diff options
Diffstat (limited to 'drivers/tty/serial')
| -rw-r--r-- | drivers/tty/serial/8250/8250_omap.c | 4 | ||||
| -rw-r--r-- | drivers/tty/serial/8250/8250_pci.c | 11 | ||||
| -rw-r--r-- | drivers/tty/serial/atmel_serial.c | 1 | ||||
| -rw-r--r-- | drivers/tty/serial/sccnxp.c | 15 | ||||
| -rw-r--r-- | drivers/tty/serial/sh-sci.c | 2 |
5 files changed, 28 insertions, 5 deletions
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index 531d76a276e4..89974a112cab 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -612,6 +612,10 @@ static int omap_8250_startup(struct uart_port *port) up->lsr_saved_flags = 0; up->msr_saved_flags = 0; + /* Disable DMA for console UART */ + if (uart_console(port)) + up->dma = NULL; + if (up->dma) { ret = serial8250_request_dma(up); if (ret) { diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index bbb85a6f0e90..be5747c6883d 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -5401,6 +5401,17 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */ pbn_b2_4_115200 }, /* + * BrainBoxes UC-260 + */ + { PCI_VENDOR_ID_INTASHIELD, 0x0D21, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00, + pbn_b2_4_115200 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0E34, + PCI_ANY_ID, PCI_ANY_ID, + PCI_CLASS_COMMUNICATION_MULTISERIAL << 8, 0xffff00, + pbn_b2_4_115200 }, + /* * Perle PCI-RAS cards */ { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9030, diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index 1f45a0302b7c..839ba41b6232 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -1687,6 +1687,7 @@ static void atmel_get_ip_name(struct uart_port *port) switch (version) { case 0x302: case 0x10213: + case 0x10302: dev_dbg(port->dev, "This version is usart\n"); atmel_port->is_usart = true; break; diff --git a/drivers/tty/serial/sccnxp.c b/drivers/tty/serial/sccnxp.c index fcf803ffad19..cdd2f942317c 100644 --- a/drivers/tty/serial/sccnxp.c +++ b/drivers/tty/serial/sccnxp.c @@ -884,14 +884,19 @@ static int sccnxp_probe(struct platform_device *pdev) clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) { - if (PTR_ERR(clk) == -EPROBE_DEFER) { - ret = -EPROBE_DEFER; + ret = PTR_ERR(clk); + if (ret == -EPROBE_DEFER) goto err_out; - } + uartclk = 0; + } else { + clk_prepare_enable(clk); + uartclk = clk_get_rate(clk); + } + + if (!uartclk) { dev_notice(&pdev->dev, "Using default clock frequency\n"); uartclk = s->chip->freq_std; - } else - uartclk = clk_get_rate(clk); + } /* Check input frequency */ if ((uartclk < s->chip->freq_min) || (uartclk > s->chip->freq_max)) { diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index 19316609d4f9..c8c564c71c75 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -736,6 +736,8 @@ static void sci_receive_chars(struct uart_port *port) /* Tell the rest of the system the news. New characters! */ tty_flip_buffer_push(tport); } else { + /* TTY buffers full; read from RX reg to prevent lockup */ + serial_port_in(port, SCxRDR); serial_port_in(port, SCxSR); /* dummy read */ serial_port_out(port, SCxSR, SCxSR_RDxF_CLEAR(port)); } |