Age | Commit message (Collapse) | Author |
|
Update Toaster to support Django 4.2, to match current
hosts and to address CVEs.
[YOCTO #15152]
(Bitbake rev: 4f5b1f5bede402295bf4dfc8845fe2f38973e157)
Signed-off-by: Kieran McNulty <Kieran.McNulty@windriver.com>
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Add a polling check on tracebacks in a build's log. This
can for example indicate that bitbake crashed, which would
stop the event stream that Toaster normally uses to detect
build errors.
[YOCTO #14085]
(Bitbake rev: 32b1c0b3477e359d2e2a61a23a294e317e417f95)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Follow the default guidelines from Django 3.2 setting DEFAULT_AUTO_FIELD
to django.db.models.BigAutoField which leads to these migrations.
(Bitbake rev: ccfdcf5ed6b5d2024c268bace30e53753d1f4da4)
Signed-off-by: Tim Orling <tim.orling@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In line with the inclusive language migration defined at:
https://wiki.yoctoproject.org/wiki/Inclusive_language
replace the remaining usage of "abort" in documentation, error
messages, and comments with halt/fail/exit as appropriate.
A couple of external Javascript API calls in Toaster remain, as
they cannot currently be changed.
(Bitbake rev: bc27762bf3ffb4a20b58eace5302438c4a526626)
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Toaster migration to Django-2.2. Django-1.x has been deprecated.
[YOCTO #13207]
(Bitbake rev: 9730f95686b2ac72cf1fa513c555f7c7787e2667)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Removed the deprecated methods as it will only cause problems later on,
and since warn() just calls warning(), it shouldn't change anything
(Bitbake rev: a194f275235f22411cb2368f06a44f61ceb6a0f3)
Signed-off-by: Frazer Clews <frazer.clews@codethink.co.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
amend the code to handle singleton comparisons properly so it only checks
if they only refer to the same object or not, and not bother
comparing the values.
(Bitbake rev: b809a6812aa15a8a9af97bc382cc4b19571e6bfc)
Signed-off-by: Frazer Clews <frazer.clews@codethink.co.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
removed unused imports which made the code harder to read, and slightly
but less efficient
(Bitbake rev: 4367692a932ac135c5aa4f9f2a4e4f0150f76697)
Signed-off-by: Frazer Clews <frazer.clews@codethink.co.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are much better ways to handle this and most editors shouldn't need this
in modern times, drop the noise from the files. Its not consitently applied
anyway.
(Bitbake rev: 5e43070e3087d09aea2f459b033d035c5ef747d0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the introduction of SPDX-License-Identifier headers, we don't need a ton
of header boilerplate in every file. Simplify the files and rely on the top
level for the full licence text.
(Bitbake rev: 695d84397b68cc003186e22f395caa378b06bc75)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This adds the SPDX-License-Identifier license headers to the majority of
our source files to make it clearer exactly which license files are under.
The bulk of the files are under GPL v2.0 with one found to be under V2.0
or later, some under MIT and some have dual license. There are some files
which are potentially harder to classify where we've imported upstream code
and those can be handled specifically in later commits.
The COPYING file is replaced with LICENSE.X files which contain the full
license texts.
(Bitbake rev: ff237c33337f4da2ca06c3a2c49699bc26608a6b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Toaster users behind firewalls that block "git" access usually
require developers to add remap rules in their "~/.gitconfig"
to remap GIT accesses to HTTP* access. However, there is a
"git remote" test in Toaster that is not aware of such remaps,
resulting in a false error.
For now, disable this nice-to-have check to support this release,
and re-enable when we can add remapping accommodations for this
test.
[YOCTO #12944]
(Bitbake rev: abccd40536b366a418802c5ba8427454c2e3bb2c)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Enable the ability to select an existing build directory into Toaster.
This opens to the user the backend features of 12823, for command line
user compatibility.
Enable the ability to select saving Toaster settings in the regular
"bblayers.conf" and "local.conf" instead of the default
"toaster_bblayers.conf" and "toaster.conf". This opens to the user the
backend features of 12821, for command line user compatibility.
[YOCTO #12902]
(Bitbake rev: 8ce51fbd92ab42365a38e0c1c260bb4979377a89)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This change allows the CUSTOM_XML_ONLY toaster setting to be
provided through the environment so the user can do this without
mingling with the settings.xml, for scenarios where modifying
settings.xml is not achievable.
[YOCTO #12891]
(Bitbake rev: 55333f1c3ded1c53120e6cb32b440cc707521e2b)
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The current mechanism for finding the bitbake binary
assumes a directory structure which is identical to
poky, where oe-core's meta and bitbake directories are
at the same level. There can be a case where bitbake
is used from elsewhere and in such cases the above
mentioned assumption fails to hold, whereas this is
totally allowed by the oe-init-build-env script which
can take bitbakedir as an argument.
The better approach is to allow bitbake to be derived
from PATH, while keeping the older mechanism in place so
it can be removed after tests are done in various
environments. This makes more sense as toaster has
also been launched from the same bitbake instance
that is the one in PATH.
[YOCTO #12891]
(Bitbake rev: 365d8d94ae3e4e0f95e0806dbcb7c77c20a55d2d)
Signed-off-by: Awais Belal <awais_belal@mentor.com>
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Toaster depends on pokydirname for identifying the location of
the oe-init-build-env script (and there might be other purposes
in the future). The problem with current approach is that it
only checks/sets the variable with git based repos, whereas
toaster provides mechanisms to allow having layers that are all
locally available. The evaluation of the variable fails in such
scenarios, so use a more flexible mechanism in this case and
try to locate poky in the local layers as well, if not already
set.
[YOCTO #12891]
(Bitbake rev: 6c3c196b28603591371ec7e62871fbb4296f2c71)
Signed-off-by: Awais Belal <awais.belal@mentor.com>
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
enhancements and defects.
Here is the primary driving enhancement:
* Bug 12785 - Support Project Specific configuration for external
tools (e.g. ISS, Eclipse)
- Isolated project-specific configuration page (full Toaster context
hidden)
- Support for new project, reconfigure existing project, and import
existing command line project
- Ability to define variables (e.g. image recipe) and pass them back
to external GUI
- Ability to execute the cloning phase, so that external GUI receive
a buildable project
- Ability to call back to the external GUI when updates are completed
and ready
- Compatibility of above projects with the normal full Toaster interface
- Ability to pass to a 'complete' or 'cancel' web page so that the
external GUI can immediately stop that Toaster instance, and not
leave dangling servers nor edit sessions open
Here are the supporting enhancements, where at least the
back end is implemented:
* Bug 12821 - Make Toaster conf changes compatible with command line usage
* Bug 12822 - Support importing user changes to conf files into Toaster
* Bug 12823 - Support importing user build directories into Toaster
* Bug 12824 - Scan imported layers for content so that they are
immediately available
* Bug 12825 - show layer clone item in progress bar
Here are defects fixed:
* Bug 12817 - builddelete.py requires explicit 'add_arguments'
* Bug 12818 - Remove orphaned imported layers when project is deleted
* Bug 12826 - fix imported layer management
* Bug 12819 - build using selected bitbake env, not Toaster's env
* Bug 12820 - Toaster randomizes the layer order in toaster_bblayers.conf
[YOCTO #12785]
(Bitbake rev: 985d6cec290bdd80998a63483561a73c75d82d65)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Explicitly capture and ignore errors when trying to load the optional
'custom.xml' fixture file.
[YOCTO #12554]
(Bitbake rev: 132458939d3987ebc58685397714af3d6d5cd8fd)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The '--all'' fetches all remotes, including the ones in $HOME/.gitconfig, which
causes the fetching very slow, so don't use "--all", git fetch should be
enough.
(Bitbake rev: 038a5f4b767df7944e73b2e859ac3af2d3a08bf1)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Allow for custom environment additions for git cloning, for example
for anspass support.
[YOCTO #12193]
(Bitbake rev: b4717888c55681a49803c4842140af644a5cdc71)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
compatibility
The latest build enviroment script is now setting BBPATH. This breaks
building previous releases from a master-based Toaster, because with this
newly inherited BBPATH value the 'bitbake.lock' file ends up in the
Toaster build directory instead of the project's build directory.
Toaster should always clear BBPATH so that the bbserver's environment
is clean (enough).
[YOCTO #12363]
(Bitbake rev: 21dde782c049108dd9455ffbf431de214437e800)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The bitbake server changed such that the Toaster custom settings from
'toaster.conf' and 'toaster-bblayers.conf' that were set when
the '--server-only' mode was started were lost when the subsequent build
request happened, resulting in builds missing all custom changes.
This patch asserts those environment settings in both server calls.
[YOCTO #12194]
(Bitbake rev: fa767d85f19a7af92a44fe11fdfb38633009ad71)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Stop the pending build and report to the user if there is
an internal exception due to a git error, a bitbake server
error, or if the server-only mode halts due to for example
a user syntax error in a layer or recipe.
These exceptions were not caught because they occure before
the normal toastergui processing was started.
[YOCTO #12056]
(Bitbake rev: 2cd664097c29ad07b08c82d07a239ca199abbc9a)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If no external layers are defined, pokydirname is not set. Rectify
this by taking the 'be.sourcedir' as the pokydirname.
[YOCTO #12015]
(Bitbake rev: 3b0f04c7b00aaf44ba146c432fcb5d6fd7dafcea)
Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com>
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
One of the debug messages during build contains a list of all layers
but without spaces or other separators between them. Use pformat
instead.
[YOCTO #12014]
(Bitbake rev: 9fe38f94b54a8644ac6f493c49e63dd6da5bfbdf)
Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com>
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Toaster needs to allow the custom fixture file to specific an
alternate Layer Index URL for users that host their own Layer
Index Server via the 'CUSTOM_LAYERINDEX_SERVER' in
'custom.xml'.
Toaster also needs to allow the ability to completely override
the default fixture files, otherwise that content can leak into
the custom environment (by default the custom fixture is an
overlay that cannot remove existing values from the default
fixture) via the 'CUSTOM_XML_ONLY' value in 'setting.xml'.
[YOCTO #11938]
(Bitbake rev: ac29d4a9078494544a2627d8b6b021096b49cb34)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The bitbake option "-t SERVERTYPE" was deprecated and can be
removed since the desired XMLRPC listener now the default.
The bitbake server port cannot be "-1" anymore and must be
explicitly passed.
There is a race condition for the bblock file to not only
be created but to actually be populated, so a delay test loop
is required (usually only one pass).
The 'xmlrpcclient' is now the class that allows Toaster to for
example kill builds.
The events for populating the recipe parsing now either show only
the final result or are skipped entiredly, so the progress
calculator needs to be changed to not block on the parsing phase.
[YOCTO #11851]
(Bitbake rev: 2aa7ad38f760ec003fb18faa5aa0014cff191a7a)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a project has a lot of additional layers, the build may
appear to hang while those layers are checked out.
This patch adds a clone progress bar that is visible before
the parsing progress appears.
[YOCTO #9916]
(Bitbake rev: 0c94d947b74c4dee23d7b9d255facd3cf839ccbe)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are four main API deprecations in Django-1.10:
(a) String view arguments to url() must be replaced by
the explicit class reference
(b) New TEMPLATES stucture in settings.py consolidates
TEMPLATE_DIRS, TEMPLATE_CONTEXT_PROCESSORS,
TEMPLATE_LOADERS, TEMPLATE_STRING_IF_INVALID, and
TEMPLATE_DEBUG
(c) patterns() wrapper in url() is removed, with
urlpatterns now a simple list
(d) NoArgsCommand in commands() must be replace by
BaseCommand, and handle_noargs() changed to
handle()
Also, the Django version checker must be updated to accept
two digit sub-version numbers (e.g. "1.8" < "1.10")
[YOCTO #11684]
(Bitbake rev: e4c7a94fac7a53fc146387a57e5a09b9ec3caca0)
Signed-off-by: David Reyna <David.Reyna@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
function
Move the custom image file creation (i.e. create the layer file
structure, conf and recipe file) into it's own function and remove the
creation of the BRLayer as this is done at schedule_build just like all
the other layers.
Fix a bug where the toaster-custom-images layer was always being appened
to the layer list if the directory exists.
(Bitbake rev: 15a42b36c01fccd79e5aa0788dea5640b253982b)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This fixes the unidentified layers issue by making the
toaster-custom-images layer a local layer. By doing this we also fix the
git assumptions made for the local layers which stop recipes and other
meta data being associated with them. This also removed some of the
special casing previously needed when we didn't have the concept of a
local (non git) layer.
Also rename created flag var to a have a different var for each returned
value so that the same value isn't used multiple times.
[YOCTO #10220]
(Bitbake rev: ba5332d4960d7f4f79aef63136796e2fa67284e3)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
toaster-bblayers.conf
Instead of updating conf/bblayers, here we update toaster-bblayers.conf
file. So extra effort to update bblayers.conf can be removed safely.
(Bitbake rev: f3e99d820f3798869a2a1d1604709c1c324dbbab)
Signed-off-by: Sujith H <sujith.h@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When passed variable CUSTOM_BUILD_INIT_SCRIPT to toaster
setting, it would be nice to use it. Else toaster
can use oe-init script. This gives an oppurtunity to
use customized build init scritps.
(Bitbake rev: 9d168bb5f05453bdb7156793eea25da0a3119b4d)
Signed-off-by: Sujith H <sujith.h@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Write the pid file out in the start up of this management command. This
ensures this has happened instead of relying on the shell command having
been run which may or may not be the case. This also makes it simpler for
testing.
Couple of clean ups of runbuilds as identified by pyflake
(Bitbake rev: 999e980ee1a58d16f33ef6c0e41aecdcd0206f39)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
It doesn't work nor does it test anything useful
(Bitbake rev: cf727757767d96b2cd2055f519289712bdf0e505)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Replaced '+' -> '_' to avoid having '+' in folder name.
Thanks Stephan Dünner for this fix.
(Bitbake rev: 858ade277d3bd62e84d3d78e9302f766c1b31dfb)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
These "validation" messages are shown regardless as to whether the
settings are being correctly set or not.
For the time being remove them.
[YOCTO #9097]
(Bitbake rev: c57f20f9cd7cb4ea4d285291a1e71e5df7152799)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: bavery <brian.avery@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed pylint warning: W0611(unused-import): Unused import
(Bitbake rev: 49731a1a2b2b63c1a897d2e33bca4968524e8710)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fixed following pylint warnings:
C0330(bad-continuation): Wrong hanging indentation before block.
C0326(bad-whitespace): No space allowed around keyword argument assignment
C0326(bad-whitespace): Exactly one space required before assignment
C0301(line-too-long): Line too long
(Bitbake rev: 0eecd660e374a4dbcefe4c59f4c8654bf3a0e937)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If Toaster is stopped incorrectly there could be some
build requests and builds in incorrect state left from the previous run.
Running main processing function on start should take care of those.
(Bitbake rev: 6b9f8f6bb51d1aa2ca4effc34e076e331d0cb8d1)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Run main processing function 'runbuild' only if SIGUSR1 is
received. This signal is sent by Toaster when build status
is changed (either started, cancelled or finished).
This should stop continuous database polling as run_builds function
will be called only when needed, i.e. after build status is changed.
[YOCTO #8918]
(Bitbake rev: 62d598cc5aa01d23f1e9284e9e926bd55b1d1878)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Toaster checks gir repository url is the same as locally cloned before
checking it out to existing local clone. This check can be skipped if
commit is 'HEAD' as in this case repository is not hard reset to
commit, so the local clone won't be changed.
[YOCTO #10163]
(Bitbake rev: 7e9a89e3fde5e71cb859799635974ec41790c44d)
Signed-off-by: Ed Bartosh <ed.bartosh@linux.intel.com>
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
for BRLayer'
(Bitbake rev: 3c762873bb8dc8a3cf89b26579a38d58f6731e04)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We don't need to force everyone to use git for the method in which
openembedded-core is downloaded. For instance it could have been
downloaded and extracted as a tarball.
(Bitbake rev: 8b7180332691a41a013e07a52b26018402141b6a)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We no longer only deal with layers that have their source in a gir
repository, we also allow for local directories too so update the
BRLayer model to reflect this.
(Bitbake rev: a15f61f3ef5a87b87121457f76592c87f0ea5d7f)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Due to a copy paste error we managed to get some of the wrong
information in the oe fixture that provides a suggested default settings
for Toaster. This meant it tested correctly when it shouldn't have.
Fix:
- The use of local bitbake
- An incorrect call to realpath which didn't include its parent module.
- The field used for the local_dir of an existing openembedded-core
(Bitbake rev: d57a9124650e5367919668dfccf6aad4962a77f1)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Sync the BRLayer object with the new field added to the Layer object.
The BRLayer (BuildRequest Layers) are snapshots of the layers in the
project at build time and therefore need to mirror the required fields
of the layer object.
(Bitbake rev: a3112c922f036425977abffa0137b9133f61fcd6)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Collect the dir path imported from UI and make
sure that its getting added to bblayers.conf.
This patch exactly does the same job. Any layer
which is imported locally need not be cloned
again to _toaster_clones dir.
[YOCO #9911]
(Bitbake rev: 5669157994fc220a018e37927600988f3fd43271)
Signed-off-by: Sujith H <sujith.h@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The most recent builds area of the all builds and project builds
table needs to update as a build progresses. It also needs
additional functionality to show other states (e.g. recipe parsing,
queued) which again needs to update on the client side.
Rather than add to the existing mix of server-side templating
with client-side DOM updating, translate all of the server-side
templates to client-side ones (jsrender), and add logic which
updates the most recent builds area as the state of a build changes.
Add a JSON API for mostrecentbuilds, which returns the state of
all "recent" builds. Fetch this via Ajax from the build dashboard
(rather than fetching the ad hoc API as in the previous version).
Then, as new states for builds are fetched via Ajax, determine
whether the build state has changed completely, or whether the progress
has just updated. If the state completely changed, re-render the
template on the client side for that build. If only the progress
changed, just update the progress bar. (NB this fixes the
task progress bar so it works for the project builds and all builds
pages.)
In cases where the builds table needs to update as the result of
a build finishing, reload the whole page.
This work highlighted a variety of other issues, such as
build requests not being able to change state as necessary. This
was one part of the cause of the "cancelling build..." state
being fragile and disappearing entirely when the page refreshed.
The cancelling state now persists between page reloads, as the
logic for determining whether a build is cancelling is now on
the Build object itself.
Note that jsrender is redistributed as part of Toaster, so
a note was added to LICENSE to that effect.
[YOCTO #9631]
(Bitbake rev: c868ea036aa34b387a72ec5116a66b2cd863995b)
Signed-off-by: Elliot Smith <elliot.smith@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This has been replaced using django's inbuilt loaddata.
Django command documented at:
https://docs.djangoproject.com/en/1.8/ref/django-admin/#django-admin-loaddata
(Bitbake rev: 3edd33aff2b9eef82090dc4f9b5461f901aec8be)
Signed-off-by: Michael Wood <michael.g.wood@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|