diff options
Diffstat (limited to 'ptest-results/pass.fail.busybox')
| -rw-r--r-- | ptest-results/pass.fail.busybox | 518 |
1 files changed, 518 insertions, 0 deletions
diff --git a/ptest-results/pass.fail.busybox b/ptest-results/pass.fail.busybox new file mode 100644 index 00000000000..f58e8f1b510 --- /dev/null +++ b/ptest-results/pass.fail.busybox @@ -0,0 +1,518 @@ +pass: ./busybox-suffix +pass: ./busybox-suffix --help +pass: ./busybox-suffix --help unknown +pass: ./busybox-suffix unknown +pass: Empty file is not a tarball +pass: Empty file is not a tarball.tar.gz +pass: Twenty zeroed blocks is an empty tarball +pass: Two zeroed blocks is a ('truncated') empty tarball +pass: awk 'gcc build bug' +pass: awk -F case 0 +pass: awk -F case 1 +pass: awk -F case 2 +pass: awk -F case 3 +pass: awk -F case 4 +pass: awk -F case 5 +pass: awk -F case 6 +pass: awk -F case 7 +pass: awk -F handles escapes +pass: awk -e and ARGC +pass: awk -f and ARGC +pass: awk FS assignment +pass: awk NF in BEGIN +pass: awk bitwise op +pass: awk break +pass: awk continue +pass: awk floating const with leading zeroes +pass: awk gsub falls back to non-extended-regex +pass: awk handles empty () +pass: awk handles empty function f(arg){} +pass: awk handles non-existing file correctly +pass: awk handles whitespace before array subscript +pass: awk if operator != +pass: awk if operator < +pass: awk if operator == +pass: awk if operator >= +pass: awk if string == +pass: awk large integer +pass: awk length() +pass: awk length(array) +pass: awk long field sep +pass: awk nested loops with the same variable +pass: awk properly handles function from other scope +pass: awk properly handles undefined function +pass: awk string cast (bug 725) +pass: basename-does-not-remove-identical-extension +pass: basename-works +pass: bunzip2-reads-from-standard-input +pass: bunzip2-removes-compressed-file +pass: bunzip2: already exists +pass: bunzip2: delete src +pass: bunzip2: doesnt exist +pass: bunzip2: pbzip_4m_zeros file +pass: bunzip2: stream unpack +pass: bunzip2: test_bz2 file +pass: bunzip2: unknown suffix +pass: busybox +pass: busybox --help +pass: busybox --help unknown +pass: busybox as unknown name +pass: busybox unknown +pass: bzcat can handle compressed zero-length bzip2 files +pass: bzcat can print many files +pass: bzcat-does-not-remove-compressed-file +pass: cat-prints-a-file +pass: cat-prints-a-file-and-standard-input +pass: cmp-detects-difference +pass: cp +pass: cp -H +pass: cp -L +pass: cp -P +pass: cp -R +pass: cp -RH +pass: cp -RHL +pass: cp -RHP +pass: cp -RL +pass: cp -RLH +pass: cp -RP +pass: cp -Rd +pass: cp -d +pass: cp-RHL-does_not_preserve-links +pass: cp-a-files-to-dir +pass: cp-a-preserves-links +pass: cp-copies-empty-file +pass: cp-copies-large-file +pass: cp-copies-small-file +pass: cp-d-files-to-dir +pass: cp-dev-file +pass: cp-dir-create-dir +pass: cp-dir-existing-dir +pass: cp-does-not-copy-unreadable-file +pass: cp-files-to-dir +pass: cp-follows-links +pass: cp-preserves-links +pass: cp-preserves-source-file +pass: cpio extracts in existing directory +pass: cpio extracts zero-sized hardlinks +fail: cpio lists hardlinks +pass: cut '-' (stdin) and multi file handling +pass: cut-cuts-a-character +pass: cut-cuts-a-closed-range +pass: cut-cuts-a-field +pass: cut-cuts-an-open-range +pass: cut-cuts-an-unclosed-range +pass: date-@-works +pass: date-R-works +pass: date-format-works +pass: date-u-works +pass: date-works +pass: date-works-1 +pass: dc basic syntax (argv, multiple args) +pass: dc basic syntax (argv, single arg) +pass: dc basic syntax (stdin, multiple args) +pass: dc complex with spaces (multiple args) +pass: dc complex with spaces (single arg) +pass: dc complex without spaces (multiple args) +pass: dc complex without spaces (single arg) +pass: dd-accepts-if +pass: dd-accepts-of +pass: dd-copies-from-standard-input-to-standard-output +pass: dd-prints-count-to-standard-error +pass: dd-reports-write-errors +pass: diff -B does not ignore changes whose lines are not all blank +pass: diff -B does not ignore non-blank single line change +pass: diff -B ignores blank single line change +pass: diff -B ignores changes whose lines are all blank +pass: diff -b treats EOF as whitespace +pass: diff -b treats all spaces as equal +pass: diff -rN does not read non-regular files +pass: diff always takes context from old file +pass: diff diff1 diff2/ +pass: diff diff1 diff2/subdir +pass: diff dir dir2/file/- +pass: diff of dir and fifo +pass: diff of empty file against nonempty one +pass: diff of empty file against stdin +pass: diff of file and fifo +pass: diff of stdin +pass: diff of stdin, no newline in the file +pass: diff of stdin, twice +pass: dirname-handles-absolute-path +pass: dirname-handles-empty-path +pass: dirname-handles-multiple-slashes +pass: dirname-handles-relative-path +pass: dirname-handles-root +pass: dirname-handles-single-component +pass: dirname-works +pass: du-h-works +pass: du-k-works +pass: du-l-works +pass: du-m-works +pass: du-s-works +pass: du-works +pass: echo-does-not-print-newline +pass: echo-prints-argument +pass: echo-prints-arguments +pass: echo-prints-dash +pass: echo-prints-newline +pass: echo-prints-non-opts +pass: echo-prints-slash-zero +pass: echo-prints-slash_00041 +pass: echo-prints-slash_0041 +pass: echo-prints-slash_041 +pass: echo-prints-slash_41 +pass: egrep is not case insensitive +pass: expr-big +pass: expr-works +pass: false-is-silent +pass: false-returns-failure +pass: find -exec exitcode 1 +pass: find -exec exitcode 2 +pass: find -exec exitcode 3 +pass: find -exec exitcode 4 +pass: find -type f +pass: find-supports-minus-xdev +pass: glibc build sort +pass: glibc build sort unique +pass: grep (default to stdin) +pass: grep (exit success) +pass: grep (exit with error) +pass: grep (no newline at EOL) +pass: grep - (specify stdin) +pass: grep - infile (specify stdin and file) +pass: grep - nofile (specify stdin and nonexisting file) +pass: grep -E -o prints all matches +pass: grep -E supports extended regexps +pass: grep -F handles -i +pass: grep -F handles multiple expessions +pass: grep -Fw doesn't stop on 1st mismatch +pass: grep -Fw matches only words +pass: grep -f EMPTY_FILE +pass: grep -o does not loop forever +pass: grep -o does not loop forever on zero-length match +pass: grep -q - nofile (specify stdin and nonexisting file, match) +pass: grep -q - nofile (specify stdin and nonexisting file, no match) +pass: grep -r on dir/symlink to dir +pass: grep -r on symlink to dir +pass: grep -s nofile (nonexisting file, no match) +pass: grep -s nofile - (stdin and nonexisting file, match) +pass: grep -v -f EMPTY_FILE +pass: grep -w ^ doesn't hang +pass: grep -w ^str doesn't match str not at the beginning +pass: grep -w doesn't stop on 1st mismatch +pass: grep -w word doesn't match wordword +pass: grep -w word match second word +pass: grep -x (full match) +pass: grep -x (partial match 1) +pass: grep -x (partial match 2) +pass: grep -x -F (full match) +pass: grep -x -F (partial match 1) +pass: grep -x -F (partial match 2) +pass: grep can read regexps from stdin +pass: grep handles multiple regexps +pass: grep input (specify file) +pass: grep is also egrep +pass: grep two files +pass: gunzip-reads-from-standard-input +pass: gunzip: already exists +pass: gunzip: delete src +pass: gunzip: doesnt exist +pass: gunzip: stream unpack +pass: gunzip: unknown suffix +pass: gzip-accepts-multiple-files +pass: gzip-accepts-single-minus +pass: gzip-removes-original-file +pass: head-n-works +pass: head-works +fail: hostname-d-works +pass: hostname-i-works +pass: hostname-s-works +pass: hostname-works +pass: id-g-works +pass: id-u-works +pass: id-un-works +pass: id-ur-works +pass: ln-creates-hard-links +pass: ln-creates-soft-links +pass: ln-force-creates-hard-links +pass: ln-force-creates-soft-links +pass: ln-preserves-hard-links +pass: ln-preserves-soft-links +pass: ls symlink_to_dir +pass: ls-1-works +pass: ls-h-works +fail: ls-l-works +fail: ls-s-works +pass: md5sum-verifies-non-binary-file +pass: mkdir-makes-a-directory +pass: mkdir-makes-parent-directories +pass: mv-files-to-dir +pass: mv-follows-links +pass: mv-moves-empty-file +pass: mv-moves-file +pass: mv-moves-hardlinks +pass: mv-moves-large-file +pass: mv-moves-small-file +pass: mv-moves-symlinks +pass: mv-moves-unreadable-files +pass: mv-preserves-links +pass: mv-refuses-mv-dir-to-subdir +pass: mv-removes-source-file +pass: patch -N ignores already applied hunk +pass: patch -R with nonexistent old_file +pass: patch FILE PATCH +pass: patch at the beginning +pass: patch creates new file +pass: patch detects already applied hunk +pass: patch detects already applied hunk at the EOF +pass: patch understands ...dir///dir... +pass: patch with nonexistent old_file +pass: patch with old_file == new_file +pass: pidof (exit with error) +pass: pidof (exit with success) +pass: pidof this +pass: printf aborts on %r +pass: printf aborts on bare % +pass: printf handles %d bad_input +pass: printf produces no further output 1 +pass: printf produces no further output 2 +pass: printf repeatedly uses pattern for each argv +pass: printf understands %*.*f +pass: printf understands %*.*f with negative width/precision +pass: printf understands %*f with negative width +pass: printf understands %.*f with negative precision +pass: printf understands %23.12f +pass: printf understands %Ld +pass: printf understands %b escaped_string +pass: printf understands %d '"x' "'y" "'zTAIL" +pass: printf understands %ld +pass: printf understands %s '"x' "'y" "'zTAIL" +pass: printf understands %zd +pass: pwd-prints-working-directory +pass: readlink -f on a file +pass: readlink -f on a link +pass: readlink -f on a wierd dir +pass: readlink -f on an invalid link +pass: readlink on a file +pass: readlink on a link +pass: rm-removes-file +pass: rmdir-removes-parent-directories +pass: sed -i finishes ranges correctly +pass: sed -i with address modifies all files, not only first +pass: sed -i with no arg [GNUFAIL] +pass: sed -n +pass: sed -n s//p +pass: sed /$_in_regex/ should not match newlines, only end-of-line +pass: sed /regex/,+0<cmd> -i works +pass: sed /regex/,+0{...} -i works +pass: sed /regex/,+N{...} -i works +pass: sed /regex/,+N{...} addresses work +pass: sed /regex/,N{...} addresses work +pass: sed 2d;2,1p (gnu compat) +pass: sed G (append hold space to pattern space) +pass: sed N (flushes pattern space (GNU behavior)) +pass: sed N (stops at end of input) and P (prints to first newline only) +pass: sed N test2 +pass: sed N test3 +fail: sed NUL in command +pass: sed T (!test/branch) +pass: sed a cmd ended by double backslash +pass: sed accepts blanks before command +pass: sed accepts multiple -e +pass: sed accepts newlines in -e +pass: sed address match newline +fail: sed append autoinserts newline +pass: sed autoinsert newline +pass: sed b (branch with no label jumps to end) +pass: sed b (branch) +pass: sed backref from empty s uses range regex +pass: sed backref from empty s uses range regex with newline +pass: sed beginning (^) matches only once +pass: sed c +pass: sed cat plus empty file +pass: sed clusternewline +pass: sed d does not break n,m matching +pass: sed d does not break n,regex matching +pass: sed d does not break n,regex matching #2 +pass: sed d ends script iteration +pass: sed d ends script iteration (2) +fail: sed embedded NUL +pass: sed embedded NUL g +pass: sed empty file plus cat +pass: sed escaped newline in command +pass: sed explicit stdin +pass: sed handles empty lines +pass: sed insert doesn't autoinsert newline +pass: sed leave off trailing newline +pass: sed lie-to-autoconf +pass: sed match EOF +pass: sed match EOF inline +pass: sed match EOF two files +fail: sed n (flushes pattern space, terminates early) +pass: sed n command must reset 'substituted' bit +pass: sed nested {}s +pass: sed no files (stdin) +fail: sed nonexistent label +pass: sed noprint, no match, no newline +pass: sed normal newlines +pass: sed print autoinsert newlines +pass: sed print autoinsert newlines two files +pass: sed s [delimiter] +pass: sed s arbitrary delimiter +pass: sed s chains +pass: sed s chains2 +pass: sed s with \t (GNU ext) +pass: sed s///NUM test +pass: sed s//g (exhaustive) +pass: sed s//p +pass: sed s/xxx/[/ +pass: sed selective matches insert newline +pass: sed selective matches noinsert newline +pass: sed selective matches with one nl +pass: sed stdin twice +pass: sed subst+write +pass: sed t (test/branch clears test bit) +pass: sed t (test/branch) +pass: sed trailing NUL +pass: sed understands \r +pass: sed with N skipping lines past ranges on next cmds +pass: sed with empty match +pass: sed zero chars match/replace advances correctly 1 +pass: sed zero chars match/replace advances correctly 2 +pass: sed zero chars match/replace logic must not falsely trigger here 1 +pass: sed zero chars match/replace logic must not falsely trigger here 2 +pass: seq (exit with error) +pass: seq (exit with error) +pass: seq count by -.9 +pass: seq count by .3 +pass: seq count by .3 with padding 1 +pass: seq count by .3 with padding 2 +pass: seq count by .30 +pass: seq count by .30 to 4.000 +pass: seq count by zero +pass: seq count down by 2 +pass: seq count down by 3 with padding +pass: seq count up by 2 +pass: seq count wrong way #1 +pass: seq count wrong way #2 +pass: seq one argument +pass: seq one argument with padding +pass: seq two arguments +pass: seq two arguments equal +pass: seq two arguments equal, arbitrary negative step +pass: seq two arguments equal, arbitrary positive step +pass: seq two arguments reversed +pass: seq two arguments with padding +pass: sort +pass: sort #2 +pass: sort -u should consider field only when discarding +pass: sort -z outputs NUL terminated lines +pass: sort file in place +pass: sort key doesn't strip leading blanks, disables fallback global sort +pass: sort key range with multiple options +pass: sort key range with numeric option +pass: sort key range with numeric option and global reverse +pass: sort key range with two -k options +pass: sort numeric +pass: sort one key +pass: sort reverse +pass: sort stdin +pass: sort with non-default leading delim 1 +pass: sort with non-default leading delim 2 +pass: sort with non-default leading delim 3 +pass: sort with non-default leading delim 4 +pass: start-stop-daemon -a without -x +pass: start-stop-daemon -x without -a +pass: strings-works-like-GNU +pass: tail-n-works +pass: tail: +N with N > file length +pass: tail: -c +N with largish N +pass: tar extract tgz +pass: tar hardlinks and repeated files +pass: tar hardlinks mode +pass: tar strips /../ on extract +pass: tar symlinks mode +pass: tar writing into read-only dir +pass: tar-archives-multiple-files +pass: tar-complains-about-missing-file +pass: tar-demands-at-least-one-ctx +pass: tar-demands-at-most-one-ctx +pass: tar-extracts-all-subdirs +pass: tar-extracts-file +pass: tar-extracts-from-standard-input +pass: tar-extracts-multiple-files +pass: tar-extracts-to-standard-output +pass: tar-handles-cz-options +pass: tar-handles-empty-include-and-non-empty-exclude-list +pass: tar-handles-exclude-and-extract-lists +pass: tar-handles-multiple-X-options +pass: tar-handles-nested-exclude +pass: tee-appends-input +pass: tee-tees-input +pass: test ! -f: should be false (1) +pass: test ! a = b -a ! c = c: should be false (1) +pass: test ! a = b -a ! c = d: should be true (0) +pass: test !: should be true (0) +pass: test '!' '!' = '!': should be false (1) +pass: test '!' '(' = '(': should be false (1) +pass: test '!' = '!': should be true (0) +pass: test '': should be false (1) +pass: test '(' = '(': should be true (0) +pass: test --help: should be true (0) +pass: test -f = a -o b: should be true (0) +pass: test -f: should be true (0) +pass: test -lt = -gt: should be false (1) +pass: test a -a !: should be true (0) +pass: test a = a: should be true (0) +pass: test a: should be true (0) +pass: test: should be false (1) +pass: touch-creates-file +pass: touch-does-not-create-file +pass: touch-touches-files-after-non-existent-file +pass: tr does not stop after [:digit:] +pass: tr does not treat [] in [a-z] as special +pass: tr has correct xdigit sequence +pass: tr understands 0-9A-F +pass: tr understands [:xdigit:] +pass: tr-d-alnum-works +pass: tr-d-works +pass: tr-non-gnu +pass: tr-rejects-wrong-class +pass: tr-works +pass: true-is-silent +pass: true-returns-success +pass: uniq (default to stdin) +pass: uniq (exit success) +pass: uniq (exit with error) +pass: uniq (stdin) outfile +pass: uniq - (specify stdin) +pass: uniq -c (occurrence count) +pass: uniq -d (dups only) +pass: uniq -f -s (skip fields and chars) +pass: uniq -s -w (skip fields and compare max chars) +pass: uniq -u and -d produce no output +pass: uniq -w (compare max characters) +pass: uniq input (specify file) +pass: uniq input - (specify stdout) +pass: uniq input outfile (two files) +fail: unzip (bad archive) +fail: unzip (subdir only) +pass: uptime-works +pass: wc-counts-all +pass: wc-counts-characters +pass: wc-counts-lines +pass: wc-counts-words +pass: wc-prints-longest-line-length +fail: wget--O-overrides--P +fail: wget-handles-empty-path +fail: wget-retrieves-google-index +fail: wget-supports--P +pass: which-uses-default-path +pass: xargs -E '' +pass: xargs -E _ stops on underscore +pass: xargs -e without param +pass: xargs -s7 can take one-char input +pass: xargs -sNUM test 1 +pass: xargs -sNUM test 2 +pass: xargs does not stop on underscore ('new' GNU behavior) +pass: xargs-works |