summaryrefslogtreecommitdiffstats
path: root/fs/xfs
AgeCommit message (Collapse)Author
2009-12-17kill I_LOCKChristoph Hellwig
After I_SYNC was split from I_LOCK the leftover is always used together with I_NEW and thus superflous. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-16Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds
* 'for-linus' of git://oss.sgi.com/xfs/xfs: XFS: Free buffer pages array unconditionally xfs: kill xfs_bmbt_rec_32/64 types xfs: improve metadata I/O merging in the elevator xfs: check for not fully initialized inodes in xfs_ireclaim
2009-12-16XFS: Free buffer pages array unconditionallyDave Chinner
The code in xfs_free_buf() only attempts to free the b_pages array if the buffer is a page cache backed or page allocated buffer. The extra log buffer that is used when the log wraps uses pages that are allocated to a different log buffer, but it still has a b_pages array allocated when those pages are associated to with the extra buffer in xfs_buf_associate_memory. Hence we need to always attempt to free the b_pages array when tearing down a buffer, not just on buffers that are explicitly marked as page bearing buffers. This fixes a leak detected by the kernel memory leak code. Signed-off-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-16xfs: kill xfs_bmbt_rec_32/64 typesChristoph Hellwig
For a long time we've always stored bmap btree records in the 64bit format, so kill off the dead 32bit type, and make sure the 64bit type is named just xfs_bmbt_rec everywhere, without any size postfix. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Eric Sandeen <sandeen@redhat.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-16xfs: improve metadata I/O merging in the elevatorDave Chinner
Change all async metadata buffers to use [READ|WRITE]_META I/O types so that the I/O doesn't get issued immediately. This allows merging of adjacent metadata requests but still prioritises them over bulk data. This shows a 10-15% improvement in sequential create speed of small files. Don't include the log buffers in this classification - leave them as sync types so they are issued immediately. Signed-off-by: Dave Chinner <dgc@sgi.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-16xfs: check for not fully initialized inodes in xfs_ireclaimChristoph Hellwig
Add an assert for inodes not added to the inode cache in xfs_ireclaim, to make sure we're not going to introduce something like the famous nfsd inode cache bug again. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-16cleanup blockdev_direct_IO lockingChristoph Hellwig
Currently the locking in blockdev_direct_IO is a mess, we have three different locking types and very confusing checks for some of them. The most complicated one is DIO_OWN_LOCKING for reads, which happens to not actually be used. This patch gets rid of the DIO_OWN_LOCKING - as mentioned above the read case is unused anyway, and the write side is almost identical to DIO_NO_LOCKING. The difference is that DIO_NO_LOCKING always sets the create argument for the get_blocks callback to zero, but we can easily move that to the actual get_blocks callbacks. There are four users of the DIO_NO_LOCKING mode: gfs already ignores the create argument and thus is fine with the new version, ocfs2 only errors out if create were ever set, and we can remove this dead code now, the block device code only ever uses create for an error message if we are fully beyond the device which can never happen, and last but not least XFS will need the new behavour for writes. Now we can replace the lock_type variable with a flags one, where no flag means the DIO_NO_LOCKING behaviour and DIO_LOCKING is kept as the first flag. Separate out the check for not allowing to fill holes into a separate flag, although for now both flags always get set at the same time. Also revamp the documentation of the locking scheme to actually make sense. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-16sanitize xattr handler prototypesChristoph Hellwig
Add a flags argument to struct xattr_handler and pass it to all xattr handler methods. This allows using the same methods for multiple handlers, e.g. for the ACL methods which perform exactly the same action for the access and default ACLs, just using a different underlying attribute. With a little more groundwork it'll also allow sharing the methods for the regular user/trusted/secure handlers in extN, ocfs2 and jffs2 like it's already done for xfs in this patch. Also change the inode argument to the handlers to a dentry to allow using the handlers mechnism for filesystems that require it later, e.g. cifs. [with GFS2 bits updated by Steven Whitehouse <swhiteho@redhat.com>] Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: James Morris <jmorris@namei.org> Acked-by: Joel Becker <joel.becker@oracle.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-12-16direct-io: cleanup blockdev_direct_IO lockingChristoph Hellwig
Currently the locking in blockdev_direct_IO is a mess, we have three different locking types and very confusing checks for some of them. The most complicated one is DIO_OWN_LOCKING for reads, which happens to not actually be used. This patch gets rid of the DIO_OWN_LOCKING - as mentioned above the read case is unused anyway, and the write side is almost identical to DIO_NO_LOCKING. The difference is that DIO_NO_LOCKING always sets the create argument for the get_blocks callback to zero, but we can easily move that to the actual get_blocks callbacks. There are four users of the DIO_NO_LOCKING mode: gfs already ignores the create argument and thus is fine with the new version, ocfs2 only errors out if create were ever set, and we can remove this dead code now, the block device code only ever uses create for an error message if we are fully beyond the device which can never happen, and last but not least XFS will need the new behavour for writes. Now we can replace the lock_type variable with a flags one, where no flag means the DIO_NO_LOCKING behaviour and DIO_LOCKING is kept as the first flag. Separate out the check for not allowing to fill holes into a separate flag, although for now both flags always get set at the same time. Also revamp the documentation of the locking scheme to actually make sense. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Dave Chinner <david@fromorbit.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Zach Brown <zach.brown@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Alex Elder <aelder@sgi.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <joel.becker@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: event tracing support xfs: change the xfs_iext_insert / xfs_iext_remove xfs: cleanup bmap extent state macros
2009-12-15fs/xfs/xfs_log_recover.c: use %pU to print UUIDsJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Alex Elder <aelder@sgi.com> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-14xfs: event tracing supportChristoph Hellwig
Convert the old xfs tracing support that could only be used with the out of tree kdb and xfsidbg patches to use the generic event tracer. To use it make sure CONFIG_EVENT_TRACING is enabled and then enable all xfs trace channels by: echo 1 > /sys/kernel/debug/tracing/events/xfs/enable or alternatively enable single events by just doing the same in one event subdirectory, e.g. echo 1 > /sys/kernel/debug/tracing/events/xfs/xfs_ihold/enable or set more complex filters, etc. In Documentation/trace/events.txt all this is desctribed in more detail. To reads the events do a cat /sys/kernel/debug/tracing/trace Compared to the last posting this patch converts the tracing mostly to the one tracepoint per callsite model that other users of the new tracing facility also employ. This allows a very fine-grained control of the tracing, a cleaner output of the traces and also enables the perf tool to use each tracepoint as a virtual performance counter, allowing us to e.g. count how often certain workloads git various spots in XFS. Take a look at http://lwn.net/Articles/346470/ for some examples. Also the btree tracing isn't included at all yet, as it will require additional core tracing features not in mainline yet, I plan to deliver it later. And the really nice thing about this patch is that it actually removes many lines of code while adding this nice functionality: fs/xfs/Makefile | 8 fs/xfs/linux-2.6/xfs_acl.c | 1 fs/xfs/linux-2.6/xfs_aops.c | 52 - fs/xfs/linux-2.6/xfs_aops.h | 2 fs/xfs/linux-2.6/xfs_buf.c | 117 +-- fs/xfs/linux-2.6/xfs_buf.h | 33 fs/xfs/linux-2.6/xfs_fs_subr.c | 3 fs/xfs/linux-2.6/xfs_ioctl.c | 1 fs/xfs/linux-2.6/xfs_ioctl32.c | 1 fs/xfs/linux-2.6/xfs_iops.c | 1 fs/xfs/linux-2.6/xfs_linux.h | 1 fs/xfs/linux-2.6/xfs_lrw.c | 87 -- fs/xfs/linux-2.6/xfs_lrw.h | 45 - fs/xfs/linux-2.6/xfs_super.c | 104 --- fs/xfs/linux-2.6/xfs_super.h | 7 fs/xfs/linux-2.6/xfs_sync.c | 1 fs/xfs/linux-2.6/xfs_trace.c | 75 ++ fs/xfs/linux-2.6/xfs_trace.h | 1369 +++++++++++++++++++++++++++++++++++++++++ fs/xfs/linux-2.6/xfs_vnode.h | 4 fs/xfs/quota/xfs_dquot.c | 110 --- fs/xfs/quota/xfs_dquot.h | 21 fs/xfs/quota/xfs_qm.c | 40 - fs/xfs/quota/xfs_qm_syscalls.c | 4 fs/xfs/support/ktrace.c | 323 --------- fs/xfs/support/ktrace.h | 85 -- fs/xfs/xfs.h | 16 fs/xfs/xfs_ag.h | 14 fs/xfs/xfs_alloc.c | 230 +----- fs/xfs/xfs_alloc.h | 27 fs/xfs/xfs_alloc_btree.c | 1 fs/xfs/xfs_attr.c | 107 --- fs/xfs/xfs_attr.h | 10 fs/xfs/xfs_attr_leaf.c | 14 fs/xfs/xfs_attr_sf.h | 40 - fs/xfs/xfs_bmap.c | 507 +++------------ fs/xfs/xfs_bmap.h | 49 - fs/xfs/xfs_bmap_btree.c | 6 fs/xfs/xfs_btree.c | 5 fs/xfs/xfs_btree_trace.h | 17 fs/xfs/xfs_buf_item.c | 87 -- fs/xfs/xfs_buf_item.h | 20 fs/xfs/xfs_da_btree.c | 3 fs/xfs/xfs_da_btree.h | 7 fs/xfs/xfs_dfrag.c | 2 fs/xfs/xfs_dir2.c | 8 fs/xfs/xfs_dir2_block.c | 20 fs/xfs/xfs_dir2_leaf.c | 21 fs/xfs/xfs_dir2_node.c | 27 fs/xfs/xfs_dir2_sf.c | 26 fs/xfs/xfs_dir2_trace.c | 216 ------ fs/xfs/xfs_dir2_trace.h | 72 -- fs/xfs/xfs_filestream.c | 8 fs/xfs/xfs_fsops.c | 2 fs/xfs/xfs_iget.c | 111 --- fs/xfs/xfs_inode.c | 67 -- fs/xfs/xfs_inode.h | 76 -- fs/xfs/xfs_inode_item.c | 5 fs/xfs/xfs_iomap.c | 85 -- fs/xfs/xfs_iomap.h | 8 fs/xfs/xfs_log.c | 181 +---- fs/xfs/xfs_log_priv.h | 20 fs/xfs/xfs_log_recover.c | 1 fs/xfs/xfs_mount.c | 2 fs/xfs/xfs_quota.h | 8 fs/xfs/xfs_rename.c | 1 fs/xfs/xfs_rtalloc.c | 1 fs/xfs/xfs_rw.c | 3 fs/xfs/xfs_trans.h | 47 + fs/xfs/xfs_trans_buf.c | 62 - fs/xfs/xfs_vnodeops.c | 8 70 files changed, 2151 insertions(+), 2592 deletions(-) Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-14xfs: change the xfs_iext_insert / xfs_iext_removeChristoph Hellwig
Change the xfs_iext_insert / xfs_iext_remove prototypes to pass more information which will allow pushing the trace points from the callers into those functions. This includes folding the whichfork information into the state variable to minimize the addition stack footprint. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-14xfs: cleanup bmap extent state macrosChristoph Hellwig
Cleanup the extent state macros in the bmap code to use one common set of flags that we can pass to the tracing code later and remove a lot of the macro obsfucation. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-14Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (34 commits) m68k: rename global variable vmalloc_end to m68k_vmalloc_end percpu: add missing per_cpu_ptr_to_phys() definition for UP percpu: Fix kdump failure if booted with percpu_alloc=page percpu: make misc percpu symbols unique percpu: make percpu symbols in ia64 unique percpu: make percpu symbols in powerpc unique percpu: make percpu symbols in x86 unique percpu: make percpu symbols in xen unique percpu: make percpu symbols in cpufreq unique percpu: make percpu symbols in oprofile unique percpu: make percpu symbols in tracer unique percpu: make percpu symbols under kernel/ and mm/ unique percpu: remove some sparse warnings percpu: make alloc_percpu() handle array types vmalloc: fix use of non-existent percpu variable in put_cpu_var() this_cpu: Use this_cpu_xx in trace_functions_graph.c this_cpu: Use this_cpu_xx for ftrace this_cpu: Use this_cpu_xx in nmi handling this_cpu: Use this_cpu operations in RCU this_cpu: Use this_cpu ops for VM statistics ... Fix up trivial (famous last words) global per-cpu naming conflicts in arch/x86/kvm/svm.c mm/slab.c
2009-12-11Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs-2.6: (21 commits) ext3: PTR_ERR return of wrong pointer in setup_new_group_blocks() ext3: Fix data / filesystem corruption when write fails to copy data ext4: Support for 64-bit quota format ext3: Support for vfsv1 quota format quota: Implement quota format with 64-bit space and inode limits quota: Move definition of QFMT_OCFS2 to linux/quota.h ext2: fix comment in ext2_find_entry about return values ext3: Unify log messages in ext3 ext2: clear uptodate flag on super block I/O error ext2: Unify log messages in ext2 ext3: make "norecovery" an alias for "noload" ext3: Don't update the superblock in ext3_statfs() ext3: journal all modifications in ext3_xattr_set_handle ext2: Explicitly assign values to on-disk enum of filetypes quota: Fix WARN_ON in lookup_one_len const: struct quota_format_ops ubifs: remove manual O_SYNC handling afs: remove manual O_SYNC handling kill wait_on_page_writeback_range vfs: Implement proper O_SYNC semantics ...
2009-12-11Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: Fix error return for fallocate() on XFS xfs: cleanup dmapi macros in the umount path xfs: remove incorrect sparse annotation for xfs_iget_cache_miss xfs: kill the STATIC_INLINE macro xfs: uninline xfs_get_extsz_hint xfs: rename xfs_attr_fetch to xfs_attr_get_int xfs: simplify xfs_buf_get / xfs_buf_read interfaces xfs: remove IO_ISAIO xfs: Wrapped journal record corruption on read at recovery xfs: cleanup data end I/O handlers xfs: use WRITE_SYNC_PLUG for synchronous writeout xfs: reset the i_iolock lock class in the reclaim path xfs: I/O completion handlers must use NOFS allocations xfs: fix mmap_sem/iolock inversion in xfs_free_eofblocks xfs: simplify inode teardown
2009-12-11xfs: Fix error return for fallocate() on XFSJason Gunthorpe
Noticed that through glibc fallocate would return 28 rather than -1 and errno = 28 for ENOSPC. The xfs routines uses XFS_ERROR format positive return error codes while the syscalls use negative return codes. Fixup the two cases in xfs_vn_fallocate syscall to convert to negative. Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-11xfs: cleanup dmapi macros in the umount pathChristoph Hellwig
Stop the flag saving as we never mangle those in the unmount path, and hide all the weird arguents to the dmapi code inside the XFS_SEND_PREUNMOUNT / XFS_SEND_UNMOUNT macros. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-11xfs: remove incorrect sparse annotation for xfs_iget_cache_missChristoph Hellwig
xfs_iget_cache_miss does not get called with the pag_ici_lock held, so the __releases annotation is incorrect. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-11xfs: kill the STATIC_INLINE macroChristoph Hellwig
Remove our own STATIC_INLINE macro. For small function inside implementation files just use STATIC and let gcc inline it, and for those in headers do the normal static inline - they are all small enough to be inlined for debug builds, too. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-11xfs: uninline xfs_get_extsz_hintChristoph Hellwig
This function is too large to efficiently be inlined. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-11xfs: rename xfs_attr_fetch to xfs_attr_get_intChristoph Hellwig
Using a totally different name for the low-level get operation does not fit the _int convention used in the rest of the attr code, so rename it. While we're at it also fix the prototype to use the normal convention and mark it static as it's never used outside of xfs_attr.c. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-11xfs: simplify xfs_buf_get / xfs_buf_read interfacesChristoph Hellwig
Currently the low-level buffer cache interfaces are highly confusing as we have a _flags variant of each that does actually respect the flags, and one without _flags which has a flags argument that gets ignored and overriden with a default set. Given that very few places use the default arguments get rid of the duplication and convert all callers to pass the flags explicitly. Also remove the now confusing _flags postfix. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-11xfs: remove IO_ISAIOChristoph Hellwig
We set the IO_ISAIO flag for all read/write I/O since early Linux 2.6.x. Remove it as it has lost it's purpose long ago. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Dave Chinner <david@fromorbit.com> Reviewed-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-11xfs: Wrapped journal record corruption on read at recoveryAndy Poling
Summary of problem: If a journal record wraps at the physical end of the journal, it has to be read in two parts in xlog_do_recovery_pass(): a read at the physical end and a read at the physical beginning. If xlog_bread() has to re-align the first read, the second read request does not take that re-alignment into account. If the first read was re-aligned, the second read over-writes the end of the data from the first read, effectively corrupting it. This can happen either when reading the record header or reading the record data. The first sanity check in xlog_recover_process_data() is to check for a valid clientid, so that is the error reported. Summary of fix: If there was a first read at the physical end, XFS_BUF_PTR() returns where the data was requested to begin. Conversely, because it is the result of xlog_align(), offset indicates where the requested data for the first read actually begins - whether or not xlog_bread() has re-aligned it. Using offset as the base for the calculation of where to place the second read data ensures that it will be correctly placed immediately following the data from the first read instead of sometimes over-writing the end of it. The attached patch has resolved the reported problem of occasional inability to recover the journal (reporting "bad clientid"). Signed-off-by: Andy Poling <andy@realbig.com> Reviewed-by: Alex Elder <aelder@sgi.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-11xfs: cleanup data end I/O handlersChristoph Hellwig
Currently we have different end I/O handlers for read vs the different types of write I/O. But they are all very similar so we could just use one with a few conditionals and reduce code size a lot. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-11xfs: use WRITE_SYNC_PLUG for synchronous writeoutChristoph Hellwig
The VM and I/O schedulers now expect us to use WRITE_SYNC_PLUG for synchronous writeout. Right now I can't see any changes in performance numbers with this, but we're getting some beating for not using it, and the knowledge definitely could help the block code to make better decisions. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-11xfs: reset the i_iolock lock class in the reclaim pathChristoph Hellwig
The iolock is used for protecting reads, writes and block truncates against each other. We have two classes of callers, the first one is induced by a file operation and requires a reference to the inode be held and not dropped after the operation is done: - xfs_vm_vmap, xfs_vn_fallocate, xfs_read, xfs_write, xfs_splice_read, xfs_splice_write and xfs_setattr are all implementations of VFS methods that require a live inode - xfs_getbmap and xfs_swap_extents are ioctl subcommand for which the same is true - xfs_truncate_file is only called on quota inodes just returned from xfs_iget - xfs_sync_inode_data does the lock just after an igrab() - xfs_filestream_associate and xfs_filestream_new_ag take the iolock on the parent inode of an inode which by VFS rules must be referenced And we have various calls to truncate blocks past EOF or the whole file when dropping the last reference to an inode. Unfortunately lockdep complains when we do memory allocations that can recurse into the filesystem in the first class because the second class happens to take the same lock. To avoid this re-init the iolock in the beginning of xfs_fs_clear_inode to get a new lock class. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-11xfs: I/O completion handlers must use NOFS allocationsChristoph Hellwig
When completing I/O requests we must not allow the memory allocator to recurse into the filesystem, as we might deadlock on waiting for the I/O completion otherwise. The only thing currently allocating normal GFP_KERNEL memory is the allocation of the transaction structure for the unwritten extent conversion. Add a memflags argument to _xfs_trans_alloc to allow controlling the allocator behaviour. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Thomas Neumann <tneumann@users.sourceforge.net> Tested-by: Thomas Neumann <tneumann@users.sourceforge.net> Reviewed-by: Alex Elder <aelder@sgi.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-11xfs: fix mmap_sem/iolock inversion in xfs_free_eofblocksChristoph Hellwig
When xfs_free_eofblocks is called from ->release the VM might already hold the mmap_sem, but in the write path we take the iolock before taking the mmap_sem in the generic write code. Switch xfs_free_eofblocks to only trylock the iolock if called from ->release and skip trimming the prellocated blocks in that case. We'll still free them later on the final iput. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Alex Elder <aelder@sgi.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-11xfs: simplify inode teardownChristoph Hellwig
Currently the reclaim code for the case where we don't reclaim the final reclaim is overly complicated. We know that the inode is clean but instead of just directly reclaiming the clean inode we go through the whole process of marking the inode reclaimable just to directly reclaim it from the calling context. Besides being overly complicated this introduces a race where iget could recycle an inode between marked reclaimable and actually being reclaimed leading to panics. This patch gets rid of the existing reclaim path, and replaces it with a simple call to xfs_ireclaim if the inode was clean. While we're at it we also use the slightly more lax xfs_inode_clean check we'd use later to determine if we need to flush the inode here. Finally get rid of xfs_reclaim function and place the remaining small bits of reclaim code directly into xfs_fs_destroy_inode. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Patrick Schreurs <patrick@news-service.com> Reported-by: Tommy van Leeuwen <tommy@news-service.com> Tested-by: Patrick Schreurs <patrick@news-service.com> Reviewed-by: Alex Elder <aelder@sgi.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-12-10vfs: Implement proper O_SYNC semanticsChristoph Hellwig
While Linux provided an O_SYNC flag basically since day 1, it took until Linux 2.4.0-test12pre2 to actually get it implemented for filesystems, since that day we had generic_osync_around with only minor changes and the great "For now, when the user asks for O_SYNC, we'll actually give O_DSYNC" comment. This patch intends to actually give us real O_SYNC semantics in addition to the O_DSYNC semantics. After Jan's O_SYNC patches which are required before this patch it's actually surprisingly simple, we just need to figure out when to set the datasync flag to vfs_fsync_range and when not. This patch renames the existing O_SYNC flag to O_DSYNC while keeping it's numerical value to keep binary compatibility, and adds a new real O_SYNC flag. To guarantee backwards compatiblity it is defined as expanding to both the O_DSYNC and the new additional binary flag (__O_SYNC) to make sure we are backwards-compatible when compiled against the new headers. This also means that all places that don't care about the differences can just check O_DSYNC and get the right behaviour for O_SYNC, too - only places that actuall care need to check __O_SYNC in addition. Drivers and network filesystems have been updated in a fail safe way to always do the full sync magic if O_DSYNC is set. The few places setting O_SYNC for lower layers are kept that way for now to stay failsafe. We enforce that O_DSYNC is set when __O_SYNC is set early in the open path to make sure we always get these sane options. Note that parisc really screwed up their headers as they already define a O_DSYNC that has always been a no-op. We try to repair it by using it for the new O_DSYNC and redefinining O_SYNC to send both the traditional O_SYNC numerical value _and_ the O_DSYNC one. Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Grant Grundler <grundler@parisc-linux.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <adilger@sun.com> Acked-by: Trond Myklebust <Trond.Myklebust@netapp.com> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jan Kara <jack@suse.cz>
2009-12-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits) tree-wide: fix misspelling of "definition" in comments reiserfs: fix misspelling of "journaled" doc: Fix a typo in slub.txt. inotify: remove superfluous return code check hdlc: spelling fix in find_pvc() comment doc: fix regulator docs cut-and-pasteism mtd: Fix comment in Kconfig doc: Fix IRQ chip docs tree-wide: fix assorted typos all over the place drivers/ata/libata-sff.c: comment spelling fixes fix typos/grammos in Documentation/edac.txt sysctl: add missing comments fs/debugfs/inode.c: fix comment typos sgivwfb: Make use of ARRAY_SIZE. sky2: fix sky2_link_down copy/paste comment error tree-wide: fix typos "couter" -> "counter" tree-wide: fix typos "offest" -> "offset" fix kerneldoc for set_irq_msi() spidev: fix double "of of" in comment comment typo fix: sybsystem -> subsystem ...
2009-12-08Merge branch 'for-2.6.33' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-2.6.33' of git://git.kernel.dk/linux-2.6-block: (113 commits) cfq-iosched: Do not access cfqq after freeing it block: include linux/err.h to use ERR_PTR cfq-iosched: use call_rcu() instead of doing grace period stall on queue exit blkio: Allow CFQ group IO scheduling even when CFQ is a module blkio: Implement dynamic io controlling policy registration blkio: Export some symbols from blkio as its user CFQ can be a module block: Fix io_context leak after failure of clone with CLONE_IO block: Fix io_context leak after clone with CLONE_IO cfq-iosched: make nonrot check logic consistent io controller: quick fix for blk-cgroup and modular CFQ cfq-iosched: move IO controller declerations to a header file cfq-iosched: fix compile problem with !CONFIG_CGROUP blkio: Documentation blkio: Wait on sync-noidle queue even if rq_noidle = 1 blkio: Implement group_isolation tunable blkio: Determine async workload length based on total number of queues blkio: Wait for cfq queue to get backlogged if group is empty blkio: Propagate cgroup weight updation to cfq groups blkio: Drop the reference to queue once the task changes cgroup blkio: Provide some isolation between groups ...
2009-12-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/sysctl-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/sysctl-2.6: (43 commits) security/tomoyo: Remove now unnecessary handling of security_sysctl. security/tomoyo: Add a special case to handle accesses through the internal proc mount. sysctl: Drop & in front of every proc_handler. sysctl: Remove CTL_NONE and CTL_UNNUMBERED sysctl: kill dead ctl_handler definitions. sysctl: Remove the last of the generic binary sysctl support sysctl net: Remove unused binary sysctl code sysctl security/tomoyo: Don't look at ctl_name sysctl arm: Remove binary sysctl support sysctl x86: Remove dead binary sysctl support sysctl sh: Remove dead binary sysctl support sysctl powerpc: Remove dead binary sysctl support sysctl ia64: Remove dead binary sysctl support sysctl s390: Remove dead sysctl binary support sysctl frv: Remove dead binary sysctl support sysctl mips/lasat: Remove dead binary sysctl support sysctl drivers: Remove dead binary sysctl support sysctl crypto: Remove dead binary sysctl support sysctl security/keys: Remove dead binary sysctl support sysctl kernel: Remove binary sysctl logic ...
2009-12-07Merge branch 'for-next' into for-linusJiri Kosina
Conflicts: kernel/irq/chip.c
2009-12-04tree-wide: fix assorted typos all over the placeAndré Goddard Rosa
That is "success", "unknown", "through", "performance", "[re|un]mapping" , "access", "default", "reasonable", "[con]currently", "temperature" , "channel", "[un]used", "application", "example","hierarchy", "therefore" , "[over|under]flow", "contiguous", "threshold", "enough" and others. Signed-off-by: André Goddard Rosa <andre.goddard@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-12-03writeback: remove unused nonblocking and congestion checksWu Fengguang
- no one is calling wb_writeback and write_cache_pages with wbc.nonblocking=1 any more - lumpy pageout will want to do nonblocking writeback without the congestion wait So remove the congestion checks as suggested by Chris. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Chris Mason <chris.mason@oracle.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Evgeniy Polyakov <zbr@ioremap.net> Cc: Alex Elder <aelder@sgi.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-11-18sysctl: Drop & in front of every proc_handler.Eric W. Biederman
For consistency drop & in front of every proc_handler. Explicity taking the address is unnecessary and it prevents optimizations like stubbing the proc_handlers to NULL. Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Joe Perches <joe@perches.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-11-17xfs: copy li_lsn before dropping AIL lockNathaniel W. Turner
Access to log items on the AIL is generally protected by m_ail_lock; this is particularly needed when we're getting or setting the 64-bit li_lsn on a 32-bit platform. This patch fixes a couple places where we were accessing the log item after dropping the AIL lock on 32-bit machines. This can result in a partially-zeroed log->l_tail_lsn if xfs_trans_ail_delete is racing with xfs_trans_ail_update, and in at least some cases, this can leave the l_tail_lsn with a zero cycle number, which means xlog_space_left will think the log is full (unless CONFIG_XFS_DEBUG is set, in which case we'll trip an ASSERT), leading to processes stuck forever in xlog_grant_log_space. Thanks to Adrian VanderSpek for first spotting the race potential and to Dave Chinner for debug assistance. Signed-off-by: Nathaniel W. Turner <nate@houseofnate.net> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-11-17XFS bug in log recover with quota (bugzilla id 855)Jan Rekorajski
Hi, I was hit by a bug in linux 2.6.31 when XFS is not able to recover the log after a crash if fs was mounted with quotas. Gory details in XFS bugzilla: http://oss.sgi.com/bugzilla/show_bug.cgi?id=855. It looks like wrong struct is used in buffer length check, and the following patch should fix the problem. xfs_dqblk_t has a size of 104+32 bytes, while xfs_disk_dquot_t is 104 bytes long, and this is exactly what I see in system logs - "XFS: dquot too small (104) in xlog_recover_do_dquot_trans." Signed-off-by: Jan Rekorajski <baggins@sith.mimuw.edu.pl> Reviewed-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-11-12sysctl fs: Remove dead binary sysctl supportEric W. Biederman
Now that sys_sysctl is a generic wrapper around /proc/sys .ctl_name and .strategy members of sysctl tables are dead code. Remove them. Cc: Jan Harkes <jaharkes@cs.cmu.edu> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2009-10-31Merge branch 'for-linus' of git://git.kernel.org/pub/scm/fs/xfs/xfsLinus Torvalds
* 'for-linus' of git://git.kernel.org/pub/scm/fs/xfs/xfs: xfs: fix xfs_quota remove error xfs: free temporary cursor in xfs_dialloc
2009-10-30xfs: fix xfs_quota remove errorRyota Yamauchi
The xfs_quota returns ENOSYS when remove command is executed. Reproducable with following steps. # mount -t xfs -o uquota /dev/sda7 /mnt/mp1 # xfs_quota -x -c off -c remove XFS_QUOTARM: Function not implemented. The remove command is allowed during quotaoff, but xfs_fs_set_xstate() checks whether quota is running, and it leads to ENOSYS. To solve this problem, add a check for X_QUOTARM. Signed-off-by: Ryota Yamauchi <r-yamauchi@vf.jp.nec.com> Signed-off-by: Utako Kusaka <u-kusaka@wm.jp.nec.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
2009-10-30xfs: free temporary cursor in xfs_diallocEric Sandeen
Commit bd169565993b39b9b4b102cdac8b13e0a259ce2f seems to have a slight regression where this code path: if (!--searchdistance) { /* * Not in range - save last search * location and allocate a new inode */ ... goto newino; } doesn't free the temporary cursor (tcur) that got dup'd in this function. This leaks an item in the xfs_btree_cur zone, and it's caught on module unload: =========================================================== BUG xfs_btree_cur: Objects remaining on kmem_cache_close() ----------------------------------------------------------- It seems like maybe a single free at the end of the function might be cleaner, but for now put a del_cursor right in this code block similar to the handling in the rest of the function. Signed-off-by: Eric Sandeen <sandeen@sandeen.net> Signed-off-by: Christoph Hellwig <hch@lst.de>
2009-10-29Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: fix double IRELE in xfs_dqrele_inode
2009-10-13Merge branch 'master' of ssh://oss.sgi.com/oss/git/xfs/xfs into for-linusAlex Elder
2009-10-13xfs: fix double IRELE in xfs_dqrele_inodeChristoph Hellwig
xfs_dqrele_inode calls xfs_iput to release the ilock and a reference and then also calls IRELE which does a second decrement of the reference count. This leads to a premature freeing of inodes when quotas were turned off while the filesystem was mounted. Thanks to Utako Kusaka for reporting the bug and provinding a good testcase. Signed-off-by: Christoph Hellwig <hch@lst.de> Reported-by: Utako Kusaka <u-kusaka@wm.jp.nec.com> Reviewed-by: Alex Elder <aelder@sgi.com> Signed-off-by: Alex Elder <aelder@sgi.com>
2009-10-09Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfsLinus Torvalds
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: stop calling filemap_fdatawait inside ->fsync fix readahead calculations in xfs_dir2_leaf_getdents() xfs: make sure xfs_sync_fsdata covers the log xfs: mark inodes dirty before issuing I/O xfs: cleanup ->sync_fs xfs: fix xfs_quiesce_data xfs: implement ->dirty_inode to fix timestamp handling