diff options
Diffstat (limited to 'meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf')
| -rw-r--r-- | meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf | 68 |
1 files changed, 45 insertions, 23 deletions
diff --git a/meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf b/meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf index 27ab2a98..ff273134 100644 --- a/meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf +++ b/meta-xilinx-bsp/conf/machine/zcu106-zynqmp.conf @@ -1,36 +1,58 @@ #@TYPE: Machine #@NAME: zcu106-zynqmp -#@DESCRIPTION: Machine support for ZCU106 Evaluation Board. +#@DESCRIPTION: Machine configuration for the ZCU106 evaluation board. -SOC_VARIANT ?= "ev" +#### Preamble +MACHINEOVERRIDES =. "${@['', 'zcu106-zynqmp:']['zcu106-zynqmp' !='${MACHINE}']}" +#### Regular settings follow -require conf/machine/include/soc-zynqmp.inc -require conf/machine/include/machine-xilinx-default.inc +# Variables that changes based on hw design or board specific requirement must be +# defined before calling the required inclusion file else pre-expansion value +# defined in zynqmp-generic.conf will be set. -MACHINE_FEATURES = "rtc ext2 ext3 vfat usbhost" +# Yocto device-tree variables +YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "psu_uart_0" +YAML_MAIN_MEMORY_CONFIG:pn-device-tree ?= "PSU_DDR_0" +YAML_DT_BOARD_FLAGS ?= "{BOARD zcu106-reva}" -UBOOT_MACHINE = "xilinx_zynqmp_virt_defconfig" -SPL_BINARY ?= "spl/boot.bin" +# Yocto arm-trusted-firmware(TF-A) variables +ATF_CONSOLE ?= "cadence" +TFA_BL33_LOAD ?= "0x8000000" -SERIAL_CONSOLES ?= "115200;ttyPS0" +# Yocto PMUFW variables +YAML_SERIAL_CONSOLE_STDIN:pn-pmu-firmware ?= "psu_uart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-pmu-firmware ?= "psu_uart_0" + +# Yocto FSBL variables +YAML_SERIAL_CONSOLE_STDIN:pn-fsbl-firmware ?= "psu_uart_0" +YAML_SERIAL_CONSOLE_STDOUT:pn-fsbl-firmware ?= "psu_uart_0" -KERNEL_DEVICETREE = "xilinx/zynqmp-zcu106-revA.dtb" +# Yocto KERNEL Variables +UBOOT_ENTRYPOINT ?= "0x200000" +UBOOT_LOADADDRESS ?= "0x200000" -PMU_FIRMWARE_IMAGE_NAME ?= "pmu-firmware-zynqmp-pmu" -PMU_FIRMWARE_DEPLOY_DIR ?= "${TOPDIR}/pmutmp/deploy/images/zynqmp-pmu" +# zcu106-zynqmp Serial Console +SERIAL_CONSOLES ?= "115200;ttyPS0" +YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200" -EXTRA_IMAGEDEPENDS += " \ - u-boot-zynq-uenv \ - arm-trusted-firmware \ - virtual/boot-bin \ - virtual/bootloader \ - u-boot-zynq-scr \ - " +# Required generic machine inclusion +# ZCU106 board uses ZynqMP EV device hence use soc variant based generic machine +# inclusion +require conf/machine/zynqmp-ev-generic.conf -IMAGE_BOOT_FILES += " \ - uEnv.txt \ - atf-uboot.ub \ - boot.scr \ - " +# This eval board machine conf file uses zcu106-zynqmp xsa as reference input. +# User can override with zcu106 custom xsa using HDF_BASE and HDF_PATH variables +# from local.conf. +HDF_MACHINE = "zcu106-zynqmp" +# KERNEL_DEVICETREE is disabled as we use board device tree from DTG to match +# the xsa. User can enable explicitly if required from local.conf. +# KERNEL_DEVICETREE = "xilinx/zynqmp-zcu106-revA.dtb" + +# Yocto IMAGE_FEATURES Variable MACHINE_HWCODECS = "libomxil-xlnx" +IMAGE_FEATURES += "hwcodecs" + +#### No additional settings should be after the Postamble +#### Postamble +PACKAGE_EXTRA_ARCHS:append = "${@['', ' zcu106_zynqmp']['zcu106-zynqmp' != '${MACHINE}']}" |