path: root/bsp/routerstationpro/generic-openwrt-include-files.patch

From b30744eb2b2163eee346ef366519ac66c789fb2a Mon Sep 17 00:00:00 2001
From: Paul Gortmaker <paul.gortmaker@windriver.com>
Date: Tue, 17 Jul 2012 11:31:21 -0400
Subject: [PATCH 001/123] generic openwrt include files

Import of the openwrt files from trunk, as of this commit:

 ----------
commit c1d79f64eed0a7ac36b5b9bca52275b397bec424
Author: nbd <nbd@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date:   Mon Jul 16 16:26:51 2012 +0000

    uboot-ar71xx: fix compile on recent mac os x versions

    git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32750 3c298f89-4303-0410-b956-a3cf2f4a3e73
 ----------

Due to the nature of how the openwrt source is managed, new
files are found separate from the commits which actually
make use of them, so that unused stuff could not easily
be left behind, but it is what it is.

Path to files in the repo is: target/linux/generic/files
Repo is: git://nbd.name/openwrt.git

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
---
 include/linux/ar8216_platform.h |   81 +++++++++++++
 include/linux/ath5k_platform.h  |   30 +++++
 include/linux/ath9k_platform.h  |    4 +
 include/linux/glamo-engine.h    |   27 +++++
 include/linux/glamofb.h         |   35 ++++++
 include/linux/gpio_buttons.h    |   33 ++++++
 include/linux/gpio_dev.h        |   42 +++++++
 include/linux/myloader.h        |  121 ++++++++++++++++++++
 include/linux/pwm/pwm.h         |  165 +++++++++++++++++++++++++++
 include/linux/rt2x00_platform.h |   23 ++++
 include/linux/rtl8366.h         |   38 +++++++
 include/linux/rtl8367.h         |   58 ++++++++++
 include/linux/switch.h          |  237 +++++++++++++++++++++++++++++++++++++++
 13 files changed, 894 insertions(+)
 create mode 100644 include/linux/ar8216_platform.h
 create mode 100644 include/linux/ath5k_platform.h
 create mode 100644 include/linux/glamo-engine.h
 create mode 100644 include/linux/glamofb.h
 create mode 100644 include/linux/gpio_buttons.h
 create mode 100644 include/linux/gpio_dev.h
 create mode 100644 include/linux/myloader.h
 create mode 100644 include/linux/pwm/pwm.h
 create mode 100644 include/linux/rt2x00_platform.h
 create mode 100644 include/linux/rtl8366.h
 create mode 100644 include/linux/rtl8367.h
 create mode 100644 include/linux/switch.h

diff --git a/include/linux/ar8216_platform.h b/include/linux/ar8216_platform.h
new file mode 100644
index 0000000..f5c2ef0
--- /dev/null
+++ b/include/linux/ar8216_platform.h
@@ -0,0 +1,81 @@
+/*
+ * AR8216 switch driver platform data
+ *
+ * Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef AR8216_PLATFORM_H
+#define AR8216_PLATFORM_H
+
+enum ar8327_pad_mode {
+	AR8327_PAD_NC = 0,
+	AR8327_PAD_MAC2MAC_MII,
+	AR8327_PAD_MAC2MAC_GMII,
+	AR8327_PAD_MAC_SGMII,
+	AR8327_PAD_MAC2PHY_MII,
+	AR8327_PAD_MAC2PHY_GMII,
+	AR8327_PAD_MAC_RGMII,
+	AR8327_PAD_PHY_GMII,
+	AR8327_PAD_PHY_RGMII,
+	AR8327_PAD_PHY_MII,
+};
+
+enum ar8327_clk_delay_sel {
+	AR8327_CLK_DELAY_SEL0 = 0,
+	AR8327_CLK_DELAY_SEL1,
+	AR8327_CLK_DELAY_SEL2,
+	AR8327_CLK_DELAY_SEL3,
+};
+
+struct ar8327_pad_cfg {
+	enum ar8327_pad_mode mode;
+	bool rxclk_sel;
+	bool txclk_sel;
+	bool pipe_rxclk_sel;
+	bool txclk_delay_en;
+	bool rxclk_delay_en;
+	enum ar8327_clk_delay_sel txclk_delay_sel;
+	enum ar8327_clk_delay_sel rxclk_delay_sel;
+};
+
+enum ar8327_port_speed {
+	AR8327_PORT_SPEED_10 = 0,
+	AR8327_PORT_SPEED_100,
+	AR8327_PORT_SPEED_1000,
+};
+
+struct ar8327_port_cfg {
+	int force_link:1;
+	enum ar8327_port_speed speed;
+	int txpause:1;
+	int rxpause:1;
+	int duplex:1;
+};
+
+struct ar8327_led_cfg {
+	u32 led_ctrl0;
+	u32 led_ctrl1;
+	u32 led_ctrl2;
+	u32 led_ctrl3;
+	bool open_drain;
+};
+
+struct ar8327_platform_data {
+	struct ar8327_pad_cfg *pad0_cfg;
+	struct ar8327_pad_cfg *pad5_cfg;
+	struct ar8327_pad_cfg *pad6_cfg;
+	struct ar8327_port_cfg cpuport_cfg;
+	struct ar8327_led_cfg *led_cfg;
+};
+
+#endif /* AR8216_PLATFORM_H */
\ No newline at end of file
diff --git a/include/linux/ath5k_platform.h b/include/linux/ath5k_platform.h
new file mode 100644
index 0000000..ec85224
--- /dev/null
+++ b/include/linux/ath5k_platform.h
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2008 Atheros Communications Inc.
+ * Copyright (c) 2009 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (c) 2009 Imre Kaloz <kaloz@openwrt.org>
+ * Copyright (c) 2010 Daniel Golle <daniel.golle@gmail.com>
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _LINUX_ATH5K_PLATFORM_H
+#define _LINUX_ATH5K_PLATFORM_H
+
+#define ATH5K_PLAT_EEP_MAX_WORDS	2048
+
+struct ath5k_platform_data {
+	u16 *eeprom_data;
+	u8 *macaddr;
+};
+
+#endif /* _LINUX_ATH5K_PLATFORM_H */
diff --git a/include/linux/ath9k_platform.h b/include/linux/ath9k_platform.h
index 6e3f54f..15b9137 100644
--- a/include/linux/ath9k_platform.h
+++ b/include/linux/ath9k_platform.h
@@ -29,9 +29,13 @@ struct ath9k_platform_data {
 	u32 gpio_mask;
 	u32 gpio_val;
 
+	bool endian_check;
 	bool is_clk_25mhz;
 	int (*get_mac_revision)(void);
 	int (*external_reset)(void);
+
+	int num_leds;
+	const struct gpio_led *leds;
 };
 
 #endif /* _LINUX_ATH9K_PLATFORM_H */
diff --git a/include/linux/glamo-engine.h b/include/linux/glamo-engine.h
new file mode 100644
index 0000000..516d45f
--- /dev/null
+++ b/include/linux/glamo-engine.h
@@ -0,0 +1,27 @@
+#ifndef __GLAMO_ENGINE_H
+#define __GLAMO_ENGINE_H
+
+enum glamo_engine {
+	GLAMO_ENGINE_CAPTURE = 0,
+	GLAMO_ENGINE_ISP = 1,
+	GLAMO_ENGINE_JPEG = 2,
+	GLAMO_ENGINE_MPEG_ENC = 3,
+	GLAMO_ENGINE_MPEG_DEC = 4,
+	GLAMO_ENGINE_LCD = 5,
+	GLAMO_ENGINE_CMDQ = 6,
+	GLAMO_ENGINE_2D = 7,
+	GLAMO_ENGINE_3D = 8,
+	GLAMO_ENGINE_MMC = 9,
+	GLAMO_ENGINE_MICROP0 = 10,
+	GLAMO_ENGINE_RISC = 11,
+	GLAMO_ENGINE_MICROP1_MPEG_ENC = 12,
+	GLAMO_ENGINE_MICROP1_MPEG_DEC = 13,
+#if 0
+	GLAMO_ENGINE_H264_DEC = 14,
+	GLAMO_ENGINE_RISC1 = 15,
+	GLAMO_ENGINE_SPI = 16,
+#endif
+	__NUM_GLAMO_ENGINES
+};
+
+#endif
diff --git a/include/linux/glamofb.h b/include/linux/glamofb.h
new file mode 100644
index 0000000..5f9fab5
--- /dev/null
+++ b/include/linux/glamofb.h
@@ -0,0 +1,35 @@
+#ifndef _LINUX_GLAMOFB_H
+#define _LINUX_GLAMOFB_H
+
+#include <linux/fb.h>
+
+#ifdef __KERNEL__
+
+struct glamo_core;
+struct glamofb_handle;
+
+struct glamo_fb_platform_data {
+    int width, height;
+
+    int num_modes;
+    struct fb_videomode *modes;
+
+    struct glamo_core *core;
+};
+
+int glamofb_cmd_mode(struct glamofb_handle *gfb, int on);
+int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val);
+
+#ifdef CONFIG_MFD_GLAMO
+void glamo_lcm_reset(struct platform_device *pdev, int level);
+#else
+#define glamo_lcm_reset(...) do {} while (0)
+#endif
+
+#endif
+
+#define GLAMOFB_ENGINE_ENABLE _IOW('F', 0x1, __u32)
+#define GLAMOFB_ENGINE_DISABLE _IOW('F', 0x2, __u32)
+#define GLAMOFB_ENGINE_RESET _IOW('F', 0x3, __u32)
+
+#endif
diff --git a/include/linux/gpio_buttons.h b/include/linux/gpio_buttons.h
new file mode 100644
index 0000000..f85b993
--- /dev/null
+++ b/include/linux/gpio_buttons.h
@@ -0,0 +1,33 @@
+/*
+ *  Definitions for the GPIO buttons interface driver
+ *
+ *  Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This file was based on: /include/linux/gpio_keys.h
+ *	The original gpio_keys.h seems not to have a license.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#ifndef _GPIO_BUTTONS_H_
+#define _GPIO_BUTTONS_H_
+
+struct gpio_button {
+	int	gpio;		/* GPIO line number */
+	int	active_low;
+	char	*desc;		/* button description */
+	int	type;		/* input event type (EV_KEY, EV_SW) */
+	int	code;		/* input event code (KEY_*, SW_*) */
+	int	threshold;	/* count threshold */
+};
+
+struct gpio_buttons_platform_data {
+	struct gpio_button *buttons;
+	int	nbuttons;		/* number of buttons */
+	int	poll_interval;		/* polling interval */
+};
+
+#endif /* _GPIO_BUTTONS_H_ */
diff --git a/include/linux/gpio_dev.h b/include/linux/gpio_dev.h
new file mode 100644
index 0000000..5e610a0
--- /dev/null
+++ b/include/linux/gpio_dev.h
@@ -0,0 +1,42 @@
+#ifndef _GPIO_DEV_H__
+#define _GPIO_DEV_H__
+
+/*********************************************************************
+ *
+ * This Linux kernel header is expanded from the original driver
+ * (gpio_dev) by John Crispin. It provides an ioctl based interface to
+ * GPIO pins via the /dev/gpio char device and gpiolib within the kernel.
+ * The third argument to each ioctl is the GPIO pin number.
+ *
+ * This driver has been tested with lk 2.6.31 and works. The original
+ * driver fails quietly with this version. The protocol is now a bit
+ * different: the ioctl(fd, GPIO_REQUEST, <pin>) should be called
+ * after the open("/dev/gpio", O_RDWR) to determine if the <pin> is
+ * already in use. If the ioctl is successful (i.e. returns 0 for not
+ * in use) then the <pin> is claimed by this driver and
+ * ioctl(fd, GPIO_FREE, <pin>) should be called prior to close(fd) .
+ *
+ * See <kernel_source>/Documentation/gpio.txt
+ * Note that kernel designers prefer the use of the sysfs gpio interface.
+ * This char driver is easier to use from code and faster.
+ ********************************************************************/
+
+/* This header can be included in both the user and kernel spaces */
+/* The _IO macro is defined in sys/ioctl.h */
+
+#define IOC_GPIODEV_MAGIC  'B'
+
+#define GPIO_GET        _IO(IOC_GPIODEV_MAGIC, 10)
+#define GPIO_SET        _IO(IOC_GPIODEV_MAGIC, 11)
+#define GPIO_CLEAR      _IO(IOC_GPIODEV_MAGIC, 12)
+#define GPIO_DIR_IN     _IO(IOC_GPIODEV_MAGIC, 13)
+#define GPIO_DIR_OUT    _IO(IOC_GPIODEV_MAGIC, 14)
+        /* Sets the direction out and clears the <pin> (low) */
+
+#define GPIO_DIR_HIGH   _IO(IOC_GPIODEV_MAGIC, 15)
+        /* Sets the direction out and sets the <pin> (high) */
+#define GPIO_REQUEST    _IO(IOC_GPIODEV_MAGIC, 16)
+#define GPIO_FREE       _IO(IOC_GPIODEV_MAGIC, 17)
+#define GPIO_CAN_SLEEP  _IO(IOC_GPIODEV_MAGIC, 18)
+
+#endif
diff --git a/include/linux/myloader.h b/include/linux/myloader.h
new file mode 100644
index 0000000..d89e415
--- /dev/null
+++ b/include/linux/myloader.h
@@ -0,0 +1,121 @@
+/*
+ *  Compex's MyLoader specific definitions
+ *
+ *  Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ *
+ */
+
+#ifndef _MYLOADER_H_
+#define _MYLOADER_H_
+
+/* Myloader specific magic numbers */
+#define MYLO_MAGIC_SYS_PARAMS	0x20021107
+#define MYLO_MAGIC_PARTITIONS	0x20021103
+#define MYLO_MAGIC_BOARD_PARAMS	0x20021103
+
+/* Vendor ID's (seems to be same as the PCI vendor ID's) */
+#define VENID_COMPEX		0x11F6
+
+/* Devices based on the ADM5120 */
+#define DEVID_COMPEX_NP27G	0x0078
+#define DEVID_COMPEX_NP28G	0x044C
+#define DEVID_COMPEX_NP28GHS	0x044E
+#define DEVID_COMPEX_WP54Gv1C	0x0514
+#define DEVID_COMPEX_WP54G	0x0515
+#define DEVID_COMPEX_WP54AG	0x0546
+#define DEVID_COMPEX_WPP54AG	0x0550
+#define DEVID_COMPEX_WPP54G	0x0555
+
+/* Devices based on the Atheros AR2317 */
+#define DEVID_COMPEX_NP25G	0x05E6
+#define DEVID_COMPEX_WPE53G	0x05DC
+
+/* Devices based on the Atheros AR71xx */
+#define DEVID_COMPEX_WP543	0x0640
+#define DEVID_COMPEX_WPE72	0x0672
+
+/* Devices based on the IXP422 */
+#define DEVID_COMPEX_WP18	0x047E
+#define DEVID_COMPEX_NP18A	0x0489
+
+/* Other devices */
+#define DEVID_COMPEX_NP26G8M	0x03E8
+#define DEVID_COMPEX_NP26G16M	0x03E9
+
+struct mylo_partition {
+	uint16_t	flags;	/* partition flags */
+	uint16_t	type;	/* type of the partition */
+	uint32_t	addr;	/* relative address of the partition from the
+				   flash start */
+	uint32_t	size;	/* size of the partition in bytes */
+	uint32_t	param;	/* if this is the active partition, the
+				   MyLoader load code to this address */
+};
+
+#define PARTITION_FLAG_ACTIVE	0x8000 /* this is the active partition,
+					* MyLoader loads firmware from here */
+#define PARTITION_FLAG_ISRAM	0x2000 /* FIXME: this is a RAM partition? */
+#define PARTIIION_FLAG_RAMLOAD	0x1000 /* FIXME: load this partition into the RAM? */
+#define PARTITION_FLAG_PRELOAD	0x0800 /* the partition data preloaded to RAM
+					* before decompression */
+#define PARTITION_FLAG_LZMA	0x0100 /* partition data compressed by LZMA */
+#define PARTITION_FLAG_HAVEHDR  0x0002 /* the partition data have a header */
+
+#define PARTITION_TYPE_FREE	0
+#define PARTITION_TYPE_USED	1
+
+#define MYLO_MAX_PARTITIONS	8	/* maximum number of partitions in the
+					   partition table */
+
+struct mylo_partition_table {
+	uint32_t	magic;		/* must be MYLO_MAGIC_PARTITIONS */
+	uint32_t	res0;		/* unknown/unused */
+	uint32_t	res1;		/* unknown/unused */
+	uint32_t 	res2;		/* unknown/unused */
+	struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
+};
+
+struct mylo_partition_header {
+	uint32_t	len;		/* length of the partition data */
+	uint32_t	crc;		/* CRC value of the partition data */
+};
+
+struct mylo_system_params {
+	uint32_t	magic;		/* must be MYLO_MAGIC_SYS_PARAMS */
+	uint32_t	res0;
+	uint32_t	res1;
+	uint32_t	mylo_ver;
+	uint16_t	vid;		/* Vendor ID */
+	uint16_t	did;		/* Device ID */
+	uint16_t	svid;		/* Sub Vendor ID */
+	uint16_t	sdid;		/* Sub Device ID */
+	uint32_t	rev;		/* device revision */
+	uint32_t	fwhi;
+	uint32_t	fwlo;
+	uint32_t	tftp_addr;
+	uint32_t	prog_start;
+	uint32_t	flash_size;	/* size of boot FLASH in bytes */
+	uint32_t	dram_size;	/* size of onboard RAM in bytes */
+};
+
+struct mylo_eth_addr {
+	uint8_t	mac[6];
+	uint8_t	csum[2];
+};
+
+#define MYLO_ETHADDR_COUNT	8	/* maximum number of ethernet address
+					   in the board parameters */
+
+struct mylo_board_params {
+	uint32_t	magic;	/* must be MYLO_MAGIC_BOARD_PARAMS */
+	uint32_t	res0;
+	uint32_t	res1;
+	uint32_t	res2;
+	struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
+};
+
+#endif /* _MYLOADER_H_*/
diff --git a/include/linux/pwm/pwm.h b/include/linux/pwm/pwm.h
new file mode 100644
index 0000000..e01cca9
--- /dev/null
+++ b/include/linux/pwm/pwm.h
@@ -0,0 +1,165 @@
+/*
+ * include/linux/pwm.h
+ *
+ * Copyright (C) 2008 Bill Gatliff < bgat@billgatliff.com>
+ *
+ * This program is free software; you may redistribute and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
+ * USA
+ */
+#ifndef __LINUX_PWM_H
+#define __LINUX_PWM_H
+
+enum {
+	PWM_CONFIG_DUTY_TICKS = BIT(0),
+	PWM_CONFIG_PERIOD_TICKS = BIT(1),
+	PWM_CONFIG_POLARITY = BIT(2),
+	PWM_CONFIG_START = BIT(3),
+	PWM_CONFIG_STOP = BIT(4),
+
+	PWM_CONFIG_HANDLER = BIT(5),
+
+	PWM_CONFIG_DUTY_NS = BIT(6),
+	PWM_CONFIG_DUTY_PERCENT = BIT(7),
+	PWM_CONFIG_PERIOD_NS = BIT(8),
+};
+
+struct pwm_channel;
+struct work_struct;
+
+typedef int (*pwm_handler_t)(struct pwm_channel *p, void *data);
+typedef void (*pwm_callback_t)(struct pwm_channel *p);
+
+struct pwm_channel_config {
+	int config_mask;
+	unsigned long duty_ticks;
+	unsigned long period_ticks;
+	int polarity;
+
+	pwm_handler_t handler;
+
+	unsigned long duty_ns;
+	unsigned long period_ns;
+	int duty_percent;
+};
+
+struct pwm_device {
+	struct list_head list;
+	spinlock_t list_lock;
+	struct device *dev;
+	struct module *owner;
+	struct pwm_channel *channels;
+
+	const char *bus_id;
+	int nchan;
+
+	int	(*request)	(struct pwm_channel *p);
+	void	(*free)		(struct pwm_channel *p);
+	int	(*config)	(struct pwm_channel *p,
+				 struct pwm_channel_config *c);
+	int	(*config_nosleep)(struct pwm_channel *p,
+				  struct pwm_channel_config *c);
+	int	(*synchronize)	(struct pwm_channel *p,
+				 struct pwm_channel *to_p);
+	int	(*unsynchronize)(struct pwm_channel *p,
+				 struct pwm_channel *from_p);
+	int	(*set_callback)	(struct pwm_channel *p,
+				 pwm_callback_t callback);
+};
+
+int pwm_register(struct pwm_device *pwm);
+int pwm_unregister(struct pwm_device *pwm);
+
+enum {
+	FLAG_REQUESTED = 0,
+	FLAG_STOP = 1,
+};
+
+struct pwm_channel {
+	struct list_head list;
+	struct pwm_device *pwm;
+	const char *requester;
+	pid_t pid;
+	int chan;
+	unsigned long flags;
+	unsigned long tick_hz;
+
+	spinlock_t lock;
+	struct completion complete;
+
+	pwm_callback_t callback;
+
+	struct work_struct handler_work;
+	pwm_handler_t handler;
+	void *handler_data;
+
+	int active_high;
+	unsigned long period_ticks;
+	unsigned long duty_ticks;
+};
+
+struct gpio_pwm_platform_data {
+	int gpio;
+};
+
+struct pwm_channel *
+pwm_request(const char *bus_id, int chan,
+	    const char *requester);
+
+void pwm_free(struct pwm_channel *pwm);
+
+int pwm_config_nosleep(struct pwm_channel *pwm,
+		       struct pwm_channel_config *c);
+
+int pwm_config(struct pwm_channel *pwm,
+	       struct pwm_channel_config *c);
+
+unsigned long pwm_ns_to_ticks(struct pwm_channel *pwm,
+			      unsigned long nsecs);
+
+unsigned long pwm_ticks_to_ns(struct pwm_channel *pwm,
+			      unsigned long ticks);
+
+int pwm_set_period_ns(struct pwm_channel *pwm,
+		      unsigned long period_ns);
+
+unsigned long int pwm_get_period_ns(struct pwm_channel *pwm);
+
+int pwm_set_duty_ns(struct pwm_channel *pwm,
+		    unsigned long duty_ns);
+
+int pwm_set_duty_percent(struct pwm_channel *pwm,
+			 int percent);
+
+unsigned long pwm_get_duty_ns(struct pwm_channel *pwm);
+
+int pwm_set_polarity(struct pwm_channel *pwm,
+		     int active_high);
+
+int pwm_start(struct pwm_channel *pwm);
+
+int pwm_stop(struct pwm_channel *pwm);
+
+int pwm_set_handler(struct pwm_channel *pwm,
+		    pwm_handler_t handler,
+		    void *data);
+
+int pwm_synchronize(struct pwm_channel *p,
+		    struct pwm_channel *to_p);
+
+
+int pwm_unsynchronize(struct pwm_channel *p,
+		      struct pwm_channel *from_p);
+
+
+#endif /* __LINUX_PWM_H */
diff --git a/include/linux/rt2x00_platform.h b/include/linux/rt2x00_platform.h
new file mode 100644
index 0000000..e10377e
--- /dev/null
+++ b/include/linux/rt2x00_platform.h
@@ -0,0 +1,23 @@
+/*
+ * Platform data definition for the rt2x00 driver
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ */
+
+#ifndef _RT2X00_PLATFORM_H
+#define _RT2X00_PLATFORM_H
+
+struct rt2x00_platform_data {
+	char *eeprom_file_name;
+	const u8 *mac_address;
+
+	int disable_2ghz;
+	int disable_5ghz;
+};
+
+#endif /* _RT2X00_PLATFORM_H */
diff --git a/include/linux/rtl8366.h b/include/linux/rtl8366.h
new file mode 100644
index 0000000..22ce614
--- /dev/null
+++ b/include/linux/rtl8366.h
@@ -0,0 +1,38 @@
+/*
+ * Platform data definition for the Realtek RTL8366RB/S ethernet switch driver
+ *
+ * Copyright (C) 2009-2010 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _RTL8366_H
+#define _RTL8366_H
+
+#define RTL8366_DRIVER_NAME	"rtl8366"
+#define RTL8366S_DRIVER_NAME	"rtl8366s"
+#define RTL8366RB_DRIVER_NAME	"rtl8366rb"
+
+enum rtl8366_type {
+	RTL8366_TYPE_UNKNOWN,
+	RTL8366_TYPE_S,
+	RTL8366_TYPE_RB,
+};
+
+struct rtl8366_initval {
+	unsigned	reg;
+	u16		val;
+};
+
+struct rtl8366_platform_data {
+	unsigned	gpio_sda;
+	unsigned	gpio_sck;
+	unsigned	num_initvals;
+	struct rtl8366_initval *initvals;
+};
+
+enum rtl8366_type rtl8366_smi_detect(struct rtl8366_platform_data *pdata);
+
+#endif /*  _RTL8366_H */
diff --git a/include/linux/rtl8367.h b/include/linux/rtl8367.h
new file mode 100644
index 0000000..aab553e
--- /dev/null
+++ b/include/linux/rtl8367.h
@@ -0,0 +1,58 @@
+/*
+ * Platform data definition for the Realtek RTL8367 ethernet switch driver
+ *
+ * Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#ifndef _RTL8367_H
+#define _RTL8367_H
+
+#define RTL8367_DRIVER_NAME	"rtl8367"
+
+enum rtl8367_port_speed {
+	RTL8367_PORT_SPEED_10 = 0,
+	RTL8367_PORT_SPEED_100,
+	RTL8367_PORT_SPEED_1000,
+};
+
+struct rtl8367_port_ability {
+	int force_mode;
+	int nway;
+	int txpause;
+	int rxpause;
+	int link;
+	int duplex;
+	enum rtl8367_port_speed speed;
+};
+
+enum rtl8367_extif_mode {
+	RTL8367_EXTIF_MODE_DISABLED = 0,
+	RTL8367_EXTIF_MODE_RGMII,
+	RTL8367_EXTIF_MODE_MII_MAC,
+	RTL8367_EXTIF_MODE_MII_PHY,
+	RTL8367_EXTIF_MODE_TMII_MAC,
+	RTL8367_EXTIF_MODE_TMII_PHY,
+	RTL8367_EXTIF_MODE_GMII,
+	RTL8367_EXTIF_MODE_RGMII_33V,
+};
+
+struct rtl8367_extif_config {
+	unsigned int txdelay;
+	unsigned int rxdelay;
+	enum rtl8367_extif_mode mode;
+	struct rtl8367_port_ability ability;
+};
+
+struct rtl8367_platform_data {
+	unsigned gpio_sda;
+	unsigned gpio_sck;
+
+	struct rtl8367_extif_config *extif0_cfg;
+	struct rtl8367_extif_config *extif1_cfg;
+};
+
+#endif /*  _RTL8367_H */
diff --git a/include/linux/switch.h b/include/linux/switch.h
new file mode 100644
index 0000000..4f4085e
--- /dev/null
+++ b/include/linux/switch.h
@@ -0,0 +1,237 @@
+/*
+ * switch.h: Switch configuration API
+ *
+ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_SWITCH_H
+#define __LINUX_SWITCH_H
+
+#include <linux/types.h>
+#include <linux/netdevice.h>
+#include <linux/netlink.h>
+#include <linux/genetlink.h>
+#ifndef __KERNEL__
+#include <netlink/netlink.h>
+#include <netlink/genl/genl.h>
+#include <netlink/genl/ctrl.h>
+#else
+#include <net/genetlink.h>
+#endif
+
+/* main attributes */
+enum {
+	SWITCH_ATTR_UNSPEC,
+	/* global */
+	SWITCH_ATTR_TYPE,
+	/* device */
+	SWITCH_ATTR_ID,
+	SWITCH_ATTR_DEV_NAME,
+	SWITCH_ATTR_ALIAS,
+	SWITCH_ATTR_NAME,
+	SWITCH_ATTR_VLANS,
+	SWITCH_ATTR_PORTS,
+	SWITCH_ATTR_CPU_PORT,
+	/* attributes */
+	SWITCH_ATTR_OP_ID,
+	SWITCH_ATTR_OP_TYPE,
+	SWITCH_ATTR_OP_NAME,
+	SWITCH_ATTR_OP_PORT,
+	SWITCH_ATTR_OP_VLAN,
+	SWITCH_ATTR_OP_VALUE_INT,
+	SWITCH_ATTR_OP_VALUE_STR,
+	SWITCH_ATTR_OP_VALUE_PORTS,
+	SWITCH_ATTR_OP_DESCRIPTION,
+	/* port lists */
+	SWITCH_ATTR_PORT,
+	SWITCH_ATTR_MAX
+};
+
+/* commands */
+enum {
+	SWITCH_CMD_UNSPEC,
+	SWITCH_CMD_GET_SWITCH,
+	SWITCH_CMD_NEW_ATTR,
+	SWITCH_CMD_LIST_GLOBAL,
+	SWITCH_CMD_GET_GLOBAL,
+	SWITCH_CMD_SET_GLOBAL,
+	SWITCH_CMD_LIST_PORT,
+	SWITCH_CMD_GET_PORT,
+	SWITCH_CMD_SET_PORT,
+	SWITCH_CMD_LIST_VLAN,
+	SWITCH_CMD_GET_VLAN,
+	SWITCH_CMD_SET_VLAN
+};
+
+/* data types */
+enum switch_val_type {
+	SWITCH_TYPE_UNSPEC,
+	SWITCH_TYPE_INT,
+	SWITCH_TYPE_STRING,
+	SWITCH_TYPE_PORTS,
+	SWITCH_TYPE_NOVAL,
+};
+
+/* port nested attributes */
+enum {
+	SWITCH_PORT_UNSPEC,
+	SWITCH_PORT_ID,
+	SWITCH_PORT_FLAG_TAGGED,
+	SWITCH_PORT_ATTR_MAX
+};
+
+#define SWITCH_ATTR_DEFAULTS_OFFSET	0x1000
+
+#ifdef __KERNEL__
+
+struct switch_dev;
+struct switch_op;
+struct switch_val;
+struct switch_attr;
+struct switch_attrlist;
+struct switch_led_trigger;
+
+int register_switch(struct switch_dev *dev, struct net_device *netdev);
+void unregister_switch(struct switch_dev *dev);
+
+/**
+ * struct switch_attrlist - attribute list
+ *
+ * @n_attr: number of attributes
+ * @attr: pointer to the attributes array
+ */
+struct switch_attrlist {
+	int n_attr;
+	const struct switch_attr *attr;
+};
+
+enum switch_port_speed {
+	SWITCH_PORT_SPEED_UNKNOWN = 0,
+	SWITCH_PORT_SPEED_10 = 10,
+	SWITCH_PORT_SPEED_100 = 100,
+	SWITCH_PORT_SPEED_1000 = 1000,
+};
+
+struct switch_port_link {
+	bool link;
+	bool duplex;
+	bool aneg;
+	bool tx_flow;
+	bool rx_flow;
+	enum switch_port_speed speed;
+};
+
+struct switch_port_stats {
+	unsigned long tx_bytes;
+	unsigned long rx_bytes;
+};
+
+/**
+ * struct switch_dev_ops - switch driver operations
+ *
+ * @attr_global: global switch attribute list
+ * @attr_port: port attribute list
+ * @attr_vlan: vlan attribute list
+ *
+ * Callbacks:
+ *
+ * @get_vlan_ports: read the port list of a VLAN
+ * @set_vlan_ports: set the port list of a VLAN
+ *
+ * @get_port_pvid: get the primary VLAN ID of a port
+ * @set_port_pvid: set the primary VLAN ID of a port
+ *
+ * @apply_config: apply all changed settings to the switch
+ * @reset_switch: resetting the switch
+ */
+struct switch_dev_ops {
+	struct switch_attrlist attr_global, attr_port, attr_vlan;
+
+	int (*get_vlan_ports)(struct switch_dev *dev, struct switch_val *val);
+	int (*set_vlan_ports)(struct switch_dev *dev, struct switch_val *val);
+
+	int (*get_port_pvid)(struct switch_dev *dev, int port, int *val);
+	int (*set_port_pvid)(struct switch_dev *dev, int port, int val);
+
+	int (*apply_config)(struct switch_dev *dev);
+	int (*reset_switch)(struct switch_dev *dev);
+
+	int (*get_port_link)(struct switch_dev *dev, int port,
+			     struct switch_port_link *link);
+	int (*get_port_stats)(struct switch_dev *dev, int port,
+			      struct switch_port_stats *stats);
+};
+
+struct switch_dev {
+	const struct switch_dev_ops *ops;
+	/* will be automatically filled */
+	char devname[IFNAMSIZ];
+
+	const char *name;
+	/* NB: either alias or netdev must be set */
+	const char *alias;
+	struct net_device *netdev;
+
+	int ports;
+	int vlans;
+	int cpu_port;
+
+	/* the following fields are internal for swconfig */
+	int id;
+	struct list_head dev_list;
+	unsigned long def_global, def_port, def_vlan;
+
+	struct mutex sw_mutex;
+	struct switch_port *portbuf;
+
+	char buf[128];
+
+#ifdef CONFIG_SWCONFIG_LEDS
+	struct switch_led_trigger *led_trigger;
+#endif
+};
+
+struct switch_port {
+	u32 id;
+	u32 flags;
+};
+
+struct switch_val {
+	const struct switch_attr *attr;
+	int port_vlan;
+	int len;
+	union {
+		const char *s;
+		u32 i;
+		struct switch_port *ports;
+	} value;
+};
+
+struct switch_attr {
+	int disabled;
+	int type;
+	const char *name;
+	const char *description;
+
+	int (*set)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val);
+	int (*get)(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val);
+
+	/* for driver internal use */
+	int id;
+	int ofs;
+	int max;
+};
+
+#endif
+
+#endif
-- 
1.7.9.7