| Age | Commit message (Collapse) | Author |
|---|
|
A recipe variable handles its dependencies even on the "contains"
variables within the "inline Python expressions" like bb.utils.filter().
And it also handles those in the append operator correctly, but the
problem is that it does not so in the remove operator.
Fix it by adding the missing dependencies every time the remove
operator has been handled.
Also add a test case to check if the override operators handle
dependencies correctly.
(Bitbake rev: b90520eedb1dbc7f6a3928d089fe74fafb864eb5)
Signed-off-by: Insu Park <insu0.park@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently the export/unexport/network flags are acted on only by presence
or lack of in the data store. This is deliberate due to performance reasons
since a given recipe shell task might export ~80-90 variables and this means
expanding flags for every one of them.
This does catch users unaware since values which expand to nothing don't work
e.g. ${@""} and setting values to "0" wouldn't work either.
The downside to this patch is slow down in parsing speed of around 4%.
The network flag is easier to change and doesn't affect performance, it was
made to operate the same as export/unexport for consitency reasons.
(Bitbake rev: 3d96c07f9fd4ba1a84826811d14bb4e98ad58846)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
optimisation
Currently the codeparser cache ends up being extended for every parse run
since there are values in the functions such as the result of os.getpid()
from LOGFIFO in OE-Core.
Digging into that issue, there are also lots of similar but different
functions being parsed where the change might just be a path to WORKDIR,
a change in PN or PV or something like DATE/TIME.
There is no reason we have to use these changing values when computing the
dependenies of the functions. Even with a small tweak like:
BB_HASH_CODEPARSER_VALS = "LOGFIFO=/ T=/ WORKDIR=/ DATE=1234 TIME=1234 PV=0.0-1 PN=nopn"
the cache is reduced from ~4.6MB, increasing by ~300kb for every parse run
to around 1.3MB and remaining static for oe-core and meta-oe. In my local
build, admittedly heavily experimented with, the cache had grown to 120MB.
The benefits of doing this are:
* faster load time for bitbake since the cache is smaller to read from disk
and load into memory
* being able to skip saving the cache upon shutdown
* lower memory footprint for bitbake
* faster codeparser data lookups (since there is less data to search)
We only use these special values when passing code fragments to the codeparser
to parse so the real variable values should otherwise be used in the hash data.
The overall effect of this change, combined with others to avoid saving unchanged
cache files can be ~2s on a ~16s parse on my local system and results in a more
responsive feeling bitbake. It also allows parsing performance to be investigated
more consistently.
(Bitbake rev: f24bbaaddb36f479a59a958e7fc90ef454c19473)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Moving code into python modules is a very effective way to reduce parsing
time and overhead in recipes. The downside has always been that any
dependency information on which variables those functions access is lost
and the hashes can therefore become less reliable.
This patch adds parsing of the imported module functions and that dependency
information is them injected back into the hash dependency information.
Intermodule function references are resolved to the full function
call names in our module namespace to ensure interfunction dependencies
are correctly handled too.
(Bitbake rev: 605c478ce14cdc3c02d6ef6d57146a76d436a83c)
(Bitbake rev: 91441e157e495b02db44e19e836afad366ee8924)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make a small change in the layout of the code in build_dependencies
which makes subsequent patches easier to read. No functionality change,
just moving the function definitions to the start of the function block.
(Bitbake rev: fff13b1e5e8397130b4378e0ba2301336ec651a2)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This code looks like it is from a time when the data module was executable.
Nobody does that now and this usage of pydoc is long since obsolete/broken
so clean up the code which doesn't do anything useful.
(Bitbake rev: 6f4ef770641a9657edaf8618f4c86dfb1116622c)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Python handles frozensets a little more optimally than normal sets. Once we
finish parsing, we don't edit this data so we can convert to them.
To do that, we need to stop changing them so process ignore_deps earlier
then we can freeze the data and keep it frozen.
This has the side effect that we need to be careful to sort the data
in some of the variables when calculating the hashes.
Overall this does seem to show a decent parsing time speed improvement
of 20-25% in a local test but this would be highly setup dependent.
Also ensure the sigdata can handle exported frozenset and make it import
back to them instead of sets.
(Bitbake rev: 19475627c363a52da49ec144422c87448ff2a6c5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
references
We dropped the update_data calls a while ago. Clean up the code
to match the reality and drop the remaining no-op pieces. Update
the comments to reflect the slowest operations and let the cookie
monster's spirit live on!
(Bitbake rev: 584989ed2b5af4e8799571dece0cf94f995ef14e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
First, commit 81efd77987f6decf256967fa16521a40c14d3518 created a copy
of __expand_var_regexp__ and __expand_python_regexp__ when creating
the initial version of data_smart.py. A while later commit
db1c998b31da06d7f3eb09fc6f59a1915b7b549e dropped all references to
these variables from data.py.
This leaves us today with two versions of these variables in the
global scope. However, only those defined in data_smart.py are being
used, in data_smart.py.
Unfortunately there was no indication in the commit log for commit
db1c998b31da indicating why the variables were left in place despite
the functions referencing them were being removed. Additionally
data.py imports data_smart, thus the versions of __expand_var_regexp__
and __expand_python_regexp__ defined in data_smart.py would be used by
all bitbake code, beyond, potentially, some code in data.py which we
know has no references to these variables.
To remove any potential confusion around these variables drop the old
definitions from data.py.
(Bitbake rev: 60f43d0428d43c981b44b6c8d125f77440f6c8f9)
Signed-off-by: Mark Asselstine <mark.asselstine@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We have some confusion for users since some classes are meant to work
in the configuration space (or "globally") and some are meant to be
selected by recipes individually.
The cleanest way I could find to clarify this is to create "classes-global"
and "classes-recipe" directories which contain the approproate classes and
have bitbake switch scope between them at the appropriate point during
parsing. The existing "classes" directory is always searched as a fallback.
Once a class is moved to a specific directory, it will no longer be found
in the incorrect context. A good example from OE is that
INHERIT += "testimage"
will no longer work but
IMAGE_CLASSES += "testimage"
will, which makes the global scope cleaner by only including it where it
is useful and intended to be used (images).
(Bitbake rev: f33ce7e742f46635658c400b82558cf822690b5e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If SRC_URI contains python function that extends vardepvalueexclude its
value is being tracked by sstate-cache, which can lead to rebuilds if
value is set dynamically (for example gerrit replicas).
Return empty string if vardepvalueexclude is checked to fix this
behaviour.
(Bitbake rev: f5f9a7b89a7d8321f03184e61ad6d5ed8d0f840e)
Signed-off-by: Tomasz Dziendzielski <tomasz.dziendzielski@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This was only meant to be added for the handle_contains function in
a previous commit, fix it.
(Bitbake rev: 7399be398df39bc29e1b5eaac23b29cfae017abd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
contains items
Adding bb.utils.filter('WARN_QA', 'patch-fuzz', d) when WARN_QA is in
BB_BASEHASH_IGNORE_VARS or in vardepsexclude should not add a dependency
on WARN_QA.
Fix it and add some tests.
(Bitbake rev: 6aecc2fe51a52020f6f13be08449e18d42e7a6b5)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
In line with the inclusive language migration defined at:
https://wiki.yoctoproject.org/wiki/Inclusive_language
rename:
BB_HASHBASE_WHITELIST -> BB_BASEHASH_IGNORE_VARS
BB_HASHTASK_WHITELIST -> BB_TASKHASH_IGNORE_TASKS
the derived code variables basewhitelist and taskwhitelist have been
renamed to basehash_ignore_vars and taskhash_ignore_tasks,
respectively.
[RP: Added compatibility mapping code and tweaked naming]
(Bitbake rev: efaafc9ec2e8c0475e3fb27e877a1c0a5532a0e5)
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Python scales badly when concatinating strings in loops. Most of these
references aren't problematic but at least one (in data.py) is probably
a performance issue as the issue is compounded as strings become large.
The way to handle this in python is to create lists which don't reconstruct
all the objects when appending to them. We may as well fix all the references
since it stops them being copy/pasted into something problematic in the future.
This patch was based on issues highligthted by a report from AWS Codeguru.
(Bitbake rev: d654139a833127b16274dca0ccbbab7e3bb33ed0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
When writing functions into shell scripts, write then in a deterministic
order. This is unlikely to affect anything at runtime but it does change
the signatures of the generated useradd postinst scripts in OE-Core and is
a good thing to be consistent about in general.
(Bitbake rev: 8a181dc8f3c8c9c9885ea3011cb234321a296d92)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Make it easier for users to debug shell task failure by including
some breadcrumbs in the emitted .run file that (hopefully) points
to the .bb/.bbclass file where the shell function was defined.
Unfortunately this won't work with functions with _append
or _prepends, since BitBake wipes the filename/lineno information.
This shouldn't be too hard to fix; for now, you'll just see
comments like this for such functions:
[YOCTO #7877]
(Bitbake rev: 9747211cbb45401cbf4dd0409e9c80c648a178c6)
Signed-off-by: Chris Laplante <chris.laplante@agilent.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If a variable is in the signature whitelist, we'd currently expand
it, then later ignore the data. This is problemtic for code which
has effects when expanded, recently source date epoch in OE-Core
for example.
We don't actually need to do this, if we pass the whitelist into
the earlier function it can avoid the expansion. This also also
give a small performance boost since we avoid running code in some
cases.
[YOCTO #13581]
(Bitbake rev: f483ee4a869fb1dafbe4bdf2da228cdaa40b38bd)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
amend the code to handle singleton comparisons properly so it only checks
if they only refer to the same object or not, and not bother
comparing the values.
(Bitbake rev: b809a6812aa15a8a9af97bc382cc4b19571e6bfc)
Signed-off-by: Frazer Clews <frazer.clews@codethink.co.uk>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Its hard to see what this exception adds in the current codebase. The logfile
attribute is effectively ignored, the exception doesn't serve a defined
purpose and mostly seems to be worked around.
Remove it entirely. If this does cause output problems, we'll figure
out better ways to address those.
(Bitbake rev: cfeffb602dd5319f071cd6bcf84139ec77f2d170)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently siggen uses the format "<filename>.<taskname>" for referencing tasks
whilst runqueue uses "<filename>:<taskname>". This converts to use ":" as the
separator everywhere.
This is an API breaking change since the cache is affected, as are siginfo files
and any custom signature handlers such as those in OE-Core.
Ultimately this will let us clean up and the accessor functions from runqueue,
removing all the ".rsplit(".", 1)[0]" type code currently all over the place.
Once a standard is used everwhere we can update the code over time to be more
optimal.
(Bitbake rev: 07e539e1c566ca3434901e1a00335cb76c69d496)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
There are much better ways to handle this and most editors shouldn't need this
in modern times, drop the noise from the files. Its not consitently applied
anyway.
(Bitbake rev: 5e43070e3087d09aea2f459b033d035c5ef747d0)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
With the introduction of SPDX-License-Identifier headers, we don't need a ton
of header boilerplate in every file. Simplify the files and rely on the top
level for the full licence text.
(Bitbake rev: 695d84397b68cc003186e22f395caa378b06bc75)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This adds the SPDX-License-Identifier license headers to the majority of
our source files to make it clearer exactly which license files are under.
The bulk of the files are under GPL v2.0 with one found to be under V2.0
or later, some under MIT and some have dual license. There are some files
which are potentially harder to classify where we've imported upstream code
and those can be handled specifically in later commits.
The COPYING file is replaced with LICENSE.X files which contain the full
license texts.
(Bitbake rev: ff237c33337f4da2ca06c3a2c49699bc26608a6b)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Similarly to the codeparser change, change to sha256 hashes due to worries
over collisions. The main impact of this change is slightly slower parsing
time as well as longer sstate file names.
(Bitbake rev: 66f1b766997d53b4375fdd25719b1175f3828903)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The previous check was in data.py which only can check code like "python
funcname()" in the dependency chain, but there are 3 kinds of python functions:
- python()
- def py_funcname()
- python funcname()
Add the checking to BBHandler to check and warn for all of them.
The warning looks like:
WARNING: /path/to/recipes-core/busybox/busybox_1.29.2.bb: python should use 4 spaces indentation, but found tabs in busybox.inc, line 75
(Bitbake rev: 0cdc5b81fc1f5e5281a525a657e420ebc3bb9e90)
Signed-off-by: Robert Yang <liezhi.yang@windriver.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
By creating a standalone function, we can add better functional testing
of this code.
(Bitbake rev: 796a20d24dc18479de1975a37b9e52a5ac75c73f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Currently remove operations are not being accounted for in the task
checksums. This is a fairly serious oversight and needs to be fixed.
To do so, we need internal data from getVarFlag combined with the
expanded variable data so that only "active" remove operators are
accounted for in the task checksum. We can get this from the new
optional removes attribute in the returned parser object.
The code can then use the data on active remove operators to account
for the removals in task checksum but only when the removal is active.
We have to be careful here not to reference any expanded data since this
may for example contain build paths. This means we can only map back
and reference the unsplit (and hence unexpanded) remove string which may
expand to multiple removal values.
[YOCTO #12913]
(Bitbake rev: 57d2ee17ae83a139a37081eb082e6184fa883581)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(Bitbake rev: 136100dc932c9019737f927d826955425134010f)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The datastore can assume internal API, this just removes the function indirection
overhead involved in this very common codepath (800,000 calls in parsing OE-Core).
(Bitbake rev: 9a36531ed2b2881a65e5d39ee4b68d2bb392ed78)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Recipes/variables that raise a SkipRecipe exception are intentionally
skipped, and should not generate warnings.
[YOCTO #11319]
(Bitbake rev: edf6e6094a9f7ad4b2ba06eef8fd34756edbedce)
Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The code that determines variable dependencies uses the codeparser to
find references to "contains" type operations e.g. bb.utils.contains().
That function can take multiple items to check, and all specified items
have to be present. However this code didn't handle that - it assumed
that only one item would be specified and thus it was treating the
multiple items as a single item with spaces in between. Split the value
and check if all words are present in order to determine whether the
check is "set" or "unset".
(Bitbake rev: 272f1245acdd4fb85cb78612aa03627a9c246d8f)
Signed-off-by: Paul Eggleton <paul.eggleton@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Displaying the environment data in a sorted manner makes it easier
to compare data between different setups and means you can know
where to find specific entries.
(Bitbake rev: baa417e44b009149eb1dfb07d5a488740b6e68ef)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Various run.do_xxx files export dozens of variables.
Presently they are in random order. Among other things,
this makes it difficult to compare two files for relevant changes.
This patch ensures they are enumerated/printed in a sorted
(alphabetical) order.
(Bitbake rev: 27b501d1400d1942b5ba9f35218ca7aacd9bfefe)
Signed-off-by: Juro Bystricky <juro.bystricky@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
getVarFlag() now defaults to expanding by default, thus remove the
True option from getVarFlag() calls with a regex search and
replace.
Search made with the following regex:
getVarFlag ?\(( ?[^,()]*, ?[^,()]*), True\)
(Bitbake rev: c19baa8c19ea8ab9b9b64fd30298d8764c6fd2cd)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
getVar() now defaults to expanding by default, thus remove the True
option from getVar() calls with a regex search and replace.
Search made with the following regex: getVar ?\(( ?[^,()]*), True\)
(Bitbake rev: 3b45c479de8640f92dd1d9f147b02e1eecfaadc8)
Signed-off-by: Joshua Lock <joshua.g.lock@intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The old style bb.data.getVar/setVar API has long since been deprecated in
favour of d.getVar/setVar and friends.
Now we're about to change the default expansion parameter, drop the old APIs
to simplify the transition and ensure everyone is using the new style functions.
Conversion is trivial if there are remaining stragglers.
I've left bb.data.expand() for now since its more widely used but would make a good
follow up patch series.
(Bitbake rev: 1825604d46fcd29fad6cfd325f1cb1e1b457d2c9)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Fix a bug where a totally wrong value of a variable would be exported if
an exception happened during d.getVar(). Also, print a warning if an
exception happends instead of silently ignoring it. It would probably be
best just to raise the exception, instead, but use the warning for now
in order to avoid breaking existing builds.
[YOCTO #10393]
(Bitbake rev: f639f06cfa280adcc25438387567966271b9b2c3)
Signed-off-by: Markus Lehtonen <markus.lehtonen@linux.intel.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
The value used for exclusion was always being expanded. This is actually
a bad idea since in most cases you'd want to exclude an unexpanded
value and makes it impossible to use the variable as intended.
This adjusts things so the value is not expanded and we can correctly
remove things from checksums much more easily.
(Bitbake rev: 81bc8201c475d2b6bef0168573915ad0140f6dad)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
(Bitbake rev: 4506ccf1495c6ed6e8ed678f4baa166bc94d1761)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
python deprecated logger.warn() in favour of logger.warning(). This is only
used in bitbake code so we may as well just translate everything to avoid
warnings under python 3. Its safe for python 2.7.
(Bitbake rev: 676a5f592e8507e81b8f748d58acfea7572f8796)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This avoids a common issue where PACKAGECONFIG is emitted as a function in
bitbake -e when the 'python' flag exists. It isn't a python function unless
both 'func' and 'python' are set. This aligns with the behavior of
emit_func_python.
(Bitbake rev: c5e45063cb3ae17bbe3304ea5e712bd76e686c4a)
Signed-off-by: Christopher Larson <chris_larson@mentor.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Right now, if you have some python code like:
X = "a"
def somefunction(d):
d.setVar("X", "b")
d.setVar("Y", "${X}")
then any sane person would expect that Y = "b" at the end of the
function. This is not the case, Y = "a".
This is due to the python function being expanded before execution, the
executed code would read d.setVar("Y", "a"). This understandably
confuses people, it also makes it near impossible to write ${} in a
python function without unintended things happening.
I think there is general agreement we should fix this and standardise
on non-expansion of python functions. We already don't expand anonymous
python (mostly).
I've checked OE-Core with buildhistory before and after this change and
there were a small number of issues this exposed which I've sent
patches for.
I propose we default to not expanding python code and then deal with
any consequences from that if/as/where identified. This will improve
new user understanding and usability of the system, it also allows
several long standing weird expansion issues to be fixed.
(Bitbake rev: 8bf33a8e92c0e188fa392030025756196c96fcbb)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Expanding python functions for variable dependencies doesn't really make sense,
not least since this causes execution of any inline python, it also makes it
impossible to write expressions like d.expand("${X}") of d.setVar("X", "${Y}")
which may have the wrong values if expanded now.
This starts to standardise the approach across bitbake for handling python code.
(Bitbake rev: 765a2480dbe288f64562a9611dd93b6b6dd0a64e)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This sets the scene for removing the default False for expansion from
getVarFlag. This would later allow True to become the expand default.
On the most part this is an automatic translation with:
sed -e 's:\(\.getVarFlag([^,()]*, [^,()]*\)):\1, False):g' -i `grep -ril getVar *`
There should be no functional change from this patch.
(Bitbake rev: 7c3b99c6a716095af3ffce0b15110e91fb49c913)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
A newline is always appended to the function body when it's written
out, so strip any trailing newlines which may be there already.
(Bitbake rev: 8a3f50936113e15d2f2822f6aee494204fa1c24f)
Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
This codepath can be triggered by a python indentation error for example.
Showing it as an ExpansionError is misleading.
Change the code to add a warning about where the failure came from (in
particular giving the variable key name that triggered it) but raise the
proper exception.
(Bitbake rev: d49d46533704e8b4404e29abfb5a7383d704c91a)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
If parse_python() fails, the output is confusing. Passing in the extra
file/line data isn't expensive and improves readability significantly.
(Bitbake rev: a4bb753488d322e0e31c31d6377ba780f2f824c4)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
Calling record() for each override alteration is slow. Since we now expand
overrides dynamically we don't have to record the log data at each alteration,
we can instead print it directly from the existing data stores at variable
history print time using the exact same data stores.
This massively improves performance of the data store when parsing
with bitbake -e for example, it will improve memory overhead as well.
The only downside is that VariableHistory has to poke into the datastore
for some of its data but that seems an acceptable tradeoff rather than
double caching.
(Bitbake rev: 100b447a161ef20fa559e39516cd32fa78e38262)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
|
We should use the d.xxxVar syntax rather than the older function style.
Also replace 0/1 with the more pythonic True/False.
No functionality changes.
(Bitbake rev: 90fdd69cca951f8bd2ff634f3b42fccd4fc03095)
Signed-off-by: Richard Purdie <richard.purdie@linuxfoundation.org>
|
Insu Park
Richard Purdie
Mark Asselstine
Tomasz Dziendzielski
Scott Murray
Chris Laplante
Frazer Clews
Robert Yang
Nathan Rossi
Paul Eggleton
Juro Bystricky
Joshua Lock
Markus Lehtonen
Christopher Larson
Andre McCurdy