diff options
Diffstat (limited to 'meta/lib/oeqa/manual/bsp-hw.json')
| -rw-r--r-- | meta/lib/oeqa/manual/bsp-hw.json | 714 |
1 files changed, 70 insertions, 644 deletions
diff --git a/meta/lib/oeqa/manual/bsp-hw.json b/meta/lib/oeqa/manual/bsp-hw.json index a2b1d3e0b0..308a0807f3 100644 --- a/meta/lib/oeqa/manual/bsp-hw.json +++ b/meta/lib/oeqa/manual/bsp-hw.json @@ -1,33 +1,7 @@ [ { "test": { - "@alias": "bsps-hw.bsps-tools.rpm_-__install_dependency_package", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "Get a not previously installed RPM package or build one on local machine, which should have run-time dependency.For example, \"mc\" (Midnight Commander, which is a visual file manager) should depend on \"ncurses-terminfo\". \n\n$ bitbake mc \n\n\n", - "expected_results": "" - }, - "2": { - "action": "Copy the package into a system folder (for example /home/root/rpm_packages). \n\n\n", - "expected_results": "" - }, - "3": { - "action": "Run \"rpm -ivh package_name\" and check the output, for example \"rpm -ivh mc.rpm*\" should report the dependency on \"ncurses-terminfo\".\n\n\n\n", - "expected_results": "3 . rpm command should report message when some RPM installation depends on other packages." - } - }, - "summary": "rpm_-__install_dependency_package" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-runtime.boot_and_install_from_USB", + "@alias": "bsps-hw.bsps-hw.boot_and_install_from_USB", "author": [ { "email": "alexandru.c.georgescu@intel.com", @@ -52,7 +26,7 @@ "expected_results": "" }, "5": { - "action": "Remove USB, and reboot into new installed system. \nNote: If installation was successfully completed and received this message \"\"(sdx): Volume was not properly unmounted...Please run fsck.\"\" ignore it because this was whitelisted according to bug 9652.", + "action": "Remove USB, and reboot into new installed system. \nNote: If installation was successfully completed and received this message \"\"(sdx): Volume was not properly unmounted...Please run fsck.\"\" ignore it because this was allowed according to bug 9652.", "expected_results": "" } }, @@ -61,7 +35,7 @@ }, { "test": { - "@alias": "bsps-hw.bsps-runtime.live_boot_from_USB", + "@alias": "bsps-hw.bsps-hw.live_boot_from_USB", "author": [ { "email": "juan.fernandox.ramos.frayle@intel.com", @@ -87,115 +61,7 @@ }, { "test": { - "@alias": "bsps-hw.bsps-runtime.boot_from_runlevel_3", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "Boot into system and edit /etc/inittab to make sure that system enter at the run level 3 by default, this is done by changing the line \n\n\nid:5:initdefault \n\nto \n\nid:3:initdefault \n\n", - "expected_results": "" - }, - "2": { - "action": "Reboot system, and press \"Tab\" to enter \"grub\"", - "expected_results": "" - }, - "3": { - "action": "Get into the \"kernel\" line with the edit option \"e\" and add \"psplash=false text\" at the end line.", - "expected_results": "" - }, - "4": { - "action": "Press \"F10\" or \"ctrl+x\" to boot system", - "expected_results": "" - }, - "5": { - "action": "If system ask you for a login type \"root\"", - "expected_results": "System should boot to run level 3, showing the command prompt." - } - }, - "summary": "boot_from_runlevel_3" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-runtime.boot_from_runlevel_5", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "Boot into system and edit /etc/inittab to make sure that system enter at the run level 5 by default, this is done by changing the line \n\nid:3:initdefault \n\nto \n\nid:5:initdefault \n\n", - "expected_results": "" - }, - "2": { - "action": "Reboot system, and press \"Tab\" to enter \"grub\"", - "expected_results": "" - }, - "3": { - "action": "Get into the \"kernel\" line with the edit option \"e\" and add \"psplash=false text\" at the end line.", - "expected_results": "" - }, - "4": { - "action": "Press \"F10\" or \"ctrl+x\" to boot system \nNote: The test is only for sato image.", - "expected_results": "System should boot to runlevel 5 ." - } - }, - "summary": "boot_from_runlevel_5" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-runtime.shutdown_system", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "boot system", - "expected_results": "" - }, - "2": { - "action": "launch terminal and run \"shutdown -h now\" or \"poweroff\"", - "expected_results": "System can be shutdown successfully . " - } - }, - "summary": "shutdown_system" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-runtime.reboot_system", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "boot system", - "expected_results": "" - }, - "2": { - "action": "launch terminal and run \"reboot\"", - "expected_results": "System can reboot successfully . " - } - }, - "summary": "reboot_system" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-runtime.switch_among_multi_applications_and_desktop", + "@alias": "bsps-hw.bsps-hw.switch_among_multi_applications_and_desktop", "author": [ { "email": "alexandru.c.georgescu@intel.com", @@ -225,179 +91,7 @@ }, { "test": { - "@alias": "bsps-hw.bsps-runtime.USB_-_mount", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "Boot system \n\n", - "expected_results": "" - }, - "2": { - "action": "Plug USB stick, it should be mount in /run/media/sd(x) If X-window system does not start and show USB device, then use the terminal to mount it, following the next steps: \na. Locate the usb stick (usually it is on /dev/sdb) \nb. Create a directory with \"mkdir stick\" (so you will have such a path as: /home/root/stick). \nc. Run the command \"mount /dev/sdb /home/root/stick\" to mount USB device on it. \n\n", - "expected_results": "USB device should be mounted in /run/media/sd(x) \nor in /home/root/stick \n\n" - }, - "3": { - "action": "Then you can access USB stick (/home/root/stick) via Terminal or GUI and try various commands and actions like \"cp\", \"mv\", \"touch\" and \"rm\". Type \"dmesg\" command and check for recent mounted devices.", - "expected_results": "Basic commands work properly. The system sends a notification in \"dmesg\" command, showing that the USB stick is accessible and the device is mounted ." - } - }, - "summary": "USB_-_mount" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-runtime.USB_-_read_files", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "boot system", - "expected_results": "view/copy successfully" - }, - "2": { - "action": "plug usb stick", - "expected_results": "" - }, - "3": { - "action": "view files in usb by file browser", - "expected_results": "" - }, - "4": { - "action": "copy some files from usb to local hardware", - "expected_results": "" - } - }, - "summary": "USB_-_read_files" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-runtime.USB_-_umount", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "boot system", - "expected_results": "usb directory in file browser automatically missed" - }, - "2": { - "action": "plug usb stick", - "expected_results": "" - }, - "3": { - "action": "view files in usb by file browser \n4.unplug usb", - "expected_results": "" - } - }, - "summary": "USB_-_umount" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-runtime.USB_-_write_files", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "boot system", - "expected_results": "create/copy successfully" - }, - "2": { - "action": "plug usb stick", - "expected_results": "" - }, - "3": { - "action": "create files in usb \n4.copy some files from local hardware to usb", - "expected_results": "" - } - }, - "summary": "USB_-_write_files" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-runtime.ethernet_static_ip_set_in_connman", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "Boot the system and check internet connection is on . ", - "expected_results": "" - }, - "2": { - "action": "Launch connmand-properties (up-right corner on desktop)", - "expected_results": "" - }, - "3": { - "action": "Choose Ethernet device and set a valid static ip address for it. \nFor example, in our internal network, we can set as following: \nip address: 10.239.48.xxx \nMask: 255.255.255.0 \nGateway (Broadcast): 10.239.48.255", - "expected_results": "" - }, - "4": { - "action": "Check the Network configuration with \"ifconfig\"", - "expected_results": "Static IP was set successfully \n" - }, - "5": { - "action": "ping to another IP adress", - "expected_results": "Ping works correclty\n" - } - }, - "summary": "ethernet_static_ip_set_in_connman" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-runtime.ethernet_get_IP_in_connman_via_DHCP", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "Launch connmand-properties (up-right corner on your desktop). ", - "expected_results": "" - }, - "2": { - "action": "Check if Ethernet device can work properly with static IP, doing \"ping XXX.XXX.XXX.XXX\", once this is set.", - "expected_results": "Ping executed successfully . \n\n" - }, - "3": { - "action": "Then choose DHCP method for Ethernet device in connmand-properties.", - "expected_results": "" - }, - "4": { - "action": "Check with 'ifconfig\" and \"ping\" if Ethernet device get IP address via DHCP.", - "expected_results": "Ethernet device can get dynamic IP address via DHCP in connmand ." - } - }, - "summary": "ethernet_get_IP_in_connman_via_DHCP" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-tools.connman_offline_mode_in_connman-gnome", + "@alias": "bsps-hw.bsps-hw.connman_offline_mode_in_connman-gnome", "author": [ { "email": "alexandru.c.georgescu@intel.com", @@ -419,63 +113,7 @@ }, { "test": { - "@alias": "bsps-hw.bsps-runtime.X_server_can_start_up_with_runlevel_5_boot", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "boot up system with default runlevel \n\n", - "expected_results": "X server can start up well and desktop display has no problem . \n\n" - }, - "2": { - "action": "type runlevel at command prompt", - "expected_results": "Output:N 5" - } - }, - "summary": "X_server_can_start_up_with_runlevel_5_boot" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-runtime.standby", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "boot system and launch terminal; check output of \"date\" and launch script \"continue.sh\"", - "expected_results": "" - }, - "2": { - "action": "echo \"mem\" > /sys/power/state", - "expected_results": "" - }, - "3": { - "action": "After system go into S3 mode, move mouse or press any key to make it resume (on NUC press power button)", - "expected_results": "" - }, - "4": { - "action": "Check \"date\" and script \"continue.sh\"", - "expected_results": "" - }, - "5": { - "action": "Check if application can work as normal \ncontinue.sh as below: \n \n#!/bin/sh \n \ni=1 \nwhile [ 0 ] \ndo \n echo $i \n sleep 1 \n i=$((i+1)) \ndone ", - "expected_results": "Screen should resume back and script can run continuously incrementing the i's value from where it was before going to standby state. Date should be the same with the corresponding time increment." - } - }, - "summary": "standby" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-runtime.check_CPU_utilization_after_standby", + "@alias": "bsps-hw.bsps-hw.check_CPU_utilization_after_standby", "author": [ { "email": "alexandru.c.georgescu@intel.com", @@ -505,89 +143,7 @@ }, { "test": { - "@alias": "bsps-hw.bsps-runtime.Test_if_LAN_device_works_well_after_resume_from_suspend_state", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "boot system and launch terminal", - "expected_results": "" - }, - "2": { - "action": "echo \"mem\" > /sys/power/state", - "expected_results": "" - }, - "3": { - "action": "After system go into S3 mode, move mouse or press any key to make it resume", - "expected_results": "" - }, - "4": { - "action": "check ping status \n\nNote: This TC apply only for core-image-full-cmd and core-image-lsb .", - "expected_results": "ping should always work before/after standby" - } - }, - "summary": "Test_if_LAN_device_works_well_after_resume_from_suspend_state" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-runtime.Test_if_usb_hid_device_works_well_after_resume_from_suspend_state", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "boot system and launch terminal", - "expected_results": "" - }, - "2": { - "action": "echo \"mem\" > /sys/power/state", - "expected_results": "" - }, - "3": { - "action": "After system go into S3 mode, resume the device by pressing the power button or using HID devices", - "expected_results": "Devices resumes " - }, - "4": { - "action": "check usb mouse and keyboard", - "expected_results": "Usb mouse and keyboard should work" - } - }, - "summary": "Test_if_usb_hid_device_works_well_after_resume_from_suspend_state" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-tools.click_terminal_icon_on_X_desktop", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "After system launch and X start up, click terminal icon on desktop", - "expected_results": "" - }, - "2": { - "action": "Check if only one terminal window launched and no other problem met", - "expected_results": "There should be no problem after launching terminal . " - } - }, - "summary": "click_terminal_icon_on_X_desktop" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-tools.Add_multiple_files_in_media_player", + "@alias": "bsps-hw.bsps-hw.Add_multiple_files_in_media_player", "author": [ { "email": "alexandru.c.georgescu@intel.com", @@ -613,137 +169,7 @@ }, { "test": { - "@alias": "bsps-hw.bsps-runtime.check_bash_in_image", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "After system is up, check if bash command exists with command \"which bash\"", - "expected_results": "bash command should exist in image giving something as below \"/bin/bash\"" - } - }, - "summary": "check_bash_in_image" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-runtime.MicroSD_-__mount", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "boot system", - "expected_results": "system notify that MicroSDis accessible" - }, - "2": { - "action": "plug MicroSD card", - "expected_results": "" - } - }, - "summary": "MicroSD_-__mount" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-runtime.MicroSD_-__read_files", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "boot system", - "expected_results": "view/copy successfully" - }, - "2": { - "action": "plug MicroSD card", - "expected_results": "" - }, - "3": { - "action": "view files inMicroSD by file browser", - "expected_results": "" - }, - "4": { - "action": "copy some files fromMicroSD to local hardware", - "expected_results": "" - } - }, - "summary": "MicroSD_-__read_files" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-runtime.MicroSD_-__umount", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "boot system", - "expected_results": "MicroSD in file browser automatically missed . " - }, - "2": { - "action": "plug MicroSD card", - "expected_results": "" - }, - "3": { - "action": "view files in MicroSDby file browser", - "expected_results": "" - }, - "4": { - "action": "unplug MicroSD", - "expected_results": "" - } - }, - "summary": "MicroSD_-__umount" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-runtime.MicroSD_-__write_files", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "boot system", - "expected_results": "create/copy successfully" - }, - "2": { - "action": "plug MicroSD card", - "expected_results": "" - }, - "3": { - "action": "create files in MicroSD", - "expected_results": "" - }, - "4": { - "action": "copy some files from local hardware to MicroSD", - "expected_results": "" - } - }, - "summary": "MicroSD_-__write_files" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-tools.video_-_libva_check_(ogg_video_play)", + "@alias": "bsps-hw.bsps-hw.video_-_libva_check_(ogg_video_play)", "author": [ { "email": "alexandru.c.georgescu@intel.com", @@ -769,29 +195,7 @@ }, { "test": { - "@alias": "bsps-hw.bsps-tools.media_player_-_unable_to_play_MPEG-1_without_\"commercial\"_flag", - "author": [ - { - "email": "alexandru.c.georgescu@intel.com", - "name": "alexandru.c.georgescu@intel.com" - } - ], - "execution": { - "1": { - "action": "Copy sample MPEG-1 file to a system without the \"commercial\" flag.", - "expected_results": "" - }, - "2": { - "action": "Launch media player and make sure it cannot play the MPEG-1 file.", - "expected_results": "MPEG-1 file can not be played on images without the \"commercial\" flag. " - } - }, - "summary": "media_player_-_unable_to_play_MPEG-1_without_\"commercial\"_flag" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-tools.media_player_-_play_video_(ogv)", + "@alias": "bsps-hw.bsps-hw.media_player_-_play_video_(ogv)", "author": [ { "email": "alexandru.c.georgescu@intel.com", @@ -813,7 +217,7 @@ }, { "test": { - "@alias": "bsps-hw.bsps-tools.media_player_-_stop/play_button_(ogv)", + "@alias": "bsps-hw.bsps-hw.media_player_-_stop/play_button_(ogv)", "author": [ { "email": "alexandru.c.georgescu@intel.com", @@ -843,7 +247,7 @@ }, { "test": { - "@alias": "bsps-hw.bsps-tools.audio_-_play_(ogg)_with_HDMI", + "@alias": "bsps-hw.bsps-hw.audio_-_play_(ogg)_with_HDMI", "author": [ { "email": "alexandru.c.georgescu@intel.com", @@ -869,7 +273,7 @@ }, { "test": { - "@alias": "bsps-hw.bsps-tools.audio_-_play_(wav)_with_HDMI", + "@alias": "bsps-hw.bsps-hw.audio_-_play_(wav)_with_HDMI", "author": [ { "email": "alexandru.c.georgescu@intel.com", @@ -895,7 +299,7 @@ }, { "test": { - "@alias": "bsps-hw.bsps-tools.Graphics_-_ABAT", + "@alias": "bsps-hw.bsps-hw.Graphics_-_ABAT", "author": [ { "email": "alexandru.c.georgescu@intel.com", @@ -921,7 +325,7 @@ }, { "test": { - "@alias": "bsps-hw.bsps-tools.Graphics_-_x11perf_-_2D", + "@alias": "bsps-hw.bsps-hw.Graphics_-_x11perf_-_2D", "author": [ { "email": "alexandru.c.georgescu@intel.com", @@ -943,33 +347,7 @@ }, { "test": { - "@alias": "bsps-hw.bsps-oe-core.Test_Run_Integrity_-_Check_that_image_is_buildable", - "author": [ - { - "email": "corneliux.stoicescu@intel.com", - "name": "corneliux.stoicescu@intel.com" - } - ], - "execution": { - "1": { - "action": "Check that image can be built using either of the following methods: \n\n", - "expected_results": "" - }, - "2": { - "action": "Check that image is built by autobuilder \nPlease check at: https://autobuilder.yocto.io/pub/releases/ \nChoose the target release that you are validating. \n\n", - "expected_results": "" - }, - "3": { - "action": "Build image yourself \nPreferred to build an core-image-sato-dev to ease the process of the dependent test cases in this run. \nNote: Please set MACHINE in conf/local.conf ", - "expected_results": "If either method fails, this test case will be failed and dependent test cases will be blocked. " - } - }, - "summary": "Test_Run_Integrity_-_Check_that_image_is_buildable" - } - }, - { - "test": { - "@alias": "bsps-hw.bsps-runtime.Check_if_SATA_disk_can_work_correctly", + "@alias": "bsps-hw.bsps-hw.Check_if_SATA_disk_can_work_correctly", "author": [ { "email": "yi.zhao@windriver.com", @@ -999,7 +377,7 @@ }, { "test": { - "@alias": "bsps-hw.bsps-runtime.Install_and_boot_from_USB-drive_to_HDD-drive", + "@alias": "bsps-hw.bsps-hw.Install_and_boot_from_USB-drive_to_HDD-drive", "author": [ { "email": "david.israelx.rodriguez.castellanos@intel.com", @@ -1041,7 +419,7 @@ }, { "test": { - "@alias": "bsps-hw.bsps-runtime.Install_and_boot_from_USB-drive_to_SD-drive", + "@alias": "bsps-hw.bsps-hw.Install_and_boot_from_USB-drive_to_SD-drive", "author": [ { "email": "david.israelx.rodriguez.castellanos@intel.com", @@ -1083,7 +461,7 @@ }, { "test": { - "@alias": "bsps-hw.bsps-runtime.Test_boot_on_serial_communication_SD", + "@alias": "bsps-hw.bsps-hw.Test_boot_on_serial_communication_SD", "author": [ { "email": "juan.fernandox.ramos.frayle@intel.com", @@ -1101,7 +479,7 @@ }, { "test": { - "@alias": "bsps-hw.bsps-runtime.Test_boot_on_serial_communication_HDD", + "@alias": "bsps-hw.bsps-hw.Test_boot_on_serial_communication_HDD", "author": [ { "email": "juan.fernandox.ramos.frayle@intel.com", @@ -1119,7 +497,7 @@ }, { "test": { - "@alias": "bsps-hw.bsps-runtime.Test_boot_on_serial_communication_USB", + "@alias": "bsps-hw.bsps-hw.Test_boot_on_serial_communication_USB", "author": [ { "email": "juan.fernandox.ramos.frayle@intel.com", @@ -1153,7 +531,7 @@ }, { "test": { - "@alias": "bsps-hw.bsps-runtime.Test_Seek_bar_and_volume_control", + "@alias": "bsps-hw.bsps-hw.Test_Seek_bar_and_volume_control", "author": [ { "email": "juan.fernandox.ramos.frayle@intel.com", @@ -1196,5 +574,53 @@ }, "summary": "Test_Seek_bar_and_volume_control" } + }, + { + "test": { + "@alias": "bsps-hw.bsps-hw.Check_if_watchdog_can_reset_the_target_system", + "author": [ + { + "email": "yi.zhao@windriver.com", + "name": "yi.zhao@windriver.com" + } + ], + "execution": { + "1": { + "action": "1.Check if watchdog device exist in /dev/ directory. Run command echo 1 > /dev/watchdog and wait for 60s. Then, the target will reboot.", + "expected_results": "The watchdog device exist in /dev/ directory and can reboot the target.\n" + } + }, + "summary": "Check_if_watchdog_can_reset_the_target_system" + } + }, + { + "test": { + "@alias": "bsps-hw.bsps-hw.System_can_boot_up_via_NFS", + "author": [ + { + "email": "yi.zhao@windriver.com", + "name": "yi.zhao@windriver.com" + } + ], + "execution": { + "1": { + "action": "Connect the board's first serial port to your workstation and then start up your favourite serial terminal so that you will be able to interact with the serial console. If you don't have a favourite, picocom is suggested: $ picocom /dev/ttyS0 -b 115200 ", + "expected_results": "The system can boot up without problem\n" + }, + "2": { + "action": "Power up or reset the board and press a key on the terminal when prompted to get to the U-Boot command line ", + "expected_results": "" + }, + "3": { + "action": "Set up the environment in U-Boot: => setenv ipaddr => setenv serverip ", + "expected_results": "" + }, + "4": { + "action": "Download the kernel and boot: => tftp tftp $loadaddr vmlinux => bootoctlinux $loadaddr coremask=0x3 root=/dev/nfs rw nfsroot=: ip=::::edgerouter:eth0:off mtdparts=phys_mapped_flash:512k(boot0),512k(boot1),64k@3072k(eeprom)\n", + "expected_results": "" + } + }, + "summary": "System_can_boot_up_via_NFS" + } } -]
\ No newline at end of file +] |