +module_init(hwarc_driver_init); + +static void __exit hwarc_driver_exit(void) +{ + usb_deregister(&hwarc_driver); +} +module_exit(hwarc_driver_exit); + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("Host Wireless Adapter Radio Control Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/uwb/i1480/Makefile b/drivers/uwb/i1480/Makefile new file mode 100644 index 000000000000..212bbc7d4c32 --- /dev/null +++ b/drivers/uwb/i1480/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_UWB_I1480U) += dfu/ i1480-est.o +obj-$(CONFIG_UWB_I1480U_WLP) += i1480u-wlp/ diff --git a/drivers/uwb/i1480/dfu/Makefile b/drivers/uwb/i1480/dfu/Makefile new file mode 100644 index 000000000000..bd1b9f25424c --- /dev/null +++ b/drivers/uwb/i1480/dfu/Makefile @@ -0,0 +1,9 @@ +obj-$(CONFIG_UWB_I1480U) += i1480-dfu-usb.o + +i1480-dfu-usb-objs := \ + dfu.o \ + mac.o \ + phy.o \ + usb.o + + diff --git a/drivers/uwb/i1480/dfu/dfu.c b/drivers/uwb/i1480/dfu/dfu.c new file mode 100644 index 000000000000..9097b3b30385 --- /dev/null +++ b/drivers/uwb/i1480/dfu/dfu.c @@ -0,0 +1,217 @@ +/* + * Intel Wireless UWB Link 1480 + * Main driver + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Common code for firmware upload used by the USB and PCI version; + * i1480_fw_upload() takes a device descriptor and uses the function + * pointers it provides to upload firmware and prepare the PHY. + * + * As well, provides common functions used by the rest of the code. + */ +#include "i1480-dfu.h" +#include <linux/errno.h> +#include <linux/delay.h> +#include <linux/pci.h> +#include <linux/device.h> +#include <linux/uwb.h> +#include <linux/random.h> + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +/** + * i1480_rceb_check - Check RCEB for expected field values + * @i1480: pointer to device for which RCEB is being checked + * @rceb: RCEB being checked + * @cmd: which command the RCEB is related to + * @context: expected context + * @expected_type: expected event type + * @expected_event: expected event + * + * If @cmd is NULL, do not print error messages, but still return an error + * code. + * + * Return 0 if @rceb matches the expected values, -EINVAL otherwise. + */ +int i1480_rceb_check(const struct i1480 *i1480, const struct uwb_rceb *rceb, + const char *cmd, u8 context, u8 expected_type, + unsigned expected_event) +{ + int result = 0; + struct device *dev = i1480->dev; + if (rceb->bEventContext != context) { + if (cmd) + dev_err(dev, "%s: unexpected context id 0x%02x " + "(expected 0x%02x)\n", cmd, + rceb->bEventContext, context); + result = -EINVAL; + } + if (rceb->bEventType != expected_type) { + if (cmd) + dev_err(dev, "%s: unexpected event type 0x%02x " + "(expected 0x%02x)\n", cmd, + rceb->bEventType, expected_type); + result = -EINVAL; + } + if (le16_to_cpu(rceb->wEvent) != expected_event) { + if (cmd) + dev_err(dev, "%s: unexpected event 0x%04x " + "(expected 0x%04x)\n", cmd, + le16_to_cpu(rceb->wEvent), expected_event); + result = -EINVAL; + } + return result; +} +EXPORT_SYMBOL_GPL(i1480_rceb_check); + + +/** + * Execute a Radio Control Command + * + * Command data has to be in i1480->cmd_buf. + * + * @returns size of the reply data filled in i1480->evt_buf or < 0 errno + * code on error. + */ +ssize_t i1480_cmd(struct i1480 *i1480, const char *cmd_name, size_t cmd_size, + size_t reply_size) +{ + ssize_t result; + struct uwb_rceb *reply = i1480->evt_buf; + struct uwb_rccb *cmd = i1480->cmd_buf; + u16 expected_event = reply->wEvent; + u8 expected_type = reply->bEventType; + u8 context; + + d_fnstart(3, i1480->dev, "(%p, %s, %zu)\n", i1480, cmd_name, cmd_size); + init_completion(&i1480->evt_complete); + i1480->evt_result = -EINPROGRESS; + do { + get_random_bytes(&context, 1); + } while (context == 0x00 || context == 0xff); + cmd->bCommandContext = context; + result = i1480->cmd(i1480, cmd_name, cmd_size); + if (result < 0) + goto error; + /* wait for the callback to report a event was received */ + result = wait_for_completion_interruptible_timeout( + &i1480->evt_complete, HZ); + if (result == 0) { + result = -ETIMEDOUT; + goto error; + } + if (result < 0) + goto error; + result = i1480->evt_result; + if (result < 0) { + dev_err(i1480->dev, "%s: command reply reception failed: %zd\n", + cmd_name, result); + goto error; + } + /* + * Firmware versions >= 1.4.12224 for IOGear GUWA100U generate a + * spurious notification after firmware is downloaded. So check whether + * the receibed RCEB is such notification before assuming that the + * command has failed. + */ + if (i1480_rceb_check(i1480, i1480->evt_buf, NULL, + 0, 0xfd, 0x0022) == 0) { + /* Now wait for the actual RCEB for this command. */ + result = i1480->wait_init_done(i1480); + if (result < 0) + goto error; + result = i1480->evt_result; + } + if (result != reply_size) { + dev_err(i1480->dev, "%s returned only %zu bytes, %zu expected\n", + cmd_name, result, reply_size); + result = -EINVAL; + goto error; + } + /* Verify we got the right event in response */ + result = i1480_rceb_check(i1480, i1480->evt_buf, cmd_name, context, + expected_type, expected_event); +error: + d_fnend(3, i1480->dev, "(%p, %s, %zu) = %zd\n", + i1480, cmd_name, cmd_size, result); + return result; +} +EXPORT_SYMBOL_GPL(i1480_cmd); + + +static +int i1480_print_state(struct i1480 *i1480) +{ + int result; + u32 *buf = (u32 *) i1480->cmd_buf; + + result = i1480->read(i1480, 0x80080000, 2 * sizeof(*buf)); + if (result < 0) { + dev_err(i1480->dev, "cannot read U & L states: %d\n", result); + goto error; + } + dev_info(i1480->dev, "state U 0x%08x, L 0x%08x\n", buf[0], buf[1]); +error: + return result; +} + + +/* + * PCI probe, firmware uploader + * + * _mac_fw_upload() will call rc_setup(), which needs an rc_release(). + */ +int i1480_fw_upload(struct i1480 *i1480) +{ + int result; + + result = i1480_pre_fw_upload(i1480); /* PHY pre fw */ + if (result < 0 && result != -ENOENT) { + i1480_print_state(i1480); + goto error; + } + result = i1480_mac_fw_upload(i1480); /* MAC fw */ + if (result < 0) { + if (result == -ENOENT) + dev_err(i1480->dev, "Cannot locate MAC FW file '%s'\n", + i1480->mac_fw_name); + else + i1480_print_state(i1480); + goto error; + } + result = i1480_phy_fw_upload(i1480); /* PHY fw */ + if (result < 0 && result != -ENOENT) { + i1480_print_state(i1480); + goto error_rc_release; + } + /* + * FIXME: find some reliable way to check whether firmware is running + * properly. Maybe use some standard request that has no side effects? + */ + dev_info(i1480->dev, "firmware uploaded successfully\n"); +error_rc_release: + if (i1480->rc_release) + i1480->rc_release(i1480); + result = 0; +error: + return result; +} +EXPORT_SYMBOL_GPL(i1480_fw_upload); diff --git a/drivers/uwb/i1480/dfu/i1480-dfu.h b/drivers/uwb/i1480/dfu/i1480-dfu.h new file mode 100644 index 000000000000..46f45e800f36 --- /dev/null +++ b/drivers/uwb/i1480/dfu/i1480-dfu.h @@ -0,0 +1,260 @@ +/* + * i1480 Device Firmware Upload + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * This driver is the firmware uploader for the Intel Wireless UWB + * Link 1480 device (both in the USB and PCI incarnations). + * + * The process is quite simple: we stop the device, write the firmware + * to its memory and then restart it. Wait for the device to let us + * know it is done booting firmware. Ready. + * + * We might have to upload before or after a phy firmware (which might + * be done in two methods, using a normal firmware image or through + * the MPI port). + * + * Because USB and PCI use common methods, we just make ops out of the + * common operations (read, write, wait_init_done and cmd) and + * implement them in usb.c and pci.c. + * + * The flow is (some parts omitted): + * + * i1480_{usb,pci}_probe() On enumerate/discovery + * i1480_fw_upload() + * i1480_pre_fw_upload() + * __mac_fw_upload() + * fw_hdrs_load() + * mac_fw_hdrs_push() + * i1480->write() [i1480_{usb,pci}_write()] + * i1480_fw_cmp() + * i1480->read() [i1480_{usb,pci}_read()] + * i1480_mac_fw_upload() + * __mac_fw_upload() + * i1480->setup(() + * i1480->wait_init_done() + * i1480_cmd_reset() + * i1480->cmd() [i1480_{usb,pci}_cmd()] + * ... + * i1480_phy_fw_upload() + * request_firmware() + * i1480_mpi_write() + * i1480->cmd() [i1480_{usb,pci}_cmd()] + * + * Once the probe function enumerates the device and uploads the + * firmware, we just exit with -ENODEV, as we don't really want to + * attach to the device. + */ +#ifndef __i1480_DFU_H__ +#define __i1480_DFU_H__ + +#include <linux/uwb/spec.h> +#include <linux/types.h> +#include <linux/completion.h> + +#define i1480_FW_UPLOAD_MODE_MASK (cpu_to_le32(0x00000018)) + +#if i1480_FW > 0x00000302 +#define i1480_RCEB_EXTENDED +#endif + +struct uwb_rccb; +struct uwb_rceb; + +/* + * Common firmware upload handlers + * + * Normally you embed this struct in another one specific to your hw. + * + * @write Write to device's memory from buffer. + * @read Read from device's memory to i1480->evt_buf. + * @setup Setup device after basic firmware is uploaded + * @wait_init_done + * Wait for the device to send a notification saying init + * is done. + * @cmd FOP for issuing the command to the hardware. The + * command data is contained in i1480->cmd_buf and the size + * is supplied as an argument. The command replied is put + * in i1480->evt_buf and the size in i1480->evt_result (or if + * an error, a < 0 errno code). + * + * @cmd_buf Memory buffer used to send commands to the device. + * Allocated by the upper layers i1480_fw_upload(). + * Size has to be @buf_size. + * @evt_buf Memory buffer used to place the async notifications + * received by the hw. Allocated by the upper layers + * i1480_fw_upload(). + * Size has to be @buf_size. + * @cmd_complete + * Low level driver uses this to notify code waiting afor + * an event that the event has arrived and data is in + * i1480->evt_buf (and size/result in i1480->evt_result). + * @hw_rev + * Use this value to activate dfu code to support new revisions + * of hardware. i1480_init() sets this to a default value. + * It should be updated by the USB and PCI code. + */ +struct i1480 { + struct device *dev; + + int (*write)(struct i1480 *, u32 addr, const void *, size_t); + int (*read)(struct i1480 *, u32 addr, size_t); + int (*rc_setup)(struct i1480 *); + void (*rc_release)(struct i1480 *); + int (*wait_init_done)(struct i1480 *); + int (*cmd)(struct i1480 *, const char *cmd_name, size_t cmd_size); + const char *pre_fw_name; + const char *mac_fw_name; + const char *mac_fw_name_deprecate; /* FIXME: Will go away */ + const char *phy_fw_name; + u8 hw_rev; + + size_t buf_size; /* size of both evt_buf and cmd_buf */ + void *evt_buf, *cmd_buf; + ssize_t evt_result; + struct completion evt_complete; +}; + +static inline +void i1480_init(struct i1480 *i1480) +{ + i1480->hw_rev = 1; + init_completion(&i1480->evt_complete); +} + +extern int i1480_fw_upload(struct i1480 *); +extern int i1480_pre_fw_upload(struct i1480 *); +extern int i1480_mac_fw_upload(struct i1480 *); +extern int i1480_phy_fw_upload(struct i1480 *); +extern ssize_t i1480_cmd(struct i1480 *, const char *, size_t, size_t); +extern int i1480_rceb_check(const struct i1480 *, + const struct uwb_rceb *, const char *, u8, + u8, unsigned); + +enum { + /* Vendor specific command type */ + i1480_CET_VS1 = 0xfd, + /* i1480 commands */ + i1480_CMD_SET_IP_MAS = 0x000e, + i1480_CMD_GET_MAC_PHY_INFO = 0x0003, + i1480_CMD_MPI_WRITE = 0x000f, + i1480_CMD_MPI_READ = 0x0010, + /* i1480 events */ +#if i1480_FW > 0x00000302 + i1480_EVT_CONFIRM = 0x0002, + i1480_EVT_RM_INIT_DONE = 0x0101, + i1480_EVT_DEV_ADD = 0x0103, + i1480_EVT_DEV_RM = 0x0104, + i1480_EVT_DEV_ID_CHANGE = 0x0105, + i1480_EVT_GET_MAC_PHY_INFO = i1480_CMD_GET_MAC_PHY_INFO, +#else + i1480_EVT_CONFIRM = 0x0002, + i1480_EVT_RM_INIT_DONE = 0x0101, + i1480_EVT_DEV_ADD = 0x0103, + i1480_EVT_DEV_RM = 0x0104, + i1480_EVT_DEV_ID_CHANGE = 0x0105, + i1480_EVT_GET_MAC_PHY_INFO = i1480_EVT_CONFIRM, +#endif +}; + + +struct i1480_evt_confirm { + struct uwb_rceb rceb; +#ifdef i1480_RCEB_EXTENDED + __le16 wParamLength; +#endif + u8 bResultCode; +} __attribute__((packed)); + + +struct i1480_rceb { + struct uwb_rceb rceb; +#ifdef i1480_RCEB_EXTENDED + __le16 wParamLength; +#endif +} __attribute__((packed)); + + +/** + * Get MAC & PHY Information confirm event structure + * + * Confirm event returned by the command. + */ +struct i1480_evt_confirm_GMPI { +#if i1480_FW > 0x00000302 + struct uwb_rceb rceb; + __le16 wParamLength; + __le16 status; + u8 mac_addr[6]; /* EUI-64 bit IEEE address [still 8 bytes?] */ + u8 dev_addr[2]; + __le16 mac_fw_rev; /* major = v >> 8; minor = v & 0xff */ + u8 hw_rev; + u8 phy_vendor; + u8 phy_rev; /* major v = >> 8; minor = v & 0xff */ + __le16 mac_caps; + u8 phy_caps[3]; + u8 key_stores; + __le16 mcast_addr_stores; + u8 sec_mode_supported; +#else + struct uwb_rceb rceb; + u8 status; + u8 mac_addr[8]; /* EUI-64 bit IEEE address [still 8 bytes?] */ + u8 dev_addr[2]; + __le16 mac_fw_rev; /* major = v >> 8; minor = v & 0xff */ + __le16 phy_fw_rev; /* major v = >> 8; minor = v & 0xff */ + __le16 mac_caps; + u8 phy_caps; + u8 key_stores; + __le16 mcast_addr_stores; + u8 sec_mode_supported; +#endif +} __attribute__((packed)); + + +struct i1480_cmd_mpi_write { + struct uwb_rccb rccb; + __le16 size; + u8 data[]; +}; + + +struct i1480_cmd_mpi_read { + struct uwb_rccb rccb; + __le16 size; + struct { + u8 page, offset; + } __attribute__((packed)) data[]; +} __attribute__((packed)); + + +struct i1480_evt_mpi_read { + struct uwb_rceb rceb; +#ifdef i1480_RCEB_EXTENDED + __le16 wParamLength; +#endif + u8 bResultCode; + __le16 size; + struct { + u8 page, offset, value; + } __attribute__((packed)) data[]; +} __attribute__((packed)); + + +#endif /* #ifndef __i1480_DFU_H__ */ diff --git a/drivers/uwb/i1480/dfu/mac.c b/drivers/uwb/i1480/dfu/mac.c new file mode 100644 index 000000000000..2e4d8f07c165 --- /dev/null +++ b/drivers/uwb/i1480/dfu/mac.c @@ -0,0 +1,527 @@ +/* + * Intel Wireless UWB Link 1480 + * MAC Firmware upload implementation + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Implementation of the code for parsing the firmware file (extract + * the headers and binary code chunks) in the fw_*() functions. The + * code to upload pre and mac firmwares is the same, so it uses a + * common entry point in __mac_fw_upload(), which uses the i1480 + * function pointers to push the firmware to the device. + */ +#include <linux/delay.h> +#include <linux/firmware.h> +#include <linux/uwb.h> +#include "i1480-dfu.h" + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +/* + * Descriptor for a continuous segment of MAC fw data + */ +struct fw_hdr { + unsigned long address; + size_t length; + const u32 *bin; + struct fw_hdr *next; +}; + + +/* Free a chain of firmware headers */ +static +void fw_hdrs_free(struct fw_hdr *hdr) +{ + struct fw_hdr *next; + + while (hdr) { + next = hdr->next; + kfree(hdr); + hdr = next; + } +} + + +/* Fill a firmware header descriptor from a memory buffer */ +static +int fw_hdr_load(struct i1480 *i1480, struct fw_hdr *hdr, unsigned hdr_cnt, + const char *_data, const u32 *data_itr, const u32 *data_top) +{ + size_t hdr_offset = (const char *) data_itr - _data; + size_t remaining_size = (void *) data_top - (void *) data_itr; + if (data_itr + 2 > data_top) { + dev_err(i1480->dev, "fw hdr #%u/%zu: EOF reached in header at " + "offset %zu, limit %zu\n", + hdr_cnt, hdr_offset, + (const char *) data_itr + 2 - _data, + (const char *) data_top - _data); + return -EINVAL; + } + hdr->next = NULL; + hdr->address = le32_to_cpu(*data_itr++); + hdr->length = le32_to_cpu(*data_itr++); + hdr->bin = data_itr; + if (hdr->length > remaining_size) { + dev_err(i1480->dev, "fw hdr #%u/%zu: EOF reached in data; " + "chunk too long (%zu bytes), only %zu left\n", + hdr_cnt, hdr_offset, hdr->length, remaining_size); + return -EINVAL; + } + return 0; +} + + +/** + * Get a buffer where the firmware is supposed to be and create a + * chain of headers linking them together. + * + * @phdr: where to place the pointer to the first header (headers link + * to the next via the @hdr->next ptr); need to free the whole + * chain when done. + * + * @_data: Pointer to the data buffer. + * + * @_data_size: Size of the data buffer (bytes); data size has to be a + * multiple of 4. Function will fail if not. + * + * Goes over the whole binary blob; reads the first chunk and creates + * a fw hdr from it (which points to where the data is in @_data and + * the length of the chunk); then goes on to the next chunk until + * done. Each header is linked to the next. + */ +static +int fw_hdrs_load(struct i1480 *i1480, struct fw_hdr **phdr, + const char *_data, size_t data_size) +{ + int result; + unsigned hdr_cnt = 0; + u32 *data = (u32 *) _data, *data_itr, *data_top; + struct fw_hdr *hdr, **prev_hdr = phdr; + + result = -EINVAL; + /* Check size is ok and pointer is aligned */ + if (data_size % sizeof(u32) != 0) + goto error; + if ((unsigned long) _data % sizeof(u16) != 0) + goto error; + *phdr = NULL; + data_itr = data; + data_top = (u32 *) (_data + data_size); + while (data_itr < data_top) { + result = -ENOMEM; + hdr = kmalloc(sizeof(*hdr), GFP_KERNEL); + if (hdr == NULL) { + dev_err(i1480->dev, "Cannot allocate fw header " + "for chunk #%u\n", hdr_cnt); + goto error_alloc; + } + result = fw_hdr_load(i1480, hdr, hdr_cnt, + _data, data_itr, data_top); + if (result < 0) + goto error_load; + data_itr += 2 + hdr->length; + *prev_hdr = hdr; + prev_hdr = &hdr->next; + hdr_cnt++; + }; + *prev_hdr = NULL; + return 0; + +error_load: + kfree(hdr); +error_alloc: + fw_hdrs_free(*phdr); +error: + return result; +} + + +/** + * Compares a chunk of fw with one in the devices's memory + * + * @i1480: Device instance + * @hdr: Pointer to the firmware chunk + * @returns: 0 if equal, < 0 errno on error. If > 0, it is the offset + * where the difference was found (plus one). + * + * Kind of dirty and simplistic, but does the trick in both the PCI + * and USB version. We do a quick[er] memcmp(), and if it fails, we do + * a byte-by-byte to find the offset. + */ +static +ssize_t i1480_fw_cmp(struct i1480 *i1480, struct fw_hdr *hdr) +{ + ssize_t result = 0; + u32 src_itr = 0, cnt; + size_t size = hdr->length*sizeof(hdr->bin[0]); + size_t chunk_size; + u8 *bin = (u8 *) hdr->bin; + + while (size > 0) { + chunk_size = size < i1480->buf_size ? size : i1480->buf_size; + result = i1480->read(i1480, hdr->address + src_itr, chunk_size); + if (result < 0) { + dev_err(i1480->dev, "error reading for verification: " + "%zd\n", result); + goto error; + } + if (memcmp(i1480->cmd_buf, bin + src_itr, result)) { + u8 *buf = i1480->cmd_buf; + d_printf(2, i1480->dev, + "original data @ %p + %u, %zu bytes\n", + bin, src_itr, result); + d_dump(4, i1480->dev, bin + src_itr, result); + for (cnt = 0; cnt < result; cnt++) + if (bin[src_itr + cnt] != buf[cnt]) { + dev_err(i1480->dev, "byte failed at " + "src_itr %u cnt %u [0x%02x " + "vs 0x%02x]\n", src_itr, cnt, + bin[src_itr + cnt], buf[cnt]); + result = src_itr + cnt + 1; + goto cmp_failed; + } + } + src_itr += result; + size -= result; + } + result = 0; +error: +cmp_failed: + return result; +} + + +/** + * Writes firmware headers to the device. + * + * @prd: PRD instance + * @hdr: Processed firmware + * @returns: 0 if ok, < 0 errno on error. + */ +static +int mac_fw_hdrs_push(struct i1480 *i1480, struct fw_hdr *hdr, + const char *fw_name, const char *fw_tag) +{ + struct device *dev = i1480->dev; + ssize_t result = 0; + struct fw_hdr *hdr_itr; + int verif_retry_count; + + d_fnstart(3, dev, "(%p, %p)\n", i1480, hdr); + /* Now, header by header, push them to the hw */ + for (hdr_itr = hdr; hdr_itr != NULL; hdr_itr = hdr_itr->next) { + verif_retry_count = 0; +retry: + dev_dbg(dev, "fw chunk (%zu @ 0x%08lx)\n", + hdr_itr->length * sizeof(hdr_itr->bin[0]), + hdr_itr->address); + result = i1480->write(i1480, hdr_itr->address, hdr_itr->bin, + hdr_itr->length*sizeof(hdr_itr->bin[0])); + if (result < 0) { + dev_err(dev, "%s fw '%s': write failed (%zuB @ 0x%lx):" + " %zd\n", fw_tag, fw_name, + hdr_itr->length * sizeof(hdr_itr->bin[0]), + hdr_itr->address, result); + break; + } + result = i1480_fw_cmp(i1480, hdr_itr); + if (result < 0) { + dev_err(dev, "%s fw '%s': verification read " + "failed (%zuB @ 0x%lx): %zd\n", + fw_tag, fw_name, + hdr_itr->length * sizeof(hdr_itr->bin[0]), + hdr_itr->address, result); + break; + } + if (result > 0) { /* Offset where it failed + 1 */ + result--; + dev_err(dev, "%s fw '%s': WARNING: verification " + "failed at 0x%lx: retrying\n", + fw_tag, fw_name, hdr_itr->address + result); + if (++verif_retry_count < 3) + goto retry; /* write this block again! */ + dev_err(dev, "%s fw '%s': verification failed at 0x%lx: " + "tried %d times\n", fw_tag, fw_name, + hdr_itr->address + result, verif_retry_count); + result = -EINVAL; + break; + } + } + d_fnend(3, dev, "(%zd)\n", result); + return result; +} + + +/** Puts the device in firmware upload mode.*/ +static +int mac_fw_upload_enable(struct i1480 *i1480) +{ + int result; + u32 reg = 0x800000c0; + u32 *buffer = (u32 *)i1480->cmd_buf; + + if (i1480->hw_rev > 1) + reg = 0x8000d0d4; + result = i1480->read(i1480, reg, sizeof(u32)); + if (result < 0) + goto error_cmd; + *buffer &= ~i1480_FW_UPLOAD_MODE_MASK; + result = i1480->write(i1480, reg, buffer, sizeof(u32)); + if (result < 0) + goto error_cmd; + return 0; +error_cmd: + dev_err(i1480->dev, "can't enable fw upload mode: %d\n", result); + return result; +} + + +/** Gets the device out of firmware upload mode. */ +static +int mac_fw_upload_disable(struct i1480 *i1480) +{ + int result; + u32 reg = 0x800000c0; + u32 *buffer = (u32 *)i1480->cmd_buf; + + if (i1480->hw_rev > 1) + reg = 0x8000d0d4; + result = i1480->read(i1480, reg, sizeof(u32)); + if (result < 0) + goto error_cmd; + *buffer |= i1480_FW_UPLOAD_MODE_MASK; + result = i1480->write(i1480, reg, buffer, sizeof(u32)); + if (result < 0) + goto error_cmd; + return 0; +error_cmd: + dev_err(i1480->dev, "can't disable fw upload mode: %d\n", result); + return result; +} + + + +/** + * Generic function for uploading a MAC firmware. + * + * @i1480: Device instance + * @fw_name: Name of firmware file to upload. + * @fw_tag: Name of the firmware type (for messages) + * [eg: MAC, PRE] + * @do_wait: Wait for device to emit initialization done message (0 + * for PRE fws, 1 for MAC fws). + * @returns: 0 if ok, < 0 errno on error. + */ +static +int __mac_fw_upload(struct i1480 *i1480, const char *fw_name, + const char *fw_tag) +{ + int result; + const struct firmware *fw; + struct fw_hdr *fw_hdrs; + + d_fnstart(3, i1480->dev, "(%p, %s, %s)\n", i1480, fw_name, fw_tag); + result = request_firmware(&fw, fw_name, i1480->dev); + if (result < 0) /* Up to caller to complain on -ENOENT */ + goto out; + d_printf(3, i1480->dev, "%s fw '%s': uploading\n", fw_tag, fw_name); + result = fw_hdrs_load(i1480, &fw_hdrs, fw->data, fw->size); + if (result < 0) { + dev_err(i1480->dev, "%s fw '%s': failed to parse firmware " + "file: %d\n", fw_tag, fw_name, result); + goto out_release; + } + result = mac_fw_upload_enable(i1480); + if (result < 0) + goto out_hdrs_release; + result = mac_fw_hdrs_push(i1480, fw_hdrs, fw_name, fw_tag); + mac_fw_upload_disable(i1480); +out_hdrs_release: + if (result >= 0) + dev_info(i1480->dev, "%s fw '%s': uploaded\n", fw_tag, fw_name); + else + dev_err(i1480->dev, "%s fw '%s': failed to upload (%d), " + "power cycle device\n", fw_tag, fw_name, result); + fw_hdrs_free(fw_hdrs); +out_release: + release_firmware(fw); +out: + d_fnend(3, i1480->dev, "(%p, %s, %s) = %d\n", i1480, fw_name, fw_tag, + result); + return result; +} + + +/** + * Upload a pre-PHY firmware + * + */ +int i1480_pre_fw_upload(struct i1480 *i1480) +{ + int result; + result = __mac_fw_upload(i1480, i1480->pre_fw_name, "PRE"); + if (result == 0) + msleep(400); + return result; +} + + +/** + * Reset a the MAC and PHY + * + * @i1480: Device's instance + * @returns: 0 if ok, < 0 errno code on error + * + * We put the command on kmalloc'ed memory as some arches cannot do + * USB from the stack. The reply event is copied from an stage buffer, + * so it can be in the stack. See WUSB1.0[8.6.2.4] for more details. + * + * We issue the reset to make sure the UWB controller reinits the PHY; + * this way we can now if the PHY init went ok. + */ +static +int i1480_cmd_reset(struct i1480 *i1480) +{ + int result; + struct uwb_rccb *cmd = (void *) i1480->cmd_buf; + struct i1480_evt_reset { + struct uwb_rceb rceb; + u8 bResultCode; + } __attribute__((packed)) *reply = (void *) i1480->evt_buf; + + result = -ENOMEM; + cmd->bCommandType = UWB_RC_CET_GENERAL; + cmd->wCommand = cpu_to_le16(UWB_RC_CMD_RESET); + reply->rceb.bEventType = UWB_RC_CET_GENERAL; + reply->rceb.wEvent = UWB_RC_CMD_RESET; + result = i1480_cmd(i1480, "RESET", sizeof(*cmd), sizeof(*reply)); + if (result < 0) + goto out; + if (reply->bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(i1480->dev, "RESET: command execution failed: %u\n", + reply->bResultCode); + result = -EIO; + } +out: + return result; + +} + + +/* Wait for the MAC FW to start running */ +static +int i1480_fw_is_running_q(struct i1480 *i1480) +{ + int cnt = 0; + int result; + u32 *val = (u32 *) i1480->cmd_buf; + + d_fnstart(3, i1480->dev, "(i1480 %p)\n", i1480); + for (cnt = 0; cnt < 10; cnt++) { + msleep(100); + result = i1480->read(i1480, 0x80080000, 4); + if (result < 0) { + dev_err(i1480->dev, "Can't read 0x8008000: %d\n", result); + goto out; + } + if (*val == 0x55555555UL) /* fw running? cool */ + goto out; + } + dev_err(i1480->dev, "Timed out waiting for fw to start\n"); + result = -ETIMEDOUT; +out: + d_fnend(3, i1480->dev, "(i1480 %p) = %d\n", i1480, result); + return result; + +} + + +/** + * Upload MAC firmware, wait for it to start + * + * @i1480: Device instance + * @fw_name: Name of the file that contains the firmware + * + * This has to be called after the pre fw has been uploaded (if + * there is any). + */ +int i1480_mac_fw_upload(struct i1480 *i1480) +{ + int result = 0, deprecated_name = 0; + struct i1480_rceb *rcebe = (void *) i1480->evt_buf; + + d_fnstart(3, i1480->dev, "(%p)\n", i1480); + result = __mac_fw_upload(i1480, i1480->mac_fw_name, "MAC"); + if (result == -ENOENT) { + result = __mac_fw_upload(i1480, i1480->mac_fw_name_deprecate, + "MAC"); + deprecated_name = 1; + } + if (result < 0) + return result; + if (deprecated_name == 1) + dev_warn(i1480->dev, + "WARNING: firmware file name %s is deprecated, " + "please rename to %s\n", + i1480->mac_fw_name_deprecate, i1480->mac_fw_name); + result = i1480_fw_is_running_q(i1480); + if (result < 0) + goto error_fw_not_running; + result = i1480->rc_setup ? i1480->rc_setup(i1480) : 0; + if (result < 0) { + dev_err(i1480->dev, "Cannot setup after MAC fw upload: %d\n", + result); + goto error_setup; + } + result = i1480->wait_init_done(i1480); /* wait init'on */ + if (result < 0) { + dev_err(i1480->dev, "MAC fw '%s': Initialization timed out " + "(%d)\n", i1480->mac_fw_name, result); + goto error_init_timeout; + } + /* verify we got the right initialization done event */ + if (i1480->evt_result != sizeof(*rcebe)) { + dev_err(i1480->dev, "MAC fw '%s': initialization event returns " + "wrong size (%zu bytes vs %zu needed)\n", + i1480->mac_fw_name, i1480->evt_result, sizeof(*rcebe)); + dump_bytes(i1480->dev, rcebe, min(i1480->evt_result, (ssize_t)32)); + goto error_size; + } + result = -EIO; + if (i1480_rceb_check(i1480, &rcebe->rceb, NULL, 0, i1480_CET_VS1, + i1480_EVT_RM_INIT_DONE) < 0) { + dev_err(i1480->dev, "wrong initialization event 0x%02x/%04x/%02x " + "received; expected 0x%02x/%04x/00\n", + rcebe->rceb.bEventType, le16_to_cpu(rcebe->rceb.wEvent), + rcebe->rceb.bEventContext, i1480_CET_VS1, + i1480_EVT_RM_INIT_DONE); + goto error_init_timeout; + } + result = i1480_cmd_reset(i1480); + if (result < 0) + dev_err(i1480->dev, "MAC fw '%s': MBOA reset failed (%d)\n", + i1480->mac_fw_name, result); +error_fw_not_running: +error_init_timeout: +error_size: +error_setup: + d_fnend(3, i1480->dev, "(i1480 %p) = %d\n", i1480, result); + return result; +} diff --git a/drivers/uwb/i1480/dfu/phy.c b/drivers/uwb/i1480/dfu/phy.c new file mode 100644 index 000000000000..3b1a87de8e63 --- /dev/null +++ b/drivers/uwb/i1480/dfu/phy.c @@ -0,0 +1,203 @@ +/* + * Intel Wireless UWB Link 1480 + * PHY parameters upload + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Code for uploading the PHY parameters to the PHY through the UWB + * Radio Control interface. + * + * We just send the data through the MPI interface using HWA-like + * commands and then reset the PHY to make sure it is ok. + */ +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/firmware.h> +#include <linux/usb/wusb.h> +#include "i1480-dfu.h" + + +/** + * Write a value array to an address of the MPI interface + * + * @i1480: Device descriptor + * @data: Data array to write + * @size: Size of the data array + * @returns: 0 if ok, < 0 errno code on error. + * + * The data array is organized into pairs: + * + * ADDRESS VALUE + * + * ADDRESS is BE 16 bit unsigned, VALUE 8 bit unsigned. Size thus has + * to be a multiple of three. + */ +static +int i1480_mpi_write(struct i1480 *i1480, const void *data, size_t size) +{ + int result; + struct i1480_cmd_mpi_write *cmd = i1480->cmd_buf; + struct i1480_evt_confirm *reply = i1480->evt_buf; + + BUG_ON(size > 480); + result = -ENOMEM; + cmd->rccb.bCommandType = i1480_CET_VS1; + cmd->rccb.wCommand = cpu_to_le16(i1480_CMD_MPI_WRITE); + cmd->size = cpu_to_le16(size); + memcpy(cmd->data, data, size); + reply->rceb.bEventType = i1480_CET_VS1; + reply->rceb.wEvent = i1480_CMD_MPI_WRITE; + result = i1480_cmd(i1480, "MPI-WRITE", sizeof(*cmd) + size, sizeof(*reply)); + if (result < 0) + goto out; + if (reply->bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(i1480->dev, "MPI-WRITE: command execution failed: %d\n", + reply->bResultCode); + result = -EIO; + } +out: + return result; +} + + +/** + * Read a value array to from an address of the MPI interface + * + * @i1480: Device descriptor + * @data: where to place the read array + * @srcaddr: Where to read from + * @size: Size of the data read array + * @returns: 0 if ok, < 0 errno code on error. + * + * The command data array is organized into pairs ADDR0 ADDR1..., and + * the returned data in ADDR0 VALUE0 ADDR1 VALUE1... + * + * We generate the command array to be a sequential read and then + * rearrange the result. + * + * We use the i1480->cmd_buf for the command, i1480->evt_buf for the reply. + * + * As the reply has to fit in 512 bytes (i1480->evt_buffer), the max amount + * of values we can read is (512 - sizeof(*reply)) / 3 + */ +static +int i1480_mpi_read(struct i1480 *i1480, u8 *data, u16 srcaddr, size_t size) +{ + int result; + struct i1480_cmd_mpi_read *cmd = i1480->cmd_buf; + struct i1480_evt_mpi_read *reply = i1480->evt_buf; + unsigned cnt; + + memset(i1480->cmd_buf, 0x69, 512); + memset(i1480->evt_buf, 0x69, 512); + + BUG_ON(size > (i1480->buf_size - sizeof(*reply)) / 3); + result = -ENOMEM; + cmd->rccb.bCommandType = i1480_CET_VS1; + cmd->rccb.wCommand = cpu_to_le16(i1480_CMD_MPI_READ); + cmd->size = cpu_to_le16(3*size); + for (cnt = 0; cnt < size; cnt++) { + cmd->data[cnt].page = (srcaddr + cnt) >> 8; + cmd->data[cnt].offset = (srcaddr + cnt) & 0xff; + } + reply->rceb.bEventType = i1480_CET_VS1; + reply->rceb.wEvent = i1480_CMD_MPI_READ; + result = i1480_cmd(i1480, "MPI-READ", sizeof(*cmd) + 2*size, + sizeof(*reply) + 3*size); + if (result < 0) + goto out; + if (reply->bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(i1480->dev, "MPI-READ: command execution failed: %d\n", + reply->bResultCode); + result = -EIO; + } + for (cnt = 0; cnt < size; cnt++) { + if (reply->data[cnt].page != (srcaddr + cnt) >> 8) + dev_err(i1480->dev, "MPI-READ: page inconsistency at " + "index %u: expected 0x%02x, got 0x%02x\n", cnt, + (srcaddr + cnt) >> 8, reply->data[cnt].page); + if (reply->data[cnt].offset != ((srcaddr + cnt) & 0x00ff)) + dev_err(i1480->dev, "MPI-READ: offset inconsistency at " + "index %u: expected 0x%02x, got 0x%02x\n", cnt, + (srcaddr + cnt) & 0x00ff, + reply->data[cnt].offset); + data[cnt] = reply->data[cnt].value; + } + result = 0; +out: + return result; +} + + +/** + * Upload a PHY firmware, wait for it to start + * + * @i1480: Device instance + * @fw_name: Name of the file that contains the firmware + * + * We assume the MAC fw is up and running. This means we can use the + * MPI interface to write the PHY firmware. Once done, we issue an + * MBOA Reset, which will force the MAC to reset and reinitialize the + * PHY. If that works, we are ready to go. + * + * Max packet size for the MPI write is 512, so the max buffer is 480 + * (which gives us 160 byte triads of MSB, LSB and VAL for the data). + */ +int i1480_phy_fw_upload(struct i1480 *i1480) +{ + int result; + const struct firmware *fw; + const char *data_itr, *data_top; + const size_t MAX_BLK_SIZE = 480; /* 160 triads */ + size_t data_size; + u8 phy_stat; + + result = request_firmware(&fw, i1480->phy_fw_name, i1480->dev); + if (result < 0) + goto out; + /* Loop writing data in chunks as big as possible until done. */ + for (data_itr = fw->data, data_top = data_itr + fw->size; + data_itr < data_top; data_itr += MAX_BLK_SIZE) { + data_size = min(MAX_BLK_SIZE, (size_t) (data_top - data_itr)); + result = i1480_mpi_write(i1480, data_itr, data_size); + if (result < 0) + goto error_mpi_write; + } + /* Read MPI page 0, offset 6; if 0, PHY was initialized correctly. */ + result = i1480_mpi_read(i1480, &phy_stat, 0x0006, 1); + if (result < 0) { + dev_err(i1480->dev, "PHY: can't get status: %d\n", result); + goto error_mpi_status; + } + if (phy_stat != 0) { + result = -ENODEV; + dev_info(i1480->dev, "error, PHY not ready: %u\n", phy_stat); + goto error_phy_status; + } + dev_info(i1480->dev, "PHY fw '%s': uploaded\n", i1480->phy_fw_name); +error_phy_status: +error_mpi_status: +error_mpi_write: + release_firmware(fw); + if (result < 0) + dev_err(i1480->dev, "PHY fw '%s': failed to upload (%d), " + "power cycle device\n", i1480->phy_fw_name, result); +out: + return result; +} diff --git a/drivers/uwb/i1480/dfu/usb.c b/drivers/uwb/i1480/dfu/usb.c new file mode 100644 index 000000000000..98eeeff051aa --- /dev/null +++ b/drivers/uwb/i1480/dfu/usb.c @@ -0,0 +1,500 @@ +/* + * Intel Wireless UWB Link 1480 + * USB SKU firmware upload implementation + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * This driver will prepare the i1480 device to behave as a real + * Wireless USB HWA adaptor by uploading the firmware. + * + * When the device is connected or driver is loaded, i1480_usb_probe() + * is called--this will allocate and initialize the device structure, + * fill in the pointers to the common functions (read, write, + * wait_init_done and cmd for HWA command execution) and once that is + * done, call the common firmware uploading routine. Then clean up and + * return -ENODEV, as we don't attach to the device. + * + * The rest are the basic ops we implement that the fw upload code + * uses to do its job. All the ops in the common code are i1480->NAME, + * the functions are i1480_usb_NAME(). + */ +#include <linux/module.h> +#include <linux/version.h> +#include <linux/usb.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/uwb.h> +#include <linux/usb/wusb.h> +#include <linux/usb/wusb-wa.h> +#include "i1480-dfu.h" + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + + +struct i1480_usb { + struct i1480 i1480; + struct usb_device *usb_dev; + struct usb_interface *usb_iface; + struct urb *neep_urb; /* URB for reading from EP1 */ +}; + + +static +void i1480_usb_init(struct i1480_usb *i1480_usb) +{ + i1480_init(&i1480_usb->i1480); +} + + +static +int i1480_usb_create(struct i1480_usb *i1480_usb, struct usb_interface *iface) +{ + struct usb_device *usb_dev = interface_to_usbdev(iface); + int result = -ENOMEM; + + i1480_usb->usb_dev = usb_get_dev(usb_dev); /* bind the USB device */ + i1480_usb->usb_iface = usb_get_intf(iface); + usb_set_intfdata(iface, i1480_usb); /* Bind the driver to iface0 */ + i1480_usb->neep_urb = usb_alloc_urb(0, GFP_KERNEL); + if (i1480_usb->neep_urb == NULL) + goto error; + return 0; + +error: + usb_set_intfdata(iface, NULL); + usb_put_intf(iface); + usb_put_dev(usb_dev); + return result; +} + + +static +void i1480_usb_destroy(struct i1480_usb *i1480_usb) +{ + usb_kill_urb(i1480_usb->neep_urb); + usb_free_urb(i1480_usb->neep_urb); + usb_set_intfdata(i1480_usb->usb_iface, NULL); + usb_put_intf(i1480_usb->usb_iface); + usb_put_dev(i1480_usb->usb_dev); +} + + +/** + * Write a buffer to a memory address in the i1480 device + * + * @i1480: i1480 instance + * @memory_address: + * Address where to write the data buffer to. + * @buffer: Buffer to the data + * @size: Size of the buffer [has to be < 512]. + * @returns: 0 if ok, < 0 errno code on error. + * + * Data buffers to USB cannot be on the stack or in vmalloc'ed areas, + * so we copy it to the local i1480 buffer before proceeding. In any + * case, we have a max size we can send, soooo. + */ +static +int i1480_usb_write(struct i1480 *i1480, u32 memory_address, + const void *buffer, size_t size) +{ + int result = 0; + struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480); + size_t buffer_size, itr = 0; + + d_fnstart(3, i1480->dev, "(%p, 0x%08x, %p, %zu)\n", + i1480, memory_address, buffer, size); + BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */ + while (size > 0) { + buffer_size = size < i1480->buf_size ? size : i1480->buf_size; + memcpy(i1480->cmd_buf, buffer + itr, buffer_size); + result = usb_control_msg( + i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0), + 0xf0, USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + cpu_to_le16(memory_address & 0xffff), + cpu_to_le16((memory_address >> 16) & 0xffff), + i1480->cmd_buf, buffer_size, 100 /* FIXME: arbitrary */); + if (result < 0) + break; + d_printf(3, i1480->dev, + "wrote @ 0x%08x %u bytes (of %zu bytes requested)\n", + memory_address, result, buffer_size); + d_dump(4, i1480->dev, i1480->cmd_buf, result); + itr += result; + memory_address += result; + size -= result; + } + d_fnend(3, i1480->dev, "(%p, 0x%08x, %p, %zu) = %d\n", + i1480, memory_address, buffer, size, result); + return result; +} + + +/** + * Read a block [max size 512] of the device's memory to @i1480's buffer. + * + * @i1480: i1480 instance + * @memory_address: + * Address where to read from. + * @size: Size to read. Smaller than or equal to 512. + * @returns: >= 0 number of bytes written if ok, < 0 errno code on error. + * + * NOTE: if the memory address or block is incorrect, you might get a + * stall or a different memory read. Caller has to verify the + * memory address and size passed back in the @neh structure. + */ +static +int i1480_usb_read(struct i1480 *i1480, u32 addr, size_t size) +{ + ssize_t result = 0, bytes = 0; + size_t itr, read_size = i1480->buf_size; + struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480); + + d_fnstart(3, i1480->dev, "(%p, 0x%08x, %zu)\n", + i1480, addr, size); + BUG_ON(size > i1480->buf_size); + BUG_ON(size & 0x3); /* Needs to be a multiple of 4 */ + BUG_ON(read_size > 512); + + if (addr >= 0x8000d200 && addr < 0x8000d400) /* Yeah, HW quirk */ + read_size = 4; + + for (itr = 0; itr < size; itr += read_size) { + size_t itr_addr = addr + itr; + size_t itr_size = min(read_size, size - itr); + result = usb_control_msg( + i1480_usb->usb_dev, usb_rcvctrlpipe(i1480_usb->usb_dev, 0), + 0xf0, USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + cpu_to_le16(itr_addr & 0xffff), + cpu_to_le16((itr_addr >> 16) & 0xffff), + i1480->cmd_buf + itr, itr_size, + 100 /* FIXME: arbitrary */); + if (result < 0) { + dev_err(i1480->dev, "%s: USB read error: %zd\n", + __func__, result); + goto out; + } + if (result != itr_size) { + result = -EIO; + dev_err(i1480->dev, + "%s: partial read got only %zu bytes vs %zu expected\n", + __func__, result, itr_size); + goto out; + } + bytes += result; + } + result = bytes; +out: + d_fnend(3, i1480->dev, "(%p, 0x%08x, %zu) = %zd\n", + i1480, addr, size, result); + if (result > 0) + d_dump(4, i1480->dev, i1480->cmd_buf, result); + return result; +} + + +/** + * Callback for reads on the notification/event endpoint + * + * Just enables the completion read handler. + */ +static +void i1480_usb_neep_cb(struct urb *urb) +{ + struct i1480 *i1480 = urb->context; + struct device *dev = i1480->dev; + + switch (urb->status) { + case 0: + break; + case -ECONNRESET: /* Not an error, but a controlled situation; */ + case -ENOENT: /* (we killed the URB)...so, no broadcast */ + dev_dbg(dev, "NEEP: reset/noent %d\n", urb->status); + break; + case -ESHUTDOWN: /* going away! */ + dev_dbg(dev, "NEEP: down %d\n", urb->status); + break; + default: + dev_err(dev, "NEEP: unknown status %d\n", urb->status); + break; + } + i1480->evt_result = urb->actual_length; + complete(&i1480->evt_complete); + return; +} + + +/** + * Wait for the MAC FW to initialize + * + * MAC FW sends a 0xfd/0101/00 notification to EP1 when done + * initializing. Get that notification into i1480->evt_buf; upper layer + * will verify it. + * + * Set i1480->evt_result with the result of getting the event or its + * size (if succesful). + * + * Delivers the data directly to i1480->evt_buf + */ +static +int i1480_usb_wait_init_done(struct i1480 *i1480) +{ + int result; + struct device *dev = i1480->dev; + struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480); + struct usb_endpoint_descriptor *epd; + + d_fnstart(3, dev, "(%p)\n", i1480); + init_completion(&i1480->evt_complete); + i1480->evt_result = -EINPROGRESS; + epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc; + usb_fill_int_urb(i1480_usb->neep_urb, i1480_usb->usb_dev, + usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress), + i1480->evt_buf, i1480->buf_size, + i1480_usb_neep_cb, i1480, epd->bInterval); + result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL); + if (result < 0) { + dev_err(dev, "init done: cannot submit NEEP read: %d\n", + result); + goto error_submit; + } + /* Wait for the USB callback to get the data */ + result = wait_for_completion_interruptible_timeout( + &i1480->evt_complete, HZ); + if (result <= 0) { + result = result == 0 ? -ETIMEDOUT : result; + goto error_wait; + } + usb_kill_urb(i1480_usb->neep_urb); + d_fnend(3, dev, "(%p) = 0\n", i1480); + return 0; + +error_wait: + usb_kill_urb(i1480_usb->neep_urb); +error_submit: + i1480->evt_result = result; + d_fnend(3, dev, "(%p) = %d\n", i1480, result); + return result; +} + + +/** + * Generic function for issuing commands to the i1480 + * + * @i1480: i1480 instance + * @cmd_name: Name of the command (for error messages) + * @cmd: Pointer to command buffer + * @cmd_size: Size of the command buffer + * @reply: Buffer for the reply event + * @reply_size: Expected size back (including RCEB); the reply buffer + * is assumed to be as big as this. + * @returns: >= 0 size of the returned event data if ok, + * < 0 errno code on error. + * + * Arms the NE handle, issues the command to the device and checks the + * basics of the reply event. + */ +static +int i1480_usb_cmd(struct i1480 *i1480, const char *cmd_name, size_t cmd_size) +{ + int result; + struct device *dev = i1480->dev; + struct i1480_usb *i1480_usb = container_of(i1480, struct i1480_usb, i1480); + struct usb_endpoint_descriptor *epd; + struct uwb_rccb *cmd = i1480->cmd_buf; + u8 iface_no; + + d_fnstart(3, dev, "(%p, %s, %zu)\n", i1480, cmd_name, cmd_size); + /* Post a read on the notification & event endpoint */ + iface_no = i1480_usb->usb_iface->cur_altsetting->desc.bInterfaceNumber; + epd = &i1480_usb->usb_iface->cur_altsetting->endpoint[0].desc; + usb_fill_int_urb( + i1480_usb->neep_urb, i1480_usb->usb_dev, + usb_rcvintpipe(i1480_usb->usb_dev, epd->bEndpointAddress), + i1480->evt_buf, i1480->buf_size, + i1480_usb_neep_cb, i1480, epd->bInterval); + result = usb_submit_urb(i1480_usb->neep_urb, GFP_KERNEL); + if (result < 0) { + dev_err(dev, "%s: cannot submit NEEP read: %d\n", + cmd_name, result); + goto error_submit_ep1; + } + /* Now post the command on EP0 */ + result = usb_control_msg( + i1480_usb->usb_dev, usb_sndctrlpipe(i1480_usb->usb_dev, 0), + WA_EXEC_RC_CMD, + USB_DIR_OUT | USB_RECIP_INTERFACE | USB_TYPE_CLASS, + 0, iface_no, + cmd, cmd_size, + 100 /* FIXME: this is totally arbitrary */); + if (result < 0) { + dev_err(dev, "%s: control request failed: %d\n", + cmd_name, result); + goto error_submit_ep0; + } + d_fnend(3, dev, "(%p, %s, %zu) = %d\n", + i1480, cmd_name, cmd_size, result); + return result; + +error_submit_ep0: + usb_kill_urb(i1480_usb->neep_urb); +error_submit_ep1: + d_fnend(3, dev, "(%p, %s, %zu) = %d\n", + i1480, cmd_name, cmd_size, result); + return result; +} + + +/* + * Probe a i1480 device for uploading firmware. + * + * We attach only to interface #0, which is the radio control interface. + */ +static +int i1480_usb_probe(struct usb_interface *iface, const struct usb_device_id *id) +{ + struct i1480_usb *i1480_usb; + struct i1480 *i1480; + struct device *dev = &iface->dev; + int result; + + result = -ENODEV; + if (iface->cur_altsetting->desc.bInterfaceNumber != 0) { + dev_dbg(dev, "not attaching to iface %d\n", + iface->cur_altsetting->desc.bInterfaceNumber); + goto error; + } + if (iface->num_altsetting > 1 + && interface_to_usbdev(iface)->descriptor.idProduct == 0xbabe) { + /* Need altsetting #1 [HW QUIRK] or EP1 won't work */ + result = usb_set_interface(interface_to_usbdev(iface), 0, 1); + if (result < 0) + dev_warn(dev, + "can't set altsetting 1 on iface 0: %d\n", + result); + } + + result = -ENOMEM; + i1480_usb = kzalloc(sizeof(*i1480_usb), GFP_KERNEL); + if (i1480_usb == NULL) { + dev_err(dev, "Unable to allocate instance\n"); + goto error; + } + i1480_usb_init(i1480_usb); + + i1480 = &i1480_usb->i1480; + i1480->buf_size = 512; + i1480->cmd_buf = kmalloc(2 * i1480->buf_size, GFP_KERNEL); + if (i1480->cmd_buf == NULL) { + dev_err(dev, "Cannot allocate transfer buffers\n"); + result = -ENOMEM; + goto error_buf_alloc; + } + i1480->evt_buf = i1480->cmd_buf + i1480->buf_size; + + result = i1480_usb_create(i1480_usb, iface); + if (result < 0) { + dev_err(dev, "Cannot create instance: %d\n", result); + goto error_create; + } + + /* setup the fops and upload the firmare */ + i1480->pre_fw_name = "i1480-pre-phy-0.0.bin"; + i1480->mac_fw_name = "i1480-usb-0.0.bin"; + i1480->mac_fw_name_deprecate = "ptc-0.0.bin"; + i1480->phy_fw_name = "i1480-phy-0.0.bin"; + i1480->dev = &iface->dev; + i1480->write = i1480_usb_write; + i1480->read = i1480_usb_read; + i1480->rc_setup = NULL; + i1480->wait_init_done = i1480_usb_wait_init_done; + i1480->cmd = i1480_usb_cmd; + + result = i1480_fw_upload(&i1480_usb->i1480); /* the real thing */ + if (result >= 0) { + usb_reset_device(i1480_usb->usb_dev); + result = -ENODEV; /* we don't want to bind to the iface */ + } + i1480_usb_destroy(i1480_usb); +error_create: + kfree(i1480->cmd_buf); +error_buf_alloc: + kfree(i1480_usb); +error: + return result; +} + +#define i1480_USB_DEV(v, p) \ +{ \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE \ + | USB_DEVICE_ID_MATCH_DEV_INFO \ + | USB_DEVICE_ID_MATCH_INT_INFO, \ + .idVendor = (v), \ + .idProduct = (p), \ + .bDeviceClass = 0xff, \ + .bDeviceSubClass = 0xff, \ + .bDeviceProtocol = 0xff, \ + .bInterfaceClass = 0xff, \ + .bInterfaceSubClass = 0xff, \ + .bInterfaceProtocol = 0xff, \ +} + + +/** USB device ID's that we handle */ +static struct usb_device_id i1480_usb_id_table[] = { + i1480_USB_DEV(0x8086, 0xdf3b), + i1480_USB_DEV(0x15a9, 0x0005), + i1480_USB_DEV(0x07d1, 0x3802), + i1480_USB_DEV(0x050d, 0x305a), + i1480_USB_DEV(0x3495, 0x3007), + {}, +}; +MODULE_DEVICE_TABLE(usb, i1480_usb_id_table); + + +static struct usb_driver i1480_dfu_driver = { + .name = "i1480-dfu-usb", + .id_table = i1480_usb_id_table, + .probe = i1480_usb_probe, + .disconnect = NULL, +}; + + +/* + * Initialize the i1480 DFU driver. + * + * We also need to register our function for guessing event sizes. + */ +static int __init i1480_dfu_driver_init(void) +{ + return usb_register(&i1480_dfu_driver); +} +module_init(i1480_dfu_driver_init); + + +static void __exit i1480_dfu_driver_exit(void) +{ + usb_deregister(&i1480_dfu_driver); +} +module_exit(i1480_dfu_driver_exit); + + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("Intel Wireless UWB Link 1480 firmware uploader for USB"); +MODULE_LICENSE("GPL"); diff --git a/drivers/uwb/i1480/i1480-est.c b/drivers/uwb/i1480/i1480-est.c new file mode 100644 index 000000000000..7bf8c6febae7 --- /dev/null +++ b/drivers/uwb/i1480/i1480-est.c @@ -0,0 +1,99 @@ +/* + * Intel Wireless UWB Link 1480 + * Event Size tables for Wired Adaptors + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/usb.h> +#include <linux/uwb.h> +#include "dfu/i1480-dfu.h" + + +/** Event size table for wEvents 0x00XX */ +static struct uwb_est_entry i1480_est_fd00[] = { + /* Anybody expecting this response has to use + * neh->extra_size to specify the real size that will + * come back. */ + [i1480_EVT_CONFIRM] = { .size = sizeof(struct i1480_evt_confirm) }, + [i1480_CMD_SET_IP_MAS] = { .size = sizeof(struct i1480_evt_confirm) }, +#ifdef i1480_RCEB_EXTENDED + [0x09] = { + .size = sizeof(struct i1480_rceb), + .offset = 1 + offsetof(struct i1480_rceb, wParamLength), + }, +#endif +}; + +/** Event size table for wEvents 0x01XX */ +static struct uwb_est_entry i1480_est_fd01[] = { + [0xff & i1480_EVT_RM_INIT_DONE] = { .size = sizeof(struct i1480_rceb) }, + [0xff & i1480_EVT_DEV_ADD] = { .size = sizeof(struct i1480_rceb) + 9 }, + [0xff & i1480_EVT_DEV_RM] = { .size = sizeof(struct i1480_rceb) + 9 }, + [0xff & i1480_EVT_DEV_ID_CHANGE] = { + .size = sizeof(struct i1480_rceb) + 2 }, +}; + +static int i1480_est_init(void) +{ + int result = uwb_est_register(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b, + i1480_est_fd00, + ARRAY_SIZE(i1480_est_fd00)); + if (result < 0) { + printk(KERN_ERR "Can't register EST table fd00: %d\n", result); + return result; + } + result = uwb_est_register(i1480_CET_VS1, 0x01, 0x8086, 0x0c3b, + i1480_est_fd01, ARRAY_SIZE(i1480_est_fd01)); + if (result < 0) { + printk(KERN_ERR "Can't register EST table fd01: %d\n", result); + return result; + } + return 0; +} +module_init(i1480_est_init); + +static void i1480_est_exit(void) +{ + uwb_est_unregister(i1480_CET_VS1, 0x00, 0x8086, 0x0c3b, + i1480_est_fd00, ARRAY_SIZE(i1480_est_fd00)); + uwb_est_unregister(i1480_CET_VS1, 0x01, 0x8086, 0x0c3b, + i1480_est_fd01, ARRAY_SIZE(i1480_est_fd01)); +} +module_exit(i1480_est_exit); + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("i1480's Vendor Specific Event Size Tables"); +MODULE_LICENSE("GPL"); + +/** + * USB device ID's that we handle + * + * [so we are loaded when this kind device is connected] + */ +static struct usb_device_id i1480_est_id_table[] = { + { USB_DEVICE(0x8086, 0xdf3b), }, + { USB_DEVICE(0x8086, 0x0c3b), }, + { }, +}; +MODULE_DEVICE_TABLE(usb, i1480_est_id_table); diff --git a/drivers/uwb/i1480/i1480-wlp.h b/drivers/uwb/i1480/i1480-wlp.h new file mode 100644 index 000000000000..18a8b0e4567b --- /dev/null +++ b/drivers/uwb/i1480/i1480-wlp.h @@ -0,0 +1,200 @@ +/* + * Intel 1480 Wireless UWB Link + * WLP specific definitions + * + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#ifndef __i1480_wlp_h__ +#define __i1480_wlp_h__ + +#include <linux/spinlock.h> +#include <linux/list.h> +#include <linux/uwb.h> +#include <linux/if_ether.h> +#include <asm/byteorder.h> + +/* New simplified header format? */ +#undef WLP_HDR_FMT_2 /* FIXME: rename */ + +/** + * Values of the Delivery ID & Type field when PCA or DRP + * + * The Delivery ID & Type field in the WLP TX header indicates whether + * the frame is PCA or DRP. This is done based on the high level bit of + * this field. + * We use this constant to test if the traffic is PCA or DRP as follows: + * if (wlp_tx_hdr_delivery_id_type(wlp_tx_hdr) & WLP_DRP) + * this is DRP traffic + * else + * this is PCA traffic + */ +enum deliver_id_type_bit { + WLP_DRP = 8, +}; + +/** + * WLP TX header + * + * Indicates UWB/WLP-specific transmission parameters for a network + * packet. + */ +struct wlp_tx_hdr { + /* dword 0 */ + struct uwb_dev_addr dstaddr; + u8 key_index; + u8 mac_params; + /* dword 1 */ + u8 phy_params; +#ifndef WLP_HDR_FMT_2 + u8 reserved; + __le16 oui01; /* FIXME: not so sure if __le16 or u8[2] */ + /* dword 2 */ + u8 oui2; /* if all LE, it could be merged */ + __le16 prid; +#endif +} __attribute__((packed)); + +static inline int wlp_tx_hdr_delivery_id_type(const struct wlp_tx_hdr *hdr) +{ + return hdr->mac_params & 0x0f; +} + +static inline int wlp_tx_hdr_ack_policy(const struct wlp_tx_hdr *hdr) +{ + return (hdr->mac_params >> 4) & 0x07; +} + +static inline int wlp_tx_hdr_rts_cts(const struct wlp_tx_hdr *hdr) +{ + return (hdr->mac_params >> 7) & 0x01; +} + +static inline void wlp_tx_hdr_set_delivery_id_type(struct wlp_tx_hdr *hdr, int id) +{ + hdr->mac_params = (hdr->mac_params & ~0x0f) | id; +} + +static inline void wlp_tx_hdr_set_ack_policy(struct wlp_tx_hdr *hdr, + enum uwb_ack_pol policy) +{ + hdr->mac_params = (hdr->mac_params & ~0x70) | (policy << 4); +} + +static inline void wlp_tx_hdr_set_rts_cts(struct wlp_tx_hdr *hdr, int rts_cts) +{ + hdr->mac_params = (hdr->mac_params & ~0x80) | (rts_cts << 7); +} + +static inline enum uwb_phy_rate wlp_tx_hdr_phy_rate(const struct wlp_tx_hdr *hdr) +{ + return hdr->phy_params & 0x0f; +} + +static inline int wlp_tx_hdr_tx_power(const struct wlp_tx_hdr *hdr) +{ + return (hdr->phy_params >> 4) & 0x0f; +} + +static inline void wlp_tx_hdr_set_phy_rate(struct wlp_tx_hdr *hdr, enum uwb_phy_rate rate) +{ + hdr->phy_params = (hdr->phy_params & ~0x0f) | rate; +} + +static inline void wlp_tx_hdr_set_tx_power(struct wlp_tx_hdr *hdr, int pwr) +{ + hdr->phy_params = (hdr->phy_params & ~0xf0) | (pwr << 4); +} + + +/** + * WLP RX header + * + * Provides UWB/WLP-specific transmission data for a received + * network packet. + */ +struct wlp_rx_hdr { + /* dword 0 */ + struct uwb_dev_addr dstaddr; + struct uwb_dev_addr srcaddr; + /* dword 1 */ + u8 LQI; + s8 RSSI; + u8 reserved3; +#ifndef WLP_HDR_FMT_2 + u8 oui0; + /* dword 2 */ + __le16 oui12; + __le16 prid; +#endif +} __attribute__((packed)); + + +/** User configurable options for WLP */ +struct wlp_options { + struct mutex mutex; /* access to user configurable options*/ + struct wlp_tx_hdr def_tx_hdr; /* default tx hdr */ + u8 pca_base_priority; + u8 bw_alloc; /*index into bw_allocs[] for PCA/DRP reservations*/ +}; + + +static inline +void wlp_options_init(struct wlp_options *options) +{ + mutex_init(&options->mutex); + wlp_tx_hdr_set_ack_policy(&options->def_tx_hdr, UWB_ACK_INM); + wlp_tx_hdr_set_rts_cts(&options->def_tx_hdr, 1); + /* FIXME: default to phy caps */ + wlp_tx_hdr_set_phy_rate(&options->def_tx_hdr, UWB_PHY_RATE_480); +#ifndef WLP_HDR_FMT_2 + options->def_tx_hdr.prid = cpu_to_le16(0x0000); +#endif +} + + +/* sysfs helpers */ + +extern ssize_t uwb_pca_base_priority_store(struct wlp_options *, + const char *, size_t); +extern ssize_t uwb_pca_base_priority_show(const struct wlp_options *, char *); +extern ssize_t uwb_bw_alloc_store(struct wlp_options *, const char *, size_t); +extern ssize_t uwb_bw_alloc_show(const struct wlp_options *, char *); +extern ssize_t uwb_ack_policy_store(struct wlp_options *, + const char *, size_t); +extern ssize_t uwb_ack_policy_show(const struct wlp_options *, char *); +extern ssize_t uwb_rts_cts_store(struct wlp_options *, const char *, size_t); +extern ssize_t uwb_rts_cts_show(const struct wlp_options *, char *); +extern ssize_t uwb_phy_rate_store(struct wlp_options *, const char *, size_t); +extern ssize_t uwb_phy_rate_show(const struct wlp_options *, char *); + + +/** Simple bandwidth allocation (temporary and too simple) */ +struct wlp_bw_allocs { + const char *name; + struct { + u8 mask, stream; + } tx, rx; +}; + + +#endif /* #ifndef __i1480_wlp_h__ */ diff --git a/drivers/uwb/i1480/i1480u-wlp/Makefile b/drivers/uwb/i1480/i1480u-wlp/Makefile new file mode 100644 index 000000000000..fe6709b8e68b --- /dev/null +++ b/drivers/uwb/i1480/i1480u-wlp/Makefile @@ -0,0 +1,8 @@ +obj-$(CONFIG_UWB_I1480U_WLP) += i1480u-wlp.o + +i1480u-wlp-objs := \ + lc.o \ + netdev.o \ + rx.o \ + sysfs.o \ + tx.o diff --git a/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h b/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h new file mode 100644 index 000000000000..5f1b2951bb83 --- /dev/null +++ b/drivers/uwb/i1480/i1480u-wlp/i1480u-wlp.h @@ -0,0 +1,284 @@ +/* + * Intel 1480 Wireless UWB Link USB + * Header formats, constants, general internal interfaces + * + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * This is not an standard interface. + * + * FIXME: docs + * + * i1480u-wlp is pretty simple: two endpoints, one for tx, one for + * rx. rx is polled. Network packets (ethernet, whatever) are wrapped + * in i1480 TX or RX headers (for sending over the air), and these + * packets are wrapped in UNTD headers (for sending to the WLP UWB + * controller). + * + * UNTD packets (UNTD hdr + i1480 hdr + network packet) packets + * cannot be bigger than i1480u_MAX_FRG_SIZE. When this happens, the + * i1480 packet is broken in chunks/packets: + * + * UNTD-1st.hdr + i1480.hdr + payload + * UNTD-next.hdr + payload + * ... + * UNTD-last.hdr + payload + * + * so that each packet is smaller or equal than i1480u_MAX_FRG_SIZE. + * + * All HW structures and bitmaps are little endian, so we need to play + * ugly tricks when defining bitfields. Hoping for the day GCC + * implements __attribute__((endian(1234))). + * + * FIXME: ROADMAP to the whole implementation + */ + +#ifndef __i1480u_wlp_h__ +#define __i1480u_wlp_h__ + +#include <linux/usb.h> +#include <linux/netdevice.h> +#include <linux/uwb.h> /* struct uwb_rc, struct uwb_notifs_handler */ +#include <linux/wlp.h> +#include "../i1480-wlp.h" + +#undef i1480u_FLOW_CONTROL /* Enable flow control code */ + +/** + * Basic flow control + */ +enum { + i1480u_TX_INFLIGHT_MAX = 1000, + i1480u_TX_INFLIGHT_THRESHOLD = 100, +}; + +/** Maximum size of a transaction that we can tx/rx */ +enum { + /* Maximum packet size computed as follows: max UNTD header (8) + + * i1480 RX header (8) + max Ethernet header and payload (4096) + + * Padding added by skb_reserve (2) to make post Ethernet payload + * start on 16 byte boundary*/ + i1480u_MAX_RX_PKT_SIZE = 4114, + i1480u_MAX_FRG_SIZE = 512, + i1480u_RX_BUFS = 9, +}; + + +/** + * UNTD packet type + * + * We need to fragment any payload whose UNTD packet is going to be + * bigger than i1480u_MAX_FRG_SIZE. + */ +enum i1480u_pkt_type { + i1480u_PKT_FRAG_1ST = 0x1, + i1480u_PKT_FRAG_NXT = 0x0, + i1480u_PKT_FRAG_LST = 0x2, + i1480u_PKT_FRAG_CMP = 0x3 +}; +enum { + i1480u_PKT_NONE = 0x4, +}; + +/** USB Network Transfer Descriptor - common */ +struct untd_hdr { + u8 type; + __le16 len; +} __attribute__((packed)); + +static inline enum i1480u_pkt_type untd_hdr_type(const struct untd_hdr *hdr) +{ + return hdr->type & 0x03; +} + +static inline int untd_hdr_rx_tx(const struct untd_hdr *hdr) +{ + return (hdr->type >> 2) & 0x01; +} + +static inline void untd_hdr_set_type(struct untd_hdr *hdr, enum i1480u_pkt_type type) +{ + hdr->type = (hdr->type & ~0x03) | type; +} + +static inline void untd_hdr_set_rx_tx(struct untd_hdr *hdr, int rx_tx) +{ + hdr->type = (hdr->type & ~0x04) | (rx_tx << 2); +} + + +/** + * USB Network Transfer Descriptor - Complete Packet + * + * This is for a packet that is smaller (header + payload) than + * i1480u_MAX_FRG_SIZE. + * + * @hdr.total_len is the size of the payload; the payload doesn't + * count this header nor the padding, but includes the size of i1480 + * header. + */ +struct untd_hdr_cmp { + struct untd_hdr hdr; + u8 padding; +} __attribute__((packed)); + + +/** + * USB Network Transfer Descriptor - First fragment + * + * @hdr.len is the size of the *whole packet* (excluding UNTD + * headers); @fragment_len is the size of the payload (excluding UNTD + * headers, but including i1480 headers). + */ +struct untd_hdr_1st { + struct untd_hdr hdr; + __le16 fragment_len; + u8 padding[3]; +} __attribute__((packed)); + + +/** + * USB Network Transfer Descriptor - Next / Last [Rest] + * + * @hdr.len is the size of the payload, not including headrs. + */ +struct untd_hdr_rst { + struct untd_hdr hdr; + u8 padding; +} __attribute__((packed)); + + +/** + * Transmission context + * + * Wraps all the stuff needed to track a pending/active tx + * operation. + */ +struct i1480u_tx { + struct list_head list_node; + struct i1480u *i1480u; + struct urb *urb; + + struct sk_buff *skb; + struct wlp_tx_hdr *wlp_tx_hdr; + + void *buf; /* if NULL, no new buf was used */ + size_t buf_size; +}; + +/** + * Basic flow control + * + * We maintain a basic flow control counter. "count" how many TX URBs are + * outstanding. Only allow "max" + * TX URBs to be outstanding. If this value is reached the queue will be + * stopped. The queue will be restarted when there are + * "threshold" URBs outstanding. + * Maintain a counter of how many time the TX queue needed to be restarted + * due to the "max" being exceeded and the "threshold" reached again. The + * timestamp "restart_ts" is to keep track from when the counter was last + * queried (see sysfs handling of file wlp_tx_inflight). + */ +struct i1480u_tx_inflight { + atomic_t count; + unsigned long max; + unsigned long threshold; + unsigned long restart_ts; + atomic_t restart_count; +}; + +/** + * Instance of a i1480u WLP interface + * + * Keeps references to the USB device that wraps it, as well as it's + * interface and associated UWB host controller. As well, it also + * keeps a link to the netdevice for integration into the networking + * stack. + * We maintian separate error history for the tx and rx endpoints because + * the implementation does not rely on locking - having one shared + * structure between endpoints may cause problems. Adding locking to the + * implementation will have higher cost than adding a separate structure. + */ +struct i1480u { + struct usb_device *usb_dev; + struct usb_interface *usb_iface; + struct net_device *net_dev; + + spinlock_t lock; + struct net_device_stats stats; + + /* RX context handling */ + struct sk_buff *rx_skb; + struct uwb_dev_addr rx_srcaddr; + size_t rx_untd_pkt_size; + struct i1480u_rx_buf { + struct i1480u *i1480u; /* back pointer */ + struct urb *urb; + struct sk_buff *data; /* i1480u_MAX_RX_PKT_SIZE each */ + } rx_buf[i1480u_RX_BUFS]; /* N bufs */ + + spinlock_t tx_list_lock; /* TX context */ + struct list_head tx_list; + u8 tx_stream; + + struct stats lqe_stats, rssi_stats; /* radio statistics */ + + /* Options we can set from sysfs */ + struct wlp_options options; + struct uwb_notifs_handler uwb_notifs_handler; + struct edc tx_errors; + struct edc rx_errors; + struct wlp wlp; +#ifdef i1480u_FLOW_CONTROL + struct urb *notif_urb; + struct edc notif_edc; /* error density counter */ + u8 notif_buffer[1]; +#endif + struct i1480u_tx_inflight tx_inflight; +}; + +/* Internal interfaces */ +extern void i1480u_rx_cb(struct urb *urb); +extern int i1480u_rx_setup(struct i1480u *); +extern void i1480u_rx_release(struct i1480u *); +extern void i1480u_tx_release(struct i1480u *); +extern int i1480u_xmit_frame(struct wlp *, struct sk_buff *, + struct uwb_dev_addr *); +extern void i1480u_stop_queue(struct wlp *); +extern void i1480u_start_queue(struct wlp *); +extern int i1480u_sysfs_setup(struct i1480u *); +extern void i1480u_sysfs_release(struct i1480u *); + +/* netdev interface */ +extern int i1480u_open(struct net_device *); +extern int i1480u_stop(struct net_device *); +extern int i1480u_hard_start_xmit(struct sk_buff *, struct net_device *); +extern void i1480u_tx_timeout(struct net_device *); +extern int i1480u_set_config(struct net_device *, struct ifmap *); +extern struct net_device_stats *i1480u_get_stats(struct net_device *); +extern int i1480u_change_mtu(struct net_device *, int); +extern void i1480u_uwb_notifs_cb(void *, struct uwb_dev *, enum uwb_notifs); + +/* bandwidth allocation callback */ +extern void i1480u_bw_alloc_cb(struct uwb_rsv *); + +/* Sys FS */ +extern struct attribute_group i1480u_wlp_attr_group; + +#endif /* #ifndef __i1480u_wlp_h__ */ diff --git a/drivers/uwb/i1480/i1480u-wlp/lc.c b/drivers/uwb/i1480/i1480u-wlp/lc.c new file mode 100644 index 000000000000..737d60cd5b73 --- /dev/null +++ b/drivers/uwb/i1480/i1480u-wlp/lc.c @@ -0,0 +1,421 @@ +/* + * WUSB Wire Adapter: WLP interface + * Driver for the Linux Network stack. + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + * + * This implements a very simple network driver for the WLP USB + * device that is associated to a UWB (Ultra Wide Band) host. + * + * This is seen as an interface of a composite device. Once the UWB + * host has an association to another WLP capable device, the + * networking interface (aka WLP) can start to send packets back and + * forth. + * + * Limitations: + * + * - Hand cranked; can't ifup the interface until there is an association + * + * - BW allocation very simplistic [see i1480u_mas_set() and callees]. + * + * + * ROADMAP: + * + * ENTRY POINTS (driver model): + * + * i1480u_driver_{exit,init}(): initialization of the driver. + * + * i1480u_probe(): called by the driver code when a device + * matching 'i1480u_id_table' is connected. + * + * This allocs a netdev instance, inits with + * i1480u_add(), then registers_netdev(). + * i1480u_init() + * i1480u_add() + * + * i1480u_disconnect(): device has been disconnected/module + * is being removed. + * i1480u_rm() + */ +#include <linux/version.h> +#include <linux/if_arp.h> +#include <linux/etherdevice.h> +#include <linux/uwb/debug.h> +#include "i1480u-wlp.h" + + + +static inline +void i1480u_init(struct i1480u *i1480u) +{ + /* nothing so far... doesn't it suck? */ + spin_lock_init(&i1480u->lock); + INIT_LIST_HEAD(&i1480u->tx_list); + spin_lock_init(&i1480u->tx_list_lock); + wlp_options_init(&i1480u->options); + edc_init(&i1480u->tx_errors); + edc_init(&i1480u->rx_errors); +#ifdef i1480u_FLOW_CONTROL + edc_init(&i1480u->notif_edc); +#endif + stats_init(&i1480u->lqe_stats); + stats_init(&i1480u->rssi_stats); + wlp_init(&i1480u->wlp); +} + +/** + * Fill WLP device information structure + * + * The structure will contain a few character arrays, each ending with a + * null terminated string. Each string has to fit (excluding terminating + * character) into a specified range obtained from the WLP substack. + * + * It is still not clear exactly how this device information should be + * obtained. Until we find out we use the USB device descriptor as backup, some + * information elements have intuitive mappings, other not. + */ +static +void i1480u_fill_device_info(struct wlp *wlp, struct wlp_device_info *dev_info) +{ + struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp); + struct usb_device *usb_dev = i1480u->usb_dev; + /* Treat device name and model name the same */ + if (usb_dev->descriptor.iProduct) { + usb_string(usb_dev, usb_dev->descriptor.iProduct, + dev_info->name, sizeof(dev_info->name)); + usb_string(usb_dev, usb_dev->descriptor.iProduct, + dev_info->model_name, sizeof(dev_info->model_name)); + } + if (usb_dev->descriptor.iManufacturer) + usb_string(usb_dev, usb_dev->descriptor.iManufacturer, + dev_info->manufacturer, + sizeof(dev_info->manufacturer)); + scnprintf(dev_info->model_nr, sizeof(dev_info->model_nr), "%04x", + __le16_to_cpu(usb_dev->descriptor.bcdDevice)); + if (usb_dev->descriptor.iSerialNumber) + usb_string(usb_dev, usb_dev->descriptor.iSerialNumber, + dev_info->serial, sizeof(dev_info->serial)); + /* FIXME: where should we obtain category? */ + dev_info->prim_dev_type.category = cpu_to_le16(WLP_DEV_CAT_OTHER); + /* FIXME: Complete OUI and OUIsubdiv attributes */ +} + +#ifdef i1480u_FLOW_CONTROL +/** + * Callback for the notification endpoint + * + * This mostly controls the xon/xoff protocol. In case of hard error, + * we stop the queue. If not, we always retry. + */ +static +void i1480u_notif_cb(struct urb *urb, struct pt_regs *regs) +{ + struct i1480u *i1480u = urb->context; + struct usb_interface *usb_iface = i1480u->usb_iface; + struct device *dev = &usb_iface->dev; + int result; + + switch (urb->status) { + case 0: /* Got valid data, do xon/xoff */ + switch (i1480u->notif_buffer[0]) { + case 'N': + dev_err(dev, "XOFF STOPPING queue at %lu\n", jiffies); + netif_stop_queue(i1480u->net_dev); + break; + case 'A': + dev_err(dev, "XON STARTING queue at %lu\n", jiffies); + netif_start_queue(i1480u->net_dev); + break; + default: + dev_err(dev, "NEP: unknown data 0x%02hhx\n", + i1480u->notif_buffer[0]); + } + break; + case -ECONNRESET: /* Controlled situation ... */ + case -ENOENT: /* we killed the URB... */ + dev_err(dev, "NEP: URB reset/noent %d\n", urb->status); + goto error; + case -ESHUTDOWN: /* going away! */ + dev_err(dev, "NEP: URB down %d\n", urb->status); + goto error; + default: /* Retry unless it gets ugly */ + if (edc_inc(&i1480u->notif_edc, EDC_MAX_ERRORS, + EDC_ERROR_TIMEFRAME)) { + dev_err(dev, "NEP: URB max acceptable errors " + "exceeded; resetting device\n"); + goto error_reset; + } + dev_err(dev, "NEP: URB error %d\n", urb->status); + break; + } + result = usb_submit_urb(urb, GFP_ATOMIC); + if (result < 0) { + dev_err(dev, "NEP: Can't resubmit URB: %d; resetting device\n", + result); + goto error_reset; + } + return; + +error_reset: + wlp_reset_all(&i1480-wlp); +error: + netif_stop_queue(i1480u->net_dev); + return; +} +#endif + +static +int i1480u_add(struct i1480u *i1480u, struct usb_interface *iface) +{ + int result = -ENODEV; + struct wlp *wlp = &i1480u->wlp; + struct usb_device *usb_dev = interface_to_usbdev(iface); + struct net_device *net_dev = i1480u->net_dev; + struct uwb_rc *rc; + struct uwb_dev *uwb_dev; +#ifdef i1480u_FLOW_CONTROL + struct usb_endpoint_descriptor *epd; +#endif + + i1480u->usb_dev = usb_get_dev(usb_dev); + i1480u->usb_iface = iface; + rc = uwb_rc_get_by_grandpa(&i1480u->usb_dev->dev); + if (rc == NULL) { + dev_err(&iface->dev, "Cannot get associated UWB Radio " + "Controller\n"); + goto out; + } + wlp->xmit_frame = i1480u_xmit_frame; + wlp->fill_device_info = i1480u_fill_device_info; + wlp->stop_queue = i1480u_stop_queue; + wlp->start_queue = i1480u_start_queue; + result = wlp_setup(wlp, rc); + if (result < 0) { + dev_err(&iface->dev, "Cannot setup WLP\n"); + goto error_wlp_setup; + } + result = 0; + ether_setup(net_dev); /* make it an etherdevice */ + uwb_dev = &rc->uwb_dev; + /* FIXME: hookup address change notifications? */ + + memcpy(net_dev->dev_addr, uwb_dev->mac_addr.data, + sizeof(net_dev->dev_addr)); + + net_dev->hard_header_len = sizeof(struct untd_hdr_cmp) + + sizeof(struct wlp_tx_hdr) + + WLP_DATA_HLEN + + ETH_HLEN; + net_dev->mtu = 3500; + net_dev->tx_queue_len = 20; /* FIXME: maybe use 1000? */ + +/* net_dev->flags &= ~IFF_BROADCAST; FIXME: BUG in firmware */ + /* FIXME: multicast disabled */ + net_dev->flags &= ~IFF_MULTICAST; + net_dev->features &= ~NETIF_F_SG; + net_dev->features &= ~NETIF_F_FRAGLIST; + /* All NETIF_F_*_CSUM disabled */ + net_dev->features |= NETIF_F_HIGHDMA; + net_dev->watchdog_timeo = 5*HZ; /* FIXME: a better default? */ + + net_dev->open = i1480u_open; + net_dev->stop = i1480u_stop; + net_dev->hard_start_xmit = i1480u_hard_start_xmit; + net_dev->tx_timeout = i1480u_tx_timeout; + net_dev->get_stats = i1480u_get_stats; + net_dev->set_config = i1480u_set_config; + net_dev->change_mtu = i1480u_change_mtu; + +#ifdef i1480u_FLOW_CONTROL + /* Notification endpoint setup (submitted when we open the device) */ + i1480u->notif_urb = usb_alloc_urb(0, GFP_KERNEL); + if (i1480u->notif_urb == NULL) { + dev_err(&iface->dev, "Unable to allocate notification URB\n"); + result = -ENOMEM; + goto error_urb_alloc; + } + epd = &iface->cur_altsetting->endpoint[0].desc; + usb_fill_int_urb(i1480u->notif_urb, usb_dev, + usb_rcvintpipe(usb_dev, epd->bEndpointAddress), + i1480u->notif_buffer, sizeof(i1480u->notif_buffer), + i1480u_notif_cb, i1480u, epd->bInterval); + +#endif + + i1480u->tx_inflight.max = i1480u_TX_INFLIGHT_MAX; + i1480u->tx_inflight.threshold = i1480u_TX_INFLIGHT_THRESHOLD; + i1480u->tx_inflight.restart_ts = jiffies; + usb_set_intfdata(iface, i1480u); + return result; + +#ifdef i1480u_FLOW_CONTROL +error_urb_alloc: +#endif + wlp_remove(wlp); +error_wlp_setup: + uwb_rc_put(rc); +out: + usb_put_dev(i1480u->usb_dev); + return result; +} + +static void i1480u_rm(struct i1480u *i1480u) +{ + struct uwb_rc *rc = i1480u->wlp.rc; + usb_set_intfdata(i1480u->usb_iface, NULL); +#ifdef i1480u_FLOW_CONTROL + usb_kill_urb(i1480u->notif_urb); + usb_free_urb(i1480u->notif_urb); +#endif + wlp_remove(&i1480u->wlp); + uwb_rc_put(rc); + usb_put_dev(i1480u->usb_dev); +} + +/** Just setup @net_dev's i1480u private data */ +static void i1480u_netdev_setup(struct net_device *net_dev) +{ + struct i1480u *i1480u = netdev_priv(net_dev); + /* Initialize @i1480u */ + memset(i1480u, 0, sizeof(*i1480u)); + i1480u_init(i1480u); +} + +/** + * Probe a i1480u interface and register it + * + * @iface: USB interface to link to + * @id: USB class/subclass/protocol id + * @returns: 0 if ok, < 0 errno code on error. + * + * Does basic housekeeping stuff and then allocs a netdev with space + * for the i1480u data. Initializes, registers in i1480u, registers in + * netdev, ready to go. + */ +static int i1480u_probe(struct usb_interface *iface, + const struct usb_device_id *id) +{ + int result; + struct net_device *net_dev; + struct device *dev = &iface->dev; + struct i1480u *i1480u; + + /* Allocate instance [calls i1480u_netdev_setup() on it] */ + result = -ENOMEM; + net_dev = alloc_netdev(sizeof(*i1480u), "wlp%d", i1480u_netdev_setup); + if (net_dev == NULL) { + dev_err(dev, "no memory for network device instance\n"); + goto error_alloc_netdev; + } + SET_NETDEV_DEV(net_dev, dev); + i1480u = netdev_priv(net_dev); + i1480u->net_dev = net_dev; + result = i1480u_add(i1480u, iface); /* Now setup all the wlp stuff */ + if (result < 0) { + dev_err(dev, "cannot add i1480u device: %d\n", result); + goto error_i1480u_add; + } + result = register_netdev(net_dev); /* Okey dokey, bring it up */ + if (result < 0) { + dev_err(dev, "cannot register network device: %d\n", result); + goto error_register_netdev; + } + i1480u_sysfs_setup(i1480u); + if (result < 0) + goto error_sysfs_init; + return 0; + +error_sysfs_init: + unregister_netdev(net_dev); +error_register_netdev: + i1480u_rm(i1480u); +error_i1480u_add: + free_netdev(net_dev); +error_alloc_netdev: + return result; +} + + +/** + * Disconect a i1480u from the system. + * + * i1480u_stop() has been called before, so al the rx and tx contexts + * have been taken down already. Make sure the queue is stopped, + * unregister netdev and i1480u, free and kill. + */ +static void i1480u_disconnect(struct usb_interface *iface) +{ + struct i1480u *i1480u; + struct net_device *net_dev; + + i1480u = usb_get_intfdata(iface); + net_dev = i1480u->net_dev; + netif_stop_queue(net_dev); +#ifdef i1480u_FLOW_CONTROL + usb_kill_urb(i1480u->notif_urb); +#endif + i1480u_sysfs_release(i1480u); + unregister_netdev(net_dev); + i1480u_rm(i1480u); + free_netdev(net_dev); +} + +static struct usb_device_id i1480u_id_table[] = { + { + .match_flags = USB_DEVICE_ID_MATCH_DEVICE \ + | USB_DEVICE_ID_MATCH_DEV_INFO \ + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x8086, + .idProduct = 0x0c3b, + .bDeviceClass = 0xef, + .bDeviceSubClass = 0x02, + .bDeviceProtocol = 0x02, + .bInterfaceClass = 0xff, + .bInterfaceSubClass = 0xff, + .bInterfaceProtocol = 0xff, + }, + {}, +}; +MODULE_DEVICE_TABLE(usb, i1480u_id_table); + +static struct usb_driver i1480u_driver = { + .name = KBUILD_MODNAME, + .probe = i1480u_probe, + .disconnect = i1480u_disconnect, + .id_table = i1480u_id_table, +}; + +static int __init i1480u_driver_init(void) +{ + return usb_register(&i1480u_driver); +} +module_init(i1480u_driver_init); + + +static void __exit i1480u_driver_exit(void) +{ + usb_deregister(&i1480u_driver); +} +module_exit(i1480u_driver_exit); + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("i1480 Wireless UWB Link WLP networking for USB"); +MODULE_LICENSE("GPL"); diff --git a/drivers/uwb/i1480/i1480u-wlp/netdev.c b/drivers/uwb/i1480/i1480u-wlp/netdev.c new file mode 100644 index 000000000000..8802ac43d872 --- /dev/null +++ b/drivers/uwb/i1480/i1480u-wlp/netdev.c @@ -0,0 +1,368 @@ +/* + * WUSB Wire Adapter: WLP interface + * Driver for the Linux Network stack. + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + * + * Implementation of the netdevice linkage (except tx and rx related stuff). + * + * ROADMAP: + * + * ENTRY POINTS (Net device): + * + * i1480u_open(): Called when we ifconfig up the interface; + * associates to a UWB host controller, reserves + * bandwidth (MAS), sets up RX USB URB and starts + * the queue. + * + * i1480u_stop(): Called when we ifconfig down a interface; + * reverses _open(). + * + * i1480u_set_config(): + */ + +#include <linux/if_arp.h> +#include <linux/etherdevice.h> +#include <linux/uwb/debug.h> +#include "i1480u-wlp.h" + +struct i1480u_cmd_set_ip_mas { + struct uwb_rccb rccb; + struct uwb_dev_addr addr; + u8 stream; + u8 owner; + u8 type; /* enum uwb_drp_type */ + u8 baMAS[32]; +} __attribute__((packed)); + + +static +int i1480u_set_ip_mas( + struct uwb_rc *rc, + const struct uwb_dev_addr *dstaddr, + u8 stream, u8 owner, u8 type, unsigned long *mas) +{ + + int result; + struct i1480u_cmd_set_ip_mas *cmd; + struct uwb_rc_evt_confirm reply; + + result = -ENOMEM; + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + goto error_kzalloc; + cmd->rccb.bCommandType = 0xfd; + cmd->rccb.wCommand = cpu_to_le16(0x000e); + cmd->addr = *dstaddr; + cmd->stream = stream; + cmd->owner = owner; + cmd->type = type; + if (mas == NULL) + memset(cmd->baMAS, 0x00, sizeof(cmd->baMAS)); + else + memcpy(cmd->baMAS, mas, sizeof(cmd->baMAS)); + reply.rceb.bEventType = 0xfd; + reply.rceb.wEvent = cpu_to_le16(0x000e); + result = uwb_rc_cmd(rc, "SET-IP-MAS", &cmd->rccb, sizeof(*cmd), + &reply.rceb, sizeof(reply)); + if (result < 0) + goto error_cmd; + if (reply.bResultCode != UWB_RC_RES_FAIL) { + dev_err(&rc->uwb_dev.dev, + "SET-IP-MAS: command execution failed: %d\n", + reply.bResultCode); + result = -EIO; + } +error_cmd: + kfree(cmd); +error_kzalloc: + return result; +} + +/* + * Inform a WLP interface of a MAS reservation + * + * @rc is assumed refcnted. + */ +/* FIXME: detect if remote device is WLP capable? */ +static int i1480u_mas_set_dev(struct uwb_dev *uwb_dev, struct uwb_rc *rc, + u8 stream, u8 owner, u8 type, unsigned long *mas) +{ + int result = 0; + struct device *dev = &rc->uwb_dev.dev; + + result = i1480u_set_ip_mas(rc, &uwb_dev->dev_addr, stream, owner, + type, mas); + if (result < 0) { + char rcaddrbuf[UWB_ADDR_STRSIZE], devaddrbuf[UWB_ADDR_STRSIZE]; + uwb_dev_addr_print(rcaddrbuf, sizeof(rcaddrbuf), + &rc->uwb_dev.dev_addr); + uwb_dev_addr_print(devaddrbuf, sizeof(devaddrbuf), + &uwb_dev->dev_addr); + dev_err(dev, "Set IP MAS (%s to %s) failed: %d\n", + rcaddrbuf, devaddrbuf, result); + } + return result; +} + +/** + * Called by bandwidth allocator when change occurs in reservation. + * + * @rsv: The reservation that is being established, modified, or + * terminated. + * + * When a reservation is established, modified, or terminated the upper layer + * (WLP here) needs set/update the currently available Media Access Slots + * that can be use for IP traffic. + * + * Our action taken during failure depends on how the reservation is being + * changed: + * - if reservation is being established we do nothing if we cannot set the + * new MAS to be used + * - if reservation is being terminated we revert back to PCA whether the + * SET IP MAS command succeeds or not. + */ +void i1480u_bw_alloc_cb(struct uwb_rsv *rsv) +{ + int result = 0; + struct i1480u *i1480u = rsv->pal_priv; + struct device *dev = &i1480u->usb_iface->dev; + struct uwb_dev *target_dev = rsv->target.dev; + struct uwb_rc *rc = i1480u->wlp.rc; + u8 stream = rsv->stream; + int type = rsv->type; + int is_owner = rsv->owner == &rc->uwb_dev; + unsigned long *bmp = rsv->mas.bm; + + dev_err(dev, "WLP callback called - sending set ip mas\n"); + /*user cannot change options while setting configuration*/ + mutex_lock(&i1480u->options.mutex); + switch (rsv->state) { + case UWB_RSV_STATE_T_ACCEPTED: + case UWB_RSV_STATE_O_ESTABLISHED: + result = i1480u_mas_set_dev(target_dev, rc, stream, is_owner, + type, bmp); + if (result < 0) { + dev_err(dev, "MAS reservation failed: %d\n", result); + goto out; + } + if (is_owner) { + wlp_tx_hdr_set_delivery_id_type(&i1480u->options.def_tx_hdr, + WLP_DRP | stream); + wlp_tx_hdr_set_rts_cts(&i1480u->options.def_tx_hdr, 0); + } + break; + case UWB_RSV_STATE_NONE: + /* revert back to PCA */ + result = i1480u_mas_set_dev(target_dev, rc, stream, is_owner, + type, bmp); + if (result < 0) + dev_err(dev, "MAS reservation failed: %d\n", result); + /* Revert to PCA even though SET IP MAS failed. */ + wlp_tx_hdr_set_delivery_id_type(&i1480u->options.def_tx_hdr, + i1480u->options.pca_base_priority); + wlp_tx_hdr_set_rts_cts(&i1480u->options.def_tx_hdr, 1); + break; + default: + dev_err(dev, "unexpected WLP reservation state: %s (%d).\n", + uwb_rsv_state_str(rsv->state), rsv->state); + break; + } +out: + mutex_unlock(&i1480u->options.mutex); + return; +} + +/** + * + * Called on 'ifconfig up' + */ +int i1480u_open(struct net_device *net_dev) +{ + int result; + struct i1480u *i1480u = netdev_priv(net_dev); + struct wlp *wlp = &i1480u->wlp; + struct uwb_rc *rc; + struct device *dev = &i1480u->usb_iface->dev; + + rc = wlp->rc; + result = i1480u_rx_setup(i1480u); /* Alloc RX stuff */ + if (result < 0) + goto error_rx_setup; + netif_wake_queue(net_dev); +#ifdef i1480u_FLOW_CONTROL + result = usb_submit_urb(i1480u->notif_urb, GFP_KERNEL);; + if (result < 0) { + dev_err(dev, "Can't submit notification URB: %d\n", result); + goto error_notif_urb_submit; + } +#endif + i1480u->uwb_notifs_handler.cb = i1480u_uwb_notifs_cb; + i1480u->uwb_notifs_handler.data = i1480u; + if (uwb_bg_joined(rc)) + netif_carrier_on(net_dev); + else + netif_carrier_off(net_dev); + uwb_notifs_register(rc, &i1480u->uwb_notifs_handler); + /* Interface is up with an address, now we can create WSS */ + result = wlp_wss_setup(net_dev, &wlp->wss); + if (result < 0) { + dev_err(dev, "Can't create WSS: %d. \n", result); + goto error_notif_deregister; + } + return 0; +error_notif_deregister: + uwb_notifs_deregister(rc, &i1480u->uwb_notifs_handler); +#ifdef i1480u_FLOW_CONTROL +error_notif_urb_submit: +#endif + netif_stop_queue(net_dev); + i1480u_rx_release(i1480u); +error_rx_setup: + return result; +} + + +/** + * Called on 'ifconfig down' + */ +int i1480u_stop(struct net_device *net_dev) +{ + struct i1480u *i1480u = netdev_priv(net_dev); + struct wlp *wlp = &i1480u->wlp; + struct uwb_rc *rc = wlp->rc; + + BUG_ON(wlp->rc == NULL); + wlp_wss_remove(&wlp->wss); + uwb_notifs_deregister(rc, &i1480u->uwb_notifs_handler); + netif_carrier_off(net_dev); +#ifdef i1480u_FLOW_CONTROL + usb_kill_urb(i1480u->notif_urb); +#endif + netif_stop_queue(net_dev); + i1480u_rx_release(i1480u); + i1480u_tx_release(i1480u); + return 0; +} + + +/** Report statistics */ +struct net_device_stats *i1480u_get_stats(struct net_device *net_dev) +{ + struct i1480u *i1480u = netdev_priv(net_dev); + return &i1480u->stats; +} + + +/** + * + * Change the interface config--we probably don't have to do anything. + */ +int i1480u_set_config(struct net_device *net_dev, struct ifmap *map) +{ + int result; + struct i1480u *i1480u = netdev_priv(net_dev); + BUG_ON(i1480u->wlp.rc == NULL); + result = 0; + return result; +} + +/** + * Change the MTU of the interface + */ +int i1480u_change_mtu(struct net_device *net_dev, int mtu) +{ + static union { + struct wlp_tx_hdr tx; + struct wlp_rx_hdr rx; + } i1480u_all_hdrs; + + if (mtu < ETH_HLEN) /* We encap eth frames */ + return -ERANGE; + if (mtu > 4000 - sizeof(i1480u_all_hdrs)) + return -ERANGE; + net_dev->mtu = mtu; + return 0; +} + + +/** + * Callback function to handle events from UWB + * When we see other devices we know the carrier is ok, + * if we are the only device in the beacon group we set the carrier + * state to off. + * */ +void i1480u_uwb_notifs_cb(void *data, struct uwb_dev *uwb_dev, + enum uwb_notifs event) +{ + struct i1480u *i1480u = data; + struct net_device *net_dev = i1480u->net_dev; + struct device *dev = &i1480u->usb_iface->dev; + switch (event) { + case UWB_NOTIF_BG_JOIN: + netif_carrier_on(net_dev); + dev_info(dev, "Link is up\n"); + break; + case UWB_NOTIF_BG_LEAVE: + netif_carrier_off(net_dev); + dev_info(dev, "Link is down\n"); + break; + default: + dev_err(dev, "don't know how to handle event %d from uwb\n", + event); + } +} + +/** + * Stop the network queue + * + * Enable WLP substack to stop network queue. We also set the flow control + * threshold at this time to prevent the flow control from restarting the + * queue. + * + * we are loosing the current threshold value here ... FIXME? + */ +void i1480u_stop_queue(struct wlp *wlp) +{ + struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp); + struct net_device *net_dev = i1480u->net_dev; + i1480u->tx_inflight.threshold = 0; + netif_stop_queue(net_dev); +} + +/** + * Start the network queue + * + * Enable WLP substack to start network queue. Also re-enable the flow + * control to manage the queue again. + * + * We re-enable the flow control by storing the default threshold in the + * flow control threshold. This means that if the user modified the + * threshold before the queue was stopped and restarted that information + * will be lost. FIXME? + */ +void i1480u_start_queue(struct wlp *wlp) +{ + struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp); + struct net_device *net_dev = i1480u->net_dev; + i1480u->tx_inflight.threshold = i1480u_TX_INFLIGHT_THRESHOLD; + netif_start_queue(net_dev); +} diff --git a/drivers/uwb/i1480/i1480u-wlp/rx.c b/drivers/uwb/i1480/i1480u-wlp/rx.c new file mode 100644 index 000000000000..9fc035354a76 --- /dev/null +++ b/drivers/uwb/i1480/i1480u-wlp/rx.c @@ -0,0 +1,486 @@ +/* + * WUSB Wire Adapter: WLP interface + * Driver for the Linux Network stack. + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * i1480u's RX handling is simple. i1480u will send the received + * network packets broken up in fragments; 1 to N fragments make a + * packet, we assemble them together and deliver the packet with netif_rx(). + * + * Beacuse each USB transfer is a *single* fragment (except when the + * transfer contains a first fragment), each URB called thus + * back contains one or two fragments. So we queue N URBs, each with its own + * fragment buffer. When a URB is done, we process it (adding to the + * current skb from the fragment buffer until complete). Once + * processed, we requeue the URB. There is always a bunch of URBs + * ready to take data, so the intergap should be minimal. + * + * An URB's transfer buffer is the data field of a socket buffer. This + * reduces copying as data can be passed directly to network layer. If a + * complete packet or 1st fragment is received the URB's transfer buffer is + * taken away from it and used to send data to the network layer. In this + * case a new transfer buffer is allocated to the URB before being requeued. + * If a "NEXT" or "LAST" fragment is received, the fragment contents is + * appended to the RX packet under construction and the transfer buffer + * is reused. To be able to use this buffer to assemble complete packets + * we set each buffer's size to that of the MAX ethernet packet that can + * be received. There is thus room for improvement in memory usage. + * + * When the max tx fragment size increases, we should be able to read + * data into the skbs directly with very simple code. + * + * ROADMAP: + * + * ENTRY POINTS: + * + * i1480u_rx_setup(): setup RX context [from i1480u_open()] + * + * i1480u_rx_release(): release RX context [from i1480u_stop()] + * + * i1480u_rx_cb(): called when the RX USB URB receives a + * packet. It removes the header and pushes it up + * the Linux netdev stack with netif_rx(). + * + * i1480u_rx_buffer() + * i1480u_drop() and i1480u_fix() + * i1480u_skb_deliver + * + */ + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include "i1480u-wlp.h" + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + + +/** + * Setup the RX context + * + * Each URB is provided with a transfer_buffer that is the data field + * of a new socket buffer. + */ +int i1480u_rx_setup(struct i1480u *i1480u) +{ + int result, cnt; + struct device *dev = &i1480u->usb_iface->dev; + struct net_device *net_dev = i1480u->net_dev; + struct usb_endpoint_descriptor *epd; + struct sk_buff *skb; + + /* Alloc RX stuff */ + i1480u->rx_skb = NULL; /* not in process of receiving packet */ + result = -ENOMEM; + epd = &i1480u->usb_iface->cur_altsetting->endpoint[1].desc; + for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) { + struct i1480u_rx_buf *rx_buf = &i1480u->rx_buf[cnt]; + rx_buf->i1480u = i1480u; + skb = dev_alloc_skb(i1480u_MAX_RX_PKT_SIZE); + if (!skb) { + dev_err(dev, + "RX: cannot allocate RX buffer %d\n", cnt); + result = -ENOMEM; + goto error; + } + skb->dev = net_dev; + skb->ip_summed = CHECKSUM_NONE; + skb_reserve(skb, 2); + rx_buf->data = skb; + rx_buf->urb = usb_alloc_urb(0, GFP_KERNEL); + if (unlikely(rx_buf->urb == NULL)) { + dev_err(dev, "RX: cannot allocate URB %d\n", cnt); + result = -ENOMEM; + goto error; + } + usb_fill_bulk_urb(rx_buf->urb, i1480u->usb_dev, + usb_rcvbulkpipe(i1480u->usb_dev, epd->bEndpointAddress), + rx_buf->data->data, i1480u_MAX_RX_PKT_SIZE - 2, + i1480u_rx_cb, rx_buf); + result = usb_submit_urb(rx_buf->urb, GFP_NOIO); + if (unlikely(result < 0)) { + dev_err(dev, "RX: cannot submit URB %d: %d\n", + cnt, result); + goto error; + } + } + return 0; + +error: + i1480u_rx_release(i1480u); + return result; +} + + +/** Release resources associated to the rx context */ +void i1480u_rx_release(struct i1480u *i1480u) +{ + int cnt; + for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) { + if (i1480u->rx_buf[cnt].data) + dev_kfree_skb(i1480u->rx_buf[cnt].data); + if (i1480u->rx_buf[cnt].urb) { + usb_kill_urb(i1480u->rx_buf[cnt].urb); + usb_free_urb(i1480u->rx_buf[cnt].urb); + } + } + if (i1480u->rx_skb != NULL) + dev_kfree_skb(i1480u->rx_skb); +} + +static +void i1480u_rx_unlink_urbs(struct i1480u *i1480u) +{ + int cnt; + for (cnt = 0; cnt < i1480u_RX_BUFS; cnt++) { + if (i1480u->rx_buf[cnt].urb) + usb_unlink_urb(i1480u->rx_buf[cnt].urb); + } +} + +/** Fix an out-of-sequence packet */ +#define i1480u_fix(i1480u, msg...) \ +do { \ + if (printk_ratelimit()) \ + dev_err(&i1480u->usb_iface->dev, msg); \ + dev_kfree_skb_irq(i1480u->rx_skb); \ + i1480u->rx_skb = NULL; \ + i1480u->rx_untd_pkt_size = 0; \ +} while (0) + + +/** Drop an out-of-sequence packet */ +#define i1480u_drop(i1480u, msg...) \ +do { \ + if (printk_ratelimit()) \ + dev_err(&i1480u->usb_iface->dev, msg); \ + i1480u->stats.rx_dropped++; \ +} while (0) + + + + +/** Finalizes setting up the SKB and delivers it + * + * We first pass the incoming frame to WLP substack for verification. It + * may also be a WLP association frame in which case WLP will take over the + * processing. If WLP does not take it over it will still verify it, if the + * frame is invalid the skb will be freed by WLP and we will not continue + * parsing. + * */ +static +void i1480u_skb_deliver(struct i1480u *i1480u) +{ + int should_parse; + struct net_device *net_dev = i1480u->net_dev; + struct device *dev = &i1480u->usb_iface->dev; + + d_printf(6, dev, "RX delivered pre skb(%p), %u bytes\n", + i1480u->rx_skb, i1480u->rx_skb->len); + d_dump(7, dev, i1480u->rx_skb->data, i1480u->rx_skb->len); + should_parse = wlp_receive_frame(dev, &i1480u->wlp, i1480u->rx_skb, + &i1480u->rx_srcaddr); + if (!should_parse) + goto out; + i1480u->rx_skb->protocol = eth_type_trans(i1480u->rx_skb, net_dev); + d_printf(5, dev, "RX delivered skb(%p), %u bytes\n", + i1480u->rx_skb, i1480u->rx_skb->len); + d_dump(7, dev, i1480u->rx_skb->data, + i1480u->rx_skb->len > 72 ? 72 : i1480u->rx_skb->len); + i1480u->stats.rx_packets++; + i1480u->stats.rx_bytes += i1480u->rx_untd_pkt_size; + net_dev->last_rx = jiffies; + /* FIXME: flow control: check netif_rx() retval */ + + netif_rx(i1480u->rx_skb); /* deliver */ +out: + i1480u->rx_skb = NULL; + i1480u->rx_untd_pkt_size = 0; +} + + +/** + * Process a buffer of data received from the USB RX endpoint + * + * First fragment arrives with next or last fragment. All other fragments + * arrive alone. + * + * /me hates long functions. + */ +static +void i1480u_rx_buffer(struct i1480u_rx_buf *rx_buf) +{ + unsigned pkt_completed = 0; /* !0 when we got all pkt fragments */ + size_t untd_hdr_size, untd_frg_size; + size_t i1480u_hdr_size; + struct wlp_rx_hdr *i1480u_hdr = NULL; + + struct i1480u *i1480u = rx_buf->i1480u; + struct sk_buff *skb = rx_buf->data; + int size_left = rx_buf->urb->actual_length; + void *ptr = rx_buf->urb->transfer_buffer; /* also rx_buf->data->data */ + struct untd_hdr *untd_hdr; + + struct net_device *net_dev = i1480u->net_dev; + struct device *dev = &i1480u->usb_iface->dev; + struct sk_buff *new_skb; + +#if 0 + dev_fnstart(dev, + "(i1480u %p ptr %p size_left %zu)\n", i1480u, ptr, size_left); + dev_err(dev, "RX packet, %zu bytes\n", size_left); + dump_bytes(dev, ptr, size_left); +#endif + i1480u_hdr_size = sizeof(struct wlp_rx_hdr); + + while (size_left > 0) { + if (pkt_completed) { + i1480u_drop(i1480u, "RX: fragment follows completed" + "packet in same buffer. Dropping\n"); + break; + } + untd_hdr = ptr; + if (size_left < sizeof(*untd_hdr)) { /* Check the UNTD header */ + i1480u_drop(i1480u, "RX: short UNTD header! Dropping\n"); + goto out; + } + if (unlikely(untd_hdr_rx_tx(untd_hdr) == 0)) { /* Paranoia: TX set? */ + i1480u_drop(i1480u, "RX: TX bit set! Dropping\n"); + goto out; + } + switch (untd_hdr_type(untd_hdr)) { /* Check the UNTD header type */ + case i1480u_PKT_FRAG_1ST: { + struct untd_hdr_1st *untd_hdr_1st = (void *) untd_hdr; + dev_dbg(dev, "1st fragment\n"); + untd_hdr_size = sizeof(struct untd_hdr_1st); + if (i1480u->rx_skb != NULL) + i1480u_fix(i1480u, "RX: 1st fragment out of " + "sequence! Fixing\n"); + if (size_left < untd_hdr_size + i1480u_hdr_size) { + i1480u_drop(i1480u, "RX: short 1st fragment! " + "Dropping\n"); + goto out; + } + i1480u->rx_untd_pkt_size = le16_to_cpu(untd_hdr->len) + - i1480u_hdr_size; + untd_frg_size = le16_to_cpu(untd_hdr_1st->fragment_len); + if (size_left < untd_hdr_size + untd_frg_size) { + i1480u_drop(i1480u, + "RX: short payload! Dropping\n"); + goto out; + } + i1480u->rx_skb = skb; + i1480u_hdr = (void *) untd_hdr_1st + untd_hdr_size; + i1480u->rx_srcaddr = i1480u_hdr->srcaddr; + skb_put(i1480u->rx_skb, untd_hdr_size + untd_frg_size); + skb_pull(i1480u->rx_skb, untd_hdr_size + i1480u_hdr_size); + stats_add_sample(&i1480u->lqe_stats, (s8) i1480u_hdr->LQI - 7); + stats_add_sample(&i1480u->rssi_stats, i1480u_hdr->RSSI + 18); + rx_buf->data = NULL; /* need to create new buffer */ + break; + } + case i1480u_PKT_FRAG_NXT: { + dev_dbg(dev, "nxt fragment\n"); + untd_hdr_size = sizeof(struct untd_hdr_rst); + if (i1480u->rx_skb == NULL) { + i1480u_drop(i1480u, "RX: next fragment out of " + "sequence! Dropping\n"); + goto out; + } + if (size_left < untd_hdr_size) { + i1480u_drop(i1480u, "RX: short NXT fragment! " + "Dropping\n"); + goto out; + } + untd_frg_size = le16_to_cpu(untd_hdr->len); + if (size_left < untd_hdr_size + untd_frg_size) { + i1480u_drop(i1480u, + "RX: short payload! Dropping\n"); + goto out; + } + memmove(skb_put(i1480u->rx_skb, untd_frg_size), + ptr + untd_hdr_size, untd_frg_size); + break; + } + case i1480u_PKT_FRAG_LST: { + dev_dbg(dev, "Lst fragment\n"); + untd_hdr_size = sizeof(struct untd_hdr_rst); + if (i1480u->rx_skb == NULL) { + i1480u_drop(i1480u, "RX: last fragment out of " + "sequence! Dropping\n"); + goto out; + } + if (size_left < untd_hdr_size) { + i1480u_drop(i1480u, "RX: short LST fragment! " + "Dropping\n"); + goto out; + } + untd_frg_size = le16_to_cpu(untd_hdr->len); + if (size_left < untd_frg_size + untd_hdr_size) { + i1480u_drop(i1480u, + "RX: short payload! Dropping\n"); + goto out; + } + memmove(skb_put(i1480u->rx_skb, untd_frg_size), + ptr + untd_hdr_size, untd_frg_size); + pkt_completed = 1; + break; + } + case i1480u_PKT_FRAG_CMP: { + dev_dbg(dev, "cmp fragment\n"); + untd_hdr_size = sizeof(struct untd_hdr_cmp); + if (i1480u->rx_skb != NULL) + i1480u_fix(i1480u, "RX: fix out-of-sequence CMP" + " fragment!\n"); + if (size_left < untd_hdr_size + i1480u_hdr_size) { + i1480u_drop(i1480u, "RX: short CMP fragment! " + "Dropping\n"); + goto out; + } + i1480u->rx_untd_pkt_size = le16_to_cpu(untd_hdr->len); + untd_frg_size = i1480u->rx_untd_pkt_size; + if (size_left < i1480u->rx_untd_pkt_size + untd_hdr_size) { + i1480u_drop(i1480u, + "RX: short payload! Dropping\n"); + goto out; + } + i1480u->rx_skb = skb; + i1480u_hdr = (void *) untd_hdr + untd_hdr_size; + i1480u->rx_srcaddr = i1480u_hdr->srcaddr; + stats_add_sample(&i1480u->lqe_stats, (s8) i1480u_hdr->LQI - 7); + stats_add_sample(&i1480u->rssi_stats, i1480u_hdr->RSSI + 18); + skb_put(i1480u->rx_skb, untd_hdr_size + i1480u->rx_untd_pkt_size); + skb_pull(i1480u->rx_skb, untd_hdr_size + i1480u_hdr_size); + rx_buf->data = NULL; /* for hand off skb to network stack */ + pkt_completed = 1; + i1480u->rx_untd_pkt_size -= i1480u_hdr_size; /* accurate stat */ + break; + } + default: + i1480u_drop(i1480u, "RX: unknown packet type %u! " + "Dropping\n", untd_hdr_type(untd_hdr)); + goto out; + } + size_left -= untd_hdr_size + untd_frg_size; + if (size_left > 0) + ptr += untd_hdr_size + untd_frg_size; + } + if (pkt_completed) + i1480u_skb_deliver(i1480u); +out: + /* recreate needed RX buffers*/ + if (rx_buf->data == NULL) { + /* buffer is being used to receive packet, create new */ + new_skb = dev_alloc_skb(i1480u_MAX_RX_PKT_SIZE); + if (!new_skb) { + if (printk_ratelimit()) + dev_err(dev, + "RX: cannot allocate RX buffer\n"); + } else { + new_skb->dev = net_dev; + new_skb->ip_summed = CHECKSUM_NONE; + skb_reserve(new_skb, 2); + rx_buf->data = new_skb; + } + } + return; +} + + +/** + * Called when an RX URB has finished receiving or has found some kind + * of error condition. + * + * LIMITATIONS: + * + * - We read USB-transfers, each transfer contains a SINGLE fragment + * (can contain a complete packet, or a 1st, next, or last fragment + * of a packet). + * Looks like a transfer can contain more than one fragment (07/18/06) + * + * - Each transfer buffer is the size of the maximum packet size (minus + * headroom), i1480u_MAX_PKT_SIZE - 2 + * + * - We always read the full USB-transfer, no partials. + * + * - Each transfer is read directly into a skb. This skb will be used to + * send data to the upper layers if it is the first fragment or a complete + * packet. In the other cases the data will be copied from the skb to + * another skb that is being prepared for the upper layers from a prev + * first fragment. + * + * It is simply too much of a pain. Gosh, there should be a unified + * SG infrastructure for *everything* [so that I could declare a SG + * buffer, pass it to USB for receiving, append some space to it if + * I wish, receive more until I have the whole chunk, adapt + * pointers on each fragment to remove hardware headers and then + * attach that to an skbuff and netif_rx()]. + */ +void i1480u_rx_cb(struct urb *urb) +{ + int result; + int do_parse_buffer = 1; + struct i1480u_rx_buf *rx_buf = urb->context; + struct i1480u *i1480u = rx_buf->i1480u; + struct device *dev = &i1480u->usb_iface->dev; + unsigned long flags; + u8 rx_buf_idx = rx_buf - i1480u->rx_buf; + + switch (urb->status) { + case 0: + break; + case -ECONNRESET: /* Not an error, but a controlled situation; */ + case -ENOENT: /* (we killed the URB)...so, no broadcast */ + case -ESHUTDOWN: /* going away! */ + dev_err(dev, "RX URB[%u]: goind down %d\n", + rx_buf_idx, urb->status); + goto error; + default: + dev_err(dev, "RX URB[%u]: unknown status %d\n", + rx_buf_idx, urb->status); + if (edc_inc(&i1480u->rx_errors, EDC_MAX_ERRORS, + EDC_ERROR_TIMEFRAME)) { + dev_err(dev, "RX: max acceptable errors exceeded," + " resetting device.\n"); + i1480u_rx_unlink_urbs(i1480u); + wlp_reset_all(&i1480u->wlp); + goto error; + } + do_parse_buffer = 0; + break; + } + spin_lock_irqsave(&i1480u->lock, flags); + /* chew the data fragments, extract network packets */ + if (do_parse_buffer) { + i1480u_rx_buffer(rx_buf); + if (rx_buf->data) { + rx_buf->urb->transfer_buffer = rx_buf->data->data; + result = usb_submit_urb(rx_buf->urb, GFP_ATOMIC); + if (result < 0) { + dev_err(dev, "RX URB[%u]: cannot submit %d\n", + rx_buf_idx, result); + } + } + } + spin_unlock_irqrestore(&i1480u->lock, flags); +error: + return; +} + diff --git a/drivers/uwb/i1480/i1480u-wlp/sysfs.c b/drivers/uwb/i1480/i1480u-wlp/sysfs.c new file mode 100644 index 000000000000..a1d8ca6ac935 --- /dev/null +++ b/drivers/uwb/i1480/i1480u-wlp/sysfs.c @@ -0,0 +1,408 @@ +/* + * WUSB Wire Adapter: WLP interface + * Sysfs interfaces + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/uwb/debug.h> +#include <linux/device.h> +#include "i1480u-wlp.h" + + +/** + * + * @dev: Class device from the net_device; assumed refcnted. + * + * Yes, I don't lock--we assume it is refcounted and I am getting a + * single byte value that is kind of atomic to read. + */ +ssize_t uwb_phy_rate_show(const struct wlp_options *options, char *buf) +{ + return sprintf(buf, "%u\n", + wlp_tx_hdr_phy_rate(&options->def_tx_hdr)); +} +EXPORT_SYMBOL_GPL(uwb_phy_rate_show); + + +ssize_t uwb_phy_rate_store(struct wlp_options *options, + const char *buf, size_t size) +{ + ssize_t result; + unsigned rate; + + result = sscanf(buf, "%u\n", &rate); + if (result != 1) { + result = -EINVAL; + goto out; + } + result = -EINVAL; + if (rate >= UWB_PHY_RATE_INVALID) + goto out; + wlp_tx_hdr_set_phy_rate(&options->def_tx_hdr, rate); + result = 0; +out: + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(uwb_phy_rate_store); + + +ssize_t uwb_rts_cts_show(const struct wlp_options *options, char *buf) +{ + return sprintf(buf, "%u\n", + wlp_tx_hdr_rts_cts(&options->def_tx_hdr)); +} +EXPORT_SYMBOL_GPL(uwb_rts_cts_show); + + +ssize_t uwb_rts_cts_store(struct wlp_options *options, + const char *buf, size_t size) +{ + ssize_t result; + unsigned value; + + result = sscanf(buf, "%u\n", &value); + if (result != 1) { + result = -EINVAL; + goto out; + } + result = -EINVAL; + wlp_tx_hdr_set_rts_cts(&options->def_tx_hdr, !!value); + result = 0; +out: + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(uwb_rts_cts_store); + + +ssize_t uwb_ack_policy_show(const struct wlp_options *options, char *buf) +{ + return sprintf(buf, "%u\n", + wlp_tx_hdr_ack_policy(&options->def_tx_hdr)); +} +EXPORT_SYMBOL_GPL(uwb_ack_policy_show); + + +ssize_t uwb_ack_policy_store(struct wlp_options *options, + const char *buf, size_t size) +{ + ssize_t result; + unsigned value; + + result = sscanf(buf, "%u\n", &value); + if (result != 1 || value > UWB_ACK_B_REQ) { + result = -EINVAL; + goto out; + } + wlp_tx_hdr_set_ack_policy(&options->def_tx_hdr, value); + result = 0; +out: + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(uwb_ack_policy_store); + + +/** + * Show the PCA base priority. + * + * We can access without locking, as the value is (for now) orthogonal + * to other values. + */ +ssize_t uwb_pca_base_priority_show(const struct wlp_options *options, + char *buf) +{ + return sprintf(buf, "%u\n", + options->pca_base_priority); +} +EXPORT_SYMBOL_GPL(uwb_pca_base_priority_show); + + +/** + * Set the PCA base priority. + * + * We can access without locking, as the value is (for now) orthogonal + * to other values. + */ +ssize_t uwb_pca_base_priority_store(struct wlp_options *options, + const char *buf, size_t size) +{ + ssize_t result = -EINVAL; + u8 pca_base_priority; + + result = sscanf(buf, "%hhu\n", &pca_base_priority); + if (result != 1) { + result = -EINVAL; + goto out; + } + result = -EINVAL; + if (pca_base_priority >= 8) + goto out; + options->pca_base_priority = pca_base_priority; + /* Update TX header if we are currently using PCA. */ + if (result >= 0 && (wlp_tx_hdr_delivery_id_type(&options->def_tx_hdr) & WLP_DRP) == 0) + wlp_tx_hdr_set_delivery_id_type(&options->def_tx_hdr, options->pca_base_priority); + result = 0; +out: + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(uwb_pca_base_priority_store); + +/** + * Show current inflight values + * + * Will print the current MAX and THRESHOLD values for the basic flow + * control. In addition it will report how many times the TX queue needed + * to be restarted since the last time this query was made. + */ +static ssize_t wlp_tx_inflight_show(struct i1480u_tx_inflight *inflight, + char *buf) +{ + ssize_t result; + unsigned long sec_elapsed = (jiffies - inflight->restart_ts)/HZ; + unsigned long restart_count = atomic_read(&inflight->restart_count); + + result = scnprintf(buf, PAGE_SIZE, "%lu %lu %d %lu %lu %lu\n" + "#read: threshold max inflight_count restarts " + "seconds restarts/sec\n" + "#write: threshold max\n", + inflight->threshold, inflight->max, + atomic_read(&inflight->count), + restart_count, sec_elapsed, + sec_elapsed == 0 ? 0 : restart_count/sec_elapsed); + inflight->restart_ts = jiffies; + atomic_set(&inflight->restart_count, 0); + return result; +} + +static +ssize_t wlp_tx_inflight_store(struct i1480u_tx_inflight *inflight, + const char *buf, size_t size) +{ + unsigned long in_threshold, in_max; + ssize_t result; + result = sscanf(buf, "%lu %lu", &in_threshold, &in_max); + if (result != 2) + return -EINVAL; + if (in_max <= in_threshold) + return -EINVAL; + inflight->max = in_max; + inflight->threshold = in_threshold; + return size; +} +/* + * Glue (or function adaptors) for accesing info on sysfs + * + * [we need this indirection because the PCI driver does almost the + * same] + * + * Linux 2.6.21 changed how 'struct netdevice' does attributes (from + * having a 'struct class_dev' to having a 'struct device'). That is + * quite of a pain. + * + * So we try to abstract that here. i1480u_SHOW() and i1480u_STORE() + * create adaptors for extracting the 'struct i1480u' from a 'struct + * dev' and calling a function for doing a sysfs operation (as we have + * them factorized already). i1480u_ATTR creates the attribute file + * (CLASS_DEVICE_ATTR or DEVICE_ATTR) and i1480u_ATTR_NAME produces a + * class_device_attr_NAME or device_attr_NAME (for group registration). + */ +#include <linux/version.h> + +#define i1480u_SHOW(name, fn, param) \ +static ssize_t i1480u_show_##name(struct device *dev, \ + struct device_attribute *attr,\ + char *buf) \ +{ \ + struct i1480u *i1480u = netdev_priv(to_net_dev(dev)); \ + return fn(&i1480u->param, buf); \ +} + +#define i1480u_STORE(name, fn, param) \ +static ssize_t i1480u_store_##name(struct device *dev, \ + struct device_attribute *attr,\ + const char *buf, size_t size)\ +{ \ + struct i1480u *i1480u = netdev_priv(to_net_dev(dev)); \ + return fn(&i1480u->param, buf, size); \ +} + +#define i1480u_ATTR(name, perm) static DEVICE_ATTR(name, perm, \ + i1480u_show_##name,\ + i1480u_store_##name) + +#define i1480u_ATTR_SHOW(name) static DEVICE_ATTR(name, \ + S_IRUGO, \ + i1480u_show_##name, NULL) + +#define i1480u_ATTR_NAME(a) (dev_attr_##a) + + +/* + * Sysfs adaptors + */ +i1480u_SHOW(uwb_phy_rate, uwb_phy_rate_show, options); +i1480u_STORE(uwb_phy_rate, uwb_phy_rate_store, options); +i1480u_ATTR(uwb_phy_rate, S_IRUGO | S_IWUSR); + +i1480u_SHOW(uwb_rts_cts, uwb_rts_cts_show, options); +i1480u_STORE(uwb_rts_cts, uwb_rts_cts_store, options); +i1480u_ATTR(uwb_rts_cts, S_IRUGO | S_IWUSR); + +i1480u_SHOW(uwb_ack_policy, uwb_ack_policy_show, options); +i1480u_STORE(uwb_ack_policy, uwb_ack_policy_store, options); +i1480u_ATTR(uwb_ack_policy, S_IRUGO | S_IWUSR); + +i1480u_SHOW(uwb_pca_base_priority, uwb_pca_base_priority_show, options); +i1480u_STORE(uwb_pca_base_priority, uwb_pca_base_priority_store, options); +i1480u_ATTR(uwb_pca_base_priority, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_eda, wlp_eda_show, wlp); +i1480u_STORE(wlp_eda, wlp_eda_store, wlp); +i1480u_ATTR(wlp_eda, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_uuid, wlp_uuid_show, wlp); +i1480u_STORE(wlp_uuid, wlp_uuid_store, wlp); +i1480u_ATTR(wlp_uuid, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_name, wlp_dev_name_show, wlp); +i1480u_STORE(wlp_dev_name, wlp_dev_name_store, wlp); +i1480u_ATTR(wlp_dev_name, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_manufacturer, wlp_dev_manufacturer_show, wlp); +i1480u_STORE(wlp_dev_manufacturer, wlp_dev_manufacturer_store, wlp); +i1480u_ATTR(wlp_dev_manufacturer, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_model_name, wlp_dev_model_name_show, wlp); +i1480u_STORE(wlp_dev_model_name, wlp_dev_model_name_store, wlp); +i1480u_ATTR(wlp_dev_model_name, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_model_nr, wlp_dev_model_nr_show, wlp); +i1480u_STORE(wlp_dev_model_nr, wlp_dev_model_nr_store, wlp); +i1480u_ATTR(wlp_dev_model_nr, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_serial, wlp_dev_serial_show, wlp); +i1480u_STORE(wlp_dev_serial, wlp_dev_serial_store, wlp); +i1480u_ATTR(wlp_dev_serial, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_prim_category, wlp_dev_prim_category_show, wlp); +i1480u_STORE(wlp_dev_prim_category, wlp_dev_prim_category_store, wlp); +i1480u_ATTR(wlp_dev_prim_category, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_prim_OUI, wlp_dev_prim_OUI_show, wlp); +i1480u_STORE(wlp_dev_prim_OUI, wlp_dev_prim_OUI_store, wlp); +i1480u_ATTR(wlp_dev_prim_OUI, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_prim_OUI_sub, wlp_dev_prim_OUI_sub_show, wlp); +i1480u_STORE(wlp_dev_prim_OUI_sub, wlp_dev_prim_OUI_sub_store, wlp); +i1480u_ATTR(wlp_dev_prim_OUI_sub, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_dev_prim_subcat, wlp_dev_prim_subcat_show, wlp); +i1480u_STORE(wlp_dev_prim_subcat, wlp_dev_prim_subcat_store, wlp); +i1480u_ATTR(wlp_dev_prim_subcat, S_IRUGO | S_IWUSR); + +i1480u_SHOW(wlp_neighborhood, wlp_neighborhood_show, wlp); +i1480u_ATTR_SHOW(wlp_neighborhood); + +i1480u_SHOW(wss_activate, wlp_wss_activate_show, wlp.wss); +i1480u_STORE(wss_activate, wlp_wss_activate_store, wlp.wss); +i1480u_ATTR(wss_activate, S_IRUGO | S_IWUSR); + +/* + * Show the (min, max, avg) Line Quality Estimate (LQE, in dB) as over + * the last 256 received WLP frames (ECMA-368 13.3). + * + * [the -7dB that have to be substracted from the LQI to make the LQE + * are already taken into account]. + */ +i1480u_SHOW(wlp_lqe, stats_show, lqe_stats); +i1480u_STORE(wlp_lqe, stats_store, lqe_stats); +i1480u_ATTR(wlp_lqe, S_IRUGO | S_IWUSR); + +/* + * Show the Receive Signal Strength Indicator averaged over all the + * received WLP frames (ECMA-368 13.3). Still is not clear what + * this value is, but is kind of a percentage of the signal strength + * at the antenna. + */ +i1480u_SHOW(wlp_rssi, stats_show, rssi_stats); +i1480u_STORE(wlp_rssi, stats_store, rssi_stats); +i1480u_ATTR(wlp_rssi, S_IRUGO | S_IWUSR); + +/** + * We maintain a basic flow control counter. "count" how many TX URBs are + * outstanding. Only allow "max" + * TX URBs to be outstanding. If this value is reached the queue will be + * stopped. The queue will be restarted when there are + * "threshold" URBs outstanding. + */ +i1480u_SHOW(wlp_tx_inflight, wlp_tx_inflight_show, tx_inflight); +i1480u_STORE(wlp_tx_inflight, wlp_tx_inflight_store, tx_inflight); +i1480u_ATTR(wlp_tx_inflight, S_IRUGO | S_IWUSR); + +static struct attribute *i1480u_attrs[] = { + &i1480u_ATTR_NAME(uwb_phy_rate).attr, + &i1480u_ATTR_NAME(uwb_rts_cts).attr, + &i1480u_ATTR_NAME(uwb_ack_policy).attr, + &i1480u_ATTR_NAME(uwb_pca_base_priority).attr, + &i1480u_ATTR_NAME(wlp_lqe).attr, + &i1480u_ATTR_NAME(wlp_rssi).attr, + &i1480u_ATTR_NAME(wlp_eda).attr, + &i1480u_ATTR_NAME(wlp_uuid).attr, + &i1480u_ATTR_NAME(wlp_dev_name).attr, + &i1480u_ATTR_NAME(wlp_dev_manufacturer).attr, + &i1480u_ATTR_NAME(wlp_dev_model_name).attr, + &i1480u_ATTR_NAME(wlp_dev_model_nr).attr, + &i1480u_ATTR_NAME(wlp_dev_serial).attr, + &i1480u_ATTR_NAME(wlp_dev_prim_category).attr, + &i1480u_ATTR_NAME(wlp_dev_prim_OUI).attr, + &i1480u_ATTR_NAME(wlp_dev_prim_OUI_sub).attr, + &i1480u_ATTR_NAME(wlp_dev_prim_subcat).attr, + &i1480u_ATTR_NAME(wlp_neighborhood).attr, + &i1480u_ATTR_NAME(wss_activate).attr, + &i1480u_ATTR_NAME(wlp_tx_inflight).attr, + NULL, +}; + +static struct attribute_group i1480u_attr_group = { + .name = NULL, /* we want them in the same directory */ + .attrs = i1480u_attrs, +}; + +int i1480u_sysfs_setup(struct i1480u *i1480u) +{ + int result; + struct device *dev = &i1480u->usb_iface->dev; + result = sysfs_create_group(&i1480u->net_dev->dev.kobj, + &i1480u_attr_group); + if (result < 0) + dev_err(dev, "cannot initialize sysfs attributes: %d\n", + result); + return result; +} + + +void i1480u_sysfs_release(struct i1480u *i1480u) +{ + sysfs_remove_group(&i1480u->net_dev->dev.kobj, + &i1480u_attr_group); +} diff --git a/drivers/uwb/i1480/i1480u-wlp/tx.c b/drivers/uwb/i1480/i1480u-wlp/tx.c new file mode 100644 index 000000000000..3426bfb68240 --- /dev/null +++ b/drivers/uwb/i1480/i1480u-wlp/tx.c @@ -0,0 +1,632 @@ +/* + * WUSB Wire Adapter: WLP interface + * Deal with TX (massaging data to transmit, handling it) + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Transmission engine. Get an skb, create from that a WLP transmit + * context, add a WLP TX header (which we keep prefilled in the + * device's instance), fill out the target-specific fields and + * fire it. + * + * ROADMAP: + * + * Entry points: + * + * i1480u_tx_release(): called by i1480u_disconnect() to release + * pending tx contexts. + * + * i1480u_tx_cb(): callback for TX contexts (USB URBs) + * i1480u_tx_destroy(): + * + * i1480u_tx_timeout(): called for timeout handling from the + * network stack. + * + * i1480u_hard_start_xmit(): called for transmitting an skb from + * the network stack. Will interact with WLP + * substack to verify and prepare frame. + * i1480u_xmit_frame(): actual transmission on hardware + * + * i1480u_tx_create() Creates TX context + * i1480u_tx_create_1() For packets in 1 fragment + * i1480u_tx_create_n() For packets in >1 fragments + * + * TODO: + * + * - FIXME: rewrite using usb_sg_*(), add asynch support to + * usb_sg_*(). It might not make too much sense as most of + * the times the MTU will be smaller than one page... + */ + +#include "i1480u-wlp.h" +#define D_LOCAL 5 +#include <linux/uwb/debug.h> + +enum { + /* This is only for Next and Last TX packets */ + i1480u_MAX_PL_SIZE = i1480u_MAX_FRG_SIZE + - sizeof(struct untd_hdr_rst), +}; + +/** Free resources allocated to a i1480u tx context. */ +static +void i1480u_tx_free(struct i1480u_tx *wtx) +{ + kfree(wtx->buf); + if (wtx->skb) + dev_kfree_skb_irq(wtx->skb); + usb_free_urb(wtx->urb); + kfree(wtx); +} + +static +void i1480u_tx_destroy(struct i1480u *i1480u, struct i1480u_tx *wtx) +{ + unsigned long flags; + spin_lock_irqsave(&i1480u->tx_list_lock, flags); /* not active any more */ + list_del(&wtx->list_node); + i1480u_tx_free(wtx); + spin_unlock_irqrestore(&i1480u->tx_list_lock, flags); +} + +static +void i1480u_tx_unlink_urbs(struct i1480u *i1480u) +{ + unsigned long flags; + struct i1480u_tx *wtx, *next; + + spin_lock_irqsave(&i1480u->tx_list_lock, flags); + list_for_each_entry_safe(wtx, next, &i1480u->tx_list, list_node) { + usb_unlink_urb(wtx->urb); + } + spin_unlock_irqrestore(&i1480u->tx_list_lock, flags); +} + + +/** + * Callback for a completed tx USB URB. + * + * TODO: + * + * - FIXME: recover errors more gracefully + * - FIXME: handle NAKs (I dont think they come here) for flow ctl + */ +static +void i1480u_tx_cb(struct urb *urb) +{ + struct i1480u_tx *wtx = urb->context; + struct i1480u *i1480u = wtx->i1480u; + struct net_device *net_dev = i1480u->net_dev; + struct device *dev = &i1480u->usb_iface->dev; + unsigned long flags; + + switch (urb->status) { + case 0: + spin_lock_irqsave(&i1480u->lock, flags); + i1480u->stats.tx_packets++; + i1480u->stats.tx_bytes += urb->actual_length; + spin_unlock_irqrestore(&i1480u->lock, flags); + break; + case -ECONNRESET: /* Not an error, but a controlled situation; */ + case -ENOENT: /* (we killed the URB)...so, no broadcast */ + dev_dbg(dev, "notif endp: reset/noent %d\n", urb->status); + netif_stop_queue(net_dev); + break; + case -ESHUTDOWN: /* going away! */ + dev_dbg(dev, "notif endp: down %d\n", urb->status); + netif_stop_queue(net_dev); + break; + default: + dev_err(dev, "TX: unknown URB status %d\n", urb->status); + if (edc_inc(&i1480u->tx_errors, EDC_MAX_ERRORS, + EDC_ERROR_TIMEFRAME)) { + dev_err(dev, "TX: max acceptable errors exceeded." + "Reset device.\n"); + netif_stop_queue(net_dev); + i1480u_tx_unlink_urbs(i1480u); + wlp_reset_all(&i1480u->wlp); + } + break; + } + i1480u_tx_destroy(i1480u, wtx); + if (atomic_dec_return(&i1480u->tx_inflight.count) + <= i1480u->tx_inflight.threshold + && netif_queue_stopped(net_dev) + && i1480u->tx_inflight.threshold != 0) { + if (d_test(2) && printk_ratelimit()) + d_printf(2, dev, "Restart queue. \n"); + netif_start_queue(net_dev); + atomic_inc(&i1480u->tx_inflight.restart_count); + } + return; +} + + +/** + * Given a buffer that doesn't fit in a single fragment, create an + * scatter/gather structure for delivery to the USB pipe. + * + * Implements functionality of i1480u_tx_create(). + * + * @wtx: tx descriptor + * @skb: skb to send + * @gfp_mask: gfp allocation mask + * @returns: Pointer to @wtx if ok, NULL on error. + * + * Sorry, TOO LONG a function, but breaking it up is kind of hard + * + * This will break the buffer in chunks smaller than + * i1480u_MAX_FRG_SIZE (including the header) and add proper headers + * to each: + * + * 1st header \ + * i1480 tx header | fragment 1 + * fragment data / + * nxt header \ fragment 2 + * fragment data / + * .. + * .. + * last header \ fragment 3 + * last fragment data / + * + * This does not fill the i1480 TX header, it is left up to the + * caller to do that; you can get it from @wtx->wlp_tx_hdr. + * + * This function consumes the skb unless there is an error. + */ +static +int i1480u_tx_create_n(struct i1480u_tx *wtx, struct sk_buff *skb, + gfp_t gfp_mask) +{ + int result; + void *pl; + size_t pl_size; + + void *pl_itr, *buf_itr; + size_t pl_size_left, frgs, pl_size_1st, frg_pl_size = 0; + struct untd_hdr_1st *untd_hdr_1st; + struct wlp_tx_hdr *wlp_tx_hdr; + struct untd_hdr_rst *untd_hdr_rst; + + wtx->skb = NULL; + pl = skb->data; + pl_itr = pl; + pl_size = skb->len; + pl_size_left = pl_size; /* payload size */ + /* First fragment; fits as much as i1480u_MAX_FRG_SIZE minus + * the headers */ + pl_size_1st = i1480u_MAX_FRG_SIZE + - sizeof(struct untd_hdr_1st) - sizeof(struct wlp_tx_hdr); + BUG_ON(pl_size_1st > pl_size); + pl_size_left -= pl_size_1st; + /* The rest have an smaller header (no i1480 TX header). We + * need to break up the payload in blocks smaller than + * i1480u_MAX_PL_SIZE (payload excluding header). */ + frgs = (pl_size_left + i1480u_MAX_PL_SIZE - 1) / i1480u_MAX_PL_SIZE; + /* Allocate space for the new buffer. In this new buffer we'll + * place the headers followed by the data fragment, headers, + * data fragments, etc.. + */ + result = -ENOMEM; + wtx->buf_size = sizeof(*untd_hdr_1st) + + sizeof(*wlp_tx_hdr) + + frgs * sizeof(*untd_hdr_rst) + + pl_size; + wtx->buf = kmalloc(wtx->buf_size, gfp_mask); + if (wtx->buf == NULL) + goto error_buf_alloc; + + buf_itr = wtx->buf; /* We got the space, let's fill it up */ + /* Fill 1st fragment */ + untd_hdr_1st = buf_itr; + buf_itr += sizeof(*untd_hdr_1st); + untd_hdr_set_type(&untd_hdr_1st->hdr, i1480u_PKT_FRAG_1ST); + untd_hdr_set_rx_tx(&untd_hdr_1st->hdr, 0); + untd_hdr_1st->hdr.len = cpu_to_le16(pl_size + sizeof(*wlp_tx_hdr)); + untd_hdr_1st->fragment_len = + cpu_to_le16(pl_size_1st + sizeof(*wlp_tx_hdr)); + memset(untd_hdr_1st->padding, 0, sizeof(untd_hdr_1st->padding)); + /* Set up i1480 header info */ + wlp_tx_hdr = wtx->wlp_tx_hdr = buf_itr; + buf_itr += sizeof(*wlp_tx_hdr); + /* Copy the first fragment */ + memcpy(buf_itr, pl_itr, pl_size_1st); + pl_itr += pl_size_1st; + buf_itr += pl_size_1st; + + /* Now do each remaining fragment */ + result = -EINVAL; + while (pl_size_left > 0) { + d_printf(5, NULL, "ITR HDR: pl_size_left %zu buf_itr %zu\n", + pl_size_left, buf_itr - wtx->buf); + if (buf_itr + sizeof(*untd_hdr_rst) - wtx->buf + > wtx->buf_size) { + printk(KERN_ERR "BUG: no space for header\n"); + goto error_bug; + } + d_printf(5, NULL, "ITR HDR 2: pl_size_left %zu buf_itr %zu\n", + pl_size_left, buf_itr - wtx->buf); + untd_hdr_rst = buf_itr; + buf_itr += sizeof(*untd_hdr_rst); + if (pl_size_left > i1480u_MAX_PL_SIZE) { + frg_pl_size = i1480u_MAX_PL_SIZE; + untd_hdr_set_type(&untd_hdr_rst->hdr, i1480u_PKT_FRAG_NXT); + } else { + frg_pl_size = pl_size_left; + untd_hdr_set_type(&untd_hdr_rst->hdr, i1480u_PKT_FRAG_LST); + } + d_printf(5, NULL, + "ITR PL: pl_size_left %zu buf_itr %zu frg_pl_size %zu\n", + pl_size_left, buf_itr - wtx->buf, frg_pl_size); + untd_hdr_set_rx_tx(&untd_hdr_rst->hdr, 0); + untd_hdr_rst->hdr.len = cpu_to_le16(frg_pl_size); + untd_hdr_rst->padding = 0; + if (buf_itr + frg_pl_size - wtx->buf + > wtx->buf_size) { + printk(KERN_ERR "BUG: no space for payload\n"); + goto error_bug; + } + memcpy(buf_itr, pl_itr, frg_pl_size); + buf_itr += frg_pl_size; + pl_itr += frg_pl_size; + pl_size_left -= frg_pl_size; + d_printf(5, NULL, + "ITR PL 2: pl_size_left %zu buf_itr %zu frg_pl_size %zu\n", + pl_size_left, buf_itr - wtx->buf, frg_pl_size); + } + dev_kfree_skb_irq(skb); + return 0; + +error_bug: + printk(KERN_ERR + "BUG: skb %u bytes\n" + "BUG: frg_pl_size %zd i1480u_MAX_FRG_SIZE %u\n" + "BUG: buf_itr %zu buf_size %zu pl_size_left %zu\n", + skb->len, + frg_pl_size, i1480u_MAX_FRG_SIZE, + buf_itr - wtx->buf, wtx->buf_size, pl_size_left); + + kfree(wtx->buf); +error_buf_alloc: + return result; +} + + +/** + * Given a buffer that fits in a single fragment, fill out a @wtx + * struct for transmitting it down the USB pipe. + * + * Uses the fact that we have space reserved in front of the skbuff + * for hardware headers :] + * + * This does not fill the i1480 TX header, it is left up to the + * caller to do that; you can get it from @wtx->wlp_tx_hdr. + * + * @pl: pointer to payload data + * @pl_size: size of the payuload + * + * This function does not consume the @skb. + */ +static +int i1480u_tx_create_1(struct i1480u_tx *wtx, struct sk_buff *skb, + gfp_t gfp_mask) +{ + struct untd_hdr_cmp *untd_hdr_cmp; + struct wlp_tx_hdr *wlp_tx_hdr; + + wtx->buf = NULL; + wtx->skb = skb; + BUG_ON(skb_headroom(skb) < sizeof(*wlp_tx_hdr)); + wlp_tx_hdr = (void *) __skb_push(skb, sizeof(*wlp_tx_hdr)); + wtx->wlp_tx_hdr = wlp_tx_hdr; + BUG_ON(skb_headroom(skb) < sizeof(*untd_hdr_cmp)); + untd_hdr_cmp = (void *) __skb_push(skb, sizeof(*untd_hdr_cmp)); + + untd_hdr_set_type(&untd_hdr_cmp->hdr, i1480u_PKT_FRAG_CMP); + untd_hdr_set_rx_tx(&untd_hdr_cmp->hdr, 0); + untd_hdr_cmp->hdr.len = cpu_to_le16(skb->len - sizeof(*untd_hdr_cmp)); + untd_hdr_cmp->padding = 0; + return 0; +} + + +/** + * Given a skb to transmit, massage it to become palatable for the TX pipe + * + * This will break the buffer in chunks smaller than + * i1480u_MAX_FRG_SIZE and add proper headers to each. + * + * 1st header \ + * i1480 tx header | fragment 1 + * fragment data / + * nxt header \ fragment 2 + * fragment data / + * .. + * .. + * last header \ fragment 3 + * last fragment data / + * + * Each fragment will be always smaller or equal to i1480u_MAX_FRG_SIZE. + * + * If the first fragment is smaller than i1480u_MAX_FRG_SIZE, then the + * following is composed: + * + * complete header \ + * i1480 tx header | single fragment + * packet data / + * + * We were going to use s/g support, but because the interface is + * synch and at the end there is plenty of overhead to do it, it + * didn't seem that worth for data that is going to be smaller than + * one page. + */ +static +struct i1480u_tx *i1480u_tx_create(struct i1480u *i1480u, + struct sk_buff *skb, gfp_t gfp_mask) +{ + int result; + struct usb_endpoint_descriptor *epd; + int usb_pipe; + unsigned long flags; + + struct i1480u_tx *wtx; + const size_t pl_max_size = + i1480u_MAX_FRG_SIZE - sizeof(struct untd_hdr_cmp) + - sizeof(struct wlp_tx_hdr); + + wtx = kmalloc(sizeof(*wtx), gfp_mask); + if (wtx == NULL) + goto error_wtx_alloc; + wtx->urb = usb_alloc_urb(0, gfp_mask); + if (wtx->urb == NULL) + goto error_urb_alloc; + epd = &i1480u->usb_iface->cur_altsetting->endpoint[2].desc; + usb_pipe = usb_sndbulkpipe(i1480u->usb_dev, epd->bEndpointAddress); + /* Fits in a single complete packet or need to split? */ + if (skb->len > pl_max_size) { + result = i1480u_tx_create_n(wtx, skb, gfp_mask); + if (result < 0) + goto error_create; + usb_fill_bulk_urb(wtx->urb, i1480u->usb_dev, usb_pipe, + wtx->buf, wtx->buf_size, i1480u_tx_cb, wtx); + } else { + result = i1480u_tx_create_1(wtx, skb, gfp_mask); + if (result < 0) + goto error_create; + usb_fill_bulk_urb(wtx->urb, i1480u->usb_dev, usb_pipe, + skb->data, skb->len, i1480u_tx_cb, wtx); + } + spin_lock_irqsave(&i1480u->tx_list_lock, flags); + list_add(&wtx->list_node, &i1480u->tx_list); + spin_unlock_irqrestore(&i1480u->tx_list_lock, flags); + return wtx; + +error_create: + kfree(wtx->urb); +error_urb_alloc: + kfree(wtx); +error_wtx_alloc: + return NULL; +} + +/** + * Actual fragmentation and transmission of frame + * + * @wlp: WLP substack data structure + * @skb: To be transmitted + * @dst: Device address of destination + * @returns: 0 on success, <0 on failure + * + * This function can also be called directly (not just from + * hard_start_xmit), so we also check here if the interface is up before + * taking sending anything. + */ +int i1480u_xmit_frame(struct wlp *wlp, struct sk_buff *skb, + struct uwb_dev_addr *dst) +{ + int result = -ENXIO; + struct i1480u *i1480u = container_of(wlp, struct i1480u, wlp); + struct device *dev = &i1480u->usb_iface->dev; + struct net_device *net_dev = i1480u->net_dev; + struct i1480u_tx *wtx; + struct wlp_tx_hdr *wlp_tx_hdr; + static unsigned char dev_bcast[2] = { 0xff, 0xff }; +#if 0 + int lockup = 50; +#endif + + d_fnstart(6, dev, "(skb %p (%u), net_dev %p)\n", skb, skb->len, + net_dev); + BUG_ON(i1480u->wlp.rc == NULL); + if ((net_dev->flags & IFF_UP) == 0) + goto out; + result = -EBUSY; + if (atomic_read(&i1480u->tx_inflight.count) >= i1480u->tx_inflight.max) { + if (d_test(2) && printk_ratelimit()) + d_printf(2, dev, "Max frames in flight " + "stopping queue.\n"); + netif_stop_queue(net_dev); + goto error_max_inflight; + } + result = -ENOMEM; + wtx = i1480u_tx_create(i1480u, skb, GFP_ATOMIC); + if (unlikely(wtx == NULL)) { + if (printk_ratelimit()) + dev_err(dev, "TX: no memory for WLP TX URB," + "dropping packet (in flight %d)\n", + atomic_read(&i1480u->tx_inflight.count)); + netif_stop_queue(net_dev); + goto error_wtx_alloc; + } + wtx->i1480u = i1480u; + /* Fill out the i1480 header; @i1480u->def_tx_hdr read without + * locking. We do so because they are kind of orthogonal to + * each other (and thus not changed in an atomic batch). + * The ETH header is right after the WLP TX header. */ + wlp_tx_hdr = wtx->wlp_tx_hdr; + *wlp_tx_hdr = i1480u->options.def_tx_hdr; + wlp_tx_hdr->dstaddr = *dst; + if (!memcmp(&wlp_tx_hdr->dstaddr, dev_bcast, sizeof(dev_bcast)) + && (wlp_tx_hdr_delivery_id_type(wlp_tx_hdr) & WLP_DRP)) { + /*Broadcast message directed to DRP host. Send as best effort + * on PCA. */ + wlp_tx_hdr_set_delivery_id_type(wlp_tx_hdr, i1480u->options.pca_base_priority); + } + +#if 0 + dev_info(dev, "TX delivering skb -> USB, %zu bytes\n", skb->len); + dump_bytes(dev, skb->data, skb->len > 72 ? 72 : skb->len); +#endif +#if 0 + /* simulates a device lockup after every lockup# packets */ + if (lockup && ((i1480u->stats.tx_packets + 1) % lockup) == 0) { + /* Simulate a dropped transmit interrupt */ + net_dev->trans_start = jiffies; + netif_stop_queue(net_dev); + dev_err(dev, "Simulate lockup at %ld\n", jiffies); + return result; + } +#endif + + result = usb_submit_urb(wtx->urb, GFP_ATOMIC); /* Go baby */ + if (result < 0) { + dev_err(dev, "TX: cannot submit URB: %d\n", result); + /* We leave the freeing of skb to calling function */ + wtx->skb = NULL; + goto error_tx_urb_submit; + } + atomic_inc(&i1480u->tx_inflight.count); + net_dev->trans_start = jiffies; + d_fnend(6, dev, "(skb %p (%u), net_dev %p) = %d\n", skb, skb->len, + net_dev, result); + return result; + +error_tx_urb_submit: + i1480u_tx_destroy(i1480u, wtx); +error_wtx_alloc: +error_max_inflight: +out: + d_fnend(6, dev, "(skb %p (%u), net_dev %p) = %d\n", skb, skb->len, + net_dev, result); + return result; +} + + +/** + * Transmit an skb Called when an skbuf has to be transmitted + * + * The skb is first passed to WLP substack to ensure this is a valid + * frame. If valid the device address of destination will be filled and + * the WLP header prepended to the skb. If this step fails we fake sending + * the frame, if we return an error the network stack will just keep trying. + * + * Broadcast frames inside a WSS needs to be treated special as multicast is + * not supported. A broadcast frame is sent as unicast to each member of the + * WSS - this is done by the WLP substack when it finds a broadcast frame. + * So, we test if the WLP substack took over the skb and only transmit it + * if it has not (been taken over). + * + * @net_dev->xmit_lock is held + */ +int i1480u_hard_start_xmit(struct sk_buff *skb, struct net_device *net_dev) +{ + int result; + struct i1480u *i1480u = netdev_priv(net_dev); + struct device *dev = &i1480u->usb_iface->dev; + struct uwb_dev_addr dst; + + d_fnstart(6, dev, "(skb %p (%u), net_dev %p)\n", skb, skb->len, + net_dev); + BUG_ON(i1480u->wlp.rc == NULL); + if ((net_dev->flags & IFF_UP) == 0) + goto error; + result = wlp_prepare_tx_frame(dev, &i1480u->wlp, skb, &dst); + if (result < 0) { + dev_err(dev, "WLP verification of TX frame failed (%d). " + "Dropping packet.\n", result); + goto error; + } else if (result == 1) { + d_printf(6, dev, "WLP will transmit frame. \n"); + /* trans_start time will be set when WLP actually transmits + * the frame */ + goto out; + } + d_printf(6, dev, "Transmitting frame. \n"); + result = i1480u_xmit_frame(&i1480u->wlp, skb, &dst); + if (result < 0) { + dev_err(dev, "Frame TX failed (%d).\n", result); + goto error; + } + d_fnend(6, dev, "(skb %p (%u), net_dev %p) = %d\n", skb, skb->len, + net_dev, result); + return NETDEV_TX_OK; +error: + dev_kfree_skb_any(skb); + i1480u->stats.tx_dropped++; +out: + d_fnend(6, dev, "(skb %p (%u), net_dev %p) = %d\n", skb, skb->len, + net_dev, result); + return NETDEV_TX_OK; +} + + +/** + * Called when a pkt transmission doesn't complete in a reasonable period + * Device reset may sleep - do it outside of interrupt context (delayed) + */ +void i1480u_tx_timeout(struct net_device *net_dev) +{ + struct i1480u *i1480u = netdev_priv(net_dev); + + wlp_reset_all(&i1480u->wlp); +} + + +void i1480u_tx_release(struct i1480u *i1480u) +{ + unsigned long flags; + struct i1480u_tx *wtx, *next; + int count = 0, empty; + + spin_lock_irqsave(&i1480u->tx_list_lock, flags); + list_for_each_entry_safe(wtx, next, &i1480u->tx_list, list_node) { + count++; + usb_unlink_urb(wtx->urb); + } + spin_unlock_irqrestore(&i1480u->tx_list_lock, flags); + count = count*10; /* i1480ut 200ms per unlinked urb (intervals of 20ms) */ + /* + * We don't like this sollution too much (dirty as it is), but + * it is cheaper than putting a refcount on each i1480u_tx and + * i1480uting for all of them to go away... + * + * Called when no more packets can be added to tx_list + * so can i1480ut for it to be empty. + */ + while (1) { + spin_lock_irqsave(&i1480u->tx_list_lock, flags); + empty = list_empty(&i1480u->tx_list); + spin_unlock_irqrestore(&i1480u->tx_list_lock, flags); + if (empty) + break; + count--; + BUG_ON(count == 0); + msleep(20); + } +} diff --git a/drivers/uwb/ie.c b/drivers/uwb/ie.c new file mode 100644 index 000000000000..cf6f3d152b9d --- /dev/null +++ b/drivers/uwb/ie.c @@ -0,0 +1,541 @@ +/* + * Ultra Wide Band + * Information Element Handling + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include "uwb-internal.h" +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +/** + * uwb_ie_next - get the next IE in a buffer + * @ptr: start of the buffer containing the IE data + * @len: length of the buffer + * + * Both @ptr and @len are updated so subsequent calls to uwb_ie_next() + * will get the next IE. + * + * NULL is returned (and @ptr and @len will not be updated) if there + * are no more IEs in the buffer or the buffer is too short. + */ +struct uwb_ie_hdr *uwb_ie_next(void **ptr, size_t *len) +{ + struct uwb_ie_hdr *hdr; + size_t ie_len; + + if (*len < sizeof(struct uwb_ie_hdr)) + return NULL; + + hdr = *ptr; + ie_len = sizeof(struct uwb_ie_hdr) + hdr->length; + + if (*len < ie_len) + return NULL; + + *ptr += ie_len; + *len -= ie_len; + + return hdr; +} +EXPORT_SYMBOL_GPL(uwb_ie_next); + +/** + * Get the IEs that a radio controller is sending in its beacon + * + * @uwb_rc: UWB Radio Controller + * @returns: Size read from the system + * + * We don't need to lock the uwb_rc's mutex because we don't modify + * anything. Once done with the iedata buffer, call + * uwb_rc_ie_release(iedata). Don't call kfree on it. + */ +ssize_t uwb_rc_get_ie(struct uwb_rc *uwb_rc, struct uwb_rc_evt_get_ie **pget_ie) +{ + ssize_t result; + struct device *dev = &uwb_rc->uwb_dev.dev; + struct uwb_rccb *cmd = NULL; + struct uwb_rceb *reply = NULL; + struct uwb_rc_evt_get_ie *get_ie; + + d_fnstart(3, dev, "(%p, %p)\n", uwb_rc, pget_ie); + result = -ENOMEM; + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + goto error_kzalloc; + cmd->bCommandType = UWB_RC_CET_GENERAL; + cmd->wCommand = cpu_to_le16(UWB_RC_CMD_GET_IE); + result = uwb_rc_vcmd(uwb_rc, "GET_IE", cmd, sizeof(*cmd), + UWB_RC_CET_GENERAL, UWB_RC_CMD_GET_IE, + &reply); + if (result < 0) + goto error_cmd; + get_ie = container_of(reply, struct uwb_rc_evt_get_ie, rceb); + if (result < sizeof(*get_ie)) { + dev_err(dev, "not enough data returned for decoding GET IE " + "(%zu bytes received vs %zu needed)\n", + result, sizeof(*get_ie)); + result = -EINVAL; + } else if (result < sizeof(*get_ie) + le16_to_cpu(get_ie->wIELength)) { + dev_err(dev, "not enough data returned for decoding GET IE " + "payload (%zu bytes received vs %zu needed)\n", result, + sizeof(*get_ie) + le16_to_cpu(get_ie->wIELength)); + result = -EINVAL; + } else + *pget_ie = get_ie; +error_cmd: + kfree(cmd); +error_kzalloc: + d_fnend(3, dev, "(%p, %p) = %d\n", uwb_rc, pget_ie, (int)result); + return result; +} +EXPORT_SYMBOL_GPL(uwb_rc_get_ie); + + +/* + * Given a pointer to an IE, print it in ASCII/hex followed by a new line + * + * @ie_hdr: pointer to the IE header. Length is in there, and it is + * guaranteed that the ie_hdr->length bytes following it are + * safely accesible. + * + * @_data: context data passed from uwb_ie_for_each(), an struct output_ctx + */ +int uwb_ie_dump_hex(struct uwb_dev *uwb_dev, const struct uwb_ie_hdr *ie_hdr, + size_t offset, void *_ctx) +{ + struct uwb_buf_ctx *ctx = _ctx; + const u8 *pl = (void *)(ie_hdr + 1); + u8 pl_itr; + + ctx->bytes += scnprintf(ctx->buf + ctx->bytes, ctx->size - ctx->bytes, + "%02x %02x ", (unsigned) ie_hdr->element_id, + (unsigned) ie_hdr->length); + pl_itr = 0; + while (pl_itr < ie_hdr->length && ctx->bytes < ctx->size) + ctx->bytes += scnprintf(ctx->buf + ctx->bytes, + ctx->size - ctx->bytes, + "%02x ", (unsigned) pl[pl_itr++]); + if (ctx->bytes < ctx->size) + ctx->buf[ctx->bytes++] = '\n'; + return 0; +} +EXPORT_SYMBOL_GPL(uwb_ie_dump_hex); + + +/** + * Verify that a pointer in a buffer points to valid IE + * + * @start: pointer to start of buffer in which IE appears + * @itr: pointer to IE inside buffer that will be verified + * @top: pointer to end of buffer + * + * @returns: 0 if IE is valid, <0 otherwise + * + * Verification involves checking that the buffer can contain a + * header and the amount of data reported in the IE header can be found in + * the buffer. + */ +static +int uwb_rc_ie_verify(struct uwb_dev *uwb_dev, const void *start, + const void *itr, const void *top) +{ + struct device *dev = &uwb_dev->dev; + const struct uwb_ie_hdr *ie_hdr; + + if (top - itr < sizeof(*ie_hdr)) { + dev_err(dev, "Bad IE: no data to decode header " + "(%zu bytes left vs %zu needed) at offset %zu\n", + top - itr, sizeof(*ie_hdr), itr - start); + return -EINVAL; + } + ie_hdr = itr; + itr += sizeof(*ie_hdr); + if (top - itr < ie_hdr->length) { + dev_err(dev, "Bad IE: not enough data for payload " + "(%zu bytes left vs %zu needed) at offset %zu\n", + top - itr, (size_t)ie_hdr->length, + (void *)ie_hdr - start); + return -EINVAL; + } + return 0; +} + + +/** + * Walk a buffer filled with consecutive IE's a buffer + * + * @uwb_dev: UWB device this IEs belong to (for err messages mainly) + * + * @fn: function to call with each IE; if it returns 0, we keep + * traversing the buffer. If it returns !0, we'll stop and return + * that value. + * + * @data: pointer passed to @fn + * + * @buf: buffer where the consecutive IEs are located + * + * @size: size of @buf + * + * Each IE is checked for basic correctness (there is space left for + * the header and the payload). If that test is failed, we stop + * processing. For every good IE, @fn is called. + */ +ssize_t uwb_ie_for_each(struct uwb_dev *uwb_dev, uwb_ie_f fn, void *data, + const void *buf, size_t size) +{ + ssize_t result = 0; + const struct uwb_ie_hdr *ie_hdr; + const void *itr = buf, *top = itr + size; + + while (itr < top) { + if (uwb_rc_ie_verify(uwb_dev, buf, itr, top) != 0) + break; + ie_hdr = itr; + itr += sizeof(*ie_hdr) + ie_hdr->length; + result = fn(uwb_dev, ie_hdr, itr - buf, data); + if (result != 0) + break; + } + return result; +} +EXPORT_SYMBOL_GPL(uwb_ie_for_each); + + +/** + * Replace all IEs currently being transmitted by a device + * + * @cmd: pointer to the SET-IE command with the IEs to set + * @size: size of @buf + */ +int uwb_rc_set_ie(struct uwb_rc *rc, struct uwb_rc_cmd_set_ie *cmd) +{ + int result; + struct device *dev = &rc->uwb_dev.dev; + struct uwb_rc_evt_set_ie reply; + + reply.rceb.bEventType = UWB_RC_CET_GENERAL; + reply.rceb.wEvent = UWB_RC_CMD_SET_IE; + result = uwb_rc_cmd(rc, "SET-IE", &cmd->rccb, + sizeof(*cmd) + le16_to_cpu(cmd->wIELength), + &reply.rceb, sizeof(reply)); + if (result < 0) + goto error_cmd; + else if (result != sizeof(reply)) { + dev_err(dev, "SET-IE: not enough data to decode reply " + "(%d bytes received vs %zu needed)\n", + result, sizeof(reply)); + result = -EIO; + } else if (reply.bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(dev, "SET-IE: command execution failed: %s (%d)\n", + uwb_rc_strerror(reply.bResultCode), reply.bResultCode); + result = -EIO; + } else + result = 0; +error_cmd: + return result; +} + +/** + * Determine by IE id if IE is host settable + * WUSB 1.0 [8.6.2.8 Table 8.85] + * + * EXCEPTION: + * All but UWB_IE_WLP appears in Table 8.85 from WUSB 1.0. Setting this IE + * is required for the WLP substack to perform association with its WSS so + * we hope that the WUSB spec will be changed to reflect this. + */ +static +int uwb_rc_ie_is_host_settable(enum uwb_ie element_id) +{ + if (element_id == UWB_PCA_AVAILABILITY || + element_id == UWB_BP_SWITCH_IE || + element_id == UWB_MAC_CAPABILITIES_IE || + element_id == UWB_PHY_CAPABILITIES_IE || + element_id == UWB_APP_SPEC_PROBE_IE || + element_id == UWB_IDENTIFICATION_IE || + element_id == UWB_MASTER_KEY_ID_IE || + element_id == UWB_IE_WLP || + element_id == UWB_APP_SPEC_IE) + return 1; + return 0; +} + + +/** + * Extract Host Settable IEs from IE + * + * @ie_data: pointer to buffer containing all IEs + * @size: size of buffer + * + * @returns: length of buffer that only includes host settable IEs + * + * Given a buffer of IEs we move all Host Settable IEs to front of buffer + * by overwriting the IEs that are not Host Settable. + * Buffer length is adjusted accordingly. + */ +static +ssize_t uwb_rc_parse_host_settable_ie(struct uwb_dev *uwb_dev, + void *ie_data, size_t size) +{ + size_t new_len = size; + struct uwb_ie_hdr *ie_hdr; + size_t ie_length; + void *itr = ie_data, *top = itr + size; + + while (itr < top) { + if (uwb_rc_ie_verify(uwb_dev, ie_data, itr, top) != 0) + break; + ie_hdr = itr; + ie_length = sizeof(*ie_hdr) + ie_hdr->length; + if (uwb_rc_ie_is_host_settable(ie_hdr->element_id)) { + itr += ie_length; + } else { + memmove(itr, itr + ie_length, top - (itr + ie_length)); + new_len -= ie_length; + top -= ie_length; + } + } + return new_len; +} + + +/* Cleanup the whole IE management subsystem */ +void uwb_rc_ie_init(struct uwb_rc *uwb_rc) +{ + mutex_init(&uwb_rc->ies_mutex); +} + + +/** + * Set up cache for host settable IEs currently being transmitted + * + * First we just call GET-IE to get the current IEs being transmitted + * (or we workaround and pretend we did) and (because the format is + * the same) reuse that as the IE cache (with the command prefix, as + * explained in 'struct uwb_rc'). + * + * @returns: size of cache created + */ +ssize_t uwb_rc_ie_setup(struct uwb_rc *uwb_rc) +{ + struct device *dev = &uwb_rc->uwb_dev.dev; + ssize_t result; + size_t capacity; + struct uwb_rc_evt_get_ie *ie_info; + + d_fnstart(3, dev, "(%p)\n", uwb_rc); + mutex_lock(&uwb_rc->ies_mutex); + result = uwb_rc_get_ie(uwb_rc, &ie_info); + if (result < 0) + goto error_get_ie; + capacity = result; + d_printf(5, dev, "Got IEs %zu bytes (%zu long at %p)\n", result, + (size_t)le16_to_cpu(ie_info->wIELength), ie_info); + + /* Remove IEs that host should not set. */ + result = uwb_rc_parse_host_settable_ie(&uwb_rc->uwb_dev, + ie_info->IEData, le16_to_cpu(ie_info->wIELength)); + if (result < 0) + goto error_parse; + d_printf(5, dev, "purged non-settable IEs to %zu bytes\n", result); + uwb_rc->ies = (void *) ie_info; + uwb_rc->ies->rccb.bCommandType = UWB_RC_CET_GENERAL; + uwb_rc->ies->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_SET_IE); + uwb_rc->ies_capacity = capacity; + d_printf(5, dev, "IE cache at %p %zu bytes, %zu capacity\n", + ie_info, result, capacity); + result = 0; +error_parse: +error_get_ie: + mutex_unlock(&uwb_rc->ies_mutex); + d_fnend(3, dev, "(%p) = %zu\n", uwb_rc, result); + return result; +} + + +/* Cleanup the whole IE management subsystem */ +void uwb_rc_ie_release(struct uwb_rc *uwb_rc) +{ + kfree(uwb_rc->ies); + uwb_rc->ies = NULL; + uwb_rc->ies_capacity = 0; +} + + +static +int __acc_size(struct uwb_dev *uwb_dev, const struct uwb_ie_hdr *ie_hdr, + size_t offset, void *_ctx) +{ + size_t *acc_size = _ctx; + *acc_size += sizeof(*ie_hdr) + ie_hdr->length; + d_printf(6, &uwb_dev->dev, "new acc size %zu\n", *acc_size); + return 0; +} + + +/** + * Add a new IE to IEs currently being transmitted by device + * + * @ies: the buffer containing the new IE or IEs to be added to + * the device's beacon. The buffer will be verified for + * consistence (meaning the headers should be right) and + * consistent with the buffer size. + * @size: size of @ies (in bytes, total buffer size) + * @returns: 0 if ok, <0 errno code on error + * + * According to WHCI 0.95 [4.13.6] the driver will only receive the RCEB + * after the device sent the first beacon that includes the IEs specified + * in the SET IE command. We thus cannot send this command if the device is + * not beaconing. Instead, a SET IE command will be sent later right after + * we start beaconing. + * + * Setting an IE on the device will overwrite all current IEs in device. So + * we take the current IEs being transmitted by the device, append the + * new one, and call SET IE with all the IEs needed. + * + * The local IE cache will only be updated with the new IE if SET IE + * completed successfully. + */ +int uwb_rc_ie_add(struct uwb_rc *uwb_rc, + const struct uwb_ie_hdr *ies, size_t size) +{ + int result = 0; + struct device *dev = &uwb_rc->uwb_dev.dev; + struct uwb_rc_cmd_set_ie *new_ies; + size_t ies_size, total_size, acc_size = 0; + + if (uwb_rc->ies == NULL) + return -ESHUTDOWN; + uwb_ie_for_each(&uwb_rc->uwb_dev, __acc_size, &acc_size, ies, size); + if (acc_size != size) { + dev_err(dev, "BUG: bad IEs, misconstructed headers " + "[%zu bytes reported vs %zu calculated]\n", + size, acc_size); + WARN_ON(1); + return -EINVAL; + } + mutex_lock(&uwb_rc->ies_mutex); + ies_size = le16_to_cpu(uwb_rc->ies->wIELength); + total_size = sizeof(*uwb_rc->ies) + ies_size; + if (total_size + size > uwb_rc->ies_capacity) { + d_printf(4, dev, "Reallocating IE cache from %p capacity %zu " + "to capacity %zu\n", uwb_rc->ies, uwb_rc->ies_capacity, + total_size + size); + new_ies = kzalloc(total_size + size, GFP_KERNEL); + if (new_ies == NULL) { + dev_err(dev, "No memory for adding new IE\n"); + result = -ENOMEM; + goto error_alloc; + } + memcpy(new_ies, uwb_rc->ies, total_size); + uwb_rc->ies_capacity = total_size + size; + kfree(uwb_rc->ies); + uwb_rc->ies = new_ies; + d_printf(4, dev, "New IE cache at %p capacity %zu\n", + uwb_rc->ies, uwb_rc->ies_capacity); + } + memcpy((void *)uwb_rc->ies + total_size, ies, size); + uwb_rc->ies->wIELength = cpu_to_le16(ies_size + size); + if (uwb_rc->beaconing != -1) { + result = uwb_rc_set_ie(uwb_rc, uwb_rc->ies); + if (result < 0) { + dev_err(dev, "Cannot set new IE on device: %d\n", + result); + uwb_rc->ies->wIELength = cpu_to_le16(ies_size); + } else + result = 0; + } + d_printf(4, dev, "IEs now occupy %hu bytes of %zu capacity at %p\n", + le16_to_cpu(uwb_rc->ies->wIELength), uwb_rc->ies_capacity, + uwb_rc->ies); +error_alloc: + mutex_unlock(&uwb_rc->ies_mutex); + return result; +} +EXPORT_SYMBOL_GPL(uwb_rc_ie_add); + + +/* + * Remove an IE from internal cache + * + * We are dealing with our internal IE cache so no need to verify that the + * IEs are valid (it has been done already). + * + * Should be called with ies_mutex held + * + * We do not break out once an IE is found in the cache. It is currently + * possible to have more than one IE with the same ID included in the + * beacon. We don't reallocate, we just mark the size smaller. + */ +static +int uwb_rc_ie_cache_rm(struct uwb_rc *uwb_rc, enum uwb_ie to_remove) +{ + struct uwb_ie_hdr *ie_hdr; + size_t new_len = le16_to_cpu(uwb_rc->ies->wIELength); + void *itr = uwb_rc->ies->IEData; + void *top = itr + new_len; + + while (itr < top) { + ie_hdr = itr; + if (ie_hdr->element_id != to_remove) { + itr += sizeof(*ie_hdr) + ie_hdr->length; + } else { + int ie_length; + ie_length = sizeof(*ie_hdr) + ie_hdr->length; + if (top - itr != ie_length) + memmove(itr, itr + ie_length, top - itr + ie_length); + top -= ie_length; + new_len -= ie_length; + } + } + uwb_rc->ies->wIELength = cpu_to_le16(new_len); + return 0; +} + + +/** + * Remove an IE currently being transmitted by device + * + * @element_id: id of IE to be removed from device's beacon + */ +int uwb_rc_ie_rm(struct uwb_rc *uwb_rc, enum uwb_ie element_id) +{ + struct device *dev = &uwb_rc->uwb_dev.dev; + int result; + + if (uwb_rc->ies == NULL) + return -ESHUTDOWN; + mutex_lock(&uwb_rc->ies_mutex); + result = uwb_rc_ie_cache_rm(uwb_rc, element_id); + if (result < 0) + dev_err(dev, "Cannot remove IE from cache.\n"); + if (uwb_rc->beaconing != -1) { + result = uwb_rc_set_ie(uwb_rc, uwb_rc->ies); + if (result < 0) + dev_err(dev, "Cannot set new IE on device.\n"); + } + mutex_unlock(&uwb_rc->ies_mutex); + return result; +} +EXPORT_SYMBOL_GPL(uwb_rc_ie_rm); diff --git a/drivers/uwb/lc-dev.c b/drivers/uwb/lc-dev.c new file mode 100644 index 000000000000..15f856c9689a --- /dev/null +++ b/drivers/uwb/lc-dev.c @@ -0,0 +1,492 @@ +/* + * Ultra Wide Band + * Life cycle of devices + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/kdev_t.h> +#include <linux/random.h> +#include "uwb-internal.h" + +#define D_LOCAL 1 +#include <linux/uwb/debug.h> + + +/* We initialize addresses to 0xff (invalid, as it is bcast) */ +static inline void uwb_dev_addr_init(struct uwb_dev_addr *addr) +{ + memset(&addr->data, 0xff, sizeof(addr->data)); +} + +static inline void uwb_mac_addr_init(struct uwb_mac_addr *addr) +{ + memset(&addr->data, 0xff, sizeof(addr->data)); +} + +/* @returns !0 if a device @addr is a broadcast address */ +static inline int uwb_dev_addr_bcast(const struct uwb_dev_addr *addr) +{ + static const struct uwb_dev_addr bcast = { .data = { 0xff, 0xff } }; + return !uwb_dev_addr_cmp(addr, &bcast); +} + +/* + * Add callback @new to be called when an event occurs in @rc. + */ +int uwb_notifs_register(struct uwb_rc *rc, struct uwb_notifs_handler *new) +{ + if (mutex_lock_interruptible(&rc->notifs_chain.mutex)) + return -ERESTARTSYS; + list_add(&new->list_node, &rc->notifs_chain.list); + mutex_unlock(&rc->notifs_chain.mutex); + return 0; +} +EXPORT_SYMBOL_GPL(uwb_notifs_register); + +/* + * Remove event handler (callback) + */ +int uwb_notifs_deregister(struct uwb_rc *rc, struct uwb_notifs_handler *entry) +{ + if (mutex_lock_interruptible(&rc->notifs_chain.mutex)) + return -ERESTARTSYS; + list_del(&entry->list_node); + mutex_unlock(&rc->notifs_chain.mutex); + return 0; +} +EXPORT_SYMBOL_GPL(uwb_notifs_deregister); + +/* + * Notify all event handlers of a given event on @rc + * + * We are called with a valid reference to the device, or NULL if the + * event is not for a particular event (e.g., a BG join event). + */ +void uwb_notify(struct uwb_rc *rc, struct uwb_dev *uwb_dev, enum uwb_notifs event) +{ + struct uwb_notifs_handler *handler; + if (mutex_lock_interruptible(&rc->notifs_chain.mutex)) + return; + if (!list_empty(&rc->notifs_chain.list)) { + list_for_each_entry(handler, &rc->notifs_chain.list, list_node) { + handler->cb(handler->data, uwb_dev, event); + } + } + mutex_unlock(&rc->notifs_chain.mutex); +} + +/* + * Release the backing device of a uwb_dev that has been dynamically allocated. + */ +static void uwb_dev_sys_release(struct device *dev) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + + d_fnstart(4, NULL, "(dev %p uwb_dev %p)\n", dev, uwb_dev); + uwb_bce_put(uwb_dev->bce); + d_printf(0, &uwb_dev->dev, "uwb_dev %p freed\n", uwb_dev); + memset(uwb_dev, 0x69, sizeof(*uwb_dev)); + kfree(uwb_dev); + d_fnend(4, NULL, "(dev %p uwb_dev %p) = void\n", dev, uwb_dev); +} + +/* + * Initialize a UWB device instance + * + * Alloc, zero and call this function. + */ +void uwb_dev_init(struct uwb_dev *uwb_dev) +{ + mutex_init(&uwb_dev->mutex); + device_initialize(&uwb_dev->dev); + uwb_dev->dev.release = uwb_dev_sys_release; + uwb_dev_addr_init(&uwb_dev->dev_addr); + uwb_mac_addr_init(&uwb_dev->mac_addr); + bitmap_fill(uwb_dev->streams, UWB_NUM_GLOBAL_STREAMS); +} + +static ssize_t uwb_dev_EUI_48_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + char addr[UWB_ADDR_STRSIZE]; + + uwb_mac_addr_print(addr, sizeof(addr), &uwb_dev->mac_addr); + return sprintf(buf, "%s\n", addr); +} +static DEVICE_ATTR(EUI_48, S_IRUGO, uwb_dev_EUI_48_show, NULL); + +static ssize_t uwb_dev_DevAddr_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + char addr[UWB_ADDR_STRSIZE]; + + uwb_dev_addr_print(addr, sizeof(addr), &uwb_dev->dev_addr); + return sprintf(buf, "%s\n", addr); +} +static DEVICE_ATTR(DevAddr, S_IRUGO, uwb_dev_DevAddr_show, NULL); + +/* + * Show the BPST of this device. + * + * Calculated from the receive time of the device's beacon and it's + * slot number. + */ +static ssize_t uwb_dev_BPST_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_beca_e *bce; + struct uwb_beacon_frame *bf; + u16 bpst; + + bce = uwb_dev->bce; + mutex_lock(&bce->mutex); + bf = (struct uwb_beacon_frame *)bce->be->BeaconInfo; + bpst = bce->be->wBPSTOffset + - (u16)(bf->Beacon_Slot_Number * UWB_BEACON_SLOT_LENGTH_US); + mutex_unlock(&bce->mutex); + + return sprintf(buf, "%d\n", bpst); +} +static DEVICE_ATTR(BPST, S_IRUGO, uwb_dev_BPST_show, NULL); + +/* + * Show the IEs a device is beaconing + * + * We need to access the beacon cache, so we just lock it really + * quick, print the IEs and unlock. + * + * We have a reference on the cache entry, so that should be + * quite safe. + */ +static ssize_t uwb_dev_IEs_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + + return uwb_bce_print_IEs(uwb_dev, uwb_dev->bce, buf, PAGE_SIZE); +} +static DEVICE_ATTR(IEs, S_IRUGO | S_IWUSR, uwb_dev_IEs_show, NULL); + +static ssize_t uwb_dev_LQE_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_beca_e *bce = uwb_dev->bce; + size_t result; + + mutex_lock(&bce->mutex); + result = stats_show(&uwb_dev->bce->lqe_stats, buf); + mutex_unlock(&bce->mutex); + return result; +} + +static ssize_t uwb_dev_LQE_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_beca_e *bce = uwb_dev->bce; + ssize_t result; + + mutex_lock(&bce->mutex); + result = stats_store(&uwb_dev->bce->lqe_stats, buf, size); + mutex_unlock(&bce->mutex); + return result; +} +static DEVICE_ATTR(LQE, S_IRUGO | S_IWUSR, uwb_dev_LQE_show, uwb_dev_LQE_store); + +static ssize_t uwb_dev_RSSI_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_beca_e *bce = uwb_dev->bce; + size_t result; + + mutex_lock(&bce->mutex); + result = stats_show(&uwb_dev->bce->rssi_stats, buf); + mutex_unlock(&bce->mutex); + return result; +} + +static ssize_t uwb_dev_RSSI_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_beca_e *bce = uwb_dev->bce; + ssize_t result; + + mutex_lock(&bce->mutex); + result = stats_store(&uwb_dev->bce->rssi_stats, buf, size); + mutex_unlock(&bce->mutex); + return result; +} +static DEVICE_ATTR(RSSI, S_IRUGO | S_IWUSR, uwb_dev_RSSI_show, uwb_dev_RSSI_store); + + +static struct attribute *dev_attrs[] = { + &dev_attr_EUI_48.attr, + &dev_attr_DevAddr.attr, + &dev_attr_BPST.attr, + &dev_attr_IEs.attr, + &dev_attr_LQE.attr, + &dev_attr_RSSI.attr, + NULL, +}; + +static struct attribute_group dev_attr_group = { + .attrs = dev_attrs, +}; + +static struct attribute_group *groups[] = { + &dev_attr_group, + NULL, +}; + +/** + * Device SYSFS registration + * + * + */ +static int __uwb_dev_sys_add(struct uwb_dev *uwb_dev, struct device *parent_dev) +{ + int result; + struct device *dev; + + d_fnstart(4, NULL, "(uwb_dev %p parent_dev %p)\n", uwb_dev, parent_dev); + BUG_ON(parent_dev == NULL); + + dev = &uwb_dev->dev; + /* Device sysfs files are only useful for neighbor devices not + local radio controllers. */ + if (&uwb_dev->rc->uwb_dev != uwb_dev) + dev->groups = groups; + dev->parent = parent_dev; + dev_set_drvdata(dev, uwb_dev); + + result = device_add(dev); + d_fnend(4, NULL, "(uwb_dev %p parent_dev %p) = %d\n", uwb_dev, parent_dev, result); + return result; +} + + +static void __uwb_dev_sys_rm(struct uwb_dev *uwb_dev) +{ + d_fnstart(4, NULL, "(uwb_dev %p)\n", uwb_dev); + dev_set_drvdata(&uwb_dev->dev, NULL); + device_del(&uwb_dev->dev); + d_fnend(4, NULL, "(uwb_dev %p) = void\n", uwb_dev); +} + + +/** + * Register and initialize a new UWB device + * + * Did you call uwb_dev_init() on it? + * + * @parent_rc: is the parent radio controller who has the link to the + * device. When registering the UWB device that is a UWB + * Radio Controller, we point back to it. + * + * If registering the device that is part of a radio, caller has set + * rc->uwb_dev->dev. Otherwise it is to be left NULL--a new one will + * be allocated. + */ +int uwb_dev_add(struct uwb_dev *uwb_dev, struct device *parent_dev, + struct uwb_rc *parent_rc) +{ + int result; + struct device *dev; + + BUG_ON(uwb_dev == NULL); + BUG_ON(parent_dev == NULL); + BUG_ON(parent_rc == NULL); + + mutex_lock(&uwb_dev->mutex); + dev = &uwb_dev->dev; + uwb_dev->rc = parent_rc; + result = __uwb_dev_sys_add(uwb_dev, parent_dev); + if (result < 0) + printk(KERN_ERR "UWB: unable to register dev %s with sysfs: %d\n", + dev_name(dev), result); + mutex_unlock(&uwb_dev->mutex); + return result; +} + + +void uwb_dev_rm(struct uwb_dev *uwb_dev) +{ + mutex_lock(&uwb_dev->mutex); + __uwb_dev_sys_rm(uwb_dev); + mutex_unlock(&uwb_dev->mutex); +} + + +static +int __uwb_dev_try_get(struct device *dev, void *__target_uwb_dev) +{ + struct uwb_dev *target_uwb_dev = __target_uwb_dev; + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + if (uwb_dev == target_uwb_dev) { + uwb_dev_get(uwb_dev); + return 1; + } else + return 0; +} + + +/** + * Given a UWB device descriptor, validate and refcount it + * + * @returns NULL if the device does not exist or is quiescing; the ptr to + * it otherwise. + */ +struct uwb_dev *uwb_dev_try_get(struct uwb_rc *rc, struct uwb_dev *uwb_dev) +{ + if (uwb_dev_for_each(rc, __uwb_dev_try_get, uwb_dev)) + return uwb_dev; + else + return NULL; +} +EXPORT_SYMBOL_GPL(uwb_dev_try_get); + + +/** + * Remove a device from the system [grunt for other functions] + */ +int __uwb_dev_offair(struct uwb_dev *uwb_dev, struct uwb_rc *rc) +{ + struct device *dev = &uwb_dev->dev; + char macbuf[UWB_ADDR_STRSIZE], devbuf[UWB_ADDR_STRSIZE]; + + d_fnstart(3, NULL, "(dev %p [uwb_dev %p], uwb_rc %p)\n", dev, uwb_dev, rc); + uwb_mac_addr_print(macbuf, sizeof(macbuf), &uwb_dev->mac_addr); + uwb_dev_addr_print(devbuf, sizeof(devbuf), &uwb_dev->dev_addr); + dev_info(dev, "uwb device (mac %s dev %s) disconnected from %s %s\n", + macbuf, devbuf, + rc ? rc->uwb_dev.dev.parent->bus->name : "n/a", + rc ? dev_name(rc->uwb_dev.dev.parent) : ""); + uwb_dev_rm(uwb_dev); + uwb_dev_put(uwb_dev); /* for the creation in _onair() */ + d_fnend(3, NULL, "(dev %p [uwb_dev %p], uwb_rc %p) = 0\n", dev, uwb_dev, rc); + return 0; +} + + +/** + * A device went off the air, clean up after it! + * + * This is called by the UWB Daemon (through the beacon purge function + * uwb_bcn_cache_purge) when it is detected that a device has been in + * radio silence for a while. + * + * If this device is actually a local radio controller we don't need + * to go through the offair process, as it is not registered as that. + * + * NOTE: uwb_bcn_cache.mutex is held! + */ +void uwbd_dev_offair(struct uwb_beca_e *bce) +{ + struct uwb_dev *uwb_dev; + + uwb_dev = bce->uwb_dev; + if (uwb_dev) { + uwb_notify(uwb_dev->rc, uwb_dev, UWB_NOTIF_OFFAIR); + __uwb_dev_offair(uwb_dev, uwb_dev->rc); + } +} + + +/** + * A device went on the air, start it up! + * + * This is called by the UWB Daemon when it is detected that a device + * has popped up in the radio range of the radio controller. + * + * It will just create the freaking device, register the beacon and + * stuff and yatla, done. + * + * + * NOTE: uwb_beca.mutex is held, bce->mutex is held + */ +void uwbd_dev_onair(struct uwb_rc *rc, struct uwb_beca_e *bce) +{ + int result; + struct device *dev = &rc->uwb_dev.dev; + struct uwb_dev *uwb_dev; + char macbuf[UWB_ADDR_STRSIZE], devbuf[UWB_ADDR_STRSIZE]; + + uwb_mac_addr_print(macbuf, sizeof(macbuf), bce->mac_addr); + uwb_dev_addr_print(devbuf, sizeof(devbuf), &bce->dev_addr); + uwb_dev = kzalloc(sizeof(struct uwb_dev), GFP_KERNEL); + if (uwb_dev == NULL) { + dev_err(dev, "new device %s: Cannot allocate memory\n", + macbuf); + return; + } + uwb_dev_init(uwb_dev); /* This sets refcnt to one, we own it */ + uwb_dev->mac_addr = *bce->mac_addr; + uwb_dev->dev_addr = bce->dev_addr; + dev_set_name(&uwb_dev->dev, macbuf); + result = uwb_dev_add(uwb_dev, &rc->uwb_dev.dev, rc); + if (result < 0) { + dev_err(dev, "new device %s: cannot instantiate device\n", + macbuf); + goto error_dev_add; + } + /* plug the beacon cache */ + bce->uwb_dev = uwb_dev; + uwb_dev->bce = bce; + uwb_bce_get(bce); /* released in uwb_dev_sys_release() */ + dev_info(dev, "uwb device (mac %s dev %s) connected to %s %s\n", + macbuf, devbuf, rc->uwb_dev.dev.parent->bus->name, + dev_name(rc->uwb_dev.dev.parent)); + uwb_notify(rc, uwb_dev, UWB_NOTIF_ONAIR); + return; + +error_dev_add: + kfree(uwb_dev); + return; +} + +/** + * Iterate over the list of UWB devices, calling a @function on each + * + * See docs for bus_for_each().... + * + * @rc: radio controller for the devices. + * @function: function to call. + * @priv: data to pass to @function. + * @returns: 0 if no invocation of function() returned a value + * different to zero. That value otherwise. + */ +int uwb_dev_for_each(struct uwb_rc *rc, uwb_dev_for_each_f function, void *priv) +{ + return device_for_each_child(&rc->uwb_dev.dev, priv, function); +} +EXPORT_SYMBOL_GPL(uwb_dev_for_each); diff --git a/drivers/uwb/lc-rc.c b/drivers/uwb/lc-rc.c new file mode 100644 index 000000000000..ee5772f00d42 --- /dev/null +++ b/drivers/uwb/lc-rc.c @@ -0,0 +1,495 @@ +/* + * Ultra Wide Band + * Life cycle of radio controllers + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + * + * A UWB radio controller is also a UWB device, so it embeds one... + * + * List of RCs comes from the 'struct class uwb_rc_class'. + */ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/random.h> +#include <linux/kdev_t.h> +#include <linux/etherdevice.h> +#include <linux/usb.h> + +#define D_LOCAL 1 +#include <linux/uwb/debug.h> +#include "uwb-internal.h" + +static int uwb_rc_index_match(struct device *dev, void *data) +{ + int *index = data; + struct uwb_rc *rc = dev_get_drvdata(dev); + + if (rc->index == *index) + return 1; + return 0; +} + +static struct uwb_rc *uwb_rc_find_by_index(int index) +{ + struct device *dev; + struct uwb_rc *rc = NULL; + + dev = class_find_device(&uwb_rc_class, NULL, &index, uwb_rc_index_match); + if (dev) + rc = dev_get_drvdata(dev); + return rc; +} + +static int uwb_rc_new_index(void) +{ + int index = 0; + + for (;;) { + if (!uwb_rc_find_by_index(index)) + return index; + if (++index < 0) + index = 0; + } +} + +/** + * Release the backing device of a uwb_rc that has been dynamically allocated. + */ +static void uwb_rc_sys_release(struct device *dev) +{ + struct uwb_dev *uwb_dev = container_of(dev, struct uwb_dev, dev); + struct uwb_rc *rc = container_of(uwb_dev, struct uwb_rc, uwb_dev); + + uwb_rc_neh_destroy(rc); + uwb_rc_ie_release(rc); + d_printf(1, dev, "freed uwb_rc %p\n", rc); + kfree(rc); +} + + +void uwb_rc_init(struct uwb_rc *rc) +{ + struct uwb_dev *uwb_dev = &rc->uwb_dev; + + uwb_dev_init(uwb_dev); + rc->uwb_dev.dev.class = &uwb_rc_class; + rc->uwb_dev.dev.release = uwb_rc_sys_release; + uwb_rc_neh_create(rc); + rc->beaconing = -1; + rc->scan_type = UWB_SCAN_DISABLED; + INIT_LIST_HEAD(&rc->notifs_chain.list); + mutex_init(&rc->notifs_chain.mutex); + uwb_drp_avail_init(rc); + uwb_rc_ie_init(rc); + uwb_rsv_init(rc); + uwb_rc_pal_init(rc); +} +EXPORT_SYMBOL_GPL(uwb_rc_init); + + +struct uwb_rc *uwb_rc_alloc(void) +{ + struct uwb_rc *rc; + rc = kzalloc(sizeof(*rc), GFP_KERNEL); + if (rc == NULL) + return NULL; + uwb_rc_init(rc); + return rc; +} +EXPORT_SYMBOL_GPL(uwb_rc_alloc); + +static struct attribute *rc_attrs[] = { + &dev_attr_mac_address.attr, + &dev_attr_scan.attr, + &dev_attr_beacon.attr, + NULL, +}; + +static struct attribute_group rc_attr_group = { + .attrs = rc_attrs, +}; + +/* + * Registration of sysfs specific stuff + */ +static int uwb_rc_sys_add(struct uwb_rc *rc) +{ + return sysfs_create_group(&rc->uwb_dev.dev.kobj, &rc_attr_group); +} + + +static void __uwb_rc_sys_rm(struct uwb_rc *rc) +{ + sysfs_remove_group(&rc->uwb_dev.dev.kobj, &rc_attr_group); +} + +/** + * uwb_rc_mac_addr_setup - get an RC's EUI-48 address or set it + * @rc: the radio controller. + * + * If the EUI-48 address is 00:00:00:00:00:00 or FF:FF:FF:FF:FF:FF + * then a random locally administered EUI-48 is generated and set on + * the device. The probability of address collisions is sufficiently + * unlikely (1/2^40 = 9.1e-13) that they're not checked for. + */ +static +int uwb_rc_mac_addr_setup(struct uwb_rc *rc) +{ + int result; + struct device *dev = &rc->uwb_dev.dev; + struct uwb_dev *uwb_dev = &rc->uwb_dev; + char devname[UWB_ADDR_STRSIZE]; + struct uwb_mac_addr addr; + + result = uwb_rc_mac_addr_get(rc, &addr); + if (result < 0) { + dev_err(dev, "cannot retrieve UWB EUI-48 address: %d\n", result); + return result; + } + + if (uwb_mac_addr_unset(&addr) || uwb_mac_addr_bcast(&addr)) { + addr.data[0] = 0x02; /* locally adminstered and unicast */ + get_random_bytes(&addr.data[1], sizeof(addr.data)-1); + + result = uwb_rc_mac_addr_set(rc, &addr); + if (result < 0) { + uwb_mac_addr_print(devname, sizeof(devname), &addr); + dev_err(dev, "cannot set EUI-48 address %s: %d\n", + devname, result); + return result; + } + } + uwb_dev->mac_addr = addr; + return 0; +} + + + +static int uwb_rc_setup(struct uwb_rc *rc) +{ + int result; + struct device *dev = &rc->uwb_dev.dev; + + result = uwb_rc_reset(rc); + if (result < 0) { + dev_err(dev, "cannot reset UWB radio: %d\n", result); + goto error; + } + result = uwb_rc_mac_addr_setup(rc); + if (result < 0) { + dev_err(dev, "cannot setup UWB MAC address: %d\n", result); + goto error; + } + result = uwb_rc_dev_addr_assign(rc); + if (result < 0) { + dev_err(dev, "cannot assign UWB DevAddr: %d\n", result); + goto error; + } + result = uwb_rc_ie_setup(rc); + if (result < 0) { + dev_err(dev, "cannot setup IE subsystem: %d\n", result); + goto error_ie_setup; + } + result = uwb_rsv_setup(rc); + if (result < 0) { + dev_err(dev, "cannot setup reservation subsystem: %d\n", result); + goto error_rsv_setup; + } + uwb_dbg_add_rc(rc); + return 0; + +error_rsv_setup: + uwb_rc_ie_release(rc); +error_ie_setup: +error: + return result; +} + + +/** + * Register a new UWB radio controller + * + * Did you call uwb_rc_init() on your rc? + * + * We assume that this is being called with a > 0 refcount on + * it [through ops->{get|put}_device(). We'll take our own, though. + * + * @parent_dev is our real device, the one that provides the actual UWB device + */ +int uwb_rc_add(struct uwb_rc *rc, struct device *parent_dev, void *priv) +{ + int result; + struct device *dev; + char macbuf[UWB_ADDR_STRSIZE], devbuf[UWB_ADDR_STRSIZE]; + + rc->index = uwb_rc_new_index(); + + dev = &rc->uwb_dev.dev; + dev_set_name(dev, "uwb%d", rc->index); + + rc->priv = priv; + + result = rc->start(rc); + if (result < 0) + goto error_rc_start; + + result = uwb_rc_setup(rc); + if (result < 0) { + dev_err(dev, "cannot setup UWB radio controller: %d\n", result); + goto error_rc_setup; + } + + result = uwb_dev_add(&rc->uwb_dev, parent_dev, rc); + if (result < 0 && result != -EADDRNOTAVAIL) + goto error_dev_add; + + result = uwb_rc_sys_add(rc); + if (result < 0) { + dev_err(parent_dev, "cannot register UWB radio controller " + "dev attributes: %d\n", result); + goto error_sys_add; + } + + uwb_mac_addr_print(macbuf, sizeof(macbuf), &rc->uwb_dev.mac_addr); + uwb_dev_addr_print(devbuf, sizeof(devbuf), &rc->uwb_dev.dev_addr); + dev_info(dev, + "new uwb radio controller (mac %s dev %s) on %s %s\n", + macbuf, devbuf, parent_dev->bus->name, dev_name(parent_dev)); + rc->ready = 1; + return 0; + +error_sys_add: + uwb_dev_rm(&rc->uwb_dev); +error_dev_add: +error_rc_setup: + rc->stop(rc); + uwbd_flush(rc); +error_rc_start: + return result; +} +EXPORT_SYMBOL_GPL(uwb_rc_add); + + +static int uwb_dev_offair_helper(struct device *dev, void *priv) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + + return __uwb_dev_offair(uwb_dev, uwb_dev->rc); +} + +/* + * Remove a Radio Controller; stop beaconing/scanning, disconnect all children + */ +void uwb_rc_rm(struct uwb_rc *rc) +{ + rc->ready = 0; + + uwb_dbg_del_rc(rc); + uwb_rsv_cleanup(rc); + uwb_rc_ie_rm(rc, UWB_IDENTIFICATION_IE); + if (rc->beaconing >= 0) + uwb_rc_beacon(rc, -1, 0); + if (rc->scan_type != UWB_SCAN_DISABLED) + uwb_rc_scan(rc, rc->scanning, UWB_SCAN_DISABLED, 0); + uwb_rc_reset(rc); + + rc->stop(rc); + uwbd_flush(rc); + + uwb_dev_lock(&rc->uwb_dev); + rc->priv = NULL; + rc->cmd = NULL; + uwb_dev_unlock(&rc->uwb_dev); + mutex_lock(&uwb_beca.mutex); + uwb_dev_for_each(rc, uwb_dev_offair_helper, NULL); + __uwb_rc_sys_rm(rc); + mutex_unlock(&uwb_beca.mutex); + uwb_dev_rm(&rc->uwb_dev); +} +EXPORT_SYMBOL_GPL(uwb_rc_rm); + +static int find_rc_try_get(struct device *dev, void *data) +{ + struct uwb_rc *target_rc = data; + struct uwb_rc *rc = dev_get_drvdata(dev); + + if (rc == NULL) { + WARN_ON(1); + return 0; + } + if (rc == target_rc) { + if (rc->ready == 0) + return 0; + else + return 1; + } + return 0; +} + +/** + * Given a radio controller descriptor, validate and refcount it + * + * @returns NULL if the rc does not exist or is quiescing; the ptr to + * it otherwise. + */ +struct uwb_rc *__uwb_rc_try_get(struct uwb_rc *target_rc) +{ + struct device *dev; + struct uwb_rc *rc = NULL; + + dev = class_find_device(&uwb_rc_class, NULL, target_rc, + find_rc_try_get); + if (dev) { + rc = dev_get_drvdata(dev); + __uwb_rc_get(rc); + } + return rc; +} +EXPORT_SYMBOL_GPL(__uwb_rc_try_get); + +/* + * RC get for external refcount acquirers... + * + * Increments the refcount of the device and it's backend modules + */ +static inline struct uwb_rc *uwb_rc_get(struct uwb_rc *rc) +{ + if (rc->ready == 0) + return NULL; + uwb_dev_get(&rc->uwb_dev); + return rc; +} + +static int find_rc_grandpa(struct device *dev, void *data) +{ + struct device *grandpa_dev = data; + struct uwb_rc *rc = dev_get_drvdata(dev); + + if (rc->uwb_dev.dev.parent->parent == grandpa_dev) { + rc = uwb_rc_get(rc); + return 1; + } + return 0; +} + +/** + * Locate and refcount a radio controller given a common grand-parent + * + * @grandpa_dev Pointer to the 'grandparent' device structure. + * @returns NULL If the rc does not exist or is quiescing; the ptr to + * it otherwise, properly referenced. + * + * The Radio Control interface (or the UWB Radio Controller) is always + * an interface of a device. The parent is the interface, the + * grandparent is the device that encapsulates the interface. + * + * There is no need to lock around as the "grandpa" would be + * refcounted by the target, and to remove the referemes, the + * uwb_rc_class->sem would have to be taken--we hold it, ergo we + * should be safe. + */ +struct uwb_rc *uwb_rc_get_by_grandpa(const struct device *grandpa_dev) +{ + struct device *dev; + struct uwb_rc *rc = NULL; + + dev = class_find_device(&uwb_rc_class, NULL, (void *)grandpa_dev, + find_rc_grandpa); + if (dev) + rc = dev_get_drvdata(dev); + return rc; +} +EXPORT_SYMBOL_GPL(uwb_rc_get_by_grandpa); + +/** + * Find a radio controller by device address + * + * @returns the pointer to the radio controller, properly referenced + */ +static int find_rc_dev(struct device *dev, void *data) +{ + struct uwb_dev_addr *addr = data; + struct uwb_rc *rc = dev_get_drvdata(dev); + + if (rc == NULL) { + WARN_ON(1); + return 0; + } + if (!uwb_dev_addr_cmp(&rc->uwb_dev.dev_addr, addr)) { + rc = uwb_rc_get(rc); + return 1; + } + return 0; +} + +struct uwb_rc *uwb_rc_get_by_dev(const struct uwb_dev_addr *addr) +{ + struct device *dev; + struct uwb_rc *rc = NULL; + + dev = class_find_device(&uwb_rc_class, NULL, (void *)addr, + find_rc_dev); + if (dev) + rc = dev_get_drvdata(dev); + + return rc; +} +EXPORT_SYMBOL_GPL(uwb_rc_get_by_dev); + +/** + * Drop a reference on a radio controller + * + * This is the version that should be done by entities external to the + * UWB Radio Control stack (ie: clients of the API). + */ +void uwb_rc_put(struct uwb_rc *rc) +{ + __uwb_rc_put(rc); +} +EXPORT_SYMBOL_GPL(uwb_rc_put); + +/* + * + * + */ +ssize_t uwb_rc_print_IEs(struct uwb_rc *uwb_rc, char *buf, size_t size) +{ + ssize_t result; + struct uwb_rc_evt_get_ie *ie_info; + struct uwb_buf_ctx ctx; + + result = uwb_rc_get_ie(uwb_rc, &ie_info); + if (result < 0) + goto error_get_ie; + ctx.buf = buf; + ctx.size = size; + ctx.bytes = 0; + uwb_ie_for_each(&uwb_rc->uwb_dev, uwb_ie_dump_hex, &ctx, + ie_info->IEData, result - sizeof(*ie_info)); + result = ctx.bytes; + kfree(ie_info); +error_get_ie: + return result; +} + diff --git a/drivers/uwb/neh.c b/drivers/uwb/neh.c new file mode 100644 index 000000000000..9b4eb64327ac --- /dev/null +++ b/drivers/uwb/neh.c @@ -0,0 +1,616 @@ +/* + * WUSB Wire Adapter: Radio Control Interface (WUSB[8]) + * Notification and Event Handling + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * The RC interface of the Host Wire Adapter (USB dongle) or WHCI PCI + * card delivers a stream of notifications and events to the + * notification end event endpoint or area. This code takes care of + * getting a buffer with that data, breaking it up in separate + * notifications and events and then deliver those. + * + * Events are answers to commands and they carry a context ID that + * associates them to the command. Notifications are that, + * notifications, they come out of the blue and have a context ID of + * zero. Think of the context ID kind of like a handler. The + * uwb_rc_neh_* code deals with managing context IDs. + * + * This is why you require a handle to operate on a UWB host. When you + * open a handle a context ID is assigned to you. + * + * So, as it is done is: + * + * 1. Add an event handler [uwb_rc_neh_add()] (assigns a ctx id) + * 2. Issue command [rc->cmd(rc, ...)] + * 3. Arm the timeout timer [uwb_rc_neh_arm()] + * 4, Release the reference to the neh [uwb_rc_neh_put()] + * 5. Wait for the callback + * 6. Command result (RCEB) is passed to the callback + * + * If (2) fails, you should remove the handle [uwb_rc_neh_rm()] + * instead of arming the timer. + * + * Handles are for using in *serialized* code, single thread. + * + * When the notification/event comes, the IRQ handler/endpoint + * callback passes the data read to uwb_rc_neh_grok() which will break + * it up in a discrete series of events, look up who is listening for + * them and execute the pertinent callbacks. + * + * If the reader detects an error while reading the data stream, call + * uwb_rc_neh_error(). + * + * CONSTRAINTS/ASSUMPTIONS: + * + * - Most notifications/events are small (less thank .5k), copying + * around is ok. + * + * - Notifications/events are ALWAYS smaller than PAGE_SIZE + * + * - Notifications/events always come in a single piece (ie: a buffer + * will always contain entire notifications/events). + * + * - we cannot know in advance how long each event is (because they + * lack a length field in their header--smart move by the standards + * body, btw). So we need a facility to get the event size given the + * header. This is what the EST code does (notif/Event Size + * Tables), check nest.c--as well, you can associate the size to + * the handle [w/ neh->extra_size()]. + * + * - Most notifications/events are fixed size; only a few are variable + * size (NEST takes care of that). + * + * - Listeners of events expect them, so they usually provide a + * buffer, as they know the size. Listeners to notifications don't, + * so we allocate their buffers dynamically. + */ +#include <linux/kernel.h> +#include <linux/timer.h> +#include <linux/err.h> + +#include "uwb-internal.h" +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +/* + * UWB Radio Controller Notification/Event Handle + * + * Represents an entity waiting for an event coming from the UWB Radio + * Controller with a given context id (context) and type (evt_type and + * evt). On reception of the notification/event, the callback (cb) is + * called with the event. + * + * If the timer expires before the event is received, the callback is + * called with -ETIMEDOUT as the event size. + */ +struct uwb_rc_neh { + struct kref kref; + + struct uwb_rc *rc; + u8 evt_type; + __le16 evt; + u8 context; + uwb_rc_cmd_cb_f cb; + void *arg; + + struct timer_list timer; + struct list_head list_node; +}; + +static void uwb_rc_neh_timer(unsigned long arg); + +static void uwb_rc_neh_release(struct kref *kref) +{ + struct uwb_rc_neh *neh = container_of(kref, struct uwb_rc_neh, kref); + + kfree(neh); +} + +static void uwb_rc_neh_get(struct uwb_rc_neh *neh) +{ + kref_get(&neh->kref); +} + +/** + * uwb_rc_neh_put - release reference to a neh + * @neh: the neh + */ +void uwb_rc_neh_put(struct uwb_rc_neh *neh) +{ + kref_put(&neh->kref, uwb_rc_neh_release); +} + + +/** + * Assigns @neh a context id from @rc's pool + * + * @rc: UWB Radio Controller descriptor; @rc->neh_lock taken + * @neh: Notification/Event Handle + * @returns 0 if context id was assigned ok; < 0 errno on error (if + * all the context IDs are taken). + * + * (assumes @wa is locked). + * + * NOTE: WUSB spec reserves context ids 0x00 for notifications and + * 0xff is invalid, so they must not be used. Initialization + * fills up those two in the bitmap so they are not allocated. + * + * We spread the allocation around to reduce the posiblity of two + * consecutive opened @neh's getting the same context ID assigned (to + * avoid surprises with late events that timed out long time ago). So + * first we search from where @rc->ctx_roll is, if not found, we + * search from zero. + */ +static +int __uwb_rc_ctx_get(struct uwb_rc *rc, struct uwb_rc_neh *neh) +{ + int result; + result = find_next_zero_bit(rc->ctx_bm, UWB_RC_CTX_MAX, + rc->ctx_roll++); + if (result < UWB_RC_CTX_MAX) + goto found; + result = find_first_zero_bit(rc->ctx_bm, UWB_RC_CTX_MAX); + if (result < UWB_RC_CTX_MAX) + goto found; + return -ENFILE; +found: + set_bit(result, rc->ctx_bm); + neh->context = result; + return 0; +} + + +/** Releases @neh's context ID back to @rc (@rc->neh_lock is locked). */ +static +void __uwb_rc_ctx_put(struct uwb_rc *rc, struct uwb_rc_neh *neh) +{ + struct device *dev = &rc->uwb_dev.dev; + if (neh->context == 0) + return; + if (test_bit(neh->context, rc->ctx_bm) == 0) { + dev_err(dev, "context %u not set in bitmap\n", + neh->context); + WARN_ON(1); + } + clear_bit(neh->context, rc->ctx_bm); + neh->context = 0; +} + +/** + * uwb_rc_neh_add - add a neh for a radio controller command + * @rc: the radio controller + * @cmd: the radio controller command + * @expected_type: the type of the expected response event + * @expected_event: the expected event ID + * @cb: callback for when the event is received + * @arg: argument for the callback + * + * Creates a neh and adds it to the list of those waiting for an + * event. A context ID will be assigned to the command. + */ +struct uwb_rc_neh *uwb_rc_neh_add(struct uwb_rc *rc, struct uwb_rccb *cmd, + u8 expected_type, u16 expected_event, + uwb_rc_cmd_cb_f cb, void *arg) +{ + int result; + unsigned long flags; + struct device *dev = &rc->uwb_dev.dev; + struct uwb_rc_neh *neh; + + neh = kzalloc(sizeof(*neh), GFP_KERNEL); + if (neh == NULL) { + result = -ENOMEM; + goto error_kzalloc; + } + + kref_init(&neh->kref); + INIT_LIST_HEAD(&neh->list_node); + init_timer(&neh->timer); + neh->timer.function = uwb_rc_neh_timer; + neh->timer.data = (unsigned long)neh; + + neh->rc = rc; + neh->evt_type = expected_type; + neh->evt = cpu_to_le16(expected_event); + neh->cb = cb; + neh->arg = arg; + + spin_lock_irqsave(&rc->neh_lock, flags); + result = __uwb_rc_ctx_get(rc, neh); + if (result >= 0) { + cmd->bCommandContext = neh->context; + list_add_tail(&neh->list_node, &rc->neh_list); + uwb_rc_neh_get(neh); + } + spin_unlock_irqrestore(&rc->neh_lock, flags); + if (result < 0) + goto error_ctx_get; + + return neh; + +error_ctx_get: + kfree(neh); +error_kzalloc: + dev_err(dev, "cannot open handle to radio controller: %d\n", result); + return ERR_PTR(result); +} + +static void __uwb_rc_neh_rm(struct uwb_rc *rc, struct uwb_rc_neh *neh) +{ + del_timer(&neh->timer); + __uwb_rc_ctx_put(rc, neh); + list_del(&neh->list_node); +} + +/** + * uwb_rc_neh_rm - remove a neh. + * @rc: the radio controller + * @neh: the neh to remove + * + * Remove an active neh immediately instead of waiting for the event + * (or a time out). + */ +void uwb_rc_neh_rm(struct uwb_rc *rc, struct uwb_rc_neh *neh) +{ + unsigned long flags; + + spin_lock_irqsave(&rc->neh_lock, flags); + __uwb_rc_neh_rm(rc, neh); + spin_unlock_irqrestore(&rc->neh_lock, flags); + + uwb_rc_neh_put(neh); +} + +/** + * uwb_rc_neh_arm - arm an event handler timeout timer + * + * @rc: UWB Radio Controller + * @neh: Notification/event handler for @rc + * + * The timer is only armed if the neh is active. + */ +void uwb_rc_neh_arm(struct uwb_rc *rc, struct uwb_rc_neh *neh) +{ + unsigned long flags; + + spin_lock_irqsave(&rc->neh_lock, flags); + if (neh->context) + mod_timer(&neh->timer, + jiffies + msecs_to_jiffies(UWB_RC_CMD_TIMEOUT_MS)); + spin_unlock_irqrestore(&rc->neh_lock, flags); +} + +static void uwb_rc_neh_cb(struct uwb_rc_neh *neh, struct uwb_rceb *rceb, size_t size) +{ + (*neh->cb)(neh->rc, neh->arg, rceb, size); + uwb_rc_neh_put(neh); +} + +static bool uwb_rc_neh_match(struct uwb_rc_neh *neh, const struct uwb_rceb *rceb) +{ + return neh->evt_type == rceb->bEventType + && neh->evt == rceb->wEvent + && neh->context == rceb->bEventContext; +} + +/** + * Find the handle waiting for a RC Radio Control Event + * + * @rc: UWB Radio Controller + * @rceb: Pointer to the RCEB buffer + * @event_size: Pointer to the size of the RCEB buffer. Might be + * adjusted to take into account the @neh->extra_size + * settings. + * + * If the listener has no buffer (NULL buffer), one is allocated for + * the right size (the amount of data received). @neh->ptr will point + * to the event payload, which always starts with a 'struct + * uwb_rceb'. kfree() it when done. + */ +static +struct uwb_rc_neh *uwb_rc_neh_lookup(struct uwb_rc *rc, + const struct uwb_rceb *rceb) +{ + struct uwb_rc_neh *neh = NULL, *h; + unsigned long flags; + + spin_lock_irqsave(&rc->neh_lock, flags); + + list_for_each_entry(h, &rc->neh_list, list_node) { + if (uwb_rc_neh_match(h, rceb)) { + neh = h; + break; + } + } + + if (neh) + __uwb_rc_neh_rm(rc, neh); + + spin_unlock_irqrestore(&rc->neh_lock, flags); + + return neh; +} + + +/** + * Process notifications coming from the radio control interface + * + * @rc: UWB Radio Control Interface descriptor + * @neh: Notification/Event Handler @neh->ptr points to + * @uwb_evt->buffer. + * + * This function is called by the event/notif handling subsystem when + * notifications arrive (hwarc_probe() arms a notification/event handle + * that calls back this function for every received notification; this + * function then will rearm itself). + * + * Notification data buffers are dynamically allocated by the NEH + * handling code in neh.c [uwb_rc_neh_lookup()]. What is actually + * allocated is space to contain the notification data. + * + * Buffers are prefixed with a Radio Control Event Block (RCEB) as + * defined by the WUSB Wired-Adapter Radio Control interface. We + * just use it for the notification code. + * + * On each case statement we just transcode endianess of the different + * fields. We declare a pointer to a RCI definition of an event, and + * then to a UWB definition of the same event (which are the same, + * remember). Event if we use different pointers + */ +static +void uwb_rc_notif(struct uwb_rc *rc, struct uwb_rceb *rceb, ssize_t size) +{ + struct device *dev = &rc->uwb_dev.dev; + struct uwb_event *uwb_evt; + + if (size == -ESHUTDOWN) + return; + if (size < 0) { + dev_err(dev, "ignoring event with error code %zu\n", + size); + return; + } + + uwb_evt = kzalloc(sizeof(*uwb_evt), GFP_ATOMIC); + if (unlikely(uwb_evt == NULL)) { + dev_err(dev, "no memory to queue event 0x%02x/%04x/%02x\n", + rceb->bEventType, le16_to_cpu(rceb->wEvent), + rceb->bEventContext); + return; + } + uwb_evt->rc = __uwb_rc_get(rc); /* will be put by uwbd's uwbd_event_handle() */ + uwb_evt->ts_jiffies = jiffies; + uwb_evt->type = UWB_EVT_TYPE_NOTIF; + uwb_evt->notif.size = size; + uwb_evt->notif.rceb = rceb; + + switch (le16_to_cpu(rceb->wEvent)) { + /* Trap some vendor specific events + * + * FIXME: move this to handling in ptc-est, where we + * register a NULL event handler for these two guys + * using the Intel IDs. + */ + case 0x0103: + dev_info(dev, "FIXME: DEVICE ADD\n"); + return; + case 0x0104: + dev_info(dev, "FIXME: DEVICE RM\n"); + return; + default: + break; + } + + uwbd_event_queue(uwb_evt); +} + +static void uwb_rc_neh_grok_event(struct uwb_rc *rc, struct uwb_rceb *rceb, size_t size) +{ + struct device *dev = &rc->uwb_dev.dev; + struct uwb_rc_neh *neh; + struct uwb_rceb *notif; + + if (rceb->bEventContext == 0) { + notif = kmalloc(size, GFP_ATOMIC); + if (notif) { + memcpy(notif, rceb, size); + uwb_rc_notif(rc, notif, size); + } else + dev_err(dev, "event 0x%02x/%04x/%02x (%zu bytes): no memory\n", + rceb->bEventType, le16_to_cpu(rceb->wEvent), + rceb->bEventContext, size); + } else { + neh = uwb_rc_neh_lookup(rc, rceb); + if (neh) + uwb_rc_neh_cb(neh, rceb, size); + else + dev_warn(dev, "event 0x%02x/%04x/%02x (%zu bytes): nobody cared\n", + rceb->bEventType, le16_to_cpu(rceb->wEvent), + rceb->bEventContext, size); + } +} + +/** + * Given a buffer with one or more UWB RC events/notifications, break + * them up and dispatch them. + * + * @rc: UWB Radio Controller + * @buf: Buffer with the stream of notifications/events + * @buf_size: Amount of data in the buffer + * + * Note each notification/event starts always with a 'struct + * uwb_rceb', so the minimum size if 4 bytes. + * + * The device may pass us events formatted differently than expected. + * These are first filtered, potentially creating a new event in a new + * memory location. If a new event is created by the filter it is also + * freed here. + * + * For each notif/event, tries to guess the size looking at the EST + * tables, then looks for a neh that is waiting for that event and if + * found, copies the payload to the neh's buffer and calls it back. If + * not, the data is ignored. + * + * Note that if we can't find a size description in the EST tables, we + * still might find a size in the 'neh' handle in uwb_rc_neh_lookup(). + * + * Assumptions: + * + * @rc->neh_lock is NOT taken + * + * We keep track of various sizes here: + * size: contains the size of the buffer that is processed for the + * incoming event. this buffer may contain events that are not + * formatted as WHCI. + * real_size: the actual space taken by this event in the buffer. + * We need to keep track of the real size of an event to be able to + * advance the buffer correctly. + * event_size: the size of the event as expected by the core layer + * [OR] the size of the event after filtering. if the filtering + * created a new event in a new memory location then this is + * effectively the size of a new event buffer + */ +void uwb_rc_neh_grok(struct uwb_rc *rc, void *buf, size_t buf_size) +{ + struct device *dev = &rc->uwb_dev.dev; + void *itr; + struct uwb_rceb *rceb; + size_t size, real_size, event_size; + int needtofree; + + d_fnstart(3, dev, "(rc %p buf %p %zu buf_size)\n", rc, buf, buf_size); + d_printf(2, dev, "groking event block: %zu bytes\n", buf_size); + itr = buf; + size = buf_size; + while (size > 0) { + if (size < sizeof(*rceb)) { + dev_err(dev, "not enough data in event buffer to " + "process incoming events (%zu left, minimum is " + "%zu)\n", size, sizeof(*rceb)); + break; + } + + rceb = itr; + if (rc->filter_event) { + needtofree = rc->filter_event(rc, &rceb, size, + &real_size, &event_size); + if (needtofree < 0 && needtofree != -ENOANO) { + dev_err(dev, "BUG: Unable to filter event " + "(0x%02x/%04x/%02x) from " + "device. \n", rceb->bEventType, + le16_to_cpu(rceb->wEvent), + rceb->bEventContext); + break; + } + } else + needtofree = -ENOANO; + /* do real processing if there was no filtering or the + * filtering didn't act */ + if (needtofree == -ENOANO) { + ssize_t ret = uwb_est_find_size(rc, rceb, size); + if (ret < 0) + break; + if (ret > size) { + dev_err(dev, "BUG: hw sent incomplete event " + "0x%02x/%04x/%02x (%zd bytes), only got " + "%zu bytes. We don't handle that.\n", + rceb->bEventType, le16_to_cpu(rceb->wEvent), + rceb->bEventContext, ret, size); + break; + } + real_size = event_size = ret; + } + uwb_rc_neh_grok_event(rc, rceb, event_size); + + if (needtofree == 1) + kfree(rceb); + + itr += real_size; + size -= real_size; + d_printf(2, dev, "consumed %zd bytes, %zu left\n", + event_size, size); + } + d_fnend(3, dev, "(rc %p buf %p %zu buf_size) = void\n", rc, buf, buf_size); +} +EXPORT_SYMBOL_GPL(uwb_rc_neh_grok); + + +/** + * The entity that reads from the device notification/event channel has + * detected an error. + * + * @rc: UWB Radio Controller + * @error: Errno error code + * + */ +void uwb_rc_neh_error(struct uwb_rc *rc, int error) +{ + struct uwb_rc_neh *neh, *next; + unsigned long flags; + + BUG_ON(error >= 0); + spin_lock_irqsave(&rc->neh_lock, flags); + list_for_each_entry_safe(neh, next, &rc->neh_list, list_node) { + __uwb_rc_neh_rm(rc, neh); + uwb_rc_neh_cb(neh, NULL, error); + } + spin_unlock_irqrestore(&rc->neh_lock, flags); +} +EXPORT_SYMBOL_GPL(uwb_rc_neh_error); + + +static void uwb_rc_neh_timer(unsigned long arg) +{ + struct uwb_rc_neh *neh = (struct uwb_rc_neh *)arg; + struct uwb_rc *rc = neh->rc; + unsigned long flags; + + spin_lock_irqsave(&rc->neh_lock, flags); + __uwb_rc_neh_rm(rc, neh); + spin_unlock_irqrestore(&rc->neh_lock, flags); + + uwb_rc_neh_cb(neh, NULL, -ETIMEDOUT); +} + +/** Initializes the @rc's neh subsystem + */ +void uwb_rc_neh_create(struct uwb_rc *rc) +{ + spin_lock_init(&rc->neh_lock); + INIT_LIST_HEAD(&rc->neh_list); + set_bit(0, rc->ctx_bm); /* 0 is reserved (see [WUSB] table 8-65) */ + set_bit(0xff, rc->ctx_bm); /* and 0xff is invalid */ + rc->ctx_roll = 1; +} + + +/** Release's the @rc's neh subsystem */ +void uwb_rc_neh_destroy(struct uwb_rc *rc) +{ + unsigned long flags; + struct uwb_rc_neh *neh, *next; + + spin_lock_irqsave(&rc->neh_lock, flags); + list_for_each_entry_safe(neh, next, &rc->neh_list, list_node) { + __uwb_rc_neh_rm(rc, neh); + uwb_rc_neh_put(neh); + } + spin_unlock_irqrestore(&rc->neh_lock, flags); +} diff --git a/drivers/uwb/pal.c b/drivers/uwb/pal.c new file mode 100644 index 000000000000..1afb38eacb9a --- /dev/null +++ b/drivers/uwb/pal.c @@ -0,0 +1,91 @@ +/* + * UWB PAL support. + * + * Copyright (C) 2008 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/kernel.h> +#include <linux/uwb.h> + +#include "uwb-internal.h" + +/** + * uwb_pal_init - initialize a UWB PAL + * @pal: the PAL to initialize + */ +void uwb_pal_init(struct uwb_pal *pal) +{ + INIT_LIST_HEAD(&pal->node); +} +EXPORT_SYMBOL_GPL(uwb_pal_init); + +/** + * uwb_pal_register - register a UWB PAL + * @rc: the radio controller the PAL will be using + * @pal: the PAL + * + * The PAL must be initialized with uwb_pal_init(). + */ +int uwb_pal_register(struct uwb_rc *rc, struct uwb_pal *pal) +{ + int ret; + + if (pal->device) { + ret = sysfs_create_link(&pal->device->kobj, + &rc->uwb_dev.dev.kobj, "uwb_rc"); + if (ret < 0) + return ret; + ret = sysfs_create_link(&rc->uwb_dev.dev.kobj, + &pal->device->kobj, pal->name); + if (ret < 0) { + sysfs_remove_link(&pal->device->kobj, "uwb_rc"); + return ret; + } + } + + spin_lock(&rc->pal_lock); + list_add(&pal->node, &rc->pals); + spin_unlock(&rc->pal_lock); + + return 0; +} +EXPORT_SYMBOL_GPL(uwb_pal_register); + +/** + * uwb_pal_register - unregister a UWB PAL + * @rc: the radio controller the PAL was using + * @pal: the PAL + */ +void uwb_pal_unregister(struct uwb_rc *rc, struct uwb_pal *pal) +{ + spin_lock(&rc->pal_lock); + list_del(&pal->node); + spin_unlock(&rc->pal_lock); + + if (pal->device) { + sysfs_remove_link(&rc->uwb_dev.dev.kobj, pal->name); + sysfs_remove_link(&pal->device->kobj, "uwb_rc"); + } +} +EXPORT_SYMBOL_GPL(uwb_pal_unregister); + +/** + * uwb_rc_pal_init - initialize the PAL related parts of a radio controller + * @rc: the radio controller + */ +void uwb_rc_pal_init(struct uwb_rc *rc) +{ + spin_lock_init(&rc->pal_lock); + INIT_LIST_HEAD(&rc->pals); +} diff --git a/drivers/uwb/reset.c b/drivers/uwb/reset.c new file mode 100644 index 000000000000..8de856fa7958 --- /dev/null +++ b/drivers/uwb/reset.c @@ -0,0 +1,362 @@ +/* + * Ultra Wide Band + * UWB basic command support and radio reset + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: + * + * - docs + * + * - Now we are serializing (using the uwb_dev->mutex) the command + * execution; it should be parallelized as much as possible some + * day. + */ +#include <linux/kernel.h> +#include <linux/err.h> + +#include "uwb-internal.h" +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +/** + * Command result codes (WUSB1.0[T8-69]) + */ +static +const char *__strerror[] = { + "success", + "failure", + "hardware failure", + "no more slots", + "beacon is too large", + "invalid parameter", + "unsupported power level", + "time out (wa) or invalid ie data (whci)", + "beacon size exceeded", + "cancelled", + "invalid state", + "invalid size", + "ack not recieved", + "no more asie notification", +}; + + +/** Return a string matching the given error code */ +const char *uwb_rc_strerror(unsigned code) +{ + if (code == 255) + return "time out"; + if (code >= ARRAY_SIZE(__strerror)) + return "unknown error"; + return __strerror[code]; +} + +int uwb_rc_cmd_async(struct uwb_rc *rc, const char *cmd_name, + struct uwb_rccb *cmd, size_t cmd_size, + u8 expected_type, u16 expected_event, + uwb_rc_cmd_cb_f cb, void *arg) +{ + struct device *dev = &rc->uwb_dev.dev; + struct uwb_rc_neh *neh; + int needtofree = 0; + int result; + + uwb_dev_lock(&rc->uwb_dev); /* Protect against rc->priv being removed */ + if (rc->priv == NULL) { + uwb_dev_unlock(&rc->uwb_dev); + return -ESHUTDOWN; + } + + if (rc->filter_cmd) { + needtofree = rc->filter_cmd(rc, &cmd, &cmd_size); + if (needtofree < 0 && needtofree != -ENOANO) { + dev_err(dev, "%s: filter error: %d\n", + cmd_name, needtofree); + uwb_dev_unlock(&rc->uwb_dev); + return needtofree; + } + } + + neh = uwb_rc_neh_add(rc, cmd, expected_type, expected_event, cb, arg); + if (IS_ERR(neh)) { + result = PTR_ERR(neh); + goto out; + } + + result = rc->cmd(rc, cmd, cmd_size); + uwb_dev_unlock(&rc->uwb_dev); + if (result < 0) + uwb_rc_neh_rm(rc, neh); + else + uwb_rc_neh_arm(rc, neh); + uwb_rc_neh_put(neh); +out: + if (needtofree == 1) + kfree(cmd); + return result < 0 ? result : 0; +} +EXPORT_SYMBOL_GPL(uwb_rc_cmd_async); + +struct uwb_rc_cmd_done_params { + struct completion completion; + struct uwb_rceb *reply; + ssize_t reply_size; +}; + +static void uwb_rc_cmd_done(struct uwb_rc *rc, void *arg, + struct uwb_rceb *reply, ssize_t reply_size) +{ + struct uwb_rc_cmd_done_params *p = (struct uwb_rc_cmd_done_params *)arg; + + if (reply_size > 0) { + if (p->reply) + reply_size = min(p->reply_size, reply_size); + else + p->reply = kmalloc(reply_size, GFP_ATOMIC); + + if (p->reply) + memcpy(p->reply, reply, reply_size); + else + reply_size = -ENOMEM; + } + p->reply_size = reply_size; + complete(&p->completion); +} + + +/** + * Generic function for issuing commands to the Radio Control Interface + * + * @rc: UWB Radio Control descriptor + * @cmd_name: Name of the command being issued (for error messages) + * @cmd: Pointer to rccb structure containing the command; + * normally you embed this structure as the first member of + * the full command structure. + * @cmd_size: Size of the whole command buffer pointed to by @cmd. + * @reply: Pointer to where to store the reply + * @reply_size: @reply's size + * @expected_type: Expected type in the return event + * @expected_event: Expected event code in the return event + * @preply: Here a pointer to where the event data is received will + * be stored. Once done with the data, free with kfree(). + * + * This function is generic; it works for commands that return a fixed + * and known size or for commands that return a variable amount of data. + * + * If a buffer is provided, that is used, although it could be chopped + * to the maximum size of the buffer. If the buffer is NULL, then one + * be allocated in *preply with the whole contents of the reply. + * + * @rc needs to be referenced + */ +static +ssize_t __uwb_rc_cmd(struct uwb_rc *rc, const char *cmd_name, + struct uwb_rccb *cmd, size_t cmd_size, + struct uwb_rceb *reply, size_t reply_size, + u8 expected_type, u16 expected_event, + struct uwb_rceb **preply) +{ + ssize_t result = 0; + struct device *dev = &rc->uwb_dev.dev; + struct uwb_rc_cmd_done_params params; + + init_completion(¶ms.completion); + params.reply = reply; + params.reply_size = reply_size; + + result = uwb_rc_cmd_async(rc, cmd_name, cmd, cmd_size, + expected_type, expected_event, + uwb_rc_cmd_done, ¶ms); + if (result) + return result; + + wait_for_completion(¶ms.completion); + + if (preply) + *preply = params.reply; + + if (params.reply_size < 0) + dev_err(dev, "%s: confirmation event 0x%02x/%04x/%02x " + "reception failed: %d\n", cmd_name, + expected_type, expected_event, cmd->bCommandContext, + (int)params.reply_size); + return params.reply_size; +} + + +/** + * Generic function for issuing commands to the Radio Control Interface + * + * @rc: UWB Radio Control descriptor + * @cmd_name: Name of the command being issued (for error messages) + * @cmd: Pointer to rccb structure containing the command; + * normally you embed this structure as the first member of + * the full command structure. + * @cmd_size: Size of the whole command buffer pointed to by @cmd. + * @reply: Pointer to the beginning of the confirmation event + * buffer. Normally bigger than an 'struct hwarc_rceb'. + * You need to fill out reply->bEventType and reply->wEvent (in + * cpu order) as the function will use them to verify the + * confirmation event. + * @reply_size: Size of the reply buffer + * + * The function checks that the length returned in the reply is at + * least as big as @reply_size; if not, it will be deemed an error and + * -EIO returned. + * + * @rc needs to be referenced + */ +ssize_t uwb_rc_cmd(struct uwb_rc *rc, const char *cmd_name, + struct uwb_rccb *cmd, size_t cmd_size, + struct uwb_rceb *reply, size_t reply_size) +{ + struct device *dev = &rc->uwb_dev.dev; + ssize_t result; + + result = __uwb_rc_cmd(rc, cmd_name, + cmd, cmd_size, reply, reply_size, + reply->bEventType, reply->wEvent, NULL); + + if (result > 0 && result < reply_size) { + dev_err(dev, "%s: not enough data returned for decoding reply " + "(%zu bytes received vs at least %zu needed)\n", + cmd_name, result, reply_size); + result = -EIO; + } + return result; +} +EXPORT_SYMBOL_GPL(uwb_rc_cmd); + + +/** + * Generic function for issuing commands to the Radio Control + * Interface that return an unknown amount of data + * + * @rc: UWB Radio Control descriptor + * @cmd_name: Name of the command being issued (for error messages) + * @cmd: Pointer to rccb structure containing the command; + * normally you embed this structure as the first member of + * the full command structure. + * @cmd_size: Size of the whole command buffer pointed to by @cmd. + * @expected_type: Expected type in the return event + * @expected_event: Expected event code in the return event + * @preply: Here a pointer to where the event data is received will + * be stored. Once done with the data, free with kfree(). + * + * The function checks that the length returned in the reply is at + * least as big as a 'struct uwb_rceb *'; if not, it will be deemed an + * error and -EIO returned. + * + * @rc needs to be referenced + */ +ssize_t uwb_rc_vcmd(struct uwb_rc *rc, const char *cmd_name, + struct uwb_rccb *cmd, size_t cmd_size, + u8 expected_type, u16 expected_event, + struct uwb_rceb **preply) +{ + return __uwb_rc_cmd(rc, cmd_name, cmd, cmd_size, NULL, 0, + expected_type, expected_event, preply); +} +EXPORT_SYMBOL_GPL(uwb_rc_vcmd); + + +/** + * Reset a UWB Host Controller (and all radio settings) + * + * @rc: Host Controller descriptor + * @returns: 0 if ok, < 0 errno code on error + * + * We put the command on kmalloc'ed memory as some arches cannot do + * USB from the stack. The reply event is copied from an stage buffer, + * so it can be in the stack. See WUSB1.0[8.6.2.4] for more details. + */ +int uwb_rc_reset(struct uwb_rc *rc) +{ + int result = -ENOMEM; + struct uwb_rc_evt_confirm reply; + struct uwb_rccb *cmd; + size_t cmd_size = sizeof(*cmd); + + mutex_lock(&rc->uwb_dev.mutex); + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + goto error_kzalloc; + cmd->bCommandType = UWB_RC_CET_GENERAL; + cmd->wCommand = cpu_to_le16(UWB_RC_CMD_RESET); + reply.rceb.bEventType = UWB_RC_CET_GENERAL; + reply.rceb.wEvent = UWB_RC_CMD_RESET; + result = uwb_rc_cmd(rc, "RESET", cmd, cmd_size, + &reply.rceb, sizeof(reply)); + if (result < 0) + goto error_cmd; + if (reply.bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(&rc->uwb_dev.dev, + "RESET: command execution failed: %s (%d)\n", + uwb_rc_strerror(reply.bResultCode), reply.bResultCode); + result = -EIO; + } +error_cmd: + kfree(cmd); +error_kzalloc: + mutex_unlock(&rc->uwb_dev.mutex); + return result; +} + +int uwbd_msg_handle_reset(struct uwb_event *evt) +{ + struct uwb_rc *rc = evt->rc; + int ret; + + /* Need to prevent the RC hardware module going away while in + the rc->reset() call. */ + if (!try_module_get(rc->owner)) + return 0; + + dev_info(&rc->uwb_dev.dev, "resetting radio controller\n"); + ret = rc->reset(rc); + if (ret) + dev_err(&rc->uwb_dev.dev, "failed to reset hardware: %d\n", ret); + + module_put(rc->owner); + return ret; +} + +/** + * uwb_rc_reset_all - request a reset of the radio controller and PALs + * @rc: the radio controller of the hardware device to be reset. + * + * The full hardware reset of the radio controller and all the PALs + * will be scheduled. + */ +void uwb_rc_reset_all(struct uwb_rc *rc) +{ + struct uwb_event *evt; + + evt = kzalloc(sizeof(struct uwb_event), GFP_ATOMIC); + if (unlikely(evt == NULL)) + return; + + evt->rc = __uwb_rc_get(rc); /* will be put by uwbd's uwbd_event_handle() */ + evt->ts_jiffies = jiffies; + evt->type = UWB_EVT_TYPE_MSG; + evt->message = UWB_EVT_MSG_RESET; + + uwbd_event_queue(evt); +} +EXPORT_SYMBOL_GPL(uwb_rc_reset_all); diff --git a/drivers/uwb/rsv.c b/drivers/uwb/rsv.c new file mode 100644 index 000000000000..bae16204576d --- /dev/null +++ b/drivers/uwb/rsv.c @@ -0,0 +1,680 @@ +/* + * UWB reservation management. + * + * Copyright (C) 2008 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/uwb.h> + +#include "uwb-internal.h" + +static void uwb_rsv_timer(unsigned long arg); + +static const char *rsv_states[] = { + [UWB_RSV_STATE_NONE] = "none", + [UWB_RSV_STATE_O_INITIATED] = "initiated", + [UWB_RSV_STATE_O_PENDING] = "pending", + [UWB_RSV_STATE_O_MODIFIED] = "modified", + [UWB_RSV_STATE_O_ESTABLISHED] = "established", + [UWB_RSV_STATE_T_ACCEPTED] = "accepted", + [UWB_RSV_STATE_T_DENIED] = "denied", + [UWB_RSV_STATE_T_PENDING] = "pending", +}; + +static const char *rsv_types[] = { + [UWB_DRP_TYPE_ALIEN_BP] = "alien-bp", + [UWB_DRP_TYPE_HARD] = "hard", + [UWB_DRP_TYPE_SOFT] = "soft", + [UWB_DRP_TYPE_PRIVATE] = "private", + [UWB_DRP_TYPE_PCA] = "pca", +}; + +/** + * uwb_rsv_state_str - return a string for a reservation state + * @state: the reservation state. + */ +const char *uwb_rsv_state_str(enum uwb_rsv_state state) +{ + if (state < UWB_RSV_STATE_NONE || state >= UWB_RSV_STATE_LAST) + return "unknown"; + return rsv_states[state]; +} +EXPORT_SYMBOL_GPL(uwb_rsv_state_str); + +/** + * uwb_rsv_type_str - return a string for a reservation type + * @type: the reservation type + */ +const char *uwb_rsv_type_str(enum uwb_drp_type type) +{ + if (type < UWB_DRP_TYPE_ALIEN_BP || type > UWB_DRP_TYPE_PCA) + return "invalid"; + return rsv_types[type]; +} +EXPORT_SYMBOL_GPL(uwb_rsv_type_str); + +static void uwb_rsv_dump(struct uwb_rsv *rsv) +{ + struct device *dev = &rsv->rc->uwb_dev.dev; + struct uwb_dev_addr devaddr; + char owner[UWB_ADDR_STRSIZE], target[UWB_ADDR_STRSIZE]; + + uwb_dev_addr_print(owner, sizeof(owner), &rsv->owner->dev_addr); + if (rsv->target.type == UWB_RSV_TARGET_DEV) + devaddr = rsv->target.dev->dev_addr; + else + devaddr = rsv->target.devaddr; + uwb_dev_addr_print(target, sizeof(target), &devaddr); + + dev_dbg(dev, "rsv %s -> %s: %s\n", owner, target, uwb_rsv_state_str(rsv->state)); +} + +/* + * Get a free stream index for a reservation. + * + * If the target is a DevAddr (e.g., a WUSB cluster reservation) then + * the stream is allocated from a pool of per-RC stream indexes, + * otherwise a unique stream index for the target is selected. + */ +static int uwb_rsv_get_stream(struct uwb_rsv *rsv) +{ + struct uwb_rc *rc = rsv->rc; + unsigned long *streams_bm; + int stream; + + switch (rsv->target.type) { + case UWB_RSV_TARGET_DEV: + streams_bm = rsv->target.dev->streams; + break; + case UWB_RSV_TARGET_DEVADDR: + streams_bm = rc->uwb_dev.streams; + break; + default: + return -EINVAL; + } + + stream = find_first_zero_bit(streams_bm, UWB_NUM_STREAMS); + if (stream >= UWB_NUM_STREAMS) + return -EBUSY; + + rsv->stream = stream; + set_bit(stream, streams_bm); + + return 0; +} + +static void uwb_rsv_put_stream(struct uwb_rsv *rsv) +{ + struct uwb_rc *rc = rsv->rc; + unsigned long *streams_bm; + + switch (rsv->target.type) { + case UWB_RSV_TARGET_DEV: + streams_bm = rsv->target.dev->streams; + break; + case UWB_RSV_TARGET_DEVADDR: + streams_bm = rc->uwb_dev.streams; + break; + default: + return; + } + + clear_bit(rsv->stream, streams_bm); +} + +/* + * Generate a MAS allocation with a single row component. + */ +static void uwb_rsv_gen_alloc_row(struct uwb_mas_bm *mas, + int first_mas, int mas_per_zone, + int zs, int ze) +{ + struct uwb_mas_bm col; + int z; + + bitmap_zero(mas->bm, UWB_NUM_MAS); + bitmap_zero(col.bm, UWB_NUM_MAS); + bitmap_fill(col.bm, mas_per_zone); + bitmap_shift_left(col.bm, col.bm, first_mas + zs * UWB_MAS_PER_ZONE, UWB_NUM_MAS); + + for (z = zs; z <= ze; z++) { + bitmap_or(mas->bm, mas->bm, col.bm, UWB_NUM_MAS); + bitmap_shift_left(col.bm, col.bm, UWB_MAS_PER_ZONE, UWB_NUM_MAS); + } +} + +/* + * Allocate some MAS for this reservation based on current local + * availability, the reservation parameters (max_mas, min_mas, + * sparsity), and the WiMedia rules for MAS allocations. + * + * Returns -EBUSY is insufficient free MAS are available. + * + * FIXME: to simplify this, only safe reservations with a single row + * component in zones 1 to 15 are tried (zone 0 is skipped to avoid + * problems with the MAS reserved for the BP). + * + * [ECMA-368] section B.2. + */ +static int uwb_rsv_alloc_mas(struct uwb_rsv *rsv) +{ + static const int safe_mas_in_row[UWB_NUM_ZONES] = { + 8, 7, 6, 5, 4, 4, 4, 4, 4, 4, 4, 4, 4, 3, 2, 1, + }; + int n, r; + struct uwb_mas_bm mas; + bool found = false; + + /* + * Search all valid safe allocations until either: too few MAS + * are available; or the smallest allocation with sufficient + * MAS is found. + * + * The top of the zones are preferred, so space for larger + * allocations is available in the bottom of the zone (e.g., a + * 15 MAS allocation should start in row 14 leaving space for + * a 120 MAS allocation at row 0). + */ + for (n = safe_mas_in_row[0]; n >= 1; n--) { + int num_mas; + + num_mas = n * (UWB_NUM_ZONES - 1); + if (num_mas < rsv->min_mas) + break; + if (found && num_mas < rsv->max_mas) + break; + + for (r = UWB_MAS_PER_ZONE-1; r >= 0; r--) { + if (safe_mas_in_row[r] < n) + continue; + uwb_rsv_gen_alloc_row(&mas, r, n, 1, UWB_NUM_ZONES); + if (uwb_drp_avail_reserve_pending(rsv->rc, &mas) == 0) { + found = true; + break; + } + } + } + + if (!found) + return -EBUSY; + + bitmap_copy(rsv->mas.bm, mas.bm, UWB_NUM_MAS); + return 0; +} + +static void uwb_rsv_stroke_timer(struct uwb_rsv *rsv) +{ + int sframes = UWB_MAX_LOST_BEACONS; + + /* + * Multicast reservations can become established within 1 + * super frame and should not be terminated if no response is + * received. + */ + if (rsv->is_multicast) { + if (rsv->state == UWB_RSV_STATE_O_INITIATED) + sframes = 1; + if (rsv->state == UWB_RSV_STATE_O_ESTABLISHED) + sframes = 0; + } + + rsv->expired = false; + if (sframes > 0) { + /* + * Add an additional 2 superframes to account for the + * time to send the SET DRP IE command. + */ + unsigned timeout_us = (sframes + 2) * UWB_SUPERFRAME_LENGTH_US; + mod_timer(&rsv->timer, jiffies + usecs_to_jiffies(timeout_us)); + } else + del_timer(&rsv->timer); +} + +/* + * Update a reservations state, and schedule an update of the + * transmitted DRP IEs. + */ +static void uwb_rsv_state_update(struct uwb_rsv *rsv, + enum uwb_rsv_state new_state) +{ + rsv->state = new_state; + rsv->ie_valid = false; + + uwb_rsv_dump(rsv); + + uwb_rsv_stroke_timer(rsv); + uwb_rsv_sched_update(rsv->rc); +} + +static void uwb_rsv_callback(struct uwb_rsv *rsv) +{ + if (rsv->callback) + rsv->callback(rsv); +} + +void uwb_rsv_set_state(struct uwb_rsv *rsv, enum uwb_rsv_state new_state) +{ + if (rsv->state == new_state) { + switch (rsv->state) { + case UWB_RSV_STATE_O_ESTABLISHED: + case UWB_RSV_STATE_T_ACCEPTED: + case UWB_RSV_STATE_NONE: + uwb_rsv_stroke_timer(rsv); + break; + default: + /* Expecting a state transition so leave timer + as-is. */ + break; + } + return; + } + + switch (new_state) { + case UWB_RSV_STATE_NONE: + uwb_drp_avail_release(rsv->rc, &rsv->mas); + uwb_rsv_put_stream(rsv); + uwb_rsv_state_update(rsv, UWB_RSV_STATE_NONE); + uwb_rsv_callback(rsv); + break; + case UWB_RSV_STATE_O_INITIATED: + uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_INITIATED); + break; + case UWB_RSV_STATE_O_PENDING: + uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_PENDING); + break; + case UWB_RSV_STATE_O_ESTABLISHED: + uwb_drp_avail_reserve(rsv->rc, &rsv->mas); + uwb_rsv_state_update(rsv, UWB_RSV_STATE_O_ESTABLISHED); + uwb_rsv_callback(rsv); + break; + case UWB_RSV_STATE_T_ACCEPTED: + uwb_drp_avail_reserve(rsv->rc, &rsv->mas); + uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_ACCEPTED); + uwb_rsv_callback(rsv); + break; + case UWB_RSV_STATE_T_DENIED: + uwb_rsv_state_update(rsv, UWB_RSV_STATE_T_DENIED); + break; + default: + dev_err(&rsv->rc->uwb_dev.dev, "unhandled state: %s (%d)\n", + uwb_rsv_state_str(new_state), new_state); + } +} + +static struct uwb_rsv *uwb_rsv_alloc(struct uwb_rc *rc) +{ + struct uwb_rsv *rsv; + + rsv = kzalloc(sizeof(struct uwb_rsv), GFP_KERNEL); + if (!rsv) + return NULL; + + INIT_LIST_HEAD(&rsv->rc_node); + INIT_LIST_HEAD(&rsv->pal_node); + init_timer(&rsv->timer); + rsv->timer.function = uwb_rsv_timer; + rsv->timer.data = (unsigned long)rsv; + + rsv->rc = rc; + + return rsv; +} + +static void uwb_rsv_free(struct uwb_rsv *rsv) +{ + uwb_dev_put(rsv->owner); + if (rsv->target.type == UWB_RSV_TARGET_DEV) + uwb_dev_put(rsv->target.dev); + kfree(rsv); +} + +/** + * uwb_rsv_create - allocate and initialize a UWB reservation structure + * @rc: the radio controller + * @cb: callback to use when the reservation completes or terminates + * @pal_priv: data private to the PAL to be passed in the callback + * + * The callback is called when the state of the reservation changes from: + * + * - pending to accepted + * - pending to denined + * - accepted to terminated + * - pending to terminated + */ +struct uwb_rsv *uwb_rsv_create(struct uwb_rc *rc, uwb_rsv_cb_f cb, void *pal_priv) +{ + struct uwb_rsv *rsv; + + rsv = uwb_rsv_alloc(rc); + if (!rsv) + return NULL; + + rsv->callback = cb; + rsv->pal_priv = pal_priv; + + return rsv; +} +EXPORT_SYMBOL_GPL(uwb_rsv_create); + +void uwb_rsv_remove(struct uwb_rsv *rsv) +{ + if (rsv->state != UWB_RSV_STATE_NONE) + uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE); + del_timer_sync(&rsv->timer); + list_del(&rsv->rc_node); + uwb_rsv_free(rsv); +} + +/** + * uwb_rsv_destroy - free a UWB reservation structure + * @rsv: the reservation to free + * + * The reservation will be terminated if it is pending or established. + */ +void uwb_rsv_destroy(struct uwb_rsv *rsv) +{ + struct uwb_rc *rc = rsv->rc; + + mutex_lock(&rc->rsvs_mutex); + uwb_rsv_remove(rsv); + mutex_unlock(&rc->rsvs_mutex); +} +EXPORT_SYMBOL_GPL(uwb_rsv_destroy); + +/** + * usb_rsv_establish - start a reservation establishment + * @rsv: the reservation + * + * The PAL should fill in @rsv's owner, target, type, max_mas, + * min_mas, sparsity and is_multicast fields. If the target is a + * uwb_dev it must be referenced. + * + * The reservation's callback will be called when the reservation is + * accepted, denied or times out. + */ +int uwb_rsv_establish(struct uwb_rsv *rsv) +{ + struct uwb_rc *rc = rsv->rc; + int ret; + + mutex_lock(&rc->rsvs_mutex); + + ret = uwb_rsv_get_stream(rsv); + if (ret) + goto out; + + ret = uwb_rsv_alloc_mas(rsv); + if (ret) { + uwb_rsv_put_stream(rsv); + goto out; + } + + list_add_tail(&rsv->rc_node, &rc->reservations); + rsv->owner = &rc->uwb_dev; + uwb_dev_get(rsv->owner); + uwb_rsv_set_state(rsv, UWB_RSV_STATE_O_INITIATED); +out: + mutex_unlock(&rc->rsvs_mutex); + return ret; +} +EXPORT_SYMBOL_GPL(uwb_rsv_establish); + +/** + * uwb_rsv_modify - modify an already established reservation + * @rsv: the reservation to modify + * @max_mas: new maximum MAS to reserve + * @min_mas: new minimum MAS to reserve + * @sparsity: new sparsity to use + * + * FIXME: implement this once there are PALs that use it. + */ +int uwb_rsv_modify(struct uwb_rsv *rsv, int max_mas, int min_mas, int sparsity) +{ + return -ENOSYS; +} +EXPORT_SYMBOL_GPL(uwb_rsv_modify); + +/** + * uwb_rsv_terminate - terminate an established reservation + * @rsv: the reservation to terminate + * + * A reservation is terminated by removing the DRP IE from the beacon, + * the other end will consider the reservation to be terminated when + * it does not see the DRP IE for at least mMaxLostBeacons. + * + * If applicable, the reference to the target uwb_dev will be released. + */ +void uwb_rsv_terminate(struct uwb_rsv *rsv) +{ + struct uwb_rc *rc = rsv->rc; + + mutex_lock(&rc->rsvs_mutex); + + uwb_rsv_set_state(rsv, UWB_RSV_STATE_NONE); + + mutex_unlock(&rc->rsvs_mutex); +} +EXPORT_SYMBOL_GPL(uwb_rsv_terminate); + +/** + * uwb_rsv_accept - accept a new reservation from a peer + * @rsv: the reservation + * @cb: call back for reservation changes + * @pal_priv: data to be passed in the above call back + * + * Reservation requests from peers are denied unless a PAL accepts it + * by calling this function. + */ +void uwb_rsv_accept(struct uwb_rsv *rsv, uwb_rsv_cb_f cb, void *pal_priv) +{ + rsv->callback = cb; + rsv->pal_priv = pal_priv; + rsv->state = UWB_RSV_STATE_T_ACCEPTED; +} +EXPORT_SYMBOL_GPL(uwb_rsv_accept); + +/* + * Is a received DRP IE for this reservation? + */ +static bool uwb_rsv_match(struct uwb_rsv *rsv, struct uwb_dev *src, + struct uwb_ie_drp *drp_ie) +{ + struct uwb_dev_addr *rsv_src; + int stream; + + stream = uwb_ie_drp_stream_index(drp_ie); + + if (rsv->stream != stream) + return false; + + switch (rsv->target.type) { + case UWB_RSV_TARGET_DEVADDR: + return rsv->stream == stream; + case UWB_RSV_TARGET_DEV: + if (uwb_ie_drp_owner(drp_ie)) + rsv_src = &rsv->owner->dev_addr; + else + rsv_src = &rsv->target.dev->dev_addr; + return uwb_dev_addr_cmp(&src->dev_addr, rsv_src) == 0; + } + return false; +} + +static struct uwb_rsv *uwb_rsv_new_target(struct uwb_rc *rc, + struct uwb_dev *src, + struct uwb_ie_drp *drp_ie) +{ + struct uwb_rsv *rsv; + struct uwb_pal *pal; + enum uwb_rsv_state state; + + rsv = uwb_rsv_alloc(rc); + if (!rsv) + return NULL; + + rsv->rc = rc; + rsv->owner = src; + uwb_dev_get(rsv->owner); + rsv->target.type = UWB_RSV_TARGET_DEV; + rsv->target.dev = &rc->uwb_dev; + rsv->type = uwb_ie_drp_type(drp_ie); + rsv->stream = uwb_ie_drp_stream_index(drp_ie); + set_bit(rsv->stream, rsv->owner->streams); + uwb_drp_ie_to_bm(&rsv->mas, drp_ie); + + /* + * See if any PALs are interested in this reservation. If not, + * deny the request. + */ + rsv->state = UWB_RSV_STATE_T_DENIED; + spin_lock(&rc->pal_lock); + list_for_each_entry(pal, &rc->pals, node) { + if (pal->new_rsv) + pal->new_rsv(rsv); + if (rsv->state == UWB_RSV_STATE_T_ACCEPTED) + break; + } + spin_unlock(&rc->pal_lock); + + list_add_tail(&rsv->rc_node, &rc->reservations); + state = rsv->state; + rsv->state = UWB_RSV_STATE_NONE; + uwb_rsv_set_state(rsv, state); + + return rsv; +} + +/** + * uwb_rsv_find - find a reservation for a received DRP IE. + * @rc: the radio controller + * @src: source of the DRP IE + * @drp_ie: the DRP IE + * + * If the reservation cannot be found and the DRP IE is from a peer + * attempting to establish a new reservation, create a new reservation + * and add it to the list. + */ +struct uwb_rsv *uwb_rsv_find(struct uwb_rc *rc, struct uwb_dev *src, + struct uwb_ie_drp *drp_ie) +{ + struct uwb_rsv *rsv; + + list_for_each_entry(rsv, &rc->reservations, rc_node) { + if (uwb_rsv_match(rsv, src, drp_ie)) + return rsv; + } + + if (uwb_ie_drp_owner(drp_ie)) + return uwb_rsv_new_target(rc, src, drp_ie); + + return NULL; +} + +/* + * Go through all the reservations and check for timeouts and (if + * necessary) update their DRP IEs. + * + * FIXME: look at building the SET_DRP_IE command here rather than + * having to rescan the list in uwb_rc_send_all_drp_ie(). + */ +static bool uwb_rsv_update_all(struct uwb_rc *rc) +{ + struct uwb_rsv *rsv, *t; + bool ie_updated = false; + + list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) { + if (rsv->expired) + uwb_drp_handle_timeout(rsv); + if (!rsv->ie_valid) { + uwb_drp_ie_update(rsv); + ie_updated = true; + } + } + + return ie_updated; +} + +void uwb_rsv_sched_update(struct uwb_rc *rc) +{ + queue_work(rc->rsv_workq, &rc->rsv_update_work); +} + +/* + * Update DRP IEs and, if necessary, the DRP Availability IE and send + * the updated IEs to the radio controller. + */ +static void uwb_rsv_update_work(struct work_struct *work) +{ + struct uwb_rc *rc = container_of(work, struct uwb_rc, rsv_update_work); + bool ie_updated; + + mutex_lock(&rc->rsvs_mutex); + + ie_updated = uwb_rsv_update_all(rc); + + if (!rc->drp_avail.ie_valid) { + uwb_drp_avail_ie_update(rc); + ie_updated = true; + } + + if (ie_updated) + uwb_rc_send_all_drp_ie(rc); + + mutex_unlock(&rc->rsvs_mutex); +} + +static void uwb_rsv_timer(unsigned long arg) +{ + struct uwb_rsv *rsv = (struct uwb_rsv *)arg; + + rsv->expired = true; + uwb_rsv_sched_update(rsv->rc); +} + +void uwb_rsv_init(struct uwb_rc *rc) +{ + INIT_LIST_HEAD(&rc->reservations); + mutex_init(&rc->rsvs_mutex); + INIT_WORK(&rc->rsv_update_work, uwb_rsv_update_work); + + bitmap_complement(rc->uwb_dev.streams, rc->uwb_dev.streams, UWB_NUM_STREAMS); +} + +int uwb_rsv_setup(struct uwb_rc *rc) +{ + char name[16]; + + snprintf(name, sizeof(name), "%s_rsvd", dev_name(&rc->uwb_dev.dev)); + rc->rsv_workq = create_singlethread_workqueue(name); + if (rc->rsv_workq == NULL) + return -ENOMEM; + + return 0; +} + +void uwb_rsv_cleanup(struct uwb_rc *rc) +{ + struct uwb_rsv *rsv, *t; + + mutex_lock(&rc->rsvs_mutex); + list_for_each_entry_safe(rsv, t, &rc->reservations, rc_node) { + uwb_rsv_remove(rsv); + } + mutex_unlock(&rc->rsvs_mutex); + + cancel_work_sync(&rc->rsv_update_work); + destroy_workqueue(rc->rsv_workq); +} diff --git a/drivers/uwb/scan.c b/drivers/uwb/scan.c new file mode 100644 index 000000000000..2d270748f32b --- /dev/null +++ b/drivers/uwb/scan.c @@ -0,0 +1,133 @@ +/* + * Ultra Wide Band + * Scanning management + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * + * FIXME: docs + * FIXME: there are issues here on how BEACON and SCAN on USB RCI deal + * with each other. Currently seems that START_BEACON while + * SCAN_ONLY will cancel the scan, so we need to update the + * state here. Clarification request sent by email on + * 10/05/2005. + * 10/28/2005 No clear answer heard--maybe we'll hack the API + * so that when we start beaconing, if the HC is + * scanning in a mode not compatible with beaconing + * we just fail. + */ + +#include <linux/device.h> +#include <linux/err.h> +#include "uwb-internal.h" + + +/** + * Start/stop scanning in a radio controller + * + * @rc: UWB Radio Controlller + * @channel: Channel to scan; encodings in WUSB1.0[Table 5.12] + * @type: Type of scanning to do. + * @bpst_offset: value at which to start scanning (if type == + * UWB_SCAN_ONLY_STARTTIME) + * @returns: 0 if ok, < 0 errno code on error + * + * We put the command on kmalloc'ed memory as some arches cannot do + * USB from the stack. The reply event is copied from an stage buffer, + * so it can be in the stack. See WUSB1.0[8.6.2.4] for more details. + */ +int uwb_rc_scan(struct uwb_rc *rc, + unsigned channel, enum uwb_scan_type type, + unsigned bpst_offset) +{ + int result; + struct uwb_rc_cmd_scan *cmd; + struct uwb_rc_evt_confirm reply; + + result = -ENOMEM; + cmd = kzalloc(sizeof(*cmd), GFP_KERNEL); + if (cmd == NULL) + goto error_kzalloc; + mutex_lock(&rc->uwb_dev.mutex); + cmd->rccb.bCommandType = UWB_RC_CET_GENERAL; + cmd->rccb.wCommand = cpu_to_le16(UWB_RC_CMD_SCAN); + cmd->bChannelNumber = channel; + cmd->bScanState = type; + cmd->wStartTime = cpu_to_le16(bpst_offset); + reply.rceb.bEventType = UWB_RC_CET_GENERAL; + reply.rceb.wEvent = UWB_RC_CMD_SCAN; + result = uwb_rc_cmd(rc, "SCAN", &cmd->rccb, sizeof(*cmd), + &reply.rceb, sizeof(reply)); + if (result < 0) + goto error_cmd; + if (reply.bResultCode != UWB_RC_RES_SUCCESS) { + dev_err(&rc->uwb_dev.dev, + "SCAN: command execution failed: %s (%d)\n", + uwb_rc_strerror(reply.bResultCode), reply.bResultCode); + result = -EIO; + goto error_cmd; + } + rc->scanning = channel; + rc->scan_type = type; +error_cmd: + mutex_unlock(&rc->uwb_dev.mutex); + kfree(cmd); +error_kzalloc: + return result; +} + +/* + * Print scanning state + */ +static ssize_t uwb_rc_scan_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_rc *rc = uwb_dev->rc; + ssize_t result; + + mutex_lock(&rc->uwb_dev.mutex); + result = sprintf(buf, "%d %d\n", rc->scanning, rc->scan_type); + mutex_unlock(&rc->uwb_dev.mutex); + return result; +} + +/* + * + */ +static ssize_t uwb_rc_scan_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t size) +{ + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + struct uwb_rc *rc = uwb_dev->rc; + unsigned channel; + unsigned type; + unsigned bpst_offset = 0; + ssize_t result = -EINVAL; + + result = sscanf(buf, "%u %u %u\n", &channel, &type, &bpst_offset); + if (result >= 2 && type < UWB_SCAN_TOP) + result = uwb_rc_scan(rc, channel, type, bpst_offset); + + return result < 0 ? result : size; +} + +/** Radio Control sysfs interface (declaration) */ +DEVICE_ATTR(scan, S_IRUGO | S_IWUSR, uwb_rc_scan_show, uwb_rc_scan_store); diff --git a/drivers/uwb/umc-bus.c b/drivers/uwb/umc-bus.c new file mode 100644 index 000000000000..2d8d62d9f53e --- /dev/null +++ b/drivers/uwb/umc-bus.c @@ -0,0 +1,218 @@ +/* + * Bus for UWB Multi-interface Controller capabilities. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This file is released under the GNU GPL v2. + */ +#include <linux/kernel.h> +#include <linux/sysfs.h> +#include <linux/workqueue.h> +#include <linux/uwb/umc.h> +#include <linux/pci.h> + +static int umc_bus_unbind_helper(struct device *dev, void *data) +{ + struct device *parent = data; + + if (dev->parent == parent && dev->driver) + device_release_driver(dev); + return 0; +} + +/** + * umc_controller_reset - reset the whole UMC controller + * @umc: the UMC device for the radio controller. + * + * Drivers will be unbound from all UMC devices belonging to the + * controller and then the radio controller will be rebound. The + * radio controller is expected to do a full hardware reset when it is + * probed. + * + * If this is called while a probe() or remove() is in progress it + * will return -EAGAIN and not perform the reset. + */ +int umc_controller_reset(struct umc_dev *umc) +{ + struct device *parent = umc->dev.parent; + int ret; + + if (down_trylock(&parent->sem)) + return -EAGAIN; + bus_for_each_dev(&umc_bus_type, NULL, parent, umc_bus_unbind_helper); + ret = device_attach(&umc->dev); + if (ret == 1) + ret = 0; + up(&parent->sem); + + return ret; +} +EXPORT_SYMBOL_GPL(umc_controller_reset); + +/** + * umc_match_pci_id - match a UMC driver to a UMC device's parent PCI device. + * @umc_drv: umc driver with match_data pointing to a zero-terminated + * table of pci_device_id's. + * @umc: umc device whose parent is to be matched. + */ +int umc_match_pci_id(struct umc_driver *umc_drv, struct umc_dev *umc) +{ + const struct pci_device_id *id_table = umc_drv->match_data; + struct pci_dev *pci; + + if (umc->dev.parent->bus != &pci_bus_type) + return 0; + + pci = to_pci_dev(umc->dev.parent); + return pci_match_id(id_table, pci) != NULL; +} +EXPORT_SYMBOL_GPL(umc_match_pci_id); + +static int umc_bus_rescan_helper(struct device *dev, void *data) +{ + int ret = 0; + + if (!dev->driver) + ret = device_attach(dev); + + return ret < 0 ? ret : 0; +} + +static void umc_bus_rescan(void) +{ + int err; + + /* + * We can't use bus_rescan_devices() here as it deadlocks when + * it tries to retake the dev->parent semaphore. + */ + err = bus_for_each_dev(&umc_bus_type, NULL, NULL, umc_bus_rescan_helper); + if (err < 0) + printk(KERN_WARNING "%s: rescan of bus failed: %d\n", + KBUILD_MODNAME, err); +} + +static int umc_bus_match(struct device *dev, struct device_driver *drv) +{ + struct umc_dev *umc = to_umc_dev(dev); + struct umc_driver *umc_driver = to_umc_driver(drv); + + if (umc->cap_id == umc_driver->cap_id) { + if (umc_driver->match) + return umc_driver->match(umc_driver, umc); + else + return 1; + } + return 0; +} + +static int umc_device_probe(struct device *dev) +{ + struct umc_dev *umc; + struct umc_driver *umc_driver; + int err; + + umc_driver = to_umc_driver(dev->driver); + umc = to_umc_dev(dev); + + get_device(dev); + err = umc_driver->probe(umc); + if (err) + put_device(dev); + else + umc_bus_rescan(); + + return err; +} + +static int umc_device_remove(struct device *dev) +{ + struct umc_dev *umc; + struct umc_driver *umc_driver; + + umc_driver = to_umc_driver(dev->driver); + umc = to_umc_dev(dev); + + umc_driver->remove(umc); + put_device(dev); + return 0; +} + +static int umc_device_suspend(struct device *dev, pm_message_t state) +{ + struct umc_dev *umc; + struct umc_driver *umc_driver; + int err = 0; + + umc = to_umc_dev(dev); + + if (dev->driver) { + umc_driver = to_umc_driver(dev->driver); + if (umc_driver->suspend) + err = umc_driver->suspend(umc, state); + } + return err; +} + +static int umc_device_resume(struct device *dev) +{ + struct umc_dev *umc; + struct umc_driver *umc_driver; + int err = 0; + + umc = to_umc_dev(dev); + + if (dev->driver) { + umc_driver = to_umc_driver(dev->driver); + if (umc_driver->resume) + err = umc_driver->resume(umc); + } + return err; +} + +static ssize_t capability_id_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct umc_dev *umc = to_umc_dev(dev); + + return sprintf(buf, "0x%02x\n", umc->cap_id); +} + +static ssize_t version_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct umc_dev *umc = to_umc_dev(dev); + + return sprintf(buf, "0x%04x\n", umc->version); +} + +static struct device_attribute umc_dev_attrs[] = { + __ATTR_RO(capability_id), + __ATTR_RO(version), + __ATTR_NULL, +}; + +struct bus_type umc_bus_type = { + .name = "umc", + .match = umc_bus_match, + .probe = umc_device_probe, + .remove = umc_device_remove, + .suspend = umc_device_suspend, + .resume = umc_device_resume, + .dev_attrs = umc_dev_attrs, +}; +EXPORT_SYMBOL_GPL(umc_bus_type); + +static int __init umc_bus_init(void) +{ + return bus_register(&umc_bus_type); +} +module_init(umc_bus_init); + +static void __exit umc_bus_exit(void) +{ + bus_unregister(&umc_bus_type); +} +module_exit(umc_bus_exit); + +MODULE_DESCRIPTION("UWB Multi-interface Controller capability bus"); +MODULE_AUTHOR("Cambridge Silicon Radio Ltd."); +MODULE_LICENSE("GPL"); diff --git a/drivers/uwb/umc-dev.c b/drivers/uwb/umc-dev.c new file mode 100644 index 000000000000..aa44e1c1a102 --- /dev/null +++ b/drivers/uwb/umc-dev.c @@ -0,0 +1,104 @@ +/* + * UWB Multi-interface Controller device management. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This file is released under the GNU GPL v2. + */ +#include <linux/kernel.h> +#include <linux/uwb/umc.h> +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +static void umc_device_release(struct device *dev) +{ + struct umc_dev *umc = to_umc_dev(dev); + + kfree(umc); +} + +/** + * umc_device_create - allocate a child UMC device + * @parent: parent of the new UMC device. + * @n: index of the new device. + * + * The new UMC device will have a bus ID of the parent with '-n' + * appended. + */ +struct umc_dev *umc_device_create(struct device *parent, int n) +{ + struct umc_dev *umc; + + umc = kzalloc(sizeof(struct umc_dev), GFP_KERNEL); + if (umc) { + snprintf(umc->dev.bus_id, sizeof(umc->dev.bus_id), "%s-%d", + parent->bus_id, n); + umc->dev.parent = parent; + umc->dev.bus = &umc_bus_type; + umc->dev.release = umc_device_release; + + umc->dev.dma_mask = parent->dma_mask; + } + return umc; +} +EXPORT_SYMBOL_GPL(umc_device_create); + +/** + * umc_device_register - register a UMC device + * @umc: pointer to the UMC device + * + * The memory resource for the UMC device is acquired and the device + * registered with the system. + */ +int umc_device_register(struct umc_dev *umc) +{ + int err; + + d_fnstart(3, &umc->dev, "(umc_dev %p)\n", umc); + + err = request_resource(umc->resource.parent, &umc->resource); + if (err < 0) { + dev_err(&umc->dev, "can't allocate resource range " + "%016Lx to %016Lx: %d\n", + (unsigned long long)umc->resource.start, + (unsigned long long)umc->resource.end, + err); + goto error_request_resource; + } + + err = device_register(&umc->dev); + if (err < 0) + goto error_device_register; + d_fnend(3, &umc->dev, "(umc_dev %p) = 0\n", umc); + return 0; + +error_device_register: + release_resource(&umc->resource); +error_request_resource: + d_fnend(3, &umc->dev, "(umc_dev %p) = %d\n", umc, err); + return err; +} +EXPORT_SYMBOL_GPL(umc_device_register); + +/** + * umc_device_unregister - unregister a UMC device + * @umc: pointer to the UMC device + * + * First we unregister the device, make sure the driver can do it's + * resource release thing and then we try to release any left over + * resources. We take a ref to the device, to make sure it doesn't + * dissapear under our feet. + */ +void umc_device_unregister(struct umc_dev *umc) +{ + struct device *dev; + if (!umc) + return; + dev = get_device(&umc->dev); + d_fnstart(3, dev, "(umc_dev %p)\n", umc); + device_unregister(&umc->dev); + release_resource(&umc->resource); + d_fnend(3, dev, "(umc_dev %p) = void\n", umc); + put_device(dev); +} +EXPORT_SYMBOL_GPL(umc_device_unregister); diff --git a/drivers/uwb/umc-drv.c b/drivers/uwb/umc-drv.c new file mode 100644 index 000000000000..367b5eb85d60 --- /dev/null +++ b/drivers/uwb/umc-drv.c @@ -0,0 +1,31 @@ +/* + * UWB Multi-interface Controller driver management. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This file is released under the GNU GPL v2. + */ +#include <linux/kernel.h> +#include <linux/uwb/umc.h> + +int __umc_driver_register(struct umc_driver *umc_drv, struct module *module, + const char *mod_name) +{ + umc_drv->driver.name = umc_drv->name; + umc_drv->driver.owner = module; + umc_drv->driver.mod_name = mod_name; + umc_drv->driver.bus = &umc_bus_type; + + return driver_register(&umc_drv->driver); +} +EXPORT_SYMBOL_GPL(__umc_driver_register); + +/** + * umc_driver_register - unregister a UMC capabiltity driver. + * @umc_drv: pointer to the driver. + */ +void umc_driver_unregister(struct umc_driver *umc_drv) +{ + driver_unregister(&umc_drv->driver); +} +EXPORT_SYMBOL_GPL(umc_driver_unregister); diff --git a/drivers/uwb/uwb-debug.c b/drivers/uwb/uwb-debug.c new file mode 100644 index 000000000000..6d232c35d07d --- /dev/null +++ b/drivers/uwb/uwb-debug.c @@ -0,0 +1,367 @@ +/* + * Ultra Wide Band + * Debug support + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: doc + */ + +#include <linux/spinlock.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/notifier.h> +#include <linux/device.h> +#include <linux/debugfs.h> +#include <linux/uaccess.h> +#include <linux/seq_file.h> + +#include <linux/uwb/debug-cmd.h> +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +#include "uwb-internal.h" + +void dump_bytes(struct device *dev, const void *_buf, size_t rsize) +{ + const char *buf = _buf; + char line[32]; + size_t offset = 0; + int cnt, cnt2; + for (cnt = 0; cnt < rsize; cnt += 8) { + size_t rtop = rsize - cnt < 8 ? rsize - cnt : 8; + for (offset = cnt2 = 0; cnt2 < rtop; cnt2++) { + offset += scnprintf(line + offset, sizeof(line) - offset, + "%02x ", buf[cnt + cnt2] & 0xff); + } + if (dev) + dev_info(dev, "%s\n", line); + else + printk(KERN_INFO "%s\n", line); + } +} +EXPORT_SYMBOL_GPL(dump_bytes); + +/* + * Debug interface + * + * Per radio controller debugfs files (in uwb/uwbN/): + * + * command: Flexible command interface (see <linux/uwb/debug-cmd.h>). + * + * reservations: information on reservations. + * + * accept: Set to true (Y or 1) to accept reservation requests from + * peers. + * + * drp_avail: DRP availability information. + */ + +struct uwb_dbg { + struct uwb_pal pal; + + u32 accept; + struct list_head rsvs; + + struct dentry *root_d; + struct dentry *command_f; + struct dentry *reservations_f; + struct dentry *accept_f; + struct dentry *drp_avail_f; +}; + +static struct dentry *root_dir; + +static void uwb_dbg_rsv_cb(struct uwb_rsv *rsv) +{ + struct uwb_rc *rc = rsv->rc; + struct device *dev = &rc->uwb_dev.dev; + struct uwb_dev_addr devaddr; + char owner[UWB_ADDR_STRSIZE], target[UWB_ADDR_STRSIZE]; + + uwb_dev_addr_print(owner, sizeof(owner), &rsv->owner->dev_addr); + if (rsv->target.type == UWB_RSV_TARGET_DEV) + devaddr = rsv->target.dev->dev_addr; + else + devaddr = rsv->target.devaddr; + uwb_dev_addr_print(target, sizeof(target), &devaddr); + + dev_dbg(dev, "debug: rsv %s -> %s: %s\n", + owner, target, uwb_rsv_state_str(rsv->state)); +} + +static int cmd_rsv_establish(struct uwb_rc *rc, + struct uwb_dbg_cmd_rsv_establish *cmd) +{ + struct uwb_mac_addr macaddr; + struct uwb_rsv *rsv; + struct uwb_dev *target; + int ret; + + memcpy(&macaddr, cmd->target, sizeof(macaddr)); + target = uwb_dev_get_by_macaddr(rc, &macaddr); + if (target == NULL) + return -ENODEV; + + rsv = uwb_rsv_create(rc, uwb_dbg_rsv_cb, NULL); + if (rsv == NULL) { + uwb_dev_put(target); + return -ENOMEM; + } + + rsv->owner = &rc->uwb_dev; + rsv->target.type = UWB_RSV_TARGET_DEV; + rsv->target.dev = target; + rsv->type = cmd->type; + rsv->max_mas = cmd->max_mas; + rsv->min_mas = cmd->min_mas; + rsv->sparsity = cmd->sparsity; + + ret = uwb_rsv_establish(rsv); + if (ret) + uwb_rsv_destroy(rsv); + else + list_add_tail(&rsv->pal_node, &rc->dbg->rsvs); + + return ret; +} + +static int cmd_rsv_terminate(struct uwb_rc *rc, + struct uwb_dbg_cmd_rsv_terminate *cmd) +{ + struct uwb_rsv *rsv, *found = NULL; + int i = 0; + + list_for_each_entry(rsv, &rc->dbg->rsvs, pal_node) { + if (i == cmd->index) { + found = rsv; + break; + } + } + if (!found) + return -EINVAL; + + list_del(&found->pal_node); + uwb_rsv_terminate(found); + + return 0; +} + +static int command_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + + return 0; +} + +static ssize_t command_write(struct file *file, const char __user *buf, + size_t len, loff_t *off) +{ + struct uwb_rc *rc = file->private_data; + struct uwb_dbg_cmd cmd; + int ret; + + if (len != sizeof(struct uwb_dbg_cmd)) + return -EINVAL; + + if (copy_from_user(&cmd, buf, len) != 0) + return -EFAULT; + + switch (cmd.type) { + case UWB_DBG_CMD_RSV_ESTABLISH: + ret = cmd_rsv_establish(rc, &cmd.rsv_establish); + break; + case UWB_DBG_CMD_RSV_TERMINATE: + ret = cmd_rsv_terminate(rc, &cmd.rsv_terminate); + break; + default: + return -EINVAL; + } + + return ret < 0 ? ret : len; +} + +static struct file_operations command_fops = { + .open = command_open, + .write = command_write, + .read = NULL, + .llseek = no_llseek, + .owner = THIS_MODULE, +}; + +static int reservations_print(struct seq_file *s, void *p) +{ + struct uwb_rc *rc = s->private; + struct uwb_rsv *rsv; + + mutex_lock(&rc->rsvs_mutex); + + list_for_each_entry(rsv, &rc->reservations, rc_node) { + struct uwb_dev_addr devaddr; + char owner[UWB_ADDR_STRSIZE], target[UWB_ADDR_STRSIZE]; + bool is_owner; + char buf[72]; + + uwb_dev_addr_print(owner, sizeof(owner), &rsv->owner->dev_addr); + if (rsv->target.type == UWB_RSV_TARGET_DEV) { + devaddr = rsv->target.dev->dev_addr; + is_owner = &rc->uwb_dev == rsv->owner; + } else { + devaddr = rsv->target.devaddr; + is_owner = true; + } + uwb_dev_addr_print(target, sizeof(target), &devaddr); + + seq_printf(s, "%c %s -> %s: %s\n", + is_owner ? 'O' : 'T', + owner, target, uwb_rsv_state_str(rsv->state)); + seq_printf(s, " stream: %d type: %s\n", + rsv->stream, uwb_rsv_type_str(rsv->type)); + bitmap_scnprintf(buf, sizeof(buf), rsv->mas.bm, UWB_NUM_MAS); + seq_printf(s, " %s\n", buf); + } + + mutex_unlock(&rc->rsvs_mutex); + + return 0; +} + +static int reservations_open(struct inode *inode, struct file *file) +{ + return single_open(file, reservations_print, inode->i_private); +} + +static struct file_operations reservations_fops = { + .open = reservations_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int drp_avail_print(struct seq_file *s, void *p) +{ + struct uwb_rc *rc = s->private; + char buf[72]; + + bitmap_scnprintf(buf, sizeof(buf), rc->drp_avail.global, UWB_NUM_MAS); + seq_printf(s, "global: %s\n", buf); + bitmap_scnprintf(buf, sizeof(buf), rc->drp_avail.local, UWB_NUM_MAS); + seq_printf(s, "local: %s\n", buf); + bitmap_scnprintf(buf, sizeof(buf), rc->drp_avail.pending, UWB_NUM_MAS); + seq_printf(s, "pending: %s\n", buf); + + return 0; +} + +static int drp_avail_open(struct inode *inode, struct file *file) +{ + return single_open(file, drp_avail_print, inode->i_private); +} + +static struct file_operations drp_avail_fops = { + .open = drp_avail_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static void uwb_dbg_new_rsv(struct uwb_rsv *rsv) +{ + struct uwb_rc *rc = rsv->rc; + + if (rc->dbg->accept) + uwb_rsv_accept(rsv, uwb_dbg_rsv_cb, NULL); +} + +/** + * uwb_dbg_add_rc - add a debug interface for a radio controller + * @rc: the radio controller + */ +void uwb_dbg_add_rc(struct uwb_rc *rc) +{ + rc->dbg = kzalloc(sizeof(struct uwb_dbg), GFP_KERNEL); + if (rc->dbg == NULL) + return; + + INIT_LIST_HEAD(&rc->dbg->rsvs); + + uwb_pal_init(&rc->dbg->pal); + rc->dbg->pal.new_rsv = uwb_dbg_new_rsv; + uwb_pal_register(rc, &rc->dbg->pal); + if (root_dir) { + rc->dbg->root_d = debugfs_create_dir(dev_name(&rc->uwb_dev.dev), + root_dir); + rc->dbg->command_f = debugfs_create_file("command", 0200, + rc->dbg->root_d, rc, + &command_fops); + rc->dbg->reservations_f = debugfs_create_file("reservations", 0444, + rc->dbg->root_d, rc, + &reservations_fops); + rc->dbg->accept_f = debugfs_create_bool("accept", 0644, + rc->dbg->root_d, + &rc->dbg->accept); + rc->dbg->drp_avail_f = debugfs_create_file("drp_avail", 0444, + rc->dbg->root_d, rc, + &drp_avail_fops); + } +} + +/** + * uwb_dbg_add_rc - remove a radio controller's debug interface + * @rc: the radio controller + */ +void uwb_dbg_del_rc(struct uwb_rc *rc) +{ + struct uwb_rsv *rsv, *t; + + if (rc->dbg == NULL) + return; + + list_for_each_entry_safe(rsv, t, &rc->dbg->rsvs, pal_node) { + uwb_rsv_destroy(rsv); + } + + uwb_pal_unregister(rc, &rc->dbg->pal); + + if (root_dir) { + debugfs_remove(rc->dbg->drp_avail_f); + debugfs_remove(rc->dbg->accept_f); + debugfs_remove(rc->dbg->reservations_f); + debugfs_remove(rc->dbg->command_f); + debugfs_remove(rc->dbg->root_d); + } +} + +/** + * uwb_dbg_exit - initialize the debug interface sub-module + */ +void uwb_dbg_init(void) +{ + root_dir = debugfs_create_dir("uwb", NULL); +} + +/** + * uwb_dbg_exit - clean-up the debug interface sub-module + */ +void uwb_dbg_exit(void) +{ + debugfs_remove(root_dir); +} diff --git a/drivers/uwb/uwb-internal.h b/drivers/uwb/uwb-internal.h new file mode 100644 index 000000000000..2ad307d12961 --- /dev/null +++ b/drivers/uwb/uwb-internal.h @@ -0,0 +1,305 @@ +/* + * Ultra Wide Band + * UWB internal API + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * This contains most of the internal API for UWB. This is stuff used + * across the stack that of course, is of no interest to the rest. + * + * Some parts might end up going public (like uwb_rc_*())... + */ + +#ifndef __UWB_INTERNAL_H__ +#define __UWB_INTERNAL_H__ + +#include <linux/version.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/uwb.h> +#include <linux/mutex.h> + +struct uwb_beca_e; + +/* General device API */ +extern void uwb_dev_init(struct uwb_dev *uwb_dev); +extern int __uwb_dev_offair(struct uwb_dev *, struct uwb_rc *); +extern int uwb_dev_add(struct uwb_dev *uwb_dev, struct device *parent_dev, + struct uwb_rc *parent_rc); +extern void uwb_dev_rm(struct uwb_dev *uwb_dev); +extern void uwbd_dev_onair(struct uwb_rc *, struct uwb_beca_e *); +extern void uwbd_dev_offair(struct uwb_beca_e *); +void uwb_notify(struct uwb_rc *rc, struct uwb_dev *uwb_dev, enum uwb_notifs event); + +/* General UWB Radio Controller Internal API */ +extern struct uwb_rc *__uwb_rc_try_get(struct uwb_rc *); +static inline struct uwb_rc *__uwb_rc_get(struct uwb_rc *rc) +{ + uwb_dev_get(&rc->uwb_dev); + return rc; +} + +static inline void __uwb_rc_put(struct uwb_rc *rc) +{ + uwb_dev_put(&rc->uwb_dev); +} + +extern int uwb_rc_reset(struct uwb_rc *rc); +extern int uwb_rc_beacon(struct uwb_rc *rc, + int channel, unsigned bpst_offset); +extern int uwb_rc_scan(struct uwb_rc *rc, + unsigned channel, enum uwb_scan_type type, + unsigned bpst_offset); +extern int uwb_rc_send_all_drp_ie(struct uwb_rc *rc); +extern ssize_t uwb_rc_print_IEs(struct uwb_rc *rc, char *, size_t); +extern void uwb_rc_ie_init(struct uwb_rc *); +extern void uwb_rc_ie_init(struct uwb_rc *); +extern ssize_t uwb_rc_ie_setup(struct uwb_rc *); +extern void uwb_rc_ie_release(struct uwb_rc *); +extern int uwb_rc_ie_add(struct uwb_rc *, + const struct uwb_ie_hdr *, size_t); +extern int uwb_rc_ie_rm(struct uwb_rc *, enum uwb_ie); + +extern const char *uwb_rc_strerror(unsigned code); + +/* + * Time to wait for a response to an RC command. + * + * Some commands can take a long time to response. e.g., START_BEACON + * may scan for several superframes before joining an existing beacon + * group and this can take around 600 ms. + */ +#define UWB_RC_CMD_TIMEOUT_MS 1000 /* ms */ + +/* + * Notification/Event Handlers + */ + +struct uwb_rc_neh; + +void uwb_rc_neh_create(struct uwb_rc *rc); +void uwb_rc_neh_destroy(struct uwb_rc *rc); + +struct uwb_rc_neh *uwb_rc_neh_add(struct uwb_rc *rc, struct uwb_rccb *cmd, + u8 expected_type, u16 expected_event, + uwb_rc_cmd_cb_f cb, void *arg); +void uwb_rc_neh_rm(struct uwb_rc *rc, struct uwb_rc_neh *neh); +void uwb_rc_neh_arm(struct uwb_rc *rc, struct uwb_rc_neh *neh); +void uwb_rc_neh_put(struct uwb_rc_neh *neh); + +/* Event size tables */ +extern int uwb_est_create(void); +extern void uwb_est_destroy(void); + + +/* + * UWB Events & management daemon + */ + +/** + * enum uwb_event_type - types of UWB management daemon events + * + * The UWB management daemon (uwbd) can receive two types of events: + * UWB_EVT_TYPE_NOTIF - notification from the radio controller. + * UWB_EVT_TYPE_MSG - a simple message. + */ +enum uwb_event_type { + UWB_EVT_TYPE_NOTIF, + UWB_EVT_TYPE_MSG, +}; + +/** + * struct uwb_event_notif - an event for a radio controller notification + * @size: Size of the buffer (ie: Guaranteed to contain at least + * a full 'struct uwb_rceb') + * @rceb: Pointer to a kmalloced() event payload + */ +struct uwb_event_notif { + size_t size; + struct uwb_rceb *rceb; +}; + +/** + * enum uwb_event_message - an event for a message for asynchronous processing + * + * UWB_EVT_MSG_RESET - reset the radio controller and all PAL hardware. + */ +enum uwb_event_message { + UWB_EVT_MSG_RESET, +}; + +/** + * UWB Event + * @rc: Radio controller that emitted the event (referenced) + * @ts_jiffies: Timestamp, when was it received + * @type: This event's type. + */ +struct uwb_event { + struct list_head list_node; + struct uwb_rc *rc; + unsigned long ts_jiffies; + enum uwb_event_type type; + union { + struct uwb_event_notif notif; + enum uwb_event_message message; + }; +}; + +extern void uwbd_start(void); +extern void uwbd_stop(void); +extern struct uwb_event *uwb_event_alloc(size_t, gfp_t gfp_mask); +extern void uwbd_event_queue(struct uwb_event *); +void uwbd_flush(struct uwb_rc *rc); + +/* UWB event handlers */ +extern int uwbd_evt_handle_rc_beacon(struct uwb_event *); +extern int uwbd_evt_handle_rc_beacon_size(struct uwb_event *); +extern int uwbd_evt_handle_rc_bpoie_change(struct uwb_event *); +extern int uwbd_evt_handle_rc_bp_slot_change(struct uwb_event *); +extern int uwbd_evt_handle_rc_drp(struct uwb_event *); +extern int uwbd_evt_handle_rc_drp_avail(struct uwb_event *); + +int uwbd_msg_handle_reset(struct uwb_event *evt); + + +/* + * Address management + */ +int uwb_rc_dev_addr_assign(struct uwb_rc *rc); +int uwbd_evt_handle_rc_dev_addr_conflict(struct uwb_event *evt); + +/* + * UWB Beacon Cache + * + * Each beacon we received is kept in a cache--when we receive that + * beacon consistently, that means there is a new device that we have + * to add to the system. + */ + +extern unsigned long beacon_timeout_ms; + +/** Beacon cache list */ +struct uwb_beca { + struct list_head list; + size_t entries; + struct mutex mutex; +}; + +extern struct uwb_beca uwb_beca; + +/** + * Beacon cache entry + * + * @jiffies_refresh: last time a beacon was received that refreshed + * this cache entry. + * @uwb_dev: device connected to this beacon. This pointer is not + * safe, you need to get it with uwb_dev_try_get() + * + * @hits: how many time we have seen this beacon since last time we + * cleared it + */ +struct uwb_beca_e { + struct mutex mutex; + struct kref refcnt; + struct list_head node; + struct uwb_mac_addr *mac_addr; + struct uwb_dev_addr dev_addr; + u8 hits; + unsigned long ts_jiffies; + struct uwb_dev *uwb_dev; + struct uwb_rc_evt_beacon *be; + struct stats lqe_stats, rssi_stats; /* radio statistics */ +}; +struct uwb_beacon_frame; +extern ssize_t uwb_bce_print_IEs(struct uwb_dev *, struct uwb_beca_e *, + char *, size_t); +extern struct uwb_beca_e *__uwb_beca_add(struct uwb_rc_evt_beacon *, + struct uwb_beacon_frame *, + unsigned long); + +extern void uwb_bce_kfree(struct kref *_bce); +static inline void uwb_bce_get(struct uwb_beca_e *bce) +{ + kref_get(&bce->refcnt); +} +static inline void uwb_bce_put(struct uwb_beca_e *bce) +{ + kref_put(&bce->refcnt, uwb_bce_kfree); +} +extern void uwb_beca_purge(void); +extern void uwb_beca_release(void); + +struct uwb_dev *uwb_dev_get_by_devaddr(struct uwb_rc *rc, + const struct uwb_dev_addr *devaddr); +struct uwb_dev *uwb_dev_get_by_macaddr(struct uwb_rc *rc, + const struct uwb_mac_addr *macaddr); + +/* -- UWB Sysfs representation */ +extern struct class uwb_rc_class; +extern struct device_attribute dev_attr_mac_address; +extern struct device_attribute dev_attr_beacon; +extern struct device_attribute dev_attr_scan; + +/* -- DRP Bandwidth allocator: bandwidth allocations, reservations, DRP */ +void uwb_rsv_init(struct uwb_rc *rc); +int uwb_rsv_setup(struct uwb_rc *rc); +void uwb_rsv_cleanup(struct uwb_rc *rc); + +void uwb_rsv_set_state(struct uwb_rsv *rsv, enum uwb_rsv_state new_state); +void uwb_rsv_remove(struct uwb_rsv *rsv); +struct uwb_rsv *uwb_rsv_find(struct uwb_rc *rc, struct uwb_dev *src, + struct uwb_ie_drp *drp_ie); +void uwb_rsv_sched_update(struct uwb_rc *rc); + +void uwb_drp_handle_timeout(struct uwb_rsv *rsv); +int uwb_drp_ie_update(struct uwb_rsv *rsv); +void uwb_drp_ie_to_bm(struct uwb_mas_bm *bm, const struct uwb_ie_drp *drp_ie); + +void uwb_drp_avail_init(struct uwb_rc *rc); +int uwb_drp_avail_reserve_pending(struct uwb_rc *rc, struct uwb_mas_bm *mas); +void uwb_drp_avail_reserve(struct uwb_rc *rc, struct uwb_mas_bm *mas); +void uwb_drp_avail_release(struct uwb_rc *rc, struct uwb_mas_bm *mas); +void uwb_drp_avail_ie_update(struct uwb_rc *rc); + +/* -- PAL support */ +void uwb_rc_pal_init(struct uwb_rc *rc); + +/* -- Misc */ + +extern ssize_t uwb_mac_frame_hdr_print(char *, size_t, + const struct uwb_mac_frame_hdr *); + +/* -- Debug interface */ +void uwb_dbg_init(void); +void uwb_dbg_exit(void); +void uwb_dbg_add_rc(struct uwb_rc *rc); +void uwb_dbg_del_rc(struct uwb_rc *rc); + +/* Workarounds for version specific stuff */ + +static inline void uwb_dev_lock(struct uwb_dev *uwb_dev) +{ + down(&uwb_dev->dev.sem); +} + +static inline void uwb_dev_unlock(struct uwb_dev *uwb_dev) +{ + up(&uwb_dev->dev.sem); +} + +#endif /* #ifndef __UWB_INTERNAL_H__ */ diff --git a/drivers/uwb/uwbd.c b/drivers/uwb/uwbd.c new file mode 100644 index 000000000000..78908416e42c --- /dev/null +++ b/drivers/uwb/uwbd.c @@ -0,0 +1,410 @@ +/* + * Ultra Wide Band + * Neighborhood Management Daemon + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * This daemon takes care of maintaing information that describes the + * UWB neighborhood that the radios in this machine can see. It also + * keeps a tab of which devices are visible, makes sure each HC sits + * on a different channel to avoid interfering, etc. + * + * Different drivers (radio controller, device, any API in general) + * communicate with this daemon through an event queue. Daemon wakes + * up, takes a list of events and handles them one by one; handling + * function is extracted from a table based on the event's type and + * subtype. Events are freed only if the handling function says so. + * + * . Lock protecting the event list has to be an spinlock and locked + * with IRQSAVE because it might be called from an interrupt + * context (ie: when events arrive and the notification drops + * down from the ISR). + * + * . UWB radio controller drivers queue events to the daemon using + * uwbd_event_queue(). They just get the event, chew it to make it + * look like UWBD likes it and pass it in a buffer allocated with + * uwb_event_alloc(). + * + * EVENTS + * + * Events have a type, a subtype, a lenght, some other stuff and the + * data blob, which depends on the event. The header is 'struct + * uwb_event'; for payloads, see 'struct uwbd_evt_*'. + * + * EVENT HANDLER TABLES + * + * To find a handling function for an event, the type is used to index + * a subtype-table in the type-table. The subtype-table is indexed + * with the subtype to get the function that handles the event. Start + * with the main type-table 'uwbd_evt_type_handler'. + * + * DEVICES + * + * Devices are created when a bunch of beacons have been received and + * it is stablished that the device has stable radio presence. CREATED + * only, not configured. Devices are ONLY configured when an + * Application-Specific IE Probe is receieved, in which the device + * declares which Protocol ID it groks. Then the device is CONFIGURED + * (and the driver->probe() stuff of the device model is invoked). + * + * Devices are considered disconnected when a certain number of + * beacons are not received in an amount of time. + * + * Handler functions are called normally uwbd_evt_handle_*(). + */ + +#include <linux/kthread.h> +#include <linux/module.h> +#include <linux/freezer.h> +#include "uwb-internal.h" + +#define D_LOCAL 1 +#include <linux/uwb/debug.h> + + +/** + * UWBD Event handler function signature + * + * Return !0 if the event needs not to be freed (ie the handler + * takes/took care of it). 0 means the daemon code will free the + * event. + * + * @evt->rc is already referenced and guaranteed to exist. See + * uwb_evt_handle(). + */ +typedef int (*uwbd_evt_handler_f)(struct uwb_event *); + +/** + * Properties of a UWBD event + * + * @handler: the function that will handle this event + * @name: text name of event + */ +struct uwbd_event { + uwbd_evt_handler_f handler; + const char *name; +}; + +/** Table of handlers for and properties of the UWBD Radio Control Events */ +static +struct uwbd_event uwbd_events[] = { + [UWB_RC_EVT_BEACON] = { + .handler = uwbd_evt_handle_rc_beacon, + .name = "BEACON_RECEIVED" + }, + [UWB_RC_EVT_BEACON_SIZE] = { + .handler = uwbd_evt_handle_rc_beacon_size, + .name = "BEACON_SIZE_CHANGE" + }, + [UWB_RC_EVT_BPOIE_CHANGE] = { + .handler = uwbd_evt_handle_rc_bpoie_change, + .name = "BPOIE_CHANGE" + }, + [UWB_RC_EVT_BP_SLOT_CHANGE] = { + .handler = uwbd_evt_handle_rc_bp_slot_change, + .name = "BP_SLOT_CHANGE" + }, + [UWB_RC_EVT_DRP_AVAIL] = { + .handler = uwbd_evt_handle_rc_drp_avail, + .name = "DRP_AVAILABILITY_CHANGE" + }, + [UWB_RC_EVT_DRP] = { + .handler = uwbd_evt_handle_rc_drp, + .name = "DRP" + }, + [UWB_RC_EVT_DEV_ADDR_CONFLICT] = { + .handler = uwbd_evt_handle_rc_dev_addr_conflict, + .name = "DEV_ADDR_CONFLICT", + }, +}; + + + +struct uwbd_evt_type_handler { + const char *name; + struct uwbd_event *uwbd_events; + size_t size; +}; + +#define UWBD_EVT_TYPE_HANDLER(n,a) { \ + .name = (n), \ + .uwbd_events = (a), \ + .size = sizeof(a)/sizeof((a)[0]) \ +} + + +/** Table of handlers for each UWBD Event type. */ +static +struct uwbd_evt_type_handler uwbd_evt_type_handlers[] = { + [UWB_RC_CET_GENERAL] = UWBD_EVT_TYPE_HANDLER("RC", uwbd_events) +}; + +static const +size_t uwbd_evt_type_handlers_len = + sizeof(uwbd_evt_type_handlers) / sizeof(uwbd_evt_type_handlers[0]); + +static const struct uwbd_event uwbd_message_handlers[] = { + [UWB_EVT_MSG_RESET] = { + .handler = uwbd_msg_handle_reset, + .name = "reset", + }, +}; + +static DEFINE_MUTEX(uwbd_event_mutex); + +/** + * Handle an URC event passed to the UWB Daemon + * + * @evt: the event to handle + * @returns: 0 if the event can be kfreed, !0 on the contrary + * (somebody else took ownership) [coincidentally, returning + * a <0 errno code will free it :)]. + * + * Looks up the two indirection tables (one for the type, one for the + * subtype) to decide which function handles it and then calls the + * handler. + * + * The event structure passed to the event handler has the radio + * controller in @evt->rc referenced. The reference will be dropped + * once the handler returns, so if it needs it for longer (async), + * it'll need to take another one. + */ +static +int uwbd_event_handle_urc(struct uwb_event *evt) +{ + struct uwbd_evt_type_handler *type_table; + uwbd_evt_handler_f handler; + u8 type, context; + u16 event; + + type = evt->notif.rceb->bEventType; + event = le16_to_cpu(evt->notif.rceb->wEvent); + context = evt->notif.rceb->bEventContext; + + if (type > uwbd_evt_type_handlers_len) { + printk(KERN_ERR "UWBD: event type %u: unknown (too high)\n", type); + return -EINVAL; + } + type_table = &uwbd_evt_type_handlers[type]; + if (type_table->uwbd_events == NULL) { + printk(KERN_ERR "UWBD: event type %u: unknown\n", type); + return -EINVAL; + } + if (event > type_table->size) { + printk(KERN_ERR "UWBD: event %s[%u]: unknown (too high)\n", + type_table->name, event); + return -EINVAL; + } + handler = type_table->uwbd_events[event].handler; + if (handler == NULL) { + printk(KERN_ERR "UWBD: event %s[%u]: unknown\n", type_table->name, event); + return -EINVAL; + } + return (*handler)(evt); +} + +static void uwbd_event_handle_message(struct uwb_event *evt) +{ + struct uwb_rc *rc; + int result; + + rc = evt->rc; + + if (evt->message < 0 || evt->message >= ARRAY_SIZE(uwbd_message_handlers)) { + dev_err(&rc->uwb_dev.dev, "UWBD: invalid message type %d\n", evt->message); + return; + } + + /* If this is a reset event we need to drop the + * uwbd_event_mutex or it deadlocks when the reset handler + * attempts to flush the uwbd events. */ + if (evt->message == UWB_EVT_MSG_RESET) + mutex_unlock(&uwbd_event_mutex); + + result = uwbd_message_handlers[evt->message].handler(evt); + if (result < 0) + dev_err(&rc->uwb_dev.dev, "UWBD: '%s' message failed: %d\n", + uwbd_message_handlers[evt->message].name, result); + + if (evt->message == UWB_EVT_MSG_RESET) + mutex_lock(&uwbd_event_mutex); +} + +static void uwbd_event_handle(struct uwb_event *evt) +{ + struct uwb_rc *rc; + int should_keep; + + rc = evt->rc; + + if (rc->ready) { + switch (evt->type) { + case UWB_EVT_TYPE_NOTIF: + should_keep = uwbd_event_handle_urc(evt); + if (should_keep <= 0) + kfree(evt->notif.rceb); + break; + case UWB_EVT_TYPE_MSG: + uwbd_event_handle_message(evt); + break; + default: + dev_err(&rc->uwb_dev.dev, "UWBD: invalid event type %d\n", evt->type); + break; + } + } + + __uwb_rc_put(rc); /* for the __uwb_rc_get() in uwb_rc_notif_cb() */ +} +/* The UWB Daemon */ + + +/** Daemon's PID: used to decide if we can queue or not */ +static int uwbd_pid; +/** Daemon's task struct for managing the kthread */ +static struct task_struct *uwbd_task; +/** Daemon's waitqueue for waiting for new events */ +static DECLARE_WAIT_QUEUE_HEAD(uwbd_wq); +/** Daemon's list of events; we queue/dequeue here */ +static struct list_head uwbd_event_list = LIST_HEAD_INIT(uwbd_event_list); +/** Daemon's list lock to protect concurent access */ +static DEFINE_SPINLOCK(uwbd_event_list_lock); + + +/** + * UWB Daemon + * + * Listens to all UWB notifications and takes care to track the state + * of the UWB neighboorhood for the kernel. When we do a run, we + * spinlock, move the list to a private copy and release the + * lock. Hold it as little as possible. Not a conflict: it is + * guaranteed we own the events in the private list. + * + * FIXME: should change so we don't have a 1HZ timer all the time, but + * only if there are devices. + */ +static int uwbd(void *unused) +{ + unsigned long flags; + struct list_head list = LIST_HEAD_INIT(list); + struct uwb_event *evt, *nxt; + int should_stop = 0; + while (1) { + wait_event_interruptible_timeout( + uwbd_wq, + !list_empty(&uwbd_event_list) + || (should_stop = kthread_should_stop()), + HZ); + if (should_stop) + break; + try_to_freeze(); + + mutex_lock(&uwbd_event_mutex); + spin_lock_irqsave(&uwbd_event_list_lock, flags); + list_splice_init(&uwbd_event_list, &list); + spin_unlock_irqrestore(&uwbd_event_list_lock, flags); + list_for_each_entry_safe(evt, nxt, &list, list_node) { + list_del(&evt->list_node); + uwbd_event_handle(evt); + kfree(evt); + } + mutex_unlock(&uwbd_event_mutex); + + uwb_beca_purge(); /* Purge devices that left */ + } + return 0; +} + + +/** Start the UWB daemon */ +void uwbd_start(void) +{ + uwbd_task = kthread_run(uwbd, NULL, "uwbd"); + if (uwbd_task == NULL) + printk(KERN_ERR "UWB: Cannot start management daemon; " + "UWB won't work\n"); + else + uwbd_pid = uwbd_task->pid; +} + +/* Stop the UWB daemon and free any unprocessed events */ +void uwbd_stop(void) +{ + unsigned long flags; + struct uwb_event *evt, *nxt; + kthread_stop(uwbd_task); + spin_lock_irqsave(&uwbd_event_list_lock, flags); + uwbd_pid = 0; + list_for_each_entry_safe(evt, nxt, &uwbd_event_list, list_node) { + if (evt->type == UWB_EVT_TYPE_NOTIF) + kfree(evt->notif.rceb); + kfree(evt); + } + spin_unlock_irqrestore(&uwbd_event_list_lock, flags); + uwb_beca_release(); +} + +/* + * Queue an event for the management daemon + * + * When some lower layer receives an event, it uses this function to + * push it forward to the UWB daemon. + * + * Once you pass the event, you don't own it any more, but the daemon + * does. It will uwb_event_free() it when done, so make sure you + * uwb_event_alloc()ed it or bad things will happen. + * + * If the daemon is not running, we just free the event. + */ +void uwbd_event_queue(struct uwb_event *evt) +{ + unsigned long flags; + spin_lock_irqsave(&uwbd_event_list_lock, flags); + if (uwbd_pid != 0) { + list_add(&evt->list_node, &uwbd_event_list); + wake_up_all(&uwbd_wq); + } else { + __uwb_rc_put(evt->rc); + if (evt->type == UWB_EVT_TYPE_NOTIF) + kfree(evt->notif.rceb); + kfree(evt); + } + spin_unlock_irqrestore(&uwbd_event_list_lock, flags); + return; +} + +void uwbd_flush(struct uwb_rc *rc) +{ + struct uwb_event *evt, *nxt; + + mutex_lock(&uwbd_event_mutex); + + spin_lock_irq(&uwbd_event_list_lock); + list_for_each_entry_safe(evt, nxt, &uwbd_event_list, list_node) { + if (evt->rc == rc) { + __uwb_rc_put(rc); + list_del(&evt->list_node); + if (evt->type == UWB_EVT_TYPE_NOTIF) + kfree(evt->notif.rceb); + kfree(evt); + } + } + spin_unlock_irq(&uwbd_event_list_lock); + + mutex_unlock(&uwbd_event_mutex); +} diff --git a/drivers/uwb/whc-rc.c b/drivers/uwb/whc-rc.c new file mode 100644 index 000000000000..1711deadb114 --- /dev/null +++ b/drivers/uwb/whc-rc.c @@ -0,0 +1,520 @@ +/* + * Wireless Host Controller: Radio Control Interface (WHCI v0.95[2.3]) + * Radio Control command/event transport to the UWB stack + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Initialize and hook up the Radio Control interface. + * + * For each device probed, creates an 'struct whcrc' which contains + * just the representation of the UWB Radio Controller, and the logic + * for reading notifications and passing them to the UWB Core. + * + * So we initialize all of those, register the UWB Radio Controller + * and setup the notification/event handle to pipe the notifications + * to the UWB management Daemon. + * + * Once uwb_rc_add() is called, the UWB stack takes control, resets + * the radio and readies the device to take commands the UWB + * API/user-space. + * + * Note this driver is just a transport driver; the commands are + * formed at the UWB stack and given to this driver who will deliver + * them to the hw and transfer the replies/notifications back to the + * UWB stack through the UWB daemon (UWBD). + */ +#include <linux/version.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/interrupt.h> +#include <linux/workqueue.h> +#include <linux/uwb.h> +#include <linux/uwb/whci.h> +#include <linux/uwb/umc.h> +#include "uwb-internal.h" + +#define D_LOCAL 0 +#include <linux/uwb/debug.h> + +/** + * Descriptor for an instance of the UWB Radio Control Driver that + * attaches to the URC interface of the WHCI PCI card. + * + * Unless there is a lock specific to the 'data members', all access + * is protected by uwb_rc->mutex. + */ +struct whcrc { + struct umc_dev *umc_dev; + struct uwb_rc *uwb_rc; /* UWB host controller */ + + unsigned long area; + void __iomem *rc_base; + size_t rc_len; + spinlock_t irq_lock; + + void *evt_buf, *cmd_buf; + dma_addr_t evt_dma_buf, cmd_dma_buf; + wait_queue_head_t cmd_wq; + struct work_struct event_work; +}; + +/** + * Execute an UWB RC command on WHCI/RC + * + * @rc: Instance of a Radio Controller that is a whcrc + * @cmd: Buffer containing the RCCB and payload to execute + * @cmd_size: Size of the command buffer. + * + * We copy the command into whcrc->cmd_buf (as it is pretty and + * aligned`and physically contiguous) and then press the right keys in + * the controller's URCCMD register to get it to read it. We might + * have to wait for the cmd_sem to be open to us. + * + * NOTE: rc's mutex has to be locked + */ +static int whcrc_cmd(struct uwb_rc *uwb_rc, + const struct uwb_rccb *cmd, size_t cmd_size) +{ + int result = 0; + struct whcrc *whcrc = uwb_rc->priv; + struct device *dev = &whcrc->umc_dev->dev; + u32 urccmd; + + d_fnstart(3, dev, "(%p, %p, %zu)\n", uwb_rc, cmd, cmd_size); + might_sleep(); + + if (cmd_size >= 4096) { + result = -E2BIG; + goto error; + } + + /* + * If the URC is halted, then the hardware has reset itself. + * Attempt to recover by restarting the device and then return + * an error as it's likely that the current command isn't + * valid for a newly started RC. + */ + if (le_readl(whcrc->rc_base + URCSTS) & URCSTS_HALTED) { + dev_err(dev, "requesting reset of halted radio controller\n"); + uwb_rc_reset_all(uwb_rc); + result = -EIO; + goto error; + } + + result = wait_event_timeout(whcrc->cmd_wq, + !(le_readl(whcrc->rc_base + URCCMD) & URCCMD_ACTIVE), HZ/2); + if (result == 0) { + dev_err(dev, "device is not ready to execute commands\n"); + result = -ETIMEDOUT; + goto error; + } + + memmove(whcrc->cmd_buf, cmd, cmd_size); + le_writeq(whcrc->cmd_dma_buf, whcrc->rc_base + URCCMDADDR); + + spin_lock(&whcrc->irq_lock); + urccmd = le_readl(whcrc->rc_base + URCCMD); + urccmd &= ~(URCCMD_EARV | URCCMD_SIZE_MASK); + le_writel(urccmd | URCCMD_ACTIVE | URCCMD_IWR | cmd_size, + whcrc->rc_base + URCCMD); + spin_unlock(&whcrc->irq_lock); + +error: + d_fnend(3, dev, "(%p, %p, %zu) = %d\n", + uwb_rc, cmd, cmd_size, result); + return result; +} + +static int whcrc_reset(struct uwb_rc *rc) +{ + struct whcrc *whcrc = rc->priv; + + return umc_controller_reset(whcrc->umc_dev); +} + +/** + * Reset event reception mechanism and tell hw we are ready to get more + * + * We have read all the events in the event buffer, so we are ready to + * reset it to the beginning. + * + * This is only called during initialization or after an event buffer + * has been retired. This means we can be sure that event processing + * is disabled and it's safe to update the URCEVTADDR register. + * + * There's no need to wait for the event processing to start as the + * URC will not clear URCCMD_ACTIVE until (internal) event buffer + * space is available. + */ +static +void whcrc_enable_events(struct whcrc *whcrc) +{ + struct device *dev = &whcrc->umc_dev->dev; + u32 urccmd; + + d_fnstart(4, dev, "(whcrc %p)\n", whcrc); + + le_writeq(whcrc->evt_dma_buf, whcrc->rc_base + URCEVTADDR); + + spin_lock(&whcrc->irq_lock); + urccmd = le_readl(whcrc->rc_base + URCCMD) & ~URCCMD_ACTIVE; + le_writel(urccmd | URCCMD_EARV, whcrc->rc_base + URCCMD); + spin_unlock(&whcrc->irq_lock); + + d_fnend(4, dev, "(whcrc %p) = void\n", whcrc); +} + +static void whcrc_event_work(struct work_struct *work) +{ + struct whcrc *whcrc = container_of(work, struct whcrc, event_work); + struct device *dev = &whcrc->umc_dev->dev; + size_t size; + u64 urcevtaddr; + + urcevtaddr = le_readq(whcrc->rc_base + URCEVTADDR); + size = urcevtaddr & URCEVTADDR_OFFSET_MASK; + + d_printf(3, dev, "received %zu octet event\n", size); + d_dump(4, dev, whcrc->evt_buf, size > 32 ? 32 : size); + + uwb_rc_neh_grok(whcrc->uwb_rc, whcrc->evt_buf, size); + whcrc_enable_events(whcrc); +} + +/** + * Catch interrupts? + * + * We ack inmediately (and expect the hw to do the right thing and + * raise another IRQ if things have changed :) + */ +static +irqreturn_t whcrc_irq_cb(int irq, void *_whcrc) +{ + struct whcrc *whcrc = _whcrc; + struct device *dev = &whcrc->umc_dev->dev; + u32 urcsts; + + urcsts = le_readl(whcrc->rc_base + URCSTS); + if (!(urcsts & URCSTS_INT_MASK)) + return IRQ_NONE; + le_writel(urcsts & URCSTS_INT_MASK, whcrc->rc_base + URCSTS); + + d_printf(4, dev, "acked 0x%08x, urcsts 0x%08x\n", + le_readl(whcrc->rc_base + URCSTS), urcsts); + + if (urcsts & URCSTS_HSE) { + dev_err(dev, "host system error -- hardware halted\n"); + /* FIXME: do something sensible here */ + goto out; + } + if (urcsts & URCSTS_ER) { + d_printf(3, dev, "ER: event ready\n"); + schedule_work(&whcrc->event_work); + } + if (urcsts & URCSTS_RCI) { + d_printf(3, dev, "RCI: ready to execute another command\n"); + wake_up_all(&whcrc->cmd_wq); + } +out: + return IRQ_HANDLED; +} + + +/** + * Initialize a UMC RC interface: map regions, get (shared) IRQ + */ +static +int whcrc_setup_rc_umc(struct whcrc *whcrc) +{ + int result = 0; + struct device *dev = &whcrc->umc_dev->dev; + struct umc_dev *umc_dev = whcrc->umc_dev; + + whcrc->area = umc_dev->resource.start; + whcrc->rc_len = umc_dev->resource.end - umc_dev->resource.start + 1; + result = -EBUSY; + if (request_mem_region(whcrc->area, whcrc->rc_len, KBUILD_MODNAME) + == NULL) { + dev_err(dev, "can't request URC region (%zu bytes @ 0x%lx): %d\n", + whcrc->rc_len, whcrc->area, result); + goto error_request_region; + } + + whcrc->rc_base = ioremap_nocache(whcrc->area, whcrc->rc_len); + if (whcrc->rc_base == NULL) { + dev_err(dev, "can't ioremap registers (%zu bytes @ 0x%lx): %d\n", + whcrc->rc_len, whcrc->area, result); + goto error_ioremap_nocache; + } + + result = request_irq(umc_dev->irq, whcrc_irq_cb, IRQF_SHARED, + KBUILD_MODNAME, whcrc); + if (result < 0) { + dev_err(dev, "can't allocate IRQ %d: %d\n", + umc_dev->irq, result); + goto error_request_irq; + } + + result = -ENOMEM; + whcrc->cmd_buf = dma_alloc_coherent(&umc_dev->dev, PAGE_SIZE, + &whcrc->cmd_dma_buf, GFP_KERNEL); + if (whcrc->cmd_buf == NULL) { + dev_err(dev, "Can't allocate cmd transfer buffer\n"); + goto error_cmd_buffer; + } + + whcrc->evt_buf = dma_alloc_coherent(&umc_dev->dev, PAGE_SIZE, + &whcrc->evt_dma_buf, GFP_KERNEL); + if (whcrc->evt_buf == NULL) { + dev_err(dev, "Can't allocate evt transfer buffer\n"); + goto error_evt_buffer; + } + d_printf(3, dev, "UWB RC Interface: %zu bytes at 0x%p, irq %u\n", + whcrc->rc_len, whcrc->rc_base, umc_dev->irq); + return 0; + +error_evt_buffer: + dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->cmd_buf, + whcrc->cmd_dma_buf); +error_cmd_buffer: + free_irq(umc_dev->irq, whcrc); +error_request_irq: + iounmap(whcrc->rc_base); +error_ioremap_nocache: + release_mem_region(whcrc->area, whcrc->rc_len); +error_request_region: + return result; +} + + +/** + * Release RC's UMC resources + */ +static +void whcrc_release_rc_umc(struct whcrc *whcrc) +{ + struct umc_dev *umc_dev = whcrc->umc_dev; + + dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->evt_buf, + whcrc->evt_dma_buf); + dma_free_coherent(&umc_dev->dev, PAGE_SIZE, whcrc->cmd_buf, + whcrc->cmd_dma_buf); + free_irq(umc_dev->irq, whcrc); + iounmap(whcrc->rc_base); + release_mem_region(whcrc->area, whcrc->rc_len); +} + + +/** + * whcrc_start_rc - start a WHCI radio controller + * @whcrc: the radio controller to start + * + * Reset the UMC device, start the radio controller, enable events and + * finally enable interrupts. + */ +static int whcrc_start_rc(struct uwb_rc *rc) +{ + struct whcrc *whcrc = rc->priv; + int result = 0; + struct device *dev = &whcrc->umc_dev->dev; + unsigned long start, duration; + + /* Reset the thing */ + le_writel(URCCMD_RESET, whcrc->rc_base + URCCMD); + if (d_test(3)) + start = jiffies; + if (whci_wait_for(dev, whcrc->rc_base + URCCMD, URCCMD_RESET, 0, + 5000, "device to reset at init") < 0) { + result = -EBUSY; + goto error; + } else if (d_test(3)) { + duration = jiffies - start; + if (duration > msecs_to_jiffies(40)) + dev_err(dev, "Device took %ums to " + "reset. MAX expected: 40ms\n", + jiffies_to_msecs(duration)); + } + + /* Set the event buffer, start the controller (enable IRQs later) */ + le_writel(0, whcrc->rc_base + URCINTR); + le_writel(URCCMD_RS, whcrc->rc_base + URCCMD); + result = -ETIMEDOUT; + if (d_test(3)) + start = jiffies; + if (whci_wait_for(dev, whcrc->rc_base + URCSTS, URCSTS_HALTED, 0, + 5000, "device to start") < 0) + goto error; + if (d_test(3)) { + duration = jiffies - start; + if (duration > msecs_to_jiffies(40)) + dev_err(dev, "Device took %ums to start. " + "MAX expected: 40ms\n", + jiffies_to_msecs(duration)); + } + whcrc_enable_events(whcrc); + result = 0; + le_writel(URCINTR_EN_ALL, whcrc->rc_base + URCINTR); +error: + return result; +} + + +/** + * whcrc_stop_rc - stop a WHCI radio controller + * @whcrc: the radio controller to stop + * + * Disable interrupts and cancel any pending event processing work + * before clearing the Run/Stop bit. + */ +static +void whcrc_stop_rc(struct uwb_rc *rc) +{ + struct whcrc *whcrc = rc->priv; + struct umc_dev *umc_dev = whcrc->umc_dev; + + le_writel(0, whcrc->rc_base + URCINTR); + cancel_work_sync(&whcrc->event_work); + + le_writel(0, whcrc->rc_base + URCCMD); + whci_wait_for(&umc_dev->dev, whcrc->rc_base + URCSTS, + URCSTS_HALTED, 0, 40, "URCSTS.HALTED"); +} + +static void whcrc_init(struct whcrc *whcrc) +{ + spin_lock_init(&whcrc->irq_lock); + init_waitqueue_head(&whcrc->cmd_wq); + INIT_WORK(&whcrc->event_work, whcrc_event_work); +} + +/** + * Initialize the radio controller. + * + * NOTE: we setup whcrc->uwb_rc before calling uwb_rc_add(); in the + * IRQ handler we use that to determine if the hw is ready to + * handle events. Looks like a race condition, but it really is + * not. + */ +static +int whcrc_probe(struct umc_dev *umc_dev) +{ + int result; + struct uwb_rc *uwb_rc; + struct whcrc *whcrc; + struct device *dev = &umc_dev->dev; + + d_fnstart(3, dev, "(umc_dev %p)\n", umc_dev); + result = -ENOMEM; + uwb_rc = uwb_rc_alloc(); + if (uwb_rc == NULL) { + dev_err(dev, "unable to allocate RC instance\n"); + goto error_rc_alloc; + } + whcrc = kzalloc(sizeof(*whcrc), GFP_KERNEL); + if (whcrc == NULL) { + dev_err(dev, "unable to allocate WHC-RC instance\n"); + goto error_alloc; + } + whcrc_init(whcrc); + whcrc->umc_dev = umc_dev; + + result = whcrc_setup_rc_umc(whcrc); + if (result < 0) { + dev_err(dev, "Can't setup RC UMC interface: %d\n", result); + goto error_setup_rc_umc; + } + whcrc->uwb_rc = uwb_rc; + + uwb_rc->owner = THIS_MODULE; + uwb_rc->cmd = whcrc_cmd; + uwb_rc->reset = whcrc_reset; + uwb_rc->start = whcrc_start_rc; + uwb_rc->stop = whcrc_stop_rc; + + result = uwb_rc_add(uwb_rc, dev, whcrc); + if (result < 0) + goto error_rc_add; + umc_set_drvdata(umc_dev, whcrc); + d_fnend(3, dev, "(umc_dev %p) = 0\n", umc_dev); + return 0; + +error_rc_add: + whcrc_release_rc_umc(whcrc); +error_setup_rc_umc: + kfree(whcrc); +error_alloc: + uwb_rc_put(uwb_rc); +error_rc_alloc: + d_fnend(3, dev, "(umc_dev %p) = %d\n", umc_dev, result); + return result; +} + +/** + * Clean up the radio control resources + * + * When we up the command semaphore, everybody possibly held trying to + * execute a command should be granted entry and then they'll see the + * host is quiescing and up it (so it will chain to the next waiter). + * This should not happen (in any case), as we can only remove when + * there are no handles open... + */ +static void whcrc_remove(struct umc_dev *umc_dev) +{ + struct whcrc *whcrc = umc_get_drvdata(umc_dev); + struct uwb_rc *uwb_rc = whcrc->uwb_rc; + + umc_set_drvdata(umc_dev, NULL); + uwb_rc_rm(uwb_rc); + whcrc_release_rc_umc(whcrc); + kfree(whcrc); + uwb_rc_put(uwb_rc); + d_printf(1, &umc_dev->dev, "freed whcrc %p\n", whcrc); +} + +/* PCI device ID's that we handle [so it gets loaded] */ +static struct pci_device_id whcrc_id_table[] = { + { PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) }, + { /* empty last entry */ } +}; +MODULE_DEVICE_TABLE(pci, whcrc_id_table); + +static struct umc_driver whcrc_driver = { + .name = "whc-rc", + .cap_id = UMC_CAP_ID_WHCI_RC, + .probe = whcrc_probe, + .remove = whcrc_remove, +}; + +static int __init whcrc_driver_init(void) +{ + return umc_driver_register(&whcrc_driver); +} +module_init(whcrc_driver_init); + +static void __exit whcrc_driver_exit(void) +{ + umc_driver_unregister(&whcrc_driver); +} +module_exit(whcrc_driver_exit); + +MODULE_AUTHOR("Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>"); +MODULE_DESCRIPTION("Wireless Host Controller Radio Control Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/uwb/whci.c b/drivers/uwb/whci.c new file mode 100644 index 000000000000..3df2388f908f --- /dev/null +++ b/drivers/uwb/whci.c @@ -0,0 +1,269 @@ +/* + * WHCI UWB Multi-interface Controller enumerator. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This file is released under the GNU GPL v2. + */ +#include <linux/delay.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> +#include <linux/uwb/whci.h> +#include <linux/uwb/umc.h> + +struct whci_card { + struct pci_dev *pci; + void __iomem *uwbbase; + u8 n_caps; + struct umc_dev *devs[0]; +}; + + +/* Fix faulty HW :( */ +static +u64 whci_capdata_quirks(struct whci_card *card, u64 capdata) +{ + u64 capdata_orig = capdata; + struct pci_dev *pci_dev = card->pci; + if (pci_dev->vendor == PCI_VENDOR_ID_INTEL + && (pci_dev->device == 0x0c3b || pci_dev->device == 0004) + && pci_dev->class == 0x0d1010) { + switch (UWBCAPDATA_TO_CAP_ID(capdata)) { + /* WLP capability has 0x100 bytes of aperture */ + case 0x80: + capdata |= 0x40 << 8; break; + /* WUSB capability has 0x80 bytes of aperture + * and ID is 1 */ + case 0x02: + capdata &= ~0xffff; + capdata |= 0x2001; + break; + } + } + if (capdata_orig != capdata) + dev_warn(&pci_dev->dev, + "PCI v%04x d%04x c%06x#%02x: " + "corrected capdata from %016Lx to %016Lx\n", + pci_dev->vendor, pci_dev->device, pci_dev->class, + (unsigned)UWBCAPDATA_TO_CAP_ID(capdata), + (unsigned long long)capdata_orig, + (unsigned long long)capdata); + return capdata; +} + + +/** + * whci_wait_for - wait for a WHCI register to be set + * + * Polls (for at most @max_ms ms) until '*@reg & @mask == @result'. + */ +int whci_wait_for(struct device *dev, u32 __iomem *reg, u32 mask, u32 result, + unsigned long max_ms, const char *tag) +{ + unsigned t = 0; + u32 val; + for (;;) { + val = le_readl(reg); + if ((val & mask) == result) + break; + msleep(10); + if (t >= max_ms) { + dev_err(dev, "timed out waiting for %s ", tag); + return -ETIMEDOUT; + } + t += 10; + } + return 0; +} +EXPORT_SYMBOL_GPL(whci_wait_for); + + +/* + * NOTE: the capinfo and capdata registers are slightly different + * (size and cap-id fields). So for cap #0, we need to fill + * in. Size comes from the size of the register block + * (statically calculated); cap_id comes from nowhere, we use + * zero, that is reserved, for the radio controller, because + * none was defined at the spec level. + */ +static int whci_add_cap(struct whci_card *card, int n) +{ + struct umc_dev *umc; + u64 capdata; + int bar, err; + + umc = umc_device_create(&card->pci->dev, n); + if (umc == NULL) + return -ENOMEM; + + capdata = le_readq(card->uwbbase + UWBCAPDATA(n)); + + bar = UWBCAPDATA_TO_BAR(capdata) << 1; + + capdata = whci_capdata_quirks(card, capdata); + /* Capability 0 is the radio controller. It's size is 32 + * bytes (WHCI0.95[2.3, T2-9]). */ + umc->version = UWBCAPDATA_TO_VERSION(capdata); + umc->cap_id = n == 0 ? 0 : UWBCAPDATA_TO_CAP_ID(capdata); + umc->bar = bar; + umc->resource.start = pci_resource_start(card->pci, bar) + + UWBCAPDATA_TO_OFFSET(capdata); + umc->resource.end = umc->resource.start + + (n == 0 ? 0x20 : UWBCAPDATA_TO_SIZE(capdata)) - 1; + umc->resource.name = umc->dev.bus_id; + umc->resource.flags = card->pci->resource[bar].flags; + umc->resource.parent = &card->pci->resource[bar]; + umc->irq = card->pci->irq; + + err = umc_device_register(umc); + if (err < 0) + goto error; + card->devs[n] = umc; + return 0; + +error: + kfree(umc); + return err; +} + +static void whci_del_cap(struct whci_card *card, int n) +{ + struct umc_dev *umc = card->devs[n]; + + if (umc != NULL) + umc_device_unregister(umc); +} + +static int whci_n_caps(struct pci_dev *pci) +{ + void __iomem *uwbbase; + u64 capinfo; + + uwbbase = pci_iomap(pci, 0, 8); + if (!uwbbase) + return -ENOMEM; + capinfo = le_readq(uwbbase + UWBCAPINFO); + pci_iounmap(pci, uwbbase); + + return UWBCAPINFO_TO_N_CAPS(capinfo); +} + +static int whci_probe(struct pci_dev *pci, const struct pci_device_id *id) +{ + struct whci_card *card; + int err, n_caps, n; + + err = pci_enable_device(pci); + if (err < 0) + goto error; + pci_enable_msi(pci); + pci_set_master(pci); + err = -ENXIO; + if (!pci_set_dma_mask(pci, DMA_64BIT_MASK)) + pci_set_consistent_dma_mask(pci, DMA_64BIT_MASK); + else if (!pci_set_dma_mask(pci, DMA_32BIT_MASK)) + pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK); + else + goto error_dma; + + err = n_caps = whci_n_caps(pci); + if (n_caps < 0) + goto error_ncaps; + + err = -ENOMEM; + card = kzalloc(sizeof(struct whci_card) + + sizeof(struct whci_dev *) * (n_caps + 1), + GFP_KERNEL); + if (card == NULL) + goto error_kzalloc; + card->pci = pci; + card->n_caps = n_caps; + + err = -EBUSY; + if (!request_mem_region(pci_resource_start(pci, 0), + UWBCAPDATA_SIZE(card->n_caps), + "whci (capability data)")) + goto error_request_memregion; + err = -ENOMEM; + card->uwbbase = pci_iomap(pci, 0, UWBCAPDATA_SIZE(card->n_caps)); + if (!card->uwbbase) + goto error_iomap; + + /* Add each capability. */ + for (n = 0; n <= card->n_caps; n++) { + err = whci_add_cap(card, n); + if (err < 0 && n == 0) { + dev_err(&pci->dev, "cannot bind UWB radio controller:" + " %d\n", err); + goto error_bind; + } + if (err < 0) + dev_warn(&pci->dev, "warning: cannot bind capability " + "#%u: %d\n", n, err); + } + pci_set_drvdata(pci, card); + return 0; + +error_bind: + pci_iounmap(pci, card->uwbbase); +error_iomap: + release_mem_region(pci_resource_start(pci, 0), UWBCAPDATA_SIZE(card->n_caps)); +error_request_memregion: + kfree(card); +error_kzalloc: +error_ncaps: +error_dma: + pci_disable_msi(pci); + pci_disable_device(pci); +error: + return err; +} + +static void whci_remove(struct pci_dev *pci) +{ + struct whci_card *card = pci_get_drvdata(pci); + int n; + + pci_set_drvdata(pci, NULL); + /* Unregister each capability in reverse (so the master device + * is unregistered last). */ + for (n = card->n_caps; n >= 0 ; n--) + whci_del_cap(card, n); + pci_iounmap(pci, card->uwbbase); + release_mem_region(pci_resource_start(pci, 0), UWBCAPDATA_SIZE(card->n_caps)); + kfree(card); + pci_disable_msi(pci); + pci_disable_device(pci); +} + +static struct pci_device_id whci_id_table[] = { + { PCI_DEVICE_CLASS(PCI_CLASS_WIRELESS_WHCI, ~0) }, + { 0 }, +}; +MODULE_DEVICE_TABLE(pci, whci_id_table); + + +static struct pci_driver whci_driver = { + .name = "whci", + .id_table = whci_id_table, + .probe = whci_probe, + .remove = whci_remove, +}; + +static int __init whci_init(void) +{ + return pci_register_driver(&whci_driver); +} + +static void __exit whci_exit(void) +{ + pci_unregister_driver(&whci_driver); +} + +module_init(whci_init); +module_exit(whci_exit); + +MODULE_DESCRIPTION("WHCI UWB Multi-interface Controller enumerator"); +MODULE_AUTHOR("Cambridge Silicon Radio Ltd."); +MODULE_LICENSE("GPL"); diff --git a/drivers/uwb/wlp/Makefile b/drivers/uwb/wlp/Makefile new file mode 100644 index 000000000000..c72c11db5b1b --- /dev/null +++ b/drivers/uwb/wlp/Makefile @@ -0,0 +1,10 @@ +obj-$(CONFIG_UWB_WLP) := wlp.o + +wlp-objs := \ + driver.o \ + eda.o \ + messages.o \ + sysfs.o \ + txrx.o \ + wlp-lc.o \ + wss-lc.o diff --git a/drivers/uwb/wlp/driver.c b/drivers/uwb/wlp/driver.c new file mode 100644 index 000000000000..cb8d699b6a67 --- /dev/null +++ b/drivers/uwb/wlp/driver.c @@ -0,0 +1,43 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * + * Copyright (C) 2007 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Life cycle of WLP substack + * + * FIXME: Docs + */ + +#include <linux/module.h> + +static int __init wlp_subsys_init(void) +{ + return 0; +} +module_init(wlp_subsys_init); + +static void __exit wlp_subsys_exit(void) +{ + return; +} +module_exit(wlp_subsys_exit); + +MODULE_AUTHOR("Reinette Chatre <reinette.chatre@intel.com>"); +MODULE_DESCRIPTION("WiMedia Logical Link Control Protocol (WLP)"); +MODULE_LICENSE("GPL"); diff --git a/drivers/uwb/wlp/eda.c b/drivers/uwb/wlp/eda.c new file mode 100644 index 000000000000..cdfe8dfc4340 --- /dev/null +++ b/drivers/uwb/wlp/eda.c @@ -0,0 +1,449 @@ +/* + * WUSB Wire Adapter: WLP interface + * Ethernet to device address cache + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * We need to be able to map ethernet addresses to device addresses + * and back because there is not explicit relationship between the eth + * addresses used in the ETH frames and the device addresses (no, it + * would not have been simpler to force as ETH address the MBOA MAC + * address...no, not at all :). + * + * A device has one MBOA MAC address and one device address. It is possible + * for a device to have more than one virtual MAC address (although a + * virtual address can be the same as the MBOA MAC address). The device + * address is guaranteed to be unique among the devices in the extended + * beacon group (see ECMA 17.1.1). We thus use the device address as index + * to this cache. We do allow searching based on virtual address as this + * is how Ethernet frames will be addressed. + * + * We need to support virtual EUI-48. Although, right now the virtual + * EUI-48 will always be the same as the MAC SAP address. The EDA cache + * entry thus contains a MAC SAP address as well as the virtual address + * (used to map the network stack address to a neighbor). When we move + * to support more than one virtual MAC on a host then this organization + * will have to change. Perhaps a neighbor has a list of WSSs, each with a + * tag and virtual EUI-48. + * + * On data transmission + * it is used to determine if the neighbor is connected and what WSS it + * belongs to. With this we know what tag to add to the WLP frame. Storing + * the WSS in the EDA cache may be overkill because we only support one + * WSS. Hopefully we will support more than one WSS at some point. + * On data reception it is used to determine the WSS based on + * the tag and address of the transmitting neighbor. + */ + +#define D_LOCAL 5 +#include <linux/netdevice.h> +#include <linux/uwb/debug.h> +#include <linux/etherdevice.h> +#include <linux/wlp.h> +#include "wlp-internal.h" + + +/* FIXME: cache is not purged, only on device close */ + +/* FIXME: does not scale, change to dynamic array */ + +/* + * Initialize the EDA cache + * + * @returns 0 if ok, < 0 errno code on error + * + * Call when the interface is being brought up + * + * NOTE: Keep it as a separate function as the implementation will + * change and be more complex. + */ +void wlp_eda_init(struct wlp_eda *eda) +{ + INIT_LIST_HEAD(&eda->cache); + spin_lock_init(&eda->lock); +} + +/* + * Release the EDA cache + * + * @returns 0 if ok, < 0 errno code on error + * + * Called when the interface is brought down + */ +void wlp_eda_release(struct wlp_eda *eda) +{ + unsigned long flags; + struct wlp_eda_node *itr, *next; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry_safe(itr, next, &eda->cache, list_node) { + list_del(&itr->list_node); + kfree(itr); + } + spin_unlock_irqrestore(&eda->lock, flags); +} + +/* + * Add an address mapping + * + * @returns 0 if ok, < 0 errno code on error + * + * An address mapping is initially created when the neighbor device is seen + * for the first time (it is "onair"). At this time the neighbor is not + * connected or associated with a WSS so we only populate the Ethernet and + * Device address fields. + * + */ +int wlp_eda_create_node(struct wlp_eda *eda, + const unsigned char eth_addr[ETH_ALEN], + const struct uwb_dev_addr *dev_addr) +{ + int result = 0; + struct wlp_eda_node *itr; + unsigned long flags; + + BUG_ON(dev_addr == NULL || eth_addr == NULL); + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(itr, &eda->cache, list_node) { + if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { + printk(KERN_ERR "EDA cache already contains entry " + "for neighbor %02x:%02x\n", + dev_addr->data[1], dev_addr->data[0]); + result = -EEXIST; + goto out_unlock; + } + } + itr = kzalloc(sizeof(*itr), GFP_ATOMIC); + if (itr != NULL) { + memcpy(itr->eth_addr, eth_addr, sizeof(itr->eth_addr)); + itr->dev_addr = *dev_addr; + list_add(&itr->list_node, &eda->cache); + } else + result = -ENOMEM; +out_unlock: + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +/* + * Remove entry from EDA cache + * + * This is done when the device goes off air. + */ +void wlp_eda_rm_node(struct wlp_eda *eda, const struct uwb_dev_addr *dev_addr) +{ + struct wlp_eda_node *itr, *next; + unsigned long flags; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry_safe(itr, next, &eda->cache, list_node) { + if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { + list_del(&itr->list_node); + kfree(itr); + break; + } + } + spin_unlock_irqrestore(&eda->lock, flags); +} + +/* + * Update an address mapping + * + * @returns 0 if ok, < 0 errno code on error + */ +int wlp_eda_update_node(struct wlp_eda *eda, + const struct uwb_dev_addr *dev_addr, + struct wlp_wss *wss, + const unsigned char virt_addr[ETH_ALEN], + const u8 tag, const enum wlp_wss_connect state) +{ + int result = -ENOENT; + struct wlp_eda_node *itr; + unsigned long flags; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(itr, &eda->cache, list_node) { + if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { + /* Found it, update it */ + itr->wss = wss; + memcpy(itr->virt_addr, virt_addr, + sizeof(itr->virt_addr)); + itr->tag = tag; + itr->state = state; + result = 0; + goto out_unlock; + } + } + /* Not found */ +out_unlock: + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +/* + * Update only state field of an address mapping + * + * @returns 0 if ok, < 0 errno code on error + */ +int wlp_eda_update_node_state(struct wlp_eda *eda, + const struct uwb_dev_addr *dev_addr, + const enum wlp_wss_connect state) +{ + int result = -ENOENT; + struct wlp_eda_node *itr; + unsigned long flags; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(itr, &eda->cache, list_node) { + if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { + /* Found it, update it */ + itr->state = state; + result = 0; + goto out_unlock; + } + } + /* Not found */ +out_unlock: + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +/* + * Return contents of EDA cache entry + * + * @dev_addr: index to EDA cache + * @eda_entry: pointer to where contents of EDA cache will be copied + */ +int wlp_copy_eda_node(struct wlp_eda *eda, struct uwb_dev_addr *dev_addr, + struct wlp_eda_node *eda_entry) +{ + int result = -ENOENT; + struct wlp_eda_node *itr; + unsigned long flags; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(itr, &eda->cache, list_node) { + if (!memcmp(&itr->dev_addr, dev_addr, sizeof(itr->dev_addr))) { + *eda_entry = *itr; + result = 0; + goto out_unlock; + } + } + /* Not found */ +out_unlock: + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +/* + * Execute function for every element in the cache + * + * @function: function to execute on element of cache (must be atomic) + * @priv: private data of function + * @returns: result of first function that failed, or last function + * executed if no function failed. + * + * Stop executing when function returns error for any element in cache. + * + * IMPORTANT: We are using a spinlock here: the function executed on each + * element has to be atomic. + */ +int wlp_eda_for_each(struct wlp_eda *eda, wlp_eda_for_each_f function, + void *priv) +{ + int result = 0; + struct wlp *wlp = container_of(eda, struct wlp, eda); + struct wlp_eda_node *entry; + unsigned long flags; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(entry, &eda->cache, list_node) { + result = (*function)(wlp, entry, priv); + if (result < 0) + break; + } + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +/* + * Execute function for single element in the cache (return dev addr) + * + * @virt_addr: index into EDA cache used to determine which element to + * execute the function on + * @dev_addr: device address of element in cache will be returned using + * @dev_addr + * @function: function to execute on element of cache (must be atomic) + * @priv: private data of function + * @returns: result of function + * + * IMPORTANT: We are using a spinlock here: the function executed on the + * element has to be atomic. + */ +int wlp_eda_for_virtual(struct wlp_eda *eda, + const unsigned char virt_addr[ETH_ALEN], + struct uwb_dev_addr *dev_addr, + wlp_eda_for_each_f function, + void *priv) +{ + int result = 0; + struct wlp *wlp = container_of(eda, struct wlp, eda); + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_eda_node *itr; + unsigned long flags; + int found = 0; + + spin_lock_irqsave(&eda->lock, flags); + list_for_each_entry(itr, &eda->cache, list_node) { + if (!memcmp(itr->virt_addr, virt_addr, + sizeof(itr->virt_addr))) { + d_printf(6, dev, "EDA: looking for " + "%02x:%02x:%02x:%02x:%02x:%02x hit %02x:%02x " + "wss %p tag 0x%02x state %u\n", + virt_addr[0], virt_addr[1], + virt_addr[2], virt_addr[3], + virt_addr[4], virt_addr[5], + itr->dev_addr.data[1], + itr->dev_addr.data[0], itr->wss, + itr->tag, itr->state); + result = (*function)(wlp, itr, priv); + *dev_addr = itr->dev_addr; + found = 1; + break; + } else + d_printf(6, dev, "EDA: looking for " + "%02x:%02x:%02x:%02x:%02x:%02x " + "against " + "%02x:%02x:%02x:%02x:%02x:%02x miss\n", + virt_addr[0], virt_addr[1], + virt_addr[2], virt_addr[3], + virt_addr[4], virt_addr[5], + itr->virt_addr[0], itr->virt_addr[1], + itr->virt_addr[2], itr->virt_addr[3], + itr->virt_addr[4], itr->virt_addr[5]); + } + if (!found) { + if (printk_ratelimit()) + dev_err(dev, "EDA: Eth addr %02x:%02x:%02x" + ":%02x:%02x:%02x not found.\n", + virt_addr[0], virt_addr[1], + virt_addr[2], virt_addr[3], + virt_addr[4], virt_addr[5]); + result = -ENODEV; + } + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} + +static const char *__wlp_wss_connect_state[] = { "WLP_WSS_UNCONNECTED", + "WLP_WSS_CONNECTED", + "WLP_WSS_CONNECT_FAILED", +}; + +static const char *wlp_wss_connect_state_str(unsigned id) +{ + if (id >= ARRAY_SIZE(__wlp_wss_connect_state)) + return "unknown WSS connection state"; + return __wlp_wss_connect_state[id]; +} + +/* + * View EDA cache from user space + * + * A debugging feature to give user visibility into the EDA cache. Also + * used to display members of WSS to user (called from wlp_wss_members_show()) + */ +ssize_t wlp_eda_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + struct wlp_eda_node *entry; + unsigned long flags; + struct wlp_eda *eda = &wlp->eda; + spin_lock_irqsave(&eda->lock, flags); + result = scnprintf(buf, PAGE_SIZE, "#eth_addr dev_addr wss_ptr " + "tag state virt_addr\n"); + list_for_each_entry(entry, &eda->cache, list_node) { + result += scnprintf(buf + result, PAGE_SIZE - result, + "%02x:%02x:%02x:%02x:%02x:%02x %02x:%02x " + "%p 0x%02x %s " + "%02x:%02x:%02x:%02x:%02x:%02x\n", + entry->eth_addr[0], entry->eth_addr[1], + entry->eth_addr[2], entry->eth_addr[3], + entry->eth_addr[4], entry->eth_addr[5], + entry->dev_addr.data[1], + entry->dev_addr.data[0], entry->wss, + entry->tag, + wlp_wss_connect_state_str(entry->state), + entry->virt_addr[0], entry->virt_addr[1], + entry->virt_addr[2], entry->virt_addr[3], + entry->virt_addr[4], entry->virt_addr[5]); + if (result >= PAGE_SIZE) + break; + } + spin_unlock_irqrestore(&eda->lock, flags); + return result; +} +EXPORT_SYMBOL_GPL(wlp_eda_show); + +/* + * Add new EDA cache entry based on user input in sysfs + * + * Should only be used for debugging. + * + * The WSS is assumed to be the only WSS supported. This needs to be + * redesigned when we support more than one WSS. + */ +ssize_t wlp_eda_store(struct wlp *wlp, const char *buf, size_t size) +{ + ssize_t result; + struct wlp_eda *eda = &wlp->eda; + u8 eth_addr[6]; + struct uwb_dev_addr dev_addr; + u8 tag; + unsigned state; + + result = sscanf(buf, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx " + "%02hhx:%02hhx %02hhx %u\n", + ð_addr[0], ð_addr[1], + ð_addr[2], ð_addr[3], + ð_addr[4], ð_addr[5], + &dev_addr.data[1], &dev_addr.data[0], &tag, &state); + switch (result) { + case 6: /* no dev addr specified -- remove entry NOT IMPLEMENTED */ + /*result = wlp_eda_rm(eda, eth_addr, &dev_addr);*/ + result = -ENOSYS; + break; + case 10: + state = state >= 1 ? 1 : 0; + result = wlp_eda_create_node(eda, eth_addr, &dev_addr); + if (result < 0 && result != -EEXIST) + goto error; + /* Set virtual addr to be same as MAC */ + result = wlp_eda_update_node(eda, &dev_addr, &wlp->wss, + eth_addr, tag, state); + if (result < 0) + goto error; + break; + default: /* bad format */ + result = -EINVAL; + } +error: + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_eda_store); diff --git a/drivers/uwb/wlp/messages.c b/drivers/uwb/wlp/messages.c new file mode 100644 index 000000000000..a64cb8241713 --- /dev/null +++ b/drivers/uwb/wlp/messages.c @@ -0,0 +1,1946 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * Message construction and parsing + * + * Copyright (C) 2007 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include <linux/wlp.h> +#define D_LOCAL 6 +#include <linux/uwb/debug.h> +#include "wlp-internal.h" + +static +const char *__wlp_assoc_frame[] = { + [WLP_ASSOC_D1] = "WLP_ASSOC_D1", + [WLP_ASSOC_D2] = "WLP_ASSOC_D2", + [WLP_ASSOC_M1] = "WLP_ASSOC_M1", + [WLP_ASSOC_M2] = "WLP_ASSOC_M2", + [WLP_ASSOC_M3] = "WLP_ASSOC_M3", + [WLP_ASSOC_M4] = "WLP_ASSOC_M4", + [WLP_ASSOC_M5] = "WLP_ASSOC_M5", + [WLP_ASSOC_M6] = "WLP_ASSOC_M6", + [WLP_ASSOC_M7] = "WLP_ASSOC_M7", + [WLP_ASSOC_M8] = "WLP_ASSOC_M8", + [WLP_ASSOC_F0] = "WLP_ASSOC_F0", + [WLP_ASSOC_E1] = "WLP_ASSOC_E1", + [WLP_ASSOC_E2] = "WLP_ASSOC_E2", + [WLP_ASSOC_C1] = "WLP_ASSOC_C1", + [WLP_ASSOC_C2] = "WLP_ASSOC_C2", + [WLP_ASSOC_C3] = "WLP_ASSOC_C3", + [WLP_ASSOC_C4] = "WLP_ASSOC_C4", +}; + +static const char *wlp_assoc_frame_str(unsigned id) +{ + if (id >= ARRAY_SIZE(__wlp_assoc_frame)) + return "unknown association frame"; + return __wlp_assoc_frame[id]; +} + +static const char *__wlp_assc_error[] = { + "none", + "Authenticator Failure", + "Rogue activity suspected", + "Device busy", + "Setup Locked", + "Registrar not ready", + "Invalid WSS selection", + "Message timeout", + "Enrollment session timeout", + "Device password invalid", + "Unsupported version", + "Internal error", + "Undefined error", + "Numeric comparison failure", + "Waiting for user input", +}; + +static const char *wlp_assc_error_str(unsigned id) +{ + if (id >= ARRAY_SIZE(__wlp_assc_error)) + return "unknown WLP association error"; + return __wlp_assc_error[id]; +} + +static inline void wlp_set_attr_hdr(struct wlp_attr_hdr *hdr, unsigned type, + size_t len) +{ + hdr->type = cpu_to_le16(type); + hdr->length = cpu_to_le16(len); +} + +/* + * Populate fields of a constant sized attribute + * + * @returns: total size of attribute including size of new value + * + * We have two instances of this function (wlp_pset and wlp_set): one takes + * the value as a parameter, the other takes a pointer to the value as + * parameter. They thus only differ in how the value is assigned to the + * attribute. + * + * We use sizeof(*attr) - sizeof(struct wlp_attr_hdr) instead of + * sizeof(type) to be able to use this same code for the structures that + * contain 8bit enum values and be able to deal with pointer types. + */ +#define wlp_set(type, type_code, name) \ +static size_t wlp_set_##name(struct wlp_attr_##name *attr, type value) \ +{ \ + d_fnstart(6, NULL, "(attribute %p)\n", attr); \ + wlp_set_attr_hdr(&attr->hdr, type_code, \ + sizeof(*attr) - sizeof(struct wlp_attr_hdr)); \ + attr->name = value; \ + d_dump(6, NULL, attr, sizeof(*attr)); \ + d_fnend(6, NULL, "(attribute %p)\n", attr); \ + return sizeof(*attr); \ +} + +#define wlp_pset(type, type_code, name) \ +static size_t wlp_set_##name(struct wlp_attr_##name *attr, type value) \ +{ \ + d_fnstart(6, NULL, "(attribute %p)\n", attr); \ + wlp_set_attr_hdr(&attr->hdr, type_code, \ + sizeof(*attr) - sizeof(struct wlp_attr_hdr)); \ + attr->name = *value; \ + d_dump(6, NULL, attr, sizeof(*attr)); \ + d_fnend(6, NULL, "(attribute %p)\n", attr); \ + return sizeof(*attr); \ +} + +/** + * Populate fields of a variable attribute + * + * @returns: total size of attribute including size of new value + * + * Provided with a pointer to the memory area reserved for the + * attribute structure, the field is populated with the value. The + * reserved memory has to contain enough space for the value. + */ +#define wlp_vset(type, type_code, name) \ +static size_t wlp_set_##name(struct wlp_attr_##name *attr, type value, \ + size_t len) \ +{ \ + d_fnstart(6, NULL, "(attribute %p)\n", attr); \ + wlp_set_attr_hdr(&attr->hdr, type_code, len); \ + memcpy(attr->name, value, len); \ + d_dump(6, NULL, attr, sizeof(*attr) + len); \ + d_fnend(6, NULL, "(attribute %p)\n", attr); \ + return sizeof(*attr) + len; \ +} + +wlp_vset(char *, WLP_ATTR_DEV_NAME, dev_name) +wlp_vset(char *, WLP_ATTR_MANUF, manufacturer) +wlp_set(enum wlp_assoc_type, WLP_ATTR_MSG_TYPE, msg_type) +wlp_vset(char *, WLP_ATTR_MODEL_NAME, model_name) +wlp_vset(char *, WLP_ATTR_MODEL_NR, model_nr) +wlp_vset(char *, WLP_ATTR_SERIAL, serial) +wlp_vset(char *, WLP_ATTR_WSS_NAME, wss_name) +wlp_pset(struct wlp_uuid *, WLP_ATTR_UUID_E, uuid_e) +wlp_pset(struct wlp_uuid *, WLP_ATTR_UUID_R, uuid_r) +wlp_pset(struct wlp_uuid *, WLP_ATTR_WSSID, wssid) +wlp_pset(struct wlp_dev_type *, WLP_ATTR_PRI_DEV_TYPE, prim_dev_type) +/*wlp_pset(struct wlp_dev_type *, WLP_ATTR_SEC_DEV_TYPE, sec_dev_type)*/ +wlp_set(u8, WLP_ATTR_WLP_VER, version) +wlp_set(enum wlp_assc_error, WLP_ATTR_WLP_ASSC_ERR, wlp_assc_err) +wlp_set(enum wlp_wss_sel_mthd, WLP_ATTR_WSS_SEL_MTHD, wss_sel_mthd) +wlp_set(u8, WLP_ATTR_ACC_ENRL, accept_enrl) +wlp_set(u8, WLP_ATTR_WSS_SEC_STAT, wss_sec_status) +wlp_pset(struct uwb_mac_addr *, WLP_ATTR_WSS_BCAST, wss_bcast) +wlp_pset(struct wlp_nonce *, WLP_ATTR_ENRL_NONCE, enonce) +wlp_pset(struct wlp_nonce *, WLP_ATTR_REG_NONCE, rnonce) +wlp_set(u8, WLP_ATTR_WSS_TAG, wss_tag) +wlp_pset(struct uwb_mac_addr *, WLP_ATTR_WSS_VIRT, wss_virt) + +/** + * Fill in the WSS information attributes + * + * We currently only support one WSS, and this is assumed in this function + * that can populate only one WSS information attribute. + */ +static size_t wlp_set_wss_info(struct wlp_attr_wss_info *attr, + struct wlp_wss *wss) +{ + size_t datalen; + void *ptr = attr->wss_info; + size_t used = sizeof(*attr); + d_fnstart(6, NULL, "(attribute %p)\n", attr); + datalen = sizeof(struct wlp_wss_info) + strlen(wss->name); + wlp_set_attr_hdr(&attr->hdr, WLP_ATTR_WSS_INFO, datalen); + used = wlp_set_wssid(ptr, &wss->wssid); + used += wlp_set_wss_name(ptr + used, wss->name, strlen(wss->name)); + used += wlp_set_accept_enrl(ptr + used, wss->accept_enroll); + used += wlp_set_wss_sec_status(ptr + used, wss->secure_status); + used += wlp_set_wss_bcast(ptr + used, &wss->bcast); + d_dump(6, NULL, attr, sizeof(*attr) + datalen); + d_fnend(6, NULL, "(attribute %p, used %d)\n", + attr, (int)(sizeof(*attr) + used)); + return sizeof(*attr) + used; +} + +/** + * Verify attribute header + * + * @hdr: Pointer to attribute header that will be verified. + * @type: Expected attribute type. + * @len: Expected length of attribute value (excluding header). + * + * Most attribute values have a known length even when they do have a + * length field. This knowledge can be used via this function to verify + * that the length field matches the expected value. + */ +static int wlp_check_attr_hdr(struct wlp *wlp, struct wlp_attr_hdr *hdr, + enum wlp_attr_type type, unsigned len) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + + if (le16_to_cpu(hdr->type) != type) { + dev_err(dev, "WLP: unexpected header type. Expected " + "%u, got %u.\n", type, le16_to_cpu(hdr->type)); + return -EINVAL; + } + if (le16_to_cpu(hdr->length) != len) { + dev_err(dev, "WLP: unexpected length in header. Expected " + "%u, got %u.\n", len, le16_to_cpu(hdr->length)); + return -EINVAL; + } + return 0; +} + +/** + * Check if header of WSS information attribute valid + * + * @returns: length of WSS attributes (value of length attribute field) if + * valid WSS information attribute found + * -ENODATA if no WSS information attribute found + * -EIO other error occured + * + * The WSS information attribute is optional. The function will be provided + * with a pointer to data that could _potentially_ be a WSS information + * attribute. If a valid WSS information attribute is found it will return + * 0, if no WSS information attribute is found it will return -ENODATA, and + * another error will be returned if it is a WSS information attribute, but + * some parsing failure occured. + */ +static int wlp_check_wss_info_attr_hdr(struct wlp *wlp, + struct wlp_attr_hdr *hdr, size_t buflen) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + size_t len; + int result = 0; + + if (buflen < sizeof(*hdr)) { + dev_err(dev, "WLP: Not enough space in buffer to parse" + " WSS information attribute header.\n"); + result = -EIO; + goto out; + } + if (le16_to_cpu(hdr->type) != WLP_ATTR_WSS_INFO) { + /* WSS information is optional */ + result = -ENODATA; + goto out; + } + len = le16_to_cpu(hdr->length); + if (buflen < sizeof(*hdr) + len) { + dev_err(dev, "WLP: Not enough space in buffer to parse " + "variable data. Got %d, expected %d.\n", + (int)buflen, (int)(sizeof(*hdr) + len)); + result = -EIO; + goto out; + } + result = len; +out: + return result; +} + + +/** + * Get value of attribute from fixed size attribute field. + * + * @attr: Pointer to attribute field. + * @value: Pointer to variable in which attribute value will be placed. + * @buflen: Size of buffer in which attribute field (including header) + * can be found. + * @returns: Amount of given buffer consumed by parsing for this attribute. + * + * The size and type of the value is known by the type of the attribute. + */ +#define wlp_get(type, type_code, name) \ +ssize_t wlp_get_##name(struct wlp *wlp, struct wlp_attr_##name *attr, \ + type *value, ssize_t buflen) \ +{ \ + struct device *dev = &wlp->rc->uwb_dev.dev; \ + if (buflen < 0) \ + return -EINVAL; \ + if (buflen < sizeof(*attr)) { \ + dev_err(dev, "WLP: Not enough space in buffer to parse" \ + " attribute field. Need %d, received %zu\n", \ + (int)sizeof(*attr), buflen); \ + return -EIO; \ + } \ + if (wlp_check_attr_hdr(wlp, &attr->hdr, type_code, \ + sizeof(attr->name)) < 0) { \ + dev_err(dev, "WLP: Header verification failed. \n"); \ + return -EINVAL; \ + } \ + *value = attr->name; \ + return sizeof(*attr); \ +} + +#define wlp_get_sparse(type, type_code, name) \ + static wlp_get(type, type_code, name) + +/** + * Get value of attribute from variable sized attribute field. + * + * @max: The maximum size of this attribute. This value is dictated by + * the maximum value from the WLP specification. + * + * @attr: Pointer to attribute field. + * @value: Pointer to variable that will contain the value. The memory + * must already have been allocated for this value. + * @buflen: Size of buffer in which attribute field (including header) + * can be found. + * @returns: Amount of given bufferconsumed by parsing for this attribute. + */ +#define wlp_vget(type_val, type_code, name, max) \ +static ssize_t wlp_get_##name(struct wlp *wlp, \ + struct wlp_attr_##name *attr, \ + type_val *value, ssize_t buflen) \ +{ \ + struct device *dev = &wlp->rc->uwb_dev.dev; \ + size_t len; \ + if (buflen < 0) \ + return -EINVAL; \ + if (buflen < sizeof(*attr)) { \ + dev_err(dev, "WLP: Not enough space in buffer to parse" \ + " header.\n"); \ + return -EIO; \ + } \ + if (le16_to_cpu(attr->hdr.type) != type_code) { \ + dev_err(dev, "WLP: Unexpected attribute type. Got %u, " \ + "expected %u.\n", le16_to_cpu(attr->hdr.type), \ + type_code); \ + return -EINVAL; \ + } \ + len = le16_to_cpu(attr->hdr.length); \ + if (len > max) { \ + dev_err(dev, "WLP: Attribute larger than maximum " \ + "allowed. Received %zu, max is %d.\n", len, \ + (int)max); \ + return -EFBIG; \ + } \ + if (buflen < sizeof(*attr) + len) { \ + dev_err(dev, "WLP: Not enough space in buffer to parse "\ + "variable data.\n"); \ + return -EIO; \ + } \ + memcpy(value, (void *) attr + sizeof(*attr), len); \ + return sizeof(*attr) + len; \ +} + +wlp_get(u8, WLP_ATTR_WLP_VER, version) +wlp_get_sparse(enum wlp_wss_sel_mthd, WLP_ATTR_WSS_SEL_MTHD, wss_sel_mthd) +wlp_get_sparse(struct wlp_dev_type, WLP_ATTR_PRI_DEV_TYPE, prim_dev_type) +wlp_get_sparse(enum wlp_assc_error, WLP_ATTR_WLP_ASSC_ERR, wlp_assc_err) +wlp_get_sparse(struct wlp_uuid, WLP_ATTR_UUID_E, uuid_e) +wlp_get_sparse(struct wlp_uuid, WLP_ATTR_UUID_R, uuid_r) +wlp_get(struct wlp_uuid, WLP_ATTR_WSSID, wssid) +wlp_get_sparse(u8, WLP_ATTR_ACC_ENRL, accept_enrl) +wlp_get_sparse(u8, WLP_ATTR_WSS_SEC_STAT, wss_sec_status) +wlp_get_sparse(struct uwb_mac_addr, WLP_ATTR_WSS_BCAST, wss_bcast) +wlp_get_sparse(u8, WLP_ATTR_WSS_TAG, wss_tag) +wlp_get_sparse(struct uwb_mac_addr, WLP_ATTR_WSS_VIRT, wss_virt) +wlp_get_sparse(struct wlp_nonce, WLP_ATTR_ENRL_NONCE, enonce) +wlp_get_sparse(struct wlp_nonce, WLP_ATTR_REG_NONCE, rnonce) + +/* The buffers for the device info attributes can be found in the + * wlp_device_info struct. These buffers contain one byte more than the + * max allowed by the spec - this is done to be able to add the + * terminating \0 for user display. This terminating byte is not required + * in the actual attribute field (because it has a length field) so the + * maximum allowed for this value is one less than its size in the + * structure. + */ +wlp_vget(char, WLP_ATTR_WSS_NAME, wss_name, + FIELD_SIZEOF(struct wlp_wss, name) - 1) +wlp_vget(char, WLP_ATTR_DEV_NAME, dev_name, + FIELD_SIZEOF(struct wlp_device_info, name) - 1) +wlp_vget(char, WLP_ATTR_MANUF, manufacturer, + FIELD_SIZEOF(struct wlp_device_info, manufacturer) - 1) +wlp_vget(char, WLP_ATTR_MODEL_NAME, model_name, + FIELD_SIZEOF(struct wlp_device_info, model_name) - 1) +wlp_vget(char, WLP_ATTR_MODEL_NR, model_nr, + FIELD_SIZEOF(struct wlp_device_info, model_nr) - 1) +wlp_vget(char, WLP_ATTR_SERIAL, serial, + FIELD_SIZEOF(struct wlp_device_info, serial) - 1) + +/** + * Retrieve WSS Name, Accept enroll, Secure status, Broadcast from WSS info + * + * @attr: pointer to WSS name attribute in WSS information attribute field + * @info: structure that will be populated with data from WSS information + * field (WSS name, Accept enroll, secure status, broadcast address) + * @buflen: size of buffer + * + * Although the WSSID attribute forms part of the WSS info attribute it is + * retrieved separately and stored in a different location. + */ +static ssize_t wlp_get_wss_info_attrs(struct wlp *wlp, + struct wlp_attr_hdr *attr, + struct wlp_wss_tmp_info *info, + ssize_t buflen) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + void *ptr = attr; + size_t used = 0; + ssize_t result = -EINVAL; + + d_printf(6, dev, "WLP: WSS info: Retrieving WSS name\n"); + result = wlp_get_wss_name(wlp, ptr, info->name, buflen); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSS name from " + "WSS info in D2 message.\n"); + goto error_parse; + } + used += result; + d_printf(6, dev, "WLP: WSS info: Retrieving accept enroll\n"); + result = wlp_get_accept_enrl(wlp, ptr + used, &info->accept_enroll, + buflen - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain accepting " + "enrollment from WSS info in D2 message.\n"); + goto error_parse; + } + if (info->accept_enroll != 0 && info->accept_enroll != 1) { + dev_err(dev, "WLP: invalid value for accepting " + "enrollment in D2 message.\n"); + result = -EINVAL; + goto error_parse; + } + used += result; + d_printf(6, dev, "WLP: WSS info: Retrieving secure status\n"); + result = wlp_get_wss_sec_status(wlp, ptr + used, &info->sec_status, + buflen - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain secure " + "status from WSS info in D2 message.\n"); + goto error_parse; + } + if (info->sec_status != 0 && info->sec_status != 1) { + dev_err(dev, "WLP: invalid value for secure " + "status in D2 message.\n"); + result = -EINVAL; + goto error_parse; + } + used += result; + d_printf(6, dev, "WLP: WSS info: Retrieving broadcast\n"); + result = wlp_get_wss_bcast(wlp, ptr + used, &info->bcast, + buflen - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain broadcast " + "address from WSS info in D2 message.\n"); + goto error_parse; + } + used += result; + result = used; +error_parse: + return result; +} + +/** + * Create a new WSSID entry for the neighbor, allocate temporary storage + * + * Each neighbor can have many WSS active. We maintain a list of WSSIDs + * advertised by neighbor. During discovery we also cache information about + * these WSS in temporary storage. + * + * The temporary storage will be removed after it has been used (eg. + * displayed to user), the wssid element will be removed from the list when + * the neighbor is rediscovered or when it disappears. + */ +static struct wlp_wssid_e *wlp_create_wssid_e(struct wlp *wlp, + struct wlp_neighbor_e *neighbor) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_wssid_e *wssid_e; + + wssid_e = kzalloc(sizeof(*wssid_e), GFP_KERNEL); + if (wssid_e == NULL) { + dev_err(dev, "WLP: unable to allocate memory " + "for WSS information.\n"); + goto error_alloc; + } + wssid_e->info = kzalloc(sizeof(struct wlp_wss_tmp_info), GFP_KERNEL); + if (wssid_e->info == NULL) { + dev_err(dev, "WLP: unable to allocate memory " + "for temporary WSS information.\n"); + kfree(wssid_e); + wssid_e = NULL; + goto error_alloc; + } + list_add(&wssid_e->node, &neighbor->wssid); +error_alloc: + return wssid_e; +} + +/** + * Parse WSS information attribute + * + * @attr: pointer to WSS information attribute header + * @buflen: size of buffer in which WSS information attribute appears + * @wssid: will place wssid from WSS info attribute in this location + * @wss_info: will place other information from WSS information attribute + * in this location + * + * memory for @wssid and @wss_info must be allocated when calling this + */ +static ssize_t wlp_get_wss_info(struct wlp *wlp, struct wlp_attr_wss_info *attr, + size_t buflen, struct wlp_uuid *wssid, + struct wlp_wss_tmp_info *wss_info) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + ssize_t result; + size_t len; + size_t used = 0; + void *ptr; + + result = wlp_check_wss_info_attr_hdr(wlp, (struct wlp_attr_hdr *)attr, + buflen); + if (result < 0) + goto out; + len = result; + used = sizeof(*attr); + ptr = attr; + d_printf(6, dev, "WLP: WSS info: Retrieving WSSID\n"); + result = wlp_get_wssid(wlp, ptr + used, wssid, buflen - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSSID from WSS info.\n"); + goto out; + } + used += result; + result = wlp_get_wss_info_attrs(wlp, ptr + used, wss_info, + buflen - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSS information " + "from WSS information attributes. \n"); + goto out; + } + used += result; + if (len + sizeof(*attr) != used) { + dev_err(dev, "WLP: Amount of data parsed does not " + "match length field. Parsed %zu, length " + "field %zu. \n", used, len); + result = -EINVAL; + goto out; + } + result = used; + d_printf(6, dev, "WLP: Successfully parsed WLP information " + "attribute. used %zu bytes\n", used); +out: + return result; +} + +/** + * Retrieve WSS info from association frame + * + * @attr: pointer to WSS information attribute + * @neighbor: ptr to neighbor being discovered, NULL if enrollment in + * progress + * @wss: ptr to WSS being enrolled in, NULL if discovery in progress + * @buflen: size of buffer in which WSS information appears + * + * The WSS information attribute appears in the D2 association message. + * This message is used in two ways: to discover all neighbors or to enroll + * into a WSS activated by a neighbor. During discovery we only want to + * store the WSS info in a cache, to be deleted right after it has been + * used (eg. displayed to the user). During enrollment we store the WSS + * information for the lifetime of enrollment. + * + * During discovery we are interested in all WSS information, during + * enrollment we are only interested in the WSS being enrolled in. Even so, + * when in enrollment we keep parsing the message after finding the WSS of + * interest, this simplifies the calling routine in that it can be sure + * that all WSS information attributes have been parsed out of the message. + * + * Association frame is process with nbmutex held. The list access is safe. + */ +static ssize_t wlp_get_all_wss_info(struct wlp *wlp, + struct wlp_attr_wss_info *attr, + struct wlp_neighbor_e *neighbor, + struct wlp_wss *wss, ssize_t buflen) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + size_t used = 0; + ssize_t result = -EINVAL; + struct wlp_attr_wss_info *cur; + struct wlp_uuid wssid; + struct wlp_wss_tmp_info wss_info; + unsigned enroll; /* 0 - discovery to cache, 1 - enrollment */ + struct wlp_wssid_e *wssid_e; + char buf[WLP_WSS_UUID_STRSIZE]; + + d_fnstart(6, dev, "wlp %p, attr %p, neighbor %p, wss %p, buflen %d \n", + wlp, attr, neighbor, wss, (int)buflen); + if (buflen < 0) + goto out; + + if (neighbor != NULL && wss == NULL) + enroll = 0; /* discovery */ + else if (wss != NULL && neighbor == NULL) + enroll = 1; /* enrollment */ + else + goto out; + + cur = attr; + while (buflen - used > 0) { + memset(&wss_info, 0, sizeof(wss_info)); + cur = (void *)cur + used; + result = wlp_get_wss_info(wlp, cur, buflen - used, &wssid, + &wss_info); + if (result == -ENODATA) { + result = used; + goto out; + } else if (result < 0) { + dev_err(dev, "WLP: Unable to parse WSS information " + "from WSS information attribute. \n"); + result = -EINVAL; + goto error_parse; + } + if (enroll && !memcmp(&wssid, &wss->wssid, sizeof(wssid))) { + if (wss_info.accept_enroll != 1) { + dev_err(dev, "WLP: Requested WSS does " + "not accept enrollment.\n"); + result = -EINVAL; + goto out; + } + memcpy(wss->name, wss_info.name, sizeof(wss->name)); + wss->bcast = wss_info.bcast; + wss->secure_status = wss_info.sec_status; + wss->accept_enroll = wss_info.accept_enroll; + wss->state = WLP_WSS_STATE_PART_ENROLLED; + wlp_wss_uuid_print(buf, sizeof(buf), &wssid); + d_printf(2, dev, "WLP: Found WSS %s. Enrolling.\n", + buf); + } else { + wssid_e = wlp_create_wssid_e(wlp, neighbor); + if (wssid_e == NULL) { + dev_err(dev, "WLP: Cannot create new WSSID " + "entry for neighbor %02x:%02x.\n", + neighbor->uwb_dev->dev_addr.data[1], + neighbor->uwb_dev->dev_addr.data[0]); + result = -ENOMEM; + goto out; + } + wssid_e->wssid = wssid; + *wssid_e->info = wss_info; + } + used += result; + } + result = used; +error_parse: + if (result < 0 && !enroll) /* this was a discovery */ + wlp_remove_neighbor_tmp_info(neighbor); +out: + d_fnend(6, dev, "wlp %p, attr %p, neighbor %p, wss %p, buflen %d, " + "result %d \n", wlp, attr, neighbor, wss, (int)buflen, + (int)result); + return result; + +} + +/** + * Parse WSS information attributes into cache for discovery + * + * @attr: the first WSS information attribute in message + * @neighbor: the neighbor whose cache will be populated + * @buflen: size of the input buffer + */ +static ssize_t wlp_get_wss_info_to_cache(struct wlp *wlp, + struct wlp_attr_wss_info *attr, + struct wlp_neighbor_e *neighbor, + ssize_t buflen) +{ + return wlp_get_all_wss_info(wlp, attr, neighbor, NULL, buflen); +} + +/** + * Parse WSS information attributes into WSS struct for enrollment + * + * @attr: the first WSS information attribute in message + * @wss: the WSS that will be enrolled + * @buflen: size of the input buffer + */ +static ssize_t wlp_get_wss_info_to_enroll(struct wlp *wlp, + struct wlp_attr_wss_info *attr, + struct wlp_wss *wss, ssize_t buflen) +{ + return wlp_get_all_wss_info(wlp, attr, NULL, wss, buflen); +} + +/** + * Construct a D1 association frame + * + * We use the radio control functions to determine the values of the device + * properties. These are of variable length and the total space needed is + * tallied first before we start constructing the message. The radio + * control functions return strings that are terminated with \0. This + * character should not be included in the message (there is a length field + * accompanying it in the attribute). + */ +static int wlp_build_assoc_d1(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb) +{ + + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = 0; + struct wlp_device_info *info; + size_t used = 0; + struct wlp_frame_assoc *_d1; + struct sk_buff *_skb; + void *d1_itr; + + d_fnstart(6, dev, "wlp %p\n", wlp); + if (wlp->dev_info == NULL) { + result = __wlp_setup_device_info(wlp); + if (result < 0) { + dev_err(dev, "WLP: Unable to setup device " + "information for D1 message.\n"); + goto error; + } + } + info = wlp->dev_info; + d_printf(6, dev, "Local properties:\n" + "Device name (%d bytes): %s\n" + "Model name (%d bytes): %s\n" + "Manufacturer (%d bytes): %s\n" + "Model number (%d bytes): %s\n" + "Serial number (%d bytes): %s\n" + "Primary device type: \n" + " Category: %d \n" + " OUI: %02x:%02x:%02x \n" + " OUI Subdivision: %u \n", + (int)strlen(info->name), info->name, + (int)strlen(info->model_name), info->model_name, + (int)strlen(info->manufacturer), info->manufacturer, + (int)strlen(info->model_nr), info->model_nr, + (int)strlen(info->serial), info->serial, + info->prim_dev_type.category, + info->prim_dev_type.OUI[0], info->prim_dev_type.OUI[1], + info->prim_dev_type.OUI[2], info->prim_dev_type.OUIsubdiv); + _skb = dev_alloc_skb(sizeof(*_d1) + + sizeof(struct wlp_attr_uuid_e) + + sizeof(struct wlp_attr_wss_sel_mthd) + + sizeof(struct wlp_attr_dev_name) + + strlen(info->name) + + sizeof(struct wlp_attr_manufacturer) + + strlen(info->manufacturer) + + sizeof(struct wlp_attr_model_name) + + strlen(info->model_name) + + sizeof(struct wlp_attr_model_nr) + + strlen(info->model_nr) + + sizeof(struct wlp_attr_serial) + + strlen(info->serial) + + sizeof(struct wlp_attr_prim_dev_type) + + sizeof(struct wlp_attr_wlp_assc_err)); + if (_skb == NULL) { + dev_err(dev, "WLP: Cannot allocate memory for association " + "message.\n"); + result = -ENOMEM; + goto error; + } + _d1 = (void *) _skb->data; + d_printf(6, dev, "D1 starts at %p \n", _d1); + _d1->hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); + _d1->hdr.type = WLP_FRAME_ASSOCIATION; + _d1->type = WLP_ASSOC_D1; + + wlp_set_version(&_d1->version, WLP_VERSION); + wlp_set_msg_type(&_d1->msg_type, WLP_ASSOC_D1); + d1_itr = _d1->attr; + used = wlp_set_uuid_e(d1_itr, &wlp->uuid); + used += wlp_set_wss_sel_mthd(d1_itr + used, WLP_WSS_REG_SELECT); + used += wlp_set_dev_name(d1_itr + used, info->name, + strlen(info->name)); + used += wlp_set_manufacturer(d1_itr + used, info->manufacturer, + strlen(info->manufacturer)); + used += wlp_set_model_name(d1_itr + used, info->model_name, + strlen(info->model_name)); + used += wlp_set_model_nr(d1_itr + used, info->model_nr, + strlen(info->model_nr)); + used += wlp_set_serial(d1_itr + used, info->serial, + strlen(info->serial)); + used += wlp_set_prim_dev_type(d1_itr + used, &info->prim_dev_type); + used += wlp_set_wlp_assc_err(d1_itr + used, WLP_ASSOC_ERROR_NONE); + skb_put(_skb, sizeof(*_d1) + used); + d_printf(6, dev, "D1 message:\n"); + d_dump(6, dev, _d1, sizeof(*_d1) + + sizeof(struct wlp_attr_uuid_e) + + sizeof(struct wlp_attr_wss_sel_mthd) + + sizeof(struct wlp_attr_dev_name) + + strlen(info->name) + + sizeof(struct wlp_attr_manufacturer) + + strlen(info->manufacturer) + + sizeof(struct wlp_attr_model_name) + + strlen(info->model_name) + + sizeof(struct wlp_attr_model_nr) + + strlen(info->model_nr) + + sizeof(struct wlp_attr_serial) + + strlen(info->serial) + + sizeof(struct wlp_attr_prim_dev_type) + + sizeof(struct wlp_attr_wlp_assc_err)); + *skb = _skb; +error: + d_fnend(6, dev, "wlp %p, result = %d\n", wlp, result); + return result; +} + +/** + * Construct a D2 association frame + * + * We use the radio control functions to determine the values of the device + * properties. These are of variable length and the total space needed is + * tallied first before we start constructing the message. The radio + * control functions return strings that are terminated with \0. This + * character should not be included in the message (there is a length field + * accompanying it in the attribute). + */ +static +int wlp_build_assoc_d2(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb, struct wlp_uuid *uuid_e) +{ + + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = 0; + struct wlp_device_info *info; + size_t used = 0; + struct wlp_frame_assoc *_d2; + struct sk_buff *_skb; + void *d2_itr; + size_t mem_needed; + + d_fnstart(6, dev, "wlp %p\n", wlp); + if (wlp->dev_info == NULL) { + result = __wlp_setup_device_info(wlp); + if (result < 0) { + dev_err(dev, "WLP: Unable to setup device " + "information for D2 message.\n"); + goto error; + } + } + info = wlp->dev_info; + d_printf(6, dev, "Local properties:\n" + "Device name (%d bytes): %s\n" + "Model name (%d bytes): %s\n" + "Manufacturer (%d bytes): %s\n" + "Model number (%d bytes): %s\n" + "Serial number (%d bytes): %s\n" + "Primary device type: \n" + " Category: %d \n" + " OUI: %02x:%02x:%02x \n" + " OUI Subdivision: %u \n", + (int)strlen(info->name), info->name, + (int)strlen(info->model_name), info->model_name, + (int)strlen(info->manufacturer), info->manufacturer, + (int)strlen(info->model_nr), info->model_nr, + (int)strlen(info->serial), info->serial, + info->prim_dev_type.category, + info->prim_dev_type.OUI[0], info->prim_dev_type.OUI[1], + info->prim_dev_type.OUI[2], info->prim_dev_type.OUIsubdiv); + mem_needed = sizeof(*_d2) + + sizeof(struct wlp_attr_uuid_e) + + sizeof(struct wlp_attr_uuid_r) + + sizeof(struct wlp_attr_dev_name) + + strlen(info->name) + + sizeof(struct wlp_attr_manufacturer) + + strlen(info->manufacturer) + + sizeof(struct wlp_attr_model_name) + + strlen(info->model_name) + + sizeof(struct wlp_attr_model_nr) + + strlen(info->model_nr) + + sizeof(struct wlp_attr_serial) + + strlen(info->serial) + + sizeof(struct wlp_attr_prim_dev_type) + + sizeof(struct wlp_attr_wlp_assc_err); + if (wlp->wss.state >= WLP_WSS_STATE_ACTIVE) + mem_needed += sizeof(struct wlp_attr_wss_info) + + sizeof(struct wlp_wss_info) + + strlen(wlp->wss.name); + _skb = dev_alloc_skb(mem_needed); + if (_skb == NULL) { + dev_err(dev, "WLP: Cannot allocate memory for association " + "message.\n"); + result = -ENOMEM; + goto error; + } + _d2 = (void *) _skb->data; + d_printf(6, dev, "D2 starts at %p \n", _d2); + _d2->hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); + _d2->hdr.type = WLP_FRAME_ASSOCIATION; + _d2->type = WLP_ASSOC_D2; + + wlp_set_version(&_d2->version, WLP_VERSION); + wlp_set_msg_type(&_d2->msg_type, WLP_ASSOC_D2); + d2_itr = _d2->attr; + used = wlp_set_uuid_e(d2_itr, uuid_e); + used += wlp_set_uuid_r(d2_itr + used, &wlp->uuid); + if (wlp->wss.state >= WLP_WSS_STATE_ACTIVE) + used += wlp_set_wss_info(d2_itr + used, &wlp->wss); + used += wlp_set_dev_name(d2_itr + used, info->name, + strlen(info->name)); + used += wlp_set_manufacturer(d2_itr + used, info->manufacturer, + strlen(info->manufacturer)); + used += wlp_set_model_name(d2_itr + used, info->model_name, + strlen(info->model_name)); + used += wlp_set_model_nr(d2_itr + used, info->model_nr, + strlen(info->model_nr)); + used += wlp_set_serial(d2_itr + used, info->serial, + strlen(info->serial)); + used += wlp_set_prim_dev_type(d2_itr + used, &info->prim_dev_type); + used += wlp_set_wlp_assc_err(d2_itr + used, WLP_ASSOC_ERROR_NONE); + skb_put(_skb, sizeof(*_d2) + used); + d_printf(6, dev, "D2 message:\n"); + d_dump(6, dev, _d2, mem_needed); + *skb = _skb; +error: + d_fnend(6, dev, "wlp %p, result = %d\n", wlp, result); + return result; +} + +/** + * Allocate memory for and populate fields of F0 association frame + * + * Currently (while focusing on unsecure enrollment) we ignore the + * nonce's that could be placed in the message. Only the error field is + * populated by the value provided by the caller. + */ +static +int wlp_build_assoc_f0(struct wlp *wlp, struct sk_buff **skb, + enum wlp_assc_error error) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = -ENOMEM; + struct { + struct wlp_frame_assoc f0_hdr; + struct wlp_attr_enonce enonce; + struct wlp_attr_rnonce rnonce; + struct wlp_attr_wlp_assc_err assc_err; + } *f0; + struct sk_buff *_skb; + struct wlp_nonce tmp; + + d_fnstart(6, dev, "wlp %p\n", wlp); + _skb = dev_alloc_skb(sizeof(*f0)); + if (_skb == NULL) { + dev_err(dev, "WLP: Unable to allocate memory for F0 " + "association frame. \n"); + goto error_alloc; + } + f0 = (void *) _skb->data; + d_printf(6, dev, "F0 starts at %p \n", f0); + f0->f0_hdr.hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); + f0->f0_hdr.hdr.type = WLP_FRAME_ASSOCIATION; + f0->f0_hdr.type = WLP_ASSOC_F0; + wlp_set_version(&f0->f0_hdr.version, WLP_VERSION); + wlp_set_msg_type(&f0->f0_hdr.msg_type, WLP_ASSOC_F0); + memset(&tmp, 0, sizeof(tmp)); + wlp_set_enonce(&f0->enonce, &tmp); + wlp_set_rnonce(&f0->rnonce, &tmp); + wlp_set_wlp_assc_err(&f0->assc_err, error); + skb_put(_skb, sizeof(*f0)); + *skb = _skb; + result = 0; +error_alloc: + d_fnend(6, dev, "wlp %p, result %d \n", wlp, result); + return result; +} + +/** + * Parse F0 frame + * + * We just retrieve the values and print it as an error to the user. + * Calling function already knows an error occured (F0 indicates error), so + * we just parse the content as debug for higher layers. + */ +int wlp_parse_f0(struct wlp *wlp, struct sk_buff *skb) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_frame_assoc *f0 = (void *) skb->data; + void *ptr = skb->data; + size_t len = skb->len; + size_t used; + ssize_t result; + struct wlp_nonce enonce, rnonce; + enum wlp_assc_error assc_err; + char enonce_buf[WLP_WSS_NONCE_STRSIZE]; + char rnonce_buf[WLP_WSS_NONCE_STRSIZE]; + + used = sizeof(*f0); + result = wlp_get_enonce(wlp, ptr + used, &enonce, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Enrollee nonce " + "attribute from F0 message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_rnonce(wlp, ptr + used, &rnonce, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Registrar nonce " + "attribute from F0 message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_wlp_assc_err(wlp, ptr + used, &assc_err, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WLP Association error " + "attribute from F0 message.\n"); + goto error_parse; + } + wlp_wss_nonce_print(enonce_buf, sizeof(enonce_buf), &enonce); + wlp_wss_nonce_print(rnonce_buf, sizeof(rnonce_buf), &rnonce); + dev_err(dev, "WLP: Received F0 error frame from neighbor. Enrollee " + "nonce: %s, Registrar nonce: %s, WLP Association error: %s.\n", + enonce_buf, rnonce_buf, wlp_assc_error_str(assc_err)); + result = 0; +error_parse: + return result; +} + +/** + * Retrieve variable device information from association message + * + * The device information parsed is not required in any message. This + * routine will thus not fail if an attribute is not present. + * The attributes are expected in a certain order, even if all are not + * present. The "attribute type" value is used to ensure the attributes + * are parsed in the correct order. + * + * If an error is encountered during parsing the function will return an + * error code, when this happens the given device_info structure may be + * partially filled. + */ +static +int wlp_get_variable_info(struct wlp *wlp, void *data, + struct wlp_device_info *dev_info, ssize_t len) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + size_t used = 0; + struct wlp_attr_hdr *hdr; + ssize_t result = 0; + unsigned last = 0; + + while (len - used > 0) { + if (len - used < sizeof(*hdr)) { + dev_err(dev, "WLP: Partial data in frame, cannot " + "parse. \n"); + goto error_parse; + } + hdr = data + used; + switch (le16_to_cpu(hdr->type)) { + case WLP_ATTR_MANUF: + if (last >= WLP_ATTR_MANUF) { + dev_err(dev, "WLP: Incorrect order of " + "attribute values in D1 msg.\n"); + goto error_parse; + } + result = wlp_get_manufacturer(wlp, data + used, + dev_info->manufacturer, + len - used); + if (result < 0) { + dev_err(dev, "WLP: Unable to obtain " + "Manufacturer attribute from D1 " + "message.\n"); + goto error_parse; + } + last = WLP_ATTR_MANUF; + used += result; + break; + case WLP_ATTR_MODEL_NAME: + if (last >= WLP_ATTR_MODEL_NAME) { + dev_err(dev, "WLP: Incorrect order of " + "attribute values in D1 msg.\n"); + goto error_parse; + } + result = wlp_get_model_name(wlp, data + used, + dev_info->model_name, + len - used); + if (result < 0) { + dev_err(dev, "WLP: Unable to obtain Model " + "name attribute from D1 message.\n"); + goto error_parse; + } + last = WLP_ATTR_MODEL_NAME; + used += result; + break; + case WLP_ATTR_MODEL_NR: + if (last >= WLP_ATTR_MODEL_NR) { + dev_err(dev, "WLP: Incorrect order of " + "attribute values in D1 msg.\n"); + goto error_parse; + } + result = wlp_get_model_nr(wlp, data + used, + dev_info->model_nr, + len - used); + if (result < 0) { + dev_err(dev, "WLP: Unable to obtain Model " + "number attribute from D1 message.\n"); + goto error_parse; + } + last = WLP_ATTR_MODEL_NR; + used += result; + break; + case WLP_ATTR_SERIAL: + if (last >= WLP_ATTR_SERIAL) { + dev_err(dev, "WLP: Incorrect order of " + "attribute values in D1 msg.\n"); + goto error_parse; + } + result = wlp_get_serial(wlp, data + used, + dev_info->serial, len - used); + if (result < 0) { + dev_err(dev, "WLP: Unable to obtain Serial " + "number attribute from D1 message.\n"); + goto error_parse; + } + last = WLP_ATTR_SERIAL; + used += result; + break; + case WLP_ATTR_PRI_DEV_TYPE: + if (last >= WLP_ATTR_PRI_DEV_TYPE) { + dev_err(dev, "WLP: Incorrect order of " + "attribute values in D1 msg.\n"); + goto error_parse; + } + result = wlp_get_prim_dev_type(wlp, data + used, + &dev_info->prim_dev_type, + len - used); + if (result < 0) { + dev_err(dev, "WLP: Unable to obtain Primary " + "device type attribute from D1 " + "message.\n"); + goto error_parse; + } + dev_info->prim_dev_type.category = + le16_to_cpu(dev_info->prim_dev_type.category); + dev_info->prim_dev_type.subID = + le16_to_cpu(dev_info->prim_dev_type.subID); + last = WLP_ATTR_PRI_DEV_TYPE; + used += result; + break; + default: + /* This is not variable device information. */ + goto out; + break; + } + } +out: + return used; +error_parse: + return -EINVAL; +} + +/** + * Parse incoming D1 frame, populate attribute values + * + * Caller provides pointers to memory already allocated for attributes + * expected in the D1 frame. These variables will be populated. + */ +static +int wlp_parse_d1_frame(struct wlp *wlp, struct sk_buff *skb, + struct wlp_uuid *uuid_e, + enum wlp_wss_sel_mthd *sel_mthd, + struct wlp_device_info *dev_info, + enum wlp_assc_error *assc_err) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_frame_assoc *d1 = (void *) skb->data; + void *ptr = skb->data; + size_t len = skb->len; + size_t used; + ssize_t result; + + used = sizeof(*d1); + result = wlp_get_uuid_e(wlp, ptr + used, uuid_e, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain UUID-E attribute from D1 " + "message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_wss_sel_mthd(wlp, ptr + used, sel_mthd, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSS selection method " + "from D1 message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_dev_name(wlp, ptr + used, dev_info->name, + len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Device Name from D1 " + "message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_variable_info(wlp, ptr + used, dev_info, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Device Information from " + "D1 message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_wlp_assc_err(wlp, ptr + used, assc_err, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WLP Association Error " + "Information from D1 message.\n"); + goto error_parse; + } + result = 0; +error_parse: + return result; +} +/** + * Handle incoming D1 frame + * + * The frame has already been verified to contain an Association header with + * the correct version number. Parse the incoming frame, construct and send + * a D2 frame in response. + * + * It is not clear what to do with most fields in the incoming D1 frame. We + * retrieve and discard the information here for now. + */ +void wlp_handle_d1_frame(struct work_struct *ws) +{ + struct wlp_assoc_frame_ctx *frame_ctx = container_of(ws, + struct wlp_assoc_frame_ctx, + ws); + struct wlp *wlp = frame_ctx->wlp; + struct wlp_wss *wss = &wlp->wss; + struct sk_buff *skb = frame_ctx->skb; + struct uwb_dev_addr *src = &frame_ctx->src; + int result; + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_uuid uuid_e; + enum wlp_wss_sel_mthd sel_mthd = 0; + struct wlp_device_info dev_info; + enum wlp_assc_error assc_err; + char uuid[WLP_WSS_UUID_STRSIZE]; + struct sk_buff *resp = NULL; + + /* Parse D1 frame */ + d_fnstart(6, dev, "WLP: handle D1 frame. wlp = %p, skb = %p\n", + wlp, skb); + mutex_lock(&wss->mutex); + mutex_lock(&wlp->mutex); /* to access wlp->uuid */ + memset(&dev_info, 0, sizeof(dev_info)); + result = wlp_parse_d1_frame(wlp, skb, &uuid_e, &sel_mthd, &dev_info, + &assc_err); + if (result < 0) { + dev_err(dev, "WLP: Unable to parse incoming D1 frame.\n"); + kfree_skb(skb); + goto out; + } + wlp_wss_uuid_print(uuid, sizeof(uuid), &uuid_e); + d_printf(6, dev, "From D1 frame:\n" + "UUID-E: %s\n" + "Selection method: %d\n" + "Device name (%d bytes): %s\n" + "Model name (%d bytes): %s\n" + "Manufacturer (%d bytes): %s\n" + "Model number (%d bytes): %s\n" + "Serial number (%d bytes): %s\n" + "Primary device type: \n" + " Category: %d \n" + " OUI: %02x:%02x:%02x \n" + " OUI Subdivision: %u \n", + uuid, sel_mthd, + (int)strlen(dev_info.name), dev_info.name, + (int)strlen(dev_info.model_name), dev_info.model_name, + (int)strlen(dev_info.manufacturer), dev_info.manufacturer, + (int)strlen(dev_info.model_nr), dev_info.model_nr, + (int)strlen(dev_info.serial), dev_info.serial, + dev_info.prim_dev_type.category, + dev_info.prim_dev_type.OUI[0], + dev_info.prim_dev_type.OUI[1], + dev_info.prim_dev_type.OUI[2], + dev_info.prim_dev_type.OUIsubdiv); + + kfree_skb(skb); + if (!wlp_uuid_is_set(&wlp->uuid)) { + dev_err(dev, "WLP: UUID is not set. Set via sysfs to " + "proceed. Respong to D1 message with error F0.\n"); + result = wlp_build_assoc_f0(wlp, &resp, + WLP_ASSOC_ERROR_NOT_READY); + if (result < 0) { + dev_err(dev, "WLP: Unable to construct F0 message.\n"); + goto out; + } + } else { + /* Construct D2 frame */ + result = wlp_build_assoc_d2(wlp, wss, &resp, &uuid_e); + if (result < 0) { + dev_err(dev, "WLP: Unable to construct D2 message.\n"); + goto out; + } + } + /* Send D2 frame */ + BUG_ON(wlp->xmit_frame == NULL); + result = wlp->xmit_frame(wlp, resp, src); + if (result < 0) { + dev_err(dev, "WLP: Unable to transmit D2 association " + "message: %d\n", result); + if (result == -ENXIO) + dev_err(dev, "WLP: Is network interface up? \n"); + /* We could try again ... */ + dev_kfree_skb_any(resp); /* we need to free if tx fails */ + } +out: + kfree(frame_ctx); + mutex_unlock(&wlp->mutex); + mutex_unlock(&wss->mutex); + d_fnend(6, dev, "WLP: handle D1 frame. wlp = %p\n", wlp); +} + +/** + * Parse incoming D2 frame, create and populate temporary cache + * + * @skb: socket buffer in which D2 frame can be found + * @neighbor: the neighbor that sent the D2 frame + * + * Will allocate memory for temporary storage of information learned during + * discovery. + */ +int wlp_parse_d2_frame_to_cache(struct wlp *wlp, struct sk_buff *skb, + struct wlp_neighbor_e *neighbor) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_frame_assoc *d2 = (void *) skb->data; + void *ptr = skb->data; + size_t len = skb->len; + size_t used; + ssize_t result; + struct wlp_uuid uuid_e; + struct wlp_device_info *nb_info; + enum wlp_assc_error assc_err; + + used = sizeof(*d2); + result = wlp_get_uuid_e(wlp, ptr + used, &uuid_e, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain UUID-E attribute from D2 " + "message.\n"); + goto error_parse; + } + if (memcmp(&uuid_e, &wlp->uuid, sizeof(uuid_e))) { + dev_err(dev, "WLP: UUID-E in incoming D2 does not match " + "local UUID sent in D1. \n"); + goto error_parse; + } + used += result; + result = wlp_get_uuid_r(wlp, ptr + used, &neighbor->uuid, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain UUID-R attribute from D2 " + "message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_wss_info_to_cache(wlp, ptr + used, neighbor, + len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSS information " + "from D2 message.\n"); + goto error_parse; + } + used += result; + neighbor->info = kzalloc(sizeof(struct wlp_device_info), GFP_KERNEL); + if (neighbor->info == NULL) { + dev_err(dev, "WLP: cannot allocate memory to store device " + "info.\n"); + result = -ENOMEM; + goto error_parse; + } + nb_info = neighbor->info; + result = wlp_get_dev_name(wlp, ptr + used, nb_info->name, + len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Device Name from D2 " + "message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_variable_info(wlp, ptr + used, nb_info, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Device Information from " + "D2 message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_wlp_assc_err(wlp, ptr + used, &assc_err, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WLP Association Error " + "Information from D2 message.\n"); + goto error_parse; + } + if (assc_err != WLP_ASSOC_ERROR_NONE) { + dev_err(dev, "WLP: neighbor device returned association " + "error %d\n", assc_err); + result = -EINVAL; + goto error_parse; + } + result = 0; +error_parse: + if (result < 0) + wlp_remove_neighbor_tmp_info(neighbor); + return result; +} + +/** + * Parse incoming D2 frame, populate attribute values of WSS bein enrolled in + * + * @wss: our WSS that will be enrolled + * @skb: socket buffer in which D2 frame can be found + * @neighbor: the neighbor that sent the D2 frame + * @wssid: the wssid of the WSS in which we want to enroll + * + * Forms part of enrollment sequence. We are trying to enroll in WSS with + * @wssid by using @neighbor as registrar. A D1 message was sent to + * @neighbor and now we need to parse the D2 response. The neighbor's + * response is searched for the requested WSS and if found (and it accepts + * enrollment), we store the information. + */ +int wlp_parse_d2_frame_to_enroll(struct wlp_wss *wss, struct sk_buff *skb, + struct wlp_neighbor_e *neighbor, + struct wlp_uuid *wssid) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + void *ptr = skb->data; + size_t len = skb->len; + size_t used; + ssize_t result; + struct wlp_uuid uuid_e; + struct wlp_uuid uuid_r; + struct wlp_device_info nb_info; + enum wlp_assc_error assc_err; + char uuid_bufA[WLP_WSS_UUID_STRSIZE]; + char uuid_bufB[WLP_WSS_UUID_STRSIZE]; + + used = sizeof(struct wlp_frame_assoc); + result = wlp_get_uuid_e(wlp, ptr + used, &uuid_e, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain UUID-E attribute from D2 " + "message.\n"); + goto error_parse; + } + if (memcmp(&uuid_e, &wlp->uuid, sizeof(uuid_e))) { + dev_err(dev, "WLP: UUID-E in incoming D2 does not match " + "local UUID sent in D1. \n"); + goto error_parse; + } + used += result; + result = wlp_get_uuid_r(wlp, ptr + used, &uuid_r, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain UUID-R attribute from D2 " + "message.\n"); + goto error_parse; + } + if (memcmp(&uuid_r, &neighbor->uuid, sizeof(uuid_r))) { + wlp_wss_uuid_print(uuid_bufA, sizeof(uuid_bufA), + &neighbor->uuid); + wlp_wss_uuid_print(uuid_bufB, sizeof(uuid_bufB), &uuid_r); + dev_err(dev, "WLP: UUID of neighbor does not match UUID " + "learned during discovery. Originally discovered: %s, " + "now from D2 message: %s\n", uuid_bufA, uuid_bufB); + result = -EINVAL; + goto error_parse; + } + used += result; + wss->wssid = *wssid; + result = wlp_get_wss_info_to_enroll(wlp, ptr + used, wss, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSS information " + "from D2 message.\n"); + goto error_parse; + } + if (wss->state != WLP_WSS_STATE_PART_ENROLLED) { + dev_err(dev, "WLP: D2 message did not contain information " + "for successful enrollment. \n"); + result = -EINVAL; + goto error_parse; + } + used += result; + /* Place device information on stack to continue parsing of message */ + result = wlp_get_dev_name(wlp, ptr + used, nb_info.name, + len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Device Name from D2 " + "message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_variable_info(wlp, ptr + used, &nb_info, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain Device Information from " + "D2 message.\n"); + goto error_parse; + } + used += result; + result = wlp_get_wlp_assc_err(wlp, ptr + used, &assc_err, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WLP Association Error " + "Information from D2 message.\n"); + goto error_parse; + } + if (assc_err != WLP_ASSOC_ERROR_NONE) { + dev_err(dev, "WLP: neighbor device returned association " + "error %d\n", assc_err); + if (wss->state == WLP_WSS_STATE_PART_ENROLLED) { + dev_err(dev, "WLP: Enrolled in WSS (should not " + "happen according to spec). Undoing. \n"); + wlp_wss_reset(wss); + } + result = -EINVAL; + goto error_parse; + } + result = 0; +error_parse: + return result; +} + +/** + * Parse C3/C4 frame into provided variables + * + * @wssid: will point to copy of wssid retrieved from C3/C4 frame + * @tag: will point to copy of tag retrieved from C3/C4 frame + * @virt_addr: will point to copy of virtual address retrieved from C3/C4 + * frame. + * + * Calling function has to allocate memory for these values. + * + * skb contains a valid C3/C4 frame, return the individual fields of this + * frame in the provided variables. + */ +int wlp_parse_c3c4_frame(struct wlp *wlp, struct sk_buff *skb, + struct wlp_uuid *wssid, u8 *tag, + struct uwb_mac_addr *virt_addr) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + int result; + void *ptr = skb->data; + size_t len = skb->len; + size_t used; + char buf[WLP_WSS_UUID_STRSIZE]; + struct wlp_frame_assoc *assoc = ptr; + + d_fnstart(6, dev, "wlp %p, skb %p \n", wlp, skb); + used = sizeof(*assoc); + result = wlp_get_wssid(wlp, ptr + used, wssid, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSSID attribute from " + "%s message.\n", wlp_assoc_frame_str(assoc->type)); + goto error_parse; + } + used += result; + result = wlp_get_wss_tag(wlp, ptr + used, tag, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSS tag attribute from " + "%s message.\n", wlp_assoc_frame_str(assoc->type)); + goto error_parse; + } + used += result; + result = wlp_get_wss_virt(wlp, ptr + used, virt_addr, len - used); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSS virtual address " + "attribute from %s message.\n", + wlp_assoc_frame_str(assoc->type)); + goto error_parse; + } + wlp_wss_uuid_print(buf, sizeof(buf), wssid); + d_printf(6, dev, "WLP: parsed: WSSID %s, tag 0x%02x, virt " + "%02x:%02x:%02x:%02x:%02x:%02x \n", buf, *tag, + virt_addr->data[0], virt_addr->data[1], virt_addr->data[2], + virt_addr->data[3], virt_addr->data[4], virt_addr->data[5]); + +error_parse: + d_fnend(6, dev, "wlp %p, skb %p, result = %d \n", wlp, skb, result); + return result; +} + +/** + * Allocate memory for and populate fields of C1 or C2 association frame + * + * The C1 and C2 association frames appear identical - except for the type. + */ +static +int wlp_build_assoc_c1c2(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb, enum wlp_assoc_type type) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = -ENOMEM; + struct { + struct wlp_frame_assoc c_hdr; + struct wlp_attr_wssid wssid; + } *c; + struct sk_buff *_skb; + + d_fnstart(6, dev, "wlp %p, wss %p \n", wlp, wss); + _skb = dev_alloc_skb(sizeof(*c)); + if (_skb == NULL) { + dev_err(dev, "WLP: Unable to allocate memory for C1/C2 " + "association frame. \n"); + goto error_alloc; + } + c = (void *) _skb->data; + d_printf(6, dev, "C1/C2 starts at %p \n", c); + c->c_hdr.hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); + c->c_hdr.hdr.type = WLP_FRAME_ASSOCIATION; + c->c_hdr.type = type; + wlp_set_version(&c->c_hdr.version, WLP_VERSION); + wlp_set_msg_type(&c->c_hdr.msg_type, type); + wlp_set_wssid(&c->wssid, &wss->wssid); + skb_put(_skb, sizeof(*c)); + d_printf(6, dev, "C1/C2 message:\n"); + d_dump(6, dev, c, sizeof(*c)); + *skb = _skb; + result = 0; +error_alloc: + d_fnend(6, dev, "wlp %p, wss %p, result %d \n", wlp, wss, result); + return result; +} + + +static +int wlp_build_assoc_c1(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb) +{ + return wlp_build_assoc_c1c2(wlp, wss, skb, WLP_ASSOC_C1); +} + +static +int wlp_build_assoc_c2(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb) +{ + return wlp_build_assoc_c1c2(wlp, wss, skb, WLP_ASSOC_C2); +} + + +/** + * Allocate memory for and populate fields of C3 or C4 association frame + * + * The C3 and C4 association frames appear identical - except for the type. + */ +static +int wlp_build_assoc_c3c4(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb, enum wlp_assoc_type type) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = -ENOMEM; + struct { + struct wlp_frame_assoc c_hdr; + struct wlp_attr_wssid wssid; + struct wlp_attr_wss_tag wss_tag; + struct wlp_attr_wss_virt wss_virt; + } *c; + struct sk_buff *_skb; + + d_fnstart(6, dev, "wlp %p, wss %p \n", wlp, wss); + _skb = dev_alloc_skb(sizeof(*c)); + if (_skb == NULL) { + dev_err(dev, "WLP: Unable to allocate memory for C3/C4 " + "association frame. \n"); + goto error_alloc; + } + c = (void *) _skb->data; + d_printf(6, dev, "C3/C4 starts at %p \n", c); + c->c_hdr.hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); + c->c_hdr.hdr.type = WLP_FRAME_ASSOCIATION; + c->c_hdr.type = type; + wlp_set_version(&c->c_hdr.version, WLP_VERSION); + wlp_set_msg_type(&c->c_hdr.msg_type, type); + wlp_set_wssid(&c->wssid, &wss->wssid); + wlp_set_wss_tag(&c->wss_tag, wss->tag); + wlp_set_wss_virt(&c->wss_virt, &wss->virtual_addr); + skb_put(_skb, sizeof(*c)); + d_printf(6, dev, "C3/C4 message:\n"); + d_dump(6, dev, c, sizeof(*c)); + *skb = _skb; + result = 0; +error_alloc: + d_fnend(6, dev, "wlp %p, wss %p, result %d \n", wlp, wss, result); + return result; +} + +static +int wlp_build_assoc_c3(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb) +{ + return wlp_build_assoc_c3c4(wlp, wss, skb, WLP_ASSOC_C3); +} + +static +int wlp_build_assoc_c4(struct wlp *wlp, struct wlp_wss *wss, + struct sk_buff **skb) +{ + return wlp_build_assoc_c3c4(wlp, wss, skb, WLP_ASSOC_C4); +} + + +#define wlp_send_assoc(type, id) \ +static int wlp_send_assoc_##type(struct wlp *wlp, struct wlp_wss *wss, \ + struct uwb_dev_addr *dev_addr) \ +{ \ + struct device *dev = &wlp->rc->uwb_dev.dev; \ + int result; \ + struct sk_buff *skb = NULL; \ + d_fnstart(6, dev, "wlp %p, wss %p, neighbor: %02x:%02x\n", \ + wlp, wss, dev_addr->data[1], dev_addr->data[0]); \ + d_printf(6, dev, "WLP: Constructing %s frame. \n", \ + wlp_assoc_frame_str(id)); \ + /* Build the frame */ \ + result = wlp_build_assoc_##type(wlp, wss, &skb); \ + if (result < 0) { \ + dev_err(dev, "WLP: Unable to construct %s association " \ + "frame: %d\n", wlp_assoc_frame_str(id), result);\ + goto error_build_assoc; \ + } \ + /* Send the frame */ \ + d_printf(6, dev, "Transmitting %s frame to %02x:%02x \n", \ + wlp_assoc_frame_str(id), \ + dev_addr->data[1], dev_addr->data[0]); \ + BUG_ON(wlp->xmit_frame == NULL); \ + result = wlp->xmit_frame(wlp, skb, dev_addr); \ + if (result < 0) { \ + dev_err(dev, "WLP: Unable to transmit %s association " \ + "message: %d\n", wlp_assoc_frame_str(id), \ + result); \ + if (result == -ENXIO) \ + dev_err(dev, "WLP: Is network interface " \ + "up? \n"); \ + goto error_xmit; \ + } \ + return 0; \ +error_xmit: \ + /* We could try again ... */ \ + dev_kfree_skb_any(skb);/*we need to free if tx fails*/ \ +error_build_assoc: \ + d_fnend(6, dev, "wlp %p, wss %p, neighbor: %02x:%02x\n", \ + wlp, wss, dev_addr->data[1], dev_addr->data[0]); \ + return result; \ +} + +wlp_send_assoc(d1, WLP_ASSOC_D1) +wlp_send_assoc(c1, WLP_ASSOC_C1) +wlp_send_assoc(c3, WLP_ASSOC_C3) + +int wlp_send_assoc_frame(struct wlp *wlp, struct wlp_wss *wss, + struct uwb_dev_addr *dev_addr, + enum wlp_assoc_type type) +{ + int result = 0; + struct device *dev = &wlp->rc->uwb_dev.dev; + switch (type) { + case WLP_ASSOC_D1: + result = wlp_send_assoc_d1(wlp, wss, dev_addr); + break; + case WLP_ASSOC_C1: + result = wlp_send_assoc_c1(wlp, wss, dev_addr); + break; + case WLP_ASSOC_C3: + result = wlp_send_assoc_c3(wlp, wss, dev_addr); + break; + default: + dev_err(dev, "WLP: Received request to send unknown " + "association message.\n"); + result = -EINVAL; + break; + } + return result; +} + +/** + * Handle incoming C1 frame + * + * The frame has already been verified to contain an Association header with + * the correct version number. Parse the incoming frame, construct and send + * a C2 frame in response. + */ +void wlp_handle_c1_frame(struct work_struct *ws) +{ + struct wlp_assoc_frame_ctx *frame_ctx = container_of(ws, + struct wlp_assoc_frame_ctx, + ws); + struct wlp *wlp = frame_ctx->wlp; + struct wlp_wss *wss = &wlp->wss; + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_frame_assoc *c1 = (void *) frame_ctx->skb->data; + unsigned int len = frame_ctx->skb->len; + struct uwb_dev_addr *src = &frame_ctx->src; + int result; + struct wlp_uuid wssid; + char buf[WLP_WSS_UUID_STRSIZE]; + struct sk_buff *resp = NULL; + + /* Parse C1 frame */ + d_fnstart(6, dev, "WLP: handle C1 frame. wlp = %p, c1 = %p\n", + wlp, c1); + mutex_lock(&wss->mutex); + result = wlp_get_wssid(wlp, (void *)c1 + sizeof(*c1), &wssid, + len - sizeof(*c1)); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSSID from C1 frame.\n"); + goto out; + } + wlp_wss_uuid_print(buf, sizeof(buf), &wssid); + d_printf(6, dev, "Received C1 frame with WSSID %s \n", buf); + if (!memcmp(&wssid, &wss->wssid, sizeof(wssid)) + && wss->state == WLP_WSS_STATE_ACTIVE) { + d_printf(6, dev, "WSSID from C1 frame is known locally " + "and is active\n"); + /* Construct C2 frame */ + result = wlp_build_assoc_c2(wlp, wss, &resp); + if (result < 0) { + dev_err(dev, "WLP: Unable to construct C2 message.\n"); + goto out; + } + } else { + d_printf(6, dev, "WSSID from C1 frame is not known locally " + "or is not active\n"); + /* Construct F0 frame */ + result = wlp_build_assoc_f0(wlp, &resp, WLP_ASSOC_ERROR_INV); + if (result < 0) { + dev_err(dev, "WLP: Unable to construct F0 message.\n"); + goto out; + } + } + /* Send C2 frame */ + d_printf(6, dev, "Transmitting response (C2/F0) frame to %02x:%02x \n", + src->data[1], src->data[0]); + BUG_ON(wlp->xmit_frame == NULL); + result = wlp->xmit_frame(wlp, resp, src); + if (result < 0) { + dev_err(dev, "WLP: Unable to transmit response association " + "message: %d\n", result); + if (result == -ENXIO) + dev_err(dev, "WLP: Is network interface up? \n"); + /* We could try again ... */ + dev_kfree_skb_any(resp); /* we need to free if tx fails */ + } +out: + kfree_skb(frame_ctx->skb); + kfree(frame_ctx); + mutex_unlock(&wss->mutex); + d_fnend(6, dev, "WLP: handle C1 frame. wlp = %p\n", wlp); +} + +/** + * Handle incoming C3 frame + * + * The frame has already been verified to contain an Association header with + * the correct version number. Parse the incoming frame, construct and send + * a C4 frame in response. If the C3 frame identifies a WSS that is locally + * active then we connect to this neighbor (add it to our EDA cache). + */ +void wlp_handle_c3_frame(struct work_struct *ws) +{ + struct wlp_assoc_frame_ctx *frame_ctx = container_of(ws, + struct wlp_assoc_frame_ctx, + ws); + struct wlp *wlp = frame_ctx->wlp; + struct wlp_wss *wss = &wlp->wss; + struct device *dev = &wlp->rc->uwb_dev.dev; + struct sk_buff *skb = frame_ctx->skb; + struct uwb_dev_addr *src = &frame_ctx->src; + int result; + char buf[WLP_WSS_UUID_STRSIZE]; + struct sk_buff *resp = NULL; + struct wlp_uuid wssid; + u8 tag; + struct uwb_mac_addr virt_addr; + + /* Parse C3 frame */ + d_fnstart(6, dev, "WLP: handle C3 frame. wlp = %p, skb = %p\n", + wlp, skb); + mutex_lock(&wss->mutex); + result = wlp_parse_c3c4_frame(wlp, skb, &wssid, &tag, &virt_addr); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain values from C3 frame.\n"); + goto out; + } + wlp_wss_uuid_print(buf, sizeof(buf), &wssid); + d_printf(6, dev, "Received C3 frame with WSSID %s \n", buf); + if (!memcmp(&wssid, &wss->wssid, sizeof(wssid)) + && wss->state >= WLP_WSS_STATE_ACTIVE) { + d_printf(6, dev, "WSSID from C3 frame is known locally " + "and is active\n"); + result = wlp_eda_update_node(&wlp->eda, src, wss, + (void *) virt_addr.data, tag, + WLP_WSS_CONNECTED); + if (result < 0) { + dev_err(dev, "WLP: Unable to update EDA cache " + "with new connected neighbor information.\n"); + result = wlp_build_assoc_f0(wlp, &resp, + WLP_ASSOC_ERROR_INT); + if (result < 0) { + dev_err(dev, "WLP: Unable to construct F0 " + "message.\n"); + goto out; + } + } else { + wss->state = WLP_WSS_STATE_CONNECTED; + /* Construct C4 frame */ + result = wlp_build_assoc_c4(wlp, wss, &resp); + if (result < 0) { + dev_err(dev, "WLP: Unable to construct C4 " + "message.\n"); + goto out; + } + } + } else { + d_printf(6, dev, "WSSID from C3 frame is not known locally " + "or is not active\n"); + /* Construct F0 frame */ + result = wlp_build_assoc_f0(wlp, &resp, WLP_ASSOC_ERROR_INV); + if (result < 0) { + dev_err(dev, "WLP: Unable to construct F0 message.\n"); + goto out; + } + } + /* Send C4 frame */ + d_printf(6, dev, "Transmitting response (C4/F0) frame to %02x:%02x \n", + src->data[1], src->data[0]); + BUG_ON(wlp->xmit_frame == NULL); + result = wlp->xmit_frame(wlp, resp, src); + if (result < 0) { + dev_err(dev, "WLP: Unable to transmit response association " + "message: %d\n", result); + if (result == -ENXIO) + dev_err(dev, "WLP: Is network interface up? \n"); + /* We could try again ... */ + dev_kfree_skb_any(resp); /* we need to free if tx fails */ + } +out: + kfree_skb(frame_ctx->skb); + kfree(frame_ctx); + mutex_unlock(&wss->mutex); + d_fnend(6, dev, "WLP: handle C3 frame. wlp = %p, skb = %p\n", + wlp, skb); +} + + diff --git a/drivers/uwb/wlp/sysfs.c b/drivers/uwb/wlp/sysfs.c new file mode 100644 index 000000000000..1bb9b1f97d47 --- /dev/null +++ b/drivers/uwb/wlp/sysfs.c @@ -0,0 +1,709 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * sysfs functions + * + * Copyright (C) 2007 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: Docs + * + */ + +#include <linux/wlp.h> +#include "wlp-internal.h" + +static +size_t wlp_wss_wssid_e_print(char *buf, size_t bufsize, + struct wlp_wssid_e *wssid_e) +{ + size_t used = 0; + used += scnprintf(buf, bufsize, " WSS: "); + used += wlp_wss_uuid_print(buf + used, bufsize - used, + &wssid_e->wssid); + + if (wssid_e->info != NULL) { + used += scnprintf(buf + used, bufsize - used, " "); + used += uwb_mac_addr_print(buf + used, bufsize - used, + &wssid_e->info->bcast); + used += scnprintf(buf + used, bufsize - used, " %u %u %s\n", + wssid_e->info->accept_enroll, + wssid_e->info->sec_status, + wssid_e->info->name); + } + return used; +} + +/** + * Print out information learned from neighbor discovery + * + * Some fields being printed may not be included in the device discovery + * information (it is not mandatory). We are thus careful how the + * information is printed to ensure it is clear to the user what field is + * being referenced. + * The information being printed is for one time use - temporary storage is + * cleaned after it is printed. + * + * Ideally sysfs output should be on one line. The information printed here + * contain a few strings so it will be hard to parse if they are all + * printed on the same line - without agreeing on a standard field + * separator. + */ +static +ssize_t wlp_wss_neighborhood_print_remove(struct wlp *wlp, char *buf, + size_t bufsize) +{ + size_t used = 0; + struct wlp_neighbor_e *neighb; + struct wlp_wssid_e *wssid_e; + + mutex_lock(&wlp->nbmutex); + used = scnprintf(buf, bufsize, "#Neighbor information\n" + "#uuid dev_addr\n" + "# Device Name:\n# Model Name:\n# Manufacturer:\n" + "# Model Nr:\n# Serial:\n" + "# Pri Dev type: CategoryID OUI OUISubdiv " + "SubcategoryID\n" + "# WSS: WSSID WSS_name accept_enroll sec_status " + "bcast\n" + "# WSS: WSSID WSS_name accept_enroll sec_status " + "bcast\n\n"); + list_for_each_entry(neighb, &wlp->neighbors, node) { + if (bufsize - used <= 0) + goto out; + used += wlp_wss_uuid_print(buf + used, bufsize - used, + &neighb->uuid); + buf[used++] = ' '; + used += uwb_dev_addr_print(buf + used, bufsize - used, + &neighb->uwb_dev->dev_addr); + if (neighb->info != NULL) + used += scnprintf(buf + used, bufsize - used, + "\n Device Name: %s\n" + " Model Name: %s\n" + " Manufacturer:%s \n" + " Model Nr: %s\n" + " Serial: %s\n" + " Pri Dev type: " + "%u %02x:%02x:%02x %u %u\n", + neighb->info->name, + neighb->info->model_name, + neighb->info->manufacturer, + neighb->info->model_nr, + neighb->info->serial, + neighb->info->prim_dev_type.category, + neighb->info->prim_dev_type.OUI[0], + neighb->info->prim_dev_type.OUI[1], + neighb->info->prim_dev_type.OUI[2], + neighb->info->prim_dev_type.OUIsubdiv, + neighb->info->prim_dev_type.subID); + list_for_each_entry(wssid_e, &neighb->wssid, node) { + used += wlp_wss_wssid_e_print(buf + used, + bufsize - used, + wssid_e); + } + buf[used++] = '\n'; + wlp_remove_neighbor_tmp_info(neighb); + } + + +out: + mutex_unlock(&wlp->nbmutex); + return used; +} + + +/** + * Show properties of all WSS in neighborhood. + * + * Will trigger a complete discovery of WSS activated by this device and + * its neighbors. + */ +ssize_t wlp_neighborhood_show(struct wlp *wlp, char *buf) +{ + wlp_discover(wlp); + return wlp_wss_neighborhood_print_remove(wlp, buf, PAGE_SIZE); +} +EXPORT_SYMBOL_GPL(wlp_neighborhood_show); + +static +ssize_t __wlp_wss_properties_show(struct wlp_wss *wss, char *buf, + size_t bufsize) +{ + ssize_t result; + + result = wlp_wss_uuid_print(buf, bufsize, &wss->wssid); + result += scnprintf(buf + result, bufsize - result, " "); + result += uwb_mac_addr_print(buf + result, bufsize - result, + &wss->bcast); + result += scnprintf(buf + result, bufsize - result, + " 0x%02x %u ", wss->hash, wss->secure_status); + result += wlp_wss_key_print(buf + result, bufsize - result, + wss->master_key); + result += scnprintf(buf + result, bufsize - result, " 0x%02x ", + wss->tag); + result += uwb_mac_addr_print(buf + result, bufsize - result, + &wss->virtual_addr); + result += scnprintf(buf + result, bufsize - result, " %s", wss->name); + result += scnprintf(buf + result, bufsize - result, + "\n\n#WSSID\n#WSS broadcast address\n" + "#WSS hash\n#WSS secure status\n" + "#WSS master key\n#WSS local tag\n" + "#WSS local virtual EUI-48\n#WSS name\n"); + return result; +} + +/** + * Show which WSS is activated. + */ +ssize_t wlp_wss_activate_show(struct wlp_wss *wss, char *buf) +{ + int result = 0; + + if (mutex_lock_interruptible(&wss->mutex)) + goto out; + if (wss->state >= WLP_WSS_STATE_ACTIVE) + result = __wlp_wss_properties_show(wss, buf, PAGE_SIZE); + else + result = scnprintf(buf, PAGE_SIZE, "No local WSS active.\n"); + result += scnprintf(buf + result, PAGE_SIZE - result, + "\n\n" + "# echo WSSID SECURE_STATUS ACCEPT_ENROLLMENT " + "NAME #create new WSS\n" + "# echo WSSID [DEV ADDR] #enroll in and activate " + "existing WSS, can request registrar\n" + "#\n" + "# WSSID is a 16 byte hex array. Eg. 12 A3 3B ... \n" + "# SECURE_STATUS 0 - unsecure, 1 - secure (default)\n" + "# ACCEPT_ENROLLMENT 0 - no, 1 - yes (default)\n" + "# NAME is the text string identifying the WSS\n" + "# DEV ADDR is the device address of neighbor " + "that should be registrar. Eg. 32:AB\n"); + + mutex_unlock(&wss->mutex); +out: + return result; + +} +EXPORT_SYMBOL_GPL(wlp_wss_activate_show); + +/** + * Create/activate a new WSS or enroll/activate in neighboring WSS + * + * The user can provide the WSSID of a WSS in which it wants to enroll. + * Only the WSSID is necessary if the WSS have been discovered before. If + * the WSS has not been discovered before, or the user wants to use a + * particular neighbor as its registrar, then the user can also provide a + * device address or the neighbor that will be used as registrar. + * + * A new WSS is created when the user provides a WSSID, secure status, and + * WSS name. + */ +ssize_t wlp_wss_activate_store(struct wlp_wss *wss, + const char *buf, size_t size) +{ + ssize_t result = -EINVAL; + struct wlp_uuid wssid; + struct uwb_dev_addr dev; + struct uwb_dev_addr bcast = {.data = {0xff, 0xff} }; + char name[65]; + unsigned sec_status, accept; + memset(name, 0, sizeof(name)); + result = sscanf(buf, "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx:%02hhx", + &wssid.data[0] , &wssid.data[1], + &wssid.data[2] , &wssid.data[3], + &wssid.data[4] , &wssid.data[5], + &wssid.data[6] , &wssid.data[7], + &wssid.data[8] , &wssid.data[9], + &wssid.data[10], &wssid.data[11], + &wssid.data[12], &wssid.data[13], + &wssid.data[14], &wssid.data[15], + &dev.data[1], &dev.data[0]); + if (result == 16 || result == 17) { + result = sscanf(buf, "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%u %u %64c", + &wssid.data[0] , &wssid.data[1], + &wssid.data[2] , &wssid.data[3], + &wssid.data[4] , &wssid.data[5], + &wssid.data[6] , &wssid.data[7], + &wssid.data[8] , &wssid.data[9], + &wssid.data[10], &wssid.data[11], + &wssid.data[12], &wssid.data[13], + &wssid.data[14], &wssid.data[15], + &sec_status, &accept, name); + if (result == 16) + result = wlp_wss_enroll_activate(wss, &wssid, &bcast); + else if (result == 19) { + sec_status = sec_status == 0 ? 0 : 1; + accept = accept == 0 ? 0 : 1; + /* We read name using %c, so the newline needs to be + * removed */ + if (strlen(name) != sizeof(name) - 1) + name[strlen(name) - 1] = '\0'; + result = wlp_wss_create_activate(wss, &wssid, name, + sec_status, accept); + } else + result = -EINVAL; + } else if (result == 18) + result = wlp_wss_enroll_activate(wss, &wssid, &dev); + else + result = -EINVAL; + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_wss_activate_store); + +/** + * Show the UUID of this host + */ +ssize_t wlp_uuid_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + + mutex_lock(&wlp->mutex); + result = wlp_wss_uuid_print(buf, PAGE_SIZE, &wlp->uuid); + buf[result++] = '\n'; + mutex_unlock(&wlp->mutex); + return result; +} +EXPORT_SYMBOL_GPL(wlp_uuid_show); + +/** + * Store a new UUID for this host + * + * According to the spec this should be encoded as an octet string in the + * order the octets are shown in string representation in RFC 4122 (WLP + * 0.99 [Table 6]) + * + * We do not check value provided by user. + */ +ssize_t wlp_uuid_store(struct wlp *wlp, const char *buf, size_t size) +{ + ssize_t result; + struct wlp_uuid uuid; + + mutex_lock(&wlp->mutex); + result = sscanf(buf, "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx " + "%02hhx %02hhx %02hhx %02hhx ", + &uuid.data[0] , &uuid.data[1], + &uuid.data[2] , &uuid.data[3], + &uuid.data[4] , &uuid.data[5], + &uuid.data[6] , &uuid.data[7], + &uuid.data[8] , &uuid.data[9], + &uuid.data[10], &uuid.data[11], + &uuid.data[12], &uuid.data[13], + &uuid.data[14], &uuid.data[15]); + if (result != 16) { + result = -EINVAL; + goto error; + } + wlp->uuid = uuid; +error: + mutex_unlock(&wlp->mutex); + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_uuid_store); + +/** + * Show contents of members of device information structure + */ +#define wlp_dev_info_show(type) \ +ssize_t wlp_dev_##type##_show(struct wlp *wlp, char *buf) \ +{ \ + ssize_t result = 0; \ + mutex_lock(&wlp->mutex); \ + if (wlp->dev_info == NULL) { \ + result = __wlp_setup_device_info(wlp); \ + if (result < 0) \ + goto out; \ + } \ + result = scnprintf(buf, PAGE_SIZE, "%s\n", wlp->dev_info->type);\ +out: \ + mutex_unlock(&wlp->mutex); \ + return result; \ +} \ +EXPORT_SYMBOL_GPL(wlp_dev_##type##_show); + +wlp_dev_info_show(name) +wlp_dev_info_show(model_name) +wlp_dev_info_show(model_nr) +wlp_dev_info_show(manufacturer) +wlp_dev_info_show(serial) + +/** + * Store contents of members of device information structure + */ +#define wlp_dev_info_store(type, len) \ +ssize_t wlp_dev_##type##_store(struct wlp *wlp, const char *buf, size_t size)\ +{ \ + ssize_t result; \ + char format[10]; \ + mutex_lock(&wlp->mutex); \ + if (wlp->dev_info == NULL) { \ + result = __wlp_alloc_device_info(wlp); \ + if (result < 0) \ + goto out; \ + } \ + memset(wlp->dev_info->type, 0, sizeof(wlp->dev_info->type)); \ + sprintf(format, "%%%uc", len); \ + result = sscanf(buf, format, wlp->dev_info->type); \ +out: \ + mutex_unlock(&wlp->mutex); \ + return result < 0 ? result : size; \ +} \ +EXPORT_SYMBOL_GPL(wlp_dev_##type##_store); + +wlp_dev_info_store(name, 32) +wlp_dev_info_store(manufacturer, 64) +wlp_dev_info_store(model_name, 32) +wlp_dev_info_store(model_nr, 32) +wlp_dev_info_store(serial, 32) + +static +const char *__wlp_dev_category[] = { + [WLP_DEV_CAT_COMPUTER] = "Computer", + [WLP_DEV_CAT_INPUT] = "Input device", + [WLP_DEV_CAT_PRINT_SCAN_FAX_COPIER] = "Printer, scanner, FAX, or " + "Copier", + [WLP_DEV_CAT_CAMERA] = "Camera", + [WLP_DEV_CAT_STORAGE] = "Storage Network", + [WLP_DEV_CAT_INFRASTRUCTURE] = "Infrastructure", + [WLP_DEV_CAT_DISPLAY] = "Display", + [WLP_DEV_CAT_MULTIM] = "Multimedia device", + [WLP_DEV_CAT_GAMING] = "Gaming device", + [WLP_DEV_CAT_TELEPHONE] = "Telephone", + [WLP_DEV_CAT_OTHER] = "Other", +}; + +static +const char *wlp_dev_category_str(unsigned cat) +{ + if ((cat >= WLP_DEV_CAT_COMPUTER && cat <= WLP_DEV_CAT_TELEPHONE) + || cat == WLP_DEV_CAT_OTHER) + return __wlp_dev_category[cat]; + return "unknown category"; +} + +ssize_t wlp_dev_prim_category_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_setup_device_info(wlp); + if (result < 0) + goto out; + } + result = scnprintf(buf, PAGE_SIZE, "%s\n", + wlp_dev_category_str(wlp->dev_info->prim_dev_type.category)); +out: + mutex_unlock(&wlp->mutex); + return result; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_category_show); + +ssize_t wlp_dev_prim_category_store(struct wlp *wlp, const char *buf, + size_t size) +{ + ssize_t result; + u16 cat; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_alloc_device_info(wlp); + if (result < 0) + goto out; + } + result = sscanf(buf, "%hu", &cat); + if ((cat >= WLP_DEV_CAT_COMPUTER && cat <= WLP_DEV_CAT_TELEPHONE) + || cat == WLP_DEV_CAT_OTHER) + wlp->dev_info->prim_dev_type.category = cat; + else + result = -EINVAL; +out: + mutex_unlock(&wlp->mutex); + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_category_store); + +ssize_t wlp_dev_prim_OUI_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_setup_device_info(wlp); + if (result < 0) + goto out; + } + result = scnprintf(buf, PAGE_SIZE, "%02x:%02x:%02x\n", + wlp->dev_info->prim_dev_type.OUI[0], + wlp->dev_info->prim_dev_type.OUI[1], + wlp->dev_info->prim_dev_type.OUI[2]); +out: + mutex_unlock(&wlp->mutex); + return result; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_show); + +ssize_t wlp_dev_prim_OUI_store(struct wlp *wlp, const char *buf, size_t size) +{ + ssize_t result; + u8 OUI[3]; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_alloc_device_info(wlp); + if (result < 0) + goto out; + } + result = sscanf(buf, "%hhx:%hhx:%hhx", + &OUI[0], &OUI[1], &OUI[2]); + if (result != 3) { + result = -EINVAL; + goto out; + } else + memcpy(wlp->dev_info->prim_dev_type.OUI, OUI, sizeof(OUI)); +out: + mutex_unlock(&wlp->mutex); + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_store); + + +ssize_t wlp_dev_prim_OUI_sub_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_setup_device_info(wlp); + if (result < 0) + goto out; + } + result = scnprintf(buf, PAGE_SIZE, "%u\n", + wlp->dev_info->prim_dev_type.OUIsubdiv); +out: + mutex_unlock(&wlp->mutex); + return result; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_sub_show); + +ssize_t wlp_dev_prim_OUI_sub_store(struct wlp *wlp, const char *buf, + size_t size) +{ + ssize_t result; + unsigned sub; + u8 max_sub = ~0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_alloc_device_info(wlp); + if (result < 0) + goto out; + } + result = sscanf(buf, "%u", &sub); + if (sub <= max_sub) + wlp->dev_info->prim_dev_type.OUIsubdiv = sub; + else + result = -EINVAL; +out: + mutex_unlock(&wlp->mutex); + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_OUI_sub_store); + +ssize_t wlp_dev_prim_subcat_show(struct wlp *wlp, char *buf) +{ + ssize_t result = 0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_setup_device_info(wlp); + if (result < 0) + goto out; + } + result = scnprintf(buf, PAGE_SIZE, "%u\n", + wlp->dev_info->prim_dev_type.subID); +out: + mutex_unlock(&wlp->mutex); + return result; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_subcat_show); + +ssize_t wlp_dev_prim_subcat_store(struct wlp *wlp, const char *buf, + size_t size) +{ + ssize_t result; + unsigned sub; + __le16 max_sub = ~0; + mutex_lock(&wlp->mutex); + if (wlp->dev_info == NULL) { + result = __wlp_alloc_device_info(wlp); + if (result < 0) + goto out; + } + result = sscanf(buf, "%u", &sub); + if (sub <= max_sub) + wlp->dev_info->prim_dev_type.subID = sub; + else + result = -EINVAL; +out: + mutex_unlock(&wlp->mutex); + return result < 0 ? result : size; +} +EXPORT_SYMBOL_GPL(wlp_dev_prim_subcat_store); + +/** + * Subsystem implementation for interaction with individual WSS via sysfs + * + * Followed instructions for subsystem in Documentation/filesystems/sysfs.txt + */ + +#define kobj_to_wlp_wss(obj) container_of(obj, struct wlp_wss, kobj) +#define attr_to_wlp_wss_attr(_attr) \ + container_of(_attr, struct wlp_wss_attribute, attr) + +/** + * Sysfs subsystem: forward read calls + * + * Sysfs operation for forwarding read call to the show method of the + * attribute owner + */ +static +ssize_t wlp_wss_attr_show(struct kobject *kobj, struct attribute *attr, + char *buf) +{ + struct wlp_wss_attribute *wss_attr = attr_to_wlp_wss_attr(attr); + struct wlp_wss *wss = kobj_to_wlp_wss(kobj); + ssize_t ret = -EIO; + + if (wss_attr->show) + ret = wss_attr->show(wss, buf); + return ret; +} +/** + * Sysfs subsystem: forward write calls + * + * Sysfs operation for forwarding write call to the store method of the + * attribute owner + */ +static +ssize_t wlp_wss_attr_store(struct kobject *kobj, struct attribute *attr, + const char *buf, size_t count) +{ + struct wlp_wss_attribute *wss_attr = attr_to_wlp_wss_attr(attr); + struct wlp_wss *wss = kobj_to_wlp_wss(kobj); + ssize_t ret = -EIO; + + if (wss_attr->store) + ret = wss_attr->store(wss, buf, count); + return ret; +} + +static +struct sysfs_ops wss_sysfs_ops = { + .show = wlp_wss_attr_show, + .store = wlp_wss_attr_store, +}; + +struct kobj_type wss_ktype = { + .release = wlp_wss_release, + .sysfs_ops = &wss_sysfs_ops, +}; + + +/** + * Sysfs files for individual WSS + */ + +/** + * Print static properties of this WSS + * + * The name of a WSS may not be null teminated. It's max size is 64 bytes + * so we copy it to a larger array just to make sure we print sane data. + */ +static ssize_t wlp_wss_properties_show(struct wlp_wss *wss, char *buf) +{ + int result = 0; + + if (mutex_lock_interruptible(&wss->mutex)) + goto out; + result = __wlp_wss_properties_show(wss, buf, PAGE_SIZE); + mutex_unlock(&wss->mutex); +out: + return result; +} +WSS_ATTR(properties, S_IRUGO, wlp_wss_properties_show, NULL); + +/** + * Print all connected members of this WSS + * The EDA cache contains all members of WSS neighborhood. + */ +static ssize_t wlp_wss_members_show(struct wlp_wss *wss, char *buf) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + return wlp_eda_show(wlp, buf); +} +WSS_ATTR(members, S_IRUGO, wlp_wss_members_show, NULL); + +static +const char *__wlp_strstate[] = { + "none", + "partially enrolled", + "enrolled", + "active", + "connected", +}; + +static const char *wlp_wss_strstate(unsigned state) +{ + if (state >= ARRAY_SIZE(__wlp_strstate)) + return "unknown state"; + return __wlp_strstate[state]; +} + +/* + * Print current state of this WSS + */ +static ssize_t wlp_wss_state_show(struct wlp_wss *wss, char *buf) +{ + int result = 0; + + if (mutex_lock_interruptible(&wss->mutex)) + goto out; + result = scnprintf(buf, PAGE_SIZE, "%s\n", + wlp_wss_strstate(wss->state)); + mutex_unlock(&wss->mutex); +out: + return result; +} +WSS_ATTR(state, S_IRUGO, wlp_wss_state_show, NULL); + + +static +struct attribute *wss_attrs[] = { + &wss_attr_properties.attr, + &wss_attr_members.attr, + &wss_attr_state.attr, + NULL, +}; + +struct attribute_group wss_attr_group = { + .name = NULL, /* we want them in the same directory */ + .attrs = wss_attrs, +}; diff --git a/drivers/uwb/wlp/txrx.c b/drivers/uwb/wlp/txrx.c new file mode 100644 index 000000000000..c701bd1a2887 --- /dev/null +++ b/drivers/uwb/wlp/txrx.c @@ -0,0 +1,374 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * Message exchange infrastructure + * + * Copyright (C) 2007 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: Docs + * + */ + +#include <linux/etherdevice.h> +#include <linux/wlp.h> +#define D_LOCAL 5 +#include <linux/uwb/debug.h> +#include "wlp-internal.h" + + +/** + * Direct incoming association msg to correct parsing routine + * + * We only expect D1, E1, C1, C3 messages as new. All other incoming + * association messages should form part of an established session that is + * handled elsewhere. + * The handling of these messages often require calling sleeping functions + * - this cannot be done in interrupt context. We use the kernel's + * workqueue to handle these messages. + */ +static +void wlp_direct_assoc_frame(struct wlp *wlp, struct sk_buff *skb, + struct uwb_dev_addr *src) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_frame_assoc *assoc = (void *) skb->data; + struct wlp_assoc_frame_ctx *frame_ctx; + d_fnstart(5, dev, "wlp %p, skb %p\n", wlp, skb); + frame_ctx = kmalloc(sizeof(*frame_ctx), GFP_ATOMIC); + if (frame_ctx == NULL) { + dev_err(dev, "WLP: Unable to allocate memory for association " + "frame handling.\n"); + kfree_skb(skb); + goto out; + } + frame_ctx->wlp = wlp; + frame_ctx->skb = skb; + frame_ctx->src = *src; + switch (assoc->type) { + case WLP_ASSOC_D1: + d_printf(5, dev, "Received a D1 frame.\n"); + INIT_WORK(&frame_ctx->ws, wlp_handle_d1_frame); + schedule_work(&frame_ctx->ws); + break; + case WLP_ASSOC_E1: + d_printf(5, dev, "Received a E1 frame. FIXME?\n"); + kfree_skb(skb); /* Temporary until we handle it */ + kfree(frame_ctx); /* Temporary until we handle it */ + break; + case WLP_ASSOC_C1: + d_printf(5, dev, "Received a C1 frame.\n"); + INIT_WORK(&frame_ctx->ws, wlp_handle_c1_frame); + schedule_work(&frame_ctx->ws); + break; + case WLP_ASSOC_C3: + d_printf(5, dev, "Received a C3 frame.\n"); + INIT_WORK(&frame_ctx->ws, wlp_handle_c3_frame); + schedule_work(&frame_ctx->ws); + break; + default: + dev_err(dev, "Received unexpected association frame. " + "Type = %d \n", assoc->type); + kfree_skb(skb); + kfree(frame_ctx); + break; + } +out: + d_fnend(5, dev, "wlp %p\n", wlp); +} + +/** + * Process incoming association frame + * + * Although it could be possible to deal with some incoming association + * messages without creating a new session we are keeping things simple. We + * do not accept new association messages if there is a session in progress + * and the messages do not belong to that session. + * + * If an association message arrives that causes the creation of a session + * (WLP_ASSOC_E1) while we are in the process of creating a session then we + * rely on the neighbor mutex to protect the data. That is, the new session + * will not be started until the previous is completed. + */ +static +void wlp_receive_assoc_frame(struct wlp *wlp, struct sk_buff *skb, + struct uwb_dev_addr *src) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_frame_assoc *assoc = (void *) skb->data; + struct wlp_session *session = wlp->session; + u8 version; + d_fnstart(5, dev, "wlp %p, skb %p\n", wlp, skb); + + if (wlp_get_version(wlp, &assoc->version, &version, + sizeof(assoc->version)) < 0) + goto error; + if (version != WLP_VERSION) { + dev_err(dev, "Unsupported WLP version in association " + "message.\n"); + goto error; + } + if (session != NULL) { + /* Function that created this session is still holding the + * &wlp->mutex to protect this session. */ + if (assoc->type == session->exp_message || + assoc->type == WLP_ASSOC_F0) { + if (!memcmp(&session->neighbor_addr, src, + sizeof(*src))) { + session->data = skb; + (session->cb)(wlp); + } else { + dev_err(dev, "Received expected message from " + "unexpected source. Expected message " + "%d or F0 from %02x:%02x, but received " + "it from %02x:%02x. Dropping.\n", + session->exp_message, + session->neighbor_addr.data[1], + session->neighbor_addr.data[0], + src->data[1], src->data[0]); + goto error; + } + } else { + dev_err(dev, "Association already in progress. " + "Dropping.\n"); + goto error; + } + } else { + wlp_direct_assoc_frame(wlp, skb, src); + } + d_fnend(5, dev, "wlp %p\n", wlp); + return; +error: + kfree_skb(skb); + d_fnend(5, dev, "wlp %p\n", wlp); +} + +/** + * Verify incoming frame is from connected neighbor, prep to pass to WLP client + * + * Verification proceeds according to WLP 0.99 [7.3.1]. The source address + * is used to determine which neighbor is sending the frame and the WSS tag + * is used to know to which WSS the frame belongs (we only support one WSS + * so this test is straight forward). + * With the WSS found we need to ensure that we are connected before + * allowing the exchange of data frames. + */ +static +int wlp_verify_prep_rx_frame(struct wlp *wlp, struct sk_buff *skb, + struct uwb_dev_addr *src) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = -EINVAL; + struct wlp_eda_node eda_entry; + struct wlp_frame_std_abbrv_hdr *hdr = (void *) skb->data; + + d_fnstart(6, dev, "wlp %p, skb %p \n", wlp, skb); + /*verify*/ + result = wlp_copy_eda_node(&wlp->eda, src, &eda_entry); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Incoming frame is from unknown " + "neighbor %02x:%02x.\n", src->data[1], + src->data[0]); + goto out; + } + if (hdr->tag != eda_entry.tag) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Tag of incoming frame from " + "%02x:%02x does not match expected tag. " + "Received 0x%02x, expected 0x%02x. \n", + src->data[1], src->data[0], hdr->tag, + eda_entry.tag); + result = -EINVAL; + goto out; + } + if (eda_entry.state != WLP_WSS_CONNECTED) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Incoming frame from " + "%02x:%02x does is not from connected WSS.\n", + src->data[1], src->data[0]); + result = -EINVAL; + goto out; + } + /*prep*/ + skb_pull(skb, sizeof(*hdr)); +out: + d_fnend(6, dev, "wlp %p, skb %p, result = %d \n", wlp, skb, result); + return result; +} + +/** + * Receive a WLP frame from device + * + * @returns: 1 if calling function should free the skb + * 0 if it successfully handled skb and freed it + * 0 if error occured, will free skb in this case + */ +int wlp_receive_frame(struct device *dev, struct wlp *wlp, struct sk_buff *skb, + struct uwb_dev_addr *src) +{ + unsigned len = skb->len; + void *ptr = skb->data; + struct wlp_frame_hdr *hdr; + int result = 0; + + d_fnstart(6, dev, "skb (%p), len (%u)\n", skb, len); + if (len < sizeof(*hdr)) { + dev_err(dev, "Not enough data to parse WLP header.\n"); + result = -EINVAL; + goto out; + } + hdr = ptr; + d_dump(6, dev, hdr, sizeof(*hdr)); + if (le16_to_cpu(hdr->mux_hdr) != WLP_PROTOCOL_ID) { + dev_err(dev, "Not a WLP frame type.\n"); + result = -EINVAL; + goto out; + } + switch (hdr->type) { + case WLP_FRAME_STANDARD: + if (len < sizeof(struct wlp_frame_std_abbrv_hdr)) { + dev_err(dev, "Not enough data to parse Standard " + "WLP header.\n"); + goto out; + } + result = wlp_verify_prep_rx_frame(wlp, skb, src); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Verification of frame " + "from neighbor %02x:%02x failed.\n", + src->data[1], src->data[0]); + goto out; + } + result = 1; + break; + case WLP_FRAME_ABBREVIATED: + dev_err(dev, "Abbreviated frame received. FIXME?\n"); + kfree_skb(skb); + break; + case WLP_FRAME_CONTROL: + dev_err(dev, "Control frame received. FIXME?\n"); + kfree_skb(skb); + break; + case WLP_FRAME_ASSOCIATION: + if (len < sizeof(struct wlp_frame_assoc)) { + dev_err(dev, "Not enough data to parse Association " + "WLP header.\n"); + goto out; + } + d_printf(5, dev, "Association frame received.\n"); + wlp_receive_assoc_frame(wlp, skb, src); + break; + default: + dev_err(dev, "Invalid frame received.\n"); + result = -EINVAL; + break; + } +out: + if (result < 0) { + kfree_skb(skb); + result = 0; + } + d_fnend(6, dev, "skb (%p)\n", skb); + return result; +} +EXPORT_SYMBOL_GPL(wlp_receive_frame); + + +/** + * Verify frame from network stack, prepare for further transmission + * + * @skb: the socket buffer that needs to be prepared for transmission (it + * is in need of a WLP header). If this is a broadcast frame we take + * over the entire transmission. + * If it is a unicast the WSS connection should already be established + * and transmission will be done by the calling function. + * @dst: On return this will contain the device address to which the + * frame is destined. + * @returns: 0 on success no tx : WLP header sucessfully applied to skb buffer, + * calling function can proceed with tx + * 1 on success with tx : WLP will take over transmission of this + * frame + * <0 on error + * + * The network stack (WLP client) is attempting to transmit a frame. We can + * only transmit data if a local WSS is at least active (connection will be + * done here if this is a broadcast frame and neighbor also has the WSS + * active). + * + * The frame can be either broadcast or unicast. Broadcast in a WSS is + * supported via multicast, but we don't support multicast yet (until + * devices start to support MAB IEs). If a broadcast frame needs to be + * transmitted it is treated as a unicast frame to each neighbor. In this + * case the WLP takes over transmission of the skb and returns 1 + * to the caller to indicate so. Also, in this case, if a neighbor has the + * same WSS activated but is not connected then the WSS connection will be + * done at this time. The neighbor's virtual address will be learned at + * this time. + * + * The destination address in a unicast frame is the virtual address of the + * neighbor. This address only becomes known when a WSS connection is + * established. We thus rely on a broadcast frame to trigger the setup of + * WSS connections to all neighbors before we are able to send unicast + * frames to them. This seems reasonable as IP would usually use ARP first + * before any unicast frames are sent. + * + * If we are already connected to the neighbor (neighbor's virtual address + * is known) we just prepare the WLP header and the caller will continue to + * send the frame. + * + * A failure in this function usually indicates something that cannot be + * fixed automatically. So, if this function fails (@return < 0) the calling + * function should not retry to send the frame as it will very likely keep + * failing. + * + */ +int wlp_prepare_tx_frame(struct device *dev, struct wlp *wlp, + struct sk_buff *skb, struct uwb_dev_addr *dst) +{ + int result = -EINVAL; + struct ethhdr *eth_hdr = (void *) skb->data; + + d_fnstart(6, dev, "wlp (%p), skb (%p) \n", wlp, skb); + if (is_broadcast_ether_addr(eth_hdr->h_dest)) { + d_printf(6, dev, "WLP: handling broadcast frame. \n"); + result = wlp_eda_for_each(&wlp->eda, wlp_wss_send_copy, skb); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "Unable to handle broadcast " + "frame from WLP client.\n"); + goto out; + } + dev_kfree_skb_irq(skb); + result = 1; + /* Frame will be transmitted by WLP. */ + } else { + d_printf(6, dev, "WLP: handling unicast frame. \n"); + result = wlp_eda_for_virtual(&wlp->eda, eth_hdr->h_dest, dst, + wlp_wss_prep_hdr, skb); + if (unlikely(result < 0)) { + if (printk_ratelimit()) + dev_err(dev, "Unable to prepare " + "skb for transmission. \n"); + goto out; + } + } +out: + d_fnend(6, dev, "wlp (%p), skb (%p). result = %d \n", wlp, skb, result); + return result; +} +EXPORT_SYMBOL_GPL(wlp_prepare_tx_frame); diff --git a/drivers/uwb/wlp/wlp-internal.h b/drivers/uwb/wlp/wlp-internal.h new file mode 100644 index 000000000000..1c94fabfb1a7 --- /dev/null +++ b/drivers/uwb/wlp/wlp-internal.h @@ -0,0 +1,228 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * Internal API + * + * Copyright (C) 2007 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + */ + +#ifndef __WLP_INTERNAL_H__ +#define __WLP_INTERNAL_H__ + +/** + * State of WSS connection + * + * A device needs to connect to a neighbor in an activated WSS before data + * can be transmitted. The spec also distinguishes between a new connection + * attempt and a connection attempt after previous connection attempts. The + * state WLP_WSS_CONNECT_FAILED is used for this scenario. See WLP 0.99 + * [7.2.6] + */ +enum wlp_wss_connect { + WLP_WSS_UNCONNECTED = 0, + WLP_WSS_CONNECTED, + WLP_WSS_CONNECT_FAILED, +}; + +extern struct kobj_type wss_ktype; +extern struct attribute_group wss_attr_group; + +extern int uwb_rc_ie_add(struct uwb_rc *, const struct uwb_ie_hdr *, size_t); +extern int uwb_rc_ie_rm(struct uwb_rc *, enum uwb_ie); + + +/* This should be changed to a dynamic array where entries are sorted + * by eth_addr and search is done in a binary form + * + * Although thinking twice about it: this technologie's maximum reach + * is 10 meters...unless you want to pack too much stuff in around + * your radio controller/WLP device, the list will probably not be + * too big. + * + * In any case, there is probably some data structure in the kernel + * than we could reused for that already. + * + * The below structure is really just good while we support one WSS per + * host. + */ +struct wlp_eda_node { + struct list_head list_node; + unsigned char eth_addr[ETH_ALEN]; + struct uwb_dev_addr dev_addr; + struct wlp_wss *wss; + unsigned char virt_addr[ETH_ALEN]; + u8 tag; + enum wlp_wss_connect state; +}; + +typedef int (*wlp_eda_for_each_f)(struct wlp *, struct wlp_eda_node *, void *); + +extern void wlp_eda_init(struct wlp_eda *); +extern void wlp_eda_release(struct wlp_eda *); +extern int wlp_eda_create_node(struct wlp_eda *, + const unsigned char eth_addr[ETH_ALEN], + const struct uwb_dev_addr *); +extern void wlp_eda_rm_node(struct wlp_eda *, const struct uwb_dev_addr *); +extern int wlp_eda_update_node(struct wlp_eda *, + const struct uwb_dev_addr *, + struct wlp_wss *, + const unsigned char virt_addr[ETH_ALEN], + const u8, const enum wlp_wss_connect); +extern int wlp_eda_update_node_state(struct wlp_eda *, + const struct uwb_dev_addr *, + const enum wlp_wss_connect); + +extern int wlp_copy_eda_node(struct wlp_eda *, struct uwb_dev_addr *, + struct wlp_eda_node *); +extern int wlp_eda_for_each(struct wlp_eda *, wlp_eda_for_each_f , void *); +extern int wlp_eda_for_virtual(struct wlp_eda *, + const unsigned char eth_addr[ETH_ALEN], + struct uwb_dev_addr *, + wlp_eda_for_each_f , void *); + + +extern void wlp_remove_neighbor_tmp_info(struct wlp_neighbor_e *); + +extern size_t wlp_wss_key_print(char *, size_t, u8 *); + +/* Function called when no more references to WSS exists */ +extern void wlp_wss_release(struct kobject *); + +extern void wlp_wss_reset(struct wlp_wss *); +extern int wlp_wss_create_activate(struct wlp_wss *, struct wlp_uuid *, + char *, unsigned, unsigned); +extern int wlp_wss_enroll_activate(struct wlp_wss *, struct wlp_uuid *, + struct uwb_dev_addr *); +extern ssize_t wlp_discover(struct wlp *); + +extern int wlp_enroll_neighbor(struct wlp *, struct wlp_neighbor_e *, + struct wlp_wss *, struct wlp_uuid *); +extern int wlp_wss_is_active(struct wlp *, struct wlp_wss *, + struct uwb_dev_addr *); + +struct wlp_assoc_conn_ctx { + struct work_struct ws; + struct wlp *wlp; + struct sk_buff *skb; + struct wlp_eda_node eda_entry; +}; + + +extern int wlp_wss_connect_prep(struct wlp *, struct wlp_eda_node *, void *); +extern int wlp_wss_send_copy(struct wlp *, struct wlp_eda_node *, void *); + + +/* Message handling */ +struct wlp_assoc_frame_ctx { + struct work_struct ws; + struct wlp *wlp; + struct sk_buff *skb; + struct uwb_dev_addr src; +}; + +extern int wlp_wss_prep_hdr(struct wlp *, struct wlp_eda_node *, void *); +extern void wlp_handle_d1_frame(struct work_struct *); +extern int wlp_parse_d2_frame_to_cache(struct wlp *, struct sk_buff *, + struct wlp_neighbor_e *); +extern int wlp_parse_d2_frame_to_enroll(struct wlp_wss *, struct sk_buff *, + struct wlp_neighbor_e *, + struct wlp_uuid *); +extern void wlp_handle_c1_frame(struct work_struct *); +extern void wlp_handle_c3_frame(struct work_struct *); +extern int wlp_parse_c3c4_frame(struct wlp *, struct sk_buff *, + struct wlp_uuid *, u8 *, + struct uwb_mac_addr *); +extern int wlp_parse_f0(struct wlp *, struct sk_buff *); +extern int wlp_send_assoc_frame(struct wlp *, struct wlp_wss *, + struct uwb_dev_addr *, enum wlp_assoc_type); +extern ssize_t wlp_get_version(struct wlp *, struct wlp_attr_version *, + u8 *, ssize_t); +extern ssize_t wlp_get_wssid(struct wlp *, struct wlp_attr_wssid *, + struct wlp_uuid *, ssize_t); +extern int __wlp_alloc_device_info(struct wlp *); +extern int __wlp_setup_device_info(struct wlp *); + +extern struct wlp_wss_attribute wss_attribute_properties; +extern struct wlp_wss_attribute wss_attribute_members; +extern struct wlp_wss_attribute wss_attribute_state; + +static inline +size_t wlp_wss_uuid_print(char *buf, size_t bufsize, struct wlp_uuid *uuid) +{ + size_t result; + + result = scnprintf(buf, bufsize, + "%02x:%02x:%02x:%02x:%02x:%02x:" + "%02x:%02x:%02x:%02x:%02x:%02x:" + "%02x:%02x:%02x:%02x", + uuid->data[0], uuid->data[1], + uuid->data[2], uuid->data[3], + uuid->data[4], uuid->data[5], + uuid->data[6], uuid->data[7], + uuid->data[8], uuid->data[9], + uuid->data[10], uuid->data[11], + uuid->data[12], uuid->data[13], + uuid->data[14], uuid->data[15]); + return result; +} + +/** + * FIXME: How should a nonce be displayed? + */ +static inline +size_t wlp_wss_nonce_print(char *buf, size_t bufsize, struct wlp_nonce *nonce) +{ + size_t result; + + result = scnprintf(buf, bufsize, + "%02x %02x %02x %02x %02x %02x " + "%02x %02x %02x %02x %02x %02x " + "%02x %02x %02x %02x", + nonce->data[0], nonce->data[1], + nonce->data[2], nonce->data[3], + nonce->data[4], nonce->data[5], + nonce->data[6], nonce->data[7], + nonce->data[8], nonce->data[9], + nonce->data[10], nonce->data[11], + nonce->data[12], nonce->data[13], + nonce->data[14], nonce->data[15]); + return result; +} + + +static inline +void wlp_session_cb(struct wlp *wlp) +{ + struct completion *completion = wlp->session->cb_priv; + complete(completion); +} + +static inline +int wlp_uuid_is_set(struct wlp_uuid *uuid) +{ + struct wlp_uuid zero_uuid = { .data = { 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00} }; + + if (!memcmp(uuid, &zero_uuid, sizeof(*uuid))) + return 0; + return 1; +} + +#endif /* __WLP_INTERNAL_H__ */ diff --git a/drivers/uwb/wlp/wlp-lc.c b/drivers/uwb/wlp/wlp-lc.c new file mode 100644 index 000000000000..0799402e73fb --- /dev/null +++ b/drivers/uwb/wlp/wlp-lc.c @@ -0,0 +1,585 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * + * Copyright (C) 2005-2006 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + */ + +#include <linux/wlp.h> +#define D_LOCAL 6 +#include <linux/uwb/debug.h> +#include "wlp-internal.h" + + +static +void wlp_neighbor_init(struct wlp_neighbor_e *neighbor) +{ + INIT_LIST_HEAD(&neighbor->wssid); +} + +/** + * Create area for device information storage + * + * wlp->mutex must be held + */ +int __wlp_alloc_device_info(struct wlp *wlp) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + BUG_ON(wlp->dev_info != NULL); + wlp->dev_info = kzalloc(sizeof(struct wlp_device_info), GFP_KERNEL); + if (wlp->dev_info == NULL) { + dev_err(dev, "WLP: Unable to allocate memory for " + "device information.\n"); + return -ENOMEM; + } + return 0; +} + + +/** + * Fill in device information using function provided by driver + * + * wlp->mutex must be held + */ +static +void __wlp_fill_device_info(struct wlp *wlp) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + + BUG_ON(wlp->fill_device_info == NULL); + d_printf(6, dev, "Retrieving device information " + "from device driver.\n"); + wlp->fill_device_info(wlp, wlp->dev_info); +} + +/** + * Setup device information + * + * Allocate area for device information and populate it. + * + * wlp->mutex must be held + */ +int __wlp_setup_device_info(struct wlp *wlp) +{ + int result; + struct device *dev = &wlp->rc->uwb_dev.dev; + + result = __wlp_alloc_device_info(wlp); + if (result < 0) { + dev_err(dev, "WLP: Unable to allocate area for " + "device information.\n"); + return result; + } + __wlp_fill_device_info(wlp); + return 0; +} + +/** + * Remove information about neighbor stored temporarily + * + * Information learned during discovey should only be stored when the + * device enrolls in the neighbor's WSS. We do need to store this + * information temporarily in order to present it to the user. + * + * We are only interested in keeping neighbor WSS information if that + * neighbor is accepting enrollment. + * + * should be called with wlp->nbmutex held + */ +void wlp_remove_neighbor_tmp_info(struct wlp_neighbor_e *neighbor) +{ + struct wlp_wssid_e *wssid_e, *next; + u8 keep; + if (!list_empty(&neighbor->wssid)) { + list_for_each_entry_safe(wssid_e, next, &neighbor->wssid, + node) { + if (wssid_e->info != NULL) { + keep = wssid_e->info->accept_enroll; + kfree(wssid_e->info); + wssid_e->info = NULL; + if (!keep) { + list_del(&wssid_e->node); + kfree(wssid_e); + } + } + } + } + if (neighbor->info != NULL) { + kfree(neighbor->info); + neighbor->info = NULL; + } +} + +/** + * Populate WLP neighborhood cache with neighbor information + * + * A new neighbor is found. If it is discoverable then we add it to the + * neighborhood cache. + * + */ +static +int wlp_add_neighbor(struct wlp *wlp, struct uwb_dev *dev) +{ + int result = 0; + int discoverable; + struct wlp_neighbor_e *neighbor; + + d_fnstart(6, &dev->dev, "uwb %p \n", dev); + d_printf(6, &dev->dev, "Found neighbor device %02x:%02x \n", + dev->dev_addr.data[1], dev->dev_addr.data[0]); + /** + * FIXME: + * Use contents of WLP IE found in beacon cache to determine if + * neighbor is discoverable. + * The device does not support WLP IE yet so this still needs to be + * done. Until then we assume all devices are discoverable. + */ + discoverable = 1; /* will be changed when FIXME disappears */ + if (discoverable) { + /* Add neighbor to cache for discovery */ + neighbor = kzalloc(sizeof(*neighbor), GFP_KERNEL); + if (neighbor == NULL) { + dev_err(&dev->dev, "Unable to create memory for " + "new neighbor. \n"); + result = -ENOMEM; + goto error_no_mem; + } + wlp_neighbor_init(neighbor); + uwb_dev_get(dev); + neighbor->uwb_dev = dev; + list_add(&neighbor->node, &wlp->neighbors); + } +error_no_mem: + d_fnend(6, &dev->dev, "uwb %p, result = %d \n", dev, result); + return result; +} + +/** + * Remove one neighbor from cache + */ +static +void __wlp_neighbor_release(struct wlp_neighbor_e *neighbor) +{ + struct wlp_wssid_e *wssid_e, *next_wssid_e; + + list_for_each_entry_safe(wssid_e, next_wssid_e, + &neighbor->wssid, node) { + list_del(&wssid_e->node); + kfree(wssid_e); + } + uwb_dev_put(neighbor->uwb_dev); + list_del(&neighbor->node); + kfree(neighbor); +} + +/** + * Clear entire neighborhood cache. + */ +static +void __wlp_neighbors_release(struct wlp *wlp) +{ + struct wlp_neighbor_e *neighbor, *next; + if (list_empty(&wlp->neighbors)) + return; + list_for_each_entry_safe(neighbor, next, &wlp->neighbors, node) { + __wlp_neighbor_release(neighbor); + } +} + +static +void wlp_neighbors_release(struct wlp *wlp) +{ + mutex_lock(&wlp->nbmutex); + __wlp_neighbors_release(wlp); + mutex_unlock(&wlp->nbmutex); +} + + + +/** + * Send D1 message to neighbor, receive D2 message + * + * @neighbor: neighbor to which D1 message will be sent + * @wss: if not NULL, it is an enrollment request for this WSS + * @wssid: if wss not NULL, this is the wssid of the WSS in which we + * want to enroll + * + * A D1/D2 exchange is done for one of two reasons: discovery or + * enrollment. If done for discovery the D1 message is sent to the neighbor + * and the contents of the D2 response is stored in a temporary cache. + * If done for enrollment the @wss and @wssid are provided also. In this + * case the D1 message is sent to the neighbor, the D2 response is parsed + * for enrollment of the WSS with wssid. + * + * &wss->mutex is held + */ +static +int wlp_d1d2_exchange(struct wlp *wlp, struct wlp_neighbor_e *neighbor, + struct wlp_wss *wss, struct wlp_uuid *wssid) +{ + int result; + struct device *dev = &wlp->rc->uwb_dev.dev; + DECLARE_COMPLETION_ONSTACK(completion); + struct wlp_session session; + struct sk_buff *skb; + struct wlp_frame_assoc *resp; + struct uwb_dev_addr *dev_addr = &neighbor->uwb_dev->dev_addr; + + mutex_lock(&wlp->mutex); + if (!wlp_uuid_is_set(&wlp->uuid)) { + dev_err(dev, "WLP: UUID is not set. Set via sysfs to " + "proceed.\n"); + result = -ENXIO; + goto out; + } + /* Send D1 association frame */ + result = wlp_send_assoc_frame(wlp, wss, dev_addr, WLP_ASSOC_D1); + if (result < 0) { + dev_err(dev, "Unable to send D1 frame to neighbor " + "%02x:%02x (%d)\n", dev_addr->data[1], + dev_addr->data[0], result); + d_printf(6, dev, "Add placeholders into buffer next to " + "neighbor information we have (dev address).\n"); + goto out; + } + /* Create session, wait for response */ + session.exp_message = WLP_ASSOC_D2; + session.cb = wlp_session_cb; + session.cb_priv = &completion; + session.neighbor_addr = *dev_addr; + BUG_ON(wlp->session != NULL); + wlp->session = &session; + /* Wait for D2/F0 frame */ + result = wait_for_completion_interruptible_timeout(&completion, + WLP_PER_MSG_TIMEOUT * HZ); + if (result == 0) { + result = -ETIMEDOUT; + dev_err(dev, "Timeout while sending D1 to neighbor " + "%02x:%02x.\n", dev_addr->data[1], + dev_addr->data[0]); + goto error_session; + } + if (result < 0) { + dev_err(dev, "Unable to discover/enroll neighbor %02x:%02x.\n", + dev_addr->data[1], dev_addr->data[0]); + goto error_session; + } + /* Parse message in session->data: it will be either D2 or F0 */ + skb = session.data; + resp = (void *) skb->data; + d_printf(6, dev, "Received response to D1 frame. \n"); + d_dump(6, dev, skb->data, skb->len > 72 ? 72 : skb->len); + + if (resp->type == WLP_ASSOC_F0) { + result = wlp_parse_f0(wlp, skb); + if (result < 0) + dev_err(dev, "WLP: Unable to parse F0 from neighbor " + "%02x:%02x.\n", dev_addr->data[1], + dev_addr->data[0]); + result = -EINVAL; + goto error_resp_parse; + } + if (wss == NULL) { + /* Discovery */ + result = wlp_parse_d2_frame_to_cache(wlp, skb, neighbor); + if (result < 0) { + dev_err(dev, "WLP: Unable to parse D2 message from " + "neighbor %02x:%02x for discovery.\n", + dev_addr->data[1], dev_addr->data[0]); + goto error_resp_parse; + } + } else { + /* Enrollment */ + result = wlp_parse_d2_frame_to_enroll(wss, skb, neighbor, + wssid); + if (result < 0) { + dev_err(dev, "WLP: Unable to parse D2 message from " + "neighbor %02x:%02x for enrollment.\n", + dev_addr->data[1], dev_addr->data[0]); + goto error_resp_parse; + } + } +error_resp_parse: + kfree_skb(skb); +error_session: + wlp->session = NULL; +out: + mutex_unlock(&wlp->mutex); + return result; +} + +/** + * Enroll into WSS of provided WSSID by using neighbor as registrar + * + * &wss->mutex is held + */ +int wlp_enroll_neighbor(struct wlp *wlp, struct wlp_neighbor_e *neighbor, + struct wlp_wss *wss, struct wlp_uuid *wssid) +{ + int result = 0; + struct device *dev = &wlp->rc->uwb_dev.dev; + char buf[WLP_WSS_UUID_STRSIZE]; + struct uwb_dev_addr *dev_addr = &neighbor->uwb_dev->dev_addr; + wlp_wss_uuid_print(buf, sizeof(buf), wssid); + d_fnstart(6, dev, "wlp %p, neighbor %p, wss %p, wssid %p (%s)\n", + wlp, neighbor, wss, wssid, buf); + d_printf(6, dev, "Complete me.\n"); + result = wlp_d1d2_exchange(wlp, neighbor, wss, wssid); + if (result < 0) { + dev_err(dev, "WLP: D1/D2 message exchange for enrollment " + "failed. result = %d \n", result); + goto out; + } + if (wss->state != WLP_WSS_STATE_PART_ENROLLED) { + dev_err(dev, "WLP: Unable to enroll into WSS %s using " + "neighbor %02x:%02x. \n", buf, + dev_addr->data[1], dev_addr->data[0]); + result = -EINVAL; + goto out; + } + if (wss->secure_status == WLP_WSS_SECURE) { + dev_err(dev, "FIXME: need to complete secure enrollment.\n"); + result = -EINVAL; + goto error; + } else { + wss->state = WLP_WSS_STATE_ENROLLED; + d_printf(2, dev, "WLP: Success Enrollment into unsecure WSS " + "%s using neighbor %02x:%02x. \n", buf, + dev_addr->data[1], dev_addr->data[0]); + } + + d_fnend(6, dev, "wlp %p, neighbor %p, wss %p, wssid %p (%s)\n", + wlp, neighbor, wss, wssid, buf); +out: + return result; +error: + wlp_wss_reset(wss); + return result; +} + +/** + * Discover WSS information of neighbor's active WSS + */ +static +int wlp_discover_neighbor(struct wlp *wlp, + struct wlp_neighbor_e *neighbor) +{ + return wlp_d1d2_exchange(wlp, neighbor, NULL, NULL); +} + + +/** + * Each neighbor in the neighborhood cache is discoverable. Discover it. + * + * Discovery is done through sending of D1 association frame and parsing + * the D2 association frame response. Only wssid from D2 will be included + * in neighbor cache, rest is just displayed to user and forgotten. + * + * The discovery is not done in parallel. This is simple and enables us to + * maintain only one association context. + * + * The discovery of one neighbor does not affect the other, but if the + * discovery of a neighbor fails it is removed from the neighborhood cache. + */ +static +int wlp_discover_all_neighbors(struct wlp *wlp) +{ + int result = 0; + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_neighbor_e *neighbor, *next; + + list_for_each_entry_safe(neighbor, next, &wlp->neighbors, node) { + result = wlp_discover_neighbor(wlp, neighbor); + if (result < 0) { + dev_err(dev, "WLP: Unable to discover neighbor " + "%02x:%02x, removing from neighborhood. \n", + neighbor->uwb_dev->dev_addr.data[1], + neighbor->uwb_dev->dev_addr.data[0]); + __wlp_neighbor_release(neighbor); + } + } + return result; +} + +static int wlp_add_neighbor_helper(struct device *dev, void *priv) +{ + struct wlp *wlp = priv; + struct uwb_dev *uwb_dev = to_uwb_dev(dev); + + return wlp_add_neighbor(wlp, uwb_dev); +} + +/** + * Discover WLP neighborhood + * + * Will send D1 association frame to all devices in beacon group that have + * discoverable bit set in WLP IE. D2 frames will be received, information + * displayed to user in @buf. Partial information (from D2 association + * frame) will be cached to assist with future association + * requests. + * + * The discovery of the WLP neighborhood is triggered by the user. This + * should occur infrequently and we thus free current cache and re-allocate + * memory if needed. + * + * If one neighbor fails during initial discovery (determining if it is a + * neighbor or not), we fail all - note that interaction with neighbor has + * not occured at this point so if a failure occurs we know something went wrong + * locally. We thus undo everything. + */ +ssize_t wlp_discover(struct wlp *wlp) +{ + int result = 0; + struct device *dev = &wlp->rc->uwb_dev.dev; + + d_fnstart(6, dev, "wlp %p \n", wlp); + mutex_lock(&wlp->nbmutex); + /* Clear current neighborhood cache. */ + __wlp_neighbors_release(wlp); + /* Determine which devices in neighborhood. Repopulate cache. */ + result = uwb_dev_for_each(wlp->rc, wlp_add_neighbor_helper, wlp); + if (result < 0) { + /* May have partial neighbor information, release all. */ + __wlp_neighbors_release(wlp); + goto error_dev_for_each; + } + /* Discover the properties of devices in neighborhood. */ + result = wlp_discover_all_neighbors(wlp); + /* In case of failure we still print our partial results. */ + if (result < 0) { + dev_err(dev, "Unable to fully discover neighborhood. \n"); + result = 0; + } +error_dev_for_each: + mutex_unlock(&wlp->nbmutex); + d_fnend(6, dev, "wlp %p \n", wlp); + return result; +} + +/** + * Handle events from UWB stack + * + * We handle events conservatively. If a neighbor goes off the air we + * remove it from the neighborhood. If an association process is in + * progress this function will block waiting for the nbmutex to become + * free. The association process will thus be allowed to complete before it + * is removed. + */ +static +void wlp_uwb_notifs_cb(void *_wlp, struct uwb_dev *uwb_dev, + enum uwb_notifs event) +{ + struct wlp *wlp = _wlp; + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_neighbor_e *neighbor, *next; + int result; + switch (event) { + case UWB_NOTIF_ONAIR: + d_printf(6, dev, "UWB device %02x:%02x is onair\n", + uwb_dev->dev_addr.data[1], + uwb_dev->dev_addr.data[0]); + result = wlp_eda_create_node(&wlp->eda, + uwb_dev->mac_addr.data, + &uwb_dev->dev_addr); + if (result < 0) + dev_err(dev, "WLP: Unable to add new neighbor " + "%02x:%02x to EDA cache.\n", + uwb_dev->dev_addr.data[1], + uwb_dev->dev_addr.data[0]); + break; + case UWB_NOTIF_OFFAIR: + d_printf(6, dev, "UWB device %02x:%02x is offair\n", + uwb_dev->dev_addr.data[1], + uwb_dev->dev_addr.data[0]); + wlp_eda_rm_node(&wlp->eda, &uwb_dev->dev_addr); + mutex_lock(&wlp->nbmutex); + list_for_each_entry_safe(neighbor, next, &wlp->neighbors, + node) { + if (neighbor->uwb_dev == uwb_dev) { + d_printf(6, dev, "Removing device from " + "neighborhood.\n"); + __wlp_neighbor_release(neighbor); + } + } + mutex_unlock(&wlp->nbmutex); + break; + default: + dev_err(dev, "don't know how to handle event %d from uwb\n", + event); + } +} + +int wlp_setup(struct wlp *wlp, struct uwb_rc *rc) +{ + struct device *dev = &rc->uwb_dev.dev; + int result; + + d_fnstart(6, dev, "wlp %p\n", wlp); + BUG_ON(wlp->fill_device_info == NULL); + BUG_ON(wlp->xmit_frame == NULL); + BUG_ON(wlp->stop_queue == NULL); + BUG_ON(wlp->start_queue == NULL); + wlp->rc = rc; + wlp_eda_init(&wlp->eda);/* Set up address cache */ + wlp->uwb_notifs_handler.cb = wlp_uwb_notifs_cb; + wlp->uwb_notifs_handler.data = wlp; + uwb_notifs_register(rc, &wlp->uwb_notifs_handler); + + uwb_pal_init(&wlp->pal); + result = uwb_pal_register(rc, &wlp->pal); + if (result < 0) + uwb_notifs_deregister(wlp->rc, &wlp->uwb_notifs_handler); + + d_fnend(6, dev, "wlp %p, result = %d\n", wlp, result); + return result; +} +EXPORT_SYMBOL_GPL(wlp_setup); + +void wlp_remove(struct wlp *wlp) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + d_fnstart(6, dev, "wlp %p\n", wlp); + wlp_neighbors_release(wlp); + uwb_pal_unregister(wlp->rc, &wlp->pal); + uwb_notifs_deregister(wlp->rc, &wlp->uwb_notifs_handler); + wlp_eda_release(&wlp->eda); + mutex_lock(&wlp->mutex); + if (wlp->dev_info != NULL) + kfree(wlp->dev_info); + mutex_unlock(&wlp->mutex); + wlp->rc = NULL; + /* We have to use NULL here because this function can be called + * when the device disappeared. */ + d_fnend(6, NULL, "wlp %p\n", wlp); +} +EXPORT_SYMBOL_GPL(wlp_remove); + +/** + * wlp_reset_all - reset the WLP hardware + * @wlp: the WLP device to reset. + * + * This schedules a full hardware reset of the WLP device. The radio + * controller and any other PALs will also be reset. + */ +void wlp_reset_all(struct wlp *wlp) +{ + uwb_rc_reset_all(wlp->rc); +} +EXPORT_SYMBOL_GPL(wlp_reset_all); diff --git a/drivers/uwb/wlp/wss-lc.c b/drivers/uwb/wlp/wss-lc.c new file mode 100644 index 000000000000..96b18c9bd6e9 --- /dev/null +++ b/drivers/uwb/wlp/wss-lc.c @@ -0,0 +1,1055 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * + * Copyright (C) 2007 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * Implementation of the WLP association protocol. + * + * FIXME: Docs + * + * A UWB network interface will configure a WSS through wlp_wss_setup() after + * the interface has been assigned a MAC address, typically after + * "ifconfig" has been called. When the interface goes down it should call + * wlp_wss_remove(). + * + * When the WSS is ready for use the user interacts via sysfs to create, + * discover, and activate WSS. + * + * wlp_wss_enroll_activate() + * + * wlp_wss_create_activate() + * wlp_wss_set_wssid_hash() + * wlp_wss_comp_wssid_hash() + * wlp_wss_sel_bcast_addr() + * wlp_wss_sysfs_add() + * + * Called when no more references to WSS exist: + * wlp_wss_release() + * wlp_wss_reset() + */ + +#include <linux/etherdevice.h> /* for is_valid_ether_addr */ +#include <linux/skbuff.h> +#include <linux/wlp.h> +#define D_LOCAL 5 +#include <linux/uwb/debug.h> +#include "wlp-internal.h" + + +size_t wlp_wss_key_print(char *buf, size_t bufsize, u8 *key) +{ + size_t result; + + result = scnprintf(buf, bufsize, + "%02x %02x %02x %02x %02x %02x " + "%02x %02x %02x %02x %02x %02x " + "%02x %02x %02x %02x", + key[0], key[1], key[2], key[3], + key[4], key[5], key[6], key[7], + key[8], key[9], key[10], key[11], + key[12], key[13], key[14], key[15]); + return result; +} + +/** + * Compute WSSID hash + * WLP Draft 0.99 [7.2.1] + * + * The WSSID hash for a WSSID is the result of an octet-wise exclusive-OR + * of all octets in the WSSID. + */ +static +u8 wlp_wss_comp_wssid_hash(struct wlp_uuid *wssid) +{ + return wssid->data[0] ^ wssid->data[1] ^ wssid->data[2] + ^ wssid->data[3] ^ wssid->data[4] ^ wssid->data[5] + ^ wssid->data[6] ^ wssid->data[7] ^ wssid->data[8] + ^ wssid->data[9] ^ wssid->data[10] ^ wssid->data[11] + ^ wssid->data[12] ^ wssid->data[13] ^ wssid->data[14] + ^ wssid->data[15]; +} + +/** + * Select a multicast EUI-48 for the WSS broadcast address. + * WLP Draft 0.99 [7.2.1] + * + * Selected based on the WiMedia Alliance OUI, 00-13-88, within the WLP + * range, [01-13-88-00-01-00, 01-13-88-00-01-FF] inclusive. + * + * This address is currently hardcoded. + * FIXME? + */ +static +struct uwb_mac_addr wlp_wss_sel_bcast_addr(struct wlp_wss *wss) +{ + struct uwb_mac_addr bcast = { + .data = { 0x01, 0x13, 0x88, 0x00, 0x01, 0x00 } + }; + return bcast; +} + +/** + * Clear the contents of the WSS structure - all except kobj, mutex, virtual + * + * We do not want to reinitialize - the internal kobj should not change as + * it still points to the parent received during setup. The mutex should + * remain also. We thus just reset values individually. + * The virutal address assigned to WSS will remain the same for the + * lifetime of the WSS. We only reset the fields that can change during its + * lifetime. + */ +void wlp_wss_reset(struct wlp_wss *wss) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + d_fnstart(5, dev, "wss (%p) \n", wss); + memset(&wss->wssid, 0, sizeof(wss->wssid)); + wss->hash = 0; + memset(&wss->name[0], 0, sizeof(wss->name)); + memset(&wss->bcast, 0, sizeof(wss->bcast)); + wss->secure_status = WLP_WSS_UNSECURE; + memset(&wss->master_key[0], 0, sizeof(wss->master_key)); + wss->tag = 0; + wss->state = WLP_WSS_STATE_NONE; + d_fnend(5, dev, "wss (%p) \n", wss); +} + +/** + * Create sysfs infrastructure for WSS + * + * The WSS is configured to have the interface as parent (see wlp_wss_setup()) + * a new sysfs directory that includes wssid as its name is created in the + * interface's sysfs directory. The group of files interacting with WSS are + * created also. + */ +static +int wlp_wss_sysfs_add(struct wlp_wss *wss, char *wssid_str) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + int result; + + d_fnstart(5, dev, "wss (%p), wssid: %s\n", wss, wssid_str); + result = kobject_set_name(&wss->kobj, "wss-%s", wssid_str); + if (result < 0) + return result; + wss->kobj.ktype = &wss_ktype; + result = kobject_init_and_add(&wss->kobj, + &wss_ktype, wss->kobj.parent, "wlp"); + if (result < 0) { + dev_err(dev, "WLP: Cannot register WSS kobject.\n"); + goto error_kobject_register; + } + result = sysfs_create_group(&wss->kobj, &wss_attr_group); + if (result < 0) { + dev_err(dev, "WLP: Cannot register WSS attributes: %d\n", + result); + goto error_sysfs_create_group; + } + d_fnend(5, dev, "Completed. result = %d \n", result); + return 0; +error_sysfs_create_group: + + kobject_put(&wss->kobj); /* will free name if needed */ + return result; +error_kobject_register: + kfree(wss->kobj.name); + wss->kobj.name = NULL; + wss->kobj.ktype = NULL; + return result; +} + + +/** + * Release WSS + * + * No more references exist to this WSS. We should undo everything that was + * done in wlp_wss_create_activate() except removing the group. The group + * is not removed because an object can be unregistered before the group is + * created. We also undo any additional operations on the WSS after this + * (addition of members). + * + * If memory was allocated for the kobject's name then it will + * be freed by the kobject system during this time. + * + * The EDA cache is removed and reinitilized when the WSS is removed. We + * thus loose knowledge of members of this WSS at that time and need not do + * it here. + */ +void wlp_wss_release(struct kobject *kobj) +{ + struct wlp_wss *wss = container_of(kobj, struct wlp_wss, kobj); + + wlp_wss_reset(wss); +} + +/** + * Enroll into a WSS using provided neighbor as registrar + * + * First search the neighborhood information to learn which neighbor is + * referred to, next proceed with enrollment. + * + * &wss->mutex is held + */ +static +int wlp_wss_enroll_target(struct wlp_wss *wss, struct wlp_uuid *wssid, + struct uwb_dev_addr *dest) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_neighbor_e *neighbor; + char buf[WLP_WSS_UUID_STRSIZE]; + int result = -ENXIO; + struct uwb_dev_addr *dev_addr; + + wlp_wss_uuid_print(buf, sizeof(buf), wssid); + d_fnstart(5, dev, "wss %p, wssid %s, registrar %02x:%02x \n", + wss, buf, dest->data[1], dest->data[0]); + mutex_lock(&wlp->nbmutex); + list_for_each_entry(neighbor, &wlp->neighbors, node) { + dev_addr = &neighbor->uwb_dev->dev_addr; + if (!memcmp(dest, dev_addr, sizeof(*dest))) { + d_printf(5, dev, "Neighbor %02x:%02x is valid, " + "enrolling. \n", + dev_addr->data[1], dev_addr->data[0]); + result = wlp_enroll_neighbor(wlp, neighbor, wss, + wssid); + break; + } + } + if (result == -ENXIO) + dev_err(dev, "WLP: Cannot find neighbor %02x:%02x. \n", + dest->data[1], dest->data[0]); + mutex_unlock(&wlp->nbmutex); + d_fnend(5, dev, "wss %p, wssid %s, registrar %02x:%02x, result %d \n", + wss, buf, dest->data[1], dest->data[0], result); + return result; +} + +/** + * Enroll into a WSS previously discovered + * + * User provides WSSID of WSS, search for neighbor that has this WSS + * activated and attempt to enroll. + * + * &wss->mutex is held + */ +static +int wlp_wss_enroll_discovered(struct wlp_wss *wss, struct wlp_uuid *wssid) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + struct wlp_neighbor_e *neighbor; + struct wlp_wssid_e *wssid_e; + char buf[WLP_WSS_UUID_STRSIZE]; + int result = -ENXIO; + + wlp_wss_uuid_print(buf, sizeof(buf), wssid); + d_fnstart(5, dev, "wss %p, wssid %s \n", wss, buf); + mutex_lock(&wlp->nbmutex); + list_for_each_entry(neighbor, &wlp->neighbors, node) { + list_for_each_entry(wssid_e, &neighbor->wssid, node) { + if (!memcmp(wssid, &wssid_e->wssid, sizeof(*wssid))) { + d_printf(5, dev, "Found WSSID %s in neighbor " + "%02x:%02x cache. \n", buf, + neighbor->uwb_dev->dev_addr.data[1], + neighbor->uwb_dev->dev_addr.data[0]); + result = wlp_enroll_neighbor(wlp, neighbor, + wss, wssid); + if (result == 0) /* enrollment success */ + goto out; + break; + } + } + } +out: + if (result == -ENXIO) + dev_err(dev, "WLP: Cannot find WSSID %s in cache. \n", buf); + mutex_unlock(&wlp->nbmutex); + d_fnend(5, dev, "wss %p, wssid %s, result %d \n", wss, buf, result); + return result; +} + +/** + * Enroll into WSS with provided WSSID, registrar may be provided + * + * @wss: out WSS that will be enrolled + * @wssid: wssid of neighboring WSS that we want to enroll in + * @devaddr: registrar can be specified, will be broadcast (ff:ff) if any + * neighbor can be used as registrar. + * + * &wss->mutex is held + */ +static +int wlp_wss_enroll(struct wlp_wss *wss, struct wlp_uuid *wssid, + struct uwb_dev_addr *devaddr) +{ + int result; + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + char buf[WLP_WSS_UUID_STRSIZE]; + struct uwb_dev_addr bcast = {.data = {0xff, 0xff} }; + + wlp_wss_uuid_print(buf, sizeof(buf), wssid); + if (wss->state != WLP_WSS_STATE_NONE) { + dev_err(dev, "WLP: Already enrolled in WSS %s.\n", buf); + result = -EEXIST; + goto error; + } + if (!memcmp(&bcast, devaddr, sizeof(bcast))) { + d_printf(5, dev, "Request to enroll in discovered WSS " + "with WSSID %s \n", buf); + result = wlp_wss_enroll_discovered(wss, wssid); + } else { + d_printf(5, dev, "Request to enroll in WSSID %s with " + "registrar %02x:%02x\n", buf, devaddr->data[1], + devaddr->data[0]); + result = wlp_wss_enroll_target(wss, wssid, devaddr); + } + if (result < 0) { + dev_err(dev, "WLP: Unable to enroll into WSS %s, result %d \n", + buf, result); + goto error; + } + d_printf(2, dev, "Successfully enrolled into WSS %s \n", buf); + result = wlp_wss_sysfs_add(wss, buf); + if (result < 0) { + dev_err(dev, "WLP: Unable to set up sysfs for WSS kobject.\n"); + wlp_wss_reset(wss); + } +error: + return result; + +} + +/** + * Activate given WSS + * + * Prior to activation a WSS must be enrolled. To activate a WSS a device + * includes the WSS hash in the WLP IE in its beacon in each superframe. + * WLP 0.99 [7.2.5]. + * + * The WSS tag is also computed at this time. We only support one activated + * WSS so we can use the hash as a tag - there will never be a conflict. + * + * We currently only support one activated WSS so only one WSS hash is + * included in the WLP IE. + */ +static +int wlp_wss_activate(struct wlp_wss *wss) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + struct uwb_rc *uwb_rc = wlp->rc; + int result; + struct { + struct wlp_ie wlp_ie; + u8 hash; /* only include one hash */ + } ie_data; + + d_fnstart(5, dev, "Activating WSS %p. \n", wss); + BUG_ON(wss->state != WLP_WSS_STATE_ENROLLED); + wss->hash = wlp_wss_comp_wssid_hash(&wss->wssid); + wss->tag = wss->hash; + memset(&ie_data, 0, sizeof(ie_data)); + ie_data.wlp_ie.hdr.element_id = UWB_IE_WLP; + ie_data.wlp_ie.hdr.length = sizeof(ie_data) - sizeof(struct uwb_ie_hdr); + wlp_ie_set_hash_length(&ie_data.wlp_ie, sizeof(ie_data.hash)); + ie_data.hash = wss->hash; + result = uwb_rc_ie_add(uwb_rc, &ie_data.wlp_ie.hdr, + sizeof(ie_data)); + if (result < 0) { + dev_err(dev, "WLP: Unable to add WLP IE to beacon. " + "result = %d.\n", result); + goto error_wlp_ie; + } + wss->state = WLP_WSS_STATE_ACTIVE; + result = 0; +error_wlp_ie: + d_fnend(5, dev, "Activating WSS %p, result = %d \n", wss, result); + return result; +} + +/** + * Enroll in and activate WSS identified by provided WSSID + * + * The neighborhood cache should contain a list of all neighbors and the + * WSS they have activated. Based on that cache we search which neighbor we + * can perform the association process with. The user also has option to + * specify which neighbor it prefers as registrar. + * Successful enrollment is followed by activation. + * Successful activation will create the sysfs directory containing + * specific information regarding this WSS. + */ +int wlp_wss_enroll_activate(struct wlp_wss *wss, struct wlp_uuid *wssid, + struct uwb_dev_addr *devaddr) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = 0; + char buf[WLP_WSS_UUID_STRSIZE]; + + d_fnstart(5, dev, "Enrollment and activation requested. \n"); + mutex_lock(&wss->mutex); + result = wlp_wss_enroll(wss, wssid, devaddr); + if (result < 0) { + wlp_wss_uuid_print(buf, sizeof(buf), &wss->wssid); + dev_err(dev, "WLP: Enrollment into WSS %s failed.\n", buf); + goto error_enroll; + } + result = wlp_wss_activate(wss); + if (result < 0) { + dev_err(dev, "WLP: Unable to activate WSS. Undoing enrollment " + "result = %d \n", result); + /* Undo enrollment */ + wlp_wss_reset(wss); + goto error_activate; + } +error_activate: +error_enroll: + mutex_unlock(&wss->mutex); + d_fnend(5, dev, "Completed. result = %d \n", result); + return result; +} + +/** + * Create, enroll, and activate a new WSS + * + * @wssid: new wssid provided by user + * @name: WSS name requested by used. + * @sec_status: security status requested by user + * + * A user requested the creation of a new WSS. All operations are done + * locally. The new WSS will be stored locally, the hash will be included + * in the WLP IE, and the sysfs infrastructure for this WSS will be + * created. + */ +int wlp_wss_create_activate(struct wlp_wss *wss, struct wlp_uuid *wssid, + char *name, unsigned sec_status, unsigned accept) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = 0; + char buf[WLP_WSS_UUID_STRSIZE]; + d_fnstart(5, dev, "Request to create new WSS.\n"); + result = wlp_wss_uuid_print(buf, sizeof(buf), wssid); + d_printf(5, dev, "Request to create WSS: WSSID=%s, name=%s, " + "sec_status=%u, accepting enrollment=%u \n", + buf, name, sec_status, accept); + if (!mutex_trylock(&wss->mutex)) { + dev_err(dev, "WLP: WLP association session in progress.\n"); + return -EBUSY; + } + if (wss->state != WLP_WSS_STATE_NONE) { + dev_err(dev, "WLP: WSS already exists. Not creating new.\n"); + result = -EEXIST; + goto out; + } + if (wss->kobj.parent == NULL) { + dev_err(dev, "WLP: WSS parent not ready. Is network interface " + "up?\n"); + result = -ENXIO; + goto out; + } + if (sec_status == WLP_WSS_SECURE) { + dev_err(dev, "WLP: FIXME Creation of secure WSS not " + "supported yet.\n"); + result = -EINVAL; + goto out; + } + wss->wssid = *wssid; + memcpy(wss->name, name, sizeof(wss->name)); + wss->bcast = wlp_wss_sel_bcast_addr(wss); + wss->secure_status = sec_status; + wss->accept_enroll = accept; + /*wss->virtual_addr is initialized in call to wlp_wss_setup*/ + /* sysfs infrastructure */ + result = wlp_wss_sysfs_add(wss, buf); + if (result < 0) { + dev_err(dev, "Cannot set up sysfs for WSS kobject.\n"); + wlp_wss_reset(wss); + goto out; + } else + result = 0; + wss->state = WLP_WSS_STATE_ENROLLED; + result = wlp_wss_activate(wss); + if (result < 0) { + dev_err(dev, "WLP: Unable to activate WSS. Undoing " + "enrollment\n"); + wlp_wss_reset(wss); + goto out; + } + result = 0; +out: + mutex_unlock(&wss->mutex); + d_fnend(5, dev, "Completed. result = %d \n", result); + return result; +} + +/** + * Determine if neighbor has WSS activated + * + * @returns: 1 if neighbor has WSS activated, zero otherwise + * + * This can be done in two ways: + * - send a C1 frame, parse C2/F0 response + * - examine the WLP IE sent by the neighbor + * + * The WLP IE is not fully supported in hardware so we use the C1/C2 frame + * exchange to determine if a WSS is activated. Using the WLP IE should be + * faster and should be used when it becomes possible. + */ +int wlp_wss_is_active(struct wlp *wlp, struct wlp_wss *wss, + struct uwb_dev_addr *dev_addr) +{ + int result = 0; + struct device *dev = &wlp->rc->uwb_dev.dev; + char buf[WLP_WSS_UUID_STRSIZE]; + DECLARE_COMPLETION_ONSTACK(completion); + struct wlp_session session; + struct sk_buff *skb; + struct wlp_frame_assoc *resp; + struct wlp_uuid wssid; + + wlp_wss_uuid_print(buf, sizeof(buf), &wss->wssid); + d_fnstart(5, dev, "wlp %p, wss %p (wssid %s), neighbor %02x:%02x \n", + wlp, wss, buf, dev_addr->data[1], dev_addr->data[0]); + mutex_lock(&wlp->mutex); + /* Send C1 association frame */ + result = wlp_send_assoc_frame(wlp, wss, dev_addr, WLP_ASSOC_C1); + if (result < 0) { + dev_err(dev, "Unable to send C1 frame to neighbor " + "%02x:%02x (%d)\n", dev_addr->data[1], + dev_addr->data[0], result); + result = 0; + goto out; + } + /* Create session, wait for response */ + session.exp_message = WLP_ASSOC_C2; + session.cb = wlp_session_cb; + session.cb_priv = &completion; + session.neighbor_addr = *dev_addr; + BUG_ON(wlp->session != NULL); + wlp->session = &session; + /* Wait for C2/F0 frame */ + result = wait_for_completion_interruptible_timeout(&completion, + WLP_PER_MSG_TIMEOUT * HZ); + if (result == 0) { + dev_err(dev, "Timeout while sending C1 to neighbor " + "%02x:%02x.\n", dev_addr->data[1], + dev_addr->data[0]); + goto out; + } + if (result < 0) { + dev_err(dev, "Unable to send C1 to neighbor %02x:%02x.\n", + dev_addr->data[1], dev_addr->data[0]); + result = 0; + goto out; + } + /* Parse message in session->data: it will be either C2 or F0 */ + skb = session.data; + resp = (void *) skb->data; + d_printf(5, dev, "Received response to C1 frame. \n"); + d_dump(5, dev, skb->data, skb->len > 72 ? 72 : skb->len); + if (resp->type == WLP_ASSOC_F0) { + result = wlp_parse_f0(wlp, skb); + if (result < 0) + dev_err(dev, "WLP: unable to parse incoming F0 " + "frame from neighbor %02x:%02x.\n", + dev_addr->data[1], dev_addr->data[0]); + result = 0; + goto error_resp_parse; + } + /* WLP version and message type fields have already been parsed */ + result = wlp_get_wssid(wlp, (void *)resp + sizeof(*resp), &wssid, + skb->len - sizeof(*resp)); + if (result < 0) { + dev_err(dev, "WLP: unable to obtain WSSID from C2 frame.\n"); + result = 0; + goto error_resp_parse; + } + if (!memcmp(&wssid, &wss->wssid, sizeof(wssid))) { + d_printf(5, dev, "WSSID in C2 frame matches local " + "active WSS.\n"); + result = 1; + } else { + dev_err(dev, "WLP: Received a C2 frame without matching " + "WSSID.\n"); + result = 0; + } +error_resp_parse: + kfree_skb(skb); +out: + wlp->session = NULL; + mutex_unlock(&wlp->mutex); + d_fnend(5, dev, "wlp %p, wss %p (wssid %s), neighbor %02x:%02x \n", + wlp, wss, buf, dev_addr->data[1], dev_addr->data[0]); + return result; +} + +/** + * Activate connection with neighbor by updating EDA cache + * + * @wss: local WSS to which neighbor wants to connect + * @dev_addr: neighbor's address + * @wssid: neighbor's WSSID - must be same as our WSS's WSSID + * @tag: neighbor's WSS tag used to identify frames transmitted by it + * @virt_addr: neighbor's virtual EUI-48 + */ +static +int wlp_wss_activate_connection(struct wlp *wlp, struct wlp_wss *wss, + struct uwb_dev_addr *dev_addr, + struct wlp_uuid *wssid, u8 *tag, + struct uwb_mac_addr *virt_addr) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = 0; + char buf[WLP_WSS_UUID_STRSIZE]; + wlp_wss_uuid_print(buf, sizeof(buf), wssid); + d_fnstart(5, dev, "wlp %p, wss %p, wssid %s, tag %u, virtual " + "%02x:%02x:%02x:%02x:%02x:%02x \n", wlp, wss, buf, *tag, + virt_addr->data[0], virt_addr->data[1], virt_addr->data[2], + virt_addr->data[3], virt_addr->data[4], virt_addr->data[5]); + + if (!memcmp(wssid, &wss->wssid, sizeof(*wssid))) { + d_printf(5, dev, "WSSID from neighbor frame matches local " + "active WSS.\n"); + /* Update EDA cache */ + result = wlp_eda_update_node(&wlp->eda, dev_addr, wss, + (void *) virt_addr->data, *tag, + WLP_WSS_CONNECTED); + if (result < 0) + dev_err(dev, "WLP: Unable to update EDA cache " + "with new connected neighbor information.\n"); + } else { + dev_err(dev, "WLP: Neighbor does not have matching " + "WSSID.\n"); + result = -EINVAL; + } + + d_fnend(5, dev, "wlp %p, wss %p, wssid %s, tag %u, virtual " + "%02x:%02x:%02x:%02x:%02x:%02x, result = %d \n", + wlp, wss, buf, *tag, + virt_addr->data[0], virt_addr->data[1], virt_addr->data[2], + virt_addr->data[3], virt_addr->data[4], virt_addr->data[5], + result); + + return result; +} + +/** + * Connect to WSS neighbor + * + * Use C3/C4 exchange to determine if neighbor has WSS activated and + * retrieve the WSS tag and virtual EUI-48 of the neighbor. + */ +static +int wlp_wss_connect_neighbor(struct wlp *wlp, struct wlp_wss *wss, + struct uwb_dev_addr *dev_addr) +{ + int result; + struct device *dev = &wlp->rc->uwb_dev.dev; + char buf[WLP_WSS_UUID_STRSIZE]; + struct wlp_uuid wssid; + u8 tag; + struct uwb_mac_addr virt_addr; + DECLARE_COMPLETION_ONSTACK(completion); + struct wlp_session session; + struct wlp_frame_assoc *resp; + struct sk_buff *skb; + + wlp_wss_uuid_print(buf, sizeof(buf), &wss->wssid); + d_fnstart(5, dev, "wlp %p, wss %p (wssid %s), neighbor %02x:%02x \n", + wlp, wss, buf, dev_addr->data[1], dev_addr->data[0]); + mutex_lock(&wlp->mutex); + /* Send C3 association frame */ + result = wlp_send_assoc_frame(wlp, wss, dev_addr, WLP_ASSOC_C3); + if (result < 0) { + dev_err(dev, "Unable to send C3 frame to neighbor " + "%02x:%02x (%d)\n", dev_addr->data[1], + dev_addr->data[0], result); + goto out; + } + /* Create session, wait for response */ + session.exp_message = WLP_ASSOC_C4; + session.cb = wlp_session_cb; + session.cb_priv = &completion; + session.neighbor_addr = *dev_addr; + BUG_ON(wlp->session != NULL); + wlp->session = &session; + /* Wait for C4/F0 frame */ + result = wait_for_completion_interruptible_timeout(&completion, + WLP_PER_MSG_TIMEOUT * HZ); + if (result == 0) { + dev_err(dev, "Timeout while sending C3 to neighbor " + "%02x:%02x.\n", dev_addr->data[1], + dev_addr->data[0]); + result = -ETIMEDOUT; + goto out; + } + if (result < 0) { + dev_err(dev, "Unable to send C3 to neighbor %02x:%02x.\n", + dev_addr->data[1], dev_addr->data[0]); + goto out; + } + /* Parse message in session->data: it will be either C4 or F0 */ + skb = session.data; + resp = (void *) skb->data; + d_printf(5, dev, "Received response to C3 frame. \n"); + d_dump(5, dev, skb->data, skb->len > 72 ? 72 : skb->len); + if (resp->type == WLP_ASSOC_F0) { + result = wlp_parse_f0(wlp, skb); + if (result < 0) + dev_err(dev, "WLP: unable to parse incoming F0 " + "frame from neighbor %02x:%02x.\n", + dev_addr->data[1], dev_addr->data[0]); + result = -EINVAL; + goto error_resp_parse; + } + result = wlp_parse_c3c4_frame(wlp, skb, &wssid, &tag, &virt_addr); + if (result < 0) { + dev_err(dev, "WLP: Unable to parse C4 frame from neighbor.\n"); + goto error_resp_parse; + } + result = wlp_wss_activate_connection(wlp, wss, dev_addr, &wssid, &tag, + &virt_addr); + if (result < 0) { + dev_err(dev, "WLP: Unable to activate connection to " + "neighbor %02x:%02x.\n", dev_addr->data[1], + dev_addr->data[0]); + goto error_resp_parse; + } +error_resp_parse: + kfree_skb(skb); +out: + /* Record that we unsuccessfully tried to connect to this neighbor */ + if (result < 0) + wlp_eda_update_node_state(&wlp->eda, dev_addr, + WLP_WSS_CONNECT_FAILED); + wlp->session = NULL; + mutex_unlock(&wlp->mutex); + d_fnend(5, dev, "wlp %p, wss %p (wssid %s), neighbor %02x:%02x \n", + wlp, wss, buf, dev_addr->data[1], dev_addr->data[0]); + return result; +} + +/** + * Connect to neighbor with common WSS, send pending frame + * + * This function is scheduled when a frame is destined to a neighbor with + * which we do not have a connection. A copy of the EDA cache entry is + * provided - not the actual cache entry (because it is protected by a + * spinlock). + * + * First determine if neighbor has the same WSS activated, connect if it + * does. The C3/C4 exchange is dual purpose to determine if neighbor has + * WSS activated and proceed with the connection. + * + * The frame that triggered the connection setup is sent after connection + * setup. + * + * network queue is stopped - we need to restart when done + * + */ +static +void wlp_wss_connect_send(struct work_struct *ws) +{ + struct wlp_assoc_conn_ctx *conn_ctx = container_of(ws, + struct wlp_assoc_conn_ctx, + ws); + struct wlp *wlp = conn_ctx->wlp; + struct sk_buff *skb = conn_ctx->skb; + struct wlp_eda_node *eda_entry = &conn_ctx->eda_entry; + struct uwb_dev_addr *dev_addr = &eda_entry->dev_addr; + struct wlp_wss *wss = &wlp->wss; + int result; + struct device *dev = &wlp->rc->uwb_dev.dev; + char buf[WLP_WSS_UUID_STRSIZE]; + + mutex_lock(&wss->mutex); + wlp_wss_uuid_print(buf, sizeof(buf), &wss->wssid); + d_fnstart(5, dev, "wlp %p, wss %p (wssid %s), neighbor %02x:%02x \n", + wlp, wss, buf, dev_addr->data[1], dev_addr->data[0]); + if (wss->state < WLP_WSS_STATE_ACTIVE) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Attempting to connect with " + "WSS that is not active or connected.\n"); + dev_kfree_skb(skb); + goto out; + } + /* Establish connection - send C3 rcv C4 */ + result = wlp_wss_connect_neighbor(wlp, wss, dev_addr); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Unable to establish connection " + "with neighbor %02x:%02x.\n", + dev_addr->data[1], dev_addr->data[0]); + dev_kfree_skb(skb); + goto out; + } + /* EDA entry changed, update the local copy being used */ + result = wlp_copy_eda_node(&wlp->eda, dev_addr, eda_entry); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Cannot find EDA entry for " + "neighbor %02x:%02x \n", + dev_addr->data[1], dev_addr->data[0]); + } + result = wlp_wss_prep_hdr(wlp, eda_entry, skb); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Unable to prepare frame header for " + "transmission (neighbor %02x:%02x). \n", + dev_addr->data[1], dev_addr->data[0]); + dev_kfree_skb(skb); + goto out; + } + BUG_ON(wlp->xmit_frame == NULL); + result = wlp->xmit_frame(wlp, skb, dev_addr); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Unable to transmit frame: %d\n", + result); + if (result == -ENXIO) + dev_err(dev, "WLP: Is network interface up? \n"); + /* We could try again ... */ + dev_kfree_skb(skb);/*we need to free if tx fails */ + } +out: + kfree(conn_ctx); + BUG_ON(wlp->start_queue == NULL); + wlp->start_queue(wlp); + mutex_unlock(&wss->mutex); + d_fnend(5, dev, "wlp %p, wss %p (wssid %s)\n", wlp, wss, buf); +} + +/** + * Add WLP header to outgoing skb + * + * @eda_entry: pointer to neighbor's entry in the EDA cache + * @_skb: skb containing data destined to the neighbor + */ +int wlp_wss_prep_hdr(struct wlp *wlp, struct wlp_eda_node *eda_entry, + void *_skb) +{ + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = 0; + unsigned char *eth_addr = eda_entry->eth_addr; + struct uwb_dev_addr *dev_addr = &eda_entry->dev_addr; + struct sk_buff *skb = _skb; + struct wlp_frame_std_abbrv_hdr *std_hdr; + + d_fnstart(6, dev, "wlp %p \n", wlp); + if (eda_entry->state == WLP_WSS_CONNECTED) { + /* Add WLP header */ + BUG_ON(skb_headroom(skb) < sizeof(*std_hdr)); + std_hdr = (void *) __skb_push(skb, sizeof(*std_hdr)); + std_hdr->hdr.mux_hdr = cpu_to_le16(WLP_PROTOCOL_ID); + std_hdr->hdr.type = WLP_FRAME_STANDARD; + std_hdr->tag = eda_entry->wss->tag; + } else { + if (printk_ratelimit()) + dev_err(dev, "WLP: Destination neighbor (Ethernet: " + "%02x:%02x:%02x:%02x:%02x:%02x, Dev: " + "%02x:%02x) is not connected. \n", eth_addr[0], + eth_addr[1], eth_addr[2], eth_addr[3], + eth_addr[4], eth_addr[5], dev_addr->data[1], + dev_addr->data[0]); + result = -EINVAL; + } + d_fnend(6, dev, "wlp %p \n", wlp); + return result; +} + + +/** + * Prepare skb for neighbor: connect if not already and prep WLP header + * + * This function is called in interrupt context, but it needs to sleep. We + * temporarily stop the net queue to establish the WLP connection. + * Setup of the WLP connection and restart of queue is scheduled + * on the default work queue. + * + * run with eda->lock held (spinlock) + */ +int wlp_wss_connect_prep(struct wlp *wlp, struct wlp_eda_node *eda_entry, + void *_skb) +{ + int result = 0; + struct device *dev = &wlp->rc->uwb_dev.dev; + struct uwb_dev_addr *dev_addr = &eda_entry->dev_addr; + unsigned char *eth_addr = eda_entry->eth_addr; + struct sk_buff *skb = _skb; + struct wlp_assoc_conn_ctx *conn_ctx; + + d_fnstart(5, dev, "wlp %p\n", wlp); + d_printf(5, dev, "To neighbor %02x:%02x with eth " + "%02x:%02x:%02x:%02x:%02x:%02x\n", dev_addr->data[1], + dev_addr->data[0], eth_addr[0], eth_addr[1], eth_addr[2], + eth_addr[3], eth_addr[4], eth_addr[5]); + if (eda_entry->state == WLP_WSS_UNCONNECTED) { + /* We don't want any more packets while we set up connection */ + BUG_ON(wlp->stop_queue == NULL); + wlp->stop_queue(wlp); + conn_ctx = kmalloc(sizeof(*conn_ctx), GFP_ATOMIC); + if (conn_ctx == NULL) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Unable to allocate memory " + "for connection handling.\n"); + result = -ENOMEM; + goto out; + } + conn_ctx->wlp = wlp; + conn_ctx->skb = skb; + conn_ctx->eda_entry = *eda_entry; + INIT_WORK(&conn_ctx->ws, wlp_wss_connect_send); + schedule_work(&conn_ctx->ws); + result = 1; + } else if (eda_entry->state == WLP_WSS_CONNECT_FAILED) { + /* Previous connection attempts failed, don't retry - see + * conditions for connection in WLP 0.99 [7.6.2] */ + if (printk_ratelimit()) + dev_err(dev, "Could not connect to neighbor " + "previously. Not retrying. \n"); + result = -ENONET; + goto out; + } else { /* eda_entry->state == WLP_WSS_CONNECTED */ + d_printf(5, dev, "Neighbor is connected, preparing frame.\n"); + result = wlp_wss_prep_hdr(wlp, eda_entry, skb); + } +out: + d_fnend(5, dev, "wlp %p, result = %d \n", wlp, result); + return result; +} + +/** + * Emulate broadcast: copy skb, send copy to neighbor (connect if not already) + * + * We need to copy skbs in the case where we emulate broadcast through + * unicast. We copy instead of clone because we are modifying the data of + * the frame after copying ... clones share data so we cannot emulate + * broadcast using clones. + * + * run with eda->lock held (spinlock) + */ +int wlp_wss_send_copy(struct wlp *wlp, struct wlp_eda_node *eda_entry, + void *_skb) +{ + int result = -ENOMEM; + struct device *dev = &wlp->rc->uwb_dev.dev; + struct sk_buff *skb = _skb; + struct sk_buff *copy; + struct uwb_dev_addr *dev_addr = &eda_entry->dev_addr; + + d_fnstart(5, dev, "to neighbor %02x:%02x, skb (%p) \n", + dev_addr->data[1], dev_addr->data[0], skb); + copy = skb_copy(skb, GFP_ATOMIC); + if (copy == NULL) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Unable to copy skb for " + "transmission.\n"); + goto out; + } + result = wlp_wss_connect_prep(wlp, eda_entry, copy); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Unable to connect/send skb " + "to neighbor.\n"); + dev_kfree_skb_irq(copy); + goto out; + } else if (result == 1) + /* Frame will be transmitted separately */ + goto out; + BUG_ON(wlp->xmit_frame == NULL); + result = wlp->xmit_frame(wlp, copy, dev_addr); + if (result < 0) { + if (printk_ratelimit()) + dev_err(dev, "WLP: Unable to transmit frame: %d\n", + result); + if ((result == -ENXIO) && printk_ratelimit()) + dev_err(dev, "WLP: Is network interface up? \n"); + /* We could try again ... */ + dev_kfree_skb_irq(copy);/*we need to free if tx fails */ + } +out: + d_fnend(5, dev, "to neighbor %02x:%02x \n", dev_addr->data[1], + dev_addr->data[0]); + return result; +} + + +/** + * Setup WSS + * + * Should be called by network driver after the interface has been given a + * MAC address. + */ +int wlp_wss_setup(struct net_device *net_dev, struct wlp_wss *wss) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + int result = 0; + d_fnstart(5, dev, "wss (%p) \n", wss); + mutex_lock(&wss->mutex); + wss->kobj.parent = &net_dev->dev.kobj; + if (!is_valid_ether_addr(net_dev->dev_addr)) { + dev_err(dev, "WLP: Invalid MAC address. Cannot use for" + "virtual.\n"); + result = -EINVAL; + goto out; + } + memcpy(wss->virtual_addr.data, net_dev->dev_addr, + sizeof(wss->virtual_addr.data)); +out: + mutex_unlock(&wss->mutex); + d_fnend(5, dev, "wss (%p) \n", wss); + return result; +} +EXPORT_SYMBOL_GPL(wlp_wss_setup); + +/** + * Remove WSS + * + * Called by client that configured WSS through wlp_wss_setup(). This + * function is called when client no longer needs WSS, eg. client shuts + * down. + * + * We remove the WLP IE from the beacon before initiating local cleanup. + */ +void wlp_wss_remove(struct wlp_wss *wss) +{ + struct wlp *wlp = container_of(wss, struct wlp, wss); + struct device *dev = &wlp->rc->uwb_dev.dev; + d_fnstart(5, dev, "wss (%p) \n", wss); + mutex_lock(&wss->mutex); + if (wss->state == WLP_WSS_STATE_ACTIVE) + uwb_rc_ie_rm(wlp->rc, UWB_IE_WLP); + if (wss->state != WLP_WSS_STATE_NONE) { + sysfs_remove_group(&wss->kobj, &wss_attr_group); + kobject_put(&wss->kobj); + } + wss->kobj.parent = NULL; + memset(&wss->virtual_addr, 0, sizeof(wss->virtual_addr)); + /* Cleanup EDA cache */ + wlp_eda_release(&wlp->eda); + wlp_eda_init(&wlp->eda); + mutex_unlock(&wss->mutex); + d_fnend(5, dev, "wss (%p) \n", wss); +} +EXPORT_SYMBOL_GPL(wlp_wss_remove); diff --git a/drivers/watchdog/w83697ug_wdt.c b/drivers/watchdog/w83697ug_wdt.c index c73b5e2919c6..ada8ad82d993 100644 --- a/drivers/watchdog/w83697ug_wdt.c +++ b/drivers/watchdog/w83697ug_wdt.c @@ -102,7 +102,7 @@ static void w83697ug_select_wd_register(void) } else { printk(KERN_ERR PFX "No W83697UG/UF could be found\n"); - return -EIO; + return; } outb_p(0x07, WDT_EFER); /* point to logical device number reg */ diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c index 041c52692284..68bf2af6c389 100644 --- a/fs/9p/vfs_file.c +++ b/fs/9p/vfs_file.c @@ -178,7 +178,7 @@ v9fs_file_read(struct file *filp, char __user *udata, size_t count, int ret; struct p9_fid *fid; - P9_DPRINTK(P9_DEBUG_VFS, "count %d offset %lld\n", count, *offset); + P9_DPRINTK(P9_DEBUG_VFS, "count %zu offset %lld\n", count, *offset); fid = filp->private_data; if (count > (fid->clnt->msize - P9_IOHDRSZ)) diff --git a/fs/ext3/ioctl.c b/fs/ext3/ioctl.c index 0d0c70151642..b7394d05ee8e 100644 --- a/fs/ext3/ioctl.c +++ b/fs/ext3/ioctl.c @@ -239,7 +239,7 @@ setrsvsz_out: case EXT3_IOC_GROUP_EXTEND: { ext3_fsblk_t n_blocks_count; struct super_block *sb = inode->i_sb; - int err; + int err, err2; if (!capable(CAP_SYS_RESOURCE)) return -EPERM; @@ -254,8 +254,10 @@ setrsvsz_out: } err = ext3_group_extend(sb, EXT3_SB(sb)->s_es, n_blocks_count); journal_lock_updates(EXT3_SB(sb)->s_journal); - journal_flush(EXT3_SB(sb)->s_journal); + err2 = journal_flush(EXT3_SB(sb)->s_journal); journal_unlock_updates(EXT3_SB(sb)->s_journal); + if (err == 0) + err = err2; group_extend_out: mnt_drop_write(filp->f_path.mnt); return err; @@ -263,7 +265,7 @@ group_extend_out: case EXT3_IOC_GROUP_ADD: { struct ext3_new_group_data input; struct super_block *sb = inode->i_sb; - int err; + int err, err2; if (!capable(CAP_SYS_RESOURCE)) return -EPERM; @@ -280,8 +282,10 @@ group_extend_out: err = ext3_group_add(sb, &input); journal_lock_updates(EXT3_SB(sb)->s_journal); - journal_flush(EXT3_SB(sb)->s_journal); + err2 = journal_flush(EXT3_SB(sb)->s_journal); journal_unlock_updates(EXT3_SB(sb)->s_journal); + if (err == 0) + err = err2; group_add_out: mnt_drop_write(filp->f_path.mnt); return err; diff --git a/fs/ext3/super.c b/fs/ext3/super.c index 3a260af5544d..cac29ee3b14a 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -393,7 +393,8 @@ static void ext3_put_super (struct super_block * sb) int i; ext3_xattr_put_super(sb); - journal_destroy(sbi->s_journal); + if (journal_destroy(sbi->s_journal) < 0) + ext3_abort(sb, __func__, "Couldn't clean up the journal"); if (!(sb->s_flags & MS_RDONLY)) { EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); es->s_state = cpu_to_le16(sbi->s_mount_state); @@ -2296,7 +2297,9 @@ static void ext3_mark_recovery_complete(struct super_block * sb, journal_t *journal = EXT3_SB(sb)->s_journal; journal_lock_updates(journal); - journal_flush(journal); + if (journal_flush(journal) < 0) + goto out; + lock_super(sb); if (EXT3_HAS_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER) && sb->s_flags & MS_RDONLY) { @@ -2305,6 +2308,8 @@ static void ext3_mark_recovery_complete(struct super_block * sb, ext3_commit_super(sb, es, 1); } unlock_super(sb); + +out: journal_unlock_updates(journal); } @@ -2404,7 +2409,13 @@ static void ext3_write_super_lockfs(struct super_block *sb) /* Now we set up the journal barrier. */ journal_lock_updates(journal); - journal_flush(journal); + + /* + * We don't want to clear needs_recovery flag when we failed + * to flush the journal. + */ + if (journal_flush(journal) < 0) + return; /* Journal blocked and flushed, clear needs_recovery flag. */ EXT3_CLEAR_INCOMPAT_FEATURE(sb, EXT3_FEATURE_INCOMPAT_RECOVER); @@ -2822,8 +2833,12 @@ static int ext3_quota_on(struct super_block *sb, int type, int format_id, * otherwise be livelocked... */ journal_lock_updates(EXT3_SB(sb)->s_journal); - journal_flush(EXT3_SB(sb)->s_journal); + err = journal_flush(EXT3_SB(sb)->s_journal); journal_unlock_updates(EXT3_SB(sb)->s_journal); + if (err) { + path_put(&nd.path); + return err; + } } err = vfs_quota_on_path(sb, type, format_id, &nd.path); diff --git a/fs/jbd/checkpoint.c b/fs/jbd/checkpoint.c index a5432bbbfb88..1bd8d4acc6f2 100644 --- a/fs/jbd/checkpoint.c +++ b/fs/jbd/checkpoint.c @@ -93,7 +93,8 @@ static int __try_to_free_cp_buf(struct journal_head *jh) int ret = 0; struct buffer_head *bh = jh2bh(jh); - if (jh->b_jlist == BJ_None && !buffer_locked(bh) && !buffer_dirty(bh)) { + if (jh->b_jlist == BJ_None && !buffer_locked(bh) && + !buffer_dirty(bh) && !buffer_write_io_error(bh)) { JBUFFER_TRACE(jh, "remove from checkpoint list"); ret = __journal_remove_checkpoint(jh) + 1; jbd_unlock_bh_state(bh); @@ -126,14 +127,29 @@ void __log_wait_for_space(journal_t *journal) /* * Test again, another process may have checkpointed while we - * were waiting for the checkpoint lock + * were waiting for the checkpoint lock. If there are no + * outstanding transactions there is nothing to checkpoint and + * we can't make progress. Abort the journal in this case. */ spin_lock(&journal->j_state_lock); + spin_lock(&journal->j_list_lock); nblocks = jbd_space_needed(journal); if (__log_space_left(journal) < nblocks) { + int chkpt = journal->j_checkpoint_transactions != NULL; + + spin_unlock(&journal->j_list_lock); spin_unlock(&journal->j_state_lock); - log_do_checkpoint(journal); + if (chkpt) { + log_do_checkpoint(journal); + } else { + printk(KERN_ERR "%s: no transactions\n", + __func__); + journal_abort(journal, 0); + } + spin_lock(&journal->j_state_lock); + } else { + spin_unlock(&journal->j_list_lock); } mutex_unlock(&journal->j_checkpoint_mutex); } @@ -160,21 +176,25 @@ static void jbd_sync_bh(journal_t *journal, struct buffer_head *bh) * buffers. Note that we take the buffers in the opposite ordering * from the one in which they were submitted for IO. * + * Return 0 on success, and return <0 if some buffers have failed + * to be written out. + * * Called with j_list_lock held. */ -static void __wait_cp_io(journal_t *journal, transaction_t *transaction) +static int __wait_cp_io(journal_t *journal, transaction_t *transaction) { struct journal_head *jh; struct buffer_head *bh; tid_t this_tid; int released = 0; + int ret = 0; this_tid = transaction->t_tid; restart: /* Did somebody clean up the transaction in the meanwhile? */ if (journal->j_checkpoint_transactions != transaction || transaction->t_tid != this_tid) - return; + return ret; while (!released && transaction->t_checkpoint_io_list) { jh = transaction->t_checkpoint_io_list; bh = jh2bh(jh); @@ -194,6 +214,9 @@ restart: spin_lock(&journal->j_list_lock); goto restart; } + if (unlikely(buffer_write_io_error(bh))) + ret = -EIO; + /* * Now in whatever state the buffer currently is, we know that * it has been written out and so we can drop it from the list @@ -203,6 +226,8 @@ restart: journal_remove_journal_head(bh); __brelse(bh); } + + return ret; } #define NR_BATCH 64 @@ -226,7 +251,8 @@ __flush_batch(journal_t *journal, struct buffer_head **bhs, int *batch_count) * Try to flush one buffer from the checkpoint list to disk. * * Return 1 if something happened which requires us to abort the current - * scan of the checkpoint list. + * scan of the checkpoint list. Return <0 if the buffer has failed to + * be written out. * * Called with j_list_lock held and drops it if 1 is returned * Called under jbd_lock_bh_state(jh2bh(jh)), and drops it @@ -256,6 +282,9 @@ static int __process_buffer(journal_t *journal, struct journal_head *jh, log_wait_commit(journal, tid); ret = 1; } else if (!buffer_dirty(bh)) { + ret = 1; + if (unlikely(buffer_write_io_error(bh))) + ret = -EIO; J_ASSERT_JH(jh, !buffer_jbddirty(bh)); BUFFER_TRACE(bh, "remove from checkpoint"); __journal_remove_checkpoint(jh); @@ -263,7 +292,6 @@ static int __process_buffer(journal_t *journal, struct journal_head *jh, jbd_unlock_bh_state(bh); journal_remove_journal_head(bh); __brelse(bh); - ret = 1; } else { /* * Important: we are about to write the buffer, and @@ -295,6 +323,7 @@ static int __process_buffer(journal_t *journal, struct journal_head *jh, * to disk. We submit larger chunks of data at once. * * The journal should be locked before calling this function. + * Called with j_checkpoint_mutex held. */ int log_do_checkpoint(journal_t *journal) { @@ -318,6 +347,7 @@ int log_do_checkpoint(journal_t *journal) * OK, we need to start writing disk blocks. Take one transaction * and write it. */ + result = 0; spin_lock(&journal->j_list_lock); if (!journal->j_checkpoint_transactions) goto out; @@ -334,7 +364,7 @@ restart: int batch_count = 0; struct buffer_head *bhs[NR_BATCH]; struct journal_head *jh; - int retry = 0; + int retry = 0, err; while (!retry && transaction->t_checkpoint_list) { struct buffer_head *bh; @@ -347,6 +377,8 @@ restart: break; } retry = __process_buffer(journal, jh, bhs,&batch_count); + if (retry < 0 && !result) + result = retry; if (!retry && (need_resched() || spin_needbreak(&journal->j_list_lock))) { spin_unlock(&journal->j_list_lock); @@ -371,14 +403,18 @@ restart: * Now we have cleaned up the first transaction's checkpoint * list. Let's clean up the second one */ - __wait_cp_io(journal, transaction); + err = __wait_cp_io(journal, transaction); + if (!result) + result = err; } out: spin_unlock(&journal->j_list_lock); - result = cleanup_journal_tail(journal); if (result < 0) - return result; - return 0; + journal_abort(journal, result); + else + result = cleanup_journal_tail(journal); + + return (result < 0) ? result : 0; } /* @@ -394,8 +430,9 @@ out: * This is the only part of the journaling code which really needs to be * aware of transaction aborts. Checkpointing involves writing to the * main filesystem area rather than to the journal, so it can proceed - * even in abort state, but we must not update the journal superblock if - * we have an abort error outstanding. + * even in abort state, but we must not update the super block if + * checkpointing may have failed. Otherwise, we would lose some metadata + * buffers which should be written-back to the filesystem. */ int cleanup_journal_tail(journal_t *journal) @@ -404,6 +441,9 @@ int cleanup_journal_tail(journal_t *journal) tid_t first_tid; unsigned long blocknr, freed; + if (is_journal_aborted(journal)) + return 1; + /* OK, work out the oldest transaction remaining in the log, and * the log block it starts at. * diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c index aa7143a8349b..9e4fa52d7dc8 100644 --- a/fs/jbd/journal.c +++ b/fs/jbd/journal.c @@ -1121,9 +1121,12 @@ recovery_error: * * Release a journal_t structure once it is no longer in use by the * journaled object. + * Return <0 if we couldn't clean up the journal. */ -void journal_destroy(journal_t *journal) +int journal_destroy(journal_t *journal) { + int err = 0; + /* Wait for the commit thread to wake up and die. */ journal_kill_thread(journal); @@ -1146,11 +1149,16 @@ void journal_destroy(journal_t *journal) J_ASSERT(journal->j_checkpoint_transactions == NULL); spin_unlock(&journal->j_list_lock); - /* We can now mark the journal as empty. */ - journal->j_tail = 0; - journal->j_tail_sequence = ++journal->j_transaction_sequence; if (journal->j_sb_buffer) { - journal_update_superblock(journal, 1); + if (!is_journal_aborted(journal)) { + /* We can now mark the journal as empty. */ + journal->j_tail = 0; + journal->j_tail_sequence = + ++journal->j_transaction_sequence; + journal_update_superblock(journal, 1); + } else { + err = -EIO; + } brelse(journal->j_sb_buffer); } @@ -1160,6 +1168,8 @@ void journal_destroy(journal_t *journal) journal_destroy_revoke(journal); kfree(journal->j_wbuf); kfree(journal); + + return err; } @@ -1359,10 +1369,16 @@ int journal_flush(journal_t *journal) spin_lock(&journal->j_list_lock); while (!err && journal->j_checkpoint_transactions != NULL) { spin_unlock(&journal->j_list_lock); + mutex_lock(&journal->j_checkpoint_mutex); err = log_do_checkpoint(journal); + mutex_unlock(&journal->j_checkpoint_mutex); spin_lock(&journal->j_list_lock); } spin_unlock(&journal->j_list_lock); + + if (is_journal_aborted(journal)) + return -EIO; + cleanup_journal_tail(journal); /* Finally, mark the journal as really needing no recovery. @@ -1384,7 +1400,7 @@ int journal_flush(journal_t *journal) J_ASSERT(journal->j_head == journal->j_tail); J_ASSERT(journal->j_tail_sequence == journal->j_transaction_sequence); spin_unlock(&journal->j_state_lock); - return err; + return 0; } /** diff --git a/fs/jbd/recovery.c b/fs/jbd/recovery.c index 43bc5e5ed064..db5e982c5ddf 100644 --- a/fs/jbd/recovery.c +++ b/fs/jbd/recovery.c @@ -223,7 +223,7 @@ do { \ */ int journal_recover(journal_t *journal) { - int err; + int err, err2; journal_superblock_t * sb; struct recovery_info info; @@ -261,7 +261,10 @@ int journal_recover(journal_t *journal) journal->j_transaction_sequence = ++info.end_transaction; journal_clear_revoke(journal); - sync_blockdev(journal->j_fs_dev); + err2 = sync_blockdev(journal->j_fs_dev); + if (!err) + err = err2; + return err; } diff --git a/fs/nfsd/export.c b/fs/nfsd/export.c index 9dc036f18356..5cd882b8871a 100644 --- a/fs/nfsd/export.c +++ b/fs/nfsd/export.c @@ -99,7 +99,7 @@ static int expkey_parse(struct cache_detail *cd, char *mesg, int mlen) int fsidtype; char *ep; struct svc_expkey key; - struct svc_expkey *ek; + struct svc_expkey *ek = NULL; if (mesg[mlen-1] != '\n') return -EINVAL; @@ -107,7 +107,8 @@ static int expkey_parse(struct cache_detail *cd, char *mesg, int mlen) buf = kmalloc(PAGE_SIZE, GFP_KERNEL); err = -ENOMEM; - if (!buf) goto out; + if (!buf) + goto out; err = -EINVAL; if ((len=qword_get(&mesg, buf, PAGE_SIZE)) <= 0) @@ -151,16 +152,16 @@ static int expkey_parse(struct cache_detail *cd, char *mesg, int mlen) /* now we want a pathname, or empty meaning NEGATIVE */ err = -EINVAL; - if ((len=qword_get(&mesg, buf, PAGE_SIZE)) < 0) + len = qword_get(&mesg, buf, PAGE_SIZE); + if (len < 0) goto out; dprintk("Path seems to be <%s>\n", buf); err = 0; if (len == 0) { set_bit(CACHE_NEGATIVE, &key.h.flags); ek = svc_expkey_update(&key, ek); - if (ek) - cache_put(&ek->h, &svc_expkey_cache); - else err = -ENOMEM; + if (!ek) + err = -ENOMEM; } else { struct nameidata nd; err = path_lookup(buf, 0, &nd); @@ -171,14 +172,14 @@ static int expkey_parse(struct cache_detail *cd, char *mesg, int mlen) key.ek_path = nd.path; ek = svc_expkey_update(&key, ek); - if (ek) - cache_put(&ek->h, &svc_expkey_cache); - else + if (!ek) err = -ENOMEM; path_put(&nd.path); } cache_flush(); out: + if (ek) + cache_put(&ek->h, &svc_expkey_cache); if (dom) auth_domain_put(dom); kfree(buf); diff --git a/fs/nfsd/nfssvc.c b/fs/nfsd/nfssvc.c index 59eeb46f82c5..07e4f5d7baa8 100644 --- a/fs/nfsd/nfssvc.c +++ b/fs/nfsd/nfssvc.c @@ -249,6 +249,10 @@ static int nfsd_init_socks(int port) if (error < 0) return error; + error = lockd_up(); + if (error < 0) + return error; + error = svc_create_xprt(nfsd_serv, "tcp", port, SVC_SOCK_DEFAULTS); if (error < 0) diff --git a/fs/nfsd/vfs.c b/fs/nfsd/vfs.c index aa1d0d6489a1..9609eb51d727 100644 --- a/fs/nfsd/vfs.c +++ b/fs/nfsd/vfs.c @@ -410,6 +410,7 @@ out_nfserr: static ssize_t nfsd_getxattr(struct dentry *dentry, char *key, void **buf) { ssize_t buflen; + ssize_t ret; buflen = vfs_getxattr(dentry, key, NULL, 0); if (buflen <= 0) @@ -419,7 +420,10 @@ static ssize_t nfsd_getxattr(struct dentry *dentry, char *key, void **buf) if (!*buf) return -ENOMEM; - return vfs_getxattr(dentry, key, *buf, buflen); + ret = vfs_getxattr(dentry, key, *buf, buflen); + if (ret < 0) + kfree(*buf); + return ret; } #endif diff --git a/include/asm-generic/mutex-dec.h b/include/asm-generic/mutex-dec.h index ed108be6743f..f104af7cf437 100644 --- a/include/asm-generic/mutex-dec.h +++ b/include/asm-generic/mutex-dec.h @@ -22,8 +22,6 @@ __mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) { if (unlikely(atomic_dec_return(count) < 0)) fail_fn(count); - else - smp_mb(); } /** @@ -41,10 +39,7 @@ __mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) { if (unlikely(atomic_dec_return(count) < 0)) return fail_fn(count); - else { - smp_mb(); - return 0; - } + return 0; } /** @@ -63,7 +58,6 @@ __mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) static inline void __mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *)) { - smp_mb(); if (unlikely(atomic_inc_return(count) <= 0)) fail_fn(count); } @@ -88,25 +82,9 @@ __mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *)) static inline int __mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *)) { - /* - * We have two variants here. The cmpxchg based one is the best one - * because it never induce a false contention state. It is included - * here because architectures using the inc/dec algorithms over the - * xchg ones are much more likely to support cmpxchg natively. - * - * If not we fall back to the spinlock based variant - that is - * just as efficient (and simpler) as a 'destructive' probing of - * the mutex state would be. - */ -#ifdef __HAVE_ARCH_CMPXCHG - if (likely(atomic_cmpxchg(count, 1, 0) == 1)) { - smp_mb(); + if (likely(atomic_cmpxchg(count, 1, 0) == 1)) return 1; - } return 0; -#else - return fail_fn(count); -#endif } #endif diff --git a/include/asm-generic/mutex-xchg.h b/include/asm-generic/mutex-xchg.h index 7b9cd2cbfebe..580a6d35c700 100644 --- a/include/asm-generic/mutex-xchg.h +++ b/include/asm-generic/mutex-xchg.h @@ -27,8 +27,6 @@ __mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *)) { if (unlikely(atomic_xchg(count, 0) != 1)) fail_fn(count); - else - smp_mb(); } /** @@ -46,10 +44,7 @@ __mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) { if (unlikely(atomic_xchg(count, 0) != 1)) return fail_fn(count); - else { - smp_mb(); - return 0; - } + return 0; } /** @@ -67,7 +62,6 @@ __mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *)) static inline void __mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *)) { - smp_mb(); if (unlikely(atomic_xchg(count, 1) != 0)) fail_fn(count); } @@ -110,7 +104,6 @@ __mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *)) if (prev < 0) prev = 0; } - smp_mb(); return prev; } diff --git a/include/asm-x86/iommu.h b/include/asm-x86/iommu.h index 961e746da977..2daaffcda52f 100644 --- a/include/asm-x86/iommu.h +++ b/include/asm-x86/iommu.h @@ -7,9 +7,13 @@ extern struct dma_mapping_ops nommu_dma_ops; extern int force_iommu, no_iommu; extern int iommu_detected; extern int dmar_disabled; +extern int forbid_dac; extern unsigned long iommu_nr_pages(unsigned long addr, unsigned long len); +/* 10 seconds */ +#define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000) + #ifdef CONFIG_GART_IOMMU extern int gart_iommu_aperture; extern int gart_iommu_aperture_allowed; diff --git a/include/asm-xtensa/io.h b/include/asm-xtensa/io.h index 47c3616ea9ac..07b7299dab20 100644 --- a/include/asm-xtensa/io.h +++ b/include/asm-xtensa/io.h @@ -18,10 +18,12 @@ #include <linux/types.h> -#define XCHAL_KIO_CACHED_VADDR 0xf0000000 -#define XCHAL_KIO_BYPASS_VADDR 0xf8000000 +#define XCHAL_KIO_CACHED_VADDR 0xe0000000 +#define XCHAL_KIO_BYPASS_VADDR 0xf0000000 #define XCHAL_KIO_PADDR 0xf0000000 -#define XCHAL_KIO_SIZE 0x08000000 +#define XCHAL_KIO_SIZE 0x10000000 + +#define IOADDR(x) (XCHAL_KIO_BYPASS_VADDR + (x)) /* * swap functions to change byte order from little-endian to big-endian and diff --git a/include/asm-xtensa/rwsem.h b/include/asm-xtensa/rwsem.h index 0aad3a587551..e39edf5c86f2 100644 --- a/include/asm-xtensa/rwsem.h +++ b/include/asm-xtensa/rwsem.h @@ -13,6 +13,10 @@ #ifndef _XTENSA_RWSEM_H #define _XTENSA_RWSEM_H +#ifndef _LINUX_RWSEM_H +#error "Please don't include <asm/rwsem.h> directly, use <linux/rwsem.h> instead." +#endif + #include <linux/list.h> #include <linux/spinlock.h> #include <asm/atomic.h> diff --git a/include/asm-xtensa/variant-dc232b/core.h b/include/asm-xtensa/variant-dc232b/core.h new file mode 100644 index 000000000000..525bd3d90154 --- /dev/null +++ b/include/asm-xtensa/variant-dc232b/core.h @@ -0,0 +1,424 @@ +/* + * Xtensa processor core configuration information. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (c) 1999-2007 Tensilica Inc. + */ + +#ifndef _XTENSA_CORE_CONFIGURATION_H +#define _XTENSA_CORE_CONFIGURATION_H + + +/**************************************************************************** + Parameters Useful for Any Code, USER or PRIVILEGED + ****************************************************************************/ + +/* + * Note: Macros of the form XCHAL_HAVE_*** have a value of 1 if the option is + * configured, and a value of 0 otherwise. These macros are always defined. + */ + + +/*---------------------------------------------------------------------- + ISA + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_BE 0 /* big-endian byte ordering */ +#define XCHAL_HAVE_WINDOWED 1 /* windowed registers option */ +#define XCHAL_NUM_AREGS 32 /* num of physical addr regs */ +#define XCHAL_NUM_AREGS_LOG2 5 /* log2(XCHAL_NUM_AREGS) */ +#define XCHAL_MAX_INSTRUCTION_SIZE 3 /* max instr bytes (3..8) */ +#define XCHAL_HAVE_DEBUG 1 /* debug option */ +#define XCHAL_HAVE_DENSITY 1 /* 16-bit instructions */ +#define XCHAL_HAVE_LOOPS 1 /* zero-overhead loops */ +#define XCHAL_HAVE_NSA 1 /* NSA/NSAU instructions */ +#define XCHAL_HAVE_MINMAX 1 /* MIN/MAX instructions */ +#define XCHAL_HAVE_SEXT 1 /* SEXT instruction */ +#define XCHAL_HAVE_CLAMPS 1 /* CLAMPS instruction */ +#define XCHAL_HAVE_MUL16 1 /* MUL16S/MUL16U instructions */ +#define XCHAL_HAVE_MUL32 1 /* MULL instruction */ +#define XCHAL_HAVE_MUL32_HIGH 0 /* MULUH/MULSH instructions */ +#define XCHAL_HAVE_DIV32 1 /* QUOS/QUOU/REMS/REMU instructions */ +#define XCHAL_HAVE_L32R 1 /* L32R instruction */ +#define XCHAL_HAVE_ABSOLUTE_LITERALS 1 /* non-PC-rel (extended) L32R */ +#define XCHAL_HAVE_CONST16 0 /* CONST16 instruction */ +#define XCHAL_HAVE_ADDX 1 /* ADDX#/SUBX# instructions */ +#define XCHAL_HAVE_WIDE_BRANCHES 0 /* B*.W18 or B*.W15 instr's */ +#define XCHAL_HAVE_PREDICTED_BRANCHES 0 /* B[EQ/EQZ/NE/NEZ]T instr's */ +#define XCHAL_HAVE_CALL4AND12 1 /* (obsolete option) */ +#define XCHAL_HAVE_ABS 1 /* ABS instruction */ +/*#define XCHAL_HAVE_POPC 0*/ /* POPC instruction */ +/*#define XCHAL_HAVE_CRC 0*/ /* CRC instruction */ +#define XCHAL_HAVE_RELEASE_SYNC 1 /* L32AI/S32RI instructions */ +#define XCHAL_HAVE_S32C1I 1 /* S32C1I instruction */ +#define XCHAL_HAVE_SPECULATION 0 /* speculation */ +#define XCHAL_HAVE_FULL_RESET 1 /* all regs/state reset */ +#define XCHAL_NUM_CONTEXTS 1 /* */ +#define XCHAL_NUM_MISC_REGS 2 /* num of scratch regs (0..4) */ +#define XCHAL_HAVE_TAP_MASTER 0 /* JTAG TAP control instr's */ +#define XCHAL_HAVE_PRID 1 /* processor ID register */ +#define XCHAL_HAVE_THREADPTR 1 /* THREADPTR register */ +#define XCHAL_HAVE_BOOLEANS 0 /* boolean registers */ +#define XCHAL_HAVE_CP 1 /* CPENABLE reg (coprocessor) */ +#define XCHAL_CP_MAXCFG 8 /* max allowed cp id plus one */ +#define XCHAL_HAVE_MAC16 1 /* MAC16 package */ +#define XCHAL_HAVE_VECTORFPU2005 0 /* vector floating-point pkg */ +#define XCHAL_HAVE_FP 0 /* floating point pkg */ +#define XCHAL_HAVE_VECTRA1 0 /* Vectra I pkg */ +#define XCHAL_HAVE_VECTRALX 0 /* Vectra LX pkg */ +#define XCHAL_HAVE_HIFI2 0 /* HiFi2 Audio Engine pkg */ + + +/*---------------------------------------------------------------------- + MISC + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_WRITEBUFFER_ENTRIES 8 /* size of write buffer */ +#define XCHAL_INST_FETCH_WIDTH 4 /* instr-fetch width in bytes */ +#define XCHAL_DATA_WIDTH 4 /* data width in bytes */ +/* In T1050, applies to selected core load and store instructions (see ISA): */ +#define XCHAL_UNALIGNED_LOAD_EXCEPTION 1 /* unaligned loads cause exc. */ +#define XCHAL_UNALIGNED_STORE_EXCEPTION 1 /* unaligned stores cause exc.*/ + +#define XCHAL_SW_VERSION 701001 /* sw version of this header */ + +#define XCHAL_CORE_ID "dc232b" /* alphanum core name + (CoreID) set in the Xtensa + Processor Generator */ + +#define XCHAL_CORE_DESCRIPTION "Diamond 232L Standard Core Rev.B (LE)" +#define XCHAL_BUILD_UNIQUE_ID 0x0000BEEF /* 22-bit sw build ID */ + +/* + * These definitions describe the hardware targeted by this software. + */ +#define XCHAL_HW_CONFIGID0 0xC56307FE /* ConfigID hi 32 bits*/ +#define XCHAL_HW_CONFIGID1 0x0D40BEEF /* ConfigID lo 32 bits*/ +#define XCHAL_HW_VERSION_NAME "LX2.1.1" /* full version name */ +#define XCHAL_HW_VERSION_MAJOR 2210 /* major ver# of targeted hw */ +#define XCHAL_HW_VERSION_MINOR 1 /* minor ver# of targeted hw */ +#define XCHAL_HW_VERSION 221001 /* major*100+minor */ +#define XCHAL_HW_REL_LX2 1 +#define XCHAL_HW_REL_LX2_1 1 +#define XCHAL_HW_REL_LX2_1_1 1 +#define XCHAL_HW_CONFIGID_RELIABLE 1 +/* If software targets a *range* of hardware versions, these are the bounds: */ +#define XCHAL_HW_MIN_VERSION_MAJOR 2210 /* major v of earliest tgt hw */ +#define XCHAL_HW_MIN_VERSION_MINOR 1 /* minor v of earliest tgt hw */ +#define XCHAL_HW_MIN_VERSION 221001 /* earliest targeted hw */ +#define XCHAL_HW_MAX_VERSION_MAJOR 2210 /* major v of latest tgt hw */ +#define XCHAL_HW_MAX_VERSION_MINOR 1 /* minor v of latest tgt hw */ +#define XCHAL_HW_MAX_VERSION 221001 /* latest targeted hw */ + + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_ICACHE_LINESIZE 32 /* I-cache line size in bytes */ +#define XCHAL_DCACHE_LINESIZE 32 /* D-cache line size in bytes */ +#define XCHAL_ICACHE_LINEWIDTH 5 /* log2(I line size in bytes) */ +#define XCHAL_DCACHE_LINEWIDTH 5 /* log2(D line size in bytes) */ + +#define XCHAL_ICACHE_SIZE 16384 /* I-cache size in bytes or 0 */ +#define XCHAL_DCACHE_SIZE 16384 /* D-cache size in bytes or 0 */ + +#define XCHAL_DCACHE_IS_WRITEBACK 1 /* writeback feature */ + + + + +/**************************************************************************** + Parameters Useful for PRIVILEGED (Supervisory or Non-Virtualized) Code + ****************************************************************************/ + + +#ifndef XTENSA_HAL_NON_PRIVILEGED_ONLY + +/*---------------------------------------------------------------------- + CACHE + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_PIF 1 /* any outbound PIF present */ + +/* If present, cache size in bytes == (ways * 2^(linewidth + setwidth)). */ + +/* Number of cache sets in log2(lines per way): */ +#define XCHAL_ICACHE_SETWIDTH 7 +#define XCHAL_DCACHE_SETWIDTH 7 + +/* Cache set associativity (number of ways): */ +#define XCHAL_ICACHE_WAYS 4 +#define XCHAL_DCACHE_WAYS 4 + +/* Cache features: */ +#define XCHAL_ICACHE_LINE_LOCKABLE 1 +#define XCHAL_DCACHE_LINE_LOCKABLE 1 +#define XCHAL_ICACHE_ECC_PARITY 0 +#define XCHAL_DCACHE_ECC_PARITY 0 + +/* Number of encoded cache attr bits (see <xtensa/hal.h> for decoded bits): */ +#define XCHAL_CA_BITS 4 + + +/*---------------------------------------------------------------------- + INTERNAL I/D RAM/ROMs and XLMI + ----------------------------------------------------------------------*/ + +#define XCHAL_NUM_INSTROM 0 /* number of core instr. ROMs */ +#define XCHAL_NUM_INSTRAM 0 /* number of core instr. RAMs */ +#define XCHAL_NUM_DATAROM 0 /* number of core data ROMs */ +#define XCHAL_NUM_DATARAM 0 /* number of core data RAMs */ +#define XCHAL_NUM_URAM 0 /* number of core unified RAMs*/ +#define XCHAL_NUM_XLMI 0 /* number of core XLMI ports */ + + +/*---------------------------------------------------------------------- + INTERRUPTS and TIMERS + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_INTERRUPTS 1 /* interrupt option */ +#define XCHAL_HAVE_HIGHPRI_INTERRUPTS 1 /* med/high-pri. interrupts */ +#define XCHAL_HAVE_NMI 1 /* non-maskable interrupt */ +#define XCHAL_HAVE_CCOUNT 1 /* CCOUNT reg. (timer option) */ +#define XCHAL_NUM_TIMERS 3 /* number of CCOMPAREn regs */ +#define XCHAL_NUM_INTERRUPTS 22 /* number of interrupts */ +#define XCHAL_NUM_INTERRUPTS_LOG2 5 /* ceil(log2(NUM_INTERRUPTS)) */ +#define XCHAL_NUM_EXTINTERRUPTS 17 /* num of external interrupts */ +#define XCHAL_NUM_INTLEVELS 6 /* number of interrupt levels + (not including level zero) */ +#define XCHAL_EXCM_LEVEL 3 /* level masked by PS.EXCM */ + /* (always 1 in XEA1; levels 2 .. EXCM_LEVEL are "medium priority") */ + +/* Masks of interrupts at each interrupt level: */ +#define XCHAL_INTLEVEL1_MASK 0x001F80FF +#define XCHAL_INTLEVEL2_MASK 0x00000100 +#define XCHAL_INTLEVEL3_MASK 0x00200E00 +#define XCHAL_INTLEVEL4_MASK 0x00001000 +#define XCHAL_INTLEVEL5_MASK 0x00002000 +#define XCHAL_INTLEVEL6_MASK 0x00000000 +#define XCHAL_INTLEVEL7_MASK 0x00004000 + +/* Masks of interrupts at each range 1..n of interrupt levels: */ +#define XCHAL_INTLEVEL1_ANDBELOW_MASK 0x001F80FF +#define XCHAL_INTLEVEL2_ANDBELOW_MASK 0x001F81FF +#define XCHAL_INTLEVEL3_ANDBELOW_MASK 0x003F8FFF +#define XCHAL_INTLEVEL4_ANDBELOW_MASK 0x003F9FFF +#define XCHAL_INTLEVEL5_ANDBELOW_MASK 0x003FBFFF +#define XCHAL_INTLEVEL6_ANDBELOW_MASK 0x003FBFFF +#define XCHAL_INTLEVEL7_ANDBELOW_MASK 0x003FFFFF + +/* Level of each interrupt: */ +#define XCHAL_INT0_LEVEL 1 +#define XCHAL_INT1_LEVEL 1 +#define XCHAL_INT2_LEVEL 1 +#define XCHAL_INT3_LEVEL 1 +#define XCHAL_INT4_LEVEL 1 +#define XCHAL_INT5_LEVEL 1 +#define XCHAL_INT6_LEVEL 1 +#define XCHAL_INT7_LEVEL 1 +#define XCHAL_INT8_LEVEL 2 +#define XCHAL_INT9_LEVEL 3 +#define XCHAL_INT10_LEVEL 3 +#define XCHAL_INT11_LEVEL 3 +#define XCHAL_INT12_LEVEL 4 +#define XCHAL_INT13_LEVEL 5 +#define XCHAL_INT14_LEVEL 7 +#define XCHAL_INT15_LEVEL 1 +#define XCHAL_INT16_LEVEL 1 +#define XCHAL_INT17_LEVEL 1 +#define XCHAL_INT18_LEVEL 1 +#define XCHAL_INT19_LEVEL 1 +#define XCHAL_INT20_LEVEL 1 +#define XCHAL_INT21_LEVEL 3 +#define XCHAL_DEBUGLEVEL 6 /* debug interrupt level */ +#define XCHAL_HAVE_DEBUG_EXTERN_INT 1 /* OCD external db interrupt */ +#define XCHAL_NMILEVEL 7 /* NMI "level" (for use with + EXCSAVE/EPS/EPC_n, RFI n) */ + +/* Type of each interrupt: */ +#define XCHAL_INT0_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT1_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT2_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT3_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT4_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT5_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT6_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT7_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT8_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT9_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT10_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT11_TYPE XTHAL_INTTYPE_SOFTWARE +#define XCHAL_INT12_TYPE XTHAL_INTTYPE_EXTERN_LEVEL +#define XCHAL_INT13_TYPE XTHAL_INTTYPE_TIMER +#define XCHAL_INT14_TYPE XTHAL_INTTYPE_NMI +#define XCHAL_INT15_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT16_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT17_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT18_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT19_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT20_TYPE XTHAL_INTTYPE_EXTERN_EDGE +#define XCHAL_INT21_TYPE XTHAL_INTTYPE_EXTERN_EDGE + +/* Masks of interrupts for each type of interrupt: */ +#define XCHAL_INTTYPE_MASK_UNCONFIGURED 0xFFC00000 +#define XCHAL_INTTYPE_MASK_SOFTWARE 0x00000880 +#define XCHAL_INTTYPE_MASK_EXTERN_EDGE 0x003F8000 +#define XCHAL_INTTYPE_MASK_EXTERN_LEVEL 0x0000133F +#define XCHAL_INTTYPE_MASK_TIMER 0x00002440 +#define XCHAL_INTTYPE_MASK_NMI 0x00004000 +#define XCHAL_INTTYPE_MASK_WRITE_ERROR 0x00000000 + +/* Interrupt numbers assigned to specific interrupt sources: */ +#define XCHAL_TIMER0_INTERRUPT 6 /* CCOMPARE0 */ +#define XCHAL_TIMER1_INTERRUPT 10 /* CCOMPARE1 */ +#define XCHAL_TIMER2_INTERRUPT 13 /* CCOMPARE2 */ +#define XCHAL_TIMER3_INTERRUPT XTHAL_TIMER_UNCONFIGURED +#define XCHAL_NMI_INTERRUPT 14 /* non-maskable interrupt */ + +/* Interrupt numbers for levels at which only one interrupt is configured: */ +#define XCHAL_INTLEVEL2_NUM 8 +#define XCHAL_INTLEVEL4_NUM 12 +#define XCHAL_INTLEVEL5_NUM 13 +#define XCHAL_INTLEVEL7_NUM 14 +/* (There are many interrupts each at level(s) 1, 3.) */ + + +/* + * External interrupt vectors/levels. + * These macros describe how Xtensa processor interrupt numbers + * (as numbered internally, eg. in INTERRUPT and INTENABLE registers) + * map to external BInterrupt<n> pins, for those interrupts + * configured as external (level-triggered, edge-triggered, or NMI). + * See the Xtensa processor databook for more details. + */ + +/* Core interrupt numbers mapped to each EXTERNAL interrupt number: */ +#define XCHAL_EXTINT0_NUM 0 /* (intlevel 1) */ +#define XCHAL_EXTINT1_NUM 1 /* (intlevel 1) */ +#define XCHAL_EXTINT2_NUM 2 /* (intlevel 1) */ +#define XCHAL_EXTINT3_NUM 3 /* (intlevel 1) */ +#define XCHAL_EXTINT4_NUM 4 /* (intlevel 1) */ +#define XCHAL_EXTINT5_NUM 5 /* (intlevel 1) */ +#define XCHAL_EXTINT6_NUM 8 /* (intlevel 2) */ +#define XCHAL_EXTINT7_NUM 9 /* (intlevel 3) */ +#define XCHAL_EXTINT8_NUM 12 /* (intlevel 4) */ +#define XCHAL_EXTINT9_NUM 14 /* (intlevel 7) */ +#define XCHAL_EXTINT10_NUM 15 /* (intlevel 1) */ +#define XCHAL_EXTINT11_NUM 16 /* (intlevel 1) */ +#define XCHAL_EXTINT12_NUM 17 /* (intlevel 1) */ +#define XCHAL_EXTINT13_NUM 18 /* (intlevel 1) */ +#define XCHAL_EXTINT14_NUM 19 /* (intlevel 1) */ +#define XCHAL_EXTINT15_NUM 20 /* (intlevel 1) */ +#define XCHAL_EXTINT16_NUM 21 /* (intlevel 3) */ + + +/*---------------------------------------------------------------------- + EXCEPTIONS and VECTORS + ----------------------------------------------------------------------*/ + +#define XCHAL_XEA_VERSION 2 /* Xtensa Exception Architecture + number: 1 == XEA1 (old) + 2 == XEA2 (new) + 0 == XEAX (extern) */ +#define XCHAL_HAVE_XEA1 0 /* Exception Architecture 1 */ +#define XCHAL_HAVE_XEA2 1 /* Exception Architecture 2 */ +#define XCHAL_HAVE_XEAX 0 /* External Exception Arch. */ +#define XCHAL_HAVE_EXCEPTIONS 1 /* exception option */ +#define XCHAL_HAVE_MEM_ECC_PARITY 0 /* local memory ECC/parity */ +#define XCHAL_HAVE_VECTOR_SELECT 1 /* relocatable vectors */ +#define XCHAL_HAVE_VECBASE 1 /* relocatable vectors */ +#define XCHAL_VECBASE_RESET_VADDR 0xD0000000 /* VECBASE reset value */ +#define XCHAL_VECBASE_RESET_PADDR 0x00000000 +#define XCHAL_RESET_VECBASE_OVERLAP 0 + +#define XCHAL_RESET_VECTOR0_VADDR 0xFE000000 +#define XCHAL_RESET_VECTOR0_PADDR 0xFE000000 +#define XCHAL_RESET_VECTOR1_VADDR 0xD8000500 +#define XCHAL_RESET_VECTOR1_PADDR 0x00000500 +#define XCHAL_RESET_VECTOR_VADDR 0xFE000000 +#define XCHAL_RESET_VECTOR_PADDR 0xFE000000 +#define XCHAL_USER_VECOFS 0x00000340 +#define XCHAL_USER_VECTOR_VADDR 0xD0000340 +#define XCHAL_USER_VECTOR_PADDR 0x00000340 +#define XCHAL_KERNEL_VECOFS 0x00000300 +#define XCHAL_KERNEL_VECTOR_VADDR 0xD0000300 +#define XCHAL_KERNEL_VECTOR_PADDR 0x00000300 +#define XCHAL_DOUBLEEXC_VECOFS 0x000003C0 +#define XCHAL_DOUBLEEXC_VECTOR_VADDR 0xD00003C0 +#define XCHAL_DOUBLEEXC_VECTOR_PADDR 0x000003C0 +#define XCHAL_WINDOW_OF4_VECOFS 0x00000000 +#define XCHAL_WINDOW_UF4_VECOFS 0x00000040 +#define XCHAL_WINDOW_OF8_VECOFS 0x00000080 +#define XCHAL_WINDOW_UF8_VECOFS 0x000000C0 +#define XCHAL_WINDOW_OF12_VECOFS 0x00000100 +#define XCHAL_WINDOW_UF12_VECOFS 0x00000140 +#define XCHAL_WINDOW_VECTORS_VADDR 0xD0000000 +#define XCHAL_WINDOW_VECTORS_PADDR 0x00000000 +#define XCHAL_INTLEVEL2_VECOFS 0x00000180 +#define XCHAL_INTLEVEL2_VECTOR_VADDR 0xD0000180 +#define XCHAL_INTLEVEL2_VECTOR_PADDR 0x00000180 +#define XCHAL_INTLEVEL3_VECOFS 0x000001C0 +#define XCHAL_INTLEVEL3_VECTOR_VADDR 0xD00001C0 +#define XCHAL_INTLEVEL3_VECTOR_PADDR 0x000001C0 +#define XCHAL_INTLEVEL4_VECOFS 0x00000200 +#define XCHAL_INTLEVEL4_VECTOR_VADDR 0xD0000200 +#define XCHAL_INTLEVEL4_VECTOR_PADDR 0x00000200 +#define XCHAL_INTLEVEL5_VECOFS 0x00000240 +#define XCHAL_INTLEVEL5_VECTOR_VADDR 0xD0000240 +#define XCHAL_INTLEVEL5_VECTOR_PADDR 0x00000240 +#define XCHAL_INTLEVEL6_VECOFS 0x00000280 +#define XCHAL_INTLEVEL6_VECTOR_VADDR 0xD0000280 +#define XCHAL_INTLEVEL6_VECTOR_PADDR 0x00000280 +#define XCHAL_DEBUG_VECOFS XCHAL_INTLEVEL6_VECOFS +#define XCHAL_DEBUG_VECTOR_VADDR XCHAL_INTLEVEL6_VECTOR_VADDR +#define XCHAL_DEBUG_VECTOR_PADDR XCHAL_INTLEVEL6_VECTOR_PADDR +#define XCHAL_NMI_VECOFS 0x000002C0 +#define XCHAL_NMI_VECTOR_VADDR 0xD00002C0 +#define XCHAL_NMI_VECTOR_PADDR 0x000002C0 +#define XCHAL_INTLEVEL7_VECOFS XCHAL_NMI_VECOFS +#define XCHAL_INTLEVEL7_VECTOR_VADDR XCHAL_NMI_VECTOR_VADDR +#define XCHAL_INTLEVEL7_VECTOR_PADDR XCHAL_NMI_VECTOR_PADDR + + +/*---------------------------------------------------------------------- + DEBUG + ----------------------------------------------------------------------*/ + +#define XCHAL_HAVE_OCD 1 /* OnChipDebug option */ +#define XCHAL_NUM_IBREAK 2 /* number of IBREAKn regs */ +#define XCHAL_NUM_DBREAK 2 /* number of DBREAKn regs */ +#define XCHAL_HAVE_OCD_DIR_ARRAY 1 /* faster OCD option */ + + +/*---------------------------------------------------------------------- + MMU + ----------------------------------------------------------------------*/ + +/* See core-matmap.h header file for more details. */ + +#define XCHAL_HAVE_TLBS 1 /* inverse of HAVE_CACHEATTR */ +#define XCHAL_HAVE_SPANNING_WAY 0 /* one way maps I+D 4GB vaddr */ +#define XCHAL_HAVE_IDENTITY_MAP 0 /* vaddr == paddr always */ +#define XCHAL_HAVE_CACHEATTR 0 /* CACHEATTR register present */ +#define XCHAL_HAVE_MIMIC_CACHEATTR 0 /* region protection */ +#define XCHAL_HAVE_XLT_CACHEATTR 0 /* region prot. w/translation */ +#define XCHAL_HAVE_PTP_MMU 1 /* full MMU (with page table + [autorefill] and protection) + usable for an MMU-based OS */ +/* If none of the above last 4 are set, it's a custom TLB configuration. */ +#define XCHAL_ITLB_ARF_ENTRIES_LOG2 2 /* log2(autorefill way size) */ +#define XCHAL_DTLB_ARF_ENTRIES_LOG2 2 /* log2(autorefill way size) */ + +#define XCHAL_MMU_ASID_BITS 8 /* number of bits in ASIDs */ +#define XCHAL_MMU_RINGS 4 /* number of rings (1..4) */ +#define XCHAL_MMU_RING_BITS 2 /* num of bits in RING field */ + +#endif /* !XTENSA_HAL_NON_PRIVILEGED_ONLY */ + + +#endif /* _XTENSA_CORE_CONFIGURATION_H */ + diff --git a/include/asm-xtensa/variant-dc232b/tie-asm.h b/include/asm-xtensa/variant-dc232b/tie-asm.h new file mode 100644 index 000000000000..ed4f53f529db --- /dev/null +++ b/include/asm-xtensa/variant-dc232b/tie-asm.h @@ -0,0 +1,122 @@ +/* + * This header file contains assembly-language definitions (assembly + * macros, etc.) for this specific Xtensa processor's TIE extensions + * and options. It is customized to this Xtensa processor configuration. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999-2007 Tensilica Inc. + */ + +#ifndef _XTENSA_CORE_TIE_ASM_H +#define _XTENSA_CORE_TIE_ASM_H + +/* Selection parameter values for save-area save/restore macros: */ +/* Option vs. TIE: */ +#define XTHAL_SAS_TIE 0x0001 /* custom extension or coprocessor */ +#define XTHAL_SAS_OPT 0x0002 /* optional (and not a coprocessor) */ +/* Whether used automatically by compiler: */ +#define XTHAL_SAS_NOCC 0x0004 /* not used by compiler w/o special opts/code */ +#define XTHAL_SAS_CC 0x0008 /* used by compiler without special opts/code */ +/* ABI handling across function calls: */ +#define XTHAL_SAS_CALR 0x0010 /* caller-saved */ +#define XTHAL_SAS_CALE 0x0020 /* callee-saved */ +#define XTHAL_SAS_GLOB 0x0040 /* global across function calls (in thread) */ +/* Misc */ +#define XTHAL_SAS_ALL 0xFFFF /* include all default NCP contents */ + + + +/* Macro to save all non-coprocessor (extra) custom TIE and optional state + * (not including zero-overhead loop registers). + * Save area ptr (clobbered): ptr (1 byte aligned) + * Scratch regs (clobbered): at1..at4 (only first XCHAL_NCP_NUM_ATMPS needed) + */ + .macro xchal_ncp_store ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL + xchal_sa_start \continue, \ofs + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~\select + xchal_sa_align \ptr, 0, 1024-8, 4, 4 + rsr \at1, ACCLO // MAC16 accumulator + rsr \at2, ACCHI + s32i \at1, \ptr, .Lxchal_ofs_ + 0 + s32i \at2, \ptr, .Lxchal_ofs_ + 4 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .endif + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select + xchal_sa_align \ptr, 0, 1024-16, 4, 4 + rsr \at1, M0 // MAC16 registers + rsr \at2, M1 + s32i \at1, \ptr, .Lxchal_ofs_ + 0 + s32i \at2, \ptr, .Lxchal_ofs_ + 4 + rsr \at1, M2 + rsr \at2, M3 + s32i \at1, \ptr, .Lxchal_ofs_ + 8 + s32i \at2, \ptr, .Lxchal_ofs_ + 12 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 16 + .endif + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select + xchal_sa_align \ptr, 0, 1024-4, 4, 4 + rsr \at1, SCOMPARE1 // conditional store option + s32i \at1, \ptr, .Lxchal_ofs_ + 0 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .endif + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~\select + xchal_sa_align \ptr, 0, 1024-4, 4, 4 + rur \at1, THREADPTR // threadptr option + s32i \at1, \ptr, .Lxchal_ofs_ + 0 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .endif + .endm // xchal_ncp_store + +/* Macro to save all non-coprocessor (extra) custom TIE and optional state + * (not including zero-overhead loop registers). + * Save area ptr (clobbered): ptr (1 byte aligned) + * Scratch regs (clobbered): at1..at4 (only first XCHAL_NCP_NUM_ATMPS needed) + */ + .macro xchal_ncp_load ptr at1 at2 at3 at4 continue=0 ofs=-1 select=XTHAL_SAS_ALL + xchal_sa_start \continue, \ofs + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_CALR) & ~\select + xchal_sa_align \ptr, 0, 1024-8, 4, 4 + l32i \at1, \ptr, .Lxchal_ofs_ + 0 + l32i \at2, \ptr, .Lxchal_ofs_ + 4 + wsr \at1, ACCLO // MAC16 accumulator + wsr \at2, ACCHI + .set .Lxchal_ofs_, .Lxchal_ofs_ + 8 + .endif + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select + xchal_sa_align \ptr, 0, 1024-16, 4, 4 + l32i \at1, \ptr, .Lxchal_ofs_ + 0 + l32i \at2, \ptr, .Lxchal_ofs_ + 4 + wsr \at1, M0 // MAC16 registers + wsr \at2, M1 + l32i \at1, \ptr, .Lxchal_ofs_ + 8 + l32i \at2, \ptr, .Lxchal_ofs_ + 12 + wsr \at1, M2 + wsr \at2, M3 + .set .Lxchal_ofs_, .Lxchal_ofs_ + 16 + .endif + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_NOCC | XTHAL_SAS_CALR) & ~\select + xchal_sa_align \ptr, 0, 1024-4, 4, 4 + l32i \at1, \ptr, .Lxchal_ofs_ + 0 + wsr \at1, SCOMPARE1 // conditional store option + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .endif + .ifeq (XTHAL_SAS_OPT | XTHAL_SAS_CC | XTHAL_SAS_GLOB) & ~\select + xchal_sa_align \ptr, 0, 1024-4, 4, 4 + l32i \at1, \ptr, .Lxchal_ofs_ + 0 + wur \at1, THREADPTR // threadptr option + .set .Lxchal_ofs_, .Lxchal_ofs_ + 4 + .endif + .endm // xchal_ncp_load + + + +#define XCHAL_NCP_NUM_ATMPS 2 + + +#define XCHAL_SA_NUM_ATMPS 2 + +#endif /*_XTENSA_CORE_TIE_ASM_H*/ + diff --git a/include/asm-xtensa/variant-dc232b/tie.h b/include/asm-xtensa/variant-dc232b/tie.h new file mode 100644 index 000000000000..018e81af4393 --- /dev/null +++ b/include/asm-xtensa/variant-dc232b/tie.h @@ -0,0 +1,131 @@ +/* + * This header file describes this specific Xtensa processor's TIE extensions + * that extend basic Xtensa core functionality. It is customized to this + * Xtensa processor configuration. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1999-2007 Tensilica Inc. + */ + +#ifndef _XTENSA_CORE_TIE_H +#define _XTENSA_CORE_TIE_H + +#define XCHAL_CP_NUM 1 /* number of coprocessors */ +#define XCHAL_CP_MAX 8 /* max CP ID + 1 (0 if none) */ +#define XCHAL_CP_MASK 0x80 /* bitmask of all CPs by ID */ +#define XCHAL_CP_PORT_MASK 0x80 /* bitmask of only port CPs */ + +/* Basic parameters of each coprocessor: */ +#define XCHAL_CP7_NAME "XTIOP" +#define XCHAL_CP7_IDENT XTIOP +#define XCHAL_CP7_SA_SIZE 0 /* size of state save area */ +#define XCHAL_CP7_SA_ALIGN 1 /* min alignment of save area */ +#define XCHAL_CP_ID_XTIOP 7 /* coprocessor ID (0..7) */ + +/* Filler info for unassigned coprocessors, to simplify arrays etc: */ +#define XCHAL_CP0_SA_SIZE 0 +#define XCHAL_CP0_SA_ALIGN 1 +#define XCHAL_CP1_SA_SIZE 0 +#define XCHAL_CP1_SA_ALIGN 1 +#define XCHAL_CP2_SA_SIZE 0 +#define XCHAL_CP2_SA_ALIGN 1 +#define XCHAL_CP3_SA_SIZE 0 +#define XCHAL_CP3_SA_ALIGN 1 +#define XCHAL_CP4_SA_SIZE 0 +#define XCHAL_CP4_SA_ALIGN 1 +#define XCHAL_CP5_SA_SIZE 0 +#define XCHAL_CP5_SA_ALIGN 1 +#define XCHAL_CP6_SA_SIZE 0 +#define XCHAL_CP6_SA_ALIGN 1 + +/* Save area for non-coprocessor optional and custom (TIE) state: */ +#define XCHAL_NCP_SA_SIZE 32 +#define XCHAL_NCP_SA_ALIGN 4 + +/* Total save area for optional and custom state (NCP + CPn): */ +#define XCHAL_TOTAL_SA_SIZE 32 /* with 16-byte align padding */ +#define XCHAL_TOTAL_SA_ALIGN 4 /* actual minimum alignment */ + +/* + * Detailed contents of save areas. + * NOTE: caller must define the XCHAL_SA_REG macro (not defined here) + * before expanding the XCHAL_xxx_SA_LIST() macros. + * + * XCHAL_SA_REG(s,ccused,abikind,kind,opt,name,galign,align,asize, + * dbnum,base,regnum,bitsz,gapsz,reset,x...) + * + * s = passed from XCHAL_*_LIST(s), eg. to select how to expand + * ccused = set if used by compiler without special options or code + * abikind = 0 (caller-saved), 1 (callee-saved), or 2 (thread-global) + * kind = 0 (special reg), 1 (TIE user reg), or 2 (TIE regfile reg) + * opt = 0 (custom TIE extension or coprocessor), or 1 (optional reg) + * name = lowercase reg name (no quotes) + * galign = group byte alignment (power of 2) (galign >= align) + * align = register byte alignment (power of 2) + * asize = allocated size in bytes (asize*8 == bitsz + gapsz + padsz) + * (not including any pad bytes required to galign this or next reg) + * dbnum = unique target number f/debug (see <xtensa-libdb-macros.h>) + * base = reg shortname w/o index (or sr=special, ur=TIE user reg) + * regnum = reg index in regfile, or special/TIE-user reg number + * bitsz = number of significant bits (regfile width, or ur/sr mask bits) + * gapsz = intervening bits, if bitsz bits not stored contiguously + * (padsz = pad bits at end [TIE regfile] or at msbits [ur,sr] of asize) + * reset = register reset value (or 0 if undefined at reset) + * x = reserved for future use (0 until then) + * + * To filter out certain registers, e.g. to expand only the non-global + * registers used by the compiler, you can do something like this: + * + * #define XCHAL_SA_REG(s,ccused,p...) SELCC##ccused(p) + * #define SELCC0(p...) + * #define SELCC1(abikind,p...) SELAK##abikind(p) + * #define SELAK0(p...) REG(p) + * #define SELAK1(p...) REG(p) + * #define SELAK2(p...) + * #define REG(kind,tie,name,galn,aln,asz,csz,dbnum,base,rnum,bsz,rst,x...) \ + * ...what you want to expand... + */ + +#define XCHAL_NCP_SA_NUM 8 +#define XCHAL_NCP_SA_LIST(s) \ + XCHAL_SA_REG(s,1,0,0,1, acclo, 4, 4, 4,0x0210, sr,16 , 32,0,0,0) \ + XCHAL_SA_REG(s,1,0,0,1, acchi, 4, 4, 4,0x0211, sr,17 , 8,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m0, 4, 4, 4,0x0220, sr,32 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m1, 4, 4, 4,0x0221, sr,33 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m2, 4, 4, 4,0x0222, sr,34 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, m3, 4, 4, 4,0x0223, sr,35 , 32,0,0,0) \ + XCHAL_SA_REG(s,0,0,0,1, scompare1, 4, 4, 4,0x020C, sr,12 , 32,0,0,0) \ + XCHAL_SA_REG(s,1,2,1,1, threadptr, 4, 4, 4,0x03E7, ur,231, 32,0,0,0) + +#define XCHAL_CP0_SA_NUM 0 +#define XCHAL_CP0_SA_LIST(s) /* empty */ + +#define XCHAL_CP1_SA_NUM 0 +#define XCHAL_CP1_SA_LIST(s) /* empty */ + +#define XCHAL_CP2_SA_NUM 0 +#define XCHAL_CP2_SA_LIST(s) /* empty */ + +#define XCHAL_CP3_SA_NUM 0 +#define XCHAL_CP3_SA_LIST(s) /* empty */ + +#define XCHAL_CP4_SA_NUM 0 +#define XCHAL_CP4_SA_LIST(s) /* empty */ + +#define XCHAL_CP5_SA_NUM 0 +#define XCHAL_CP5_SA_LIST(s) /* empty */ + +#define XCHAL_CP6_SA_NUM 0 +#define XCHAL_CP6_SA_LIST(s) /* empty */ + +#define XCHAL_CP7_SA_NUM 0 +#define XCHAL_CP7_SA_LIST(s) /* empty */ + +/* Byte length of instruction from its first nibble (op0 field), per FLIX. */ +#define XCHAL_OP0_FORMAT_LENGTHS 3,3,3,3,3,3,3,3,2,2,2,2,2,2,3,3 + +#endif /*_XTENSA_CORE_TIE_H*/ + diff --git a/include/linux/bitmap.h b/include/linux/bitmap.h index 1abfe664c444..a08c33a26ca9 100644 --- a/include/linux/bitmap.h +++ b/include/linux/bitmap.h @@ -129,6 +129,7 @@ extern void bitmap_fold(unsigned long *dst, const unsigned long *orig, extern int bitmap_find_free_region(unsigned long *bitmap, int bits, int order); extern void bitmap_release_region(unsigned long *bitmap, int pos, int order); extern int bitmap_allocate_region(unsigned long *bitmap, int pos, int order); +extern void bitmap_copy_le(void *dst, const unsigned long *src, int nbits); #define BITMAP_LAST_WORD_MASK(nbits) \ ( \ diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index 08d783592b73..dfb30db475ed 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -354,6 +354,9 @@ void *dm_vcalloc(unsigned long nmemb, unsigned long elem_size); */ #define dm_round_up(n, sz) (dm_div_up((n), (sz)) * (sz)) +#define dm_array_too_big(fixed, obj, num) \ + ((num) > (UINT_MAX - (fixed)) / (obj)) + static inline sector_t to_sector(unsigned long n) { return (n >> SECTOR_SHIFT); diff --git a/include/linux/device.h b/include/linux/device.h index 987f5912720a..1a3686d15f98 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -450,7 +450,7 @@ static inline void set_dev_node(struct device *dev, int node) } #endif -static inline void *dev_get_drvdata(struct device *dev) +static inline void *dev_get_drvdata(const struct device *dev) { return dev->driver_data; } diff --git a/include/linux/dm-region-hash.h b/include/linux/dm-region-hash.h new file mode 100644 index 000000000000..a9e652a41373 --- /dev/null +++ b/include/linux/dm-region-hash.h @@ -0,0 +1,104 @@ +/* + * Copyright (C) 2003 Sistina Software Limited. + * Copyright (C) 2004-2008 Red Hat, Inc. All rights reserved. + * + * Device-Mapper dirty region hash interface. + * + * This file is released under the GPL. + */ + +#ifndef DM_REGION_HASH_H +#define DM_REGION_HASH_H + +#include <linux/dm-dirty-log.h> + +/*----------------------------------------------------------------- + * Region hash + *----------------------------------------------------------------*/ +struct dm_region_hash; +struct dm_region; + +/* + * States a region can have. + */ +enum dm_rh_region_states { + DM_RH_CLEAN = 0x01, /* No writes in flight. */ + DM_RH_DIRTY = 0x02, /* Writes in flight. */ + DM_RH_NOSYNC = 0x04, /* Out of sync. */ + DM_RH_RECOVERING = 0x08, /* Under resynchronization. */ +}; + +/* + * Region hash create/destroy. + */ +struct bio_list; +struct dm_region_hash *dm_region_hash_create( + void *context, void (*dispatch_bios)(void *context, + struct bio_list *bios), + void (*wakeup_workers)(void *context), + void (*wakeup_all_recovery_waiters)(void *context), + sector_t target_begin, unsigned max_recovery, + struct dm_dirty_log *log, uint32_t region_size, + region_t nr_regions); +void dm_region_hash_destroy(struct dm_region_hash *rh); + +struct dm_dirty_log *dm_rh_dirty_log(struct dm_region_hash *rh); + +/* + * Conversion functions. + */ +region_t dm_rh_bio_to_region(struct dm_region_hash *rh, struct bio *bio); +sector_t dm_rh_region_to_sector(struct dm_region_hash *rh, region_t region); +void *dm_rh_region_context(struct dm_region *reg); + +/* + * Get region size and key (ie. number of the region). + */ +sector_t dm_rh_get_region_size(struct dm_region_hash *rh); +region_t dm_rh_get_region_key(struct dm_region *reg); + +/* + * Get/set/update region state (and dirty log). + * + */ +int dm_rh_get_state(struct dm_region_hash *rh, region_t region, int may_block); +void dm_rh_set_state(struct dm_region_hash *rh, region_t region, + enum dm_rh_region_states state, int may_block); + +/* Non-zero errors_handled leaves the state of the region NOSYNC */ +void dm_rh_update_states(struct dm_region_hash *rh, int errors_handled); + +/* Flush the region hash and dirty log. */ +int dm_rh_flush(struct dm_region_hash *rh); + +/* Inc/dec pending count on regions. */ +void dm_rh_inc_pending(struct dm_region_hash *rh, struct bio_list *bios); +void dm_rh_dec(struct dm_region_hash *rh, region_t region); + +/* Delay bios on regions. */ +void dm_rh_delay(struct dm_region_hash *rh, struct bio *bio); + +void dm_rh_mark_nosync(struct dm_region_hash *rh, + struct bio *bio, unsigned done, int error); + +/* + * Region recovery control. + */ + +/* Prepare some regions for recovery by starting to quiesce them. */ +void dm_rh_recovery_prepare(struct dm_region_hash *rh); + +/* Try fetching a quiesced region for recovery. */ +struct dm_region *dm_rh_recovery_start(struct dm_region_hash *rh); + +/* Report recovery end on a region. */ +void dm_rh_recovery_end(struct dm_region *reg, int error); + +/* Returns number of regions with recovery work outstanding. */ +int dm_rh_recovery_in_flight(struct dm_region_hash *rh); + +/* Start/stop recovery. */ +void dm_rh_start_recovery(struct dm_region_hash *rh); +void dm_rh_stop_recovery(struct dm_region_hash *rh); + +#endif /* DM_REGION_HASH_H */ diff --git a/include/linux/dma_remapping.h b/include/linux/dma_remapping.h index bff5c65f81dc..952df39c989d 100644 --- a/include/linux/dma_remapping.h +++ b/include/linux/dma_remapping.h @@ -2,15 +2,14 @@ #define _DMA_REMAPPING_H /* - * We need a fixed PAGE_SIZE of 4K irrespective of - * arch PAGE_SIZE for IOMMU page tables. + * VT-d hardware uses 4KiB page size regardless of host page size. */ -#define PAGE_SHIFT_4K (12) -#define PAGE_SIZE_4K (1UL << PAGE_SHIFT_4K) -#define PAGE_MASK_4K (((u64)-1) << PAGE_SHIFT_4K) -#define PAGE_ALIGN_4K(addr) (((addr) + PAGE_SIZE_4K - 1) & PAGE_MASK_4K) +#define VTD_PAGE_SHIFT (12) +#define VTD_PAGE_SIZE (1UL << VTD_PAGE_SHIFT) +#define VTD_PAGE_MASK (((u64)-1) << VTD_PAGE_SHIFT) +#define VTD_PAGE_ALIGN(addr) (((addr) + VTD_PAGE_SIZE - 1) & VTD_PAGE_MASK) -#define IOVA_PFN(addr) ((addr) >> PAGE_SHIFT_4K) +#define IOVA_PFN(addr) ((addr) >> PAGE_SHIFT) #define DMA_32BIT_PFN IOVA_PFN(DMA_32BIT_MASK) #define DMA_64BIT_PFN IOVA_PFN(DMA_64BIT_MASK) @@ -25,7 +24,7 @@ struct root_entry { u64 val; u64 rsvd1; }; -#define ROOT_ENTRY_NR (PAGE_SIZE_4K/sizeof(struct root_entry)) +#define ROOT_ENTRY_NR (VTD_PAGE_SIZE/sizeof(struct root_entry)) static inline bool root_present(struct root_entry *root) { return (root->val & 1); @@ -36,7 +35,7 @@ static inline void set_root_present(struct root_entry *root) } static inline void set_root_value(struct root_entry *root, unsigned long value) { - root->val |= value & PAGE_MASK_4K; + root->val |= value & VTD_PAGE_MASK; } struct context_entry; @@ -45,7 +44,7 @@ get_context_addr_from_root(struct root_entry *root) { return (struct context_entry *) (root_present(root)?phys_to_virt( - root->val & PAGE_MASK_4K): + root->val & VTD_PAGE_MASK) : NULL); } @@ -67,7 +66,7 @@ struct context_entry { #define context_present(c) ((c).lo & 1) #define context_fault_disable(c) (((c).lo >> 1) & 1) #define context_translation_type(c) (((c).lo >> 2) & 3) -#define context_address_root(c) ((c).lo & PAGE_MASK_4K) +#define context_address_root(c) ((c).lo & VTD_PAGE_MASK) #define context_address_width(c) ((c).hi & 7) #define context_domain_id(c) (((c).hi >> 8) & ((1 << 16) - 1)) @@ -81,7 +80,7 @@ struct context_entry { } while (0) #define CONTEXT_TT_MULTI_LEVEL 0 #define context_set_address_root(c, val) \ - do {(c).lo |= (val) & PAGE_MASK_4K;} while (0) + do {(c).lo |= (val) & VTD_PAGE_MASK; } while (0) #define context_set_address_width(c, val) do {(c).hi |= (val) & 7;} while (0) #define context_set_domain_id(c, val) \ do {(c).hi |= ((val) & ((1 << 16) - 1)) << 8;} while (0) @@ -107,9 +106,9 @@ struct dma_pte { #define dma_set_pte_writable(p) do {(p).val |= DMA_PTE_WRITE;} while (0) #define dma_set_pte_prot(p, prot) \ do {(p).val = ((p).val & ~3) | ((prot) & 3); } while (0) -#define dma_pte_addr(p) ((p).val & PAGE_MASK_4K) +#define dma_pte_addr(p) ((p).val & VTD_PAGE_MASK) #define dma_set_pte_addr(p, addr) do {\ - (p).val |= ((addr) & PAGE_MASK_4K); } while (0) + (p).val |= ((addr) & VTD_PAGE_MASK); } while (0) #define dma_pte_present(p) (((p).val & 3) != 0) struct intel_iommu; diff --git a/include/linux/i2c-algo-pcf.h b/include/linux/i2c-algo-pcf.h index 0177d280f733..0f91a957a690 100644 --- a/include/linux/i2c-algo-pcf.h +++ b/include/linux/i2c-algo-pcf.h @@ -31,7 +31,10 @@ struct i2c_algo_pcf_data { int (*getpcf) (void *data, int ctl); int (*getown) (void *data); int (*getclock) (void *data); - void (*waitforpin) (void); + void (*waitforpin) (void *data); + + void (*xfer_begin) (void *data); + void (*xfer_end) (void *data); /* Multi-master lost arbitration back-off delay (msecs) * This should be set by the bus adapter or knowledgable client diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 06115128047f..33a5992d4936 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -53,45 +53,44 @@ struct i2c_board_info; * transmit one message at a time, a more complex version can be used to * transmit an arbitrary number of messages without interruption. */ -extern int i2c_master_send(struct i2c_client *,const char* ,int); -extern int i2c_master_recv(struct i2c_client *,char* ,int); +extern int i2c_master_send(struct i2c_client *client, const char *buf, + int count); +extern int i2c_master_recv(struct i2c_client *client, char *buf, int count); /* Transfer num messages. */ -extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num); - +extern int i2c_transfer(struct i2c_adapter *adap, struct i2c_msg *msgs, + int num); /* This is the very generalized SMBus access routine. You probably do not want to use this, though; one of the functions below may be much easier, and probably just as fast. Note that we use i2c_adapter here, because you do not need a specific smbus adapter to call this function. */ -extern s32 i2c_smbus_xfer (struct i2c_adapter * adapter, u16 addr, - unsigned short flags, - char read_write, u8 command, int size, - union i2c_smbus_data * data); +extern s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, + unsigned short flags, char read_write, u8 command, + int size, union i2c_smbus_data *data); /* Now follow the 'nice' access routines. These also document the calling conventions of i2c_smbus_xfer. */ -extern s32 i2c_smbus_read_byte(struct i2c_client * client); -extern s32 i2c_smbus_write_byte(struct i2c_client * client, u8 value); -extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command); -extern s32 i2c_smbus_write_byte_data(struct i2c_client * client, - u8 command, u8 value); -extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command); -extern s32 i2c_smbus_write_word_data(struct i2c_client * client, - u8 command, u16 value); +extern s32 i2c_smbus_read_byte(struct i2c_client *client); +extern s32 i2c_smbus_write_byte(struct i2c_client *client, u8 value); +extern s32 i2c_smbus_read_byte_data(struct i2c_client *client, u8 command); +extern s32 i2c_smbus_write_byte_data(struct i2c_client *client, + u8 command, u8 value); +extern s32 i2c_smbus_read_word_data(struct i2c_client *client, u8 command); +extern s32 i2c_smbus_write_word_data(struct i2c_client *client, + u8 command, u16 value); /* Returns the number of read bytes */ extern s32 i2c_smbus_read_block_data(struct i2c_client *client, u8 command, u8 *values); -extern s32 i2c_smbus_write_block_data(struct i2c_client * client, - u8 command, u8 length, - const u8 *values); +extern s32 i2c_smbus_write_block_data(struct i2c_client *client, + u8 command, u8 length, const u8 *values); /* Returns the number of read bytes */ -extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client * client, +extern s32 i2c_smbus_read_i2c_block_data(struct i2c_client *client, u8 command, u8 length, u8 *values); -extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client, +extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client *client, u8 command, u8 length, const u8 *values); @@ -169,7 +168,7 @@ struct i2c_driver { /* a ioctl like command that can be used to perform specific functions * with the device. */ - int (*command)(struct i2c_client *client,unsigned int cmd, void *arg); + int (*command)(struct i2c_client *client, unsigned int cmd, void *arg); struct device_driver driver; const struct i2c_device_id *id_table; @@ -224,14 +223,14 @@ static inline struct i2c_client *kobj_to_i2c_client(struct kobject *kobj) return to_i2c_client(dev); } -static inline void *i2c_get_clientdata (struct i2c_client *dev) +static inline void *i2c_get_clientdata(const struct i2c_client *dev) { - return dev_get_drvdata (&dev->dev); + return dev_get_drvdata(&dev->dev); } -static inline void i2c_set_clientdata (struct i2c_client *dev, void *data) +static inline void i2c_set_clientdata(struct i2c_client *dev, void *data) { - dev_set_drvdata (&dev->dev, data); + dev_set_drvdata(&dev->dev, data); } /** @@ -240,6 +239,7 @@ static inline void i2c_set_clientdata (struct i2c_client *dev, void *data) * @flags: to initialize i2c_client.flags * @addr: stored in i2c_client.addr * @platform_data: stored in i2c_client.dev.platform_data + * @archdata: copied into i2c_client.dev.archdata * @irq: stored in i2c_client.irq * * I2C doesn't actually support hardware probing, although controllers and @@ -259,6 +259,7 @@ struct i2c_board_info { unsigned short flags; unsigned short addr; void *platform_data; + struct dev_archdata *archdata; int irq; }; @@ -272,7 +273,7 @@ struct i2c_board_info { * fields (such as associated irq, or device-specific platform_data) * are provided using conventional syntax. */ -#define I2C_BOARD_INFO(dev_type,dev_addr) \ +#define I2C_BOARD_INFO(dev_type, dev_addr) \ .type = (dev_type), .addr = (dev_addr) @@ -306,10 +307,12 @@ extern void i2c_unregister_device(struct i2c_client *); */ #ifdef CONFIG_I2C_BOARDINFO extern int -i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsigned n); +i2c_register_board_info(int busnum, struct i2c_board_info const *info, + unsigned n); #else static inline int -i2c_register_board_info(int busnum, struct i2c_board_info const *info, unsigned n) +i2c_register_board_info(int busnum, struct i2c_board_info const *info, + unsigned n) { return 0; } @@ -328,11 +331,11 @@ struct i2c_algorithm { using common I2C messages */ /* master_xfer should return the number of messages successfully processed, or a negative value on error */ - int (*master_xfer)(struct i2c_adapter *adap,struct i2c_msg *msgs, - int num); + int (*master_xfer)(struct i2c_adapter *adap, struct i2c_msg *msgs, + int num); int (*smbus_xfer) (struct i2c_adapter *adap, u16 addr, - unsigned short flags, char read_write, - u8 command, int size, union i2c_smbus_data * data); + unsigned short flags, char read_write, + u8 command, int size, union i2c_smbus_data *data); /* To determine what the adapter supports */ u32 (*functionality) (struct i2c_adapter *); @@ -345,7 +348,7 @@ struct i2c_algorithm { struct i2c_adapter { struct module *owner; unsigned int id; - unsigned int class; + unsigned int class; /* classes to allow probing for */ const struct i2c_algorithm *algo; /* the algorithm to access the bus */ void *algo_data; @@ -369,14 +372,14 @@ struct i2c_adapter { }; #define to_i2c_adapter(d) container_of(d, struct i2c_adapter, dev) -static inline void *i2c_get_adapdata (struct i2c_adapter *dev) +static inline void *i2c_get_adapdata(const struct i2c_adapter *dev) { - return dev_get_drvdata (&dev->dev); + return dev_get_drvdata(&dev->dev); } -static inline void i2c_set_adapdata (struct i2c_adapter *dev, void *data) +static inline void i2c_set_adapdata(struct i2c_adapter *dev, void *data) { - dev_set_drvdata (&dev->dev, data); + dev_set_drvdata(&dev->dev, data); } /*flags for the client struct: */ @@ -449,7 +452,7 @@ extern int i2c_probe(struct i2c_adapter *adapter, const struct i2c_client_address_data *address_data, int (*found_proc) (struct i2c_adapter *, int, int)); -extern struct i2c_adapter* i2c_get_adapter(int id); +extern struct i2c_adapter *i2c_get_adapter(int id); extern void i2c_put_adapter(struct i2c_adapter *adap); @@ -465,7 +468,7 @@ static inline int i2c_check_functionality(struct i2c_adapter *adap, u32 func) return (func & i2c_get_functionality(adap)) == func; } -/* Return id number for a specific adapter */ +/* Return the adapter number for a specific adapter */ static inline int i2c_adapter_id(struct i2c_adapter *adap) { return adap->nr; @@ -526,7 +529,7 @@ struct i2c_msg { #define I2C_FUNC_I2C 0x00000001 #define I2C_FUNC_10BIT_ADDR 0x00000002 -#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_{REV_DIR_ADDR,NOSTART,..} */ +#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004 /* I2C_M_NOSTART etc. */ #define I2C_FUNC_SMBUS_PEC 0x00000008 #define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000 /* SMBus 2.0 */ #define I2C_FUNC_SMBUS_QUICK 0x00010000 @@ -541,30 +544,26 @@ struct i2c_msg { #define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000 #define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000 /* I2C-like block xfer */ #define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000 /* w/ 1-byte reg. addr. */ -#define I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 0x10000000 /* I2C-like block xfer */ -#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2 0x20000000 /* w/ 2-byte reg. addr. */ - -#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \ - I2C_FUNC_SMBUS_WRITE_BYTE) -#define I2C_FUNC_SMBUS_BYTE_DATA (I2C_FUNC_SMBUS_READ_BYTE_DATA | \ - I2C_FUNC_SMBUS_WRITE_BYTE_DATA) -#define I2C_FUNC_SMBUS_WORD_DATA (I2C_FUNC_SMBUS_READ_WORD_DATA | \ - I2C_FUNC_SMBUS_WRITE_WORD_DATA) -#define I2C_FUNC_SMBUS_BLOCK_DATA (I2C_FUNC_SMBUS_READ_BLOCK_DATA | \ - I2C_FUNC_SMBUS_WRITE_BLOCK_DATA) -#define I2C_FUNC_SMBUS_I2C_BLOCK (I2C_FUNC_SMBUS_READ_I2C_BLOCK | \ - I2C_FUNC_SMBUS_WRITE_I2C_BLOCK) -#define I2C_FUNC_SMBUS_I2C_BLOCK_2 (I2C_FUNC_SMBUS_READ_I2C_BLOCK_2 | \ - I2C_FUNC_SMBUS_WRITE_I2C_BLOCK_2) - -#define I2C_FUNC_SMBUS_EMUL (I2C_FUNC_SMBUS_QUICK | \ - I2C_FUNC_SMBUS_BYTE | \ - I2C_FUNC_SMBUS_BYTE_DATA | \ - I2C_FUNC_SMBUS_WORD_DATA | \ - I2C_FUNC_SMBUS_PROC_CALL | \ - I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \ - I2C_FUNC_SMBUS_I2C_BLOCK | \ - I2C_FUNC_SMBUS_PEC) + +#define I2C_FUNC_SMBUS_BYTE (I2C_FUNC_SMBUS_READ_BYTE | \ + I2C_FUNC_SMBUS_WRITE_BYTE) +#define I2C_FUNC_SMBUS_BYTE_DATA (I2C_FUNC_SMBUS_READ_BYTE_DATA | \ + I2C_FUNC_SMBUS_WRITE_BYTE_DATA) +#define I2C_FUNC_SMBUS_WORD_DATA (I2C_FUNC_SMBUS_READ_WORD_DATA | \ + I2C_FUNC_SMBUS_WRITE_WORD_DATA) +#define I2C_FUNC_SMBUS_BLOCK_DATA (I2C_FUNC_SMBUS_READ_BLOCK_DATA | \ + I2C_FUNC_SMBUS_WRITE_BLOCK_DATA) +#define I2C_FUNC_SMBUS_I2C_BLOCK (I2C_FUNC_SMBUS_READ_I2C_BLOCK | \ + I2C_FUNC_SMBUS_WRITE_I2C_BLOCK) + +#define I2C_FUNC_SMBUS_EMUL (I2C_FUNC_SMBUS_QUICK | \ + I2C_FUNC_SMBUS_BYTE | \ + I2C_FUNC_SMBUS_BYTE_DATA | \ + I2C_FUNC_SMBUS_WORD_DATA | \ + I2C_FUNC_SMBUS_PROC_CALL | \ + I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | \ + I2C_FUNC_SMBUS_I2C_BLOCK | \ + I2C_FUNC_SMBUS_PEC) /* * Data for SMBus Messages @@ -574,7 +573,7 @@ union i2c_smbus_data { __u8 byte; __u16 word; __u8 block[I2C_SMBUS_BLOCK_MAX + 2]; /* block[0] is used for length */ - /* and one more for user-space compatibility */ + /* and one more for user-space compatibility */ }; /* i2c_smbus_xfer read or write markers */ @@ -602,21 +601,21 @@ union i2c_smbus_data { /* Default fill of many variables */ #define I2C_CLIENT_DEFAULTS {I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ - I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ - I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ - I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ - I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ - I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ - I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ - I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ - I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ - I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ - I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ - I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ - I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ - I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ - I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ - I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END} + I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ + I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ + I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ + I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ + I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ + I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ + I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ + I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ + I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ + I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ + I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ + I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ + I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ + I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END, \ + I2C_CLIENT_END, I2C_CLIENT_END, I2C_CLIENT_END} /* I2C_CLIENT_MODULE_PARM creates a module parameter, and puts it in the module header */ @@ -625,7 +624,7 @@ union i2c_smbus_data { static unsigned short var[I2C_CLIENT_MAX_OPTS] = I2C_CLIENT_DEFAULTS; \ static unsigned int var##_num; \ module_param_array(var, short, &var##_num, 0); \ - MODULE_PARM_DESC(var,desc) + MODULE_PARM_DESC(var, desc) #define I2C_CLIENT_MODULE_PARM_FORCE(name) \ I2C_CLIENT_MODULE_PARM(force_##name, \ diff --git a/include/linux/i2c/twl4030.h b/include/linux/i2c/twl4030.h index cdb453162a97..fb604dcd38f1 100644 --- a/include/linux/i2c/twl4030.h +++ b/include/linux/i2c/twl4030.h @@ -228,6 +228,12 @@ struct twl4030_gpio_platform_data { int gpio_base; unsigned irq_base, irq_end; + /* package the two LED signals as output-only GPIOs? */ + bool use_leds; + + /* gpio-n should control VMMC(n+1) if BIT(n) in mmc_cd is set */ + u8 mmc_cd; + /* For gpio-N, bit (1 << N) in "pullups" is set if that pullup * should be enabled. Else, if that bit is set in "pulldowns", * that pulldown is enabled. Don't waste power by letting any @@ -277,6 +283,8 @@ struct twl4030_platform_data { /*----------------------------------------------------------------------*/ +int twl4030_sih_setup(int module); + /* * FIXME completely stop using TWL4030_IRQ_BASE ... instead, pass the * IRQ data to subsidiary devices using platform device resources. @@ -291,16 +299,16 @@ struct twl4030_platform_data { #define TWL4030_MODIRQ_BCI (TWL4030_IRQ_BASE + 2) #define TWL4030_MODIRQ_MADC (TWL4030_IRQ_BASE + 3) /* #define TWL4030_MODIRQ_USB (TWL4030_IRQ_BASE + 4) */ -#define TWL4030_MODIRQ_PWR (TWL4030_IRQ_BASE + 5) +/* #define TWL4030_MODIRQ_PWR (TWL4030_IRQ_BASE + 5) */ #define TWL4030_PWRIRQ_PWRBTN (TWL4030_PWR_IRQ_BASE + 0) -#define TWL4030_PWRIRQ_CHG_PRES (TWL4030_PWR_IRQ_BASE + 1) -#define TWL4030_PWRIRQ_USB_PRES (TWL4030_PWR_IRQ_BASE + 2) -#define TWL4030_PWRIRQ_RTC (TWL4030_PWR_IRQ_BASE + 3) -#define TWL4030_PWRIRQ_HOT_DIE (TWL4030_PWR_IRQ_BASE + 4) -#define TWL4030_PWRIRQ_PWROK_TIMEOUT (TWL4030_PWR_IRQ_BASE + 5) -#define TWL4030_PWRIRQ_MBCHG (TWL4030_PWR_IRQ_BASE + 6) -#define TWL4030_PWRIRQ_SC_DETECT (TWL4030_PWR_IRQ_BASE + 7) +/* #define TWL4030_PWRIRQ_CHG_PRES (TWL4030_PWR_IRQ_BASE + 1) */ +/* #define TWL4030_PWRIRQ_USB_PRES (TWL4030_PWR_IRQ_BASE + 2) */ +/* #define TWL4030_PWRIRQ_RTC (TWL4030_PWR_IRQ_BASE + 3) */ +/* #define TWL4030_PWRIRQ_HOT_DIE (TWL4030_PWR_IRQ_BASE + 4) */ +/* #define TWL4030_PWRIRQ_PWROK_TIMEOUT (TWL4030_PWR_IRQ_BASE + 5) */ +/* #define TWL4030_PWRIRQ_MBCHG (TWL4030_PWR_IRQ_BASE + 6) */ +/* #define TWL4030_PWRIRQ_SC_DETECT (TWL4030_PWR_IRQ_BASE + 7) */ /* Rest are unsued currently*/ @@ -317,17 +325,13 @@ struct twl4030_platform_data { /* TWL4030 GPIO interrupt definitions */ #define TWL4030_GPIO_IRQ_NO(n) (TWL4030_GPIO_IRQ_BASE + (n)) -#define TWL4030_GPIO_IS_ENABLE 1 /* * Exported TWL4030 GPIO APIs * * WARNING -- use standard GPIO and IRQ calls instead; these will vanish. */ -int twl4030_get_gpio_datain(int gpio); -int twl4030_request_gpio(int gpio); int twl4030_set_gpio_debounce(int gpio, int enable); -int twl4030_free_gpio(int gpio); #if defined(CONFIG_TWL4030_BCI_BATTERY) || \ defined(CONFIG_TWL4030_BCI_BATTERY_MODULE) diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h index 2e117f30a76c..3d017cfd245b 100644 --- a/include/linux/intel-iommu.h +++ b/include/linux/intel-iommu.h @@ -29,6 +29,7 @@ #include <linux/io.h> #include <linux/dma_remapping.h> #include <asm/cacheflush.h> +#include <asm/iommu.h> /* * Intel IOMMU register specification per version 1.0 public spec. @@ -127,6 +128,7 @@ static inline void dmar_writeq(void __iomem *addr, u64 val) /* IOTLB_REG */ +#define DMA_TLB_FLUSH_GRANU_OFFSET 60 #define DMA_TLB_GLOBAL_FLUSH (((u64)1) << 60) #define DMA_TLB_DSI_FLUSH (((u64)2) << 60) #define DMA_TLB_PSI_FLUSH (((u64)3) << 60) @@ -140,6 +142,7 @@ static inline void dmar_writeq(void __iomem *addr, u64 val) #define DMA_TLB_MAX_SIZE (0x3f) /* INVALID_DESC */ +#define DMA_CCMD_INVL_GRANU_OFFSET 61 #define DMA_ID_TLB_GLOBAL_FLUSH (((u64)1) << 3) #define DMA_ID_TLB_DSI_FLUSH (((u64)2) << 3) #define DMA_ID_TLB_PSI_FLUSH (((u64)3) << 3) @@ -200,22 +203,21 @@ static inline void dmar_writeq(void __iomem *addr, u64 val) #define dma_frcd_type(d) ((d >> 30) & 1) #define dma_frcd_fault_reason(c) (c & 0xff) #define dma_frcd_source_id(c) (c & 0xffff) -#define dma_frcd_page_addr(d) (d & (((u64)-1) << 12)) /* low 64 bit */ - -#define DMAR_OPERATION_TIMEOUT ((cycles_t) tsc_khz*10*1000) /* 10sec */ - -#define IOMMU_WAIT_OP(iommu, offset, op, cond, sts) \ -{\ - cycles_t start_time = get_cycles();\ - while (1) {\ - sts = op (iommu->reg + offset);\ - if (cond)\ - break;\ +/* low 64 bit */ +#define dma_frcd_page_addr(d) (d & (((u64)-1) << PAGE_SHIFT)) + +#define IOMMU_WAIT_OP(iommu, offset, op, cond, sts) \ +do { \ + cycles_t start_time = get_cycles(); \ + while (1) { \ + sts = op(iommu->reg + offset); \ + if (cond) \ + break; \ if (DMAR_OPERATION_TIMEOUT < (get_cycles() - start_time))\ - panic("DMAR hardware is malfunctioning\n");\ - cpu_relax();\ - }\ -} + panic("DMAR hardware is malfunctioning\n"); \ + cpu_relax(); \ + } \ +} while (0) #define QI_LENGTH 256 /* queue length */ @@ -238,6 +240,19 @@ enum { #define QI_IWD_STATUS_DATA(d) (((u64)d) << 32) #define QI_IWD_STATUS_WRITE (((u64)1) << 5) +#define QI_IOTLB_DID(did) (((u64)did) << 16) +#define QI_IOTLB_DR(dr) (((u64)dr) << 7) +#define QI_IOTLB_DW(dw) (((u64)dw) << 6) +#define QI_IOTLB_GRAN(gran) (((u64)gran) >> (DMA_TLB_FLUSH_GRANU_OFFSET-4)) +#define QI_IOTLB_ADDR(addr) (((u64)addr) & VTD_PAGE_MASK) +#define QI_IOTLB_IH(ih) (((u64)ih) << 6) +#define QI_IOTLB_AM(am) (((u8)am)) + +#define QI_CC_FM(fm) (((u64)fm) << 48) +#define QI_CC_SID(sid) (((u64)sid) << 32) +#define QI_CC_DID(did) (((u64)did) << 16) +#define QI_CC_GRAN(gran) (((u64)gran) >> (DMA_CCMD_INVL_GRANU_OFFSET-4)) + struct qi_desc { u64 low, high; }; @@ -263,6 +278,13 @@ struct ir_table { }; #endif +struct iommu_flush { + int (*flush_context)(struct intel_iommu *iommu, u16 did, u16 sid, u8 fm, + u64 type, int non_present_entry_flush); + int (*flush_iotlb)(struct intel_iommu *iommu, u16 did, u64 addr, + unsigned int size_order, u64 type, int non_present_entry_flush); +}; + struct intel_iommu { void __iomem *reg; /* Pointer to hardware regs, virtual addr */ u64 cap; @@ -282,6 +304,7 @@ struct intel_iommu { unsigned char name[7]; /* Device Name */ struct msi_msg saved_msg; struct sys_device sysdev; + struct iommu_flush flush; #endif struct q_inval *qi; /* Queued invalidation info */ #ifdef CONFIG_INTR_REMAP @@ -303,6 +326,12 @@ extern void free_iommu(struct intel_iommu *iommu); extern int dmar_enable_qi(struct intel_iommu *iommu); extern void qi_global_iec(struct intel_iommu *iommu); +extern int qi_flush_context(struct intel_iommu *iommu, u16 did, u16 sid, + u8 fm, u64 type, int non_present_entry_flush); +extern int qi_flush_iotlb(struct intel_iommu *iommu, u16 did, u64 addr, + unsigned int size_order, u64 type, + int non_present_entry_flush); + extern void qi_submit_sync(struct qi_desc *desc, struct intel_iommu *iommu); void intel_iommu_domain_exit(struct dmar_domain *domain); @@ -324,4 +353,11 @@ static inline int intel_iommu_found(void) } #endif /* CONFIG_DMAR */ +extern void *intel_alloc_coherent(struct device *, size_t, dma_addr_t *, gfp_t); +extern void intel_free_coherent(struct device *, size_t, void *, dma_addr_t); +extern dma_addr_t intel_map_single(struct device *, phys_addr_t, size_t, int); +extern void intel_unmap_single(struct device *, dma_addr_t, size_t, int); +extern int intel_map_sg(struct device *, struct scatterlist *, int, int); +extern void intel_unmap_sg(struct device *, struct scatterlist *, int, int); + #endif diff --git a/include/linux/irqnr.h b/include/linux/irqnr.h index 3171ddc3b39d..452c280c8115 100644 --- a/include/linux/irqnr.h +++ b/include/linux/irqnr.h @@ -13,9 +13,9 @@ extern int nr_irqs; # define for_each_irq_desc(irq, desc) \ for (irq = 0, desc = irq_desc; irq < nr_irqs; irq++, desc++) -# define for_each_irq_desc_reverse(irq, desc) \ - for (irq = nr_irqs -1, desc = irq_desc + (nr_irqs -1 ); \ - irq > 0; irq--, desc--) +# define for_each_irq_desc_reverse(irq, desc) \ + for (irq = nr_irqs - 1, desc = irq_desc + (nr_irqs - 1); \ + irq >= 0; irq--, desc--) #endif #define for_each_irq_nr(irq) \ diff --git a/include/linux/jbd.h b/include/linux/jbd.h index 35d4f6342fac..346e2b80be7d 100644 --- a/include/linux/jbd.h +++ b/include/linux/jbd.h @@ -911,7 +911,7 @@ extern int journal_set_features (journal_t *, unsigned long, unsigned long, unsigned long); extern int journal_create (journal_t *); extern int journal_load (journal_t *journal); -extern void journal_destroy (journal_t *); +extern int journal_destroy (journal_t *); extern int journal_recover (journal_t *journal); extern int journal_wipe (journal_t *, int); extern int journal_skip_recovery (journal_t *); diff --git a/include/linux/libata.h b/include/linux/libata.h index 947cf84e555d..c261aa0584b1 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -340,6 +340,9 @@ enum { ATA_EHI_DID_RESET = ATA_EHI_DID_SOFTRESET | ATA_EHI_DID_HARDRESET, + /* mask of flags to transfer *to* the slave link */ + ATA_EHI_TO_SLAVE_MASK = ATA_EHI_NO_AUTOPSY | ATA_EHI_QUIET, + /* max tries if error condition is still set after ->error_handler */ ATA_EH_MAX_TRIES = 5, diff --git a/include/linux/mlx4/cmd.h b/include/linux/mlx4/cmd.h index 77323a72dd3c..cf9c679ab38b 100644 --- a/include/linux/mlx4/cmd.h +++ b/include/linux/mlx4/cmd.h @@ -132,6 +132,15 @@ enum { MLX4_MAILBOX_SIZE = 4096 }; +enum { + /* set port opcode modifiers */ + MLX4_SET_PORT_GENERAL = 0x0, + MLX4_SET_PORT_RQP_CALC = 0x1, + MLX4_SET_PORT_MAC_TABLE = 0x2, + MLX4_SET_PORT_VLAN_TABLE = 0x3, + MLX4_SET_PORT_PRIO_MAP = 0x4, +}; + struct mlx4_dev; struct mlx4_cmd_mailbox { diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index b2f944468313..bd9977b89490 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -60,6 +60,7 @@ enum { MLX4_DEV_CAP_FLAG_IPOIB_CSUM = 1 << 7, MLX4_DEV_CAP_FLAG_BAD_PKEY_CNTR = 1 << 8, MLX4_DEV_CAP_FLAG_BAD_QKEY_CNTR = 1 << 9, + MLX4_DEV_CAP_FLAG_DPDP = 1 << 12, MLX4_DEV_CAP_FLAG_MEM_WINDOW = 1 << 16, MLX4_DEV_CAP_FLAG_APM = 1 << 17, MLX4_DEV_CAP_FLAG_ATOMIC = 1 << 18, @@ -145,6 +146,29 @@ enum { MLX4_MTT_FLAG_PRESENT = 1 }; +enum mlx4_qp_region { + MLX4_QP_REGION_FW = 0, + MLX4_QP_REGION_ETH_ADDR, + MLX4_QP_REGION_FC_ADDR, + MLX4_QP_REGION_FC_EXCH, + MLX4_NUM_QP_REGION +}; + +enum mlx4_port_type { + MLX4_PORT_TYPE_IB = 1 << 0, + MLX4_PORT_TYPE_ETH = 1 << 1, +}; + +enum mlx4_special_vlan_idx { + MLX4_NO_VLAN_IDX = 0, + MLX4_VLAN_MISS_IDX, + MLX4_VLAN_REGULAR +}; + +enum { + MLX4_NUM_FEXCH = 64 * 1024, +}; + static inline u64 mlx4_fw_ver(u64 major, u64 minor, u64 subminor) { return (major << 32) | (minor << 16) | subminor; @@ -154,7 +178,9 @@ struct mlx4_caps { u64 fw_ver; int num_ports; int vl_cap[MLX4_MAX_PORTS + 1]; - int mtu_cap[MLX4_MAX_PORTS + 1]; + int ib_mtu_cap[MLX4_MAX_PORTS + 1]; + u64 def_mac[MLX4_MAX_PORTS + 1]; + int eth_mtu_cap[MLX4_MAX_PORTS + 1]; int gid_table_len[MLX4_MAX_PORTS + 1]; int pkey_table_len[MLX4_MAX_PORTS + 1]; int local_ca_ack_delay; @@ -169,7 +195,6 @@ struct mlx4_caps { int max_rq_desc_sz; int max_qp_init_rdma; int max_qp_dest_rdma; - int reserved_qps; int sqp_start; int num_srqs; int max_srq_wqes; @@ -201,6 +226,15 @@ struct mlx4_caps { u16 stat_rate_support; u8 port_width_cap[MLX4_MAX_PORTS + 1]; int max_gso_sz; + int reserved_qps_cnt[MLX4_NUM_QP_REGION]; + int reserved_qps; + int reserved_qps_base[MLX4_NUM_QP_REGION]; + int log_num_macs; + int log_num_vlans; + int log_num_prios; + enum mlx4_port_type port_type[MLX4_MAX_PORTS + 1]; + u8 supported_type[MLX4_MAX_PORTS + 1]; + u32 port_mask; }; struct mlx4_buf_list { @@ -355,6 +389,11 @@ struct mlx4_init_port_param { u64 si_guid; }; +#define mlx4_foreach_port(port, dev, type) \ + for ((port) = 1; (port) <= (dev)->caps.num_ports; (port)++) \ + if (((type) == MLX4_PORT_TYPE_IB ? (dev)->caps.port_mask : \ + ~(dev)->caps.port_mask) & 1 << ((port) - 1)) + int mlx4_buf_alloc(struct mlx4_dev *dev, int size, int max_direct, struct mlx4_buf *buf); void mlx4_buf_free(struct mlx4_dev *dev, int size, struct mlx4_buf *buf); @@ -400,7 +439,10 @@ int mlx4_cq_alloc(struct mlx4_dev *dev, int nent, struct mlx4_mtt *mtt, int collapsed); void mlx4_cq_free(struct mlx4_dev *dev, struct mlx4_cq *cq); -int mlx4_qp_alloc(struct mlx4_dev *dev, int sqpn, struct mlx4_qp *qp); +int mlx4_qp_reserve_range(struct mlx4_dev *dev, int cnt, int align, int *base); +void mlx4_qp_release_range(struct mlx4_dev *dev, int base_qpn, int cnt); + +int mlx4_qp_alloc(struct mlx4_dev *dev, int qpn, struct mlx4_qp *qp); void mlx4_qp_free(struct mlx4_dev *dev, struct mlx4_qp *qp); int mlx4_srq_alloc(struct mlx4_dev *dev, u32 pdn, struct mlx4_mtt *mtt, @@ -416,6 +458,12 @@ int mlx4_multicast_attach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16], int block_mcast_loopback); int mlx4_multicast_detach(struct mlx4_dev *dev, struct mlx4_qp *qp, u8 gid[16]); +int mlx4_register_mac(struct mlx4_dev *dev, u8 port, u64 mac, int *index); +void mlx4_unregister_mac(struct mlx4_dev *dev, u8 port, int index); + +int mlx4_register_vlan(struct mlx4_dev *dev, u8 port, u16 vlan, int *index); +void mlx4_unregister_vlan(struct mlx4_dev *dev, u8 port, int index); + int mlx4_map_phys_fmr(struct mlx4_dev *dev, struct mlx4_fmr *fmr, u64 *page_list, int npages, u64 iova, u32 *lkey, u32 *rkey); int mlx4_fmr_alloc(struct mlx4_dev *dev, u32 pd, u32 access, int max_pages, diff --git a/include/linux/module.h b/include/linux/module.h index 5d2970cdce93..3bfed013350b 100644 --- a/include/linux/module.h +++ b/include/linux/module.h @@ -29,7 +29,7 @@ #define MODULE_SYMBOL_PREFIX "" #endif -#define MODULE_NAME_LEN (64 - sizeof(unsigned long)) +#define MODULE_NAME_LEN MAX_PARAM_PREFIX_LEN struct kernel_symbol { @@ -60,6 +60,7 @@ struct module_kobject struct kobject kobj; struct module *mod; struct kobject *drivers_dir; + struct module_param_attrs *mp; }; /* These are either module local, or the kernel's dummy ones. */ @@ -242,7 +243,6 @@ struct module /* Sysfs stuff. */ struct module_kobject mkobj; - struct module_param_attrs *param_attrs; struct module_attribute *modinfo_attrs; const char *version; const char *srcversion; @@ -277,7 +277,7 @@ struct module /* Exception table */ unsigned int num_exentries; - const struct exception_table_entry *extable; + struct exception_table_entry *extable; /* Startup function. */ int (*init)(void); diff --git a/include/linux/moduleparam.h b/include/linux/moduleparam.h index ec624381c844..e4af3399ef48 100644 --- a/include/linux/moduleparam.h +++ b/include/linux/moduleparam.h @@ -13,6 +13,9 @@ #define MODULE_PARAM_PREFIX KBUILD_MODNAME "." #endif +/* Chosen so that structs with an unsigned long line up. */ +#define MAX_PARAM_PREFIX_LEN (64 - sizeof(unsigned long)) + #ifdef MODULE #define ___module_cat(a,b) __mod_ ## a ## b #define __module_cat(a,b) ___module_cat(a,b) @@ -79,7 +82,8 @@ struct kparam_array #define __module_param_call(prefix, name, set, get, arg, perm) \ /* Default value instead of permissions? */ \ static int __param_perm_check_##name __attribute__((unused)) = \ - BUILD_BUG_ON_ZERO((perm) < 0 || (perm) > 0777 || ((perm) & 2)); \ + BUILD_BUG_ON_ZERO((perm) < 0 || (perm) > 0777 || ((perm) & 2)) \ + + BUILD_BUG_ON_ZERO(sizeof(""prefix) > MAX_PARAM_PREFIX_LEN); \ static const char __param_str_##name[] = prefix #name; \ static struct kernel_param __moduleparam_const __param_##name \ __used \ @@ -100,6 +104,25 @@ struct kparam_array #define module_param(name, type, perm) \ module_param_named(name, name, type, perm) +#ifndef MODULE +/** + * core_param - define a historical core kernel parameter. + * @name: the name of the cmdline and sysfs parameter (often the same as var) + * @var: the variable + * @type: the type (for param_set_##type and param_get_##type) + * @perm: visibility in sysfs + * + * core_param is just like module_param(), but cannot be modular and + * doesn't add a prefix (such as "printk."). This is for compatibility + * with __setup(), and it makes sense as truly core parameters aren't + * tied to the particular file they're in. + */ +#define core_param(name, var, type, perm) \ + param_check_##type(name, &(var)); \ + __module_param_call("", name, param_set_##type, param_get_##type, \ + &var, perm) +#endif /* !MODULE */ + /* Actually copy string: maxlen param is usually sizeof(string). */ #define module_param_string(name, string, len, perm) \ static const struct kparam_string __param_string_##name \ diff --git a/include/linux/oprofile.h b/include/linux/oprofile.h index bcb8f725427c..5231861f357d 100644 --- a/include/linux/oprofile.h +++ b/include/linux/oprofile.h @@ -86,13 +86,6 @@ int oprofile_arch_init(struct oprofile_operations * ops); void oprofile_arch_exit(void); /** - * Add data to the event buffer. - * The data passed is free-form, but typically consists of - * file offsets, dcookies, context information, and ESCAPE codes. - */ -void add_event_entry(unsigned long data); - -/** * Add a sample. This may be called from any context. Pass * smp_processor_id() as cpu. */ @@ -162,5 +155,14 @@ int oprofilefs_ulong_from_user(unsigned long * val, char const __user * buf, siz /** lock for read/write safety */ extern spinlock_t oprofilefs_lock; + +/** + * Add the contents of a circular buffer to the event buffer. + */ +void oprofile_put_buff(unsigned long *buf, unsigned int start, + unsigned int stop, unsigned int max); + +unsigned long oprofile_get_cpu_buffer_size(void); +void oprofile_cpu_buffer_inc_smpl_lost(void); #endif /* OPROFILE_H */ diff --git a/include/linux/page_cgroup.h b/include/linux/page_cgroup.h index 0fd39f2231ec..f546ad6fc028 100644 --- a/include/linux/page_cgroup.h +++ b/include/linux/page_cgroup.h @@ -99,5 +99,10 @@ static inline struct page_cgroup *lookup_page_cgroup(struct page *page) { return NULL; } + +static inline void page_cgroup_init(void) +{ +} + #endif #endif diff --git a/include/linux/pci.h b/include/linux/pci.h index 085187be29c7..752def8a2ef4 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -51,6 +51,7 @@ #include <linux/kobject.h> #include <asm/atomic.h> #include <linux/device.h> +#include <linux/io.h> /* Include the ID list */ #include <linux/pci_ids.h> @@ -64,6 +65,11 @@ struct pci_slot { struct kobject kobj; }; +static inline const char *pci_slot_name(const struct pci_slot *slot) +{ + return kobject_name(&slot->kobj); +} + /* File state for mmap()s on /proc/bus/pci/X/Y */ enum pci_mmap_state { pci_mmap_io, @@ -509,9 +515,10 @@ struct pci_bus *pci_create_bus(struct device *parent, int bus, struct pci_bus *pci_add_new_bus(struct pci_bus *parent, struct pci_dev *dev, int busnr); struct pci_slot *pci_create_slot(struct pci_bus *parent, int slot_nr, - const char *name); + const char *name, + struct hotplug_slot *hotplug); void pci_destroy_slot(struct pci_slot *slot); -void pci_update_slot_number(struct pci_slot *slot, int slot_nr); +void pci_renumber_slot(struct pci_slot *slot, int slot_nr); int pci_scan_slot(struct pci_bus *bus, int devfn); struct pci_dev *pci_scan_single_device(struct pci_bus *bus, int devfn); void pci_device_add(struct pci_dev *dev, struct pci_bus *bus); @@ -626,6 +633,8 @@ int pcix_get_mmrbc(struct pci_dev *dev); int pcix_set_mmrbc(struct pci_dev *dev, int mmrbc); int pcie_get_readrq(struct pci_dev *dev); int pcie_set_readrq(struct pci_dev *dev, int rq); +int pci_reset_function(struct pci_dev *dev); +int pci_execute_reset_function(struct pci_dev *dev); void pci_update_resource(struct pci_dev *dev, struct resource *res, int resno); int __must_check pci_assign_resource(struct pci_dev *dev, int i); int pci_select_bars(struct pci_dev *dev, unsigned long flags); diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h index a08cd06b541a..a00bd1a0f156 100644 --- a/include/linux/pci_hotplug.h +++ b/include/linux/pci_hotplug.h @@ -142,8 +142,6 @@ struct hotplug_slot_info { /** * struct hotplug_slot - used to register a physical slot with the hotplug pci core - * @name: the name of the slot being registered. This string must - * be unique amoung slots registered on this system. * @ops: pointer to the &struct hotplug_slot_ops to be used for this slot * @info: pointer to the &struct hotplug_slot_info for the initial values for * this slot. @@ -153,7 +151,6 @@ struct hotplug_slot_info { * needs. */ struct hotplug_slot { - char *name; struct hotplug_slot_ops *ops; struct hotplug_slot_info *info; void (*release) (struct hotplug_slot *slot); @@ -165,7 +162,13 @@ struct hotplug_slot { }; #define to_hotplug_slot(n) container_of(n, struct hotplug_slot, kobj) -extern int pci_hp_register(struct hotplug_slot *, struct pci_bus *, int nr); +static inline const char *hotplug_slot_name(const struct hotplug_slot *slot) +{ + return pci_slot_name(slot->pci_slot); +} + +extern int pci_hp_register(struct hotplug_slot *, struct pci_bus *, int nr, + const char *name); extern int pci_hp_deregister(struct hotplug_slot *slot); extern int __must_check pci_hp_change_slot_info (struct hotplug_slot *slot, struct hotplug_slot_info *info); diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index bdab7c72a77f..1800f1d6e40d 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1944,6 +1944,14 @@ #define PCI_VENDOR_ID_OXSEMI 0x1415 #define PCI_DEVICE_ID_OXSEMI_12PCI840 0x8403 +#define PCI_DEVICE_ID_OXSEMI_PCIe840 0xC000 +#define PCI_DEVICE_ID_OXSEMI_PCIe840_G 0xC004 +#define PCI_DEVICE_ID_OXSEMI_PCIe952_0 0xC100 +#define PCI_DEVICE_ID_OXSEMI_PCIe952_0_G 0xC104 +#define PCI_DEVICE_ID_OXSEMI_PCIe952_1 0xC110 +#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_G 0xC114 +#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_U 0xC118 +#define PCI_DEVICE_ID_OXSEMI_PCIe952_1_GU 0xC11C #define PCI_DEVICE_ID_OXSEMI_16PCI954 0x9501 #define PCI_DEVICE_ID_OXSEMI_16PCI95N 0x9511 #define PCI_DEVICE_ID_OXSEMI_16PCI954PP 0x9513 diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index eb6686b88f9a..e5effd47ed74 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -377,6 +377,7 @@ #define PCI_EXP_DEVCAP_RBER 0x8000 /* Role-Based Error Reporting */ #define PCI_EXP_DEVCAP_PWR_VAL 0x3fc0000 /* Slot Power Limit Value */ #define PCI_EXP_DEVCAP_PWR_SCL 0xc000000 /* Slot Power Limit Scale */ +#define PCI_EXP_DEVCAP_FLR 0x10000000 /* Function Level Reset */ #define PCI_EXP_DEVCTL 8 /* Device Control */ #define PCI_EXP_DEVCTL_CERE 0x0001 /* Correctable Error Reporting En. */ #define PCI_EXP_DEVCTL_NFERE 0x0002 /* Non-Fatal Error Reporting Enable */ @@ -389,6 +390,7 @@ #define PCI_EXP_DEVCTL_AUX_PME 0x0400 /* Auxiliary Power PM Enable */ #define PCI_EXP_DEVCTL_NOSNOOP_EN 0x0800 /* Enable No Snoop */ #define PCI_EXP_DEVCTL_READRQ 0x7000 /* Max_Read_Request_Size */ +#define PCI_EXP_DEVCTL_BCR_FLR 0x8000 /* Bridge Configuration Retry / FLR */ #define PCI_EXP_DEVSTA 10 /* Device Status */ #define PCI_EXP_DEVSTA_CED 0x01 /* Correctable Error Detected */ #define PCI_EXP_DEVSTA_NFED 0x02 /* Non-Fatal Error Detected */ diff --git a/include/linux/profile.h b/include/linux/profile.h index 570045053ce9..a0fc32279fc0 100644 --- a/include/linux/profile.h +++ b/include/linux/profile.h @@ -19,10 +19,16 @@ struct notifier_block; #if defined(CONFIG_PROFILING) && defined(CONFIG_PROC_FS) void create_prof_cpu_mask(struct proc_dir_entry *de); +int create_proc_profile(void); #else static inline void create_prof_cpu_mask(struct proc_dir_entry *de) { } + +static inline int create_proc_profile(void) +{ + return 0; +} #endif enum profile_type { @@ -37,7 +43,6 @@ extern int prof_on __read_mostly; /* init basic kernel profiler */ int profile_init(void); int profile_setup(char *str); -int create_proc_profile(void); void profile_tick(int type); /* diff --git a/include/linux/sched.h b/include/linux/sched.h index 5c38db536e07..10bff55b0824 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -287,7 +287,6 @@ extern void trap_init(void); extern void account_process_tick(struct task_struct *task, int user); extern void update_process_times(int user); extern void scheduler_tick(void); -extern void hrtick_resched(void); extern void sched_show_task(struct task_struct *p); @@ -1665,6 +1664,7 @@ extern unsigned int sysctl_sched_features; extern unsigned int sysctl_sched_migration_cost; extern unsigned int sysctl_sched_nr_migrate; extern unsigned int sysctl_sched_shares_ratelimit; +extern unsigned int sysctl_sched_shares_thresh; int sched_nr_latency_handler(struct ctl_table *table, int write, struct file *file, void __user *buffer, size_t *length, diff --git a/include/linux/usb/wusb-wa.h b/include/linux/usb/wusb-wa.h new file mode 100644 index 000000000000..a102561e7026 --- /dev/null +++ b/include/linux/usb/wusb-wa.h @@ -0,0 +1,271 @@ +/* + * Wireless USB Wire Adapter constants and structures. + * + * Copyright (C) 2005-2006 Intel Corporation. + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + * FIXME: organize properly, group logically + * + * All the event structures are defined in uwb/spec.h, as they are + * common to the WHCI and WUSB radio control interfaces. + * + * References: + * [WUSB] Wireless Universal Serial Bus Specification, revision 1.0, ch8 + */ +#ifndef __LINUX_USB_WUSB_WA_H +#define __LINUX_USB_WUSB_WA_H + +/** + * Radio Command Request for the Radio Control Interface + * + * Radio Control Interface command and event codes are the same as + * WHCI, and listed in include/linux/uwb.h:UWB_RC_{CMD,EVT}_* + */ +enum { + WA_EXEC_RC_CMD = 40, /* Radio Control command Request */ +}; + +/* Wireless Adapter Requests ([WUSB] table 8-51) */ +enum { + WUSB_REQ_ADD_MMC_IE = 20, + WUSB_REQ_REMOVE_MMC_IE = 21, + WUSB_REQ_SET_NUM_DNTS = 22, + WUSB_REQ_SET_CLUSTER_ID = 23, + WUSB_REQ_SET_DEV_INFO = 24, + WUSB_REQ_GET_TIME = 25, + WUSB_REQ_SET_STREAM_IDX = 26, + WUSB_REQ_SET_WUSB_MAS = 27, +}; + + +/* Wireless Adapter WUSB Channel Time types ([WUSB] table 8-52) */ +enum { + WUSB_TIME_ADJ = 0, + WUSB_TIME_BPST = 1, + WUSB_TIME_WUSB = 2, +}; + +enum { + WA_ENABLE = 0x01, + WA_RESET = 0x02, + RPIPE_PAUSE = 0x1, +}; + +/* Responses from Get Status request ([WUSB] section 8.3.1.6) */ +enum { + WA_STATUS_ENABLED = 0x01, + WA_STATUS_RESETTING = 0x02 +}; + +enum rpipe_crs { + RPIPE_CRS_CTL = 0x01, + RPIPE_CRS_ISO = 0x02, + RPIPE_CRS_BULK = 0x04, + RPIPE_CRS_INTR = 0x08 +}; + +/** + * RPipe descriptor ([WUSB] section 8.5.2.11) + * + * FIXME: explain rpipes + */ +struct usb_rpipe_descriptor { + u8 bLength; + u8 bDescriptorType; + __le16 wRPipeIndex; + __le16 wRequests; + __le16 wBlocks; /* rw if 0 */ + __le16 wMaxPacketSize; /* rw? */ + u8 bHSHubAddress; /* reserved: 0 */ + u8 bHSHubPort; /* ??? FIXME ??? */ + u8 bSpeed; /* rw: xfer rate 'enum uwb_phy_rate' */ + u8 bDeviceAddress; /* rw: Target device address */ + u8 bEndpointAddress; /* rw: Target EP address */ + u8 bDataSequence; /* ro: Current Data sequence */ + __le32 dwCurrentWindow; /* ro */ + u8 bMaxDataSequence; /* ro?: max supported seq */ + u8 bInterval; /* rw: */ + u8 bOverTheAirInterval; /* rw: */ + u8 bmAttribute; /* ro? */ + u8 bmCharacteristics; /* ro? enum rpipe_attr, supported xsactions */ + u8 bmRetryOptions; /* rw? */ + __le16 wNumTransactionErrors; /* rw */ +} __attribute__ ((packed)); + +/** + * Wire Adapter Notification types ([WUSB] sections 8.4.5 & 8.5.4) + * + * These are the notifications coming on the notification endpoint of + * an HWA and a DWA. + */ +enum wa_notif_type { + DWA_NOTIF_RWAKE = 0x91, + DWA_NOTIF_PORTSTATUS = 0x92, + WA_NOTIF_TRANSFER = 0x93, + HWA_NOTIF_BPST_ADJ = 0x94, + HWA_NOTIF_DN = 0x95, +}; + +/** + * Wire Adapter notification header + * + * Notifications coming from a wire adapter use a common header + * defined in [WUSB] sections 8.4.5 & 8.5.4. + */ +struct wa_notif_hdr { + u8 bLength; + u8 bNotifyType; /* enum wa_notif_type */ +} __attribute__((packed)); + +/** + * HWA DN Received notification [(WUSB] section 8.5.4.2) + * + * The DNData is specified in WUSB1.0[7.6]. For each device + * notification we received, we just need to dispatch it. + * + * @dndata: this is really an array of notifications, but all start + * with the same header. + */ +struct hwa_notif_dn { + struct wa_notif_hdr hdr; + u8 bSourceDeviceAddr; /* from errata 2005/07 */ + u8 bmAttributes; + struct wusb_dn_hdr dndata[]; +} __attribute__((packed)); + +/* [WUSB] section 8.3.3 */ +enum wa_xfer_type { + WA_XFER_TYPE_CTL = 0x80, + WA_XFER_TYPE_BI = 0x81, /* bulk/interrupt */ + WA_XFER_TYPE_ISO = 0x82, + WA_XFER_RESULT = 0x83, + WA_XFER_ABORT = 0x84, +}; + +/* [WUSB] section 8.3.3 */ +struct wa_xfer_hdr { + u8 bLength; /* 0x18 */ + u8 bRequestType; /* 0x80 WA_REQUEST_TYPE_CTL */ + __le16 wRPipe; /* RPipe index */ + __le32 dwTransferID; /* Host-assigned ID */ + __le32 dwTransferLength; /* Length of data to xfer */ + u8 bTransferSegment; +} __attribute__((packed)); + +struct wa_xfer_ctl { + struct wa_xfer_hdr hdr; + u8 bmAttribute; + __le16 wReserved; + struct usb_ctrlrequest baSetupData; +} __attribute__((packed)); + +struct wa_xfer_bi { + struct wa_xfer_hdr hdr; + u8 bReserved; + __le16 wReserved; +} __attribute__((packed)); + +struct wa_xfer_hwaiso { + struct wa_xfer_hdr hdr; + u8 bReserved; + __le16 wPresentationTime; + __le32 dwNumOfPackets; + /* FIXME: u8 pktdata[]? */ +} __attribute__((packed)); + +/* [WUSB] section 8.3.3.5 */ +struct wa_xfer_abort { + u8 bLength; + u8 bRequestType; + __le16 wRPipe; /* RPipe index */ + __le32 dwTransferID; /* Host-assigned ID */ +} __attribute__((packed)); + +/** + * WA Transfer Complete notification ([WUSB] section 8.3.3.3) + * + */ +struct wa_notif_xfer { + struct wa_notif_hdr hdr; + u8 bEndpoint; + u8 Reserved; +} __attribute__((packed)); + +/** Transfer result basic codes [WUSB] table 8-15 */ +enum { + WA_XFER_STATUS_SUCCESS, + WA_XFER_STATUS_HALTED, + WA_XFER_STATUS_DATA_BUFFER_ERROR, + WA_XFER_STATUS_BABBLE, + WA_XFER_RESERVED, + WA_XFER_STATUS_NOT_FOUND, + WA_XFER_STATUS_INSUFFICIENT_RESOURCE, + WA_XFER_STATUS_TRANSACTION_ERROR, + WA_XFER_STATUS_ABORTED, + WA_XFER_STATUS_RPIPE_NOT_READY, + WA_XFER_INVALID_FORMAT, + WA_XFER_UNEXPECTED_SEGMENT_NUMBER, + WA_XFER_STATUS_RPIPE_TYPE_MISMATCH, +}; + +/** [WUSB] section 8.3.3.4 */ +struct wa_xfer_result { + struct wa_notif_hdr hdr; + __le32 dwTransferID; + __le32 dwTransferLength; + u8 bTransferSegment; + u8 bTransferStatus; + __le32 dwNumOfPackets; +} __attribute__((packed)); + +/** + * Wire Adapter Class Descriptor ([WUSB] section 8.5.2.7). + * + * NOTE: u16 fields are read Little Endian from the hardware. + * + * @bNumPorts is the original max number of devices that the host can + * connect; we might chop this so the stack can handle + * it. In case you need to access it, use wusbhc->ports_max + * if it is a Wireless USB WA. + */ +struct usb_wa_descriptor { + u8 bLength; + u8 bDescriptorType; + u16 bcdWAVersion; + u8 bNumPorts; /* don't use!! */ + u8 bmAttributes; /* Reserved == 0 */ + u16 wNumRPipes; + u16 wRPipeMaxBlock; + u8 bRPipeBlockSize; + u8 bPwrOn2PwrGood; + u8 bNumMMCIEs; + u8 DeviceRemovable; /* FIXME: in DWA this is up to 16 bytes */ +} __attribute__((packed)); + +/** + * HWA Device Information Buffer (WUSB1.0[T8.54]) + */ +struct hwa_dev_info { + u8 bmDeviceAvailability[32]; /* FIXME: ignored for now */ + u8 bDeviceAddress; + __le16 wPHYRates; + u8 bmDeviceAttribute; +} __attribute__((packed)); + +#endif /* #ifndef __LINUX_USB_WUSB_WA_H */ diff --git a/include/linux/usb/wusb.h b/include/linux/usb/wusb.h new file mode 100644 index 000000000000..5f401b644ed5 --- /dev/null +++ b/include/linux/usb/wusb.h @@ -0,0 +1,376 @@ +/* + * Wireless USB Standard Definitions + * Event Size Tables + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + * FIXME: organize properly, group logically + * + * All the event structures are defined in uwb/spec.h, as they are + * common to the WHCI and WUSB radio control interfaces. + */ + +#ifndef __WUSB_H__ +#define __WUSB_H__ + +#include <linux/types.h> +#include <linux/kernel.h> +#include <linux/uwb/spec.h> +#include <linux/usb/ch9.h> +#include <linux/param.h> + +/** + * WUSB Information Element header + * + * I don't know why, they decided to make it different to the MBOA MAC + * IE Header; beats me. + */ +struct wuie_hdr { + u8 bLength; + u8 bIEIdentifier; +} __attribute__((packed)); + +enum { + WUIE_ID_WCTA = 0x80, + WUIE_ID_CONNECTACK, + WUIE_ID_HOST_INFO, + WUIE_ID_CHANGE_ANNOUNCE, + WUIE_ID_DEVICE_DISCONNECT, + WUIE_ID_HOST_DISCONNECT, + WUIE_ID_KEEP_ALIVE = 0x89, + WUIE_ID_ISOCH_DISCARD, + WUIE_ID_RESET_DEVICE, +}; + +/** + * Maximum number of array elements in a WUSB IE. + * + * WUSB1.0[7.5 before table 7-38] says that in WUSB IEs that + * are "arrays" have to limited to 4 elements. So we define it + * like that to ease up and submit only the neeed size. + */ +#define WUIE_ELT_MAX 4 + +/** + * Wrapper for the data that defines a CHID, a CDID or a CK + * + * WUSB defines that CHIDs, CDIDs and CKs are a 16 byte string of + * data. In order to avoid confusion and enforce types, we wrap it. + * + * Make it packed, as we use it in some hw defintions. + */ +struct wusb_ckhdid { + u8 data[16]; +} __attribute__((packed)); + +const static +struct wusb_ckhdid wusb_ckhdid_zero = { .data = { 0 } }; + +#define WUSB_CKHDID_STRSIZE (3 * sizeof(struct wusb_ckhdid) + 1) + +/** + * WUSB IE: Host Information (WUSB1.0[7.5.2]) + * + * Used to provide information about the host to the Wireless USB + * devices in range (CHID can be used as an ASCII string). + */ +struct wuie_host_info { + struct wuie_hdr hdr; + __le16 attributes; + struct wusb_ckhdid CHID; +} __attribute__((packed)); + +/** + * WUSB IE: Connect Ack (WUSB1.0[7.5.1]) + * + * Used to acknowledge device connect requests. See note for + * WUIE_ELT_MAX. + */ +struct wuie_connect_ack { + struct wuie_hdr hdr; + struct { + struct wusb_ckhdid CDID; + u8 bDeviceAddress; /* 0 means unused */ + u8 bReserved; + } blk[WUIE_ELT_MAX]; +} __attribute__((packed)); + +/** + * WUSB IE Host Information Element, Connect Availability + * + * WUSB1.0[7.5.2], bmAttributes description + */ +enum { + WUIE_HI_CAP_RECONNECT = 0, + WUIE_HI_CAP_LIMITED, + WUIE_HI_CAP_RESERVED, + WUIE_HI_CAP_ALL, +}; + +/** + * WUSB IE: Channel Stop (WUSB1.0[7.5.8]) + * + * Tells devices the host is going to stop sending MMCs and will dissapear. + */ +struct wuie_channel_stop { + struct wuie_hdr hdr; + u8 attributes; + u8 timestamp[3]; +} __attribute__((packed)); + +/** + * WUSB IE: Keepalive (WUSB1.0[7.5.9]) + * + * Ask device(s) to send keepalives. + */ +struct wuie_keep_alive { + struct wuie_hdr hdr; + u8 bDeviceAddress[WUIE_ELT_MAX]; +} __attribute__((packed)); + +/** + * WUSB IE: Reset device (WUSB1.0[7.5.11]) + * + * Tell device to reset; in all truth, we can fit 4 CDIDs, but we only + * use it for one at the time... + * + * In any case, this request is a wee bit silly: why don't they target + * by address?? + */ +struct wuie_reset { + struct wuie_hdr hdr; + struct wusb_ckhdid CDID; +} __attribute__((packed)); + +/** + * WUSB IE: Disconnect device (WUSB1.0[7.5.11]) + * + * Tell device to disconnect; we can fit 4 addresses, but we only use + * it for one at the time... + */ +struct wuie_disconnect { + struct wuie_hdr hdr; + u8 bDeviceAddress; + u8 padding; +} __attribute__((packed)); + +/** + * WUSB IE: Host disconnect ([WUSB] section 7.5.5) + * + * Tells all connected devices to disconnect. + */ +struct wuie_host_disconnect { + struct wuie_hdr hdr; +} __attribute__((packed)); + +/** + * WUSB Device Notification header (WUSB1.0[7.6]) + */ +struct wusb_dn_hdr { + u8 bType; + u8 notifdata[]; +} __attribute__((packed)); + +/** Device Notification codes (WUSB1.0[Table 7-54]) */ +enum WUSB_DN { + WUSB_DN_CONNECT = 0x01, + WUSB_DN_DISCONNECT = 0x02, + WUSB_DN_EPRDY = 0x03, + WUSB_DN_MASAVAILCHANGED = 0x04, + WUSB_DN_RWAKE = 0x05, + WUSB_DN_SLEEP = 0x06, + WUSB_DN_ALIVE = 0x07, +}; + +/** WUSB Device Notification Connect */ +struct wusb_dn_connect { + struct wusb_dn_hdr hdr; + __le16 attributes; + struct wusb_ckhdid CDID; +} __attribute__((packed)); + +static inline int wusb_dn_connect_prev_dev_addr(const struct wusb_dn_connect *dn) +{ + return le16_to_cpu(dn->attributes) & 0xff; +} + +static inline int wusb_dn_connect_new_connection(const struct wusb_dn_connect *dn) +{ + return (le16_to_cpu(dn->attributes) >> 8) & 0x1; +} + +static inline int wusb_dn_connect_beacon_behavior(const struct wusb_dn_connect *dn) +{ + return (le16_to_cpu(dn->attributes) >> 9) & 0x03; +} + +/** Device is alive (aka: pong) (WUSB1.0[7.6.7]) */ +struct wusb_dn_alive { + struct wusb_dn_hdr hdr; +} __attribute__((packed)); + +/** Device is disconnecting (WUSB1.0[7.6.2]) */ +struct wusb_dn_disconnect { + struct wusb_dn_hdr hdr; +} __attribute__((packed)); + +/* General constants */ +enum { + WUSB_TRUST_TIMEOUT_MS = 4000, /* [WUSB] section 4.15.1 */ +}; + +static inline size_t ckhdid_printf(char *pr_ckhdid, size_t size, + const struct wusb_ckhdid *ckhdid) +{ + return scnprintf(pr_ckhdid, size, + "%02hx %02hx %02hx %02hx %02hx %02hx %02hx %02hx " + "%02hx %02hx %02hx %02hx %02hx %02hx %02hx %02hx", + ckhdid->data[0], ckhdid->data[1], + ckhdid->data[2], ckhdid->data[3], + ckhdid->data[4], ckhdid->data[5], + ckhdid->data[6], ckhdid->data[7], + ckhdid->data[8], ckhdid->data[9], + ckhdid->data[10], ckhdid->data[11], + ckhdid->data[12], ckhdid->data[13], + ckhdid->data[14], ckhdid->data[15]); +} + +/* + * WUSB Crypto stuff (WUSB1.0[6]) + */ + +extern const char *wusb_et_name(u8); + +/** + * WUSB key index WUSB1.0[7.3.2.4], for usage when setting keys for + * the host or the device. + */ +static inline u8 wusb_key_index(int index, int type, int originator) +{ + return (originator << 6) | (type << 4) | index; +} + +#define WUSB_KEY_INDEX_TYPE_PTK 0 /* for HWA only */ +#define WUSB_KEY_INDEX_TYPE_ASSOC 1 +#define WUSB_KEY_INDEX_TYPE_GTK 2 +#define WUSB_KEY_INDEX_ORIGINATOR_HOST 0 +#define WUSB_KEY_INDEX_ORIGINATOR_DEVICE 1 + +/* A CCM Nonce, defined in WUSB1.0[6.4.1] */ +struct aes_ccm_nonce { + u8 sfn[6]; /* Little Endian */ + u8 tkid[3]; /* LE */ + struct uwb_dev_addr dest_addr; + struct uwb_dev_addr src_addr; +} __attribute__((packed)); + +/* A CCM operation label, defined on WUSB1.0[6.5.x] */ +struct aes_ccm_label { + u8 data[14]; +} __attribute__((packed)); + +/* + * Input to the key derivation sequence defined in + * WUSB1.0[6.5.1]. Rest of the data is in the CCM Nonce passed to the + * PRF function. + */ +struct wusb_keydvt_in { + u8 hnonce[16]; + u8 dnonce[16]; +} __attribute__((packed)); + +/* + * Output from the key derivation sequence defined in + * WUSB1.0[6.5.1]. + */ +struct wusb_keydvt_out { + u8 kck[16]; + u8 ptk[16]; +} __attribute__((packed)); + +/* Pseudo Random Function WUSB1.0[6.5] */ +extern int wusb_crypto_init(void); +extern void wusb_crypto_exit(void); +extern ssize_t wusb_prf(void *out, size_t out_size, + const u8 key[16], const struct aes_ccm_nonce *_n, + const struct aes_ccm_label *a, + const void *b, size_t blen, size_t len); + +static inline int wusb_prf_64(void *out, size_t out_size, const u8 key[16], + const struct aes_ccm_nonce *n, + const struct aes_ccm_label *a, + const void *b, size_t blen) +{ + return wusb_prf(out, out_size, key, n, a, b, blen, 64); +} + +static inline int wusb_prf_128(void *out, size_t out_size, const u8 key[16], + const struct aes_ccm_nonce *n, + const struct aes_ccm_label *a, + const void *b, size_t blen) +{ + return wusb_prf(out, out_size, key, n, a, b, blen, 128); +} + +static inline int wusb_prf_256(void *out, size_t out_size, const u8 key[16], + const struct aes_ccm_nonce *n, + const struct aes_ccm_label *a, + const void *b, size_t blen) +{ + return wusb_prf(out, out_size, key, n, a, b, blen, 256); +} + +/* Key derivation WUSB1.0[6.5.1] */ +static inline int wusb_key_derive(struct wusb_keydvt_out *keydvt_out, + const u8 key[16], + const struct aes_ccm_nonce *n, + const struct wusb_keydvt_in *keydvt_in) +{ + const struct aes_ccm_label a = { .data = "Pair-wise keys" }; + return wusb_prf_256(keydvt_out, sizeof(*keydvt_out), key, n, &a, + keydvt_in, sizeof(*keydvt_in)); +} + +/* + * Out-of-band MIC Generation WUSB1.0[6.5.2] + * + * Compute the MIC over @key, @n and @hs and place it in @mic_out. + * + * @mic_out: Where to place the 8 byte MIC tag + * @key: KCK from the derivation process + * @n: CCM nonce, n->sfn == 0, TKID as established in the + * process. + * @hs: Handshake struct for phase 2 of the 4-way. + * hs->bStatus and hs->bReserved are zero. + * hs->bMessageNumber is 2 (WUSB1.0[7.3.2.5.2] + * hs->dest_addr is the device's USB address padded with 0 + * hs->src_addr is the hosts's UWB device address + * hs->mic is ignored (as we compute that value). + */ +static inline int wusb_oob_mic(u8 mic_out[8], const u8 key[16], + const struct aes_ccm_nonce *n, + const struct usb_handshake *hs) +{ + const struct aes_ccm_label a = { .data = "out-of-bandMIC" }; + return wusb_prf_64(mic_out, 8, key, n, &a, + hs, sizeof(*hs) - sizeof(hs->MIC)); +} + +#endif /* #ifndef __WUSB_H__ */ diff --git a/include/linux/uwb.h b/include/linux/uwb.h new file mode 100644 index 000000000000..f9ccbd9a2ced --- /dev/null +++ b/include/linux/uwb.h @@ -0,0 +1,765 @@ +/* + * Ultra Wide Band + * UWB API + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: doc: overview of the API, different parts and pointers + */ + +#ifndef __LINUX__UWB_H__ +#define __LINUX__UWB_H__ + +#include <linux/limits.h> +#include <linux/device.h> +#include <linux/mutex.h> +#include <linux/timer.h> +#include <linux/workqueue.h> +#include <linux/uwb/spec.h> + +struct uwb_dev; +struct uwb_beca_e; +struct uwb_rc; +struct uwb_rsv; +struct uwb_dbg; + +/** + * struct uwb_dev - a UWB Device + * @rc: UWB Radio Controller that discovered the device (kind of its + * parent). + * @bce: a beacon cache entry for this device; or NULL if the device + * is a local radio controller. + * @mac_addr: the EUI-48 address of this device. + * @dev_addr: the current DevAddr used by this device. + * @beacon_slot: the slot number the beacon is using. + * @streams: bitmap of streams allocated to reservations targeted at + * this device. For an RC, this is the streams allocated for + * reservations targeted at DevAddrs. + * + * A UWB device may either by a neighbor or part of a local radio + * controller. + */ +struct uwb_dev { + struct mutex mutex; + struct list_head list_node; + struct device dev; + struct uwb_rc *rc; /* radio controller */ + struct uwb_beca_e *bce; /* Beacon Cache Entry */ + + struct uwb_mac_addr mac_addr; + struct uwb_dev_addr dev_addr; + int beacon_slot; + DECLARE_BITMAP(streams, UWB_NUM_STREAMS); +}; +#define to_uwb_dev(d) container_of(d, struct uwb_dev, dev) + +/** + * UWB HWA/WHCI Radio Control {Command|Event} Block context IDs + * + * RC[CE]Bs have a 'context ID' field that matches the command with + * the event received to confirm it. + * + * Maximum number of context IDs + */ +enum { UWB_RC_CTX_MAX = 256 }; + + +/** Notification chain head for UWB generated events to listeners */ +struct uwb_notifs_chain { + struct list_head list; + struct mutex mutex; +}; + +/** + * struct uwb_mas_bm - a bitmap of all MAS in a superframe + * @bm: a bitmap of length #UWB_NUM_MAS + */ +struct uwb_mas_bm { + DECLARE_BITMAP(bm, UWB_NUM_MAS); +}; + +/** + * uwb_rsv_state - UWB Reservation state. + * + * NONE - reservation is not active (no DRP IE being transmitted). + * + * Owner reservation states: + * + * INITIATED - owner has sent an initial DRP request. + * PENDING - target responded with pending Reason Code. + * MODIFIED - reservation manager is modifying an established + * reservation with a different MAS allocation. + * ESTABLISHED - the reservation has been successfully negotiated. + * + * Target reservation states: + * + * DENIED - request is denied. + * ACCEPTED - request is accepted. + * PENDING - PAL has yet to make a decision to whether to accept or + * deny. + * + * FIXME: further target states TBD. + */ +enum uwb_rsv_state { + UWB_RSV_STATE_NONE, + UWB_RSV_STATE_O_INITIATED, + UWB_RSV_STATE_O_PENDING, + UWB_RSV_STATE_O_MODIFIED, + UWB_RSV_STATE_O_ESTABLISHED, + UWB_RSV_STATE_T_ACCEPTED, + UWB_RSV_STATE_T_DENIED, + UWB_RSV_STATE_T_PENDING, + + UWB_RSV_STATE_LAST, +}; + +enum uwb_rsv_target_type { + UWB_RSV_TARGET_DEV, + UWB_RSV_TARGET_DEVADDR, +}; + +/** + * struct uwb_rsv_target - the target of a reservation. + * + * Reservations unicast and targeted at a single device + * (UWB_RSV_TARGET_DEV); or (e.g., in the case of WUSB) targeted at a + * specific (private) DevAddr (UWB_RSV_TARGET_DEVADDR). + */ +struct uwb_rsv_target { + enum uwb_rsv_target_type type; + union { + struct uwb_dev *dev; + struct uwb_dev_addr devaddr; + }; +}; + +/* + * Number of streams reserved for reservations targeted at DevAddrs. + */ +#define UWB_NUM_GLOBAL_STREAMS 1 + +typedef void (*uwb_rsv_cb_f)(struct uwb_rsv *rsv); + +/** + * struct uwb_rsv - a DRP reservation + * + * Data structure management: + * + * @rc: the radio controller this reservation is for + * (as target or owner) + * @rc_node: a list node for the RC + * @pal_node: a list node for the PAL + * + * Owner and target parameters: + * + * @owner: the UWB device owning this reservation + * @target: the target UWB device + * @type: reservation type + * + * Owner parameters: + * + * @max_mas: maxiumum number of MAS + * @min_mas: minimum number of MAS + * @sparsity: owner selected sparsity + * @is_multicast: true iff multicast + * + * @callback: callback function when the reservation completes + * @pal_priv: private data for the PAL making the reservation + * + * Reservation status: + * + * @status: negotiation status + * @stream: stream index allocated for this reservation + * @mas: reserved MAS + * @drp_ie: the DRP IE + * @ie_valid: true iff the DRP IE matches the reservation parameters + * + * DRP reservations are uniquely identified by the owner, target and + * stream index. However, when using a DevAddr as a target (e.g., for + * a WUSB cluster reservation) the responses may be received from + * devices with different DevAddrs. In this case, reservations are + * uniquely identified by just the stream index. A number of stream + * indexes (UWB_NUM_GLOBAL_STREAMS) are reserved for this. + */ +struct uwb_rsv { + struct uwb_rc *rc; + struct list_head rc_node; + struct list_head pal_node; + + struct uwb_dev *owner; + struct uwb_rsv_target target; + enum uwb_drp_type type; + int max_mas; + int min_mas; + int sparsity; + bool is_multicast; + + uwb_rsv_cb_f callback; + void *pal_priv; + + enum uwb_rsv_state state; + u8 stream; + struct uwb_mas_bm mas; + struct uwb_ie_drp *drp_ie; + bool ie_valid; + struct timer_list timer; + bool expired; +}; + +static const +struct uwb_mas_bm uwb_mas_bm_zero = { .bm = { 0 } }; + +static inline void uwb_mas_bm_copy_le(void *dst, const struct uwb_mas_bm *mas) +{ + bitmap_copy_le(dst, mas->bm, UWB_NUM_MAS); +} + +/** + * struct uwb_drp_avail - a radio controller's view of MAS usage + * @global: MAS unused by neighbors (excluding reservations targetted + * or owned by the local radio controller) or the beaon period + * @local: MAS unused by local established reservations + * @pending: MAS unused by local pending reservations + * @ie: DRP Availability IE to be included in the beacon + * @ie_valid: true iff @ie is valid and does not need to regenerated from + * @global and @local + * + * Each radio controller maintains a view of MAS usage or + * availability. MAS available for a new reservation are determined + * from the intersection of @global, @local, and @pending. + * + * The radio controller must transmit a DRP Availability IE that's the + * intersection of @global and @local. + * + * A set bit indicates the MAS is unused and available. + * + * rc->rsvs_mutex should be held before accessing this data structure. + * + * [ECMA-368] section 17.4.3. + */ +struct uwb_drp_avail { + DECLARE_BITMAP(global, UWB_NUM_MAS); + DECLARE_BITMAP(local, UWB_NUM_MAS); + DECLARE_BITMAP(pending, UWB_NUM_MAS); + struct uwb_ie_drp_avail ie; + bool ie_valid; +}; + + +const char *uwb_rsv_state_str(enum uwb_rsv_state state); +const char *uwb_rsv_type_str(enum uwb_drp_type type); + +struct uwb_rsv *uwb_rsv_create(struct uwb_rc *rc, uwb_rsv_cb_f cb, + void *pal_priv); +void uwb_rsv_destroy(struct uwb_rsv *rsv); + +int uwb_rsv_establish(struct uwb_rsv *rsv); +int uwb_rsv_modify(struct uwb_rsv *rsv, + int max_mas, int min_mas, int sparsity); +void uwb_rsv_terminate(struct uwb_rsv *rsv); + +void uwb_rsv_accept(struct uwb_rsv *rsv, uwb_rsv_cb_f cb, void *pal_priv); + +/** + * Radio Control Interface instance + * + * + * Life cycle rules: those of the UWB Device. + * + * @index: an index number for this radio controller, as used in the + * device name. + * @version: version of protocol supported by this device + * @priv: Backend implementation; rw with uwb_dev.dev.sem taken. + * @cmd: Backend implementation to execute commands; rw and call + * only with uwb_dev.dev.sem taken. + * @reset: Hardware reset of radio controller and any PAL controllers. + * @filter: Backend implementation to manipulate data to and from device + * to be compliant to specification assumed by driver (WHCI + * 0.95). + * + * uwb_dev.dev.mutex is used to execute commands and update + * the corresponding structures; can't use a spinlock + * because rc->cmd() can sleep. + * @ies: This is a dynamically allocated array cacheing the + * IEs (settable by the host) that the beacon of this + * radio controller is currently sending. + * + * In reality, we store here the full command we set to + * the radio controller (which is basically a command + * prefix followed by all the IEs the beacon currently + * contains). This way we don't have to realloc and + * memcpy when setting it. + * + * We set this up in uwb_rc_ie_setup(), where we alloc + * this struct, call get_ie() [so we know which IEs are + * currently being sent, if any]. + * + * @ies_capacity:Amount of space (in bytes) allocated in @ies. The + * amount used is given by sizeof(*ies) plus ies->wIELength + * (which is a little endian quantity all the time). + * @ies_mutex: protect the IE cache + * @dbg: information for the debug interface + */ +struct uwb_rc { + struct uwb_dev uwb_dev; + int index; + u16 version; + + struct module *owner; + void *priv; + int (*start)(struct uwb_rc *rc); + void (*stop)(struct uwb_rc *rc); + int (*cmd)(struct uwb_rc *, const struct uwb_rccb *, size_t); + int (*reset)(struct uwb_rc *rc); + int (*filter_cmd)(struct uwb_rc *, struct uwb_rccb **, size_t *); + int (*filter_event)(struct uwb_rc *, struct uwb_rceb **, const size_t, + size_t *, size_t *); + + spinlock_t neh_lock; /* protects neh_* and ctx_* */ + struct list_head neh_list; /* Open NE handles */ + unsigned long ctx_bm[UWB_RC_CTX_MAX / 8 / sizeof(unsigned long)]; + u8 ctx_roll; + + int beaconing; /* Beaconing state [channel number] */ + int scanning; + enum uwb_scan_type scan_type:3; + unsigned ready:1; + struct uwb_notifs_chain notifs_chain; + + struct uwb_drp_avail drp_avail; + struct list_head reservations; + struct mutex rsvs_mutex; + struct workqueue_struct *rsv_workq; + struct work_struct rsv_update_work; + + struct mutex ies_mutex; + struct uwb_rc_cmd_set_ie *ies; + size_t ies_capacity; + + spinlock_t pal_lock; + struct list_head pals; + + struct uwb_dbg *dbg; +}; + + +/** + * struct uwb_pal - a UWB PAL + * @name: descriptive name for this PAL (wushc, wlp, etc.). + * @device: a device for the PAL. Used to link the PAL and the radio + * controller in sysfs. + * @new_rsv: called when a peer requests a reservation (may be NULL if + * the PAL cannot accept reservation requests). + * + * A Protocol Adaptation Layer (PAL) is a user of the WiMedia UWB + * radio platform (e.g., WUSB, WLP or Bluetooth UWB AMP). + * + * The PALs using a radio controller must register themselves to + * permit the UWB stack to coordinate usage of the radio between the + * various PALs or to allow PALs to response to certain requests from + * peers. + * + * A struct uwb_pal should be embedded in a containing structure + * belonging to the PAL and initialized with uwb_pal_init()). Fields + * should be set appropriately by the PAL before registering the PAL + * with uwb_pal_register(). + */ +struct uwb_pal { + struct list_head node; + const char *name; + struct device *device; + void (*new_rsv)(struct uwb_rsv *rsv); +}; + +void uwb_pal_init(struct uwb_pal *pal); +int uwb_pal_register(struct uwb_rc *rc, struct uwb_pal *pal); +void uwb_pal_unregister(struct uwb_rc *rc, struct uwb_pal *pal); + +/* + * General public API + * + * This API can be used by UWB device drivers or by those implementing + * UWB Radio Controllers + */ +struct uwb_dev *uwb_dev_get_by_devaddr(struct uwb_rc *rc, + const struct uwb_dev_addr *devaddr); +struct uwb_dev *uwb_dev_get_by_rc(struct uwb_dev *, struct uwb_rc *); +static inline void uwb_dev_get(struct uwb_dev *uwb_dev) +{ + get_device(&uwb_dev->dev); +} +static inline void uwb_dev_put(struct uwb_dev *uwb_dev) +{ + put_device(&uwb_dev->dev); +} +struct uwb_dev *uwb_dev_try_get(struct uwb_rc *rc, struct uwb_dev *uwb_dev); + +/** + * Callback function for 'uwb_{dev,rc}_foreach()'. + * + * @dev: Linux device instance + * 'uwb_dev = container_of(dev, struct uwb_dev, dev)' + * @priv: Data passed by the caller to 'uwb_{dev,rc}_foreach()'. + * + * @returns: 0 to continue the iterations, any other val to stop + * iterating and return the value to the caller of + * _foreach(). + */ +typedef int (*uwb_dev_for_each_f)(struct device *dev, void *priv); +int uwb_dev_for_each(struct uwb_rc *rc, uwb_dev_for_each_f func, void *priv); + +struct uwb_rc *uwb_rc_alloc(void); +struct uwb_rc *uwb_rc_get_by_dev(const struct uwb_dev_addr *); +struct uwb_rc *uwb_rc_get_by_grandpa(const struct device *); +void uwb_rc_put(struct uwb_rc *rc); + +typedef void (*uwb_rc_cmd_cb_f)(struct uwb_rc *rc, void *arg, + struct uwb_rceb *reply, ssize_t reply_size); + +int uwb_rc_cmd_async(struct uwb_rc *rc, const char *cmd_name, + struct uwb_rccb *cmd, size_t cmd_size, + u8 expected_type, u16 expected_event, + uwb_rc_cmd_cb_f cb, void *arg); +ssize_t uwb_rc_cmd(struct uwb_rc *rc, const char *cmd_name, + struct uwb_rccb *cmd, size_t cmd_size, + struct uwb_rceb *reply, size_t reply_size); +ssize_t uwb_rc_vcmd(struct uwb_rc *rc, const char *cmd_name, + struct uwb_rccb *cmd, size_t cmd_size, + u8 expected_type, u16 expected_event, + struct uwb_rceb **preply); +ssize_t uwb_rc_get_ie(struct uwb_rc *, struct uwb_rc_evt_get_ie **); +int uwb_bg_joined(struct uwb_rc *rc); + +size_t __uwb_addr_print(char *, size_t, const unsigned char *, int); + +int uwb_rc_dev_addr_set(struct uwb_rc *, const struct uwb_dev_addr *); +int uwb_rc_dev_addr_get(struct uwb_rc *, struct uwb_dev_addr *); +int uwb_rc_mac_addr_set(struct uwb_rc *, const struct uwb_mac_addr *); +int uwb_rc_mac_addr_get(struct uwb_rc *, struct uwb_mac_addr *); +int __uwb_mac_addr_assigned_check(struct device *, void *); +int __uwb_dev_addr_assigned_check(struct device *, void *); + +/* Print in @buf a pretty repr of @addr */ +static inline size_t uwb_dev_addr_print(char *buf, size_t buf_size, + const struct uwb_dev_addr *addr) +{ + return __uwb_addr_print(buf, buf_size, addr->data, 0); +} + +/* Print in @buf a pretty repr of @addr */ +static inline size_t uwb_mac_addr_print(char *buf, size_t buf_size, + const struct uwb_mac_addr *addr) +{ + return __uwb_addr_print(buf, buf_size, addr->data, 1); +} + +/* @returns 0 if device addresses @addr2 and @addr1 are equal */ +static inline int uwb_dev_addr_cmp(const struct uwb_dev_addr *addr1, + const struct uwb_dev_addr *addr2) +{ + return memcmp(addr1, addr2, sizeof(*addr1)); +} + +/* @returns 0 if MAC addresses @addr2 and @addr1 are equal */ +static inline int uwb_mac_addr_cmp(const struct uwb_mac_addr *addr1, + const struct uwb_mac_addr *addr2) +{ + return memcmp(addr1, addr2, sizeof(*addr1)); +} + +/* @returns !0 if a MAC @addr is a broadcast address */ +static inline int uwb_mac_addr_bcast(const struct uwb_mac_addr *addr) +{ + struct uwb_mac_addr bcast = { + .data = { 0xff, 0xff, 0xff, 0xff, 0xff, 0xff } + }; + return !uwb_mac_addr_cmp(addr, &bcast); +} + +/* @returns !0 if a MAC @addr is all zeroes*/ +static inline int uwb_mac_addr_unset(const struct uwb_mac_addr *addr) +{ + struct uwb_mac_addr unset = { + .data = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 } + }; + return !uwb_mac_addr_cmp(addr, &unset); +} + +/* @returns !0 if the address is in use. */ +static inline unsigned __uwb_dev_addr_assigned(struct uwb_rc *rc, + struct uwb_dev_addr *addr) +{ + return uwb_dev_for_each(rc, __uwb_dev_addr_assigned_check, addr); +} + +/* + * UWB Radio Controller API + * + * This API is used (in addition to the general API) to implement UWB + * Radio Controllers. + */ +void uwb_rc_init(struct uwb_rc *); +int uwb_rc_add(struct uwb_rc *, struct device *dev, void *rc_priv); +void uwb_rc_rm(struct uwb_rc *); +void uwb_rc_neh_grok(struct uwb_rc *, void *, size_t); +void uwb_rc_neh_error(struct uwb_rc *, int); +void uwb_rc_reset_all(struct uwb_rc *rc); + +/** + * uwb_rsv_is_owner - is the owner of this reservation the RC? + * @rsv: the reservation + */ +static inline bool uwb_rsv_is_owner(struct uwb_rsv *rsv) +{ + return rsv->owner == &rsv->rc->uwb_dev; +} + +/** + * Events generated by UWB that can be passed to any listeners + * + * Higher layers can register callback functions with the radio + * controller using uwb_notifs_register(). The radio controller + * maintains a list of all registered handlers and will notify all + * nodes when an event occurs. + */ +enum uwb_notifs { + UWB_NOTIF_BG_JOIN = 0, /* radio controller joined a beacon group */ + UWB_NOTIF_BG_LEAVE = 1, /* radio controller left a beacon group */ + UWB_NOTIF_ONAIR, + UWB_NOTIF_OFFAIR, +}; + +/* Callback function registered with UWB */ +struct uwb_notifs_handler { + struct list_head list_node; + void (*cb)(void *, struct uwb_dev *, enum uwb_notifs); + void *data; +}; + +int uwb_notifs_register(struct uwb_rc *, struct uwb_notifs_handler *); +int uwb_notifs_deregister(struct uwb_rc *, struct uwb_notifs_handler *); + + +/** + * UWB radio controller Event Size Entry (for creating entry tables) + * + * WUSB and WHCI define events and notifications, and they might have + * fixed or variable size. + * + * Each event/notification has a size which is not necessarily known + * in advance based on the event code. As well, vendor specific + * events/notifications will have a size impossible to determine + * unless we know about the device's specific details. + * + * It was way too smart of the spec writers not to think that it would + * be impossible for a generic driver to skip over vendor specific + * events/notifications if there are no LENGTH fields in the HEADER of + * each message...the transaction size cannot be counted on as the + * spec does not forbid to pack more than one event in a single + * transaction. + * + * Thus, we guess sizes with tables (or for events, when you know the + * size ahead of time you can use uwb_rc_neh_extra_size*()). We + * register tables with the known events and their sizes, and then we + * traverse those tables. For those with variable length, we provide a + * way to lookup the size inside the event/notification's + * payload. This allows device-specific event size tables to be + * registered. + * + * @size: Size of the payload + * + * @offset: if != 0, at offset @offset-1 starts a field with a length + * that has to be added to @size. The format of the field is + * given by @type. + * + * @type: Type and length of the offset field. Most common is LE 16 + * bits (that's why that is zero); others are there mostly to + * cover for bugs and weirdos. + */ +struct uwb_est_entry { + size_t size; + unsigned offset; + enum { UWB_EST_16 = 0, UWB_EST_8 = 1 } type; +}; + +int uwb_est_register(u8 type, u8 code_high, u16 vendor, u16 product, + const struct uwb_est_entry *, size_t entries); +int uwb_est_unregister(u8 type, u8 code_high, u16 vendor, u16 product, + const struct uwb_est_entry *, size_t entries); +ssize_t uwb_est_find_size(struct uwb_rc *rc, const struct uwb_rceb *rceb, + size_t len); + +/* -- Misc */ + +enum { + EDC_MAX_ERRORS = 10, + EDC_ERROR_TIMEFRAME = HZ, +}; + +/* error density counter */ +struct edc { + unsigned long timestart; + u16 errorcount; +}; + +static inline +void edc_init(struct edc *edc) +{ + edc->timestart = jiffies; +} + +/* Called when an error occured. + * This is way to determine if the number of acceptable errors per time + * period has been exceeded. It is not accurate as there are cases in which + * this scheme will not work, for example if there are periodic occurences + * of errors that straddle updates to the start time. This scheme is + * sufficient for our usage. + * + * @returns 1 if maximum acceptable errors per timeframe has been exceeded. + */ +static inline int edc_inc(struct edc *err_hist, u16 max_err, u16 timeframe) +{ + unsigned long now; + + now = jiffies; + if (now - err_hist->timestart > timeframe) { + err_hist->errorcount = 1; + err_hist->timestart = now; + } else if (++err_hist->errorcount > max_err) { + err_hist->errorcount = 0; + err_hist->timestart = now; + return 1; + } + return 0; +} + + +/* Information Element handling */ + +/* For representing the state of writing to a buffer when iterating */ +struct uwb_buf_ctx { + char *buf; + size_t bytes, size; +}; + +typedef int (*uwb_ie_f)(struct uwb_dev *, const struct uwb_ie_hdr *, + size_t, void *); +struct uwb_ie_hdr *uwb_ie_next(void **ptr, size_t *len); +ssize_t uwb_ie_for_each(struct uwb_dev *uwb_dev, uwb_ie_f fn, void *data, + const void *buf, size_t size); +int uwb_ie_dump_hex(struct uwb_dev *, const struct uwb_ie_hdr *, + size_t, void *); +int uwb_rc_set_ie(struct uwb_rc *, struct uwb_rc_cmd_set_ie *); +struct uwb_ie_hdr *uwb_ie_next(void **ptr, size_t *len); + + +/* + * Transmission statistics + * + * UWB uses LQI and RSSI (one byte values) for reporting radio signal + * strength and line quality indication. We do quick and dirty + * averages of those. They are signed values, btw. + * + * For 8 bit quantities, we keep the min, the max, an accumulator + * (@sigma) and a # of samples. When @samples gets to 255, we compute + * the average (@sigma / @samples), place it in @sigma and reset + * @samples to 1 (so we use it as the first sample). + * + * Now, statistically speaking, probably I am kicking the kidneys of + * some books I have in my shelves collecting dust, but I just want to + * get an approx, not the Nobel. + * + * LOCKING: there is no locking per se, but we try to keep a lockless + * schema. Only _add_samples() modifies the values--as long as you + * have other locking on top that makes sure that no two calls of + * _add_sample() happen at the same time, then we are fine. Now, for + * resetting the values we just set @samples to 0 and that makes the + * next _add_sample() to start with defaults. Reading the values in + * _show() currently can race, so you need to make sure the calls are + * under the same lock that protects calls to _add_sample(). FIXME: + * currently unlocked (It is not ultraprecise but does the trick. Bite + * me). + */ +struct stats { + s8 min, max; + s16 sigma; + atomic_t samples; +}; + +static inline +void stats_init(struct stats *stats) +{ + atomic_set(&stats->samples, 0); + wmb(); +} + +static inline +void stats_add_sample(struct stats *stats, s8 sample) +{ + s8 min, max; + s16 sigma; + unsigned samples = atomic_read(&stats->samples); + if (samples == 0) { /* it was zero before, so we initialize */ + min = 127; + max = -128; + sigma = 0; + } else { + min = stats->min; + max = stats->max; + sigma = stats->sigma; + } + + if (sample < min) /* compute new values */ + min = sample; + else if (sample > max) + max = sample; + sigma += sample; + + stats->min = min; /* commit */ + stats->max = max; + stats->sigma = sigma; + if (atomic_add_return(1, &stats->samples) > 255) { + /* wrapped around! reset */ + stats->sigma = sigma / 256; + atomic_set(&stats->samples, 1); + } +} + +static inline ssize_t stats_show(struct stats *stats, char *buf) +{ + int min, max, avg; + int samples = atomic_read(&stats->samples); + if (samples == 0) + min = max = avg = 0; + else { + min = stats->min; + max = stats->max; + avg = stats->sigma / samples; + } + return scnprintf(buf, PAGE_SIZE, "%d %d %d\n", min, max, avg); +} + +static inline ssize_t stats_store(struct stats *stats, const char *buf, + size_t size) +{ + stats_init(stats); + return size; +} + +#endif /* #ifndef __LINUX__UWB_H__ */ diff --git a/include/linux/uwb/debug-cmd.h b/include/linux/uwb/debug-cmd.h new file mode 100644 index 000000000000..1141f41bab5c --- /dev/null +++ b/include/linux/uwb/debug-cmd.h @@ -0,0 +1,57 @@ +/* + * Ultra Wide Band + * Debug interface commands + * + * Copyright (C) 2008 Cambridge Silicon Radio Ltd. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ +#ifndef __LINUX__UWB__DEBUG_CMD_H__ +#define __LINUX__UWB__DEBUG_CMD_H__ + +#include <linux/types.h> + +/* + * Debug interface commands + * + * UWB_DBG_CMD_RSV_ESTABLISH: Establish a new unicast reservation. + * + * UWB_DBG_CMD_RSV_TERMINATE: Terminate the Nth reservation. + */ + +enum uwb_dbg_cmd_type { + UWB_DBG_CMD_RSV_ESTABLISH = 1, + UWB_DBG_CMD_RSV_TERMINATE = 2, +}; + +struct uwb_dbg_cmd_rsv_establish { + __u8 target[6]; + __u8 type; + __u16 max_mas; + __u16 min_mas; + __u8 sparsity; +}; + +struct uwb_dbg_cmd_rsv_terminate { + int index; +}; + +struct uwb_dbg_cmd { + __u32 type; + union { + struct uwb_dbg_cmd_rsv_establish rsv_establish; + struct uwb_dbg_cmd_rsv_terminate rsv_terminate; + }; +}; + +#endif /* #ifndef __LINUX__UWB__DEBUG_CMD_H__ */ diff --git a/include/linux/uwb/debug.h b/include/linux/uwb/debug.h new file mode 100644 index 000000000000..a86a73fe303f --- /dev/null +++ b/include/linux/uwb/debug.h @@ -0,0 +1,82 @@ +/* + * Ultra Wide Band + * Debug Support + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: doc + * Invoke like: + * + * #define D_LOCAL 4 + * #include <linux/uwb/debug.h> + * + * At the end of your include files. + */ +#include <linux/types.h> + +struct device; +extern void dump_bytes(struct device *dev, const void *_buf, size_t rsize); + +/* Master debug switch; !0 enables, 0 disables */ +#define D_MASTER (!0) + +/* Local (per-file) debug switch; #define before #including */ +#ifndef D_LOCAL +#define D_LOCAL 0 +#endif + +#undef __d_printf +#undef d_fnstart +#undef d_fnend +#undef d_printf +#undef d_dump + +#define __d_printf(l, _tag, _dev, f, a...) \ +do { \ + struct device *__dev = (_dev); \ + if (D_MASTER && D_LOCAL >= (l)) { \ + char __head[64] = ""; \ + if (_dev != NULL) { \ + if ((unsigned long)__dev < 4096) \ + printk(KERN_ERR "E: Corrupt dev %p\n", \ + __dev); \ + else \ + snprintf(__head, sizeof(__head), \ + "%s %s: ", \ + dev_driver_string(__dev), \ + __dev->bus_id); \ + } \ + printk(KERN_ERR "%s%s" _tag ": " f, __head, \ + __func__, ## a); \ + } \ +} while (0 && _dev) + +#define d_fnstart(l, _dev, f, a...) \ + __d_printf(l, " FNSTART", _dev, f, ## a) +#define d_fnend(l, _dev, f, a...) \ + __d_printf(l, " FNEND", _dev, f, ## a) +#define d_printf(l, _dev, f, a...) \ + __d_printf(l, "", _dev, f, ## a) +#define d_dump(l, _dev, ptr, size) \ +do { \ + struct device *__dev = _dev; \ + if (D_MASTER && D_LOCAL >= (l)) \ + dump_bytes(__dev, ptr, size); \ +} while (0 && _dev) +#define d_test(l) (D_MASTER && D_LOCAL >= (l)) diff --git a/include/linux/uwb/spec.h b/include/linux/uwb/spec.h new file mode 100644 index 000000000000..198c15f8e251 --- /dev/null +++ b/include/linux/uwb/spec.h @@ -0,0 +1,727 @@ +/* + * Ultra Wide Band + * UWB Standard definitions + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * All these definitions are based on the ECMA-368 standard. + * + * Note all definitions are Little Endian in the wire, and we will + * convert them to host order before operating on the bitfields (that + * yes, we use extensively). + */ + +#ifndef __LINUX__UWB_SPEC_H__ +#define __LINUX__UWB_SPEC_H__ + +#include <linux/types.h> +#include <linux/bitmap.h> + +#define i1480_FW 0x00000303 +/* #define i1480_FW 0x00000302 */ + +/** + * Number of Medium Access Slots in a superframe. + * + * UWB divides time in SuperFrames, each one divided in 256 pieces, or + * Medium Access Slots. See MBOA MAC[5.4.5] for details. The MAS is the + * basic bandwidth allocation unit in UWB. + */ +enum { UWB_NUM_MAS = 256 }; + +/** + * Number of Zones in superframe. + * + * UWB divides the superframe into zones with numbering starting from BPST. + * See MBOA MAC[16.8.6] + */ +enum { UWB_NUM_ZONES = 16 }; + +/* + * Number of MAS in a zone. + */ +#define UWB_MAS_PER_ZONE (UWB_NUM_MAS / UWB_NUM_ZONES) + +/* + * Number of streams per DRP reservation between a pair of devices. + * + * [ECMA-368] section 16.8.6. + */ +enum { UWB_NUM_STREAMS = 8 }; + +/* + * mMasLength + * + * The length of a MAS in microseconds. + * + * [ECMA-368] section 17.16. + */ +enum { UWB_MAS_LENGTH_US = 256 }; + +/* + * mBeaconSlotLength + * + * The length of the beacon slot in microseconds. + * + * [ECMA-368] section 17.16 + */ +enum { UWB_BEACON_SLOT_LENGTH_US = 85 }; + +/* + * mMaxLostBeacons + * + * The number beacons missing in consecutive superframes before a + * device can be considered as unreachable. + * + * [ECMA-368] section 17.16 + */ +enum { UWB_MAX_LOST_BEACONS = 3 }; + +/* + * Length of a superframe in microseconds. + */ +#define UWB_SUPERFRAME_LENGTH_US (UWB_MAS_LENGTH_US * UWB_NUM_MAS) + +/** + * UWB MAC address + * + * It is *imperative* that this struct is exactly 6 packed bytes (as + * it is also used to define headers sent down and up the wire/radio). + */ +struct uwb_mac_addr { + u8 data[6]; +} __attribute__((packed)); + + +/** + * UWB device address + * + * It is *imperative* that this struct is exactly 6 packed bytes (as + * it is also used to define headers sent down and up the wire/radio). + */ +struct uwb_dev_addr { + u8 data[2]; +} __attribute__((packed)); + + +/** + * Types of UWB addresses + * + * Order matters (by size). + */ +enum uwb_addr_type { + UWB_ADDR_DEV = 0, + UWB_ADDR_MAC = 1, +}; + + +/** Size of a char buffer for printing a MAC/device address */ +enum { UWB_ADDR_STRSIZE = 32 }; + + +/** UWB WiMedia protocol IDs. */ +enum uwb_prid { + UWB_PRID_WLP_RESERVED = 0x0000, + UWB_PRID_WLP = 0x0001, + UWB_PRID_WUSB_BOT = 0x0010, + UWB_PRID_WUSB = 0x0010, + UWB_PRID_WUSB_TOP = 0x001F, +}; + + +/** PHY Rate (MBOA MAC[7.8.12, Table 61]) */ +enum uwb_phy_rate { + UWB_PHY_RATE_53 = 0, + UWB_PHY_RATE_80, + UWB_PHY_RATE_106, + UWB_PHY_RATE_160, + UWB_PHY_RATE_200, + UWB_PHY_RATE_320, + UWB_PHY_RATE_400, + UWB_PHY_RATE_480, + UWB_PHY_RATE_INVALID +}; + + +/** + * Different ways to scan (MBOA MAC[6.2.2, Table 8], WUSB[Table 8-78]) + */ +enum uwb_scan_type { + UWB_SCAN_ONLY = 0, + UWB_SCAN_OUTSIDE_BP, + UWB_SCAN_WHILE_INACTIVE, + UWB_SCAN_DISABLED, + UWB_SCAN_ONLY_STARTTIME, + UWB_SCAN_TOP +}; + + +/** ACK Policy types (MBOA MAC[7.2.1.3]) */ +enum uwb_ack_pol { + UWB_ACK_NO = 0, + UWB_ACK_INM = 1, + UWB_ACK_B = 2, + UWB_ACK_B_REQ = 3, +}; + + +/** DRP reservation types ([ECMA-368 table 106) */ +enum uwb_drp_type { + UWB_DRP_TYPE_ALIEN_BP = 0, + UWB_DRP_TYPE_HARD, + UWB_DRP_TYPE_SOFT, + UWB_DRP_TYPE_PRIVATE, + UWB_DRP_TYPE_PCA, +}; + + +/** DRP Reason Codes ([ECMA-368] table 107) */ +enum uwb_drp_reason { + UWB_DRP_REASON_ACCEPTED = 0, + UWB_DRP_REASON_CONFLICT, + UWB_DRP_REASON_PENDING, + UWB_DRP_REASON_DENIED, + UWB_DRP_REASON_MODIFIED, +}; + +/** + * DRP Notification Reason Codes (WHCI 0.95 [3.1.4.9]) + */ +enum uwb_drp_notif_reason { + UWB_DRP_NOTIF_DRP_IE_RCVD = 0, + UWB_DRP_NOTIF_CONFLICT, + UWB_DRP_NOTIF_TERMINATE, +}; + + +/** Allocation of MAS slots in a DRP request MBOA MAC[7.8.7] */ +struct uwb_drp_alloc { + __le16 zone_bm; + __le16 mas_bm; +} __attribute__((packed)); + + +/** General MAC Header format (ECMA-368[16.2]) */ +struct uwb_mac_frame_hdr { + __le16 Frame_Control; + struct uwb_dev_addr DestAddr; + struct uwb_dev_addr SrcAddr; + __le16 Sequence_Control; + __le16 Access_Information; +} __attribute__((packed)); + + +/** + * uwb_beacon_frame - a beacon frame including MAC headers + * + * [ECMA] section 16.3. + */ +struct uwb_beacon_frame { + struct uwb_mac_frame_hdr hdr; + struct uwb_mac_addr Device_Identifier; /* may be a NULL EUI-48 */ + u8 Beacon_Slot_Number; + u8 Device_Control; + u8 IEData[]; +} __attribute__((packed)); + + +/** Information Element codes (MBOA MAC[T54]) */ +enum uwb_ie { + UWB_PCA_AVAILABILITY = 2, + UWB_IE_DRP_AVAILABILITY = 8, + UWB_IE_DRP = 9, + UWB_BP_SWITCH_IE = 11, + UWB_MAC_CAPABILITIES_IE = 12, + UWB_PHY_CAPABILITIES_IE = 13, + UWB_APP_SPEC_PROBE_IE = 15, + UWB_IDENTIFICATION_IE = 19, + UWB_MASTER_KEY_ID_IE = 20, + UWB_IE_WLP = 250, /* WiMedia Logical Link Control Protocol WLP 0.99 */ + UWB_APP_SPEC_IE = 255, +}; + + +/** + * Header common to all Information Elements (IEs) + */ +struct uwb_ie_hdr { + u8 element_id; /* enum uwb_ie */ + u8 length; +} __attribute__((packed)); + + +/** Dynamic Reservation Protocol IE (MBOA MAC[7.8.6]) */ +struct uwb_ie_drp { + struct uwb_ie_hdr hdr; + __le16 drp_control; + struct uwb_dev_addr dev_addr; + struct uwb_drp_alloc allocs[]; +} __attribute__((packed)); + +static inline int uwb_ie_drp_type(struct uwb_ie_drp *ie) +{ + return (le16_to_cpu(ie->drp_control) >> 0) & 0x7; +} + +static inline int uwb_ie_drp_stream_index(struct uwb_ie_drp *ie) +{ + return (le16_to_cpu(ie->drp_control) >> 3) & 0x7; +} + +static inline int uwb_ie_drp_reason_code(struct uwb_ie_drp *ie) +{ + return (le16_to_cpu(ie->drp_control) >> 6) & 0x7; +} + +static inline int uwb_ie_drp_status(struct uwb_ie_drp *ie) +{ + return (le16_to_cpu(ie->drp_control) >> 9) & 0x1; +} + +static inline int uwb_ie_drp_owner(struct uwb_ie_drp *ie) +{ + return (le16_to_cpu(ie->drp_control) >> 10) & 0x1; +} + +static inline int uwb_ie_drp_tiebreaker(struct uwb_ie_drp *ie) +{ + return (le16_to_cpu(ie->drp_control) >> 11) & 0x1; +} + +static inline int uwb_ie_drp_unsafe(struct uwb_ie_drp *ie) +{ + return (le16_to_cpu(ie->drp_control) >> 12) & 0x1; +} + +static inline void uwb_ie_drp_set_type(struct uwb_ie_drp *ie, enum uwb_drp_type type) +{ + u16 drp_control = le16_to_cpu(ie->drp_control); + drp_control = (drp_control & ~(0x7 << 0)) | (type << 0); + ie->drp_control = cpu_to_le16(drp_control); +} + +static inline void uwb_ie_drp_set_stream_index(struct uwb_ie_drp *ie, int stream_index) +{ + u16 drp_control = le16_to_cpu(ie->drp_control); + drp_control = (drp_control & ~(0x7 << 3)) | (stream_index << 3); + ie->drp_control = cpu_to_le16(drp_control); +} + +static inline void uwb_ie_drp_set_reason_code(struct uwb_ie_drp *ie, + enum uwb_drp_reason reason_code) +{ + u16 drp_control = le16_to_cpu(ie->drp_control); + drp_control = (ie->drp_control & ~(0x7 << 6)) | (reason_code << 6); + ie->drp_control = cpu_to_le16(drp_control); +} + +static inline void uwb_ie_drp_set_status(struct uwb_ie_drp *ie, int status) +{ + u16 drp_control = le16_to_cpu(ie->drp_control); + drp_control = (drp_control & ~(0x1 << 9)) | (status << 9); + ie->drp_control = cpu_to_le16(drp_control); +} + +static inline void uwb_ie_drp_set_owner(struct uwb_ie_drp *ie, int owner) +{ + u16 drp_control = le16_to_cpu(ie->drp_control); + drp_control = (drp_control & ~(0x1 << 10)) | (owner << 10); + ie->drp_control = cpu_to_le16(drp_control); +} + +static inline void uwb_ie_drp_set_tiebreaker(struct uwb_ie_drp *ie, int tiebreaker) +{ + u16 drp_control = le16_to_cpu(ie->drp_control); + drp_control = (drp_control & ~(0x1 << 11)) | (tiebreaker << 11); + ie->drp_control = cpu_to_le16(drp_control); +} + +static inline void uwb_ie_drp_set_unsafe(struct uwb_ie_drp *ie, int unsafe) +{ + u16 drp_control = le16_to_cpu(ie->drp_control); + drp_control = (drp_control & ~(0x1 << 12)) | (unsafe << 12); + ie->drp_control = cpu_to_le16(drp_control); +} + +/** Dynamic Reservation Protocol IE (MBOA MAC[7.8.7]) */ +struct uwb_ie_drp_avail { + struct uwb_ie_hdr hdr; + DECLARE_BITMAP(bmp, UWB_NUM_MAS); +} __attribute__((packed)); + +/** + * The Vendor ID is set to an OUI that indicates the vendor of the device. + * ECMA-368 [16.8.10] + */ +struct uwb_vendor_id { + u8 data[3]; +} __attribute__((packed)); + +/** + * The device type ID + * FIXME: clarify what this means + * ECMA-368 [16.8.10] + */ +struct uwb_device_type_id { + u8 data[3]; +} __attribute__((packed)); + + +/** + * UWB device information types + * ECMA-368 [16.8.10] + */ +enum uwb_dev_info_type { + UWB_DEV_INFO_VENDOR_ID = 0, + UWB_DEV_INFO_VENDOR_TYPE, + UWB_DEV_INFO_NAME, +}; + +/** + * UWB device information found in Identification IE + * ECMA-368 [16.8.10] + */ +struct uwb_dev_info { + u8 type; /* enum uwb_dev_info_type */ + u8 length; + u8 data[]; +} __attribute__((packed)); + +/** + * UWB Identification IE + * ECMA-368 [16.8.10] + */ +struct uwb_identification_ie { + struct uwb_ie_hdr hdr; + struct uwb_dev_info info[]; +} __attribute__((packed)); + +/* + * UWB Radio Controller + * + * These definitions are common to the Radio Control layers as + * exported by the WUSB1.0 HWA and WHCI interfaces. + */ + +/** Radio Control Command Block (WUSB1.0[Table 8-65] and WHCI 0.95) */ +struct uwb_rccb { + u8 bCommandType; /* enum hwa_cet */ + __le16 wCommand; /* Command code */ + u8 bCommandContext; /* Context ID */ +} __attribute__((packed)); + + +/** Radio Control Event Block (WUSB[table 8-66], WHCI 0.95) */ +struct uwb_rceb { + u8 bEventType; /* enum hwa_cet */ + __le16 wEvent; /* Event code */ + u8 bEventContext; /* Context ID */ +} __attribute__((packed)); + + +enum { + UWB_RC_CET_GENERAL = 0, /* General Command/Event type */ + UWB_RC_CET_EX_TYPE_1 = 1, /* Extended Type 1 Command/Event type */ +}; + +/* Commands to the radio controller */ +enum uwb_rc_cmd { + UWB_RC_CMD_CHANNEL_CHANGE = 16, + UWB_RC_CMD_DEV_ADDR_MGMT = 17, /* Device Address Management */ + UWB_RC_CMD_GET_IE = 18, /* GET Information Elements */ + UWB_RC_CMD_RESET = 19, + UWB_RC_CMD_SCAN = 20, /* Scan management */ + UWB_RC_CMD_SET_BEACON_FILTER = 21, + UWB_RC_CMD_SET_DRP_IE = 22, /* Dynamic Reservation Protocol IEs */ + UWB_RC_CMD_SET_IE = 23, /* Information Element management */ + UWB_RC_CMD_SET_NOTIFICATION_FILTER = 24, + UWB_RC_CMD_SET_TX_POWER = 25, + UWB_RC_CMD_SLEEP = 26, + UWB_RC_CMD_START_BEACON = 27, + UWB_RC_CMD_STOP_BEACON = 28, + UWB_RC_CMD_BP_MERGE = 29, + UWB_RC_CMD_SEND_COMMAND_FRAME = 30, + UWB_RC_CMD_SET_ASIE_NOTIF = 31, +}; + +/* Notifications from the radio controller */ +enum uwb_rc_evt { + UWB_RC_EVT_IE_RCV = 0, + UWB_RC_EVT_BEACON = 1, + UWB_RC_EVT_BEACON_SIZE = 2, + UWB_RC_EVT_BPOIE_CHANGE = 3, + UWB_RC_EVT_BP_SLOT_CHANGE = 4, + UWB_RC_EVT_BP_SWITCH_IE_RCV = 5, + UWB_RC_EVT_DEV_ADDR_CONFLICT = 6, + UWB_RC_EVT_DRP_AVAIL = 7, + UWB_RC_EVT_DRP = 8, + UWB_RC_EVT_BP_SWITCH_STATUS = 9, + UWB_RC_EVT_CMD_FRAME_RCV = 10, + UWB_RC_EVT_CHANNEL_CHANGE_IE_RCV = 11, + /* Events (command responses) use the same code as the command */ + UWB_RC_EVT_UNKNOWN_CMD_RCV = 65535, +}; + +enum uwb_rc_extended_type_1_cmd { + UWB_RC_SET_DAA_ENERGY_MASK = 32, + UWB_RC_SET_NOTIFICATION_FILTER_EX = 33, +}; + +enum uwb_rc_extended_type_1_evt { + UWB_RC_DAA_ENERGY_DETECTED = 0, +}; + +/* Radio Control Result Code. [WHCI] table 3-3. */ +enum { + UWB_RC_RES_SUCCESS = 0, + UWB_RC_RES_FAIL, + UWB_RC_RES_FAIL_HARDWARE, + UWB_RC_RES_FAIL_NO_SLOTS, + UWB_RC_RES_FAIL_BEACON_TOO_LARGE, + UWB_RC_RES_FAIL_INVALID_PARAMETER, + UWB_RC_RES_FAIL_UNSUPPORTED_PWR_LEVEL, + UWB_RC_RES_FAIL_INVALID_IE_DATA, + UWB_RC_RES_FAIL_BEACON_SIZE_EXCEEDED, + UWB_RC_RES_FAIL_CANCELLED, + UWB_RC_RES_FAIL_INVALID_STATE, + UWB_RC_RES_FAIL_INVALID_SIZE, + UWB_RC_RES_FAIL_ACK_NOT_RECEIVED, + UWB_RC_RES_FAIL_NO_MORE_ASIE_NOTIF, + UWB_RC_RES_FAIL_TIME_OUT = 255, +}; + +/* Confirm event. [WHCI] section 3.1.3.1 etc. */ +struct uwb_rc_evt_confirm { + struct uwb_rceb rceb; + u8 bResultCode; +} __attribute__((packed)); + +/* Device Address Management event. [WHCI] section 3.1.3.2. */ +struct uwb_rc_evt_dev_addr_mgmt { + struct uwb_rceb rceb; + u8 baAddr[6]; + u8 bResultCode; +} __attribute__((packed)); + + +/* Get IE Event. [WHCI] section 3.1.3.3. */ +struct uwb_rc_evt_get_ie { + struct uwb_rceb rceb; + __le16 wIELength; + u8 IEData[]; +} __attribute__((packed)); + +/* Set DRP IE Event. [WHCI] section 3.1.3.7. */ +struct uwb_rc_evt_set_drp_ie { + struct uwb_rceb rceb; + __le16 wRemainingSpace; + u8 bResultCode; +} __attribute__((packed)); + +/* Set IE Event. [WHCI] section 3.1.3.8. */ +struct uwb_rc_evt_set_ie { + struct uwb_rceb rceb; + __le16 RemainingSpace; + u8 bResultCode; +} __attribute__((packed)); + +/* Scan command. [WHCI] 3.1.3.5. */ +struct uwb_rc_cmd_scan { + struct uwb_rccb rccb; + u8 bChannelNumber; + u8 bScanState; + __le16 wStartTime; +} __attribute__((packed)); + +/* Set DRP IE command. [WHCI] section 3.1.3.7. */ +struct uwb_rc_cmd_set_drp_ie { + struct uwb_rccb rccb; + __le16 wIELength; + struct uwb_ie_drp IEData[]; +} __attribute__((packed)); + +/* Set IE command. [WHCI] section 3.1.3.8. */ +struct uwb_rc_cmd_set_ie { + struct uwb_rccb rccb; + __le16 wIELength; + u8 IEData[]; +} __attribute__((packed)); + +/* Set DAA Energy Mask event. [WHCI 0.96] section 3.1.3.17. */ +struct uwb_rc_evt_set_daa_energy_mask { + struct uwb_rceb rceb; + __le16 wLength; + u8 result; +} __attribute__((packed)); + +/* Set Notification Filter Extended event. [WHCI 0.96] section 3.1.3.18. */ +struct uwb_rc_evt_set_notification_filter_ex { + struct uwb_rceb rceb; + __le16 wLength; + u8 result; +} __attribute__((packed)); + +/* IE Received notification. [WHCI] section 3.1.4.1. */ +struct uwb_rc_evt_ie_rcv { + struct uwb_rceb rceb; + struct uwb_dev_addr SrcAddr; + __le16 wIELength; + u8 IEData[]; +} __attribute__((packed)); + +/* Type of the received beacon. [WHCI] section 3.1.4.2. */ +enum uwb_rc_beacon_type { + UWB_RC_BEACON_TYPE_SCAN = 0, + UWB_RC_BEACON_TYPE_NEIGHBOR, + UWB_RC_BEACON_TYPE_OL_ALIEN, + UWB_RC_BEACON_TYPE_NOL_ALIEN, +}; + +/* Beacon received notification. [WHCI] 3.1.4.2. */ +struct uwb_rc_evt_beacon { + struct uwb_rceb rceb; + u8 bChannelNumber; + u8 bBeaconType; + __le16 wBPSTOffset; + u8 bLQI; + u8 bRSSI; + __le16 wBeaconInfoLength; + u8 BeaconInfo[]; +} __attribute__((packed)); + + +/* Beacon Size Change notification. [WHCI] section 3.1.4.3 */ +struct uwb_rc_evt_beacon_size { + struct uwb_rceb rceb; + __le16 wNewBeaconSize; +} __attribute__((packed)); + + +/* BPOIE Change notification. [WHCI] section 3.1.4.4. */ +struct uwb_rc_evt_bpoie_change { + struct uwb_rceb rceb; + __le16 wBPOIELength; + u8 BPOIE[]; +} __attribute__((packed)); + + +/* Beacon Slot Change notification. [WHCI] section 3.1.4.5. */ +struct uwb_rc_evt_bp_slot_change { + struct uwb_rceb rceb; + u8 slot_info; +} __attribute__((packed)); + +static inline int uwb_rc_evt_bp_slot_change_slot_num( + const struct uwb_rc_evt_bp_slot_change *evt) +{ + return evt->slot_info & 0x7f; +} + +static inline int uwb_rc_evt_bp_slot_change_no_slot( + const struct uwb_rc_evt_bp_slot_change *evt) +{ + return (evt->slot_info & 0x80) >> 7; +} + +/* BP Switch IE Received notification. [WHCI] section 3.1.4.6. */ +struct uwb_rc_evt_bp_switch_ie_rcv { + struct uwb_rceb rceb; + struct uwb_dev_addr wSrcAddr; + __le16 wIELength; + u8 IEData[]; +} __attribute__((packed)); + +/* DevAddr Conflict notification. [WHCI] section 3.1.4.7. */ +struct uwb_rc_evt_dev_addr_conflict { + struct uwb_rceb rceb; +} __attribute__((packed)); + +/* DRP notification. [WHCI] section 3.1.4.9. */ +struct uwb_rc_evt_drp { + struct uwb_rceb rceb; + struct uwb_dev_addr src_addr; + u8 reason; + u8 beacon_slot_number; + __le16 ie_length; + u8 ie_data[]; +} __attribute__((packed)); + +static inline enum uwb_drp_notif_reason uwb_rc_evt_drp_reason(struct uwb_rc_evt_drp *evt) +{ + return evt->reason & 0x0f; +} + + +/* DRP Availability Change notification. [WHCI] section 3.1.4.8. */ +struct uwb_rc_evt_drp_avail { + struct uwb_rceb rceb; + DECLARE_BITMAP(bmp, UWB_NUM_MAS); +} __attribute__((packed)); + +/* BP switch status notification. [WHCI] section 3.1.4.10. */ +struct uwb_rc_evt_bp_switch_status { + struct uwb_rceb rceb; + u8 status; + u8 slot_offset; + __le16 bpst_offset; + u8 move_countdown; +} __attribute__((packed)); + +/* Command Frame Received notification. [WHCI] section 3.1.4.11. */ +struct uwb_rc_evt_cmd_frame_rcv { + struct uwb_rceb rceb; + __le16 receive_time; + struct uwb_dev_addr wSrcAddr; + struct uwb_dev_addr wDstAddr; + __le16 control; + __le16 reserved; + __le16 dataLength; + u8 data[]; +} __attribute__((packed)); + +/* Channel Change IE Received notification. [WHCI] section 3.1.4.12. */ +struct uwb_rc_evt_channel_change_ie_rcv { + struct uwb_rceb rceb; + struct uwb_dev_addr wSrcAddr; + __le16 wIELength; + u8 IEData[]; +} __attribute__((packed)); + +/* DAA Energy Detected notification. [WHCI 0.96] section 3.1.4.14. */ +struct uwb_rc_evt_daa_energy_detected { + struct uwb_rceb rceb; + __le16 wLength; + u8 bandID; + u8 reserved; + u8 toneBmp[16]; +} __attribute__((packed)); + + +/** + * Radio Control Interface Class Descriptor + * + * WUSB 1.0 [8.6.1.2] + */ +struct uwb_rc_control_intf_class_desc { + u8 bLength; + u8 bDescriptorType; + __le16 bcdRCIVersion; +} __attribute__((packed)); + +#endif /* #ifndef __LINUX__UWB_SPEC_H__ */ diff --git a/include/linux/uwb/umc.h b/include/linux/uwb/umc.h new file mode 100644 index 000000000000..36a39e34f8d7 --- /dev/null +++ b/include/linux/uwb/umc.h @@ -0,0 +1,194 @@ +/* + * UWB Multi-interface Controller support. + * + * Copyright (C) 2007 Cambridge Silicon Radio Ltd. + * + * This file is released under the GPLv2 + * + * UMC (UWB Multi-interface Controller) capabilities (e.g., radio + * controller, host controller) are presented as devices on the "umc" + * bus. + * + * The radio controller is not strictly a UMC capability but it's + * useful to present it as such. + * + * References: + * + * [WHCI] Wireless Host Controller Interface Specification for + * Certified Wireless Universal Serial Bus, revision 0.95. + * + * How this works is kind of convoluted but simple. The whci.ko driver + * loads when WHCI devices are detected. These WHCI devices expose + * many devices in the same PCI function (they couldn't have reused + * functions, no), so for each PCI function that exposes these many + * devices, whci ceates a umc_dev [whci_probe() -> whci_add_cap()] + * with umc_device_create() and adds it to the bus with + * umc_device_register(). + * + * umc_device_register() calls device_register() which will push the + * bus management code to load your UMC driver's somehting_probe() + * that you have registered for that capability code. + * + * Now when the WHCI device is removed, whci_remove() will go over + * each umc_dev assigned to each of the PCI function's capabilities + * and through whci_del_cap() call umc_device_unregister() each + * created umc_dev. Of course, if you are bound to the device, your + * driver's something_remove() will be called. + */ + +#ifndef _LINUX_UWB_UMC_H_ +#define _LINUX_UWB_UMC_H_ + +#include <linux/device.h> +#include <linux/pci.h> + +/* + * UMC capability IDs. + * + * 0x00 is reserved so use it for the radio controller device. + * + * [WHCI] table 2-8 + */ +#define UMC_CAP_ID_WHCI_RC 0x00 /* radio controller */ +#define UMC_CAP_ID_WHCI_WUSB_HC 0x01 /* WUSB host controller */ + +/** + * struct umc_dev - UMC capability device + * + * @version: version of the specification this capability conforms to. + * @cap_id: capability ID. + * @bar: PCI Bar (64 bit) where the resource lies + * @resource: register space resource. + * @irq: interrupt line. + */ +struct umc_dev { + u16 version; + u8 cap_id; + u8 bar; + struct resource resource; + unsigned irq; + struct device dev; +}; + +#define to_umc_dev(d) container_of(d, struct umc_dev, dev) + +/** + * struct umc_driver - UMC capability driver + * @cap_id: supported capability ID. + * @match: driver specific capability matching function. + * @match_data: driver specific data for match() (e.g., a + * table of pci_device_id's if umc_match_pci_id() is used). + */ +struct umc_driver { + char *name; + u8 cap_id; + int (*match)(struct umc_driver *, struct umc_dev *); + const void *match_data; + + int (*probe)(struct umc_dev *); + void (*remove)(struct umc_dev *); + int (*suspend)(struct umc_dev *, pm_message_t state); + int (*resume)(struct umc_dev *); + + struct device_driver driver; +}; + +#define to_umc_driver(d) container_of(d, struct umc_driver, driver) + +extern struct bus_type umc_bus_type; + +struct umc_dev *umc_device_create(struct device *parent, int n); +int __must_check umc_device_register(struct umc_dev *umc); +void umc_device_unregister(struct umc_dev *umc); + +int __must_check __umc_driver_register(struct umc_driver *umc_drv, + struct module *mod, + const char *mod_name); + +/** + * umc_driver_register - register a UMC capabiltity driver. + * @umc_drv: pointer to the driver. + */ +static inline int __must_check umc_driver_register(struct umc_driver *umc_drv) +{ + return __umc_driver_register(umc_drv, THIS_MODULE, KBUILD_MODNAME); +} +void umc_driver_unregister(struct umc_driver *umc_drv); + +/* + * Utility function you can use to match (umc_driver->match) against a + * null-terminated array of 'struct pci_device_id' in + * umc_driver->match_data. + */ +int umc_match_pci_id(struct umc_driver *umc_drv, struct umc_dev *umc); + +/** + * umc_parent_pci_dev - return the UMC's parent PCI device or NULL if none + * @umc_dev: UMC device whose parent PCI device we are looking for + * + * DIRTY!!! DON'T RELY ON THIS + * + * FIXME: This is as dirty as it gets, but we need some way to check + * the correct type of umc_dev->parent (so that for example, we can + * cast to pci_dev). Casting to pci_dev is necesary because at some + * point we need to request resources from the device. Mapping is + * easily over come (ioremap and stuff are bus agnostic), but hooking + * up to some error handlers (such as pci error handlers) might need + * this. + * + * THIS might (probably will) be removed in the future, so don't count + * on it. + */ +static inline struct pci_dev *umc_parent_pci_dev(struct umc_dev *umc_dev) +{ + struct pci_dev *pci_dev = NULL; + if (umc_dev->dev.parent->bus == &pci_bus_type) + pci_dev = to_pci_dev(umc_dev->dev.parent); + return pci_dev; +} + +/** + * umc_dev_get() - reference a UMC device. + * @umc_dev: Pointer to UMC device. + * + * NOTE: we are assuming in this whole scheme that the parent device + * is referenced at _probe() time and unreferenced at _remove() + * time by the parent's subsystem. + */ +static inline struct umc_dev *umc_dev_get(struct umc_dev *umc_dev) +{ + get_device(&umc_dev->dev); + return umc_dev; +} + +/** + * umc_dev_put() - unreference a UMC device. + * @umc_dev: Pointer to UMC device. + */ +static inline void umc_dev_put(struct umc_dev *umc_dev) +{ + put_device(&umc_dev->dev); +} + +/** + * umc_set_drvdata - set UMC device's driver data. + * @umc_dev: Pointer to UMC device. + * @data: Data to set. + */ +static inline void umc_set_drvdata(struct umc_dev *umc_dev, void *data) +{ + dev_set_drvdata(&umc_dev->dev, data); +} + +/** + * umc_get_drvdata - recover UMC device's driver data. + * @umc_dev: Pointer to UMC device. + */ +static inline void *umc_get_drvdata(struct umc_dev *umc_dev) +{ + return dev_get_drvdata(&umc_dev->dev); +} + +int umc_controller_reset(struct umc_dev *umc); + +#endif /* #ifndef _LINUX_UWB_UMC_H_ */ diff --git a/include/linux/uwb/whci.h b/include/linux/uwb/whci.h new file mode 100644 index 000000000000..915ec23042d4 --- /dev/null +++ b/include/linux/uwb/whci.h @@ -0,0 +1,117 @@ +/* + * Wireless Host Controller Interface for Ultra-Wide-Band and Wireless USB + * + * Copyright (C) 2005-2006 Intel Corporation + * Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * + * References: + * [WHCI] Wireless Host Controller Interface Specification for + * Certified Wireless Universal Serial Bus, revision 0.95. + */ +#ifndef _LINUX_UWB_WHCI_H_ +#define _LINUX_UWB_WHCI_H_ + +#include <linux/pci.h> + +/* + * UWB interface capability registers (offsets from UWBBASE) + * + * [WHCI] section 2.2 + */ +#define UWBCAPINFO 0x00 /* == UWBCAPDATA(0) */ +# define UWBCAPINFO_TO_N_CAPS(c) (((c) >> 0) & 0xFull) +#define UWBCAPDATA(n) (8*(n)) +# define UWBCAPDATA_TO_VERSION(c) (((c) >> 32) & 0xFFFFull) +# define UWBCAPDATA_TO_OFFSET(c) (((c) >> 18) & 0x3FFFull) +# define UWBCAPDATA_TO_BAR(c) (((c) >> 16) & 0x3ull) +# define UWBCAPDATA_TO_SIZE(c) ((((c) >> 8) & 0xFFull) * sizeof(u32)) +# define UWBCAPDATA_TO_CAP_ID(c) (((c) >> 0) & 0xFFull) + +/* Size of the WHCI capability data (including the RC capability) for + a device with n capabilities. */ +#define UWBCAPDATA_SIZE(n) (8 + 8*(n)) + + +/* + * URC registers (offsets from URCBASE) + * + * [WHCI] section 2.3 + */ +#define URCCMD 0x00 +# define URCCMD_RESET (1 << 31) /* UMC Hardware reset */ +# define URCCMD_RS (1 << 30) /* Run/Stop */ +# define URCCMD_EARV (1 << 29) /* Event Address Register Valid */ +# define URCCMD_ACTIVE (1 << 15) /* Command is active */ +# define URCCMD_IWR (1 << 14) /* Interrupt When Ready */ +# define URCCMD_SIZE_MASK 0x00000fff /* Command size mask */ +#define URCSTS 0x04 +# define URCSTS_EPS (1 << 17) /* Event Processing Status */ +# define URCSTS_HALTED (1 << 16) /* RC halted */ +# define URCSTS_HSE (1 << 10) /* Host System Error...fried */ +# define URCSTS_ER (1 << 9) /* Event Ready */ +# define URCSTS_RCI (1 << 8) /* Ready for Command Interrupt */ +# define URCSTS_INT_MASK 0x00000700 /* URC interrupt sources */ +# define URCSTS_ISI 0x000000ff /* Interrupt Source Identification */ +#define URCINTR 0x08 +# define URCINTR_EN_ALL 0x000007ff /* Enable all interrupt sources */ +#define URCCMDADDR 0x10 +#define URCEVTADDR 0x18 +# define URCEVTADDR_OFFSET_MASK 0xfff /* Event pointer offset mask */ + + +/** Write 32 bit @value to little endian register at @addr */ +static inline +void le_writel(u32 value, void __iomem *addr) +{ + iowrite32(value, addr); +} + + +/** Read from 32 bit little endian register at @addr */ +static inline +u32 le_readl(void __iomem *addr) +{ + return ioread32(addr); +} + + +/** Write 64 bit @value to little endian register at @addr */ +static inline +void le_writeq(u64 value, void __iomem *addr) +{ + iowrite32(value, addr); + iowrite32(value >> 32, addr + 4); +} + + +/** Read from 64 bit little endian register at @addr */ +static inline +u64 le_readq(void __iomem *addr) +{ + u64 value; + value = ioread32(addr); + value |= (u64)ioread32(addr + 4) << 32; + return value; +} + +extern int whci_wait_for(struct device *dev, u32 __iomem *reg, + u32 mask, u32 result, + unsigned long max_ms, const char *tag); + +#endif /* #ifndef _LINUX_UWB_WHCI_H_ */ diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index d4b03034ee73..4669d7e72e75 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -315,6 +315,13 @@ struct v4l2_pix_format { /* see http://www.siliconimaging.com/RGB%20Bayer.htm */ #define V4L2_PIX_FMT_SBGGR8 v4l2_fourcc('B', 'A', '8', '1') /* 8 BGBG.. GRGR.. */ #define V4L2_PIX_FMT_SGBRG8 v4l2_fourcc('G', 'B', 'R', 'G') /* 8 GBGB.. RGRG.. */ +/* + * 10bit raw bayer, expanded to 16 bits + * xxxxrrrrrrrrrrxxxxgggggggggg xxxxggggggggggxxxxbbbbbbbbbb... + */ +#define V4L2_PIX_FMT_SGRBG10 v4l2_fourcc('B', 'A', '1', '0') +/* 10bit raw bayer DPCM compressed to 8 bits */ +#define V4L2_PIX_FMT_SGRBG10DPCM8 v4l2_fourcc('B', 'D', '1', '0') #define V4L2_PIX_FMT_SBGGR16 v4l2_fourcc('B', 'Y', 'R', '2') /* 16 BGBG.. GRGR.. */ /* compressed formats */ diff --git a/include/linux/wlp.h b/include/linux/wlp.h new file mode 100644 index 000000000000..033545e145c7 --- /dev/null +++ b/include/linux/wlp.h @@ -0,0 +1,735 @@ +/* + * WiMedia Logical Link Control Protocol (WLP) + * + * Copyright (C) 2005-2006 Intel Corporation + * Reinette Chatre <reinette.chatre@intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + * + * FIXME: docs + * + * - Does not (yet) include support for WLP control frames + * WLP Draft 0.99 [6.5]. + * + * A visual representation of the data structures. + * + * wssidB wssidB + * ^ ^ + * | | + * wssidA wssidA + * wlp interface { ^ ^ + * ... | | + * ... ... wssid wssid ... + * wlp --- ... | | + * }; neighbors --> neighbA --> neighbB + * ... + * wss + * ... + * eda cache --> neighborA --> neighborB --> neighborC ... + */ + +#ifndef __LINUX__WLP_H_ +#define __LINUX__WLP_H_ + +#include <linux/netdevice.h> +#include <linux/skbuff.h> +#include <linux/list.h> +#include <linux/uwb.h> + +/** + * WLP Protocol ID + * WLP Draft 0.99 [6.2] + * + * The MUX header for all WLP frames + */ +#define WLP_PROTOCOL_ID 0x0100 + +/** + * WLP Version + * WLP version placed in the association frames (WLP 0.99 [6.6]) + */ +#define WLP_VERSION 0x10 + +/** + * Bytes needed to print UUID as string + */ +#define WLP_WSS_UUID_STRSIZE 48 + +/** + * Bytes needed to print nonce as string + */ +#define WLP_WSS_NONCE_STRSIZE 48 + + +/** + * Size used for WLP name size + * + * The WSS name is set to 65 bytes, 1 byte larger than the maximum + * allowed by the WLP spec. This is to have a null terminated string + * for display to the user. A maximum of 64 bytes will still be used + * when placing the WSS name field in association frames. + */ +#define WLP_WSS_NAME_SIZE 65 + +/** + * Number of bytes added by WLP to data frame + * + * A data frame transmitted from a host will be placed in a Standard or + * Abbreviated WLP frame. These have an extra 4 bytes of header (struct + * wlp_frame_std_abbrv_hdr). + * When the stack sends this data frame for transmission it needs to ensure + * there is enough headroom for this header. + */ +#define WLP_DATA_HLEN 4 + +/** + * State of device regarding WLP Service Set + * + * WLP_WSS_STATE_NONE: the host does not participate in any WSS + * WLP_WSS_STATE_PART_ENROLLED: used as part of the enrollment sequence + * ("Partial Enroll"). This state is used to + * indicate the first part of enrollment that is + * unsecure. If the WSS is unsecure then the + * state will promptly go to WLP_WSS_STATE_ENROLLED, + * if the WSS is not secure then the enrollment + * procedure is a few more steps before we are + * enrolled. + * WLP_WSS_STATE_ENROLLED: the host is enrolled in a WSS + * WLP_WSS_STATE_ACTIVE: WSS is activated + * WLP_WSS_STATE_CONNECTED: host is connected to neighbor in WSS + * + */ +enum wlp_wss_state { + WLP_WSS_STATE_NONE = 0, + WLP_WSS_STATE_PART_ENROLLED, + WLP_WSS_STATE_ENROLLED, + WLP_WSS_STATE_ACTIVE, + WLP_WSS_STATE_CONNECTED, +}; + +/** + * WSS Secure status + * WLP 0.99 Table 6 + * + * Set to one if the WSS is secure, zero if it is not secure + */ +enum wlp_wss_sec_status { + WLP_WSS_UNSECURE = 0, + WLP_WSS_SECURE, +}; + +/** + * WLP frame type + * WLP Draft 0.99 [6.2 Table 1] + */ +enum wlp_frame_type { + WLP_FRAME_STANDARD = 0, + WLP_FRAME_ABBREVIATED, + WLP_FRAME_CONTROL, + WLP_FRAME_ASSOCIATION, +}; + +/** + * WLP Association Message Type + * WLP Draft 0.99 [6.6.1.2 Table 8] + */ +enum wlp_assoc_type { + WLP_ASSOC_D1 = 2, + WLP_ASSOC_D2 = 3, + WLP_ASSOC_M1 = 4, + WLP_ASSOC_M2 = 5, + WLP_ASSOC_M3 = 7, + WLP_ASSOC_M4 = 8, + WLP_ASSOC_M5 = 9, + WLP_ASSOC_M6 = 10, + WLP_ASSOC_M7 = 11, + WLP_ASSOC_M8 = 12, + WLP_ASSOC_F0 = 14, + WLP_ASSOC_E1 = 32, + WLP_ASSOC_E2 = 33, + WLP_ASSOC_C1 = 34, + WLP_ASSOC_C2 = 35, + WLP_ASSOC_C3 = 36, + WLP_ASSOC_C4 = 37, +}; + +/** + * WLP Attribute Type + * WLP Draft 0.99 [6.6.1 Table 6] + */ +enum wlp_attr_type { + WLP_ATTR_AUTH = 0x1005, /* Authenticator */ + WLP_ATTR_DEV_NAME = 0x1011, /* Device Name */ + WLP_ATTR_DEV_PWD_ID = 0x1012, /* Device Password ID */ + WLP_ATTR_E_HASH1 = 0x1014, /* E-Hash1 */ + WLP_ATTR_E_HASH2 = 0x1015, /* E-Hash2 */ + WLP_ATTR_E_SNONCE1 = 0x1016, /* E-SNonce1 */ + WLP_ATTR_E_SNONCE2 = 0x1017, /* E-SNonce2 */ + WLP_ATTR_ENCR_SET = 0x1018, /* Encrypted Settings */ + WLP_ATTR_ENRL_NONCE = 0x101A, /* Enrollee Nonce */ + WLP_ATTR_KEYWRAP_AUTH = 0x101E, /* Key Wrap Authenticator */ + WLP_ATTR_MANUF = 0x1021, /* Manufacturer */ + WLP_ATTR_MSG_TYPE = 0x1022, /* Message Type */ + WLP_ATTR_MODEL_NAME = 0x1023, /* Model Name */ + WLP_ATTR_MODEL_NR = 0x1024, /* Model Number */ + WLP_ATTR_PUB_KEY = 0x1032, /* Public Key */ + WLP_ATTR_REG_NONCE = 0x1039, /* Registrar Nonce */ + WLP_ATTR_R_HASH1 = 0x103D, /* R-Hash1 */ + WLP_ATTR_R_HASH2 = 0x103E, /* R-Hash2 */ + WLP_ATTR_R_SNONCE1 = 0x103F, /* R-SNonce1 */ + WLP_ATTR_R_SNONCE2 = 0x1040, /* R-SNonce2 */ + WLP_ATTR_SERIAL = 0x1042, /* Serial number */ + WLP_ATTR_UUID_E = 0x1047, /* UUID-E */ + WLP_ATTR_UUID_R = 0x1048, /* UUID-R */ + WLP_ATTR_PRI_DEV_TYPE = 0x1054, /* Primary Device Type */ + WLP_ATTR_SEC_DEV_TYPE = 0x1055, /* Secondary Device Type */ + WLP_ATTR_PORT_DEV = 0x1056, /* Portable Device */ + WLP_ATTR_APP_EXT = 0x1058, /* Application Extension */ + WLP_ATTR_WLP_VER = 0x2000, /* WLP Version */ + WLP_ATTR_WSSID = 0x2001, /* WSSID */ + WLP_ATTR_WSS_NAME = 0x2002, /* WSS Name */ + WLP_ATTR_WSS_SEC_STAT = 0x2003, /* WSS Secure Status */ + WLP_ATTR_WSS_BCAST = 0x2004, /* WSS Broadcast Address */ + WLP_ATTR_WSS_M_KEY = 0x2005, /* WSS Master Key */ + WLP_ATTR_ACC_ENRL = 0x2006, /* Accepting Enrollment */ + WLP_ATTR_WSS_INFO = 0x2007, /* WSS Information */ + WLP_ATTR_WSS_SEL_MTHD = 0x2008, /* WSS Selection Method */ + WLP_ATTR_ASSC_MTHD_LIST = 0x2009, /* Association Methods List */ + WLP_ATTR_SEL_ASSC_MTHD = 0x200A, /* Selected Association Method */ + WLP_ATTR_ENRL_HASH_COMM = 0x200B, /* Enrollee Hash Commitment */ + WLP_ATTR_WSS_TAG = 0x200C, /* WSS Tag */ + WLP_ATTR_WSS_VIRT = 0x200D, /* WSS Virtual EUI-48 */ + WLP_ATTR_WLP_ASSC_ERR = 0x200E, /* WLP Association Error */ + WLP_ATTR_VNDR_EXT = 0x200F, /* Vendor Extension */ +}; + +/** + * WLP Category ID of primary/secondary device + * WLP Draft 0.99 [6.6.1.8 Table 12] + */ +enum wlp_dev_category_id { + WLP_DEV_CAT_COMPUTER = 1, + WLP_DEV_CAT_INPUT, + WLP_DEV_CAT_PRINT_SCAN_FAX_COPIER, + WLP_DEV_CAT_CAMERA, + WLP_DEV_CAT_STORAGE, + WLP_DEV_CAT_INFRASTRUCTURE, + WLP_DEV_CAT_DISPLAY, + WLP_DEV_CAT_MULTIM, + WLP_DEV_CAT_GAMING, + WLP_DEV_CAT_TELEPHONE, + WLP_DEV_CAT_OTHER = 65535, +}; + +/** + * WLP WSS selection method + * WLP Draft 0.99 [6.6.1.6 Table 10] + */ +enum wlp_wss_sel_mthd { + WLP_WSS_ENRL_SELECT = 1, /* Enrollee selects */ + WLP_WSS_REG_SELECT, /* Registrar selects */ +}; + +/** + * WLP association error values + * WLP Draft 0.99 [6.6.1.5 Table 9] + */ +enum wlp_assc_error { + WLP_ASSOC_ERROR_NONE, + WLP_ASSOC_ERROR_AUTH, /* Authenticator Failure */ + WLP_ASSOC_ERROR_ROGUE, /* Rogue activity suspected */ + WLP_ASSOC_ERROR_BUSY, /* Device busy */ + WLP_ASSOC_ERROR_LOCK, /* Setup Locked */ + WLP_ASSOC_ERROR_NOT_READY, /* Registrar not ready */ + WLP_ASSOC_ERROR_INV, /* Invalid WSS selection */ + WLP_ASSOC_ERROR_MSG_TIME, /* Message timeout */ + WLP_ASSOC_ERROR_ENR_TIME, /* Enrollment session timeout */ + WLP_ASSOC_ERROR_PW, /* Device password invalid */ + WLP_ASSOC_ERROR_VER, /* Unsupported version */ + WLP_ASSOC_ERROR_INT, /* Internal error */ + WLP_ASSOC_ERROR_UNDEF, /* Undefined error */ + WLP_ASSOC_ERROR_NUM, /* Numeric comparison failure */ + WLP_ASSOC_ERROR_WAIT, /* Waiting for user input */ +}; + +/** + * WLP Parameters + * WLP 0.99 [7.7] + */ +enum wlp_parameters { + WLP_PER_MSG_TIMEOUT = 15, /* Seconds to wait for response to + association message. */ +}; + +/** + * WLP IE + * + * The WLP IE should be included in beacons by all devices. + * + * The driver can set only a few of the fields in this information element, + * most fields are managed by the device self. When the driver needs to set + * a field it will only provide values for the fields of interest, the rest + * will be filled with zeroes. The fields of interest are: + * + * Element ID + * Length + * Capabilities (only to include WSSID Hash list length) + * WSSID Hash List fields + * + * WLP 0.99 [6.7] + * + * Only the fields that will be used are detailed in this structure, rest + * are not detailed or marked as "notused". + */ +struct wlp_ie { + struct uwb_ie_hdr hdr; + __le16 capabilities; + __le16 cycle_param; + __le16 acw_anchor_addr; + u8 wssid_hash_list[]; +} __attribute__((packed)); + +static inline int wlp_ie_hash_length(struct wlp_ie *ie) +{ + return (le16_to_cpu(ie->capabilities) >> 12) & 0xf; +} + +static inline void wlp_ie_set_hash_length(struct wlp_ie *ie, int hash_length) +{ + u16 caps = le16_to_cpu(ie->capabilities); + caps = (caps & ~(0xf << 12)) | (hash_length << 12); + ie->capabilities = cpu_to_le16(caps); +} + +/** + * WLP nonce + * WLP Draft 0.99 [6.6.1 Table 6] + * + * A 128-bit random number often used (E-SNonce1, E-SNonce2, Enrollee + * Nonce, Registrar Nonce, R-SNonce1, R-SNonce2). It is passed to HW so + * it is packed. + */ +struct wlp_nonce { + u8 data[16]; +} __attribute__((packed)); + +/** + * WLP UUID + * WLP Draft 0.99 [6.6.1 Table 6] + * + * Universally Unique Identifier (UUID) encoded as an octet string in the + * order the octets are shown in string representation in RFC4122. A UUID + * is often used (UUID-E, UUID-R, WSSID). It is passed to HW so it is packed. + */ +struct wlp_uuid { + u8 data[16]; +} __attribute__((packed)); + + +/** + * Primary and secondary device type attributes + * WLP Draft 0.99 [6.6.1.8] + */ +struct wlp_dev_type { + enum wlp_dev_category_id category:16; + u8 OUI[3]; + u8 OUIsubdiv; + __le16 subID; +} __attribute__((packed)); + +/** + * WLP frame header + * WLP Draft 0.99 [6.2] + */ +struct wlp_frame_hdr { + __le16 mux_hdr; /* WLP_PROTOCOL_ID */ + enum wlp_frame_type type:8; +} __attribute__((packed)); + +/** + * WLP attribute field header + * WLP Draft 0.99 [6.6.1] + * + * Header of each attribute found in an association frame + */ +struct wlp_attr_hdr { + __le16 type; + __le16 length; +} __attribute__((packed)); + +/** + * Device information commonly used together + * + * Each of these device information elements has a specified range in which it + * should fit (WLP 0.99 [Table 6]). This range provided in the spec does not + * include the termination null '\0' character (when used in the + * association protocol the attribute fields are accompanied + * with a "length" field so the full range from the spec can be used for + * the value). We thus allocate an extra byte to be able to store a string + * of max length with a terminating '\0'. + */ +struct wlp_device_info { + char name[33]; + char model_name[33]; + char manufacturer[65]; + char model_nr[33]; + char serial[33]; + struct wlp_dev_type prim_dev_type; +}; + +/** + * Macros for the WLP attributes + * + * There are quite a few attributes (total is 43). The attribute layout can be + * in one of three categories: one value, an array, an enum forced to 8 bits. + * These macros help with their definitions. + */ +#define wlp_attr(type, name) \ +struct wlp_attr_##name { \ + struct wlp_attr_hdr hdr; \ + type name; \ +} __attribute__((packed)); + +#define wlp_attr_array(type, name) \ +struct wlp_attr_##name { \ + struct wlp_attr_hdr hdr; \ + type name[]; \ +} __attribute__((packed)); + +/** + * WLP association attribute fields + * WLP Draft 0.99 [6.6.1 Table 6] + * + * Attributes appear in same order as the Table in the spec + * FIXME Does not define all attributes yet + */ + +/* Device name: Friendly name of sending device */ +wlp_attr_array(u8, dev_name) + +/* Enrollee Nonce: Random number generated by enrollee for an enrollment + * session */ +wlp_attr(struct wlp_nonce, enonce) + +/* Manufacturer name: Name of manufacturer of the sending device */ +wlp_attr_array(u8, manufacturer) + +/* WLP Message Type */ +wlp_attr(u8, msg_type) + +/* WLP Model name: Model name of sending device */ +wlp_attr_array(u8, model_name) + +/* WLP Model number: Model number of sending device */ +wlp_attr_array(u8, model_nr) + +/* Registrar Nonce: Random number generated by registrar for an enrollment + * session */ +wlp_attr(struct wlp_nonce, rnonce) + +/* Serial number of device */ +wlp_attr_array(u8, serial) + +/* UUID of enrollee */ +wlp_attr(struct wlp_uuid, uuid_e) + +/* UUID of registrar */ +wlp_attr(struct wlp_uuid, uuid_r) + +/* WLP Primary device type */ +wlp_attr(struct wlp_dev_type, prim_dev_type) + +/* WLP Secondary device type */ +wlp_attr(struct wlp_dev_type, sec_dev_type) + +/* WLP protocol version */ +wlp_attr(u8, version) + +/* WLP service set identifier */ +wlp_attr(struct wlp_uuid, wssid) + +/* WLP WSS name */ +wlp_attr_array(u8, wss_name) + +/* WLP WSS Secure Status */ +wlp_attr(u8, wss_sec_status) + +/* WSS Broadcast Address */ +wlp_attr(struct uwb_mac_addr, wss_bcast) + +/* WLP Accepting Enrollment */ +wlp_attr(u8, accept_enrl) + +/** + * WSS information attributes + * WLP Draft 0.99 [6.6.3 Table 15] + */ +struct wlp_wss_info { + struct wlp_attr_wssid wssid; + struct wlp_attr_wss_name name; + struct wlp_attr_accept_enrl accept; + struct wlp_attr_wss_sec_status sec_stat; + struct wlp_attr_wss_bcast bcast; +} __attribute__((packed)); + +/* WLP WSS Information */ +wlp_attr_array(struct wlp_wss_info, wss_info) + +/* WLP WSS Selection method */ +wlp_attr(u8, wss_sel_mthd) + +/* WLP WSS tag */ +wlp_attr(u8, wss_tag) + +/* WSS Virtual Address */ +wlp_attr(struct uwb_mac_addr, wss_virt) + +/* WLP association error */ +wlp_attr(u8, wlp_assc_err) + +/** + * WLP standard and abbreviated frames + * + * WLP Draft 0.99 [6.3] and [6.4] + * + * The difference between the WLP standard frame and the WLP + * abbreviated frame is that the standard frame includes the src + * and dest addresses from the Ethernet header, the abbreviated frame does + * not. + * The src/dest (as well as the type/length and client data) are already + * defined as part of the Ethernet header, we do not do this here. + * From this perspective the standard and abbreviated frames appear the + * same - they will be treated differently though. + * + * The size of this header is also captured in WLP_DATA_HLEN to enable + * interfaces to prepare their headroom. + */ +struct wlp_frame_std_abbrv_hdr { + struct wlp_frame_hdr hdr; + u8 tag; +} __attribute__((packed)); + +/** + * WLP association frames + * + * WLP Draft 0.99 [6.6] + */ +struct wlp_frame_assoc { + struct wlp_frame_hdr hdr; + enum wlp_assoc_type type:8; + struct wlp_attr_version version; + struct wlp_attr_msg_type msg_type; + u8 attr[]; +} __attribute__((packed)); + +/* Ethernet to dev address mapping */ +struct wlp_eda { + spinlock_t lock; + struct list_head cache; /* Eth<->Dev Addr cache */ +}; + +/** + * WSS information temporary storage + * + * This information is only stored temporarily during discovery. It should + * not be stored unless the device is enrolled in the advertised WSS. This + * is done mainly because we follow the letter of the spec in this regard. + * See WLP 0.99 [7.2.3]. + * When the device does become enrolled in a WSS the WSS information will + * be stored as part of the more comprehensive struct wlp_wss. + */ +struct wlp_wss_tmp_info { + char name[WLP_WSS_NAME_SIZE]; + u8 accept_enroll; + u8 sec_status; + struct uwb_mac_addr bcast; +}; + +struct wlp_wssid_e { + struct list_head node; + struct wlp_uuid wssid; + struct wlp_wss_tmp_info *info; +}; + +/** + * A cache entry of WLP neighborhood + * + * @node: head of list is wlp->neighbors + * @wssid: list of wssids of this neighbor, element is wlp_wssid_e + * @info: temporary storage for information learned during discovery. This + * storage is used together with the wssid_e temporary storage + * during discovery. + */ +struct wlp_neighbor_e { + struct list_head node; + struct wlp_uuid uuid; + struct uwb_dev *uwb_dev; + struct list_head wssid; /* Elements are wlp_wssid_e */ + struct wlp_device_info *info; +}; + +struct wlp; +/** + * Information for an association session in progress. + * + * @exp_message: The type of the expected message. Both this message and a + * F0 message (which can be sent in response to any + * association frame) will be accepted as a valid message for + * this session. + * @cb: The function that will be called upon receipt of this + * message. + * @cb_priv: Private data of callback + * @data: Data used in association process (always a sk_buff?) + * @neighbor: Address of neighbor with which association session is in + * progress. + */ +struct wlp_session { + enum wlp_assoc_type exp_message; + void (*cb)(struct wlp *); + void *cb_priv; + void *data; + struct uwb_dev_addr neighbor_addr; +}; + +/** + * WLP Service Set + * + * @mutex: used to protect entire WSS structure. + * + * @name: The WSS name is set to 65 bytes, 1 byte larger than the maximum + * allowed by the WLP spec. This is to have a null terminated string + * for display to the user. A maximum of 64 bytes will still be used + * when placing the WSS name field in association frames. + * + * @accept_enroll: Accepting enrollment: Set to one if registrar is + * accepting enrollment in WSS, or zero otherwise. + * + * Global and local information for each WSS in which we are enrolled. + * WLP 0.99 Section 7.2.1 and Section 7.2.2 + */ +struct wlp_wss { + struct mutex mutex; + struct kobject kobj; + /* Global properties. */ + struct wlp_uuid wssid; + u8 hash; + char name[WLP_WSS_NAME_SIZE]; + struct uwb_mac_addr bcast; + u8 secure_status:1; + u8 master_key[16]; + /* Local properties. */ + u8 tag; + struct uwb_mac_addr virtual_addr; + /* Extra */ + u8 accept_enroll:1; + enum wlp_wss_state state; +}; + +/** + * WLP main structure + * @mutex: protect changes to WLP structure. We only allow changes to the + * uuid, so currently this mutex only protects this field. + */ +struct wlp { + struct mutex mutex; + struct uwb_rc *rc; /* UWB radio controller */ + struct uwb_pal pal; + struct wlp_eda eda; + struct wlp_uuid uuid; + struct wlp_session *session; + struct wlp_wss wss; + struct mutex nbmutex; /* Neighbor mutex protects neighbors list */ + struct list_head neighbors; /* Elements are wlp_neighbor_e */ + struct uwb_notifs_handler uwb_notifs_handler; + struct wlp_device_info *dev_info; + void (*fill_device_info)(struct wlp *wlp, struct wlp_device_info *info); + int (*xmit_frame)(struct wlp *, struct sk_buff *, + struct uwb_dev_addr *); + void (*stop_queue)(struct wlp *); + void (*start_queue)(struct wlp *); +}; + +/* sysfs */ + + +struct wlp_wss_attribute { + struct attribute attr; + ssize_t (*show)(struct wlp_wss *wss, char *buf); + ssize_t (*store)(struct wlp_wss *wss, const char *buf, size_t count); +}; + +#define WSS_ATTR(_name, _mode, _show, _store) \ +static struct wlp_wss_attribute wss_attr_##_name = __ATTR(_name, _mode, \ + _show, _store) + +extern int wlp_setup(struct wlp *, struct uwb_rc *); +extern void wlp_remove(struct wlp *); +extern ssize_t wlp_neighborhood_show(struct wlp *, char *); +extern int wlp_wss_setup(struct net_device *, struct wlp_wss *); +extern void wlp_wss_remove(struct wlp_wss *); +extern ssize_t wlp_wss_activate_show(struct wlp_wss *, char *); +extern ssize_t wlp_wss_activate_store(struct wlp_wss *, const char *, size_t); +extern ssize_t wlp_eda_show(struct wlp *, char *); +extern ssize_t wlp_eda_store(struct wlp *, const char *, size_t); +extern ssize_t wlp_uuid_show(struct wlp *, char *); +extern ssize_t wlp_uuid_store(struct wlp *, const char *, size_t); +extern ssize_t wlp_dev_name_show(struct wlp *, char *); +extern ssize_t wlp_dev_name_store(struct wlp *, const char *, size_t); +extern ssize_t wlp_dev_manufacturer_show(struct wlp *, char *); +extern ssize_t wlp_dev_manufacturer_store(struct wlp *, const char *, size_t); +extern ssize_t wlp_dev_model_name_show(struct wlp *, char *); +extern ssize_t wlp_dev_model_name_store(struct wlp *, const char *, size_t); +extern ssize_t wlp_dev_model_nr_show(struct wlp *, char *); +extern ssize_t wlp_dev_model_nr_store(struct wlp *, const char *, size_t); +extern ssize_t wlp_dev_serial_show(struct wlp *, char *); +extern ssize_t wlp_dev_serial_store(struct wlp *, const char *, size_t); +extern ssize_t wlp_dev_prim_category_show(struct wlp *, char *); +extern ssize_t wlp_dev_prim_category_store(struct wlp *, const char *, + size_t); +extern ssize_t wlp_dev_prim_OUI_show(struct wlp *, char *); +extern ssize_t wlp_dev_prim_OUI_store(struct wlp *, const char *, size_t); +extern ssize_t wlp_dev_prim_OUI_sub_show(struct wlp *, char *); +extern ssize_t wlp_dev_prim_OUI_sub_store(struct wlp *, const char *, + size_t); +extern ssize_t wlp_dev_prim_subcat_show(struct wlp *, char *); +extern ssize_t wlp_dev_prim_subcat_store(struct wlp *, const char *, + size_t); +extern int wlp_receive_frame(struct device *, struct wlp *, struct sk_buff *, + struct uwb_dev_addr *); +extern int wlp_prepare_tx_frame(struct device *, struct wlp *, + struct sk_buff *, struct uwb_dev_addr *); +void wlp_reset_all(struct wlp *wlp); + +/** + * Initialize WSS + */ +static inline +void wlp_wss_init(struct wlp_wss *wss) +{ + mutex_init(&wss->mutex); +} + +static inline +void wlp_init(struct wlp *wlp) +{ + INIT_LIST_HEAD(&wlp->neighbors); + mutex_init(&wlp->mutex); + mutex_init(&wlp->nbmutex); + wlp_wss_init(&wlp->wss); +} + + +#endif /* #ifndef __LINUX__WLP_H_ */ diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h index 5c158c477ac7..89a5a1231ffb 100644 --- a/include/linux/workqueue.h +++ b/include/linux/workqueue.h @@ -149,11 +149,11 @@ struct execute_work { extern struct workqueue_struct * __create_workqueue_key(const char *name, int singlethread, - int freezeable, struct lock_class_key *key, + int freezeable, int rt, struct lock_class_key *key, const char *lock_name); #ifdef CONFIG_LOCKDEP -#define __create_workqueue(name, singlethread, freezeable) \ +#define __create_workqueue(name, singlethread, freezeable, rt) \ ({ \ static struct lock_class_key __key; \ const char *__lock_name; \ @@ -164,17 +164,19 @@ __create_workqueue_key(const char *name, int singlethread, __lock_name = #name; \ \ __create_workqueue_key((name), (singlethread), \ - (freezeable), &__key, \ + (freezeable), (rt), &__key, \ __lock_name); \ }) #else -#define __create_workqueue(name, singlethread, freezeable) \ - __create_workqueue_key((name), (singlethread), (freezeable), NULL, NULL) +#define __create_workqueue(name, singlethread, freezeable, rt) \ + __create_workqueue_key((name), (singlethread), (freezeable), (rt), \ + NULL, NULL) #endif -#define create_workqueue(name) __create_workqueue((name), 0, 0) -#define create_freezeable_workqueue(name) __create_workqueue((name), 1, 1) -#define create_singlethread_workqueue(name) __create_workqueue((name), 1, 0) +#define create_workqueue(name) __create_workqueue((name), 0, 0, 0) +#define create_rt_workqueue(name) __create_workqueue((name), 0, 0, 1) +#define create_freezeable_workqueue(name) __create_workqueue((name), 1, 1, 0) +#define create_singlethread_workqueue(name) __create_workqueue((name), 1, 0, 0) extern void destroy_workqueue(struct workqueue_struct *wq); diff --git a/include/media/v4l2-int-device.h b/include/media/v4l2-int-device.h index c8b80e0f0651..9c2df41dbf92 100644 --- a/include/media/v4l2-int-device.h +++ b/include/media/v4l2-int-device.h @@ -84,6 +84,8 @@ struct v4l2_int_device { void *priv; }; +void v4l2_int_device_try_attach_all(void); + int v4l2_int_device_register(struct v4l2_int_device *d); void v4l2_int_device_unregister(struct v4l2_int_device *d); @@ -96,6 +98,12 @@ int v4l2_int_ioctl_1(struct v4l2_int_device *d, int cmd, void *arg); * */ +enum v4l2_power { + V4L2_POWER_OFF = 0, + V4L2_POWER_ON, + V4L2_POWER_STANDBY, +}; + /* Slave interface type. */ enum v4l2_if_type { /* @@ -170,6 +178,9 @@ enum v4l2_int_ioctl_num { vidioc_int_queryctrl_num, vidioc_int_g_ctrl_num, vidioc_int_s_ctrl_num, + vidioc_int_cropcap_num, + vidioc_int_g_crop_num, + vidioc_int_s_crop_num, vidioc_int_g_parm_num, vidioc_int_s_parm_num, @@ -182,12 +193,19 @@ enum v4l2_int_ioctl_num { vidioc_int_dev_init_num = 1000, /* Delinitialise the device at slave detach. */ vidioc_int_dev_exit_num, - /* Set device power state: 0 is off, non-zero is on. */ + /* Set device power state. */ vidioc_int_s_power_num, + /* + * Get slave private data, e.g. platform-specific slave + * configuration used by the master. + */ + vidioc_int_g_priv_num, /* Get slave interface parameters. */ vidioc_int_g_ifparm_num, /* Does the slave need to be reset after VIDIOC_DQBUF? */ vidioc_int_g_needs_reset_num, + vidioc_int_enum_framesizes_num, + vidioc_int_enum_frameintervals_num, /* * @@ -261,14 +279,20 @@ V4L2_INT_WRAPPER_1(try_fmt_cap, struct v4l2_format, *); V4L2_INT_WRAPPER_1(queryctrl, struct v4l2_queryctrl, *); V4L2_INT_WRAPPER_1(g_ctrl, struct v4l2_control, *); V4L2_INT_WRAPPER_1(s_ctrl, struct v4l2_control, *); +V4L2_INT_WRAPPER_1(cropcap, struct v4l2_cropcap, *); +V4L2_INT_WRAPPER_1(g_crop, struct v4l2_crop, *); +V4L2_INT_WRAPPER_1(s_crop, struct v4l2_crop, *); V4L2_INT_WRAPPER_1(g_parm, struct v4l2_streamparm, *); V4L2_INT_WRAPPER_1(s_parm, struct v4l2_streamparm, *); V4L2_INT_WRAPPER_0(dev_init); V4L2_INT_WRAPPER_0(dev_exit); -V4L2_INT_WRAPPER_1(s_power, int, ); +V4L2_INT_WRAPPER_1(s_power, enum v4l2_power, ); +V4L2_INT_WRAPPER_1(g_priv, void, *); V4L2_INT_WRAPPER_1(g_ifparm, struct v4l2_ifparm, *); V4L2_INT_WRAPPER_1(g_needs_reset, void, *); +V4L2_INT_WRAPPER_1(enum_framesizes, struct v4l2_frmsizeenum, *); +V4L2_INT_WRAPPER_1(enum_frameintervals, struct v4l2_frmivalenum, *); V4L2_INT_WRAPPER_0(reset); V4L2_INT_WRAPPER_0(init); diff --git a/include/media/v4l2-ioctl.h b/include/media/v4l2-ioctl.h index 0bef03add796..e6ba25b3d7c8 100644 --- a/include/media/v4l2-ioctl.h +++ b/include/media/v4l2-ioctl.h @@ -271,26 +271,38 @@ extern const char *v4l2_field_names[]; extern const char *v4l2_type_names[]; /* Compatibility layer interface -- v4l1-compat module */ -typedef int (*v4l2_kioctl)(struct inode *inode, struct file *file, +typedef int (*v4l2_kioctl)(struct file *file, unsigned int cmd, void *arg); #ifdef CONFIG_VIDEO_V4L1_COMPAT -int v4l_compat_translate_ioctl(struct inode *inode, struct file *file, +int v4l_compat_translate_ioctl(struct file *file, int cmd, void *arg, v4l2_kioctl driver_ioctl); #else -#define v4l_compat_translate_ioctl(inode, file, cmd, arg, ioctl) (-EINVAL) +#define v4l_compat_translate_ioctl(file, cmd, arg, ioctl) (-EINVAL) #endif /* 32 Bits compatibility layer for 64 bits processors */ extern long v4l_compat_ioctl32(struct file *file, unsigned int cmd, unsigned long arg); -extern int video_ioctl2(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg); - /* Include support for obsoleted stuff */ extern int video_usercopy(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg, int (*func)(struct inode *inode, struct file *file, unsigned int cmd, void *arg)); +/* Standard handlers for V4L ioctl's */ + +/* This prototype is used on fops.unlocked_ioctl */ +extern int __video_ioctl2(struct file *file, + unsigned int cmd, unsigned long arg); + +/* This prototype is used on fops.ioctl + * Since fops.ioctl enables Kernel Big Lock, it is preferred + * to use __video_ioctl2 instead. + * It should be noticed that there's no lock code inside + * video_ioctl2(). + */ +extern int video_ioctl2(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg); + #endif /* _V4L2_IOCTL_H */ diff --git a/include/media/videobuf-dvb.h b/include/media/videobuf-dvb.h index 80471c2b6343..6ba4f1271d23 100644 --- a/include/media/videobuf-dvb.h +++ b/include/media/videobuf-dvb.h @@ -47,6 +47,7 @@ int videobuf_dvb_register_bus(struct videobuf_dvb_frontends *f, void videobuf_dvb_unregister_bus(struct videobuf_dvb_frontends *f); struct videobuf_dvb_frontend * videobuf_dvb_alloc_frontend(struct videobuf_dvb_frontends *f, int id); +void videobuf_dvb_dealloc_frontends(struct videobuf_dvb_frontends *f); struct videobuf_dvb_frontend * videobuf_dvb_get_frontend(struct videobuf_dvb_frontends *f, int id); int videobuf_dvb_find_frontend(struct videobuf_dvb_frontends *f, struct dvb_frontend *p); diff --git a/include/net/9p/9p.h b/include/net/9p/9p.h index d2c60c73619d..b77c1478c99f 100644 --- a/include/net/9p/9p.h +++ b/include/net/9p/9p.h @@ -56,9 +56,9 @@ enum p9_debug_flags { P9_DEBUG_PKT = (1<<10), }; +#ifdef CONFIG_NET_9P_DEBUG extern unsigned int p9_debug_level; -#ifdef CONFIG_NET_9P_DEBUG #define P9_DPRINTK(level, format, arg...) \ do { \ if ((p9_debug_level & level) == level) {\ diff --git a/include/net/9p/client.h b/include/net/9p/client.h index 1f17f3d93727..4012e07162e5 100644 --- a/include/net/9p/client.h +++ b/include/net/9p/client.h @@ -182,6 +182,7 @@ struct p9_fid { struct list_head dlist; /* list of all fids attached to a dentry */ }; +int p9_client_version(struct p9_client *); struct p9_client *p9_client_create(const char *dev_name, char *options); void p9_client_destroy(struct p9_client *clnt); void p9_client_disconnect(struct p9_client *clnt); @@ -206,6 +207,7 @@ int p9_client_wstat(struct p9_fid *fid, struct p9_wstat *wst); struct p9_req_t *p9_tag_lookup(struct p9_client *, u16); void p9_client_cb(struct p9_client *c, struct p9_req_t *req); +int p9_parse_header(struct p9_fcall *, int32_t *, int8_t *, int16_t *, int); int p9stat_read(char *, int, struct p9_wstat *, int); void p9stat_free(struct p9_wstat *); diff --git a/init/Kconfig b/init/Kconfig index 113c74c07da4..44e9208f9c78 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -739,7 +739,8 @@ config VM_EVENT_COUNTERS config PCI_QUIRKS default y - bool "Enable PCI quirk workarounds" if EMBEDDED && PCI + bool "Enable PCI quirk workarounds" if EMBEDDED + depends on PCI help This enables workarounds for various PCI chipset bugs/quirks. Disable this only if your target machine is diff --git a/init/main.c b/init/main.c index 3e17a3bafe60..b038fa142041 100644 --- a/init/main.c +++ b/init/main.c @@ -52,6 +52,7 @@ #include <linux/key.h> #include <linux/unwind.h> #include <linux/buffer_head.h> +#include <linux/page_cgroup.h> #include <linux/debug_locks.h> #include <linux/debugobjects.h> #include <linux/lockdep.h> @@ -647,6 +648,7 @@ asmlinkage void __init start_kernel(void) vmalloc_init(); vfs_caches_init_early(); cpuset_init_early(); + page_cgroup_init(); mem_init(); enable_debug_pagealloc(); cpu_hotplug_init(); @@ -697,13 +699,7 @@ asmlinkage void __init start_kernel(void) } static int initcall_debug; - -static int __init initcall_debug_setup(char *str) -{ - initcall_debug = 1; - return 1; -} -__setup("initcall_debug", initcall_debug_setup); +core_param(initcall_debug, initcall_debug, bool, 0644); int do_one_initcall(initcall_t fn) { @@ -773,8 +769,6 @@ static void __init do_initcalls(void) static void __init do_basic_setup(void) { rcu_init_sched(); /* needed by module_init stage. */ - /* drivers will send hotplug events */ - init_workqueues(); usermodehelper_init(); driver_init(); init_irq_proc(); @@ -858,6 +852,8 @@ static int __init kernel_init(void * unused) cad_pid = task_pid(current); + init_workqueues(); + smp_prepare_cpus(setup_max_cpus); do_pre_smp_initcalls(); diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c index 4895fde4eb93..10b5092e9bfe 100644 --- a/kernel/irq/chip.c +++ b/kernel/irq/chip.c @@ -76,6 +76,7 @@ void dynamic_irq_cleanup(unsigned int irq) desc->chip_data = NULL; desc->handle_irq = handle_bad_irq; desc->chip = &no_irq_chip; + desc->name = NULL; spin_unlock_irqrestore(&desc->lock, flags); } @@ -127,7 +128,7 @@ int set_irq_type(unsigned int irq, unsigned int type) return 0; spin_lock_irqsave(&desc->lock, flags); - ret = __irq_set_trigger(desc, irq, flags); + ret = __irq_set_trigger(desc, irq, type); spin_unlock_irqrestore(&desc->lock, flags); return ret; } diff --git a/kernel/module.c b/kernel/module.c index 0d8d21ee792c..c0f1826e2d9e 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -42,6 +42,7 @@ #include <linux/string.h> #include <linux/mutex.h> #include <linux/unwind.h> +#include <linux/rculist.h> #include <asm/uaccess.h> #include <asm/cacheflush.h> #include <linux/license.h> @@ -63,7 +64,7 @@ #define INIT_OFFSET_MASK (1UL << (BITS_PER_LONG-1)) /* List of modules, protected by module_mutex or preempt_disable - * (add/delete uses stop_machine). */ + * (delete uses stop_machine/add uses RCU list operations). */ static DEFINE_MUTEX(module_mutex); static LIST_HEAD(modules); @@ -132,6 +133,29 @@ static unsigned int find_sec(Elf_Ehdr *hdr, return 0; } +/* Find a module section, or NULL. */ +static void *section_addr(Elf_Ehdr *hdr, Elf_Shdr *shdrs, + const char *secstrings, const char *name) +{ + /* Section 0 has sh_addr 0. */ + return (void *)shdrs[find_sec(hdr, shdrs, secstrings, name)].sh_addr; +} + +/* Find a module section, or NULL. Fill in number of "objects" in section. */ +static void *section_objs(Elf_Ehdr *hdr, + Elf_Shdr *sechdrs, + const char *secstrings, + const char *name, + size_t object_size, + unsigned int *num) +{ + unsigned int sec = find_sec(hdr, sechdrs, secstrings, name); + + /* Section 0 has sh_addr 0 and sh_size 0. */ + *num = sechdrs[sec].sh_size / object_size; + return (void *)sechdrs[sec].sh_addr; +} + /* Provided by the linker */ extern const struct kernel_symbol __start___ksymtab[]; extern const struct kernel_symbol __stop___ksymtab[]; @@ -218,7 +242,7 @@ static bool each_symbol(bool (*fn)(const struct symsearch *arr, if (each_symbol_in_section(arr, ARRAY_SIZE(arr), NULL, fn, data)) return true; - list_for_each_entry(mod, &modules, list) { + list_for_each_entry_rcu(mod, &modules, list) { struct symsearch arr[] = { { mod->syms, mod->syms + mod->num_syms, mod->crcs, NOT_GPL_ONLY, false }, @@ -1394,17 +1418,6 @@ static void mod_kobject_remove(struct module *mod) } /* - * link the module with the whole machine is stopped with interrupts off - * - this defends against kallsyms not taking locks - */ -static int __link_module(void *_mod) -{ - struct module *mod = _mod; - list_add(&mod->list, &modules); - return 0; -} - -/* * unlink the module with the whole machine is stopped with interrupts off * - this defends against kallsyms not taking locks */ @@ -1789,32 +1802,20 @@ static inline void add_kallsyms(struct module *mod, } #endif /* CONFIG_KALLSYMS */ -#ifdef CONFIG_DYNAMIC_PRINTK_DEBUG -static void dynamic_printk_setup(Elf_Shdr *sechdrs, unsigned int verboseindex) +static void dynamic_printk_setup(struct mod_debug *debug, unsigned int num) { - struct mod_debug *debug_info; - unsigned long pos, end; - unsigned int num_verbose; - - pos = sechdrs[verboseindex].sh_addr; - num_verbose = sechdrs[verboseindex].sh_size / - sizeof(struct mod_debug); - end = pos + (num_verbose * sizeof(struct mod_debug)); +#ifdef CONFIG_DYNAMIC_PRINTK_DEBUG + unsigned int i; - for (; pos < end; pos += sizeof(struct mod_debug)) { - debug_info = (struct mod_debug *)pos; - register_dynamic_debug_module(debug_info->modname, - debug_info->type, debug_info->logical_modname, - debug_info->flag_names, debug_info->hash, - debug_info->hash2); + for (i = 0; i < num; i++) { + register_dynamic_debug_module(debug[i].modname, + debug[i].type, + debug[i].logical_modname, + debug[i].flag_names, + debug[i].hash, debug[i].hash2); } -} -#else -static inline void dynamic_printk_setup(Elf_Shdr *sechdrs, - unsigned int verboseindex) -{ -} #endif /* CONFIG_DYNAMIC_PRINTK_DEBUG */ +} static void *module_alloc_update_bounds(unsigned long size) { @@ -1843,37 +1844,14 @@ static noinline struct module *load_module(void __user *umod, unsigned int i; unsigned int symindex = 0; unsigned int strindex = 0; - unsigned int setupindex; - unsigned int exindex; - unsigned int exportindex; - unsigned int modindex; - unsigned int obsparmindex; - unsigned int infoindex; - unsigned int gplindex; - unsigned int crcindex; - unsigned int gplcrcindex; - unsigned int versindex; - unsigned int pcpuindex; - unsigned int gplfutureindex; - unsigned int gplfuturecrcindex; + unsigned int modindex, versindex, infoindex, pcpuindex; unsigned int unwindex = 0; -#ifdef CONFIG_UNUSED_SYMBOLS - unsigned int unusedindex; - unsigned int unusedcrcindex; - unsigned int unusedgplindex; - unsigned int unusedgplcrcindex; -#endif - unsigned int markersindex; - unsigned int markersstringsindex; - unsigned int verboseindex; - unsigned int tracepointsindex; - unsigned int tracepointsstringsindex; - unsigned int mcountindex; + unsigned int num_kp, num_mcount; + struct kernel_param *kp; struct module *mod; long err = 0; void *percpu = NULL, *ptr = NULL; /* Stops spurious gcc warning */ - void *mseg; - struct exception_table_entry *extable; + unsigned long *mseg; mm_segment_t old_fs; DEBUGP("load_module: umod=%p, len=%lu, uargs=%p\n", @@ -1937,6 +1915,7 @@ static noinline struct module *load_module(void __user *umod, err = -ENOEXEC; goto free_hdr; } + /* This is temporary: point mod into copy of data. */ mod = (void *)sechdrs[modindex].sh_addr; if (symindex == 0) { @@ -1946,22 +1925,6 @@ static noinline struct module *load_module(void __user *umod, goto free_hdr; } - /* Optional sections */ - exportindex = find_sec(hdr, sechdrs, secstrings, "__ksymtab"); - gplindex = find_sec(hdr, sechdrs, secstrings, "__ksymtab_gpl"); - gplfutureindex = find_sec(hdr, sechdrs, secstrings, "__ksymtab_gpl_future"); - crcindex = find_sec(hdr, sechdrs, secstrings, "__kcrctab"); - gplcrcindex = find_sec(hdr, sechdrs, secstrings, "__kcrctab_gpl"); - gplfuturecrcindex = find_sec(hdr, sechdrs, secstrings, "__kcrctab_gpl_future"); -#ifdef CONFIG_UNUSED_SYMBOLS - unusedindex = find_sec(hdr, sechdrs, secstrings, "__ksymtab_unused"); - unusedgplindex = find_sec(hdr, sechdrs, secstrings, "__ksymtab_unused_gpl"); - unusedcrcindex = find_sec(hdr, sechdrs, secstrings, "__kcrctab_unused"); - unusedgplcrcindex = find_sec(hdr, sechdrs, secstrings, "__kcrctab_unused_gpl"); -#endif - setupindex = find_sec(hdr, sechdrs, secstrings, "__param"); - exindex = find_sec(hdr, sechdrs, secstrings, "__ex_table"); - obsparmindex = find_sec(hdr, sechdrs, secstrings, "__obsparm"); versindex = find_sec(hdr, sechdrs, secstrings, "__versions"); infoindex = find_sec(hdr, sechdrs, secstrings, ".modinfo"); pcpuindex = find_pcpusec(hdr, sechdrs, secstrings); @@ -2117,42 +2080,57 @@ static noinline struct module *load_module(void __user *umod, if (err < 0) goto cleanup; - /* Set up EXPORTed & EXPORT_GPLed symbols (section 0 is 0 length) */ - mod->num_syms = sechdrs[exportindex].sh_size / sizeof(*mod->syms); - mod->syms = (void *)sechdrs[exportindex].sh_addr; - if (crcindex) - mod->crcs = (void *)sechdrs[crcindex].sh_addr; - mod->num_gpl_syms = sechdrs[gplindex].sh_size / sizeof(*mod->gpl_syms); - mod->gpl_syms = (void *)sechdrs[gplindex].sh_addr; - if (gplcrcindex) - mod->gpl_crcs = (void *)sechdrs[gplcrcindex].sh_addr; - mod->num_gpl_future_syms = sechdrs[gplfutureindex].sh_size / - sizeof(*mod->gpl_future_syms); - mod->gpl_future_syms = (void *)sechdrs[gplfutureindex].sh_addr; - if (gplfuturecrcindex) - mod->gpl_future_crcs = (void *)sechdrs[gplfuturecrcindex].sh_addr; + /* Now we've got everything in the final locations, we can + * find optional sections. */ + kp = section_objs(hdr, sechdrs, secstrings, "__param", sizeof(*kp), + &num_kp); + mod->syms = section_objs(hdr, sechdrs, secstrings, "__ksymtab", + sizeof(*mod->syms), &mod->num_syms); + mod->crcs = section_addr(hdr, sechdrs, secstrings, "__kcrctab"); + mod->gpl_syms = section_objs(hdr, sechdrs, secstrings, "__ksymtab_gpl", + sizeof(*mod->gpl_syms), + &mod->num_gpl_syms); + mod->gpl_crcs = section_addr(hdr, sechdrs, secstrings, "__kcrctab_gpl"); + mod->gpl_future_syms = section_objs(hdr, sechdrs, secstrings, + "__ksymtab_gpl_future", + sizeof(*mod->gpl_future_syms), + &mod->num_gpl_future_syms); + mod->gpl_future_crcs = section_addr(hdr, sechdrs, secstrings, + "__kcrctab_gpl_future"); #ifdef CONFIG_UNUSED_SYMBOLS - mod->num_unused_syms = sechdrs[unusedindex].sh_size / - sizeof(*mod->unused_syms); - mod->num_unused_gpl_syms = sechdrs[unusedgplindex].sh_size / - sizeof(*mod->unused_gpl_syms); - mod->unused_syms = (void *)sechdrs[unusedindex].sh_addr; - if (unusedcrcindex) - mod->unused_crcs = (void *)sechdrs[unusedcrcindex].sh_addr; - mod->unused_gpl_syms = (void *)sechdrs[unusedgplindex].sh_addr; - if (unusedgplcrcindex) - mod->unused_gpl_crcs - = (void *)sechdrs[unusedgplcrcindex].sh_addr; + mod->unused_syms = section_objs(hdr, sechdrs, secstrings, + "__ksymtab_unused", + sizeof(*mod->unused_syms), + &mod->num_unused_syms); + mod->unused_crcs = section_addr(hdr, sechdrs, secstrings, + "__kcrctab_unused"); + mod->unused_gpl_syms = section_objs(hdr, sechdrs, secstrings, + "__ksymtab_unused_gpl", + sizeof(*mod->unused_gpl_syms), + &mod->num_unused_gpl_syms); + mod->unused_gpl_crcs = section_addr(hdr, sechdrs, secstrings, + "__kcrctab_unused_gpl"); +#endif + +#ifdef CONFIG_MARKERS + mod->markers = section_objs(hdr, sechdrs, secstrings, "__markers", + sizeof(*mod->markers), &mod->num_markers); +#endif +#ifdef CONFIG_TRACEPOINTS + mod->tracepoints = section_objs(hdr, sechdrs, secstrings, + "__tracepoints", + sizeof(*mod->tracepoints), + &mod->num_tracepoints); #endif #ifdef CONFIG_MODVERSIONS - if ((mod->num_syms && !crcindex) - || (mod->num_gpl_syms && !gplcrcindex) - || (mod->num_gpl_future_syms && !gplfuturecrcindex) + if ((mod->num_syms && !mod->crcs) + || (mod->num_gpl_syms && !mod->gpl_crcs) + || (mod->num_gpl_future_syms && !mod->gpl_future_crcs) #ifdef CONFIG_UNUSED_SYMBOLS - || (mod->num_unused_syms && !unusedcrcindex) - || (mod->num_unused_gpl_syms && !unusedgplcrcindex) + || (mod->num_unused_syms && !mod->unused_crcs) + || (mod->num_unused_gpl_syms && !mod->unused_gpl_crcs) #endif ) { printk(KERN_WARNING "%s: No versions for exported symbols.\n", mod->name); @@ -2161,16 +2139,6 @@ static noinline struct module *load_module(void __user *umod, goto cleanup; } #endif - markersindex = find_sec(hdr, sechdrs, secstrings, "__markers"); - markersstringsindex = find_sec(hdr, sechdrs, secstrings, - "__markers_strings"); - verboseindex = find_sec(hdr, sechdrs, secstrings, "__verbose"); - tracepointsindex = find_sec(hdr, sechdrs, secstrings, "__tracepoints"); - tracepointsstringsindex = find_sec(hdr, sechdrs, secstrings, - "__tracepoints_strings"); - - mcountindex = find_sec(hdr, sechdrs, secstrings, - "__mcount_loc"); /* Now do relocations. */ for (i = 1; i < hdr->e_shnum; i++) { @@ -2193,28 +2161,16 @@ static noinline struct module *load_module(void __user *umod, if (err < 0) goto cleanup; } -#ifdef CONFIG_MARKERS - mod->markers = (void *)sechdrs[markersindex].sh_addr; - mod->num_markers = - sechdrs[markersindex].sh_size / sizeof(*mod->markers); -#endif -#ifdef CONFIG_TRACEPOINTS - mod->tracepoints = (void *)sechdrs[tracepointsindex].sh_addr; - mod->num_tracepoints = - sechdrs[tracepointsindex].sh_size / sizeof(*mod->tracepoints); -#endif - /* Find duplicate symbols */ err = verify_export_symbols(mod); - if (err < 0) goto cleanup; /* Set up and sort exception table */ - mod->num_exentries = sechdrs[exindex].sh_size / sizeof(*mod->extable); - mod->extable = extable = (void *)sechdrs[exindex].sh_addr; - sort_extable(extable, extable + mod->num_exentries); + mod->extable = section_objs(hdr, sechdrs, secstrings, "__ex_table", + sizeof(*mod->extable), &mod->num_exentries); + sort_extable(mod->extable, mod->extable + mod->num_exentries); /* Finally, copy percpu area over. */ percpu_modcopy(mod->percpu, (void *)sechdrs[pcpuindex].sh_addr, @@ -2223,11 +2179,17 @@ static noinline struct module *load_module(void __user *umod, add_kallsyms(mod, sechdrs, symindex, strindex, secstrings); if (!mod->taints) { + struct mod_debug *debug; + unsigned int num_debug; + #ifdef CONFIG_MARKERS marker_update_probe_range(mod->markers, mod->markers + mod->num_markers); #endif - dynamic_printk_setup(sechdrs, verboseindex); + debug = section_objs(hdr, sechdrs, secstrings, "__verbose", + sizeof(*debug), &num_debug); + dynamic_printk_setup(debug, num_debug); + #ifdef CONFIG_TRACEPOINTS tracepoint_update_probe_range(mod->tracepoints, mod->tracepoints + mod->num_tracepoints); @@ -2235,8 +2197,9 @@ static noinline struct module *load_module(void __user *umod, } /* sechdrs[0].sh_size is always zero */ - mseg = (void *)sechdrs[mcountindex].sh_addr; - ftrace_init_module(mseg, mseg + sechdrs[mcountindex].sh_size); + mseg = section_objs(hdr, sechdrs, secstrings, "__mcount_loc", + sizeof(*mseg), &num_mcount); + ftrace_init_module(mseg, mseg + num_mcount); err = module_finalize(hdr, sechdrs, mod); if (err < 0) @@ -2261,30 +2224,24 @@ static noinline struct module *load_module(void __user *umod, set_fs(old_fs); mod->args = args; - if (obsparmindex) + if (section_addr(hdr, sechdrs, secstrings, "__obsparm")) printk(KERN_WARNING "%s: Ignoring obsolete parameters\n", mod->name); /* Now sew it into the lists so we can get lockdep and oops - * info during argument parsing. Noone should access us, since - * strong_try_module_get() will fail. */ - stop_machine(__link_module, mod, NULL); - - /* Size of section 0 is 0, so this works well if no params */ - err = parse_args(mod->name, mod->args, - (struct kernel_param *) - sechdrs[setupindex].sh_addr, - sechdrs[setupindex].sh_size - / sizeof(struct kernel_param), - NULL); + * info during argument parsing. Noone should access us, since + * strong_try_module_get() will fail. + * lockdep/oops can run asynchronous, so use the RCU list insertion + * function to insert in a way safe to concurrent readers. + * The mutex protects against concurrent writers. + */ + list_add_rcu(&mod->list, &modules); + + err = parse_args(mod->name, mod->args, kp, num_kp, NULL); if (err < 0) goto unlink; - err = mod_sysfs_setup(mod, - (struct kernel_param *) - sechdrs[setupindex].sh_addr, - sechdrs[setupindex].sh_size - / sizeof(struct kernel_param)); + err = mod_sysfs_setup(mod, kp, num_kp); if (err < 0) goto unlink; add_sect_attrs(mod, hdr->e_shnum, secstrings, sechdrs); @@ -2473,7 +2430,7 @@ const char *module_address_lookup(unsigned long addr, const char *ret = NULL; preempt_disable(); - list_for_each_entry(mod, &modules, list) { + list_for_each_entry_rcu(mod, &modules, list) { if (within(addr, mod->module_init, mod->init_size) || within(addr, mod->module_core, mod->core_size)) { if (modname) @@ -2496,7 +2453,7 @@ int lookup_module_symbol_name(unsigned long addr, char *symname) struct module *mod; preempt_disable(); - list_for_each_entry(mod, &modules, list) { + list_for_each_entry_rcu(mod, &modules, list) { if (within(addr, mod->module_init, mod->init_size) || within(addr, mod->module_core, mod->core_size)) { const char *sym; @@ -2520,7 +2477,7 @@ int lookup_module_symbol_attrs(unsigned long addr, unsigned long *size, struct module *mod; preempt_disable(); - list_for_each_entry(mod, &modules, list) { + list_for_each_entry_rcu(mod, &modules, list) { if (within(addr, mod->module_init, mod->init_size) || within(addr, mod->module_core, mod->core_size)) { const char *sym; @@ -2547,7 +2504,7 @@ int module_get_kallsym(unsigned int symnum, unsigned long *value, char *type, struct module *mod; preempt_disable(); - list_for_each_entry(mod, &modules, list) { + list_for_each_entry_rcu(mod, &modules, list) { if (symnum < mod->num_symtab) { *value = mod->symtab[symnum].st_value; *type = mod->symtab[symnum].st_info; @@ -2590,7 +2547,7 @@ unsigned long module_kallsyms_lookup_name(const char *name) ret = mod_find_symname(mod, colon+1); *colon = ':'; } else { - list_for_each_entry(mod, &modules, list) + list_for_each_entry_rcu(mod, &modules, list) if ((ret = mod_find_symname(mod, name)) != 0) break; } @@ -2693,7 +2650,7 @@ const struct exception_table_entry *search_module_extables(unsigned long addr) struct module *mod; preempt_disable(); - list_for_each_entry(mod, &modules, list) { + list_for_each_entry_rcu(mod, &modules, list) { if (mod->num_exentries == 0) continue; @@ -2719,7 +2676,7 @@ int is_module_address(unsigned long addr) preempt_disable(); - list_for_each_entry(mod, &modules, list) { + list_for_each_entry_rcu(mod, &modules, list) { if (within(addr, mod->module_core, mod->core_size)) { preempt_enable(); return 1; @@ -2740,7 +2697,7 @@ struct module *__module_text_address(unsigned long addr) if (addr < module_addr_min || addr > module_addr_max) return NULL; - list_for_each_entry(mod, &modules, list) + list_for_each_entry_rcu(mod, &modules, list) if (within(addr, mod->module_init, mod->init_text_size) || within(addr, mod->module_core, mod->core_text_size)) return mod; @@ -2765,8 +2722,11 @@ void print_modules(void) char buf[8]; printk("Modules linked in:"); - list_for_each_entry(mod, &modules, list) + /* Most callers should already have preempt disabled, but make sure */ + preempt_disable(); + list_for_each_entry_rcu(mod, &modules, list) printk(" %s%s", mod->name, module_flags(mod, buf)); + preempt_enable(); if (last_unloaded_module[0]) printk(" [last unloaded: %s]", last_unloaded_module); printk("\n"); diff --git a/kernel/panic.c b/kernel/panic.c index bda561ef3cdf..6513aac8e992 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -34,13 +34,6 @@ ATOMIC_NOTIFIER_HEAD(panic_notifier_list); EXPORT_SYMBOL(panic_notifier_list); -static int __init panic_setup(char *str) -{ - panic_timeout = simple_strtoul(str, NULL, 0); - return 1; -} -__setup("panic=", panic_setup); - static long no_blink(long time) { return 0; @@ -218,13 +211,6 @@ void add_taint(unsigned flag) } EXPORT_SYMBOL(add_taint); -static int __init pause_on_oops_setup(char *str) -{ - pause_on_oops = simple_strtoul(str, NULL, 0); - return 1; -} -__setup("pause_on_oops=", pause_on_oops_setup); - static void spin_msec(int msecs) { int i; @@ -384,3 +370,6 @@ void __stack_chk_fail(void) } EXPORT_SYMBOL(__stack_chk_fail); #endif + +core_param(panic, panic_timeout, int, 0644); +core_param(pause_on_oops, pause_on_oops, int, 0644); diff --git a/kernel/params.c b/kernel/params.c index afc46a23eb6d..b077f1b045d3 100644 --- a/kernel/params.c +++ b/kernel/params.c @@ -373,6 +373,8 @@ int param_get_string(char *buffer, struct kernel_param *kp) } /* sysfs output in /sys/modules/XYZ/parameters/ */ +#define to_module_attr(n) container_of(n, struct module_attribute, attr); +#define to_module_kobject(n) container_of(n, struct module_kobject, kobj); extern struct kernel_param __start___param[], __stop___param[]; @@ -384,6 +386,7 @@ struct param_attribute struct module_param_attrs { + unsigned int num; struct attribute_group grp; struct param_attribute attrs[0]; }; @@ -434,69 +437,84 @@ static ssize_t param_attr_store(struct module_attribute *mattr, #ifdef CONFIG_SYSFS /* - * param_sysfs_setup - setup sysfs support for one module or KBUILD_MODNAME - * @mk: struct module_kobject (contains parent kobject) - * @kparam: array of struct kernel_param, the actual parameter definitions - * @num_params: number of entries in array - * @name_skip: offset where the parameter name start in kparam[].name. Needed for built-in "modules" + * add_sysfs_param - add a parameter to sysfs + * @mk: struct module_kobject + * @kparam: the actual parameter definition to add to sysfs + * @name: name of parameter * - * Create a kobject for a (per-module) group of parameters, and create files - * in sysfs. A pointer to the param_kobject is returned on success, - * NULL if there's no parameter to export, or other ERR_PTR(err). + * Create a kobject if for a (per-module) parameter if mp NULL, and + * create file in sysfs. Returns an error on out of memory. Always cleans up + * if there's an error. */ -static __modinit struct module_param_attrs * -param_sysfs_setup(struct module_kobject *mk, - struct kernel_param *kparam, - unsigned int num_params, - unsigned int name_skip) +static __modinit int add_sysfs_param(struct module_kobject *mk, + struct kernel_param *kp, + const char *name) { - struct module_param_attrs *mp; - unsigned int valid_attrs = 0; - unsigned int i, size[2]; - struct param_attribute *pattr; - struct attribute **gattr; - int err; - - for (i=0; i<num_params; i++) { - if (kparam[i].perm) - valid_attrs++; + struct module_param_attrs *new; + struct attribute **attrs; + int err, num; + + /* We don't bother calling this with invisible parameters. */ + BUG_ON(!kp->perm); + + if (!mk->mp) { + num = 0; + attrs = NULL; + } else { + num = mk->mp->num; + attrs = mk->mp->grp.attrs; } - if (!valid_attrs) - return NULL; - - size[0] = ALIGN(sizeof(*mp) + - valid_attrs * sizeof(mp->attrs[0]), - sizeof(mp->grp.attrs[0])); - size[1] = (valid_attrs + 1) * sizeof(mp->grp.attrs[0]); - - mp = kzalloc(size[0] + size[1], GFP_KERNEL); - if (!mp) - return ERR_PTR(-ENOMEM); + /* Enlarge. */ + new = krealloc(mk->mp, + sizeof(*mk->mp) + sizeof(mk->mp->attrs[0]) * (num+1), + GFP_KERNEL); + if (!new) { + kfree(mk->mp); + err = -ENOMEM; + goto fail; + } + attrs = krealloc(attrs, sizeof(new->grp.attrs[0])*(num+2), GFP_KERNEL); + if (!attrs) { + err = -ENOMEM; + goto fail_free_new; + } - mp->grp.name = "parameters"; - mp->grp.attrs = (void *)mp + size[0]; + /* Sysfs wants everything zeroed. */ + memset(new, 0, sizeof(*new)); + memset(&new->attrs[num], 0, sizeof(new->attrs[num])); + memset(&attrs[num], 0, sizeof(attrs[num])); + new->grp.name = "parameters"; + new->grp.attrs = attrs; + + /* Tack new one on the end. */ + new->attrs[num].param = kp; + new->attrs[num].mattr.show = param_attr_show; + new->attrs[num].mattr.store = param_attr_store; + new->attrs[num].mattr.attr.name = (char *)name; + new->attrs[num].mattr.attr.mode = kp->perm; + new->num = num+1; + + /* Fix up all the pointers, since krealloc can move us */ + for (num = 0; num < new->num; num++) + new->grp.attrs[num] = &new->attrs[num].mattr.attr; + new->grp.attrs[num] = NULL; + + mk->mp = new; + return 0; - pattr = &mp->attrs[0]; - gattr = &mp->grp.attrs[0]; - for (i = 0; i < num_params; i++) { - struct kernel_param *kp = &kparam[i]; - if (kp->perm) { - pattr->param = kp; - pattr->mattr.show = param_attr_show; - pattr->mattr.store = param_attr_store; - pattr->mattr.attr.name = (char *)&kp->name[name_skip]; - pattr->mattr.attr.mode = kp->perm; - *(gattr++) = &(pattr++)->mattr.attr; - } - } - *gattr = NULL; +fail_free_new: + kfree(new); +fail: + mk->mp = NULL; + return err; +} - if ((err = sysfs_create_group(&mk->kobj, &mp->grp))) { - kfree(mp); - return ERR_PTR(err); - } - return mp; +static void free_module_param_attrs(struct module_kobject *mk) +{ + kfree(mk->mp->grp.attrs); + kfree(mk->mp); + mk->mp = NULL; } #ifdef CONFIG_MODULES @@ -506,21 +524,33 @@ param_sysfs_setup(struct module_kobject *mk, * @kparam: module parameters (array) * @num_params: number of module parameters * - * Adds sysfs entries for module parameters, and creates a link from - * /sys/module/[mod->name]/parameters to /sys/parameters/[mod->name]/ + * Adds sysfs entries for module parameters under + * /sys/module/[mod->name]/parameters/ */ int module_param_sysfs_setup(struct module *mod, struct kernel_param *kparam, unsigned int num_params) { - struct module_param_attrs *mp; + int i, err; + bool params = false; + + for (i = 0; i < num_params; i++) { + if (kparam[i].perm == 0) + continue; + err = add_sysfs_param(&mod->mkobj, &kparam[i], kparam[i].name); + if (err) + return err; + params = true; + } - mp = param_sysfs_setup(&mod->mkobj, kparam, num_params, 0); - if (IS_ERR(mp)) - return PTR_ERR(mp); + if (!params) + return 0; - mod->param_attrs = mp; - return 0; + /* Create the param group. */ + err = sysfs_create_group(&mod->mkobj.kobj, &mod->mkobj.mp->grp); + if (err) + free_module_param_attrs(&mod->mkobj); + return err; } /* @@ -532,43 +562,55 @@ int module_param_sysfs_setup(struct module *mod, */ void module_param_sysfs_remove(struct module *mod) { - if (mod->param_attrs) { - sysfs_remove_group(&mod->mkobj.kobj, - &mod->param_attrs->grp); + if (mod->mkobj.mp) { + sysfs_remove_group(&mod->mkobj.kobj, &mod->mkobj.mp->grp); /* We are positive that no one is using any param * attrs at this point. Deallocate immediately. */ - kfree(mod->param_attrs); - mod->param_attrs = NULL; + free_module_param_attrs(&mod->mkobj); } } #endif -/* - * kernel_param_sysfs_setup - wrapper for built-in params support - */ -static void __init kernel_param_sysfs_setup(const char *name, - struct kernel_param *kparam, - unsigned int num_params, - unsigned int name_skip) +static void __init kernel_add_sysfs_param(const char *name, + struct kernel_param *kparam, + unsigned int name_skip) { struct module_kobject *mk; - int ret; + struct kobject *kobj; + int err; - mk = kzalloc(sizeof(struct module_kobject), GFP_KERNEL); - BUG_ON(!mk); - - mk->mod = THIS_MODULE; - mk->kobj.kset = module_kset; - ret = kobject_init_and_add(&mk->kobj, &module_ktype, NULL, "%s", name); - if (ret) { - kobject_put(&mk->kobj); - printk(KERN_ERR "Module '%s' failed to be added to sysfs, " - "error number %d\n", name, ret); - printk(KERN_ERR "The system will be unstable now.\n"); - return; + kobj = kset_find_obj(module_kset, name); + if (kobj) { + /* We already have one. Remove params so we can add more. */ + mk = to_module_kobject(kobj); + /* We need to remove it before adding parameters. */ + sysfs_remove_group(&mk->kobj, &mk->mp->grp); + } else { + mk = kzalloc(sizeof(struct module_kobject), GFP_KERNEL); + BUG_ON(!mk); + + mk->mod = THIS_MODULE; + mk->kobj.kset = module_kset; + err = kobject_init_and_add(&mk->kobj, &module_ktype, NULL, + "%s", name); + if (err) { + kobject_put(&mk->kobj); + printk(KERN_ERR "Module '%s' failed add to sysfs, " + "error number %d\n", name, err); + printk(KERN_ERR "The system will be unstable now.\n"); + return; + } + /* So that exit path is even. */ + kobject_get(&mk->kobj); } - param_sysfs_setup(mk, kparam, num_params, name_skip); + + /* These should not fail at boot. */ + err = add_sysfs_param(mk, kparam, kparam->name + name_skip); + BUG_ON(err); + err = sysfs_create_group(&mk->kobj, &mk->mp->grp); + BUG_ON(err); kobject_uevent(&mk->kobj, KOBJ_ADD); + kobject_put(&mk->kobj); } /* @@ -579,60 +621,36 @@ static void __init kernel_param_sysfs_setup(const char *name, * The "module" name (KBUILD_MODNAME) is stored before a dot, the * "parameter" name is stored behind a dot in kernel_param->name. So, * extract the "module" name for all built-in kernel_param-eters, - * and for all who have the same, call kernel_param_sysfs_setup. + * and for all who have the same, call kernel_add_sysfs_param. */ static void __init param_sysfs_builtin(void) { - struct kernel_param *kp, *kp_begin = NULL; - unsigned int i, name_len, count = 0; - char modname[MODULE_NAME_LEN + 1] = ""; + struct kernel_param *kp; + unsigned int name_len; + char modname[MODULE_NAME_LEN]; - for (i=0; i < __stop___param - __start___param; i++) { + for (kp = __start___param; kp < __stop___param; kp++) { char *dot; - size_t max_name_len; - kp = &__start___param[i]; - max_name_len = - min_t(size_t, MODULE_NAME_LEN, strlen(kp->name)); + if (kp->perm == 0) + continue; - dot = memchr(kp->name, '.', max_name_len); + dot = strchr(kp->name, '.'); if (!dot) { - DEBUGP("couldn't find period in first %d characters " - "of %s\n", MODULE_NAME_LEN, kp->name); - continue; - } - name_len = dot - kp->name; - - /* new kbuild_modname? */ - if (strlen(modname) != name_len - || strncmp(modname, kp->name, name_len) != 0) { - /* add a new kobject for previous kernel_params. */ - if (count) - kernel_param_sysfs_setup(modname, - kp_begin, - count, - strlen(modname)+1); - - strncpy(modname, kp->name, name_len); - modname[name_len] = '\0'; - count = 0; - kp_begin = kp; + /* This happens for core_param() */ + strcpy(modname, "kernel"); + name_len = 0; + } else { + name_len = dot - kp->name + 1; + strlcpy(modname, kp->name, name_len); } - count++; + kernel_add_sysfs_param(modname, kp, name_len); } - - /* last kernel_params need to be registered as well */ - if (count) - kernel_param_sysfs_setup(modname, kp_begin, count, - strlen(modname)+1); } /* module-related sysfs stuff */ -#define to_module_attr(n) container_of(n, struct module_attribute, attr); -#define to_module_kobject(n) container_of(n, struct module_kobject, kobj); - static ssize_t module_attr_show(struct kobject *kobj, struct attribute *attr, char *buf) diff --git a/kernel/rcupdate.c b/kernel/rcupdate.c index 467d5940f624..ad63af8b2521 100644 --- a/kernel/rcupdate.c +++ b/kernel/rcupdate.c @@ -119,18 +119,19 @@ static void _rcu_barrier(enum rcu_barrier type) /* Take cpucontrol mutex to protect against CPU hotplug */ mutex_lock(&rcu_barrier_mutex); init_completion(&rcu_barrier_completion); - atomic_set(&rcu_barrier_cpu_count, 0); /* - * The queueing of callbacks in all CPUs must be atomic with - * respect to RCU, otherwise one CPU may queue a callback, - * wait for a grace period, decrement barrier count and call - * complete(), while other CPUs have not yet queued anything. - * So, we need to make sure that grace periods cannot complete - * until all the callbacks are queued. + * Initialize rcu_barrier_cpu_count to 1, then invoke + * rcu_barrier_func() on each CPU, so that each CPU also has + * incremented rcu_barrier_cpu_count. Only then is it safe to + * decrement rcu_barrier_cpu_count -- otherwise the first CPU + * might complete its grace period before all of the other CPUs + * did their increment, causing this function to return too + * early. */ - rcu_read_lock(); + atomic_set(&rcu_barrier_cpu_count, 1); on_each_cpu(rcu_barrier_func, (void *)type, 1); - rcu_read_unlock(); + if (atomic_dec_and_test(&rcu_barrier_cpu_count)) + complete(&rcu_barrier_completion); wait_for_completion(&rcu_barrier_completion); mutex_unlock(&rcu_barrier_mutex); } diff --git a/kernel/sched.c b/kernel/sched.c index d906f72b42d2..945a97b9600d 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -819,6 +819,13 @@ const_debug unsigned int sysctl_sched_nr_migrate = 32; unsigned int sysctl_sched_shares_ratelimit = 250000; /* + * Inject some fuzzyness into changing the per-cpu group shares + * this avoids remote rq-locks at the expense of fairness. + * default: 4 + */ +unsigned int sysctl_sched_shares_thresh = 4; + +/* * period over which we measure -rt task cpu usage in us. * default: 1s */ @@ -1454,8 +1461,8 @@ static void __set_se_shares(struct sched_entity *se, unsigned long shares); * Calculate and set the cpu's group shares. */ static void -__update_group_shares_cpu(struct task_group *tg, int cpu, - unsigned long sd_shares, unsigned long sd_rq_weight) +update_group_shares_cpu(struct task_group *tg, int cpu, + unsigned long sd_shares, unsigned long sd_rq_weight) { int boost = 0; unsigned long shares; @@ -1486,19 +1493,23 @@ __update_group_shares_cpu(struct task_group *tg, int cpu, * */ shares = (sd_shares * rq_weight) / (sd_rq_weight + 1); + shares = clamp_t(unsigned long, shares, MIN_SHARES, MAX_SHARES); - /* - * record the actual number of shares, not the boosted amount. - */ - tg->cfs_rq[cpu]->shares = boost ? 0 : shares; - tg->cfs_rq[cpu]->rq_weight = rq_weight; + if (abs(shares - tg->se[cpu]->load.weight) > + sysctl_sched_shares_thresh) { + struct rq *rq = cpu_rq(cpu); + unsigned long flags; - if (shares < MIN_SHARES) - shares = MIN_SHARES; - else if (shares > MAX_SHARES) - shares = MAX_SHARES; + spin_lock_irqsave(&rq->lock, flags); + /* + * record the actual number of shares, not the boosted amount. + */ + tg->cfs_rq[cpu]->shares = boost ? 0 : shares; + tg->cfs_rq[cpu]->rq_weight = rq_weight; - __set_se_shares(tg->se[cpu], shares); + __set_se_shares(tg->se[cpu], shares); + spin_unlock_irqrestore(&rq->lock, flags); + } } /* @@ -1527,14 +1538,8 @@ static int tg_shares_up(struct task_group *tg, void *data) if (!rq_weight) rq_weight = cpus_weight(sd->span) * NICE_0_LOAD; - for_each_cpu_mask(i, sd->span) { - struct rq *rq = cpu_rq(i); - unsigned long flags; - - spin_lock_irqsave(&rq->lock, flags); - __update_group_shares_cpu(tg, i, shares, rq_weight); - spin_unlock_irqrestore(&rq->lock, flags); - } + for_each_cpu_mask(i, sd->span) + update_group_shares_cpu(tg, i, shares, rq_weight); return 0; } @@ -4443,12 +4448,8 @@ need_resched_nonpreemptible: if (sched_feat(HRTICK)) hrtick_clear(rq); - /* - * Do the rq-clock update outside the rq lock: - */ - local_irq_disable(); + spin_lock_irq(&rq->lock); update_rq_clock(rq); - spin_lock(&rq->lock); clear_tsk_need_resched(prev); if (prev->state && !(preempt_count() & PREEMPT_ACTIVE)) { diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index f604dae71316..9573c33688b8 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -73,6 +73,8 @@ unsigned int sysctl_sched_wakeup_granularity = 5000000UL; const_debug unsigned int sysctl_sched_migration_cost = 500000UL; +static const struct sched_class fair_sched_class; + /************************************************************** * CFS operations on generic schedulable entities: */ @@ -334,7 +336,7 @@ int sched_nr_latency_handler(struct ctl_table *table, int write, #endif /* - * delta *= w / rw + * delta *= P[w / rw] */ static inline unsigned long calc_delta_weight(unsigned long delta, struct sched_entity *se) @@ -348,15 +350,13 @@ calc_delta_weight(unsigned long delta, struct sched_entity *se) } /* - * delta *= rw / w + * delta /= w */ static inline unsigned long calc_delta_fair(unsigned long delta, struct sched_entity *se) { - for_each_sched_entity(se) { - delta = calc_delta_mine(delta, - cfs_rq_of(se)->load.weight, &se->load); - } + if (unlikely(se->load.weight != NICE_0_LOAD)) + delta = calc_delta_mine(delta, NICE_0_LOAD, &se->load); return delta; } @@ -386,26 +386,26 @@ static u64 __sched_period(unsigned long nr_running) * We calculate the wall-time slice from the period by taking a part * proportional to the weight. * - * s = p*w/rw + * s = p*P[w/rw] */ static u64 sched_slice(struct cfs_rq *cfs_rq, struct sched_entity *se) { - return calc_delta_weight(__sched_period(cfs_rq->nr_running), se); + unsigned long nr_running = cfs_rq->nr_running; + + if (unlikely(!se->on_rq)) + nr_running++; + + return calc_delta_weight(__sched_period(nr_running), se); } /* * We calculate the vruntime slice of a to be inserted task * - * vs = s*rw/w = p + * vs = s/w */ -static u64 sched_vslice_add(struct cfs_rq *cfs_rq, struct sched_entity *se) +static u64 sched_vslice(struct cfs_rq *cfs_rq, struct sched_entity *se) { - unsigned long nr_running = cfs_rq->nr_running; - - if (!se->on_rq) - nr_running++; - - return __sched_period(nr_running); + return calc_delta_fair(sched_slice(cfs_rq, se), se); } /* @@ -628,7 +628,7 @@ place_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int initial) * stays open at the end. */ if (initial && sched_feat(START_DEBIT)) - vruntime += sched_vslice_add(cfs_rq, se); + vruntime += sched_vslice(cfs_rq, se); if (!initial) { /* sleeps upto a single latency don't count. */ @@ -748,7 +748,7 @@ pick_next(struct cfs_rq *cfs_rq, struct sched_entity *se) struct rq *rq = rq_of(cfs_rq); u64 pair_slice = rq->clock - cfs_rq->pair_start; - if (!cfs_rq->next || pair_slice > sched_slice(cfs_rq, cfs_rq->next)) { + if (!cfs_rq->next || pair_slice > sysctl_sched_min_granularity) { cfs_rq->pair_start = rq->clock; return se; } @@ -849,11 +849,31 @@ static void hrtick_start_fair(struct rq *rq, struct task_struct *p) hrtick_start(rq, delta); } } + +/* + * called from enqueue/dequeue and updates the hrtick when the + * current task is from our class and nr_running is low enough + * to matter. + */ +static void hrtick_update(struct rq *rq) +{ + struct task_struct *curr = rq->curr; + + if (curr->sched_class != &fair_sched_class) + return; + + if (cfs_rq_of(&curr->se)->nr_running < sched_nr_latency) + hrtick_start_fair(rq, curr); +} #else /* !CONFIG_SCHED_HRTICK */ static inline void hrtick_start_fair(struct rq *rq, struct task_struct *p) { } + +static inline void hrtick_update(struct rq *rq) +{ +} #endif /* @@ -874,7 +894,7 @@ static void enqueue_task_fair(struct rq *rq, struct task_struct *p, int wakeup) wakeup = 1; } - hrtick_start_fair(rq, rq->curr); + hrtick_update(rq); } /* @@ -896,7 +916,7 @@ static void dequeue_task_fair(struct rq *rq, struct task_struct *p, int sleep) sleep = 1; } - hrtick_start_fair(rq, rq->curr); + hrtick_update(rq); } /* @@ -1002,8 +1022,6 @@ static inline int wake_idle(int cpu, struct task_struct *p) #ifdef CONFIG_SMP -static const struct sched_class fair_sched_class; - #ifdef CONFIG_FAIR_GROUP_SCHED /* * effective_load() calculates the load change as seen from the root_task_group diff --git a/kernel/sched_features.h b/kernel/sched_features.h index 7c9e8f4a049f..fda016218296 100644 --- a/kernel/sched_features.h +++ b/kernel/sched_features.h @@ -5,7 +5,7 @@ SCHED_FEAT(START_DEBIT, 1) SCHED_FEAT(AFFINE_WAKEUPS, 1) SCHED_FEAT(CACHE_HOT_BUDDY, 1) SCHED_FEAT(SYNC_WAKEUPS, 1) -SCHED_FEAT(HRTICK, 1) +SCHED_FEAT(HRTICK, 0) SCHED_FEAT(DOUBLE_TICK, 0) SCHED_FEAT(ASYM_GRAN, 1) SCHED_FEAT(LB_BIAS, 1) diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h index b8c156979cf2..2df9d297d292 100644 --- a/kernel/sched_stats.h +++ b/kernel/sched_stats.h @@ -9,7 +9,7 @@ static int show_schedstat(struct seq_file *seq, void *v) { int cpu; - int mask_len = NR_CPUS/32 * 9; + int mask_len = DIV_ROUND_UP(NR_CPUS, 32) * 9; char *mask_str = kmalloc(mask_len, GFP_KERNEL); if (mask_str == NULL) diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c index af3c7cea258b..8aff79d90ddc 100644 --- a/kernel/stop_machine.c +++ b/kernel/stop_machine.c @@ -37,9 +37,13 @@ struct stop_machine_data { /* Like num_online_cpus(), but hotplug cpu uses us, so we need this. */ static unsigned int num_threads; static atomic_t thread_ack; -static struct completion finished; static DEFINE_MUTEX(lock); +static struct workqueue_struct *stop_machine_wq; +static struct stop_machine_data active, idle; +static const cpumask_t *active_cpus; +static void *stop_machine_work; + static void set_state(enum stopmachine_state newstate) { /* Reset ack counter. */ @@ -51,21 +55,26 @@ static void set_state(enum stopmachine_state newstate) /* Last one to ack a state moves to the next state. */ static void ack_state(void) { - if (atomic_dec_and_test(&thread_ack)) { - /* If we're the last one to ack the EXIT, we're finished. */ - if (state == STOPMACHINE_EXIT) - complete(&finished); - else - set_state(state + 1); - } + if (atomic_dec_and_test(&thread_ack)) + set_state(state + 1); } -/* This is the actual thread which stops the CPU. It exits by itself rather - * than waiting for kthread_stop(), because it's easier for hotplug CPU. */ -static int stop_cpu(struct stop_machine_data *smdata) +/* This is the actual function which stops the CPU. It runs + * in the context of a dedicated stopmachine workqueue. */ +static void stop_cpu(struct work_struct *unused) { enum stopmachine_state curstate = STOPMACHINE_NONE; - + struct stop_machine_data *smdata = &idle; + int cpu = smp_processor_id(); + int err; + + if (!active_cpus) { + if (cpu == first_cpu(cpu_online_map)) + smdata = &active; + } else { + if (cpu_isset(cpu, *active_cpus)) + smdata = &active; + } /* Simple state machine */ do { /* Chill out and ensure we re-read stopmachine_state. */ @@ -78,9 +87,11 @@ static int stop_cpu(struct stop_machine_data *smdata) hard_irq_disable(); break; case STOPMACHINE_RUN: - /* |= allows error detection if functions on - * multiple CPUs. */ - smdata->fnret |= smdata->fn(smdata->data); + /* On multiple CPUs only a single error code + * is needed to tell that something failed. */ + err = smdata->fn(smdata->data); + if (err) + smdata->fnret = err; break; default: break; @@ -90,7 +101,6 @@ static int stop_cpu(struct stop_machine_data *smdata) } while (curstate != STOPMACHINE_EXIT); local_irq_enable(); - do_exit(0); } /* Callback for CPUs which aren't supposed to do anything. */ @@ -101,78 +111,34 @@ static int chill(void *unused) int __stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus) { - int i, err; - struct stop_machine_data active, idle; - struct task_struct **threads; + struct work_struct *sm_work; + int i; + /* Set up initial state. */ + mutex_lock(&lock); + num_threads = num_online_cpus(); + active_cpus = cpus; active.fn = fn; active.data = data; active.fnret = 0; idle.fn = chill; idle.data = NULL; - /* This could be too big for stack on large machines. */ - threads = kcalloc(NR_CPUS, sizeof(threads[0]), GFP_KERNEL); - if (!threads) - return -ENOMEM; - - /* Set up initial state. */ - mutex_lock(&lock); - init_completion(&finished); - num_threads = num_online_cpus(); set_state(STOPMACHINE_PREPARE); - for_each_online_cpu(i) { - struct stop_machine_data *smdata = &idle; - struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 }; - - if (!cpus) { - if (i == first_cpu(cpu_online_map)) - smdata = &active; - } else { - if (cpu_isset(i, *cpus)) - smdata = &active; - } - - threads[i] = kthread_create((void *)stop_cpu, smdata, "kstop%u", - i); - if (IS_ERR(threads[i])) { - err = PTR_ERR(threads[i]); - threads[i] = NULL; - goto kill_threads; - } - - /* Place it onto correct cpu. */ - kthread_bind(threads[i], i); - - /* Make it highest prio. */ - if (sched_setscheduler_nocheck(threads[i], SCHED_FIFO, ¶m)) - BUG(); - } - - /* We've created all the threads. Wake them all: hold this CPU so one + /* Schedule the stop_cpu work on all cpus: hold this CPU so one * doesn't hit this CPU until we're ready. */ get_cpu(); - for_each_online_cpu(i) - wake_up_process(threads[i]); - + for_each_online_cpu(i) { + sm_work = percpu_ptr(stop_machine_work, i); + INIT_WORK(sm_work, stop_cpu); + queue_work_on(i, stop_machine_wq, sm_work); + } /* This will release the thread on our CPU. */ put_cpu(); - wait_for_completion(&finished); + flush_workqueue(stop_machine_wq); mutex_unlock(&lock); - - kfree(threads); - return active.fnret; - -kill_threads: - for_each_online_cpu(i) - if (threads[i]) - kthread_stop(threads[i]); - mutex_unlock(&lock); - - kfree(threads); - return err; } int stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus) @@ -187,3 +153,11 @@ int stop_machine(int (*fn)(void *), void *data, const cpumask_t *cpus) return ret; } EXPORT_SYMBOL_GPL(stop_machine); + +static int __init stop_machine_init(void) +{ + stop_machine_wq = create_rt_workqueue("kstop"); + stop_machine_work = alloc_percpu(struct work_struct); + return 0; +} +early_initcall(stop_machine_init); diff --git a/kernel/sysctl.c b/kernel/sysctl.c index b3cc73931d1f..a13bd4dfaeb1 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -276,6 +276,16 @@ static struct ctl_table kern_table[] = { }, { .ctl_name = CTL_UNNUMBERED, + .procname = "sched_shares_thresh", + .data = &sysctl_sched_shares_thresh, + .maxlen = sizeof(unsigned int), + .mode = 0644, + .proc_handler = &proc_dointvec_minmax, + .strategy = &sysctl_intvec, + .extra1 = &zero, + }, + { + .ctl_name = CTL_UNNUMBERED, .procname = "sched_child_runs_first", .data = &sysctl_sched_child_runs_first, .maxlen = sizeof(unsigned int), diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 0581c11fe6c6..727c1ae0517a 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -567,11 +567,21 @@ static void tick_nohz_switch_to_nohz(void) static void tick_nohz_kick_tick(int cpu) { struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu); + ktime_t delta, now; if (!ts->tick_stopped) return; - tick_nohz_restart(ts, ktime_get()); + /* + * Do not touch the tick device, when the next expiry is either + * already reached or less/equal than the tick period. + */ + now = ktime_get(); + delta = ktime_sub(ts->sched_timer.expires, now); + if (delta.tv64 <= tick_period.tv64) + return; + + tick_nohz_restart(ts, now); } #else diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 714afad46539..f928f2a87b9b 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -62,6 +62,7 @@ struct workqueue_struct { const char *name; int singlethread; int freezeable; /* Freeze threads during suspend */ + int rt; #ifdef CONFIG_LOCKDEP struct lockdep_map lockdep_map; #endif @@ -766,6 +767,7 @@ init_cpu_workqueue(struct workqueue_struct *wq, int cpu) static int create_workqueue_thread(struct cpu_workqueue_struct *cwq, int cpu) { + struct sched_param param = { .sched_priority = MAX_RT_PRIO-1 }; struct workqueue_struct *wq = cwq->wq; const char *fmt = is_single_threaded(wq) ? "%s" : "%s/%d"; struct task_struct *p; @@ -781,7 +783,8 @@ static int create_workqueue_thread(struct cpu_workqueue_struct *cwq, int cpu) */ if (IS_ERR(p)) return PTR_ERR(p); - + if (cwq->wq->rt) + sched_setscheduler_nocheck(p, SCHED_FIFO, ¶m); cwq->thread = p; return 0; @@ -801,6 +804,7 @@ static void start_workqueue_thread(struct cpu_workqueue_struct *cwq, int cpu) struct workqueue_struct *__create_workqueue_key(const char *name, int singlethread, int freezeable, + int rt, struct lock_class_key *key, const char *lock_name) { @@ -822,6 +826,7 @@ struct workqueue_struct *__create_workqueue_key(const char *name, lockdep_init_map(&wq->lockdep_map, lock_name, key, 0); wq->singlethread = singlethread; wq->freezeable = freezeable; + wq->rt = rt; INIT_LIST_HEAD(&wq->list); if (singlethread) { diff --git a/lib/bitmap.c b/lib/bitmap.c index 482df94ea21e..1338469ac849 100644 --- a/lib/bitmap.c +++ b/lib/bitmap.c @@ -996,3 +996,25 @@ int bitmap_allocate_region(unsigned long *bitmap, int pos, int order) return 0; } EXPORT_SYMBOL(bitmap_allocate_region); + +/** + * bitmap_copy_le - copy a bitmap, putting the bits into little-endian order. + * @dst: destination buffer + * @src: bitmap to copy + * @nbits: number of bits in the bitmap + * + * Require nbits % BITS_PER_LONG == 0. + */ +void bitmap_copy_le(void *dst, const unsigned long *src, int nbits) +{ + unsigned long *d = dst; + int i; + + for (i = 0; i < nbits/BITS_PER_LONG; i++) { + if (BITS_PER_LONG == 64) + d[i] = cpu_to_le64(src[i]); + else + d[i] = cpu_to_le32(src[i]); + } +} +EXPORT_SYMBOL(bitmap_copy_le); diff --git a/mm/memcontrol.c b/mm/memcontrol.c index d4a92b63e98e..866dcc7eeb0c 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -1088,7 +1088,6 @@ mem_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cont) int node; if (unlikely((cont->parent) == NULL)) { - page_cgroup_init(); mem = &init_mem_cgroup; } else { mem = mem_cgroup_alloc(); diff --git a/mm/page_cgroup.c b/mm/page_cgroup.c index 5d86550701f2..f59d797dc5a9 100644 --- a/mm/page_cgroup.c +++ b/mm/page_cgroup.c @@ -4,7 +4,10 @@ #include <linux/bit_spinlock.h> #include <linux/page_cgroup.h> #include <linux/hash.h> +#include <linux/slab.h> #include <linux/memory.h> +#include <linux/vmalloc.h> +#include <linux/cgroup.h> static void __meminit __init_page_cgroup(struct page_cgroup *pc, unsigned long pfn) @@ -66,6 +69,9 @@ void __init page_cgroup_init(void) int nid, fail; + if (mem_cgroup_subsys.disabled) + return; + for_each_online_node(nid) { fail = alloc_node_page_cgroup(nid); if (fail) @@ -106,9 +112,14 @@ int __meminit init_section_page_cgroup(unsigned long pfn) nid = page_to_nid(pfn_to_page(pfn)); table_size = sizeof(struct page_cgroup) * PAGES_PER_SECTION; - base = kmalloc_node(table_size, GFP_KERNEL, nid); - if (!base) - base = vmalloc_node(table_size, nid); + if (slab_is_available()) { + base = kmalloc_node(table_size, GFP_KERNEL, nid); + if (!base) + base = vmalloc_node(table_size, nid); + } else { + base = __alloc_bootmem_node_nopanic(NODE_DATA(nid), table_size, + PAGE_SIZE, __pa(MAX_DMA_ADDRESS)); + } if (!base) { printk(KERN_ERR "page cgroup allocation failure\n"); @@ -135,11 +146,16 @@ void __free_page_cgroup(unsigned long pfn) if (!ms || !ms->page_cgroup) return; base = ms->page_cgroup + pfn; - ms->page_cgroup = NULL; - if (is_vmalloc_addr(base)) + if (is_vmalloc_addr(base)) { vfree(base); - else - kfree(base); + ms->page_cgroup = NULL; + } else { + struct page *page = virt_to_page(base); + if (!PageReserved(page)) { /* Is bootmem ? */ + kfree(base); + ms->page_cgroup = NULL; + } + } } int online_page_cgroup(unsigned long start_pfn, @@ -213,6 +229,9 @@ void __init page_cgroup_init(void) unsigned long pfn; int fail = 0; + if (mem_cgroup_subsys.disabled) + return; + for (pfn = 0; !fail && pfn < max_pfn; pfn += PAGES_PER_SECTION) { if (!pfn_present(pfn)) continue; diff --git a/net/9p/Kconfig b/net/9p/Kconfig index ff34c5acc130..c42c0c400bf9 100644 --- a/net/9p/Kconfig +++ b/net/9p/Kconfig @@ -20,6 +20,12 @@ config NET_9P_VIRTIO This builds support for a transports between guest partitions and a host partition. +config NET_9P_RDMA + depends on NET_9P && INFINIBAND && EXPERIMENTAL + tristate "9P RDMA Transport (Experimental)" + help + This builds support for a RDMA transport. + config NET_9P_DEBUG bool "Debug information" depends on NET_9P diff --git a/net/9p/Makefile b/net/9p/Makefile index 1041b7bd12e2..198a640d53a6 100644 --- a/net/9p/Makefile +++ b/net/9p/Makefile @@ -1,5 +1,6 @@ obj-$(CONFIG_NET_9P) := 9pnet.o obj-$(CONFIG_NET_9P_VIRTIO) += 9pnet_virtio.o +obj-$(CONFIG_NET_9P_RDMA) += 9pnet_rdma.o 9pnet-objs := \ mod.o \ @@ -11,3 +12,6 @@ obj-$(CONFIG_NET_9P_VIRTIO) += 9pnet_virtio.o 9pnet_virtio-objs := \ trans_virtio.o \ + +9pnet_rdma-objs := \ + trans_rdma.o \ diff --git a/net/9p/client.c b/net/9p/client.c index bbac2f72b4d2..67717f69412e 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -159,6 +159,7 @@ static struct p9_req_t *p9_tag_alloc(struct p9_client *c, u16 tag) if (!c->reqs[row]) { printk(KERN_ERR "Couldn't grow tag array\n"); + spin_unlock_irqrestore(&c->lock, flags); return ERR_PTR(-ENOMEM); } for (col = 0; col < P9_ROW_MAXTAG; col++) { diff --git a/net/9p/protocol.c b/net/9p/protocol.c index 29be52439086..dcd7666824ba 100644 --- a/net/9p/protocol.c +++ b/net/9p/protocol.c @@ -53,6 +53,7 @@ static int p9pdu_writef(struct p9_fcall *pdu, int optional, const char *fmt, ...); +#ifdef CONFIG_NET_9P_DEBUG void p9pdu_dump(int way, struct p9_fcall *pdu) { @@ -81,6 +82,12 @@ p9pdu_dump(int way, struct p9_fcall *pdu) else P9_DPRINTK(P9_DEBUG_PKT, "]]](%d) %s\n", datalen, buf); } +#else +void +p9pdu_dump(int way, struct p9_fcall *pdu) +{ +} +#endif EXPORT_SYMBOL(p9pdu_dump); void p9stat_free(struct p9_wstat *stbuf) @@ -179,7 +186,7 @@ p9pdu_vreadf(struct p9_fcall *pdu, int optional, const char *fmt, va_list ap) } break; case 's':{ - char **ptr = va_arg(ap, char **); + char **sptr = va_arg(ap, char **); int16_t len; int size; @@ -189,17 +196,17 @@ p9pdu_vreadf(struct p9_fcall *pdu, int optional, const char *fmt, va_list ap) size = MAX(len, 0); - *ptr = kmalloc(size + 1, GFP_KERNEL); - if (*ptr == NULL) { + *sptr = kmalloc(size + 1, GFP_KERNEL); + if (*sptr == NULL) { errcode = -EFAULT; break; } - if (pdu_read(pdu, *ptr, size)) { + if (pdu_read(pdu, *sptr, size)) { errcode = -EFAULT; - kfree(*ptr); - *ptr = NULL; + kfree(*sptr); + *sptr = NULL; } else - (*ptr)[size] = 0; + (*sptr)[size] = 0; } break; case 'Q':{ @@ -373,13 +380,13 @@ p9pdu_vwritef(struct p9_fcall *pdu, int optional, const char *fmt, va_list ap) } break; case 's':{ - const char *ptr = va_arg(ap, const char *); + const char *sptr = va_arg(ap, const char *); int16_t len = 0; - if (ptr) - len = MIN(strlen(ptr), USHORT_MAX); + if (sptr) + len = MIN(strlen(sptr), USHORT_MAX); errcode = p9pdu_writef(pdu, optional, "w", len); - if (!errcode && pdu_write(pdu, ptr, len)) + if (!errcode && pdu_write(pdu, sptr, len)) errcode = -EFAULT; } break; @@ -419,7 +426,7 @@ p9pdu_vwritef(struct p9_fcall *pdu, int optional, const char *fmt, va_list ap) case 'U':{ int32_t count = va_arg(ap, int32_t); const char __user *udata = - va_arg(ap, const void *); + va_arg(ap, const void __user *); errcode = p9pdu_writef(pdu, optional, "d", count); if (!errcode && pdu_write_u(pdu, udata, count)) @@ -542,8 +549,10 @@ int p9pdu_finalize(struct p9_fcall *pdu) err = p9pdu_writef(pdu, 0, "d", size); pdu->size = size; +#ifdef CONFIG_NET_9P_DEBUG if ((p9_debug_level & P9_DEBUG_PKT) == P9_DEBUG_PKT) p9pdu_dump(0, pdu); +#endif P9_DPRINTK(P9_DEBUG_9P, ">>> size=%d type: %d tag: %d\n", pdu->size, pdu->id, pdu->tag); diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c index be65d8242fd2..1df0356f242b 100644 --- a/net/9p/trans_fd.c +++ b/net/9p/trans_fd.c @@ -678,11 +678,9 @@ static int p9_fd_request(struct p9_client *client, struct p9_req_t *req) static int p9_fd_cancel(struct p9_client *client, struct p9_req_t *req) { - struct p9_trans_fd *ts = client->trans; - struct p9_conn *m = ts->conn; int ret = 1; - P9_DPRINTK(P9_DEBUG_TRANS, "mux %p req %p\n", m, req); + P9_DPRINTK(P9_DEBUG_TRANS, "client %p req %p\n", client, req); spin_lock(&client->lock); list_del(&req->req_list); diff --git a/net/9p/trans_rdma.c b/net/9p/trans_rdma.c new file mode 100644 index 000000000000..8d6cc4777aae --- /dev/null +++ b/net/9p/trans_rdma.c @@ -0,0 +1,712 @@ +/* + * linux/fs/9p/trans_rdma.c + * + * RDMA transport layer based on the trans_fd.c implementation. + * + * Copyright (C) 2008 by Tom Tucker <tom@opengridcomputing.com> + * Copyright (C) 2006 by Russ Cox <rsc@swtch.com> + * Copyright (C) 2004-2005 by Latchesar Ionkov <lucho@ionkov.net> + * Copyright (C) 2004-2008 by Eric Van Hensbergen <ericvh@gmail.com> + * Copyright (C) 1997-2002 by Ron Minnich <rminnich@sarnoff.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to: + * Free Software Foundation + * 51 Franklin Street, Fifth Floor + * Boston, MA 02111-1301 USA + * + */ + +#include <linux/in.h> +#include <linux/module.h> +#include <linux/net.h> +#include <linux/ipv6.h> +#include <linux/kthread.h> +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/un.h> +#include <linux/uaccess.h> +#include <linux/inet.h> +#include <linux/idr.h> +#include <linux/file.h> +#include <linux/parser.h> +#include <linux/semaphore.h> +#include <net/9p/9p.h> +#include <net/9p/client.h> +#include <net/9p/transport.h> +#include <rdma/ib_verbs.h> +#include <rdma/rdma_cm.h> +#include <rdma/ib_verbs.h> + +#define P9_PORT 5640 +#define P9_RDMA_SQ_DEPTH 32 +#define P9_RDMA_RQ_DEPTH 32 +#define P9_RDMA_SEND_SGE 4 +#define P9_RDMA_RECV_SGE 4 +#define P9_RDMA_IRD 0 +#define P9_RDMA_ORD 0 +#define P9_RDMA_TIMEOUT 30000 /* 30 seconds */ +#define P9_RDMA_MAXSIZE (4*4096) /* Min SGE is 4, so we can + * safely advertise a maxsize + * of 64k */ + +#define P9_RDMA_MAX_SGE (P9_RDMA_MAXSIZE >> PAGE_SHIFT) +/** + * struct p9_trans_rdma - RDMA transport instance + * + * @state: tracks the transport state machine for connection setup and tear down + * @cm_id: The RDMA CM ID + * @pd: Protection Domain pointer + * @qp: Queue Pair pointer + * @cq: Completion Queue pointer + * @lkey: The local access only memory region key + * @timeout: Number of uSecs to wait for connection management events + * @sq_depth: The depth of the Send Queue + * @sq_sem: Semaphore for the SQ + * @rq_depth: The depth of the Receive Queue. + * @addr: The remote peer's address + * @req_lock: Protects the active request list + * @send_wait: Wait list when the SQ fills up + * @cm_done: Completion event for connection management tracking + */ +struct p9_trans_rdma { + enum { + P9_RDMA_INIT, + P9_RDMA_ADDR_RESOLVED, + P9_RDMA_ROUTE_RESOLVED, + P9_RDMA_CONNECTED, + P9_RDMA_FLUSHING, + P9_RDMA_CLOSING, + P9_RDMA_CLOSED, + } state; + struct rdma_cm_id *cm_id; + struct ib_pd *pd; + struct ib_qp *qp; + struct ib_cq *cq; + struct ib_mr *dma_mr; + u32 lkey; + long timeout; + int sq_depth; + struct semaphore sq_sem; + int rq_depth; + atomic_t rq_count; + struct sockaddr_in addr; + spinlock_t req_lock; + + struct completion cm_done; +}; + +/** + * p9_rdma_context - Keeps track of in-process WR + * + * @wc_op: The original WR op for when the CQE completes in error. + * @busa: Bus address to unmap when the WR completes + * @req: Keeps track of requests (send) + * @rc: Keepts track of replies (receive) + */ +struct p9_rdma_req; +struct p9_rdma_context { + enum ib_wc_opcode wc_op; + dma_addr_t busa; + union { + struct p9_req_t *req; + struct p9_fcall *rc; + }; +}; + +/** + * p9_rdma_opts - Collection of mount options + * @port: port of connection + * @sq_depth: The requested depth of the SQ. This really doesn't need + * to be any deeper than the number of threads used in the client + * @rq_depth: The depth of the RQ. Should be greater than or equal to SQ depth + * @timeout: Time to wait in msecs for CM events + */ +struct p9_rdma_opts { + short port; + int sq_depth; + int rq_depth; + long timeout; +}; + +/* + * Option Parsing (code inspired by NFS code) + */ +enum { + /* Options that take integer arguments */ + Opt_port, Opt_rq_depth, Opt_sq_depth, Opt_timeout, Opt_err, +}; + +static match_table_t tokens = { + {Opt_port, "port=%u"}, + {Opt_sq_depth, "sq=%u"}, + {Opt_rq_depth, "rq=%u"}, + {Opt_timeout, "timeout=%u"}, + {Opt_err, NULL}, +}; + +/** + * parse_options - parse mount options into session structure + * @options: options string passed from mount + * @opts: transport-specific structure to parse options into + * + * Returns 0 upon success, -ERRNO upon failure + */ +static int parse_opts(char *params, struct p9_rdma_opts *opts) +{ + char *p; + substring_t args[MAX_OPT_ARGS]; + int option; + char *options; + int ret; + + opts->port = P9_PORT; + opts->sq_depth = P9_RDMA_SQ_DEPTH; + opts->rq_depth = P9_RDMA_RQ_DEPTH; + opts->timeout = P9_RDMA_TIMEOUT; + + if (!params) + return 0; + + options = kstrdup(params, GFP_KERNEL); + if (!options) { + P9_DPRINTK(P9_DEBUG_ERROR, + "failed to allocate copy of option string\n"); + return -ENOMEM; + } + + while ((p = strsep(&options, ",")) != NULL) { + int token; + int r; + if (!*p) + continue; + token = match_token(p, tokens, args); + r = match_int(&args[0], &option); + if (r < 0) { + P9_DPRINTK(P9_DEBUG_ERROR, + "integer field, but no integer?\n"); + ret = r; + continue; + } + switch (token) { + case Opt_port: + opts->port = option; + break; + case Opt_sq_depth: + opts->sq_depth = option; + break; + case Opt_rq_depth: + opts->rq_depth = option; + break; + case Opt_timeout: + opts->timeout = option; + break; + default: + continue; + } + } + /* RQ must be at least as large as the SQ */ + opts->rq_depth = max(opts->rq_depth, opts->sq_depth); + kfree(options); + return 0; +} + +static int +p9_cm_event_handler(struct rdma_cm_id *id, struct rdma_cm_event *event) +{ + struct p9_client *c = id->context; + struct p9_trans_rdma *rdma = c->trans; + switch (event->event) { + case RDMA_CM_EVENT_ADDR_RESOLVED: + BUG_ON(rdma->state != P9_RDMA_INIT); + rdma->state = P9_RDMA_ADDR_RESOLVED; + break; + + case RDMA_CM_EVENT_ROUTE_RESOLVED: + BUG_ON(rdma->state != P9_RDMA_ADDR_RESOLVED); + rdma->state = P9_RDMA_ROUTE_RESOLVED; + break; + + case RDMA_CM_EVENT_ESTABLISHED: + BUG_ON(rdma->state != P9_RDMA_ROUTE_RESOLVED); + rdma->state = P9_RDMA_CONNECTED; + break; + + case RDMA_CM_EVENT_DISCONNECTED: + if (rdma) + rdma->state = P9_RDMA_CLOSED; + if (c) + c->status = Disconnected; + break; + + case RDMA_CM_EVENT_TIMEWAIT_EXIT: + break; + + case RDMA_CM_EVENT_ADDR_CHANGE: + case RDMA_CM_EVENT_ROUTE_ERROR: + case RDMA_CM_EVENT_DEVICE_REMOVAL: + case RDMA_CM_EVENT_MULTICAST_JOIN: + case RDMA_CM_EVENT_MULTICAST_ERROR: + case RDMA_CM_EVENT_REJECTED: + case RDMA_CM_EVENT_CONNECT_REQUEST: + case RDMA_CM_EVENT_CONNECT_RESPONSE: + case RDMA_CM_EVENT_CONNECT_ERROR: + case RDMA_CM_EVENT_ADDR_ERROR: + case RDMA_CM_EVENT_UNREACHABLE: + c->status = Disconnected; + rdma_disconnect(rdma->cm_id); + break; + default: + BUG(); + } + complete(&rdma->cm_done); + return 0; +} + +static void +handle_recv(struct p9_client *client, struct p9_trans_rdma *rdma, + struct p9_rdma_context *c, enum ib_wc_status status, u32 byte_len) +{ + struct p9_req_t *req; + int err = 0; + int16_t tag; + + req = NULL; + ib_dma_unmap_single(rdma->cm_id->device, c->busa, client->msize, + DMA_FROM_DEVICE); + + if (status != IB_WC_SUCCESS) + goto err_out; + + err = p9_parse_header(c->rc, NULL, NULL, &tag, 1); + if (err) + goto err_out; + + req = p9_tag_lookup(client, tag); + if (!req) + goto err_out; + + req->rc = c->rc; + p9_client_cb(client, req); + + return; + + err_out: + P9_DPRINTK(P9_DEBUG_ERROR, "req %p err %d status %d\n", + req, err, status); + rdma->state = P9_RDMA_FLUSHING; + client->status = Disconnected; + return; +} + +static void +handle_send(struct p9_client *client, struct p9_trans_rdma *rdma, + struct p9_rdma_context *c, enum ib_wc_status status, u32 byte_len) +{ + ib_dma_unmap_single(rdma->cm_id->device, + c->busa, c->req->tc->size, + DMA_TO_DEVICE); +} + +static void qp_event_handler(struct ib_event *event, void *context) +{ + P9_DPRINTK(P9_DEBUG_ERROR, "QP event %d context %p\n", event->event, + context); +} + +static void cq_comp_handler(struct ib_cq *cq, void *cq_context) +{ + struct p9_client *client = cq_context; + struct p9_trans_rdma *rdma = client->trans; + int ret; + struct ib_wc wc; + + ib_req_notify_cq(rdma->cq, IB_CQ_NEXT_COMP); + while ((ret = ib_poll_cq(cq, 1, &wc)) > 0) { + struct p9_rdma_context *c = (void *) (unsigned long) wc.wr_id; + + switch (c->wc_op) { + case IB_WC_RECV: + atomic_dec(&rdma->rq_count); + handle_recv(client, rdma, c, wc.status, wc.byte_len); + break; + + case IB_WC_SEND: + handle_send(client, rdma, c, wc.status, wc.byte_len); + up(&rdma->sq_sem); + break; + + default: + printk(KERN_ERR "9prdma: unexpected completion type, " + "c->wc_op=%d, wc.opcode=%d, status=%d\n", + c->wc_op, wc.opcode, wc.status); + break; + } + kfree(c); + } +} + +static void cq_event_handler(struct ib_event *e, void *v) +{ + P9_DPRINTK(P9_DEBUG_ERROR, "CQ event %d context %p\n", e->event, v); +} + +static void rdma_destroy_trans(struct p9_trans_rdma *rdma) +{ + if (!rdma) + return; + + if (rdma->dma_mr && !IS_ERR(rdma->dma_mr)) + ib_dereg_mr(rdma->dma_mr); + + if (rdma->qp && !IS_ERR(rdma->qp)) + ib_destroy_qp(rdma->qp); + + if (rdma->pd && !IS_ERR(rdma->pd)) + ib_dealloc_pd(rdma->pd); + + if (rdma->cq && !IS_ERR(rdma->cq)) + ib_destroy_cq(rdma->cq); + + if (rdma->cm_id && !IS_ERR(rdma->cm_id)) + rdma_destroy_id(rdma->cm_id); + + kfree(rdma); +} + +static int +post_recv(struct p9_client *client, struct p9_rdma_context *c) +{ + struct p9_trans_rdma *rdma = client->trans; + struct ib_recv_wr wr, *bad_wr; + struct ib_sge sge; + + c->busa = ib_dma_map_single(rdma->cm_id->device, + c->rc->sdata, client->msize, + DMA_FROM_DEVICE); + if (ib_dma_mapping_error(rdma->cm_id->device, c->busa)) + goto error; + + sge.addr = c->busa; + sge.length = client->msize; + sge.lkey = rdma->lkey; + + wr.next = NULL; + c->wc_op = IB_WC_RECV; + wr.wr_id = (unsigned long) c; + wr.sg_list = &sge; + wr.num_sge = 1; + return ib_post_recv(rdma->qp, &wr, &bad_wr); + + error: + P9_DPRINTK(P9_DEBUG_ERROR, "EIO\n"); + return -EIO; +} + +static int rdma_request(struct p9_client *client, struct p9_req_t *req) +{ + struct p9_trans_rdma *rdma = client->trans; + struct ib_send_wr wr, *bad_wr; + struct ib_sge sge; + int err = 0; + unsigned long flags; + struct p9_rdma_context *c = NULL; + struct p9_rdma_context *rpl_context = NULL; + + /* Allocate an fcall for the reply */ + rpl_context = kmalloc(sizeof *rpl_context, GFP_KERNEL); + if (!rpl_context) + goto err_close; + + /* + * If the request has a buffer, steal it, otherwise + * allocate a new one. Typically, requests should already + * have receive buffers allocated and just swap them around + */ + if (!req->rc) { + req->rc = kmalloc(sizeof(struct p9_fcall)+client->msize, + GFP_KERNEL); + if (req->rc) { + req->rc->sdata = (char *) req->rc + + sizeof(struct p9_fcall); + req->rc->capacity = client->msize; + } + } + rpl_context->rc = req->rc; + if (!rpl_context->rc) { + kfree(rpl_context); + goto err_close; + } + + /* + * Post a receive buffer for this request. We need to ensure + * there is a reply buffer available for every outstanding + * request. A flushed request can result in no reply for an + * outstanding request, so we must keep a count to avoid + * overflowing the RQ. + */ + if (atomic_inc_return(&rdma->rq_count) <= rdma->rq_depth) { + err = post_recv(client, rpl_context); + if (err) { + kfree(rpl_context->rc); + kfree(rpl_context); + goto err_close; + } + } else + atomic_dec(&rdma->rq_count); + + /* remove posted receive buffer from request structure */ + req->rc = NULL; + + /* Post the request */ + c = kmalloc(sizeof *c, GFP_KERNEL); + if (!c) + goto err_close; + c->req = req; + + c->busa = ib_dma_map_single(rdma->cm_id->device, + c->req->tc->sdata, c->req->tc->size, + DMA_TO_DEVICE); + if (ib_dma_mapping_error(rdma->cm_id->device, c->busa)) + goto error; + + sge.addr = c->busa; + sge.length = c->req->tc->size; + sge.lkey = rdma->lkey; + + wr.next = NULL; + c->wc_op = IB_WC_SEND; + wr.wr_id = (unsigned long) c; + wr.opcode = IB_WR_SEND; + wr.send_flags = IB_SEND_SIGNALED; + wr.sg_list = &sge; + wr.num_sge = 1; + + if (down_interruptible(&rdma->sq_sem)) + goto error; + + return ib_post_send(rdma->qp, &wr, &bad_wr); + + error: + P9_DPRINTK(P9_DEBUG_ERROR, "EIO\n"); + return -EIO; + + err_close: + spin_lock_irqsave(&rdma->req_lock, flags); + if (rdma->state < P9_RDMA_CLOSING) { + rdma->state = P9_RDMA_CLOSING; + spin_unlock_irqrestore(&rdma->req_lock, flags); + rdma_disconnect(rdma->cm_id); + } else + spin_unlock_irqrestore(&rdma->req_lock, flags); + return err; +} + +static void rdma_close(struct p9_client *client) +{ + struct p9_trans_rdma *rdma; + + if (!client) + return; + + rdma = client->trans; + if (!rdma) + return; + + client->status = Disconnected; + rdma_disconnect(rdma->cm_id); + rdma_destroy_trans(rdma); +} + +/** + * alloc_rdma - Allocate and initialize the rdma transport structure + * @msize: MTU + * @dotu: Extension attribute + * @opts: Mount options structure + */ +static struct p9_trans_rdma *alloc_rdma(struct p9_rdma_opts *opts) +{ + struct p9_trans_rdma *rdma; + + rdma = kzalloc(sizeof(struct p9_trans_rdma), GFP_KERNEL); + if (!rdma) + return NULL; + + rdma->sq_depth = opts->sq_depth; + rdma->rq_depth = opts->rq_depth; + rdma->timeout = opts->timeout; + spin_lock_init(&rdma->req_lock); + init_completion(&rdma->cm_done); + sema_init(&rdma->sq_sem, rdma->sq_depth); + atomic_set(&rdma->rq_count, 0); + + return rdma; +} + +/* its not clear to me we can do anything after send has been posted */ +static int rdma_cancel(struct p9_client *client, struct p9_req_t *req) +{ + return 1; +} + +/** + * trans_create_rdma - Transport method for creating atransport instance + * @client: client instance + * @addr: IP address string + * @args: Mount options string + */ +static int +rdma_create_trans(struct p9_client *client, const char *addr, char *args) +{ + int err; + struct p9_rdma_opts opts; + struct p9_trans_rdma *rdma; + struct rdma_conn_param conn_param; + struct ib_qp_init_attr qp_attr; + struct ib_device_attr devattr; + + /* Parse the transport specific mount options */ + err = parse_opts(args, &opts); + if (err < 0) + return err; + + /* Create and initialize the RDMA transport structure */ + rdma = alloc_rdma(&opts); + if (!rdma) + return -ENOMEM; + + /* Create the RDMA CM ID */ + rdma->cm_id = rdma_create_id(p9_cm_event_handler, client, RDMA_PS_TCP); + if (IS_ERR(rdma->cm_id)) + goto error; + + /* Resolve the server's address */ + rdma->addr.sin_family = AF_INET; + rdma->addr.sin_addr.s_addr = in_aton(addr); + rdma->addr.sin_port = htons(opts.port); + err = rdma_resolve_addr(rdma->cm_id, NULL, + (struct sockaddr *)&rdma->addr, + rdma->timeout); + if (err) + goto error; + err = wait_for_completion_interruptible(&rdma->cm_done); + if (err || (rdma->state != P9_RDMA_ADDR_RESOLVED)) + goto error; + + /* Resolve the route to the server */ + err = rdma_resolve_route(rdma->cm_id, rdma->timeout); + if (err) + goto error; + err = wait_for_completion_interruptible(&rdma->cm_done); + if (err || (rdma->state != P9_RDMA_ROUTE_RESOLVED)) + goto error; + + /* Query the device attributes */ + err = ib_query_device(rdma->cm_id->device, &devattr); + if (err) + goto error; + + /* Create the Completion Queue */ + rdma->cq = ib_create_cq(rdma->cm_id->device, cq_comp_handler, + cq_event_handler, client, + opts.sq_depth + opts.rq_depth + 1, 0); + if (IS_ERR(rdma->cq)) + goto error; + ib_req_notify_cq(rdma->cq, IB_CQ_NEXT_COMP); + + /* Create the Protection Domain */ + rdma->pd = ib_alloc_pd(rdma->cm_id->device); + if (IS_ERR(rdma->pd)) + goto error; + + /* Cache the DMA lkey in the transport */ + rdma->dma_mr = NULL; + if (devattr.device_cap_flags & IB_DEVICE_LOCAL_DMA_LKEY) + rdma->lkey = rdma->cm_id->device->local_dma_lkey; + else { + rdma->dma_mr = ib_get_dma_mr(rdma->pd, IB_ACCESS_LOCAL_WRITE); + if (IS_ERR(rdma->dma_mr)) + goto error; + rdma->lkey = rdma->dma_mr->lkey; + } + + /* Create the Queue Pair */ + memset(&qp_attr, 0, sizeof qp_attr); + qp_attr.event_handler = qp_event_handler; + qp_attr.qp_context = client; + qp_attr.cap.max_send_wr = opts.sq_depth; + qp_attr.cap.max_recv_wr = opts.rq_depth; + qp_attr.cap.max_send_sge = P9_RDMA_SEND_SGE; + qp_attr.cap.max_recv_sge = P9_RDMA_RECV_SGE; + qp_attr.sq_sig_type = IB_SIGNAL_REQ_WR; + qp_attr.qp_type = IB_QPT_RC; + qp_attr.send_cq = rdma->cq; + qp_attr.recv_cq = rdma->cq; + err = rdma_create_qp(rdma->cm_id, rdma->pd, &qp_attr); + if (err) + goto error; + rdma->qp = rdma->cm_id->qp; + + /* Request a connection */ + memset(&conn_param, 0, sizeof(conn_param)); + conn_param.private_data = NULL; + conn_param.private_data_len = 0; + conn_param.responder_resources = P9_RDMA_IRD; + conn_param.initiator_depth = P9_RDMA_ORD; + err = rdma_connect(rdma->cm_id, &conn_param); + if (err) + goto error; + err = wait_for_completion_interruptible(&rdma->cm_done); + if (err || (rdma->state != P9_RDMA_CONNECTED)) + goto error; + + client->trans = rdma; + client->status = Connected; + + return 0; + +error: + rdma_destroy_trans(rdma); + return -ENOTCONN; +} + +static struct p9_trans_module p9_rdma_trans = { + .name = "rdma", + .maxsize = P9_RDMA_MAXSIZE, + .def = 0, + .owner = THIS_MODULE, + .create = rdma_create_trans, + .close = rdma_close, + .request = rdma_request, + .cancel = rdma_cancel, +}; + +/** + * p9_trans_rdma_init - Register the 9P RDMA transport driver + */ +static int __init p9_trans_rdma_init(void) +{ + v9fs_register_trans(&p9_rdma_trans); + return 0; +} + +static void __exit p9_trans_rdma_exit(void) +{ + v9fs_unregister_trans(&p9_rdma_trans); +} + +module_init(p9_trans_rdma_init); +module_exit(p9_trans_rdma_exit); + +MODULE_AUTHOR("Tom Tucker <tom@opengridcomputing.com>"); +MODULE_DESCRIPTION("RDMA Transport for 9P"); +MODULE_LICENSE("Dual BSD/GPL"); |