diff options
Diffstat (limited to 'meta-xilinx-bsp/conf/machine/zcu111-zynqmp.conf')
| -rw-r--r-- | meta-xilinx-bsp/conf/machine/zcu111-zynqmp.conf | 88 |
1 files changed, 52 insertions, 36 deletions
diff --git a/meta-xilinx-bsp/conf/machine/zcu111-zynqmp.conf b/meta-xilinx-bsp/conf/machine/zcu111-zynqmp.conf index 068e4890..77da93ca 100644 --- a/meta-xilinx-bsp/conf/machine/zcu111-zynqmp.conf +++ b/meta-xilinx-bsp/conf/machine/zcu111-zynqmp.conf @@ -1,38 +1,54 @@ #@TYPE: Machine #@NAME: zcu111-zynqmp -#@DESCRIPTION: Machine support for ZCU111 Evaluation Board. -# - -SOC_VARIANT ?= "dr" - -require conf/machine/include/tune-zynqmp.inc -require conf/machine/include/machine-xilinx-overrides.inc -require conf/machine/include/machine-xilinx-default.inc - -MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost" - -UBOOT_MACHINE = "xilinx_zynqmp_zcu111_revA_defconfig" -SPL_BINARY ?= "spl/boot.bin" - -SERIAL_CONSOLE ?= "115200 ttyPS0" - -SERIAL_CONSOLES_CHECK = "${SERIAL_CONSOLES}" - -KERNEL_DEVICETREE = "xilinx/zynqmp-zcu111-revA.dtb" - -PREFERRED_PROVIDER_virtual/kernel ?= "linux-xlnx" -PREFERRED_PROVIDER_virtual/bootloader ?= "u-boot-xlnx" - -PMU_FIRMWARE_IMAGE_NAME ?= "pmu-firmware-zynqmp-pmu" -PMU_FIRMWARE_DEPLOY_DIR ?= "${TOPDIR}/pmutmp/deploy/images/zynqmp-pmu" - -EXTRA_IMAGEDEPENDS += " \ - u-boot-zynq-uenv \ - arm-trusted-firmware \ - virtual/boot-bin \ - virtual/bootloader \ - " -IMAGE_BOOT_FILES += " \ - uEnv.txt \ - atf-uboot.ub \ - " +#@DESCRIPTION: Machine configuration for the ZCU111 evaluation board. + +#### Preamble +MACHINEOVERRIDES =. "${@['', 'zcu111-zynqmp:']['zcu111-zynqmp' !='${MACHINE}']}" +#### Regular settings follow + +# Variables that changes based on hw design or board specific requirement must be +# defined before calling the required inclusion file else pre-expansion value +# defined in zynqmp-generic.conf will be set. + +# Yocto device-tree variables +YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "psu_uart_0" +YAML_MAIN_MEMORY_CONFIG:pn-device-tree ?= "PSU_DDR_0" +YAML_DT_BOARD_FLAGS ?= "{BOARD zcu111-reva}" + +# Yocto arm-trusted-firmware(TF-A) variables +ATF_CONSOLE ?= "cadence" +TFA_BL33_LOAD ?= "0x8000000" + +# Yocto PMUFW variables +YAML_SERIAL_CONSOLE_STDIN:pn-pmu-firmware ?= "psu_uart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-pmu-firmware ?= "psu_uart_0" + +# Yocto FSBL variables +YAML_SERIAL_CONSOLE_STDIN:pn-fsbl-firmware ?= "psu_uart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-fsbl-firmware ?= "psu_uart_0" + +# Yocto KERNEL Variables +UBOOT_ENTRYPOINT ?= "0x200000" +UBOOT_LOADADDRESS ?= "0x200000" + +# zcu111-zynqmp Serial Console +SERIAL_CONSOLES ?= "115200;ttyPS0" +YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" + +# Required generic machine inclusion +# ZCU111 board uses ZynqMP DR device hence use soc variant based generic machine +# inclusion +require conf/machine/zynqmp-dr-generic.conf + +# This eval board machine conf file uses zcu111-zynqmp xsa as reference input. +# User can override with zcu111 custom xsa using HDF_BASE and HDF_PATH variables +# from local.conf. +HDF_MACHINE = "zcu111-zynqmp" + +# KERNEL_DEVICETREE is disabled as we use board device tree from DTG to match +# the xsa. User can enable explicitly if required from local.conf. +# KERNEL_DEVICETREE = "xilinx/zynqmp-zcu111-revA.dtb" + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' zcu111_zynqmp']['zcu111-zynqmp' != '${MACHINE}']}" |