summaryrefslogtreecommitdiffstats
path: root/drivers/md
AgeCommit message (Collapse)Author
2016-04-12md: multipath: don't hardcopy bio in .make_request pathMing Lei
commit fafcde3ac1a418688a734365203a12483b83907a upstream. Inside multipath_make_request(), multipath maps the incoming bio into low level device's bio, but it is totally wrong to copy the bio into mapped bio via '*mapped_bio = *bio'. For example, .__bi_remaining is kept in the copy, especially if the incoming bio is chained to via bio splitting, so .bi_end_io can't be called for the mapped bio at all in the completing path in this kind of situation. This patch fixes the issue by using clone style. Reported-and-tested-by: Andrea Righi <righi.andrea@gmail.com> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-12md/raid5: Compare apples to apples (or sectors to sectors)Jes Sorensen
commit e7597e69dec59b65c5525db1626b9d34afdfa678 upstream. 'max_discard_sectors' is in sectors, while 'stripe' is in bytes. This fixes the problem where DISCARD would get disabled on some larger RAID5 configurations (6 or more drives in my testing), while it worked as expected with smaller configurations. Fixes: 620125f2bf8 ("MD: raid5 trim support") Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-04-12bcache: fix cache_set_flush() NULL pointer dereference on OOMEric Wheeler
commit f8b11260a445169989d01df75d35af0f56178f95 upstream. When bch_cache_set_alloc() fails to kzalloc the cache_set, the asyncronous closure handling tries to dereference a cache_set that hadn't yet been allocated inside of cache_set_flush() which is called by __cache_set_unregister() during cleanup. This appears to happen only during an OOM condition on bcache_register. Signed-off-by: Eric Wheeler <bcache@linux.ewheeler.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03dm snapshot: fix hung bios when copy error occursMikulas Patocka
commit 385277bfb57faac44e92497104ba542cdd82d5fe upstream. When there is an error copying a chunk dm-snapshot can incorrectly hold associated bios indefinitely, resulting in hung IO. The function copy_callback sets pe->error if there was error copying the chunk, and then calls complete_exception. complete_exception calls pending_complete on error, otherwise it calls commit_exception with commit_callback (and commit_callback calls complete_exception). The persistent exception store (dm-snap-persistent.c) assumes that calls to prepare_exception and commit_exception are paired. persistent_prepare_exception increases ps->pending_count and persistent_commit_exception decreases it. If there is a copy error, persistent_prepare_exception is called but persistent_commit_exception is not. This results in the variable ps->pending_count never returning to zero and that causes some pending exceptions (and their associated bios) to be held forever. Fix this by unconditionally calling commit_exception regardless of whether the copy was successful. A new "valid" parameter is added to commit_exception -- when the copy fails this parameter is set to zero so that the chunk that failed to copy (and all following chunks) is not recorded in the snapshot store. Also, remove commit_callback now that it is merely a wrapper around pending_complete. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03dm space map metadata: remove unused variable in brb_pop()Mike Snitzer
commit 512167788a6fe9481a33a3cce5f80b684631a1bb upstream. Remove the unused struct block_op pointer that was inadvertantly introduced, via cut-and-paste of previous brb_op() code, as part of commit 50dd842ad. (Cc'ing stable@ because commit 50dd842ad did) Fixes: 50dd842ad ("dm space map metadata: fix ref counting bug when bootstrapping a new space map") Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03dm btree: fix bufio buffer leaks in dm_btree_del() error pathJoe Thornber
commit ed8b45a3679eb49069b094c0711b30833f27c734 upstream. If dm_btree_del()'s call to push_frame() fails, e.g. due to btree_node_validator finding invalid metadata, the dm_btree_del() error path must unlock all frames (which have active dm-bufio buffers) that were pushed onto the del_stack. Otherwise, dm_bufio_client_destroy() will BUG_ON() because dm-bufio buffers have leaked, e.g.: device-mapper: bufio: leaked buffer 3, hold count 1, list 0 Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03dm space map metadata: fix ref counting bug when bootstrapping a new space mapJoe Thornber
commit 50dd842ad83b43bed71790efb31cfb2f6c05c9c1 upstream. When applying block operations (BOPs) do not remove them from the uncommitted BOP ring-buffer until after they've been applied -- in case we recurse. Also, perform BOP_INC operation, in dm_sm_metadata_create() and sm_metadata_extend(), in terms of the uncommitted BOP ring-buffer rather than using direct calls to sm_ll_inc(). Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03dm thin: fix race condition when destroying thin pool workqueueNikolay Borisov
commit 18d03e8c25f173f4107a40d0b8c24defb6ed69f3 upstream. When a thin pool is being destroyed delayed work items are cancelled using cancel_delayed_work(), which doesn't guarantee that on return the delayed item isn't running. This can cause the work item to requeue itself on an already destroyed workqueue. Fix this by using cancel_delayed_work_sync() which guarantees that on return the work item is not running anymore. Fixes: 905e51b39a555 ("dm thin: commit outstanding data every second") Fixes: 85ad643b7e7e5 ("dm thin: add timeout to stop out-of-data-space mode holding IO forever") Signed-off-by: Nikolay Borisov <kernel@kyup.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03dm thin metadata: fix bug when taking a metadata snapshotJoe Thornber
commit 49e99fc717f624aa75ca755d6e7bc029efd3f0e9 upstream. When you take a metadata snapshot the btree roots for the mapping and details tree need to have their reference counts incremented so they persist for the lifetime of the metadata snap. The roots being incremented were those currently written in the superblock, which could possibly be out of date if concurrent IO is triggering new mappings, breaking of sharing, etc. Fix this by performing a commit with the metadata lock held while taking a metadata snapshot. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03dm thin: restore requested 'error_if_no_space' setting on OODS to WRITE ↵Mike Snitzer
transition commit 172c238612ebf81cabccc86b788c9209af591f61 upstream. A thin-pool that is in out-of-data-space (OODS) mode may transition back to write mode -- without the admin adding more space to the thin-pool -- if/when blocks are released (either by deleting thin devices or discarding provisioned blocks). But as part of the thin-pool's earlier transition to out-of-data-space mode the thin-pool may have set the 'error_if_no_space' flag to true if the no_space_timeout expires without more space having been made available. That implementation detail, of changing the pool's error_if_no_space setting, needs to be reset back to the default that the user specified when the thin-pool's table was loaded. Otherwise we'll drop the user requested behaviour on the floor when this out-of-data-space to write mode transition occurs. Reported-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <ejt@redhat.com> Fixes: 2c43fd26e4 ("dm thin: fix missing out-of-data-space to write mode transition if blocks are released") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03bcache: Change refill_dirty() to always scan entire disk if necessaryKent Overstreet
commit 627ccd20b4ad3ba836472468208e2ac4dfadbf03 upstream. Previously, it would only scan the entire disk if it was starting from the very start of the disk - i.e. if the previous scan got to the end. This was broken by refill_full_stripes(), which updates last_scanned so that refill_dirty was never triggering the searched_from_start path. But if we change refill_dirty() to always scan the entire disk if necessary, regardless of what last_scanned was, the code gets cleaner and we fix that bug too. Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03bcache: prevent crash on changing writeback_runningStefan Bader
commit 8d16ce540c94c9d366eb36fc91b7154d92d6397b upstream. Added a safeguard in the shutdown case. At least while not being attached it is also possible to trigger a kernel bug by writing into writeback_running. This change adds the same check before trying to wake up the thread for that case. Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Cc: Kent Overstreet <kent.overstreet@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03bcache: unregister reboot notifier if bcache fails to unregister deviceZheng Liu
commit 2ecf0cdb2b437402110ab57546e02abfa68a716b upstream. In bcache_init() function it forgot to unregister reboot notifier if bcache fails to unregister a block device. This commit fixes this. Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Tested-by: Joshua Schmid <jschmid@suse.com> Tested-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03bcache: fix a leak in bch_cached_dev_run()Al Viro
commit 4d4d8573a8451acc9f01cbea24b7e55f04a252fe upstream. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Tested-by: Joshua Schmid <jschmid@suse.com> Tested-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03bcache: clear BCACHE_DEV_UNLINK_DONE flag when attaching a backing deviceZheng Liu
commit fecaee6f20ee122ad75402c53d8278f9bb142ddc upstream. This bug can be reproduced by the following script: #!/bin/bash bcache_sysfs="/sys/fs/bcache" function clear_cache() { if [ ! -e $bcache_sysfs ]; then echo "no bcache sysfs" exit fi cset_uuid=$(ls -l $bcache_sysfs|head -n 2|tail -n 1|awk '{print $9}') sudo sh -c "echo $cset_uuid > /sys/block/sdb/sdb1/bcache/detach" sleep 5 sudo sh -c "echo $cset_uuid > /sys/block/sdb/sdb1/bcache/attach" } for ((i=0;i<10;i++)); do clear_cache done The warning messages look like below: [ 275.948611] ------------[ cut here ]------------ [ 275.963840] WARNING: at fs/sysfs/dir.c:512 sysfs_add_one+0xb8/0xd0() (Tainted: P W --------------- ) [ 275.979253] Hardware name: Tecal RH2285 [ 275.994106] sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:09.0/0000:08:00.0/host4/target4:2:1/4:2:1:0/block/sdb/sdb1/bcache/cache' [ 276.024105] Modules linked in: bcache tcp_diag inet_diag ipmi_devintf ipmi_si ipmi_msghandler bonding 8021q garp stp llc ipv6 ext3 jbd loop sg iomemory_vsl(P) bnx2 microcode serio_raw i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support i7core_edac edac_core shpchp ext4 jbd2 mbcache megaraid_sas pata_acpi ata_generic ata_piix dm_mod [last unloaded: scsi_wait_scan] [ 276.072643] Pid: 2765, comm: sh Tainted: P W --------------- 2.6.32 #1 [ 276.089315] Call Trace: [ 276.105801] [<ffffffff81070fe7>] ? warn_slowpath_common+0x87/0xc0 [ 276.122650] [<ffffffff810710d6>] ? warn_slowpath_fmt+0x46/0x50 [ 276.139361] [<ffffffff81205c08>] ? sysfs_add_one+0xb8/0xd0 [ 276.156012] [<ffffffff8120609b>] ? sysfs_do_create_link+0x12b/0x170 [ 276.172682] [<ffffffff81206113>] ? sysfs_create_link+0x13/0x20 [ 276.189282] [<ffffffffa03bda21>] ? bcache_device_link+0xc1/0x110 [bcache] [ 276.205993] [<ffffffffa03bfa08>] ? bch_cached_dev_attach+0x478/0x4f0 [bcache] [ 276.222794] [<ffffffffa03c4a17>] ? bch_cached_dev_store+0x627/0x780 [bcache] [ 276.239680] [<ffffffff8116783a>] ? alloc_pages_current+0xaa/0x110 [ 276.256594] [<ffffffff81203b15>] ? sysfs_write_file+0xe5/0x170 [ 276.273364] [<ffffffff811887b8>] ? vfs_write+0xb8/0x1a0 [ 276.290133] [<ffffffff811890b1>] ? sys_write+0x51/0x90 [ 276.306368] [<ffffffff8100c072>] ? system_call_fastpath+0x16/0x1b [ 276.322301] ---[ end trace 9f5d4fcdd0c3edfb ]--- [ 276.338241] ------------[ cut here ]------------ [ 276.354109] WARNING: at /home/wenqing.lz/bcache/bcache/super.c:720 bcache_device_link+0xdf/0x110 [bcache]() (Tainted: P W --------------- ) [ 276.386017] Hardware name: Tecal RH2285 [ 276.401430] Couldn't create device <-> cache set symlinks [ 276.401759] Modules linked in: bcache tcp_diag inet_diag ipmi_devintf ipmi_si ipmi_msghandler bonding 8021q garp stp llc ipv6 ext3 jbd loop sg iomemory_vsl(P) bnx2 microcode serio_raw i2c_i801 i2c_core iTCO_wdt iTCO_vendor_support i7core_edac edac_core shpchp ext4 jbd2 mbcache megaraid_sas pata_acpi ata_generic ata_piix dm_mod [last unloaded: scsi_wait_scan] [ 276.465477] Pid: 2765, comm: sh Tainted: P W --------------- 2.6.32 #1 [ 276.482169] Call Trace: [ 276.498610] [<ffffffff81070fe7>] ? warn_slowpath_common+0x87/0xc0 [ 276.515405] [<ffffffff810710d6>] ? warn_slowpath_fmt+0x46/0x50 [ 276.532059] [<ffffffffa03bda3f>] ? bcache_device_link+0xdf/0x110 [bcache] [ 276.548808] [<ffffffffa03bfa08>] ? bch_cached_dev_attach+0x478/0x4f0 [bcache] [ 276.565569] [<ffffffffa03c4a17>] ? bch_cached_dev_store+0x627/0x780 [bcache] [ 276.582418] [<ffffffff8116783a>] ? alloc_pages_current+0xaa/0x110 [ 276.599341] [<ffffffff81203b15>] ? sysfs_write_file+0xe5/0x170 [ 276.616142] [<ffffffff811887b8>] ? vfs_write+0xb8/0x1a0 [ 276.632607] [<ffffffff811890b1>] ? sys_write+0x51/0x90 [ 276.648671] [<ffffffff8100c072>] ? system_call_fastpath+0x16/0x1b [ 276.664756] ---[ end trace 9f5d4fcdd0c3edfc ]--- We forget to clear BCACHE_DEV_UNLINK_DONE flag in bcache_device_attach() function when we attach a backing device first time. After detaching this backing device, this flag will be true and sysfs_remove_link() isn't called in bcache_device_unlink(). Then when we attach this backing device again, sysfs_create_link() will return EEXIST error in bcache_device_link(). So the fix is trival and we clear this flag in bcache_device_link(). Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Tested-by: Joshua Schmid <jschmid@suse.com> Tested-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03bcache: Add a cond_resched() call to gcKent Overstreet
commit c5f1e5adf956e3ba82d204c7c141a75da9fa449a upstream. Signed-off-by: Takashi Iwai <tiwai@suse.de> Tested-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-03-03bcache: fix a livelock when we cause a huge number of cache missesZheng Liu
commit 2ef9ccbfcb90cf84bdba320a571b18b05c41101b upstream. Subject : [PATCH v2] bcache: fix a livelock in btree lock Date : Wed, 25 Feb 2015 20:32:09 +0800 (02/25/2015 04:32:09 AM) This commit tries to fix a livelock in bcache. This livelock might happen when we causes a huge number of cache misses simultaneously. When we get a cache miss, bcache will execute the following path. ->cached_dev_make_request() ->cached_dev_read() ->cached_lookup() ->bch->btree_map_keys() ->btree_root() <------------------------ ->bch_btree_map_keys_recurse() | ->cache_lookup_fn() | ->cached_dev_cache_miss() | ->bch_btree_insert_check_key() -| [If btree->seq is not equal to seq + 1, we should return EINTR and traverse btree again.] In bch_btree_insert_check_key() function we first need to check upgrade flag (op->lock == -1), and when this flag is true we need to release read btree->lock and try to take write btree->lock. During taking and releasing this write lock, btree->seq will be monotone increased in order to prevent other threads modify this in cache miss (see btree.h:74). But if there are some cache misses caused by some requested, we could meet a livelock because btree->seq is always changed by others. Thus no one can make progress. This commit will try to take write btree->lock if it encounters a race when we traverse btree. Although it sacrifice the scalability but we can ensure that only one can modify the btree. Signed-off-by: Zheng Liu <wenqing.lz@taobao.com> Tested-by: Joshua Schmid <jschmid@suse.com> Tested-by: Eric Wheeler <bcache@linux.ewheeler.net> Cc: Joshua Schmid <jschmid@suse.com> Cc: Zhu Yanhai <zhu.yanhai@gmail.com> Cc: Kent Overstreet <kmo@daterainc.com> Signed-off-by: Jens Axboe <axboe@fb.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-17Revert "dm mpath: fix stalls when handling invalid ioctls"Mauricio Faria de Oliveira
commit 47796938c46b943d157ac8a6f9ed4e3b98b83cf4 upstream. This reverts commit a1989b330093578ea5470bea0a00f940c444c466. That commit introduced a regression at least for the case of the SG_IO ioctl() running without CAP_SYS_RAWIO capability (e.g., unprivileged users) when there are no active paths: the ioctl() fails with the ENOTTY errno immediately rather than blocking due to queue_if_no_path until a path becomes active, for example. That case happens to be exercised by QEMU KVM guests with 'scsi-block' devices (qemu "-device scsi-block" [1], libvirt "<disk type='block' device='lun'>" [2]) from multipath devices; which leads to SCSI/filesystem errors in such a guest. More general scenarios can hit that regression too. The following demonstration employs a SG_IO ioctl() with a standard SCSI INQUIRY command for this objective (some output & user changes omitted for brevity and comments added for clarity). Reverting that commit restores normal operation (queueing) in failing scenarios; tested on linux-next (next-20151022). 1) Test-case is based on sg_simple0 [3] (just SG_IO; remove SG_GET_VERSION_NUM) $ cat sg_simple0.c ... see [3] ... $ sed '/SG_GET_VERSION_NUM/,/}/d' sg_simple0.c > sgio_inquiry.c $ gcc sgio_inquiry.c -o sgio_inquiry 2) The ioctl() works fine with active paths present. # multipath -l 85ag56 85ag56 (...) dm-19 IBM ,2145 size=60G features='1 queue_if_no_path' hwhandler='0' wp=rw |-+- policy='service-time 0' prio=0 status=active | |- 8:0:11:0 sdz 65:144 active undef running | `- 9:0:9:0 sdbf 67:144 active undef running `-+- policy='service-time 0' prio=0 status=enabled |- 8:0:12:0 sdae 65:224 active undef running `- 9:0:12:0 sdbo 68:32 active undef running $ ./sgio_inquiry /dev/mapper/85ag56 Some of the INQUIRY command's response: IBM 2145 0000 INQUIRY duration=0 millisecs, resid=0 3) The ioctl() fails with ENOTTY errno with _no_ active paths present, for unprivileged users (rather than blocking due to queue_if_no_path). # for path in $(multipath -l 85ag56 | grep -o 'sd[a-z]\+'); \ do multipathd -k"fail path $path"; done # multipath -l 85ag56 85ag56 (...) dm-19 IBM ,2145 size=60G features='1 queue_if_no_path' hwhandler='0' wp=rw |-+- policy='service-time 0' prio=0 status=enabled | |- 8:0:11:0 sdz 65:144 failed undef running | `- 9:0:9:0 sdbf 67:144 failed undef running `-+- policy='service-time 0' prio=0 status=enabled |- 8:0:12:0 sdae 65:224 failed undef running `- 9:0:12:0 sdbo 68:32 failed undef running $ ./sgio_inquiry /dev/mapper/85ag56 sg_simple0: Inquiry SG_IO ioctl error: Inappropriate ioctl for device 4) dmesg shows that scsi_verify_blk_ioctl() failed for SG_IO (0x2285); it returns -ENOIOCTLCMD, later replaced with -ENOTTY in vfs_ioctl(). $ dmesg <...> [] device-mapper: multipath: Failing path 65:144. [] device-mapper: multipath: Failing path 67:144. [] device-mapper: multipath: Failing path 65:224. [] device-mapper: multipath: Failing path 68:32. [] sgio_inquiry: sending ioctl 2285 to a partition! 5) The ioctl() only works if the SYS_CAP_RAWIO capability is present (then queueing happens -- in this example, queue_if_no_path is set); this is due to a conditional check in scsi_verify_blk_ioctl(). # capsh --drop=cap_sys_rawio -- -c './sgio_inquiry /dev/mapper/85ag56' sg_simple0: Inquiry SG_IO ioctl error: Inappropriate ioctl for device # ./sgio_inquiry /dev/mapper/85ag56 & [1] 72830 # cat /proc/72830/stack [<c00000171c0df700>] 0xc00000171c0df700 [<c000000000015934>] __switch_to+0x204/0x350 [<c000000000152d4c>] msleep+0x5c/0x80 [<c00000000077dfb0>] dm_blk_ioctl+0x70/0x170 [<c000000000487c40>] blkdev_ioctl+0x2b0/0x9b0 [<c0000000003128e4>] block_ioctl+0x64/0xd0 [<c0000000002dd3b0>] do_vfs_ioctl+0x490/0x780 [<c0000000002dd774>] SyS_ioctl+0xd4/0xf0 [<c000000000009358>] system_call+0x38/0xd0 6) This is the function call chain exercised in this analysis: SYSCALL_DEFINE3(ioctl, <...>) @ fs/ioctl.c -> do_vfs_ioctl() -> vfs_ioctl() ... error = filp->f_op->unlocked_ioctl(filp, cmd, arg); ... -> dm_blk_ioctl() @ drivers/md/dm.c -> multipath_ioctl() @ drivers/md/dm-mpath.c ... (bdev = NULL, due to no active paths) ... if (!bdev || <...>) { int err = scsi_verify_blk_ioctl(NULL, cmd); if (err) r = err; } ... -> scsi_verify_blk_ioctl() @ block/scsi_ioctl.c ... if (bd && bd == bd->bd_contains) // not taken (bd = NULL) return 0; ... if (capable(CAP_SYS_RAWIO)) // not taken (unprivileged user) return 0; ... printk_ratelimited(KERN_WARNING "%s: sending ioctl %x to a partition!\n" <...>); return -ENOIOCTLCMD; <- ... return r ? : <...> <- ... if (error == -ENOIOCTLCMD) error = -ENOTTY; out: return error; ... Links: [1] http://git.qemu.org/?p=qemu.git;a=commit;h=336a6915bc7089fb20fea4ba99972ad9a97c5f52 [2] https://libvirt.org/formatdomain.html#elementsDisks (see 'disk' -> 'device') [3] http://tldp.org/HOWTO/SCSI-Generic-HOWTO/pexample.html (Revision 1.2, 2002-05-03) Signed-off-by: Mauricio Faria de Oliveira <mauricfo@linux.vnet.ibm.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2016-02-17dm btree: fix leak of bufio-backed block in btree_split_sibling error pathMike Snitzer
commit 30ce6e1cc5a0f781d60227e9096c86e188d2c2bd upstream. The block allocated at the start of btree_split_sibling() is never released if later insert_at() fails. Fix this by releasing the previously allocated bufio block using unlock_block(). Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-09md/raid5: fix locking in handle_stripe_clean_event()Roman Gushchin
commit b8a9d66d043ffac116100775a469f05f5158c16f upstream. After commit 566c09c53455 ("raid5: relieve lock contention in get_active_stripe()") __find_stripe() is called under conf->hash_locks + hash. But handle_stripe_clean_event() calls remove_hash() under conf->device_lock. Under some cirscumstances the hash chain can be circuited, and we get an infinite loop with disabled interrupts and locked hash lock in __find_stripe(). This leads to hard lockup on multiple CPUs and following system crash. I was able to reproduce this behavior on raid6 over 6 ssd disks. The devices_handle_discard_safely option should be set to enable trim support. The following script was used: for i in `seq 1 32`; do dd if=/dev/zero of=large$i bs=10M count=100 & done neilb: original was against a 3.x kernel. I forward-ported to 4.3-rc. This verison is suitable for any kernel since Commit: 59fc630b8b5f ("RAID5: batch adjacent full stripe write") (v4.1+). I'll post a version for earlier kernels to stable. Signed-off-by: Roman Gushchin <klamm@yandex-team.ru> Fixes: 566c09c53455 ("raid5: relieve lock contention in get_active_stripe()") Signed-off-by: NeilBrown <neilb@suse.com> Cc: Shaohua Li <shli@kernel.org> Cc: <stable@vger.kernel.org> # 3.13 - 4.2 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-09Revert "md: allow a partially recovered device to be hot-added to an array."NeilBrown
commit d01552a76d71f9879af448e9142389ee9be6e95b upstream. This reverts commit 7eb418851f3278de67126ea0c427641ab4792c57. This commit is poorly justified, I can find not discusison in email, and it clearly causes a problem. If a device which is being recovered fails and is subsequently re-added to an array, there could easily have been changes to the array *before* the point where the recovery was up to. So the recovery must start again from the beginning. If a spare is being recovered and fails, then when it is re-added we really should do a bitmap-based recovery up to the recovery-offset, and then a full recovery from there. Before this reversion, we only did the "full recovery from there" which is not corect. After this reversion with will do a full recovery from the start, which is safer but not ideal. It will be left to a future patch to arrange the two different styles of recovery. Reported-and-tested-by: Nate Dailey <nate.dailey@stratus.com> Signed-off-by: NeilBrown <neilb@suse.com> Fixes: 7eb418851f32 ("md: allow a partially recovered device to be hot-added to an array.") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-09md/raid10: submit_bio_wait() returns 0 on successJes Sorensen
commit 681ab4696062f5aa939c9e04d058732306a97176 upstream. This was introduced with 9e882242c6193ae6f416f2d8d8db0d9126bd996b which changed the return value of submit_bio_wait() to return != 0 on error, but didn't update the caller accordingly. Fixes: 9e882242c6 ("block: Add submit_bio_wait(), remove from md") Reported-by: Bill Kuzeja <William.Kuzeja@stratus.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-09md/raid1: submit_bio_wait() returns 0 on successJes Sorensen
commit 203d27b0226a05202438ddb39ef0ef1acb14a759 upstream. This was introduced with 9e882242c6193ae6f416f2d8d8db0d9126bd996b which changed the return value of submit_bio_wait() to return != 0 on error, but didn't update the caller accordingly. Fixes: 9e882242c6 ("block: Add submit_bio_wait(), remove from md") Reported-by: Bill Kuzeja <William.Kuzeja@stratus.com> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-09dm btree: fix leak of bufio-backed block in btree_split_beneath error pathMike Snitzer
commit 4dcb8b57df3593dcb20481d9d6cf79d1dc1534be upstream. btree_split_beneath()'s error path had an outstanding FIXME that speaks directly to the potential for _not_ cleaning up a previously allocated bufio-backed block. Fix this by releasing the previously allocated bufio block using unlock_block(). Reported-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Acked-by: Joe Thornber <thornber@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-11-09dm btree remove: fix a bug when rebalancing nodes after removalJoe Thornber
commit 2871c69e025e8bc507651d5a9cf81a8a7da9d24b upstream. Commit 4c7e309340ff ("dm btree remove: fix bug in redistribute3") wasn't a complete fix for redistribute3(). The redistribute3 function takes 3 btree nodes and shares out the entries evenly between them. If the three nodes in total contained (MAX_ENTRIES * 3) - 1 entries between them then this was erroneously getting rebalanced as (MAX_ENTRIES - 1) on the left and right, and (MAX_ENTRIES + 1) in the center. Fix this issue by being more careful about calculating the target number of entries for the left and right nodes. Unit tested in userspace using this program: https://github.com/jthornber/redistribute3-test/blob/master/redistribute3_t.c Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-27dm thin: fix missing pool reference count decrement in pool_ctr error pathMike Snitzer
commit ba30670f4d5292c4e7f7980bbd5071f7c4794cdd upstream. Fixes: ac8c3f3df ("dm thin: generate event when metadata threshold passed") Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22dm cache: fix NULL pointer when switching from cleaner policyJoe Thornber
commit 2bffa1503c5c06192eb1459180fac4416575a966 upstream. The cleaner policy doesn't make use of the per cache block hint space in the metadata (unlike the other policies). When switching from the cleaner policy to mq or smq a NULL pointer crash (in dm_tm_new_block) was observed. The crash was caused by bugs in dm-cache-metadata.c when trying to skip creation of the hint btree. The minimal fix is to change hint size for the cleaner policy to 4 bytes (only hint size supported). Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22md: flush ->event_work before stopping array.NeilBrown
commit ee5d004fd0591536a061451eba2b187092e9127c upstream. The 'event_work' worker used by dm-raid may still be running when the array is stopped. This can result in an oops. So flush the workqueue on which it is run after detaching and before destroying the device. Reported-by: Heinz Mauelshagen <heinzm@redhat.com> Signed-off-by: NeilBrown <neilb@suse.com> Fixes: 9d09e663d550 ("dm: raid456 basic support") Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22dm raid: fix round up of default region sizeMikulas Patocka
commit 042745ee53a0a7c1f5aff191a4a24213c6dcfb52 upstream. Commit 3a0f9aaee028 ("dm raid: round region_size to power of two") intended to make sure that the default region size is a power of two. However, the logic in that commit is incorrect and sets the variable region_size to 0 or 1, depending on whether min_region_size is a power of two. Fix this logic, using roundup_pow_of_two(), so that region_size is properly rounded up to the next power of two. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 3a0f9aaee028 ("dm raid: round region_size to power of two") Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-22dm btree: add ref counting ops for the leaves of top level btreesJoe Thornber
commit b0dc3c8bc157c60b1d470163882be8c13e1950af upstream. When using nested btrees, the top leaves of the top levels contain block addresses for the root of the next tree down. If we shadow a shared leaf node the leaf values (sub tree roots) should be incremented accordingly. This is only an issue if there is metadata sharing in the top levels. Which only occurs if metadata snapshots are being used (as is possible with dm-thinp). And could result in a block from the thinp metadata snap being reused early, thus corrupting the thinp metadata snap. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-10-01md/raid10: always set reshape_safe when initializing reshape_position.NeilBrown
commit 299b0685e31c9f3dcc2d58ee3beca761a40b44b3 upstream. 'reshape_position' tracks where in the reshape we have reached. 'reshape_safe' tracks where in the reshape we have safely recorded in the metadata. These are compared to determine when to update the metadata. So it is important that reshape_safe is initialised properly. Currently it isn't. When starting a reshape from the beginning it usually has the correct value by luck. But when reducing the number of devices in a RAID10, it has the wrong value and this leads to the metadata not being updated correctly. This can lead to corruption if the reshape is not allowed to complete. This patch is suitable for any -stable kernel which supports RAID10 reshape, which is 3.5 and later. Fixes: 3ea7daa5d7fd ("md/raid10: add reshape support") Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-09-13dm thin metadata: delete btrees when releasing metadata snapshotJoe Thornber
commit 7f518ad0a212e2a6fd68630e176af1de395070a7 upstream. The device details and mapping trees were just being decremented before. Now btree_del() is called to do a deep delete. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-16md/bitmap: return an error when bitmap superblock is corrupt.NeilBrown
commit b97e92574c0bf335db1cd2ec491d8ff5cd5d0b49 upstream Use separate bitmaps for each nodes in the cluster bitmap_read_sb() validates the bitmap superblock that it reads in. If it finds an inconsistency like a bad magic number or out-of-range version number, it prints an error and returns, but it incorrectly returns zero, so the array is still assembled with the (invalid) bitmap. This means it could try to use a bitmap with a new version number which it therefore does not understand. This bug was introduced in 3.5 and fix as part of a larger patch in 4.1. So the patch is suitable for any -stable kernel in that range. Fixes: 27581e5ae01f ("md/bitmap: centralise allocation of bitmap file pages.") Signed-off-by: NeilBrown <neilb@suse.com> Reported-by: GuoQing Jiang <gqjiang@suse.com>
2015-08-16md/raid1: extend spinlock to protect raid1_end_read_request against ↵NeilBrown
inconsistencies commit 423f04d63cf421ea436bcc5be02543d549ce4b28 upstream. raid1_end_read_request() assumes that the In_sync bits are consistent with the ->degaded count. raid1_spare_active updates the In_sync bit before the ->degraded count and so exposes an inconsistency, as does error() So extend the spinlock in raid1_spare_active() and error() to hide those inconsistencies. This should probably be part of Commit: 34cab6f42003 ("md/raid1: fix test for 'was read error from last working device'.") as it addresses the same issue. It fixes the same bug and should go to -stable for same reasons. Fixes: 76073054c95b ("md/raid1: clean up read_balance.") Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-16md: use kzalloc() when bitmap is disabledBenjamin Randazzo
commit b6878d9e03043695dbf3fa1caa6dfc09db225b16 upstream. In drivers/md/md.c get_bitmap_file() uses kmalloc() for creating a mdu_bitmap_file_t called "file". 5769 file = kmalloc(sizeof(*file), GFP_NOIO); 5770 if (!file) 5771 return -ENOMEM; This structure is copied to user space at the end of the function. 5786 if (err == 0 && 5787 copy_to_user(arg, file, sizeof(*file))) 5788 err = -EFAULT But if bitmap is disabled only the first byte of "file" is initialized with zero, so it's possible to read some bytes (up to 4095) of kernel space memory from user space. This is an information leak. 5775 /* bitmap disabled, zero the first byte and copy out */ 5776 if (!mddev->bitmap_info.file) 5777 file->pathname[0] = '\0'; Signed-off-by: Benjamin Randazzo <benjamin@randazzo.fr> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-10md/raid1: fix test for 'was read error from last working device'.NeilBrown
commit 34cab6f42003cb06f48f86a86652984dec338ae9 upstream. When we get a read error from the last working device, we don't try to repair it, and don't fail the device. We simple report a read error to the caller. However the current test for 'is this the last working device' is wrong. When there is only one fully working device, it assumes that a non-faulty device is that device. However a spare which is rebuilding would be non-faulty but so not the only working device. So change the test from "!Faulty" to "In_sync". If ->degraded says there is only one fully working device and this device is in_sync, this must be the one. This bug has existed since we allowed read_balance to read from a recovering spare in v3.0 Reported-and-tested-by: Alexander Lyakas <alex.bolshoy@gmail.com> Fixes: 76073054c95b ("md/raid1: clean up read_balance.") Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03md: fix a build warningFiro Yang
commit 4e023612325a9034a542bfab79f78b1fe5ebb841 upstream. Warning like this: drivers/md/md.c: In function "update_array_info": drivers/md/md.c:6394:26: warning: logical not is only applied to the left hand side of comparison [-Wlogical-not-parentheses] !mddev->persistent != info->not_persistent|| Fix it as Neil Brown said: mddev->persistent != !info->not_persistent || Signed-off-by: Firo Yang <firogm@gmail.com> Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03dm btree: silence lockdep lock inversion in dm_btree_del()Joe Thornber
commit 1c7518794a3647eb345d59ee52844e8a40405198 upstream. Allocate memory using GFP_NOIO when deleting a btree. dm_btree_del() can be called via an ioctl and we don't want to recurse into the FS or block layer. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03dm btree remove: fix bug in redistribute3Dennis Yang
commit 4c7e309340ff85072e96f529582d159002c36734 upstream. redistribute3() shares entries out across 3 nodes. Some entries were being moved the wrong way, breaking the ordering. This manifested as a BUG() in dm-btree-remove.c:shift() when entries were removed from the btree. For additional context see: https://www.redhat.com/archives/dm-devel/2015-May/msg00113.html Signed-off-by: Dennis Yang <shinrairis@gmail.com> Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03dm space map metadata: fix occasional leak of a metadata block on resizeJoe Thornber
commit 6096d91af0b65a3967139b32d5adbb3647858a26 upstream. The metadata space map has a simplified 'bootstrap' mode that is operational when extending the space maps. Whilst in this mode it's possible for some refcount decrement operations to become queued (eg, as a result of shadowing one of the bitmap indexes). These decrements were not being applied when switching out of bootstrap mode. The effect of this bug was the leaking of a 4k metadata block. This is detected by the latest version of thin_check as a non fatal error. Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-08-03dm stats: fix divide by zero if 'number_of_areas' arg is zeroMikulas Patocka
commit dd4c1b7d0c95be1c9245118a3accc41a16f1db67 upstream. If the number_of_areas argument was zero the kernel would crash on div-by-zero. Add better input validation. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-06md/raid0: fix restore to sector variable in raid0_make_requestEric Work
commit a81157768a00e8cf8a7b43b5ea5cac931262374f upstream. The variable "sector" in "raid0_make_request()" was improperly updated by a call to "sector_div()" which modifies its first argument in place. Commit 47d68979cc968535cb87f3e5f2e6a3533ea48fbd restored this variable after the call for later re-use. Unfortunetly the restore was done after the referenced variable "bio" was advanced. This lead to the original value and the restored value being different. Here we move this line to the proper place. One observed side effect of this bug was discarding a file though unlinking would cause an unrelated file's contents to be discarded. Signed-off-by: NeilBrown <neilb@suse.de> Fixes: 47d68979cc96 ("md/raid0: fix bug with chunksize not a power of 2.") URL: https://bugzilla.kernel.org/show_bug.cgi?id=98501 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-06-06md/raid5: don't record new size if resize_stripes fails.NeilBrown
commit 6e9eac2dcee5e19f125967dd2be3e36558c42fff upstream. If any memory allocation in resize_stripes fails we will return -ENOMEM, but in some cases we update conf->pool_size anyway. This means that if we try again, the allocations will be assumed to be larger than they are, and badness results. So only update pool_size if there is no error. This bug was introduced in 2.6.17 and the patch is suitable for -stable. Fixes: ad01c9e3752f ("[PATCH] md: Allow stripes to be expanded in preparation for expanding an array") Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-17Revert "dm crypt: fix deadlock when async crypto algorithm returns -EBUSY"Rabin Vincent
commit c0403ec0bb5a8c5b267fb7e16021bec0b17e4964 upstream. This reverts Linux 4.1-rc1 commit 0618764cb25f6fa9fb31152995de42a8a0496475. The problem which that commit attempts to fix actually lies in the Freescale CAAM crypto driver not dm-crypt. dm-crypt uses CRYPTO_TFM_REQ_MAY_BACKLOG. This means the the crypto driver should internally backlog requests which arrive when the queue is full and process them later. Until the crypto hw's queue becomes full, the driver returns -EINPROGRESS. When the crypto hw's queue if full, the driver returns -EBUSY, and if CRYPTO_TFM_REQ_MAY_BACKLOG is set, is expected to backlog the request and process it when the hardware has queue space. At the point when the driver takes the request from the backlog and starts processing it, it calls the completion function with a status of -EINPROGRESS. The completion function is called (for a second time, in the case of backlogged requests) with a status/err of 0 when a request is done. Crypto drivers for hardware without hardware queueing use the helpers, crypto_init_queue(), crypto_enqueue_request(), crypto_dequeue_request() and crypto_get_backlog() helpers to implement this behaviour correctly, while others implement this behaviour without these helpers (ccp, for example). dm-crypt (before the patch that needs reverting) uses this API correctly. It queues up as many requests as the hw queues will allow (i.e. as long as it gets back -EINPROGRESS from the request function). Then, when it sees at least one backlogged request (gets -EBUSY), it waits till that backlogged request is handled (completion gets called with -EINPROGRESS), and then continues. The references to af_alg_wait_for_completion() and af_alg_complete() in that commit's commit message are irrelevant because those functions only handle one request at a time, unlink dm-crypt. The problem is that the Freescale CAAM driver, which that commit describes as having being tested with, fails to implement the backlogging behaviour correctly. In cam_jr_enqueue(), if the hardware queue is full, it simply returns -EBUSY without backlogging the request. What the observed deadlock was is not described in the commit message but it is obviously the wait_for_completion() in crypto_convert() where dm-crypto would wait for the completion being called with -EINPROGRESS in the case of backlogged requests. This completion will never be completed due to the bug in the CAAM driver. Commit 0618764cb25 incorrectly made dm-crypt wait for every request, even when the driver/hardware queues are not full, which means that dm-crypt will never see -EBUSY. This means that that commit will cause a performance regression on all crypto drivers which implement the API correctly. Revert it. Correct backlog handling should be implemented in the CAAM driver instead. Cc'ing stable purely because commit 0618764cb25 did. If for some reason a stable@ kernel did pick up commit 0618764cb25 it should get reverted. Signed-off-by: Rabin Vincent <rabin.vincent@axis.com> Reviewed-by: Horia Geanta <horia.geanta@freescale.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06dm crypt: fix deadlock when async crypto algorithm returns -EBUSYBen Collins
commit 0618764cb25f6fa9fb31152995de42a8a0496475 upstream. I suspect this doesn't show up for most anyone because software algorithms typically don't have a sense of being too busy. However, when working with the Freescale CAAM driver it will return -EBUSY on occasion under heavy -- which resulted in dm-crypt deadlock. After checking the logic in some other drivers, the scheme for crypt_convert() and it's callback, kcryptd_async_done(), were not correctly laid out to properly handle -EBUSY or -EINPROGRESS. Fix this by using the completion for both -EBUSY and -EINPROGRESS. Now crypt_convert()'s use of completion is comparable to af_alg_wait_for_completion(). Similarly, kcryptd_async_done() follows the pattern used in af_alg_complete(). Before this fix dm-crypt would lockup within 1-2 minutes running with the CAAM driver. Fix was regression tested against software algorithms on PPC32 and x86_64, and things seem perfectly happy there as well. Signed-off-by: Ben Collins <ben.c@servergy.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-05-06md/raid0: fix bug with chunksize not a power of 2.NeilBrown
commit 47d68979cc968535cb87f3e5f2e6a3533ea48fbd upstream. Since commit 20d0189b1012a37d2533a87fb451f7852f2418d1 in v3.14-rc1 RAID0 has performed incorrect calculations when the chunksize is not a power of 2. This happens because "sector_div()" modifies its first argument, but this wasn't taken into account in the patch. So restore that first arg before re-using the variable. Reported-by: Joe Landman <joe.landman@gmail.com> Reported-by: Dave Chinner <david@fromorbit.com> Fixes: 20d0189b1012a37d2533a87fb451f7852f2418d1 Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-13dm io: deal with wandering queue limits when handling REQ_DISCARD and ↵Darrick J. Wong
REQ_WRITE_SAME commit e5db29806b99ce2b2640d2e4d4fcb983cea115c5 upstream. Since it's possible for the discard and write same queue limits to change while the upper level command is being sliced and diced, fix up both of them (a) to reject IO if the special command is unsupported at the start of the function and (b) read the limits once and let the commands error out on their own if the status happens to change. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-04-13dm: hold suspend_lock while suspending device during device deletionMikulas Patocka
commit ab7c7bb6f4ab95dbca96fcfc4463cd69843e3e24 upstream. __dm_destroy() must take the suspend_lock so that its presuspend and postsuspend calls do not race with an internal suspend. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18dm snapshot: fix a possible invalid memory access on unloadMikulas Patocka
commit 22aa66a3ee5b61e0f4a0bfeabcaa567861109ec3 upstream. When the snapshot target is unloaded, snapshot_dtr() waits until pending_exceptions_count drops to zero. Then, it destroys the snapshot. Therefore, the function that decrements pending_exceptions_count should not touch the snapshot structure after the decrement. pending_complete() calls free_pending_exception(), which decrements pending_exceptions_count, and then it performs up_write(&s->lock) and it calls retry_origin_bios() which dereferences s->origin. These two memory accesses to the fields of the snapshot may touch the dm_snapshot struture after it is freed. This patch moves the call to free_pending_exception() to the end of pending_complete(), so that the snapshot will not be destroyed while pending_complete() is in progress. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2015-03-18dm: fix a race condition in dm_get_mdMikulas Patocka
commit 2bec1f4a8832e74ebbe859f176d8a9cb20dd97f4 upstream. The function dm_get_md finds a device mapper device with a given dev_t, increases the reference count and returns the pointer. dm_get_md calls dm_find_md, dm_find_md takes _minor_lock, finds the device, tests that the device doesn't have DMF_DELETING or DMF_FREEING flag, drops _minor_lock and returns pointer to the device. dm_get_md then calls dm_get. dm_get calls BUG if the device has the DMF_FREEING flag, otherwise it increments the reference count. There is a possible race condition - after dm_find_md exits and before dm_get is called, there are no locks held, so the device may disappear or DMF_FREEING flag may be set, which results in BUG. To fix this bug, we need to call dm_get while we hold _minor_lock. This patch renames dm_find_md to dm_get_md and changes it so that it calls dm_get while holding the lock. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit 1.2.3-korg (git 2.39.0) at 2024-06-26 16:15:16 +0000