1 files changed, 55 insertions, 0 deletions
diff --git a/meta-xilinx-bsp/conf/machine/vek280-versal.conf b/meta-xilinx-bsp/conf/machine/vek280-versal.conf
new file mode 100644
index 00000000..ffe2fcb7
--- /dev/null
+++ b/meta-xilinx-bsp/conf/machine/vek280-versal.conf
@@ -0,0 +1,55 @@
+XILINX_DEPRECATED[vek280-versal] = "${@'vek280-versal is not supported in 2023.2' if d.getVar("XILINX_RELEASE_VERSION") == 'v2023.2' else ''}"
+
+#@TYPE: Machine
+#@NAME: vek280-versal
+#@DESCRIPTION: Machine configuration for the VEK280 evaluation boards.
+
+#### Preamble
+MACHINEOVERRIDES =. "${@['', 'vek280-versal:']['vek280-versal' !='${MACHINE}']}"
+#### Regular settings follow
+
+# Variables that changes based on hw design or board specific requirement must be
+# defined before calling the required inclusion file else pre-expansion value
+# defined in versal-generic.conf will be set.
+
+# Yocto device-tree variables
+YAML_CONSOLE_DEVICE_CONFIG:pn-device-tree ?= "CIPS_0_pspmc_0_psv_sbsauart_0"
+YAML_DT_BOARD_FLAGS ?= "{BOARD versal-vek280-revb}"
+
+# Yocto arm-trusted-firmware(TF-A) variables
+ATF_CONSOLE ?= "pl011"
+TFA_BL33_LOAD ?= "0x8000000"
+
+# Yocto PLM variables
+YAML_SERIAL_CONSOLE_STDIN:pn-plm-firmware ?= "CIPS_0_pspmc_0_psv_sbsauart_0"
+YAML_SERIAL_CONSOLE_STDOUT:pn-plm-firmware ?= "CIPS_0_pspmc_0_psv_sbsauart_0"
+
+# Yocto KERNEL Variables
+UBOOT_ENTRYPOINT  ?= "0x200000"
+UBOOT_LOADADDRESS ?= "0x200000"
+
+# vek280-versal Serial Console
+SERIAL_CONSOLES ?= "115200;ttyAMA0"
+YAML_SERIAL_CONSOLE_BAUDRATE ?= "115200"
+
+# Required generic machine inclusion
+require conf/machine/versal-ai-edge-generic.conf
+
+# This machine conf file uses vek280-versal xsa as reference input.
+# User can override with vek280 custom xsa using HDF_BASE and HDF_PATH variables
+# from local.conf.
+HDF_MACHINE = "vek280-versal"
+
+# VEK280 board has 12GB memory only but default versal-generic has QB_MEM set to
+# 8G, Hence we need set 12G in QB_MEM.
+QB_MEM = "-m 12G"
+
+QEMU_HW_DTB_PS = "${QEMU_HW_DTB_PATH}/board-versal-ps-vek280.dtb"
+QEMU_HW_DTB_PMC = "${QEMU_HW_DTB_PATH}/board-versal-pmc-virt.dtb"
+
+# Yocto MACHINE_FEATURES Variable
+MACHINE_FEATURES += "vdu"
+
+#### No additional settings should be after the Postamble
+#### Postamble
+PACKAGE_EXTRA_ARCHS:append = "${@['', ' vek280_versal']['vek280-versal' != '${MACHINE}']}"